[ 0.000000] Linux version 2.6.22-14-generic (buildd@palmer) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 23:05:12 GMT 2007 (Ubuntu 2.6.22-14.46-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007ffb0000 (usable) [ 0.000000] BIOS-e820: 000000007ffb0000 - 000000007ffc0000 (ACPI data) [ 0.000000] BIOS-e820: 000000007ffc0000 - 000000007fff0000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007fff0000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] 1151MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] Entering add_active_range(0, 0, 524208) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 524208 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 524208 [ 0.000000] On node 0 totalpages: 524208 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2303 pages used for memmap [ 0.000000] HighMem zone: 292529 pages, LIFO batch:31 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP signature @ 0xC00FA090 checksum 0 [ 0.000000] ACPI: RSDP 000FA090, 0014 (r0 ACPIAM) [ 0.000000] ACPI: RSDT 7FFB0000, 003C (r1 A M I OEMRSDT 4000809 MSFT 97) [ 0.000000] ACPI: FACP 7FFB0200, 0084 (r2 A M I OEMFACP 12000601 MSFT 97) [ 0.000000] ACPI: DSDT 7FFB0450, 4603 (r1 ASR52 ASR52121 121 INTL 2002026) [ 0.000000] ACPI: FACS 7FFC0000, 0040 [ 0.000000] ACPI: APIC 7FFB0390, 0078 (r1 A M I OEMAPIC 4000809 MSFT 97) [ 0.000000] ACPI: MCFG 7FFB0410, 003C (r1 A M I OEMMCFG 4000809 MSFT 97) [ 0.000000] ACPI: OEMB 7FFC0040, 0056 (r1 A M I AMI_OEM 4000809 MSFT 97) [ 0.000000] ACPI: HPET 7FFB4A60, 0038 (r1 A M I OEMHPET0 4000809 MSFT 97) [ 0.000000] ACPI: SSDT 7FFB4AA0, 0350 (r1 A M I POWERNOW 1 AMD 1) [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 15:3 APIC version 16 [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] Processor #1 15:3 APIC version 16 [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfec10000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 3, version 17, address 0xfec10000, GSI 24-39 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 2 I/O APICs [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:7f000000) [ 0.000000] Built 1 zonelists. Total pages: 520113 [ 0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.gz quiet splash -- [ 0.000000] mapped APIC to ffffd000 (fee00000) [ 0.000000] mapped IOAPIC to ffffc000 (fec00000) [ 0.000000] mapped IOAPIC to ffffb000 (fec10000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 3214.440 MHz processor. [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 2067080k/2096832k available (2015k kernel code, 28428k reserved, 916k data, 364k init, 1179328k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 0.000000] .init : 0xc03e3000 - 0xc043e000 ( 364 kB) [ 0.000000] .data : 0xc02f7d26 - 0xc03dce84 ( 916 kB) [ 0.000000] .text : 0xc0100000 - 0xc02f7d26 (2015 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 0.000000] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 0.000000] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 [ 0.000000] hpet0: 3 32-bit timers, 25000000 Hz [ 0.080000] Calibrating delay using timer specific routine.. 6432.73 BogoMIPS (lpj=12865461) [ 0.080000] Security Framework v1.0.0 initialized [ 0.080000] SELinux: Disabled at boot. [ 0.080000] Mount-cache hash table entries: 512 [ 0.080000] CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f [ 0.080000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.080000] CPU: L2 Cache: 1024K (64 bytes/line) [ 0.080000] CPU 0(2) -> Core 0 [ 0.080000] CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001f [ 0.080000] Compat vDSO mapped to ffffe000. [ 0.080000] Checking 'hlt' instruction... OK. [ 0.096000] SMP alternatives: switching to UP code [ 0.096000] Early unpacking initramfs... done [ 0.280000] ACPI: Core revision 20070126 [ 0.280000] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 0.280000] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 6400+ stepping 03 [ 0.280000] SMP alternatives: switching to SMP code [ 0.280000] Booting processor 1/1 eip 3000 [ 0.292000] Initializing CPU#1 [ 0.372000] Calibrating delay using timer specific routine.. 