[ 0.000000] BIOS EBDA/lowmem at: 0009f800/0009f800 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.28-11-generic (buildd@palmer) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #38-Ubuntu SMP Fri Mar 27 09:00:52 UTC 2009 (Ubuntu 2.6.28-11.38-generic) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fee0000 (usable) [ 0.000000] BIOS-e820: 000000007fee0000 - 000000007feec000 (ACPI data) [ 0.000000] BIOS-e820: 000000007feec000 - 000000007ff00000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007ff00000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec10000 - 00000000fec20000 (reserved) [ 0.000000] BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved) [ 0.000000] BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved) [ 0.000000] DMI present. [ 0.000000] last_pfn = 0x7fee0 max_arch_pfn = 0x100000 [ 0.000000] Scanning 2 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 0000000000007000 (usable) [ 0.000000] modified: 0000000000007000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 0000000000092800 (usable) [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000007fee0000 (usable) [ 0.000000] modified: 000000007fee0000 - 000000007feec000 (ACPI data) [ 0.000000] modified: 000000007feec000 - 000000007ff00000 (ACPI NVS) [ 0.000000] modified: 000000007ff00000 - 0000000080000000 (reserved) [ 0.000000] modified: 00000000fec10000 - 00000000fec20000 (reserved) [ 0.000000] modified: 00000000ff800000 - 00000000ffc00000 (reserved) [ 0.000000] modified: 00000000fffffc00 - 0000000100000000 (reserved) [ 0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000 [ 0.000000] RAMDISK: 378c1000 - 37fefd1d [ 0.000000] Allocated new RAMDISK: 00881000 - 00fafd1d [ 0.000000] Move RAMDISK from 00000000378c1000 - 0000000037fefd1c to 00881000 - 00fafd1c [ 0.000000] ACPI: RSDP 000F62C0, 0014 (r0 ACER ) [ 0.000000] ACPI: RSDT 7FEE6205, 0030 (r1 ACER Kestrel 20021012 LTP 0) [ 0.000000] ACPI: FACP 7FEEBF2C, 0074 (r1 ACER Kestrel 20021012 PTL 50) [ 0.000000] ACPI: DSDT 7FEE6235, 5CF7 (r1 ACER Kestrel 20021012 MSFT 100000E) [ 0.000000] ACPI: FACS 7FEFCFC0, 0040 [ 0.000000] ACPI: HPET 7FEEBFA0, 0038 (r1 ACER Kestrel 20021012 PTL 0) [ 0.000000] ACPI: BOOT 7FEEBFD8, 0028 (r1 ACER Kestrel 20021012 LTP 1) [ 0.000000] 1162MB HIGHMEM available. [ 0.000000] 883MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 373fe000 [ 0.000000] low ram: 00000000 - 373fe000 [ 0.000000] bootmap 00012000 - 00018e80 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 000087c52c] TEXT DATA BSS ==> [0000100000 - 000087c52c] [ 0.000000] #4 [000087d000 - 0000881000] INIT_PG_TABLE ==> [000087d000 - 0000881000] [ 0.000000] #5 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] [ 0.000000] #7 [0000881000 - 0000fafd1d] NEW RAMDISK ==> [0000881000 - 0000fafd1d] [ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000373fe [ 0.000000] HighMem 0x000373fe -> 0x0007fee0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[4] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x00000007 [ 0.000000] 0: 0x00000010 -> 0x00000092 [ 0.000000] 0: 0x00000100 -> 0x0007fee0 [ 0.000000] On node 0 totalpages: 523877 [ 0.000000] free_area_init_node: node 0, pgdat c06d0f00, node_mem_map c1000000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3941 pages, LIFO batch:0 [ 0.000000] Normal zone: 1736 pages used for memmap [ 0.000000] Normal zone: 220470 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2326 pages used for memmap [ 0.000000] HighMem zone: 295372 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0x0 is invalid [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 0000000000007000 - 0000000000010000 [ 0.000000] PM: Registered nosave memory: 0000000000092000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000 [ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:7ec10000) [ 0.000000] PERCPU: Allocating 45056 bytes of per cpu data [ 0.000000] NR_CPUS: 64, nr_cpu_ids: 1, nr_node_ids 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519783 [ 0.000000] Kernel command line: root=UUID=ef2291c3-edc1-4ebd-9b02-a4c1d58b9252 ro quiet splash [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] TSC: PIT calibration matches PMTIMER. 1 loops [ 0.000000] Detected 1498.712 MHz processor. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.004000] allocated 10480000 bytes of page_cgroup [ 0.004000] please try cgroup_disable=memory option if you don't want [ 0.004000] Scanning for low memory corruption every 60 seconds [ 0.004000] Memory: 2052148k/2096000k available (4127k kernel code, 42580k reserved, 2208k data, 532k init, 1190792k highmem) [ 0.004000] virtual kernel memory layout: [ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB) [ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB) [ 0.004000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB) [ 0.004000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB) [ 0.004000] .init : 0xc0737000 - 0xc07bc000 ( 532 kB) [ 0.004000] .data : 0xc0507dff - 0xc072fe60 (2208 kB) [ 0.004000] .text : 0xc0100000 - 0xc0507dff (4127 kB) [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.004017] Calibrating delay loop (skipped), value calculated using timer frequency.. 