Dumping 84 device(s) from the Global Device List:
-------------------------------------------------
udi = '/org/freedesktop/Hal/devices/computer'
  info.addons = {'hald-addon-cpufreq', 'hald-addon-acpi'} (string list)
  info.bus = 'unknown'  (string)
  info.callouts.add = {'hal-storage-cleanup-all-mountpoints'} (string list)
  info.interfaces = {'org.freedesktop.Hal.Device.SystemPowerManagement'} (string list)
  info.product = 'Computer'  (string)
  info.subsystem = 'unknown'  (string)
  info.udi = '/org/freedesktop/Hal/devices/computer'  (string)
  org.freedesktop.Hal.Device.SystemPowerManagement.method_argnames = {'num_seconds_to_sleep', 'num_seconds_to_sleep', '', '', '', 'enable_power_save'} (string list)
  org.freedesktop.Hal.Device.SystemPowerManagement.method_execpaths = {'hal-system-power-suspend', 'hal-system-power-suspend-hybrid', 'hal-system-power-hibernate', 'hal-system-power-shutdown', 'hal-system-power-reboot', 'hal-system-power-set-power-save'} (string list)
  org.freedesktop.Hal.Device.SystemPowerManagement.method_names = {'Suspend', 'SuspendHybrid', 'Hibernate', 'Shutdown', 'Reboot', 'SetPowerSave'} (string list)
  org.freedesktop.Hal.Device.SystemPowerManagement.method_signatures = {'i', 'i', '', '', '', 'i'} (string list)
  power_management.acpi.linux.version = '20060707'  (string)
  power_management.can_hibernate = true  (bool)
  power_management.can_suspend = false  (bool)
  power_management.can_suspend_hybrid = false  (bool)
  power_management.can_suspend_to_disk = true  (bool)
  power_management.can_suspend_to_ram = false  (bool)
  power_management.is_powersave_set = false  (bool)
  power_management.type = 'acpi'  (string)
  smbios.bios.release_date = '06/16/2005'  (string)
  smbios.bios.vendor = 'IBM'  (string)
  smbios.bios.version = '-[KEE134AUS-1.34]-'  (string)
  smbios.chassis.manufacturer = 'IBM'  (string)
  smbios.chassis.type = 'Other'  (string)
  smbios.system.manufacturer = 'IBM CORPORATION'  (string)
  smbios.system.product = '-[84872NY]-'  (string)
  smbios.system.serial = 'KDWPB84'  (string)
  smbios.system.uuid = '9FABD67C-06B7-3662-9766-A3FC0EEE7CAC'  (string)
  smbios.system.version = 'IBM CORPORATION'  (string)
  system.chassis.manufacturer = 'IBM'  (string)
  system.chassis.type = 'Other'  (string)
  system.firmware.release_date = '06/16/2005'  (string)
  system.firmware.vendor = 'IBM'  (string)
  system.firmware.version = '-[KEE134AUS-1.34]-'  (string)
  system.formfactor = 'unknown'  (string)
  system.hardware.product = '-[84872NY]-'  (string)
  system.hardware.serial = 'KDWPB84'  (string)
  system.hardware.uuid = '9FABD67C-06B7-3662-9766-A3FC0EEE7CAC'  (string)
  system.hardware.vendor = 'IBM CORPORATION'  (string)
  system.hardware.version = 'IBM CORPORATION'  (string)
  system.kernel.machine = 'i686'  (string)
  system.kernel.name = 'Linux'  (string)
  system.kernel.version = '2.6.20-16-generic'  (string)
  system.product = '-[84872NY]- IBM CORPORATION'  (string)
  system.vendor = 'IBM CORPORATION'  (string)

udi = '/org/freedesktop/Hal/devices/acpi_CPU0'
  info.capabilities = {'processor'} (string list)
  info.category = 'processor'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Intel(R) Pentium(R) 4 CPU 3.00GHz'  (string)
  info.udi = '/org/freedesktop/Hal/devices/acpi_CPU0'  (string)
  linux.acpi_path = '/proc/acpi/processor/CPU0'  (string)
  linux.acpi_type = 1  (0x1)  (int)
  linux.hotplug_type = 4  (0x4)  (int)
  processor.can_throttle = true  (bool)
  processor.number = 0  (0x0)  (int)

udi = '/org/freedesktop/Hal/devices/acpi_CPU1'
  info.capabilities = {'processor'} (string list)
  info.category = 'processor'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Intel(R) Pentium(R) 4 CPU 3.00GHz'  (string)
  info.udi = '/org/freedesktop/Hal/devices/acpi_CPU1'  (string)
  linux.acpi_path = '/proc/acpi/processor/CPU1'  (string)
  linux.acpi_type = 1  (0x1)  (int)
  linux.hotplug_type = 4  (0x4)  (int)
  processor.can_throttle = true  (bool)
  processor.number = 1  (0x1)  (int)

udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_2'
  info.addons = {'hald-addon-keyboard'} (string list)
  info.capabilities = {'input', 'input.keyboard', 'button'} (string list)
  info.category = 'input'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = '/usr/sbin/thinkpad-keys'  (string)
  info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_2'  (string)
  input.device = '/dev/input/event5'  (string)
  input.product = '/usr/sbin/thinkpad-keys'  (string)
  linux.device_file = '/dev/input/event5'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'input'  (string)
  linux.sysfs_path = '/sys/class/input/input5/event5'  (string)

udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_1'
  button.has_state = false  (bool)
  button.type = 'power'  (string)
  info.addons = {'hald-addon-keyboard'} (string list)
  info.capabilities = {'input', 'button'} (string list)
  info.category = 'input'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Power Button (CM)'  (string)
  info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_1'  (string)
  input.device = '/dev/input/event4'  (string)
  input.product = 'Power Button (CM)'  (string)
  linux.device_file = '/dev/input/event4'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'input'  (string)
  linux.sysfs_path = '/sys/class/input/input4/event4'  (string)

udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_0'
  button.has_state = false  (bool)
  button.type = 'power'  (string)
  info.addons = {'hald-addon-keyboard'} (string list)
  info.capabilities = {'input', 'button'} (string list)
  info.category = 'input'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Power Button (FF)'  (string)
  info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_0'  (string)
  input.device = '/dev/input/event3'  (string)
  input.product = 'Power Button (FF)'  (string)
  linux.device_file = '/dev/input/event3'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'input'  (string)
  linux.sysfs_path = '/sys/class/input/input3/event3'  (string)

udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input'
  info.capabilities = {'input', 'input.mouse'} (string list)
  info.category = 'input'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Macintosh mouse button emulation'  (string)
  info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input'  (string)
  input.device = '/dev/input/event0'  (string)
  input.product = 'Macintosh mouse button emulation'  (string)
  linux.device_file = '/dev/input/event0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'input'  (string)
  linux.sysfs_path = '/sys/class/input/input0/event0'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0401'
  info.bus = 'pnp'  (string)
  info.linux.driver = 'parport_pc'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'ECP printer port'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0401'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:0d'  (string)
  pnp.description = 'ECP printer port'  (string)
  pnp.id = 'PNP0401'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0f13'
  info.bus = 'pnp'  (string)
  info.linux.driver = 'i8042 aux'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'PS/2 Port for PS/2-style Mice'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0f13'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:0c'  (string)
  pnp.description = 'PS/2 Port for PS/2-style Mice'  (string)
  pnp.id = 'PNP0f13'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0303'
  info.bus = 'pnp'  (string)
  info.linux.driver = 'i8042 kbd'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'IBM Enhanced (101/102-key, PS/2 mouse support)'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0303'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:0b'  (string)
  pnp.description = 'IBM Enhanced (101/102-key, PS/2 mouse support)'  (string)
  pnp.id = 'PNP0303'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0501_0'
  info.bus = 'pnp'  (string)
  info.linux.driver = 'serial'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = '16550A-compatible COM port'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0501_0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:0a'  (string)
  pnp.description = '16550A-compatible COM port'  (string)
  pnp.id = 'PNP0501'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0501_0_serial_platform_1'
  info.capabilities = {'serial'} (string list)
  info.category = 'serial'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pnp_PNP0501_0'  (string)
  info.product = '16550A-compatible COM port'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0501_0_serial_platform_1'  (string)
  linux.device_file = '/dev/ttyS1'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'tty'  (string)
  linux.sysfs_path = '/sys/class/tty/ttyS1'  (string)
  serial.device = '/dev/ttyS1'  (string)
  serial.originating_device = '/org/freedesktop/Hal/devices/pnp_PNP0501_0'  (string)
  serial.physical_device = '/org/freedesktop/Hal/devices/pnp_PNP0501_0'  (string)
  serial.port = 1  (0x1)  (int)
  serial.type = 'platform'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0501'
  info.bus = 'pnp'  (string)
  info.linux.driver = 'serial'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = '16550A-compatible COM port'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0501'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:09'  (string)
  pnp.description = '16550A-compatible COM port'  (string)
  pnp.id = 'PNP0501'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0501_serial_platform_0'
  info.capabilities = {'serial'} (string list)
  info.category = 'serial'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pnp_PNP0501'  (string)
  info.product = '16550A-compatible COM port'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0501_serial_platform_0'  (string)
  linux.device_file = '/dev/ttyS0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'tty'  (string)
  linux.sysfs_path = '/sys/class/tty/ttyS0'  (string)
  serial.device = '/dev/ttyS0'  (string)
  serial.originating_device = '/org/freedesktop/Hal/devices/pnp_PNP0501'  (string)
  serial.physical_device = '/org/freedesktop/Hal/devices/pnp_PNP0501'  (string)
  serial.port = 0  (0x0)  (int)
  serial.type = 'platform'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0700'
  info.bus = 'pnp'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'PC standard floppy disk controller'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0700'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:08'  (string)
  pnp.description = 'PC standard floppy disk controller'  (string)
  pnp.id = 'PNP0700'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_IBM37d7'
  info.bus = 'pnp'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'PnP Device (IBM37d7)'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_IBM37d7'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:07'  (string)
  pnp.id = 'IBM37d7'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_INT0800'
  info.bus = 'pnp'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'PnP Device (INT0800)'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_INT0800'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:06'  (string)
  pnp.id = 'INT0800'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0800'
  info.bus = 'pnp'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'AT-style speaker sound'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0800'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:05'  (string)
  pnp.description = 'AT-style speaker sound'  (string)
  pnp.id = 'PNP0800'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00'
  info.bus = 'pnp'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'AT Real-Time Clock'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:04'  (string)
  pnp.description = 'AT Real-Time Clock'  (string)
  pnp.id = 'PNP0b00'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04'
  info.bus = 'pnp'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Math Coprocessor'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:03'  (string)
  pnp.description = 'Math Coprocessor'  (string)
  pnp.id = 'PNP0c04'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0200'
  info.bus = 'pnp'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'AT DMA Controller'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0200'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:02'  (string)
  pnp.description = 'AT DMA Controller'  (string)
  pnp.id = 'PNP0200'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02'
  info.bus = 'pnp'  (string)
  info.linux.driver = 'system'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:01'  (string)
  pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'  (string)
  pnp.id = 'PNP0c02'  (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0a03'
  info.bus = 'pnp'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'PCI Bus'  (string)
  info.subsystem = 'pnp'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0a03'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pnp'  (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:00'  (string)
  pnp.description = 'PCI Bus'  (string)
  pnp.id = 'PNP0a03'  (string)

