[ 0.000000] Linux version 4.10.0-27-generic (buildd@lgw01-60) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4) ) #30~16.04.2-Ubuntu SMP Thu Jun 29 16:07:46 UTC 2017 (Ubuntu 4.10.0-27.30~16.04.2-generic 4.10.17) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.10.0-27-generic root=UUID=20505d80-9f44-41e3-ba52-e3af372f5bf6 ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: Legacy x87 FPU detected. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e8000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000e7bc6aff] usable [ 0.000000] BIOS-e820: [mem 0x00000000e7bc6b00-0x00000000e7ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f4000000-0x00000000f7ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fed3ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed45000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000217ffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Hewlett-Packard HP Compaq 6005 Pro SFF PC/3047h, BIOS 786G6 v01.17 04/18/2012 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] AGP: No AGP bridge found [ 0.000000] e820: last_pfn = 0x218000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-E3FFF write-protect [ 0.000000] E4000-EFFFF write-back [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFE00000000 write-back [ 0.000000] 1 base 0000E8000000 mask FFFFF8000000 uncachable [ 0.000000] 2 base 0000F0000000 mask FFFFF0000000 uncachable [ 0.000000] 3 base 000218000000 mask FFFFF8000000 uncachable [ 0.000000] 4 base 000200000000 mask FFFFE0000000 write-back [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000218000000 aka 8576M [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] total RAM covered: 3712M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 512M num_reg: 3 lose cover RAM: 0G [ 0.000000] e820: update [mem 0xe8000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xe7bc6 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff911600099000] 99000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x52828000, 0x52828fff] PGTABLE [ 0.000000] BRK [0x52829000, 0x52829fff] PGTABLE [ 0.000000] BRK [0x5282a000, 0x5282afff] PGTABLE [ 0.000000] BRK [0x5282b000, 0x5282bfff] PGTABLE [ 0.000000] BRK [0x5282c000, 0x5282cfff] PGTABLE [ 0.000000] RAMDISK: [mem 0x32384000-0x351b9fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000E5E10 000014 (v00 COMPAQ) [ 0.000000] ACPI: RSDT 0x00000000E7BD6B40 000040 (v01 HPQOEM SLIC-BPC 20120418 00000000) [ 0.000000] ACPI: FACP 0x00000000E7BD6BE8 000074 (v01 COMPAQ HP_RS880 00000001 00000000) [ 0.000000] ACPI: DSDT 0x00000000E7BD6F5F 008EBD (v01 COMPAQ DSDT_PRJ 00000001 MSFT 0100000E) [ 0.000000] ACPI: FACS 0x00000000E7BD6B00 000040 [ 0.000000] ACPI: APIC 0x00000000E7BD6C5C 000084 (v01 COMPAQ HP_RS880 00000001 00000000) [ 0.000000] ACPI: ASF! 0x00000000E7BD6CE0 000063 (v32 COMPAQ HP_RS880 00000001 00000000) [ 0.000000] ACPI: MCFG 0x00000000E7BD6D43 00003C (v01 COMPAQ HP_RS880 00000001 00000000) [ 0.000000] ACPI: TCPA 0x00000000E7BD6D7F 000032 (v01 COMPAQ HP_RS880 00000001 00000000) [ 0.000000] ACPI: SLIC 0x00000000E7BD6DB1 000176 (v01 HPQOEM SLIC-BPC 00000001 00000000) [ 0.000000] ACPI: HPET 0x00000000E7BD6F27 000038 (v01 COMPAQ HP_RS880 00000001 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000217ffffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x217fd3000-0x217ffdfff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x0000000217ffffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000e7bc5fff] [ 0.000000] node 0: [mem 0x0000000100000000-0x0000000217ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000217ffffff] [ 0.000000] On node 0 totalpages: 2095972 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14768 pages used for memmap [ 0.000000] DMA32 zone: 945094 pages, LIFO batch:31 [ 0.000000] Normal zone: 17920 pages used for memmap [ 0.000000] Normal zone: 1146880 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0xf808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10028300 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e7fff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e8000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe7bc6000-0xe7bc6fff] [ 0.000000] PM: Registered nosave memory: [mem 0xe7bc7000-0xe7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe8000000-0xf3ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfed3ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xffffffff] [ 0.000000] e820: [mem 0xe8000000-0xf3ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] percpu: Embedded 36 pages/cpu @ffff911817c00000 s107992 r8192 d31272 u524288 [ 0.000000] pcpu-alloc: s107992 r8192 d31272 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2063199 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.10.0-27-generic root=UUID=20505d80-9f44-41e3-ba52-e3af372f5bf6 ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] AGP: Checking aperture... [ 0.000000] AGP: No AGP bridge found [ 0.000000] AGP: Node 0: aperture [bus addr 0xdc000000-0xddffffff] (32MB) [ 0.000000] Aperture pointing to e820 RAM. Ignoring. [ 0.000000] AGP: Your BIOS doesn't leave an aperture memory hole [ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup [ 0.000000] AGP: This costs you 64MB of RAM [ 0.000000] AGP: Mapping aperture over RAM [mem 0xdc000000-0xdfffffff] (65536KB) [ 0.000000] PM: Registered nosave memory: [mem 0xdc000000-0xdfffffff] [ 0.000000] Memory: 8052420K/8383888K available (9060K kernel code, 1666K rwdata, 3824K rodata, 2228K init, 2364K bss, 331468K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000] NR_IRQS:524544 nr_irqs:456 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3391.614 MHz processor [ 0.000021] Calibrating delay loop (skipped), value calculated using timer frequency.. 6783.22 BogoMIPS (lpj=13566456) [ 0.000023] pid_max: default: 32768 minimum: 301 [ 0.000032] ACPI: Core revision 20160930 [ 0.001692] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 0.001715] Security Framework initialized [ 0.001716] Yama: becoming mindful. [ 0.001730] AppArmor: AppArmor initialized [ 0.002122] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.004871] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.006189] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.006196] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.006492] CPU: Physical Processor ID: 0 [ 0.006493] CPU: Processor Core ID: 0 [ 0.006494] mce: CPU supports 6 MCE banks [ 0.006499] LVT offset 0 assigned for vector 0xf9 [ 0.006501] process: using AMD E400 aware idle routine [ 0.006503] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8 [ 0.006503] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0 [ 0.006922] Freeing SMP alternatives memory: 32K [ 0.009836] process: System has AMD C1E enabled [ 0.009838] ftrace: allocating 34206 entries in 134 pages [ 0.022260] smpboot: Max logical packages: 2 [ 