[ 33.816269] vboxdrv: Trying to deactivate the NMI watchdog permanently... [ 33.816272] vboxdrv: Successfully done. [ 33.816273] vboxdrv: Found 2 processor cores. [ 33.816327] VBoxDrv: dbg - g_abExecMemory=ffffffffa0327480 [ 33.816400] vboxdrv: fAsync=0 offMin=0x1b0 offMax=0x40ef [ 33.816442] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 33.816444] vboxdrv: Successfully loaded version 3.0.12 (interface 0x00110000). [ 34.062010] VBoxNetFlt: dbg - g_abExecMemory=ffffffffa04c6220 [ 35.647734] i2c-adapter i2c-2: unable to read EDID block. [ 35.647738] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 35.652272] i2c-adapter i2c-2: unable to read EDID block. [ 35.652274] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 35.656737] i2c-adapter i2c-4: unable to read EDID block. [ 35.656739] i915 0000:00:02.0: HDMI Type A-2: no EDID data [ 35.661197] i2c-adapter i2c-4: unable to read EDID block. [ 35.661199] i915 0000:00:02.0: HDMI Type A-2: no EDID data [ 35.707208] [drm] TV-25: set mode NTSC 480i 0 [ 35.714859] ppdev: user-space parallel port driver [ 35.848747] [drm] TV-25: set mode NTSC 480i 0 [ 36.097839] i2c-adapter i2c-2: unable to read EDID block. [ 36.097843] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 36.102374] i2c-adapter i2c-2: unable to read EDID block. [ 36.102376] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 36.106834] i2c-adapter i2c-4: unable to read EDID block. [ 36.106836] i915 0000:00:02.0: HDMI Type A-2: no EDID data [ 36.111296] i2c-adapter i2c-4: unable to read EDID block. [ 36.111298] i915 0000:00:02.0: HDMI Type A-2: no EDID data [ 36.157311] [drm] TV-25: set mode NTSC 480i 0 [ 36.298892] [drm] TV-25: set mode NTSC 480i 0 [ 36.577005] i2c-adapter i2c-2: unable to read EDID block. [ 36.577009] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 36.581528] i2c-adapter i2c-2: unable to read EDID block. [ 36.581531] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 36.586103] i2c-adapter i2c-4: unable to read EDID block. [ 36.586106] i915 0000:00:02.0: HDMI Type A-2: no EDID data [ 36.590614] i2c-adapter i2c-4: unable to read EDID block. [ 36.590616] i915 0000:00:02.0: HDMI Type A-2: no EDID data [ 36.636686] [drm] TV-25: set mode NTSC 480i 0 [ 36.778384] [drm] TV-25: set mode NTSC 480i 0 [ 48.877130] VBoxNetAdp: dbg - g_abExecMemory=ffffffffa04e4b20 [ 177.873765] i2c-adapter i2c-2: unable to read EDID block. [ 177.873769] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 177.878193] i2c-adapter i2c-2: unable to read EDID block. [ 177.878195] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 177.882695] i2c-adapter i2c-4: unable to read EDID block. [ 177.882698] i915 0000:00:02.0: HDMI Type A-2: no EDID data [ 177.887325] i2c-adapter i2c-4: unable to read EDID block. [ 177.887327] i915 0000:00:02.0: HDMI Type A-2: no EDID data [ 177.933353] [drm] TV-25: set mode NTSC 480i 0 [ 178.074529] [drm] TV-25: set mode NTSC 480i 0 [ 178.337902] i2c-adapter i2c-2: unable to read EDID block. [ 178.337907] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 178.342808] i2c-adapter i2c-2: unable to read EDID block. [ 178.342813] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 178.347430] i2c-adapter i2c-4: unable to read EDID block. [ 178.347432] i915 0000:00:02.0: HDMI Type A-2: no EDID data [ 178.352118] i2c-adapter i2c-4: unable to read EDID block. [ 178.352120] i915 0000:00:02.0: HDMI Type A-2: no EDID data [ 178.398135] [drm] TV-25: set mode NTSC 480i 0 [ 178.539322] [drm] TV-25: set mode NTSC 480i 0 [ 178.798856] i2c-adapter i2c-2: unable to read EDID block. [ 178.798860] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 178.803314] i2c-adapter i2c-2: unable to read EDID block. [ 178.803316] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 178.807758] i2c-adapter i2c-4: unable to read EDID block. [ 178.807760] i915 0000:00:02.0: HDMI Type A-2: no EDID data [ 178.812208] i2c-adapter