hp-check -r Saving output in log file: /home/user/hp-check.log HP Linux Imaging and Printing System (ver. 3.13.9) Dependency/Version Check Utility ver. 15.1 Copyright (c) 2001-13 Hewlett-Packard Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details. Note: hp-check can be run in three modes: 1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies are installed to successfully compile HPLIP. 2. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball has the proper dependencies installed to successfully run. 3. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the above cases (both compile- and run-time dependencies). Check types: a. EXTERNALDEP - External Dependencies b. GENERALDEP - General Dependencies (required both at compile and run time) c. COMPILEDEP - Compile time Dependencies d. [All are run-time checks] PYEXT SCANCONF QUEUES PERMISSION Status Types: OK MISSING - Missing Dependency or Permission or Plug-in INCOMPAT - Incompatible dependency-version or Plugin-version warning: ubuntu-13.10 version is not supported. Using ubuntu-13.04 versions dependencies to verify and install... --------------- | SYSTEM INFO | --------------- Kernel: 3.11.0-15-generic #25-Ubuntu SMP Thu Jan 30 17:22:01 UTC 2014 GNU/Linux Host: laptop Proc: 3.11.0-15-generic #25-Ubuntu SMP Thu Jan 30 17:22:01 UTC 2014 GNU/Linux Distribution: ubuntu 13.10 Bitness: 64 bit ----------------------- | HPLIP CONFIGURATION | ----------------------- HPLIP-Version: HPLIP 3.13.9 HPLIP-Home: /usr/share/hplip warning: HPLIP-Installation: Auto installation is not supported for ubuntu distro 13.10 version Current contents of '/etc/hp/hplip.conf' file: # hplip.conf. Generated from hplip.conf.in by configure. [hplip] version=3.13.9 [dirs] home=/usr/share/hplip run=/var/run ppd=/usr/share/ppd/hplip/HP ppdbase=/usr/share/ppd/hplip doc=/usr/share/doc/hplip-doc/HTML icon=no cupsbackend=/usr/lib/cups/backend cupsfilter=/usr/lib/cups/filter drv=/usr/share/cups/drv bin=/usr/bin # Following values are determined at configure time and cannot be changed. [configure] network-build=yes libusb01-build=no pp-build=yes gui-build=yes scanner-build=yes fax-build=yes dbus-build=yes cups11-build=no doc-build=yes shadow-build=no hpijs-install=yes foomatic-drv-install=yes foomatic-ppd-install=yes foomatic-rip-hplip-install=no hpcups-install=yes cups-drv-install=yes cups-ppd-install=no internal-tag=3.13.9 restricted-build=no ui-toolkit=qt4 qt3=no qt4=yes policy-kit=yes lite-build=no udev-acl-rules=yes udev_sysfs_rules=no hpcups-only-build=no hpijs-only-build=no Current contents of '/var/lib/hp/hplip.state' file: Plugins are not installed. Could not access file: No such file or directory Current contents of '~/.hplip/hplip.conf' file: warning: Could not access file: No such file or directory

-------------------------- | External Dependencies | -------------------------- policykit Admin-Policy-framework OPTIONAL - 0.105 OK - gs Ghostscript REQUIRED 7.05 9.10 OK - network Network-wget OPTIONAL - 1.14 OK - scanimage Shell-Scanning OPTIONAL 1.0 1.0.23 OK - avahi-utils avahi-utils OPTIONAL - 0.6.31 OK - error: dbus DBus REQUIRED - 1.6.12 MISSING 'DBUS may not be installed or not running' error: cups CUPS REQUIRED 1.1 - INCOMPAT 'CUPS may not be installed or not running' xsane SANE-GUI OPTIONAL 0.9 0.998 OK - ------------------------- | General Dependencies | ------------------------- reportlab Python-PDF-Lib OPTIONAL 2.0 2.6 OK - error: libcrypto OpenSSL-Crypto-Lib REQUIRED - 1.0.1 MISSING 'libcrypto needs to be installed' pil Python-Image-Lib OPTIONAL - 1.1.7 OK - pyqt4-dbus PyQt4-DBUS REQUIRED 4.0 4.10.3 OK - error: libjpeg JPEG-Lib REQUIRED - - MISSING 'libjpeg needs to be installed' libpthread POSIX-Threads-Lib REQUIRED - 2.17 OK - python-dbus Python-DBUS REQUIRED 0.80.0 1.2.0 OK - error: python-devel Python-SDK REQUIRED 2.2 2.7.5 MISSING 'python-devel needs to be installed' pyqt4 Python-Qt4 REQUIRED 4.0 4.10.3 OK - error: cups-devel CUPS-SDK REQUIRED - - MISSING 'cups-devel needs to be installed' error: sane-devel SANE-SDK REQUIRED - - MISSING 'sane-devel needs to be installed' error: libusb USB-Lib REQUIRED - 1.0 MISSING 'libusb needs to be installed' sane Scan-Lib REQUIRED - - OK - error: cups-image CUPS-Image-Lib REQUIRED - - MISSING 'cups-image needs to be installed' error: libnetsnmp-devel SNMP-Networking-SDK REQUIRED 5.0.9 5.7.2 MISSING 'libnetsnmp-devel needs to be installed' python-xml Python-XML-Lib REQUIRED - 2.1.0 OK - python-notify Desktop-notifications OPTIONAL - - OK - ---------------------- | Python Extentions | ---------------------- cupsext CUPS-Extension REQUIRED - 3.13.9 OK - pcardext PhotoCard-Extension REQUIRED - 3.13.9 OK - hpmudext