0.022645] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.167197] process: Switch to broadcast mode on CPU0 [ 0.167204] smpboot: CPU0: AMD Athlon(tm) II X2 B28 Processor (family: 0x10, model: 0x6, stepping: 0x3) [ 0.167256] Performance Events: AMD PMU driver. [ 0.167260] ... version: 0 [ 0.167260] ... bit width: 48 [ 0.167260] ... generic registers: 4 [ 0.167261] ... value mask: 0000ffffffffffff [ 0.167261] ... max period: 00007fffffffffff [ 0.167262] ... fixed-purpose events: 0 [ 0.167262] ... event mask: 000000000000000f [ 0.167847] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.167862] smp: Bringing up secondary CPUs ... [ 0.167938] x86: Booting SMP configuration: [ 0.167939] .... node #0, CPUs: #1 [ 0.170061] process: Switch to broadcast mode on CPU1 [ 0.170096] smp: Brought up 1 node, 2 CPUs [ 0.170098] smpboot: Total of 2 processors activated (13566.45 BogoMIPS) [ 0.170912] devtmpfs: initialized [ 0.170979] x86/mm: Memory block size: 128MB [ 0.174309] evm: security.selinux [ 0.174310] evm: security.SMACK64 [ 0.174310] evm: security.SMACK64EXEC [ 0.174310] evm: security.SMACK64TRANSMUTE [ 0.174311] evm: security.SMACK64MMAP [ 0.174311] evm: security.ima [ 0.174311] evm: security.capability [ 0.174392] reboot: HP Compaq Laptop series board detected. Selecting BIOS-method for reboots. [ 0.174430] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.174436] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.174473] pinctrl core: initialized pinctrl subsystem [ 0.174593] RTC time: 15:15:28, date: 07/27/17 [ 0.174679] NET: Registered protocol family 16 [ 0.187287] cpuidle: using governor ladder [ 0.203287] cpuidle: using governor menu [ 0.203290] PCCT header not found. [ 0.203294] node 0 link 0: io port [1000, ffffff] [ 0.203296] TOM: 00000000e8000000 aka 3712M [ 0.203297] Fam 10h mmconf [mem 0xf4000000-0xf7ffffff] [ 0.203299] node 0 link 0: mmio [a0000, bffff] [ 0.203300] node 0 link 0: mmio [e8000000, f3ffffff] [ 0.203301] node 0 link 0: mmio [f4000000, f7ffffff] ==> none [ 0.203302] node 0 link 0: mmio [f8000000, ffffffff] [ 0.203303] TOM2: 0000000218000000 aka 8576M [ 0.203304] bus: [bus 00-ff] on node 0 link 0 [ 0.203305] bus: 00 [io 0x0000-0xffff] [ 0.203305] bus: 00 [mem 0x000a0000-0x000bffff] [ 0.203306] bus: 00 [mem 0xe8000000-0xf3ffffff] [ 0.203306] bus: 00 [mem 0xf8000000-0xffffffff] [ 0.203307] bus: 00 [mem 0x218000000-0xfcffffffff] [ 0.203385] ACPI: bus type PCI registered [ 0.203386] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.203464] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000) [ 0.203466] PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820 [ 0.203473] pmd_set_huge: Cannot satisfy [mem 0xf4000000-0xf4200000] with a huge-page mapping due to MTRR override. [ 0.203550] PCI: Using configuration type 1 for base access [ 0.219476] HugeTLB registered 1 GB page size, pre-allocated 0 pages [ 0.219477] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.219732] ACPI: Added _OSI(Module Device) [ 0.219733] ACPI: Added _OSI(Processor Device) [ 0.219733] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.219734] ACPI: Added _OSI(Processor Aggregator Device) [ 0.220956] ACPI: Interpreter enabled [ 0.220971] ACPI: (supports S0 S3 S4 S5) [ 0.220971] ACPI: Using IOAPIC for interrupt routing [ 0.221027] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.224170] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.224176] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.224181] ACPI BIOS Error (bug): \_SB.PCI0._OSC: Excess arguments - ASL declared 5, ACPI requires 4 (20160930/nsarguments-189) [ 0.224219] ACPI Error: [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS (20160930/dsfield-211) [ 0.224223] ACPI Error: Method parse/execution failed [\_SB.PCI0._OSC] (Node ffff91180f0b0c80), AE_ALREADY_EXISTS (20160930/psparse-543) [ 0.224229] acpi PNP0A08:00: _OSC failed (AE_ALREADY_EXISTS); disabling ASPM [ 0.224241] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ 0.224640] PCI host bridge to bus 0000:00 [ 0.224644] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfebfffff window] [ 0.224645] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.224646] pci_bus 0000:00: root bus resource [io 0x1000-0x2fff window] [ 0.224647] pci_bus 0000:00: root bus resource [io 0x3000-0x6fff window] [ 0.224648] pci_bus 0000:00: root bus resource [io 0x7000-0xafff window] [ 0.224648] pci_bus 0000:00: root bus resource [io 0xb000-0xffff window] [ 0.224652] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.224653] pci_bus 0000:00: root bus resource [mem 0xe8000000-0xf3ffffff window] [ 0.224653] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window] [ 0.224655] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.224662] pci 0000:00:00.0: [1022:9601] type 00 class 0x060000 [ 0.224778] pci 0000:00:02.0: [1022:9603] type 01 class 0x060400 [ 0.224807] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.224837] pci 0000:00:02.0: System wakeup disabled by ACPI [ 0.224907] pci 0000:00:0a.0: [1022:9609] type 01 class 0x060400 [ 0.224935] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.224962] pci 0000:00:0a.0: System wakeup disabled by ACPI [ 0.225035] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601 [ 0.225051] pci 0000:00:11.0: reg 0x10: [io 0x2110-0x2117] [ 0.225059] pci 0000:00:11.0: reg 0x14: [io 0x2120-0x2123] [ 0.225067] pci 0000:00:11.0: reg 0x18: [io 0x2118-0x211f] [ 0.225075] pci 0000:00:11.0: reg 0x1c: [io 0x2124-0x2127] [ 0.225083] pci 0000:00:11.0: reg 0x20: [io 0x2100-0x210f] [ 0.225091] pci 0000:00:11.0: reg 0x24: [mem 0xf3209000-0xf32093ff] [ 0.225177] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 [ 0.225189] pci 0000:00:12.0: reg 0x10: [mem 0xf3204000-0xf3204fff] [ 0.225266] pci 0000:00:12.0: System wakeup disabled by ACPI [ 0.225336] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310 [ 0.225348] pci 0000:00:12.1: reg 0x10: [mem 0xf3205000-0xf3205fff] [ 0.225425] pci 0000:00:12.1: System wakeup disabled by ACPI [ 0.225497] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 [ 0.225512] pci 0000:00:12.2: reg 0x10: [mem 0xf3209400-0xf32094ff] [ 0.225586] pci 0000:00:12.2: supports D1 D2 [ 0.225587] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.225615] pci 0000:00:12.2: System wakeup disabled by ACPI [ 0.225650] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 [ 0.225662] pci 0000:00:13.0: reg 0x10: [mem 0xf3206000-0xf3206fff] [ 0.225740] pci 0000:00:13.0: System wakeup disabled by ACPI [ 0.225809] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310 [ 0.225820] pci 0000:00:13.1: reg 0x10: [mem 0xf3207000-0xf3207fff] [ 0.225898] pci 0000:00:13.1: System wakeup disabled by ACPI [ 0.225927] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 [ 0.225942] pci 0000:00:13.2: reg 0x10: [mem 0xf3209500-0xf32095ff] [ 0.226016] pci 0000:00:13.2: supports D1 D2 [ 