[ 0.000000] Linux version 4.15.0-20-generic (buildd@lgw01-amd64-039) (gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)) #21-Ubuntu SMP Tue Apr 24 06:16:15 UTC 2018 (Ubuntu 4.15.0-20.21-generic 4.15.17) [ 0.000000] Command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/lubuntu.seed boot=casper quiet splash --- [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: x87 FPU will use FXSAVE [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009cfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000200fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020100000-0x0000000077b89fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000077b8a000-0x0000000077d89fff] type 20 [ 0.000000] BIOS-e820: [mem 0x0000000077d8a000-0x0000000079219fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007921a000-0x0000000079464fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000079465000-0x00000000794a4fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000794a5000-0x0000000079ffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.31 by Phoenix Technologies Ltd. [ 0.000000] efi: ACPI=0x794a4000 ACPI 2.0=0x794a4014 SMBIOS=0x79209000 [ 0.000000] secureboot: Secure boot could not be determined (mode 0) [ 0.000000] random: fast init done [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Intel Corporation Intel powered classmate PC/Intel powered classmate PC, BIOS MPBYT10A.17A.0030.2014.0906.1259 09/06/2014 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x7a000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect [ 0.000000] 1 base 000000000 mask F80000000 write-back [ 0.000000] 2 base 07C000000 mask FFC000000 uncachable [ 0.000000] 3 base 07A000000 mask FFE000000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ (ptrval)] 97000 size 24576 [ 0.000000] BRK [0x4213e000, 0x4213efff] PGTABLE [ 0.000000] BRK [0x4213f000, 0x4213ffff] PGTABLE [ 0.000000] BRK [0x42140000, 0x42140fff] PGTABLE [ 0.000000] BRK [0x42141000, 0x42141fff] PGTABLE [ 0.000000] BRK [0x42142000, 0x42142fff] PGTABLE [ 0.000000] BRK [0x42143000, 0x42143fff] PGTABLE [ 0.000000] BRK [0x42144000, 0x42144fff] PGTABLE [ 0.000000] BRK [0x42145000, 0x42145fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x3395f000-0x35ca6fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000794A4014 000024 (v02 PTEC ) [ 0.000000] ACPI: XSDT 0x00000000794A4170 0000CC (v01 PTEC OEMTABLE 00000002 PTEC 00000002) [ 0.000000] ACPI: FACP 0x00000000794A2000 00010C (v05 PTEC OEMTABLE 00000003 VLV2 0100000D) [ 0.000000] ACPI: DSDT 0x0000000079496000 007D6B (v02 PTEC OEMTABLE 00000003 VLV2 0100000D) [ 0.000000] ACPI: FACS 0x00000000793FD000 000040 [ 0.000000] ACPI: FACS 0x00000000793FD000 000040 [ 0.000000] ACPI: UEFI 0x00000000794A3000 000042 (v01 PTEC OEMTABLE 00000002 PTEC 00000002) [ 0.000000] ACPI: HPET 0x00000000794A1000 000038 (v01 PTEC OEMTABLE 00000003 VLV2 0100000D) [ 0.000000] ACPI: LPIT 0x00000000794A0000 000104 (v01 PTEC OEMTABLE 00000003 VLV2 0100000D) [ 0.000000] ACPI: APIC 0x000000007949F000 000084 (v03 PTEC OEMTABLE 00000003 VLV2 0100000D) [ 0.000000] ACPI: MCFG 0x000000007949E000 00003C (v01 PTEC OEMTABLE 00000003 VLV2 0100000D) [ 0.000000] ACPI: SSDT 0x0000000079495000 0005BD (v01 PTEC OEMTABLE 00000003 VLV2 0100000D) [ 0.000000] ACPI: SSDT 0x0000000079494000 000485 (v01 PTEC DptfTab 00000003 VLV2 0100000D) [ 0.000000] ACPI: SSDT 0x0000000079493000 000058 (v01 PTEC LowPwrM 00000003 VLV2 0100000D) [ 0.000000] ACPI: SSDT 0x0000000079492000 000763 (v01 PmRef CpuPm 00003000 INTL 20120711) [ 0.000000] ACPI: SSDT 0x0000000079491000 000290 (v01 PmRef Cpu0Tst 00003000 INTL 20120711) [ 0.000000] ACPI: SSDT 0x0000000079490000 00017A (v01 PmRef ApTst 00003000 INTL 20120711) [ 0.000000] ACPI: UEFI 0x000000007948F000 000042 (v01 PTEC OEMTABLE 00000002 PTEC 00000002) [ 0.000000] ACPI: TCPA 0x000000007948E000 000032 (v02 PTL CRESTLN 06040000 00005A52) [ 0.000000] ACPI: SSDT 0x000000007948D000 000589 (v01 Intel_ TpmTable 00001000 INTL 20120711) [ 0.000000] ACPI: POAT 0x00000000793F4000 000055 (v03 PTEC OEMTABLE 00000002 PTEC 00000002) [ 0.000000] ACPI: BATB 0x000000007948C000 000046 (v01 PTEC OEMTABLE 00000002 PTEC 00000002) [ 0.000000] ACPI: FPDT 0x000000007948B000 000064 (v01 PTEC OEMTABLE 00000002 PTEC 00000002) [ 0.000000] ACPI: WPBT 0x0000000079482000 000038 (v01 ABT-NT ABT-WPBT 00000001 ABTW 20120402) [ 0.000000] ACPI: UEFI 0x0000000079481000 00012A (v01 PTEC OEMTABLE 00000002 PTEC 00000002) [ 0.000000] ACPI: BGRT 0x0000000079480000 000038 (v01 PTEC OEMTABLE 00000002 PTEC 00000002) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000079ffffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x777bb000-0x777e5fff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x0000000079ffffff] [ 0.000000] Normal empty [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff] [ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009cfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000001fffffff] [ 0.000000] node 0: [mem 0x0000000020100000-0x0000000077b89fff] [ 0.000000] node 0: [mem 0x00000000794a5000-0x0000000079ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000079ffffff] [ 0.000000] On node 0 totalpages: 492928 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 22 pages reserved [ 0.000000] DMA zone: 3995 