[ 0.000000] Linux version 2.6.24-12-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu4)) #1 SMP Wed Mar 12 23:01:54 UTC 2008 (Ubuntu 2.6.24-12.22-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) [ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007ff00000 (usable) [ 0.000000] BIOS-e820: 000000007ff00000 - 000000007ff15000 (ACPI data) [ 0.000000] BIOS-e820: 000000007ff15000 - 000000007ff80000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007ff80000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] 1151MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at 000f8920 [ 0.000000] Entering add_active_range(0, 0, 524032) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 524032 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 524032 [ 0.000000] On node 0 totalpages: 524032 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2302 pages used for memmap [ 0.000000] HighMem zone: 292354 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP signature @ 0xC00F88F0 checksum 0 [ 0.000000] ACPI: RSDP 000F88F0, 0014 (r0 HP ) [ 0.000000] ACPI: RSDT 7FF0BB25, 0040 (r1 HPQOEM SLIC-MPC 6040000 LTP 0) [ 0.000000] ACPI: FACP 7FF14B16, 0074 (r1 HP MCP51M 6040000 PTL_ F4240) [ 0.000000] ACPI: DSDT 7FF0BB65, 8FB1 (r1 HP MCP51M 6040000 MSFT 3000000) [ 0.000000] ACPI: FACS 7FF15FC0, 0040 [ 0.000000] ACPI: SSDT 7FF14B8A, 0206 (r1 PTLTD POWERNOW 6040000 LTP 1) [ 0.000000] ACPI: MCFG 7FF14D90, 003C (r1 HP MCFG 6040000 LTP 0) [ 0.000000] ACPI: HPET 7FF14DCC, 0038 (r1 PTLTD HPETTBL 6040000 LTP 1) [ 0.000000] ACPI: APIC 7FF14E04, 005E (r1 HP APIC 6040000 LTP 0) [ 0.000000] ACPI: BOOT 7FF14E62, 0028 (r1 HP $SBFTBL$ 6040000 LTP 1) [ 0.000000] ACPI: SLIC 7FF14E8A, 0176 (r1 HPQOEM SLIC-MPC 6040000 LTP 1) [ 0.000000] ACPI: DMI detected: Hewlett-Packard [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 15:8 APIC version 16 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 15:8 APIC version 16 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: Skipping IOAPIC probe due to 'noapic' option. [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 [ 0.000000] Using ACPI for processor (LAPIC) configuration information [ 0.000000] Intel MultiProcessor Specification v1.4 [ 0.000000] Virtual Wire compatibility mode. [ 0.000000] OEM ID: nVIDIA Product ID: C51-MCP51 APIC at: 0xFEE00000 [ 0.000000] I/O APIC #2 Version 17 at 0xFEC00000. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Processors: 2 [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) [ 0.000000] swsusp: Registered nosave memory region: 000000000009d000 - 000000000009e000 [ 0.000000] swsusp: Registered nosave memory region: 000000000009e000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000d2000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000d2000 - 0000000000100000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519938 [ 0.000000] Kernel command line: root=UUID=718d681a-24a0-4be7-9515-5c586d7a8c4a ro splash vga=0x318 noapic [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 2009.127 MHz processor. [ 18.864143] spurious 8259A interrupt: IRQ7. [ 18.864167] Console: colour dummy device 80x25 [ 18.864170] console [tty0] enabled [ 18.864624] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 18.864989] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 18.951467] Memory: 2066076k/2096128k available (2164k kernel code, 28808k reserved, 1007k data, 364k init, 1178624k highmem) [ 18.951482] virtual kernel memory layout: [ 18.951483] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB) [ 18.951484] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 18.951485] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 18.951486] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 18.951488] .init : 0xc041f000 - 0xc047a000 ( 364 kB) [ 18.951489] .data : 0xc031d1bd - 0xc0418dc4 (1007 kB) [ 18.951490] .text : 0xc0100000 - 0xc031d1bd (2164 kB) [ 18.951513] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 18.951553] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 18.951694] hpet clockevent registered [ 19.031591] Calibrating delay using timer specific routine.. 