0.226016] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.226045] pci 0000:00:13.2: System wakeup disabled by ACPI [ 0.226122] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 [ 0.226246] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 [ 0.226264] pci 0000:00:14.2: reg 0x10: [mem 0xf3200000-0xf3203fff 64bit] [ 0.226325] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.226374] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 [ 0.226484] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 [ 0.226540] pci 0000:00:14.4: System wakeup disabled by ACPI [ 0.226610] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 [ 0.226622] pci 0000:00:14.5: reg 0x10: [mem 0xf3208000-0xf3208fff] [ 0.226698] pci 0000:00:14.5: System wakeup disabled by ACPI [ 0.226771] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000 [ 0.226817] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000 [ 0.226860] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000 [ 0.226904] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000 [ 0.226950] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000 [ 0.227091] pci 0000:02:00.0: [10de:1288] type 00 class 0x030000 [ 0.227099] pci 0000:02:00.0: reg 0x10: [mem 0xf2000000-0xf2ffffff] [ 0.227107] pci 0000:02:00.0: reg 0x14: [mem 0xe8000000-0xefffffff 64bit pref] [ 0.227113] pci 0000:02:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref] [ 0.227118] pci 0000:02:00.0: reg 0x24: [io 0x1100-0x117f] [ 0.227123] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref] [ 0.227189] pci 0000:02:00.1: [10de:0e0f] type 00 class 0x040300 [ 0.227197] pci 0000:02:00.1: reg 0x10: [mem 0xf3000000-0xf3003fff] [ 0.239299] pci 0000:00:02.0: PCI bridge to [bus 02] [ 0.239303] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff] [ 0.239305] pci 0000:00:02.0: bridge window [mem 0xf2000000-0xf30fffff] [ 0.239308] pci 0000:00:02.0: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref] [ 0.239384] pci 0000:3f:00.0: [14e4:1681] type 00 class 0x020000 [ 0.239404] pci 0000:3f:00.0: reg 0x10: [mem 0xf3100000-0xf310ffff 64bit] [ 0.239416] pci 0000:3f:00.0: reg 0x18: [mem 0xf3110000-0xf311ffff 64bit] [ 0.239509] pci 0000:3f:00.0: PME# supported from D3hot D3cold [ 0.251300] pci 0000:00:0a.0: PCI bridge to [bus 3f] [ 0.251305] pci 0000:00:0a.0: bridge window [mem 0xf3100000-0xf31fffff] [ 0.251439] pci 0000:00:14.4: PCI bridge to [bus 0f] (subtractive decode) [ 0.251447] pci 0000:00:14.4: bridge window [mem 0xf8000000-0xfebfffff window] (subtractive decode) [ 0.251448] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.251449] pci 0000:00:14.4: bridge window [io 0x1000-0x2fff window] (subtractive decode) [ 0.251450] pci 0000:00:14.4: bridge window [io 0x3000-0x6fff window] (subtractive decode) [ 0.251451] pci 0000:00:14.4: bridge window [io 0x7000-0xafff window] (subtractive decode) [ 0.251452] pci 0000:00:14.4: bridge window [io 0xb000-0xffff window] (subtractive decode) [ 0.251453] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.251454] pci 0000:00:14.4: bridge window [mem 0xe8000000-0xf3ffffff window] (subtractive decode) [ 0.251455] pci 0000:00:14.4: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode) [ 0.251963] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. [ 0.252001] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. [ 0.252035] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. [ 0.252068] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. [ 0.252101] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. [ 0.252133] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. [ 0.252166] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. [ 0.252201] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. [ 0.252565] SCSI subsystem initialized [ 0.252622] libata version 3.00 loaded. [ 0.252679] pci 0000:02:00.0: vgaarb: setting as boot VGA device [ 0.252681] pci 0000:02:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.252682] pci 0000:02:00.0: vgaarb: bridge control possible [ 0.252683] vgaarb: loaded [ 0.252699] ACPI: bus type USB registered [ 0.252713] usbcore: registered new interface driver usbfs [ 0.252722] usbcore: registered new interface driver hub [ 0.252729] usbcore: registered new device driver usb [ 0.252821] PCI: Using ACPI for IRQ routing [ 0.254783] PCI: pci_cache_line_size set to 64 bytes [ 0.254829] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff] [ 0.254830] e820: reserve RAM buffer [mem 0xe7bc6b00-0xe7ffffff] [ 0.254906] NetLabel: Initializing [ 0.254907] NetLabel: domain hash size = 128 [ 0.254907] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.254918] NetLabel: unlabeled traffic allowed by default [ 0.255025] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.255027] hpet0: 4 comparators, 32-bit 14.318180 MHz counter [ 0.257076] clocksource: Switched to clocksource hpet [ 0.264895] VFS: Disk quotas dquot_6.6.0 [ 0.264917] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.265024] AppArmor: AppArmor Filesystem Enabled [ 0.265072] pnp: PnP ACPI init [ 0.265148] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.265169] pnp 00:01: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active) [ 0.265188] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.265373] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active) [ 0.265410] pnp 00:04: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active) [ 0.265587] system 00:05: [io 0x040b] has been reserved [ 0.265588] system 00:05: [io 0x04d0-0x04df] has been reserved [ 0.265590] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.265622] system 00:06: [io 0x0800-0x087f] has been reserved [ 0.265623] system 00:06: [io 0x0880-0x088f] has been reserved [ 0.265624] system 00:06: [io 0x0c00-0x0c1f] has been reserved [ 0.265625] system 00:06: [io 0x0c50-0x0c6f] has been reserved [ 0.265626] system 00:06: [io 0x0cd0-0x0cdf] has been reserved [ 0.265627] system 00:06: [io 0xf800-0xf87f] has been reserved [ 0.265628] system 00:06: [io 0xf880-0xf8ff] has been reserved [ 0.265629] system 00:06: [io 0xf900-0xf97f] has been reserved [ 0.265630] system 00:06: [io 0xf980-0xf9ff] has been reserved [ 0.265631] system 00:06: [io 0xfa00-0xfa7f] has been reserved [ 0.265632] system 00:06: [io 0xfa80-0xfaff] has been reserved [ 0.265633] system 00:06: [io 0xfc00-0xfc7f] has been reserved [ 0.265634] system 00:06: [io 0xfd00-0xfd7f] has been reserved [ 0.265635] system 00:06: [io 0xfd80-0xfdff] has been reserved [ 0.265637] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.265830] system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.265831] system 00:07: [mem 0x00100000-0xe7ffffff] could not be reserved [ 0.265833] system 00:07: [mem 0x000e4000-0x000fffff] could not be reserved [ 0.265834] system 00:07: [mem 0xfec01000-0xfecfffff] has been reserved [ 0.265835] system 00:07: [mem 0xfed00400-0xfed3ffff] could not be reserved [ 0.265836] system 00:07: [mem 0xfed45000-0xffffffff] has been reserved [ 0.265837] system 00:07: [mem 0xf4000000-0xf7ffffff] has been reserved [ 0.265838] system 00:07: [mem 0x000d1a00-0x000e3fff] has been reserved [ 0.265839] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.265846] pnp: PnP ACPI: found 8 devices [ 0.272667] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.272687] pci 0000:02:00.0: BAR 6: assigned [mem 0xf3080000-0xf30fffff pref] [ 0.272688] pci 0000:00:02.0: PCI bridge to [bus 02] [ 0.272690] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff] [ 0.272692] pci 0000:00:02.0: bridge window [mem 0xf2000000-0xf30fffff] [ 0.272693] pci 0000:00:02.0: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref] [ 0.272696] pci 0000:00:0a.0: PCI bridge to [bus 3f] [ 0.272698] pci 0000:00:0a.0: bridge window [mem 0xf3100000-0xf31fffff] [ 0.272701] pci 0000:00:14.4: PCI bridge to [bus 0f] [ 0.272712] pci_bus 0000:00: resource 4 [mem 0xf8000000-0xfebfffff window] [ 0.272713] pci_bus 0000:00: resource 5 [io 0x0000-0x0cf7 window] [ 0.272714] pci_bus 0000:00: resource 6 [io 0x1000-0x2fff window] [ 0.272715] pci_bus 0000:00: resource 7 [io 0x3000-0x6fff window] [ 0.272716] pci_bus 0000:00: resource 8 [io 0x7000-0xafff window] [ 0.272716] pci_bus 0000:00: resource 9 [io 0xb000-0xffff window] [ 0.272717] pci_bus 0000:00: resource 10 [mem 0x000a0000-0x000bffff window] [ 0.272718] pci_bus 0000:00: resource 11 [mem 0xe8000000-0xf3ffffff window] [ 0.272719] pci_bus 0000:00: resource 12 [mem 0xfed40000-0xfed44fff window] [ 0.272720] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff] [ 0.272721] pci_bus 0000:02: resource 1 [mem 0xf2000000-0xf30fffff] [ 0.272722] pci_bus 0000:02: resource 2 [mem 0xe8000000-0xf1ffffff 64bit pref] [ 0.272723] pci_bus 0000:3f: resource 1 [mem 0xf3100000-0xf31fffff] [ 0.272724] pci_bus 0000:0f: resource 4 [mem 0xf8000000-0xfebfffff window] [ 0.272726] pci_bus 0000:0f: resource 5 [io 0x0000-0x0cf7 window] [ 0.272727] pci_bus 0000:0f: resource 6 [io 0x1000-0x2fff window] [ 0.272727] pci_bus 0000:0f: resource 7 [io 0x3000-0x6fff window] [ 0.272728] pci_bus 0000:0f: resource 8 [io 0x7000-0xafff window] [ 0.272729] pci_bus 0000:0f: resource 9 [io 0xb000-0xffff window] [ 0.272730] pci_bus 0000:0f: resource 10 [mem 0x000a0000-0x000bffff window] [ 0.272731] pci_bus 0000:0f: resource 11 [mem 0xe8000000-0xf3ffffff window] [ 0.272732] pci_bus 0000:0f: resource 12 [mem 0xfed40000-0xfed44fff window] [ 0.272781] NET: Registered protocol family 2 [ 0.273005] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.273205] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.273500] TCP: Hash tables configured (established 65536 bind 65536) [ 0.273562] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.273614] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.273719] NET: Registered protocol family 1 [ 0.573286] pci 0000:02:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.573295] PCI: CLS 64 bytes, default 64 [ 0.573347] Unpacking initramfs... [ 1.158048] Freeing initrd memory: 47320K [ 1.158255] PCI-DMA: Disabling AGP. [ 1.158362] PCI-DMA: aperture base @ dc000000 size 65536 KB [ 1.158362] PCI-DMA: using GART IOMMU. [ 1.158364] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 1.160464] LVT offset 1 assigned for vector 0x400 [ 1.160472] IBS: LVT offset 1 assigned [ 1.160572] perf: AMD IBS detected (0x0000001f) [ 1.160633] Scanning for low memory corruption every 60 seconds [ 1.160997] audit: initializing netlink subsys (disabled) [ 1.161141] audit: type=2000 audit(1501168529.056:1): initialized [ 1.161379] Initialise system trusted keyrings [ 1.161569] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 1.162807] zbud: loaded [ 1.163233] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.163502] fuse init (API version 7.26) [ 1.165332] Key type asymmetric registered [ 1.165333] Asymmetric key parser 'x509' registered [ 1.165383] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 1.165476] io scheduler noop registered [ 1.165476] io scheduler deadline registered [ 1.165484] io scheduler cfq registered (default) [ 1.165865] vesafb: mode is 1920x1080x32, linelength=7680, pages=0 [ 1.165865] vesafb: scrolling: redraw [ 1.165866] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.165883] vesafb: framebuffer at 0xf1000000, mapped to 0xffffabef41800000, using 8128k, total 8128k [ 1.165990] Console: switching to colour frame buffer device 240x67 [ 1.166015] fb0: VESA VGA frame buffer device [ 1.166074] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.166077] ACPI: Power Button [PBTN] [ 1.166103] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.166105] ACPI: Power Button [PWRF] [ 1.166160] ACPI: ACPI: processor limited to max C-state 1 [ 1.166417] GHES: HEST is not enabled! [ 1.166548] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.187109] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.188604] Linux agpgart interface v0.103 [ 1.265186] tpm_tis 00:04: 1.2 TPM (device-id 0xB, rev-id 16) [ 1.572070] loop: module loaded [ 1.572238] libphy: Fixed MDIO Bus: probed [ 1.572238] tun: Universal TUN/TAP device driver, 1.6 [ 1.572239] tun: (C) 1999-2004 Max Krasnyansky [ 1.572342] PPP generic driver version 2.4.2 [ 1.572379] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.572381] ehci-pci: EHCI PCI platform driver [ 1.572525] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.572530] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 1.572534] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.572543] ehci-pci 0000:00:12.2: debug port 1 [ 1.572581] ehci-pci 0000:00:12.2: irq 17, io mem 0xf3209400 [ 1.585132] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.585288] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.585290] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.585291] usb usb1: Product: EHCI Host Controller [ 1.585292] usb usb1: Manufacturer: Linux 4.10.0-27-generic ehci_hcd [ 1.585293] usb usb1: SerialNumber: 0000:00:12.2 [ 1.585492] hub 1-0:1.0: USB hub found [ 1.585566] hub 1-0:1.0: 6 ports detected [ 1.585999] ehci-pci 0000:00:13.2: EHCI Host Controller [ 1.586004] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1.586006] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.586015] ehci-pci 0000:00:13.2: debug port 1 [ 1.586051] ehci-pci 0000:00:13.2: irq 19, io mem 0xf3209500 [ 1.601133] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.601257] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.601259] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.601260] usb usb2: Product: EHCI Host Controller [ 1.601260] usb usb2: Manufacturer: Linux 4.10.0-27-generic ehci_hcd [ 1.601261] usb usb2: SerialNumber: 0000:00:13.2 [ 1.601494] hub 2-0:1.0: USB hub found [ 1.601564] hub 2-0:1.0: 6 ports detected [ 1.601894] ehci-platform: EHCI generic platform driver [ 