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7744 pages used for memmap [ 0.000000] DMA32 zone: 488933 pages, LIFO batch:31 [ 0.000000] Reserved but unavailable: 98 pages [ 0.000000] x86/hpet: Will disable the HPET for this platform because it's not reliable [ 0.000000] Reserving Intel graphics memory at 0x000000007b000000-0x000000007effffff [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-86 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x200fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x77b8a000-0x77d89fff] [ 0.000000] PM: Registered nosave memory: [mem 0x77d8a000-0x79219fff] [ 0.000000] PM: Registered nosave memory: [mem 0x7921a000-0x79464fff] [ 0.000000] PM: Registered nosave memory: [mem 0x79465000-0x794a4fff] [ 0.000000] e820: [mem 0x7f000000-0xe00f7fff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u524288 [ 0.000000] pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 485098 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/lubuntu.seed boot=casper quiet splash --- [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 1803600K/1971712K available (12300K kernel code, 2470K rwdata, 4240K rodata, 2404K init, 2416K bss, 168112K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Kernel/User page tables isolation: enabled [ 0.000000] ftrace: allocating 39065 entries in 153 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] ACPI: Core revision 20170831 [ 0.000000] ACPI: 8 ACPI AML tables successfully acquired and loaded [ 0.004000] APIC: Switch to symmetric I/O mode setup [ 0.004000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.024000] tsc: Detected 1466.300 MHz processor [ 0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 2932.60 BogoMIPS (lpj=5865200) [ 0.024000] pid_max: default: 32768 minimum: 301 [ 0.024000] Security Framework initialized [ 0.024000] Yama: becoming mindful. [ 0.024000] AppArmor: AppArmor initialized [ 0.024000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.024000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.024000] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.024000] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.028407] CPU: Physical Processor ID: 0 [ 0.028410] CPU: Processor Core ID: 0 [ 0.028420] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.028422] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.028437] mce: CPU supports 6 MCE banks [ 0.028449] CPU0: Thermal monitoring enabled (TM1) [ 0.028455] process: using mwait in idle threads [ 0.028463] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0 [ 0.028465] Last level dTLB entries: 4KB 128, 2MB 16, 4MB 16, 1GB 0 [ 0.028469] Spectre V2 : Mitigation: Full generic retpoline [ 0.028829] Freeing SMP alternatives memory: 36K [ 0.038606] TSC deadline timer enabled [ 0.038612] smpboot: CPU0: Intel(R) Celeron(R) CPU N2805 @ 1.46GHz (family: 0x6, model: 0x37, stepping: 0x3) [ 0.038871] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, 8-deep LBR, full-width counters, Intel PMU driver. [ 0.038900] ... version: 3 [ 0.038902] ... bit width: 40 [ 0.038904] ... generic registers: 2 [ 0.038906] ... value mask: 000000ffffffffff [ 0.038907] ... max period: 0000007fffffffff [ 0.038909] ... fixed-purpose events: 3 [ 0.038910] ... event mask: 0000000700000003 [ 0.039018] Hierarchical SRCU implementation. [ 0.040000] smp: Bringing up secondary CPUs ... [ 0.040000] x86: Booting SMP configuration: [ 0.040000] .... node #0, CPUs: #1 [ 0.040000] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.040000] smp: Brought up 1 node, 2 CPUs [ 0.040000] smpboot: Max logical packages: 2 [ 0.040000] smpboot: Total of 2 processors activated (5865.20 BogoMIPS) [ 0.040353] devtmpfs: initialized [ 0.040353] x86/mm: Memory block size: 128MB [ 0.040960] evm: security.selinux [ 0.040962] evm: security.SMACK64 [ 0.040964] evm: security.SMACK64EXEC [ 0.040965] evm: security.SMACK64TRANSMUTE [ 0.040966] evm: security.SMACK64MMAP [ 0.040968] evm: security.apparmor [ 0.040969] evm: security.ima [ 0.040971] evm: security.capability [ 0.041054] PM: Registering ACPI NVS region [mem 0x00058000-0x00058fff] (4096 bytes) [ 0.041054] PM: Registering ACPI NVS region [mem 0x7921a000-0x79464fff] (2404352 bytes) [ 0.041054] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.041054] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.041054] pinctrl core: initialized pinctrl subsystem [ 0.041054] RTC time: 0:48:23, date: 05/06/20 [ 0.041054] NET: Registered protocol family 16 [ 0.041054] audit: initializing netlink subsys (disabled) [ 0.041054] audit: type=2000 audit(1588726103.040:1): state=initialized audit_enabled=0 res=1 [ 0.041054] cpuidle: using governor ladder [ 0.041054] cpuidle: using governor menu [ 0.041054] ACPI: bus type PCI registered [ 0.041054] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.041054] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) [ 0.041054] PCI: not using MMCONFIG [ 0.041054] PCI: Using configuration type 1 for base access [ 0.048040] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.048262] ACPI: Added _OSI(Module Device) [ 0.048264] ACPI: Added _OSI(Processor Device) [ 0.048267] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.048269] ACPI: Added _OSI(Processor Aggregator Device) [ 