[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31-14-generic (buildd@samarium) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #48+ureadahead2-Ubuntu SMP Wed Oct 28 15:34:04 UTC 2009 (Ubuntu 2.6.31-14.48+ureadahead2-generic) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) [ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.2 present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x3fff0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FC0000000 write-back [ 0.000000] 1 base 0D0000000 mask FF8000000 write-combining [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 00000000000a0000 (usable) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000003fff0000 (usable) [ 0.000000] modified: 000000003fff0000 - 000000003fff3000 (ACPI NVS) [ 0.000000] modified: 000000003fff3000 - 0000000040000000 (ACPI data) [ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ffff0000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000 [ 0.000000] RAMDISK: 2f8e8000 - 30033995 [ 0.000000] ACPI: RSDP 000f7320 00014 (v00 Nvidia) [ 0.000000] ACPI: RSDT 3fff3000 0002C (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP 3fff3040 00074 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: DSDT 3fff30c0 04920 (v01 NVIDIA AWRDACPI 00001000 MSFT 0100000D) [ 0.000000] ACPI: FACS 3fff0000 00040 [ 0.000000] ACPI: APIC 3fff7a00 0005A (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 135MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00011000 - 00017f00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008a80a0] TEXT DATA BSS ==> [0000100000 - 00008a80a0] [ 0.000000] #4 [002f8e8000 - 0030033995] RAMDISK ==> [002f8e8000 - 0030033995] [ 0.000000] #5 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] [ 0.000000] #6 [00008a9000 - 00008ac072] BRK ==> [00008a9000 - 00008ac072] [ 0.000000] #7 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] [ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0003fff0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x000000a0 [ 0.000000] 0: 0x00000100 -> 0x0003fff0 [ 0.000000] On node 0 totalpages: 262016 [ 0.000000] free_area_init_node: node 0, pgdat c0784980, node_mem_map c1000200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3952 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 272 pages used for memmap [ 0.000000] HighMem zone: 34530 pages, LIFO batch:7 [ 0.000000] Using APIC driver default [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000) [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages at c1805000, static data 35612 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259968 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-14-generic root=UUID=e99b0918-909b-4fa8-a030-fb06907e3a95 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 5242240 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:0003fff0) [ 0.000000] Memory: 1018136k/1048512k available (4567k kernel code, 29536k reserved, 2141k data, 540k init, 139208k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc078e000 - 0xc0815000 ( 540 kB) [ 0.000000] .data : 0xc0575ef4 - 0xc078d488 (2141 kB) [ 0.000000] .text : 0xc0100000 - 0xc0575ef4 (4567 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:2304 nr_irqs:256 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1844.309 MHz processor. [ 0.001838] Console: colour VGA+ 80x25 [ 0.001843] console [tty0] enabled [ 0.001907] Calibrating delay loop (skipped), value calculated using timer frequency.. 