My External hard disk Seagate doeasn't mount automaticly under Fiesty

[Blido]

Binary package hint: hal

Automount works under Edgy but not under Fiesty. Manualmount is possible but I'm only able to do it writeprotected(Might be my fault have'nt been using Linux for so many mounths yet) ( sudo mount /dev/sda1 -t vfat /home/stefan/Desktop/seagate/)

Just ask if I missed to send some info.

Here is devices.txt:

brw-rw---- 1 root plugdev 8, 0 2007-05-15 12:25 /dev/sda
brw-rw---- 1 root plugdev 8, 1 2007-05-15 12:25 /dev/sda1
brw-rw---- 1 root plugdev 8, 16 2007-05-15 11:26 /dev/sdb
brw-rw---- 1 root plugdev 8, 17 2007-05-15 11:26 /dev/sdb1

Here is dmesg.txt

[ 0.000000] Linux version 2.6.20-15-generic (root@palmer) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Apr 15 07:36:31 UTC 2007 (Ubuntu 2.6.20-15.27-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009b800 end: 000000000009b800 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000009b800 size: 0000000000004800 end: 00000000000a0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000d2000 size: 000000000002e000 end: 0000000000100000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000001fda0000 end: 000000001fea0000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000001fea0000 size: 000000000000e000 end: 000000001feae000 type: 3
[ 0.000000] copy_e820_map() start: 000000001feae000 size: 0000000000052000 end: 000000001ff00000 type: 4
[ 0.000000] copy_e820_map() start: 000000001ff00000 size: 0000000000100000 end: 0000000020000000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000010000 end: 00000000fec10000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fff80000 size: 0000000000080000 end: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009b800 (usable)
[ 0.000000] BIOS-e820: 000000000009b800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001fea0000 (usable)
[ 0.000000] BIOS-e820: 000000001fea0000 - 000000001feae000 (ACPI data)
[ 0.000000] BIOS-e820: 000000001feae000 - 000000001ff00000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000001ff00000 - 0000000020000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 510MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f6de0
[ 0.000000] Entering add_active_range(0, 0, 130720) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 130720
[ 0.000000] HighMem 130720 -> 130720
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 130720
[ 0.000000] On node 0 totalpages: 130720
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 989 pages used for memmap
[ 0.000000] Normal zone: 125635 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP (v000 PTLTD ) @ 0x000f6db0
[ 0.000000] ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x1fea81d8
[ 0.000000] ACPI: FADT (v001 ATI Piranha 0x06040000 ATI 0x000f4240) @ 0x1feade41
[ 0.000000] ACPI: SSDT (v001 PTLTD POWERNOW 0x06040000 LTP 0x00000001) @ 0x1feadeb5
[ 0.000000] ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0x1feadf6a
[ 0.000000] ACPI: MCFG (v001 PTLTD MCFG 0x06040000 LTP 0x00000000) @ 0x1feadfc4
[ 0.000000] ACPI: DSDT (v001 ATI SB400 0x06040000 MSFT 0x0100000e) @ 0x00000000
[ 0.000000] ATI board detected. Disabling timer routing over 8254.
[ 0.000000] ACPI: PM-Timer IO Port: 0x8008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:12 APIC version 16
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
[ 0.000000] Detected 1600.174 MHz processor.
[ 12.206301] Built 1 zonelists. Total pages: 129699
[ 12.206305] Kernel command line: root=UUID=dd049764-cdb7-4245-b38a-039e4f662d5d ro quiet splash
[ 12.206462] mapped APIC to ffffd000 (fee00000)
[ 12.206465] mapped IOAPIC to ffffc000 (fec00000)
[ 12.206469] Enabling fast FPU save and restore... done.
[ 12.206472] Enabling unmasked SIMD FPU exception support... done.
[ 12.206481] Initializing CPU#0
[ 12.206549] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 12.207927] Console: colour VGA+ 80x25
[ 12.208154] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 12.208424] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 12.219299] Memory: 507056k/522880k available (1992k kernel code, 15188k reserved, 893k data, 328k init, 0k highmem)
[ 12.219311] virtual kernel memory layout:
[ 12.219313] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
[ 12.219314] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 12.219316] vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
[ 12.219318] lowmem : 0xc0000000 - 0xdfea0000 ( 510 MB)
[ 12.219319] .init : 0xc03d7000 - 0xc0429000 ( 328 kB)
[ 12.219320] .data : 0xc02f2264 - 0xc03d16d4 ( 893 kB)
[ 12.219322] .text : 0xc0100000 - 0xc02f2264 (1992 kB)
[ 12.219325] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 12.298419] Calibrating delay using timer specific routine.. 3203.47 BogoMIPS (lpj=6406945)
[ 12.298461] Security Framework v1.0.0 initialized
[ 12.298466] SELinux: Disabled at boot.
[ 12.298483] Mount-cache hash table entries: 512
[ 12.298613] CPU: After generic identify, caps: 078bfbff c3d3fbff 00000000 00000000 00000000 00000000 00000001
[ 12.298622] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 12.298625] CPU: L2 Cache: 256K (64 bytes/line)
[ 12.298628] CPU: After all inits, caps: 078bfbff c3d3fbff 00000000 00000410 00000000 00000000 00000001
[ 12.298638] Compat vDSO mapped to ffffe000.
[ 12.298642] Remapping vsyscall page to ffffe000
[ 12.298652] Checking 'hlt' instruction... OK.
[ 12.314517] SMP alternatives: switching to UP code
[ 12.314699] Freeing SMP alternatives: 11k freed
[ 12.314929] Early unpacking initramfs... done
[ 12.670523] ACPI: Core revision 20060707
[ 12.673499] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[ 12.678487] CPU0: AMD Mobile AMD Sempron(tm) Processor 2800+ stepping 00
[ 12.678508] Total of 1 processors activated (3203.47 BogoMIPS).
[ 12.678680] ENABLING IO-APIC IRQs
[ 12.678878] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 12.718548] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[ 12.718598] ...trying to set up timer (IRQ0) through the 8259A ... failed.
[ 12.718601] ...trying to set up timer as Virtual Wire IRQ... works.
[ 12.865611] Brought up 1 CPUs
[ 12.865834] Booting paravirtualized kernel on bare hardware
[ 12.865922] Time: 8:19:42 Date: 04/15/107
[ 12.865952] NET: Registered protocol family 16
[ 12.866041] EISA bus registered
[ 12.866045] ACPI: bus type pci registered
[ 12.878662] PCI: PCI BIOS revision 2.10 entry at 0xfd63c, last bus=6
[ 12.878665] PCI: Using configuration type 1
[ 12.878667] Setting up standard PCI resources
[ 12.884098] ACPI: Interpreter enabled
[ 12.884102] ACPI: Using IOAPIC for interrupt routing
[ 12.884643] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 12.884648] PCI: Probing PCI hardware (bus 00)
[ 12.886542] Boot video device is 0000:01:00.0
[ 12.887301] PCI: Transparent bridge - 0000:00:14.4
[ 12.887374] PCI: Bus #07 (-#08) is hidden behind transparent bridge #06 (-#06) (try 'pci=assign-busses')
[ 12.887377] Please report the result to linux-kernel to fix this permanently
[ 12.887411] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 12.891496] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
[ 12.891758] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
[ 12.892014] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
[ 12.892275] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
[ 12.892532] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
[ 12.892789] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
[ 12.893046] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
[ 12.893304] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
[ 12.929179] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT]
