--- gnome-session-2.25.90.orig/debian/gnome-session.manpages +++ gnome-session-2.25.90/debian/gnome-session.manpages @@ -0,0 +1 @@ +debian/gnome-session-remove.1 --- gnome-session-2.25.90.orig/debian/copyright +++ gnome-session-2.25.90/debian/copyright @@ -0,0 +1,34 @@ +This package was debianized by Jim Pick jim@jimpick.com on Sat, 14 Mar +1998 20:12:23 -0800. Taken over by Raphael Hertzog + on Wed, 22 Sep 1999 13:24:34 +0200, and taken +over again by James LewisMoss on October 26, 1999. + +It was downloaded from . + +Upstream Authors and Copyright Holders: + Tom Tromey + Felix Bellaby + Ralph Mor, X Consortium + Dan Winship + Lucas Rocha + William Jon McCann + +License: + + This package is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This package is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this package; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + +On Debian systems, the complete text of the GNU General +Public License can be found in `/usr/share/common-licenses/GPL'. + --- gnome-session-2.25.90.orig/debian/postinst +++ gnome-session-2.25.90/debian/postinst @@ -0,0 +1,16 @@ +#!/bin/sh + +set -e + +if [ "$1" = configure ]; then + update-alternatives --install /usr/bin/x-session-manager \ + x-session-manager /usr/bin/gnome-session 50 \ + --slave /usr/share/man/man1/x-session-manager.1.gz \ + x-session-manager.1.gz /usr/share/man/man1/gnome-session.1.gz + update-alternatives --install /usr/share/images/desktop-base/desktop-splash \ + desktop-splash /usr/share/pixmaps/splash/gnome-splash.png 10 + update-alternatives --install /usr/share/images/desktop-base/desktop-splash \ + desktop-splash /usr/share/pixmaps/splash/gnome-debian-splash.png 10 +fi + +#DEBHELPER# --- gnome-session-2.25.90.orig/debian/watch +++ gnome-session-2.25.90/debian/watch @@ -0,0 +1,2 @@ +version=2 +http://ftp.gnome.org/pub/gnome/sources/gnome-session/([\d\.]+)[02468]/gnome-session-([\d\.]+)\.tar\.gz --- gnome-session-2.25.90.orig/debian/gnome.desktop +++ gnome-session-2.25.90/debian/gnome.desktop @@ -0,0 +1,88 @@ +[Desktop Entry] +Encoding=UTF-8 +Name=GNOME +Name[az]=GNOME +Name[be]=GNOME +Name[ca]=GNOME +Name[cs]=GNOME +Name[cy]=GNOME +Name[da]=Gnome +Name[de]=GNOME +Name[el]=GNOME +Name[es]=GNOME +Name[et]=GNOME +Name[fi]=Gnome +Name[fr]=GNOME +Name[he]=GNOME +Name[hi]=गनोम +Name[hu]=GNOME +Name[it]=GNOME +Name[ja]=GNOME +Name[ko]=그놈 +Name[lt]=GNOME +Name[mn]=ГНОМЕ +Name[ms]=GNOME +Name[nl]=GNOME +Name[nn]=GNOME +Name[no]=GNOME +Name[pl]=GNOME +Name[pt]=GNOME +Name[pt_BR]=GNOME +Name[ro]=GNOME +Name[ru]=GNOME +Name[sk]=GNOME +Name[sl]=GNOME +Name[sq]=GNOME +Name[sr]=Гном +Name[sr@Latn]=Gnom +Name[sv]=GNOME +Name[tr]=GNOME +Name[uk]=GNOME +Name[vi]=GNOME +Name[wa]=GNOME +Name[zh_CN]=GNOME +Name[zh_TW]=GNOME +Comment=This session logs you into GNOME +Comment[az]=Bu iclas sizi GNOME'a daxil edəcək +Comment[be]=Гэтая сэсыя завядзе вас у GNOME +Comment[ca]=Aquesta sessió entra en GNOME +Comment[cs]=Toto sezení vás přihlásí do GNOME +Comment[cy]=Mae'r sesiwn hwn yn eich mewngofnodi i GNOME +Comment[da]=Denne session logger dig på Gnome +Comment[de]=Diese Sitzung meldet Sie an GNOME an +Comment[el]=Αυτή η συνεδρία σας εισάγει στο GNOME +Comment[es]=Con esta sesión accede a GNOME +Comment[fi]=Tämä istunto kirjaa sisään Gnomeen +Comment[fr]=Cette session vous connectera dans GNOME +Comment[he]=תצורת הפעלה זו מחברת אותך ל GNOME +Comment[hi]=यह सत्र गनोम में लॉगिन होगा +Comment[hu]=Ez a környezet a GNOME-ba jelentkeztet be +Comment[it]=Sessione di lavoro con GNOME +Comment[ja]=GNOME セッションにログインします +Comment[ko]=GNOME세션으로 로그인합니다 +Comment[lt]=Ši sesija prijungia Jus į GNOME +Comment[mn]=Энэ суултаар та ГНОМЕ руу нэвтрэнэ. +Comment[ms]=Sesi ini akan log anda ke GNOME +Comment[nl]=Deze sessie meldt u aan bij GNOME +Comment[nn]=Denne økta loggar på GNOME +Comment[no]=Denne sesjonen logger deg inn til GNOME +Comment[pl]=Sesja logowania do GNOME +Comment[pt]=Esta sessão inicia-o no GNOME +Comment[pt_BR]=Logar no ambiente GNOME +Comment[ro]=Această sesiune vă va loga în GNOME +Comment[ru]=Начать сеанс GNOME +Comment[sk]=Toto sedenie vás prihlási do prostredia GNOME +Comment[sl]=Ta seja vas prijavi v GNOMe +Comment[sq]=Kjo seancë do t'ju fusë në GNOME +Comment[sr]=Ова сесија вас пријављује на Гнома +Comment[sr@Latn]=Ova sesija vas prijavljuje na Gnoma +Comment[sv]=Denna session loggar in dig i GNOME +Comment[tr]=Bu oturum ile GNOME'a giriş yaparsınız +Comment[uk]=Сеанс роботи в середовищі GNOME +Comment[vi]=Session này cho bạn đăng nhập vào GNOME +Comment[zh_CN]=此会话使您登录到 GNOME +Comment[zh_TW]=選取這個作業階段後會進入 GNOME 環境 +Exec=/usr/bin/gnome-session +# no icon yet, only the top three are currently used +Icon= +Type=Application --- gnome-session-2.25.90.orig/debian/gnome-session.install +++ gnome-session-2.25.90/debian/gnome-session.install @@ -0,0 +1,3 @@ +debian/gnome.desktop usr/share/xsessions +debian/55gnome-session_gnomerc etc/X11/Xsession.d +debian/gnome-debian-splash.png usr/share/pixmaps/splash --- gnome-session-2.25.90.orig/debian/gnome-session-remove.1 +++ gnome-session-2.25.90/debian/gnome-session-remove.1 @@ -0,0 +1,45 @@ +.\" Copyright (C) 2006 Sven Arvidsson +.\" +.\" This is free software; you may redistribute it and/or modify +.\" it under the terms of the GNU General Public License as +.\" published by the Free Software Foundation; either version 2, +.\" or (at your option) any later version. +.\" +.\" This is distributed in the hope that it will be useful, but +.\" WITHOUT ANY WARRANTY; without even the implied warranty of +.\" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +.\" GNU General Public License for more details. +.\" +.\"You should have received a copy of the GNU General Public License along +.\"with this program; if not, write to the Free Software Foundation, Inc., +.\"51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. +.TH gnome-session-remove 1 "2007\-05\-05" "GNOME" +.SH NAME +gnome-session-remove \- Remove or list applications in the current +GNOME session +.SH SYNOPSIS +.B gnome-session-remove +.RI [ OPTION... ] +.RI PROGRAM... +.SH DESCRIPTION +.B gnome-session-remove +can be used to list registered applications in a GNOME session or remove them. +.SH OPTIONS +.TP +.B \-\-list +List registered clients, then exit +.TP +.B \-\-display=DISPLAY +X display to use +.P +.B gnome-session-remove +also accepts the standard GNOME and GTK options. +.SH AUTHORS +.B gnome-session-remove +was written by Tom Tromey Mark McLoughlin and others. +.P +This manual page was written by Sven Arvidsson , +for the Debian project (but may be used by others). +.SH SEE ALSO +.BR "gtk-options" (7), +.BR "gnome-options" (7) --- gnome-session-2.25.90.orig/debian/control +++ gnome-session-2.25.90/debian/control @@ -0,0 +1,55 @@ +Source: gnome-session +Section: gnome +Priority: optional +Maintainer: Ubuntu Desktop Team +XSBC-Original-Maintainer: Josselin Mouette +Uploaders: Debian GNOME Maintainers +Standards-Version: 3.7.3 +Build-Depends: cdbs (>= 0.4.41), + quilt, + liborbit2-dev (>= 2.10.2-1.1), + intltool (>= 0.35.0), + libgconf2-dev (>= 2.10.1-6), + libglade2-dev (>= 2.3.6), + libgnomecanvas2-dev (>= 2.10), + libgnomevfs2-dev (>= 2.10), + libstartup-notification0-dev, + gnome-pkg-tools (>= 0.10), + debhelper (>= 5.0.13), + libx11-dev, + libxt-dev, + libice-dev, + libsm-dev, + libxrender-dev, + libxrandr-dev, + libxmu-dev, + libxau-dev, + xtrans-dev, + libgnome-desktop-dev, + sharutils, + libdbus-glib-1-dev (>= 0.76), + libpolkit-gnome-dev (>= 0.7), + libglib2.0-dev (>= 2.16), + libgtk2.0-dev (>= 2.11.1), + libxtst-dev + +Package: gnome-session +Architecture: any +Depends: ${shlibs:Depends}, + ${misc:Depends}, + dbus-x11 (>= 1.2.1-2ubuntu9), + gnome-control-center (>= 1:2.22), + gnome-settings-daemon +Recommends: gnome-panel, + nautilus, + metacity | sawfish +Breaks: gnome-panel (<< 1:2.23) +Conflicts: bug-buddy (<< 2.20) +Provides: x-session-manager +Suggests: gnome-user-guide | gnome2-user-guide, + desktop-base +Description: The GNOME 2 Session Manager + This package contains an X11-compliant "session manager" (similar to xsm) + with GNOME extensions. When you log out, the session manager will save the + state of all your GNOME 2 apps. When you log back in, the session manager + will restore your session. --- gnome-session-2.25.90.orig/debian/gnome-session.gconf-defaults +++ gnome-session-2.25.90/debian/gnome-session.gconf-defaults @@ -0,0 +1 @@ +/desktop/gnome/session/required_components/windowmanager "gnome-wm" --- gnome-session-2.25.90.orig/debian/rules +++ gnome-session-2.25.90/debian/rules @@ -0,0 +1,43 @@ +#!/usr/bin/make -f + +include /usr/share/cdbs/1/rules/debhelper.mk +include /usr/share/cdbs/1/class/gnome.mk +include /usr/share/cdbs/1/rules/patchsys-quilt.mk +include /usr/share/cdbs/1/rules/utils.mk +include /usr/share/gnome-pkg-tools/1/rules/uploaders.mk +include /usr/share/gnome-pkg-tools/1/rules/gnome-version.mk +-include /usr/share/gnome-pkg-tools/1/rules/gnome-get-source.mk + +DEB_CONFIGURE_EXTRA_FLAGS += --localstatedir=/var/lib \ + --with-window-manager=metacity \ + --enable-ipv6 \ + --with-at-spi-registryd-directory=/usr/lib/at-spi + +LDFLAGS += -Wl,-z,defs -Wl,-O1 -Wl,--as-needed + +%: %.uue + uudecode -o '$@' '$<' + +SPLASH := debian/gnome-debian-splash.png + +common-build-arch:: $(SPLASH) + +clean:: + rm -vf $(SPLASH) + +clean:: + rm -vf \ + gnome-session/default.session \ + gnome-session/default.wm \ + gnome-session/session-properties.desktop \ + gnome-session/gnome-session.schemas + +binary-post-install/gnome-session:: + # fix bogus ${prefix} in manpages + cd debian/gnome-session/usr/share/man/ && \ + sed \ + -i \ + 's#\$${prefix}#/usr#g' \ + man5/default.session.5 \ + man1/gnome-session.1 + --- gnome-session-2.25.90.orig/debian/gnome-debian-splash.png.uue +++ gnome-session-2.25.90/debian/gnome-debian-splash.png.uue @@ -0,0 +1,1034 @@ +begin 644 debian/gnome-debian-splash.png +MB5!.1PT*&@H````-24A$4@```:0```$E"`8```"KH)9(````!F)+1T0`_P#_ +M`/^@O:>3````"7!(67,```L3```+$P$`FIP8````!W1)344'U@D%%"XP!(SU +M_0``(`!)1$%4>)SLO5>7)$EVY_>_YJ%3Z])=JG7W]$B,P`(#S,XL=X8'Y^PY +MNR`_`%_Y/7CXQ'<>OO"!+^0A(79`2&*P,\`"F)Z>UKI4EZ[4(C(RI%\^F%TS +M0=.Q;AT5E\&(J/7/>04P<&4&XVL5C='ZW^V*7%T=N?ZPE9)O=;H6&4#]015?+2P,W9FG!:.N3XX*1@F%T]?O+LF]/QJE +M*ZD+'09&/'H#&8Q.D+QVO@(`&*CJ[!9+^&)Y1?O)D^+I#5,A@-)QD,,IDW-(% +MI+92^')Y&:!TYIS3(AF,>G]P:W$1C5QN4+'4)ST*&(E(DV4P&DXR +M&&5R%!(!TGZA@%N+2T^K+T +M(;E"!J/A)(-1)DS,X]S;X>VM_'2VBKNS3T;6E(&H^&: +M\8O=7%Q"2PV`TE.$$0"HD#%]<)"N<$+;&8R&DPQ&F1R'*`!8V=O#9+.!W6() +M]6%--B=0,A@-UTQ2L9M+2PA[!;8\91B)G-O9Z=6!OB<;!D84>_5K=X@N=+7; +MU39WO\U@-&P+HQ7*8/3T1`'`_;DY?+&\\DRL..^HNJ>U>IW%@Z'X:;$JPE/()0LEPB;^XBS[1,T9@Q=%3'/8;D<$H?:$, +M1D]'ILL!_M./7AVP*O*420:C],VD/=-G/I1.&(P`H-#I(`C#5"=+TE#\SQ@, +MGS`.&3ZF6`,C3&1+XHNE+7:O)"W,=:@;5'VUM,0KC!W)8#2P4`:CIR?G9@LH +M%H+!J8-.BV0P2M_,4&V"G#/+`DX:3`"]""^6*UVM6W-9?944>U'ZI(M[)4TP+%F.O;: +M30)+PHL3C*+==0VT6`!F6HR!2I>D+D#);TD]BOZ27C(897*<D@Y;0I!RBY!HKT)'*Z(>69A%'W +MO"!]W4R.7*ZOE/%XIP7F%-F^3[)D,$K?S&%@)+_>FYL?J=6CAI'(F=T]H\%1 +M9&1VYC<9ZKOAXX.'"+#^)'/`FMSDU<>CT_OR7'V2ESB96.MR;.''(`]24M\" +MRMCWHG"R>(MHB&FDSYB=ZN).-(Q&K9O)D8LBX/)B"8^V=/:54PND#$;IFQD' +MC$0^.W,F=:N)@]P1C@+S!P=N`!X`(4((>(._!0\1V$+'?"::E_#$P"+Z5YCV`4B/MDKFZL:?\+DB`D``KUI^1I +M/7#?*VMT([8!"?`UF0AQE'EY(.OQ.7S0A;HMVWX<;+X1+@8H$E\7L3DNO3;U +M/+->M[\I*AF,,GF:XT('1I3,D:%(%! +M[+<#`S+E8"6@LNU[VI2^^`B@6#1!`R9?<_)->A0#4P:C3)ZFY`/"I84B;CXY +MI4#*8)2^F:."DVMV(0$L"P-Z8SE/APB,`D +M\&$00@,-@0V\&9\^P+3J-BLM?8I4$101$! +MH0.8=[?,#W:_ZCN",%JBMV0PRN2(Y/)2"=NU-K9K'7OLU``I@U'Z9HX:1B*? +MK:P,*#%J9[JE"T3<#2)`'Y]N-"*F.*TDA6;`]K0D`R#M(_*BZ>*0`46NPS\G +MNZ:@$EYQ=U2TKX!%A(&<6T4+#U*AZYOI'T'9]Y%[(7ZG")R<65`N)4ECZI(, +M1ID'&DWKDV*D`4@:C],T<%XP``$38F)CH76)(G\MIWKA^*M!_I&@]^^;4$EF3,@0(N=S&F3^R!D"BB +M15FK8FBT-4^+(]&:#-PHXE!R8')'7/!#M`_=DL$HDW%(*:]P=K:(6ZO1!,DG +M'DBG&T8R(@U5?>0.'2N,C*Q-324G81W'*)`$(O&FF.]%'$12X4RU:LUQ#D)F +M(-=#.+HT'WD)C"!CMYC]D.(E!/..2?O>,>TV(I"*` +M9B=P8K+GD/MEP02&'W'H:TSN7IOKSF"4R1'+M>42GNPTL=^(IOTZT4`Z_3`: +MNOJ0'PQ5I&>EWM@'S[62YL(Q%" +M\$UM$B!@QND;^*Z91Q:GDM4/V"Q/3QI0&B)Q+`!71<\24*'"" +M@Y/U<7E@$E\4FPME-@N"&7#!#QX\8KT>[=NNS$PFD#$;IFWK: +M,!+Y:F'A4*.`A4Y/\UP?$"D/1&:L540Q@+CV(UH0=\/'M[[%K]D'D3*:2^(+ +M2<$-KG$+%;#U(RF!A/*U(W>SI;H%JL#2@U-$:V+W5FMR":8\N48V6E?,C"=! +M]/VXVWV7O-\R&&42DVLK)=S;:*#1[GY2)PY(&8S2-W528"0'[_<(!1\HW@`H +MYC7=)%L?4:*60\;L%89FX*6N9I?V]JPF9*U_\F'D]5P?'.>IS&1,MHG"9@8 +MLA&-->,I-J8_?=3I;/TD@U$F@^5Z;#&L+R<*2!F,TCZ*8:6ZG7';`DA0_9J`^*!0P?U"#=960:Y@\S +MC]Q@[J\=LI]Y21=L+CF;$LA9P1Q^I&FYM_IE-2?EF?#D3I"#E%5@V"A.Y/KI +MVHW"2<#$$7.>LK#S?4P@@$-SC\6_9&^UKRUQQ(27+!F,,ADL"Y,Y3!0#?+7> +M;:X#3A"0,ABE;^IH8#3B>6,';RTNIFK+#T807Y'\[MY3]'LAQ!#3'!'6)J=P +M>WY!^TU$8S`C]MWY>70"9;0L`9QORA(-R`.0!QX+'3@SG/BT(FF'G(H3>>^G +M$HJ&C2>%.D1-=^QI4^1%SP%.>S+VNZA93WGYZV(:DYCR9"&NCIF,$H^6!' +M*3"1<K'G(][)V=HI:XV"C,1='(8^OO1QCK39#TX63`*?)#`92@QZ[36IX:D(X,1H>I/Z!B!J/TG;FYX'Q)?LBU +MU9!\T'@V*"*8P=-H1YSX-=^)<_,";+FP&$E@]'S(Y.E`"\L%O'1O5K?/#Q\-'G%'1Z7N3(2NYP%"4G,@==G +M#V(]X!31FES-")B@C,8G[SUZN,`'";@(W7WQ[KTUL\IS"@%6[D%QM-E4WY%1 +M"V0P.GWRYH4)W%EOH-KH]"UW[$#*8)2^J=,*(S/&X>[<0A>,(K\3P"%;$YV\ +M!XD/PVE%,B2*R`#MM\>L(^MDD"VWVQ%M*`E"=N#V``0BD#+;40B`2&L51-K( +M%5.F!K\,3)+,=[YYS<''79^N+[O6>EXI#TXV(X4')FNFE-MF@"=*C^0C4LH$ +M+GB%?!.>/+9(VCTBH`,=["!;:2`=E#(8/5]2R!%>.EO&AW>K`\L>*Y`R&*5O +MZK3#B$#H!&Z+!-]G)#`"(P:CT)KHV)CKM%:DU]&\L+7IF:A,N^1\*&34@/UB +M"?#V-[+NF!B$1`L22`F`K-\')A0;XE-B+ZV/?B7O$IOPD@['U!.K^?BMRGN* +M`DI:<(N=1"M+!I.&D02"B!8I3\?K$KP)@)#%FO`8,%%X+##SOQ0AAH)2!J/G +M3UX[7\':;@OKU?;`LL<")&;.8#1$4Z<51O*3+):`K^;G>\)(_$6$[HP,=F9/ +M;L%FN=VQ[6KSEH&1S3*@S_UH9@8$1K58C&A#21#B&(0$0"0=C)CIG-DL<9=8 +M63AK%]#*9R'TAH#N!;]/$>`D0$K`:P'EKE=N!H&ZP<1D-2M`@XF]RI%DLHKL +MN:(F/-DR70<[A*)E,MGL#FFAE,'H^1-%.ICAPWO[ZVH+7E$5Z5LQ@ +ME+XSGK$G`B,0<%`HFC)>E!8C`@B[Z3@Y=)F1VKX7TUVIU02!,%,[@`*#8Z8L +M/0XKM'-ZB9TR`ZZ`2.!BC[OQ.$%3\G9R]&P`!`H:8;F4!%->:/#!!;J&NZ1;;>NUY&2:LNNJ;\&S]T#Q5;=(4 +M3:D7E)RG;(BO4@:C9U*NKY31:(6XM]D[U-N7(P52!J,T'PQ5I&>EDP"CB"E' +MCY(@`!L3%=](U`6CN+^(2$Q]GB9A/K^\N85<)\29ZBZNKZ["[9**B&GNP=P< +MIAMU2#HA!QK77F1-D:_]P`W4%CHRM/O:DOG/C[2+OMC+7.=`9H'`#E;PLT10 +M%%`N))XL.,G\(V!R[;,M9S4QL[I6`&2UV)BVY)Z;RW&GBTEH.,#&3!B'D@0Z +M0!D-UH-2!J/G5[YV*;UV!!PAD#(8I?E@J"(]*YT8&/D#G-65&!L3D[:.#R,F +MDZXFYB^2/7M\;4O6Q(`(US;6[+')1L,"Q,*+@%80:#\0L]%BG(9C533R(&2T +M%44F&@]&2S(K9,GON]]>PLLNSO7-;-Y+PL8C6I=H:J`HH*QY$+8@]0&3O<<` +MQ*/$\$VILOF?:)1LS9YD*0/8[3;,WP2Q@M64$J"DS9<^E/3SZY$AIOM+--Q' +MF9P"N3A?1"&G<"-AWZ->S\S:=@5"\L#%5\("`)G9QT`!P&2-(*]? +MR3?++FI-NE\LU)('2.9K(OB&NT;3MY`=,!E>QYR5S94W#;"Y1C;G)`JMJ9!# +MK2WI6T`.8.1N+9MG%+U$@H:27K2LP-JG1`![6[^+N<]N$Q)O)GY3AOLHDU,B +M;UZ4,Q@&H`1DN>T)XV5W4H%*WN[]GPRY1>HD#(@,J?S37F^1B%A%:*D``![ +M^WQW;_D=I9$`SH'&_S5FXK*`@H63^'_DNA@RX),#$X`07AH@J6S!1/86RK-A +M8B@6'YY^#S89&.1<[$T@6!#LH$3$)F.X"W@@(H0>E&T>O:0O48)D,#K]LC"9 +MP])T'G_WT=90]<8*I-,&HV*KA>6]/92;S=%;2E%ELMG`BVNK`("#?!Z/IZ;1 +MR.=/-8SD=VM6,S]DL)1!7J\S(@VD:A4,;4AR,((U.?DPB$/F%F[&_T8G2"'8J>#9A!XVHW3ADCIJU`05`D:8,M+&C=S6@FA +MSW<28.1FO%ZG/'C`F&[L-@D,=(B0`[HTHRB,?&V"['LVHZG37J0L8;+91*-8 +MM.>6E#=$P..9*2S4]O%X>AH6='"F.!=Y9B!D&E=&:0L%7!X9E!UU?9IX482> +MA+`CM*=):8U%?#Y6__(N+(0&A6U5UEI!PR4T#BT!D\":33NB5(80B#@BZ.LQ +M)CRE@:8H-&8WT]%0,G]W0TFW83!&ROB@V&J_.NNXJ6^SA)NKYMY?MPQ&SX9, +M%@-<7BSB__S7M:'KC@5(IP)&S+B\N8EBNV4K'S>,XE7G:S7,UVJH%HIZMU7J +M'M#BE4X4C")F*&\X-LYM[3S7F3J9@(V)22Q7]P;`R&E-TI28JF2T)G=*`,!L +MXP";TU.>M@4;;58O%#"YLVN!XH,(<)%G@(.0K$UB&/B0.Z\=V+UGY7\:OU^* +M_;4_3H50YJ#57N"B#4,PE,61^4S>^6`*39B!(A"[G:3@;J\W.8`N8^HR*VC# +MFM82M99E`APL>/I`"0"Q0$D'?X1V,@*K'9N;"(0>&!,D@]&S(V]@/[ +MC8$A+5UR:""=!AA=V-["1*,1J?BT8>3+9+.!5U:?]-:83B",DOQ&UI1E%Q8I +M;_`"-B7ZH`<]K2\%9B,@MXVWT79,P7HA[P4G>%J2 +M]Q((Z;YJZ"BO4)?V8R'5_4=GT$^4\)DL!*L4<:HTV=FMM[-1:>+)=QYWUFIDCD#/AH=NO9*/E +M##@DV[I`26"L-2]SOUF99\_NN#7WR>,SNK0Y61Q+&8R>'2D$A)?/5O#S=S=& +MJG\H()UT&,WO[V.INM=5<5PP:N9RV"\4T%;*O`(0&$$8(@@9^4X'$\TF"IUV +MJK.)QG1O=@[[Q6*//O?H3+HN#ULUL5AOOY$;Z65\$R>Y!8H?V@V7+ZW+3-<7 +M1J:\.:<8MEQ&`3]8@;$Z,X/%:A4;D]/6)J?LN4WF-X$0N0':78_S*^GK]L#E +M@RK*COA'W@%][6QO%ADMTH_N3,A@]6_+*.9TF:"-%FJ`D&1E()QI&S'AY]4EBQ>%A1&@KA=6I +M*>R62B-WRB]2:39Q?GL;BL/XO!L`<'%["R$1OEC4.Z2>%!C9F6UD%F]=__I? +ML^['PB@2*LUHY@LHM%L8"48Q,Y[]7"DH#LV`#J^,ADI'*U9VUS$ +MHZ\)V?Y8"+$U2;G/$TQ//HS@_^(7%97);*L.!W=S]^R]TO$<^ET(QL)$`7_X +MQC*^]L)L*@CYLCA=Q$^_>19?>V$&_^O?W<+>00<4NMXR,51(")4V`T:A))J- +MP;X)J``S%"D-*',39>&L'WG'$D$!F#;EYG`&HV=,%`%O7)S`+S_;&;F-D8!T +MDF'4I15Y%=/"J*,4-BH3V)J8&%QC2!@!0*U0P)?>KJJSM1H6]ZO(A<[\HT+& +M*ZM/\-7L'&JB+0USTEZE#J$9)9GJ]'&VQVV*&IGQ&W.>1+4]F9K"Q>T-3V-@ +M&7WUD2%@1&14FI`Q4S_`3F72:D6NGO[9"0+GTS*G%:,A2#FSG6>6TIJ86QL% +MVTV.`#3B8TI6*>V@+.N#'-W=OJO6'"?:(PA!0/AW7S^+[UR;&QI$<3F_4,'_ +M^-,7\3__R2<(O0S?^MH9BGM!B<`4&C\5K%;$(;MH2`;8;-IGPQ+E7BA=QJY/ +M0BSJ+I-G0JZME%%OA;B?,DU0D@P-I),,HZOKZ\AW8JKB$#!Z,C7M%K2F.?<( +M,$J2[4H%VY4*P(SI>AWG=O0,@QFXM+6%6J&`N_/S0[0X?ABYP2/!5.?M6,IF +MP#?,TL.M(NL,/\A+^+4;=",!#'+A/6`DYBM_MUA2A)EF`SL3DYZIS0R*I,?# +MN_,+J#2;J!6+4%8Y<&8]P)FEK`9$@"P@%=6*#'0O+)7QPE(%DR4=OK]9;>#3 +M^[O8.^AAJG!-@F7?5H);L^6-SI(S;GZJ@#_^_D6LS/;0S$>0I>DBOGEE'F_? +MVM3!$*%,"-B9U534?(=0C)QL'JIH/&2B\>1Y*W,]$G"A[VG($FCB3(^9CO3L +MR9L7ATL3E"1#`>G$PH@9+Z^N=I=,!2/"ETM+"!,6K?8]]YA@%.T*8;=4QFZI +M###CI=4G(-8FOE<>/\9G9U92-7-D,)+9L)BQ`,A4UV;K-@.6OX^0]8\`8`KL +M6'9\[R'@)&(-L7((&ZBZ@`;&6?]05XXMVY4(NKT"$2D4RP%%@1F*/9R +M"Z6%4;58Q,;D)"YO;NC<;@RPR69J^V&CV(`@#"TTR>@A`DJGJ$4A)+`$`7_T +M[?-X_>),SWNDB/#CMU;0[H1X_\ZVN6_RC[X0$Q`(@:08Z62]$H%P>7D2?_S] +M"\@%1Y-JI0:8*2)-4W_EF"45L%N+&TC-L+BR<71IYT +ME,*-I27<6EP$`+RTN@H5)L?W'P6,K'&-NN^FM;#9$=TI4)'T0=KF8P?\@T+! +MM^E%%KVFUXP(4ZT6VKD`>^4R`$*QTP*1V>_(^(44W'JHCV*+=P-MM-*`&5(B@#X\E2#O_Q +M^Q>0/P(SG2\'S8[3+S*Y)1)/B!\Z\HD_O7&[J&U(V``D$XJC,",ZR8W7+RBM8AX+6U6)O#YRIF^ +MIJZ!YWZ*,/+ER?0T/EM9P8MK:\AU.KWKCL5,YVM'HLW``L*:[*!<5!H,:"!! +M`N)=,*8=)M2*)<@5F^VH```@`$E$050`*#XF`'9?'ZM-231=!$82R:?;+[;: +M(`(>S,YALMGT3'0,L`0IV#`"S-8/C`;D-"(!$8@-A,B"))=3^.'K+B(RK9R; +M*T,1(2!W#AF;G5:F+U8`]>^_<1:5XI$DX(_(X^UZ)(C"AQ*#NZ`D*>O(9'.P +M]CS)D.XYRNQ&A69QDBR89:^./B79+UBF)9U>^?H+D]C>;^/NQNB1=2)3E4)O +M()U8&`'=:XQ,18X?`.'+I66L34VE:/7DP\@*$3Y?6<'9W9WDYS0FS0A(T([@ +MQA592^,BM,Q=5QZ(O(%78-$H!*8#GI8$9^:S-BT;'.'#R(NR`^%L=1<$1J-0 +MP+8)TU=@`,IH.B8_@=)@:.4"$"L#!DX`D=;81(.YNC*!0GYXC>7L7,FVI\SU +MN'8=]`10KUVBP$!)AYBP?>;R.P&>IN-%)UK3G;D0 +M.&"Q>4;^@E\!'8!,2SKE,ED,\/J%"O[EQN[@P@-DHJCP[=?.4>)?VDF&T=4> +M9KHXC-I!@,]75E)I17W/?=)@Y,G=N7G,UV)AEF,ST\6THU"&&LFIYLQG;LV. +M'WDGVI(SU=E11U/+!+?%@QAT`9+W-G6"890'(Q"0[W3LN3MB4F0$A\13!BW`Y&OO2@"7CD_1/);3Y:FB_8^`LX_1L1>'\D"Z@=#F`0/ +M(R$SWKFUY3;I(V_+:B^SPZ@;A +M7*!P=<7M=CN,=$*&4H:[1DL*R#LG'*"N+$]@?BJ^^/EHY+/[N]C<:VB-R&JO +MRFUWSH`UIQHM,\ET9Y^Q)Q+J+QJ3V^X=J;6D3$Z'+$_G<7&AB-_(`H +MTMK6_2=['#%8GV08@1DK>S'5,`%&=^?F=1172CG-,!)IY7)CAY$&CTGU8I44 +MEYW!:4>>-B0/A&0&;$3">V7'5R;SWIL7B\G'PD[,>6;&#=A9O:.D[L?YG6W< +M65J*P$@#E'%IL8*7SDUC:::`9BO$9P]V\?#V.JK%D@60F"-MN#+IB+.)DAIY +M'5"]%3H$*[FG9&^N'=*9\C#KD,*`>,G +MDI!PJ\Z81R-8TA,/2,R/YG'02M$O=EVZY!.-(P`N\&=7S$.H\^75^Q@F$:>!1@-TYGTFI$9 +MF`R,""ZIIG;MZ'QU,`LF=?+,T&9DZ#H3NV`'T;1\4Y#,I.6A1OU&%'VD!D9* +M0O/@UAB%2ED8%0+@)V^=Q3=B@_TK%Z9QX\(T_ORWCQ"&PD`9:"7T60^@AUF4 +M6F^%NH_V%LAZ*P#'>HLI3W\EW&)9>/<`UK3G!\!DXE0>NS5MY3$+!DXVC(C9;8IF*L9A='-QZ?`PXEX?I*B;LM))AY&4E9U! +M`;.;1)&E$[5"3S2L>3>3DRJ!THM@W[ZUA\[AE2/D`\)T*7;MB +M#K7@X3A@!`#7UM,PNK6PB'80I&[ON`;V>*73`".I(,$,;`"B)[%F@-&C +MC#;%V,]D()&!Q>5&(QF8X#0?9ZISH[9=-.GM%R0!"S*;CRA+!,C"E@",B48# +M`3'^^`<7L3#`)_/-JW,H%5S`@[(#M#Z#4D#Q$$#:.VA!!;I[?K"$,@$5B@C% +MG,(K%T8+FAA6-JM-?')WU]U/@GU.<(_`9E00+8DD.B$D6PZ`>YY*PEP"F'7)O1J#K)I!`%EPMB`*"S@GN:!@"[AZR_,8+J2'WB=A9S"MZ_/&Q`Y +M+4\'(>@_C`Z//C@^W#JP4716.Q)=Q(S7B].%(\E5%Y,P6IN<0BO3C(:KFZ(" +MD]L2P9EBC)8CF^"9K`P^>"0;M-MZS@Q4L@>.!S"[4-(`SPY#H?%+=9GJ8K-I +MZ(&3[`!)6)^9Q@]>3;^(]8U+LC^2F*MD:%901-C>;PYJ(E&:[1#K>TV[(%:1 +MO]C606IN(GWPS6'D'SY>P]V-`Q?$`4`TV+CISN+*4W)(RGK:$^!@9+5E;XIA +MS;APVK+[5I&;8$3,=K#?P4Q/.GGR[2N3>+#5P..=UEC:FZGHL7N[YB*GAP;2 +M<9GI7EKSUALEP*A6*VZ]HD&0P2E>![:]L_3T"';M\D4(S0,%,=3W0R(GM +MX.+-MGWMB%TA:XPCP$_V%C756>JYP1).JP(!A84IS$P,UHY$*L4<)DLY'9X- +M";A0%H+M,,1^??@U%H^W#LRE:*W(+I!5Y@6]0'9V\NB!=&=U'[_Z9!4*-NVV +M#2)Q48:BSJM&0&$>W/S7?6&.G<&HQX5 +M)%BAVUSGG._^@.:&*#'MV.%)%D"2/P,WPYDW*+)WPW1MK?FPF''2 +MKC,1ROGTVK+(LMEKB$AK14JQ,]L186L$+>G1UH'3C)3NL^FQA1$=@X94:[3Q +M)[]^``MU9GO_(<,^:XW0/35E-4Y/&;5:$DNT7,QDYS1C]W+UR9KM6+3:S&QW +MJN2[UZ;P\8,:=@\Z@PNGD%)>8:H48&TWJFVE!M)QP6BJ7D<@B4,3801\OIS. +M+.-F^Z-UZ'F#D:?+>.\]CJ=$+<6:M%_$:* +M"!00`B4*H&Y[=@AM;A3YS[]YB.I!VX*G'23HB61=P)GMO.#&[K,=B*9V>Y$R87Y(I:F\GCOSGC"O`'@[&P!J[O- +MKH2LZ;:?&/G#X0?(R8<.Q"9]I*T([?G3L169P98_3:'SDA9LB=+>0U8 +M3RO200W:O';CT7!_A%\^KJ+9"J-9("`YZWSS'3!=/CH@_?K+#=QX6`5!Y^G3 +MCXRA<_O!;AGB(B!=4E2G(47-1A9:G`]OI3-QL!_0WVT7`ELG3%@+P +MO>M3>.=.%/360.FU1X^WNZT/@[>?&/G#X0?(2YN;MF(2C`!*Y3?*8#1< +M!;]NLKE.'