[ 0.000000] microcode: microcode updated early to revision 0x2e, date = 2018-04-10 [ 0.000000] Linux version 4.15.0-36-generic (buildd@lgw01-amd64-031) (gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)) #39-Ubuntu SMP Mon Sep 24 16:19:09 UTC 2018 (Ubuntu 4.15.0-36.39-generic 4.15.18) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-36-generic root=UUID=1030fdb0-f3d8-4f87-b803-39c90775b155 ro quiet splash vt.handoff=1 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dd266fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dd267000-0x00000000dd967fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dd968000-0x00000000dd977fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000dd978000-0x00000000dda9afff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000dda9b000-0x00000000de7fbfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000de7fc000-0x00000000de7fcfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000de7fd000-0x00000000de83ffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000de840000-0x00000000dec73fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dec74000-0x00000000deff3fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000deff4000-0x00000000deffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021effffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: System manufacturer System Product Name/P8Z77-V LX, BIOS 2501 07/21/2014 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x21f000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-E7FFF uncachable [ 0.000000] E8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask E00000000 write-back [ 0.000000] 1 base 200000000 mask FF0000000 write-back [ 0.000000] 2 base 210000000 mask FF8000000 write-back [ 0.000000] 3 base 218000000 mask FFC000000 write-back [ 0.000000] 4 base 21C000000 mask FFE000000 write-back [ 0.000000] 5 base 21E000000 mask FFF000000 write-back [ 0.000000] 6 base 0E0000000 mask FE0000000 uncachable [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] total RAM covered: 8176M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 32M num_reg: 6 lose cover RAM: 0G [ 0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xdf000 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fd8a0-0x000fd8af] mapped at [ (ptrval)] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ (ptrval)] 97000 size 24576 [ 0.000000] BRK [0x213f3f000, 0x213f3ffff] PGTABLE [ 0.000000] BRK [0x213f40000, 0x213f40fff] PGTABLE [ 0.000000] BRK [0x213f41000, 0x213f41fff] PGTABLE [ 0.000000] BRK [0x213f42000, 0x213f42fff] PGTABLE [ 0.000000] BRK [0x213f43000, 0x213f43fff] PGTABLE [ 0.000000] BRK [0x213f44000, 0x213f44fff] PGTABLE [ 0.000000] BRK [0x213f45000, 0x213f45fff] PGTABLE [ 0.000000] BRK [0x213f46000, 0x213f46fff] PGTABLE [ 0.000000] BRK [0x213f47000, 0x213f47fff] PGTABLE [ 0.000000] BRK [0x213f48000, 0x213f48fff] PGTABLE [ 0.000000] BRK [0x213f49000, 0x213f49fff] PGTABLE [ 0.000000] BRK [0x213f4a000, 0x213f4afff] PGTABLE [ 0.000000] RAMDISK: [mem 0x31607000-0x34afafff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 0x00000000DD96B078 00006C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x00000000DD9760C0 00010C (v05 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 0x00000000DD96B180 00AF3B (v02 ALASKA A M I 00000022 INTL 20051117) [ 0.000000] ACPI: FACS 0x00000000DDA99080 000040 [ 0.000000] ACPI: APIC 0x00000000DD9761D0 000072 (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 0x00000000DD976248 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: MCFG 0x00000000DD976290 00003C (v01 ALASKA A M I 01072009 MSFT 00000097) [ 0.000000] ACPI: HPET 0x00000000DD9762D0 000038 (v01 ALASKA A M I 01072009 AMI. 00000005) [ 0.000000] ACPI: SSDT 0x00000000DD976308 00036D (v01 SataRe SataTabl 00001000 INTL 20091112) [ 0.000000] ACPI: BGRT 0x00000000DD977B18 000038 (v00 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: SSDT 0x00000000DD9766D0 0009AA (v01 PmRef Cpu0Ist 00003000 INTL 20051117) [ 0.000000] ACPI: SSDT 0x00000000DD977080 000A92 (v01 PmRef CpuPm 00003000 INTL 20051117) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021effffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x21efd0000-0x21effafff] [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000021effffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000dd266fff] [ 0.000000] node 0: [mem 0x00000000de7fc000-0x00000000de7fcfff] [ 0.000000] node 0: [mem 0x00000000de840000-0x00000000dec73fff] [ 0.000000] node 0: [mem 0x00000000deff4000-0x00000000deffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000021effffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000021effffff] [ 0.000000] On node 0 totalpages: 2082372 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14107 pages used for memmap [ 0.000000] DMA32 zone: 902824 pages, LIFO batch:31 [ 0.000000] Normal zone: 18368 pages used for memmap [ 0.000000] Normal zone: 1175552 pages, LIFO batch:31 [ 0.000000] Reserved but unavailable: 100 pages [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdd267000-0xdd967fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdd968000-0xdd977fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdd978000-0xdda9afff] [ 0.000000] PM: Registered nosave memory: [mem 0xdda9b000-0xde7fbfff] [ 0.000000] PM: Registered nosave memory: [mem 0xde7fd000-0xde83ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdec74000-0xdeff3fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdf000000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.000000] e820: [mem 0xdf000000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] random: get_random_bytes called from start_kernel+0x99/0x4fd with crng_init=0 [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u524288 [ 0.000000] pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2049812 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-36-generic root=UUID=1030fdb0-f3d8-4f87-b803-39c90775b155 ro quiet splash vt.handoff=1 [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 8049220K/8329488K available (12300K kernel code, 2472K rwdata, 4248K rodata, 2408K init, 2416K bss, 280268K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Kernel/User page tables isolation: enabled [ 0.000000] ftrace: allocating 39168 entries in 154 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16 [ 0.000000] vt handoff: transparent VT on vt#1 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] ACPI: Core revision 20170831 [ 0.000000] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] APIC: Switch to symmetric I/O mode setup [ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.020000] tsc: Fast TSC calibration using PIT [ 0.024000] tsc: Detected 3317.136 MHz processor [ 0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6634.27 BogoMIPS (lpj=13268544) [ 0.024000] pid_max: default: 32768 minimum: 301 [ 0.024000] Security Framework initialized [ 0.024000] Yama: becoming mindful. [ 0.024000] AppArmor: AppArmor initialized [ 0.028197] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.028737] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.028763] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.028780] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.028943] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.028944] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.028948] mce: CPU supports 9 MCE banks [ 0.028954] CPU0: Thermal monitoring enabled (TM1) [ 0.028962] process: using mwait in idle threads [ 0.028964] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 0.028964] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.028966] Spectre V2 : Mitigation: Full generic retpoline [ 0.028966] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.028967] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier [ 0.028967] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.028968] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.029048] Freeing SMP alternatives memory: 36K [ 0.032056] TSC deadline timer enabled [ 0.032058] smpboot: CPU0: Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz (family: 0x6, model: 0x2a, stepping: 0x7) [ 