[ 0.000000] microcode: updated early: 0xe0 -> 0xf0, date = 2021-11-12 [ 0.000000] Linux version 6.4.3-060403-generic (kernel@kathleen) (x86_64-linux-gnu-gcc-12 (Ubuntu 12.3.0-1ubuntu1) 12.3.0, GNU ld (GNU Binutils for Ubuntu) 2.40) #202307110536 SMP PREEMPT_DYNAMIC Tue Jul 11 05:43:58 UTC 2023 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-6.4.3-060403-generic root=UUID=9d73ee34-4258-4eaa-9690-c36f0155d2a8 ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Hygon HygonGenuine [ 0.000000] Centaur CentaurHauls [ 0.000000] zhaoxin Shanghai [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64 [ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64 [ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format. [ 0.000000] signal: max sigframe size: 2032 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000016484fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000016485000-0x0000000016485fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000016486000-0x0000000016486fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000016487000-0x0000000017a57fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000017a58000-0x0000000018357fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000018358000-0x000000002e56dfff] usable [ 0.000000] BIOS-e820: [mem 0x000000002e56e000-0x000000002f88dfff] reserved [ 0.000000] BIOS-e820: [mem 0x000000002f88e000-0x000000002ff7dfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000002ff7e000-0x000000002fffdfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000002fffe000-0x000000002fffefff] usable [ 0.000000] BIOS-e820: [mem 0x000000002ffff000-0x000000003cffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fd000000-0x00000000fe7fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed84000-0x00000000fed84fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000004c1ffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] e820: update [mem 0x15d2e018-0x15d3e057] usable ==> usable [ 0.000000] e820: update [mem 0x15d2e018-0x15d3e057] usable ==> usable [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009dfff] usable [ 0.000000] reserve setup_data: [mem 0x000000000009e000-0x00000000000fffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000015d2e017] usable [ 0.000000] reserve setup_data: [mem 0x0000000015d2e018-0x0000000015d3e057] usable [ 0.000000] reserve setup_data: [mem 0x0000000015d3e058-0x0000000016484fff] usable [ 0.000000] reserve setup_data: [mem 0x0000000016485000-0x0000000016485fff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x0000000016486000-0x0000000016486fff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000016487000-0x0000000017a57fff] usable [ 0.000000] reserve setup_data: [mem 0x0000000017a58000-0x0000000018357fff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000018358000-0x000000002e56dfff] usable [ 0.000000] reserve setup_data: [mem 0x000000002e56e000-0x000000002f88dfff] reserved [ 0.000000] reserve setup_data: [mem 0x000000002f88e000-0x000000002ff7dfff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x000000002ff7e000-0x000000002fffdfff] ACPI data [ 0.000000] reserve setup_data: [mem 0x000000002fffe000-0x000000002fffefff] usable [ 0.000000] reserve setup_data: [mem 0x000000002ffff000-0x000000003cffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fd000000-0x00000000fe7fffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed84000-0x00000000fed84fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x00000004c1ffffff] usable [ 0.000000] efi: EFI v2.5 by INSYDE Corp. [ 0.000000] efi: TPMFinalLog=0x2f886000 ACPI 2.0=0x2fffd014 SMBIOS=0x2f0ac000 SMBIOS 3.0=0x2f0aa000 ESRT=0x2f0a8718 MOKvar=0x2eb88000 RNG=0x2ff94018 TPMEventLog=0x15d3f018 [ 0.000000] random: crng init done [ 0.000000] efi: Remove mem46: MMIO range=[0xe0000000-0xefffffff] (256MB) from e820 map [ 0.000000] e820: remove [mem 0xe0000000-0xefffffff] reserved [ 0.000000] efi: Remove mem47: MMIO range=[0xfd000000-0xfe7fffff] (24MB) from e820 map [ 0.000000] e820: remove [mem 0xfd000000-0xfe7fffff] reserved [ 0.000000] efi: Not removing mem48: MMIO range=[0xfec00000-0xfec00fff] (4KB) from e820 map [ 0.000000] efi: Not removing mem49: MMIO range=[0xfed00000-0xfed00fff] (4KB) from e820 map [ 0.000000] efi: Not removing mem50: MMIO range=[0xfed10000-0xfed19fff] (40KB) from e820 map [ 0.000000] efi: Not removing mem51: MMIO range=[0xfed84000-0xfed84fff] (4KB) from e820 map [ 0.000000] efi: Not removing mem52: MMIO range=[0xfee00000-0xfee00fff] (4KB) from e820 map [ 0.000000] efi: Remove mem53: MMIO range=[0xffa00000-0xffffffff] (6MB) from e820 map [ 0.000000] e820: remove [mem 0xffa00000-0xffffffff] reserved [ 0.000000] SMBIOS 3.0.0 present. [ 0.000000] DMI: LENOVO 81C4/LNVNB161216, BIOS 8GCN37WW 11/23/2020 [ 0.000000] tsc: Detected 2000.000 MHz processor [ 0.000000] tsc: Detected 1999.968 MHz TSC [ 0.000643] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000645] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000653] last_pfn = 0x4c2000 max_arch_pfn = 0x400000000 [ 0.000657] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001224] last_pfn = 0x2ffff max_arch_pfn = 0x400000000 [ 0.006890] esrt: Reserving ESRT space from 0x000000002f0a8718 to 0x000000002f0a87a0. [ 0.006897] Using GB pages for direct mapping [ 0.007386] Secure boot disabled [ 0.007387] RAMDISK: [mem 0x0973d000-0x0d94afff] [ 0.007391] ACPI: Early table checksum verification disabled [ 0.007394] ACPI: RSDP 0x000000002FFFD014 000024 (v02 LENOVO) [ 0.007397] ACPI: XSDT 0x000000002FFB3188 000134 (v01 LENOVO CB-01 00000001 01000013) [ 0.007402] ACPI: FACP 0x000000002FFEE000 00010C (v05 LENOVO CB-01 00000001 ACPI 00040000) [ 0.007406] ACPI: DSDT 0x000000002FFB9000 031133 (v02 LENOVO CB-01 00000001 ACPI 00040000) [ 0.007408] ACPI: FACS 0x000000002FF56000 000040 [ 0.007410] ACPI: UEFI 0x000000002FFFC000 000236 (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.007413] ACPI: UEFI 0x000000002FFFB000 000042 (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.007415] ACPI: MSDM 0x000000002FFFA000 000055 (v03 LENOVO CB-01 00000001 ACPI 00040000) [ 0.007417] ACPI: SSDT 0x000000002FFF9000 0004C3 (v02 LENOVO CB-01 00000001 ACPI 00040000) [ 0.007420] ACPI: SSDT 0x000000002FFF8000 000046 (v02 LENOVO CB-01 00000001 ACPI 00040000) [ 0.007422] ACPI: TPM2 0x000000002FFF7000 000034 (v03 LENOVO CB-01 00000001 ACPI 00040000) [ 0.007424] ACPI: SSDT 0x000000002FFF3000 0033A6 (v02 LENOVO CB-01 00000001 ACPI 00040000) [ 0.007426] ACPI: ASF! 0x000000002FFF2000 0000A5 (v32 LENOVO CB-01 00000001 ACPI 00040000) [ 0.007429] ACPI: ASPT 0x000000002FFF1000 000034 (v07 LENOVO CB-01 00000001 ACPI 00040000) [ 0.007431] ACPI: BOOT 0x000000002FFF0000 000028 (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.007433] ACPI: DBGP 0x000000002FFEF000 000034 (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.007436] ACPI: HPET 0x000000002FFED000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.007438] ACPI: APIC 0x000000002FFEC000 00012C (v03 LENOVO CB-01 00000001 ACPI 00040000) [ 0.007440] ACPI: MCFG 0x000000002FFEB000 00003C (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.007443] ACPI: SSDT 0x000000002FFB8000 000A72 (v02 LENOVO CB-01 00000001 ACPI 00040000) [ 0.007445] ACPI: LPIT 0x000000002FFB7000 000094 (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.007448] ACPI: WSMT 0x000000002FFB6000 000028 (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.007450] ACPI: SSDT 0x000000002FFB5000 00029F (v02 LENOVO CB-01 00000001 ACPI 00040000) [ 0.007452] ACPI: SSDT 0x000000002FFB4000 000346 (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.007454] ACPI: SSDT 0x000000002FFAF000 003002 (v02 LENOVO CB-01 00000001 ACPI 00040000) [ 0.007457] ACPI: SSDT 0x000000002FFAE000 000358 (v02 LENOVO CB-01 00000001 ACPI 00040000) [ 0.007459] ACPI: SSDT 0x000000002FFAD000 000306 (v02 LENOVO CB-01 00000001 ACPI 00040000) [ 0.007461] ACPI: SSDT 0x000000002FFAC000 00051E (v02 LENOVO CB-01 00000001 ACPI 00040000) [ 0.007464] ACPI: DBGP 0x000000002FFAB000 000034 (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.007466] ACPI: DBG2 0x000000002FFAA000 000054 (v00 LENOVO CB-01 00000001 ACPI 00040000) [ 0.007468] ACPI: SSDT 0x000000002FFA9000 000F94 (v02 LENOVO CB-01 00000001 ACPI 00040000) [ 0.007470] ACPI: SSDT 0x000000002FFA7000 0017AE (v02 LENOVO CB-01 00000001 ACPI 00040000) [ 0.007473] ACPI: SSDT 0x000000002FFA1000 00592D (v02 LENOVO CB-01 00000001 ACPI 00040000) [ 0.007475] ACPI: SSDT 0x000000002FF99000 007830 (v02 LENOVO CB-01 00000001 ACPI 00040000) [ 0.007477] ACPI: DMAR 0x000000002FF98000 0000A8 (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.007480] ACPI: NHLT 0x000000002FF97000 000C1C (v00 LENOVO CB-01 00000001 ACPI 00040000) [ 0.007482] ACPI: FPDT 0x000000002FF96000 000044 (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.007484] ACPI: BGRT 0x000000002FF95000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.007486] ACPI: Reserving FACP table memory at [mem 0x2ffee000-0x2ffee10b] [ 0.007487] ACPI: Reserving DSDT table memory at [mem 0x2ffb9000-0x2ffea132] [ 0.007488] ACPI: Reserving FACS table memory at [mem 0x2ff56000-0x2ff5603f] [ 0.007489] ACPI: Reserving UEFI table memory at [mem 0x2fffc000-0x2fffc235] [ 0.007489] ACPI: Reserving UEFI table memory at [mem 0x2fffb000-0x2fffb041] [ 0.007490] ACPI: Reserving MSDM table memory at [mem 0x2fffa000-0x2fffa054] [ 0.007490] ACPI: Reserving SSDT table memory at [mem 0x2fff9000-0x2fff94c2] [ 0.007491] ACPI: Reserving SSDT table memory at [mem 0x2fff8000-0x2fff8045] [ 0.007492] ACPI: Reserving TPM2 table memory at [mem 0x2fff7000-0x2fff7033] [ 0.007492] ACPI: Reserving SSDT table memory at [mem 0x2fff3000-0x2fff63a5] [ 0.007493] ACPI: Reserving ASF! table memory at [mem 0x2fff2000-0x2fff20a4] [ 0.007493] ACPI: Reserving ASPT table memory at [mem 0x2fff1000-0x2fff1033] [ 0.007494] ACPI: Reserving BOOT table memory at [mem 0x2fff0000-0x2fff0027] [ 0.007495] ACPI: Reserving DBGP table memory at [mem 0x2ffef000-0x2ffef033] [ 0.007495] ACPI: Reserving HPET table memory at [mem 0x2ffed000-0x2ffed037] [ 0.007496] ACPI: Reserving APIC table memory at [mem 0x2ffec000-0x2ffec12b] [ 0.007496] ACPI: Reserving MCFG table memory at [mem 0x2ffeb000-0x2ffeb03b] [ 0.007497] ACPI: Reserving SSDT table memory at [mem 0x2ffb8000-0x2ffb8a71] [ 0.007498] ACPI: Reserving LPIT table memory at [mem 0x2ffb7000-0x2ffb7093] [ 0.007498] ACPI: Reserving WSMT table memory at [mem 0x2ffb6000-0x2ffb6027] [ 0.007499] ACPI: Reserving SSDT table memory at [mem 0x2ffb5000-0x2ffb529e] [ 0.007503] ACPI: Reserving SSDT table memory at [mem 0x2ffb4000-0x2ffb4345] [ 0.007503] ACPI: Reserving SSDT table memory at [mem 0x2ffaf000-0x2ffb2001] [ 0.007504] ACPI: Reserving SSDT table memory at [mem 0x2ffae000-0x2ffae357] [ 0.007505] ACPI: Reserving SSDT table memory at [mem 0x2ffad000-0x2ffad305] [ 0.007505] ACPI: Reserving SSDT table memory at [mem 0x2ffac000-0x2ffac51d] [ 0.007506] ACPI: Reserving DBGP table memory at [mem 0x2ffab000-0x2ffab033] [ 0.007507] ACPI: Reserving DBG2 table memory at [mem 0x2ffaa000-0x2ffaa053] [ 0.007507] ACPI: Reserving SSDT table memory at [mem 0x2ffa9000-0x2ffa9f93] [ 0.007508] ACPI: Reserving SSDT table memory at [mem 0x2ffa7000-0x2ffa87ad] [ 0.007508] ACPI: Reserving SSDT table memory at [mem 0x2ffa1000-0x2ffa692c] [ 0.007509] ACPI: Reserving SSDT table memory at [mem 0x2ff99000-0x2ffa082f] [ 0.007510] ACPI: Reserving DMAR table memory at [mem 0x2ff98000-0x2ff980a7] [ 0.007510] ACPI: Reserving NHLT table memory at [mem 0x2ff97000-0x2ff97c1b] [ 0.007511] ACPI: Reserving FPDT table memory at [mem 0x2ff96000-0x2ff96043] [ 0.007511] ACPI: Reserving BGRT table memory at [mem 0x2ff95000-0x2ff95037] [ 0.007746] No NUMA configuration found [ 0.007748] Faking a node at [mem 0x0000000000000000-0x00000004c1ffffff] [ 0.007760] NODE_DATA(0) allocated [mem 0x4c1fd5000-0x4c1ffffff] [ 0.007914] Zone ranges: [ 0.007915] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.007917] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.007918] Normal [mem 0x0000000100000000-0x00000004c1ffffff] [ 0.007919] Device empty [ 0.007920] Movable zone start for each node [ 0.007922] Early memory node ranges [ 0.007922] node 0: [mem 0x0000000000001000-0x0000000000057fff] [ 0.007923] node 0: [mem 0x0000000000059000-0x000000000009dfff] [ 0.007924] node 0: [mem 0x0000000000100000-0x0000000016484fff] [ 0.007925] node 0: [mem 0x0000000016487000-0x0000000017a57fff] [ 0.007925] node 0: [mem 0x0000000018358000-0x000000002e56dfff] [ 0.007926] node 0: [mem 0x000000002fffe000-0x000000002fffefff] [ 0.007926] node 0: [mem 0x0000000100000000-0x00000004c1ffffff] [ 0.007928] Initmem setup node 0 [mem 0x0000000000001000-0x00000004c1ffffff] [ 0.007932] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.007933] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.007949] On node 0, zone DMA: 98 pages in unavailable ranges [ 0.008460] On node 0, zone DMA32: 2 pages in unavailable ranges [ 0.009242] On node 0, zone DMA32: 2304 pages in unavailable ranges [ 0.009293] On node 0, zone DMA32: 6800 pages in unavailable ranges [ 0.042833] On node 0, zone Normal: 1 pages in unavailable ranges [ 0.043056] On node 0, zone Normal: 24576 pages in unavailable ranges [ 0.043071] Reserving Intel graphics memory at [mem 0x39000000-0x3cffffff] [ 0.043478] ACPI: PM-Timer IO Port: 0x1808 [ 0.043483] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.043485] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.043485] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.043486] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.043487] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.043487] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.043488] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.043488] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [ 0.043489] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1]) [ 0.043489] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1]) [ 0.043490] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1]) [ 0.043490] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1]) [ 0.043491] ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1]) [ 0.043491] ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1]) [ 0.043492] ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1]) [ 0.043493] ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1]) [ 0.043522] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 [ 0.043527] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.043528] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.043532] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.043533] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.043537] e820: update [mem 0x1e516000-0x1e8e2fff] usable ==> reserved [ 0.043547] TSC deadline timer available [ 0.043548] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.043562] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.043564] PM: hibernation: Registered nosave memory: [mem 0x00058000-0x00058fff] [ 0.043565] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x000fffff] [ 0.043566] PM: hibernation: Registered nosave memory: [mem 0x15d2e000-0x15d2efff] [ 0.043568] PM: hibernation: Registered nosave memory: [mem 0x15d3e000-0x15d3efff] [ 0.043569] PM: hibernation: Registered nosave memory: [mem 0x16485000-0x16485fff] [ 0.043570] PM: hibernation: Registered nosave memory: [mem 0x16486000-0x16486fff] [ 0.043571] PM: hibernation: Registered nosave memory: [mem 0x17a58000-0x18357fff] [ 0.043572] PM: hibernation: Registered nosave memory: [mem 0x1e516000-0x1e8e2fff] [ 0.043573] PM: hibernation: Registered nosave memory: [mem 0x2e56e000-0x2f88dfff] [ 0.043574] PM: hibernation: Registered nosave memory: [mem 0x2f88e000-0x2ff7dfff] [ 0.043575] PM: hibernation: Registered nosave memory: [mem 0x2ff7e000-0x2fffdfff] [ 0.043576] PM: hibernation: Registered nosave memory: [mem 0x2ffff000-0x3cffffff] [ 0.043576] PM: hibernation: Registered nosave memory: [mem 0x3d000000-0xfebfffff] [ 0.043577] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.043577] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.043578] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff] [ 0.043578] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed0ffff] [ 0.043579] PM: hibernation: Registered nosave memory: [mem 0xfed10000-0xfed19fff] [ 0.043579] PM: hibernation: Registered nosave memory: [mem 0xfed1a000-0xfed83fff] [ 0.043580] PM: hibernation: Registered nosave memory: [mem 0xfed84000-0xfed84fff] [ 0.043581] PM: hibernation: Registered nosave memory: [mem 0xfed85000-0xfedfffff] [ 0.043581] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.043582] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xffffffff] [ 0.043583] [mem 0x3d000000-0xfebfffff] available for PCI devices [ 0.043584] Booting paravirtualized kernel on bare hardware [ 0.043586] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.043591] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.044116] percpu: Embedded 63 pages/cpu s221184 r8192 d28672 u262144 [ 0.044126] pcpu-alloc: s221184 r8192 d28672 u262144 alloc=1*2097152 [ 0.044128] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.044148] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.4.3-060403-generic root=UUID=9d73ee34-4258-4eaa-9690-c36f0155d2a8 ro quiet splash vt.handoff=7 [ 0.044209] Unknown kernel command line parameters "splash BOOT_IMAGE=/boot/vmlinuz-6.4.3-060403-generic", will be passed to user space. [ 0.046451] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.047516] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.047602] Fallback order for Node 0: 0 [ 0.047605] Built 1 zonelists, mobility grouping on. Total pages: 4063099 [ 0.047606] Policy zone: Normal [ 0.047609] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.047617] software IO TLB: area num 8. [ 0.107643] Memory: 15963276K/16511012K available (20480K kernel code, 4183K rwdata, 12848K rodata, 4704K init, 17568K bss, 547476K reserved, 0K cma-reserved) [ 0.107753] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.107761] Kernel/User page tables isolation: enabled [ 0.107807] ftrace: allocating 53804 entries in 211 pages [ 0.117022] ftrace: allocated 211 pages with 5 groups [ 0.117724] Dynamic Preempt: voluntary [ 0.117749] rcu: Preemptible hierarchical RCU implementation. [ 0.117750] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.117751] Trampoline variant of Tasks RCU enabled. [ 0.117751] Rude variant of Tasks RCU enabled. [ 0.117752] Tracing variant of Tasks RCU enabled. [ 0.117752] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.117753] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.120078] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16 [ 0.120330] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.120500] Console: colour dummy device 80x25 [ 0.120502] printk: console [tty0] enabled [ 0.120560] ACPI: Core revision 20230331 [ 0.120764] hpet: HPET dysfunctional in PC10. Force disabled. [ 0.120765] APIC: Switch to symmetric I/O mode setup [ 0.120767] DMAR: Host address width 39 [ 0.120768] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.120775] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e [ 0.120777] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.120780] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da [ 0.120782] DMAR: RMRR base: 0x0000002f755000 end: 0x0000002f774fff [ 0.120783] DMAR: RMRR base: 0x00000038800000 end: 0x0000003cffffff [ 0.120788] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.120790] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.120791] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 0.122587] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 0.122588] x2apic enabled [ 0.122609] Switched APIC routing to cluster x2apic. [ 0.126461] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x39a8208cdd2, max_idle_ns: 881590748921 ns [ 0.126486] Calibrating delay loop (skipped), value calculated using timer frequency.. 3999.93 BogoMIPS (lpj=7999872) [ 0.126488] pid_max: default: 32768 minimum: 301 [ 0.129519] LSM: initializing lsm=lockdown,capability,landlock,yama,apparmor,integrity [ 0.129554] landlock: Up and running. [ 0.129555] Yama: becoming mindful. [ 0.129592] AppArmor: AppArmor initialized [ 0.129632] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.129651] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.129856] CPU0: Thermal monitoring enabled (TM1) [ 0.129898] process: using mwait in idle threads [ 0.129901] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.129903] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.129908] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.129910] Spectre V2 : Mitigation: IBRS [ 0.129911] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.129911] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.129912] RETBleed: Mitigation: IBRS [ 0.129914] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.129914] Spectre V2 : User space: Mitigation: STIBP via prctl [ 0.129916] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.129923] MDS: Mitigation: Clear CPU buffers [ 0.129924] MMIO Stale Data: Mitigation: Clear CPU buffers [ 0.129930] SRBDS: Mitigation: Microcode [ 0.130465] Freeing SMP alternatives memory: 44K [ 0.130465] smpboot: CPU0: Intel(R) Core(TM) i7-8550U CPU @ 1.80GHz (family: 0x6, model: 0x8e, stepping: 0xa) [ 0.130465] cblist_init_generic: Setting adjustable number of callback queues. [ 0.130465] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.130465] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.130465] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.130465] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver. [ 0.130465] ... version: 4 [ 0.130465] ... bit width: 48 [ 0.130465] ... generic registers: 4 [ 0.130465] ... value mask: 0000ffffffffffff [ 0.130465] ... max period: 00007fffffffffff [ 0.130465] ... fixed-purpose events: 3 [ 0.130465] ... event mask: 000000070000000f [ 0.130465] Estimated ratio of average max frequency by base frequency (times 1024): 1894 [ 0.130465] rcu: Hierarchical SRCU implementation. [ 0.130465] rcu: Max phase no-delay instances is 1000. [ 0.130465] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.130465] smp: Bringing up secondary CPUs ... [ 0.130465] x86: Booting SMP configuration: [ 0.130465] .... node #0, CPUs: #1 #2 #3 #4 [ 0.135705] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.135705] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details. [ 0.135705] #5 #6 #7 [ 0.140257] smp: Brought up 1 node, 8 CPUs [ 0.140257] smpboot: Max logical packages: 1 [ 0.140257] smpboot: Total of 8 processors activated (31999.48 BogoMIPS) [ 0.143015] devtmpfs: initialized [ 0.143015] x86/mm: Memory block size: 128MB [ 0.143815] ACPI: PM: Registering ACPI NVS region [mem 0x16485000-0x16485fff] (4096 bytes) [ 0.143815] ACPI: PM: Registering ACPI NVS region [mem 0x2f88e000-0x2ff7dfff] (7274496 bytes) [ 0.143815] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.143815] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.143815] pinctrl core: initialized pinctrl subsystem [ 0.143815] PM: RTC time: 15:55:56, date: 2023-07-13 [ 0.143815] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.143815] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations [ 0.143815] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.143815] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.143815] audit: initializing netlink subsys (disabled) [ 0.143815] audit: type=2000 audit(1689263756.016:1): state=initialized audit_enabled=0 res=1 [ 0.143815] thermal_sys: Registered thermal governor 'fair_share' [ 0.143815] thermal_sys: Registered thermal governor 'bang_bang' [ 0.143815] thermal_sys: Registered thermal governor 'step_wise' [ 0.143815] thermal_sys: Registered thermal governor 'user_space' [ 0.143815] thermal_sys: Registered thermal governor 'power_allocator' [ 0.143815] EISA bus registered [ 0.143815] cpuidle: using governor ladder [ 0.143815] cpuidle: using governor menu [ 0.143815] Simple Boot Flag at 0x44 set to 0x1 [ 0.143815] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.143815] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.143815] PCI: not using MMCONFIG [ 0.143815] PCI: Using configuration type 1 for base access [ 0.143815] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.146547] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.146552] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.146552] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 0.146552] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.146552] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 0.146655] ACPI: Added _OSI(Module Device) [ 0.146655] ACPI: Added _OSI(Processor Device) [ 0.146655] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.146655] ACPI: Added _OSI(Processor Aggregator Device) [ 0.190196] ACPI: 15 ACPI AML tables successfully acquired and loaded [ 0.193023] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.198785] ACPI: Dynamic OEM Table Load: [ 0.198796] ACPI: SSDT 0xFFFF938981B77000 0005CD (v02 PmRef Cpu0Ist 00003000 INTL 20160527) [ 0.200333] ACPI: \_PR_.PR00: _OSC native thermal LVT Acked [ 0.202077] ACPI: Dynamic OEM Table Load: [ 0.202085] ACPI: SSDT 0xFFFF93898135CC00 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160527) [ 0.203528] ACPI: Dynamic OEM Table Load: [ 0.203535] ACPI: SSDT 0xFFFF938981BF5840 0000BA (v02 PmRef Cpu0Hwp 00003000 INTL 20160527) [ 0.204881] ACPI: Dynamic OEM Table Load: [ 0.204887] ACPI: SSDT 0xFFFF938981B75000 000628 (v02 PmRef HwpLvt 00003000 INTL 20160527) [ 0.206659] ACPI: Dynamic OEM Table Load: [ 0.206668] ACPI: SSDT 0xFFFF938981B7E000 000D14 (v02 PmRef ApIst 00003000 INTL 20160527) [ 0.208930] ACPI: Dynamic OEM Table Load: [ 0.208937] ACPI: SSDT 0xFFFF93898135FC00 000317 (v02 PmRef ApHwp 00003000 INTL 20160527) [ 0.210398] ACPI: Dynamic OEM Table Load: [ 0.210405] ACPI: SSDT 0xFFFF93898135BC00 00030A (v02 PmRef