4021.78 BogoMIPS (lpj=8043569) [ 19.031616] Security Framework initialized [ 19.031624] SELinux: Disabled at boot. [ 19.031640] AppArmor: AppArmor initialized [ 19.031645] Failure registering capabilities with primary security module. [ 19.031656] Mount-cache hash table entries: 512 [ 19.031770] CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f 00000000 [ 19.031778] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 19.031784] CPU: L2 Cache: 512K (64 bytes/line) [ 19.031789] CPU 0(2) -> Core 0 [ 19.031793] CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001f 00000000 [ 19.031801] Compat vDSO mapped to ffffe000. [ 19.031813] Checking 'hlt' instruction... OK. [ 19.047835] SMP alternatives: switching to UP code [ 19.048979] Early unpacking initramfs... done [ 19.357301] ACPI: Core revision 20070126 [ 19.357374] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 19.359350] ACPI: setting ELCR to 0200 (from 0ca0) [ 19.567831] CPU0: AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping 02 [ 19.567850] SMP alternatives: switching to SMP code [ 19.568282] Booting processor 1/1 eip 3000 [ 19.577397] Initializing CPU#1 [ 19.805701] Calibrating delay using timer specific routine.. 4018.33 BogoMIPS (lpj=8036661) [ 19.805708] CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f 00000000 [ 19.805714] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 19.805716] CPU: L2 Cache: 512K (64 bytes/line) [ 19.805718] CPU 1(2) -> Core 1 [ 19.805720] AMD C1E detected late. Force timer broadcast. [ 19.805721] CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001f 00000000 [ 19.806739] CPU1: AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping 02 [ 19.806771] Total of 2 processors activated (8040.11 BogoMIPS). [ 19.806880] Brought up 2 CPUs [ 19.806904] CPU0 attaching sched-domain: [ 19.806906] domain 0: span 03 [ 19.806908] groups: 01 02 [ 19.806911] CPU1 attaching sched-domain: [ 19.806912] domain 0: span 03 [ 19.806914] groups: 02 01 [ 19.807098] net_namespace: 64 bytes [ 19.807108] Booting paravirtualized kernel on bare hardware [ 19.807547] Time: 7:53:51 Date: 03/13/08 [ 19.807594] NET: Registered protocol family 16 [ 19.807754] EISA bus registered [ 19.807761] ACPI: bus type pci registered [ 19.823327] PCI: BIOS BUG #81[49435000] found [ 19.823332] PCI: Using configuration type 1 [ 19.823336] Setting up standard PCI resources [ 19.824849] ACPI: EC: Look up EC in DSDT [ 19.826468] ACPI: BIOS _OSI(Linux) query ignored via DMI [ 19.826683] ACPI: Interpreter enabled [ 19.826687] ACPI: (supports S0 S3 S4 S5) [ 19.826702] ACPI: Using PIC for interrupt routing [ 19.826449] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 19.833028] ACPI: EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62 [ 19.833039] ACPI: EC: driver started in interrupt mode [ 19.833096] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 19.834375] PCI: Transparent bridge - 0000:00:10.0 [ 19.834394] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 19.834480] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT] [ 19.834502] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR0._PRT] [ 19.834530] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT] [ 19.834557] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT] [ 19.864648] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 19.864808] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 *11 14 15) [ 19.864960] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 *11 14 15) [ 19.865111] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 19.865265] ACPI: PCI Interrupt Link [LK1E] (IRQs 5 7 9 10 *11 14 15) [ 19.865416] ACPI: PCI Interrupt Link [LK2E] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 19.865569] ACPI: PCI Interrupt Link [LK3E] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 19.865723] ACPI: PCI Interrupt Link [LK4E] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 19.865877] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15) [ 19.866029] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 *10 11 14 15) [ 19.866180] ACPI: PCI Interrupt Link [LUS0] (IRQs 5 7 9 10 *11 14 15) [ 19.866333] ACPI: PCI Interrupt Link [LUS2] (IRQs 5 *7 9 10 11 14 15) [ 