6428.87 BogoMIPS (lpj=12857741) [ 0.372000] CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f [ 0.372000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.372000] CPU: L2 Cache: 1024K (64 bytes/line) [ 0.372000] CPU 1(2) -> Core 1 [ 0.372000] CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001f [ 0.372000] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 6400+ stepping 03 [ 0.372000] Total of 2 processors activated (12861.60 BogoMIPS). [ 0.372000] ENABLING IO-APIC IRQs [ 0.372000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.416000] Brought up 2 CPUs [ 0.504000] migration_cost=0 [ 0.504000] Booting paravirtualized kernel on bare hardware [ 0.504000] Time: 0:28:32 Date: 06/23/108 [ 0.504000] NET: Registered protocol family 16 [ 0.504000] EISA bus registered [ 0.504000] ACPI: bus type pci registered [ 0.504000] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5 [ 0.504000] PCI: Using configuration type 1 [ 0.504000] Setting up standard PCI resources [ 0.508000] ACPI: EC: Look up EC in DSDT [ 0.508000] ACPI: Interpreter enabled [ 0.508000] ACPI: (supports S0 S1 S3 S4 S5) [ 0.508000] ACPI: Using IOAPIC for interrupt routing [ 0.508000] Error attaching device data [ 0.508000] Error attaching device data [ 0.508000] Error attaching device data [ 0.508000] Error attaching device data [ 0.516000] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.516000] PCI: Probing PCI hardware (bus 00) [ 0.516000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.516000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.516000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEB0._PRT] [ 0.516000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEB1._PRT] [ 0.516000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEB2._PRT] [ 0.520000] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled. [ 0.520000] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *5 [ 0.520000] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled. [ 0.520000] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *9 [ 0.520000] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *11 [ 0.520000] ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22) *9 [ 0.520000] ACPI: PCI Interrupt Link [LUS1] (IRQs 20 21 22) *11 [ 0.520000] ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22) *3 [ 0.520000] ACPI: PCI Interrupt Link [LKLN] (IRQs 20 21 22) *0, disabled. [ 0.520000] ACPI: PCI Interrupt Link [LAUI] (IRQs 20 21 22) *0, disabled. [ 0.520000] ACPI: PCI Interrupt Link [LKMO] (IRQs 20 21 22) *0, disabled. [ 0.520000] ACPI: PCI Interrupt Link [LKSM] (IRQs 20 21 22) *0, disabled. [ 0.520000] ACPI: PCI Interrupt Link [LTID] (IRQs 20 21 22) *10 [ 0.520000] ACPI: PCI Interrupt Link [LTIE] (IRQs 20 21 22) *0, disabled. [ 0.520000] ACPI: PCI Interrupt Link [LATA] (IRQs 22) *14 [ 0.520000] ACPI: Power Resource [ISAV] (on) [ 0.520000] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.520000] pnp: PnP ACPI init [ 0.520000] ACPI: bus type pnp registered [ 0.524000] pnp: PnP ACPI: found 16 devices [ 0.524000] ACPI: ACPI bus type pnp unregistered [ 0.524000] PnPBIOS: Disabled by ACPI PNP [ 0.524000] PCI: Using ACPI for IRQ routing [ 0.524000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 0.532000] NET: Registered protocol family 8 [ 0.532000] NET: Registered protocol family 20 [ 0.532000] pnp: 00:09: iomem range 0xfec00000-0xfec00fff has been reserved [ 0.532000] pnp: 00:09: iomem range 0xfee00000-0xfeefffff has been reserved [ 0.532000] pnp: 00:09: iomem range 0xff380000-0xffffffff could not be reserved [ 0.532000] pnp: 00:09: iomem range 0xfec10000-0xfec10fff has been reserved [ 0.532000] pnp: 00:0d: ioport range 0x290-0x29f has been reserved [ 0.532000] pnp: 00:0e: iomem range 0xe0000000-0xefffffff has been reserved [ 0.532000] pnp: 00:0f: iomem range 0x0-0x9ffff could not be reserved [ 0.532000] pnp: 00:0f: iomem range 0xc0000-0xcffff could not be