[ 12.929404] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB7_._PRT]
[ 12.929710] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[ 12.930133] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 12.930777] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 12.930788] pnp: PnP ACPI init
[ 12.939874] pnp: PnP ACPI: found 11 devices
[ 12.939879] PnPBIOS: Disabled by ACPI PNP
[ 12.939934] PCI: Using ACPI for IRQ routing
[ 12.939937] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 12.939945] PCI: Cannot allocate resource region 7 of bridge 0000:00:06.0
[ 12.939948] PCI: Cannot allocate resource region 8 of bridge 0000:00:06.0
[ 12.939951] PCI: Cannot allocate resource region 7 of bridge 0000:00:07.0
[ 12.939954] PCI: Cannot allocate resource region 8 of bridge 0000:00:07.0
[ 12.961144] NET: Registered protocol family 8
[ 12.961146] NET: Registered protocol family 20
[ 12.961426] pnp: 00:08: ioport range 0x1080-0x1080 has been reserved
[ 12.961430] pnp: 00:08: ioport range 0x1200-0x120f has been reserved
[ 12.961435] pnp: 00:08: ioport range 0x500-0x51f has been reserved
[ 12.961438] pnp: 00:08: ioport range 0x40b-0x40b has been reserved
[ 12.961700] PCI: Bridge: 0000:00:02.0
[ 12.961703] IO window: 9000-9fff
[ 12.961707] MEM window: c0100000-c01fffff
[ 12.961710] PREFETCH window: c8000000-cfffffff
[ 12.961713] PCI: Bridge: 0000:00:06.0
[ 12.961715] IO window: disabled.
[ 12.961718] MEM window: disabled.
[ 12.961720] PREFETCH window: disabled.
[ 12.961723] PCI: Bridge: 0000:00:07.0
[ 12.961724] IO window: disabled.
[ 12.961727] MEM window: disabled.
[ 12.961729] PREFETCH window: disabled.
[ 12.961740] PCI: Bus 7, cardbus bridge: 0000:06:06.0
[ 12.961742] IO window: 0000a400-0000a4ff
[ 12.961748] IO window: 0000a800-0000a8ff
[ 12.961754] PREFETCH window: 30000000-33ffffff
[ 12.961760] MEM window: 38000000-3bffffff
[ 12.961766] PCI: Bridge: 0000:00:14.4
[ 12.961770] IO window: a000-afff
[ 12.961777] MEM window: c0200000-c02fffff
[ 12.961782] PREFETCH window: 30000000-35ffffff
[ 12.961799] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 12.961806] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 12.961814] PCI: Setting latency timer of device 0000:00:07.0 to 64
[ 12.961845] ACPI: PCI Interrupt 0000:06:06.0[A] -> GSI 20 (level, low) -> IRQ 16
[ 12.961879] NET: Registered protocol family 2
[ 12.997459] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 12.997545] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 12.997668] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 12.997736] TCP: Hash tables configured (established 16384 bind 8192)
[ 12.997739] TCP reno registered
[ 13.009489] checking if image is initramfs... it is
[ 13.717076] Freeing initrd memory: 7003k freed
[ 13.717508] audit: initializing netlink socket (disabled)
[ 13.717522] audit(1179217182.556:1): initialized
[ 13.717634] VFS: Disk quotas dquot_6.5.1
[ 13.717652] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 13.717700] io scheduler noop registered
[ 13.717703] io scheduler anticipatory registered
[ 13.717705] io scheduler deadline registered
[ 13.717714] io scheduler cfq registered (default)
[ 14.147917] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 14.147938] assign_interrupt_mode Found MSI capability
[ 14.147941] Allocate Port Service[0000:00:02.0:pcie00]
[ 14.148005] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 14.148024] assign_interrupt_mode Found MSI capability
[ 14.148027] Allocate Port Service[0000:00:06.0:pcie00]
[ 14.148085] PCI: Setting latency timer of device 0000:00:07.0 to 64
[ 14.148105] assign_interrupt_mode Found MSI capability
[ 14.148107] Allocate Port Service[0000:00:07.0:pcie00]
[ 14.148222] isapnp: Scanning for PnP cards...
[ 14.502391] isapnp: No Plug & Play device found
[ 14.529050] Real Time Clock Driver v1.12ac
[ 14.529099] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 14.529382] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 14.529900] ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 17
[ 14.529910] ACPI: PCI interrupt for device 0000:00:14.6 disabled
[ 14.529980] mice: PS/2 mouse device common for all mice
[ 14.530491] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 14.530635] input: Macintosh mouse button emulation as /class/input/input0
[ 14.530670] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 14.530674] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 14.530944] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 14.531182] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 14.531259] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 14.531263] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 14.531266] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 14.531269] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 14.531272] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 14.531387] EISA: Probing bus 0 at eisa.0
[ 14.531397] Cannot allocate resource for EISA slot 1
[ 14.531426] Cannot allocate resource for EISA slot 8
[ 14.531428] EISA: Detected 0 cards.
[ 14.561486] TCP cubic registered
[ 14.561493] NET: Registered protocol family 1
[ 14.561515] Using IPI No-Shortcut mode
[ 14.561591] ACPI: (supports S0 S3 S4 S5)
[ 14.561636] Magic number: 7:238:321
[ 14.561661] hash matches device ttyya
[ 14.561748] hash matches device tty46
[ 14.561770] hash matches device 0000:00:02.0
[ 14.562070] Freeing unused kernel memory: 328k freed
[ 14.563006] Time: tsc clocksource has been installed.
[ 14.563665] input: AT Translated Set 2 keyboard as /class/input/input1
[ 15.799464] Capability LSM initialized
[ 15.838149] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 3.128000] Time: acpi_pm clocksource has been installed.
[ 3.156000] ACPI: Thermal Zone [TZS0] (41 C)
[ 3.204000] ACPI: Thermal Zone [TZS1] (24 C)
[ 3.256000] ACPI: Thermal Zone [TZSV] (30 C)
[ 3.776000] usbcore: registered new interface driver usbfs
[ 3.776000] usbcore: registered new interface driver hub
[ 3.776000] usbcore: registered new device driver usb
[ 3.780000] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.780000] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 18
[ 3.780000] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 3.780000] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
[ 3.780000] ohci_hcd 0000:00:13.0: irq 18, io mem 0xc0000000
[ 3.840000] usb usb1: configuration #1 chosen from 1 choice
[ 3.840000] hub 1-0:1.0: USB hub found
[ 3.840000] hub 1-0:1.0: 4 ports detected
[ 3.884000] ieee1394: Initialized config rom entry `ip1394'
[ 3.944000] ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 18
[ 3.944000] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 3.944000] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
[ 3.944000] ohci_hcd 0000:00:13.1: irq 18, io mem 0xc0001000
[ 4.004000] usb usb2: configuration #1 chosen from 1 choice
[ 4.004000] hub 2-0:1.0: USB hub found
[ 4.004000] hub 2-0:1.0: 4 ports detected
[ 4.108000] ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 18
[ 4.108000] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 4.108000] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
[ 4.108000] ehci_hcd 0000:00:13.2: irq 18, io mem 0xc0002000
[ 4.108000] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 4.108000] usb usb3: configuration #1 chosen from 1 choice
[ 4.108000] hub 3-0:1.0: USB hub found
[ 4.108000] hub 3-0:1.0: 8 ports detected
[ 4.212000] ATIIXP: IDE controller at PCI slot 0000:00:14.1
[ 4.212000] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 19
[ 4.212000] ATIIXP: chipset revision 0
[ 4.212000] ATIIXP: not 100% native mode: will probe irqs later
[ 4.212000] ide0: BM-DMA at 0x8410-0x8417, BIOS settings: hda:DMA, hdb:pio