i2c-4: unable to read EDID block. [ 178.812210] i915 0000:00:02.0: HDMI Type A-2: no EDID data [ 178.858223] [drm] TV-25: set mode NTSC 480i 0 [ 178.999405] [drm] TV-25: set mode NTSC 480i 0 [ 180.518744] i2c-adapter i2c-2: unable to read EDID block. [ 180.518747] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 180.523195] i2c-adapter i2c-2: unable to read EDID block. [ 180.523197] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 180.528021] i2c-adapter i2c-4: unable to read EDID block. [ 180.528023] i915 0000:00:02.0: HDMI Type A-2: no EDID data [ 180.532449] i2c-adapter i2c-4: unable to read EDID block. [ 180.532451] i915 0000:00:02.0: HDMI Type A-2: no EDID data [ 180.578476] [drm] TV-25: set mode NTSC 480i 0 [ 180.720046] [drm] TV-25: set mode NTSC 480i 0 [ 212.698160] i2c-adapter i2c-2: unable to read EDID block. [ 212.698163] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 212.702618] i2c-adapter i2c-2: unable to read EDID block. [ 212.702620] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 212.707070] i2c-adapter i2c-4: unable to read EDID block. [ 212.707072] i915 0000:00:02.0: HDMI Type A-2: no EDID data [ 212.711520] i2c-adapter i2c-4: unable to read EDID block. [ 212.711522] i915 0000:00:02.0: HDMI Type A-2: no EDID data [ 212.757530] [drm] TV-25: set mode NTSC 480i 0 [ 212.898714] [drm] TV-25: set mode NTSC 480i 0 [ 219.381593] PM: Syncing filesystems ... done. [ 219.383376] PM: Preparing system for mem sleep [ 219.383380] Freezing user space processes ... (elapsed 0.00 seconds) done. [ 219.384017] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [ 219.384070] PM: Entering mem sleep [ 219.384082] Suspending console(s) (use no_console_suspend to debug) [ 219.470229] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 219.816800] sd 0:0:0:0: [sda] Stopping disk [ 220.681477] ACPI handle has no context! [ 220.681483] sdhci-pci 0000:03:01.2: PME# disabled [ 220.681489] sdhci-pci 0000:03:01.2: PCI INT C disabled [ 220.681495] ACPI handle has no context! [ 220.705304] ACPI handle has no context! [ 220.740424] ata_piix 0000:00:1f.5: PCI INT D disabled [ 220.760307] ata_piix 0000:00:1f.2: PCI INT D disabled [ 220.780263] ehci_hcd 0000:00:1d.7: PCI INT A disabled [ 220.780271] uhci_hcd 0000:00:1d.2: PCI INT C disabled [ 220.780279] uhci_hcd 0000:00:1d.1: PCI INT B disabled [ 220.780286] uhci_hcd 0000:00:1d.0: PCI INT A disabled [ 220.780316] HDA Intel 0000:00:1b.0: PCI INT A disabled [ 220.800250] ehci_hcd 0000:00:1a.7: PCI INT C disabled [ 220.800258] uhci_hcd 0000:00:1a.2: PCI INT C disabled [ 220.800266] uhci_hcd 0000:00:1a.1: PCI INT B disabled [ 220.800273] uhci_hcd 0000:00:1a.0: PCI INT A disabled [ 220.800472] e1000e 0000:00:19.0: PCI INT A disabled [ 220.800477] e1000e 0000:00:19.0: PME# enabled [ 220.900300] PM: suspend devices took 1.520 seconds [ 220.900351] ricoh-mmc: Suspending. [ 220.900365] ricoh-mmc: Controller is now re-enabled. [ 220.900625] ehci_hcd 0000:00:1d.7: PME# disabled [ 220.920339] ehci_hcd 0000:00:1a.7: PME# disabled [ 220.948538] ACPI: Preparing to enter system sleep state S3 [ 221.060658] Disabling non-boot CPUs ... [ 221.170015] CPU 1 is now offline [ 221.170018] SMP alternatives: switching to UP code [ 221.175815] CPU0 attaching NULL sched-domain. [ 221.175818] CPU1 attaching NULL sched-domain. [ 221.175826] CPU0 attaching NULL sched-domain. [ 221.175987] CPU1 is down [ 221.176027] Extended CMOS year: 2000 [ 221.176027] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 221.176027] Back to C! [ 221.176027] CPU0: Thermal LVT vector (0xfa) already installed [ 221.176027] Extended CMOS year: 2000 [ 221.176027] Enabling non-boot CPUs ... [ 221.176027] SMP alternatives: switching to SMP code [ 221.183568] Booting processor 1 APIC 0x1 ip 0x6000 [ 221.175678] Initializing CPU#1 [ 221.175678] Calibrating delay using timer specific routine.. 