[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-25-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #43-Ubuntu SMP Wed Sep 1 09:46:39 UTC 2010 (Ubuntu 2.6.32-25.43-generic 2.6.32.21+drm33.7) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) [ 0.000000] BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.3 present. [ 0.000000] last_pfn = 0x1fff0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CBFFF write-protect [ 0.000000] CC000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FE0000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 00000000000a0000 (usable) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000001fff0000 (usable) [ 0.000000] modified: 000000001fff0000 - 000000001fff3000 (ACPI NVS) [ 0.000000] modified: 000000001fff3000 - 0000000020000000 (ACPI data) [ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-000000001fff0000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 001fc00000 page 2M [ 0.000000] 001fc00000 - 001fff0000 page 4k [ 0.000000] kernel direct mapping tables up to 1fff0000 @ 7000-c000 [ 0.000000] RAMDISK: 17860000 - 18033c86 [ 0.000000] ACPI: RSDP 000f6a60 00014 (v00 GBT ) [ 0.000000] ACPI: RSDT 1fff3000 0002C (v01 GBT AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP 1fff3040 00074 (v01 GBT AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: DSDT 1fff30c0 03BB3 (v01 GBT AWRDACPI 00001000 MSFT 0100000C) [ 0.000000] ACPI: FACS 1fff0000 00040 [ 0.000000] ACPI: APIC 1fff6c80 0005A (v01 GBT AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 511MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 1fff0000 [ 0.000000] low ram: 0 - 1fff0000 [ 0.000000] node 0 low ram: 00000000 - 1fff0000 [ 0.000000] node 0 bootmap 00008000 - 0000c000 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 001fff0000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008dced8] TEXT DATA BSS ==> [0000100000 - 00008dced8] [ 0.000000] #4 [0017860000 - 0018033c86] RAMDISK ==> [0017860000 - 0018033c86] [ 0.000000] #5 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] [ 0.000000] #6 [00008dd000 - 00008e0092] BRK ==> [00008dd000 - 00008e0092] [ 0.000000] #7 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #8 [0000008000 - 000000c000] BOOTMAP ==> [0000008000 - 000000c000] [ 0.000000] found SMP MP-table at [c00f4ea0] f4ea0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x0001fff0 [ 0.000000] HighMem 0x0001fff0 -> 0x0001fff0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x000000a0 [ 0.000000] 0: 0x00000100 -> 0x0001fff0 [ 0.000000] On node 0 totalpages: 130956 [ 0.000000] free_area_init_node: node 0, pgdat c079a760, node_mem_map c1001000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3964 pages, LIFO batch:0 [ 0.000000] Normal zone: 992 pages used for memmap [ 0.000000] Normal zone: 125968 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 20000000 (gap: 20000000:dec00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c1800000 s36056 r0 d21288 u4194304 [ 0.000000] pcpu-alloc: s36056 r0 d21288 u4194304 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129932 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-25-generic root=UUID=56636786-23df-4d17-a1a4-eef377414907 ro quiet splash [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 2621120 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (00000000:00000000) [ 0.000000] Memory: 500296k/524224k available (4680k kernel code, 23244k reserved, 2122k data, 656k init, 0k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xe07f0000 - 0xff7fe000 ( 496 MB) [ 0.000000] lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB) [ 0.000000] .init : 0xc07a5000 - 0xc0849000 ( 656 kB) [ 0.000000] .data : 0xc05922c7 - 0xc07a4e68 (2122 kB) [ 0.000000] .text : 0xc0100000 - 0xc05922c7 (4680 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:256 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1616.007 MHz processor. [ 0.008008] Calibrating delay loop (skipped), value calculated using timer frequency.. 