2997.42 BogoMIPS (lpj=5994848) [ 0.004045] Security Framework initialized [ 0.004060] SELinux: Disabled at boot. [ 0.004091] AppArmor: AppArmor initialized [ 0.004103] Mount-cache hash table entries: 512 [ 0.004297] Initializing cgroup subsys ns [ 0.004305] Initializing cgroup subsys cpuacct [ 0.004308] Initializing cgroup subsys memory [ 0.004314] Initializing cgroup subsys freezer [ 0.004335] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004339] CPU: L2 cache: 2048K [ 0.004358] Checking 'hlt' instruction... OK. [ 0.020800] SMP alternatives: switching to UP code [ 0.148511] Freeing SMP alternatives: 18k freed [ 0.148517] ACPI: Core revision 20080926 [ 0.154486] ACPI: Checking initramfs for custom DSDT [ 0.548101] ACPI: setting ELCR to 0200 (from 0440) [ 0.552063] weird, boot CPU (#0) not listedby the BIOS. [ 0.552065] SMP motherboard not detected. [ 0.552069] Local APIC not detected. Using dummy APIC emulation. [ 0.552072] SMP disabled [ 0.552346] Brought up 1 CPUs [ 0.552349] Total of 1 processors activated (2997.42 BogoMIPS). [ 0.552363] CPU0 attaching NULL sched-domain. [ 0.552658] net_namespace: 776 bytes [ 0.552668] Booting paravirtualized kernel on bare hardware [ 0.552914] Time: 12:43:45 Date: 04/03/09 [ 0.552920] regulator: core version 0.5 [ 0.552955] NET: Registered protocol family 16 [ 0.553097] EISA bus registered [ 0.553114] ACPI: bus type pci registered [ 0.554271] PCI: PCI BIOS revision 2.10 entry at 0xfd782, last bus=2 [ 0.554274] PCI: Using configuration type 1 for base access [ 0.557778] ACPI: EC: Look up EC in DSDT [ 0.563249] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 0.564605] ACPI: EC: GPE storm detected, transactions will use polling mode [ 0.594379] ACPI: Interpreter enabled [ 0.594383] ACPI: (supports S0 S3 S4 S5) [ 0.594402] ACPI: Using PIC for interrupt routing [ 0.599769] ACPI: EC: GPE = 0x1d, I/O: command/status = 0x66, data = 0x62 [ 0.599772] ACPI: EC: driver started in interrupt mode [ 0.600448] ACPI: ACPI Dock Station Driver: 1 docks/bays found [ 0.600460] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.600507] pci 0000:00:00.0: reg 10 32bit mmio: [0xe0000000-0xefffffff] [ 0.600659] pci 0000:00:1d.0: reg 20 io port: [0x1800-0x181f] [ 0.600705] pci 0000:00:1d.1: reg 20 io port: [0x1820-0x183f] [ 0.600751] pci 0000:00:1d.2: reg 20 io port: [0x1840-0x185f] [ 0.600804] pci 0000:00:1d.7: reg 10 32bit mmio: [0xd0000000-0xd00003ff] [ 0.600845] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.600850] pci 0000:00:1d.7: PME# disabled [ 0.600923] HPET not enabled in BIOS. You might try hpet=force boot option [ 0.600929] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO [ 0.600934] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH4 GPIO [ 0.600953] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] [ 0.600959] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] [ 0.600966] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] [ 0.600973] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] [ 0.600980] pci 0000:00:1f.1: reg 20 io port: [0x1860-0x186f] [ 0.600987] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff] [ 0.601032] pci 0000:00:1f.3: reg 20 io port: [0x1880-0x189f] [ 0.601069] pci 0000:00:1f.5: reg 10 io port: [0x1c00-0x1cff] [ 0.601076] pci 0000:00:1f.5: reg 14 io port: [0x18c0-0x18ff] [ 0.601083] pci 0000:00:1f.5: reg 18 32bit mmio: [0xd0000c00-0xd0000dff] [ 0.601090] pci 0000:00:1f.5: reg 1c 32bit mmio: [0xd0000800-0xd00008ff] [ 0.601110] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold [ 0.601114] pci 0000:00:1f.5: PME# disabled [ 0.601141] pci 0000:00:1f.6: reg 10 io port: [0x2400-0x24ff] [ 0.601147] pci 0000:00:1f.6: reg 14 io port: [0x2000-0x207f] [ 0.601175] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold [ 0.601179] pci 0000:00:1f.6: PME# disabled [ 0.601212] pci 0000:01:00.0: reg 10 32bit mmio: [0xd8000000-0xdfffffff] [ 0.601218] pci 0000:01:00.0: reg 14 io port: [0x3000-0x30ff] [ 0.601224] pci 0000:01:00.0: reg 18 32bit mmio: [0xd0100000-0xd010ffff] [ 0.601239] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 0.601249] pci 0000:01:00.0: supports D1 D2 [ 0.601280] pci 0000:00:01.0: bridge io port: [0x3000-0x3fff] [ 0.601285] pci 0000:00:01.0: bridge 32bit mmio: [0xd0100000-0xd01fffff] [ 0.601289] pci 0000:00:01.0: bridge 32bit mmio pref: [0xd8000000-0xdfffffff] [ 0.601320] pci 0000:02:02.0: reg 10 32bit mmio: [0xd0204000-0xd0205fff] [ 0.601345] pci 0000:02:02.0: reg 30 32bit mmio: [0x000000-0x003fff] [ 0.601354] pci 0000:02:02.0: supports D1 D2 [ 0.601356] pci 0000:02:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.601361] pci 0000:02:02.0: PME# disabled [ 0.601390] pci 0000:02:04.0: reg 10 32bit mmio: [0xd0208000-0xd0208fff] [ 0.601424] pci 0000:02:04.0: PME# supported from D0 D3hot D3cold [ 0.601428] pci 0000:02:04.0: PME# disabled [ 0.601460] pci 0000:02:06.0: reg 10 32bit mmio: [0xd0209000-0xd0209fff] [ 0.601470] pci 0000:02:06.0: supports D1 D2 [ 0.601472] pci 0000:02:06.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.601477] pci 0000:02:06.0: PME# disabled [ 0.601506] pci 0000:02:06.2: reg 10 32bit mmio: [0xd020a000-0xd020a7ff] [ 0.601514] pci 0000:02:06.2: reg 14 32bit mmio: [0xd0200000-0xd0203fff] [ 0.601544] pci 0000:02:06.2: supports D1 D2 [ 0.601547] pci 0000:02:06.2: PME# supported from D0 D1 D2 D3hot [ 0.601551] pci 0000:02:06.2: PME# disabled [ 0.601579] pci 0000:02:06.3: reg 10 32bit mmio: [0xd0206000-0xd0207fff] [ 0.601612] pci 0000:02:06.3: supports D1 D2 [ 0.601614] pci 0000:02:06.3: PME# supported from D0 D1 D2 D3hot [ 0.601619] pci 0000:02:06.3: PME# disabled [ 0.601653] pci 0000:00:1e.0: transparent bridge [ 0.601657] pci 0000:00:1e.0: bridge io port: [0x4000-0x4fff] [ 0.601662] pci 0000:00:1e.0: bridge 32bit mmio: [0xd0200000-0xd05fffff] [ 0.601689] bus 00 -> node 0 [ 0.601696] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.602007] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 0.602033] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 0.604588] ACPI: PCI Interrupt Link [LNKA] (IRQs *6) [ 0.604724] ACPI: PCI Interrupt Link [LNKB] (IRQs *10) [ 0.604858] ACPI: PCI Interrupt Link [LNKC] (IRQs *6) [ 0.604991] ACPI: PCI Interrupt Link [LNKD] (IRQs *6) [ 0.605127] ACPI: PCI Interrupt Link [LNKE] (IRQs *10) [ 0.605260] ACPI: PCI Interrupt Link [LNKF] (IRQs 10) *0, disabled. [ 0.605395] ACPI: PCI Interrupt Link [LNKG] (IRQs 6) *0, disabled. [ 0.605529] ACPI: PCI Interrupt Link [LNKH] (IRQs *10) [ 0.605648] ACPI: Power Resource [PFN0] (off) [ 0.605696] ACPI: Power Resource [PFN1] (off) [ 0.605777] ACPI: WMI: Mapper loaded [ 0.605958] SCSI subsystem initialized [ 0.606001] libata version 3.00 loaded. [ 0.606053] usbcore: registered new interface driver usbfs [ 0.606072] usbcore: registered new interface driver hub [ 0.606101] usbcore: registered new device driver usb [ 0.606230] PCI: Using ACPI for IRQ routing [ 0.606330] Bluetooth: Core ver 2.13 [ 0.606330] NET: Registered protocol family 31 [ 0.606330] Bluetooth: HCI device and connection manager initialized [ 0.606330] Bluetooth: HCI socket layer initialized [ 0.606330] NET: Registered protocol family 8 [ 0.606330] NET: Registered protocol family 20 [ 0.606330] NetLabel: Initializing [ 0.606330] NetLabel: domain hash size = 128 [ 0.606330] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.606330] NetLabel: unlabeled traffic allowed by default [ 0.606330] AppArmor: AppArmor Filesystem Enabled [ 0.606330] pnp: PnP ACPI init [ 0.606330] ACPI: bus type pnp registered [ 0.610298] pnp: PnP ACPI: found 9 devices [ 0.610301] ACPI: ACPI bus type pnp unregistered [ 0.610305] PnPBIOS: Disabled by ACPI PNP [ 0.610317] system 00:04: ioport range 0x164e-0x164f has been reserved [ 0.610323] system 00:04: ioport range 0x600-0x60f has been reserved [ 0.610326] system 00:04: ioport range 0x700-0x70f has been reserved [ 0.610330] system 00:04: ioport range 0x800-0x80f has been reserved [ 0.610333] system 00:04: ioport range 0x1000-0x107f has been reserved [ 0.610337] system 00:04: ioport range 0x1180-0x11bf has been reserved [ 0.610340] system 00:04: ioport range 0x1c0-0x1cf has been reserved [ 0.610345] system 00:04: ioport range 0xfe00-0xfe00 has been reserved [ 0.610348] system 00:04: ioport range 0x4d0-0x4d1 has been reserved [ 0.610352] system 00:04: ioport range 0x610-0x61f has been reserved [ 0.610357] system 00:04: iomem range 0xfec10000-0xfec1ffff has been reserved [ 0.610360] system 00:04: iomem range 0xff800000-0xffbfffff has been reserved [ 0.610364] system 00:04: iomem range 0xfff00000-0xffffffff could not be reserved [ 0.610368] system 00:04: iomem range 0x0-0x9ffff could not be reserved [ 0.610372] system 00:04: iomem range 0xe0000-0xfffff could not be reserved [ 0.610375] system 00:04: iomem range 0xdf800-0xdffff could not be reserved [ 0.645111] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.645115] pci 0000:00:01.0: IO window: 0x3000-0x3fff [ 0.645119] pci 0000:00:01.0: MEM window: 0xd0100000-0xd01fffff [ 0.645124] pci 0000:00:01.0: PREFETCH window: 0x000000d8000000-0x000000dfffffff [ 0.645132] pci 0000:02:06.0: CardBus bridge, secondary bus 0000:03 [ 0.645135] pci 0000:02:06.0: IO window: 0x004000-0x0040ff [ 0.645140] pci 0000:02:06.0: IO window: 0x004400-0x0044ff [ 0.645144] pci 0000:02:06.0: PREFETCH window: 0x88000000-0x8bffffff [ 0.645149] pci 0000:02:06.0: MEM window: 0x90000000-0x93ffffff [ 0.645154] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02 [ 0.645158] pci 0000:00:1e.0: IO window: 0x4000-0x4fff [ 0.645164] pci 0000:00:1e.0: MEM window: 0xd0200000-0xd05fffff [ 0.645169] pci 0000:00:1e.0: PREFETCH window: 0x00000088000000-0x0000008dffffff [ 0.645184] pci 0000:00:1e.0: setting latency timer to 64 [ 0.645192] pci 0000:02:06.0: enabling device (0104 -> 0107) [ 0.645400] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10 [ 0.645403] PCI: setting IRQ 10 as level-triggered [ 0.645408] pci 0000:02:06.0: PCI INT A -> Link[LNKE] -> GSI 10 (level, low) -> IRQ 10 [ 0.645414] bus: 00 index 0 io port: [0x00-0xffff] [ 0.645417] bus: 00 index 1 mmio: [0x000000-0xffffffff] [ 0.645420] bus: 01 index 0 io port: [0x3000-0x3fff] [ 0.645423] bus: 01 index 1 mmio: [0xd0100000-0xd01fffff] [ 0.645426] bus: 01 index 2 mmio: [0xd8000000-0xdfffffff] [ 0.645429] bus: 01 index 3 mmio: [0x0-0x0] [ 0.645431] bus: 02 index 0 io port: [0x4000-0x4fff] [ 0.645434] bus: 02 index 1 mmio: [0xd0200000-0xd05fffff] [ 0.645437] bus: 02 index 2 mmio: [0x88000000-0x8dffffff] [ 0.645440] bus: 02 index 3 io port: [0x00-0xffff] [ 0.645442] bus: 02 index 4 mmio: [0x000000-0xffffffff] [ 0.645445] bus: 03 index 0 io port: [0x4000-0x40ff] [ 0.645448] bus: 03 index 1 io port: [0x4400-0x44ff] [ 0.645451] bus: 03 index 2 mmio: [0x88000000-0x8bffffff] [ 0.645454] bus: 03 index 3 mmio: [0x90000000-0x93ffffff] [ 0.645463] NET: Registered protocol family 2 [ 0.645584] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.645876] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.646662] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.647161] TCP: Hash tables configured (established 131072 bind 65536) [ 0.647164] TCP reno registered [ 0.647311] NET: Registered protocol family 1 [ 0.647464] checking if image is initramfs... it is [ 1.148061] Switched to high resolution mode on CPU 0 [ 1.452946] Freeing initrd memory: 7355k freed [ 1.453006] Simple Boot Flag at 0x37 set to 0x1 [ 1.453041] cpufreq: No nForce2 chipset. [ 1.453219] audit: initializing netlink socket (disabled) [ 1.453246] type=2000 audit(1238762626.452:1): initialized [ 1.478056] highmem bounce pool size: 64 pages [ 1.478063] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 1.479663] VFS: Disk quotas dquot_6.5.1 [ 1.479730] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.480478] fuse init (API version 7.10) [ 1.480579] msgmni has been set to 1698 [ 1.480797] alg: No test for stdrng (krng) [ 1.480811] io scheduler noop registered [ 1.480813] io scheduler anticipatory registered [ 1.480816] io scheduler deadline registered [ 1.480834] io scheduler cfq registered (default) [ 1.480927] pci 0000:01:00.0: Boot video device [ 1.484898] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.484910] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.485062] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.485065] ACPI: Power Button (FF) [PWRF] [ 1.485131] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 [ 1.487878] ACPI: Lid Switch [LID] [ 1.487932] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 [ 1.487935] ACPI: Sleep Button (CM) [SLPB] [ 1.488145] fan PNP0C0B:00: registered as cooling_device0 [ 1.488152] ACPI: Fan [FAN0] (off) [ 1.488300] fan PNP0C0B:01: registered as cooling_device1 [ 1.488306] ACPI: Fan [FAN1] (off) [ 1.488460] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 1.488486] processor ACPI_CPU:00: registered as cooling_device2 [ 1.488490] ACPI: Processor [CPU0] (supports 8 throttling states) [ 1.493929] thermal LNXTHERM:01: registered as thermal_zone0 [ 1.501085] ACPI: Thermal Zone [THRM] (58 C) [ 1.501114] ACPI: SBS HC: EC = 0xf6c0ce40, offset = 0x18, query_bit = 0x20 [ 1.515145] ACPI: Smart Battery System [SBS0]: AC Adapter [AC0] (on-line) [ 1.861280] ACPI: Smart Battery System [SBS0]: Battery Slot [BAT0] (battery present) [ 1.893148] ACPI: Smart Battery System [SBS0]: Battery Slot [BAT1] (battery absent) [ 1.893168] isapnp: Scanning for PnP cards... [ 2.247220] isapnp: No Plug & Play device found [ 2.356591] Serial: 8250/16550 driver4 ports, IRQ sharing enabled [ 2.356702] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A [ 2.357250] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 [ 2.357255] serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10 [ 2.357263] serial 0000:00:1f.6: PCI INT B disabled [ 2.358045] brd: module loaded [ 2.358394] loop: module loaded [ 2.358488] Fixed MDIO Bus: probed [ 2.358496] PPP generic driver version 2.4.2 [ 2.358562] input: Macintosh mouse button emulation as /devices/virtual/input/input3 [ 2.358593] Driver 'sd' needs updating - please use bus_type methods [ 2.358604] Driver 'sr' needs updating - please use bus_type methods [ 2.358691] ata_piix 0000:00:1f.1: version 2.12 [ 2.358702] ata_piix 0000:00:1f.1: power state changed by ACPI to D0 [ 2.358707] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007) [ 2.358913] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 6 [ 2.358916] PCI: setting IRQ 6 as level-triggered [ 2.358921] ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 6 (level, low) -> IRQ 6 [ 2.358963] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 2.359050] scsi0 : ata_piix [ 2.359138] scsi1 : ata_piix [ 2.360405] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1860 irq 14 [ 2.360409] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1868 irq 15 [ 2.540528] ata1.00: ATA-6: FUJITSU MHT2060AT, 0022, max UDMA/100 [ 2.540532] ata1.00: 117210240 sectors, multi 16: LBA [ 2.572491] ata1.00: configured for UDMA/100 [ 2.736339] ata2.00: ATAPI: HL-DT-ST DVD+RW GCA-4040N, 1.02, max UDMA/33 [ 2.752296] ata2.00: configured for UDMA/33 [ 2.753309] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHT2060A 0022 PQ: 0 ANSI: 5 [ 2.753423] sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors: (60.0 GB/55.8 GiB) [ 2.753443] sd 0:0:0:0: [sda] Write Protect is off [ 2.753446] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.753476] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.753542] sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors: (60.0 GB/55.8 GiB) [ 2.753559] sd 0:0:0:0: [sda] Write Protect is off [ 2.753562] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.753590] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.753595] sda: sda1 < sda5 > sda2 sda3 sda4 [ 2.975338] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.975385] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.975948] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD+RW GCA-4040N 1.02 PQ: 0 ANSI: 5 [ 2.979055] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 2.979059] Uniform CD-ROM driver Revision: 3.20 [ 2.979155] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.979197] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 2.979904] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.980146] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10 [ 2.980151] ehci_hcd 0000:00:1d.7: PCI INT D -> Link[LNKH] -> GSI 10 (level, low) -> IRQ 10 [ 2.980174] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 2.980179] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 2.980258] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 2.984165] ehci_hcd 0000:00:1d.7: debug port 1 [ 2.984171] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 2.984180] ehci_hcd 0000:00:1d.7: irq 10, io mem 0xd0000000 [ 3.000026] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 3.000118] usb usb1: configuration #1 chosen from 1 choice [ 3.000163] hub 1-0:1.0: USB hub found [ 3.000175] hub 1-0:1.0: 6 ports detected [ 3.000293] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.000312] uhci_hcd: USB Universal Host Controller Interface driver [ 3.000535] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 6 [ 3.000539] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 6 (level, low) -> IRQ 6 [ 3.000546] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 3.000550] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 3.000601] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 3.000622] uhci_hcd 0000:00:1d.0: irq 6, io base 0x00001800 [ 3.000712] usb usb2: configuration #1 chosen from 1 choice [ 3.000741] hub 2-0:1.0: USB hub found [ 3.000748] hub 2-0:1.0: 2 ports detected [ 3.001032] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 6 [ 3.001037] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 6 (level, low) -> IRQ 6 [ 3.001043] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 3.001047] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 3.001094] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 3.001114] uhci_hcd 0000:00:1d.1: irq 6, io base 0x00001820 [ 3.001199] usb usb3: configuration #1 chosen from 1 choice [ 3.001232] hub 3-0:1.0: USB hub found [ 3.001239] hub 3-0:1.0: 2 ports detected [ 3.001323] uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 6 (level, low) -> IRQ 6 [ 3.001329] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 3.001333] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 3.001377] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 3.001397] uhci_hcd 0000:00:1d.2: irq 6, io base 0x00001840 [ 3.001480] usb usb4: configuration #1 chosen from 1 choice [ 3.001509] hub 4-0:1.0: USB hub found [ 3.001517] hub 4-0:1.0: 2 ports detected [ 3.001648] usbcore: registered new interface driver libusual [ 3.001686] usbcore: registered new interface driver usbserial [ 3.001698] USB Serial support registered for generic [ 3.001715] usbcore: registered new interface driver usbserial_generic [ 3.001717] usbserial: USB Serial Driver core [ 3.001770] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOU2] at 0x60,0x64 