[ 0.000000] BIOS EBDA/lowmem at: 0009f800/0009f800 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.28-11-generic (buildd@palmer) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #38-Ubuntu SMP Fri Mar 27 09:00:52 UTC 2009 (Ubuntu 2.6.28-11.38-generic) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fee0000 (usable) [ 0.000000] BIOS-e820: 000000007fee0000 - 000000007feec000 (ACPI data) [ 0.000000] BIOS-e820: 000000007feec000 - 000000007ff00000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007ff00000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec10000 - 00000000fec20000 (reserved) [ 0.000000] BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved) [ 0.000000] BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved) [ 0.000000] DMI present. [ 0.000000] last_pfn = 0x7fee0 max_arch_pfn = 0x100000 [ 0.000000] Scanning 2 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 0000000000007000 (usable) [ 0.000000] modified: 0000000000007000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 0000000000092800 (usable) [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000007fee0000 (usable) [ 0.000000] modified: 000000007fee0000 - 000000007feec000 (ACPI data) [ 0.000000] modified: 000000007feec000 - 000000007ff00000 (ACPI NVS) [ 0.000000] modified: 000000007ff00000 - 0000000080000000 (reserved) [ 0.000000] modified: 00000000fec10000 - 00000000fec20000 (reserved) [ 0.000000] modified: 00000000ff800000 - 00000000ffc00000 (reserved) [ 0.000000] modified: 00000000fffffc00 - 0000000100000000 (reserved) [ 0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000 [ 0.000000] RAMDISK: 378c1000 - 37fefd1d [ 0.000000] Allocated new RAMDISK: 00881000 - 00fafd1d [ 0.000000] Move RAMDISK from 00000000378c1000 - 0000000037fefd1c to 00881000 - 00fafd1c [ 0.000000] ACPI: RSDP 000F62C0, 0014 (r0 ACER ) [ 0.000000] ACPI: RSDT 7FEE6205, 0030 (r1 ACER Kestrel 20021012 LTP 0) [ 0.000000] ACPI: FACP 7FEEBF2C, 0074 (r1 ACER Kestrel 20021012 PTL 50) [ 0.000000] ACPI: DSDT 7FEE6235, 5CF7 (r1 ACER Kestrel 20021012 MSFT 100000E) [ 0.000000] ACPI: FACS 7FEFCFC0, 0040 [ 0.000000] ACPI: HPET 7FEEBFA0, 0038 (r1 ACER Kestrel 20021012 PTL 0) [ 0.000000] ACPI: BOOT 7FEEBFD8, 0028 (r1 ACER Kestrel 20021012 LTP 1) [ 0.000000] 1162MB HIGHMEM available. [ 0.000000] 883MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 373fe000 [ 0.000000] low ram: 00000000 - 373fe000 [ 0.000000] bootmap 00012000 - 00018e80 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 000087c52c] TEXT DATA BSS ==> [0000100000 - 000087c52c] [ 0.000000] #4 [000087d000 - 0000881000] INIT_PG_TABLE ==> [000087d000 - 0000881000] [ 0.000000] #5 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] [ 0.000000] #7 [0000881000 - 0000fafd1d] NEW RAMDISK ==> [0000881000 - 0000fafd1d] [ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000373fe [ 0.000000] HighMem 0x000373fe -> 0x0007fee0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[4] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x00000007 [ 0.000000] 0: 0x00000010 -> 0x00000092 [ 0.000000] 0: 0x00000100 -> 0x0007fee0 [ 0.000000] On node 0 totalpages: 523877 [ 0.000000] free_area_init_node: node 0, pgdat c06d0f00, node_mem_map c1000000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3941 pages, LIFO batch:0 [ 0.000000] Normal zone: 1736 pages used for memmap [ 0.000000] Normal zone: 220470 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2326 pages used for memmap [ 0.000000] HighMem zone: 295372 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0x0 is invalid [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 0000000000007000 - 0000000000010000 [ 0.000000] PM: Registered nosave memory: 0000000000092000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000 [ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:7ec10000) [ 0.000000] PERCPU: Allocating 45056 bytes of per cpu data [ 0.000000] NR_CPUS: 64, nr_cpu_ids: 1, nr_node_ids 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519783 [ 0.000000] Kernel command line: root=UUID=ef2291c3-edc1-4ebd-9b02-a4c1d58b9252 ro quiet splash [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] TSC: PIT calibration matches PMTIMER. 1 loops [ 0.000000] Detected 1498.669 MHz processor. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.004000] allocated 10480000 bytes of page_cgroup [ 0.004000] please try cgroup_disable=memory option if you don't want [ 0.004000] Scanning for low memory corruption every 60 seconds [ 0.004000] Memory: 2052148k/2096000k available (4127k kernel code, 42580k reserved, 2208k data, 532k init, 1190792k highmem) [ 0.004000] virtual kernel memory layout: [ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB) [ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB) [ 0.004000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB) [ 0.004000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB) [ 0.004000] .init : 0xc0737000 - 0xc07bc000 ( 532 kB) [ 0.004000] .data : 0xc0507dff - 0xc072fe60 (2208 kB) [ 0.004000] .text : 0xc0100000 - 0xc0507dff (4127 kB) [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.004015] Calibrating delay loop (skipped), value calculated using timer frequency.. 