3688.61 BogoMIPS (lpj=7377236) [ 0.001937] Security Framework initialized [ 0.001971] AppArmor: AppArmor initialized [ 0.001981] Mount-cache hash table entries: 512 [ 0.002157] Initializing cgroup subsys ns [ 0.002162] Initializing cgroup subsys cpuacct [ 0.002168] Initializing cgroup subsys memory [ 0.002179] Initializing cgroup subsys freezer [ 0.002183] Initializing cgroup subsys net_cls [ 0.002199] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.002202] CPU: L2 Cache: 512K (64 bytes/line) [ 0.002208] mce: CPU supports 4 MCE banks [ 0.002229] Performance Counters: AMD PMU driver. [ 0.002237] ... version: 0 [ 0.002240] ... bit width: 48 [ 0.002242] ... generic counters: 4 [ 0.002244] ... value mask: 0000ffffffffffff [ 0.002247] ... max period: 00007fffffffffff [ 0.002250] ... fixed-purpose counters: 0 [ 0.002252] ... counter mask: 000000000000000f [ 0.002257] Checking 'hlt' instruction... OK. [ 0.016569] SMP alternatives: switching to UP code [ 0.022553] Freeing SMP alternatives: 19k freed [ 0.022576] ACPI: Core revision 20090521 [ 0.031312] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 0.071002] CPU0: AMD Athlon(tm) stepping 00 [ 0.072001] Brought up 1 CPUs [ 0.072001] Total of 1 processors activated (3688.61 BogoMIPS). [ 0.072001] CPU0 attaching NULL sched-domain. [ 0.072001] Booting paravirtualized kernel on bare hardware [ 0.072001] regulator: core version 0.5 [ 0.072001] Time: 17:29:26 Date: 11/10/09 [ 0.072001] NET: Registered protocol family 16 [ 0.072001] EISA bus registered [ 0.072001] ACPI: bus type pci registered [ 0.104342] PCI: PCI BIOS revision 2.10 entry at 0xfb550, last bus=2 [ 0.104345] PCI: Using configuration type 1 for base access [ 0.105510] bio: create slab at 0 [ 0.106490] ACPI: EC: Look up EC in DSDT [ 0.113427] ACPI: Interpreter enabled [ 0.113433] ACPI: (supports S0 S1 S4 S5) [ 0.113460] ACPI: Using IOAPIC for interrupt routing [ 0.121952] ACPI: Power Resource [ISAV] (on) [ 0.122155] ACPI: No dock devices found. [ 0.122270] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.122323] pci 0000:00:00.0: reg 10 32bit mmio: [0xd0000000-0xd7ffffff] [ 0.122342] pci 0000:00:00.0: nForce2 C1 Halt Disconnect fixup [ 0.122570] pci 0000:00:01.1: reg 10 io port: [0xd000-0xd01f] [ 0.122608] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.122613] pci 0000:00:01.1: PME# disabled [ 0.122648] pci 0000:00:02.0: reg 10 32bit mmio: [0xe2081000-0xe2081fff] [ 0.122685] pci 0000:00:02.0: supports D1 D2 [ 0.122688] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.122693] pci 0000:00:02.0: PME# disabled [ 0.122722] pci 0000:00:02.1: reg 10 32bit mmio: [0xe2086000-0xe2086fff] [ 0.122759] pci 0000:00:02.1: supports D1 D2 [ 0.122762] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.122767] pci 0000:00:02.1: PME# disabled [ 0.122802] pci 0000:00:02.2: reg 10 32bit mmio: [0xe2087000-0xe20870ff] [ 0.122846] pci 0000:00:02.2: supports D1 D2 [ 0.122849] pci 0000:00:02.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.122854] pci 0000:00:02.2: PME# disabled [ 0.122890] pci 0000:00:04.0: reg 10 32bit mmio: [0xe2080000-0xe2080fff] [ 0.122897] pci 0000:00:04.0: reg 14 io port: [0xd400-0xd407] [ 0.122936] pci 0000:00:04.0: supports D1 D2 [ 0.122939] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.122944] pci 0000:00:04.0: PME# disabled [ 0.122972] pci 0000:00:05.0: reg 10 32bit mmio: [0xe2000000-0xe207ffff] [ 0.123010] pci 0000:00:05.0: supports D1 D2 [ 0.123038] pci 0000:00:06.0: reg 10 io port: [0xd800-0xd8ff] [ 0.123045] pci 0000:00:06.0: reg 14 io port: [0xdc00-0xdc7f] [ 0.123052] pci 0000:00:06.0: reg 18 32bit mmio: [0xe2082000-0xe2082fff] [ 0.123082] pci 0000:00:06.0: supports D1 D2 [ 0.123153] pci 0000:00:09.0: reg 20 io port: [0xf000-0xf00f] [ 0.123206] pci 0000:00:0d.0: reg 10 32bit mmio: [0xe2084000-0xe20847ff] [ 0.123213] pci 0000:00:0d.0: reg 14 32bit mmio: [0xe2085000-0xe208503f] [ 0.123247] pci 0000:00:0d.0: supports D1 D2 [ 0.123250] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.123254] pci 0000:00:0d.0: PME# disabled [ 0.123386] pci 0000:02:00.0: reg 10 32bit mmio: [0xe0000000-0xe0ffffff] [ 0.123394] pci 0000:02:00.0: reg 14 32bit mmio: [0xd8000000-0xdfffffff] [ 0.123415] pci 0000:02:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 0.123473] pci 0000:00:1e.0: bridge 32bit mmio: [0xe0000000-0xe1ffffff] [ 0.123478] pci 0000:00:1e.0: bridge 32bit mmio pref: [0xd8000000-0xdfffffff] [ 0.123490] pci_bus 0000:00: on NUMA node 0 [ 0.123495] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.123638] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.123778] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT] [ 0.182862] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.183029] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.183195] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.183362] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 10 11 *12 14 15) [ 0.183525] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.183692] ACPI: PCI Interrupt Link [LUBA] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.183857] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.184029] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.184197] ACPI: PCI Interrupt Link [LAPU] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.184366] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.184535] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.184702] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.184867] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 10 11 *12 14 15) [ 0.185036] ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.185203] ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.185374] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.185525] ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled. [ 0.185660] ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled. [ 0.185795] ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled. [ 0.185928] ACPI: PCI Interrupt Link [APC4] (IRQs *19) [ 0.186073] ACPI: PCI Interrupt Link [APCE] (IRQs *16), disabled. [ 0.186267] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0 [ 0.186461] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0 [ 0.186654] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0 [ 0.186852] ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0 [ 0.187045] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0 [ 0.187237] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled. [ 0.187371] ACPI: PCI Interrupt Link [APCS] (IRQs *23) [ 0.187562] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0 [ 0.187754] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0 [ 0.187946] ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled. [ 0.188158] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled. [ 0.188404] SCSI subsystem initialized [ 0.188504] libata version 3.00 loaded. [ 0.188610] usbcore: registered new interface driver usbfs [ 0.188637] usbcore: registered new interface driver hub [ 0.188674] usbcore: registered new device driver usb [ 0.188844] ACPI: WMI: Mapper loaded [ 0.188847] PCI: Using ACPI for IRQ routing [ 0.189014] Bluetooth: Core ver 2.15 [ 0.189051] NET: Registered protocol family 31 [ 0.189054] Bluetooth: HCI device and connection manager initialized [ 0.189058] Bluetooth: HCI socket layer initialized [ 0.189061] NetLabel: Initializing [ 0.189063] NetLabel: domain hash size = 128 [ 0.189065] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.189084] NetLabel: unlabeled traffic allowed by default [ 0.191680] pnp: PnP ACPI init [ 0.191706] ACPI: bus type pnp registered [ 