Oct 5 02:24:24 taoseeker wpa_supplicant[902]: wlan2: WPA: Group rekeying completed with 50:67:f0:d3:ed:c4 [GTK=CCMP] Oct 5 02:37:29 taoseeker NetworkManager[714]: nl_recvmsgs() error: (-33) Dump inconsistency detected, interrupted Oct 5 02:39:23 taoseeker wpa_supplicant[902]: wlan2: CTRL-EVENT-DISCONNECTED bssid=50:67:f0:d3:ed:c4 reason=4 Oct 5 02:39:23 taoseeker kernel: [11643.366006] ieee80211 phy0: wlan2: No probe response from AP 50:67:f0:d3:ed:c4 after 500ms, disconnecting. Oct 5 02:39:23 taoseeker kernel: [11643.370692] cfg80211: All devices are disconnected, going to restore regulatory settings Oct 5 02:39:23 taoseeker kernel: [11643.370708] cfg80211: Restoring regulatory settings Oct 5 02:39:23 taoseeker kernel: [11643.370723] cfg80211: Calling CRDA to update world regulatory domain Oct 5 02:39:23 taoseeker NetworkManager[714]: (wlan2): supplicant interface state: completed -> disconnected Oct 5 02:39:23 taoseeker NetworkManager[714]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 02:39:24 taoseeker wpa_supplicant[902]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 02:39:24 taoseeker kernel: [11644.623113] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 02:39:24 taoseeker NetworkManager[714]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 02:39:24 taoseeker kernel: [11644.634248] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 02:39:25 taoseeker kernel: [11644.837888] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 02:39:25 taoseeker kernel: [11645.041875] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 02:39:25 taoseeker kernel: [11645.245873] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 02:39:25 taoseeker NetworkManager[714]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 02:39:25 taoseeker NetworkManager[714]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 02:39:26 taoseeker wpa_supplicant[902]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 02:39:26 taoseeker kernel: [11646.503017] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 02:39:26 taoseeker NetworkManager[714]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 02:39:26 taoseeker kernel: [11646.514218] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 02:39:27 taoseeker kernel: [11646.717859] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 02:39:27 taoseeker kernel: [11646.921859] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 02:39:27 taoseeker kernel: [11647.125847] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 02:39:27 taoseeker NetworkManager[714]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 02:39:27 taoseeker NetworkManager[714]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 02:39:28 taoseeker wpa_supplicant[902]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 02:39:28 taoseeker kernel: [11648.382954] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 02:39:28 taoseeker NetworkManager[714]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 02:39:28 taoseeker kernel: [11648.394200] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 02:39:28 taoseeker kernel: [11648.597834] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 02:39:29 taoseeker kernel: [11648.801822] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 02:39:29 taoseeker NetworkManager[714]: (wlan2): roamed from BSSID 50:67:F0:D3:ED:C4 (Telenor6904ett) to (none) ((none)) Oct 5 02:39:29 taoseeker kernel: [11649.005830] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 02:39:29 taoseeker NetworkManager[714]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 02:39:29 taoseeker NetworkManager[714]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 02:39:30 taoseeker wpa_supplicant[902]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 02:39:30 taoseeker kernel: [11650.262996] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 02:39:30 taoseeker NetworkManager[714]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 02:39:30 taoseeker kernel: [11650.274158] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 02:39:30 taoseeker kernel: [11650.477809] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 02:39:31 taoseeker kernel: [11650.681799] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 02:39:31 taoseeker kernel: [11650.885804] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 02:39:31 taoseeker NetworkManager[714]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 02:39:31 taoseeker NetworkManager[714]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 02:39:32 taoseeker wpa_supplicant[902]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 02:39:32 taoseeker kernel: [11652.142944] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 02:39:32 taoseeker kernel: [11652.154156] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 02:39:32 taoseeker NetworkManager[714]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 02:39:32 taoseeker kernel: [11652.357787] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 02:39:32 taoseeker kernel: [11652.561787] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 02:39:33 taoseeker kernel: [11652.765776] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 02:39:33 taoseeker NetworkManager[714]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 02:39:33 taoseeker NetworkManager[714]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 02:39:39 taoseeker NetworkManager[714]: (wlan2): link timed out. Oct 5 02:39:39 taoseeker NetworkManager[714]: (wlan2): device state change: activated -> failed (reason 'supplicant-timeout') [100 120 11] Oct 5 02:39:39 taoseeker NetworkManager[714]: Activation (wlan2) failed for connection 'Telenor6904ett' Oct 5 02:39:39 taoseeker NetworkManager[714]: (wlan2): device state change: failed -> disconnected (reason 'none') [120 30 0] Oct 5 02:39:39 taoseeker NetworkManager[714]: (wlan2): deactivating device (reason 'none') [0] Oct 5 02:39:39 taoseeker NetworkManager[714]: (wlan2): canceled DHCP transaction, DHCP client pid 2853 Oct 5 02:39:39 taoseeker kernel: [11659.011089] IPv6: ADDRCONF(NETDEV_UP): wlan2: link is not ready Oct 5 02:39:39 taoseeker NetworkManager[714]: DNS: plugin dnsmasq update failed Oct 5 02:39:39 taoseeker NetworkManager[714]: ((null)): removing resolv.conf from /sbin/resolvconf Oct 5 02:39:39 taoseeker NetworkManager[714]: (wlan2): supplicant interface state: scanning -> disconnected Oct 5 02:39:42 taoseeker NetworkManager[714]: Auto-activating connection 'Telenor6904ett'. Oct 5 02:39:42 taoseeker NetworkManager[714]: Activation (wlan2) starting connection 'Telenor6904ett' Oct 5 02:39:42 taoseeker NetworkManager[714]: (wlan2): device state change: disconnected -> prepare (reason 'none') [30 40 0] Oct 5 02:39:42 taoseeker NetworkManager[714]: Activation (wlan2) Stage 1 of 5 (Device Prepare) scheduled... Oct 5 02:39:42 taoseeker NetworkManager[714]: Activation (wlan2) Stage 1 of 5 (Device Prepare) started... Oct 5 02:39:42 taoseeker NetworkManager[714]: Activation (wlan2) Stage 2 of 5 (Device Configure) scheduled... Oct 5 02:39:42 taoseeker NetworkManager[714]: Activation (wlan2) Stage 1 of 5 (Device Prepare) complete. Oct 5 02:39:42 taoseeker NetworkManager[714]: Activation (wlan2) Stage 2 of 5 (Device Configure) starting... Oct 5 02:39:42 taoseeker NetworkManager[714]: (wlan2): device state change: prepare -> config (reason 'none') [40 50 0] Oct 5 02:39:42 taoseeker NetworkManager[714]: Activation (wlan2/wireless): access point 'Telenor6904ett' has security, but secrets are required. Oct 5 02:39:42 taoseeker NetworkManager[714]: (wlan2): device state change: config -> need-auth (reason 'none') [50 60 0] Oct 5 02:39:42 taoseeker NetworkManager[714]: Activation (wlan2) Stage 2 of 5 (Device Configure) complete. Oct 5 02:39:42 taoseeker NetworkManager[714]: Activation (wlan2) Stage 1 of 5 (Device Prepare) scheduled... Oct 5 02:39:42 taoseeker NetworkManager[714]: Activation (wlan2) Stage 1 of 5 (Device Prepare) started... Oct 5 02:39:42 taoseeker NetworkManager[714]: (wlan2): device state change: need-auth -> prepare (reason 'none') [60 40 0] Oct 5 02:39:42 taoseeker NetworkManager[714]: Activation (wlan2) Stage 2 of 5 (Device Configure) scheduled... Oct 5 02:39:42 taoseeker NetworkManager[714]: Activation (wlan2) Stage 1 of 5 (Device Prepare) complete. Oct 5 02:39:42 taoseeker NetworkManager[714]: Activation (wlan2) Stage 2 of 5 (Device Configure) starting... Oct 5 02:39:42 taoseeker NetworkManager[714]: (wlan2): device state change: prepare -> config (reason 'none') [40 50 0] Oct 5 02:39:42 taoseeker NetworkManager[714]: Activation (wlan2/wireless): connection 'Telenor6904ett' has security, and secrets exist. No new secrets needed. Oct 5 02:39:42 taoseeker NetworkManager[714]: Config: added 'ssid' value 'Telenor6904ett' Oct 5 02:39:42 taoseeker NetworkManager[714]: Config: added 'scan_ssid' value '1' Oct 5 02:39:42 taoseeker NetworkManager[714]: Config: added 'key_mgmt' value 'WPA-PSK' Oct 5 02:39:42 taoseeker NetworkManager[714]: Config: added 'auth_alg' value 'OPEN' Oct 5 02:39:42 taoseeker NetworkManager[714]: Config: added 'psk' value '' Oct 5 02:39:42 taoseeker NetworkManager[714]: Activation (wlan2) Stage 2 of 5 (Device Configure) complete. Oct 5 02:39:42 taoseeker NetworkManager[714]: Config: set interface ap_scan to 1 Oct 5 02:39:42 taoseeker NetworkManager[714]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 02:39:43 taoseeker wpa_supplicant[902]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 02:39:43 taoseeker kernel: [11663.126831] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 02:39:43 taoseeker NetworkManager[714]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 02:39:43 taoseeker kernel: [11663.138024] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 02:39:43 taoseeker wpa_supplicant[902]: wlan2: Trying to associate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 02:39:43 taoseeker kernel: [11663.341650] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 02:39:43 taoseeker kernel: [11663.343118] wlan2: authenticated Oct 5 02:39:43 taoseeker kernel: [11663.343735] wlan2: associating with AP with corrupt beacon Oct 5 02:39:43 taoseeker kernel: [11663.345691] wlan2: associate with 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 02:39:43 taoseeker kernel: [11663.348189] wlan2: RX AssocResp from 50:67:f0:d3:ed:c4 (capab=0xc11 status=0 aid=1) Oct 5 02:39:43 taoseeker kernel: [11663.348708] wlan2: associated Oct 5 02:39:43 taoseeker kernel: [11663.349261] IPv6: ADDRCONF(NETDEV_CHANGE): wlan2: link becomes ready Oct 5 02:39:43 taoseeker kernel: [11663.349451] cfg80211: Pending regulatory request, waiting for it to be processed... Oct 5 02:39:43 taoseeker wpa_supplicant[902]: wlan2: Associated with 50:67:f0:d3:ed:c4 Oct 5 02:39:43 taoseeker NetworkManager[714]: (wlan2): supplicant interface state: authenticating -> associating Oct 5 02:39:43 taoseeker NetworkManager[714]: (wlan2): supplicant interface state: associating -> associated Oct 5 02:39:44 taoseeker NetworkManager[714]: (wlan2): supplicant interface state: associated -> 4-way handshake Oct 5 02:39:44 taoseeker wpa_supplicant[902]: wlan2: WPA: Key negotiation completed with 50:67:f0:d3:ed:c4 [PTK=CCMP GTK=CCMP] Oct 5 02:39:44 taoseeker wpa_supplicant[902]: wlan2: CTRL-EVENT-CONNECTED - Connection to 50:67:f0:d3:ed:c4 completed (reauth) [id=0 id_str=] Oct 5 02:39:44 taoseeker NetworkManager[714]: (wlan2): supplicant interface state: 4-way handshake -> completed Oct 5 02:39:44 taoseeker NetworkManager[714]: Activation (wlan2/wireless) Stage 2 of 5 (Device Configure) successful. Connected to wireless network 'Telenor6904ett'. Oct 5 02:39:44 taoseeker NetworkManager[714]: Activation (wlan2) Stage 3 of 5 (IP Configure Start) scheduled. Oct 5 02:39:44 taoseeker NetworkManager[714]: Activation (wlan2) Stage 3 of 5 (IP Configure Start) started... Oct 5 02:39:44 taoseeker NetworkManager[714]: (wlan2): device state change: config -> ip-config (reason 'none') [50 70 0] Oct 5 02:39:44 taoseeker NetworkManager[714]: Activation (wlan2) Beginning DHCPv4 transaction (timeout in 45 seconds) Oct 5 02:39:44 taoseeker NetworkManager[714]: dhclient started with pid 3623 Oct 5 02:39:44 taoseeker NetworkManager[714]: Activation (wlan2) Beginning IP6 addrconf. Oct 5 02:39:44 taoseeker NetworkManager[714]: Activation (wlan2) Stage 3 of 5 (IP Configure Start) complete. Oct 5 02:39:44 taoseeker dhclient: Internet Systems Consortium DHCP Client 4.2.4 Oct 5 02:39:44 taoseeker dhclient: Copyright 2004-2012 Internet Systems Consortium. Oct 5 02:39:44 taoseeker dhclient: All rights reserved. Oct 5 02:39:44 taoseeker dhclient: For info, please visit https://www.isc.org/software/dhcp/ Oct 5 02:39:44 taoseeker dhclient: Oct 5 02:39:44 taoseeker dhclient: Listening on LPF/wlan2/00:14:51:81:6a:17 Oct 5 02:39:44 taoseeker dhclient: Sending on LPF/wlan2/00:14:51:81:6a:17 Oct 5 02:39:44 taoseeker dhclient: Sending on Socket/fallback Oct 5 02:39:44 taoseeker dhclient: DHCPREQUEST of 10.0.0.66 on wlan2 to 255.255.255.255 port 67 Oct 5 02:39:44 taoseeker NetworkManager[714]: (wlan2): DHCPv4 state changed nbi -> preinit Oct 5 02:39:44 taoseeker dhclient: DHCPACK of 10.0.0.66 from 10.0.0.138 Oct 5 02:39:44 taoseeker dhclient: bound to 10.0.0.66 -- renewal in 36137 seconds. Oct 5 02:39:44 taoseeker NetworkManager[714]: (wlan2): DHCPv4 state changed preinit -> reboot Oct 5 02:39:44 taoseeker NetworkManager[714]: address 10.0.0.66 Oct 5 02:39:44 taoseeker NetworkManager[714]: prefix 24 (255.255.255.0) Oct 5 02:39:44 taoseeker NetworkManager[714]: gateway 10.0.0.138 Oct 5 02:39:44 taoseeker NetworkManager[714]: hostname 'taoseeker' Oct 5 02:39:44 taoseeker NetworkManager[714]: nameserver '130.67.15.198' Oct 5 02:39:44 taoseeker NetworkManager[714]: nameserver '193.213.112.4' Oct 5 02:39:44 taoseeker NetworkManager[714]: nameserver '10.0.0.138' Oct 5 02:39:44 taoseeker NetworkManager[714]: domain name 'lan' Oct 5 02:39:44 taoseeker NetworkManager[714]: Activation (wlan2) Stage 5 of 5 (IPv4 Configure Commit) scheduled... Oct 5 02:39:44 taoseeker NetworkManager[714]: Activation (wlan2) Stage 5 of 5 (IPv4 Commit) started... Oct 5 02:39:45 taoseeker NetworkManager[714]: (wlan2): device state change: ip-config -> activated (reason 'none') [70 100 0] Oct 5 02:39:45 taoseeker NetworkManager[714]: ((null)): writing resolv.conf to /sbin/resolvconf Oct 5 02:39:46 taoseeker NetworkManager[714]: Policy set 'Telenor6904ett' (wlan2) as default for IPv4 routing and DNS. Oct 5 02:39:46 taoseeker NetworkManager[714]: Activation (wlan2) successful, device activated. Oct 5 02:39:46 taoseeker NetworkManager[714]: Activation (wlan2) Stage 5 of 5 (IPv4 Commit) complete. Oct 5 02:40:04 taoseeker NetworkManager[714]: (wlan2): IP6 addrconf timed out or failed. Oct 5 02:40:04 taoseeker NetworkManager[714]: Activation (wlan2) Stage 4 of 5 (IPv6 Configure Timeout) scheduled... Oct 5 02:40:04 taoseeker NetworkManager[714]: Activation (wlan2) Stage 4 of 5 (IPv6 Configure Timeout) started... Oct 5 02:40:04 taoseeker NetworkManager[714]: Activation (wlan2) Stage 4 of 5 (IPv6 Configure Timeout) complete. Oct 5 02:40:53 taoseeker NetworkManager[714]: nl_recvmsgs() error: (-33) Dump inconsistency detected, interrupted Oct 5 02:41:17 taoseeker NetworkManager[714]: nl_recvmsgs() error: (-33) Dump inconsistency detected, interrupted Oct 5 02:42:05 taoseeker NetworkManager[714]: nl_recvmsgs() error: (-33) Dump inconsistency detected, interrupted Oct 5 02:45:17 taoseeker NetworkManager[714]: nl_recvmsgs() error: (-33) Dump inconsistency detected, interrupted Oct 5 02:46:29 NetworkManager[714]: last message repeated 2 times Oct 5 02:47:29 taoseeker NetworkManager[714]: nl_recvmsgs() error: (-33) Dump inconsistency detected, interrupted Oct 5 02:50:05 taoseeker NetworkManager[714]: nl_recvmsgs() error: (-33) Dump inconsistency detected, interrupted Oct 5 02:50:53 taoseeker NetworkManager[714]: nl_recvmsgs() error: (-33) Dump inconsistency detected, interrupted Oct 5 02:54:25 taoseeker wpa_supplicant[902]: wlan2: WPA: Group rekeying completed with 50:67:f0:d3:ed:c4 [GTK=CCMP] Oct 5 02:56:05 taoseeker NetworkManager[714]: nl_recvmsgs() error: (-33) Dump inconsistency detected, interrupted Oct 5 02:57:29 NetworkManager[714]: last message repeated 2 times Oct 5 02:59:29 taoseeker NetworkManager[714]: nl_recvmsgs() error: (-33) Dump inconsistency detected, interrupted Oct 5 03:00:41 taoseeker NetworkManager[714]: nl_recvmsgs() error: (-33) Dump inconsistency detected, interrupted Oct 5 03:01:05 taoseeker NetworkManager[714]: nl_recvmsgs() error: (-33) Dump inconsistency detected, interrupted Oct 5 03:02:41 taoseeker NetworkManager[714]: nl_recvmsgs() error: (-33) Dump inconsistency detected, interrupted Oct 5 03:02:53 taoseeker NetworkManager[714]: nl_recvmsgs() error: (-33) Dump inconsistency detected, interrupted Oct 5 03:08:29 taoseeker NetworkManager[714]: nl_recvmsgs() error: (-33) Dump inconsistency detected, interrupted Oct 5 03:12:05 taoseeker NetworkManager[714]: nl_recvmsgs() error: (-33) Dump inconsistency detected, interrupted Oct 5 03:12:53 taoseeker NetworkManager[714]: nl_recvmsgs() error: (-33) Dump inconsistency detected, interrupted Oct 5 03:14:53 taoseeker NetworkManager[714]: nl_recvmsgs() error: (-33) Dump inconsistency detected, interrupted Oct 5 03:18:41 taoseeker NetworkManager[714]: nl_recvmsgs() error: (-33) Dump inconsistency detected, interrupted Oct 5 03:23:46 taoseeker NetworkManager[714]: kernel firmware directory '/lib/firmware' changed Oct 5 03:24:26 taoseeker wpa_supplicant[902]: wlan2: WPA: Group rekeying completed with 50:67:f0:d3:ed:c4 [GTK=CCMP] Oct 5 03:24:53 taoseeker modem-manager[698]: Caught signal 15, shutting down... Oct 5 03:24:53 taoseeker NetworkManager[714]: the modem manager disappeared Oct 5 03:24:53 taoseeker NetworkManager[714]: trying to start the modem manager... Oct 5 03:24:53 taoseeker modem-manager[6345]: ModemManager (version 0.5.999) starting... Oct 5 03:24:53 taoseeker NetworkManager[714]: modem-manager is now available Oct 5 03:24:53 taoseeker modem-manager[6345]: Loaded plugin 'Wavecom' Oct 5 03:24:53 taoseeker modem-manager[6345]: Loaded plugin 'Ericsson MBM' Oct 5 03:24:53 taoseeker modem-manager[6345]: Loaded plugin 'SimTech' Oct 5 03:24:53 taoseeker modem-manager[6345]: Loaded plugin 'Novatel' Oct 5 03:24:53 taoseeker modem-manager[6345]: Loaded plugin 'Nokia' Oct 5 03:24:53 taoseeker modem-manager[6345]: Loaded plugin 'AnyData' Oct 5 03:24:53 taoseeker modem-manager[6345]: Loaded plugin 'MotoC' Oct 5 03:24:53 taoseeker modem-manager[6345]: Loaded plugin 'Option High-Speed' Oct 5 03:24:53 taoseeker modem-manager[6345]: Loaded plugin 'X22X' Oct 5 03:24:53 taoseeker modem-manager[6345]: Loaded plugin 'Linktop' Oct 5 03:24:53 taoseeker modem-manager[6345]: Loaded plugin 'Longcheer' Oct 5 03:24:53 taoseeker modem-manager[6345]: Loaded plugin 'Sierra' Oct 5 03:24:53 taoseeker modem-manager[6345]: Loaded plugin 'Option' Oct 5 03:24:53 taoseeker modem-manager[6345]: Loaded plugin 'Gobi' Oct 5 03:24:53 taoseeker modem-manager[6345]: Loaded plugin 'Samsung' Oct 5 03:24:53 taoseeker modem-manager[6345]: Loaded plugin 'Huawei' Oct 5 03:24:53 taoseeker modem-manager[6345]: Loaded plugin 'ZTE' Oct 5 03:24:53 taoseeker modem-manager[6345]: Loaded plugin 'Cinterion' Oct 5 03:24:53 taoseeker modem-manager[6345]: Loaded plugin 'Iridium' Oct 5 03:24:53 taoseeker modem-manager[6345]: Loaded plugin 'Generic' Oct 5 03:24:53 taoseeker modem-manager[6345]: Successfully loaded 20 plugins Oct 5 03:24:53 taoseeker modem-manager[6345]: (ttyPZ1) opening serial port... Oct 5 03:24:53 taoseeker modem-manager[6345]: (ttyPZ1): port attributes not fully set Oct 5 03:24:53 taoseeker modem-manager[6345]: (ttyPZ0) opening serial port... Oct 5 03:24:53 taoseeker modem-manager[6345]: (ttyPZ0): port attributes not fully set Oct 5 03:25:05 taoseeker NetworkManager[714]: nl_recvmsgs() error: (-33) Dump inconsistency detected, interrupted Oct 5 03:25:06 taoseeker modem-manager[6345]: (ttyPZ1) closing serial port... Oct 5 03:25:06 taoseeker modem-manager[6345]: (ttyPZ1) serial port closed Oct 5 03:25:06 taoseeker modem-manager[6345]: (ttyPZ1) opening serial port... Oct 5 03:25:06 taoseeker modem-manager[6345]: (ttyPZ0) closing serial port... Oct 5 03:25:06 taoseeker modem-manager[6345]: (ttyPZ0) serial port closed Oct 5 03:25:06 taoseeker modem-manager[6345]: (ttyPZ0) opening serial port... Oct 5 03:25:12 taoseeker modem-manager[6345]: (ttyPZ1) closing serial port... Oct 5 03:25:12 taoseeker modem-manager[6345]: (ttyPZ1) serial port closed Oct 5 03:25:12 taoseeker modem-manager[6345]: (ttyPZ0) closing serial port... Oct 5 03:25:12 taoseeker modem-manager[6345]: (ttyPZ0) serial port closed Oct 5 03:25:12 taoseeker modem-manager[6345]: (ttyPZ1) opening serial port... Oct 5 03:25:12 taoseeker modem-manager[6345]: (ttyPZ1): port attributes not fully set Oct 5 03:25:12 taoseeker modem-manager[6345]: (ttyPZ0) opening serial port... Oct 5 03:25:12 taoseeker modem-manager[6345]: (ttyPZ0): port attributes not fully set Oct 5 03:25:24 taoseeker modem-manager[6345]: (ttyPZ1) closing serial port... Oct 5 03:25:24 taoseeker modem-manager[6345]: (ttyPZ1) serial port closed Oct 5 03:25:24 taoseeker modem-manager[6345]: (ttyPZ1) opening serial port... Oct 5 03:25:24 taoseeker modem-manager[6345]: (ttyPZ0) closing serial port... Oct 5 03:25:24 taoseeker modem-manager[6345]: (ttyPZ0) serial port closed Oct 5 03:25:24 taoseeker modem-manager[6345]: (ttyPZ0) opening serial port... Oct 5 03:25:30 taoseeker modem-manager[6345]: (ttyPZ1) closing serial port... Oct 5 03:25:30 taoseeker modem-manager[6345]: (ttyPZ1) serial port closed Oct 5 03:25:30 taoseeker modem-manager[6345]: (ttyPZ0) closing serial port... Oct 5 03:25:30 taoseeker modem-manager[6345]: (ttyPZ0) serial port closed Oct 5 03:26:19 taoseeker modem-manager[12631]: ModemManager (version 0.5.999) starting... Oct 5 03:26:19 taoseeker modem-manager[12631]: Could not acquire the org.freedesktop.ModemManager service as it is already taken. Return: 3 Oct 5 03:26:19 taoseeker modem-manager[12634]: ModemManager (version 0.5.999) starting... Oct 5 03:26:19 taoseeker modem-manager[12634]: Could not acquire the org.freedesktop.ModemManager service as it is already taken. Return: 3 Oct 5 03:26:19 taoseeker modem-manager[12636]: ModemManager (version 0.5.999) starting... Oct 5 03:26:19 taoseeker modem-manager[12636]: Could not acquire the org.freedesktop.ModemManager service as it is already taken. Return: 3 Oct 5 03:26:19 taoseeker modem-manager[12638]: ModemManager (version 0.5.999) starting... Oct 5 03:26:19 taoseeker modem-manager[12638]: Could not acquire the org.freedesktop.ModemManager service as it is already taken. Return: 3 Oct 5 03:26:19 taoseeker modem-manager[12640]: ModemManager (version 0.5.999) starting... Oct 5 03:26:19 taoseeker modem-manager[12640]: Could not acquire the org.freedesktop.ModemManager service as it is already taken. Return: 3 Oct 5 03:26:19 taoseeker modem-manager[12642]: ModemManager (version 0.5.999) starting... Oct 5 03:26:19 taoseeker modem-manager[12642]: Could not acquire the org.freedesktop.ModemManager service as it is already taken. Return: 3 Oct 5 03:26:19 taoseeker modem-manager[12644]: ModemManager (version 0.5.999) starting... Oct 5 03:26:19 taoseeker modem-manager[12644]: Could not acquire the org.freedesktop.ModemManager service as it is already taken. Return: 3 Oct 5 03:26:19 taoseeker modem-manager[12646]: ModemManager (version 0.5.999) starting... Oct 5 03:26:19 taoseeker modem-manager[12646]: Could not acquire the org.freedesktop.ModemManager service as it is already taken. Return: 3 Oct 5 03:26:19 taoseeker modem-manager[12648]: ModemManager (version 0.5.999) starting... Oct 5 03:26:19 taoseeker modem-manager[12648]: Could not acquire the org.freedesktop.ModemManager service as it is already taken. Return: 3 Oct 5 03:26:19 taoseeker modem-manager[12650]: ModemManager (version 0.5.999) starting... Oct 5 03:26:19 taoseeker modem-manager[12650]: Could not acquire the org.freedesktop.ModemManager service as it is already taken. Return: 3 Oct 5 03:26:19 taoseeker modem-manager[12652]: ModemManager (version 0.5.999) starting... Oct 5 03:26:19 taoseeker modem-manager[12652]: Could not acquire the org.freedesktop.ModemManager service as it is already taken. Return: 3 Oct 5 03:26:53 taoseeker NetworkManager[714]: nl_recvmsgs() error: (-33) Dump inconsistency detected, interrupted Oct 5 03:28:05 taoseeker NetworkManager[714]: nl_recvmsgs() error: (-33) Dump inconsistency detected, interrupted Oct 5 03:28:19 taoseeker kernel: Kernel logging (proc) stopped. Oct 5 03:29:26 taoseeker kernel: imklog 5.8.6, log source = /proc/kmsg started. Oct 5 03:29:26 taoseeker kernel: [ 0.000000] Using PowerMac machine description Oct 5 03:29:26 taoseeker kernel: [ 0.000000] Total memory = 1536MB; using 4096kB for hash table (at cfc00000) Oct 5 03:29:26 taoseeker kernel: [ 0.000000] Initializing cgroup subsys cpuset Oct 5 03:29:26 taoseeker kernel: [ 0.000000] Initializing cgroup subsys cpu Oct 5 03:29:26 taoseeker kernel: [ 0.000000] Linux version 3.5.0-17-powerpc-smp (buildd@adare) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #26-Ubuntu SMP Wed Oct 3 21:29:20 UTC 2012 (Ubuntu 3.5.0-17.26-powerpc-smp 3.5.5) Oct 5 03:29:26 taoseeker kernel: [ 0.000000] Found initrd at 0xc1800000:0xc2720000 Oct 5 03:29:26 taoseeker kernel: [ 0.000000] Found UniNorth memory controller & host bridge @ 0xf8000000 revision: 0xd2 Oct 5 03:29:26 taoseeker kernel: [ 0.000000] Mapped at 0xff7c0000 Oct 5 03:29:26 taoseeker kernel: [ 0.000000] Found a Intrepid mac-io controller, rev: 0, mapped at 0xff740000 Oct 5 03:29:26 taoseeker kernel: [ 0.000000] Processor NAP mode on idle enabled. Oct 5 03:29:26 taoseeker kernel: [ 0.000000] PowerMac motherboard: iBook G4 Oct 5 03:29:26 taoseeker kernel: [ 0.000000] via-pmu: Server Mode is disabled Oct 5 03:29:26 taoseeker kernel: [ 0.000000] PMU driver v2 initialized for Core99, firmware: 0c Oct 5 03:29:26 taoseeker kernel: [ 0.000000] CPU maps initialized for 1 thread per core Oct 5 03:29:26 taoseeker kernel: [ 0.000000] (thread shift is 0) Oct 5 03:29:26 taoseeker kernel: [ 0.000000] bootconsole [udbg0] enabled Oct 5 03:29:26 taoseeker kernel: [ 0.000000] Found UniNorth PCI host bridge at 0x00000000f0000000. Firmware bus number: 0->0 Oct 5 03:29:26 taoseeker kernel: [ 0.000000] PCI host bridge /pci@f0000000 ranges: Oct 5 03:29:26 taoseeker kernel: [ 0.000000] MEM 0x00000000f1000000..0x00000000f1ffffff -> 0x00000000f1000000 Oct 5 03:29:26 taoseeker kernel: [ 0.000000] IO 0x00000000f0000000..0x00000000f07fffff -> 0x0000000000000000 Oct 5 03:29:26 taoseeker kernel: [ 0.000000] MEM 0x0000000090000000..0x000000009fffffff -> 0x0000000090000000 Oct 5 03:29:26 taoseeker kernel: [ 0.000000] Found UniNorth PCI host bridge at 0x00000000f2000000. Firmware bus number: 0->0 Oct 5 03:29:26 taoseeker kernel: [ 0.000000] PCI host bridge /pci@f2000000 (primary) ranges: Oct 5 03:29:26 taoseeker kernel: [ 0.000000] MEM 0x00000000f3000000..0x00000000f3ffffff -> 0x00000000f3000000 Oct 5 03:29:26 taoseeker kernel: [ 0.000000] IO 0x00000000f2000000..0x00000000f27fffff -> 0x0000000000000000 Oct 5 03:29:26 taoseeker kernel: [ 0.000000] MEM 0x0000000080000000..0x000000008fffffff -> 0x0000000080000000 Oct 5 03:29:26 taoseeker kernel: [ 0.000000] Found UniNorth PCI host bridge at 0x00000000f4000000. Firmware bus number: 0->0 Oct 5 03:29:26 taoseeker kernel: [ 0.000000] PCI host bridge /pci@f4000000 ranges: Oct 5 03:29:26 taoseeker kernel: [ 0.000000] MEM 0x00000000f5000000..0x00000000f5ffffff -> 0x00000000f5000000 Oct 5 03:29:26 taoseeker kernel: [ 0.000000] IO 0x00000000f4000000..0x00000000f47fffff -> 0x0000000000000000 Oct 5 03:29:26 taoseeker kernel: [ 0.000000] nvram: Checking bank 0... Oct 5 03:29:26 taoseeker kernel: [ 0.000000] nvram: gen0=968, gen1=969 Oct 5 03:29:26 taoseeker kernel: [ 0.000000] nvram: Active bank is: 1 Oct 5 03:29:26 taoseeker kernel: [ 0.000000] nvram: OF partition at 0x410 Oct 5 03:29:26 taoseeker kernel: [ 0.000000] nvram: XP partition at 0x1020 Oct 5 03:29:26 taoseeker kernel: [ 0.000000] nvram: NR partition at 0x1120 Oct 5 03:29:26 taoseeker kernel: [ 0.000000] Top of RAM: 0x60000000, Total RAM: 0x60000000 Oct 5 03:29:26 taoseeker kernel: [ 0.000000] Memory hole size: 0MB Oct 5 03:29:26 taoseeker kernel: [ 0.000000] Zone ranges: Oct 5 03:29:26 taoseeker kernel: [ 0.000000] DMA [mem 0x00000000-0x2fffffff] Oct 5 03:29:26 taoseeker kernel: [ 0.000000] Normal empty Oct 5 03:29:26 taoseeker kernel: [ 0.000000] HighMem [mem 0x30000000-0x5fffffff] Oct 5 03:29:26 taoseeker kernel: [ 0.000000] Movable zone start for each node Oct 5 03:29:26 taoseeker kernel: [ 0.000000] Early memory node ranges Oct 5 03:29:26 taoseeker kernel: [ 0.000000] node 0: [mem 0x00000000-0x5fffffff] Oct 5 03:29:26 taoseeker kernel: [ 0.000000] On node 0 totalpages: 393216 Oct 5 03:29:26 taoseeker kernel: [ 0.000000] free_area_init_node: node 0, pgdat c091c220, node_mem_map c0abf000 Oct 5 03:29:26 taoseeker kernel: [ 0.000000] DMA zone: 1536 pages used for memmap Oct 5 03:29:26 taoseeker kernel: [ 0.000000] DMA zone: 0 pages reserved Oct 5 03:29:26 taoseeker kernel: [ 0.000000] DMA zone: 195072 pages, LIFO batch:31 Oct 5 03:29:26 taoseeker kernel: [ 0.000000] HighMem zone: 1536 pages used for memmap Oct 5 03:29:26 taoseeker kernel: [ 0.000000] HighMem zone: 195072 pages, LIFO batch:31 Oct 5 03:29:26 taoseeker kernel: [ 0.000000] PERCPU: Embedded 9 pages/cpu @c16c8000 s12832 r8192 d15840 u36864 Oct 5 03:29:26 taoseeker kernel: [ 0.000000] pcpu-alloc: s12832 r8192 d15840 u36864 alloc=9*4096 Oct 5 03:29:26 taoseeker kernel: [ 0.000000] pcpu-alloc: [0] 0 Oct 5 03:29:26 taoseeker kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 390144 Oct 5 03:29:26 taoseeker kernel: [ 0.000000] Kernel command line: root=UUID=2637ecb6-e215-4cbb-991f-e19d18210b06 ro quiet splash video=radeonfb:1024x768-32@60 Oct 5 03:29:26 taoseeker kernel: [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) Oct 5 03:29:26 taoseeker kernel: [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Oct 5 03:29:26 taoseeker kernel: [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Oct 5 03:29:26 taoseeker kernel: [ 0.000000] allocated 3145728 bytes of page_cgroup Oct 5 03:29:26 taoseeker kernel: [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups Oct 5 03:29:26 taoseeker kernel: [ 0.000000] High memory: 786432k Oct 5 03:29:26 taoseeker kernel: [ 0.000000] Memory: 1525688k/1572864k available (9032k kernel code, 47176k reserved, 396k data, 1521k bss, 384k init) Oct 5 03:29:26 taoseeker kernel: [ 0.000000] Kernel virtual memory layout: Oct 5 03:29:26 taoseeker kernel: [ 0.000000] * 0xfff9f000..0xfffff000 : fixmap Oct 5 03:29:26 taoseeker kernel: [ 0.000000] * 0xff800000..0xffc00000 : highmem PTEs Oct 5 03:29:26 taoseeker kernel: [ 0.000000] * 0xfdf32000..0xff800000 : early ioremap Oct 5 03:29:26 taoseeker kernel: [ 0.000000] * 0xf1000000..0xfdf32000 : vmalloc & ioremap Oct 5 03:29:26 taoseeker kernel: [ 0.000000] SLUB: Genslabs=15, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Oct 5 03:29:26 taoseeker kernel: [ 0.000000] Hierarchical RCU implementation. Oct 5 03:29:26 taoseeker kernel: [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. Oct 5 03:29:26 taoseeker kernel: [ 0.000000] NR_IRQS:512 nr_irqs:512 16 Oct 5 03:29:26 taoseeker kernel: [ 0.000000] mpic: Resetting Oct 5 03:29:26 taoseeker kernel: [ 0.000000] mpic: Setting up MPIC " MPIC 1 " version 1.2 at 80040000, max 1 CPUs Oct 5 03:29:26 taoseeker kernel: [ 0.000000] mpic: ISU size: 64, shift: 6, mask: 3f Oct 5 03:29:26 taoseeker kernel: [ 0.000000] mpic: Initializing for 64 sources Oct 5 03:29:26 taoseeker kernel: [ 0.000000] GMT Delta read from XPRAM: 0 minutes, DST: off Oct 5 03:29:26 taoseeker kernel: [ 0.000000] time_init: decrementer frequency = 18.432000 MHz Oct 5 03:29:26 taoseeker kernel: [ 0.000000] time_init: processor frequency = 1420.000000 MHz Oct 5 03:29:26 taoseeker kernel: [ 0.000000] clocksource: timebase mult[3640e38e] shift[24] registered Oct 5 03:29:26 taoseeker kernel: [ 0.000000] clockevent: decrementer mult[4b7f5a5] shift[32] cpu[0] Oct 5 03:29:26 taoseeker kernel: [ 0.000000] Console: colour dummy device 80x25 Oct 5 03:29:26 taoseeker kernel: [ 0.000000] console [tty0] enabled, bootconsole disabled Oct 5 03:29:26 taoseeker kernel: [ 0.000436] pid_max: default: 32768 minimum: 301 Oct 5 03:29:26 taoseeker kernel: [ 0.000550] Security Framework initialized Oct 5 03:29:26 taoseeker kernel: [ 0.000648] AppArmor: AppArmor initialized Oct 5 03:29:26 taoseeker kernel: [ 0.000653] Yama: becoming mindful. Oct 5 03:29:26 taoseeker kernel: [ 0.000747] Mount-cache hash table entries: 512 Oct 5 03:29:26 taoseeker kernel: [ 0.001382] device-tree: Duplicate name in /cpus/PowerPC,G4@0, renamed to "l2-cache#1" Oct 5 03:29:26 taoseeker kernel: [ 0.007010] Initializing cgroup subsys cpuacct Oct 5 03:29:26 taoseeker kernel: [ 0.007024] Initializing cgroup subsys memory Oct 5 03:29:26 taoseeker kernel: [ 0.007056] Initializing cgroup subsys devices Oct 5 03:29:26 taoseeker kernel: [ 0.007064] Initializing cgroup subsys freezer Oct 5 03:29:26 taoseeker kernel: [ 0.007071] Initializing cgroup subsys blkio Oct 5 03:29:26 taoseeker kernel: [ 0.007078] Initializing cgroup subsys perf_event Oct 5 03:29:26 taoseeker kernel: [ 0.007184] ftrace: allocating 21198 entries in 63 pages Oct 5 03:29:26 taoseeker kernel: [ 0.039993] PowerMac SMP probe found 1 cpus Oct 5 03:29:26 taoseeker kernel: [ 0.040013] MPC7450 family performance monitor hardware support registered Oct 5 03:29:26 taoseeker kernel: [ 0.040742] Brought up 1 CPUs Oct 5 03:29:26 taoseeker kernel: [ 0.041384] devtmpfs: initialized Oct 5 03:29:26 taoseeker kernel: [ 0.041759] EVM: security.selinux Oct 5 03:29:26 taoseeker kernel: [ 0.041766] EVM: security.SMACK64 Oct 5 03:29:26 taoseeker kernel: [ 0.041771] EVM: security.capability Oct 5 03:29:26 taoseeker kernel: [ 0.044605] dummy: Oct 5 03:29:26 taoseeker kernel: [ 0.044831] NET: Registered protocol family 16 Oct 5 03:29:26 taoseeker kernel: [ 0.045834] KeyWest i2c @0xf8001003 irq 42 /uni-n@f8000000/i2c@f8001000 Oct 5 03:29:26 taoseeker kernel: [ 0.045847] channel 1 bus /uni-n@f8000000/i2c@f8001000/i2c-bus@1 Oct 5 03:29:26 taoseeker kernel: [ 0.045959] KeyWest i2c @0x80018000 irq 26 /pci@f2000000/mac-io@17/i2c@18000 Oct 5 03:29:26 taoseeker kernel: [ 0.045968] channel 0 bus /pci@f2000000/mac-io@17/i2c@18000/i2c-bus@0 Oct 5 03:29:26 taoseeker kernel: [ 0.045987] PMU i2c /pci@f2000000/mac-io@17/via-pmu@16000/pmu-i2c Oct 5 03:29:26 taoseeker kernel: [ 0.045994] channel 1 bus Oct 5 03:29:26 taoseeker kernel: [ 0.046007] channel 2 bus Oct 5 03:29:26 taoseeker kernel: [ 0.047066] PCI: Probing PCI hardware Oct 5 03:29:26 taoseeker kernel: [ 0.047165] PCI host bridge to bus 0000:00 Oct 5 03:29:26 taoseeker kernel: [ 0.047184] pci_bus 0000:00: >root bus resource [io 0x802000-0x1001fff] (bus address [0x0000-0x7fffff]) Oct 5 03:29:26 taoseeker kernel: [ 0.047195] pci_bus 0000:00: >root bus resource [mem 0xf1000000-0xf1ffffff] Oct 5 03:29:26 taoseeker kernel: [ 0.047205] pci_bus 0000:00: >root bus resource [mem 0x90000000-0x9fffffff] Oct 5 03:29:26 taoseeker kernel: [ 0.047259] pci 0000:00:0b.0: >[106b:0034] type 00 class 0x060000 Oct 5 03:29:26 taoseeker kernel: [ 0.047385] pci 0000:00:10.0: >[1002:4e56] type 00 class 0x030000 Oct 5 03:29:26 taoseeker kernel: [ 0.047414] pci 0000:00:10.0: >reg 10: [mem 0x98000000-0x9fffffff pref] Oct 5 03:29:26 taoseeker kernel: [ 0.047430] pci 0000:00:10.0: >reg 14: [io 0x802400-0x8024ff] Oct 5 03:29:26 taoseeker kernel: [ 0.047447] pci 0000:00:10.0: >reg 18: [mem 0x90000000-0x9000ffff] Oct 5 03:29:26 taoseeker kernel: [ 0.047484] pci 0000:00:10.0: >reg 30: [mem 0x90020000-0x9003ffff pref] Oct 5 03:29:26 taoseeker kernel: [ 0.047533] pci 0000:00:10.0: >supports D1 D2 Oct 5 03:29:26 taoseeker kernel: [ 0.047985] PCI host bridge to bus 0001:10 Oct 5 03:29:26 taoseeker kernel: [ 0.047998] pci_bus 0001:10: >root bus resource [io 0x0000-0x7fffff] Oct 5 03:29:26 taoseeker kernel: [ 0.048008] pci_bus 0001:10: >root bus resource [mem 0xf3000000-0xf3ffffff] Oct 5 03:29:26 taoseeker kernel: [ 0.048018] pci_bus 0001:10: >root bus resource [mem 0x80000000-0x8fffffff] Oct 5 03:29:26 taoseeker kernel: [ 0.048064] pci 0001:10:0b.0: >[106b:0035] type 00 class 0x060000 Oct 5 03:29:26 taoseeker kernel: [ 0.048157] pci 0001:10:12.0: >[14e4:4318] type 00 class 0x028000 Oct 5 03:29:26 taoseeker kernel: [ 0.048179] pci 0001:10:12.0: >reg 10: [mem 0x80084000-0x80085fff] Oct 5 03:29:26 taoseeker kernel: [ 0.048274] pci 0001:10:17.0: >[106b:003e] type 00 class 0xff0000 Oct 5 03:29:26 taoseeker kernel: [ 0.048296] pci 0001:10:17.0: >reg 10: [mem 0x80000000-0x8007ffff] Oct 5 03:29:26 taoseeker kernel: [ 0.048387] pci 0001:10:18.0: >[106b:003f] type 00 class 0x0c0310 Oct 5 03:29:26 taoseeker kernel: [ 0.048409] pci 0001:10:18.0: >reg 10: [mem 0x00000000-0x00000fff] Oct 5 03:29:26 taoseeker kernel: [ 0.048513] pci 0001:10:19.0: >[106b:003f] type 00 class 0x0c0310 Oct 5 03:29:26 taoseeker kernel: [ 0.048535] pci 0001:10:19.0: >reg 10: [mem 0x00000000-0x00000fff] Oct 5 03:29:26 taoseeker kernel: [ 0.048625] pci 0001:10:1a.0: >[106b:003f] type 00 class 0x0c0310 Oct 5 03:29:26 taoseeker kernel: [ 0.048648] pci 0001:10:1a.0: >reg 10: [mem 0x80083000-0x80083fff] Oct 5 03:29:26 taoseeker kernel: [ 0.048741] pci 0001:10:1b.0: >[1033:0035] type 00 class 0x0c0310 Oct 5 03:29:26 taoseeker kernel: [ 0.048768] pci 0001:10:1b.0: >reg 10: [mem 0x80082000-0x80082fff] Oct 5 03:29:26 taoseeker kernel: [ 0.048856] pci 0001:10:1b.0: >supports D1 D2 Oct 5 03:29:26 taoseeker kernel: [ 0.048865] pci 0001:10:1b.0: >PME# supported from D0 D1 D2 D3hot D3cold Oct 5 03:29:26 taoseeker kernel: [ 0.048907] pci 0001:10:1b.1: >[1033:0035] type 00 class 0x0c0310 Oct 5 03:29:26 taoseeker kernel: [ 0.048934] pci 0001:10:1b.1: >reg 10: [mem 0x80081000-0x80081fff] Oct 5 03:29:26 taoseeker kernel: [ 0.049022] pci 0001:10:1b.1: >supports D1 D2 Oct 5 03:29:26 taoseeker kernel: [ 0.049031] pci 0001:10:1b.1: >PME# supported from D0 D1 D2 D3hot D3cold Oct 5 03:29:26 taoseeker kernel: [ 0.049073] pci 0001:10:1b.2: >[1033:00e0] type 00 class 0x0c0320 Oct 5 03:29:26 taoseeker kernel: [ 0.049099] pci 0001:10:1b.2: >reg 10: [mem 0x80080000-0x800800ff] Oct 5 03:29:26 taoseeker kernel: [ 0.049187] pci 0001:10:1b.2: >supports D1 D2 Oct 5 03:29:26 taoseeker kernel: [ 0.049196] pci 0001:10:1b.2: >PME# supported from D0 D1 D2 D3hot D3cold Oct 5 03:29:26 taoseeker kernel: [ 0.050471] PCI host bridge to bus 0002:20 Oct 5 03:29:26 taoseeker kernel: [ 0.050488] pci_bus 0002:20: >root bus resource [io 0xff7fe000-0xffffdfff] (bus address [0x0000-0x7fffff]) Oct 5 03:29:26 taoseeker kernel: [ 0.050498] pci_bus 0002:20: >root bus resource [mem 0xf5000000-0xf5ffffff] Oct 5 03:29:26 taoseeker kernel: [ 0.050544] pci 0002:20:0b.0: >[106b:0036] type 00 class 0x060000 Oct 5 03:29:26 taoseeker kernel: [ 0.050617] pci 0002:20:0d.0: >[106b:003b] type 00 class 0xff0000 Oct 5 03:29:26 taoseeker kernel: [ 0.050637] pci 0002:20:0d.0: >reg 10: [mem 0xf5004000-0xf5007fff] Oct 5 03:29:26 taoseeker kernel: [ 0.050717] pci 0002:20:0e.0: >[106b:0031] type 00 class 0x0c0010 Oct 5 03:29:26 taoseeker kernel: [ 0.050740] pci 0002:20:0e.0: >reg 10: [mem 0xf5000000-0xf5000fff] Oct 5 03:29:26 taoseeker kernel: [ 0.050814] pci 0002:20:0e.0: >supports D1 D2 Oct 5 03:29:26 taoseeker kernel: [ 0.050823] pci 0002:20:0e.0: >PME# supported from D0 D1 D2 D3hot Oct 5 03:29:26 taoseeker kernel: [ 0.050868] pci 0002:20:0f.0: >[106b:0032] type 00 class 0x020000 Oct 5 03:29:26 taoseeker kernel: [ 0.050889] pci 0002:20:0f.0: >reg 10: [mem 0xf5200000-0xf53fffff] Oct 5 03:29:26 taoseeker kernel: [ 0.050937] pci 0002:20:0f.0: >reg 30: [mem 0xf5100000-0xf51fffff pref] Oct 5 03:29:26 taoseeker kernel: [ 0.051726] PCI 0000:00 Cannot reserve Legacy IO [io 0x802000-0x802fff] Oct 5 03:29:26 taoseeker kernel: [ 0.051796] pci_bus 0000:00: >resource 4 [io 0x802000-0x1001fff] Oct 5 03:29:26 taoseeker kernel: [ 0.051806] pci_bus 0000:00: >resource 5 [mem 0xf1000000-0xf1ffffff] Oct 5 03:29:26 taoseeker kernel: [ 0.051852] pci_bus 0000:00: >resource 6 [mem 0x90000000-0x9fffffff] Oct 5 03:29:26 taoseeker kernel: [ 0.051863] pci_bus 0001:10: >resource 4 [io 0x0000-0x7fffff] Oct 5 03:29:26 taoseeker kernel: [ 0.051873] pci_bus 0001:10: >resource 5 [mem 0xf3000000-0xf3ffffff] Oct 5 03:29:26 taoseeker kernel: [ 0.051882] pci_bus 0001:10: >resource 6 [mem 0x80000000-0x8fffffff] Oct 5 03:29:26 taoseeker kernel: [ 0.051893] pci_bus 0002:20: >resource 4 [io 0xff7fe000-0xffffdfff] Oct 5 03:29:26 taoseeker kernel: [ 0.051902] pci_bus 0002:20: >resource 5 [mem 0xf5000000-0xf5ffffff] Oct 5 03:29:26 taoseeker kernel: [ 0.055989] bio: create slab at 0 Oct 5 03:29:26 taoseeker kernel: [ 0.056860] vgaarb: device added: PCI:0000:00:10.0,decodes=io+mem,owns=mem,locks=none Oct 5 03:29:26 taoseeker kernel: [ 0.056907] vgaarb: loaded Oct 5 03:29:26 taoseeker kernel: [ 0.056912] vgaarb: bridge control possible 0000:00:10.0 Oct 5 03:29:26 taoseeker kernel: [ 0.057868] SCSI subsystem initialized Oct 5 03:29:26 taoseeker kernel: [ 0.058024] libata version 3.00 loaded. Oct 5 03:29:26 taoseeker kernel: [ 0.058203] usbcore: registered new interface driver usbfs Oct 5 03:29:26 taoseeker kernel: [ 0.058247] usbcore: registered new interface driver hub Oct 5 03:29:26 taoseeker kernel: [ 0.058340] usbcore: registered new device driver usb Oct 5 03:29:26 taoseeker kernel: [ 0.059073] NetLabel: Initializing Oct 5 03:29:26 taoseeker kernel: [ 0.059082] NetLabel: domain hash size = 128 Oct 5 03:29:26 taoseeker kernel: [ 0.059086] NetLabel: protocols = UNLABELED CIPSOv4 Oct 5 03:29:26 taoseeker kernel: [ 0.059131] NetLabel: unlabeled traffic allowed by default Oct 5 03:29:26 taoseeker kernel: [ 0.059348] Switching to clocksource timebase Oct 5 03:29:26 taoseeker kernel: [ 0.075092] AppArmor: AppArmor Filesystem Enabled Oct 5 03:29:26 taoseeker kernel: [ 0.081877] NET: Registered protocol family 2 Oct 5 03:29:26 taoseeker kernel: [ 0.082065] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) Oct 5 03:29:26 taoseeker kernel: [ 0.082732] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) Oct 5 03:29:26 taoseeker kernel: [ 0.085245] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) Oct 5 03:29:26 taoseeker kernel: [ 0.086450] TCP: Hash tables configured (established 131072 bind 65536) Oct 5 03:29:26 taoseeker kernel: [ 0.086459] TCP: reno registered Oct 5 03:29:26 taoseeker kernel: [ 0.086472] UDP hash table entries: 512 (order: 2, 16384 bytes) Oct 5 03:29:26 taoseeker kernel: [ 0.086540] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) Oct 5 03:29:26 taoseeker kernel: [ 0.086884] NET: Registered protocol family 1 Oct 5 03:29:26 taoseeker kernel: [ 0.086979] Apple USB OHCI 0001:10:18.0 disabled by firmware Oct 5 03:29:26 taoseeker kernel: [ 0.086994] pci 0001:10:18.0: >Can't enable PCI device, BIOS handoff failed. Oct 5 03:29:26 taoseeker kernel: [ 0.087009] Apple USB OHCI 0001:10:19.0 disabled by firmware Oct 5 03:29:26 taoseeker kernel: [ 0.087017] pci 0001:10:19.0: >Can't enable PCI device, BIOS handoff failed. Oct 5 03:29:26 taoseeker kernel: [ 0.087044] pci 0001:10:1a.0: >enabling device (0000 -> 0002) Oct 5 03:29:26 taoseeker kernel: [ 0.139503] pci 0001:10:1b.0: >enabling device (0000 -> 0002) Oct 5 03:29:26 taoseeker kernel: [ 0.195428] pci 0001:10:1b.1: >enabling device (0000 -> 0002) Oct 5 03:29:26 taoseeker kernel: [ 0.251422] pci 0001:10:1b.2: >enabling device (0004 -> 0006) Oct 5 03:29:26 taoseeker kernel: [ 0.251475] PCI: CLS mismatch (32 != 1020), using 32 bytes Oct 5 03:29:26 taoseeker kernel: [ 0.252024] Thermal assist unit not available Oct 5 03:29:26 taoseeker kernel: [ 0.252167] Registering PowerMac CPU frequency driver Oct 5 03:29:26 taoseeker kernel: [ 0.252174] Low: 710 Mhz, High: 1420 Mhz, Boot: 710 Mhz Oct 5 03:29:26 taoseeker kernel: [ 0.252520] Trying to unpack rootfs image as initramfs... Oct 5 03:29:26 taoseeker kernel: [ 0.260788] audit: initializing netlink socket (disabled) Oct 5 03:29:26 taoseeker kernel: [ 0.260831] type=2000 audit(1349400550.244:1): initialized Oct 5 03:29:26 taoseeker kernel: [ 0.375783] highmem bounce pool size: 64 pages Oct 5 03:29:26 taoseeker kernel: [ 0.383586] VFS: Disk quotas dquot_6.5.2 Oct 5 03:29:26 taoseeker kernel: [ 0.383747] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Oct 5 03:29:26 taoseeker kernel: [ 0.384970] fuse init (API version 7.19) Oct 5 03:29:26 taoseeker kernel: [ 0.385171] msgmni has been set to 1445 Oct 5 03:29:26 taoseeker kernel: [ 0.399700] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) Oct 5 03:29:26 taoseeker kernel: [ 0.399850] io scheduler noop registered Oct 5 03:29:26 taoseeker kernel: [ 0.399855] io scheduler deadline registered (default) Oct 5 03:29:26 taoseeker kernel: [ 0.399893] io scheduler cfq registered Oct 5 03:29:26 taoseeker kernel: [ 0.400125] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Oct 5 03:29:26 taoseeker kernel: [ 0.400149] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 Oct 5 03:29:26 taoseeker kernel: [ 0.400327] radeonfb 0000:00:10.0: >enabling device (0006 -> 0007) Oct 5 03:29:26 taoseeker kernel: [ 0.667779] radeonfb 0000:00:10.0: >Invalid ROM contents Oct 5 03:29:26 taoseeker kernel: [ 0.667800] radeonfb (0000:00:10.0): Invalid ROM signature 0 should be 0xaa55 Oct 5 03:29:26 taoseeker kernel: [ 0.667810] radeonfb: Retrieved PLL infos from Open Firmware Oct 5 03:29:26 taoseeker kernel: [ 0.667817] radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=183.00 Mhz, System=210.00 MHz Oct 5 03:29:26 taoseeker kernel: [ 0.667820] radeonfb: PLL min 12000 max 35000 Oct 5 03:29:26 taoseeker kernel: [ 0.764747] i2c i2c-2: >unable to read EDID block. Oct 5 03:29:26 taoseeker kernel: [ 0.916915] i2c i2c-2: >unable to read EDID block. Oct 5 03:29:26 taoseeker kernel: [ 1.036907] Freeing initrd memory: 15488k freed Oct 5 03:29:26 taoseeker kernel: [ 1.068445] i2c i2c-2: >unable to read EDID block. Oct 5 03:29:26 taoseeker kernel: [ 1.424370] radeonfb: Monitor 1 type LCD found Oct 5 03:29:26 taoseeker kernel: [ 1.424373] radeonfb: EDID probed Oct 5 03:29:26 taoseeker kernel: [ 1.424376] radeonfb: Monitor 2 type no found Oct 5 03:29:26 taoseeker kernel: [ 1.424389] radeonfb: Using Firmware dividers 0x00020074 from PPLL 0 Oct 5 03:29:26 taoseeker kernel: [ 1.424479] radeonfb: Dynamic Clock Power Management enabled Oct 5 03:29:26 taoseeker kernel: [ 1.495461] Console: switching to colour frame buffer device 128x48 Oct 5 03:29:26 taoseeker kernel: [ 1.555530] radeonfb: Backlight initialized (radeonbl0) Oct 5 03:29:26 taoseeker kernel: [ 1.555535] radeonfb (0000:00:10.0): ATI Radeon 4e56 "NV" Oct 5 03:29:26 taoseeker kernel: [ 1.556471] pmac_zilog: 0.6 (Benjamin Herrenschmidt ) Oct 5 03:29:26 taoseeker kernel: [ 1.556591] Generic non-volatile memory driver v1.1 Oct 5 03:29:26 taoseeker kernel: [ 1.556644] Linux agpgart interface v0.103 Oct 5 03:29:26 taoseeker kernel: [ 1.559669] brd: module loaded Oct 5 03:29:26 taoseeker kernel: [ 1.561398] loop: module loaded Oct 5 03:29:26 taoseeker kernel: [ 1.561585] MacIO PCI driver attached to Intrepid chipset Oct 5 03:29:26 taoseeker kernel: [ 1.562427] 0.00013020:ch-a: ttyPZ0 at MMIO 0x80013020 (irq = 22) is a Z85c30 ESCC - Serial port Oct 5 03:29:26 taoseeker kernel: [ 1.562691] 0.00013000:ch-b: ttyPZ1 at MMIO 0x80013000 (irq = 23) is a Z85c30 ESCC - Serial port Oct 5 03:29:26 taoseeker kernel: [ 1.563559] pata-pci-macio 0002:20:0d.0: >enabling device (0000 -> 0002) Oct 5 03:29:26 taoseeker kernel: [ 1.563736] adb: starting probe task... Oct 5 03:29:26 taoseeker kernel: [ 1.579403] pata-pci-macio 0002:20:0d.0: >Activating pata-macio chipset UniNorth ATA-6, Apple bus ID 3 Oct 5 03:29:26 taoseeker kernel: [ 1.579775] scsi0 : pata_macio Oct 5 03:29:26 taoseeker kernel: [ 1.579901] ata1: PATA max UDMA/100 irq 39 Oct 5 03:29:26 taoseeker kernel: [ 1.589363] adb devices: [2]: 2 c4 [7]: 7 1f Oct 5 03:29:26 taoseeker kernel: [ 1.594883] ADB keyboard at 2, handler 1 Oct 5 03:29:26 taoseeker kernel: [ 1.594896] Detected ADB keyboard, type ISO, swapping keys. Oct 5 03:29:26 taoseeker kernel: [ 1.594996] input: ADB keyboard as /devices/virtual/input/input0 Oct 5 03:29:26 taoseeker kernel: [ 1.595096] input: ADB Powerbook buttons as /devices/virtual/input/input1 Oct 5 03:29:26 taoseeker kernel: [ 1.595102] adb: finished probe task... Oct 5 03:29:26 taoseeker kernel: [ 1.743795] ata1.00: ATA-7: FUJITSU MHV2060AT, 008100A0, max UDMA/100 Oct 5 03:29:26 taoseeker kernel: [ 1.743801] ata1.00: 117210240 sectors, multi 16: LBA48 Oct 5 03:29:26 taoseeker kernel: [ 1.759692] ata1.00: configured for UDMA/100 Oct 5 03:29:26 taoseeker kernel: [ 1.759997] scsi 0:0:0:0: >Direct-Access ATA FUJITSU MHV2060A 0081 PQ: 0 ANSI: 5 Oct 5 03:29:26 taoseeker kernel: [ 1.760404] sd 0:0:0:0: >Attached scsi generic sg0 type 0 Oct 5 03:29:26 taoseeker kernel: [ 1.760629] sd 0:0:0:0: >[sda] 117210240 512-byte logical blocks: (60.0 GB/55.8 GiB) Oct 5 03:29:26 taoseeker kernel: [ 1.760756] sd 0:0:0:0: >[sda] Write Protect is off Oct 5 03:29:26 taoseeker kernel: [ 1.760763] sd 0:0:0:0: >[sda] Mode Sense: 00 3a 00 00 Oct 5 03:29:26 taoseeker kernel: [ 1.760812] sd 0:0:0:0: >[sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Oct 5 03:29:26 taoseeker kernel: [ 1.845879] sda: [mac] sda1 sda2 sda3 sda4 sda5 Oct 5 03:29:26 taoseeker kernel: [ 1.846709] sd 0:0:0:0: >[sda] Attached SCSI disk Oct 5 03:29:26 taoseeker kernel: [ 2.599401] pata-macio 0.00020000:ata-3: >Activating pata-macio chipset KeyLargo ATA-3, Apple bus ID 0 Oct 5 03:29:26 taoseeker kernel: [ 2.599788] scsi1 : pata_macio Oct 5 03:29:26 taoseeker kernel: [ 2.599875] ata2: PATA max MWDMA2 irq 24 Oct 5 03:29:26 taoseeker kernel: [ 2.600489] Fixed MDIO Bus: probed Oct 5 03:29:26 taoseeker kernel: [ 2.600598] tun: Universal TUN/TAP device driver, 1.6 Oct 5 03:29:26 taoseeker kernel: [ 2.600601] tun: (C) 1999-2004 Max Krasnyansky Oct 5 03:29:26 taoseeker kernel: [ 2.600721] PPP generic driver version 2.4.2 Oct 5 03:29:26 taoseeker kernel: [ 2.600829] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Oct 5 03:29:26 taoseeker kernel: [ 2.600924] ehci_hcd 0001:10:1b.2: >EHCI Host Controller Oct 5 03:29:26 taoseeker kernel: [ 2.600947] ehci_hcd 0001:10:1b.2: >new USB bus registered, assigned bus number 1 Oct 5 03:29:26 taoseeker kernel: [ 2.623464] ehci_hcd 0001:10:1b.2: >irq 63, io mem 0x80080000 Oct 5 03:29:26 taoseeker kernel: [ 2.635379] ehci_hcd 0001:10:1b.2: >USB 2.0 started, EHCI 1.00 Oct 5 03:29:26 taoseeker kernel: [ 2.635442] usb usb1: >New USB device found, idVendor=1d6b, idProduct=0002 Oct 5 03:29:26 taoseeker kernel: [ 2.635447] usb usb1: >New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 5 03:29:26 taoseeker kernel: [ 2.635453] usb usb1: >Product: EHCI Host Controller Oct 5 03:29:26 taoseeker kernel: [ 2.635457] usb usb1: >Manufacturer: Linux 3.5.0-17-powerpc-smp ehci_hcd Oct 5 03:29:26 taoseeker kernel: [ 2.635462] usb usb1: >SerialNumber: 0001:10:1b.2 Oct 5 03:29:26 taoseeker kernel: [ 2.635732] hub 1-0:1.0: >USB hub found Oct 5 03:29:26 taoseeker kernel: [ 2.635746] hub 1-0:1.0: >5 ports detected Oct 5 03:29:26 taoseeker kernel: [ 2.635981] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver Oct 5 03:29:26 taoseeker kernel: [ 2.636033] Apple USB OHCI 0001:10:18.0 disabled by firmware Oct 5 03:29:26 taoseeker kernel: [ 2.636055] Apple USB OHCI 0001:10:19.0 disabled by firmware Oct 5 03:29:26 taoseeker kernel: [ 2.636091] ohci_hcd 0001:10:1a.0: >OHCI Host Controller Oct 5 03:29:26 taoseeker kernel: [ 2.636104] ohci_hcd 0001:10:1a.0: >new USB bus registered, assigned bus number 2 Oct 5 03:29:26 taoseeker kernel: [ 2.636146] ohci_hcd 0001:10:1a.0: >irq 29, io mem 0x80083000 Oct 5 03:29:26 taoseeker kernel: [ 2.710968] usb usb2: >New USB device found, idVendor=1d6b, idProduct=0001 Oct 5 03:29:26 taoseeker kernel: [ 2.710976] usb usb2: >New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 5 03:29:26 taoseeker kernel: [ 2.710980] usb usb2: >Product: OHCI Host Controller Oct 5 03:29:26 taoseeker kernel: [ 2.710985] usb usb2: >Manufacturer: Linux 3.5.0-17-powerpc-smp ohci_hcd Oct 5 03:29:26 taoseeker kernel: [ 2.710989] usb usb2: >SerialNumber: 0001:10:1a.0 Oct 5 03:29:26 taoseeker kernel: [ 2.711224] hub 2-0:1.0: >USB hub found Oct 5 03:29:26 taoseeker kernel: [ 2.711237] hub 2-0:1.0: >2 ports detected Oct 5 03:29:26 taoseeker kernel: [ 2.711370] ohci_hcd 0001:10:1b.0: >OHCI Host Controller Oct 5 03:29:26 taoseeker kernel: [ 2.711398] ohci_hcd 0001:10:1b.0: >new USB bus registered, assigned bus number 3 Oct 5 03:29:26 taoseeker kernel: [ 2.711421] ohci_hcd 0001:10:1b.0: >irq 63, io mem 0x80082000 Oct 5 03:29:26 taoseeker kernel: [ 2.763775] ata2.00: ATAPI: MATSHITADVD-R UJ-845E, DMP2, max UDMA/66 Oct 5 03:29:26 taoseeker kernel: [ 2.787055] usb usb3: >New USB device found, idVendor=1d6b, idProduct=0001 Oct 5 03:29:26 taoseeker kernel: [ 2.787062] usb usb3: >New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 5 03:29:26 taoseeker kernel: [ 2.787066] usb usb3: >Product: OHCI Host Controller Oct 5 03:29:26 taoseeker kernel: [ 2.787071] usb usb3: >Manufacturer: Linux 3.5.0-17-powerpc-smp ohci_hcd Oct 5 03:29:26 taoseeker kernel: [ 2.787075] usb usb3: >SerialNumber: 0001:10:1b.0 Oct 5 03:29:26 taoseeker kernel: [ 2.787282] hub 3-0:1.0: >USB hub found Oct 5 03:29:26 taoseeker kernel: [ 2.787296] hub 3-0:1.0: >3 ports detected Oct 5 03:29:26 taoseeker kernel: [ 2.787447] ohci_hcd 0001:10:1b.1: >OHCI Host Controller Oct 5 03:29:26 taoseeker kernel: [ 2.787459] ohci_hcd 0001:10:1b.1: >new USB bus registered, assigned bus number 4 Oct 5 03:29:26 taoseeker kernel: [ 2.787489] ohci_hcd 0001:10:1b.1: >irq 63, io mem 0x80081000 Oct 5 03:29:26 taoseeker kernel: [ 2.795748] ata2.00: configured for MWDMA2 Oct 5 03:29:26 taoseeker kernel: [ 2.800181] scsi 1:0:0:0: >CD-ROM MATSHITA DVD-R UJ-845E DMP2 PQ: 0 ANSI: 5 Oct 5 03:29:26 taoseeker kernel: [ 2.802136] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray Oct 5 03:29:26 taoseeker kernel: [ 2.802142] cdrom: Uniform CD-ROM driver Revision: 3.20 Oct 5 03:29:26 taoseeker kernel: [ 2.802368] sr 1:0:0:0: >Attached scsi CD-ROM sr0 Oct 5 03:29:26 taoseeker kernel: [ 2.802484] sr 1:0:0:0: >Attached scsi generic sg1 type 5 Oct 5 03:29:26 taoseeker kernel: [ 2.862981] usb usb4: >New USB device found, idVendor=1d6b, idProduct=0001 Oct 5 03:29:26 taoseeker kernel: [ 2.862988] usb usb4: >New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 5 03:29:26 taoseeker kernel: [ 2.862993] usb usb4: >Product: OHCI Host Controller Oct 5 03:29:26 taoseeker kernel: [ 2.862998] usb usb4: >Manufacturer: Linux 3.5.0-17-powerpc-smp ohci_hcd Oct 5 03:29:26 taoseeker kernel: [ 2.863002] usb usb4: >SerialNumber: 0001:10:1b.1 Oct 5 03:29:26 taoseeker kernel: [ 2.863244] hub 4-0:1.0: >USB hub found Oct 5 03:29:26 taoseeker kernel: [ 2.863256] hub 4-0:1.0: >2 ports detected Oct 5 03:29:26 taoseeker kernel: [ 2.863445] uhci_hcd: USB Universal Host Controller Interface driver Oct 5 03:29:26 taoseeker kernel: [ 2.863650] usbcore: registered new interface driver libusual Oct 5 03:29:26 taoseeker kernel: [ 2.864004] mousedev: PS/2 mouse device common for all mice Oct 5 03:29:26 taoseeker kernel: [ 2.864286] PowerMac i2c bus pmu 2 registered Oct 5 03:29:26 taoseeker kernel: [ 2.864348] PowerMac i2c bus pmu 1 registered Oct 5 03:29:26 taoseeker kernel: [ 2.864407] PowerMac i2c bus mac-io 0 registered Oct 5 03:29:26 taoseeker kernel: [ 2.864547] PowerMac i2c bus uni-n 1 registered Oct 5 03:29:26 taoseeker kernel: [ 2.864604] adt746x: version 1 (supported) Oct 5 03:29:26 taoseeker kernel: [ 2.864609] sensor 0: PWR/MEMORY BOTTOMSIDE Oct 5 03:29:26 taoseeker kernel: [ 2.864612] sensor 1: CPU BOTTOMSIDE Oct 5 03:29:26 taoseeker kernel: [ 2.864615] sensor 2: GPU BOTTOMSIDE Oct 5 03:29:26 taoseeker kernel: [ 2.865041] adt746x: ADT7467 initializing Oct 5 03:29:26 taoseeker kernel: [ 2.867136] adt746x: Lowering max temperatures from 69, 92, 101 to 70, 50, 70 Oct 5 03:29:26 taoseeker kernel: [ 2.869373] device-mapper: uevent: version 1.0.3 Oct 5 03:29:26 taoseeker kernel: [ 2.869539] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com Oct 5 03:29:26 taoseeker kernel: [ 2.869553] cpuidle: using governor ladder Oct 5 03:29:26 taoseeker kernel: [ 2.869556] cpuidle: using governor menu Oct 5 03:29:26 taoseeker kernel: [ 2.869789] ashmem: initialized Oct 5 03:29:26 taoseeker kernel: [ 2.870029] TCP: cubic registered Oct 5 03:29:26 taoseeker kernel: [ 2.870296] NET: Registered protocol family 10 Oct 5 03:29:26 taoseeker kernel: [ 2.870706] NET: Registered protocol family 17 Oct 5 03:29:26 taoseeker kernel: [ 2.870743] Key type dns_resolver registered Oct 5 03:29:26 taoseeker kernel: [ 2.871107] registered taskstats version 1 Oct 5 03:29:26 taoseeker kernel: [ 2.879274] Key type trusted registered Oct 5 03:29:26 taoseeker kernel: [ 2.886571] Key type encrypted registered Oct 5 03:29:26 taoseeker kernel: [ 2.894144] input: PMU as /devices/virtual/input/input2 Oct 5 03:29:26 taoseeker kernel: [ 2.894319] Registered led device: pmu-led::front Oct 5 03:29:26 taoseeker kernel: [ 2.894329] /build/buildd/linux-3.5.0/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) Oct 5 03:29:26 taoseeker kernel: [ 2.895115] Freeing unused kernel memory: 384k freed Oct 5 03:29:26 taoseeker kernel: [ 3.047471] usb 2-1: >new full-speed USB device number 2 using ohci_hcd Oct 5 03:29:26 taoseeker kernel: [ 3.257515] usb 2-1: >New USB device found, idVendor=05ac, idProduct=1000 Oct 5 03:29:26 taoseeker kernel: [ 3.257529] usb 2-1: >New USB device strings: Mfr=0, Product=0, SerialNumber=0 Oct 5 03:29:26 taoseeker kernel: [ 3.307331] b43-pci-bridge 0001:10:12.0: >enabling device (0004 -> 0006) Oct 5 03:29:26 taoseeker kernel: [ 3.336808] ssb: Found chip with id 0x4318, rev 0x02 and package 0x02 Oct 5 03:29:26 taoseeker kernel: [ 3.336830] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x0D, vendor 0x4243) Oct 5 03:29:26 taoseeker kernel: [ 3.336837] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x09, vendor 0x4243) Oct 5 03:29:26 taoseeker kernel: [ 3.336844] ssb: Core 2 found: PCI (cc 0x804, rev 0x0C, vendor 0x4243) Oct 5 03:29:26 taoseeker kernel: [ 3.336851] ssb: Core 3 found: PCMCIA (cc 0x80D, rev 0x07, vendor 0x4243) Oct 5 03:29:26 taoseeker kernel: [ 3.387639] ssb: Sonics Silicon Backplane found on PCI device 0001:10:12.0 Oct 5 03:29:26 taoseeker kernel: [ 3.403508] usb 2-2: >new full-speed USB device number 3 using ohci_hcd Oct 5 03:29:26 taoseeker kernel: [ 3.475136] sungem.c:v1.0 David S. Miller Oct 5 03:29:26 taoseeker kernel: [ 3.492295] gem 0002:20:0f.0: >eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:11:24:d5:aa:bc Oct 5 03:29:26 taoseeker kernel: [ 3.520219] firewire_ohci 0002:20:0e.0: >enabling device (0000 -> 0002) Oct 5 03:29:26 taoseeker kernel: [ 3.575588] firewire_ohci 0002:20:0e.0: >added OHCI v1.10 device as card 0, 8 IR + 8 IT contexts, quirks 0x0 Oct 5 03:29:26 taoseeker kernel: [ 3.580448] usb 2-2: >New USB device found, idVendor=05ac, idProduct=030b Oct 5 03:29:26 taoseeker kernel: [ 3.580461] usb 2-2: >New USB device strings: Mfr=1, Product=2, SerialNumber=0 Oct 5 03:29:26 taoseeker kernel: [ 3.580467] usb 2-2: >Product: Apple Internal Trackpad Oct 5 03:29:26 taoseeker kernel: [ 3.580494] usb 2-2: >Manufacturer: Apple Computer Oct 5 03:29:26 taoseeker kernel: [ 3.705383] EXT4-fs (sda3): INFO: recovery required on readonly filesystem Oct 5 03:29:26 taoseeker kernel: [ 3.705398] EXT4-fs (sda3): write access will be enabled during recovery Oct 5 03:29:26 taoseeker kernel: [ 3.763640] input: HID 05ac:1000 as /devices/pci0001:10/0001:10:1a.0/usb2/2-1/2-1:1.0/input/input3 Oct 5 03:29:26 taoseeker kernel: [ 3.764193] hid-generic 0003:05AC:1000.0001: >input,hidraw0: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0001:10:1a.0-1/input0 Oct 5 03:29:26 taoseeker kernel: [ 3.786302] input: HID 05ac:1000 as /devices/pci0001:10/0001:10:1a.0/usb2/2-1/2-1:1.1/input/input4 Oct 5 03:29:26 taoseeker kernel: [ 3.786998] hid-generic 0003:05AC:1000.0002: >input,hidraw1: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0001:10:1a.0-1/input1 Oct 5 03:29:26 taoseeker kernel: [ 3.787739] usbcore: registered new interface driver usbhid Oct 5 03:29:26 taoseeker kernel: [ 3.787745] usbhid: USB HID core driver Oct 5 03:29:26 taoseeker kernel: [ 4.075671] firewire_core 0002:20:0e.0: created device fw0: GUID 001124fffed5aabc, S400 Oct 5 03:29:26 taoseeker kernel: [ 6.206020] EXT4-fs (sda3): orphan cleanup on readonly fs Oct 5 03:29:26 taoseeker kernel: [ 6.206064] EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 2625139 Oct 5 03:29:26 taoseeker kernel: [ 6.206287] EXT4-fs (sda3): 1 orphan inode deleted Oct 5 03:29:26 taoseeker kernel: [ 6.206293] EXT4-fs (sda3): recovery complete Oct 5 03:29:26 taoseeker kernel: [ 6.335181] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) Oct 5 03:29:26 taoseeker kernel: [ 9.335918] Adding 2439064k swap on /dev/sda4. Priority:-1 extents:1 across:2439064k Oct 5 03:29:26 taoseeker kernel: [ 10.459964] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Oct 5 03:29:26 taoseeker kernel: [ 12.261199] snd-powermac no longer handles any machines with a layout-id property in the device-tree, use snd-aoa. Oct 5 03:29:26 taoseeker kernel: [ 12.586188] apm_emu: PMU APM Emulation initialized. Oct 5 03:29:26 taoseeker kernel: [ 12.695139] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro Oct 5 03:29:26 taoseeker kernel: [ 12.881262] agpgart-uninorth 0000:00:0b.0: >Apple UniNorth 2 chipset Oct 5 03:29:26 taoseeker kernel: [ 12.882508] agpgart-uninorth 0000:00:0b.0: >configuring for size idx: 64 Oct 5 03:29:26 taoseeker kernel: [ 12.912484] agpgart-uninorth 0000:00:0b.0: >AGP aperture is 256M @ 0x0 Oct 5 03:29:26 taoseeker kernel: [ 13.451575] cfg80211: Calling CRDA to update world regulatory domain Oct 5 03:29:26 taoseeker kernel: [ 13.822389] rtc-generic rtc-generic: >rtc core: registered rtc-generic as rtc0 Oct 5 03:29:26 taoseeker kernel: [ 14.069579] ams: Found I2C based motion sensor Oct 5 03:29:26 taoseeker kernel: [ 14.703904] appletouch 2-2:1.0: >Geyser mode initialized. Oct 5 03:29:26 taoseeker kernel: [ 14.704309] input: appletouch as /devices/pci0001:10/0001:10:1a.0/usb2/2-2/2-2:1.0/input/input5 Oct 5 03:29:26 taoseeker kernel: [ 14.704849] usbcore: registered new interface driver appletouch Oct 5 03:29:26 taoseeker kernel: [ 14.882910] usb 2-1: >USB disconnect, device number 2 Oct 5 03:29:26 taoseeker kernel: [ 14.885602] usb 2-1: >usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -62 Oct 5 03:29:26 taoseeker kernel: [ 14.964922] b43-phy0: Broadcom 4318 WLAN found (core revision 9) Oct 5 03:29:26 taoseeker kernel: [ 15.032323] Broadcom 43xx driver loaded [ Features: PNL ] Oct 5 03:29:26 taoseeker kernel: [ 15.211438] usb 2-1: >new full-speed USB device number 4 using ohci_hcd Oct 5 03:29:26 taoseeker kernel: [ 15.561468] usb 2-1: >New USB device found, idVendor=05ac, idProduct=8207 Oct 5 03:29:26 taoseeker kernel: [ 15.561481] usb 2-1: >New USB device strings: Mfr=0, Product=0, SerialNumber=0 Oct 5 03:29:26 taoseeker kernel: [ 15.675861] Unable to handle kernel paging request for data at address 0x00000028 Oct 5 03:29:26 taoseeker kernel: [ 15.676337] Faulting instruction address: 0xc01708f0 Oct 5 03:29:26 taoseeker kernel: [ 15.676649] Oops: Kernel access of bad area, sig: 11 [#1] Oct 5 03:29:26 taoseeker kernel: [ 15.676973] SMP NR_CPUS=4 PowerMac Oct 5 03:29:26 taoseeker kernel: [ 15.677208] Modules linked in: joydev b43 appletouch mac80211 ams mac_hid rtc_generic input_polldev cfg80211 bcma uninorth_agp apm_emu apm_emulation snd_powermac snd_pcm snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device snd soundcore snd_page_alloc hid_generic usbhid hid firewire_ohci sungem sungem_phy firewire_core crc_itu_t ssb Oct 5 03:29:26 taoseeker kernel: [ 15.679810] NIP: c01708f0 LR: c01710e4 CTR: c0298be8 Oct 5 03:29:26 taoseeker kernel: [ 15.680110] REGS: c211bdf0 TRAP: 0300 Not tainted (3.5.0-17-powerpc-smp) Oct 5 03:29:26 taoseeker kernel: [ 15.680521] MSR: 00009032 CR: 28224424 XER: 00000000 Oct 5 03:29:26 taoseeker kernel: [ 15.681098] DAR: 00000028, DSISR: 40000000 Oct 5 03:29:26 taoseeker kernel: [ 15.681346] TASK = c22b4740[210] 'plymouthd' THREAD: c211a000 CPU: 0 Oct 5 03:29:26 taoseeker kernel: [ 15.681346] GPR00: c01710e4 c211bea0 c22b4740 c21750a0 0000000b 00004b3a 00000000 0ff810ac Oct 5 03:29:26 taoseeker kernel: [ 15.681346] GPR08: 00000000 8004667d 00000000 00000000 00000000 10029328 0ffdb414 0ffdb414 Oct 5 03:29:26 taoseeker kernel: [ 15.681346] GPR16: 1002a1cc 10623250 bf973f56 10020000 0ffdb494 00000000 10010568 1000ef7c Oct 5 03:29:26 taoseeker kernel: [ 15.681346] GPR24: 1000ec78 1000e794 00000000 00000000 c21750a0 00004b3a 00000000 c21750a0 Oct 5 03:29:26 taoseeker kernel: [ 15.684152] NIP [c01708f0] do_vfs_ioctl+0x34/0x79c Oct 5 03:29:26 taoseeker kernel: [ 15.684441] LR [c01710e4] sys_ioctl+0x8c/0x9c Oct 5 03:29:26 taoseeker kernel: [ 15.684703] Call Trace: Oct 5 03:29:26 taoseeker kernel: [ 15.684861] [c211bea0] [00000001] 0x1 (unreliable) Oct 5 03:29:26 taoseeker kernel: [ 15.685191] [c211bf10] [c01710e4] sys_ioctl+0x8c/0x9c Oct 5 03:29:26 taoseeker kernel: [ 15.685516] [c211bf40] [c001731c] ret_from_syscall+0x0/0x38 Oct 5 03:29:26 taoseeker kernel: [ 15.685869] --- Exception: c01 at 0xfeeb5f0 Oct 5 03:29:26 taoseeker kernel: [ 15.685869] LR = 0xfeeb558 Oct 5 03:29:26 taoseeker kernel: [ 15.686289] Instruction dump: Oct 5 03:29:26 taoseeker kernel: [ 15.686491] 90010004 60000000 9421ff90 7c0802a6 bf210054 90010074 3d208004 6129667d Oct 5 03:29:26 taoseeker kernel: [ 15.687123] 8143000c 7c7f1b78 7f854800 7cdb3378 <834a0028> 419e04a8 7f854840 409d008c Oct 5 03:29:26 taoseeker kernel: [ 15.687768] ---[ end trace 4167fd44535aba07 ]--- Oct 5 03:29:26 taoseeker kernel: [ 15.688046] Oct 5 03:29:26 taoseeker kernel: [ 15.701070] VFS: Close: file count is 0 Oct 5 03:29:26 taoseeker kernel: [ 15.765216] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: Oct 5 03:29:26 taoseeker kernel: [ 15.765851] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) Oct 5 03:29:26 taoseeker kernel: [ 15.766297] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: Oct 5 03:29:26 taoseeker kernel: [ 15.766902] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) Oct 5 03:29:26 taoseeker kernel: [ 15.767345] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: Oct 5 03:29:26 taoseeker kernel: [ 15.767997] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) Oct 5 03:29:26 taoseeker kernel: [ 15.768441] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: Oct 5 03:29:26 taoseeker kernel: [ 15.769041] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) Oct 5 03:29:26 taoseeker kernel: [ 15.769483] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: Oct 5 03:29:26 taoseeker kernel: [ 15.770083] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) Oct 5 03:29:26 taoseeker kernel: [ 15.770525] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: Oct 5 03:29:26 taoseeker kernel: [ 15.771125] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) Oct 5 03:29:26 taoseeker kernel: [ 15.771576] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: Oct 5 03:29:26 taoseeker kernel: [ 15.772177] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) Oct 5 03:29:26 taoseeker kernel: [ 15.772619] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: Oct 5 03:29:26 taoseeker kernel: [ 15.774912] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) Oct 5 03:29:26 taoseeker kernel: [ 15.777058] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: Oct 5 03:29:26 taoseeker kernel: [ 15.779354] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) Oct 5 03:29:26 taoseeker kernel: [ 15.781538] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: Oct 5 03:29:26 taoseeker kernel: [ 15.783869] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) Oct 5 03:29:26 taoseeker kernel: [ 15.786019] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: Oct 5 03:29:26 taoseeker kernel: [ 15.788476] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) Oct 5 03:29:26 taoseeker kernel: [ 15.790692] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: Oct 5 03:29:26 taoseeker kernel: [ 15.793007] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (600 mBi, 2000 mBm) Oct 5 03:29:26 taoseeker kernel: [ 15.795154] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: Oct 5 03:29:26 taoseeker kernel: [ 15.797490] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (600 mBi, 2000 mBm) Oct 5 03:29:26 taoseeker kernel: [ 15.799673] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule: Oct 5 03:29:26 taoseeker kernel: [ 15.802027] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (600 mBi, 2000 mBm) Oct 5 03:29:26 taoseeker kernel: [ 15.870376] Bluetooth: Core ver 2.16 Oct 5 03:29:26 taoseeker kernel: [ 15.877469] NET: Registered protocol family 31 Oct 5 03:29:26 taoseeker kernel: [ 15.879533] Bluetooth: HCI device and connection manager initialized Oct 5 03:29:26 taoseeker kernel: [ 15.883857] Bluetooth: HCI socket layer initialized Oct 5 03:29:26 taoseeker kernel: [ 15.885909] Bluetooth: L2CAP socket layer initialized Oct 5 03:29:26 taoseeker kernel: [ 15.888092] Bluetooth: SCO socket layer initialized Oct 5 03:29:26 taoseeker kernel: [ 15.915142] ieee80211 phy0: >Selected rate control algorithm 'minstrel_ht' Oct 5 03:29:26 taoseeker kernel: [ 15.924398] Registered led device: b43-phy0::tx Oct 5 03:29:26 taoseeker kernel: [ 15.926745] Registered led device: b43-phy0::rx Oct 5 03:29:26 taoseeker kernel: [ 15.931353] Registered led device: b43-phy0::radio Oct 5 03:29:26 taoseeker kernel: [ 16.002799] usbcore: registered new interface driver btusb Oct 5 03:29:26 taoseeker kernel: [ 16.234750] type=1400 audit(1349400566.216:2): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=546 comm="apparmor_parser" Oct 5 03:29:26 taoseeker kernel: [ 16.239588] type=1400 audit(1349400566.220:3): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/ntpd" pid=547 comm="apparmor_parser" Oct 5 03:29:26 taoseeker kernel: [ 16.244466] type=1400 audit(1349400566.228:4): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/ntpd" pid=602 comm="apparmor_parser" Oct 5 03:29:27 taoseeker kernel: [ 17.063484] input: Macintosh mouse button emulation as /devices/virtual/input/input6 Oct 5 03:29:27 taoseeker kernel: [ 17.736347] lp: driver loaded but no devices found Oct 5 03:29:27 taoseeker kernel: [ 17.777843] ppdev: user-space parallel port driver Oct 5 03:29:28 taoseeker kernel: [ 18.701138] Bluetooth: RFCOMM TTY layer initialized Oct 5 03:29:28 taoseeker kernel: [ 18.701175] Bluetooth: RFCOMM socket layer initialized Oct 5 03:29:28 taoseeker kernel: [ 18.701179] Bluetooth: RFCOMM ver 1.11 Oct 5 03:29:28 taoseeker kernel: [ 18.832422] type=1400 audit(1349400568.812:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=689 comm="apparmor_parser" Oct 5 03:29:28 taoseeker kernel: [ 18.833467] type=1400 audit(1349400568.812:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=689 comm="apparmor_parser" Oct 5 03:29:28 taoseeker kernel: [ 18.900520] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Oct 5 03:29:28 taoseeker kernel: [ 18.900532] Bluetooth: BNEP filters: protocol multicast Oct 5 03:29:29 taoseeker modem-manager[663]: ModemManager (version 0.5.999) starting... Oct 5 03:29:29 taoseeker kernel: [ 19.696559] type=1400 audit(1349400569.676:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=767 comm="apparmor_parser" Oct 5 03:29:29 taoseeker kernel: [ 19.697280] type=1400 audit(1349400569.676:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=767 comm="apparmor_parser" Oct 5 03:29:29 taoseeker kernel: [ 19.957529] type=1400 audit(1349400569.940:9): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=782 comm="apparmor_parser" Oct 5 03:29:29 taoseeker kernel: [ 19.958806] type=1400 audit(1349400569.940:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=782 comm="apparmor_parser" Oct 5 03:29:29 taoseeker kernel: [ 19.959302] type=1400 audit(1349400569.940:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=782 comm="apparmor_parser" Oct 5 03:29:31 taoseeker NetworkManager[802]: NetworkManager (version 0.9.6.0) is starting... Oct 5 03:29:31 taoseeker NetworkManager[802]: Read config file /etc/NetworkManager/NetworkManager.conf Oct 5 03:29:31 taoseeker NetworkManager[802]: WEXT support is enabled Oct 5 03:29:31 taoseeker modem-manager[663]: Loaded plugin 'Wavecom' Oct 5 03:29:31 taoseeker modem-manager[663]: Loaded plugin 'Ericsson MBM' Oct 5 03:29:31 taoseeker modem-manager[663]: Loaded plugin 'SimTech' Oct 5 03:29:31 taoseeker modem-manager[663]: Loaded plugin 'Novatel' Oct 5 03:29:31 taoseeker modem-manager[663]: Loaded plugin 'Nokia' Oct 5 03:29:31 taoseeker modem-manager[663]: Loaded plugin 'AnyData' Oct 5 03:29:31 taoseeker modem-manager[663]: Loaded plugin 'MotoC' Oct 5 03:29:31 taoseeker modem-manager[663]: Loaded plugin 'Option High-Speed' Oct 5 03:29:31 taoseeker modem-manager[663]: Loaded plugin 'X22X' Oct 5 03:29:31 taoseeker modem-manager[663]: Loaded plugin 'Linktop' Oct 5 03:29:31 taoseeker modem-manager[663]: Loaded plugin 'Longcheer' Oct 5 03:29:31 taoseeker modem-manager[663]: Loaded plugin 'Sierra' Oct 5 03:29:31 taoseeker modem-manager[663]: Loaded plugin 'Option' Oct 5 03:29:31 taoseeker modem-manager[663]: Loaded plugin 'Gobi' Oct 5 03:29:31 taoseeker modem-manager[663]: Loaded plugin 'Samsung' Oct 5 03:29:31 taoseeker modem-manager[663]: Loaded plugin 'Huawei' Oct 5 03:29:31 taoseeker modem-manager[663]: Loaded plugin 'ZTE' Oct 5 03:29:31 taoseeker modem-manager[663]: Loaded plugin 'Cinterion' Oct 5 03:29:31 taoseeker modem-manager[663]: Loaded plugin 'Iridium' Oct 5 03:29:31 taoseeker modem-manager[663]: Loaded plugin 'Generic' Oct 5 03:29:31 taoseeker modem-manager[663]: Successfully loaded 20 plugins Oct 5 03:29:31 taoseeker kernel: [ 21.509913] type=1400 audit(1349400571.488:12): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=788 comm="apparmor_parser" Oct 5 03:29:31 taoseeker kernel: [ 21.521708] type=1400 audit(1349400571.500:13): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//sanitized_helper" pid=788 comm="apparmor_parser" Oct 5 03:29:31 taoseeker kernel: [ 21.526368] type=1400 audit(1349400571.504:14): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=788 comm="apparmor_parser" Oct 5 03:29:31 taoseeker kernel: [ 21.541841] type=1400 audit(1349400571.520:15): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer//sanitized_helper" pid=788 comm="apparmor_parser" Oct 5 03:29:31 taoseeker kernel: [ 21.545888] type=1400 audit(1349400571.524:16): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=788 comm="apparmor_parser" Oct 5 03:29:31 taoseeker kernel: [ 21.558880] type=1400 audit(1349400571.536:17): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer//sanitized_helper" pid=788 comm="apparmor_parser" Oct 5 03:29:31 taoseeker modem-manager[663]: (ttyPZ1) opening serial port... Oct 5 03:29:31 taoseeker kernel: [ 21.612581] type=1400 audit(1349400571.592:18): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=825 comm="apparmor_parser" Oct 5 03:29:31 taoseeker kernel: [ 21.613723] type=1400 audit(1349400571.592:19): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=825 comm="apparmor_parser" Oct 5 03:29:31 taoseeker modem-manager[663]: (ttyPZ1): port attributes not fully set Oct 5 03:29:31 taoseeker modem-manager[663]: (ttyPZ0) opening serial port... Oct 5 03:29:31 taoseeker modem-manager[663]: (ttyPZ0): port attributes not fully set Oct 5 03:29:31 taoseeker kernel: [ 21.629652] type=1400 audit(1349400571.608:20): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/ntpd" pid=826 comm="apparmor_parser" Oct 5 03:29:31 taoseeker kernel: [ 21.909143] type=1400 audit(1349400571.888:21): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=828 comm="apparmor_parser" Oct 5 03:29:32 taoseeker NetworkManager[802]: DNS: loaded plugin dnsmasq Oct 5 03:29:34 taoseeker NetworkManager[802]: SCPlugin-Ifupdown: init! Oct 5 03:29:34 taoseeker NetworkManager[802]: SCPlugin-Ifupdown: update_system_hostname Oct 5 03:29:34 taoseeker NetworkManager[802]: SCPluginIfupdown: management mode: unmanaged Oct 5 03:29:34 taoseeker NetworkManager[802]: SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0001:10/0001:10:12.0/ssb0:0/net/wlan2, iface: wlan2) Oct 5 03:29:34 taoseeker NetworkManager[802]: SCPlugin-Ifupdown: device added (path: /sys/devices/pci0001:10/0001:10:12.0/ssb0:0/net/wlan2, iface: wlan2): no ifupdown configuration found. Oct 5 03:29:34 taoseeker NetworkManager[802]: SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0002:20/0002:20:0f.0/net/eth0, iface: eth0) Oct 5 03:29:34 taoseeker NetworkManager[802]: SCPlugin-Ifupdown: device added (path: /sys/devices/pci0002:20/0002:20:0f.0/net/eth0, iface: eth0): no ifupdown configuration found. Oct 5 03:29:34 taoseeker NetworkManager[802]: SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/lo, iface: lo) Oct 5 03:29:34 taoseeker NetworkManager[802]: SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/lo, iface: lo): no ifupdown configuration found. Oct 5 03:29:34 taoseeker NetworkManager[802]: SCPlugin-Ifupdown: end _init. Oct 5 03:29:34 taoseeker NetworkManager[802]: Loaded plugin ifupdown: (C) 2008 Canonical Ltd. To report bugs please use the NetworkManager mailing list. Oct 5 03:29:34 taoseeker NetworkManager[802]: Loaded plugin keyfile: (c) 2007 - 2010 Red Hat, Inc. To report bugs please use the NetworkManager mailing list. Oct 5 03:29:34 taoseeker NetworkManager[802]: Ifupdown: get unmanaged devices count: 0 Oct 5 03:29:34 taoseeker NetworkManager[802]: SCPlugin-Ifupdown: (276022688) ... get_connections. Oct 5 03:29:34 taoseeker NetworkManager[802]: SCPlugin-Ifupdown: (276022688) ... get_connections (managed=false): return empty list. Oct 5 03:29:34 taoseeker NetworkManager[802]: keyfile: parsing Auto Ethernet ... Oct 5 03:29:34 taoseeker NetworkManager[802]: keyfile: read connection 'Auto Ethernet' Oct 5 03:29:34 taoseeker NetworkManager[802]: keyfile: parsing Telenor6904ett ... Oct 5 03:29:35 taoseeker NetworkManager[802]: keyfile: read connection 'Telenor6904ett' Oct 5 03:29:35 taoseeker NetworkManager[802]: Ifupdown: get unmanaged devices count: 0 Oct 5 03:29:35 taoseeker NetworkManager[802]: modem-manager is now available Oct 5 03:29:35 taoseeker NetworkManager[802]: monitoring kernel firmware directory '/lib/firmware'. Oct 5 03:29:35 taoseeker NetworkManager[802]: found WiFi radio killswitch rfkill0 (at /sys/devices/pci0001:10/0001:10:12.0/ssb0:0/ieee80211/phy0/rfkill0) (driver (unknown)) Oct 5 03:29:35 taoseeker NetworkManager[802]: WiFi enabled by radio killswitch; enabled by state file Oct 5 03:29:35 taoseeker NetworkManager[802]: WWAN enabled by radio killswitch; enabled by state file Oct 5 03:29:35 taoseeker NetworkManager[802]: WiMAX enabled by radio killswitch; enabled by state file Oct 5 03:29:35 taoseeker NetworkManager[802]: Networking is enabled by state file Oct 5 03:29:35 taoseeker NetworkManager[802]: (wlan2): using nl80211 for WiFi device control Oct 5 03:29:35 taoseeker NetworkManager[802]: (wlan2): driver supports Access Point (AP) mode Oct 5 03:29:35 taoseeker NetworkManager[802]: (wlan2): new 802.11 WiFi device (driver: 'b43' ifindex: 3) Oct 5 03:29:35 taoseeker NetworkManager[802]: (wlan2): exported as /org/freedesktop/NetworkManager/Devices/0 Oct 5 03:29:35 taoseeker NetworkManager[802]: (wlan2): now managed Oct 5 03:29:35 taoseeker NetworkManager[802]: (wlan2): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2] Oct 5 03:29:35 taoseeker NetworkManager[802]: (wlan2): bringing up device. Oct 5 03:29:35 taoseeker kernel: [ 25.515400] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07) Oct 5 03:29:35 taoseeker NetworkManager[802]: (wlan2): preparing device. Oct 5 03:29:35 taoseeker kernel: [ 25.604356] IPv6: ADDRCONF(NETDEV_UP): wlan2: link is not ready Oct 5 03:29:35 taoseeker NetworkManager[802]: (wlan2): deactivating device (reason 'managed') [2] Oct 5 03:29:35 taoseeker kernel: [ 25.607986] IPv6: ADDRCONF(NETDEV_UP): wlan2: link is not ready Oct 5 03:29:35 taoseeker NetworkManager[802]: failed to allocate link cache: (-10) Operation not supported Oct 5 03:29:35 taoseeker NetworkManager[802]: (eth0): carrier is OFF Oct 5 03:29:35 taoseeker NetworkManager[802]: [1349400575.613225] [nm-device-ethernet.c:456] real_update_permanent_hw_address(): (eth0): unable to read permanent MAC address (error 0) Oct 5 03:29:35 taoseeker NetworkManager[802]: (eth0): new Ethernet device (driver: 'gem' ifindex: 2) Oct 5 03:29:35 taoseeker NetworkManager[802]: (eth0): exported as /org/freedesktop/NetworkManager/Devices/1 Oct 5 03:29:35 taoseeker NetworkManager[802]: (eth0): now managed Oct 5 03:29:35 taoseeker NetworkManager[802]: (eth0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2] Oct 5 03:29:35 taoseeker NetworkManager[802]: (eth0): bringing up device. Oct 5 03:29:35 taoseeker NetworkManager[802]: (eth0): preparing device. Oct 5 03:29:35 taoseeker NetworkManager[802]: (eth0): deactivating device (reason 'managed') [2] Oct 5 03:29:35 taoseeker kernel: [ 25.855707] sungem_phy: PHY ID: 4061e4, addr: 0 Oct 5 03:29:35 taoseeker kernel: [ 25.856063] gem 0002:20:0f.0: >eth0: Found BCM5221 PHY Oct 5 03:29:35 taoseeker kernel: [ 25.856905] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Oct 5 03:29:35 taoseeker kernel: [ 25.858464] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Oct 5 03:29:35 taoseeker NetworkManager[802]: /sys/devices/virtual/net/lo: couldn't determine device driver; ignoring... Oct 5 03:29:35 taoseeker NetworkManager[802]: /sys/devices/virtual/net/lo: couldn't determine device driver; ignoring... Oct 5 03:29:36 taoseeker NetworkManager[802]: wpa_supplicant started Oct 5 03:29:36 taoseeker NetworkManager[802]: (wlan2) supports 4 scan SSIDs Oct 5 03:29:36 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: starting -> ready Oct 5 03:29:36 taoseeker NetworkManager[802]: (wlan2): device state change: unavailable -> disconnected (reason 'supplicant-available') [20 30 42] Oct 5 03:29:36 taoseeker NetworkManager[802]: Trying to remove a