[ 0.000000] microcode: microcode updated early to revision 0xa0b, date = 2010-09-28 [ 0.000000] Linux version 4.15.0-39-generic (buildd@lcy01-amd64-012) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.10)) #42~16.04.1-Ubuntu SMP Wed Oct 24 17:09:54 UTC 2018 (Ubuntu 4.15.0-39.42~16.04.1-generic 4.15.18) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-39-generic root=UUID=c6949edb-9afc-44db-88a0-9c44e35dde0b ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cff7ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cff80000-0x00000000cff8dfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000cff8e000-0x00000000cffcffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000cffd0000-0x00000000cfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.5 present. [ 0.000000] DMI: System manufacturer P5QL PRO/P5QL PRO, BIOS 1004 07/01/2009 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x230000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-DFFFF write-protect [ 0.000000] E0000-EFFFF write-through [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask E00000000 write-back [ 0.000000] 1 base 200000000 mask FE0000000 write-back [ 0.000000] 2 base 220000000 mask FF0000000 write-back [ 0.000000] 3 base 0D0000000 mask FF0000000 uncachable [ 0.000000] 4 base 0E0000000 mask FE0000000 uncachable [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] total RAM covered: 8192M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 64K num_reg: 6 lose cover RAM: 0G [ 0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xcff80 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ (ptrval)] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ (ptrval)] 99000 size 24576 [ 0.000000] BRK [0xc8b3f000, 0xc8b3ffff] PGTABLE [ 0.000000] BRK [0xc8b40000, 0xc8b40fff] PGTABLE [ 0.000000] BRK [0xc8b41000, 0xc8b41fff] PGTABLE [ 0.000000] BRK [0xc8b42000, 0xc8b42fff] PGTABLE [ 0.000000] BRK [0xc8b43000, 0xc8b43fff] PGTABLE [ 0.000000] BRK [0xc8b44000, 0xc8b44fff] PGTABLE [ 0.000000] BRK [0xc8b45000, 0xc8b45fff] PGTABLE [ 0.000000] BRK [0xc8b46000, 0xc8b46fff] PGTABLE [ 0.000000] BRK [0xc8b47000, 0xc8b47fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x315a0000-0x34ac7fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000FBB10 000024 (v02 ACPIAM) [ 0.000000] ACPI: XSDT 0x00000000CFF80100 00005C (v01 A_M_I_ OEMXSDT 07000901 MSFT 00000097) [ 0.000000] ACPI: FACP 0x00000000CFF80290 0000F4 (v03 A_M_I_ OEMFACP 07000901 MSFT 00000097) [ 0.000000] ACPI: DSDT 0x00000000CFF80440 008888 (v01 A1014 A1014001 00000001 INTL 20060113) [ 0.000000] ACPI: FACS 0x00000000CFF8E000 000040 [ 0.000000] ACPI: FACS 0x00000000CFF8E000 000040 [ 0.000000] ACPI: APIC 0x00000000CFF80390 00006C (v01 A_M_I_ OEMAPIC 07000901 MSFT 00000097) [ 0.000000] ACPI: MCFG 0x00000000CFF80400 00003C (v01 A_M_I_ OEMMCFG 07000901 MSFT 00000097) [ 0.000000] ACPI: OEMB 0x00000000CFF8E040 000081 (v01 A_M_I_ AMI_OEM 07000901 MSFT 00000097) [ 0.000000] ACPI: HPET 0x00000000CFF88CD0 000038 (v01 A_M_I_ OEMHPET 07000901 MSFT 00000097) [ 0.000000] ACPI: OSFR 0x00000000CFF88D10 0000B0 (v01 A_M_I_ OEMOSFR 07000901 MSFT 00000097) [ 0.000000] ACPI: SSDT 0x00000000CFF8E8D0 000A7C (v01 DpgPmm CpuPm 00000012 INTL 20060113) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000022fffffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x22ffd1000-0x22fffbfff] [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000022fffffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000cff7ffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000022fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000022fffffff] [ 0.000000] On node 0 totalpages: 2096926 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 13246 pages used for memmap [ 0.000000] DMA32 zone: 847744 pages, LIFO batch:31 [ 0.000000] Normal zone: 19456 pages used for memmap [ 0.000000] Normal zone: 1245184 pages, LIFO batch:31 [ 0.000000] Reserved but unavailable: 98 pages [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xcff80000-0xcff8dfff] [ 0.000000] PM: Registered nosave memory: [mem 0xcff8e000-0xcffcffff] [ 0.000000] PM: Registered nosave memory: [mem 0xcffd0000-0xcfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffefffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfff00000-0xffffffff] [ 0.000000] e820: [mem 0xd0000000-0xfedfffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] random: get_random_bytes called from start_kernel+0x99/0x51b with crng_init=0 [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u524288 [ 0.000000] pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2064139 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-39-generic root=UUID=c6949edb-9afc-44db-88a0-9c44e35dde0b ro quiet splash vt.handoff=7 [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 8107232K/8387704K available (12300K kernel code, 2471K rwdata, 4260K rodata, 2408K init, 2416K bss, 280472K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Kernel/User page tables isolation: enabled [ 0.000000] ftrace: allocating 39184 entries in 154 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16 [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] ACPI: Core revision 20170831 [ 0.000000] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] APIC: Switch to symmetric I/O mode setup [ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.020000] tsc: Fast TSC calibration failed [ 0.028000] tsc: PIT calibration matches HPET. 1 loops [ 0.028000] tsc: Detected 2331.008 MHz processor [ 0.028000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4662.01 BogoMIPS (lpj=9324032) [ 0.028000] pid_max: default: 32768 minimum: 301 [ 0.028000] Security Framework initialized [ 0.028000] Yama: becoming mindful. [ 0.028000] AppArmor: AppArmor initialized [ 0.032135] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.033795] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.033880] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.033935] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.034253] mce: CPU supports 6 MCE banks [ 0.034261] CPU0: Thermal monitoring enabled (TM2) [ 0.034263] process: using mwait in idle threads [ 0.034268] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 [ 0.034269] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0 [ 0.034272] Spectre V2 : Mitigation: Full generic retpoline [ 0.034272] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.034274] Speculative Store Bypass: Vulnerable [ 0.034425] Freeing SMP alternatives memory: 36K [ 0.044000] smpboot: CPU0: Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz (family: 0x6, model: 0x17, stepping: 0xa) [ 0.044000] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver. [ 