0.068930] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.071124] ACPI: Dynamic OEM Table Load: [ 0.071146] ACPI: SSDT 0xFFFF94EC30A6E400 000353 (v01 PmRef Cpu0Ist 00003000 INTL 20120711) [ 0.072215] ACPI: Dynamic OEM Table Load: [ 0.072234] ACPI: SSDT 0xFFFF94EC30A77000 000433 (v01 PmRef Cpu0Cst 00003001 INTL 20120711) [ 0.074515] ACPI: Dynamic OEM Table Load: [ 0.074533] ACPI: SSDT 0xFFFF94EC30ADD000 00015F (v01 PmRef ApIst 00003000 INTL 20120711) [ 0.075444] ACPI: Dynamic OEM Table Load: [ 0.075461] ACPI: SSDT 0xFFFF94EC30B28E40 00008D (v01 PmRef ApCst 00003000 INTL 20120711) [ 0.077262] ACPI: EC: EC started [ 0.077264] ACPI: EC: interrupt blocked [ 0.552132] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC [ 0.552138] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x18, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.552143] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions [ 0.552145] ACPI: Interpreter enabled [ 0.552214] ACPI: (supports S0 S3 S4 S5) [ 0.552217] ACPI: Using IOAPIC for interrupt routing [ 0.552337] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) [ 0.553974] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in ACPI motherboard resources [ 0.554000] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.555133] ACPI: Enabled 7 GPEs in block 00 to 3F [ 0.566638] ACPI: Power Resource [USBC] (on) [ 0.587914] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.587930] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.588166] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM [ 0.588210] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ 0.589699] PCI host bridge to bus 0000:00 [ 0.589706] pci_bus 0000:00: root bus resource [io 0x0070-0x0077] [ 0.589711] pci_bus 0000:00: root bus resource [io 0x0000-0x006f window] [ 0.589715] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7 window] [ 0.589719] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.589723] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.589727] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window] [ 0.589730] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window] [ 0.589734] pci_bus 0000:00: root bus resource [mem 0x80000000-0x909ffffe window] [ 0.589739] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.589756] pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000 [ 0.590065] pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000 [ 0.590086] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x903fffff] [ 0.590101] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff pref] [ 0.590115] pci 0000:00:02.0: reg 0x20: [io 0x3050-0x3057] [ 0.590145] pci 0000:00:02.0: BAR 2: assigned to efifb [ 0.590437] pci 0000:00:13.0: [8086:0f23] type 00 class 0x010601 [ 0.590465] pci 0000:00:13.0: reg 0x10: [io 0x3048-0x304f] [ 0.590477] pci 0000:00:13.0: reg 0x14: [io 0x305c-0x305f] [ 0.590489] pci 0000:00:13.0: reg 0x18: [io 0x3040-0x3047] [ 0.590500] pci 0000:00:13.0: reg 0x1c: [io 0x3058-0x305b] [ 0.590512] pci 0000:00:13.0: reg 0x20: [io 0x3020-0x303f] [ 0.590524] pci 0000:00:13.0: reg 0x24: [mem 0x90914000-0x909147ff] [ 0.590586] pci 0000:00:13.0: PME# supported from D3hot [ 0.590841] pci 0000:00:14.0: [8086:0f35] type 00 class 0x0c0330 [ 0.590869] pci 0000:00:14.0: reg 0x10: [mem 0x90900000-0x9090ffff 64bit] [ 0.590949] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.591216] pci 0000:00:1a.0: [8086:0f18] type 00 class 0x108000 [ 0.591252] pci 0000:00:1a.0: reg 0x10: [mem 0x90800000-0x908fffff] [ 0.591267] pci 0000:00:1a.0: reg 0x14: [mem 0x90700000-0x907fffff] [ 0.591389] pci 0000:00:1a.0: PME# supported from D0 D3hot [ 0.591645] pci 0000:00:1b.0: [8086:0f04] type 00 class 0x040300 [ 0.591677] pci 0000:00:1b.0: reg 0x10: [mem 0x90910000-0x90913fff 64bit] [ 0.591768] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.592020] pci 0000:00:1c.0: [8086:0f48] type 01 class 0x060400 [ 0.592111] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.592374] pci 0000:00:1c.1: [8086:0f4a] type 01 class 0x060400 [ 0.592464] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.592737] pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100 [ 0.593080] pci 0000:00:1f.3: [8086:0f12] type 00 class 0x0c0500 [ 0.593129] pci 0000:00:1f.3: reg 0x10: [mem 0x90914800-0x9091481f] [ 0.593205] pci 0000:00:1f.3: reg 0x20: [io 0x3000-0x301f] [ 0.593697] pci 0000:01:00.0: [10ec:b723] type 00 class 0x028000 [ 0.593754] pci 0000:01:00.0: reg 0x10: [io 0x2000-0x20ff] [ 0.593803] pci 0000:01:00.0: reg 0x18: [mem 0x90600000-0x90603fff 64bit] [ 0.593995] pci 0000:01:00.0: supports D1 D2 [ 0.593999] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.604055] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.604062] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.604068] pci 0000:00:1c.0: bridge window [mem 0x90600000-0x906fffff] [ 0.604219] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 0.604254] pci 0000:02:00.0: reg 0x10: [io 0x1000-0x10ff] [ 0.604286] pci 0000:02:00.0: reg 0x18: [mem 0x90500000-0x90500fff 64bit] [ 0.604308] pci 0000:02:00.0: reg 0x20: [mem 0x90400000-0x90403fff 64bit pref] [ 0.604424] pci 0000:02:00.0: supports D1 D2 [ 0.604428] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.616033] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 0.616040] pci 0000:00:1c.1: bridge window [io 0x1000-0x1fff] [ 0.616046] pci 0000:00:1c.1: bridge window [mem 0x90500000-0x905fffff] [ 0.616053] pci 0000:00:1c.1: bridge window [mem 0x90400000-0x904fffff 64bit pref] [ 0.618827] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.619179] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.619528] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.619876] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.620236] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.620586] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.620936] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.621285] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.624842] ACPI: EC: interrupt unblocked [ 0.624862] ACPI: EC: event unblocked [ 0.624875] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x18, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.624879] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events [ 0.625568] SCSI subsystem initialized [ 0.625613] libata version 3.00 loaded. [ 0.625613] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.625613] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.625613] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.625613] vgaarb: loaded [ 0.625613] ACPI: bus type USB registered [ 0.625613] usbcore: registered new interface driver usbfs [ 0.625613] usbcore: registered new interface driver hub [ 0.625613] usbcore: registered new device driver usb [ 0.625613] EDAC MC: Ver: 3.0.0 [ 0.625613] Registered efivars operations [ 0.636749] PCI: Using ACPI for IRQ routing [ 0.641617] PCI: pci_cache_line_size set to 64 bytes [ 0.641677] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ 0.641681] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff] [ 0.641683] e820: reserve RAM buffer [mem 0x77b8a000-0x77ffffff] [ 0.641686] e820: reserve RAM buffer [mem 0x7a000000-0x7bffffff] [ 0.641939] NetLabel: Initializing [ 0.641942] NetLabel: domain hash size = 128 [ 0.641944] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.641980] NetLabel: unlabeled traffic allowed by default [ 0.642032] clocksource: Switched to clocksource refined-jiffies [ 0.675520] VFS: Disk quotas dquot_6.6.0 [ 0.675566] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.675842] AppArmor: AppArmor Filesystem Enabled [ 0.675928] pnp: PnP ACPI init [ 0.676101] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.676571] pnp 00:01: disabling [io 0x164e-0x164f] because it overlaps 0000:00:1c.1 BAR 13 [io 0x1000-0x1fff] [ 0.676652] system 00:01: [io 0x0680-0x069f] has been reserved [ 0.676658] system 00:01: [io 0x0400-0x047f] has been reserved [ 0.676662] system 00:01: [io 0x0500-0x05fe] has been reserved [ 0.676666] system 00:01: [io 0x0600-0x061f] has been reserved [ 0.676681] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.677064] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.677185] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.677304] pnp 00:04: Plug and Play ACPI device, IDs ETD2001 PNP0f13 (active) [ 0.678472] system 00:05: [mem 0xe0000000-0xefffffff] could not be reserved [ 0.678479] system 00:05: [mem 0xfed01000-0xfed01fff] has been reserved [ 0.678483] system 00:05: [mem 0xfed03000-0xfed03fff] has been reserved [ 0.678488] system 00:05: [mem 0xfed04000-0xfed04fff] has been reserved [ 0.678493] system 00:05: [mem 0xfed0c000-0xfed0ffff] has been reserved [ 0.678497] system 00:05: [mem 0xfed08000-0xfed08fff] has been reserved [ 0.678502] system 00:05: [mem 0xfed1c000-0xfed1cfff] has been reserved [ 0.678506] system 00:05: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.678511] system 00:05: [mem 0xfef00000-0xfeffffff] has been reserved [ 0.678524] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.681422] pnp 00:06: Plug and Play ACPI device, IDs WEC1000 PNP0c31 (active) [ 0.681459] pnp: PnP ACPI: found 7 devices [ 0.691030] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.691060] clocksource: Switched to clocksource acpi_pm [ 0.691089] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000 [ 0.691119] pci 0000:00:1c.0: BAR 15: no space for [mem size 0x00200000 64bit pref] [ 0.691124] pci 0000:00:1c.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref] [ 0.691136] pci 0000:00:1c.0: BAR 15: no space for [mem size 0x00200000 64bit pref] [ 0.691140] pci 0000:00:1c.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref] [ 0.691146] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.691152] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.691159] pci 0000:00:1c.0: bridge window [mem 0x90600000-0x906fffff] [ 0.691170] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 0.691175] pci 0000:00:1c.1: bridge window [io 0x1000-0x1fff] [ 0.691181] pci 0000:00:1c.1: bridge window [mem 0x90500000-0x905fffff] [ 0.691187] pci 0000:00:1c.1: bridge window [mem 0x90400000-0x904fffff 64bit pref] [ 0.691195] pci_bus 0000:00: resource 4 [io 0x0070-0x0077] [ 0.691200] pci_bus 0000:00: resource 5 [io 0x0000-0x006f window] [ 0.691204] pci_bus 0000:00: resource 6 [io 0x0078-0x0cf7 window] [ 0.691207] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 0.691211] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window] [ 0.691215] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window] [ 