non-existant call id. Oct 5 03:29:36 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: ready -> inactive Oct 5 03:29:36 taoseeker NetworkManager[802]: (wlan2) supports 4 scan SSIDs Oct 5 03:29:40 taoseeker NetworkManager[802]: Auto-activating connection 'Telenor6904ett'. Oct 5 03:29:40 taoseeker NetworkManager[802]: Activation (wlan2) starting connection 'Telenor6904ett' Oct 5 03:29:40 taoseeker NetworkManager[802]: (wlan2): device state change: disconnected -> prepare (reason 'none') [30 40 0] Oct 5 03:29:40 taoseeker NetworkManager[802]: Activation (wlan2) Stage 1 of 5 (Device Prepare) scheduled... Oct 5 03:29:40 taoseeker NetworkManager[802]: Activation (wlan2) Stage 1 of 5 (Device Prepare) started... Oct 5 03:29:40 taoseeker NetworkManager[802]: Activation (wlan2) Stage 2 of 5 (Device Configure) scheduled... Oct 5 03:29:40 taoseeker NetworkManager[802]: Activation (wlan2) Stage 1 of 5 (Device Prepare) complete. Oct 5 03:29:40 taoseeker NetworkManager[802]: Activation (wlan2) Stage 2 of 5 (Device Configure) starting... Oct 5 03:29:40 taoseeker NetworkManager[802]: (wlan2): device state change: prepare -> config (reason 'none') [40 50 0] Oct 5 03:29:40 taoseeker NetworkManager[802]: Activation (wlan2/wireless): connection 'Telenor6904ett' has security, and secrets exist. No new secrets needed. Oct 5 03:29:40 taoseeker NetworkManager[802]: Config: added 'ssid' value 'Telenor6904ett' Oct 5 03:29:40 taoseeker NetworkManager[802]: Config: added 'scan_ssid' value '1' Oct 5 03:29:40 taoseeker NetworkManager[802]: Config: added 'key_mgmt' value 'WPA-PSK' Oct 5 03:29:40 taoseeker NetworkManager[802]: Config: added 'auth_alg' value 'OPEN' Oct 5 03:29:40 taoseeker NetworkManager[802]: Config: added 'psk' value '' Oct 5 03:29:40 taoseeker NetworkManager[802]: Activation (wlan2) Stage 2 of 5 (Device Configure) complete. Oct 5 03:29:40 taoseeker NetworkManager[802]: Config: set interface ap_scan to 1 Oct 5 03:29:40 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: inactive -> scanning Oct 5 03:29:41 taoseeker wpa_supplicant[987]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 03:29:41 taoseeker kernel: [ 31.454567] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 03:29:41 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 03:29:41 taoseeker kernel: [ 31.483501] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 03:29:41 taoseeker kernel: [ 31.687343] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 03:29:41 taoseeker kernel: [ 31.891289] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 03:29:42 taoseeker kernel: [ 32.095276] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 03:29:42 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 03:29:42 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 03:29:43 taoseeker wpa_supplicant[987]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 03:29:43 taoseeker kernel: [ 33.360448] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 03:29:43 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 03:29:43 taoseeker kernel: [ 33.371631] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 03:29:43 taoseeker kernel: [ 33.575263] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 03:29:43 taoseeker wpa_supplicant[987]: wlan2: Trying to associate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 03:29:43 taoseeker kernel: [ 33.584106] wlan2: authenticated Oct 5 03:29:43 taoseeker kernel: [ 33.584774] wlan2: associating with AP with corrupt beacon Oct 5 03:29:43 taoseeker kernel: [ 33.587287] wlan2: associate with 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 03:29:43 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: authenticating -> associating Oct 5 03:29:43 taoseeker kernel: [ 33.594298] wlan2: RX AssocResp from 50:67:f0:d3:ed:c4 (capab=0xc11 status=0 aid=1) Oct 5 03:29:43 taoseeker kernel: [ 33.594800] wlan2: associated Oct 5 03:29:43 taoseeker kernel: [ 33.595419] IPv6: ADDRCONF(NETDEV_CHANGE): wlan2: link becomes ready Oct 5 03:29:43 taoseeker kernel: [ 33.595610] cfg80211: Pending regulatory request, waiting for it to be processed... Oct 5 03:29:43 taoseeker wpa_supplicant[987]: wlan2: Associated with 50:67:f0:d3:ed:c4 Oct 5 03:29:43 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: associating -> associated Oct 5 03:29:44 taoseeker modem-manager[663]: (ttyPZ1) closing serial port... Oct 5 03:29:44 taoseeker modem-manager[663]: (ttyPZ1) serial port closed Oct 5 03:29:44 taoseeker modem-manager[663]: (ttyPZ1) opening serial port... Oct 5 03:29:44 taoseeker modem-manager[663]: (ttyPZ0) closing serial port... Oct 5 03:29:44 taoseeker modem-manager[663]: (ttyPZ0) serial port closed Oct 5 03:29:44 taoseeker modem-manager[663]: (ttyPZ0) opening serial port... Oct 5 03:29:44 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: associated -> 4-way handshake Oct 5 03:29:44 taoseeker wpa_supplicant[987]: wlan2: WPA: Key negotiation completed with 50:67:f0:d3:ed:c4 [PTK=CCMP GTK=CCMP] Oct 5 03:29:44 taoseeker wpa_supplicant[987]: wlan2: CTRL-EVENT-CONNECTED - Connection to 50:67:f0:d3:ed:c4 completed (auth) [id=0 id_str=] Oct 5 03:29:44 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: 4-way handshake -> completed Oct 5 03:29:44 taoseeker NetworkManager[802]: Activation (wlan2/wireless) Stage 2 of 5 (Device Configure) successful. Connected to wireless network 'Telenor6904ett'. Oct 5 03:29:44 taoseeker NetworkManager[802]: Activation (wlan2) Stage 3 of 5 (IP Configure Start) scheduled. Oct 5 03:29:44 taoseeker NetworkManager[802]: Activation (wlan2) Stage 3 of 5 (IP Configure Start) started... Oct 5 03:29:44 taoseeker NetworkManager[802]: (wlan2): device state change: config -> ip-config (reason 'none') [50 70 0] Oct 5 03:29:44 taoseeker NetworkManager[802]: Activation (wlan2) Beginning DHCPv4 transaction (timeout in 45 seconds) Oct 5 03:29:44 taoseeker NetworkManager[802]: dhclient started with pid 1173 Oct 5 03:29:44 taoseeker NetworkManager[802]: Activation (wlan2) Beginning IP6 addrconf. Oct 5 03:29:44 taoseeker NetworkManager[802]: Activation (wlan2) Stage 3 of 5 (IP Configure Start) complete. Oct 5 03:29:45 taoseeker dhclient: Internet Systems Consortium DHCP Client 4.2.4 Oct 5 03:29:45 taoseeker dhclient: Copyright 2004-2012 Internet Systems Consortium. Oct 5 03:29:45 taoseeker dhclient: All rights reserved. Oct 5 03:29:45 taoseeker dhclient: For info, please visit https://www.isc.org/software/dhcp/ Oct 5 03:29:45 taoseeker dhclient: Oct 5 03:29:46 taoseeker dhclient: Listening on LPF/wlan2/00:14:51:81:6a:17 Oct 5 03:29:46 taoseeker dhclient: Sending on LPF/wlan2/00:14:51:81:6a:17 Oct 5 03:29:46 taoseeker dhclient: Sending on Socket/fallback Oct 5 03:29:46 taoseeker dhclient: DHCPREQUEST of 10.0.0.66 on wlan2 to 255.255.255.255 port 67 Oct 5 03:29:46 taoseeker NetworkManager[802]: (wlan2): DHCPv4 state changed nbi -> preinit Oct 5 03:29:46 taoseeker dhclient: DHCPACK of 10.0.0.66 from 10.0.0.138 Oct 5 03:29:46 taoseeker dhclient: bound to 10.0.0.66 -- renewal in 41445 seconds. Oct 5 03:29:46 taoseeker NetworkManager[802]: (wlan2): DHCPv4 state changed preinit -> reboot Oct 5 03:29:46 taoseeker NetworkManager[802]: address 10.0.0.66 Oct 5 03:29:46 taoseeker NetworkManager[802]: prefix 24 (255.255.255.0) Oct 5 03:29:46 taoseeker NetworkManager[802]: gateway 10.0.0.138 Oct 5 03:29:46 taoseeker NetworkManager[802]: hostname 'taoseeker' Oct 5 03:29:46 taoseeker NetworkManager[802]: nameserver '130.67.15.198' Oct 5 03:29:46 taoseeker NetworkManager[802]: nameserver '193.213.112.4' Oct 5 03:29:46 taoseeker NetworkManager[802]: nameserver '10.0.0.138' Oct 5 03:29:46 taoseeker NetworkManager[802]: domain name 'lan' Oct 5 03:29:46 taoseeker NetworkManager[802]: Activation (wlan2) Stage 5 of 5 (IPv4 Configure Commit) scheduled... Oct 5 03:29:46 taoseeker NetworkManager[802]: Activation (wlan2) Stage 5 of 5 (IPv4 Commit) started... Oct 5 03:29:47 taoseeker NetworkManager[802]: (wlan2): device state change: ip-config -> activated (reason 'none') [70 100 0] Oct 5 03:29:47 taoseeker NetworkManager[802]: DNS: starting dnsmasq... Oct 5 03:29:47 taoseeker NetworkManager[802]: [1349400587.861898] [nm-dns-dnsmasq.c:390] update(): dnsmasq not available on the bus, can't update servers. Oct 5 03:29:47 taoseeker NetworkManager[802]: [1349400587.862376] [nm-dns-dnsmasq.c:392] update(): dnsmasq owner not found on bus: Could not get owner of name 'org.freedesktop.NetworkManager.dnsmasq': no such name Oct 5 03:29:47 taoseeker NetworkManager[802]: DNS: plugin dnsmasq update failed Oct 5 03:29:47 taoseeker NetworkManager[802]: ((null)): writing resolv.conf to /sbin/resolvconf Oct 5 03:29:48 taoseeker NetworkManager[802]: Policy set 'Telenor6904ett' (wlan2) as default for IPv4 routing and DNS. Oct 5 03:29:48 taoseeker NetworkManager[802]: Activation (wlan2) successful, device activated. Oct 5 03:29:48 taoseeker NetworkManager[802]: Activation (wlan2) Stage 5 of 5 (IPv4 Commit) complete. Oct 5 03:29:48 taoseeker NetworkManager[802]: dnsmasq appeared on DBus: :1.22 Oct 5 03:29:48 taoseeker NetworkManager[802]: ((null)): writing resolv.conf to /sbin/resolvconf Oct 5 03:29:50 taoseeker modem-manager[663]: (ttyPZ1) closing serial port... Oct 5 03:29:50 taoseeker modem-manager[663]: (ttyPZ1) serial port closed Oct 5 03:29:50 taoseeker modem-manager[663]: (ttyPZ0) closing serial port... Oct 5 03:29:50 taoseeker modem-manager[663]: (ttyPZ0) serial port closed Oct 5 03:29:50 taoseeker modem-manager[663]: (ttyPZ1) opening serial port... Oct 5 03:29:50 taoseeker modem-manager[663]: (ttyPZ1): port attributes not fully set Oct 5 03:29:50 taoseeker modem-manager[663]: (ttyPZ0) opening serial port... Oct 5 03:29:50 taoseeker modem-manager[663]: (ttyPZ0): port attributes not fully set Oct 5 03:30:02 taoseeker modem-manager[663]: (ttyPZ1) closing serial port... Oct 5 03:30:02 taoseeker modem-manager[663]: (ttyPZ1) serial port closed Oct 5 03:30:02 taoseeker modem-manager[663]: (ttyPZ1) opening serial port... Oct 5 03:30:02 taoseeker modem-manager[663]: (ttyPZ0) closing serial port... Oct 5 03:30:02 taoseeker modem-manager[663]: (ttyPZ0) serial port closed Oct 5 03:30:02 taoseeker modem-manager[663]: (ttyPZ0) opening serial port... Oct 5 03:30:05 taoseeker NetworkManager[802]: (wlan2): IP6 addrconf timed out or failed. Oct 5 03:30:05 taoseeker NetworkManager[802]: Activation (wlan2) Stage 4 of 5 (IPv6 Configure Timeout) scheduled... Oct 5 03:30:05 taoseeker NetworkManager[802]: Activation (wlan2) Stage 4 of 5 (IPv6 Configure Timeout) started... Oct 5 03:30:05 taoseeker NetworkManager[802]: Activation (wlan2) Stage 4 of 5 (IPv6 Configure Timeout) complete. Oct 5 03:30:08 taoseeker modem-manager[663]: (ttyPZ1) closing serial port... Oct 5 03:30:08 taoseeker modem-manager[663]: (ttyPZ1) serial port closed Oct 5 03:30:08 taoseeker modem-manager[663]: (ttyPZ0) closing serial port... Oct 5 03:30:08 taoseeker modem-manager[663]: (ttyPZ0) serial port closed Oct 5 03:30:35 taoseeker kernel: [ 85.601379] ondemand governor failed, too long transition latency of HW, fallback to performance governor Oct 5 03:30:50 taoseeker wpa_supplicant[987]: wlan2: CTRL-EVENT-DISCONNECTED bssid=50:67:f0:d3:ed:c4 reason=4 Oct 5 03:30:50 taoseeker kernel: [ 100.309336] ieee80211 phy0: >wlan2: No probe response from AP 50:67:f0:d3:ed:c4 after 500ms, disconnecting. Oct 5 03:30:50 taoseeker kernel: [ 100.311473] cfg80211: All devices are disconnected, going to restore regulatory settings Oct 5 03:30:50 taoseeker kernel: [ 100.311491] cfg80211: Restoring regulatory settings Oct 5 03:30:50 taoseeker kernel: [ 100.311505] cfg80211: Calling CRDA for country: NO Oct 5 03:30:50 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: completed -> disconnected Oct 5 03:30:50 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 03:30:51 taoseeker wpa_supplicant[987]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 03:30:51 taoseeker kernel: [ 101.565831] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 03:30:51 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 03:30:51 taoseeker kernel: [ 101.577063] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 03:30:51 taoseeker kernel: [ 101.780583] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 03:30:51 taoseeker wpa_supplicant[987]: wlan2: Trying to associate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 03:30:51 taoseeker kernel: [ 101.784761] wlan2: authenticated Oct 5 03:30:51 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: authenticating -> associating Oct 5 03:30:51 taoseeker kernel: [ 101.792589] wlan2: associating with AP with corrupt beacon Oct 5 03:30:51 taoseeker kernel: [ 101.796914] wlan2: associate with 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 03:30:52 taoseeker kernel: [ 102.000412] wlan2: associate with 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 03:30:52 taoseeker kernel: [ 102.204332] wlan2: associate with 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 03:30:52 taoseeker kernel: [ 102.408262] wlan2: association with 50:67:f0:d3:ed:c4 timed out Oct 5 03:30:52 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: associating -> disconnected Oct 5 03:30:52 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 03:30:53 taoseeker wpa_supplicant[987]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 03:30:53 taoseeker kernel: [ 103.680854] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 03:30:53 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 03:30:53 taoseeker kernel: [ 103.691982] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 03:30:53 taoseeker kernel: [ 103.895598] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 03:30:54 taoseeker NetworkManager[802]: (wlan2): roamed from BSSID 50:67:F0:D3:ED:C4 (Telenor6904ett) to (none) ((none)) Oct 5 03:30:54 taoseeker kernel: [ 104.099390] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 03:30:54 taoseeker kernel: [ 104.303280] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 03:30:54 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 03:30:54 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 03:30:55 taoseeker wpa_supplicant[987]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 03:30:55 taoseeker kernel: [ 105.575924] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 03:30:55 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 03:30:55 taoseeker kernel: [ 105.587000] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 03:30:55 taoseeker kernel: [ 105.790531] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 03:30:56 taoseeker kernel: [ 105.994426] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 03:30:56 taoseeker kernel: [ 106.198296] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 03:30:56 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 03:30:56 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 03:30:57 taoseeker wpa_supplicant[987]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 03:30:57 taoseeker kernel: [ 107.462898] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 03:30:57 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 03:30:57 taoseeker kernel: [ 107.474028] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 03:30:57 taoseeker kernel: [ 107.677553] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 03:30:57 taoseeker kernel: [ 107.881457] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 03:30:58 taoseeker kernel: [ 108.085649] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 03:30:58 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 03:30:58 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 03:30:59 taoseeker wpa_supplicant[987]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 03:30:59 taoseeker kernel: [ 109.365923] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 03:30:59 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 03:30:59 taoseeker kernel: [ 109.392895] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 03:30:59 taoseeker kernel: [ 109.596572] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 03:30:59 taoseeker kernel: [ 109.800470] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 03:31:00 taoseeker kernel: [ 110.004346] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 03:31:00 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 03:31:00 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 03:31:01 taoseeker wpa_supplicant[987]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 03:31:01 taoseeker kernel: [ 111.268873] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 03:31:01 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 03:31:01 taoseeker kernel: [ 111.280175] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 03:31:01 taoseeker kernel: [ 111.483589] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 03:31:01 taoseeker kernel: [ 111.687507] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 03:31:01 taoseeker kernel: [ 111.891377] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 03:31:01 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 03:31:02 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 03:31:03 taoseeker wpa_supplicant[987]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 03:31:03 taoseeker kernel: [ 113.147895] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 03:31:03 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 03:31:03 taoseeker kernel: [ 113.159153] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 03:31:03 taoseeker kernel: [ 113.362638] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 03:31:03 taoseeker kernel: [ 113.566533] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 03:31:03 taoseeker kernel: [ 113.770488] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 03:31:03 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 03:31:03 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 03:31:05 taoseeker wpa_supplicant[987]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 03:31:05 taoseeker kernel: [ 115.058954] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 03:31:05 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 03:31:05 taoseeker kernel: [ 115.070110] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 03:31:05 taoseeker kernel: [ 115.273666] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 03:31:05 taoseeker kernel: [ 115.477562] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 03:31:05 taoseeker kernel: [ 115.681441] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 03:31:05 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 03:31:05 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 03:31:06 taoseeker NetworkManager[802]: (wlan2): link timed out. Oct 5 03:31:06 taoseeker NetworkManager[802]: (wlan2): device state change: activated -> failed (reason 'supplicant-timeout') [100 120 11] Oct 5 03:31:06 taoseeker NetworkManager[802]: Activation (wlan2) failed for connection 'Telenor6904ett' Oct 5 03:31:06 taoseeker NetworkManager[802]: (wlan2): device state change: failed -> disconnected (reason 'none') [120 30 0] Oct 5 03:31:06 taoseeker NetworkManager[802]: (wlan2): deactivating device (reason 'none') [0] Oct 5 03:31:06 taoseeker NetworkManager[802]: (wlan2): canceled DHCP transaction, DHCP client pid 1173 Oct 5 03:31:06 taoseeker kernel: [ 116.074543] IPv6: ADDRCONF(NETDEV_UP): wlan2: link is not ready Oct 5 03:31:06 taoseeker NetworkManager[802]: DNS: plugin dnsmasq update failed Oct 5 03:31:06 taoseeker NetworkManager[802]: ((null)): removing resolv.conf from /sbin/resolvconf Oct 5 03:31:06 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: scanning -> disconnected Oct 5 03:31:09 taoseeker NetworkManager[802]: Auto-activating connection 'Telenor6904ett'. Oct 5 03:31:09 taoseeker NetworkManager[802]: Activation (wlan2) starting connection 'Telenor6904ett' Oct 5 03:31:09 taoseeker NetworkManager[802]: (wlan2): device state change: disconnected -> prepare (reason 'none') [30 40 0] Oct 5 03:31:09 taoseeker NetworkManager[802]: Activation (wlan2) Stage 1 of 5 (Device Prepare) scheduled... Oct 5 03:31:09 taoseeker NetworkManager[802]: Activation (wlan2) Stage 1 of 5 (Device Prepare) started... Oct 5 03:31:09 taoseeker NetworkManager[802]: Activation (wlan2) Stage 2 of 5 (Device Configure) scheduled... Oct 5 03:31:09 taoseeker NetworkManager[802]: Activation (wlan2) Stage 1 of 5 (Device Prepare) complete. Oct 5 03:31:09 taoseeker NetworkManager[802]: Activation (wlan2) Stage 2 of 5 (Device Configure) starting... Oct 5 03:31:09 taoseeker NetworkManager[802]: (wlan2): device state change: prepare -> config (reason 'none') [40 50 0] Oct 5 03:31:09 taoseeker NetworkManager[802]: Activation (wlan2/wireless): access point 'Telenor6904ett' has security, but secrets are required. Oct 5 03:31:09 taoseeker NetworkManager[802]: (wlan2): device state change: config -> need-auth (reason 'none') [50 60 0] Oct 5 03:31:09 taoseeker NetworkManager[802]: Activation (wlan2) Stage 2 of 5 (Device Configure) complete. Oct 5 03:31:09 taoseeker NetworkManager[802]: Activation (wlan2) Stage 1 of 5 (Device Prepare) scheduled... Oct 5 03:31:09 taoseeker NetworkManager[802]: Activation (wlan2) Stage 1 of 5 (Device Prepare) started... Oct 5 03:31:09 taoseeker NetworkManager[802]: (wlan2): device state change: need-auth -> prepare (reason 'none') [60 40 0] Oct 5 03:31:09 taoseeker NetworkManager[802]: Activation (wlan2) Stage 2 of 5 (Device Configure) scheduled... Oct 5 03:31:09 taoseeker NetworkManager[802]: Activation (wlan2) Stage 1 of 5 (Device Prepare) complete. Oct 5 03:31:09 taoseeker NetworkManager[802]: Activation (wlan2) Stage 2 of 5 (Device Configure) starting... Oct 5 03:31:09 taoseeker NetworkManager[802]: (wlan2): device state change: prepare -> config (reason 'none') [40 50 0] Oct 5 03:31:09 taoseeker NetworkManager[802]: Activation (wlan2/wireless): connection 'Telenor6904ett' has security, and secrets exist. No new secrets needed. Oct 5 03:31:09 taoseeker NetworkManager[802]: Config: added 'ssid' value 'Telenor6904ett' Oct 5 03:31:09 taoseeker NetworkManager[802]: Config: added 'scan_ssid' value '1' Oct 5 03:31:09 taoseeker NetworkManager[802]: Config: added 'key_mgmt' value 'WPA-PSK' Oct 5 03:31:09 taoseeker NetworkManager[802]: Config: added 'auth_alg' value 'OPEN' Oct 5 03:31:09 taoseeker NetworkManager[802]: Config: added 'psk' value '' Oct 5 03:31:09 taoseeker NetworkManager[802]: Activation (wlan2) Stage 2 of 5 (Device Configure) complete. Oct 5 03:31:09 taoseeker NetworkManager[802]: Config: set interface ap_scan to 1 Oct 5 03:31:09 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 03:31:10 taoseeker wpa_supplicant[987]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 03:31:10 taoseeker kernel: [ 120.268267] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 03:31:10 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 03:31:10 taoseeker kernel: [ 120.279378] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 03:31:10 taoseeker kernel: [ 120.482920] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 03:31:10 taoseeker kernel: [ 120.686811] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 03:31:10 taoseeker kernel: [ 120.890750] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 03:31:10 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 03:31:11 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 03:31:18 taoseeker wpa_supplicant[987]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 03:31:18 taoseeker kernel: [ 128.348080] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 03:31:18 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 03:31:18 taoseeker kernel: [ 128.359348] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 03:31:18 taoseeker kernel: [ 128.562777] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 03:31:18 taoseeker kernel: [ 128.766673] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 03:31:18 taoseeker kernel: [ 128.970570] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 03:31:18 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 03:31:19 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 03:31:20 taoseeker wpa_supplicant[987]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 03:31:20 taoseeker kernel: [ 130.243083] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 03:31:20 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 03:31:20 taoseeker kernel: [ 130.254272] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 03:31:20 taoseeker kernel: [ 130.457802] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 03:31:20 taoseeker kernel: [ 130.661695] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 03:31:20 taoseeker kernel: [ 130.865588] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 03:31:20 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 03:31:21 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 03:31:22 taoseeker wpa_supplicant[987]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 03:31:22 taoseeker kernel: [ 132.162160] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 03:31:22 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 03:31:22 taoseeker kernel: [ 132.173392] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 03:31:22 taoseeker kernel: [ 132.376815] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 03:31:22 taoseeker kernel: [ 132.580712] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 03:31:22 taoseeker kernel: [ 132.784606] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 03:31:22 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 03:31:22 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 03:31:24 taoseeker wpa_supplicant[987]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 03:31:24 taoseeker kernel: [ 134.049145] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 03:31:24 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 03:31:24 taoseeker kernel: [ 134.076113] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 03:31:24 taoseeker kernel: [ 134.279841] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 03:31:24 taoseeker kernel: [ 134.483736] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 03:31:24 taoseeker kernel: [ 134.687629] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 03:31:24 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 03:31:24 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 03:31:25 taoseeker wpa_supplicant[987]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 03:31:25 taoseeker kernel: [ 135.952175] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 03:31:25 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 03:31:25 taoseeker kernel: [ 135.963380] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 03:31:26 taoseeker kernel: [ 136.166874] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 03:31:26 taoseeker kernel: [ 136.370768] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 03:31:26 taoseeker kernel: [ 136.574660] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 03:31:26 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 03:31:26 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 03:31:27 taoseeker wpa_supplicant[987]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 03:31:27 taoseeker kernel: [ 137.831255] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 03:31:27 taoseeker kernel: [ 137.842373] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 03:31:27 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 03:31:28 taoseeker kernel: [ 138.045916] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 03:31:28 taoseeker kernel: [ 138.249812] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 03:31:28 taoseeker kernel: [ 138.453700] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 03:31:28 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 03:31:28 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 03:31:29 taoseeker wpa_supplicant[987]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 03:31:29 taoseeker kernel: [ 139.726275] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 03:31:29 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 03:31:29 taoseeker kernel: [ 139.737437] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 03:31:29 taoseeker kernel: [ 139.940943] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 03:31:30 taoseeker kernel: [ 140.144897] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 03:31:30 taoseeker kernel: [ 140.348764] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 03:31:30 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 03:31:30 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 03:31:31 taoseeker wpa_supplicant[987]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 03:31:31 taoseeker kernel: [ 141.615850] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 03:31:31 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 03:31:31 taoseeker kernel: [ 141.632294] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 03:31:31 taoseeker kernel: [ 141.835966] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 03:31:32 taoseeker kernel: [ 142.039864] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 03:31:32 taoseeker kernel: [ 142.243756] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 03:31:32 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 03:31:32 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 03:31:33 taoseeker wpa_supplicant[987]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 03:31:33 taoseeker kernel: [ 143.516307] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 03:31:33 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 03:31:33 taoseeker kernel: [ 143.527469] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 03:31:33 taoseeker kernel: [ 143.730995] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 03:31:33 taoseeker kernel: [ 143.934892] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 03:31:34 taoseeker NetworkManager[802]: Activation (wlan2/wireless): association took too long. Oct 5 03:31:34 taoseeker NetworkManager[802]: (wlan2): device state change: config -> need-auth (reason 'none') [50 60 0] Oct 5 03:31:34 taoseeker NetworkManager[802]: Activation (wlan2/wireless): asking for new secrets Oct 5 03:31:34 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 03:31:34 taoseeker NetworkManager[802]: Couldn't disconnect supplicant interface: This interface is not connected. Oct 5 03:31:34 taoseeker kernel: [ 144.138830] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 03:31:46 taoseeker NetworkManager[802]: No agents were available for this request. Oct 5 03:31:46 taoseeker NetworkManager[802]: (wlan2): device state change: need-auth -> failed (reason 'no-secrets') [60 120 7] Oct 5 03:31:46 taoseeker NetworkManager[802]: Marking connection 'Telenor6904ett' invalid. Oct 5 03:31:46 taoseeker NetworkManager[802]: Activation (wlan2) failed for connection 'Telenor6904ett' Oct 5 03:31:46 taoseeker NetworkManager[802]: (wlan2): device state change: failed -> disconnected (reason 'none') [120 30 0] Oct 5 03:31:46 taoseeker NetworkManager[802]: (wlan2): deactivating device (reason 'none') [0] Oct 5 03:31:54 taoseeker NetworkManager[802]: Activation (wlan2) starting connection 'Telenor6904ett' Oct 5 03:31:54 taoseeker NetworkManager[802]: (wlan2): device state change: disconnected -> prepare (reason 'none') [30 40 0] Oct 5 03:31:54 taoseeker NetworkManager[802]: Activation (wlan2) Stage 1 of 5 (Device Prepare) scheduled... Oct 5 03:31:54 taoseeker NetworkManager[802]: Activation (wlan2) Stage 1 of 5 (Device Prepare) started... Oct 5 03:31:54 taoseeker NetworkManager[802]: Activation (wlan2) Stage 2 of 5 (Device Configure) scheduled... Oct 5 03:31:54 taoseeker NetworkManager[802]: Activation (wlan2) Stage 1 of 5 (Device Prepare) complete. Oct 5 03:31:54 taoseeker NetworkManager[802]: Activation (wlan2) Stage 2 of 5 (Device Configure) starting... Oct 5 03:31:54 taoseeker NetworkManager[802]: (wlan2): device state change: prepare -> config (reason 'none') [40 50 0] Oct 5 03:31:54 taoseeker NetworkManager[802]: Activation (wlan2/wireless): access point 'Telenor6904ett' has security, but secrets are required. Oct 5 03:31:54 taoseeker NetworkManager[802]: (wlan2): device state change: config -> need-auth (reason 'none') [50 60 0] Oct 5 03:31:54 taoseeker NetworkManager[802]: Activation (wlan2) Stage 2 of 5 (Device Configure) complete. Oct 5 03:31:54 taoseeker NetworkManager[802]: Activation (wlan2) Stage 1 of 5 (Device Prepare) scheduled... Oct 5 03:31:54 taoseeker NetworkManager[802]: Activation (wlan2) Stage 1 of 5 (Device Prepare) started... Oct 5 03:31:54 taoseeker NetworkManager[802]: (wlan2): device state change: need-auth -> prepare (reason 'none') [60 40 0] Oct 5 03:31:54 taoseeker NetworkManager[802]: Activation (wlan2) Stage 2 of 5 (Device Configure) scheduled... Oct 5 03:31:54 taoseeker NetworkManager[802]: Activation (wlan2) Stage 1 of 5 (Device Prepare) complete. Oct 5 03:31:54 taoseeker NetworkManager[802]: Activation (wlan2) Stage 2 of 5 (Device Configure) starting... Oct 5 03:31:54 taoseeker NetworkManager[802]: (wlan2): device state change: prepare -> config (reason 'none') [40 50 0] Oct 5 03:31:54 taoseeker NetworkManager[802]: Activation (wlan2/wireless): connection 'Telenor6904ett' has security, and secrets exist. No new secrets needed. Oct 5 03:31:54 taoseeker NetworkManager[802]: Config: added 'ssid' value 'Telenor6904ett' Oct 5 03:31:54 taoseeker NetworkManager[802]: Config: added 'scan_ssid' value '1' Oct 5 03:31:54 taoseeker NetworkManager[802]: Config: added 'key_mgmt' value 'WPA-PSK' Oct 5 03:31:54 taoseeker NetworkManager[802]: Config: added 'auth_alg' value 'OPEN' Oct 5 03:31:54 taoseeker NetworkManager[802]: Config: added 'psk' value '' Oct 5 03:31:54 taoseeker NetworkManager[802]: Activation (wlan2) Stage 2 of 5 (Device Configure) complete. Oct 5 03:31:54 taoseeker NetworkManager[802]: Config: set interface ap_scan to 1 Oct 5 03:31:54 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 03:31:55 taoseeker wpa_supplicant[987]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 03:31:55 taoseeker kernel: [ 165.592998] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 03:31:55 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 03:31:55 taoseeker kernel: [ 165.611957] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 03:31:55 taoseeker kernel: [ 165.815670] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 03:31:55 taoseeker wpa_supplicant[987]: wlan2: Trying to associate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 03:31:55 taoseeker kernel: [ 165.842787] wlan2: authenticated Oct 5 03:31:55 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: authenticating -> associating Oct 5 03:31:55 taoseeker kernel: [ 165.851712] wlan2: associating with AP with corrupt beacon Oct 5 03:31:55 taoseeker kernel: [ 165.855701] wlan2: associate with 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 03:31:55 taoseeker kernel: [ 165.884853] wlan2: RX AssocResp from 50:67:f0:d3:ed:c4 (capab=0xc11 status=0 aid=1) Oct 5 03:31:55 taoseeker kernel: [ 165.885578] wlan2: associated Oct 5 03:31:55 taoseeker kernel: [ 165.886158] IPv6: ADDRCONF(NETDEV_CHANGE): wlan2: link becomes ready Oct 5 03:31:55 taoseeker wpa_supplicant[987]: wlan2: Associated with 50:67:f0:d3:ed:c4 Oct 5 03:31:55 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: associating -> associated Oct 5 03:31:56 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: associated -> 4-way handshake Oct 5 03:31:56 taoseeker wpa_supplicant[987]: wlan2: WPA: Key negotiation completed with 50:67:f0:d3:ed:c4 [PTK=CCMP GTK=CCMP] Oct 5 03:31:56 taoseeker wpa_supplicant[987]: wlan2: CTRL-EVENT-CONNECTED - Connection to 50:67:f0:d3:ed:c4 completed (reauth) [id=0 id_str=] Oct 5 03:31:56 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: 4-way handshake -> completed Oct 5 03:31:56 taoseeker NetworkManager[802]: Activation (wlan2/wireless) Stage 2 of 5 (Device Configure) successful. Connected to wireless network 'Telenor6904ett'. Oct 5 03:31:56 taoseeker NetworkManager[802]: Activation (wlan2) Stage 3 of 5 (IP Configure Start) scheduled. Oct 5 03:31:56 taoseeker NetworkManager[802]: Activation (wlan2) Stage 3 of 5 (IP Configure Start) started... Oct 5 03:31:56 taoseeker NetworkManager[802]: (wlan2): device state change: config -> ip-config (reason 'none') [50 70 0] Oct 5 03:31:56 taoseeker NetworkManager[802]: Activation (wlan2) Beginning DHCPv4 transaction (timeout in 45 seconds) Oct 5 03:31:56 taoseeker NetworkManager[802]: dhclient started with pid 1551 Oct 5 03:31:56 taoseeker NetworkManager[802]: Activation (wlan2) Beginning IP6 addrconf. Oct 5 03:31:56 taoseeker NetworkManager[802]: Activation (wlan2) Stage 3 of 5 (IP Configure Start) complete. Oct 5 03:31:56 taoseeker dhclient: Internet Systems Consortium DHCP Client 4.2.4 Oct 5 03:31:56 taoseeker dhclient: Copyright 2004-2012 Internet Systems Consortium. Oct 5 03:31:56 taoseeker dhclient: All rights reserved. Oct 5 03:31:56 taoseeker dhclient: For info, please visit https://www.isc.org/software/dhcp/ Oct 5 03:31:56 taoseeker dhclient: Oct 5 03:31:56 taoseeker dhclient: Listening on LPF/wlan2/00:14:51:81:6a:17 Oct 5 03:31:56 taoseeker dhclient: Sending on LPF/wlan2/00:14:51:81:6a:17 Oct 5 03:31:56 taoseeker NetworkManager[802]: (wlan2): DHCPv4 state changed nbi -> preinit Oct 5 03:31:56 taoseeker dhclient: Sending on Socket/fallback Oct 5 03:31:56 taoseeker dhclient: DHCPREQUEST of 10.0.0.66 on wlan2 to 255.255.255.255 port 67 Oct 5 03:31:56 taoseeker dhclient: DHCPACK of 10.0.0.66 from 10.0.0.138 Oct 5 03:31:56 taoseeker dhclient: bound to 10.0.0.66 -- renewal in 38482 seconds. Oct 5 03:31:56 taoseeker NetworkManager[802]: (wlan2): DHCPv4 state changed preinit -> reboot Oct 5 03:31:56 taoseeker NetworkManager[802]: address 10.0.0.66 Oct 5 03:31:56 taoseeker NetworkManager[802]: prefix 24 (255.255.255.0) Oct 5 03:31:56 taoseeker NetworkManager[802]: gateway 10.0.0.138 Oct 5 03:31:56 taoseeker NetworkManager[802]: hostname 'taoseeker' Oct 5 03:31:56 taoseeker NetworkManager[802]: nameserver '130.67.15.198' Oct 5 03:31:56 taoseeker NetworkManager[802]: nameserver '193.213.112.4' Oct 5 03:31:56 taoseeker NetworkManager[802]: nameserver '10.0.0.138' Oct 5 03:31:56 taoseeker NetworkManager[802]: domain name 'lan' Oct 5 03:31:56 taoseeker NetworkManager[802]: Activation (wlan2) Stage 5 of 5 (IPv4 Configure Commit) scheduled... Oct 5 03:31:56 taoseeker NetworkManager[802]: Activation (wlan2) Stage 5 of 5 (IPv4 Commit) started... Oct 5 03:31:57 taoseeker NetworkManager[802]: (wlan2): device state change: ip-config -> activated (reason 'none') [70 100 0] Oct 5 03:31:57 taoseeker NetworkManager[802]: ((null)): writing resolv.conf to /sbin/resolvconf Oct 5 03:31:58 taoseeker NetworkManager[802]: Policy set 'Telenor6904ett' (wlan2) as default for IPv4 routing and DNS. Oct 5 03:31:58 taoseeker NetworkManager[802]: Activation (wlan2) successful, device activated. Oct 5 03:31:58 taoseeker NetworkManager[802]: Activation (wlan2) Stage 5 of 5 (IPv4 Commit) complete. Oct 5 03:32:12 taoseeker kernel: [ 182.176647] wlan2: deauthenticated from 50:67:f0:d3:ed:c4 (Reason: 3) Oct 5 03:32:12 taoseeker wpa_supplicant[987]: wlan2: CTRL-EVENT-DISCONNECTED bssid=50:67:f0:d3:ed:c4 reason=3 Oct 5 03:32:12 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: completed -> disconnected Oct 5 03:32:12 taoseeker kernel: [ 182.186132] cfg80211: All devices are disconnected, going to restore regulatory settings Oct 5 03:32:12 taoseeker kernel: [ 182.186152] cfg80211: Restoring regulatory settings Oct 5 03:32:12 taoseeker kernel: [ 182.186167] cfg80211: Calling CRDA to update world regulatory domain Oct 5 03:32:12 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 03:32:13 taoseeker wpa_supplicant[987]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 03:32:13 taoseeker kernel: [ 183.455806] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 03:32:13 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 03:32:13 taoseeker kernel: [ 183.467075] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 03:32:13 taoseeker kernel: [ 183.670513] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 03:32:13 taoseeker kernel: [ 183.874409] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 03:32:13 taoseeker kernel: [ 183.878444] wlan2: authenticated Oct 5 03:32:13 taoseeker wpa_supplicant[987]: wlan2: Trying to associate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 03:32:13 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: authenticating -> associating Oct 5 03:32:13 taoseeker kernel: [ 183.886484] wlan2: associating with AP with corrupt beacon Oct 5 03:32:13 taoseeker kernel: [ 183.890458] wlan2: associate with 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 03:32:14 taoseeker kernel: [ 184.094300] wlan2: associate with 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 03:32:14 taoseeker kernel: [ 184.098238] wlan2: RX AssocResp from 50:67:f0:d3:ed:c4 (capab=0xc11 status=0 aid=1) Oct 5 03:32:14 taoseeker kernel: [ 184.098835] wlan2: associated Oct 5 03:32:14 taoseeker wpa_supplicant[987]: wlan2: Associated with 50:67:f0:d3:ed:c4 Oct 5 03:32:14 taoseeker kernel: [ 184.099964] cfg80211: Pending regulatory request, waiting for it to be processed... Oct 5 03:32:14 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: associating -> associated Oct 5 03:32:15 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: associated -> 4-way handshake Oct 5 03:32:15 taoseeker wpa_supplicant[987]: wlan2: WPA: Key negotiation completed with 50:67:f0:d3:ed:c4 [PTK=CCMP GTK=CCMP] Oct 5 03:32:15 taoseeker wpa_supplicant[987]: wlan2: CTRL-EVENT-CONNECTED - Connection to 50:67:f0:d3:ed:c4 completed (reauth) [id=0 id_str=] Oct 5 03:32:15 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: 4-way handshake -> completed Oct 5 03:32:17 taoseeker NetworkManager[802]: (wlan2): IP6 addrconf timed out or failed. Oct 5 03:32:17 taoseeker NetworkManager[802]: Activation (wlan2) Stage 4 of 5 (IPv6 Configure Timeout) scheduled... Oct 5 03:32:17 taoseeker NetworkManager[802]: Activation (wlan2) Stage 4 of 5 (IPv6 Configure Timeout) started... Oct 5 03:32:17 taoseeker NetworkManager[802]: Activation (wlan2) Stage 4 of 5 (IPv6 Configure Timeout) complete. Oct 5 03:32:20 taoseeker wpa_supplicant[987]: wlan2: CTRL-EVENT-DISCONNECTED bssid=50:67:f0:d3:ed:c4 reason=4 Oct 5 03:32:20 taoseeker kernel: [ 190.263157] ieee80211 phy0: >wlan2: No probe response from AP 50:67:f0:d3:ed:c4 after 500ms, disconnecting. Oct 5 03:32:20 taoseeker kernel: [ 190.265479] cfg80211: All devices are disconnected, going to restore regulatory settings Oct 5 03:32:20 taoseeker kernel: [ 190.265494] cfg80211: Restoring regulatory settings Oct 5 03:32:20 taoseeker kernel: [ 190.265507] cfg80211: Calling CRDA to update world regulatory domain Oct 5 03:32:20 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: completed -> disconnected Oct 5 03:32:20 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 03:32:21 taoseeker wpa_supplicant[987]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 03:32:21 taoseeker kernel: [ 191.551659] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 03:32:21 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 03:32:21 taoseeker kernel: [ 191.562910] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 03:32:21 taoseeker kernel: [ 191.565522] wlan2: authenticated Oct 5 03:32:21 taoseeker wpa_supplicant[987]: wlan2: Trying to associate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 03:32:21 taoseeker kernel: [ 191.569300] wlan2: associating with AP with corrupt beacon Oct 5 03:32:21 taoseeker kernel: [ 191.570530] wlan2: associate with 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 03:32:21 taoseeker kernel: [ 191.572965] wlan2: RX AssocResp from 50:67:f0:d3:ed:c4 (capab=0xc11 status=0 aid=1) Oct 5 03:32:21 taoseeker kernel: [ 191.573472] wlan2: associated Oct 5 03:32:21 taoseeker kernel: [ 191.574107] cfg80211: Pending regulatory request, waiting for it to be processed... Oct 5 03:32:21 taoseeker wpa_supplicant[987]: wlan2: Associated with 50:67:f0:d3:ed:c4 Oct 5 03:32:21 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: authenticating -> associating Oct 5 03:32:21 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: associating -> associated Oct 5 03:32:22 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: associated -> 4-way handshake Oct 5 03:32:22 taoseeker wpa_supplicant[987]: wlan2: WPA: Key negotiation completed with 50:67:f0:d3:ed:c4 [PTK=CCMP GTK=CCMP] Oct 5 03:32:22 taoseeker wpa_supplicant[987]: wlan2: CTRL-EVENT-CONNECTED - Connection to 50:67:f0:d3:ed:c4 completed (reauth) [id=0 id_str=] Oct 5 03:32:22 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: 4-way handshake -> completed Oct 5 03:32:40 taoseeker kernel: [ 210.182693] wlan2: deauthenticated from 50:67:f0:d3:ed:c4 (Reason: 3) Oct 5 03:32:40 taoseeker kernel: [ 210.183950] cfg80211: All devices are disconnected, going to restore regulatory settings Oct 5 03:32:40 taoseeker kernel: [ 210.183963] cfg80211: Restoring regulatory settings Oct 5 03:32:40 taoseeker kernel: [ 210.183976] cfg80211: Calling CRDA for country: NO Oct 5 03:32:40 taoseeker wpa_supplicant[987]: wlan2: CTRL-EVENT-DISCONNECTED bssid=50:67:f0:d3:ed:c4 reason=3 Oct 5 03:32:40 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: completed -> disconnected Oct 5 03:32:40 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 03:32:41 taoseeker wpa_supplicant[987]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 03:32:41 taoseeker kernel: [ 211.443237] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 03:32:41 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 03:32:41 taoseeker kernel: [ 211.452633] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 03:32:41 taoseeker kernel: [ 211.455050] wlan2: authenticated Oct 5 03:32:41 taoseeker wpa_supplicant[987]: wlan2: Trying to associate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 03:32:41 taoseeker kernel: [ 211.458801] wlan2: associating with AP with corrupt beacon Oct 5 03:32:41 taoseeker kernel: [ 211.460619] wlan2: associate with 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 03:32:41 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: authenticating -> associating Oct 5 03:32:41 taoseeker wpa_supplicant[987]: wlan2: Associated with 50:67:f0:d3:ed:c4 Oct 5 03:32:41 taoseeker kernel: [ 211.464631] wlan2: RX AssocResp from 50:67:f0:d3:ed:c4 (capab=0xc11 status=0 aid=1) Oct 5 03:32:41 taoseeker kernel: [ 211.465125] wlan2: associated Oct 5 03:32:41 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: associating -> associated Oct 5 03:32:42 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: associated -> 4-way handshake Oct 5 03:32:43 taoseeker wpa_supplicant[987]: wlan2: WPA: Key negotiation completed with 50:67:f0:d3:ed:c4 [PTK=CCMP GTK=CCMP] Oct 5 03:32:43 taoseeker wpa_supplicant[987]: wlan2: CTRL-EVENT-CONNECTED - Connection to 50:67:f0:d3:ed:c4 completed (reauth) [id=0 id_str=] Oct 5 03:32:43 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: 4-way handshake -> completed Oct 5 03:32:48 taoseeker wpa_supplicant[987]: wlan2: CTRL-EVENT-DISCONNECTED bssid=50:67:f0:d3:ed:c4 reason=4 Oct 5 03:32:48 taoseeker kernel: [ 218.249161] ieee80211 phy0: >wlan2: No probe response from AP 50:67:f0:d3:ed:c4 after 500ms, disconnecting. Oct 5 03:32:48 taoseeker kernel: [ 218.251228] cfg80211: All devices are disconnected, going to restore regulatory settings Oct 5 03:32:48 taoseeker kernel: [ 218.251243] cfg80211: Restoring regulatory settings Oct 5 03:32:48 taoseeker kernel: [ 218.251256] cfg80211: Calling CRDA to update world regulatory domain Oct 5 03:32:48 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: completed -> disconnected Oct 5 03:32:48 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 03:32:49 taoseeker wpa_supplicant[987]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 03:32:49 taoseeker kernel: [ 219.507161] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 03:32:49 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 03:32:49 taoseeker kernel: [ 219.516533] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 03:32:49 taoseeker kernel: [ 219.518855] wlan2: authenticated Oct 5 03:32:49 taoseeker wpa_supplicant[987]: wlan2: Trying to associate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 03:32:49 taoseeker kernel: [ 219.524705] wlan2: associating with AP with corrupt beacon Oct 5 03:32:49 taoseeker kernel: [ 219.528302] wlan2: associate with 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 03:32:49 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: authenticating -> associating Oct 5 03:32:49 taoseeker wpa_supplicant[987]: wlan2: Associated with 50:67:f0:d3:ed:c4 Oct 5 03:32:49 taoseeker kernel: [ 219.532948] wlan2: RX AssocResp from 50:67:f0:d3:ed:c4 (capab=0xc11 status=0 aid=1) Oct 5 03:32:49 taoseeker kernel: [ 219.533470] wlan2: associated Oct 5 03:32:49 taoseeker kernel: [ 219.534111] cfg80211: Pending regulatory request, waiting for it to be processed... Oct 5 03:32:49 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: associating -> associated Oct 5 03:32:50 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: associated -> 4-way handshake Oct 5 03:32:51 taoseeker wpa_supplicant[987]: wlan2: WPA: Key negotiation completed with 50:67:f0:d3:ed:c4 [PTK=CCMP GTK=CCMP] Oct 5 03:32:51 taoseeker wpa_supplicant[987]: wlan2: CTRL-EVENT-CONNECTED - Connection to 50:67:f0:d3:ed:c4 completed (reauth) [id=0 id_str=] Oct 5 03:32:51 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: 4-way handshake -> completed Oct 5 03:32:54 taoseeker wpa_supplicant[987]: wlan2: CTRL-EVENT-DISCONNECTED bssid=50:67:f0:d3:ed:c4 reason=15 Oct 5 03:32:54 taoseeker kernel: [ 224.176288] wlan2: deauthenticated from 50:67:f0:d3:ed:c4 (Reason: 15) Oct 5 03:32:54 taoseeker kernel: [ 224.178485] cfg80211: All devices are disconnected, going to restore regulatory settings Oct 5 03:32:54 taoseeker kernel: [ 224.178498] cfg80211: Restoring regulatory settings Oct 5 03:32:54 taoseeker kernel: [ 224.178512] cfg80211: Calling CRDA for country: NO Oct 5 03:32:54 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: completed -> disconnected Oct 5 03:32:54 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 03:32:55 taoseeker wpa_supplicant[987]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 03:32:55 taoseeker kernel: [ 225.442258] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 03:32:55 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 03:32:55 taoseeker kernel: [ 225.453455] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 03:32:55 taoseeker wpa_supplicant[987]: wlan2: Trying to associate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 03:32:55 taoseeker kernel: [ 225.457920] wlan2: authenticated Oct 5 03:32:55 taoseeker kernel: [ 225.459274] wlan2: associating with AP with corrupt beacon Oct 5 03:32:55 taoseeker kernel: [ 225.461154] wlan2: associate with 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 03:32:55 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: authenticating -> associating Oct 5 03:32:55 taoseeker kernel: [ 225.665037] wlan2: associate with 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 03:32:55 taoseeker kernel: [ 225.668955] wlan2: RX AssocResp from 50:67:f0:d3:ed:c4 (capab=0xc11 status=0 aid=1) Oct 5 03:32:55 taoseeker kernel: [ 225.669538] wlan2: associated Oct 5 03:32:55 taoseeker wpa_supplicant[987]: wlan2: Associated with 50:67:f0:d3:ed:c4 Oct 5 03:32:55 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: associating -> associated Oct 5 03:32:56 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: associated -> 4-way handshake Oct 5 03:32:57 taoseeker wpa_supplicant[987]: wlan2: WPA: Key negotiation completed with 50:67:f0:d3:ed:c4 [PTK=CCMP GTK=CCMP] Oct 5 03:32:57 taoseeker wpa_supplicant[987]: wlan2: CTRL-EVENT-CONNECTED - Connection to 50:67:f0:d3:ed:c4 completed (reauth) [id=0 id_str=] Oct 5 03:32:57 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: 4-way handshake -> completed Oct 5 03:33:00 taoseeker kernel: [ 230.225400] wlan2: deauthenticated from 50:67:f0:d3:ed:c4 (Reason: 15) Oct 5 03:33:00 taoseeker wpa_supplicant[987]: wlan2: CTRL-EVENT-DISCONNECTED bssid=50:67:f0:d3:ed:c4 reason=15 Oct 5 03:33:00 taoseeker kernel: [ 230.228006] cfg80211: All devices are disconnected, going to restore regulatory settings Oct 5 03:33:00 taoseeker kernel: [ 230.228022] cfg80211: Restoring regulatory settings Oct 5 03:33:00 taoseeker kernel: [ 230.228035] cfg80211: Calling CRDA to update world regulatory domain Oct 5 03:33:00 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: completed -> disconnected Oct 5 03:33:00 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 03:33:01 taoseeker wpa_supplicant[987]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 03:33:01 taoseeker kernel: [ 231.483157] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 03:33:01 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 03:33:01 taoseeker kernel: [ 231.494346] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 03:33:01 taoseeker kernel: [ 231.697881] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 03:33:01 taoseeker kernel: [ 231.901780] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 03:33:02 taoseeker kernel: [ 232.105666] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 03:33:02 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 03:33:02 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 03:33:03 taoseeker wpa_supplicant[987]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 03:33:03 taoseeker kernel: [ 233.394169] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 03:33:03 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 03:33:03 taoseeker kernel: [ 233.405361] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 03:33:03 taoseeker kernel: [ 233.608904] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 03:33:03 taoseeker kernel: [ 233.812795] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 03:33:04 taoseeker kernel: [ 234.016691] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 03:33:04 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 03:33:04 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 03:33:05 taoseeker wpa_supplicant[987]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 03:33:05 taoseeker kernel: [ 235.297539] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 03:33:05 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 03:33:05 taoseeker kernel: [ 235.308397] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 03:33:05 taoseeker kernel: [ 235.311052] wlan2: authenticated Oct 5 03:33:05 taoseeker wpa_supplicant[987]: wlan2: Trying to associate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 03:33:05 taoseeker kernel: [ 235.314684] wlan2: associating with AP with corrupt beacon Oct 5 03:33:05 taoseeker kernel: [ 235.316077] wlan2: associate with 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 03:33:05 taoseeker kernel: [ 235.318643] wlan2: RX AssocResp from 50:67:f0:d3:ed:c4 (capab=0xc11 status=0 aid=1) Oct 5 03:33:05 taoseeker kernel: [ 235.319130] wlan2: associated Oct 5 03:33:05 taoseeker kernel: [ 235.319799] cfg80211: Pending regulatory request, waiting for it to be processed... Oct 5 03:33:05 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: authenticating -> associating Oct 5 03:33:05 taoseeker wpa_supplicant[987]: wlan2: Associated with 50:67:f0:d3:ed:c4 Oct 5 03:33:05 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: associating -> associated Oct 5 03:33:06 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: associated -> 4-way handshake Oct 5 03:33:06 taoseeker wpa_supplicant[987]: wlan2: WPA: Key negotiation completed with 50:67:f0:d3:ed:c4 [PTK=CCMP GTK=CCMP] Oct 5 03:33:06 taoseeker wpa_supplicant[987]: wlan2: CTRL-EVENT-CONNECTED - Connection to 50:67:f0:d3:ed:c4 completed (reauth) [id=0 id_str=] Oct 5 03:33:06 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: 4-way handshake -> completed Oct 5 03:33:11 taoseeker kernel: [ 241.237035] ieee80211 phy0: >wlan2: No probe response from AP 50:67:f0:d3:ed:c4 after 500ms, disconnecting. Oct 5 03:33:11 taoseeker wpa_supplicant[987]: wlan2: CTRL-EVENT-DISCONNECTED bssid=50:67:f0:d3:ed:c4 reason=4 Oct 5 03:33:11 taoseeker kernel: [ 241.246816] cfg80211: All devices are disconnected, going to restore regulatory settings Oct 5 03:33:11 taoseeker kernel: [ 241.246833] cfg80211: Restoring regulatory settings Oct 5 03:33:11 taoseeker kernel: [ 241.246846] cfg80211: Calling CRDA to update world regulatory domain Oct 5 03:33:11 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: completed -> disconnected Oct 5 03:33:11 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 03:33:12 taoseeker wpa_supplicant[987]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 03:33:12 taoseeker kernel: [ 242.533533] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 03:33:12 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 03:33:12 taoseeker kernel: [ 242.560485] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 03:33:12 taoseeker kernel: [ 242.764214] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 03:33:13 taoseeker kernel: [ 242.968124] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 03:33:13 taoseeker kernel: [ 243.171998] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 03:33:13 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 03:33:13 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 03:33:14 taoseeker wpa_supplicant[987]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 03:33:14 taoseeker kernel: [ 244.493269] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 03:33:14 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 03:33:14 taoseeker kernel: [ 244.503726] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 03:33:14 taoseeker kernel: [ 244.707215] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 03:33:14 taoseeker kernel: [ 244.911109] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 03:33:15 taoseeker kernel: [ 245.114998] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 03:33:15 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 03:33:15 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 03:33:16 taoseeker wpa_supplicant[987]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 03:33:16 taoseeker kernel: [ 246.451596] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 03:33:16 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 03:33:16 taoseeker kernel: [ 246.478556] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 03:33:16 taoseeker kernel: [ 246.682204] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 03:33:16 taoseeker kernel: [ 246.886100] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 03:33:17 taoseeker kernel: [ 247.090009] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 03:33:17 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 03:33:17 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 03:33:24 taoseeker wpa_supplicant[987]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 03:33:24 taoseeker kernel: [ 254.623400] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 03:33:24 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 03:33:24 taoseeker kernel: [ 254.634558] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 03:33:24 taoseeker kernel: [ 254.838080] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 03:33:25 taoseeker kernel: [ 255.042048] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 03:33:25 taoseeker kernel: [ 255.245861] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 03:33:25 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 03:33:25 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 03:33:26 taoseeker wpa_supplicant[987]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 03:33:26 taoseeker kernel: [ 256.560473] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 03:33:26 taoseeker kernel: [ 256.579907] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 03:33:26 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 03:33:26 taoseeker kernel: [ 256.781350] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 03:33:27 taoseeker NetworkManager[802]: (wlan2): link timed out. Oct 5 03:33:27 taoseeker NetworkManager[802]: (wlan2): device state change: activated -> failed (reason 'supplicant-timeout') [100 120 11] Oct 5 03:33:27 taoseeker kernel: [ 256.984921] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 03:33:27 taoseeker NetworkManager[802]: Activation (wlan2) failed for connection 'Telenor6904ett' Oct 5 03:33:27 taoseeker NetworkManager[802]: (wlan2): device state change: failed -> disconnected (reason 'none') [120 30 0] Oct 5 03:33:27 taoseeker NetworkManager[802]: (wlan2): deactivating device (reason 'none') [0] Oct 5 03:33:27 taoseeker NetworkManager[802]: (wlan2): canceled DHCP transaction, DHCP client pid 1551 Oct 5 03:33:27 taoseeker kernel: [ 257.129767] IPv6: ADDRCONF(NETDEV_UP): wlan2: link is not ready Oct 5 03:33:27 taoseeker NetworkManager[802]: DNS: plugin dnsmasq update failed Oct 5 03:33:27 taoseeker NetworkManager[802]: ((null)): removing resolv.conf from /sbin/resolvconf Oct 5 03:33:27 taoseeker kernel: [ 257.188911] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 03:33:27 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 03:33:30 taoseeker NetworkManager[802]: Auto-activating connection 'Telenor6904ett'. Oct 5 03:33:30 taoseeker NetworkManager[802]: Activation (wlan2) starting connection 'Telenor6904ett' Oct 5 03:33:30 taoseeker NetworkManager[802]: (wlan2): device state change: disconnected -> prepare (reason 'none') [30 40 0] Oct 5 03:33:30 taoseeker NetworkManager[802]: Activation (wlan2) Stage 1 of 5 (Device Prepare) scheduled... Oct 5 03:33:30 taoseeker NetworkManager[802]: Activation (wlan2) Stage 1 of 5 (Device Prepare) started... Oct 5 03:33:30 taoseeker NetworkManager[802]: Activation (wlan2) Stage 2 of 5 (Device Configure) scheduled... Oct 5 03:33:30 taoseeker NetworkManager[802]: Activation (wlan2) Stage 1 of 5 (Device Prepare) complete. Oct 5 03:33:30 taoseeker NetworkManager[802]: Activation (wlan2) Stage 2 of 5 (Device Configure) starting... Oct 5 03:33:30 taoseeker NetworkManager[802]: (wlan2): device state change: prepare -> config (reason 'none') [40 50 0] Oct 5 03:33:30 taoseeker NetworkManager[802]: Activation (wlan2/wireless): access point 'Telenor6904ett' has security, but secrets are required. Oct 5 03:33:30 taoseeker NetworkManager[802]: (wlan2): device state change: config -> need-auth (reason 'none') [50 60 0] Oct 5 03:33:30 taoseeker NetworkManager[802]: Activation (wlan2) Stage 2 of 5 (Device Configure) complete. Oct 5 03:33:30 taoseeker NetworkManager[802]: Activation (wlan2) Stage 1 of 5 (Device Prepare) scheduled... Oct 5 03:33:30 taoseeker NetworkManager[802]: Activation (wlan2) Stage 1 of 5 (Device Prepare) started... Oct 5 03:33:30 taoseeker NetworkManager[802]: (wlan2): device state change: need-auth -> prepare (reason 'none') [60 40 0] Oct 5 03:33:30 taoseeker NetworkManager[802]: Activation (wlan2) Stage 2 of 5 (Device Configure) scheduled... Oct 5 03:33:30 taoseeker NetworkManager[802]: Activation (wlan2) Stage 1 of 5 (Device Prepare) complete. Oct 5 03:33:30 taoseeker NetworkManager[802]: Activation (wlan2) Stage 2 of 5 (Device Configure) starting... Oct 5 03:33:30 taoseeker NetworkManager[802]: (wlan2): device state change: prepare -> config (reason 'none') [40 50 0] Oct 5 03:33:30 taoseeker NetworkManager[802]: Activation (wlan2/wireless): connection 'Telenor6904ett' has security, and secrets exist. No new secrets needed. Oct 5 03:33:30 taoseeker NetworkManager[802]: Config: added 'ssid' value 'Telenor6904ett' Oct 5 03:33:30 taoseeker NetworkManager[802]: Config: added 'scan_ssid' value '1' Oct 5 03:33:30 taoseeker NetworkManager[802]: Config: added 'key_mgmt' value 'WPA-PSK' Oct 5 03:33:30 taoseeker NetworkManager[802]: Config: added 'auth_alg' value 'OPEN' Oct 5 03:33:30 taoseeker NetworkManager[802]: Config: added 'psk' value '' Oct 5 03:33:30 taoseeker NetworkManager[802]: Activation (wlan2) Stage 2 of 5 (Device Configure) complete. Oct 5 03:33:30 taoseeker NetworkManager[802]: Config: set interface ap_scan to 1 Oct 5 03:33:30 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 03:33:31 taoseeker wpa_supplicant[987]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 03:33:31 taoseeker kernel: [ 261.247936] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 03:33:31 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 03:33:31 taoseeker kernel: [ 261.274897] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 03:33:31 taoseeker kernel: [ 261.478622] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 03:33:31 taoseeker kernel: [ 261.682516] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 03:33:31 taoseeker wpa_supplicant[987]: wlan2: Trying to associate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 03:33:31 taoseeker kernel: [ 261.730753] wlan2: authenticated Oct 5 03:33:31 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: authenticating -> associating Oct 5 03:33:31 taoseeker kernel: [ 261.738702] wlan2: associating with AP with corrupt beacon Oct 5 03:33:31 taoseeker kernel: [ 261.742852] wlan2: associate with 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 03:33:32 taoseeker kernel: [ 261.946385] wlan2: associate with 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 03:33:32 taoseeker kernel: [ 262.150286] wlan2: associate with 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 03:33:32 taoseeker kernel: [ 262.355042] wlan2: association with 50:67:f0:d3:ed:c4 timed out Oct 5 03:33:32 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: associating -> disconnected Oct 5 03:33:32 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 03:33:33 taoseeker wpa_supplicant[987]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 03:33:33 taoseeker kernel: [ 263.662738] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 03:33:33 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 03:33:33 taoseeker kernel: [ 263.690136] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 03:33:33 taoseeker kernel: [ 263.893391] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 03:33:34 taoseeker kernel: [ 264.097278] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 03:33:34 taoseeker kernel: [ 264.301227] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 03:33:34 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 03:33:34 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 03:33:35 taoseeker wpa_supplicant[987]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 03:33:35 taoseeker kernel: [ 265.621678] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 03:33:35 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 03:33:35 taoseeker kernel: [ 265.664675] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 03:33:35 taoseeker kernel: [ 265.868364] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 03:33:36 taoseeker kernel: [ 266.072310] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 03:33:36 taoseeker kernel: [ 266.276155] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 03:33:36 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 03:33:36 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 03:33:37 taoseeker wpa_supplicant[987]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 03:33:37 taoseeker kernel: [ 267.556772] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 03:33:37 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 03:33:37 taoseeker kernel: [ 267.583749] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 03:33:37 taoseeker kernel: [ 267.787384] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 03:33:38 taoseeker kernel: [ 267.991279] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 03:33:38 taoseeker kernel: [ 268.195168] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 03:33:38 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 03:33:38 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 03:33:39 taoseeker wpa_supplicant[987]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 03:33:39 taoseeker kernel: [ 269.491788] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 03:33:39 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 03:33:39 taoseeker kernel: [ 269.510725] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 03:33:39 taoseeker kernel: [ 269.714396] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 03:33:40 taoseeker kernel: [ 269.918291] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 03:33:40 taoseeker kernel: [ 270.122190] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 03:33:40 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 03:33:40 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 03:33:41 taoseeker wpa_supplicant[987]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 03:33:41 taoseeker kernel: [ 271.394786] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 03:33:41 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 03:33:41 taoseeker kernel: [ 271.413853] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 03:33:41 taoseeker kernel: [ 271.617426] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 03:33:41 taoseeker kernel: [ 271.821392] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 03:33:42 taoseeker kernel: [ 272.025214] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 03:33:42 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 03:33:42 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 03:33:43 taoseeker wpa_supplicant[987]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 03:33:43 taoseeker kernel: [ 273.321797] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 03:33:43 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 03:33:43 taoseeker kernel: [ 273.348801] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 03:33:43 taoseeker kernel: [ 273.552519] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 03:33:43 taoseeker kernel: [ 273.756403] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 03:33:44 taoseeker kernel: [ 273.960283] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 03:33:44 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 03:33:44 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 03:33:45 taoseeker wpa_supplicant[987]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 03:33:45 taoseeker kernel: [ 275.240780] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 03:33:45 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 03:33:45 taoseeker kernel: [ 275.275763] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 03:33:45 taoseeker kernel: [ 275.479457] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 03:33:45 taoseeker kernel: [ 275.683347] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 03:33:45 taoseeker kernel: [ 275.887286] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 03:33:45 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 03:33:46 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 03:33:53 taoseeker wpa_supplicant[987]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 03:33:53 taoseeker kernel: [ 283.348565] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 03:33:53 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 03:33:53 taoseeker kernel: [ 283.367655] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 03:33:53 taoseeker kernel: [ 283.370266] wlan2: authenticated Oct 5 03:33:53 taoseeker wpa_supplicant[987]: wlan2: Trying to associate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 03:33:53 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: authenticating -> associating Oct 5 03:33:53 taoseeker kernel: [ 283.383423] wlan2: associate with 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 03:33:53 taoseeker kernel: [ 283.587311] wlan2: associate with 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 03:33:53 taoseeker kernel: [ 283.591748] wlan2: RX AssocResp from 50:67:f0:d3:ed:c4 (capab=0xc11 status=0 aid=1) Oct 5 03:33:53 taoseeker wpa_supplicant[987]: wlan2: Associated with 50:67:f0:d3:ed:c4 Oct 5 03:33:53 taoseeker kernel: [ 283.615284] wlan2: associated Oct 5 03:33:53 taoseeker kernel: [ 283.615822] IPv6: ADDRCONF(NETDEV_CHANGE): wlan2: link becomes ready Oct 5 03:33:53 taoseeker kernel: [ 283.619678] cfg80211: Pending regulatory request, waiting for it to be processed... Oct 5 03:33:53 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: associating -> associated Oct 5 03:33:54 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: associated -> 4-way handshake Oct 5 03:33:54 taoseeker wpa_supplicant[987]: wlan2: WPA: Key negotiation completed with 50:67:f0:d3:ed:c4 [PTK=CCMP GTK=CCMP] Oct 5 03:33:54 taoseeker wpa_supplicant[987]: wlan2: CTRL-EVENT-CONNECTED - Connection to 50:67:f0:d3:ed:c4 completed (reauth) [id=0 id_str=] Oct 5 03:33:54 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: 4-way handshake -> completed Oct 5 03:33:54 taoseeker NetworkManager[802]: Activation (wlan2/wireless) Stage 2 of 5 (Device Configure) successful. Connected to wireless network 'Telenor6904ett'. Oct 5 03:33:54 taoseeker NetworkManager[802]: Activation (wlan2) Stage 3 of 5 (IP Configure Start) scheduled. Oct 5 03:33:54 taoseeker NetworkManager[802]: Activation (wlan2) Stage 3 of 5 (IP Configure Start) started... Oct 5 03:33:54 taoseeker NetworkManager[802]: (wlan2): device state change: config -> ip-config (reason 'none') [50 70 0] Oct 5 03:33:54 taoseeker NetworkManager[802]: Activation (wlan2) Beginning DHCPv4 transaction (timeout in 45 seconds) Oct 5 03:33:54 taoseeker NetworkManager[802]: dhclient started with pid 1731 Oct 5 03:33:54 taoseeker NetworkManager[802]: Activation (wlan2) Beginning IP6 addrconf. Oct 5 03:33:54 taoseeker NetworkManager[802]: Activation (wlan2) Stage 3 of 5 (IP Configure Start) complete. Oct 5 03:33:54 taoseeker dhclient: Internet Systems Consortium DHCP Client 4.2.4 Oct 5 03:33:54 taoseeker dhclient: Copyright 2004-2012 Internet Systems Consortium. Oct 5 03:33:54 taoseeker dhclient: All rights reserved. Oct 5 03:33:54 taoseeker dhclient: For info, please visit https://www.isc.org/software/dhcp/ Oct 5 03:33:54 taoseeker dhclient: Oct 5 03:33:54 taoseeker dhclient: Listening on LPF/wlan2/00:14:51:81:6a:17 Oct 5 03:33:54 taoseeker dhclient: Sending on LPF/wlan2/00:14:51:81:6a:17 Oct 5 03:33:54 taoseeker dhclient: Sending on Socket/fallback Oct 5 03:33:54 taoseeker NetworkManager[802]: (wlan2): DHCPv4 state changed nbi -> preinit Oct 5 03:33:54 taoseeker dhclient: DHCPREQUEST of 10.0.0.66 on wlan2 to 255.255.255.255 port 67 Oct 5 03:33:57 taoseeker wpa_supplicant[987]: wlan2: CTRL-EVENT-DISCONNECTED bssid=50:67:f0:d3:ed:c4 reason=15 Oct 5 03:33:57 taoseeker kernel: [ 286.975433] wlan2: deauthenticated from 50:67:f0:d3:ed:c4 (Reason: 15) Oct 5 03:33:57 taoseeker kernel: [ 286.977447] cfg80211: All devices are disconnected, going to restore regulatory settings Oct 5 03:33:57 taoseeker kernel: [ 286.977464] cfg80211: Restoring regulatory settings Oct 5 03:33:57 taoseeker kernel: [ 286.977479] cfg80211: Calling CRDA for country: NO Oct 5 03:33:57 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: completed -> disconnected Oct 5 03:33:57 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 03:33:57 taoseeker dhclient: DHCPREQUEST of 10.0.0.66 on wlan2 to 255.255.255.255 port 67 Oct 5 03:33:58 taoseeker wpa_supplicant[987]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 03:33:58 taoseeker kernel: [ 288.230061] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 03:33:58 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 03:33:58 taoseeker kernel: [ 288.241248] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 03:33:58 taoseeker kernel: [ 288.243629] wlan2: authenticated Oct 5 03:33:58 taoseeker wpa_supplicant[987]: wlan2: Trying to associate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 03:33:58 taoseeker kernel: [ 288.247950] wlan2: associating with AP with corrupt beacon Oct 5 03:33:58 taoseeker kernel: [ 288.248930] wlan2: associate with 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 03:33:58 taoseeker kernel: [ 288.251424] wlan2: RX AssocResp from 50:67:f0:d3:ed:c4 (capab=0xc11 status=0 aid=1) Oct 5 03:33:58 taoseeker kernel: [ 288.251909] wlan2: associated Oct 5 03:33:58 taoseeker wpa_supplicant[987]: wlan2: Associated with 50:67:f0:d3:ed:c4 Oct 5 03:33:58 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: authenticating -> associating Oct 5 03:33:58 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: associating -> associated Oct 5 03:33:59 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: associated -> 4-way handshake Oct 5 03:33:59 taoseeker wpa_supplicant[987]: wlan2: WPA: Key negotiation completed with 50:67:f0:d3:ed:c4 [PTK=CCMP GTK=CCMP] Oct 5 03:33:59 taoseeker wpa_supplicant[987]: wlan2: CTRL-EVENT-CONNECTED - Connection to 50:67:f0:d3:ed:c4 completed (reauth) [id=0 id_str=] Oct 5 03:33:59 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: 4-way handshake -> completed Oct 5 03:34:02 taoseeker dhclient: DHCPREQUEST of 10.0.0.66 on wlan2 to 255.255.255.255 port 67 Oct 5 03:34:03 taoseeker dhclient: DHCPACK of 10.0.0.66 from 10.0.0.138 Oct 5 03:34:03 taoseeker dhclient: bound to 10.0.0.66 -- renewal in 35769 seconds. Oct 5 03:34:03 taoseeker NetworkManager[802]: (wlan2): DHCPv4 state changed preinit -> reboot Oct 5 03:34:03 taoseeker NetworkManager[802]: address 10.0.0.66 Oct 5 03:34:03 taoseeker NetworkManager[802]: prefix 24 (255.255.255.0) Oct 5 03:34:03 taoseeker NetworkManager[802]: gateway 10.0.0.138 Oct 5 03:34:03 taoseeker NetworkManager[802]: hostname 'taoseeker' Oct 5 03:34:03 taoseeker NetworkManager[802]: nameserver '130.67.15.198' Oct 5 03:34:03 taoseeker NetworkManager[802]: nameserver '193.213.112.4' Oct 5 03:34:03 taoseeker NetworkManager[802]: nameserver '10.0.0.138' Oct 5 03:34:03 taoseeker NetworkManager[802]: domain name 'lan' Oct 5 03:34:03 taoseeker NetworkManager[802]: Activation (wlan2) Stage 5 of 5 (IPv4 Configure Commit) scheduled... Oct 5 03:34:03 taoseeker NetworkManager[802]: Activation (wlan2) Stage 5 of 5 (IPv4 Commit) started... Oct 5 03:34:04 taoseeker NetworkManager[802]: (wlan2): device state change: ip-config -> activated (reason 'none') [70 100 0] Oct 5 03:34:04 taoseeker NetworkManager[802]: ((null)): writing resolv.conf to /sbin/resolvconf Oct 5 03:34:04 taoseeker NetworkManager[802]: Policy set 'Telenor6904ett' (wlan2) as default for IPv4 routing and DNS. Oct 5 03:34:04 taoseeker NetworkManager[802]: Activation (wlan2) successful, device activated. Oct 5 03:34:04 taoseeker NetworkManager[802]: Activation (wlan2) Stage 5 of 5 (IPv4 Commit) complete. Oct 5 03:34:14 taoseeker NetworkManager[802]: (wlan2): IP6 addrconf timed out or failed. Oct 5 03:34:14 taoseeker NetworkManager[802]: Activation (wlan2) Stage 4 of 5 (IPv6 Configure Timeout) scheduled... Oct 5 03:34:14 taoseeker NetworkManager[802]: Activation (wlan2) Stage 4 of 5 (IPv6 Configure Timeout) started... Oct 5 03:34:14 taoseeker NetworkManager[802]: Activation (wlan2) Stage 4 of 5 (IPv6 Configure Timeout) complete. Oct 5 03:34:30 taoseeker kernel: [ 320.175757] wlan2: deauthenticated from 50:67:f0:d3:ed:c4 (Reason: 3) Oct 5 03:34:30 taoseeker kernel: [ 320.178851] cfg80211: All devices are disconnected, going to restore regulatory settings Oct 5 03:34:30 taoseeker kernel: [ 320.178869] cfg80211: Restoring regulatory settings Oct 5 03:34:30 taoseeker kernel: [ 320.178882] cfg80211: Calling CRDA to update world regulatory domain Oct 5 03:34:30 taoseeker wpa_supplicant[987]: wlan2: CTRL-EVENT-DISCONNECTED bssid=50:67:f0:d3:ed:c4 reason=3 Oct 5 03:34:30 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: completed -> disconnected Oct 5 03:34:30 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 03:34:31 taoseeker wpa_supplicant[987]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 03:34:31 taoseeker kernel: [ 321.433124] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 03:34:31 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 03:34:31 taoseeker kernel: [ 321.444213] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 03:34:31 taoseeker wpa_supplicant[987]: wlan2: Trying to associate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 03:34:31 taoseeker kernel: [ 321.448447] wlan2: authenticated Oct 5 03:34:31 taoseeker kernel: [ 321.450280] wlan2: associating with AP with corrupt beacon Oct 5 03:34:31 taoseeker kernel: [ 321.452205] wlan2: associate with 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 03:34:31 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: authenticating -> associating Oct 5 03:34:31 taoseeker kernel: [ 321.458993] wlan2: RX AssocResp from 50:67:f0:d3:ed:c4 (capab=0xc11 status=0 aid=1) Oct 5 03:34:31 taoseeker kernel: [ 321.459531] wlan2: associated Oct 5 03:34:31 taoseeker wpa_supplicant[987]: wlan2: Associated with 50:67:f0:d3:ed:c4 Oct 5 03:34:31 taoseeker kernel: [ 321.461629] cfg80211: Pending regulatory request, waiting for it to be processed... Oct 5 03:34:31 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: associating -> associated Oct 5 03:34:32 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: associated -> 4-way handshake Oct 5 03:34:32 taoseeker wpa_supplicant[987]: wlan2: WPA: Key negotiation completed with 50:67:f0:d3:ed:c4 [PTK=CCMP GTK=CCMP] Oct 5 03:34:32 taoseeker wpa_supplicant[987]: wlan2: CTRL-EVENT-CONNECTED - Connection to 50:67:f0:d3:ed:c4 completed (reauth) [id=0 id_str=] Oct 5 03:34:32 taoseeker NetworkManager[802]: (wlan2): supplicant interface state: 4-way handshake -> completed Oct 5 03:35:18 taoseeker NetworkManager[802]: nl_recvmsgs() error: (-33) Dump inconsistency detected, interrupted Oct 5 03:40:06 taoseeker NetworkManager[802]: nl_recvmsgs() error: (-33) Dump inconsistency detected, interrupted Oct 5 03:41:54 taoseeker NetworkManager[802]: nl_recvmsgs() error: (-33) Dump inconsistency detected, interrupted Oct 5 03:54:27 taoseeker wpa_supplicant[987]: wlan2: WPA: Group rekeying completed with 50:67:f0:d3:ed:c4 [GTK=CCMP] Oct 5 04:08:54 taoseeker NetworkManager[802]: nl_recvmsgs() error: (-33) Dump inconsistency detected, interrupted