0.044000] ... version: 2 [ 0.044000] ... bit width: 40 [ 0.044000] ... generic registers: 2 [ 0.044000] ... value mask: 000000ffffffffff [ 0.044000] ... max period: 000000007fffffff [ 0.044000] ... fixed-purpose events: 3 [ 0.044000] ... event mask: 0000000700000003 [ 0.044000] Hierarchical SRCU implementation. [ 0.044000] smp: Bringing up secondary CPUs ... [ 0.044000] x86: Booting SMP configuration: [ 0.044000] .... node #0, CPUs: #1 [ 0.050135] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.050162] #2 #3 [ 0.066677] smp: Brought up 1 node, 4 CPUs [ 0.066677] smpboot: Max logical packages: 1 [ 0.066677] smpboot: Total of 4 processors activated (18648.06 BogoMIPS) [ 0.068477] devtmpfs: initialized [ 0.068477] x86/mm: Memory block size: 128MB [ 0.069223] evm: security.selinux [ 0.069224] evm: security.SMACK64 [ 0.069224] evm: security.SMACK64EXEC [ 0.069225] evm: security.SMACK64TRANSMUTE [ 0.069226] evm: security.SMACK64MMAP [ 0.069227] evm: security.apparmor [ 0.069227] evm: security.ima [ 0.069228] evm: security.capability [ 0.069248] PM: Registering ACPI NVS region [mem 0xcff8e000-0xcffcffff] (270336 bytes) [ 0.069248] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.069248] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.069248] pinctrl core: initialized pinctrl subsystem [ 0.069248] RTC time: 9:43:50, date: 12/11/18 [ 0.072123] NET: Registered protocol family 16 [ 0.072235] audit: initializing netlink subsys (disabled) [ 0.072243] audit: type=2000 audit(1544521429.072:1): state=initialized audit_enabled=0 res=1 [ 0.072243] cpuidle: using governor ladder [ 0.072243] cpuidle: using governor menu [ 0.072243] ACPI: bus type PCI registered [ 0.072243] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.072243] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.072243] PCI: not using MMCONFIG [ 0.072243] PCI: Using configuration type 1 for base access [ 0.073904] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.073904] ACPI: Added _OSI(Module Device) [ 0.073904] ACPI: Added _OSI(Processor Device) [ 0.073904] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.073904] ACPI: Added _OSI(Processor Aggregator Device) [ 0.073904] ACPI: Added _OSI(Linux-Dell-Video) [ 0.073904] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.073904] ACPI: Executed 1 blocks of module-level executable AML code [ 0.083259] ACPI: Dynamic OEM Table Load: [ 0.083266] ACPI: SSDT 0xFFFF9419E5CAAA00 0001F3 (v01 DpgPmm P001Ist 00000011 INTL 20060113) [ 0.083820] ACPI: Dynamic OEM Table Load: [ 0.083825] ACPI: SSDT 0xFFFF9419E5CAA200 0001F3 (v01 DpgPmm P002Ist 00000012 INTL 20060113) [ 0.084388] ACPI: Dynamic OEM Table Load: [ 0.084393] ACPI: SSDT 0xFFFF9419E5CAB800 0001F3 (v01 DpgPmm P003Ist 00000012 INTL 20060113) [ 0.084955] ACPI: Dynamic OEM Table Load: [ 0.084960] ACPI: SSDT 0xFFFF9419E5CAB200 0001F3 (v01 DpgPmm P004Ist 00000012 INTL 20060113) [ 0.085534] ACPI: Interpreter enabled [ 0.085561] ACPI: (supports S0 S1 S3 S4 S5) [ 0.085562] ACPI: Using IOAPIC for interrupt routing [ 0.085606] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.087356] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.087375] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.087659] ACPI: Enabled 15 GPEs in block 00 to 3F [ 0.098587] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.098594] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.098600] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.098984] PCI host bridge to bus 0000:00 [ 0.098986] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.098988] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.098990] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.098992] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window] [ 0.098994] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xffffffff window] [ 0.098996] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.099005] pci 0000:00:00.0: [8086:2e20] type 00 class 0x060000 [ 0.099030] DMAR: Forcing write-buffer flush capability [ 0.099031] DMAR: Disabling IOMMU for graphics on this chipset [ 0.099140] pci 0000:00:01.0: [8086:2e21] type 01 class 0x060400 [ 0.099181] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.099312] pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300 [ 0.099353] pci 0000:00:1a.0: reg 0x20: [io 0xb800-0xb81f] [ 0.099496] pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300 [ 0.099536] pci 0000:00:1a.1: reg 0x20: [io 0xb880-0xb89f] [ 0.099677] pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300 [ 0.099717] pci 0000:00:1a.2: reg 0x20: [io 0xbc00-0xbc1f] [ 0.099863] pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320 [ 0.099884] pci 0000:00:1a.7: reg 0x10: [mem 0xf9fffc00-0xf9ffffff] [ 0.099961] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.100080] pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300 [ 0.100099] pci 0000:00:1b.0: reg 0x10: [mem 0xf9ff8000-0xf9ffbfff 64bit] [ 0.100165] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.100276] pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400 [ 0.100345] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.100466] pci 0000:00:1c.4: [8086:3a48] type 01 class 0x060400 [ 0.100534] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.100652] pci 0000:00:1c.5: [8086:3a4a] type 01 class 0x060400 [ 0.100731] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.100848] pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300 [ 0.100888] pci 0000:00:1d.0: reg 0x20: [io 0xb080-0xb09f] [ 0.101028] pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300 [ 0.101068] pci 0000:00:1d.1: reg 0x20: [io 0xb400-0xb41f] [ 0.101207] pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300 [ 0.101247] pci 0000:00:1d.2: reg 0x20: [io 0xb480-0xb49f] [ 0.101393] pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320 [ 0.101413] pci 0000:00:1d.7: reg 0x10: [mem 0xf9fff800-0xf9fffbff] [ 0.101490] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.101598] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 0.101751] pci 0000:00:1f.0: [8086:3a18] type 00 class 0x060100 [ 0.101946] pci 0000:00:1f.2: [8086:3a20] type 00 class 0x01018a [ 0.101961] pci 0000:00:1f.2: reg 0x10: [io 0x0000-0x0007] [ 0.101968] pci 0000:00:1f.2: reg 0x14: [io 0x0000-0x0003] [ 0.101975] pci 0000:00:1f.2: reg 0x18: [io 0x0000-0x0007] [ 0.101982] pci 0000:00:1f.2: reg 0x1c: [io 0x0000-0x0003] [ 0.101989] pci 0000:00:1f.2: reg 0x20: [io 0xff90-0xff9f] [ 0.101996] pci 0000:00:1f.2: reg 0x24: [io 0xffa0-0xffaf] [ 0.102005] pci 0000:00:1f.2: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 0.102007] pci 