0.691219] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window] [ 0.691223] pci_bus 0000:00: resource 11 [mem 0x80000000-0x909ffffe window] [ 0.691227] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] [ 0.691231] pci_bus 0000:01: resource 1 [mem 0x90600000-0x906fffff] [ 0.691235] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff] [ 0.691239] pci_bus 0000:02: resource 1 [mem 0x90500000-0x905fffff] [ 0.691243] pci_bus 0000:02: resource 2 [mem 0x90400000-0x904fffff 64bit pref] [ 0.691554] NET: Registered protocol family 2 [ 0.691770] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.691770] TCP bind hash table entries: 16384 (order: 6, 262144 bytes) [ 0.691770] TCP: Hash tables configured (established 16384 bind 16384) [ 0.691770] UDP hash table entries: 1024 (order: 3, 32768 bytes) [ 0.691770] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [ 0.691770] NET: Registered protocol family 1 [ 0.691770] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.691770] PCI: CLS 64 bytes, default 64 [ 0.691770] Unpacking initramfs... [ 18.917895] Freeing initrd memory: 36128K [ 18.918055] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1522c79555f, max_idle_ns: 440795265300 ns [ 18.918110] clocksource: Switched to clocksource tsc [ 18.918268] Scanning for low memory corruption every 60 seconds [ 18.919834] Initialise system trusted keyrings [ 18.919857] Key type blacklist registered [ 18.919947] workingset: timestamp_bits=36 max_order=19 bucket_order=0 [ 18.923454] zbud: loaded [ 18.924729] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 18.925178] fuse init (API version 7.26) [ 18.929031] Key type asymmetric registered [ 18.929035] Asymmetric key parser 'x509' registered [ 18.929143] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 18.929226] io scheduler noop registered [ 18.929229] io scheduler deadline registered [ 18.929359] io scheduler cfq registered (default) [ 18.930485] efifb: probing for efifb [ 18.930511] efifb: framebuffer at 0x80000000, using 4160k, total 4160k [ 18.930514] efifb: mode is 1366x768x32, linelength=5504, pages=1 [ 18.930515] efifb: scrolling: redraw [ 18.930519] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 18.940354] Console: switching to colour frame buffer device 170x48 [ 18.949933] fb0: EFI VGA frame buffer device [ 18.949995] intel_idle: MWAIT substates: 0x33000020 [ 18.949999] intel_idle: v0.4.1 model 0x37 [ 18.950205] intel_idle: lapic_timer_reliable_states 0xffffffff [ 18.950533] ACPI: AC Adapter [AC0] (on-line) [ 18.950688] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/PNP0C0D:00/input/input0 [ 18.950706] ACPI: Lid Switch [LID] [ 18.950814] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 18.950868] ACPI: Power Button [PWRB] [ 18.950965] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 [ 18.950992] ACPI: Sleep Button [SLPB] [ 18.951095] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 18.951136] ACPI: Power Button [PWRF] [ 18.962426] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 18.962898] thermal LNXTHERM:00: registered as thermal_zone0 [ 18.962901] ACPI: Thermal Zone [TZ01] (16 C) [ 18.963332] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 18.983838] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 18.991017] hpet: number irqs doesn't agree with number of timers [ 18.991155] Linux agpgart interface v0.103 [ 19.002053] tpm_tis 00:06: 1.2 TPM (device-id 0xFE, rev-id 71) [ 19.055243] loop: module loaded [ 19.055756] libphy: Fixed MDIO Bus: probed [ 19.055759] tun: Universal TUN/TAP device driver, 1.6 [ 19.056098] PPP generic driver version 2.4.2 [ 19.056349] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 19.056357] ehci-pci: EHCI PCI platform driver [ 19.056400] ehci-platform: EHCI generic platform driver [ 19.056433] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 19.056440] ohci-pci: OHCI PCI platform driver [ 19.056462] ohci-platform: OHCI generic platform driver [ 19.056482] uhci_hcd: USB Universal Host Controller Interface driver [ 19.056919] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 19.056939] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 19.058055] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810 [ 19.058063] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 19.058351] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 19.058356] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 19.058360] usb usb1: Product: xHCI Host Controller [ 19.058363] usb usb1: Manufacturer: Linux 4.15.0-20-generic xhci-hcd [ 19.058366] usb usb1: SerialNumber: 0000:00:14.0 [ 19.058858] hub 1-0:1.0: USB hub found [ 19.058882] hub 1-0:1.0: 6 ports detected [ 19.060047] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 19.060058] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 19.060171] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 19.060175] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 19.060179] usb usb2: Product: xHCI Host Controller [ 19.060182] usb usb2: Manufacturer: Linux 4.15.0-20-generic xhci-hcd [ 19.060185] usb usb2: SerialNumber: 0000:00:14.0 [ 19.060683] hub 2-0:1.0: USB hub found [ 19.060744] hub 2-0:1.0: 1 port detected [ 19.061461] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 19.064285] i8042: Detected active multiplexing controller, rev 