0.032113] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.032131] ... version: 3 [ 0.032131] ... bit width: 48 [ 0.032132] ... generic registers: 8 [ 0.032132] ... value mask: 0000ffffffffffff [ 0.032133] ... max period: 00007fffffffffff [ 0.032133] ... fixed-purpose events: 3 [ 0.032134] ... event mask: 00000007000000ff [ 0.032161] Hierarchical SRCU implementation. [ 0.032840] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.032852] smp: Bringing up secondary CPUs ... [ 0.032914] x86: Booting SMP configuration: [ 0.032915] .... node #0, CPUs: #1 #2 #3 [ 0.040052] smp: Brought up 1 node, 4 CPUs [ 0.040052] smpboot: Max logical packages: 1 [ 0.040052] smpboot: Total of 4 processors activated (26537.08 BogoMIPS) [ 0.042286] devtmpfs: initialized [ 0.042286] x86/mm: Memory block size: 128MB [ 0.042286] evm: security.selinux [ 0.042286] evm: security.SMACK64 [ 0.042286] evm: security.SMACK64EXEC [ 0.042286] evm: security.SMACK64TRANSMUTE [ 0.042286] evm: security.SMACK64MMAP [ 0.042286] evm: security.apparmor [ 0.042286] evm: security.ima [ 0.042286] evm: security.capability [ 0.042286] PM: Registering ACPI NVS region [mem 0xdd978000-0xdda9afff] (1191936 bytes) [ 0.042286] PM: Registering ACPI NVS region [mem 0xde7fd000-0xde83ffff] (274432 bytes) [ 0.042286] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.042286] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.042286] pinctrl core: initialized pinctrl subsystem [ 0.042286] RTC time: 13:17:13, date: 10/09/18 [ 0.042286] NET: Registered protocol family 16 [ 0.042286] audit: initializing netlink subsys (disabled) [ 0.042286] audit: type=2000 audit(1539091033.040:1): state=initialized audit_enabled=0 res=1 [ 0.042286] cpuidle: using governor ladder [ 0.042286] cpuidle: using governor menu [ 0.042286] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.042286] ACPI: bus type PCI registered [ 0.042286] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.042286] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.042286] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.042286] PCI: Using configuration type 1 for base access [ 0.042286] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off [ 0.044808] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.044810] ACPI: Added _OSI(Module Device) [ 0.044810] ACPI: Added _OSI(Processor Device) [ 0.044810] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.044810] ACPI: Added _OSI(Processor Aggregator Device) [ 0.044810] ACPI: Added _OSI(Linux-Dell-Video) [ 0.044810] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.044810] ACPI: Executed 1 blocks of module-level executable AML code [ 0.049841] ACPI: Dynamic OEM Table Load: [ 0.049841] ACPI: SSDT 0xFFFF9B5595364000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.049841] ACPI: Dynamic OEM Table Load: [ 0.049841] ACPI: SSDT 0xFFFF9B5594DD5000 000303 (v01 PmRef ApIst 00003000 INTL 20051117) [ 0.049841] ACPI: Dynamic OEM Table Load: [ 0.049841] ACPI: SSDT 0xFFFF9B5594D04200 000119 (v01 PmRef ApCst 00003000 INTL 20051117) [ 0.052263] ACPI: Interpreter enabled [ 0.052280] ACPI: (supports S0 S3 S4 S5) [ 0.052281] ACPI: Using IOAPIC for interrupt routing [ 0.052306] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.052582] ACPI: Enabled 10 GPEs in block 00 to 3F [ 0.060206] ACPI: Power Resource [FN00] (off) [ 0.060287] ACPI: Power Resource [FN01] (off) [ 0.060370] ACPI: Power Resource [FN02] (off) [ 0.060451] ACPI: Power Resource [FN03] (off) [ 0.060531] ACPI: Power Resource [FN04] (off) [ 0.061183] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.061187] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.061476] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME] [ 0.061661] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability] [ 0.061662] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.062198] PCI host bridge to bus 0000:00 [ 0.062201] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.062202] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.062203] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.062204] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] [ 0.062205] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 0.062206] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 0.062207] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.062208] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] [ 0.062209] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] [ 0.062210] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff window] [ 0.062212] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.062218] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000 [ 0.062308] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400 [ 0.062336] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.062436] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330 [ 0.062458] pci 0000:00:14.0: reg 0x10: [mem 0xf6200000-0xf620ffff 64bit] [ 0.062524] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.062603] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000 [ 0.062626] pci 0000:00:16.0: reg 0x10: [mem 0xf6216000-0xf621600f 64bit] [ 0.062696] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.062782] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320 [ 0.062803] pci 0000:00:1a.0: reg 0x10: [mem 0xf6214000-0xf62143ff] [ 0.062883] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.062968] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400 [ 0.063107] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.063204] pci 0000:00:1c.4: [8086:1e18] type 01 class 0x060400 [ 0.063284] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.063368] pci 0000:00:1c.5: [8086:244e] type 01 class 0x060401 [ 0.063447] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.063531] pci 0000:00:1c.6: [8086:1e1c] type 01 class 0x060400 [ 0.063610] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold [ 0.063696] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320 [ 0.063717] pci 0000:00:1d.0: reg 0x10: [mem 0xf6213000-0xf62133ff] [ 0.063796] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.063878] pci 0000:00:1f.0: [8086:1e44] type 00 class 0x060100 [ 0.064055] pci 0000:00:1f.2: [8086:1e02] type 00 class 0x010601 [ 0.064072] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077] [ 0.064078] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063] [ 0.064085] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057] [ 0.064091] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043] [ 0.064098] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f] [ 0.064105] pci 0000:00:1f.2: reg 0x24: [mem 0xf6212000-0xf62127ff] [ 0.064142] pci 0000:00:1f.2: PME# supported from D3hot [ 0.064216] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500 [ 0.064233] pci 0000:00:1f.3: reg 0x10: [mem 0xf6211000-0xf62110ff 64bit] [ 0.064252] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f] [ 0.064375] pci 0000:01:00.0: [10de:1184] type 00 class 0x030000 [ 0.064391] pci 0000:01:00.0: reg 0x10: [mem 0xf5000000-0xf5ffffff] [ 0.064400] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xe7ffffff 64bit pref] [ 0.064409] pci 0000:01:00.0: reg 0x1c: [mem 0xe8000000-0xe9ffffff 64bit pref] [ 0.064415] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f] [ 0.064422] pci 0000:01:00.0: reg 0x30: [mem 0xf6000000-0xf607ffff pref] [ 0.064426] pci 0000:01:00.0: enabling Extended Tags [ 0.064507] pci 0000:01:00.1: [10de:0e0a] type 00 class 0x040300 [ 0.064521] pci 0000:01:00.1: reg 0x10: [mem 0xf6080000-0xf6083fff] [ 0.064555] pci 0000:01:00.1: enabling Extended Tags [ 0.076014] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.076016] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.076018] pci 0000:00:01.0: bridge window [mem 0xf5000000-0xf60fffff] [ 0.076020] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe9ffffff 64bit pref] [ 0.076084] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.076161] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000 [ 0.076196] pci 0000:03:00.0: reg 0x10: [io 0xd000-0xd0ff] [ 0.076228] pci 0000:03:00.0: reg 0x18: [mem 0xea104000-0xea104fff 64bit pref] [ 0.076249] pci 0000:03:00.0: reg 0x20: [mem 