-9NUBN?"S*+)VY,V%#40FP,++>"\FQ1\#>01M/MM.U&S+CTWN[7I"$-@,&2O8^@J3P`Q&A +MT1[#0HX$>>_V%O[N@R'W^M(9&6F@-V#-AKM[B?K/DLV`TS44>Y%UIA(BVI%-O&:"#\3\!->)W5H;M<:000CD8*1,N]ID9_JK +M@"\?I7/DWEG=1[T5(E#DO;[2(>HL1H.XY\?S)Y.C)9 +M"O"=JU/XKU_L'B9W0D1RBG!^KHA[/;:KZ+W]1+]6CP!&2]6]OC!JY'(#%[\^ +M4S`:[O0C51A`'S0X^_&K'@8RDOVQ-=SK< +MV\%I]V"\0'KGUB;^]H,G]KZ1,N94N4=B)O.U)+D/HJEZU@B6XV#O#LND@^PS +M3C;;N;:2HNWE%)D]+?OC*#+Y\?("'"::U4>7B0A&;U5;/''C) +MVT_T:_$(8`0`\]7]GC`"@#L+_;6C#$;#54BJ:^W_#(!#:SUQN]7HP212EPCB +MW';#D3/729&XN8Y,_A@QU[$=``&Q&]J9N.?(X+AV9$Y#``IA![<>Q[;C&"#M +MCBS*U>\E1Y_XD@+H'&^__&0-K1ZY4CHAXY\^6T>CU3%^*#81=@2EE`,1Y+B^ +MIKV#PZ?M%WGGYB9^\>&:-9WI7'F>EF0VRI-<@U9+\L`NSXQ,0>W+T\^BRVP' +MX4:RV2[^#8N;[<2/Y#W";A]D)D]-WKA0P40QP+_>'-\BV%)>87$JWW_]0*6S\V@T6CCQL^_O-`U/^8E`F`EB9@5W?VVI]/!K2VSV'T;P$C*[%3(Y1 +M9LH!OG5E"G_Y_N98\M6)7%[4ZXY:?8(CHMM/]&OMB&`$!BYM;?9MZ=YL[_3\ +M&8R&JS"XKANE[-`C9C>38TXT&O[V%[[T\ +MV-\(`)O[3:C8OC\1&)<@'NKA]@N_88+Y^;PL7%"JKU%CZYMXLGVPV0"LRM +M\N^PLEH(,1O@D]Z"@0A/MNMHML.1TP?5&FW\XJ-5?/FP:O/1AJ*9DAY).#1: +M$BN$;I=%2`2EX%R[D,PQ9DF%"H&NDU!$8NV(#-'HG&V.H_=YN8#E$HQ<17D-Q":KCO!NE]J-A?CY19[YZ*O/7" +M!`HY&LO&>[Y<7BSAWD:C:]U17&2)0F\Y8AA-'QRX`PGR8&9VN/-F,$JLD$XS +MZO.)OSY)-LXQYK)(=H;X2-+UUOF/0C.26JV"@4(AAQ__A[=0+/5>HW/^A06\ +M_JU+$=^2U;PX1.N@@=_\^L[`*WZR74'];OIR%G#Z3N.;IHN[CNY\H:G<=\/;K]2!(VWOO[U?6= +M$1$BE6,V>K.+.J'PV_4F/KJ[T[>-#[_:M>`A`,KT0;=`$1AI+4AI`!$L9!3I +MX30`D".WWBB0W\UG`BKKIU*Z[YV0\:M/UP9&\37;(3[\:AO_US_=P_VUFMVA +M0^8)`)L]IV3[=X;-P,#H#@%G08Q^(K)=%46>B2<6;/``GA85R>N1>@4V1"(P +M,SD6403\P:NS^/#N/M;WQF>J4P1<6BCBSGJZZ-?>-HUC@!$`$/?VFCV8F4E_ +MW@Q&B172PBCI[Y_MO\Y9$W=J]PIHB#SCB-'&;]\,;+9-PMD+Z7(4%DMYO'!U +M$7>^7(40CPE0%``(T[%U-O[3=Q=WS=YY51DP%36G^5@ +M!&BM2'GV2(+;5MT.UM$+!X?ZM@2B7"J"8KV5-Y0"PA"-5HB_>>\QKJQ,X/+2 +M!*8K>>0#A6J]C=U:"[=7J[CY>!^M#EM_C/7=A':8AWP8?Y9B)`MCST">E`M` +M@,G4@6X_$J(&U[@?23]+[]D;;2G+2G,E`.B88+5;[AQ36BM%-UC(8#5?AL&8Z,=I$#@PAVI$OIB]RLVP[^'EE +MS<_%E:G4[;_X^CD#)+_?H8G*)(0,_/G;#_&=%Q?P.]?=SJP[M98.D?:T(P)L +MY!Z#S7HAL0@J*`,CO4T[.Q#9J#R.^H\`@!FAV=9=-$[%0&B")C242&^Y`<+- +MQ_OX\J$.6^^$(=B`*V08C8@CR[WT%NS>A((I\I@DFL]M`Q']V2]@@`U=!72^ +M'RE)DJ<<_3^UK7$6:?0C@E& +M`&-AOW +MGS*W.(E2I8!&HVTU'(+"QL24'W,3-QWM8GBYBLIS#9P]VT>G`^GHL +M2%C\/\[$I#4B+QDI,Y0)QK#)(XQFI&(7'D*;[1BDX0&]69Z&DFX[M.N]9#V4 +M&?P%/*Q-B:'NGJ[+!)O\E#4@(5J7/Z@3+`S%;&?OM'W6T4Z3*>SCJZ_$P_R- +M%;`[TL[*/09Y%ST1X6W.2Y#R3@@13ST2!*<]< +M*\UL;]5P*4T?C"RN3./!5V;9@#)S>#_JS$+Q +M:0$*2K0?LJ5U.X&G+9$$`)CK82`@N[4=H(`P)&.E8ZB0$9+Q5I&!E/3#W`S9 +M`E[&B\2IXXG2K]MTR'?CMS7";/AGS[RA2:;<8'=X=; +M4#Y(*@6%AA5]UB +MNX57'S\"^OCL#M/GH<2,:BH,$8_=VMD8SH:]L#1I@0@&-B3Y+IEH/B87`."9 +MN_S."'S(0D76(I$%C3(PTGXJ:.@9;09^8`/9FYH0.3F"'*:%C']' +M(V=F\GCE7`7_Y=/ML=YC`G!MI8P'FXV^BV")M+EP]Z!MR_5?J&%DW#`"L[?V +M*$GT7UL&H^$J]*M[=5VOY,^%86).0']UOFTLY2C2J^B@ZBITZV$D!NSNS34T +MZJV^8=^^S"UI9ZRH$?O%8I?I+-(GL;%!S&UD_2\6!N2&8!UYI[^+@8&6^,)L +MAG#C7U(!(:],\(,`RIRHU0G1;'70Z#":S8XVRQDHP&A6Q.+7$=^/Z80\6&>I +MB]Y'8G3,546"'#R)I31-+6GT*&?03=EFZK5(GA:8R5@EIPB__\HLWKF]AYTQ +M;;HGJNE_C5SW6,9V10[O#V*M' +M8=@72$ +MQCX/(_5S&HW=F9PR.3=7P(MGROB_WUX?:[OY@'!]I8P;3P[ZFNJFRP$"`M83 +M@BAZ`NDH8`0`I?:`15<,'"0E4SW!,$HL<4)@!'#D?H;*G]DFM#V$F2ZU)/2Y +MWVD.]AMX^U4MG*ZF2,*;YO)RBG!NH8P+"Q,X,UM$+A@MU]RP +M4LP'>.G<%%XZ-X6=_1:^>+2'SQ^DR+9\7)I1)J=>BCG"#U^9P;_>V$6U/EY3 +MW?65,M;W6MCNL^9HHJA0RBNL]L2ZF^*=>*J@#$:)A8?MW;Y99!PJ=6C3XJA#=;^ZT<_TNW_YAR\P/5O! +MPG+OQ;+KFX/#53F$V48")D!!8L@8I7R`5\]/X^7S4X+^/!>?$\[)_F` +M,#^1Q]INJ^_BV_3;3_23E#`"NGT8\>(=-=QT.H-1^M8?3<^@W0?XLCW"<*WV +MZ,V09KHD:;P\__&]>Q[E+R2F%;M:>>'8BCS=?F,'5 +ME/_VELD1V#MJSL06')VP/CLS3+8BDQS*;AG!D#5H +MV1+8DR%7ETMXY6P%?_K.>E__SK`2*."E,Q7<6:NCWDJ.G"X$A(6I/#:J+;0' +MI()(M_U$/QD"1KWJ^]((`>?W]_%!1#:*H#+&J#/G'3^ +MR5(.WWMY`9>7*D,D!ST9\IUK<]BK-7$CMBMNZ`W];KGL'??[R-W3&'>%]=*J-:[V"M +M1T+68EYK1AM[+313@#`'C`M&([224*5:*F8PZE'X,#!*8Z9+V/7(%DT]I*74 +MC.;V:S)*`3W*2`,<,G[[3S?QZ;MW\?*;%U&9**#5[N#CW]Y%>WH.#Z=GL%2K +MQJO963L1(5"$;UR9PS>NS!Y;D,*XA8CPP]>7<7?]+AK-MM90NA:0N4?@-H'0 +MJHQD6F`OI)S9)84*#;]DV_)Q2H:4IR/%/.$G;\SAO:^JN+3%[.6"PDPYA[7=P9J12*J%L8ER!#`"@/U\,?F#P55351IBR$Y7XAF! +M$9`\!`TZKY\JIVL=H\F!$_?=`(R9^@%VRF7,U!M(PI:TX1^M'[3PP=MW;)@V +MD0(SHYG+&8W+[,C*)@>=X<[EI0K^S:M+F*ZD6VQ[DB47*%P[,X%/_*TU1.N0 +ME!2A,9GQ(,->;W'[&3GSG-S?XX9+%HT^FA`!__:U.:SNM@:N"QI62GF%RTLE +M?/)@/]$G-%%4F"H%6-MK#K4-^FA3Q1%A9,TT?:IT^3BZ3SV\9#!*U1@#$9,* +MP_W#)DD=`=Y,>_0^!\Q8+U<0_289.Q],_K8^&\,!T?V46D$`!J-C>\8(%.$G +M7UO!S[YU[IF`D]E.F`>''FF/=&$.(1S!D6EUWV/6#IM +M*G,Y'YSV)?J9^R)E/D=V(+'K84ZM,P&XR0I#%R"56)T#W2 +M7?]EYC-^X^'S(==72GAQI8P_?6N1*&8R&Z$B_,84U#BL``"``241!5,M+56,3<'H^ +M#)WM0&-,AAT'-2?E9A.;$Q,H=EIZ+R#R9M8L^"&$"+U$GPEF/=(I=0B$MLJ! +M.@P*""\L5_"S;YY%J7#RPKC')8K(Y,EE.W`[0UOT9]?(8"@C3TI_:MX9",6_ +M!1S[&9T@F)^9$G0B9'$RA]]]:09_^]%65VJ>P\K5Y1)R`>'3!]TIA^8G2(>$D9[(CO:-S6`T7.LCPPAZGQZ[_8(QGT6W0>UNNF\LE,<2B7O+ +ML?XC";A[T(OH01)EQ0PHUSZ1F*;T8!R2;``(?.O:+'[_M:53%T$WK)")2+/? +MX6XXO0)A8S#[>;KNG_R,(GR93#V"OI7(43]8;]4KA9NCN1 +M-A41NC*_LRM#H0RVC*]=F<4/7U]^YF$$``AU\(9\FUTV;W+O&2[0(>(_XJC_ +MR!-FIU_99VH#1KPRGJ]1$L%&0!,QL_:7B,G1]BUU]4R,*`+^[>NS>+S=Q(?W +MQAO$<':V@(6I/#YY4(OXA10!2]-YM#H\E@W^!@-I3#!*79L9"]7JB&=SE7K# +M*'43HU1-B;O>[3Y5&,'WUI@ILPQF;%X)[=JYKQO'/#^YYW2W)CTMLP<'"/V% +MTJ*1>:)W5)7125[:"!C"F/L(>/'L)'[RM?YIAIX5"4-&LV-,,3*`0P9S?VI@ +M-,@0<"H2V\?J9@.ZG/4?B?;$"3O*]@IHZ"GF3++EA`6._V7I'[F7:5#IY'O7 +MIU'($7[Y^7B#&):F\C@_5\`G#_8CBVJ+.<+*3`'[C<[8MK`8&-(V+A@!Z!NP +M(#)?JV%IOWIJ8324'!6,AJ1B?-+0%2HL8/%V)I4Q16LQCE7=0HDS:S"`D,U. +MI&P\YAP9L,31+67!85<;S(SS\V7\T;?//1^:$8`'FP>HMT*GQ["`GCPM-QI= +M9W17/2DP$X.H_PC:1,K1U$KZ`U?6E7?W6MC2-\(NS=HFLV9,?\$(T1V',^DG +M+YTIX^IR"7_[X?;0D6W]9&XBA\M+)7SZL(9&RXT+4Z4` +M/J1QPRAE*\O5O0Q&0YZA"T:C=\,>9#/"1"+MO#%%FX+(\^=XRE0DL,&5M]N; +M`W;7TWA?7`"#@%'OQBKOK2/>^+IFIDOX3]^_>&H7NXXB-QZ;"1NS]1TQAT:C +M$3.;IZ5Z\-9OY4,=11*:9^AG4(A^IYS_*![W9LMW?9\Y4L*)@TS_"+L1;\YS +M*$O3>7S_Q6G\S8=;J#;&%\0P50IP?:6,SQ_5+'2(3/`"@">[S;$'LB3_%1\! +MC/3QP?.=#$;#G6'L,)+CUD\$.W#)3-<-7*Z\,\_%_4C.NP'`FNW*S9:=.',8 +M?X#.-$B(FNV8&?OY/`!&KMW&3[]U[IF.IHL+,^/6XZH&B3&SA7"*9$0[,@C7 +MGSE?G`M7@)E!]#+71?U';A%T?_]15%SHN#Q0)C/%Z:O)Q[XWF21*N:#PDS?F +M\)M;>XEAV*-*I:#PRKD*;CPYL.F&\@%AQ?B+UJOM(XFJ[-:0C@A&T78'UZ4P +M!`]8).M7>C9A-,2G"47[W<-^+2=.&SR['!O;#(GM3MKTW$[^.4@&(`"A,<6= +MW=YVFI6?OXY"X/'+ZO0(,S`#8<&\'+#8:##R@>"+^(T\[=L\_ZA,2LVPT +MAYVO]9+3W&PE]/^29H)``3]Y8P[W-QOX."$,>U0IY@FOGJ_@J_6Z#52H%!1F +M*CEL[K38]MO5C_\GG5CF6 +M%EQ[OGD0\EX^\;3JN-_)TDP"&A+\1U(JDVY1I&'4[C#^<8Q!#/F`\-JY"3S: +M;F+5;*(W6\EALA1@=;=YI#`"?"`=,8R&K9M+VJ8BH5(&(_=K?&N/)$TG;;\9 +MWBP;B)KI_,`"0)N"(H.('MY\GU$(MFMCINIU_1<%#8:\LUV`JBP*_P[-)!A,T`M[>YZ0--: +M$BG9(, +MZ(1OJC=.N?VDBK]]_W$7C.2VA!3J``>CSMA`!A.,PE9;"NVS\GU'2=J1.>#" +M(R):LBU]77LELOV +M/3'C_NQLRI9[GX@!$\EEWHLF))%9$;.='@`YE.@N/?,F<8J'NO[*WIYM*SX( +M27"#B^2+^I(:^0)",-ZX-#W,%9UJ>;!1P\_?>81V)ZX9Z9^A[S>"-M5%[Z'Q +MOP%@26>K:66?D5_"UXY"CJ\]`D!L`E"ZH^OLQGJF?-1<1^AIKLO6'Z62;UV> +MQ.6E(O[?]S9Q,"903!8#O'&A@D=;3:SMM;`R4T"CQ5@[)A-=7$9>O#$*C`"@ +MGLMG,!JR]7XP>FGU"6XL+D6.7=Y81SU?2-'R@&X8+4;,=O#-=I(1E0A$;H04 +M+\>7$"KYZOX"_?WQS;6J/92@ZOGJ_@SGH=K4YHM:)Q +MKF4:5D;:H&]4&`'`3JF$Z7H/4,>-)`\["`P`(B7%E<\-\H-Q9&)98-H"!Y7QD]`*% +MNW/S`("7ST\-!ID"BX*+AJ^8,4`2N][Y)ZQ^*:X75V/4H8"TF%A +M-*S(.IK3"*/!=0\'H\EZ'6N3DYY6`91:36R5*^.#D3E"8NQGP,9R"SQ,1@?V +M/[8#BWZOD0(HZX\2+4E9'Y+CDD1R"=<(;:705@J*&0M3S]Z&>R(;>PW\Y[4)'[S92>;Q@!P+F='7RQXK); +MO[BZBES8P2=GS@X\>Z^VDTYEY[[6%Z0'&8+29CM(#C78O'9V-F[V,"(FG-O> +MUMJ51-9UG9'LS-R&DIO!]^[<+(@)I8)"^1E-$_3I_5W\[0>/T6J[0=KN5V3O +MJ:3ST0>3-2/G([(PXFA&!KVG8FCJB*XD1E;Q_T2U([L[>EP[LC-K-PD)?2J1 +MVYO)YJ[S%\/*7WGH)CV9=@2?[>#^9F-PA0%"!+Q\IHRYR1QN +MK]:QMO=T@A8&22H@C5LSJA:*F&[4!U9B!F9K-6Q7*L.=M%>I9P1&`+!7*B+? +M:6-E=P]3YE[>7%@<>/9>;??KE4ND"F>[46)B(0,FV,&$C+D-K)/E+NQ7K6;E +MYB'B'PIM##(I>&8A7;@3*'1(`QZ/N-)$>XB:4S_PN,8/D46O`10$:E\G)#]?8=B0(= +MUXY41#NR&K:MH-O+S'7`XE0>_^[-.?S+C5W<7NLS3J:40`%O79I`*1_@PWM5 +M[-5/((F,#`32N&$$``]G9S']Y''?2O+E7JI6/2!E,!)Y-#,+%89HF8"&9A"@ +MD4^1N2"AW=1W548LDMQS9+:D"*V91R*KEG9W,%^K@:R6!+BA2H(:)$S+#:(` +M1TQWM^?G`1/@4"D\6QF]UW<;^,MW'^')=AWZ?I#-OB!AV5U:D2&^TWP,%$*D +M@I%37BBB.4FV<*LL6=A(J]05@!"/JHL>CVM',/8Z%\P`Z:=I(N*??$YEMA+@ +MIU^;P[M?5?'YHW3!7_UDHJCPS;NR=2*_*E+Y".`D9I*OG6/+V( +MDE,;EI\'&(F$2N')]#3VBD7L%PJ#*XP,(]B!@VP\@O$EL`X9!I']K-QH8.'@ +MP$;D$5@/9G"38=V8\3>9M,]BSK-.=06$%&C?$Q$ZX\J1\I2EW0GQSU]LX.TO +M-]%A@0X,\WT0P:TI@F@R;.'!MKQ4]GQ&/6$D((!K'UY4G0&#"V3P\M[!F?)D +MK5!HURV17`"Z?4>>=F3-NN9\"MI +M/%O&5VMUW%H[O-GO.*0GD(X:1FVEHOGJ$F`D,G>PCZW*X*S.SQ.,_.*I(A.OWWN"K?V6'7[)1,YI_YP'"C,1CPZ2720;.#7WRTB@_O[H!",\";JQ=@ +M)(/(#?*B%,X&`DVI8Y[H(1Q)\46C"Q#Q`3R"#]MN6M +MN4VB`P67E*@=Z8D*6^THBKCG2R:+`7[ZUAP>[S3QSS=V1VZGE%=8F,QA9:8` +M9L8[MZMCR^AP7-(%I..`$0";26`0C$3L(MFTY\U@U+/@*#"R1\3,)D!A+XT, +M,\[L;+NRGIF'9>`D/;`J(*#9DS:F.FB`1$UUNGFWYU$(EQK[4^MBS@QRD1(!T7C$3V"D5,-1H#800`5S8V +M\.7R(_#$&2RC\NL7GQ&.M#!:$:2 +M00!BUM..]+UR&6R/:UUB:Z^-9CM$(7(Q$0G6@P#728Z@Q*R9CE'_"X8&8I9I8@=?)S?R'1:_$:(ZS&N;Y'"WKE] +M[(Y#YC@`L3>7Q[[\VAT\?UO";V\.;Z10!T^4<2GF%4IZP-%W`G;7ZJ3+1 +MQ<4"Z;AA!`8>3<]@&D?PBLUS!2@B=SPY`FQ1R +MW+8P`N"FOZ9NR,;J1U[4G1TP%=J!,K^91)R07`.$M9TZSB_XRP!.GC`SWKFY +MA5]\M(I6QVDR$E'H\R@.(0V:*(A$VR%3R6J;YJF(OT@6O6K=Q01XV\2KO6$4 +M#6(PD7Q,%I:(]->BQOJ4NL*\"0#K\$HVZXXBWYL$[>AYDW-S!?SDC3F\K.#F7*`4D'AH_O[I\Y$%Y<<\'1@!``=91971E2DWBU> +MV=C`C:6EWJ4R&/4L.#88F9\2R^`6N^K!;[]81*G5U)@A%:DGY8C9!BH0`:L3 +M$RBW.YAJU$$(L5F9`C/0(88R,_;00.G)3N-$`VFSVL3/?_,0]]9K"9J_F+(T +M"<0D%X&0KS7!#?@"(NLK\@,7`-.&W&H!G(.1VY,*?6&D`1'U&\GOSF_DH-IM +MJF.C%9DK%,P,WYF!F__G(3O_AH#>V.!QQ7`L[9 +MX\,C"B$+%D<,#T2P))'`!9<*R-];R/W"WOLT,))^"SQZ^XU\)GVW#86SY>\ER@%:'L;[7PN)4#M<7 +M)G!GO8ZUW=-KHHM+,I"."48`T,SET'VTMUQ=7\/GL82B)P%&Q"'.[6RCT.F@ +MK11:*D`["-"AZ)]'E]%:$9T&2)D@^E3Q^,'H5T5+*QU\"? +M__HA[FTD+V2TX`$<'>+F,#AMB`U%M,84`Y%GGK,I>`PN=$-N;R3)AV?[,"*, +M_#"')!!%H^JBICJ6:PW]ZL]G(,-;ER;PUJ5)_-4'FWB2,C==*:\P4PG0Z3`V +MJFV$S+BV7$:E^&R8Z.+2#:1C@M'RWAY6IW3FYML+\[BRL9&J"6*@W&SBH!"- +MTDMY^O0RI&;$1%`AH]2*?M&2`S:D%N$S+Q_=@&X,ZL+H=4>`D7_8FNX`Y#L= +ML"6/>(+D0>OX7H8.8[J*1=!1)]2,O.:;Y98(:&/`\3@!< +MGCL;Z"T+8_O!B$VYZ)-.]!O!FF(I8JHC>YU&.WJ.P[R_>VT*UU;*^/F[&]C< +M'YRUNY@GS)1S8`:V]MMHMG6FDI?/3F"WWL8'=Y\-$UUVFK(#%JL$6]VWL$&A`X#U7(1"!%).12!$@B?W-M] +MZD!JMD/\R;__*/K,^,+(M.`U/VK5S"JG@:3O$'#'5`9ZISCOG\Z(=$8#?>V4&9V8* +M^/F[&]@]Z)]=NY#3("("=FIM--IZHG-QOH@SLX5GSD07%P>D8X01H$UU9W>V +M\6A&;[AV:V'1\R7U/R^#<&%KR^Z5E.+TZ65$&/FR6RYCQP"WV&IAOE;#5+VN +MTR`!V"I7\'BF_T9SIP)&GEQ;7T>AU;*;])&0Q&A%LNNH4IHTJU.39BMT/1R& +MDOF9]<9_')(')8;$W(7$^)?/U_$';RQ!):DDQR`[M1;^CU]^A<=;XI`>=+,\ +M_XZ%CEM7Y*D1#D(>%"1*+?3*V^.`#;L.X6L?Y+0I2H*17I=$O6`4^;MEJX%% +M?&/6/V3LLU[DI5;$1!MS!#*G?BY@%"C@1Z_-8:HU6KE(%D6?;Q<)B(@A0!1ZBIM>U:CYNI%*% +MJ&M0^6W%9;3LT"L9U9^IBB)68G&LQ$P",C]O;R-W;KC;9$0!G%U?AV!*-#L# +M`W69L"R%"02&;H#C.:1#8?M:6"8K:A9N,RC`U9"25>:"D=)FIH3+\QD\M0?! +M#9FB@O_C._>0+[O-+@2M_J(MK[+U/7!9L7@"3,9E'$D&D`@QD[25.;U8U7!W +MM8"EK;)-1$[DG,O$AUH3G=M?9+6F=AR%$TW7S$S7E(P:",NL=F43D/.9:Z/J +M#I>I3N0)?O:Q(7`$^,:[:2AZ\T\M\@2Q(`^1)\B6==LGQ'/`]'``(U'QP&M% +M`/#HL3"^^.D+9'OE)[KHU(J,`&`K',;9M37<,OTH=T=&<6YUM:Y5Z\6CDQV2&DH +M(N'BJ2&#P`@6^_Z;=8T7!K.8^O_G01)<5P(AU-(K*T$T?;?>WP(9<7`J]>VFF;8E@2"6("' +MP!/DRCK2+NUI*"S@Y&@`^8J.]Q\4V%ZV`XR38P'$@P)>_O%MVGOYB2XZM2,C +M"YNA$)+%(C;#+%?=[OIN@XQZ'KESP]TF +M(V(8.+^VUM"%6OX?"M-O1&$[@4Q"J4J2F=';,>>A&2G!)"5J:E<@(-!!"(>' +MZ3)N+.9P_FBL^T5O$__Y1P^QFJF8XMDDU)H/WV$`EY;RZ-$XGC\SC%,38<>_ +MU@7"`0%/GQS"L9$0_OC5>TCE*C;!V"#N)*D6&3G^(BN\SSKOCJ9SEMF,C%P1 +M=02P4@,1RC;3DCJV<4Q[AX>,K+QT&WD5/[B9;0AJ"H@!$"^HM=$R8D\ +MP8G1`*(!'OMAG)&HZADK%3LU:PR['<.@V>XQP-"'557BDSJ5$K +M^P+J2(?"CGRK)2-T)".[HKT=Q.`:#W#"PDVR/`QD-!06\/-/)[&XJ>#[-VK) +M*"1Q&(^+B`1XY$H:UG-J#1F-QD0\,1V&JE.\OU`X%&0$`(]/1R#P!'?6V):) +MEH343S(*J`J(T3JZ9'YX&&.%O-WWWNBHRPW<>3'CN3QXP_"^9I^,O`X"2=-P +M9GV]:1=&*(R4""%,4*.>E#CV76`RSO1;F/VIX]^PQK*-0R8IV3+ICM';^&:4(BIK9A"M[O7&Y1>;B/*"LZYI8+<'+`$1@U!?(<=8B) +M:/9RSK+U_MQ31W`D&>PPFS<$9*Z6B"RM"*[R%/9$!!\]&\?WKF=P>:%H)CWE,9&0(/`$&WD%Z8+6X`LZDI#P^+$( +M\F4=EQ\4D:^T#PD_:'CN9!2%BH[KRTXNO^[+3[1#&S("*,(*2PD34%546I39 +MOCLR`LXP8)AI9E1>0"HUG9,**$`+#H-!%`;=&QC"5RT`C'&"2$J&L()]A4'`34LPU +MFI)A"4SS"=W6/#]X6&SUDMW +MX`V*V5;F09^,O`U"*,*NP?/$9R>C,`VR[F)I^8SDYI7_?7H +M=ZJ7VRL%5'6]"1&Y(^RHK4TZ)CM7#@A:OTY2][G,OD!G,J*'@XRFAV7\PM,C +M6-RJXKW[!42#/!3-P$I&0:&B-T36<028&I+PY'$FW]Z[7\!J=G\6F^P'3H\' +M,1P1\6:3ZK@N+F0;B'<*UI2+F5LK(E36L +M9544J\TUG=&HB*>.1Q`)\+CRL(CYC8JY#^]P0N`(+IZ*XOI2$=DF:91ZLR%X +M(",+:[&8O7'P^.9F3:M3J11D56W[+>Z4A+0>HFXXYKL!(:/M--Y-,I(T#1=6 +M5^W0WEZ0EV4[M1,C#C:2(DI.$(,EV"C,-$)VH#>H*W,`$XY.[AGJ='6T)0K\ +MI^\_0*:X,T^>TR,A/#Z3<`Y0Y]405%#_,H"(+"`2Z&H?>M>XNI!M)"*8I+=%A5SOA-0#&5FX +M-;WQ"&<_E +M,+NQX7'>6F0#02P,)1O680D^.W^:Z\D=EFD)'#,IF0+/H*:CWHRL<\B,V/+2 +M$J2%JHX_?>U^;=1>'_$//SJ-TY,1TXSHCJ"C#4$/]N@XF)W"U%;MIJFL5O+^1W;,"L)''[C,R?QV'2\J29D&+3A99W[\+F1OJ[E +MZY>6`3#":T]$L$V--JA;*W+*1YB,PY*T6MJGFXP`V$EA76G8#QH9\1P+VYY, +M2)@QJ[O>7"GC;][;A-)"(Q)Y@I-C`3QR-(Q<6<-[#PI(%0['YM9NP!'@DQ<2 +MV"IJN+GUA&=XSR; +M[RB`\VNK$/567Y##149GU]:P%0K;(?:$4EQ868&H&ZVZ=(7-4!AKT?:I?.PG +M<6LBNW(H,>,8+$$'N&*8&[2E^L]H5L0&*,77WE[>L0VS`L_AUSYY`B^<3;HT +MI!:F.O/U_.DD9B>C?5O#C<4<[JP4[&O52$06'")R]E#1.JW(^GLP[93]2:AC +MXG,'FECC6/N,#A@9R0+!<$3`:%0"I!H4L:3 +MQR.@E`4L+&\IS438H<;SLS'$0SQ>O99I^UWICI#Z1$86YL;'`0H. +M:=([M[96<[Q^!DH(;G6H)62W=8TSN[&!L7Q]9,?A(J-S:ZNX,SIJ:T=3F2V< +M]V36;(Z56,S6?CO!(B4[FX.=V@8FN1C.$SFXUMJ2J8'H+I\4!3/K_<&W;F,A +MU?I);#O@.()_\)'C^*V?F\583(8==MWD]:&S27SQP\?Z.O_7WUZ".U@!J-6( +M`$LKJOW^UY!*G59$[0:U_B+W%^(@DA%'6(F'\;B(6%!`L6H@E5?QW*DHSDZ& +M\#?OIG%OO=*T[UA,Q%,S$81ES@]8:(.38P%R*'38_,LG3G_Z=S]T +M\1S2K=3+/I.1=2`ORQ@JEQ%1JLB$G$V-FZ$0AHM%#)>*2$@A"`=#F.D +MV/I)N)F9+J2J&"J5L!FVPGB[7W.W&$@RHA3GU];`48KU6`Q#Q2).;*814+7& +MOAYQ?RB)7-!;!@("L%39U/S-]9;`JJD$5FJ!6#W,**^:04C-=]0JUZ!H!MZ] +MMX6S1Z)(A*4>/UE[C,1D?/C\*"8308@>F\(G'AL' +MS_4O5\$[=[?PO2OKCLD3@'4!K#!Z]IXVY,FSB,CV%0%PM"+G[U_C+Z(N?Y%K +MTZWY2+`OR8B`^7KB(0&QH`!-I\B6=!2J.H(2AY>>3`(4^.;E312:1,\EPP+. +M3`81EGG<6Z]@>4OQB:@%$B$>/_M8$E<>%G%SN=RRW6A,Q*7WYCID^]XA,@)8 +MNJ!<((!8I0*XGM@,CL-",HGIS4W,KJ_;554%78=6EW25$H(;X^,XO];H,VCG +M,Q(,`^=7EW$_.>R40N]BS=U@(,D(P`67%G1A964;\];BQOB$IWUBSGP4Q"Q) +M`<.J,$I-$Q&I"0VWW156>+*9)XT]T%MUE\S,!(!M\2M6=?R[OYG#/_O\:9R: +MB/3X"=N#YPB>/C6$IT_M?"F,S;R"+__H01-M"+#HP2(0=IS1!J5687'`5GLH +M9YK\8&NH=I%76Y6RS8X'\.+I +M..962_CIG7S-YR,`AJ,BCB8EZ`;P,%WMJA3Y88;`$7SZT2%LY%1<:A%55X_F +M)CN7JKX39&1A.9&`QG$X4Y>'KB1)2(=#$`P#Q[8V`;"]3$>R3?:9$((;$Q/0 +M..>C=!O`,+.9QNGU=9`VYL']3D:\830EH-[F=?Y$I=&ZC:/.J4C:$U_1OY61%[]_X,/*T!A(BXA +M'A*@:`96LPHVBPX962F`/C0;PP]O9O"FBXP(8::Y)V]^_V!C81$F[YMWJ`-NA7L=\;&P%&*:*52TW0]&D,F&$2DJF`B +MQ_P^R_%$\RP,%+@].H8JSWN.IA,,'>?65C&1:U*#:9^34:QY$01$@J^\G<+] +M%$MEPQ%@,B'AZ9D(1J(B[JZ5<76QA$S))Z)N\,A4""=&`_CNM8RG_5>UA+3+ +M9&3AYL0$CF:V&IJNQ.,H22*&2B6[YM&=D=%:(>OJ<'=D%)FVOHS6"TD42SB_ +MLH)PM=K5FKL;M;O&.T%&9]=6<333_LFD%^%R>V04#X>&^D)&-4>I9:)#4VW) +M"@\W#.>IWC(A-1`3=;0#:P)5I_B/W[J#*P_V'RF]>V\+WWE_#18)N:^?%37G +MO&]/1(`90&*3.NQQ[3'L4B'`?C+1R0+!4%C`1$*"+'+(E36L9A7DRGK#OB&. +M`!=/1O%S3PSAZL,BOG5Y"R7%`,^Q-#]/ST00#_*XM5S&]:62OY?(`T9C(IZ? +MC>&G=W)8]UAZW?$A[1$96;@Q,8E$J8BM4.T&P@?)81S?3&,BEX?""RC*,AXD +MDZST^>B8[7NRIEF))U"2Y";FO=8+<3\Q36]NFO,F49+DCNL>)#(BE&(JDV%^ +M.>]+:0N#$-P<&S>=XKV@.1FU6ACEJ+TY%J;I2#=]2U:);N*=NYOXXU?GV2\N$G)\1M8?WVKB +MIB0G(2J(F?K'O(:,D$RJL7QV;JW(CJ*C[JD'#@)'$)8YA&0>FDY1K.K(%+6V +MZXT'>7SB0@(<1_"U=]+8*FH0.(+)(0D3<0G9DH;K2R64#FGBT^U`%@D^_4@" +M\QL57%OR'N7:9?F)G24CJVD]&5EXD!S&D4P&TUM;)E%(R`8".+>^AIOCC::C +M;#"(@B3AC&W>ZXZ,W#AN$E,J',%&M/D>DNV0D;<;O#T9A:M53&4S$+JL[.55 +MN*3"$:Q'K4)PO:!+,H+SX&Z'%MM:CQ/T8%A"%:@E)@I00LR(,7:`]3;K,@'0 +M=(JOO+&(]^YE\&N?G,%X(M#3)]H-O'4[C3_Y[KPK*6LC";FHB5TW2ZML1D3N +M:$8`3MHZBXC8-7=?KT$D(D*822XL\^`(4*P:6,^USI[@QKG)()Z?C>'62@EO +MW-\0F<6UM%J^?@;C:OC10+ +M&"D6H'$S&.AXFAL`;!J8WMVH",GI82D=<'Y_H[3/7S=@- +M&37T,,UTU&0;8H:!6:NQ$[.")0<',4RARX(?V#Y9VTMB)A9@`1%WUPKX5W]^ +M#7_GA2E\ZO'!TY9^.7J%M(%%3.C`8Q$1*0* +M*CY8*+3,2^>C.SQS(H*QF(2OO9/J.0S>)J1!)B,+F^$P%)['S-8F%N,)W!D9 +MQ9FU-9Q;7\-B(H%\H,Y_1)A_ZD0ZA4!=GCRO.ZD%P\#Y-18ZG9,#6(M&H0I= +M),O<+AE1BEBEPOQ!II)P,I7J25IXZ;(1B6`CXFB&NT5&C2-0T[I$F!F/PB8= +MJX5A.*8\4.9CLO8R`H' +M:[`V"SDY`!M)"+"T(=C:$,QB>Q:KM"0BUMFUE6OPB$CD"4(RAY#$0]4,%!6C +M]9[)%CB:E/"Q3?2S)RWEC[EH`Z8C+J3'DP-W)2\WK96A,;JADYW5[- +MXW?_XAK^WO-'\42JIJ!8R,! +MK&84W%TO=V7B\]$9CTR%\,)L##^ZF<7\1F?_=3NT(*3!)",+JF6.6U]#O%S! +M3=,T%ZE6<6YM%3?'QFH$*@!D@R'DY$#',&BOD'0=HX4"1LU2ZQ1,Z"F\@&P@ +MB'Q`ALH+33^OH.N(5*N(*%6$JU5PU(Z7:FB[&V1T8WRB(>'JGI-1PW&3F"R- +MR3YA$1.QA;,5W`!J[6MJ14Z`HE+\V8\7\.9<"E]X]@@>/Y[8-6*BE.)'-U+X +ML]<7H&@LM+TU`5D/*&VT(5>P@CV'Q5Y.;?B!"UJH-37#V> +M/Q7!Q9,QK&85_.16%BM9U0]4V`%O9M,5.D5$7 +M)J^%9!*A:A4GTBD8A$#C>`B&CB/9+,;S>=P>&07EN)J^M\?&<#R=1DC9@6)N +M/9KI6K7NE8PZ-3<(P?UD$A6Q>9ZW02,C=X/F#T-F\`-QF?/L,'`K.JV1G(`Z +M[F,1SY].XKG3PS@^&JJ?N;?/2"G>G\_@:V\OX6&:F3A( +M72EQ-P&92ZXQQ[DU(3<)L>6[S'*N#!:LW=X3D2P2A"26PD?3*4J*CEP/)CDW +M>`Z8&6&E(@(BA^]>V\*ME7+?R\;[8#A_A)'1ZWTD(Z"&D/8?&5DHR;*9TVX5 +M;BL.;Q@XM[Z&HBCAP?!PS6`/DL,XO]H^I8YG[`J)%PT$FHV8S +MU@C8.C^3T[B.G,QC+0D*`(B!K8*";[^_BF^_OXJ)>``79X=P^D@4,Z-AA#U4 +M@%4U`S<60*VGNN(Q:\C$_D$5`=D@[T)F$S,]E?7FLO\=>FN8( +M@(#$(2ARD$4.JF:@I!C(EK1M$T9(XC"9D/#D\0@FAR3<7"KA^S>R?K+3'<2Y +M(R&\>":&U^=RN-E',@)L0MJ_9&2W(`0W)B9K@A<`=E^&%`7G5U;P<&@(!9E% +M4@FZCAL3DQC+YY`LE3R'3V]_S>U;]IN,LL$`EA)#'1ON%S)RPZKB9$4P6WXA +MNX!R4/Q97(D]2I*;;V8\YGGR+V#J/N2*AFR7L7K$`( +M$!0Y!"7F$ZJJ!LJJ@:T.FU:[1=+,R#`1EW!L6$:IJN,OWMSPG!G`AS>P).1"]E@"-E`$*>,:!D5!4$+"42C?ZA`T1&M.E[,]^=)'&TIU=)AVWY-1L^.6IN1H"Z;D=@=# +MV$1@_K!"I-T1:F:..#OJC@+NB(.:=5C]2+N%.VF-ZHFG!J09`6&@2(CG@*#$ +M(R1QX#F"LJ(C5]9:EOKV"H$C&(D*&(U)D`6"C;R*BF+@R9D(TGD57WDKA7R' +MHF\^MH\S$T%\Y&P<;][.X7H/*8&Z15M"VI=DY#I3$27U0.3*O-ON"FWC@4L6H\SM@&1?W +ME(1$GIB:$`<"H*P8VPK1K@K,`R*%\_$,!06\<;M +M7,M*KC[ZBS,307ST'".C7O+3>4%+0MKO9.0^L!Z-83T:P]&M+42KC5]B2==P +M?G4%PI4JPDH5D6H5`GPWCR>`2W5\OX +M[M6,GUUAE_#LB0B>.![!3^_L/!D!+0CI()&1&XM#0R"48B:=1D!K='Z>V5C' +M>B1:0SRM)BK*,HJRC/6HRT1D&.`I!4G5[89N&,I]B#*-IRC)*,@2 +M2J($@Q#H'-=4^]E],JHS4^T3,NHTAEOTUUMHF^HY+;>T-&O=1-NJ\26Y?%LU +M7:@=8&$=VFT1+(L$09%'4&+AV67%P$:ENR2FW8*9Y$2,QD3;).?.M#T1%_&1 +MLW$8%/CF^YM^T,(N0>()/O%(`I,)":]=S^R:-MI=MN\#0$;V84(P/S("`)A) +MIQ"LRW$W5LACK)#'K=$QZ,VTI39KIAP'RWVK"`*VPN$6+9L<\2AM?#+J'YJ- +MV_`00;?W_6S5S-)Q2>.I72<@`D`6.80D)SR[K!K(9;)BN(EMR+`VR0/#K'"]C+O7,M8=GBT+'*J:P7Q"):WO!!`+\DB&!8R8)KGUG(([:XTYY6;' +M`WA^-H94C@4M%*I^T,)NX<0HVUR\EE7PVO7,KF=`;Y_M^P"3D;OI6BR&M5@, +MDJ;A9#H%SKP30ZJ""VNK,`C!9C#$PL,]3^.345?=!HB,NL6@KJL3>([EC:L/ +MS]XL]&>/D!NQ((_AB(CAB`#=`-(%%=>62B@W*7X7"_+XR)DX$F$!/YG+;3M1 +MIP]ON'@RBL>GP_A@H8BW[^7W9`T"<+C)R`U%$'#3C*R;RFPA5JF"@((S6)3= +MB!FI5Q($+,<34`2A(1EIIUE\,O+68+\*_4$"`2")!$&10T#D`!!45!WYLK8C +M3\#-2.C&<@G%:G/GD\03/'$\@D>.AC"W4L8K5[?Z%K'GHS-D@>`3%Q(8CTOX +MWK7,GCX(-(^R.X1D5(^EQ!"6`,"@&"OD,5PLVB&V04W#J73*;JL3@H(<0%Z6 +M49(D,U)O<,BHMUO;)Z/]#)$GD$T"DG@"Q?0'Y2OJCI1=<).09E"D"YW+@',$ +M.#\5PM/'(UC/J_CJI;2?C7N7D0P+^,QC0Z`4^/J[K)S[7J*1D+S[97OJ,,AD +M5-.8$#ML'(:!L*K@2#8+P7!N-)Y2Q"MEQ"ME5T<&G7`P"(%!`(-PJ`H"-,)! +MXS@8'`>-(^`H6.D)\\69+YTC2$6B/AFU0#0@(%_9VQN($!8IMM=/](0P,YSU +MT@V*JFKLF!8$`/$@C^&HB&38)*%\9Q*R<&(T@(LGHU!U`]^]EL%R9@<2'?MH +MBY-CS%^TDE'PVK7!"*6O):3]1D8[I64T:4P!@.-0D`.8&W,JBT8J%4SD<^`- +M`[Q!&W;H\]0`9]^?.@)*Z[!52EBFA0=#2;L:K4]&#B[.)G'A:`Q'1X(X.AQ" +M4.)1574L;Y9Q8S&/;UQ:1DFI=8!_[,(H/O[(*+YQ:1GOS6=:C`R$91[_PR^< +MM7__7[Y^"\46SO3CHR&\>'8$)\;#.#X:@LAS6,M6L)@N8WZM@%AUX6Z'4T&\.N?.@%"S`VR5MHA +M`,U"+MZYNXEOOKO:=EWM0&!J0CV2$`",Q40\/QM#1.9P:;Z`VWVHH>/#&PAA +M_J+'CH5Q^4$!E^9[2)>V0W`(R2>CEHW;]2T$`K@3"-2TY`P#846!K&F0-`T< +M961%J)FIF0`:QT/E>91%$45)8MFW>UWS`2>C>$C$?_7)&3QU8JCAG"SR.#$> +MP8GQ"#YZ801?>NT^+MW=LL\G(Q).343P3W_V%'[WSZ]A+=/TT.!3$Y%,3%V21>/#>"/_SV72QOMA:VSYP:PK&1 +M$%X\.]R2D$Z,A_'H=!P`<&PXB(54"4')-,,)')(1$3-C81!"NBHF:%6B]0*. +M`/&0@*&PT#,)`8S(+IZ,8FI(Q@XYOV+K[F,D(N"CYQ*(!7F\>G4+#U+5 +MO5Y2#3P]AOMDU%U'@^.0#P20ZWD1/AE9>.18#/_U9T\A$JQ-$*L;%/FRBD38 +MJ><4#8H-6H2%H,3COWUI%O_J+ZZ;55F]XU<^?`R?>WJRYEA5U:%J1LWZC@Z' +M\+N_\@C^W=_,X?IBKGX8B#S!5#((`'CZY!"^]-K]II_]F9-#H-0`I12/3<=0 +M4;2:B#A1$,`U>9#9+F218"@D8B@L(!KD4:KJR)2TEM%QG<9Z^G@4YXX$<6NE +MC+_XZ89?+&\/P'/`,S-,*UK.5/'*U2T4!C`'8-<%77:6C#R<'7`R:GK$)Z.. +M#9J="H@ZM83)>@ZA2)L(C'C\?Q2\\?Q59!:6N6FQH. +MX=<_=0+_^]]:"^JE```@`$E$053>[;32!LQ.1&K(Z/YZ$7_ZVGTL;+`LTT-A +M$1^[,(I??'X*'"&0!`[_X*/3^)?_^6K#9YL>#8,SJ]#&0B).'XG:6I+`$=,/ +M1/#,R3@,@^7/&XT'L9IM[V?YM__?36P56[C2,)Z8C6,DH^.NW4\B6!T\`'@9,)B1\]&P)C`#@[[YPU-:`**7XT]?NXP?7-FK:9(HJ?G@] +MA3?G-I$(-Y9AK\<+9X9Q;[6`[UQ>Z]C6C2^^>,Q^?V^U@'_[U9LU3_I;115? +M>WL9:]DJ?O.SIP``QT9">.'L,-ZX59MQ_L28D\HKG9X>PD2U#%C@8E`4C +M!&01$T,AVQ1W8CR,3EC/5I#*=Q<<('#$)J!X2("BL02I]]8KR)?U;44XGAX/ +MXMF3$904`]^YLM612'WL#"2>X+E349P]$L+\>@4_N9T;>.VTM_(3'CKX9-3S +M,CPU/&AD-)4,XM./C]N_OW$KW4!&;BB:@?5L=_;P7_G(-.;7B[B]TITS]Y%C +M,9R=BMJ_?_6MI98W]IMS:7SAV4D<'6;ESE]Z>K*!D$Z.AV$8AIGMF^*IDPE\ +MY?WLW[V;CW$-/#,CYREOD?7[FRA87T8/F*6L%[^0D/'7PRZGD9 +MGAH>-#("@$>F8[992],-?.7-1:]+:PF>(_BMS\WB?_JS:\B6.B?K/'_4R="1 +MRE5QY4&V36O@M:OK^-6/SP``)H<"$#A`$E@P@BQRF!EC_B..XT`(03(J8'PH +MB/DU)WW5TR=K`S@XCN#X:!AW5KN/B.(Y(!9D6M!0B-WJ6R4-2UM*7\J'6Q@* +M"WCN5!3C,0GO/2C@VJ)?+&^O$!`YO'@ZAA-C`=Q:+N&MN_F!".?N%M[*3[2# +M3T8]+L(GHV:82H;L]PNI$M)=FJ+:82U3P7!4@L!S2(0E_-;G9O%[?WVCH_"< +M2#AA_@NI4L>U;V0JM@9$0'%J(H2U3!4EA04D3`R%P-5%Q3U[*FD34CPDUD3\ +M63@QWIZ0/O'8.'1=ARP0R"*!R`&*#KQ^,XT;R]ZBXKK!<$3`4S,1'$W*N+%4 +MPO?W(/>9#P>G)X)XX504%8WBY?&L)?_N0A`."I +M$PG[N+M-,S^281CVZ]./#H$0`H[C3.V+:6#?^2#55S(:C8EXZG@$DPD)-Y9+ +M^+,W_,BYO41$YO&1LS$<&9)QY6$1[][/[]N0^N[*3[2#3T8]+L(GHW:8B,OV +M^XT6OJ'G9I/X)Y^8:3C^\CO+^,N?-#?QO?K!&LX"YT\,`@)]]<@)W5PNX +MN=1ZZEQ^HAU\,NIA`1Z['$(R`H!L6;/#O2/!KGX\CHV$,#G$ +MM+!?_]0)_/MOW&[9/E-4$!0Y4$HQ%F/[Z,`8+/@F$YF7%K. +M_%H1MY<+^/F+1P``S\XFD4;O)A(2GCDY*MTV27L,Q!Y`1(`H=LH8K)A`R.(Y`DH6/5TF2TEI#6729' +MMX9T?[V(!QLEAY!.#6$M4P8!A:JJN+V>]=&>SZ[#O;C`U).&IF0B&0@*N+!;QZM6M?>4@/VC@.>#\D1">/,[\B^_, +MYW%CN;1OS7/-T+K\1#OX9-3#`CQV.<1D!`"KF3(`9KHZ/A)J&O)\_6$.UQ^R +M3`B_\\4+71,2P/Q)7_K^??S&IQD1Q8("=%VW?38<(OI?'5A<<\3^NX$O-M"?#+J80$>NQQR,@*`^^M.WK5( +M4,1GGYK`-RZM]#A:+22!^8#FEG+XZ:T-7#P];`<#```QR7RP4#AP3]_[$2?'`GCF +M1!01F<.-Y1+>>U`XT'X[;X3DDU$/"_#8Q2/L>BX:Z +MNU[%9Y^:`N_*2_?FK;3MFWK@2HHZ,]8Y8X-7G!@-X*F9"&2!X(.%(FZN^$2T +MUSB:E''Q9`3)L(BYU3+>O9]O6>#P(*'[S(S[C8QH8V.?C'H9I;<&VWV&HP#^ +MTP\?V+\')1Z_\\L7\)DGQB&+M5_;)V;B&#.C\BBEX`G++CT:%1&6"0RS=I5N +M`,L9!:F\BEQ9AZ)1J#K%'WSS#HK5UM%)5=7`M]]WRC9`\Y.!O%?/#>"YT]%<7VI +MA#]_

