[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.38-8-generic (buildd@vernadsky) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu3) ) #42-Ubuntu SMP Mon Apr 11 03:31:50 UTC 2011 (Ubuntu 2.6.38-8.42-generic 2.6.38.2) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d800 (usable) [ 0.000000] BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf790000 (usable) [ 0.000000] BIOS-e820: 00000000bf790000 - 00000000bf79e000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bf79e000 - 00000000bf7d0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf7d0000 - 00000000bf7e0000 (reserved) [ 0.000000] BIOS-e820: 00000000bf7ec000 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 00000001c0000000 (usable) [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled in hardware: non-PAE kernel! [ 0.000000] NX (Execute Disable) protection: approximated by x86 segment limits [ 0.000000] DMI present. [ 0.000000] DMI: Acer Aspire M7721/FX58M, BIOS P01-A1 11/25/2009 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0xbf790 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-DFFFF uncachable [ 0.000000] E0000-E3FFF write-protect [ 0.000000] E4000-E7FFF write-through [ 0.000000] E8000-EBFFF write-protect [ 0.000000] EC000-EFFFF write-through [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 1C0000000 mask FC0000000 uncachable [ 0.000000] 1 base 000000000 mask E00000000 write-back [ 0.000000] 2 base 0C0000000 mask FC0000000 uncachable [ 0.000000] 3 base 0BF800000 mask FFF800000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000bf800000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] found SMP MP-table at [c00ff780] ff780 [ 0.000000] initial memory mapped : 0 - 01c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000 [ 0.000000] RAMDISK: 36e5f000 - 37ff0000 [ 0.000000] Allocated new RAMDISK: 35cce000 - 36e5eb27 [ 0.000000] Move RAMDISK from 0000000036e5f000 - 0000000037fefb26 to 35cce000 - 36e5eb26 [ 0.000000] ACPI: RSDP 000fa420 00024 (v02 ACPIAM) [ 0.000000] ACPI: XSDT bf790100 00064 (v01 ACRSYS ACRPRDCT 20091125 MSFT 00000097) [ 0.000000] ACPI: FACP bf790290 000F4 (v04 ACRSYS FACP2012 20091125 MSFT 00000097) [ 0.000000] ACPI: DSDT bf7905f0 0721C (v02 975A1 975A1P03 00000004 INTL 20051117) [ 0.000000] ACPI: FACS bf79e000 00040 [ 0.000000] ACPI: APIC bf790390 00098 (v02 ACRSYS APIC2012 20091125 MSFT 00000097) [ 0.000000] ACPI: MCFG bf790430 0003C (v01 ACRSYS OEMMCFG 20091125 MSFT 00000097) [ 0.000000] ACPI: SLIC bf790470 00176 (v01 ACRSYS ACRPRDCT 20091125 MSFT 00000097) [ 0.000000] ACPI: OEMB bf79e040 0007A (v01 ACRSYS OEMB2012 20091125 MSFT 00000097) [ 0.000000] ACPI: HPET bf7985f0 00038 (v01 ACRSYS OEMHPET 20091125 MSFT 00000097) [ 0.000000] ACPI: AWMI bf79e0c0 0004E (v01 ACRSYS OEMB2012 20091125 MSFT 00000097) [ 0.000000] ACPI: SSDT bf7a03a0 00363 (v01 DpgPmm CpuPm 00000012 INTL 20051117) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 2175MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x000bf790 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009d [ 0.000000] 0: 0x00000100 -> 0x000bf790 [ 0.000000] On node 0 totalpages: 784157 [ 0.000000] free_area_init_node: node 0, pgdat c1784100, node_mem_map f44de200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3949 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 4352 pages used for memmap [ 0.000000] HighMem zone: 552594 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled) [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec8a000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 9, version 32, address 0xfec8a000, GSI 24-47 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000 [ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 64 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ee00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 13 pages/cpu @f7000000 s28800 r0 d24448 u524288 [ 0.000000] pcpu-alloc: s28800 r0 d24448 u524288 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 778029 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-8-generic root=UUID=5dc75d20-15dc-47f1-b24a-456e8e88aa91 ro [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 15685120 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:000bf790) [ 0.000000] Memory: 3068156k/3137088k available (5188k kernel code, 68472k reserved, 2540k data, 700k init, 2227784k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc178d000 - 0xc183c000 ( 700 kB) [ 0.000000] .data : 0xc15112a1 - 0xc178c480 (2540 kB) [ 0.000000] .text : 0xc1000000 - 0xc15112a1 (5188 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] NR_IRQS:2304 nr_irqs:1152 16 [ 0.000000] CPU 0 irqstacks, hard=f300a000 soft=f300c000 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.004000] Detected 2666.389 MHz processor. [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5332.77 BogoMIPS (lpj=10665556) [ 0.000118] pid_max: default: 32768 minimum: 301 [ 0.000189] Security Framework initialized [ 0.000253] AppArmor: AppArmor initialized [ 0.000308] Yama: becoming mindful. [ 0.000400] Mount-cache hash table entries: 512 [ 0.000547] Initializing cgroup subsys ns [ 0.000604] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup. [ 0.000681] Initializing cgroup subsys cpuacct [ 0.000740] Initializing cgroup subsys memory [ 0.000801] Initializing cgroup subsys devices [ 0.000858] Initializing cgroup subsys freezer [ 0.000914] Initializing cgroup subsys net_cls [ 0.000979] Initializing cgroup subsys blkio [ 0.001057] CPU: Physical Processor ID: 0 [ 0.001112] CPU: Processor Core ID: 0 [ 0.001170] mce: CPU supports 9 MCE banks [ 0.001232] CPU0: Thermal monitoring enabled (TM1) [ 0.001294] using mwait in idle threads. [ 0.003085] ACPI: Core revision 20110112 [ 0.031284] ftrace: allocating 23640 entries in 47 pages [ 0.037527] Enabling APIC mode: Flat. Using 2 I/O APICs [ 0.038023] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.077760] CPU0: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05 [ 0.224890] Performance Events: PEBS fmt1+, Nehalem events, Intel PMU driver. [ 0.225061] ... version: 3 [ 0.225116] ... bit width: 48 [ 0.225171] ... generic registers: 4 [ 0.225226] ... value mask: 0000ffffffffffff [ 0.225284] ... max period: 000000007fffffff [ 0.225341] ... fixed-purpose events: 3 [ 0.225396] ... event mask: 000000070000000f [ 0.225790] CPU 1 irqstacks, hard=f30ce000 soft=f30d8000 [ 0.225793] Booting Node 0, Processors #1 [ 0.236050] Initializing CPU#1 [ 0.332606] CPU 2 irqstacks, hard=f30e2000 soft=f30e4000 [ 0.332710] #2 [ 0.346091] Initializing CPU#2 [ 0.444186] CPU 3 irqstacks, hard=f30ee000 soft=f30f0000 [ 0.444290] #3 [ 0.454504] Initializing CPU#3 [ 0.551755] CPU 4 irqstacks, hard=f3106000 soft=f3108000 [ 0.551859] #4 [ 0.562173] Initializing CPU#4 [ 0.659284] CPU 5 irqstacks, hard=f3126000 soft=f3128000 [ 0.659389] #5 [ 0.669603] Initializing CPU#5 [ 0.766759] CPU 6 irqstacks, hard=f3158000 soft=f315a000 [ 0.766864] #6 [ 0.777176] Initializing CPU#6 [ 0.874349] CPU 7 irqstacks, hard=f3164000 soft=f3166000 [ 0.874454] #7 Ok. [ 0.884681] Initializing CPU#7 [ 0.981782] Brought up 8 CPUs [ 0.981891] Total of 8 processors activated (42506.01 BogoMIPS). [ 0.985892] devtmpfs: initialized [ 0.986911] print_constraints: dummy: [ 0.986989] Time: 22:07:07 Date: 04/19/11 [ 0.987075] NET: Registered protocol family 16 [ 0.987202] Trying to unpack rootfs image as initramfs... [ 0.987204] EISA bus registered [ 0.987210] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.987212] ACPI: bus type pci registered [ 0.987265] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.987267] PCI: not using MMCONFIG [ 0.987357] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=4 [ 0.987358] PCI: Using configuration type 1 for base access [ 0.988027] bio: create slab at 0 [ 0.989219] ACPI: EC: Look up EC in DSDT [ 0.990915] ACPI: Executed 1 blocks of module-level executable AML code [ 0.994108] ACPI: SSDT bf79e110 01C0C (v01 DpgPmm P001Ist 00000011 INTL 20051117) [ 0.994602] ACPI: Dynamic OEM Table Load: [ 0.994726] ACPI: SSDT (null) 01C0C (v01 DpgPmm P001Ist 00000011 INTL 20051117) [ 0.994964] ACPI: SSDT bf79fd20 00678 (v01 PmRef P001Cst 00003001 INTL 20051117) [ 0.995385] ACPI: Dynamic OEM Table Load: [ 0.995510] ACPI: SSDT (null) 00678 (v01 PmRef P001Cst 00003001 INTL 20051117) [ 1.014216] ACPI: Interpreter enabled [ 1.014273] ACPI: (supports S0 S3 S4 S5) [ 1.014477] ACPI: Using IOAPIC for interrupt routing [ 1.014550] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 1.016349] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 1.016426] PCI: Using MMCONFIG for extended config space [ 1.023633] ACPI: No dock devices found. [ 1.023690] HEST: Table not found. [ 1.023746] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.023892] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 1.024093] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 1.024154] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 1.024214] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 1.024289] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff] [ 1.024364] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff] [ 1.024439] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfed8ffff] [ 1.024526] pci 0000:00:00.0: [8086:3405] type 0 class 0x000600 [ 1.024568] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 1.024571] pci 0000:00:00.0: PME# disabled [ 1.024590] pci 0000:00:01.0: [8086:3408] type 1 class 0x000604 [ 1.024632] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 1.024635] pci 0000:00:01.0: PME# disabled [ 1.024655] pci 0000:00:03.0: [8086:340a] type 1 class 0x000604 [ 1.024696] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 1.024699] pci 0000:00:03.0: PME# disabled [ 1.024720] pci 0000:00:07.0: [8086:340e] type 1 class 0x000604 [ 1.024762] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 1.024765] pci 0000:00:07.0: PME# disabled [ 1.024788] pci 0000:00:13.0: [8086:342d] type 0 class 0x000800 [ 1.024798] pci 0000:00:13.0: reg 10: [mem 0xfec8a000-0xfec8afff] [ 1.024839] pci 0000:00:13.0: PME# supported from D0 D3hot D3cold [ 1.024841] pci 0000:00:13.0: PME# disabled [ 1.024855] pci 0000:00:14.0: [8086:342e] type 0 class 0x000800 [ 1.024912] pci 0000:00:14.1: [8086:3422] type 0 class 0x000800 [ 1.024967] pci 0000:00:14.2: [8086:3423] type 0 class 0x000800 [ 1.025020] pci 0000:00:14.3: [8086:3438] type 0 class 0x000800 [ 1.025078] pci 0000:00:19.0: [8086:10cd] type 0 class 0x000200 [ 1.025095] pci 0000:00:19.0: reg 10: [mem 0xf7ec0000-0xf7edffff] [ 1.025102] pci 0000:00:19.0: reg 14: [mem 0xf7ef2000-0xf7ef2fff] [ 1.025110] pci 0000:00:19.0: reg 18: [io 0xa080-0xa09f] [ 1.025155] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 1.025159] pci 0000:00:19.0: PME# disabled [ 1.025175] pci 0000:00:1a.0: [8086:3a37] type 0 class 0x000c03 [ 1.025214] pci 0000:00:1a.0: reg 20: [io 0xa400-0xa41f] [ 1.025256] pci 0000:00:1a.1: [8086:3a38] type 0 class 0x000c03 [ 1.025295] pci 0000:00:1a.1: reg 20: [io 0xa480-0xa49f] [ 1.025335] pci 0000:00:1a.2: [8086:3a39] type 0 class 0x000c03 [ 1.025375] pci 0000:00:1a.2: reg 20: [io 0xa800-0xa81f] [ 1.025423] pci 0000:00:1a.7: [8086:3a3c] type 0 class 0x000c03 [ 1.025446] pci 0000:00:1a.7: reg 10: [mem 0xf7ef8000-0xf7ef83ff] [ 1.025515] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 1.025518] pci 0000:00:1a.7: PME# disabled [ 1.025539] pci 0000:00:1b.0: [8086:3a3e] type 0 class 0x000403 [ 1.025553] pci 0000:00:1b.0: reg 10: [mem 0xf7ef4000-0xf7ef7fff 64bit] [ 1.025603] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 1.025606] pci 0000:00:1b.0: PME# disabled [ 1.025625] pci 0000:00:1d.0: [8086:3a34] type 0 class 0x000c03 [ 1.025665] pci 0000:00:1d.0: reg 20: [io 0xa880-0xa89f] [ 1.025705] pci 0000:00:1d.1: [8086:3a35] type 0 class 0x000c03 [ 1.025745] pci 0000:00:1d.1: reg 20: [io 0xac00-0xac1f] [ 1.025784] pci 0000:00:1d.2: [8086:3a36] type 0 class 0x000c03 [ 1.025824] pci 0000:00:1d.2: reg 20: [io 0xb000-0xb01f] [ 1.025872] pci 0000:00:1d.7: [8086:3a3a] type 0 class 0x000c03 [ 1.025892] pci 0000:00:1d.7: reg 10: [mem 0xf7efa000-0xf7efa3ff] [ 1.025960] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 1.025964] pci 0000:00:1d.7: PME# disabled [ 1.025981] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604 [ 1.026032] pci 0000:00:1f.0: [8086:3a16] type 0 class 0x000601 [ 1.026108] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff) [ 1.026221] pci 0000:00:1f.2: [8086:3a22] type 0 class 0x000106 [ 1.026238] pci 0000:00:1f.2: reg 10: [io 0xb880-0xb887] [ 1.026245] pci 0000:00:1f.2: reg 14: [io 0xb800-0xb803] [ 1.026252] pci 0000:00:1f.2: reg 18: [io 0xb480-0xb487] [ 1.026259] pci 0000:00:1f.2: reg 1c: [io 0xb400-0xb403] [ 1.026266] pci 0000:00:1f.2: reg 20: [io 0xb080-0xb09f] [ 1.026273] pci 0000:00:1f.2: reg 24: [mem 0xf7efc000-0xf7efc7ff] [ 1.026304] pci 0000:00:1f.2: PME# supported from D3hot [ 1.026307] pci 0000:00:1f.2: PME# disabled [ 1.026322] pci 0000:00:1f.3: [8086:3a30] type 0 class 0x000c05 [ 1.026335] pci 0000:00:1f.3: reg 10: [mem 0xf7effc00-0xf7effcff 64bit] [ 1.026355] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f] [ 1.026421] pci 0000:04:00.0: [197b:2363] type 0 class 0x000106 [ 1.026488] pci 0000:04:00.0: reg 24: [mem 0xfbefe000-0xfbefffff] [ 1.026521] pci 0000:04:00.0: PME# supported from D3hot [ 1.026525] pci 0000:04:00.0: PME# disabled [ 1.026547] pci 0000:04:00.1: [197b:2363] type 0 class 0x000101 [ 1.026565] pci 0000:04:00.1: reg 10: [io 0xec00-0xec07] [ 1.026576] pci 0000:04:00.1: reg 14: [io 0xe880-0xe883] [ 1.026586] pci 0000:04:00.1: reg 18: [io 0xe800-0xe807] [ 1.026597] pci 0000:04:00.1: reg 1c: [io 0xe480-0xe483] [ 1.026607] pci 0000:04:00.1: reg 20: [io 0xe400-0xe40f] [ 1.026668] pci 0000:00:01.0: PCI bridge to [bus 04-04] [ 1.026728] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 1.026731] pci 0000:00:01.0: bridge window [mem 0xfbe00000-0xfbefffff] [ 1.026735] pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 1.026778] pci 0000:03:00.0: [10de:05e3] type 0 class 0x000300 [ 1.026787] pci 0000:03:00.0: reg 10: [mem 0xfa000000-0xfaffffff] [ 1.026797] pci 0000:03:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref] [ 1.026807] pci 0000:03:00.0: reg 1c: [mem 0xf8000000-0xf9ffffff 64bit] [ 1.026814] pci 0000:03:00.0: reg 24: [io 0xdc00-0xdc7f] [ 1.026820] pci 0000:03:00.0: reg 30: [mem 0xfbd80000-0xfbdfffff pref] [ 1.026852] pci 0000:00:03.0: PCI bridge to [bus 03-03] [ 1.026912] pci 0000:00:03.0: bridge window [io 0xd000-0xdfff] [ 1.026915] pci 0000:00:03.0: bridge window [mem 0xf8000000-0xfbdfffff] [ 1.026919] pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 1.026952] pci 0000:00:07.0: PCI bridge to [bus 02-02] [ 1.027011] pci 0000:00:07.0: bridge window [io 0xf000-0x0000] (disabled) [ 1.027014] pci 0000:00:07.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 1.027019] pci 0000:00:07.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 1.027055] pci 0000:01:06.0: [1106:3044] type 0 class 0x000c00 [ 1.027071] pci 0000:01:06.0: reg 10: [mem 0xf7fff800-0xf7ffffff] [ 1.027081] pci 0000:01:06.0: reg 14: [io 0xcc00-0xcc7f] [ 1.027138] pci 0000:01:06.0: supports D2 [ 1.027139] pci 0000:01:06.0: PME# supported from D2 D3hot D3cold [ 1.027143] pci 0000:01:06.0: PME# disabled [ 1.027178] pci 0000:00:1e.0: PCI bridge to [bus 01-01] (subtractive decode) [ 1.027241] pci 0000:00:1e.0: bridge window [io 0xc000-0xcfff] [ 1.027244] pci 0000:00:1e.0: bridge window [mem 0xf7f00000-0xf7ffffff] [ 1.027249] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 1.027251] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 1.027253] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 1.027255] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 1.027257] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) [ 1.027258] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode) [ 1.027260] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode) [ 1.027275] pci_bus 0000:00: on NUMA node 0 [ 1.027277] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 1.027489] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT] [ 1.027521] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT] [ 1.027552] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE7._PRT] [ 1.027582] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 1.036637] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15) [ 1.037108] ACPI: PCI Interrupt Link [LNKB] (IRQs 5) *0, disabled. [ 1.037370] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12 14 15) [ 1.037845] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 14 *15) [ 1.038314] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *6 7 10 11 12 14 15) [ 1.038783] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 *7 10 11 12 14 15) [ 1.039252] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 6 7 10 11 12 14 15) [ 1.039722] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 10 11 12 *14 15) [ 1.040237] vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none [ 1.040313] vgaarb: loaded [ 1.040510] SCSI subsystem initialized [ 1.040604] libata version 3.00 loaded. [ 1.040637] usbcore: registered new interface driver usbfs [ 1.040701] usbcore: registered new interface driver hub [ 1.040776] usbcore: registered new device driver usb [ 1.040976] wmi: Mapper loaded [ 1.041030] PCI: Using ACPI for IRQ routing [ 1.041087] PCI: pci_cache_line_size set to 64 bytes [ 1.041162] reserve RAM buffer: 000000000009d800 - 000000000009ffff [ 1.041164] reserve RAM buffer: 00000000bf790000 - 00000000bfffffff [ 1.041234] NetLabel: Initializing [ 1.041288] NetLabel: domain hash size = 128 [ 1.041344] NetLabel: protocols = UNLABELED CIPSOv4 [ 1.041411] NetLabel: unlabeled traffic allowed by default [ 1.041493] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 1.041557] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 1.041786] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 1.065453] Switching to clocksource hpet [ 1.069250] Switched to NOHz mode on CPU #0 [ 1.069370] Switched to NOHz mode on CPU #1 [ 1.069396] Switched to NOHz mode on CPU #5 [ 1.069404] Switched to NOHz mode on CPU #7 [ 1.069431] Switched to NOHz mode on CPU #2 [ 1.069449] Switched to NOHz mode on CPU #6 [ 1.069454] Switched to NOHz mode on CPU #4 [ 1.069465] Switched to NOHz mode on CPU #3 [ 1.070836] AppArmor: AppArmor Filesystem Enabled [ 1.070910] pnp: PnP ACPI init [ 1.070976] ACPI: bus type pnp registered [ 1.071125] pnp 00:00: [bus 00-ff] [ 1.071127] pnp 00:00: [io 0x0cf8-0x0cff] [ 1.071129] pnp 00:00: [io 0x0000-0x0cf7 window] [ 1.071130] pnp 00:00: [io 0x0d00-0xffff window] [ 1.071132] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 1.071134] pnp 00:00: [mem 0x000d0000-0x000dffff window] [ 1.071135] pnp 00:00: [mem 0xc0000000-0xdfffffff window] [ 1.071137] pnp 00:00: [mem 0xf0000000-0xfed8ffff window] [ 1.071190] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 1.071198] pnp 00:01: [mem 0xfbf00000-0xfbffffff] [ 1.071200] pnp 00:01: [mem 0xfc000000-0xfcffffff] [ 1.071201] pnp 00:01: [mem 0xfd000000-0xfdffffff] [ 1.071203] pnp 00:01: [mem 0xfe000000-0xfebfffff] [ 1.071204] pnp 00:01: [mem 0xfec8a000-0xfec8afff] [ 1.071206] pnp 00:01: [mem 0xfed10000-0xfed10fff] [ 1.071245] system 00:01: [mem 0xfbf00000-0xfbffffff] has been reserved [ 1.071306] system 00:01: [mem 0xfc000000-0xfcffffff] has been reserved [ 1.071366] system 00:01: [mem 0xfd000000-0xfdffffff] has been reserved [ 1.071427] system 00:01: [mem 0xfe000000-0xfebfffff] has been reserved [ 1.071488] system 00:01: [mem 0xfec8a000-0xfec8afff] could not be reserved [ 1.071549] system 00:01: [mem 0xfed10000-0xfed10fff] has been reserved [ 1.071610] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active) [ 1.071653] pnp 00:02: [dma 4] [ 1.071655] pnp 00:02: [io 0x0000-0x000f] [ 1.071657] pnp 00:02: [io 0x0081-0x0083] [ 1.071658] pnp 00:02: [io 0x0087] [ 1.071659] pnp 00:02: [io 0x0089-0x008b] [ 1.071661] pnp 00:02: [io 0x008f] [ 1.071662] pnp 00:02: [io 0x00c0-0x00df] [ 1.071685] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 1.071693] pnp 00:03: [io 0x0070-0x0071] [ 1.071700] pnp 00:03: [irq 8] [ 1.071726] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 1.071733] pnp 00:04: [io 0x0061] [ 1.071755] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) [ 1.071762] pnp 00:05: [io 0x00f0-0x00ff] [ 1.071767] pnp 00:05: [irq 13] [ 1.071790] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) [ 1.072647] pnp 00:06: [io 0x0060] [ 1.072649] pnp 00:06: [io 0x0064] [ 1.072653] pnp 00:06: [irq 1] [ 1.072679] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 1.072712] pnp 00:07: [io 0x0060] [ 1.072713] pnp 00:07: [io 0x0064] [ 1.072717] pnp 00:07: [irq 12] [ 1.072742] pnp 00:07: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active) [ 1.072854] pnp 00:08: [io 0x0000-0xffffffff disabled] [ 1.072855] pnp 00:08: [io 0x0a00-0x0a0f] [ 1.072857] pnp 00:08: [io 0x0a10-0x0a1f] [ 1.072858] pnp 00:08: [io 0x0a20-0x0a2f] [ 1.072860] pnp 00:08: [io 0x0a30-0x0a3f] [ 1.072901] system 00:08: [io 0x0a00-0x0a0f] has been reserved [ 1.072961] system 00:08: [io 0x0a10-0x0a1f] has been reserved [ 1.073020] system 00:08: [io 0x0a20-0x0a2f] has been reserved [ 1.073079] system 00:08: [io 0x0a30-0x0a3f] has been reserved [ 1.073139] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.073229] pnp 00:09: [io 0x0010-0x001f] [ 1.073230] pnp 00:09: [io 0x0022-0x003f] [ 1.073232] pnp 00:09: [io 0x0044-0x005f] [ 1.073233] pnp 00:09: [io 0x0062-0x0063] [ 1.073235] pnp 00:09: [io 0x0065-0x006f] [ 1.073236] pnp 00:09: [io 0x0072-0x007f] [ 1.073237] pnp 00:09: [io 0x0080] [ 1.073239] pnp 00:09: [io 0x0084-0x0086] [ 1.073240] pnp 00:09: [io 0x0088] [ 1.073241] pnp 00:09: [io 0x008c-0x008e] [ 1.073243] pnp 00:09: [io 0x0090-0x009f] [ 1.073244] pnp 00:09: [io 0x00a2-0x00bf] [ 1.073245] pnp 00:09: [io 0x00e0-0x00ef] [ 1.073247] pnp 00:09: [io 0x04d0-0x04d1] [ 1.073248] pnp 00:09: [io 0x0800-0x087f] [ 1.073250] pnp 00:09: [io 0x0000-0xffffffff disabled] [ 1.073251] pnp 00:09: [io 0x0480-0x04ff] [ 1.073253] pnp 00:09: [mem 0xfed1c000-0xfed1ffff] [ 1.073254] pnp 00:09: [mem 0xfed20000-0xfed3ffff] [ 1.073256] pnp 00:09: [mem 0xfed40000-0xfed8ffff] [ 1.073314] system 00:09: [io 0x04d0-0x04d1] has been reserved [ 1.073374] system 00:09: [io 0x0800-0x087f] has been reserved [ 1.073433] system 00:09: [io 0x0480-0x04ff] could not be reserved [ 1.073493] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 1.073554] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved [ 1.073615] system 00:09: [mem 0xfed40000-0xfed8ffff] has been reserved [ 1.073678] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.073731] pnp 00:0a: [mem 0xfed00000-0xfed003ff] [ 1.073757] pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active) [ 1.073819] pnp 00:0b: [io 0x0060] [ 1.073820] pnp 00:0b: [io 0x0064] [ 1.073822] pnp 00:0b: [mem 0xfec00000-0xfec00fff] [ 1.073823] pnp 00:0b: [mem 0xfee00000-0xfee00fff] [ 1.073865] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved [ 1.073926] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved [ 1.073987] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.074442] pnp 00:0c: [io 0x03f8-0x03ff] [ 1.074447] pnp 00:0c: [irq 4] [ 1.074448] pnp 00:0c: [dma 0 disabled] [ 1.074522] pnp 00:0c: Plug and Play ACPI device, IDs PNP0501 (active) [ 1.074548] pnp 00:0d: [mem 0xe0000000-0xefffffff] [ 1.074590] system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved [ 1.074652] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.074793] pnp 00:0e: [mem 0x00000000-0x0009ffff] [ 1.074795] pnp 00:0e: [mem 0x000c0000-0x000cffff] [ 1.074797] pnp 00:0e: [mem 0x000e0000-0x000fffff] [ 1.074799] pnp 00:0e: [mem 0x00100000-0xbfffffff] [ 1.074800] pnp 00:0e: [mem 0xfed90000-0xffffffff] [ 1.074853] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved [ 1.074915] system 00:0e: [mem 0x000c0000-0x000cffff] could not be reserved [ 1.074976] system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved [ 1.075037] system 00:0e: [mem 0x00100000-0xbfffffff] could not be reserved [ 1.075098] system 00:0e: [mem 0xfed90000-0xffffffff] could not be reserved [ 1.075160] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active) [ 1.075264] pnp: PnP ACPI: found 15 devices [ 1.075319] ACPI: ACPI bus type pnp unregistered [ 1.075377] PnPBIOS: Disabled by ACPI PNP [ 1.111263] pci 0000:00:01.0: PCI bridge to [bus 04-04] [ 1.111324] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 1.111385] pci 0000:00:01.0: bridge window [mem 0xfbe00000-0xfbefffff] [ 1.111447] pci 0000:00:01.0: bridge window [mem pref disabled] [ 1.111509] pci 0000:00:03.0: PCI bridge to [bus 03-03] [ 1.111568] pci 0000:00:03.0: bridge window [io 0xd000-0xdfff] [ 1.111629] pci 0000:00:03.0: bridge window [mem 0xf8000000-0xfbdfffff] [ 1.111691] pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 1.111769] pci 0000:00:07.0: PCI bridge to [bus 02-02] [ 1.111827] pci 0000:00:07.0: bridge window [io disabled] [ 1.111887] pci 0000:00:07.0: bridge window [mem disabled] [ 1.111947] pci 0000:00:07.0: bridge window [mem pref disabled] [ 1.112009] pci 0000:00:1e.0: PCI bridge to [bus 01-01] [ 1.112068] pci 0000:00:1e.0: bridge window [io 0xc000-0xcfff] [ 1.112129] pci 0000:00:1e.0: bridge window [mem 0xf7f00000-0xf7ffffff] [ 1.112191] pci 0000:00:1e.0: bridge window [mem pref disabled] [ 1.112260] pci 0000:00:01.0: setting latency timer to 64 [ 1.112265] pci 0000:00:03.0: setting latency timer to 64 [ 1.112271] pci 0000:00:07.0: setting latency timer to 64 [ 1.112276] pci 0000:00:1e.0: setting latency timer to 64 [ 1.112279] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 1.112281] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 1.112283] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 1.112284] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] [ 1.112286] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff] [ 1.112288] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff] [ 1.112290] pci_bus 0000:04: resource 0 [io 0xe000-0xefff] [ 1.112291] pci_bus 0000:04: resource 1 [mem 0xfbe00000-0xfbefffff] [ 1.112293] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff] [ 1.112295] pci_bus 0000:03: resource 1 [mem 0xf8000000-0xfbdfffff] [ 1.112297] pci_bus 0000:03: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 1.112299] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff] [ 1.112300] pci_bus 0000:01: resource 1 [mem 0xf7f00000-0xf7ffffff] [ 