ApCst 00003000 INTL 20160527) [ 0.215171] ACPI: EC: EC started [ 0.215172] ACPI: EC: interrupt blocked [ 0.256030] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.256036] ACPI: \_SB_.PCI0.LPCB.H_EC: Boot DSDT EC used to handle transactions [ 0.256039] ACPI: Interpreter enabled [ 0.256131] ACPI: PM: (supports S0 S3 S4 S5) [ 0.256134] ACPI: Using IOAPIC for interrupt routing [ 0.260114] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.265683] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved as ACPI motherboard resource [ 0.265707] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.265709] PCI: Using E820 reservations for host bridge windows [ 0.267518] ACPI: Enabled 8 GPEs in block 00 to 7F [ 0.269085] ACPI Warning: \_SB._PLD: Return Package type mismatch at index 0 - found Package, expected Buffer (20230331/nspredef-260) [ 0.299012] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.299027] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] [ 0.302299] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC] [ 0.305031] PCI host bridge to bus 0000:00 [ 0.305033] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.305035] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.305037] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window] [ 0.305038] pci_bus 0000:00: root bus resource [mem 0x3d000000-0xdfffffff window] [ 0.305040] pci_bus 0000:00: root bus resource [mem 0x2000000000-0x2fffffffff window] [ 0.305041] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window] [ 0.305043] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.305130] pci 0000:00:00.0: [8086:5914] type 00 class 0x060000 [ 0.305212] pci 0000:00:02.0: [8086:5917] type 00 class 0x030000 [ 0.305221] pci 0000:00:02.0: reg 0x10: [mem 0x2ffa000000-0x2ffaffffff 64bit] [ 0.305228] pci 0000:00:02.0: reg 0x18: [mem 0x2fa0000000-0x2fafffffff 64bit pref] [ 0.305232] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f] [ 0.305248] pci 0000:00:02.0: BAR 2: assigned to efifb [ 0.305251] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.305462] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000 [ 0.305471] pci 0000:00:04.0: reg 0x10: [mem 0x2ffb010000-0x2ffb017fff 64bit] [ 0.305803] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330 [ 0.305823] pci 0000:00:14.0: reg 0x10: [mem 0x6e300000-0x6e30ffff 64bit] [ 0.305890] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.306606] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000 [ 0.306625] pci 0000:00:14.2: reg 0x10: [mem 0x2ffb022000-0x2ffb022fff 64bit] [ 0.306879] pci 0000:00:15.0: [8086:9d60] type 00 class 0x118000 [ 0.307025] pci 0000:00:15.0: reg 0x10: [mem 0x2ffb021000-0x2ffb021fff 64bit] [ 0.307972] pci 0000:00:15.1: [8086:9d61] type 00 class 0x118000 [ 0.308143] pci 0000:00:15.1: reg 0x10: [mem 0x2ffb020000-0x2ffb020fff 64bit] [ 0.309106] pci 0000:00:15.3: [8086:9d63] type 00 class 0x118000 [ 0.309240] pci 0000:00:15.3: reg 0x10: [mem 0x2ffb01f000-0x2ffb01ffff 64bit] [ 0.310142] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000 [ 0.310164] pci 0000:00:16.0: reg 0x10: [mem 0x2ffb01e000-0x2ffb01efff 64bit] [ 0.310236] pci 0000:00:16.0: PME# supported from D3hot [ 0.310827] pci 0000:00:19.0: [8086:9d66] type 00 class 0x118000 [ 0.310986] pci 0000:00:19.0: reg 0x10: [mem 0x2ffb01d000-0x2ffb01dfff 64bit] [ 0.311846] pci 0000:00:1c.0: [8086:9d10] type 01 class 0x060400 [ 0.311933] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.312542] pci 0000:00:1c.4: [8086:9d14] type 01 class 0x060400 [ 0.312629] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.313266] pci 0000:00:1d.0: [8086:9d18] type 01 class 0x060400 [ 0.313348] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.313984] pci 0000:00:1f.0: [8086:9d4e] type 00 class 0x060100 [ 0.314319] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000 [ 0.314335] pci 0000:00:1f.2: reg 0x10: [mem 0x6e310000-0x6e313fff] [ 0.314643] pci 0000:00:1f.3: [8086:9d71] type 00 class 0x040100 [ 0.314668] pci 0000:00:1f.3: reg 0x10: [mem 0x2ffb018000-0x2ffb01bfff 64bit] [ 0.314702] pci 0000:00:1f.3: reg 0x20: [mem 0x2ffb000000-0x2ffb00ffff 64bit] [ 0.314751] pci 0000:00:1f.3: PME# supported from D3hot D3cold [ 0.315556] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500 [ 0.315617] pci 0000:00:1f.4: reg 0x10: [mem 0x2ffb01c000-0x2ffb01c0ff 64bit] [ 0.315688] pci 0000:00:1f.4: reg 0x20: [io 0x3040-0x305f] [ 0.316048] pci 0000:00:1c.0: PCI bridge to [bus 01-6a] [ 0.316055] pci 0000:00:1c.0: bridge window [mem 0x40000000-0x6e0fffff] [ 0.316060] pci 0000:00:1c.0: bridge window [mem 0x2fb0000000-0x2ff9ffffff 64bit pref] [ 0.316278] pci 0000:6b:00.0: [8086:2725] type 00 class 0x028000 [ 0.316352] pci 0000:6b:00.0: reg 0x10: [mem 0x6e200000-0x6e203fff 64bit] [ 0.316583] pci 0000:6b:00.0: PME# supported from D0 D3hot D3cold [ 0.317227] pci 0000:00:1c.4: PCI bridge to [bus 6b] [ 0.317234] pci 0000:00:1c.4: bridge window [mem 0x6e200000-0x6e2fffff] [ 0.317500] pci 0000:6c:00.0: [144d:a808] type 00 class 0x010802 [ 0.317520] pci 0000:6c:00.0: reg 0x10: [mem 0x6e100000-0x6e103fff 64bit] [ 0.318005] pci 0000:00:1d.0: PCI bridge to [bus 6c] [ 0.318009] pci 0000:00:1d.0: bridge window [mem 0x6e100000-0x6e1fffff] [ 0.320151] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.320231] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.320310] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 [ 0.320388] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.320469] ACPI: PCI: Interrupt link LNKE configured for IRQ 11 [ 0.320548] ACPI: PCI: Interrupt link LNKF configured for IRQ 11 [ 0.320626] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 0.320705] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 [ 0.332425] Low-power S0 idle used by default for system suspend [ 0.338574] ACPI Warning: GPE type mismatch (level/edge) (20230331/evxface-791) [ 0.338598] ACPI: EC: interrupt unblocked [ 0.338599] ACPI: EC: event unblocked [ 0.338611] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.338612] ACPI: EC: GPE=0x50 [ 0.338613] ACPI: \_SB_.PCI0.LPCB.H_EC: Boot DSDT EC initialization complete [ 0.338615] ACPI: \_SB_.PCI0.LPCB.H_EC: EC: Used to handle transactions and events [ 0.338685] iommu: Default domain type: Translated [ 0.338685] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.338685] SCSI subsystem initialized [ 0.338685] libata version 3.00 loaded. [ 0.338685] ACPI: bus type USB registered [ 0.338685] usbcore: registered new interface driver usbfs [ 0.338685] usbcore: registered new interface driver hub [ 0.338685] usbcore: registered new device driver usb [ 0.338685] pps_core: LinuxPPS API ver. 1 registered [ 0.338685] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.338685] PTP clock support registered [ 0.338685] EDAC MC: Ver: 3.0.0 [ 0.338934] efivars: Registered efivars operations [ 0.338934] NetLabel: Initializing [ 0.338934] NetLabel: domain hash size = 128 [ 0.338934] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.338934] NetLabel: unlabeled traffic allowed by default [ 0.338934] mctp: management component transport protocol core [ 0.338934] NET: Registered PF_MCTP protocol family [ 0.338934] PCI: Using ACPI for IRQ routing [ 0.360124] PCI: pci_cache_line_size set to 64 bytes [ 0.360896] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ 0.360901] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] [ 0.360903] e820: reserve RAM buffer [mem 0x15d2e018-0x17ffffff] [ 0.360904] e820: reserve RAM buffer [mem 0x16485000-0x17ffffff] [ 0.360905] e820: reserve RAM buffer [mem 0x17a58000-0x17ffffff] [ 0.360906] e820: reserve RAM buffer [mem 0x1e516000-0x1fffffff] [ 0.360907] e820: reserve RAM buffer [mem 0x2e56e000-0x2fffffff] [ 0.360908] e820: reserve RAM buffer [mem 0x2ffff000-0x2fffffff] [ 0.360909] e820: reserve RAM buffer [mem 0x4c2000000-0x4c3ffffff] [ 0.360950] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.360950] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.360950] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.360950] vgaarb: loaded [ 0.360950] clocksource: Switched to clocksource tsc-early [ 0.369266] VFS: Disk quotas dquot_6.6.0 [ 0.369278] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.369414] AppArmor: AppArmor Filesystem Enabled [ 0.369477] pnp: PnP ACPI init [ 0.369714] system 00:00: [mem 0xfd000000-0xfdabffff] has been reserved [ 0.369717] system 00:00: [mem 0xfdad0000-0xfdadffff] has been reserved [ 0.369719] system 00:00: [mem 0xfdb00000-0xfdffffff] has been reserved [ 0.369720] system 00:00: [mem 0xfe000000-0xfe01ffff] has been reserved [ 0.369722] system 00:00: [mem 0xfe036000-0xfe03bfff] has been reserved [ 0.369723] system 00:00: [mem 0xfe03d000-0xfe3fffff] has been reserved [ 0.369725] system 00:00: [mem 0xfe410000-0xfe7fffff] has been reserved [ 0.370040] system 00:01: [io 0x2000-0x20fe] has been reserved [ 0.370161] system 00:02: [io 0x06a4] has been reserved [ 0.370163] system 00:02: [io 0x06a0] has been reserved [ 0.370425] system 00:03: [io 0x0680-0x069f] has been reserved [ 0.370427] system 00:03: [io 0xffff] has been reserved [ 0.370428] system 00:03: [io 0xffff] has been reserved [ 0.370430] system 00:03: [io 0xffff] has been reserved [ 0.370431] system 00:03: [io 0x1800-0x18fe] has been reserved [ 0.370432] system 00:03: [io 0x164e-0x164f] has been reserved [ 0.370591] system 00:05: [io 0x1854-0x1857] has been reserved [ 0.372484] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.372487] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.372488] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.372490] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved [ 0.372491] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.372493] system 00:08: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.372495] system 00:08: [mem 0xfed45000-0xfed8ffff] could not be reserved [ 0.372496] system 00:08: [mem 0xff000000-0xffffffff] has been reserved [ 0.372498] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.372499] system 00:08: [mem 0x3d000000-0x3d01ffff] has been reserved [ 0.373319] pnp: PnP ACPI: found 9 devices [ 0.378918] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.378981] NET: Registered PF_INET protocol family [ 0.379121] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.381442] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 0.381469] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.381537] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.381742] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 0.381926] TCP: Hash tables configured (established 131072 bind 65536) [ 0.382018] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear) [ 0.382080] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.382112] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.382158] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.382164] NET: Registered PF_XDP protocol family [ 0.382171] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01-6a] add_size 1000 [ 0.382194] pci 0000:00:1c.0: BAR 13: assigned [io 0x4000-0x4fff] [ 0.382199] pci 0000:00:1c.0: PCI bridge to [bus 01-6a] [ 0.382211] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff] [ 0.382214] pci 0000:00:1c.0: bridge window [mem 0x40000000-0x6e0fffff] [ 0.382217] pci 0000:00:1c.0: bridge window [mem 0x2fb0000000-0x2ff9ffffff 64bit pref] [ 0.382222] pci 0000:00:1c.4: PCI bridge to [bus 6b] [ 0.382227] pci 0000:00:1c.4: bridge window [mem 0x6e200000-0x6e2fffff] [ 0.382233] pci 0000:00:1d.0: PCI bridge to [bus 6c] [ 0.382245] pci 0000:00:1d.0: bridge window [mem 0x6e100000-0x6e1fffff] [ 0.382251] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.382253] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.382254] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000dffff window] [ 0.382255] pci_bus 0000:00: resource 7 [mem 0x3d000000-0xdfffffff window] [ 0.382257] pci_bus 0000:00: resource 8 [mem 0x2000000000-0x2fffffffff window] [ 0.382258] pci_bus 0000:00: resource 9 [mem 0xfd000000-0xfe7fffff window] [ 0.382259] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff] [ 0.382261] pci_bus 0000:01: resource 1 [mem 0x40000000-0x6e0fffff] [ 0.382262] pci_bus 0000:01: resource 2 [mem 0x2fb0000000-0x2ff9ffffff 64bit pref] [ 0.382264] pci_bus 0000:6b: resource 1 [mem 0x6e200000-0x6e2fffff] [ 0.382265] pci_bus 0000:6c: resource 1 [mem 0x6e100000-0x6e1fffff] [ 0.384603] PCI: CLS 64 bytes, default 64 [ 0.384618] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.384619] software IO TLB: mapped [mem 0x0000000029fb1000-0x000000002dfb1000] (64MB) [ 0.384669] Trying to unpack rootfs image as initramfs... [ 0.384828] sgx: EPC section 0x30200000-0x35f7ffff [ 0.385520] Initialise system trusted keyrings [ 0.385529] Key type blacklist registered [ 0.385578] workingset: timestamp_bits=36 max_order=22 bucket_order=0 [ 0.385591] zbud: loaded [ 0.385784] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.385852] fuse: init (API version 7.38) [ 0.385976] integrity: Platform Keyring initialized [ 0.385980] integrity: Machine keyring initialized [ 0.392045] Key type asymmetric registered [ 0.392047] Asymmetric key parser 'x509' registered [ 0.392061] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243) [ 0.392120] io scheduler mq-deadline registered [ 0.392596] pcieport 0000:00:1c.0: PME: Signaling with IRQ 122 [ 0.392645] pcieport 0000:00:1c.0: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+ [ 0.392981] pcieport 0000:00:1c.4: PME: Signaling with IRQ 123 [ 0.393069] pcieport 0000:00:1c.4: AER: enabled with IRQ 123 [ 0.393373] pcieport 0000:00:1d.0: PME: Signaling with IRQ 124 [ 0.393464] pcieport 0000:00:1d.0: AER: enabled with IRQ 124 [ 0.393572] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.394388] ACPI: AC: AC Adapter [ADP1] (on-line) [ 0.394434] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1a/PNP0C09:00/PNP0C0D:00/input/input0 [ 0.394465] ACPI: button: Lid Switch [LID0] [ 0.394503] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 0.394528] ACPI: button: Power Button [PWRB] [ 0.394556] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.394576] ACPI: button: Power Button [PWRF] [ 0.397311] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.397314] ACPI: thermal: Thermal Zone [TZ00] (28 C) [ 0.397477] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.397479] ACPI: thermal: Thermal Zone [TZ01] (30 C) [ 0.397808] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.399628] hpet_acpi_add: no address or irqs in _CRS [ 0.399649] Linux agpgart interface v0.103 [ 0.412897] ACPI: battery: Slot [BAT1] (battery present) [ 0.413634] loop: module loaded [ 0.413904] tun: Universal TUN/TAP device driver, 1.6 [ 0.413938] PPP generic driver version 2.4.2 [ 0.414072] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 0.414074] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 0.415159] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.415245] mousedev: PS/2 mouse device common for all mice [ 0.415398] rtc_cmos 00:04: RTC can wake from S4 [ 0.416091] rtc_cmos 00:04: registered as rtc0 [ 0.416226] rtc_cmos 00:04: setting system clock to 2023-07-13T15:55:56 UTC (1689263756) [ 0.416257] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram [ 0.416265] i2c_dev: i2c /dev entries driver [ 0.416510] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 0.416520] device-mapper: uevent: version 1.0.3 [ 0.416566] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com [ 0.416586] platform eisa.0: Probing EISA bus 0 [ 0.416588] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 0.416589] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 0.416591] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 0.416592] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 0.416593] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 0.416594] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 0.416595] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 0.416596] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 0.416598] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 0.416599] platform eisa.0: EISA: Detected 0 cards [ 0.416601] intel_pstate: Intel P-state driver initializing [ 0.417048] intel_pstate: HWP enabled [ 0.417109] ledtrig-cpu: registered to indicate activity on CPUs [ 0.417127] efifb: probing for efifb [ 0.417176] efifb: showing boot graphics [ 0.422882] efifb: framebuffer at 0x2fa0000000, using 32400k, total 32400k [ 0.422885] efifb: mode is 3840x2160x32, linelength=15360, pages=1 [ 0.422887] efifb: scrolling: redraw [ 0.422887] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.422952] fbcon: Deferring console take-over [ 0.422953] fb0: EFI VGA frame buffer device [ 0.423052] intel_pmc_core INT33A1:00: initialized [ 0.423170] drop_monitor: Initializing network drop monitor service [ 0.424383] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.437250] NET: Registered PF_INET6 protocol family [ 0.686018] Freeing initrd memory: 67640K [ 0.692287] Segment Routing with IPv6 [ 0.692299] In-situ OAM (IOAM) with IPv6 [ 0.692326] NET: Registered PF_PACKET protocol family [ 0.692458] Key type dns_resolver registered [ 0.693451] microcode: Microcode Update Driver: v2.2. [ 0.693456] IPI shorthand broadcast: enabled [ 0.694858] sched_clock: Marking stable (688001773, 6002409)->(732226184, -38222002) [ 0.695177] registered taskstats version 1 [ 0.696116] Loading compiled-in X.509 certificates [ 0.696594] Loaded X.509 cert 'Build time autogenerated kernel key: 68e53a69879985ab4a16752925dd0ad351ef99a9' [ 0.696965] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969' [ 0.697327] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19' [ 0.697331] blacklist: Loading compiled-in revocation X.509 certificates [ 0.697346] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing: 61482aa2830d0ab2ad5af10b7250da9033ddcef0' [ 0.697360] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2017): 242ade75ac4a15e50d50c84b0d45ff3eae707a03' [ 0.697372] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (ESM 2018): 365188c1d374d6b07c3c8f240f8ef722433d6a8b' [ 0.697385] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2019): c0746fd6c5da3ae827864651ad66ae47fe24b3e8' [ 0.697396] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v1): a8d54bbb3825cfb94fa13c9f8a594a195c107b8d' [ 0.697407] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v2): 4cf046892d6fd3c9a5b03f98d845f90851dc6a8c' [ 0.697419] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v3): 100437bb6de6e469b581e61cd66bce3ef4ed53af' [ 0.697430] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (Ubuntu Core 2019): c1d57b8f6b743f23ee41f4f7ee292f06eecadfb9' [ 0.699107] Key type .fscrypt registered [ 0.699109] Key type fscrypt-provisioning registered [ 0.699345] Key type trusted registered [ 0.702365] Key type encrypted registered [ 0.702368] AppArmor: AppArmor sha1 policy hashing enabled [ 0.704499] integrity: Loading X.509 certificate: UEFI:db [ 0.704540] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' [ 0.704541] integrity: Loading X.509 certificate: UEFI:db [ 0.704562] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' [ 0.704563] integrity: Loading X.509 certificate: UEFI:db [ 0.704573] integrity: Loaded X.509 cert '8GAriel: a88fde0b694da7b14d3f5d79bdaeecbe' [ 0.704574] integrity: Loading X.509 certificate: UEFI:db [ 0.704583] integrity: Loaded X.509 cert 'Mocca: eee4ae78c24bf4a5488b6b77c611edde' [ 0.704584] integrity: Loading X.509 certificate: UEFI:db [ 0.704945] integrity: Loaded X.509 cert 'LCFC: 16e5000ec0e008a3434536c06d55a3b6' [ 0.708604] Loading compiled-in module X.509 certificates [ 0.709016] Loaded X.509 cert 'Build time autogenerated kernel key: 68e53a69879985ab4a16752925dd0ad351ef99a9' [ 0.709018] ima: Allocated hash algorithm: sha1 [ 0.734694] ima: No architecture policies found [ 0.734758] evm: Initialising EVM extended attributes: [ 0.734762] evm: security.selinux [ 0.734766] evm: security.SMACK64 [ 0.734770] evm: security.SMACK64EXEC [ 0.734773] evm: security.SMACK64TRANSMUTE [ 0.734776] evm: security.SMACK64MMAP [ 0.734780] evm: security.apparmor [ 0.734783] evm: security.ima [ 0.734786] evm: security.capability [ 0.734789] evm: HMAC attrs: 0x1 [ 0.735973] PM: Magic number: 15:464:942 [ 0.755495] RAS: Correctable Errors collector initialized. [ 0.755673] clk: Disabling unused clocks [ 0.758856] Freeing unused decrypted memory: 2036K [ 0.760375] Freeing unused kernel image (initmem) memory: 4704K [ 0.782128] Write protecting the kernel read-only data: 34816k [ 0.783025] Freeing unused kernel image (rodata/data gap) memory: 1488K [ 0.843016] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.843017] x86/mm: Checking user space page tables [ 0.880559] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.880564] Run /init as init process [ 0.880565] with arguments: [ 0.880566] /init [ 0.880567] splash [ 0.880567] with environment: [ 0.880568] HOME=/ [ 0.880569] TERM=linux [ 0.880570] BOOT_IMAGE=/boot/vmlinuz-6.4.3-060403-generic [ 0.997178] hid: raw HID events driver (C) Jiri Kosina [ 1.002954] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.002960] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 1.003816] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002) [ 1.004045] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000081109810 [ 1.004074] idma64 idma64.0: Found Intel integrated DMA 64-bit [ 1.005546] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.005550] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 1.005553] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 1.005609] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.04 [ 1.005612] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.005615] usb usb1: Product: xHCI Host Controller [ 1.005622] usb usb1: Manufacturer: Linux 6.4.3-060403-generic xhci-hcd [ 1.005625] usb usb1: SerialNumber: 0000:00:14.0 [ 1.006759] hub 1-0:1.0: USB hub found [ 1.007507] hub 1-0:1.0: 12 ports detected [ 1.009111] i801_smbus 0000:00:1f.4: SPD Write Disable is set [ 1.009154] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt [ 1.009262] pci 0000:00:1f.1: [8086:9d20] type 00 class 0x058000 [ 1.009328] pci 0000:00:1f.1: reg 0x10: [mem 0xfd000000-0xfdffffff 64bit] [ 1.018709] i2c i2c-0: 2/2 memory slots populated (from DMI) [ 1.021334] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.04 [ 1.021338] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.021341] usb usb2: Product: xHCI Host Controller [ 1.021343] usb usb2: Manufacturer: Linux 6.4.3-060403-generic xhci-hcd [ 1.021345] usb usb2: SerialNumber: 0000:00:14.0 [ 1.021550] hub 2-0:1.0: USB hub found [ 1.021573] hub 2-0:1.0: 6 ports detected [ 1.021849] nvme nvme0: pci function 0000:6c:00.0 [ 1.024412] usb: port power management may be unreliable [ 1.027047] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002) [ 1.027395] idma64 idma64.1: Found Intel integrated DMA 64-bit [ 1.028582] nvme nvme0: Shutdown timeout set to 8 seconds [ 1.037318] nvme nvme0: 8/0/0 default/read/poll queues [ 1.037550] intel-lpss 0000:00:15.3: enabling device (0000 -> 0002) [ 1.037840] idma64 idma64.2: Found Intel integrated DMA 64-bit [ 1.041533] nvme0n1: p1 p2 p3 p4 p5 p6 p7 [ 1.046836] intel-lpss 0000:00:19.0: enabling device (0000 -> 0002) [ 1.195355] input: SYNA2B31:00 06CB:CD3E Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-SYNA2B31:00/0018:06CB:CD3E.0001/input/input4 [ 1.195992] input: SYNA2B31:00 06CB:CD3E Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-SYNA2B31:00/0018:06CB:CD3E.0001/input/input5 [ 1.196849] hid-generic 0018:06CB:CD3E.0001: input,hidraw0: I2C HID v1.00 Mouse [SYNA2B31:00 06CB:CD3E] on i2c-SYNA2B31:00 [ 1.274019] usb 1-1: new high-speed USB device number 2 using xhci_hcd [ 1.299828] input: WCOM5195:00 056A:5195 Touchscreen as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-WCOM5195:00/0018:056A:5195.0002/input/input7 [ 1.299982] input: WCOM5195:00 056A:5195 as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-WCOM5195:00/0018:056A:5195.0002/input/input8 [ 1.300077] input: WCOM5195:00 056A:5195 Stylus as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-WCOM5195:00/0018:056A:5195.0002/input/input9 [ 1.300240] input: WCOM5195:00 056A:5195 as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-WCOM5195:00/0018:056A:5195.0002/input/input10 [ 1.300410] input: WCOM5195:00 056A:5195 Mouse as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-WCOM5195:00/0018:056A:5195.0002/input/input11 [ 1.300473] hid-generic 0018:056A:5195.0002: input,hidraw1: I2C HID v1.00 Mouse [WCOM5195:00 056A:5195] on i2c-WCOM5195:00 [ 1.301238] usbcore: registered new interface driver usbhid [ 1.301240] usbhid: USB HID core driver [ 1.406055] tsc: Refined TSC clocksource calibration: 1991.999 MHz [ 1.406059] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x396d4ffc055, max_idle_ns: 881590662783 ns [ 1.406106] clocksource: Switched to clocksource tsc [ 1.438601] hid-generic 0018:048D:8380.0003: hidraw2: I2C HID v1.00 Device [ITE8353:00 048D:8380] on i2c-ITE8353:00 [ 1.453901] usb 1-1: New USB device found, idVendor=04f2, idProduct=b61e, bcdDevice= 4.25 [ 1.453906] usb 1-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 1.453909] usb 1-1: Product: Integrated Camera [ 1.453911] usb 1-1: Manufacturer: Chicony Electronics Co.,Ltd. [ 1.453912] usb 1-1: SerialNumber: 0001 [ 1.586131] usb 1-5: new full-speed USB device number 3 using xhci_hcd [ 1.674374] input: Wacom HID 5195 Pen as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-WCOM5195:00/0018:056A:5195.0002/input/input12 [ 1.675036] input: Wacom HID 5195 Finger as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-WCOM5195:00/0018:056A:5195.0002/input/input13 [ 1.675841] wacom 0018:056A:5195.0002: hidraw1: I2C HID v1.00 Mouse [WCOM5195:00 056A:5195] on i2c-WCOM5195:00 [ 1.736221] usb 1-5: New USB device found, idVendor=06cb, idProduct=0081, bcdDevice= 1.64 [ 1.736239] usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=1 [ 1.736247] usb 1-5: SerialNumber: 9ab29886b648 [ 1.866096] usb 1-8: new full-speed USB device number 4 using xhci_hcd [ 2.015889] usb 1-8: New USB device found, idVendor=8087, idProduct=0032, bcdDevice= 0.00 [ 2.015905] usb 1-8: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.069353] fbcon: Taking over console [ 2.069476] Console: switching to colour frame buffer device 240x67 [ 2.088663] EXT4-fs (nvme0n1p6): mounted filesystem 9d73ee34-4258-4eaa-9690-c36f0155d2a8 ro with ordered data mode. Quota mode: none. [ 2.206354] systemd[1]: RTC configured in localtime, applying delta of -240 minutes to system time. [ 2.214764] systemd[1]: Inserted module 'autofs4' [ 2.307593] systemd[1]: systemd 249.11-0ubuntu3.9 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) [ 2.307722] systemd[1]: Detected architecture x86-64. [ 2.308001] systemd[1]: Hostname set to . [ 2.325284] memfd_create() without MFD_EXEC nor MFD_NOEXEC_SEAL, pid=1 'systemd' [ 2.342354] block nvme0n1: the capability attribute has been deprecated. [ 2.396035] systemd[1]: /etc/systemd/system/teamviewerd.