[ 4.212000] ide1: BM-DMA at 0x8418-0x841f, BIOS settings: hdc:DMA, hdd:pio
[ 4.212000] Probing IDE interface ide0...
[ 4.500000] hda: ST960821A, ATA DISK drive
[ 4.636000] usb 3-2: new high speed USB device using ehci_hcd and address 2
[ 4.768000] usb 3-2: configuration #1 chosen from 1 choice
[ 4.952000] usbcore: registered new interface driver libusual
[ 4.956000] SCSI subsystem initialized
[ 4.960000] Initializing USB Mass Storage driver...
[ 5.172000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 5.172000] Probing IDE interface ide1...
[ 5.256000] usb 2-2: new low speed USB device using ohci_hcd and address 2
[ 5.468000] usb 2-2: configuration #1 chosen from 1 choice
[ 5.468000] scsi0 : SCSI emulation for USB Mass Storage devices
[ 5.468000] usb-storage: device found at 2
[ 5.468000] usb-storage: waiting for device to settle before scanning
[ 5.468000] usbcore: registered new interface driver usb-storage
[ 5.468000] USB Mass Storage support registered.
[ 5.480000] usbcore: registered new interface driver hiddev
[ 5.484000] input: Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0 as /class/input/input2
[ 5.484000] input: USB HID v1.10 Mouse [Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0] on usb-0000:00:13.1-2
[ 5.484000] usbcore: registered new interface driver usbhid
[ 5.484000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 5.912000] hdc: Slimtype DVDRW SOSW-833S, ATAPI CD/DVD-ROM drive
[ 6.584000] ide1 at 0x170-0x177,0x376 on irq 15
[ 6.588000] libata version 2.20 loaded.
[ 6.592000] ACPI: PCI Interrupt 0000:06:06.2[C] -> GSI 22 (level, low) -> IRQ 20
[ 6.644000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[c0208000-c02087ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 6.644000] r8169 Gigabit Ethernet driver 2.2LK loaded
[ 6.644000] ACPI: PCI Interrupt 0000:06:07.0[A] -> GSI 23 (level, low) -> IRQ 22
[ 6.644000] eth0: RTL8169sb/8110sb at 0xe084e400, 00:0a:e4:e1:26:cd, IRQ 22
[ 6.652000] hda: max request size: 512KiB
[ 6.664000] hda: 117210240 sectors (60011 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100)
[ 6.664000] hda: cache flushes supported
[ 6.664000] hda: hda1 hda2 < hda5 >
[ 6.724000] hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
[ 6.724000] Uniform CD-ROM driver Revision: 3.20
[ 6.896000] Attempting manual resume
[ 6.896000] swsusp: Resume From Partition 3:5
[ 6.896000] PM: Checking swsusp image.
[ 6.896000] PM: Resume from disk failed.
[ 6.944000] kjournald starting. Commit interval 5 seconds
[ 6.944000] EXT3-fs: mounted filesystem with ordered data mode.
[ 7.916000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[1234567812345678]
[ 10.468000] usb-storage: device scan complete
[ 10.468000] scsi 0:0:0:0: Direct-Access Seagate External Drive PQ: 0 ANSI: 0
[ 18.004000] r8169: eth0: link down
[ 19.240000] NET: Registered protocol family 17
[ 19.868000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 19.872000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 19.924000] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
[ 20.428000] Linux agpgart interface v0.102 (c) Dave Jones
[ 20.516000] ieee80211_crypt: registered algorithm 'NULL'
[ 20.520000] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 20.520000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <email address hidden>
[ 20.584000] ACPI: PCI Interrupt 0000:06:06.3[A] -> GSI 20 (level, low) -> IRQ 16
[ 20.632000] tifm_7xx1: ms card detected in socket 2
[ 20.724000] sdhci: Secure Digital Host Controller Interface driver
[ 20.724000] sdhci: Copyright(c) Pierre Ossman
[ 20.724000] sdhci: SDHCI controller found at 0000:06:06.4 [104c:8034] (rev 0)
[ 20.724000] ACPI: PCI Interrupt 0000:06:06.4[A] -> GSI 20 (level, low) -> IRQ 16
[ 20.724000] mmc0: SDHCI at 0xc0209000 irq 16 DMA
[ 20.728000] mmc1: SDHCI at 0xc0208c00 irq 16 DMA
[ 20.728000] mmc2: SDHCI at 0xc0208800 irq 16 DMA
[ 20.976000] Yenta: CardBus bridge found at 0000:06:06.0 [1025:0080]
[ 20.976000] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 20.976000] Yenta: Routing CardBus interrupts to PCI
[ 20.976000] Yenta TI: socket 0000:06:06.0, mfunc 0x010a1b22, devctl 0x64
[ 21.000000] bcm43xx driver
[ 21.008000] input: PC Speaker as /class/input/input3
[ 21.072000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x12a0b1, caps: 0xa04713/0x204000
[ 21.104000] input: SynPS/2 Synaptics TouchPad as /class/input/input4
[ 21.208000] Yenta: ISA IRQ mask 0x0ef8, PCI irq 16
[ 21.208000] Socket status: 30000006
[ 21.208000] Yenta: Raising subordinate bus# of parent bus (#06) from #06 to #08
[ 21.208000] pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff
[ 21.208000] cs: IO port probe 0xa000-0xafff: clean.
[ 21.208000] pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xc02fffff
[ 21.208000] pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x35ffffff
[ 21.208000] ACPI: PCI Interrupt 0000:06:05.0[A] -> GSI 21 (level, low) -> IRQ 21
[ 21.368000] ACPI: PCI Interrupt 0000:00:14.5[B] -> GSI 17 (level, low) -> IRQ 17
[ 21.412000] irda_init()
[ 21.412000] NET: Registered protocol family 23
[ 21.664000] SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB)
[ 21.672000] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 3.
[ 21.672000] nsc-ircc, chip->init
[ 21.672000] nsc-ircc, Found chip at base=0x02e
[ 21.672000] nsc-ircc, driver loaded (Dag Brattli)
[ 21.672000] nsc_ircc_open(), can't get iobase of 0x2f8
[ 21.672000] nsc-ircc, Found chip at base=0x02e
[ 21.672000] nsc-ircc, driver loaded (Dag Brattli)
[ 21.672000] nsc_ircc_open(), can't get iobase of 0x2f8
[ 21.672000] pnp: Device 00:0a disabled.
[ 21.672000] sda: Write Protect is off
[ 21.672000] sda: Mode Sense: 27 00 00 00
[ 21.672000] sda: assuming drive cache: write through
[ 21.684000] SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB)
[ 21.712000] sda: Write Protect is off
[ 21.712000] sda: Mode Sense: 27 00 00 00
[ 21.712000] sda: assuming drive cache: write through
[ 21.712000] sda:<6>ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 17
[ 21.996000] cs: IO port probe 0x100-0x3af: clean.
[ 22.000000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 22.000000] cs: IO port probe 0x820-0x8ff: excluding 0x878-0x87f
[ 22.000000] cs: IO port probe 0xc00-0xcf7: excluding 0xc00-0xc07 0xc10-0xc17 0xc50-0xc57 0xc68-0xc6f 0xcd0-0xcdf
[ 22.004000] cs: IO port probe 0xa00-0xaff: clean.
[ 22.044000] MC'97 1 converters and GPIO not ready (0xff00)
[ 26.988000] sda1
[ 26.988000] sd 0:0:0:0: Attached scsi disk sda
[ 27.096000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 27.388000] fuse init (API version 7.8)
[ 27.452000] lp: driver loaded but no devices found
[ 27.508000] Adding 1510068k swap on /dev/disk/by-uuid/e3808f68-de56-4073-80ee-565ae724ad7b. Priority:-1 extents:1 across:1510068k
[ 27.640000] EXT3 FS on hda1, internal journal
[ 27.976000] acer_acpi: Acer Laptop ACPI Extras version 0.5
[ 27.980000] acer_acpi: Wireless value 0
[ 27.992000] acer_acpi: Wireless value 1
[ 32.264000] Using specific hotkey driver
[ 32.404000] input: Power Button (FF) as /class/input/input5
[ 32.408000] ACPI: Power Button (FF) [PWRF]
[ 32.448000] input: Lid Switch as /class/input/input6
[ 32.452000] ACPI: Lid Switch [LID0]
[ 32.496000] input: Sleep Button (CM) as /class/input/input7
[ 32.500000] ACPI: Sleep Button (CM) [SLPB]
[ 32.588000] ibm_acpi: ec object not found
[ 32.624000] ACPI: AC Adapter [ADP1] (off-line)
[ 32.652000] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 32.656000] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 33.116000] ACPI: Battery Slot [BAT0] (battery present)
[ 33.168000] ACPI: ACPI Dock Station Driver
[ 33.184000] pcc_acpi: loading...
[ 33.480000] powernow-k8: Found 1 Mobile AMD Sempron(tm) Processor 2800+ processors (version 2.00.00)