udi = '/org/freedesktop/Hal/devices/platform_vesafb_0'
  info.bus = 'platform'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Platform Device (vesafb.0)'  (string)
  info.subsystem = 'platform'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_vesafb_0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'platform'  (string)
  linux.sysfs_path = '/sys/devices/platform/vesafb.0'  (string)
  platform.id = 'vesafb.0'  (string)

udi = '/org/freedesktop/Hal/devices/platform_serial8250'
  info.bus = 'platform'  (string)
  info.linux.driver = 'serial8250'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Platform Device (serial8250)'  (string)
  info.subsystem = 'platform'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_serial8250'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'platform'  (string)
  linux.sysfs_path = '/sys/devices/platform/serial8250'  (string)
  platform.id = 'serial8250'  (string)

udi = '/org/freedesktop/Hal/devices/platform_pcspkr'
  info.bus = 'platform'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Platform Device (pcspkr)'  (string)
  info.subsystem = 'platform'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_pcspkr'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'platform'  (string)
  linux.sysfs_path = '/sys/devices/platform/pcspkr'  (string)
  platform.id = 'pcspkr'  (string)

udi = '/org/freedesktop/Hal/devices/platform_iTCO_wdt'
  info.bus = 'platform'  (string)
  info.linux.driver = 'iTCO_wdt'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Platform Device (iTCO_wdt)'  (string)
  info.subsystem = 'platform'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_iTCO_wdt'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'platform'  (string)
  linux.sysfs_path = '/sys/devices/platform/iTCO_wdt'  (string)
  platform.id = 'iTCO_wdt'  (string)

udi = '/org/freedesktop/Hal/devices/platform_i8042'
  info.bus = 'platform'  (string)
  info.linux.driver = 'i8042'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Platform Device (i8042)'  (string)
  info.subsystem = 'platform'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_i8042'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'platform'  (string)
  linux.sysfs_path = '/sys/devices/platform/i8042'  (string)
  platform.id = 'i8042'  (string)

udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port'
  info.bus = 'serio'  (string)
  info.linux.driver = 'psmouse'  (string)
  info.parent = '/org/freedesktop/Hal/devices/platform_i8042'  (string)
  info.product = 'i8042 AUX port'  (string)
  info.subsystem = 'serio'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'serio'  (string)
  linux.sysfs_path = '/sys/devices/platform/i8042/serio1'  (string)
  serio.description = 'i8042 AUX port'  (string)
  serio.id = 'serio1'  (string)

udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port_logicaldev_input'
  info.capabilities = {'input', 'input.mouse'} (string list)
  info.category = 'input'  (string)
  info.parent = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port'  (string)
  info.product = 'ImPS/2 Logitech Wheel Mouse'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port_logicaldev_input'  (string)
  input.device = '/dev/input/event2'  (string)
  input.originating_device = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port'  (string)
  input.physical_device = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port'  (string)
  input.product = 'ImPS/2 Logitech Wheel Mouse'  (string)
  linux.device_file = '/dev/input/event2'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'input'  (string)
  linux.sysfs_path = '/sys/class/input/input2/event2'  (string)

udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port'
  info.bus = 'serio'  (string)
  info.linux.driver = 'atkbd'  (string)
  info.parent = '/org/freedesktop/Hal/devices/platform_i8042'  (string)
  info.product = 'i8042 KBD port'  (string)
  info.subsystem = 'serio'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'serio'  (string)
  linux.sysfs_path = '/sys/devices/platform/i8042/serio0'  (string)
  serio.description = 'i8042 KBD port'  (string)
  serio.id = 'serio0'  (string)

udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port_logicaldev_input'
  info.addons = {'hald-addon-keyboard'} (string list)
  info.capabilities = {'input', 'input.keyboard', 'button'} (string list)
  info.category = 'input'  (string)
  info.parent = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port'  (string)
  info.product = 'AT Translated Set 2 keyboard'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port_logicaldev_input'  (string)
  input.device = '/dev/input/event1'  (string)
  input.originating_device = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port'  (string)
  input.physical_device = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port'  (string)
  input.product = 'AT Translated Set 2 keyboard'  (string)
  linux.device_file = '/dev/input/event1'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'input'  (string)
  linux.sysfs_path = '/sys/class/input/input1/event1'  (string)

udi = '/org/freedesktop/Hal/devices/platform_floppy_0'
  info.bus = 'platform'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Platform Device (floppy.0)'  (string)
  info.subsystem = 'platform'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_floppy_0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'platform'  (string)
  linux.sysfs_path = '/sys/devices/platform/floppy.0'  (string)
  platform.id = 'floppy.0'  (string)

udi = '/org/freedesktop/Hal/devices/platform_floppy_0_storage'
  block.device = '/dev/fd0'  (string)
  block.is_volume = false  (bool)
  block.major = 2  (0x2)  (int)
  block.minor = 0  (0x0)  (int)
  block.storage_device = '/org/freedesktop/Hal/devices/platform_floppy_0_storage'  (string)
  info.capabilities = {'storage', 'block'} (string list)
  info.category = 'storage'  (string)
  info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
  info.parent = '/org/freedesktop/Hal/devices/platform_floppy_0'  (string)
  info.product = 'PC Floppy Drive'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_floppy_0_storage'  (string)
  info.vendor = ''  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  linux.sysfs_path = '/sys/block/fd0'  (string)
  org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list)
  org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list)
  org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list)
  org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
  storage.automount_enabled_hint = true  (bool)
  storage.bus = 'platform'  (string)
  storage.drive_type = 'floppy'  (string)
  storage.hotpluggable = false  (bool)
  storage.media_check_enabled = false  (bool)
  storage.model = ''  (string)
  storage.no_partitions_hint = true  (bool)
  storage.originating_device = '/org/freedesktop/Hal/devices/platform_floppy_0'  (string)
  storage.physical_device = '/org/freedesktop/Hal/devices/platform_floppy_0'  (string)
  storage.removable = true  (bool)
  storage.removable.media_available = false  (bool)
  storage.requires_eject = false  (bool)
  storage.size = 0  (0x0)  (uint64)
  storage.vendor = 'PC Floppy Drive'  (string)
  volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'utf8', 'shortname=', 'codepage=', 'iocharset=', 'umask=', 'uid='} (string list)

udi = '/org/freedesktop/Hal/devices/platform_eisa_0'
  info.bus = 'platform'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Platform Device (eisa.0)'  (string)
  info.subsystem = 'platform'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_eisa_0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'platform'  (string)
  linux.sysfs_path = '/sys/devices/platform/eisa.0'  (string)
  platform.id = 'eisa.0'  (string)

udi = '/org/freedesktop/Hal/devices/platform_bluetooth'
  info.bus = 'platform'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Platform Device (bluetooth)'  (string)
  info.subsystem = 'platform'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_bluetooth'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'platform'  (string)
  linux.sysfs_path = '/sys/devices/platform/bluetooth'  (string)
  platform.id = 'bluetooth'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_25a4'
  info.bus = 'pci'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = '6300ESB SMBus Controller'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_25a4'  (string)
  info.vendor = 'Intel Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.3'  (string)
  pci.device_class = 12  (0xc)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 5  (0x5)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.3'  (string)
  pci.product = '6300ESB SMBus Controller'  (string)
  pci.product_id = 9636  (0x25a4)  (int)
  pci.subsys_product_id = 685  (0x2ad)  (int)
  pci.subsys_vendor = 'IBM'  (string)
  pci.subsys_vendor_id = 4116  (0x1014)  (int)
  pci.vendor = 'Intel Corporation'  (string)
  pci.vendor_id = 32902  (0x8086)  (int)

udi = '/org/freedesktop/Hal/devices/pci_8086_25a3'
  info.bus = 'pci'  (string)
  info.linux.driver = 'ata_piix'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = '6300ESB SATA Storage Controller'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_25a3'  (string)
  info.vendor = 'Intel Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2'  (string)
  pci.device_class = 1  (0x1)  (int)
  pci.device_protocol = 138  (0x8a)  (int)
  pci.device_subclass = 1  (0x1)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2'  (string)
  pci.product = '6300ESB SATA Storage Controller'  (string)
  pci.product_id = 9635  (0x25a3)  (int)
  pci.subsys_product_id = 685  (0x2ad)  (int)
  pci.subsys_vendor = 'IBM'  (string)
  pci.subsys_vendor_id = 4116  (0x1014)  (int)
  pci.vendor = 'Intel Corporation'  (string)
  pci.vendor_id = 32902  (0x8086)  (int)