0xea100000-0xea103fff 64bit pref] [ 0.076369] pci 0000:03:00.0: supports D1 D2 [ 0.076370] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.088020] pci 0000:00:1c.4: PCI bridge to [bus 03] [ 0.088023] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff] [ 0.088030] pci 0000:00:1c.4: bridge window [mem 0xea100000-0xea1fffff 64bit pref] [ 0.088090] pci 0000:04:00.0: [1b21:1080] type 01 class 0x060401 [ 0.088244] pci 0000:00:1c.5: PCI bridge to [bus 04-05] (subtractive decode) [ 0.088247] pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff] [ 0.088250] pci 0000:00:1c.5: bridge window [mem 0xf0000000-0xf41fffff] [ 0.088256] pci 0000:00:1c.5: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.088257] pci 0000:00:1c.5: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.088258] pci 0000:00:1c.5: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.088259] pci 0000:00:1c.5: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode) [ 0.088260] pci 0000:00:1c.5: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode) [ 0.088261] pci 0000:00:1c.5: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode) [ 0.088262] pci 0000:00:1c.5: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode) [ 0.088263] pci 0000:00:1c.5: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode) [ 0.088264] pci 0000:00:1c.5: bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode) [ 0.088265] pci 0000:00:1c.5: bridge window [mem 0xe0000000-0xfeafffff window] (subtractive decode) [ 0.088319] pci 0000:05:01.0: [1102:0005] type 00 class 0x040100 [ 0.088358] pci 0000:05:01.0: reg 0x10: [io 0xc000-0xc01f] [ 0.088384] pci 0000:05:01.0: reg 0x14: [mem 0xf4000000-0xf41fffff 64bit] [ 0.088409] pci 0000:05:01.0: reg 0x1c: [mem 0xf0000000-0xf3ffffff 64bit] [ 0.088517] pci 0000:05:01.0: supports D1 D2 [ 0.088610] pci 0000:04:00.0: PCI bridge to [bus 05] (subtractive decode) [ 0.088618] pci 0000:04:00.0: bridge window [io 0xc000-0xcfff] [ 0.088623] pci 0000:04:00.0: bridge window [mem 0xf0000000-0xf41fffff] [ 0.088632] pci 0000:04:00.0: bridge window [io 0xc000-0xcfff] (subtractive decode) [ 0.088633] pci 0000:04:00.0: bridge window [mem 0xf0000000-0xf41fffff] (subtractive decode) [ 0.088635] pci 0000:04:00.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.088636] pci 0000:04:00.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.088637] pci 0000:04:00.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.088638] pci 0000:04:00.0: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode) [ 0.088639] pci 0000:04:00.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode) [ 0.088640] pci 0000:04:00.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode) [ 0.088641] pci 0000:04:00.0: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode) [ 0.088642] pci 0000:04:00.0: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode) [ 0.088643] pci 0000:04:00.0: bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode) [ 0.088644] pci 0000:04:00.0: bridge window [mem 0xe0000000-0xfeafffff window] (subtractive decode) [ 0.088716] pci 0000:06:00.0: [1106:3483] type 00 class 0x0c0330 [ 0.088748] pci 0000:06:00.0: reg 0x10: [mem 0xf6100000-0xf6100fff 64bit] [ 0.088872] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.100017] pci 0000:00:1c.6: PCI bridge to [bus 06] [ 0.100022] pci 0000:00:1c.6: bridge window [mem 0xf6100000-0xf61fffff] [ 0.100556] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.100621] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.100683] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.100747] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15) [ 0.100809] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.100872] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 10 11 12 14 15) [ 0.100933] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.100995] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 *6 10 11 12 14 15) [ 0.101399] SCSI subsystem initialized [ 0.101409] libata version 3.00 loaded. [ 0.101409] pci 0000:01:00.0: vgaarb: setting as boot VGA device [ 0.101409] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.101409] pci 0000:01:00.0: vgaarb: bridge control possible [ 0.101409] vgaarb: loaded [ 0.101409] ACPI: bus type USB registered [ 0.101409] usbcore: registered new interface driver usbfs [ 0.101409] usbcore: registered new interface driver hub [ 0.101409] usbcore: registered new device driver usb [ 0.101409] EDAC MC: Ver: 3.0.0 [ 0.101409] PCI: Using ACPI for IRQ routing [ 0.101409] PCI: pci_cache_line_size set to 64 bytes [ 0.101409] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 0.101409] e820: reserve RAM buffer [mem 0xdd267000-0xdfffffff] [ 0.101409] e820: reserve RAM buffer [mem 0xde7fd000-0xdfffffff] [ 0.101409] e820: reserve RAM buffer [mem 0xdec74000-0xdfffffff] [ 0.101409] e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff] [ 0.101409] e820: reserve RAM buffer [mem 0x21f000000-0x21fffffff] [ 0.101409] NetLabel: Initializing [ 0.101409] NetLabel: domain hash size = 128 [ 0.101409] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.101409] NetLabel: unlabeled traffic allowed by default [ 0.101409] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.101409] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.104003] clocksource: Switched to clocksource hpet [ 0.112285] VFS: Disk quotas dquot_6.6.0 [ 0.112298] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.112376] AppArmor: AppArmor Filesystem Enabled [ 0.112400] pnp: PnP ACPI init [ 0.112516] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.112521] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.112600] system 00:01: [io 0x0680-0x069f] has been reserved [ 0.112602] system 00:01: [io 0x1000-0x100f] has been reserved [ 0.112603] system 00:01: [io 0xffff] has been reserved [ 0.112604] system 00:01: [io 0xffff] has been reserved [ 0.112606] system 00:01: [io 0x0400-0x0453] has been reserved [ 0.112607] system 00:01: [io 0x0458-0x047f] has been reserved [ 0.112608] system 00:01: [io 0x0500-0x057f] has been reserved [ 0.112609] system 00:01: [io 0x164e-0x164f] has been reserved [ 0.112613] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.112635] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.112683] system 00:03: [io 0x0454-0x0457] has been reserved [ 0.112686] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.112779] system 00:04: [io 0x0290-0x029f] has been reserved [ 0.112783] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.112834] system 00:05: [io 0x04d0-0x04d1] has been reserved [ 0.112837] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.113083] pnp 00:06: [dma 0 disabled] [ 0.113125] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.113346] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.113348] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.113349] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.113350] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.113352] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.113353] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.113354] system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.113356] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.113357] system 00:07: [mem 0xff000000-0xffffffff] has been reserved [ 0.113358] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.113360] system 00:07: [mem 0xea200000-0xea200fff] has been reserved [ 0.113363] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.113503] pnp: PnP ACPI: found 8 devices [ 0.119326] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.119378] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.119380] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.119383] pci 0000:00:01.0: bridge window [mem 0xf5000000-0xf60fffff] [ 0.119384] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe9ffffff 64bit pref] [ 0.119387] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.119403] pci 0000:00:1c.4: PCI bridge to [bus 03] [ 0.119406] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff] [ 0.119411] pci 0000:00:1c.4: bridge window [mem 0xea100000-0xea1fffff 64bit pref] [ 0.119417] pci 0000:04:00.0: PCI