19.866485] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 *10 11 14 15) [ 19.866637] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 19.866817] ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 19.866971] ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 19.867125] ACPI: PCI Interrupt Link [LPID] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 19.867286] ACPI: PCI Interrupt Link [LTID] (IRQs *5 7 9 10 11 14 15) [ 19.867439] ACPI: PCI Interrupt Link [LSI1] (IRQs 5 7 9 *10 11 14 15) [ 19.867563] Linux Plug and Play Support v0.97 (c) Adam Belay [ 19.867593] pnp: PnP ACPI init [ 19.867602] ACPI: bus type pnp registered [ 19.870090] pnp: PnP ACPI: found 13 devices [ 19.870095] ACPI: ACPI bus type pnp unregistered [ 19.870101] PnPBIOS: Disabled by ACPI PNP [ 19.870287] PCI: Using ACPI for IRQ routing [ 19.870292] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 19.890734] NET: Registered protocol family 8 [ 19.890738] NET: Registered protocol family 20 [ 19.890769] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 [ 19.890776] hpet0: 3 32-bit timers, 25000000 Hz [ 19.891821] AppArmor: AppArmor Filesystem Enabled [ 19.894693] Time: hpet clocksource has been installed. [ 19.893839] Clockevents: could not switch to one-shot mode:<6>Clockevents: could not switch to one-shot mode: lapic is not functional. [ 19.894707] Could not switch to high resolution mode on CPU 0 [ 19.893858] lapic is not functional. [ 19.893862] Could not switch to high resolution mode on CPU 1 [ 19.906719] system 00:00: iomem range 0xe0000000-0xefffffff could not be reserved [ 19.906733] system 00:01: iomem range 0xffc00000-0xffffffff could not be reserved [ 19.906740] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved [ 19.906746] system 00:01: iomem range 0xfee00000-0xfeefffff could not be reserved [ 19.906752] system 00:01: iomem range 0xfed00000-0xfed00fff has been reserved [ 19.906760] system 00:03: iomem range 0xe0000000-0xefffffff could not be reserved [ 19.906769] system 00:04: ioport range 0x1000-0x107f has been reserved [ 19.906774] system 00:04: ioport range 0x1080-0x10ff has been reserved [ 19.906779] system 00:04: ioport range 0x1400-0x147f has been reserved [ 19.906784] system 00:04: ioport range 0x1480-0x14ff has been reserved [ 19.906789] system 00:04: ioport range 0x1800-0x187f has been reserved [ 19.906794] system 00:04: ioport range 0x1880-0x18ff has been reserved [ 19.906799] system 00:04: ioport range 0x2000-0x203f has been reserved [ 19.906806] system 00:05: ioport range 0x360-0x361 has been reserved [ 19.906811] system 00:05: ioport range 0x380-0x383 has been reserved [ 19.906816] system 00:05: ioport range 0x4d0-0x4d1 has been reserved [ 19.937148] PCI: Bridge: 0000:00:02.0 [ 19.937153] IO window: 4000-4fff [ 19.937159] MEM window: c2000000-c3ffffff [ 19.937163] PREFETCH window: c8200000-c83fffff [ 19.937168] PCI: Bridge: 0000:00:03.0 [ 19.937171] IO window: disabled. [ 19.937176] MEM window: c4000000-c5ffffff [ 19.937180] PREFETCH window: disabled. [ 19.937186] PCI: Failed to allocate mem resource #6:20000@e0000000 for 0000:05:00.0 [ 19.937192] PCI: Bridge: 0000:00:04.0 [ 19.937195] IO window: disabled. [ 19.937200] MEM window: c6000000-c7ffffff [ 19.937204] PREFETCH window: d0000000-dfffffff [ 19.937209] PCI: Bridge: 0000:00:10.0 [ 19.937212] IO window: disabled. [ 19.937218] MEM window: c8000000-c80fffff [ 19.937222] PREFETCH window: disabled. [ 19.937237] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 19.937244] PCI: Setting latency timer of device 0000:00:03.0 to 64 [ 19.937251] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 19.937258] PCI: Setting latency timer of device 0000:00:10.0 to 64 [ 19.937270] NET: Registered protocol family 2 [ 19.986648] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 19.986913] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 19.987671] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 19.988054] TCP: Hash tables configured (established 131072 bind 65536) [ 19.988059] TCP reno registered [ 20.002693] checking if image is initramfs... it is [ 20.601881] Freeing initrd memory: 7441k freed [ 20.602017] Simple Boot Flag at 