961522] usblp0: removed
[ 4246.033611] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4246.167827] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4246.173800] usblp0: removed
[ 4246.249575] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4246.381758] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4246.386744] usblp0: removed
[ 4246.457542] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4246.589692] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4246.595695] usblp0: removed
[ 4246.673479] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4246.805654] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4246.811636] usblp0: removed
[ 4246.886433] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4247.019607] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4247.025611] usblp0: removed
[ 4247.097384] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4247.229555] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4247.235535] usblp0: removed
[ 4247.309339] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4247.442513] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4247.447490] usblp0: removed
[ 4247.521289] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4247.656458] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4247.661454] usblp0: removed
[ 4247.733220] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4247.868398] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4247.873416] usblp0: removed
[ 4247.945178] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4248.078346] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4248.084362] usblp0: removed
[ 4248.157135] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4248.291298] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4248.296311] usblp0: removed
[ 4248.370083] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4248.501271] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4248.507333] usblp0: removed
[ 4248.582037] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4248.714209] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4248.719209] usblp0: removed
[ 4248.788992] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4248.923152] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4248.928381] usblp0: removed
[ 4249.001959] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4249.133119] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4249.138112] usblp0: removed
[ 4249.210031] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4249.341075] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4249.346342] usblp0: removed
[ 4249.417858] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4249.549029] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4249.555019] usblp0: removed
[ 4249.625814] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4249.756983] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4249.762970] usblp0: removed
[ 4249.833763] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4249.966944] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4249.972922] usblp0: removed
[ 4250.045708] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4250.178900] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4250.184951] usblp0: removed
[ 4250.259287] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4250.389828] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4250.395819] usblp0: removed
[ 4250.473619] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4250.608631] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4250.613771] usblp0: removed
[ 4250.685564] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4250.818726] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4250.823741] usblp0: removed
[ 4250.901515] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4251.034689] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4251.041925] usblp0: removed
[ 4251.116079] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4251.250624] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4251.255622] usblp0: removed
[ 4251.329491] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4251.463141] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4251.468586] usblp0: removed
[ 4251.541370] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4251.674551] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4251.679531] usblp0: removed
[ 4251.753313] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4251.884492] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4251.889503] usblp0: removed
[ 4251.961280] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4252.092728] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4252.098949] usblp0: removed
[ 4252.173211] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4252.310967] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4252.319432] usblp0: removed
[ 4252.393167] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4252.524462] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4252.527341] usblp0: removed
[ 4252.601133] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4252.742297] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4252.748292] usblp0: removed
[ 4252.822089] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4252.955248] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4252.961245] usblp0: removed
[ 4253.038039] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4253.171203] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4253.180241] usblp0: removed
[ 4253.253988] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4253.389139] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4253.394352] usblp0: removed
[ 4253.465932] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4253.599107] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4253.605066] usblp0: removed
[ 4253.677885] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4253.811054] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4253.816081] usblp0: removed
[ 4253.889835] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4254.022005] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4254.027169] usblp0: removed
[ 4254.100065] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4254.234962] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4254.239959] usblp0: removed
[ 4254.313737] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4254.447910] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4254.453900] usblp0: removed
[ 4254.525692] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4254.659858] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4254.664852] usblp0: removed
[ 4254.737640] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4254.871808] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4254.877807] usblp0: removed
[ 4254.949602] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4255.082788] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4255.088961] usblp0: removed
[ 4255.161557] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4255.292700] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4255.297713] usblp0: removed
[ 4255.369509] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4255.508291] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4255.513848] usblp0: removed
[ 4255.588445] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4255.722612] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4255.727602] usblp0: removed
[ 4255.805405] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4255.940549] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4255.945574] usblp0: removed
[ 4256.017366] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4256.152511] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4256.157688] usblp0: removed
[ 4256.229307] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4256.362464] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4256.367473] usblp0: removed
[ 4256.441262] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4256.573415] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4256.578406] usblp0: removed
[ 4256.649196] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4256.780354] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4256.785410] usblp0: removed
[ 4256.857168] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4256.992330] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4256.997537] usblp0: removed
[ 4257.069115] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4257.202297] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4257.207288] usblp0: removed
[ 4257.285064] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4257.418258] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4257.424272] usblp0: removed
[ 4257.500048] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4257.644237] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4257.652300] usblp0: removed
[ 4257.725967] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4257.859142] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4257.864150] usblp0: removed
[ 4257.937914] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4258.072141] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4258.077075] usblp0: removed
[ 4258.149864] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4258.283026] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4258.288057] usblp0: removed
[ 4258.361820] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4258.494969] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4258.499987] usblp0: removed
[ 4258.573768] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4258.710948] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4258.716923] usblp0: removed
[ 4258.788706] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4258.922891] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4258.927866] usblp0: removed
[ 4259.001671] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4259.138855] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4259.144822] usblp0: removed
[ 4259.221625] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4259.354791] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4259.359782] usblp0: removed
[ 4259.433588] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4259.570772] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4259.575742] usblp0: removed
[ 4259.653534] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4259.786700] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4259.791688] usblp0: removed
[ 4259.869481] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4260.002662] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4260.008628] usblp0: removed
[ 4260.080415] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4260.215597] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4260.220606] usblp0: removed
[ 4260.293391] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4260.426537] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4260.431566] usblp0: removed
[ 4260.509337] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4260.642477] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4260.647484] usblp0: removed
[ 4260.721290] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4260.856458] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4260.861435] usblp0: removed
[ 4260.933235] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4261.065395] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4261.070399] usblp0: removed
[ 4261.141195] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4261.278347] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4261.284361] usblp0: removed
[ 4261.361117] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4261.498279] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4261.503290] usblp0: removed
[ 4261.578087] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4261.713242] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4261.718250] usblp0: removed
[ 4261.790050] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4261.921206] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4261.926216] usblp0: removed