0.197522] pnp: PnP ACPI: found 15 devices [ 0.197525] ACPI: ACPI bus type pnp unregistered [ 0.197530] PnPBIOS: Disabled by ACPI PNP [ 0.197545] system 00:00: ioport range 0x4000-0x407f has been reserved [ 0.197549] system 00:00: ioport range 0x4080-0x40ff has been reserved [ 0.197553] system 00:00: ioport range 0x4400-0x447f has been reserved [ 0.197557] system 00:00: ioport range 0x4480-0x44ff has been reserved [ 0.197560] system 00:00: ioport range 0x4200-0x427f has been reserved [ 0.197564] system 00:00: ioport range 0x4280-0x42ff has been reserved [ 0.197571] system 00:01: ioport range 0x5000-0x503f has been reserved [ 0.197575] system 00:01: ioport range 0x5100-0x513f has been reserved [ 0.197582] system 00:02: iomem range 0xd5800-0xd7fff has been reserved [ 0.197586] system 00:02: iomem range 0xf0000-0xf7fff could not be reserved [ 0.197590] system 00:02: iomem range 0xf8000-0xfbfff could not be reserved [ 0.197594] system 00:02: iomem range 0xfc000-0xfffff could not be reserved [ 0.197598] system 00:02: iomem range 0x3fff0000-0x3fffffff could not be reserved [ 0.197603] system 00:02: iomem range 0xffff0000-0xffffffff has been reserved [ 0.197607] system 00:02: iomem range 0x0-0x9ffff could not be reserved [ 0.197611] system 00:02: iomem range 0x100000-0x3ffeffff could not be reserved [ 0.197615] system 00:02: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.197619] system 00:02: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.197626] system 00:04: ioport range 0xb78-0xb7b has been reserved [ 0.197630] system 00:04: ioport range 0xf78-0xf7b has been reserved [ 0.197634] system 00:04: ioport range 0xa78-0xa7b has been reserved [ 0.197638] system 00:04: ioport range 0xe78-0xe7b has been reserved [ 0.197641] system 00:04: ioport range 0xbbc-0xbbf has been reserved [ 0.197645] system 00:04: ioport range 0xfbc-0xfbf has been reserved [ 0.197649] system 00:04: ioport range 0x4d0-0x4d1 has been reserved [ 0.197653] system 00:04: ioport range 0x294-0x297 has been reserved [ 0.232354] AppArmor: AppArmor Filesystem Enabled [ 0.232380] pci 0000:00:08.0: PCI bridge, secondary bus 0000:01 [ 0.232383] pci 0000:00:08.0: IO window: disabled [ 0.232389] pci 0000:00:08.0: MEM window: disabled [ 0.232394] pci 0000:00:08.0: PREFETCH window: disabled [ 0.232403] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02 [ 0.232405] pci 0000:00:1e.0: IO window: disabled [ 0.232411] pci 0000:00:1e.0: MEM window: 0xe0000000-0xe1ffffff [ 0.232416] pci 0000:00:1e.0: PREFETCH window: 0xd8000000-0xdfffffff [ 0.232429] pci 0000:00:08.0: setting latency timer to 64 [ 0.232439] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.232442] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.232446] pci_bus 0000:02: resource 1 mem: [0xe0000000-0xe1ffffff] [ 0.232450] pci_bus 0000:02: resource 2 pref mem [0xd8000000-0xdfffffff] [ 0.232497] NET: Registered protocol family 2 [ 0.232614] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.233097] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.234473] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.235158] TCP: Hash tables configured (established 131072 bind 65536) [ 0.235161] TCP reno registered [ 0.235290] NET: Registered protocol family 1 [ 0.235388] Trying to unpack rootfs image as initramfs... [ 0.479184] Freeing initrd memory: 7470k freed [ 0.488296] cpufreq-nforce2: Detected nForce2 chipset revision A2 [ 0.488300] cpufreq-nforce2: FSB changing is maybe unstable and can lead to crashes and data loss. [ 0.488313] cpufreq-nforce2: FSB currently at 160 MHz, FID 11.5 [ 0.488390] Scanning for low memory corruption every 60 seconds [ 0.488533] audit: initializing netlink socket (disabled) [ 