1.601907] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.601914] ohci-pci: OHCI PCI platform driver [ 1.602103] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 1.602107] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3 [ 1.602128] ohci-pci 0000:00:12.0: irq 16, io mem 0xf3204000 [ 1.665155] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.665157] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.665158] usb usb3: Product: OHCI PCI host controller [ 1.665159] usb usb3: Manufacturer: Linux 4.10.0-27-generic ohci_hcd [ 1.665159] usb usb3: SerialNumber: 0000:00:12.0 [ 1.665338] hub 3-0:1.0: USB hub found [ 1.665345] hub 3-0:1.0: 3 ports detected [ 1.665564] ohci-pci 0000:00:12.1: OHCI PCI host controller [ 1.665567] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 1.665595] ohci-pci 0000:00:12.1: irq 16, io mem 0xf3205000 [ 1.729157] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.729159] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.729160] usb usb4: Product: OHCI PCI host controller [ 1.729161] usb usb4: Manufacturer: Linux 4.10.0-27-generic ohci_hcd [ 1.729162] usb usb4: SerialNumber: 0000:00:12.1 [ 1.729336] hub 4-0:1.0: USB hub found [ 1.729342] hub 4-0:1.0: 3 ports detected [ 1.729561] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 1.729565] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.729593] ohci-pci 0000:00:13.0: irq 18, io mem 0xf3206000 [ 1.793187] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.793188] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.793189] usb usb5: Product: OHCI PCI host controller [ 1.793190] usb usb5: Manufacturer: Linux 4.10.0-27-generic ohci_hcd [ 1.793191] usb usb5: SerialNumber: 0000:00:13.0 [ 1.793314] hub 5-0:1.0: USB hub found [ 1.793365] hub 5-0:1.0: 3 ports detected [ 1.793586] ohci-pci 0000:00:13.1: OHCI PCI host controller [ 1.793590] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 1.793611] ohci-pci 0000:00:13.1: irq 18, io mem 0xf3207000 [ 1.857201] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.857203] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.857203] usb usb6: Product: OHCI PCI host controller [ 1.857204] usb usb6: Manufacturer: Linux 4.10.0-27-generic ohci_hcd [ 1.857205] usb usb6: SerialNumber: 0000:00:13.1 [ 1.857383] hub 6-0:1.0: USB hub found [ 1.857434] hub 6-0:1.0: 3 ports detected [ 1.857672] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 1.857677] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 1.857701] ohci-pci 0000:00:14.5: irq 18, io mem 0xf3208000 [ 1.921144] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.921145] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.921146] usb usb7: Product: OHCI PCI host controller [ 1.921147] usb usb7: Manufacturer: Linux 4.10.0-27-generic ohci_hcd [ 1.921148] usb usb7: SerialNumber: 0000:00:14.5 [ 1.921327] hub 7-0:1.0: USB hub found [ 1.921378] hub 7-0:1.0: 2 ports detected [ 1.921463] ohci-platform: OHCI generic platform driver [ 1.921475] uhci_hcd: USB Universal Host Controller Interface driver [ 1.921532] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12 [ 1.924549] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.924557] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.924753] mousedev: PS/2 mouse device common for all mice [ 1.924886] rtc_cmos 00:00: RTC can wake from S4 [ 1.925034] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0 [ 1.925059] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.925066] i2c /dev entries driver [ 1.925118] device-mapper: uevent: version 1.0.3 [ 1.925205] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.925228] ledtrig-cpu: registered to indicate activity on CPUs [ 1.925529] NET: Registered protocol family 10 [ 1.929660] Segment Routing with IPv6 [ 1.929682] NET: Registered protocol family 17 [ 1.929692] Key type dns_resolver registered [ 1.930165] microcode: CPU0: patch_level=0x010000b6 [ 1.930170] microcode: CPU1: patch_level=0x010000b6 [ 1.930217] microcode: Microcode Update Driver: v2.2. [ 1.930339] registered taskstats version 1 [ 1.930347] Loading compiled-in X.509 certificates [ 1.933190] Loaded X.509 cert 'Build time autogenerated kernel key: 8f6a26ed9a783577bc61518508a0bfc9a7f8e602' [ 1.933216] zswap: loaded using pool lzo/zbud [ 1.944196] usb 2-3: new high-speed USB device number 2 using ehci-pci [ 1.946168] Key type big_key registered [ 1.946172] Key type trusted registered [ 1.948044] Key type encrypted registered [ 1.948048] AppArmor: AppArmor sha1 policy hashing enabled [ 2.068446] random: fast init done [ 2.090773] usb 2-3: New USB device found, idVendor=05e3, idProduct=0608 [ 2.090775] usb 2-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.090776] usb 2-3: Product: USB2.0 Hub [ 2.091190] hub 2-3:1.0: USB hub found [ 2.091520] hub 2-3:1.0: 4 ports detected [ 2.169132] usb 3-1: new low-speed USB device number 2 using ohci-pci [ 2.185117] tsc: Refined TSC clocksource calibration: 3391.500 MHz [ 2.185121] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x30e2f166364, max_idle_ns: 440795313971 ns [ 2.359215] usb 3-1: New USB device found, idVendor=045e, idProduct=0047 [ 2.359217] usb 3-1: New USB device strings: Mfr=1, Product=3, SerialNumber=0 [ 2.359218] usb 3-1: Product: Microsoft 5-Button Mouse with IntelliEye(TM) [ 2.359219] usb 3-1: Manufacturer: Microsoft [ 2.381103] usb 2-3.3: new high-speed USB device number 3 using ehci-pci [ 2.490070] usb 2-3.3: New USB device found, idVendor=0781, idProduct=5530 [ 2.490071] usb 2-3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.490072] usb 2-3.3: Product: Cruzer [ 2.490073] usb 2-3.3: Manufacturer: SanDisk [ 2.490074] usb 2-3.3: SerialNumber: 20060878311B13F24A89 [ 2.665128] evm: HMAC attrs: 0x1 [ 2.665402] Magic number: 9:346:286 [ 2.665420] ppp ppp: hash matches [ 2.665558] rtc_cmos 00:00: setting system clock to 2017-07-27 15:15:31 UTC (1501168531) [ 2.665697] acpi_cpufreq: overriding BIOS provided _PSD data [ 2.665774] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.665774] EDD information not available. [ 2.665797] PM: Hibernation image not present or could not be loaded. [ 2.667702] Freeing unused kernel memory: 2228K [ 2.667703] Write protecting the kernel read-only data: 14336k [ 2.668238] Freeing unused kernel memory: 1164K [ 2.668902] Freeing unused kernel memory: 272K [ 2.675829] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.722554] pps_core: LinuxPPS API ver. 1 registered [ 2.722555] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.723646] PTP clock support registered [ 2.731058] FUJITSU Extended Socket Network Device Driver - version 1.2 - Copyright (c) 2015 FUJITSU LIMITED [ 2.733531] tg3.c:v3.137 (May 11, 2014) [ 2.733537] ahci 0000:00:11.0: version 3.0 [ 2.735236] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 2.735238] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pio slum part