[ 4261.997993] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4262.140197] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4262.145153] usblp0: removed
[ 4262.217947] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4262.355091] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4262.364284] usblp0: removed
[ 4262.437893] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4262.575042] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4262.581043] usblp0: removed
[ 4262.653849] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4262.791066] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4262.796998] usblp0: removed
[ 4262.873786] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4263.008960] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4263.013943] usblp0: removed
[ 4263.085764] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4263.221898] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4263.227914] usblp0: removed
[ 4263.305698] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4263.441857] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4263.446858] usblp0: removed
[ 4263.517641] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4263.654798] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4263.659800] usblp0: removed
[ 4263.733581] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4263.870783] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4263.876940] usblp0: removed
[ 4263.949542] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4264.081714] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4264.086713] usblp0: removed
[ 4264.161516] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4264.297660] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4264.304300] usblp0: removed
[ 4264.377455] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4264.510618] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4264.516607] usblp0: removed
[ 4264.593389] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4264.725558] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4264.730551] usblp0: removed
[ 4264.805337] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4264.940514] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4264.945520] usblp0: removed
[ 4265.017286] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4265.150459] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4265.156462] usblp0: removed
[ 4265.233241] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4265.366399] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4265.371416] usblp0: removed
[ 4265.445203] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4265.579351] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4265.584372] usblp0: removed
[ 4265.657144] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4265.790301] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4265.795317] usblp0: removed
[ 4265.869088] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4266.001264] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4266.007286] usblp0: removed
[ 4266.082066] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4266.215207] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4266.220272] usblp0: removed
[ 4266.294001] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4266.425148] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4266.431187] usblp0: removed
[ 4266.501951] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4266.633101] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4266.639139] usblp0: removed
[ 4266.709908] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4266.842062] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4266.847085] usblp0: removed
[ 4266.917885] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4267.049087] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4267.055081] usblp0: removed
[ 4267.129806] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4267.263271] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4267.269356] usblp0: removed
[ 4267.341787] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4267.480184] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4267.485099] usblp0: removed
[ 4267.568066] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4267.706156] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4267.712190] usblp0: removed
[ 4267.785711] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4267.917824] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4267.922833] usblp0: removed
[ 4267.997630] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4268.128770] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4268.133786] usblp0: removed
[ 4268.205566] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4268.336723] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4268.341902] usblp0: removed
[ 4268.413523] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4268.548675] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4268.553689] usblp0: removed
[ 4268.625473] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4268.763644] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4268.769626] usblp0: removed
[ 4268.841427] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4268.974620] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4268.980584] usblp0: removed
[ 4269.061378] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4269.191564] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4269.196542] usblp0: removed
[ 4269.269349] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4269.400609] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4269.405560] usblp0: removed
[ 4269.477330] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4269.610473] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4269.615466] usblp0: removed
[ 4269.689238] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4269.821388] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4269.826405] usblp0: removed
[ 4269.901183] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4270.032332] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4270.037362] usblp0: removed
[ 4270.109138] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4270.242302] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4270.248303] usblp0: removed
[ 4270.322090] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4270.456263] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4270.461265] usblp0: removed
[ 4270.534041] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4270.674194] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4270.679209] usblp0: removed
[ 4270.753994] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4270.893143] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4270.898158] usblp0: removed
[ 4270.969943] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4271.103079] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4271.108158] usblp0: removed
[ 4271.182112] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4271.314046] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4271.319060] usblp0: removed
[ 4271.393842] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4271.527130] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4271.533042] usblp0: removed
[ 4271.605839] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4271.741020] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4271.747079] usblp0: removed
[ 4271.821774] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4271.953943] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4271.958917] usblp0: removed
[ 4272.032695] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4272.168885] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4272.173867] usblp0: removed
[ 4272.245672] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4272.376883] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4272.382853] usblp0: removed
[ 4272.453635] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4272.585766] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4272.590797] usblp0: removed
[ 4272.661567] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4272.793848] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4272.799834] usblp0: removed
[ 4272.873885] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4273.006660] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4273.011673] usblp0: removed
[ 4273.085462] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4273.218618] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4273.223629] usblp0: removed
[ 4273.297414] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4273.430550] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4273.436600] usblp0: removed
[ 4273.509362] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4273.641525] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4273.646540] usblp0: removed
[ 4273.721318] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4273.860247] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4273.865499] usblp0: removed
[ 4273.937268] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4274.076272] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4274.081449] usblp0: removed
[ 4274.157218] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4274.296379] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4274.301390] usblp0: removed
[ 4274.373170] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4274.509318] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4274.514335] usblp0: removed
[ 4274.589119] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4274.726264] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4274.731285] usblp0: removed
[ 4274.806071] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4274.941222] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4274.946239] usblp0: removed
[ 4275.022022] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4275.155160] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4275.160235] usblp0: removed
[ 4275.233999] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4275.371121] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4275.377136] usblp0: removed
[ 4275.449926] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4275.588146] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4275.593104] usblp0: removed
[ 4275.665865] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4275.807051] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4275.812092] usblp0: removed
[ 4275.885839] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4276.018974] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4276.023986] usblp0: removed
[ 4276.097795] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4276.230929] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4276.235948] usblp0: removed
[ 4276.309728] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4276.441877] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4276.446893] usblp0: removed
[ 4276.521675] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4276.654966] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4276.660913] usblp0: removed
[ 4276.733653] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4276.868801] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4276.873799] usblp0: removed
[ 4276.945591] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4277.086773] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4277.091751] usblp0: removed
[ 4277.165578] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4277.298686] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4277.303694] usblp0: removed
[ 4277.377485] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4277.514662] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4277.519667] usblp0: removed
[ 4277.593481] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4277.726605] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4277.742997] usblp0: removed
[ 4277.817386] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4277.950536] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4277.956546] usblp0: removed