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/teamviewerd.pid → /run/teamviewerd.pid; please update the unit file accordingly. [ 2.445470] systemd[1]: Queued start job for default target Graphical Interface. [ 2.471902] systemd[1]: Created slice Slice /system/modprobe. [ 2.473263] systemd[1]: Created slice Slice /system/systemd-fsck. [ 2.474132] systemd[1]: Created slice User and Session Slice. [ 2.474455] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 2.475150] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 2.475391] systemd[1]: Reached target User and Group Name Lookups. [ 2.475475] systemd[1]: Reached target Remote File Systems. [ 2.475526] systemd[1]: Reached target Slice Units. [ 2.475588] systemd[1]: Reached target Mounting snaps. [ 2.475690] systemd[1]: Reached target Local Verity Protected Volumes. [ 2.476197] systemd[1]: Listening on Syslog Socket. [ 2.476658] systemd[1]: Listening on fsck to fsckd communication Socket. [ 2.476917] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 2.477735] systemd[1]: Listening on Journal Audit Socket. [ 2.478163] systemd[1]: Listening on Journal Socket (/dev/log). [ 2.478655] systemd[1]: Listening on Journal Socket. [ 2.479216] systemd[1]: Listening on udev Control Socket. [ 2.479627] systemd[1]: Listening on udev Kernel Socket. [ 2.482810] systemd[1]: Mounting Huge Pages File System... [ 2.486128] systemd[1]: Mounting POSIX Message Queue File System... [ 2.489919] systemd[1]: Mounting Kernel Debug File System... [ 2.491726] systemd[1]: Mounting Kernel Trace File System... [ 2.493336] systemd[1]: Starting Journal Service... [ 2.494318] systemd[1]: Starting Set the console keyboard layout... [ 2.495149] systemd[1]: Starting Create List of Static Device Nodes... [ 2.496012] systemd[1]: Starting Load Kernel Module chromeos_pstore... [ 2.497285] systemd[1]: Starting Load Kernel Module configfs... [ 2.498605] systemd[1]: Starting Load Kernel Module drm... [ 2.499823] systemd[1]: Starting Load Kernel Module efi_pstore... [ 2.501234] systemd[1]: Starting Load Kernel Module fuse... [ 2.502763] systemd[1]: Starting Load Kernel Module pstore_blk... [ 2.503901] systemd[1]: Starting Load Kernel Module pstore_zone... [ 2.504253] pstore: Using crash dump compression: deflate [ 2.505839] systemd[1]: Starting Load Kernel Module ramoops... [ 2.506346] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 2.508670] systemd[1]: Starting Load Kernel Modules... [ 2.510729] systemd[1]: Starting Remount Root and Kernel File Systems... [ 2.512968] systemd[1]: Starting Coldplug All udev Devices... [ 2.516410] systemd[1]: Mounted Huge Pages File System. [ 2.516686] systemd[1]: Mounted POSIX Message Queue File System. [ 2.516898] systemd[1]: Mounted Kernel Debug File System. [ 2.517133] systemd[1]: Mounted Kernel Trace File System. [ 2.517781] systemd[1]: Finished Create List of Static Device Nodes. [ 2.518604] systemd[1]: modprobe@configfs.service: Deactivated successfully. [ 2.519115] systemd[1]: Finished Load Kernel Module configfs. [ 2.519686] systemd[1]: modprobe@fuse.service: Deactivated successfully. [ 2.520094] systemd[1]: Finished Load Kernel Module fuse. [ 2.520827] systemd[1]: modprobe@pstore_blk.service: Deactivated successfully. [ 2.521338] systemd[1]: Finished Load Kernel Module pstore_blk. [ 2.521962] systemd[1]: modprobe@pstore_zone.service: Deactivated successfully. [ 2.522586] systemd[1]: Finished Load Kernel Module pstore_zone. [ 2.523201] systemd[1]: modprobe@ramoops.service: Deactivated successfully. [ 2.523784] systemd[1]: Finished Load Kernel Module ramoops. [ 2.525739] systemd[1]: Mounting FUSE Control File System... [ 2.527858] systemd[1]: Mounting Kernel Configuration File System... [ 2.528105] EXT4-fs (nvme0n1p6): re-mounted 9d73ee34-4258-4eaa-9690-c36f0155d2a8 r/w. Quota mode: none. [ 2.532340] systemd[1]: Finished Remount Root and Kernel File Systems. [ 2.532636] systemd[1]: Mounted FUSE Control File System. [ 2.534042] systemd[1]: Activating swap /swapfile... [ 2.536033] systemd[1]: Starting Load/Save Random Seed... [ 2.537907] systemd[1]: Starting Create System Users... [ 2.538811] Adding 2097148k swap on /swapfile. Priority:-2 extents:16 across:304218112k SSFS [ 2.538958] systemd[1]: Activated swap /swapfile. [ 2.539214] systemd[1]: Reached target Swaps. [ 2.543950] systemd[1]: Mounted Kernel Configuration File System. [ 2.552056] pstore: Registered efi_pstore as persistent store backend [ 2.554788] systemd[1]: Finished Load/Save Random Seed. [ 2.554963] systemd[1]: Condition check resulted in First Boot Complete being skipped. [ 2.561022] systemd[1]: Finished Create System Users. [ 2.562617] systemd[1]: Starting Create Static Device Nodes in /dev... [ 2.566075] systemd[1]: Started Journal Service. [ 2.570736] ACPI: bus type drm_connector registered [ 2.572714] systemd-journald[253]: Received client request to flush runtime journal. [ 2.576041] lp: driver loaded but no devices found [ 2.579067] ppdev: user-space parallel port driver [ 2.582803] loop0: detected capacity change from 0 to 8 [ 2.584005] loop1: detected capacity change from 0 to 19608 [ 2.585951] loop2: detected capacity change from 0 to 242136 [ 2.586939] loop3: detected capacity change from 0 to 242136 [ 2.588211] loop4: detected capacity change from 0 to 114000 [ 2.589468] loop5: detected capacity change from 0 to 129936 [ 2.590661] loop6: detected capacity change from 0 to 129944 [ 2.592518] loop7: detected capacity change from 0 to 151256 [ 2.594163] loop8: detected capacity change from 0 to 151256 [ 2.596006] loop9: detected capacity change from 0 to 501752 [ 2.597283] loop10: detected capacity change from 0 to 501768 [ 2.598592] loop11: detected capacity change from 0 to 447264 [ 2.600033] loop12: detected capacity change from 0 to 716168 [ 2.602531] loop13: detected capacity change from 0 to 716176 [ 2.602923] loop14: detected capacity change from 0 to 955472 [ 2.604711] loop15: detected capacity change from 0 to 994336 [ 2.606513] loop16: detected capacity change from 0 to 705784 [ 2.607758] loop17: detected capacity change from 0 to 707104 [ 2.609061] loop18: detected capacity change from 0 to 187776 [ 2.611046] loop19: detected capacity change from 0 to 229456 [ 2.611599] loop20: detected capacity change from 0 to 229680 [ 2.613483] loop21: detected capacity change from 0 to 94064 [ 2.615176] loop22: detected capacity change from 0 to 25240 [ 2.616814] loop23: detected capacity change from 0 to 102072 [ 2.617972] loop24: detected capacity change from 0 to 109072 [ 2.619823] loop25: detected capacity change from 0 to 608 [ 2.622553] loop26: detected capacity change from 0 to 904 [ 2.807903] Consider using thermal netlink events interface [ 2.862947] input: Ideapad extra buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input15 [ 2.889792] dw-apb-uart.3: ttyS4 at MMIO 0x2ffb01d000 (irq = 32, base_baud = 115200) is a 16550A [ 2.890313] mei_me 0000:00:16.0: enabling device (0004 -> 0006) [ 2.895959] intel_rapl_common: Found RAPL domain package [ 2.895963] intel_rapl_common: Found RAPL domain dram [ 2.900401] ideapad_acpi VPC2004:00: DYTC_VERSION 4 support may not work. Pass ideapad_laptop.allow_v4_dytc=Y on the kernel commandline to enable [ 2.900405] ideapad_acpi VPC2004:00: DYTC interface is not available [ 2.936795] mc: Linux media interface: v0.10 [ 2.937989] Bluetooth: Core ver 2.22 [ 2.938015] NET: Registered PF_BLUETOOTH protocol family [ 2.938017] Bluetooth: HCI device and connection manager initialized [ 2.938021] Bluetooth: HCI socket layer initialized [ 2.938023] Bluetooth: L2CAP socket layer initialized [ 2.938027] Bluetooth: SCO socket layer initialized [ 2.966810] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 2.967030] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 2.967336] input: Lenovo Yoga Tablet Mode Control switch as /devices/platform/PNP0C14:02/wmi_bus/wmi_bus-PNP0C14:02/06129D99-6083-4164-81AD-F092F9D773A6/input/input16 [ 2.994045] videodev: Linux video capture interface: v2.00 [ 2.999809] Intel(R) Wireless WiFi driver for Linux [ 3.005686] Bluetooth: hci0: Device revision is 0 [ 3.005691] Bluetooth: hci0: Secure boot is enabled [ 3.005692] Bluetooth: hci0: OTP lock is enabled [ 3.005694] Bluetooth: hci0: API lock is enabled [ 3.005695] Bluetooth: hci0: Debug lock is disabled [ 3.005696] Bluetooth: hci0: Minimum firmware build 1 week 10 2014 [ 3.005698] Bluetooth: hci0: Bootloader timestamp 2019.40 buildtype 1 build 38 [ 3.005759] usbcore: registered new interface driver btusb [ 3.012226] Bluetooth: hci0: Found device firmware: intel/ibt-0041-0041.sfi [ 3.012343] Bluetooth: hci0: Boot Address: 0x100800 [ 3.012346] Bluetooth: hci0: Firmware Version: 132-5.22 [ 3.015637] iwlwifi 0000:6b:00.0: Detected crf-id 0x400410, cnv-id 0x400410 wfpm id 0x80000000 [ 3.015757] iwlwifi 0000:6b:00.0: PCI dev 2725/1674, rev=0x420, rfid=0x10d000 [ 3.016868] iwlwifi 0000:6b:00.0: Direct firmware load for iwlwifi-ty-a0-gf-a0-78.ucode failed with error -2 [ 3.017176] iwlwifi 0000:6b:00.0: Direct firmware load for iwlwifi-ty-a0-gf-a0-77.ucode failed with error -2 [ 3.017411] iwlwifi 0000:6b:00.0: Direct firmware load for iwlwifi-ty-a0-gf-a0-76.ucode failed with error -2 [ 3.017452] iwlwifi 0000:6b:00.0: Direct firmware load for iwlwifi-ty-a0-gf-a0-75.ucode failed with error -2 [ 3.017583] iwlwifi 0000:6b:00.0: Direct firmware load for iwlwifi-ty-a0-gf-a0-74.ucode failed with error -2 [ 3.017705] iwlwifi 0000:6b:00.0: Direct firmware load for iwlwifi-ty-a0-gf-a0-73.ucode failed with error -2 [ 3.017743] iwlwifi 0000:6b:00.0: Direct firmware load for iwlwifi-ty-a0-gf-a0-72.ucode failed with error -2 [ 3.017880] iwlwifi 0000:6b:00.0: Direct firmware load for iwlwifi-ty-a0-gf-a0-71.ucode failed with error -2 [ 3.018026] iwlwifi 0000:6b:00.0: Direct firmware load for iwlwifi-ty-a0-gf-a0-70.ucode failed with error -2 [ 3.018063] iwlwifi 0000:6b:00.0: Direct firmware load for iwlwifi-ty-a0-gf-a0-69.ucode failed with error -2 [ 3.018098] iwlwifi 0000:6b:00.0: Direct firmware load for iwlwifi-ty-a0-gf-a0-68.ucode failed with error -2 [ 3.018131] iwlwifi 0000:6b:00.0: Direct firmware load for iwlwifi-ty-a0-gf-a0-67.ucode failed with error -2 [ 3.018169] iwlwifi 0000:6b:00.0: Direct firmware load for iwlwifi-ty-a0-gf-a0-66.ucode failed with error -2 [ 3.018206] iwlwifi 0000:6b:00.0: Direct firmware load for iwlwifi-ty-a0-gf-a0-65.ucode failed with error -2 [ 3.018244] iwlwifi 0000:6b:00.0: Direct firmware load for iwlwifi-ty-a0-gf-a0-64.ucode failed with error -2 [ 3.018277] iwlwifi 0000:6b:00.0: Direct firmware load for iwlwifi-ty-a0-gf-a0-63.ucode failed with error -2 [ 3.018309] iwlwifi 0000:6b:00.0: Direct firmware load for iwlwifi-ty-a0-gf-a0-62.ucode failed with error -2 [ 3.018345] iwlwifi 0000:6b:00.0: Direct firmware load for iwlwifi-ty-a0-gf-a0-61.ucode failed with error -2 [ 3.018379] iwlwifi 0000:6b:00.0: Direct firmware load for iwlwifi-ty-a0-gf-a0-60.ucode failed with error -2 [ 3.028999] iwlwifi 0000:6b:00.0: api flags index 2 larger than supported by driver [ 3.029017] iwlwifi 0000:6b:00.0: TLV_FW_FSEQ_VERSION: FSEQ Version: 93.8.63.28 [ 3.029319] iwlwifi 0000:6b:00.0: loaded firmware version 59.601f3a66.0 ty-a0-gf-a0-59.ucode op_mode iwlmvm [ 3.035938] usb 1-1: Found UVC 1.00 device Integrated Camera (04f2:b61e) [ 3.058125] usbcore: registered new interface driver uvcvideo [ 3.062423] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer [ 3.062427] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 3.062428] RAPL PMU: hw unit of domain package 2^-14 Joules [ 3.062430] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 3.062431] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 3.062432] RAPL PMU: hw unit of domain psys 2^-14 Joules [ 3.070776] cryptd: max_cpu_qlen set to 1000 [ 3.095893] EXT4-fs (nvme0n1p7): mounted filesystem 6b9a452b-3696-4305-b96b-b2bffeab3a06 r/w with ordered data mode. Quota mode: none. [ 3.518598] AVX2 version of gcm_enc/dec engaged. [ 3.529275] AES CTR mode by8 optimization enabled [ 3.530457] intel_rapl_common: Found RAPL domain package [ 3.530460] intel_rapl_common: Found RAPL domain core [ 3.530462] intel_rapl_common: Found RAPL domain uncore [ 3.530464] intel_rapl_common: Found RAPL domain dram [ 3.530465] intel_rapl_common: Found RAPL domain psys [ 3.536295] input: SYNA2B31:00 06CB:CD3E Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-SYNA2B31:00/0018:06CB:CD3E.0001/input/input17 [ 3.538388] input: SYNA2B31:00 06CB:CD3E Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-SYNA2B31:00/0018:06CB:CD3E.0001/input/input18 [ 3.545066] hid-multitouch 0018:06CB:CD3E.0001: input,hidraw0: I2C HID v1.00 Mouse [SYNA2B31:00 06CB:CD3E] on i2c-SYNA2B31:00 [ 3.555987] Console: switching to colour dummy device 80x25 [ 3.556276] i915 0000:00:02.0: vgaarb: deactivate vga console [ 3.556675] iwlwifi 0000:6b:00.0: Detected Killer(R) Wi-Fi 6E AX1675x 160MHz Wireless Network Adapter (210NGW), REV=0x420 [ 3.556822] thermal thermal_zone6: failed to read out thermal zone (-61) [ 3.560051] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 3.561662] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) [ 3.566353] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915]) [ 3.590151] audit: type=1400 audit(1689278159.670:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=497 comm="apparmor_parser" [ 3.592371] audit: type=1400 audit(1689278159.670:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=498 comm="apparmor_parser" [ 3.592398] audit: type=1400 audit(1689278159.670:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=498 comm="apparmor_parser" [ 3.598581] audit: type=1400 audit(1689278159.678:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=501 comm="apparmor_parser" [ 3.598587] audit: type=1400 audit(1689278159.678:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=501 comm="apparmor_parser" [ 3.598590] audit: type=1400 audit(1689278159.678:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=501 comm="apparmor_parser" [ 3.601871] audit: type=1400 audit(1689278159.678:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=504 comm="apparmor_parser" [ 3.603839] audit: type=1400 audit(1689278159.682:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=505 comm="apparmor_parser" [ 3.603846] audit: type=1400 audit(1689278159.682:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=505 comm="apparmor_parser" [ 3.604698] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100 [ 3.604705] snd_hda_intel 0000:00:1f.3: Digital mics found on Skylake+ platform, using SST driver [ 3.649857] i915 0000:00:02.0: [drm] [ENCODER:102:DDI B/PHY B] is disabled/in DSI mode with an ungated DDI clock, gate it [ 3.651758] i915 0000:00:02.0: [drm] [ENCODER:113:DDI C/PHY C] is disabled/in DSI mode with an ungated DDI clock, gate it [ 3.691576] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0 [ 3.694510] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 3.695068] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input20 [ 3.707903] fbcon: i915drmfb (fb0) is primary device [ 3.726772] iwlwifi 0000:6b:00.0: WFPM_UMAC_PD_NOTIFICATION: 0x1f [ 3.726787] iwlwifi 0000:6b:00.0: WFPM_LMAC2_PD_NOTIFICATION: 0x1f [ 3.726814] iwlwifi 0000:6b:00.0: WFPM_AUTH_KEY_0: 0x90 [ 3.726825] iwlwifi 0000:6b:00.0: CNVI_SCU_SEQ_DATA_DW9: 0x0 [ 3.727656] iwlwifi 0000:6b:00.0: Detected RF GF, rfid=0x10d000 [ 3.794516] iwlwifi 0000:6b:00.0: base HW address: 00:93:37:55:bd:1f [ 3.812457] iwlwifi 0000:6b:00.0 wlp107s0: renamed from wlan0 [ 4.435574] Bluetooth: hci0: Failed to send firmware data (-38) [ 4.435701] Bluetooth: hci0: Intel reset sent to retry FW download [ 4.438438] usb 1-8: USB disconnect, device number 4 [ 4.594520] Bluetooth: hci0: sending frame failed (-19) [ 4.594600] Bluetooth: hci0: Reading supported features failed (-19) [ 4.594610] Bluetooth: hci0: Error reading debug features [ 4.594693] Bluetooth: hci0: sending frame failed (-19) [ 4.594763] Bluetooth: hci0: Failed to read MSFT supported features (-19) [ 4.902158] usb 1-8: new full-speed USB device number 5 using xhci_hcd [ 4.926354] Console: switching to colour frame buffer device 240x67 [ 4.952289] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device [ 4.994394] intel_tcc_cooling: Programmable TCC Offset detected [ 5.005516] snd_soc_skl 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100 [ 5.005523] snd_soc_skl 0000:00:1f.3: Digital mics found on Skylake+ platform, using SST driver [ 5.009064] snd_soc_skl 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 5.058961] usb 1-8: New USB device found, idVendor=8087, idProduct=0032, bcdDevice= 0.00 [ 5.058968] usb 1-8: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.075531] HDMI HDA Codec ehdaudio0D2: Max dais supported: 3 [ 5.079691] Bluetooth: hci0: Device revision is 0 [ 5.079697] Bluetooth: hci0: Secure boot is enabled [ 5.079698] Bluetooth: hci0: OTP lock is enabled [ 5.079699] Bluetooth: hci0: API lock is enabled [ 5.079701] Bluetooth: hci0: Debug lock is disabled [ 5.079702] Bluetooth: hci0: Minimum firmware build 1 week 10 2014 [ 5.079704] Bluetooth: hci0: Bootloader timestamp 2019.40 buildtype 1 build 38 [ 5.085411] Bluetooth: hci0: Found device firmware: intel/ibt-0041-0041.sfi [ 5.085535] Bluetooth: hci0: Boot Address: 0x100800 [ 5.085538] Bluetooth: hci0: Firmware Version: 132-5.22 [ 5.144749] snd_soc_skl 0000:00:1f.3: Direct firmware load for 9d71-LENOVO-CB-01-1-tplg.bin failed with error -2 [ 5.144876] snd_soc_skl 0000:00:1f.3: tplg fw 9d71-LENOVO-CB-01-1-tplg.bin load failed with -2, trying alternative tplg name skl_hda_dsp_generic-tplg.bin [ 5.157595] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: Parent card not yet available, widget card binding deferred [ 5.172512] debugfs: File 'DMIC01 Rx' in directory 'dapm' already present! [ 5.173643] HDMI HDA Codec ehdaudio0D2: hdac_hdmi_present_sense: disconnect for pin:port 5:0 [ 5.173846] HDMI HDA Codec ehdaudio0D2: hdac_hdmi_present_sense: disconnect for pin:port 6:0 [ 5.174149] HDMI HDA Codec ehdaudio0D2: hdac_hdmi_present_sense: disconnect for pin:port 7:0 [ 5.184004] snd_hda_codec_realtek ehdaudio0D0: autoconfig for ALC298: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 5.184013] snd_hda_codec_realtek ehdaudio0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 5.184016] snd_hda_codec_realtek ehdaudio0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 5.184019] snd_hda_codec_realtek ehdaudio0D0: mono: mono_out=0x0 [ 5.184021] snd_hda_codec_realtek ehdaudio0D0: inputs: [ 5.184023] snd_hda_codec_realtek ehdaudio0D0: Mic=0x18 [ 5.243822] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 5.243827] Bluetooth: BNEP filters: protocol multicast [ 5.243832] Bluetooth: BNEP socket layer initialized [ 5.260740] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget hifi3 overwritten [ 5.260752] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget hifi2 overwritten [ 5.260759] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget hifi1 overwritten [ 5.271681] input: hda-dsp Mic as /devices/platform/skl_hda_dsp_generic/sound/card0/input21 [ 5.271754] input: hda-dsp Headphone as /devices/platform/skl_hda_dsp_generic/sound/card0/input22 [ 5.271816] input: hda-dsp HDMI/DP, pcm=17 Jack as /devices/platform/skl_hda_dsp_generic/sound/card0/input23 [ 5.271876] input: hda-dsp HDMI/DP, pcm=18 Jack as /devices/platform/skl_hda_dsp_generic/sound/card0/input24 [ 5.271966] input: hda-dsp HDMI/DP, pcm=19 Jack as /devices/platform/skl_hda_dsp_generic/sound/card0/input25 [ 5.460960] kauditd_printk_skb: 53 callbacks suppressed [ 5.460962] audit: type=1400 audit(1689278161.538:64): apparmor="DENIED" operation="capable" class="cap" profile="/usr/sbin/cupsd" pid=742 comm="cupsd" capability=12 capname="net_admin" [ 5.568296] iwlwifi 0000:6b:00.0: WFPM_UMAC_PD_NOTIFICATION: 0x1f [ 5.568327] iwlwifi 0000:6b:00.0: WFPM_LMAC2_PD_NOTIFICATION: 0x1f [ 5.568342] iwlwifi 0000:6b:00.0: WFPM_AUTH_KEY_0: 0x90 [ 5.568356] iwlwifi 0000:6b:00.0: CNVI_SCU_SEQ_DATA_DW9: 0x0 [ 5.642693] iwlwifi 0000:6b:00.0: Registered PHC clock: iwlwifi-PTP, with index: 0 [ 5.831487] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [ 5.831520] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [ 5.831568] ------------[ cut here ]------------ [ 5.831570] memcpy: detected field-spanning write (size 2984) of single field "&cpr_mconfig->gtw_cfg.config_data" at sound/soc/intel/skylake/skl-messages.c:552 (size 4) [ 5.831597] WARNING: CPU: 7 PID: 901 at sound/soc/intel/skylake/skl-messages.c:552 skl_copy_copier_caps.constprop.0+0xb0/0xc0 [snd_soc_skl] [ 5.831623] Modules linked in: bnep snd_soc_skl_ssp_clk snd_sof_pci_intel_skl snd_sof_intel_hda_common soundwire_intel snd_soc_skl_hda_dsp snd_soc_intel_hda_dsp_common soundwire_cadence snd_sof_intel_hda_mlink snd_sof_intel_hda snd_sof_pci snd_soc_hdac_hdmi snd_sof_xtensa_dsp snd_hda_codec_realtek snd_sof snd_hda_codec_generic snd_sof_utils ledtrig_audio soundwire_generic_allocation soundwire_bus snd_soc_avs snd_soc_dmic snd_soc_hda_codec snd_soc_skl snd_soc_hdac_hda snd_hda_ext_core snd_soc_sst_ipc intel_tcc_cooling x86_pkg_temp_thermal intel_powerclamp snd_soc_sst_dsp snd_soc_acpi_intel_match binfmt_misc snd_soc_acpi coretemp snd_soc_core snd_compress kvm_intel ac97_bus snd_pcm_dmaengine snd_hda_intel kvm irqbypass snd_intel_dspcfg crct10dif_pclmul polyval_clmulni iwlmvm snd_intel_sdw_acpi polyval_generic ghash_clmulni_intel sha512_ssse3 mei_hdcp mei_pxp intel_rapl_msr nls_iso8859_1 aesni_intel snd_hda_codec crypto_simd snd_hda_core cryptd snd_hwdep rapl mac80211 i915 libarc4 snd_pcm intel_cstate uvcvideo [ 5.831710] snd_seq_midi snd_seq_midi_event videobuf2_vmalloc drm_buddy uvc videobuf2_memops btusb videobuf2_v4l2 btrtl snd_rawmidi btbcm hid_sensor_als ttm hid_sensor_accel_3d iwlwifi hid_sensor_trigger snd_seq industrialio_triggered_buffer input_leds videodev snd_seq_device btintel kfifo_buf lenovo_ymc snd_timer serio_raw joydev drm_display_helper videobuf2_common btmtk hid_sensor_iio_common intel_wmi_thunderbolt mc wmi_bmof industrialio cfg80211 hid_multitouch bluetooth snd mei_me cec rc_core processor_thermal_device_pci_legacy soundcore mei ecdh_generic 8250_dw ecc drm_kms_helper processor_thermal_device processor_thermal_rfim processor_thermal_mbox i2c_algo_bit ucsi_acpi intel_xhci_usb_role_switch syscopyarea typec_ucsi processor_thermal_rapl intel_rapl_common sysfillrect intel_soc_dts_iosf sysimgblt typec intel_pch_thermal ideapad_laptop int3403_thermal sparse_keymap platform_profile soc_button_array int340x_thermal_zone int3400_thermal acpi_thermal_rel acpi_pad mac_hid sch_fq_codel msr parport_pc ppdev lp [ 5.831816] parport ramoops drm reed_solomon pstore_blk pstore_zone efi_pstore ip_tables x_tables autofs4 hid_sensor_custom hid_sensor_hub wacom usbhid hid_generic nvme crc32_pclmul nvme_core i2c_i801 i2c_smbus nvme_common intel_lpss_pci intel_lpss xhci_pci idma64 xhci_pci_renesas i2c_hid_acpi i2c_hid hid video wmi pinctrl_sunrisepoint [ 5.831858] CPU: 7 PID: 901 Comm: pulseaudio Not tainted 6.4.3-060403-generic #202307110536 [ 5.831863] Hardware name: LENOVO 81C4/LNVNB161216, BIOS 8GCN37WW 11/23/2020 [ 5.831865] RIP: 0010:skl_copy_copier_caps.constprop.0+0xb0/0xc0 [snd_soc_skl] [ 5.831886] Code: 00 00 41 83 e7 01 75 a0 b9 04 00 00 00 48 c7 c2 b0 8d 9a c1 4c 89 ee 48 c7 c7 08 8e 9a c1 c6 05 8e 4b 02 00 01 e8 f0 9b 37 d7 <0f> 0b e9 77 ff ff ff 66 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 [ 5.831889] RSP: 0018:ffffafeec1aa7950 EFLAGS: 00010246 [ 5.831893] RAX: 0000000000000000 RBX: ffff9389a2281c28 RCX: 0000000000000000 [ 5.831896] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 [ 5.831898] RBP: ffffafeec1aa7978 R08: 0000000000000000 R09: 0000000000000000 [ 5.831901] R10: 0000000000000000 R11: 0000000000000000 R12: ffff93898f0ce000 [ 5.831903] R13: 0000000000000ba8 R14: ffff93898f0ce050 R15: 0000000000000000 [ 5.831905] FS: 00007f5a06f87080(0000) GS:ffff938d31fc0000(0000) knlGS:0000000000000000 [ 5.831909] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 5.831912] CR2: 00007f5a06e82000 CR3: 0000000100df6005 CR4: 00000000003706e0 [ 5.831914] Call Trace: [ 5.831916] [ 5.831920] ? show_regs+0x6d/0x80 [ 5.831927] ? __warn+0x89/0x160 [ 5.831933] ? skl_copy_copier_caps.constprop.0+0xb0/0xc0 [snd_soc_skl] [ 5.831952] ? report_bug+0x17e/0x1b0 [ 5.831958] ? handle_bug+0x46/0x90 [ 5.831965] ? exc_invalid_op+0x18/0x80 [ 5.831970] ? asm_exc_invalid_op+0x1b/0x20 [ 5.831977] ? skl_copy_copier_caps.constprop.0+0xb0/0xc0 [snd_soc_skl] [ 5.831996] skl_set_copier_format+0x164/0x2a0 [snd_soc_skl] [ 5.832014] skl_set_module_format.constprop.0+0x246/0x2f0 [snd_soc_skl] [ 5.832033] skl_init_module+0x72/0x1b0 [snd_soc_skl] [ 5.832052] skl_tplg_init_pipe_modules+0x2f1/0x530 [snd_soc_skl] [ 5.832072] skl_tplg_mixer_event+0xe5/0x290 [snd_soc_skl] [ 5.832091] dapm_seq_check_event+0x135/0x210 [snd_soc_core] [ 5.832136] dapm_seq_run_coalesced+0x8f/0x1f0 [snd_soc_core] [ 5.832175] dapm_seq_run+0x12a/0x3c0 [snd_soc_core] [ 5.832215] dapm_power_widgets+0x39b/0x5b0 [snd_soc_core] [ 5.832254] snd_soc_dapm_stream_event+0x168/0x1b0 [snd_soc_core] [ 5.832294] __soc_pcm_prepare+0x64/0x140 [snd_soc_core] [ 5.832336] dpcm_fe_dai_prepare+0x100/0x2b0 [snd_soc_core] [ 5.832377] snd_pcm_do_prepare+0x2c/0x50 [snd_pcm] [ 5.832400] snd_pcm_action_single+0x38/0x90 [snd_pcm] [ 5.832420] snd_pcm_action_nonatomic+0xab/0xb0 [snd_pcm] [ 5.832439] snd_pcm_prepare+0xad/0x110 [snd_pcm] [ 5.832459] snd_pcm_common_ioctl+0xa72/0xbc0 [snd_pcm] [ 5.832480] snd_pcm_ioctl+0x27/0x50 [snd_pcm] [ 5.832499] __x64_sys_ioctl+0x9d/0xe0 [ 5.832505] do_syscall_64+0x58/0x90 [ 5.832510] ? exit_to_user_mode_prepare+0x30/0xb0 [ 5.832515] ? syscall_exit_to_user_mode+0x29/0x50 [ 5.832520] ? do_syscall_64+0x67/0x90 [ 5.832524] ? syscall_exit_to_user_mode+0x29/0x50 [ 5.832529] ? do_syscall_64+0x67/0x90 [ 5.832533] ? do_syscall_64+0x67/0x90 [ 5.832537] entry_SYSCALL_64_after_hwframe+0x72/0xdc [ 5.832543] RIP: 0033:0x7f5a0791aaff [ 5.832577] Code: 00 48 89 44 24 18 31 c0 48 8d 44 24 60 c7 04 24 10 00 00 00 48 89 44 24 08 48 8d 44 24 20 48 89 44 24 10 b8 10 00 00 00 0f 05 <41> 89 c0 3d 00 f0 ff ff 77 1f 48 8b 44 24 18 64 48 2b 04 25 28 00 [ 5.832580] RSP: 002b:00007ffd68266da0 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [ 5.832585] RAX: ffffffffffffffda RBX: 00005644878f4a10 RCX: 00007f5a0791aaff [ 5.832587] RDX: 0000000000000000 RSI: 0000000000004140 RDI: 0000000000000017 [ 5.832590] RBP: 00007ffd682673e0 R08: 0000000000000000 R09: 00000000000012bd [ 5.832592] R10: 0000000000000004 R11: 0000000000000246 R12: 0000000000000000 [ 5.832594] R13: 00007ffd682670b0 R14: 00007f5a06ec6290 R15: 00007ffd68266e40 [ 5.832599] [ 5.832601] ---[ end trace 0000000000000000 ]--- [ 5.834491] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [ 5.834525] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [ 5.839488] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [ 5.852616] snd_soc_skl 0000:00:1f.3: ASoC: error at soc_dai_trigger on hdmi2: -32 [ 5.852626] HDA DSP HDMI2: ASoC: trigger FE cmd: 1 failed: -32 [ 5.853226] snd_soc_skl 0000:00:1f.3: ASoC: error at soc_dai_trigger on hdmi2: -32 [ 5.853232] HDA DSP HDMI2: ASoC: trigger FE cmd: 1 failed: -32 [ 5.858992] snd_soc_skl 0000:00:1f.3: ASoC: error at soc_dai_trigger on hdmi1: -32 [ 5.859000] HDA DSP HDMI1: ASoC: trigger FE cmd: 1 failed: -32 [ 5.860479] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [ 5.860507] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [ 5.868575] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [ 5.869506] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [ 5.870506] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [ 5.875512] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [ 5.875605] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [ 6.332269] Bluetooth: hci0: Failed to send firmware data (-38) [ 6.332301] Bluetooth: hci0: Intel reset sent to retry FW download [ 6.335412] usb 1-8: USB disconnect, device number 5 [ 6.490064] Bluetooth: hci0: sending frame failed (-19) [ 6.490081] Bluetooth: hci0: Reading supported features failed (-19) [ 6.490087] Bluetooth: hci0: Error reading debug features [ 6.490097] Bluetooth: hci0: sending frame failed (-19) [ 6.490106] Bluetooth: hci0: Failed to read MSFT supported features (-19) [ 6.806038] usb 1-8: new full-speed USB device number 6 using xhci_hcd [ 6.955255] usb 1-8: New USB device found, idVendor=8087, idProduct=0032, bcdDevice= 0.00 [ 6.955264] usb 1-8: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 6.958700] Bluetooth: hci0: Device revision is 0 [ 6.958705] Bluetooth: hci0: Secure boot is enabled [ 6.958708] Bluetooth: hci0: OTP lock is enabled [ 6.958710] Bluetooth: hci0: API lock is enabled [ 6.958712] Bluetooth: hci0: Debug lock is disabled [ 6.958714] Bluetooth: hci0: Minimum firmware build 1 week 10 2014 [ 6.958717] Bluetooth: hci0: Bootloader timestamp 2019.40 buildtype 1 build 38 [ 6.967192] Bluetooth: hci0: Found device firmware: intel/ibt-0041-0041.sfi [ 6.967319] Bluetooth: hci0: Boot Address: 0x100800 [ 6.967323] Bluetooth: hci0: Firmware Version: 132-5.22 [ 7.232152] audit: type=1400 audit(1689278163.310:65): apparmor="DENIED" operation="capable" class="cap" profile="/snap/snapd/19457/usr/lib/snapd/snap-confine" pid=746 comm="snap-confine" capability=12 capname="net_admin" [ 7.232437] audit: type=1400 audit(1689278163.310:66): apparmor="DENIED" operation="capable" class="cap" profile="/snap/snapd/19457/usr/lib/snapd/snap-confine" pid=746 comm="snap-confine" capability=38 capname="perfmon" [ 7.234499] audit: type=1400 audit(1689278163.314:67): apparmor="DENIED" operation="capable" class="cap" profile="/snap/snapd/19457/usr/lib/snapd/snap-confine" pid=902 comm="snap-confine" capability=12 capname="net_admin" [ 7.234526] audit: type=1400 audit(1689278163.314:68): apparmor="DENIED" operation="capable" class="cap" profile="/snap/snapd/19457/usr/lib/snapd/snap-confine" pid=902 comm="snap-confine" capability=38 capname="perfmon" [ 7.466415] loop27: detected capacity change from 0 to 8 [ 7.969479] rfkill: input handler disabled [ 8.249310] Bluetooth: hci0: Waiting for firmware download to complete [ 8.249670] Bluetooth: hci0: Firmware loaded in 1252412 usecs [ 8.249743] Bluetooth: hci0: Waiting for device to boot [ 8.276685] Bluetooth: hci0: Device booted in 26344 usecs [ 8.276700] Bluetooth: hci0: Malformed MSFT vendor event: 0x02 [ 8.276996] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-0041-0041.ddc [ 8.278692] Bluetooth: hci0: Applying Intel DDC parameters completed [ 8.281705] Bluetooth: hci0: Firmware timestamp 2022.5 buildtype 1 build 38020 [ 8.358779] Bluetooth: MGMT ver 1.22 [ 8.373093] NET: Registered PF_ALG protocol family [ 9.382480] wlp107s0: authenticate with d8:ec:5e:55:e0:8b [ 9.382541] wlp107s0: 80 MHz not supported, disabling VHT [ 9.390298] wlp107s0: send auth to d8:ec:5e:55:e0:8b (try 1/3) [ 9.415246] wlp107s0: authenticated [ 9.418054] wlp107s0: associate with d8:ec:5e:55:e0:8b (try 1/3) [ 9.425641] wlp107s0: RX AssocResp from d8:ec:5e:55:e0:8b (capab=0x1431 status=0 aid=3) [ 9.442392] wlp107s0: associated [ 9.550714] IPv6: ADDRCONF(NETDEV_CHANGE): wlp107s0: link becomes ready [ 11.000095] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8b [ 17.410161] Bluetooth: RFCOMM TTY layer initialized [ 17.410168] Bluetooth: RFCOMM socket layer initialized [ 17.410173] Bluetooth: RFCOMM ver 1.11 [ 18.125350] rfkill: input handler enabled [ 18.231693] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [ 18.231731] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [ 18.232706] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [ 18.232733] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [ 18.237686] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [ 18.242690] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [ 18.247694] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [ 18.296727] snd_soc_skl 0000:00:1f.3: ASoC: error at soc_dai_trigger on hdmi2: -32 [ 18.296735] HDA DSP HDMI2: ASoC: trigger FE cmd: 1 failed: -32 [ 18.405043] snd_soc_skl 0000:00:1f.3: ASoC: error at soc_dai_trigger on hdmi1: -32 [ 18.405051] HDA DSP HDMI1: ASoC: trigger FE cmd: 1 failed: -32 [ 18.407688] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [ 18.407718] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [ 18.525786] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [ 18.526717] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [ 18.526791] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [ 18.531733] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [ 18.536733] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [ 18.541725] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [ 18.546744] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [ 18.551740] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [ 18.556738] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [ 18.561750] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [ 18.566741] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [ 18.571742] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [ 18.576734] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [ 18.581701] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [ 18.586710] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [ 18.591746] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [ 18.596743] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [ 18.601754] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [ 18.606751] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [ 18.611753] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [ 18.616766] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [ 18.621726] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [ 18.626783] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [ 18.631756] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [ 18.636710] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [ 18.641802] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [ 18.642717] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [ 19.450549] rfkill: input handler disabled [ 19.579026] audit: type=1400 audit(1689278175.658:69): apparmor="DENIED" operation="capable" class="cap" profile="/snap/snapd/19457/usr/lib/snapd/snap-confine" pid=2108 comm="snap-confine" capability=12 capname="net_admin" [ 19.579033] audit: type=1400 audit(1689278175.658:70): apparmor="DENIED" operation="capable" class="cap" profile="/snap/snapd/19457/usr/lib/snapd/snap-confine" pid=2108 comm="snap-confine" capability=38 capname="perfmon" [ 20.436787] audit: type=1400 audit(1689278176.514:71): apparmor="DENIED" operation="capable" class="cap" profile="/snap/snapd/19457/usr/lib/snapd/snap-confine" pid=2260 comm="snap-confine" capability=12 capname="net_admin" [ 23.089428] audit: type=1400 audit(1689278179.166:72): apparmor="DENIED" operation="open" class="file" profile="snap.snap-store.ubuntu-software" name="/var/lib/snapd/hostfs/usr/share/discord/discord.desktop" pid=2108 comm="snap-store" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [ 23.119304] audit: type=1400 audit(1689278179.198:73): apparmor="DENIED" operation="open" class="file" profile="snap.snap-store.ubuntu-software" name="/var/lib/snapd/hostfs/usr/share/discord/discord.desktop" pid=2108 comm="snap-store" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [ 23.409529] audit: type=1326 audit(1689278179.486:74): auid=1000 uid=1000 gid=1000 ses=3 subj=snap.snap-store.ubuntu-software pid=2108 comm="snap-store" exe="/snap/snap-store/959/usr/bin/snap-store" sig=0 arch=c000003e syscall=93 compat=0 ip=0x7fd713138c4b code=0x50000 [ 23.841557] audit: type=1400 audit(1689278179.918:75): apparmor="DENIED" operation="open" class="file" profile="snap.snap-store.ubuntu-software" name="/etc/appstream.conf" pid=2108 comm="snap-store" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [ 27.036306] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [ 27.036411] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [ 27.036438] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [ 29.747006] wlp107s0: Connection to AP d8:ec:5e:55:e0:8b lost [ 31.579961] wlp107s0: authenticate with d8:ec:5e:55:e0:8c [ 31.587441] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 1/3) [ 31.620546] wlp107s0: authenticated [ 31.622047] wlp107s0: associate with d8:ec:5e:55:e0:8c (try 1/3) [ 31.627239] wlp107s0: RX AssocResp from d8:ec:5e:55:e0:8c (capab=0x1511 status=0 aid=11) [ 31.641003] wlp107s0: associated [ 31.694020] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8c [ 59.180494] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [ 59.180599] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [ 59.180628] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [ 72.553015] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [ 72.553119] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [ 72.553144] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [ 83.990498] audit: type=1400 audit(1689278242.027:76): apparmor="DENIED" operation="capable" class="cap" profile="/snap/snapd/19457/usr/lib/snapd/snap-confine" pid=3055 comm="snap-confine" capability=38 capname="perfmon" [ 84.278423] audit: type=1400 audit(1689278242.319:77): apparmor="DENIED" operation="capable" class="cap" profile="/snap/snapd/19457/usr/lib/snapd/snap-confine" pid=3088 comm="snap-confine" capability=12 capname="net_admin" [ 84.278430] audit: type=1400 audit(1689278242.319:78): apparmor="DENIED" operation="capable" class="cap" profile="/snap/snapd/19457/usr/lib/snapd/snap-confine" pid=3088 comm="snap-confine" capability=38 capname="perfmon" [ 84.354503] audit: type=1400 audit(1689278242.395:79): apparmor="DENIED" operation="capable" class="cap" profile="/snap/snapd/19457/usr/lib/snapd/snap-confine" pid=3123 comm="snap-confine" capability=12 capname="net_admin" [ 84.354509] audit: type=1400 audit(1689278242.395:80): apparmor="DENIED" operation="capable" class="cap" profile="/snap/snapd/19457/usr/lib/snapd/snap-confine" pid=3123 comm="snap-confine" capability=38 capname="perfmon" [ 100.633896] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8c for new auth to d8:ec:5e:55:e0:8b [ 100.709263] wlp107s0: authenticate with d8:ec:5e:55:e0:8b [ 100.709292] wlp107s0: 80 MHz not supported, disabling VHT [ 100.713589] wlp107s0: send auth to d8:ec:5e:55:e0:8b (try 1/3) [ 100.745234] wlp107s0: authenticated [ 100.749392] wlp107s0: associate with d8:ec:5e:55:e0:8b (try 1/3) [ 100.756790] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8b (capab=0x1431 status=0 aid=3) [ 100.770955] wlp107s0: associated [ 101.110811] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8b [ 101.992975] audit: type=1400 audit(1689278260.036:81): apparmor="DENIED" operation="capable" class="cap" profile="/snap/snapd/19457/usr/lib/snapd/snap-confine" pid=3187 comm="snap-confine" capability=12 capname="net_admin" [ 101.992981] audit: type=1400 audit(1689278260.036:82): apparmor="DENIED" operation="capable" class="cap" profile="/snap/snapd/19457/usr/lib/snapd/snap-confine" pid=3187 comm="snap-confine" capability=38 capname="perfmon" [ 122.353614] warning: `ThreadPoolForeg' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211 [ 192.730956] wlp107s0: authenticate with d8:ec:5e:55:e0:8c [ 192.738729] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 1/3) [ 192.771704] wlp107s0: authenticated [ 192.773151] wlp107s0: associate with d8:ec:5e:55:e0:8c (try 1/3) [ 192.777950] wlp107s0: RX AssocResp from d8:ec:5e:55:e0:8c (capab=0x1511 status=0 aid=11) [ 192.790305] wlp107s0: associated [ 192.855793] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8c [ 193.008896] audit: type=1400 audit(1689278351.028:83): apparmor="DENIED" operation="capable" class="cap" profile="/snap/snapd/19457/usr/lib/snapd/snap-confine" pid=4151 comm="snap-confine" capability=12 capname="net_admin" [ 193.008909] audit: type=1400 audit(1689278351.028:84): apparmor="DENIED" operation="capable" class="cap" profile="/snap/snapd/19457/usr/lib/snapd/snap-confine" pid=4151 comm="snap-confine" capability=38 capname="perfmon" [ 233.996341] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8c for new auth to d8:ec:5e:55:e0:8b [ 234.052537] wlp107s0: authenticate with d8:ec:5e:55:e0:8b [ 234.052587] wlp107s0: 80 MHz not supported, disabling VHT [ 234.073288] wlp107s0: send auth to d8:ec:5e:55:e0:8b (try 1/3) [ 234.107751] wlp107s0: authenticated [ 234.111389] wlp107s0: associate with d8:ec:5e:55:e0:8b (try 1/3) [ 234.119211] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8b (capab=0x1431 status=0 aid=3) [ 234.139861] wlp107s0: associated [ 234.139991] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8b [ 339.104245] audit: type=1326 audit(1689278497.121:85): auid=1000 uid=1000 gid=1000 ses=3 subj=snap.slack.slack pid=4612 comm="slack" exe="/snap/slack/82/usr/lib/slack/slack" sig=0 arch=c000003e syscall=330 compat=0 ip=0x7f2190dfc4e7 code=0x50000 [ 339.439788] audit: type=1326 audit(1689278497.453:86): auid=1000 uid=1000 gid=1000 ses=3 subj=snap.slack.slack pid=4612 comm="slack" exe="/snap/slack/82/usr/lib/slack/slack" sig=0 arch=c000003e syscall=92 compat=0 ip=0x7f2190deb3b7 code=0x50000 [ 339.564075] audit: type=1400 audit(1689278497.581:87): apparmor="DENIED" operation="open" class="file" profile="snap.slack.slack" name="/etc/" pid=4612 comm="slack" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [ 339.568508] audit: type=1326 audit(1689278497.585:88): auid=1000 uid=1000 gid=1000 ses=3 subj=snap.slack.slack pid=4612 comm="slack" exe="/snap/slack/82/usr/lib/slack/slack" sig=0 arch=c000003e syscall=92 compat=0 ip=0x7f2190deb3b7 code=0x50000 [ 339.888727] audit: type=1326 audit(1689278497.905:89): auid=1000 uid=1000 gid=1000 ses=3 subj=snap.slack.slack pid=4612 comm=64636F6E6620776F726B6572 exe="/snap/slack/82/usr/lib/slack/slack" sig=0 arch=c000003e syscall=314 compat=0 ip=0x7f2190df5539 code=0x50000 [ 339.919611] audit: type=1400 audit(1689278497.933:90): apparmor="DENIED" operation="open" class="file" profile="snap.slack.slack" name="/etc/vulkan/implicit_layer.d/" pid=4647 comm="slack" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [ 339.919866] audit: type=1400 audit(1689278497.933:91): apparmor="DENIED" operation="open" class="file" profile="snap.slack.slack" name="/etc/vulkan/implicit_layer.d/" pid=4647 comm="slack" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [ 339.919911] audit: type=1400 audit(1689278497.933:92): apparmor="DENIED" operation="open" class="file" profile="snap.slack.slack" name="/etc/vulkan/explicit_layer.d/" pid=4647 comm="slack" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [ 339.919972] audit: type=1400 audit(1689278497.937:93): apparmor="DENIED" operation="open" class="file" profile="snap.slack.slack" name="/etc/vulkan/icd.d/" pid=4647 comm="slack" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [ 340.198148] audit: type=1326 audit(1689278498.213:94): auid=1000 uid=1000 gid=1000 ses=3 subj=snap.slack.slack pid=4647 comm="slack" exe="/snap/slack/82/usr/lib/slack/slack" sig=0 arch=c000003e syscall=203 compat=0 ip=0x7f6df59d9c7f code=0x50000 [ 348.951122] kauditd_printk_skb: 94 callbacks suppressed [ 348.951126] audit: type=1326 audit(1689278506.965:189): auid=1000 uid=1000 gid=1000 ses=3 subj=snap.slack.slack pid=4612 comm="slack" exe="/snap/slack/82/usr/lib/slack/slack" sig=0 arch=c000003e syscall=92 compat=0 ip=0x7f2190deb3b7 code=0x50000 [ 399.535522] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8b for new auth to d8:ec:5e:55:e0:8c [ 399.598013] wlp107s0: authenticate with d8:ec:5e:55:e0:8c [ 399.604977] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 1/3) [ 399.638053] wlp107s0: authenticated [ 399.638352] wlp107s0: associate with d8:ec:5e:55:e0:8c (try 1/3) [ 399.644535] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8c (capab=0x1511 status=0 aid=11) [ 399.656816] wlp107s0: associated [ 399.705189] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8c [ 407.655138] audit: type=1326 audit(1689278565.667:190): auid=1000 uid=1000 gid=1000 ses=3 subj=snap.slack.slack pid=4612 comm="slack" exe="/snap/slack/82/usr/lib/slack/slack" sig=0 arch=c000003e syscall=92 compat=0 ip=0x7f2190deb3b7 code=0x50000 [ 508.421788] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8c for new auth to d8:ec:5e:55:e0:8b [ 508.505631] wlp107s0: authenticate with d8:ec:5e:55:e0:8b [ 508.505656] wlp107s0: 80 MHz not supported, disabling VHT [ 508.510057] wlp107s0: send auth to d8:ec:5e:55:e0:8b (try 1/3) [ 508.541590] wlp107s0: authenticated [ 508.545193] wlp107s0: associate with d8:ec:5e:55:e0:8b (try 1/3) [ 508.552803] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8b (capab=0x1431 status=0 aid=3) [ 508.575204] wlp107s0: associated [ 508.575259] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8b [ 526.713277] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8b for new auth to d8:ec:5e:55:e0:8c [ 526.784866] wlp107s0: authenticate with d8:ec:5e:55:e0:8c [ 526.791231] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 1/3) [ 526.823780] iwlwifi 0000:6b:00.0: Unhandled alg: 0x3f0707 [ 526.924641] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 2/3) [ 526.926666] wlp107s0: authenticated [ 526.932595] wlp107s0: associate with d8:ec:5e:55:e0:8c (try 1/3) [ 526.936918] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8c (capab=0x1511 status=0 aid=11) [ 526.944370] wlp107s0: associated [ 526.989390] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8c [ 559.371327] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8c for new auth to d8:ec:5e:55:e0:8b [ 559.435473] wlp107s0: authenticate with d8:ec:5e:55:e0:8b [ 559.435488] wlp107s0: 80 MHz not supported, disabling VHT [ 559.440745] wlp107s0: send auth to d8:ec:5e:55:e0:8b (try 1/3) [ 559.471968] wlp107s0: authenticated [ 559.478590] wlp107s0: associate with d8:ec:5e:55:e0:8b (try 1/3) [ 559.486582] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8b (capab=0x1431 status=0 aid=3) [ 559.501742] wlp107s0: associated [ 559.568668] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8b [ 1013.243676] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [ 1013.243786] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [ 1013.243819] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [ 1862.126566] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8b for new auth to d8:ec:5e:55:e0:8c [ 1862.207152] wlp107s0: authenticate with d8:ec:5e:55:e0:8c [ 1862.213233] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 1/3) [ 1862.245554] wlp107s0: authenticated [ 1862.249094] wlp107s0: associate with d8:ec:5e:55:e0:8c (try 1/3) [ 1862.253165] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8c (capab=0x1511 status=0 aid=4) [ 1862.265235] wlp107s0: associated [ 1862.299826] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8c [ 1956.597800] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [ 1956.597900] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [ 1956.597935] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [ 1960.617372] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8c for new auth to d8:ec:5e:55:e0:8b [ 1960.680043] wlp107s0: authenticate with d8:ec:5e:55:e0:8b [ 1960.680059] wlp107s0: 80 MHz not supported, disabling VHT [ 1960.684141] wlp107s0: send auth to d8:ec:5e:55:e0:8b (try 1/3) [ 1960.715321] wlp107s0: authenticated [ 1960.716238] wlp107s0: associate with d8:ec:5e:55:e0:8b (try 1/3) [ 1960.723623] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8b (capab=0x1431 status=0 aid=3) [ 1960.737474] wlp107s0: associated [ 1960.813070] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8b [ 1968.413497] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8b for new auth to d8:ec:5e:55:e0:8c [ 1968.476693] wlp107s0: authenticate with d8:ec:5e:55:e0:8c [ 1968.483432] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 1/3) [ 1968.515754] iwlwifi 0000:6b:00.0: Unhandled alg: 0x3f0707 [ 1968.616536] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 2/3) [ 1968.618353] wlp107s0: authenticated [ 1968.620527] wlp107s0: associate with d8:ec:5e:55:e0:8c (try 1/3) [ 1968.624882] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8c (capab=0x1511 status=0 aid=4) [ 1968.632601] wlp107s0: associated [ 1968.691996] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8c [ 2067.935190] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8c for new auth to d8:ec:5e:55:e0:8b [ 2068.002368] wlp107s0: authenticate with d8:ec:5e:55:e0:8b [ 2068.002385] wlp107s0: 80 MHz not supported, disabling VHT [ 2068.006803] wlp107s0: send auth to d8:ec:5e:55:e0:8b (try 1/3) [ 2068.038715] wlp107s0: authenticated [ 2068.042573] wlp107s0: associate with d8:ec:5e:55:e0:8b (try 1/3) [ 2068.053224] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8b (capab=0x1431 status=0 aid=3) [ 2068.107898] wlp107s0: associated [ 2068.129328] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8b [ 2076.563055] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8b for new auth to d8:ec:5e:55:e0:8c [ 2076.645782] wlp107s0: authenticate with d8:ec:5e:55:e0:8c [ 2076.652924] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 1/3) [ 2076.685343] iwlwifi 0000:6b:00.0: Unhandled alg: 0x3f0707 [ 2076.786135] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 2/3) [ 2076.788651] wlp107s0: authenticated [ 2076.790137] wlp107s0: associate with d8:ec:5e:55:e0:8c (try 1/3) [ 2076.795262] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8c (capab=0x1511 status=0 aid=4) [ 2076.802643] wlp107s0: associated [ 2076.826984] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8c [ 2112.173485] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8c for new auth to d8:ec:5e:55:e0:8b [ 2112.233140] wlp107s0: authenticate with d8:ec:5e:55:e0:8b [ 2112.233155] wlp107s0: 80 MHz not supported, disabling VHT [ 2112.238808] wlp107s0: send auth to d8:ec:5e:55:e0:8b (try 1/3) [ 2112.270103] wlp107s0: authenticated [ 2112.272600] wlp107s0: associate with d8:ec:5e:55:e0:8b (try 1/3) [ 2112.280533] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8b (capab=0x1431 status=0 aid=3) [ 2112.294642] wlp107s0: associated [ 2112.366915] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8b [ 2458.121617] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8b for new auth to d8:ec:5e:55:e0:8c [ 2458.195994] wlp107s0: authenticate with d8:ec:5e:55:e0:8c [ 2458.202714] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 1/3) [ 2458.236393] wlp107s0: authenticated [ 2458.244972] wlp107s0: associate with d8:ec:5e:55:e0:8c (try 1/3) [ 2458.249697] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8c (capab=0x1511 status=0 aid=4) [ 2458.268450] wlp107s0: associated [ 2458.270293] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8c [ 2493.564793] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8c for