0x36 set to 0x1 [ 20.601756] audit: initializing netlink socket (disabled) [ 20.601775] audit(1205394831.300:1): initialized [ 20.601949] highmem bounce pool size: 64 pages [ 20.603630] VFS: Disk quotas dquot_6.5.1 [ 20.603696] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 20.603803] io scheduler noop registered [ 20.603807] io scheduler anticipatory registered [ 20.603811] io scheduler deadline registered [ 20.603822] io scheduler cfq registered (default) [ 20.820610] Boot video device is 0000:05:00.0 [ 20.820829] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 20.820850] assign_interrupt_mode Found MSI capability [ 20.820871] Allocate Port Service[0000:00:02.0:pcie00] [ 20.820931] PCI: Setting latency timer of device 0000:00:03.0 to 64 [ 20.820951] assign_interrupt_mode Found MSI capability [ 20.820968] Allocate Port Service[0000:00:03.0:pcie00] [ 20.821020] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 20.821041] assign_interrupt_mode Found MSI capability [ 20.821057] Allocate Port Service[0000:00:04.0:pcie00] [ 20.821253] isapnp: Scanning for PnP cards... [ 21.174208] isapnp: No Plug & Play device found [ 21.199807] Real Time Clock Driver v1.12ac [ 21.199991] hpet_resources: 0xfed00000 is busy [ 21.200038] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 21.201118] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 21.201186] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 21.201277] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 [ 21.218885] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 21.218901] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 21.232981] mice: PS/2 mouse device common for all mice [ 21.233106] EISA: Probing bus 0 at eisa.0 [ 21.233115] Cannot allocate resource for EISA slot 1 [ 21.233119] Cannot allocate resource for EISA slot 2 [ 21.233124] Cannot allocate resource for EISA slot 3 [ 21.233128] Cannot allocate resource for EISA slot 4 [ 21.233143] EISA: Detected 0 cards. [ 21.233148] cpuidle: using governor ladder [ 21.233152] cpuidle: using governor menu [ 21.233234] NET: Registered protocol family 1 [ 21.233265] Using IPI No-Shortcut mode [ 21.233295] registered taskstats version 1 [ 21.233423] Magic number: 0:38:875 [ 21.233598] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 21.233602] EDD information not available. [ 21.233817] Freeing unused kernel memory: 364k freed [ 21.267996] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 21.346856] vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 6144k, total 65536k [ 21.346868] vesafb: mode is 1024x768x32, linelength=4096, pages=1 [ 21.346874] vesafb: protected mode interface info at c000:d5d0 [ 21.346878] vesafb: pmi: set display start = c00cd606, set palette = c00cd670 [ 21.346883] vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da [ 21.346898] vesafb: scrolling: redraw [ 21.346903] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 21.347007] Console: switching to colour frame buffer device 128x48 [ 21.378036] fb0: VESA VGA frame buffer device [ 22.568622] ACPI: PCI Interrupt Link [LK1E] enabled at IRQ 11 [ 22.568627] PCI: setting IRQ 11 as level-triggered [ 22.568634] ACPI: PCI Interrupt 0000:05:00.0[A] -> Link [LK1E] -> GSI 11 (level, low) -> IRQ 11 [ 22.568642] PCI: Unable to reserve mem region #2:10000000@d0000000 for device 0000:05:00.0 [ 22.568645] nvidiafb: cannot request PCI regions [ 22.578877] fuse init (API version 7.9) [ 22.598823] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 22.598905] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 22.600626] ACPI: Thermal Zone [THRM] (65 C) [ 23.167513] ACPI: PCI Interrupt Link [LK4E] enabled at IRQ 10 [ 23.167519] PCI: setting IRQ 10 as level-triggered [ 23.167523] ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LK4E] -> GSI 10 (level, low) -> IRQ 10 [ 23.167533] PCI: Setting latency timer of device 0000:03:00.0 to 64 [ 23.201635] usbcore: registered new interface driver usbfs [ 23.201656] usbcore: registered new interface driver hub [ 23.201678] usbcore: registered new device driver usb [ 23.202557] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 23.207196] ssb: SPROM revision 