2997.33 BogoMIPS (lpj=5994676) [ 0.004042] Security Framework initialized [ 0.004057] SELinux: Disabled at boot. [ 0.004087] AppArmor: AppArmor initialized [ 0.004098] Mount-cache hash table entries: 512 [ 0.004289] Initializing cgroup subsys ns [ 0.004297] Initializing cgroup subsys cpuacct [ 0.004300] Initializing cgroup subsys memory [ 0.004306] Initializing cgroup subsys freezer [ 0.004327] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004330] CPU: L2 cache: 2048K [ 0.004350] Checking 'hlt' instruction... OK. [ 0.020800] SMP alternatives: switching to UP code [ 0.148514] Freeing SMP alternatives: 18k freed [ 0.148518] ACPI: Core revision 20080926 [ 0.154115] ACPI: Checking initramfs for custom DSDT [ 0.548119] ACPI: setting ELCR to 0200 (from 0440) [ 0.552063] weird, boot CPU (#0) not listedby the BIOS. [ 0.552066] SMP motherboard not detected. [ 0.552069] Local APIC not detected. Using dummy APIC emulation. [ 0.552072] SMP disabled [ 0.552345] Brought up 1 CPUs [ 0.552348] Total of 1 processors activated (2997.33 BogoMIPS). [ 0.552362] CPU0 attaching NULL sched-domain. [ 0.552657] net_namespace: 776 bytes [ 0.552668] Booting paravirtualized kernel on bare hardware [ 0.552914] Time: 23:10:30 Date: 03/28/09 [ 0.552921] regulator: core version 0.5 [ 0.552956] NET: Registered protocol family 16 [ 0.553097] EISA bus registered [ 0.553114] ACPI: bus type pci registered [ 0.554272] PCI: PCI BIOS revision 2.10 entry at 0xfd782, last bus=2 [ 0.554275] PCI: Using configuration type 1 for base access [ 0.556945] ACPI: EC: Look up EC in DSDT [ 0.561601] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 0.564175] ACPI: EC: GPE storm detected, transactions will use polling mode [ 0.592818] ACPI: Interpreter enabled [ 0.592823] ACPI: (supports S0 S3 S4 S5) [ 0.592842] ACPI: Using PIC for interrupt routing [ 0.598210] ACPI: EC: GPE = 0x1d, I/O: command/status = 0x66, data = 0x62 [ 0.598213] ACPI: EC: driver started in interrupt mode [ 0.598878] ACPI: ACPI Dock Station Driver: 1 docks/bays found [ 0.598890] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.598937] pci 0000:00:00.0: reg 10 32bit mmio: [0xe0000000-0xefffffff] [ 0.599089] pci 0000:00:1d.0: reg 20 io port: [0x1800-0x181f] [ 0.599135] pci 0000:00:1d.1: reg 20 io port: [0x1820-0x183f] [ 0.599181] pci 0000:00:1d.2: reg 20 io port: [0x1840-0x185f] [ 0.599235] pci 0000:00:1d.7: reg 10 32bit mmio: [0xd0000000-0xd00003ff] [ 0.599275] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.599281] pci 0000:00:1d.7: PME# disabled [ 0.599353] HPET not enabled in BIOS. You might try hpet=force boot option [ 0.599360] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO [ 0.599364] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH4 GPIO [ 0.599383] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] [ 0.599390] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] [ 0.599397] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] [ 0.599404] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] [ 0.599411] pci 0000:00:1f.1: reg 20 io port: [0x1860-0x186f] [ 0.599418] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff] [ 0.599463] pci 0000:00:1f.3: reg 20 io port: [0x1880-0x189f] [ 0.599500] pci 0000:00:1f.5: reg 10 io port: [0x1c00-0x1cff] [ 0.599507] pci 0000:00:1f.5: reg 14 io port: [0x18c0-0x18ff] [ 0.599513] pci 0000:00:1f.5: reg 18 32bit mmio: [0xd0000c00-0xd0000dff] [ 0.599520] pci 0000:00:1f.5: reg 1c 32bit mmio: [0xd0000800-0xd00008ff] [ 0.599541] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold [ 0.599545] pci 0000:00:1f.5: PME# disabled [ 0.599571] pci 0000:00:1f.6: reg 10 io port: [0x2400-0x24ff] [ 0.599578] pci 0000:00:1f.6: reg 14 io port: [0x2000-0x207f] [ 0.599605] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold [ 0.599610] pci 0000:00:1f.6: PME# disabled [ 0.599643] pci 0000:01:00.0: reg 10 32bit mmio: [0xd8000000-0xdfffffff] [ 0.599649] pci 0000:01:00.0: reg 14 io port: [0x3000-0x30ff] [ 0.599655] pci 0000:01:00.0: reg 18 32bit mmio: [0xd0100000-0xd010ffff] [ 0.599670] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 0.599679] pci 0000:01:00.0: supports D1 D2 [ 0.599711] pci 0000:00:01.0: bridge io port: [0x3000-0x3fff] [ 0.599715] pci 0000:00:01.0: bridge 32bit mmio: [0xd0100000-0xd01fffff] [ 0.599720] pci 0000:00:01.0: bridge 32bit mmio pref: [0xd8000000-0xdfffffff] [ 0.599751] pci 0000:02:02.0: reg 10 32bit mmio: [0xd0204000-0xd0205fff] [ 0.599776] pci 0000:02:02.0: reg 30 32bit mmio: [0x000000-0x003fff] [ 0.599784] pci 0000:02:02.0: supports D1 D2 [ 0.599787] pci 0000:02:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.599791] pci 0000:02:02.0: PME# disabled [ 0.599821] pci 0000:02:04.0: reg 10 32bit mmio: [0xd0208000-0xd0208fff] [ 0.599855] pci 0000:02:04.0: PME# supported from D0 D3hot D3cold [ 0.599859] pci 0000:02:04.0: PME# disabled [ 0.599890] pci 0000:02:06.0: reg 10 32bit mmio: [0xd0209000-0xd0209fff] [ 0.599900] pci 0000:02:06.0: supports D1 D2 [ 0.599902] pci 0000:02:06.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.599907] pci 0000:02:06.0: PME# disabled [ 0.599937] pci 0000:02:06.2: reg 10 32bit mmio: [0xd020a000-0xd020a7ff] [ 0.599944] pci 0000:02:06.2: reg 14 32bit mmio: [0xd0200000-0xd0203fff] [ 0.599974] pci 0000:02:06.2: supports D1 D2 [ 0.599977] pci 0000:02:06.2: PME# supported from D0 D1 D2 D3hot [ 0.599981] pci 0000:02:06.2: PME# disabled [ 0.600018] pci 0000:02:06.3: reg 10 32bit mmio: [0xd0206000-0xd0207fff] [ 0.600050] pci 0000:02:06.3: supports D1 D2 [ 0.600053] pci 0000:02:06.3: PME# supported from D0 D1 D2 D3hot [ 0.600057] pci 0000:02:06.3: PME# disabled [ 0.600091] pci 0000:00:1e.0: transparent bridge [ 0.600096] pci 0000:00:1e.0: bridge io port: [0x4000-0x4fff] [ 0.600101] pci 0000:00:1e.0: bridge 32bit mmio: [0xd0200000-0xd05fffff] [ 0.600128] bus 00 -> node 0 [ 0.600135] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.600445] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 0.600472] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 0.603017] ACPI: PCI Interrupt Link [LNKA] (IRQs *6) [ 0.603153] ACPI: PCI Interrupt Link [LNKB] (IRQs *10) [ 0.603287] ACPI: PCI Interrupt Link [LNKC] (IRQs *6) [ 0.603420] ACPI: PCI Interrupt Link [LNKD] (IRQs *6) [ 0.603557] ACPI: PCI Interrupt Link [LNKE] (IRQs *10) [ 0.603690] ACPI: PCI Interrupt Link [LNKF] (IRQs 10) *0, disabled. [ 0.603824] ACPI: PCI Interrupt Link [LNKG] (IRQs 6) *0, disabled. [ 0.603958] ACPI: PCI Interrupt Link [LNKH] (IRQs *10) [ 0.604087] ACPI: Power Resource [PFN0] (off) [ 0.604136] ACPI: Power Resource [PFN1] (off) [ 0.604216] ACPI: WMI: Mapper loaded [ 0.604397] SCSI subsystem initialized [ 0.604440] libata version 3.00 loaded. [ 0.604493] usbcore: registered new interface driver usbfs [ 0.604512] usbcore: registered new interface driver hub [ 0.604541] usbcore: registered new device driver usb [ 0.604669] PCI: Using ACPI for IRQ routing [ 