[   33.434521] init: plymouth-upstart-bridge main process ended, respawning
[   37.488785] wlan0: authenticate with 00:21:63:4a:0c:2c
[   37.490256] wlan0: send auth to 00:21:63:4a:0c:2c (try 1/3)
[   37.491988] wlan0: authenticated
[   37.492170] iwl3945 0000:03:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[   37.496058] wlan0: associate with 00:21:63:4a:0c:2c (try 1/3)
[   37.498632] wlan0: RX AssocResp from 00:21:63:4a:0c:2c (capab=0x411 status=0 aid=3)
[   37.502234] wlan0: associated
[   37.502319] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   37.873000] wlan0: deauthenticating from 00:21:63:4a:0c:2c by local choice (Reason: 2=PREV_AUTH_NOT_VALID)
[   37.921585] wlan0: authenticate with 00:21:63:4a:0c:2c
[   37.921625] wlan0: send auth to 00:21:63:4a:0c:2c (try 1/3)
[   37.923408] wlan0: authenticated
[   37.923967] iwl3945 0000:03:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[   37.924101] wlan0: associate with 00:21:63:4a:0c:2c (try 1/3)
[   37.925576] cfg80211: World regulatory domain updated:
[   37.925581] cfg80211:  DFS Master region: unset
[   37.925583] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   37.925587] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[   37.925591] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[   37.925594] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[   37.925597] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[   37.925600] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[   37.926666] wlan0: RX AssocResp from 00:21:63:4a:0c:2c (capab=0x411 status=0 aid=3)
[   37.928071] wlan0: associated
[   58.501462] audit: type=1400 audit(1537124027.629:34): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2100 comm="apparmor_parser"
[   58.501474] audit: type=1400 audit(1537124027.629:35): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2100 comm="apparmor_parser"
[  564.967588] perf interrupt took too long (2534 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[ 1336.304587] CE: hpet increased min_delta_ns to 20115 nsec
[ 1536.648397] perf interrupt took too long (5030 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
[ 1823.456366] systemd-hostnamed[3226]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[ 7909.120468] e1000e: eth0 NIC Link is Down
[ 7909.339048] wlan0: deauthenticating from 00:21:63:4a:0c:2c by local choice (Reason: 3=DEAUTH_LEAVING)
[ 7909.716686] cfg80211: World regulatory domain updated:
[ 7909.716695] cfg80211:  DFS Master region: unset
[ 7909.716698] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 7909.716702] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 7909.716706] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 7909.716709] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 7909.716713] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 7909.716716] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 7912.219263] PM: Syncing filesystems ... done.
[ 7912.451893] PM: Preparing system for sleep (mem)
[ 7912.539553] Freezing user space processes ... (elapsed 0.002 seconds) done.
[ 7912.541742] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 7912.542948] PM: Suspending system (mem)
[ 7912.542981] Suspending console(s) (use no_console_suspend to debug)
[ 7912.698225] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[ 7912.698422] sd 2:0:0:0: [sda] Stopping disk
[ 7912.792551] e1000e: EEE TX LPI TIMER: 00000000
[ 7913.168116] PM: suspend of devices complete after 624.835 msecs
[ 7913.184131] PM: late suspend of devices complete after 16.009 msecs
[ 7913.185070] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
[ 7913.185243] uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI
[ 7913.185279] uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI
[ 7913.224052] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
[ 7913.224072] ehci-pci 0000:00:1a.7: System wakeup enabled by ACPI
[ 7913.224110] uhci_hcd 0000:00:1a.0: System wakeup enabled by ACPI
[ 7913.224150] uhci_hcd 0000:00:1a.1: System wakeup enabled by ACPI
[ 7913.224165] e1000e 0000:00:19.0: System wakeup enabled by ACPI
[ 7913.240060] PM: noirq suspend of devices complete after 55.923 msecs
[ 7913.240279] ACPI: Preparing to enter system sleep state S3
[ 7913.420065] ACPI : EC: EC stopped
[ 7913.420066] PM: Saving platform NVS memory
[ 7913.420336] Disabling non-boot CPUs ...
