[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-21-generic (buildd@yellow) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #32-Ubuntu SMP Fri Apr 16 08:09:38 UTC 2010 (Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-21-generic root=UUID=5a236fc1-a44f-4740-843a-b5ace9ed9b64 ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bbef0000 (usable) [ 0.000000] BIOS-e820: 00000000bbef0000 - 00000000bbef3000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bbef3000 - 00000000bbf00000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bc000000 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] DMI present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xbbef0 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF80000000 write-back [ 0.000000] 1 base 0080000000 mask FFC0000000 write-back [ 0.000000] 2 base 00BC000000 mask FFFC000000 uncachable [ 0.000000] 3 base 00BBF00000 mask FFFFF00000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009f800 (usable) [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000bbef0000 (usable) [ 0.000000] modified: 00000000bbef0000 - 00000000bbef3000 (ACPI NVS) [ 0.000000] modified: 00000000bbef3000 - 00000000bbf00000 (ACPI data) [ 0.000000] modified: 00000000bc000000 - 00000000c0000000 (reserved) [ 0.000000] modified: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000bbef0000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0000000000 - 00bbe00000 page 2M [ 0.000000] 00bbe00000 - 00bbef0000 page 4k [ 0.000000] kernel direct mapping tables up to bbef0000 @ 10000-15000 [ 0.000000] RAMDISK: 377ff000 - 37fefeb5 [ 0.000000] ACPI: RSDP 00000000000f76d0 00014 (v00 HP-CPC) [ 0.000000] ACPI: RSDT 00000000bbef3040 00034 (v01 HP-CPC AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP 00000000bbef30c0 00074 (v01 HP-CPC AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: DSDT 00000000bbef3180 06F4F (v01 HP-CPC AWRDACPI 00001000 MSFT 0100000E) [ 0.000000] ACPI: FACS 00000000bbef0000 00040 [ 0.000000] ACPI: SSDT 00000000bbefa200 00118 (v01 HP-CPC POWERNOW 00000001 LTP 00000001) [ 0.000000] ACPI: MCFG 00000000bbefa380 0003C (v01 HP-CPC AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: APIC 00000000bbefa140 0007C (v01 HP-CPC AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-00000000bbef0000 [ 0.000000] Bootmem setup node 0 0000000000000000-00000000bbef0000 [ 0.000000] NODE_DATA [0000000000013000 - 0000000000017fff] [ 0.000000] bootmap [0000000000018000 - 000000000002f7df] pages 18 [ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 00bbef0000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 0001a29e64] TEXT DATA BSS ==> [0001000000 - 0001a29e64] [ 0.000000] #3 [00377ff000 - 0037fefeb5] RAMDISK ==> [00377ff000 - 0037fefeb5] [ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #5 [0001a2a000 - 0001a2a200] BRK ==> [0001a2a000 - 0001a2a200] [ 0.000000] #6 [0000010000 - 0000013000] PGTABLE ==> [0000010000 - 0000013000] [ 0.000000] found SMP MP-table at [ffff8800000f5b40] f5b40 [ 0.000000] [ffffea0000000000-ffffea00029fffff] PMD -> [ffff880002000000-ffff8800049fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000bbef0 [ 0.000000] On node 0 totalpages: 769663 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 102 pages reserved [ 0.000000] DMA zone: 3825 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 10469 pages used for memmap [ 0.000000] DMA32 zone: 755211 pages, LIFO batch:31 [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:30000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880001c00000 s91544 r8192 d23144 u1048576 [ 0.000000] pcpu-alloc: s91544 r8192 d23144 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 759036 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-21-generic root=UUID=5a236fc1-a44f-4740-843a-b5ace9ed9b64 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ a4e000000 size 32 MB [ 0.000000] Aperture beyond 4GB. Ignoring. [ 0.000000] Memory: 3016644k/3079104k available (5409k kernel code, 452k absent, 62008k reserved, 2976k data, 876k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:424 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 31457280 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2405.098 MHz processor. [ 0.020005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4810.19 BogoMIPS (lpj=24050980) [ 0.020032] Security Framework initialized [ 0.020052] AppArmor: AppArmor initialized [ 0.020386] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.022831] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.024002] Mount-cache hash table entries: 256 [ 0.024151] Initializing cgroup subsys ns [ 0.024156] Initializing cgroup subsys cpuacct [ 0.024159] Initializing cgroup subsys memory [ 0.024169] Initializing cgroup subsys devices [ 0.024172] Initializing cgroup subsys freezer [ 0.024174] Initializing cgroup subsys net_cls [ 0.024192] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.024194] CPU: L2 Cache: 512K (64 bytes/line) [ 0.024197] CPU 0/0x0 -> Node 0 [ 0.024199] tseg: 00bbf00000 [ 0.024201] mce: CPU supports 5 MCE banks [ 0.024212] Performance Events: AMD PMU driver. [ 