0.604769] Bluetooth: Core ver 2.13 [ 0.604769] NET: Registered protocol family 31 [ 0.604769] Bluetooth: HCI device and connection manager initialized [ 0.604769] Bluetooth: HCI socket layer initialized [ 0.604769] NET: Registered protocol family 8 [ 0.604769] NET: Registered protocol family 20 [ 0.604769] NetLabel: Initializing [ 0.604769] NetLabel: domain hash size = 128 [ 0.604769] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.604769] NetLabel: unlabeled traffic allowed by default [ 0.604769] AppArmor: AppArmor Filesystem Enabled [ 0.604769] pnp: PnP ACPI init [ 0.604769] ACPI: bus type pnp registered [ 0.608735] pnp: PnP ACPI: found 9 devices [ 0.608738] ACPI: ACPI bus type pnp unregistered [ 0.608742] PnPBIOS: Disabled by ACPI PNP [ 0.608754] system 00:04: ioport range 0x164e-0x164f has been reserved [ 0.608760] system 00:04: ioport range 0x600-0x60f has been reserved [ 0.608764] system 00:04: ioport range 0x700-0x70f has been reserved [ 0.608767] system 00:04: ioport range 0x800-0x80f has been reserved [ 0.608770] system 00:04: ioport range 0x1000-0x107f has been reserved [ 0.608774] system 00:04: ioport range 0x1180-0x11bf has been reserved [ 0.608778] system 00:04: ioport range 0x1c0-0x1cf has been reserved [ 0.608782] system 00:04: ioport range 0xfe00-0xfe00 has been reserved [ 0.608785] system 00:04: ioport range 0x4d0-0x4d1 has been reserved [ 0.608789] system 00:04: ioport range 0x610-0x61f has been reserved [ 0.608794] system 00:04: iomem range 0xfec10000-0xfec1ffff has been reserved [ 0.608797] system 00:04: iomem range 0xff800000-0xffbfffff has been reserved [ 0.608801] system 00:04: iomem range 0xfff00000-0xffffffff could not be reserved [ 0.608805] system 00:04: iomem range 0x0-0x9ffff could not be reserved [ 0.608809] system 00:04: iomem range 0xe0000-0xfffff could not be reserved [ 0.608812] system 00:04: iomem range 0xdf800-0xdffff could not be reserved [ 0.643546] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.643550] pci 0000:00:01.0: IO window: 0x3000-0x3fff [ 0.643554] pci 0000:00:01.0: MEM window: 0xd0100000-0xd01fffff [ 0.643558] pci 0000:00:01.0: PREFETCH window: 0x000000d8000000-0x000000dfffffff [ 0.643567] pci 0000:02:06.0: CardBus bridge, secondary bus 0000:03 [ 0.643570] pci 0000:02:06.0: IO window: 0x004000-0x0040ff [ 0.643575] pci 0000:02:06.0: IO window: 0x004400-0x0044ff [ 0.643579] pci 0000:02:06.0: PREFETCH window: 0x88000000-0x8bffffff [ 0.643584] pci 0000:02:06.0: MEM window: 0x90000000-0x93ffffff [ 0.643589] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02 [ 0.643593] pci 0000:00:1e.0: IO window: 0x4000-0x4fff [ 0.643598] pci 0000:00:1e.0: MEM window: 0xd0200000-0xd05fffff [ 0.643603] pci 0000:00:1e.0: PREFETCH window: 0x00000088000000-0x0000008dffffff [ 0.643619] pci 0000:00:1e.0: setting latency timer to 64 [ 0.643627] pci 0000:02:06.0: enabling device (0104 -> 0107) [ 0.643834] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10 [ 0.643837] PCI: setting IRQ 10 as level-triggered [ 0.643842] pci 0000:02:06.0: PCI INT A -> Link[LNKE] -> GSI 10 (level, low) -> IRQ 10 [ 0.643849] bus: 00 index 0 io port: [0x00-0xffff] [ 0.643852] bus: 00 index 1 mmio: [0x000000-0xffffffff] [ 0.643855] bus: 01 index 0 io port: [0x3000-0x3fff] [ 0.643858] bus: 01 index 1 mmio: [0xd0100000-0xd01fffff] [ 0.643860] bus: 01 index 2 mmio: [0xd8000000-0xdfffffff] [ 0.643863] bus: 01 index 3 mmio: [0x0-0x0] [ 0.643866] bus: 02 index 0 io port: [0x4000-0x4fff] [ 0.643869] bus: 02 index 1 mmio: [0xd0200000-0xd05fffff] [ 0.643871] bus: 02 index 2 mmio: [0x88000000-0x8dffffff] [ 0.643874] bus: 02 index 3 io port: [0x00-0xffff] [ 0.643877] bus: 02 index 4 mmio: [0x000000-0xffffffff] [ 0.643880] bus: 03 index 0 io port: [0x4000-0x40ff] [ 0.643882] bus: 03 index 1 io port: [0x4400-0x44ff] [ 0.643885] bus: 03 index 2 mmio: [0x88000000-0x8bffffff] [ 0.643888] bus: 03 index 3 mmio: [0x90000000-0x93ffffff] [ 0.643897] NET: Registered protocol family 2 [ 0.644028] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.644321] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.645105] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.645601] TCP: Hash tables configured (established 131072 bind 65536) [ 0.645605] TCP reno registered [ 0.645752] NET: Registered protocol family 1 [ 0.645905] checking if image is initramfs... it is [ 1.144076] Switched to high resolution mode on CPU 0 [ 1.450749] Freeing initrd memory: 7355k freed [ 1.450809] Simple Boot Flag at 0x37 set to 0x1 [ 1.450845] cpufreq: No nForce2 chipset. [ 1.451023] audit: initializing netlink socket (disabled) [ 1.451051] type=2000 audit(1238281831.448:1): initialized [ 1.460836] highmem bounce pool size: 64 pages [ 1.460843] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 1.462444] VFS: Disk quotas dquot_6.5.1 [ 1.462511] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.463240] fuse init (API version 7.10) [ 1.463341] msgmni has been set to 1698 [ 1.463556] alg: No test for stdrng (krng) [ 1.463570] io scheduler noop registered [ 1.463573] io scheduler anticipatory registered [ 1.463575] io scheduler deadline registered [ 1.463593] io scheduler cfq registered (default) [ 1.463686] pci 0000:01:00.0: Boot video device [ 1.467685] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.467696] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.467849] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.467853] ACPI: Power Button (FF) [PWRF] [ 1.467918] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 [ 1.470624] ACPI: Lid Switch [LID] [ 1.470678] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 [ 1.470682] ACPI: Sleep Button (CM) [SLPB] [ 1.470857] fan PNP0C0B:00: registered as cooling_device0 [ 1.470864] ACPI: Fan [FAN0] (off) [ 1.471011] fan PNP0C0B:01: registered as cooling_device1 [ 1.471018] ACPI: Fan [FAN1] (off) [ 1.471171] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 1.471202] processor ACPI_CPU:00: registered as cooling_device2 [ 1.471207] ACPI: Processor [CPU0] (supports 8 throttling states) [ 1.476622] thermal LNXTHERM:01: registered as thermal_zone0 [ 1.483802] ACPI: Thermal Zone [THRM] (53 C) [ 1.483831] ACPI: SBS HC: EC = 0xf6c0ce40, offset = 0x18, query_bit = 0x20 [ 1.497853] ACPI: Smart Battery System [SBS0]: AC Adapter [AC0] (on-line) [ 1.843955] ACPI: Smart Battery System [SBS0]: Battery Slot [BAT0] (battery present) [ 1.875827] ACPI: Smart Battery System [SBS0]: Battery Slot [BAT1] (battery absent) [ 1.875848] isapnp: Scanning for PnP cards... [ 2.229866] isapnp: No Plug & Play device found [ 2.339218] Serial: 8250/16550 driver4 ports, IRQ sharing enabled [ 2.339328] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A [ 2.339879] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 [ 2.339884] serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10 [ 2.339892] serial 0000:00:1f.6: PCI INT B disabled [ 2.340687] brd: module loaded [ 2.341035] loop: module loaded [ 2.341130] Fixed MDIO Bus: probed [ 2.341138] PPP generic driver version 2.4.2 [ 2.341204] input: Macintosh mouse button emulation as /devices/virtual/input/input3 [ 2.341235] Driver 'sd' needs updating - please use bus_type methods [ 2.341246] Driver 'sr' needs updating - please use bus_type methods [ 2.341335] ata_piix 0000:00:1f.1: version 2.12 [ 2.341346] ata_piix 0000:00:1f.1: power state changed by ACPI to D0 [ 2.341350] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007) [ 2.341557] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 6 [ 2.341560] PCI: setting IRQ 6 as level-triggered [ 2.341565] ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 6 (level, low) -> IRQ 6 [ 2.341607] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 2.341697] scsi0 : ata_piix [ 2.341787] scsi1 : ata_piix [ 2.343034] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1860 irq 14 [ 2.343038] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1868 irq 15 [ 2.520530] ata1.00: ATA-6: FUJITSU MHT2060AT, 0022, max UDMA/100 [ 2.520533] ata1.00: 117210240 sectors, multi 16: LBA [ 2.552580] ata1.00: configured for UDMA/100 [ 2.716328] ata2.00: ATAPI: HL-DT-ST DVD+RW GCA-4040N, 1.02, max UDMA/33 [ 2.732319] ata2.00: configured for UDMA/33 [ 2.733481] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHT2060A 0022 PQ: 0 ANSI: 5 [ 2.733594] sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors: (60.0 GB/55.8 GiB) [ 2.733614] sd 0:0:0:0: [sda] Write Protect is off [ 2.733618] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.733647] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.733714] sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors: (60.0 GB/55.8 GiB) [ 2.733731] sd 0:0:0:0: [sda] Write Protect is off [ 2.733734] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.733762] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.733767] sda: sda1 < sda5 > sda2 sda3 sda4 [ 2.949640] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.949687] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.950346] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD+RW GCA-4040N 1.02 PQ: 0 ANSI: 5 [ 2.953594] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 2.953598] Uniform CD-ROM driver Revision: 3.20 [ 2.953694] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.953736] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 2.954445] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.954674] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10 [ 2.954678] ehci_hcd 0000:00:1d.7: PCI INT D -> Link[LNKH] -> GSI 10 (level, low) -> IRQ 10 [ 2.954703] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 2.954707] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 2.954785] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 2.958696] ehci_hcd 0000:00:1d.7: debug port 1 [ 2.958703] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 2.958711] ehci_hcd 0000:00:1d.7: irq 10, io mem 0xd0000000 [ 2.972026] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 2.972118] usb usb1: configuration #1 chosen from 1 choice [ 2.972163] hub 1-0:1.0: USB hub found [ 2.972176] hub 1-0:1.0: 6 ports detected [ 2.972293] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.972312] uhci_hcd: USB Universal Host Controller Interface driver [ 2.972537] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 6 [ 2.972542] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 6 (level, low) -> IRQ 6 [ 2.972548] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 2.972552] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 2.972603] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 2.972624] uhci_hcd 0000:00:1d.0: irq 6, io base 0x00001800 [ 2.972713] usb usb2: configuration #1 chosen from 1 choice [ 2.972742] hub 2-0:1.0: USB hub found [ 2.972750] hub 2-0:1.0: 2 ports detected [ 2.973034] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 6 [ 2.973039] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 6 (level, low) -> IRQ 6 [ 2.973045] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 2.973049] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 2.973096] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 2.973116] uhci_hcd 0000:00:1d.1: irq 6, io base 0x00001820 [ 2.973201] usb usb3: configuration #1 chosen from 1 choice [ 2.973234] hub 3-0:1.0: USB hub found [ 2.973241] hub 3-0:1.0: 2 ports detected [ 2.973325] uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 6 (level, low) -> IRQ 6 [ 2.973332] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 2.973335] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 2.973380] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 2.973399] uhci_hcd 0000:00:1d.2: irq 6, io base 0x00001840 [ 2.973484] usb usb4: configuration #1 chosen from 1 choice [ 2.973513] hub 4-0:1.0: USB hub found [ 2.973520] hub 4-0:1.0: 2 ports detected [ 2.973652] usbcore: registered new interface driver libusual [ 2.973689] usbcore: registered new interface driver usbserial [ 2.973702] USB Serial support registered for generic [ 2.973718] usbcore: registered new interface driver usbserial_generic [ 2.973720] usbserial: USB Serial Driver core [ 