2 detected. [ 23.225457] ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0 [ 23.225737] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 11 [ 23.225740] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LUS0] -> GSI 11 (level, low) -> IRQ 11 [ 23.225754] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 23.225758] ohci_hcd 0000:00:0b.0: OHCI Host Controller [ 23.226005] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1 [ 23.226022] ohci_hcd 0000:00:0b.0: irq 11, io mem 0xc0004000 [ 23.272897] SCSI subsystem initialized [ 23.285324] usb usb1: configuration #1 chosen from 1 choice [ 23.285348] hub 1-0:1.0: USB hub found [ 23.285357] hub 1-0:1.0: 8 ports detected [ 23.289782] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 23.289788] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 23.290011] libata version 3.00 loaded. [ 23.390534] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 7 [ 23.390540] PCI: setting IRQ 7 as level-triggered [ 23.390545] ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [LUS2] -> GSI 7 (level, low) -> IRQ 7 [ 23.390560] PCI: Setting latency timer of device 0000:00:0b.1 to 64 [ 23.390563] ehci_hcd 0000:00:0b.1: EHCI Host Controller [ 23.390598] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 2 [ 23.390634] ehci_hcd 0000:00:0b.1: debug port 1 [ 23.390639] PCI: cache line size of 64 is not supported by device 0000:00:0b.1 [ 23.390648] ehci_hcd 0000:00:0b.1: irq 7, io mem 0xc0005000 [ 23.402069] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 23.402175] usb usb2: configuration #1 chosen from 1 choice [ 23.402205] hub 2-0:1.0: USB hub found [ 23.402211] hub 2-0:1.0: 8 ports detected [ 23.505371] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 10 [ 23.505377] ACPI: PCI Interrupt 0000:07:05.0[A] -> Link [LNK1] -> GSI 10 (level, low) -> IRQ 10 [ 23.557045] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10] MMIO=[c8000000-c80007ff] Max Packet=[2048] IR/IT contexts=[4/4] [ 23.562098] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. [ 23.562367] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 10 [ 23.562370] ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [LMAC] -> GSI 10 (level, low) -> IRQ 10 [ 23.562377] PCI: Setting latency timer of device 0000:00:14.0 to 64 [ 24.081812] forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1b:24:36:a2:1b [ 24.081818] forcedeth 0000:00:14.0: highdma pwrctl timirq gbit lnktim desc-v3 [ 24.082154] sata_nv 0000:00:0e.0: version 3.5 [ 24.082174] PCI: Enabling device 0000:00:0e.0 (0005 -> 0007) [ 24.082421] ACPI: PCI Interrupt Link [LTID] enabled at IRQ 5 [ 24.082423] PCI: setting IRQ 5 as level-triggered [ 24.082428] ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [LTID] -> GSI 5 (level, low) -> IRQ 5 [ 24.082468] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 24.083421] scsi0 : sata_nv [ 24.083857] scsi1 : sata_nv [ 24.083978] ata1: SATA max UDMA/133 cmd 0x30c0 ctl 0x30b4 bmdma 0x3090 irq 5 [ 24.083982] ata2: SATA max UDMA/133 cmd 0x30b8 ctl 0x30b0 bmdma 0x3098 irq 5 [ 24.208086] usb 2-4: new high speed USB device using ehci_hcd and address 3 [ 24.349992] usb 2-4: configuration #1 chosen from 1 choice [ 24.551652] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 24.561902] ata1.00: ATA-7: WDC WD1600BEVS-60RST0, 04.01G04, max UDMA/100 [ 24.561905] ata1.00: 312581808 sectors, multi 16: LBA48 [ 24.567887] ata1.00: configured for UDMA/100 [ 24.652363] usb 1-3: new full speed USB device using ohci_hcd and address 2 [ 24.831359] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00241b0004561b00] [ 24.879195] ata2: SATA link down (SStatus 0 SControl 300) [ 24.883020] usb 1-3: configuration #1 chosen from 1 choice [ 24.890692] scsi 0:0:0:0: Direct-Access ATA WDC WD1600BEVS-6 04.0 PQ: 0 ANSI: 5 [ 24.893063] NFORCE-MCP51: IDE controller (0x10de:0x0265 rev 0xf1) at PCI slot 0000:00:0d.0 [ 24.893085] NFORCE-MCP51: not 100% native mode: will probe irqs later [ 24.893089] NFORCE-MCP51: BIOS didn't set cable bits correctly. Enabling workaround. [ 24.893094] NFORCE-MCP51: 0000:00:0d.0 (rev f1) UDMA133 controller [ 24.893100] ide0: BM-DMA at 0x3080-0x3087, BIOS settings: hda:DMA, hdb:pio [ 24.893107] NFORCE-MCP51: IDE port disabled [ 24.893110] Probing IDE interface ide0... [ 25.962765] hda: HL-DT-ST DVDRAM GSA-T10N, ATAPI CD/DVD-ROM drive [ 25.962792] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4 [ 25.963891] hda: MWDMA2 mode selected [ 25.964431] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 25.979751] Driver 'sd' needs updating - please use bus_type methods [ 25.979837] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 25.979848] sd 0:0:0:0: [sda] Write Protect is off [ 25.979850] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 25.979865] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 25.979908] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 25.979916] sd 0:0:0:0: [sda] Write Protect is off [ 25.979918] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 25.979930] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 25.979933] sda:<6>hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache [ 25.988763] Uniform CD-ROM driver Revision: 3.20 [ 26.027232] sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 > [ 26.106794] sd 0:0:0:0: [sda] Attached SCSI disk [ 26.112608] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 26.637990] Attempting manual resume [ 26.637994] swsusp: Resume From Partition 8:5 [ 26.637996] PM: Checking swsusp image. [ 26.638253] PM: Resume from disk failed. [ 26.650381] EXT3-fs: INFO: recovery required on readonly filesystem. [ 26.650386] EXT3-fs: write access will be enabled during recovery. [ 26.713321] kjournald starting. Commit interval 5 seconds [ 26.714206] EXT3-fs: recovery complete. [ 26.714735] EXT3-fs: mounted filesystem with ordered data mode. [ 36.656220] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x3040 [ 36.656236] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x3000 [ 36.748336] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 36.808342] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 36.865115] input: Power Button (FF) as /devices/virtual/input/input2 [ 36.888035] ACPI: Power Button (FF) [PWRF] [ 36.888137] input: Power Button (CM) as /devices/virtual/input/input3 [ 36.920767] ACPI: Power Button (CM) [PWRB] [ 36.920842] input: Sleep Button (CM) as /devices/virtual/input/input4 [ 36.952755] ACPI: Sleep Button (CM) [SLPB] [ 36.952832] input: Lid Switch as /devices/virtual/input/input5 [ 36.953588] ACPI: Lid Switch [LID] [ 36.996888] input: PC Speaker as /devices/platform/pcspkr/input/input6 [ 37.023647] ACPI: AC Adapter [ACAD] (on-line) [ 37.211766] ACPI: Battery Slot [BAT0] (battery absent) [ 37.346726] ACPI: WMI-Acer: Mapper loaded [ 37.778974] ricoh-mmc: Ricoh MMC Controller disabling driver [ 37.778979] ricoh-mmc: Copyright(c) Philip Langdale [ 37.779028] ricoh-mmc: Ricoh MMC controller found at 0000:07:05.2 [1180:0843] (rev 1) [ 37.779039] ricoh-mmc: Controller is now disabled. [ 37.854048] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:26/LNXVIDEO:01/input/input7 [ 37.866747] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 38.058572] sdhci: Secure Digital Host Controller Interface driver [ 38.058577] sdhci: Copyright(c) Pierre Ossman [ 38.058626] sdhci: SDHCI controller found at 0000:07:05.1 [1180:0822] (rev 19) [ 38.058877] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 11 [ 38.058880] ACPI: PCI Interrupt 0000:07:05.1[B] -> Link [LNK2] -> GSI 11 (level, low) -> IRQ 11 [ 38.058898] sdhci:slot0: Will use DMA mode even though HW doesn't fully claim to support it. [ 38.058937] mmc0: SDHCI at 0xc8000800 irq 11 DMA [ 38.312793] Linux agpgart interface v0.102 [ 38.550228] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 9 [ 38.550233] PCI: setting IRQ 9 as level-triggered [ 38.550237] ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LAZA] -> GSI 9 (level, low) -> IRQ 9 [ 38.550256] PCI: Setting latency timer of device 0000:00:10.1 to 64 [ 38.625069] Bluetooth: Core ver 2.11 [ 38.657766] NET: Registered protocol family 31 [ 38.657771] Bluetooth: HCI device and connection manager initialized [ 38.657775] Bluetooth: HCI socket layer initialized [ 38.721709] nvidia: module license 'NVIDIA' taints kernel. [ 38.976897] Bluetooth: HCI USB