0000:00:1f.2: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 0.102008] pci 0000:00:1f.2: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 0.102010] pci 0000:00:1f.2: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 0.102133] pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500 [ 0.102150] pci 0000:00:1f.3: reg 0x10: [mem 0xf9fff400-0xf9fff4ff 64bit] [ 0.102168] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f] [ 0.102282] pci 0000:00:1f.5: [8086:3a26] type 00 class 0x010185 [ 0.102298] pci 0000:00:1f.5: reg 0x10: [io 0xb000-0xb007] [ 0.102305] pci 0000:00:1f.5: reg 0x14: [io 0xac00-0xac03] [ 0.102311] pci 0000:00:1f.5: reg 0x18: [io 0xa880-0xa887] [ 0.102318] pci 0000:00:1f.5: reg 0x1c: [io 0xa800-0xa803] [ 0.102325] pci 0000:00:1f.5: reg 0x20: [io 0xa480-0xa48f] [ 0.102332] pci 0000:00:1f.5: reg 0x24: [io 0xa400-0xa40f] [ 0.102498] pci 0000:01:00.0: [10de:06e4] type 00 class 0x030000 [ 0.102514] pci 0000:01:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff] [ 0.102523] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.102533] pci 0000:01:00.0: reg 0x1c: [mem 0xfa000000-0xfbffffff 64bit] [ 0.102539] pci 0000:01:00.0: reg 0x24: [io 0xcc00-0xcc7f] [ 0.102546] pci 0000:01:00.0: reg 0x30: [mem 0xfe9e0000-0xfe9fffff pref] [ 0.102552] pci 0000:01:00.0: enabling Extended Tags [ 0.102647] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.102650] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff] [ 0.102653] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfe9fffff] [ 0.102656] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.102699] pci 0000:00:1c.0: PCI bridge to [bus 04] [ 0.102707] pci 0000:00:1c.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref] [ 0.102764] pci 0000:03:00.0: [11ab:6101] type 00 class 0x01018f [ 0.102788] pci 0000:03:00.0: reg 0x10: [io 0xec00-0xec07] [ 0.102799] pci 0000:03:00.0: reg 0x14: [io 0xe880-0xe883] [ 0.102810] pci 0000:03:00.0: reg 0x18: [io 0xe800-0xe807] [ 0.102821] pci 0000:03:00.0: reg 0x1c: [io 0xe480-0xe483] [ 0.102832] pci 0000:03:00.0: reg 0x20: [io 0xe400-0xe40f] [ 0.102843] pci 0000:03:00.0: reg 0x24: [mem 0xfebffc00-0xfebffdff] [ 0.102912] pci 0000:03:00.0: supports D1 [ 0.102913] pci 0000:03:00.0: PME# supported from D0 D1 D3hot [ 0.102975] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.102983] pci 0000:00:1c.4: PCI bridge to [bus 03] [ 0.102986] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff] [ 0.102990] pci 0000:00:1c.4: bridge window [mem 0xfeb00000-0xfebfffff] [ 0.103051] pci 0000:02:00.0: [1969:1026] type 00 class 0x020000 [ 0.103082] pci 0000:02:00.0: reg 0x10: [mem 0xfeac0000-0xfeafffff 64bit] [ 0.103094] pci 0000:02:00.0: reg 0x18: [io 0xdc00-0xdc7f] [ 0.103195] pci 0000:02:00.0: PME# supported from D3hot D3cold [ 0.103258] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.103266] pci 0000:00:1c.5: PCI bridge to [bus 02] [ 0.103269] pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff] [ 0.103273] pci 0000:00:1c.5: bridge window [mem 0xfea00000-0xfeafffff] [ 0.103344] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode) [ 0.103352] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.103353] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.103355] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.103357] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode) [ 0.103359] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xffffffff window] (subtractive decode) [ 0.104408] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.104510] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.104611] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.104712] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.104812] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.104913] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.105014] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15) [ 0.105115] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.105543] SCSI subsystem initialized [ 0.105572] libata version 3.00 loaded. [ 0.105572] pci 0000:01:00.0: vgaarb: setting as boot VGA device [ 0.105572] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.105572] pci 0000:01:00.0: vgaarb: bridge control possible [ 0.105572] vgaarb: loaded [ 0.105572] ACPI: bus type USB registered [ 0.105572] usbcore: registered new interface driver usbfs [ 0.105572] usbcore: registered new interface driver hub [ 0.105572] usbcore: registered new device driver usb [ 0.105572] EDAC MC: Ver: 3.0.0 [ 0.108054] PCI: Using ACPI for IRQ routing [ 0.111374] PCI: pci_cache_line_size set to 64 bytes [ 0.111425] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff] [ 0.111427] e820: reserve RAM buffer [mem 0xcff80000-0xcfffffff] [ 0.112016] NetLabel: Initializing [ 0.112016] NetLabel: domain hash size = 128 [ 0.112016] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.112016] NetLabel: unlabeled traffic allowed by default [ 0.112590] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.112594] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.112600] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.116046] clocksource: Switched to clocksource hpet [ 0.133754] VFS: Disk quotas dquot_6.6.0 [ 0.133778] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.133939] AppArmor: AppArmor Filesystem Enabled [ 0.133981] pnp: PnP ACPI init [ 0.134106] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved [ 0.134113] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.134220] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.134541] system 00:02: [io 0x0290-0x029f] has been reserved [ 0.134547] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.134798] system 00:03: [io 0x04d0-0x04d1] has been reserved [ 0.134800] system 00:03: [io 0x0800-0x087f] has been reserved [ 0.134802] system 00:03: [io 0x0500-0x057f] has been reserved [ 0.134805] system 00:03: [mem 0xfed08000-0xfed08fff] has been reserved [ 0.134807] system 00:03: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.134809] system 00:03: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.134812] system 00:03: [mem 0xfed50000-0xfed8ffff] has been reserved [ 0.134817] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.134998] system 00:04: [mem 0xffc00000-0xffefffff] has been reserved [ 0.135003] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.135236] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.135238] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.135244] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.135645] pnp 00:06: [dma 0 disabled] [ 0.135725] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.135823] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved [ 0.135828] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.136129] system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.136131] system 00:08: [mem 0x000c0000-0x000cffff] could not be reserved [ 0.136134] system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.136136] system 00:08: [mem 0x00100000-0xcfffffff] could not be reserved [ 0.136142] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.136363] pnp: PnP ACPI: found 9 devices [ 0.144958] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.144978] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000 [ 0.144981] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 400000 add_align 100000 [ 0.144988] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000 [ 0.145001] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000 [ 0.145015] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf0000000-0xf03fffff] [ 0.145020] pci 0000:00:1c.4: BAR 15: assigned [mem 0xf0400000-0xf05fffff 64bit pref] [ 0.145025] pci 0000:00:1c.5: BAR 15: assigned [mem 0xf0600000-0xf07fffff 64bit pref] [ 0.145027] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff] [ 0.145031] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.145033] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff] [ 0.145036] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfe9fffff] [ 0.145039] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.145043] pci 0000:00:1c.0: PCI bridge to [bus 04] [ 0.145045] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 0.145049] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf03fffff] [ 0.145052] pci 0000:00:1c.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref] [ 0.145057] pci 0000:00:1c.4: PCI bridge to [bus 03] [ 0.145059] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff] [ 0.145063] pci 0000:00:1c.4: bridge window [mem 0xfeb00000-0xfebfffff] [ 0.145066] pci 0000:00:1c.4: bridge window [mem 0xf0400000-0xf05fffff 64bit pref] [ 0.145071] pci 0000:00:1c.5: PCI bridge to [bus 02] [ 0.145074] pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff] [ 0.145077] pci 0000:00:1c.5: bridge window [mem 0xfea00000-0xfeafffff] [ 0.145081] pci 0000:00:1c.5: bridge window [mem 0xf0600000-0xf07fffff 64bit pref] [ 0.145086] pci 0000:00:1e.0: PCI bridge to [bus 05] [ 0.145096] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.145098] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.145100] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.145101] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.145103] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xffffffff window] [ 0.145105] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff] [ 0.145107] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfe9fffff] [ 0.145108] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.145110] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff] [ 0.145112] pci_bus 0000:04: resource 1 [mem 0xf0000000-0xf03fffff] [ 0.145114] pci_bus 0000:04: resource 2 [mem 0xf8f00000-0xf8ffffff 64bit pref] [ 0.145116] pci_bus 0000:03: resource 0 [io 0xe000-0xefff] [ 0.145117] pci_bus 0000:03: resource 1 [mem 0xfeb00000-0xfebfffff] [ 0.145119] pci_bus 0000:03: resource 2 [mem 0xf0400000-0xf05fffff 64bit pref] [ 0.145121] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] [ 0.145123] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff] [ 0.145124] pci_bus 0000:02: resource 2 [mem 0xf0600000-0xf07fffff 64bit pref] [ 0.145126] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7 window] [ 0.145128] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff window] [ 0.145130] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.145131] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.145133] pci_bus 0000:05: resource 8 [mem 0xd0000000-0xffffffff window] [ 0.145237] NET: Registered protocol family 2 [ 0.145559] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.145744] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.146007] TCP: Hash tables configured (established 65536 bind 65536) [ 0.146077] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.146121] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.146237] NET: Registered protocol family 1 [ 0.147714] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.147722] PCI: CLS 32 bytes, default 64 [ 0.147789] Unpacking initramfs... [ 1.132990] Freeing initrd memory: 54432K [ 1.132997] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.133001] software IO TLB [mem 0xcbf80000-0xcff80000] (64MB) mapped at [ (ptrval)- (ptrval)] [ 1.133283] Scanning for low memory corruption every 60 seconds [ 1.134056] Initialise system trusted keyrings [ 1.134069] Key type blacklist registered [ 1.134175] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 1.136060] zbud: loaded [ 1.136689] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.136929] fuse init (API version 7.26) [ 1.140520] Key type asymmetric registered [ 1.140522] Asymmetric key parser 'x509' registered [ 1.140571] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 1.140661] io scheduler noop registered [ 1.140662] io scheduler deadline registered [ 1.140729] io scheduler cfq registered (default) [ 1.141154] pcieport 0000:00:1c.0: enabling device (0106 -> 0107) [ 1.141765] vesafb: mode is 1280x1024x32, linelength=5120, pages=0 [ 1.141766] vesafb: scrolling: redraw [ 1.141768] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.141783] vesafb: framebuffer at 0xfb000000, mapped to 0x (ptrval), using 5120k, total 5120k [ 1.141910] Console: switching to colour frame buffer device 160x64 [ 1.141947] fb0: VESA VGA frame buffer device [ 1.141966] intel_idle: does not run on family 6 model 23 [ 1.142075] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.142086] ACPI: Power Button [PWRB] [ 1.142137] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.142186] ACPI: Power Button [PWRF] [ 1.142871] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.163283] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.166635] Linux agpgart interface v0.103 [ 1.169044] loop: module loaded [ 1.169211] ata_piix 0000:00:1f.2: version 2.13 [ 1.169347] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 1.171134] scsi host0: ata_piix [ 1.171249] scsi host1: ata_piix [ 1.171294] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xff90 irq 14 [ 1.171298] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xff98 irq 15 [ 1.171417] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 1.172707] scsi host2: ata_piix [ 1.172862] scsi host3: ata_piix [ 1.172913] ata3: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 19 [ 1.172915] ata4: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 