3232.01 BogoMIPS (lpj=6464028) [ 0.008042] Security Framework initialized [ 0.008083] AppArmor: AppArmor initialized [ 0.008099] Mount-cache hash table entries: 512 [ 0.008348] Initializing cgroup subsys ns [ 0.008357] Initializing cgroup subsys cpuacct [ 0.008367] Initializing cgroup subsys memory [ 0.008385] Initializing cgroup subsys devices [ 0.008391] Initializing cgroup subsys freezer [ 0.008397] Initializing cgroup subsys net_cls [ 0.008441] CPU: Trace cache: 12K uops, L1 D cache: 8K [ 0.008449] CPU: L2 cache: 512K [ 0.008454] CPU: Hyper-Threading is disabled [ 0.008461] mce: CPU supports 4 MCE banks [ 0.008481] CPU0: Thermal monitoring enabled (TM1) [ 0.008498] Performance Events: no PMU driver, software events only. [ 0.008512] Checking 'hlt' instruction... OK. [ 0.025587] SMP alternatives: switching to UP code [ 0.044922] Freeing SMP alternatives: 19k freed [ 0.044959] ACPI: Core revision 20090903 [ 0.056016] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.056029] ftrace: allocating 21789 entries in 43 pages [ 0.060141] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.060472] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.102979] CPU0: Intel(R) Pentium(R) 4 CPU 1.60GHz stepping 04 [ 0.104001] Brought up 1 CPUs [ 0.104001] Total of 1 processors activated (3232.01 BogoMIPS). [ 0.104001] CPU0 attaching NULL sched-domain. [ 0.104001] devtmpfs: initialized [ 0.104001] regulator: core version 0.5 [ 0.104001] Time: 12:18:51 Date: 09/05/10 [ 0.104001] NET: Registered protocol family 16 [ 0.104001] EISA bus registered [ 0.104001] ACPI: bus type pci registered [ 0.129858] PCI: PCI BIOS revision 2.10 entry at 0xfb110, last bus=2 [ 0.129863] PCI: Using configuration type 1 for base access [ 0.131844] bio: create slab at 0 [ 0.132786] ACPI: EC: Look up EC in DSDT [ 0.142136] ACPI: Interpreter enabled [ 0.142147] ACPI: (supports S0 S1 S4 S5) [ 0.142193] ACPI: Using IOAPIC for interrupt routing [ 0.150361] ACPI: No dock devices found. [ 0.150541] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.150627] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xe8000000-0xebffffff] [ 0.150878] pci 0000:00:1f.0: quirk: region 4000-407f claimed by ICH4 ACPI/GPIO/TCO [ 0.150886] pci 0000:00:1f.0: quirk: region 4080-40bf claimed by ICH4 GPIO [ 0.150946] pci 0000:00:1f.1: reg 20 io port: [0xf000-0xf00f] [ 0.151025] pci 0000:00:1f.2: reg 20 io port: [0xd000-0xd01f] [ 0.151104] pci 0000:00:1f.3: reg 20 io port: [0x5000-0x500f] [ 0.151180] pci 0000:00:1f.4: reg 20 io port: [0xd800-0xd81f] [ 0.151261] pci 0000:01:00.0: reg 10 32bit mmio pref: [0xe0000000-0xe7ffffff] [ 0.151271] pci 0000:01:00.0: reg 14 io port: [0xc000-0xc0ff] [ 0.151283] pci 0000:01:00.0: reg 18 32bit mmio: [0xed000000-0xed00ffff] [ 0.151309] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] [ 0.151340] pci 0000:01:00.0: supports D1 D2 [ 0.151396] pci 0000:00:01.0: bridge io port: [0xc000-0xcfff] [ 0.151403] pci 0000:00:01.0: bridge 32bit mmio: [0xec000000-0xedffffff] [ 0.151410] pci 0000:00:01.0: bridge 32bit mmio pref: [0xe0000000-0xe7ffffff] [ 0.151472] pci 0000:02:07.0: reg 10 32bit mmio: [0xee007000-0xee007fff] [ 0.151532] pci 0000:02:07.0: supports D1 D2 [ 0.151537] pci 0000:02:07.0: PME# supported from D0 D1 D2 D3hot [ 0.151544] pci 0000:02:07.0: PME# disabled [ 0.151590] pci 0000:02:07.1: reg 10 