Oct 5 04:16:30 taoseeker NetworkManager[802]: nl_recvmsgs() error: (-33) Dump inconsistency detected, interrupted Oct 5 04:17:30 taoseeker NetworkManager[802]: nl_recvmsgs() error: (-33) Dump inconsistency detected, interrupted Oct 5 04:18:59 NetworkManager[802]: last message repeated 2 times Oct 5 04:20:54 taoseeker NetworkManager[802]: nl_recvmsgs() error: (-33) Dump inconsistency detected, interrupted Oct 5 04:23:42 taoseeker NetworkManager[802]: nl_recvmsgs() error: (-33) Dump inconsistency detected, interrupted Oct 5 04:24:28 taoseeker wpa_supplicant[987]: wlan2: WPA: Group rekeying completed with 50:67:f0:d3:ed:c4 [GTK=CCMP] Oct 5 04:26:42 taoseeker NetworkManager[802]: nl_recvmsgs() error: (-33) Dump inconsistency detected, interrupted Oct 5 04:27:59 NetworkManager[802]: last message repeated 2 times Oct 5 04:29:42 taoseeker NetworkManager[802]: nl_recvmsgs() error: (-33) Dump inconsistency detected, interrupted Oct 5 04:30:30 taoseeker NetworkManager[802]: nl_recvmsgs() error: (-33) Dump inconsistency detected, interrupted Oct 5 04:38:18 taoseeker NetworkManager[802]: nl_recvmsgs() error: (-33) Dump inconsistency detected, interrupted Oct 5 04:48:54 taoseeker NetworkManager[802]: nl_recvmsgs() error: (-33) Dump inconsistency detected, interrupted Oct 5 04:49:06 taoseeker NetworkManager[802]: nl_recvmsgs() error: (-33) Dump inconsistency detected, interrupted Oct 5 04:54:29 taoseeker wpa_supplicant[987]: wlan2: WPA: Group rekeying completed with 50:67:f0:d3:ed:c4 [GTK=CCMP] Oct 5 04:56:42 taoseeker NetworkManager[802]: nl_recvmsgs() error: (-33) Dump inconsistency detected, interrupted Oct 5 04:57:30 taoseeker NetworkManager[802]: nl_recvmsgs() error: (-33) Dump inconsistency detected, interrupted Oct 5 04:57:38 taoseeker kernel: Kernel logging (proc) stopped. Oct 5 15:46:28 taoseeker kernel: imklog 5.8.6, log source = /proc/kmsg started. Oct 5 15:46:28 taoseeker kernel: [ 0.000000] Using PowerMac machine description Oct 5 15:46:28 taoseeker kernel: [ 0.000000] Total memory = 1536MB; using 4096kB for hash table (at cfc00000) Oct 5 15:46:28 taoseeker kernel: [ 0.000000] Initializing cgroup subsys cpuset Oct 5 15:46:28 taoseeker kernel: [ 0.000000] Initializing cgroup subsys cpu Oct 5 15:46:28 taoseeker kernel: [ 0.000000] Linux version 3.5.0-17-powerpc-smp (buildd@adare) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #26-Ubuntu SMP Wed Oct 3 21:29:20 UTC 2012 (Ubuntu 3.5.0-17.26-powerpc-smp 3.5.5) Oct 5 15:46:28 taoseeker kernel: [ 0.000000] Found initrd at 0xc1800000:0xc2720000 Oct 5 15:46:28 taoseeker kernel: [ 0.000000] Found UniNorth memory controller & host bridge @ 0xf8000000 revision: 0xd2 Oct 5 15:46:28 taoseeker kernel: [ 0.000000] Mapped at 0xff7c0000 Oct 5 15:46:28 taoseeker kernel: [ 0.000000] Found a Intrepid mac-io controller, rev: 0, mapped at 0xff740000 Oct 5 15:46:28 taoseeker kernel: [ 0.000000] Processor NAP mode on idle enabled. Oct 5 15:46:28 taoseeker kernel: [ 0.000000] PowerMac motherboard: iBook G4 Oct 5 15:46:28 taoseeker kernel: [ 0.000000] via-pmu: Server Mode is disabled Oct 5 15:46:28 taoseeker kernel: [ 0.000000] PMU driver v2 initialized for Core99, firmware: 0c Oct 5 15:46:28 taoseeker kernel: [ 0.000000] CPU maps initialized for 1 thread per core Oct 5 15:46:28 taoseeker kernel: [ 0.000000] (thread shift is 0) Oct 5 15:46:28 taoseeker kernel: [ 0.000000] bootconsole [udbg0] enabled Oct 5 15:46:28 taoseeker kernel: [ 0.000000] Found UniNorth PCI host bridge at 0x00000000f0000000. Firmware bus number: 0->0 Oct 5 15:46:28 taoseeker kernel: [ 0.000000] PCI host bridge /pci@f0000000 ranges: Oct 5 15:46:28 taoseeker kernel: [ 0.000000] MEM 0x00000000f1000000..0x00000000f1ffffff -> 0x00000000f1000000 Oct 5 15:46:28 taoseeker kernel: [ 0.000000] IO 0x00000000f0000000..0x00000000f07fffff -> 0x0000000000000000 Oct 5 15:46:28 taoseeker kernel: [ 0.000000] MEM 0x0000000090000000..0x000000009fffffff -> 0x0000000090000000 Oct 5 15:46:28 taoseeker kernel: [ 0.000000] Found UniNorth PCI host bridge at 0x00000000f2000000. Firmware bus number: 0->0 Oct 5 15:46:28 taoseeker kernel: [ 0.000000] PCI host bridge /pci@f2000000 (primary) ranges: Oct 5 15:46:28 taoseeker kernel: [ 0.000000] MEM 0x00000000f3000000..0x00000000f3ffffff -> 0x00000000f3000000 Oct 5 15:46:28 taoseeker kernel: [ 0.000000] IO 0x00000000f2000000..0x00000000f27fffff -> 0x0000000000000000 Oct 5 15:46:28 taoseeker kernel: [ 0.000000] MEM 0x0000000080000000..0x000000008fffffff -> 0x0000000080000000 Oct 5 15:46:28 taoseeker kernel: [ 0.000000] Found UniNorth PCI host bridge at 0x00000000f4000000. Firmware bus number: 0->0 Oct 5 15:46:28 taoseeker kernel: [ 0.000000] PCI host bridge /pci@f4000000 ranges: Oct 5 15:46:28 taoseeker kernel: [ 0.000000] MEM 0x00000000f5000000..0x00000000f5ffffff -> 0x00000000f5000000 Oct 5 15:46:28 taoseeker kernel: [ 0.000000] IO 0x00000000f4000000..0x00000000f47fffff -> 0x0000000000000000 Oct 5 15:46:28 taoseeker kernel: [ 0.000000] nvram: Checking bank 0... Oct 5 15:46:28 taoseeker kernel: [ 0.000000] nvram: gen0=968, gen1=969 Oct 5 15:46:28 taoseeker kernel: [ 0.000000] nvram: Active bank is: 1 Oct 5 15:46:28 taoseeker kernel: [ 0.000000] nvram: OF partition at 0x410 Oct 5 15:46:28 taoseeker kernel: [ 0.000000] nvram: XP partition at 0x1020 Oct 5 15:46:28 taoseeker kernel: [ 0.000000] nvram: NR partition at 0x1120 Oct 5 15:46:28 taoseeker kernel: [ 0.000000] Top of RAM: 0x60000000, Total RAM: 0x60000000 Oct 5 15:46:28 taoseeker kernel: [ 0.000000] Memory hole size: 0MB Oct 5 15:46:28 taoseeker kernel: [ 0.000000] Zone ranges: Oct 5 15:46:28 taoseeker kernel: [ 0.000000] DMA [mem 0x00000000-0x2fffffff] Oct 5 15:46:28 taoseeker kernel: [ 0.000000] Normal empty Oct 5 15:46:28 taoseeker kernel: [ 0.000000] HighMem [mem 0x30000000-0x5fffffff] Oct 5 15:46:28 taoseeker kernel: [ 0.000000] Movable zone start for each node Oct 5 15:46:28 taoseeker kernel: [ 0.000000] Early memory node ranges Oct 5 15:46:28 taoseeker kernel: [ 0.000000] node 0: [mem 0x00000000-0x5fffffff] Oct 5 15:46:28 taoseeker kernel: [ 0.000000] On node 0 totalpages: 393216 Oct 5 15:46:28 taoseeker kernel: [ 0.000000] free_area_init_node: node 0, pgdat c091c220, node_mem_map c0abf000 Oct 5 15:46:28 taoseeker kernel: [ 0.000000] DMA zone: 1536 pages used for memmap Oct 5 15:46:28 taoseeker kernel: [ 0.000000] DMA zone: 0 pages reserved Oct 5 15:46:28 taoseeker kernel: [ 0.000000] DMA zone: 195072 pages, LIFO batch:31 Oct 5 15:46:28 taoseeker kernel: [ 0.000000] HighMem zone: 1536 pages used for memmap Oct 5 15:46:28 taoseeker kernel: [ 0.000000] HighMem zone: 195072 pages, LIFO batch:31 Oct 5 15:46:28 taoseeker kernel: [ 0.000000] PERCPU: Embedded 9 pages/cpu @c16c8000 s12832 r8192 d15840 u36864 Oct 5 15:46:28 taoseeker kernel: [ 0.000000] pcpu-alloc: s12832 r8192 d15840 u36864 alloc=9*4096 Oct 5 15:46:28 taoseeker kernel: [ 0.000000] pcpu-alloc: [0] 0 Oct 5 15:46:28 taoseeker kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 390144 Oct 5 15:46:28 taoseeker kernel: [ 0.000000] Kernel command line: root=UUID=2637ecb6-e215-4cbb-991f-e19d18210b06 ro quiet splash video=radeonfb:1024x768-32@60 Oct 5 15:46:28 taoseeker kernel: [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) Oct 5 15:46:28 taoseeker kernel: [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Oct 5 15:46:28 taoseeker kernel: [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Oct 5 15:46:28 taoseeker kernel: [ 0.000000] allocated 3145728 bytes of page_cgroup Oct 5 15:46:28 taoseeker kernel: [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups Oct 5 15:46:28 taoseeker kernel: [ 0.000000] High memory: 786432k Oct 5 15:46:28 taoseeker kernel: [ 0.000000] Memory: 1525688k/1572864k available (9032k kernel code, 47176k reserved, 396k data, 1521k bss, 384k init) Oct 5 15:46:28 taoseeker kernel: [ 0.000000] Kernel virtual memory layout: Oct 5 15:46:28 taoseeker kernel: [ 0.000000] * 0xfff9f000..0xfffff000 : fixmap Oct 5 15:46:28 taoseeker kernel: [ 0.000000] * 0xff800000..0xffc00000 : highmem PTEs Oct 5 15:46:28 taoseeker kernel: [ 0.000000] * 0xfdf32000..0xff800000 : early ioremap Oct 5 15:46:28 taoseeker kernel: [ 0.000000] * 0xf1000000..0xfdf32000 : vmalloc & ioremap Oct 5 15:46:28 taoseeker kernel: [ 0.000000] SLUB: Genslabs=15, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Oct 5 15:46:28 taoseeker kernel: [ 0.000000] Hierarchical RCU implementation. Oct 5 15:46:28 taoseeker kernel: [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. Oct 5 15:46:28 taoseeker kernel: [ 0.000000] NR_IRQS:512 nr_irqs:512 16 Oct 5 15:46:28 taoseeker kernel: [ 0.000000] mpic: Resetting Oct 5 15:46:28 taoseeker kernel: [ 0.000000] mpic: Setting up MPIC " MPIC 1 " version 1.2 at 80040000, max 1 CPUs Oct 5 15:46:28 taoseeker kernel: [ 0.000000] mpic: ISU size: 64, shift: 6, mask: 3f Oct 5 15:46:28 taoseeker kernel: [ 0.000000] mpic: Initializing for 64 sources Oct 5 15:46:28 taoseeker kernel: [ 0.000000] GMT Delta read from XPRAM: 0 minutes, DST: off Oct 5 15:46:28 taoseeker kernel: [ 0.000000] time_init: decrementer frequency = 18.432000 MHz Oct 5 15:46:28 taoseeker kernel: [ 0.000000] time_init: processor frequency = 1420.000000 MHz Oct 5 15:46:28 taoseeker kernel: [ 0.000000] clocksource: timebase mult[3640e38e] shift[24] registered Oct 5 15:46:28 taoseeker kernel: [ 0.000000] clockevent: decrementer mult[4b7f5a5] shift[32] cpu[0] Oct 5 15:46:28 taoseeker kernel: [ 0.000000] Console: colour dummy device 80x25 Oct 5 15:46:28 taoseeker kernel: [ 0.000000] console [tty0] enabled, bootconsole disabled Oct 5 15:46:28 taoseeker kernel: [ 0.000434] pid_max: default: 32768 minimum: 301 Oct 5 15:46:28 taoseeker kernel: [ 0.000548] Security Framework initialized Oct 5 15:46:28 taoseeker kernel: [ 0.000646] AppArmor: AppArmor initialized Oct 5 15:46:28 taoseeker kernel: [ 0.000651] Yama: becoming mindful. Oct 5 15:46:28 taoseeker kernel: [ 0.000745] Mount-cache hash table entries: 512 Oct 5 15:46:28 taoseeker kernel: [ 0.001381] device-tree: Duplicate name in /cpus/PowerPC,G4@0, renamed to "l2-cache#1" Oct 5 15:46:28 taoseeker kernel: [ 0.007009] Initializing cgroup subsys cpuacct Oct 5 15:46:28 taoseeker kernel: [ 0.007024] Initializing cgroup subsys memory Oct 5 15:46:28 taoseeker kernel: [ 0.007056] Initializing cgroup subsys devices Oct 5 15:46:28 taoseeker kernel: [ 0.007064] Initializing cgroup subsys freezer Oct 5 15:46:28 taoseeker kernel: [ 0.007070] Initializing cgroup subsys blkio Oct 5 15:46:28 taoseeker kernel: [ 0.007077] Initializing cgroup subsys perf_event Oct 5 15:46:28 taoseeker kernel: [ 0.007185] ftrace: allocating 21198 entries in 63 pages Oct 5 15:46:28 taoseeker kernel: [ 0.040005] PowerMac SMP probe found 1 cpus Oct 5 15:46:28 taoseeker kernel: [ 0.040024] MPC7450 family performance monitor hardware support registered Oct 5 15:46:28 taoseeker kernel: [ 0.040756] Brought up 1 CPUs Oct 5 15:46:28 taoseeker kernel: [ 0.041403] devtmpfs: initialized Oct 5 15:46:28 taoseeker kernel: [ 0.041775] EVM: security.selinux Oct 5 15:46:28 taoseeker kernel: [ 0.041781] EVM: security.SMACK64 Oct 5 15:46:28 taoseeker kernel: [ 0.041786] EVM: security.capability Oct 5 15:46:28 taoseeker kernel: [ 0.044616] dummy: Oct 5 15:46:28 taoseeker kernel: [ 0.044842] NET: Registered protocol family 16 Oct 5 15:46:28 taoseeker kernel: [ 0.045839] KeyWest i2c @0xf8001003 irq 42 /uni-n@f8000000/i2c@f8001000 Oct 5 15:46:28 taoseeker kernel: [ 0.045852] channel 1 bus /uni-n@f8000000/i2c@f8001000/i2c-bus@1 Oct 5 15:46:28 taoseeker kernel: [ 0.045962] KeyWest i2c @0x80018000 irq 26 /pci@f2000000/mac-io@17/i2c@18000 Oct 5 15:46:28 taoseeker kernel: [ 0.045972] channel 0 bus /pci@f2000000/mac-io@17/i2c@18000/i2c-bus@0 Oct 5 15:46:28 taoseeker kernel: [ 0.045990] PMU i2c /pci@f2000000/mac-io@17/via-pmu@16000/pmu-i2c Oct 5 15:46:28 taoseeker kernel: [ 0.045998] channel 1 bus Oct 5 15:46:28 taoseeker kernel: [ 0.046012] channel 2 bus Oct 5 15:46:28 taoseeker kernel: [ 0.046597] PCI: Probing PCI hardware Oct 5 15:46:28 taoseeker kernel: [ 0.046696] PCI host bridge to bus 0000:00 Oct 5 15:46:28 taoseeker kernel: [ 0.046716] pci_bus 0000:00: >root bus resource [io 0x802000-0x1001fff] (bus address [0x0000-0x7fffff]) Oct 5 15:46:28 taoseeker kernel: [ 0.046727] pci_bus 0000:00: >root bus resource [mem 0xf1000000-0xf1ffffff] Oct 5 15:46:28 taoseeker kernel: [ 0.046736] pci_bus 0000:00: >root bus resource [mem 0x90000000-0x9fffffff] Oct 5 15:46:28 taoseeker kernel: [ 0.046791] pci 0000:00:0b.0: >[106b:0034] type 00 class 0x060000 Oct 5 15:46:28 taoseeker kernel: [ 0.046916] pci 0000:00:10.0: >[1002:4e56] type 00 class 0x030000 Oct 5 15:46:28 taoseeker kernel: [ 0.046946] pci 0000:00:10.0: >reg 10: [mem 0x98000000-0x9fffffff pref] Oct 5 15:46:28 taoseeker kernel: [ 0.046962] pci 0000:00:10.0: >reg 14: [io 0x802400-0x8024ff] Oct 5 15:46:28 taoseeker kernel: [ 0.046979] pci 0000:00:10.0: >reg 18: [mem 0x90000000-0x9000ffff] Oct 5 15:46:28 taoseeker kernel: [ 0.047016] pci 0000:00:10.0: >reg 30: [mem 0x90020000-0x9003ffff pref] Oct 5 15:46:28 taoseeker kernel: [ 0.047065] pci 0000:00:10.0: >supports D1 D2 Oct 5 15:46:28 taoseeker kernel: [ 0.047445] PCI host bridge to bus 0001:10 Oct 5 15:46:28 taoseeker kernel: [ 0.047457] pci_bus 0001:10: >root bus resource [io 0x0000-0x7fffff] Oct 5 15:46:28 taoseeker kernel: [ 0.047467] pci_bus 0001:10: >root bus resource [mem 0xf3000000-0xf3ffffff] Oct 5 15:46:28 taoseeker kernel: [ 0.047476] pci_bus 0001:10: >root bus resource [mem 0x80000000-0x8fffffff] Oct 5 15:46:28 taoseeker kernel: [ 0.047522] pci 0001:10:0b.0: >[106b:0035] type 00 class 0x060000 Oct 5 15:46:28 taoseeker kernel: [ 0.047614] pci 0001:10:12.0: >[14e4:4318] type 00 class 0x028000 Oct 5 15:46:28 taoseeker kernel: [ 0.047637] pci 0001:10:12.0: >reg 10: [mem 0x80084000-0x80085fff] Oct 5 15:46:28 taoseeker kernel: [ 0.047732] pci 0001:10:17.0: >[106b:003e] type 00 class 0xff0000 Oct 5 15:46:28 taoseeker kernel: [ 0.047753] pci 0001:10:17.0: >reg 10: [mem 0x80000000-0x8007ffff] Oct 5 15:46:28 taoseeker kernel: [ 0.047911] pci 0001:10:18.0: >[106b:003f] type 00 class 0x0c0310 Oct 5 15:46:28 taoseeker kernel: [ 0.047935] pci 0001:10:18.0: >reg 10: [mem 0x00000000-0x00000fff] Oct 5 15:46:28 taoseeker kernel: [ 0.048041] pci 0001:10:19.0: >[106b:003f] type 00 class 0x0c0310 Oct 5 15:46:28 taoseeker kernel: [ 0.048063] pci 0001:10:19.0: >reg 10: [mem 0x00000000-0x00000fff] Oct 5 15:46:28 taoseeker kernel: [ 0.048153] pci 0001:10:1a.0: >[106b:003f] type 00 class 0x0c0310 Oct 5 15:46:28 taoseeker kernel: [ 0.048175] pci 0001:10:1a.0: >reg 10: [mem 0x80083000-0x80083fff] Oct 5 15:46:28 taoseeker kernel: [ 0.048269] pci 0001:10:1b.0: >[1033:0035] type 00 class 0x0c0310 Oct 5 15:46:28 taoseeker kernel: [ 0.048296] pci 0001:10:1b.0: >reg 10: [mem 0x80082000-0x80082fff] Oct 5 15:46:28 taoseeker kernel: [ 0.048384] pci 0001:10:1b.0: >supports D1 D2 Oct 5 15:46:28 taoseeker kernel: [ 0.048393] pci 0001:10:1b.0: >PME# supported from D0 D1 D2 D3hot D3cold Oct 5 15:46:28 taoseeker kernel: [ 0.048435] pci 0001:10:1b.1: >[1033:0035] type 00 class 0x0c0310 Oct 5 15:46:28 taoseeker kernel: [ 0.048462] pci 0001:10:1b.1: >reg 10: [mem 0x80081000-0x80081fff] Oct 5 15:46:28 taoseeker kernel: [ 0.048550] pci 0001:10:1b.1: >supports D1 D2 Oct 5 15:46:28 taoseeker kernel: [ 0.048559] pci 0001:10:1b.1: >PME# supported from D0 D1 D2 D3hot D3cold Oct 5 15:46:28 taoseeker kernel: [ 0.048601] pci 0001:10:1b.2: >[1033:00e0] type 00 class 0x0c0320 Oct 5 15:46:28 taoseeker kernel: [ 0.048627] pci 0001:10:1b.2: >reg 10: [mem 0x80080000-0x800800ff] Oct 5 15:46:28 taoseeker kernel: [ 0.048715] pci 0001:10:1b.2: >supports D1 D2 Oct 5 15:46:28 taoseeker kernel: [ 0.048724] pci 0001:10:1b.2: >PME# supported from D0 D1 D2 D3hot D3cold Oct 5 15:46:28 taoseeker kernel: [ 0.050002] PCI host bridge to bus 0002:20 Oct 5 15:46:28 taoseeker kernel: [ 0.050019] pci_bus 0002:20: >root bus resource [io 0xff7fe000-0xffffdfff] (bus address [0x0000-0x7fffff]) Oct 5 15:46:28 taoseeker kernel: [ 0.050029] pci_bus 0002:20: >root bus resource [mem 0xf5000000-0xf5ffffff] Oct 5 15:46:28 taoseeker kernel: [ 0.050075] pci 0002:20:0b.0: >[106b:0036] type 00 class 0x060000 Oct 5 15:46:28 taoseeker kernel: [ 0.050148] pci 0002:20:0d.0: >[106b:003b] type 00 class 0xff0000 Oct 5 15:46:28 taoseeker kernel: [ 0.050167] pci 0002:20:0d.0: >reg 10: [mem 0xf5004000-0xf5007fff] Oct 5 15:46:28 taoseeker kernel: [ 0.050247] pci 0002:20:0e.0: >[106b:0031] type 00 class 0x0c0010 Oct 5 15:46:28 taoseeker kernel: [ 0.050271] pci 0002:20:0e.0: >reg 10: [mem 0xf5000000-0xf5000fff] Oct 5 15:46:28 taoseeker kernel: [ 0.050344] pci 0002:20:0e.0: >supports D1 D2 Oct 5 15:46:28 taoseeker kernel: [ 0.050354] pci 0002:20:0e.0: >PME# supported from D0 D1 D2 D3hot Oct 5 15:46:28 taoseeker kernel: [ 0.050397] pci 0002:20:0f.0: >[106b:0032] type 00 class 0x020000 Oct 5 15:46:28 taoseeker kernel: [ 0.050418] pci 0002:20:0f.0: >reg 10: [mem 0xf5200000-0xf53fffff] Oct 5 15:46:28 taoseeker kernel: [ 0.050466] pci 0002:20:0f.0: >reg 30: [mem 0xf5100000-0xf51fffff pref] Oct 5 15:46:28 taoseeker kernel: [ 0.051260] PCI 0000:00 Cannot reserve Legacy IO [io 0x802000-0x802fff] Oct 5 15:46:28 taoseeker kernel: [ 0.051331] pci_bus 0000:00: >resource 4 [io 0x802000-0x1001fff] Oct 5 15:46:28 taoseeker kernel: [ 0.051341] pci_bus 0000:00: >resource 5 [mem 0xf1000000-0xf1ffffff] Oct 5 15:46:28 taoseeker kernel: [ 0.051350] pci_bus 0000:00: >resource 6 [mem 0x90000000-0x9fffffff] Oct 5 15:46:28 taoseeker kernel: [ 0.051360] pci_bus 0001:10: >resource 4 [io 0x0000-0x7fffff] Oct 5 15:46:28 taoseeker kernel: [ 0.051370] pci_bus 0001:10: >resource 5 [mem 0xf3000000-0xf3ffffff] Oct 5 15:46:28 taoseeker kernel: [ 0.051380] pci_bus 0001:10: >resource 6 [mem 0x80000000-0x8fffffff] Oct 5 15:46:28 taoseeker kernel: [ 0.051390] pci_bus 0002:20: >resource 4 [io 0xff7fe000-0xffffdfff] Oct 5 15:46:28 taoseeker kernel: [ 0.051400] pci_bus 0002:20: >resource 5 [mem 0xf5000000-0xf5ffffff] Oct 5 15:46:28 taoseeker kernel: [ 0.055498] bio: create slab at 0 Oct 5 15:46:28 taoseeker kernel: [ 0.056398] vgaarb: device added: PCI:0000:00:10.0,decodes=io+mem,owns=mem,locks=none Oct 5 15:46:28 taoseeker kernel: [ 0.056447] vgaarb: loaded Oct 5 15:46:28 taoseeker kernel: [ 0.056452] vgaarb: bridge control possible 0000:00:10.0 Oct 5 15:46:28 taoseeker kernel: [ 0.057407] SCSI subsystem initialized Oct 5 15:46:28 taoseeker kernel: [ 0.057561] libata version 3.00 loaded. Oct 5 15:46:28 taoseeker kernel: [ 0.057741] usbcore: registered new interface driver usbfs Oct 5 15:46:28 taoseeker kernel: [ 0.057784] usbcore: registered new interface driver hub Oct 5 15:46:28 taoseeker kernel: [ 0.057876] usbcore: registered new device driver usb Oct 5 15:46:28 taoseeker kernel: [ 0.058608] NetLabel: Initializing Oct 5 15:46:28 taoseeker kernel: [ 0.058616] NetLabel: domain hash size = 128 Oct 5 15:46:28 taoseeker kernel: [ 0.058621] NetLabel: protocols = UNLABELED CIPSOv4 Oct 5 15:46:28 taoseeker kernel: [ 0.058667] NetLabel: unlabeled traffic allowed by default Oct 5 15:46:28 taoseeker kernel: [ 0.058885] Switching to clocksource timebase Oct 5 15:46:28 taoseeker kernel: [ 0.074641] AppArmor: AppArmor Filesystem Enabled Oct 5 15:46:28 taoseeker kernel: [ 0.081428] NET: Registered protocol family 2 Oct 5 15:46:28 taoseeker kernel: [ 0.081616] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) Oct 5 15:46:28 taoseeker kernel: [ 0.082287] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) Oct 5 15:46:28 taoseeker kernel: [ 0.084796] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) Oct 5 15:46:28 taoseeker kernel: [ 0.086000] TCP: Hash tables configured (established 131072 bind 65536) Oct 5 15:46:28 taoseeker kernel: [ 0.086008] TCP: reno registered Oct 5 15:46:28 taoseeker kernel: [ 0.086022] UDP hash table entries: 512 (order: 2, 16384 bytes) Oct 5 15:46:28 taoseeker kernel: [ 0.086089] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) Oct 5 15:46:28 taoseeker kernel: [ 0.086431] NET: Registered protocol family 1 Oct 5 15:46:28 taoseeker kernel: [ 0.086527] Apple USB OHCI 0001:10:18.0 disabled by firmware Oct 5 15:46:28 taoseeker kernel: [ 0.086542] pci 0001:10:18.0: >Can't enable PCI device, BIOS handoff failed. Oct 5 15:46:28 taoseeker kernel: [ 0.086557] Apple USB OHCI 0001:10:19.0 disabled by firmware Oct 5 15:46:28 taoseeker kernel: [ 0.086565] pci 0001:10:19.0: >Can't enable PCI device, BIOS handoff failed. Oct 5 15:46:28 taoseeker kernel: [ 0.086592] pci 0001:10:1a.0: >enabling device (0000 -> 0002) Oct 5 15:46:28 taoseeker kernel: [ 0.139019] pci 0001:10:1b.0: >enabling device (0000 -> 0002) Oct 5 15:46:28 taoseeker kernel: [ 0.194964] pci 0001:10:1b.1: >enabling device (0000 -> 0002) Oct 5 15:46:28 taoseeker kernel: [ 0.250959] pci 0001:10:1b.2: >enabling device (0004 -> 0006) Oct 5 15:46:28 taoseeker kernel: [ 0.251013] PCI: CLS mismatch (32 != 1020), using 32 bytes Oct 5 15:46:28 taoseeker kernel: [ 0.251561] Thermal assist unit not available Oct 5 15:46:28 taoseeker kernel: [ 0.251704] Registering PowerMac CPU frequency driver Oct 5 15:46:28 taoseeker kernel: [ 0.251711] Low: 710 Mhz, High: 1420 Mhz, Boot: 710 Mhz Oct 5 15:46:28 taoseeker kernel: [ 0.252053] Trying to unpack rootfs image as initramfs... Oct 5 15:46:28 taoseeker kernel: [ 0.260326] audit: initializing netlink socket (disabled) Oct 5 15:46:28 taoseeker kernel: [ 0.260368] type=2000 audit(1349444776.244:1): initialized Oct 5 15:46:28 taoseeker kernel: [ 0.375329] highmem bounce pool size: 64 pages Oct 5 15:46:28 taoseeker kernel: [ 0.383127] VFS: Disk quotas dquot_6.5.2 Oct 5 15:46:28 taoseeker kernel: [ 0.383288] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Oct 5 15:46:28 taoseeker kernel: [ 0.384516] fuse init (API version 7.19) Oct 5 15:46:28 taoseeker kernel: [ 0.384719] msgmni has been set to 1445 Oct 5 15:46:28 taoseeker kernel: [ 0.399270] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) Oct 5 15:46:28 taoseeker kernel: [ 0.399421] io scheduler noop registered Oct 5 15:46:28 taoseeker kernel: [ 0.399426] io scheduler deadline registered (default) Oct 5 15:46:28 taoseeker kernel: [ 0.399465] io scheduler cfq registered Oct 5 15:46:28 taoseeker kernel: [ 0.399697] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Oct 5 15:46:28 taoseeker kernel: [ 0.399721] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 Oct 5 15:46:28 taoseeker kernel: [ 0.399897] radeonfb 0000:00:10.0: >enabling device (0006 -> 0007) Oct 5 15:46:28 taoseeker kernel: [ 0.667408] radeonfb 0000:00:10.0: >Invalid ROM contents Oct 5 15:46:28 taoseeker kernel: [ 0.667429] radeonfb (0000:00:10.0): Invalid ROM signature 0 should be 0xaa55 Oct 5 15:46:28 taoseeker kernel: [ 0.667439] radeonfb: Retrieved PLL infos from Open Firmware Oct 5 15:46:28 taoseeker kernel: [ 0.667445] radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=183.00 Mhz, System=210.00 MHz Oct 5 15:46:28 taoseeker kernel: [ 0.667448] radeonfb: PLL min 12000 max 35000 Oct 5 15:46:28 taoseeker kernel: [ 0.764143] i2c i2c-2: >unable to read EDID block. Oct 5 15:46:28 taoseeker kernel: [ 0.916378] i2c i2c-2: >unable to read EDID block. Oct 5 15:46:28 taoseeker kernel: [ 1.036370] Freeing initrd memory: 15488k freed Oct 5 15:46:28 taoseeker kernel: [ 1.067980] i2c i2c-2: >unable to read EDID block. Oct 5 15:46:28 taoseeker kernel: [ 1.423908] radeonfb: Monitor 1 type LCD found Oct 5 15:46:28 taoseeker kernel: [ 1.423911] radeonfb: EDID probed Oct 5 15:46:28 taoseeker kernel: [ 1.423914] radeonfb: Monitor 2 type no found Oct 5 15:46:28 taoseeker kernel: [ 1.423927] radeonfb: Using Firmware dividers 0x00020074 from PPLL 0 Oct 5 15:46:28 taoseeker kernel: [ 1.424016] radeonfb: Dynamic Clock Power Management enabled Oct 5 15:46:28 taoseeker kernel: [ 1.494998] Console: switching to colour frame buffer device 128x48 Oct 5 15:46:28 taoseeker kernel: [ 1.555070] radeonfb: Backlight initialized (radeonbl0) Oct 5 15:46:28 taoseeker kernel: [ 1.555075] radeonfb (0000:00:10.0): ATI Radeon 4e56 "NV" Oct 5 15:46:28 taoseeker kernel: [ 1.556009] pmac_zilog: 0.6 (Benjamin Herrenschmidt ) Oct 5 15:46:28 taoseeker kernel: [ 1.556124] Generic non-volatile memory driver v1.1 Oct 5 15:46:28 taoseeker kernel: [ 1.556176] Linux agpgart interface v0.103 Oct 5 15:46:28 taoseeker kernel: [ 1.559200] brd: module loaded Oct 5 15:46:28 taoseeker kernel: [ 1.560930] loop: module loaded Oct 5 15:46:28 taoseeker kernel: [ 1.561117] MacIO PCI driver attached to Intrepid chipset Oct 5 15:46:28 taoseeker kernel: [ 1.561959] 0.00013020:ch-a: ttyPZ0 at MMIO 0x80013020 (irq = 22) is a Z85c30 ESCC - Serial port Oct 5 15:46:28 taoseeker kernel: [ 1.562218] 0.00013000:ch-b: ttyPZ1 at MMIO 0x80013000 (irq = 23) is a Z85c30 ESCC - Serial port Oct 5 15:46:28 taoseeker kernel: [ 1.563075] pata-pci-macio 0002:20:0d.0: >enabling device (0000 -> 0002) Oct 5 15:46:28 taoseeker kernel: [ 1.563252] adb: starting probe task... Oct 5 15:46:28 taoseeker kernel: [ 1.578940] pata-pci-macio 0002:20:0d.0: >Activating pata-macio chipset UniNorth ATA-6, Apple bus ID 3 Oct 5 15:46:28 taoseeker kernel: [ 1.579312] scsi0 : pata_macio Oct 5 15:46:28 taoseeker kernel: [ 1.579652] ata1: PATA max UDMA/100 irq 39 Oct 5 15:46:28 taoseeker kernel: [ 1.588924] adb devices: [2]: 2 c4 [7]: 7 1f Oct 5 15:46:28 taoseeker kernel: [ 1.594394] ADB keyboard at 2, handler 1 Oct 5 15:46:28 taoseeker kernel: [ 1.594408] Detected ADB keyboard, type ISO, swapping keys. Oct 5 15:46:28 taoseeker kernel: [ 1.594505] input: ADB keyboard as /devices/virtual/input/input0 Oct 5 15:46:28 taoseeker kernel: [ 1.594603] input: ADB Powerbook buttons as /devices/virtual/input/input1 Oct 5 15:46:28 taoseeker kernel: [ 1.594609] adb: finished probe task... Oct 5 15:46:28 taoseeker kernel: [ 1.743354] ata1.00: ATA-7: FUJITSU MHV2060AT, 008100A0, max UDMA/100 Oct 5 15:46:28 taoseeker kernel: [ 1.743361] ata1.00: 117210240 sectors, multi 16: LBA48 Oct 5 15:46:28 taoseeker kernel: [ 1.759231] ata1.00: configured for UDMA/100 Oct 5 15:46:28 taoseeker kernel: [ 1.759534] scsi 0:0:0:0: >Direct-Access ATA FUJITSU MHV2060A 0081 PQ: 0 ANSI: 5 Oct 5 15:46:28 taoseeker kernel: [ 1.759936] sd 0:0:0:0: >Attached scsi generic sg0 type 0 Oct 5 15:46:28 taoseeker kernel: [ 1.760162] sd 0:0:0:0: >[sda] 117210240 512-byte logical blocks: (60.0 GB/55.8 GiB) Oct 5 15:46:28 taoseeker kernel: [ 1.760287] sd 0:0:0:0: >[sda] Write Protect is off Oct 5 15:46:28 taoseeker kernel: [ 1.760294] sd 0:0:0:0: >[sda] Mode Sense: 00 3a 00 00 Oct 5 15:46:28 taoseeker kernel: [ 1.760344] sd 0:0:0:0: >[sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Oct 5 15:46:28 taoseeker kernel: [ 1.844390] sda: [mac] sda1 sda2 sda3 sda4 sda5 Oct 5 15:46:28 taoseeker kernel: [ 1.845228] sd 0:0:0:0: >[sda] Attached SCSI disk Oct 5 15:46:28 taoseeker kernel: [ 2.598942] pata-macio 0.00020000:ata-3: >Activating pata-macio chipset KeyLargo ATA-3, Apple bus ID 0 Oct 5 15:46:28 taoseeker kernel: [ 2.599327] scsi1 : pata_macio Oct 5 15:46:28 taoseeker kernel: [ 2.599415] ata2: PATA max MWDMA2 irq 24 Oct 5 15:46:28 taoseeker kernel: [ 2.600030] Fixed MDIO Bus: probed Oct 5 15:46:28 taoseeker kernel: [ 2.600139] tun: Universal TUN/TAP device driver, 1.6 Oct 5 15:46:28 taoseeker kernel: [ 2.600142] tun: (C) 1999-2004 Max Krasnyansky Oct 5 15:46:28 taoseeker kernel: [ 2.600265] PPP generic driver version 2.4.2 Oct 5 15:46:28 taoseeker kernel: [ 2.600372] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Oct 5 15:46:28 taoseeker kernel: [ 2.600468] ehci_hcd 0001:10:1b.2: >EHCI Host Controller Oct 5 15:46:28 taoseeker kernel: [ 2.600492] ehci_hcd 0001:10:1b.2: >new USB bus registered, assigned bus number 1 Oct 5 15:46:28 taoseeker kernel: [ 2.623012] ehci_hcd 0001:10:1b.2: >irq 63, io mem 0x80080000 Oct 5 15:46:28 taoseeker kernel: [ 2.634924] ehci_hcd 0001:10:1b.2: >USB 2.0 started, EHCI 1.00 Oct 5 15:46:28 taoseeker kernel: [ 2.634987] usb usb1: >New USB device found, idVendor=1d6b, idProduct=0002 Oct 5 15:46:28 taoseeker kernel: [ 2.634993] usb usb1: >New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 5 15:46:28 taoseeker kernel: [ 2.634998] usb usb1: >Product: EHCI Host Controller Oct 5 15:46:28 taoseeker kernel: [ 2.635002] usb usb1: >Manufacturer: Linux 3.5.0-17-powerpc-smp ehci_hcd Oct 5 15:46:28 taoseeker kernel: [ 2.635007] usb usb1: >SerialNumber: 0001:10:1b.2 Oct 5 15:46:28 taoseeker kernel: [ 2.635275] hub 1-0:1.0: >USB hub found Oct 5 15:46:28 taoseeker kernel: [ 2.635289] hub 1-0:1.0: >5 ports detected Oct 5 15:46:28 taoseeker kernel: [ 2.635519] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver Oct 5 15:46:28 taoseeker kernel: [ 2.635571] Apple USB OHCI 0001:10:18.0 disabled by firmware Oct 5 15:46:28 taoseeker kernel: [ 2.635591] Apple USB OHCI 0001:10:19.0 disabled by firmware Oct 5 15:46:28 taoseeker kernel: [ 2.635627] ohci_hcd 0001:10:1a.0: >OHCI Host Controller Oct 5 15:46:28 taoseeker kernel: [ 2.635640] ohci_hcd 0001:10:1a.0: >new USB bus registered, assigned bus number 2 Oct 5 15:46:28 taoseeker kernel: [ 2.635682] ohci_hcd 0001:10:1a.0: >irq 29, io mem 0x80083000 Oct 5 15:46:28 taoseeker kernel: [ 2.710506] usb usb2: >New USB device found, idVendor=1d6b, idProduct=0001 Oct 5 15:46:28 taoseeker kernel: [ 2.710512] usb usb2: >New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 5 15:46:28 taoseeker kernel: [ 2.710518] usb usb2: >Product: OHCI Host Controller Oct 5 15:46:28 taoseeker kernel: [ 2.710522] usb usb2: >Manufacturer: Linux 3.5.0-17-powerpc-smp ohci_hcd Oct 5 15:46:28 taoseeker kernel: [ 2.710526] usb usb2: >SerialNumber: 0001:10:1a.0 Oct 5 15:46:28 taoseeker kernel: [ 2.710762] hub 2-0:1.0: >USB hub found Oct 5 15:46:28 taoseeker kernel: [ 2.710773] hub 2-0:1.0: >2 ports detected Oct 5 15:46:28 taoseeker kernel: [ 2.710906] ohci_hcd 0001:10:1b.0: >OHCI Host Controller Oct 5 15:46:28 taoseeker kernel: [ 2.710937] ohci_hcd 0001:10:1b.0: >new USB bus registered, assigned bus number 3 Oct 5 15:46:28 taoseeker kernel: [ 2.710961] ohci_hcd 0001:10:1b.0: >irq 63, io mem 0x80082000 Oct 5 15:46:28 taoseeker kernel: [ 2.763314] ata2.00: ATAPI: MATSHITADVD-R UJ-845E, DMP2, max UDMA/66 Oct 5 15:46:28 taoseeker kernel: [ 2.786593] usb usb3: >New USB device found, idVendor=1d6b, idProduct=0001 Oct 5 15:46:28 taoseeker kernel: [ 2.786599] usb usb3: >New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 5 15:46:28 taoseeker kernel: [ 2.786604] usb usb3: >Product: OHCI Host Controller Oct 5 15:46:28 taoseeker kernel: [ 2.786609] usb usb3: >Manufacturer: Linux 3.5.0-17-powerpc-smp ohci_hcd Oct 5 15:46:28 taoseeker kernel: [ 2.786613] usb usb3: >SerialNumber: 0001:10:1b.0 Oct 5 15:46:28 taoseeker kernel: [ 2.786819] hub 3-0:1.0: >USB hub found Oct 5 15:46:28 taoseeker kernel: [ 2.786833] hub 3-0:1.0: >3 ports detected Oct 5 15:46:28 taoseeker kernel: [ 2.786983] ohci_hcd 0001:10:1b.1: >OHCI Host Controller Oct 5 15:46:28 taoseeker kernel: [ 2.786996] ohci_hcd 0001:10:1b.1: >new USB bus registered, assigned bus number 4 Oct 5 15:46:28 taoseeker kernel: [ 2.787025] ohci_hcd 0001:10:1b.1: >irq 63, io mem 0x80081000 Oct 5 15:46:28 taoseeker kernel: [ 2.795285] ata2.00: configured for MWDMA2 Oct 5 15:46:28 taoseeker kernel: [ 2.799719] scsi 1:0:0:0: >CD-ROM MATSHITA DVD-R UJ-845E DMP2 PQ: 0 ANSI: 5 Oct 5 15:46:28 taoseeker kernel: [ 2.801660] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray Oct 5 15:46:28 taoseeker kernel: [ 2.801667] cdrom: Uniform CD-ROM driver Revision: 3.20 Oct 5 15:46:28 taoseeker kernel: [ 2.801891] sr 1:0:0:0: >Attached scsi CD-ROM sr0 Oct 5 15:46:28 taoseeker kernel: [ 2.802009] sr 1:0:0:0: >Attached scsi generic sg1 type 5 Oct 5 15:46:28 taoseeker kernel: [ 2.862519] usb usb4: >New USB device found, idVendor=1d6b, idProduct=0001 Oct 5 15:46:28 taoseeker kernel: [ 2.862526] usb usb4: >New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 5 15:46:28 taoseeker kernel: [ 2.862531] usb usb4: >Product: OHCI Host Controller Oct 5 15:46:28 taoseeker kernel: [ 2.862536] usb usb4: >Manufacturer: Linux 3.5.0-17-powerpc-smp ohci_hcd Oct 5 15:46:28 taoseeker kernel: [ 2.862540] usb usb4: >SerialNumber: 0001:10:1b.1 Oct 5 15:46:28 taoseeker kernel: [ 2.862784] hub 4-0:1.0: >USB hub found Oct 5 15:46:28 taoseeker kernel: [ 2.862798] hub 4-0:1.0: >2 ports detected Oct 5 15:46:28 taoseeker kernel: [ 2.862991] uhci_hcd: USB Universal Host Controller Interface driver Oct 5 15:46:28 taoseeker kernel: [ 2.863196] usbcore: registered new interface driver libusual Oct 5 15:46:28 taoseeker kernel: [ 2.863553] mousedev: PS/2 mouse device common for all mice Oct 5 15:46:28 taoseeker kernel: [ 2.863832] PowerMac i2c bus pmu 2 registered Oct 5 15:46:28 taoseeker kernel: [ 2.863895] PowerMac i2c bus pmu 1 registered Oct 5 15:46:28 taoseeker kernel: [ 2.863953] PowerMac i2c bus mac-io 0 registered Oct 5 15:46:28 taoseeker kernel: [ 2.864092] PowerMac i2c bus uni-n 1 registered Oct 5 15:46:28 taoseeker kernel: [ 2.864149] adt746x: version 1 (supported) Oct 5 15:46:28 taoseeker kernel: [ 2.864153] sensor 0: PWR/MEMORY BOTTOMSIDE Oct 5 15:46:28 taoseeker kernel: [ 2.864157] sensor 1: CPU BOTTOMSIDE Oct 5 15:46:28 taoseeker kernel: [ 2.864160] sensor 2: GPU BOTTOMSIDE Oct 5 15:46:28 taoseeker kernel: [ 2.864591] adt746x: ADT7467 initializing Oct 5 15:46:28 taoseeker kernel: [ 2.866695] adt746x: Lowering max temperatures from 69, 92, 101 to 70, 50, 70 Oct 5 15:46:28 taoseeker kernel: [ 2.868923] device-mapper: uevent: version 1.0.3 Oct 5 15:46:28 taoseeker kernel: [ 2.869094] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com Oct 5 15:46:28 taoseeker kernel: [ 2.869106] cpuidle: using governor ladder Oct 5 15:46:28 taoseeker kernel: [ 2.869109] cpuidle: using governor menu Oct 5 15:46:28 taoseeker kernel: [ 2.869344] ashmem: initialized Oct 5 15:46:28 taoseeker kernel: [ 2.869586] TCP: cubic registered Oct 5 15:46:28 taoseeker kernel: [ 2.869855] NET: Registered protocol family 10 Oct 5 15:46:28 taoseeker kernel: [ 2.870258] NET: Registered protocol family 17 Oct 5 15:46:28 taoseeker kernel: [ 2.870288] Key type dns_resolver registered Oct 5 15:46:28 taoseeker kernel: [ 2.870651] registered taskstats version 1 Oct 5 15:46:28 taoseeker kernel: [ 2.878879] Key type trusted registered Oct 5 15:46:28 taoseeker kernel: [ 2.886187] Key type encrypted registered Oct 5 15:46:28 taoseeker kernel: [ 2.893759] input: PMU as /devices/virtual/input/input2 Oct 5 15:46:28 taoseeker kernel: [ 2.893937] Registered led device: pmu-led::front Oct 5 15:46:28 taoseeker kernel: [ 2.893948] /build/buildd/linux-3.5.0/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) Oct 5 15:46:28 taoseeker kernel: [ 2.894736] Freeing unused kernel memory: 384k freed Oct 5 15:46:28 taoseeker kernel: [ 3.047011] usb 2-1: >new full-speed USB device number 2 using ohci_hcd Oct 5 15:46:28 taoseeker kernel: [ 3.257028] usb 2-1: >New USB device found, idVendor=05ac, idProduct=1000 Oct 5 15:46:28 taoseeker kernel: [ 3.257041] usb 2-1: >New USB device strings: Mfr=0, Product=0, SerialNumber=0 Oct 5 15:46:28 taoseeker kernel: [ 3.347473] b43-pci-bridge 0001:10:12.0: >enabling device (0004 -> 0006) Oct 5 15:46:28 taoseeker kernel: [ 3.367447] ssb: Found chip with id 0x4318, rev 0x02 and package 0x02 Oct 5 15:46:28 taoseeker kernel: [ 3.367463] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x0D, vendor 0x4243) Oct 5 15:46:28 taoseeker kernel: [ 3.367470] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x09, vendor 0x4243) Oct 5 15:46:28 taoseeker kernel: [ 3.367477] ssb: Core 2 found: PCI (cc 0x804, rev 0x0C, vendor 0x4243) Oct 5 15:46:28 taoseeker kernel: [ 3.367484] ssb: Core 3 found: PCMCIA (cc 0x80D, rev 0x07, vendor 0x4243) Oct 5 15:46:28 taoseeker kernel: [ 3.403031] usb 2-2: >new full-speed USB device number 3 using ohci_hcd Oct 5 15:46:28 taoseeker kernel: [ 3.407241] ssb: Sonics Silicon Backplane found on PCI device 0001:10:12.0 Oct 5 15:46:28 taoseeker kernel: [ 3.484347] sungem.c:v1.0 David S. Miller Oct 5 15:46:28 taoseeker kernel: [ 3.484936] gem 0002:20:0f.0: >eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:11:24:d5:aa:bc Oct 5 15:46:28 taoseeker kernel: [ 3.503148] firewire_ohci 0002:20:0e.0: >enabling device (0000 -> 0002) Oct 5 15:46:28 taoseeker kernel: [ 3.559158] firewire_ohci 0002:20:0e.0: >added OHCI v1.10 device as card 0, 8 IR + 8 IT contexts, quirks 0x0 Oct 5 15:46:28 taoseeker kernel: [ 3.579997] usb 2-2: >New USB device found, idVendor=05ac, idProduct=030b Oct 5 15:46:28 taoseeker kernel: [ 3.580009] usb 2-2: >New USB device strings: Mfr=1, Product=2, SerialNumber=0 Oct 5 15:46:28 taoseeker kernel: [ 3.580014] usb 2-2: >Product: Apple Internal Trackpad Oct 5 15:46:28 taoseeker kernel: [ 3.580019] usb 2-2: >Manufacturer: Apple Computer Oct 5 15:46:28 taoseeker kernel: [ 3.701484] EXT4-fs (sda3): INFO: recovery required on readonly filesystem Oct 5 15:46:28 taoseeker kernel: [ 3.701500] EXT4-fs (sda3): write access will be enabled during recovery Oct 5 15:46:28 taoseeker kernel: [ 3.779684] usbcore: registered new interface driver usbhid Oct 5 15:46:28 taoseeker kernel: [ 3.779694] usbhid: USB HID core driver Oct 5 15:46:28 taoseeker kernel: [ 3.797889] input: HID 05ac:1000 as /devices/pci0001:10/0001:10:1a.0/usb2/2-1/2-1:1.0/input/input3 Oct 5 15:46:28 taoseeker kernel: [ 3.798447] hid-generic 0003:05AC:1000.0001: >input,hidraw0: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0001:10:1a.0-1/input0 Oct 5 15:46:28 taoseeker kernel: [ 3.801697] input: HID 05ac:1000 as /devices/pci0001:10/0001:10:1a.0/usb2/2-1/2-1:1.1/input/input4 Oct 5 15:46:28 taoseeker kernel: [ 3.802356] hid-generic 0003:05AC:1000.0002: >input,hidraw1: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0001:10:1a.0-1/input1 Oct 5 15:46:28 taoseeker kernel: [ 4.059204] firewire_core 0002:20:0e.0: created device fw0: GUID 001124fffed5aabc, S400 Oct 5 15:46:28 taoseeker kernel: [ 5.230446] EXT4-fs (sda3): recovery complete Oct 5 15:46:28 taoseeker kernel: [ 5.245160] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) Oct 5 15:46:28 taoseeker kernel: [ 10.165788] Adding 2439064k swap on /dev/sda4. Priority:-1 extents:1 across:2439064k Oct 5 15:46:28 taoseeker kernel: [ 10.230154] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Oct 5 15:46:28 taoseeker kernel: [ 10.316962] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro Oct 5 15:46:28 taoseeker kernel: [ 10.902528] agpgart-uninorth 0000:00:0b.0: >Apple UniNorth 2 chipset Oct 5 15:46:28 taoseeker kernel: [ 10.923675] snd-powermac no longer handles any machines with a layout-id property in the device-tree, use snd-aoa. Oct 5 15:46:28 taoseeker kernel: [ 10.956662] agpgart-uninorth 0000:00:0b.0: >configuring for size idx: 64 Oct 5 15:46:28 taoseeker kernel: [ 10.971058] agpgart-uninorth 0000:00:0b.0: >AGP aperture is 256M @ 0x0 Oct 5 15:46:28 taoseeker kernel: [ 10.972022] apm_emu: PMU APM Emulation initialized. Oct 5 15:46:28 taoseeker kernel: [ 11.757111] cfg80211: Calling CRDA to update world regulatory domain Oct 5 15:46:28 taoseeker kernel: [ 11.895842] appletouch 2-2:1.0: >Geyser mode initialized. Oct 5 15:46:28 taoseeker kernel: [ 11.896240] input: appletouch as /devices/pci0001:10/0001:10:1a.0/usb2/2-2/2-2:1.0/input/input5 Oct 5 15:46:28 taoseeker kernel: [ 11.896797] usbcore: registered new interface driver appletouch Oct 5 15:46:28 taoseeker kernel: [ 11.990896] usb 2-1: >USB disconnect, device number 2 Oct 5 15:46:28 taoseeker kernel: [ 11.994140] usb 2-1: >usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -62 Oct 5 15:46:28 taoseeker kernel: [ 12.243350] rtc-generic rtc-generic: >rtc core: registered rtc-generic as rtc0 Oct 5 15:46:28 taoseeker kernel: [ 12.327016] usb 2-1: >new full-speed USB device number 4 using ohci_hcd Oct 5 15:46:28 taoseeker kernel: [ 12.335470] b43-phy0: Broadcom 4318 WLAN found (core revision 9) Oct 5 15:46:28 taoseeker kernel: [ 12.340832] ams: Found I2C based motion sensor Oct 5 15:46:28 taoseeker kernel: [ 12.407511] Broadcom 43xx driver loaded [ Features: PNL ] Oct 5 15:46:28 taoseeker kernel: [ 12.686024] usb 2-1: >New USB device found, idVendor=05ac, idProduct=8207 Oct 5 15:46:28 taoseeker kernel: [ 12.686037] usb 2-1: >New USB device strings: Mfr=0, Product=0, SerialNumber=0 Oct 5 15:46:28 taoseeker kernel: [ 12.758421] type=1400 audit(1349444788.736:2): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=513 comm="apparmor_parser" Oct 5 15:46:28 taoseeker kernel: [ 12.941163] lp: driver loaded but no devices found Oct 5 15:46:29 taoseeker kernel: [ 13.047164] ppdev: user-space parallel port driver Oct 5 15:46:29 taoseeker kernel: [ 13.618621] Bluetooth: Core ver 2.16 Oct 5 15:46:29 taoseeker kernel: [ 13.625274] NET: Registered protocol family 31 Oct 5 15:46:29 taoseeker kernel: [ 13.625289] Bluetooth: HCI device and connection manager initialized Oct 5 15:46:29 taoseeker kernel: [ 13.625296] Bluetooth: HCI socket layer initialized Oct 5 15:46:29 taoseeker kernel: [ 13.625300] Bluetooth: L2CAP socket layer initialized Oct 5 15:46:29 taoseeker kernel: [ 13.625330] Bluetooth: SCO socket layer initialized Oct 5 15:46:29 taoseeker kernel: [ 13.660848] type=1400 audit(1349444789.640:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=616 comm="apparmor_parser" Oct 5 15:46:29 taoseeker kernel: [ 13.665486] type=1400 audit(1349444789.644:4): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=616 comm="apparmor_parser" Oct 5 15:46:29 taoseeker kernel: [ 13.698606] Bluetooth: RFCOMM TTY layer initialized Oct 5 15:46:29 taoseeker kernel: [ 13.698640] Bluetooth: RFCOMM socket layer initialized Oct 5 15:46:29 taoseeker kernel: [ 13.698644] Bluetooth: RFCOMM ver 1.11 Oct 5 15:46:29 taoseeker kernel: [ 13.786484] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Oct 5 15:46:29 taoseeker kernel: [ 13.786495] Bluetooth: BNEP filters: protocol multicast Oct 5 15:46:29 taoseeker kernel: [ 13.871843] input: Macintosh mouse button emulation as /devices/virtual/input/input6 Oct 5 15:46:30 taoseeker kernel: [ 14.124548] usbcore: registered new interface driver btusb Oct 5 15:46:30 taoseeker kernel: [ 14.229394] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: Oct 5 15:46:30 taoseeker kernel: [ 14.229405] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) Oct 5 15:46:30 taoseeker kernel: [ 14.229410] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: Oct 5 15:46:30 taoseeker kernel: [ 14.229414] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) Oct 5 15:46:30 taoseeker kernel: [ 14.229417] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: Oct 5 15:46:30 taoseeker kernel: [ 14.229421] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) Oct 5 15:46:30 taoseeker kernel: [ 14.229425] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: Oct 5 15:46:30 taoseeker kernel: [ 14.229429] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) Oct 5 15:46:30 taoseeker kernel: [ 14.229433] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: Oct 5 15:46:30 taoseeker kernel: [ 14.229437] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) Oct 5 15:46:30 taoseeker kernel: [ 14.229441] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: Oct 5 15:46:30 taoseeker kernel: [ 14.229444] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) Oct 5 15:46:30 taoseeker kernel: [ 14.229448] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: Oct 5 15:46:30 taoseeker kernel: [ 14.229452] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) Oct 5 15:46:30 taoseeker kernel: [ 14.229456] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: Oct 5 15:46:30 taoseeker kernel: [ 14.229460] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) Oct 5 15:46:30 taoseeker kernel: [ 14.229464] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: Oct 5 15:46:30 taoseeker kernel: [ 14.229468] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) Oct 5 15:46:30 taoseeker kernel: [ 14.229472] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: Oct 5 15:46:30 taoseeker kernel: [ 14.229475] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) Oct 5 15:46:30 taoseeker kernel: [ 14.229479] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: Oct 5 15:46:30 taoseeker kernel: [ 14.229483] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) Oct 5 15:46:30 taoseeker kernel: [ 14.229487] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: Oct 5 15:46:30 taoseeker kernel: [ 14.229491] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (600 mBi, 2000 mBm) Oct 5 15:46:30 taoseeker kernel: [ 14.229495] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: Oct 5 15:46:30 taoseeker kernel: [ 14.229499] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (600 mBi, 2000 mBm) Oct 5 15:46:30 taoseeker kernel: [ 14.229503] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule: Oct 5 15:46:30 taoseeker kernel: [ 14.229507] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (600 mBi, 2000 mBm) Oct 5 15:46:30 taoseeker kernel: [ 14.465894] ieee80211 phy0: >Selected rate control algorithm 'minstrel_ht' Oct 5 15:46:30 taoseeker kernel: [ 14.466672] Registered led device: b43-phy0::tx Oct 5 15:46:30 taoseeker kernel: [ 14.466715] Registered led device: b43-phy0::rx Oct 5 15:46:30 taoseeker kernel: [ 14.466753] Registered led device: b43-phy0::radio Oct 5 15:46:31 taoseeker modem-manager[673]: ModemManager (version 0.5.999) starting... Oct 5 15:46:32 taoseeker kernel: [ 16.369408] type=1400 audit(1349444792.348:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=731 comm="apparmor_parser" Oct 5 15:46:32 taoseeker kernel: [ 16.370114] type=1400 audit(1349444792.348:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=731 comm="apparmor_parser" Oct 5 15:46:32 taoseeker kernel: [ 16.560888] type=1400 audit(1349444792.540:7): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=733 comm="apparmor_parser" Oct 5 15:46:32 taoseeker kernel: [ 16.561802] type=1400 audit(1349444792.540:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=733 comm="apparmor_parser" Oct 5 15:46:32 taoseeker kernel: [ 16.562280] type=1400 audit(1349444792.540:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=733 comm="apparmor_parser" Oct 5 15:46:33 taoseeker NetworkManager[737]: NetworkManager (version 0.9.6.0) is starting... Oct 5 15:46:33 taoseeker NetworkManager[737]: Read config file /etc/NetworkManager/NetworkManager.conf Oct 5 15:46:33 taoseeker NetworkManager[737]: WEXT support is enabled Oct 5 15:46:33 taoseeker modem-manager[673]: Loaded plugin 'Wavecom' Oct 5 15:46:33 taoseeker modem-manager[673]: Loaded plugin 'Ericsson MBM' Oct 5 15:46:33 taoseeker modem-manager[673]: Loaded plugin 'SimTech' Oct 5 15:46:33 taoseeker modem-manager[673]: Loaded plugin 'Novatel' Oct 5 15:46:33 taoseeker modem-manager[673]: Loaded plugin 'Nokia' Oct 5 15:46:33 taoseeker modem-manager[673]: Loaded plugin 'AnyData' Oct 5 15:46:33 taoseeker modem-manager[673]: Loaded plugin 'MotoC' Oct 5 15:46:33 taoseeker modem-manager[673]: Loaded plugin 'Option High-Speed' Oct 5 15:46:33 taoseeker modem-manager[673]: Loaded plugin 'X22X' Oct 5 15:46:33 taoseeker modem-manager[673]: Loaded plugin 'Linktop' Oct 5 15:46:33 taoseeker modem-manager[673]: Loaded plugin 'Longcheer' Oct 5 15:46:33 taoseeker modem-manager[673]: Loaded plugin 'Sierra' Oct 5 15:46:33 taoseeker modem-manager[673]: Loaded plugin 'Option' Oct 5 15:46:33 taoseeker modem-manager[673]: Loaded plugin 'Gobi' Oct 5 15:46:33 taoseeker modem-manager[673]: Loaded plugin 'Samsung' Oct 5 15:46:33 taoseeker modem-manager[673]: Loaded plugin 'Huawei' Oct 5 15:46:33 taoseeker modem-manager[673]: Loaded plugin 'ZTE' Oct 5 15:46:33 taoseeker modem-manager[673]: Loaded plugin 'Cinterion' Oct 5 15:46:33 taoseeker modem-manager[673]: Loaded plugin 'Iridium' Oct 5 15:46:33 taoseeker modem-manager[673]: Loaded plugin 'Generic' Oct 5 15:46:33 taoseeker modem-manager[673]: Successfully loaded 20 plugins Oct 5 15:46:33 taoseeker modem-manager[673]: (ttyPZ1) opening serial port... Oct 5 15:46:33 taoseeker modem-manager[673]: (ttyPZ1): port attributes not fully set Oct 5 15:46:33 taoseeker modem-manager[673]: (ttyPZ0) opening serial port... Oct 5 15:46:33 taoseeker modem-manager[673]: (ttyPZ0): port attributes not fully set Oct 5 15:46:33 taoseeker kernel: [ 17.997551] type=1400 audit(1349444793.976:10): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=734 comm="apparmor_parser" Oct 5 15:46:33 taoseeker kernel: [ 18.009929] type=1400 audit(1349444793.988:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//sanitized_helper" pid=734 comm="apparmor_parser" Oct 5 15:46:34 taoseeker NetworkManager[737]: DNS: loaded plugin dnsmasq Oct 5 15:46:36 taoseeker NetworkManager[737]: SCPlugin-Ifupdown: init! Oct 5 15:46:36 taoseeker NetworkManager[737]: SCPlugin-Ifupdown: update_system_hostname Oct 5 15:46:36 taoseeker NetworkManager[737]: SCPluginIfupdown: management mode: unmanaged Oct 5 15:46:36 taoseeker NetworkManager[737]: SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0001:10/0001:10:12.0/ssb0:0/net/wlan2, iface: wlan2) Oct 5 15:46:36 taoseeker NetworkManager[737]: SCPlugin-Ifupdown: device added (path: /sys/devices/pci0001:10/0001:10:12.0/ssb0:0/net/wlan2, iface: wlan2): no ifupdown configuration found. Oct 5 15:46:36 taoseeker NetworkManager[737]: SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0002:20/0002:20:0f.0/net/eth0, iface: eth0) Oct 5 15:46:36 taoseeker NetworkManager[737]: SCPlugin-Ifupdown: device added (path: /sys/devices/pci0002:20/0002:20:0f.0/net/eth0, iface: eth0): no ifupdown configuration found. Oct 5 15:46:36 taoseeker NetworkManager[737]: SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/lo, iface: lo) Oct 5 15:46:36 taoseeker NetworkManager[737]: SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/lo, iface: lo): no ifupdown configuration found. Oct 5 15:46:36 taoseeker NetworkManager[737]: SCPlugin-Ifupdown: end _init. Oct 5 15:46:36 taoseeker NetworkManager[737]: Loaded plugin ifupdown: (C) 2008 Canonical Ltd. To report bugs please use the NetworkManager mailing list. Oct 5 15:46:36 taoseeker NetworkManager[737]: Loaded plugin keyfile: (c) 2007 - 2010 Red Hat, Inc. To report bugs please use the NetworkManager mailing list. Oct 5 15:46:36 taoseeker NetworkManager[737]: Ifupdown: get unmanaged devices count: 0 Oct 5 15:46:36 taoseeker NetworkManager[737]: SCPlugin-Ifupdown: (275817888) ... get_connections. Oct 5 15:46:36 taoseeker NetworkManager[737]: SCPlugin-Ifupdown: (275817888) ... get_connections (managed=false): return empty list. Oct 5 15:46:36 taoseeker NetworkManager[737]: keyfile: parsing Auto Ethernet ... Oct 5 15:46:36 taoseeker NetworkManager[737]: keyfile: read connection 'Auto Ethernet' Oct 5 15:46:36 taoseeker NetworkManager[737]: keyfile: parsing Telenor6904ett ... Oct 5 15:46:36 taoseeker NetworkManager[737]: keyfile: read connection 'Telenor6904ett' Oct 5 15:46:36 taoseeker NetworkManager[737]: Ifupdown: get unmanaged devices count: 0 Oct 5 15:46:36 taoseeker NetworkManager[737]: modem-manager is now available Oct 5 15:46:36 taoseeker NetworkManager[737]: monitoring kernel firmware directory '/lib/firmware'. Oct 5 15:46:37 taoseeker NetworkManager[737]: found WiFi radio killswitch rfkill1 (at /sys/devices/pci0001:10/0001:10:12.0/ssb0:0/ieee80211/phy0/rfkill1) (driver (unknown)) Oct 5 15:46:37 taoseeker NetworkManager[737]: WiFi enabled by radio killswitch; enabled by state file Oct 5 15:46:37 taoseeker NetworkManager[737]: WWAN enabled by radio killswitch; enabled by state file Oct 5 15:46:37 taoseeker NetworkManager[737]: WiMAX enabled by radio killswitch; enabled by state file Oct 5 15:46:37 taoseeker NetworkManager[737]: Networking is enabled by state file Oct 5 15:46:37 taoseeker NetworkManager[737]: (wlan2): using nl80211 for WiFi device control Oct 5 15:46:37 taoseeker NetworkManager[737]: (wlan2): driver supports Access Point (AP) mode Oct 5 15:46:37 taoseeker NetworkManager[737]: (wlan2): new 802.11 WiFi device (driver: 'b43' ifindex: 3) Oct 5 15:46:37 taoseeker NetworkManager[737]: (wlan2): exported as /org/freedesktop/NetworkManager/Devices/0 Oct 5 15:46:37 taoseeker NetworkManager[737]: (wlan2): now managed Oct 5 15:46:37 taoseeker NetworkManager[737]: (wlan2): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2] Oct 5 15:46:37 taoseeker NetworkManager[737]: (wlan2): bringing up device. Oct 5 15:46:37 taoseeker kernel: [ 21.327036] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07) Oct 5 15:46:37 taoseeker NetworkManager[737]: (wlan2): preparing device. Oct 5 15:46:37 taoseeker kernel: [ 21.380100] IPv6: ADDRCONF(NETDEV_UP): wlan2: link is not ready Oct 5 15:46:37 taoseeker NetworkManager[737]: (wlan2): deactivating device (reason 'managed') [2] Oct 5 15:46:37 taoseeker kernel: [ 21.383859] IPv6: ADDRCONF(NETDEV_UP): wlan2: link is not ready Oct 5 15:46:37 taoseeker NetworkManager[737]: failed to allocate link cache: (-10) Operation not supported Oct 5 15:46:37 taoseeker NetworkManager[737]: (eth0): carrier is OFF Oct 5 15:46:37 taoseeker NetworkManager[737]: [1349444797.387191] [nm-device-ethernet.c:456] real_update_permanent_hw_address(): (eth0): unable to read permanent MAC address (error 0) Oct 5 15:46:37 taoseeker NetworkManager[737]: (eth0): new Ethernet device (driver: 'gem' ifindex: 2) Oct 5 15:46:37 taoseeker NetworkManager[737]: (eth0): exported as /org/freedesktop/NetworkManager/Devices/1 Oct 5 15:46:37 taoseeker NetworkManager[737]: (eth0): now managed Oct 5 15:46:37 taoseeker NetworkManager[737]: (eth0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2] Oct 5 15:46:37 taoseeker NetworkManager[737]: (eth0): bringing up device. Oct 5 15:46:37 taoseeker NetworkManager[737]: (eth0): preparing device. Oct 5 15:46:37 taoseeker kernel: [ 21.699385] sungem_phy: PHY ID: 4061e4, addr: 0 Oct 5 15:46:37 taoseeker kernel: [ 21.699742] gem 0002:20:0f.0: >eth0: Found BCM5221 PHY Oct 5 15:46:37 taoseeker kernel: [ 21.700512] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Oct 5 15:46:37 taoseeker NetworkManager[737]: (eth0): deactivating device (reason 'managed') [2] Oct 5 15:46:37 taoseeker kernel: [ 21.706351] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Oct 5 15:46:37 taoseeker NetworkManager[737]: /sys/devices/virtual/net/lo: couldn't determine device driver; ignoring... Oct 5 15:46:37 taoseeker NetworkManager[737]: /sys/devices/virtual/net/lo: couldn't determine device driver; ignoring... Oct 5 15:46:38 taoseeker NetworkManager[737]: wpa_supplicant started Oct 5 15:46:38 taoseeker NetworkManager[737]: (wlan2) supports 4 scan SSIDs Oct 5 15:46:38 taoseeker NetworkManager[737]: (wlan2): supplicant interface state: starting -> ready Oct 5 15:46:38 taoseeker NetworkManager[737]: (wlan2): device state change: unavailable -> disconnected (reason 'supplicant-available') [20 30 42] Oct 5 15:46:38 taoseeker NetworkManager[737]: Trying to remove a non-existant call id. Oct 5 15:46:38 taoseeker NetworkManager[737]: (wlan2): supplicant interface state: ready -> inactive Oct 5 15:46:38 taoseeker NetworkManager[737]: (wlan2) supports 4 scan SSIDs Oct 5 15:46:39 taoseeker NetworkManager[737]: Auto-activating connection 'Telenor6904ett'. Oct 5 15:46:39 taoseeker NetworkManager[737]: Activation (wlan2) starting connection 'Telenor6904ett' Oct 5 15:46:39 taoseeker NetworkManager[737]: (wlan2): device state change: disconnected -> prepare (reason 'none') [30 40 0] Oct 5 15:46:39 taoseeker NetworkManager[737]: Activation (wlan2) Stage 1 of 5 (Device Prepare) scheduled... Oct 5 15:46:39 taoseeker NetworkManager[737]: Activation (wlan2) Stage 1 of 5 (Device Prepare) started... Oct 5 15:46:39 taoseeker NetworkManager[737]: Activation (wlan2) Stage 2 of 5 (Device Configure) scheduled... Oct 5 15:46:39 taoseeker NetworkManager[737]: Activation (wlan2) Stage 1 of 5 (Device Prepare) complete. Oct 5 15:46:39 taoseeker NetworkManager[737]: Activation (wlan2) Stage 2 of 5 (Device Configure) starting... Oct 5 15:46:39 taoseeker NetworkManager[737]: (wlan2): device state change: prepare -> config (reason 'none') [40 50 0] Oct 5 15:46:39 taoseeker NetworkManager[737]: Activation (wlan2/wireless): connection 'Telenor6904ett' has security, and secrets exist. No new secrets needed. Oct 5 15:46:39 taoseeker NetworkManager[737]: Config: added 'ssid' value 'Telenor6904ett' Oct 5 15:46:39 taoseeker NetworkManager[737]: Config: added 'scan_ssid' value '1' Oct 5 15:46:39 taoseeker NetworkManager[737]: Config: added 'key_mgmt' value 'WPA-PSK' Oct 5 15:46:39 taoseeker NetworkManager[737]: Config: added 'auth_alg' value 'OPEN' Oct 5 15:46:39 taoseeker NetworkManager[737]: Config: added 'psk' value '' Oct 5 15:46:39 taoseeker NetworkManager[737]: Activation (wlan2) Stage 2 of 5 (Device Configure) complete. Oct 5 15:46:39 taoseeker NetworkManager[737]: Config: set interface ap_scan to 1 Oct 5 15:46:39 taoseeker NetworkManager[737]: (wlan2): supplicant interface state: inactive -> scanning Oct 5 15:46:40 taoseeker wpa_supplicant[985]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 15:46:40 taoseeker kernel: [ 24.850182] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 15:46:40 taoseeker NetworkManager[737]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 15:46:40 taoseeker kernel: [ 24.871180] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 15:46:41 taoseeker kernel: [ 25.074901] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 15:46:41 taoseeker kernel: [ 25.278903] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 15:46:41 taoseeker kernel: [ 25.482961] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 15:46:41 taoseeker NetworkManager[737]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 15:46:41 taoseeker NetworkManager[737]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 15:46:42 taoseeker wpa_supplicant[985]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 15:46:42 taoseeker kernel: [ 26.740126] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 15:46:42 taoseeker kernel: [ 26.751256] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 15:46:42 taoseeker NetworkManager[737]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 15:46:42 taoseeker kernel: [ 26.954883] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 15:46:43 taoseeker kernel: [ 27.158900] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 15:46:43 taoseeker kernel: [ 27.162213] wlan2: authenticated Oct 5 15:46:43 taoseeker kernel: [ 27.162903] wlan2: associating with AP with corrupt beacon Oct 5 15:46:43 taoseeker wpa_supplicant[985]: wlan2: Trying to associate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 15:46:43 taoseeker kernel: [ 27.163460] wlan2: associate with 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 15:46:43 taoseeker NetworkManager[737]: (wlan2): supplicant interface state: authenticating -> associating Oct 5 15:46:43 taoseeker wpa_supplicant[985]: wlan2: Associated with 50:67:f0:d3:ed:c4 Oct 5 15:46:43 taoseeker kernel: [ 27.171244] wlan2: RX AssocResp from 50:67:f0:d3:ed:c4 (capab=0xc11 status=0 aid=1) Oct 5 15:46:43 taoseeker kernel: [ 27.171764] wlan2: associated Oct 5 15:46:43 taoseeker kernel: [ 27.172343] IPv6: ADDRCONF(NETDEV_CHANGE): wlan2: link becomes ready Oct 5 15:46:43 taoseeker kernel: [ 27.172528] cfg80211: Pending regulatory request, waiting for it to be processed... Oct 5 15:46:43 taoseeker NetworkManager[737]: (wlan2): supplicant interface state: associating -> associated Oct 5 15:46:44 taoseeker NetworkManager[737]: (wlan2): supplicant interface state: associated -> 4-way handshake Oct 5 15:46:44 taoseeker wpa_supplicant[985]: wlan2: WPA: Key negotiation completed with 50:67:f0:d3:ed:c4 [PTK=CCMP GTK=CCMP] Oct 5 15:46:44 taoseeker wpa_supplicant[985]: wlan2: CTRL-EVENT-CONNECTED - Connection to 50:67:f0:d3:ed:c4 completed (auth) [id=0 id_str=] Oct 5 15:46:44 taoseeker NetworkManager[737]: (wlan2): supplicant interface state: 4-way handshake -> completed Oct 5 15:46:44 taoseeker NetworkManager[737]: Activation (wlan2/wireless) Stage 2 of 5 (Device Configure) successful. Connected to wireless network 'Telenor6904ett'. Oct 5 15:46:44 taoseeker NetworkManager[737]: Activation (wlan2) Stage 3 of 5 (IP Configure Start) scheduled. Oct 5 15:46:44 taoseeker NetworkManager[737]: Activation (wlan2) Stage 3 of 5 (IP Configure Start) started... Oct 5 15:46:44 taoseeker NetworkManager[737]: (wlan2): device state change: config -> ip-config (reason 'none') [50 70 0] Oct 5 15:46:44 taoseeker NetworkManager[737]: Activation (wlan2) Beginning DHCPv4 transaction (timeout in 45 seconds) Oct 5 15:46:44 taoseeker NetworkManager[737]: dhclient started with pid 1165 Oct 5 15:46:44 taoseeker NetworkManager[737]: Activation (wlan2) Beginning IP6 addrconf. Oct 5 15:46:44 taoseeker NetworkManager[737]: Activation (wlan2) Stage 3 of 5 (IP Configure Start) complete. Oct 5 15:46:45 taoseeker dhclient: Internet Systems Consortium DHCP Client 4.2.4 Oct 5 15:46:45 taoseeker dhclient: Copyright 2004-2012 Internet Systems Consortium. Oct 5 15:46:45 taoseeker dhclient: All rights reserved. Oct 5 15:46:45 taoseeker dhclient: For info, please visit https://www.isc.org/software/dhcp/ Oct 5 15:46:45 taoseeker dhclient: Oct 5 15:46:45 taoseeker dhclient: Listening on LPF/wlan2/00:14:51:81:6a:17 Oct 5 15:46:45 taoseeker NetworkManager[737]: (wlan2): DHCPv4 state changed nbi -> preinit Oct 5 15:46:45 taoseeker dhclient: Sending on LPF/wlan2/00:14:51:81:6a:17 Oct 5 15:46:45 taoseeker dhclient: Sending on Socket/fallback Oct 5 15:46:45 taoseeker dhclient: DHCPREQUEST of 10.0.0.66 on wlan2 to 255.255.255.255 port 67 Oct 5 15:46:45 taoseeker dhclient: DHCPACK of 10.0.0.66 from 10.0.0.138 Oct 5 15:46:45 taoseeker dhclient: bound to 10.0.0.66 -- renewal in 35831 seconds. Oct 5 15:46:45 taoseeker NetworkManager[737]: (wlan2): DHCPv4 state changed preinit -> reboot Oct 5 15:46:45 taoseeker NetworkManager[737]: address 10.0.0.66 Oct 5 15:46:45 taoseeker NetworkManager[737]: prefix 24 (255.255.255.0) Oct 5 15:46:45 taoseeker NetworkManager[737]: gateway 10.0.0.138 Oct 5 15:46:45 taoseeker NetworkManager[737]: hostname 'taoseeker' Oct 5 15:46:45 taoseeker NetworkManager[737]: nameserver '130.67.15.198' Oct 5 15:46:45 taoseeker NetworkManager[737]: nameserver '193.213.112.4' Oct 5 15:46:45 taoseeker NetworkManager[737]: nameserver '10.0.0.138' Oct 5 15:46:45 taoseeker NetworkManager[737]: domain name 'lan' Oct 5 15:46:45 taoseeker NetworkManager[737]: Activation (wlan2) Stage 5 of 5 (IPv4 Configure Commit) scheduled... Oct 5 15:46:45 taoseeker NetworkManager[737]: Activation (wlan2) Stage 5 of 5 (IPv4 Commit) started... Oct 5 15:46:46 taoseeker modem-manager[673]: (ttyPZ1) closing serial port... Oct 5 15:46:46 taoseeker modem-manager[673]: (ttyPZ1) serial port closed Oct 5 15:46:46 taoseeker modem-manager[673]: (ttyPZ1) opening serial port... Oct 5 15:46:46 taoseeker modem-manager[673]: (ttyPZ0) closing serial port... Oct 5 15:46:46 taoseeker modem-manager[673]: (ttyPZ0) serial port closed Oct 5 15:46:46 taoseeker modem-manager[673]: (ttyPZ0) opening serial port... Oct 5 15:46:46 taoseeker NetworkManager[737]: (wlan2): device state change: ip-config -> activated (reason 'none') [70 100 0] Oct 5 15:46:47 taoseeker NetworkManager[737]: DNS: starting dnsmasq... Oct 5 15:46:47 taoseeker NetworkManager[737]: [1349444807.499376] [nm-dns-dnsmasq.c:390] update(): dnsmasq not available on the bus, can't update servers. Oct 5 15:46:47 taoseeker NetworkManager[737]: [1349444807.499862] [nm-dns-dnsmasq.c:392] update(): dnsmasq owner not found on bus: Could not get owner of name 'org.freedesktop.NetworkManager.dnsmasq': no such name Oct 5 15:46:47 taoseeker NetworkManager[737]: DNS: plugin dnsmasq update failed Oct 5 15:46:47 taoseeker NetworkManager[737]: ((null)): writing resolv.conf to /sbin/resolvconf Oct 5 15:46:47 taoseeker NetworkManager[737]: Policy set 'Telenor6904ett' (wlan2) as default for IPv4 routing and DNS. Oct 5 15:46:47 taoseeker NetworkManager[737]: Activation (wlan2) successful, device activated. Oct 5 15:46:47 taoseeker NetworkManager[737]: Activation (wlan2) Stage 5 of 5 (IPv4 Commit) complete. Oct 5 15:46:47 taoseeker NetworkManager[737]: dnsmasq appeared on DBus: :1.18 Oct 5 15:46:47 taoseeker NetworkManager[737]: ((null)): writing resolv.conf to /sbin/resolvconf Oct 5 15:46:52 taoseeker modem-manager[673]: (ttyPZ1) closing serial port... Oct 5 15:46:52 taoseeker modem-manager[673]: (ttyPZ1) serial port closed Oct 5 15:46:52 taoseeker modem-manager[673]: (ttyPZ0) closing serial port... Oct 5 15:46:52 taoseeker modem-manager[673]: (ttyPZ0) serial port closed Oct 5 15:46:52 taoseeker modem-manager[673]: (ttyPZ1) opening serial port... Oct 5 15:46:52 taoseeker modem-manager[673]: (ttyPZ1): port attributes not fully set Oct 5 15:46:52 taoseeker modem-manager[673]: (ttyPZ0) opening serial port... Oct 5 15:46:52 taoseeker modem-manager[673]: (ttyPZ0): port attributes not fully set Oct 5 15:47:04 taoseeker modem-manager[673]: (ttyPZ1) closing serial port... Oct 5 15:47:04 taoseeker NetworkManager[737]: (wlan2): IP6 addrconf timed out or failed. Oct 5 15:47:04 taoseeker NetworkManager[737]: Activation (wlan2) Stage 4 of 5 (IPv6 Configure Timeout) scheduled... Oct 5 15:47:04 taoseeker NetworkManager[737]: Activation (wlan2) Stage 4 of 5 (IPv6 Configure Timeout) started... Oct 5 15:47:04 taoseeker NetworkManager[737]: Activation (wlan2) Stage 4 of 5 (IPv6 Configure Timeout) complete. Oct 5 15:47:04 taoseeker modem-manager[673]: (ttyPZ1) serial port closed Oct 5 15:47:04 taoseeker modem-manager[673]: (ttyPZ1) opening serial port... Oct 5 15:47:04 taoseeker modem-manager[673]: (ttyPZ0) closing serial port... Oct 5 15:47:04 taoseeker modem-manager[673]: (ttyPZ0) serial port closed Oct 5 15:47:04 taoseeker modem-manager[673]: (ttyPZ0) opening serial port... Oct 5 15:47:10 taoseeker modem-manager[673]: (ttyPZ1) closing serial port... Oct 5 15:47:10 taoseeker modem-manager[673]: (ttyPZ1) serial port closed Oct 5 15:47:10 taoseeker modem-manager[673]: (ttyPZ0) closing serial port... Oct 5 15:47:10 taoseeker modem-manager[673]: (ttyPZ0) serial port closed Oct 5 15:47:38 taoseeker kernel: [ 82.725468] ondemand governor failed, too long transition latency of HW, fallback to performance governor Oct 5 15:50:11 taoseeker wpa_supplicant[985]: wlan2: CTRL-EVENT-DISCONNECTED bssid=50:67:f0:d3:ed:c4 reason=4 Oct 5 15:50:11 taoseeker kernel: [ 235.238148] ieee80211 phy0: >wlan2: No probe response from AP 50:67:f0:d3:ed:c4 after 500ms, disconnecting. Oct 5 15:50:11 taoseeker kernel: [ 235.242938] cfg80211: All devices are disconnected, going to restore regulatory settings Oct 5 15:50:11 taoseeker kernel: [ 235.242955] cfg80211: Restoring regulatory settings Oct 5 15:50:11 taoseeker kernel: [ 235.242969] cfg80211: Calling CRDA for country: NO Oct 5 15:50:11 taoseeker NetworkManager[737]: (wlan2): supplicant interface state: completed -> disconnected Oct 5 15:50:11 taoseeker NetworkManager[737]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 15:50:12 taoseeker wpa_supplicant[985]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 15:50:12 taoseeker kernel: [ 236.494636] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 15:50:12 taoseeker NetworkManager[737]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 15:50:12 taoseeker kernel: [ 236.505818] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 15:50:12 taoseeker kernel: [ 236.709348] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 15:50:12 taoseeker wpa_supplicant[985]: wlan2: Trying to associate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 15:50:12 taoseeker kernel: [ 236.913246] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 15:50:12 taoseeker kernel: [ 236.914688] wlan2: authenticated Oct 5 15:50:12 taoseeker kernel: [ 236.915294] wlan2: associating with AP with corrupt beacon Oct 5 15:50:12 taoseeker kernel: [ 236.917279] wlan2: associate with 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 15:50:13 taoseeker kernel: [ 236.919715] wlan2: RX AssocResp from 50:67:f0:d3:ed:c4 (capab=0xc11 status=0 aid=1) Oct 5 15:50:13 taoseeker kernel: [ 236.920464] wlan2: associated Oct 5 15:50:13 taoseeker wpa_supplicant[985]: wlan2: Associated with 50:67:f0:d3:ed:c4 Oct 5 15:50:13 taoseeker NetworkManager[737]: (wlan2): supplicant interface state: authenticating -> associating Oct 5 15:50:13 taoseeker NetworkManager[737]: (wlan2): supplicant interface state: associating -> associated Oct 5 15:50:13 taoseeker NetworkManager[737]: (wlan2): supplicant interface state: associated -> 4-way handshake Oct 5 15:50:13 taoseeker wpa_supplicant[985]: wlan2: WPA: Key negotiation completed with 50:67:f0:d3:ed:c4 [PTK=CCMP GTK=CCMP] Oct 5 15:50:13 taoseeker wpa_supplicant[985]: wlan2: CTRL-EVENT-CONNECTED - Connection to 50:67:f0:d3:ed:c4 completed (reauth) [id=0 id_str=] Oct 5 15:50:13 taoseeker NetworkManager[737]: (wlan2): supplicant interface state: 4-way handshake -> completed Oct 5 15:54:52 taoseeker wpa_supplicant[985]: wlan2: WPA: Group rekeying completed with 50:67:f0:d3:ed:c4 [GTK=CCMP] Oct 5 15:57:44 taoseeker NetworkManager[737]: nl_recvmsgs() error: (-33) Dump inconsistency detected, interrupted Oct 5 15:58:04 taoseeker wpa_supplicant[985]: wlan2: CTRL-EVENT-DISCONNECTED bssid=50:67:f0:d3:ed:c4 reason=4 Oct 5 15:58:04 taoseeker kernel: [ 708.269927] ieee80211 phy0: >wlan2: No probe response from AP 50:67:f0:d3:ed:c4 after 500ms, disconnecting. Oct 5 15:58:04 taoseeker kernel: [ 708.272006] cfg80211: All devices are disconnected, going to restore regulatory settings Oct 5 15:58:04 taoseeker kernel: [ 708.272021] cfg80211: Restoring regulatory settings Oct 5 15:58:04 taoseeker kernel: [ 708.272032] cfg80211: Calling CRDA to update world regulatory domain Oct 5 15:58:04 taoseeker NetworkManager[737]: (wlan2): supplicant interface state: completed -> disconnected Oct 5 15:58:04 taoseeker NetworkManager[737]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 15:58:05 taoseeker wpa_supplicant[985]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 15:58:05 taoseeker kernel: [ 709.526954] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 15:58:05 taoseeker wpa_supplicant[985]: wlan2: Trying to associate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 15:58:05 taoseeker kernel: [ 709.538221] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 15:58:05 taoseeker kernel: [ 709.539894] wlan2: authenticated Oct 5 15:58:05 taoseeker NetworkManager[737]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 15:58:05 taoseeker kernel: [ 709.543398] wlan2: associating with AP with corrupt beacon Oct 5 15:58:05 taoseeker kernel: [ 709.545895] wlan2: associate with 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 15:58:05 taoseeker kernel: [ 709.548467] wlan2: RX AssocResp from 50:67:f0:d3:ed:c4 (capab=0xc11 status=0 aid=1) Oct 5 15:58:05 taoseeker kernel: [ 709.549095] wlan2: associated Oct 5 15:58:05 taoseeker kernel: [ 709.549744] cfg80211: Pending regulatory request, waiting for it to be processed... Oct 5 15:58:05 taoseeker wpa_supplicant[985]: wlan2: Associated with 50:67:f0:d3:ed:c4 Oct 5 15:58:05 taoseeker NetworkManager[737]: (wlan2): supplicant interface state: authenticating -> associating Oct 5 15:58:05 taoseeker NetworkManager[737]: (wlan2): supplicant interface state: associating -> associated Oct 5 15:58:06 taoseeker NetworkManager[737]: (wlan2): supplicant interface state: associated -> 4-way handshake Oct 5 15:58:06 taoseeker wpa_supplicant[985]: wlan2: WPA: Key negotiation completed with 50:67:f0:d3:ed:c4 [PTK=CCMP GTK=CCMP] Oct 5 15:58:06 taoseeker wpa_supplicant[985]: wlan2: CTRL-EVENT-CONNECTED - Connection to 50:67:f0:d3:ed:c4 completed (reauth) [id=0 id_str=] Oct 5 15:58:06 taoseeker NetworkManager[737]: (wlan2): supplicant interface state: 4-way handshake -> completed Oct 5 15:59:13 taoseeker wpa_supplicant[985]: wlan2: CTRL-EVENT-DISCONNECTED bssid=50:67:f0:d3:ed:c4 reason=3 Oct 5 15:59:13 taoseeker kernel: [ 777.032281] wlan2: deauthenticated from 50:67:f0:d3:ed:c4 (Reason: 3) Oct 5 15:59:13 taoseeker kernel: [ 777.037203] cfg80211: All devices are disconnected, going to restore regulatory settings Oct 5 15:59:13 taoseeker kernel: [ 777.037219] cfg80211: Restoring regulatory settings Oct 5 15:59:13 taoseeker kernel: [ 777.037230] cfg80211: Calling CRDA to update world regulatory domain Oct 5 15:59:13 taoseeker NetworkManager[737]: (wlan2): supplicant interface state: completed -> disconnected Oct 5 15:59:13 taoseeker NetworkManager[737]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 15:59:14 taoseeker wpa_supplicant[985]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 15:59:14 taoseeker kernel: [ 778.288027] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 15:59:14 taoseeker NetworkManager[737]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 15:59:14 taoseeker kernel: [ 778.299260] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 15:59:14 taoseeker kernel: [ 778.301084] wlan2: authenticated Oct 5 15:59:14 taoseeker wpa_supplicant[985]: wlan2: Trying to associate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 15:59:14 taoseeker kernel: [ 778.305906] wlan2: associating with AP with corrupt beacon Oct 5 15:59:14 taoseeker kernel: [ 778.306931] wlan2: associate with 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 15:59:14 taoseeker kernel: [ 778.309515] wlan2: RX AssocResp from 50:67:f0:d3:ed:c4 (capab=0xc11 status=0 aid=1) Oct 5 15:59:14 taoseeker kernel: [ 778.310007] wlan2: associated Oct 5 15:59:14 taoseeker kernel: [ 778.310725] cfg80211: Pending regulatory request, waiting for it to be processed... Oct 5 15:59:14 taoseeker wpa_supplicant[985]: wlan2: Associated with 50:67:f0:d3:ed:c4 Oct 5 15:59:14 taoseeker NetworkManager[737]: (wlan2): supplicant interface state: authenticating -> associating Oct 5 15:59:14 taoseeker NetworkManager[737]: (wlan2): supplicant interface state: associating -> associated Oct 5 15:59:15 taoseeker NetworkManager[737]: (wlan2): supplicant interface state: associated -> 4-way handshake Oct 5 15:59:15 taoseeker wpa_supplicant[985]: wlan2: WPA: Key negotiation completed with 50:67:f0:d3:ed:c4 [PTK=CCMP GTK=CCMP] Oct 5 15:59:15 taoseeker wpa_supplicant[985]: wlan2: CTRL-EVENT-CONNECTED - Connection to 50:67:f0:d3:ed:c4 completed (reauth) [id=0 id_str=] Oct 5 15:59:15 taoseeker NetworkManager[737]: (wlan2): supplicant interface state: 4-way handshake -> completed Oct 5 16:16:56 taoseeker NetworkManager[737]: nl_recvmsgs() error: (-33) Dump inconsistency detected, interrupted Oct 5 16:24:53 taoseeker wpa_supplicant[985]: wlan2: WPA: Group rekeying completed with 50:67:f0:d3:ed:c4 [GTK=CCMP] Oct 5 16:54:54 taoseeker wpa_supplicant[985]: wlan2: WPA: Group rekeying completed with 50:67:f0:d3:ed:c4 [GTK=CCMP] Oct 5 17:15:49 taoseeker wpa_supplicant[985]: wlan2: CTRL-EVENT-DISCONNECTED bssid=50:67:f0:d3:ed:c4 reason=4 Oct 5 17:15:49 taoseeker kernel: [ 5373.334799] ieee80211 phy0: >wlan2: No probe response from AP 50:67:f0:d3:ed:c4 after 500ms, disconnecting. Oct 5 17:15:49 taoseeker kernel: [ 5373.337275] cfg80211: All devices are disconnected, going to restore regulatory settings Oct 5 17:15:49 taoseeker kernel: [ 5373.337291] cfg80211: Restoring regulatory settings Oct 5 17:15:49 taoseeker kernel: [ 5373.337305] cfg80211: Calling CRDA for country: NO Oct 5 17:15:49 taoseeker NetworkManager[737]: (wlan2): supplicant interface state: completed -> disconnected Oct 5 17:15:49 taoseeker NetworkManager[737]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:15:50 taoseeker wpa_supplicant[985]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:15:50 taoseeker kernel: [ 5374.592006] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:15:50 taoseeker wpa_supplicant[985]: wlan2: Trying to associate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:15:50 taoseeker kernel: [ 5374.603141] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:15:50 taoseeker kernel: [ 5374.604707] wlan2: authenticated Oct 5 17:15:50 taoseeker NetworkManager[737]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:15:50 taoseeker kernel: [ 5374.608479] wlan2: associating with AP with corrupt beacon Oct 5 17:15:50 taoseeker kernel: [ 5374.611140] wlan2: associate with 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:15:50 taoseeker kernel: [ 5374.615762] wlan2: RX AssocResp from 50:67:f0:d3:ed:c4 (capab=0xc11 status=0 aid=1) Oct 5 17:15:50 taoseeker kernel: [ 5374.616455] wlan2: associated Oct 5 17:15:50 taoseeker wpa_supplicant[985]: wlan2: Associated with 50:67:f0:d3:ed:c4 Oct 5 17:15:50 taoseeker NetworkManager[737]: (wlan2): supplicant interface state: authenticating -> associating Oct 5 17:15:50 taoseeker NetworkManager[737]: (wlan2): supplicant interface state: associating -> associated Oct 5 17:15:51 taoseeker NetworkManager[737]: (wlan2): supplicant interface state: associated -> 4-way handshake Oct 5 17:15:51 taoseeker wpa_supplicant[985]: wlan2: WPA: Key negotiation completed with 50:67:f0:d3:ed:c4 [PTK=CCMP GTK=CCMP] Oct 5 17:15:51 taoseeker wpa_supplicant[985]: wlan2: CTRL-EVENT-CONNECTED - Connection to 50:67:f0:d3:ed:c4 completed (reauth) [id=0 id_str=] Oct 5 17:15:51 taoseeker NetworkManager[737]: (wlan2): supplicant interface state: 4-way handshake -> completed Oct 5 17:16:02 taoseeker wpa_supplicant[985]: wlan2: CTRL-EVENT-DISCONNECTED bssid=50:67:f0:d3:ed:c4 reason=4 Oct 5 17:16:02 taoseeker kernel: [ 5386.338834] ieee80211 phy0: >wlan2: No probe response from AP 50:67:f0:d3:ed:c4 after 500ms, disconnecting. Oct 5 17:16:02 taoseeker kernel: [ 5386.340849] cfg80211: All devices are disconnected, going to restore regulatory settings Oct 5 17:16:02 taoseeker kernel: [ 5386.340867] cfg80211: Restoring regulatory settings Oct 5 17:16:02 taoseeker kernel: [ 5386.340879] cfg80211: Calling CRDA to update world regulatory domain Oct 5 17:16:02 taoseeker NetworkManager[737]: (wlan2): supplicant interface state: completed -> disconnected Oct 5 17:16:02 taoseeker NetworkManager[737]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:16:03 taoseeker wpa_supplicant[985]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:16:03 taoseeker kernel: [ 5387.597586] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:16:03 taoseeker NetworkManager[737]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:16:03 taoseeker kernel: [ 5387.607156] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:16:03 taoseeker kernel: [ 5387.608734] wlan2: authenticated Oct 5 17:16:03 taoseeker wpa_supplicant[985]: wlan2: Trying to associate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:16:03 taoseeker kernel: [ 5387.612827] wlan2: associating with AP with corrupt beacon Oct 5 17:16:03 taoseeker kernel: [ 5387.614856] wlan2: associate with 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:16:03 taoseeker kernel: [ 5387.617306] wlan2: RX AssocResp from 50:67:f0:d3:ed:c4 (capab=0xc11 status=0 aid=1) Oct 5 17:16:03 taoseeker kernel: [ 5387.617791] wlan2: associated Oct 5 17:16:03 taoseeker kernel: [ 5387.618442] cfg80211: Pending regulatory request, waiting for it to be processed... Oct 5 17:16:03 taoseeker NetworkManager[737]: (wlan2): supplicant interface state: authenticating -> associating Oct 5 17:16:03 taoseeker wpa_supplicant[985]: wlan2: Associated with 50:67:f0:d3:ed:c4 Oct 5 17:16:03 taoseeker NetworkManager[737]: (wlan2): supplicant interface state: associating -> associated Oct 5 17:16:04 taoseeker NetworkManager[737]: (wlan2): supplicant interface state: associated -> 4-way handshake Oct 5 17:16:04 taoseeker wpa_supplicant[985]: wlan2: WPA: Key negotiation completed with 50:67:f0:d3:ed:c4 [PTK=CCMP GTK=CCMP] Oct 5 17:16:04 taoseeker wpa_supplicant[985]: wlan2: CTRL-EVENT-CONNECTED - Connection to 50:67:f0:d3:ed:c4 completed (reauth) [id=0 id_str=] Oct 5 17:16:04 taoseeker NetworkManager[737]: (wlan2): supplicant interface state: 4-way handshake -> completed Oct 5 17:16:15 taoseeker wpa_supplicant[985]: wlan2: CTRL-EVENT-DISCONNECTED bssid=50:67:f0:d3:ed:c4 reason=4 Oct 5 17:16:15 taoseeker kernel: [ 5399.334894] ieee80211 phy0: >wlan2: No probe response from AP 50:67:f0:d3:ed:c4 after 500ms, disconnecting. Oct 5 17:16:15 taoseeker kernel: [ 5399.337083] cfg80211: All devices are disconnected, going to restore regulatory settings Oct 5 17:16:15 taoseeker kernel: [ 5399.337101] cfg80211: Restoring regulatory settings Oct 5 17:16:15 taoseeker kernel: [ 5399.337115] cfg80211: Calling CRDA for country: NO Oct 5 17:16:15 taoseeker NetworkManager[737]: (wlan2): supplicant interface state: completed -> disconnected Oct 5 17:16:15 taoseeker NetworkManager[737]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:16:16 taoseeker wpa_supplicant[985]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:16:16 taoseeker kernel: [ 5400.591929] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:16:16 taoseeker wpa_supplicant[985]: wlan2: Trying to associate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:16:16 taoseeker kernel: [ 5400.603187] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:16:16 taoseeker kernel: [ 5400.604887] wlan2: authenticated Oct 5 17:16:16 taoseeker NetworkManager[737]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:16:16 taoseeker kernel: [ 5400.608949] wlan2: associating with AP with corrupt beacon Oct 5 17:16:16 taoseeker kernel: [ 5400.610898] wlan2: associate with 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:16:16 taoseeker kernel: [ 5400.613439] wlan2: RX AssocResp from 50:67:f0:d3:ed:c4 (capab=0xc11 status=0 aid=1) Oct 5 17:16:16 taoseeker kernel: [ 5400.613934] wlan2: associated Oct 5 17:16:16 taoseeker wpa_supplicant[985]: wlan2: Associated with 50:67:f0:d3:ed:c4 Oct 5 17:16:16 taoseeker NetworkManager[737]: (wlan2): supplicant interface state: authenticating -> associating Oct 5 17:16:16 taoseeker NetworkManager[737]: (wlan2): supplicant interface state: associating -> associated Oct 5 17:16:17 taoseeker NetworkManager[737]: (wlan2): supplicant interface state: associated -> 4-way handshake Oct 5 17:16:17 taoseeker wpa_supplicant[985]: wlan2: WPA: Key negotiation completed with 50:67:f0:d3:ed:c4 [PTK=CCMP GTK=CCMP] Oct 5 17:16:17 taoseeker wpa_supplicant[985]: wlan2: CTRL-EVENT-CONNECTED - Connection to 50:67:f0:d3:ed:c4 completed (reauth) [id=0 id_str=] Oct 5 17:16:17 taoseeker NetworkManager[737]: (wlan2): supplicant interface state: 4-way handshake -> completed Oct 5 17:18:01 taoseeker kernel: Kernel logging (proc) stopped. Oct 5 17:18:54 taoseeker kernel: imklog 