1.1 [ 19.065478] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 19.065490] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 19.065568] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 19.065639] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 19.065712] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 19.066197] mousedev: PS/2 mouse device common for all mice [ 19.067855] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0 [ 19.067891] rtc_cmos 00:00: alarms up to one month, y3k, 242 bytes nvram [ 19.067913] i2c /dev entries driver [ 19.068071] device-mapper: uevent: version 1.0.3 [ 19.068250] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com [ 19.068260] intel_pstate: Intel P-state driver initializing [ 19.068736] ledtrig-cpu: registered to indicate activity on CPUs [ 19.068742] EFI Variables Facility v0.08 2004-May-17 [ 19.089855] NET: Registered protocol family 10 [ 19.101595] Segment Routing with IPv6 [ 19.101655] NET: Registered protocol family 17 [ 19.101891] Key type dns_resolver registered [ 19.102441] RAS: Correctable Errors collector initialized. [ 19.102519] microcode: sig=0x30673, pf=0x8, revision=0x320 [ 19.102624] microcode: Microcode Update Driver: v2.2. [ 19.102649] sched_clock: Marking stable (19102610706, 0)->(19089863020, 12747686) [ 19.103072] registered taskstats version 1 [ 19.103094] Loading compiled-in X.509 certificates [ 19.105050] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 19.111369] Loaded X.509 cert 'Build time autogenerated kernel key: f4ad6a5babf67650e4ceb385fa5dda8e4a178208' [ 19.118277] Problem loading UEFI:db X.509 certificate (-22) [ 19.118466] Loaded UEFI:db cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' linked to secondary sys keyring [ 19.118536] Loaded UEFI:db cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' linked to secondary sys keyring [ 19.119874] Loaded UEFI:MokListRT cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' linked to secondary sys keyring [ 19.120453] zswap: loaded using pool lzo/zbud [ 19.131006] Key type big_key registered [ 19.131017] Key type trusted registered [ 19.135986] Key type encrypted registered [ 19.135994] AppArmor: AppArmor sha1 policy hashing enabled [ 19.249214] evm: HMAC attrs: 0x1 [ 19.249828] Magic number: 4:228:809 [ 19.250077] rtc_cmos 00:00: setting system clock to 2020-05-06 00:48:42 UTC (1588726122) [ 19.250260] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 19.250262] EDD information not available. [ 19.272661] ACPI: Battery Slot [BAT1] (battery present) [ 19.303158] Freeing unused kernel memory: 2404K [ 19.303163] Write protecting the kernel read-only data: 20480k [ 19.305117] Freeing unused kernel memory: 2008K [ 19.319014] Freeing unused kernel memory: 1904K [ 19.345373] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 19.345375] x86/mm: Checking user space page tables [ 19.371216] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 19.408168] usb 1-1: new high-speed USB device number 2 using xhci_hcd [ 19.558415] usb 1-1: New USB device found, idVendor=0951, idProduct=1642 [ 19.558421] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 19.558425] usb 1-1: Product: DT 101 G2 [ 19.558428] usb 1-1: Manufacturer: Kingston [ 19.558432] usb 1-1: SerialNumber: 001D60EDDBF4FC3031D836A8 [ 19.600147] usb-storage 1-1:1.0: USB Mass Storage device detected [ 19.600407] scsi host0: usb-storage 1-1:1.0 [ 19.601622] usbcore: registered new interface driver usb-storage [ 19.606511] usbcore: registered new interface driver uas [ 19.684064] usb 1-3: new high-speed USB device number 3 using xhci_hcd [ 19.762086] ahci 0000:00:13.0: version 3.0 [ 19.762440] ahci 0000:00:13.0: controller can't do DEVSLP, turning off [ 19.762558] ahci 0000:00:13.0: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x1 impl SATA mode [ 19.762565] ahci 0000:00:13.0: flags: 64bit ncq pm led clo pio slum part deso [ 19.766712] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 19.766733] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control [ 19.767740] r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0x00000000d82faa14, c0:3f:d5:26:70:3f, XID 0c900880 IRQ 89 [ 19.767746] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 19.771984] scsi host1: ahci [ 19.784294] scsi host2: ahci [ 19.784463] ata1: SATA max UDMA/133 abar m2048@0x90914000 port 0x90914100 irq 88 [ 19.784466] ata2: DUMMY [ 19.862410] [drm] Memory usable by graphics device = 2048M [ 19.862417] checking generic (80000000 410000) vs hw (80000000 10000000) [ 19.862419] fb: switching to inteldrmfb from EFI VGA [ 19.862473] Console: switching to colour dummy device 80x25 [ 19.862674] [drm] Replacing VGA console driver [ 19.862843] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 19.862846] [drm] Driver supports precise vblank timestamp query. [ 19.864473] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 19.865304] usb 1-3: New USB device found, idVendor=05e3, idProduct=0608 [ 19.865309] usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 19.865313] usb 1-3: Product: USB2.0 Hub [ 19.865970] hub 1-3:1.0: USB hub found [ 19.866221] hub 1-3:1.0: 4 ports detected [ 19.866802] usb: port power management may be unreliable [ 19.898134] r8169 0000:02:00.0 enp2s0: renamed from eth0 [ 