Battery not detected by Guidance and KPowerSave in Feisty

[timur]

Binary package hint: hal

I am using Kubuntu 7.04, upgrade from 6.10, all packages updated, on HP nx6110 laptop.
I tried Klaptop, Guidance and KPowersave and each has a problem. Only Klaptop detects the power/battery. Guidance and KPowersave cannot be configured (option are grayed out). They don't detect power/battery status nor they display remaining battery time. Only after I installed uswsusp hibernation started to work and after I configured CPU Module for p4_clockmod Guidance shows CPU frequency. But the battery remains the problem so I use Klaptop.
BTW, on SUSE 10.2 on the same macine, KPowersave works fine.

t@KUBUNTU:~/temp$ id hal
id: hal: No such user
t@KUBUNTU:~/temp$ id haldaemon
uid=106(haldaemon) gid=110(haldaemon) groups=110(haldaemon),24(cdrom),25(floppy),46(plugdev),126(powerdev)
t@KUBUNTU:~/temp$

t@KUBUNTU:~$ acpi
     Battery 1: charged, 99%

t@KUBUNTU:~$ lshal|grep -i battery
t@KUBUNTU:~$

t@KUBUNTU:~$ dmesg|grep -i acpi
[ 0.000000] BIOS-e820: 000000001f7efc00 - 000000001f7fb000 (ACPI NVS)
[ 0.000000] ACPI: RSDP (v000 HP ) @ 0x000fe270
[ 0.000000] ACPI: RSDT (v001 HP 099C 0x20040620 HP 0x00000001) @ 0x1f7efc84
[ 0.000000] ACPI: FADT (v002 HP 099C 0x00000002 HP 0x00000001) @ 0x1f7efc00
[ 0.000000] ACPI: MADT (v001 HP 099C 0x00000001 HP 0x00000001) @ 0x1f7efcb4
[ 0.000000] ACPI: MCFG (v001 HP 099C 0x00000001 HP 0x00000001) @ 0x1f7efd10
[ 0.000000] ACPI: DSDT (v001 HP DAU00 0x00010000 MSFT 0x0100000e) @ 0x00000000
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfec01000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 15.675887] ACPI: Core revision 20060707
[ 15.676811] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[ 15.891409] ACPI: bus type pci registered
[ 15.917645] ACPI: Interpreter enabled
[ 15.917649] ACPI: Using IOAPIC for interrupt routing
[ 15.918051] ACPI: PCI Root Bridge [C002] (0000:00)
[ 15.918082] ACPI: Assume root bridge [\_SB_.C002] bus is 0
[ 15.923274] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 15.923863] ACPI: PCI Interrupt Routing Table [\_SB_.C002._PRT]
[ 15.964233] ACPI: PCI Interrupt Routing Table [\_SB_.C002.C068._PRT]
[ 15.980794] ACPI: Power Resource [C1C5] (on)
[ 15.984691] ACPI: PCI Interrupt Link [C0D8] (IRQs 10 *11)
[ 15.985261] ACPI: PCI Interrupt Link [C0D9] (IRQs *10 11)
[ 15.985829] ACPI: PCI Interrupt Link [C0DA] (IRQs *10 11)
[ 15.986399] ACPI: PCI Interrupt Link [C0DB] (IRQs *10 11)
[ 15.986976] ACPI: PCI Interrupt Link [C0EE] (IRQs *10 11)
[ 15.987542] ACPI: PCI Interrupt Link [C0EF] (IRQs 10 *11)
[ 15.988107] ACPI: PCI Interrupt Link [C0F0] (IRQs *10 11)
[ 15.988668] ACPI: PCI Interrupt Link [C0F1] (IRQs 10 11) *0, disabled.
[ 15.990693] ACPI: Power Resource [C248] (off)
[ 15.990896] ACPI: Power Resource [C249] (off)
[ 15.991062] ACPI: Power Resource [C24A] (off)
[ 15.991225] ACPI: Power Resource [C24B] (off)
[ 15.991568] pnp: PnP ACPI init
[ 16.001481] pnp: PnP ACPI: found 11 devices
[ 16.001487] PnPBIOS: Disabled by ACPI PNP
[ 16.001537] PCI: Using ACPI for IRQ routing
[ 16.064209] ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 18 (level, low) -> IRQ 16
[ 17.375938] ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 22 (level, low) -> IRQ 17
[ 17.375948] ACPI: PCI interrupt for device 0000:00:1e.3 disabled
[ 17.410275] ACPI: (supports S0 S3 S4 S5)
[ 18.692735] ACPI: Transitioning device [C24C] to D3
[ 18.692739] ACPI: Transitioning device [C24C] to D3