5.8.6, log source = /proc/kmsg started. Oct 5 17:18:54 taoseeker kernel: [ 0.000000] Using PowerMac machine description Oct 5 17:18:54 taoseeker kernel: [ 0.000000] Total memory = 1536MB; using 4096kB for hash table (at cfc00000) Oct 5 17:18:54 taoseeker kernel: [ 0.000000] Initializing cgroup subsys cpuset Oct 5 17:18:54 taoseeker kernel: [ 0.000000] Initializing cgroup subsys cpu Oct 5 17:18:54 taoseeker kernel: [ 0.000000] Linux version 3.5.0-17-powerpc-smp (buildd@adare) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #26-Ubuntu SMP Wed Oct 3 21:29:20 UTC 2012 (Ubuntu 3.5.0-17.26-powerpc-smp 3.5.5) Oct 5 17:18:54 taoseeker kernel: [ 0.000000] Found initrd at 0xc1800000:0xc2720000 Oct 5 17:18:54 taoseeker kernel: [ 0.000000] Found UniNorth memory controller & host bridge @ 0xf8000000 revision: 0xd2 Oct 5 17:18:54 taoseeker kernel: [ 0.000000] Mapped at 0xff7c0000 Oct 5 17:18:54 taoseeker kernel: [ 0.000000] Found a Intrepid mac-io controller, rev: 0, mapped at 0xff740000 Oct 5 17:18:54 taoseeker kernel: [ 0.000000] Processor NAP mode on idle enabled. Oct 5 17:18:54 taoseeker kernel: [ 0.000000] PowerMac motherboard: iBook G4 Oct 5 17:18:54 taoseeker kernel: [ 0.000000] via-pmu: Server Mode is disabled Oct 5 17:18:54 taoseeker kernel: [ 0.000000] PMU driver v2 initialized for Core99, firmware: 0c Oct 5 17:18:54 taoseeker kernel: [ 0.000000] CPU maps initialized for 1 thread per core Oct 5 17:18:54 taoseeker kernel: [ 0.000000] (thread shift is 0) Oct 5 17:18:54 taoseeker kernel: [ 0.000000] bootconsole [udbg0] enabled Oct 5 17:18:54 taoseeker kernel: [ 0.000000] Found UniNorth PCI host bridge at 0x00000000f0000000. Firmware bus number: 0->0 Oct 5 17:18:54 taoseeker kernel: [ 0.000000] PCI host bridge /pci@f0000000 ranges: Oct 5 17:18:54 taoseeker kernel: [ 0.000000] MEM 0x00000000f1000000..0x00000000f1ffffff -> 0x00000000f1000000 Oct 5 17:18:54 taoseeker kernel: [ 0.000000] IO 0x00000000f0000000..0x00000000f07fffff -> 0x0000000000000000 Oct 5 17:18:54 taoseeker kernel: [ 0.000000] MEM 0x0000000090000000..0x000000009fffffff -> 0x0000000090000000 Oct 5 17:18:54 taoseeker kernel: [ 0.000000] Found UniNorth PCI host bridge at 0x00000000f2000000. Firmware bus number: 0->0 Oct 5 17:18:54 taoseeker kernel: [ 0.000000] PCI host bridge /pci@f2000000 (primary) ranges: Oct 5 17:18:54 taoseeker kernel: [ 0.000000] MEM 0x00000000f3000000..0x00000000f3ffffff -> 0x00000000f3000000 Oct 5 17:18:54 taoseeker kernel: [ 0.000000] IO 0x00000000f2000000..0x00000000f27fffff -> 0x0000000000000000 Oct 5 17:18:54 taoseeker kernel: [ 0.000000] MEM 0x0000000080000000..0x000000008fffffff -> 0x0000000080000000 Oct 5 17:18:54 taoseeker kernel: [ 0.000000] Found UniNorth PCI host bridge at 0x00000000f4000000. Firmware bus number: 0->0 Oct 5 17:18:54 taoseeker kernel: [ 0.000000] PCI host bridge /pci@f4000000 ranges: Oct 5 17:18:54 taoseeker kernel: [ 0.000000] MEM 0x00000000f5000000..0x00000000f5ffffff -> 0x00000000f5000000 Oct 5 17:18:54 taoseeker kernel: [ 0.000000] IO 0x00000000f4000000..0x00000000f47fffff -> 0x0000000000000000 Oct 5 17:18:54 taoseeker kernel: [ 0.000000] nvram: Checking bank 0... Oct 5 17:18:54 taoseeker kernel: [ 0.000000] nvram: gen0=968, gen1=969 Oct 5 17:18:54 taoseeker kernel: [ 0.000000] nvram: Active bank is: 1 Oct 5 17:18:54 taoseeker kernel: [ 0.000000] nvram: OF partition at 0x410 Oct 5 17:18:54 taoseeker kernel: [ 0.000000] nvram: XP partition at 0x1020 Oct 5 17:18:54 taoseeker kernel: [ 0.000000] nvram: NR partition at 0x1120 Oct 5 17:18:54 taoseeker kernel: [ 0.000000] Top of RAM: 0x60000000, Total RAM: 0x60000000 Oct 5 17:18:54 taoseeker kernel: [ 0.000000] Memory hole size: 0MB Oct 5 17:18:54 taoseeker kernel: [ 0.000000] Zone ranges: Oct 5 17:18:54 taoseeker kernel: [ 0.000000] DMA [mem 0x00000000-0x2fffffff] Oct 5 17:18:54 taoseeker kernel: [ 0.000000] Normal empty Oct 5 17:18:54 taoseeker kernel: [ 0.000000] HighMem [mem 0x30000000-0x5fffffff] Oct 5 17:18:54 taoseeker kernel: [ 0.000000] Movable zone start for each node Oct 5 17:18:54 taoseeker kernel: [ 0.000000] Early memory node ranges Oct 5 17:18:54 taoseeker kernel: [ 0.000000] node 0: [mem 0x00000000-0x5fffffff] Oct 5 17:18:54 taoseeker kernel: [ 0.000000] On node 0 totalpages: 393216 Oct 5 17:18:54 taoseeker kernel: [ 0.000000] free_area_init_node: node 0, pgdat c091c220, node_mem_map c0abf000 Oct 5 17:18:54 taoseeker kernel: [ 0.000000] DMA zone: 1536 pages used for memmap Oct 5 17:18:54 taoseeker kernel: [ 0.000000] DMA zone: 0 pages reserved Oct 5 17:18:54 taoseeker kernel: [ 0.000000] DMA zone: 195072 pages, LIFO batch:31 Oct 5 17:18:54 taoseeker kernel: [ 0.000000] HighMem zone: 1536 pages used for memmap Oct 5 17:18:54 taoseeker kernel: [ 0.000000] HighMem zone: 195072 pages, LIFO batch:31 Oct 5 17:18:54 taoseeker kernel: [ 0.000000] PERCPU: Embedded 9 pages/cpu @c16c8000 s12832 r8192 d15840 u36864 Oct 5 17:18:54 taoseeker kernel: [ 0.000000] pcpu-alloc: s12832 r8192 d15840 u36864 alloc=9*4096 Oct 5 17:18:54 taoseeker kernel: [ 0.000000] pcpu-alloc: [0] 0 Oct 5 17:18:54 taoseeker kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 390144 Oct 5 17:18:54 taoseeker kernel: [ 0.000000] Kernel command line: root=UUID=2637ecb6-e215-4cbb-991f-e19d18210b06 ro quiet splash video=radeonfb:1024x768-32@60 Oct 5 17:18:54 taoseeker kernel: [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) Oct 5 17:18:54 taoseeker kernel: [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Oct 5 17:18:54 taoseeker kernel: [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Oct 5 17:18:54 taoseeker kernel: [ 0.000000] allocated 3145728 bytes of page_cgroup Oct 5 17:18:54 taoseeker kernel: [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups Oct 5 17:18:54 taoseeker kernel: [ 0.000000] High memory: 786432k Oct 5 17:18:54 taoseeker kernel: [ 0.000000] Memory: 1525688k/1572864k available (9032k kernel code, 47176k reserved, 396k data, 1521k bss, 384k init) Oct 5 17:18:54 taoseeker kernel: [ 0.000000] Kernel virtual memory layout: Oct 5 17:18:54 taoseeker kernel: [ 0.000000] * 0xfff9f000..0xfffff000 : fixmap Oct 5 17:18:54 taoseeker kernel: [ 0.000000] * 0xff800000..0xffc00000 : highmem PTEs Oct 5 17:18:54 taoseeker kernel: [ 0.000000] * 0xfdf32000..0xff800000 : early ioremap Oct 5 17:18:54 taoseeker kernel: [ 0.000000] * 0xf1000000..0xfdf32000 : vmalloc & ioremap Oct 5 17:18:54 taoseeker kernel: [ 0.000000] SLUB: Genslabs=15, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Oct 5 17:18:54 taoseeker kernel: [ 0.000000] Hierarchical RCU implementation. Oct 5 17:18:54 taoseeker kernel: [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. Oct 5 17:18:54 taoseeker kernel: [ 0.000000] NR_IRQS:512 nr_irqs:512 16 Oct 5 17:18:54 taoseeker kernel: [ 0.000000] mpic: Resetting Oct 5 17:18:54 taoseeker kernel: [ 0.000000] mpic: Setting up MPIC " MPIC 1 " version 1.2 at 80040000, max 1 CPUs Oct 5 17:18:54 taoseeker kernel: [ 0.000000] mpic: ISU size: 64, shift: 6, mask: 3f Oct 5 17:18:54 taoseeker kernel: [ 0.000000] mpic: Initializing for 64 sources Oct 5 17:18:54 taoseeker kernel: [ 0.000000] GMT Delta read from XPRAM: 0 minutes, DST: off Oct 5 17:18:54 taoseeker kernel: [ 0.000000] time_init: decrementer frequency = 18.432000 MHz Oct 5 17:18:54 taoseeker kernel: [ 0.000000] time_init: processor frequency = 1420.000000 MHz Oct 5 17:18:54 taoseeker kernel: [ 0.000000] clocksource: timebase mult[3640e38e] shift[24] registered Oct 5 17:18:54 taoseeker kernel: [ 0.000000] clockevent: decrementer mult[4b7f5a5] shift[32] cpu[0] Oct 5 17:18:54 taoseeker kernel: [ 0.000000] Console: colour dummy device 80x25 Oct 5 17:18:54 taoseeker kernel: [ 0.000000] console [tty0] enabled, bootconsole disabled Oct 5 17:18:54 taoseeker kernel: [ 0.000436] pid_max: default: 32768 minimum: 301 Oct 5 17:18:54 taoseeker kernel: [ 0.000550] Security Framework initialized Oct 5 17:18:54 taoseeker kernel: [ 0.000648] AppArmor: AppArmor initialized Oct 5 17:18:54 taoseeker kernel: [ 0.000654] Yama: becoming mindful. Oct 5 17:18:54 taoseeker kernel: [ 0.000748] Mount-cache hash table entries: 512 Oct 5 17:18:54 taoseeker kernel: [ 0.001384] device-tree: Duplicate name in /cpus/PowerPC,G4@0, renamed to "l2-cache#1" Oct 5 17:18:54 taoseeker kernel: [ 0.007015] Initializing cgroup subsys cpuacct Oct 5 17:18:54 taoseeker kernel: [ 0.007030] Initializing cgroup subsys memory Oct 5 17:18:54 taoseeker kernel: [ 0.007061] Initializing cgroup subsys devices Oct 5 17:18:54 taoseeker kernel: [ 0.007069] Initializing cgroup subsys freezer Oct 5 17:18:54 taoseeker kernel: [ 0.007076] Initializing cgroup subsys blkio Oct 5 17:18:54 taoseeker kernel: [ 0.007083] Initializing cgroup subsys perf_event Oct 5 17:18:54 taoseeker kernel: [ 0.007190] ftrace: allocating 21198 entries in 63 pages Oct 5 17:18:54 taoseeker kernel: [ 0.040008] PowerMac SMP probe found 1 cpus Oct 5 17:18:54 taoseeker kernel: [ 0.040028] MPC7450 family performance monitor hardware support registered Oct 5 17:18:54 taoseeker kernel: [ 0.040756] Brought up 1 CPUs Oct 5 17:18:54 taoseeker kernel: [ 0.041394] devtmpfs: initialized Oct 5 17:18:54 taoseeker kernel: [ 0.041769] EVM: security.selinux Oct 5 17:18:54 taoseeker kernel: [ 0.041776] EVM: security.SMACK64 Oct 5 17:18:54 taoseeker kernel: [ 0.041780] EVM: security.capability Oct 5 17:18:54 taoseeker kernel: [ 0.044614] dummy: Oct 5 17:18:54 taoseeker kernel: [ 0.044842] NET: Registered protocol family 16 Oct 5 17:18:54 taoseeker kernel: [ 0.045844] KeyWest i2c @0xf8001003 irq 42 /uni-n@f8000000/i2c@f8001000 Oct 5 17:18:54 taoseeker kernel: [ 0.045856] channel 1 bus /uni-n@f8000000/i2c@f8001000/i2c-bus@1 Oct 5 17:18:54 taoseeker kernel: [ 0.045967] KeyWest i2c @0x80018000 irq 26 /pci@f2000000/mac-io@17/i2c@18000 Oct 5 17:18:54 taoseeker kernel: [ 0.045976] channel 0 bus /pci@f2000000/mac-io@17/i2c@18000/i2c-bus@0 Oct 5 17:18:54 taoseeker kernel: [ 0.045995] PMU i2c /pci@f2000000/mac-io@17/via-pmu@16000/pmu-i2c Oct 5 17:18:54 taoseeker kernel: [ 0.046002] channel 1 bus Oct 5 17:18:54 taoseeker kernel: [ 0.046016] channel 2 bus Oct 5 17:18:54 taoseeker kernel: [ 0.046602] PCI: Probing PCI hardware Oct 5 17:18:54 taoseeker kernel: [ 0.046700] PCI host bridge to bus 0000:00 Oct 5 17:18:54 taoseeker kernel: [ 0.046719] pci_bus 0000:00: >root bus resource [io 0x802000-0x1001fff] (bus address [0x0000-0x7fffff]) Oct 5 17:18:54 taoseeker kernel: [ 0.046730] pci_bus 0000:00: >root bus resource [mem 0xf1000000-0xf1ffffff] Oct 5 17:18:54 taoseeker kernel: [ 0.046740] pci_bus 0000:00: >root bus resource [mem 0x90000000-0x9fffffff] Oct 5 17:18:54 taoseeker kernel: [ 0.046794] pci 0000:00:0b.0: >[106b:0034] type 00 class 0x060000 Oct 5 17:18:54 taoseeker kernel: [ 0.046920] pci 0000:00:10.0: >[1002:4e56] type 00 class 0x030000 Oct 5 17:18:54 taoseeker kernel: [ 0.046949] pci 0000:00:10.0: >reg 10: [mem 0x98000000-0x9fffffff pref] Oct 5 17:18:54 taoseeker kernel: [ 0.046966] pci 0000:00:10.0: >reg 14: [io 0x802400-0x8024ff] Oct 5 17:18:54 taoseeker kernel: [ 0.046982] pci 0000:00:10.0: >reg 18: [mem 0x90000000-0x9000ffff] Oct 5 17:18:54 taoseeker kernel: [ 0.047019] pci 0000:00:10.0: >reg 30: [mem 0x90020000-0x9003ffff pref] Oct 5 17:18:54 taoseeker kernel: [ 0.047069] pci 0000:00:10.0: >supports D1 D2 Oct 5 17:18:54 taoseeker kernel: [ 0.047446] PCI host bridge to bus 0001:10 Oct 5 17:18:54 taoseeker kernel: [ 0.047458] pci_bus 0001:10: >root bus resource [io 0x0000-0x7fffff] Oct 5 17:18:54 taoseeker kernel: [ 0.047468] pci_bus 0001:10: >root bus resource [mem 0xf3000000-0xf3ffffff] Oct 5 17:18:54 taoseeker kernel: [ 0.047478] pci_bus 0001:10: >root bus resource [mem 0x80000000-0x8fffffff] Oct 5 17:18:54 taoseeker kernel: [ 0.047525] pci 0001:10:0b.0: >[106b:0035] type 00 class 0x060000 Oct 5 17:18:54 taoseeker kernel: [ 0.047615] pci 0001:10:12.0: >[14e4:4318] type 00 class 0x028000 Oct 5 17:18:54 taoseeker kernel: [ 0.047638] pci 0001:10:12.0: >reg 10: [mem 0x80084000-0x80085fff] Oct 5 17:18:54 taoseeker kernel: [ 0.047733] pci 0001:10:17.0: >[106b:003e] type 00 class 0xff0000 Oct 5 17:18:54 taoseeker kernel: [ 0.047755] pci 0001:10:17.0: >reg 10: [mem 0x80000000-0x8007ffff] Oct 5 17:18:54 taoseeker kernel: [ 0.047915] pci 0001:10:18.0: >[106b:003f] type 00 class 0x0c0310 Oct 5 17:18:54 taoseeker kernel: [ 0.047940] pci 0001:10:18.0: >reg 10: [mem 0x00000000-0x00000fff] Oct 5 17:18:54 taoseeker kernel: [ 0.048043] pci 0001:10:19.0: >[106b:003f] type 00 class 0x0c0310 Oct 5 17:18:54 taoseeker kernel: [ 0.048066] pci 0001:10:19.0: >reg 10: [mem 0x00000000-0x00000fff] Oct 5 17:18:54 taoseeker kernel: [ 0.048156] pci 0001:10:1a.0: >[106b:003f] type 00 class 0x0c0310 Oct 5 17:18:54 taoseeker kernel: [ 0.048178] pci 0001:10:1a.0: >reg 10: [mem 0x80083000-0x80083fff] Oct 5 17:18:54 taoseeker kernel: [ 0.048272] pci 0001:10:1b.0: >[1033:0035] type 00 class 0x0c0310 Oct 5 17:18:54 taoseeker kernel: [ 0.048299] pci 0001:10:1b.0: >reg 10: [mem 0x80082000-0x80082fff] Oct 5 17:18:54 taoseeker kernel: [ 0.048387] pci 0001:10:1b.0: >supports D1 D2 Oct 5 17:18:54 taoseeker kernel: [ 0.048396] pci 0001:10:1b.0: >PME# supported from D0 D1 D2 D3hot D3cold Oct 5 17:18:54 taoseeker kernel: [ 0.048439] pci 0001:10:1b.1: >[1033:0035] type 00 class 0x0c0310 Oct 5 17:18:54 taoseeker kernel: [ 0.048465] pci 0001:10:1b.1: >reg 10: [mem 0x80081000-0x80081fff] Oct 5 17:18:54 taoseeker kernel: [ 0.048553] pci 0001:10:1b.1: >supports D1 D2 Oct 5 17:18:54 taoseeker kernel: [ 0.048562] pci 0001:10:1b.1: >PME# supported from D0 D1 D2 D3hot D3cold Oct 5 17:18:54 taoseeker kernel: [ 0.048604] pci 0001:10:1b.2: >[1033:00e0] type 00 class 0x0c0320 Oct 5 17:18:54 taoseeker kernel: [ 0.048630] pci 0001:10:1b.2: >reg 10: [mem 0x80080000-0x800800ff] Oct 5 17:18:54 taoseeker kernel: [ 0.048718] pci 0001:10:1b.2: >supports D1 D2 Oct 5 17:18:54 taoseeker kernel: [ 0.048727] pci 0001:10:1b.2: >PME# supported from D0 D1 D2 D3hot D3cold Oct 5 17:18:54 taoseeker kernel: [ 0.050009] PCI host bridge to bus 0002:20 Oct 5 17:18:54 taoseeker kernel: [ 0.050025] pci_bus 0002:20: >root bus resource [io 0xff7fe000-0xffffdfff] (bus address [0x0000-0x7fffff]) Oct 5 17:18:54 taoseeker kernel: [ 0.050035] pci_bus 0002:20: >root bus resource [mem 0xf5000000-0xf5ffffff] Oct 5 17:18:54 taoseeker kernel: [ 0.050081] pci 0002:20:0b.0: >[106b:0036] type 00 class 0x060000 Oct 5 17:18:54 taoseeker kernel: [ 0.050155] pci 0002:20:0d.0: >[106b:003b] type 00 class 0xff0000 Oct 5 17:18:54 taoseeker kernel: [ 0.050175] pci 0002:20:0d.0: >reg 10: [mem 0xf5004000-0xf5007fff] Oct 5 17:18:54 taoseeker kernel: [ 0.050255] pci 0002:20:0e.0: >[106b:0031] type 00 class 0x0c0010 Oct 5 17:18:54 taoseeker kernel: [ 0.050278] pci 0002:20:0e.0: >reg 10: [mem 0xf5000000-0xf5000fff] Oct 5 17:18:54 taoseeker kernel: [ 0.050352] pci 0002:20:0e.0: >supports D1 D2 Oct 5 17:18:54 taoseeker kernel: [ 0.050361] pci 0002:20:0e.0: >PME# supported from D0 D1 D2 D3hot Oct 5 17:18:54 taoseeker kernel: [ 0.050406] pci 0002:20:0f.0: >[106b:0032] type 00 class 0x020000 Oct 5 17:18:54 taoseeker kernel: [ 0.050427] pci 0002:20:0f.0: >reg 10: [mem 0xf5200000-0xf53fffff] Oct 5 17:18:54 taoseeker kernel: [ 0.050475] pci 0002:20:0f.0: >reg 30: [mem 0xf5100000-0xf51fffff pref] Oct 5 17:18:54 taoseeker kernel: [ 0.051267] PCI 0000:00 Cannot reserve Legacy IO [io 0x802000-0x802fff] Oct 5 17:18:54 taoseeker kernel: [ 0.051338] pci_bus 0000:00: >resource 4 [io 0x802000-0x1001fff] Oct 5 17:18:54 taoseeker kernel: [ 0.051347] pci_bus 0000:00: >resource 5 [mem 0xf1000000-0xf1ffffff] Oct 5 17:18:54 taoseeker kernel: [ 0.051357] pci_bus 0000:00: >resource 6 [mem 0x90000000-0x9fffffff] Oct 5 17:18:54 taoseeker kernel: [ 0.051367] pci_bus 0001:10: >resource 4 [io 0x0000-0x7fffff] Oct 5 17:18:54 taoseeker kernel: [ 0.051377] pci_bus 0001:10: >resource 5 [mem 0xf3000000-0xf3ffffff] Oct 5 17:18:54 taoseeker kernel: [ 0.051386] pci_bus 0001:10: >resource 6 [mem 0x80000000-0x8fffffff] Oct 5 17:18:54 taoseeker kernel: [ 0.051397] pci_bus 0002:20: >resource 4 [io 0xff7fe000-0xffffdfff] Oct 5 17:18:54 taoseeker kernel: [ 0.051406] pci_bus 0002:20: >resource 5 [mem 0xf5000000-0xf5ffffff] Oct 5 17:18:54 taoseeker kernel: [ 0.055501] bio: create slab at 0 Oct 5 17:18:54 taoseeker kernel: [ 0.056402] vgaarb: device added: PCI:0000:00:10.0,decodes=io+mem,owns=mem,locks=none Oct 5 17:18:54 taoseeker kernel: [ 0.056450] vgaarb: loaded Oct 5 17:18:54 taoseeker kernel: [ 0.056455] vgaarb: bridge control possible 0000:00:10.0 Oct 5 17:18:54 taoseeker kernel: [ 0.057412] SCSI subsystem initialized Oct 5 17:18:54 taoseeker kernel: [ 0.057570] libata version 3.00 loaded. Oct 5 17:18:54 taoseeker kernel: [ 0.057748] usbcore: registered new interface driver usbfs Oct 5 17:18:54 taoseeker kernel: [ 0.057791] usbcore: registered new interface driver hub Oct 5 17:18:54 taoseeker kernel: [ 0.057883] usbcore: registered new device driver usb Oct 5 17:18:54 taoseeker kernel: [ 0.058614] NetLabel: Initializing Oct 5 17:18:54 taoseeker kernel: [ 0.058622] NetLabel: domain hash size = 128 Oct 5 17:18:54 taoseeker kernel: [ 0.058627] NetLabel: protocols = UNLABELED CIPSOv4 Oct 5 17:18:54 taoseeker kernel: [ 0.058673] NetLabel: unlabeled traffic allowed by default Oct 5 17:18:54 taoseeker kernel: [ 0.058894] Switching to clocksource timebase Oct 5 17:18:54 taoseeker kernel: [ 0.074644] AppArmor: AppArmor Filesystem Enabled Oct 5 17:18:54 taoseeker kernel: [ 0.081440] NET: Registered protocol family 2 Oct 5 17:18:54 taoseeker kernel: [ 0.081627] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) Oct 5 17:18:54 taoseeker kernel: [ 0.082302] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) Oct 5 17:18:54 taoseeker kernel: [ 0.084816] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) Oct 5 17:18:54 taoseeker kernel: [ 0.086024] TCP: Hash tables configured (established 131072 bind 65536) Oct 5 17:18:54 taoseeker kernel: [ 0.086032] TCP: reno registered Oct 5 17:18:54 taoseeker kernel: [ 0.086045] UDP hash table entries: 512 (order: 2, 16384 bytes) Oct 5 17:18:54 taoseeker kernel: [ 0.086113] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) Oct 5 17:18:54 taoseeker kernel: [ 0.086455] NET: Registered protocol family 1 Oct 5 17:18:54 taoseeker kernel: [ 0.086551] Apple USB OHCI 0001:10:18.0 disabled by firmware Oct 5 17:18:54 taoseeker kernel: [ 0.086566] pci 0001:10:18.0: >Can't enable PCI device, BIOS handoff failed. Oct 5 17:18:54 taoseeker kernel: [ 0.086581] Apple USB OHCI 0001:10:19.0 disabled by firmware Oct 5 17:18:54 taoseeker kernel: [ 0.086589] pci 0001:10:19.0: >Can't enable PCI device, BIOS handoff failed. Oct 5 17:18:54 taoseeker kernel: [ 0.086615] pci 0001:10:1a.0: >enabling device (0000 -> 0002) Oct 5 17:18:54 taoseeker kernel: [ 0.139048] pci 0001:10:1b.0: >enabling device (0000 -> 0002) Oct 5 17:18:54 taoseeker kernel: [ 0.194973] pci 0001:10:1b.1: >enabling device (0000 -> 0002) Oct 5 17:18:54 taoseeker kernel: [ 0.250967] pci 0001:10:1b.2: >enabling device (0004 -> 0006) Oct 5 17:18:54 taoseeker kernel: [ 0.251020] PCI: CLS mismatch (32 != 1020), using 32 bytes Oct 5 17:18:54 taoseeker kernel: [ 0.251572] Thermal assist unit not available Oct 5 17:18:54 taoseeker kernel: [ 0.251712] Registering PowerMac CPU frequency driver Oct 5 17:18:54 taoseeker kernel: [ 0.251719] Low: 710 Mhz, High: 1420 Mhz, Boot: 710 Mhz Oct 5 17:18:54 taoseeker kernel: [ 0.252059] Trying to unpack rootfs image as initramfs... Oct 5 17:18:54 taoseeker kernel: [ 0.260323] audit: initializing netlink socket (disabled) Oct 5 17:18:54 taoseeker kernel: [ 0.260365] type=2000 audit(1349450319.244:1): initialized Oct 5 17:18:54 taoseeker kernel: [ 0.379170] highmem bounce pool size: 64 pages Oct 5 17:18:54 taoseeker kernel: [ 0.383301] VFS: Disk quotas dquot_6.5.2 Oct 5 17:18:54 taoseeker kernel: [ 0.383423] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Oct 5 17:18:54 taoseeker kernel: [ 0.384603] fuse init (API version 7.19) Oct 5 17:18:54 taoseeker kernel: [ 0.384801] msgmni has been set to 1445 Oct 5 17:18:54 taoseeker kernel: [ 0.399333] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) Oct 5 17:18:54 taoseeker kernel: [ 0.399491] io scheduler noop registered Oct 5 17:18:54 taoseeker kernel: [ 0.399496] io scheduler deadline registered (default) Oct 5 17:18:54 taoseeker kernel: [ 0.399535] io scheduler cfq registered Oct 5 17:18:54 taoseeker kernel: [ 0.399768] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Oct 5 17:18:54 taoseeker kernel: [ 0.399793] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 Oct 5 17:18:54 taoseeker kernel: [ 0.399969] radeonfb 0000:00:10.0: >enabling device (0006 -> 0007) Oct 5 17:18:54 taoseeker kernel: [ 0.671348] radeonfb 0000:00:10.0: >Invalid ROM contents Oct 5 17:18:54 taoseeker kernel: [ 0.671367] radeonfb (0000:00:10.0): Invalid ROM signature 0 should be 0xaa55 Oct 5 17:18:54 taoseeker kernel: [ 0.671378] radeonfb: Retrieved PLL infos from Open Firmware Oct 5 17:18:54 taoseeker kernel: [ 0.671384] radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=183.00 Mhz, System=210.00 MHz Oct 5 17:18:54 taoseeker kernel: [ 0.671388] radeonfb: PLL min 12000 max 35000 Oct 5 17:18:54 taoseeker kernel: [ 0.768087] i2c i2c-2: >unable to read EDID block. Oct 5 17:18:54 taoseeker kernel: [ 0.920290] i2c i2c-2: >unable to read EDID block. Oct 5 17:18:54 taoseeker kernel: [ 1.036426] Freeing initrd memory: 15488k freed Oct 5 17:18:54 taoseeker kernel: [ 1.071989] i2c i2c-2: >unable to read EDID block. Oct 5 17:18:54 taoseeker kernel: [ 1.427916] radeonfb: Monitor 1 type LCD found Oct 5 17:18:54 taoseeker kernel: [ 1.427919] radeonfb: EDID probed Oct 5 17:18:54 taoseeker kernel: [ 1.427922] radeonfb: Monitor 2 type no found Oct 5 17:18:54 taoseeker kernel: [ 1.427934] radeonfb: Using Firmware dividers 0x00020074 from PPLL 0 Oct 5 17:18:54 taoseeker kernel: [ 1.428024] radeonfb: Dynamic Clock Power Management enabled Oct 5 17:18:54 taoseeker kernel: [ 1.499004] Console: switching to colour frame buffer device 128x48 Oct 5 17:18:54 taoseeker kernel: [ 1.559075] radeonfb: Backlight initialized (radeonbl0) Oct 5 17:18:54 taoseeker kernel: [ 1.559080] radeonfb (0000:00:10.0): ATI Radeon 4e56 "NV" Oct 5 17:18:54 taoseeker kernel: [ 1.560008] pmac_zilog: 0.6 (Benjamin Herrenschmidt ) Oct 5 17:18:54 taoseeker kernel: [ 1.560126] Generic non-volatile memory driver v1.1 Oct 5 17:18:54 taoseeker kernel: [ 1.560178] Linux agpgart interface v0.103 Oct 5 17:18:54 taoseeker kernel: [ 1.563214] brd: module loaded Oct 5 17:18:54 taoseeker kernel: [ 1.564954] loop: module loaded Oct 5 17:18:54 taoseeker kernel: [ 1.565138] MacIO PCI driver attached to Intrepid chipset Oct 5 17:18:54 taoseeker kernel: [ 1.565980] 0.00013020:ch-a: ttyPZ0 at MMIO 0x80013020 (irq = 22) is a Z85c30 ESCC - Serial port Oct 5 17:18:54 taoseeker kernel: [ 1.566238] 0.00013000:ch-b: ttyPZ1 at MMIO 0x80013000 (irq = 23) is a Z85c30 ESCC - Serial port Oct 5 17:18:54 taoseeker kernel: [ 1.567102] pata-pci-macio 0002:20:0d.0: >enabling device (0000 -> 0002) Oct 5 17:18:54 taoseeker kernel: [ 1.567282] adb: starting probe task... Oct 5 17:18:54 taoseeker kernel: [ 1.583068] pata-pci-macio 0002:20:0d.0: >Activating pata-macio chipset UniNorth ATA-6, Apple bus ID 3 Oct 5 17:18:54 taoseeker kernel: [ 1.583441] scsi0 : pata_macio Oct 5 17:18:54 taoseeker kernel: [ 1.583568] ata1: PATA max UDMA/100 irq 39 Oct 5 17:18:54 taoseeker kernel: [ 1.593198] adb devices: [2]: 2 c4 [7]: 7 1f Oct 5 17:18:54 taoseeker kernel: [ 1.598591] ADB keyboard at 2, handler 1 Oct 5 17:18:54 taoseeker kernel: [ 1.598604] Detected ADB keyboard, type ISO, swapping keys. Oct 5 17:18:54 taoseeker kernel: [ 1.598703] input: ADB keyboard as /devices/virtual/input/input0 Oct 5 17:18:54 taoseeker kernel: [ 1.598801] input: ADB Powerbook buttons as /devices/virtual/input/input1 Oct 5 17:18:54 taoseeker kernel: [ 1.598807] adb: finished probe task... Oct 5 17:18:54 taoseeker kernel: [ 1.747342] ata1.00: ATA-7: FUJITSU MHV2060AT, 008100A0, max UDMA/100 Oct 5 17:18:54 taoseeker kernel: [ 1.747349] ata1.00: 117210240 sectors, multi 16: LBA48 Oct 5 17:18:54 taoseeker kernel: [ 1.763237] ata1.00: configured for UDMA/100 Oct 5 17:18:54 taoseeker kernel: [ 1.763542] scsi 0:0:0:0: >Direct-Access ATA FUJITSU MHV2060A 0081 PQ: 0 ANSI: 5 Oct 5 17:18:54 taoseeker kernel: [ 1.763944] sd 0:0:0:0: >Attached scsi generic sg0 type 0 Oct 5 17:18:54 taoseeker kernel: [ 1.764169] sd 0:0:0:0: >[sda] 117210240 512-byte logical blocks: (60.0 GB/55.8 GiB) Oct 5 17:18:54 taoseeker kernel: [ 1.764296] sd 0:0:0:0: >[sda] Write Protect is off Oct 5 17:18:54 taoseeker kernel: [ 1.764303] sd 0:0:0:0: >[sda] Mode Sense: 00 3a 00 00 Oct 5 17:18:54 taoseeker kernel: [ 1.764353] sd 0:0:0:0: >[sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Oct 5 17:18:54 taoseeker kernel: [ 1.846330] sda: [mac] sda1 sda2 sda3 sda4 sda5 Oct 5 17:18:54 taoseeker kernel: [ 1.847270] sd 0:0:0:0: >[sda] Attached SCSI disk Oct 5 17:18:54 taoseeker kernel: [ 2.602945] pata-macio 0.00020000:ata-3: >Activating pata-macio chipset KeyLargo ATA-3, Apple bus ID 0 Oct 5 17:18:54 taoseeker kernel: [ 2.603315] scsi1 : pata_macio Oct 5 17:18:54 taoseeker kernel: [ 2.603402] ata2: PATA max MWDMA2 irq 24 Oct 5 17:18:54 taoseeker kernel: [ 2.604018] Fixed MDIO Bus: probed Oct 5 17:18:54 taoseeker kernel: [ 2.604128] tun: Universal TUN/TAP device driver, 1.6 Oct 5 17:18:54 taoseeker kernel: [ 2.604131] tun: (C) 1999-2004 Max Krasnyansky Oct 5 17:18:54 taoseeker kernel: [ 2.604253] PPP generic driver version 2.4.2 Oct 5 17:18:54 taoseeker kernel: [ 2.604363] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Oct 5 17:18:54 taoseeker kernel: [ 2.604480] ehci_hcd 0001:10:1b.2: >EHCI Host Controller Oct 5 17:18:54 taoseeker kernel: [ 2.604497] ehci_hcd 0001:10:1b.2: >new USB bus registered, assigned bus number 1 Oct 5 17:18:54 taoseeker kernel: [ 2.627017] ehci_hcd 0001:10:1b.2: >irq 63, io mem 0x80080000 Oct 5 17:18:54 taoseeker kernel: [ 2.638936] ehci_hcd 0001:10:1b.2: >USB 2.0 started, EHCI 1.00 Oct 5 17:18:54 taoseeker kernel: [ 2.639000] usb usb1: >New USB device found, idVendor=1d6b, idProduct=0002 Oct 5 17:18:54 taoseeker kernel: [ 2.639006] usb usb1: >New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 5 17:18:54 taoseeker kernel: [ 2.639011] usb usb1: >Product: EHCI Host Controller Oct 5 17:18:54 taoseeker kernel: [ 2.639015] usb usb1: >Manufacturer: Linux 3.5.0-17-powerpc-smp ehci_hcd Oct 5 17:18:54 taoseeker kernel: [ 2.639020] usb usb1: >SerialNumber: 0001:10:1b.2 Oct 5 17:18:54 taoseeker kernel: [ 2.639294] hub 1-0:1.0: >USB hub found Oct 5 17:18:54 taoseeker kernel: [ 2.639308] hub 1-0:1.0: >5 ports detected Oct 5 17:18:54 taoseeker kernel: [ 2.639544] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver Oct 5 17:18:54 taoseeker kernel: [ 2.639596] Apple USB OHCI 0001:10:18.0 disabled by firmware Oct 5 17:18:54 taoseeker kernel: [ 2.639618] Apple USB OHCI 0001:10:19.0 disabled by firmware Oct 5 17:18:54 taoseeker kernel: [ 2.639653] ohci_hcd 0001:10:1a.0: >OHCI Host Controller Oct 5 17:18:54 taoseeker kernel: [ 2.639666] ohci_hcd 0001:10:1a.0: >new USB bus registered, assigned bus number 2 Oct 5 17:18:54 taoseeker kernel: [ 2.639707] ohci_hcd 0001:10:1a.0: >irq 29, io mem 0x80083000 Oct 5 17:18:54 taoseeker kernel: [ 2.714518] usb usb2: >New USB device found, idVendor=1d6b, idProduct=0001 Oct 5 17:18:54 taoseeker kernel: [ 2.714525] usb usb2: >New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 5 17:18:54 taoseeker kernel: [ 2.714530] usb usb2: >Product: OHCI Host Controller Oct 5 17:18:54 taoseeker kernel: [ 2.714534] usb usb2: >Manufacturer: Linux 3.5.0-17-powerpc-smp ohci_hcd Oct 5 17:18:54 taoseeker kernel: [ 2.714539] usb usb2: >SerialNumber: 0001:10:1a.0 Oct 5 17:18:54 taoseeker kernel: [ 2.714773] hub 2-0:1.0: >USB hub found Oct 5 17:18:54 taoseeker kernel: [ 2.714785] hub 2-0:1.0: >2 ports detected Oct 5 17:18:54 taoseeker kernel: [ 2.714915] ohci_hcd 0001:10:1b.0: >OHCI Host Controller Oct 5 17:18:54 taoseeker kernel: [ 2.714943] ohci_hcd 0001:10:1b.0: >new USB bus registered, assigned bus number 3 Oct 5 17:18:54 taoseeker kernel: [ 2.714979] ohci_hcd 0001:10:1b.0: >irq 63, io mem 0x80082000 Oct 5 17:18:54 taoseeker kernel: [ 2.767321] ata2.00: ATAPI: MATSHITADVD-R UJ-845E, DMP2, max UDMA/66 Oct 5 17:18:54 taoseeker kernel: [ 2.790588] usb usb3: >New USB device found, idVendor=1d6b, idProduct=0001 Oct 5 17:18:54 taoseeker kernel: [ 2.790594] usb usb3: >New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 5 17:18:54 taoseeker kernel: [ 2.790599] usb usb3: >Product: OHCI Host Controller Oct 5 17:18:54 taoseeker kernel: [ 2.790604] usb usb3: >Manufacturer: Linux 3.5.0-17-powerpc-smp ohci_hcd Oct 5 17:18:54 taoseeker kernel: [ 2.790608] usb usb3: >SerialNumber: 0001:10:1b.0 Oct 5 17:18:54 taoseeker kernel: [ 2.790820] hub 3-0:1.0: >USB hub found Oct 5 17:18:54 taoseeker kernel: [ 2.790834] hub 3-0:1.0: >3 ports detected Oct 5 17:18:54 taoseeker kernel: [ 2.790980] ohci_hcd 0001:10:1b.1: >OHCI Host Controller Oct 5 17:18:54 taoseeker kernel: [ 2.790993] ohci_hcd 0001:10:1b.1: >new USB bus registered, assigned bus number 4 Oct 5 17:18:54 taoseeker kernel: [ 2.791021] ohci_hcd 0001:10:1b.1: >irq 63, io mem 0x80081000 Oct 5 17:18:54 taoseeker kernel: [ 2.799294] ata2.00: configured for MWDMA2 Oct 5 17:18:54 taoseeker kernel: [ 2.803711] scsi 1:0:0:0: >CD-ROM MATSHITA DVD-R UJ-845E DMP2 PQ: 0 ANSI: 5 Oct 5 17:18:54 taoseeker kernel: [ 2.805679] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray Oct 5 17:18:54 taoseeker kernel: [ 2.805686] cdrom: Uniform CD-ROM driver Revision: 3.20 Oct 5 17:18:54 taoseeker kernel: [ 2.805913] sr 1:0:0:0: >Attached scsi CD-ROM sr0 Oct 5 17:18:54 taoseeker kernel: [ 2.806033] sr 1:0:0:0: >Attached scsi generic sg1 type 5 Oct 5 17:18:54 taoseeker kernel: [ 2.866523] usb usb4: >New USB device found, idVendor=1d6b, idProduct=0001 Oct 5 17:18:54 taoseeker kernel: [ 2.866529] usb usb4: >New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 5 17:18:54 taoseeker kernel: [ 2.866534] usb usb4: >Product: OHCI Host Controller Oct 5 17:18:54 taoseeker kernel: [ 2.866539] usb usb4: >Manufacturer: Linux 3.5.0-17-powerpc-smp ohci_hcd Oct 5 17:18:54 taoseeker kernel: [ 2.866543] usb usb4: >SerialNumber: 0001:10:1b.1 Oct 5 17:18:54 taoseeker kernel: [ 2.866776] hub 4-0:1.0: >USB hub found Oct 5 17:18:54 taoseeker kernel: [ 2.866789] hub 4-0:1.0: >2 ports detected Oct 5 17:18:54 taoseeker kernel: [ 2.866973] uhci_hcd: USB Universal Host Controller Interface driver Oct 5 17:18:54 taoseeker kernel: [ 2.867176] usbcore: registered new interface driver libusual Oct 5 17:18:54 taoseeker kernel: [ 2.867530] mousedev: PS/2 mouse device common for all mice Oct 5 17:18:54 taoseeker kernel: [ 2.867812] PowerMac i2c bus pmu 2 registered Oct 5 17:18:54 taoseeker kernel: [ 2.867876] PowerMac i2c bus pmu 1 registered Oct 5 17:18:54 taoseeker kernel: [ 2.867935] PowerMac i2c bus mac-io 0 registered Oct 5 17:18:54 taoseeker kernel: [ 2.868076] PowerMac i2c bus uni-n 1 registered Oct 5 17:18:54 taoseeker kernel: [ 2.868132] adt746x: version 1 (supported) Oct 5 17:18:54 taoseeker kernel: [ 2.868137] sensor 0: PWR/MEMORY BOTTOMSIDE Oct 5 17:18:54 taoseeker kernel: [ 2.868141] sensor 1: CPU BOTTOMSIDE Oct 5 17:18:54 taoseeker kernel: [ 2.868144] sensor 2: GPU BOTTOMSIDE Oct 5 17:18:54 taoseeker kernel: [ 2.868573] adt746x: ADT7467 initializing Oct 5 17:18:54 taoseeker kernel: [ 2.870670] adt746x: Lowering max temperatures from 69, 92, 101 to 70, 50, 70 Oct 5 17:18:54 taoseeker kernel: [ 2.872918] device-mapper: uevent: version 1.0.3 Oct 5 17:18:54 taoseeker kernel: [ 2.873089] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com Oct 5 17:18:54 taoseeker kernel: [ 2.873103] cpuidle: using governor ladder Oct 5 17:18:54 taoseeker kernel: [ 2.873106] cpuidle: using governor menu Oct 5 17:18:54 taoseeker kernel: [ 2.873340] ashmem: initialized Oct 5 17:18:54 taoseeker kernel: [ 2.873581] TCP: cubic registered Oct 5 17:18:54 taoseeker kernel: [ 2.873848] NET: Registered protocol family 10 Oct 5 17:18:54 taoseeker kernel: [ 2.874256] NET: Registered protocol family 17 Oct 5 17:18:54 taoseeker kernel: [ 2.874288] Key type dns_resolver registered Oct 5 17:18:54 taoseeker kernel: [ 2.874656] registered taskstats version 1 Oct 5 17:18:54 taoseeker kernel: [ 2.882867] Key type trusted registered Oct 5 17:18:54 taoseeker kernel: [ 2.890197] Key type encrypted registered Oct 5 17:18:54 taoseeker kernel: [ 2.897803] input: PMU as /devices/virtual/input/input2 Oct 5 17:18:54 taoseeker kernel: [ 2.897985] Registered led device: pmu-led::front Oct 5 17:18:54 taoseeker kernel: [ 2.897996] /build/buildd/linux-3.5.0/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) Oct 5 17:18:54 taoseeker kernel: [ 2.898782] Freeing unused kernel memory: 384k freed Oct 5 17:18:54 taoseeker kernel: [ 3.051033] usb 2-1: >new full-speed USB device number 2 using ohci_hcd Oct 5 17:18:54 taoseeker kernel: [ 3.261025] usb 2-1: >New USB device found, idVendor=05ac, idProduct=1000 Oct 5 17:18:54 taoseeker kernel: [ 3.261039] usb 2-1: >New USB device strings: Mfr=0, Product=0, SerialNumber=0 Oct 5 17:18:54 taoseeker kernel: [ 3.326641] b43-pci-bridge 0001:10:12.0: >enabling device (0004 -> 0006) Oct 5 17:18:54 taoseeker kernel: [ 3.367221] ssb: Found chip with id 0x4318, rev 0x02 and package 0x02 Oct 5 17:18:54 taoseeker kernel: [ 3.367241] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x0D, vendor 0x4243) Oct 5 17:18:54 taoseeker kernel: [ 3.367248] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x09, vendor 0x4243) Oct 5 17:18:54 taoseeker kernel: [ 3.367255] ssb: Core 2 found: PCI (cc 0x804, rev 0x0C, vendor 0x4243) Oct 5 17:18:54 taoseeker kernel: [ 3.367262] ssb: Core 3 found: PCMCIA (cc 0x80D, rev 0x07, vendor 0x4243) Oct 5 17:18:54 taoseeker kernel: [ 3.407243] ssb: Sonics Silicon Backplane found on PCI device 0001:10:12.0 Oct 5 17:18:54 taoseeker kernel: [ 3.411057] usb 2-2: >new full-speed USB device number 3 using ohci_hcd Oct 5 17:18:54 taoseeker kernel: [ 3.484965] sungem.c:v1.0 David S. Miller Oct 5 17:18:54 taoseeker kernel: [ 3.485561] gem 0002:20:0f.0: >eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:11:24:d5:aa:bc Oct 5 17:18:54 taoseeker kernel: [ 3.527451] firewire_ohci 0002:20:0e.0: >enabling device (0000 -> 0002) Oct 5 17:18:54 taoseeker kernel: [ 3.583304] firewire_ohci 0002:20:0e.0: >added OHCI v1.10 device as card 0, 8 IR + 8 IT contexts, quirks 0x0 Oct 5 17:18:54 taoseeker kernel: [ 3.592005] usb 2-2: >New USB device found, idVendor=05ac, idProduct=030b Oct 5 17:18:54 taoseeker kernel: [ 3.592017] usb 2-2: >New USB device strings: Mfr=1, Product=2, SerialNumber=0 Oct 5 17:18:54 taoseeker kernel: [ 3.592023] usb 2-2: >Product: Apple Internal Trackpad Oct 5 17:18:54 taoseeker kernel: [ 3.592027] usb 2-2: >Manufacturer: Apple Computer Oct 5 17:18:54 taoseeker kernel: [ 3.708888] EXT4-fs (sda3): INFO: recovery required on readonly filesystem Oct 5 17:18:54 taoseeker kernel: [ 3.708904] EXT4-fs (sda3): write access will be enabled during recovery Oct 5 17:18:54 taoseeker kernel: [ 3.789534] input: HID 05ac:1000 as /devices/pci0001:10/0001:10:1a.0/usb2/2-1/2-1:1.0/input/input3 Oct 5 17:18:54 taoseeker kernel: [ 3.790073] hid-generic 0003:05AC:1000.0001: >input,hidraw0: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0001:10:1a.0-1/input0 Oct 5 17:18:54 taoseeker kernel: [ 3.808849] input: HID 05ac:1000 as /devices/pci0001:10/0001:10:1a.0/usb2/2-1/2-1:1.1/input/input4 Oct 5 17:18:54 taoseeker kernel: [ 3.809549] hid-generic 0003:05AC:1000.0002: >input,hidraw1: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0001:10:1a.0-1/input1 Oct 5 17:18:54 taoseeker kernel: [ 3.809773] usbcore: registered new interface driver usbhid Oct 5 17:18:54 taoseeker kernel: [ 3.809777] usbhid: USB HID core driver Oct 5 17:18:54 taoseeker kernel: [ 4.083274] firewire_core 0002:20:0e.0: created device fw0: GUID 001124fffed5aabc, S400 Oct 5 17:18:54 taoseeker kernel: [ 5.018311] EXT4-fs (sda3): recovery complete Oct 5 17:18:54 taoseeker kernel: [ 5.033076] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) Oct 5 17:18:54 taoseeker kernel: [ 8.222290] Adding 2439064k swap on /dev/sda4. Priority:-1 extents:1 across:2439064k Oct 5 17:18:54 taoseeker kernel: [ 9.305849] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Oct 5 17:18:54 taoseeker kernel: [ 11.274549] snd-powermac no longer handles any machines with a layout-id property in the device-tree, use snd-aoa. Oct 5 17:18:54 taoseeker kernel: [ 11.518132] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro Oct 5 17:18:54 taoseeker kernel: [ 11.584824] apm_emu: PMU APM Emulation initialized. Oct 5 17:18:54 taoseeker kernel: [ 12.064773] agpgart-uninorth 0000:00:0b.0: >Apple UniNorth 2 chipset Oct 5 17:18:54 taoseeker kernel: [ 12.066021] agpgart-uninorth 0000:00:0b.0: >configuring for size idx: 64 Oct 5 17:18:54 taoseeker kernel: [ 12.067598] agpgart-uninorth 0000:00:0b.0: >AGP aperture is 256M @ 0x0 Oct 5 17:18:54 taoseeker kernel: [ 12.726527] cfg80211: Calling CRDA to update world regulatory domain Oct 5 17:18:54 taoseeker kernel: [ 12.991117] rtc-generic rtc-generic: >rtc core: registered rtc-generic as rtc0 Oct 5 17:18:54 taoseeker kernel: [ 13.046708] ams: Found I2C based motion sensor Oct 5 17:18:54 taoseeker kernel: [ 13.972392] usb 2-1: >USB disconnect, device number 2 Oct 5 17:18:54 taoseeker kernel: [ 13.975878] usb 2-1: >usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -62 Oct 5 17:18:54 taoseeker kernel: [ 13.980025] appletouch 2-2:1.0: >Geyser mode initialized. Oct 5 17:18:54 taoseeker kernel: [ 13.980367] input: appletouch as /devices/pci0001:10/0001:10:1a.0/usb2/2-2/2-2:1.0/input/input5 Oct 5 17:18:54 taoseeker kernel: [ 13.981183] usbcore: registered new interface driver appletouch Oct 5 17:18:54 taoseeker kernel: [ 14.120221] b43-phy0: Broadcom 4318 WLAN found (core revision 9) Oct 5 17:18:54 taoseeker kernel: [ 14.195934] Broadcom 43xx driver loaded [ Features: PNL ] Oct 5 17:18:54 taoseeker kernel: [ 14.303011] usb 2-1: >new full-speed USB device number 4 using ohci_hcd Oct 5 17:18:54 taoseeker kernel: [ 14.653005] usb 2-1: >New USB device found, idVendor=05ac, idProduct=8207 Oct 5 17:18:54 taoseeker kernel: [ 14.653018] usb 2-1: >New USB device strings: Mfr=0, Product=0, SerialNumber=0 Oct 5 17:18:54 taoseeker kernel: [ 14.831308] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: Oct 5 17:18:54 taoseeker kernel: [ 14.831320] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) Oct 5 17:18:54 taoseeker kernel: [ 14.831325] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: Oct 5 17:18:54 taoseeker kernel: [ 14.831329] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) Oct 5 17:18:54 taoseeker kernel: [ 14.831332] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: Oct 5 17:18:54 taoseeker kernel: [ 14.831336] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) Oct 5 17:18:54 taoseeker kernel: [ 14.831340] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: Oct 5 17:18:54 taoseeker kernel: [ 14.831501] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) Oct 5 17:18:54 taoseeker kernel: [ 14.831506] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: Oct 5 17:18:54 taoseeker kernel: [ 14.831510] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) Oct 5 17:18:54 taoseeker kernel: [ 14.831514] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: Oct 5 17:18:54 taoseeker kernel: [ 14.831518] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) Oct 5 17:18:54 taoseeker kernel: [ 14.831521] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: Oct 5 17:18:54 taoseeker kernel: [ 14.831525] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) Oct 5 17:18:54 taoseeker kernel: [ 14.831529] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: Oct 5 17:18:54 taoseeker kernel: [ 14.831533] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) Oct 5 17:18:54 taoseeker kernel: [ 14.831537] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: Oct 5 17:18:54 taoseeker kernel: [ 14.831541] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) Oct 5 17:18:54 taoseeker kernel: [ 14.831544] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: Oct 5 17:18:54 taoseeker kernel: [ 14.831548] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) Oct 5 17:18:54 taoseeker kernel: [ 14.831552] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: Oct 5 17:18:54 taoseeker kernel: [ 14.831556] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) Oct 5 17:18:54 taoseeker kernel: [ 14.831560] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: Oct 5 17:18:54 taoseeker kernel: [ 14.831564] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (600 mBi, 2000 mBm) Oct 5 17:18:54 taoseeker kernel: [ 14.831568] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: Oct 5 17:18:54 taoseeker kernel: [ 14.831572] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (600 mBi, 2000 mBm) Oct 5 17:18:54 taoseeker kernel: [ 14.831576] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule: Oct 5 17:18:54 taoseeker kernel: [ 14.831580] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (600 mBi, 2000 mBm) Oct 5 17:18:54 taoseeker kernel: [ 14.923163] Bluetooth: Core ver 2.16 Oct 5 17:18:54 taoseeker kernel: [ 14.923367] NET: Registered protocol family 31 Oct 5 17:18:54 taoseeker kernel: [ 14.923372] Bluetooth: HCI device and connection manager initialized Oct 5 17:18:54 taoseeker kernel: [ 14.924418] Bluetooth: HCI socket layer initialized Oct 5 17:18:54 taoseeker kernel: [ 14.924427] Bluetooth: L2CAP socket layer initialized Oct 5 17:18:54 taoseeker kernel: [ 14.924448] Bluetooth: SCO socket layer initialized Oct 5 17:18:54 taoseeker kernel: [ 14.985366] ieee80211 phy0: >Selected rate control algorithm 'minstrel_ht' Oct 5 17:18:54 taoseeker kernel: [ 14.986110] Registered led device: b43-phy0::tx Oct 5 17:18:54 taoseeker kernel: [ 14.986164] Registered led device: b43-phy0::rx Oct 5 17:18:54 taoseeker kernel: [ 14.986205] Registered led device: b43-phy0::radio Oct 5 17:18:54 taoseeker kernel: [ 15.058622] usbcore: registered new interface driver btusb Oct 5 17:18:54 taoseeker kernel: [ 15.267414] type=1400 audit(1349450334.250:2): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=606 comm="apparmor_parser" Oct 5 17:18:54 taoseeker kernel: [ 15.268505] type=1400 audit(1349450334.250:3): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/ntpd" pid=564 comm="apparmor_parser" Oct 5 17:18:54 taoseeker kernel: [ 15.270560] type=1400 audit(1349450334.250:4): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/ntpd" pid=571 comm="apparmor_parser" Oct 5 17:18:55 taoseeker kernel: [ 16.021917] input: Macintosh mouse button emulation as /devices/virtual/input/input6 Oct 5 17:18:55 taoseeker kernel: [ 16.738711] lp: driver loaded but no devices found Oct 5 17:18:55 taoseeker kernel: [ 16.805943] ppdev: user-space parallel port driver Oct 5 17:18:56 taoseeker kernel: [ 17.566361] Bluetooth: RFCOMM TTY layer initialized Oct 5 17:18:56 taoseeker kernel: [ 17.566383] Bluetooth: RFCOMM socket layer initialized Oct 5 17:18:56 taoseeker kernel: [ 17.566387] Bluetooth: RFCOMM ver 1.11 Oct 5 17:18:56 taoseeker kernel: [ 17.819704] type=1400 audit(1349450336.802:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=695 comm="apparmor_parser" Oct 5 17:18:56 taoseeker kernel: [ 17.820826] type=1400 audit(1349450336.802:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=695 comm="apparmor_parser" Oct 5 17:18:56 taoseeker kernel: [ 17.931563] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Oct 5 17:18:56 taoseeker kernel: [ 17.931578] Bluetooth: BNEP filters: protocol multicast Oct 5 17:18:57 taoseeker modem-manager[670]: ModemManager (version 0.5.999) starting... Oct 5 17:18:57 taoseeker kernel: [ 18.759437] type=1400 audit(1349450337.742:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=772 comm="apparmor_parser" Oct 5 17:18:57 taoseeker kernel: [ 18.760153] type=1400 audit(1349450337.742:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=772 comm="apparmor_parser" Oct 5 17:18:57 taoseeker kernel: [ 18.991998] type=1400 audit(1349450337.974:9): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=784 comm="apparmor_parser" Oct 5 17:18:57 taoseeker kernel: [ 18.994234] type=1400 audit(1349450337.974:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=784 comm="apparmor_parser" Oct 5 17:18:57 taoseeker kernel: [ 18.994724] type=1400 audit(1349450337.974:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=784 comm="apparmor_parser" Oct 5 17:18:59 taoseeker NetworkManager[800]: NetworkManager (version 0.9.6.0) is starting... Oct 5 17:18:59 taoseeker NetworkManager[800]: Read config file /etc/NetworkManager/NetworkManager.conf Oct 5 17:18:59 taoseeker NetworkManager[800]: WEXT support is enabled Oct 5 17:18:59 taoseeker kernel: [ 20.520530] type=1400 audit(1349450339.502:12): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=791 comm="apparmor_parser" Oct 5 17:18:59 taoseeker kernel: [ 20.532953] type=1400 audit(1349450339.514:13): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//sanitized_helper" pid=791 comm="apparmor_parser" Oct 5 17:18:59 taoseeker kernel: [ 20.537517] type=1400 audit(1349450339.518:14): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=791 comm="apparmor_parser" Oct 5 17:18:59 taoseeker kernel: [ 20.544514] type=1400 audit(1349450339.526:15): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer//sanitized_helper" pid=791 comm="apparmor_parser" Oct 5 17:18:59 taoseeker kernel: [ 20.546864] type=1400 audit(1349450339.526:16): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=791 comm="apparmor_parser" Oct 5 17:18:59 taoseeker kernel: [ 20.552067] type=1400 audit(1349450339.534:17): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer//sanitized_helper" pid=791 comm="apparmor_parser" Oct 5 17:18:59 taoseeker modem-manager[670]: Loaded plugin 'Wavecom' Oct 5 17:18:59 taoseeker modem-manager[670]: Loaded plugin 'Ericsson MBM' Oct 5 17:18:59 taoseeker modem-manager[670]: Loaded plugin 'SimTech' Oct 5 17:18:59 taoseeker modem-manager[670]: Loaded plugin 'Novatel' Oct 5 17:18:59 taoseeker modem-manager[670]: Loaded plugin 'Nokia' Oct 5 17:18:59 taoseeker modem-manager[670]: Loaded plugin 'AnyData' Oct 5 17:18:59 taoseeker modem-manager[670]: Loaded plugin 'MotoC' Oct 5 17:18:59 taoseeker modem-manager[670]: Loaded plugin 'Option High-Speed' Oct 5 17:18:59 taoseeker modem-manager[670]: Loaded plugin 'X22X' Oct 5 17:18:59 taoseeker modem-manager[670]: Loaded plugin 'Linktop' Oct 5 17:18:59 taoseeker modem-manager[670]: Loaded plugin 'Longcheer' Oct 5 17:18:59 taoseeker modem-manager[670]: Loaded plugin 'Sierra' Oct 5 17:18:59 taoseeker modem-manager[670]: Loaded plugin 'Option' Oct 5 17:18:59 taoseeker modem-manager[670]: Loaded plugin 'Gobi' Oct 5 17:18:59 taoseeker modem-manager[670]: Loaded plugin 'Samsung' Oct 5 17:18:59 taoseeker modem-manager[670]: Loaded plugin 'Huawei' Oct 5 17:18:59 taoseeker modem-manager[670]: Loaded plugin 'ZTE' Oct 5 17:18:59 taoseeker modem-manager[670]: Loaded plugin 'Cinterion' Oct 5 17:18:59 taoseeker modem-manager[670]: Loaded plugin 'Iridium' Oct 5 17:18:59 taoseeker modem-manager[670]: Loaded plugin 'Generic' Oct 5 17:18:59 taoseeker modem-manager[670]: Successfully loaded 20 plugins Oct 5 17:18:59 taoseeker kernel: [ 20.595455] type=1400 audit(1349450339.578:18): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=827 comm="apparmor_parser" Oct 5 17:18:59 taoseeker kernel: [ 20.596600] type=1400 audit(1349450339.578:19): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=827 comm="apparmor_parser" Oct 5 17:18:59 taoseeker kernel: [ 20.615412] type=1400 audit(1349450339.598:20): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/ntpd" pid=828 comm="apparmor_parser" Oct 5 17:18:59 taoseeker modem-manager[670]: (ttyPZ1) opening serial port... Oct 5 17:18:59 taoseeker modem-manager[670]: (ttyPZ1): port attributes not fully set Oct 5 17:18:59 taoseeker modem-manager[670]: (ttyPZ0) opening serial port... Oct 5 17:18:59 taoseeker modem-manager[670]: (ttyPZ0): port attributes not fully set Oct 5 17:18:59 taoseeker kernel: [ 20.904374] type=1400 audit(1349450339.886:21): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=830 comm="apparmor_parser" Oct 5 17:19:00 taoseeker NetworkManager[800]: DNS: loaded plugin dnsmasq Oct 5 17:19:02 taoseeker NetworkManager[800]: SCPlugin-Ifupdown: init! Oct 5 17:19:02 taoseeker NetworkManager[800]: SCPlugin-Ifupdown: update_system_hostname Oct 5 17:19:02 taoseeker NetworkManager[800]: SCPluginIfupdown: management mode: unmanaged Oct 5 17:19:02 taoseeker NetworkManager[800]: SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0001:10/0001:10:12.0/ssb0:0/net/wlan2, iface: wlan2) Oct 5 17:19:02 taoseeker NetworkManager[800]: SCPlugin-Ifupdown: device added (path: /sys/devices/pci0001:10/0001:10:12.0/ssb0:0/net/wlan2, iface: wlan2): no ifupdown configuration found. Oct 5 17:19:02 taoseeker NetworkManager[800]: SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0002:20/0002:20:0f.0/net/eth0, iface: eth0) Oct 5 17:19:02 taoseeker NetworkManager[800]: SCPlugin-Ifupdown: device added (path: /sys/devices/pci0002:20/0002:20:0f.0/net/eth0, iface: eth0): no ifupdown configuration found. Oct 5 17:19:02 taoseeker NetworkManager[800]: SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/lo, iface: lo) Oct 5 17:19:02 taoseeker NetworkManager[800]: SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/lo, iface: lo): no ifupdown configuration found. Oct 5 17:19:02 taoseeker NetworkManager[800]: SCPlugin-Ifupdown: end _init. Oct 5 17:19:02 taoseeker NetworkManager[800]: Loaded plugin ifupdown: (C) 2008 Canonical Ltd. To report bugs please use the NetworkManager mailing list. Oct 5 17:19:02 taoseeker NetworkManager[800]: Loaded plugin keyfile: (c) 2007 - 2010 Red Hat, Inc. To report bugs please use the NetworkManager mailing list. Oct 5 17:19:02 taoseeker NetworkManager[800]: Ifupdown: get unmanaged devices count: 0 Oct 5 17:19:02 taoseeker NetworkManager[800]: SCPlugin-Ifupdown: (270939552) ... get_connections. Oct 5 17:19:02 taoseeker NetworkManager[800]: SCPlugin-Ifupdown: (270939552) ... get_connections (managed=false): return empty list. Oct 5 17:19:03 taoseeker NetworkManager[800]: keyfile: parsing Auto Ethernet ... Oct 5 17:19:03 taoseeker NetworkManager[800]: keyfile: read connection 'Auto Ethernet' Oct 5 17:19:03 taoseeker NetworkManager[800]: keyfile: parsing Telenor6904ett ... Oct 5 17:19:03 taoseeker NetworkManager[800]: keyfile: read connection 'Telenor6904ett' Oct 5 17:19:03 taoseeker NetworkManager[800]: Ifupdown: get unmanaged devices count: 0 Oct 5 17:19:03 taoseeker NetworkManager[800]: modem-manager is now available Oct 5 17:19:03 taoseeker NetworkManager[800]: monitoring kernel firmware directory '/lib/firmware'. Oct 5 17:19:03 taoseeker NetworkManager[800]: found WiFi radio killswitch rfkill0 (at /sys/devices/pci0001:10/0001:10:12.0/ssb0:0/ieee80211/phy0/rfkill0) (driver (unknown)) Oct 5 17:19:03 taoseeker NetworkManager[800]: WiFi enabled by radio killswitch; enabled by state file Oct 5 17:19:03 taoseeker NetworkManager[800]: WWAN enabled by radio killswitch; enabled by state file Oct 5 17:19:03 taoseeker NetworkManager[800]: WiMAX enabled by radio killswitch; enabled by state file Oct 5 17:19:03 taoseeker NetworkManager[800]: Networking is enabled by state file Oct 5 17:19:03 taoseeker NetworkManager[800]: (wlan2): using nl80211 for WiFi device control Oct 5 17:19:03 taoseeker NetworkManager[800]: (wlan2): driver supports Access Point (AP) mode Oct 5 17:19:03 taoseeker NetworkManager[800]: (wlan2): new 802.11 WiFi device (driver: 'b43' ifindex: 3) Oct 5 17:19:03 taoseeker NetworkManager[800]: (wlan2): exported as /org/freedesktop/NetworkManager/Devices/0 Oct 5 17:19:03 taoseeker NetworkManager[800]: (wlan2): now managed Oct 5 17:19:03 taoseeker NetworkManager[800]: (wlan2): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2] Oct 5 17:19:03 taoseeker NetworkManager[800]: (wlan2): bringing up device. Oct 5 17:19:03 taoseeker kernel: [ 24.658968] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07) Oct 5 17:19:03 taoseeker NetworkManager[800]: (wlan2): preparing device. Oct 5 17:19:03 taoseeker kernel: [ 24.703895] IPv6: ADDRCONF(NETDEV_UP): wlan2: link is not ready Oct 5 17:19:03 taoseeker NetworkManager[800]: (wlan2): deactivating device (reason 'managed') [2] Oct 5 17:19:03 taoseeker kernel: [ 24.708295] IPv6: ADDRCONF(NETDEV_UP): wlan2: link is not ready Oct 5 17:19:03 taoseeker NetworkManager[800]: failed to allocate link cache: (-10) Operation not supported Oct 5 17:19:03 taoseeker NetworkManager[800]: (eth0): carrier is OFF Oct 5 17:19:03 taoseeker NetworkManager[800]: [1349450343.711414] [nm-device-ethernet.c:456] real_update_permanent_hw_address(): (eth0): unable to read permanent MAC address (error 0) Oct 5 17:19:03 taoseeker NetworkManager[800]: (eth0): new Ethernet device (driver: 'gem' ifindex: 2) Oct 5 17:19:03 taoseeker NetworkManager[800]: (eth0): exported as /org/freedesktop/NetworkManager/Devices/1 Oct 5 17:19:03 taoseeker NetworkManager[800]: (eth0): now managed Oct 5 17:19:03 taoseeker NetworkManager[800]: (eth0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2] Oct 5 17:19:03 taoseeker NetworkManager[800]: (eth0): bringing up device. Oct 5 17:19:03 taoseeker NetworkManager[800]: (eth0): preparing device. Oct 5 17:19:03 taoseeker NetworkManager[800]: (eth0): deactivating device (reason 'managed') [2] Oct 5 17:19:03 taoseeker kernel: [ 24.963276] sungem_phy: PHY ID: 4061e4, addr: 0 Oct 5 17:19:03 taoseeker kernel: [ 24.963632] gem 0002:20:0f.0: >eth0: Found BCM5221 PHY Oct 5 17:19:03 taoseeker kernel: [ 24.964485] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Oct 5 17:19:03 taoseeker kernel: [ 24.966009] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Oct 5 17:19:03 taoseeker NetworkManager[800]: /sys/devices/virtual/net/lo: couldn't determine device driver; ignoring... Oct 5 17:19:03 taoseeker NetworkManager[800]: /sys/devices/virtual/net/lo: couldn't determine device driver; ignoring... Oct 5 17:19:04 taoseeker NetworkManager[800]: wpa_supplicant started Oct 5 17:19:04 taoseeker NetworkManager[800]: (wlan2) supports 4 scan SSIDs Oct 5 17:19:04 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: starting -> ready Oct 5 17:19:04 taoseeker NetworkManager[800]: (wlan2): device state change: unavailable -> disconnected (reason 'supplicant-available') [20 30 42] Oct 5 17:19:04 taoseeker NetworkManager[800]: Trying to remove a non-existant call id. Oct 5 17:19:04 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: ready -> inactive Oct 5 17:19:04 taoseeker NetworkManager[800]: (wlan2) supports 4 scan SSIDs Oct 5 17:19:05 taoseeker NetworkManager[800]: Auto-activating connection 'Telenor6904ett'. Oct 5 17:19:05 taoseeker NetworkManager[800]: Activation (wlan2) starting connection 'Telenor6904ett' Oct 5 17:19:05 taoseeker NetworkManager[800]: (wlan2): device state change: disconnected -> prepare (reason 'none') [30 40 0] Oct 5 17:19:05 taoseeker NetworkManager[800]: Activation (wlan2) Stage 1 of 5 (Device Prepare) scheduled... Oct 5 17:19:05 taoseeker NetworkManager[800]: Activation (wlan2) Stage 1 of 5 (Device Prepare) started... Oct 5 17:19:05 taoseeker NetworkManager[800]: Activation (wlan2) Stage 2 of 5 (Device Configure) scheduled... Oct 5 17:19:05 taoseeker NetworkManager[800]: Activation (wlan2) Stage 1 of 5 (Device Prepare) complete. Oct 5 17:19:05 taoseeker NetworkManager[800]: Activation (wlan2) Stage 2 of 5 (Device Configure) starting... Oct 5 17:19:05 taoseeker NetworkManager[800]: (wlan2): device state change: prepare -> config (reason 'none') [40 50 0] Oct 5 17:19:05 taoseeker NetworkManager[800]: Activation (wlan2/wireless): connection 'Telenor6904ett' has security, and secrets exist. No new secrets needed. Oct 5 17:19:05 taoseeker NetworkManager[800]: Config: added 'ssid' value 'Telenor6904ett' Oct 5 17:19:05 taoseeker NetworkManager[800]: Config: added 'scan_ssid' value '1' Oct 5 17:19:05 taoseeker NetworkManager[800]: Config: added 'key_mgmt' value 'WPA-PSK' Oct 5 17:19:05 taoseeker NetworkManager[800]: Config: added 'auth_alg' value 'OPEN' Oct 5 17:19:05 taoseeker NetworkManager[800]: Config: added 'psk' value '' Oct 5 17:19:05 taoseeker NetworkManager[800]: Activation (wlan2) Stage 2 of 5 (Device Configure) complete. Oct 5 17:19:05 taoseeker NetworkManager[800]: Config: set interface ap_scan to 1 Oct 5 17:19:05 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: inactive -> scanning Oct 5 17:19:06 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:19:06 taoseeker kernel: [ 27.805268] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:19:06 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:19:06 taoseeker kernel: [ 27.827219] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:19:07 taoseeker kernel: [ 28.030948] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:19:07 taoseeker kernel: [ 28.234863] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 17:19:07 taoseeker kernel: [ 28.438857] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 17:19:07 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 17:19:07 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:19:08 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:19:08 taoseeker kernel: [ 29.696053] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:19:08 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:19:08 taoseeker kernel: [ 29.707324] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:19:08 taoseeker kernel: [ 29.910843] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:19:09 taoseeker kernel: [ 30.114888] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 17:19:09 taoseeker kernel: [ 30.318841] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 17:19:09 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 17:19:09 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:19:10 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:19:10 taoseeker kernel: [ 31.576017] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:19:10 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:19:10 taoseeker kernel: [ 31.587257] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:19:10 taoseeker kernel: [ 31.790820] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:19:10 taoseeker kernel: [ 31.994843] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 17:19:11 taoseeker kernel: [ 32.198889] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 17:19:11 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 17:19:11 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:19:12 taoseeker modem-manager[670]: (ttyPZ1) closing serial port... Oct 5 17:19:12 taoseeker modem-manager[670]: (ttyPZ1) serial port closed Oct 5 17:19:12 taoseeker modem-manager[670]: (ttyPZ1) opening serial port... Oct 5 17:19:12 taoseeker modem-manager[670]: (ttyPZ0) closing serial port... Oct 5 17:19:12 taoseeker modem-manager[670]: (ttyPZ0) serial port closed Oct 5 17:19:12 taoseeker modem-manager[670]: (ttyPZ0) opening serial port... Oct 5 17:19:12 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:19:12 taoseeker kernel: [ 33.464058] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:19:12 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:19:12 taoseeker kernel: [ 33.475175] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:19:12 taoseeker kernel: [ 33.478995] wlan2: authenticated Oct 5 17:19:12 taoseeker wpa_supplicant[1011]: wlan2: Trying to associate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:19:12 taoseeker kernel: [ 33.482729] wlan2: associating with AP with corrupt beacon Oct 5 17:19:12 taoseeker kernel: [ 33.482856] wlan2: associate with 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:19:12 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> associating Oct 5 17:19:12 taoseeker kernel: [ 33.686908] wlan2: associate with 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:19:12 taoseeker kernel: [ 33.689492] wlan2: RX AssocResp from 50:67:f0:d3:ed:c4 (capab=0xc11 status=0 aid=1) Oct 5 17:19:12 taoseeker kernel: [ 33.690012] wlan2: associated Oct 5 17:19:12 taoseeker kernel: [ 33.690595] IPv6: ADDRCONF(NETDEV_CHANGE): wlan2: link becomes ready Oct 5 17:19:12 taoseeker kernel: [ 33.690870] cfg80211: Pending regulatory request, waiting for it to be processed... Oct 5 17:19:12 taoseeker wpa_supplicant[1011]: wlan2: Associated with 50:67:f0:d3:ed:c4 Oct 5 17:19:12 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associating -> associated Oct 5 17:19:13 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associated -> 4-way handshake Oct 5 17:19:13 taoseeker wpa_supplicant[1011]: wlan2: WPA: Key negotiation completed with 50:67:f0:d3:ed:c4 [PTK=CCMP GTK=CCMP] Oct 5 17:19:13 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-CONNECTED - Connection to 50:67:f0:d3:ed:c4 completed (auth) [id=0 id_str=] Oct 5 17:19:13 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: 4-way handshake -> completed Oct 5 17:19:13 taoseeker NetworkManager[800]: Activation (wlan2/wireless) Stage 2 of 5 (Device Configure) successful. Connected to wireless network 'Telenor6904ett'. Oct 5 17:19:13 taoseeker NetworkManager[800]: Activation (wlan2) Stage 3 of 5 (IP Configure Start) scheduled. Oct 5 17:19:13 taoseeker NetworkManager[800]: Activation (wlan2) Stage 3 of 5 (IP Configure Start) started... Oct 5 17:19:13 taoseeker NetworkManager[800]: (wlan2): device state change: config -> ip-config (reason 'none') [50 70 0] Oct 5 17:19:13 taoseeker NetworkManager[800]: Activation (wlan2) Beginning DHCPv4 transaction (timeout in 45 seconds) Oct 5 17:19:13 taoseeker NetworkManager[800]: dhclient started with pid 1212 Oct 5 17:19:13 taoseeker NetworkManager[800]: Activation (wlan2) Beginning IP6 addrconf. Oct 5 17:19:13 taoseeker NetworkManager[800]: Activation (wlan2) Stage 3 of 5 (IP Configure Start) complete. Oct 5 17:19:15 taoseeker dhclient: Internet Systems Consortium DHCP Client 4.2.4 Oct 5 17:19:15 taoseeker dhclient: Copyright 2004-2012 Internet Systems Consortium. Oct 5 17:19:15 taoseeker dhclient: All rights reserved. Oct 5 17:19:15 taoseeker dhclient: For info, please visit https://www.isc.org/software/dhcp/ Oct 5 17:19:15 taoseeker dhclient: Oct 5 17:19:15 taoseeker dhclient: Listening on LPF/wlan2/00:14:51:81:6a:17 Oct 5 17:19:15 taoseeker dhclient: Sending on LPF/wlan2/00:14:51:81:6a:17 Oct 5 17:19:15 taoseeker NetworkManager[800]: (wlan2): DHCPv4 state changed nbi -> preinit Oct 5 17:19:15 taoseeker dhclient: Sending on Socket/fallback Oct 5 17:19:15 taoseeker dhclient: DHCPREQUEST of 10.0.0.66 on wlan2 to 255.255.255.255 port 67 Oct 5 17:19:15 taoseeker dhclient: DHCPACK of 10.0.0.66 from 10.0.0.138 Oct 5 17:19:15 taoseeker dhclient: bound to 10.0.0.66 -- renewal in 35054 seconds. Oct 5 17:19:15 taoseeker NetworkManager[800]: (wlan2): DHCPv4 state changed preinit -> reboot Oct 5 17:19:15 taoseeker NetworkManager[800]: address 10.0.0.66 Oct 5 17:19:15 taoseeker NetworkManager[800]: prefix 24 (255.255.255.0) Oct 5 17:19:15 taoseeker NetworkManager[800]: gateway 10.0.0.138 Oct 5 17:19:15 taoseeker NetworkManager[800]: hostname 'taoseeker' Oct 5 17:19:15 taoseeker NetworkManager[800]: nameserver '130.67.15.198' Oct 5 17:19:15 taoseeker NetworkManager[800]: nameserver '193.213.112.4' Oct 5 17:19:15 taoseeker NetworkManager[800]: nameserver '10.0.0.138' Oct 5 17:19:15 taoseeker NetworkManager[800]: domain name 'lan' Oct 5 17:19:15 taoseeker NetworkManager[800]: Activation (wlan2) Stage 5 of 5 (IPv4 Configure Commit) scheduled... Oct 5 17:19:15 taoseeker NetworkManager[800]: Activation (wlan2) Stage 5 of 5 (IPv4 Commit) started... Oct 5 17:19:16 taoseeker NetworkManager[800]: (wlan2): device state change: ip-config -> activated (reason 'none') [70 100 0] Oct 5 17:19:17 taoseeker NetworkManager[800]: DNS: starting dnsmasq... Oct 5 17:19:17 taoseeker NetworkManager[800]: [1349450357.169751] [nm-dns-dnsmasq.c:390] update(): dnsmasq not available on the bus, can't update servers. Oct 5 17:19:17 taoseeker NetworkManager[800]: [1349450357.169885] [nm-dns-dnsmasq.c:392] update(): dnsmasq owner not found on bus: Could not get owner of name 'org.freedesktop.NetworkManager.dnsmasq': no such name Oct 5 17:19:17 taoseeker NetworkManager[800]: DNS: plugin dnsmasq update failed Oct 5 17:19:17 taoseeker NetworkManager[800]: ((null)): writing resolv.conf to /sbin/resolvconf Oct 5 17:19:17 taoseeker NetworkManager[800]: Policy set 'Telenor6904ett' (wlan2) as default for IPv4 routing and DNS. Oct 5 17:19:17 taoseeker NetworkManager[800]: Activation (wlan2) successful, device activated. Oct 5 17:19:17 taoseeker NetworkManager[800]: Activation (wlan2) Stage 5 of 5 (IPv4 Commit) complete. Oct 5 17:19:17 taoseeker NetworkManager[800]: dnsmasq appeared on DBus: :1.24 Oct 5 17:19:17 taoseeker NetworkManager[800]: ((null)): writing resolv.conf to /sbin/resolvconf Oct 5 17:19:18 taoseeker modem-manager[670]: (ttyPZ1) closing serial port... Oct 5 17:19:18 taoseeker modem-manager[670]: (ttyPZ1) serial port closed Oct 5 17:19:18 taoseeker modem-manager[670]: (ttyPZ0) closing serial port... Oct 5 17:19:18 taoseeker modem-manager[670]: (ttyPZ0) serial port closed Oct 5 17:19:18 taoseeker modem-manager[670]: (ttyPZ1) opening serial port... Oct 5 17:19:18 taoseeker modem-manager[670]: (ttyPZ1): port attributes not fully set Oct 5 17:19:18 taoseeker modem-manager[670]: (ttyPZ0) opening serial port... Oct 5 17:19:18 taoseeker modem-manager[670]: (ttyPZ0): port attributes not fully set Oct 5 17:19:22 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-DISCONNECTED bssid=50:67:f0:d3:ed:c4 reason=4 Oct 5 17:19:22 taoseeker kernel: [ 43.334715] ieee80211 phy0: >wlan2: No probe response from AP 50:67:f0:d3:ed:c4 after 500ms, disconnecting. Oct 5 17:19:22 taoseeker kernel: [ 43.336740] cfg80211: All devices are disconnected, going to restore regulatory settings Oct 5 17:19:22 taoseeker kernel: [ 43.336756] cfg80211: Restoring regulatory settings Oct 5 17:19:22 taoseeker kernel: [ 43.336770] cfg80211: Calling CRDA for country: NO Oct 5 17:19:22 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: completed -> disconnected Oct 5 17:19:22 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:19:23 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:19:23 taoseeker kernel: [ 44.591935] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:19:23 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:19:23 taoseeker kernel: [ 44.603075] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:19:23 taoseeker wpa_supplicant[1011]: wlan2: Trying to associate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:19:23 taoseeker kernel: [ 44.608120] wlan2: authenticated Oct 5 17:19:23 taoseeker kernel: [ 44.608673] wlan2: associating with AP with corrupt beacon Oct 5 17:19:23 taoseeker kernel: [ 44.611102] wlan2: associate with 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:19:23 taoseeker wpa_supplicant[1011]: wlan2: Associated with 50:67:f0:d3:ed:c4 Oct 5 17:19:23 taoseeker kernel: [ 44.615194] wlan2: RX AssocResp from 50:67:f0:d3:ed:c4 (capab=0xc11 status=0 aid=1) Oct 5 17:19:23 taoseeker kernel: [ 44.616000] wlan2: associated Oct 5 17:19:23 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> associating Oct 5 17:19:23 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associating -> associated Oct 5 17:19:24 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associated -> 4-way handshake Oct 5 17:19:24 taoseeker wpa_supplicant[1011]: wlan2: WPA: Key negotiation completed with 50:67:f0:d3:ed:c4 [PTK=CCMP GTK=CCMP] Oct 5 17:19:24 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-CONNECTED - Connection to 50:67:f0:d3:ed:c4 completed (reauth) [id=0 id_str=] Oct 5 17:19:24 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: 4-way handshake -> completed Oct 5 17:19:30 taoseeker modem-manager[670]: (ttyPZ1) closing serial port... Oct 5 17:19:30 taoseeker modem-manager[670]: (ttyPZ1) serial port closed Oct 5 17:19:30 taoseeker modem-manager[670]: (ttyPZ1) opening serial port... Oct 5 17:19:30 taoseeker modem-manager[670]: (ttyPZ0) closing serial port... Oct 5 17:19:30 taoseeker modem-manager[670]: (ttyPZ0) serial port closed Oct 5 17:19:30 taoseeker modem-manager[670]: (ttyPZ0) opening serial port... Oct 5 17:19:34 taoseeker NetworkManager[800]: (wlan2): IP6 addrconf timed out or failed. Oct 5 17:19:34 taoseeker NetworkManager[800]: Activation (wlan2) Stage 4 of 5 (IPv6 Configure Timeout) scheduled... Oct 5 17:19:34 taoseeker NetworkManager[800]: Activation (wlan2) Stage 4 of 5 (IPv6 Configure Timeout) started... Oct 5 17:19:34 taoseeker NetworkManager[800]: Activation (wlan2) Stage 4 of 5 (IPv6 Configure Timeout) complete. Oct 5 17:19:36 taoseeker modem-manager[670]: (ttyPZ1) closing serial port... Oct 5 17:19:36 taoseeker modem-manager[670]: (ttyPZ1) serial port closed Oct 5 17:19:36 taoseeker modem-manager[670]: (ttyPZ0) closing serial port... Oct 5 17:19:36 taoseeker modem-manager[670]: (ttyPZ0) serial port closed Oct 5 17:20:04 taoseeker kernel: [ 84.777668] ondemand governor failed, too long transition latency of HW, fallback to performance governor Oct 5 17:24:55 taoseeker wpa_supplicant[1011]: wlan2: WPA: Group rekeying completed with 50:67:f0:d3:ed:c4 [GTK=CCMP] Oct 5 17:37:36 taoseeker NetworkManager[800]: nl_recvmsgs() error: (-33) Dump inconsistency detected, interrupted Oct 5 17:41:00 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-DISCONNECTED bssid=50:67:f0:d3:ed:c4 reason=4 Oct 5 17:41:00 taoseeker kernel: [ 1340.497597] ieee80211 phy0: >wlan2: No probe response from AP 50:67:f0:d3:ed:c4 after 500ms, disconnecting. Oct 5 17:41:00 taoseeker kernel: [ 1340.499712] cfg80211: All devices are disconnected, going to restore regulatory settings Oct 5 17:41:00 taoseeker kernel: [ 1340.499730] cfg80211: Restoring regulatory settings Oct 5 17:41:00 taoseeker kernel: [ 1340.499743] cfg80211: Calling CRDA to update world regulatory domain Oct 5 17:41:00 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: completed -> disconnected Oct 5 17:41:00 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:41:01 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:41:01 taoseeker kernel: [ 1341.762794] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:41:01 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:41:01 taoseeker kernel: [ 1341.773913] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:41:01 taoseeker kernel: [ 1341.775920] wlan2: authenticated Oct 5 17:41:01 taoseeker wpa_supplicant[1011]: wlan2: Trying to associate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:41:01 taoseeker kernel: [ 1341.780362] wlan2: associating with AP with corrupt beacon Oct 5 17:41:01 taoseeker kernel: [ 1341.781920] wlan2: associate with 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:41:01 taoseeker kernel: [ 1341.784402] wlan2: RX AssocResp from 50:67:f0:d3:ed:c4 (capab=0xc11 status=0 aid=1) Oct 5 17:41:01 taoseeker kernel: [ 1341.785139] wlan2: associated Oct 5 17:41:01 taoseeker kernel: [ 1341.785840] cfg80211: Pending regulatory request, waiting for it to be processed... Oct 5 17:41:01 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> associating Oct 5 17:41:01 taoseeker wpa_supplicant[1011]: wlan2: Associated with 50:67:f0:d3:ed:c4 Oct 5 17:41:01 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associating -> associated Oct 5 17:41:02 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associated -> 4-way handshake Oct 5 17:41:02 taoseeker wpa_supplicant[1011]: wlan2: WPA: Key negotiation completed with 50:67:f0:d3:ed:c4 [PTK=CCMP GTK=CCMP] Oct 5 17:41:02 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-CONNECTED - Connection to 50:67:f0:d3:ed:c4 completed (reauth) [id=0 id_str=] Oct 5 17:41:02 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: 4-way handshake -> completed Oct 5 17:41:26 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-DISCONNECTED bssid=50:67:f0:d3:ed:c4 reason=4 Oct 5 17:41:26 taoseeker kernel: [ 1366.497228] ieee80211 phy0: >wlan2: No probe response from AP 50:67:f0:d3:ed:c4 after 500ms, disconnecting. Oct 5 17:41:26 taoseeker kernel: [ 1366.500391] cfg80211: All devices are disconnected, going to restore regulatory settings Oct 5 17:41:26 taoseeker kernel: [ 1366.500408] cfg80211: Restoring regulatory settings Oct 5 17:41:26 taoseeker kernel: [ 1366.500421] cfg80211: Calling CRDA to update world regulatory domain Oct 5 17:41:26 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: completed -> disconnected Oct 5 17:41:26 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:41:27 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:41:27 taoseeker kernel: [ 1367.754489] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:41:27 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:41:27 taoseeker kernel: [ 1367.765564] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:41:27 taoseeker wpa_supplicant[1011]: wlan2: Trying to associate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:41:27 taoseeker kernel: [ 1367.773590] wlan2: authenticated Oct 5 17:41:27 taoseeker kernel: [ 1367.774124] wlan2: associating with AP with corrupt beacon Oct 5 17:41:27 taoseeker kernel: [ 1367.777236] wlan2: associate with 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:41:27 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> associating Oct 5 17:41:27 taoseeker kernel: [ 1367.792877] wlan2: RX AssocResp from 50:67:f0:d3:ed:c4 (capab=0xc11 status=0 aid=1) Oct 5 17:41:27 taoseeker kernel: [ 1367.793386] wlan2: associated Oct 5 17:41:27 taoseeker kernel: [ 1367.794042] cfg80211: Pending regulatory request, waiting for it to be processed... Oct 5 17:41:27 taoseeker wpa_supplicant[1011]: wlan2: Associated with 50:67:f0:d3:ed:c4 Oct 5 17:41:27 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associating -> associated Oct 5 17:41:28 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associated -> 4-way handshake Oct 5 17:41:28 taoseeker wpa_supplicant[1011]: wlan2: WPA: Key negotiation completed with 50:67:f0:d3:ed:c4 [PTK=CCMP GTK=CCMP] Oct 5 17:41:28 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-CONNECTED - Connection to 50:67:f0:d3:ed:c4 completed (reauth) [id=0 id_str=] Oct 5 17:41:28 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: 4-way handshake -> completed Oct 5 17:41:34 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-DISCONNECTED bssid=50:67:f0:d3:ed:c4 reason=4 Oct 5 17:41:34 taoseeker kernel: [ 1374.497132] ieee80211 phy0: >wlan2: No probe response from AP 50:67:f0:d3:ed:c4 after 500ms, disconnecting. Oct 5 17:41:34 taoseeker kernel: [ 1374.499151] cfg80211: All devices are disconnected, going to restore regulatory settings Oct 5 17:41:34 taoseeker kernel: [ 1374.499166] cfg80211: Restoring regulatory settings Oct 5 17:41:34 taoseeker kernel: [ 1374.499180] cfg80211: Calling CRDA for country: NO Oct 5 17:41:34 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: completed -> disconnected Oct 5 17:41:34 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:41:35 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:41:35 taoseeker kernel: [ 1375.754280] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:41:35 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:41:35 taoseeker kernel: [ 1375.765446] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:41:35 taoseeker wpa_supplicant[1011]: wlan2: Trying to associate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:41:35 taoseeker kernel: [ 1375.969086] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:41:35 taoseeker kernel: [ 1375.971528] wlan2: authenticated Oct 5 17:41:35 taoseeker kernel: [ 1375.972650] wlan2: associating with AP with corrupt beacon Oct 5 17:41:35 taoseeker kernel: [ 1375.973496] wlan2: associate with 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:41:35 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> associating Oct 5 17:41:35 taoseeker kernel: [ 1375.980336] wlan2: RX AssocResp from 50:67:f0:d3:ed:c4 (capab=0xc11 status=0 aid=1) Oct 5 17:41:35 taoseeker kernel: [ 1375.980821] wlan2: associated Oct 5 17:41:35 taoseeker wpa_supplicant[1011]: wlan2: Associated with 50:67:f0:d3:ed:c4 Oct 5 17:41:35 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associating -> associated Oct 5 17:41:36 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associated -> 4-way handshake Oct 5 17:41:36 taoseeker wpa_supplicant[1011]: wlan2: WPA: Key negotiation completed with 50:67:f0:d3:ed:c4 [PTK=CCMP GTK=CCMP] Oct 5 17:41:36 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-CONNECTED - Connection to 50:67:f0:d3:ed:c4 completed (reauth) [id=0 id_str=] Oct 5 17:41:36 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: 4-way handshake -> completed Oct 5 17:41:51 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-DISCONNECTED bssid=50:67:f0:d3:ed:c4 reason=4 Oct 5 17:41:51 taoseeker kernel: [ 1391.496887] ieee80211 phy0: >wlan2: No probe response from AP 50:67:f0:d3:ed:c4 after 500ms, disconnecting. Oct 5 17:41:51 taoseeker kernel: [ 1391.499225] cfg80211: All devices are disconnected, going to restore regulatory settings Oct 5 17:41:51 taoseeker kernel: [ 1391.499242] cfg80211: Restoring regulatory settings Oct 5 17:41:51 taoseeker kernel: [ 1391.499256] cfg80211: Calling CRDA to update world regulatory domain Oct 5 17:41:51 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: completed -> disconnected Oct 5 17:41:51 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:41:52 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:41:52 taoseeker kernel: [ 1392.755710] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:41:52 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:41:52 taoseeker kernel: [ 1392.765208] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:41:52 taoseeker kernel: [ 1392.968854] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:41:53 taoseeker kernel: [ 1393.172851] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 17:41:53 taoseeker kernel: [ 1393.376840] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 17:41:53 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 17:41:53 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:41:54 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:41:54 taoseeker kernel: [ 1394.633968] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:41:54 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:41:54 taoseeker kernel: [ 1394.653067] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:41:54 taoseeker kernel: [ 1394.856832] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:41:54 taoseeker NetworkManager[800]: (wlan2): roamed from BSSID 50:67:F0:D3:ED:C4 (Telenor6904ett) to (none) ((none)) Oct 5 17:41:54 taoseeker kernel: [ 1395.060830] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 17:41:55 taoseeker kernel: [ 1395.264826] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 17:41:55 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 17:41:55 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:41:56 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:41:56 taoseeker kernel: [ 1396.524403] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:41:56 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:41:56 taoseeker kernel: [ 1396.533170] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:41:56 taoseeker kernel: [ 1396.536705] wlan2: authenticated Oct 5 17:41:56 taoseeker wpa_supplicant[1011]: wlan2: Trying to associate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:41:56 taoseeker kernel: [ 1396.539917] wlan2: associating with AP with corrupt beacon Oct 5 17:41:56 taoseeker kernel: [ 1396.541152] wlan2: associate with 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:41:56 taoseeker wpa_supplicant[1011]: wlan2: Associated with 50:67:f0:d3:ed:c4 Oct 5 17:41:56 taoseeker kernel: [ 1396.545044] wlan2: RX AssocResp from 50:67:f0:d3:ed:c4 (capab=0xc11 status=0 aid=1) Oct 5 17:41:56 taoseeker kernel: [ 1396.545535] wlan2: associated Oct 5 17:41:56 taoseeker kernel: [ 1396.546186] cfg80211: Pending regulatory request, waiting for it to be processed... Oct 5 17:41:56 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> associating Oct 5 17:41:56 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associating -> associated Oct 5 17:41:57 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associated -> 4-way handshake Oct 5 17:41:57 taoseeker wpa_supplicant[1011]: wlan2: WPA: Key negotiation completed with 50:67:f0:d3:ed:c4 [PTK=CCMP GTK=CCMP] Oct 5 17:41:57 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-CONNECTED - Connection to 50:67:f0:d3:ed:c4 completed (reauth) [id=0 id_str=] Oct 5 17:41:57 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: 4-way handshake -> completed Oct 5 17:42:00 taoseeker NetworkManager[800]: (wlan2): roamed from BSSID (none) ((none)) to 50:67:F0:D3:ED:C4 (Telenor6904ett) Oct 5 17:42:02 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-DISCONNECTED bssid=50:67:f0:d3:ed:c4 reason=4 Oct 5 17:42:02 taoseeker kernel: [ 1402.496739] ieee80211 phy0: >wlan2: No probe response from AP 50:67:f0:d3:ed:c4 after 500ms, disconnecting. Oct 5 17:42:02 taoseeker kernel: [ 1402.498618] cfg80211: All devices are disconnected, going to restore regulatory settings Oct 5 17:42:02 taoseeker kernel: [ 1402.498635] cfg80211: Restoring regulatory settings Oct 5 17:42:02 taoseeker kernel: [ 1402.498649] cfg80211: Calling CRDA for country: NO Oct 5 17:42:02 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: completed -> disconnected Oct 5 17:42:02 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:42:03 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:42:03 taoseeker kernel: [ 1403.755540] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:42:03 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:42:03 taoseeker kernel: [ 1403.765071] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:42:03 taoseeker kernel: [ 1403.968709] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:42:04 taoseeker wpa_supplicant[1011]: wlan2: Trying to associate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:42:04 taoseeker kernel: [ 1404.172710] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 