bridge to [bus 05] [ 0.119420] pci 0000:04:00.0: bridge window [io 0xc000-0xcfff] [ 0.119426] pci 0000:04:00.0: bridge window [mem 0xf0000000-0xf41fffff] [ 0.119439] pci 0000:00:1c.5: PCI bridge to [bus 04-05] [ 0.119441] pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff] [ 0.119445] pci 0000:00:1c.5: bridge window [mem 0xf0000000-0xf41fffff] [ 0.119452] pci 0000:00:1c.6: PCI bridge to [bus 06] [ 0.119456] pci 0000:00:1c.6: bridge window [mem 0xf6100000-0xf61fffff] [ 0.119464] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.119465] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.119466] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.119467] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window] [ 0.119468] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window] [ 0.119469] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window] [ 0.119470] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window] [ 0.119471] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window] [ 0.119473] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window] [ 0.119474] pci_bus 0000:00: resource 13 [mem 0xe0000000-0xfeafffff window] [ 0.119475] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.119476] pci_bus 0000:01: resource 1 [mem 0xf5000000-0xf60fffff] [ 0.119477] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xe9ffffff 64bit pref] [ 0.119478] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff] [ 0.119480] pci_bus 0000:03: resource 2 [mem 0xea100000-0xea1fffff 64bit pref] [ 0.119481] pci_bus 0000:04: resource 0 [io 0xc000-0xcfff] [ 0.119482] pci_bus 0000:04: resource 1 [mem 0xf0000000-0xf41fffff] [ 0.119483] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7 window] [ 0.119484] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff window] [ 0.119485] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.119486] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000d3fff window] [ 0.119487] pci_bus 0000:04: resource 8 [mem 0x000d4000-0x000d7fff window] [ 0.119488] pci_bus 0000:04: resource 9 [mem 0x000d8000-0x000dbfff window] [ 0.119489] pci_bus 0000:04: resource 10 [mem 0x000dc000-0x000dffff window] [ 0.119490] pci_bus 0000:04: resource 11 [mem 0x000e0000-0x000e3fff window] [ 0.119492] pci_bus 0000:04: resource 12 [mem 0x000e4000-0x000e7fff window] [ 0.119493] pci_bus 0000:04: resource 13 [mem 0xe0000000-0xfeafffff window] [ 0.119494] pci_bus 0000:05: resource 0 [io 0xc000-0xcfff] [ 0.119495] pci_bus 0000:05: resource 1 [mem 0xf0000000-0xf41fffff] [ 0.119496] pci_bus 0000:05: resource 4 [io 0xc000-0xcfff] [ 0.119497] pci_bus 0000:05: resource 5 [mem 0xf0000000-0xf41fffff] [ 0.119498] pci_bus 0000:05: resource 6 [io 0x0000-0x0cf7 window] [ 0.119499] pci_bus 0000:05: resource 7 [io 0x0d00-0xffff window] [ 0.119500] pci_bus 0000:05: resource 8 [mem 0x000a0000-0x000bffff window] [ 0.119501] pci_bus 0000:05: resource 9 [mem 0x000d0000-0x000d3fff window] [ 0.119502] pci_bus 0000:05: resource 10 [mem 0x000d4000-0x000d7fff window] [ 0.119504] pci_bus 0000:05: resource 11 [mem 0x000d8000-0x000dbfff window] [ 0.119505] pci_bus 0000:05: resource 12 [mem 0x000dc000-0x000dffff window] [ 0.119506] pci_bus 0000:05: resource 13 [mem 0x000e0000-0x000e3fff window] [ 0.119507] pci_bus 0000:05: resource 14 [mem 0x000e4000-0x000e7fff window] [ 0.119508] pci_bus 0000:05: resource 15 [mem 0xe0000000-0xfeafffff window] [ 0.119509] pci_bus 0000:06: resource 1 [mem 0xf6100000-0xf61fffff] [ 0.119595] NET: Registered protocol family 2 [ 0.119739] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.119831] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.119946] TCP: Hash tables configured (established 65536 bind 65536) [ 0.119972] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.119992] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.120040] NET: Registered protocol family 1 [ 0.168092] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.168102] PCI: CLS mismatch (64 != 32), using 64 bytes [ 0.168273] Unpacking initramfs... [ 0.761400] Freeing initrd memory: 54224K [ 0.761416] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.761418] software IO TLB [mem 0xd9267000-0xdd267000] (64MB) mapped at [ (ptrval)- (ptrval)] [ 0.761630] Scanning for low memory corruption every 60 seconds [ 0.762116] Initialise system trusted keyrings [ 0.762122] Key type blacklist registered [ 0.762147] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 0.762965] zbud: loaded [ 0.763306] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.763395] fuse init (API version 7.26) [ 0.764356] Key type asymmetric registered [ 0.764357] Asymmetric key parser 'x509' registered [ 0.764376] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 0.764400] io scheduler noop registered [ 0.764401] io scheduler deadline registered [ 0.764430] io scheduler cfq registered (default) [ 0.764984] vesafb: mode is 640x480x32, linelength=2560, pages=0 [ 0.764985] vesafb: scrolling: redraw [ 0.764986] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.764992] vesafb: framebuffer at 0xe9000000, mapped to 0x (ptrval), using 1216k, total 1216k [ 0.765055] Console: switching to colour frame buffer device 80x30 [ 0.765063] fb0: VESA VGA frame buffer device [ 0.765074] intel_idle: MWAIT substates: 0x1120 [ 0.765074] intel_idle: v0.4.1 model 0x2A [ 0.765165] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.765238] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.765256] ACPI: Power Button [PWRB] [ 0.765283] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.765296] ACPI: Power Button [PWRF] [ 0.765960] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 0.766109] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.766110] ACPI: Thermal Zone [TZ00] (28 C) [ 0.766374] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.766375] ACPI: Thermal Zone [TZ01] (30 C) [ 0.766472] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.786958] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.788538] Linux agpgart interface v0.103 [ 0.789726] loop: module loaded [ 0.789838] libphy: Fixed MDIO Bus: probed [ 0.789839] tun: Universal TUN/TAP device driver, 1.6 [ 0.789862] PPP generic driver version 2.4.2 [ 0.789890] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.789895] ehci-pci: EHCI PCI platform driver [ 0.789992] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.789996] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.790006] ehci-pci 0000:00:1a.0: debug port 2 [ 0.793910] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 0.793920] ehci-pci 0000:00:1a.0: irq 23, io mem 0xf6214000 [ 0.808043] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.808101] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.808102] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.808103] usb usb1: Product: EHCI Host Controller [ 0.808104] usb usb1: Manufacturer: Linux 4.15.0-36-generic ehci_hcd [ 0.808105] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.808271] hub 1-0:1.0: USB hub found [ 0.808277] hub 1-0:1.0: 2 ports detected [ 0.808471] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.808475] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.808486] ehci-pci 0000:00:1d.0: debug port 2 [ 0.812374] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 0.812377] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf6213000 [ 0.828041] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.828097] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.828099] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.828100] usb usb2: Product: EHCI Host Controller [ 0.828101] usb usb2: Manufacturer: Linux 4.15.0-36-generic ehci_hcd [ 0.828102] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.828241] hub 2-0:1.0: USB hub found [ 0.828246] hub 2-0:1.0: 2 ports detected [ 0.828362] ehci-platform: EHCI generic platform driver [ 0.828369] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.828371] ohci-pci: OHCI PCI platform driver [ 0.828377] ohci-platform: OHCI generic platform driver [ 0.828381] uhci_hcd: USB Universal Host Controller Interface driver [ 