udi = '/org/freedesktop/Hal/devices/pci_8086_25a3_scsi_host_0'
  info.capabilities = {'scsi_host'} (string list)
  info.category = 'scsi_host'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_25a3'  (string)
  info.product = 'SCSI Host Adapter'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_25a3_scsi_host_0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi_host'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host1'  (string)
  scsi_host.host = 1  (0x1)  (int)

udi = '/org/freedesktop/Hal/devices/pci_8086_25a3_scsi_host_0_scsi_device_lun0_0'
  info.bus = 'scsi'  (string)
  info.linux.driver = 'sd'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_25a3_scsi_host_0'  (string)
  info.product = 'SCSI Device'  (string)
  info.subsystem = 'scsi'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_25a3_scsi_host_0_scsi_device_lun0_0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host1/target1:0:1/1:0:1:0'  (string)
  scsi.bus = 0  (0x0)  (int)
  scsi.host = 1  (0x1)  (int)
  scsi.lun = 0  (0x0)  (int)
  scsi.model = 'Maxtor 6Y160M0'  (string)
  scsi.target = 1  (0x1)  (int)
  scsi.type = 'disk'  (string)
  scsi.vendor = 'ATA'  (string)

udi = '/org/freedesktop/Hal/devices/storage_serial_1ATA_Maxtor_6Y160M0_Y4DD9BNE'
  block.device = '/dev/sdb'  (string)
  block.is_volume = false  (bool)
  block.major = 8  (0x8)  (int)
  block.minor = 16  (0x10)  (int)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_1ATA_Maxtor_6Y160M0_Y4DD9BNE'  (string)
  info.capabilities = {'storage', 'block'} (string list)
  info.category = 'storage'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_25a3_scsi_host_0_scsi_device_lun0_0'  (string)
  info.product = 'Maxtor 6Y160M0'  (string)
  info.udi = '/org/freedesktop/Hal/devices/storage_serial_1ATA_Maxtor_6Y160M0_Y4DD9BNE'  (string)
  info.vendor = 'ATA'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  linux.sysfs_path = '/sys/block/sdb'  (string)
  storage.automount_enabled_hint = true  (bool)
  storage.bus = 'scsi'  (string)
  storage.drive_type = 'disk'  (string)
  storage.firmware_version = 'YAR5'  (string)
  storage.hotpluggable = false  (bool)
  storage.lun = 0  (0x0)  (int)
  storage.media_check_enabled = false  (bool)
  storage.model = 'Maxtor 6Y160M0'  (string)
  storage.no_partitions_hint = false  (bool)
  storage.originating_device = '/org/freedesktop/Hal/devices/pci_8086_25a3_scsi_host_0_scsi_device_lun0_0'  (string)
  storage.partitioning_scheme = 'none'  (string)
  storage.physical_device = '/org/freedesktop/Hal/devices/pci_8086_25a3_scsi_host_0_scsi_device_lun0_0'  (string)
  storage.removable = false  (bool)
  storage.removable.media_available = true  (bool)
  storage.removable.media_size = 160041885696  (0x25433d6000)  (uint64)
  storage.requires_eject = false  (bool)
  storage.serial = '1ATA_Maxtor_6Y160M0_Y4DD9BNE'  (string)
  storage.size = 160041885696  (0x25433d6000)  (uint64)
  storage.vendor = 'ATA'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_25a3_scsi_host_0_scsi_device_lun0_0_scsi_generic'
  info.capabilities = {'scsi_generic'} (string list)
  info.category = 'scsi_generic'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_25a3_scsi_host_0_scsi_device_lun0_0'  (string)
  info.product = 'SCSI Generic Interface'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_25a3_scsi_host_0_scsi_device_lun0_0_scsi_generic'  (string)
  linux.device_file = '/dev/sg2'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi_generic'  (string)
  linux.sysfs_path = '/sys/class/scsi_generic/sg2'  (string)
  scsi_generic.device = '/dev/sg2'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_25a3_scsi_host_0_scsi_device_lun0'
  info.bus = 'scsi'  (string)
  info.linux.driver = 'sd'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_25a3_scsi_host_0'  (string)
  info.product = 'SCSI Device'  (string)
  info.subsystem = 'scsi'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_25a3_scsi_host_0_scsi_device_lun0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0'  (string)
  scsi.bus = 0  (0x0)  (int)
  scsi.host = 1  (0x1)  (int)
  scsi.lun = 0  (0x0)  (int)
  scsi.model = 'WDC WD1600JS-23M'  (string)
  scsi.target = 0  (0x0)  (int)
  scsi.type = 'disk'  (string)
  scsi.vendor = 'ATA'  (string)

udi = '/org/freedesktop/Hal/devices/storage_serial_1ATA_WDC_WD1600JS_23MHB0_WD_WCANM2384553'
  block.device = '/dev/sda'  (string)
  block.is_volume = false  (bool)
  block.major = 8  (0x8)  (int)
  block.minor = 0  (0x0)  (int)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_1ATA_WDC_WD1600JS_23MHB0_WD_WCANM2384553'  (string)
  info.capabilities = {'storage', 'block'} (string list)
  info.category = 'storage'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_25a3_scsi_host_0_scsi_device_lun0'  (string)
  info.product = 'WDC WD1600JS-23M'  (string)
  info.udi = '/org/freedesktop/Hal/devices/storage_serial_1ATA_WDC_WD1600JS_23MHB0_WD_WCANM2384553'  (string)
  info.vendor = 'ATA'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  linux.sysfs_path = '/sys/block/sda'  (string)
  storage.automount_enabled_hint = true  (bool)
  storage.bus = 'scsi'  (string)
  storage.drive_type = 'disk'  (string)
  storage.firmware_version = '03.0'  (string)
  storage.hotpluggable = false  (bool)
  storage.lun = 0  (0x0)  (int)
  storage.media_check_enabled = false  (bool)
  storage.model = 'WDC WD1600JS-23M'  (string)
  storage.no_partitions_hint = false  (bool)
  storage.originating_device = '/org/freedesktop/Hal/devices/pci_8086_25a3_scsi_host_0_scsi_device_lun0'  (string)
  storage.partitioning_scheme = 'mbr'  (string)
  storage.physical_device = '/org/freedesktop/Hal/devices/pci_8086_25a3_scsi_host_0_scsi_device_lun0'  (string)
  storage.removable = false  (bool)
  storage.removable.media_available = true  (bool)
  storage.removable.media_size = 160041885696  (0x25433d6000)  (uint64)
  storage.requires_eject = false  (bool)
  storage.serial = '1ATA_WDC_WD1600JS-23MHB0_WD-WCANM2384553'  (string)
  storage.size = 160041885696  (0x25433d6000)  (uint64)
  storage.vendor = 'ATA'  (string)

udi = '/org/freedesktop/Hal/devices/volume_uuid_4f3f83f9_29a1_4ac6_a31f_ce52e1f36fc6'
  block.device = '/dev/sda9'  (string)
  block.is_volume = true  (bool)
  block.major = 8  (0x8)  (int)
  block.minor = 9  (0x9)  (int)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_1ATA_WDC_WD1600JS_23MHB0_WD_WCANM2384553'  (string)
  info.capabilities = {'volume', 'block'} (string list)
  info.category = 'volume'  (string)
  info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
  info.parent = '/org/freedesktop/Hal/devices/storage_serial_1ATA_WDC_WD1600JS_23MHB0_WD_WCANM2384553'  (string)
  info.product = 'Volume (ext3)'  (string)
  info.udi = '/org/freedesktop/Hal/devices/volume_uuid_4f3f83f9_29a1_4ac6_a31f_ce52e1f36fc6'  (string)
  linux.fstab.mountpoint = '/scratch'  (string)
  linux.fstab.options = 'noatime'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  linux.sysfs_path = '/sys/block/sda/sda9'  (string)
  org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list)
  org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list)
  org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list)
  org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
  storage.model = ''  (string)
  volume.block_size = 512  (0x200)  (int)
  volume.fstype = 'ext3'  (string)
  volume.fsusage = 'filesystem'  (string)
  volume.fsversion = '1.0'  (string)
  volume.ignore = true  (bool)
  volume.is_disc = false  (bool)
  volume.is_mounted = true  (bool)
  volume.is_mounted_read_only = false  (bool)
  volume.is_partition = true  (bool)
  volume.label = ''  (string)
  volume.linux.is_device_mapper = false  (bool)
  volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'acl', 'user_xattr', 'data='} (string list)
  volume.mount_point = '/scratch'  (string)
  volume.num_blocks = 39070017  (0x2542941)  (int)
  volume.partition.media_size = 160041885696  (0x25433d6000)  (uint64)
  volume.partition.number = 9  (0x9)  (int)
  volume.partition.start = 77062680576  (0x11f14b3000)  (uint64)
  volume.size = 20003848704  (0x4a8528200)  (uint64)
  volume.unmount.valid_options = {'lazy'} (string list)
  volume.uuid = '4f3f83f9-29a1-4ac6-a31f-ce52e1f36fc6'  (string)