0.488553] type=2000 audit(1257874166.487:1): initialized [ 0.498505] highmem bounce pool size: 64 pages [ 0.498516] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.500344] VFS: Disk quotas dquot_6.5.2 [ 0.500412] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.501046] fuse init (API version 7.12) [ 0.501143] msgmni has been set to 1732 [ 0.501394] alg: No test for stdrng (krng) [ 0.501410] io scheduler noop registered [ 0.501413] io scheduler anticipatory registered [ 0.501416] io scheduler deadline registered [ 0.501465] io scheduler cfq registered (default) [ 0.532043] pci 0000:02:00.0: Boot video device [ 0.532155] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.532183] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.532343] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.532349] ACPI: Power Button [PWRF] [ 0.532410] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1 [ 0.532414] ACPI: Sleep Button [SLPF] [ 0.532423] ACPI Error: Could not enable SleepButton event 20090521 evxfevnt-193 [ 0.532428] ACPI Warning: Could not enable fixed event 3 20090521 evxface-146 [ 0.532474] button: probe of LNXSLPBN:00 failed with error -22 [ 0.532520] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2 [ 0.532524] ACPI: Power Button [PWRB] [ 0.532580] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3 [ 0.532588] ACPI: Sleep Button [SLPB] [ 0.532653] fan PNP0C0B:00: registered as cooling_device0 [ 0.532659] ACPI: Fan [FAN] (on) [ 0.533080] processor LNXCPU:00: registered as cooling_device1 [ 0.537669] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.537678] ACPI: Thermal Zone [THRM] (28 C) [ 0.537739] isapnp: Scanning for PnP cards... [ 0.735985] Switched to high resolution mode on CPU 0 [ 0.892049] isapnp: No Plug & Play device found [ 0.893350] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.893488] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.893843] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.895084] brd: module loaded [ 0.895638] loop: module loaded [ 0.895743] input: Macintosh mouse button emulation as /devices/virtual/input/input4 [ 0.896068] pata_amd 0000:00:09.0: version 0.4.1 [ 0.896164] pata_amd 0000:00:09.0: power state changed by ACPI to D0 [ 0.896232] pata_amd 0000:00:09.0: setting latency timer to 64 [ 0.896353] scsi0 : pata_amd [ 0.896488] scsi1 : pata_amd [ 0.897530] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 0.897535] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 0.898354] Fixed MDIO Bus: probed [ 0.898400] PPP generic driver version 2.4.2 [ 0.898510] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.898853] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22 [ 0.898861] alloc irq_desc for 22 on node -1 [ 0.898864] alloc kstat_irqs on node -1 [ 0.898873] ehci_hcd 0000:00:02.2: PCI INT C -> Link[APCL] -> GSI 22 (level, high) -> IRQ 22 [ 0.898894] ehci_hcd 0000:00:02.2: setting latency timer to 64 [ 0.898899] ehci_hcd 0000:00:02.2: EHCI Host Controller [ 0.898977] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1 [ 0.899013] ehci_hcd 0000:00:02.2: selective suspend/wakeup unavailable [ 0.899022] ehci_hcd 0000:00:02.2: debug port 1 [ 0.899028] ehci_hcd 0000:00:02.2: cache line size of 64 is not supported [ 0.899048] ehci_hcd 0000:00:02.2: irq 22, io mem 0xe2087000 [ 0.908020] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00 [ 0.908131] usb usb1: configuration #1 chosen from 1 choice [ 0.908170] hub 1-0:1.0: USB hub found [ 0.908184] hub 1-0:1.0: 6 ports detected [ 0.908269] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.908619] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21 [ 0.908624] alloc irq_desc for 21 on