2.973773] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOU2] at 0x60,0x64 irq 1,12 [ 2.976558] i8042.c: Detected active multiplexing controller, rev 1.1. [ 2.977568] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.977575] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 2.977578] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 2.977581] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 2.977584] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 2.977759] mice: PS/2 mouse device common for all mice [ 2.977975] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 2.977992] rtc0: alarms up to one month, y3k, 242 bytes nvram [ 2.978063] device-mapper: uevent: version 1.0.3 [ 2.978178] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com [ 2.978230] device-mapper: multipath: version 1.0.5 loaded [ 2.978233] device-mapper: multipath round-robin: version 1.0.0 loaded [ 2.978316] EISA: Probing bus 0 at eisa.0 [ 2.978324] Cannot allocate resource for EISA slot 1 [ 2.978327] Cannot allocate resource for EISA slot 2 [ 2.978330] Cannot allocate resource for EISA slot 3 [ 2.978333] Cannot allocate resource for EISA slot 4 [ 2.978351] EISA: Detected 0 cards. [ 2.978421] cpuidle: using governor ladder [ 2.978493] cpuidle: using governor menu [ 2.979068] TCP cubic registered [ 2.979189] NET: Registered protocol family 10 [ 2.979647] lo: Disabled Privacy Extensions [ 2.980028] NET: Registered protocol family 17 [ 2.980047] Bluetooth: L2CAP ver 2.11 [ 2.980049] Bluetooth: L2CAP socket layer initialized [ 2.980053] Bluetooth: SCO (Voice Link) ver 0.6 [ 2.980055] Bluetooth: SCO socket layer initialized [ 2.980081] Bluetooth: RFCOMM socket layer initialized [ 2.980088] Bluetooth: RFCOMM TTY layer initialized [ 2.980090] Bluetooth: RFCOMM ver 1.10 [ 2.980260] Marking TSC unstable due to cpufreq changes [ 2.980518] IO APIC resources could be not be allocated. [ 2.980555] Using IPI No-Shortcut mode [ 2.980630] registered taskstats version 1 [ 2.980743] Magic number: 1:144:202 [ 2.980802] rtc_cmos 00:01: setting system clock to 2009-03-28 23:10:33 UTC (1238281833) [ 2.980805] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.980808] EDD information not available. [ 2.981103] Freeing unused kernel memory: 532k freed [ 2.981221] Write protecting the kernel text: 4128k [ 2.981263] Write protecting the kernel read-only data: 1532k [ 3.024618] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 3.076850] hub 2-0:1.0: over-current change on port 1 [ 3.180031] hub 2-0:1.0: over-current change on port 2 [ 3.503241] b44 0000:02:02.0: PCI INT A -> Link[LNKD] -> GSI 6 (level, low) -> IRQ 6 [ 3.560112] ssb: Sonics Silicon Backplane found on PCI device 0000:02:02.0 [ 3.560138] b44.c:v2.0 [ 3.560169] ohci1394 0000:02:06.2: PCI INT A -> Link[LNKE] -> GSI 10 (level, low) -> IRQ 10 [ 3.616920] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10] MMIO=[d020a000-d020a7ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 3.632729] eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:c0:9f:4e:4c:cb [ 3.676036] usb 3-1: new full speed USB device using uhci_hcd and address 2 [ 3.894827] usb 3-1: configuration #1 chosen from 1 choice [ 3.897446] hub 1-0:1.0: over-current change on port 1 [ 4.000048] hub 1-0:1.0: over-current change on port 2 [ 4.254639] PM: Starting manual resume from disk [ 4.254643] PM: Resume from partition 8:2 [ 4.254644] PM: Checking hibernation image. [ 4.254930] PM: Resume from disk failed. [ 4.257423] EXT3-fs: INFO: recovery required on readonly filesystem. [ 4.257426] EXT3-fs: write access will be enabled during recovery. [ 4.896823] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00c09f000022e320] [ 5.070526] kjournald starting. Commit interval 5 seconds [ 5.070539] EXT3-fs: sda5: orphan cleanup on readonly fs [ 5.070544] ext3_orphan_cleanup: deleting unreferenced inode 33095 [ 5.070575] EXT3-fs: sda5: 1 orphan inode deleted [ 5.070577] EXT3-fs: recovery complete. [ 5.079787] EXT3-fs: mounted filesystem with ordered data mode. [ 11.992559] udev: starting version 140 [ 12.300096] irda_init() [ 12.300108] NET: Registered protocol family 23 [ 13.041345] Bluetooth: Generic Bluetooth USB driver ver 0.3 [ 13.041446] usbcore: registered new interface driver btusb [ 13.211077] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 13.214227] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume [ 13.226621] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 1. [ 13.226644] nsc-ircc, chip->init [ 13.226652] nsc-ircc, Found chip at base=0x164e [ 13.226674] nsc-ircc, driver loaded (Dag Brattli) [ 13.226679] nsc_ircc_open(), can't get iobase of 0x2f8 [ 13.226703] nsc-ircc, Found chip at base=0x164e [ 13.226724] nsc-ircc, driver loaded (Dag Brattli) [ 13.226727] nsc_ircc_open(), can't get iobase of 0x2f8 [ 13.226936] nsc-ircc 00:08: disabled [ 13.237452] Linux agpgart interface v0.103 [ 13.253144] intel_rng: FWH not detected [ 13.299324] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 13.311493] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:02/device:03/input/input6 [ 13.332354] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 13.445396] acer-wmi: Acer Laptop ACPI-WMI Extras [ 13.445411] acer-wmi: No or unsupported WMI interface, unable to load [ 13.484360] agpgart-intel 0000:00:00.0: Intel 855GM Chipset [ 13.506373] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 [ 13.517817] iTCO_vendor_support: vendor-support=0 [ 13.546058] ieee80211_crypt: registered algorithm 'NULL' [ 13.551177] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 13.551181] ieee80211: Copyright (C) 2004-2005 Intel Corporation [ 13.632844] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 [ 13.632959] iTCO_wdt: Found a ICH4-M TCO device (Version=1, TCOBASE=0x1060) [ 13.633033] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 13.679376] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq [ 13.679380] ipw2200: Copyright(c) 2003-2006 Intel Corporation [ 13.680128] ipw2200 0000:02:04.0: PCI INT A -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10 [ 13.685425] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection [ 13.685467] ipw2200 0000:02:04.0: firmware: requesting ipw2200-bss.fw [ 13.940836] ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels) [ 13.940980] yenta_cardbus 0000:02:06.0: CardBus bridge found [1025:0064] [ 13.940994] yenta_cardbus 0000:02:06.0: Enabling burst memory read transactions [ 13.940999] yenta_cardbus 0000:02:06.0: Using CSCINT to route CSC interrupts to PCI [ 13.941002] yenta_cardbus 0000:02:06.0: Routing CardBus interrupts to PCI [ 13.941007] yenta_cardbus 0000:02:06.0: TI: mfunc 0x01a21b22, devctl 0x64 [ 14.038066] Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10 [ 14.038108] Intel ICH 0000:00:1f.5: setting latency timer to 64 [ 14.172745] yenta_cardbus 0000:02:06.0: ISA IRQ mask 0x08b8, PCI irq 10 [ 14.172750] yenta_cardbus 0000:02:06.0: Socket status: 30000006 [ 14.172754] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #02 to #06 [ 14.172761] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff [ 14.172765] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x4000-0x4fff: clean. [ 14.173008] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xd05fffff [ 14.173011] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x8dffffff [ 14.173783] tifm_7xx1 0000:02:06.3: PCI INT A -> Link[LNKE] -> GSI 10 (level, low) -> IRQ 10 [ 14.218871] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x126eb1, caps: 0xa04713/0x4000 [ 14.260660] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input7 [ 14.356042] intel8x0_measure_ac97_clock: measured 53967 usecs [ 14.356046] intel8x0: clocking to 48000 [ 14.505903] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean. [ 14.507278] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean. [ 14.508188] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. [ 14.508695] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. [ 14.509356] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. [ 14.687274] lp: driver loaded but no devices found [ 14.758148] Adding 4393768k swap on /dev/sda2. Priority:-1 extents:1 across:4393768k [ 15.403924] EXT3 FS on sda5, internal journal [ 16.385832] type=1505 audit(1238281846.903:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=1848 [ 16.450313] type=1505 audit(1238281846.967:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=1852 [ 16.450439] type=1505 audit(1238281846.967:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=1852 [ 16.450489] type=1505 audit(1238281846.967:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=1852 [ 16.450533] type=1505 audit(1238281846.967:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=1852 [ 16.638850] type=1505 audit(1238281847.155:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=1857 [ 16.639112] type=1505 audit(1238281847.155:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=1857 [ 16.699476] type=1505 audit(1238281847.215:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=1861 [ 21.713406] ttyS1: LSR safety check engaged! [ 22.026038] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 22.026042] Bluetooth: BNEP filters: protocol multicast [ 22.050326] Bridge firewalling registered [ 23.620704] pci 0000:01:00.0: power state changed by ACPI to D0 [ 23.620715] pci 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 6 (level, low) -> IRQ 6 [ 23.835430] [drm] Initialized drm 1.1.0 20060810 [ 23.866529] [drm] Initialized radeon 1.29.0 20080528 on minor 0 [ 24.030604] agpgart-intel 0000:00:00.0: AGP 2.0 bridge [ 24.030622] agpgart-intel 0000:00:00.0: putting AGP V2 device into 1x mode [ 24.030654] pci 0000:01:00.0: putting AGP V2 device into 1x mode [ 24.196549] ppdev: user-space parallel port driver [ 24.275076] [drm] Setting GART location based on new memory map [ 24.275082] [drm] Loading R300 Microcode [ 24.275124] [drm] Num pipes: 1 [ 24.275130] [drm] writeback test succeeded in 1 usecs [ 27.485653] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 37.792025] eth1: no IPv6 routers present [ 53.135470] ieee80211_crypt: registered algorithm 'TKIP' [ 86.140028] Clocksource tsc unstable (delta = -79513807 ns) [ 891.758274] b44: eth0: powering down PHY [ 892.396416] [drm] Num pipes: 1 [ 892.977366] PM: Syncing filesystems ... done. [ 892.984098] PM: Preparing system for mem sleep [ 892.984102] Freezing user space processes ... (elapsed 0.00 seconds) done. [ 892.985065] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [ 892.985109] PM: Entering mem sleep [ 892.985123] Suspending console(s) (use no_console_suspend to debug) [ 892.987254] btusb_intr_complete: hci0 urb f5ed1400 failed to resubmit (1) [ 893.897962] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 893.898491] sd 0:0:0:0: [sda] Stopping disk [ 895.005431] ACPI handle has no context! [ 895.005439] tifm_7xx1 0000:02:06.3: PCI INT A disabled [ 895.005443] ACPI handle has no context! [ 895.036079] eth1: Going into suspend... [ 895.042341] ipw2200 0000:02:04.0: PCI INT A disabled [ 895.056064] b44 0000:02:02.0: PCI INT A disabled [ 895.072470] Intel ICH 0000:00:1f.5: PCI INT B disabled [ 895.072688] ata_piix 0000:00:1f.1: PCI INT A disabled [ 895.072742] ata_piix 0000:00:1f.1: power state changed by ACPI to D3 [ 895.072814] ehci_hcd 0000:00:1d.7: PCI INT D disabled [ 895.088060] uhci_hcd 0000:00:1d.2: PCI INT C disabled [ 895.088082] uhci_hcd 0000:00:1d.1: PCI INT B disabled [ 895.088103] uhci_hcd 0000:00:1d.0: PCI INT A disabled [ 895.132931] PM: suspend devices took 2.148 seconds [ 895.133318] ACPI: Preparing to enter system sleep state S3 [ 895.888101] Disabling non-boot CPUs ... [ 895.888175] cpufreq: suspend failed to assert current frequency is what timing core thinks it is. [ 895.888175] Back to C! [ 895.888175] cpufreq: resume failed to assert current frequency is what timing core thinks it is. [ 895.905006] ACPI: Waking up from system sleep state S3 [ 896.220397] agpgart-intel 0000:00:00.0: restoring config space at offset 0x1 (was 0x20900106, writing 0x30900106) [ 896.220417] pm_op(): pci_pm_resume+0x0/0x70 