reserved [ 0.532000] pnp: 00:0f: iomem range 0xe0000-0xfffff could not be reserved [ 0.532000] pnp: 00:0f: iomem range 0x100000-0x7fffffff could not be reserved [ 0.536000] Time: hpet clocksource has been installed. [ 0.536000] Switched to high resolution mode on CPU 0 [ 0.536000] Switched to high resolution mode on CPU 1 [ 0.560000] PCI: Bridge: 0000:00:0b.0 [ 0.560000] IO window: disabled. [ 0.560000] MEM window: fe000000-febfffff [ 0.560000] PREFETCH window: fa000000-fbffffff [ 0.564000] PCI: Bridge: 0000:00:0e.0 [ 0.564000] IO window: e000-efff [ 0.564000] MEM window: disabled. [ 0.564000] PREFETCH window: disabled. [ 0.564000] PCI: Bridge: 0000:00:11.0 [ 0.564000] IO window: disabled. [ 0.564000] MEM window: disabled. [ 0.564000] PREFETCH window: f9f00000-f9ffffff [ 0.564000] PCI: Bridge: 0000:00:12.0 [ 0.564000] IO window: c000-cfff [ 0.564000] MEM window: fde00000-fdefffff [ 0.564000] PREFETCH window: disabled. [ 0.564000] PCI: Bridge: 0000:00:13.0 [ 0.564000] IO window: d000-dfff [ 0.564000] MEM window: fdf00000-fdffffff [ 0.564000] PREFETCH window: disabled. [ 0.564000] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 0.564000] ACPI: PCI Interrupt 0000:00:11.0[A] -> GSI 29 (level, low) -> IRQ 16 [ 0.564000] PCI: Setting latency timer of device 0000:00:11.0 to 64 [ 0.564000] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 34 (level, low) -> IRQ 17 [ 0.564000] PCI: Setting latency timer of device 0000:00:12.0 to 64 [ 0.564000] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 39 (level, low) -> IRQ 18 [ 0.564000] PCI: Setting latency timer of device 0000:00:13.0 to 64 [ 0.564000] NET: Registered protocol family 2 [ 0.612000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.612000] TCP established hash table entries: 131072 (order: 8, 1572864 bytes) [ 0.612000] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.612000] TCP: Hash tables configured (established 131072 bind 65536) [ 0.612000] TCP reno registered [ 0.628000] checking if image is initramfs... it is [ 0.992000] Freeing initrd memory: 7305k freed [ 0.992000] audit: initializing netlink socket (disabled) [ 0.992000] audit(1216772912.536:1): initialized [ 0.992000] highmem bounce pool size: 64 pages [ 0.992000] VFS: Disk quotas dquot_6.5.1 [ 0.992000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.992000] io scheduler noop registered [ 0.992000] io scheduler anticipatory registered [ 0.992000] io scheduler deadline registered [ 0.992000] io scheduler cfq registered (default) [ 0.992000] Boot video device is 0000:04:00.0 [ 0.992000] PCI: Setting latency timer of device 0000:00:11.0 to 64 [ 0.992000] assign_interrupt_mode Found MSI capability [ 0.992000] Allocate Port Service[0000:00:11.0:pcie00] [ 0.992000] PCI: Setting latency timer of device 0000:00:12.0 to 64 [ 0.992000] assign_interrupt_mode Found MSI capability [ 0.992000] Allocate Port Service[0000:00:12.0:pcie00] [ 0.992000] PCI: Setting latency timer of device 0000:00:13.0 to 64 [ 0.992000] assign_interrupt_mode Found MSI capability [ 0.992000] Allocate Port Service[0000:00:13.0:pcie00] [ 0.992000] isapnp: Scanning for PnP cards... [ 1.348000] isapnp: No Plug & Play device found [ 1.360000] Real Time Clock Driver v1.12ac [ 1.360000] hpet_resources: 0xfed00000 is busy [ 1.360000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 1.360000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.360000] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.360000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 1.360000] input: Macintosh mouse button emulation as /class/input/input0 [ 1.360000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 1.364000] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.364000] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.364000] mice: PS/2 mouse device common for all mice [ 1.364000] EISA: Probing bus 0 at eisa.0 [ 1.364000] Cannot allocate resource for EISA slot 4 [ 1.364000] Cannot allocate resource for EISA slot 5 [ 1.364000] EISA: Detected 0 