[ 4278.033333] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4278.165488] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4278.170502] usblp0: removed
[ 4278.245289] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4278.379441] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4278.384459] usblp0: removed
[ 4278.457241] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4278.591382] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4278.596411] usblp0: removed
[ 4278.669203] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4278.802391] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4278.807345] usblp0: removed
[ 4278.881144] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4279.014274] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4279.020322] usblp0: removed
[ 4279.094122] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4279.228314] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4279.233271] usblp0: removed
[ 4279.306062] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4279.442335] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4279.448329] usblp0: removed
[ 4279.526643] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4279.659133] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4279.664224] usblp0: removed
[ 4279.741973] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4279.875107] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4279.880160] usblp0: removed
[ 4279.953898] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4280.091047] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4280.096117] usblp0: removed
[ 4280.169878] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4280.302144] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4280.308098] usblp0: removed
[ 4280.381829] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4280.515019] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4280.521064] usblp0: removed
[ 4280.593811] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4280.725909] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4280.730923] usblp0: removed
[ 4280.805705] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4280.941858] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4280.946871] usblp0: removed
[ 4281.021656] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4281.159808] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4281.164824] usblp0: removed
[ 4281.237610] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4281.370756] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4281.375776] usblp0: removed
[ 4281.449562] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4281.581714] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4281.587714] usblp0: removed
[ 4281.661519] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4281.802661] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4281.807676] usblp0: removed
[ 4281.881462] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4282.012677] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4282.018127] usblp0: removed
[ 4282.089439] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4282.222619] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4282.228685] usblp0: removed
[ 4282.301402] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4282.434553] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4282.439582] usblp0: removed
[ 4282.521315] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4282.656290] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4282.661487] usblp0: removed
[ 4282.737265] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4282.869533] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4282.875440] usblp0: removed
[ 4282.949231] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4283.084942] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4283.090394] usblp0: removed
[ 4283.162267] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4283.293450] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4283.299419] usblp0: removed
[ 4283.374154] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4283.512693] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4283.517573] usblp0: removed
[ 4283.590227] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4283.722240] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4283.727259] usblp0: removed
[ 4283.802044] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4283.935186] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4283.940258] usblp0: removed
[ 4284.014006] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4284.146210] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4284.152308] usblp0: removed
[ 4284.225922] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4284.360187] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4284.365116] usblp0: removed
[ 4284.438209] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4284.570166] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4284.576168] usblp0: removed
[ 4284.650089] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4284.781126] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4284.787009] usblp0: removed
[ 4284.857975] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4284.990938] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4284.996322] usblp0: removed
[ 4285.070464] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4285.203944] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4285.209924] usblp0: removed
[ 4285.281685] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4285.412841] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4285.417854] usblp0: removed
[ 4285.489637] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4285.621787] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4285.627801] usblp0: removed
[ 4285.701590] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4285.836748] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4285.841768] usblp0: removed
[ 4285.913552] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4286.044094] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4286.048731] usblp0: removed
[ 4286.125508] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4286.262663] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4286.267665] usblp0: removed
[ 4286.341448] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4286.479631] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4286.484637] usblp0: removed
[ 4286.557418] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4286.690535] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4286.696571] usblp0: removed
[ 4286.774361] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4286.910503] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4286.915517] usblp0: removed
[ 4286.989297] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4287.121459] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4287.126475] usblp0: removed
[ 4287.201262] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4287.332419] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4287.337440] usblp0: removed
[ 4287.409209] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4287.542391] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4287.547382] usblp0: removed
[ 4287.621161] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4287.754326] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4287.759338] usblp0: removed
[ 4287.838147] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4287.970310] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4287.975302] usblp0: removed
[ 4288.050097] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4288.182226] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4288.188282] usblp0: removed
[ 4288.262027] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4288.395161] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4288.401213] usblp0: removed
[ 4288.474011] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4288.606198] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4288.612311] usblp0: removed
[ 4288.685932] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4288.824120] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4288.829111] usblp0: removed
[ 4288.901887] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4289.035037] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4289.040101] usblp0: removed
[ 4289.113842] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4289.245972] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4289.252065] usblp0: removed
[ 4289.325796] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4289.459943] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4289.465949] usblp0: removed
[ 4289.541747] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4289.674937] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4289.679900] usblp0: removed
[ 4289.753750] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4289.884923] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4289.891177] usblp0: removed
[ 4289.961680] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4290.094807] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4290.099818] usblp0: removed
[ 4290.173607] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4290.309763] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4290.314792] usblp0: removed
[ 4290.385558] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4290.517716] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4290.522730] usblp0: removed
[ 4290.597548] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4290.728663] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4290.733689] usblp0: removed
[ 4290.805465] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4290.941620] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4290.946629] usblp0: removed
[ 4291.021414] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4291.154654] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4291.160684] usblp0: removed
[ 4291.233386] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4291.371522] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4291.376539] usblp0: removed
[ 4291.449325] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4291.581479] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4291.587481] usblp0: removed
[ 4291.661283] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4291.794412] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4291.799457] usblp0: removed
[ 4291.873273] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4292.005388] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4292.010399] usblp0: removed
[ 4292.085190] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4292.219666] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4292.225438] usblp0: removed
[ 4292.298194] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4292.437340] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4292.442302] usblp0: removed
[ 4292.517085] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4292.651228] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4292.657290] usblp0: removed
[ 4292.730042] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4292.864273] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4292.869218] usblp0: removed
[ 4292.950058] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4293.083223] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4293.089261] usblp0: removed
[ 4293.162004] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4293.294099] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4293.300145] usblp0: removed
[ 4293.373904] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4293.506078] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4293.516269] usblp0: removed
[ 4293.589855] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4293.723041] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4293.728096] usblp0: removed