[ 33.480000] powernow-k8: 0 : fid 0x8 (1600 MHz), vid 0x8
[ 33.480000] powernow-k8: 1 : fid 0x0 (800 MHz), vid 0x13
[ 34.516000] ttyS1: LSR safety check engaged!
[ 35.772000] SoftMAC: Open Authentication completed with 00:14:51:71:64:b1
[ 36.588000] [drm] Initialized drm 1.1.0 20060810
[ 36.596000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 18 (level, low) -> IRQ 23
[ 36.600000] [drm] Initialized radeon 1.25.0 20060524 on minor 0
[ 37.476000] ppdev: user-space parallel port driver
[ 38.608000] [drm] Setting GART location based on new memory map
[ 38.608000] [drm] Loading R300 Microcode
[ 38.608000] [drm] writeback test succeeded in 1 usecs
[ 39.284000] apm: BIOS not found.
[ 39.528000] Bluetooth: Core ver 2.11
[ 39.528000] NET: Registered protocol family 31
[ 39.528000] Bluetooth: HCI device and connection manager initialized
[ 39.528000] Bluetooth: HCI socket layer initialized
[ 39.556000] Bluetooth: L2CAP ver 2.8
[ 39.556000] Bluetooth: L2CAP socket layer initialized
[ 39.568000] Bluetooth: RFCOMM socket layer initialized
[ 39.568000] Bluetooth: RFCOMM TTY layer initialized
[ 39.568000] Bluetooth: RFCOMM ver 1.8
[ 46.612000] NET: Registered protocol family 10
[ 46.612000] lo: Disabled Privacy Extensions
[ 46.612000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 56.912000] eth1: no IPv6 routers present
[ 99.196000] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 99.332000] SoftMAC: Open Authentication completed with 00:14:51:71:64:b1
[ 99.880000] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 102.540000] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 102.704000] SoftMAC: Open Authentication completed with 00:14:51:71:64:b1
[ 103.296000] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 103.440000] SoftMAC: Open Authentication completed with 00:14:51:71:64:b1
[ 104.040000] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 106.968000] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 107.456000] SoftMAC: Open Authentication completed with 00:14:51:71:64:b1
[ 107.612000] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 108.848000] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 109.128000] SoftMAC: Open Authentication completed with 00:14:51:71:64:b1
[ 109.688000] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 112.748000] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 113.260000] SoftMAC: Open Authentication completed with 00:14:51:71:64:b1
[ 113.268000] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 114.764000] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 115.276000] SoftMAC: Open Authentication completed with 00:14:51:71:64:b1
[ 115.316000] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 128.740000] eth1: no IPv6 routers present
[ 221.220000] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 288.304000] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 288.660000] SoftMAC: Open Authentication completed with 00:14:51:71:64:b1
[ 312.288000] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 322.444000] eth1: no IPv6 routers present
[ 324.368000] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 324.504000] SoftMAC: Open Authentication completed with 00:14:51:71:64:b1
[ 325.008000] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 328.640000] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 329.236000] SoftMAC: Open Authentication completed with 00:14:51:71:64:b1
[ 329.268000] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 330.656000] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 330.796000] SoftMAC: Open Authentication completed with 00:14:51:71:64:b1
[ 331.316000] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 335.148000] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 335.652000] SoftMAC: Open Authentication completed with 00:14:51:71:64:b1
[ 335.776000] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 340.688000] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 340.824000] SoftMAC: Open Authentication completed with 00:14:51:71:64:b1
[ 341.192000] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 344.512000] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 346.712000] SoftMAC: Open Authentication completed with 00:14:51:71:64:b1
[ 346.720000] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 363.180000] eth1: no IPv6 routers present
[ 434.884000] SoftMAC: Open Authentication completed with 00:14:51:71:64:b1
[ 445.660000] eth1: no IPv6 routers present
[ 448.160000] atkbd.c: Unknown key pressed (translated set 2, code 0xf2 on isa0060/serio0).
[ 448.160000] atkbd.c: Use 'setkeycodes e072 <keycode>' to make it known.
[ 448.228000] atkbd.c: Unknown key released (translated set 2, code 0xf2 on isa0060/serio0).
[ 448.228000] atkbd.c: Use 'setkeycodes e072 <keycode>' to make it known.
[ 484.544000] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 485.048000] SoftMAC: Open Authentication completed with 00:14:51:71:64:b1
[ 485.104000] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 489.340000] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 489.848000] SoftMAC: Open Authentication completed with 00:14:51:71:64:b1
[ 489.984000] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 504.776000] eth1: no IPv6 routers present
[ 1424.656000] APIC error on CPU0: 00(40)
[ 1727.052000] APIC error on CPU0: 40(40)
[ 2016.012000] APIC error on CPU0: 40(40)
[ 3389.652000] APIC error on CPU0: 40(40)
[ 3996.168000] usb 3-3: new high speed USB device using ehci_hcd and address 4
[ 3996.300000] usb 3-3: configuration #1 chosen from 1 choice
[ 3996.300000] scsi1 : SCSI emulation for USB Mass Storage devices
[ 3996.300000] usb-storage: device found at 4
[ 3996.300000] usb-storage: waiting for device to settle before scanning
[ 4001.300000] usb-storage: device scan complete
[ 4001.300000] scsi 1:0:0:0: Direct-Access SanDisk Cruzer Micro 0.1 PQ: 0 ANSI: 2
[ 4001.304000] SCSI device sdb: 1000944 512-byte hdwr sectors (512 MB)
[ 4001.304000] sdb: Write Protect is off
[ 4001.304000] sdb: Mode Sense: 03 00 00 00
[ 4001.304000] sdb: assuming drive cache: write through
[ 4001.304000] SCSI device sdb: 1000944 512-byte hdwr sectors (512 MB)
[ 4001.308000] sdb: Write Protect is off
[ 4001.308000] sdb: Mode Sense: 03 00 00 00
[ 4001.308000] sdb: assuming drive cache: write through
[ 4001.308000] sdb: sdb1
[ 4001.308000] sd 1:0:0:0: Attached scsi removable disk sdb
[ 4001.308000] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 5872.120000] APIC error on CPU0: 40(40)
[ 7110.516000] APIC error on CPU0: 40(40)
[ 7427.680000] usb 3-2: USB disconnect, address 2
[ 7492.120000] APIC error on CPU0: 40(40)
[ 7512.844000] usb 3-2: new high speed USB device using ehci_hcd and address 5
[ 7512.976000] usb 3-2: configuration #1 chosen from 1 choice
[ 7512.976000] scsi2 : SCSI emulation for USB Mass Storage devices
[ 7512.976000] usb-storage: device found at 5
[ 7512.976000] usb-storage: waiting for device to settle before scanning
[ 7517.976000] usb-storage: device scan complete
[ 7517.976000] scsi 2:0:0:0: Direct-Access Seagate External Drive PQ: 0 ANSI: 0
[ 7517.980000] SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB)
[ 7517.980000] sda: Write Protect is off
[ 7517.980000] sda: Mode Sense: 27 00 00 00
[ 7517.980000] sda: assuming drive cache: write through
[ 7517.980000] SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB)
[ 7517.984000] sda: Write Protect is off
[ 7517.984000] sda: Mode Sense: 27 00 00 00
[ 7517.984000] sda: assuming drive cache: write through
[ 7517.984000] sda: sda1
[ 7523.240000] sd 2:0:0:0: Attached scsi disk sda
[ 7523.240000] sd 2:0:0:0: Attached scsi generic sg0 type 0