node -1 [ 0.908626] alloc kstat_irqs on node -1 [ 0.908633] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 21 (level, high) -> IRQ 21 [ 0.908644] ohci_hcd 0000:00:02.0: setting latency timer to 64 [ 0.908649] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 0.908690] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 0.908719] ohci_hcd 0000:00:02.0: irq 21, io mem 0xe2081000 [ 0.966065] usb usb2: configuration #1 chosen from 1 choice [ 0.966099] hub 2-0:1.0: USB hub found [ 0.966113] hub 2-0:1.0: 3 ports detected [ 0.966494] ACPI: PCI Interrupt Link [APCG] enabled at IRQ 20 [ 0.966498] alloc irq_desc for 20 on node -1 [ 0.966501] alloc kstat_irqs on node -1 [ 0.966507] ohci_hcd 0000:00:02.1: PCI INT B -> Link[APCG] -> GSI 20 (level, high) -> IRQ 20 [ 0.966517] ohci_hcd 0000:00:02.1: setting latency timer to 64 [ 0.966521] ohci_hcd 0000:00:02.1: OHCI Host Controller [ 0.966561] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3 [ 0.966588] ohci_hcd 0000:00:02.1: irq 20, io mem 0xe2086000 [ 1.022062] usb usb3: configuration #1 chosen from 1 choice [ 1.022095] hub 3-0:1.0: USB hub found [ 1.022108] hub 3-0:1.0: 3 ports detected [ 1.022174] uhci_hcd: USB Universal Host Controller Interface driver [ 1.022279] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 1.022283] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 1.022622] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.022708] mice: PS/2 mouse device common for all mice [ 1.022840] rtc_cmos 00:06: RTC can wake from S4 [ 1.022889] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 1.022917] rtc0: alarms up to one year, y3k, 242 bytes nvram [ 1.023006] device-mapper: uevent: version 1.0.3 [ 1.023119] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 1.023226] device-mapper: multipath: version 1.1.0 loaded [ 1.023230] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1.023371] EISA: Probing bus 0 at eisa.0 [ 1.023395] Cannot allocate resource for EISA slot 4 [ 1.023398] Cannot allocate resource for EISA slot 5 [ 1.023414] EISA: Detected 0 cards. [ 1.023492] cpuidle: using governor ladder [ 1.023495] cpuidle: using governor menu [ 1.024109] TCP cubic registered [ 1.024299] NET: Registered protocol family 10 [ 1.024826] lo: Disabled Privacy Extensions [ 1.025217] NET: Registered protocol family 17 [ 1.025241] Bluetooth: L2CAP ver 2.13 [ 1.025243] Bluetooth: L2CAP socket layer initialized [ 1.025247] Bluetooth: SCO (Voice Link) ver 0.6 [ 1.025249] Bluetooth: SCO socket layer initialized [ 1.025288] Bluetooth: RFCOMM TTY layer initialized [ 1.025292] Bluetooth: RFCOMM socket layer initialized [ 1.025295] Bluetooth: RFCOMM ver 1.11 [ 1.025312] powernow-k8: Processor cpuid 6a0 not supported [ 1.025332] Using IPI No-Shortcut mode [ 1.025406] PM: Resume from disk failed. [ 1.025424] registered taskstats version 1 [ 1.025564] Magic number: 1:511:491 [ 1.025682] rtc_cmos 00:06: setting system clock to 2009-11-10 17:29:27 UTC (1257874167) [ 1.025687] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.025689] EDD information not available. [ 1.043590] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 [ 1.060519] ata1.00: ATA-7: Maxtor 6Y080L0, YAR41BW0, max UDMA/133 [ 1.060523] ata1.00: 160086528 sectors, multi 16: LBA [ 1.060552] ata1: nv_mode_filter: 0x7f39f&0x7f39f->0x7f39f, BIOS=0x7f000 (0xc700c000) ACPI=0x7f01f (15:600:0x13) [ 1.076438] ata1.00: configured for UDMA/133 [ 1.076595] scsi 0:0:0:0: Direct-Access ATA Maxtor 6Y080L0 YAR4 PQ: 0 ANSI: 5 [ 1.076752] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.076810] sd 0:0:0:0: [sda] 160086528 512-byte logical blocks: (81.9 GB/76.3 GiB) [ 1.076876] sd 0:0:0:0: [sda] Write Protect is off [ 