[ 4293.801829] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4293.935953] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4293.941970] usblp0: removed
[ 4294.017757] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4294.151944] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4294.157925] usblp0: removed
[ 4294.229713] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4294.362866] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4294.367876] usblp0: removed
[ 4294.441649] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4294.575820] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4294.581877] usblp0: removed
[ 4294.653620] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4294.785830] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4294.791777] usblp0: removed
[ 4294.865571] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4294.999714] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4295.004755] usblp0: removed
[ 4295.077568] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4295.210697] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4295.215706] usblp0: removed
[ 4295.288476] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4295.422641] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4295.427642] usblp0: removed
[ 4295.501435] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4295.634590] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4295.639595] usblp0: removed
[ 4295.713377] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4295.850540] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4295.855551] usblp0: removed
[ 4295.929332] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4296.067480] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4296.072504] usblp0: removed
[ 4296.145294] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4296.278449] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4296.284457] usblp0: removed
[ 4296.361238] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4296.494396] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4296.499406] usblp0: removed
[ 4296.573195] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4296.706329] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4296.711382] usblp0: removed
[ 4296.785200] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4296.919300] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4296.924317] usblp0: removed
[ 4296.997083] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4297.130251] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4297.136285] usblp0: removed
[ 4297.210054] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4297.343205] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4297.348263] usblp0: removed
[ 4297.422008] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4297.559165] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4297.564215] usblp0: removed
[ 4297.637955] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4297.770114] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4297.775124] usblp0: removed
[ 4297.849934] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4297.983147] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4297.989116] usblp0: removed
[ 4298.065862] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4298.200052] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4298.205054] usblp0: removed
[ 4298.277823] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4298.409972] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4298.415976] usblp0: removed
[ 4298.489771] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4298.622933] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4298.627950] usblp0: removed
[ 4298.705739] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4298.841880] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4298.846890] usblp0: removed
[ 4298.921660] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4299.060828] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4299.065841] usblp0: removed
[ 4299.137629] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4299.270826] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4299.276811] usblp0: removed
[ 4299.349599] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4299.486728] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4299.491748] usblp0: removed
[ 4299.565534] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4299.697668] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4299.703716] usblp0: removed
[ 4299.777488] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4299.910672] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4299.920271] usblp0: removed
[ 4299.993430] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4300.126592] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4300.131608] usblp0: removed
[ 4300.205388] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4300.337553] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4300.342570] usblp0: removed
[ 4300.417352] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4300.550499] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4300.555514] usblp0: removed
[ 4300.629301] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4300.760827] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4300.766470] usblp0: removed
[ 4300.837296] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4300.970395] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4300.976433] usblp0: removed
[ 4301.053232] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4301.185358] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4301.190382] usblp0: removed
[ 4301.265156] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4301.398339] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4301.408239] usblp0: removed
[ 4301.482105] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4301.614259] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4301.619278] usblp0: removed
[ 4301.698054] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4301.830198] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4301.835225] usblp0: removed
[ 4301.910009] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4302.043157] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4302.048216] usblp0: removed
[ 4302.121963] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4302.255124] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4302.261146] usblp0: removed
[ 4302.337922] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4302.471101] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4302.476149] usblp0: removed
[ 4302.549875] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4302.681039] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4302.686060] usblp0: removed
[ 4302.757826] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4302.889029] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4302.895020] usblp0: removed
[ 4302.965799] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4303.102951] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4303.107949] usblp0: removed
[ 4303.181738] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4303.312078] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4303.316950] usblp0: removed
[ 4303.389702] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4303.522847] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4303.528857] usblp0: removed
[ 4303.601641] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4303.733827] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4303.738810] usblp0: removed
[ 4303.809691] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4303.942756] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4303.948763] usblp0: removed
[ 4304.021554] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4304.150825] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4304.156988] usblp0: removed
[ 4304.233961] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4304.367657] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4304.372679] usblp0: removed
[ 4304.445458] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4304.576621] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4304.581630] usblp0: removed
[ 4304.660071] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4304.794571] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4304.799577] usblp0: removed
[ 4304.873362] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4305.005539] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4305.010525] usblp0: removed
[ 4305.092069] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4305.223605] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4305.229512] usblp0: removed
[ 4305.305304] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4305.438430] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4305.443437] usblp0: removed
[ 4305.517225] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4305.650399] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4305.655386] usblp0: removed
[ 4305.729179] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4305.863466] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4305.869444] usblp0: removed
[ 4305.941129] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4306.075285] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4306.081284] usblp0: removed
[ 4306.158082] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4306.291361] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4306.301275] usblp0: removed
[ 4306.378033] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4306.513495] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4306.519444] usblp0: removed
[ 4306.597998] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4306.738270] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4306.744265] usblp0: removed
[ 4306.817960] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4306.961082] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4306.966110] usblp0: removed
[ 4307.037887] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4307.173044] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4307.178057] usblp0: removed
[ 4307.249841] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4307.388093] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4307.393027] usblp0: removed
[ 4307.467770] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4307.601947] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4307.606958] usblp0: removed
[ 4307.681743] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4307.815048] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4307.820918] usblp0: removed
[ 4307.893722] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4308.031852] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4308.036860] usblp0: removed
[ 4308.109650] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4308.247405] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4308.252825] usblp0: removed
[ 4308.325610] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4308.460871] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4308.466789] usblp0: removed
[ 4308.537577] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4308.679707] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4308.685710] usblp0: removed
[ 4308.757506] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4308.891996] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4308.897791] usblp0: removed
[ 4308.973471] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4309.110613] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4309.115627] usblp0: removed
[ 4309.189408] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4309.323700] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4309.329674] usblp0: removed
[ 4309.401388] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4309.537526] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4309.542530] usblp0: removed
[ 4309.617317] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4309.751462] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4309.756482] usblp0: removed
