Gigabyte MA790FX DS5 m/board Athlon XP 2.8Ghz D/Core CPU 2GB DDR2 RAM Asus ATI HD2600 Pro 512MB video 1 pata & 4 sata drives (2600 GB) 2 DVD burners 2 x 19" LCD monitors -------------------------------------------- dmesg 16 [ 36.930917] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 36.931114] eth0: RTL8168b/8111b at 0xf884a000, 00:1d:7d:01:10:c1, XID 38000000 IRQ 219 [ 36.938763] SCSI subsystem initialized [ 36.971131] libata version 3.00 loaded. [ 36.975216] ahci 0000:00:12.0: version 3.0 [ 36.974625] usbcore: registered new interface driver usbfs [ 36.974641] usbcore: registered new interface driver hub [ 36.975244] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 17 [ 36.975259] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit [ 36.975260] ahci 0000:00:12.0: controller can't do PMP, turning off CAP_PMP [ 36.975584] usbcore: registered new device driver usb [ 36.976212] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 37.104654] Floppy drive(s): fd0 is 1.44M [ 37.120704] FDC 0 is a post-1991 82077 [ 37.977408] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 37.977412] ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pio slum part [ 37.977664] scsi0 : ahci [ 37.977811] scsi1 : ahci [ 37.977898] scsi2 : ahci [ 37.977983] scsi3 : ahci [ 37.978031] ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 17 [ 37.978034] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 17 [ 37.978037] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 17 [ 37.978039] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 17 [ 38.452709] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 38.465369] ata1.00: HPA unlocked: 1250261615 -> 1250263728, native 1250263728 [ 38.465373] ata1.00: ATA-8: WDC WD6400AAKS-75A7B0, 01.03B01, max UDMA/133 [ 38.465375] ata1.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 38.466245] ata1.00: configured for UDMA/133 [ 38.940614] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 39.098464] ata2.00: ATAPI: PIONEER DVD-RW DVR-215, 1.13, max UDMA/66 [ 39.254511] ata2.00: configured for UDMA/66 [ 39.728464] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 39.738596] ata3.00: HPA unlocked: 976771055 -> 976773168, native 976773168 [ 39.738599] ata3.00: ATA-8: WDC WD5000AACS-00ZUB0, 01.01B01, max UDMA/133 [ 39.738601] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 39.739347] ata3.00: configured for UDMA/133 [ 40.212368] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 40.371557] ata4.00: ATAPI: HL-DT-ST DVDRAM GH20NS10, EL01, max UDMA/100 [ 40.528578] ata4.00: configured for UDMA/100 [ 40.528639] scsi 0:0:0:0: Direct-Access ATA WDC WD6400AAKS-7 01.0 PQ: 0 ANSI: 5 [ 40.534470] scsi 1:0:0:0: CD-ROM PIONEER DVD-RW DVR-215 1.13 PQ: 0 ANSI: 5 [ 40.534676] scsi 2:0:0:0: Direct-Access ATA WDC WD5000AACS-0 01.0 PQ: 0 ANSI: 5 [ 40.537520] scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GH20NS10 EL01 PQ: 0 ANSI: 5 [ 40.537004] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 16 (level, low) -> IRQ 18 [ 40.537016] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 40.537211] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1 [ 40.537227] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02e000 [ 40.596353] usb usb1: configuration #1 chosen from 1 choice [ 40.596368] hub 1-0:1.0: USB hub found [ 40.596374] hub 1-0:1.0: 2 ports detected [ 40.700327] ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 17 (level, low) -> IRQ 19 [ 40.700335] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 40.700348] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2 [ 40.700360] ohci_hcd 