0.024216] ... version: 0 [ 0.024218] ... bit width: 48 [ 0.024219] ... generic registers: 4 [ 0.024221] ... value mask: 0000ffffffffffff [ 0.024222] ... max period: 00007fffffffffff [ 0.024224] ... fixed-purpose events: 0 [ 0.024225] ... event mask: 000000000000000f [ 0.024237] SMP alternatives: switching to UP code [ 0.034289] ACPI: Core revision 20090903 [ 0.045033] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.045038] ftrace: allocating 22518 entries in 89 pages [ 0.050095] Setting APIC routing to flat [ 0.050612] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 0.070000] ..MP-BIOS bug: 8254 timer not connected to IO-APIC [ 0.070000] ...trying to set up timer (IRQ0) through the 8259A ... [ 0.070000] ..... (found apic 0 pin 0) ... [ 0.090000] ....... failed. [ 0.090000] ...trying to set up timer as Virtual Wire IRQ... [ 0.090000] ..... failed. [ 0.090000] ...trying to set up timer as ExtINT IRQ... [ 0.190848] ..... works. [ 0.190850] CPU0: AMD Athlon(tm) 64 Processor 3800+ stepping 02 [ 0.200000] Brought up 1 CPUs [ 0.200000] Total of 1 processors activated (4810.19 BogoMIPS). [ 0.200000] CPU0 attaching NULL sched-domain. [ 0.200000] devtmpfs: initialized [ 0.200000] regulator: core version 0.5 [ 0.200000] Time: 16:25:28 Date: 05/26/10 [ 0.200000] NET: Registered protocol family 16 [ 0.200000] node 0 link 0: io port [1000, ffff] [ 0.200000] TOM: 00000000c0000000 aka 3072M [ 0.200000] node 0 link 0: mmio [a0000, bffff] [ 0.200000] node 0 link 0: mmio [c0000000, efffffff] [ 0.200000] node 0 link 0: mmio [f4000000, fe02ffff] [ 0.200000] node 0 link 0: mmio [f0000000, f03fffff] [ 0.200000] bus: [00,03] on node 0 link 0 [ 0.200000] bus: 00 index 0 io port: [0, ffff] [ 0.200000] bus: 00 index 1 mmio: [a0000, bffff] [ 0.200000] bus: 00 index 2 mmio: [c0000000, f3ffffff] [ 0.200000] bus: 00 index 3 mmio: [f4000000, fcffffffff] [ 0.200000] ACPI: bus type pci registered [ 0.200000] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 255 [ 0.200000] PCI: MCFG area at f0000000 reserved in E820 [ 0.200000] PCI: updated MCFG configuration 0: base f0000000 segment 0 buses 0 - 63 [ 0.200000] PCI: Using MMCONFIG at f0000000 - f3ffffff [ 0.200000] PCI: Using configuration type 1 for base access [ 0.200000] bio: create slab at 0 [ 0.200000] ACPI: EC: Look up EC in DSDT [ 0.201977] ACPI: Interpreter enabled [ 0.201981] ACPI: (supports S0 S1 S3 S4 S5) [ 0.202007] ACPI: Using IOAPIC for interrupt routing [ 0.212029] ACPI: No dock devices found. [ 0.212912] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.213173] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.213176] pci 0000:00:02.0: PME# disabled [ 0.213213] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.213216] pci 0000:00:04.0: PME# disabled [ 0.213234] pci 0000:00:05.0: reg 10 32bit mmio: [0xfc000000-0xfcffffff] [ 0.213239] pci 0000:00:05.0: reg 14 64bit mmio pref: [0xe0000000-0xefffffff] [ 0.213244] pci 0000:00:05.0: reg 1c 64bit mmio: [0xfb000000-0xfbffffff] [ 0.213249] pci 0000:00:05.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] [ 0.213446] HPET not enabled in BIOS. You might try hpet=force boot option [ 0.213490] pci 0000:00:0a.1: reg 20 io port: [0x4c00-0x4c3f] [ 0.213495] pci 0000:00:0a.1: reg 24 io port: [0x4c40-0x4c7f] [ 0.213519] pci 0000:00:0a.1: PME# supported from D3hot D3cold [ 0.213524] pci 0000:00:0a.1: PME# disabled [ 0.213590] pci 0000:00:0b.0: reg 10 32bit mmio: [0xfe02f000-0xfe02ffff] [ 0.213617] pci 0000:00:0b.0: supports D1 D2 [ 0.213619] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.213622] pci 0000:00:0b.0: PME# disabled [ 0.213649] pci 0000:00:0b.1: reg 10 32bit mmio: [0xfe02e000-0xfe02e0ff] [ 0.213678] pci 0000:00:0b.1: supports D1 D2 [ 0.213680] pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.213683] pci 0000:00:0b.1: PME# disabled [ 0.213723] pci 0000:00:0d.0: reg 20 io port: [0xfd00-0xfd0f] [ 0.213765] pci 0000:00:0e.0: reg 10 io port: [0x9f0-0x9f7] [ 0.213769] pci 0000:00:0e.0: reg 14 io port: [0xbf0-0xbf3] [ 0.213773] pci 0000:00:0e.0: reg 18 io port: [0x970-0x977] [ 0.213778] pci 0000:00:0e.0: reg 1c io port: [0xb70-0xb73] [ 0.213782] pci 0000:00:0e.0: reg 20 io port: [0xf800-0xf80f] [ 0.213786] pci 0000:00:0e.0: reg 24 32bit mmio: [0xfe02d000-0xfe02dfff] [ 0.213833] pci 0000:00:0f.0: reg 10 io port: [0x9e0-0x9e7] [ 0.213837] pci 0000:00:0f.0: reg 14 io port: [0xbe0-0xbe3] [ 0.213842] pci 0000:00:0f.0: reg 18 io port: [0x960-0x967] [ 0.213846] pci 0000:00:0f.0: reg 1c io port: [0xb60-0xb63] [ 0.213850] pci 0000:00:0f.0: reg 20 io port: [0xf300-0xf30f] [ 0.213855] pci 0000:00:0f.0: reg 24 32bit mmio: [0xfe02c000-0xfe02cfff] [ 0.213943] pci 0000:00:10.1: reg 10 32bit mmio: [0xfe024000-0xfe027fff] [ 0.213975] pci 0000:00:10.1: PME# supported from D3hot D3cold [ 0.213979] pci 0000:00:10.1: PME# disabled [ 0.214013] pci 0000:00:14.0: reg 10 32bit mmio: [0xfe02b000-0xfe02bfff] [ 0.214018] pci 0000:00:14.0: reg 14 io port: [0xf200-0xf207] [ 0.214040] pci 0000:00:14.0: supports D1 D2 [ 0.214042] pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.214045] pci 0000:00:14.0: PME# disabled [ 0.214162] pci 0000:00:02.0: bridge io port: [0xe000-0xefff] [ 0.214164] pci 0000:00:02.0: bridge 32bit mmio: [0xfde00000-0xfdefffff] [ 0.214168] pci 0000:00:02.0: bridge 64bit mmio pref: [0xfdb00000-0xfdbfffff] [ 0.214207] pci 0000:00:04.0: bridge io port: [0xc000-0xcfff] [ 0.214209] pci 0000:00:04.0: bridge 32bit mmio: [0xfda00000-0xfdafffff] [ 0.214213] pci 0000:00:04.0: bridge 64bit mmio pref: [0xfd900000-0xfd9fffff] [ 0.214245] pci 0000:03:05.0: reg 10 32bit mmio: [0xfddff000-0xfddfffff] [ 0.214280] pci 0000:03:05.0: supports D1 D2 [ 0.214282] pci 0000:03:05.0: PME# supported from D0 D1 D2 D3hot [ 0.214285] pci 0000:03:05.0: PME# disabled [ 0.214315] pci 0000:03:08.0: reg 10 io port: [0xde00-0xdeff] [ 0.214321] pci 0000:03:08.0: reg 14 32bit mmio: [0xfddfe000-0xfddfe0ff] [ 0.214353] pci 0000:03:08.0: supports D1 D2 [ 0.214355] pci 0000:03:08.0: PME# supported from D0 D1 D2 D3hot [ 0.214359] pci 0000:03:08.0: PME# disabled [ 0.214387] pci 0000:00:10.0: transparent bridge [ 0.214390] pci 0000:00:10.0: bridge io port: [0xd000-0xdfff] [ 0.214393] pci 0000:00:10.0: bridge 32bit mmio: [0xfdd00000-0xfddfffff] [ 0.214396] pci 0000:00:10.0: bridge 32bit mmio pref: [0xfdc00000-0xfdcfffff] [ 0.214408] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.214650] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.329774] ACPI: PCI Interrupt Link [LNK1] (IRQs *5 7 9 10 11 14 15) [ 0.330006] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.330211] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.330414] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.330618] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.330823] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.331031] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 *7 9 10 11 14 15) [ 0.331235] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.331439] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.331644] ACPI: PCI Interrupt Link [LUBB] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.331849] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 *10 11 14 15) [ 0.332053] ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.332258] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15) [ 0.332462] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.332666] ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.332870] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.333074] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.333278] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.333484] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15) [ 0.333694] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 *10 11 14 15) [ 0.333944] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0 [ 0.334187] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. [ 0.334425] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. [ 0.334663] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. [ 0.334901] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled. [ 0.335138] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled. [ 0.335376] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0 [ 0.335613] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled. [ 0.335850] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled. [ 0.336090] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled. [ 0.336331] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 [ 0.336575] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled. [ 0.336813] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled. [ 0.337052] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0 [ 0.337290] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled. [ 0.337530] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled. [ 0.337769] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled. [ 0.338008] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. [ 0.338247] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. [ 0.338486] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 [ 0.338724] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0 [ 0.338849] vgaarb: device added: PCI:0000:00:05.0,decodes=io+mem,owns=io+mem,locks=none [ 0.338857] vgaarb: loaded [ 0.338961] SCSI subsystem initialized [ 0.339028] libata version 3.00 loaded. [ 0.339091] usbcore: registered new interface driver usbfs [ 0.339100] usbcore: registered new interface driver hub [ 0.339122] usbcore: registered new device driver usb [ 0.339232] ACPI: WMI: Mapper loaded [ 0.339234] PCI: Using ACPI for IRQ routing [ 0.339374] NetLabel: Initializing [ 0.339375] NetLabel: domain hash size = 128 [ 0.339376] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.339389] NetLabel: unlabeled traffic allowed by default [ 0.340901] AppArmor: AppArmor Filesystem Enabled [ 0.340922] pnp: PnP ACPI init [ 0.340939] ACPI: bus type pnp registered [ 0.346296] pnp: PnP ACPI: found 10 devices [ 0.346299] ACPI: ACPI bus type pnp unregistered [ 0.346310] system 00:01: ioport range 0x4000-0x407f has been reserved [ 0.346313] system 00:01: ioport range 0x4080-0x40ff has been reserved [ 0.346315] system 00:01: ioport range 0x4400-0x447f has been