32bit mmio: [0xee004000-0xee004fff] [ 0.151650] pci 0000:02:07.1: supports D1 D2 [ 0.151654] pci 0000:02:07.1: PME# supported from D0 D1 D2 D3hot [ 0.151661] pci 0000:02:07.1: PME# disabled [ 0.151707] pci 0000:02:07.2: reg 10 32bit mmio: [0xee005000-0xee0050ff] [ 0.151767] pci 0000:02:07.2: supports D1 D2 [ 0.151771] pci 0000:02:07.2: PME# supported from D0 D1 D2 D3hot [ 0.151778] pci 0000:02:07.2: PME# disabled [ 0.151833] pci 0000:02:08.0: reg 10 32bit mmio: [0xee006000-0xee006fff] [ 0.151845] pci 0000:02:08.0: reg 14 io port: [0xa000-0xa03f] [ 0.151899] pci 0000:02:08.0: supports D1 D2 [ 0.151903] pci 0000:02:08.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.151910] pci 0000:02:08.0: PME# disabled [ 0.151960] pci 0000:02:0a.0: reg 10 io port: [0xa400-0xa43f] [ 0.152038] pci 0000:02:0a.0: supports D1 D2 [ 0.152092] pci 0000:02:0c.0: reg 10 io port: [0xa800-0xa807] [ 0.152103] pci 0000:02:0c.0: reg 14 io port: [0xac00-0xac03] [ 0.152114] pci 0000:02:0c.0: reg 18 io port: [0xb000-0xb007] [ 0.152125] pci 0000:02:0c.0: reg 1c io port: [0xb400-0xb403] [ 0.152136] pci 0000:02:0c.0: reg 20 io port: [0xb800-0xb80f] [ 0.152147] pci 0000:02:0c.0: reg 24 32bit mmio: [0xee000000-0xee003fff] [ 0.152180] pci 0000:02:0c.0: supports D1 [ 0.152223] pci 0000:00:1e.0: transparent bridge [ 0.152230] pci 0000:00:1e.0: bridge io port: [0xa000-0xbfff] [ 0.152239] pci 0000:00:1e.0: bridge 32bit mmio: [0xee000000-0xee0fffff] [ 0.152262] pci_bus 0000:00: on NUMA node 0 [ 0.152272] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.152454] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.173407] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.173600] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 *12 14 15) [ 0.173791] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.173977] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.174163] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 *12 14 15) [ 0.174349] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.174540] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.174727] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 11 *12 14 15) [ 0.174963] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.174974] vgaarb: loaded [ 0.175228] SCSI subsystem initialized [ 0.175365] libata version 3.00 loaded. [ 0.175519] usbcore: registered new interface driver usbfs [ 0.175548] usbcore: registered new interface driver hub [ 0.175600] usbcore: registered new device driver usb [ 0.175884] ACPI: WMI: Mapper loaded [ 0.175889] PCI: Using ACPI for IRQ routing [ 0.176163] NetLabel: Initializing [ 0.176169] NetLabel: domain hash size = 128 [ 0.176173] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.176205] NetLabel: unlabeled traffic allowed by default [ 0.176293] Switching to clocksource tsc [ 0.179998] AppArmor: AppArmor Filesystem Enabled [ 0.179998] pnp: PnP ACPI init [ 0.179998] ACPI: bus type pnp registered [ 0.186905] pnp: PnP ACPI: found 15 devices [ 0.186910] ACPI: ACPI bus type pnp unregistered [ 0.186920] PnPBIOS: Disabled by ACPI PNP [ 0.186943] system 00:00: iomem range 0xf0000-0xf3fff could not be reserved [ 0.186950] system 00:00: iomem range 0xf4000-0xf7fff could not be reserved [ 0.186957] system 00:00: iomem range 0xf8000-0xfbfff could not be reserved [ 0.186964] system 00:00: iomem range 0xfc000-0xfffff could not be reserved [ 0.186970] system 00:00: iomem range 0x1fff0000-0x1fffffff could not be reserved [ 0.186977] system 00:00: iomem range 0x0-0x9ffff could not be reserved [ 0.186984] system 00:00: iomem range 0x100000-0x1ffeffff could not be reserved [ 0.186991] system 00:00: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.186997] system 