19 [ 1.173083] libphy: Fixed MDIO Bus: probed [ 1.173084] tun: Universal TUN/TAP device driver, 1.6 [ 1.173148] PPP generic driver version 2.4.2 [ 1.173227] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.173234] ehci-pci: EHCI PCI platform driver [ 1.173376] ehci-pci 0000:00:1a.7: EHCI Host Controller [ 1.173384] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 1.173396] ehci-pci 0000:00:1a.7: debug port 1 [ 1.177300] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported [ 1.177312] ehci-pci 0000:00:1a.7: irq 18, io mem 0xf9fffc00 [ 1.192014] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 1.192069] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.192072] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.192074] usb usb1: Product: EHCI Host Controller [ 1.192076] usb usb1: Manufacturer: Linux 4.15.0-39-generic ehci_hcd [ 1.192078] usb usb1: SerialNumber: 0000:00:1a.7 [ 1.192240] hub 1-0:1.0: USB hub found [ 1.192249] hub 1-0:1.0: 6 ports detected [ 1.192534] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 1.192542] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 1.192552] ehci-pci 0000:00:1d.7: debug port 1 [ 1.196465] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported [ 1.196476] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf9fff800 [ 1.212020] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.212067] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.212069] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.212071] usb usb2: Product: EHCI Host Controller [ 1.212073] usb usb2: Manufacturer: Linux 4.15.0-39-generic ehci_hcd [ 1.212075] usb usb2: SerialNumber: 0000:00:1d.7 [ 1.212207] hub 2-0:1.0: USB hub found [ 1.212218] hub 2-0:1.0: 6 ports detected [ 1.212393] ehci-platform: EHCI generic platform driver [ 1.212410] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.212420] ohci-pci: OHCI PCI platform driver [ 1.212433] ohci-platform: OHCI generic platform driver [ 1.212442] uhci_hcd: USB Universal Host Controller Interface driver [ 1.212543] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 1.212550] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 1.212556] uhci_hcd 0000:00:1a.0: detected 2 ports [ 1.212581] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800 [ 1.212627] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.212629] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.212631] usb usb3: Product: UHCI Host Controller [ 1.212632] usb usb3: Manufacturer: Linux 4.15.0-39-generic uhci_hcd [ 1.212634] usb usb3: SerialNumber: 0000:00:1a.0 [ 1.212764] hub 3-0:1.0: USB hub found [ 1.212771] hub 3-0:1.0: 2 ports detected [ 1.212971] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 1.212977] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 1.212983] uhci_hcd 0000:00:1a.1: detected 2 ports [ 1.213005] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880 [ 1.213054] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.213056] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.213058] usb usb4: Product: UHCI Host Controller [ 1.213060] usb usb4: Manufacturer: Linux 4.15.0-39-generic uhci_hcd [ 1.213061] usb usb4: SerialNumber: 0000:00:1a.1 [ 1.213189] hub 4-0:1.0: USB hub found [ 1.213199] hub 4-0:1.0: 2 ports detected [ 1.213389] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 1.213398] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 1.213403] uhci_hcd 0000:00:1a.2: detected 2 ports [ 1.213420] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000bc00 [ 1.213465] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.213467] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.213469] usb usb5: Product: UHCI Host Controller [ 1.213470] usb usb5: Manufacturer: Linux 4.15.0-39-generic uhci_hcd [ 1.213472] usb usb5: SerialNumber: 0000:00:1a.2 [ 1.213597] hub 5-0:1.0: USB hub found [ 1.213604] hub 5-0:1.0: 2 ports detected [ 1.213794] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.213800] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 1.213806] uhci_hcd 0000:00:1d.0: detected 2 ports [ 1.213822] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080 [ 1.213869] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.213871] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.213873] usb usb6: Product: UHCI Host Controller [ 1.213874] usb usb6: Manufacturer: Linux 4.15.0-39-generic uhci_hcd [ 1.213876] usb usb6: SerialNumber: 0000:00:1d.0 [ 1.213998] hub 6-0:1.0: USB hub found [ 1.214004] hub 6-0:1.0: 2 ports detected [ 1.214196] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.214202] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 1.214208] uhci_hcd 0000:00:1d.1: detected 2 ports [ 1.214225] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400 [ 1.214272] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.214274] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.214276] usb usb7: Product: UHCI Host Controller [ 1.214277] usb usb7: Manufacturer: Linux 4.15.0-39-generic uhci_hcd [ 1.214279] usb usb7: SerialNumber: 0000:00:1d.1 [ 1.214401] hub 7-0:1.0: USB hub found [ 1.214408] hub 7-0:1.0: 2 ports detected [ 1.214597] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.214603] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 1.214608] uhci_hcd 0000:00:1d.2: detected 2 ports [ 1.214625] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480 [ 1.214672] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.214674] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.214676] usb usb8: Product: UHCI Host Controller [ 1.214678] usb usb8: Manufacturer: Linux 4.15.0-39-generic uhci_hcd [ 1.214679] usb usb8: SerialNumber: 0000:00:1d.2 [ 1.214800] hub 8-0:1.0: USB hub found [ 1.214806] hub 8-0:1.0: 2 ports detected [ 1.214971] i8042: PNP: No PS/2 controller found. [ 1.214972] i8042: Probing ports directly. [ 1.217771] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.217776] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.217972] mousedev: PS/2 mouse device common for all mice [ 1.218215] rtc_cmos 00:01: RTC can wake from S4 [ 1.218357] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 1.218382] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.218391] i2c /dev entries driver [ 1.218398] pcie_mp2_amd: AMD(R) PCI-E MP2 Communication Driver Version: 1.0 [ 1.218490] device-mapper: uevent: version 1.0.3 [ 1.218607] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com [ 1.218699] ledtrig-cpu: registered to indicate activity on CPUs [ 1.219166] NET: Registered protocol family 10 [ 1.224430] Segment Routing with IPv6 [ 1.224458] NET: Registered protocol family 17 [ 1.224537] Key type