1.076880] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.076914] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.077090] sda: sda1 sda2 < sda5 > [ 1.104946] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.240379] ata2.00: ATAPI: SAMSUNG CD-R/RW DRIVE SW-252F, R802, max UDMA/33 [ 1.240409] ata2: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc700c000) ACPI=0x701f (60:600:0x13) [ 1.256326] ata2.00: configured for UDMA/33 [ 1.257752] scsi 1:0:0:0: CD-ROM SAMSUNG CD-R/RW SW-252F R802 PQ: 0 ANSI: 5 [ 1.261536] sr0: scsi3-mmc drive: 52x/1x writer cd/rw xa/form2 cdda tray [ 1.261541] Uniform CD-ROM driver Revision: 3.20 [ 1.261629] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.261685] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.261715] Freeing unused kernel memory: 540k freed [ 1.262373] Write protecting the kernel text: 4568k [ 1.262412] Write protecting the kernel read-only data: 1840k [ 1.430947] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 1.431341] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22 [ 1.431349] forcedeth 0000:00:04.0: PCI INT A -> Link[APCH] -> GSI 22 (level, high) -> IRQ 22 [ 1.431356] forcedeth 0000:00:04.0: setting latency timer to 64 [ 1.431415] nv_probe: set workaround bit for reversed mac addr [ 1.464127] usb 2-2: new low speed USB device using ohci_hcd and address 2 [ 1.487800] Linux agpgart interface v0.103 [ 1.556798] Floppy drive(s): fd0 is 1.44M [ 1.576917] FDC 0 is a post-1991 82077 [ 1.720982] usb 2-2: configuration #1 chosen from 1 choice [ 1.731436] usbcore: registered new interface driver hiddev [ 1.739278] input: Microsoft Corporation Microsoft ® Laser Mouse 6000 as /devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.0/input/input6 [ 1.739384] generic-usb 0003:045E:00F0.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Corporation Microsoft ® Laser Mouse 6000] on usb-0000:00:02.0-2/input0 [ 1.739407] usbcore: registered new interface driver usbhid [ 1.739411] usbhid: v2.6:USB HID core driver [ 1.949139] forcedeth 0000:00:04.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:e0:4c:a4:4b:3b [ 1.949147] forcedeth 0000:00:04.0: timirq lnktim desc-v1 [ 1.949605] agpgart: Detected NVIDIA nForce2 chipset [ 1.958553] agpgart-nvidia 0000:00:00.0: AGP aperture is 128M @ 0xd0000000 [ 1.959157] ACPI: PCI Interrupt Link [APCM] enabled at IRQ 21 [ 1.959165] ohci1394 0000:00:0d.0: PCI INT A -> Link[APCM] -> GSI 21 (level, high) -> IRQ 21 [ 1.959172] ohci1394 0000:00:0d.0: setting latency timer to 64 [ 2.014022] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[e2084000-e20847ff] Max Packet=[2048] IR/IT contexts=[4/4] [ 2.954951] PM: Starting manual resume from disk [ 2.954957] PM: Resume from partition 8:5 [ 2.954959] PM: Checking hibernation image. [ 2.955177] PM: Resume from disk failed. [ 2.968792] EXT4-fs (sda1): barriers enabled [ 2.994249] kjournald2 starting: pid 372, dev sda1:8, commit interval 5 seconds [ 2.994266] EXT4-fs (sda1): delayed allocation enabled [ 2.994270] EXT4-fs: file extents enabled [ 3.006383] EXT4-fs: mballoc enabled [ 3.006402] EXT4-fs (sda1): mounted filesystem with ordered data mode [ 3.822958] type=1505 audit(1257874170.296:2): operation="profile_load" pid=395 name=/usr/share/gdm/guest-session/Xsession [ 3.826053] type=1505 audit(1257874170.298:3): operation="profile_load" pid=396 name=/sbin/dhclient3 [ 3.826414] type=1505 audit(1257874170.298:4): operation="profile_load" pid=396 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 3.826622] type=1505 audit(1257874170.298:5): operation="profile_load" pid=396 name=/usr/lib/connman/scripts/dhclient-script [ 3.867057] type=1505 audit(1257874170.338:6): operation="profile_load" pid=397 