00:00: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.187004] system 00:00: iomem range 0xffb00000-0xffb7ffff has been reserved [ 0.187011] system 00:00: iomem range 0xfff00000-0xffffffff has been reserved [ 0.187017] system 00:00: iomem range 0xe0000-0xeffff has been reserved [ 0.187034] system 00:05: ioport range 0x4d0-0x4d1 has been reserved [ 0.187041] system 00:05: ioport range 0x290-0x29f has been reserved [ 0.187047] system 00:05: ioport range 0x800-0x805 has been reserved [ 0.221979] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.221987] pci 0000:00:01.0: IO window: 0xc000-0xcfff [ 0.221996] pci 0000:00:01.0: MEM window: 0xec000000-0xedffffff [ 0.222003] pci 0000:00:01.0: PREFETCH window: 0xe0000000-0xe7ffffff [ 0.222014] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02 [ 0.222021] pci 0000:00:1e.0: IO window: 0xa000-0xbfff [ 0.222030] pci 0000:00:1e.0: MEM window: 0xee000000-0xee0fffff [ 0.222037] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.222064] pci 0000:00:1e.0: setting latency timer to 64 [ 0.222073] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.222079] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.222085] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff] [ 0.222091] pci_bus 0000:01: resource 1 mem: [0xec000000-0xedffffff] [ 0.222097] pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xe7ffffff] [ 0.222103] pci_bus 0000:02: resource 0 io: [0xa000-0xbfff] [ 0.222108] pci_bus 0000:02: resource 1 mem: [0xee000000-0xee0fffff] [ 0.222114] pci_bus 0000:02: resource 3 io: [0x00-0xffff] [ 0.222120] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff] [ 0.222192] NET: Registered protocol family 2 [ 0.222391] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.222999] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.223123] TCP bind hash table entries: 16384 (order: 5, 131072 bytes) [ 0.223240] TCP: Hash tables configured (established 16384 bind 16384) [ 0.223244] TCP reno registered [ 0.223395] NET: Registered protocol family 1 [ 0.223478] pci 0000:01:00.0: Boot video device [ 0.223549] pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling [ 0.223925] cpufreq-nforce2: No nForce2 chipset. [ 0.223986] Scanning for low memory corruption every 60 seconds [ 0.224215] audit: initializing netlink socket (disabled) [ 0.224236] type=2000 audit(1283689131.223:1): initialized [ 0.237758] Trying to unpack rootfs image as initramfs... [ 0.251953] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.259334] VFS: Disk quotas dquot_6.5.2 [ 0.259467] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.260823] fuse init (API version 7.13) [ 0.261021] msgmni has been set to 977 [ 0.263958] alg: No test for stdrng (krng) [ 0.264130] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.264137] io scheduler noop registered [ 0.264141] io scheduler anticipatory registered [ 0.264145] io scheduler deadline registered [ 0.264242] io scheduler cfq registered (default) [ 0.264470] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.264526] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.264717] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.264726] ACPI: Power Button [PWRB] [ 0.264842] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.264848] ACPI: Power Button [PWRF] [ 0.265315] processor LNXCPU:00: registered as cooling_device0 [ 0.275697] isapnp: Scanning for PnP cards... [ 0.284929] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.285066] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.285206] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.285878] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.286082] 