dns_resolver registered [ 1.224888] RAS: Correctable Errors collector initialized. [ 1.224929] microcode: sig=0x1067a, pf=0x10, revision=0xa0b [ 1.225032] microcode: Microcode Update Driver: v2.2. [ 1.225047] sched_clock: Marking stable (1225020707, 0)->(1320633932, -95613225) [ 1.225426] registered taskstats version 1 [ 1.225437] Loading compiled-in X.509 certificates [ 1.229074] Loaded X.509 cert 'Build time autogenerated kernel key: b6bf907933a495504ab8d1400074f4a81bd9957f' [ 1.229104] zswap: loaded using pool lzo/zbud [ 1.233866] Key type big_key registered [ 1.233872] Key type trusted registered [ 1.236194] Key type encrypted registered [ 1.236197] AppArmor: AppArmor sha1 policy hashing enabled [ 1.236200] ima: No TPM chip found, activating TPM-bypass! (rc=-19) [ 1.236206] ima: Allocated hash algorithm: sha1 [ 1.236231] evm: HMAC attrs: 0x1 [ 1.236558] Magic number: 14:500:727 [ 1.236591] block loop7: hash matches [ 1.236741] rtc_cmos 00:01: setting system clock to 2018-12-11 09:43:51 UTC (1544521431) [ 1.238194] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.238195] EDD information not available. [ 1.496837] ata4: SATA link down (SStatus 0 SControl 300) [ 1.507413] ata3: SATA link down (SStatus 0 SControl 300) [ 1.528014] usb 1-2: new high-speed USB device number 2 using ehci-pci [ 1.684013] usb 8-1: new low-speed USB device number 2 using uhci_hcd [ 1.685980] usb 1-2: New USB device found, idVendor=058f, idProduct=6362 [ 1.685982] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.685985] usb 1-2: Product: Mass Storage Device [ 1.685987] usb 1-2: Manufacturer: Generic [ 1.685988] usb 1-2: SerialNumber: 058F312D81B1 [ 1.880030] usb 8-1: New USB device found, idVendor=1a2c, idProduct=2124 [ 1.880033] usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.880035] usb 8-1: Product: USB Keyboard [ 1.880037] usb 8-1: Manufacturer: SEM [ 1.956060] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.956072] ata1.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.956226] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.956237] ata2.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.988042] ata1.00: ATA-8: ST3320613AS, CC2J, max UDMA/133 [ 1.988044] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.988240] ata1.01: ATA-8: STM3500418AS, CC35, max UDMA/133 [ 1.988242] ata1.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 2.005826] ata2.00: ATA-8: ST3320613AS, CC2J, max UDMA/133 [ 2.005828] ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 2.005836] ata2.01: ATAPI: HL-DT-ST DVDRAM GH22NS40, NL02, max UDMA/100 [ 2.037817] ata1.00: configured for UDMA/133 [ 2.042471] ata1.01: configured for UDMA/133 [ 2.042664] scsi 0:0:0:0: Direct-Access ATA ST3320613AS CC2J PQ: 0 ANSI: 5 [ 2.042908] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.042940] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 2.042955] sd 0:0:0:0: [sda] Write Protect is off [ 2.042957] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.042981] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.043096] scsi 0:0:1:0: Direct-Access ATA STM3500418AS CC35 PQ: 0 ANSI: 5 [ 2.043289] sd 0:0:1:0: Attached scsi generic sg1 type 0 [ 2.043300] sd 0:0:1:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 2.043320] sd 0:0:1:0: [sdb] Write Protect is off [ 2.043322] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.043362] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.050368] sda: sda1 [ 2.057718] ata2.00: configured for UDMA/133 [ 2.072863] sdb: sdb1 [ 2.073003] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.073169] sd 0:0:1:0: [sdb] Attached SCSI disk [ 2.080119] ata2.01: configured for UDMA/100 [ 2.085790] scsi 1:0:0:0: Direct-Access ATA ST3320613AS CC2J PQ: 0 ANSI: 5 [ 2.086020] sd 1:0:0:0: Attached scsi generic sg2 type 0 [ 2.086033] sd 1:0:0:0: [sdc] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 2.086051] sd 1:0:0:0: [sdc] Write Protect is off [ 2.086053] sd 1:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 2.086084] sd 1:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.089534] scsi 1:0:1:0: CD-ROM HL-DT-ST DVDRAM GH22NS40 NL02 PQ: 0 ANSI: 5 [ 2.140010] tsc: Refined TSC clocksource calibration: 2330.999 MHz [ 2.140017] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x219998e7852, max_idle_ns: 440795321153 ns [ 2.151794] sr 1:0:1:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.151796] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.151940] sr 1:0:1:0: Attached scsi CD-ROM sr0 [ 2.152038] sr 1:0:1:0: Attached scsi generic sg3 type 5 [ 2.191243] sdc: sdc1 < sdc5 > sdc2 sdc3 [ 2.191754] sd 1:0:0:0: [sdc] Attached SCSI disk [ 2.195609] Freeing unused kernel memory: 2408K [ 2.212021] Write protecting the kernel read-only data: 20480k [ 2.213006] Freeing unused kernel memory: 2008K [ 2.218726] Freeing unused kernel memory: 1884K [ 2.229175] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.229175] x86/mm: Checking user space page tables [ 2.239463] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.254244] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 2.254368] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 2.254385] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 2.353084] usb-storage 1-2:1.0: USB Mass Storage device detected [ 2.355915] scsi host4: usb-storage 1-2:1.0 [ 2.356036] scsi host5: pata_marvell [ 2.356060] usbcore: registered new interface driver usb-storage [ 2.357748] usbcore: registered new interface driver uas [ 2.360970] hidraw: raw HID events driver (C) Jiri Kosina [ 2.361145] scsi host6: pata_marvell [ 2.361220] ata5: PATA max UDMA/100 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 16 [ 2.361222] ata6: DUMMY [ 2.413311] usbcore: registered new interface driver usbhid [ 2.413312] usbhid: USB HID core driver [ 2.417971] ATL1E 0000:02:00.0 enp2s0: renamed from eth0 [ 2.418066] input: SEM USB Keyboard as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/0003:1A2C:2124.0001/input/input5 [ 2.435591] checking generic (fb000000 500000) vs hw (d0000000 10000000) [ 2.435593] checking generic (fb000000 500000) vs hw (fa000000 2000000) [ 2.435594] fb: switching to nouveaufb from VESA VGA [ 2.435626] Console: switching to colour dummy device 80x25 [ 2.435806] nouveau 0000:01:00.0: NVIDIA G98 (298200a2) [ 2.480176] hid-generic 0003:1A2C:2124.0001: input,hidraw0: USB HID v1.10 Keyboard [SEM USB Keyboard] on usb-0000:00:1d.2-1/input0 [ 2.480521] input: SEM USB Keyboard as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.1/0003:1A2C:2124.0002/input/input6 [ 2.544165] hid-generic 0003:1A2C:2124.0002: input,hidraw1: USB HID v1.10 Device [SEM USB Keyboard] on usb-0000:00:1d.2-1/input1 [ 2.550563] nouveau 0000:01:00.0: bios: version 62.98.3c.00.58 [ 2.572567] nouveau 0000:01:00.0: bios: M0203T not found [ 2.572569] nouveau 0000:01:00.0: bios: M0203E not matched! [ 2.572572] nouveau 0000:01:00.0: fb: 256 MiB DDR2 [ 2.748022] usb 8-2: new low-speed USB device number 3 using uhci_hcd [ 2.853813] random: fast init done [ 2.940038] usb 8-2: New USB device found, idVendor=046d, idProduct=c00c [ 2.940041] usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.940043] usb 8-2: Product: USB Mouse [ 2.940045] usb 8-2: Manufacturer: Logitech [ 2.957519] input: Logitech USB Mouse as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/0003:046D:C00C.0003/input/input7 [ 2.957629] hid-generic 0003:046D:C00C.