0000:00:13.1: irq 19, io mem 0xfe02d000 [ 40.760299] usb usb2: configuration #1 chosen from 1 choice [ 40.760312] hub 2-0:1.0: USB hub found [ 40.760317] hub 2-0:1.0: 2 ports detected [ 40.864279] ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 18 (level, low) -> IRQ 20 [ 40.864285] ohci_hcd 0000:00:13.2: OHCI Host Controller [ 40.864297] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3 [ 40.864309] ohci_hcd 0000:00:13.2: irq 20, io mem 0xfe02c000 [ 40.924264] usb usb3: configuration #1 chosen from 1 choice [ 40.924278] hub 3-0:1.0: USB hub found [ 40.924283] hub 3-0:1.0: 2 ports detected [ 41.017788] usb 1-2: new full speed USB device using ohci_hcd and address 2 [ 41.028245] ACPI: PCI Interrupt 0000:00:13.3[B] -> GSI 17 (level, low) -> IRQ 19 [ 41.028252] ohci_hcd 0000:00:13.3: OHCI Host Controller [ 41.028265] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 4 [ 41.028274] ohci_hcd 0000:00:13.3: irq 19, io mem 0xfe02b000 [ 41.088236] usb usb4: configuration #1 chosen from 1 choice [ 41.088248] hub 4-0:1.0: USB hub found [ 41.088254] hub 4-0:1.0: 2 ports detected [ 41.192217] ACPI: PCI Interrupt 0000:00:13.4[C] -> GSI 18 (level, low) -> IRQ 20 [ 41.192222] ohci_hcd 0000:00:13.4: OHCI Host Controller [ 41.192234] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 5 [ 41.192243] ohci_hcd 0000:00:13.4: irq 20, io mem 0xfe02a000 [ 41.252211] usb usb5: configuration #1 chosen from 1 choice [ 41.252223] hub 5-0:1.0: USB hub found [ 41.252228] hub 5-0:1.0: 2 ports detected [ 41.356206] ACPI: PCI Interrupt 0000:05:06.0[A] -> GSI 20 (level, low) -> IRQ 21 [ 41.356213] ohci_hcd 0000:05:06.0: OHCI Host Controller [ 41.356228] ohci_hcd 0000:05:06.0: new USB bus registered, assigned bus number 6 [ 41.356240] ohci_hcd 0000:05:06.0: irq 21, io mem 0xfd8ff000 [ 41.356255] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 18 [ 41.356287] ACPI: PCI interrupt for device 0000:00:14.1 disabled [ 41.441980] usb usb6: configuration #1 chosen from 1 choice [ 41.441994] hub 6-0:1.0: USB hub found [ 41.441999] hub 6-0:1.0: 3 ports detected [ 41.544179] ACPI: PCI Interrupt 0000:05:06.1[B] -> GSI 21 (level, low) -> IRQ 22 [ 41.544185] ohci_hcd 0000:05:06.1: OHCI Host Controller [ 41.544197] ohci_hcd 0000:05:06.1: new USB bus registered, assigned bus number 7 [ 41.544209] ohci_hcd 0000:05:06.1: irq 22, io mem 0xfd8fe000 [ 41.629957] usb usb7: configuration #1 chosen from 1 choice [ 41.629969] hub 7-0:1.0: USB hub found [ 41.629974] hub 7-0:1.0: 2 ports detected [ 41.736213] PCI: Enabling device 0000:03:00.1 (0000 -> 0001) [ 41.736218] ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 18 (level, low) -> IRQ 20 [ 41.736243] PCI: Setting latency timer of device 0000:03:00.1 to 64 [ 41.736251] ACPI: PCI interrupt for device 0000:03:00.1 disabled [ 41.736266] PCI: Enabling device 0000:04:00.1 (0000 -> 0001) [ 41.736269] ACPI: PCI Interrupt 0000:04:00.1[B] -> GSI 19 (level, low) -> IRQ 16 [ 41.736285] PCI: Setting latency timer of device 0000:04:00.1 to 64 [ 41.736292] ACPI: PCI interrupt for device 0000:04:00.1 disabled [ 41.736488] ACPI: PCI Interrupt 0000:00:13.5[D] -> GSI 19 (level, low) -> IRQ 16 [ 41.736495] ehci_hcd 0000:00:13.5: EHCI Host Controller [ 41.736508] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 8 [ 41.736535] ehci_hcd 0000:00:13.5: debug port 1 [ 41.736548] ehci_hcd 0000:00:13.5: irq 16, io mem 0xfe029000 [ 41.747838] usb 1-2: configuration #1 chosen from 1 choice [ 41.748098] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 41.748172] usb usb8: configuration #1 chosen from 1 choice [ 41.748187] hub 8-0:1.0: USB hub found [ 41.748191] hub 8-0:1.0: 10 ports detected [ 41.749772] usb 1-2: can't set config #1, error -62 [ 41.749800] usb 1-2: USB disconnect, address 2 [ 41.848177] ACPI: PCI Interrupt 0000:05:06.2[C] -> GSI 22 (level, low) -> IRQ 17 [ 41.848190] ehci_hcd 0000:05:06.2: EHCI Host Controller [ 41.848207] ehci_hcd 0000:05:06.2: new USB bus registered, assigned bus number 9 [ 41.848248] ehci_hcd 0000:05:06.2: irq 17, io mem 0xfd8fd000 [ 41.860078] ehci_hcd 0000:05:06.