[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.35-23-generic (buildd@allspice) (gcc version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu5) ) #41-Ubuntu SMP Wed Nov 24 11:55:36 UTC 2010 (Ubuntu 2.6.35-23.41-generic 2.6.35.7) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-23-generic root=UUID=65a9e542-3b12-43fe-acdd-92d6e0585730 ro quiet splash [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009a000 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfcf0000 (usable) [ 0.000000] BIOS-e820: 00000000cfcf0000 - 00000000cfcf1000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cfcf1000 - 00000000cfd00000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cfd00000 - 00000000cfe00000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000110000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.4 present. [ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x110000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back [ 0.000000] 3 base 0000CFD00000 mask FFFFFFF00000 uncachable [ 0.000000] 4 base 0000CFE00000 mask FFFFFFE00000 uncachable [ 0.000000] 5 base 000100000000 mask FFFFF0000000 write-back [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000130000000 aka 4864M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000cfd00000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xcfcf0 max_arch_pfn = 0x400000000 [ 0.000000] e820 update range: 0000000000001000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009a000 (usable) [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000cfcf0000 (usable) [ 0.000000] modified: 00000000cfcf0000 - 00000000cfcf1000 (ACPI NVS) [ 0.000000] modified: 00000000cfcf1000 - 00000000cfd00000 (ACPI data) [ 0.000000] modified: 00000000cfd00000 - 00000000cfe00000 (reserved) [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000110000000 (usable) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] found SMP MP-table at [ffff8800000f4450] f4450 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: 0000000000000000-00000000cfcf0000 [ 0.000000] 0000000000 - 00c0000000 page 1G [ 0.000000] 00c0000000 - 00cfc00000 page 2M [ 0.000000] 00cfc00000 - 00cfcf0000 page 4k [ 0.000000] kernel direct mapping tables up to cfcf0000 @ 16000-19000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000110000000 [ 0.000000] 0100000000 - 0110000000 page 2M [ 0.000000] kernel direct mapping tables up to 110000000 @ 18000-1a000 [ 0.000000] RAMDISK: 37572000 - 37ff0000 [ 0.000000] ACPI: RSDP 00000000000f5df0 00014 (v00 GBT ) [ 0.000000] ACPI: RSDT 00000000cfcf1000 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: FACP 00000000cfcf1040 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: DSDT 00000000cfcf10c0 07732 (v01 GBT GBTUACPI 00001000 MSFT 03000000) [ 0.000000] ACPI: FACS 00000000cfcf0000 00040 [ 0.000000] ACPI: SSDT 00000000cfcf88c0 00544 (v01 PTLTD POWERNOW 00000001 LTP 00000001) [ 0.000000] ACPI: HPET 00000000cfcf8e40 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) [ 0.000000] ACPI: MCFG 00000000cfcf8e80 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: MATS 00000000cfcf8ec0 00034 (v01 GBT 00000000 00000000) [ 0.000000] ACPI: APIC 00000000cfcf8800 000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000110000000 [ 0.000000] Initmem setup node 0 0000000000000000-0000000110000000 [ 0.000000] NODE_DATA [0000000100000000 - 0000000100004fff] [ 0.000000] [ffffea0000000000-ffffea0003bfffff] PMD -> [ffff880100200000-ffff8801033fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00110000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009a [ 0.000000] 0: 0x00000100 -> 0x000cfcf0 [ 0.000000] 0: 0x00100000 -> 0x00110000 [ 0.000000] On node 0 totalpages: 916602 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3922 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 832808 pages, LIFO batch:31 [ 0.000000] Normal zone: 896 pages used for memmap [ 0.000000] Normal zone: 64640 pages, LIFO batch:15 [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 8 CPUs, 6 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] early_res array is doubled to 64 at [19000 - 197ff] [ 0.000000] PM: Registered nosave memory: 000000000009a000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000cfcf0000 - 00000000cfcf1000 [ 0.000000] PM: Registered nosave memory: 00000000cfcf1000 - 00000000cfd00000 [ 0.000000] PM: Registered nosave memory: 00000000cfd00000 - 00000000cfe00000 [ 0.000000] PM: Registered nosave memory: 00000000cfe00000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at cfe00000 (gap: cfe00000:10200000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880001e00000 s91520 r8192 d23168 u262144 [ 0.000000] pcpu-alloc: s91520 r8192 d23168 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] early_res array is doubled to 128 at [19800 - 1a7ff] [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 901370 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-23-generic root=UUID=65a9e542-3b12-43fe-acdd-92d6e0585730 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ e3fa000000 size 32 MB [ 0.000000] Aperture beyond 4GB. Ignoring. [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ 20000000 [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000024000000 [ 0.000000] Subtract (62 early reservations) [ 0.000000] #1 [0001000000 - 0001d17114] TEXT DATA BSS [ 0.000000] #2 [0037572000 - 0037ff0000] RAMDISK [ 0.000000] #3 [0001d18000 - 0001d180fe] BRK [ 0.000000] #4 [00000f4460 - 0000100000] BIOS reserved [ 0.000000] #5 [00000f4450 - 00000f4460] MP-table mpf [ 0.000000] #6 [000009a000 - 00000f1ac4] BIOS reserved [ 0.000000] #7 [00000f1c50 - 00000f4450] BIOS reserved [ 0.000000] #8 [00000f1ac4 - 00000f1c50] MP-table mpc [ 0.000000] #9 [0000010000 - 0000012000] TRAMPOLINE [ 