[ 4309.833269] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4309.969774] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4309.975693] usblp0: removed
[ 4310.049236] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4310.183372] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4310.188390] usblp0: removed
[ 4310.261174] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4310.392365] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4310.397390] usblp0: removed
[ 4310.469147] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4310.612281] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4310.617305] usblp0: removed
[ 4310.689079] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4310.822260] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4310.827242] usblp0: removed
[ 4310.902041] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4311.035217] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4311.040239] usblp0: removed
[ 4311.114010] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4311.246165] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4311.256272] usblp0: removed
[ 4311.329949] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4311.463130] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4311.468155] usblp0: removed
[ 4311.541895] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4311.678261] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4311.684752] usblp0: removed
[ 4311.757877] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4311.891999] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4311.896321] usblp0: removed
[ 4311.969795] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4312.104109] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4312.108973] usblp0: removed
[ 4312.181842] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4312.314905] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4312.319913] usblp0: removed
[ 4312.393709] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4312.527264] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4312.532875] usblp0: removed
[ 4312.605971] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4312.741814] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4312.746825] usblp0: removed
[ 4312.821612] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4312.960275] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4312.964791] usblp0: removed
[ 4313.041562] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4313.174776] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4313.181162] usblp0: removed
[ 4313.253525] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4313.392673] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4313.397685] usblp0: removed
[ 4313.469467] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4313.602687] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4313.608932] usblp0: removed
[ 4313.681440] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4313.815588] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4313.821588] usblp0: removed
[ 4313.897365] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4314.031537] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4314.036539] usblp0: removed
[ 4314.109314] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4314.243475] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4314.248488] usblp0: removed
[ 4314.321286] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4314.454431] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4314.459464] usblp0: removed
[ 4314.533249] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4314.666379] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4314.671413] usblp0: removed
[ 4314.745174] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4314.879368] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4314.884370] usblp0: removed
[ 4314.957141] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4315.092285] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4315.102309] usblp0: removed
[ 4315.181573] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4315.317323] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4315.320411] usblp0: removed
[ 4315.394033] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4315.528289] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4315.531228] usblp0: removed
[ 4315.605990] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4315.741160] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4315.746178] usblp0: removed
[ 4315.817935] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4315.951095] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4315.956170] usblp0: removed
[ 4316.029901] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4316.163044] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4316.168115] usblp0: removed
[ 4316.241843] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4316.376077] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4316.379031] usblp0: removed
[ 4316.449796] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4316.584279] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4316.586987] usblp0: removed
[ 4316.657754] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4316.794006] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4316.796927] usblp0: removed
[ 4316.869830] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4317.004893] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4317.009965] usblp0: removed
[ 4317.081681] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4317.213853] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4317.218841] usblp0: removed
[ 4317.289758] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4317.424954] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4317.427805] usblp0: removed
[ 4317.502583] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4317.634712] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4317.639880] usblp0: removed
[ 4317.713520] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4317.845662] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4317.850773] usblp0: removed
[ 4317.932075] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4318.067799] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4318.073664] usblp0: removed
[ 4318.149640] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4318.283656] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4318.290028] usblp0: removed
[ 4318.365374] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4318.499765] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4318.505566] usblp0: removed
[ 4318.578348] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4318.712504] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4318.717503] usblp0: removed
[ 4318.789691] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4318.924594] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4318.927478] usblp0: removed
[ 4319.001236] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4319.135448] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4319.138433] usblp0: removed
[ 4319.209180] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4319.345473] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4319.348436] usblp0: removed
[ 4319.421144] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4319.554292] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4319.560429] usblp0: removed
[ 4319.633096] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4319.765240] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4319.771314] usblp0: removed
[ 4319.850048] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4319.983248] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4319.986240] usblp0: removed
[ 4320.058001] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4320.192272] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4320.195838] usblp0: removed
[ 4320.269954] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4320.404215] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4320.407153] usblp0: removed
[ 4320.477908] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4320.612160] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4320.615100] usblp0: removed
[ 4320.685854] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4320.819426] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4320.824120] usblp0: removed
[ 4320.897814] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4321.031384] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4321.035006] usblp0: removed
[ 4321.105769] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4321.238980] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4321.242961] usblp0: removed
[ 4321.313719] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4321.446950] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4321.450910] usblp0: removed
[ 4321.521670] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4321.654876] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4321.657877] usblp0: removed
[ 4321.729631] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4321.863856] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4321.866832] usblp0: removed
[ 4321.941583] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4322.077829] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4322.080766] usblp0: removed
[ 4322.153539] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4322.283701] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4322.288729] usblp0: removed
[ 4322.361489] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4322.494698] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4322.497688] usblp0: removed
[ 4322.569447] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4322.703663] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4322.706643] usblp0: removed
[ 4322.777389] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4322.910591] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4322.913594] usblp0: removed
[ 4322.989338] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4323.123581] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4323.126554] usblp0: removed
[ 4323.197297] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4323.331514] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4323.334503] usblp0: removed
[ 4323.405261] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4323.539485] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4323.542568] usblp0: removed
[ 4323.613206] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4323.747440] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4323.750404] usblp0: removed
[ 4323.821167] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4323.955380] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4323.959363] usblp0: removed
[ 4324.033122] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4324.166332] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4324.169306] usblp0: removed
[ 4324.241080] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4324.378283] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4324.381256] usblp0: removed
[ 4324.454019] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4324.589280] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4324.592253] usblp0: removed
[ 4324.665980] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4324.799317] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4324.803177] usblp0: removed
[ 4324.873941] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4325.008198] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4325.011127] usblp0: removed
[ 4325.081892] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4325.216125] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4325.219079] usblp0: removed
[ 4325.289836] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4325.423988] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4325.429035] usblp0: removed
[ 4325.501801] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4325.637028] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4325.639987] usblp0: removed