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 41.860141] usb usb9: configuration #1 chosen from 1 choice [ 41.860157] hub 9-0:1.0: USB hub found [ 41.860160] hub 9-0:1.0: 5 ports detected [ 41.964794] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 19 [ 42.760493] usb 8-2: new high speed USB device using ehci_hcd and address 2 [ 42.968474] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 42.968477] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 42.968481] PCI: Setting latency timer of device 0000:03:00.0 to 64 [ 42.968608] scsi4 : ahci [ 42.968754] scsi5 : ahci [ 42.968774] ata5: SATA max UDMA/133 abar m8192@0xfddfe000 port 0xfddfe100 irq 19 [ 42.968777] ata6: SATA max UDMA/133 abar m8192@0xfddfe000 port 0xfddfe180 irq 19 [ 43.056438] usb 8-3: new high speed USB device using ehci_hcd and address 3 [ 43.189708] usb 8-3: configuration #1 chosen from 1 choice [ 43.287827] ata5: SATA link down (SStatus 0 SControl 300) [ 43.607765] ata6: SATA link down (SStatus 0 SControl 300) [ 43.608401] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 18 (level, low) -> IRQ 20 [ 43.851763] usbcore: registered new interface driver libusual [ 43.856098] Initializing USB Mass Storage driver... [ 44.164231] usb 2-2: new low speed USB device using ohci_hcd and address 2 [ 44.392351] usb 2-2: configuration #1 chosen from 1 choice [ 44.612188] ahci 0000:04:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 44.612191] ahci 0000:04:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 44.612196] PCI: Setting latency timer of device 0000:04:00.0 to 64 [ 44.612321] scsi6 : ahci [ 44.612439] scsi7 : ahci [ 44.612458] ata7: SATA max UDMA/133 abar m8192@0xfdbfe000 port 0xfdbfe100 irq 20 [ 44.612461] ata8: SATA max UDMA/133 abar m8192@0xfdbfe000 port 0xfdbfe180 irq 20 [ 44.633142] usb 9-5: new high speed USB device using ehci_hcd and address 2 [ 44.764546] usb 9-5: configuration #1 chosen from 1 choice [ 44.765927] scsi8 : SCSI emulation for USB Mass Storage devices [ 44.766643] usbcore: registered new interface driver usb-storage [ 44.766646] USB Mass Storage support registered. [ 44.766714] usbcore: registered new interface driver hiddev [ 44.766138] usb-storage: device found at 3 [ 44.766140] usb-storage: waiting for device to settle before scanning [ 45.077059] usb 5-1: new full speed USB device using ohci_hcd and address 2 [ 45.255454] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 45.280931] ata7.00: ATA-8: WDC WD5000AACS-00D0B0, 01.01B01, max UDMA/133 [ 45.280933] ata7.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 45.281844] ata7.00: configured for UDMA/133 [ 45.454213] usb 5-1: configuration #1 chosen from 1 choice [ 45.767941] usb 5-2: new full speed USB device using ohci_hcd and address 3 [ 45.919339] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 45.929378] ata8.00: ATA-8: WDC WD5000AACS-00ZUB0, 01.01B01, max UDMA/133 [ 45.929380] ata8.