[ 7913.420565] Broke affinity for irq 32
[ 7913.421591] smpboot: CPU 1 is now offline
[ 7913.432248] ACPI: Low-level resume complete
[ 7913.432248] ACPI : EC: EC started
[ 7913.432248] PM: Restoring platform NVS memory
[ 7913.432248] microcode: CPU0 microcode updated early to revision 0xa4, date = 2010-10-02
[ 7913.432248] Enabling non-boot CPUs ...
[ 7913.452287] x86: Booting SMP configuration:
[ 7913.452288] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 7913.421582] Initializing CPU#1
[ 7913.460215]  cache: parent cpu1 should not be sleeping
[ 7913.496146] CPU1 is up
[ 7913.497471] ACPI: Waking up from system sleep state S3
[ 7913.844357] uhci_hcd 0000:00:1a.0: System wakeup disabled by ACPI
[ 7913.844468] uhci_hcd 0000:00:1a.1: System wakeup disabled by ACPI
[ 7913.884079] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
[ 7913.884148] uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI
[ 7913.884192] uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI
[ 7913.884216] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 7913.884237] ehci-pci 0000:00:1a.7: System wakeup disabled by ACPI
[ 7913.884287] PM: noirq resume of devices complete after 40.154 msecs
[ 7913.884893] PM: early resume of devices complete after 0.518 msecs
[ 7913.888082] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[ 7913.888442] usb usb3: root hub lost power or was reset
[ 7913.888515] usb usb4: root hub lost power or was reset
[ 7913.898881] usb usb5: root hub lost power or was reset
[ 7913.898954] usb usb6: root hub lost power or was reset
[ 7913.899026] usb usb7: root hub lost power or was reset
[ 7913.899220] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
[ 7913.900230] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
[ 7913.900342] pciehp 0000:00:1c.4:pcie04: Timeout on hotplug command 0x1038 (issued 7913156 msec ago)
[ 7913.900368] pciehp 0000:00:1c.1:pcie04: Timeout on hotplug command 0x1038 (issued 7913156 msec ago)
[ 7913.900396] pciehp 0000:00:1c.2:pcie04: Timeout on hotplug command 0x1038 (issued 7913156 msec ago)
[ 7913.900420] pciehp 0000:00:1c.3:pcie04: Timeout on hotplug command 0x1038 (issued 7913156 msec ago)
[ 7913.900441] pciehp 0000:00:1c.0:pcie04: Timeout on hotplug command 0x1038 (issued 7913156 msec ago)
[ 7913.901788] ata2: port disabled--ignoring
[ 7913.902551] sd 2:0:0:0: [sda] Starting disk
[ 7914.004128] pciehp 0000:00:1c.1:pcie04: Device 0000:03:00.0 already exists at 0000:03:00, cannot hot-add
[ 7914.004130] pciehp 0000:00:1c.1:pcie04: Cannot add device at 0000:03:00
[ 7914.004216] rtc_cmos 00:02: System wakeup disabled by ACPI
[ 7914.877481] firewire_core 0000:15:00.1: rediscovered device fw0
[ 7914.910805] ata1.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
[ 7914.910808] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[ 7914.912992] ata1.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[ 7914.916608] ata1.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[ 7914.968503] ata1.00: configured for UDMA/33
[ 7914.988102] usb 3-2: reset full-speed USB device number 2 using uhci_hcd
[ 7915.077273] thinkpad_acpi: ACPI backlight control delay disabled
[ 7915.216184] PM: resume of devices complete after 1331.289 msecs
[ 7915.216542] PM: Finishing wakeup.
[ 7915.216544] Restarting tasks ... done.
