-> % hp-check -t Saving output in log file: /home/luca/hp-check.log HP Linux Imaging and Printing System (ver. 3.18.12) Dependency/Version Check Utility ver. 15.1 Copyright (c) 2001-15 HP Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details. Note: hp-check can be run in three modes: 1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies are installed to successfully compile HPLIP. 2. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball has the proper dependencies installed to successfully run. 3. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the above cases (both compile- and run-time dependencies). Check types: a. EXTERNALDEP - External Dependencies b. GENERALDEP - General Dependencies (required both at compile and run time) c. COMPILEDEP - Compile time Dependencies d. [All are run-time checks] PYEXT SCANCONF QUEUES PERMISSION Status Types: OK MISSING - Missing Dependency or Permission or Plug-in INCOMPAT - Incompatible dependency-version or Plugin-version warning: 26-18.0.2 version is not supported. Using 26-17.1.4 versions dependencies to verify and install... --------------- | SYSTEM INFO | --------------- Kernel: 4.20.0-1-MANJARO #1 SMP PREEMPT Mon Dec 24 08:20:48 UTC 2018 GNU/Linux Host: thermaltake Proc: 4.20.0-1-MANJARO #1 SMP PREEMPT Mon Dec 24 08:20:48 UTC 2018 GNU/Linux Distribution: 26 18.0.2 Bitness: 64 bit ----------------------- | HPLIP CONFIGURATION | ----------------------- HPLIP-Version: HPLIP 3.18.12 HPLIP-Home: /usr/share/hplip warning: HPLIP-Installation: Auto installation is not supported for 26 distro 18.0.2 version Current contents of '/etc/hp/hplip.conf' file: # hplip.conf. Generated from hplip.conf.in by configure. [hplip] version=3.18.12 [dirs] home=/usr/share/hplip run=/var/run ppd=/usr/share/ppd/HP ppdbase=/usr/share/ppd doc=/usr/share/doc/hplip-3.18.12 html=/usr/share/doc/hplip-3.18.12 icon=/usr/share/applications cupsbackend=/usr/lib/cups/backend cupsfilter=/usr/lib/cups/filter drv=/usr/share/cups/drv/hp bin=/usr/bin apparmor=/etc/apparmor.d # Following values are determined at configure time and cannot be changed. [configure] network-build=yes libusb01-build=no pp-build=yes gui-build=yes scanner-build=yes fax-build=yes dbus-build=yes cups11-build=no doc-build=yes shadow-build=no hpijs-install=no foomatic-drv-install=no foomatic-ppd-install=no foomatic-rip-hplip-install=no hpcups-install=yes cups-drv-install=yes cups-ppd-install=no internal-tag=3.18.12 restricted-build=no ui-toolkit=qt5 qt3=no qt4=no qt5=yes policy-kit=no lite-build=no udev_sysfs_rules=no hpcups-only-build=no hpijs-only-build=no apparmor_build=no class-driver=no Current contents of '/var/lib/hp/hplip.state' file: [plugin] installed = 1 eula = 1 version = 3.18.12 Current contents of '~/.hplip/hplip.conf' file: [commands] scan = /usr/bin/xsane -V %SANE_URI% [fax] email_address = voice_phone = [installation] date_time = 01/11/19 10:48:55 version = 3.18.12 [last_used] device_uri = hpaio:/usb/HP_LaserJet_MFP_M28-M31?serial=VNC3K44877 printer_name = working_dir = . [polling] device_list = enable = false interval = 5 [refresh] enable = false rate = 30 type = 1 [settings] systray_messages = 0 systray_visible = 0 [upgrade] last_upgraded_time = 1547133800 notify_upgrade = false pending_upgrade_time = 0 ------------------------- | External Dependencies | ------------------------- cups CUPS - Common Unix Printing System REQUIRED 1.1 2.2.10 OK 'CUPS Scheduler is running' gs GhostScript - PostScript and PDF language interpreter and previewer REQUIRED 7.05 9.26 OK - xsane xsane - Graphical scanner frontend for SANE OPTIONAL 0.9 0.999 OK - scanimage scanimage - Shell scanning program OPTIONAL 1.0 1.0.27 OK - dbus DBus - Message bus system REQUIRED - 1.12.12 OK - policykit PolicyKit - Administrative policy framework OPTIONAL - 0.116 OK - network network -wget