00:0c: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.293157] brd: module loaded [ 0.294159] loop: module loaded [ 0.294386] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.294604] ata_piix 0000:00:1f.1: version 2.13 [ 0.294722] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 0.338516] scsi0 : ata_piix [ 0.343687] scsi1 : ata_piix [ 0.345435] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 0.345443] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 0.346319] Fixed MDIO Bus: probed [ 0.346399] PPP generic driver version 2.4.2 [ 0.346531] tun: Universal TUN/TAP device driver, 1.6 [ 0.346536] tun: (C) 1999-2004 Max Krasnyansky [ 0.346737] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.346783] alloc irq_desc for 21 on node -1 [ 0.346788] alloc kstat_irqs on node -1 [ 0.346802] ehci_hcd 0000:02:07.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21 [ 0.346831] ehci_hcd 0000:02:07.2: EHCI Host Controller [ 0.346900] ehci_hcd 0000:02:07.2: new USB bus registered, assigned bus number 1 [ 0.368044] ehci_hcd 0000:02:07.2: irq 21, io mem 0xee005000 [ 0.380032] ehci_hcd 0000:02:07.2: USB 2.0 started, EHCI 0.95 [ 0.380288] usb usb1: configuration #1 chosen from 1 choice [ 0.380356] hub 1-0:1.0: USB hub found [ 0.380383] hub 1-0:1.0: 5 ports detected [ 0.380508] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.380560] alloc irq_desc for 16 on node -1 [ 0.380565] alloc kstat_irqs on node -1 [ 0.380581] ohci_hcd 0000:02:07.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.380612] ohci_hcd 0000:02:07.0: OHCI Host Controller [ 0.380705] ohci_hcd 0000:02:07.0: new USB bus registered, assigned bus number 2 [ 0.380758] ohci_hcd 0000:02:07.0: irq 16, io mem 0xee007000 [ 0.956644] ata2.00: ATAPI: TOSHIBA DVD-ROM SD-M1612, 1004, max UDMA/33 [ 0.956757] ata2.01: ATAPI: PLEXTOR CD-R PX-W4824A, 1.03, max UDMA/33 [ 0.956933] ata1.00: ATA-6: WDC WD3200JB-22KFA0, 08.05J08, max UDMA/100 [ 0.956940] ata1.00: 625142448 sectors, multi 16: LBA48 [ 0.957012] ata1.01: ATA-5: MAXTOR 6L080L4, A93.0500, max UDMA/133 [ 0.957019] ata1.01: 156355584 sectors, multi 16: LBA [ 0.972406] ata2.00: configured for UDMA/33 [ 0.972769] ata1.00: configured for UDMA/100 [ 0.980116] ata2.01: configured for UDMA/33 [ 1.027679] ata1.01: configured for UDMA/100 [ 1.464136] isapnp: No Plug & Play device found [ 1.464405] scsi 0:0:0:0: Direct-Access ATA WDC WD3200JB-22K 08.0 PQ: 0 ANSI: 5 [ 1.464755] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.464985] scsi 0:0:1:0: Direct-Access ATA MAXTOR 6L080L4 A93. PQ: 0 ANSI: 5 [ 1.465213] sd 0:0:1:0: Attached scsi generic sg1 type 0 [ 1.465467] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 1.465559] sd 0:0:0:0: [sda] Write Protect is off [ 1.465567] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.465614] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.465886] sda: [ 1.471532] scsi 1:0:0:0: CD-ROM TOSHIBA DVD-ROM SD-M1612 1004 PQ: 0 ANSI: 5 [ 1.480794] sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray [ 1.480804] Uniform CD-ROM driver Revision: 3.20 [ 1.481044] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.481194] sr 1:0:0:0: Attached scsi generic sg2 type 5 [ 1.482350] sda1 sda2 < [ 1.483118] scsi 1:0:1:0: CD-ROM PLEXTOR CD-R PX-W4824A 1.03 PQ: 0 ANSI: 5 [ 1.489506] sr1: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray [ 1.489763] sr 1:0:1:0: Attached scsi CD-ROM sr1 [ 1.489900] sr 1:0:1:0: Attached scsi generic sg3 type 5 [ 1.507480] sda5 > [ 1.508057] sd 0:0:1:0: [sdb] 156355584 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 1.508161] sd 0:0:1:0: [sdb] Write Protect is off [ 1.508169] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.508222] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.508502] sdb: sdb1 sdb2 < sdb5 > [ 1.533265] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.533444] sd 0:0:1:0: [sdb] Attached SCSI disk [ 1.565176] Freeing initrd memory: 8015k freed [ 1.580153] usb usb2: configuration #1 chosen from 1 choice [ 1.580223] hub 2-0:1.0: USB hub found [ 1.580252] hub 2-0:1.0: 3 ports detected [ 1.580382] alloc irq_desc for 18 on node -1 [ 1.580387] alloc kstat_irqs on node -1 [ 1.580402] ohci_hcd 0000:02:07.