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:1d.2-2/input0 [ 3.166382] clocksource: Switched to clocksource tsc [ 3.356746] scsi 4:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0 [ 3.357363] scsi 4:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0 [ 3.357986] scsi 4:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0 [ 3.358611] scsi 4:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0 [ 3.358921] sd 4:0:0:0: Attached scsi generic sg4 type 0 [ 3.359152] sd 4:0:0:1: Attached scsi generic sg5 type 0 [ 3.359371] sd 4:0:0:2: Attached scsi generic sg6 type 0 [ 3.359590] sd 4:0:0:3: Attached scsi generic sg7 type 0 [ 3.363610] sd 4:0:0:2: [sdf] Attached SCSI removable disk [ 3.364872] sd 4:0:0:0: [sdd] Attached SCSI removable disk [ 3.365492] sd 4:0:0:1: [sde] Attached SCSI removable disk [ 3.386737] sd 4:0:0:3: [sdg] Attached SCSI removable disk [ 3.732121] [TTM] Zone kernel: Available graphics memory: 4084000 kiB [ 3.732122] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 3.732123] [TTM] Initializing pool allocator [ 3.732130] [TTM] Initializing DMA pool allocator [ 3.732150] nouveau 0000:01:00.0: DRM: VRAM: 256 MiB [ 3.732151] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB [ 3.732156] nouveau 0000:01:00.0: DRM: TMDS table version 2.0 [ 3.732158] nouveau 0000:01:00.0: DRM: DCB version 4.0 [ 3.732161] nouveau 0000:01:00.0: DRM: DCB outp 00: 02000300 00000028 [ 3.732163] nouveau 0000:01:00.0: DRM: DCB outp 01: 01000302 00020030 [ 3.732165] nouveau 0000:01:00.0: DRM: DCB outp 02: 02021332 00020010 [ 3.732167] nouveau 0000:01:00.0: DRM: DCB outp 03: 04012310 00000028 [ 3.732169] nouveau 0000:01:00.0: DRM: DCB conn 00: 00001030 [ 3.732171] nouveau 0000:01:00.0: DRM: DCB conn 01: 00002161 [ 3.732173] nouveau 0000:01:00.0: DRM: DCB conn 02: 00000200 [ 3.733359] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.733360] [drm] Driver supports precise vblank timestamp query. [ 3.734854] nouveau 0000:01:00.0: DRM: MM: using M2MF for buffer copies [ 3.774572] nouveau 0000:01:00.0: DRM: allocated 1280x1024 fb: 0x50000, bo (ptrval) [ 3.776125] fbcon: nouveaufb (fb0) is primary device [ 3.776209] Console: switching to colour frame buffer device 160x64 [ 3.776249] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device [ 3.808033] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0 [ 3.974866] EXT4-fs (sdc2): mounted filesystem with ordered data mode. Opts: (null) [ 4.387838] random: crng init done [ 4.387841] random: 7 urandom warning(s) missed due to ratelimiting [ 5.029288] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN) [ 5.048131] systemd[1]: Detected architecture x86-64. [ 5.057543] systemd[1]: Set hostname to . [ 7.492796] systemd[1]: Listening on LVM2 poll daemon socket. [ 7.492916] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 7.493133] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 7.493191] systemd[1]: Listening on udev Control Socket. [ 7.493329] systemd[1]: Created slice System Slice. [ 7.493449] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 7.493545] systemd[1]: Listening on Journal Audit Socket. [ 8.650180] lp: driver loaded but no devices found [ 8.690926] ppdev: user-space parallel port driver [ 8.710648] EXT4-fs (sdc2): re-mounted. Opts: errors=remount-ro [ 8.979123] systemd-journald[299]: Received request to flush runtime journal from PID 1 [ 10.987943] ATK0110 ATK0110:00: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 11.101490] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 11.568591] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000084F (\PMRG) (20170831/utaddress-247) [ 11.568600] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 11.568602] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000053F (\GPS0) (20170831/utaddress-247) [ 11.568607] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 11.568608] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000053F (\GPS0) (20170831/utaddress-247) [ 11.568612] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 11.568613] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 11.701196] ACPI Warning: SystemIO range 0x0000000000000400-0x000000000000041F conflicts with OpRegion 0x0000000000000400-0x000000000000040F (\SMRG) (20170831/utaddress-247) [ 11.701204] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 12.135250] intel_powerclamp: No package C-state available [ 12.172323] intel_powerclamp: No package C-state available [ 12.220393] intel_powerclamp: No package C-state available [ 12.279954] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC1200: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 12.279957] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 12.279960] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 12.279961] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 12.279963] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x1e [ 12.279964] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 12.279967] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 [ 12.279969] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 [ 12.279971] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a [ 12.293776] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 12.293850] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 12.293918] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 12.293985] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 12.294051] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 12.294120] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 12.294187] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 12.294253] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 [ 18.464542] Adding 2103292k swap on /dev/sdc5. Priority:-2 extents:1 across:2103292k FS [ 19.570944] EXT4-fs (sdc3): mounted filesystem with ordered data mode. Opts: (null) [ 21.619508] audit: type=1400 