4788.38 BogoMIPS (lpj=23941906) [ 221.175678] CPU: L1 I cache: 32K, L1 D cache: 32K [ 221.175678] CPU: L2 cache: 3072K [ 221.175678] CPU 1/0x1 -> Node 0 [ 221.175678] CPU: Physical Processor ID: 0 [ 221.175678] CPU: Processor Core ID: 1 [ 221.175678] mce: CPU supports 6 MCE banks [ 221.175678] CPU1: Thermal monitoring enabled (TM1) [ 221.175678] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 221.341991] CPU1: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz stepping 0a [ 221.342060] CPU0 attaching NULL sched-domain. [ 221.342522] Switched to high resolution mode on CPU 1 [ 221.380028] CPU0 attaching sched-domain: [ 221.380032] domain 0: span 0-1 level MC [ 221.380034] groups: 0 1 [ 221.380039] CPU1 attaching sched-domain: [ 221.380041] domain 0: span 0-1 level MC [ 221.380043] groups: 1 0 [ 221.382521] CPU1 is up [ 221.382523] ACPI: Waking up from system sleep state S3 [ 221.940429] i915 0000:00:02.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 221.940437] i915 0000:00:02.0: restoring config space at offset 0x8 (was 0x1, writing 0xef99) [ 221.940441] i915 0000:00:02.0: restoring config space at offset 0x6 (was 0xc, writing 0xe000000c) [ 221.940449] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407) [ 221.940475] pci 0000:00:02.1: restoring config space at offset 0x4 (was 0x4, writing 0xf6b00004) [ 221.940480] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007) [ 221.940506] e1000e 0000:00:19.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [ 221.940527] e1000e 0000:00:19.0: restoring config space at offset 0x6 (was 0x1, writing 0xefe1) [ 221.940533] e1000e 0000:00:19.0: restoring config space at offset 0x5 (was 0x0, writing 0xf6adb000) [ 221.940539] e1000e 0000:00:19.0: restoring config space at offset 0x4 (was 0x0, writing 0xf6ae0000) [ 221.940547] e1000e 0000:00:19.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100107) [ 221.940578] uhci_hcd 0000:00:1a.0: restoring config space at offset 0xf (was 0x100, writing 0x107) [ 221.940595] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x8 (was 0x1, writing 0x6f61) [ 221.940613] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900001) [ 221.940637] uhci_hcd 0000:00:1a.1: restoring config space at offset 0xf (was 0x200, writing 0x204) [ 221.940654] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x8 (was 0x1, writing 0x6f81) [ 221.940672] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900001) [ 221.940695] uhci_hcd 0000:00:1a.2: restoring config space at offset 0xf (was 0x300, writing 0x30a) [ 221.940711] uhci_hcd 0000:00:1a.2: restoring config space at offset 0x8 (was 0x1, writing 0x6fa1) [ 221.940728] uhci_hcd 0000:00:1a.2: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900001) [ 221.940787] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) [ 221.940811] ehci_hcd 0000:00:1a.7: PME# disabled [ 221.940836] HDA Intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x104) [ 221.940859] HDA Intel 0000:00:1b.0: restoring config space at offset 0x4 (was 0xfebfc004, writing 0xf6adc004) [ 221.940865] HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 221.940874] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100102) [ 221.940913] pcieport-driver 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x20100) [ 221.940928] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [ 221.940934] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0) [ 221.940940] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20000000, writing 0x200000f0) [ 221.940946] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x6 (was 0x0, writing 0xb0b00) [ 221.940956] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 221.940963] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100507) [ 221.941022] pcieport-driver 0000:00:1c.1: restoring config space at offset 0xf (was 0x200, writing 0x20200) [ 221.941036] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [ 221.941044] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0xf690f690) [ 221.941050] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x7 (was 0x20000000, writing 0x200000f0) [ 221.941056] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x6 (was 0x0, writing 0xc0c00) [ 221.941064] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 221.941073] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100507) [ 221.941132] pcieport-driver 0000:00:1c.2: restoring config space at offset 0xf (was 0x300, writing 0x20300) [ 221.941146] pcieport-driver 0000:00:1c.2: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [ 221.941153] pcieport-driver 0000:00:1c.2: restoring config space at offset 0x8 (was 0x0, writing 0xfff0) [ 221.941159] pcieport-driver 0000:00:1c.2: restoring config space at offset 0x7 (was 0x20000000, writing 0x200000f0) [ 221.941165] pcieport-driver 0000:00:1c.2: restoring config space at offset 0x6 (was 0x0, writing 0xd0d00) [ 221.941175] pcieport-driver 0000:00:1c.2: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 221.941182] pcieport-driver 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100000, writing 0x100507) [ 221.941241] pcieport-driver 0000:00:1c.3: restoring config space at offset 0xf (was 0x400, writing 0x20400) [ 221.941257] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x9 (was 0x10001, writing 0xf011f001) [ 221.941263] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x8 (was 0x0, writing 0xf680f660) [ 221.941269] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x7 (was 0x20000000, writing 0xd0d0) [ 221.941275] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x6 (was 0x0, writing 0xf0e00) [ 221.941285] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 221.941292] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100000, writing 0x100407) [ 221.941367] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 221.941390] uhci_hcd 0000:00:1d.1: restoring config space at offset 0xf (was 0x200, writing 0x204) [ 221.941408] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x8 (was 0x1, writing 0x6f21) [ 221.941425] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900001) [ 221.941447] uhci_hcd 0000:00:1d.2: restoring config space at offset 0xf (was 0x300, writing 0x30a) [ 221.941464] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x8 (was 0x1, writing 0x6f41) [ 221.941481] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900001) [ 221.941537] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) [ 221.941563] ehci_hcd 0000:00:1d.7: PME# disabled [ 221.941589] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x2280e0f0, writing 0x22802020) [ 221.941595] pci 0000:00:1e.0: restoring config space at offset 0x6 (was 0x20030300, writing 0x20070300) [ 221.941666] pci 0000:00:1f.0: restoring config space at offset 0x1 (was 0x2100007, writing 0x2100107) [ 221.941698] ata_piix 0000:00:1f.2: restoring config space at offset 0xf (was 0x400, writing 0x40a) [ 221.941745] pci 0000:00:1f.3: restoring config space at offset 0xf (was 0x200, writing 0x203) [ 221.941768] pci 0000:00:1f.3: restoring config space at offset 0x4 (was 0x4, writing 0xf6adaf04) [ 221.941778] pci 0000:00:1f.3: restoring config space at offset 0x1 (was 0x2800001, writing 0x2800103) [ 221.941802] ata_piix 0000:00:1f.5: restoring config space at offset 0xf (was 0x400, writing 0x40a) [ 221.941816] ata_piix 0000:00:1f.5: restoring config space at offset 0x9 (was 0x1, writing 0xefa1) [ 221.941835] ata_piix 0000:00:1f.5: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00007) [ 221.941895] iwlagn 0000:0c:00.0: restoring config space at offset 0xf (was 0x100, writing 0x103) [ 221.941938] iwlagn 0000:0c:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xf69fe004) [ 221.941948] iwlagn 0000:0c:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 221.941962] iwlagn 0000:0c:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100106) [ 221.942049] yenta_cardbus 