0.000000] #10 [0000012000 - 0000016000] ACPI WAKEUP [ 0.000000] #11 [0000016000 - 0000018000] PGTABLE [ 0.000000] #12 [0000018000 - 0000019000] PGTABLE [ 0.000000] #13 [0100000000 - 0100005000] NODE_DATA [ 0.000000] #14 [0001d18100 - 0001d19100] BOOTMEM [ 0.000000] #15 [0001d17140 - 0001d173e0] BOOTMEM [ 0.000000] #16 [0100005000 - 0100006000] BOOTMEM [ 0.000000] #17 [0100006000 - 0100007000] BOOTMEM [ 0.000000] #18 [0100200000 - 0103400000] MEMMAP 0 [ 0.000000] #19 [0001d17400 - 0001d17580] BOOTMEM [ 0.000000] #20 [0001d19100 - 0001d31100] BOOTMEM [ 0.000000] #21 [0001d31100 - 0001d32900] BOOTMEM [ 0.000000] #22 [0001d33000 - 0001d34000] BOOTMEM [ 0.000000] #23 [0001d17580 - 0001d175c1] BOOTMEM [ 0.000000] #24 [0001d17600 - 0001d17643] BOOTMEM [ 0.000000] #25 [0001d17680 - 0001d178e8] BOOTMEM [ 0.000000] #26 [0001d17900 - 0001d17968] BOOTMEM [ 0.000000] #27 [0001d17980 - 0001d179e8] BOOTMEM [ 0.000000] #28 [0001d17a00 - 0001d17a68] BOOTMEM [ 0.000000] #29 [0001d17a80 - 0001d17ae8] BOOTMEM [ 0.000000] #30 [0001d17b00 - 0001d17b68] BOOTMEM [ 0.000000] #31 [0001d17b80 - 0001d17be8] BOOTMEM [ 0.000000] #32 [0001d17c00 - 0001d17c68] BOOTMEM [ 0.000000] #33 [0001d17c80 - 0001d17ce8] BOOTMEM [ 0.000000] #34 [0001d17d00 - 0001d17d68] BOOTMEM [ 0.000000] #35 [0001d17d80 - 0001d17de8] BOOTMEM [ 0.000000] #36 [0001d17e00 - 0001d17e20] BOOTMEM [ 0.000000] #37 [0001d17e40 - 0001d17e60] BOOTMEM [ 0.000000] #38 [0001d17e80 - 0001d17eea] BOOTMEM [ 0.000000] #39 [0001d17f00 - 0001d17f6a] BOOTMEM [ 0.000000] #40 [0001e00000 - 0001e1e000] BOOTMEM [ 0.000000] #41 [0001e40000 - 0001e5e000] BOOTMEM [ 0.000000] #42 [0001e80000 - 0001e9e000] BOOTMEM [ 0.000000] #43 [0001ec0000 - 0001ede000] BOOTMEM [ 0.000000] #44 [0001f00000 - 0001f1e000] BOOTMEM [ 0.000000] #45 [0001f40000 - 0001f5e000] BOOTMEM [ 0.000000] #46 [0001f80000 - 0001f9e000] BOOTMEM [ 0.000000] #47 [0001fc0000 - 0001fde000] BOOTMEM [ 0.000000] #48 [0001d17f80 - 0001d17f88] BOOTMEM [ 0.000000] #49 [0001d17fc0 - 0001d17fc8] BOOTMEM [ 0.000000] #50 [0001d32900 - 0001d32920] BOOTMEM [ 0.000000] #51 [0001d32940 - 0001d32980] BOOTMEM [ 0.000000] #52 [0001d32980 - 0001d32aa0] BOOTMEM [ 0.000000] #53 [0001d32ac0 - 0001d32b08] BOOTMEM [ 0.000000] #54 [0001d32b40 - 0001d32b88] BOOTMEM [ 0.000000] #55 [0001d34000 - 0001d3c000] BOOTMEM [ 0.000000] #56 [0020000000 - 0024000000] BOOTMEM [ 0.000000] #57 [0001d32bc0 - 0001d32be0] BOOTMEM [ 0.000000] #58 [0001fde000 - 0005fde000] BOOTMEM [ 0.000000] #59 [0001d3c000 - 0001d5c000] BOOTMEM [ 0.000000] #60 [0001d5c000 - 0001d9c000] BOOTMEM [ 0.000000] #61 [000001a800 - 0000022800] BOOTMEM [ 0.000000] Memory: 3458396k/4456448k available (5710k kernel code, 790040k absent, 208012k reserved, 5380k data, 908k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] Verbose stalled-CPUs detection is disabled. [ 0.000000] NR_IRQS:4352 nr_irqs:744 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 36700160 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 3315.034 MHz processor. [ 0.010007] Calibrating delay loop (skipped), value calculated using timer frequency.. 6630.05 BogoMIPS (lpj=33150290) [ 0.010010] pid_max: default: 32768 minimum: 301 [ 0.010026] Security Framework initialized [ 0.010038] AppArmor: AppArmor initialized [ 0.010040] Yama: becoming mindful. [ 0.010354] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.020101] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.020635] Mount-cache hash table entries: 256 [ 0.020727] Initializing cgroup subsys ns [ 0.020730] Initializing cgroup subsys cpuacct [ 0.020733] Initializing cgroup subsys memory [ 0.020739] Initializing cgroup subsys devices [ 0.020740] Initializing cgroup subsys freezer [ 0.020742] Initializing cgroup subsys net_cls [ 0.020759] tseg: 00cfe00000 [ 0.020760] CPU: Physical Processor ID: 0 [ 0.020761] CPU: Processor Core ID: 0 [ 0.020763] mce: CPU supports 6 MCE banks [ 0.020770] using C1E aware idle routine [ 0.020771] Performance Events: AMD PMU driver. [ 0.020774] ... version: 0 [ 0.020775] ... bit width: 48 [ 0.020776] ... generic registers: 4 [ 0.020777] ... value mask: 0000ffffffffffff [ 0.020778] ... max period: 00007fffffffffff [ 0.020779] ... fixed-purpose events: 0 [ 0.020780] ... event mask: 000000000000000f [ 0.021924] ACPI: Core revision 20100428 [ 0.030019] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.030026] ftrace: allocating 22688 entries in 89 pages [ 0.040058] Setting APIC routing to flat [ 0.040436] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.142997] CPU0: AMD Athlon(tm) II X2 265 Processor stepping 03 [ 0.150000] Booting Node 0, Processors #1 [ 0.310006] Brought up 2 CPUs [ 0.310008] Total of 2 processors activated (13260.63 BogoMIPS). [ 0.310014] System has AMD C1E enabled [ 0.310032] Switch to broadcast mode on CPU1 [ 0.310210] Switch to broadcast mode on CPU0 [ 0.310210] devtmpfs: initialized [ 0.310524] regulator: core version 0.5 [ 0.310542] Time: 8:31:34 Date: 12/11/10 [ 0.310572] NET: Registered protocol family 16 [ 0.310651] node 0 link 0: io port [9000, ffff] [ 0.310653] TOM: 00000000d0000000 aka 3328M [ 0.310654] Fam 10h mmconf [e0000000, e00fffff] [ 0.310655] node 0 link 0: mmio [a0000, bffff] [ 0.310657] node 0 link 0: mmio [d0000000, dfffffff] [ 0.310659] node 0 link 0: mmio [f0000000, fe02ffff] [ 0.310661] node 0 link 0: mmio [e0000000, e06fffff] ==> [e0100000, e06fffff] [ 0.310663] TOM2: 0000000130000000 aka 4864M [ 0.310664] bus: [00, 06] on node 0 link 0 [ 0.310666] bus: 00 index 0 [io 0x0000-0xffff] [ 0.310668] bus: 00 index 1 [mem 0x000a0000-0x000bffff] [ 0.310669] bus: 00 index 2 [mem 0xd0000000-0xdfffffff] [ 0.310670] bus: 00 index 3 [mem 0xe0700000-0xffffffff] [ 0.310671] bus: 00 index 4 [mem 0xe0100000-0xe06fffff] [ 0.310672] bus: 00 index 5 [mem 