17:42:04 taoseeker kernel: [ 1404.176087] wlan2: authenticated Oct 5 17:42:04 taoseeker kernel: [ 1404.177609] wlan2: associating with AP with corrupt beacon Oct 5 17:42:04 taoseeker kernel: [ 1404.180729] wlan2: associate with 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:42:04 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> associating Oct 5 17:42:04 taoseeker wpa_supplicant[1011]: wlan2: Associated with 50:67:f0:d3:ed:c4 Oct 5 17:42:04 taoseeker kernel: [ 1404.186241] wlan2: RX AssocResp from 50:67:f0:d3:ed:c4 (capab=0xc11 status=0 aid=1) Oct 5 17:42:04 taoseeker kernel: [ 1404.186735] wlan2: associated Oct 5 17:42:04 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associating -> associated Oct 5 17:42:04 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associated -> 4-way handshake Oct 5 17:42:07 taoseeker wpa_supplicant[1011]: wlan2: WPA: Key negotiation completed with 50:67:f0:d3:ed:c4 [PTK=CCMP GTK=CCMP] Oct 5 17:42:07 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-CONNECTED - Connection to 50:67:f0:d3:ed:c4 completed (reauth) [id=0 id_str=] Oct 5 17:42:07 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: 4-way handshake -> completed Oct 5 17:42:21 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-DISCONNECTED bssid=50:67:f0:d3:ed:c4 reason=4 Oct 5 17:42:21 taoseeker kernel: [ 1421.496502] ieee80211 phy0: >wlan2: No probe response from AP 50:67:f0:d3:ed:c4 after 500ms, disconnecting. Oct 5 17:42:21 taoseeker kernel: [ 1421.497798] cfg80211: All devices are disconnected, going to restore regulatory settings Oct 5 17:42:21 taoseeker kernel: [ 1421.497812] cfg80211: Restoring regulatory settings Oct 5 17:42:21 taoseeker kernel: [ 1421.497823] cfg80211: Calling CRDA to update world regulatory domain Oct 5 17:42:21 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: completed -> disconnected Oct 5 17:42:21 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:42:22 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:42:22 taoseeker kernel: [ 1422.759373] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:42:22 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:42:22 taoseeker kernel: [ 1422.768824] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:42:22 taoseeker kernel: [ 1422.972449] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:42:23 taoseeker wpa_supplicant[1011]: wlan2: Trying to associate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:42:23 taoseeker kernel: [ 1423.176448] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 17:42:23 taoseeker kernel: [ 1423.178879] wlan2: authenticated Oct 5 17:42:23 taoseeker kernel: [ 1423.180079] wlan2: associating with AP with corrupt beacon Oct 5 17:42:23 taoseeker kernel: [ 1423.180483] wlan2: associate with 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:42:23 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> associating Oct 5 17:42:23 taoseeker kernel: [ 1423.187415] wlan2: RX AssocResp from 50:67:f0:d3:ed:c4 (capab=0xc11 status=0 aid=1) Oct 5 17:42:23 taoseeker kernel: [ 1423.187910] wlan2: associated Oct 5 17:42:23 taoseeker kernel: [ 1423.188616] cfg80211: Pending regulatory request, waiting for it to be processed... Oct 5 17:42:23 taoseeker wpa_supplicant[1011]: wlan2: Associated with 50:67:f0:d3:ed:c4 Oct 5 17:42:23 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associating -> associated Oct 5 17:42:23 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associated -> 4-way handshake Oct 5 17:42:23 taoseeker wpa_supplicant[1011]: wlan2: WPA: Key negotiation completed with 50:67:f0:d3:ed:c4 [PTK=CCMP GTK=CCMP] Oct 5 17:42:23 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-CONNECTED - Connection to 50:67:f0:d3:ed:c4 completed (reauth) [id=0 id_str=] Oct 5 17:42:23 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: 4-way handshake -> completed Oct 5 17:42:26 taoseeker kernel: [ 1426.742869] wlan2: deauthenticated from 50:67:f0:d3:ed:c4 (Reason: 15) Oct 5 17:42:26 taoseeker kernel: [ 1426.744187] cfg80211: All devices are disconnected, going to restore regulatory settings Oct 5 17:42:26 taoseeker kernel: [ 1426.744201] cfg80211: Restoring regulatory settings Oct 5 17:42:26 taoseeker kernel: [ 1426.744213] cfg80211: Calling CRDA to update world regulatory domain Oct 5 17:42:26 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-DISCONNECTED bssid=50:67:f0:d3:ed:c4 reason=15 Oct 5 17:42:26 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: completed -> disconnected Oct 5 17:42:26 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:42:27 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:42:27 taoseeker kernel: [ 1428.011227] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:42:27 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:42:27 taoseeker kernel: [ 1428.020742] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:42:28 taoseeker kernel: [ 1428.224379] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:42:28 taoseeker kernel: [ 1428.428368] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 17:42:28 taoseeker kernel: [ 1428.632360] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 17:42:28 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 17:42:28 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:42:29 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:42:29 taoseeker kernel: [ 1429.891465] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:42:29 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:42:29 taoseeker kernel: [ 1429.900717] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:42:30 taoseeker kernel: [ 1430.104360] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:42:30 taoseeker kernel: [ 1430.308349] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 17:42:30 taoseeker kernel: [ 1430.512336] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 17:42:30 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 17:42:30 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:42:31 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:42:31 taoseeker kernel: [ 1431.774552] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:42:31 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:42:31 taoseeker kernel: [ 1431.780996] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:42:31 taoseeker kernel: [ 1431.984329] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:42:32 taoseeker kernel: [ 1432.188326] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 17:42:32 taoseeker kernel: [ 1432.392314] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 17:42:32 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 17:42:32 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:42:33 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:42:33 taoseeker kernel: [ 1433.651467] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:42:33 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:42:33 taoseeker kernel: [ 1433.660960] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:42:33 taoseeker wpa_supplicant[1011]: wlan2: Trying to associate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:42:33 taoseeker kernel: [ 1433.665132] wlan2: authenticated Oct 5 17:42:33 taoseeker kernel: [ 1433.668717] wlan2: associating with AP with corrupt beacon Oct 5 17:42:33 taoseeker kernel: [ 1433.672650] wlan2: associate with 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:42:33 taoseeker kernel: [ 1433.675158] wlan2: RX AssocResp from 50:67:f0:d3:ed:c4 (capab=0xc11 status=0 aid=1) Oct 5 17:42:33 taoseeker kernel: [ 1433.675665] wlan2: associated Oct 5 17:42:33 taoseeker kernel: [ 1433.676364] cfg80211: Pending regulatory request, waiting for it to be processed... Oct 5 17:42:33 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> associating Oct 5 17:42:33 taoseeker wpa_supplicant[1011]: wlan2: Associated with 50:67:f0:d3:ed:c4 Oct 5 17:42:33 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associating -> associated Oct 5 17:42:34 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associated -> 4-way handshake Oct 5 17:42:35 taoseeker wpa_supplicant[1011]: wlan2: WPA: Key negotiation completed with 50:67:f0:d3:ed:c4 [PTK=CCMP GTK=CCMP] Oct 5 17:42:35 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-CONNECTED - Connection to 50:67:f0:d3:ed:c4 completed (reauth) [id=0 id_str=] Oct 5 17:42:35 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: 4-way handshake -> completed Oct 5 17:42:49 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-DISCONNECTED bssid=50:67:f0:d3:ed:c4 reason=4 Oct 5 17:42:49 taoseeker kernel: [ 1449.500106] ieee80211 phy0: >wlan2: No probe response from AP 50:67:f0:d3:ed:c4 after 500ms, disconnecting. Oct 5 17:42:49 taoseeker kernel: [ 1449.501356] cfg80211: All devices are disconnected, going to restore regulatory settings Oct 5 17:42:49 taoseeker kernel: [ 1449.501369] cfg80211: Restoring regulatory settings Oct 5 17:42:49 taoseeker kernel: [ 1449.501383] cfg80211: Calling CRDA for country: NO Oct 5 17:42:49 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: completed -> disconnected Oct 5 17:42:49 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:42:50 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:42:50 taoseeker kernel: [ 1450.763195] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:42:50 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:42:50 taoseeker kernel: [ 1450.772423] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:42:50 taoseeker kernel: [ 1450.976093] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:42:51 taoseeker kernel: [ 1451.180072] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 17:42:51 taoseeker kernel: [ 1451.384061] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 17:42:51 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 17:42:51 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:42:52 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:42:52 taoseeker kernel: [ 1452.651161] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:42:52 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:42:52 taoseeker kernel: [ 1452.660409] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:42:52 taoseeker kernel: [ 1452.864047] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:42:52 taoseeker kernel: [ 1453.068043] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 17:42:52 taoseeker wpa_supplicant[1011]: wlan2: Trying to associate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:42:52 taoseeker kernel: [ 1453.076955] wlan2: authenticated Oct 5 17:42:52 taoseeker kernel: [ 1453.077546] wlan2: associating with AP with corrupt beacon Oct 5 17:42:52 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> associating Oct 5 17:42:52 taoseeker kernel: [ 1453.082179] wlan2: associate with 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:42:53 taoseeker kernel: [ 1453.284039] wlan2: associate with 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:42:53 taoseeker wpa_supplicant[1011]: wlan2: Associated with 50:67:f0:d3:ed:c4 Oct 5 17:42:53 taoseeker kernel: [ 1453.289393] wlan2: RX AssocResp from 50:67:f0:d3:ed:c4 (capab=0xc11 status=0 aid=1) Oct 5 17:42:53 taoseeker kernel: [ 1453.289894] wlan2: associated Oct 5 17:42:53 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associating -> associated Oct 5 17:42:54 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associated -> 4-way handshake Oct 5 17:42:54 taoseeker wpa_supplicant[1011]: wlan2: WPA: Key negotiation completed with 50:67:f0:d3:ed:c4 [PTK=CCMP GTK=CCMP] Oct 5 17:42:54 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-CONNECTED - Connection to 50:67:f0:d3:ed:c4 completed (reauth) [id=0 id_str=] Oct 5 17:42:54 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: 4-way handshake -> completed Oct 5 17:42:58 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-DISCONNECTED bssid=50:67:f0:d3:ed:c4 reason=4 Oct 5 17:42:58 taoseeker kernel: [ 1458.496000] ieee80211 phy0: >wlan2: No probe response from AP 50:67:f0:d3:ed:c4 after 500ms, disconnecting. Oct 5 17:42:58 taoseeker kernel: [ 1458.497241] cfg80211: All devices are disconnected, going to restore regulatory settings Oct 5 17:42:58 taoseeker kernel: [ 1458.497255] cfg80211: Restoring regulatory settings Oct 5 17:42:58 taoseeker kernel: [ 1458.497267] cfg80211: Calling CRDA to update world regulatory domain Oct 5 17:42:58 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: completed -> disconnected Oct 5 17:42:58 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:42:59 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:42:59 taoseeker kernel: [ 1459.758851] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:42:59 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:42:59 taoseeker kernel: [ 1459.768329] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:42:59 taoseeker kernel: [ 1459.770871] wlan2: authenticated Oct 5 17:42:59 taoseeker wpa_supplicant[1011]: wlan2: Trying to associate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:42:59 taoseeker kernel: [ 1459.774517] wlan2: associating with AP with corrupt beacon Oct 5 17:42:59 taoseeker kernel: [ 1459.776377] wlan2: associate with 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:42:59 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> associating Oct 5 17:42:59 taoseeker kernel: [ 1459.780401] wlan2: RX AssocResp from 50:67:f0:d3:ed:c4 (capab=0xc11 status=0 aid=1) Oct 5 17:42:59 taoseeker kernel: [ 1459.780891] wlan2: associated Oct 5 17:42:59 taoseeker kernel: [ 1459.781538] cfg80211: Pending regulatory request, waiting for it to be processed... Oct 5 17:42:59 taoseeker wpa_supplicant[1011]: wlan2: Associated with 50:67:f0:d3:ed:c4 Oct 5 17:42:59 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associating -> associated Oct 5 17:43:00 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associated -> 4-way handshake Oct 5 17:43:00 taoseeker wpa_supplicant[1011]: wlan2: WPA: Key negotiation completed with 50:67:f0:d3:ed:c4 [PTK=CCMP GTK=CCMP] Oct 5 17:43:00 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-CONNECTED - Connection to 50:67:f0:d3:ed:c4 completed (reauth) [id=0 id_str=] Oct 5 17:43:00 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: 4-way handshake -> completed Oct 5 17:43:46 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-DISCONNECTED bssid=50:67:f0:d3:ed:c4 reason=4 Oct 5 17:43:46 taoseeker kernel: [ 1506.499358] ieee80211 phy0: >wlan2: No probe response from AP 50:67:f0:d3:ed:c4 after 500ms, disconnecting. Oct 5 17:43:46 taoseeker kernel: [ 1506.500628] cfg80211: All devices are disconnected, going to restore regulatory settings Oct 5 17:43:46 taoseeker kernel: [ 1506.500641] cfg80211: Restoring regulatory settings Oct 5 17:43:46 taoseeker kernel: [ 1506.500653] cfg80211: Calling CRDA to update world regulatory domain Oct 5 17:43:46 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: completed -> disconnected Oct 5 17:43:46 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:43:47 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:43:47 taoseeker kernel: [ 1507.768478] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:43:47 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:43:47 taoseeker kernel: [ 1507.779679] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:43:47 taoseeker kernel: [ 1507.983310] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:43:48 taoseeker kernel: [ 1508.187307] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 17:43:48 taoseeker kernel: [ 1508.391297] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 17:43:48 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 17:43:48 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:43:49 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:43:49 taoseeker kernel: [ 1509.659014] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:43:49 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:43:49 taoseeker kernel: [ 1509.667643] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:43:49 taoseeker kernel: [ 1509.671000] wlan2: authenticated Oct 5 17:43:49 taoseeker wpa_supplicant[1011]: wlan2: Trying to associate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:43:49 taoseeker kernel: [ 1509.673483] wlan2: associating with AP with corrupt beacon Oct 5 17:43:49 taoseeker kernel: [ 1509.675327] wlan2: associate with 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:43:49 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> associating Oct 5 17:43:49 taoseeker kernel: [ 1509.879282] wlan2: associate with 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:43:49 taoseeker kernel: [ 1510.083310] wlan2: associate with 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 17:43:49 taoseeker kernel: [ 1510.087187] wlan2: RX AssocResp from 50:67:f0:d3:ed:c4 (capab=0xc11 status=0 aid=1) Oct 5 17:43:49 taoseeker kernel: [ 1510.087686] wlan2: associated Oct 5 17:43:49 taoseeker wpa_supplicant[1011]: wlan2: Associated with 50:67:f0:d3:ed:c4 Oct 5 17:43:49 taoseeker kernel: [ 1510.088812] cfg80211: Pending regulatory request, waiting for it to be processed... Oct 5 17:43:49 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associating -> associated Oct 5 17:43:50 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associated -> 4-way handshake Oct 5 17:43:50 taoseeker wpa_supplicant[1011]: wlan2: WPA: Key negotiation completed with 50:67:f0:d3:ed:c4 [PTK=CCMP GTK=CCMP] Oct 5 17:43:50 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-CONNECTED - Connection to 50:67:f0:d3:ed:c4 completed (reauth) [id=0 id_str=] Oct 5 17:43:50 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: 4-way handshake -> completed Oct 5 17:44:05 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-DISCONNECTED bssid=50:67:f0:d3:ed:c4 reason=4 Oct 5 17:44:05 taoseeker kernel: [ 1525.495090] ieee80211 phy0: >wlan2: No probe response from AP 50:67:f0:d3:ed:c4 after 500ms, disconnecting. Oct 5 17:44:05 taoseeker kernel: [ 1525.497659] cfg80211: All devices are disconnected, going to restore regulatory settings Oct 5 17:44:05 taoseeker kernel: [ 1525.497676] cfg80211: Restoring regulatory settings Oct 5 17:44:05 taoseeker kernel: [ 1525.498564] cfg80211: Calling CRDA for country: NO Oct 5 17:44:05 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: completed -> disconnected Oct 5 17:44:05 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:44:06 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:44:06 taoseeker kernel: [ 1526.753844] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:44:06 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:44:06 taoseeker kernel: [ 1526.763417] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:44:06 taoseeker kernel: [ 1526.967055] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:44:06 taoseeker NetworkManager[800]: (wlan2): roamed from BSSID 50:67:F0:D3:ED:C4 (Telenor6904ett) to (none) ((none)) Oct 5 17:44:07 taoseeker kernel: [ 1527.171056] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 17:44:07 taoseeker kernel: [ 1527.375040] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 17:44:07 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 17:44:07 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:44:08 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:44:08 taoseeker kernel: [ 1528.635084] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:44:08 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:44:08 taoseeker kernel: [ 1528.643399] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:44:08 taoseeker wpa_supplicant[1011]: wlan2: Trying to associate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:44:08 taoseeker kernel: [ 1528.847032] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:44:08 taoseeker kernel: [ 1528.848544] wlan2: authenticated Oct 5 17:44:08 taoseeker kernel: [ 1528.849923] wlan2: associating with AP with corrupt beacon Oct 5 17:44:08 taoseeker kernel: [ 1528.851058] wlan2: associate with 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:44:08 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> associating Oct 5 17:44:08 taoseeker kernel: [ 1529.055022] wlan2: associate with 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:44:08 taoseeker kernel: [ 1529.061953] wlan2: RX AssocResp from 50:67:f0:d3:ed:c4 (capab=0xc11 status=0 aid=1) Oct 5 17:44:08 taoseeker kernel: [ 1529.062445] wlan2: associated Oct 5 17:44:08 taoseeker wpa_supplicant[1011]: wlan2: Associated with 50:67:f0:d3:ed:c4 Oct 5 17:44:08 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associating -> associated Oct 5 17:44:09 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associated -> 4-way handshake Oct 5 17:44:10 taoseeker wpa_supplicant[1011]: wlan2: WPA: Key negotiation completed with 50:67:f0:d3:ed:c4 [PTK=CCMP GTK=CCMP] Oct 5 17:44:10 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-CONNECTED - Connection to 50:67:f0:d3:ed:c4 completed (reauth) [id=0 id_str=] Oct 5 17:44:10 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: 4-way handshake -> completed Oct 5 17:44:12 taoseeker NetworkManager[800]: (wlan2): roamed from BSSID (none) ((none)) to 50:67:F0:D3:ED:C4 (Telenor6904ett) Oct 5 17:44:13 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-DISCONNECTED bssid=50:67:f0:d3:ed:c4 reason=15 Oct 5 17:44:13 taoseeker kernel: [ 1533.372724] wlan2: deauthenticated from 50:67:f0:d3:ed:c4 (Reason: 15) Oct 5 17:44:13 taoseeker kernel: [ 1533.374774] cfg80211: All devices are disconnected, going to restore regulatory settings Oct 5 17:44:13 taoseeker kernel: [ 1533.374790] cfg80211: Restoring regulatory settings Oct 5 17:44:13 taoseeker kernel: [ 1533.374802] cfg80211: Calling CRDA to update world regulatory domain Oct 5 17:44:13 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: completed -> disconnected Oct 5 17:44:13 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:44:14 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:44:14 taoseeker kernel: [ 1534.636153] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:44:14 taoseeker kernel: [ 1534.647290] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:44:14 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:44:14 taoseeker wpa_supplicant[1011]: wlan2: Trying to associate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:44:14 taoseeker kernel: [ 1534.850951] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:44:14 taoseeker kernel: [ 1534.854173] wlan2: authenticated Oct 5 17:44:14 taoseeker kernel: [ 1534.855739] wlan2: associating with AP with corrupt beacon Oct 5 17:44:14 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> associating Oct 5 17:44:14 taoseeker kernel: [ 1534.859166] wlan2: associate with 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:44:14 taoseeker kernel: [ 1535.062942] wlan2: associate with 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:44:15 taoseeker kernel: [ 1535.266943] wlan2: associate with 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 17:44:15 taoseeker kernel: [ 1535.273850] wlan2: RX AssocResp from 50:67:f0:d3:ed:c4 (capab=0xc11 status=0 aid=1) Oct 5 17:44:15 taoseeker kernel: [ 1535.274359] wlan2: associated Oct 5 17:44:15 taoseeker kernel: [ 1535.275053] cfg80211: Pending regulatory request, waiting for it to be processed... Oct 5 17:44:15 taoseeker wpa_supplicant[1011]: wlan2: Associated with 50:67:f0:d3:ed:c4 Oct 5 17:44:15 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associating -> associated Oct 5 17:44:16 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associated -> 4-way handshake Oct 5 17:44:18 taoseeker wpa_supplicant[1011]: wlan2: WPA: Key negotiation completed with 50:67:f0:d3:ed:c4 [PTK=CCMP GTK=CCMP] Oct 5 17:44:18 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-CONNECTED - Connection to 50:67:f0:d3:ed:c4 completed (reauth) [id=0 id_str=] Oct 5 17:44:18 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: 4-way handshake -> completed Oct 5 17:44:30 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-DISCONNECTED bssid=50:67:f0:d3:ed:c4 reason=4 Oct 5 17:44:30 taoseeker kernel: [ 1550.494753] ieee80211 phy0: >wlan2: No probe response from AP 50:67:f0:d3:ed:c4 after 500ms, disconnecting. Oct 5 17:44:30 taoseeker kernel: [ 1550.496797] cfg80211: All devices are disconnected, going to restore regulatory settings Oct 5 17:44:30 taoseeker kernel: [ 1550.496813] cfg80211: Restoring regulatory settings Oct 5 17:44:30 taoseeker kernel: [ 1550.496828] cfg80211: Calling CRDA for country: NO Oct 5 17:44:30 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: completed -> disconnected Oct 5 17:44:30 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:44:31 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:44:31 taoseeker kernel: [ 1551.753632] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:44:31 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:44:31 taoseeker kernel: [ 1551.763089] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:44:31 taoseeker kernel: [ 1551.966721] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:44:31 taoseeker wpa_supplicant[1011]: wlan2: Trying to associate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:44:31 taoseeker kernel: [ 1551.971147] wlan2: authenticated Oct 5 17:44:31 taoseeker kernel: [ 1551.972290] wlan2: associating with AP with corrupt beacon Oct 5 17:44:31 taoseeker kernel: [ 1551.974749] wlan2: associate with 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:44:31 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> associating Oct 5 17:44:32 taoseeker kernel: [ 1552.178718] wlan2: associate with 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:44:32 taoseeker kernel: [ 1552.382709] wlan2: associate with 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 17:44:32 taoseeker kernel: [ 1552.586703] wlan2: association with 50:67:f0:d3:ed:c4 timed out Oct 5 17:44:32 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associating -> disconnected Oct 5 17:44:32 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:44:33 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:44:33 taoseeker kernel: [ 1553.845825] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:44:33 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:44:33 taoseeker kernel: [ 1553.855052] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:44:33 taoseeker kernel: [ 1554.058687] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:44:34 taoseeker kernel: [ 1554.262689] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 17:44:34 taoseeker kernel: [ 1554.466676] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 17:44:34 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 17:44:34 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:44:35 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:44:35 taoseeker kernel: [ 1555.726311] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:44:35 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:44:35 taoseeker kernel: [ 1555.735022] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:44:35 taoseeker kernel: [ 1555.938674] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:44:36 taoseeker kernel: [ 1556.142672] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 17:44:36 taoseeker kernel: [ 1556.346656] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 17:44:36 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 17:44:36 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:44:37 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:44:37 taoseeker kernel: [ 1557.605710] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:44:37 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:44:37 taoseeker kernel: [ 1557.615010] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:44:37 taoseeker wpa_supplicant[1011]: wlan2: Trying to associate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:44:37 taoseeker kernel: [ 1557.818642] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:44:37 taoseeker kernel: [ 1557.820919] wlan2: authenticated Oct 5 17:44:37 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> associating Oct 5 17:44:37 taoseeker kernel: [ 1557.826686] wlan2: associating with AP with corrupt beacon Oct 5 17:44:37 taoseeker kernel: [ 1557.830689] wlan2: associate with 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:44:37 taoseeker kernel: [ 1558.034632] wlan2: associate with 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:44:38 taoseeker kernel: [ 1558.238639] wlan2: associate with 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 17:44:38 taoseeker kernel: [ 1558.442630] wlan2: association with 50:67:f0:d3:ed:c4 timed out Oct 5 17:44:38 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associating -> disconnected Oct 5 17:44:38 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:44:39 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:44:39 taoseeker kernel: [ 1559.701750] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:44:39 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:44:39 taoseeker kernel: [ 1559.710966] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:44:39 taoseeker kernel: [ 1559.914615] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:44:40 taoseeker kernel: [ 1560.118612] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 17:44:40 taoseeker kernel: [ 1560.322601] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 17:44:40 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 17:44:40 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:44:45 taoseeker NetworkManager[800]: (wlan2): link timed out. Oct 5 17:44:45 taoseeker NetworkManager[800]: (wlan2): device state change: activated -> failed (reason 'supplicant-timeout') [100 120 11] Oct 5 17:44:45 taoseeker NetworkManager[800]: Activation (wlan2) failed for connection 'Telenor6904ett' Oct 5 17:44:45 taoseeker NetworkManager[800]: (wlan2): device state change: failed -> disconnected (reason 'none') [120 30 0] Oct 5 17:44:45 taoseeker NetworkManager[800]: (wlan2): deactivating device (reason 'none') [0] Oct 5 17:44:45 taoseeker NetworkManager[800]: (wlan2): canceled DHCP transaction, DHCP client pid 1212 Oct 5 17:44:45 taoseeker kernel: [ 1566.078382] IPv6: ADDRCONF(NETDEV_UP): wlan2: link is not ready Oct 5 17:44:45 taoseeker NetworkManager[800]: DNS: plugin dnsmasq update failed Oct 5 17:44:46 taoseeker NetworkManager[800]: ((null)): removing resolv.conf from /sbin/resolvconf Oct 5 17:44:46 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> disconnected Oct 5 17:44:48 taoseeker NetworkManager[800]: Auto-activating connection 'Telenor6904ett'. Oct 5 17:44:48 taoseeker NetworkManager[800]: Activation (wlan2) starting connection 'Telenor6904ett' Oct 5 17:44:48 taoseeker NetworkManager[800]: (wlan2): device state change: disconnected -> prepare (reason 'none') [30 40 0] Oct 5 17:44:48 taoseeker NetworkManager[800]: Activation (wlan2) Stage 1 of 5 (Device Prepare) scheduled... Oct 5 17:44:48 taoseeker NetworkManager[800]: Activation (wlan2) Stage 1 of 5 (Device Prepare) started... Oct 5 17:44:48 taoseeker NetworkManager[800]: Activation (wlan2) Stage 2 of 5 (Device Configure) scheduled... Oct 5 17:44:48 taoseeker NetworkManager[800]: Activation (wlan2) Stage 1 of 5 (Device Prepare) complete. Oct 5 17:44:48 taoseeker NetworkManager[800]: Activation (wlan2) Stage 2 of 5 (Device Configure) starting... Oct 5 17:44:48 taoseeker NetworkManager[800]: (wlan2): device state change: prepare -> config (reason 'none') [40 50 0] Oct 5 17:44:48 taoseeker NetworkManager[800]: Activation (wlan2/wireless): access point 'Telenor6904ett' has security, but secrets are required. Oct 5 17:44:48 taoseeker NetworkManager[800]: (wlan2): device state change: config -> need-auth (reason 'none') [50 60 0] Oct 5 17:44:48 taoseeker NetworkManager[800]: Activation (wlan2) Stage 2 of 5 (Device Configure) complete. Oct 5 17:44:48 taoseeker NetworkManager[800]: Activation (wlan2) Stage 1 of 5 (Device Prepare) scheduled... Oct 5 17:44:48 taoseeker NetworkManager[800]: Activation (wlan2) Stage 1 of 5 (Device Prepare) started... Oct 5 17:44:48 taoseeker NetworkManager[800]: (wlan2): device state change: need-auth -> prepare (reason 'none') [60 40 0] Oct 5 17:44:48 taoseeker NetworkManager[800]: Activation (wlan2) Stage 2 of 5 (Device Configure) scheduled... Oct 5 17:44:48 taoseeker NetworkManager[800]: Activation (wlan2) Stage 1 of 5 (Device Prepare) complete. Oct 5 17:44:48 taoseeker NetworkManager[800]: Activation (wlan2) Stage 2 of 5 (Device Configure) starting... Oct 5 17:44:48 taoseeker NetworkManager[800]: (wlan2): device state change: prepare -> config (reason 'none') [40 50 0] Oct 5 17:44:48 taoseeker NetworkManager[800]: Activation (wlan2/wireless): connection 'Telenor6904ett' has security, and secrets exist. No new secrets needed. Oct 5 17:44:48 taoseeker NetworkManager[800]: Config: added 'ssid' value 'Telenor6904ett' Oct 5 17:44:48 taoseeker NetworkManager[800]: Config: added 'scan_ssid' value '1' Oct 5 17:44:48 taoseeker NetworkManager[800]: Config: added 'key_mgmt' value 'WPA-PSK' Oct 5 17:44:48 taoseeker NetworkManager[800]: Config: added 'auth_alg' value 'OPEN' Oct 5 17:44:48 taoseeker NetworkManager[800]: Config: added 'psk' value '' Oct 5 17:44:48 taoseeker NetworkManager[800]: Activation (wlan2) Stage 2 of 5 (Device Configure) complete. Oct 5 17:44:48 taoseeker NetworkManager[800]: Config: set interface ap_scan to 1 Oct 5 17:44:49 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:44:50 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:44:50 taoseeker kernel: [ 1570.283702] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:44:50 taoseeker kernel: [ 1570.294846] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:44:50 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:44:50 taoseeker kernel: [ 1570.498503] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:44:50 taoseeker kernel: [ 1570.702475] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 17:44:50 taoseeker kernel: [ 1570.906468] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 17:44:50 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 17:44:50 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:44:52 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:44:52 taoseeker kernel: [ 1572.163661] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:44:52 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:44:52 taoseeker kernel: [ 1572.174819] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:44:52 taoseeker kernel: [ 1572.378454] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:44:52 taoseeker kernel: [ 1572.582451] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 17:44:52 taoseeker kernel: [ 1572.786444] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 17:44:52 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 17:44:52 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:44:53 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:44:53 taoseeker kernel: [ 1574.043738] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:44:53 taoseeker kernel: [ 1574.054792] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:44:53 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:44:54 taoseeker kernel: [ 1574.258434] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:44:54 taoseeker kernel: [ 1574.462427] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 17:44:54 taoseeker kernel: [ 1574.666421] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 17:44:54 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 17:44:54 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:44:55 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:44:55 taoseeker kernel: [ 1575.931630] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:44:55 taoseeker kernel: [ 1575.942782] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:44:55 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:44:56 taoseeker kernel: [ 1576.146400] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:44:56 taoseeker kernel: [ 1576.350398] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 17:44:56 taoseeker kernel: [ 1576.554391] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 17:44:56 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 17:44:56 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:44:57 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:44:57 taoseeker kernel: [ 1577.811608] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:44:57 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:44:57 taoseeker kernel: [ 1577.822735] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:44:57 taoseeker wpa_supplicant[1011]: wlan2: Trying to associate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:44:57 taoseeker kernel: [ 1578.026379] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:44:57 taoseeker kernel: [ 1578.028876] wlan2: authenticated Oct 5 17:44:57 taoseeker kernel: [ 1578.029499] wlan2: associating with AP with corrupt beacon Oct 5 17:44:57 taoseeker kernel: [ 1578.030416] wlan2: associate with 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:44:57 taoseeker kernel: [ 1578.032940] wlan2: RX AssocResp from 50:67:f0:d3:ed:c4 (capab=0xc11 status=0 aid=1) Oct 5 17:44:57 taoseeker kernel: [ 1578.033428] wlan2: associated Oct 5 17:44:57 taoseeker kernel: [ 1578.033995] IPv6: ADDRCONF(NETDEV_CHANGE): wlan2: link becomes ready Oct 5 17:44:57 taoseeker wpa_supplicant[1011]: wlan2: Associated with 50:67:f0:d3:ed:c4 Oct 5 17:44:57 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> associating Oct 5 17:44:57 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associating -> associated Oct 5 17:44:58 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associated -> 4-way handshake Oct 5 17:44:58 taoseeker wpa_supplicant[1011]: wlan2: WPA: Key negotiation completed with 50:67:f0:d3:ed:c4 [PTK=CCMP GTK=CCMP] Oct 5 17:44:58 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-CONNECTED - Connection to 50:67:f0:d3:ed:c4 completed (reauth) [id=0 id_str=] Oct 5 17:44:58 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: 4-way handshake -> completed Oct 5 17:44:58 taoseeker NetworkManager[800]: Activation (wlan2/wireless) Stage 2 of 5 (Device Configure) successful. Connected to wireless network 'Telenor6904ett'. Oct 5 17:44:58 taoseeker NetworkManager[800]: Activation (wlan2) Stage 3 of 5 (IP Configure Start) scheduled. Oct 5 17:44:58 taoseeker NetworkManager[800]: Activation (wlan2) Stage 3 of 5 (IP Configure Start) started... Oct 5 17:44:58 taoseeker NetworkManager[800]: (wlan2): device state change: config -> ip-config (reason 'none') [50 70 0] Oct 5 17:44:58 taoseeker NetworkManager[800]: Activation (wlan2) Beginning DHCPv4 transaction (timeout in 45 seconds) Oct 5 17:44:58 taoseeker NetworkManager[800]: dhclient started with pid 1588 Oct 5 17:44:58 taoseeker NetworkManager[800]: Activation (wlan2) Beginning IP6 addrconf. Oct 5 17:44:58 taoseeker NetworkManager[800]: Activation (wlan2) Stage 3 of 5 (IP Configure Start) complete. Oct 5 17:44:58 taoseeker dhclient: Internet Systems Consortium DHCP Client 4.2.4 Oct 5 17:44:58 taoseeker dhclient: Copyright 2004-2012 Internet Systems Consortium. Oct 5 17:44:58 taoseeker dhclient: All rights reserved. Oct 5 17:44:58 taoseeker dhclient: For info, please visit https://www.isc.org/software/dhcp/ Oct 5 17:44:58 taoseeker dhclient: Oct 5 17:44:58 taoseeker dhclient: Listening on LPF/wlan2/00:14:51:81:6a:17 Oct 5 17:44:58 taoseeker dhclient: Sending on LPF/wlan2/00:14:51:81:6a:17 Oct 5 17:44:58 taoseeker dhclient: Sending on Socket/fallback Oct 5 17:44:58 taoseeker dhclient: DHCPREQUEST of 10.0.0.66 on wlan2 to 255.255.255.255 port 67 Oct 5 17:44:58 taoseeker NetworkManager[800]: (wlan2): DHCPv4 state changed nbi -> preinit Oct 5 17:45:01 taoseeker dhclient: DHCPREQUEST of 10.0.0.66 on wlan2 to 255.255.255.255 port 67 Oct 5 17:45:04 taoseeker kernel: [ 1584.494321] ieee80211 phy0: >wlan2: No probe response from AP 50:67:f0:d3:ed:c4 after 500ms, disconnecting. Oct 5 17:45:04 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-DISCONNECTED bssid=50:67:f0:d3:ed:c4 reason=4 Oct 5 17:45:04 taoseeker kernel: [ 1584.504221] cfg80211: All devices are disconnected, going to restore regulatory settings Oct 5 17:45:04 taoseeker kernel: [ 1584.504239] cfg80211: Restoring regulatory settings Oct 5 17:45:04 taoseeker kernel: [ 1584.504252] cfg80211: Calling CRDA to update world regulatory domain Oct 5 17:45:04 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: completed -> disconnected Oct 5 17:45:04 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:45:05 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:45:05 taoseeker kernel: [ 1585.783578] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:45:05 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:45:05 taoseeker kernel: [ 1585.794647] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:45:05 taoseeker wpa_supplicant[1011]: wlan2: Trying to associate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:45:05 taoseeker kernel: [ 1585.998290] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:45:05 taoseeker kernel: [ 1586.000737] wlan2: authenticated Oct 5 17:45:05 taoseeker kernel: [ 1586.001331] wlan2: associating with AP with corrupt beacon Oct 5 17:45:05 taoseeker kernel: [ 1586.002311] wlan2: associate with 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:45:05 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> associating Oct 5 17:45:05 taoseeker kernel: [ 1586.008453] wlan2: RX AssocResp from 50:67:f0:d3:ed:c4 (capab=0xc11 status=0 aid=1) Oct 5 17:45:05 taoseeker wpa_supplicant[1011]: wlan2: Associated with 50:67:f0:d3:ed:c4 Oct 5 17:45:05 taoseeker kernel: [ 1586.014293] wlan2: associated Oct 5 17:45:05 taoseeker kernel: [ 1586.015188] cfg80211: Pending regulatory request, waiting for it to be processed... Oct 5 17:45:05 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associating -> associated Oct 5 17:45:06 taoseeker dhclient: DHCPREQUEST of 10.0.0.66 on wlan2 to 255.255.255.255 port 67 Oct 5 17:45:06 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associated -> 4-way handshake Oct 5 17:45:08 taoseeker wpa_supplicant[1011]: wlan2: WPA: Key negotiation completed with 50:67:f0:d3:ed:c4 [PTK=CCMP GTK=CCMP] Oct 5 17:45:08 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-CONNECTED - Connection to 50:67:f0:d3:ed:c4 completed (reauth) [id=0 id_str=] Oct 5 17:45:08 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: 4-way handshake -> completed Oct 5 17:45:14 taoseeker dhclient: DHCPDISCOVER on wlan2 to 255.255.255.255 port 67 interval 3 Oct 5 17:45:17 taoseeker dhclient: DHCPDISCOVER on wlan2 to 255.255.255.255 port 67 interval 8 Oct 5 17:45:17 taoseeker dhclient: DHCPREQUEST of 10.0.0.66 on wlan2 to 255.255.255.255 port 67 Oct 5 17:45:17 taoseeker dhclient: DHCPOFFER of 10.0.0.66 from 10.0.0.138 Oct 5 17:45:18 taoseeker NetworkManager[800]: (wlan2): IP6 addrconf timed out or failed. Oct 5 17:45:18 taoseeker NetworkManager[800]: Activation (wlan2) Stage 4 of 5 (IPv6 Configure Timeout) scheduled... Oct 5 17:45:18 taoseeker NetworkManager[800]: Activation (wlan2) Stage 4 of 5 (IPv6 Configure Timeout) started... Oct 5 17:45:18 taoseeker NetworkManager[800]: Activation (wlan2) Stage 4 of 5 (IPv6 Configure Timeout) complete. Oct 5 17:45:20 taoseeker dhclient: DHCPREQUEST of 10.0.0.66 on wlan2 to 255.255.255.255 port 67 Oct 5 17:45:20 taoseeker dhclient: DHCPACK of 10.0.0.66 from 10.0.0.138 Oct 5 17:45:20 taoseeker dhclient: bound to 10.0.0.66 -- renewal in 34928 seconds. Oct 5 17:45:20 taoseeker NetworkManager[800]: (wlan2): DHCPv4 state changed preinit -> bound Oct 5 17:45:20 taoseeker NetworkManager[800]: address 10.0.0.66 Oct 5 17:45:20 taoseeker NetworkManager[800]: prefix 24 (255.255.255.0) Oct 5 17:45:20 taoseeker NetworkManager[800]: gateway 10.0.0.138 Oct 5 17:45:20 taoseeker NetworkManager[800]: hostname 'taoseeker' Oct 5 17:45:20 taoseeker NetworkManager[800]: nameserver '130.67.15.198' Oct 5 17:45:20 taoseeker NetworkManager[800]: nameserver '193.213.112.4' Oct 5 17:45:20 taoseeker NetworkManager[800]: nameserver '10.0.0.138' Oct 5 17:45:20 taoseeker NetworkManager[800]: domain name 'lan' Oct 5 17:45:20 taoseeker NetworkManager[800]: Activation (wlan2) Stage 5 of 5 (IPv4 Configure Commit) scheduled... Oct 5 17:45:20 taoseeker NetworkManager[800]: Activation (wlan2) Stage 5 of 5 (IPv4 Commit) started... Oct 5 17:45:21 taoseeker NetworkManager[800]: (wlan2): device state change: ip-config -> activated (reason 'none') [70 100 0] Oct 5 17:45:21 taoseeker NetworkManager[800]: ((null)): writing resolv.conf to /sbin/resolvconf Oct 5 17:45:21 taoseeker NetworkManager[800]: Policy set 'Telenor6904ett' (wlan2) as default for IPv4 routing and DNS. Oct 5 17:45:21 taoseeker NetworkManager[800]: Activation (wlan2) successful, device activated. Oct 5 17:45:21 taoseeker NetworkManager[800]: Activation (wlan2) Stage 5 of 5 (IPv4 Commit) complete. Oct 5 17:45:32 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-DISCONNECTED bssid=50:67:f0:d3:ed:c4 reason=4 Oct 5 17:45:32 taoseeker kernel: [ 1612.493926] ieee80211 phy0: >wlan2: No probe response from AP 50:67:f0:d3:ed:c4 after 500ms, disconnecting. Oct 5 17:45:32 taoseeker kernel: [ 1612.497428] cfg80211: All devices are disconnected, going to restore regulatory settings Oct 5 17:45:32 taoseeker kernel: [ 1612.497449] cfg80211: Restoring regulatory settings Oct 5 17:45:32 taoseeker kernel: [ 1612.497463] cfg80211: Calling CRDA to update world regulatory domain Oct 5 17:45:32 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: completed -> disconnected Oct 5 17:45:32 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:45:33 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:45:33 taoseeker kernel: [ 1613.752717] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:45:33 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:45:33 taoseeker kernel: [ 1613.762295] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:45:33 taoseeker kernel: [ 1613.965903] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:45:34 taoseeker kernel: [ 1614.169892] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 17:45:34 taoseeker kernel: [ 1614.373885] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 17:45:34 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 17:45:34 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:45:35 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:45:35 taoseeker kernel: [ 1615.632939] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:45:35 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:45:35 taoseeker kernel: [ 1615.642222] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:45:35 taoseeker kernel: [ 1615.845873] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:45:35 taoseeker kernel: [ 1616.049865] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 17:45:36 taoseeker kernel: [ 1616.253868] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 17:45:36 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 17:45:36 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:45:37 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:45:37 taoseeker kernel: [ 1617.514723] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:45:37 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:45:37 taoseeker kernel: [ 1617.522221] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:45:37 taoseeker kernel: [ 1617.725850] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:45:37 taoseeker kernel: [ 1617.929834] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 17:45:38 taoseeker kernel: [ 1618.133838] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 17:45:38 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 17:45:38 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:45:39 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:45:39 taoseeker kernel: [ 1619.396131] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:45:39 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:45:39 taoseeker kernel: [ 1619.402201] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:45:39 taoseeker kernel: [ 1619.605818] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:45:39 taoseeker kernel: [ 1619.809812] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 17:45:39 taoseeker kernel: [ 1620.013806] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 17:45:39 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 17:45:40 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:45:41 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:45:41 taoseeker kernel: [ 1621.272697] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:45:41 taoseeker kernel: [ 1621.282164] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:45:41 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:45:41 taoseeker kernel: [ 1621.485798] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:45:41 taoseeker kernel: [ 1621.689786] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 17:45:41 taoseeker kernel: [ 1621.893888] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 17:45:41 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 17:45:41 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:45:43 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:45:43 taoseeker kernel: [ 1623.151008] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:45:43 taoseeker kernel: [ 1623.162139] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:45:43 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:45:43 taoseeker kernel: [ 1623.365772] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:45:43 taoseeker kernel: [ 1623.569761] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 17:45:43 taoseeker kernel: [ 1623.773754] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 17:45:43 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 17:45:43 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:45:44 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:45:44 taoseeker kernel: [ 1625.032671] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:45:44 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:45:44 taoseeker kernel: [ 1625.042109] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:45:45 taoseeker kernel: [ 1625.245874] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:45:45 taoseeker kernel: [ 1625.449740] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 17:45:45 taoseeker kernel: [ 1625.653729] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 17:45:45 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 17:45:45 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:45:46 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:45:46 taoseeker kernel: [ 1626.912661] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:45:46 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:45:46 taoseeker kernel: [ 1626.922081] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:45:46 taoseeker kernel: [ 1626.924611] wlan2: authenticated Oct 5 17:45:46 taoseeker wpa_supplicant[1011]: wlan2: Trying to associate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:45:46 taoseeker kernel: [ 1626.929787] wlan2: associate with 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:45:46 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> associating Oct 5 17:45:47 taoseeker kernel: [ 1627.133720] wlan2: associate with 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:45:47 taoseeker kernel: [ 1627.337712] wlan2: associate with 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 17:45:47 taoseeker kernel: [ 1627.541705] wlan2: association with 50:67:f0:d3:ed:c4 timed out Oct 5 17:45:47 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associating -> disconnected Oct 5 17:45:47 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:45:47 taoseeker NetworkManager[800]: (wlan2): link timed out. Oct 5 17:45:47 taoseeker NetworkManager[800]: (wlan2): device state change: activated -> failed (reason 'supplicant-timeout') [100 120 11] Oct 5 17:45:48 taoseeker NetworkManager[800]: Activation (wlan2) failed for connection 'Telenor6904ett' Oct 5 17:45:48 taoseeker NetworkManager[800]: (wlan2): device state change: failed -> disconnected (reason 'none') [120 30 0] Oct 5 17:45:48 taoseeker NetworkManager[800]: (wlan2): deactivating device (reason 'none') [0] Oct 5 17:45:48 taoseeker NetworkManager[800]: (wlan2): canceled DHCP transaction, DHCP client pid 1588 Oct 5 17:45:48 taoseeker kernel: [ 1628.147887] IPv6: ADDRCONF(NETDEV_UP): wlan2: link is not ready Oct 5 17:45:48 taoseeker NetworkManager[800]: DNS: plugin dnsmasq update failed Oct 5 17:45:48 taoseeker NetworkManager[800]: ((null)): removing resolv.conf from /sbin/resolvconf Oct 5 17:45:48 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> disconnected Oct 5 17:45:50 taoseeker NetworkManager[800]: Auto-activating connection 'Telenor6904ett'. Oct 5 17:45:50 taoseeker NetworkManager[800]: Activation (wlan2) starting connection 'Telenor6904ett' Oct 5 17:45:50 taoseeker NetworkManager[800]: (wlan2): device state change: disconnected -> prepare (reason 'none') [30 40 0] Oct 5 17:45:50 taoseeker NetworkManager[800]: Activation (wlan2) Stage 1 of 5 (Device Prepare) scheduled... Oct 5 17:45:50 taoseeker NetworkManager[800]: Activation (wlan2) Stage 1 of 5 (Device Prepare) started... Oct 5 17:45:50 taoseeker NetworkManager[800]: Activation (wlan2) Stage 2 of 5 (Device Configure) scheduled... Oct 5 17:45:50 taoseeker NetworkManager[800]: Activation (wlan2) Stage 1 of 5 (Device Prepare) complete. Oct 5 17:45:50 taoseeker NetworkManager[800]: Activation (wlan2) Stage 2 of 5 (Device Configure) starting... Oct 5 17:45:50 taoseeker NetworkManager[800]: (wlan2): device state change: prepare -> config (reason 'none') [40 50 0] Oct 5 17:45:50 taoseeker NetworkManager[800]: Activation (wlan2/wireless): access point 'Telenor6904ett' has security, but secrets are required. Oct 5 17:45:50 taoseeker NetworkManager[800]: (wlan2): device state change: config -> need-auth (reason 'none') [50 60 0] Oct 5 17:45:50 taoseeker NetworkManager[800]: Activation (wlan2) Stage 2 of 5 (Device Configure) complete. Oct 5 17:45:50 taoseeker NetworkManager[800]: Activation (wlan2) Stage 1 of 5 (Device Prepare) scheduled... Oct 5 17:45:50 taoseeker NetworkManager[800]: Activation (wlan2) Stage 1 of 5 (Device Prepare) started... Oct 5 17:45:50 taoseeker NetworkManager[800]: (wlan2): device state change: need-auth -> prepare (reason 'none') [60 40 0] Oct 5 17:45:50 taoseeker NetworkManager[800]: Activation (wlan2) Stage 2 of 5 (Device Configure) scheduled... Oct 5 17:45:50 taoseeker NetworkManager[800]: Activation (wlan2) Stage 1 of 5 (Device Prepare) complete. Oct 5 17:45:50 taoseeker NetworkManager[800]: Activation (wlan2) Stage 2 of 5 (Device Configure) starting... Oct 5 17:45:50 taoseeker NetworkManager[800]: (wlan2): device state change: prepare -> config (reason 'none') [40 50 0] Oct 5 17:45:50 taoseeker NetworkManager[800]: Activation (wlan2/wireless): connection 'Telenor6904ett' has security, and secrets exist. No new secrets needed. Oct 5 17:45:50 taoseeker NetworkManager[800]: Config: added 'ssid' value 'Telenor6904ett' Oct 5 17:45:50 taoseeker NetworkManager[800]: Config: added 'scan_ssid' value '1' Oct 5 17:45:50 taoseeker NetworkManager[800]: Config: added 'key_mgmt' value 'WPA-PSK' Oct 5 17:45:50 taoseeker NetworkManager[800]: Config: added 'auth_alg' value 'OPEN' Oct 5 17:45:50 taoseeker NetworkManager[800]: Config: added 'psk' value '' Oct 5 17:45:50 taoseeker NetworkManager[800]: Activation (wlan2) Stage 2 of 5 (Device Configure) complete. Oct 5 17:45:50 taoseeker NetworkManager[800]: Config: set interface ap_scan to 1 Oct 5 17:45:51 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:45:52 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:45:52 taoseeker kernel: [ 1632.254947] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:45:52 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:45:52 taoseeker kernel: [ 1632.266013] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:45:52 taoseeker kernel: [ 1632.469655] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:45:52 taoseeker kernel: [ 1632.673782] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 17:45:52 taoseeker kernel: [ 1632.877646] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 17:45:52 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 17:45:52 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:45:54 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:45:54 taoseeker kernel: [ 1634.134884] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:45:54 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:45:54 taoseeker kernel: [ 1634.146023] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:45:54 taoseeker kernel: [ 1634.349633] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:45:54 taoseeker kernel: [ 1634.553631] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 17:45:54 taoseeker kernel: [ 1634.757626] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 17:45:54 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 17:45:54 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:45:55 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:45:55 taoseeker kernel: [ 1636.014849] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:45:55 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:45:55 taoseeker kernel: [ 1636.025988] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:45:56 taoseeker kernel: [ 1636.229608] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:45:56 taoseeker kernel: [ 1636.433602] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 17:45:56 taoseeker kernel: [ 1636.637599] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 17:45:56 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 17:45:56 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:45:57 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:45:57 taoseeker kernel: [ 1637.894841] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:45:57 taoseeker kernel: [ 1637.905955] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:45:57 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:45:58 taoseeker kernel: [ 1638.109583] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:45:58 taoseeker kernel: [ 1638.313583] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 17:45:58 taoseeker kernel: [ 1638.517576] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 17:45:58 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 17:45:58 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:45:59 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:45:59 taoseeker kernel: [ 1639.774779] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:45:59 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:45:59 taoseeker kernel: [ 1639.785936] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:45:59 taoseeker kernel: [ 1639.989564] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:45:59 taoseeker kernel: [ 1639.993713] wlan2: authenticated Oct 5 17:45:59 taoseeker wpa_supplicant[1011]: wlan2: Trying to associate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:45:59 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> associating Oct 5 17:45:59 taoseeker kernel: [ 1640.001617] wlan2: associating with AP with corrupt beacon Oct 5 17:45:59 taoseeker kernel: [ 1640.005602] wlan2: associate with 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:45:59 taoseeker kernel: [ 1640.008137] wlan2: RX AssocResp from 50:67:f0:d3:ed:c4 (capab=0xc11 status=0 aid=1) Oct 5 17:45:59 taoseeker wpa_supplicant[1011]: wlan2: Associated with 50:67:f0:d3:ed:c4 Oct 5 17:45:59 taoseeker kernel: [ 1640.014033] wlan2: associated Oct 5 17:45:59 taoseeker kernel: [ 1640.014559] IPv6: ADDRCONF(NETDEV_CHANGE): wlan2: link becomes ready Oct 5 17:45:59 taoseeker kernel: [ 1640.016420] cfg80211: Pending regulatory request, waiting for it to be processed... Oct 5 17:45:59 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associating -> associated Oct 5 17:46:00 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associated -> 4-way handshake Oct 5 17:46:00 taoseeker wpa_supplicant[1011]: wlan2: WPA: Key negotiation completed with 50:67:f0:d3:ed:c4 [PTK=CCMP GTK=CCMP] Oct 5 17:46:00 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-CONNECTED - Connection to 50:67:f0:d3:ed:c4 completed (reauth) [id=0 id_str=] Oct 5 17:46:00 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: 4-way handshake -> completed Oct 5 17:46:00 taoseeker NetworkManager[800]: Activation (wlan2/wireless) Stage 2 of 5 (Device Configure) successful. Connected to wireless network 'Telenor6904ett'. Oct 5 17:46:00 taoseeker NetworkManager[800]: Activation (wlan2) Stage 3 of 5 (IP Configure Start) scheduled. Oct 5 17:46:00 taoseeker NetworkManager[800]: Activation (wlan2) Stage 3 of 5 (IP Configure Start) started... Oct 5 17:46:00 taoseeker NetworkManager[800]: (wlan2): device state change: config -> ip-config (reason 'none') [50 70 0] Oct 5 17:46:00 taoseeker NetworkManager[800]: Activation (wlan2) Beginning DHCPv4 transaction (timeout in 45 seconds) Oct 5 17:46:00 taoseeker NetworkManager[800]: dhclient started with pid 1715 Oct 5 17:46:00 taoseeker NetworkManager[800]: Activation (wlan2) Beginning IP6 addrconf. Oct 5 17:46:00 taoseeker NetworkManager[800]: Activation (wlan2) Stage 3 of 5 (IP Configure Start) complete. Oct 5 17:46:00 taoseeker dhclient: Internet Systems Consortium DHCP Client 4.2.4 Oct 5 17:46:00 taoseeker dhclient: Copyright 2004-2012 Internet Systems Consortium. Oct 5 17:46:00 taoseeker dhclient: All rights reserved. Oct 5 17:46:00 taoseeker dhclient: For info, please visit https://www.isc.org/software/dhcp/ Oct 5 17:46:00 taoseeker dhclient: Oct 5 17:46:00 taoseeker dhclient: Listening on LPF/wlan2/00:14:51:81:6a:17 Oct 5 17:46:00 taoseeker dhclient: Sending on LPF/wlan2/00:14:51:81:6a:17 Oct 5 17:46:00 taoseeker NetworkManager[800]: (wlan2): DHCPv4 state changed nbi -> preinit Oct 5 17:46:00 taoseeker dhclient: Sending on Socket/fallback Oct 5 17:46:00 taoseeker dhclient: DHCPREQUEST of 10.0.0.66 on wlan2 to 255.255.255.255 port 67 Oct 5 17:46:00 taoseeker dhclient: DHCPACK of 10.0.0.66 from 10.0.0.138 Oct 5 17:46:00 taoseeker dhclient: bound to 10.0.0.66 -- renewal in 36471 seconds. Oct 5 17:46:00 taoseeker NetworkManager[800]: (wlan2): DHCPv4 state changed preinit -> reboot Oct 5 17:46:00 taoseeker NetworkManager[800]: address 10.0.0.66 Oct 5 17:46:00 taoseeker NetworkManager[800]: prefix 24 (255.255.255.0) Oct 5 17:46:00 taoseeker NetworkManager[800]: gateway 10.0.0.138 Oct 5 17:46:00 taoseeker NetworkManager[800]: hostname 'taoseeker' Oct 5 17:46:00 taoseeker NetworkManager[800]: nameserver '130.67.15.198' Oct 5 17:46:00 taoseeker NetworkManager[800]: nameserver '193.213.112.4' Oct 5 17:46:00 taoseeker NetworkManager[800]: nameserver '10.0.0.138' Oct 5 17:46:00 taoseeker NetworkManager[800]: domain name 'lan' Oct 5 17:46:00 taoseeker NetworkManager[800]: Activation (wlan2) Stage 5 of 5 (IPv4 Configure Commit) scheduled... Oct 5 17:46:00 taoseeker NetworkManager[800]: Activation (wlan2) Stage 5 of 5 (IPv4 Commit) started... Oct 5 17:46:01 taoseeker NetworkManager[800]: (wlan2): device state change: ip-config -> activated (reason 'none') [70 100 0] Oct 5 17:46:01 taoseeker NetworkManager[800]: ((null)): writing resolv.conf to /sbin/resolvconf Oct 5 17:46:01 taoseeker NetworkManager[800]: Policy set 'Telenor6904ett' (wlan2) as default for IPv4 routing and DNS. Oct 5 17:46:01 taoseeker NetworkManager[800]: Activation (wlan2) successful, device activated. Oct 5 17:46:01 taoseeker NetworkManager[800]: Activation (wlan2) Stage 5 of 5 (IPv4 Commit) complete. Oct 5 17:46:05 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-DISCONNECTED bssid=50:67:f0:d3:ed:c4 reason=4 Oct 5 17:46:05 taoseeker kernel: [ 1645.493492] ieee80211 phy0: >wlan2: No probe response from AP 50:67:f0:d3:ed:c4 after 500ms, disconnecting. Oct 5 17:46:05 taoseeker kernel: [ 1645.495974] cfg80211: All devices are disconnected, going to restore regulatory settings Oct 5 17:46:05 taoseeker kernel: [ 1645.495991] cfg80211: Restoring regulatory settings Oct 5 17:46:05 taoseeker kernel: [ 1645.496012] cfg80211: Calling CRDA for country: NO Oct 5 17:46:05 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: completed -> disconnected Oct 5 17:46:05 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:46:06 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:46:06 taoseeker kernel: [ 1646.768272] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:46:06 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:46:06 taoseeker kernel: [ 1646.777824] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:46:06 taoseeker kernel: [ 1646.981467] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:46:07 taoseeker kernel: [ 1647.185463] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 17:46:07 taoseeker kernel: [ 1647.389454] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 17:46:07 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 17:46:07 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:46:08 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:46:08 taoseeker kernel: [ 1648.648253] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:46:08 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:46:08 taoseeker kernel: [ 1648.657780] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:46:08 taoseeker kernel: [ 1648.861440] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:46:08 taoseeker kernel: [ 1649.065440] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 17:46:09 taoseeker kernel: [ 1649.269432] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 17:46:09 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 17:46:09 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:46:10 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:46:10 taoseeker kernel: [ 1650.528483] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:46:10 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:46:10 taoseeker kernel: [ 1650.537765] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:46:10 taoseeker kernel: [ 1650.741418] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:46:10 taoseeker wpa_supplicant[1011]: wlan2: Trying to associate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:46:10 taoseeker kernel: [ 1650.945407] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 17:46:10 taoseeker kernel: [ 1650.948728] wlan2: authenticated Oct 5 17:46:10 taoseeker kernel: [ 1650.949279] wlan2: associating with AP with corrupt beacon Oct 5 17:46:10 taoseeker kernel: [ 1650.950057] wlan2: associate with 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:46:10 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> associating Oct 5 17:46:10 taoseeker wpa_supplicant[1011]: wlan2: Associated with 50:67:f0:d3:ed:c4 Oct 5 17:46:10 taoseeker kernel: [ 1650.966358] wlan2: RX AssocResp from 50:67:f0:d3:ed:c4 (capab=0xc11 status=0 aid=1) Oct 5 17:46:10 taoseeker kernel: [ 1650.966871] wlan2: associated Oct 5 17:46:10 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associating -> associated Oct 5 17:46:11 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associated -> 4-way handshake Oct 5 17:46:17 taoseeker kernel: [ 1657.352585] wlan2: deauthenticated from 50:67:f0:d3:ed:c4 (Reason: 15) Oct 5 17:46:17 taoseeker wpa_supplicant[1011]: wlan2: WPA: 4-Way Handshake failed - pre-shared key may be incorrect Oct 5 17:46:17 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-DISCONNECTED bssid=50:67:f0:d3:ed:c4 reason=15 Oct 5 17:46:17 taoseeker kernel: [ 1657.354545] cfg80211: All devices are disconnected, going to restore regulatory settings Oct 5 17:46:17 taoseeker kernel: [ 1657.354560] cfg80211: Restoring regulatory settings Oct 5 17:46:17 taoseeker kernel: [ 1657.354572] cfg80211: Calling CRDA to update world regulatory domain Oct 5 17:46:17 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: 4-way handshake -> disconnected Oct 5 17:46:17 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:46:18 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:46:18 taoseeker kernel: [ 1658.612156] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:46:18 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:46:18 taoseeker kernel: [ 1658.621679] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:46:18 taoseeker kernel: [ 1658.825318] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:46:18 taoseeker kernel: [ 1659.029311] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 17:46:19 taoseeker kernel: [ 1659.233304] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 17:46:19 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 17:46:19 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:46:20 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:46:20 taoseeker kernel: [ 1660.492301] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:46:20 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:46:20 taoseeker kernel: [ 1660.501632] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:46:20 taoseeker kernel: [ 1660.705295] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:46:20 taoseeker kernel: [ 1660.909281] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 17:46:20 taoseeker NetworkManager[800]: (wlan2): IP6 addrconf timed out or failed. Oct 5 17:46:20 taoseeker NetworkManager[800]: Activation (wlan2) Stage 4 of 5 (IPv6 Configure Timeout) scheduled... Oct 5 17:46:20 taoseeker NetworkManager[800]: (wlan2): link timed out. Oct 5 17:46:20 taoseeker NetworkManager[800]: (wlan2): device state change: activated -> failed (reason 'supplicant-timeout') [100 120 11] Oct 5 17:46:21 taoseeker kernel: [ 1661.113288] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 17:46:21 taoseeker NetworkManager[800]: Activation (wlan2) failed for connection 'Telenor6904ett' Oct 5 17:46:21 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 17:46:21 taoseeker NetworkManager[800]: Activation (wlan2) Stage 4 of 5 (IPv6 Configure Timeout) started... Oct 5 17:46:21 taoseeker NetworkManager[800]: Activation (wlan2) Stage 4 of 5 (IPv6 Configure Timeout) complete. Oct 5 17:46:21 taoseeker NetworkManager[800]: (wlan2): device state change: failed -> disconnected (reason 'none') [120 30 0] Oct 5 17:46:21 taoseeker NetworkManager[800]: (wlan2): deactivating device (reason 'none') [0] Oct 5 17:46:21 taoseeker NetworkManager[800]: (wlan2): canceled DHCP transaction, DHCP client pid 1715 Oct 5 17:46:21 taoseeker kernel: [ 1661.160194] IPv6: ADDRCONF(NETDEV_UP): wlan2: link is not ready Oct 5 17:46:21 taoseeker NetworkManager[800]: DNS: plugin dnsmasq update failed Oct 5 17:46:21 taoseeker NetworkManager[800]: ((null)): removing resolv.conf from /sbin/resolvconf Oct 5 17:46:21 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> inactive Oct 5 17:46:23 taoseeker NetworkManager[800]: Auto-activating connection 'Telenor6904ett'. Oct 5 17:46:23 taoseeker NetworkManager[800]: Activation (wlan2) starting connection 'Telenor6904ett' Oct 5 17:46:23 taoseeker NetworkManager[800]: (wlan2): device state change: disconnected -> prepare (reason 'none') [30 40 0] Oct 5 17:46:23 taoseeker NetworkManager[800]: Activation (wlan2) Stage 1 of 5 (Device Prepare) scheduled... Oct 5 17:46:23 taoseeker NetworkManager[800]: Activation (wlan2) Stage 1 of 5 (Device Prepare) started... Oct 5 17:46:23 taoseeker NetworkManager[800]: Activation (wlan2) Stage 2 of 5 (Device Configure) scheduled... Oct 5 17:46:23 taoseeker NetworkManager[800]: Activation (wlan2) Stage 1 of 5 (Device Prepare) complete. Oct 5 17:46:23 taoseeker NetworkManager[800]: Activation (wlan2) Stage 2 of 5 (Device Configure) starting... Oct 5 17:46:23 taoseeker NetworkManager[800]: (wlan2): device state change: prepare -> config (reason 'none') [40 50 0] Oct 5 17:46:23 taoseeker NetworkManager[800]: Activation (wlan2/wireless): access point 'Telenor6904ett' has security, but secrets are required. Oct 5 17:46:23 taoseeker NetworkManager[800]: (wlan2): device state change: config -> need-auth (reason 'none') [50 60 0] Oct 5 17:46:23 taoseeker NetworkManager[800]: Activation (wlan2) Stage 2 of 5 (Device Configure) complete. Oct 5 17:46:23 taoseeker NetworkManager[800]: Activation (wlan2) Stage 1 of 5 (Device Prepare) scheduled... Oct 5 17:46:23 taoseeker NetworkManager[800]: Activation (wlan2) Stage 1 of 5 (Device Prepare) started... Oct 5 17:46:23 taoseeker NetworkManager[800]: (wlan2): device state change: need-auth -> prepare (reason 'none') [60 40 0] Oct 5 17:46:23 taoseeker NetworkManager[800]: Activation (wlan2) Stage 2 of 5 (Device Configure) scheduled... Oct 5 17:46:23 taoseeker NetworkManager[800]: Activation (wlan2) Stage 1 of 5 (Device Prepare) complete. Oct 5 17:46:23 taoseeker NetworkManager[800]: Activation (wlan2) Stage 2 of 5 (Device Configure) starting... Oct 5 17:46:23 taoseeker NetworkManager[800]: (wlan2): device state change: prepare -> config (reason 'none') [40 50 0] Oct 5 17:46:23 taoseeker NetworkManager[800]: Activation (wlan2/wireless): connection 'Telenor6904ett' has security, and secrets exist. No new secrets needed. Oct 5 17:46:23 taoseeker NetworkManager[800]: Config: added 'ssid' value 'Telenor6904ett' Oct 5 17:46:23 taoseeker NetworkManager[800]: Config: added 'scan_ssid' value '1' Oct 5 17:46:23 taoseeker NetworkManager[800]: Config: added 'key_mgmt' value 'WPA-PSK' Oct 5 17:46:23 taoseeker NetworkManager[800]: Config: added 'auth_alg' value 'OPEN' Oct 5 17:46:23 taoseeker NetworkManager[800]: Config: added 'psk' value '' Oct 5 17:46:23 taoseeker NetworkManager[800]: Activation (wlan2) Stage 2 of 5 (Device Configure) complete. Oct 5 17:46:23 taoseeker NetworkManager[800]: Config: set interface ap_scan to 1 Oct 5 17:46:24 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: inactive -> scanning Oct 5 17:46:25 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:46:25 taoseeker kernel: [ 1665.258507] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:46:25 taoseeker kernel: [ 1665.269597] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:46:25 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:46:25 taoseeker kernel: [ 1665.473231] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:46:25 taoseeker kernel: [ 1665.677228] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 17:46:25 taoseeker kernel: [ 1665.881225] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 17:46:25 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 17:46:25 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:46:27 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:46:27 taoseeker kernel: [ 1667.138431] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:46:27 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:46:27 taoseeker kernel: [ 1667.149583] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:46:27 taoseeker kernel: [ 1667.353207] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:46:27 taoseeker kernel: [ 1667.557205] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 17:46:27 taoseeker kernel: [ 1667.761202] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 17:46:27 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 17:46:27 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:46:28 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:46:28 taoseeker kernel: [ 1669.018416] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:46:28 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:46:28 taoseeker kernel: [ 1669.029535] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:46:29 taoseeker kernel: [ 1669.233185] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:46:29 taoseeker kernel: [ 1669.437185] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 17:46:29 taoseeker kernel: [ 1669.641173] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 17:46:29 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 17:46:29 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:46:30 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:46:30 taoseeker kernel: [ 1670.906393] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:46:30 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:46:30 taoseeker kernel: [ 1670.917525] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:46:31 taoseeker kernel: [ 1671.121159] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:46:31 taoseeker kernel: [ 1671.325156] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 17:46:31 taoseeker kernel: [ 1671.529150] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 17:46:31 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 17:46:31 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:46:32 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:46:32 taoseeker kernel: [ 1672.786387] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:46:32 taoseeker kernel: [ 1672.797511] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:46:32 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:46:32 taoseeker kernel: [ 1673.001138] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:46:33 taoseeker kernel: [ 1673.205136] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 17:46:33 taoseeker kernel: [ 1673.409130] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 17:46:33 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 17:46:33 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:46:34 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:46:34 taoseeker kernel: [ 1674.674360] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:46:34 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:46:34 taoseeker kernel: [ 1674.685478] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:46:34 taoseeker kernel: [ 1674.889112] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:46:34 taoseeker kernel: [ 1675.093110] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 17:46:35 taoseeker kernel: [ 1675.297106] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 17:46:35 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 17:46:35 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:46:36 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:46:36 taoseeker kernel: [ 1676.554337] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:46:36 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:46:36 taoseeker kernel: [ 1676.565445] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:46:36 taoseeker kernel: [ 1676.769089] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:46:36 taoseeker kernel: [ 1676.973090] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 17:46:37 taoseeker kernel: [ 1677.177075] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 17:46:37 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 17:46:37 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:46:38 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:46:38 taoseeker kernel: [ 1678.434365] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:46:38 taoseeker kernel: [ 1678.445431] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:46:38 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:46:38 taoseeker kernel: [ 1678.649061] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:46:38 taoseeker kernel: [ 1678.853063] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 17:46:38 taoseeker kernel: [ 1679.057056] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 17:46:38 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 17:46:39 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:46:40 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:46:40 taoseeker kernel: [ 1680.314298] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:46:40 taoseeker kernel: [ 1680.325394] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:46:40 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:46:40 taoseeker kernel: [ 1680.529039] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:46:40 taoseeker kernel: [ 1680.733043] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 17:46:40 taoseeker kernel: [ 1680.937029] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 17:46:40 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 17:46:40 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:46:42 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:46:42 taoseeker kernel: [ 1682.194254] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:46:42 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:46:42 taoseeker kernel: [ 1682.205346] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:46:42 taoseeker kernel: [ 1682.409070] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:46:42 taoseeker kernel: [ 1682.613011] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 17:46:42 taoseeker kernel: [ 1682.817004] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 17:46:42 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 17:46:42 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:46:43 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:46:43 taoseeker kernel: [ 1684.074253] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:46:43 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:46:43 taoseeker kernel: [ 1684.085426] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:46:44 taoseeker kernel: [ 1684.289001] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:46:44 taoseeker kernel: [ 1684.492989] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 17:46:44 taoseeker kernel: [ 1684.696984] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 17:46:44 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 17:46:44 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:46:45 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:46:45 taoseeker kernel: [ 1685.954196] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:46:45 taoseeker kernel: [ 1685.965340] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:46:45 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:46:46 taoseeker kernel: [ 1686.168967] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:46:46 taoseeker kernel: [ 1686.372968] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 17:46:46 taoseeker kernel: [ 1686.576976] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 