0.828476] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.828481] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.829554] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x0000b930 [ 0.829558] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 0.829663] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.829665] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.829666] usb usb3: Product: xHCI Host Controller [ 0.829667] usb usb3: Manufacturer: Linux 4.15.0-36-generic xhci-hcd [ 0.829668] usb usb3: SerialNumber: 0000:00:14.0 [ 0.829802] hub 3-0:1.0: USB hub found [ 0.829811] hub 3-0:1.0: 4 ports detected [ 0.830136] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.830139] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.830142] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.830165] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.830167] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.830168] usb usb4: Product: xHCI Host Controller [ 0.830169] usb usb4: Manufacturer: Linux 4.15.0-36-generic xhci-hcd [ 0.830170] usb usb4: SerialNumber: 0000:00:14.0 [ 0.830306] hub 4-0:1.0: USB hub found [ 0.830315] hub 4-0:1.0: 4 ports detected [ 0.830709] xhci_hcd 0000:06:00.0: xHCI Host Controller [ 0.830713] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 5 [ 0.830945] xhci_hcd 0000:06:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x00000090 [ 0.831086] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.831088] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.831089] usb usb5: Product: xHCI Host Controller [ 0.831090] usb usb5: Manufacturer: Linux 4.15.0-36-generic xhci-hcd [ 0.831091] usb usb5: SerialNumber: 0000:06:00.0 [ 0.831221] hub 5-0:1.0: USB hub found [ 0.831229] hub 5-0:1.0: 1 port detected [ 0.831285] xhci_hcd 0000:06:00.0: xHCI Host Controller [ 0.831288] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 6 [ 0.831290] xhci_hcd 0000:06:00.0: Host supports USB 3.0 SuperSpeed [ 0.831302] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM. [ 0.831315] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.831316] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.831318] usb usb6: Product: xHCI Host Controller [ 0.831319] usb usb6: Manufacturer: Linux 4.15.0-36-generic xhci-hcd [ 0.831320] usb usb6: SerialNumber: 0000:06:00.0 [ 0.831390] hub 6-0:1.0: USB hub found [ 0.831400] hub 6-0:1.0: 4 ports detected [ 0.831513] i8042: PNP: No PS/2 controller found. [ 0.831557] mousedev: PS/2 mouse device common for all mice [ 0.831645] rtc_cmos 00:02: RTC can wake from S4 [ 0.831756] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 0.831780] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.831784] i2c /dev entries driver [ 0.831788] pcie_mp2_amd: AMD(R) PCI-E MP2 Communication Driver Version: 1.0 [ 0.831829] device-mapper: uevent: version 1.0.3 [ 0.831870] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com [ 0.831875] intel_pstate: Intel P-state driver initializing [ 0.832115] ledtrig-cpu: registered to indicate activity on CPUs [ 0.832474] NET: Registered protocol family 10 [ 0.834859] Segment Routing with IPv6 [ 0.834870] NET: Registered protocol family 17 [ 0.834897] Key type dns_resolver registered [ 0.835044] RAS: Correctable Errors collector initialized. [ 0.835063] microcode: sig=0x206a7, pf=0x2, revision=0x2e [ 0.835091] microcode: Microcode Update Driver: v2.2. [ 0.835097] sched_clock: Marking stable (835088639, 0)->(811365394, 23723245) [ 0.835205] registered taskstats version 1 [ 0.835213] Loading compiled-in X.509 certificates [ 0.836779] Loaded X.509 cert 'Build time autogenerated kernel key: fcd93cd0852f7ae1da10896371e06e3c19479c00' [ 0.836791] zswap: loaded using pool lzo/zbud [ 0.838791] Key type big_key registered [ 0.838793] Key type trusted registered [ 0.839705] Key type encrypted registered [ 0.839706] AppArmor: AppArmor sha1 policy hashing enabled [ 0.839708] ima: No TPM chip found, activating TPM-bypass! (rc=-19) [ 0.839710] ima: Allocated hash algorithm: sha1 [ 0.839722] evm: HMAC attrs: 0x1 [ 0.839933] Magic number: 6:797:280 [ 0.839952] tty tty17: hash matches [ 0.840046] rtc_cmos 00:02: setting system clock to 2018-10-09 13:17:14 UTC (1539091034) [ 0.840080] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.840080] EDD information not available. [ 0.841601] Freeing unused kernel memory: 2408K [ 0.864073] Write protecting the kernel read-only data: 20480k [ 0.864570] Freeing unused kernel memory: 2008K [ 0.867121] Freeing unused kernel memory: 1896K [ 0.871368] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.871368] x86/mm: Checking user space page tables [ 0.875513] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.926921] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 0.926928] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control [ 0.927415] r8169 0000:03:00.0 eth0: RTL8168evl/8111evl at 0x (ptrval), 00:0b:0e:0f:00:ed, XID 0c900800 IRQ 26 [ 0.927416] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 0.928792] ahci 0000:00:1f.2: version 3.0 [ 0.939012] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 0.939014] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst [ 0.944804] r8169 0000:03:00.0 enp3s0: renamed from eth0 [ 0.981211] checking generic (e9000000 130000) vs hw (e0000000 8000000) [ 0.981212] checking generic (e9000000 130000) vs hw (e8000000 2000000) [ 0.981213] fb: switching to nouveaufb from VESA VGA [ 0.981227] Console: switching to colour dummy device 80x25 [ 0.981361] nouveau 0000:01:00.0: NVIDIA GK104 (0e4040a2) [ 0.996468] scsi host0: ahci [ 0.996601] scsi host1: ahci [ 0.996753] scsi host2: ahci [ 0.996910] scsi host3: ahci [ 0.996983] scsi host4: ahci [ 0.997047] scsi host5: ahci [ 0.997078] ata1: SATA max UDMA/133 abar m2048@0xf6212000 port 0xf6212100 irq 27 [ 0.997080] ata2: SATA max UDMA/133 abar m2048@0xf6212000 port 0xf6212180 irq 27 [ 0.997083] ata3: SATA max UDMA/133 abar m2048@0xf6212000 port 0xf6212200 irq 27 [ 0.997085] ata4: SATA max UDMA/133 abar m2048@0xf6212000 port 0xf6212280 irq 27 [ 0.997088] ata5: SATA max UDMA/133 abar m2048@0xf6212000 port 0xf6212300 irq 27 [ 0.997091] ata6: SATA max UDMA/133 abar m2048@0xf6212000 port 0xf6212380 irq 27 [ 1.082265] nouveau 0000:01:00.0: bios: version 80.04.c3.00.99 [ 1.083997] nouveau 0000:01:00.0: fb: 4096 MiB GDDR5 [ 1.144867] [TTM] Zone kernel: Available graphics memory: 4054896 kiB [ 1.144868] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 1.144868] [TTM] Initializing pool allocator [ 1.144870] [TTM] Initializing DMA pool allocator [ 1.144877] nouveau 0000:01:00.0: DRM: VRAM: 4096 MiB [ 1.144878] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB [ 1.144880] nouveau 0000:01:00.0: DRM: TMDS table version 2.0 [ 1.144881] nouveau 0000:01:00.0: DRM: DCB version 4.0 [ 1.144882] nouveau 0000:01:00.0: DRM: DCB outp 00: 01000f02 00020030 [ 1.144883] nouveau 0000:01:00.0: DRM: DCB outp 01: 02000f00 00000000 [ 1.144884] nouveau 0000:01:00.0: DRM: DCB outp 02: 08011f82 00020030 [ 1.144885] nouveau 0000:01:00.0: DRM: DCB outp 03: 02022f62 00020010 [ 1.144886] nouveau 0000:01:00.0: DRM: DCB outp 04: 04833fb6 0f420010 [ 1.144887] nouveau 0000:01:00.0: DRM: DCB outp 05: 04033f72 00020010 [ 1.144888] nouveau 0000:01:00.0: DRM: DCB conn 00: 00001030 [ 1.144889] nouveau 0000:01:00.0: DRM: DCB conn 01: 01000131 [ 1.144890] nouveau 0000:01:00.0: DRM: DCB conn 02: 00010261 [ 1.144891] nouveau 0000:01:00.0: DRM: DCB conn 03: 00020346 [ 1.148047] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.164050] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.164067] usb 3-3: new full-speed USB device number 2 using xhci_hcd [ 1.164085] usb 5-1: new high-speed USB device number 2 using xhci_hcd [ 1.165752] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.165753] [drm] Driver supports precise vblank timestamp query. [ 1.167147] nouveau 0000:01:00.0: DRM: MM: using COPY for buffer copies [ 1.304359] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.304360] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.304499] hub 1-1:1.0: USB hub found [ 1.304629] hub 1-1:1.0: 6 ports detected [ 1.310392] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.310419] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.311200] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364) [ 1.311208] No Local Variables are initialized for Method [_GTF] [ 1.311208] No Arguments are initialized for method [_GTF] [ 1.311210] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT1._GTF, AE_NOT_FOUND (20170831/psparse-550) [ 1.311374] ata2.00: NCQ Send/Recv Log not supported [ 1.311375] ata2.00: ATA-9: Samsung SSD 840 PRO Series, DXM06B0Q, max UDMA/133 [ 1.311376] ata2.