0x130000000-0xfcffffffff] [ 0.310679] ACPI: bus type pci registered [ 0.310724] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.310726] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.320052] Trying to unpack rootfs image as initramfs... [ 0.320003] PCI: Using configuration type 1 for base access [ 0.330170] bio: create slab at 0 [ 0.330703] ACPI: EC: Look up EC in DSDT [ 0.331490] ACPI: Actual Package length (1) is larger than NumElements field (0), truncated [ 0.331492] [ 0.331497] ACPI: Actual Package length (1) is larger than NumElements field (0), truncated [ 0.331499] [ 0.331523] ACPI: Actual Package length (1) is larger than NumElements field (0), truncated [ 0.331524] [ 0.331528] ACPI: Actual Package length (1) is larger than NumElements field (0), truncated [ 0.331530] [ 0.335774] ACPI: Interpreter enabled [ 0.335776] ACPI: (supports S0 S3 S4 S5) [ 0.335790] ACPI: Using IOAPIC for interrupt routing [ 0.338969] ACPI: No dock devices found. [ 0.338972] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.339055] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.339210] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] [ 0.339212] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] [ 0.339214] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.339215] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] [ 0.339217] pci_root PNP0A03:00: host bridge window [mem 0xcff00000-0xfebfffff] [ 0.339235] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit] [ 0.339302] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.339304] pci 0000:00:09.0: PME# disabled [ 0.339332] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.339334] pci 0000:00:0a.0: PME# disabled [ 0.339366] pci 0000:00:11.0: reg 10: [io 0xff00-0xff07] [ 0.339371] pci 0000:00:11.0: reg 14: [io 0xfe00-0xfe03] [ 0.339376] pci 0000:00:11.0: reg 18: [io 0xfd00-0xfd07] [ 0.339380] pci 0000:00:11.0: reg 1c: [io 0xfc00-0xfc03] [ 0.339385] pci 0000:00:11.0: reg 20: [io 0xfb00-0xfb0f] [ 0.339389] pci 0000:00:11.0: reg 24: [mem 0xfe02f000-0xfe02f3ff] [ 0.339433] pci 0000:00:12.0: reg 10: [mem 0xfe02e000-0xfe02efff] [ 0.339478] pci 0000:00:12.2: reg 10: [mem 0xfe02d000-0xfe02d0ff] [ 0.339513] pci 0000:00:12.2: supports D1 D2 [ 0.339514] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.339517] pci 0000:00:12.2: PME# disabled [ 0.339538] pci 0000:00:13.0: reg 10: [mem 0xfe02c000-0xfe02cfff] [ 0.339583] pci 0000:00:13.2: reg 10: [mem 0xfe02b000-0xfe02b0ff] [ 0.339618] pci 0000:00:13.2: supports D1 D2 [ 0.339619] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.339622] pci 0000:00:13.2: PME# disabled [ 0.339685] pci 0000:00:14.2: reg 10: [mem 0xfe024000-0xfe027fff 64bit] [ 0.339714] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.339717] pci 0000:00:14.2: PME# disabled [ 0.339787] pci 0000:00:14.5: reg 10: [mem 0xfe02a000-0xfe02afff] [ 0.340000] pci 0000:00:15.0: supports D1 D2 [ 0.340000] pci 0000:00:15.1: supports D1 D2 [ 0.340000] pci 0000:00:16.0: reg 10: [mem 0xfe029000-0xfe029fff] [ 0.340000] pci 0000:00:16.2: reg 10: [mem 0xfe028000-0xfe0280ff] [ 0.340000] pci 0000:00:16.2: supports D1 D2 [ 0.340000] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot [ 0.340000] pci 0000:00:16.2: PME# disabled [ 0.340000] pci 0000:01:05.0: reg 10: [mem 0xd0000000-0xdfffffff pref] [ 0.340000] pci 0000:01:05.0: reg 14: [io 0xde00-0xdeff] [ 0.340000] pci 0000:01:05.0: reg 18: [mem 0xfdee0000-0xfdeeffff] [ 0.340000] pci 0000:01:05.0: reg 24: [mem 0xfdd00000-0xfddfffff] [ 0.340000] pci 0000:01:05.0: supports D1 D2 [ 0.340000] pci 0000:01:05.1: reg 10: [mem 0xfdefc000-0xfdefffff] [ 0.340000] pci 0000:01:05.1: supports D1 D2 [ 0.340000] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.340000] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff] [ 0.340000] pci 0000:00:01.0: bridge window [mem 0xfdd00000-0xfdefffff] [ 0.340000] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.340000] pci 0000:02:00.0: reg 10: [mem 0xfdafe000-0xfdafffff 64bit] [ 0.340000] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.340000] pci 0000:02:00.0: PME# disabled [ 0.360030] pci 0000:00:09.0: PCI bridge to [bus 02-02] [ 0.360035] pci 0000:00:09.0: bridge window [io 0xc000-0xcfff] [ 0.360038] pci 0000:00:09.0: bridge window [mem 0xfda00000-0xfdafffff] [ 0.360041] pci 0000:00:09.0: bridge window [mem 0xfd500000-0xfd5fffff 64bit pref] [ 0.360083] pci 0000:03:00.0: reg 10: [io 0xee00-0xeeff] [ 0.360096] pci 0000:03:00.0: reg 18: [mem 0xfdfff000-0xfdffffff 64bit pref] [ 0.360105] pci 0000:03:00.0: reg 20: [mem 0xfdff8000-0xfdffbfff 64bit pref] [ 0.360110] pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.360138] pci 0000:03:00.0: supports D1 D2 [ 0.360139] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.360142] pci 0000:03:00.0: PME# disabled [ 0.390027] pci 0000:00:0a.0: PCI bridge to [bus 03-03] [ 0.390032] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] [ 0.390034] pci 0000:00:0a.0: bridge window [mem 0xfd400000-0xfd4fffff] [ 0.390037] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref] [ 0.390087] pci 0000:00:14.4: PCI bridge to [bus 04-04] (subtractive decode) [ 0.390090] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff] [ 0.390093] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff] [ 0.390096] pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff pref] [ 0.390098] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.390100] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.390101] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.390103] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode) [ 0.390104] pci 0000:00:14.4: bridge window [mem 0xcff00000-0xfebfffff] (subtractive decode) [ 0.390181] pci 0000:05:00.0: reg 10: [io 0xaf00-0xaf07] [ 0.390189] pci 0000:05:00.0: reg 14: [io 0xae00-0xae03] [ 0.390196] pci 0000:05:00.0: reg 18: [io 0xad00-0xad07] [ 0.390204] pci 0000:05:00.0: reg 1c: [io 0xac00-0xac03] [ 0.390211] pci 0000:05:00.0: reg 20: [io 0xab00-0xab0f] [ 0.390271] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.390279] pci 0000:00:15.0: PCI bridge to [bus 05-05] [ 0.390283] pci 0000:00:15.0: bridge window [io 0xa000-0xafff] [ 0.390286] pci 0000:00:15.0: bridge window [mem 0xfd900000-0xfd9fffff] [ 0.390290] pci 0000:00:15.0: bridge window [mem 0xfd800000-0xfd8fffff 64bit pref] [ 0.390324] pci 0000:00:15.1: PCI bridge to [bus 06-06] [ 0.390328] pci 0000:00:15.1: bridge window [io 0x9000-0x9fff] [ 0.390330] pci 0000:00:15.1: bridge window [mem 0xfd700000-0xfd7fffff] [ 0.390334] pci 0000:00:15.1: bridge window [mem 0xfd600000-0xfd6fffff 64bit pref] [ 0.390355] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.390563] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 0.390599] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT] [ 0.390641] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] [ 0.390697] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE9._PRT] [ 0.390730] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT] [ 0.390766] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 0.404774] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0 [ 0.404841] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0 [ 0.404905] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0 [ 0.404970] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0 [ 0.405032] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0 [ 0.405095] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0 [ 0.405161] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0 [ 0.405223] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0 [ 0.405248] HEST: Table is not found! [ 0.405307] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none [ 0.405310] vgaarb: loaded [ 0.405396] SCSI subsystem initialized [ 0.410056] libata version 3.00 loaded. [ 0.410056] usbcore: registered new interface driver usbfs [ 0.410056] usbcore: registered new interface driver hub [ 0.410056] usbcore: registered new device driver usb [ 0.410056] ACPI: WMI: Mapper loaded [ 0.410056] PCI: Using ACPI for IRQ routing [ 0.410056] PCI: pci_cache_line_size set to 64 bytes [ 0.410056] pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit] [ 0.410056] reserve RAM buffer: 000000000009a000 - 000000000009ffff [ 0.410056] reserve RAM buffer: 00000000cfcf0000 - 00000000cfffffff [ 0.410056] NetLabel: Initializing [ 0.410056] NetLabel: domain hash size = 128 [ 0.410056] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.410056] NetLabel: unlabeled traffic allowed by default [ 0.410056] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.410056] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.410056] Switching to clocksource tsc [ 0.414908] AppArmor: AppArmor Filesystem Enabled [ 0.414920] pnp: PnP ACPI init [ 0.414934] ACPI: bus type pnp registered [ 0.415484] pnp 00:02: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.415505] pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:03:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref] [ 0.416546] pnp 00:0a: disabling [mem 0x000d4200-0x000d7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.416549] pnp 00:0a: disabling [mem 0x000f0000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.416551] pnp 00:0a: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.416554] pnp 00:0a: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.416556] pnp 00:0a: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.416559] pnp 00:0a: disabling [mem 0x00100000-0xcfceffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.416624] pnp: PnP ACPI: found 11 devices [ 0.416625] ACPI: ACPI bus type pnp unregistered [ 0.416632] system 00:01: [io 0x04d0-0x04d1] has been reserved [ 0.416633] system 00:01: [io 0x0220-0x0225] has been reserved [ 0.416635] system 00:01: [io 0x0290-0x0294] has been reserved [ 0.416638] system 00:02: [io 0x4100-0x411f] has been reserved [ 0.416640] system 00:02: [io 0x0228-0x022f] has been reserved [ 0.416642] system 00:02: [io 0x040b] has been reserved [ 0.416643] system 00:02: [io 0x04d6] has been reserved [ 0.416645] system 00:02: [io 0x0c00-0x0c01] has been reserved [ 0.416646] system 00:02: [io 0x0c14] has been reserved [ 0.416648] system 00:02: [io 0x0c50-0x0c52] has been reserved [ 0.416650] system 00:02: [io 0x0c6c-0x0c6d] has been reserved [ 0.416651] system 00:02: [io 0x0c6f] has been reserved [ 0.416653] system 00:02: [io 0x0cd0-0x0cd1] has been reserved [ 0.416654] system 00:02: [io 0x0cd2-0x0cd3] has been reserved [ 0.416656] system 00:02: [io 0x0cd4-0x0cdf] has been reserved [ 0.416658] system 00:02: [io 0x4000-0x40fe] has been reserved [ 0.416659] system 00:02: [io 0x4210-0x4217] has been reserved [ 0.416661] system 00:02: [io 0x0b00-0x0b0f] has been reserved [ 0.416663] system 00:02: [io 0x0b10-0x0b1f] has been reserved [ 0.416664] system 00:02: [io 0x0b20-0x0b3f] has been reserved [ 0.416666] system 00:02: [mem 0xfee00400-0xfee00fff window] has been reserved [ 0.416670] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved [ 0.416674] system 00:0a: [mem 0xcfcf0000-0xcfcfffff] could not be reserved [ 0.416676] system 00:0a: [mem 0xffff0000-0xffffffff] has been reserved [ 0.416677] system 00:0a: [mem 0xcfd00000-0xcfdfffff] has been reserved [ 0.416679] system 00:0a: [mem 0xcfe00000-0xcfefffff] could not be reserved [ 0.416681] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.416683] system 00:0a: [mem 0xfee00000-0xfee00fff] could not be reserved [ 0.416685] system 00:0a: [mem 0xfff80000-0xfffeffff] has been reserved [ 