reserved [ 0.346318] system 00:01: ioport range 0x4480-0x44ff has been reserved [ 0.346320] system 00:01: ioport range 0x4800-0x487f has been reserved [ 0.346323] system 00:01: ioport range 0x4880-0x48ff has been reserved [ 0.346326] system 00:01: ioport range 0x2000-0x207f has been reserved [ 0.346328] system 00:01: ioport range 0x2080-0x20ff has been reserved [ 0.346331] system 00:01: iomem range 0xbc000000-0xbfffffff has been reserved [ 0.346336] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 0.346338] system 00:02: ioport range 0x800-0x87f has been reserved [ 0.346344] system 00:08: iomem range 0xf0000000-0xf3ffffff has been reserved [ 0.346348] system 00:09: iomem range 0xf0000-0xf3fff could not be reserved [ 0.346351] system 00:09: iomem range 0xf4000-0xf7fff could not be reserved [ 0.346353] system 00:09: iomem range 0xf8000-0xfbfff could not be reserved [ 0.346356] system 00:09: iomem range 0xfc000-0xfffff could not be reserved [ 0.346359] system 00:09: iomem range 0xbbef0000-0xbbefffff could not be reserved [ 0.346361] system 00:09: iomem range 0xffff0000-0xffffffff has been reserved [ 0.346364] system 00:09: iomem range 0x0-0x9ffff could not be reserved [ 0.346367] system 00:09: iomem range 0x100000-0xbbeeffff could not be reserved [ 0.346369] system 00:09: iomem range 0xbbf00000-0xbfefffff could not be reserved [ 0.346372] system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.346375] system 00:09: iomem range 0xfee00000-0xfeefffff has been reserved [ 0.346377] system 00:09: iomem range 0xfefff000-0xfeffffff has been reserved [ 0.346380] system 00:09: iomem range 0xfff80000-0xfff80fff has been reserved [ 0.346383] system 00:09: iomem range 0xfff90000-0xfffbffff has been reserved [ 0.346385] system 00:09: iomem range 0xfffed000-0xfffeffff has been reserved [ 0.351083] Switching to clocksource acpi_pm [ 0.351190] pci 0000:00:02.0: PCI bridge, secondary bus 0000:01 [ 0.351193] pci 0000:00:02.0: IO window: 0xe000-0xefff [ 0.351196] pci 0000:00:02.0: MEM window: 0xfde00000-0xfdefffff [ 0.351199] pci 0000:00:02.0: PREFETCH window: 0x000000fdb00000-0x000000fdbfffff [ 0.351202] pci 0000:00:04.0: PCI bridge, secondary bus 0000:02 [ 0.351204] pci 0000:00:04.0: IO window: 0xc000-0xcfff [ 0.351207] pci 0000:00:04.0: MEM window: 0xfda00000-0xfdafffff [ 0.351210] pci 0000:00:04.0: PREFETCH window: 0x000000fd900000-0x000000fd9fffff [ 0.351214] pci 0000:00:10.0: PCI bridge, secondary bus 0000:03 [ 0.351216] pci 0000:00:10.0: IO window: 0xd000-0xdfff [ 0.351219] pci 0000:00:10.0: MEM window: 0xfdd00000-0xfddfffff [ 0.351222] pci 0000:00:10.0: PREFETCH window: 0xfdc00000-0xfdcfffff [ 0.351232] pci 0000:00:02.0: setting latency timer to 64 [ 0.351236] pci 0000:00:04.0: setting latency timer to 64 [ 0.351241] pci 0000:00:10.0: setting latency timer to 64 [ 0.351245] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.351247] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.351249] pci_bus 0000:01: resource 0 io: [0xe000-0xefff] [ 0.351251] pci_bus 0000:01: resource 1 mem: [0xfde00000-0xfdefffff] [ 0.351254] pci_bus 0000:01: resource 2 pref mem [0xfdb00000-0xfdbfffff] [ 0.351256] pci_bus 0000:02: resource 0 io: [0xc000-0xcfff] [ 0.351258] pci_bus 0000:02: resource 1 mem: [0xfda00000-0xfdafffff] [ 0.351260] pci_bus 0000:02: resource 2 pref mem [0xfd900000-0xfd9fffff] [ 0.351263] pci_bus 0000:03: resource 0 io: [0xd000-0xdfff] [ 0.351265] pci_bus 0000:03: resource 1 mem: [0xfdd00000-0xfddfffff] [ 0.351267] pci_bus 0000:03: resource 2 pref mem [0xfdc00000-0xfdcfffff] [ 0.351269] pci_bus 0000:03: resource 3 io: [0x00-0xffff] [ 0.351271] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.351306] NET: Registered protocol family 2 [ 0.351456] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.352956] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.357632] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.358224] TCP: Hash tables configured (established 524288 bind 65536) [ 0.358227] TCP reno registered [ 0.358325] NET: Registered protocol family 1 [ 0.358351] pci 0000:00:00.0: Found disabled HT MSI Mapping [ 0.358355] pci 0000:00:00.0: Enabling HT MSI Mapping [ 0.358387] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.358407] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.358412] pci 0000:00:05.0: Boot video device [ 0.400070] pci 0000:00:09.0: Found disabled HT MSI Mapping [ 0.400077] pci 0000:00:0e.0: Enabling HT MSI Mapping [ 0.400130] pci 0000:00:09.0: Found disabled HT MSI Mapping [ 0.400137] pci 0000:00:0f.0: Enabling HT MSI Mapping [ 0.400192] pci 0000:00:09.0: Found disabled HT MSI Mapping [ 0.400197] pci 0000:00:10.0: Enabling HT MSI Mapping [ 0.400254] pci 0000:00:09.0: Found disabled HT MSI Mapping [ 0.400262] pci 0000:00:10.1: Enabling HT MSI Mapping [ 0.400590] Scanning for low memory corruption every 60 seconds [ 0.400708] audit: initializing netlink socket (disabled) [ 0.400718] type=2000 audit(1274891127.400:1): initialized [ 0.408490] Trying to unpack rootfs image as initramfs... [ 0.420335] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.421487] VFS: Disk quotas dquot_6.5.2 [ 0.421535] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.422110] fuse init (API version 7.13) [ 0.422177] msgmni has been set to 5891 [ 0.430339] alg: No test for stdrng (krng) [ 0.430423] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.430425] io scheduler noop registered [ 0.430427] io scheduler anticipatory registered [ 0.430429] io scheduler deadline registered [ 0.430462] io scheduler cfq registered (default) [ 0.430605] alloc irq_desc for 24 on node 0 [ 0.430607] alloc kstat_irqs on node 0 [ 0.430615] pcieport 0000:00:02.0: irq 24 for MSI/MSI-X [ 0.430619] pcieport 0000:00:02.0: setting latency timer to 64 [ 0.430710] alloc irq_desc for 25 on node 0 [ 0.430712] alloc kstat_irqs on node 0 [ 0.430716] pcieport 0000:00:04.0: irq 25 for MSI/MSI-X [ 0.430720] pcieport 0000:00:04.0: setting latency timer to 64 [ 0.430773] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.430792] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.430882] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.430885] ACPI: Power Button [PWRB] [ 0.430934] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.430936] ACPI: Power Button [PWRF] [ 0.430983] fan PNP0C0B:00: registered as cooling_device0 [ 0.430988] ACPI: Fan [FAN] (on) [ 0.431513] processor LNXCPU:00: registered as cooling_device1 [ 0.438749] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.438755] ACPI: Thermal Zone [THRM] (40 C) [ 0.450274] Linux agpgart interface v0.103 [ 0.450310] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.451281] brd: module loaded [ 0.451644] loop: module loaded [ 0.451721] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.451952] pata_acpi 0000:00:0d.0: setting latency timer to 64 [ 0.452380] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23 [ 0.452384] alloc irq_desc for 23 on node 0 [ 0.452386] alloc kstat_irqs on node 0 [ 0.452396] pata_acpi 0000:00:0e.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23 [ 0.452417] pata_acpi 0000:00:0e.0: setting latency timer to 64 [ 0.452423] pata_acpi 0000:00:0e.0: PCI INT A disabled [ 0.460633] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22 [ 0.460639] alloc irq_desc for 22 on node 0 [ 0.460641] alloc kstat_irqs on node 0 [ 0.460651] pata_acpi 0000:00:0f.0: PCI INT A -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22 [ 0.460688] pata_acpi 0000:00:0f.0: setting latency timer to 64 [ 0.460696] pata_acpi 0000:00:0f.0: PCI INT A disabled [ 0.461076] Fixed MDIO Bus: probed [ 0.461104] PPP generic driver version 2.4.2 [ 0.461155] tun: Universal TUN/TAP device driver, 1.6 [ 0.461157] tun: (C) 1999-2004 Max Krasnyansky [ 0.461242] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.461668] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21 [ 0.461671] alloc irq_desc for 21 on node 0 [ 0.461672] alloc kstat_irqs on node 0 [ 0.461681] ehci_hcd 0000:00:0b.1: PCI INT B -> Link[APCL] -> GSI 21 (level, low) -> IRQ 21 [ 0.461695] ehci_hcd 0000:00:0b.1: setting latency timer to 64 [ 0.461698] ehci_hcd 0000:00:0b.1: EHCI Host Controller [ 0.461727] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1 [ 0.461756] ehci_hcd 0000:00:0b.1: debug port 1 [ 0.461763] ehci_hcd 0000:00:0b.1: cache line size of 64 is not supported [ 0.461786] ehci_hcd 0000:00:0b.1: irq 21, io mem 0xfe02e000 [ 0.480047] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00 [ 0.480180] usb usb1: configuration #1 chosen from 1 choice [ 0.480207] hub 1-0:1.0: USB hub found [ 0.480216] hub 1-0:1.0: 8 ports detected [ 0.480299] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.490665] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20 [ 0.490672] alloc irq_desc for 20 on node 0 [ 0.490673] alloc kstat_irqs on node 0 [ 0.490684] ohci_hcd 0000:00:0b.0: PCI INT A -> Link[APCF] -> GSI 20 (level, low) -> IRQ 20 [ 0.490704] ohci_hcd 0000:00:0b.0: setting latency timer to 64 [ 0.490706] ohci_hcd 0000:00:0b.0: OHCI Host Controller [ 0.490777] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2 [ 0.490812] ohci_hcd 0000:00:0b.0: irq 20, io mem 0xfe02f000 [ 0.552160] usb usb2: configuration #1 chosen from 1 choice [ 0.552186] hub 2-0:1.0: USB hub found [ 0.552197] hub 2-0:1.0: 8 ports detected [ 0.552274] uhci_hcd: USB Universal Host Controller Interface driver [ 0.552350] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 0.552352] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 0.552857] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.552932] mice: PS/2 mouse device common for all mice [ 0.553017] rtc_cmos 00:04: RTC can wake from S4 [ 0.553058] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 0.553089] rtc0: alarms up to one year, y3k, 242 bytes nvram [ 0.553207] device-mapper: uevent: version 1.0.3 [ 0.556552] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.558380] device-mapper: multipath: version 1.1.0 loaded [ 0.558384] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.565318] cpuidle: using governor ladder [ 0.565321] cpuidle: using governor menu [ 0.565679] TCP cubic registered [ 0.565797] NET: Registered protocol family 10 [ 0.566195] lo: Disabled Privacy Extensions [ 