cards. [ 1.364000] TCP cubic registered [ 1.364000] NET: Registered protocol family 1 [ 1.364000] Using IPI No-Shortcut mode [ 1.364000] Magic number: 0:656:456 [ 1.364000] hash matches device urandom [ 1.364000] Freeing unused kernel memory: 364k freed [ 1.384000] input: AT Translated Set 2 keyboard as /class/input/input1 [ 2.496000] AppArmor: AppArmor initialized<5>audit(1216772914.036:2): type=1505 info="AppArmor initialized" pid=1240 [ 2.500000] fuse init (API version 7.8) [ 2.504000] Failure registering capabilities with primary security module. [ 2.540000] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126] [ 2.540000] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126] [ 2.840000] usbcore: registered new interface driver usbfs [ 2.840000] usbcore: registered new interface driver hub [ 2.840000] usbcore: registered new device driver usb [ 2.840000] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22 [ 2.840000] ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [LUS2] -> GSI 22 (level, low) -> IRQ 19 [ 2.840000] PCI: Setting latency timer of device 0000:00:02.2 to 64 [ 2.840000] ehci_hcd 0000:00:02.2: EHCI Host Controller [ 2.840000] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1 [ 2.840000] ehci_hcd 0000:00:02.2: debug port 1 [ 2.840000] PCI: cache line size of 64 is not supported by device 0000:00:02.2 [ 2.840000] ehci_hcd 0000:00:02.2: irq 19, io mem 0xfddffc00 [ 2.840000] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 2.840000] usb usb1: configuration #1 chosen from 1 choice [ 2.840000] hub 1-0:1.0: USB hub found [ 2.840000] hub 1-0:1.0: 8 ports detected [ 2.848000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 2.848000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 2.868000] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.872000] SCSI subsystem initialized [ 2.876000] libata version 2.21 loaded. [ 2.920000] Floppy drive(s): fd0 is 1.44M [ 2.944000] FDC 0 is a post-1991 82077 [ 2.944000] NFORCE3-250: IDE controller at PCI slot 0000:00:08.0 [ 2.944000] NFORCE3-250: chipset revision 162 [ 2.944000] NFORCE3-250: not 100% native mode: will probe irqs later [ 2.944000] NFORCE3-250: BIOS didn't set cable bits correctly. Enabling workaround. [ 2.944000] NFORCE3-250: 0000:00:08.0 (rev a2) UDMA133 controller [ 2.944000] ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:pio, hdb:DMA [ 2.944000] ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio [ 2.944000] Probing IDE interface ide0... [ 3.676000] end_request: I/O error, dev fd0, sector 0 [ 3.960000] hdb: LITE-ON DVDRW SHW-16H5S, ATAPI CD/DVD-ROM drive [ 4.016000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 4.028000] Probing IDE interface ide1... [ 4.596000] ahci 0000:01:00.0: version 2.2 [ 4.596000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 30 (level, low) -> IRQ 20 [ 4.708000] end_request: I/O error, dev fd0, sector 0 [ 5.600000] ahci 0000:01:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 5.600000] ahci 0000:01:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 5.600000] PCI: Setting latency timer of device 0000:01:00.0 to 64 [ 5.600000] scsi0 : ahci [ 5.600000] scsi1 : ahci [ 5.600000] ata1: SATA max UDMA/133 cmd 0xf88f4100 ctl 0x00000000 bmdma 0x00000000 irq 20 [ 5.600000] ata2: SATA max UDMA/133 cmd 0xf88f4180 ctl 0x00000000 bmdma 0x00000000 irq 20 [ 5.740000] end_request: I/O error, dev fd0, sector 0 [ 6.084000] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 6.084000] ata1.