P=??'$*1X8"ML]I,LDR=Q/B:$OW5@OXP[^] +M@U3.B7@+2;RMQ0$LPLZ-]^:$U`ZZKF,L0O`K +M+XSBX685KUS-[,N=_`<)(D]P9C*(1Z;"B`9Y+*2J^,9[::QFMQ>FOY_1GI!\ +M,O(ZB/=Y?3)J"9$GD`2":PL9_/[+9?S,(V.8&`I@/!&$)#"M1]4IUC,5/-@H +MX=OOK>!AJC:U?D75[:P-K/OGX.!Z=CN/82,@LY,?&7DB5<.UA%M]Z=[6A+M.19!"Y,IN_JNI8 +MKQ,/,1!"4`C=72KB^5/+_+@#(S$O_AO[WO_D+N+525R/# +M)R.O@WB?UR(VQO4D71L;6-39\$ +M0%#B$)9Y1`(\H@$>L1"K!_1@HX1<6:^)MJL'SQ%,#@50JNHUFU][15CF$0^) +M6-[:7I9L62`X=R2$"U,AZ`9P;;&(6RN]U37RT3\<3;.FBX,!7"__8GW]";:T@^&7D=Q/N\AYR,))X1CV02$,`R$U0U`Z62UG:/ +MA4&!%8]"6Q((0A*/D,PA;/X,B!P4C:)89<23RJLH5/6&S`NMH!L4B^G^%3LK +M5G44J[T_)2="/!X]&L;L1!#K616OS^7V3=F!@PJ1)S@S$<2%J1!B(0$/TU5\ +MZ_(FEK=\!_$^[R$C(]XLOV"1C\BQ3:Y5S4!),9#I8RD$GH-- +M/.Z?E%*4%`.EJHYL6<-*QD!)T0^$,_]HDCG$)Q,2[JQ5\+5WTM@J'CZ'^"`A +M%N1Q82J$,Q-LD_3<:@G7KVPAYU?-;8M:0O+)R.L@WN<]X&1$`(@F\5CF-TJI +M;78K5=MK/]W",K>%)`XAF;=_BCQ!66%DPW+-J2A5C0.WJUW@"$Y/!/'HT1!$ +M@N^$G.]U+\!PP/1S`Z8D@C@W+R)4T7)K/8\XWEW8-AY!\,O(ZB/=Y +M!XB,NNK2!1E9@0WZ12EJHZ28F`C +MKZ*4KJ*B&'T/KA@DC$1%G)L,XN18$-FRAGCMHWV&QE9Y".8Y"-P9N"!9C`" +MJM!M/0GR'-L`&ZXSMP%`2=%1JAK,W)8U4%;T0[.!4Q8(9L>#.'LDA&B`Q]VU +M,KYU>1,;^<,;'KS7&(F*F!T/X.18$"&)PUI.Q:5Y5K;=KPW5.SR6G_#)R/.\ +M^Y2,ZC4?P?+[Z-LG'P(@8)K;PBYSFR28YK:J@:*B8ZNHH:3HA[;4P61"PKDC +M(1#S((U/2<'VIB#MK%3]DNT_P +M4'[")R//\^X3,JHA']XA'Z6.?+Q.*0FLBJKU"DK.3T5SS&TIT]Q6/N#FMFX0 +MDCB[6,O[Z40K;D"[R]0%#B<&HL@%/C08Q&112K.NZN57!W +MO7PH,RGL-+HL/^&3D>=Y!Y2,6FD^BF9`40T4RLTUGU936J6[ZXE'%C@8E-4> +MJJ@&*HJ!S8*&BLH"#@Z+N:T;$`),#\LX.\GVJ"QM5?'671:R[2M#NP])(#@^ +M$L#L>`!'$C(4W<#\>@4_O9/WLUOL,+K(9>>3D>=Y!X2,FOI\]!8^GQ;C$@!2 +M#>$0!"2>_10Y:#IU2$9R1#.3`2A&Q2W5LIX?>[P +M)-(<)"3#`HX-RY@>EC$6DV!0B@>I*EZYRH(3_*_R[J`#(?EDY'G>/2*C9M%N +MFKG71]$,Y"M&2ZW$\NG4:SH!B8VE6J2C,-+)YQ2;@'Q-QQMX#C@Y&L29R2#& +M8B+NIZIX[4;&WRBYRQ`X@B-#$J:'91P;EA&6>12K.AZFJ[B\4,3REN(_4.T! +MVA"23T:>Y]T%,N(YEO6ZIJR`23Y6I@.+?-SSW6J8E\M%_Q(,\CID$-)E@^0#7 +ML@JN+Y6PD*[ZFXD'`"T(R2)QTO'HAJ4A668Z +MBE))0]5,3EI5ZR+8VBS.OT5[QW!$P*FQ($Z-!R!P!/,;%7SO6@8K&=\DMQL8 +MC@@8CTLXFI0QF9`@\`0;.16W5\MXF*X@Y4?$`*ZR93X9>9[7`QD)'(%8 +M1SR2P($0"@("0MA3'<\1B`)G)R"US'%6Z>VJ:J!8U6P"0`CEA1;Q2*QLH%!`+"3@:)*5A19Y`@K8&9*S)492 +MV9*&;%E'6>E\YQT4,N((,ZV)9JT>@2.0!6*334#D($L<))X#S['"<575,$.@ +M=>0J.A35,#>;LG.J3DVRZ3VTVU,7GXRVA8#(X<1H`*?&`QB+25C:JN+*PR(> +MI*H'+GGK("`6Y$WR$3$>EY`("3`HD,ZK6,TJN+Q0P%I6]5/U'"`(`*!H+.8> +MJ$T&&)0XQ$,"XD$>\9"`1$C`]+",D,SRBVDZM;6H8E5'H:*CX/K9]9/B'I`1 +M@14TX+P$@6LX9@45\!Q`*1N24@J`N,QGK)9.R8Q0YT[O,VH_0F^-?'':'(D0C^,C`1P? +M"6`D*F(]I^#^1@4_O)E%J0NK@(_VB`5Y#$=$#$<$)",B1J(B0A(KTEBHZ-C( +MJ_A@H8#5K(IT0=UVMG@?^P=-":E3`(.F4Z0+6M-<3H0`D0"/B,PC;/YT$U9( +MYL$1IJ%4S7QF5ABR%9)L.>L)ZDF%_TUGH="*1J$;AGU> +M-UAF`DUGQ"/PCD9DD9054JT9%*I6I^WLPCXC[R/TULB_QQT0L!#MZ9$`9D8" +M",L<%C<5W%QF^U-\DU!OX`C+@)",B!B.,@(:CHAV%.E6446ZH.'R0@'IO(;- +M@NJ'81]RV(3$$>9DAQGI10BQB8,C+`*,F&UJSIOO>0)P=9H(9VHAA8J&LD*0 +M)HS`ZJ/,@B+;.R.+;-^,I7M45`.%BH%\14>AHB%?T;%9U)`MJ2A4:E/3M!+L +MEN_'VM,3$!D)&91I.JK.*HFJ>H>L`SM%1CW>?SX9;0\\QRJM'A\)8'I8!@6P +MD*KBS3LY+&U5?;.01X1E9MY/A@63?$0D0@(X`E0UEL"^/61MS:B6Z8 +MVD8;,QU'@+"I545D#N$`CVB`1SPH8&I(1DCF[##UBLK,@?D*JX]3KM9J6800 +M4&L_CYE&IUBE-0[HW1?L/AGM%0(B\P<='PG@:%)"H:+C0:J*[US9PGK.WZS: +M";)($`\*-7YEZSW/L;NR4-&1*JB8WZ@@G5>Q6=!0J/I1;SZZ@P`PP?[^0KGV +MC`?)Y4G(=?`9&13(5_2FH9L\1R'Q!-&@@'B(1S0@(!KD$99X),."7=X`8*19 +M5@SD*QJ*50.EJHZR:1ID+U;ZH*PV9BGHYL/Y9+0_$`_QF!X.8&9$QFA,PD9> +MQ4*J@K?NY?R2#DT@<`3Q$(^8>8]9?N)XB( +M/K:#YD$->T1&`.R4.7;P@?F>YQRMJZ(:*&SJ4(VJ[2^R0,R<;=&`@$B`0\3\ +M&0L)F+!J\I@.5`N5&J)BY1&:_6X5BO/):'`A"P1321E'DS*FAB0$1`Y+6PKF +M5LMXY6KFT/N#!(X@'&"%$=U^WFB`1SS$(VQ&T%H/AKF2AO6<@MNK)NF4-3\; +MN8\=0R,A[0(962'7O)MXS)\&94$'5O!!536@&8W^G58^(TJ!8M5`L:H`V=;+ +ML>KV."]6N30H<1B-20B:YR7!R6.A&["U*T943,,JFX7FK',5M;ZFD$]&.P5" +M@/&8R`@H*6,D*B)3U+"T5<6/;N6PDCD\_B">8^9N]N(0"?#V[^P]9VLY`.Q\ +MB(6*CEQ9PT*::3NY$O/7^CX>'[N-6D+J,QDQD@$$0LR(-G8,`%0#-O&4%<-^ +MW\U,_8A,*ZN,3%!L/R7/`4&);R"OH,ARR@U'!/L\[U*\#(,Y,U!5F=^MTB8S@T]&M8@&>!PUM:#)A`2=4BQOL:S-2YO5`Q6:30#( +M==5V`Z*3_<,BGW"`?28#(AV204 +M"?!8S2A8VJKBW?OY?5-*VLG@[D27!LSOBUUIMXYT))&#^QOBKL)K:>I+6YJ] +MQ\_2>'Q?CH_]"$9(;;Z[!'!,:QP+[19X9V^0M>_'VF1:5IFVTRF:KC/VGHR\ +M3F?EI,M"MWMU,M,1,"*S2$H6&4D%1(>P9)%#2.*1"!.[C2QPX.JXC%)`T0WH +M.H5F[LNR'PIEY`K:UC: +M5/#&[1Q6,CM3/,TR)5ND83]HN1ZV1-=YM[F9'3>M`#SG.N:<)XW/'M"-VI(@ +M%=5`*J_6^#7==:I\K<;'088`L"@UQSO!($06PMC),5R[=E_0_M!PM%4WD9@T,"H?( +M&LB,MOYNT-J@$#O4'T`XP",69,[U:$"`3BER9N[$A70%BD8A"@0SHP',C`:: +M7$6TC9;D7==`K"<8U_>^'2QR5JV?=61O6P%TK28+B-:DO:(QLO%SX/GPX4`` +M8$?<6$_$5;,T==.-I]W`)Z-="6#0*(56I3513_T0;QQ!#8G5D)N+Y!B)H2FY +M\Q3T:#$,!@4+#:2WUZ>I=X +MPK(V)R1,)EC9@$)%Q_U4%2N9O%\RP(UX).1MQGW.QGU`U;=FLD$ +MJULS'!&1+6M8R2BXNEC$:D8Y4)%P/GSXZ`_:$I)/1MYF/(QD)'`$(U$1(U$! +MHU&6N3D6%+!95+&24?#^@P)6L@JJZB!1I@\?/@81;?C':6C-HTV$F1 +MSW-`TB(?\S44$E`VPY)3>17WUBM(Y=6N*@?[\.'#1R<(7WS6P*_^S`GP/+^] +MD3K%"N_J,'T:I4^?J1_HQU+:1J@1%NY-7.5'6(7"\JY(EEIIVO2Y`&NR5S.I6V^D-;K[/KTOEOU=TU;]>^OE_MYVF_@+;7O,6%KF&S>?J?,UK2;2[:\[Z>+_FW3\DLK%K +MU]>IO;.^=N#:G_;APT=WV&DR\KZ6?K7O23/JT?:^G:?T;MMWW\>+=M19,^JV +M??MYNL%@7O-NX!.2#Q]-,%B"LR(8=Y88!^N:#Q(9>7D(V,EK[IZGJY:> +M^_F$Y,-''7S!V&F>]AATP=A+^UZN12_7O-?VO:W/^UKZ_P#EC`WXA.3#1PU\ +MP=C]6KJ?JU.?P1.,W?=I?K(_Z]LY\VBO_M%>VGNYYCXA^?!AXO`(QLZ+/NR" +ML;L^7LEH<'QUWK![)FF?D'SXP&$3C!UF]P6CI['[T=X/'&'P"/W<;@W*3],P'Y@M&:QUO[SOUV +M\IIWCX,8.`+X&I*/0X[!$HQ-1O`%HVN>KEIZ'7D;=%XSNN;R/[0M&9^S=$HR]7/->V_N!(ZXC=8<$`"A_ +M\Q*J8FTEBL"%:4@GQKM=F0\?!Q0[>9/VAXQZ;>\+QNVU]0-'K'F\M6_7CVE( +M38+L*M<70'6_SHV/@X7!N4G[)XQ\P6C-XZU]YWX[>G/EZON5>-M'OL9_]H6Q\2-0P4?G"U +MTXP^?`P\?,'8JH\7P;C39#0X@K'59WC[S?X``!2+241!5-V;*,;NQ]_?_M$N +M@AJ,0AGER_.=FOGP,;#P!:.WL;N;JU.?_2P8O5SSSO`#1[KIPTYV%66G+J90 +M?O^>]Q7X\+''\`5CJWZ^8.PTMM>U=)YK9Z_Y8)FDO:\%\!#VK2ZE47SCIH=) +M?/C8;]C)F[0_9-1K>U\P;J^M'SABS>.M?>=^M2<\[4/2-_,H?/>RERX^?.P9 +M!N0U[QZ'/7#$\\98HZ(@]_(E4,T/"?\S40)'_VW=0_/%U?Z^2CX'# +M_A6,.TU&OF#LMGWK/CNC8?J!(PQ"TZ-=0L\6D?_V.Q"&8Y!F)R&,Q+8SG`\? +MV\;^%HPM1CF`@K'_FJ4SMK<^7LBH,_S`D6[ZM#ZY+4*RH*5S;#"?D'SL(7S! +MV*K?X`G&7MK[$77N?H-DDO:^EE;@"/I1H(\@],+9;8[AP\=N8B<%8W_(J-?V +MOF#<7MO="APYJ-=\.R;IOF3[CGW^V7X,X\-'SQB;^T[]]O) +M:^X5.WG-K3X[LY:=N.;;)B1Q,KG=(7SXV!8&2S`V&>'0"\;>KWFO[?W`$3;^ +M?O./"LV'[A[JRB;4ESRZ4RN4WIY#[N6W4;FQN.VQ?/CH!%\P=K^6 +M[N?JU.?@"48_<&1[5H!>R:A9/]MD%_W,DY#/'O6^FB90[JT@]\U+,$I*7\;S +MX:,>OF!LU>^P",:=>TKOIKWOJ]M>VU9SU?B0Y-E)1#_W+)I6[/,*2E%X[3+* +M[\]O?RP?/ES8^0V!OF!LWF^0!*,7[*1Y]#!=\YTW23<$-1".(/;Y9R%.#7>Q +MP,Y0EU(H?//YMC)F[1_Y.(+1FL>;^T[]]O):^X5@WG- +M>VV_$]>\991=\,F3B'SJR98#>X%149#_UB54KC623^#"-`K?O]*7>7PIZN6'OMYM0*T&*6+:\ZUL\YQ`1&Q +MSU^$-#/N??8F4.ZO(??RVZC>7JXY+DP,(>]G$??1`;Y@[#1/>PRZ8.REO1\X +MPM8RZ/[1;M'5/J3`(].(?O89$('?UF06JG-+R+W\-DIOWH)14A`X=Q2THJ#P +MO0_Z,KZ/@P=?,':_EN[GZM3GX`G&00\<.:C^T6Z_ZUUOC"4"A^AGGT;H^?ZE +M"-+2.11>NXS<-R^!CX5@E*LH_.!JW\;W<3!P>`1CYT7[@K&;/E[)J/_FT=V, +M8CQ(@2.>,S4((S'$/G\1PFC":]?6H!1ZK@0`,`IEOS*M#QN'2S!VF-T7C)[& +M[D=[/W#$=6073-(]IPX*/7<:T9][!EPXT.L0+:%OYE%^[U[?Q_5QT+&3-^GN +M$6/3L[Y@[*)?_P1C8Y^=_?O[UYQA6[GL",\A\C./(?(SCP/;SAA>"W4Y[>]A +M.N08G)NT?R8@7S!:\WAKW[G?3E[S[M$L<$11%.1RN39]O$^VN+C4[8IJ?LO\ +M_?\5Z\=^$\;29E?M@=ZN1:\FZ;YD^^;",F(O/8O()Y]`7S;5FE"74DU#Q7T< +M?`R68&PRPCX4C)W[>)_,#QQIG*M<+B.52F%N;@[__)__-L;')[&^OMZB3^>Q +M2Z423 +M4G],TMM!7PKT6>""$F*??Q;:6@;E=^[T]`6OAW)_#535$7SR1!]6Z&,_P!>, +MW:^E^[DZ]?&^%C]PI%D?BG???0]?^,+/UYR?G9UMTJ>[L;_\Y2_C7_R+_['F +MV,3$1#>KLM^E7_P=Z/?704U]@4H\4H__-D;G?A\D&4$_R6@[#UY]*M!7"V$\ +M@>A+SR+\XOF^C*OMFG_H0R_4G/__V[OV +MZ";*+/Z;2=*D34J;-GU!6\J[U"+04H];Y8@'?+!%7!Y+U045Q<0-%C +MJWM$5Q'WL.!Q#ZOR$`2E*Z*M4A"*"RST0>F#2ENTM*70AZ4\FJ:O)/M'R21? +M9J:9:3-I6N=W3@_YON_>^]VY"??.]WUW[B@4_7M<9MFR91@Y]F!SC-+`L]NC[MTRQ7\HC=DDY,3!#!S[8Y[>^+H&-_@\(0``H4`G:_!)\[8UGTSGR]R1;&(VY+ +M6M*`9`.E4L!_=B+\[TV`(E#;+UDWOLM'YP7N_5@9OR5(Z1BEWDOWC&,4QB?. +M,9)S":,7SB->%\Z1?CO&_G^?HT;9CQB<;=P7FX>%":V6PV]S6J]#T*'7,>R# +MQZ&>=2N+GH^/2[8P'G'!"'#S&9(K4"H%M'?$`0`ZJQKZ7%BU_6PU.BKKH)MQ +M*RB5>ZI'R!A8>(]C=%]P\0;'V/ML387NR+EAN.YO&W[KC_GH\[;?EJM +M\TZ3\RK,M6R3R01?7U^!/.+^C[:V&J'3\>^&\=UX#5A`LH%2T!B6,@T`T'FA +M$1T5=;!V=0OFMYHMN)Z9!]I7#2T +M>79V-C9L^`"%A6?0U=4%H"?P3)DR&:^^NA;3IMEOM",B(CAU*2@XC;2T=.3G +MYZ.KJPNAH:&8/?M^O/_^>H(N-S<7)I,)9\^6H;BX&`4%!4A/3T-*RN^9:ZJK +MJ\/NW7MPZM0IE)65H;.S"RTM+0"`X.!@1$9&8N[<.5B^_'G0-W,";)>5F9F% +MAH8&5%96(C^_`-75U:BH^`G-S2,9 +M;H?L&,7)YI]+N'PY<82/3[C-K58KMFS9@C5K7F:-F\UFE)7]Y%+.BA4KL6W; +M=E;_M6O7L7_\>EBY]G%,_BJ)P[-AQ//C@'XC^QL9&;-NV'5]_ +MO1]%187,2FKTZ-&(C8TC:&-B1C+7].*+?\'GG^_FU;>YN1G-SEO,.V0$`-,)A,F3HQGR:JMO8B//OH7?OVU&9LW;R3& +M/)+4(!:4@H9Z;`2&I21A6$H2_)+&B^*WM'7`5%")ZYEYN)Z9!^-QUS\0&9Z% +M[!CY^*0+1N+AV>W1P9(XDI&1P0I&@8&!N/_^^Y"4-,WE=MK*E7]E@A%%47CX +MX8>P<^<.K%RY`AJ-O13;ZM5KF)63,_S\_%C!R!%7KU[%4T\]S;0-!@/BX\G@ +MX*AG4E(2,>;CXP.M5@N=3@<_/S]BK+R\',N6/4WTS9@Q@VC[^OKBL<>6,I^U +M6BVSJK)A[]Z]L%@L1)]7!B1G*$,#F."D38Z#0N\OBM]\M94)3MS9>>VTM2DOM[X6S6"QX +MXHDG.>6L6K4&`'#WW3-P[MQ9;-JTD463G7T0]?4-3#LL+)1%8[-%:NHB:#0: +MA(:&(#O[>U14_(3SY\N9/V?Y)27D3D',6^?1DH+R]#1<4Y +MY.0<9LV_>_<>HCTH`I(C%'HMM,FQ&):2!-VL*=#<,E)T@5>+J0,=E74PGO@) +M-PX4W`Q4^3`>+T-[62W,U]HDTEX&X$V.T7W!1J:7HFGXC!L.]5CN0T49XN!=CI%#PB!QC.)XQ$\F)XXX\_709F1D +M$&///ON,(!DV%!>7,)]'C!@!E4K%Z&+3;]*D6W'FC'VE1#I_.]Y]]QT'_8"Q +M8\<@-345>_;85QWY^?D0?,>1&9F)M,^?_YG8GQ0!R0N4`H:B@`_^$X>!=_)O=>_L[1WP=K>R?QK +M[>B"Y>:_5K.EYYNV6-%]Z4I/<+-8`(4"FK@H*(+\0='N+;DTU#%X':/4P4B\ +M8Q0*.7%$G&Q7/&(B0DA*7?,\\\302DA@:Q103X=5>KU:(DW7)+'&L7P/E,S'G5-N0"DAC0 +M&A6@44%^M%9Z#&['R"-E`!VC,!XI;>X\EVO9XGC$!"/7D.*L+CHZ6I0.QX\? +M)]H]]>C8NP#.M46Y:HTF)"1PVD*O)S.+32:3"`WM`@L+"W'@0#9HFD9143$F +M3YZ,FAK[V5B/3OQV-!B"^_1=_:8#D@S/0':,?'SN<8SN0=\#Z5#.J.N-?M(D +M=DIS;[]UQS1I`-BPX0-LW/A/%AU?9ITCG(NMVN?@O[V.CX_'P8.'>$9[]'[D +MD<4X<>($C$9R59:=?9!HLS,)2;"#J#"[RP%)AI=!2L?HGF#45WHYHZY_M)Y* +M'!%J?_XYI*6]3E"FI:7W(2")^ZW+`4F& +M9/`NQ\@A88@X1G(N\9/)B2/.?,)HV]O;;_((H_?U)1]/T>ET2$]/(-H&@X&QA6/`<41-30U.G5[><^]-B1EF.1#'?#DW?ILF.T\4@9C)SG#2BD._WM!#9#0:D9'Q'Z;W +MN>?^+(09"0E3B?:WWW[+DKUJU6IR1JO8WY$PR`%)Q@!!2L?HON#BK8[1SN=- +MP]'8V$A4>.#3_8$''B1&7GYY#='FRQ4( +M"PLGVE]]M0]OOODW`%945]=@YLQ[<>1(#FZ__7:&QF@T2G"#(F?9R7`3O,LQ +M2Y<^CD\_W'"A5]89T-'CN1`I5)!J]6BM+04'W[X$>KK[34XL[*^A8^/#\'3 +MU/0KT;9MU8T9,P8JE8IX)FK3ILU$BGI$1`22DA)Q\N1)3KN83&3"`T5QKW7: +MVSN84DH]^0':.K>7J'9S+J^F;SOM(/Y<21]>O?P]2I4WGIUJY]!=W= +MY%NOCQPYPGR>-6L6=NWZC,7WRR]5*"DIQ>'#AU%65L8$(8U&@_/GSQ.T.W9\ +MAB5+'L/\^0OQ^NOI3#!2J]78M6LGZ_U&@)551JBJJHKY?.S8?WFO1Z52X="A +M;-:S3Y65E;RRG<_1@!Z;Y^7ELZ[9$7)`DM$OR(Y1N"["YW+%(UX7.7&$BT?X +MI(XVIR@*/_QP$,N6/0F#P0"U6GUS91."CS_^-Q8O_A-T.AWT>CV&#X]`>'@8 +M*_GAOOON0W-S$Q8N7(`1(T9`J]5"H]$P?VJU&L'!P1@W;BR42B66+%F,Y.3? +M(3@X&#I=#RU-TZ!I&FJU&F%AH7CTT26X>+&&(Y&A1_>VMC9$1T +M#H,A&&^__7=&=FWM100&!B(Z.@K1T5'P\_-%75T=R^85%16(BHI$5%0DHJ.C +M6*GOU#OOOF5]8?E**!72QZ:A]KS3;_UZI'>,_3LWLEI[NR:QCM$[SHWZFCCB +MJ;,Z]P8C[[!Y#Y^\"\#-XUIAH3;?NGTKE&8+K/_8N*'?KE6('8>8__889+/U +L'4/M-R?%0?)`8HA=3@\\=%%#S78*&O@_Q_*6F_+5?!\`````245.1*Y"8((` +` +end --- gnome-session-2.25.90.orig/debian/55gnome-session_gnomerc +++ gnome-session-2.25.90/debian/55gnome-session_gnomerc @@ -0,0 +1,12 @@ +# If we are running the GNOME session, source ~/.gnomerc + +BASESTARTUP=`basename "$STARTUP" | cut -d\ -f1` +if [ "$BASESTARTUP" = gnome-session -o \ + \( "$BASESTARTUP" = x-session-manager -a \ + "`readlink /etc/alternatives/x-session-manager`" = \ + /usr/bin/gnome-session \) ]; then + GNOMERC=$HOME/.gnomerc + if [ -r "$GNOMERC" ]; then + . "$GNOMERC" + fi +fi --- gnome-session-2.25.90.orig/debian/gnome-wm +++ gnome-session-2.25.90/debian/gnome-wm @@ -0,0 +1,118 @@ +#! /bin/sh + +# The user can specify his prefered WM by setting the WINDOW_MANAGER +# environment variable or setting the +# /desktop/gnome/applications/window_manager/default gconf key. +# +# This script has been heavily modified to support Debian's +# alternatives system. + +# sm-client-id value +SMID= +# default-wm value +DEFWM= + +#read in the arguments +GET= +for n in "$@" ; do + case "$GET" in + smid) + SMID=$n + GET= + ;; + defwm) + DEFWM=$n + GET= + ;; + *) + case "$n" in + --sm-client-id) + GET=smid + ;; + --default-wm) + GET=defwm + ;; + esac + ;; + esac +done + +# Get previously set window manager in gconf +if [ ! "$DEFWM" ]; then + DEFWM=`gconftool-2 -g /desktop/gnome/applications/window_manager/default 2>/dev/null` +fi + +if ! which "$WINDOW_MANAGER" > /dev/null; then + # Get --default-wm + if which "$DEFWM" > /dev/null; then + WINDOW_MANAGER=$DEFWM + if [ "$WINDOW_MANAGER" = x-window-manager ]; then + WINDOW_MANAGER=`readlink /etc/alternatives/x-window-manager 2>/dev/null` + fi + # if nothing is found, first use metacity + elif [ -x /usr/bin/metacity ]; then + WINDOW_MANAGER=/usr/bin/metacity + elif [ -x /usr/bin/compiz ]; then + WINDOW_MANAGER=/usr/bin/compiz + elif [ -x /usr/bin/sawfish ]; then + WINDOW_MANAGER=/usr/bin/sawfish + else + WINDOW_MANAGER=`readlink /etc/alternatives/x-window-manager 2>/dev/null` + fi +fi + +# If no window manager can be found, we default to xterm +if [ ! "$WINDOW_MANAGER" ]; then + echo "WARNING: No window manager can be found." + WINDOW_MANAGER=`readlink /etc/alternatives/x-terminal-emulator 2>/dev/null` +fi + +# If there is no xterm, they're really screwed. +if [ ! "$WINDOW_MANAGER" ]; then + echo "ERROR: No window manager and no xterm!" + exit 1 +fi + +# Now create options OPT1 and OPT2 based on the windowmanager used +OPT1= +OPT2= +if [ ! -z "$SMID" ] ; then + case `basename "$WINDOW_MANAGER"` in + sawfish) + OPT1=--sm-client-id=$SMID + CURRENT=Sawfish + ;; + compiz) + OPT1=--sm-client-id + OPT2=$SMID + CURRENT=compiz + ;; + metacity) + OPT1=--sm-client-id=$SMID + CURRENT=metacity + ;; + enlightenment|twm) + OPT1=-clientId + OPT2=$SMID + CURRENT=Enlightenment + ;; + fvwm|fvwm2) + OPT1=--clientid + OPT2=$SMID + CURRENT=fvwm + ;; + openbox) + OPT1=--sm-client-id + OPT2=$SMID + CURRENT=openbox + ;; + esac +fi + +# Store the selected WM with gconf +gconftool-2 -t string -s /desktop/gnome/applications/window_manager/current "$WINDOW_MANAGER" + +exec "$WINDOW_MANAGER" $OPT1 $OPT2 + +echo "ERROR: No window manager could run!" +exit 1 --- gnome-session-2.25.90.orig/debian/changelog +++ gnome-session-2.25.90/debian/changelog @@ -0,0 +1,2211 @@ +gnome-session (2.25.90-0ubuntu1) jaunty; urgency=low + + * New upstream version (LP: #325424): + - Install autostart files in /etc/xdg/autostart. + - Use 22x22 icons in the splash screen. + - Fix a crash in the splash screen. + - Fix build when XTest is not available. + * 98_autotools.patch: + - New version update. + + -- Chris Coulson Wed, 04 Feb 2009 18:20:16 +0000 + +gnome-session (2.25.5-0ubuntu1) jaunty; urgency=low + + * New upstream version (LP: #319043): + - Close ICE connection for qt3 apps. + - In all phases before Applications, consider process + termination as completion. + - Fix gnome-session not looking at $XDG_DATA_HOME/applications + - Correctly handle X-GNOME-Autostart-enabled=false in + gnome-session-properties. + - Add NoDisplay=True to desktop files. + - Double click startup program entry to open edit dialog in + gnome-session-properties. + - Add a presence DBus API. + - Updated translations. + * Dropped debian/patches/82_gnome_wm_no_display.patch: + - Merged upstream. + * debian/patches/98_autotools.patch: + - New version update. + * debian/control{.in}: + - Build-depend on libxtst-dev + + -- Chris Coulson Mon, 19 Jan 2009 23:37:35 +0000 + +gnome-session (2.25.3-0ubuntu2) jaunty; urgency=low + + * debian/patches/81_gnome_wm_install.patch: + - Updated patch to install gnome-wm.desktop in + /usr/share/applications as opposed to the autostart + directory. gnome-session doesn't look in the autostart + directories for required components. This doesn't stop + gnome-wm from starting, but just results in an error message. + Fixes LP: #316958. + * debian/patches/82_gnome_wm_no_display.patch: + - Don't display gnome-wm.desktop in menu + * debian/patches/98_autotools.patch: + - Updated. + + -- Chris Coulson Thu, 15 Jan 2009 20:54:26 +0000 + +gnome-session (2.25.3-0ubuntu1) jaunty; urgency=low + + * New upstream version (LP: #314540): + - Make the session properties dialog resizeable. + - Don't try to print an undefined error message. + - Rewrite the application finding code for the manager. + - Add new dbus api to say whether shutdown dialog is available. + - Remove compat wrapper for gnome-keyring session interaction. + - Address issue with multiple clients trying to use the + QueryEndSession dbus API. + - Stop using deprecated API. + - Remove libgnomeui dependency. + * debian/control{.in}: + - Dropped build-depends on libgnomeui-dev. + - Dropped build-depends on gnome-keyring and libgnome-keyring-dev. + * debian/patches/98_autotools.patch: + - Recreated for new upstream version. + * debian/copyright: + - Added new authors. + + -- Chris Coulson Tue, 06 Jan 2009 22:42:51 +0000 + +gnome-session (2.24.1-0ubuntu1) intrepid; urgency=low + + * New upstream version: + - Add GTK and GNOME categories to session-properties.desktop + - Fix leaks + - Rename variable to avoid symbol conflict + - Fix padding and spacing, and make the dialog resizable in + gnome-session-properties + - Make the strings appear translated in gnome-session-properties + + -- Sebastien Bacher Wed, 22 Oct 2008 13:43:22 +0200 + +gnome-session (2.24.0-0ubuntu1) intrepid; urgency=low + + * New upstream version + - Convert the username to UTF-8 in the logout dialog + - Fix leaks + - Turn off debugging by default + * debian/patches/70_no_verbose_debug.patch: + - the change is in the new version + + -- Sebastien Bacher Tue, 23 Sep 2008 09:44:42 +0200 + +gnome-session (2.23.92-0ubuntu2) intrepid; urgency=low + + * debian/patches/70_no_verbose_debug.patch: + - don't enable verbose debugging by default to not flood the syslogs + (lp: #268733) + + -- Sebastien Bacher Thu, 18 Sep 2008 14:58:36 +0200 + +gnome-session (2.23.92-0ubuntu1) intrepid; urgency=low + + * New upstream version: + - Make all desktop files translatable + - Avoid gnome-wm launching itself in loop + - Remove required components from the default session + - Rename /desktop/gnome/session/required_components key + - Do not use dash but underscore to separate words in gconf keys + * debian/gnome-session.gconf-defaults: + - set gnome-wm as default wm there + * debian/patches/01_fix_session_xsmp.patch: + - the change is not required + * debian/patches/81_gnome_wm_install.patch: + - install gnome-wm again + * debian/patches/98_autotools.patch: + - required autotools update + + -- Sebastien Bacher Wed, 10 Sep 2008 00:19:54 +0200 + +gnome-session (2.23.91-0ubuntu1) intrepid; urgency=low + + * New upstream version: + - Fixed #548710, metacity is not respawned when dies + - Fixed #548909, compilation fix + - Fixed #548980, make non-fatal errors are treated as such + - Fixed #548982, do not set a11y gtk modules if at registry could not be + started + - Honor the list of required apps in the list key instead of loading all + component keys in the dir + - Look in app dirs for required components + - Do not use and install gnome-wm by default + - Add command line option to override the gconf key used to look up + the default session + - Fix add/edit dialog of the capplet (lp: #260910) + - Fix leaks + - Code cleanups + - Fixed #546863, make sure there is a session bus running + - Fixed #550211, add --logout, --force-logout, --logout-dialog and + --shutdown-dialog arguments to gnome-session-save, and deprecate --kill + - Fixed #542880, set GNOME_DESKTOP_SESSION_ID environment variable for + compatibility reasons + - Fixed #547272, make gnome-keyring-daemon work correctly again + in the session + + -- Sebastien Bacher