0000:03:01.0: restoring config space at offset 0xf (was 0x7000100, writing 0x580010a) [ 221.942055] yenta_cardbus 0000:03:01.0: restoring config space at offset 0xe (was 0x0, writing 0x24fc) [ 221.942062] yenta_cardbus 0000:03:01.0: restoring config space at offset 0xd (was 0x0, writing 0x2400) [ 221.942068] yenta_cardbus 0000:03:01.0: restoring config space at offset 0xc (was 0x0, writing 0x20fc) [ 221.942075] yenta_cardbus 0000:03:01.0: restoring config space at offset 0xb (was 0x0, writing 0x2000) [ 221.942081] yenta_cardbus 0000:03:01.0: restoring config space at offset 0xa (was 0x0, writing 0xf0bff000) [ 221.942087] yenta_cardbus 0000:03:01.0: restoring config space at offset 0x9 (was 0x0, writing 0xf0800000) [ 221.942093] yenta_cardbus 0000:03:01.0: restoring config space at offset 0x8 (was 0x0, writing 0xf07ff000) [ 221.942100] yenta_cardbus 0000:03:01.0: restoring config space at offset 0x7 (was 0x0, writing 0xf0400000) [ 221.942106] yenta_cardbus 0000:03:01.0: restoring config space at offset 0x6 (was 0x0, writing 0xb0070403) [ 221.942113] yenta_cardbus 0000:03:01.0: restoring config space at offset 0x4 (was 0x0, writing 0xf6500000) [ 221.942121] yenta_cardbus 0000:03:01.0: restoring config space at offset 0x3 (was 0x820000, writing 0x82a810) [ 221.942129] yenta_cardbus 0000:03:01.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100007) [ 221.942309] ohci1394 0000:03:01.1: restoring config space at offset 0xf (was 0x4020200, writing 0x4020203) [ 221.942336] ohci1394 0000:03:01.1: restoring config space at offset 0x3 (was 0x800000, writing 0x804010) [ 221.942344] ohci1394 0000:03:01.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106) [ 221.942371] sdhci-pci 0000:03:01.2: restoring config space at offset 0xf (was 0x300, writing 0x30b) [ 221.942397] sdhci-pci 0000:03:01.2: restoring config space at offset 0x4 (was 0x0, writing 0xf65ff600) [ 221.942404] sdhci-pci 0000:03:01.2: restoring config space at offset 0x3 (was 0x800000, writing 0x804010) [ 221.942411] sdhci-pci 0000:03:01.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106) [ 221.942438] ricoh-mmc 0000:03:01.3: restoring config space at offset 0xf (was 0x300, writing 0x30b) [ 221.942464] ricoh-mmc 0000:03:01.3: restoring config space at offset 0x4 (was 0x0, writing 0xf65ff700) [ 221.942471] ricoh-mmc 0000:03:01.3: restoring config space at offset 0x3 (was 0x800000, writing 0x804010) [ 221.942478] ricoh-mmc 0000:03:01.3: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106) [ 221.942493] ricoh-mmc: Resuming. [ 221.942509] ricoh-mmc: Controller is now disabled. [ 221.997583] i915 0000:00:02.0: setting latency timer to 64 [ 222.059532] [drm] LVDS-8: set mode 1920x1200 c [ 222.080123] pci 0000:00:02.1: PME# disabled [ 222.080152] e1000e 0000:00:19.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 222.080158] e1000e 0000:00:19.0: setting latency timer to 64 [ 222.080165] e1000e 0000:00:19.0: PME# disabled [ 222.080170] e1000e 0000:00:19.0: PME# disabled [ 222.080220] e1000e 0000:00:19.0: irq 28 for MSI/MSI-X [ 222.142372] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 222.142379] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 222.142410] usb usb3: root hub lost power or was reset [ 222.142434] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 222.142441] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 222.142468] usb usb4: root hub lost power or was reset [ 222.142489] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 222.142495] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 222.142536] usb usb5: root hub lost power or was reset [ 222.142575] ehci_hcd 0000:00:1a.7: PME# disabled [ 222.142580] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 222.142587] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 222.142618] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 222.142625] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 