udi = '/org/freedesktop/Hal/devices/volume_uuid_419841b6_ddc9_4086_bf26_c90dd93656bd'
  block.device = '/dev/sda8'  (string)
  block.is_volume = true  (bool)
  block.major = 8  (0x8)  (int)
  block.minor = 8  (0x8)  (int)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_1ATA_WDC_WD1600JS_23MHB0_WD_WCANM2384553'  (string)
  info.capabilities = {'volume', 'block'} (string list)
  info.category = 'volume'  (string)
  info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
  info.parent = '/org/freedesktop/Hal/devices/storage_serial_1ATA_WDC_WD1600JS_23MHB0_WD_WCANM2384553'  (string)
  info.product = 'Volume (ext3)'  (string)
  info.udi = '/org/freedesktop/Hal/devices/volume_uuid_419841b6_ddc9_4086_bf26_c90dd93656bd'  (string)
  linux.fstab.mountpoint = '/home'  (string)
  linux.fstab.options = 'noatime'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  linux.sysfs_path = '/sys/block/sda/sda8'  (string)
  org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list)
  org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list)
  org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list)
  org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
  storage.model = ''  (string)
  volume.block_size = 512  (0x200)  (int)
  volume.fstype = 'ext3'  (string)
  volume.fsusage = 'filesystem'  (string)
  volume.fsversion = '1.0'  (string)
  volume.ignore = true  (bool)
  volume.is_disc = false  (bool)
  volume.is_mounted = true  (bool)
  volume.is_mounted_read_only = false  (bool)
  volume.is_partition = true  (bool)
  volume.label = ''  (string)
  volume.linux.is_device_mapper = false  (bool)
  volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'acl', 'user_xattr', 'data='} (string list)
  volume.mount_point = '/home'  (string)
  volume.num_blocks = 7807527  (0x772227)  (int)
  volume.partition.media_size = 160041885696  (0x25433d6000)  (uint64)
  volume.partition.number = 8  (0x8)  (int)
  volume.partition.start = 73065194496  (0x1103066400)  (uint64)
  volume.size = 3997453824  (0xee444e00)  (uint64)
  volume.unmount.valid_options = {'lazy'} (string list)
  volume.uuid = '419841b6-ddc9-4086-bf26-c90dd93656bd'  (string)

udi = '/org/freedesktop/Hal/devices/volume_uuid_d13eb85c_29db_43c7_b35b_1494c067a959'
  block.device = '/dev/sda7'  (string)
  block.is_volume = true  (bool)
  block.major = 8  (0x8)  (int)
  block.minor = 7  (0x7)  (int)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_1ATA_WDC_WD1600JS_23MHB0_WD_WCANM2384553'  (string)
  info.capabilities = {'volume', 'block'} (string list)
  info.category = 'volume'  (string)
  info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
  info.parent = '/org/freedesktop/Hal/devices/storage_serial_1ATA_WDC_WD1600JS_23MHB0_WD_WCANM2384553'  (string)
  info.product = 'Volume (ext3)'  (string)
  info.udi = '/org/freedesktop/Hal/devices/volume_uuid_d13eb85c_29db_43c7_b35b_1494c067a959'  (string)
  linux.fstab.mountpoint = '/'  (string)
  linux.fstab.options = 'noatime,errors=remount-ro'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  linux.sysfs_path = '/sys/block/sda/sda7'  (string)
  org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list)
  org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list)
  org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list)
  org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
  storage.model = ''  (string)
  volume.block_size = 512  (0x200)  (int)
  volume.fstype = 'ext3'  (string)
  volume.fsusage = 'filesystem'  (string)
  volume.fsversion = '1.0'  (string)
  volume.ignore = true  (bool)
  volume.is_disc = false  (bool)
  volume.is_mounted = true  (bool)
  volume.is_mounted_read_only = false  (bool)
  volume.is_partition = true  (bool)
  volume.label = ''  (string)
  volume.linux.is_device_mapper = false  (bool)
  volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'acl', 'user_xattr', 'data='} (string list)
  volume.mount_point = '/'  (string)
  volume.num_blocks = 15631182  (0xee834e)  (int)
  volume.partition.media_size = 160041885696  (0x25433d6000)  (uint64)
  volume.partition.number = 7  (0x7)  (int)
  volume.partition.start = 65061997056  (0xf25ff4a00)  (uint64)
  volume.size = 8003165184  (0x1dd069c00)  (uint64)
  volume.unmount.valid_options = {'lazy'} (string list)
  volume.uuid = 'd13eb85c-29db-43c7-b35b-1494c067a959'  (string)

udi = '/org/freedesktop/Hal/devices/volume_uuid_6ad2489e_6fd8_461a_95a5_1f6a045801a6'
  block.device = '/dev/sda6'  (string)
  block.is_volume = true  (bool)
  block.major = 8  (0x8)  (int)
  block.minor = 6  (0x6)  (int)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_1ATA_WDC_WD1600JS_23MHB0_WD_WCANM2384553'  (string)
  info.capabilities = {'volume', 'block'} (string list)
  info.category = 'volume'  (string)
  info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
  info.parent = '/org/freedesktop/Hal/devices/storage_serial_1ATA_WDC_WD1600JS_23MHB0_WD_WCANM2384553'  (string)
  info.product = 'Volume (ext3)'  (string)
  info.udi = '/org/freedesktop/Hal/devices/volume_uuid_6ad2489e_6fd8_461a_95a5_1f6a045801a6'  (string)
  linux.fstab.mountpoint = '/boot'  (string)
  linux.fstab.options = 'noatime'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  linux.sysfs_path = '/sys/block/sda/sda6'  (string)
  org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list)
  org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list)
  org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list)
  org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
  storage.model = ''  (string)
  volume.block_size = 512  (0x200)  (int)
  volume.fstype = 'ext3'  (string)
  volume.fsusage = 'filesystem'  (string)
  volume.fsversion = '1.0'  (string)
  volume.ignore = true  (bool)
  volume.is_disc = false  (bool)
  volume.is_mounted = true  (bool)
  volume.is_mounted_read_only = false  (bool)
  volume.is_partition = true  (bool)
  volume.label = ''  (string)
  volume.linux.is_device_mapper = false  (bool)
  volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'acl', 'user_xattr', 'data='} (string list)
  volume.mount_point = '/boot'  (string)
  volume.num_blocks = 192717  (0x2f0cd)  (int)
  volume.partition.media_size = 160041885696  (0x25433d6000)  (uint64)
  volume.partition.number = 6  (0x6)  (int)
  volume.partition.start = 64963293696  (0xf201d3200)  (uint64)
  volume.size = 98671104  (0x5e19a00)  (uint64)
  volume.unmount.valid_options = {'lazy'} (string list)
  volume.uuid = '6ad2489e-6fd8-461a-95a5-1f6a045801a6'  (string)

udi = '/org/freedesktop/Hal/devices/volume_uuid_63c00349_0af0_4275_826d_4c7db9d7d443'
  block.device = '/dev/sda5'  (string)
  block.is_volume = true  (bool)
  block.major = 8  (0x8)  (int)
  block.minor = 5  (0x5)  (int)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_1ATA_WDC_WD1600JS_23MHB0_WD_WCANM2384553'  (string)
  info.capabilities = {'volume', 'block'} (string list)
  info.category = 'volume'  (string)
  info.parent = '/org/freedesktop/Hal/devices/storage_serial_1ATA_WDC_WD1600JS_23MHB0_WD_WCANM2384553'  (string)
  info.product = 'Volume (swap)'  (string)
  info.udi = '/org/freedesktop/Hal/devices/volume_uuid_63c00349_0af0_4275_826d_4c7db9d7d443'  (string)
  linux.fstab.mountpoint = 'none'  (string)
  linux.fstab.options = 'sw'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  linux.sysfs_path = '/sys/block/sda/sda5'  (string)
  storage.model = ''  (string)
  volume.block_size = 512  (0x200)  (int)
  volume.fstype = 'swap'  (string)
  volume.fsusage = 'other'  (string)
  volume.fsversion = '2'  (string)
  volume.is_disc = false  (bool)
  volume.is_mounted = false  (bool)
  volume.is_mounted_read_only = false  (bool)
  volume.is_partition = true  (bool)
  volume.label = ''  (string)
  volume.linux.is_device_mapper = false  (bool)
  volume.mount_point = ''  (string)
  volume.num_blocks = 4000122  (0x3d097a)  (int)
  volume.partition.media_size = 160041885696  (0x25433d6000)  (uint64)
  volume.partition.number = 5  (0x5)  (int)
  volume.partition.start = 62915198976  (0xea609c000)  (uint64)
  volume.size = 2048062464  (0x7a12f400)  (uint64)
  volume.uuid = '63c00349-0af0-4275-826d-4c7db9d7d443'  (string)

udi = '/org/freedesktop/Hal/devices/volume_part2_size_1024'
  block.device = '/dev/sda2'  (string)
  block.is_volume = true  (bool)
  block.major = 8  (0x8)  (int)
  block.minor = 2  (0x2)  (int)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_1ATA_WDC_WD1600JS_23MHB0_WD_WCANM2384553'  (string)
  info.capabilities = {'volume', 'block'} (string list)
  info.category = 'volume'  (string)
  info.parent = '/org/freedesktop/Hal/devices/storage_serial_1ATA_WDC_WD1600JS_23MHB0_WD_WCANM2384553'  (string)
  info.product = 'Volume'  (string)
  info.udi = '/org/freedesktop/Hal/devices/volume_part2_size_1024'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  linux.sysfs_path = '/sys/block/sda/sda2'  (string)
  storage.model = ''  (string)
  volume.block_size = 512  (0x200)  (int)
  volume.fstype = ''  (string)
  volume.fsusage = ''  (string)
  volume.fsversion = ''  (string)
  volume.is_disc = false  (bool)
  volume.is_mounted = false  (bool)
  volume.is_mounted_read_only = false  (bool)
  volume.is_partition = true  (bool)
  volume.label = ''  (string)
  volume.linux.is_device_mapper = false  (bool)
  volume.mount_point = ''  (string)
  volume.num_blocks = 2  (0x2)  (int)
  volume.partition.media_size = 160041885696  (0x25433d6000)  (uint64)
  volume.partition.number = 2  (0x2)  (int)
  volume.partition.start = 62915166720  (0xea6094200)  (uint64)
  volume.size = 1024  (0x400)  (uint64)
  volume.uuid = ''  (string)