Tue, 02 Sep 2008 10:16:44 +0200 + +gnome-session (2.23.90-0ubuntu2) intrepid; urgency=low + + * debian/patches/80_new_upstream_session_dialog.patch: + - bugzilla patch to change the session dialog + + -- Sebastien Bacher Tue, 02 Sep 2008 13:51:09 +0200 + +gnome-session (2.23.90-0ubuntu1) intrepid; urgency=low + + * New upstream version: + - Remove inhibitors for the client when it disconnects + - Add log/debugging framework + - Add signal handling framework + - Add support for stopping/killing apps + - Add command line option to override autostart dirs + - Improve QES,ES,CES error handling + - Remove gnome-login-sound + - Rework the capplet dialogs to use gobject. + - Make gnome-session-save tool use D-Bus API + - Fixed #521413, Fixes for sparse warnings in gnome-session + - Fixed #546410, splash no longer disappear (lp: #258046) + - Fixed #546439, missing include for pid_t + - Fixed #546722, Need bump dbus-glib dependency to 0.76 + - Fixed #546896, crash wen passing null strings + to key_file_set_locale_string + - Fixed #547069, [patch] Logout by sending XSMP SaveYourselfRequest + is broken + - Fixed #547443, crashes on desktop parsing errors + - Fixed #547619, gnome-session 2.23.6 doesn't compile on Solaris + - Fixed #547769, part of gnome-wm potentially can break + - Fixed #548129, gnome-session-properties + doesn't create ~/.config/autostart (lp: #258145) + - Fixed #548259, g-s thinks that metacity is 'not responding' + if it was --replace'd + * debian/control.in: + - updated dbus-glib requirement + * debian/patches/80_correct_gerror_use.patch: + - the issue is fixed in the new version + + -- Sebastien Bacher Wed, 20 Aug 2008 21:15:53 +0200 + +gnome-session (2.23.6-0ubuntu2) intrepid; urgency=low + + * debian/patches/80_correct_gerror_use.patch: + - correctly initialise gerror so using it doesn't lead to a crash + (lp: #257250) + + -- Sebastien Bacher Tue, 12 Aug 2008 17:11:39 +0200 + +gnome-session (2.23.6-0ubuntu1) intrepid; urgency=low + + [ Sebastien Bacher ] + * New upstream version: + General + - dbus_based branch redesign moved to trunk + http://live.gnome.org/SessionManagement/GnomeSession. + Session Manager + - New D-Bus API + - Set environment variables in session bus activation environment + + [ Michael Vogt ] + * debian/patches/01_fix_session_xsmp.patch: + - ported to the new code + + -- Michael Vogt Fri, 08 Aug 2008 14:24:14 +0200 + +gnome-session (2.23.5-0ubuntu2) intrepid; urgency=low + + * support SmInteractStyleNone again (LP: #252483), reported to + upstream as http://bugzilla.gnome.org/show_bug.cgi?id=545123 + + -- Michael Vogt Mon, 28 Jul 2008 12:08:02 +0200 + +gnome-session (2.23.5-0ubuntu1) intrepid; urgency=low + + * New upstream version: + Session Manager + - Provide a CanShutdown D-Bus method so that other apps are able to + query session manager if it's a Shutdown D-Bus call is possible + - Fix a crasher in a debut output + - Check if VT is available before adding "Switch user" button + - Use the right icon names for logout and shutdown + - Dither splash background for 16bpp display users + Session Properties Capplet + - Sort applications by name + - Remove debug message + - Properly escape application descriptions + + -- Sebastien Bacher Wed, 23 Jul 2008 12:46:25 +0200 + +gnome-session (2.23.4.1-0ubuntu1) intrepid; urgency=low + + * New upstream version: + General + - Don't use "capplet" anywhere as this term shouldn't used anymore + Session Manager + - Properly mark logout/shutdown dialog primary text for translation + - Fix some invalid reads and a leak reported by valgrind + - Add support for ConsoleKit reboot and shutdown + - Avoid spamming the console with error messages when GDM is not available + - Check availability of GDM to know if we can add "Switch User" button + to logout dialog + Session Properties Capplet + - Add bevel to list of startup apps on session properties capplet + * debian/control.in: + - breaks on gnome-panel (<< 1:2.23) due to the session changes + - build-depends on libpolkit-gnome-dev (>= 0.7) + + -- Sebastien Bacher Mon, 14 Jul 2008 11:48:27 +0100 + +gnome-session (2.23.3-0ubuntu1) intrepid; urgency=low + + * New upstream version + * debian/control.in: + - don't Build-Depends on esound, libwrap0-dev, libnotify-dev, + gnome-settings-daemon-dev + - don't generate an automatic depends on the new gnome-control-center + - new Build-Depends on libglade2-dev, libstartup-notification0-dev, + xtrans-dev + - updated maintainer information + * debian/default.session: + - dropped, deprecated in the new version + * debian/gnome-session.install: + - don't install the debian gnome-wm variant + * debian/patches/01_ignore-gdm-lang.patch, + debian/patches/02_gsd-spawn.patch, + debian/patches/02_no_warning_crash.patch, + debian/patches/03_powermanagement.patch, + debian/patches/08_ubuntu_use_apport_on_crash.patch, + debian/patches/10_update_notifier.patch, + debian/patches/20_dont_fade_on_ltsp_client.patch: + - dropped, deprecated in the new version + * debian/patches/90_autoconf-autoheader.patch: + - dropped, there is no change requiring to run those + * Sync on Debian + + -- Sebastien Bacher Tue, 03 Jun 2008 22:17:12 +0200 + +gnome-session (2.22.2-1) unstable; urgency=low + + [ Josselin Mouette ] + * Drop dependency on gnome-power-manager. Closes: #472202. + + [ Sam Morris ] + * Refresh 01_ignore-gdm-lang.patch, 02_gsd-spawn.patch, 09_splash_hide.patch + and 90_autoconf-autoheader.patch. + + [ Josselin Mouette ] + * New upstream release, includes migration of the trash to the new + location. + + -- Josselin Mouette Wed, 28 May 2008 02:10:26 +0200 + +gnome-session (2.22.0-2) unstable; urgency=low + + * Upload to unstable. + + -- Sebastian Dröge Wed, 19 Mar 2008 02:34:13 +0100 + +gnome-session (2.22.0-1) experimental; urgency=low + + [ Josselin Mouette ] + * default.session: remove gnome-cups-icon from the default session. + + [ Loic Minier ] + * Update 02_gsd-spawn's header to give a bottom line explanation on the + rationale for the change as I keep forgetting why we need tihs. + + [ Josselin Mouette ] + * 02_gsd-spawn.patch: fix cosmetic issues asked by upstream. + + [ Sebastian Dröge ] + * New upstream stable release: + + Upload to experimental first because of intrusive changes. + + debian/control.in: + - Update build dependencies and dependencies. + + debian/patches/02_gsd-spawn.patch: + - Updated to apply cleanly again. + + debian/patches/90_from_bugzilla_fix_session_sounds.patch: + - Dropped, merged upstream. + + debian/patches/90_autoconf-autoheader.patch: + - Regenerated for the new version. + + -- Sebastian Dröge Sun, 16 Mar 2008 19:58:07 +0100 + +gnome-session (2.20.3-2) unstable; urgency=low + + [ Loic Minier ] + * Include CDBS' utils. + + [ Josselin Mouette ] + * 02_gsd-spawn.patch: updated to spawn gsd through g_spawn while + still waiting for it to answer to dbus before proceeding. This + avoids a race condition leading to applications being started + before g-s-d is ready. Closes: #454149, #465483. + + -- Josselin Mouette Sat, 16 Feb 2008 14:44:50 +0100 + +gnome-session (2.20.3-1) unstable; urgency=low + + [ Josselin Mouette ] + * 90_from_bugzilla_fix_session_sounds.patch: fork the shell that + encapsulates esd in the root directory, so that the home directory + can be safely umounted upon logout. + + [ Sebastian Dröge ] + * New upstream release with translation updates. + * Update Standards-Version to 3.7.3, no additional changes needed. + * 90_autoconf-autoheader.patch: regenerated. + * Build depend on gnome-keyring as configure checks for the + gnome-keyring-daemon binary. + + -- Sebastian Dröge Sat, 12 Jan 2008 07:16:22 +0100 + +gnome-session (2.20.2-1) unstable; urgency=low + + [ Josselin Mouette ] + * gnome-wm: + + Fix indentation. + + Support for compiz. Closes: #448560, thanks Andreas Klöckner. + + Also use compiz if metacity is unavailable. + * 02_gsd-spawn.patch: spawn gnome-settings-daemon using g_spawn + instead of DBus. Closes: #339785. + * Require libgnome-settings-daemon-dev 1:2.20.1-2 to obtain the g-s-d + path from pkgconfig. + * Switch to quilt for patch handling. + + Refresh 01_ignore-gdm-lang.patch. + * 90_autoconf.patch: re-run autoconf and autoheader in the sources. + * Add some references in the patch headers. + + [ Loic Minier ] + * Only suggest desktop-base; the desktop meta packages should pull branding, + not gnome-session and gnome-session has a default branding anyway. + * New patch, 02_no_warning_crash, doesn't make critical warnings fatal when + the version number has 3 dots as in dev releases as this makes the desktop + too unstable. + * New upstream stable release; translation updates. + - Update patch 90_autoconf. + * Don't force an upper bound in gnome-control-center versions as this makes + updates too hard; some configuration might be missing in the interim, but + the session should still start properly. + * Rename README.debian to README.Debian. + * Disable the splash screen by default to speed up login and document how to + enable it in README.Debian. + * New patch, 10_update_notifier, adds update-notifier to the list of known + applications. + * New patch, 09_splash_hide, hides splash screen unconditionally when all + apps have been launched as to avoid it staying visible with broken apps. + * New patch, 03_powermanagement, shows hibernate option in logout dialog if + gdm supports it; will probably disappear with either the gnome-session or + the gdm rewrite. + * New patch, 90_from_bugzilla_fix_session_sounds, fixes playback of session + sounds; GNOME #466458. + * Refresh patches 03_powermanagement, 09_splash_hide, and 10_update_notifier + to apply cleanly. + * Rename patch 90_autoconf to 90_autoconf-autoheader to clarify that both + autoconf and autoheader need to be run. + + -- Josselin Mouette Wed, 28 Nov 2007 16:01:56 +0100 + +gnome-session (2.20.1-1) unstable; urgency=low + + * New upstream bugfix release. + + -- Sebastian Dröge Fri, 26 Oct 2007 12:21:23 +0200 + +gnome-session (2.20.0-2) unstable; urgency=low + + * Conflict with bug-buddy << 2.20 for breakpad support. + Closes: #443638. + * 01_ignore-gdm-lang.patch: ignore GDM_LANG. This only serves the + purpose to break anything that modifies locale settings. + Closes: #445646. + + -- Josselin Mouette Thu, 11 Oct 2007 22:35:32 +0200 + +gnome-session (2.20.0-1) unstable; urgency=low + + [ Josselin Mouette ] + * default.session: don't run vino-session as gnome-session has + included this feature for 3 years, d'uh. + + [ Sebastian Dröge ] + * New upstream release, no API changes: + + Clarifies session saving text (Closes: #259718). + * Upload to unstable, drop check-dist include. + * debian/control.in: + + Build depend on libgtk2.0-dev (>= 2.11.1) because gdk_window_set_opacity + was added in that version but configure checks for >= 2.3.1. + + -- Sebastian Dröge Thu, 20 Sep 2007 12:38:07 +0200 + +gnome-session (2.19.5-1) experimental; urgency=low + + * New upstream development releases. + - Target at experimental; include check-dist. + - Add a libglib2.0-dev (>= 2.13.0) build-dep. + - Drop patch 01_splash-memory-corruption, merged upstream. + - New patch, 60_dates-no-padding, fixes build on the 8th and 9th of the + month and in August and September; GNOME #454797. + * Drop obsolete patch to display a warning when switching from GNOME 1 to + GNOME 2, 02_conversion. + * Uuencode debian/gnome-debian-splash.png instead of shipping it as a SNG; + this makes the file smaller; build-depend on sharutils (priority standard) + instead of sng (priority optional). + * New upstream development release; bug fixes and translations. + - Drop patch 60_dates-no-padding; fixed differently upstream. + + -- Loic Minier Tue, 10 Jul 2007 18:44:14 +0200 + +gnome-session (2.18.3-1) unstable; urgency=low + + * New upstream stable release; translation. + + -- Loic Minier Fri, 06 Jul 2007 23:08:26 +0200 + +gnome-session (2.18.2-2) unstable; urgency=low + + * default.session: remove gnome-volume-manager, it is now run through + the autostart facility. + * gnome-wm: add support for openbox (closes: #429729). + * 01_splash-memory-corruption.diff: patch from upstream r4382, + backported by Michel Dänzer. Fixes memory corruption with some + icons (closes: #430630, #425742). + + -- Josselin Mouette Wed, 27 Jun 2007 21:28:43 +0200 + +gnome-session (2.18.2-1) unstable; urgency=low + + * New upstream stable release. + - Drop patch 01_clever_save; merged upstream. + + -- Loic Minier Mon, 28 May 2007 16:18:59 +0200 + +gnome-session (2.18.0-2) unstable; urgency=low + + [ Sven Arvidsson ] + * Add the only missing manpage (Closes: #252006) + + [ Josselin Mouette ] + * 01_clever_save.diff: stolen from upstream's SVN. Be more clever when + saving the session, so that e.g. multiple xterms are not forgotten. + Closes: #364463. + + -- Josselin Mouette Tue, 15 May 2007 20:45:31 +0200 + +gnome-session (2.18.0-1) unstable; urgency=low + + * New upstream major stable release; fixes and translations. + - Pass --with-at-spi-registryd-directory=/usr/lib/at-spi to configure. + - Drop patches 05_session_save, 07_kill_esd, merged upstream. + * Upload to unstable; drop check-dist include. + * Wrap build-deps and deps. + * Bump up Debhelper compatibility level to 5. + * Fix URL in copyright. + * Set LDFLAGS directly instead of via DEB_CONFIGURE_SCRIPT_ENV; build-dep on + cdbs >= 0.4.41. + * Prepend -z defs to LDFLAGS for additional safety. + * Rewrite rules generating the PNG splash; misc cleanups. + * Fix copyright to really document licensing and copyright holders. + + -- Loic Minier Sun, 22 Apr 2007 15:23:12 +0200 + +gnome-session (2.16.3-2) experimental; urgency=low + + * Merge SVN 2.14.3-1 up-to 2.14.3-6; r7581:8951. + - Drop patch 06_ro_po, merged upstream. + + -- Loic Minier Sat, 17 Mar 2007 12:24:06 +0100 + +gnome-session (2.16.3-1) experimental; urgency=medium + + [ Josselin Mouette ] + * Quote the readlink call to handle the case where the + x-session-manager alternative is broken (closes: #403931). + * Medium urgency because it has the potential to cause all X sessions + to fail starting. + + [ Loic Minier ] + * Add a get-orig-source target to retrieve the upstream tarball. + * Include the new check-dist Makefile to prevent accidental uploads to + unstable; bump build-dep on gnome-pkg-tools to >= 0.10. + * New upstream stable release; bug fixes and translations. + + -- Loic Minier Sat, 17 Mar 2007 12:04:03 +0100 + +gnome-session (2.16.2-1) experimental; urgency=low + + [ Josselin Mouette ] + * New upstream release. + * gnome-debian-splash.sng: updated. + * Update build-dependencies. + * Build-depend on libdbus-glib-1-dev and libgnome-keyring-dev. + * 03_implicit_conversion.diff: removed, integrated upstream. + * 05_session_save.diff: patch the session properties capplet. + + Add a "save current session" button. + + Remove the "ask on exit" checkbox, as it isn't used anymore. + + Add 36 translations based on the existing ones (minus the "- "). + + Remove the annoying "session saved" dialog from the session + manager. + + [ Loic Minier ] + * Fix watch file to track stable releases and use HTTP. + + [ Josselin Mouette ] + * Build-depend on libgnome-settings-daemon-dev. + * Tighten dependencies on gnome-control-center with ${gnome:Version}. + * Require gnome-pkg-tools 0.6. + * Call gnome-version.mk. + * 04_manpages.diff: removed, integrated upstream. + * 05_session_save.diff: update patch for new version. + + -- Josselin Mouette Mon, 27 Nov 2006 20:43:07 +0100 + +gnome-session (2.14.3-6) unstable; urgency=low + + * Add a get-orig-source target to retrieve the upstream tarball. + + -- Loic Minier Sat, 13 Jan 2007 23:30:57 +0100 + +gnome-session (2.14.3-5) unstable; urgency=medium + + * Quote the readlink call to handle the case where the + x-session-manager alternative is broken (closes: #403931). + * Medium urgency because it has the potential to cause all X sessions + to fail starting. + + -- Josselin Mouette Wed, 20 Dec 2006 21:37:44 +0100 + +gnome-session (2.14.3-4) unstable; urgency=low + + * 06_ro_po.diff: new Romanian translation from Eddy Petrișor + (closes: #403595). + + -- Josselin Mouette Tue, 19 Dec 2006 21:25:14 +0100 + +gnome-session (2.14.3-3) unstable; urgency=low + + * gnome-debian-splash.sng: grab new version, without the "2.14" + string. + * 05_session_save.diff: pack the "save session" button correctly. + + -- Josselin Mouette Tue, 10 Oct 2006 19:14:02 +0200 + +gnome-session (2.14.3-2) unstable; urgency=low + + * 05_session_save.diff: patch the session properties capplet. + + Allow editing of sessions (bugzilla #336820). + + Add a "save current session" button. + + Remove the "ask on exit" checkbox, as it isn't used anymore. + + Add 36 translations based on the existing ones (minus the "- "). + + Remove the annoying "session saved" dialog from the session + manager. + + -- Josselin Mouette Wed, 4 Oct 2006 22:26:30 +0200 + +gnome-session (2.14.3-1) unstable; urgency=low + + * New upstream release. + - Drop 01_create_autostart patch, merged upstream. + * Suggest gnome-user-guide | gnome2-user-guide. (Closes: #371106, #371107, + #371108, #371109, #371110, #371111, #371112, #371113, #371114, #371115, + #371116, #371117, #371118, #371119, #371120, #371121, #371122, #371123, + #371124, #371125, #371126, #371127, #371128, #371129, #371130, #371131, + #371132, #371133) + + -- Loic Minier Tue, 8 Aug 2006 11:15:38 +0200 + +gnome-session (2.14.2-1) unstable; urgency=low + + * New upstream release. + + -- Loic Minier Wed, 31 May 2006 18:36:45 +0200 + +gnome-session (2.14.1-2) unstable; urgency=low + + * 03_implicit_conversion.diff: Fix for implicit conversion + (closes: #368062). + + -- Josselin Mouette Thu, 25 May 2006 00:49:18 +0200 + +gnome-session (2.14.1-1) unstable; urgency=low + + * New upstream release. + * Standards-version is 3.7.2. + * 07_kill_esd.diff: updated. + * Build-depend on libwrap0-dev. + + -- Josselin Mouette Thu, 18 May 2006 07:51:21 +0200 + +gnome-session (2.14.0-2) unstable; urgency=low + + * Update watch file. + * 01_create_autostart.diff: create the autostart directory when it + doesn't exist (closes: #360590, #360431). + + -- Josselin Mouette Fri, 7 Apr 2006 09:59:27 +0200 + +gnome-session (2.14.0-1) unstable; urgency=low + + [ Loic Minier ] + * Launch esd with a cwd of "/" to avoid blocking pam_mount / pam_umount, + thanks Daniel Kahn Gillmor. (Closes: #335944) + [debian/patches/07_kill_esd.diff] + + [ Josselin Mouette ] + * New upstream release. + * Build-depend on libnotify-dev. + * Enable IPv6. + * gnome-debian-splash.sng: update for GNOME 2.14. + * 02_conversion.diff: updated for the new version. + * Build-depend on libgnome-desktop-dev. + + -- Josselin Mouette Sat, 1 Apr 2006 16:58:40 +0200 + +gnome-session (2.12.0-4) unstable; urgency=low + + * Only depend on dbus, dbus-1-utils isn't necessary. + * rules: don't remove empty directories (really closes: #340765). + + -- Josselin Mouette Sun, 22 Jan 2006 15:35:55 +0100 + +gnome-session (2.12.0-3) unstable; urgency=low + + * 03_splash.diff: removed. + * gconf-defaults: ship the defaults here. + * control.in: require debhelper 5.0.13. + + -- Josselin Mouette Sun, 8 Jan 2006 12:02:30 +0100 + +gnome-session (2.12.0-2) unstable; urgency=low + + * dirs: create /usr/share/images/desktop-base (closes: #340765). + * Upload to unstable. + + -- Josselin Mouette Sun, 8 Jan 2006 01:27:42 +0100 + +gnome-session (2.12.0-1) experimental; urgency=low + + * New upstream release. + * Edit upstream logo to add the debian swirl: + + Add it, using the sng format. + + Build-depend on sng. + + Call sng in the build target. + + Install it in /usr/share/pixmaps/splash/. + + 03_splash.diff: use it by default. + + Add it to the desktop-base alternative. + + Only recommend desktop-base. + * 02_conversion.diff: update to apply cleanly. + * Update watch file. + + -- Josselin Mouette Sun, 9 Oct 2005 03:19:58 +0200 + +gnome-session (2.10.0-8) unstable; urgency=low + + * rules: set --as-needed again. + * Rebuild against the latest gconf2 (closes: #330476, #330913). + * Build-depend on gconf2 2.10.1-6. + + -- Josselin Mouette Mon, 3 Oct 2005 20:57:52 +0200 + +gnome-session (2.10.0-7) unstable; urgency=medium + + * The "now all dependencies in GNOME are back to the old times + madness, why not do the same here?" release. + * rules: remove --as-needed (closes: #325639). + * default.session: + + Remove gnome-smproxy. It slows down the startup process