222.142660] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 222.142668] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 222.142697] usb usb6: root hub lost power or was reset [ 222.142719] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 222.142727] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 222.142758] usb usb7: root hub lost power or was reset [ 222.142781] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 222.142787] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 222.142814] usb usb8: root hub lost power or was reset [ 222.142837] ehci_hcd 0000:00:1d.7: PME# disabled [ 222.142842] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 222.142849] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 222.142863] pci 0000:00:1e.0: setting latency timer to 64 [ 222.142874] ata_piix 0000:00:1f.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 222.142880] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 222.142937] ata_piix 0000:00:1f.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 222.142944] ata_piix 0000:00:1f.5: setting latency timer to 64 [ 222.352261] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[f65ff800-f65fffff] Max Packet=[2048] IR/IT contexts=[4/4] [ 222.358284] sdhci-pci 0000:03:01.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 222.492411] ata4: SATA link down (SStatus 4 SControl 300) [ 222.503836] ata3: SATA link down (SStatus 4 SControl 300) [ 222.573578] dell-wmi: Unknown key ffd0 pressed [ 222.640155] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 222.700842] ata2.00: configured for UDMA/33 [ 222.951135] sd 0:0:0:0: [sda] Starting disk [ 223.202860] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 223.261385] ata1.00: configured for UDMA/133 [ 223.410313] usb 5-1: reset full speed USB device using uhci_hcd and address 2 [ 223.585466] PM: resume devices took 1.640 seconds [ 223.585591] PM: Finishing wakeup. [ 223.585598] Restarting tasks ... done. [ 223.903082] e1000e 0000:00:19.0: irq 28 for MSI/MSI-X [ 223.962674] e1000e 0000:00:19.0: irq 28 for MSI/MSI-X [ 223.964126] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 224.953532] input: DualPoint Stick as /devices/platform/i8042/serio1/input/input15 [ 224.972103] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input16 [ 995.290281] usb 1-3: new high speed USB device using ehci_hcd and address 3 [ 995.441148] usb 1-3: configuration #1 chosen from 1 choice [ 995.441467] hub 1-3:1.0: USB hub found [ 995.441634] hub 1-3:1.0: 3 ports detected [ 995.560325] usb 1-4: new high speed USB device using ehci_hcd and address 4 [ 995.710706] usb 1-4: configuration #1 chosen from 1 choice [ 995.717544] hub 1-4:1.0: USB hub found [ 995.720346] hub 1-4:1.0: 3 ports detected [ 995.727345] i2c-adapter i2c-2: unable to read EDID block. [ 995.727349] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 995.731785] i2c-adapter i2c-2: unable to read EDID block. [ 995.731787] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 995.736417] i2c-adapter i2c-4: unable to read EDID block. [ 995.736419] i915 0000:00:02.0: HDMI Type A-2: no EDID data [ 995.740856] i2c-adapter i2c-4: unable to read EDID block. [ 995.740858] i915 0000:00:02.0: HDMI Type A-2: no EDID data [ 995.786892] [drm] TV-25: set mode NTSC 480i 0 [ 995.928432] [drm] TV-25: set mode NTSC 480i 0 [ 996.183469] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [ 996.183478] 0000:00:19.0: eth0: 10/100 speed: disabling TSO [ 996.184608] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 1006.500257] eth0: no IPv6 routers present [ 1661.270581] usb 1-4.1: new low speed USB device using ehci_hcd and address 5 [ 1661.385213] usb 1-4.1: configuration #1 chosen from 1 choice [ 1661.447728] usbcore: registered new interface driver hiddev [ 1661.450772] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4.1/1-4.1:1.0/input/input17 [ 1661.450968] generic-usb 0003:046D:C018.