irq 1,12 [ 3.004482] i8042.c: Detected active multiplexing controller, rev 1.1. [ 3.005442] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.005447] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 3.005450] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 3.005453] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 3.005456] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 3.005632] mice: PS/2 mouse device common for all mice [ 3.005849] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 3.005865] rtc0: alarms up to one month, y3k, 242 bytes nvram [ 3.005936] device-mapper: uevent: version 1.0.3 [ 3.006051] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com [ 3.006101] device-mapper: multipath: version 1.0.5 loaded [ 3.006104] device-mapper: multipath round-robin: version 1.0.0 loaded [ 3.006187] EISA: Probing bus 0 at eisa.0 [ 3.006194] Cannot allocate resource for EISA slot 1 [ 3.006197] Cannot allocate resource for EISA slot 2 [ 3.006200] Cannot allocate resource for EISA slot 3 [ 3.006203] Cannot allocate resource for EISA slot 4 [ 3.006221] EISA: Detected 0 cards. [ 3.006291] cpuidle: using governor ladder [ 3.006363] cpuidle: using governor menu [ 3.006938] TCP cubic registered [ 3.007059] NET: Registered protocol family 10 [ 3.007515] lo: Disabled Privacy Extensions [ 3.007879] NET: Registered protocol family 17 [ 3.007899] Bluetooth: L2CAP ver 2.11 [ 3.007901] Bluetooth: L2CAP socket layer initialized [ 3.007904] Bluetooth: SCO (Voice Link) ver 0.6 [ 3.007906] Bluetooth: SCO socket layer initialized [ 3.007932] Bluetooth: RFCOMM socket layer initialized [ 3.007939] Bluetooth: RFCOMM TTY layer initialized [ 3.007941] Bluetooth: RFCOMM ver 1.10 [ 3.008127] Marking TSC unstable due to cpufreq changes [ 3.008385] IO APIC resources could be not be allocated. [ 3.008423] Using IPI No-Shortcut mode [ 3.008497] registered taskstats version 1 [ 3.008612] Magic number: 5:168:733 [ 3.008633] hwmon hwmon0: hash matches [ 3.008676] rtc_cmos 00:01: setting system clock to 2009-04-03 12:43:48 UTC (1238762628) [ 3.008679] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 3.008681] EDD information not available. [ 3.008977] Freeing unused kernel memory: 532k freed [ 3.009094] Write protecting the kernel text: 4128k [ 3.009136] Write protecting the kernel read-only data: 1532k [ 3.052600] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 3.104509] hub 2-0:1.0: over-current change on port 1 [ 3.208030] hub 2-0:1.0: over-current change on port 2 [ 3.560714] b44 0000:02:02.0: PCI INT A -> Link[LNKD] -> GSI 6 (level, low) -> IRQ 6 [ 3.628091] ssb: Sonics Silicon Backplane found on PCI device 0000:02:02.0 [ 3.628118] b44.c:v2.0 [ 3.628147] ohci1394 0000:02:06.2: PCI INT A -> Link[LNKE] -> GSI 10 (level, low) -> IRQ 10 [ 3.684884] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10] MMIO=[d020a000-d020a7ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 3.689398] usb 3-1: new full speed USB device using uhci_hcd and address 2 [ 3.700680] eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:c0:9f:4e:4c:cb [ 3.907800] usb 3-1: configuration #1 chosen from 1 choice [ 3.910442] hub 1-0:1.0: over-current change on port 1 [ 4.012038] hub 1-0:1.0: over-current change on port 2 [ 4.414073] PM: Starting manual resume from disk [ 4.414077] PM: Resume from partition 8:2 [ 4.414079] PM: Checking hibernation image. [ 4.414367] PM: Resume from disk failed. [ 4.447899] kjournald starting. Commit interval 5 seconds [ 4.447909] EXT3-fs: mounted filesystem with ordered data mode. [ 4.968143] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00c09f000022e320] [ 11.218924] udev: starting version 140 [ 11.512794] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 11.568611] Bluetooth: Generic Bluetooth USB driver ver 0.3 [ 11.568716] usbcore: registered new interface driver btusb [ 11.941238] irda_init() [ 11.941251] NET: Registered protocol family 23 [ 12.368602] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume [ 12.477406] Linux agpgart interface v0.103 [ 12.493694] intel_rng: FWH not detected [ 12.586863] ieee80211_crypt: registered algorithm 'NULL' [ 12.603341] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 12.603344] ieee80211: Copyright (C) 2004-2005 Intel Corporation [ 12.665723] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 12.694903] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:02/device:03/input/input6 [ 12.698968] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 12.708277] agpgart-intel 0000:00:00.0: Intel 855GM Chipset [ 12.730466] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 [ 12.742871] acer-wmi: Acer Laptop ACPI-WMI Extras [ 12.742886] acer-wmi: No or unsupported WMI interface, unable to load [ 12.749821] yenta_cardbus 0000:02:06.0: CardBus bridge found [1025:0064] [ 12.749834] yenta_cardbus 0000:02:06.0: Enabling burst memory read transactions [ 12.749838] yenta_cardbus 0000:02:06.0: Using CSCINT to route CSC interrupts to PCI [ 12.749841] yenta_cardbus 0000:02:06.0: Routing CardBus interrupts to PCI [ 12.749846] yenta_cardbus 0000:02:06.0: TI: mfunc 0x01a21b22, devctl 0x64 [ 12.777521] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq [ 12.777524] ipw2200: Copyright(c) 2003-2006 Intel Corporation [ 12.809925] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 1. [ 12.809949] nsc-ircc, chip->init [ 12.809957] nsc-ircc, Found chip at base=0x164e [ 12.809978] nsc-ircc, driver loaded (Dag Brattli) [ 12.810006] nsc_ircc_open(), can't get iobase of 0x2f8 [ 12.810030] nsc-ircc, Found chip at base=0x164e [ 12.810051] nsc-ircc, driver loaded (Dag Brattli) [ 12.810054] nsc_ircc_open(), can't get iobase of 0x2f8 [ 12.810244] nsc-ircc 00:08: disabled [ 12.829870] iTCO_vendor_support: vendor-support=0 [ 12.832473] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 [ 12.832587] iTCO_wdt: Found a ICH4-M TCO device (Version=1, TCOBASE=0x1060) [ 12.832666] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 12.981397] yenta_cardbus 0000:02:06.0: ISA IRQ mask 0x08b8, PCI irq 10 [ 12.981402] yenta_cardbus 0000:02:06.0: Socket status: 30000006 [ 12.981407] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #02 to #06 [ 12.981415] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff [ 12.981419] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x4000-0x4fff: clean. [ 12.981663] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xd05fffff [ 12.981667] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x8dffffff [ 12.986917] ipw2200 0000:02:04.0: PCI INT A -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10 [ 12.988151] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection [ 12.988192] ipw2200 0000:02:04.0: firmware: requesting ipw2200-bss.fw [ 13.222927] ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels) [ 13.222961] tifm_7xx1 0000:02:06.3: PCI INT A -> Link[LNKE] -> GSI 10 (level, low) -> IRQ 10 [ 13.250205] Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10 [ 13.250246] Intel ICH 0000:00:1f.5: setting latency timer to 64 [ 13.332643] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean. [ 13.334027] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean. [ 13.334633] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. [ 13.335139] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. [ 13.336272] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. [ 13.397890] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x126eb1, caps: 0xa04713/0x4000 [ 13.440924] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input7 [ 13.568029] intel8x0_measure_ac97_clock: measured 53961 usecs [ 13.568033] intel8x0: clocking to 48000 [ 13.870623] lp: driver loaded but no devices found [ 13.940994] Adding 4393768k swap on /dev/sda2. Priority:-1 extents:1 across:4393768k [ 14.585639] EXT3 FS on sda5, internal journal [ 15.697696] type=1505 audit(1238762641.187:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=1847 [ 15.762141] type=1505 audit(1238762641.251:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=1851 [ 15.762262] type=1505 audit(1238762641.251:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=1851 [ 15.762314] type=1505 audit(1238762641.251:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=1851 [ 15.762357] type=1505 audit(1238762641.251:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=1851 [ 15.950897] type=1505 audit(1238762641.439:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=1856 [ 15.951156] type=1505 audit(1238762641.439:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=1856 [ 16.012047] type=1505 audit(1238762641.503:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=1860 [ 21.338900] ttyS1: LSR safety check engaged! [ 21.651473] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 21.651477] Bluetooth: BNEP filters: protocol multicast [ 21.676485] Bridge firewalling registered [ 23.342992] pci 0000:01:00.0: power state changed by ACPI to D0 [ 23.343003] pci 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 6 (level, low) -> IRQ 6 [ 23.689484] [drm] Initialized drm 1.1.0 20060810 [ 23.720881] [drm] Initialized radeon 1.29.0 20080528 on minor 0 [ 23.936437] ppdev: user-space parallel port driver [ 24.010457] agpgart-intel 0000:00:00.0: AGP 2.0 bridge [ 24.010475] agpgart-intel 0000:00:00.0: putting AGP V2 device into 1x mode [ 24.010507] pci 0000:01:00.0: putting AGP V2 device into 1x mode [ 24.313385] [drm] Setting GART location based on new memory map [ 24.313393] [drm] Loading R300 Microcode [ 24.313435] [drm] Num pipes: 1 [ 24.313440] [drm] writeback test succeeded in 1 usecs [ 27.512929] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 37.916026] eth1: no IPv6 routers present [ 54.244653] ieee80211_crypt: registered algorithm 'TKIP' [ 85.644041] Clocksource tsc unstable (delta = -107945117 ns) [ 124.688354] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 124.689147] input: Logitech MX900 Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/bluetooth/hci0/hci0:42/input8 [ 124.716115] generic-bluetooth 0005:046D:B001.0001: input,hidraw0: BLUETOOTH HID v22.01 Mouse [Logitech MX900 Mouse] on 00:1B:DC:0F:A9:CD [ 199.278402] b44: eth0: powering down PHY [ 200.350208] [drm] Num pipes: 1 [ 200.908221] PM: Syncing filesystems ... done. [ 200.914751] PM: Preparing system for mem sleep [ 200.914756] Freezing user space processes ... (elapsed 0.00 seconds) done. [ 200.916066] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [ 200.916112] PM: Entering mem sleep [ 200.916126] Suspending console(s) (use no_console_suspend to debug) [ 200.917627] btusb_intr_complete: hci0 urb f62b3400 failed to resubmit (1) [ 200.918618] btusb_bulk_complete: hci0 urb f3dda280 failed to resubmit (2) [ 200.918622] btusb_bulk_complete: hci0 urb f3ddaa00 failed to resubmit (1) [ 201.788646] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 201.788981] sd 0:0:0:0: [sda] Stopping disk [ 202.862269] ACPI handle has no context! [ 202.862276] tifm_7xx1 0000:02:06.3: PCI INT A disabled [ 202.862280] ACPI handle has no context! [ 202.892081] eth1: Going into suspend... [ 202.893002] ipw2200 0000:02:04.0: PCI INT A disabled [ 202.908063] b44 0000:02:02.0: PCI INT A disabled [ 202.924447] Intel ICH 0000:00:1f.5: PCI INT B disabled [ 202.924666] ata_piix 0000:00:1f.1: PCI INT A disabled [ 202.924719] ata_piix 0000:00:1f.1: power state changed by ACPI to D3 [ 202.924792] ehci_hcd 0000:00:1d.7: PCI INT D disabled [ 202.940059] uhci_hcd 0000:00:1d.2: PCI INT C disabled [ 202.940081] uhci_hcd 0000:00:1d.1: PCI INT B disabled [ 202.940103] uhci_hcd 0000:00:1d.0: PCI INT A disabled [ 202.981574] PM: suspend devices took 2.064 seconds [ 202.981949] ACPI: Preparing to enter system sleep state S3 [ 203.740099] Disabling non-boot CPUs ... [ 203.740174] cpufreq: suspend failed to assert current frequency is what timing core thinks it is. [ 203.740174] Back to C! [ 203.740174] cpufreq: resume failed to assert current frequency is what timing core thinks it is. [ 203.741562] ACPI: Waking up from system sleep state S3 [ 204.052303] agpgart-intel 0000:00:00.0: restoring config space at offset 0x1 (was 