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 1.580435] ohci_hcd 0000:02:07.1: OHCI Host Controller [ 1.580534] ohci_hcd 0000:02:07.1: new USB bus registered, assigned bus number 3 [ 1.580582] ohci_hcd 0000:02:07.1: irq 18, io mem 0xee004000 [ 2.142237] usb usb3: configuration #1 chosen from 1 choice [ 2.142298] hub 3-0:1.0: USB hub found [ 2.142316] hub 3-0:1.0: 2 ports detected [ 2.142410] uhci_hcd: USB Universal Host Controller Interface driver [ 2.142506] alloc irq_desc for 19 on node -1 [ 2.142511] alloc kstat_irqs on node -1 [ 2.142522] uhci_hcd 0000:00:1f.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 2.142537] uhci_hcd 0000:00:1f.2: setting latency timer to 64 [ 2.142543] uhci_hcd 0000:00:1f.2: UHCI Host Controller [ 2.142642] uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 4 [ 2.142688] uhci_hcd 0000:00:1f.2: irq 19, io base 0x0000d000 [ 2.142873] usb usb4: configuration #1 chosen from 1 choice [ 2.142930] hub 4-0:1.0: USB hub found [ 2.142947] hub 4-0:1.0: 2 ports detected [ 2.143030] alloc irq_desc for 23 on node -1 [ 2.143035] alloc kstat_irqs on node -1 [ 2.143043] uhci_hcd 0000:00:1f.4: PCI INT C -> GSI 23 (level, low) -> IRQ 23 [ 2.143054] uhci_hcd 0000:00:1f.4: setting latency timer to 64 [ 2.143060] uhci_hcd 0000:00:1f.4: UHCI Host Controller [ 2.143145] uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 5 [ 2.143186] uhci_hcd 0000:00:1f.4: irq 23, io base 0x0000d800 [ 2.143356] usb usb5: configuration #1 chosen from 1 choice [ 2.143413] hub 5-0:1.0: USB hub found [ 2.143429] hub 5-0:1.0: 2 ports detected [ 2.143616] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 2.143621] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 2.144639] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.144875] mice: PS/2 mouse device common for all mice [ 2.145110] rtc_cmos 00:07: RTC can wake from S4 [ 2.145195] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 2.145226] rtc0: alarms up to one month, 242 bytes nvram [ 2.145476] device-mapper: uevent: version 1.0.3 [ 2.145711] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 2.145822] device-mapper: multipath: version 1.1.0 loaded [ 2.145828] device-mapper: multipath round-robin: version 1.0.0 loaded [ 2.146070] EISA: Probing bus 0 at eisa.0 [ 2.146094] Cannot allocate resource for EISA slot 4 [ 2.146099] Cannot allocate resource for EISA slot 5 [ 2.146116] EISA: Detected 0 cards. [ 2.146212] cpuidle: using governor ladder [ 2.146217] cpuidle: using governor menu [ 2.147122] TCP cubic registered [ 2.147391] NET: Registered protocol family 10 [ 2.148366] lo: Disabled Privacy Extensions [ 2.149007] NET: Registered protocol family 17 [ 2.149106] Using IPI No-Shortcut mode [ 2.149324] PM: Resume from disk failed. [ 2.149347] registered taskstats version 1 [ 2.149728] Magic number: 10:934:328 [ 2.149864] rtc_cmos 00:07: setting system clock to 2010-09-05 12:18:53 UTC (1283689133) [ 2.149871] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.149874] EDD information not available. [ 2.149958] Freeing unused kernel memory: 656k freed [ 2.151200] Write protecting the kernel text: 4684k [ 