udi = '/org/freedesktop/Hal/devices/volume_uuid_ECF84A23F849EC80'
  block.device = '/dev/sda1'  (string)
  block.is_volume = true  (bool)
  block.major = 8  (0x8)  (int)
  block.minor = 1  (0x1)  (int)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_1ATA_WDC_WD1600JS_23MHB0_WD_WCANM2384553'  (string)
  info.capabilities = {'volume', 'block'} (string list)
  info.category = 'volume'  (string)
  info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
  info.parent = '/org/freedesktop/Hal/devices/storage_serial_1ATA_WDC_WD1600JS_23MHB0_WD_WCANM2384553'  (string)
  info.product = 'Volume (ntfs)'  (string)
  info.udi = '/org/freedesktop/Hal/devices/volume_uuid_ECF84A23F849EC80'  (string)
  linux.fstab.mountpoint = '/media/windows'  (string)
  linux.fstab.options = 'defaults,nls=utf8,umask=007,gid=46'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  linux.sysfs_path = '/sys/block/sda/sda1'  (string)
  org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list)
  org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list)
  org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list)
  org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
  storage.model = ''  (string)
  volume.block_size = 512  (0x200)  (int)
  volume.fstype = 'ntfs'  (string)
  volume.fsusage = 'filesystem'  (string)
  volume.fsversion = '3.1'  (string)
  volume.ignore = false  (bool)
  volume.is_disc = false  (bool)
  volume.is_mounted = true  (bool)
  volume.is_mounted_read_only = true  (bool)
  volume.is_partition = true  (bool)
  volume.label = ''  (string)
  volume.linux.is_device_mapper = false  (bool)
  volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'uid=', 'gid=', 'umask=', 'locale=', 'utf8'} (string list)
  volume.mount_point = '/media/windows'  (string)
  volume.num_blocks = 122881122  (0x7530462)  (int)
  volume.partition.flags = {'boot'} (string list)
  volume.partition.label = ''  (string)
  volume.partition.media_size = 160041885696  (0x25433d6000)  (uint64)
  volume.partition.number = 1  (0x1)  (int)
  volume.partition.scheme = 'mbr'  (string)
  volume.partition.start = 32256  (0x7e00)  (uint64)
  volume.partition.type = '0x07'  (string)
  volume.partition.uuid = ''  (string)
  volume.size = 62915134464  (0xea608c400)  (uint64)
  volume.unmount.valid_options = {'lazy'} (string list)
  volume.uuid = 'ECF84A23F849EC80'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_25a3_scsi_host_0_scsi_device_lun0_scsi_generic'
  info.capabilities = {'scsi_generic'} (string list)
  info.category = 'scsi_generic'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_25a3_scsi_host_0_scsi_device_lun0'  (string)
  info.product = 'SCSI Generic Interface'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_25a3_scsi_host_0_scsi_device_lun0_scsi_generic'  (string)
  linux.device_file = '/dev/sg1'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi_generic'  (string)
  linux.sysfs_path = '/sys/class/scsi_generic/sg1'  (string)
  scsi_generic.device = '/dev/sg1'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_25a3_scsi_host'
  info.capabilities = {'scsi_host'} (string list)
  info.category = 'scsi_host'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_25a3'  (string)
  info.product = 'SCSI Host Adapter'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_25a3_scsi_host'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi_host'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host0'  (string)
  scsi_host.host = 0  (0x0)  (int)

udi = '/org/freedesktop/Hal/devices/pci_8086_25a3_scsi_host_scsi_device_lun0'
  info.bus = 'scsi'  (string)
  info.linux.driver = 'sr'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_25a3_scsi_host'  (string)
  info.product = 'SCSI Device'  (string)
  info.subsystem = 'scsi'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_25a3_scsi_host_scsi_device_lun0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0'  (string)
  scsi.bus = 0  (0x0)  (int)
  scsi.host = 0  (0x0)  (int)
  scsi.lun = 0  (0x0)  (int)
  scsi.model = 'CD-ROM LTN-489S'  (string)
  scsi.target = 0  (0x0)  (int)
  scsi.type = 'cdrom'  (string)
  scsi.vendor = 'LITE-ON'  (string)

udi = '/org/freedesktop/Hal/devices/storage_model_CD_ROM_LTN_489S'
  block.device = '/dev/scd0'  (string)
  block.is_volume = false  (bool)
  block.major = 11  (0xb)  (int)
  block.minor = 0  (0x0)  (int)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_model_CD_ROM_LTN_489S'  (string)
  info.addons = {'hald-addon-storage'} (string list)
  info.capabilities = {'storage', 'block', 'storage.cdrom'} (string list)
  info.category = 'storage'  (string)
  info.interfaces = {'org.freedesktop.Hal.Device.Storage', 'org.freedesktop.Hal.Device.Storage'} (string list)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_25a3_scsi_host_scsi_device_lun0'  (string)
  info.product = 'CD-ROM LTN-489S'  (string)
  info.udi = '/org/freedesktop/Hal/devices/storage_model_CD_ROM_LTN_489S'  (string)
  info.vendor = 'LITE-ON'  (string)
  linux.fstab.mountpoint = '/media/cdrom1'  (string)
  linux.fstab.options = 'user,noauto'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  linux.sysfs_path = '/sys/block/sr0'  (string)
  org.freedesktop.Hal.Device.Storage.method_argnames = {'extra_options', 'extra_options'} (string list)
  org.freedesktop.Hal.Device.Storage.method_execpaths = {'hal-storage-eject', 'hal-storage-closetray'} (string list)
  org.freedesktop.Hal.Device.Storage.method_names = {'Eject', 'CloseTray'} (string list)
  org.freedesktop.Hal.Device.Storage.method_signatures = {'as', 'as'} (string list)
  storage.automount_enabled_hint = true  (bool)
  storage.bus = 'scsi'  (string)
  storage.cdrom.bd = false  (bool)
  storage.cdrom.bdr = false  (bool)
  storage.cdrom.bdre = false  (bool)
  storage.cdrom.cdr = false  (bool)
  storage.cdrom.cdrw = false  (bool)
  storage.cdrom.dvd = false  (bool)
  storage.cdrom.dvdplusr = false  (bool)
  storage.cdrom.dvdplusrdl = false  (bool)
  storage.cdrom.dvdplusrw = false  (bool)
  storage.cdrom.dvdplusrwdl = false  (bool)
  storage.cdrom.dvdr = false  (bool)
  storage.cdrom.dvdram = false  (bool)
  storage.cdrom.dvdrw = false  (bool)
  storage.cdrom.hddvd = false  (bool)
  storage.cdrom.hddvdr = false  (bool)
  storage.cdrom.hddvdrw = false  (bool)
  storage.cdrom.mo = false  (bool)
  storage.cdrom.mrw = true  (bool)
  storage.cdrom.mrw_w = true  (bool)
  storage.cdrom.read_speed = 8467  (0x2113)  (int)
  storage.cdrom.support_media_changed = true  (bool)
  storage.cdrom.support_multisession = true  (bool)
  storage.cdrom.write_speed = 0  (0x0)  (int)
  storage.cdrom.write_speeds = {} (string list)
  storage.drive_type = 'cdrom'  (string)
  storage.firmware_version = '8US5'  (string)
  storage.hotpluggable = false  (bool)
  storage.lun = 0  (0x0)  (int)
  storage.media_check_enabled = true  (bool)
  storage.model = 'CD-ROM LTN-489S'  (string)
  storage.no_partitions_hint = true  (bool)
  storage.originating_device = '/org/freedesktop/Hal/devices/pci_8086_25a3_scsi_host_scsi_device_lun0'  (string)
  storage.physical_device = '/org/freedesktop/Hal/devices/pci_8086_25a3_scsi_host_scsi_device_lun0'  (string)
  storage.removable = true  (bool)
  storage.removable.media_available = false  (bool)
  storage.requires_eject = true  (bool)
  storage.size = 0  (0x0)  (uint64)
  storage.vendor = 'LITE-ON'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_25a3_scsi_host_scsi_device_lun0_scsi_generic'
  info.capabilities = {'scsi_generic'} (string list)
  info.category = 'scsi_generic'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_25a3_scsi_host_scsi_device_lun0'  (string)
  info.product = 'SCSI Generic Interface'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_25a3_scsi_host_scsi_device_lun0_scsi_generic'  (string)
  linux.device_file = '/dev/sg0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi_generic'  (string)
  linux.sysfs_path = '/sys/class/scsi_generic/sg0'  (string)
  scsi_generic.device = '/dev/sg0'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_25a1'
  info.bus = 'pci'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = '6300ESB LPC Interface Controller'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_25a1'  (string)
  info.vendor = 'Intel Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.0'  (string)
  pci.device_class = 6  (0x6)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 1  (0x1)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.0'  (string)
  pci.product = '6300ESB LPC Interface Controller'  (string)
  pci.product_id = 9633  (0x25a1)  (int)
  pci.subsys_product_id = 0  (0x0)  (int)
  pci.subsys_vendor_id = 0  (0x0)  (int)
  pci.vendor = 'Intel Corporation'  (string)
  pci.vendor_id = 32902  (0x8086)  (int)