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7 [ 6.084000] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 6.084000] ata1.00: configured for UDMA/133 [ 6.396000] ata2: SATA link down (SStatus 0 SControl 300) [ 6.396000] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5 [ 6.396000] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 21 [ 6.396000] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUS0] -> GSI 21 (level, low) -> IRQ 21 [ 6.396000] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 6.396000] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 6.396000] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 6.396000] ohci_hcd 0000:00:02.0: irq 21, io mem 0xfddfd000 [ 6.400000] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB) [ 6.400000] sd 0:0:0:0: [sda] Write Protect is off [ 6.400000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 6.400000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.400000] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB) [ 6.400000] sd 0:0:0:0: [sda] Write Protect is off [ 6.400000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 6.400000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.400000] sda: sda1 sda2 <<6>usb usb2: configuration #1 chosen from 1 choice [ 6.452000] hub 2-0:1.0: USB hub found [ 6.452000] hub 2-0:1.0: 4 ports detected [ 6.456000] sda5 sda6 > [ 6.464000] sd 0:0:0:0: [sda] Attached SCSI disk [ 6.468000] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 6.556000] ACPI: PCI Interrupt Link [LUS1] enabled at IRQ 20 [ 6.556000] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUS1] -> GSI 20 (level, low) -> IRQ 22 [ 6.556000] PCI: Setting latency timer of device 0000:00:02.1 to 64 [ 6.556000] ohci_hcd 0000:00:02.1: OHCI Host Controller [ 6.556000] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3 [ 6.556000] ohci_hcd 0000:00:02.1: irq 22, io mem 0xfddfe000 [ 6.612000] usb usb3: configuration #1 chosen from 1 choice [ 6.612000] hub 3-0:1.0: USB hub found [ 6.612000] hub 3-0:1.0: 4 ports detected [ 6.716000] r8169 Gigabit Ethernet driver 2.2LK loaded [ 6.716000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 35 (level, low) -> IRQ 23 [ 6.716000] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 6.716000] sata_nv 0000:00:0a.0: version 3.4 [ 6.716000] eth0: RTL8168b/8111b at 0xf8844000, 00:19:66:67:be:0a, XID 38000000 IRQ 23 [ 6.716000] ACPI: PCI Interrupt Link [LTID] enabled at IRQ 22 [ 6.716000] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LTID] -> GSI 22 (level, low) -> IRQ 19 [ 6.716000] PCI: Setting latency timer of device 0000:00:0a.0 to 64 [ 6.716000] scsi2 : sata_nv [ 6.716000] scsi3 : sata_nv [ 6.716000] ata3: SATA max UDMA/133 cmd 0x00010f80 ctl 0x00010f02 bmdma 0x0001b000 irq 19 [ 6.716000] ata4: SATA max UDMA/133 cmd 0x00010e80 ctl 0x00010e02 bmdma 0x0001b008 irq 19 [ 6.772000] end_request: I/O error, dev fd0, sector 0 [ 6.960000] kjournald starting. Commit interval 5 seconds [ 6.960000] EXT3-fs: mounted filesystem with ordered data mode. [ 7.184000] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 7.192000] ata3.00: ATA-6: WDC WD2000JD-00KLB0, 08.05J08, max UDMA/100 [ 7.192000] ata3.00: 390721968 sectors, multi 16: LBA48 [ 7.208000] ata3.00: configured for UDMA/100 [ 7.520000] ata4: SATA link down (SStatus 0 SControl 300) [ 7.520000] scsi 2:0:0:0: Direct-Access ATA WDC WD2000JD-00K 08.0 PQ: 0 ANSI: 5 [ 7.520000] sd 2:0:0:0: [sdb] 390721968 512-byte hardware sectors (200050 MB) [ 7.520000] sd 2:0:0:0: [sdb] Write Protect is off [ 7.520000] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 7.520000] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 7.520000] sd 2:0:0:0: [sdb] 390721968 512-byte hardware sectors (200050 MB) [ 7.520000] sd 2:0:0:0: [sdb] Write Protect is off [ 7.520000] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 7.520000] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 7.520000] sdb: sdb1 [ 7.524000] sd 2:0:0:0: [sdb] Attached SCSI disk [ 7.524000] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 7.524000] PCI: Enabling device 0000:01:00.1 (0000 -> 0001) [ 7.524000] ACPI: PCI Interrupt 0000:01:00.1[B] -> GSI 31 (level, low) -> IRQ 24 [ 7.524000] PCI: Setting latency timer of device 0000:01:00.1 to 64 [ 7.524000] scsi4 : pata_jmicron [ 7.524000] scsi5 : pata_jmicron [ 7.524000] ata5: PATA max UDMA/100 cmd 0x0001cc00 ctl 0x0001c882 bmdma 0x0001c400 irq 24 [ 7.524000] ata6: PATA max UDMA/100 cmd 0x0001c800 ctl 0x0001c482 bmdma 0x0001c408 irq 24 [ 