2.151264] Write protecting the kernel read-only data: 1840k [ 2.166600] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 2.195163] udev: starting version 151 [ 2.366019] xor: automatically using best checksumming function: pIII_sse [ 2.384042] pIII_sse : 2067.000 MB/sec [ 2.384047] xor: using function: pIII_sse (2067.000 MB/sec) [ 2.452087] usb 4-2: new low speed USB device using uhci_hcd and address 2 [ 2.630257] Floppy drive(s): fd0 is 1.44M [ 2.634042] usb 4-2: configuration #1 chosen from 1 choice [ 2.643978] pata_pdc2027x 0000:02:0c.0: version 1.0 [ 2.644107] pata_pdc2027x 0000:02:0c.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 2.743378] pata_pdc2027x 0000:02:0c.0: PLL input clock 33638 kHz [ 2.777532] FDC 0 is a post-1991 82077 [ 2.820580] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 2.820588] e100: Copyright(c) 1999-2006 Intel Corporation [ 2.861937] device-mapper: dm-raid45: initialized v0.2594b [ 2.867930] usbcore: registered new interface driver hiddev [ 2.881151] scsi2 : pata_pdc2027x [ 2.881523] scsi3 : pata_pdc2027x [ 2.881619] ata3: PATA max UDMA/133 mmio m16384@0xee000000 cmd 0xee0017c0 irq 18 [ 2.881626] ata4: PATA max UDMA/133 mmio m16384@0xee000000 cmd 0xee0015c0 irq 18 [ 2.881906] alloc irq_desc for 20 on node -1 [ 2.881912] alloc kstat_irqs on node -1 [ 2.881926] e100 0000:02:08.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 2.905822] e100 0000:02:08.0: PME# disabled [ 2.906602] input: Microsoft Microsoft Trackball Optical® as /devices/pci0000:00/0000:00:1f.2/usb4/4-2/4-2:1.0/input/input4 [ 2.906824] generic-usb 0003:045E:0023.0001: input,hidraw0: USB HID v1.00 Mouse [Microsoft Microsoft Trackball Optical®] on usb-0000:00:1f.2-2/input0 [ 2.906877] usbcore: registered new interface driver usbhid [ 2.906885] usbhid: v2.6:USB HID core driver [ 2.910724] e100: eth0: e100_probe: addr 0xee006000, irq 20, MAC addr 00:20:ed:27:95:db [ 3.411227] EXT4-fs (sda1): mounted filesystem with ordered data mode [ 5.487354] Adding 1490936k swap on /dev/sda5. Priority:-1 extents:1 across:1490936k [ 5.956863] udev: starting version 151 [ 7.088278] Linux agpgart interface v0.103 [ 7.133266] agpgart-intel 0000:00:00.0: Intel 845G Chipset [ 7.138651] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xe8000000 [ 7.143124] Intel 82802 RNG detected [ 7.212913] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 7.367037] parport_pc 00:0d: reported by Plug and Play ACPI [ 7.367091] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 7.427400] lp: driver loaded but no devices found [ 7.468397] lp0: using parport0 (interrupt-driven). [ 7.533769] type=1505 audit(1283689138.882:2): operation="profile_load" pid=439 name="/sbin/dhclient3" [ 7.534723] type=1505 audit(1283689138.882:3): operation="profile_load" pid=439 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 7.535235] type=1505 audit(1283689138.882:4): operation="profile_load" pid=439 name="/usr/lib/connman/scripts/dhclient-script" [ 7.558822] ppdev: user-space parallel port driver [ 7.895262] [drm] Initialized drm 1.1.0 20060810 [ 8.337956] type=1505 audit(1283689139.686:5): operation="profile_load" pid=537 name="/usr/sbin/ntpd" [ 9.073740] [drm] radeon defaulting to kernel modesetting. [ 9.073749] [drm] radeon kernel modesetting enabled. [ 9.073840] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 9.078746] [drm] radeon: Initializing kernel modesetting. [ 9.078890] [drm] register mmio base: 0xED000000 [ 9.078895] [drm] register mmio size: 65536 [ 9.079222] [drm] GPU reset succeed (RBBM_STATUS=0x00000140) [ 9.079254] agpgart-intel 0000:00:00.0: AGP 2.0 bridge [ 9.079281] agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode [ 9.079309] radeon 0000:01:00.0: putting AGP V2 device into 4x mode [ 9.079358] [drm] radeon: VRAM 64M [ 9.079363] [drm] radeon: VRAM from 0x00000000 to 0x03FFFFFF [ 9.079367] [drm] radeon: GTT 64M [ 9.079371] [drm] radeon: GTT from 0xE8000000 to 0xEBFFFFFF [ 9.079403] [drm] radeon: irq initialized. [ 9.079593] [drm] Detected VRAM RAM=64M, BAR=128M [ 9.079601] [drm] RAM width 128bits DDR [ 9.079740] [TTM] Zone kernel: Available graphics memory: 254634 kiB. [ 9.079773] [drm] radeon: 64M of VRAM memory ready [ 9.079778] [drm] radeon: 64M of GTT memory ready. [ 9.080075] [drm] radeon: cp idle (0x02000603) [ 9.080158] [drm] Loading R200 Microcode [ 9.080168] platform radeon_cp.0: firmware: requesting radeon/R200_cp.bin [ 9.289847] [drm] radeon: ring at 0x00000000E8000000 [ 9.289874] [drm] ring test succeeded in 1 usecs [ 9.303116] [drm] radeon: ib pool ready. [ 9.303269] [drm] ib test succeeded in 0 usecs [ 9.309292] [drm] Default TV standard: NTSC [ 9.309300] [drm] 27.000000000 MHz TV ref clk [ 9.309308] [drm] DFP table revision: 2 [ 9.314392] [drm] Radeon Display Connectors [ 9.314400] [drm] Connector 0: [ 9.314404] [drm] VGA [ 9.314410] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60 [ 9.314414] [drm] Encoders: [ 9.314418] [drm] CRT1: INTERNAL_DAC1 [ 9.314422] [drm] Connector 1: [ 9.314425] [drm] DVI-I [ 9.314428] [drm] HPD1 [ 9.314433] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64 [ 9.314437] [drm] Encoders: [ 9.314441] [drm] CRT2: INTERNAL_DAC2 [ 9.314445] [drm] DFP1: INTERNAL_TMDS1 [ 9.533866] [drm] fb mappable at 0xE0040000 [ 9.533873] [drm] vram apper at 0xE0000000 [ 9.533877] [drm] size 5242880 [ 9.533881] [drm] fb depth is 24 [ 9.533884] [drm] pitch is 5120 [ 9.535397] fb0: radeondrmfb frame buffer device [ 9.535404] registered panic notifier [ 9.535418] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0 [ 9.763413] vga16fb: initializing [ 9.763424] vga16fb: mapped to 0xc00a0000 [ 9.763433] vga16fb: not registering due to another framebuffer present [ 10.322732] Console: switching to colour frame buffer device 160x64 [ 11.582044] alloc irq_desc for 22 on node -1 [ 11.582051] alloc kstat_irqs on node -1 [ 11.582074] ENS1371 0000:02:0a.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 12.238159] type=1505 audit(1283689143.588:6): operation="profile_load" pid=695 name="/usr/share/gdm/guest-session/Xsession" [ 12.251641] type=1505 audit(1283689143.598:7): operation="profile_replace" pid=696 name="/sbin/dhclient3" [ 12.268158] type=1505 audit(1283689143.618:8): operation="profile_replace" pid=696 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 12.268700] type=1505 audit(1283689143.618:9): operation="profile_replace" pid=696 name="/usr/lib/connman/scripts/dhclient-script" [ 12.404159] type=1505 audit(1283689143.754:10): operation="profile_load" pid=697 name="/usr/bin/evince" [ 12.417445] type=1505 audit(1283689143.766:11): operation="profile_load" pid=697 name="/usr/bin/evince-previewer" [ 12.536098] __ratelimit: 3 callbacks suppressed [ 12.536105] type=1505 audit(1283689143.886:13): operation="profile_load" pid=699 name="/usr/lib/cups/backend/cups-pdf" [ 12.537261] type=1505 audit(1283689143.886:14): operation="profile_load" pid=699 name="/usr/sbin/cupsd" [ 12.581268] type=1505 audit(1283689143.930:15): operation="profile_replace" pid=700 name="/usr/sbin/ntpd" [ 12.667996] type=1505 audit(1283689144.014:16): operation="profile_load" pid=701 name="/usr/sbin/tcpdump" [ 13.161058] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 13.164172] e100: eth0 NIC Link is Up 100 Mbps Full Duplex [ 13.164425] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready