[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-24-generic (buildd@yellow) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #41-Ubuntu SMP Thu Aug 19 01:38:40 UTC 2010 (Ubuntu 2.6.32-24.41-generic 2.6.32.15+drm33.5) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=UUID=c03902c4-80ca-498f-8855-df7837407dd7 ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e2000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cff90000 (usable) [ 0.000000] BIOS-e820: 00000000cff90000 - 00000000cff9e000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cff9e000 - 00000000cffe0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cffe0000 - 00000000e0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] DMI present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xcff90 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DFFFF uncachable [ 0.000000] E0000-EFFFF write-through [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0E0000000 mask 0E0000000 uncachable [ 0.000000] 1 base 000000000 mask 000000000 write-back [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e2000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000cff90000 (usable) [ 0.000000] modified: 00000000cff90000 - 00000000cff9e000 (ACPI data) [ 0.000000] modified: 00000000cff9e000 - 00000000cffe0000 (ACPI NVS) [ 0.000000] modified: 00000000cffe0000 - 00000000e0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000cff90000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0000000000 - 00cfe00000 page 2M [ 0.000000] 00cfe00000 - 00cff90000 page 4k [ 0.000000] kernel direct mapping tables up to cff90000 @ 10000-16000 [ 0.000000] RAMDISK: 37285000 - 37fefb57 [ 0.000000] ACPI: RSDP 00000000000fbc60 00024 (v02 ACPIAM) [ 0.000000] ACPI: XSDT 00000000cff90100 00074 (v01 _ASUS_ Notebook 20100223 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000cff90290 000F4 (v03 022310 FACP1134 20100223 MSFT 00000097) [ 0.000000] ACPI: DSDT 00000000cff90500 0A5B3 (v01 A1469 A1469001 00000001 INTL 20051117) [ 0.000000] ACPI: FACS 00000000cff9e000 00040 [ 0.000000] ACPI: APIC 00000000cff90390 00080 (v01 022310 APIC1134 20100223 MSFT 00000097) [ 0.000000] ACPI: MCFG 00000000cff90410 0003C (v01 022310 OEMMCFG 20100223 MSFT 00000097) [ 0.000000] ACPI: WDRT 00000000cff90450 00047 (v01 022310 NV-WDRT 20100223 MSFT 00000097) [ 0.000000] ACPI: ECDT 00000000cff904a0 00055 (v01 022310 OEMECDT 20100223 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000cff9e040 00079 (v01 022310 OEMB1134 20100223 MSFT 00000097) [ 0.000000] ACPI: HPET 00000000cff9b500 00038 (v01 022310 OEMHPET0 20100223 MSFT 00000097) [ 0.000000] ACPI: NVHD 00000000cff9e0c0 00284 (v01 022310 NVHDCP 20100223 MSFT 00000097) [ 0.000000] ACPI: SSDT 00000000cff9e980 004F0 (v01 PmRef CpuPm 00003000 INTL 20051117) [ 0.000000] ACPI: SLIC 00000000cff9b540 00176 (v01 _ASUS_ Notebook 20100223 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-00000000cff90000 [ 0.000000] Bootmem setup node 0 0000000000000000-00000000cff90000 [ 0.000000] NODE_DATA [0000000000014000 - 0000000000018fff] [ 0.000000] bootmap [0000000000019000 - 0000000000032ff7] pages 1a [ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 00cff90000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 0001a2fe64] TEXT DATA BSS ==> [0001000000 - 0001a2fe64] [ 0.000000] #3 [0037285000 - 0037fefb57] RAMDISK ==> [0037285000 - 0037fefb57] [ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #5 [0001a30000 - 0001a30237] BRK ==> [0001a30000 - 0001a30237] [ 0.000000] #6 [0000010000 - 0000014000] PGTABLE ==> [0000010000 - 0000014000] [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780 [ 0.000000] [ffffea0000000000-ffffea0002dfffff] PMD -> [ffff880002000000-ffff880004dfffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000cff90 [ 0.000000] On node 0 totalpages: 851743 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 103 pages reserved [ 0.000000] DMA zone: 3824 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 11591 pages used for memmap [ 0.000000] DMA32 zone: 836169 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e2000 [ 0.000000] PM: Registered nosave memory: 00000000000e2000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:1ec00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880001c00000 s91544 r8192 d23144 u524288 [ 0.000000] pcpu-alloc: s91544 r8192 d23144 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 839993 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=UUID=c03902c4-80ca-498f-8855-df7837407dd7 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 3334992k/3407424k available (5422k kernel code, 452k absent, 71980k reserved, 2979k data, 880k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:440 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 34078720 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1599.987 MHz processor. [ 0.010015] Calibrating delay loop (skipped), value calculated using timer frequency.. 3199.97 BogoMIPS (lpj=15999870) [ 0.010084] Security Framework initialized [ 0.010136] AppArmor: AppArmor initialized [ 0.011297] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.015148] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.021316] Mount-cache hash table entries: 256 [ 0.021683] Initializing cgroup subsys ns [ 0.021696] Initializing cgroup subsys cpuacct [ 0.021707] Initializing cgroup subsys memory [ 0.021727] Initializing cgroup subsys devices [ 0.021735] Initializing cgroup subsys freezer [ 0.021741] Initializing cgroup subsys net_cls [ 0.021792] CPU: L1 I cache: 32K, L1 D cache: 24K [ 0.021800] CPU: L2 cache: 512K [ 0.021808] CPU 0/0x0 -> Node 0 [ 0.021813] CPU: Physical Processor ID: 0 [ 0.021818] CPU: Processor Core ID: 0 [ 0.021826] mce: CPU supports 5 MCE banks [ 0.021843] CPU0: Thermal monitoring enabled (TM1) [ 0.021853] using mwait in idle threads. [ 0.021859] Performance Events: Atom events, Intel PMU driver. [ 0.021874] ... version: 3 [ 0.021879] ... bit width: 40 [ 0.021883] ... generic registers: 2 [ 0.021888] ... value mask: 000000ffffffffff [ 0.021894] ... max period: 000000007fffffff [ 0.021899] ... fixed-purpose events: 3 [ 0.021904] ... event mask: 0000000700000003 [ 0.025481] ACPI: Core revision 20090903 [ 0.060024] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.060039] ftrace: allocating 22527 entries in 89 pages [ 0.070151] Setting APIC routing to flat [ 0.070580] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.174334] CPU0: Intel(R) Atom(TM) CPU 330 @ 1.60GHz stepping 02 [ 0.180000] Booting processor 1 APIC 0x2 ip 0x6000 [ 0.020000] Initializing CPU#1 [ 0.020000] CPU: L1 I cache: 32K, L1 D cache: 24K [ 0.020000] CPU: L2 cache: 512K [ 0.020000] CPU 1/0x2 -> Node 0 [ 0.020000] CPU: Physical Processor ID: 0 [ 0.020000] CPU: Processor Core ID: 1 [ 0.020000] CPU1: Thermal monitoring enabled (TM1) [ 0.330067] CPU1: Intel(R) Atom(TM) CPU 330 @ 1.60GHz stepping 02 [ 0.330088] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.340251] Booting processor 2 APIC 0x1 ip 0x6000 [ 0.020000] Initializing CPU#2 [ 0.020000] CPU: L1 I cache: 32K, L1 D cache: 24K [ 0.020000] CPU: L2 cache: 512K [ 0.020000] CPU 2/0x1 -> Node 0 [ 0.020000] CPU: Physical Processor ID: 0 [ 0.020000] CPU: Processor Core ID: 0 [ 0.020000] CPU2: Thermal monitoring enabled (TM1) [ 0.500120] CPU2: Intel(R) Atom(TM) CPU 330 @ 1.60GHz stepping 02 [ 0.500141] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 0.510300] Booting processor 3 APIC 0x3 ip 0x6000 [ 0.020000] Initializing CPU#3 [ 0.020000] CPU: L1 I cache: 32K, L1 D cache: 24K [ 0.020000] CPU: L2 cache: 512K [ 0.020000] CPU 3/0x3 -> Node 0 [ 0.020000] CPU: Physical Processor ID: 0 [ 0.020000] CPU: Processor Core ID: 1 [ 0.020000] CPU3: Thermal monitoring enabled (TM1) [ 0.670056] CPU3: Intel(R) Atom(TM) CPU 330 @ 1.60GHz stepping 02 [ 0.670076] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 0.680032] Brought up 4 CPUs [ 0.680040] Total of 4 processors activated (12800.18 BogoMIPS). [ 0.681641] CPU0 attaching sched-domain: [ 0.681652] domain 0: span 0,2 level SIBLING [ 0.681658] groups: 0 (cpu_power = 589) 2 (cpu_power = 589) [ 0.681672] domain 1: span 0,2 level MC [ 0.681677] groups: 0,2 (cpu_power = 1178) [ 0.681687] domain 2: span 0-3 level CPU [ 0.681693] groups: 0,2 (cpu_power = 1178) 1,3 (cpu_power = 1178) [ 0.681712] CPU1 attaching sched-domain: [ 0.681717] domain 0: span 1,3 level SIBLING [ 0.681722] groups: 1 (cpu_power = 589) 3 (cpu_power = 589) [ 0.681735] domain 1: span 1,3 level MC [ 0.681740] groups: 1,3 (cpu_power = 1178) [ 0.681750] domain 2: span 0-3 level CPU [ 0.681755] groups: 1,3 (cpu_power = 1178) 0,2 (cpu_power = 1178) [ 0.681770] CPU2 attaching sched-domain: [ 0.681775] domain 0: span 0,2 level SIBLING [ 0.681781] groups: 2 (cpu_power = 589) 0 (cpu_power = 589) [ 0.681793] domain 1: span 0,2 level MC [ 0.681799] groups: 0,2 (cpu_power = 1178) [ 0.681808] domain 2: span 0-3 level CPU [ 0.681813] groups: 0,2 (cpu_power = 1178) 1,3 (cpu_power = 1178) [ 0.681828] CPU3 attaching sched-domain: [ 0.681833] domain 0: span 1,3 level SIBLING [ 0.681839] groups: 3 (cpu_power = 589) 1 (cpu_power = 589) [ 0.681851] domain 1: span 1,3 level MC [ 0.681856] groups: 1,3 (cpu_power = 1178) [ 0.681866] domain 2: span 0-3 level CPU [ 0.681871] groups: 1,3 (cpu_power = 1178) 0,2 (cpu_power = 1178) [ 0.682325] devtmpfs: initialized [ 0.682325] regulator: core version 0.5 [ 0.682325] Time: 19:26:00 Date: 08/25/10 [ 0.682325] NET: Registered protocol family 16 [ 0.682325] Trying to unpack rootfs image as initramfs... [ 0.682325] ACPI: bus type pci registered [ 0.682325] PCI: MCFG configuration 0: base fc000000 segment 0 buses 0 - 31 [ 0.682325] PCI: Not using MMCONFIG. [ 0.682325] PCI: Using configuration type 1 for base access [ 0.682830] bio: create slab at 0 [ 0.690725] ACPI: EC: EC description table is found, configuring boot EC [ 0.694401] ACPI: BIOS _OSI(Linux) query ignored [ 0.694588] ACPI Error (dswload-0659): [USB0] Namespace lookup failure, AE_NOT_FOUND [ 0.694602] ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20090903/psloop-230) [ 0.694614] ACPI Error (psparse-0537): Method parse/execution failed [\] (Node ffffffff81a0e440), AE_NOT_FOUND [ 0.694770] ACPI: Executed 2 blocks of module-level executable AML code [ 0.725820] ACPI: Interpreter enabled [ 0.725842] ACPI: (supports S0 S3 S4 S5) [ 0.725907] ACPI: Using IOAPIC for interrupt routing [ 0.726084] PCI: MCFG configuration 0: base fc000000 segment 0 buses 0 - 31 [ 0.742697] PCI: MCFG area at fc000000 reserved in ACPI motherboard resources [ 0.744137] PCI: Using MMCONFIG at fc000000 - fdffffff [ 0.787315] ACPI: EC: GPE = 0x27, I/O: command/status = 0x66, data = 0x62 [ 0.788277] ACPI: No dock devices found. [ 0.789341] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.789698] pci 0000:00:03.0: reg 10 io port: [0x4f00-0x4fff] [ 0.789841] pci 0000:00:03.2: reg 10 io port: [0x4900-0x493f] [ 0.789864] pci 0000:00:03.2: reg 20 io port: [0x4d00-0x4d3f] [ 0.789874] pci 0000:00:03.2: reg 24 io port: [0x4e00-0x4e3f] [ 0.789911] pci 0000:00:03.2: PME# supported from D3hot D3cold [ 0.789922] pci 0000:00:03.2: PME# disabled [ 0.790106] pci 0000:00:03.5: reg 10 32bit mmio: [0xf9f80000-0xf9ffffff] [ 0.790233] pci 0000:00:04.0: reg 10 32bit mmio: [0xf9f7f000-0xf9f7ffff] [ 0.790279] pci 0000:00:04.0: supports D1 D2 [ 0.790284] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.790292] pci 0000:00:04.0: PME# disabled [ 0.790350] pci 0000:00:04.1: reg 10 32bit mmio: [0xf9f7ec00-0xf9f7ecff] [ 0.790403] pci 0000:00:04.1: supports D1 D2 [ 0.790408] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.790416] pci 0000:00:04.1: PME# disabled [ 0.790468] pci 0000:00:06.0: reg 10 32bit mmio: [0xf9f7d000-0xf9f7dfff] [ 0.790518] pci 0000:00:06.0: supports D1 D2 [ 0.790524] pci 0000:00:06.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.790532] pci 0000:00:06.0: PME# disabled [ 0.790580] pci 0000:00:06.1: reg 10 32bit mmio: [0xf9f7e800-0xf9f7e8ff] [ 0.790633] pci 0000:00:06.1: supports D1 D2 [ 0.790638] pci 0000:00:06.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.790646] pci 0000:00:06.1: PME# disabled [ 0.790699] pci 0000:00:08.0: reg 10 32bit mmio: [0xf9f78000-0xf9f7bfff] [ 0.790744] pci 0000:00:08.0: PME# supported from D3hot D3cold [ 0.790752] pci 0000:00:08.0: PME# disabled [ 0.790852] pci 0000:00:0b.0: reg 10 io port: [0xb080-0xb087] [ 0.790862] pci 0000:00:0b.0: reg 14 io port: [0xb000-0xb003] [ 0.790872] pci 0000:00:0b.0: reg 18 io port: [0xac00-0xac07] [ 0.790881] pci 0000:00:0b.0: reg 1c io port: [0xa880-0xa883] [ 0.790891] pci 0000:00:0b.0: reg 20 io port: [0xa800-0xa80f] [ 0.790901] pci 0000:00:0b.0: reg 24 32bit mmio: [0xf9f76000-0xf9f77fff] [ 0.791019] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.791027] pci 0000:00:10.0: PME# disabled [ 0.791299] pci 0000:00:16.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.791311] pci 0000:00:16.0: PME# disabled [ 0.791609] pci 0000:00:18.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.791621] pci 0000:00:18.0: PME# disabled [ 0.791737] pci 0000:00:09.0: transparent bridge [ 0.791794] pci 0000:05:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff] [ 0.791810] pci 0000:05:00.0: reg 14 64bit mmio pref: [0xe0000000-0xefffffff] [ 0.791826] pci 0000:05:00.0: reg 1c 64bit mmio pref: [0xf6000000-0xf7ffffff] [ 0.791838] pci 0000:05:00.0: reg 24 io port: [0xcc00-0xcc7f] [ 0.791849] pci 0000:05:00.0: reg 30 32bit mmio pref: [0xfbde0000-0xfbdfffff] [ 0.791928] pci 0000:00:10.0: bridge io port: [0xc000-0xcfff] [ 0.791936] pci 0000:00:10.0: bridge 32bit mmio: [0xfa000000-0xfbdfffff] [ 0.791945] pci 0000:00:10.0: bridge 64bit mmio pref: [0xe0000000-0xf7ffffff] [ 0.792010] pci 0000:07:00.0: reg 10 io port: [0xd800-0xd8ff] [ 0.792023] pci 0000:07:00.0: reg 14 32bit mmio: [0xfbefc000-0xfbefffff] [ 0.792092] pci 0000:07:00.0: supports D1 D2 [ 0.792097] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot [ 0.792105] pci 0000:07:00.0: PME# disabled [ 0.792191] pci 0000:00:16.0: bridge io port: [0xd000-0xdfff] [ 0.792203] pci 0000:00:16.0: bridge 32bit mmio: [0xfbe00000-0xfbefffff] [ 0.792293] pci 0000:09:00.0: reg 10 64bit mmio: [0xfbfc0000-0xfbffffff] [ 0.792306] pci 0000:09:00.0: reg 18 io port: [0xec00-0xec7f] [ 0.792374] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.792383] pci 0000:09:00.0: PME# disabled [ 0.792467] pci 0000:00:18.0: bridge io port: [0xe000-0xefff] [ 0.792480] pci 0000:00:18.0: bridge 32bit mmio: [0xfbf00000-0xfbffffff] [ 0.792550] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.793103] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IXVE._PRT] [ 0.793342] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT] [ 0.793528] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT] [ 0.839563] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled. [ 0.840358] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled. [ 0.841114] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled. [ 0.841887] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled. [ 0.842642] ACPI: PCI Interrupt Link [LN0A] (IRQs 16 17 18 19) *0, disabled. [ 0.843396] ACPI: PCI Interrupt Link [LN0B] (IRQs 16 17 18 19) *0, disabled. [ 0.844149] ACPI: PCI Interrupt Link [LN0C] (IRQs 16 17 18 19) *0, disabled. [ 0.844901] ACPI: PCI Interrupt Link [LN0D] (IRQs 16 17 18 19) *0, disabled. [ 0.845653] ACPI: PCI Interrupt Link [LN1A] (IRQs 16 17 18 19) *0, disabled. [ 0.846411] ACPI: PCI Interrupt Link [LN1B] (IRQs 16 17 18 19) *0, disabled. [ 0.847163] ACPI: PCI Interrupt Link [LN1C] (IRQs 16 17 18 19) *0, disabled. [ 0.847916] ACPI: PCI Interrupt Link [LN1D] (IRQs 16 17 18 19) *0, disabled. [ 0.848668] ACPI: PCI Interrupt Link [LN2A] (IRQs 16 17 18 19) *0, disabled. [ 0.849422] ACPI: PCI Interrupt Link [LN2B] (IRQs 16 17 18 19) *0, disabled. [ 0.850206] ACPI: PCI Interrupt Link [LN2C] (IRQs 16 17 18 19) *0, disabled. [ 0.850963] ACPI: PCI Interrupt Link [LN2D] (IRQs 16 17 18 19) *0, disabled. [ 0.851716] ACPI: PCI Interrupt Link [LN3A] (IRQs 16 17 18 19) *0, disabled. [ 0.852482] ACPI: PCI Interrupt Link [LN3B] (IRQs 16 17 18 19) *0, disabled. [ 0.853235] ACPI: PCI Interrupt Link [LN3C] (IRQs 16 17 18 19) *0, disabled. [ 0.854000] ACPI: PCI Interrupt Link [LN3D] (IRQs 16 17 18 19) *0, disabled. [ 0.854766] ACPI: PCI Interrupt Link [LN4A] (IRQs 16 17 18 19) *11 [ 0.855519] ACPI: PCI Interrupt Link [LN4B] (IRQs 16 17 18 19) *0, disabled. [ 0.856273] ACPI: PCI Interrupt Link [LN4C] (IRQs 16 17 18 19) *0, disabled. [ 0.857028] ACPI: PCI Interrupt Link [LN4D] (IRQs 16 17 18 19) *0, disabled. [ 0.857789] ACPI: PCI Interrupt Link [LN5A] (IRQs 16 17 18 19) *0, disabled. [ 0.858553] ACPI: PCI Interrupt Link [LN5B] (IRQs 16 17 18 19) *0, disabled. [ 0.859321] ACPI: PCI Interrupt Link [LN5C] (IRQs 16 17 18 19) *0, disabled. [ 0.860104] ACPI: PCI Interrupt Link [LN5D] (IRQs 16 17 18 19) *0, disabled. [ 0.860899] ACPI: PCI Interrupt Link [LN6A] (IRQs 16 17 18 19) *9 [ 0.861654] ACPI: PCI Interrupt Link [LN6B] (IRQs 16 17 18 19) *0, disabled. [ 0.862408] ACPI: PCI Interrupt Link [LN6C] (IRQs 16 17 18 19) *0, disabled. [ 0.863161] ACPI: PCI Interrupt Link [LN6D] (IRQs 16 17 18 19) *0, disabled. [ 0.863927] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *10 [ 0.864694] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *11 [ 0.865448] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0, disabled. [ 0.866215] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *10 [ 0.866978] ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *11 [ 0.867741] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *9 [ 0.868504] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *15 [ 0.869269] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5 [ 0.870166] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled. [ 0.870943] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *9 [ 0.871711] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *15 [ 0.872479] ACPI: PCI Interrupt Link [LRP0] (IRQs 20 21 22 23) *10 [ 0.873243] ACPI: PCI Interrupt Link [LRP1] (IRQs 20 21 22 23) *11 [ 0.874018] ACPI: PCI Interrupt Link [LRP2] (IRQs 20 21 22 23) *9 [ 0.874786] ACPI: PCI Interrupt Link [LRP3] (IRQs 20 21 22 23) *15 [ 0.875559] ACPI: PCI Interrupt Link [LRP4] (IRQs 20 21 22 23) *14 [ 0.876338] ACPI: PCI Interrupt Link [LRP5] (IRQs 20 21 22 23) *7 [ 0.877118] ACPI: PCI Interrupt Link [LRP6] (IRQs 20 21 22 23) *10 [ 0.877491] vgaarb: device added: PCI:0000:05:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.877502] vgaarb: loaded [ 0.877800] SCSI subsystem initialized [ 0.877909] libata version 3.00 loaded. [ 0.877909] usbcore: registered new interface driver usbfs [ 0.877909] usbcore: registered new interface driver hub [ 0.877909] usbcore: registered new device driver usb [ 0.877909] ACPI: WMI: Mapper loaded [ 0.877909] PCI: Using ACPI for IRQ routing [ 0.877909] NetLabel: Initializing [ 0.877909] NetLabel: domain hash size = 128 [ 0.877909] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.877909] NetLabel: unlabeled traffic allowed by default [ 0.877909] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31, 31 [ 0.877909] hpet0: 4 comparators, 64-bit 25.000000 MHz counter [ 0.910281] Switching to clocksource tsc [ 0.915116] AppArmor: AppArmor Filesystem Enabled [ 0.915163] pnp: PnP ACPI init [ 0.915206] ACPI: bus type pnp registered [ 0.931974] pnp: PnP ACPI: found 12 devices [ 0.931982] ACPI: ACPI bus type pnp unregistered [ 0.932023] system 00:06: ioport range 0x4d0-0x4d1 has been reserved [ 0.932031] system 00:06: ioport range 0x800-0x80f has been reserved [ 0.932039] system 00:06: ioport range 0x4000-0x407f has been reserved [ 0.932047] system 00:06: ioport range 0x4080-0x40ff has been reserved [ 0.932054] system 00:06: ioport range 0x4400-0x447f has been reserved [ 0.932062] system 00:06: ioport range 0x4480-0x44ff has been reserved [ 0.932069] system 00:06: ioport range 0x4800-0x487f has been reserved [ 0.932077] system 00:06: ioport range 0x4880-0x48ff has been reserved [ 0.932084] system 00:06: ioport range 0x380-0x383 has been reserved [ 0.932094] system 00:06: iomem range 0xfefe2000-0xfefe3fff has been reserved [ 0.932102] system 00:06: iomem range 0xfefe1000-0xfefe1fff has been reserved [ 0.932110] system 00:06: iomem range 0xfee01000-0xfeefffff has been reserved [ 0.932130] system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.932138] system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.932155] system 00:0a: iomem range 0xfc000000-0xfdffffff has been reserved [ 0.932171] system 00:0b: iomem range 0x0-0x9ffff could not be reserved [ 0.932179] system 00:0b: iomem range 0xc0000-0xcffff has been reserved [ 0.932186] system 00:0b: iomem range 0xe0000-0xfffff could not be reserved [ 0.932194] system 00:0b: iomem range 0x100000-0xdfffffff could not be reserved [ 0.932202] system 00:0b: iomem range 0xfec00000-0xffffffff could not be reserved [ 0.937395] pci 0000:00:09.0: PCI bridge, secondary bus 0000:01 [ 0.937401] pci 0000:00:09.0: IO window: disabled [ 0.937409] pci 0000:00:09.0: MEM window: disabled [ 0.937416] pci 0000:00:09.0: PREFETCH window: disabled [ 0.937426] pci 0000:00:10.0: PCI bridge, secondary bus 0000:05 [ 0.937433] pci 0000:00:10.0: IO window: 0xc000-0xcfff [ 0.937441] pci 0000:00:10.0: MEM window: 0xfa000000-0xfbdfffff [ 0.937450] pci 0000:00:10.0: PREFETCH window: 0x000000e0000000-0x000000f7ffffff [ 0.937461] pci 0000:00:16.0: PCI bridge, secondary bus 0000:07 [ 0.937470] pci 0000:00:16.0: IO window: 0xd000-0xdfff [ 0.937485] pci 0000:00:16.0: MEM window: 0xfbe00000-0xfbefffff [ 0.937496] pci 0000:00:16.0: PREFETCH window: disabled [ 0.937515] pci 0000:00:18.0: PCI bridge, secondary bus 0000:09 [ 0.937524] pci 0000:00:18.0: IO window: 0xe000-0xefff [ 0.937539] pci 0000:00:18.0: MEM window: 0xfbf00000-0xfbffffff [ 0.937550] pci 0000:00:18.0: PREFETCH window: disabled [ 0.937580] pci 0000:00:09.0: setting latency timer to 64 [ 0.937594] pci 0000:00:10.0: setting latency timer to 64 [ 0.938691] ACPI: PCI Interrupt Link [LRP4] enabled at IRQ 23 [ 0.938704] alloc irq_desc for 23 on node -1 [ 0.938709] alloc kstat_irqs on node -1 [ 0.938725] pci 0000:00:16.0: PCI INT A -> Link[LRP4] -> GSI 23 (level, low) -> IRQ 23 [ 0.938740] pci 0000:00:16.0: setting latency timer to 64 [ 0.939837] ACPI: PCI Interrupt Link [LRP6] enabled at IRQ 22 [ 0.939846] alloc irq_desc for 22 on node -1 [ 0.939851] alloc kstat_irqs on node -1 [ 0.939862] pci 0000:00:18.0: PCI INT A -> Link[LRP6] -> GSI 22 (level, low) -> IRQ 22 [ 0.939876] pci 0000:00:18.0: setting latency timer to 64 [ 0.939889] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.939896] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.939904] pci_bus 0000:01: resource 3 io: [0x00-0xffff] [ 0.939911] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.939918] pci_bus 0000:05: resource 0 io: [0xc000-0xcfff] [ 0.939925] pci_bus 0000:05: resource 1 mem: [0xfa000000-0xfbdfffff] [ 0.939931] pci_bus 0000:05: resource 2 pref mem [0xe0000000-0xf7ffffff] [ 0.939939] pci_bus 0000:07: resource 0 io: [0xd000-0xdfff] [ 0.939945] pci_bus 0000:07: resource 1 mem: [0xfbe00000-0xfbefffff] [ 0.939952] pci_bus 0000:09: resource 0 io: [0xe000-0xefff] [ 0.939958] pci_bus 0000:09: resource 1 mem: [0xfbf00000-0xfbffffff] [ 0.940060] NET: Registered protocol family 2 [ 0.940525] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.944217] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.951311] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.952131] TCP: Hash tables configured (established 524288 bind 65536) [ 0.952140] TCP reno registered [ 0.952437] NET: Registered protocol family 1 [ 0.952752] pci 0000:05:00.0: Boot video device [ 0.953579] Scanning for low memory corruption every 60 seconds [ 0.953940] audit: initializing netlink socket (disabled) [ 0.953968] type=2000 audit(1282764359.948:1): initialized [ 0.970912] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.974899] VFS: Disk quotas dquot_6.5.2 [ 0.975065] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.976884] fuse init (API version 7.13) [ 0.977146] msgmni has been set to 6513 [ 0.978000] alg: No test for stdrng (krng) [ 0.978222] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.978231] io scheduler noop registered [ 0.978235] io scheduler anticipatory registered [ 0.978240] io scheduler deadline registered [ 0.978340] io scheduler cfq registered (default) [ 0.978851] alloc irq_desc for 24 on node -1 [ 0.978857] alloc kstat_irqs on node -1 [ 0.978917] pcieport 0000:00:16.0: irq 24 for MSI/MSI-X [ 0.978944] pcieport 0000:00:16.0: setting latency timer to 64 [ 0.979382] alloc irq_desc for 25 on node -1 [ 0.979388] alloc kstat_irqs on node -1 [ 0.979413] pcieport 0000:00:18.0: irq 25 for MSI/MSI-X [ 0.979439] pcieport 0000:00:18.0: setting latency timer to 64 [ 0.979665] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.979730] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.980057] ACPI: AC Adapter [AC0] (on-line) [ 0.980312] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 0.985253] ACPI: Lid Switch [LID] [ 0.985383] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 0.985398] ACPI: Sleep Button [SLPB] [ 0.985528] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 [ 0.985536] ACPI: Power Button [PWRB] [ 0.985675] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 0.985682] ACPI: Power Button [PWRF] [ 0.987806] ACPI: SSDT 00000000cff9e3e0 00594 (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.990349] Monitor-Mwait will be used to enter C-1 state [ 0.990469] processor LNXCPU:00: registered as cooling_device0 [ 0.991369] ACPI: SSDT 00000000cff9e350 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117) [ 0.994499] processor LNXCPU:01: registered as cooling_device1 [ 0.995934] processor LNXCPU:02: registered as cooling_device2 [ 0.997336] processor LNXCPU:03: registered as cooling_device3 [ 1.025523] thermal LNXTHERM:01: registered as thermal_zone0 [ 1.025553] ACPI: Thermal Zone [TZ00] (42 C) [ 1.030553] Linux agpgart interface v0.103 [ 1.030643] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.034402] brd: module loaded [ 1.035753] loop: module loaded [ 1.036031] input: Macintosh mouse button emulation as /devices/virtual/input/input4 [ 1.037602] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21 [ 1.037615] alloc irq_desc for 21 on node -1 [ 1.037620] alloc kstat_irqs on node -1 [ 1.037638] pata_acpi 0000:00:0b.0: PCI INT A -> Link[LSA0] -> GSI 21 (level, low) -> IRQ 21 [ 1.037702] pata_acpi 0000:00:0b.0: setting latency timer to 64 [ 1.037733] pata_acpi 0000:00:0b.0: PCI INT A disabled [ 1.038578] Fixed MDIO Bus: probed [ 1.038673] PPP generic driver version 2.4.2 [ 1.038832] tun: Universal TUN/TAP device driver, 1.6 [ 1.038838] tun: (C) 1999-2004 Max Krasnyansky [ 1.039089] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.040222] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 20 [ 1.040233] alloc irq_desc for 20 on node -1 [ 1.040238] alloc kstat_irqs on node -1 [ 1.040254] ehci_hcd 0000:00:04.1: PCI INT B -> Link[LUB2] -> GSI 20 (level, low) -> IRQ 20 [ 1.040293] ehci_hcd 0000:00:04.1: setting latency timer to 64 [ 1.040301] ehci_hcd 0000:00:04.1: EHCI Host Controller [ 1.040440] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 1 [ 1.040491] ehci_hcd 0000:00:04.1: debug port 1 [ 1.040506] ehci_hcd 0000:00:04.1: cache line size of 32 is not supported [ 1.040543] ehci_hcd 0000:00:04.1: irq 20, io mem 0xf9f7ec00 [ 1.053785] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00 [ 1.054037] usb usb1: configuration #1 chosen from 1 choice [ 1.054117] hub 1-0:1.0: USB hub found [ 1.054140] hub 1-0:1.0: 3 ports detected [ 1.055350] ACPI: PCI Interrupt Link [UB12] enabled at IRQ 23 [ 1.055363] ehci_hcd 0000:00:06.1: PCI INT B -> Link[UB12] -> GSI 23 (level, low) -> IRQ 23 [ 1.055402] ehci_hcd 0000:00:06.1: setting latency timer to 64 [ 1.055409] ehci_hcd 0000:00:06.1: EHCI Host Controller [ 1.055528] ehci_hcd 0000:00:06.1: new USB bus registered, assigned bus number 2 [ 1.055574] ehci_hcd 0000:00:06.1: debug port 1 [ 1.055588] ehci_hcd 0000:00:06.1: cache line size of 32 is not supported [ 1.055637] ehci_hcd 0000:00:06.1: irq 23, io mem 0xf9f7e800 [ 1.073780] ehci_hcd 0000:00:06.1: USB 2.0 started, EHCI 1.00 [ 1.074041] usb usb2: configuration #1 chosen from 1 choice [ 1.074120] hub 2-0:1.0: USB hub found [ 1.074142] hub 2-0:1.0: 6 ports detected [ 1.074297] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.075421] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 22 [ 1.075432] ohci_hcd 0000:00:04.0: PCI INT A -> Link[LUB0] -> GSI 22 (level, low) -> IRQ 22 [ 1.075471] ohci_hcd 0000:00:04.0: setting latency timer to 64 [ 1.075479] ohci_hcd 0000:00:04.0: OHCI Host Controller [ 1.075621] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 3 [ 1.075673] ohci_hcd 0000:00:04.0: irq 22, io mem 0xf9f7f000 [ 1.136024] usb usb3: configuration #1 chosen from 1 choice [ 1.136103] hub 3-0:1.0: USB hub found [ 1.136126] hub 3-0:1.0: 3 ports detected [ 1.137352] ACPI: PCI Interrupt Link [UB11] enabled at IRQ 21 [ 1.137365] ohci_hcd 0000:00:06.0: PCI INT A -> Link[UB11] -> GSI 21 (level, low) -> IRQ 21 [ 1.137411] ohci_hcd 0000:00:06.0: setting latency timer to 64 [ 1.137418] ohci_hcd 0000:00:06.0: OHCI Host Controller [ 1.137566] ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 4 [ 1.137622] ohci_hcd 0000:00:06.0: irq 21, io mem 0xf9f7d000 [ 1.178568] ACPI: Battery Slot [BAT0] (battery present) [ 1.196015] usb usb4: configuration #1 chosen from 1 choice [ 1.196105] hub 4-0:1.0: USB hub found [ 1.196128] hub 4-0:1.0: 6 ports detected [ 1.196262] uhci_hcd: USB Universal Host Controller Interface driver [ 1.196458] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 1.215243] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.215264] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.215556] mice: PS/2 mouse device common for all mice [ 1.215975] rtc_cmos 00:08: RTC can wake from S4 [ 1.216125] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0 [ 1.216199] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs [ 1.216608] device-mapper: uevent: version 1.0.3 [ 1.216957] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 1.217683] device-mapper: multipath: version 1.1.0 loaded [ 1.217691] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1.218416] cpuidle: using governor ladder [ 1.218423] cpuidle: using governor menu [ 1.219309] TCP cubic registered [ 1.219667] NET: Registered protocol family 10 [ 1.220872] lo: Disabled Privacy Extensions [ 1.221602] NET: Registered protocol family 17 [ 1.222033] PM: Resume from disk failed. [ 1.222065] registered taskstats version 1 [ 1.222767] Magic number: 6:282:446 [ 1.222971] rtc_cmos 00:08: setting system clock to 2010-08-25 19:26:00 UTC (1282764360) [ 1.222979] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.222983] EDD information not available. [ 1.233260] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 [ 1.360740] Freeing initrd memory: 13738k freed [ 1.373032] Freeing unused kernel memory: 880k freed [ 1.373592] Write protecting the kernel read-only data: 7696k [ 1.374132] usb 1-3: new high speed USB device using ehci_hcd and address 2 [ 1.423534] udev: starting version 151 [ 1.544813] usb 1-3: configuration #1 chosen from 1 choice [ 1.638778] ahci 0000:00:0b.0: version 3.0 [ 1.638813] ahci 0000:00:0b.0: PCI INT A -> Link[LSA0] -> GSI 21 (level, low) -> IRQ 21 [ 1.638890] alloc irq_desc for 26 on node -1 [ 1.638896] alloc kstat_irqs on node -1 [ 1.638916] ahci 0000:00:0b.0: irq 26 for MSI/MSI-X [ 1.639029] ahci 0000:00:0b.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x1 impl IDE mode [ 1.639039] ahci 0000:00:0b.0: flags: 64bit ncq sntf led pmp pio sxs [ 1.639048] ahci 0000:00:0b.0: setting latency timer to 64 [ 1.639360] scsi0 : ahci [ 1.639712] scsi1 : ahci [ 1.639890] scsi2 : ahci [ 1.640066] scsi3 : ahci [ 1.640246] scsi4 : ahci [ 1.640421] scsi5 : ahci [ 1.640929] ata1: SATA max UDMA/133 abar m8192@0xf9f76000 port 0xf9f76100 irq 26 [ 1.640936] ata2: DUMMY [ 1.640940] ata3: DUMMY [ 1.640943] ata4: DUMMY [ 1.640947] ata5: DUMMY [ 1.640951] ata6: DUMMY [ 1.642691] vga16fb: initializing [ 1.642701] vga16fb: mapped to 0xffff8800000a0000 [ 1.642876] fb0: VGA16 VGA frame buffer device [ 1.724714] acpi device:11: registered as cooling_device4 [ 1.725071] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:0e/LNXVIDEO:00/input/input6 [ 1.725201] ACPI: Video Device [IGPU] (multi-head: yes rom: no post: no) [ 2.000038] usb 4-3: new full speed USB device using ohci_hcd and address 2 [ 2.160040] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.161076] ata1.00: ATA-8: WDC WD2500BEVT-80A23T0, 01.01A01, max UDMA/133 [ 2.161085] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 2.162282] ata1.00: configured for UDMA/133 [ 2.162567] scsi 0:0:0:0: Direct-Access ATA WDC WD2500BEVT-8 01.0 PQ: 0 ANSI: 5 [ 2.163114] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.163143] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 2.163323] sd 0:0:0:0: [sda] Write Protect is off [ 2.163331] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.163494] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.164104] sda: sda1 sda2 < sda5 > [ 2.226727] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.254062] usb 4-3: configuration #1 chosen from 1 choice [ 2.428414] Console: switching to colour frame buffer device 80x30 [ 3.248091] EXT4-fs (sda1): mounted filesystem with ordered data mode [ 14.336448] udev: starting version 151 [ 14.372437] lp: driver loaded but no devices found [ 14.409609] Adding 9810936k swap on /dev/sda5. Priority:-1 extents:1 across:9810936k [ 14.559068] i2c i2c-0: nForce2 SMBus adapter at 0x4d00 [ 14.559086] ACPI: resource nForce2_smbus [0x4e00-0x4e3f] conflicts with ACPI region SM00 [0x004e00-0x004e3f] [ 14.559096] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 14.559106] nForce2_smbus 0000:00:03.2: Error probing SMB2. [ 14.804525] nvidia: module license 'NVIDIA' taints kernel. [ 14.804537] Disabling lock debugging due to kernel taint [ 14.945439] type=1505 audit(1282764374.218:2): operation="profile_load" pid=640 name="/sbin/dhclient3" [ 14.946226] type=1505 audit(1282764374.218:3): operation="profile_load" pid=640 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 14.946684] type=1505 audit(1282764374.218:4): operation="profile_load" pid=640 name="/usr/lib/connman/scripts/dhclient-script" [ 15.352010] type=1505 audit(1282764374.628:5): operation="profile_load" pid=782 name="/usr/share/gdm/guest-session/Xsession" [ 15.358995] type=1505 audit(1282764374.628:6): operation="profile_replace" pid=783 name="/sbin/dhclient3" [ 15.359805] type=1505 audit(1282764374.628:7): operation="profile_replace" pid=783 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 15.360276] type=1505 audit(1282764374.628:8): operation="profile_replace" pid=783 name="/usr/lib/connman/scripts/dhclient-script" [ 15.371163] type=1505 audit(1282764374.638:9): operation="profile_load" pid=784 name="/usr/bin/evince" [ 15.392553] type=1505 audit(1282764374.668:10): operation="profile_load" pid=784 name="/usr/bin/evince-previewer" [ 15.404991] type=1505 audit(1282764374.678:11): operation="profile_load" pid=784 name="/usr/bin/evince-thumbnailer" [ 16.609040] ACPI: PCI Interrupt Link [LN6A] enabled at IRQ 19 [ 16.609056] alloc irq_desc for 19 on node -1 [ 16.609062] alloc kstat_irqs on node -1 [ 16.609080] atl1c 0000:09:00.0: PCI INT A -> Link[LN6A] -> GSI 19 (level, low) -> IRQ 19 [ 16.609105] atl1c 0000:09:00.0: setting latency timer to 64 [ 16.627963] rtllib_crypt: registered algorithm 'NULL' [ 16.627976] rtllib_crypt: registered algorithm 'TKIP' [ 16.627983] rtllib_crypt: registered algorithm 'CCMP' [ 16.627989] rtllib_crypt: registered algorithm 'WEP' [ 16.627995] [ 16.627997] Linux kernel driver for RTL8192 based WLAN cards [ 16.628004] Copyright (c) 2007-2008, Realsil Wlan Driver [ 16.629397] ACPI: PCI Interrupt Link [LN4A] enabled at IRQ 18 [ 16.629412] alloc irq_desc for 18 on node -1 [ 16.629418] alloc kstat_irqs on node -1 [ 16.629436] rtl819xSE 0000:07:00.0: PCI INT A -> Link[LN4A] -> GSI 18 (level, low) -> IRQ 18 [ 16.629450] rtl819xSE 0000:07:00.0: setting latency timer to 64 [ 16.629878] Memory mapped space start: 0xfbefc000 [ 16.629958] Adapter(8192SE) is found - DeviceID=8171 [ 16.635209] =========>dm_InitRateAdaptiveMask: bUseRAMask=0 [ 16.660493] Bluetooth: Core ver 2.15 [ 16.660903] NET: Registered protocol family 31 [ 16.660911] Bluetooth: HCI device and connection manager initialized [ 16.660920] Bluetooth: HCI socket layer initialized [ 16.674999] Linux video capture interface: v2.00 [ 16.697048] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 16.697919] usbcore: registered new interface driver btusb [ 16.712764] uvcvideo: Found UVC 1.00 device USB 2.0 PC Cam (13d3:5126) [ 16.714827] input: USB 2.0 PC Cam as /devices/pci0000:00/0000:00:04.1/usb1/1-3/1-3:1.0/input/input7 [ 16.715316] usbcore: registered new interface driver uvcvideo [ 16.715992] USB Video Class driver (v0.1.0) [ 16.730855] ppdev: user-space parallel port driver [ 16.734114] atl1c 0000:09:00.0: version 1.0.0.1-NAPI [ 16.740956] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 16.769325] ip_tables: (C) 2000-2006 Netfilter Core Team [ 16.787685] alloc irq_desc for 27 on node -1 [ 16.787696] alloc kstat_irqs on node -1 [ 16.787727] atl1c 0000:09:00.0: irq 27 for MSI/MSI-X [ 16.791054] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 16.848841] ACPI: PCI Interrupt Link [LPMU] enabled at IRQ 20 [ 16.848867] nvidia 0000:00:03.5: PCI INT B -> Link[LPMU] -> GSI 20 (level, low) -> IRQ 20 [ 16.850863] ACPI: PCI Interrupt Link [SGRU] enabled at IRQ 23 [ 16.850888] nvidia 0000:05:00.0: PCI INT A -> Link[SGRU] -> GSI 23 (level, low) -> IRQ 23 [ 16.850922] nvidia 0000:05:00.0: setting latency timer to 64 [ 16.850939] vgaarb: device changed decodes: PCI:0000:05:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 16.853064] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 195.36.24 Thu Apr 22 19:10:14 PDT 2010 [ 16.882140] Bluetooth: L2CAP ver 2.14 [ 16.882149] Bluetooth: L2CAP socket layer initialized [ 16.912041] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 16.912050] Bluetooth: BNEP filters: protocol multicast [ 16.912703] rtl819xSE 0000:07:00.0: firmware: requesting RTL8192SE/rtl8192sfw.bin [ 16.958858] Bridge firewalling registered [ 16.992248] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 16.993648] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use [ 16.993659] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or [ 16.993667] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. [ 17.117644] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1 [ 17.127373] ===>rtllib_start_scan() [ 17.142144] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 17.175192] Bluetooth: SCO (Voice Link) ver 0.6 [ 17.175202] Bluetooth: SCO socket layer initialized [ 17.267908] HDA Intel 0000:00:08.0: power state changed by ACPI to D0 [ 17.268061] HDA Intel 0000:00:08.0: power state changed by ACPI to D0 [ 17.269467] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22 [ 17.269481] HDA Intel 0000:00:08.0: PCI INT A -> Link[LAZA] -> GSI 22 (level, low) -> IRQ 22 [ 17.269492] hda_intel: Disable MSI for Nvidia chipset [ 17.269558] HDA Intel 0000:00:08.0: setting latency timer to 64 [ 17.304842] Bluetooth: RFCOMM TTY layer initialized [ 17.304858] Bluetooth: RFCOMM socket layer initialized [ 17.304864] Bluetooth: RFCOMM ver 1.11 [ 17.666408] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000 [ 17.736428] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8 [ 18.193062] CPU0 attaching NULL sched-domain. [ 18.193078] CPU1 attaching NULL sched-domain. [ 18.193085] CPU2 attaching NULL sched-domain. [ 18.193091] CPU3 attaching NULL sched-domain. [ 19.071554] CPU0 attaching sched-domain: [ 19.071565] domain 0: span 0,2 level SIBLING [ 19.071571] groups: 0 (cpu_power = 589) 2 (cpu_power = 589) [ 19.071585] domain 1: span 0,2 level MC [ 19.071591] groups: 0,2 (cpu_power = 1178) [ 19.071601] domain 2: span 0-3 level CPU [ 19.071607] groups: 0,2 (cpu_power = 1178) 1,3 (cpu_power = 1178) [ 19.071625] CPU1 attaching sched-domain: [ 19.071630] domain 0: span 1,3 level SIBLING [ 19.071636] groups: 1 (cpu_power = 589) 3 (cpu_power = 589) [ 19.071648] domain 1: span 1,3 level MC [ 19.071654] groups: 1,3 (cpu_power = 1178) [ 19.071664] domain 2: span 0-3 level CPU [ 19.071669] groups: 1,3 (cpu_power = 1178) 0,2 (cpu_power = 1178) [ 19.071683] CPU2 attaching sched-domain: [ 19.071688] domain 0: span 0,2 level SIBLING [ 19.071694] groups: 2 (cpu_power = 589) 0 (cpu_power = 589) [ 19.071706] domain 1: span 0,2 level MC [ 19.071712] groups: 0,2 (cpu_power = 1178) [ 19.071721] domain 2: span 0-3 level CPU [ 19.071727] groups: 0,2 (cpu_power = 1178) 1,3 (cpu_power = 1178) [ 19.071742] CPU3 attaching sched-domain: [ 19.071747] domain 0: span 1,3 level SIBLING [ 19.071753] groups: 3 (cpu_power = 589) 1 (cpu_power = 589) [ 19.071765] domain 1: span 1,3 level MC [ 19.071770] groups: 1,3 (cpu_power = 1178) [ 19.071780] domain 2: span 0-3 level CPU [ 19.071785] groups: 1,3 (cpu_power = 1178) 0,2 (cpu_power = 1178) [ 19.131292] hda_codec: ALC269: BIOS auto-probing. [ 19.311566] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:08.0/input/input9 [ 22.647882] CPU0 attaching NULL sched-domain. [ 22.647900] CPU1 attaching NULL sched-domain. [ 22.647911] CPU2 attaching NULL sched-domain. [ 22.647921] CPU3 attaching NULL sched-domain. [ 22.712709] CPU0 attaching sched-domain: [ 22.712719] domain 0: span 0,2 level SIBLING [ 22.712726] groups: 0 (cpu_power = 589) 2 (cpu_power = 589) [ 22.712740] domain 1: span 0,2 level MC [ 22.712746] groups: 0,2 (cpu_power = 1178) [ 22.712756] domain 2: span 0-3 level CPU [ 22.712761] groups: 0,2 (cpu_power = 1178) 1,3 (cpu_power = 1178) [ 22.712779] CPU1 attaching sched-domain: [ 22.712784] domain 0: span 1,3 level SIBLING [ 22.712790] groups: 1 (cpu_power = 589) 3 (cpu_power = 589) [ 22.712803] domain 1: span 1,3 level MC [ 22.712808] groups: 1,3 (cpu_power = 1178) [ 22.712818] domain 2: span 0-3 level CPU [ 22.712824] groups: 1,3 (cpu_power = 1178) 0,2 (cpu_power = 1178) [ 22.712839] CPU2 attaching sched-domain: [ 22.712844] domain 0: span 0,2 level SIBLING [ 22.712850] groups: 2 (cpu_power = 589) 0 (cpu_power = 589) [ 22.712863] domain 1: span 0,2 level MC [ 22.712868] groups: 0,2 (cpu_power = 1178) [ 22.712878] domain 2: span 0-3 level CPU [ 22.712883] groups: 0,2 (cpu_power = 1178) 1,3 (cpu_power = 1178) [ 22.712898] CPU3 attaching sched-domain: [ 22.712903] domain 0: span 1,3 level SIBLING [ 22.712908] groups: 3 (cpu_power = 589) 1 (cpu_power = 589) [ 22.712921] domain 1: span 1,3 level MC [ 22.712926] groups: 1,3 (cpu_power = 1178) [ 22.712936] domain 2: span 0-3 level CPU [ 22.712942] groups: 1,3 (cpu_power = 1178) 0,2 (cpu_power = 1178) [ 37.841935] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1 [ 51.138162] Intel AES-NI instructions are not detected. [ 51.175533] padlock: VIA PadLock not detected. [ 67.842072] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1 [ 74.439208] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1 [ 75.940942] Linking with Makikas,channel:1, qos:0, myHT:1, networkHT:0, mode:6 cur_net.flags:0x407 [ 75.940981] ===>rtllib_associate_procedure_wq(), chan:1 [ 75.940990] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0 [ 75.951119] Linking with Makikas,channel:1, qos:0, myHT:1, networkHT:0, mode:6 cur_net.flags:0x407 [ 75.951154] ===>rtllib_associate_procedure_wq(), chan:1 [ 75.951160] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0 [ 75.963102] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0 [ 75.965773] Associated successfully [ 75.965782] normal associate [ 75.965811] Using G rates:108 [ 75.965815] Successfully associated, ht not enabled(0, 0) [ 75.965822] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 75.968043] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 76.083692] RX: IEEE802.1X EPAOL frame! [ 76.091813] RX: IEEE802.1X EPAOL frame! [ 76.092109] alg name:CCMP [ 76.092141] ===========>set_swcam():EntryNo is 4,KeyIndex is 0,KeyType is 4,is_mesh is 0 [ 76.092303] alg name:CCMP [ 76.092322] ===========>set_swcam():EntryNo is 1,KeyIndex is 1,KeyType is 4,is_mesh is 0 [ 76.723491] DHCP pkt src port:68, dest port:67!! [ 77.120399] dm_check_edca_turbo():iot peer is unknown, bssid:00:25:53:84:1a:84 [ 78.649636] DHCP pkt src port:68, dest port:67!! [ 86.040049] wlan0: no IPv6 routers present [ 107.731322] LPS leave: notify AP we are awaked ++++++++++ SendNullFunctionData [ 107.731433] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 109.350152] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 147.729716] LPS leave: notify AP we are awaked ++++++++++ SendNullFunctionData [ 147.729828] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 149.270160] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 206.650036] rtl8192_hw_wakeup(): RF Change in progress! schedule wake up task again [ 207.729527] LPS leave: notify AP we are awaked ++++++++++ SendNullFunctionData [ 207.729629] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 209.340140] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 280.664672] rtl8192_hw_sleep_down(): RF Change in progress! [ 287.731734] LPS leave: notify AP we are awaked ++++++++++ SendNullFunctionData [ 287.731839] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 289.360169] ===>rtl8192se_link_change():ieee->iw_mode is 2