ccc sxs [ 2.738517] [drm] Initialized [ 2.745599] scsi host0: ahci [ 2.746163] usb-storage 2-3.3:1.0: USB Mass Storage device detected [ 2.751528] scsi host1: ahci [ 2.753070] scsi host2: usb-storage 2-3.3:1.0 [ 2.753161] usbcore: registered new interface driver usb-storage [ 2.754412] usbcore: registered new interface driver uas [ 2.758407] scsi host3: ahci [ 2.761034] nvidia: loading out-of-tree module taints kernel. [ 2.761039] nvidia: module license 'NVIDIA' taints kernel. [ 2.761039] Disabling lock debugging due to kernel taint [ 2.769200] tg3 0000:3f:00.0 eth0: Tigon3 [partno(BCM95761) rev 5761100] (PCI Express) MAC address e8:39:35:47:05:ab [ 2.769203] tg3 0000:3f:00.0 eth0: attached PHY is 5761 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) [ 2.769204] tg3 0000:3f:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 2.769205] tg3 0000:3f:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 2.775757] scsi host4: ahci [ 2.782449] nvidia: module verification failed: signature and/or required key missing - tainting kernel [ 2.787409] scsi host5: ahci [ 2.788874] nvidia 0000:02:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem [ 2.789212] nvidia-nvlink: Nvlink Core is being initialized, major device number 244 [ 2.789227] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 375.66 Mon May 1 15:29:16 PDT 2017 (using threaded interrupts) [ 2.791855] scsi host6: ahci [ 2.791911] ata1: SATA max UDMA/133 abar m1024@0xf3209000 port 0xf3209100 irq 22 [ 2.791913] ata2: SATA max UDMA/133 abar m1024@0xf3209000 port 0xf3209180 irq 22 [ 2.791915] ata3: SATA max UDMA/133 abar m1024@0xf3209000 port 0xf3209200 irq 22 [ 2.791917] ata4: SATA max UDMA/133 abar m1024@0xf3209000 port 0xf3209280 irq 22 [ 2.791919] ata5: SATA max UDMA/133 abar m1024@0xf3209000 port 0xf3209300 irq 22 [ 2.791921] ata6: SATA max UDMA/133 abar m1024@0xf3209000 port 0xf3209380 irq 22 [ 2.792019] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 375.66 Mon May 1 14:33:30 PDT 2017 [ 2.792710] [drm] [nvidia-drm] [GPU ID 0x00000200] Loading driver [ 2.805798] tg3 0000:3f:00.0 enp63s0: renamed from eth0 [ 2.901090] usb 3-2: new full-speed USB device number 3 using ohci-pci [ 3.088189] usb 3-2: New USB device found, idVendor=8086, idProduct=0808 [ 3.088191] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.088192] usb 3-2: Product: USB PnP Sound Device [ 3.088193] usb 3-2: Manufacturer: C-Media Electronics Inc. [ 3.094718] hidraw: raw HID events driver (C) Jiri Kosina [ 3.104358] usbcore: registered new interface driver usbhid [ 3.104359] usbhid: USB HID core driver [ 3.106330] input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0/0003:045E:0047.0001/input/input5 [ 3.106409] hid-generic 0003:045E:0047.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:12.0-1/input0 [ 3.107227] input: C-Media Electronics Inc. USB PnP Sound Device as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.2/0003:8086:0808.0002/input/input6 [ 3.109353] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.109385] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.109414] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.110156] ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [ 3.110158] ata2.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out [ 3.110269] ata3.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [ 3.110271] ata3.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out [ 3.110281] ata2.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded [ 3.110355] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [ 3.110356] ata1.00: ACPI cmd ef/03:46:00:00:00:a0 (SET FEATURES) filtered out [ 3.110359] ata2.00: ACPI cmd e3/00:00:00:00:00:a0 (IDLE) succeeded [ 3.110361] ata2.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out [ 3.110362] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 3.110368] ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded [ 3.110520] ata3.00: ACPI cmd e3/00:00:00:00:00:a0 (IDLE) succeeded [ 3.110523] ata3.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out [ 3.110524] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 3.110536] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded [ 3.110711] ata1.00: ACPI cmd e3/00:00:00:00:00:a0 (IDLE) succeeded [ 3.110713] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out [ 3.110714] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 3.111414] ata3.00: ATA-7: ST920217AS, 3.01, max UDMA/100 [ 3.111416] ata3.00: 39070080 sectors, multi 16: LBA48 NCQ (depth 1) [ 3.111854] ata1.00: ATA-8: Hitachi HDS721050CLA660, JP2OA41A, max UDMA/133 [ 3.111855] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 3.112251] ata3.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [ 3.112253] ata3.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out [ 3.112444] ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded [ 3.112602] ata3.00: ACPI cmd e3/00:00:00:00:00:a0 (IDLE) succeeded [ 3.112604] ata3.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out [ 3.112606] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 3.112878] ata4: SATA link down (SStatus 0 SControl 300) [ 3.113056] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [ 3.113057] ata1.00: ACPI cmd ef/03:46:00:00:00:a0 (SET FEATURES) filtered out [ 3.113259] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded [ 3.113383] ata3.00: configured for UDMA/100 [ 3.113415] ata1.00: ACPI cmd e3/00:00:00:00:00:a0 (IDLE) succeeded [ 3.113416] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out [ 3.113417] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 3.114602] ata1.00: configured for UDMA/133 [ 3.114873] scsi 0:0:0:0: Direct-Access ATA Hitachi HDS72105 A41A PQ: 0 ANSI: 5 [ 3.116825] ata5: SATA link down (SStatus 0 SControl 300) [ 3.121020] ata6: SATA link down (SStatus 0 SControl 300) [ 3.138724] ata2.00: ATA-8: TOSHIBA MK3263GSX, FG020M, max UDMA/100 [ 3.138725] ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 3.139583] ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [ 3.139585] ata2.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out [ 3.139672] ata2.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded [ 3.139712] ata2.00: ACPI cmd e3/00:00:00:00:00:a0 (IDLE) succeeded [ 3.139714] ata2.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out [ 3.139715] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 3.140599] ata2.00: configured for UDMA/100 [ 3.157247] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.157394] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 3.157403] sd 0:0:0:0: [sda] Write Protect is off [ 3.157404] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.157418] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.157517] scsi 1:0:0:0: Direct-Access ATA TOSHIBA MK3263GS 0M PQ: 0 ANSI: 5 [ 3.165314] hid-generic 0003:8086:0808.0002: input,hidraw1: USB HID v1.00 Device [C-Media Electronics Inc. USB PnP Sound Device] on usb-0000:00:12.0-2/input2 [ 3.189244] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 3.189369] sd 1:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 3.189378] sd 1:0:0:0: [sdb] Write Protect is off [ 3.189379] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.189393] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.189531] scsi 3:0:0:0: Direct-Access ATA ST920217AS 3.01 PQ: 0 ANSI: 5 [ 3.209154] clocksource: Switched to clocksource tsc [ 3.221242] sd 3:0:0:0: Attached scsi generic sg2 type 0 [ 3.221381] sd 3:0:0:0: [sdc] 39070080 512-byte logical blocks: (20.0 GB/18.6 GiB) [ 3.221396] sd 3:0:0:0: [sdc] Write Protect is off [ 3.221399] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 3.221421] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.222107] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > [ 3.222501] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.237095] sdb: sdb1 [ 3.237340] sd 1:0:0:0: [sdb] Attached SCSI disk [ 3.277652] sdc: sdc1 [ 3.277946] sd 3:0:0:0: [sdc] Attached SCSI disk [ 3.549018] usb 1-3: new high-speed USB device number 4 using ehci-pci [ 3.701039] usb 1-3: New USB device found, idVendor=13fe, idProduct=4200 [ 3.701041] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.701042] usb 1-3: Product: USB DISK 2.0 [ 3.701043] usb 1-3: Manufacturer: [ 3.701044] usb 1-3: SerialNumber: 0701414891654F72 [ 3.701319] usb-storage 1-3:1.0: USB Mass Storage device detected [ 3.701411] scsi host7: usb-storage 1-3:1.0 [ 3.785769] scsi 2:0:0:0: Direct-Access SanDisk Cruzer 1.20 PQ: 0 ANSI: 5 [ 3.786537] sd 2:0:0:0: Attached scsi generic sg3 type 0 [ 3.789379] sd 2:0:0:0: [sdd] 31266816 512-byte logical blocks: (16.0 GB/14.9 GiB) [ 3.790388] sd 2:0:0:0: [sdd] Write Protect is off [ 3.790390] sd 2:0:0:0: [sdd] Mode Sense: 43 00 00 00 [ 3.791368] sd 2:0:0:0: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 3.796631] sdd: sdd1 [ 3.802281] sd 2:0:0:0: [sdd] Attached SCSI removable disk [ 4.081041] usb 4-2: new low-speed USB device number 2 using ohci-pci [ 4.272133] usb 4-2: New USB device found, idVendor=046d, idProduct=c315 [ 4.272135] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.272136] usb 4-2: Product: Logitech USB Keyboard [ 4.272137] usb 4-2: Manufacturer: Logitech [ 4.280403] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:12.1/usb4/4-2/4-2:1.0/0003:046D:C315.0003/input/input7 [ 4.337159] hid-generic 0003:046D:C315.0003: input,hidraw2: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:12.1-2/input0 [ 4.714141] scsi 7:0:0:0: Direct-Access USB DISK 2.0 PMAP PQ: 0 ANSI: 6 [ 4.714514] sd 7:0:0:0: Attached scsi generic sg4 type 0 [ 4.716127] sd 7:0:0:0: [sde] 15646720 512-byte logical blocks: (8.01 GB/7.46 GiB) [ 4.717386] sd 7:0:0:0: [sde] Write Protect is off [ 4.717388] sd 7:0:0:0: [sde] Mode Sense: 23 00 00 00 [ 4.718634] sd 7:0:0:0: [sde] No Caching mode page found [ 4.718639] sd 7:0:0:0: [sde] Assuming drive cache: write through [ 4.724633] sde: sde1 [ 4.728511] sd 7:0:0:0: [sde] Attached SCSI removable disk [ 4.891180] random: crng init done [ 5.012959] microcode: CPU0: new patch_level=0x010000c8 [ 5.012974] microcode: CPU1: new patch_level=0x010000c8 [ 5.193438] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [ 6.369589] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN) [ 6.369682] systemd[1]: Detected architecture x86-64. [ 6.383916] systemd[1]: Set hostname to . [ 7.999483] systemd[1]: Listening on Journal Audit Socket. [ 7.999558] systemd[1]: Started Trigger resolvconf update for networkd DNS. [ 7.999567] systemd[1]: Reached target Encrypted Volumes. [ 7.999589] systemd[1]: Listening on fsck to fsckd communication Socket. [ 7.999596] systemd[1]: Reached target User and Group Name Lookups. [ 7.999622] systemd[1]: Listening on udev Control Socket. [ 7.999647] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.813036] lp: driver loaded but no devices found [ 8.909398] ppdev: user-space parallel port driver [ 10.970853] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro [ 11.700000] systemd-journald[248]: Received request to flush runtime journal from PID 1 [ 13.190844] wmi: Mapper loaded [ 13.631447] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 15.246978] nvidia-uvm: Loaded the UVM driver in 8 mode, major device number 242 [ 15.911238] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xfc00, revision 0 [ 15.914131] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xfb00 [ 16.533789] NVRM: Your system is not currently configured to drive a VGA console [ 16.533791] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver [ 16.533792] NVRM: requires the use of a text-mode VGA console. Use of other console [ 16.533793] NVRM: drivers including, but not limited to, vesafb, may result in [ 16.533793] NVRM: corruption and stability problems, and is not supported. [ 16.539027] snd_hda_intel 0000:02:00.1: Disabling MSI [ 16.539076] snd_hda_intel 0000:02:00.1: Handle vga_switcheroo audio client [ 16.782849] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC662 rev1: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line [ 16.782851] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=1 (0x15/0x0/0x0/0x0/0x0) [ 16.782852] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 16.782853] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 16.782854] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 16.782855] snd_hda_codec_realtek hdaudioC0D0: Mic=0x19 [ 16.782856] snd_hda_codec_realtek hdaudioC0D0: Line=0x18 [ 16.793401] input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8 [ 16.793481] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input9 [ 16.793526] input: HDA ATI SB Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input10 [ 16.793569] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input11 [ 17.053879] usbcore: registered new interface driver snd-usb-audio [ 17.240858] kvm: Nested Virtualization enabled [ 17.240860] kvm: Nested Paging enabled [ 17.262549] EDAC MC: Ver: 3.0.0 [ 17.272931] MCE: In-kernel MCE decoding enabled. [ 17.275678] EDAC amd64: DRAM ECC disabled. [ 17.275679] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 17.481088] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:02:00.1/sound/card1/input12 [ 17.481167] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:02:00.1/sound/card1/input13 [ 18.395395] audit: type=1400 audit(1501168547.223:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="docker-default" pid=690 comm="apparmor_parser" [ 18.434161] audit: type=1400 audit(1501168547.263:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=692 comm="apparmor_parser" [ 18.434164] audit: type=1400 audit(1501168547.263:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=692 comm="apparmor_parser" [ 18.434164] audit: type=1400 