0.421981] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.421983] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff] [ 0.421986] pci 0000:00:01.0: bridge window [mem 0xfdd00000-0xfdefffff] [ 0.421988] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.421991] pci 0000:00:09.0: PCI bridge to [bus 02-02] [ 0.421993] pci 0000:00:09.0: bridge window [io 0xc000-0xcfff] [ 0.421995] pci 0000:00:09.0: bridge window [mem 0xfda00000-0xfdafffff] [ 0.421998] pci 0000:00:09.0: bridge window [mem 0xfd500000-0xfd5fffff 64bit pref] [ 0.422002] pci 0000:03:00.0: BAR 6: assigned [mem 0xfdf00000-0xfdf1ffff pref] [ 0.422004] pci 0000:00:0a.0: PCI bridge to [bus 03-03] [ 0.422006] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] [ 0.422008] pci 0000:00:0a.0: bridge window [mem 0xfd400000-0xfd4fffff] [ 0.422011] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref] [ 0.422014] pci 0000:00:14.4: PCI bridge to [bus 04-04] [ 0.422016] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff] [ 0.422019] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff] [ 0.422023] pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff pref] [ 0.422027] pci 0000:00:15.0: PCI bridge to [bus 05-05] [ 0.422029] pci 0000:00:15.0: bridge window [io 0xa000-0xafff] [ 0.422033] pci 0000:00:15.0: bridge window [mem 0xfd900000-0xfd9fffff] [ 0.422074] pci 0000:00:15.0: bridge window [mem 0xfd800000-0xfd8fffff 64bit pref] [ 0.422078] pci 0000:00:15.1: PCI bridge to [bus 06-06] [ 0.422080] pci 0000:00:15.1: bridge window [io 0x9000-0x9fff] [ 0.422083] pci 0000:00:15.1: bridge window [mem 0xfd700000-0xfd7fffff] [ 0.422086] pci 0000:00:15.1: bridge window [mem 0xfd600000-0xfd6fffff 64bit pref] [ 0.422098] alloc irq_desc for 17 on node 0 [ 0.422099] alloc kstat_irqs on node 0 [ 0.422106] pci 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.422108] pci 0000:00:09.0: setting latency timer to 64 [ 0.422112] alloc irq_desc for 18 on node 0 [ 0.422113] alloc kstat_irqs on node 0 [ 0.422118] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.422120] pci 0000:00:0a.0: setting latency timer to 64 [ 0.422129] pci 0000:00:15.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.422131] pci 0000:00:15.0: setting latency timer to 64 [ 0.422137] pci 0000:00:15.1: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.422140] pci 0000:00:15.1: setting latency timer to 64 [ 0.422143] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.422144] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.422146] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.422147] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff] [ 0.422149] pci_bus 0000:00: resource 8 [mem 0xcff00000-0xfebfffff] [ 0.422151] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] [ 0.422153] pci_bus 0000:01: resource 1 [mem 0xfdd00000-0xfdefffff] [ 0.422154] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.422156] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff] [ 0.422158] pci_bus 0000:02: resource 1 [mem 0xfda00000-0xfdafffff] [ 0.422159] pci_bus 0000:02: resource 2 [mem 0xfd500000-0xfd5fffff 64bit pref] [ 0.422161] pci_bus 0000:03: resource 0 [io 0xe000-0xefff] [ 0.422163] pci_bus 0000:03: resource 1 [mem 0xfd400000-0xfd4fffff] [ 0.422165] pci_bus 0000:03: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref] [ 0.422166] pci_bus 0000:04: resource 0 [io 0xb000-0xbfff] [ 0.422168] pci_bus 0000:04: resource 1 [mem 0xfdc00000-0xfdcfffff] [ 0.422170] pci_bus 0000:04: resource 2 [mem 0xfdb00000-0xfdbfffff pref] [ 0.422171] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7] [ 0.422173] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff] [ 0.422174] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff] [ 0.422176] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000dffff] [ 0.422177] pci_bus 0000:04: resource 8 [mem 0xcff00000-0xfebfffff] [ 0.422179] pci_bus 0000:05: resource 0 [io 0xa000-0xafff] [ 0.422181] pci_bus 0000:05: resource 1 [mem 0xfd900000-0xfd9fffff] [ 0.422182] pci_bus 0000:05: resource 2 [mem 0xfd800000-0xfd8fffff 64bit pref] [ 0.422184] pci_bus 0000:06: resource 0 [io 0x9000-0x9fff] [ 0.422186] pci_bus 0000:06: resource 1 [mem 0xfd700000-0xfd7fffff] [ 0.422187] pci_bus 0000:06: resource 2 [mem 0xfd600000-0xfd6fffff 64bit pref] [ 0.422218] NET: Registered protocol family 2 [ 0.422323] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.423177] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.425438] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.425717] TCP: Hash tables configured (established 524288 bind 65536) [ 0.425719] TCP reno registered [ 0.425730] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.425755] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.425849] NET: Registered protocol family 1 [ 0.425858] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled [ 0.473793] Freeing initrd memory: 10744k freed [ 0.542155] pci 0000:01:05.0: Boot video device [ 0.542178] PCI: CLS 4 bytes, default 64 [ 0.542842] PCI-DMA: Disabling AGP. [ 0.542900] PCI-DMA: aperture base @ 20000000 size 65536 KB [ 0.542901] PCI-DMA: using GART IOMMU. [ 0.542903] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 0.545193] Scanning for low memory corruption every 60 seconds [ 0.545300] audit: initializing netlink socket (disabled) [ 0.545308] type=2000 audit(1292056293.540:1): initialized [ 0.553872] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.554751] VFS: Disk quotas dquot_6.5.2 [ 0.554792] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.555190] fuse init (API version 7.14) [ 0.555276] msgmni has been set to 6904 [ 0.556769] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.556772] io scheduler noop registered [ 0.556773] io scheduler deadline registered [ 0.556795] io scheduler cfq registered (default) [ 0.556941] pcieport 0000:00:09.0: setting latency timer to 64 [ 0.556959] alloc irq_desc for 40 on node 0 [ 0.556960] alloc kstat_irqs on node 0 [ 0.556967] pcieport 0000:00:09.0: irq 40 for MSI/MSI-X [ 0.557066] pcieport 0000:00:0a.0: setting latency timer to 64 [ 0.557080] alloc irq_desc for 41 on node 0 [ 0.557081] alloc kstat_irqs on node 0 [ 0.557084] pcieport 0000:00:0a.0: irq 41 for MSI/MSI-X [ 0.557157] pcieport 0000:00:15.0: setting latency timer to 64 [ 0.557183] alloc irq_desc for 42 on node 0 [ 0.557184] alloc kstat_irqs on node 0 [ 0.557189] pcieport 0000:00:15.0: irq 42 for MSI/MSI-X [ 0.557273] pcieport 0000:00:15.1: setting latency timer to 64 [ 0.557298] alloc irq_desc for 43 on node 0 [ 0.557299] alloc kstat_irqs on node 0 [ 0.557304] pcieport 0000:00:15.1: irq 43 for MSI/MSI-X [ 0.557393] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.557447] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.557558] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.557561] ACPI: Power Button [PWRB] [ 0.557590] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.557592] ACPI: Power Button [PWRF] [ 0.557761] ACPI: acpi_idle registered with cpuidle [ 0.557775] ACPI: processor limited to max C-state 1 [ 0.559143] ERST: Table is not found! [ 0.559222] Linux agpgart interface v0.103 [ 0.559224] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.559307] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.559500] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.560099] brd: module loaded [ 0.560368] loop: module loaded [ 0.560565] pata_acpi 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.560588] pata_acpi 0000:05:00.0: setting latency timer to 64 [ 0.560603] pata_acpi 0000:05:00.0: PCI INT A disabled [ 0.560807] Fixed MDIO Bus: probed [ 0.560827] PPP generic driver version 2.4.2 [ 0.560855] tun: Universal TUN/TAP device driver, 1.6 [ 0.560856] tun: (C) 1999-2004 Max Krasnyansky [ 0.560903] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.560964] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.560988] ehci_hcd 0000:00:12.2: EHCI Host Controller [ 0.561045] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 0.561095] ehci_hcd 0000:00:12.2: debug port 1 [ 0.561118] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02d000 [ 0.572122] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 0.572224] hub 1-0:1.0: USB hub found [ 0.572227] hub 1-0:1.0: 5 ports detected [ 0.572337] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.572353] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 0.572379] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 0.572401] ehci_hcd 0000:00:13.2: debug port 1 [ 0.572413] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfe02b000 [ 0.592136] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 0.592232] hub 2-0:1.0: USB hub found [ 0.592236] hub 2-0:1.0: 5 ports detected [ 0.592346] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.592363] ehci_hcd 0000:00:16.2: EHCI Host Controller [ 0.592393] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3 [ 0.592414] ehci_hcd 0000:00:16.2: debug port 1 [ 0.592425] ehci_hcd 0000:00:16.2: irq 17, io mem 0xfe028000 [ 0.612138] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00 [ 0.612235] hub 3-0:1.0: USB hub found [ 0.612238] hub 3-0:1.0: 4 ports detected [ 0.612319] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.612366] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.612383] ohci_hcd 0000:00:12.0: OHCI Host Controller [ 0.612407] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4 [ 0.612433] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfe02e000 [ 0.676244] hub 4-0:1.0: USB hub found [ 0.676249] hub 4-0:1.0: 5 ports detected [ 0.676366] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.676383] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 0.676407] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 0.676422] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02c000 [ 0.736230] hub 5-0:1.0: USB hub found [ 0.736236] hub 5-0:1.0: 5 ports detected [ 0.736354] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.736372] ohci_hcd 0000:00:14.5: OHCI Host Controller [ 0.736396] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6 [ 0.736411] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe02a000 [ 0.796244] hub 6-0:1.0: USB hub found [ 0.796250] hub 6-0:1.0: 2 ports detected [ 0.796363] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.796381] ohci_hcd 0000:00:16.0: OHCI Host Controller [ 0.796408] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7 [ 0.796423] ohci_hcd 0000:00:16.0: irq 18, io mem 0xfe029000 [ 0.856238] hub 7-0:1.0: USB hub found [ 0.856244] hub 7-0:1.0: 4 ports detected [ 0.856335] uhci_hcd: USB Universal Host Controller Interface driver [ 0.856417] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 0.856418] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 0.856537] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.856605] mice: PS/2 mouse device common for all mice [ 0.856674] rtc_cmos 00:04: RTC can wake from S4 [ 0.856697] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 0.856720] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 0.856773] device-mapper: uevent: version 1.0.3 [ 0.856844] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com [ 0.856916] device-mapper: multipath: version 1.1.1 loaded [ 0.856919] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.857081] cpuidle: using governor ladder [ 0.857083] cpuidle: using governor menu [ 0.857245] TCP cubic registered [ 0.857321] NET: Registered protocol family 10 [ 0.857553] lo: Disabled Privacy Extensions [ 0.857669] NET: Registered protocol family 17 [ 0.857695] powernow-k8: Found 1 AMD