Here is gvm.log:

manager.c/647: setting[0]: bool: autobrowse = 1
manager.c/647: setting[1]: bool: autoburn = 1
manager.c/642: setting[2]: string: autoburn_audio_cd_command = serpentine
manager.c/642: setting[3]: string: autoburn_data_cd_command = nautilus --no-desktop burn:
manager.c/647: setting[4]: bool: autoipod = 1
manager.c/642: setting[5]: string: autoipod_command = rhythmbox
manager.c/647: setting[6]: bool: autokeyboard = 0
manager.c/642: setting[7]: string: autokeyboard_command =
manager.c/647: setting[8]: bool: automount_drives = 1
manager.c/647: setting[9]: bool: automount_media = 1
manager.c/647: setting[10]: bool: automouse = 0
manager.c/642: setting[11]: string: automouse_command =
manager.c/647: setting[12]: bool: autoopen = 0
manager.c/642: setting[13]: string: autoopen_path = .autoopen:autoopen
manager.c/647: setting[14]: bool: autophoto = 1
manager.c/642: setting[15]: string: autophoto_command = gnome-volume-manager-gthumb %h
manager.c/647: setting[16]: bool: autopalmsync = 0
manager.c/642: setting[17]: string: autopalmsync_command = gpilotd-control-applet
manager.c/647: setting[18]: bool: autoplay_cda = 1
manager.c/642: setting[19]: string: autoplay_cda_command = sound-juicer -d %d
manager.c/647: setting[20]: bool: autoplay_dvd = 1
manager.c/642: setting[21]: string: autoplay_dvd_command = totem %m
manager.c/647: setting[22]: bool: autoplay_vcd = 1
manager.c/642: setting[23]: string: autoplay_vcd_command = totem %m
manager.c/647: setting[24]: bool: autopocketpc = 0
manager.c/642: setting[25]: string: autopocketpc_command = multisync
manager.c/647: setting[26]: bool: autoprinter = 0
manager.c/642: setting[27]: string: autoprinter_command = gnome-cups-add hal://%h
manager.c/647: setting[28]: bool: autorun = 0
manager.c/642: setting[29]: string: autorun_path = .autorun:autorun:autorun.sh
manager.c/647: setting[30]: bool: autotablet = 0
manager.c/642: setting[31]: string: autotablet_command =
manager.c/656: settings[32]: float: percent_threshold = 0,050000
manager.c/656: settings[33]: float: percent_used = 0,010000
manager.c/3018: mount_all: mounting /dev/sdb1
manager.c/1783: mounting /org/freedesktop/Hal/devices/volume_uuid_3B69_1AFD...
manager.c/798: executing command: /usr/bin/gnome-mount --no-ui --hal-udi=/org/freedesktop/Hal/devices/volume_uuid_3B69_1AFD
gnome-mount 0.5
manager.c/2678: Mounted: /org/freedesktop/Hal/devices/volume_uuid_3B69_1AFD
manager.c/3302: gvm_user_active_at_console: check-foreground-console returned with 0
manager.c/2536: Device added: /org/freedesktop/Hal/devices/usb_device_bc2_503__SG062702940
manager.c/3302: gvm_user_active_at_console: check-foreground-console returned with 0
manager.c/2536: Device added: /org/freedesktop/Hal/devices/usb_device_bc2_503__SG062702940_if0
manager.c/3302: gvm_user_active_at_console: check-foreground-console returned with 0
manager.c/2536: Device added: /org/freedesktop/Hal/devices/usb_device_bc2_503__SG062702940_usbraw