returns -16 [ 896.220437] PM: Device 0000:00:00.0 failed to resume: error -16 [ 896.220549] pci 0000:00:01.0: restoring config space at offset 0x7 (was 0x2a03030, writing 0x22a03030) [ 896.220599] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 6 (level, low) -> IRQ 6 [ 896.220604] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 896.220636] usb usb2: root hub lost power or was reset [ 896.220689] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 6 (level, low) -> IRQ 6 [ 896.220693] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 896.220725] usb usb3: root hub lost power or was reset [ 896.220785] uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 6 (level, low) -> IRQ 6 [ 896.220789] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 896.220820] usb usb4: root hub lost power or was reset [ 896.236043] ehci_hcd 0000:00:1d.7: PCI INT D -> Link[LNKH] -> GSI 10 (level, low) -> IRQ 10 [ 896.236047] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 896.236073] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900106) [ 896.236129] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0xfff0, writing 0x8df08800) [ 896.236135] pci 0000:00:1e.0: restoring config space at offset 0x6 (was 0x40020200, writing 0x40060200) [ 896.236143] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x80800105, writing 0x88800107) [ 896.236152] pci 0000:00:1e.0: setting latency timer to 64 [ 896.236467] ata_piix 0000:00:1f.1: power state changed by ACPI to D0 [ 896.236472] ata_piix 0000:00:1f.1: restoring config space at offset 0xf (was 0x100, writing 0x1ff) [ 896.236481] ata_piix 0000:00:1f.1: restoring config space at offset 0x9 (was 0x0, writing 0x8e000000) [ 896.236491] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800007) [ 896.236501] ata_piix 0000:00:1f.1: power state changed by ACPI to D0 [ 896.236506] ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 6 (level, low) -> IRQ 6 [ 896.236510] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 896.241155] Intel ICH 0000:00:1f.5: restoring config space at offset 0xf (was 0x200, writing 0x20a) [ 896.241166] Intel ICH 0000:00:1f.5: restoring config space at offset 0x7 (was 0x0, writing 0xd0000800) [ 896.241170] Intel ICH 0000:00:1f.5: restoring config space at offset 0x6 (was 0x0, writing 0xd0000c00) [ 896.241175] Intel ICH 0000:00:1f.5: restoring config space at offset 0x5 (was 0x1301, writing 0x18c1) [ 896.241179] Intel ICH 0000:00:1f.5: restoring config space at offset 0x4 (was 0x1201, writing 0x1c01) [ 896.241185] Intel ICH 0000:00:1f.5: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900003) [ 896.241196] Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10 [ 896.241200] Intel ICH 0000:00:1f.5: setting latency timer to 64 [ 896.249390] pci 0000:00:1f.6: restoring config space at offset 0xf (was 0x200, writing 0x20a) [ 896.249405] pci 0000:00:1f.6: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 896.249470] pci 0000:01:00.0: power state changed by ACPI to D0 [ 896.249475] pci 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 6 (level, low) -> IRQ 6 [ 896.264040] b44 0000:02:02.0: enabling device (0000 -> 0002) [ 896.264044] b44 0000:02:02.0: PCI INT A -> Link[LNKD] -> GSI 6 (level, low) -> IRQ 6 [ 896.264051] b44 0000:02:02.0: restoring config space at offset 0xf (was 0x100, writing 0x106) [ 896.264062] b44 0000:02:02.0: restoring config space at offset 0x4 (was 0x0, writing 0xd0204000) [ 896.264067] b44 0000:02:02.0: restoring config space at offset 0x3 (was 0x0, writing 0x4000) [ 896.264072] b44 0000:02:02.0: restoring config space at offset 0x1 (was 0x100002, writing 0x8100106) [ 896.284073] eth1: Coming out of suspend... [ 896.300025] ipw2200 0000:02:04.0: enabling device (0000 -> 0002) [ 896.300030] ipw2200 0000:02:04.0: PCI INT A -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10 [ 896.300037] ipw2200 0000:02:04.0: restoring config space at offset 0xf (was 0x18030100, writing 0x1803010a) [ 896.300050] ipw2200 0000:02:04.0: restoring config space at offset 0x4 (was 0x0, writing 0xd0208000) [ 896.300055] ipw2200 0000:02:04.0: restoring config space at offset 0x3 (was 0x0, writing 0x4008) [ 896.300060] ipw2200 0000:02:04.0: restoring config space at offset 0x1 (was 0x2900002, writing 0x2900116) [ 896.430130] yenta_cardbus 0000:02:06.0: restoring config space at offset 0xf (was 0x34001ff, writing 0x5c0010a) [ 896.430135] yenta_cardbus 0000:02:06.0: restoring config space at offset 0xe (was 0x0, writing 0x44fc) [ 896.430140] yenta_cardbus 0000:02:06.0: restoring config space at offset 0xd (was 0x0, writing 0x4400) [ 896.430144] yenta_cardbus 0000:02:06.0: restoring config space at offset 0xc (was 0x0, writing 0x40fc) [ 896.430149] yenta_cardbus 0000:02:06.0: restoring config space at offset 0xb (was 0x0, writing 0x4000) [ 896.430153] yenta_cardbus 0000:02:06.0: restoring config space at offset 0xa (was 0x0, writing 0x93fff000) [ 896.430158] yenta_cardbus 0000:02:06.0: restoring config space at offset 0x9 (was 0x0, writing 0x90000000) [ 896.430163] yenta_cardbus 0000:02:06.0: restoring config space at offset 0x8 (was 0x0, writing 0x8bfff000) [ 896.430167] yenta_cardbus 0000:02:06.0: restoring config space at offset 0x7 (was 0x0, writing 0x88000000) [ 896.430172] yenta_cardbus 0000:02:06.0: restoring config space at offset 0x6 (was 0x0, writing 0xb0060302) [ 896.430177] yenta_cardbus 0000:02:06.0: restoring config space at offset 0x4 (was 0x0, writing 0xd0209000) [ 896.430182] yenta_cardbus 0000:02:06.0: restoring config space at offset 0x3 (was 0x820000, writing 0x82a820) [ 896.430188] yenta_cardbus 0000:02:06.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100007) [ 896.437411] ata2.00: ACPI cmd 03/42:00:00:00:a0:ef rejected by device (Stat=0x51 Err=0x04) [ 896.438046] ata2.00: ACPI cmd 00/0c:00:00:00:a0:ef rejected by device (Stat=0x51 Err=0x04) [ 896.452446] ata2.00: configured for UDMA/33 [ 896.584040] ohci1394 0000:02:06.2: restoring config space at offset 0xf (was 0x4030100, writing 0x403010a) [ 896.584053] ohci1394 0000:02:06.2: restoring config space at offset 0x5 (was 0x0, writing 0xd0200000) [ 896.584058] ohci1394 0000:02:06.2: restoring config space at offset 0x4 (was 0x0, writing 0xd020a000) [ 896.584062] ohci1394 0000:02:06.2: restoring config space at offset 0x3 (was 0x800000, writing 0x804008) [ 896.584068] ohci1394 0000:02:06.