and + sometimes hangs. + + Remove magicdev, which is deprecated. + + -- Josselin Mouette Sun, 4 Sep 2005 11:13:41 +0200 + +gnome-session (2.10.0-6) unstable; urgency=high + + Matt Kraai : + * Added a build-dependency on libxau-dev to fix FTBFS. (Closes: #323327) + + Loic Minier : + * Recommend the dbus-1-utils package as it is xorg starts a dbus session by + default now (use-session-dbus in /etc/X11/Xsession.options). + (Closes: #320015) + + -- J.H.M. Dassen (Ray) Sun, 28 Aug 2005 14:52:19 +0200 + +gnome-session (2.10.0-5) unstable; urgency=medium + + * Depend on gnome-control-center instead of capplets. + * Remove unuseful conflicts field. + * Fix a typo in the description (closes: #299992). + * Standards-version is 3.6.2. + + -- Josselin Mouette Sat, 25 Jun 2005 19:11:59 +0200 + +gnome-session (2.10.0-4) unstable; urgency=low + + * Undo previous changes, we are renaming the menus. + + -- Sebastien Bacher Thu, 9 Jun 2005 11:53:39 +0200 + +gnome-session (2.10.0-3) unstable; urgency=low + + * 70gnome-session_menus: set the XDG_CONFIG_DIRS environment variable, so + that the menus use GNOME's implementation. + * gnome-session.install: install the file in /etc/X11/Xsession.d. + + -- Josselin Mouette Wed, 8 Jun 2005 23:09:56 +0200 + +gnome-session (2.10.0-2) unstable; urgency=low + + * Upload to unstable. + * Update debian/watch. + * rules: avoid the LDFLAGS hack overwriting all environment. + + -- Josselin Mouette Tue, 7 Jun 2005 21:47:24 +0200 + +gnome-session (2.10.0-1) experimental; urgency=low + + * New upstream release. + * Update build-dependencies. + * 06_shutdown.diff: removed, similar functionality is integrated upstream. + * 20_ca_po.diff: removed, integrated upstream. + + -- Josselin Mouette Wed, 13 Apr 2005 20:15:32 +0200 + +gnome-session (2.8.1-6) unstable; urgency=medium + + * Use --as-needed option in LDFLAGS to reduce the dependencies. + + Incidentally removes the dependency upon libhowl0 (closes: #298849). + * gnome-wm: add support for fvwm (closes: #289969). + + -- Josselin Mouette Thu, 10 Mar 2005 21:44:15 +0100 + +gnome-session (2.8.1-5) unstable; urgency=medium + + * 20_ca_po.diff: fixes to the Catalan translation. + + -- Jordi Mallach Fri, 7 Jan 2005 17:54:47 +0100 + +gnome-session (2.8.1-4) unstable; urgency=medium + + * 09_splash_hide.diff: disabled, this patch only manages to make things + worse (closes: #284090). + * postinst,prerm: install alternative for the splash image + (closes: #282653). + + -- Josselin Mouette Sun, 5 Dec 2004 19:54:49 +0100 + +gnome-session (2.8.1-3) unstable; urgency=low + + * 09_splash_hide.diff: stop displaying splash when all applications are + launched, it avoids waiting when some of them are broken. Thanks seb128. + * 07_kill_esd.diff: kill esd upon logout (closes: #187730). + + -- Josselin Mouette Tue, 23 Nov 2004 15:08:47 +0100 + +gnome-session (2.8.1-2) unstable; urgency=low + + * Forward-port changes from 2.6 branch: + + 55gnome-session_gnomerc: support arguments to gnome-session. + + control.in: + - Depend on capplets. + - Recommend nautilus, gnome-panel and a window manager. + + patches/05_debian_gnome_upgrade_check.diff, patches/00_Makefile.am.diff, + patches/01_autoreconf.diff, gnome-1-to-2, gnome-launchers-1-to-2, + gnome-panel-1-to-2, gnome-stuff-1-to-2, nautilus-666666.desktop: + removed. + + gnome-session.install: don't install those. + + rules: don't have to fix the permissions. + + 02_conversion.diff: only print a warning, don't launch the broken + upgrade script + + gnome-volume-daemon: removed, obsolete. + * Upload to unstable. + * control.in: + + Bump build-dependencies to 2.8 versions. + + Build-depend on libgconf2-dev, not gconf2. + + -- Josselin Mouette Fri, 19 Nov 2004 14:40:42 +0100 + +gnome-session (2.8.1-1) experimental; urgency=low + + * New upstream release. + * debian/patches/03_splash.diff: (change from trunk) + - use the desktop-splash alternative as the default splash + * debian/control{,.in}: (change from trunk) + - the change above required desktop-base 0.3.15, so updated + Depends + * debian/patches/00_acinclude.m4.diff: + - removed, not needed anymore + * debian/patches/01_autoreconf.patch: + - updated, result of "libtoolize --force --copy; + aclocal-1.7; autoheader; automake-1.7 -acf; autoconf; rm -rf + autom4te.cache" with the 00_ patch applied. + + -- Gustavo Noronha Silva Sun, 24 Oct 2004 12:47:32 -0300 + +gnome-session (2.8.0-1) experimental; urgency=low + + * New upstream release. + * debian/patches/01_autoreconf.patch: + - updated. + + -- Sebastien Bacher Wed, 29 Sep 2004 21:43:42 +0200 + +gnome-session (2.6.2-5) unstable; urgency=low + + * 06_shutdown.diff: test for /var/run/gdm.pid (closes: #261969). + + -- Josselin Mouette Sat, 31 Jul 2004 12:23:23 +0200 + +gnome-session (2.6.2-4) unstable; urgency=low + + * 06_shutdown.diff: new, provide reboot or halt using gdmflexiserver if + available. + * rules: remove halt/reboot configure switches. + + -- Josselin Mouette Mon, 26 Jul 2004 23:22:29 +0200 + +gnome-session (2.6.2-3) unstable; urgency=low + + * Rebuild with working dh_gconf (closes: #258139, #258144). + + -- Josselin Mouette Thu, 8 Jul 2004 16:44:01 +0200 + +gnome-session (2.6.2-2) unstable; urgency=low + + * gnome-volume-daemon: + + removed, it didn't register correctly with the SM (closes: #253729). + + gnome-session.install: don't install it. + * default.session: + + start both magicdev and g-v-m, they now conflict with each other. + + -- Josselin Mouette Tue, 6 Jul 2004 22:30:07 +0200 + +gnome-session (2.6.2-1) unstable; urgency=low + + * New upstream release. + * 01_autoreconf.patch: updated, result of "libtoolize --force --copy; + aclocal-1.7; autoheader; automake-1.7 -acf; autoconf; rm -rf + autom4te.cache" with 00_ patches applied. + * gnome-volume-daemon: + + new script, runs gnome-volume-manager if available, or falls back + to magicdev. + + gnome-session.install: install it. + + rules: chmod it. + + default.session: use it instead of gnome-volume-manager. + * gnome-wm: store the window manager in the "current" gconf key, not the + "default" one. + + -- Josselin Mouette Tue, 29 Jun 2004 23:25:01 +0200 + +gnome-session (2.6.1-6) unstable; urgency=low + + * Gustavo Noronha Silva + - debian/README.Debian: + + did some small cleanups + + wrote a small explanation of why the splash screen is + different from GNOME's upstream and how to get it back + and set it up + * Josselin Mouette + - debian/default.session: + + add gnome-volume-manager, gnome-cups-icon and vino-session to the + default session. + - debian/postinst: + + make gnome-session's priority 50, to be greater than KDE. Thus the + default DM is gdm and the default session is gnome-session. + + -- Josselin Mouette Thu, 24 Jun 2004 14:02:52 +0200 + +gnome-session (2.6.1-5) unstable; urgency=low + + * Grrrr, configure doesn't check for libXmu while it is needed. Add + libxmu-dev to build-depends. + + -- Josselin Mouette Fri, 28 May 2004 15:05:42 +0200 + +gnome-session (2.6.1-4) unstable; urgency=low + + * Add explicit build dependencies on X libraries (closes: #251367). + + -- Josselin Mouette Fri, 28 May 2004 12:13:39 +0200 + +gnome-session (2.6.1-3) unstable; urgency=low + + * Upload to unstable. + * Tighten dependencies on liborbit2-dev. + + -- Josselin Mouette Wed, 26 May 2004 16:11:18 +0200 + +gnome-session (2.6.1-2) experimental; urgency=low + + * 55gnome-session_gnomerc: handle the case where we are running + x-session-manager, symlinked to gnome-session. + + -- Josselin Mouette Thu, 22 Apr 2004 11:37:15 +0200 + +gnome-session (2.6.1-1) experimental; urgency=low + + * New upstream release. + * Source .gnomerc at startup (closes: #242065): + - gnome-session.install: install 55gnome-session_gnomerc in Xsession + directory. + - 55gnome-session_gnomerc: source .gnomerc if we are running + gnome-session. + * gnome-wm: get the default window manager from gconf. It now uses the + /desktop/gnome/applications/window_manager/default key + (closes: #241361, #244694). The x-window-manager alternative is now only + used when nothing else is found. + * patches/01_autoreconf.diff: updated, result of + libtoolize --force --copy; aclocal-1.7; autoheader; automake-1.7 -acf; + autoconf; rm -rf autom4te.cache. + + -- Josselin Mouette Wed, 21 Apr 2004 17:12:10 +0200 + +gnome-session (2.6.0-3) experimental; urgency=low + + * rules: force poweroff and reboot paths (closes: #242091) + * gnome-wm: don't set the gconf key, it is unused. + + -- Josselin Mouette Wed, 7 Apr 2004 12:31:16 +0200 + +gnome-session (2.6.0-2) experimental; urgency=low + + * Move gnome-sesssion.install to gnome-session.install. + * Forward-port changes from 2.4.2-4: + + Use metacity by default: + - gnome-wm: use metacity or sawfish when it is available + - default.session: let gnome-wm discover the window manager + + docs: removed, cdbs takes care of these. + + postinst,prerm: remove gconf stuff, dh_gconf does it for us. + + control.in: require debhelper 4.1.84 + + Provide a session for the display managers: + - add gnome-session.desktop + - gnome-session.install: install it + + patches/: + - 01_configure.diff, 03_Makefile.in.diff: removed + - 00_Makefile.am.diff patches gnome-session/Makefile.am + + Use the splash screen from desktop-base by default. + - patches/03_splash.diff: for the code and gconf stuff + - control.in: depend on desktop-base. + + control.in: don't depend on debianutils, woody provides a sufficient + version. + + fix permissions: + - compat: use debhelper v4 + - rules: chmod 755 the debian scripts + * control.in: require 2.6 versions of packages. + * patches/: + + updated 00_acinclude.m4.diff includes a copy of + gnome2-macros/compiler-flags.m4 as aclocal 1.7 seems unable to + find it. + + updated 01_autoreconf.diff is the result of running + libtoolize --force --copy; aclocal; autoheader; automake -acf; + autoconf. + + update patches/03_splash.diff for the new version. + + -- Josselin Mouette Thu, 1 Apr 2004 15:33:35 +0200 + +gnome-session (2.6.0-1) experimental; urgency=low + + * New upstream release + * GNOME Team Upload + * Gustavo Noronha Silva : + + debian/control.in: + - set maintainer to Josselin Mouette + - Build-Depends on cdbs and gnome-pkg-tools + + debian/patches/*: + - converted all from dpatch to cdbs' simple-patch, some + of them were regenerated for various reasons, including + failure on apply and not including diff for Makefile.am + + debian/rules: + - use cdbs + + gnome-session.install: + - install some debian specific files that were installed + manually through debian/rules before + + -- Gustavo Noronha Silva Sun, 28 Mar 2004 13:23:41 -0300 + +gnome-session (2.4.2-2) unstable; urgency=low + + * Orphaned package. + + -- Christian Marillat Fri, 19 Mar 2004 15:50:59 +0100 + +gnome-session (2.4.2-1) unstable; urgency=low + + * New upstream release. + + -- Christian Marillat Wed, 14 Jan 2004 20:47:13 +0100 + +gnome-session (2.4.1-3) unstable; urgency=low + + * debian/prerm Unregister schemas file from the database. + + -- Christian Marillat Fri, 9 Jan 2004 15:42:34 +0100 + +gnome-session (2.4.1-2) unstable; urgency=low + + * Build with --with-window-manager=metacity (CLoses: #216769) + * Update desktop migration from .gnome-desktop to Desktop + * Update Build-dependencies to GNOME 2.4 packages + + -- Christian Marillat Sat, 1 Nov 2003 16:45:42 +0100 + +gnome-session (2.4.1-1) unstable; urgency=low + + * New upstream release. + + -- Christian Marillat Sat, 18 Oct 2003 17:27:21 +0200 + +gnome-session (2.2.2-4) unstable; urgency=low + + * Fix broken manpage (thanks to Marcin Owsiany) (Closes: #204604) + + -- Christian Marillat Sun, 10 Aug 2003 20:10:08 +0200 + +gnome-session (2.2.2-3) unstable; urgency=low + + * Fix typo in gnome-session.1 (Closes: #192575) + + -- Christian Marillat Mon, 14 Jul 2003 15:25:48 +0200 + +gnome-session (2.2.2-2) unstable; urgency=low + + * Add changes from Greg Hudson for conversion scripts. Thanks. + + -- Christian Marillat Wed, 28 May 2003 21:55:00 +0200 + +gnome-session (2.2.2-1) unstable; urgency=low + + * New upstream release. + + -- Christian Marillat Fri, 16 May 2003 17:22:21 +0200 + +gnome-session (2.2.1-1) unstable; urgency=low + + * New upstream release. + * Cleanup debian/prerm (Closes: #180928) + + -- Christian Marillat Tue, 11 Mar 2003 14:16:20 +0100 + +gnome-session (2.2.0.2-1) unstable; urgency=low + + * New upstream release. + * Add a note about GNOME 2 compliant window manager (Closes: #174021) + + -- Christian Marillat Tue, 4 Feb 2003 15:26:22 +0100 + +gnome-session (2.2.0.1-1) unstable; urgency=low + + * New upstream release. + + -- Christian Marillat Wed, 22 Jan 2003 13:20:07 +0100 + +gnome-session (2.1.90-1) unstable; urgency=low + + * New upstream releae. + + -- Christian Marillat Sun, 19 Jan 2003 15:27:47 +0100 + +gnome-session (2.0.9-3) unstable; urgency=low + + * FIx manpage for gnome-session-save (Closes: #171661) + + -- Christian Marillat Wed, 4 Dec 2002 12:47:04 +0100 + +gnome-session (2.0.9-2) unstable; urgency=low + + * New pacthe against gnome-session/Makefile.in to really add the binaries + conversion. + + -- Christian Marillat Wed, 27 Nov 2002 13:11:27 +0100 + +gnome-session (2.0.9-1) unstable; urgency=low + + * New upstream release. + * Fix lintian warnings with manpages. + + -- Christian Marillat Fri, 15 Nov 2002 14:26:18 +0100 + +gnome-session (2.0.8-8) unstable; urgency=low + + * Handle fully-qualified panel path in conversion script. + + -- Christian Marillat Wed, 6 Nov 2002 17:14:54 +0100 + +gnome-session (2.0.8-7) unstable; urgency=low + + * Fix wrong indentation (Closes: #167454) + + -- Christian Marillat Sat, 2 Nov 2002 19:27:57 +0100 + +gnome-session (2.0.8-6) unstable; urgency=low + + * Colin's fix : + * Correctly transitions the background + * Handles the multiload applet + * Handles aligned panels + * Tries to convert menu items + * Doesn't crash on invalid UTF-8 + * Doesn't crash on an empty launchers dir + * Me : + * Don't try to overwrite gconf gnome-terminal configuration + + -- Christian Marillat Fri, 1 Nov 2002 18:05:20 +0100 + +gnome-session (2.0.8-5) unstable; urgency=low + + * Add a note in the confirmation dialog box for how to report bugs. + + -- Christian Marillat Mon, 28 Oct 2002 21:01:02 +0100 + +gnome-session (2.0.8-4) unstable; urgency=low + + * Oops, forget to apply yesterday changes in conversion code. + + -- Christian Marillat Mon, 28 Oct 2002 17:32:53 +0100 + +gnome-session (2.0.8-3) unstable; urgency=low + + * Fix gnome-wm. Gnome don't like symlink. + * This package contains conversion scripts for GNOME 1 to GNOME 2 (Closes: #153682) + * Upload to unstable + + -- Christian Marillat Mon, 28 Oct 2002 11:34:22 +0100 + +gnome-session (2.0.8-2) experimental; urgency=low + + * Uploaded officially to experimental + + -- Christian Marillat Tue, 22 Oct 2002 18:00:11 +0200 + +gnome-session (2.0.8-1.1upgradetest) experimental; urgency=low + + * EXPERIMENTAL TESTING RELEASE + * Add upgrade scripts. + + -- Colin Walters Sat, 19 Oct 2002 22:54:05 -0400 + +gnome-session (2.0.8-1) experimental; urgency=low + + * New upstream release. + * Add metacity in gnome-wm + + -- Christian Marillat Mon, 14 Oct 2002 16:09:35 +0200 + +gnome-session (2.0.7-4) experimental; urgency=low + + * Change the default window manager in the default sesion file by + x-window-manager (was gnome-wm) + + -- Christian Marillat Wed, 9 Oct 2002 23:43:32 +0200 + +gnome-session (2.0.7-3) experimental; urgency=low + + * Upload with original tarball. + + -- Christian Marillat Sun, 29 Sep 2002 17:40:55 +0200 + +gnome-session2 (2.0.7-2) experimental; urgency=low + + * Update to standards version 3.5.7 + * Upload without the 2 suffix + * Update libgnomeui-dev build-dependency to 2.0.5-3 + + -- Christian Marillat Sat, 28 Sep 2002 17:59:43 +0200 + +gnome-session2 (2.0.7-1) experimental; urgency=low + + * New upstream release. + + -- Christian Marillat Thu, 5 Sep 2002 18:56:12 +0200 + +gnome-session2 (2.0.6-1) experimental; urgency=low + + * New upstream release. + + -- Christian Marillat Tue, 27 Aug 2002 10:38:48 +0200 + +gnome-session2 (2.0.5-3) experimental; urgency=low + + * Build against the latest gconf2 1.2.1-2.1 (Closes: #157727) + + -- Christian Marillat Thu, 22 Aug 2002 19:04:39 +0200 + +gnome-session2 (2.0.5-2) experimental; urgency=low + + * Add esound in build-depends + * Build against the latest libgnomevfs2-dev 2.0.2-4 + + -- Christian Marillat Fri, 16 Aug 2002 17:31:02 +0200 + +gnome-session2 (2.0.5-1) experimental; urgency=low + + * New upstream release. + + -- Christian Marillat Thu, 8 Aug 2002 16:28:59 +0200 + +gnome-session2 (2.0.4-1) experimental; urgency=low + + * New upstream release. + + -- Christian Marillat Mon, 5 Aug 2002 19:40:25 +0200 + +gnome-session2 (2.0.3-1) experimental; urgency=low + + * New upstream release. + * Use gconftool-2 to store window-manager preference + + -- Christian Marillat Tue, 30 Jul 2002 18:16:53 +0200 + +gnome-session2 (2.0.2-1) experimental; urgency=low + + * New upstream release. + + -- Christian Marillat Mon, 15 Jul 2002 15:20:51 +0200 + +gnome-session2 (2.0.1-1) experimental; urgency=low + + * New upstream release. + + -- Christian Marillat Mon, 17 Jun 2002 15:46:23 +0200 + +gnome-session2 (2.0.0-1) experimental; urgency=low + + * New upstream release. + + -- Christian Marillat Mon, 10 Jun 2002 16:03:08 +0200 + +gnome-session2 (1.5.21-1) experimental; urgency=low + + * new upstream release. + + -- Christian Marillat Tue, 4 Jun 2002 16:34:27 +0200 + +gnome-session2 (1.5.20-1) experimental; urgency=low + + * New upstream release. + + -- Christian Marillat Tue, 28 May 2002 15:22:12 +0200 + +gnome-session2 (1.5.19-3) experimental; urgency=low + + * debian/rules Add GCONF_DISABLE_MAKEFILE_SCHEMA_INSTALL=1 in install target. + * debian/postinst check if schemas files are present before calling + gconftool-2 + + -- Christian Marillat Mon, 27 May 2002 16:03:24 +0200 + +gnome-session2 (1.5.19-2) experimental; urgency=low + + * Fix a typo in postinst (Closes: #147600) + + -- Christian Marillat Tue, 21 May 2002 11:15:32 +0200 + +gnome-session2 (1.5.19-1) experimental; urgency=low + + * New upstream release + * Add support for DEB_HOST_GNU_TYPE DEB_BUILD_GNU_TYPE and + DEB_BUILD_OPTIONS + + -- Christian Marillat Wed, 15 May 2002 20:04:03 +0200 + +gnome-session2 (1.5.18-1) experimental; urgency=low + + * new upstream release. + + -- Christian Marillat Mon, 29 Apr 2002 20:45:49 +0200 + +gnome-session2 (1.5.17-1) experimental; urgency=low + + * New upstream release. + + -- Christian Marillat Mon, 22 Apr 2002 16:34:38 +0200 + +gnome-session2 (1.5.16-1) experimental; urgency=low + + * New upstream release. + + -- Christian Marillat Wed, 17 Apr 2002 15:41:33 +0200 + +gnome-session2 (1.5.15-1) experimental; urgency=low + + * New upstream release. + + -- Christian Marillat Mon, 1 Apr 2002 22:33:26 +0200 + +gnome-session2 (1.5.13-1) experimental; urgency=low + + * New upstream release. + + -- Christian Marillat Fri, 29 Mar 2002 16:38:29 +0100 + +gnome-session2 (1.5.11-1) experimental; urgency=low + + * new upstream release. + + -- Christian Marillat Tue, 26 Feb 2002 15:10:17 +0100 + +gnome-session2 (1.5.10-3) experimental; urgency=low + + * Fix broken postinst. Thanks to Mark Nelson. + + -- Christian Marillat Mon, 25 Feb 2002 17:44:33 +0100 + +gnome-session2 (1.5.10-2) experimental; urgency=low + + * Should build-depends on intltool + + -- Christian Marillat Mon, 25 Feb 2002 15:37:19 +0100 + +gnome-session2 (1.5.10-1) experimental; urgency=low + + * New upstream release. + + -- Christian Marillat Mon, 18 Feb 2002 22:31:35 +0100 + +gnome-session2 (1.5.9-1) unstable; urgency=low + + * New upstream release. + + -- Christian Marillat Fri, 15 Feb 2002 00:40:12 +0100 + +gnome-core2 (1.5.7-1) experimental; urgency=low + + * New upstrema release. + + -- Christian Marillat Tue, 5 Feb 2002 14:41:01 +0100 + +gnome-core2 (1.5.4-1) experimental; urgency=low + + * New upstream release. + + -- Christian Marillat Sun, 20 Jan 2002 16:21:40 +0100 + +gnome-core (1.4.0.4-16) unstable; urgency=low + + * Fix typo in gnome-terminal.wrapper (Closes: #127768) + * Remove gnome-hint patche (Closes: #121390, #129184) + * debian/control Replace libpng-dev by libpng2-dev in Build-Depends + (Closes: #128377) + + -- Christian Marillat Mon, 14 Jan 2002 15:04:52 +0100 + +gnome-core (1.4.0.4-15) unstable; urgency=low + + * Build against the latest gnome-libs to update the libzvt2 dependency + (Closes: #127309, #127271) + * debian/control Replace libpng2-dev by libpng-dev in Build-Depends. + * debian/control Build-depends on libzvt-dev (>= 1.4.1.2-9) + + -- Christian Marillat Tue, 1 Jan 2002 15:27:43 +0100 + +gnome-core (1.4.0.4-14) unstable; urgency=low + + * Fix typo in gnome-terminal.1 (Closes: #123073) + * Fix base page for doc-base in libpanel-applet-dev package. + * Fix typo in gnome-help documentation (Closes: #126566) + * Apply patch to allows meta functionnality in gnome-terminal (Closes: #50427) + + -- Christian Marillat Thu, 27 Dec 2001 14:47:36 +0100 + +gnome-core (1.4.0.4-13) unstable; urgency=low + + * Default font for gnome-terminal is "fixed" only (Closes: #117126) + * Patch against gnome-hint.c Don't use gettext for font descriptor + (Closes: #116606) + * Patch against gnome-about/Makefile.am to use new gdk_pixbuf include path + (Closes: #120312) + * Revert my change on logout.c Only root can shutdown/reboot from the + panel (Closes: #119316, #120127) + + -- Christian Marillat Tue, 20 Nov 2001 11:36:05 +0100 + +gnome-core (1.4.0.4-12) unstable; urgency=low + + * gnome-wm honour --default-wm (Closes: #115668) + * Build against the latest gnome-libs + + -- Christian Marillat Sun, 21 Oct 2001 14:11:19 +0200 + +gnome-core (1.4.0.4-11) unstable; urgency=low + + * debian/control lynx comeback in Recommends (Closes: #114142) + * debian/control replaces xml-i18n-tools by intltool (Closes: #115024) + * Fix automake 1.5 errors. Thanks to Denis Barbier (Closes: #114369) + * Build against the latest orbit (Closes: #115309) + + -- Christian Marillat Fri, 12 Oct 2001 10:46:49 +0200 + +gnome-core (1.4.0.4-10) unstable; urgency=low + + * Fix typo in panel/panel.hints (Closes: #113590) + * Replace lynx by w3m (Closes: #113613) + * Move gnome-terminal.desktop in gnome-terminal package (Closes: #113736) + * Move gnome-help.desktop in gnome-help package + * debian:control Add Replaces: gnome-panel-data (<= 1.4.0.4-9) for above + * Patch against gsm/logout.c Now you can reboot/halt your machine from the + panel. This only work for root, because shutdown doesn't understand the + -a option. Read README.debian in gnome-panel package. + * debian/rules Remove less files in clean target (Closes: #114020) + + -- Christian Marillat Mon, 1 Oct 2001 11:34:06 +0200 + +gnome-core (1.4.0.4-9) unstable; urgency=low + + * Add Debian menu for panel and gmenu (Closes: #112176) + * Remove /var/lib/gnome on purge (Closes: #113005) + * Remove /etc/gnome/config on purge (Closes: #112994) + * Remove /etc/gnome on purge (Closes: #112995) + * debian/control replace cygnus-stylesheets by docbook-utils + + -- Christian Marillat Mon, 24 Sep 2001 18:39:19 +0200 + +gnome-core (1.4.0.4-8) unstable; urgency=high + + * High urgency, because the current release in testing has a missing + dependency on libpanel-applet0 and the panel package doesn't work if + libpanel-applet0 isn't installed (Closes: #111517) + * debian/control for gnome-help, move lynx from depends to recommends + (Closes: #109652) + * debian/control gnome-panel suggests fortune-mod (Closes: #110865) + * debian/control gnome-help suggests gnome-users-guide not + gnome-users-guide-en (Closes: #111200) + * Don't change cursor color (Closes: #97697) + * Change default font for gnome-terminal (Closes: #111319) + + -- Christian Marillat Fri, 7 Sep 2001 15:06:07 +0200 + +gnome-core (1.4.0.4-7) unstable; urgency=low + + * Fix path in gnome-session.1 (Closes: #107724) + * debian/*.sgml Use docbook 4.1 + * debian/control gnome-help-data Replaces gnome-terminal (<= 1.0.55-2) + (CLoses: #107948) + + -- Christian Marillat Wed, 8 Aug 2001 08:07:56 +0200 + +gnome-core (1.4.0.4-6) unstable; urgency=low + + * debian/rules for dh_makeshlibs replace libcapplet0 by libpanel-applet0 + (Closes: #105772) + + -- Christian Marillat Wed, 18 Jul 2001 19:02:59 +0200 + +gnome-core (1.4.0.4-5) unstable; urgency=low + + * Patch against gnome-edit to use EDITOR if the default gnome editor is + unavailable. + * Remove gnome-wm patch, and move the patched file in debian/ + * debian/gnome-wm Try to exec $WINDOW_MANAGER before x-window-manager + (Closes: #103430 + * New patch from Michael Urman to hide task names in tasklist_applet + (Closes: #104587) + + -- Christian Marillat Sat, 14 Jul 2001 16:58:12 +0200 + +gnome-core (1.4.0.4-4) unstable; urgency=low + + * Gnome-help Provides: man-browser, www-browser, info-browser + * Switch to debhelper V3 + * Change libraries versionning to (>= 1.4.0.2-3) instead of the latest + package number. + * Build-depends on groff-base instead of groff + + -- Christian Marillat Fri, 22 Jun 2001 17:02:37 +0200 + +gnome-core (1.4.0.4-3) unstable; urgency=low + + * New patch: Allows to save/load the keyboard secure state (Closes: #83028) + * New patch: Remove a warning in configure + * gnome-help replace gnome-panel-data (Closes: #99499) + * Build-depends on xml-i18n-tools (>= 0.8.4.cvs.20010530-1) (Close: #98784) + + -- Christian Marillat Sat, 2 Jun 2001 14:41:45 +0200 + +gnome-core (1.4.0.4-2) unstable; urgency=low + + * New patch: Replace Distribution by Debian in configuration dialog box. + * New patch: Upstream patch to allow Debian menu in default configuration. + * New patch: Fix some wrong path. + * Move gnome-feedback doc from gnome-help-data to gnome-core. + + -- Christian Marillat Tue, 15 May 2001 15:36:51 +0200 + +gnome-core (1.4.0.4-1) unstable; urgency=low + + * New upstream release. + + -- Christian Marillat Wed, 9 May 2001 23:56:27 +0200 + +gnome-core (1.4.0.3-2) unstable; urgency=low + + * Remove debugging code (/tmp/languages file) + + -- Christian Marillat Mon, 7 May 2001 16:48:18 +0200 + +gnome-core (1.4.0.3-1) unstable; urgency=low + + * New upstream release. + * New: tooltips for long task names in tasklist_applet (Closes: #63898) + + -- Christian Marillat Thu, 3 May 2001 15:51:58 +0200 + +gnome-core (1.4.0.2-3) unstable; urgency=low + + * Fix wrong dif.gz file (Closes: #94499) + * Build against the latest lignome-dev (Closes: #95301, #95691) + * gnome-terminal should depends on gnome-bin (Closes: #95498) + * Doesn't build against gtkhtml this break fonts displaying (Closes: #92187) + + -- Christian Marillat Tue, 1 May 2001 11:03:14 +0200 + +gnome-core (1.4.0.2-2) unstable; urgency=low + + * New/old patch against manpages, never applied by upstream. + * gnome-help depends on lynx. + * Use x-terminal-emulator in gnome-download instead of xterm. + * Move gnome-convert and gnome-download from gnome-core to gnome-help. + * Move gnome-login-check from gnome-core to gnome-session. + * Move gnome-panel-add-launcher from gnome-core to gnome-panel. + * Move sesion-properties* from gnome-core to gnome-session. + * debian/control Add Replaces for the changes above. + * Write manpages (Closes: #87085) + + -- Christian Marillat Tue, 17 Apr 2001 18:54:15 +0200 + +gnome-core (1.4.0.2-1) unstable; urgency=low + + * New upstream release. + * Build-depends on latest gettext (Closes: #93198) + * Icon box in menu editor is back (Closes: #91938) + * Build-depends on latest xml-i18n-tools and libgnome-dev + + -- Christian Marillat Wed, 11 Apr 2001 15:16:20 +0200 + +gnome-core (1.4.0.1-2) unstable; urgency=low + + * Build depends on versionned gettext 0.10.35-17 (Closes: #93198) + * Write manpage for gnome-session and add docbook-to-man in build-depnds + * Write manpages for gnome-help (Closes: #87089) + + -- Christian Marillat Sat, 7 Apr 2001 15:52:40 +0200 + +gnome-core (1.4.0.1-1) unstable; urgency=low + + * New upstream release. + * debian/gnome-terminal.wrapper change -T by -t (Closes: #90847) + * debian/gnome-session.README.debian remove references to .xsession. This + is now obsolete by the new x-session-manager scheme. + + -- Christian Marillat Sun, 1 Apr 2001 15:01:51 +0200 + +gnome-core (1.4.0-2) unstable; urgency=low + + * Build depends on libglade-gnome0-dev (>= 0.16-1) (Closes: #90416) + * debian/control Add Build-Conflicts: libgtkhtml-dev (>= 0.7-1) (Closes: #90700) + + -- Christian Marillat Thu, 22 Mar 2001 16:44:12 +0100 + +gnome-core (1.4.0-1) unstable; urgency=low + + * New upstream release. + * Gnome-core replaces gnome-control-center 1.2.3-1 (Closes: #90124) + * Remove manpages patche included by upstream. + * gnome-session don't always saves session on logout (Closes: #89630) + * Can add a launcher in the panel (Closes: #90018) + * Deskguide don't crashes on Fill with mini-images (Closes: #86952) + * Deskguide don't fail to run (Closes: #89769) + * Pager applet don't fail to run (Closes: #89025) + + -- Christian Marillat Mon, 19 Mar 2001 13:01:26 +0100 + +gnome-core (1.3.1-2) unstable; urgency=low + + * Remove taslisk-applet manpage (Closes: #88994) + * New patch against gnome-terminal.1 (Closes: #89005) + * Move /usr/lib/libtasklist_applet.so in libpanel-applet0 + (Closes: #89053, #89008, #89012, #89091, #89003) + * Gnome-terminal replace gnome-help-data (<= 1.0.55-2) (Closes: #87910) + + -- Christian Marillat Sat, 10 Mar 2001 10:45:14 +0100 + +gnome-core (1.3.1-1) unstable; urgency=low + + * New upstream release. + * Removed default.session patch + * debian/control Add Replaces: gnome-control-center (<= 1.2.2-10), because + the session-properties-capplet is now in this package. + * debian/{postinst,prerm} Call scrollkeeper + * debian/control Add scrollkeeper, xml-i18n-tools and libglade-gnome0-dev in + build-depends and scrollkeeper in depends for gnome-core + * Menu and laucnh keys works now (Closes: #86955) + * Dead keys work in gnome-terminal (Closes: #63102) + * Gnome-terminal isn't broken (Closes: #86752) + * New patch htmlurl.h (This file was broken by upstream author) + * XFMail doesn't crash the tasklist applet in this release (Closes: #88515) + * debian/gnome-core.menu New file for the session properties capplet + + -- Christian Marillat Mon, 5 Mar 2001 11:40:15 +0100 + +gnome-core (1.2.4-11) unstable; urgency=low + + * Update (again) the Build-depends field (Closes: #87419) + * Add a debian directory for the gnome-help-browser and add suggest doc-base + for gnome-help. Now we can watch debian documentation registered with doc-base. + * Add a lintian override file for libpanel-applet0 + + -- Christian Marillat Sun, 25 Feb 2001 16:14:09 +0100 + +gnome-core (1.2.4-10) unstable; urgency=low + + * Update the Build-depends field (Closes: #86441, #87419) + * Call update-alternatives only in remove (gnome-terminal, gnome-session) (Closes: #87327, #87328) + + -- Christian Marillat Sat, 24 Feb 2001 18:03:20 +0100 + +gnome-core (1.2.4-9) unstable; urgency=low + + * Remove abandonned /etc/CORBA/servers/bad-applet.goad (Closes: #84950) + * Build against the latest gnome-libs (1.2.11) (Close: #85932) + + -- Christian Marillat Wed, 14 Feb 2001 13:49:26 +0100 + +gnome-core (1.2.4-8) unstable; urgency=low + + * debian/control Add Replaces: gnome-help-data (<< 1.0.55-2) for + gnome-help (Closes: #80974) + * debian/gnome-help.mime Rewrote (Closes: #82891) + * debian/control gnome-core depends on gnome-bin (Closes: #82951) + * Wrote gnome-panel.README.Debian (Closes: #82954) + + -- Christian Marillat Mon, 22 Jan 2001 16:04:58 +0100 + +gnome-core (1.2.4-7) unstable; urgency=low + + * Added gnome-bin (>= 1.2.0) in gnome-session Depends field (Closes: #80589, #80595, #80733) + + -- Christian Marillat Wed, 27 Dec 2000 19:24:08 +0100 + +gnome-core (1.2.4-6) unstable; urgency=low + + * Apply patch to gnome-run to call x-terminal-emulator (Closes: #80219) + * debian/gnome-terminal.wrapper This is -t not -T close (Closes: #80405) + + -- Christian Marillat Sun, 24 Dec 2000 03:27:12 +0100 + +gnome-core (1.2.4-5) unstable; urgency=low + + * Install gnome-terminal.wrapper as x-terminal-emulator and remove + debian/patches/gnome-terminal.dpatch (Closes: 64326) + Thanks to Eric Gillespie, Jr. + * Add Recommends: gnome-applets on gnome-panel (Closes: #72208) + * gnome-sesion provides x-session-manager and install alternative (Closes: #60667) + * Added hints=Gnome for all menu files. + + -- Christian Marillat Wed, 20 Dec 2000 23:19:55 +0100 + +gnome-core (1.2.4-4) unstable; urgency=low + + * Call x-terminal-emulator in gnome-wm and add depends on the latest debianutils + for gnome-session. Thanks to Joseph Carter for the file + (Closes: #79776) + * Rewrote default.session patch + * Add patch form Doug Larrick for gwmthumbnail.c (Closes: #78550) + + -- Christian Marillat Sun, 17 Dec 2000 12:04:54 +0100 + +gnome-core (1.2.4-3) unstable; urgency=low + + * Change gnome-help.mime to call the right file (Closes: #77986) + Thanks Malcolm Parsons for the patch. + * Patch gsm/default.in (two entries with same id) (Closes: #78276) + Thanks to Normal User (Nice name) + * Move gnome-control-center from Depends to Suggests. + * Remove libgtkhtml-dev from Build-Depends (Closes: #79527) + + -- Christian Marillat Wed, 13 Dec 2000 18:01:34 +0100 + +gnome-core (1.2.4-2) unstable; urgency=low + + * Remove README and NEWS files (Closes: #77250) + * Disable thumbnails by default in deskguide_applet (Closes: #77205) + * debian/rules --with-window-manager is now sawfish (was x-window-manager) + and rewrote debian/patches/gnome-wm.dpatch to remove x-window-manager (Closes: #77401) + * Should close this old bug (Closes: #51198) + * Patch gnome-edit to use x-terminal-emulator instead of xterm. + + -- Christian Marillat Mon, 20 Nov 2000 11:35:55 +0100 + +gnome-core (1.2.4-1) unstable; urgency=low + + * New upstream release. + + -- Christian Marillat Thu, 16 Nov 2000 00:43:15 +0100 + +gnome-core (1.2.3.1-1) unstable; urgency=low + + * New upstream release. + * Add gnome-help example and manpage in gnome-help package (Closes: #49977) + * This release should close these old bugs (Closes: #60561, #60768, #45053) + * Gnome-panel don't use all CPU time (Closes: #75251, #60209) + * Remove gmenu patch included by upstream. + + -- Christian Marillat Wed, 8 Nov 2000 17:09:42 +0100 + +gnome-core (1.2.3-1) unstable; urgency=low + + * New upstream release. + * Debian menus aren't empty (Closes: #70470) + * Launcher can find icon (Closes: #62502) + + -- Christian Marillat Tue, 24 Oct 2000 15:51:11 +0200 + +gnome-core (1.2.2.1-3) unstable; urgency=low + + * Add gnome-terminal.prerm for update-alternatives --remove (Closes: #74451) + * Patch gnome-terminal to accept -T option (Closes: #74450) + * Move README.debian in gnome-session package (Closes: #60440) + * mesg work in gnome-terminal (Closes: #71728) + * Upstream fix these old bugs in Gnome-terminal + Problem with menubar (Closes: #57516) + Problem with console-apt Closes: #60079) + Problem with screen (Closes: #50156) + * Binaries don't should go in /usr/X11R6/bin (Closes: #24031) + Quoting Debian policy : + "Packages using the X Window System should abide by the FHS standard" + "whenever possible; they should install binaries, libraries, manual" + "pages, and other files in FHS-mandated locations wherever possible." + "This means that files must not be installed into /usr/X11R6/bin/'" + * hostname isn't harcoded (Closes: #72536) + * Error messages mention Lynx (Closes: #62216) + * Display correctly deskuse.html (Closes: #49974) + * Add patch from malcolm (Closes: #64820) + + -- Christian Marillat Sat, 14 Oct 2000 23:39:49 +0200 + +gnome-core (1.2.2.1-2) unstable; urgency=low + + * Typo in debian/gnome-terminal.postinst + * Add gnome-terminal manpage (Closes: #69188) + * Closes: #63103 already closed in 1.2.1-0.2 (typo in debian/changelog) + * Gnome-terminal write to /var/run/utmp (Closes: #59053) + * delete/backspace keys works (Closes: #57198) + * Install GnomeHelp file in /etc/gnome/config (Closes: #73012) + * Convert png icons in xpm for Debian menu. + * Rearange documentation for dhelp (Closes: #56672) + + -- Christian Marillat Thu, 5 Oct 2000 00:59:44 +0200 + +gnome-core (1.2.2.1-1) unstable; urgency=low + + * New upstream release. + * Patch all manpages (Closes: #70009) + * gnome-panel 1.0.55-2.0.1 (sparc) is now installable (Closes: #69075, #71570) + * gmenu don't jam up all translations (Closes: #46446) + * panel remember its configuration between session + (Closes: #47734, #54190) + * Icons are now centered (Closes: #63868) + * Bugs closed by previous NMU in gnome-panel (Closes: #40036, #52584, #54755, + #58278, #61083, #69428)) + * libgen_util_applet.so installed in 1.2.1-0.2 (Closes: #69463) + * debian/control remove Conflicts: asclock (Closes: #52077) + * gnome-help 1.0.55-2.0.1 (sparc) is now installable (Closes: #69356) + * Bugs closed by previous NMU in gnome-help (Closes: #49734, #56081, #58679, #58973) + * debian/control move gmc from Recommends to Suggests (Closes: #59415) + * The first search in gnome-wm search is x-window-manager + (Closes: #50940, #65969, #62143) + * Bug closed in 1.2.2-1 (README.debian in gnome-session package) (Closes: #66219) + * Bugs closed by previous NMU in gnome-terminal + (Closes: #64579, #63592, #63332, #56584, #55477, #54428) + * gnome-terminal provide x-terminal-emulator (Closes: #61805, #53994, #56225) + + -- Christian Marillat Wed, 27 Sep 2000 16:02:16 +0200 + +gnome-core (1.2.2-1) unstable; urgency=low + + * New maintainer, thanks James. + * New upstream release. + * Switch to debhelper V2 + * Move README.debian in gnome-session package (Closes: #65235) and + update this file (Closes: #71339) + * Bug closed in 1.2.1-0.2 (Install missing libraries) (Closes: #69590, #70483) + * Bugs closed in 1.2.1-0.1 (typo close instead closes) (Closes: #53764, #54050) + * Remove gtkhtml patch. + * The desk guide show thumbnail (Closes: #72359) + * Missing package under sparc (Closes: #71438) + * debian/control add Conflicts: libgnome32 (<< 1.2.0-1) for gnome-panel (Closes: #72039) + * Added icons in Debian menu. + * Eject in drivemount check if '-u' is available (Closes: #63954) + * Patch gmenu to find Debian menu. + + -- Christian Marillat Tue, 26 Sep 2000 17:34:23 +0200 + +gnome-core (1.2.1-0.2) unstable; urgency=low + + * NMU. + * Install these libraries libfish_applet.so libgen_util_applet.so + libpanel_status.so (Closes: #69428, #69590) + * Copy latest gnome aclocal in macros/ and run macros/autogen.sh + This is needed to build gnome-help-browser against libgtkhtml4. + * In debian/control + gnome-session depends on gnome-panel (>= ${Source-Version}). + gnome-help depends on gnome-core (>= 1.2.0-0.1) no Source-Version. + gnome-terminal don't depends on gnome-core. + * URL's are clickable in gnome-terminal (Closes: 63103). + * debian/gnome-panel.undocumented removed printer_applet.1 + * Cut and paste work in gnome-terminal (Closes: #63592). + + -- Christian Marillat Wed, 23 Aug 2000 21:23:36 +0200 + +gnome-core (1.2.1-0.1) unstable; urgency=low + + * New upstream release (Closes: #58806, #66467) + * NMU. + * Standards-Version to 3.1.1.1 Added Build-depends field. + * Removed patches: dialer, drivemount-floppy, modemlights, term, + help-browser, debian-menu, url-match. + * Added patches: gtkhtml. + * Build against libgtkhtml3. Closes: #58679, #36806, #49734 + * Default manpath and infopath are wrong. Closes: #56081 + * gmenu segfaults. Close: #53764, #54050 + * gnome-panel: panel no longer works. Closes: #58278 + * gnome-panel: gnomepager-applet should put braces around. Closes: #52584 + * Backspace and delete work correctly. Closes: #54428 + * TERM never select xterm-debian. Closes: #56584, #55477, #64579 + * Disable arrows option is now saved. Closes: #54755 + * No more files in /usr/share. Closes: #61083 + * Show debian menus. Closes #66214 + * New help documentation for panel. Closes: #40036 + * Gnome-terminal write to /var/run/utmp. Closes #59053 + * gnome-terminal provide x-terminal-emulator. Closes #61805, #56225 + * README.Debian is here. Closes: #65235 + + -- Christian Marillat Tue, 25 Jul 2000 19:09:21 +0200 + +gnome-core (1.0.55-2) frozen unstable; urgency=low + + * Make x-window-manager run first by gnome-wm script to conform to + debian policy (Closes: #61617) (This is an important bug) + + -- James LewisMoss Sun, 21 May 2000 19:31:19 -0400 + +gnome-core (1.0.55-1) unstable; urgency=low + + * New upstream. + + -- James LewisMoss Sun, 2 Jan 2000 07:32:36 -0500 + +gnome-core (1.0.54-2) unstable; urgency=low + + * Fix the gnome-pager forgets size settings bug (was saved to wrong + section). Closes: #49839, #46845. + + -- James LewisMoss Fri, 12 Nov 1999 07:54:46 -0500 + +gnome-core (1.0.54-1) unstable; urgency=low + + * New upstream. + + -- James LewisMoss Thu, 4 Nov 1999 23:20:14 -0500 + +gnome-core (1.0.53-4) unstable; urgency=low + + * New maintainer. + + -- James LewisMoss Mon, 25 Oct 1999 23:17:31 -0400 + +gnome-core (1.0.53-3) unstable; urgency=low + + * Ok, I made a mistake by setgiding gnome-terminal to + utmp. Reverted the change. Closes: #47960 + + -- Raphael Hertzog Mon, 18 Oct 1999 19:17:27 +0200 + +gnome-core (1.0.53-2) unstable; urgency=low + + * gnome-session does launch a default window-manager. It does launch + gnome-wm if no other information has been found. gnome-wm now + reads the list of window managers from /etc/X11/window-managers + once it has tried gnome compliant wm. Closes: #38347, #47370 + * Patched gnome-terminal. TERM=xterm-debian again ... actually this + closes: #47552, #44960, #41065 + * gnome-terminal is now setgid utmp and can thus register itself + in the UTMP database. Closes: #40507 + * The URL match does now accept % characters. Closes: #47281 + * libpanel-applet0.postinst check for the changelog.gz mysteriously + staying around. Closes: #45871 + * Unreproducable bugs without answer from the submitter. + Closes: #41195, #42865 + + -- Raphael Hertzog Sat, 16 Oct 1999 19:52:38 +0200 + +gnome-core (1.0.53-1) unstable; urgency=low + + * New upstream version. + * gnome-session does now depend on gnome-panel and recommends + gmc (both are needed for a full Gnome desktop). + * gnome-terminal does not have a border. Closes: #38972 + + -- Raphael Hertzog Tue, 12 Oct 1999 21:17:58 +0200 + +gnome-core (1.0.52-1) unstable; urgency=low + + * New maintainer. Steve said that he wanted to give away some of + his packages. I've asked to take gnome-core, he never replied, so + I'm taking it but I will give it back to him if he wanted to + keep it. In the meantime I can better manage bugs with my name + in the Maintainer field. + * New upstream version. + + -- Raphael Hertzog Mon, 4 Oct 1999 21:28:18 +0200 + +gnome-core (1.0.50-0.1) unstable; urgency=low + + * New upstream version. + * NMU again. + + -- Raphael Hertzog Thu, 30 Sep 1999 22:10:03 +0200 + +gnome-core (1.0.41-0.1) unstable; urgency=low + + * New upstream version. + * NMU again. + + -- Raphael Hertzog Mon, 27 Sep 1999 13:10:31 +0200 + +gnome-core (1.0.9-0.1) unstable; urgency=low + + * New upstream version. Closes: #43253, #44098 + * Apply patches before configuring (and relaunch automake && autoconf + because one of the patches is applied on Makefile.am). + * NMU. Thanks to Christian Marillat for his work. + * Imlib bug corrected: closes: #39085 + * X11 binaries don't have to go /usr/X11R6/bin. Closes: #24031 + * The panel does start correctly wihout complaining about a + missing name service. Closes: #39380, #39634, #40478 + * The panel doesn't consume all CPU resources. Closes: #30654 + * The panel launches apps from where it has been launched itself. + Closes: #32319 + * The panel keeps the settings. Closes: #37052, #40579, #43496 + * Old core dump corrected upstream. Closes: #39400, #40328, #42167 + Closes: #44344, #44724, #44732, #44759, #44773 + * Bug in menu-method, not in gnome-panel. Already reported against + menu. Closes: #40089 + * cdplayer_applet works again. Closes: #42192 + * gnome pager works well: Closes: #42499, #42610 + * modem_lights draws itself correctly. Closes: #43861, #45055 + * The dialer applets doesn't exit when stopping while + not yet connected. Closes: #45287 + * No more Debian menu in the panel. Closes: #41040 + * GnomeICU works with this panel. Closes: #39626, #39515 + * gnome-panel-data conflicts with asclock. + Closes: #40712, #40715, #40808, #41430 + A better solution will be needed. Maybe put asclock in his own + package or create a asclock-data package that will be shared. + * Updated the modemlights patch. Closes: #43512 + * Added a patch for gnome-wm. Closes: #38366 + * Move lib{gkb,fish}_applet.so files to libgnome-applet0 (those are + not libraries to be linked with, just simple modules). Closes: #38596 + * Asclock works well without xearth (the code still mentions xearth + however). Closes: #40530 + * New patch (help-browser) for changing the default MANPATH and INFOPATH in + gnome-help-browser.c Closes: #41452 + * Moved help-browser to the new "Help" menu section. + * Added gnome-help.mime. Closes: #42205 + * Gnome-session does launch gnome-panel ! (I suppose that it failed + to launch since panel was broken). Closes: #42937 + * gnome-sesion doesn't core dump. Closes: #36640 + * The terminal does remember the TERM var. Closes: #43067 + * The terminal keeps its size when dragging the manu bar in and out. + Closes: #44762 + * The menu section of gnome-terminal corrected. Closes: #37635 + + -- Raphael Hertzog Wed, 22 Sep 1999 13:24:34 +0200 + +gnome-core (1.0.7-1) unstable; urgency=low + + * New upstream version. + * Removed "term" patch + + -- Steve Haslam Mon, 28 Jun 1999 01:36:31 +0100 + +gnome-core (1.0.6-2) unstable; urgency=low + + * debian-menu.dpatch: created to fix guessing Debian menus + (/etc/menu-methods/gnome-panel now) and to make Debian menus the default + instead of GNOME system menus. + * gnome-help now suggests gnome-users-guide-en (closes: #35724) + * /etc/menu-methods/gnome-panel now creates .directory files and searches + /usr/X11R6/include/X11/pixmaps for menu icons + + -- Steve Haslam Sun, 13 Jun 1999 15:28:52 +0100 + +gnome-core (1.0.6-1) unstable; urgency=low + + * New upstream version. + + -- Steve Haslam Sat, 5 Jun 1999 12:57:08 +0100 + +gnome-core (1.0.5-3) unstable; urgency=low + + * debian/gnome-terminal.menu: managed to lose change mentioned in last + revision. Replaced. + * debian/gnome-core.undocumented: removed gnome-wm.1 (it was in + gnome-session.undocumented too). + + -- Steve Haslam Mon, 31 May 1999 19:15:54 +0100 + +gnome-core (1.0.5-2) unstable; urgency=low + + * debian/gnome-terminal.menu: changed section to XShells (Bug#37635) + * debian/rules: added gnome-wm and gnome-edit to dh_undocumented call + (Bug#37632) + * debian/gnome.menu-method: added patch to honour needs=text (Bug#36928) + from Decklin Foster + * Call dh_strip when making libpanel-applet-dev (Closes Bug#31244) + * Removed /usr/share/gnome/apps/Debian symlink, (closes #38100) + * Sanified build system a la gnome-libs + * debian/control: made gnome-help, gnome-help-data and gnome-panel-data + packages. + + -- Steve Haslam Sun, 23 May 1999 14:35:44 +0100 + +gnome-core (1.0.5-1) unstable; urgency=low + + * New maintainer. + + -- Steve Haslam Tue, 11 May 1999 01:01:12 +0100 + +gnome-core (1.0.5-0.2) unstable; urgency=low + + * gnome-panel.files.in: added asclock themes, libgkb_applet.a + * gnome-core.files.in: added gnome-wm, gnome-edit + * term.dpatch: gnome-terminal TERM to xterm-debian rather than xterm + * gsm/Makefile.am: put default.session, default.wm in /etc/gnome + * debian/gnome-session.conffiles.in: added above two files + * debian/gnome-session.files.in: updated this too + + -- Steve Haslam Sun, 18 Apr 1999 16:47:23 +0100 + +gnome-core (1.0.5-0.1) unstable; urgency=low + + * Non-maintainer upload + * New upstream version + + -- Steve Haslam Thu, 15 Apr 1999 23:22:23 +0100 + +gnome-core (1.0.1-0.3) unstable; urgency=low + + * Weehay! More broken dependencies. This one libghttp -1.1, + a bogus package that only ever existed on my machine. + + -- Jules Bean Mon, 8 Mar 1999 08:24:00 +0000 + +gnome-core (1.0.1-0.2) unstable; urgency=low + + * Another NMU, this time to fix bogus dependencies on libgtop0 + and libglib1.1 + + -- Jules Bean Sun, 7 Mar 1999 14:21:12 +0000 + +gnome-core (1.0.1-0.1) unstable; urgency=low + + * NMU for GNOME-1.0 + * Hacked to patch SIGPIPE bug + * Don't delete GIFs in rules + + -- Jules Bean Fri, 5 Mar 1999 18:36:29 +0100 + +gnome-core (0.99.99pre1.0.0-1) unstable; urgency=low + + * New upstream release. + + -- Jim Pick Fri, 26 Feb 1999 23:18:10 -0800 + +gnome-core (0.99.3.2-4) unstable; urgency=low + + * Recompiled yet again - dual dependency on libglib. + Fixes: BUG#32510 + + -- Jim Pick Thu, 28 Jan 1999 00:00:22 -0800 + +gnome-core (0.99.3.2-3) unstable; urgency=low + + * Recompiled again to due to dependencies. + + -- Jim Pick Sun, 24 Jan 1999 01:10:07 -0800 + +gnome-core (0.99.3.2-2) unstable; urgency=low + + * Recompiled with libgnome 0.99.4. + + -- Jim Pick Fri, 22 Jan 1999 16:44:45 -0800 + +gnome-core (0.99.3.2-1) unstable; urgency=low + + * New upstream release. + + -- Jim Pick Wed, 20 Jan 1999 11:42:46 -0800 + +gnome-core (0.30-2) frozen unstable; urgency=low + + * Recompiled with new libs. + * Fixed reference to /usr/X11R6 in README.Debian. + * Added warnings (Gnome is ALPHA). + * Patched dialer_applet to use pon/poff. + * Patched drivemount_applet to default to /floppy. + + -- Jim Pick Tue, 24 Nov 1998 10:56:08 -0800 + +gnome-core (0.30-1) unstable; urgency=low + + * New upstream release. + + -- Jim Pick Thu, 24 Sep 1998 21:28:02 -0700 + +gnome-core (0.28.1-1) unstable; urgency=low + + * New upstream release. + * Hopefully fixes panel applet bug. + + -- Jim Pick Wed, 19 Aug 1998 20:12:25 -0700 + +gnome-core (0.28-1) unstable; urgency=low + + * New upstream release. + + -- Jim Pick Mon, 17 Aug 1998 12:59:26 -0700 + +gnome-core (0.27-1) unstable; urgency=low + + * New upstream release. + * Added /usr/doc/gnome + + -- Jim Pick Sat, 15 Aug 1998 14:21:06 -0700 + +gnome-core (0.25-1) unstable; urgency=low + + * New upstream release. + + -- Jim Pick Thu, 6 Aug 1998 22:51:22 -0700 + +gnome-core (0.20-2) unstable; urgency=low + + * Added Debian menu-method for gnome-panel. Fixed Bug #24025 + (Thanks to Ray Dassen for reporting the bug, and Riku Voipio + who wrote the menu method for Gnome 0.12) + + -- Jim Pick Wed, 22 Jul 1998 20:22:00 -0700 + +gnome-core (0.20-1) unstable; urgency=low + + * New upstream release. + + -- Jim Pick Mon, 8 Jun 1998 12:00:08 -0700 + +gnome-core (0.13-1) unstable; urgency=low + + * Initial Release. + + -- Jim Pick Mon, 16 Mar 1998 15:27:43 -0800 --- gnome-session-2.25.90.orig/debian/dirs +++ gnome-session-2.25.90/debian/dirs @@ -0,0 +1 @@ +/usr/share/images/desktop-base --- gnome-session-2.25.90.orig/debian/README.Debian +++ gnome-session-2.25.90/debian/README.Debian @@ -0,0 +1,70 @@ +gnome-session for DEBIAN +-------------------------- + +Splash screen +------------- + +Displaying a splash screen implies a noticeable delay in login for most users, +hence it's disabled by default. You can enable the default splash screen by +setting the splash_image GConf key to a relative path below /usr/share/pixmaps, +the default splash of the gnome-session package is +splash/gnome-debian-splash.png: + gconftool-2 -s /apps/gnome-session/options/splash_image \ + --type string splash/gnome-debian-splash.png + +Some theme packages might provide other splash pixmaps, notably desktop-base. + + +Using startx/xinit +------------------ + +To use the gnome-session manager with startx or xinit, you need to edit your +.xinitrc file. + +The previous maintainers' .xinitrc file looked something like this: + +---------------------------------------------------------------------- +# This calls our default window-manager +/usr/bin/x-window-manager& +# You can replace the line above by seting a WINDOW_MANAGER environment +# variable to set your preferred WM. +export WINDOW_MANAGER=sawfish +# This starts up GNOME +exec /usr/bin/gnome-session +---------------------------------------------------------------------- + +Note: If you don't have gnome-session set up at the end of your + .xinitrc where it does the "exec" (perhaps your window manager + is there) - you won't be able to use the session manager to + handle the logging out process (where it will save the state + of all your apps). + +Jim Pick , & James LewisMoss , + Mon, 16 Mar 1998 15:27:43 -0800 + + +Splash Screen +------------- + +Debian's gnome-session uses a Debian-related splash screen instead of +the original GNOME splash screen by default. You can change the the +splash screen that should be used using the following gconf key: + + /apps/gnome-session/options/splash_image + +This means that you can set your personal splash screen by using +gconf-editor to edit the value of that key or you can issue the following +command: + +$ gconftool-2 --type string --set /apps/gnome-session/options/splash_image \ +/usr/share/pixmaps/splash/gnome-splash.png + +The last argument is GNOME's default splash screen. You can choose any +image, of course. To set the system wide default do: + +# gconftool-2 --direct \ +--config-source xml:readwrite:/etc/gconf/gconf.xml.defaults \ +--type string --set /apps/gnome-session/options/splash_image \ +/usr/share/pixmaps/splash/gnome-splash.png + +Gustavo Noronha Silva , Sat, 19 Jun 2004 20:51:32 -0300 --- gnome-session-2.25.90.orig/debian/control.in +++ gnome-session-2.25.90/debian/control.in @@ -0,0 +1,55 @@ +Source: gnome-session +Section: gnome +Priority: optional +Maintainer: Ubuntu Desktop Team +XSBC-Original-Maintainer: Josselin Mouette +Uploaders: @GNOME_TEAM@ +Standards-Version: 3.7.3 +Build-Depends: cdbs (>= 0.4.41), + quilt, + liborbit2-dev (>= 2.10.2-1.1), + intltool (>= 0.35.0), + libgconf2-dev (>= 2.10.1-6), + libglade2-dev (>= 2.3.6), + libgnomecanvas2-dev (>= 2.10), + libgnomevfs2-dev (>= 2.10), + libstartup-notification0-dev, + gnome-pkg-tools (>= 0.10), + debhelper (>= 5.0.13), + libx11-dev, + libxt-dev, + libice-dev, + libsm-dev, + libxrender-dev, + libxrandr-dev, + libxmu-dev, + libxau-dev, + xtrans-dev, + libgnome-desktop-dev, + sharutils, + libdbus-glib-1-dev (>= 0.76), + libpolkit-gnome-dev (>= 0.7), + libglib2.0-dev (>= 2.16), + libgtk2.0-dev (>= 2.11.1), + libxtst-dev + +Package: gnome-session +Architecture: any +Depends: ${shlibs:Depends}, + ${misc:Depends}, + dbus-x11 (>= 1.2.1-2ubuntu9), + gnome-control-center (>= 1:2.22), + gnome-settings-daemon +Recommends: gnome-panel, + nautilus, + metacity | sawfish +Breaks: gnome-panel (<< 1:2.23) +Conflicts: bug-buddy (<< 2.20) +Provides: x-session-manager +Suggests: gnome-user-guide | gnome2-user-guide, + desktop-base +Description: The GNOME 2 Session Manager + This package contains an X11-compliant "session manager" (similar to xsm) + with GNOME extensions. When you log out, the session manager will save the + state of all your GNOME 2 apps. When you log back in, the session manager + will restore your session. --- gnome-session-2.25.90.orig/debian/compat +++ gnome-session-2.25.90/debian/compat @@ -0,0 +1 @@ +5 --- gnome-session-2.25.90.orig/debian/prerm +++ gnome-session-2.25.90/debian/prerm @@ -0,0 +1,13 @@ +#!/bin/sh + +set -e + +if [ "$1" = "remove" ] || [ "$1" = upgrade ]; then + update-alternatives --remove x-session-manager /usr/bin/gnome-session + update-alternatives --remove desktop-splash \ + /usr/share/pixmaps/splash/gnome-splash.png + update-alternatives --remove desktop-splash \ + /usr/share/pixmaps/splash/gnome-debian-splash.png +fi + +#DEBHELPER# --- gnome-session-2.25.90.orig/debian/gconf-defaults +++ gnome-session-2.25.90/debian/gconf-defaults @@ -0,0 +1 @@ +/apps/gnome-session/options/show_splash_screen false --- gnome-session-2.25.90.orig/debian/patches/81_gnome_wm_install.patch +++ gnome-session-2.25.90/debian/patches/81_gnome_wm_install.patch @@ -0,0 +1,29 @@ +Index: gnome-session-2.25.3/data/Makefile.am +=================================================================== +--- gnome-session-2.25.3.orig/data/Makefile.am 2009-01-15 19:27:11.000000000 +0000 ++++ gnome-session-2.25.3/data/Makefile.am 2009-01-15 20:51:13.000000000 +0000 +@@ -24,6 +24,10 @@ + + bin_SCRIPTS = gnome-wm + ++appsdir = $(datadir)/applications ++apps_in_files = gnome-wm.desktop.in ++apps_DATA = $(apps_in_files:.desktop.in=.desktop) ++ + settingsdir = $(datadir)/applications + settings_in_files = session-properties.desktop.in + settings_DATA = $(settings_in_files:.desktop.in=.desktop) +@@ -41,6 +45,7 @@ + gnome-wm \ + $(xsession_in_files) \ + $(schemas_in_files) \ ++ $(apps_in_files) \ + $(glade_DATA) \ + $(pixmap_DATA) + +@@ -50,4 +55,5 @@ + $(settings_DATA) + + DISTCLEANFILES = \ ++ $(apps_DATA) \ + $(settings_in_files) --- gnome-session-2.25.90.orig/debian/patches/series +++ gnome-session-2.25.90/debian/patches/series @@ -0,0 +1,4 @@ +19_gnome-wm-tweaking.patch +80_new_upstream_session_dialog.patch +81_gnome_wm_install.patch +98_autotools.patch --- gnome-session-2.25.90.orig/debian/patches/80_new_upstream_session_dialog.patch +++ gnome-session-2.25.90/debian/patches/80_new_upstream_session_dialog.patch @@ -0,0 +1,891 @@ +Index: gnome-session-2.24.0/gnome-session/gsm-manager.c +=================================================================== +--- gnome-session-2.24.0.orig/gnome-session/gsm-manager.c 2008-09-22 23:21:08.000000000 +0200 ++++ gnome-session-2.24.0/gnome-session/gsm-manager.c 2008-09-23 10:01:48.000000000 +0200 +@@ -2180,7 +2180,8 @@ + { + g_debug ("GsmManager: Logout dialog response: %d", response_id); + +- gtk_widget_destroy (GTK_WIDGET (logout_dialog)); ++ if (response_id != GTK_RESPONSE_HELP) ++ gtk_widget_destroy (GTK_WIDGET (logout_dialog)); + + /* In case of dialog cancel, switch user, hibernate and + * suspend, we just perform the respective action and return, +@@ -2190,6 +2191,10 @@ + case GTK_RESPONSE_NONE: + case GTK_RESPONSE_DELETE_EVENT: + break; ++ case GTK_RESPONSE_HELP: ++ gsm_util_help_display (GTK_WINDOW (logout_dialog), ++ "gosgetstarted-73"); ++ break; + case GSM_LOGOUT_RESPONSE_SWITCH_USER: + request_switch_user (manager); + break; +Index: gnome-session-2.24.0/gnome-session/gsm-util.c +=================================================================== +--- gnome-session-2.24.0.orig/gnome-session/gsm-util.c 2008-09-22 23:21:08.000000000 +0200 ++++ gnome-session-2.24.0/gnome-session/gsm-util.c 2008-09-23 10:01:48.000000000 +0200 +@@ -21,6 +21,7 @@ + #include + #include + #include ++#include + #include + #include + #include +@@ -288,3 +289,75 @@ + g_error_free (bus_error); + } + } ++ ++void ++gsm_util_help_display (GtkWindow *parent, ++ const char *link_id) ++{ ++ GError *error = NULL; ++ char *command; ++ const char *lang; ++ char *uri = NULL; ++ GdkScreen *gscreen; ++ gboolean found; ++ ++ int i; ++ ++ const char * const * langs = g_get_language_names (); ++ ++ uri = NULL; ++ found = FALSE; ++ ++ for (i = 0; langs[i]; i++) { ++ lang = langs[i]; ++ if (strchr (lang, '.')) { ++ continue; ++ } ++ ++ uri = g_build_filename (DATADIR, ++ "/gnome/help/user-guide/", ++ lang, ++ "/user-guide.xml", ++ NULL); ++ ++ if (g_file_test (uri, G_FILE_TEST_EXISTS)) { ++ found = TRUE; ++ break; ++ } ++ } ++ ++ if (found) { ++ if (link_id) { ++ command = g_strconcat ("gnome-open ghelp://", uri, "?", link_id, NULL); ++ } else { ++ command = g_strconcat ("gnome-open ghelp://", uri, NULL); ++ } ++ ++ gscreen = gdk_screen_get_default (); ++ gdk_spawn_command_line_on_screen (gscreen, command, &error); ++ } else ++ command = NULL; ++ ++ if (!found || error != NULL) { ++ GtkWidget *d; ++ const char *errmsg; ++ ++ if (!found) ++ errmsg = _("Cannot find help."); ++ else { ++ errmsg = error->message; ++ g_error_free (error); ++ } ++ ++ d = gtk_message_dialog_new (parent, ++ GTK_DIALOG_MODAL|GTK_DIALOG_DESTROY_WITH_PARENT, ++ GTK_MESSAGE_ERROR, GTK_BUTTONS_OK, ++ "%s", errmsg); ++ gtk_widget_show (GTK_WIDGET (d)); ++ g_signal_connect (d, "response", ++ G_CALLBACK (gtk_widget_destroy), NULL); ++ } ++ ++ g_free (command); ++ g_free (uri); ++} +Index: gnome-session-2.24.0/gnome-session/gsm-util.h +=================================================================== +--- gnome-session-2.24.0.orig/gnome-session/gsm-util.h 2008-09-22 23:21:08.000000000 +0200 ++++ gnome-session-2.24.0/gnome-session/gsm-util.h 2008-09-23 10:01:48.000000000 +0200 +@@ -21,6 +21,7 @@ + #define __GSM_UTIL_H__ + + #include ++#include + + G_BEGIN_DECLS + +@@ -37,6 +38,9 @@ + void gsm_util_setenv (const char *variable, + const char *value); + ++void gsm_util_help_display (GtkWindow *parent, ++ const char * link_id); ++ + G_END_DECLS + + #endif /* __GSM_UTIL_H__ */ +Index: gnome-session-2.24.0/gnome-session/Makefile.am +=================================================================== +--- gnome-session-2.24.0.orig/gnome-session/Makefile.am 2008-09-22 23:21:08.000000000 +0200 ++++ gnome-session-2.24.0/gnome-session/Makefile.am 2008-09-23 10:01:48.000000000 +0200 +@@ -7,6 +7,7 @@ + noinst_PROGRAMS = \ + test-client-dbus \ + test-inhibit \ ++ test-logout \ + $(NULL) + + INCLUDES = \ +@@ -21,6 +22,7 @@ + -DDATA_DIR=\""$(datadir)/gnome-session"\" \ + -DDBUS_LAUNCH=\"dbus-launch\" \ + -DLIBEXECDIR=\"$(libexecdir)\" \ ++ -DDATADIR=\""$(datadir)"\" \ + -DGLADEDIR=\""$(pkgdatadir)"\" \ + -DGCONF_SANITY_CHECK=\""$(GCONF_SANITY_CHECK)"\" \ + -DGCONFTOOL_CMD=\"$(GCONFTOOL)\" +@@ -42,6 +44,24 @@ + $(DBUS_GLIB_LIBS) \ + $(NULL) + ++test_logout_SOURCES = \ ++ test-logout.c \ ++ gdm.c \ ++ gdm.h \ ++ gsm-consolekit.c \ ++ gsm-consolekit.h \ ++ gsm-logout-dialog.c \ ++ gsm-logout-dialog.h \ ++ gsm-power-manager.c \ ++ gsm-power-manager.h \ ++ $(NULL) ++ ++test_logout_LDADD = \ ++ $(GNOME_SESSION_LIBS) \ ++ $(DBUS_GLIB_LIBS) \ ++ $(POLKIT_GNOME_LIBS) \ ++ $(NULL) ++ + gnome_session_LDADD = \ + -lSM -lICE \ + libgsmutil.la \ +Index: gnome-session-2.24.0/gnome-session/Makefile.in +=================================================================== +--- gnome-session-2.24.0.orig/gnome-session/Makefile.in 2008-09-22 23:30:18.000000000 +0200 ++++ gnome-session-2.24.0/gnome-session/Makefile.in 2008-09-23 10:01:48.000000000 +0200 +@@ -310,6 +310,7 @@ + -DDATA_DIR=\""$(datadir)/gnome-session"\" \ + -DDBUS_LAUNCH=\"dbus-launch\" \ + -DLIBEXECDIR=\"$(libexecdir)\" \ ++ -DDATADIR=\""$(datadir)"\" \ + -DGLADEDIR=\""$(pkgdatadir)"\" \ + -DGCONF_SANITY_CHECK=\""$(GCONF_SANITY_CHECK)"\" \ + -DGCONFTOOL_CMD=\"$(GCONFTOOL)\" +Index: gnome-session-2.24.0/gnome-session/test-logout.