[ 7916.280124] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 7916.318544] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 7916.318552] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 7916.318557] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 7916.327751] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 7916.327758] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 7916.327763] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 7916.328535] ata3.00: configured for UDMA/133
[ 7925.273106] video LNXVIDEO:00: Restoring backlight state
[ 7926.044538] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 7926.134413] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 7932.400747] wlan0: authenticate with 00:21:63:4a:0c:2c
[ 7932.402604] wlan0: send auth to 00:21:63:4a:0c:2c (try 1/3)
[ 7932.404357] wlan0: authenticated
[ 7932.404574] iwl3945 0000:03:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[ 7932.408111] wlan0: associate with 00:21:63:4a:0c:2c (try 1/3)
[ 7932.410723] wlan0: RX AssocResp from 00:21:63:4a:0c:2c (capab=0x411 status=0 aid=3)
[ 7932.412283] wlan0: associated
[ 7932.412344] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 7932.898384] wlan0: deauthenticating from 00:21:63:4a:0c:2c by local choice (Reason: 2=PREV_AUTH_NOT_VALID)
[ 7932.948806] wlan0: authenticate with 00:21:63:4a:0c:2c
[ 7932.948858] wlan0: send auth to 00:21:63:4a:0c:2c (try 1/3)
[ 7932.951896] wlan0: authenticated
[ 7932.953516] cfg80211: World regulatory domain updated:
[ 7932.953522] cfg80211:  DFS Master region: unset
[ 7932.953524] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 7932.953528] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 7932.953532] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 7932.953535] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 7932.953538] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 7932.953541] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 7932.954118] iwl3945 0000:03:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[ 7932.956285] wlan0: associate with 00:21:63:4a:0c:2c (try 1/3)
[ 7932.958866] wlan0: RX AssocResp from 00:21:63:4a:0c:2c (capab=0x411 status=0 aid=3)
[ 7932.960280] wlan0: associated
[10428.068099] usb 3-1: new full-speed USB device number 4 using uhci_hcd
[10428.231487] usb 3-1: New USB device found, idVendor=0a5c, idProduct=2110
[10428.231501] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[10428.231510] usb 3-1: Product: BCM2045B
[10428.231517] usb 3-1: Manufacturer: Broadcom Corp
[10429.064148] usb 3-1: USB disconnect, device number 4
[10433.768104] usb 3-1: new full-speed USB device number 5 using uhci_hcd
[10433.931491] usb 3-1: New USB device found, idVendor=0a5c, idProduct=2110
[10433.931504] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[10433.931513] usb 3-1: Product: BCM2045B
[10433.931521] usb 3-1: Manufacturer: Broadcom Corp
[10434.272172] usb 3-1: USB disconnect, device number 5
[10437.240143] usb 3-1: new full-speed USB device number 6 using uhci_hcd
[10437.403489] usb 3-1: New USB device found, idVendor=0a5c, idProduct=2110
[10437.403502] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[10437.403511] usb 3-1: Product: BCM2045B
[10437.403519] usb 3-1: Manufacturer: Broadcom Corp
[10437.744176] usb 3-1: USB disconnect, device number 6
[10444.184117] usb 3-1: new full-speed USB device number 7 using uhci_hcd
[10444.348482] usb 3-1: New USB device found, idVendor=0a5c, idProduct=2110
[10444.348496] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[10444.348504] usb 3-1: Product: BCM2045B
[10444.348512] usb 3-1: Manufacturer: Broadcom Corp
[10444.688108] usb 3-1: USB disconnect, device number 7
[10459.808119] usb 3-1: new full-speed USB device number 8 using uhci_hcd
[10459.977475] usb 3-1: New USB device found, idVendor=0a5c, idProduct=2110
[10459.977484] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[10459.977489] usb 3-1: Product: BCM2045B
[10459.977494] usb 3-1: Manufacturer: Broadcom Corp
[10460.312235] usb 3-1: USB disconnect, device number 8
[10462.536112] usb 3-1: new full-speed USB device number 9 using uhci_hcd
[10462.700504] usb 3-1: New USB device found, idVendor=0a5c, idProduct=2110
[10462.700517] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[10462.700525] usb 3-1: Product: BCM2045B
[10462.700533] usb 3-1: Manufacturer: Broadcom Corp
[10463.040170] usb 3-1: USB disconnect, device number 9
[10464.520113] usb 3-1: new full-speed USB device number 10 using uhci_hcd
[10464.686496] usb 3-1: New USB device found, idVendor=0a5c, idProduct=2110
[10464.686510] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[10464.686518] usb 3-1: Product: BCM2045B
[10464.686526] usb 3-1: Manufacturer: Broadcom Corp
[10465.024231] usb 3-1: USB disconnect, device number 10
[10597.630010] systemd-hostnamed[6809]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[12869.770513] systemd-hostnamed[7037]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[13893.793578] systemd-hostnamed[7152]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!