Athlon(tm) II X2 265 Processor (2 cpu cores) (version 2.20.00) [ 0.857725] powernow-k8: 0 : pstate 0 (3300 MHz) [ 0.857727] powernow-k8: 1 : pstate 1 (2600 MHz) [ 0.857728] powernow-k8: 2 : pstate 2 (1900 MHz) [ 0.857729] powernow-k8: 3 : pstate 3 (800 MHz) [ 0.857876] PM: Resume from disk failed. [ 0.857883] registered taskstats version 1 [ 0.858096] Magic number: 6:188:523 [ 0.858127] ehci_hcd 0000:00:12.2: hash matches [ 0.858166] rtc_cmos 00:04: setting system clock to 2010-12-11 08:31:34 UTC (1292056294) [ 0.858168] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.858169] EDD information not available. [ 0.858215] Freeing unused kernel memory: 908k freed [ 0.858413] Write protecting the kernel read-only data: 10240k [ 0.858518] Freeing unused kernel memory: 412k freed [ 0.858704] Freeing unused kernel memory: 1644k freed [ 0.873636] udev[116]: starting version 163 [ 0.876896] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 0.912146] usb 1-2: new high speed USB device using ehci_hcd and address 2 [ 0.928558] ahci 0000:00:11.0: version 3.0 [ 0.928569] alloc irq_desc for 19 on node 0 [ 0.928571] alloc kstat_irqs on node 0 [ 0.928580] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 0.928624] alloc irq_desc for 44 on node 0 [ 0.928625] alloc kstat_irqs on node 0 [ 0.928632] ahci 0000:00:11.0: irq 44 for MSI/MSI-X [ 0.928722] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 0.928725] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part [ 0.929033] pata_jmicron 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.929059] pata_jmicron 0000:05:00.0: setting latency timer to 64 [ 0.935489] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 0.935507] r8169 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.935548] r8169 0000:03:00.0: setting latency timer to 64 [ 0.935577] alloc irq_desc for 45 on node 0 [ 0.935578] alloc kstat_irqs on node 0 [ 0.935588] r8169 0000:03:00.0: irq 45 for MSI/MSI-X [ 0.935894] r8169 0000:03:00.0: eth0: RTL8168d/8111d at 0xffffc90011088000, 1c:6f:65:29:64:55, XID 083000c0 IRQ 45 [ 0.980718] scsi1 : pata_jmicron [ 0.980793] scsi0 : ahci [ 0.982932] scsi2 : pata_jmicron [ 0.982968] ata7: PATA max UDMA/100 cmd 0xaf00 ctl 0xae00 bmdma 0xab00 irq 17 [ 0.982970] ata8: PATA max UDMA/100 cmd 0xad00 ctl 0xac00 bmdma 0xab08 irq 17 [ 0.983274] scsi3 : ahci [ 0.983406] scsi4 : ahci [ 0.984032] scsi5 : ahci [ 0.984113] scsi6 : ahci [ 0.984152] scsi7 : ahci [ 0.984251] ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 44 [ 0.984254] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 44 [ 0.984257] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 44 [ 0.984259] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 44 [ 0.984261] ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f300 irq 44 [ 0.984264] ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f380 irq 44 [ 1.171214] ata7.01: ATAPI: TSSTcorp CDDVDW SH-S202J, SB01, max UDMA/66 [ 1.211224] ata7.01: configured for UDMA/66 [ 1.212271] scsi 1:0:1:0: CD-ROM TSSTcorp CDDVDW SH-S202J SB01 PQ: 0 ANSI: 5 [ 1.214244] sr0: scsi3-mmc drive: 32x/40x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.214247] Uniform CD-ROM driver Revision: 3.20 [ 1.214339] sr 1:0:1:0: Attached scsi CD-ROM sr0 [ 1.214381] sr 1:0:1:0: Attached scsi generic sg0 type 5 [ 1.220073] usb 1-5: new high speed USB device using ehci_hcd and address 3 [ 1.340065] ata4: SATA link down (SStatus 0 SControl 300) [ 1.340090] ata6: SATA link down (SStatus 0 SControl 300) [ 1.340109] ata3: SATA link down (SStatus 0 SControl 300) [ 1.340128] ata1: SATA link down (SStatus 0 SControl 300) [ 1.372150] hub 1-5:1.0: USB hub found [ 1.372236] hub 1-5:1.0: 4 ports detected [ 1.550062] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.550073] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.552740] ata5.00: ATA-7: FUJITSU MHV2120BH PL, 00000029, max UDMA/100 [ 1.552743] ata5.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.557404] ata5.00: configured for UDMA/100 [ 1.595033] ata2.00: ATA-8: OCZ-VERTEX2 3.5, 1.23, max UDMA/133 [ 1.595035] ata2.00: 175836528 sectors, multi 1: LBA48 NCQ (depth 31/32), AA [ 1.625047] ata2.00: configured for UDMA/133 [ 1.640183] scsi 3:0:0:0: Direct-Access ATA OCZ-VERTEX2 3.5 1.23 PQ: 0 ANSI: 5 [ 1.640303] sd 3:0:0:0: Attached scsi generic sg1 type 0 [ 1.640315] sd 3:0:0:0: [sda] 175836528 512-byte logical blocks: (90.0 GB/83.8 GiB) [ 1.640384] sd 3:0:0:0: [sda] Write Protect is off [ 1.640386] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.640389] scsi 6:0:0:0: Direct-Access ATA FUJITSU MHV2120B 0000 PQ: 0 ANSI: 5 [ 1.640397] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.640469] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 1.640475] sd 6:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/111 GiB) [ 1.640502] sd 6:0:0:0: [sdb] Write Protect is off [ 1.640503] sd 6:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.640513] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.640571] sdb: [ 1.640678] sda: sda1 sda2 < sda5 > [ 1.641355] sd 3:0:0:0: [sda] Attached SCSI disk [ 1.724958] sdb1 [ 1.725127] sd 6:0:0:0: [sdb] Attached SCSI disk [ 1.730664] usb 5-1: new low speed USB device using ohci_hcd and address 2 [ 1.780657] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 1.985297] udev[463]: starting version 163 [ 3.687119] Adding 1979388k swap on /dev/sda5. Priority:-1 extents:1 across:1979388k SS [ 3.705561] lp: driver loaded but no devices found [ 3.770544] it87: Found IT8720F chip at 0x228, revision 8 [ 3.770562] it87: Routing internal VCCH to in7 [ 3.770563] it87: in3 is VCC (+5V) [ 3.770564] it87: in7 is VCCH (+5V Stand-By) [ 3.770574] it87: Beeping is supported [ 3.798145] EDAC MC: Ver: 2.1.0 Nov 24 2010 [ 3.803567] xhci_hcd 