1.112302] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7] [ 1.112304] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff] [ 1.112305] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff] [ 1.112307] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff] [ 1.112309] pci_bus 0000:01: resource 8 [mem 0xc0000000-0xdfffffff] [ 1.112310] pci_bus 0000:01: resource 9 [mem 0xf0000000-0xfed8ffff] [ 1.112340] NET: Registered protocol family 2 [ 1.112440] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 1.112637] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 1.112925] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 1.113073] TCP: Hash tables configured (established 131072 bind 65536) [ 1.113134] TCP reno registered [ 1.113188] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 1.113249] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 1.113365] NET: Registered protocol family 1 [ 1.113565] pci 0000:03:00.0: Boot video device [ 1.113570] PCI: CLS 64 bytes, default 64 [ 1.113956] cpufreq-nforce2: No nForce2 chipset. [ 1.114145] audit: initializing netlink socket (disabled) [ 1.114208] type=2000 audit(1303250826.836:1): initialized [ 1.121947] highmem bounce pool size: 64 pages [ 1.122006] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 1.123350] VFS: Disk quotas dquot_6.5.2 [ 1.123450] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.123989] fuse init (API version 7.16) [ 1.124111] msgmni has been set to 1641 [ 1.124333] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.124426] io scheduler noop registered [ 1.124482] io scheduler deadline registered [ 1.124547] io scheduler cfq registered (default) [ 1.124783] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.124858] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.124953] intel_idle: MWAIT substates: 0x1120 [ 1.124963] intel_idle: v0.4 model 0x1A [ 1.124965] intel_idle: lapic_timer_reliable_states 0x2 [ 1.125067] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 1.125145] ACPI: Power Button [PWRB] [ 1.125232] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.125308] ACPI: Power Button [PWRF] [ 1.125522] ACPI: acpi_idle yielding to intel_idle [ 1.128481] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.128540] ACPI: Thermal Zone [THRM] (23 C) [ 1.128637] ERST: Table is not found! [ 1.128736] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.128742] isapnp: Scanning for PnP cards... [ 1.149204] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.331557] Freeing initrd memory: 17988k freed [ 1.481344] isapnp: No Plug & Play device found [ 1.503319] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.503600] Linux agpgart interface v0.103 [ 1.504597] brd: module loaded [ 1.505089] loop: module loaded [ 1.505205] i2c-core: driver [adp5520] using legacy suspend method [ 1.505265] i2c-core: driver [adp5520] using legacy resume method [ 1.505416] pata_acpi 0000:04:00.1: enabling device (0000 -> 0001) [ 1.505489] pata_acpi 0000:04:00.1: PCI INT B -> GSI 40 (level, low) -> IRQ 40 [ 1.505582] pata_acpi 0000:04:00.1: setting latency timer to 64 [ 1.505593] pata_acpi 0000:04:00.1: PCI INT B disabled [ 1.505888] Fixed MDIO Bus: probed [ 1.505967] PPP generic driver version 2.4.2 [ 1.506050] tun: Universal TUN/TAP device driver, 1.6 [ 1.506107] tun: (C) 1999-2004 Max Krasnyansky [ 1.506224] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.506299] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.506367] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 1.506369] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 1.506455] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 1.506567] ehci_hcd 0000:00:1a.7: debug port 1 [ 1.510501] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported [ 1.510515] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf7ef8000 [ 1.525622] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 1.525791] hub 1-0:1.0: USB hub found [ 1.525848] hub 1-0:1.0: 6 ports detected [ 1.525965] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.526034] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1.526037] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 1.526126] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 1.529656] ehci_hcd 0000:00:1d.7: debug port 1 [ 1.533601] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 1.533617] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7efa000 [ 1.545619] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.547048] hub 2-0:1.0: USB hub found [ 1.547105] hub 2-0:1.0: 6 ports detected [ 1.547216] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.547283] uhci_hcd: USB Universal Host Controller Interface driver [ 1.547362] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.547427] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 1.547429] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 1.547514] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 1.549655] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000a400 [ 1.549808] hub 3-0:1.0: USB hub found [ 1.549865] hub 3-0:1.0: 2 ports detected [ 1.549974] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 1.550038] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 1.550041] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 1.550124] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 1.550239] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000a480 [ 1.550387] hub 4-0:1.0: USB hub found [ 1.550444] hub 4-0:1.0: 2 ports detected [ 1.550552] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 1.550616] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 1.550618] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 1.550701] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 1.550816] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000a800 [ 1.550967] hub 5-0:1.0: USB hub found [ 1.551024] hub 5-0:1.0: 2 ports detected [ 1.551127] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.551191] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.551193] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.551275] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 1.551383] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000a880 [ 1.551529] hub 6-0:1.0: USB hub found [ 1.551585] hub 6-0:1.0: 2 ports detected [ 1.551687] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.551750] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1.551753] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.551836] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 1.551944] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000ac00 [ 1.552092] hub 7-0:1.0: USB hub found [ 1.552148] hub 7-0:1.0: 2 ports detected [ 1.552252] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.552316] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 1.552318] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.552401] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 1.552508] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b000 [ 1.552653] hub 8-0:1.0: USB hub found [ 1.552710] hub 8-0:1.0: 2 ports detected [ 1.552876] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 1.553315] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.553381] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.553506] mousedev: PS/2 mouse device common for all mice [ 1.553653] rtc_cmos 00:03: RTC can wake from S4 [ 1.553803] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 1.553884] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.554005] device-mapper: uevent: version 1.0.3 [ 1.554120] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com [ 1.554244] device-mapper: multipath: version 1.2.0 loaded [ 1.554303] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1.554411] EISA: Probing bus 0 at eisa.0 [ 1.554466] EISA: Cannot allocate resource for mainboard [ 1.554524] Cannot allocate resource for EISA slot 1 [ 1.554581] Cannot allocate resource for EISA slot 2 [ 1.554638] Cannot allocate resource for EISA slot 3 [ 1.554695] Cannot allocate resource for EISA slot 4 [ 1.554752] Cannot allocate resource for EISA slot 5 [ 1.554808] Cannot allocate resource for EISA slot 6 [ 1.554865] Cannot allocate resource for EISA slot 7 [ 1.554923] Cannot allocate resource for EISA slot 8 [ 1.554980] EISA: Detected 0 cards. [ 1.555222] cpuidle: using governor ladder [ 1.555532] cpuidle: using governor menu [ 1.555779] TCP cubic registered [ 1.555922] NET: Registered protocol family 10 [ 1.556369] NET: Registered protocol family 17 [ 1.556435] Registering the dns_resolver key type [ 1.560565] Using IPI No-Shortcut mode [ 1.560704] PM: Hibernation image not present or could not be loaded. [ 1.560711] registered taskstats version 1 [ 1.561016] Magic number: 7:813:148 [ 1.561085] bdi 1:0: hash matches [ 1.561153] pci 0000:00:14.1: hash matches [ 1.561213] acpi device:19: hash matches [ 1.561410] rtc_cmos 00:03: setting system clock to 2011-04-19 22:07:08 UTC (1303250828) [ 1.561495] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.561553] EDD information not available. [ 1.561804] Freeing unused kernel memory: 700k freed [ 1.562057] Write protecting the kernel text: 5192k [ 1.562428] Write protecting the kernel read-only data: 2148k [ 1.585381] <30>udev[90]: starting version 167 [ 1.612458] pata_jmicron 0000:04:00.1: PCI INT B -> GSI 40 (level, low) -> IRQ 40 [ 1.612561] pata_jmicron 0000:04:00.1: setting latency timer to 64 [ 1.612900] scsi0 : pata_jmicron [ 1.613073] scsi1 : pata_jmicron [ 1.613180] ata1: PATA max UDMA/100 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 40 [ 1.613245] ata2: PATA max UDMA/100 cmd 0xe800 ctl 0xe480 bmdma 0xe408 irq 40 [ 1.618797] e1000e: Intel(R) PRO/1000 Network Driver - 1.2.20-k2 [ 1.618858] e1000e: Copyright(c) 1999 - 2011 Intel Corporation. [ 1.618936] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.619001] e1000e 0000:00:19.0: setting latency timer to 64 [ 1.619071] e1000e 0000:00:19.0: irq 64 for MSI/MSI-X [ 1.841686] usb 1-3: new high speed USB device using ehci_hcd and address 2 [ 1.915921] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:22:68:65:37:ed [ 1.915998] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection [ 1.916080] e1000e 0000:00:19.0: eth0: MAC: 7, PHY: 8, PBA No: FFFFFF-0FF [ 1.916240] ahci 0000:00:1f.2: version 3.0 [ 1.916254] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.916374] ahci 0000:00:1f.2: irq 65 for MSI/MSI-X [ 1.916409] ahci: SSS flag set, parallel bus scan disabled [ 1.916505] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 1.916582] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs [ 1.916661] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.940726] firewire_ohci 0000:01:06.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 1.952576] [drm] Initialized drm 1.1.0 20060810 [ 1.958377] scsi2 : ahci [ 1.958665] scsi3 : ahci [ 1.958930] scsi4 : ahci [ 1.959192] scsi5 : ahci [ 1.959446] scsi6 : ahci [ 1.959696] scsi7 : ahci [ 1.959868] ata3: SATA max UDMA/133 abar m2048@0xf7efc000 port 0xf7efc100 irq 65 [ 1.959944] ata4: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 65 [ 1.960020] ata5: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 65 [ 1.960097] ata6: SATA max UDMA/133 irq_stat 0x00400040, connection status changed [ 1.960173] ata7: SATA max UDMA/133 irq_stat 0x00400040, connection status changed [ 1.960249] ata8: SATA max UDMA/133 irq_stat 0x00400040, connection status changed [ 1.960343] ahci 0000:04:00.0: PCI INT A -> GSI 28 (level, low) -> IRQ 28 [ 1.973727] ahci 0000:04:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 1.973812] ahci 0000:04:00.0: flags: 64bit ncq led clo pmp pio [ 1.973873] ahci 0000:04:00.0: setting latency timer to 64 [ 1.974270] scsi8 : ahci [ 1.974607] scsi9 : ahci [ 1.974782] ata9: SATA max UDMA/133 abar m8192@0xfbefe000 port 0xfbefe100 irq 28 [ 1.974864] ata10: SATA max UDMA/133 abar m8192@0xfbefe000 port 0xfbefe180 irq 28 [ 1.980757] usb 1-3: config 1 interface 1 altsetting 0 endpoint 0x83 has an invalid bInterval 30, changing to 8 [ 1.991171] usbcore: registered new interface driver uas [ 2.001764] firewire_ohci: Added fw-ohci device 0000:01:06.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x11 [ 2.109672] Refined TSC clocksource calibration: 2666.258 MHz. [ 2.109738] Switching to clocksource tsc [ 2.153661] usb 2-3: new high speed USB device using ehci_hcd and address 2 [ 2.277649] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.284165] ata3.00: ATA-7: SAMSUNG HD103UJ, 1AA01113, max UDMA7 [ 2.284231] ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 2.287718] hub 2-3:1.0: USB hub found [ 2.288064] hub 2-3:1.0: 4 ports detected [ 2.290857] ata3.00: configured for UDMA/133 [ 2.291175] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD103UJ 1AA0 PQ: 0 ANSI: 5 [ 2.291405] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 2.291464] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 2.291503] sd 2:0:0:0: [sda] Write Protect is off [ 2.291505] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.291517] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.293609] ata9: SATA link down (SStatus 0 SControl 300) [ 2.297638] ata10: SATA link down (SStatus 0 SControl 300) [ 2.299772] sda: sda1 sda2 sda3 sda4 [ 2.300160] sd 2:0:0:0: [sda] Attached SCSI disk [ 2.501675] firewire_core: created device fw0: GUID 00016c2000d086f6, S400 [ 2.529599] usb 4-2: new low speed USB device using uhci_hcd and address 2 [ 2.785881] usb 2-3.2: new high speed USB device using ehci_hcd and address 3 [ 2.878248] usb 2-3.2: config 1 interface 0 altsetting 0 bulk endpoint 0x1 has invalid maxpacket 64 [ 2.878335] usb 2-3.2: config 1 interface 0 altsetting 0 bulk endpoint 0x81 has invalid maxpacket 64 [ 2.949867] usb 2-3.3: new low speed USB device using ehci_hcd and address 4 [ 3.017541] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.046410] ata4.00: ATA-8: ST31500341AS, CC4H, max UDMA/133 [ 3.046477] ata4.