Here is lshal.txt:

Dumping 117 device(s) from the Global Device List:
-------------------------------------------------
udi = '/org/freedesktop/Hal/devices/computer'
  info.addons = {'hald-addon-cpufreq', 'hald-addon-acpi'} (string list)
  info.bus = 'unknown' (string)
  info.callouts.add = {'hal-storage-cleanup-all-mountpoints'} (string list)
  info.capabilities = {'cpufreq_control'} (string list)
  info.interfaces = {'org.freedesktop.Hal.Device.SystemPowerManagement', 'org.freedesktop.Hal.Device.CPUFreq'} (string list)
  info.product = 'Computer' (string)
  info.subsystem = 'unknown' (string)
  info.udi = '/org/freedesktop/Hal/devices/computer' (string)
  org.freedesktop.Hal.Device.SystemPowerManagement.method_argnames = {'num_seconds_to_sleep', 'num_seconds_to_sleep', '', '', '', 'enable_power_save'} (string list)
  org.freedesktop.Hal.Device.SystemPowerManagement.method_execpaths = {'hal-system-power-suspend', 'hal-system-power-suspend-hybrid', 'hal-system-power-hibernate', 'hal-system-power-shutdown', 'hal-system-power-reboot', 'hal-system-power-set-power-save'} (string list)
  org.freedesktop.Hal.Device.SystemPowerManagement.method_names = {'Suspend', 'SuspendHybrid', 'Hibernate', 'Shutdown', 'Reboot', 'SetPowerSave'} (string list)
  org.freedesktop.Hal.Device.SystemPowerManagement.method_signatures = {'i', 'i', '', '', '', 'b'} (string list)
  power_management.acpi.linux.version = '20060707' (string)
  power_management.can_hibernate = true (bool)
  power_management.can_suspend = true (bool)
  power_management.can_suspend_hybrid = false (bool)
  power_management.can_suspend_to_disk = true (bool)
  power_management.can_suspend_to_ram = true (bool)
  power_management.is_powersave_set = false (bool)
  power_management.type = 'acpi' (string)
  smbios.bios.release_date = '05/26/2005' (string)
  smbios.bios.vendor = 'Phoenix' (string)
  smbios.bios.version = 'V1.09' (string)
  smbios.chassis.manufacturer = 'N/A' (string)
  smbios.chassis.type = 'Notebook' (string)
  smbios.system.manufacturer = 'Acer' (string)
  smbios.system.product = 'Aspire 3020' (string)
  smbios.system.serial = 'LXA490504452400C73KS00' (string)
  smbios.system.uuid = 'D3789FE0-DDC5-11D9-AE10-E8DF52C1F735' (string)
  smbios.system.version = '-1' (string)
  system.chassis.manufacturer = 'N/A' (string)
  system.chassis.type = 'Notebook' (string)
  system.firmware.release_date = '05/26/2005' (string)
  system.firmware.vendor = 'Phoenix' (string)
  system.firmware.version = 'V1.09' (string)
  system.formfactor = 'laptop' (string)
  system.hardware.product = 'Aspire 3020' (string)
  system.hardware.serial = 'LXA490504452400C73KS00' (string)
  system.hardware.uuid = 'D3789FE0-DDC5-11D9-AE10-E8DF52C1F735' (string)
  system.hardware.vendor = 'Acer' (string)
  system.hardware.version = '-1' (string)
  system.kernel.machine = 'i686' (string)
  system.kernel.name = 'Linux' (string)
  system.kernel.version = '2.6.20-15-generic' (string)
  system.product = 'Aspire 3020 -1' (string)
  system.vendor = 'Acer' (string)

udi = '/org/freedesktop/Hal/devices/platform_bluetooth'
  info.bus = 'platform' (string)
  info.parent = '/org/freedesktop/Hal/devices/computer' (string)
  info.product = 'Platform Device (bluetooth)' (string)
  info.subsystem = 'platform' (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_bluetooth' (string)
  linux.hotplug_type = 2 (0x2) (int)
  linux.subsystem = 'platform' (string)
  linux.sysfs_path = '/sys/devices/platform/bluetooth' (string)
  platform.id = 'bluetooth' (string)

udi = '/org/freedesktop/Hal/devices/acpi_ADP1'
  ac_adapter.present = true (bool)
  info.capabilities = {'ac_adapter'} (string list)
  info.category = 'ac_adapter' (string)
  info.parent = '/org/freedesktop/Hal/devices/computer' (string)
  info.product = 'AC Adapter' (string)
  info.udi = '/org/freedesktop/Hal/devices/acpi_ADP1' (string)
  linux.acpi_path = '/proc/acpi/ac_adapter/ADP1' (string)
  linux.acpi_type = 3 (0x3) (int)
  linux.hotplug_type = 4 (0x4) (int)