0.566457] NET: Registered protocol family 17 [ 0.566492] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3800+ processors (1 cpu cores) (version 2.20.00) [ 0.566544] powernow-k8: 0 : fid 0x10 (2400 MHz), vid 0x8 [ 0.566546] powernow-k8: 1 : fid 0xe (2200 MHz), vid 0x8 [ 0.566548] powernow-k8: 2 : fid 0xc (2000 MHz), vid 0xa [ 0.566549] powernow-k8: 3 : fid 0xa (1800 MHz), vid 0xc [ 0.566551] powernow-k8: 4 : fid 0x2 (1000 MHz), vid 0x12 [ 0.566665] PM: Resume from disk failed. [ 0.566675] registered taskstats version 1 [ 0.566977] Magic number: 10:20:440 [ 0.567067] rtc_cmos 00:04: setting system clock to 2010-05-26 16:25:28 UTC (1274891128) [ 0.567070] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.567071] EDD information not available. [ 0.581033] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.605941] Freeing initrd memory: 8131k freed [ 0.610931] Freeing unused kernel memory: 876k freed [ 0.611472] Write protecting the kernel read-only data: 7680k [ 0.630285] udev: starting version 151 [ 0.800058] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 0.852025] pata_amd 0000:00:0d.0: version 0.4.1 [ 0.852076] pata_amd 0000:00:0d.0: setting latency timer to 64 [ 0.852162] scsi0 : pata_amd [ 0.852361] scsi1 : pata_amd [ 0.853143] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfd00 irq 14 [ 0.853145] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfd08 irq 15 [ 0.853440] sata_nv 0000:00:0e.0: version 3.5 [ 0.853449] sata_nv 0000:00:0e.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23 [ 0.853451] sata_nv 0000:00:0e.0: Using SWNCQ mode [ 0.853497] sata_nv 0000:00:0e.0: setting latency timer to 64 [ 0.856077] scsi2 : sata_nv [ 0.856610] scsi3 : sata_nv [ 0.856855] ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xf800 irq 23 [ 0.856858] ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xf808 irq 23 [ 0.856970] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 0.857388] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23 [ 0.857393] forcedeth 0000:00:14.0: PCI INT A -> Link[APCH] -> GSI 23 (level, low) -> IRQ 23 [ 0.857398] forcedeth 0000:00:14.0: setting latency timer to 64 [ 0.857449] nv_probe: set workaround bit for reversed mac addr [ 0.955027] usb 1-1: configuration #1 chosen from 1 choice [ 0.955488] hub 1-1:1.0: USB hub found [ 0.956076] hub 1-1:1.0: 4 ports detected [ 1.080022] usb 1-2: new high speed USB device using ehci_hcd and address 3 [ 1.220317] ata2.00: ATAPI: TSSTcorpCD/DVDW TS-H552L, 0614, max UDMA/33 [ 1.220339] ata2: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc000) ACPI=0x701f (60:600:0x13) [ 1.235145] usb 1-2: configuration #1 chosen from 1 choice [ 1.235621] hub 1-2:1.0: USB hub found [ 1.236313] hub 1-2:1.0: 4 ports detected [ 1.280261] ata2.00: configured for UDMA/33 [ 1.281942] scsi 1:0:0:0: CD-ROM TSSTcorp CD/DVDW TS-H552L 0614 PQ: 0 ANSI: 5 [ 1.291513] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray [ 1.291516] Uniform CD-ROM driver Revision: 3.20 [ 1.291710] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.291810] sr 1:0:0:0: Attached scsi generic sg0 type 5 [ 1.340051] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.360182] ata3.00: ATA-7: ST3200826AS, 3.03, max UDMA/100 [ 1.360185] ata3.00: 390721968 sectors, multi 1: LBA48 [ 1.380965] forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x732 @ 13, addr 00:17:31:06:2e:c8 [ 1.380968] forcedeth 0000:00:14.0: highdma pwrctl lnktim desc-v3 [ 1.381373] ata3.00: configured for UDMA/100 [ 1.381463] scsi 2:0:0:0: Direct-Access ATA ST3200826AS 3.03 PQ: 0 ANSI: 5 [ 1.381595] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 1.381774] sd 2:0:0:0: [sda] 390721968 512-byte logical blocks: (200 GB/186 GiB) [ 1.381811] sd 2:0:0:0: [sda] Write Protect is off [ 1.381813] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.381832] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.381943] sda: [ 1.382049] sata_nv 0000:00:0f.0: PCI INT A -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22 [ 1.382052] sata_nv 0000:00:0f.0: Using SWNCQ mode [ 1.382100] sata_nv 0000:00:0f.0: setting latency timer to 64 [ 1.382231] scsi4 : sata_nv [ 1.382374] scsi5 : sata_nv [ 1.382587] ata5: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xf300 irq 22 [ 1.382590] ata6: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xf308 irq 22 [ 1.405332] sda1 sda2 < sda5 > sda3 sda4 [ 1.438334] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.591208] usb 1-1.2: new full speed USB device using ehci_hcd and address 5 [ 1.705417] usb 1-1.2: configuration #1 chosen from 1 choice [ 1.720688] ata5: SATA link down (SStatus 0 SControl 300) [ 1.731291] ata4: SATA link down (SStatus 0 SControl 300) [ 1.884980] kjournald starting. Commit interval 5 seconds [ 1.884990] EXT3-fs: mounted filesystem with ordered data mode. [ 1.941210] usb 1-1.3: new low speed USB device using ehci_hcd and address 6 [ 2.055278] usb 1-1.3: configuration #1 chosen from 1 choice [ 2.070570] ata6: SATA link down (SStatus 0 SControl 300) [ 2.291206] usb 1-1.4: new low speed USB device using ehci_hcd and address 7 [ 2.406280] usb 1-1.4: configuration #1 chosen from 1 choice [ 2.740038] usb 2-8: new full speed USB device using ohci_hcd and address 2 [ 2.969161] usb 2-8: configuration #1 chosen from 1 choice [ 3.211207] usb 1-2.2: new full speed USB device using ehci_hcd and address 8 [ 13.320185] usb 1-2.2: configuration #1 chosen from 1 choice [ 17.202273] Adding 2097140k swap on /dev/sda4. Priority:-1 extents:1 across:2097140k [ 17.234479] udev: starting version 151 [ 17.510683] type=1505 audit(1274916345.442:2): operation="profile_load" pid=525 name="/sbin/dhclient3" [ 17.511522] type=1505 audit(1274916345.442:3): operation="profile_load" pid=525 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 17.511657] type=1505 audit(1274916345.442:4): operation="profile_load" pid=525 name="/usr/lib/connman/scripts/dhclient-script" [ 17.585058] EDAC MC: Ver: 2.1.0 Apr 16 2010 [ 17.656765] Initializing USB Mass Storage driver... [ 17.661936] EDAC amd64_edac: Ver: 3.2.0 Apr 16 2010 [ 17.698526] vga16fb: initializing [ 17.698531] vga16fb: mapped to 0xffff8800000a0000 [ 17.698585] fb0: VGA16 VGA frame buffer device [ 17.706069] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3). [ 17.706076] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 17.706077] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 17.706078] (Note that use of the override may cause unknown side effects.) [ 17.706098] amd64_edac: probe of 0000:00:18.2 failed with error -22 [ 17.728924] scsi6 : SCSI emulation for USB Mass Storage devices [ 17.757945] usbcore: registered new interface driver usb-storage [ 17.757953] USB Mass Storage support registered. [ 17.758581] usb-storage: device found at 2 [ 17.758583] usb-storage: waiting for device to settle before scanning [ 17.759521] ACPI: resource nForce2_smbus [0x4c00-0x4c3f] conflicts with ACPI region SM00 [0x4c00-0x4c05] [ 17.759525] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 17.759527] nForce2_smbus 0000:00:0a.1: Error probing SMB1. [ 17.759691] i2c i2c-0: nForce2 SMBus adapter at 0x4c40 [ 17.776509] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 [ 17.776515] alloc irq_desc for 19 on node 0 [ 17.776517] alloc kstat_irqs on node 0 [ 17.776528] ohci1394 0000:03:05.0: PCI INT A -> Link[APC4] -> GSI 19 (level, low) -> IRQ 19 [ 17.832079] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19] MMIO=[fddff000-fddff7ff] Max Packet=[1024] IR/IT contexts=[8/8] [ 17.842704] usbcore: registered new interface driver hiddev [ 17.846019] input: Logitech USB Trackball as /devices/pci0000:00/0000:00:0b.1/usb1/1-1/1-1.4/1-1.4:1.0/input/input4 [ 17.846118] generic-usb 0003:046D:C408.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Trackball] on usb-0000:00:0b.1-1.4/input0 [ 17.846147] usbcore: registered new interface driver usbhid [ 17.846149] usbhid: v2.6:USB HID core driver [ 18.489527] EXT3 FS on sda3, internal journal [ 18.776574] nvidia: module license 'NVIDIA' taints kernel. [ 18.776579] Disabling lock debugging due to kernel taint [ 19.453538] cfg80211: Calling CRDA to update world regulatory domain [ 19.460222] input: Wacom Graphire4 4x5 as /devices/pci0000:00/0000:00:0b.1/usb1/1-1/1-1.3/1-1.3:1.0/input/input5 [ 19.461707] Bluetooth: Core ver 2.15 [ 19.462678] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x413C pid 0x5008 [ 19.462702] usbcore: registered new interface driver usblp [ 19.466530] NET: Registered protocol family 31 [ 19.466533] Bluetooth: HCI device and connection manager initialized [ 19.466536] Bluetooth: HCI socket layer initialized [ 19.470619] usbcore: registered new interface driver wacom [ 19.470623] wacom: v1.52:USB Wacom tablet driver [ 19.476250] ACPI: PCI Interrupt Link [APC7] enabled at IRQ 16 [ 19.476256] alloc irq_desc for 16 on node 0 [ 19.476258] alloc kstat_irqs on node 0 [ 19.476269] nvidia 0000:00:05.0: PCI INT A -> Link[APC7] -> GSI 16 (level, low) -> IRQ 16 [ 19.476275] nvidia 0000:00:05.0: setting latency timer to 64 [ 19.476279] vgaarb: device changed decodes: PCI:0000:00:05.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 19.477194] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 195.36.15 Fri Mar 12 00:29:13 PST 2010 [ 19.496067] cfg80211: World regulatory domain updated: [ 19.496071] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 19.496073] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 19.496076] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 19.496078] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 19.496080] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 19.496082] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 19.613612] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 19.613967] usbcore: registered new interface driver btusb [ 19.651235] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 [ 19.651241] rtl8180 0000:03:08.0: PCI INT A -> Link[APC1] -> GSI 16 (level, low) -> IRQ 16 [ 19.664096] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d800009dc153] [ 19.712087] lp: driver loaded but no devices found [ 20.198555] Console: switching to colour frame buffer device 80x30 [ 20.234333] phy0: Selected rate control algorithm 