audit(1544521451.877:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=853 comm="apparmor_parser" [ 21.619514] audit: type=1400 audit(1544521451.877:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=853 comm="apparmor_parser" [ 21.619519] audit: type=1400 audit(1544521451.877:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=853 comm="apparmor_parser" [ 21.619523] audit: type=1400 audit(1544521451.877:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=853 comm="apparmor_parser" [ 21.651706] audit: type=1400 audit(1544521451.909:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/mediascanner-service-2.0" pid=856 comm="apparmor_parser" [ 21.667904] audit: type=1400 audit(1544521451.925:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=852 comm="apparmor_parser" [ 21.667908] audit: type=1400 audit(1544521451.925:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=852 comm="apparmor_parser" [ 21.698800] audit: type=1400 audit(1544521451.957:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=854 comm="apparmor_parser" [ 21.698808] audit: type=1400 audit(1544521451.957:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince//sanitized_helper" pid=854 comm="apparmor_parser" [ 21.698812] audit: type=1400 audit(1544521451.957:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=854 comm="apparmor_parser" [ 28.247332] rfkill: input handler disabled [ 29.325494] Bluetooth: Core ver 2.22 [ 29.325522] NET: Registered protocol family 31 [ 29.325523] Bluetooth: HCI device and connection manager initialized [ 29.325528] Bluetooth: HCI socket layer initialized [ 29.325531] Bluetooth: L2CAP socket layer initialized [ 29.325538] Bluetooth: SCO socket layer initialized [ 32.685514] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [ 32.685799] ATL1E 0000:02:00.0 enp2s0: NIC Link is Up <100 Mbps Full Duplex> [ 32.685883] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [ 32.685889] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready [ 70.243971] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 70.243973] Bluetooth: BNEP filters: protocol multicast [ 70.243978] Bluetooth: BNEP socket layer initialized [ 79.565069] kauditd_printk_skb: 21 callbacks suppressed [ 79.565071] audit: type=1400 audit(1544521506.090:33): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/6034/usr/lib/snapd/snap-confine" pid=2327 comm="apparmor_parser" [ 79.565418] audit: type=1400 audit(1544521506.090:34): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/6034/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=2327 comm="apparmor_parser" [ 79.770191] audit: type=1400 audit(1544521506.294:35): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.core.hook.configure" pid=2330 comm="apparmor_parser" [ 79.789697] audit: type=1400 audit(1544521506.314:36): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.core" pid=2332 comm="apparmor_parser" [ 79.932020] audit: type=1400 audit(1544521506.454:37): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.sftpclient" pid=2338 comm="apparmor_parser" [ 79.937317] audit: type=1400 audit(1544521506.462:38): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.sftpclient.sftpclient" pid=2339 comm="apparmor_parser" [ 81.530775] audit: type=1400 audit(1544521508.054:39): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/snap/core/6034/usr/lib/snapd/snap-confine" pid=2358 comm="apparmor_parser" [ 81.552187] audit: type=1400 audit(1544521508.078:40): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/snap/core/6034/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=2358 comm="apparmor_parser" [ 81.560320] audit: type=1400 audit(1544521508.086:41): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.core" pid=2360 comm="apparmor_parser" [ 81.561784] audit: type=1400 audit(1544521508.086:42): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.core.hook.configure" pid=2361 comm="apparmor_parser" [ 110.335251] kauditd_printk_skb: 2 callbacks suppressed [ 110.335253] audit: type=1400 audit(1544521536.859:45): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.sftpclient.sftpclient" pid=2638 comm="apparmor_parser" [ 110.341616] audit: type=1400 audit(1544521536.867:46): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.sftpclient" pid=2641 comm="apparmor_parser" [ 110.434169] audit: type=1400 audit(1544521536.959:47): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/6034/usr/lib/snapd/snap-confine" pid=2647 comm="apparmor_parser" [ 110.434176] audit: type=1400 audit(1544521536.959:48): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/6034/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=2647 comm="apparmor_parser" [ 110.441652] audit: type=1400 audit(1544521536.967:49): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap-update-ns.core" pid=2649 comm="apparmor_parser" [ 110.443229] audit: type=1400 audit(1544521536.967:50): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.core.hook.configure" pid=2650 comm="apparmor_parser" [ 191.677946] perf: interrupt took too long (2503 > 2500), lowering kernel.perf_event_max_sample_rate to 79750 [ 229.800461] usb usb8-port1: disabled by hub (EMI?), re-enabling... [ 229.800469] usb 8-1: USB disconnect, device number 2 [ 230.216454] usb 8-1: new low-speed USB device number 4 using uhci_hcd [ 230.416134] usb 8-1: New USB device found, idVendor=1a2c, idProduct=2124 [ 230.416137] usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 230.416139] usb 8-1: Product: USB Keyboard [ 230.416140] usb 8-1: Manufacturer: SEM [ 230.432752] input: SEM USB Keyboard as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/0003:1A2C:2124.0004/input/input16 [ 230.492943] hid-generic 0003:1A2C:2124.0004: input,hidraw0: USB HID v1.10 Keyboard [SEM USB Keyboard] on usb-0000:00:1d.2-1/input0 [ 230.504704] input: SEM USB Keyboard as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.1/0003:1A2C:2124.0005/input/input17 [ 230.564694] hid-generic 0003:1A2C:2124.0005: input,hidraw1: USB HID v1.10 Device [SEM USB Keyboard] on usb-0000:00:1d.2-1/input1 [ 326.163177] perf: interrupt took too long (3130 > 3128), lowering kernel.perf_event_max_sample_rate to 63750 [ 3194.273211] perf: interrupt took too long (3922 > 3912), lowering kernel.perf_event_max_sample_rate to 50750 [ 6702.129508] audit: type=1400 audit(1544528128.729:51): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=17349 comm="apparmor_parser" [ 6702.130267] audit: type=1400 audit(1544528128.733:52): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=17349 comm="apparmor_parser" [ 6702.145983] audit: type=1400 audit(1544528128.749:53): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=17349 comm="apparmor_parser"