new auth to d8:ec:5e:55:e0:8b [ 2493.640046] wlp107s0: authenticate with d8:ec:5e:55:e0:8b [ 2493.640071] wlp107s0: 80 MHz not supported, disabling VHT [ 2493.644528] wlp107s0: send auth to d8:ec:5e:55:e0:8b (try 1/3) [ 2493.676021] wlp107s0: authenticated [ 2493.684171] wlp107s0: associate with d8:ec:5e:55:e0:8b (try 1/3) [ 2493.691997] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8b (capab=0x1431 status=0 aid=3) [ 2493.716842] wlp107s0: associated [ 2493.716881] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8b [ 2498.452732] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8b for new auth to d8:ec:5e:55:e0:8c [ 2498.511902] wlp107s0: authenticate with d8:ec:5e:55:e0:8c [ 2498.518548] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 1/3) [ 2498.551061] iwlwifi 0000:6b:00.0: Unhandled alg: 0x3f0707 [ 2498.652219] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 2/3) [ 2498.654087] wlp107s0: authenticated [ 2498.656196] wlp107s0: associate with d8:ec:5e:55:e0:8c (try 1/3) [ 2498.660646] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8c (capab=0x1511 status=0 aid=4) [ 2498.667991] wlp107s0: associated [ 2498.719123] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8c [ 2531.228992] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8c for new auth to d8:ec:5e:55:e0:8b [ 2531.296377] wlp107s0: authenticate with d8:ec:5e:55:e0:8b [ 2531.296392] wlp107s0: 80 MHz not supported, disabling VHT [ 2531.301194] wlp107s0: send auth to d8:ec:5e:55:e0:8b (try 1/3) [ 2531.331904] wlp107s0: authenticated [ 2531.335987] wlp107s0: associate with d8:ec:5e:55:e0:8b (try 1/3) [ 2531.343710] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8b (capab=0x1431 status=0 aid=3) [ 2531.358187] wlp107s0: associated [ 2531.390647] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8b [ 2536.969175] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8b for new auth to d8:ec:5e:55:e0:8c [ 2537.035819] wlp107s0: authenticate with d8:ec:5e:55:e0:8c [ 2537.041400] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 1/3) [ 2537.073578] iwlwifi 0000:6b:00.0: Unhandled alg: 0x3f0707 [ 2537.176017] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 2/3) [ 2537.177877] wlp107s0: authenticated [ 2537.184021] wlp107s0: associate with d8:ec:5e:55:e0:8c (try 1/3) [ 2537.187996] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8c (capab=0x1511 status=0 aid=4) [ 2537.195667] wlp107s0: associated [ 2537.221370] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8c [ 2569.741100] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8c for new auth to d8:ec:5e:55:e0:8b [ 2569.811504] wlp107s0: authenticate with d8:ec:5e:55:e0:8b [ 2569.811519] wlp107s0: 80 MHz not supported, disabling VHT [ 2569.815869] wlp107s0: send auth to d8:ec:5e:55:e0:8b (try 1/3) [ 2569.847415] wlp107s0: authenticated [ 2569.851975] wlp107s0: associate with d8:ec:5e:55:e0:8b (try 1/3) [ 2569.862740] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8b (capab=0x1431 status=0 aid=3) [ 2569.877225] wlp107s0: associated [ 2569.893804] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8b [ 2595.921111] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8b for new auth to d8:ec:5e:55:e0:8c [ 2595.987522] wlp107s0: authenticate with d8:ec:5e:55:e0:8c [ 2595.993592] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 1/3) [ 2596.026523] iwlwifi 0000:6b:00.0: Unhandled alg: 0x3f0707 [ 2596.131977] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 2/3) [ 2596.134133] wlp107s0: authenticated [ 2596.139929] wlp107s0: associate with d8:ec:5e:55:e0:8c (try 1/3) [ 2596.144514] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8c (capab=0x1511 status=0 aid=4) [ 2596.152289] wlp107s0: associated [ 2596.204508] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8c [ 2607.445388] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8c for new auth to d8:ec:5e:55:e0:8b [ 2607.512717] wlp107s0: authenticate with d8:ec:5e:55:e0:8b [ 2607.512768] wlp107s0: 80 MHz not supported, disabling VHT [ 2607.518580] wlp107s0: send auth to d8:ec:5e:55:e0:8b (try 1/3) [ 2607.550223] iwlwifi 0000:6b:00.0: Unhandled alg: 0x3f0707 [ 2607.652298] wlp107s0: send auth to d8:ec:5e:55:e0:8b (try 2/3) [ 2607.655749] wlp107s0: authenticated [ 2607.659954] wlp107s0: associate with d8:ec:5e:55:e0:8b (try 1/3) [ 2607.668203] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8b (capab=0x1431 status=0 aid=3) [ 2607.689848] wlp107s0: associated [ 2607.689982] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8b [ 2635.813861] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [ 2635.813910] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [ 2635.814899] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [ 2643.040681] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8b for new auth to d8:ec:5e:55:e0:8c [ 2643.099795] wlp107s0: authenticate with d8:ec:5e:55:e0:8c [ 2643.106245] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 1/3) [ 2643.138894] wlp107s0: authenticated [ 2643.140042] wlp107s0: associate with d8:ec:5e:55:e0:8c (try 1/3) [ 2643.145332] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8c (capab=0x1511 status=0 aid=4) [ 2643.158017] wlp107s0: associated [ 2643.309097] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8c [ 2675.585035] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8c for new auth to d8:ec:5e:55:e0:8b [ 2675.640816] wlp107s0: authenticate with d8:ec:5e:55:e0:8b [ 2675.640849] wlp107s0: 80 MHz not supported, disabling VHT [ 2675.645695] wlp107s0: send auth to d8:ec:5e:55:e0:8b (try 1/3) [ 2675.676948] wlp107s0: authenticated [ 2675.680082] wlp107s0: associate with d8:ec:5e:55:e0:8b (try 1/3) [ 2675.687477] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8b (capab=0x1431 status=0 aid=3) [ 2675.702473] wlp107s0: associated [ 2675.776136] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8b [ 2681.129485] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8b for new auth to d8:ec:5e:55:e0:8c [ 2681.204051] wlp107s0: authenticate with d8:ec:5e:55:e0:8c [ 2681.210208] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 1/3) [ 2681.242272] iwlwifi 0000:6b:00.0: Unhandled alg: 0x3f0707 [ 2681.348104] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 2/3) [ 2681.349900] wlp107s0: authenticated [ 2681.352123] wlp107s0: associate with d8:ec:5e:55:e0:8c (try 1/3) [ 2681.356421] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8c (capab=0x1511 status=0 aid=3) [ 2681.364216] wlp107s0: associated [ 2681.402126] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8c [ 2682.221377] audit: type=1326 audit(1689280840.225:191): auid=1000 uid=1000 gid=1000 ses=3 subj=snap.slack.slack pid=4612 comm="slack" exe="/snap/slack/82/usr/lib/slack/slack" sig=0 arch=c000003e syscall=92 compat=0 ip=0x7f2190deb3b7 code=0x50000 [ 2746.297683] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8c for new auth to d8:ec:5e:55:e0:8b [ 2746.365440] wlp107s0: authenticate with d8:ec:5e:55:e0:8b [ 2746.365462] wlp107s0: 80 MHz not supported, disabling VHT [ 2746.370830] wlp107s0: send auth to d8:ec:5e:55:e0:8b (try 1/3) [ 2746.404350] wlp107s0: authenticated [ 2746.408488] wlp107s0: associate with d8:ec:5e:55:e0:8b (try 1/3) [ 2746.416320] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8b (capab=0x1431 status=0 aid=3) [ 2746.438648] wlp107s0: associated [ 2746.438750] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8b [ 2797.663639] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8b for new auth to d8:ec:5e:55:e0:8c [ 2797.733304] wlp107s0: authenticate with d8:ec:5e:55:e0:8c [ 2797.752449] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 1/3) [ 2797.786234] wlp107s0: authenticated [ 2797.792822] wlp107s0: associate with d8:ec:5e:55:e0:8c (try 1/3) [ 2797.796730] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8c (capab=0x1511 status=0 aid=3) [ 2797.809299] wlp107s0: associated [ 2797.832275] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8c [ 3028.664769] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8c for new auth to d8:ec:5e:55:e0:8b [ 3028.728839] wlp107s0: authenticate with d8:ec:5e:55:e0:8b [ 3028.728855] wlp107s0: 80 MHz not supported, disabling VHT [ 3028.736904] wlp107s0: send auth to d8:ec:5e:55:e0:8b (try 1/3) [ 3028.769890] wlp107s0: authenticated [ 3028.771698] wlp107s0: associate with d8:ec:5e:55:e0:8b (try 1/3) [ 3028.779886] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8b (capab=0x1431 status=0 aid=6) [ 3028.799489] wlp107s0: associated [ 3028.958422] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8b [ 3036.264402] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8b for new auth to d8:ec:5e:55:e0:8c [ 3036.335686] wlp107s0: authenticate with d8:ec:5e:55:e0:8c [ 3036.340395] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 1/3) [ 3036.372917] iwlwifi 0000:6b:00.0: Unhandled alg: 0x3f0707 [ 3036.475894] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 2/3) [ 3036.477813] wlp107s0: authenticated [ 3036.483784] wlp107s0: associate with d8:ec:5e:55:e0:8c (try 1/3) [ 3036.488074] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8c (capab=0x1511 status=0 aid=3) [ 3036.495769] wlp107s0: associated [ 3036.532276] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8c [ 3069.444840] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8c for new auth to d8:ec:5e:55:e0:8b [ 3069.516654] wlp107s0: authenticate with d8:ec:5e:55:e0:8b [ 3069.516668] wlp107s0: 80 MHz not supported, disabling VHT [ 3069.521572] wlp107s0: send auth to d8:ec:5e:55:e0:8b (try 1/3) [ 3069.552596] wlp107s0: authenticated [ 3069.560307] wlp107s0: associate with d8:ec:5e:55:e0:8b (try 1/3) [ 3069.567600] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8b (capab=0x1431 status=0 aid=6) [ 3069.581418] wlp107s0: associated [ 3069.610286] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8b [ 3077.201593] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8b for new auth to d8:ec:5e:55:e0:8c [ 3077.268402] wlp107s0: authenticate with d8:ec:5e:55:e0:8c [ 3077.278217] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 1/3) [ 3077.311730] iwlwifi 0000:6b:00.0: Unhandled alg: 0x3f0707 [ 3077.412495] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 2/3) [ 3077.414492] wlp107s0: authenticated [ 3077.416659] wlp107s0: associate with d8:ec:5e:55:e0:8c (try 1/3) [ 3077.420999] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8c (capab=0x1511 status=0 aid=3) [ 3077.429053] wlp107s0: associated [ 3077.489365] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8c [ 3086.033981] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8c for new auth to d8:ec:5e:55:e0:8b [ 3086.100039] wlp107s0: authenticate with d8:ec:5e:55:e0:8b [ 3086.100063] wlp107s0: 80 MHz not supported, disabling VHT [ 3086.105251] wlp107s0: send auth to d8:ec:5e:55:e0:8b (try 1/3) [ 3086.135976] iwlwifi 0000:6b:00.0: Unhandled alg: 0x3f0707 [ 3086.236968] wlp107s0: send auth to d8:ec:5e:55:e0:8b (try 2/3) [ 3086.240039] wlp107s0: authenticated [ 3086.244977] wlp107s0: associate with d8:ec:5e:55:e0:8b (try 1/3) [ 3086.252957] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8b (capab=0x1431 status=0 aid=6) [ 3086.261470] wlp107s0: associated [ 3086.301796] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8b [ 3138.218444] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8b for new auth to d8:ec:5e:55:e0:8c [ 3138.277734] wlp107s0: authenticate with d8:ec:5e:55:e0:8c [ 3138.285922] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 1/3) [ 3138.319283] wlp107s0: authenticated [ 3138.321463] wlp107s0: associate with d8:ec:5e:55:e0:8c (try 1/3) [ 3138.326015] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8c (capab=0x1511 status=0 aid=3) [ 3138.339125] wlp107s0: associated [ 3138.417987] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8c [ 3204.396872] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8c for new auth to d8:ec:5e:55:e0:8b [ 3204.454626] wlp107s0: authenticate with d8:ec:5e:55:e0:8b [ 3204.454658] wlp107s0: 80 MHz not supported, disabling VHT [ 3204.459077] wlp107s0: send auth to d8:ec:5e:55:e0:8b (try 1/3) [ 3204.491426] wlp107s0: authenticated [ 3204.494739] wlp107s0: associate with d8:ec:5e:55:e0:8b (try 1/3) [ 3204.502435] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8b (capab=0x1431 status=0 aid=6) [ 3204.523458] wlp107s0: associated [ 3204.677307] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8b [ 3214.047946] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8b for new auth to d8:ec:5e:55:e0:8c [ 3214.106102] wlp107s0: authenticate with d8:ec:5e:55:e0:8c [ 3214.116143] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 1/3) [ 3214.149690] iwlwifi 0000:6b:00.0: Unhandled alg: 0x3f0707 [ 3214.254927] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 2/3) [ 3214.256817] wlp107s0: authenticated [ 3214.262881] wlp107s0: associate with d8:ec:5e:55:e0:8c (try 1/3) [ 3214.267277] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8c (capab=0x1511 status=0 aid=3) [ 3214.275344] wlp107s0: associated [ 3214.297348] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8c [ 3284.897116] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8c for new auth to d8:ec:5e:55:e0:8b [ 3284.952127] wlp107s0: authenticate with d8:ec:5e:55:e0:8b [ 3284.952147] wlp107s0: 80 MHz not supported, disabling VHT [ 3284.956580] wlp107s0: send auth to d8:ec:5e:55:e0:8b (try 1/3) [ 3284.989903] wlp107s0: authenticated [ 3284.992233] wlp107s0: associate with d8:ec:5e:55:e0:8b (try 1/3) [ 3284.999616] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8b (capab=0x1431 status=0 aid=6) [ 3285.012375] wlp107s0: associated [ 3285.168758] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8b [ 3305.141538] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8b for new auth to d8:ec:5e:55:e0:8c [ 3305.206754] wlp107s0: authenticate with d8:ec:5e:55:e0:8c [ 3305.215309] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 1/3) [ 3305.247895] iwlwifi 0000:6b:00.0: Unhandled alg: 0x3f0707 [ 3305.352739] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 2/3) [ 3305.354651] wlp107s0: authenticated [ 3305.360691] wlp107s0: associate with d8:ec:5e:55:e0:8c (try 1/3) [ 3305.364905] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8c (capab=0x1511 status=0 aid=3) [ 3305.372795] wlp107s0: associated [ 3305.434002] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8c [ 3373.776196] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8c for new auth to d8:ec:5e:55:e0:8b [ 3373.843459] wlp107s0: authenticate with d8:ec:5e:55:e0:8b [ 3373.843476] wlp107s0: 80 MHz not supported, disabling VHT [ 3373.856572] wlp107s0: send auth to d8:ec:5e:55:e0:8b (try 1/3) [ 3373.889140] wlp107s0: authenticated [ 3373.892817] wlp107s0: associate with d8:ec:5e:55:e0:8b (try 1/3) [ 3373.900328] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8b (capab=0x1431 status=0 aid=6) [ 3373.914609] wlp107s0: associated [ 3373.946457] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8b [ 3395.281171] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [ 3395.281269] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [ 3395.281310] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [ 3416.299387] audit: type=1326 audit(1689281574.290:192): auid=1000 uid=1000 gid=1000 ses=3 subj=snap.slack.slack pid=4612 comm="slack" exe="/snap/slack/82/usr/lib/slack/slack" sig=0 arch=c000003e syscall=92 compat=0 ip=0x7f2190deb3b7 code=0x50000 [ 3454.052716] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8b for new auth to d8:ec:5e:55:e0:8c [ 3454.099725] wlp107s0: authenticate with d8:ec:5e:55:e0:8c [ 3454.106636] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 1/3) [ 3454.139390] wlp107s0: authenticated [ 3454.139743] wlp107s0: associate with d8:ec:5e:55:e0:8c (try 1/3) [ 3454.146266] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8c (capab=0x1511 status=0 aid=3) [ 3454.159190] wlp107s0: associated [ 3454.325252] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8c [ 3522.515088] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8c for new auth to d8:ec:5e:55:e0:8b [ 3522.589817] wlp107s0: authenticate with d8:ec:5e:55:e0:8b [ 3522.589833] wlp107s0: 80 MHz not supported, disabling VHT [ 3522.606150] wlp107s0: send auth to d8:ec:5e:55:e0:8b (try 1/3) [ 3522.637661] wlp107s0: authenticated [ 3522.641556] wlp107s0: associate with d8:ec:5e:55:e0:8b (try 1/3) [ 3522.649631] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8b (capab=0x1431 status=0 aid=6) [ 3522.665180] wlp107s0: associated [ 3522.735000] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8b [ 3529.430298] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8b for new auth to d8:ec:5e:55:e0:8c [ 3529.502250] wlp107s0: authenticate with d8:ec:5e:55:e0:8c [ 3529.511874] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 1/3) [ 3529.544373] iwlwifi 0000:6b:00.0: Unhandled alg: 0x3f0707 [ 3529.645545] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 2/3) [ 3529.647630] wlp107s0: authenticated [ 3529.649540] wlp107s0: associate with d8:ec:5e:55:e0:8c (try 1/3) [ 3529.657229] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8c (capab=0x1511 status=0 aid=3) [ 3529.665438] wlp107s0: associated [ 3529.692041] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8c [ 3562.798731] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8c for new auth to d8:ec:5e:55:e0:8b [ 3562.871117] wlp107s0: authenticate with d8:ec:5e:55:e0:8b [ 3562.871131] wlp107s0: 80 MHz not supported, disabling VHT [ 3562.875638] wlp107s0: send auth to d8:ec:5e:55:e0:8b (try 1/3) [ 3562.907066] wlp107s0: authenticated [ 3562.914236] wlp107s0: associate with d8:ec:5e:55:e0:8b (try 1/3) [ 3562.921648] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8b (capab=0x1431 status=0 aid=6) [ 3562.937626] wlp107s0: associated [ 3563.081418] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8b [ 3658.597386] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8b for new auth to d8:ec:5e:55:e0:8c [ 3658.653490] wlp107s0: authenticate with d8:ec:5e:55:e0:8c [ 3658.663081] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 1/3) [ 3658.696312] wlp107s0: authenticated [ 3658.700428] wlp107s0: associate with d8:ec:5e:55:e0:8c (try 1/3) [ 3658.704490] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8c (capab=0x1511 status=0 aid=3) [ 3658.717438] wlp107s0: associated [ 3658.717811] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8c [ 3692.014315] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8c for new auth to d8:ec:5e:55:e0:8b [ 3692.079992] wlp107s0: authenticate with d8:ec:5e:55:e0:8b [ 3692.080039] wlp107s0: 80 MHz not supported, disabling VHT [ 3692.088296] wlp107s0: send auth to d8:ec:5e:55:e0:8b (try 1/3) [ 3692.120877] wlp107s0: authenticated [ 3692.125272] wlp107s0: associate with d8:ec:5e:55:e0:8b (try 1/3) [ 3692.138222] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8b (capab=0x1431 status=0 aid=6) [ 3692.153658] wlp107s0: associated [ 3692.208966] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8b [ 3717.410806] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8b for new auth to d8:ec:5e:55:e0:8c [ 3717.473905] wlp107s0: authenticate with d8:ec:5e:55:e0:8c [ 3717.480938] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 1/3) [ 3717.513782] iwlwifi 0000:6b:00.0: Unhandled alg: 0x3f0707 [ 3717.613869] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 2/3) [ 3717.615835] wlp107s0: authenticated [ 3717.621876] wlp107s0: associate with d8:ec:5e:55:e0:8c (try 1/3) [ 3717.625915] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8c (capab=0x1511 status=0 aid=3) [ 3717.633960] wlp107s0: associated [ 3717.700916] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8c [ 3816.973500] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8c for new auth to d8:ec:5e:55:e0:8b [ 3817.035018] wlp107s0: authenticate with d8:ec:5e:55:e0:8b [ 3817.035035] wlp107s0: 80 MHz not supported, disabling VHT [ 3817.040040] wlp107s0: send auth to d8:ec:5e:55:e0:8b (try 1/3) [ 3817.074479] wlp107s0: authenticated [ 3817.076323] wlp107s0: associate with d8:ec:5e:55:e0:8b (try 1/3) [ 3817.083739] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8b (capab=0x1431 status=0 aid=6) [ 3817.100870] wlp107s0: associated [ 3817.145288] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8b [ 3836.618182] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8b for new auth to d8:ec:5e:55:e0:8c [ 3836.664802] wlp107s0: authenticate with d8:ec:5e:55:e0:8c [ 3836.671218] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 1/3) [ 3836.704219] iwlwifi 0000:6b:00.0: Unhandled alg: 0x3f0707 [ 3836.804740] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 2/3) [ 3836.806835] wlp107s0: authenticated [ 3836.808748] wlp107s0: associate with d8:ec:5e:55:e0:8c (try 1/3) [ 3836.813843] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8c (capab=0x1511 status=0 aid=3) [ 3836.822019] wlp107s0: associated [ 3836.895700] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8c [ 3940.157330] audit: type=1326 audit(1689282098.134:193): auid=1000 uid=1000 gid=1000 ses=3 subj=snap.slack.slack pid=4612 comm="slack" exe="/snap/slack/82/usr/lib/slack/slack" sig=0 arch=c000003e syscall=92 compat=0 ip=0x7f2190deb3b7 code=0x50000 [ 4037.334917] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8c for new auth to d8:ec:5e:55:e0:8b [ 4037.412450] wlp107s0: authenticate with d8:ec:5e:55:e0:8b [ 4037.412468] wlp107s0: 80 MHz not supported, disabling VHT [ 4037.424053] wlp107s0: send auth to d8:ec:5e:55:e0:8b (try 1/3) [ 4037.458026] wlp107s0: authenticated [ 4037.462129] wlp107s0: associate with d8:ec:5e:55:e0:8b (try 1/3) [ 4037.469947] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8b (capab=0x1431 status=0 aid=4) [ 4037.487457] wlp107s0: associated [ 4037.506075] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8b [ 4117.195784] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8b for new auth to d8:ec:5e:55:e0:8c [ 4117.245963] wlp107s0: authenticate with d8:ec:5e:55:e0:8c [ 4117.258236] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 1/3) [ 4117.292006] wlp107s0: authenticated [ 4117.293712] wlp107s0: associate with d8:ec:5e:55:e0:8c (try 1/3) [ 4117.298698] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8c (capab=0x1511 status=0 aid=3) [ 4117.315327] wlp107s0: associated [ 4117.475818] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8c [ 4150.567909] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8c for new auth to d8:ec:5e:55:e0:8b [ 4150.666036] wlp107s0: authenticate with d8:ec:5e:55:e0:8b [ 4150.666057] wlp107s0: 80 MHz not supported, disabling VHT [ 4150.679008] wlp107s0: send auth to d8:ec:5e:55:e0:8b (try 1/3) [ 4150.710555] wlp107s0: authenticated [ 4150.714832] wlp107s0: associate with d8:ec:5e:55:e0:8b (try 1/3) [ 4150.722773] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8b (capab=0x1431 status=0 aid=4) [ 4150.742309] wlp107s0: associated [ 4150.763268] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8b [ 4158.359556] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8b for new auth to d8:ec:5e:55:e0:8c [ 4158.406406] wlp107s0: authenticate with d8:ec:5e:55:e0:8c [ 4158.425000] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 1/3) [ 4158.458553] iwlwifi 0000:6b:00.0: Unhandled alg: 0x3f0707 [ 4158.562098] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 2/3) [ 4158.564513] wlp107s0: authenticated [ 4158.566107] wlp107s0: associate with d8:ec:5e:55:e0:8c (try 1/3) [ 4158.570779] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8c (capab=0x1511 status=0 aid=3) [ 4158.578298] wlp107s0: associated [ 4158.640036] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8c [ 4191.932770] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8c for new auth to d8:ec:5e:55:e0:8b [ 4192.008498] wlp107s0: authenticate with d8:ec:5e:55:e0:8b [ 4192.008517] wlp107s0: 80 MHz not supported, disabling VHT [ 4192.019828] wlp107s0: send auth to d8:ec:5e:55:e0:8b (try 1/3) [ 4192.053019] wlp107s0: authenticated [ 4192.055444] wlp107s0: associate with d8:ec:5e:55:e0:8b (try 1/3) [ 4192.063062] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8b (capab=0x1431 status=0 aid=4) [ 4192.081534] wlp107s0: associated [ 4192.234855] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8b [ 4198.699485] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8b for new auth to d8:ec:5e:55:e0:8c [ 4198.783513] wlp107s0: authenticate with d8:ec:5e:55:e0:8c [ 4198.803326] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 1/3) [ 4198.836075] iwlwifi 0000:6b:00.0: Unhandled alg: 0x3f0707 [ 4198.938853] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 2/3) [ 4198.940806] wlp107s0: authenticated [ 4198.942884] wlp107s0: associate with d8:ec:5e:55:e0:8c (try 1/3) [ 4198.947102] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8c (capab=0x1511 status=0 aid=3) [ 4198.954866] wlp107s0: associated [ 4198.990909] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8c [ 4232.710292] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8c for new auth to d8:ec:5e:55:e0:8b [ 4232.780624] wlp107s0: authenticate with d8:ec:5e:55:e0:8b [ 4232.780642] wlp107s0: 80 MHz not supported, disabling VHT [ 4232.790834] wlp107s0: send auth to d8:ec:5e:55:e0:8b (try 1/3) [ 4232.823258] wlp107s0: authenticated [ 4232.824381] wlp107s0: associate with d8:ec:5e:55:e0:8b (try 1/3) [ 4232.832105] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8b (capab=0x1431 status=0 aid=4) [ 4232.852420] wlp107s0: associated [ 4232.895894] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8b [ 4239.245242] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8b for new auth to d8:ec:5e:55:e0:8c [ 4239.318483] wlp107s0: authenticate with d8:ec:5e:55:e0:8c [ 4239.340268] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 1/3) [ 4239.373983] iwlwifi 0000:6b:00.0: Unhandled alg: 0x3f0707 [ 