17:46:46 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 17:46:46 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:46:47 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:46:47 taoseeker kernel: [ 1687.842203] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:46:47 taoseeker kernel: [ 1687.853313] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:46:47 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:46:47 taoseeker kernel: [ 1688.056941] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:46:48 taoseeker kernel: [ 1688.260942] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 17:46:48 taoseeker kernel: [ 1688.464934] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 17:46:48 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 17:46:48 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:46:48 taoseeker NetworkManager[800]: Activation (wlan2/wireless): association took too long. Oct 5 17:46:48 taoseeker NetworkManager[800]: (wlan2): device state change: config -> need-auth (reason 'none') [50 60 0] Oct 5 17:46:48 taoseeker NetworkManager[800]: Activation (wlan2/wireless): asking for new secrets Oct 5 17:46:48 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> disconnected Oct 5 17:46:48 taoseeker NetworkManager[800]: Couldn't disconnect supplicant interface: This interface is not connected. Oct 5 17:48:17 taoseeker NetworkManager[800]: No agents were available for this request. Oct 5 17:48:17 taoseeker NetworkManager[800]: (wlan2): device state change: need-auth -> failed (reason 'no-secrets') [60 120 7] Oct 5 17:48:17 taoseeker NetworkManager[800]: Marking connection 'Telenor6904ett' invalid. Oct 5 17:48:17 taoseeker NetworkManager[800]: Activation (wlan2) failed for connection 'Telenor6904ett' Oct 5 17:48:17 taoseeker NetworkManager[800]: (wlan2): device state change: failed -> disconnected (reason 'none') [120 30 0] Oct 5 17:48:17 taoseeker NetworkManager[800]: (wlan2): deactivating device (reason 'none') [0] Oct 5 17:48:23 taoseeker NetworkManager[800]: Activation (wlan2) starting connection 'Telenor6904ett' Oct 5 17:48:23 taoseeker NetworkManager[800]: (wlan2): device state change: disconnected -> prepare (reason 'none') [30 40 0] Oct 5 17:48:23 taoseeker NetworkManager[800]: Activation (wlan2) Stage 1 of 5 (Device Prepare) scheduled... Oct 5 17:48:23 taoseeker NetworkManager[800]: Activation (wlan2) Stage 1 of 5 (Device Prepare) started... Oct 5 17:48:23 taoseeker NetworkManager[800]: Activation (wlan2) Stage 2 of 5 (Device Configure) scheduled... Oct 5 17:48:23 taoseeker NetworkManager[800]: Activation (wlan2) Stage 1 of 5 (Device Prepare) complete. Oct 5 17:48:23 taoseeker NetworkManager[800]: Activation (wlan2) Stage 2 of 5 (Device Configure) starting... Oct 5 17:48:23 taoseeker NetworkManager[800]: (wlan2): device state change: prepare -> config (reason 'none') [40 50 0] Oct 5 17:48:24 taoseeker NetworkManager[800]: Activation (wlan2/wireless): access point 'Telenor6904ett' has security, but secrets are required. Oct 5 17:48:24 taoseeker NetworkManager[800]: (wlan2): device state change: config -> need-auth (reason 'none') [50 60 0] Oct 5 17:48:24 taoseeker NetworkManager[800]: Activation (wlan2) Stage 2 of 5 (Device Configure) complete. Oct 5 17:48:24 taoseeker NetworkManager[800]: Activation (wlan2) Stage 1 of 5 (Device Prepare) scheduled... Oct 5 17:48:24 taoseeker NetworkManager[800]: Activation (wlan2) Stage 1 of 5 (Device Prepare) started... Oct 5 17:48:24 taoseeker NetworkManager[800]: (wlan2): device state change: need-auth -> prepare (reason 'none') [60 40 0] Oct 5 17:48:24 taoseeker NetworkManager[800]: Activation (wlan2) Stage 2 of 5 (Device Configure) scheduled... Oct 5 17:48:24 taoseeker NetworkManager[800]: Activation (wlan2) Stage 1 of 5 (Device Prepare) complete. Oct 5 17:48:24 taoseeker NetworkManager[800]: Activation (wlan2) Stage 2 of 5 (Device Configure) starting... Oct 5 17:48:24 taoseeker NetworkManager[800]: (wlan2): device state change: prepare -> config (reason 'none') [40 50 0] Oct 5 17:48:24 taoseeker NetworkManager[800]: Activation (wlan2/wireless): connection 'Telenor6904ett' has security, and secrets exist. No new secrets needed. Oct 5 17:48:24 taoseeker NetworkManager[800]: Config: added 'ssid' value 'Telenor6904ett' Oct 5 17:48:24 taoseeker NetworkManager[800]: Config: added 'scan_ssid' value '1' Oct 5 17:48:24 taoseeker NetworkManager[800]: Config: added 'key_mgmt' value 'WPA-PSK' Oct 5 17:48:24 taoseeker NetworkManager[800]: Config: added 'auth_alg' value 'OPEN' Oct 5 17:48:24 taoseeker NetworkManager[800]: Config: added 'psk' value '' Oct 5 17:48:24 taoseeker NetworkManager[800]: Activation (wlan2) Stage 2 of 5 (Device Configure) complete. Oct 5 17:48:24 taoseeker NetworkManager[800]: Config: set interface ap_scan to 1 Oct 5 17:48:24 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:48:25 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:48:25 taoseeker kernel: [ 1785.372944] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:48:25 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:48:25 taoseeker kernel: [ 1785.384101] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:48:25 taoseeker wpa_supplicant[1011]: wlan2: Trying to associate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:48:25 taoseeker kernel: [ 1785.389068] wlan2: authenticated Oct 5 17:48:25 taoseeker kernel: [ 1785.389613] wlan2: associating with AP with corrupt beacon Oct 5 17:48:25 taoseeker kernel: [ 1785.391741] wlan2: associate with 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:48:25 taoseeker kernel: [ 1785.394244] wlan2: RX AssocResp from 50:67:f0:d3:ed:c4 (capab=0xc11 status=0 aid=1) Oct 5 17:48:25 taoseeker kernel: [ 1785.394825] wlan2: associated Oct 5 17:48:25 taoseeker kernel: [ 1785.395397] IPv6: ADDRCONF(NETDEV_CHANGE): wlan2: link becomes ready Oct 5 17:48:25 taoseeker kernel: [ 1785.395590] cfg80211: Pending regulatory request, waiting for it to be processed... Oct 5 17:48:25 taoseeker wpa_supplicant[1011]: wlan2: Associated with 50:67:f0:d3:ed:c4 Oct 5 17:48:25 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> associating Oct 5 17:48:25 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associating -> associated Oct 5 17:48:26 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associated -> 4-way handshake Oct 5 17:48:26 taoseeker wpa_supplicant[1011]: wlan2: WPA: Key negotiation completed with 50:67:f0:d3:ed:c4 [PTK=CCMP GTK=CCMP] Oct 5 17:48:26 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-CONNECTED - Connection to 50:67:f0:d3:ed:c4 completed (reauth) [id=0 id_str=] Oct 5 17:48:26 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: 4-way handshake -> completed Oct 5 17:48:26 taoseeker NetworkManager[800]: Activation (wlan2/wireless) Stage 2 of 5 (Device Configure) successful. Connected to wireless network 'Telenor6904ett'. Oct 5 17:48:26 taoseeker NetworkManager[800]: Activation (wlan2) Stage 3 of 5 (IP Configure Start) scheduled. Oct 5 17:48:26 taoseeker NetworkManager[800]: Activation (wlan2) Stage 3 of 5 (IP Configure Start) started... Oct 5 17:48:26 taoseeker NetworkManager[800]: (wlan2): device state change: config -> ip-config (reason 'none') [50 70 0] Oct 5 17:48:26 taoseeker NetworkManager[800]: Activation (wlan2) Beginning DHCPv4 transaction (timeout in 45 seconds) Oct 5 17:48:26 taoseeker NetworkManager[800]: dhclient started with pid 1851 Oct 5 17:48:26 taoseeker NetworkManager[800]: Activation (wlan2) Beginning IP6 addrconf. Oct 5 17:48:26 taoseeker NetworkManager[800]: Activation (wlan2) Stage 3 of 5 (IP Configure Start) complete. Oct 5 17:48:26 taoseeker dhclient: Internet Systems Consortium DHCP Client 4.2.4 Oct 5 17:48:26 taoseeker dhclient: Copyright 2004-2012 Internet Systems Consortium. Oct 5 17:48:26 taoseeker dhclient: All rights reserved. Oct 5 17:48:26 taoseeker dhclient: For info, please visit https://www.isc.org/software/dhcp/ Oct 5 17:48:26 taoseeker dhclient: Oct 5 17:48:26 taoseeker dhclient: Listening on LPF/wlan2/00:14:51:81:6a:17 Oct 5 17:48:26 taoseeker dhclient: Sending on LPF/wlan2/00:14:51:81:6a:17 Oct 5 17:48:26 taoseeker dhclient: Sending on Socket/fallback Oct 5 17:48:26 taoseeker dhclient: DHCPREQUEST of 10.0.0.66 on wlan2 to 255.255.255.255 port 67 Oct 5 17:48:26 taoseeker NetworkManager[800]: (wlan2): DHCPv4 state changed nbi -> preinit Oct 5 17:48:26 taoseeker dhclient: DHCPACK of 10.0.0.66 from 10.0.0.138 Oct 5 17:48:26 taoseeker dhclient: bound to 10.0.0.66 -- renewal in 37023 seconds. Oct 5 17:48:26 taoseeker NetworkManager[800]: (wlan2): DHCPv4 state changed preinit -> reboot Oct 5 17:48:26 taoseeker NetworkManager[800]: address 10.0.0.66 Oct 5 17:48:26 taoseeker NetworkManager[800]: prefix 24 (255.255.255.0) Oct 5 17:48:26 taoseeker NetworkManager[800]: gateway 10.0.0.138 Oct 5 17:48:26 taoseeker NetworkManager[800]: hostname 'taoseeker' Oct 5 17:48:26 taoseeker NetworkManager[800]: nameserver '130.67.15.198' Oct 5 17:48:26 taoseeker NetworkManager[800]: nameserver '193.213.112.4' Oct 5 17:48:26 taoseeker NetworkManager[800]: nameserver '10.0.0.138' Oct 5 17:48:26 taoseeker NetworkManager[800]: domain name 'lan' Oct 5 17:48:26 taoseeker NetworkManager[800]: Activation (wlan2) Stage 5 of 5 (IPv4 Configure Commit) scheduled... Oct 5 17:48:26 taoseeker NetworkManager[800]: Activation (wlan2) Stage 5 of 5 (IPv4 Commit) started... Oct 5 17:48:27 taoseeker NetworkManager[800]: (wlan2): device state change: ip-config -> activated (reason 'none') [70 100 0] Oct 5 17:48:27 taoseeker NetworkManager[800]: ((null)): writing resolv.conf to /sbin/resolvconf Oct 5 17:48:28 taoseeker NetworkManager[800]: Policy set 'Telenor6904ett' (wlan2) as default for IPv4 routing and DNS. Oct 5 17:48:28 taoseeker NetworkManager[800]: Activation (wlan2) successful, device activated. Oct 5 17:48:28 taoseeker NetworkManager[800]: Activation (wlan2) Stage 5 of 5 (IPv4 Commit) complete. Oct 5 17:48:46 taoseeker NetworkManager[800]: (wlan2): IP6 addrconf timed out or failed. Oct 5 17:48:46 taoseeker NetworkManager[800]: Activation (wlan2) Stage 4 of 5 (IPv6 Configure Timeout) scheduled... Oct 5 17:48:46 taoseeker NetworkManager[800]: Activation (wlan2) Stage 4 of 5 (IPv6 Configure Timeout) started... Oct 5 17:48:46 taoseeker NetworkManager[800]: Activation (wlan2) Stage 4 of 5 (IPv6 Configure Timeout) complete. Oct 5 17:52:37 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-DISCONNECTED bssid=50:67:f0:d3:ed:c4 reason=4 Oct 5 17:52:37 taoseeker kernel: [ 2037.495572] ieee80211 phy0: >wlan2: No probe response from AP 50:67:f0:d3:ed:c4 after 500ms, disconnecting. Oct 5 17:52:37 taoseeker kernel: [ 2037.500303] cfg80211: All devices are disconnected, going to restore regulatory settings Oct 5 17:52:37 taoseeker kernel: [ 2037.500321] cfg80211: Restoring regulatory settings Oct 5 17:52:37 taoseeker kernel: [ 2037.500337] cfg80211: Calling CRDA for country: NO Oct 5 17:52:37 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: completed -> disconnected Oct 5 17:52:37 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:52:38 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:52:38 taoseeker kernel: [ 2038.752721] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:52:38 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:52:38 taoseeker kernel: [ 2038.763883] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:52:38 taoseeker kernel: [ 2038.967512] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:52:39 taoseeker kernel: [ 2039.171506] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 17:52:39 taoseeker wpa_supplicant[1011]: wlan2: Trying to associate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:52:39 taoseeker kernel: [ 2039.178467] wlan2: authenticated Oct 5 17:52:39 taoseeker kernel: [ 2039.179069] wlan2: associating with AP with corrupt beacon Oct 5 17:52:39 taoseeker kernel: [ 2039.179870] wlan2: associate with 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:52:39 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> associating Oct 5 17:52:39 taoseeker wpa_supplicant[1011]: wlan2: Associated with 50:67:f0:d3:ed:c4 Oct 5 17:52:39 taoseeker kernel: [ 2039.183967] wlan2: RX AssocResp from 50:67:f0:d3:ed:c4 (capab=0xc11 status=0 aid=1) Oct 5 17:52:39 taoseeker kernel: [ 2039.184657] wlan2: associated Oct 5 17:52:39 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associating -> associated Oct 5 17:52:39 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associated -> 4-way handshake Oct 5 17:52:39 taoseeker wpa_supplicant[1011]: wlan2: WPA: Key negotiation completed with 50:67:f0:d3:ed:c4 [PTK=CCMP GTK=CCMP] Oct 5 17:52:39 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-CONNECTED - Connection to 50:67:f0:d3:ed:c4 completed (reauth) [id=0 id_str=] Oct 5 17:52:39 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: 4-way handshake -> completed Oct 5 17:52:59 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-DISCONNECTED bssid=50:67:f0:d3:ed:c4 reason=4 Oct 5 17:52:59 taoseeker kernel: [ 2059.491063] ieee80211 phy0: >wlan2: No probe response from AP 50:67:f0:d3:ed:c4 after 500ms, disconnecting. Oct 5 17:52:59 taoseeker kernel: [ 2059.493107] cfg80211: All devices are disconnected, going to restore regulatory settings Oct 5 17:52:59 taoseeker kernel: [ 2059.493125] cfg80211: Restoring regulatory settings Oct 5 17:52:59 taoseeker kernel: [ 2059.493139] cfg80211: Calling CRDA to update world regulatory domain Oct 5 17:52:59 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: completed -> disconnected Oct 5 17:52:59 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:53:00 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:53:00 taoseeker kernel: [ 2060.748181] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:53:00 taoseeker kernel: [ 2060.759597] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:53:00 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:53:00 taoseeker wpa_supplicant[1011]: wlan2: Trying to associate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:53:00 taoseeker kernel: [ 2060.963011] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:53:00 taoseeker kernel: [ 2060.965373] wlan2: authenticated Oct 5 17:53:00 taoseeker kernel: [ 2060.965937] wlan2: associating with AP with corrupt beacon Oct 5 17:53:00 taoseeker kernel: [ 2060.967048] wlan2: associate with 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:53:00 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> associating Oct 5 17:53:01 taoseeker kernel: [ 2061.171006] wlan2: associate with 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:53:01 taoseeker kernel: [ 2061.374992] wlan2: associate with 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 17:53:01 taoseeker kernel: [ 2061.578993] wlan2: association with 50:67:f0:d3:ed:c4 timed out Oct 5 17:53:01 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associating -> disconnected Oct 5 17:53:01 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:53:02 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:53:02 taoseeker kernel: [ 2062.836175] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:53:02 taoseeker kernel: [ 2062.847332] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:53:02 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:53:02 taoseeker kernel: [ 2063.050966] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:53:03 taoseeker kernel: [ 2063.254959] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 17:53:03 taoseeker kernel: [ 2063.458968] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 17:53:03 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 17:53:03 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:53:04 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:53:04 taoseeker kernel: [ 2064.716070] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:53:04 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:53:04 taoseeker kernel: [ 2064.727292] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:53:04 taoseeker kernel: [ 2064.930919] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:53:05 taoseeker kernel: [ 2065.134919] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 17:53:05 taoseeker kernel: [ 2065.338909] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 17:53:05 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 17:53:05 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:53:06 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:53:06 taoseeker kernel: [ 2066.596035] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:53:06 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:53:06 taoseeker kernel: [ 2066.607260] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:53:06 taoseeker wpa_supplicant[1011]: wlan2: Trying to associate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:53:06 taoseeker kernel: [ 2066.810882] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:53:06 taoseeker kernel: [ 2066.814111] wlan2: authenticated Oct 5 17:53:06 taoseeker kernel: [ 2066.814649] wlan2: associating with AP with corrupt beacon Oct 5 17:53:06 taoseeker kernel: [ 2066.815037] wlan2: associate with 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:53:06 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> associating Oct 5 17:53:06 taoseeker kernel: [ 2066.837575] wlan2: RX AssocResp from 50:67:f0:d3:ed:c4 (capab=0xc11 status=0 aid=1) Oct 5 17:53:06 taoseeker kernel: [ 2066.838089] wlan2: associated Oct 5 17:53:06 taoseeker kernel: [ 2066.838744] cfg80211: Pending regulatory request, waiting for it to be processed... Oct 5 17:53:06 taoseeker wpa_supplicant[1011]: wlan2: Associated with 50:67:f0:d3:ed:c4 Oct 5 17:53:06 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associating -> associated Oct 5 17:53:07 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associated -> 4-way handshake Oct 5 17:53:07 taoseeker wpa_supplicant[1011]: wlan2: WPA: Key negotiation completed with 50:67:f0:d3:ed:c4 [PTK=CCMP GTK=CCMP] Oct 5 17:53:07 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-CONNECTED - Connection to 50:67:f0:d3:ed:c4 completed (reauth) [id=0 id_str=] Oct 5 17:53:07 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: 4-way handshake -> completed Oct 5 17:53:22 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-DISCONNECTED bssid=50:67:f0:d3:ed:c4 reason=4 Oct 5 17:53:22 taoseeker kernel: [ 2082.490564] ieee80211 phy0: >wlan2: No probe response from AP 50:67:f0:d3:ed:c4 after 500ms, disconnecting. Oct 5 17:53:22 taoseeker kernel: [ 2082.495224] cfg80211: All devices are disconnected, going to restore regulatory settings Oct 5 17:53:22 taoseeker kernel: [ 2082.495243] cfg80211: Restoring regulatory settings Oct 5 17:53:22 taoseeker kernel: [ 2082.495258] cfg80211: Calling CRDA to update world regulatory domain Oct 5 17:53:22 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: completed -> disconnected Oct 5 17:53:22 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:53:23 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:53:23 taoseeker kernel: [ 2083.747674] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:53:23 taoseeker kernel: [ 2083.758878] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:53:23 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:53:23 taoseeker wpa_supplicant[1011]: wlan2: Trying to associate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:53:23 taoseeker kernel: [ 2083.962501] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:53:23 taoseeker kernel: [ 2083.963956] wlan2: authenticated Oct 5 17:53:23 taoseeker kernel: [ 2083.964999] wlan2: associating with AP with corrupt beacon Oct 5 17:53:23 taoseeker kernel: [ 2083.966536] wlan2: associate with 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:53:23 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> associating Oct 5 17:53:24 taoseeker kernel: [ 2084.170505] wlan2: associate with 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:53:24 taoseeker kernel: [ 2084.374493] wlan2: associate with 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 17:53:24 taoseeker kernel: [ 2084.578485] wlan2: association with 50:67:f0:d3:ed:c4 timed out Oct 5 17:53:24 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associating -> disconnected Oct 5 17:53:24 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:53:25 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:53:25 taoseeker kernel: [ 2085.835990] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:53:25 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:53:25 taoseeker kernel: [ 2085.846842] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:53:25 taoseeker NetworkManager[800]: (wlan2): roamed from BSSID 50:67:F0:D3:ED:C4 (Telenor6904ett) to (none) ((none)) Oct 5 17:53:25 taoseeker kernel: [ 2086.050470] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:53:26 taoseeker kernel: [ 2086.254460] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 17:53:26 taoseeker kernel: [ 2086.458443] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 17:53:26 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 17:53:26 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:53:27 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:53:27 taoseeker kernel: [ 2087.723608] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:53:27 taoseeker kernel: [ 2087.734796] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:53:27 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:53:27 taoseeker kernel: [ 2087.938419] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:53:28 taoseeker kernel: [ 2088.142418] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 17:53:28 taoseeker kernel: [ 2088.346408] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 17:53:28 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 17:53:28 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:53:29 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:53:29 taoseeker kernel: [ 2089.603608] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:53:29 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:53:29 taoseeker kernel: [ 2089.614740] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:53:29 taoseeker kernel: [ 2089.818376] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:53:29 taoseeker kernel: [ 2090.022365] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 17:53:30 taoseeker kernel: [ 2090.226367] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 17:53:30 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 17:53:30 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:53:31 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:53:31 taoseeker kernel: [ 2091.483569] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:53:31 taoseeker wpa_supplicant[1011]: wlan2: Trying to associate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:53:31 taoseeker kernel: [ 2091.494698] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:53:31 taoseeker kernel: [ 2091.496299] wlan2: authenticated Oct 5 17:53:31 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:53:31 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> associating Oct 5 17:53:31 taoseeker kernel: [ 2091.506402] wlan2: associating with AP with corrupt beacon Oct 5 17:53:31 taoseeker kernel: [ 2091.510403] wlan2: associate with 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:53:31 taoseeker kernel: [ 2091.714332] wlan2: associate with 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:53:31 taoseeker kernel: [ 2091.918331] wlan2: associate with 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 17:53:31 taoseeker kernel: [ 2091.922155] wlan2: RX AssocResp from 50:67:f0:d3:ed:c4 (capab=0xc11 status=0 aid=1) Oct 5 17:53:31 taoseeker kernel: [ 2091.922680] wlan2: associated Oct 5 17:53:31 taoseeker kernel: [ 2091.923332] cfg80211: Pending regulatory request, waiting for it to be processed... Oct 5 17:53:31 taoseeker wpa_supplicant[1011]: wlan2: Associated with 50:67:f0:d3:ed:c4 Oct 5 17:53:31 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associating -> associated Oct 5 17:53:31 taoseeker NetworkManager[800]: (wlan2): roamed from BSSID (none) ((none)) to 50:67:F0:D3:ED:C4 (Telenor6904ett) Oct 5 17:53:32 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associated -> 4-way handshake Oct 5 17:53:32 taoseeker wpa_supplicant[1011]: wlan2: WPA: Key negotiation completed with 50:67:f0:d3:ed:c4 [PTK=CCMP GTK=CCMP] Oct 5 17:53:32 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-CONNECTED - Connection to 50:67:f0:d3:ed:c4 completed (reauth) [id=0 id_str=] Oct 5 17:53:32 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: 4-way handshake -> completed Oct 5 17:53:35 taoseeker kernel: [ 2095.362219] wlan2: deauthenticated from 50:67:f0:d3:ed:c4 (Reason: 15) Oct 5 17:53:35 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-DISCONNECTED bssid=50:67:f0:d3:ed:c4 reason=15 Oct 5 17:53:35 taoseeker kernel: [ 2095.364362] cfg80211: All devices are disconnected, going to restore regulatory settings Oct 5 17:53:35 taoseeker kernel: [ 2095.364376] cfg80211: Restoring regulatory settings Oct 5 17:53:35 taoseeker kernel: [ 2095.364392] cfg80211: Calling CRDA for country: NO Oct 5 17:53:35 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: completed -> disconnected Oct 5 17:53:35 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:53:36 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:53:36 taoseeker kernel: [ 2096.619471] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:53:36 taoseeker wpa_supplicant[1011]: wlan2: Trying to associate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:53:36 taoseeker kernel: [ 2096.630581] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:53:36 taoseeker kernel: [ 2096.632182] wlan2: authenticated Oct 5 17:53:36 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:53:36 taoseeker kernel: [ 2096.636131] wlan2: associating with AP with corrupt beacon Oct 5 17:53:36 taoseeker kernel: [ 2096.638306] wlan2: associate with 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:53:36 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> associating Oct 5 17:53:36 taoseeker kernel: [ 2096.842233] wlan2: associate with 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:53:36 taoseeker kernel: [ 2096.844736] wlan2: RX AssocResp from 50:67:f0:d3:ed:c4 (capab=0xc11 status=0 aid=1) Oct 5 17:53:36 taoseeker kernel: [ 2096.845230] wlan2: associated Oct 5 17:53:36 taoseeker wpa_supplicant[1011]: wlan2: Associated with 50:67:f0:d3:ed:c4 Oct 5 17:53:36 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associating -> associated Oct 5 17:53:37 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associated -> 4-way handshake Oct 5 17:53:38 taoseeker wpa_supplicant[1011]: wlan2: WPA: Key negotiation completed with 50:67:f0:d3:ed:c4 [PTK=CCMP GTK=CCMP] Oct 5 17:53:38 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-CONNECTED - Connection to 50:67:f0:d3:ed:c4 completed (reauth) [id=0 id_str=] Oct 5 17:53:38 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: 4-way handshake -> completed Oct 5 17:53:41 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-DISCONNECTED bssid=50:67:f0:d3:ed:c4 reason=15 Oct 5 17:53:41 taoseeker kernel: [ 2101.182237] wlan2: deauthenticated from 50:67:f0:d3:ed:c4 (Reason: 15) Oct 5 17:53:41 taoseeker kernel: [ 2101.183822] cfg80211: All devices are disconnected, going to restore regulatory settings Oct 5 17:53:41 taoseeker kernel: [ 2101.183838] cfg80211: Restoring regulatory settings Oct 5 17:53:41 taoseeker kernel: [ 2101.183851] cfg80211: Calling CRDA to update world regulatory domain Oct 5 17:53:41 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: completed -> disconnected Oct 5 17:53:41 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:53:42 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:53:42 taoseeker kernel: [ 2102.439697] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:53:42 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:53:42 taoseeker kernel: [ 2102.450468] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:53:42 taoseeker kernel: [ 2102.654103] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:53:42 taoseeker kernel: [ 2102.858105] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 17:53:42 taoseeker wpa_supplicant[1011]: wlan2: Trying to associate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:53:42 taoseeker kernel: [ 2102.862391] wlan2: authenticated Oct 5 17:53:42 taoseeker kernel: [ 2102.863632] wlan2: associating with AP with corrupt beacon Oct 5 17:53:42 taoseeker kernel: [ 2102.866157] wlan2: associate with 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:53:42 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> associating Oct 5 17:53:42 taoseeker kernel: [ 2103.070101] wlan2: associate with 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:53:42 taoseeker kernel: [ 2103.072501] wlan2: RX AssocResp from 50:67:f0:d3:ed:c4 (capab=0xc11 status=0 aid=1) Oct 5 17:53:42 taoseeker kernel: [ 2103.072998] wlan2: associated Oct 5 17:53:42 taoseeker kernel: [ 2103.073641] cfg80211: Pending regulatory request, waiting for it to be processed... Oct 5 17:53:42 taoseeker wpa_supplicant[1011]: wlan2: Associated with 50:67:f0:d3:ed:c4 Oct 5 17:53:42 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associating -> associated Oct 5 17:53:43 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associated -> 4-way handshake Oct 5 17:53:46 taoseeker wpa_supplicant[1011]: wlan2: WPA: Key negotiation completed with 50:67:f0:d3:ed:c4 [PTK=CCMP GTK=CCMP] Oct 5 17:53:46 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-CONNECTED - Connection to 50:67:f0:d3:ed:c4 completed (reauth) [id=0 id_str=] Oct 5 17:53:46 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: 4-way handshake -> completed Oct 5 17:53:49 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-DISCONNECTED bssid=50:67:f0:d3:ed:c4 reason=15 Oct 5 17:53:49 taoseeker kernel: [ 2109.382216] wlan2: deauthenticated from 50:67:f0:d3:ed:c4 (Reason: 15) Oct 5 17:53:49 taoseeker kernel: [ 2109.384378] cfg80211: All devices are disconnected, going to restore regulatory settings Oct 5 17:53:49 taoseeker kernel: [ 2109.384395] cfg80211: Restoring regulatory settings Oct 5 17:53:49 taoseeker kernel: [ 2109.384409] cfg80211: Calling CRDA to update world regulatory domain Oct 5 17:53:49 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: completed -> disconnected Oct 5 17:53:49 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:53:50 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:53:50 taoseeker kernel: [ 2110.639145] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:53:50 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:53:50 taoseeker kernel: [ 2110.650284] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:53:50 taoseeker kernel: [ 2110.853937] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:53:50 taoseeker kernel: [ 2111.057930] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 17:53:51 taoseeker kernel: [ 2111.261925] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 17:53:51 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 17:53:51 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:53:52 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:53:52 taoseeker kernel: [ 2112.519147] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:53:52 taoseeker kernel: [ 2112.530259] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:53:52 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:53:52 taoseeker kernel: [ 2112.733900] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:53:52 taoseeker kernel: [ 2112.937887] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 17:53:53 taoseeker kernel: [ 2113.141887] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 17:53:53 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 17:53:53 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:53:54 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:53:54 taoseeker kernel: [ 2114.399114] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:53:54 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:53:54 taoseeker kernel: [ 2114.410215] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:53:54 taoseeker kernel: [ 2114.613854] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:53:54 taoseeker kernel: [ 2114.817851] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 17:53:54 taoseeker kernel: [ 2115.021844] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 17:53:54 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 17:53:55 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:53:56 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:53:56 taoseeker kernel: [ 2116.278983] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:53:56 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:53:56 taoseeker kernel: [ 2116.290177] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:53:56 taoseeker wpa_supplicant[1011]: wlan2: Trying to associate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:53:56 taoseeker kernel: [ 2116.493817] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:53:56 taoseeker kernel: [ 2116.497161] wlan2: authenticated Oct 5 17:53:56 taoseeker kernel: [ 2116.498553] wlan2: associating with AP with corrupt beacon Oct 5 17:53:56 taoseeker kernel: [ 2116.501849] wlan2: associate with 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:53:56 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> associating Oct 5 17:53:56 taoseeker kernel: [ 2116.508667] wlan2: RX AssocResp from 50:67:f0:d3:ed:c4 (capab=0xc11 status=0 aid=1) Oct 5 17:53:56 taoseeker kernel: [ 2116.509160] wlan2: associated Oct 5 17:53:56 taoseeker kernel: [ 2116.509864] cfg80211: Pending regulatory request, waiting for it to be processed... Oct 5 17:53:56 taoseeker wpa_supplicant[1011]: wlan2: Associated with 50:67:f0:d3:ed:c4 Oct 5 17:53:56 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associating -> associated Oct 5 17:53:57 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associated -> 4-way handshake Oct 5 17:53:57 taoseeker wpa_supplicant[1011]: wlan2: WPA: Key negotiation completed with 50:67:f0:d3:ed:c4 [PTK=CCMP GTK=CCMP] Oct 5 17:53:57 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-CONNECTED - Connection to 50:67:f0:d3:ed:c4 completed (reauth) [id=0 id_str=] Oct 5 17:53:57 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: 4-way handshake -> completed Oct 5 17:54:10 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-DISCONNECTED bssid=50:67:f0:d3:ed:c4 reason=4 Oct 5 17:54:10 taoseeker kernel: [ 2130.493545] ieee80211 phy0: >wlan2: No probe response from AP 50:67:f0:d3:ed:c4 after 500ms, disconnecting. Oct 5 17:54:10 taoseeker kernel: [ 2130.495903] cfg80211: All devices are disconnected, going to restore regulatory settings Oct 5 17:54:10 taoseeker kernel: [ 2130.495921] cfg80211: Restoring regulatory settings Oct 5 17:54:10 taoseeker kernel: [ 2130.495939] cfg80211: Calling CRDA for country: NO Oct 5 17:54:10 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: completed -> disconnected Oct 5 17:54:10 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:54:11 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:54:11 taoseeker kernel: [ 2131.750703] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:54:11 taoseeker kernel: [ 2131.761868] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:54:11 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:54:11 taoseeker wpa_supplicant[1011]: wlan2: Trying to associate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:54:11 taoseeker kernel: [ 2131.766369] wlan2: authenticated Oct 5 17:54:11 taoseeker kernel: [ 2131.768798] wlan2: associating with AP with corrupt beacon Oct 5 17:54:11 taoseeker kernel: [ 2131.769548] wlan2: associate with 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:54:11 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> associating Oct 5 17:54:11 taoseeker kernel: [ 2131.973502] wlan2: associate with 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:54:12 taoseeker kernel: [ 2132.177504] wlan2: associate with 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 17:54:12 taoseeker kernel: [ 2132.381490] wlan2: association with 50:67:f0:d3:ed:c4 timed out Oct 5 17:54:12 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associating -> disconnected Oct 5 17:54:12 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:54:13 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:54:13 taoseeker kernel: [ 2133.638667] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:54:13 taoseeker kernel: [ 2133.649820] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:54:13 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:54:13 taoseeker wpa_supplicant[1011]: wlan2: Trying to associate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:54:13 taoseeker kernel: [ 2133.853467] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:54:13 taoseeker kernel: [ 2133.854978] wlan2: authenticated Oct 5 17:54:13 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> associating Oct 5 17:54:13 taoseeker kernel: [ 2133.861510] wlan2: associating with AP with corrupt beacon Oct 5 17:54:13 taoseeker kernel: [ 2133.865513] wlan2: associate with 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:54:13 taoseeker NetworkManager[800]: (wlan2): roamed from BSSID 50:67:F0:D3:ED:C4 (Telenor6904ett) to (none) ((none)) Oct 5 17:54:13 taoseeker kernel: [ 2134.069464] wlan2: associate with 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:54:13 taoseeker wpa_supplicant[1011]: wlan2: Associated with 50:67:f0:d3:ed:c4 Oct 5 17:54:13 taoseeker kernel: [ 2134.074557] wlan2: RX AssocResp from 50:67:f0:d3:ed:c4 (capab=0xc11 status=0 aid=1) Oct 5 17:54:13 taoseeker kernel: [ 2134.075038] wlan2: associated Oct 5 17:54:13 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associating -> associated Oct 5 17:54:14 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associated -> 4-way handshake Oct 5 17:54:14 taoseeker wpa_supplicant[1011]: wlan2: WPA: Key negotiation completed with 50:67:f0:d3:ed:c4 [PTK=CCMP GTK=CCMP] Oct 5 17:54:14 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-CONNECTED - Connection to 50:67:f0:d3:ed:c4 completed (reauth) [id=0 id_str=] Oct 5 17:54:14 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: 4-way handshake -> completed Oct 5 17:54:17 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-DISCONNECTED bssid=50:67:f0:d3:ed:c4 reason=15 Oct 5 17:54:17 taoseeker kernel: [ 2137.362205] wlan2: deauthenticated from 50:67:f0:d3:ed:c4 (Reason: 15) Oct 5 17:54:17 taoseeker kernel: [ 2137.364269] cfg80211: All devices are disconnected, going to restore regulatory settings Oct 5 17:54:17 taoseeker kernel: [ 2137.364286] cfg80211: Restoring regulatory settings Oct 5 17:54:17 taoseeker kernel: [ 2137.364299] cfg80211: Calling CRDA to update world regulatory domain Oct 5 17:54:17 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: completed -> disconnected Oct 5 17:54:17 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:54:18 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:54:18 taoseeker kernel: [ 2138.618569] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:54:18 taoseeker kernel: [ 2138.629727] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:54:18 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:54:18 taoseeker wpa_supplicant[1011]: wlan2: Trying to associate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:54:18 taoseeker kernel: [ 2138.833367] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:54:18 taoseeker kernel: [ 2138.834842] wlan2: authenticated Oct 5 17:54:18 taoseeker kernel: [ 2138.836082] wlan2: associating with AP with corrupt beacon Oct 5 17:54:18 taoseeker kernel: [ 2138.837398] wlan2: associate with 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:54:18 taoseeker kernel: [ 2138.839827] wlan2: RX AssocResp from 50:67:f0:d3:ed:c4 (capab=0xc11 status=0 aid=1) Oct 5 17:54:18 taoseeker kernel: [ 2138.840321] wlan2: associated Oct 5 17:54:18 taoseeker kernel: [ 2138.840971] cfg80211: Pending regulatory request, waiting for it to be processed... Oct 5 17:54:18 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> associating Oct 5 17:54:18 taoseeker wpa_supplicant[1011]: wlan2: Associated with 50:67:f0:d3:ed:c4 Oct 5 17:54:18 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associating -> associated Oct 5 17:54:19 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associated -> 4-way handshake Oct 5 17:54:19 taoseeker wpa_supplicant[1011]: wlan2: WPA: Key negotiation completed with 50:67:f0:d3:ed:c4 [PTK=CCMP GTK=CCMP] Oct 5 17:54:19 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-CONNECTED - Connection to 50:67:f0:d3:ed:c4 completed (reauth) [id=0 id_str=] Oct 5 17:54:19 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: 4-way handshake -> completed Oct 5 17:54:19 taoseeker NetworkManager[800]: (wlan2): roamed from BSSID (none) ((none)) to 50:67:F0:D3:ED:C4 (Telenor6904ett) Oct 5 17:54:22 taoseeker kernel: [ 2142.362248] wlan2: deauthenticated from 50:67:f0:d3:ed:c4 (Reason: 15) Oct 5 17:54:22 taoseeker kernel: [ 2142.363818] cfg80211: All devices are disconnected, going to restore regulatory settings Oct 5 17:54:22 taoseeker kernel: [ 2142.363834] cfg80211: Restoring regulatory settings Oct 5 17:54:22 taoseeker kernel: [ 2142.363850] cfg80211: Calling CRDA for country: NO Oct 5 17:54:22 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-DISCONNECTED bssid=50:67:f0:d3:ed:c4 reason=15 Oct 5 17:54:22 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: completed -> disconnected Oct 5 17:54:22 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:54:23 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:54:23 taoseeker kernel: [ 2143.618483] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:54:23 taoseeker kernel: [ 2143.629642] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:54:23 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:54:23 taoseeker kernel: [ 2143.833265] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:54:23 taoseeker wpa_supplicant[1011]: wlan2: Trying to associate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:54:23 taoseeker kernel: [ 2143.837465] wlan2: authenticated Oct 5 17:54:23 taoseeker kernel: [ 2143.838542] wlan2: associating with AP with corrupt beacon Oct 5 17:54:23 taoseeker kernel: [ 2143.841299] wlan2: associate with 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:54:23 taoseeker kernel: [ 2143.845229] wlan2: RX AssocResp from 50:67:f0:d3:ed:c4 (capab=0xc11 status=0 aid=1) Oct 5 17:54:23 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> associating Oct 5 17:54:23 taoseeker wpa_supplicant[1011]: wlan2: Associated with 50:67:f0:d3:ed:c4 Oct 5 17:54:23 taoseeker kernel: [ 2143.861559] wlan2: associated Oct 5 17:54:23 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associating -> associated Oct 5 17:54:24 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associated -> 4-way handshake Oct 5 17:54:26 taoseeker wpa_supplicant[1011]: wlan2: WPA: Key negotiation completed with 50:67:f0:d3:ed:c4 [PTK=CCMP GTK=CCMP] Oct 5 17:54:26 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-CONNECTED - Connection to 50:67:f0:d3:ed:c4 completed (reauth) [id=0 id_str=] Oct 5 17:54:26 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: 4-way handshake -> completed Oct 5 17:54:29 taoseeker kernel: [ 2149.362195] wlan2: deauthenticated from 50:67:f0:d3:ed:c4 (Reason: 15) Oct 5 17:54:29 taoseeker kernel: [ 2149.363718] cfg80211: All devices are disconnected, going to restore regulatory settings Oct 5 17:54:29 taoseeker kernel: [ 2149.363733] cfg80211: Restoring regulatory settings Oct 5 17:54:29 taoseeker kernel: [ 2149.363747] cfg80211: Calling CRDA to update world regulatory domain Oct 5 17:54:29 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-DISCONNECTED bssid=50:67:f0:d3:ed:c4 reason=15 Oct 5 17:54:29 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: completed -> disconnected Oct 5 17:54:29 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:54:30 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:54:30 taoseeker kernel: [ 2150.618387] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:54:30 taoseeker kernel: [ 2150.629496] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:54:30 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:54:30 taoseeker wpa_supplicant[1011]: wlan2: Trying to associate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:54:30 taoseeker kernel: [ 2150.833132] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:54:30 taoseeker kernel: [ 2150.835470] wlan2: authenticated Oct 5 17:54:30 taoseeker kernel: [ 2150.836718] wlan2: associating with AP with corrupt beacon Oct 5 17:54:30 taoseeker kernel: [ 2150.837164] wlan2: associate with 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:54:30 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> associating Oct 5 17:54:30 taoseeker kernel: [ 2151.041124] wlan2: associate with 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:54:30 taoseeker kernel: [ 2151.047975] wlan2: RX AssocResp from 50:67:f0:d3:ed:c4 (capab=0xc11 status=0 aid=1) Oct 5 17:54:30 taoseeker kernel: [ 2151.048467] wlan2: associated Oct 5 17:54:30 taoseeker kernel: [ 2151.049188] cfg80211: Pending regulatory request, waiting for it to be processed... Oct 5 17:54:30 taoseeker wpa_supplicant[1011]: wlan2: Associated with 50:67:f0:d3:ed:c4 Oct 5 17:54:30 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associating -> associated Oct 5 17:54:31 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associated -> 4-way handshake Oct 5 17:54:32 taoseeker wpa_supplicant[1011]: wlan2: WPA: Key negotiation completed with 50:67:f0:d3:ed:c4 [PTK=CCMP GTK=CCMP] Oct 5 17:54:32 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-CONNECTED - Connection to 50:67:f0:d3:ed:c4 completed (reauth) [id=0 id_str=] Oct 5 17:54:32 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: 4-way handshake -> completed Oct 5 17:54:56 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-DISCONNECTED bssid=50:67:f0:d3:ed:c4 reason=4 Oct 5 17:54:56 taoseeker kernel: [ 2176.492638] ieee80211 phy0: >wlan2: No probe response from AP 50:67:f0:d3:ed:c4 after 500ms, disconnecting. Oct 5 17:54:56 taoseeker kernel: [ 2176.497306] cfg80211: All devices are disconnected, going to restore regulatory settings Oct 5 17:54:56 taoseeker kernel: [ 2176.497323] cfg80211: Restoring regulatory settings Oct 5 17:54:56 taoseeker kernel: [ 2176.497337] cfg80211: Calling CRDA to update world regulatory domain Oct 5 17:54:56 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: completed -> disconnected Oct 5 17:54:56 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:54:57 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:54:57 taoseeker kernel: [ 2177.749763] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:54:57 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:54:57 taoseeker wpa_supplicant[1011]: wlan2: Trying to associate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:54:57 taoseeker kernel: [ 2177.760961] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:54:57 taoseeker kernel: [ 2177.763516] wlan2: authenticated Oct 5 17:54:57 taoseeker kernel: [ 2177.767553] wlan2: associating with AP with corrupt beacon Oct 5 17:54:57 taoseeker kernel: [ 2177.768683] wlan2: associate with 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:54:57 taoseeker kernel: [ 2177.771177] wlan2: RX AssocResp from 50:67:f0:d3:ed:c4 (capab=0xc11 status=0 aid=1) Oct 5 17:54:57 taoseeker kernel: [ 2177.771672] wlan2: associated Oct 5 17:54:57 taoseeker kernel: [ 2177.772321] cfg80211: Pending regulatory request, waiting for it to be processed... Oct 5 17:54:57 taoseeker wpa_supplicant[1011]: wlan2: Associated with 50:67:f0:d3:ed:c4 Oct 5 17:54:57 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> associating Oct 5 17:54:57 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associating -> associated Oct 5 17:54:58 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associated -> 4-way handshake Oct 5 17:54:58 taoseeker wpa_supplicant[1011]: wlan2: WPA: Key negotiation completed with 50:67:f0:d3:ed:c4 [PTK=CCMP GTK=CCMP] Oct 5 17:54:58 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-CONNECTED - Connection to 50:67:f0:d3:ed:c4 completed (reauth) [id=0 id_str=] Oct 5 17:54:58 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: 4-way handshake -> completed Oct 5 17:55:31 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-DISCONNECTED bssid=50:67:f0:d3:ed:c4 reason=4 Oct 5 17:55:31 taoseeker kernel: [ 2211.487992] ieee80211 phy0: >wlan2: No probe response from AP 50:67:f0:d3:ed:c4 after 500ms, disconnecting. Oct 5 17:55:31 taoseeker kernel: [ 2211.492672] cfg80211: All devices are disconnected, going to restore regulatory settings Oct 5 17:55:31 taoseeker kernel: [ 2211.492690] cfg80211: Restoring regulatory settings Oct 5 17:55:31 taoseeker kernel: [ 2211.492706] cfg80211: Calling CRDA for country: NO Oct 5 17:55:31 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: completed -> disconnected Oct 5 17:55:31 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:55:32 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:55:32 taoseeker kernel: [ 2212.745166] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:55:32 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:55:32 taoseeker wpa_supplicant[1011]: wlan2: Trying to associate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:55:32 taoseeker kernel: [ 2212.756316] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:55:32 taoseeker kernel: [ 2212.758242] wlan2: authenticated Oct 5 17:55:32 taoseeker kernel: [ 2212.761044] wlan2: associating with AP with corrupt beacon Oct 5 17:55:32 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> associating Oct 5 17:55:32 taoseeker kernel: [ 2212.764020] wlan2: associate with 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:55:32 taoseeker kernel: [ 2212.767990] wlan2: RX AssocResp from 50:67:f0:d3:ed:c4 (capab=0xc11 status=0 aid=1) Oct 5 17:55:32 taoseeker kernel: [ 2212.768482] wlan2: associated Oct 5 17:55:32 taoseeker wpa_supplicant[1011]: wlan2: Associated with 50:67:f0:d3:ed:c4 Oct 5 17:55:32 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associating -> associated Oct 5 17:55:33 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associated -> 4-way handshake Oct 5 17:55:33 taoseeker wpa_supplicant[1011]: wlan2: WPA: Key negotiation completed with 50:67:f0:d3:ed:c4 [PTK=CCMP GTK=CCMP] Oct 5 17:55:33 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-CONNECTED - Connection to 50:67:f0:d3:ed:c4 completed (reauth) [id=0 id_str=] Oct 5 17:55:33 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: 4-way handshake -> completed Oct 5 17:56:19 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-DISCONNECTED bssid=50:67:f0:d3:ed:c4 reason=4 Oct 5 17:56:19 taoseeker kernel: [ 2259.487128] ieee80211 phy0: >wlan2: No probe response from AP 50:67:f0:d3:ed:c4 after 500ms, disconnecting. Oct 5 17:56:19 taoseeker kernel: [ 2259.491177] cfg80211: All devices are disconnected, going to restore regulatory settings Oct 5 17:56:19 taoseeker kernel: [ 2259.491194] cfg80211: Restoring regulatory settings Oct 5 17:56:19 taoseeker kernel: [ 2259.491211] cfg80211: Calling CRDA to update world regulatory domain Oct 5 17:56:19 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: completed -> disconnected Oct 5 17:56:19 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:56:20 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:56:20 taoseeker kernel: [ 2260.744252] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:56:20 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:56:20 taoseeker kernel: [ 2260.755449] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:56:20 taoseeker wpa_supplicant[1011]: wlan2: Trying to associate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:56:20 taoseeker kernel: [ 2260.763942] wlan2: authenticated Oct 5 17:56:20 taoseeker kernel: [ 2260.764493] wlan2: associating with AP with corrupt beacon Oct 5 17:56:20 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> associating Oct 5 17:56:20 taoseeker kernel: [ 2260.767365] wlan2: associate with 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:56:20 taoseeker wpa_supplicant[1011]: wlan2: Associated with 50:67:f0:d3:ed:c4 Oct 5 17:56:20 taoseeker kernel: [ 2260.775283] wlan2: RX AssocResp from 50:67:f0:d3:ed:c4 (capab=0xc11 status=0 aid=1) Oct 5 17:56:20 taoseeker kernel: [ 2260.775785] wlan2: associated Oct 5 17:56:20 taoseeker kernel: [ 2260.778245] cfg80211: Pending regulatory request, waiting for it to be processed... Oct 5 17:56:20 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associating -> associated Oct 5 17:56:21 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associated -> 4-way handshake Oct 5 17:56:21 taoseeker wpa_supplicant[1011]: wlan2: WPA: Key negotiation completed with 50:67:f0:d3:ed:c4 [PTK=CCMP GTK=CCMP] Oct 5 17:56:21 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-CONNECTED - Connection to 50:67:f0:d3:ed:c4 completed (reauth) [id=0 id_str=] Oct 5 17:56:21 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: 4-way handshake -> completed Oct 5 17:56:36 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-DISCONNECTED bssid=50:67:f0:d3:ed:c4 reason=4 Oct 5 17:56:36 taoseeker kernel: [ 2276.490830] ieee80211 phy0: >wlan2: No probe response from AP 50:67:f0:d3:ed:c4 after 500ms, disconnecting. Oct 5 17:56:36 taoseeker kernel: [ 2276.492860] cfg80211: All devices are disconnected, going to restore regulatory settings Oct 5 17:56:36 taoseeker kernel: [ 2276.492876] cfg80211: Restoring regulatory settings Oct 5 17:56:36 taoseeker kernel: [ 2276.492891] cfg80211: Calling CRDA to update world regulatory domain Oct 5 17:56:36 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: completed -> disconnected Oct 5 17:56:36 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:56:37 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:56:37 taoseeker kernel: [ 2277.747936] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:56:37 taoseeker kernel: [ 2277.759171] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:56:37 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:56:37 taoseeker wpa_supplicant[1011]: wlan2: Trying to associate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:56:37 taoseeker kernel: [ 2277.763268] wlan2: authenticated Oct 5 17:56:37 taoseeker kernel: [ 2277.765614] wlan2: associating with AP with corrupt beacon Oct 5 17:56:37 taoseeker kernel: [ 2277.766836] wlan2: associate with 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:56:37 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> associating Oct 5 17:56:37 taoseeker kernel: [ 2277.970795] wlan2: associate with 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:56:37 taoseeker NetworkManager[800]: (wlan2): roamed from BSSID 50:67:F0:D3:ED:C4 (Telenor6904ett) to (none) ((none)) Oct 5 17:56:38 taoseeker kernel: [ 2278.174790] wlan2: associate with 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 17:56:38 taoseeker kernel: [ 2278.378781] wlan2: association with 50:67:f0:d3:ed:c4 timed out Oct 5 17:56:38 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associating -> disconnected Oct 5 17:56:38 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:56:39 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:56:39 taoseeker kernel: [ 2279.639874] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:56:39 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:56:39 taoseeker kernel: [ 2279.647141] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:56:39 taoseeker kernel: [ 2279.850759] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:56:39 taoseeker wpa_supplicant[1011]: wlan2: Trying to associate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:56:39 taoseeker kernel: [ 2280.054754] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 17:56:39 taoseeker kernel: [ 2280.056218] wlan2: authenticated Oct 5 17:56:39 taoseeker kernel: [ 2280.056797] wlan2: associating with AP with corrupt beacon Oct 5 17:56:39 taoseeker kernel: [ 2280.058800] wlan2: associate with 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:56:39 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> associating Oct 5 17:56:40 taoseeker kernel: [ 2280.262755] wlan2: associate with 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:56:40 taoseeker kernel: [ 2280.466743] wlan2: associate with 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 17:56:40 taoseeker kernel: [ 2280.670747] wlan2: association with 50:67:f0:d3:ed:c4 timed out Oct 5 17:56:40 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associating -> disconnected Oct 5 17:56:40 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:56:41 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:56:41 taoseeker kernel: [ 2281.930501] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:56:41 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:56:41 taoseeker kernel: [ 2281.939205] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:56:42 taoseeker kernel: [ 2282.142730] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:56:42 taoseeker kernel: [ 2282.346715] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 17:56:42 taoseeker kernel: [ 2282.550703] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 17:56:42 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 17:56:42 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:56:43 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:56:43 taoseeker kernel: [ 2283.831938] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:56:43 taoseeker kernel: [ 2283.843061] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:56:43 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:56:43 taoseeker wpa_supplicant[1011]: wlan2: Trying to associate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:56:43 taoseeker kernel: [ 2284.046694] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:56:43 taoseeker kernel: [ 2284.050017] wlan2: authenticated Oct 5 17:56:43 taoseeker kernel: [ 2284.051515] wlan2: associating with AP with corrupt beacon Oct 5 17:56:43 taoseeker kernel: [ 2284.054708] wlan2: associate with 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:56:43 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> associating Oct 5 17:56:44 taoseeker kernel: [ 2284.258688] wlan2: associate with 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:56:44 taoseeker kernel: [ 2284.262557] wlan2: RX AssocResp from 50:67:f0:d3:ed:c4 (capab=0xc11 status=0 aid=1) Oct 5 17:56:44 taoseeker wpa_supplicant[1011]: wlan2: Associated with 50:67:f0:d3:ed:c4 Oct 5 17:56:44 taoseeker kernel: [ 2284.270720] wlan2: associated Oct 5 17:56:44 taoseeker kernel: [ 2284.271386] cfg80211: Pending regulatory request, waiting for it to be processed... Oct 5 17:56:44 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associating -> associated Oct 5 17:56:45 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associated -> 4-way handshake Oct 5 17:56:46 taoseeker wpa_supplicant[1011]: wlan2: WPA: Key negotiation completed with 50:67:f0:d3:ed:c4 [PTK=CCMP GTK=CCMP] Oct 5 17:56:46 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-CONNECTED - Connection to 50:67:f0:d3:ed:c4 completed (reauth) [id=0 id_str=] Oct 5 17:56:46 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: 4-way handshake -> completed Oct 5 17:56:49 taoseeker kernel: [ 2289.352133] wlan2: deauthenticated from 50:67:f0:d3:ed:c4 (Reason: 15) Oct 5 17:56:49 taoseeker kernel: [ 2289.353424] cfg80211: All devices are disconnected, going to restore regulatory settings Oct 5 17:56:49 taoseeker kernel: [ 2289.353436] cfg80211: Restoring regulatory settings Oct 5 17:56:49 taoseeker kernel: [ 2289.353451] cfg80211: Calling CRDA for country: NO Oct 5 17:56:49 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-DISCONNECTED bssid=50:67:f0:d3:ed:c4 reason=15 Oct 5 17:56:49 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: completed -> disconnected Oct 5 17:56:49 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:56:50 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:56:50 taoseeker kernel: [ 2290.612080] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:56:50 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:56:50 taoseeker kernel: [ 2290.622946] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:56:50 taoseeker wpa_supplicant[1011]: wlan2: Trying to associate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:56:50 taoseeker kernel: [ 2290.630003] wlan2: authenticated Oct 5 17:56:50 taoseeker kernel: [ 2290.630608] wlan2: associating with AP with corrupt beacon Oct 5 17:56:50 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> associating Oct 5 17:56:50 taoseeker kernel: [ 2290.634597] wlan2: associate with 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:56:50 taoseeker wpa_supplicant[1011]: wlan2: Associated with 50:67:f0:d3:ed:c4 Oct 5 17:56:50 taoseeker kernel: [ 2290.643914] wlan2: RX AssocResp from 50:67:f0:d3:ed:c4 (capab=0xc11 status=0 aid=1) Oct 5 17:56:50 taoseeker kernel: [ 2290.644408] wlan2: associated Oct 5 17:56:50 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associating -> associated Oct 5 17:56:51 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associated -> 4-way handshake Oct 5 17:56:51 taoseeker wpa_supplicant[1011]: wlan2: WPA: Key negotiation completed with 50:67:f0:d3:ed:c4 [PTK=CCMP GTK=CCMP] Oct 5 17:56:51 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-CONNECTED - Connection to 50:67:f0:d3:ed:c4 completed (reauth) [id=0 id_str=] Oct 5 17:56:51 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: 4-way handshake -> completed Oct 5 17:56:55 taoseeker NetworkManager[800]: (wlan2): roamed from BSSID (none) ((none)) to 50:67:F0:D3:ED:C4 (Telenor6904ett) Oct 5 17:57:06 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-DISCONNECTED bssid=50:67:f0:d3:ed:c4 reason=4 Oct 5 17:57:06 taoseeker kernel: [ 2306.490325] ieee80211 phy0: >wlan2: No probe response from AP 50:67:f0:d3:ed:c4 after 500ms, disconnecting. Oct 5 17:57:06 taoseeker kernel: [ 2306.491576] cfg80211: All devices are disconnected, going to restore regulatory settings Oct 5 17:57:06 taoseeker kernel: [ 2306.491589] cfg80211: Restoring regulatory settings Oct 5 17:57:06 taoseeker kernel: [ 2306.491603] cfg80211: Calling CRDA to update world regulatory domain Oct 5 17:57:06 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: completed -> disconnected Oct 5 17:57:06 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:57:07 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:57:07 taoseeker kernel: [ 2307.751442] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:57:07 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:57:07 taoseeker kernel: [ 2307.762628] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:57:07 taoseeker wpa_supplicant[1011]: wlan2: Trying to associate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:57:07 taoseeker kernel: [ 2307.770799] wlan2: authenticated Oct 5 17:57:07 taoseeker kernel: [ 2307.771948] wlan2: associating with AP with corrupt beacon Oct 5 17:57:07 taoseeker kernel: [ 2307.774613] wlan2: associate with 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:57:07 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> associating Oct 5 17:57:07 taoseeker kernel: [ 2307.785396] wlan2: RX AssocResp from 50:67:f0:d3:ed:c4 (capab=0xc11 status=0 aid=1) Oct 5 17:57:07 taoseeker kernel: [ 2307.785898] wlan2: associated Oct 5 17:57:07 taoseeker wpa_supplicant[1011]: wlan2: Associated with 50:67:f0:d3:ed:c4 Oct 5 17:57:07 taoseeker kernel: [ 2307.788761] cfg80211: Pending regulatory request, waiting for it to be processed... Oct 5 17:57:07 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associating -> associated Oct 5 17:57:08 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associated -> 4-way handshake Oct 5 17:57:08 taoseeker wpa_supplicant[1011]: wlan2: WPA: Key negotiation completed with 50:67:f0:d3:ed:c4 [PTK=CCMP GTK=CCMP] Oct 5 17:57:08 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-CONNECTED - Connection to 50:67:f0:d3:ed:c4 completed (reauth) [id=0 id_str=] Oct 5 17:57:08 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: 4-way handshake -> completed Oct 5 17:57:11 taoseeker kernel: [ 2311.362126] wlan2: deauthenticated from 50:67:f0:d3:ed:c4 (Reason: 15) Oct 5 17:57:11 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-DISCONNECTED bssid=50:67:f0:d3:ed:c4 reason=15 Oct 5 17:57:11 taoseeker kernel: [ 2311.363862] cfg80211: All devices are disconnected, going to restore regulatory settings Oct 5 17:57:11 taoseeker kernel: [ 2311.363878] cfg80211: Restoring regulatory settings Oct 5 17:57:11 taoseeker kernel: [ 2311.363893] cfg80211: Calling CRDA for country: NO Oct 5 17:57:11 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: completed -> disconnected Oct 5 17:57:11 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:57:12 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:57:12 taoseeker kernel: [ 2312.625219] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:57:12 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:57:12 taoseeker kernel: [ 2312.634569] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:57:12 taoseeker kernel: [ 2312.636103] wlan2: authenticated Oct 5 17:57:12 taoseeker wpa_supplicant[1011]: wlan2: Trying to associate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:57:12 taoseeker kernel: [ 2312.640918] wlan2: associating with AP with corrupt beacon Oct 5 17:57:12 taoseeker kernel: [ 2312.642264] wlan2: associate with 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:57:12 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> associating Oct 5 17:57:12 taoseeker kernel: [ 2312.846202] wlan2: associate with 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:57:12 taoseeker wpa_supplicant[1011]: wlan2: Associated with 50:67:f0:d3:ed:c4 Oct 5 17:57:12 taoseeker kernel: [ 2312.851501] wlan2: RX AssocResp from 50:67:f0:d3:ed:c4 (capab=0xc11 status=0 aid=1) Oct 5 17:57:12 taoseeker kernel: [ 2312.852001] wlan2: associated Oct 5 17:57:12 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associating -> associated Oct 5 17:57:13 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associated -> 4-way handshake Oct 5 17:57:15 taoseeker wpa_supplicant[1011]: wlan2: WPA: Key negotiation completed with 50:67:f0:d3:ed:c4 [PTK=CCMP GTK=CCMP] Oct 5 17:57:15 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-CONNECTED - Connection to 50:67:f0:d3:ed:c4 completed (reauth) [id=0 id_str=] Oct 5 17:57:15 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: 4-way handshake -> completed Oct 5 17:57:19 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-DISCONNECTED bssid=50:67:f0:d3:ed:c4 reason=4 Oct 5 17:57:19 taoseeker kernel: [ 2319.486103] ieee80211 phy0: >wlan2: No probe response from AP 50:67:f0:d3:ed:c4 after 500ms, disconnecting. Oct 5 17:57:19 taoseeker kernel: [ 2319.487379] cfg80211: All devices are disconnected, going to restore regulatory settings Oct 5 17:57:19 taoseeker kernel: [ 2319.487392] cfg80211: Restoring regulatory settings Oct 5 17:57:19 taoseeker kernel: [ 2319.487406] cfg80211: Calling CRDA to update world regulatory domain Oct 5 17:57:19 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: completed -> disconnected Oct 5 17:57:19 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:57:20 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:57:20 taoseeker kernel: [ 2320.747320] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:57:20 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:57:20 taoseeker kernel: [ 2320.758430] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:57:20 taoseeker wpa_supplicant[1011]: wlan2: Trying to associate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:57:20 taoseeker kernel: [ 2320.762775] wlan2: authenticated Oct 5 17:57:20 taoseeker kernel: [ 2320.764246] wlan2: associating with AP with corrupt beacon Oct 5 17:57:20 taoseeker kernel: [ 2320.766421] wlan2: associate with 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:57:20 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> associating Oct 5 17:57:20 taoseeker kernel: [ 2320.771821] wlan2: RX AssocResp from 50:67:f0:d3:ed:c4 (capab=0xc11 status=0 aid=1) Oct 5 17:57:20 taoseeker kernel: [ 2320.772324] wlan2: associated Oct 5 17:57:20 taoseeker kernel: [ 2320.774029] cfg80211: Pending regulatory request, waiting for it to be processed... Oct 5 17:57:20 taoseeker wpa_supplicant[1011]: wlan2: Associated with 50:67:f0:d3:ed:c4 Oct 5 17:57:20 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associating -> associated Oct 5 17:57:21 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associated -> 4-way handshake Oct 5 17:57:21 taoseeker wpa_supplicant[1011]: wlan2: WPA: Key negotiation completed with 50:67:f0:d3:ed:c4 [PTK=CCMP GTK=CCMP] Oct 5 17:57:21 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-CONNECTED - Connection to 50:67:f0:d3:ed:c4 completed (reauth) [id=0 id_str=] Oct 5 17:57:21 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: 4-way handshake -> completed Oct 5 17:57:30 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-DISCONNECTED bssid=50:67:f0:d3:ed:c4 reason=4 Oct 5 17:57:30 taoseeker kernel: [ 2330.485933] ieee80211 phy0: >wlan2: No probe response from AP 50:67:f0:d3:ed:c4 after 500ms, disconnecting. Oct 5 17:57:30 taoseeker kernel: [ 2330.487220] cfg80211: All devices are disconnected, going to restore regulatory settings Oct 5 17:57:30 taoseeker kernel: [ 2330.487233] cfg80211: Restoring regulatory settings Oct 5 17:57:30 taoseeker kernel: [ 2330.487248] cfg80211: Calling CRDA to update world regulatory domain Oct 5 17:57:30 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: completed -> disconnected Oct 5 17:57:30 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:57:31 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:57:31 taoseeker kernel: [ 2331.748924] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:57:31 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:57:31 taoseeker kernel: [ 2331.758241] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:57:31 taoseeker kernel: [ 2331.759780] wlan2: authenticated Oct 5 17:57:31 taoseeker wpa_supplicant[1011]: wlan2: Trying to associate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:57:31 taoseeker kernel: [ 2331.764811] wlan2: associating with AP with corrupt beacon Oct 5 17:57:31 taoseeker kernel: [ 2331.766039] wlan2: associate with 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:57:31 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> associating Oct 5 17:57:31 taoseeker kernel: [ 2331.772936] wlan2: RX AssocResp from 50:67:f0:d3:ed:c4 (capab=0xc11 status=0 aid=1) Oct 5 17:57:31 taoseeker kernel: [ 2331.773441] wlan2: associated Oct 5 17:57:31 taoseeker kernel: [ 2331.774188] cfg80211: Pending regulatory request, waiting for it to be processed... Oct 5 17:57:31 taoseeker wpa_supplicant[1011]: wlan2: Associated with 50:67:f0:d3:ed:c4 Oct 5 17:57:31 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associating -> associated Oct 5 17:57:32 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associated -> 4-way handshake Oct 5 17:57:32 taoseeker wpa_supplicant[1011]: wlan2: WPA: Key negotiation completed with 50:67:f0:d3:ed:c4 [PTK=CCMP GTK=CCMP] Oct 5 17:57:32 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-CONNECTED - Connection to 50:67:f0:d3:ed:c4 completed (reauth) [id=0 id_str=] Oct 5 17:57:32 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: 4-way handshake -> completed Oct 5 17:57:46 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-DISCONNECTED bssid=50:67:f0:d3:ed:c4 reason=4 Oct 5 17:57:46 taoseeker kernel: [ 2346.485674] ieee80211 phy0: >wlan2: No probe response from AP 50:67:f0:d3:ed:c4 after 500ms, disconnecting. Oct 5 17:57:46 taoseeker kernel: [ 2346.487711] cfg80211: All devices are disconnected, going to restore regulatory settings Oct 5 17:57:46 taoseeker kernel: [ 2346.487727] cfg80211: Restoring regulatory settings Oct 5 17:57:46 taoseeker kernel: [ 2346.487744] cfg80211: Calling CRDA for country: NO Oct 5 17:57:46 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: completed -> disconnected Oct 5 17:57:46 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:57:47 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:57:47 taoseeker kernel: [ 2347.750846] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:57:47 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:57:47 taoseeker kernel: [ 2347.761996] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:57:47 taoseeker kernel: [ 2347.764013] wlan2: authenticated Oct 5 17:57:47 taoseeker wpa_supplicant[1011]: wlan2: Trying to associate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:57:47 taoseeker kernel: [ 2347.769287] wlan2: associating with AP with corrupt beacon Oct 5 17:57:47 taoseeker kernel: [ 2347.769670] wlan2: associate with 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:57:47 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> associating Oct 5 17:57:47 taoseeker kernel: [ 2347.773686] wlan2: RX AssocResp from 50:67:f0:d3:ed:c4 (capab=0xc11 status=0 aid=1) Oct 5 17:57:47 taoseeker kernel: [ 2347.774160] wlan2: associated Oct 5 17:57:47 taoseeker wpa_supplicant[1011]: wlan2: Associated with 50:67:f0:d3:ed:c4 Oct 5 17:57:47 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associating -> associated Oct 5 17:57:48 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associated -> 4-way handshake Oct 5 17:57:48 taoseeker wpa_supplicant[1011]: wlan2: WPA: Key negotiation completed with 50:67:f0:d3:ed:c4 [PTK=CCMP GTK=CCMP] Oct 5 17:57:48 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-CONNECTED - Connection to 50:67:f0:d3:ed:c4 completed (reauth) [id=0 id_str=] Oct 5 17:57:48 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: 4-way handshake -> completed Oct 5 17:57:55 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-DISCONNECTED bssid=50:67:f0:d3:ed:c4 reason=4 Oct 5 17:57:55 taoseeker kernel: [ 2355.485534] ieee80211 phy0: >wlan2: No probe response from AP 50:67:f0:d3:ed:c4 after 500ms, disconnecting. Oct 5 17:57:55 taoseeker kernel: [ 2355.490175] cfg80211: All devices are disconnected, going to restore regulatory settings Oct 5 17:57:55 taoseeker kernel: [ 2355.490192] cfg80211: Restoring regulatory settings Oct 5 17:57:55 taoseeker kernel: [ 2355.490206] cfg80211: Calling CRDA to update world regulatory domain Oct 5 17:57:55 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: completed -> disconnected Oct 5 17:57:55 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:57:56 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:57:56 taoseeker kernel: [ 2356.742684] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:57:56 taoseeker kernel: [ 2356.753846] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:57:56 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:57:56 taoseeker kernel: [ 2356.957476] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:57:57 taoseeker wpa_supplicant[1011]: wlan2: Trying to associate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:57:57 taoseeker kernel: [ 2357.161474] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 17:57:57 taoseeker kernel: [ 2357.162991] wlan2: authenticated Oct 5 17:57:57 taoseeker kernel: [ 2357.164561] wlan2: associating with AP with corrupt beacon Oct 5 17:57:57 taoseeker kernel: [ 2357.165508] wlan2: associate with 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:57:57 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> associating Oct 5 17:57:57 taoseeker kernel: [ 2357.172588] wlan2: RX AssocResp from 50:67:f0:d3:ed:c4 (capab=0xc11 status=0 aid=1) Oct 5 17:57:57 taoseeker kernel: [ 2357.173092] wlan2: associated Oct 5 17:57:57 taoseeker kernel: [ 2357.173789] cfg80211: Pending regulatory request, waiting for it to be processed... Oct 5 17:57:57 taoseeker wpa_supplicant[1011]: wlan2: Associated with 50:67:f0:d3:ed:c4 Oct 5 17:57:57 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associating -> associated Oct 5 17:57:57 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associated -> 4-way handshake Oct 5 17:57:58 taoseeker wpa_supplicant[1011]: wlan2: WPA: Key negotiation completed with 50:67:f0:d3:ed:c4 [PTK=CCMP GTK=CCMP] Oct 5 17:57:58 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-CONNECTED - Connection to 50:67:f0:d3:ed:c4 completed (reauth) [id=0 id_str=] Oct 5 17:57:58 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: 4-way handshake -> completed Oct 5 17:58:03 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-DISCONNECTED bssid=50:67:f0:d3:ed:c4 reason=4 Oct 5 17:58:03 taoseeker kernel: [ 2363.485395] ieee80211 phy0: >wlan2: No probe response from AP 50:67:f0:d3:ed:c4 after 500ms, disconnecting. Oct 5 17:58:03 taoseeker kernel: [ 2363.487363] cfg80211: All devices are disconnected, going to restore regulatory settings Oct 5 17:58:03 taoseeker kernel: [ 2363.487379] cfg80211: Restoring regulatory settings Oct 5 17:58:03 taoseeker kernel: [ 2363.487396] cfg80211: Calling CRDA for country: NO Oct 5 17:58:03 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: completed -> disconnected Oct 5 17:58:03 taoseeker wpa_supplicant[1011]: wlan2: Failed to initiate AP scan Oct 5 17:58:04 taoseeker wpa_supplicant[1011]: wlan2: Failed to initiate AP scan Oct 5 17:58:05 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:58:05 taoseeker kernel: [ 2365.142512] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:58:05 taoseeker kernel: [ 2365.153709] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:58:05 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> authenticating Oct 5 17:58:05 taoseeker kernel: [ 2365.357343] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:58:05 taoseeker wpa_supplicant[1011]: wlan2: Trying to associate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:58:05 taoseeker kernel: [ 2365.361694] wlan2: authenticated Oct 5 17:58:05 taoseeker kernel: [ 2365.362970] wlan2: associating with AP with corrupt beacon Oct 5 17:58:05 taoseeker kernel: [ 2365.365674] wlan2: associate with 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:58:05 taoseeker kernel: [ 2365.368573] wlan2: RX AssocResp from 50:67:f0:d3:ed:c4 (capab=0xc11 status=0 aid=1) Oct 5 17:58:05 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> associating Oct 5 17:58:05 taoseeker wpa_supplicant[1011]: wlan2: Associated with 50:67:f0:d3:ed:c4 Oct 5 17:58:05 taoseeker kernel: [ 2365.373592] wlan2: associated Oct 5 17:58:05 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associating -> associated Oct 5 17:58:06 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associated -> 4-way handshake Oct 5 17:58:06 taoseeker wpa_supplicant[1011]: wlan2: WPA: Key negotiation completed with 50:67:f0:d3:ed:c4 [PTK=CCMP GTK=CCMP] Oct 5 17:58:06 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-CONNECTED - Connection to 50:67:f0:d3:ed:c4 completed (reauth) [id=0 id_str=] Oct 5 17:58:06 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: 4-way handshake -> completed Oct 5 17:58:22 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-DISCONNECTED bssid=50:67:f0:d3:ed:c4 reason=4 Oct 5 17:58:22 taoseeker kernel: [ 2382.489078] ieee80211 phy0: >wlan2: No probe response from AP 50:67:f0:d3:ed:c4 after 500ms, disconnecting. Oct 5 17:58:22 taoseeker kernel: [ 2382.492274] cfg80211: All devices are disconnected, going to restore regulatory settings Oct 5 17:58:22 taoseeker kernel: [ 2382.492291] cfg80211: Restoring regulatory settings Oct 5 17:58:22 taoseeker kernel: [ 2382.492305] cfg80211: Calling CRDA to update world regulatory domain Oct 5 17:58:22 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: completed -> disconnected Oct 5 17:58:22 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:58:23 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:58:23 taoseeker kernel: [ 2383.754269] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:58:23 taoseeker kernel: [ 2383.765427] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:58:23 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:58:23 taoseeker wpa_supplicant[1011]: wlan2: Trying to associate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:58:23 taoseeker kernel: [ 2383.969044] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:58:23 taoseeker kernel: [ 2383.972405] wlan2: authenticated Oct 5 17:58:23 taoseeker kernel: [ 2383.973809] wlan2: associating with AP with corrupt beacon Oct 5 17:58:23 taoseeker kernel: [ 2383.977066] wlan2: associate with 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:58:23 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> associating Oct 5 17:58:24 taoseeker kernel: [ 2384.181042] wlan2: associate with 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:58:24 taoseeker kernel: [ 2384.385037] wlan2: associate with 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 17:58:24 taoseeker kernel: [ 2384.589023] wlan2: association with 50:67:f0:d3:ed:c4 timed out Oct 5 17:58:24 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associating -> disconnected Oct 5 17:58:24 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:58:25 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:58:25 taoseeker kernel: [ 2385.846175] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:58:25 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:58:25 taoseeker kernel: [ 2385.857373] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:58:25 taoseeker NetworkManager[800]: (wlan2): roamed from BSSID 50:67:F0:D3:ED:C4 (Telenor6904ett) to (none) ((none)) Oct 5 17:58:25 taoseeker kernel: [ 2386.061018] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:58:26 taoseeker wpa_supplicant[1011]: wlan2: Trying to associate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:58:26 taoseeker kernel: [ 2386.265010] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 