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1a.7-4.1/input0 [ 1661.451004] usbcore: registered new interface driver usbhid [ 1661.451010] usbhid: v2.6:USB HID core driver [ 1769.613742] i2c-adapter i2c-2: unable to read EDID block. [ 1769.613752] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 1769.618237] i2c-adapter i2c-2: unable to read EDID block. [ 1769.618243] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 1769.623274] i2c-adapter i2c-4: unable to read EDID block. [ 1769.623276] i915 0000:00:02.0: HDMI Type A-2: no EDID data [ 1769.627696] i2c-adapter i2c-4: unable to read EDID block. [ 1769.627698] i915 0000:00:02.0: HDMI Type A-2: no EDID data [ 1769.673727] [drm] TV-25: set mode NTSC 480i 0 [ 1769.815141] [drm] TV-25: set mode NTSC 480i 0 [ 1770.061329] i2c-adapter i2c-2: unable to read EDID block. [ 1770.061332] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 1770.065757] i2c-adapter i2c-2: unable to read EDID block. [ 1770.065759] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 1770.070221] i2c-adapter i2c-4: unable to read EDID block. [ 1770.070223] i915 0000:00:02.0: HDMI Type A-2: no EDID data [ 1770.074981] i2c-adapter i2c-4: unable to read EDID block. [ 1770.074983] i915 0000:00:02.0: HDMI Type A-2: no EDID data [ 1770.121009] [drm] TV-25: set mode NTSC 480i 0 [ 1770.262335] [drm] TV-25: set mode NTSC 480i 0 [ 1771.922287] i2c-adapter i2c-2: unable to read EDID block. [ 1771.922299] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 1771.926873] i2c-adapter i2c-2: unable to read EDID block. [ 1771.926876] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 1771.931464] i2c-adapter i2c-4: unable to read EDID block. [ 1771.931467] i915 0000:00:02.0: HDMI Type A-2: no EDID data [ 1771.936122] i2c-adapter i2c-4: unable to read EDID block. [ 1771.936124] i915 0000:00:02.0: HDMI Type A-2: no EDID data [ 1771.982248] [drm] TV-25: set mode NTSC 480i 0 [ 1772.123726] [drm] TV-25: set mode NTSC 480i 0 [ 1772.368897] i2c-adapter i2c-2: unable to read EDID block. [ 1772.368901] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 1772.373713] i2c-adapter i2c-2: unable to read EDID block. [ 1772.373715] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 1772.378161] i2c-adapter i2c-4: unable to read EDID block. [ 1772.378163] i915 0000:00:02.0: HDMI Type A-2: no EDID data [ 1772.382934] i2c-adapter i2c-4: unable to read EDID block. [ 1772.382936] i915 0000:00:02.0: HDMI Type A-2: no EDID data [ 1772.428967] [drm] TV-25: set mode NTSC 480i 0 [ 1772.570657] [drm] TV-25: set mode NTSC 480i 0 [ 1772.823299] i2c-adapter i2c-2: unable to read EDID block. [ 1772.823309] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 1772.827773] i2c-adapter i2c-2: unable to read EDID block. [ 1772.827775] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 1772.832217] i2c-adapter i2c-4: unable to read EDID block. [ 1772.832219] i915 0000:00:02.0: HDMI Type A-2: no EDID data [ 1772.836677] i2c-adapter i2c-4: unable to read EDID block. [ 1772.836679] i915 0000:00:02.0: HDMI Type A-2: no EDID data [ 1772.882706] [drm] TV-25: set mode NTSC 480i 0 [ 1773.024569] [drm] TV-25: set mode NTSC 480i 0 [ 1823.520308] usb 2-2: new high speed USB device using ehci_hcd and address 2 [ 1823.672271] usb 2-2: configuration #1 chosen from 1 choice [ 1823.717222] Initializing USB Mass Storage driver... [ 1823.717878] scsi4 : SCSI emulation for USB Mass Storage devices [ 1823.718269] usb-storage: device found at 2 [ 1823.718275] usb-storage: waiting for device to settle before scanning [ 1823.718282] usbcore: registered new interface driver usb-storage [ 1823.718290] USB Mass Storage support registered. [ 1828.710636] usb-storage: device scan complete [ 1828.711361] scsi 4:0:0:0: Direct-Access Memorex Ultra TD v1.0 3.07 PQ: 0 ANSI: 0 [ 1828.712918] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 1828.721328] sd 4:0:0:0: [sdb] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 1828.723582] sd 4:0:0:0: [sdb] Write Protect is off [ 1828.723591] sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 1828.723598] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 1828.729871] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 1828.734474] sdb: sdb1 [ 1828.780510] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 1828.785126] sd 4:0:0:0: [sdb] Attached SCSI disk [ 2041.547717] i2c-adapter i2c-2: unable to read EDID block. [ 2041.547721] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 2041.552293] i2c-adapter i2c-2: unable to read EDID block. [ 2041.552295] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 2041.556768] i2c-adapter i2c-4: unable to read EDID block. [ 2041.556770] i915 0000:00:02.0: HDMI Type A-2: no EDID data [ 2041.561419] i2c-adapter i2c-4: unable to read EDID block. [ 2041.561421] i915 0000:00:02.0: HDMI Type A-2: no EDID data [ 2041.607476] [drm] TV-25: set mode NTSC 480i 0 [ 2041.748762] [drm] TV-25: set mode NTSC 480i 0 [ 2042.004290] i2c-adapter i2c-2: unable to read EDID block. [ 2042.004294] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 2042.008714] i2c-adapter i2c-2: unable to read EDID block. [ 2042.008716] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 2042.013184] i2c-adapter i2c-4: unable to read EDID block. [ 2042.013186] i915 0000:00:02.0: HDMI Type A-2: no EDID data [ 2042.018159] i2c-adapter i2c-4: unable to read EDID block. [ 2042.018161] i915 0000:00:02.0: HDMI Type A-2: no EDID data [ 2042.064192] [drm] TV-25: set mode NTSC 480i 0 [ 2042.205819] [drm] TV-25: set mode NTSC 480i 0 [ 2042.451443] i2c-adapter i2c-2: unable to read EDID block. [ 2042.451446] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 2042.456142] i2c-adapter i2c-2: unable to read EDID block. [ 2042.456144] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 2042.460602] i2c-adapter i2c-4: unable to read EDID block. [ 2042.460604] i915 0000:00:02.0: HDMI Type A-2: no EDID data [ 2042.465373] i2c-adapter i2c-4: unable to read EDID block. [ 2042.465375] i915 0000:00:02.0: HDMI Type A-2: no EDID data [ 2042.511395] [drm] TV-25: set mode NTSC 480i 0 [ 2042.653095] [drm] TV-25: set mode NTSC 480i 0 [ 2043.192923] i2c-adapter i2c-2: unable to read EDID block. [ 2043.192932] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 2043.197412] i2c-adapter i2c-2: unable to read EDID block. [ 2043.197414] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 2043.201866] i2c-adapter i2c-4: unable to read EDID block. [ 2043.201868] i915 0000:00:02.0: HDMI Type A-2: no EDID data [ 2043.206848] i2c-adapter i2c-4: unable to read EDID block. [ 2043.206851] i915 0000:00:02.0: HDMI Type A-2: no EDID data [ 2043.252884] [drm] TV-25: set mode NTSC 480i 0 [ 2043.394583] [drm] TV-25: set mode NTSC 480i 0 [ 2197.661310] usb 2-2: USB disconnect, address 2 [ 2202.160316] usb 2-2: new high speed USB device using ehci_hcd and address 3 [ 2202.312229] usb 2-2: configuration #1 chosen from 1 choice [ 2202.313507] scsi5 : SCSI emulation for USB Mass Storage devices [ 2202.313843] usb-storage: device found at 3 [ 2202.313847] usb-storage: waiting for device to settle before scanning [ 2207.310691] usb-storage: device scan complete [ 2207.311493] scsi 5:0:0:0: Direct-Access Memorex Ultra TD v1.0 3.07 PQ: 0 ANSI: 0 [ 2207.313251] sd 5:0:0:0: Attached scsi generic sg2 type 0 [ 2207.314232] sd 5:0:0:0: [sdb] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 2207.319285] sd 5:0:0:0: [sdb] Write Protect is off [ 2207.319295] sd 5:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 2207.319302] sd 5:0:0:0: [sdb] Assuming drive cache: write through [ 2207.324621] sd 5:0:0:0: [sdb] Assuming drive cache: write through [ 2207.324632] sdb: sdb1 [ 2207.327093] sd 5:0:0:0: [sdb] Assuming drive cache: write through [ 2207.327102] sd 5:0:0:0: [sdb] Attached SCSI disk