udi = '/org/freedesktop/Hal/devices/pci_8086_244e'
  info.bus = 'pci'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = '82801 PCI Bridge'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_244e'  (string)
  info.vendor = 'Intel Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0'  (string)
  pci.device_class = 6  (0x6)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 4  (0x4)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0'  (string)
  pci.product = '82801 PCI Bridge'  (string)
  pci.product_id = 9294  (0x244e)  (int)
  pci.subsys_product_id = 0  (0x0)  (int)
  pci.subsys_vendor_id = 0  (0x0)  (int)
  pci.vendor = 'Intel Corporation'  (string)
  pci.vendor_id = 32902  (0x8086)  (int)

udi = '/org/freedesktop/Hal/devices/pci_10cd_1300'
  info.bus = 'pci'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_244e'  (string)
  info.product = 'ABP940-U / ABP960-U'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_10cd_1300'  (string)
  info.vendor = 'Advanced System Products, Inc'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:04:08.0'  (string)
  pci.device_class = 1  (0x1)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 0  (0x0)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:04:08.0'  (string)
  pci.product = 'ABP940-U / ABP960-U'  (string)
  pci.product_id = 4864  (0x1300)  (int)
  pci.subsys_product = 'ASC1300 SCSI Adapter'  (string)
  pci.subsys_product_id = 4880  (0x1310)  (int)
  pci.subsys_vendor = 'Advanced System Products, Inc'  (string)
  pci.subsys_vendor_id = 4301  (0x10cd)  (int)
  pci.vendor = 'Advanced System Products, Inc'  (string)
  pci.vendor_id = 4301  (0x10cd)  (int)

udi = '/org/freedesktop/Hal/devices/pci_1095_3112'
  info.bus = 'pci'  (string)
  info.linux.driver = 'sata_sil'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_244e'  (string)
  info.product = 'SiI 3112 [SATALink/SATARaid] Serial ATA Controller'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1095_3112'  (string)
  info.vendor = 'Silicon Image, Inc.'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:04:06.0'  (string)
  pci.device_class = 1  (0x1)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 4  (0x4)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:04:06.0'  (string)
  pci.product = 'SiI 3112 [SATALink/SATARaid] Serial ATA Controller'  (string)
  pci.product_id = 12562  (0x3112)  (int)
  pci.subsys_product = 'SiI 3112 SATARaid Controller'  (string)
  pci.subsys_product_id = 24850  (0x6112)  (int)
  pci.subsys_vendor = 'Silicon Image, Inc.'  (string)
  pci.subsys_vendor_id = 4245  (0x1095)  (int)
  pci.vendor = 'Silicon Image, Inc.'  (string)
  pci.vendor_id = 4245  (0x1095)  (int)

udi = '/org/freedesktop/Hal/devices/pci_1095_3112_scsi_host'
  info.capabilities = {'scsi_host'} (string list)
  info.category = 'scsi_host'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1095_3112'  (string)
  info.product = 'SCSI Host Adapter'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1095_3112_scsi_host'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi_host'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:04:06.0/host4'  (string)
  scsi_host.host = 4  (0x4)  (int)

udi = '/org/freedesktop/Hal/devices/pci_1095_3112_scsi_host_scsi_device_lun0'
  info.bus = 'scsi'  (string)
  info.linux.driver = 'sr'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1095_3112_scsi_host'  (string)
  info.product = 'SCSI Device'  (string)
  info.subsystem = 'scsi'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1095_3112_scsi_host_scsi_device_lun0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:04:06.0/host4/target4:0:0/4:0:0:0'  (string)
  scsi.bus = 0  (0x0)  (int)
  scsi.host = 4  (0x4)  (int)
  scsi.lun = 0  (0x0)  (int)
  scsi.model = 'DVDR   PX-755A'  (string)
  scsi.target = 0  (0x0)  (int)
  scsi.type = 'cdrom'  (string)
  scsi.vendor = 'PLEXTOR'  (string)

udi = '/org/freedesktop/Hal/devices/storage_model_DVDR___PX_755A'
  block.device = '/dev/scd1'  (string)
  block.is_volume = false  (bool)
  block.major = 11  (0xb)  (int)
  block.minor = 1  (0x1)  (int)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_model_DVDR___PX_755A'  (string)
  info.addons = {'hald-addon-storage'} (string list)
  info.capabilities = {'storage', 'block', 'storage.cdrom'} (string list)
  info.category = 'storage'  (string)
  info.interfaces = {'org.freedesktop.Hal.Device.Storage', 'org.freedesktop.Hal.Device.Storage'} (string list)
  info.parent = '/org/freedesktop/Hal/devices/pci_1095_3112_scsi_host_scsi_device_lun0'  (string)
  info.product = 'DVDR   PX-755A'  (string)
  info.udi = '/org/freedesktop/Hal/devices/storage_model_DVDR___PX_755A'  (string)
  info.vendor = 'PLEXTOR'  (string)
  linux.fstab.mountpoint = '/media/cdrom2'  (string)
  linux.fstab.options = 'user,noauto'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  linux.sysfs_path = '/sys/block/sr1'  (string)
  org.freedesktop.Hal.Device.Storage.method_argnames = {'extra_options', 'extra_options'} (string list)
  org.freedesktop.Hal.Device.Storage.method_execpaths = {'hal-storage-eject', 'hal-storage-closetray'} (string list)
  org.freedesktop.Hal.Device.Storage.method_names = {'Eject', 'CloseTray'} (string list)
  org.freedesktop.Hal.Device.Storage.method_signatures = {'as', 'as'} (string list)
  storage.automount_enabled_hint = true  (bool)
  storage.bus = 'scsi'  (string)
  storage.cdrom.bd = false  (bool)
  storage.cdrom.bdr = false  (bool)
  storage.cdrom.bdre = false  (bool)
  storage.cdrom.cdr = true  (bool)
  storage.cdrom.cdrw = true  (bool)
  storage.cdrom.dvd = true  (bool)
  storage.cdrom.dvdplusr = true  (bool)
  storage.cdrom.dvdplusrdl = true  (bool)
  storage.cdrom.dvdplusrw = true  (bool)
  storage.cdrom.dvdplusrwdl = false  (bool)
  storage.cdrom.dvdr = true  (bool)
  storage.cdrom.dvdram = false  (bool)
  storage.cdrom.dvdrw = true  (bool)
  storage.cdrom.hddvd = false  (bool)
  storage.cdrom.hddvdr = false  (bool)
  storage.cdrom.hddvdrw = false  (bool)
  storage.cdrom.mo = false  (bool)
  storage.cdrom.mrw = true  (bool)
  storage.cdrom.mrw_w = true  (bool)
  storage.cdrom.read_speed = 7056  (0x1b90)  (int)
  storage.cdrom.support_media_changed = true  (bool)
  storage.cdrom.support_multisession = true  (bool)
  storage.cdrom.write_speed = 8467  (0x2113)  (int)
  storage.cdrom.write_speeds = {'8467', '5645', '2822', '1411', '706'} (string list)
  storage.drive_type = 'cdrom'  (string)
  storage.firmware_version = '1.02'  (string)
  storage.hotpluggable = false  (bool)
  storage.lun = 0  (0x0)  (int)
  storage.media_check_enabled = true  (bool)
  storage.model = 'DVDR   PX-755A'  (string)
  storage.no_partitions_hint = true  (bool)
  storage.originating_device = '/org/freedesktop/Hal/devices/pci_1095_3112_scsi_host_scsi_device_lun0'  (string)
  storage.physical_device = '/org/freedesktop/Hal/devices/pci_1095_3112_scsi_host_scsi_device_lun0'  (string)
  storage.removable = true  (bool)
  storage.removable.media_available = false  (bool)
  storage.requires_eject = true  (bool)
  storage.size = 0  (0x0)  (uint64)
  storage.vendor = 'PLEXTOR'  (string)

udi = '/org/freedesktop/Hal/devices/pci_1095_3112_scsi_host_scsi_device_lun0_scsi_generic'
  info.capabilities = {'scsi_generic'} (string list)
  info.category = 'scsi_generic'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1095_3112_scsi_host_scsi_device_lun0'  (string)
  info.product = 'SCSI Generic Interface'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1095_3112_scsi_host_scsi_device_lun0_scsi_generic'  (string)
  linux.device_file = '/dev/sg3'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'scsi_generic'  (string)
  linux.sysfs_path = '/sys/class/scsi_generic/sg3'  (string)
  scsi_generic.device = '/dev/sg3'  (string)

udi = '/org/freedesktop/Hal/devices/pci_1002_5159'
  info.bus = 'pci'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_244e'  (string)
  info.product = 'Radeon RV100 QY [Radeon 7000/VE]'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1002_5159'  (string)
  info.vendor = 'ATI Technologies Inc'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:04:02.0'  (string)
  pci.device_class = 3  (0x3)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 0  (0x0)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:04:02.0'  (string)
  pci.product = 'Radeon RV100 QY [Radeon 7000/VE]'  (string)
  pci.product_id = 20825  (0x5159)  (int)
  pci.subsys_product = 'IBM eServer xSeries server mainboard'  (string)
  pci.subsys_product_id = 712  (0x2c8)  (int)
  pci.subsys_vendor = 'IBM'  (string)
  pci.subsys_vendor_id = 4116  (0x1014)  (int)
  pci.vendor = 'ATI Technologies Inc'  (string)
  pci.vendor_id = 4098  (0x1002)  (int)

udi = '/org/freedesktop/Hal/devices/pci_8086_25ad'
  info.bus = 'pci'  (string)
  info.linux.driver = 'ehci_hcd'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = '6300ESB USB2 Enhanced Host Controller'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_25ad'  (string)
  info.vendor = 'Intel Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7'  (string)
  pci.device_class = 12  (0xc)  (int)
  pci.device_protocol = 32  (0x20)  (int)
  pci.device_subclass = 3  (0x3)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7'  (string)
  pci.product = '6300ESB USB2 Enhanced Host Controller'  (string)
  pci.product_id = 9645  (0x25ad)  (int)
  pci.subsys_product_id = 685  (0x2ad)  (int)
  pci.subsys_vendor = 'IBM'  (string)
  pci.subsys_vendor_id = 4116  (0x1014)  (int)
  pci.vendor = 'Intel Corporation'  (string)
  pci.vendor_id = 32902  (0x8086)  (int)

udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_7'
  info.bus = 'usb_device'  (string)
  info.linux.driver = 'usb'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_25ad'  (string)
  info.product = 'EHCI Host Controller'  (string)
  info.subsystem = 'usb_device'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_7'  (string)
  info.vendor = 'Linux 2.6.20-16-generic ehci_hcd'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb3'  (string)
  usb_device.bus_number = 3  (0x3)  (int)
  usb_device.can_wake_up = true  (bool)
  usb_device.configuration_value = 1  (0x1)  (int)
  usb_device.device_class = 9  (0x9)  (int)
  usb_device.device_protocol = 1  (0x1)  (int)
  usb_device.device_revision_bcd = 518  (0x206)  (int)
  usb_device.device_subclass = 0  (0x0)  (int)
  usb_device.is_self_powered = true  (bool)
  usb_device.linux.device_number = 1  (0x1)  (int)
  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb3'  (string)
  usb_device.max_power = 0  (0x0)  (int)
  usb_device.num_configurations = 1  (0x1)  (int)
  usb_device.num_interfaces = 1  (0x1)  (int)
  usb_device.num_ports = 4  (0x4)  (int)
  usb_device.product = 'EHCI Host Controller'  (string)
  usb_device.product_id = 0  (0x0)  (int)
  usb_device.serial = '0000:00:1d.7'  (string)
  usb_device.speed = 480.0 (480) (double)
  usb_device.speed_bcd = 294912  (0x48000)  (int)
  usb_device.vendor = 'Linux 2.6.20-16-generic ehci_hcd'  (string)
  usb_device.vendor_id = 0  (0x0)  (int)
  usb_device.version = 2.0 (2) (double)
  usb_device.version_bcd = 512  (0x200)  (int)

udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_7_usbraw'
  info.capabilities = {'usbraw'} (string list)
  info.category = 'usbraw'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_7'  (string)
  info.product = 'USB Raw Device Access'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_7_usbraw'  (string)
  linux.device_file = '/dev/bus/usb/003/001'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb_device'  (string)
  linux.sysfs_path = '/sys/class/usb_device/usbdev3.1'  (string)
  usbraw.device = '/dev/bus/usb/003/001'  (string)

udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_7_if0'
  info.bus = 'usb'  (string)
  info.linux.driver = 'hub'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_7'  (string)
  info.product = 'USB Hub Interface'  (string)
  info.subsystem = 'usb'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_7_if0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb3/3-0:1.0'  (string)
  usb.bus_number = 3  (0x3)  (int)
  usb.can_wake_up = true  (bool)
  usb.configuration_value = 1  (0x1)  (int)
  usb.device_class = 9  (0x9)  (int)
  usb.device_protocol = 1  (0x1)  (int)
  usb.device_revision_bcd = 518  (0x206)  (int)
  usb.device_subclass = 0  (0x0)  (int)
  usb.interface.class = 9  (0x9)  (int)
  usb.interface.number = 0  (0x0)  (int)
  usb.interface.protocol = 0  (0x0)  (int)
  usb.interface.subclass = 0  (0x0)  (int)
  usb.is_self_powered = true  (bool)
  usb.linux.device_number = 1  (0x1)  (int)
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb3/3-0:1.0'  (string)
  usb.max_power = 0  (0x0)  (int)
  usb.num_configurations = 1  (0x1)  (int)
  usb.num_interfaces = 1  (0x1)  (int)
  usb.num_ports = 4  (0x4)  (int)
  usb.product = 'USB Hub Interface'  (string)
  usb.product_id = 0  (0x0)  (int)
  usb.serial = '0000:00:1d.7'  (string)
  usb.speed = 480.0 (480) (double)
  usb.speed_bcd = 294912  (0x48000)  (int)
  usb.vendor = 'Linux 2.6.20-16-generic ehci_hcd'  (string)
  usb.vendor_id = 0  (0x0)  (int)
  usb.version = 2.0 (2) (double)
  usb.version_bcd = 512  (0x200)  (int)

udi = '/org/freedesktop/Hal/devices/pci_8086_25ac'
  info.bus = 'pci'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = '6300ESB I/O Advanced Programmable Interrupt Controller'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_25ac'  (string)
  info.vendor = 'Intel Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.5'  (string)
  pci.device_class = 8  (0x8)  (int)
  pci.device_protocol = 32  (0x20)  (int)
  pci.device_subclass = 0  (0x0)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.5'  (string)
  pci.product = '6300ESB I/O Advanced Programmable Interrupt Controller'  (string)
  pci.product_id = 9644  (0x25ac)  (int)
  pci.subsys_product_id = 685  (0x2ad)  (int)
  pci.subsys_vendor = 'IBM'  (string)
  pci.subsys_vendor_id = 4116  (0x1014)  (int)
  pci.vendor = 'Intel Corporation'  (string)
  pci.vendor_id = 32902  (0x8086)  (int)

udi = '/org/freedesktop/Hal/devices/pci_8086_25ab'
  info.bus = 'pci'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = '6300ESB Watchdog Timer'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_25ab'  (string)
  info.vendor = 'Intel Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.4'  (string)
  pci.device_class = 8  (0x8)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 128  (0x80)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.4'  (string)
  pci.product = '6300ESB Watchdog Timer'  (string)
  pci.product_id = 9643  (0x25ab)  (int)
  pci.subsys_product_id = 685  (0x2ad)  (int)
  pci.subsys_vendor = 'IBM'  (string)
  pci.subsys_vendor_id = 4116  (0x1014)  (int)
  pci.vendor = 'Intel Corporation'  (string)
  pci.vendor_id = 32902  (0x8086)  (int)

udi = '/org/freedesktop/Hal/devices/pci_8086_25aa'
  info.bus = 'pci'  (string)
  info.linux.driver = 'uhci_hcd'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = '6300ESB USB Universal Host Controller'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_25aa'  (string)
  info.vendor = 'Intel Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1'  (string)
  pci.device_class = 12  (0xc)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 3  (0x3)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1'  (string)
  pci.product = '6300ESB USB Universal Host Controller'  (string)
  pci.product_id = 9642  (0x25aa)  (int)
  pci.subsys_product_id = 685  (0x2ad)  (int)
  pci.subsys_vendor = 'IBM'  (string)
  pci.subsys_vendor_id = 4116  (0x1014)  (int)
  pci.vendor = 'Intel Corporation'  (string)
  pci.vendor_id = 32902  (0x8086)  (int)

udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_1'
  info.bus = 'usb_device'  (string)
  info.linux.driver = 'usb'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_25aa'  (string)
  info.product = 'UHCI Host Controller'  (string)
  info.subsystem = 'usb_device'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_1'  (string)
  info.vendor = 'Linux 2.6.20-16-generic uhci_hcd'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb2'  (string)
  usb_device.bus_number = 2  (0x2)  (int)
  usb_device.can_wake_up = true  (bool)
  usb_device.configuration_value = 1  (0x1)  (int)
  usb_device.device_class = 9  (0x9)  (int)
  usb_device.device_protocol = 0  (0x0)  (int)
  usb_device.device_revision_bcd = 518  (0x206)  (int)
  usb_device.device_subclass = 0  (0x0)  (int)
  usb_device.is_self_powered = true  (bool)
  usb_device.linux.device_number = 1  (0x1)  (int)
  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb2'  (string)
  usb_device.max_power = 0  (0x0)  (int)
  usb_device.num_configurations = 1  (0x1)  (int)
  usb_device.num_interfaces = 1  (0x1)  (int)
  usb_device.num_ports = 2  (0x2)  (int)
  usb_device.product = 'UHCI Host Controller'  (string)
  usb_device.product_id = 0  (0x0)  (int)
  usb_device.serial = '0000:00:1d.1'  (string)
  usb_device.speed = 12.0 (12) (double)
  usb_device.speed_bcd = 4608  (0x1200)  (int)
  usb_device.vendor = 'Linux 2.6.20-16-generic uhci_hcd'  (string)
  usb_device.vendor_id = 0  (0x0)  (int)
  usb_device.version = 1.1 (1.1) (double)
  usb_device.version_bcd = 272  (0x110)  (int)

udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_1_usbraw'
  info.capabilities = {'usbraw'} (string list)
  info.category = 'usbraw'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_1'  (string)
  info.product = 'USB Raw Device Access'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_1_usbraw'  (string)
  linux.device_file = '/dev/bus/usb/002/001'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb_device'  (string)
  linux.sysfs_path = '/sys/class/usb_device/usbdev2.1'  (string)
  usbraw.device = '/dev/bus/usb/002/001'  (string)

udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_1_if0'
  info.bus = 'usb'  (string)
  info.linux.driver = 'hub'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_1'  (string)
  info.product = 'USB Hub Interface'  (string)
  info.subsystem = 'usb'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_1_if0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb2/2-0:1.0'  (string)
  usb.bus_number = 2  (0x2)  (int)
  usb.can_wake_up = true  (bool)
  usb.configuration_value = 1  (0x1)  (int)
  usb.device_class = 9  (0x9)  (int)
  usb.device_protocol = 0  (0x0)  (int)
  usb.device_revision_bcd = 518  (0x206)  (int)
  usb.device_subclass = 0  (0x0)  (int)
  usb.interface.class = 9  (0x9)  (int)
  usb.interface.number = 0  (0x0)  (int)
  usb.interface.protocol = 0  (0x0)  (int)
  usb.interface.subclass = 0  (0x0)  (int)
  usb.is_self_powered = true  (bool)
  usb.linux.device_number = 1  (0x1)  (int)
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb2/2-0:1.0'  (string)
  usb.max_power = 0  (0x0)  (int)
  usb.num_configurations = 1  (0x1)  (int)
  usb.num_interfaces = 1  (0x1)  (int)
  usb.num_ports = 2  (0x2)  (int)
  usb.product = 'USB Hub Interface'  (string)
  usb.product_id = 0  (0x0)  (int)
  usb.serial = '0000:00:1d.1'  (string)
  usb.speed = 12.0 (12) (double)
  usb.speed_bcd = 4608  (0x1200)  (int)
  usb.vendor = 'Linux 2.6.20-16-generic uhci_hcd'  (string)
  usb.vendor_id = 0  (0x0)  (int)
  usb.version = 1.1 (1.1) (double)
  usb.version_bcd = 272  (0x110)  (int)

udi = '/org/freedesktop/Hal/devices/pci_8086_25a9'
  info.bus = 'pci'  (string)
  info.linux.driver = 'uhci_hcd'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = '6300ESB USB Universal Host Controller'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_25a9'  (string)
  info.vendor = 'Intel Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0'  (string)
  pci.device_class = 12  (0xc)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 3  (0x3)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0'  (string)
  pci.product = '6300ESB USB Universal Host Controller'  (string)
  pci.product_id = 9641  (0x25a9)  (int)
  pci.subsys_product_id = 685  (0x2ad)  (int)
  pci.subsys_vendor = 'IBM'  (string)
  pci.subsys_vendor_id = 4116  (0x1014)  (int)
  pci.vendor = 'Intel Corporation'  (string)
  pci.vendor_id = 32902  (0x8086)  (int)

udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0'
  info.bus = 'usb_device'  (string)
  info.linux.driver = 'usb'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_25a9'  (string)
  info.product = 'UHCI Host Controller'  (string)
  info.subsystem = 'usb_device'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0'  (string)
  info.vendor = 'Linux 2.6.20-16-generic uhci_hcd'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb1'  (string)
  usb_device.bus_number = 1  (0x1)  (int)
  usb_device.can_wake_up = true  (bool)
  usb_device.configuration_value = 1  (0x1)  (int)
  usb_device.device_class = 9  (0x9)  (int)
  usb_device.device_protocol = 0  (0x0)  (int)
  usb_device.device_revision_bcd = 518  (0x206)  (int)
  usb_device.device_subclass = 0  (0x0)  (int)
  usb_device.is_self_powered = true  (bool)
  usb_device.linux.device_number = 1  (0x1)  (int)
  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb1'  (string)
  usb_device.max_power = 0  (0x0)  (int)
  usb_device.num_configurations = 1  (0x1)  (int)
  usb_device.num_interfaces = 1  (0x1)  (int)
  usb_device.num_ports = 2  (0x2)  (int)
  usb_device.product = 'UHCI Host Controller'  (string)
  usb_device.product_id = 0  (0x0)  (int)
  usb_device.serial = '0000:00:1d.0'  (string)
  usb_device.speed = 12.0 (12) (double)
  usb_device.speed_bcd = 4608  (0x1200)  (int)
  usb_device.vendor = 'Linux 2.6.20-16-generic uhci_hcd'  (string)
  usb_device.vendor_id = 0  (0x0)  (int)
  usb_device.version = 1.1 (1.1) (double)
  usb_device.version_bcd = 272  (0x110)  (int)

udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0_usbraw'
  info.capabilities = {'usbraw'} (string list)
  info.category = 'usbraw'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0'  (string)
  info.product = 'USB Raw Device Access'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0_usbraw'  (string)
  linux.device_file = '/dev/bus/usb/001/001'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb_device'  (string)
  linux.sysfs_path = '/sys/class/usb_device/usbdev1.1'  (string)
  usbraw.device = '/dev/bus/usb/001/001'  (string)

udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0_if0'
  info.bus = 'usb'  (string)
  info.linux.driver = 'hub'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0'  (string)
  info.product = 'USB Hub Interface'  (string)
  info.subsystem = 'usb'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0_if0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-0:1.0'  (string)
  usb.bus_number = 1  (0x1)  (int)
  usb.can_wake_up = true  (bool)
  usb.configuration_value = 1  (0x1)  (int)
  usb.device_class = 9  (0x9)  (int)
  usb.device_protocol = 0  (0x0)  (int)
  usb.device_revision_bcd = 518  (0x206)  (int)
  usb.device_subclass = 0  (0x0)  (int)
  usb.interface.class = 9  (0x9)  (int)
  usb.interface.number = 0  (0x0)  (int)
  usb.interface.protocol = 0  (0x0)  (int)
  usb.interface.subclass = 0  (0x0)  (int)
  usb.is_self_powered = true  (bool)
  usb.linux.device_number = 1  (0x1)  (int)
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-0:1.0'  (string)
  usb.max_power = 0  (0x0)  (int)
  usb.num_configurations = 1  (0x1)  (int)
  usb.num_interfaces = 1  (0x1)  (int)
  usb.num_ports = 2  (0x2)  (int)
  usb.product = 'USB Hub Interface'  (string)
  usb.product_id = 0  (0x0)  (int)
  usb.serial = '0000:00:1d.0'  (string)
  usb.speed = 12.0 (12) (double)
  usb.speed_bcd = 4608  (0x1200)  (int)
  usb.vendor = 'Linux 2.6.20-16-generic uhci_hcd'  (string)
  usb.vendor_id = 0  (0x0)  (int)
  usb.version = 1.1 (1.1) (double)
  usb.version_bcd = 272  (0x110)  (int)

udi = '/org/freedesktop/Hal/devices/pci_8086_25ae'
  info.bus = 'pci'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = '6300ESB 64-bit PCI-X Bridge'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_25ae'  (string)
  info.vendor = 'Intel Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.0'  (string)
  pci.device_class = 6  (0x6)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 4  (0x4)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.0'  (string)
  pci.product = '6300ESB 64-bit PCI-X Bridge'  (string)
  pci.product_id = 9646  (0x25ae)  (int)
  pci.subsys_product_id = 0  (0x0)  (int)
  pci.subsys_vendor_id = 0  (0x0)  (int)
  pci.vendor = 'Intel Corporation'  (string)
  pci.vendor_id = 32902  (0x8086)  (int)

udi = '/org/freedesktop/Hal/devices/pci_8086_257b'
  info.bus = 'pci'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = '82875P/E7210 Processor to PCI to CSA Bridge'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_257b'  (string)
  info.vendor = 'Intel Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.0'  (string)
  pci.device_class = 6  (0x6)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 4  (0x4)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.0'  (string)
  pci.product = '82875P/E7210 Processor to PCI to CSA Bridge'  (string)
  pci.product_id = 9595  (0x257b)  (int)
  pci.subsys_product_id = 0  (0x0)  (int)
  pci.subsys_vendor_id = 0  (0x0)  (int)
  pci.vendor = 'Intel Corporation'  (string)
  pci.vendor_id = 32902  (0x8086)  (int)

udi = '/org/freedesktop/Hal/devices/pci_8086_1075'
  info.bus = 'pci'  (string)
  info.linux.driver = 'e1000'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_257b'  (string)
  info.product = '82547GI Gigabit Ethernet Controller'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_1075'  (string)
  info.vendor = 'Intel Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.0/0000:02:01.0'  (string)
  pci.device_class = 2  (0x2)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 0  (0x0)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.0/0000:02:01.0'  (string)
  pci.product = '82547GI Gigabit Ethernet Controller'  (string)
  pci.product_id = 4213  (0x1075)  (int)
  pci.subsys_product_id = 685  (0x2ad)  (int)
  pci.subsys_vendor = 'IBM'  (string)
  pci.subsys_vendor_id = 4116  (0x1014)  (int)
  pci.vendor = 'Intel Corporation'  (string)
  pci.vendor_id = 32902  (0x8086)  (int)

udi = '/org/freedesktop/Hal/devices/net_00_11_25_ac_15_b0'
  info.capabilities = {'net', 'net.80203'} (string list)
  info.category = 'net.80203'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_1075'  (string)
  info.product = 'Networking Interface'  (string)
  info.udi = '/org/freedesktop/Hal/devices/net_00_11_25_ac_15_b0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'net'  (string)
  linux.sysfs_path = '/sys/class/net/eth0'  (string)
  net.80203.mac_address = 73646478768  (0x1125ac15b0)  (uint64)
  net.address = '00:11:25:ac:15:b0'  (string)
  net.arp_proto_hw_id = 1  (0x1)  (int)
  net.interface = 'eth0'  (string)
  net.linux.ifindex = 2  (0x2)  (int)
  net.originating_device = '/org/freedesktop/Hal/devices/pci_8086_1075'  (string)
  net.physical_device = '/org/freedesktop/Hal/devices/pci_8086_1075'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_2578'
  info.bus = 'pci'  (string)
  info.linux.driver = 'agpgart-intel'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = '82875P/E7210 Memory Controller Hub'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2578'  (string)
  info.vendor = 'Intel Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0'  (string)
  pci.device_class = 6  (0x6)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 0  (0x0)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0'  (string)
  pci.product = '82875P/E7210 Memory Controller Hub'  (string)
  pci.product_id = 9592  (0x2578)  (int)
  pci.subsys_product_id = 686  (0x2ae)  (int)
  pci.subsys_vendor = 'IBM'  (string)
  pci.subsys_vendor_id = 4116  (0x1014)  (int)
  pci.vendor = 'Intel Corporation'  (string)
  pci.vendor_id = 32902  (0x8086)  (int)


Dumped 84 device(s) from the Global Device List.
------------------------------------------------