17:58:26 taoseeker kernel: [ 2386.268333] wlan2: authenticated Oct 5 17:58:26 taoseeker kernel: [ 2386.268889] wlan2: associating with AP with corrupt beacon Oct 5 17:58:26 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> associating Oct 5 17:58:26 taoseeker kernel: [ 2386.273294] wlan2: associate with 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:58:26 taoseeker kernel: [ 2386.477002] wlan2: associate with 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:58:26 taoseeker kernel: [ 2386.680998] wlan2: associate with 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 17:58:26 taoseeker kernel: [ 2386.884990] wlan2: association with 50:67:f0:d3:ed:c4 timed out Oct 5 17:58:26 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associating -> disconnected Oct 5 17:58:26 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:58:28 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:58:28 taoseeker kernel: [ 2388.142161] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:58:28 taoseeker kernel: [ 2388.153351] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:58:28 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:58:28 taoseeker kernel: [ 2388.356990] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:58:28 taoseeker kernel: [ 2388.560987] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 17:58:28 taoseeker kernel: [ 2388.764961] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 17:58:28 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 17:58:28 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:58:29 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:58:29 taoseeker kernel: [ 2390.024182] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:58:29 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:58:29 taoseeker kernel: [ 2390.033292] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:58:30 taoseeker kernel: [ 2390.236948] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:58:30 taoseeker wpa_supplicant[1011]: wlan2: Trying to associate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:58:30 taoseeker kernel: [ 2390.440933] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 17:58:30 taoseeker kernel: [ 2390.443395] wlan2: authenticated Oct 5 17:58:30 taoseeker kernel: [ 2390.443964] wlan2: associating with AP with corrupt beacon Oct 5 17:58:30 taoseeker kernel: [ 2390.444978] wlan2: associate with 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:58:30 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> associating Oct 5 17:58:30 taoseeker kernel: [ 2390.451820] wlan2: RX AssocResp from 50:67:f0:d3:ed:c4 (capab=0xc11 status=0 aid=1) Oct 5 17:58:30 taoseeker kernel: [ 2390.452332] wlan2: associated Oct 5 17:58:30 taoseeker kernel: [ 2390.453032] cfg80211: Pending regulatory request, waiting for it to be processed... Oct 5 17:58:30 taoseeker wpa_supplicant[1011]: wlan2: Associated with 50:67:f0:d3:ed:c4 Oct 5 17:58:30 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associating -> associated Oct 5 17:58:31 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associated -> 4-way handshake Oct 5 17:58:31 taoseeker wpa_supplicant[1011]: wlan2: WPA: Key negotiation completed with 50:67:f0:d3:ed:c4 [PTK=CCMP GTK=CCMP] Oct 5 17:58:31 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-CONNECTED - Connection to 50:67:f0:d3:ed:c4 completed (reauth) [id=0 id_str=] Oct 5 17:58:31 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: 4-way handshake -> completed Oct 5 17:58:31 taoseeker NetworkManager[800]: (wlan2): roamed from BSSID (none) ((none)) to 50:67:F0:D3:ED:C4 (Telenor6904ett) Oct 5 17:58:35 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-DISCONNECTED bssid=50:67:f0:d3:ed:c4 reason=4 Oct 5 17:58:35 taoseeker kernel: [ 2395.484892] ieee80211 phy0: >wlan2: No probe response from AP 50:67:f0:d3:ed:c4 after 500ms, disconnecting. Oct 5 17:58:35 taoseeker kernel: [ 2395.486897] cfg80211: All devices are disconnected, going to restore regulatory settings Oct 5 17:58:35 taoseeker kernel: [ 2395.486913] cfg80211: Restoring regulatory settings Oct 5 17:58:35 taoseeker kernel: [ 2395.486928] cfg80211: Calling CRDA to update world regulatory domain Oct 5 17:58:35 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: completed -> disconnected Oct 5 17:58:35 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:58:36 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:58:36 taoseeker kernel: [ 2396.743858] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:58:36 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:58:36 taoseeker kernel: [ 2396.753196] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:58:36 taoseeker kernel: [ 2396.956843] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:58:37 taoseeker wpa_supplicant[1011]: wlan2: Trying to associate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:58:37 taoseeker kernel: [ 2397.160839] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 17:58:37 taoseeker kernel: [ 2397.162305] wlan2: authenticated Oct 5 17:58:37 taoseeker kernel: [ 2397.162920] wlan2: associating with AP with corrupt beacon Oct 5 17:58:37 taoseeker kernel: [ 2397.164876] wlan2: associate with 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:58:37 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> associating Oct 5 17:58:37 taoseeker kernel: [ 2397.368835] wlan2: associate with 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:58:37 taoseeker kernel: [ 2397.572822] wlan2: associate with 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 17:58:37 taoseeker kernel: [ 2397.776818] wlan2: association with 50:67:f0:d3:ed:c4 timed out Oct 5 17:58:37 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associating -> disconnected Oct 5 17:58:37 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:58:38 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:58:38 taoseeker kernel: [ 2399.036098] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:58:38 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:58:38 taoseeker kernel: [ 2399.045158] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:58:39 taoseeker kernel: [ 2399.248801] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:58:39 taoseeker kernel: [ 2399.452797] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 17:58:39 taoseeker kernel: [ 2399.656786] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 17:58:39 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 17:58:39 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:58:40 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:58:40 taoseeker kernel: [ 2400.913943] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:58:40 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:58:40 taoseeker kernel: [ 2400.932996] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:58:41 taoseeker kernel: [ 2401.136779] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:58:41 taoseeker kernel: [ 2401.340765] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 17:58:41 taoseeker kernel: [ 2401.544755] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 17:58:41 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 17:58:41 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:58:42 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:58:42 taoseeker kernel: [ 2402.803905] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:58:42 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:58:42 taoseeker kernel: [ 2402.813132] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:58:42 taoseeker kernel: [ 2403.016745] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:58:43 taoseeker kernel: [ 2403.220740] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 17:58:43 taoseeker kernel: [ 2403.424731] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 17:58:43 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 17:58:43 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:58:44 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:58:44 taoseeker kernel: [ 2404.689899] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:58:44 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:58:44 taoseeker kernel: [ 2404.701068] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:58:44 taoseeker kernel: [ 2404.904709] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:58:45 taoseeker kernel: [ 2405.108710] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 17:58:45 taoseeker kernel: [ 2405.312698] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 17:58:45 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 17:58:45 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:58:46 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:58:46 taoseeker kernel: [ 2406.569856] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:58:46 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:58:46 taoseeker kernel: [ 2406.581039] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:58:46 taoseeker kernel: [ 2406.784680] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:58:46 taoseeker kernel: [ 2406.988686] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 17:58:47 taoseeker kernel: [ 2407.192672] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 17:58:47 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 17:58:47 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:58:48 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:58:48 taoseeker kernel: [ 2408.451654] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:58:48 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:58:48 taoseeker kernel: [ 2408.461010] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:58:48 taoseeker kernel: [ 2408.464513] wlan2: authenticated Oct 5 17:58:48 taoseeker wpa_supplicant[1011]: wlan2: Trying to associate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:58:48 taoseeker kernel: [ 2408.468450] wlan2: associating with AP with corrupt beacon Oct 5 17:58:48 taoseeker kernel: [ 2408.468710] wlan2: associate with 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:58:48 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> associating Oct 5 17:58:48 taoseeker kernel: [ 2408.672654] wlan2: associate with 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:58:48 taoseeker kernel: [ 2408.876646] wlan2: associate with 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 17:58:48 taoseeker kernel: [ 2409.080645] wlan2: association with 50:67:f0:d3:ed:c4 timed out Oct 5 17:58:48 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associating -> disconnected Oct 5 17:58:49 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:58:50 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:58:50 taoseeker kernel: [ 2410.338105] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:58:50 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:58:50 taoseeker kernel: [ 2410.349009] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:58:50 taoseeker kernel: [ 2410.552625] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:58:50 taoseeker kernel: [ 2410.756618] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 17:58:50 taoseeker kernel: [ 2410.960756] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 17:58:50 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 17:58:50 taoseeker NetworkManager[800]: (wlan2): link timed out. Oct 5 17:58:50 taoseeker NetworkManager[800]: (wlan2): device state change: activated -> failed (reason 'supplicant-timeout') [100 120 11] Oct 5 17:58:50 taoseeker NetworkManager[800]: Activation (wlan2) failed for connection 'Telenor6904ett' Oct 5 17:58:51 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:58:51 taoseeker NetworkManager[800]: (wlan2): device state change: failed -> disconnected (reason 'none') [120 30 0] Oct 5 17:58:51 taoseeker NetworkManager[800]: (wlan2): deactivating device (reason 'none') [0] Oct 5 17:58:51 taoseeker NetworkManager[800]: (wlan2): canceled DHCP transaction, DHCP client pid 1851 Oct 5 17:58:51 taoseeker kernel: [ 2411.121153] IPv6: ADDRCONF(NETDEV_UP): wlan2: link is not ready Oct 5 17:58:51 taoseeker NetworkManager[800]: DNS: plugin dnsmasq update failed Oct 5 17:58:51 taoseeker NetworkManager[800]: ((null)): removing resolv.conf from /sbin/resolvconf Oct 5 17:58:51 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> disconnected Oct 5 17:58:53 taoseeker NetworkManager[800]: Auto-activating connection 'Telenor6904ett'. Oct 5 17:58:53 taoseeker NetworkManager[800]: Activation (wlan2) starting connection 'Telenor6904ett' Oct 5 17:58:53 taoseeker NetworkManager[800]: (wlan2): device state change: disconnected -> prepare (reason 'none') [30 40 0] Oct 5 17:58:53 taoseeker NetworkManager[800]: Activation (wlan2) Stage 1 of 5 (Device Prepare) scheduled... Oct 5 17:58:53 taoseeker NetworkManager[800]: Activation (wlan2) Stage 1 of 5 (Device Prepare) started... Oct 5 17:58:53 taoseeker NetworkManager[800]: Activation (wlan2) Stage 2 of 5 (Device Configure) scheduled... Oct 5 17:58:53 taoseeker NetworkManager[800]: Activation (wlan2) Stage 1 of 5 (Device Prepare) complete. Oct 5 17:58:53 taoseeker NetworkManager[800]: Activation (wlan2) Stage 2 of 5 (Device Configure) starting... Oct 5 17:58:53 taoseeker NetworkManager[800]: (wlan2): device state change: prepare -> config (reason 'none') [40 50 0] Oct 5 17:58:53 taoseeker NetworkManager[800]: Activation (wlan2/wireless): access point 'Telenor6904ett' has security, but secrets are required. Oct 5 17:58:53 taoseeker NetworkManager[800]: (wlan2): device state change: config -> need-auth (reason 'none') [50 60 0] Oct 5 17:58:53 taoseeker NetworkManager[800]: Activation (wlan2) Stage 2 of 5 (Device Configure) complete. Oct 5 17:58:53 taoseeker NetworkManager[800]: Activation (wlan2) Stage 1 of 5 (Device Prepare) scheduled... Oct 5 17:58:53 taoseeker NetworkManager[800]: Activation (wlan2) Stage 1 of 5 (Device Prepare) started... Oct 5 17:58:53 taoseeker NetworkManager[800]: (wlan2): device state change: need-auth -> prepare (reason 'none') [60 40 0] Oct 5 17:58:53 taoseeker NetworkManager[800]: Activation (wlan2) Stage 2 of 5 (Device Configure) scheduled... Oct 5 17:58:53 taoseeker NetworkManager[800]: Activation (wlan2) Stage 1 of 5 (Device Prepare) complete. Oct 5 17:58:53 taoseeker NetworkManager[800]: Activation (wlan2) Stage 2 of 5 (Device Configure) starting... Oct 5 17:58:53 taoseeker NetworkManager[800]: (wlan2): device state change: prepare -> config (reason 'none') [40 50 0] Oct 5 17:58:53 taoseeker NetworkManager[800]: Activation (wlan2/wireless): connection 'Telenor6904ett' has security, and secrets exist. No new secrets needed. Oct 5 17:58:53 taoseeker NetworkManager[800]: Config: added 'ssid' value 'Telenor6904ett' Oct 5 17:58:53 taoseeker NetworkManager[800]: Config: added 'scan_ssid' value '1' Oct 5 17:58:53 taoseeker NetworkManager[800]: Config: added 'key_mgmt' value 'WPA-PSK' Oct 5 17:58:53 taoseeker NetworkManager[800]: Config: added 'auth_alg' value 'OPEN' Oct 5 17:58:53 taoseeker NetworkManager[800]: Config: added 'psk' value '' Oct 5 17:58:53 taoseeker NetworkManager[800]: Activation (wlan2) Stage 2 of 5 (Device Configure) complete. Oct 5 17:58:53 taoseeker NetworkManager[800]: Config: set interface ap_scan to 1 Oct 5 17:58:54 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:58:55 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:58:55 taoseeker kernel: [ 2415.247570] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:58:55 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:58:55 taoseeker kernel: [ 2415.256911] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:58:55 taoseeker kernel: [ 2415.460552] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:58:55 taoseeker kernel: [ 2415.664546] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 17:58:55 taoseeker kernel: [ 2415.868541] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 17:58:55 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 17:58:55 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:58:57 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:58:57 taoseeker kernel: [ 2417.125736] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:58:57 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:58:57 taoseeker kernel: [ 2417.136886] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:58:57 taoseeker kernel: [ 2417.340525] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 17:58:57 taoseeker kernel: [ 2417.544517] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 17:58:57 taoseeker kernel: [ 2417.748507] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 17:58:57 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 17:58:57 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 17:58:58 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:58:58 taoseeker kernel: [ 2419.005716] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 17:58:58 taoseeker wpa_supplicant[1011]: wlan2: Trying to associate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 17:58:58 taoseeker kernel: [ 2419.016850] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:58:58 taoseeker kernel: [ 2419.018535] wlan2: authenticated Oct 5 17:58:58 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 17:58:58 taoseeker kernel: [ 2419.022279] wlan2: associating with AP with corrupt beacon Oct 5 17:58:58 taoseeker kernel: [ 2419.024559] wlan2: associate with 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 17:58:58 taoseeker kernel: [ 2419.027056] wlan2: RX AssocResp from 50:67:f0:d3:ed:c4 (capab=0xc11 status=0 aid=1) Oct 5 17:58:58 taoseeker kernel: [ 2419.027565] wlan2: associated Oct 5 17:58:58 taoseeker kernel: [ 2419.028146] IPv6: ADDRCONF(NETDEV_CHANGE): wlan2: link becomes ready Oct 5 17:58:58 taoseeker kernel: [ 2419.028342] cfg80211: Pending regulatory request, waiting for it to be processed... Oct 5 17:58:58 taoseeker wpa_supplicant[1011]: wlan2: Associated with 50:67:f0:d3:ed:c4 Oct 5 17:58:58 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> associating Oct 5 17:58:58 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associating -> associated Oct 5 17:58:59 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associated -> 4-way handshake Oct 5 17:58:59 taoseeker wpa_supplicant[1011]: wlan2: WPA: Key negotiation completed with 50:67:f0:d3:ed:c4 [PTK=CCMP GTK=CCMP] Oct 5 17:58:59 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-CONNECTED - Connection to 50:67:f0:d3:ed:c4 completed (reauth) [id=0 id_str=] Oct 5 17:58:59 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: 4-way handshake -> completed Oct 5 17:58:59 taoseeker NetworkManager[800]: Activation (wlan2/wireless) Stage 2 of 5 (Device Configure) successful. Connected to wireless network 'Telenor6904ett'. Oct 5 17:58:59 taoseeker NetworkManager[800]: Activation (wlan2) Stage 3 of 5 (IP Configure Start) scheduled. Oct 5 17:58:59 taoseeker NetworkManager[800]: Activation (wlan2) Stage 3 of 5 (IP Configure Start) started... Oct 5 17:58:59 taoseeker NetworkManager[800]: (wlan2): device state change: config -> ip-config (reason 'none') [50 70 0] Oct 5 17:58:59 taoseeker NetworkManager[800]: Activation (wlan2) Beginning DHCPv4 transaction (timeout in 45 seconds) Oct 5 17:58:59 taoseeker NetworkManager[800]: dhclient started with pid 2047 Oct 5 17:58:59 taoseeker NetworkManager[800]: Activation (wlan2) Beginning IP6 addrconf. Oct 5 17:58:59 taoseeker NetworkManager[800]: Activation (wlan2) Stage 3 of 5 (IP Configure Start) complete. Oct 5 17:58:59 taoseeker dhclient: Internet Systems Consortium DHCP Client 4.2.4 Oct 5 17:58:59 taoseeker dhclient: Copyright 2004-2012 Internet Systems Consortium. Oct 5 17:58:59 taoseeker dhclient: All rights reserved. Oct 5 17:58:59 taoseeker dhclient: For info, please visit https://www.isc.org/software/dhcp/ Oct 5 17:58:59 taoseeker dhclient: Oct 5 17:58:59 taoseeker dhclient: Listening on LPF/wlan2/00:14:51:81:6a:17 Oct 5 17:58:59 taoseeker dhclient: Sending on LPF/wlan2/00:14:51:81:6a:17 Oct 5 17:58:59 taoseeker dhclient: Sending on Socket/fallback Oct 5 17:58:59 taoseeker dhclient: DHCPREQUEST of 10.0.0.66 on wlan2 to 255.255.255.255 port 67 Oct 5 17:58:59 taoseeker NetworkManager[800]: (wlan2): DHCPv4 state changed nbi -> preinit Oct 5 17:58:59 taoseeker dhclient: DHCPACK of 10.0.0.66 from 10.0.0.138 Oct 5 17:58:59 taoseeker dhclient: bound to 10.0.0.66 -- renewal in 32854 seconds. Oct 5 17:58:59 taoseeker NetworkManager[800]: (wlan2): DHCPv4 state changed preinit -> reboot Oct 5 17:58:59 taoseeker NetworkManager[800]: address 10.0.0.66 Oct 5 17:58:59 taoseeker NetworkManager[800]: prefix 24 (255.255.255.0) Oct 5 17:58:59 taoseeker NetworkManager[800]: gateway 10.0.0.138 Oct 5 17:58:59 taoseeker NetworkManager[800]: hostname 'taoseeker' Oct 5 17:58:59 taoseeker NetworkManager[800]: nameserver '130.67.15.198' Oct 5 17:58:59 taoseeker NetworkManager[800]: nameserver '193.213.112.4' Oct 5 17:58:59 taoseeker NetworkManager[800]: nameserver '10.0.0.138' Oct 5 17:58:59 taoseeker NetworkManager[800]: domain name 'lan' Oct 5 17:58:59 taoseeker NetworkManager[800]: Activation (wlan2) Stage 5 of 5 (IPv4 Configure Commit) scheduled... Oct 5 17:58:59 taoseeker NetworkManager[800]: Activation (wlan2) Stage 5 of 5 (IPv4 Commit) started... Oct 5 17:59:00 taoseeker NetworkManager[800]: (wlan2): device state change: ip-config -> activated (reason 'none') [70 100 0] Oct 5 17:59:00 taoseeker NetworkManager[800]: ((null)): writing resolv.conf to /sbin/resolvconf Oct 5 17:59:01 taoseeker NetworkManager[800]: Policy set 'Telenor6904ett' (wlan2) as default for IPv4 routing and DNS. Oct 5 17:59:01 taoseeker NetworkManager[800]: Activation (wlan2) successful, device activated. Oct 5 17:59:01 taoseeker NetworkManager[800]: Activation (wlan2) Stage 5 of 5 (IPv4 Commit) complete. Oct 5 17:59:19 taoseeker NetworkManager[800]: (wlan2): IP6 addrconf timed out or failed. Oct 5 17:59:19 taoseeker NetworkManager[800]: Activation (wlan2) Stage 4 of 5 (IPv6 Configure Timeout) scheduled... Oct 5 17:59:19 taoseeker NetworkManager[800]: Activation (wlan2) Stage 4 of 5 (IPv6 Configure Timeout) started... Oct 5 17:59:19 taoseeker NetworkManager[800]: Activation (wlan2) Stage 4 of 5 (IPv6 Configure Timeout) complete. Oct 5 18:03:19 taoseeker NetworkManager[800]: nl_recvmsgs() error: (-33) Dump inconsistency detected, interrupted Oct 5 18:05:19 taoseeker NetworkManager[800]: nl_recvmsgs() error: (-33) Dump inconsistency detected, interrupted Oct 5 18:06:51 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-DISCONNECTED bssid=50:67:f0:d3:ed:c4 reason=3 Oct 5 18:06:51 taoseeker kernel: [ 2891.352277] wlan2: deauthenticated from 50:67:f0:d3:ed:c4 (Reason: 3) Oct 5 18:06:51 taoseeker kernel: [ 2891.356354] cfg80211: All devices are disconnected, going to restore regulatory settings Oct 5 18:06:51 taoseeker kernel: [ 2891.356372] cfg80211: Restoring regulatory settings Oct 5 18:06:51 taoseeker kernel: [ 2891.356390] cfg80211: Calling CRDA for country: NO Oct 5 18:06:51 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: completed -> disconnected Oct 5 18:06:51 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 18:06:52 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 18:06:52 taoseeker kernel: [ 2892.608723] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 18:06:52 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 18:06:52 taoseeker kernel: [ 2892.619860] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 18:06:52 taoseeker kernel: [ 2892.823505] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 18:06:54 taoseeker kernel: [ 2894.151603] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 18:06:54 taoseeker kernel: [ 2894.355475] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 18:06:54 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 18:06:54 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 18:06:55 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 18:06:55 taoseeker kernel: [ 2895.612712] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 18:06:55 taoseeker kernel: [ 2895.623819] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 18:06:55 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 18:06:55 taoseeker wpa_supplicant[1011]: wlan2: Trying to associate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 18:06:55 taoseeker kernel: [ 2895.827457] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 18:06:55 taoseeker kernel: [ 2895.830856] wlan2: authenticated Oct 5 18:06:55 taoseeker kernel: [ 2895.832566] wlan2: associating with AP with corrupt beacon Oct 5 18:06:55 taoseeker kernel: [ 2895.835486] wlan2: associate with 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 18:06:55 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> associating Oct 5 18:06:55 taoseeker kernel: [ 2895.842299] wlan2: RX AssocResp from 50:67:f0:d3:ed:c4 (capab=0xc11 status=0 aid=1) Oct 5 18:06:55 taoseeker kernel: [ 2895.842866] wlan2: associated Oct 5 18:06:55 taoseeker wpa_supplicant[1011]: wlan2: Associated with 50:67:f0:d3:ed:c4 Oct 5 18:06:55 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associating -> associated Oct 5 18:06:56 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associated -> 4-way handshake Oct 5 18:06:56 taoseeker wpa_supplicant[1011]: wlan2: WPA: Key negotiation completed with 50:67:f0:d3:ed:c4 [PTK=CCMP GTK=CCMP] Oct 5 18:06:56 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-CONNECTED - Connection to 50:67:f0:d3:ed:c4 completed (reauth) [id=0 id_str=] Oct 5 18:06:56 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: 4-way handshake -> completed Oct 5 18:07:43 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-DISCONNECTED bssid=50:67:f0:d3:ed:c4 reason=4 Oct 5 18:07:43 taoseeker kernel: [ 2943.482730] ieee80211 phy0: >wlan2: No probe response from AP 50:67:f0:d3:ed:c4 after 500ms, disconnecting. Oct 5 18:07:43 taoseeker kernel: [ 2943.491860] cfg80211: All devices are disconnected, going to restore regulatory settings Oct 5 18:07:43 taoseeker kernel: [ 2943.491879] cfg80211: Restoring regulatory settings Oct 5 18:07:43 taoseeker kernel: [ 2943.491897] cfg80211: Calling CRDA to update world regulatory domain Oct 5 18:07:43 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: completed -> disconnected Oct 5 18:07:43 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 18:07:44 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 18:07:44 taoseeker kernel: [ 2944.739866] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 18:07:44 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 18:07:44 taoseeker kernel: [ 2944.751054] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 18:07:44 taoseeker kernel: [ 2944.954700] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 18:07:45 taoseeker kernel: [ 2945.158684] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 18:07:45 taoseeker kernel: [ 2945.362675] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 18:07:45 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 18:07:45 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 18:07:46 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 18:07:46 taoseeker kernel: [ 2946.619863] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 18:07:46 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 18:07:46 taoseeker kernel: [ 2946.631030] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 18:07:46 taoseeker kernel: [ 2946.834663] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 18:07:46 taoseeker kernel: [ 2947.038660] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 18:07:47 taoseeker kernel: [ 2947.242653] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 18:07:47 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 18:07:47 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 18:07:48 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 18:07:48 taoseeker kernel: [ 2948.500134] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 18:07:48 taoseeker kernel: [ 2948.511699] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 18:07:48 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 18:07:48 taoseeker kernel: [ 2948.714654] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 18:07:48 taoseeker kernel: [ 2948.918630] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 18:07:49 taoseeker kernel: [ 2949.122634] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 18:07:49 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 18:07:49 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 18:07:50 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 18:07:50 taoseeker kernel: [ 2950.379766] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 18:07:50 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 18:07:50 taoseeker kernel: [ 2950.390998] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 18:07:50 taoseeker kernel: [ 2950.594612] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 18:07:50 taoseeker kernel: [ 2950.798602] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 18:07:50 taoseeker kernel: [ 2951.002592] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 18:07:50 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 18:07:51 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 18:07:52 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 18:07:52 taoseeker kernel: [ 2952.259783] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 18:07:52 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 18:07:52 taoseeker kernel: [ 2952.270940] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 18:07:52 taoseeker kernel: [ 2952.474576] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 18:07:52 taoseeker kernel: [ 2952.678575] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 18:07:52 taoseeker kernel: [ 2952.882562] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 18:07:52 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 18:07:52 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 18:07:54 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 18:07:54 taoseeker kernel: [ 2954.139851] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 18:07:54 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 18:07:54 taoseeker kernel: [ 2954.150914] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 18:07:54 taoseeker kernel: [ 2954.354552] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 18:07:54 taoseeker kernel: [ 2954.558538] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 18:07:54 taoseeker kernel: [ 2954.762538] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 18:07:54 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 18:07:54 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 18:07:55 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 18:07:55 taoseeker kernel: [ 2956.019710] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 18:07:55 taoseeker kernel: [ 2956.030886] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 18:07:55 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 18:07:56 taoseeker kernel: [ 2956.234528] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 18:07:56 taoseeker kernel: [ 2956.438511] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 18:07:56 taoseeker kernel: [ 2956.642501] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 18:07:56 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 18:07:56 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 18:07:57 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 18:07:57 taoseeker kernel: [ 2957.899673] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 18:07:57 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 18:07:57 taoseeker kernel: [ 2957.910860] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 18:07:58 taoseeker kernel: [ 2958.114492] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 18:07:58 taoseeker kernel: [ 2958.318491] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 18:07:58 taoseeker kernel: [ 2958.522477] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 18:07:58 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 18:07:58 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 18:07:58 taoseeker NetworkManager[800]: (wlan2): link timed out. Oct 5 18:07:58 taoseeker NetworkManager[800]: (wlan2): device state change: activated -> failed (reason 'supplicant-timeout') [100 120 11] Oct 5 18:07:59 taoseeker NetworkManager[800]: Activation (wlan2) failed for connection 'Telenor6904ett' Oct 5 18:07:59 taoseeker NetworkManager[800]: (wlan2): device state change: failed -> disconnected (reason 'none') [120 30 0] Oct 5 18:07:59 taoseeker NetworkManager[800]: (wlan2): deactivating device (reason 'none') [0] Oct 5 18:07:59 taoseeker NetworkManager[800]: (wlan2): canceled DHCP transaction, DHCP client pid 2047 Oct 5 18:07:59 taoseeker kernel: [ 2959.135009] IPv6: ADDRCONF(NETDEV_UP): wlan2: link is not ready Oct 5 18:07:59 taoseeker NetworkManager[800]: DNS: plugin dnsmasq update failed Oct 5 18:07:59 taoseeker NetworkManager[800]: ((null)): removing resolv.conf from /sbin/resolvconf Oct 5 18:07:59 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> disconnected Oct 5 18:08:01 taoseeker NetworkManager[800]: Auto-activating connection 'Telenor6904ett'. Oct 5 18:08:01 taoseeker NetworkManager[800]: Activation (wlan2) starting connection 'Telenor6904ett' Oct 5 18:08:01 taoseeker NetworkManager[800]: (wlan2): device state change: disconnected -> prepare (reason 'none') [30 40 0] Oct 5 18:08:01 taoseeker NetworkManager[800]: Activation (wlan2) Stage 1 of 5 (Device Prepare) scheduled... Oct 5 18:08:01 taoseeker NetworkManager[800]: Activation (wlan2) Stage 1 of 5 (Device Prepare) started... Oct 5 18:08:01 taoseeker NetworkManager[800]: Activation (wlan2) Stage 2 of 5 (Device Configure) scheduled... Oct 5 18:08:01 taoseeker NetworkManager[800]: Activation (wlan2) Stage 1 of 5 (Device Prepare) complete. Oct 5 18:08:01 taoseeker NetworkManager[800]: Activation (wlan2) Stage 2 of 5 (Device Configure) starting... Oct 5 18:08:01 taoseeker NetworkManager[800]: (wlan2): device state change: prepare -> config (reason 'none') [40 50 0] Oct 5 18:08:01 taoseeker NetworkManager[800]: Activation (wlan2/wireless): access point 'Telenor6904ett' has security, but secrets are required. Oct 5 18:08:01 taoseeker NetworkManager[800]: (wlan2): device state change: config -> need-auth (reason 'none') [50 60 0] Oct 5 18:08:01 taoseeker NetworkManager[800]: Activation (wlan2) Stage 2 of 5 (Device Configure) complete. Oct 5 18:08:01 taoseeker NetworkManager[800]: Activation (wlan2) Stage 1 of 5 (Device Prepare) scheduled... Oct 5 18:08:01 taoseeker NetworkManager[800]: Activation (wlan2) Stage 1 of 5 (Device Prepare) started... Oct 5 18:08:01 taoseeker NetworkManager[800]: (wlan2): device state change: need-auth -> prepare (reason 'none') [60 40 0] Oct 5 18:08:01 taoseeker NetworkManager[800]: Activation (wlan2) Stage 2 of 5 (Device Configure) scheduled... Oct 5 18:08:01 taoseeker NetworkManager[800]: Activation (wlan2) Stage 1 of 5 (Device Prepare) complete. Oct 5 18:08:01 taoseeker NetworkManager[800]: Activation (wlan2) Stage 2 of 5 (Device Configure) starting... Oct 5 18:08:01 taoseeker NetworkManager[800]: (wlan2): device state change: prepare -> config (reason 'none') [40 50 0] Oct 5 18:08:01 taoseeker NetworkManager[800]: Activation (wlan2/wireless): connection 'Telenor6904ett' has security, and secrets exist. No new secrets needed. Oct 5 18:08:01 taoseeker NetworkManager[800]: Config: added 'ssid' value 'Telenor6904ett' Oct 5 18:08:01 taoseeker NetworkManager[800]: Config: added 'scan_ssid' value '1' Oct 5 18:08:01 taoseeker NetworkManager[800]: Config: added 'key_mgmt' value 'WPA-PSK' Oct 5 18:08:01 taoseeker NetworkManager[800]: Config: added 'auth_alg' value 'OPEN' Oct 5 18:08:01 taoseeker NetworkManager[800]: Config: added 'psk' value '' Oct 5 18:08:01 taoseeker NetworkManager[800]: Activation (wlan2) Stage 2 of 5 (Device Configure) complete. Oct 5 18:08:01 taoseeker NetworkManager[800]: Config: set interface ap_scan to 1 Oct 5 18:08:02 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 18:08:03 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 18:08:03 taoseeker kernel: [ 2963.239671] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 18:08:03 taoseeker kernel: [ 2963.250763] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 18:08:03 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 18:08:03 taoseeker kernel: [ 2963.454413] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 18:08:03 taoseeker kernel: [ 2963.658413] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 18:08:03 taoseeker kernel: [ 2963.862403] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 18:08:03 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 18:08:03 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 18:08:05 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 18:08:05 taoseeker kernel: [ 2965.119661] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 18:08:05 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 18:08:05 taoseeker kernel: [ 2965.130726] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 18:08:05 taoseeker kernel: [ 2965.334502] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 18:08:05 taoseeker wpa_supplicant[1011]: wlan2: Trying to associate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 18:08:05 taoseeker kernel: [ 2965.338626] wlan2: authenticated Oct 5 18:08:05 taoseeker kernel: [ 2965.339273] wlan2: associating with AP with corrupt beacon Oct 5 18:08:05 taoseeker kernel: [ 2965.342415] wlan2: associate with 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 18:08:05 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> associating Oct 5 18:08:05 taoseeker kernel: [ 2965.347820] wlan2: RX AssocResp from 50:67:f0:d3:ed:c4 (capab=0xc11 status=0 aid=1) Oct 5 18:08:05 taoseeker kernel: [ 2965.348311] wlan2: associated Oct 5 18:08:05 taoseeker kernel: [ 2965.348890] IPv6: ADDRCONF(NETDEV_CHANGE): wlan2: link becomes ready Oct 5 18:08:05 taoseeker kernel: [ 2965.349086] cfg80211: Pending regulatory request, waiting for it to be processed... Oct 5 18:08:05 taoseeker wpa_supplicant[1011]: wlan2: Associated with 50:67:f0:d3:ed:c4 Oct 5 18:08:05 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associating -> associated Oct 5 18:08:05 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associated -> 4-way handshake Oct 5 18:08:11 taoseeker wpa_supplicant[1011]: wlan2: WPA: 4-Way Handshake failed - pre-shared key may be incorrect Oct 5 18:08:11 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-DISCONNECTED bssid=50:67:f0:d3:ed:c4 reason=4 Oct 5 18:08:11 taoseeker kernel: [ 2971.482330] ieee80211 phy0: >wlan2: No probe response from AP 50:67:f0:d3:ed:c4 after 500ms, disconnecting. Oct 5 18:08:11 taoseeker kernel: [ 2971.484275] cfg80211: All devices are disconnected, going to restore regulatory settings Oct 5 18:08:11 taoseeker kernel: [ 2971.484291] cfg80211: Restoring regulatory settings Oct 5 18:08:11 taoseeker kernel: [ 2971.484306] cfg80211: Calling CRDA to update world regulatory domain Oct 5 18:08:11 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: 4-way handshake -> disconnected Oct 5 18:08:11 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 18:08:12 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 18:08:12 taoseeker kernel: [ 2972.739504] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 18:08:12 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 18:08:12 taoseeker kernel: [ 2972.750635] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 18:08:12 taoseeker kernel: [ 2972.752385] wlan2: authenticated Oct 5 18:08:12 taoseeker wpa_supplicant[1011]: wlan2: Trying to associate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 18:08:12 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> associating Oct 5 18:08:12 taoseeker kernel: [ 2972.762350] wlan2: associating with AP with corrupt beacon Oct 5 18:08:12 taoseeker kernel: [ 2972.766547] wlan2: associate with 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 18:08:12 taoseeker kernel: [ 2972.970270] wlan2: associate with 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 18:08:13 taoseeker kernel: [ 2973.174264] wlan2: associate with 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 18:08:13 taoseeker kernel: [ 2973.176731] wlan2: RX AssocResp from 50:67:f0:d3:ed:c4 (capab=0xc11 status=0 aid=1) Oct 5 18:08:13 taoseeker kernel: [ 2973.177192] wlan2: associated Oct 5 18:08:13 taoseeker kernel: [ 2973.177841] cfg80211: Pending regulatory request, waiting for it to be processed... Oct 5 18:08:13 taoseeker wpa_supplicant[1011]: wlan2: Associated with 50:67:f0:d3:ed:c4 Oct 5 18:08:13 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associating -> associated Oct 5 18:08:13 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associated -> 4-way handshake Oct 5 18:08:13 taoseeker wpa_supplicant[1011]: wlan2: WPA: Key negotiation completed with 50:67:f0:d3:ed:c4 [PTK=CCMP GTK=CCMP] Oct 5 18:08:13 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-CONNECTED - Connection to 50:67:f0:d3:ed:c4 completed (reauth) [id=0 id_str=] Oct 5 18:08:13 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: 4-way handshake -> completed Oct 5 18:08:13 taoseeker NetworkManager[800]: Activation (wlan2/wireless) Stage 2 of 5 (Device Configure) successful. Connected to wireless network 'Telenor6904ett'. Oct 5 18:08:13 taoseeker NetworkManager[800]: Activation (wlan2) Stage 3 of 5 (IP Configure Start) scheduled. Oct 5 18:08:13 taoseeker NetworkManager[800]: Activation (wlan2) Stage 3 of 5 (IP Configure Start) started... Oct 5 18:08:13 taoseeker NetworkManager[800]: (wlan2): device state change: config -> ip-config (reason 'none') [50 70 0] Oct 5 18:08:13 taoseeker NetworkManager[800]: Activation (wlan2) Beginning DHCPv4 transaction (timeout in 45 seconds) Oct 5 18:08:13 taoseeker NetworkManager[800]: dhclient started with pid 2277 Oct 5 18:08:13 taoseeker NetworkManager[800]: Activation (wlan2) Beginning IP6 addrconf. Oct 5 18:08:13 taoseeker NetworkManager[800]: Activation (wlan2) Stage 3 of 5 (IP Configure Start) complete. Oct 5 18:08:13 taoseeker dhclient: Internet Systems Consortium DHCP Client 4.2.4 Oct 5 18:08:13 taoseeker dhclient: Copyright 2004-2012 Internet Systems Consortium. Oct 5 18:08:13 taoseeker dhclient: All rights reserved. Oct 5 18:08:13 taoseeker dhclient: For info, please visit https://www.isc.org/software/dhcp/ Oct 5 18:08:13 taoseeker dhclient: Oct 5 18:08:14 taoseeker dhclient: Listening on LPF/wlan2/00:14:51:81:6a:17 Oct 5 18:08:14 taoseeker dhclient: Sending on LPF/wlan2/00:14:51:81:6a:17 Oct 5 18:08:14 taoseeker dhclient: Sending on Socket/fallback Oct 5 18:08:14 taoseeker dhclient: DHCPREQUEST of 10.0.0.66 on wlan2 to 255.255.255.255 port 67 Oct 5 18:08:14 taoseeker NetworkManager[800]: (wlan2): DHCPv4 state changed nbi -> preinit Oct 5 18:08:16 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-DISCONNECTED bssid=50:67:f0:d3:ed:c4 reason=15 Oct 5 18:08:16 taoseeker kernel: [ 2977.012043] wlan2: deauthenticated from 50:67:f0:d3:ed:c4 (Reason: 15) Oct 5 18:08:16 taoseeker kernel: [ 2977.014893] cfg80211: All devices are disconnected, going to restore regulatory settings Oct 5 18:08:16 taoseeker kernel: [ 2977.014906] cfg80211: Restoring regulatory settings Oct 5 18:08:16 taoseeker kernel: [ 2977.014922] cfg80211: Calling CRDA for country: NO Oct 5 18:08:16 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: completed -> disconnected Oct 5 18:08:17 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 18:08:17 taoseeker dhclient: DHCPREQUEST of 10.0.0.66 on wlan2 to 255.255.255.255 port 67 Oct 5 18:08:18 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 18:08:18 taoseeker kernel: [ 2978.267543] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 18:08:18 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 18:08:18 taoseeker kernel: [ 2978.278548] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 18:08:18 taoseeker kernel: [ 2978.282662] wlan2: authenticated Oct 5 18:08:18 taoseeker wpa_supplicant[1011]: wlan2: Trying to associate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 18:08:18 taoseeker kernel: [ 2978.286773] wlan2: associating with AP with corrupt beacon Oct 5 18:08:18 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> associating Oct 5 18:08:18 taoseeker kernel: [ 2978.290521] wlan2: associate with 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 18:08:18 taoseeker kernel: [ 2978.494243] wlan2: associate with 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 18:08:18 taoseeker kernel: [ 2978.698186] wlan2: associate with 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 18:08:18 taoseeker kernel: [ 2978.902237] wlan2: association with 50:67:f0:d3:ed:c4 timed out Oct 5 18:08:18 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associating -> disconnected Oct 5 18:08:18 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 18:08:20 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 18:08:20 taoseeker kernel: [ 2980.159419] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 18:08:20 taoseeker kernel: [ 2980.170519] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 18:08:20 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 18:08:20 taoseeker wpa_supplicant[1011]: wlan2: Trying to associate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 18:08:20 taoseeker kernel: [ 2980.374158] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 18:08:20 taoseeker kernel: [ 2980.375630] wlan2: authenticated Oct 5 18:08:20 taoseeker kernel: [ 2980.376185] wlan2: associating with AP with corrupt beacon Oct 5 18:08:20 taoseeker kernel: [ 2980.378192] wlan2: associate with 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 18:08:20 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> associating Oct 5 18:08:20 taoseeker kernel: [ 2980.385418] wlan2: RX AssocResp from 50:67:f0:d3:ed:c4 (capab=0xc11 status=0 aid=1) Oct 5 18:08:20 taoseeker kernel: [ 2980.385916] wlan2: associated Oct 5 18:08:20 taoseeker wpa_supplicant[1011]: wlan2: Associated with 50:67:f0:d3:ed:c4 Oct 5 18:08:20 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associating -> associated Oct 5 18:08:20 taoseeker dhclient: DHCPREQUEST of 10.0.0.66 on wlan2 to 255.255.255.255 port 67 Oct 5 18:08:21 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associated -> 4-way handshake Oct 5 18:08:22 taoseeker wpa_supplicant[1011]: wlan2: WPA: Key negotiation completed with 50:67:f0:d3:ed:c4 [PTK=CCMP GTK=CCMP] Oct 5 18:08:22 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-CONNECTED - Connection to 50:67:f0:d3:ed:c4 completed (reauth) [id=0 id_str=] Oct 5 18:08:22 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: 4-way handshake -> completed Oct 5 18:08:23 taoseeker dhclient: DHCPREQUEST of 10.0.0.66 on wlan2 to 255.255.255.255 port 67 Oct 5 18:08:25 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-DISCONNECTED bssid=50:67:f0:d3:ed:c4 reason=15 Oct 5 18:08:25 taoseeker kernel: [ 2985.371969] wlan2: deauthenticated from 50:67:f0:d3:ed:c4 (Reason: 15) Oct 5 18:08:25 taoseeker kernel: [ 2985.374659] cfg80211: All devices are disconnected, going to restore regulatory settings Oct 5 18:08:25 taoseeker kernel: [ 2985.374673] cfg80211: Restoring regulatory settings Oct 5 18:08:25 taoseeker kernel: [ 2985.374688] cfg80211: Calling CRDA to update world regulatory domain Oct 5 18:08:25 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: completed -> disconnected Oct 5 18:08:25 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 18:08:26 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 18:08:26 taoseeker kernel: [ 2986.631356] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 18:08:26 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 18:08:26 taoseeker kernel: [ 2986.642442] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 18:08:26 taoseeker kernel: [ 2986.846061] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 18:08:26 taoseeker kernel: [ 2987.050059] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 18:08:27 taoseeker kernel: [ 2987.254053] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 18:08:27 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 18:08:27 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 18:08:28 taoseeker dhclient: DHCPDISCOVER on wlan2 to 255.255.255.255 port 67 interval 3 Oct 5 18:08:28 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 18:08:28 taoseeker kernel: [ 2988.511218] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 18:08:28 taoseeker kernel: [ 2988.522406] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 18:08:28 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 18:08:28 taoseeker kernel: [ 2988.726034] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 18:08:28 taoseeker kernel: [ 2988.930030] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 18:08:29 taoseeker kernel: [ 2989.134022] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 18:08:29 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 18:08:29 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 18:08:30 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 18:08:30 taoseeker kernel: [ 2990.391191] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 18:08:30 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 18:08:30 taoseeker kernel: [ 2990.402370] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 18:08:30 taoseeker kernel: [ 2990.606006] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 18:08:30 taoseeker kernel: [ 2990.810004] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 18:08:30 taoseeker kernel: [ 2991.013994] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 18:08:30 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 18:08:31 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 18:08:31 taoseeker dhclient: DHCPDISCOVER on wlan2 to 255.255.255.255 port 67 interval 5 Oct 5 18:08:32 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 18:08:32 taoseeker kernel: [ 2992.271228] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 18:08:32 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 18:08:32 taoseeker kernel: [ 2992.290229] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 18:08:32 taoseeker kernel: [ 2992.493979] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 18:08:32 taoseeker kernel: [ 2992.698031] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 18:08:32 taoseeker kernel: [ 2992.901968] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 18:08:32 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 18:08:32 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 18:08:33 taoseeker NetworkManager[800]: (wlan2): IP6 addrconf timed out or failed. Oct 5 18:08:33 taoseeker NetworkManager[800]: Activation (wlan2) Stage 4 of 5 (IPv6 Configure Timeout) scheduled... Oct 5 18:08:33 taoseeker NetworkManager[800]: Activation (wlan2) Stage 4 of 5 (IPv6 Configure Timeout) started... Oct 5 18:08:33 taoseeker NetworkManager[800]: Activation (wlan2) Stage 4 of 5 (IPv6 Configure Timeout) complete. Oct 5 18:08:34 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 18:08:34 taoseeker kernel: [ 2994.159137] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 18:08:34 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 18:08:34 taoseeker kernel: [ 2994.170309] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 18:08:34 taoseeker kernel: [ 2994.373950] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 18:08:34 taoseeker kernel: [ 2994.577948] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 18:08:34 taoseeker kernel: [ 2994.781941] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 18:08:34 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 18:08:34 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 18:08:35 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 18:08:35 taoseeker kernel: [ 2996.039256] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 18:08:35 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 18:08:35 taoseeker kernel: [ 2996.050282] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 18:08:36 taoseeker kernel: [ 2996.253977] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 18:08:36 taoseeker dhclient: DHCPDISCOVER on wlan2 to 255.255.255.255 port 67 interval 9 Oct 5 18:08:36 taoseeker kernel: [ 2996.457915] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 18:08:36 taoseeker kernel: [ 2996.662045] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 18:08:36 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 18:08:36 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 18:08:37 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 18:08:37 taoseeker kernel: [ 2997.919084] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 18:08:37 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 18:08:37 taoseeker kernel: [ 2997.930281] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 18:08:38 taoseeker kernel: [ 2998.133893] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 18:08:38 taoseeker kernel: [ 2998.337888] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 18:08:38 taoseeker kernel: [ 2998.541881] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 18:08:38 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 18:08:38 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 18:08:39 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 18:08:39 taoseeker kernel: [ 2999.807065] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 18:08:39 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 18:08:39 taoseeker kernel: [ 2999.818305] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 18:08:39 taoseeker kernel: [ 3000.021868] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 18:08:40 taoseeker kernel: [ 3000.225863] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 18:08:40 taoseeker kernel: [ 3000.429859] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 18:08:40 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 18:08:40 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 18:08:41 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 18:08:41 taoseeker kernel: [ 3001.687050] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 18:08:41 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 18:08:41 taoseeker kernel: [ 3001.698221] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 18:08:41 taoseeker kernel: [ 3001.901843] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 18:08:42 taoseeker kernel: [ 3002.105833] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 18:08:42 taoseeker kernel: [ 3002.309827] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 18:08:42 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 18:08:42 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 18:08:43 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 18:08:43 taoseeker kernel: [ 3003.567046] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 18:08:43 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 18:08:43 taoseeker kernel: [ 3003.578166] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 18:08:43 taoseeker kernel: [ 3003.781813] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 18:08:43 taoseeker kernel: [ 3003.985806] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 18:08:44 taoseeker kernel: [ 3004.189802] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 18:08:44 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 18:08:44 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 18:08:45 taoseeker dhclient: DHCPDISCOVER on wlan2 to 255.255.255.255 port 67 interval 20 Oct 5 18:08:51 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 18:08:51 taoseeker kernel: [ 3011.602882] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 18:08:51 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 18:08:51 taoseeker kernel: [ 3011.614055] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 18:08:51 taoseeker kernel: [ 3011.817694] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 18:08:51 taoseeker kernel: [ 3012.021687] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 18:08:52 taoseeker kernel: [ 3012.225683] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 18:08:52 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 18:08:52 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 18:08:53 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 18:08:53 taoseeker kernel: [ 3013.482909] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 18:08:53 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 18:08:53 taoseeker kernel: [ 3013.494023] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 18:08:53 taoseeker wpa_supplicant[1011]: wlan2: Trying to associate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 18:08:53 taoseeker kernel: [ 3013.697665] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 18:08:53 taoseeker kernel: [ 3013.700953] wlan2: authenticated Oct 5 18:08:53 taoseeker kernel: [ 3013.701574] wlan2: associating with AP with corrupt beacon Oct 5 18:08:53 taoseeker kernel: [ 3013.702268] wlan2: associate with 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 18:08:53 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> associating Oct 5 18:08:53 taoseeker kernel: [ 3013.711934] wlan2: RX AssocResp from 50:67:f0:d3:ed:c4 (capab=0xc11 status=0 aid=1) Oct 5 18:08:53 taoseeker kernel: [ 3013.712464] wlan2: associated Oct 5 18:08:53 taoseeker kernel: [ 3013.713117] cfg80211: Pending regulatory request, waiting for it to be processed... Oct 5 18:08:53 taoseeker wpa_supplicant[1011]: wlan2: Associated with 50:67:f0:d3:ed:c4 Oct 5 18:08:53 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associating -> associated Oct 5 18:08:53 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associated -> 4-way handshake Oct 5 18:08:55 taoseeker wpa_supplicant[1011]: wlan2: WPA: Key negotiation completed with 50:67:f0:d3:ed:c4 [PTK=CCMP GTK=CCMP] Oct 5 18:08:55 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-CONNECTED - Connection to 50:67:f0:d3:ed:c4 completed (reauth) [id=0 id_str=] Oct 5 18:08:55 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: 4-way handshake -> completed Oct 5 18:08:58 taoseeker NetworkManager[800]: (wlan2): DHCPv4 request timed out. Oct 5 18:08:58 taoseeker NetworkManager[800]: (wlan2): canceled DHCP transaction, DHCP client pid 2277 Oct 5 18:08:58 taoseeker NetworkManager[800]: Activation (wlan2) Stage 4 of 5 (IPv4 Configure Timeout) scheduled... Oct 5 18:08:58 taoseeker NetworkManager[800]: Activation (wlan2) Stage 4 of 5 (IPv4 Configure Timeout) started... Oct 5 18:08:58 taoseeker NetworkManager[800]: (wlan2): device state change: ip-config -> failed (reason 'ip-config-unavailable') [70 120 5] Oct 5 18:08:58 taoseeker NetworkManager[800]: Activation (wlan2) failed for connection 'Telenor6904ett' Oct 5 18:08:58 taoseeker NetworkManager[800]: Activation (wlan2) Stage 4 of 5 (IPv4 Configure Timeout) complete. Oct 5 18:08:58 taoseeker NetworkManager[800]: (wlan2): device state change: failed -> disconnected (reason 'none') [120 30 0] Oct 5 18:08:58 taoseeker NetworkManager[800]: (wlan2): deactivating device (reason 'none') [0] Oct 5 18:08:58 taoseeker kernel: [ 3018.997326] wlan2: deauthenticating from 50:67:f0:d3:ed:c4 by local choice (reason=3) Oct 5 18:08:58 taoseeker kernel: [ 3018.999504] cfg80211: All devices are disconnected, going to restore regulatory settings Oct 5 18:08:58 taoseeker kernel: [ 3018.999516] cfg80211: Restoring regulatory settings Oct 5 18:08:58 taoseeker kernel: [ 3018.999534] cfg80211: Calling CRDA for country: NO Oct 5 18:08:58 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-DISCONNECTED bssid=00:00:00:00:00:00 reason=3 Oct 5 18:08:58 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: completed -> disconnected Oct 5 18:09:01 taoseeker NetworkManager[800]: Auto-activating connection 'Telenor6904ett'. Oct 5 18:09:01 taoseeker NetworkManager[800]: Activation (wlan2) starting connection 'Telenor6904ett' Oct 5 18:09:01 taoseeker NetworkManager[800]: (wlan2): device state change: disconnected -> prepare (reason 'none') [30 40 0] Oct 5 18:09:01 taoseeker NetworkManager[800]: Activation (wlan2) Stage 1 of 5 (Device Prepare) scheduled... Oct 5 18:09:01 taoseeker NetworkManager[800]: Activation (wlan2) Stage 1 of 5 (Device Prepare) started... Oct 5 18:09:01 taoseeker NetworkManager[800]: Activation (wlan2) Stage 2 of 5 (Device Configure) scheduled... Oct 5 18:09:01 taoseeker NetworkManager[800]: Activation (wlan2) Stage 1 of 5 (Device Prepare) complete. Oct 5 18:09:01 taoseeker NetworkManager[800]: Activation (wlan2) Stage 2 of 5 (Device Configure) starting... Oct 5 18:09:01 taoseeker NetworkManager[800]: (wlan2): device state change: prepare -> config (reason 'none') [40 50 0] Oct 5 18:09:01 taoseeker NetworkManager[800]: Activation (wlan2/wireless): access point 'Telenor6904ett' has security, but secrets are required. Oct 5 18:09:01 taoseeker NetworkManager[800]: (wlan2): device state change: config -> need-auth (reason 'none') [50 60 0] Oct 5 18:09:01 taoseeker NetworkManager[800]: Activation (wlan2) Stage 2 of 5 (Device Configure) complete. Oct 5 18:09:01 taoseeker NetworkManager[800]: Activation (wlan2) Stage 1 of 5 (Device Prepare) scheduled... Oct 5 18:09:01 taoseeker NetworkManager[800]: Activation (wlan2) Stage 1 of 5 (Device Prepare) started... Oct 5 18:09:01 taoseeker NetworkManager[800]: (wlan2): device state change: need-auth -> prepare (reason 'none') [60 40 0] Oct 5 18:09:01 taoseeker NetworkManager[800]: Activation (wlan2) Stage 2 of 5 (Device Configure) scheduled... Oct 5 18:09:01 taoseeker NetworkManager[800]: Activation (wlan2) Stage 1 of 5 (Device Prepare) complete. Oct 5 18:09:01 taoseeker NetworkManager[800]: Activation (wlan2) Stage 2 of 5 (Device Configure) starting... Oct 5 18:09:01 taoseeker NetworkManager[800]: (wlan2): device state change: prepare -> config (reason 'none') [40 50 0] Oct 5 18:09:01 taoseeker NetworkManager[800]: Activation (wlan2/wireless): connection 'Telenor6904ett' has security, and secrets exist. No new secrets needed. Oct 5 18:09:01 taoseeker NetworkManager[800]: Config: added 'ssid' value 'Telenor6904ett' Oct 5 18:09:01 taoseeker NetworkManager[800]: Config: added 'scan_ssid' value '1' Oct 5 18:09:01 taoseeker NetworkManager[800]: Config: added 'key_mgmt' value 'WPA-PSK' Oct 5 18:09:01 taoseeker NetworkManager[800]: Config: added 'auth_alg' value 'OPEN' Oct 5 18:09:01 taoseeker NetworkManager[800]: Config: added 'psk' value '' Oct 5 18:09:01 taoseeker NetworkManager[800]: Activation (wlan2) Stage 2 of 5 (Device Configure) complete. Oct 5 18:09:01 taoseeker NetworkManager[800]: Config: set interface ap_scan to 1 Oct 5 18:09:02 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 18:09:03 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 18:09:03 taoseeker kernel: [ 3023.246740] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 18:09:03 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 18:09:03 taoseeker kernel: [ 3023.257892] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 18:09:03 taoseeker kernel: [ 3023.461523] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 18:09:03 taoseeker kernel: [ 3023.665512] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 18:09:03 taoseeker kernel: [ 3023.869507] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 18:09:03 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 18:09:03 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 18:09:05 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 18:09:05 taoseeker kernel: [ 3025.126728] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 18:09:05 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 18:09:05 taoseeker kernel: [ 3025.137864] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 18:09:05 taoseeker kernel: [ 3025.341491] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 18:09:05 taoseeker kernel: [ 3025.545487] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 18:09:05 taoseeker kernel: [ 3025.749482] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 18:09:05 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 18:09:05 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 18:09:06 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 18:09:06 taoseeker kernel: [ 3027.006741] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 18:09:06 taoseeker kernel: [ 3027.017842] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 18:09:06 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 18:09:07 taoseeker kernel: [ 3027.221459] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 18:09:07 taoseeker kernel: [ 3027.425462] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 18:09:07 taoseeker kernel: [ 3027.629524] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 18:09:07 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 18:09:07 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 18:09:08 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 18:09:08 taoseeker kernel: [ 3028.886626] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 18:09:08 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 18:09:08 taoseeker kernel: [ 3028.897799] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 18:09:09 taoseeker kernel: [ 3029.101437] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 18:09:09 taoseeker kernel: [ 3029.305435] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 18:09:09 taoseeker kernel: [ 3029.509424] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 18:09:09 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 18:09:09 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 18:09:10 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 18:09:10 taoseeker kernel: [ 3030.766636] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 18:09:10 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 18:09:10 taoseeker kernel: [ 3030.777772] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 18:09:10 taoseeker kernel: [ 3030.981494] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 18:09:11 taoseeker kernel: [ 3031.185401] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 18:09:11 taoseeker kernel: [ 3031.389399] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 18:09:11 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 18:09:11 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 18:09:12 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 18:09:12 taoseeker kernel: [ 3032.646614] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 18:09:12 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 18:09:12 taoseeker kernel: [ 3032.657783] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 18:09:12 taoseeker kernel: [ 3032.861424] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 18:09:12 taoseeker kernel: [ 3033.065422] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 18:09:13 taoseeker kernel: [ 3033.269370] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 18:09:13 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 18:09:13 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 18:09:14 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 18:09:14 taoseeker kernel: [ 3034.526564] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 18:09:14 taoseeker kernel: [ 3034.539487] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 18:09:14 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 18:09:14 taoseeker kernel: [ 3034.741354] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 18:09:14 taoseeker kernel: [ 3034.945350] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 18:09:15 taoseeker kernel: [ 3035.149342] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 18:09:15 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 18:09:15 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 18:09:16 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 18:09:16 taoseeker kernel: [ 3036.406549] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 18:09:16 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 18:09:16 taoseeker kernel: [ 3036.417707] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 18:09:16 taoseeker wpa_supplicant[1011]: wlan2: Trying to associate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 18:09:16 taoseeker kernel: [ 3036.423405] wlan2: authenticated Oct 5 18:09:16 taoseeker kernel: [ 3036.423961] wlan2: associating with AP with corrupt beacon Oct 5 18:09:16 taoseeker kernel: [ 3036.425366] wlan2: associate with 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 18:09:16 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> associating Oct 5 18:09:16 taoseeker kernel: [ 3036.431283] wlan2: RX AssocResp from 50:67:f0:d3:ed:c4 (capab=0xc11 status=0 aid=1) Oct 5 18:09:16 taoseeker wpa_supplicant[1011]: wlan2: Associated with 50:67:f0:d3:ed:c4 Oct 5 18:09:16 taoseeker kernel: [ 3036.437351] wlan2: associated Oct 5 18:09:16 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associating -> associated Oct 5 18:09:17 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associated -> 4-way handshake Oct 5 18:09:17 taoseeker wpa_supplicant[1011]: wlan2: WPA: Key negotiation completed with 50:67:f0:d3:ed:c4 [PTK=CCMP GTK=CCMP] Oct 5 18:09:17 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-CONNECTED - Connection to 50:67:f0:d3:ed:c4 completed (reauth) [id=0 id_str=] Oct 5 18:09:17 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: 4-way handshake -> completed Oct 5 18:09:17 taoseeker NetworkManager[800]: Activation (wlan2/wireless) Stage 2 of 5 (Device Configure) successful. Connected to wireless network 'Telenor6904ett'. Oct 5 18:09:17 taoseeker NetworkManager[800]: Activation (wlan2) Stage 3 of 5 (IP Configure Start) scheduled. Oct 5 18:09:17 taoseeker NetworkManager[800]: Activation (wlan2) Stage 3 of 5 (IP Configure Start) started... Oct 5 18:09:17 taoseeker NetworkManager[800]: (wlan2): device state change: config -> ip-config (reason 'none') [50 70 0] Oct 5 18:09:17 taoseeker NetworkManager[800]: Activation (wlan2) Beginning DHCPv4 transaction (timeout in 45 seconds) Oct 5 18:09:17 taoseeker NetworkManager[800]: dhclient started with pid 2284 Oct 5 18:09:17 taoseeker NetworkManager[800]: Activation (wlan2) Beginning IP6 addrconf. Oct 5 18:09:17 taoseeker NetworkManager[800]: Activation (wlan2) Stage 3 of 5 (IP Configure Start) complete. Oct 5 18:09:17 taoseeker dhclient: Internet Systems Consortium DHCP Client 4.2.4 Oct 5 18:09:17 taoseeker dhclient: Copyright 2004-2012 Internet Systems Consortium. Oct 5 18:09:17 taoseeker dhclient: All rights reserved. Oct 5 18:09:17 taoseeker dhclient: For info, please visit https://www.isc.org/software/dhcp/ Oct 5 18:09:17 taoseeker dhclient: Oct 5 18:09:17 taoseeker dhclient: Listening on LPF/wlan2/00:14:51:81:6a:17 Oct 5 18:09:17 taoseeker dhclient: Sending on LPF/wlan2/00:14:51:81:6a:17 Oct 5 18:09:17 taoseeker NetworkManager[800]: (wlan2): DHCPv4 state changed nbi -> preinit Oct 5 18:09:17 taoseeker dhclient: Sending on Socket/fallback Oct 5 18:09:17 taoseeker dhclient: DHCPREQUEST of 10.0.0.66 on wlan2 to 255.255.255.255 port 67 Oct 5 18:09:20 taoseeker dhclient: DHCPREQUEST of 10.0.0.66 on wlan2 to 255.255.255.255 port 67 Oct 5 18:09:20 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-DISCONNECTED bssid=50:67:f0:d3:ed:c4 reason=4 Oct 5 18:09:20 taoseeker kernel: [ 3040.481314] ieee80211 phy0: >wlan2: No probe response from AP 50:67:f0:d3:ed:c4 after 500ms, disconnecting. Oct 5 18:09:20 taoseeker kernel: [ 3040.483347] cfg80211: All devices are disconnected, going to restore regulatory settings Oct 5 18:09:20 taoseeker kernel: [ 3040.483363] cfg80211: Restoring regulatory settings Oct 5 18:09:20 taoseeker kernel: [ 3040.483379] cfg80211: Calling CRDA to update world regulatory domain Oct 5 18:09:20 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: completed -> disconnected Oct 5 18:09:20 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 18:09:21 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 18:09:21 taoseeker kernel: [ 3041.749218] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 18:09:21 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 18:09:21 taoseeker kernel: [ 3041.757642] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 18:09:21 taoseeker wpa_supplicant[1011]: wlan2: Trying to associate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 18:09:21 taoseeker kernel: [ 3041.762798] wlan2: authenticated Oct 5 18:09:21 taoseeker kernel: [ 3041.763357] wlan2: associating with AP with corrupt beacon Oct 5 18:09:21 taoseeker kernel: [ 3041.765287] wlan2: associate with 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 18:09:21 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> associating Oct 5 18:09:21 taoseeker kernel: [ 3041.969245] wlan2: associate with 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 18:09:21 taoseeker wpa_supplicant[1011]: wlan2: Associated with 50:67:f0:d3:ed:c4 Oct 5 18:09:21 taoseeker kernel: [ 3041.974705] wlan2: RX AssocResp from 50:67:f0:d3:ed:c4 (capab=0xc11 status=0 aid=1) Oct 5 18:09:21 taoseeker kernel: [ 3041.975215] wlan2: associated Oct 5 18:09:21 taoseeker kernel: [ 3041.975871] cfg80211: Pending regulatory request, waiting for it to be processed... Oct 5 18:09:21 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associating -> associated Oct 5 18:09:22 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associated -> 4-way handshake Oct 5 18:09:22 taoseeker wpa_supplicant[1011]: wlan2: WPA: Key negotiation completed with 50:67:f0:d3:ed:c4 [PTK=CCMP GTK=CCMP] Oct 5 18:09:22 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-CONNECTED - Connection to 50:67:f0:d3:ed:c4 completed (reauth) [id=0 id_str=] Oct 5 18:09:22 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: 4-way handshake -> completed Oct 5 18:09:28 taoseeker dhclient: DHCPDISCOVER on wlan2 to 255.255.255.255 port 67 interval 3 Oct 5 18:09:28 taoseeker dhclient: DHCPREQUEST of 10.0.0.66 on wlan2 to 255.255.255.255 port 67 Oct 5 18:09:28 taoseeker dhclient: DHCPOFFER of 10.0.0.66 from 10.0.0.138 Oct 5 18:09:28 taoseeker dhclient: DHCPACK of 10.0.0.66 from 10.0.0.138 Oct 5 18:09:28 taoseeker dhclient: bound to 10.0.0.66 -- renewal in 33447 seconds. Oct 5 18:09:28 taoseeker NetworkManager[800]: (wlan2): DHCPv4 state changed preinit -> bound Oct 5 18:09:28 taoseeker NetworkManager[800]: address 10.0.0.66 Oct 5 18:09:28 taoseeker NetworkManager[800]: prefix 24 (255.255.255.0) Oct 5 18:09:28 taoseeker NetworkManager[800]: gateway 10.0.0.138 Oct 5 18:09:28 taoseeker NetworkManager[800]: hostname 'taoseeker' Oct 5 18:09:28 taoseeker NetworkManager[800]: nameserver '130.67.15.198' Oct 5 18:09:28 taoseeker NetworkManager[800]: nameserver '193.213.112.4' Oct 5 18:09:28 taoseeker NetworkManager[800]: nameserver '10.0.0.138' Oct 5 18:09:28 taoseeker NetworkManager[800]: domain name 'lan' Oct 5 18:09:28 taoseeker NetworkManager[800]: Activation (wlan2) Stage 5 of 5 (IPv4 Configure Commit) scheduled... Oct 5 18:09:28 taoseeker NetworkManager[800]: Activation (wlan2) Stage 5 of 5 (IPv4 Commit) started... Oct 5 18:09:29 taoseeker NetworkManager[800]: (wlan2): device state change: ip-config -> activated (reason 'none') [70 100 0] Oct 5 18:09:29 taoseeker NetworkManager[800]: ((null)): writing resolv.conf to /sbin/resolvconf Oct 5 18:09:29 taoseeker NetworkManager[800]: Policy set 'Telenor6904ett' (wlan2) as default for IPv4 routing and DNS. Oct 5 18:09:29 taoseeker NetworkManager[800]: Activation (wlan2) successful, device activated. Oct 5 18:09:29 taoseeker NetworkManager[800]: Activation (wlan2) Stage 5 of 5 (IPv4 Commit) complete. Oct 5 18:09:36 taoseeker NetworkManager[800]: (wlan2): IP6 addrconf timed out or failed. Oct 5 18:09:36 taoseeker NetworkManager[800]: Activation (wlan2) Stage 4 of 5 (IPv6 Configure Timeout) scheduled... Oct 5 18:09:36 taoseeker NetworkManager[800]: Activation (wlan2) Stage 4 of 5 (IPv6 Configure Timeout) started... Oct 5 18:09:36 taoseeker NetworkManager[800]: Activation (wlan2) Stage 4 of 5 (IPv6 Configure Timeout) complete. Oct 5 18:09:57 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-DISCONNECTED bssid=50:67:f0:d3:ed:c4 reason=4 Oct 5 18:09:57 taoseeker kernel: [ 3077.481346] ieee80211 phy0: >wlan2: No probe response from AP 50:67:f0:d3:ed:c4 after 500ms, disconnecting. Oct 5 18:09:57 taoseeker kernel: [ 3077.486077] cfg80211: All devices are disconnected, going to restore regulatory settings Oct 5 18:09:57 taoseeker kernel: [ 3077.486094] cfg80211: Restoring regulatory settings Oct 5 18:09:57 taoseeker kernel: [ 3077.486111] cfg80211: Calling CRDA to update world regulatory domain Oct 5 18:09:57 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: completed -> disconnected Oct 5 18:09:57 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 18:09:58 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 18:09:58 taoseeker kernel: [ 3078.746494] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 18:09:58 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 18:09:58 taoseeker kernel: [ 3078.757656] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 18:09:58 taoseeker kernel: [ 3078.961313] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 18:09:59 taoseeker kernel: [ 3079.165306] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 18:09:59 taoseeker kernel: [ 3079.369316] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 18:09:59 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 18:09:59 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 18:10:00 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 18:10:00 taoseeker kernel: [ 3080.626480] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 18:10:00 taoseeker wpa_supplicant[1011]: wlan2: Trying to associate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 18:10:00 taoseeker kernel: [ 3080.637640] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 18:10:00 taoseeker kernel: [ 3080.639349] wlan2: authenticated Oct 5 18:10:00 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 18:10:00 taoseeker kernel: [ 3080.642753] wlan2: associating with AP with corrupt beacon Oct 5 18:10:00 taoseeker kernel: [ 3080.645333] wlan2: associate with 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 18:10:00 taoseeker kernel: [ 3080.647800] wlan2: RX AssocResp from 50:67:f0:d3:ed:c4 (capab=0xc11 status=0 aid=1) Oct 5 18:10:00 taoseeker kernel: [ 3080.648288] wlan2: associated Oct 5 18:10:00 taoseeker kernel: [ 3080.648932] cfg80211: Pending regulatory request, waiting for it to be processed... Oct 5 18:10:00 taoseeker wpa_supplicant[1011]: wlan2: Associated with 50:67:f0:d3:ed:c4 Oct 5 18:10:00 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> associating Oct 5 18:10:00 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associating -> associated Oct 5 18:10:01 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associated -> 4-way handshake Oct 5 18:10:01 taoseeker wpa_supplicant[1011]: wlan2: WPA: Key negotiation completed with 50:67:f0:d3:ed:c4 [PTK=CCMP GTK=CCMP] Oct 5 18:10:01 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-CONNECTED - Connection to 50:67:f0:d3:ed:c4 completed (reauth) [id=0 id_str=] Oct 5 18:10:01 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: 4-way handshake -> completed Oct 5 18:10:04 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-DISCONNECTED bssid=50:67:f0:d3:ed:c4 reason=15 Oct 5 18:10:04 taoseeker kernel: [ 3084.391933] wlan2: deauthenticated from 50:67:f0:d3:ed:c4 (Reason: 15) Oct 5 18:10:04 taoseeker kernel: [ 3084.394304] cfg80211: All devices are disconnected, going to restore regulatory settings Oct 5 18:10:04 taoseeker kernel: [ 3084.394317] cfg80211: Restoring regulatory settings Oct 5 18:10:04 taoseeker kernel: [ 3084.394334] cfg80211: Calling CRDA for country: NO Oct 5 18:10:04 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: completed -> disconnected Oct 5 18:10:04 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 18:10:05 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 18:10:05 taoseeker kernel: [ 3085.666414] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 18:10:05 taoseeker kernel: [ 3085.677595] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 18:10:05 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 18:10:05 taoseeker kernel: [ 3085.881219] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 18:10:06 taoseeker kernel: [ 3086.085221] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 18:10:06 taoseeker kernel: [ 3086.289212] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 18:10:06 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 18:10:06 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 18:10:07 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 18:10:07 taoseeker kernel: [ 3087.551148] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 18:10:07 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 18:10:07 taoseeker kernel: [ 3087.557571] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 18:10:07 taoseeker kernel: [ 3087.761199] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 18:10:07 taoseeker kernel: [ 3087.965183] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 18:10:07 taoseeker NetworkManager[800]: (wlan2): roamed from BSSID 50:67:F0:D3:ED:C4 (Telenor6904ett) to (none) ((none)) Oct 5 18:10:08 taoseeker kernel: [ 3088.169189] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 18:10:08 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 18:10:08 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 18:10:09 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 18:10:09 taoseeker kernel: [ 3089.426361] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 18:10:09 taoseeker kernel: [ 3089.437528] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 18:10:09 taoseeker kernel: [ 3089.440917] wlan2: authenticated Oct 5 18:10:09 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 18:10:09 taoseeker wpa_supplicant[1011]: wlan2: Trying to associate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 18:10:09 taoseeker kernel: [ 3089.443898] wlan2: associating with AP with corrupt beacon Oct 5 