'minstrel' [ 20.234923] phy0: hwaddr 00:40:f4:94:32:16, RTL8180vF + Philips [ 20.911125] type=1505 audit(1274916348.842:5): operation="profile_load" pid=866 name="/usr/share/gdm/guest-session/Xsession" [ 20.915545] type=1505 audit(1274916348.842:6): operation="profile_replace" pid=867 name="/sbin/dhclient3" [ 20.915794] type=1505 audit(1274916348.842:7): operation="profile_replace" pid=867 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 20.915934] type=1505 audit(1274916348.842:8): operation="profile_replace" pid=867 name="/usr/lib/connman/scripts/dhclient-script" [ 20.934995] type=1505 audit(1274916348.862:9): operation="profile_load" pid=868 name="/usr/bin/evince" [ 20.938115] type=1505 audit(1274916348.862:10): operation="profile_load" pid=868 name="/usr/bin/evince-previewer" [ 20.940133] type=1505 audit(1274916348.872:11): operation="profile_load" pid=868 name="/usr/bin/evince-thumbnailer" [ 21.120535] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22 [ 21.120541] HDA Intel 0000:00:10.1: PCI INT B -> Link[AAZA] -> GSI 22 (level, low) -> IRQ 22 [ 21.120546] hda_intel: Disable MSI for Nvidia chipset [ 21.120575] HDA Intel 0000:00:10.1: setting latency timer to 64 [ 21.288031] Bluetooth: L2CAP ver 2.14 [ 21.288034] Bluetooth: L2CAP socket layer initialized [ 21.319966] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 21.319970] Bluetooth: BNEP filters: protocol multicast [ 21.380913] Bridge firewalling registered [ 21.391391] ppdev: user-space parallel port driver [ 22.200734] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 22.208744] eth0: no link during initialization. [ 22.209617] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 22.232407] Bluetooth: SCO (Voice Link) ver 0.6 [ 22.232411] Bluetooth: SCO socket layer initialized [ 22.390062] Bluetooth: RFCOMM TTY layer initialized [ 22.390067] Bluetooth: RFCOMM socket layer initialized [ 22.390069] Bluetooth: RFCOMM ver 1.11 [ 22.751108] usb-storage: device scan complete [ 22.758088] scsi 6:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0 [ 22.765079] scsi 6:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0 [ 22.772078] scsi 6:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0 [ 22.779077] scsi 6:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0 [ 22.781152] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 22.782010] sd 6:0:0:1: Attached scsi generic sg3 type 0 [ 22.782887] sd 6:0:0:2: Attached scsi generic sg4 type 0 [ 22.783755] sd 6:0:0:3: Attached scsi generic sg5 type 0 [ 22.910718] usb 1-1.2: usbfs: interface 0 claimed by usblp while 'usb' sets config #1 [ 22.938109] sd 6:0:0:1: [sdc] Attached SCSI removable disk [ 22.949210] sd 6:0:0:2: [sdd] Attached SCSI removable disk [ 23.049116] sd 6:0:0:0: [sdb] Attached SCSI removable disk [ 23.060100] sd 6:0:0:3: [sde] Attached SCSI removable disk [ 23.080073] hda_codec: ALC883: BIOS auto-probing. [ 23.860141] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:10.1/input/input6 [ 32.650084] wlan0: deauthenticating from 00:1c:df:3d:0a:33 by local choice (reason=3) [ 32.850038] wlan0: direct probe to AP 00:1c:df:3d:0a:33 (try 1) [ 32.852056] wlan0: direct probe responded [ 32.852061] wlan0: authenticate with AP 00:1c:df:3d:0a:33 (try 1) [ 32.853747] wlan0: authenticated [ 32.853766] wlan0: associate with AP 00:1c:df:3d:0a:33 (try 1) [ 32.862784] wlan0: RX AssocResp from 00:1c:df:3d:0a:33 (capab=0x431 status=0 aid=1) [ 32.862788] wlan0: associated [ 32.863491] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 32.863580] cfg80211: Calling CRDA for country: US [ 32.878491] cfg80211: Received country IE: [ 32.878494] cfg80211: Regulatory domain: US [ 32.878496] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 32.878498] (2402000 KHz - 2477000 KHz @ 40000 KHz), (10000 mBi, 10000 mBm) [ 32.878500] cfg80211: CRDA thinks this should applied: [ 32.878501] cfg80211: Regulatory domain: US [ 32.878503] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 32.878505] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 32.878507] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 32.878509] (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 32.878511] (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 32.878513] (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 32.878515] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 32.878517] cfg80211: We intersect both of these and get: [ 32.878518] cfg80211: Regulatory domain: 98 [ 32.878519] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 32.878521] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 32.878526] cfg80211: Disabling channel 2467 MHz on phy0 due to Country IE [ 32.878528] cfg80211: Disabling channel 2472 MHz on phy0 due to Country IE [ 32.878530] cfg80211: Disabling channel 2484 MHz on phy0 due to Country IE [ 32.878533] cfg80211: Current regulatory domain updated by AP to: US [ 32.878534] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 32.878536] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 43.440023] wlan0: no IPv6 routers present [ 83.190033] Clocksource tsc unstable (delta = -101842446 ns)