audit(1501168547.263:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=692 comm="apparmor_parser" [ 18.434165] audit: type=1400 audit(1501168547.263:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=692 comm="apparmor_parser" [ 18.574201] audit: type=1400 audit(1501168547.403:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=691 comm="apparmor_parser" [ 18.574204] audit: type=1400 audit(1501168547.403:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=691 comm="apparmor_parser" [ 18.600969] audit: type=1400 audit(1501168547.431:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/2462/usr/lib/snapd/snap-confine" pid=694 comm="apparmor_parser" [ 18.600972] audit: type=1400 audit(1501168547.431:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/2462/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=694 comm="apparmor_parser" [ 18.602009] audit: type=1400 audit(1501168547.431:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/2381/usr/lib/snapd/snap-confine" pid=693 comm="apparmor_parser" [ 20.828642] input: HP WMI hotkeys as /devices/virtual/input/input14 [ 24.020458] Adding 8381436k swap on /dev/sda6. Priority:-1 extents:1 across:8381436k FS [ 35.860943] IPv6: ADDRCONF(NETDEV_UP): enp63s0: link is not ready [ 36.100081] IPv6: ADDRCONF(NETDEV_UP): enp63s0: link is not ready [ 36.639450] kauditd_printk_skb: 22 callbacks suppressed [ 36.639451] audit: type=1400 audit(1501168565.467:34): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="docker-default" pid=1524 comm="apparmor_parser" [ 37.025663] aufs 4.x-rcN-20170206 [ 37.901858] audit: type=1400 audit(1501168566.731:35): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/snap/core/2462/usr/lib/snapd/snap-confine" pid=1538 comm="apparmor_parser" [ 37.916153] audit: type=1400 audit(1501168566.747:36): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/snap/core/2462/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=1538 comm="apparmor_parser" [ 37.920584] audit: type=1400 audit(1501168566.751:37): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.core.hook.configure" pid=1541 comm="apparmor_parser" [ 39.544687] audit: type=1400 audit(1501168568.375:38): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.tmx.tmx" pid=1549 comm="apparmor_parser" [ 39.599296] tg3 0000:3f:00.0 enp63s0: Link is up at 1000 Mbps, full duplex [ 39.599298] tg3 0000:3f:00.0 enp63s0: Flow control is on for TX and on for RX [ 39.599314] IPv6: ADDRCONF(NETDEV_CHANGE): enp63s0: link becomes ready [ 39.653115] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 39.654518] Bridge firewalling registered [ 39.845578] nf_conntrack version 0.5.0 (65536 buckets, 262144 max) [ 40.228932] ip_tables: (C) 2000-2006 Netfilter Core Team [ 40.481007] Initializing XFRM netlink socket [ 40.524697] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready [ 40.567673] IPv6: ADDRCONF(NETDEV_UP): br-62080d958585: link is not ready [ 45.311708] vboxdrv: Found 2 processor cores [ 45.331779] vboxdrv: TSC mode is Invariant, tentative frequency 3391500452 Hz [ 45.331780] vboxdrv: Successfully loaded version 5.0.40_Ubuntu (interface 0x00240000) [ 45.337922] VBoxNetFlt: Successfully started. [ 45.535359] VBoxNetAdp: Successfully started. [ 45.629302] VBoxPciLinuxInit [ 45.787937] vboxpci: IOMMU not found (not registered) [ 47.758412] nvidia-modeset: Allocated GPU:0 (GPU-4ef0815f-1559-7097-981f-4f334a28ab62) @ PCI:0000:02:00.0 [ 56.183260] snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 5 [ 65.730976] FAT-fs (sdd1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 4547.382766] FAT-fs (loop3): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [18344.214115] usb 2-2: new high-speed USB device number 4 using ehci-pci [18344.363583] usb 2-2: New USB device found, idVendor=0781, idProduct=5530 [18344.363591] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [18344.363595] usb 2-2: Product: Cruzer [18344.363599] usb 2-2: Manufacturer: SanDisk [18344.363602] usb 2-2: SerialNumber: 20053550510C9362E7F3 [18344.364989] usb-storage 2-2:1.0: USB Mass Storage device detected [18344.368127] scsi host8: usb-storage 2-2:1.0 [18345.380072] scsi 8:0:0:0: Direct-Access SanDisk Cruzer 1.00 PQ: 0 ANSI: 2 [18345.381715] sd 8:0:0:0: Attached scsi generic sg5 type 0 [18345.382762] sd 8:0:0:0: [sdf] 7837696 512-byte logical blocks: (4.01 GB/3.74 GiB) [18345.384406] sd 8:0:0:0: [sdf] Write Protect is off [18345.384410] sd 8:0:0:0: [sdf] Mode Sense: 03 00 00 00 [18345.385403] sd 8:0:0:0: [sdf] No Caching mode page found [18345.385410] sd 8:0:0:0: [sdf] Assuming drive cache: write through [18345.399401] sdf: sdf1 [18345.403907] sd 8:0:0:0: [sdf] Attached SCSI removable disk [19301.322235] aufs au_opts_verify:1585:dockerd[1520]: dirperm1 breaks the protection by the permission bits on the lower branch [19302.380667] br-62080d958585: port 1(vethd5097ed) entered blocking state [19302.380670] br-62080d958585: port 1(vethd5097ed) entered disabled state [19302.380817] device vethd5097ed entered promiscuous mode [19302.380973] IPv6: ADDRCONF(NETDEV_UP): vethd5097ed: link is not ready [19303.479929] eth0: renamed from vethc32c5a9 [19303.494380] IPv6: ADDRCONF(NETDEV_CHANGE): vethd5097ed: link becomes ready [19303.494443] br-62080d958585: port 1(vethd5097ed) entered blocking state [19303.494444] br-62080d958585: port 1(vethd5097ed) entered forwarding state [19303.494478] IPv6: ADDRCONF(NETDEV_CHANGE): br-62080d958585: link becomes ready [19305.683334] br-62080d958585: port 2(veth559353d) entered blocking state [19305.683337] br-62080d958585: port 2(veth559353d) entered disabled state [19305.683432] device veth559353d entered promiscuous mode [19305.683510] IPv6: ADDRCONF(NETDEV_UP): veth559353d: link is not ready [19306.194195] eth0: renamed from veth3f8ba8f [19306.214145] IPv6: ADDRCONF(NETDEV_CHANGE): veth559353d: link becomes ready [19306.214210] br-62080d958585: port 2(veth559353d) entered blocking state [19306.214212] br-62080d958585: port 2(veth559353d) entered forwarding state [19309.152112] br-62080d958585: port 3(vethe612a66) entered blocking state [19309.152114] br-62080d958585: port 3(vethe612a66) entered disabled state [19309.152375] device vethe612a66 entered promiscuous mode [19309.152581] IPv6: ADDRCONF(NETDEV_UP): vethe612a66: link is not ready [19310.655833] eth0: renamed from vethf5794af [19310.669943] IPv6: ADDRCONF(NETDEV_CHANGE): vethe612a66: link becomes ready [19310.670032] br-62080d958585: port 3(vethe612a66) entered blocking state [19310.670034] br-62080d958585: port 3(vethe612a66) entered forwarding state [19311.608741] br-62080d958585: port 3(vethe612a66) entered disabled state [19311.610729] vethf5794af: renamed from eth0 [19311.977438] br-62080d958585: port 3(vethe612a66) entered disabled state [19311.982052] device vethe612a66 left promiscuous mode [19311.982061] br-62080d958585: port 3(vethe612a66) entered disabled state