18:10:09 taoseeker kernel: [ 3089.445213] wlan2: associate with 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 18:10:09 taoseeker kernel: [ 3089.447787] wlan2: RX AssocResp from 50:67:f0:d3:ed:c4 (capab=0xc11 status=0 aid=1) Oct 5 18:10:09 taoseeker kernel: [ 3089.448329] wlan2: associated Oct 5 18:10:09 taoseeker wpa_supplicant[1011]: wlan2: Associated with 50:67:f0:d3:ed:c4 Oct 5 18:10:09 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> associating Oct 5 18:10:09 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associating -> associated Oct 5 18:10:09 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associated -> 4-way handshake Oct 5 18:10:09 taoseeker wpa_supplicant[1011]: wlan2: WPA: Key negotiation completed with 50:67:f0:d3:ed:c4 [PTK=CCMP GTK=CCMP] Oct 5 18:10:09 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-CONNECTED - Connection to 50:67:f0:d3:ed:c4 completed (reauth) [id=0 id_str=] Oct 5 18:10:09 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: 4-way handshake -> completed Oct 5 18:10:13 taoseeker NetworkManager[800]: (wlan2): roamed from BSSID (none) ((none)) to 50:67:F0:D3:ED:C4 (Telenor6904ett) Oct 5 18:12:09 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-DISCONNECTED bssid=50:67:f0:d3:ed:c4 reason=4 Oct 5 18:12:09 taoseeker kernel: [ 3209.479656] ieee80211 phy0: >wlan2: No probe response from AP 50:67:f0:d3:ed:c4 after 500ms, disconnecting. Oct 5 18:12:09 taoseeker kernel: [ 3209.481790] cfg80211: All devices are disconnected, going to restore regulatory settings Oct 5 18:12:09 taoseeker kernel: [ 3209.481808] cfg80211: Restoring regulatory settings Oct 5 18:12:09 taoseeker kernel: [ 3209.481825] cfg80211: Calling CRDA to update world regulatory domain Oct 5 18:12:09 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: completed -> disconnected Oct 5 18:12:09 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 18:12:10 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 18:12:10 taoseeker kernel: [ 3210.738098] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 18:12:10 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 18:12:10 taoseeker kernel: [ 3210.748032] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 18:12:10 taoseeker kernel: [ 3210.750765] wlan2: authenticated Oct 5 18:12:10 taoseeker wpa_supplicant[1011]: wlan2: Trying to associate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 18:12:10 taoseeker kernel: [ 3210.752513] wlan2: associating with AP with corrupt beacon Oct 5 18:12:10 taoseeker kernel: [ 3210.756027] wlan2: associate with 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 18:12:10 taoseeker kernel: [ 3210.758610] wlan2: RX AssocResp from 50:67:f0:d3:ed:c4 (capab=0xc11 status=0 aid=1) Oct 5 18:12:10 taoseeker kernel: [ 3210.759149] wlan2: associated Oct 5 18:12:10 taoseeker kernel: [ 3210.759856] cfg80211: Pending regulatory request, waiting for it to be processed... Oct 5 18:12:10 taoseeker wpa_supplicant[1011]: wlan2: Associated with 50:67:f0:d3:ed:c4 Oct 5 18:12:10 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> associating Oct 5 18:12:10 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associating -> associated Oct 5 18:12:11 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associated -> 4-way handshake Oct 5 18:12:11 taoseeker wpa_supplicant[1011]: wlan2: WPA: Key negotiation completed with 50:67:f0:d3:ed:c4 [PTK=CCMP GTK=CCMP] Oct 5 18:12:11 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-CONNECTED - Connection to 50:67:f0:d3:ed:c4 completed (reauth) [id=0 id_str=] Oct 5 18:12:11 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: 4-way handshake -> completed Oct 5 18:15:02 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-DISCONNECTED bssid=50:67:f0:d3:ed:c4 reason=4 Oct 5 18:15:02 taoseeker kernel: [ 3382.471740] ieee80211 phy0: >wlan2: No probe response from AP 50:67:f0:d3:ed:c4 after 500ms, disconnecting. Oct 5 18:15:02 taoseeker kernel: [ 3382.473794] cfg80211: All devices are disconnected, going to restore regulatory settings Oct 5 18:15:02 taoseeker kernel: [ 3382.473811] cfg80211: Restoring regulatory settings Oct 5 18:15:02 taoseeker kernel: [ 3382.473828] cfg80211: Calling CRDA for country: NO Oct 5 18:15:02 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: completed -> disconnected Oct 5 18:15:02 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 18:15:03 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 18:15:03 taoseeker kernel: [ 3383.730480] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 18:15:03 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 18:15:03 taoseeker kernel: [ 3383.740024] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 18:15:03 taoseeker kernel: [ 3383.943652] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 18:15:04 taoseeker kernel: [ 3384.147647] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 18:15:04 taoseeker kernel: [ 3384.351628] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 18:15:04 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 18:15:04 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 18:15:05 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 18:15:05 taoseeker kernel: [ 3385.624695] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 18:15:05 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 18:15:05 taoseeker kernel: [ 3385.635939] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 18:15:05 taoseeker kernel: [ 3385.643332] wlan2: authenticated Oct 5 18:15:05 taoseeker wpa_supplicant[1011]: wlan2: Trying to associate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 18:15:05 taoseeker kernel: [ 3385.644662] wlan2: associating with AP with corrupt beacon Oct 5 18:15:05 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> associating Oct 5 18:15:05 taoseeker kernel: [ 3385.647916] wlan2: associate with 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 18:15:05 taoseeker wpa_supplicant[1011]: wlan2: Associated with 50:67:f0:d3:ed:c4 Oct 5 18:15:05 taoseeker kernel: [ 3385.652048] wlan2: RX AssocResp from 50:67:f0:d3:ed:c4 (capab=0xc11 status=0 aid=1) Oct 5 18:15:05 taoseeker kernel: [ 3385.652752] wlan2: associated Oct 5 18:15:05 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associating -> associated Oct 5 18:15:06 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associated -> 4-way handshake Oct 5 18:15:07 taoseeker wpa_supplicant[1011]: wlan2: WPA: Key negotiation completed with 50:67:f0:d3:ed:c4 [PTK=CCMP GTK=CCMP] Oct 5 18:15:07 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-CONNECTED - Connection to 50:67:f0:d3:ed:c4 completed (reauth) [id=0 id_str=] Oct 5 18:15:07 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: 4-way handshake -> completed Oct 5 18:16:02 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-DISCONNECTED bssid=50:67:f0:d3:ed:c4 reason=4 Oct 5 18:16:02 taoseeker kernel: [ 3442.469557] ieee80211 phy0: >wlan2: No probe response from AP 50:67:f0:d3:ed:c4 after 500ms, disconnecting. Oct 5 18:16:02 taoseeker kernel: [ 3442.471781] cfg80211: All devices are disconnected, going to restore regulatory settings Oct 5 18:16:02 taoseeker kernel: [ 3442.471799] cfg80211: Restoring regulatory settings Oct 5 18:16:02 taoseeker kernel: [ 3442.471815] cfg80211: Calling CRDA to update world regulatory domain Oct 5 18:16:02 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: completed -> disconnected Oct 5 18:16:02 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 18:16:03 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 18:16:03 taoseeker kernel: [ 3443.726710] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 18:16:03 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 18:16:03 taoseeker kernel: [ 3443.737871] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 18:16:03 taoseeker kernel: [ 3443.941479] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 18:16:04 taoseeker kernel: [ 3444.145472] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 18:16:04 taoseeker kernel: [ 3444.349463] wlan2: authentication with 50:67:f0:d3:ed:c4 timed out Oct 5 18:16:04 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> disconnected Oct 5 18:16:04 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 18:16:05 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 18:16:05 taoseeker kernel: [ 3445.630648] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 18:16:05 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 18:16:05 taoseeker kernel: [ 3445.641790] wlan2: direct probe to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 18:16:05 taoseeker wpa_supplicant[1011]: wlan2: Trying to associate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 18:16:05 taoseeker kernel: [ 3445.845418] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 18:16:05 taoseeker kernel: [ 3445.847024] wlan2: authenticated Oct 5 18:16:05 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> associating Oct 5 18:16:05 taoseeker kernel: [ 3445.853473] wlan2: associating with AP with corrupt beacon Oct 5 18:16:05 taoseeker kernel: [ 3445.857797] wlan2: associate with 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 18:16:05 taoseeker kernel: [ 3446.061350] wlan2: associate with 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 18:16:05 taoseeker kernel: [ 3446.063790] wlan2: RX AssocResp from 50:67:f0:d3:ed:c4 (capab=0xc11 status=0 aid=1) Oct 5 18:16:05 taoseeker kernel: [ 3446.064280] wlan2: associated Oct 5 18:16:05 taoseeker kernel: [ 3446.064939] cfg80211: Pending regulatory request, waiting for it to be processed... Oct 5 18:16:05 taoseeker wpa_supplicant[1011]: wlan2: Associated with 50:67:f0:d3:ed:c4 Oct 5 18:16:05 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associating -> associated Oct 5 18:16:06 taoseeker wpa_supplicant[1011]: wlan2: WPA: Key negotiation completed with 50:67:f0:d3:ed:c4 [PTK=CCMP GTK=CCMP] Oct 5 18:16:06 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-CONNECTED - Connection to 50:67:f0:d3:ed:c4 completed (reauth) [id=0 id_str=] Oct 5 18:16:06 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associated -> 4-way handshake Oct 5 18:16:06 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: 4-way handshake -> completed Oct 5 18:18:21 taoseeker kernel: [ 3581.352287] wlan2: deauthenticated from 50:67:f0:d3:ed:c4 (Reason: 3) Oct 5 18:18:21 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-DISCONNECTED bssid=50:67:f0:d3:ed:c4 reason=3 Oct 5 18:18:21 taoseeker kernel: [ 3581.355140] cfg80211: All devices are disconnected, going to restore regulatory settings Oct 5 18:18:21 taoseeker kernel: [ 3581.355157] cfg80211: Restoring regulatory settings Oct 5 18:18:21 taoseeker kernel: [ 3581.355194] cfg80211: Calling CRDA to update world regulatory domain Oct 5 18:18:21 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: completed -> disconnected Oct 5 18:18:21 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 18:18:22 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 18:18:22 taoseeker kernel: [ 3582.610412] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 18:18:22 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 18:18:22 taoseeker kernel: [ 3582.621585] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 18:18:22 taoseeker kernel: [ 3582.624246] wlan2: authenticated Oct 5 18:18:22 taoseeker wpa_supplicant[1011]: wlan2: Trying to associate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 18:18:22 taoseeker kernel: [ 3582.628627] wlan2: associating with AP with corrupt beacon Oct 5 18:18:22 taoseeker kernel: [ 3582.629619] wlan2: associate with 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 18:18:22 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> associating Oct 5 18:18:22 taoseeker kernel: [ 3582.637417] wlan2: RX AssocResp from 50:67:f0:d3:ed:c4 (capab=0xc11 status=0 aid=1) Oct 5 18:18:22 taoseeker wpa_supplicant[1011]: wlan2: Associated with 50:67:f0:d3:ed:c4 Oct 5 18:18:22 taoseeker kernel: [ 3582.661323] wlan2: associated Oct 5 18:18:22 taoseeker kernel: [ 3582.662006] cfg80211: Pending regulatory request, waiting for it to be processed... Oct 5 18:18:22 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associating -> associated Oct 5 18:18:23 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associated -> 4-way handshake Oct 5 18:18:24 taoseeker wpa_supplicant[1011]: wlan2: WPA: Key negotiation completed with 50:67:f0:d3:ed:c4 [PTK=CCMP GTK=CCMP] Oct 5 18:18:24 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-CONNECTED - Connection to 50:67:f0:d3:ed:c4 completed (reauth) [id=0 id_str=] Oct 5 18:18:24 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: 4-way handshake -> completed Oct 5 18:19:29 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-DISCONNECTED bssid=50:67:f0:d3:ed:c4 reason=4 Oct 5 18:19:29 taoseeker kernel: [ 3649.463571] ieee80211 phy0: >wlan2: No probe response from AP 50:67:f0:d3:ed:c4 after 500ms, disconnecting. Oct 5 18:19:29 taoseeker kernel: [ 3649.468295] cfg80211: All devices are disconnected, going to restore regulatory settings Oct 5 18:19:29 taoseeker kernel: [ 3649.468312] cfg80211: Restoring regulatory settings Oct 5 18:19:29 taoseeker kernel: [ 3649.468331] cfg80211: Calling CRDA for country: NO Oct 5 18:19:29 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: completed -> disconnected Oct 5 18:19:29 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 18:19:30 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 18:19:30 taoseeker kernel: [ 3650.720696] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 18:19:30 taoseeker wpa_supplicant[1011]: wlan2: Trying to associate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 18:19:30 taoseeker kernel: [ 3650.731893] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 18:19:30 taoseeker kernel: [ 3650.733610] wlan2: authenticated Oct 5 18:19:30 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 18:19:30 taoseeker kernel: [ 3650.737552] wlan2: associating with AP with corrupt beacon Oct 5 18:19:30 taoseeker kernel: [ 3650.739597] wlan2: associate with 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 18:19:30 taoseeker kernel: [ 3650.742112] wlan2: RX AssocResp from 50:67:f0:d3:ed:c4 (capab=0xc11 status=0 aid=1) Oct 5 18:19:30 taoseeker kernel: [ 3650.742667] wlan2: associated Oct 5 18:19:30 taoseeker wpa_supplicant[1011]: wlan2: Associated with 50:67:f0:d3:ed:c4 Oct 5 18:19:30 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> associating Oct 5 18:19:30 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associating -> associated Oct 5 18:19:31 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associated -> 4-way handshake Oct 5 18:19:31 taoseeker wpa_supplicant[1011]: wlan2: WPA: Key negotiation completed with 50:67:f0:d3:ed:c4 [PTK=CCMP GTK=CCMP] Oct 5 18:19:31 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-CONNECTED - Connection to 50:67:f0:d3:ed:c4 completed (reauth) [id=0 id_str=] Oct 5 18:19:31 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: 4-way handshake -> completed Oct 5 18:20:02 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-DISCONNECTED bssid=50:67:f0:d3:ed:c4 reason=4 Oct 5 18:20:02 taoseeker kernel: [ 3682.462807] ieee80211 phy0: >wlan2: No probe response from AP 50:67:f0:d3:ed:c4 after 500ms, disconnecting. Oct 5 18:20:02 taoseeker kernel: [ 3682.466866] cfg80211: All devices are disconnected, going to restore regulatory settings Oct 5 18:20:02 taoseeker kernel: [ 3682.466883] cfg80211: Restoring regulatory settings Oct 5 18:20:02 taoseeker kernel: [ 3682.466902] cfg80211: Calling CRDA to update world regulatory domain Oct 5 18:20:02 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: completed -> disconnected Oct 5 18:20:02 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: disconnected -> scanning Oct 5 18:20:03 taoseeker wpa_supplicant[1011]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 18:20:03 taoseeker kernel: [ 3683.719984] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 18:20:03 taoseeker wpa_supplicant[1011]: wlan2: Trying to associate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 18:20:03 taoseeker kernel: [ 3683.731134] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 18:20:03 taoseeker kernel: [ 3683.732759] wlan2: authenticated Oct 5 18:20:03 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 18:20:03 taoseeker kernel: [ 3683.736358] wlan2: associating with AP with corrupt beacon Oct 5 18:20:03 taoseeker kernel: [ 3683.739116] wlan2: associate with 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 18:20:03 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: authenticating -> associating Oct 5 18:20:03 taoseeker kernel: [ 3683.942757] wlan2: associate with 50:67:f0:d3:ed:c4 (try 2/3) Oct 5 18:20:04 taoseeker kernel: [ 3684.146755] wlan2: associate with 50:67:f0:d3:ed:c4 (try 3/3) Oct 5 18:20:04 taoseeker kernel: [ 3684.152987] wlan2: RX AssocResp from 50:67:f0:d3:ed:c4 (capab=0xc11 status=0 aid=1) Oct 5 18:20:04 taoseeker kernel: [ 3684.153556] wlan2: associated Oct 5 18:20:04 taoseeker wpa_supplicant[1011]: wlan2: Associated with 50:67:f0:d3:ed:c4 Oct 5 18:20:04 taoseeker kernel: [ 3684.156818] cfg80211: Pending regulatory request, waiting for it to be processed... Oct 5 18:20:04 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associating -> associated Oct 5 18:20:04 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: associated -> 4-way handshake Oct 5 18:20:04 taoseeker wpa_supplicant[1011]: wlan2: WPA: Key negotiation completed with 50:67:f0:d3:ed:c4 [PTK=CCMP GTK=CCMP] Oct 5 18:20:04 taoseeker wpa_supplicant[1011]: wlan2: CTRL-EVENT-CONNECTED - Connection to 50:67:f0:d3:ed:c4 completed (reauth) [id=0 id_str=] Oct 5 18:20:04 taoseeker NetworkManager[800]: (wlan2): supplicant interface state: 4-way handshake -> completed Oct 5 18:20:37 taoseeker NetworkManager[800]: nl_recvmsgs() error: (-33) Dump inconsistency detected, interrupted Oct 5 18:24:57 taoseeker wpa_supplicant[1011]: wlan2: WPA: Group rekeying completed with 50:67:f0:d3:ed:c4 [GTK=CCMP] Oct 5 18:25:25 taoseeker NetworkManager[800]: nl_recvmsgs() error: (-33) Dump inconsistency detected, interrupted Oct 5 18:28:01 taoseeker NetworkManager[800]: nl_recvmsgs() error: (-33) Dump inconsistency detected, interrupted Oct 5 18:28:37 taoseeker kernel: Kernel logging (proc) stopped. Oct 5 21:24:00 taoseeker kernel: imklog 5.8.6, log source = /proc/kmsg started. Oct 5 21:24:00 taoseeker kernel: [ 0.000000] Using PowerMac machine description Oct 5 21:24:00 taoseeker kernel: [ 0.000000] Total memory = 1536MB; using 4096kB for hash table (at cfc00000) Oct 5 21:24:00 taoseeker kernel: [ 0.000000] Initializing cgroup subsys cpuset Oct 5 21:24:00 taoseeker kernel: [ 0.000000] Initializing cgroup subsys cpu Oct 5 21:24:00 taoseeker kernel: [ 0.000000] Linux version 3.5.0-17-powerpc-smp (buildd@adare) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #26-Ubuntu SMP Wed Oct 3 21:29:20 UTC 2012 (Ubuntu 3.5.0-17.26-powerpc-smp 3.5.5) Oct 5 21:24:00 taoseeker kernel: [ 0.000000] Found initrd at 0xc1800000:0xc2720000 Oct 5 21:24:00 taoseeker kernel: [ 0.000000] Found UniNorth memory controller & host bridge @ 0xf8000000 revision: 0xd2 Oct 5 21:24:00 taoseeker kernel: [ 0.000000] Mapped at 0xff7c0000 Oct 5 21:24:00 taoseeker kernel: [ 0.000000] Found a Intrepid mac-io controller, rev: 0, mapped at 0xff740000 Oct 5 21:24:00 taoseeker kernel: [ 0.000000] Processor NAP mode on idle enabled. Oct 5 21:24:00 taoseeker kernel: [ 0.000000] PowerMac motherboard: iBook G4 Oct 5 21:24:00 taoseeker kernel: [ 0.000000] via-pmu: Server Mode is disabled Oct 5 21:24:00 taoseeker kernel: [ 0.000000] PMU driver v2 initialized for Core99, firmware: 0c Oct 5 21:24:00 taoseeker kernel: [ 0.000000] CPU maps initialized for 1 thread per core Oct 5 21:24:00 taoseeker kernel: [ 0.000000] (thread shift is 0) Oct 5 21:24:00 taoseeker kernel: [ 0.000000] bootconsole [udbg0] enabled Oct 5 21:24:00 taoseeker kernel: [ 0.000000] Found UniNorth PCI host bridge at 0x00000000f0000000. Firmware bus number: 0->0 Oct 5 21:24:00 taoseeker kernel: [ 0.000000] PCI host bridge /pci@f0000000 ranges: Oct 5 21:24:00 taoseeker kernel: [ 0.000000] MEM 0x00000000f1000000..0x00000000f1ffffff -> 0x00000000f1000000 Oct 5 21:24:00 taoseeker kernel: [ 0.000000] IO 0x00000000f0000000..0x00000000f07fffff -> 0x0000000000000000 Oct 5 21:24:00 taoseeker kernel: [ 0.000000] MEM 0x0000000090000000..0x000000009fffffff -> 0x0000000090000000 Oct 5 21:24:00 taoseeker kernel: [ 0.000000] Found UniNorth PCI host bridge at 0x00000000f2000000. Firmware bus number: 0->0 Oct 5 21:24:00 taoseeker kernel: [ 0.000000] PCI host bridge /pci@f2000000 (primary) ranges: Oct 5 21:24:00 taoseeker kernel: [ 0.000000] MEM 0x00000000f3000000..0x00000000f3ffffff -> 0x00000000f3000000 Oct 5 21:24:00 taoseeker kernel: [ 0.000000] IO 0x00000000f2000000..0x00000000f27fffff -> 0x0000000000000000 Oct 5 21:24:00 taoseeker kernel: [ 0.000000] MEM 0x0000000080000000..0x000000008fffffff -> 0x0000000080000000 Oct 5 21:24:00 taoseeker kernel: [ 0.000000] Found UniNorth PCI host bridge at 0x00000000f4000000. Firmware bus number: 0->0 Oct 5 21:24:00 taoseeker kernel: [ 0.000000] PCI host bridge /pci@f4000000 ranges: Oct 5 21:24:00 taoseeker kernel: [ 0.000000] MEM 0x00000000f5000000..0x00000000f5ffffff -> 0x00000000f5000000 Oct 5 21:24:00 taoseeker kernel: [ 0.000000] IO 0x00000000f4000000..0x00000000f47fffff -> 0x0000000000000000 Oct 5 21:24:00 taoseeker kernel: [ 0.000000] nvram: Checking bank 0... Oct 5 21:24:00 taoseeker kernel: [ 0.000000] nvram: gen0=968, gen1=969 Oct 5 21:24:00 taoseeker kernel: [ 0.000000] nvram: Active bank is: 1 Oct 5 21:24:00 taoseeker kernel: [ 0.000000] nvram: OF partition at 0x410 Oct 5 21:24:00 taoseeker kernel: [ 0.000000] nvram: XP partition at 0x1020 Oct 5 21:24:00 taoseeker kernel: [ 0.000000] nvram: NR partition at 0x1120 Oct 5 21:24:00 taoseeker kernel: [ 0.000000] Top of RAM: 0x60000000, Total RAM: 0x60000000 Oct 5 21:24:00 taoseeker kernel: [ 0.000000] Memory hole size: 0MB Oct 5 21:24:00 taoseeker kernel: [ 0.000000] Zone ranges: Oct 5 21:24:00 taoseeker kernel: [ 0.000000] DMA [mem 0x00000000-0x2fffffff] Oct 5 21:24:00 taoseeker kernel: [ 0.000000] Normal empty Oct 5 21:24:00 taoseeker kernel: [ 0.000000] HighMem [mem 0x30000000-0x5fffffff] Oct 5 21:24:00 taoseeker kernel: [ 0.000000] Movable zone start for each node Oct 5 21:24:00 taoseeker kernel: [ 0.000000] Early memory node ranges Oct 5 21:24:00 taoseeker kernel: [ 0.000000] node 0: [mem 0x00000000-0x5fffffff] Oct 5 21:24:00 taoseeker kernel: [ 0.000000] On node 0 totalpages: 393216 Oct 5 21:24:00 taoseeker kernel: [ 0.000000] free_area_init_node: node 0, pgdat c091c220, node_mem_map c0abf000 Oct 5 21:24:00 taoseeker kernel: [ 0.000000] DMA zone: 1536 pages used for memmap Oct 5 21:24:00 taoseeker kernel: [ 0.000000] DMA zone: 0 pages reserved Oct 5 21:24:00 taoseeker kernel: [ 0.000000] DMA zone: 195072 pages, LIFO batch:31 Oct 5 21:24:00 taoseeker kernel: [ 0.000000] HighMem zone: 1536 pages used for memmap Oct 5 21:24:00 taoseeker kernel: [ 0.000000] HighMem zone: 195072 pages, LIFO batch:31 Oct 5 21:24:00 taoseeker kernel: [ 0.000000] PERCPU: Embedded 9 pages/cpu @c16c8000 s12832 r8192 d15840 u36864 Oct 5 21:24:00 taoseeker kernel: [ 0.000000] pcpu-alloc: s12832 r8192 d15840 u36864 alloc=9*4096 Oct 5 21:24:00 taoseeker kernel: [ 0.000000] pcpu-alloc: [0] 0 Oct 5 21:24:00 taoseeker kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 390144 Oct 5 21:24:00 taoseeker kernel: [ 0.000000] Kernel command line: root=UUID=2637ecb6-e215-4cbb-991f-e19d18210b06 ro quiet splash video=radeonfb:1024x768-32@60 Oct 5 21:24:00 taoseeker kernel: [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) Oct 5 21:24:00 taoseeker kernel: [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Oct 5 21:24:00 taoseeker kernel: [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Oct 5 21:24:00 taoseeker kernel: [ 0.000000] allocated 3145728 bytes of page_cgroup Oct 5 21:24:00 taoseeker kernel: [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups Oct 5 21:24:00 taoseeker kernel: [ 0.000000] High memory: 786432k Oct 5 21:24:00 taoseeker kernel: [ 0.000000] Memory: 1525688k/1572864k available (9032k kernel code, 47176k reserved, 396k data, 1521k bss, 384k init) Oct 5 21:24:00 taoseeker kernel: [ 0.000000] Kernel virtual memory layout: Oct 5 21:24:00 taoseeker kernel: [ 0.000000] * 0xfff9f000..0xfffff000 : fixmap Oct 5 21:24:00 taoseeker kernel: [ 0.000000] * 0xff800000..0xffc00000 : highmem PTEs Oct 5 21:24:00 taoseeker kernel: [ 0.000000] * 0xfdf32000..0xff800000 : early ioremap Oct 5 21:24:00 taoseeker kernel: [ 0.000000] * 0xf1000000..0xfdf32000 : vmalloc & ioremap Oct 5 21:24:00 taoseeker kernel: [ 0.000000] SLUB: Genslabs=15, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Oct 5 21:24:00 taoseeker kernel: [ 0.000000] Hierarchical RCU implementation. Oct 5 21:24:00 taoseeker kernel: [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. Oct 5 21:24:00 taoseeker kernel: [ 0.000000] NR_IRQS:512 nr_irqs:512 16 Oct 5 21:24:00 taoseeker kernel: [ 0.000000] mpic: Resetting Oct 5 21:24:00 taoseeker kernel: [ 0.000000] mpic: Setting up MPIC " MPIC 1 " version 1.2 at 80040000, max 1 CPUs Oct 5 21:24:00 taoseeker kernel: [ 0.000000] mpic: ISU size: 64, shift: 6, mask: 3f Oct 5 21:24:00 taoseeker kernel: [ 0.000000] mpic: Initializing for 64 sources Oct 5 21:24:00 taoseeker kernel: [ 0.000000] GMT Delta read from XPRAM: 0 minutes, DST: off Oct 5 21:24:00 taoseeker kernel: [ 0.000000] time_init: decrementer frequency = 18.432000 MHz Oct 5 21:24:00 taoseeker kernel: [ 0.000000] time_init: processor frequency = 1420.000000 MHz Oct 5 21:24:00 taoseeker kernel: [ 0.000000] clocksource: timebase mult[3640e38e] shift[24] registered Oct 5 21:24:00 taoseeker kernel: [ 0.000000] clockevent: decrementer mult[4b7f5a5] shift[32] cpu[0] Oct 5 21:24:00 taoseeker kernel: [ 0.000000] Console: colour dummy device 80x25 Oct 5 21:24:00 taoseeker kernel: [ 0.000000] console [tty0] enabled, bootconsole disabled Oct 5 21:24:00 taoseeker kernel: [ 0.000433] pid_max: default: 32768 minimum: 301 Oct 5 21:24:00 taoseeker kernel: [ 0.000549] Security Framework initialized Oct 5 21:24:00 taoseeker kernel: [ 0.000646] AppArmor: AppArmor initialized Oct 5 21:24:00 taoseeker kernel: [ 0.000652] Yama: becoming mindful. Oct 5 21:24:00 taoseeker kernel: [ 0.000744] Mount-cache hash table entries: 512 Oct 5 21:24:00 taoseeker kernel: [ 0.001379] device-tree: Duplicate name in /cpus/PowerPC,G4@0, renamed to "l2-cache#1" Oct 5 21:24:00 taoseeker kernel: [ 0.007008] Initializing cgroup subsys cpuacct Oct 5 21:24:00 taoseeker kernel: [ 0.007022] Initializing cgroup subsys memory Oct 5 21:24:00 taoseeker kernel: [ 0.007054] Initializing cgroup subsys devices Oct 5 21:24:00 taoseeker kernel: [ 0.007062] Initializing cgroup subsys freezer Oct 5 21:24:00 taoseeker kernel: [ 0.007069] Initializing cgroup subsys blkio Oct 5 21:24:00 taoseeker kernel: [ 0.007076] Initializing cgroup subsys perf_event Oct 5 21:24:00 taoseeker kernel: [ 0.007186] ftrace: allocating 21198 entries in 63 pages Oct 5 21:24:00 taoseeker kernel: [ 0.040003] PowerMac SMP probe found 1 cpus Oct 5 21:24:00 taoseeker kernel: [ 0.040022] MPC7450 family performance monitor hardware support registered Oct 5 21:24:00 taoseeker kernel: [ 0.040751] Brought up 1 CPUs Oct 5 21:24:00 taoseeker kernel: [ 0.041395] devtmpfs: initialized Oct 5 21:24:00 taoseeker kernel: [ 0.041767] EVM: security.selinux Oct 5 21:24:00 taoseeker kernel: [ 0.041773] EVM: security.SMACK64 Oct 5 21:24:00 taoseeker kernel: [ 0.041778] EVM: security.capability Oct 5 21:24:00 taoseeker kernel: [ 0.044609] dummy: Oct 5 21:24:00 taoseeker kernel: [ 0.044837] NET: Registered protocol family 16 Oct 5 21:24:00 taoseeker kernel: [ 0.045839] KeyWest i2c @0xf8001003 irq 42 /uni-n@f8000000/i2c@f8001000 Oct 5 21:24:00 taoseeker kernel: [ 0.045852] channel 1 bus /uni-n@f8000000/i2c@f8001000/i2c-bus@1 Oct 5 21:24:00 taoseeker kernel: [ 0.045963] KeyWest i2c @0x80018000 irq 26 /pci@f2000000/mac-io@17/i2c@18000 Oct 5 21:24:00 taoseeker kernel: [ 0.045972] channel 0 bus /pci@f2000000/mac-io@17/i2c@18000/i2c-bus@0 Oct 5 21:24:00 taoseeker kernel: [ 0.045991] PMU i2c /pci@f2000000/mac-io@17/via-pmu@16000/pmu-i2c Oct 5 21:24:00 taoseeker kernel: [ 0.045998] channel 1 bus Oct 5 21:24:00 taoseeker kernel: [ 0.046012] channel 2 bus Oct 5 21:24:00 taoseeker kernel: [ 0.046597] PCI: Probing PCI hardware Oct 5 21:24:00 taoseeker kernel: [ 0.046696] PCI host bridge to bus 0000:00 Oct 5 21:24:00 taoseeker kernel: [ 0.046716] pci_bus 0000:00: >root bus resource [io 0x802000-0x1001fff] (bus address [0x0000-0x7fffff]) Oct 5 21:24:00 taoseeker kernel: [ 0.046727] pci_bus 0000:00: >root bus resource [mem 0xf1000000-0xf1ffffff] Oct 5 21:24:00 taoseeker kernel: [ 0.046737] pci_bus 0000:00: >root bus resource [mem 0x90000000-0x9fffffff] Oct 5 21:24:00 taoseeker kernel: [ 0.046791] pci 0000:00:0b.0: >[106b:0034] type 00 class 0x060000 Oct 5 21:24:00 taoseeker kernel: [ 0.046916] pci 0000:00:10.0: >[1002:4e56] type 00 class 0x030000 Oct 5 21:24:00 taoseeker kernel: [ 0.046946] pci 0000:00:10.0: >reg 10: [mem 0x98000000-0x9fffffff pref] Oct 5 21:24:00 taoseeker kernel: [ 0.046962] pci 0000:00:10.0: >reg 14: [io 0x802400-0x8024ff] Oct 5 21:24:00 taoseeker kernel: [ 0.046979] pci 0000:00:10.0: >reg 18: [mem 0x90000000-0x9000ffff] Oct 5 21:24:00 taoseeker kernel: [ 0.047016] pci 0000:00:10.0: >reg 30: [mem 0x90020000-0x9003ffff pref] Oct 5 21:24:00 taoseeker kernel: [ 0.047065] pci 0000:00:10.0: >supports D1 D2 Oct 5 21:24:00 taoseeker kernel: [ 0.047447] PCI host bridge to bus 0001:10 Oct 5 21:24:00 taoseeker kernel: [ 0.047458] pci_bus 0001:10: >root bus resource [io 0x0000-0x7fffff] Oct 5 21:24:00 taoseeker kernel: [ 0.047468] pci_bus 0001:10: >root bus resource [mem 0xf3000000-0xf3ffffff] Oct 5 21:24:00 taoseeker kernel: [ 0.047478] pci_bus 0001:10: >root bus resource [mem 0x80000000-0x8fffffff] Oct 5 21:24:00 taoseeker kernel: [ 0.047525] pci 0001:10:0b.0: >[106b:0035] type 00 class 0x060000 Oct 5 21:24:00 taoseeker kernel: [ 0.047616] pci 0001:10:12.0: >[14e4:4318] type 00 class 0x028000 Oct 5 21:24:00 taoseeker kernel: [ 0.047639] pci 0001:10:12.0: >reg 10: [mem 0x80084000-0x80085fff] Oct 5 21:24:00 taoseeker kernel: [ 0.047734] pci 0001:10:17.0: >[106b:003e] type 00 class 0xff0000 Oct 5 21:24:00 taoseeker kernel: [ 0.047755] pci 0001:10:17.0: >reg 10: [mem 0x80000000-0x8007ffff] Oct 5 21:24:00 taoseeker kernel: [ 0.047914] pci 0001:10:18.0: >[106b:003f] type 00 class 0x0c0310 Oct 5 21:24:00 taoseeker kernel: [ 0.047939] pci 0001:10:18.0: >reg 10: [mem 0x00000000-0x00000fff] Oct 5 21:24:00 taoseeker kernel: [ 0.048043] pci 0001:10:19.0: >[106b:003f] type 00 class 0x0c0310 Oct 5 21:24:00 taoseeker kernel: [ 0.048065] pci 0001:10:19.0: >reg 10: [mem 0x00000000-0x00000fff] Oct 5 21:24:00 taoseeker kernel: [ 0.048155] pci 0001:10:1a.0: >[106b:003f] type 00 class 0x0c0310 Oct 5 21:24:00 taoseeker kernel: [ 0.048178] pci 0001:10:1a.0: >reg 10: [mem 0x80083000-0x80083fff] Oct 5 21:24:00 taoseeker kernel: [ 0.048272] pci 0001:10:1b.0: >[1033:0035] type 00 class 0x0c0310 Oct 5 21:24:00 taoseeker kernel: [ 0.048298] pci 0001:10:1b.0: >reg 10: [mem 0x80082000-0x80082fff] Oct 5 21:24:00 taoseeker kernel: [ 0.048387] pci 0001:10:1b.0: >supports D1 D2 Oct 5 21:24:00 taoseeker kernel: [ 0.048396] pci 0001:10:1b.0: >PME# supported from D0 D1 D2 D3hot D3cold Oct 5 21:24:00 taoseeker kernel: [ 0.048438] pci 0001:10:1b.1: >[1033:0035] type 00 class 0x0c0310 Oct 5 21:24:00 taoseeker kernel: [ 0.048465] pci 0001:10:1b.1: >reg 10: [mem 0x80081000-0x80081fff] Oct 5 21:24:00 taoseeker kernel: [ 0.048553] pci 0001:10:1b.1: >supports D1 D2 Oct 5 21:24:00 taoseeker kernel: [ 0.048562] pci 0001:10:1b.1: >PME# supported from D0 D1 D2 D3hot D3cold Oct 5 21:24:00 taoseeker kernel: [ 0.048603] pci 0001:10:1b.2: >[1033:00e0] type 00 class 0x0c0320 Oct 5 21:24:00 taoseeker kernel: [ 0.048630] pci 0001:10:1b.2: >reg 10: [mem 0x80080000-0x800800ff] Oct 5 21:24:00 taoseeker kernel: [ 0.048718] pci 0001:10:1b.2: >supports D1 D2 Oct 5 21:24:00 taoseeker kernel: [ 0.048727] pci 0001:10:1b.2: >PME# supported from D0 D1 D2 D3hot D3cold Oct 5 21:24:00 taoseeker kernel: [ 0.050005] PCI host bridge to bus 0002:20 Oct 5 21:24:00 taoseeker kernel: [ 0.050021] pci_bus 0002:20: >root bus resource [io 0xff7fe000-0xffffdfff] (bus address [0x0000-0x7fffff]) Oct 5 21:24:00 taoseeker kernel: [ 0.050031] pci_bus 0002:20: >root bus resource [mem 0xf5000000-0xf5ffffff] Oct 5 21:24:00 taoseeker kernel: [ 0.050077] pci 0002:20:0b.0: >[106b:0036] type 00 class 0x060000 Oct 5 21:24:00 taoseeker kernel: [ 0.050150] pci 0002:20:0d.0: >[106b:003b] type 00 class 0xff0000 Oct 5 21:24:00 taoseeker kernel: [ 0.050170] pci 0002:20:0d.0: >reg 10: [mem 0xf5004000-0xf5007fff] Oct 5 21:24:00 taoseeker kernel: [ 0.050250] pci 0002:20:0e.0: >[106b:0031] type 00 class 0x0c0010 Oct 5 21:24:00 taoseeker kernel: [ 0.050273] pci 0002:20:0e.0: >reg 10: [mem 0xf5000000-0xf5000fff] Oct 5 21:24:00 taoseeker kernel: [ 0.050347] pci 0002:20:0e.0: >supports D1 D2 Oct 5 21:24:00 taoseeker kernel: [ 0.050356] pci 0002:20:0e.0: >PME# supported from D0 D1 D2 D3hot Oct 5 21:24:00 taoseeker kernel: [ 0.050401] pci 0002:20:0f.0: >[106b:0032] type 00 class 0x020000 Oct 5 21:24:00 taoseeker kernel: [ 0.050422] pci 0002:20:0f.0: >reg 10: [mem 0xf5200000-0xf53fffff] Oct 5 21:24:00 taoseeker kernel: [ 0.050470] pci 0002:20:0f.0: >reg 30: [mem 0xf5100000-0xf51fffff pref] Oct 5 21:24:00 taoseeker kernel: [ 0.051260] PCI 0000:00 Cannot reserve Legacy IO [io 0x802000-0x802fff] Oct 5 21:24:00 taoseeker kernel: [ 0.051332] pci_bus 0000:00: >resource 4 [io 0x802000-0x1001fff] Oct 5 21:24:00 taoseeker kernel: [ 0.051341] pci_bus 0000:00: >resource 5 [mem 0xf1000000-0xf1ffffff] Oct 5 21:24:00 taoseeker kernel: [ 0.051351] pci_bus 0000:00: >resource 6 [mem 0x90000000-0x9fffffff] Oct 5 21:24:00 taoseeker kernel: [ 0.051361] pci_bus 0001:10: >resource 4 [io 0x0000-0x7fffff] Oct 5 21:24:00 taoseeker kernel: [ 0.051371] pci_bus 0001:10: >resource 5 [mem 0xf3000000-0xf3ffffff] Oct 5 21:24:00 taoseeker kernel: [ 0.051380] pci_bus 0001:10: >resource 6 [mem 0x80000000-0x8fffffff] Oct 5 21:24:00 taoseeker kernel: [ 0.051391] pci_bus 0002:20: >resource 4 [io 0xff7fe000-0xffffdfff] Oct 5 21:24:00 taoseeker kernel: [ 0.051400] pci_bus 0002:20: >resource 5 [mem 0xf5000000-0xf5ffffff] Oct 5 21:24:00 taoseeker kernel: [ 0.055497] bio: create slab at 0 Oct 5 21:24:00 taoseeker kernel: [ 0.056391] vgaarb: device added: PCI:0000:00:10.0,decodes=io+mem,owns=mem,locks=none Oct 5 21:24:00 taoseeker kernel: [ 0.056439] vgaarb: loaded Oct 5 21:24:00 taoseeker kernel: [ 0.056444] vgaarb: bridge control possible 0000:00:10.0 Oct 5 21:24:00 taoseeker kernel: [ 0.057402] SCSI subsystem initialized Oct 5 21:24:00 taoseeker kernel: [ 0.057560] libata version 3.00 loaded. Oct 5 21:24:00 taoseeker kernel: [ 0.057740] usbcore: registered new interface driver usbfs Oct 5 21:24:00 taoseeker kernel: [ 0.057783] usbcore: registered new interface driver hub Oct 5 21:24:00 taoseeker kernel: [ 0.057874] usbcore: registered new device driver usb Oct 5 21:24:00 taoseeker kernel: [ 0.058611] NetLabel: Initializing Oct 5 21:24:00 taoseeker kernel: [ 0.058619] NetLabel: domain hash size = 128 Oct 5 21:24:00 taoseeker kernel: [ 0.058624] NetLabel: protocols = UNLABELED CIPSOv4 Oct 5 21:24:00 taoseeker kernel: [ 0.058669] NetLabel: unlabeled traffic allowed by default Oct 5 21:24:00 taoseeker kernel: [ 0.058888] Switching to clocksource timebase Oct 5 21:24:00 taoseeker kernel: [ 0.074644] AppArmor: AppArmor Filesystem Enabled Oct 5 21:24:00 taoseeker kernel: [ 0.081446] NET: Registered protocol family 2 Oct 5 21:24:00 taoseeker kernel: [ 0.081634] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) Oct 5 21:24:00 taoseeker kernel: [ 0.082309] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) Oct 5 21:24:00 taoseeker kernel: [ 0.084817] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) Oct 5 21:24:00 taoseeker kernel: [ 0.086021] TCP: Hash tables configured (established 131072 bind 65536) Oct 5 21:24:00 taoseeker kernel: [ 0.086029] TCP: reno registered Oct 5 21:24:00 taoseeker kernel: [ 0.086043] UDP hash table entries: 512 (order: 2, 16384 bytes) Oct 5 21:24:00 taoseeker kernel: [ 0.086111] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) Oct 5 21:24:00 taoseeker kernel: [ 0.086454] NET: Registered protocol family 1 Oct 5 21:24:00 taoseeker kernel: [ 0.086550] Apple USB OHCI 0001:10:18.0 disabled by firmware Oct 5 21:24:00 taoseeker kernel: [ 0.086565] pci 0001:10:18.0: >Can't enable PCI device, BIOS handoff failed. Oct 5 21:24:00 taoseeker kernel: [ 0.086580] Apple USB OHCI 0001:10:19.0 disabled by firmware Oct 5 21:24:00 taoseeker kernel: [ 0.086588] pci 0001:10:19.0: >Can't enable PCI device, BIOS handoff failed. Oct 5 21:24:00 taoseeker kernel: [ 0.086614] pci 0001:10:1a.0: >enabling device (0000 -> 0002) Oct 5 21:24:00 taoseeker kernel: [ 0.139041] pci 0001:10:1b.0: >enabling device (0000 -> 0002) Oct 5 21:24:00 taoseeker kernel: [ 0.194968] pci 0001:10:1b.1: >enabling device (0000 -> 0002) Oct 5 21:24:00 taoseeker kernel: [ 0.250963] pci 0001:10:1b.2: >enabling device (0004 -> 0006) Oct 5 21:24:00 taoseeker kernel: [ 0.251017] PCI: CLS mismatch (32 != 1020), using 32 bytes Oct 5 21:24:00 taoseeker kernel: [ 0.251566] Thermal assist unit not available Oct 5 21:24:00 taoseeker kernel: [ 0.251707] Registering PowerMac CPU frequency driver Oct 5 21:24:00 taoseeker kernel: [ 0.251714] Low: 710 Mhz, High: 1420 Mhz, Boot: 710 Mhz Oct 5 21:24:00 taoseeker kernel: [ 0.252057] Trying to unpack rootfs image as initramfs... Oct 5 21:24:00 taoseeker kernel: [ 0.260322] audit: initializing netlink socket (disabled) Oct 5 21:24:00 taoseeker kernel: [ 0.260363] type=2000 audit(1349465017.244:1): initialized Oct 5 21:24:00 taoseeker kernel: [ 0.375324] highmem bounce pool size: 64 pages Oct 5 21:24:00 taoseeker kernel: [ 0.383127] VFS: Disk quotas dquot_6.5.2 Oct 5 21:24:00 taoseeker kernel: [ 0.383285] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Oct 5 21:24:00 taoseeker kernel: [ 0.384519] fuse init (API version 7.19) Oct 5 21:24:00 taoseeker kernel: [ 0.384720] msgmni has been set to 1445 Oct 5 21:24:00 taoseeker kernel: [ 0.399274] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) Oct 5 21:24:00 taoseeker kernel: [ 0.399423] io scheduler noop registered Oct 5 21:24:00 taoseeker kernel: [ 0.399428] io scheduler deadline registered (default) Oct 5 21:24:00 taoseeker kernel: [ 0.399466] io scheduler cfq registered Oct 5 21:24:00 taoseeker kernel: [ 0.399698] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Oct 5 21:24:00 taoseeker kernel: [ 0.399721] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 Oct 5 21:24:00 taoseeker kernel: [ 0.399896] radeonfb 0000:00:10.0: >enabling device (0006 -> 0007) Oct 5 21:24:00 taoseeker kernel: [ 0.667412] radeonfb 0000:00:10.0: >Invalid ROM contents Oct 5 21:24:00 taoseeker kernel: [ 0.667432] radeonfb (0000:00:10.0): Invalid ROM signature 0 should be 0xaa55 Oct 5 21:24:00 taoseeker kernel: [ 0.667442] radeonfb: Retrieved PLL infos from Open Firmware Oct 5 21:24:00 taoseeker kernel: [ 0.667449] radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=183.00 Mhz, System=210.00 MHz Oct 5 21:24:00 taoseeker kernel: [ 0.667452] radeonfb: PLL min 12000 max 35000 Oct 5 21:24:00 taoseeker kernel: [ 0.764083] i2c i2c-2: >unable to read EDID block. Oct 5 21:24:00 taoseeker kernel: [ 0.916216] i2c i2c-2: >unable to read EDID block. Oct 5 21:24:00 taoseeker kernel: [ 1.036292] Freeing initrd memory: 15488k freed Oct 5 21:24:00 taoseeker kernel: [ 1.067983] i2c i2c-2: >unable to read EDID block. Oct 5 21:24:00 taoseeker kernel: [ 1.423911] radeonfb: Monitor 1 type LCD found Oct 5 21:24:00 taoseeker kernel: [ 1.423914] radeonfb: EDID probed Oct 5 21:24:00 taoseeker kernel: [ 1.423917] radeonfb: Monitor 2 type no found Oct 5 21:24:00 taoseeker kernel: [ 1.423929] radeonfb: Using Firmware dividers 0x00020074 from PPLL 0 Oct 5 21:24:00 taoseeker kernel: [ 1.424019] radeonfb: Dynamic Clock Power Management enabled Oct 5 21:24:00 taoseeker kernel: [ 1.494997] Console: switching to colour frame buffer device 128x48 Oct 5 21:24:00 taoseeker kernel: [ 1.555069] radeonfb: Backlight initialized (radeonbl0) Oct 5 21:24:00 taoseeker kernel: [ 1.555074] radeonfb (0000:00:10.0): ATI Radeon 4e56 "NV" Oct 5 21:24:00 taoseeker kernel: [ 1.556012] pmac_zilog: 0.6 (Benjamin Herrenschmidt ) Oct 5 21:24:00 taoseeker kernel: [ 1.556128] Generic non-volatile memory driver v1.1 Oct 5 21:24:00 taoseeker kernel: [ 1.556179] Linux agpgart interface v0.103 Oct 5 21:24:00 taoseeker kernel: [ 1.559219] brd: module loaded Oct 5 21:24:00 taoseeker kernel: [ 1.560951] loop: module loaded Oct 5 21:24:00 taoseeker kernel: [ 1.561140] MacIO PCI driver attached to Intrepid chipset Oct 5 21:24:00 taoseeker kernel: [ 1.561980] 0.00013020:ch-a: ttyPZ0 at MMIO 0x80013020 (irq = 22) is a Z85c30 ESCC - Serial port Oct 5 21:24:00 taoseeker kernel: [ 1.562242] 0.00013000:ch-b: ttyPZ1 at MMIO 0x80013000 (irq = 23) is a Z85c30 ESCC - Serial port Oct 5 21:24:00 taoseeker kernel: [ 1.563104] pata-pci-macio 0002:20:0d.0: >enabling device (0000 -> 0002) Oct 5 21:24:00 taoseeker kernel: [ 1.563282] adb: starting probe task... Oct 5 21:24:00 taoseeker kernel: [ 1.579061] pata-pci-macio 0002:20:0d.0: >Activating pata-macio chipset UniNorth ATA-6, Apple bus ID 3 Oct 5 21:24:00 taoseeker kernel: [ 1.579432] scsi0 : pata_macio Oct 5 21:24:00 taoseeker kernel: [ 1.579561] ata1: PATA max UDMA/100 irq 39 Oct 5 21:24:00 taoseeker kernel: [ 1.589239] adb devices: [2]: 2 c4 [7]: 7 1f Oct 5 21:24:00 taoseeker kernel: [ 1.594702] ADB keyboard at 2, handler 1 Oct 5 21:24:00 taoseeker kernel: [ 1.594716] Detected ADB keyboard, type ISO, swapping keys. Oct 5 21:24:00 taoseeker kernel: [ 1.594816] input: ADB keyboard as /devices/virtual/input/input0 Oct 5 21:24:00 taoseeker kernel: [ 1.594936] input: ADB Powerbook buttons as /devices/virtual/input/input1 Oct 5 21:24:00 taoseeker kernel: [ 1.594944] adb: finished probe task... Oct 5 21:24:00 taoseeker kernel: [ 1.743336] ata1.00: ATA-7: FUJITSU MHV2060AT, 008100A0, max UDMA/100 Oct 5 21:24:00 taoseeker kernel: [ 1.743343] ata1.00: 117210240 sectors, multi 16: LBA48 Oct 5 21:24:00 taoseeker kernel: [ 1.759232] ata1.00: configured for UDMA/100 Oct 5 21:24:00 taoseeker kernel: [ 1.759534] scsi 0:0:0:0: >Direct-Access ATA FUJITSU MHV2060A 0081 PQ: 0 ANSI: 5 Oct 5 21:24:00 taoseeker kernel: [ 1.759937] sd 0:0:0:0: >Attached scsi generic sg0 type 0 Oct 5 21:24:00 taoseeker kernel: [ 1.760166] sd 0:0:0:0: >[sda] 117210240 512-byte logical blocks: (60.0 GB/55.8 GiB) Oct 5 21:24:00 taoseeker kernel: [ 1.760291] sd 0:0:0:0: >[sda] Write Protect is off Oct 5 21:24:00 taoseeker kernel: [ 1.760298] sd 0:0:0:0: >[sda] Mode Sense: 00 3a 00 00 Oct 5 21:24:00 taoseeker kernel: [ 1.760348] sd 0:0:0:0: >[sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Oct 5 21:24:00 taoseeker kernel: [ 1.859173] sda: [mac] sda1 sda2 sda3 sda4 sda5 Oct 5 21:24:00 taoseeker kernel: [ 1.860004] sd 0:0:0:0: >[sda] Attached SCSI disk Oct 5 21:24:00 taoseeker kernel: [ 2.598958] pata-macio 0.00020000:ata-3: >Activating pata-macio chipset KeyLargo ATA-3, Apple bus ID 0 Oct 5 21:24:00 taoseeker kernel: [ 2.599345] scsi1 : pata_macio Oct 5 21:24:00 taoseeker kernel: [ 2.599432] ata2: PATA max MWDMA2 irq 24 Oct 5 21:24:00 taoseeker kernel: [ 2.600047] Fixed MDIO Bus: probed Oct 5 21:24:00 taoseeker kernel: [ 2.600156] tun: Universal TUN/TAP device driver, 1.6 Oct 5 21:24:00 taoseeker kernel: [ 2.600159] tun: (C) 1999-2004 Max Krasnyansky Oct 5 21:24:00 taoseeker kernel: [ 2.600280] PPP generic driver version 2.4.2 Oct 5 21:24:00 taoseeker kernel: [ 2.600385] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Oct 5 21:24:00 taoseeker kernel: [ 2.600482] ehci_hcd 0001:10:1b.2: >EHCI Host Controller Oct 5 21:24:00 taoseeker kernel: [ 2.600508] ehci_hcd 0001:10:1b.2: >new USB bus registered, assigned bus number 1 Oct 5 21:24:00 taoseeker kernel: [ 2.623045] ehci_hcd 0001:10:1b.2: >irq 63, io mem 0x80080000 Oct 5 21:24:00 taoseeker kernel: [ 2.634952] ehci_hcd 0001:10:1b.2: >USB 2.0 started, EHCI 1.00 Oct 5 21:24:00 taoseeker kernel: [ 2.635015] usb usb1: >New USB device found, idVendor=1d6b, idProduct=0002 Oct 5 21:24:00 taoseeker kernel: [ 2.635020] usb usb1: >New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 5 21:24:00 taoseeker kernel: [ 2.635026] usb usb1: >Product: EHCI Host Controller Oct 5 21:24:00 taoseeker kernel: [ 2.635030] usb usb1: >Manufacturer: Linux 3.5.0-17-powerpc-smp ehci_hcd Oct 5 21:24:00 taoseeker kernel: [ 2.635035] usb usb1: >SerialNumber: 0001:10:1b.2 Oct 5 21:24:00 taoseeker kernel: [ 2.635301] hub 1-0:1.0: >USB hub found Oct 5 21:24:00 taoseeker kernel: [ 2.635314] hub 1-0:1.0: >5 ports detected Oct 5 21:24:00 taoseeker kernel: [ 2.635548] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver Oct 5 21:24:00 taoseeker kernel: [ 2.635601] Apple USB OHCI 0001:10:18.0 disabled by firmware Oct 5 21:24:00 taoseeker kernel: [ 2.635622] Apple USB OHCI 0001:10:19.0 disabled by firmware Oct 5 21:24:00 taoseeker kernel: [ 2.635656] ohci_hcd 0001:10:1a.0: >OHCI Host Controller Oct 5 21:24:00 taoseeker kernel: [ 2.635669] ohci_hcd 0001:10:1a.0: >new USB bus registered, assigned bus number 2 Oct 5 21:24:00 taoseeker kernel: [ 2.635710] ohci_hcd 0001:10:1a.0: >irq 29, io mem 0x80083000 Oct 5 21:24:00 taoseeker kernel: [ 2.710532] usb usb2: >New USB device found, idVendor=1d6b, idProduct=0001 Oct 5 21:24:00 taoseeker kernel: [ 2.710539] usb usb2: >New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 5 21:24:00 taoseeker kernel: [ 2.710544] usb usb2: >Product: OHCI Host Controller Oct 5 21:24:00 taoseeker kernel: [ 2.710548] usb usb2: >Manufacturer: Linux 3.5.0-17-powerpc-smp ohci_hcd Oct 5 21:24:00 taoseeker kernel: [ 2.710553] usb usb2: >SerialNumber: 0001:10:1a.0 Oct 5 21:24:00 taoseeker kernel: [ 2.710789] hub 2-0:1.0: >USB hub found Oct 5 21:24:00 taoseeker kernel: [ 2.710801] hub 2-0:1.0: >2 ports detected Oct 5 21:24:00 taoseeker kernel: [ 2.710947] ohci_hcd 0001:10:1b.0: >OHCI Host Controller Oct 5 21:24:00 taoseeker kernel: [ 2.710960] ohci_hcd 0001:10:1b.0: >new USB bus registered, assigned bus number 3 Oct 5 21:24:00 taoseeker kernel: [ 2.710982] ohci_hcd 0001:10:1b.0: >irq 63, io mem 0x80082000 Oct 5 21:24:00 taoseeker kernel: [ 2.763314] ata2.00: ATAPI: MATSHITADVD-R UJ-845E, DMP2, max UDMA/66 Oct 5 21:24:00 taoseeker kernel: [ 2.786595] usb usb3: >New USB device found, idVendor=1d6b, idProduct=0001 Oct 5 21:24:00 taoseeker kernel: [ 2.786601] usb usb3: >New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 5 21:24:00 taoseeker kernel: [ 2.786606] usb usb3: >Product: OHCI Host Controller Oct 5 21:24:00 taoseeker kernel: [ 2.786611] usb usb3: >Manufacturer: Linux 3.5.0-17-powerpc-smp ohci_hcd Oct 5 21:24:00 taoseeker kernel: [ 2.786615] usb usb3: >SerialNumber: 0001:10:1b.0 Oct 5 21:24:00 taoseeker kernel: [ 2.786824] hub 3-0:1.0: >USB hub found Oct 5 21:24:00 taoseeker kernel: [ 2.786837] hub 3-0:1.0: >3 ports detected Oct 5 21:24:00 taoseeker kernel: [ 2.786983] ohci_hcd 0001:10:1b.1: >OHCI Host Controller Oct 5 21:24:00 taoseeker kernel: [ 2.786996] ohci_hcd 0001:10:1b.1: >new USB bus registered, assigned bus number 4 Oct 5 21:24:00 taoseeker kernel: [ 2.787023] ohci_hcd 0001:10:1b.1: >irq 63, io mem 0x80081000 Oct 5 21:24:00 taoseeker kernel: [ 2.795289] ata2.00: configured for MWDMA2 Oct 5 21:24:00 taoseeker kernel: [ 2.799705] scsi 1:0:0:0: >CD-ROM MATSHITA DVD-R UJ-845E DMP2 PQ: 0 ANSI: 5 Oct 5 21:24:00 taoseeker kernel: [ 2.801664] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray Oct 5 21:24:00 taoseeker kernel: [ 2.801670] cdrom: Uniform CD-ROM driver Revision: 3.20 Oct 5 21:24:00 taoseeker kernel: [ 2.801898] sr 1:0:0:0: >Attached scsi CD-ROM sr0 Oct 5 21:24:00 taoseeker kernel: [ 2.802016] sr 1:0:0:0: >Attached scsi generic sg1 type 5 Oct 5 21:24:00 taoseeker kernel: [ 2.862522] usb usb4: >New USB device found, idVendor=1d6b, idProduct=0001 Oct 5 21:24:00 taoseeker kernel: [ 2.862528] usb usb4: >New USB device strings: Mfr=3, Product=2, SerialNumber=1 Oct 5 21:24:00 taoseeker kernel: [ 2.862534] usb usb4: >Product: OHCI Host Controller Oct 5 21:24:00 taoseeker kernel: [ 2.862538] usb usb4: >Manufacturer: Linux 3.5.0-17-powerpc-smp ohci_hcd Oct 5 21:24:00 taoseeker kernel: [ 2.862543] usb usb4: >SerialNumber: 0001:10:1b.1 Oct 5 21:24:00 taoseeker kernel: [ 2.862783] hub 4-0:1.0: >USB hub found Oct 5 21:24:00 taoseeker kernel: [ 2.862797] hub 4-0:1.0: >2 ports detected Oct 5 21:24:00 taoseeker kernel: [ 2.862984] uhci_hcd: USB Universal Host Controller Interface driver Oct 5 21:24:00 taoseeker kernel: [ 2.863190] usbcore: registered new interface driver libusual Oct 5 21:24:00 taoseeker kernel: [ 2.863548] mousedev: PS/2 mouse device common for all mice Oct 5 21:24:00 taoseeker kernel: [ 2.863830] PowerMac i2c bus pmu 2 registered Oct 5 21:24:00 taoseeker kernel: [ 2.863891] PowerMac i2c bus pmu 1 registered Oct 5 21:24:00 taoseeker kernel: [ 2.863950] PowerMac i2c bus mac-io 0 registered Oct 5 21:24:00 taoseeker kernel: [ 2.864088] PowerMac i2c bus uni-n 1 registered Oct 5 21:24:00 taoseeker kernel: [ 2.864145] adt746x: version 1 (supported) Oct 5 21:24:00 taoseeker kernel: [ 2.864150] sensor 0: PWR/MEMORY BOTTOMSIDE Oct 5 21:24:00 taoseeker kernel: [ 2.864153] sensor 1: CPU BOTTOMSIDE Oct 5 21:24:00 taoseeker kernel: [ 2.864156] sensor 2: GPU BOTTOMSIDE Oct 5 21:24:00 taoseeker kernel: [ 2.864586] adt746x: ADT7467 initializing Oct 5 21:24:00 taoseeker kernel: [ 2.866690] adt746x: Lowering max temperatures from 69, 92, 101 to 70, 50, 70 Oct 5 21:24:00 taoseeker kernel: [ 2.868919] device-mapper: uevent: version 1.0.3 Oct 5 21:24:00 taoseeker kernel: [ 2.869087] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com Oct 5 21:24:00 taoseeker kernel: [ 2.869101] cpuidle: using governor ladder Oct 5 21:24:00 taoseeker kernel: [ 2.869105] cpuidle: using governor menu Oct 5 21:24:00 taoseeker kernel: [ 2.869338] ashmem: initialized Oct 5 21:24:00 taoseeker kernel: [ 2.869577] TCP: cubic registered Oct 5 21:24:00 taoseeker kernel: [ 2.869845] NET: Registered protocol family 10 Oct 5 21:24:00 taoseeker kernel: [ 2.870251] NET: Registered protocol family 17 Oct 5 21:24:00 taoseeker kernel: [ 2.870284] Key type dns_resolver registered Oct 5 21:24:00 taoseeker kernel: [ 2.870652] registered taskstats version 1 Oct 5 21:24:00 taoseeker kernel: [ 2.878869] Key type trusted registered Oct 5 21:24:00 taoseeker kernel: [ 2.886197] Key type encrypted registered Oct 5 21:24:00 taoseeker kernel: [ 2.893788] input: PMU as /devices/virtual/input/input2 Oct 5 21:24:00 taoseeker kernel: [ 2.893961] Registered led device: pmu-led::front Oct 5 21:24:00 taoseeker kernel: [ 2.893971] /build/buildd/linux-3.5.0/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) Oct 5 21:24:00 taoseeker kernel: [ 2.894756] Freeing unused kernel memory: 384k freed Oct 5 21:24:00 taoseeker kernel: [ 3.047046] usb 2-1: >new full-speed USB device number 2 using ohci_hcd Oct 5 21:24:00 taoseeker kernel: [ 3.257048] usb 2-1: >New USB device found, idVendor=05ac, idProduct=1000 Oct 5 21:24:00 taoseeker kernel: [ 3.257061] usb 2-1: >New USB device strings: Mfr=0, Product=0, SerialNumber=0 Oct 5 21:24:00 taoseeker kernel: [ 3.320648] b43-pci-bridge 0001:10:12.0: >enabling device (0004 -> 0006) Oct 5 21:24:00 taoseeker kernel: [ 3.359077] ssb: Found chip with id 0x4318, rev 0x02 and package 0x02 Oct 5 21:24:00 taoseeker kernel: [ 3.359095] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x0D, vendor 0x4243) Oct 5 21:24:00 taoseeker kernel: [ 3.359102] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x09, vendor 0x4243) Oct 5 21:24:00 taoseeker kernel: [ 3.359109] ssb: Core 2 found: PCI (cc 0x804, rev 0x0C, vendor 0x4243) Oct 5 21:24:00 taoseeker kernel: [ 3.359116] ssb: Core 3 found: PCMCIA (cc 0x80D, rev 0x07, vendor 0x4243) Oct 5 21:24:00 taoseeker kernel: [ 3.395043] usb 2-2: >new full-speed USB device number 3 using ohci_hcd Oct 5 21:24:00 taoseeker kernel: [ 3.407710] ssb: Sonics Silicon Backplane found on PCI device 0001:10:12.0 Oct 5 21:24:00 taoseeker kernel: [ 3.496518] sungem.c:v1.0 David S. Miller Oct 5 21:24:00 taoseeker kernel: [ 3.497117] gem 0002:20:0f.0: >eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:11:24:d5:aa:bc Oct 5 21:24:00 taoseeker kernel: [ 3.523626] firewire_ohci 0002:20:0e.0: >enabling device (0000 -> 0002) Oct 5 21:24:00 taoseeker kernel: [ 3.576027] usb 2-2: >New USB device found, idVendor=05ac, idProduct=030b Oct 5 21:24:00 taoseeker kernel: [ 3.576040] usb 2-2: >New USB device strings: Mfr=1, Product=2, SerialNumber=0 Oct 5 21:24:00 taoseeker kernel: [ 3.576045] usb 2-2: >Product: Apple Internal Trackpad Oct 5 21:24:00 taoseeker kernel: [ 3.576050] usb 2-2: >Manufacturer: Apple Computer Oct 5 21:24:00 taoseeker kernel: [ 3.579548] firewire_ohci 0002:20:0e.0: >added OHCI v1.10 device as card 0, 8 IR + 8 IT contexts, quirks 0x0 Oct 5 21:24:00 taoseeker kernel: [ 3.686038] EXT4-fs (sda3): INFO: recovery required on readonly filesystem Oct 5 21:24:00 taoseeker kernel: [ 3.686052] EXT4-fs (sda3): write access will be enabled during recovery Oct 5 21:24:00 taoseeker kernel: [ 3.788148] usbcore: registered new interface driver usbhid Oct 5 21:24:00 taoseeker kernel: [ 3.788161] usbhid: USB HID core driver Oct 5 21:24:00 taoseeker kernel: [ 3.806635] input: HID 05ac:1000 as /devices/pci0001:10/0001:10:1a.0/usb2/2-1/2-1:1.0/input/input3 Oct 5 21:24:00 taoseeker kernel: [ 3.807288] hid-generic 0003:05AC:1000.0001: >input,hidraw0: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0001:10:1a.0-1/input0 Oct 5 21:24:00 taoseeker kernel: [ 3.809718] input: HID 05ac:1000 as /devices/pci0001:10/0001:10:1a.0/usb2/2-1/2-1:1.1/input/input4 Oct 5 21:24:00 taoseeker kernel: [ 3.810539] hid-generic 0003:05AC:1000.0002: >input,hidraw1: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0001:10:1a.0-1/input1 Oct 5 21:24:00 taoseeker kernel: [ 4.079208] firewire_core 0002:20:0e.0: created device fw0: GUID 001124fffed5aabc, S400 Oct 5 21:24:00 taoseeker kernel: [ 7.206057] EXT4-fs (sda3): recovery complete Oct 5 21:24:00 taoseeker kernel: [ 7.220823] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) Oct 5 21:24:00 taoseeker kernel: [ 22.152148] Adding 2439064k swap on /dev/sda4. Priority:-1 extents:1 across:2439064k Oct 5 21:24:00 taoseeker kernel: [ 22.219040] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Oct 5 21:24:00 taoseeker kernel: [ 22.332328] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro Oct 5 21:24:00 taoseeker kernel: [ 22.855140] snd-powermac no longer handles any machines with a layout-id property in the device-tree, use snd-aoa. Oct 5 21:24:00 taoseeker kernel: [ 22.887537] agpgart-uninorth 0000:00:0b.0: >Apple UniNorth 2 chipset Oct 5 21:24:00 taoseeker kernel: [ 22.888787] agpgart-uninorth 0000:00:0b.0: >configuring for size idx: 64 Oct 5 21:24:00 taoseeker kernel: [ 22.923394] agpgart-uninorth 0000:00:0b.0: >AGP aperture is 256M @ 0x0 Oct 5 21:24:00 taoseeker kernel: [ 22.924077] apm_emu: PMU APM Emulation initialized. Oct 5 21:24:00 taoseeker kernel: [ 23.723057] lp: driver loaded but no devices found Oct 5 21:24:00 taoseeker kernel: [ 23.796868] Bluetooth: Core ver 2.16 Oct 5 21:24:00 taoseeker kernel: [ 23.799447] NET: Registered protocol family 31 Oct 5 21:24:00 taoseeker kernel: [ 23.799457] Bluetooth: HCI device and connection manager initialized Oct 5 21:24:00 taoseeker kernel: [ 23.799463] Bluetooth: HCI socket layer initialized Oct 5 21:24:00 taoseeker kernel: [ 23.799467] Bluetooth: L2CAP socket layer initialized Oct 5 21:24:00 taoseeker kernel: [ 23.799490] Bluetooth: SCO socket layer initialized Oct 5 21:24:00 taoseeker kernel: [ 23.804388] ppdev: user-space parallel port driver Oct 5 21:24:00 taoseeker kernel: [ 23.871626] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Oct 5 21:24:00 taoseeker kernel: [ 23.871638] Bluetooth: BNEP filters: protocol multicast Oct 5 21:24:00 taoseeker kernel: [ 23.883378] Bluetooth: RFCOMM TTY layer initialized Oct 5 21:24:00 taoseeker kernel: [ 23.883398] Bluetooth: RFCOMM socket layer initialized Oct 5 21:24:00 taoseeker kernel: [ 23.883403] Bluetooth: RFCOMM ver 1.11 Oct 5 21:24:01 taoseeker kernel: [ 24.056516] type=1400 audit(1349465041.036:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=499 comm="apparmor_parser" Oct 5 21:24:01 taoseeker kernel: [ 24.063327] type=1400 audit(1349465041.044:3): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=499 comm="apparmor_parser" Oct 5 21:24:01 taoseeker kernel: [ 24.153847] cfg80211: Calling CRDA to update world regulatory domain Oct 5 21:24:01 taoseeker kernel: [ 24.314164] appletouch 2-2:1.0: >Geyser mode initialized. Oct 5 21:24:01 taoseeker kernel: [ 24.314503] input: appletouch as /devices/pci0001:10/0001:10:1a.0/usb2/2-2/2-2:1.0/input/input5 Oct 5 21:24:01 taoseeker kernel: [ 24.315519] usbcore: registered new interface driver appletouch Oct 5 21:24:01 taoseeker kernel: [ 24.457641] type=1400 audit(1349465041.436:4): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=544 comm="apparmor_parser" Oct 5 21:24:01 taoseeker kernel: [ 24.492946] usb 2-1: >USB disconnect, device number 2 Oct 5 21:24:01 taoseeker kernel: [ 24.496694] usb 2-1: >usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -62 Oct 5 21:24:01 taoseeker kernel: [ 24.529752] rtc-generic rtc-generic: >rtc core: registered rtc-generic as rtc0 Oct 5 21:24:01 taoseeker kernel: [ 24.604306] ams: Found I2C based motion sensor Oct 5 21:24:01 taoseeker kernel: [ 24.835083] usb 2-1: >new full-speed USB device number 4 using ohci_hcd Oct 5 21:24:01 taoseeker kernel: [ 24.865657] b43-phy0: Broadcom 4318 WLAN found (core revision 9) Oct 5 21:24:01 taoseeker kernel: [ 24.931528] Broadcom 43xx driver loaded [ Features: PNL ] Oct 5 21:24:02 taoseeker kernel: [ 25.195117] usb 2-1: >New USB device found, idVendor=05ac, idProduct=8207 Oct 5 21:24:02 taoseeker kernel: [ 25.195130] usb 2-1: >New USB device strings: Mfr=0, Product=0, SerialNumber=0 Oct 5 21:24:02 taoseeker kernel: [ 25.589661] input: Macintosh mouse button emulation as /devices/virtual/input/input6 Oct 5 21:24:02 taoseeker modem-manager[672]: ModemManager (version 0.5.999) starting... Oct 5 21:24:02 taoseeker NetworkManager[682]: NetworkManager (version 0.9.6.0) is starting... Oct 5 21:24:02 taoseeker NetworkManager[682]: Read config file /etc/NetworkManager/NetworkManager.conf Oct 5 21:24:02 taoseeker NetworkManager[682]: WEXT support is enabled Oct 5 21:24:02 taoseeker modem-manager[672]: Loaded plugin 'Wavecom' Oct 5 21:24:02 taoseeker modem-manager[672]: Loaded plugin 'Ericsson MBM' Oct 5 21:24:02 taoseeker modem-manager[672]: Loaded plugin 'SimTech' Oct 5 21:24:02 taoseeker modem-manager[672]: Loaded plugin 'Novatel' Oct 5 21:24:02 taoseeker modem-manager[672]: Loaded plugin 'Nokia' Oct 5 21:24:02 taoseeker modem-manager[672]: Loaded plugin 'AnyData' Oct 5 21:24:02 taoseeker modem-manager[672]: Loaded plugin 'MotoC' Oct 5 21:24:02 taoseeker modem-manager[672]: Loaded plugin 'Option High-Speed' Oct 5 21:24:02 taoseeker modem-manager[672]: Loaded plugin 'X22X' Oct 5 21:24:02 taoseeker modem-manager[672]: Loaded plugin 'Linktop' Oct 5 21:24:02 taoseeker modem-manager[672]: Loaded plugin 'Longcheer' Oct 5 21:24:02 taoseeker modem-manager[672]: Loaded plugin 'Sierra' Oct 5 21:24:02 taoseeker modem-manager[672]: Loaded plugin 'Option' Oct 5 21:24:02 taoseeker modem-manager[672]: Loaded plugin 'Gobi' Oct 5 21:24:02 taoseeker modem-manager[672]: Loaded plugin 'Samsung' Oct 5 21:24:02 taoseeker modem-manager[672]: Loaded plugin 'Huawei' Oct 5 21:24:02 taoseeker modem-manager[672]: Loaded plugin 'ZTE' Oct 5 21:24:02 taoseeker modem-manager[672]: Loaded plugin 'Cinterion' Oct 5 21:24:02 taoseeker modem-manager[672]: Loaded plugin 'Iridium' Oct 5 21:24:02 taoseeker modem-manager[672]: Loaded plugin 'Generic' Oct 5 21:24:02 taoseeker modem-manager[672]: Successfully loaded 20 plugins Oct 5 21:24:02 taoseeker NetworkManager[682]: DNS: loaded plugin dnsmasq Oct 5 21:24:03 taoseeker NetworkManager[682]: SCPlugin-Ifupdown: init! Oct 5 21:24:03 taoseeker modem-manager[672]: (ttyPZ1) opening serial port... Oct 5 21:24:03 taoseeker NetworkManager[682]: SCPlugin-Ifupdown: update_system_hostname Oct 5 21:24:03 taoseeker NetworkManager[682]: SCPluginIfupdown: management mode: unmanaged Oct 5 21:24:03 taoseeker NetworkManager[682]: SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0002:20/0002:20:0f.0/net/eth0, iface: eth0) Oct 5 21:24:03 taoseeker NetworkManager[682]: SCPlugin-Ifupdown: device added (path: /sys/devices/pci0002:20/0002:20:0f.0/net/eth0, iface: eth0): no ifupdown configuration found. Oct 5 21:24:03 taoseeker NetworkManager[682]: SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/lo, iface: lo) Oct 5 21:24:03 taoseeker NetworkManager[682]: SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/lo, iface: lo): no ifupdown configuration found. Oct 5 21:24:03 taoseeker NetworkManager[682]: SCPlugin-Ifupdown: end _init. Oct 5 21:24:03 taoseeker NetworkManager[682]: Loaded plugin ifupdown: (C) 2008 Canonical Ltd. To report bugs please use the NetworkManager mailing list. Oct 5 21:24:03 taoseeker NetworkManager[682]: Loaded plugin keyfile: (c) 2007 - 2010 Red Hat, Inc. To report bugs please use the NetworkManager mailing list. Oct 5 21:24:03 taoseeker NetworkManager[682]: Ifupdown: get unmanaged devices count: 0 Oct 5 21:24:03 taoseeker NetworkManager[682]: SCPlugin-Ifupdown: (275999944) ... get_connections. Oct 5 21:24:03 taoseeker NetworkManager[682]: SCPlugin-Ifupdown: (275999944) ... get_connections (managed=false): return empty list. Oct 5 21:24:03 taoseeker NetworkManager[682]: keyfile: parsing Auto Ethernet ... Oct 5 21:24:03 taoseeker NetworkManager[682]: keyfile: read connection 'Auto Ethernet' Oct 5 21:24:03 taoseeker kernel: [ 26.277812] type=1400 audit(1349465043.256:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=724 comm="apparmor_parser" Oct 5 21:24:03 taoseeker kernel: [ 26.278531] type=1400 audit(1349465043.256:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=724 comm="apparmor_parser" Oct 5 21:24:03 taoseeker NetworkManager[682]: keyfile: parsing Telenor6904ett ... Oct 5 21:24:03 taoseeker NetworkManager[682]: keyfile: read connection 'Telenor6904ett' Oct 5 21:24:03 taoseeker NetworkManager[682]: Ifupdown: get unmanaged devices count: 0 Oct 5 21:24:03 taoseeker NetworkManager[682]: modem-manager is now available Oct 5 21:24:03 taoseeker kernel: [ 26.321463] type=1400 audit(1349465043.300:7): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=726 comm="apparmor_parser" Oct 5 21:24:03 taoseeker NetworkManager[682]: monitoring kernel firmware directory '/lib/firmware'. Oct 5 21:24:03 taoseeker modem-manager[672]: (ttyPZ1): port attributes not fully set Oct 5 21:24:03 taoseeker modem-manager[672]: (ttyPZ0) opening serial port... Oct 5 21:24:03 taoseeker modem-manager[672]: (ttyPZ0): port attributes not fully set Oct 5 21:24:03 taoseeker kernel: [ 26.341085] type=1400 audit(1349465043.320:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=726 comm="apparmor_parser" Oct 5 21:24:03 taoseeker kernel: [ 26.341582] type=1400 audit(1349465043.320:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=726 comm="apparmor_parser" Oct 5 21:24:03 taoseeker NetworkManager[682]: WiFi enabled by radio killswitch; enabled by state file Oct 5 21:24:03 taoseeker NetworkManager[682]: WWAN enabled by radio killswitch; enabled by state file Oct 5 21:24:03 taoseeker NetworkManager[682]: WiMAX enabled by radio killswitch; enabled by state file Oct 5 21:24:03 taoseeker NetworkManager[682]: Networking is enabled by state file Oct 5 21:24:03 taoseeker NetworkManager[682]: failed to allocate link cache: (-10) Operation not supported Oct 5 21:24:03 taoseeker NetworkManager[682]: (eth0): carrier is OFF Oct 5 21:24:03 taoseeker NetworkManager[682]: [1349465043.391039] [nm-device-ethernet.c:456] real_update_permanent_hw_address(): (eth0): unable to read permanent MAC address (error 0) Oct 5 21:24:03 taoseeker NetworkManager[682]: (eth0): new Ethernet device (driver: 'gem' ifindex: 2) Oct 5 21:24:03 taoseeker NetworkManager[682]: (eth0): exported as /org/freedesktop/NetworkManager/Devices/0 Oct 5 21:24:03 taoseeker NetworkManager[682]: (eth0): now managed Oct 5 21:24:03 taoseeker NetworkManager[682]: (eth0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2] Oct 5 21:24:03 taoseeker NetworkManager[682]: (eth0): bringing up device. Oct 5 21:24:03 taoseeker NetworkManager[682]: (eth0): preparing device. Oct 5 21:24:03 taoseeker kernel: [ 26.484829] sungem_phy: PHY ID: 4061e4, addr: 0 Oct 5 21:24:03 taoseeker kernel: [ 26.485188] gem 0002:20:0f.0: >eth0: Found BCM5221 PHY Oct 5 21:24:03 taoseeker kernel: [ 26.485987] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Oct 5 21:24:03 taoseeker NetworkManager[682]: (eth0): deactivating device (reason 'managed') [2] Oct 5 21:24:03 taoseeker kernel: [ 26.490853] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Oct 5 21:24:03 taoseeker NetworkManager[682]: /sys/devices/virtual/net/lo: couldn't determine device driver; ignoring... Oct 5 21:24:03 taoseeker NetworkManager[682]: /sys/devices/virtual/net/lo: couldn't determine device driver; ignoring... Oct 5 21:24:03 taoseeker kernel: [ 26.513017] type=1400 audit(1349465043.492:10): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=728 comm="apparmor_parser" Oct 5 21:24:03 taoseeker kernel: [ 26.545399] type=1400 audit(1349465043.524:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//sanitized_helper" pid=728 comm="apparmor_parser" Oct 5 21:24:04 taoseeker kernel: [ 27.017021] usbcore: registered new interface driver btusb Oct 5 21:24:04 taoseeker kernel: [ 27.031129] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: Oct 5 21:24:04 taoseeker kernel: [ 27.031141] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) Oct 5 21:24:04 taoseeker kernel: [ 27.031146] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: Oct 5 21:24:04 taoseeker kernel: [ 27.031150] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) Oct 5 21:24:04 taoseeker kernel: [ 27.031153] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: Oct 5 21:24:04 taoseeker kernel: [ 27.031157] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) Oct 5 21:24:04 taoseeker kernel: [ 27.031161] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: Oct 5 21:24:04 taoseeker kernel: [ 27.031165] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) Oct 5 21:24:04 taoseeker kernel: [ 27.031169] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: Oct 5 21:24:04 taoseeker kernel: [ 27.031173] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) Oct 5 21:24:04 taoseeker kernel: [ 27.031177] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: Oct 5 21:24:04 taoseeker kernel: [ 27.031181] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) Oct 5 21:24:04 taoseeker kernel: [ 27.031184] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: Oct 5 21:24:04 taoseeker kernel: [ 27.031188] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) Oct 5 21:24:04 taoseeker kernel: [ 27.031192] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: Oct 5 21:24:04 taoseeker kernel: [ 27.031196] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) Oct 5 21:24:04 taoseeker kernel: [ 27.031200] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: Oct 5 21:24:04 taoseeker kernel: [ 27.031204] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) Oct 5 21:24:04 taoseeker kernel: [ 27.031208] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: Oct 5 21:24:04 taoseeker kernel: [ 27.031212] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) Oct 5 21:24:04 taoseeker kernel: [ 27.031215] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: Oct 5 21:24:04 taoseeker kernel: [ 27.031219] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm) Oct 5 21:24:04 taoseeker kernel: [ 27.031223] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: Oct 5 21:24:04 taoseeker kernel: [ 27.031227] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (600 mBi, 2000 mBm) Oct 5 21:24:04 taoseeker kernel: [ 27.031231] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: Oct 5 21:24:04 taoseeker kernel: [ 27.031235] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (600 mBi, 2000 mBm) Oct 5 21:24:04 taoseeker kernel: [ 27.031239] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule: Oct 5 21:24:04 taoseeker kernel: [ 27.031243] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (600 mBi, 2000 mBm) Oct 5 21:24:04 taoseeker NetworkManager[682]: found WiFi radio killswitch rfkill1 (at /sys/devices/pci0001:10/0001:10:12.0/ssb0:0/ieee80211/phy0/rfkill1) (driver (unknown)) Oct 5 21:24:04 taoseeker kernel: [ 27.119471] ieee80211 phy0: >Selected rate control algorithm 'minstrel_ht' Oct 5 21:24:04 taoseeker kernel: [ 27.120258] Registered led device: b43-phy0::tx Oct 5 21:24:04 taoseeker kernel: [ 27.120304] Registered led device: b43-phy0::rx Oct 5 21:24:04 taoseeker kernel: [ 27.120343] Registered led device: b43-phy0::radio Oct 5 21:24:04 taoseeker NetworkManager[682]: (wlan2): using nl80211 for WiFi device control Oct 5 21:24:04 taoseeker NetworkManager[682]: (wlan2): driver supports Access Point (AP) mode Oct 5 21:24:04 taoseeker NetworkManager[682]: (wlan2): new 802.11 WiFi device (driver: 'b43' ifindex: 3) Oct 5 21:24:04 taoseeker NetworkManager[682]: (wlan2): exported as /org/freedesktop/NetworkManager/Devices/1 Oct 5 21:24:04 taoseeker NetworkManager[682]: (wlan2): now managed Oct 5 21:24:04 taoseeker NetworkManager[682]: (wlan2): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2] Oct 5 21:24:04 taoseeker NetworkManager[682]: (wlan2): bringing up device. Oct 5 21:24:04 taoseeker kernel: [ 27.905392] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07) Oct 5 21:24:04 taoseeker kernel: [ 28.004291] IPv6: ADDRCONF(NETDEV_UP): wlan2: link is not ready Oct 5 21:24:04 taoseeker NetworkManager[682]: (wlan2): preparing device. Oct 5 21:24:04 taoseeker NetworkManager[682]: (wlan2): deactivating device (reason 'managed') [2] Oct 5 21:24:04 taoseeker kernel: [ 28.010641] IPv6: ADDRCONF(NETDEV_UP): wlan2: link is not ready Oct 5 21:24:05 taoseeker NetworkManager[682]: SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0001:10/0001:10:12.0/ssb0:0/net/wlan2, iface: wlan2) Oct 5 21:24:05 taoseeker NetworkManager[682]: SCPlugin-Ifupdown: device added (path: /sys/devices/pci0001:10/0001:10:12.0/ssb0:0/net/wlan2, iface: wlan2): no ifupdown configuration found. Oct 5 21:24:05 taoseeker NetworkManager[682]: wpa_supplicant started Oct 5 21:24:05 taoseeker NetworkManager[682]: (wlan2) supports 4 scan SSIDs Oct 5 21:24:05 taoseeker NetworkManager[682]: (wlan2): supplicant interface state: starting -> ready Oct 5 21:24:05 taoseeker NetworkManager[682]: (wlan2): device state change: unavailable -> disconnected (reason 'supplicant-available') [20 30 42] Oct 5 21:24:05 taoseeker NetworkManager[682]: Trying to remove a non-existant call id. Oct 5 21:24:05 taoseeker NetworkManager[682]: (wlan2): supplicant interface state: ready -> inactive Oct 5 21:24:05 taoseeker NetworkManager[682]: (wlan2) supports 4 scan SSIDs Oct 5 21:24:06 taoseeker NetworkManager[682]: Auto-activating connection 'Telenor6904ett'. Oct 5 21:24:06 taoseeker NetworkManager[682]: Activation (wlan2) starting connection 'Telenor6904ett' Oct 5 21:24:06 taoseeker NetworkManager[682]: (wlan2): device state change: disconnected -> prepare (reason 'none') [30 40 0] Oct 5 21:24:06 taoseeker NetworkManager[682]: Activation (wlan2) Stage 1 of 5 (Device Prepare) scheduled... Oct 5 21:24:06 taoseeker NetworkManager[682]: Activation (wlan2) Stage 1 of 5 (Device Prepare) started... Oct 5 21:24:06 taoseeker NetworkManager[682]: Activation (wlan2) Stage 2 of 5 (Device Configure) scheduled... Oct 5 21:24:06 taoseeker NetworkManager[682]: Activation (wlan2) Stage 1 of 5 (Device Prepare) complete. Oct 5 21:24:06 taoseeker NetworkManager[682]: Activation (wlan2) Stage 2 of 5 (Device Configure) starting... Oct 5 21:24:06 taoseeker NetworkManager[682]: (wlan2): device state change: prepare -> config (reason 'none') [40 50 0] Oct 5 21:24:06 taoseeker NetworkManager[682]: Activation (wlan2/wireless): connection 'Telenor6904ett' has security, and secrets exist. No new secrets needed. Oct 5 21:24:06 taoseeker NetworkManager[682]: Config: added 'ssid' value 'Telenor6904ett' Oct 5 21:24:06 taoseeker NetworkManager[682]: Config: added 'scan_ssid' value '1' Oct 5 21:24:06 taoseeker NetworkManager[682]: Config: added 'key_mgmt' value 'WPA-PSK' Oct 5 21:24:06 taoseeker NetworkManager[682]: Config: added 'auth_alg' value 'OPEN' Oct 5 21:24:06 taoseeker NetworkManager[682]: Config: added 'psk' value '' Oct 5 21:24:06 taoseeker NetworkManager[682]: Activation (wlan2) Stage 2 of 5 (Device Configure) complete. Oct 5 21:24:06 taoseeker NetworkManager[682]: Config: set interface ap_scan to 1 Oct 5 21:24:06 taoseeker NetworkManager[682]: (wlan2): supplicant interface state: inactive -> scanning Oct 5 21:24:07 taoseeker wpa_supplicant[894]: wlan2: SME: Trying to authenticate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 21:24:07 taoseeker kernel: [ 30.754238] wlan2: authenticate with 50:67:f0:d3:ed:c4 Oct 5 21:24:07 taoseeker NetworkManager[682]: (wlan2): supplicant interface state: scanning -> authenticating Oct 5 21:24:07 taoseeker kernel: [ 30.775249] wlan2: send auth to 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 21:24:07 taoseeker kernel: [ 30.777738] wlan2: authenticated Oct 5 21:24:07 taoseeker wpa_supplicant[894]: wlan2: Trying to associate with 50:67:f0:d3:ed:c4 (SSID='Telenor6904ett' freq=2417 MHz) Oct 5 21:24:07 taoseeker kernel: [ 30.781352] wlan2: associating with AP with corrupt beacon Oct 5 21:24:07 taoseeker kernel: [ 30.783067] wlan2: associate with 50:67:f0:d3:ed:c4 (try 1/3) Oct 5 21:24:07 taoseeker NetworkManager[682]: (wlan2): supplicant interface state: authenticating -> associating Oct 5 21:24:07 taoseeker wpa_supplicant[894]: wlan2: Associated with 50:67:f0:d3:ed:c4 Oct 5 21:24:07 taoseeker kernel: [ 30.791584] wlan2: RX AssocResp from 50:67:f0:d3:ed:c4 (capab=0xc11 status=0 aid=1) Oct 5 21:24:07 taoseeker kernel: [ 30.792078] wlan2: associated Oct 5 21:24:07 taoseeker kernel: [ 30.792669] IPv6: ADDRCONF(NETDEV_CHANGE): wlan2: link becomes ready Oct 5 21:24:07 taoseeker kernel: [ 30.792861] cfg80211: Pending regulatory request, waiting for it to be processed... Oct 5 21:24:07 taoseeker NetworkManager[682]: (wlan2): supplicant interface state: associating -> associated Oct 5 21:24:08 taoseeker NetworkManager[682]: (wlan2): supplicant interface state: associated -> 4-way handshake Oct 5 21:24:08 taoseeker wpa_supplicant[894]: wlan2: WPA: Key negotiation completed with 50:67:f0:d3:ed:c4 [PTK=CCMP GTK=CCMP] Oct 5 21:24:08 taoseeker wpa_supplicant[894]: wlan2: CTRL-EVENT-CONNECTED - Connection to 50:67:f0:d3:ed:c4 completed (auth) [id=0 id_str=] Oct 5 21:24:08 taoseeker NetworkManager[682]: (wlan2): supplicant interface state: 4-way handshake -> completed Oct 5 21:24:08 taoseeker NetworkManager[682]: Activation (wlan2/wireless) Stage 2 of 5 (Device Configure) successful. Connected to wireless network 'Telenor6904ett'. Oct 5 21:24:08 taoseeker NetworkManager[682]: Activation (wlan2) Stage 3 of 5 (IP Configure Start) scheduled. Oct 5 21:24:08 taoseeker NetworkManager[682]: Activation (wlan2) Stage 3 of 5 (IP Configure Start) started... Oct 5 21:24:08 taoseeker NetworkManager[682]: (wlan2): device state change: config -> ip-config (reason 'none') [50 70 0] Oct 5 21:24:08 taoseeker NetworkManager[682]: Activation (wlan2) Beginning DHCPv4 transaction (timeout in 45 seconds) Oct 5 21:24:08 taoseeker NetworkManager[682]: dhclient started with pid 1198 Oct 5 21:24:08 taoseeker NetworkManager[682]: Activation (wlan2) Beginning IP6 addrconf. Oct 5 21:24:08 taoseeker NetworkManager[682]: Activation (wlan2) Stage 3 of 5 (IP Configure Start) complete. Oct 5 21:24:08 taoseeker dhclient: Internet Systems Consortium DHCP Client 4.2.4 Oct 5 21:24:08 taoseeker dhclient: Copyright 2004-2012 Internet Systems Consortium. Oct 5 21:24:08 taoseeker dhclient: All rights reserved. Oct 5 21:24:08 taoseeker dhclient: For info, please visit https://www.isc.org/software/dhcp/ Oct 5 21:24:08 taoseeker dhclient: Oct 5 21:24:08 taoseeker dhclient: Listening on LPF/wlan2/00:14:51:81:6a:17 Oct 5 21:24:08 taoseeker NetworkManager[682]: (wlan2): DHCPv4 state changed nbi -> preinit Oct 5 21:24:08 taoseeker dhclient: Sending on LPF/wlan2/00:14:51:81:6a:17 Oct 5 21:24:08 taoseeker dhclient: Sending on Socket/fallback Oct 5 21:24:08 taoseeker dhclient: DHCPREQUEST of 10.0.0.66 on wlan2 to 255.255.255.255 port 67 Oct 5 21:24:11 taoseeker dhclient: DHCPREQUEST of 10.0.0.66 on wlan2 to 255.255.255.255 port 67 Oct 5 21:24:11 taoseeker dhclient: DHCPACK of 10.0.0.66 from 10.0.0.138 Oct 5 21:24:11 taoseeker dhclient: bound to 10.0.0.66 -- renewal in 35891 seconds. Oct 5 21:24:11 taoseeker NetworkManager[682]: (wlan2): DHCPv4 state changed preinit -> reboot Oct 5 21:24:11 taoseeker NetworkManager[682]: address 10.0.0.66 Oct 5 21:24:11 taoseeker NetworkManager[682]: prefix 24 (255.255.255.0) Oct 5 21:24:11 taoseeker NetworkManager[682]: gateway 10.0.0.138 Oct 5 21:24:11 taoseeker NetworkManager[682]: hostname 'taoseeker' Oct 5 21:24:11 taoseeker NetworkManager[682]: nameserver '130.67.15.198' Oct 5 21:24:11 taoseeker NetworkManager[682]: nameserver '193.213.112.4' Oct 5 21:24:11 taoseeker NetworkManager[682]: nameserver '10.0.0.138' Oct 5 21:24:11 taoseeker NetworkManager[682]: domain name 'lan' Oct 5 21:24:11 taoseeker NetworkManager[682]: Activation (wlan2) Stage 5 of 5 (IPv4 Configure Commit) scheduled... Oct 5 21:24:11 taoseeker NetworkManager[682]: Activation (wlan2) Stage 5 of 5 (IPv4 Commit) started... Oct 5 21:24:13 taoseeker NetworkManager[682]: (wlan2): device state change: ip-config -> activated (reason 'none') [70 100 0] Oct 5 21:24:13 taoseeker NetworkManager[682]: DNS: starting dnsmasq... Oct 5 21:24:13 taoseeker NetworkManager[682]: [1349465053.124231] [nm-dns-dnsmasq.c:390] update(): dnsmasq not available on the bus, can't update servers. Oct 5 21:24:13 taoseeker NetworkManager[682]: [1349465053.125633] [nm-dns-dnsmasq.c:392] update(): dnsmasq owner not found on bus: Could not get owner of name 'org.freedesktop.NetworkManager.dnsmasq': no such name Oct 5 21:24:13 taoseeker NetworkManager[682]: DNS: plugin dnsmasq update failed Oct 5 21:24:13 taoseeker NetworkManager[682]: ((null)): writing resolv.conf to /sbin/resolvconf Oct 5 21:24:13 taoseeker NetworkManager[682]: Policy set 'Telenor6904ett' (wlan2) as default for IPv4 routing and DNS. Oct 5 21:24:13 taoseeker NetworkManager[682]: Activation (wlan2) successful, device activated. Oct 5 21:24:13 taoseeker NetworkManager[682]: Activation (wlan2) Stage 5 of 5 (IPv4 Commit) complete. Oct 5 21:24:13 taoseeker NetworkManager[682]: dnsmasq appeared on DBus: :1.26 Oct 5 21:24:13 taoseeker NetworkManager[682]: ((null)): writing resolv.conf to /sbin/resolvconf Oct 5 21:24:15 taoseeker modem-manager[672]: (ttyPZ1) closing serial port... Oct 5 21:24:15 taoseeker modem-manager[672]: (ttyPZ1) serial port closed Oct 5 21:24:15 taoseeker modem-manager[672]: (ttyPZ1) opening serial port... Oct 5 21:24:15 taoseeker modem-manager[672]: (ttyPZ0) closing serial port... Oct 5 21:24:15 taoseeker modem-manager[672]: (ttyPZ0) serial port closed Oct 5 21:24:15 taoseeker modem-manager[672]: (ttyPZ0) opening serial port... Oct 5 21:24:21 taoseeker modem-manager[672]: (ttyPZ1) closing serial port... Oct 5 21:24:21 taoseeker modem-manager[672]: (ttyPZ1) serial port closed Oct 5 21:24:21 taoseeker modem-manager[672]: (ttyPZ0) closing serial port... Oct 5 21:24:21 taoseeker modem-manager[672]: (ttyPZ0) serial port closed Oct 5 21:24:21 taoseeker modem-manager[672]: (ttyPZ1) opening serial port... Oct 5 21:24:21 taoseeker modem-manager[672]: (ttyPZ1): port attributes not fully set Oct 5 21:24:21 taoseeker modem-manager[672]: (ttyPZ0) opening serial port... Oct 5 21:24:21 taoseeker modem-manager[672]: (ttyPZ0): port attributes not fully set Oct 5 21:24:28 taoseeker NetworkManager[682]: (wlan2): IP6 addrconf timed out or failed. Oct 5 21:24:28 taoseeker NetworkManager[682]: Activation (wlan2) Stage 4 of 5 (IPv6 Configure Timeout) scheduled... Oct 5 21:24:28 taoseeker NetworkManager[682]: Activation (wlan2) Stage 4 of 5 (IPv6 Configure Timeout) started... Oct 5 21:24:28 taoseeker NetworkManager[682]: Activation (wlan2) Stage 4 of 5 (IPv6 Configure Timeout) complete. Oct 5 21:24:33 taoseeker modem-manager[672]: (ttyPZ1) closing serial port... Oct 5 21:24:33 taoseeker modem-manager[672]: (ttyPZ1) serial port closed Oct 5 21:24:33 taoseeker modem-manager[672]: (ttyPZ1) opening serial port... Oct 5 21:24:33 taoseeker modem-manager[672]: (ttyPZ0) closing serial port... Oct 5 21:24:33 taoseeker modem-manager[672]: (ttyPZ0) serial port closed Oct 5 21:24:33 taoseeker modem-manager[672]: (ttyPZ0) opening serial port... Oct 5 21:24:39 taoseeker modem-manager[672]: (ttyPZ1) closing serial port... Oct 5 21:24:39 taoseeker modem-manager[672]: (ttyPZ1) serial port closed Oct 5 21:24:39 taoseeker modem-manager[672]: (ttyPZ0) closing serial port... Oct 5 21:24:39 taoseeker modem-manager[672]: (ttyPZ0) serial port closed Oct 5 21:25:03 taoseeker wpa_supplicant[894]: wlan2: WPA: Group rekeying completed with 50:67:f0:d3:ed:c4 [GTK=CCMP] Oct 5 21:25:05 taoseeker kernel: [ 88.933908] ondemand governor failed, too long transition latency of HW, fallback to performance governor Oct 5 21:32:35 taoseeker kernel: [ 538.412019] Program lshw tried to access /dev/mem between e0000->e1000. Oct 5 21:55:04 taoseeker wpa_supplicant[894]: wlan2: WPA: Group rekeying completed with 50:67:f0:d3:ed:c4 [GTK=CCMP] Oct 5 22:25:05 taoseeker wpa_supplicant[894]: wlan2: WPA: Group rekeying completed with 50:67:f0:d3:ed:c4 [GTK=CCMP] Oct 5 22:30:11 taoseeker NetworkManager[682]: nl_recvmsgs() error: (-33) Dump inconsistency detected, interrupted