IO-Extension REQUIRED - 3.13.9 OK - ----------------------- | Scan Configuration | ----------------------- hpaio HPLIP-SANE-Backend REQUIRED - 3.13.9 OK 'hpaio found in /etc/sane.d/dll.conf' scanext Scan-SANE-Extension REQUIRED - 3.13.9 OK - ------------------------------ | DISCOVERED SCANNER DEVICES | ------------------------------ device `hpaio:/usb/Officejet_4500_G510a-f?serial=CN04FF20HW05H2' is a Hewlett-Packard Officejet_4500_G510a-f all-in-one -------------------------- | DISCOVERED USB DEVICES | -------------------------- Device URI Model ---------------------------------------------------- --------------------------- hp:/usb/Officejet_4500_G510a-f?serial=CN04FF20HW05H2 HP Officejet 4500 G510a-f --------------------------------- | INSTALLED CUPS PRINTER QUEUES | --------------------------------- Canon-MP230-series ------------------ Type: Unknown Device URI: usb://Canon/MP230%20series?serial=A05B3D&interface=1 PPD: /etc/cups/ppd/Canon-MP230-series.ppd PPD Description: Canon PIXMA MP240 - CUPS+Gutenprint v5.2.9 Printer status: printer Canon-MP230-series is idle. enabled since Sat 25 Jan 2014 03:54:25 PM CET warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices. ML-2010 ------- Type: Unknown Device URI: usb://Samsung/ML-2010?serial=4621BKBQ142179R. PPD: /etc/cups/ppd/ML-2010.ppd PPD Description: Samsung ML-2010, 2.0.0 Printer status: printer ML-2010 is idle. enabled since Fri 24 May 2013 03:35:29 PM CEST warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices. Officejet-4500-G510a-f ---------------------- Type: Printer Device URI: hp:/usb/Officejet_4500_G510a-f?serial=CN182G332V05H2 PPD: /etc/cups/ppd/Officejet-4500-G510a-f.ppd PPD Description: HP Officejet 4500 g510a-f, hpcups 3.13.9 Printer Unplugged or turned offet-4500-G510a-f disabled since Thu 03 Jan 2013 10:27:42 AM CET - error: Unable to communicate with device (code=12): hp:/usb/Officejet_4500_G510a-f?serial=CN182G332V05H2 error: Device not found error: Communication status: Failed Officejet-4500-G510a-f-Fax -------------------------- Type: Fax Device URI: hpfax:/usb/Officejet_4500_G510a-f?serial=CN182G332V05H2 PPD: /etc/cups/ppd/Officejet-4500-G510a-f-Fax.ppd PPD Description: HP Fax hpcups Printer Unplugged or turned offet-4500-G510a-f-Fax disabled since Thu 03 Jan 2013 10:27:42 AM CET - error: Unable to communicate with device (code=12): hpfax:/usb/Officejet_4500_G510a-f?serial=CN182G332V05H2 error: Device not found error: Communication status: Failed Officejet_4500_G510a-f ---------------------- Type: Printer Device URI: hp:/usb/Officejet_4500_G510a-f?serial=CN04FF20HW05H2 PPD: /etc/cups/ppd/Officejet_4500_G510a-f.ppd PPD Description: HP Officejet 4500 g510a-f, hpcups 3.13.9 Printer status: printer Officejet_4500_G510a-f is idle. enabled since Fri 10 Jan 2014 07:34:59 PM CET Communication status: Good Officejet_4500_G510a-f_fax -------------------------- Type: Fax Device URI: hpfax:/usb/Officejet_4500_G510a-f?serial=CN04FF20HW05H2 PPD: /etc/cups/ppd/Officejet_4500_G510a-f_fax.ppd PPD Description: HP Fax hpcups Printer status: printer Officejet_4500_G510a-f_fax is idle. enabled since Fri 18 Oct 2013 11:41:39 AM CEST Communication status: Good Samsung-ML-2010 --------------- Type: Unknown Device URI: usb://Samsung/ML-2010?serial=4621BKBQ142179R. PPD: /etc/cups/ppd/Samsung-ML-2010.ppd PPD Description: Samsung ML-2010, 2.0.0 Printer status: printer Samsung-ML-2010 is idle. enabled since Fri 24 May 2013 03:35:15 PM CEST warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices. -------------- | PERMISSION | -------------- error: groups user-groups Required - - MISSING lp,lpadmin USB Officejet_4500_G510a-f Required - - OK Node:'/dev/bus/usb/001/005' Perm:' root lp rw- rw- ---' ----------- | SUMMARY | ----------- Missing Required Dependencies ----------------------------- error: 'libdbus-1-dev' package is missing/incompatible error: 'libcups2' package is missing/incompatible error: 'openssl' package is missing/incompatible error: 'libjpeg-dev' package is missing/incompatible error: 'python-dev' package is missing/incompatible error: 'libcups2-dev' package is missing/incompatible error: 'cups-bsd' package is missing/incompatible error: 'cups-client' package is missing/incompatible error: 'libsane-dev' package is missing/incompatible error: 'libusb-1.0.0-dev' package is missing/incompatible error: 'libcupsimage2-dev' package is missing/incompatible error: 'libsnmp-dev' package is missing/incompatible Missing Optional Dependencies ----------------------------- None USER GROUPS ----------- error: lp,lpadmin groups need to be added for root user Total Errors: 13 Total Warnings: 4 Run 'hp-doctor' command to prompt and fix the issues. Done.