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.311536] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364) [ 1.311541] No Local Variables are initialized for Method [_GTF] [ 1.311542] No Arguments are initialized for method [_GTF] [ 1.311543] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT1._GTF, AE_NOT_FOUND (20170831/psparse-550) [ 1.311644] ata2.00: NCQ Send/Recv Log not supported [ 1.311645] ata2.00: configured for UDMA/133 [ 1.311902] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364) [ 1.311906] No Local Variables are initialized for Method [_GTF] [ 1.311907] No Arguments are initialized for method [_GTF] [ 1.311908] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT0._GTF, AE_NOT_FOUND (20170831/psparse-550) [ 1.312001] ata1.00: ATA-6: ST3160023AS, 3.42, max UDMA/133 [ 1.312001] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (not used) [ 1.313472] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364) [ 1.313476] No Local Variables are initialized for Method [_GTF] [ 1.313477] No Arguments are initialized for method [_GTF] [ 1.313478] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT0._GTF, AE_NOT_FOUND (20170831/psparse-550) [ 1.313576] ata1.00: configured for UDMA/133 [ 1.313772] scsi 0:0:0:0: Direct-Access ATA ST3160023AS 3.42 PQ: 0 ANSI: 5 [ 1.314014] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 1.314027] sd 0:0:0:0: [sda] Write Protect is off [ 1.314028] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.314049] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.314064] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.314186] scsi 1:0:0:0: Direct-Access ATA Samsung SSD 840 6B0Q PQ: 0 ANSI: 5 [ 1.314267] ata2.00: Enabling discard_zeroes_data [ 1.314273] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 1.314282] usb 5-1: New USB device found, idVendor=2109, idProduct=3431 [ 1.314283] usb 5-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.314284] usb 5-1: Product: USB2.0 Hub [ 1.314322] sd 1:0:0:0: [sdb] 250069680 512-byte logical blocks: (128 GB/119 GiB) [ 1.314332] sd 1:0:0:0: [sdb] Write Protect is off [ 1.314333] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.314350] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.314413] ata2.00: Enabling discard_zeroes_data [ 1.314627] sdb: sdb1 sdb2 [ 1.314661] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.314689] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.314719] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.314750] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.314798] ata2.00: Enabling discard_zeroes_data [ 1.314921] hub 5-1:1.0: USB hub found [ 1.314943] sd 1:0:0:0: [sdb] Attached SCSI disk [ 1.315221] hub 5-1:1.0: 4 ports detected [ 1.315273] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364) [ 1.315278] No Local Variables are initialized for Method [_GTF] [ 1.315279] No Arguments are initialized for method [_GTF] [ 1.315286] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT3._GTF, AE_NOT_FOUND (20170831/psparse-550) [ 1.315314] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364) [ 1.315320] No Local Variables are initialized for Method [_GTF] [ 1.315321] No Arguments are initialized for method [_GTF] [ 1.315322] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT2._GTF, AE_NOT_FOUND (20170831/psparse-550) [ 1.317215] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364) [ 1.317219] No Local Variables are initialized for Method [_GTF] [ 1.317220] No Arguments are initialized for method [_GTF] [ 1.317221] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT4._GTF, AE_NOT_FOUND (20170831/psparse-550) [ 1.317373] ata5.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7 [ 1.317373] ata5.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.318588] sda: sda1 [ 1.318869] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.319291] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364) [ 1.319295] No Local Variables are initialized for Method [_GTF] [ 1.319296] No Arguments are initialized for method [_GTF] [ 1.319297] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT4._GTF, AE_NOT_FOUND (20170831/psparse-550) [ 1.319420] ata5.00: configured for UDMA/133 [ 1.319941] usb 3-3: New USB device found, idVendor=04d9, idProduct=a096 [ 1.319942] usb 3-3: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 1.319943] usb 3-3: Product: USB Keyboard [ 1.320448] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.320449] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.321021] hub 2-1:1.0: USB hub found [ 1.321106] hub 2-1:1.0: 8 ports detected [ 1.327293] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364) [ 1.327299] No Local Variables are initialized for Method [_GTF] [ 1.327300] No Arguments are initialized for method [_GTF] [ 1.327301] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT5._GTF, AE_NOT_FOUND (20170831/psparse-550) [ 1.328988] ata6.00: ATA-8: KINGSTON SHFS37A120G, 603ABBF0, max UDMA/133 [ 1.328989] ata6.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA [ 1.329735] ata4.00: ATA-7: WDC WD1600JS-40TGB0, 20.06C04, max UDMA/133 [ 1.329736] ata4.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.330410] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364) [ 1.330416] No Local Variables are initialized for Method [_GTF] [ 1.330416] No Arguments are initialized for method [_GTF] [ 1.330417] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT3._GTF, AE_NOT_FOUND (20170831/psparse-550) [ 1.330592] ata4.00: configured for UDMA/133 [ 1.333810] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364) [ 1.333815] No Local Variables are initialized for Method [_GTF] [ 1.333816] No Arguments are initialized for method [_GTF] [ 1.333817] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT5._GTF, AE_NOT_FOUND (20170831/psparse-550) [ 1.335306] ata6.00: configured for UDMA/133 [ 1.335464] ata3.00: ATA-7: WDC WD1600JS-40TGB0, 20.06C04, max UDMA/133 [ 1.335465] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.336084] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364) [ 1.336089] No Local Variables are initialized for Method [_GTF] [ 1.336089] No Arguments are initialized for method [_GTF] [ 1.336090] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT2._GTF, AE_NOT_FOUND (20170831/psparse-550) [ 1.336272] ata3.00: configured for UDMA/133 [ 1.336425] scsi 2:0:0:0: Direct-Access ATA WDC WD1600JS-40T 6C04 PQ: 0 ANSI: 5 [ 1.336600] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 1.336636] sd 2:0:0:0: [sdc] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 1.336644] sd 2:0:0:0: [sdc] Write Protect is off [ 1.336645] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 1.336661] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.336707] scsi 3:0:0:0: Direct-Access ATA WDC WD1600JS-40T 6C04 PQ: 0 ANSI: 5 [ 1.336803] sd 3:0:0:0: Attached scsi generic sg3 type 0 [ 1.336906] scsi 4:0:0:0: Direct-Access ATA SAMSUNG HD501LJ 0-12 PQ: 0 ANSI: 5 [ 1.336945] sd 3:0:0:0: [sdd] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 1.336952] sd 3:0:0:0: [sdd] Write Protect is off [ 1.336953] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 1.336966] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.337029] sd 4:0:0:0: Attached scsi generic sg4 type 0 [ 1.337136] scsi 5:0:0:0: Direct-Access ATA KINGSTON SHFS37A BBF0 PQ: 0 ANSI: 5 [ 1.337153] sd 4:0:0:0: [sde] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 1.337161] sd 4:0:0:0: [sde] Write Protect is off [ 1.337162] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00 [ 1.337174] sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.337225] sd 5:0:0:0: Attached scsi generic sg5 type 0 [ 1.337259] sd 5:0:0:0: [sdf] 234441648 512-byte logical blocks: (120 GB/112 GiB) [ 1.337266] sd 5:0:0:0: [sdf] Write Protect is off [ 1.337267] sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00 [ 1.337280] sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.337712] sdf: sdf1 sdf2 [ 1.338039] sd 5:0:0:0: [sdf] Attached SCSI disk [ 1.339416] sde: sde1 [ 1.339608] sd 4:0:0:0: [sde] Attached SCSI disk [ 1.343386] sdd: sdd1 [ 1.343610] sd 3:0:0:0: [sdd] Attached SCSI disk [ 1.361825] nouveau 0000:01:00.0: DRM: allocated 1920x1080 fb: 0x60000, bo (ptrval) [ 1.364133] fbcon: nouveaufb (fb0) is primary device [ 1.364168] Console: switching to colour frame buffer device 240x67 [ 1.364187] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device [ 1.379926] sdc: sdc1 [ 1.380321] sd 2:0:0:0: [sdc] Attached SCSI disk [ 1.401634] random: fast init done [ 1.416090] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0 [ 1.416109] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.416117] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.416120] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.448049] usb 3-4: new full-speed USB device number 3 using xhci_hcd [ 1.592050] usb 1-1.3: new high-speed USB device number 3 using ehci-pci [ 1.600328] usb 3-4: New USB device found, idVendor=045e, idProduct=0719 [ 1.600329] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.600330] usb 3-4: Product: Xbox 360 Wireless Receiver for Windows [ 1.600331] usb 3-4: Manufacturer: ©Microsoft [ 1.600332] usb 3-4: SerialNumber: E167C4C0 [ 1.603651] hidraw: raw HID events driver (C) Jiri Kosina [ 1.608048] usb 2-1.5: new full-speed USB device number 3 using ehci-pci [ 1.615344] usbcore: registered new interface driver usbhid [ 1.615344] usbhid: USB HID core driver [ 1.616660] input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/0003:04D9:A096.0001/input/input2 [ 1.676191] hid-generic 0003:04D9:A096.0001: input,hidraw0: USB HID v1.11 Keyboard [USB Keyboard] on usb-0000:00:14.0-3/input0 [ 1.676336] input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/0003:04D9:A096.0002/input/input3 [ 1.701664] usb 1-1.3: New USB device found, idVendor=058f, idProduct=6366 [ 1.701665] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.701666] usb 1-1.3: Product: Flash Card Reader/Writer [ 1.701667] usb 1-1.3: Manufacturer: Generic [ 1.701668] usb 1-1.3: SerialNumber: 058F63666438 [ 1.704243] usb-storage 1-1.3:1.0: USB Mass Storage device detected [ 1.704387] scsi host6: usb-storage 1-1.3:1.0 [ 1.704429] usbcore: registered new interface driver usb-storage [ 1.705260] usbcore: registered new interface driver uas [ 1.718879] usb 2-1.5: New USB device found, idVendor=046d, idProduct=c332 [ 1.718882] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.718885] usb 2-1.5: Product: Gaming Mouse G502 [ 1.718887] usb 2-1.5: Manufacturer: Logitech [ 1.718889] usb 2-1.5: SerialNumber: 156836633237 [ 1.720482] input: Logitech Gaming Mouse G502 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/0003:046D:C332.0004/input/input4 [ 1.736356] hid-generic 0003:04D9:A096.0002: input,hiddev0,hidraw1: USB HID v1.11 Keyboard [USB Keyboard] on usb-0000:00:14.0-3/input1 [ 1.736510] hid-generic 0003:046D:C332.0004: input,hidraw2: USB HID v1.11 Mouse [Logitech Gaming Mouse G502] on usb-0000:00:1d.0-1.5/input0 [ 1.736571] hid-generic 0003:04D9:A096.0003: hiddev1,hidraw3: USB HID v1.11 Device [USB Keyboard] on usb-0000:00:14.0-3/input2 [ 1.737708] input: Logitech Gaming Mouse G502 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.1/0003:046D:C332.0005/input/input5 [ 1.788079] tsc: Refined TSC clocksource calibration: 3317.300 MHz [ 1.788088] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2fd122fdbfe, max_idle_ns: 440795203890 ns [ 1.796391] hid-generic 0003:046D:C332.0005: input,hiddev2,hidraw4: USB HID v1.11 Keyboard [Logitech Gaming Mouse G502] on usb-0000:00:1d.0-1.5/input1 [ 1.835491] EXT4-fs (sdf1): mounted filesystem with ordered data mode. Opts: (null) [ 1.876081] usb 2-1.6: new full-speed USB device number 4 using ehci-pci [ 1.953761] ip_tables: (C) 2000-2006 Netfilter Core Team [ 1.959760] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 1.976274] systemd[1]: Detected architecture x86-64. [ 1.977715] systemd[1]: Set hostname to . [ 1.991123] usb 2-1.6: New USB device found, idVendor=045e, idProduct=07a5 [ 1.991125] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.991126] usb 2-1.6: Product: Microsoft® 2.4GHz Transceiver v9.0 [ 1.991127] usb 2-1.6: Manufacturer: Microsoft [ 1.995621] input: Microsoft Microsoft® 2.4GHz Transceiver v9.0 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/0003:045E:07A5.0006/input/input6 [ 2.052226] hid-generic 0003:045E:07A5.0006: input,hidraw5: USB HID v1.11 Keyboard [Microsoft Microsoft® 2.4GHz Transceiver v9.0] on usb-0000:00:1d.0-1.6/input0 [ 2.056390] input: Microsoft Microsoft® 2.4GHz Transceiver v9.0 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.1/0003:045E:07A5.0007/input/input7 [ 2.056606] hid-generic 0003:045E:07A5.0007: input,hidraw6: USB HID v1.11 Mouse [Microsoft Microsoft® 2.4GHz Transceiver v9.0] on usb-0000:00:1d.0-1.6/input1 [ 2.061934] input: Microsoft Microsoft® 2.4GHz Transceiver v9.0 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.2/0003:045E:07A5.0008/input/input8 [ 2.066591] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 2.066724] systemd[1]: Created slice System Slice. [ 2.066772] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 2.066820] systemd[1]: Listening on udev Control Socket. [ 2.066860] systemd[1]: Listening on Syslog Socket. [ 2.066935] systemd[1]: Listening on Journal Audit Socket. [ 2.066990] systemd[1]: Listening on Journal Socket. [ 2.078196] EXT4-fs (sdf1): re-mounted. Opts: errors=remount-ro [ 2.084463] lp: driver loaded but no devices found [ 2.087027] ppdev: user-space parallel port driver [ 2.120308] hid-generic 0003:045E:07A5.0008: input,hidraw7: USB HID v1.11 Device [Microsoft Microsoft® 2.4GHz Transceiver v9.0] on usb-0000:00:1d.0-1.6/input2 [ 2.182851] systemd-journald[276]: Received request to flush runtime journal from PID 1 [ 2.227803] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 2.249915] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20170831/utaddress-247) [ 2.249920] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 2.249923] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247) [ 2.249925] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 2.249925] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247) [ 2.249928] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 2.249928] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247) [ 2.249930] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 2.249930] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 2.286726] random: crng init done [ 2.286727] random: 7 urandom warning(s) missed due to ratelimiting [ 2.311946] snd_ctxfi 0000:05:01.0: chip 20K1 model SB073x (1102:0031) is found [ 2.634026] snd_ctxfi 0000:05:01.0: Use xfi-native timer [ 2.651867] usbcore: registered new interface driver xpad [ 2.665630] asus_wmi: ASUS WMI generic driver loaded [ 2.668277] asus_wmi: Initialization: 0x0 [ 2.668302] asus_wmi: BIOS WMI version: 0.9 [ 2.668345] asus_wmi: SFUN value: 0x0 [ 2.668761] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input9 [ 2.670342] asus_wmi: Number of fans: 1 [ 2.673283] snd_hda_intel 0000:01:00.1: Disabling MSI [ 2.673287] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client [ 2.691808] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer [ 2.691809] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules [ 2.691810] RAPL PMU: hw unit of domain package 2^-16 Joules [ 2.691810] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules [ 2.704533] AVX version of gcm_enc/dec engaged. [ 2.704534] AES CTR mode by8 optimization enabled [ 2.716757] scsi 6:0:0:0: Direct-Access Multiple Card Reader 1.00 PQ: 0 ANSI: 0 [ 2.716935] sd 6:0:0:0: Attached scsi generic sg6 type 0 [ 2.718385] sd 6:0:0:0: [sdg] Attached SCSI removable disk [ 2.764563] intel_rapl: Found RAPL domain package [ 2.764564] intel_rapl: Found RAPL domain core [ 2.764565] intel_rapl: Found RAPL domain uncore [ 2.764569] intel_rapl: RAPL package 0 domain package locked by BIOS [ 2.814665] clocksource: Switched to clocksource tsc [ 2.923178] audit: type=1400 audit(1539091036.576:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=740 comm="apparmor_parser" [ 2.923181] audit: type=1400 audit(1539091036.576:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=740 comm="apparmor_parser" [ 2.923182] audit: type=1400 audit(1539091036.576:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=740 comm="apparmor_parser" [ 2.930807] audit: type=1400 audit(1539091036.584:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=737 comm="apparmor_parser" [ 2.930809] audit: type=1400 audit(1539091036.584:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=737 comm="apparmor_parser" [ 2.930811] audit: type=1400 audit(1539091036.584:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=737 comm="apparmor_parser" [ 2.930812] audit: type=1400 audit(1539091036.584:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=737 comm="apparmor_parser" [ 2.931631] audit: type=1400 audit(1539091036.584:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/ioquake3/ioq3ded" pid=741 comm="apparmor_parser" [ 2.935142] audit: type=1400 audit(1539091036.588:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=743 comm="apparmor_parser" [ 3.136575] Adding 2105812k swap on /dev/sdf2. Priority:-2 extents:1 across:2105812k SSFS [ 3.340699] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 3.588173] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready [ 3.721451] r8169 0000:03:00.0 enp3s0: link down [ 3.721452] r8169 0000:03:00.0 enp3s0: link down [ 3.721518] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready [ 4.632755] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input10 [ 4.632793] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11 [ 4.632823] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12 [ 4.632852] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13 [ 5.226531] r8169 0000:03:00.0 enp3s0: link up [ 5.226537] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready [ 5.308899] vboxdrv: loading out-of-tree module taints kernel. [ 5.309005] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel [ 5.312454] vboxdrv: Found 4 processor cores [ 5.333925] vboxdrv: TSC mode is Invariant, tentative frequency 3317288018 Hz [ 5.333926] vboxdrv: Successfully loaded version 5.2.10_Ubuntu (interface 0x00290001) [ 5.336995] VBoxNetFlt: Successfully started. [ 5.344082] VBoxNetAdp: Successfully started. [ 5.347109] VBoxPciLinuxInit [ 5.348652] vboxpci: IOMMU not found (not registered) [ 8.636929] rfkill: input handler disabled [ 2319.127358] perf: interrupt took too long (2508 > 2500), lowering kernel.perf_event_max_sample_rate to 79500 [ 4873.947475] usb 1-1-port6: Cannot enable. Maybe the USB cable is bad? [ 4874.027179] usb 1-1.6: new high-speed USB device number 5 using ehci-pci [ 4874.891469] usb 1-1-port6: Cannot enable. Maybe the USB cable is bad? [ 4874.891594] usb 1-1-port6: attempt power cycle [ 4875.703165] usb 1-1.6: new high-speed USB device number 6 using ehci-pci [ 4875.752465] usb 1-1.6: New USB device found, idVendor=a16f, idProduct=0304 [ 4875.752469] usb 1-1.6: New USB device strings: Mfr=2, Product=3, SerialNumber=0 [ 4875.752472] usb 1-1.6: Product: USB2.0 UVC PC Camera [ 4875.752474] usb 1-1.6: Manufacturer: GenesysLogic Technology Co., Ltd. [ 4875.834177] media: Linux media interface: v0.10 [ 4875.840366] Linux video capture interface: v2.00 [ 4875.848562] uvcvideo: Found UVC 1.00 device USB2.0 UVC PC Camera (a16f:0304) [ 4875.892156] uvcvideo 1-1.6:1.0: Entity type for entity Extension 2 was not initialized! [ 4875.892158] uvcvideo 1-1.6:1.0: Entity type for entity Extension 5 was not initialized! [ 4875.892159] uvcvideo 1-1.6:1.0: Entity type for entity Processing 3 was not initialized! [ 4875.892160] uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized! [ 4875.892254] input: USB2.0 UVC PC Camera: USB2.0 UV as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input14 [ 4875.892389] usbcore: registered new interface driver uvcvideo [ 4875.892389] USB Video Class driver (1.1.1) [ 4912.889938] usb 1-1.6: USB disconnect, device number 6 [ 4912.890428] uvcvideo: Failed to resubmit video URB (-19). [ 4913.138802] usb 1-1.6: new high-speed USB device number 7 using ehci-pci [ 4913.854797] usb 1-1.6: device descriptor read/64, error -71 [ 4914.086205] usb 1-1.6: New USB device found, idVendor=a16f, idProduct=0304 [ 4914.086209] usb 1-1.6: New USB device strings: Mfr=2, Product=3, SerialNumber=0 [ 4914.086211] usb 1-1.6: Product: USB2.0 UVC PC Camera [ 4914.086214] usb 1-1.6: Manufacturer: GenesysLogic Technology Co., Ltd. [ 4914.102703] uvcvideo: Found UVC 1.00 device USB2.0 UVC PC Camera (a16f:0304) [ 4914.118610] uvcvideo 1-1.6:1.0: Entity type for entity Extension 2 was not initialized! [ 4914.118614] uvcvideo 1-1.6:1.0: Entity type for entity Extension 5 was not initialized! [ 4914.118617] uvcvideo 1-1.6:1.0: Entity type for entity Processing 3 was not initialized! [ 4914.118619] uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized! [ 4914.118799] input: USB2.0 UVC PC Camera: USB2.0 UV as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input15 [ 4914.425906] usb 1-1.6: USB disconnect, device number 7 [ 4914.646805] usb 1-1.6: new high-speed USB device number 8 using ehci-pci [ 4914.774201] usb 1-1.6: New USB device found, idVendor=a16f, idProduct=0304 [ 4914.774205] usb 1-1.6: New USB device strings: Mfr=2, Product=3, SerialNumber=0 [ 4914.774207] usb 1-1.6: Product: USB2.0 UVC PC Camera [ 4914.774209] usb 1-1.6: Manufacturer: GenesysLogic Technology Co., Ltd. [ 4914.802455] uvcvideo: Found UVC 1.00 device USB2.0 UVC PC Camera (a16f:0304) [ 4914.805479] uvcvideo 1-1.6:1.0: Entity type for entity Extension 2 was not initialized! [ 4914.805483] uvcvideo 1-1.6:1.0: Entity type for entity Extension 5 was not initialized! [ 4914.805486] uvcvideo 1-1.6:1.0: Entity type for entity Processing 3 was not initialized! [ 4914.805488] uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized! [ 4914.805685] input: USB2.0 UVC PC Camera: USB2.0 UV as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input16 [ 4931.910628] usb 1-1.6: reset high-speed USB device number 8 using ehci-pci [ 4932.834616] usb 1-1.6: device descriptor read/64, error -71 [ 4999.493997] usb 1-1.6: reset high-speed USB device number 8 using ehci-pci [ 5000.190624] usb 1-1.6: USB disconnect, device number 8 [ 5009.465924] usb 3-2: new high-speed USB device number 4 using xhci_hcd [ 5009.632917] usb 3-2: New USB device found, idVendor=a16f, idProduct=0304 [ 5009.632921] usb 3-2: New USB device strings: Mfr=2, Product=3, SerialNumber=0 [ 5009.632923] usb 3-2: Product: USB2.0 UVC PC Camera [ 5009.632926] usb 3-2: Manufacturer: GenesysLogic Technology Co., Ltd. [ 5009.679112] uvcvideo: Found UVC 1.00 device USB2.0 UVC PC Camera (a16f:0304) [ 5009.722566] uvcvideo 3-2:1.0: Entity type for entity Extension 2 was not initialized! [ 5009.722570] uvcvideo 3-2:1.0: Entity type for entity Extension 5 was not initialized! [ 5009.722572] uvcvideo 3-2:1.0: Entity type for entity Processing 3 was not initialized! [ 5009.722574] uvcvideo 3-2:1.0: Entity type for entity Camera 1 was not initialized! [ 5009.722750] input: USB2.0 UVC PC Camera: USB2.0 UV as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/input/input17 [ 5480.732357] uvcvideo: Failed to query (GET_DEF) UVC control 11 on unit 3: -32 (exp. 1). [ 5480.785012] uvcvideo: Failed to query (GET_DEF) UVC control 11 on unit 3: -32 (exp. 1). [ 5480.809159] uvcvideo: Failed to query (GET_DEF) UVC control 11 on unit 3: -32 (exp. 1). [ 5495.271155] uvcvideo: Failed to query (GET_DEF) UVC control 11 on unit 3: -32 (exp. 1). [ 5495.309273] uvcvideo: Failed to query (GET_DEF) UVC control 11 on unit 3: -32 (exp. 1). [ 5495.344200] uvcvideo: Failed to query (GET_DEF) UVC control 11 on unit 3: -32 (exp. 1). [ 5984.692489] usb 3-2: USB disconnect, device number 4