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 45.930138] ata8.00: configured for UDMA/133 [ 45.930206] scsi 6:0:0:0: Direct-Access ATA WDC WD5000AACS-0 01.0 PQ: 0 ANSI: 5 [ 45.930480] scsi 7:0:0:0: Direct-Access ATA WDC WD5000AACS-0 01.0 PQ: 0 ANSI: 5 [ 45.929968] ACPI: PCI Interrupt 0000:05:0e.0[A] -> GSI 22 (level, low) -> IRQ 17 [ 45.979711] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[fd8fc000-fd8fc7ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 45.982692] Driver 'sd' needs updating - please use bus_type methods [ 45.983688] sd 0:0:0:0: [sda] 1250263728 512-byte hardware sectors (640135 MB) [ 45.983696] sd 0:0:0:0: [sda] Write Protect is off [ 45.983698] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 45.983709] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 45.983740] sd 0:0:0:0: [sda] 1250263728 512-byte hardware sectors (640135 MB) [ 45.983747] sd 0:0:0:0: [sda] Write Protect is off [ 45.983748] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 45.983759] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 45.983761] sda:<4>Driver 'sr' needs updating - please use bus_type methods [ 45.985470] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 18 [ 45.985549] scsi9 : pata_atiixp [ 45.985583] scsi10 : pata_atiixp [ 45.986124] ata9: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf900 irq 14 [ 45.986126] ata10: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf908 irq 15 [ 45.991740] sda1 sda2 <<6>usb 5-2: configuration #1 chosen from 1 choice [ 46.018013] sda5 > [ 46.018066] sd 0:0:0:0: [sda] Attached SCSI disk [ 46.018151] sd 2:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB) [ 46.018159] sd 2:0:0:0: [sdb] Write Protect is off [ 46.018161] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 46.018171] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 46.018196] sd 2:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB) [ 46.018202] sd 2:0:0:0: [sdb] Write Protect is off [ 46.018203] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 46.018213] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 46.018215] sdb:<6>input: Microsoft Microsoft USB Wireless Mouse as /devices/pci0000:00/0000:00:13.1/usb2/2-2/2-2:1.0/input/input2 [ 46.032757] sdb1 [ 46.032789] sd 2:0:0:0: [sdb] Attached SCSI disk [ 46.032822] sd 6:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) [ 46.032829] sd 6:0:0:0: [sdc] Write Protect is off [ 46.032831] sd 6:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 46.032841] sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 46.032865] sd 6:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) [ 46.032871] sd 6:0:0:0: [sdc] Write Protect is off [ 46.032872] sd 6:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 46.032888] sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 46.032890] sdc: sdc1 [ 46.040281] sd 6:0:0:0: [sdc] Attached SCSI disk [ 46.040305] sd 7:0:0:0: [sdd] 976773168 512-byte hardware sectors (500108 MB) [ 46.040311] sd 7:0:0:0: [sdd] Write Protect is off [ 46.040312] sd 7:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 46.040321] sd 7:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 46.040342] sd 7:0:0:0: [sdd] 976773168 512-byte hardware sectors (500108 MB) [ 46.040348] sd 7:0:0:0: [sdd] Write Protect is off [ 46.040349] sd 7:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 46.040359] sd 7:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 46.040361] sdd: sdd1 [ 46.045535] sd 7:0:0:0: [sdd] Attached SCSI disk [ 46.049698] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 46.049710] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 46.049722] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 46.049733] scsi 3:0:0:0: Attached scsi generic sg3 type 5 [ 46.049745] sd 6:0:0:0: Attached scsi generic sg4 type 0 [ 46.049758] sd 7:0:0:0: Attached scsi generic sg5 type 0 [ 46.052927] input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft USB Wireless Mouse] on usb-0000:00:13.1-2 [ 46.052943] usbcore: registered new interface driver usbhid [ 46.052945] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 46.077835] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray [ 46.077839] Uniform CD-ROM driver Revision: 3.20 [ 46.077871] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 46.095233] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 46.095270] sr 3:0:0:0: Attached scsi CD-ROM sr1 [ 46.169801] ata9.00: HPA unlocked: 976771055 -> 976773168, native 976773168 [ 46.169805] ata9.00: ATA-8: WDC WD5000AAKB-00YSA0, 12.01C02, max UDMA/100 [ 46.169807] ata9.00: 976773168 sectors, multi 16: LBA48 [ 46.185487] ata9.00: configured for UDMA/100 [ 46.246104] Attempting manual resume [ 46.246107] swsusp: Resume From Partition 8:5 [ 46.246108] PM: Checking swsusp image. [ 46.246394] PM: Resume from disk failed. [ 46.271518] kjournald starting. Commit interval 5 seconds [ 46.271526] EXT3-fs: mounted filesystem with ordered data mode. [ 46.339359] scsi 9:0:0:0: Direct-Access ATA WDC WD5000AAKB-0 12.0 PQ: 0 ANSI: 5 [ 46.339410] sd 9:0:0:0: [sde] 976773168 512-byte hardware sectors (500108 MB) [ 46.339418] sd 9:0:0:0: [sde] Write Protect is off [ 46.339419] sd 9:0:0:0: [sde] Mode Sense: 00 3a 00 00 [ 46.339430] sd 9:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 46.339459] sd 9:0:0:0: [sde] 976773168 512-byte hardware sectors (500108 MB) [ 46.339465] sd 9:0:0:0: [sde] Write Protect is off [ 46.339467] sd 9:0:0:0: [sde] Mode Sense: 00 3a 00 00 [ 46.339477] sd 9:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 46.339479] sde: sde2 < sde5 > [ 46.350516] sd 9:0:0:0: [sde] Attached SCSI disk [ 46.350540] sd 9:0:0:0: Attached scsi generic sg6 type 0 [ 46.354236] ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 18 (level, low) -> IRQ 20 [ 46.354267] PCI: Setting latency timer of device 0000:03:00.1 to 64 [ 46.354695] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 46.354698] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 46.355041] scsi11 : pata_jmicron [ 46.355101] scsi12 : pata_jmicron [ 46.355123] ata11: PATA max UDMA/100 cmd 0xbf00 ctl 0xbe00 bmdma 0xbb00 irq 20 [ 46.355125] ata12: PATA max UDMA/100 cmd 0xbd00 ctl 0xbc00 bmdma 0xbb08 irq 20 [ 46.675918] ACPI: PCI Interrupt 0000:04:00.1[B] -> GSI 19 (level, low) -> IRQ 16 [ 46.675950] PCI: Setting latency timer of device 0000:04:00.1 to 64 [ 46.676375] scsi13 : pata_jmicron [ 46.676414] scsi14 : pata_jmicron [ 46.676433] ata13: PATA max UDMA/100 cmd 0xef00 ctl 0xee00 bmdma 0xeb00 irq 16 [ 46.676434] ata14: PATA max UDMA/100 cmd 0xed00 ctl 0xec00 bmdma 0xeb08 irq 16 [ 47.251748] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00ce020200001a4d] [ 49.763336] usb-storage: device scan complete [ 49.764083] scsi 8:0:0:0: Direct-Access EPSON Stylus Storage 1.00 PQ: 0 ANSI: 2 [ 49.765722] sd 8:0:0:0: [sdf] Attached SCSI removable disk [ 49.765744] sd 8:0:0:0: Attached scsi generic sg7 type 0 [ 51.023746] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 51.088223] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 51.120019] Linux agpgart interface v0.102 [ 51.409504] input: Power Button (FF) as /devices/virtual/input/input3 [ 51.439912] ACPI: Power Button (FF) [PWRF] [ 51.439968] input: Power Button (CM) as /devices/virtual/input/input4 [ 51.471896] ACPI: Power Button (CM) [PWRB] [ 51.522539] ACPI: WMI-Acer: Mapper loaded [ 51.553396] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device [ 51.902931] ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 18 [ 51.925653] hda_codec: Unknown model for ALC882, trying auto-probe from BIOS... [ 51.943394] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 51.957881] [fglrx] Maximum main memory to use for locked dma buffers: 1898 MBytes. [ 51.957902] [fglrx] ASYNCIO init succeed! [ 51.958256] [fglrx] PAT is enabled successfully! [ 51.958269] [fglrx] module loaded - fglrx 8.47.3 [Feb 25 2008] on minor 0 [ 51.958981] ACPI: PCI Interrupt 0000:01:00.1[B] -> GSI 19 (level, low) -> IRQ 16 [ 51.958999] PCI: Setting latency timer of device 0000:01:00.1 to 64 [ 52.290359] Bluetooth: Core ver 2.11 [ 52.311785] NET: Registered protocol family 31 [ 52.311788] Bluetooth: HCI device and connection manager initialized [ 52.311791] Bluetooth: HCI socket layer initialized [ 52.327732] Bluetooth: HCI USB driver ver 2.9 [ 52.329460] usbcore: registered new interface driver hci_usb [ 52.467960] usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x04B8 pid 0x0803 [ 52.467975] usbcore: registered new interface driver usblp [ 52.515342] Linux video capture interface: v2.00 [ 52.554222] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: USB GSPCA camera found.(SPCA561A) [ 52.567696] usbcore: registered new interface driver gspca [ 52.567700] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: gspca driver 01.00.20 registered [ 52.642160] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 53.528070] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input6 [ 53.587323] parport_pc 00:0a: reported by Plug and Play ACPI [ 53.587377] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 53.881149] lp0: using parport0 (interrupt-driven). [ 53.922104] Adding 6072528k swap on /dev/sda5. Priority:-1 extents:1 across:6072528k [ 54.456250] EXT3 FS on sda1, internal journal [ 55.502830] ip_tables: (C) 2000-2006 Netfilter Core Team [ 55.777475] No dock devices found. [ 56.083197] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 5600+ processors (2 cpu cores) (version 2.20.00) [ 56.082656] powernow-k8: 0 : fid 0x14 (2800 MHz), vid 0xa [ 56.082659] powernow-k8: 1 : fid 0x12 (2600 MHz), vid 0xc [ 56.082661] powernow-k8: 2 : fid 0x10 (2400 MHz), vid 0xe [ 56.082662] powernow-k8: 3 : fid 0xe (2200 MHz), vid 0x10 [ 56.082664] powernow-k8: 4 : fid 0xc (2000 MHz), vid 0x10 [ 56.082665] powernow-k8: 5 : fid 0xa (1800 MHz), vid 0x10 [ 56.082666] powernow-k8: 6 : fid 0x2 (1000 MHz), vid 0x12 [ 56.714227] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) [ 56.714230] apm: disabled - APM is not SMP safe. [ 56.898427] ppdev: user-space parallel port driver [ 57.015475] audit(1215992126.201:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5782 profile="/usr/sbin/cupsd" namespace="default" [ 57.093308] vboxdrv: Trying to deactivate the NMI watchdog permanently... [ 57.093311] vboxdrv: Successfully done. [ 57.093343] vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'. [ 57.093345] vboxdrv: Successfully loaded version 1.5.6_OSE (interface 0x00050002). [ 57.701526] Clocksource tsc unstable (delta = -324014516 ns) [ 58.335260] r8169: eth0: link up [ 58.335267] r8169: eth0: link up [ 58.387719] Bluetooth: L2CAP ver 2.9 [ 58.387722] Bluetooth: L2CAP socket layer initialized [ 58.435665] Bluetooth: RFCOMM socket layer initialized [ 58.435673] Bluetooth: RFCOMM TTY layer initialized [ 58.435674] Bluetooth: RFCOMM ver 1.8 [ 59.160257] NET: Registered protocol family 17 [ 59.232372] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 18 (level, low) -> IRQ 20 [ 60.194632] [fglrx] Reserve Block - 0 offset = 0X1fffc000 length = 0X4000 [ 60.194638] [fglrx] Reserve Block - 1 offset = 0X0 length = 0X1000000 [ 60.194642] [fglrx] Reserve Block - 2 offset = 0Xff7f000 length = 0X80000 [ 60.365306] [fglrx] interrupt source 20008000 successfully enabled [ 60.365311] [fglrx] enable ID = 0x00000006 [ 60.365317] [fglrx] Receive enable interrupt message with irqEnableMask: 20008000 [ 60.365365] [fglrx] interrupt source 10000000 successfully enabled [ 60.365367] [fglrx] enable ID = 0x00000008 [ 60.365370] [fglrx] Receive enable interrupt message with irqEnableMask: 10000000 [ 60.367772] [fglrx] interrupt source 60000001 successfully enabled [ 60.367775] [fglrx] enable ID = 0x00000009 [ 60.367779] [fglrx] Receive enable interrupt message with irqEnableMask: 60000001 [ 60.367816] [fglrx] interrupt source 00000040 successfully enabled [ 60.367818] [fglrx] enable ID = 0x0000000A [ 60.367820] [fglrx] Receive enable interrupt message with irqEnableMask: 00000040 [ 60.368415] [fglrx] interrupt source ff00002c successfully enabled [ 60.368417] [fglrx] enable ID = 0x0000000B [ 60.368420] [fglrx] Receive enable interrupt message with irqEnableMask: ff00002c [ 60.368455] [fglrx] interrupt source ff00002d successfully enabled [ 60.368457] [fglrx] enable ID = 0x0000000C [ 60.368460] [fglrx] Receive enable interrupt message with irqEnableMask: ff00002d [ 60.368493] [fglrx] interrupt source 20000400 successfully enabled [ 60.368495] [fglrx] enable ID = 0x0000000D [ 60.368498] [fglrx] Receive enable interrupt message with irqEnableMask: 20000400 [ 64.546998] NET: Registered protocol family 10 [ 64.547165] lo: Disabled Privacy Extensions [ 64.699774] hda-intel: Invalid position buffer, using LPIB read method instead. [ 76.009645] eth0: no IPv6 routers present [ 147.024866] floppy0: disk absent or changed during operation [ 147.024870] end_request: I/O error, dev fd0, sector 0 [ 147.024873] Buffer I/O error on device fd0, logical block 0 [ 147.024882] floppy0: disk absent or changed during operation [ 147.024884] end_request: I/O error, dev fd0, sector 8 [ 147.024885] Buffer I/O error on device fd0, logical block 1 [ 147.024893] floppy0: disk absent or changed during operation [ 147.024894] end_request: I/O error, dev fd0, sector 16 [ 147.024896] Buffer I/O error on device fd0, logical block 2 [ 147.024903] floppy0: disk absent or changed during operation [ 147.024904] end_request: I/O error, dev fd0, sector 24 [ 147.024905] Buffer I/O error on device fd0, logical block 3 [ 147.026569] floppy0: disk absent or changed during operation [ 147.026571] end_request: I/O error, dev fd0, sector 0 [ 147.026573] Buffer I/O error on device fd0, logical block 0 [ 159.043227] floppy0: disk absent or changed during operation [ 159.043231] end_request: I/O error, dev fd0, sector 0 [ 159.043233] Buffer I/O error on device fd0, logical block 0 [ 159.043242] floppy0: disk absent or changed during operation [ 159.043244] end_request: I/O error, dev fd0, sector 8 [ 159.043245] Buffer I/O error on device fd0, logical block 1 [ 159.043252] floppy0: disk absent or changed during operation [ 159.043254] end_request: I/O error, dev fd0, sector 16 [ 159.043255] Buffer I/O error on device fd0, logical block 2 [ 159.043262] floppy0: disk absent or changed during operation [ 159.043264] end_request: I/O error, dev fd0, sector 24 [ 159.043265] Buffer I/O error on device fd0, logical block 3 [ 159.044940] floppy0: disk absent or changed during operation [ 159.044942] end_request: I/O error, dev fd0, sector 0 [ 159.044944] Buffer I/O error on device fd0, logical block 0