4239.476190] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 2/3) [ 4239.478438] wlp107s0: authenticated [ 4239.479948] wlp107s0: associate with d8:ec:5e:55:e0:8c (try 1/3) [ 4239.484976] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8c (capab=0x1511 status=0 aid=3) [ 4239.494660] wlp107s0: associated [ 4239.537507] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8c [ 4308.488504] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8c for new auth to d8:ec:5e:55:e0:8b [ 4308.567175] wlp107s0: authenticate with d8:ec:5e:55:e0:8b [ 4308.567192] wlp107s0: 80 MHz not supported, disabling VHT [ 4308.593538] wlp107s0: send auth to d8:ec:5e:55:e0:8b (try 1/3) [ 4308.624791] wlp107s0: authenticated [ 4308.627514] wlp107s0: associate with d8:ec:5e:55:e0:8b (try 1/3) [ 4308.635604] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8b (capab=0x1431 status=0 aid=4) [ 4308.654580] wlp107s0: associated [ 4308.663934] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8b [ 4322.011722] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8b for new auth to d8:ec:5e:55:e0:8c [ 4322.099124] wlp107s0: authenticate with d8:ec:5e:55:e0:8c [ 4322.126578] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 1/3) [ 4322.159692] iwlwifi 0000:6b:00.0: Unhandled alg: 0x3f0707 [ 4322.263115] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 2/3) [ 4322.265325] wlp107s0: authenticated [ 4322.266750] wlp107s0: associate with d8:ec:5e:55:e0:8c (try 1/3) [ 4322.274028] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8c (capab=0x1511 status=0 aid=3) [ 4322.284696] wlp107s0: associated [ 4322.284814] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8c [ 4353.458390] audit: type=1326 audit(1689282511.452:194): auid=1000 uid=1000 gid=1000 ses=3 subj=snap.slack.slack pid=4612 comm="slack" exe="/snap/slack/82/usr/lib/slack/slack" sig=0 arch=c000003e syscall=92 compat=0 ip=0x7f2190deb3b7 code=0x50000 [ 4356.402422] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8c for new auth to d8:ec:5e:55:e0:8b [ 4356.487111] wlp107s0: authenticate with d8:ec:5e:55:e0:8b [ 4356.487141] wlp107s0: 80 MHz not supported, disabling VHT [ 4356.494397] wlp107s0: send auth to d8:ec:5e:55:e0:8b (try 1/3) [ 4356.526786] wlp107s0: authenticated [ 4356.533099] wlp107s0: associate with d8:ec:5e:55:e0:8b (try 1/3) [ 4356.541336] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8b (capab=0x1431 status=0 aid=4) [ 4356.560506] wlp107s0: associated [ 4356.587909] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8b [ 4417.528182] wlp107s0: Connection to AP d8:ec:5e:55:e0:8b lost [ 4417.779354] wlp107s0: authenticate with d8:ec:5e:55:e0:8c [ 4417.798206] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 1/3) [ 4417.832982] wlp107s0: authenticated [ 4417.838138] wlp107s0: associate with d8:ec:5e:55:e0:8c (try 1/3) [ 4417.844717] wlp107s0: RX AssocResp from d8:ec:5e:55:e0:8c (capab=0x1511 status=0 aid=3) [ 4417.863388] wlp107s0: associated [ 4417.920474] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8c [ 4934.359789] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8c for new auth to d8:ec:5e:55:e0:8b [ 4934.464661] wlp107s0: authenticate with d8:ec:5e:55:e0:8b [ 4934.464680] wlp107s0: 80 MHz not supported, disabling VHT [ 4934.476351] wlp107s0: send auth to d8:ec:5e:55:e0:8b (try 1/3) [ 4934.509215] wlp107s0: authenticated [ 4934.514070] wlp107s0: associate with d8:ec:5e:55:e0:8b (try 1/3) [ 4934.523098] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8b (capab=0x1431 status=0 aid=4) [ 4934.541658] wlp107s0: associated [ 4934.541818] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8b [ 4944.183216] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8b for new auth to d8:ec:5e:55:e0:8c [ 4944.270025] wlp107s0: authenticate with d8:ec:5e:55:e0:8c [ 4944.285687] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 1/3) [ 4944.318374] iwlwifi 0000:6b:00.0: Unhandled alg: 0x3f0707 [ 4944.417653] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 2/3) [ 4944.419767] wlp107s0: authenticated [ 4944.425647] wlp107s0: associate with d8:ec:5e:55:e0:8c (try 1/3) [ 4944.432523] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8c (capab=0x1511 status=0 aid=3) [ 4944.445839] wlp107s0: associated [ 4944.575291] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8c [ 5531.979477] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8c for new auth to d8:ec:5e:55:e0:8b [ 5532.058291] wlp107s0: authenticate with d8:ec:5e:55:e0:8b [ 5532.058311] wlp107s0: 80 MHz not supported, disabling VHT [ 5532.063435] wlp107s0: send auth to d8:ec:5e:55:e0:8b (try 1/3) [ 5532.095289] wlp107s0: authenticated [ 5532.098195] wlp107s0: associate with d8:ec:5e:55:e0:8b (try 1/3) [ 5532.106051] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8b (capab=0x1431 status=0 aid=4) [ 5532.120135] wlp107s0: associated [ 5532.165909] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8b [ 6363.896810] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8b for new auth to d8:ec:5e:55:e0:8c [ 6363.974386] wlp107s0: authenticate with d8:ec:5e:55:e0:8c [ 6363.984948] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 1/3) [ 6364.018667] wlp107s0: authenticated [ 6364.022428] wlp107s0: associate with d8:ec:5e:55:e0:8c (try 1/3) [ 6364.027148] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8c (capab=0x1511 status=0 aid=3) [ 6364.043222] wlp107s0: associated [ 6364.079314] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8c [ 7404.717516] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [ 7404.717616] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [ 7404.717661] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [ 7540.192245] audit: type=1326 audit(1689285698.193:195): auid=1000 uid=1000 gid=1000 ses=3 subj=snap.slack.slack pid=4612 comm="slack" exe="/snap/slack/82/usr/lib/slack/slack" sig=0 arch=c000003e syscall=92 compat=0 ip=0x7f2190deb3b7 code=0x50000 [ 7602.947617] audit: type=1326 audit(1689285760.949:196): auid=1000 uid=1000 gid=1000 ses=3 subj=snap.slack.slack pid=4612 comm="slack" exe="/snap/slack/82/usr/lib/slack/slack" sig=0 arch=c000003e syscall=92 compat=0 ip=0x7f2190deb3b7 code=0x50000 [ 7750.939132] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [ 7750.939234] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [ 7750.939264] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [ 7826.427522] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8c for new auth to d8:ec:5e:55:e0:8b [ 7826.498183] wlp107s0: authenticate with d8:ec:5e:55:e0:8b [ 7826.498203] wlp107s0: 80 MHz not supported, disabling VHT [ 7826.503486] wlp107s0: send auth to d8:ec:5e:55:e0:8b (try 1/3) [ 7826.534477] wlp107s0: authenticated [ 7826.537474] wlp107s0: associate with d8:ec:5e:55:e0:8b (try 1/3) [ 7826.547551] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8b (capab=0x1431 status=0 aid=5) [ 7826.560790] wlp107s0: associated [ 7826.591380] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8b [ 7834.898580] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8b for new auth to d8:ec:5e:55:e0:8c [ 7834.985152] wlp107s0: authenticate with d8:ec:5e:55:e0:8c [ 7834.992896] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 1/3) [ 7835.025269] iwlwifi 0000:6b:00.0: Unhandled alg: 0x3f0707 [ 7835.125802] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 2/3) [ 7835.128489] wlp107s0: authenticated [ 7835.129535] wlp107s0: associate with d8:ec:5e:55:e0:8c (try 1/3) [ 7835.134558] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8c (capab=0x1511 status=0 aid=1) [ 7835.142676] wlp107s0: associated [ 7835.183126] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8c [ 7984.915495] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8c for new auth to d8:ec:5e:55:e0:8b [ 7984.980012] wlp107s0: authenticate with d8:ec:5e:55:e0:8b [ 7984.980027] wlp107s0: 80 MHz not supported, disabling VHT [ 7984.987365] wlp107s0: send auth to d8:ec:5e:55:e0:8b (try 1/3) [ 7985.018822] wlp107s0: authenticated [ 7985.022882] wlp107s0: associate with d8:ec:5e:55:e0:8b (try 1/3) [ 7985.030853] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8b (capab=0x1431 status=0 aid=5) [ 7985.045481] wlp107s0: associated [ 7985.311009] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8b [ 8216.264739] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [ 8216.264820] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [ 8216.265725] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [ 8217.673661] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8b for new auth to d8:ec:5e:55:e0:8c [ 8217.752222] wlp107s0: authenticate with d8:ec:5e:55:e0:8c [ 8217.758525] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 1/3) [ 8217.791449] wlp107s0: authenticated [ 8217.792614] wlp107s0: associate with d8:ec:5e:55:e0:8c (try 1/3) [ 8217.798556] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8c (capab=0x1511 status=0 aid=1) [ 8217.811744] wlp107s0: associated [ 8217.856997] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8c [ 8286.193664] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8c for new auth to d8:ec:5e:55:e0:8b [ 8286.257269] wlp107s0: authenticate with d8:ec:5e:55:e0:8b [ 8286.257283] wlp107s0: 80 MHz not supported, disabling VHT [ 8286.263504] wlp107s0: send auth to d8:ec:5e:55:e0:8b (try 1/3) [ 8286.296799] wlp107s0: authenticated [ 8286.300528] wlp107s0: associate with d8:ec:5e:55:e0:8b (try 1/3) [ 8286.310250] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8b (capab=0x1431 status=0 aid=5) [ 8286.328961] wlp107s0: associated [ 8286.477611] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8b [ 8318.274377] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [ 8318.274421] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [ 8318.275394] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [ 8541.709193] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8b for new auth to d8:ec:5e:55:e0:8c [ 8541.788721] wlp107s0: authenticate with d8:ec:5e:55:e0:8c [ 8541.795297] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 1/3) [ 8541.829301] wlp107s0: authenticated [ 8541.836578] wlp107s0: associate with d8:ec:5e:55:e0:8c (try 1/3) [ 8541.841479] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8c (capab=0x1511 status=0 aid=1) [ 8541.853824] wlp107s0: associated [ 8541.854431] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8c [ 8643.329822] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8c for new auth to d8:ec:5e:55:e0:8b [ 8643.400781] wlp107s0: authenticate with d8:ec:5e:55:e0:8b [ 8643.400797] wlp107s0: 80 MHz not supported, disabling VHT [ 8643.405263] wlp107s0: send auth to d8:ec:5e:55:e0:8b (try 1/3) [ 8643.443225] wlp107s0: authenticated [ 8643.444882] wlp107s0: associate with d8:ec:5e:55:e0:8b (try 1/3) [ 8643.453312] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8b (capab=0x1431 status=0 aid=5) [ 8643.468486] wlp107s0: associated [ 8643.545066] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8b [ 8652.662387] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8b for new auth to d8:ec:5e:55:e0:8c [ 8652.736510] wlp107s0: authenticate with d8:ec:5e:55:e0:8c [ 8652.756564] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 1/3) [ 8652.790665] iwlwifi 0000:6b:00.0: Unhandled alg: 0x3f0707 [ 8652.893371] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 2/3) [ 8652.895681] wlp107s0: authenticated [ 8652.897145] wlp107s0: associate with d8:ec:5e:55:e0:8c (try 1/3) [ 8652.903099] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8c (capab=0x1511 status=0 aid=1) [ 8652.916841] wlp107s0: associated [ 8652.960391] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8c [ 8686.190690] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8c for new auth to d8:ec:5e:55:e0:8b [ 8686.267825] wlp107s0: authenticate with d8:ec:5e:55:e0:8b [ 8686.267841] wlp107s0: 80 MHz not supported, disabling VHT [ 8686.272325] wlp107s0: send auth to d8:ec:5e:55:e0:8b (try 1/3) [ 8686.303753] wlp107s0: authenticated [ 8686.305016] wlp107s0: associate with d8:ec:5e:55:e0:8b (try 1/3) [ 8686.314442] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8b (capab=0x1431 status=0 aid=5) [ 8686.329559] wlp107s0: associated [ 8686.348713] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8b [ 8739.550425] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8b for new auth to d8:ec:5e:55:e0:8c [ 8739.613278] wlp107s0: authenticate with d8:ec:5e:55:e0:8c [ 8739.619630] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 1/3) [ 8739.652600] wlp107s0: authenticated [ 8739.657284] wlp107s0: associate with d8:ec:5e:55:e0:8c (try 1/3) [ 8739.661724] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8c (capab=0x1511 status=0 aid=1) [ 8739.674965] wlp107s0: associated [ 8739.701740] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8c [ 8882.451280] perf: interrupt took too long (2534 > 2500), lowering kernel.perf_event_max_sample_rate to 78750 [ 8941.543670] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8c for new auth to d8:ec:5e:55:e0:8b [ 8941.609033] wlp107s0: authenticate with d8:ec:5e:55:e0:8b [ 8941.609046] wlp107s0: 80 MHz not supported, disabling VHT [ 8941.615215] wlp107s0: send auth to d8:ec:5e:55:e0:8b (try 1/3) [ 8941.646637] wlp107s0: authenticated [ 8941.650224] wlp107s0: associate with d8:ec:5e:55:e0:8b (try 1/3) [ 8941.658646] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8b (capab=0x1431 status=0 aid=5) [ 8941.673245] wlp107s0: associated [ 8941.747352] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8b [ 8992.655700] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8b for new auth to d8:ec:5e:55:e0:8c [ 8992.726999] wlp107s0: authenticate with d8:ec:5e:55:e0:8c [ 8992.733352] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 1/3) [ 8992.767112] wlp107s0: authenticated [ 8992.774442] wlp107s0: associate with d8:ec:5e:55:e0:8c (try 1/3) [ 8992.779046] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8c (capab=0x1511 status=0 aid=1) [ 8992.791658] wlp107s0: associated [ 8992.829633] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8c [ 9028.228287] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8c for new auth to d8:ec:5e:55:e0:8b [ 9028.303269] wlp107s0: authenticate with d8:ec:5e:55:e0:8b [ 9028.303288] wlp107s0: 80 MHz not supported, disabling VHT [ 9028.308281] wlp107s0: send auth to d8:ec:5e:55:e0:8b (try 1/3) [ 9028.339756] wlp107s0: authenticated [ 9028.342720] wlp107s0: associate with d8:ec:5e:55:e0:8b (try 1/3) [ 9028.350733] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8b (capab=0x1431 status=0 aid=5) [ 9028.372786] wlp107s0: associated [ 9028.372824] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8b [ 9057.152063] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8b for new auth to d8:ec:5e:55:e0:8c [ 9057.210322] wlp107s0: authenticate with d8:ec:5e:55:e0:8c [ 9057.216318] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 1/3) [ 9057.251034] iwlwifi 0000:6b:00.0: Unhandled alg: 0x3f0707 [ 9057.350862] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 2/3) [ 9057.352892] wlp107s0: authenticated [ 9057.358884] wlp107s0: associate with d8:ec:5e:55:e0:8c (try 1/3) [ 9057.363230] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8c (capab=0x1511 status=0 aid=1) [ 9057.371256] wlp107s0: associated [ 9057.444942] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8c [ 9067.135877] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8c for new auth to d8:ec:5e:55:e0:8b [ 9067.215519] wlp107s0: authenticate with d8:ec:5e:55:e0:8b [ 9067.215537] wlp107s0: 80 MHz not supported, disabling VHT [ 9067.233322] wlp107s0: send auth to d8:ec:5e:55:e0:8b (try 1/3) [ 9067.264387] iwlwifi 0000:6b:00.0: Unhandled alg: 0x3f0707 [ 9067.366940] wlp107s0: send auth to d8:ec:5e:55:e0:8b (try 2/3) [ 9067.370005] wlp107s0: authenticated [ 9067.374994] wlp107s0: associate with d8:ec:5e:55:e0:8b (try 1/3) [ 9067.387008] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8b (capab=0x1431 status=0 aid=5) [ 9067.395640] wlp107s0: associated [ 9067.486641] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8b [ 9098.324717] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8b for new auth to d8:ec:5e:55:e0:8c [ 9098.407339] wlp107s0: authenticate with d8:ec:5e:55:e0:8c [ 9098.424096] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 1/3) [ 9098.457099] wlp107s0: authenticated [ 9098.459061] wlp107s0: associate with d8:ec:5e:55:e0:8c (try 1/3) [ 9098.464403] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8c (capab=0x1511 status=0 aid=1) [ 9098.479329] wlp107s0: associated [ 9098.507979] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8c [ 9166.816405] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8c for new auth to d8:ec:5e:55:e0:8b [ 9166.884743] wlp107s0: authenticate with d8:ec:5e:55:e0:8b [ 9166.884763] wlp107s0: 80 MHz not supported, disabling VHT [ 9166.891819] wlp107s0: send auth to d8:ec:5e:55:e0:8b (try 1/3) [ 9166.923554] wlp107s0: authenticated [ 9166.927562] wlp107s0: associate with d8:ec:5e:55:e0:8b (try 1/3) [ 9166.937771] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8b (capab=0x1431 status=0 aid=5) [ 9166.952853] wlp107s0: associated [ 9167.020142] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8b [ 9181.623254] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [ 9181.623327] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [ 9181.624268] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [ 9278.158960] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8b for new auth to d8:ec:5e:55:e0:8c [ 9278.218353] wlp107s0: authenticate with d8:ec:5e:55:e0:8c [ 9278.229784] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 1/3) [ 9278.263404] wlp107s0: authenticated [ 9278.264219] wlp107s0: associate with d8:ec:5e:55:e0:8c (try 1/3) [ 9278.270656] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8c (capab=0x1511 status=0 aid=1) [ 9278.284144] wlp107s0: associated [ 9278.324393] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8c [ 9379.834811] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8c for new auth to d8:ec:5e:55:e0:8b [ 9379.885408] wlp107s0: authenticate with d8:ec:5e:55:e0:8b [ 9379.885424] wlp107s0: 80 MHz not supported, disabling VHT [ 9379.890391] wlp107s0: send auth to d8:ec:5e:55:e0:8b (try 1/3) [ 9379.921560] wlp107s0: authenticated [ 9379.925012] wlp107s0: associate with d8:ec:5e:55:e0:8b (try 1/3) [ 9379.932941] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8b (capab=0x1431 status=0 aid=5) [ 9379.954681] wlp107s0: associated [ 9380.014777] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8b [ 9415.640353] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [ 9415.640462] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [ 9415.640524] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [ 9606.971592] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8b for new auth to d8:ec:5e:55:e0:8c [ 9607.048033] wlp107s0: authenticate with d8:ec:5e:55:e0:8c [ 9607.057231] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 1/3) [ 9607.090296] wlp107s0: authenticated [ 9607.094526] wlp107s0: associate with d8:ec:5e:55:e0:8c (try 1/3) [ 9607.100431] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8c (capab=0x1511 status=0 aid=1) [ 9607.113741] wlp107s0: associated [ 9607.140444] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8c [ 9621.715791] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8c for new auth to d8:ec:5e:55:e0:8b [ 9621.791148] wlp107s0: authenticate with d8:ec:5e:55:e0:8b [ 9621.791196] wlp107s0: 80 MHz not supported, disabling VHT [ 9621.796963] wlp107s0: send auth to d8:ec:5e:55:e0:8b (try 1/3) [ 9621.830332] iwlwifi 0000:6b:00.0: Unhandled alg: 0x3f0707 [ 9621.934597] wlp107s0: send auth to d8:ec:5e:55:e0:8b (try 2/3) [ 9621.937809] wlp107s0: authenticated [ 9621.938599] wlp107s0: associate with d8:ec:5e:55:e0:8b (try 1/3) [ 9621.946740] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8b (capab=0x1431 status=0 aid=5) [ 9621.955025] wlp107s0: associated [ 9621.988793] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8b [ 9661.436084] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8b for new auth to d8:ec:5e:55:e0:8c [ 9661.542981] wlp107s0: authenticate with d8:ec:5e:55:e0:8c [ 9661.555063] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 1/3) [ 9661.602689] wlp107s0: authenticated [ 9661.606893] wlp107s0: associate with d8:ec:5e:55:e0:8c (try 1/3) [ 9661.620658] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8c (capab=0x1511 status=0 aid=1) [ 9661.634880] wlp107s0: associated [ 9661.715036] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8c [ 9730.047998] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8c for new auth to d8:ec:5e:55:e0:8b [ 9730.113820] wlp107s0: authenticate with d8:ec:5e:55:e0:8b [ 9730.113837] wlp107s0: 80 MHz not supported, disabling VHT [ 9730.120734] wlp107s0: send auth to d8:ec:5e:55:e0:8b (try 1/3) [ 9730.154960] wlp107s0: authenticated [ 9730.159432] wlp107s0: associate with d8:ec:5e:55:e0:8b (try 1/3) [ 9730.168434] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8b (capab=0x1431 status=0 aid=5) [ 9730.184567] wlp107s0: associated [ 9730.329423] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8b [ 9750.756820] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8b for new auth to d8:ec:5e:55:e0:8c [ 9750.817265] wlp107s0: authenticate with d8:ec:5e:55:e0:8c [ 9750.823385] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 1/3) [ 9750.855850] iwlwifi 0000:6b:00.0: Unhandled alg: 0x3f0707 [ 9750.955534] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 2/3) [ 9750.957382] wlp107s0: authenticated [ 9750.963523] wlp107s0: associate with d8:ec:5e:55:e0:8c (try 1/3) [ 9750.967945] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8c (capab=0x1511 status=0 aid=1) [ 9750.975147] wlp107s0: associated [ 9751.012139] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8c [ 9803.498443] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [ 9803.498497] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [ 9803.499454] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [ 9837.890833] audit: type=1400 audit(1689287995.876:197): apparmor="DENIED" operation="open" class="file" profile="snap.snap-store.ubuntu-software" name="/var/lib/snapd/hostfs/usr/share/discord/discord.desktop" pid=2108 comm="pool-org.gnome." requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [ 9837.916871] audit: type=1400 audit(1689287995.904:198): apparmor="DENIED" operation="open" class="file" profile="snap.snap-store.ubuntu-software" name="/var/lib/snapd/hostfs/usr/share/discord/discord.desktop" pid=2108 comm="pool-org.gnome." requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [ 9838.205333] audit: type=1326 audit(1689287996.192:199): auid=1000 uid=1000 gid=1000 ses=3 subj=snap.snap-store.ubuntu-software pid=2108 comm="pool-org.gnome." exe="/snap/snap-store/959/usr/bin/snap-store" sig=0 arch=c000003e syscall=93 compat=0 ip=0x7fd713138c4b code=0x50000 [10122.980795] audit: type=1326 audit(1689288280.962:200): auid=1000 uid=1000 gid=1000 ses=3 subj=snap.slack.slack pid=4612 comm="slack" exe="/snap/slack/82/usr/lib/slack/slack" sig=0 arch=c000003e syscall=92 compat=0 ip=0x7f2190deb3b7 code=0x50000 [10274.011575] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8c for new auth to d8:ec:5e:55:e0:8b [10274.078445] wlp107s0: authenticate with d8:ec:5e:55:e0:8b [10274.078463] wlp107s0: 80 MHz not supported, disabling VHT [10274.082947] wlp107s0: send auth to d8:ec:5e:55:e0:8b (try 1/3) [10274.115267] wlp107s0: authenticated [10274.117484] wlp107s0: associate with d8:ec:5e:55:e0:8b (try 1/3) [10274.126380] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8b (capab=0x1431 status=0 aid=4) [10274.143733] wlp107s0: associated [10274.184439] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8b [10307.933980] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8b for new auth to d8:ec:5e:55:e0:8c [10308.017994] wlp107s0: authenticate with d8:ec:5e:55:e0:8c [10308.025456] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 1/3) [10308.057892] wlp107s0: authenticated [10308.063298] wlp107s0: associate with d8:ec:5e:55:e0:8c (try 1/3) [10308.068114] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8c (capab=0x1511 status=0 aid=1) [10308.081363] wlp107s0: associated [10308.081402] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8c [10343.446592] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8c for new auth to d8:ec:5e:55:e0:8b [10343.535499] wlp107s0: authenticate with d8:ec:5e:55:e0:8b [10343.535517] wlp107s0: 80 MHz not supported, disabling VHT [10343.543674] wlp107s0: send auth to d8:ec:5e:55:e0:8b (try 1/3) [10343.577841] wlp107s0: authenticated [10343.581461] wlp107s0: associate with d8:ec:5e:55:e0:8b (try 1/3) [10343.590047] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8b (capab=0x1431 status=0 aid=4) [10343.605720] wlp107s0: associated [10343.610714] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8b [10417.868196] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8b for new auth to d8:ec:5e:55:e0:8c [10417.948659] wlp107s0: authenticate with d8:ec:5e:55:e0:8c [10417.959794] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 1/3) [10417.993960] wlp107s0: authenticated [10417.997632] wlp107s0: associate with d8:ec:5e:55:e0:8c (try 1/3) [10418.003052] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8c (capab=0x1511 status=0 aid=1) [10418.019878] wlp107s0: associated [10418.050685] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8c [10519.748429] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8c for new auth to d8:ec:5e:55:e0:8b [10519.809571] wlp107s0: authenticate with d8:ec:5e:55:e0:8b [10519.809587] wlp107s0: 80 MHz not supported, disabling VHT [10519.818118] wlp107s0: send auth to d8:ec:5e:55:e0:8b (try 1/3) [10519.851195] wlp107s0: authenticated [10519.854490] wlp107s0: associate with d8:ec:5e:55:e0:8b (try 1/3) [10519.865593] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8b (capab=0x1431 status=0 aid=4) [10519.879846] wlp107s0: associated [10519.951912] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8b [10528.464333] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8b for new auth to d8:ec:5e:55:e0:8c [10528.533211] wlp107s0: authenticate with d8:ec:5e:55:e0:8c [10528.545315] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 1/3) [10528.577996] iwlwifi 0000:6b:00.0: Unhandled alg: 0x3f0707 [10528.678921] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 2/3) [10528.681165] wlp107s0: authenticated [10528.682919] wlp107s0: associate with d8:ec:5e:55:e0:8c (try 1/3) [10528.687421] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8c (capab=0x1511 status=0 aid=1) [10528.699064] wlp107s0: associated [10528.746878] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8c [10561.950315] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8c for new auth to d8:ec:5e:55:e0:8b [10561.984660] wlp107s0: authenticate with d8:ec:5e:55:e0:8b [10561.984678] wlp107s0: 80 MHz not supported, disabling VHT [10561.989152] wlp107s0: send auth to d8:ec:5e:55:e0:8b (try 1/3) [10562.020766] wlp107s0: authenticated [10562.028401] wlp107s0: associate with d8:ec:5e:55:e0:8b (try 1/3) [10562.040746] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8b (capab=0x1431 status=0 aid=4) [10562.059680] wlp107s0: associated [10562.135580] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8b [10711.368568] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8b for new auth to d8:ec:5e:55:e0:8c [10711.417915] wlp107s0: authenticate with d8:ec:5e:55:e0:8c [10711.431519] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 1/3) [10711.465413] wlp107s0: authenticated [10711.466150] wlp107s0: associate with d8:ec:5e:55:e0:8c (try 1/3) [10711.472790] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8c (capab=0x1511 status=0 aid=1) [10711.490192] wlp107s0: associated [10711.534535] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8c [11140.237473] audit: type=1326 audit(1689289298.186:201): auid=1000 uid=1000 gid=1000 ses=3 subj=snap.slack.slack pid=4612 comm="slack" exe="/snap/slack/82/usr/lib/slack/slack" sig=0 arch=c000003e syscall=92 compat=0 ip=0x7f2190deb3b7 code=0x50000 [11281.019688] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8c for new auth to d8:ec:5e:55:e0:8b [11281.086451] wlp107s0: authenticate with d8:ec:5e:55:e0:8b [11281.086473] wlp107s0: 80 MHz not supported, disabling VHT [11281.090962] wlp107s0: send auth to d8:ec:5e:55:e0:8b (try 1/3) [11281.121917] wlp107s0: authenticated [11281.129672] wlp107s0: associate with d8:ec:5e:55:e0:8b (try 1/3) [11281.138104] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8b (capab=0x1431 status=0 aid=4) [11281.156687] wlp107s0: associated [11281.304427] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8b [11287.068419] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8b for new auth to d8:ec:5e:55:e0:8c [11287.135703] wlp107s0: authenticate with d8:ec:5e:55:e0:8c [11287.148227] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 1/3) [11287.181275] iwlwifi 0000:6b:00.0: Unhandled alg: 0x3f0707 [11287.282112] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 2/3) [11287.284248] wlp107s0: authenticated [11287.285848] wlp107s0: associate with d8:ec:5e:55:e0:8c (try 1/3) [11287.291290] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8c (capab=0x1511 status=0 aid=1) [11287.302507] wlp107s0: associated [11287.344604] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8c [11720.931666] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8c for new auth to d8:ec:5e:55:e0:8b [11721.006579] wlp107s0: authenticate with d8:ec:5e:55:e0:8b [11721.006593] wlp107s0: 80 MHz not supported, disabling VHT [11721.014853] wlp107s0: send auth to d8:ec:5e:55:e0:8b (try 1/3) [11721.047800] wlp107s0: authenticated [11721.054135] wlp107s0: associate with d8:ec:5e:55:e0:8b (try 1/3) [11721.065595] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8b (capab=0x1431 status=0 aid=5) [11721.079803] wlp107s0: associated [11721.223328] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8b [11762.812388] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8b for new auth to d8:ec:5e:55:e0:8c [11762.894658] wlp107s0: authenticate with d8:ec:5e:55:e0:8c [11762.905661] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 1/3) [11762.940387] wlp107s0: authenticated [11762.942869] wlp107s0: associate with d8:ec:5e:55:e0:8c (try 1/3) [11762.947558] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8c (capab=0x1511 status=0 aid=1) [11762.961152] wlp107s0: associated [11762.997134] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8c [11828.258005] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8c for new auth to d8:ec:5e:55:e0:8b [11828.324302] wlp107s0: authenticate with d8:ec:5e:55:e0:8b [11828.324319] wlp107s0: 80 MHz not supported, disabling VHT [11828.330689] wlp107s0: send auth to d8:ec:5e:55:e0:8b (try 1/3) [11828.368202] wlp107s0: authenticated [11828.372238] wlp107s0: associate with d8:ec:5e:55:e0:8b (try 1/3) [11828.380503] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8b (capab=0x1431 status=0 aid=5) [11828.400094] wlp107s0: associated [11828.448455] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8b [11841.077786] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8b for new auth to d8:ec:5e:55:e0:8c [11841.210749] wlp107s0: authenticate with d8:ec:5e:55:e0:8c [11841.240606] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 1/3) [11841.276917] iwlwifi 0000:6b:00.0: Unhandled alg: 0x3f0707 [11841.376135] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 2/3) [11841.378082] wlp107s0: authenticated [11841.380198] wlp107s0: associate with d8:ec:5e:55:e0:8c (try 1/3) [11841.385001] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8c (capab=0x1511 status=0 aid=1) [11841.392319] wlp107s0: associated [11841.439189] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8c [11975.103524] audit: type=1326 audit(1689290133.038:202): auid=1000 uid=1000 gid=1000 ses=3 subj=snap.slack.slack pid=4612 comm="slack" exe="/snap/slack/82/usr/lib/slack/slack" sig=0 arch=c000003e syscall=92 compat=0 ip=0x7f2190deb3b7 code=0x50000 [11989.424849] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8c for new auth to d8:ec:5e:55:e0:8b [11989.491191] wlp107s0: authenticate with d8:ec:5e:55:e0:8b [11989.491210] wlp107s0: 80 MHz not supported, disabling VHT [11989.496502] wlp107s0: send auth to d8:ec:5e:55:e0:8b (try 1/3) [11989.527742] wlp107s0: authenticated [11989.534619] wlp107s0: associate with d8:ec:5e:55:e0:8b (try 1/3) [11989.543041] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8b (capab=0x1431 status=0 aid=7) [11989.559500] wlp107s0: associated [11989.618945] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8b [12019.939684] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8b for new auth to d8:ec:5e:55:e0:8c [12020.003384] wlp107s0: authenticate with d8:ec:5e:55:e0:8c [12020.011369] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 1/3) [12020.044565] wlp107s0: authenticated [12020.051090] wlp107s0: associate with d8:ec:5e:55:e0:8c (try 1/3) [12020.055884] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8c (capab=0x1511 status=0 aid=1) [12020.069156] wlp107s0: associated [12020.128433] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8c [12246.204335] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [12246.204366] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [12246.205358] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [12252.808907] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8c for new auth to d8:ec:5e:55:e0:8b [12252.867255] wlp107s0: authenticate with d8:ec:5e:55:e0:8b [12252.867272] wlp107s0: 80 MHz not supported, disabling VHT [12252.872239] wlp107s0: send auth to d8:ec:5e:55:e0:8b (try 1/3) [12252.903002] wlp107s0: authenticated [12252.906806] wlp107s0: associate with d8:ec:5e:55:e0:8b (try 1/3) [12252.915483] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8b (capab=0x1431 status=0 aid=7) [12252.929854] wlp107s0: associated [12252.993722] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8b [12283.146357] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [12283.146444] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [12283.146471] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [12299.014445] audit: type=1326 audit(1689290456.940:203): auid=1000 uid=1000 gid=1000 ses=3 subj=snap.slack.slack pid=4612 comm="slack" exe="/snap/slack/82/usr/lib/slack/slack" sig=0 arch=c000003e syscall=92 compat=0 ip=0x7f2190deb3b7 code=0x50000 [12302.865354] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [12302.865398] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [12302.866365] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [12317.933098] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8b for new auth to d8:ec:5e:55:e0:8c [12318.007584] wlp107s0: authenticate with d8:ec:5e:55:e0:8c [12318.015365] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 1/3) [12318.048393] wlp107s0: authenticated [12318.055769] wlp107s0: associate with d8:ec:5e:55:e0:8c (try 1/3) [12318.061052] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8c (capab=0x1511 status=0 aid=1) [12318.074117] wlp107s0: associated [12318.218118] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8c [12334.591759] audit: type=1326 audit(1689290492.516:204): auid=1000 uid=1000 gid=1000 ses=3 subj=snap.slack.slack pid=4612 comm="slack" exe="/snap/slack/82/usr/lib/slack/slack" sig=0 arch=c000003e syscall=92 compat=0 ip=0x7f2190deb3b7 code=0x50000 [12350.480998] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8c for new auth to d8:ec:5e:55:e0:8b [12350.536287] wlp107s0: authenticate with d8:ec:5e:55:e0:8b [12350.536306] wlp107s0: 80 MHz not supported, disabling VHT [12350.540938] wlp107s0: send auth to d8:ec:5e:55:e0:8b (try 1/3) [12350.573588] wlp107s0: authenticated [12350.576323] wlp107s0: associate with d8:ec:5e:55:e0:8b (try 1/3) [12350.604679] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8b (capab=0x1431 status=0 aid=7) [12350.646354] wlp107s0: associated [12350.688542] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8b [12402.775383] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [12402.775493] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [12402.775536] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [12411.987666] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [12411.987764] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [12411.987794] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [12427.886356] audit: type=1326 audit(1689290585.810:205): auid=1000 uid=1000 gid=1000 ses=3 subj=snap.slack.slack pid=4612 comm="slack" exe="/snap/slack/82/usr/lib/slack/slack" sig=0 arch=c000003e syscall=92 compat=0 ip=0x7f2190deb3b7 code=0x50000 [12429.986049] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8b for new auth to d8:ec:5e:55:e0:8c [12430.063722] wlp107s0: authenticate with d8:ec:5e:55:e0:8c [12430.071062] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 1/3) [12430.104195] wlp107s0: authenticated [12430.109494] wlp107s0: associate with d8:ec:5e:55:e0:8c (try 1/3) [12430.114392] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8c (capab=0x1511 status=0 aid=1) [12430.127282] wlp107s0: associated [12430.146748] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8c [12443.887632] audit: type=1326 audit(1689290601.810:206): auid=1000 uid=1000 gid=1000 ses=3 subj=snap.slack.slack pid=4612 comm="slack" exe="/snap/slack/82/usr/lib/slack/slack" sig=0 arch=c000003e syscall=92 compat=0 ip=0x7f2190deb3b7 code=0x50000 [12499.023710] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8c for new auth to d8:ec:5e:55:e0:8b [12499.096607] wlp107s0: authenticate with d8:ec:5e:55:e0:8b [12499.096622] wlp107s0: 80 MHz not supported, disabling VHT [12499.101036] wlp107s0: send auth to d8:ec:5e:55:e0:8b (try 1/3) [12499.131966] wlp107s0: authenticated [12499.138602] wlp107s0: associate with d8:ec:5e:55:e0:8b (try 1/3) [12499.146674] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8b (capab=0x1431 status=0 aid=7) [12499.161460] wlp107s0: associated [12499.166004] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8b [12506.683358] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8b for new auth to d8:ec:5e:55:e0:8c [12506.751736] wlp107s0: authenticate with d8:ec:5e:55:e0:8c [12506.759968] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 1/3) [12506.793212] iwlwifi 0000:6b:00.0: Unhandled alg: 0x3f0707 [12506.894708] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 2/3) [12506.896793] wlp107s0: authenticated [12506.898773] wlp107s0: associate with d8:ec:5e:55:e0:8c (try 1/3) [12506.903741] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8c (capab=0x1511 status=0 aid=1) [12506.913170] wlp107s0: associated [12506.942411] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8c [12507.653908] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [12507.653982] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [12507.654900] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [12525.025241] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [12525.025402] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [12525.025450] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [12540.932810] audit: type=1326 audit(1689290698.857:207): auid=1000 uid=1000 gid=1000 ses=3 subj=snap.slack.slack pid=4612 comm="slack" exe="/snap/slack/82/usr/lib/slack/slack" sig=0 arch=c000003e syscall=92 compat=0 ip=0x7f2190deb3b7 code=0x50000 [12542.176023] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8c for new auth to d8:ec:5e:55:e0:8b [12542.248736] wlp107s0: authenticate with d8:ec:5e:55:e0:8b [12542.248751] wlp107s0: 80 MHz not supported, disabling VHT [12542.256186] wlp107s0: send auth to d8:ec:5e:55:e0:8b (try 1/3) [12542.288114] wlp107s0: authenticated [12542.291286] wlp107s0: associate with d8:ec:5e:55:e0:8b (try 1/3) [12542.300100] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8b (capab=0x1431 status=0 aid=7) [12542.316235] wlp107s0: associated [12542.380165] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8b [12545.333610] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [12545.333760] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [12545.333794] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [12558.069700] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8b for new auth to d8:ec:5e:55:e0:8c [12558.131708] wlp107s0: authenticate with d8:ec:5e:55:e0:8c [12558.140202] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 1/3) [12558.172989] iwlwifi 0000:6b:00.0: Unhandled alg: 0x3f0707 [12558.275544] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 2/3) [12558.278211] wlp107s0: authenticated [12558.279636] wlp107s0: associate with d8:ec:5e:55:e0:8c (try 1/3) [12558.285016] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8c (capab=0x1511 status=0 aid=1) [12558.294844] wlp107s0: associated [12558.348116] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8c [12564.933576] audit: type=1326 audit(1689290722.856:208): auid=1000 uid=1000 gid=1000 ses=3 subj=snap.slack.slack pid=4612 comm="slack" exe="/snap/slack/82/usr/lib/slack/slack" sig=0 arch=c000003e syscall=92 compat=0 ip=0x7f2190deb3b7 code=0x50000 [12620.103410] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [12620.103487] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [12620.103574] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [12623.509668] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8c for new auth to d8:ec:5e:55:e0:8b [12623.602495] wlp107s0: authenticate with d8:ec:5e:55:e0:8b [12623.602545] wlp107s0: 80 MHz not supported, disabling VHT [12623.608940] wlp107s0: send auth to d8:ec:5e:55:e0:8b (try 1/3) [12623.640720] wlp107s0: authenticated [12623.644447] wlp107s0: associate with d8:ec:5e:55:e0:8b (try 1/3) [12623.654017] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8b (capab=0x1431 status=0 aid=7) [12623.668454] wlp107s0: associated [12623.686002] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8b [12635.998879] audit: type=1326 audit(1689290793.919:209): auid=1000 uid=1000 gid=1000 ses=3 subj=snap.slack.slack pid=4612 comm="slack" exe="/snap/slack/82/usr/lib/slack/slack" sig=0 arch=c000003e syscall=92 compat=0 ip=0x7f2190deb3b7 code=0x50000 [12657.390307] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8b for new auth to d8:ec:5e:55:e0:8c [12657.444889] wlp107s0: authenticate with d8:ec:5e:55:e0:8c [12657.450998] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 1/3) [12657.484159] wlp107s0: authenticated [12657.484967] wlp107s0: associate with d8:ec:5e:55:e0:8c (try 1/3) [12657.490626] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8c (capab=0x1511 status=0 aid=1) [12657.504286] wlp107s0: associated [12657.574900] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8c [12692.722614] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8c for new auth to d8:ec:5e:55:e0:8b [12692.781932] wlp107s0: authenticate with d8:ec:5e:55:e0:8b [12692.781982] wlp107s0: 80 MHz not supported, disabling VHT [12692.793876] wlp107s0: send auth to d8:ec:5e:55:e0:8b (try 1/3) [12692.827939] wlp107s0: authenticated [12692.829551] wlp107s0: associate with d8:ec:5e:55:e0:8b (try 1/3) [12692.837533] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8b (capab=0x1431 status=0 aid=7) [12692.853342] wlp107s0: associated [12692.907037] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8b [12734.003210] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8b for new auth to d8:ec:5e:55:e0:8c [12734.056162] wlp107s0: authenticate with d8:ec:5e:55:e0:8c [12734.064790] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 1/3) [12734.097977] wlp107s0: authenticated [12734.102103] wlp107s0: associate with d8:ec:5e:55:e0:8c (try 1/3) [12734.106330] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8c (capab=0x1511 status=0 aid=1) [12734.120660] wlp107s0: associated [12734.170977] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8c [12826.697379] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [12826.697482] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [12826.697510] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [12844.406303] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [12844.406369] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [12844.406403] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [12898.757722] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8c for new auth to d8:ec:5e:55:e0:8b [12898.855140] wlp107s0: authenticate with d8:ec:5e:55:e0:8b [12898.855192] wlp107s0: 80 MHz not supported, disabling VHT [12898.872877] wlp107s0: send auth to d8:ec:5e:55:e0:8b (try 1/3) [12898.905392] wlp107s0: authenticated [12898.908598] wlp107s0: associate with d8:ec:5e:55:e0:8b (try 1/3) [12898.917236] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8b (capab=0x1431 status=0 aid=7) [12898.933024] wlp107s0: associated [12898.940462] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8b [12904.675650] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [12904.675756] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [12904.675800] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [12920.556341] audit: type=1326 audit(1689291078.471:210): auid=1000 uid=1000 gid=1000 ses=3 subj=snap.slack.slack pid=4612 comm="slack" exe="/snap/slack/82/usr/lib/slack/slack" sig=0 arch=c000003e syscall=92 compat=0 ip=0x7f2190deb3b7 code=0x50000 [12937.651974] perf: interrupt took too long (3194 > 3167), lowering kernel.perf_event_max_sample_rate to 62500 [12999.232584] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8b for new auth to d8:ec:5e:55:e0:8c [12999.300087] wlp107s0: authenticate with d8:ec:5e:55:e0:8c [12999.309799] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 1/3) [12999.345882] wlp107s0: authenticated [12999.350065] wlp107s0: associate with d8:ec:5e:55:e0:8c (try 1/3) [12999.355028] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8c (capab=0x1511 status=0 aid=1) [12999.368007] wlp107s0: associated [12999.395816] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8c [13014.787182] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [13014.787258] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [13014.787331] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [13031.911048] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8c for new auth to d8:ec:5e:55:e0:8b [13031.966039] wlp107s0: authenticate with d8:ec:5e:55:e0:8b [13031.966055] wlp107s0: 80 MHz not supported, disabling VHT [13031.970695] wlp107s0: send auth to d8:ec:5e:55:e0:8b (try 1/3) [13032.003753] wlp107s0: authenticated [13032.006563] wlp107s0: associate with d8:ec:5e:55:e0:8b (try 1/3) [13032.014132] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8b (capab=0x1431 status=0 aid=7) [13032.028152] wlp107s0: associated [13032.058853] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8b [13037.977598] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [13037.977706] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [13037.977758] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [13051.027709] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8b for new auth to d8:ec:5e:55:e0:8c [13051.075804] wlp107s0: authenticate with d8:ec:5e:55:e0:8c [13051.086798] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 1/3) [13051.120491] iwlwifi 0000:6b:00.0: Unhandled alg: 0x3f0707 [13051.222878] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 2/3) [13051.224879] wlp107s0: authenticated [13051.230852] wlp107s0: associate with d8:ec:5e:55:e0:8c (try 1/3) [13051.234861] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8c (capab=0x1511 status=0 aid=1) [13051.243059] wlp107s0: associated [13051.307849] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8c [13124.420351] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8c for new auth to d8:ec:5e:55:e0:8b [13124.475450] wlp107s0: authenticate with d8:ec:5e:55:e0:8b [13124.475462] wlp107s0: 80 MHz not supported, disabling VHT [13124.480103] wlp107s0: send auth to d8:ec:5e:55:e0:8b (try 1/3) [13124.510639] wlp107s0: authenticated [13124.511883] wlp107s0: associate with d8:ec:5e:55:e0:8b (try 1/3) [13124.519447] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8b (capab=0x1431 status=0 aid=7) [13124.540610] wlp107s0: associated [13124.540652] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8b [13156.700953] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8b for new auth to d8:ec:5e:55:e0:8c [13156.759926] wlp107s0: authenticate with d8:ec:5e:55:e0:8c [13156.765817] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 1/3) [13156.798932] wlp107s0: authenticated [13156.800349] wlp107s0: associate with d8:ec:5e:55:e0:8c (try 1/3) [13156.805308] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8c (capab=0x1511 status=0 aid=1) [13156.817130] wlp107s0: associated [13156.883180] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8c [13201.442640] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8c for new auth to d8:ec:5e:55:e0:8b [13201.506755] wlp107s0: authenticate with d8:ec:5e:55:e0:8b [13201.506800] wlp107s0: 80 MHz not supported, disabling VHT [13201.517151] wlp107s0: send auth to d8:ec:5e:55:e0:8b (try 1/3) [13201.549722] wlp107s0: authenticated [13201.553080] wlp107s0: associate with d8:ec:5e:55:e0:8b (try 1/3) [13201.560865] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8b (capab=0x1031 status=0 aid=6) [13201.580173] wlp107s0: associated [13201.648536] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8b [13218.390801] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8b for new auth to d8:ec:5e:55:e0:8c [13218.447512] wlp107s0: authenticate with d8:ec:5e:55:e0:8c [13218.459826] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 1/3) [13218.494262] iwlwifi 0000:6b:00.0: Unhandled alg: 0x3f0707 [13218.597565] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 2/3) [13218.599712] wlp107s0: authenticated [13218.601311] wlp107s0: associate with d8:ec:5e:55:e0:8c (try 1/3) [13218.607331] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8c (capab=0x1511 status=0 aid=1) [13218.618391] wlp107s0: associated [13218.734016] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8c [13745.816528] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8c for new auth to d8:ec:5e:55:e0:8b [13745.876579] wlp107s0: authenticate with d8:ec:5e:55:e0:8b [13745.876625] wlp107s0: 80 MHz not supported, disabling VHT [13745.886898] wlp107s0: send auth to d8:ec:5e:55:e0:8b (try 1/3) [13745.924383] wlp107s0: authenticated [13745.926608] wlp107s0: associate with d8:ec:5e:55:e0:8b (try 1/3) [13745.934498] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8b (capab=0x1031 status=0 aid=6) [13745.952771] wlp107s0: associated [13746.108386] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8b [13904.624355] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8b for new auth to d8:ec:5e:55:e0:8c [13904.679433] wlp107s0: authenticate with d8:ec:5e:55:e0:8c [13904.707478] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 1/3) [13904.741562] wlp107s0: authenticated [13904.747249] wlp107s0: associate with d8:ec:5e:55:e0:8c (try 1/3) [13904.751825] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8c (capab=0x1511 status=0 aid=1) [13904.767888] wlp107s0: associated [13904.824182] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8c [13937.322321] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8c for new auth to d8:ec:5e:55:e0:8b [13937.391448] wlp107s0: authenticate with d8:ec:5e:55:e0:8b [13937.391493] wlp107s0: 80 MHz not supported, disabling VHT [13937.409475] wlp107s0: send auth to d8:ec:5e:55:e0:8b (try 1/3) [13937.446639] wlp107s0: authenticated [13937.453126] wlp107s0: associate with d8:ec:5e:55:e0:8b (try 1/3) [13937.465111] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8b (capab=0x1031 status=0 aid=6) [13937.485521] wlp107s0: associated [13937.496189] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8b [13947.870107] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8b for new auth to d8:ec:5e:55:e0:8c [13947.924896] wlp107s0: authenticate with d8:ec:5e:55:e0:8c [13947.955242] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 1/3) [13947.988326] iwlwifi 0000:6b:00.0: Unhandled alg: 0x3f0707 [13948.088736] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 2/3) [13948.090881] wlp107s0: authenticated [13948.092522] wlp107s0: associate with d8:ec:5e:55:e0:8c (try 1/3) [13948.097309] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8c (capab=0x1511 status=0 aid=1) [13948.108001] wlp107s0: associated [13948.139726] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8c [14048.324414] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8c for new auth to d8:ec:5e:55:e0:8b [14048.380932] wlp107s0: authenticate with d8:ec:5e:55:e0:8b [14048.380992] wlp107s0: 80 MHz not supported, disabling VHT [14048.386940] wlp107s0: send auth to d8:ec:5e:55:e0:8b (try 1/3) [14048.419017] wlp107s0: authenticated [14048.423284] wlp107s0: associate with d8:ec:5e:55:e0:8b (try 1/3) [14048.430812] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8b (capab=0x1031 status=0 aid=6) [14048.451744] wlp107s0: associated [14048.509324] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8b [14073.477134] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [14073.477207] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [14073.478223] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [14126.093026] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [14126.093059] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [14126.094046] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [14190.494518] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [14190.494618] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [14190.494648] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [14262.831509] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8b for new auth to d8:ec:5e:55:e0:8c [14262.897081] wlp107s0: authenticate with d8:ec:5e:55:e0:8c [14262.905687] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 1/3) [14262.939884] wlp107s0: authenticated [14262.942390] wlp107s0: associate with d8:ec:5e:55:e0:8c (try 1/3) [14262.946668] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8c (capab=0x1511 status=0 aid=1) [14262.960446] wlp107s0: associated [14263.023851] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8c [14351.852290] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8c for new auth to d8:ec:5e:55:e0:8b [14351.916138] wlp107s0: authenticate with d8:ec:5e:55:e0:8b [14351.916188] wlp107s0: 80 MHz not supported, disabling VHT [14351.922100] wlp107s0: send auth to d8:ec:5e:55:e0:8b (try 1/3) [14351.954724] wlp107s0: authenticated [14351.955097] wlp107s0: associate with d8:ec:5e:55:e0:8b (try 1/3) [14351.962784] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8b (capab=0x1031 status=0 aid=6) [14351.981045] wlp107s0: associated [14352.016297] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8b [14488.031579] audit: type=1400 audit(1689292646.057:211): apparmor="DENIED" operation="open" class="file" profile="snap.snap-store.ubuntu-software" name="/var/lib/snapd/hostfs/usr/share/discord/discord.desktop" pid=2108 comm="pool-org.gnome." requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [14488.070994] audit: type=1400 audit(1689292646.097:212): apparmor="DENIED" operation="open" class="file" profile="snap.snap-store.ubuntu-software" name="/var/lib/snapd/hostfs/usr/share/discord/discord.desktop" pid=2108 comm="pool-org.gnome." requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [14488.402254] audit: type=1326 audit(1689292646.425:213): auid=1000 uid=1000 gid=1000 ses=3 subj=snap.snap-store.ubuntu-software pid=2108 comm="pool-org.gnome." exe="/snap/snap-store/959/usr/bin/snap-store" sig=0 arch=c000003e syscall=93 compat=0 ip=0x7fd713138c4b code=0x50000 [14597.720992] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8b for new auth to d8:ec:5e:55:e0:8c [14597.788477] wlp107s0: authenticate with d8:ec:5e:55:e0:8c [14597.796702] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 1/3) [14597.829285] wlp107s0: authenticated [14597.830959] wlp107s0: associate with d8:ec:5e:55:e0:8c (try 1/3) [14597.835625] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8c (capab=0x1511 status=0 aid=1) [14597.848427] wlp107s0: associated [14597.876244] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8c [14622.563097] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8c for new auth to d8:ec:5e:55:e0:8b [14622.622894] wlp107s0: authenticate with d8:ec:5e:55:e0:8b [14622.622912] wlp107s0: 80 MHz not supported, disabling VHT [14622.629474] wlp107s0: send auth to d8:ec:5e:55:e0:8b (try 1/3) [14622.664754] iwlwifi 0000:6b:00.0: Unhandled alg: 0x3f0707 [14622.766155] wlp107s0: send auth to d8:ec:5e:55:e0:8b (try 2/3) [14622.772623] wlp107s0: authenticated [14622.778115] wlp107s0: associate with d8:ec:5e:55:e0:8b (try 1/3) [14622.785659] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8b (capab=0x1031 status=0 aid=6) [14622.793601] wlp107s0: associated [14622.867765] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8b [14699.037656] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [14699.037756] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [14699.037788] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [15109.517200] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [15109.517288] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [15109.517328] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [15280.655964] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [15280.656067] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [15280.656094] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [15353.933483] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [15353.933590] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [15353.933623] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [15523.428606] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [15523.428709] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [15523.428739] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [15776.264429] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [15776.264475] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [15776.265448] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [15884.668993] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8b for new auth to d8:ec:5e:55:e0:8c [15884.739257] wlp107s0: authenticate with d8:ec:5e:55:e0:8c [15884.745556] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 1/3) [15884.778780] wlp107s0: authenticated [15884.784369] wlp107s0: associate with d8:ec:5e:55:e0:8c (try 1/3) [15884.788347] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8c (capab=0x1511 status=0 aid=5) [15884.801192] wlp107s0: associated [15884.960517] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8c [15920.020173] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8c for new auth to d8:ec:5e:55:e0:8b [15920.103184] wlp107s0: authenticate with d8:ec:5e:55:e0:8b [15920.103216] wlp107s0: 80 MHz not supported, disabling VHT [15920.109432] wlp107s0: send auth to d8:ec:5e:55:e0:8b (try 1/3) [15920.140666] wlp107s0: authenticated [15920.142876] wlp107s0: associate with d8:ec:5e:55:e0:8b (try 1/3) [15920.150384] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8b (capab=0x1031 status=0 aid=5) [15920.164634] wlp107s0: associated [15920.188472] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8b [16250.610075] perf: interrupt took too long (4020 > 3992), lowering kernel.perf_event_max_sample_rate to 49750 [16763.060827] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [16763.060928] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [16763.060971] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [16771.476578] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8b for new auth to d8:ec:5e:55:e0:8c [16771.545548] wlp107s0: authenticate with d8:ec:5e:55:e0:8c [16771.551482] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 1/3) [16771.584169] wlp107s0: authenticated [16771.586270] wlp107s0: associate with d8:ec:5e:55:e0:8c (try 1/3) [16771.590224] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8c (capab=0x1511 status=0 aid=5) [16771.605176] wlp107s0: associated [16771.650882] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8c [17001.056110] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [17001.056220] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [17001.056247] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [17023.723122] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [17023.723219] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [17840.491176] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [17840.491279] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [17840.491311] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [18200.550612] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [18200.550710] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [18200.550741] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [18357.182821] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [18357.182926] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [18357.182965] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [18478.268287] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [18478.268371] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [18478.269307] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [18657.743450] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [18657.743477] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [18657.744470] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [18730.620803] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [18730.620897] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [18730.620942] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [18759.240867] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [18759.240971] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [18759.240999] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [18875.205370] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [18875.205473] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [18875.205506] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [19041.531306] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [19041.531413] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [19041.531488] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [19055.579556] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [19055.579624] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [19055.580562] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [19089.478974] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [19089.479044] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [19089.479921] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [19126.323068] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [19126.323209] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [19126.323282] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [19150.431740] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [19150.431821] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [19150.432824] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [19301.894163] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [19301.894259] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [19301.894288] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [19430.637784] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [19430.637889] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [19430.637914] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [19564.054077] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [19564.054174] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [19564.054208] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [19618.946216] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [19618.946317] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [19618.946346] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [19867.630450] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [19867.630555] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [19867.630585] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [20399.264425] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [20399.264527] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [20399.264586] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [20412.042518] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [20412.042548] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [20412.043513] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [20423.809500] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [20423.809603] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [20521.046365] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [20521.046474] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [20521.046507] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [20573.325953] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [20573.326057] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [20573.326089] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [20736.332293] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [20736.332371] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [20736.333314] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [21237.384079] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [21237.385080] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [21237.385187] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [21237.385223] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [21321.351752] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [21321.351842] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [21321.351876] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [21434.510910] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [21434.511016] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [21434.511044] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [21478.838978] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [21478.839079] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [21478.839112] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [21611.531834] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [21611.532004] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [21611.532055] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [21666.159411] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [21666.159510] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [21666.159562] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [21688.549096] audit: type=1400 audit(1689299846.542:214): apparmor="DENIED" operation="open" class="file" profile="snap.snap-store.ubuntu-software" name="/var/lib/snapd/hostfs/usr/share/discord/discord.desktop" pid=2108 comm="pool-org.gnome." requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [21688.594414] audit: type=1400 audit(1689299846.586:215): apparmor="DENIED" operation="open" class="file" profile="snap.snap-store.ubuntu-software" name="/var/lib/snapd/hostfs/usr/share/discord/discord.desktop" pid=2108 comm="pool-org.gnome." requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [21688.940126] audit: type=1326 audit(1689299846.930:216): auid=1000 uid=1000 gid=1000 ses=3 subj=snap.snap-store.ubuntu-software pid=2108 comm="pool-org.gnome." exe="/snap/snap-store/959/usr/bin/snap-store" sig=0 arch=c000003e syscall=93 compat=0 ip=0x7fd713138c4b code=0x50000 [21851.881849] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [21851.881945] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [21851.881979] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [21876.600848] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [21876.600953] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [21995.701923] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [21995.702013] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [22250.028789] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [22250.028890] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [22250.028930] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [22456.664181] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [22456.664207] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [22456.665199] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [22701.540401] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8c for new auth to d8:ec:5e:55:e0:8b [22701.609561] wlp107s0: authenticate with d8:ec:5e:55:e0:8b [22701.609575] wlp107s0: 80 MHz not supported, disabling VHT [22701.614404] wlp107s0: send auth to d8:ec:5e:55:e0:8b (try 1/3) [22701.645993] wlp107s0: authenticated [22701.648185] wlp107s0: associate with d8:ec:5e:55:e0:8b (try 1/3) [22701.656001] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8b (capab=0x1031 status=0 aid=5) [22701.672239] wlp107s0: associated [22701.706504] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8b [23032.808441] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8b for new auth to d8:ec:5e:55:e0:8c [23032.881424] wlp107s0: authenticate with d8:ec:5e:55:e0:8c [23032.889625] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 1/3) [23032.925715] wlp107s0: authenticated [23032.927343] wlp107s0: associate with d8:ec:5e:55:e0:8c (try 1/3) [23032.931861] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8c (capab=0x1511 status=0 aid=1) [23032.944705] wlp107s0: associated [23032.975888] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8c [23098.568154] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8c for new auth to d8:ec:5e:55:e0:8b [23098.624540] wlp107s0: authenticate with d8:ec:5e:55:e0:8b [23098.624602] wlp107s0: 80 MHz not supported, disabling VHT [23098.631100] wlp107s0: send auth to d8:ec:5e:55:e0:8b (try 1/3) [23098.662990] wlp107s0: authenticated [23098.667167] wlp107s0: associate with d8:ec:5e:55:e0:8b (try 1/3) [23098.674665] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8b (capab=0x1031 status=0 aid=5) [23098.688975] wlp107s0: associated [23098.716502] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8b [23247.591572] perf: interrupt took too long (5074 > 5025), lowering kernel.perf_event_max_sample_rate to 39250 [23498.308096] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8b for new auth to d8:ec:5e:55:e0:8c [23498.370925] wlp107s0: authenticate with d8:ec:5e:55:e0:8c [23498.377662] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 1/3) [23498.411046] wlp107s0: authenticated [23498.415048] wlp107s0: associate with d8:ec:5e:55:e0:8c (try 1/3) [23498.418883] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8c (capab=0x1511 status=0 aid=1) [23498.432386] wlp107s0: associated [23498.488079] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8c [23531.316172] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8c for new auth to d8:ec:5e:55:e0:8b [23531.383038] wlp107s0: authenticate with d8:ec:5e:55:e0:8b [23531.383052] wlp107s0: 80 MHz not supported, disabling VHT [23531.386980] wlp107s0: send auth to d8:ec:5e:55:e0:8b (try 1/3) [23531.418024] wlp107s0: authenticated [23531.418985] wlp107s0: associate with d8:ec:5e:55:e0:8b (try 1/3) [23531.426558] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8b (capab=0x1031 status=0 aid=5) [23531.445061] wlp107s0: associated [23531.464641] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8b [23538.461097] wlp107s0: disconnect from AP d8:ec:5e:55:e0:8b for new auth to d8:ec:5e:55:e0:8c [23538.516943] wlp107s0: authenticate with d8:ec:5e:55:e0:8c [23538.526602] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 1/3) [23538.559501] iwlwifi 0000:6b:00.0: Unhandled alg: 0x3f0707 [23538.659080] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 2/3) [23538.661092] wlp107s0: authenticated [23538.662993] wlp107s0: associate with d8:ec:5e:55:e0:8c (try 1/3) [23538.667215] wlp107s0: RX ReassocResp from d8:ec:5e:55:e0:8c (capab=0x1511 status=0 aid=1) [23538.674534] wlp107s0: associated [23538.729269] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8c [24397.693132] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [24397.693195] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [24397.694092] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [24405.469561] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [24405.469621] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [24405.472532] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [24937.149403] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [24937.149502] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [24937.149535] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [25287.965276] audit: type=1400 audit(1689303445.959:217): apparmor="DENIED" operation="open" class="file" profile="snap.snap-store.ubuntu-software" name="/var/lib/snapd/hostfs/usr/share/discord/discord.desktop" pid=2108 comm="pool-org.gnome." requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [25287.995060] audit: type=1400 audit(1689303445.987:218): apparmor="DENIED" operation="open" class="file" profile="snap.snap-store.ubuntu-software" name="/var/lib/snapd/hostfs/usr/share/discord/discord.desktop" pid=2108 comm="pool-org.gnome." requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [25288.326218] audit: type=1326 audit(1689303446.319:219): auid=1000 uid=1000 gid=1000 ses=3 subj=snap.snap-store.ubuntu-software pid=2108 comm="pool-org.gnome." exe="/snap/snap-store/959/usr/bin/snap-store" sig=0 arch=c000003e syscall=93 compat=0 ip=0x7fd713138c4b code=0x50000 [25467.593250] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [25467.593295] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [25467.594273] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [25606.802269] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [25606.802357] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [25606.803285] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [25654.162272] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [25654.162371] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [25654.162415] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [25688.701240] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [25688.701275] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [25688.702256] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [25763.842323] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [25763.842420] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [25763.842455] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [26163.353465] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [26163.353563] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [26163.353590] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [29044.216391] audit: type=1400 audit(1689307202.220:220): apparmor="DENIED" operation="capable" class="cap" profile="/usr/sbin/cupsd" pid=39370 comm="cupsd" capability=12 capname="net_admin" [29249.436298] perf: interrupt took too long (6352 > 6342), lowering kernel.perf_event_max_sample_rate to 31250 [30345.845039] wlp107s0: deauthenticating from d8:ec:5e:55:e0:8c by local choice (Reason: 3=DEAUTH_LEAVING) [30347.353123] PM: suspend entry (s2idle) [30347.360751] Filesystems sync: 0.007 seconds [30347.642257] Freezing user space processes [30347.653538] Freezing user space processes completed (elapsed 0.011 seconds) [30347.653553] OOM killer disabled. [30347.653557] Freezing remaining freezable tasks [30347.655077] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [30347.655092] printk: Suspending console(s) (use no_console_suspend to debug) [30348.163921] ACPI: EC: interrupt blocked [30348.166964] intel_pch_thermal 0000:00:14.2: CPU-PCH is cool [39C] [44456.715919] ACPI: EC: interrupt unblocked [44456.761708] nvme nvme0: Shutdown timeout set to 8 seconds [44456.771017] nvme nvme0: 8/0/0 default/read/poll queues [44456.903638] HDMI HDA Codec ehdaudio0D2: hdac_hdmi_present_sense: disconnect for pin:port 5:0 [44456.903645] HDMI HDA Codec ehdaudio0D2: hdac_hdmi_present_sense: disconnect for pin:port 6:0 [44456.903648] HDMI HDA Codec ehdaudio0D2: hdac_hdmi_present_sense: disconnect for pin:port 7:0 [44457.060384] OOM killer enabled. [44457.060389] Restarting tasks ... [44457.060495] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915]) [44457.067646] done. [44457.067670] random: crng reseeded on system resumption [44457.069276] thermal thermal_zone6: failed to read out thermal zone (-61) [44457.100034] PM: suspend exit [44457.285436] iwlwifi 0000:6b:00.0: WFPM_UMAC_PD_NOTIFICATION: 0x1f [44457.285479] iwlwifi 0000:6b:00.0: WFPM_LMAC2_PD_NOTIFICATION: 0x1f [44457.285515] iwlwifi 0000:6b:00.0: WFPM_AUTH_KEY_0: 0x90 [44457.285548] iwlwifi 0000:6b:00.0: CNVI_SCU_SEQ_DATA_DW9: 0x0 [44461.251085] wlp107s0: authenticate with d8:ec:5e:55:e0:8c [44461.262312] wlp107s0: send auth to d8:ec:5e:55:e0:8c (try 1/3) [44461.287690] wlp107s0: authenticated [44461.290665] wlp107s0: associate with d8:ec:5e:55:e0:8c (try 1/3) [44461.294415] wlp107s0: RX AssocResp from d8:ec:5e:55:e0:8c (capab=0x1511 status=0 aid=9) [44461.311188] wlp107s0: associated [44461.340299] wlp107s0: Limiting TX power to 30 (30 - 0) dBm as advertised by d8:ec:5e:55:e0:8c [44461.387902] IPv6: ADDRCONF(NETDEV_CHANGE): wlp107s0: link becomes ready [44604.213310] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [44604.213368] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000 [44604.213417] snd_soc_skl 0000:00:1f.3: MCPS Budget Violation: 9b050000