[ 4325.713753] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4325.845136] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4325.850925] usblp0: removed
[ 4325.921711] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4326.058901] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4326.064890] usblp0: removed
[ 4326.141665] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4326.274863] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4326.280271] usblp0: removed
[ 4326.353619] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4326.485779] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4326.491778] usblp0: removed
[ 4326.565558] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4326.698790] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4326.704900] usblp0: removed
[ 4326.776505] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4326.909862] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4326.915684] usblp0: removed
[ 4326.993468] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4327.125628] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4327.131656] usblp0: removed
[ 4327.205425] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4327.338582] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4327.343604] usblp0: removed
[ 4327.417376] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4327.550594] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4327.556574] usblp0: removed
[ 4327.629331] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4327.762466] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4327.767522] usblp0: removed
[ 4327.845270] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4327.987461] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4327.993464] usblp0: removed
[ 4328.065232] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4328.197446] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4328.203409] usblp0: removed
[ 4328.277188] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4328.410380] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4328.416365] usblp0: removed
[ 4328.493140] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4328.627324] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4328.633338] usblp0: removed
[ 4328.709106] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4328.844287] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4328.849342] usblp0: removed
[ 4328.922051] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4329.055216] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4329.061226] usblp0: removed
[ 4329.133997] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4329.267241] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4329.273186] usblp0: removed
[ 4329.350004] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4329.483125] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4329.489156] usblp0: removed
[ 4329.561904] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4329.695086] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4329.700112] usblp0: removed
[ 4329.773872] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4329.907053] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4329.912073] usblp0: removed
[ 4329.989808] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4330.125043] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4330.127991] usblp0: removed
[ 4330.201762] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4330.334971] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4330.340935] usblp0: removed
[ 4330.413729] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4330.547900] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4330.552889] usblp0: removed
[ 4330.625685] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4330.758852] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4330.763837] usblp0: removed
[ 4330.841636] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4330.974809] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4330.979796] usblp0: removed
[ 4331.053572] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4331.186789] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4331.191779] usblp0: removed
[ 4331.265545] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4331.398738] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4331.404710] usblp0: removed
[ 4331.477498] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4331.611637] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4331.617644] usblp0: removed
[ 4331.693429] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4331.825587] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4331.830606] usblp0: removed
[ 4331.901386] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4332.034539] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4332.039566] usblp0: removed
[ 4332.113339] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4332.246495] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4332.252509] usblp0: removed
[ 4332.325292] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4332.458454] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4332.463467] usblp0: removed
[ 4332.537253] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4332.674409] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4332.679415] usblp0: removed
[ 4332.754203] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4332.886355] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4332.891363] usblp0: removed
[ 4332.965147] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4333.098329] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4333.103343] usblp0: removed
[ 4333.178120] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4333.313338] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4333.319305] usblp0: removed
[ 4333.394057] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4333.530246] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4333.536251] usblp0: removed
[ 4333.610010] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4333.745180] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4333.750182] usblp0: removed
[ 4333.826025] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4333.959128] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4333.964159] usblp0: removed
[ 4334.037929] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4334.172135] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4334.177110] usblp0: removed
[ 4334.249905] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4334.384050] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4334.389047] usblp0: removed
[ 4334.461848] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4334.594010] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4334.599011] usblp0: removed
[ 4334.673798] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4334.806960] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4334.812952] usblp0: removed
[ 4334.889751] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4335.022865] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4335.027894] usblp0: removed
[ 4335.101681] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4335.233826] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4335.238873] usblp0: removed
[ 4335.309624] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4335.443829] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4335.449827] usblp0: removed
[ 4335.525610] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4335.659772] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4335.664770] usblp0: removed
[ 4335.737536] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4335.872780] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4335.875730] usblp0: removed
[ 4335.949490] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4336.083671] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4336.086684] usblp0: removed
[ 4336.157435] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4336.291629] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4336.294632] usblp0: removed
[ 4336.365398] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4336.499584] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4336.502589] usblp0: removed
[ 4336.573344] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4336.707699] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4336.711540] usblp0: removed
[ 4336.786322] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4336.918505] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4336.923478] usblp0: removed
[ 4336.997528] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4337.129477] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4337.135612] usblp0: removed
[ 4337.213228] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4337.345350] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4337.350409] usblp0: removed
[ 4337.421173] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4337.553304] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4337.559362] usblp0: removed
[ 4337.637155] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4337.772305] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4337.777310] usblp0: removed
[ 4337.854090] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4337.987258] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4337.990253] usblp0: removed
[ 4338.062054] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4338.193205] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4338.200330] usblp0: removed
[ 4338.273985] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4338.407154] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4338.412184] usblp0: removed
[ 4338.485941] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4338.617118] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4338.622121] usblp0: removed
[ 4338.693891] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4338.825066] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4338.830250] usblp0: removed
[ 4338.901844] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4339.033080] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4339.039017] usblp0: removed
[ 4339.109815] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4339.244950] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4339.250992] usblp0: removed
[ 4339.321751] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4339.456086] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4339.458931] usblp0: removed
[ 4339.541701] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4339.674879] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4339.679870] usblp0: removed
[ 4339.757648] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4339.888859] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4339.894846] usblp0: removed
[ 4339.965603] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4340.096754] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4340.102789] usblp0: removed
[ 4340.173555] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4340.304734] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4340.309761] usblp0: removed
[ 4340.381536] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4340.512695] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4340.518670] usblp0: removed
[ 4340.597500] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4340.726734] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4340.732649] usblp0: removed
[ 4340.805455] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4340.937599] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4340.943588] usblp0: removed
[ 4341.017380] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4341.150554] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4341.156543] usblp0: removed
[ 4341.229320] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4341.360520] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4341.368454] usblp0: removed
[ 4341.441274] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4341.573422] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4341.578472] usblp0: removed
[ 4341.649226] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4341.782384] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4341.788502] usblp0: removed
[ 4341.861203] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4341.993352] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4341.999373] usblp0: removed
[ 4342.073145] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4342.205279] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4342.210338] usblp0: removed
[ 4342.281093] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4342.415264] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4342.420308] usblp0: removed
[ 4342.494051] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4342.626236] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4342.632257] usblp0: removed
[ 4342.706013] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4342.839143] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4342.844217] usblp0: removed
[ 4342.921946] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4343.055121] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4343.061134] usblp0: removed
[ 4343.133921] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4343.269066] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4343.274094] usblp0: removed
[ 4343.345855] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4343.487046] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4343.493831] usblp0: removed
[ 4343.565808] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4343.706052] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4343.708982] usblp0: removed
[ 4343.784759] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4343.918915] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4343.923942] usblp0: removed
[ 4343.997894] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4344.129846] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4344.134892] usblp0: removed
[ 4344.205660] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4344.337817] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4344.343851] usblp0: removed
[ 4344.417839] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4344.552753] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4344.557800] usblp0: removed
[ 4344.629565] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4344.762715] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4344.768740] usblp0: removed
[ 4344.841524] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4344.974669] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4344.980706] usblp0: removed
[ 4345.053496] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4345.185636] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4345.191649] usblp0: removed
[ 4345.265435] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4345.402593] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4345.408600] usblp0: removed
[ 4345.481386] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4345.614520] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4345.620581] usblp0: removed
[ 4345.693374] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4345.825547] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4345.831520] usblp0: removed
[ 4345.909425] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4346.045457] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4346.050480] usblp0: removed
[ 4346.121257] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4346.255377] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4346.261428] usblp0: removed
[ 4346.333217] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4346.467439] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4346.473446] usblp0: removed
[ 4346.549163] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4346.683312] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4346.688334] usblp0: removed
[ 4346.761123] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4346.894291] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4346.900457] usblp0: removed
[ 4346.978060] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4347.109245] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4347.115225] usblp0: removed
[ 4347.190014] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4347.323211] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4347.329212] usblp0: removed
[ 4347.407300] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4347.541381] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4347.544186] usblp0: removed
[ 4347.617921] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4347.759103] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4347.764130] usblp0: removed
[ 4347.837874] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4347.973064] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4347.979039] usblp0: removed
[ 4348.053823] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4348.190969] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4348.197005] usblp0: removed
[ 4348.269766] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4348.402912] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4348.407949] usblp0: removed
[ 4348.481725] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4348.614898] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4348.620888] usblp0: removed
[ 4348.697679] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4348.830834] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4348.836928] usblp0: removed
[ 4348.909624] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4349.046803] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4349.053877] usblp0: removed
[ 4349.125593] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4349.258729] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4349.264750] usblp0: removed
[ 4349.337518] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4349.471680] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4349.474827] usblp0: removed
[ 4349.545484] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4349.678645] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4349.685666] usblp0: removed
[ 4349.757436] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4349.890676] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4349.896629] usblp0: removed
[ 4349.969392] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4350.102547] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4350.108573] usblp0: removed
[ 4350.181344] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4350.313494] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4350.322554] usblp0: removed
[ 4350.393312] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4350.526555] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4350.532490] usblp0: removed
[ 4350.609249] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4350.746465] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4350.755498] usblp0: removed
[ 4350.833217] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4350.966416] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4350.972408] usblp0: removed
[ 4351.049167] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4351.183299] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4351.190349] usblp0: removed
[ 4351.262131] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4351.394269] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4351.399283] usblp0: removed
[ 4351.474059] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4351.606201] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4351.612283] usblp0: removed
[ 4351.686011] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4351.819157] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4351.824268] usblp0: removed
[ 4351.897955] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4352.029111] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4352.035154] usblp0: removed
[ 4352.105913] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4352.238072] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4352.243108] usblp0: removed
[ 4352.313867] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4352.446014] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4352.451065] usblp0: removed
[ 4352.525819] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4352.658974] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4352.664058] usblp0: removed
[ 4352.737775] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4352.873180] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4352.878971] usblp0: removed
[ 4352.953739] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4353.084870] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4353.089950] usblp0: removed
[ 4353.161679] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4353.293824] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4353.295923] usblp0: removed
[ 4353.373632] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4353.505768] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4353.508953] usblp0: removed
[ 4353.581673] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4353.715035] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4353.718895] usblp0: removed
[ 4353.789545] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4353.925755] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4353.932816] usblp0: removed
[ 4354.005486] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4354.138650] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4354.143718] usblp0: removed
[ 4354.219502] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4354.356589] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4354.361632] usblp0: removed
[ 4354.433405] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4354.567541] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4354.573561] usblp0: removed
[ 4354.645359] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4354.777572] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4354.783597] usblp0: removed
[ 4354.861305] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4354.994505] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4354.999467] usblp0: removed
[ 4355.073274] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4355.205409] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4355.214523] usblp0: removed
[ 4355.289212] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4355.422393] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4355.427390] usblp0: removed
[ 4355.501158] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4355.634327] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4355.639332] usblp0: removed
[ 4355.713149] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4355.846277] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4355.854332] usblp0: removed
[ 4355.926066] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4356.061218] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4356.066258] usblp0: removed
[ 4356.138022] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4356.269176] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4356.274215] usblp0: removed
[ 4356.346008] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4356.483139] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4356.488199] usblp0: removed
[ 4356.561923] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4356.699125] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4356.705110] usblp0: removed
[ 4356.780881] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4356.915045] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4356.924092] usblp0: removed
[ 4356.997857] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4357.132104] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4357.137362] usblp0: removed
[ 4357.209788] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4357.340501] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4357.344962] usblp0: removed
[ 4357.417775] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4357.549101] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4357.550960] usblp0: removed