OPTIONAL - 1.20 OK - avahi-utils avahi-utils OPTIONAL - 0.7 OK - ------------------------ | General Dependencies | ------------------------ libjpeg libjpeg - JPEG library REQUIRED - - OK - cups-devel CUPS devel- Common Unix Printing System development files REQUIRED - 2.2.10 OK - cups-image CUPS image - CUPS image development files REQUIRED - 2.2.10 OK - libpthread libpthread - POSIX threads library REQUIRED - b'2.28' OK - libusb libusb - USB library REQUIRED - 1.0 OK - sane SANE - Scanning library REQUIRED - 1.0.27 OK - sane-devel SANE - Scanning library development files REQUIRED - 1.0.27 OK - libnetsnmp-devel libnetsnmp-devel - SNMP networking library development files REQUIRED 5.0.9 5.8 OK - libcrypto libcrypto - OpenSSL cryptographic library REQUIRED - 1.1.1 OK - python3X Python 2.2 or greater - Python programming language REQUIRED 2.2 3.7.1 OK - error: python3-notify2 Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL - - MISSING 'python3-notify2 needs to be installed' error: python3-pyqt4-dbus PyQt 4 DBus - DBus Support for PyQt4 OPTIONAL 4.0 - MISSING 'python3-pyqt4-dbus needs to be installed' error: python3-pyqt4 PyQt 4- Qt interface for Python (for Qt version 4.x) REQUIRED 4.0 - MISSING 'python3-pyqt4 needs to be installed' python3-dbus Python DBus - Python bindings for DBus REQUIRED 0.80.0 1.2.8 OK - python3-xml Python XML libraries REQUIRED - 2.2.6 OK - python3-devel Python devel - Python development files REQUIRED 2.2 3.7.1 OK - python3-pil PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL - 1.1.7 OK - python3-reportlab Reportlab - PDF library for Python OPTIONAL 2.0 3.5.12 OK - -------------- | COMPILEDEP | -------------- libtool libtool - Library building support services REQUIRED - 2.4.6 OK - gcc gcc - GNU Project C and C++ Compiler REQUIRED - 8.2.1 OK - make make - GNU make utility to maintain groups of programs REQUIRED 3.0 4.2.1 OK - --------------------- | Python Extentions | --------------------- cupsext CUPS-Extension REQUIRED - 3.18.12 OK - hpmudext IO-Extension REQUIRED - 3.18.12 OK - ---------------------- | Scan Configuration | ---------------------- hpaio HPLIP-SANE-Backend REQUIRED - 3.18.12 OK 'hpaio found in /etc/sane.d/dll.conf' scanext Scan-SANE-Extension REQUIRED - 3.18.12 OK - ------------------------------ | DISCOVERED SCANNER DEVICES | ------------------------------ device `hpaio:/usb/HP_LaserJet_MFP_M28-M31?serial=VNC3K44877' is a Hewlett-Packard HP_LaserJet_MFP_M28-M31 all-in-one device `hpaio:/net/hp_laserjet_mfp_m28-m31?ip=192.168.1.173&queue=false' is a Hewlett-Packard hp_laserjet_mfp_m28-m31 all-in-one -------------------------- | DISCOVERED USB DEVICES | -------------------------- Device URI Model ------------------------------------------------- ---------------------------------------------- hp:/usb/HP_LaserJet_MFP_M28-M31?serial=VNC3K44877 HP LaserJet MFP M28-M31 --------------------------------- | INSTALLED CUPS PRINTER QUEUES | --------------------------------- HP_LaserJet_MFP_M28-M31 ----------------------- Type: Printer Device URI: hp:/usb/HP_LaserJet_MFP_M28-M31?serial=VNC3K44877 PPD: /etc/cups/ppd/HP_LaserJet_MFP_M28-M31.ppd PPD Description: HP LaserJet MFP m28-m31, hpcups 3.18.12 Printer status: la stampante HP_LaserJet_MFP_M28-M31 è inattiva. è stata abilitata da gio 10 gen 2019 15:19:50 CET Communication status: Good -------------- | PERMISSION | -------------- USB HP_LaserJet_MFP_M28-M31 Required - - OK Node:'/dev/bus/usb/001/005' Perm:' root lp rw- rw- r--' ----------- | SUMMARY | ----------- Missing Required Dependencies ----------------------------- error: 'python-pyqt4' package is missing/incompatible error: 'pygtk' package is missing/incompatible Missing Optional Dependencies ----------------------------- error: 'python2-notify' package is missing/incompatible Total Errors: 3 Total Warnings: 0 Done.