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 3.803589] xhci_hcd 0000:02:00.0: setting latency timer to 64 [ 3.803591] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 3.803736] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 8 [ 3.803844] xhci_hcd 0000:02:00.0: irq 17, io mem 0xfdafe000 [ 3.807204] usb usb8: No SuperSpeed endpoint companion for config 1 interface 0 altsetting 0 ep 129: using minimum values [ 3.807260] xHCI xhci_add_endpoint called for root hub [ 3.807261] xHCI xhci_check_bandwidth called for root hub [ 3.807282] hub 8-0:1.0: USB hub found [ 3.807285] hub 8-0:1.0: 4 ports detected [ 3.847567] ACPI: resource piix4_smbus [io 0x0b00-0x0b07] conflicts with ACPI region SOR1 [io 0x0b00-0x0b0f 64bit] [ 3.847569] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 3.852294] EDAC amd64_edac: Ver: 3.3.0 Nov 24 2010 [ 3.861898] Linux video capture interface: v2.00 [ 3.863803] uvcvideo: Found UVC 1.00 device Venus USB2.0 Camera (0ac8:3420) [ 3.872325] shpchp 0000:00:01.0: HPC vendor_id 1022 device_id 9602 ss_vid 1022 ss_did 9602 [ 3.872329] shpchp 0000:00:01.0: Cannot reserve MMIO region [ 3.872401] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 3.882815] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3). [ 3.882822] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 3.882823] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 3.882824] (Note that use of the override may cause unknown side effects.) [ 3.882833] amd64_edac: probe of 0000:00:18.2 failed with error -22 [ 3.894559] usbcore: registered new interface driver hiddev [ 3.895457] input: Venus USB2.0 Camera as /devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2:1.0/input/input3 [ 3.895525] usbcore: registered new interface driver uvcvideo [ 3.895527] USB Video Class driver (v0.1.0) [ 3.897076] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 3.897080] Disabling lock debugging due to kernel taint [ 3.903692] input: Microsoft Microsoft Wireless Optical Desktop® 1.00 as /devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.0/input/input4 [ 3.903752] generic-usb 0003:045E:006A.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical Desktop® 1.00] on usb-0000:00:13.0-1/input0 [ 3.903767] usbcore: registered new interface driver usbhid [ 3.903769] usbhid: USB HID core driver [ 3.932627] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 3.932750] type=1400 audit(1292056297.565:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=740 comm="apparmor_parser" [ 3.932929] type=1400 audit(1292056297.565:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=740 comm="apparmor_parser" [ 3.933029] type=1400 audit(1292056297.565:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=740 comm="apparmor_parser" [ 3.944771] type=1400 audit(1292056297.575:5): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=816 comm="apparmor_parser" [ 3.950184] alloc irq_desc for 16 on node 0 [ 3.950187] alloc kstat_irqs on node 0 [ 3.950196] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.953672] [fglrx] Maximum main memory to use for locked dma buffers: 3302 MBytes. [ 3.953709] [fglrx] vendor: 1002 device: 9715 count: 1 [ 3.953993] [fglrx] ioport: bar 1, base 0xde00, size: 0x100 [ 3.954005] pci 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 3.954010] pci 0000:01:05.0: setting latency timer to 64 [ 3.954278] [fglrx] Kernel PAT support is enabled [ 3.954292] [fglrx] module loaded - fglrx 8.78.30 [Sep 20 2010] with 1 minors [ 4.055855] hda_codec: ALC892: BIOS auto-probing. [ 4.062800] Too many connections [ 4.064163] HDA Intel 0000:01:05.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 4.064212] HDA Intel 0000:01:05.1: setting latency timer to 64 [ 4.120840] usb 8-3: new full speed USB device using xhci_hcd and address 0 [ 4.150278] xhci_hcd 0000:02:00.0: WARN: Stalled endpoint [ 4.152261] xhci_hcd 0000:02:00.0: WARN: Stalled endpoint [ 4.154279] xhci_hcd 0000:02:00.0: WARN: Stalled endpoint [ 4.165284] xhci_hcd 0000:02:00.0: WARN: short transfer on control ep [ 4.169299] xhci_hcd 0000:02:00.0: WARN: short transfer on control ep [ 4.173295] xhci_hcd 0000:02:00.0: WARN: short transfer on control ep [ 4.179307] xhci_hcd 0000:02:00.0: WARN: short transfer on control ep [ 4.183293] xhci_hcd 0000:02:00.0: WARN: Stalled endpoint [ 4.189442] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:09.0/0000:02:00.0/usb8/8-3/8-3:1.0/input/input5 [ 4.189518] generic-usb 0003:046D:C526.0002: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:02:00.0-3/input0 [ 4.191264] xhci_hcd 0000:02:00.0: WARN: Stalled endpoint [ 4.199286] xhci_hcd 0000:02:00.0: WARN: short transfer on control ep [ 4.203289] xhci_hcd 0000:02:00.0: WARN: short transfer on control ep [ 4.207297] xhci_hcd 0000:02:00.0: WARN: short transfer on control ep [ 4.209391] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:09.0/0000:02:00.0/usb8/8-3/8-3:1.1/input/input6 [ 4.209495] generic-usb 0003:046D:C526.0003: input,hiddev96,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:02:00.0-3/input1 [ 4.518369] r8169 0000:03:00.0: eth0: link up [ 4.518361] r8169 0000:03:00.0: eth0: link up [ 4.520685] type=1400 audit(1292056298.155:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=1104 comm="apparmor_parser" [ 4.520866] type=1400 audit(1292056298.155:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1104 comm="apparmor_parser" [ 4.520964] type=1400 audit(1292056298.155:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1104 comm="apparmor_parser" [ 4.521108] type=1400 audit(1292056298.155:9): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=1103 comm="apparmor_parser" [ 4.527182] type=1400 audit(1292056298.155:10): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=1106 comm="apparmor_parser"