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100116) [ 896.640693] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10] MMIO=[d020a000-d020a7ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 896.656042] tifm_7xx1 0000:02:06.3: restoring config space at offset 0xf (was 0x40701ff, writing 0x407010a) [ 896.656055] tifm_7xx1 0000:02:06.3: restoring config space at offset 0x4 (was 0x0, writing 0xd0206000) [ 896.656060] tifm_7xx1 0000:02:06.3: restoring config space at offset 0x3 (was 0x800000, writing 0x804008) [ 896.656065] tifm_7xx1 0000:02:06.3: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106) [ 896.656077] tifm_7xx1 0000:02:06.3: PCI INT A -> Link[LNKE] -> GSI 10 (level, low) -> IRQ 10 [ 896.662664] sd 0:0:0:0: [sda] Starting disk [ 897.087677] ata1.00: ACPI cmd 03/45:00:00:00:a0:ef rejected by device (Stat=0x51 Err=0x04) [ 897.091041] ata1.00: ACPI cmd 00/0c:00:00:00:a0:ef rejected by device (Stat=0x51 Err=0x04) [ 897.104474] ata1.00: configured for UDMA/100 [ 897.118877] sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors: (60.0 GB/55.8 GiB) [ 897.118896] sd 0:0:0:0: [sda] Write Protect is off [ 897.118898] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 897.118924] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 897.568039] usb 3-1: reset full speed USB device using uhci_hcd and address 2 [ 897.768977] PM: resume devices took 1.840 seconds [ 897.769197] PM: Finishing wakeup. [ 897.769199] Restarting tasks ... <6>synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume [ 897.853801] done. [ 897.964034] hub 2-0:1.0: over-current change on port 1 [ 898.068030] hub 2-0:1.0: over-current change on port 2 [ 899.119422] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume [ 900.000033] Corrupted low memory at c0007bb4 (7bb4 phys) = 5aa70286 [ 900.000074] Corrupted low memory at c0007bb8 (7bb8 phys) = 02860015 [ 900.000111] Corrupted low memory at c0007bbc (7bbc phys) = 00005aa7 [ 900.000148] Corrupted low memory at c0007bc4 (7bc4 phys) = 02465a8b [ 900.000184] Corrupted low memory at c0007bc8 (7bc8 phys) = 00008e8c [ 900.000221] Corrupted low memory at c0007bcc (7bcc phys) = 16800378 [ 900.000257] Corrupted low memory at c0007bd0 (7bd0 phys) = 1528a00e [ 900.000294] Corrupted low memory at c0007bd4 (7bd4 phys) = 00003961 [ 900.000330] Corrupted low memory at c0007bd8 (7bd8 phys) = 780325b8 [ 900.000367] Corrupted low memory at c0007bdc (7bdc phys) = 2c1e4ca3 [ 900.000403] Corrupted low memory at c0007be0 (7be0 phys) = 00007bf4 [ 900.000440] Corrupted low memory at c0007be4 (7be4 phys) = e04e1680 [ 900.000476] Corrupted low memory at c0007be8 (7be8 phys) = 00000378 [ 900.000513] Corrupted low memory at c0007bec (7bec phys) = 60001600 [ 900.000549] Corrupted low memory at c0007bf0 (7bf0 phys) = 0000020e [ 900.000586] Corrupted low memory at c0007bf8 (7bf8 phys) = 12821501 [ 900.000632] Corrupted low memory at c0007bfc (7bfc phys) = 0002f000 [ 900.000703] ------------[ cut here ]------------ [ 900.000706] WARNING: at /build/buildd/linux-2.6.28/arch/x86/kernel/setup.c:719 check_for_bios_corruption+0xc8/0xd0() [ 900.000709] Memory corruption detected in low memory [ 900.000753] Modules linked in: michael_mic arc4 ecb ieee80211_crypt_tkip binfmt_misc ppdev radeon drm bridge stp bnep input_polldev lp parport joydev pcmcia snd_intel8x0 snd_ac97_codec ac97_bus snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_dummy snd_seq_oss snd_seq_midi tifm_7xx1 yenta_socket rsrc_nonstatic ipw2200 snd_rawmidi iTCO_wdt tifm_core pcmcia_core ieee80211 ieee80211_crypt snd_seq_midi_event iTCO_vendor_support intel_agp snd_seq snd_timer snd_seq_device video shpchp agpgart pcspkr led_class psmouse serio_raw btusb output snd soundcore snd_page_alloc irda crc_ccitt ohci1394 ieee1394 b44 ssb mii fbcon tileblit font bitblit softcursor [ 900.000808] Pid: 4046, comm: vbetool Not tainted 2.6.28-11-generic #38-Ubuntu [ 900.000811] Call Trace: [ 900.000816] [] warn_slowpath+0x60/0x80 [ 900.000821] [] ? release_console_sem+0x1c9/0x200 [ 900.000826] [] ? _spin_lock+0x8/0x10 [ 900.000830] [] ? pit_next_event+0x31/0x40 [ 900.000835] [] ? clockevents_program_event+0x9a/0x150 [ 900.000838] [] ? printk+0x18/0x1a [ 900.000841] [] check_for_bios_corruption+0xc8/0xd0 [ 900.000845] [] periodic_check_for_corruption+0x8/0x30 [ 900.000849] [] run_timer_softirq+0x130/0x200 [ 900.000853] [] ? periodic_check_for_corruption+0x0/0x30 [ 900.000857] [] ? periodic_check_for_corruption+0x0/0x30 [ 900.000861] [] __do_softirq+0x97/0x170 [ 900.000864] [] do_softirq+0x5d/0x60 [ 900.000868] [] irq_exit+0x55/0x90 [ 900.000871] [] do_IRQ+0x83/0xa0 [ 900.000876] [] ? do_sys_vm86+0xeb/0x160 [ 900.000879] [] common_interrupt+0x23/0x30 [ 900.000883] [] syscall_call+0x7/0xb [ 900.000886] ---[ end trace 974db265a612ffa8 ]--- [ 912.154534] agpgart-intel 0000:00:00.0: AGP 2.0 bridge [ 912.154552] agpgart-intel 0000:00:00.0: putting AGP V2 device into 1x mode [ 912.154584] pci 0000:01:00.0: putting AGP V2 device into 1x mode [ 912.154611] [drm] Loading R300 Microcode [ 912.154653] [drm] Num pipes: 1 [ 917.256174] [drm] Num pipes: 1 [ 918.921315] agpgart-intel 0000:00:00.0: AGP 2.0 bridge [ 918.921334] agpgart-intel 0000:00:00.0: putting AGP V2 device into 1x mode [ 918.921365] pci 0000:01:00.0: putting AGP V2 device into 1x mode [ 918.921393] [drm] Loading R300 Microcode [ 918.921435] [drm] Num pipes: 1 [ 925.848164] [drm] Num pipes: 1 [ 927.517162] agpgart-intel 0000:00:00.0: AGP 2.0 bridge [ 927.517181] agpgart-intel 0000:00:00.0: putting AGP V2 device into 1x mode [ 927.517213] pci 0000:01:00.0: putting AGP V2 device into 1x mode [ 927.517241] [drm] Loading R300 Microcode [ 927.517283] [drm] Num pipes: 1 [ 932.000160] [drm] Num pipes: 1