name=/usr/bin/evince [ 3.873296] type=1505 audit(1257874170.346:7): operation="profile_load" pid=397 name=/usr/bin/evince-previewer [ 3.877028] type=1505 audit(1257874170.350:8): operation="profile_load" pid=397 name=/usr/bin/evince-thumbnailer [ 3.896563] type=1505 audit(1257874170.370:9): operation="profile_load" pid=399 name=/usr/bin/freshclam [ 3.899114] type=1505 audit(1257874170.370:10): operation="profile_load" pid=400 name=/usr/sbin/clamd [ 16.816205] udev: starting version 147 [ 16.826391] Adding 3004112k swap on /dev/sda5. Priority:-1 extents:1 across:3004112k [ 16.860995] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x5000 [ 16.861024] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x5100 [ 17.082946] EXT4-fs (sda1): internal journal on sda1:8 [ 17.119909] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 17.256151] parport_pc 00:0b: reported by Plug and Play ACPI [ 17.256213] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 17.441693] parport0: Printer, HEWLETT-PACKARD DESKJET 950C [ 17.490656] nvidia: module license 'NVIDIA' taints kernel. [ 17.490662] Disabling lock debugging due to kernel taint [ 17.772567] lp0: using parport0 (interrupt-driven). [ 17.798297] ppdev: user-space parallel port driver [ 17.891050] gameport: NS558 PnP Gameport is pnp00:0d/gameport0, io 0x201, speed 59659kHz [ 18.001159] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 20 [ 18.001169] Intel ICH 0000:00:06.0: PCI INT A -> Link[APCJ] -> GSI 20 (level, high) -> IRQ 20 [ 18.001214] Intel ICH 0000:00:06.0: setting latency timer to 64 [ 18.005020] ip_tables: (C) 2000-2006 Netfilter Core Team [ 18.251506] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 [ 18.251515] alloc irq_desc for 19 on node -1 [ 18.251518] alloc kstat_irqs on node -1 [ 18.251529] nvidia 0000:02:00.0: PCI INT A -> Link[APC4] -> GSI 19 (level, high) -> IRQ 19 [ 18.252092] NVRM: loading NVIDIA UNIX x86 Kernel Module 173.14.20 Thu Jun 25 19:23:24 PDT 2009 [ 18.325030] intel8x0_measure_ac97_clock: measured 53734 usecs (2608 samples) [ 18.325036] intel8x0: clocking to 47470 [ 18.401114] __ratelimit: 9 callbacks suppressed [ 18.401120] type=1505 audit(1257874184.874:14): operation="profile_replace" pid=817 name=/usr/share/gdm/guest-session/Xsession [ 18.403512] type=1505 audit(1257874184.874:15): operation="profile_replace" pid=818 name=/sbin/dhclient3 [ 18.403881] type=1505 audit(1257874184.874:16): operation="profile_replace" pid=818 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 18.430470] type=1505 audit(1257874184.902:17): operation="profile_replace" pid=818 name=/usr/lib/connman/scripts/dhclient-script [ 18.471646] type=1505 audit(1257874184.942:18): operation="profile_replace" pid=822 name=/usr/bin/evince [ 18.541992] type=1505 audit(1257874185.014:19): operation="profile_replace" pid=822 name=/usr/bin/evince-previewer [ 18.582060] type=1505 audit(1257874185.054:20): operation="profile_replace" pid=822 name=/usr/bin/evince-thumbnailer [ 18.589618] type=1505 audit(1257874185.062:21): operation="profile_replace" pid=909 name=/usr/bin/freshclam [ 18.592098] type=1505 audit(1257874185.066:22): operation="profile_replace" pid=910 name=/usr/sbin/clamd [ 18.594630] type=1505 audit(1257874185.066:23): operation="profile_replace" pid=911 name=/usr/lib/cups/backend/cups-pdf [ 19.902641] agpgart-nvidia 0000:00:00.0: AGP 3.0 bridge [ 19.902658] agpgart-nvidia 0000:00:00.0: putting AGP V3 device into 8x mode [ 19.902720] nvidia 0000:02:00.0: putting AGP V3 device into 8x mode [ 29.124015] eth0: no IPv6 routers present [ 97.065924] ondemand governor failed, too long transition latency of HW, fallback to performance governor