19.905235] [drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0 [ 19.908507] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 19.909418] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input13 [ 19.920537] fbcon: inteldrmfb (fb0) is primary device [ 20.097292] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 20.135504] ata1.00: ATA-8: ST320LT012-1DG14C, 0001SDM1, max UDMA/133 [ 20.135516] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 20.160298] usb 1-3.1: new high-speed USB device number 4 using xhci_hcd [ 20.378424] usb 1-3.1: New USB device found, idVendor=04f2, idProduct=b445 [ 20.378429] usb 1-3.1: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 20.378432] usb 1-3.1: Product: USB 2.0 Camera [ 20.378436] usb 1-3.1: Manufacturer: Chicony Electronics Co.,Ltd. [ 20.378438] usb 1-3.1: SerialNumber: 0x0001 [ 20.385830] psmouse serio4: elantech: assuming hardware version 3 (with firmware version 0x354f01) [ 20.399822] psmouse serio4: elantech: Synaptics capabilities query result 0x39, 0x16, 0x09. [ 20.415120] psmouse serio4: elantech: Elan sample query result 01, 74, 96 [ 20.415130] psmouse serio4: elantech: absolute mode broken, forcing standard PS/2 protocol [ 20.464476] usb 1-3.3: new full-speed USB device number 5 using xhci_hcd [ 20.486435] ata1.00: configured for UDMA/133 [ 20.487109] scsi 1:0:0:0: Direct-Access ATA ST320LT012-1DG14 SDM1 PQ: 0 ANSI: 5 [ 20.488026] sd 1:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 20.488031] sd 1:0:0:0: [sda] 4096-byte physical blocks [ 20.488071] sd 1:0:0:0: [sda] Write Protect is off [ 20.488075] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 20.488147] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 20.488238] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 20.535023] sda: sda1 sda2 sda3 [ 20.536428] sd 1:0:0:0: [sda] Attached SCSI disk [ 20.568757] usb 1-3.3: New USB device found, idVendor=0bda, idProduct=b723 [ 20.568762] usb 1-3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 20.568765] usb 1-3.3: Product: Bluetooth Radio [ 20.568768] usb 1-3.3: Manufacturer: Realtek [ 20.568771] usb 1-3.3: SerialNumber: 00e04c000001 [ 20.615577] scsi 0:0:0:0: Direct-Access Kingston DT 101 G2 1.00 PQ: 0 ANSI: 0 CCS [ 20.616450] sd 0:0:0:0: Attached scsi generic sg1 type 0 [ 20.616550] sd 0:0:0:0: [sdb] 7831552 512-byte logical blocks: (4.01 GB/3.73 GiB) [ 20.616729] sd 0:0:0:0: [sdb] Write Protect is off [ 20.616734] sd 0:0:0:0: [sdb] Mode Sense: 0b 00 00 08 [ 20.616914] sd 0:0:0:0: [sdb] No Caching mode page found [ 20.616918] sd 0:0:0:0: [sdb] Assuming drive cache: write through [ 20.627301] sdb: sdb1 [ 20.628471] sd 0:0:0:0: [sdb] Attached SCSI removable disk [ 20.648131] usb 1-3.4: new high-speed USB device number 6 using xhci_hcd [ 20.713737] input: ImPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input12 [ 20.748648] usb 1-3.4: New USB device found, idVendor=0bda, idProduct=0129 [ 20.748652] usb 1-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 20.748656] usb 1-3.4: Product: USB2.0-CRW [ 20.748659] usb 1-3.4: Manufacturer: Generic [ 20.748662] usb 1-3.4: SerialNumber: 20100201396000000 [ 20.756929] usbcore: registered new interface driver rtsx_usb [ 21.150205] Console: switching to colour frame buffer device 170x48 [ 21.176979] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 22.898558] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 23.159049] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) [ 23.803118] random: crng init done [ 41.437447] ip_tables: (C) 2000-2006 Netfilter Core Team [ 41.500809] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 41.520756] systemd[1]: Detected architecture x86-64. [ 41.525558] systemd[1]: Set hostname to . [ 41.526083] systemd[1]: Initializing machine ID from random generator. [ 41.834927] systemd[1]: Reached target Swap. [ 41.835323] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 41.835952] systemd[1]: Created slice User and Session Slice. [ 41.836607] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 41.836673] systemd[1]: Reached target Remote File Systems. [ 41.836712] systemd[1]: Reached target User and Group Name Lookups. [ 42.159227] lp: driver loaded but no devices found [ 42.187173] ppdev: user-space parallel port driver [ 42.472643] systemd-journald[955]: Received request to flush runtime journal from PID 1 [ 43.838015] zram: Added device: zram0 [ 43.838311] zram: Added device: zram1 [ 44.129339] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 44.141340] zram0: detected capacity change from 0 to 490496000 [ 44.228150] input: cmpc_keys as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/FNBT0000:00/input/input14 [ 44.597505] Adding 478996k swap on /dev/zram0. Priority:5 extents:1 across:478996k SSFS [ 44.626533] zram1: detected capacity change from 0 to 490496000 [ 44.713219] Adding 478996k swap on /dev/zram1. Priority:5 extents:1 across:478996k SSFS [ 45.262818] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 45.414181] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC283: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 45.414187] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 45.414192] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 45.414195] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 