[ 4357.621711] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4357.755878] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4357.762877] usblp0: removed
[ 4357.833647] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4357.966794] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4357.971850] usblp0: removed
[ 4358.045615] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4358.180758] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4358.185769] usblp0: removed
[ 4358.257606] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4358.388695] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4358.393740] usblp0: removed
[ 4358.465517] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4358.596661] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4358.601702] usblp0: removed
[ 4358.673485] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4358.802638] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4358.807679] usblp0: removed
[ 4358.881418] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4359.012590] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4359.017593] usblp0: removed
[ 4359.089363] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4359.220526] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4359.225564] usblp0: removed
[ 4359.297326] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4359.428524] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4359.433487] usblp0: removed
[ 4359.505278] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4359.645426] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4359.651461] usblp0: removed
[ 4359.726227] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4359.858421] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4359.863421] usblp0: removed
[ 4359.937180] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4360.070350] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4360.076368] usblp0: removed
[ 4360.149127] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4360.284299] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4360.289329] usblp0: removed
[ 4360.366123] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4360.499233] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4360.504322] usblp0: removed
[ 4360.578044] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4360.710196] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4360.712172] usblp0: removed
[ 4360.784982] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4360.918129] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4360.924261] usblp0: removed
[ 4360.997942] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4361.131124] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4361.137143] usblp0: removed
[ 4361.209931] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4361.345034] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4361.350244] usblp0: removed
[ 4361.425851] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4361.563006] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4361.568081] usblp0: removed
[ 4361.645804] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4361.778938] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4361.784990] usblp0: removed
[ 4361.857759] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4361.989908] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4361.995936] usblp0: removed
[ 4362.073711] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4362.205848] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4362.211893] usblp0: removed
[ 4362.285661] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4362.418802] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4362.423845] usblp0: removed
[ 4362.497612] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4362.629750] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4362.634795] usblp0: removed
[ 4362.709570] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4362.845755] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4362.851766] usblp0: removed
[ 4362.925544] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4363.056694] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4363.061695] usblp0: removed
[ 4363.133492] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4363.266671] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4363.272661] usblp0: removed
[ 4363.345413] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4363.477626] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4363.483623] usblp0: removed
[ 4363.557404] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4363.690524] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4363.696563] usblp0: removed
[ 4363.769331] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4363.901514] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4363.906536] usblp0: removed
[ 4363.977283] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4364.109444] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4364.114447] usblp0: removed
[ 4364.185246] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4364.317373] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4364.319453] usblp0: removed
[ 4364.393189] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4364.525342] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4364.527294] usblp0: removed
[ 4364.611584] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4364.746278] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4364.752485] usblp0: removed
[ 4364.825084] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4364.962304] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4364.966293] usblp0: removed
[ 4365.037046] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4365.171197] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4365.176274] usblp0: removed
[ 4365.250022] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4365.384189] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4365.389168] usblp0: removed
[ 4365.461963] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4365.595109] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4365.600190] usblp0: removed
[ 4365.673907] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4365.807067] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4365.813091] usblp0: removed
[ 4365.885866] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4366.019014] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4366.025063] usblp0: removed
[ 4366.097805] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4366.230083] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4366.236118] usblp0: removed
[ 4366.309821] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4366.446027] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4366.452085] usblp0: removed
[ 4366.525716] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4366.660952] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4366.663907] usblp0: removed
[ 4366.737665] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4366.874281] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4366.876968] usblp0: removed
[ 4366.949624] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4367.083778] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4367.089818] usblp0: removed
[ 4367.161583] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4367.296983] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4367.300764] usblp0: removed
[ 4367.373532] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4367.506680] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4367.511726] usblp0: removed
[ 4367.585494] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4367.720832] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4367.723664] usblp0: removed
[ 4367.797435] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4367.930585] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4367.935636] usblp0: removed
[ 4368.009393] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4368.145543] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4368.151567] usblp0: removed
[ 4368.225341] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4368.366493] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4368.372540] usblp0: removed
[ 4368.445460] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4368.578447] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4368.584457] usblp0: removed
[ 4368.657251] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4368.787392] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4368.789435] usblp0: removed
[ 4368.861217] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4368.995732] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4368.997517] usblp0: removed
[ 4369.069156] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4369.202643] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4369.204456] usblp0: removed
[ 4369.277110] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4369.410670] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4369.412459] usblp0: removed
[ 4369.486064] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4369.619212] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4369.628398] usblp0: removed
[ 4369.705028] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4369.839200] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4369.846198] usblp0: removed
[ 4369.917988] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4370.052241] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4370.055128] usblp0: removed
[ 4370.125935] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4370.258091] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4370.264158] usblp0: removed
[ 4370.337873] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4370.474028] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4370.479068] usblp0: removed
[ 4370.553830] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4370.689583] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4370.693021] usblp0: removed
[ 4370.765777] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4370.899978] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4370.902969] usblp0: removed
[ 4370.973749] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4371.105923] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4371.111919] usblp0: removed
[ 4371.185700] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4371.318870] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4371.323859] usblp0: removed
[ 4371.397664] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4371.530819] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4371.536832] usblp0: removed
[ 4371.613618] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4371.746747] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4371.751780] usblp0: removed
[ 4371.825558] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4371.958793] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4371.964718] usblp0: removed
[ 4372.041501] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4372.174825] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4372.180673] usblp0: removed
[ 4372.253449] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4372.385613] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4372.390640] usblp0: removed
[ 4372.461411] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4372.595560] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4372.601682] usblp0: removed
[ 4372.673357] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4372.806544] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4372.811547] usblp0: removed
[ 4372.885305] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4373.018527] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4373.021647] usblp0: removed
[ 4373.097268] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5
[ 4373.230411] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0166
[ 4373.236449] usblp0: removed
[ 4373.309217] usb 4-2.3: reset full speed USB device using uhci_hcd and address 5