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 3.088521] ata4.00: configured for UDMA/133 [ 3.090165] scsi 3:0:0:0: Direct-Access ATA ST31500341AS CC4H PQ: 0 ANSI: 5 [ 3.090409] sd 3:0:0:0: Attached scsi generic sg1 type 0 [ 3.090449] sd 3:0:0:0: [sdb] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB) [ 3.090539] sd 3:0:0:0: [sdb] Write Protect is off [ 3.090541] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.090579] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.151310] sdb: sdb1 sdb2 sdb3 < sdb5 sdb6 > [ 3.151794] sd 3:0:0:0: [sdb] Attached SCSI disk [ 3.813350] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.830958] ata5.00: ATA-8: WDC WD20EARS-00MVWB0, 51.0AB51, max UDMA/133 [ 3.831026] ata5.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 3.836032] ata5.00: configured for UDMA/133 [ 3.836323] scsi 4:0:0:0: Direct-Access ATA WDC WD20EARS-00M 51.0 PQ: 0 ANSI: 5 [ 3.836566] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 3.836586] sd 4:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 3.836671] sd 4:0:0:0: [sdc] Write Protect is off [ 3.836673] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 3.836709] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.903068] sdc: sdc1 sdc2 < sdc5 sdc6 > [ 3.903554] sd 4:0:0:0: [sdc] Attached SCSI disk [ 4.557257] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4.563337] ata6.00: ATA-8: SAMSUNG HD203WI, 1AN10002, max UDMA/133 [ 4.563404] ata6.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 4.569560] ata6.00: configured for UDMA/133 [ 4.569830] scsi 5:0:0:0: Direct-Access ATA SAMSUNG HD203WI 1AN1 PQ: 0 ANSI: 5 [ 4.570045] sd 5:0:0:0: Attached scsi generic sg3 type 0 [ 4.570101] sd 5:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 4.570188] sd 5:0:0:0: [sdd] Write Protect is off [ 4.570253] sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 4.570314] sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.585087] sdd: sdd1 [ 4.585588] sd 5:0:0:0: [sdd] Attached SCSI disk [ 5.293116] ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 5.301275] ata7.00: ATAPI: HL-DT-ST BD-RE BH10LS30, 1.00, max UDMA/133 [ 5.305226] ata7.00: configured for UDMA/133 [ 5.323438] scsi 6:0:0:0: CD-ROM HL-DT-ST BD-RE BH10LS30 1.00 PQ: 0 ANSI: 5 [ 5.338257] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray [ 5.338340] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 5.338478] sr 6:0:0:0: Attached scsi CD-ROM sr0 [ 5.338527] sr 6:0:0:0: Attached scsi generic sg4 type 5 [ 6.061070] ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 6.061406] ata8.00: ATAPI: ATAPI DVD A DH16AASH, SA15, max UDMA/100 [ 6.062207] ata8.00: configured for UDMA/100 [ 6.063826] scsi 7:0:0:0: CD-ROM ATAPI DVD A DH16AASH SA15 PQ: 0 ANSI: 5 [ 6.070237] sr1: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray [ 6.070441] sr 7:0:0:0: Attached scsi CD-ROM sr1 [ 6.070488] sr 7:0:0:0: Attached scsi generic sg5 type 5 [ 6.080938] Initializing USB Mass Storage driver... [ 6.088585] nouveau 0000:03:00.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24 [ 6.088654] nouveau 0000:03:00.0: setting latency timer to 64 [ 6.090073] [drm] nouveau 0000:03:00.0: Detected an NV50 generation card (0x0a0180b1) [ 6.092115] [drm] nouveau 0000:03:00.0: Attempting to load BIOS image from PRAMIN [ 6.160935] [drm] nouveau 0000:03:00.0: ... appears to be valid [ 6.160997] [drm] nouveau 0000:03:00.0: BIT BIOS found [ 6.161055] [drm] nouveau 0000:03:00.0: Bios version 62.00.58.00 [ 6.161115] [drm] nouveau 0000:03:00.0: TMDS table version 2.0 [ 6.161174] [drm] nouveau 0000:03:00.0: Found Display Configuration Block version 4.0 [ 6.161250] [drm] nouveau 0000:03:00.0: Raw DCB entry 0: 04000320 00000028 [ 6.161311] [drm] nouveau 0000:03:00.0: Raw DCB entry 1: 01000322 00020030 [ 6.161372] [drm] nouveau 0000:03:00.0: Raw DCB entry 2: 02011310 00000028 [ 6.161432] [drm] nouveau 0000:03:00.0: Raw DCB entry 3: 02011312 00020030 [ 6.161493] [drm] nouveau 0000:03:00.0: DCB connector table: VHER 0x40 5 16 4 [ 6.161555] [drm] nouveau 0000:03:00.0: 0: 0x00001030: type 0x30 idx 0 tag 0x07 [ 6.161631] [drm] nouveau 0000:03:00.0: 1: 0x00002130: type 0x30 idx 1 tag 0x08 [ 6.161706] [drm] nouveau 0000:03:00.0: 5: 0x00000360: type 0x60 idx 5 tag 0xff [ 6.161783] [drm] nouveau 0000:03:00.0: Parsing VBIOS init table 0 at offset 0xD0F3 [ 6.205231] [drm] nouveau 0000:03:00.0: Parsing VBIOS init table 1 at offset 0xD51E [ 6.221012] [drm] nouveau 0000:03:00.0: Parsing VBIOS init table 2 at offset 0xE9BB [ 6.221099] [drm] nouveau 0000:03:00.0: Parsing VBIOS init table 3 at offset 0xEA98 [ 6.229087] [drm] nouveau 0000:03:00.0: Parsing VBIOS init table 4 at offset 0xEB6A [ 6.229164] [drm] nouveau 0000:03:00.0: Parsing VBIOS init table at offset 0xEBCF [ 6.253042] [drm] nouveau 0000:03:00.0: 0xEBCF: Condition still not met after 20ms, skipping following opcodes [ 6.273451] [drm] nouveau 0000:03:00.0: 3 available performance level(s) [ 6.273514] [drm] nouveau 0000:03:00.0: 0: memory 100MHz core 300MHz shader 600MHz voltage 1050mV fanspeed 100% [ 6.273594] [drm] nouveau 0000:03:00.0: 2: memory 300MHz core 400MHz shader 800MHz voltage 1050mV fanspeed 100% [ 6.273675] [drm] nouveau 0000:03:00.0: 3: memory 1242MHz core 648MHz shader 1476MHz voltage 1150mV fanspeed 100% [ 6.273767] [drm] nouveau 0000:03:00.0: c: memory 297MHz core 399MHz shader 810MHz voltage 1050mV [ 6.274091] [TTM] Zone kernel: Available graphics memory: 429530 kiB. [ 6.274158] [TTM] Zone highmem: Available graphics memory: 1543422 kiB. [ 6.274222] [TTM] Initializing pool allocator. [ 6.274292] [drm] nouveau 0000:03:00.0: Detected 1024MiB VRAM [ 6.274359] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining [ 6.316364] [drm] nouveau 0000:03:00.0: 512 MiB GART (aperture) [ 6.394048] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 6.394116] [drm] No driver