driver ver 2.9 [ 38.977912] PCI: Setting latency timer of device 0000:05:00.0 to 64 [ 38.978114] NVRM: loading NVIDIA UNIX x86 Kernel Module 169.12 Thu Feb 14 17:53:07 PST 2008 [ 38.978602] usbcore: registered new interface driver hci_usb [ 39.054481] Linux video capture interface: v2.00 [ 39.137388] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (0c45:62c0) [ 39.139642] usbcore: registered new interface driver uvcvideo [ 39.139648] USB Video Class driver (v0.1.0) [ 39.164449] b43-phy0: Broadcom 4311 WLAN found [ 39.229278] phy0: Selected rate control algorithm 'simple' [ 39.232170] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000 [ 39.301102] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8 [ 40.100464] udev: renamed network interface wmaster0 to eth1 [ 71.898038] lp: driver loaded but no devices found [ 72.222651] Adding 3903752k swap on /dev/sda5. Priority:-1 extents:1 across:3903752k [ 73.037447] EXT3 FS on sda8, internal journal [ 75.584352] kjournald starting. Commit interval 5 seconds [ 75.584648] EXT3 FS on sda7, internal journal [ 75.584652] EXT3-fs: mounted filesystem with ordered data mode. [ 75.758095] kjournald starting. Commit interval 5 seconds [ 75.758375] EXT3 FS on sda6, internal journal [ 75.758380] EXT3-fs: mounted filesystem with ordered data mode. [ 75.789561] kjournald starting. Commit interval 5 seconds [ 75.789816] EXT3 FS on sda9, internal journal [ 75.789818] EXT3-fs: mounted filesystem with ordered data mode. [ 76.802849] NET: Registered protocol family 15 [ 77.033118] padlock: VIA PadLock Hash Engine not detected. [ 77.141693] padlock: VIA PadLock Hash Engine not detected. [ 77.347609] padlock: VIA PadLock not detected. [ 78.118739] ip_tables: (C) 2000-2006 Netfilter Core Team [ 78.567123] padlock: VIA PadLock Hash Engine not detected. [ 78.635973] padlock: VIA PadLock Hash Engine not detected. [ 78.784527] padlock: VIA PadLock not detected. [ 78.939819] Initializing XFRM netlink socket [ 79.053048] NET: Registered protocol family 10 [ 79.053284] lo: Disabled Privacy Extensions [ 80.548593] RPC: Registered udp transport module. [ 80.548596] RPC: Registered tcp transport module. [ 81.702399] No dock devices found. [ 82.006650] powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-60 processors (2 cpu cores) (version 2.20.00) [ 82.007623] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x13 [ 82.007627] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x15 [ 82.007629] powernow-k8: 2 : fid 0x8 (1600 MHz), vid 0x17 [ 82.007632] powernow-k8: 3 : fid 0x0 (800 MHz), vid 0x1e [ 85.227853] input: b43-phy0 as /devices/virtual/input/input9 [ 86.650268] Registered led device: b43-phy0:tx [ 86.650817] Registered led device: b43-phy0:rx [ 86.651274] Registered led device: b43-phy0:radio [ 86.692553] ADDRCONF(NETDEV_UP): wlan0_rename: link is not ready [ 94.758070] ppdev: user-space parallel port driver [ 95.117524] audit(1205394906.818:2): operation="inode_permission" request_mask="a::" denied_mask="a::" name="/dev/tty" pid=6947 profile="/usr/sbin/cupsd" namespace="default" [ 95.225500] apm: BIOS not found. [ 97.061726] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 97.414534] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 97.435928] NFSD: starting 90-second grace period [ 102.186763] Clocksource tsc unstable (delta = -206363500 ns) [ 103.560012] Bluetooth: L2CAP ver 2.9 [ 103.560016] Bluetooth: L2CAP socket layer initialized [ 103.610675] Bluetooth: RFCOMM socket layer initialized [ 103.610690] Bluetooth: RFCOMM TTY layer initialized [ 103.610692] Bluetooth: RFCOMM ver 1.8 [ 106.511785] NET: Registered protocol family 17 [ 111.390966] eth0: no IPv6 routers present [ 118.382363] CPU0 attaching NULL sched-domain. [ 118.382372] CPU1 attaching NULL sched-domain. [ 118.399506] CPU0 attaching sched-domain: [ 118.399512] domain 0: span 03 [ 118.399516] groups: 01 02 [ 118.399519] CPU1 attaching sched-domain: [ 118.399521] domain 0: span 03 [ 118.399523] groups: 02 01 [ 143.318411] padlock: VIA PadLock not detected. [ 210.995887] NVRM: Xid (0005:00): 6, PE0000 1818 3effa09a 0000fba8 ff1c6014 000000ff [ 211.013825] NVRM: Xid (0005:00): 36, L1 -> L0