45.414198] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 45.414203] snd_hda_codec_realtek hdaudioC0D0: Mic=0x19 [ 45.414207] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12 [ 45.625569] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 [ 45.626144] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16 [ 45.626331] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17 [ 45.755641] media: Linux media interface: v0.10 [ 45.891354] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 45.893542] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 45.894386] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 45.894392] cfg80211: failed to load regulatory.db [ 46.170171] Bluetooth: Core ver 2.22 [ 46.170217] NET: Registered protocol family 31 [ 46.170220] Bluetooth: HCI device and connection manager initialized [ 46.170229] Bluetooth: HCI socket layer initialized [ 46.170234] Bluetooth: L2CAP socket layer initialized [ 46.170249] Bluetooth: SCO socket layer initialized [ 46.260801] Linux video capture interface: v2.00 [ 46.491450] usbcore: registered new interface driver btusb [ 46.500118] Bluetooth: hci0: rtl: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723 [ 46.500123] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723b_config.bin [ 46.502240] bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_config.bin failed with error -2 [ 46.502248] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723b_fw.bin [ 46.511678] Bluetooth: hci0: rom_version status=0 version=1 [ 46.511703] Bluetooth: hci0: cfg_sz 0, total size 22496 [ 46.607970] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (04f2:b445) [ 46.634592] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [ 46.650993] uvcvideo 1-3.1:1.0: Entity type for entity Extension 5 was not initialized! [ 46.651004] uvcvideo 1-3.1:1.0: Entity type for entity Extension 2 was not initialized! [ 46.651009] uvcvideo 1-3.1:1.0: Entity type for entity Processing 3 was not initialized! [ 46.651013] uvcvideo 1-3.1:1.0: Entity type for entity Camera 1 was not initialized! [ 46.651762] input: USB 2.0 Camera: USB 2.0 Camera as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.1/1-3.1:1.0/input/input18 [ 46.776843] usbcore: registered new interface driver uvcvideo [ 46.776845] USB Video Class driver (1.1.1) [ 46.831128] r8169 0000:02:00.0 enp2s0: link down [ 46.831131] r8169 0000:02:00.0 enp2s0: link down [ 46.831545] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [ 47.451220] rtl8723be: Using firmware rtlwifi/rtl8723befw_36.bin [ 47.500814] ieee80211 phy0: Selected rate control algorithm 'rtl_rc' [ 47.501609] rtlwifi: rtlwifi: wireless switch is on [ 47.774938] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 47.775071] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 47.795957] intel_rapl: Found RAPL domain package [ 47.795962] intel_rapl: Found RAPL domain core [ 48.174804] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 48.174808] Bluetooth: BNEP filters: protocol multicast [ 48.174817] Bluetooth: BNEP socket layer initialized [ 48.284586] rtl8723be 0000:01:00.0 wlp1s0: renamed from wlan0 [ 48.360313] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready [ 49.110134] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready [ 49.117830] r8169 0000:02:00.0 enp2s0: link up [ 49.117851] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready [ 49.213446] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready [ 118.820594] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) [ 122.851456] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 208.562298] raid6: sse2x1 gen() 531 MB/s [ 208.610268] raid6: sse2x1 xor() 1433 MB/s [ 208.658290] raid6: sse2x2 gen() 824 MB/s [ 208.706307] raid6: sse2x2 xor() 1678 MB/s [ 208.754340] raid6: sse2x4 gen() 1262 MB/s [ 208.802462] raid6: sse2x4 xor() 948 MB/s [ 208.802467] raid6: using algorithm sse2x4 gen() 1262 MB/s [ 208.802469] raid6: .... xor() 948 MB/s, rmw enabled [ 208.802471] raid6: using ssse3x2 recovery algorithm [ 208.808618] xor: measuring software checksum speed [ 208.846450] prefetch64-sse: 4566.000 MB/sec [ 208.886458] generic_sse: 4158.000 MB/sec [ 208.886462] xor: using function: prefetch64-sse (4566.000 MB/sec) [ 209.008479] Btrfs loaded, crc32c=crc32c-intel [ 209.198021] JFS: nTxBlock = 8192, nTxLock = 65536 [ 209.356962] SGI XFS with ACLs, security attributes, realtime, no debug enabled [ 2389.506731] perf: interrupt took too long (2512 > 2500), lowering kernel.perf_event_max_sample_rate to 79500 [ 3448.037743] perf: interrupt took too long (3143 > 3140), lowering kernel.perf_event_max_sample_rate to 63500 [ 3515.895517] ntfs: driver 2.1.32 [Flags: R/O MODULE]. [ 3515.984279] QNX4 filesystem 0.2.3 registered. [ 3742.933193] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: errors=remount-ro [ 3782.852879] Adding 2097148k swap on /target/swapfile. Priority:-2 extents:6 across:2260988k FS [ 4004.395510] perf: interrupt took too long (3953 > 3928), lowering kernel.perf_event_max_sample_rate to 50500 [ 7965.493000] perf: interrupt took too long (4946 > 4941), lowering kernel.perf_event_max_sample_rate to 40250 [13487.776760] perf: interrupt took too long (6203 > 6182), lowering kernel.perf_event_max_sample_rate to 32000