udi = '/org/freedesktop/Hal/devices/acpi_CPU0'
  info.capabilities = {'processor'} (string list)
  info.category = 'processor' (string)
  info.parent = '/org/freedesktop/Hal/devices/computer' (string)
  info.product = 'Mobile AMD Sempron(tm) Processor 2800+' (string)
  info.udi = '/org/freedesktop/Hal/devices/acpi_CPU0' (string)
  linux.acpi_path = '/proc/acpi/processor/CPU0' (string)
  linux.acpi_type = 1 (0x1) (int)
  linux.hotplug_type = 4 (0x4) (int)
  processor.can_throttle = false (bool)
  processor.number = 0 (0x0) (int)

udi = '/org/freedesktop/Hal/devices/acpi_BAT0'
  battery.charge_level.capacity_state = 'ok' (string)
  battery.charge_level.current = 10686 (0x29be) (int)
  battery.charge_level.design = 14383 (0x382f) (int)
  battery.charge_level.granularity_1 = 209 (0xd1) (int)
  battery.charge_level.granularity_2 = 10163 (0x27b3) (int)
  battery.charge_level.last_full = 10686 (0x29be) (int)
  battery.charge_level.low = 313 (0x139) (int)
  battery.charge_level.percentage = 100 (0x64) (int)
  battery.charge_level.rate = 0 (0x0) (int)
  battery.charge_level.unit = 'mWh' (string)
  battery.charge_level.warning = 523 (0x20b) (int)
  battery.is_rechargeable = true (bool)
  battery.model = 'Bat 8Cell' (string)
  battery.present = true (bool)
  battery.rechargeable.is_charging = false (bool)
  battery.rechargeable.is_discharging = false (bool)
  battery.reporting.current = 3269 (0xcc5) (int)
  battery.reporting.design = 4400 (0x1130) (int)
  battery.reporting.granularity_1 = 64 (0x40) (int)
  battery.reporting.granularity_2 = 3109 (0xc25) (int)
  battery.reporting.last_full = 3269 (0xcc5) (int)
  battery.reporting.low = 96 (0x60) (int)
  battery.reporting.rate = 0 (0x0) (int)
  battery.reporting.technology = 'LION' (string)
  battery.reporting.unit = 'mAh' (string)
  battery.reporting.warning = 160 (0xa0) (int)
  battery.serial = '32101' (string)
  battery.technology = 'lithium-ion' (string)
  battery.type = 'primary' (string)
  battery.vendor = 'Acer' (string)
  battery.voltage.current = 16752 (0x4170) (int)
  battery.voltage.design = 3269 (0xcc5) (int)
  battery.voltage.unit = 'mV' (string)
  info.capabilities = {'battery'} (string list)
  info.category = 'battery' (string)
  info.parent = '/org/freedesktop/Hal/devices/computer' (string)
  info.product = 'Battery Bay' (string)
  info.udi = '/org/freedesktop/Hal/devices/acpi_BAT0' (string)
  linux.acpi_path = '/proc/acpi/battery/BAT0' (string)
  linux.acpi_type = 0 (0x0) (int)
  linux.hotplug_type = 4 (0x4) (int)

udi = '/org/freedesktop/Hal/devices/computer_alsa_timer'
  alsa.device_file = '/dev/snd/timer' (string)
  alsa.type = 'timer' (string)
  info.capabilities = {'alsa'} (string list)
  info.category = 'alsa' (string)
  info.parent = '/org/freedesktop/Hal/devices/computer' (string)
  info.product = 'ALSA Timer Device' (string)
  info.udi = '/org/freedesktop/Hal/devices/computer_alsa_timer' (string)
  linux.device_file = '/dev/snd/timer' (string)
  linux.hotplug_type = 2 (0x2) (int)
  linux.subsystem = 'sound' (string)
  linux.sysfs_path = '/sys/class/sound/timer' (string)

udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer_0'
  info.capabilities = {'oss'} (string list)
  info.category = 'oss' (string)
  info.parent = '/org/freedesktop/Hal/devices/computer' (string)
  info.product = 'OSS Sequencer Device' (string)
  info.udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer_0' (string)
  linux.device_file = '/dev/sequencer2' (string)
  linux.hotplug_type = 2 (0x2) (int)
  linux.subsystem = 'sound' (string)
  linux.sysfs_path = '/sys/class/sound/sequencer2' (string)
  oss.device_file = '/dev/sequencer2' (string)
  oss.type = 'sequencer' (string)

udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer'
  info.capabilities = {'oss'} (string list)
  info.category = 'oss' (string)
  info.parent = '/org/freedesktop/Hal/devices/computer' (string)
  info.product = 'OSS Sequencer Device' (string)
  info.udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer' (string)
  linux.device_file = '/dev/sequencer' (string)
  linux.hotplug_type = 2 (0x2) (int)
  linux.subsystem = 'sound' (string)
  linux.sysfs_path = '/sys/class/sound/sequencer' (string)
  oss.device_file = '/dev/sequencer' (string)
  oss.type = 'sequencer' (string)

udi = '/org/freedesktop/Hal/devices/computer_alsa_sequencer'
  alsa.device_file = '/dev/snd/seq' (string)
  alsa.type = 'sequencer' (string)
  info.capabilities = {'alsa'} (string list)
  info.category = 'alsa' (string)
  info.parent = '/org/freedesktop/Hal/devices/computer' (string)
  info.product = 'ALSA Sequencer Device' (string)
  info.udi = '/org/freedesktop/Hal/devices/computer_alsa_sequencer' (string)
  linux.device_file = '/dev/snd/seq' (string)
  linux.hotplug_type = 2 (0x2) (int)
  linux.subsystem = 'sound' (string)
  linux.sysfs_path = '/sys/class/sound/seq' (string)

udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_2'
  button.has_state = false (bool)
  button.type = 'sleep' (string)
  info.addons = {'hald-addon-keyboard'} (string list)
  info.capabilities = {'input', 'button'} (string list)
  info.category = 'input' (string)
  info.parent = '/org/freedesktop/Hal/devices/computer' (string)
  info.product = 'Sleep Button (CM)' (string)
  info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_2' (string)
  input.device = '/dev/input/event7' (string)
  input.product = 'Sleep Button (CM)' (string)
  linux.device_file = '/dev/input/event7' (string)
  linux.hotplug_type = 2 (0x2) (int)
  linux.subsystem = 'input' (string)
  linux.sysfs_path = '/sys/class/input/input7/event7' (string)

udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_1'
  button.has_state = true (bool)
  button.state.value = false (bool)
  button.type = 'lid' (string)
  info.addons = {'hald-addon-keyboard'} (string list)
  info.capabilities = {'input', 'input.switch', 'button'} (string list)
  info.category = 'input' (string)
  info.parent = '/org/freedesktop/Hal/devices/computer' (string)
  info.product = 'Lid Switch' (string)
  info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_1' (string)
  input.device = '/dev/input/event6' (string)
  input.product = 'Lid Switch' (string)
  linux.device_file = '/dev/input/event6' (string)
  linux.hotplug_type = 2 (0x2) (int)
  linux.subsystem = 'input' (string)
  linux.sysfs_path = '/sys/class/input/input6/event6' (string)

udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_0'
  button.has_state = false (bool)
  button.type = 'power' (string)
  info.addons = {'hald-addon-keyboard'} (string list)
  info.capabilities = {'input', 'button'} (string list)
  info.category = 'input' (string)
  info.parent = '/org/freedesktop/Hal/devices/computer' (string)
  info.product = 'Power Button (FF)' (string)
  info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_0' (string)
  input.device = '/dev/input/event5' (string)
  input.product = 'Power Button (FF)' (string)
  linux.device_file = '/dev/input/event5' (string)
  linux.hotplug_type = 2 (0x2) (int)
  linux.subsystem = 'input' (string)
  linux.sysfs_path = '/sys/class/input/input5/event5' (string)

udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input'
  info.capabilities = {'input', 'input.mouse'} (string list)
  info.category = 'input' (string)
  info.parent = '/org/freedesktop/Hal/devices/computer' (string)
  info.product = 'Macintosh mouse button emulation' (string)
  info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input' (string)
  input.device = '/dev/input/event0' (string)
  input.product = 'Macintosh mouse button emulation' (string)
  linux.device_file = '/dev/input/event0' (string)
  linux.hotplug_type = 2 (0x2) (int)
  linux.subsystem = 'input' (string)
  linux.sysfs_path = '/sys/class/input/input0/event0' (string)

udi = '/org/freedesktop/Hal/devices/pnp_NSC6001'
  info.bus = 'pnp' (string)
  info.parent = '/org/freedesktop/Hal/devices/computer' (string)
  info.product = 'PnP Device (NSC6001)' (string)
  info.subsystem = 'pnp' (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_NSC6001' (string)
  linux.hotplug_type = 2 (0x2) (int)
  linux.subsystem = 'pnp' (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:0a' (string)
  pnp.id = 'NSC6001' (string)

udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01'
  info.bus = 'pnp' (string)
  info.linux.driver = 'system' (string)
  info.parent = '/org/freedesktop/Hal/devices/computer' (string)
  info.product = 'System Board' (string)
  info.subsystem = 'pnp' (string)
  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01' (string)
  linux.hotplug_type = 2 (0x2) (int)
  linux.subsystem = 'pnp' (string)
  linux.sysfs_path = '/sys/devices/pnp0/00:09' (string)
  pnp.description = 'System Board' (string)
  pnp.id = 'PNP0c01' (string)

udi = '/org/freedesktop/Hal/devices

[rothchild (marc-rothera)]

I have this problem too as do many others it seems, I think this bug should be merged with #102097 perhaps?

Child

[fussi68 (busmarkus)]

I have the same problem since i use Feisty. I have tested two different Toshiba drives with several file systems and interfaces.
Automount doesn't work at all and when i manually mount the drives, they are write protected.

Anyway, thank you for working on (k)ubuntu...

[Duncan Lithgow (duncan-lithgow)]

Could one/ some of you try this with a live CD of Ubuntu 7.10 (Gutsy Gibbon) http://cdimage.ubuntu.com/releases/gutsy/tribe-4/

Let us know if the problem persists.

[rothchild (marc-rothera)]

Duncan I didn't clock that your request came from this thread I posted my response in this one #102097 https://bugs.launchpad.net/ubuntu/+source/hal/+bug/102097/comments/19

The short version is that auto-mounting still did not work under Tribe4 I am downloading Tribe 5 right now to test and will feedback to both threads of this bug report.

Please let me know if there is any other info I should submit to help get this bug squashed asap?

Child

[rothchild (marc-rothera)]

My USB hard drive is still not being auto-mounted with Kubuntu Gutsy Tribe 5 i386 (running live)

If I do fdisk-l I can see it but no automagic happening

:-(

Child

[rothchild (marc-rothera)]

There's been a change although not for the better!

Yesterday I upgraded one of my feisty boxen to gutsy (as usb automount doesn't work on either I may as well have the newer version to see what is going on and gutsy is due soon) upon installation / upgrade yesterday I was able to mount my drive with 'pmount-hal sdb1' and read from it.

I noticed that in todays update there were some hal related packages so I decided to try my drive again, firstly no automagic but secondly (and perhaps more seriously) I now get an error when issuing the pmount command.

:~$ fdisk -l

Disk /dev/sdb: 320.0 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x170a8ae2

   Device Boot Start End Blocks Id System
/dev/sdb1 * 1 38913 312568641 c W95 FAT32 (LBA)

:~$ pmount-hal sdb1
process 5387: arguments to dbus_message_new_method_call() were incorrect, assertion "_dbus_check_is_valid_path (path)" failed in file dbus-message.c line 1074.
This is normally a bug in some application using the D-Bus library.
libhal.c 1122 : Couldn't allocate D-BUS message
process 5387: arguments to dbus_message_new_method_call() were incorrect, assertion "_dbus_check_is_valid_path (path)" failed in file dbus-message.c line 1074.
This is normally a bug in some application using the D-Bus library.
libhal.c 1122 : Couldn't allocate D-BUS message
Error: given UDI is not a mountable volume

Child

[rothchild (marc-rothera)]

I followed the guide here: https://wiki.ubuntu.com/DebuggingRemovableDevices

And posted my results here: https://bugs.launchpad.net/ubuntu/+bug/130367

I'm now having trouble with USB Keys as well as the removable drive.

Bang up to date Gutsy

Child

[rothchild (marc-rothera)]

All is well (for me at least), USB automounting now working properly for both hard-drive and pendrives.

Thankyou Ubuntu Devs

Child

[xteejx (xteejx-deactivatedaccount)]

Thank you for taking the time to report this bug and helping to make Ubuntu better. You reported this bug a while ago and there hasn't been any activity in it recently. We were wondering if this is still an issue for you. Can you try with the latest Ubuntu release? Thanks in advance.

[rothchild (marc-rothera)]

Hi Teej

I've not had this problem since Nov 07 and no one else has posted here so I'm thinking this is safe to close.

Ta
Child

[xteejx (xteejx-deactivatedaccount)]

Thanks rothchild. Feel free to report any other bugs you find. :)