[ 18.692743] ACPI: Fan [C24C] (off)
[ 18.692989] ACPI: Transitioning device [C24D] to D3
[ 18.692991] ACPI: Transitioning device [C24D] to D3
[ 18.692995] ACPI: Fan [C24D] (off)
[ 18.693239] ACPI: Transitioning device [C24E] to D3
[ 18.693241] ACPI: Transitioning device [C24E] to D3
[ 18.693245] ACPI: Fan [C24E] (off)
[ 18.693488] ACPI: Transitioning device [C24F] to D3
[ 18.693491] ACPI: Transitioning device [C24F] to D3
[ 18.693494] ACPI: Fan [C24F] (off)
[ 18.700378] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 18.700384] ACPI: Processor [C000] (supports 8 throttling states)
[ 18.724415] ACPI: Thermal Zone [TZ1] (61 C)
[ 18.739257] ACPI: Thermal Zone [TZ2] (48 C)
[ 3.468000] ACPI: Thermal Zone [TZ3] (31 C)
[ 3.472000] Time: acpi_pm clocksource has been installed.
[ 3.472000] ACPI: Thermal Zone [TZ4] (30 C)
[ 4.664000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 18
[ 4.768000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 19
[ 4.872000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 16
[ 4.976000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 20
[ 5.080000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 18
[ 5.188000] ACPI: PCI Interrupt 0000:02:06.2[C] -> GSI 22 (level, low) -> IRQ 17
[ 5.252000] ACPI: PCI Interrupt 0000:02:0e.0[A] -> GSI 16 (level, low) -> IRQ 21
[ 5.272000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 21
[ 27.348000] ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 22 (level, low) -> IRQ 17
[ 28.232000] ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 21 (level, low) -> IRQ 22
[ 29.052000] ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 21 (level, low) -> IRQ 22
[ 47.448000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 21
[ 61.492000] ACPI: AC Adapter [C172] (on-line)
[ 61.568000] ACPI: Battery Slot [C174] (battery present)
[ 61.568000] ACPI: Battery Slot [C173] (battery absent)
[ 61.692000] ACPI: Power Button (FF) [PWRF]
[ 61.732000] ACPI: Sleep Button (CM) [C1E8]
[ 61.752000] ACPI: Lid Switch [C1E9]
[ 62.316000] ibm_acpi: ec object not found
[ 62.428000] ACPI: Video Device [C055] (multi-head: yes rom: no post: no)
[ 62.460000] pcc_acpi: loading...

[timur (ba.timur)]

sorry for the long post, please cut it.

[timur (ba.timur)]

this seems to be the same as:
https://launchpad.net/ubuntu/+source/gnome-power-manager/+bug/39413

[xteejx (xteejx-deactivatedaccount)]

Thank you for taking the time to report this bug and helping to make Ubuntu better. You reported this bug a while ago and there hasn't been any activity in it recently. We were wondering if this is still an issue for you. Can you try with the latest Ubuntu release? Thanks in advance.

[Jonathan Thomas (echidnaman)]

We are closing this bug report because it lacks the information we need to investigate the problem, as described in the previous comments. Please reopen it if you can give us the missing information, and don't hesitate to submit bug reports in the future. To reopen the bug report you can click on the current status, under the Status column, and change the Status back to "New". Thanks again!

[timur (ba.timur)]

I'm upgrading regularly, so I'm now at Jaunty. There is no problem, battery works fine. Sorry for the delay.

[xteejx (xteejx-deactivatedaccount)]

Thank you for the update. We are now marking this bug as fixed released as per your comment about this being fixed in the latest release of Ubuntu.