0x20900106, writing 0x30900106) [ 204.052323] pm_op(): pci_pm_resume+0x0/0x70 returns -16 [ 204.052326] PM: Device 0000:00:00.0 failed to resume: error -16 [ 204.052352] pci 0000:00:01.0: restoring config space at offset 0x7 (was 0x2a03030, writing 0x22a03030) [ 204.052368] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 6 (level, low) -> IRQ 6 [ 204.052372] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 204.052405] usb usb2: root hub lost power or was reset [ 204.052423] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 6 (level, low) -> IRQ 6 [ 204.052427] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 204.052458] usb usb3: root hub lost power or was reset [ 204.052484] uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 6 (level, low) -> IRQ 6 [ 204.052488] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 204.052519] usb usb4: root hub lost power or was reset [ 204.068042] ehci_hcd 0000:00:1d.7: PCI INT D -> Link[LNKH] -> GSI 10 (level, low) -> IRQ 10 [ 204.068046] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 204.068072] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900106) [ 204.068093] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0xfff0, writing 0x8df08800) [ 204.068099] pci 0000:00:1e.0: restoring config space at offset 0x6 (was 0x40020200, writing 0x40060200) [ 204.068108] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x80800105, writing 0x88800107) [ 204.068116] pci 0000:00:1e.0: setting latency timer to 64 [ 204.068362] ata_piix 0000:00:1f.1: power state changed by ACPI to D0 [ 204.068367] ata_piix 0000:00:1f.1: restoring config space at offset 0xf (was 0x100, writing 0x1ff) [ 204.068376] ata_piix 0000:00:1f.1: restoring config space at offset 0x9 (was 0x0, writing 0x8e000000) [ 204.068387] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800007) [ 204.068397] ata_piix 0000:00:1f.1: power state changed by ACPI to D0 [ 204.068401] ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 6 (level, low) -> IRQ 6 [ 204.068406] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 204.072983] Intel ICH 0000:00:1f.5: restoring config space at offset 0xf (was 0x200, writing 0x20a) [ 204.072993] Intel ICH 0000:00:1f.5: restoring config space at offset 0x7 (was 0x0, writing 0xd0000800) [ 204.072998] Intel ICH 0000:00:1f.5: restoring config space at offset 0x6 (was 0x0, writing 0xd0000c00) [ 204.073002] Intel ICH 0000:00:1f.5: restoring config space at offset 0x5 (was 0x1301, writing 0x18c1) [ 204.073007] Intel ICH 0000:00:1f.5: restoring config space at offset 0x4 (was 0x1201, writing 0x1c01) [ 204.073013] Intel ICH 0000:00:1f.5: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900003) [ 204.073023] Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10 [ 204.073028] Intel ICH 0000:00:1f.5: setting latency timer to 64 [ 204.081347] pci 0000:00:1f.6: restoring config space at offset 0xf (was 0x200, writing 0x20a) [ 204.081361] pci 0000:00:1f.6: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 204.081392] pci 0000:01:00.0: power state changed by ACPI to D0 [ 204.081397] pci 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 6 (level, low) -> IRQ 6 [ 204.096040] b44 0000:02:02.0: enabling device (0000 -> 0002) [ 204.096044] b44 0000:02:02.0: PCI INT A -> Link[LNKD] -> GSI 6 (level, low) -> IRQ 6 [ 204.096051] b44 0000:02:02.0: restoring config space at offset 0xf (was 0x100, writing 0x106) [ 204.096063] b44 0000:02:02.0: restoring config space at offset 0x4 (was 0x0, writing 0xd0204000) [ 204.096067] b44 0000:02:02.0: restoring config space at offset 0x3 (was 0x0, writing 0x4000) [ 204.096072] b44 0000:02:02.0: restoring config space at offset 0x1 (was 0x100002, writing 0x8100106) [ 204.116038] eth1: Coming out of suspend... [ 204.132026] ipw2200 0000:02:04.0: enabling device (0000 -> 0002) [ 204.132030] ipw2200 0000:02:04.0: PCI INT A -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10 [ 204.132038] ipw2200 0000:02:04.0: restoring config space at offset 0xf (was 0x18030100, writing 0x1803010a) [ 204.132051] ipw2200 0000:02:04.0: restoring config space at offset 0x4 (was 0x0, writing 0xd0208000) [ 204.132055] ipw2200 0000:02:04.0: restoring config space at offset 0x3 (was 0x0, writing 0x4008) [ 204.132061] ipw2200 0000:02:04.0: restoring config space at offset 0x1 (was 0x2900002, writing 0x2900116) [ 204.261656] yenta_cardbus 0000:02:06.0: restoring config space at offset 0xf (was 0x34001ff, writing 0x5c0010a) [ 204.261660] yenta_cardbus 0000:02:06.0: restoring config space at offset 0xe (was 0x0, writing 0x44fc) [ 204.261665] yenta_cardbus 0000:02:06.0: restoring config space at offset 0xd (was 0x0, writing 0x4400) [ 204.261670] yenta_cardbus 0000:02:06.0: restoring config space at offset 0xc (was 0x0, writing 0x40fc) [ 204.261674] yenta_cardbus 0000:02:06.0: restoring config space at offset 0xb (was 0x0, writing 0x4000) [ 204.261679] yenta_cardbus 0000:02:06.0: restoring config space at offset 0xa (was 0x0, writing 0x93fff000) [ 204.261683] yenta_cardbus 0000:02:06.0: restoring config space at offset 0x9 (was 0x0, writing 0x90000000) [ 204.261688] yenta_cardbus 0000:02:06.0: restoring config space at offset 0x8 (was 0x0, writing 0x8bfff000) [ 204.261692] yenta_cardbus 0000:02:06.0: restoring config space at offset 0x7 (was 0x0, writing 0x88000000) [ 204.261697] yenta_cardbus 0000:02:06.0: restoring config space at offset 0x6 (was 0x0, writing 0xb0060302) [ 204.261703] yenta_cardbus 0000:02:06.0: restoring config space at offset 0x4 (was 0x0, writing 0xd0209000) [ 204.261707] yenta_cardbus 0000:02:06.0: restoring config space at offset 0x3 (was 0x820000, writing 0x82a820) [ 204.261713] yenta_cardbus 0000:02:06.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100007) [ 204.268554] ata2.00: ACPI cmd 03/42:00:00:00:a0:ef rejected by device (Stat=0x51 Err=0x04) [ 204.268757] ata2.00: ACPI cmd 00/0c:00:00:00:a0:ef rejected by device (Stat=0x51 Err=0x04) [ 204.284726] ata2.00: configured for UDMA/33 [ 204.416041] ohci1394 0000:02:06.2: restoring config space at offset 0xf (was 0x4030100, writing 0x403010a) [ 204.416053] ohci1394 0000:02:06.2: restoring config space at offset 0x5 (was 0x0, writing 0xd0200000) [ 204.416058] ohci1394 0000:02:06.2: restoring config space at offset 0x4 (was 0x0, writing 0xd020a000) [ 204.416063] ohci1394 0000:02:06.2: restoring config space at offset 0x3 (was 0x800000, writing 0x804008) [ 204.416068] ohci1394 0000:02:06.