support for vblank timestamp query. [ 6.570410] [drm] nouveau 0000:03:00.0: allocated 1600x1200 fb: 0x60000000, bo f6171800 [ 6.573967] Console: switching to colour frame buffer device 200x75 [ 6.576382] fb0: nouveaufb frame buffer device [ 6.576393] drm: registered panic notifier [ 6.576406] [drm] Initialized nouveau 0.0.16 20090420 for 0000:03:00.0 on minor 0 [ 6.584555] xor: automatically using best checksumming function: pIII_sse [ 6.600873] pIII_sse : 9720.000 MB/sec [ 6.600881] xor: using function: pIII_sse (9720.000 MB/sec) [ 6.603687] device-mapper: dm-raid45: initialized v0.2594b [ 12.720208] generic-usb 0003:0BDA:0152.0001: timeout initializing reports [ 12.720336] generic-usb 0003:0BDA:0152.0001: hiddev0,hidraw0: USB HID v1.11 Device [Generic USB2.0-CRW] on usb-0000:00:1a.7-3/input1 [ 12.720934] scsi10 : usb-storage 1-3:1.0 [ 12.721162] usbcore: registered new interface driver usb-storage [ 12.721174] USB Mass Storage support registered. [ 12.750101] input: Device Media Center Interface as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0/input/input2 [ 12.750234] generic-usb 0003:04EB:E030.0002: input,hiddev0,hidraw1: USB HID v1.10 Keyboard [Device Media Center Interface] on usb-0000:00:1a.1-2/input0 [ 12.764135] generic-usb 0003:04EB:E030.0003: hiddev0,hidraw2: USB HID v1.10 Device [Device Media Center Interface] on usb-0000:00:1a.1-2/input1 [ 12.764210] usbcore: registered new interface driver usbhid [ 12.764217] usbhid: USB HID core driver [ 12.816276] input: MLK MTS2118 Wireless Desktop as /devices/pci0000:00/0000:00:1d.7/usb2/2-3/2-3.3/2-3.3:1.0/input/input3 [ 12.816437] sunplus 0003:04FC:05D8.0004: input,hidraw3: USB HID v1.00 Keyboard [MLK MTS2118 Wireless Desktop] on usb-0000:00:1d.7-3.3/input0 [ 12.821297] sunplus 0003:04FC:05D8.0005: fixing up Sunplus Wireless Desktop report descriptor [ 12.821721] input: MLK MTS2118 Wireless Desktop as /devices/pci0000:00/0000:00:1d.7/usb2/2-3/2-3.3/2-3.3:1.1/input/input4 [ 12.821876] sunplus 0003:04FC:05D8.0005: input,hiddev0,hidraw4: USB HID v1.00 Mouse [MLK MTS2118 Wireless Desktop] on usb-0000:00:1d.7-3.3/input1 [ 13.722672] scsi 10:0:0:0: Direct-Access Generic- Compact Flash 1.00 PQ: 0 ANSI: 0 CCS [ 13.725307] scsi 10:0:0:1: Direct-Access Generic- SM/xD-Picture 1.00 PQ: 0 ANSI: 0 CCS [ 13.727945] scsi 10:0:0:2: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS [ 13.730397] scsi 10:0:0:3: Direct-Access Generic- MS/MS-Pro 1.00 PQ: 0 ANSI: 0 CCS [ 13.731606] sd 10:0:0:0: Attached scsi generic sg6 type 0 [ 13.731715] sd 10:0:0:1: Attached scsi generic sg7 type 0 [ 13.731856] sd 10:0:0:2: Attached scsi generic sg8 type 0 [ 13.732057] sd 10:0:0:3: Attached scsi generic sg9 type 0 [ 13.744660] sd 10:0:0:0: [sde] Attached SCSI removable disk [ 13.746410] sd 10:0:0:1: [sdf] Attached SCSI removable disk [ 13.748180] sd 10:0:0:2: [sdg] Attached SCSI removable disk [ 13.749909] sd 10:0:0:3: [sdh] Attached SCSI removable disk [ 18.136370] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null) [ 26.780468] <30>udev[466]: starting version 167 [ 26.790232] lp: driver loaded but no devices found [ 26.817592] EDAC MC: Ver: 2.1.0 Apr 11 2011 [ 26.822624] EDAC i7core: Driver loaded. [ 26.882363] IR NEC protocol handler initialized [ 26.889184] IR RC5(x) protocol handler initialized [ 26.891394] IR RC6 protocol handler initialized [ 26.894604] IR JVC protocol handler initialized [ 26.897024] IR Sony protocol handler initialized [ 26.903079] lirc_dev: IR Remote Control driver registered, major 249 [ 26.905775] IR LIRC bridge handler initialized [ 26.908961] dvb-usb: found a 'TerraTec/qanu USB2.0 Highspeed DVB-T Receiver' in warm state. [ 26.912739] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 26.913136] DVB: registering new adapter (TerraTec/qanu USB2.0 Highspeed DVB-T Receiver) [ 26.913916] DVB: registering adapter 0 frontend 0 (TerraTec/qanu USB2.0 Highspeed DVB-T Receiver)... [ 26.914237] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb2/2-3/2-3.2/input/input5 [ 26.914284] dvb-usb: schedule remote query interval to 50 msecs. [ 26.915038] dvb-usb: TerraTec/qanu USB2.0 Highspeed DVB-T Receiver successfully initialized and connected. [ 26.915060] usbcore: registered new interface driver cinergyT2 [ 26.916570] type=1400 audit(1303243653.853:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=816 comm="apparmor_parser" [ 26.916691] type=1400 audit(1303243653.853:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=651 comm="apparmor_parser" [ 26.917196] type=1400 audit(1303243653.853:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=816 comm="apparmor_parser" [ 26.917320] type=1400 audit(1303243653.853:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=651 comm="apparmor_parser" [ 26.917600] type=1400 audit(1303243653.853:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=816 comm="apparmor_parser" [ 26.917738] type=1400 audit(1303243653.857:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=651 comm="apparmor_parser" [ 26.918102] EXT4-fs (sdb5): re-mounted. Opts: errors=remount-ro [ 26.948780] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 26.948827] HDA Intel 0000:00:1b.0: irq 66 for MSI/MSI-X [ 26.948861] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 26.993098] hda_codec: ALC1200: BIOS auto-probing. [ 26.999629] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 [ 27.336173] type=1400 audit(1303243654.273:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1016 comm="apparmor_parser" [ 27.336829] type=1400 audit(1303243654.273:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1016 comm="apparmor_parser" [ 27.337252] type=1400 audit(1303243654.273:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1016 comm="apparmor_parser" [ 27.341182] type=1400 audit(1303243654.277:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=1017 comm="apparmor_parser" [ 27.473880] e1000e 0000:00:19.0: irq 64 for MSI/MSI-X [ 27.529721] e1000e 0000:00:19.0: irq 64 for MSI/MSI-X [ 27.529912] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 28.316505] ppdev: user-space parallel port driver [ 28.610842] Intel AES-NI instructions are not detected. [ 28.638632] padlock_aes: VIA PadLock not detected. [ 28.675958] padlock_sha: VIA PadLock Hash Engine not detected. [ 29.935374] Adding 6281212k swap on /dev/mapper/cryptswap1. Priority:-1 extents:1 across:6281212k [ 30.529871] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 30.530018] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 31.541896] EXT4-fs (sdb5): re-mounted. Opts: errors=remount-ro,commit=0 [ 40.923574] eth0: no IPv6 routers present