7.536000] hdb: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(66) [ 7.536000] Uniform CD-ROM driver Revision: 3.20 [ 7.996000] end_request: I/O error, dev fd0, sector 0 [ 8.860000] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 8.888000] ISO 9660 Extensions: RRIP_1991A [ 9.116000] Registering unionfs 1.4 [ 9.116000] unionfs: debugging is not enabled [ 9.120000] loop: module loaded [ 9.328000] squashfs: version 3.2-UBUNTU (2007/07/26) Phillip Lougher [ 53.008000] Linux agpgart interface v0.102 (c) Dave Jones [ 53.240000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 53.268000] agpgart: Detected AGP bridge 0 [ 53.268000] agpgart: Setting up Nforce3 AGP. [ 53.268000] agpgart: AGP aperture is 64M @ 0xf4000000 [ 53.368000] input: PC Speaker as /class/input/input2 [ 53.388000] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x5000 [ 53.388000] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x5040 [ 53.748000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 53.780000] parport_pc 00:06: reported by Plug and Play ACPI [ 53.780000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 53.960000] Driver for 1-wire Dallas network protocol. [ 54.076000] gameport: EMU10K1 is pci0000:05:07.1/gameport0, io 0xec00, speed 1125kHz [ 54.092000] matrox_w1 0000:04:00.0: Matrox G400 GPIO transport layer for 1-wire. [ 54.180000] input: PS2++ Logitech Wheel Mouse as /class/input/input3 [ 54.452000] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 19 [ 54.452000] ACPI: PCI Interrupt 0000:05:07.0[A] -> Link [LNKD] -> GSI 19 (level, low) -> IRQ 25 [ 55.420000] Adding 995988k swap on /dev/sda5. Priority:-1 extents:1 across:995988k [ 56.804000] No dock devices found. [ 56.848000] input: Power Button (FF) as /class/input/input4 [ 56.848000] ACPI: Power Button (FF) [PWRF] [ 56.848000] input: Power Button (CM) as /class/input/input5 [ 56.848000] ACPI: Power Button (CM) [PWRB] [ 57.592000] powernow-k8: Found 2 AMD Athlon(tm) 64 X2 Dual Core Processor 6400+ processors (version 2.00.00) [ 57.592000] powernow-k8: 0 : fid 0x18 (3200 MHz), vid 0x6 [ 57.592000] powernow-k8: 1 : fid 0x16 (3000 MHz), vid 0x8 [ 57.592000] powernow-k8: 2 : fid 0x14 (2800 MHz), vid 0xa [ 57.592000] powernow-k8: 3 : fid 0x12 (2600 MHz), vid 0xc [ 57.592000] powernow-k8: 4 : fid 0x10 (2400 MHz), vid 0xe [ 57.592000] powernow-k8: 5 : fid 0xe (2200 MHz), vid 0x10 [ 57.592000] powernow-k8: 6 : fid 0xc (2000 MHz), vid 0x10 [ 57.592000] powernow-k8: 7 : fid 0xa (1800 MHz), vid 0x10 [ 57.592000] powernow-k8: 8 : fid 0x2 (1000 MHz), vid 0x12 [ 61.108000] lp0: using parport0 (interrupt-driven). [ 62.228000] ppdev: user-space parallel port driver [ 62.628000] r8169: eth0: link up [ 62.628000] r8169: eth0: link up [ 63.796000] apm: BIOS version 1.2 Flags 0x02 (Driver version 1.16ac) [ 63.796000] apm: disabled - APM is not SMP safe. [ 64.012000] Failure registering capabilities with primary security module. [ 65.032000] Bluetooth: Core ver 2.11 [ 65.032000] NET: Registered protocol family 31 [ 65.032000] Bluetooth: HCI device and connection manager initialized [ 65.032000] Bluetooth: HCI socket layer initialized [ 65.156000] Bluetooth: L2CAP ver 2.8 [ 65.156000] Bluetooth: L2CAP socket layer initialized [ 65.180000] Bluetooth: RFCOMM socket layer initialized [ 65.180000] Bluetooth: RFCOMM TTY layer initialized [ 65.180000] Bluetooth: RFCOMM ver 1.8 [ 65.500000] Clocksource tsc unstable (delta = -343760214 ns) [ 70.492000] NET: Registered protocol family 17 [ 73.528000] [drm] Initialized drm 1.1.0 20060810 [ 73.552000] ACPI: PCI Interrupt 0000:04:00.0[A] -> Link [LNKD] -> GSI 19 (level, low) -> IRQ 25 [ 73.552000] [drm] Initialized mga 3.2.1 20051102 on minor 0 [ 73.556000] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. [ 73.556000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode [ 73.556000] agpgart: Putting AGP V2 device at 0000:04:00.0 into 1x mode [ 75.096000] NET: Registered protocol family 10 [ 75.096000] lo: Disabled Privacy Extensions [ 85.960000] eth0: no IPv6 routers present