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100116) [ 204.472697] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10] MMIO=[d020a000-d020a7ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 204.488042] tifm_7xx1 0000:02:06.3: restoring config space at offset 0xf (was 0x40701ff, writing 0x407010a) [ 204.488055] tifm_7xx1 0000:02:06.3: restoring config space at offset 0x4 (was 0x0, writing 0xd0206000) [ 204.488059] tifm_7xx1 0000:02:06.3: restoring config space at offset 0x3 (was 0x800000, writing 0x804008) [ 204.488065] tifm_7xx1 0000:02:06.3: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106) [ 204.488076] tifm_7xx1 0000:02:06.3: PCI INT A -> Link[LNKE] -> GSI 10 (level, low) -> IRQ 10 [ 204.488159] sd 0:0:0:0: [sda] Starting disk [ 205.143650] ata1.00: ACPI cmd 03/45:00:00:00:a0:ef rejected by device (Stat=0x51 Err=0x04) [ 205.147046] ata1.00: ACPI cmd 00/0c:00:00:00:a0:ef rejected by device (Stat=0x51 Err=0x04) [ 205.160497] ata1.00: configured for UDMA/100 [ 205.174721] sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors: (60.0 GB/55.8 GiB) [ 205.174741] sd 0:0:0:0: [sda] Write Protect is off [ 205.174743] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 205.174770] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 205.680039] usb 3-1: reset full speed USB device using uhci_hcd and address 2 [ 205.878271] PM: resume devices took 2.108 seconds [ 205.878564] PM: Finishing wakeup. [ 205.878565] Restarting tasks ... <6>synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume [ 205.932507] done. [ 206.064031] hub 2-0:1.0: over-current change on port 1 [ 206.168026] hub 2-0:1.0: over-current change on port 2 [ 207.191054] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume [ 218.191363] agpgart-intel 0000:00:00.0: AGP 2.0 bridge [ 218.191382] agpgart-intel 0000:00:00.0: putting AGP V2 device into 1x mode [ 218.191413] pci 0000:01:00.0: putting AGP V2 device into 1x mode [ 218.191441] [drm] Loading R300 Microcode [ 218.191483] [drm] Num pipes: 1 [ 225.619256] input: Logitech MX900 Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/bluetooth/hci0/hci0:42/input9 [ 225.644102] generic-bluetooth 0005:046D:B001.0002: input,hidraw1: BLUETOOTH HID v22.01 Mouse [Logitech MX900 Mouse] on 00:1B:DC:0F:A9:CD [ 234.885913] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 234.889100] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 235.101458] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 239.816153] Corrupted low memory at c0007bb4 (7bb4 phys) = 5aa70286 [ 239.816158] Corrupted low memory at c0007bb8 (7bb8 phys) = 02860015 [ 239.816161] Corrupted low memory at c0007bbc (7bbc phys) = 00005aa7 [ 239.816164] Corrupted low memory at c0007bc4 (7bc4 phys) = 02465a8b [ 239.816166] Corrupted low memory at c0007bc8 (7bc8 phys) = 00008e8c [ 239.816169] Corrupted low memory at c0007bcc (7bcc phys) = 16800378 [ 239.816171] Corrupted low memory at c0007bd0 (7bd0 phys) = 1528a00e [ 239.816174] Corrupted low memory at c0007bd4 (7bd4 phys) = 00003961 [ 239.816177] Corrupted low memory at c0007bd8 (7bd8 phys) = 780325b8 [ 239.816179] Corrupted low memory at c0007bdc (7bdc phys) = 2c1e4ca3 [ 239.816182] Corrupted low memory at c0007be0 (7be0 phys) = 00007bf4 [ 239.816184] Corrupted low memory at c0007be4 (7be4 phys) = e04e1680 [ 239.816187] Corrupted low memory at c0007be8 (7be8 phys) = 00000378 [ 239.816190] Corrupted low memory at c0007bec (7bec phys) = 60001600 [ 239.816192] Corrupted low memory at c0007bf0 (7bf0 phys) = 0000020e [ 239.816195] Corrupted low memory at c0007bf8 (7bf8 phys) = 12821501 [ 239.816197] Corrupted low memory at c0007bfc (7bfc phys) = 0002f000 [ 239.816225] ------------[ cut here ]------------ [ 239.816228] WARNING: at /build/buildd/linux-2.6.28/arch/x86/kernel/setup.c:719 check_for_bios_corruption+0xc8/0xd0() [ 239.816231] Memory corruption detected in low memory [ 239.816233] Modules linked in: hidp michael_mic arc4 ecb ieee80211_crypt_tkip binfmt_misc ppdev radeon drm bridge stp bnep input_polldev lp parport joydev snd_intel8x0 snd_ac97_codec pcmcia ac97_bus snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_dummy snd_seq_oss snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device iTCO_wdt iTCO_vendor_support tifm_7xx1 ipw2200 yenta_socket rsrc_nonstatic intel_agp video tifm_core pcspkr ieee80211 ieee80211_crypt snd soundcore snd_page_alloc pcmcia_core led_class agpgart output psmouse irda crc_ccitt btusb shpchp serio_raw ohci1394 ieee1394 b44 ssb mii fbcon tileblit font bitblit softcursor [ 239.816288] Pid: 0, comm: swapper Not tainted 2.6.28-11-generic #38-Ubuntu [ 239.816291] Call Trace: [ 239.816296] [] warn_slowpath+0x60/0x80 [ 239.816301] [] ? release_console_sem+0x1c9/0x200 [ 239.816306] [] ? _spin_lock+0x8/0x10 [ 239.816311] [] ? default_spin_lock_flags+0x8/0x10 [ 239.816314] [] ? _spin_lock_irqsave+0x2e/0x40 [ 239.816317] [] ? printk+0x18/0x1a [ 239.816321] [] check_for_bios_corruption+0xc8/0xd0 [ 239.816325] [] periodic_check_for_corruption+0x8/0x30 [ 239.816329] [] run_timer_softirq+0x130/0x200 [ 239.816333] [] ? periodic_check_for_corruption+0x0/0x30 [ 239.816337] [] ? periodic_check_for_corruption+0x0/0x30 [ 239.816341] [] __do_softirq+0x97/0x170 [ 239.816344] [] do_softirq+0x5d/0x60 [ 239.816348] [] irq_exit+0x55/0x90 [ 239.816351] [] do_IRQ+0x83/0xa0 [ 239.816354] [] common_interrupt+0x23/0x30 [ 239.816359] [] ? acpi_idle_enter_simple+0x153/0x18e [ 239.816362] [] acpi_idle_enter_bm+0xc8/0x2b8 [ 239.816368] [] cpuidle_idle_call+0x6f/0xd0 [ 239.816371] [] cpu_idle+0x6d/0xd0 [ 239.816375] [] rest_init+0x4e/0x60 [ 239.816378] ---[ end trace 0e82fdec2e148b6c ]--- [ 245.592030] eth1: no IPv6 routers present