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ gnome-session-2.24.0/gnome-session/test-logout.c 2008-09-23 10:01:48.000000000 +0200 +@@ -0,0 +1,117 @@ ++/* -*- Mode: C; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 8 -*- ++ * ++ * Copyright (C) 2008 Novell, Inc. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of the ++ * License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, but ++ * WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ * General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA ++ * 02111-1307, USA. ++ * ++ */ ++ ++#include "config.h" ++ ++#include ++ ++#include ++ ++#include "gsm-logout-dialog.h" ++ ++static void ++logout_dialog_response (GsmLogoutDialog *logout_dialog, ++ guint response_id, ++ gpointer data) ++{ ++ /* In case of dialog cancel, switch user, hibernate and ++ * suspend, we just perform the respective action and return, ++ * without shutting down the session. */ ++ switch (response_id) { ++ case GTK_RESPONSE_CANCEL: ++ case GTK_RESPONSE_NONE: ++ case GTK_RESPONSE_DELETE_EVENT: ++ g_print ("Cancel\n"); ++ break; ++ case GTK_RESPONSE_HELP: ++ g_print ("Help\n"); ++ break; ++ case GSM_LOGOUT_RESPONSE_SWITCH_USER: ++ g_print ("Switch user\n"); ++ break; ++ case GSM_LOGOUT_RESPONSE_HIBERNATE: ++ g_print ("Hibernate\n"); ++ break; ++ case GSM_LOGOUT_RESPONSE_SLEEP: ++ g_print ("Suspend\n"); ++ break; ++ case GSM_LOGOUT_RESPONSE_SHUTDOWN: ++ g_print ("Shutdown\n"); ++ break; ++ case GSM_LOGOUT_RESPONSE_REBOOT: ++ g_print ("Reboot\n"); ++ break; ++ case GSM_LOGOUT_RESPONSE_LOGOUT: ++ g_print ("Logout\n"); ++ break; ++ default: ++ g_assert_not_reached (); ++ break; ++ } ++ ++ gtk_main_quit (); ++} ++ ++ ++int ++main (int argc, ++ char *argv[]) ++{ ++ GtkWidget *dialog; ++ GError *error; ++ ++ static gboolean logout; ++ static gboolean shutdown; ++ ++ static GOptionEntry entries[] = { ++ { "logout", 'l', 0, G_OPTION_ARG_NONE, &logout, "Test logout dialog", NULL }, ++ { "shutdown", 's', 0, G_OPTION_ARG_NONE, &shutdown, "Test shutdown dialog", NULL }, ++ { NULL, 0, 0, 0, NULL, NULL, NULL } ++ }; ++ ++ logout = shutdown = FALSE; ++ error = NULL; ++ ++ gtk_init_with_args (&argc, &argv, ++ (char *) " - test logout/shutdown dialogs", ++ entries, NULL, ++ &error); ++ if (error != NULL) { ++ g_warning ("%s", error->message); ++ g_error_free (error); ++ exit (1); ++ } ++ ++ if (!shutdown) ++ dialog = gsm_get_logout_dialog (gdk_screen_get_default (), ++ GDK_CURRENT_TIME); ++ else ++ dialog = gsm_get_shutdown_dialog (gdk_screen_get_default (), ++ GDK_CURRENT_TIME); ++ ++ g_signal_connect (dialog, "response", ++ G_CALLBACK (logout_dialog_response), NULL); ++ gtk_widget_show (dialog); ++ ++ gtk_main (); ++ ++ return 0; ++} +Index: gnome-session-2.24.0/gnome-session/gsm-logout-dialog.c +=================================================================== +--- gnome-session-2.24.0.orig/gnome-session/gsm-logout-dialog.c 2008-09-22 23:21:08.000000000 +0200 ++++ gnome-session-2.24.0/gnome-session/gsm-logout-dialog.c 2008-09-23 10:02:02.000000000 +0200 +@@ -37,8 +37,13 @@ + + #define AUTOMATIC_ACTION_TIMEOUT 60 + +-#define GSM_ICON_LOGOUT "system-log-out" +-#define GSM_ICON_SHUTDOWN "system-shutdown" ++#define GSM_ICON_LOGOUT "system-log-out" ++#define GSM_ICON_SWITCH "system-users" ++#define GSM_ICON_SHUTDOWN "system-shutdown" ++#define GSM_ICON_REBOOT "view-refresh" ++/* TODO: use gpm icons? */ ++#define GSM_ICON_HIBERNATE "drive-harddisk" ++#define GSM_ICON_SLEEP "sleep" + + typedef enum { + GSM_DIALOG_LOGOUT_TYPE_LOGOUT, +@@ -47,11 +52,12 @@ + + struct _GsmLogoutDialogPrivate + { +- GsmDialogLogoutType type; +- + GsmPowerManager *power_manager; + GsmConsolekit *consolekit; + ++ GtkWidget *info_label; ++ GtkWidget *cancel_button; ++ + int timeout; + unsigned int timeout_id; + +@@ -60,7 +66,8 @@ + + static GsmLogoutDialog *current_dialog = NULL; + +-static void gsm_logout_dialog_set_timeout (GsmLogoutDialog *logout_dialog); ++static void gsm_logout_dialog_set_timeout (GsmLogoutDialog *logout_dialog, ++ int seconds); + + static void gsm_logout_dialog_destroy (GsmLogoutDialog *logout_dialog, + gpointer data); +@@ -68,43 +75,10 @@ + static void gsm_logout_dialog_show (GsmLogoutDialog *logout_dialog, + gpointer data); + +-enum { +- PROP_0, +- PROP_MESSAGE_TYPE +-}; +- +-G_DEFINE_TYPE (GsmLogoutDialog, gsm_logout_dialog, GTK_TYPE_MESSAGE_DIALOG); +- +-static void +-gsm_logout_dialog_set_property (GObject *object, +- guint prop_id, +- const GValue *value, +- GParamSpec *pspec) +-{ +- switch (prop_id) { +- case PROP_MESSAGE_TYPE: +- break; +- default: +- G_OBJECT_WARN_INVALID_PROPERTY_ID (object, prop_id, pspec); +- break; +- } +-} ++static void gsm_logout_set_info_text (GsmLogoutDialog *logout_dialog, ++ int seconds); + +-static void +-gsm_logout_dialog_get_property (GObject *object, +- guint prop_id, +- GValue *value, +- GParamSpec *pspec) +-{ +- switch (prop_id) { +- case PROP_MESSAGE_TYPE: +- g_value_set_enum (value, GTK_MESSAGE_WARNING); +- break; +- default: +- G_OBJECT_WARN_INVALID_PROPERTY_ID (object, prop_id, pspec); +- break; +- } +-} ++G_DEFINE_TYPE (GsmLogoutDialog, gsm_logout_dialog, GTK_TYPE_DIALOG); + + static void + gsm_logout_dialog_class_init (GsmLogoutDialogClass *klass) +@@ -113,18 +87,6 @@ + + gobject_class = G_OBJECT_CLASS (klass); + +- /* This is a workaround to avoid a stupid crash: libgnomeui +- * listens for the "show" signal on all GtkMessageDialog and +- * gets the "message-type" of the dialogs. We will crash when +- * it accesses this property if we don't override it since we +- * didn't define it. */ +- gobject_class->set_property = gsm_logout_dialog_set_property; +- gobject_class->get_property = gsm_logout_dialog_get_property; +- +- g_object_class_override_property (gobject_class, +- PROP_MESSAGE_TYPE, +- "message-type"); +- + g_type_class_add_private (klass, sizeof (GsmLogoutDialogPrivate)); + } + +@@ -146,11 +108,23 @@ + logout_dialog->priv->timeout_id = 0; + logout_dialog->priv->timeout = 0; + logout_dialog->priv->default_response = GTK_RESPONSE_CANCEL; ++ logout_dialog->priv->info_label = NULL; + +- gtk_window_set_skip_taskbar_hint (GTK_WINDOW (logout_dialog), TRUE); ++ gtk_window_set_resizable (GTK_WINDOW (logout_dialog), FALSE); ++ gtk_dialog_set_has_separator (GTK_DIALOG (logout_dialog), FALSE); + gtk_window_set_keep_above (GTK_WINDOW (logout_dialog), TRUE); + gtk_window_stick (GTK_WINDOW (logout_dialog)); + ++ /* use HIG spacings */ ++ gtk_box_set_spacing (GTK_BOX (GTK_DIALOG (logout_dialog)->vbox), 12); ++ gtk_container_set_border_width (GTK_CONTAINER (logout_dialog), 6); ++ ++ gtk_dialog_add_button (GTK_DIALOG (logout_dialog), GTK_STOCK_HELP, ++ GTK_RESPONSE_HELP); ++ logout_dialog->priv->cancel_button = ++ gtk_dialog_add_button (GTK_DIALOG (logout_dialog), ++ GTK_STOCK_CANCEL, GTK_RESPONSE_CANCEL); ++ + logout_dialog->priv->power_manager = gsm_get_power_manager (); + + logout_dialog->priv->consolekit = gsm_get_consolekit (); +@@ -247,17 +221,83 @@ + } + + static void +-gsm_logout_dialog_show (GsmLogoutDialog *logout_dialog, gpointer user_data) ++gsm_logout_dialog_show (GsmLogoutDialog *logout_dialog, ++ gpointer user_data) + { +- gsm_logout_dialog_set_timeout (logout_dialog); ++ gsm_logout_set_info_text (logout_dialog, AUTOMATIC_ACTION_TIMEOUT); ++ ++ if (logout_dialog->priv->default_response != GTK_RESPONSE_CANCEL) ++ gsm_logout_dialog_set_timeout (logout_dialog, ++ AUTOMATIC_ACTION_TIMEOUT); ++} ++ ++static void ++gsm_logout_set_info_text (GsmLogoutDialog *logout_dialog, ++ int seconds) ++{ ++ const char *info_text; ++ char *buf; ++ char *markup; ++ char *name; ++ ++ switch (logout_dialog->priv->default_response) { ++ case GSM_LOGOUT_RESPONSE_LOGOUT: ++ info_text = ngettext ("You are currently logged in as " ++ "\"%s\".\n" ++ "You will be automatically logged out " ++ "in %d second.", ++ "You are currently logged in as " ++ "\"%s\".\n" ++ "You will be automatically logged out " ++ "in %d seconds.", ++ seconds); ++ break; ++ ++ case GSM_LOGOUT_RESPONSE_SHUTDOWN: ++ info_text = ngettext ("You are currently logged in as " ++ "\"%s\".\n" ++ "This system will be automatically shut " ++ "down in %d second.", ++ "You are currently logged in as " ++ "\"%s\".\n" ++ "This system will be automatically shut " ++ "down in %d seconds.", ++ seconds); ++ break; ++ ++ case GTK_RESPONSE_CANCEL: ++ info_text = _("You are currently logged in as \"%s\".\n"); ++ break; ++ ++ default: ++ g_assert_not_reached (); ++ } ++ ++ name = g_locale_to_utf8 (g_get_real_name (), -1, NULL, NULL, NULL); ++ ++ if (!name || name[0] == '\0' || strcmp (name, "Unknown") == 0) { ++ name = g_locale_to_utf8 (g_get_user_name (), -1 , NULL, NULL, NULL); ++ } ++ ++ if (!name) { ++ name = g_strdup (g_get_user_name ()); ++ } ++ ++ buf = g_strdup_printf (info_text, name, seconds); ++ markup = g_markup_printf_escaped ("%s", buf); ++ g_free (buf); ++ gtk_label_set_markup (GTK_LABEL (logout_dialog->priv->info_label), ++ markup); ++ ++ ++ g_free (name); ++ g_free (markup); + } + + static gboolean + gsm_logout_dialog_timeout (gpointer data) + { + GsmLogoutDialog *logout_dialog; +- char *secondary_text; +- char *name; + int seconds_to_show; + + logout_dialog = (GsmLogoutDialog *) data; +@@ -278,73 +318,129 @@ + seconds_to_show += 10; + } + +- switch (logout_dialog->priv->type) { +- case GSM_DIALOG_LOGOUT_TYPE_LOGOUT: +- secondary_text = ngettext ("You are currently logged in as " +- "\"%s\".\n" +- "You will be automatically logged " +- "out in %d second.", +- "You are currently logged in as " +- "\"%s\".\n" +- "You will be automatically logged " +- "out in %d seconds.", +- seconds_to_show); +- break; ++ gsm_logout_set_info_text (logout_dialog, seconds_to_show); + +- case GSM_DIALOG_LOGOUT_TYPE_SHUTDOWN: +- secondary_text = ngettext ("You are currently logged in as " +- "\"%s\".\n" +- "This system will be automatically " +- "shut down in %d second.", +- "You are currently logged in as " +- "\"%s\".\n" +- "This system will be automatically " +- "shut down in %d seconds.", +- seconds_to_show); +- break; ++ logout_dialog->priv->timeout--; ++ ++ return TRUE; ++} + +- default: +- g_assert_not_reached (); ++static void ++gsm_logout_dialog_set_timeout (GsmLogoutDialog *logout_dialog, ++ int seconds) ++{ ++ logout_dialog->priv->timeout = seconds; ++ ++ if (logout_dialog->priv->timeout_id != 0) { ++ g_source_remove (logout_dialog->priv->timeout_id); + } + +- name = g_locale_to_utf8 (g_get_real_name (), -1, NULL, NULL, NULL); ++ logout_dialog->priv->timeout_id = g_timeout_add (1000, ++ gsm_logout_dialog_timeout, ++ logout_dialog); ++} + +- if (!name || name[0] == '\0' || strcmp (name, "Unknown") == 0) { +- name = g_locale_to_utf8 (g_get_user_name (), -1 , NULL, NULL, NULL); +- } ++static GtkWidget * ++gsm_logout_tile_new (const char *icon_name, ++ const char *title, ++ const char *description) ++{ ++ GtkWidget *button; ++ GtkWidget *alignment; ++ GtkWidget *hbox; ++ GtkWidget *vbox; ++ GtkWidget *image; ++ GtkWidget *label; ++ char *markup; + +- if (!name) { +- name = g_strdup (g_get_user_name ()); ++ g_assert (title != NULL); ++ ++ button = GTK_WIDGET (gtk_button_new ()); ++ gtk_button_set_relief (GTK_BUTTON (button), GTK_RELIEF_NONE); ++ ++ alignment = gtk_alignment_new (0, 0.5, 0, 0); ++ gtk_alignment_set_padding (GTK_ALIGNMENT (alignment), 0, 0, 6, 6); ++ gtk_container_add (GTK_CONTAINER (button), alignment); ++ ++ hbox = gtk_hbox_new (FALSE, 12); ++ gtk_container_add (GTK_CONTAINER (alignment), hbox); ++ if (icon_name != NULL) { ++ image = gtk_image_new_from_icon_name (icon_name, ++ GTK_ICON_SIZE_DIALOG); ++ gtk_box_pack_start (GTK_BOX (hbox), image, FALSE, FALSE, 0); + } + +- gtk_message_dialog_format_secondary_text (GTK_MESSAGE_DIALOG (logout_dialog), +- secondary_text, +- name, +- seconds_to_show, +- NULL); ++ vbox = gtk_vbox_new (FALSE, 2); + +- logout_dialog->priv->timeout--; ++ markup = g_markup_printf_escaped ("%s", ++ title); ++ label = gtk_label_new (markup); ++ g_free (markup); + +- g_free (name); ++ gtk_label_set_use_markup (GTK_LABEL (label), TRUE); ++ gtk_misc_set_alignment (GTK_MISC (label), 0.0, 0.5); ++ gtk_label_set_use_underline (GTK_LABEL (label), TRUE); + +- return TRUE; ++ gtk_box_pack_start (GTK_BOX (vbox), label, FALSE, FALSE, 0); ++ ++ if (description != NULL) { ++ gchar *markup; ++ GdkColor *color; ++ GtkWidget *label; ++ ++ color = >K_WIDGET (button)->style->fg[GTK_STATE_INSENSITIVE]; ++ markup = g_markup_printf_escaped ("%s", ++ color->red, ++ color->green, ++ color->blue, ++ description); ++ label = gtk_label_new (markup); ++ g_free (markup); ++ ++ gtk_label_set_use_markup (GTK_LABEL (label), TRUE); ++ gtk_misc_set_alignment (GTK_MISC (label), 0.0, 0.5); ++ gtk_label_set_use_underline (GTK_LABEL (label), TRUE); ++ gtk_label_set_line_wrap (GTK_LABEL (label), TRUE); ++ ++ gtk_box_pack_start (GTK_BOX (vbox), label, FALSE, FALSE, 0); ++ } ++ ++ gtk_box_pack_start (GTK_BOX (hbox), vbox, FALSE, FALSE, 0); ++ ++ return button; + } + + static void +-gsm_logout_dialog_set_timeout (GsmLogoutDialog *logout_dialog) ++gsm_logout_tile_clicked (GtkWidget *tile, ++ gpointer response_p) + { +- logout_dialog->priv->timeout = AUTOMATIC_ACTION_TIMEOUT; ++ GtkWidget *dialog; + +- /* Sets the secondary text */ +- gsm_logout_dialog_timeout (logout_dialog); ++ dialog = gtk_widget_get_toplevel (tile); ++ g_assert (GTK_IS_DIALOG (dialog)); ++ gtk_dialog_response (GTK_DIALOG (dialog), ++ GPOINTER_TO_UINT (response_p)); ++} + +- if (logout_dialog->priv->timeout_id != 0) { +- g_source_remove (logout_dialog->priv->timeout_id); +- } ++static GtkWidget * ++gsm_logout_append_tile (GtkWidget *vbox, ++ unsigned int response, ++ const char *icon_name, ++ const char *title, ++ const char *description) ++{ ++ GtkWidget *tile; ++ ++ tile = gsm_logout_tile_new (icon_name, title, description); ++ gtk_box_pack_start (GTK_BOX (vbox), tile, TRUE, TRUE, 0); ++ gtk_widget_show_all (tile); ++ ++ g_signal_connect (tile, ++ "clicked", ++ G_CALLBACK (gsm_logout_tile_clicked), ++ GUINT_TO_POINTER (response)); + +- logout_dialog->priv->timeout_id = g_timeout_add (1000, +- gsm_logout_dialog_timeout, +- logout_dialog); ++ return tile; + } + + static GtkWidget * +@@ -353,8 +449,10 @@ + guint32 activate_time) + { + GsmLogoutDialog *logout_dialog; +- const char *primary_text; ++ GtkWidget *vbox; ++ GtkWidget *tile; + const char *icon_name; ++ const char *title; + + if (current_dialog != NULL) { + gtk_widget_destroy (GTK_WIDGET (current_dialog)); +@@ -364,82 +462,119 @@ + + current_dialog = logout_dialog; + +- gtk_window_set_title (GTK_WINDOW (logout_dialog), ""); +- +- logout_dialog->priv->type = type; ++ vbox = gtk_vbox_new (FALSE, 12); ++ gtk_box_pack_start (GTK_BOX (GTK_DIALOG (logout_dialog)->vbox), vbox, ++ FALSE, FALSE, 0); ++ gtk_container_set_border_width (GTK_CONTAINER (vbox), 6); ++ gtk_widget_show (vbox); + + icon_name = NULL; +- primary_text = NULL; ++ title = NULL; + + switch (type) { + case GSM_DIALOG_LOGOUT_TYPE_LOGOUT: + icon_name = GSM_ICON_LOGOUT; +- primary_text = _("Log out of this system now?"); ++ title = _("Log Out of the Session"); + + logout_dialog->priv->default_response = GSM_LOGOUT_RESPONSE_LOGOUT; + +- if (gsm_logout_supports_switch_user (logout_dialog)) { +- gtk_dialog_add_button (GTK_DIALOG (logout_dialog), ++ ++ gsm_logout_append_tile (vbox, GSM_LOGOUT_RESPONSE_LOGOUT, ++ GSM_ICON_LOGOUT, _("_Log Out"), ++ _("Ends your session and logs you " ++ "out.")); ++ ++ tile = gsm_logout_append_tile (vbox, ++ GSM_LOGOUT_RESPONSE_SWITCH_USER, ++ GSM_ICON_SWITCH, + _("_Switch User"), +- GSM_LOGOUT_RESPONSE_SWITCH_USER); ++ _("Suspends your session, " ++ "allowing another user to " ++ "log in and use the " ++ "computer.")); ++ if (!gsm_logout_supports_switch_user (logout_dialog)) { ++ gtk_widget_set_sensitive (tile, FALSE); + } + +- gtk_dialog_add_button (GTK_DIALOG (logout_dialog), +- GTK_STOCK_CANCEL, +- GTK_RESPONSE_CANCEL); +- +- gtk_dialog_add_button (GTK_DIALOG (logout_dialog), +- _("_Log Out"), +- GSM_LOGOUT_RESPONSE_LOGOUT); +- + break; + case GSM_DIALOG_LOGOUT_TYPE_SHUTDOWN: + icon_name = GSM_ICON_SHUTDOWN; +- primary_text = _("Shut down this system now?"); ++ title = _("Shut Down the Computer"); + + logout_dialog->priv->default_response = GSM_LOGOUT_RESPONSE_SHUTDOWN; + +- if (gsm_logout_supports_system_suspend (logout_dialog)) { +- gtk_dialog_add_button (GTK_DIALOG (logout_dialog), +- _("S_uspend"), +- GSM_LOGOUT_RESPONSE_SLEEP); ++ tile = gsm_logout_append_tile (vbox, ++ GSM_LOGOUT_RESPONSE_SHUTDOWN, ++ GSM_ICON_SHUTDOWN, ++ _("_Shut Down"), ++ _("Ends your session and turns " ++ "off the computer.")); ++ if (!gsm_logout_supports_shutdown (logout_dialog)) { ++ gtk_widget_set_sensitive (tile, FALSE); ++ /* If shutdown is not available, let's just fallback ++ * on cancel as the default action. We could fallback ++ * on reboot first, then suspend and then hibernate ++ * but it's not that useful, really */ ++ logout_dialog->priv->default_response = GTK_RESPONSE_CANCEL; + } + +- if (gsm_logout_supports_system_hibernate (logout_dialog)) { +- gtk_dialog_add_button (GTK_DIALOG (logout_dialog), +- _("_Hibernate"), +- GSM_LOGOUT_RESPONSE_HIBERNATE); ++ tile = gsm_logout_append_tile (vbox, ++ GSM_LOGOUT_RESPONSE_REBOOT, ++ GSM_ICON_REBOOT, _("_Restart"), ++ _("Ends your session and " ++ "restarts the computer.")); ++ if (!gsm_logout_supports_reboot (logout_dialog)) { ++ gtk_widget_set_sensitive (tile, FALSE); + } + +- if (gsm_logout_supports_reboot (logout_dialog)) { +- gtk_dialog_add_button (GTK_DIALOG (logout_dialog), +- _("_Restart"), +- GSM_LOGOUT_RESPONSE_REBOOT); ++ /* We don't set those options insensitive if they are no ++ * supported (like we do for shutdown/restart) since some ++ * hardware just don't support suspend/hibernate. So we ++ * don't show those options in this case. */ ++ if (gsm_logout_supports_system_suspend (logout_dialog)) { ++ gsm_logout_append_tile (vbox, ++ GSM_LOGOUT_RESPONSE_SLEEP, ++ GSM_ICON_SLEEP, _("S_uspend"), ++ _("Suspends your session " ++ "quickly, using minimal " ++ "power while the computer " ++ "stands by.")); + } + +- gtk_dialog_add_button (GTK_DIALOG (logout_dialog), +- GTK_STOCK_CANCEL, +- GTK_RESPONSE_CANCEL); +- +- if (gsm_logout_supports_shutdown (logout_dialog)) { +- gtk_dialog_add_button (GTK_DIALOG (logout_dialog), +- _("_Shut Down"), +- GSM_LOGOUT_RESPONSE_SHUTDOWN); ++ if (gsm_logout_supports_system_hibernate (logout_dialog)) { ++ gsm_logout_append_tile (vbox, ++ GSM_LOGOUT_RESPONSE_HIBERNATE, ++ GSM_ICON_HIBERNATE, ++ _("_Hibernate"), ++ _("Suspends your session, " ++ "using no power until the " ++ "computer is restarted.")); + } ++ + break; + default: + g_assert_not_reached (); + } + +- gtk_image_set_from_icon_name (GTK_IMAGE (GTK_MESSAGE_DIALOG (logout_dialog)->image), +- icon_name, GTK_ICON_SIZE_DIALOG); ++ logout_dialog->priv->info_label = gtk_label_new (""); ++ gtk_label_set_line_wrap (GTK_LABEL (logout_dialog->priv->info_label), ++ TRUE); ++ gtk_box_pack_start (GTK_BOX (vbox), logout_dialog->priv->info_label, ++ TRUE, TRUE, 0); ++ gtk_widget_show (logout_dialog->priv->info_label); ++ + gtk_window_set_icon_name (GTK_WINDOW (logout_dialog), icon_name); +- gtk_window_set_position (GTK_WINDOW (logout_dialog), GTK_WIN_POS_CENTER_ALWAYS); +- gtk_label_set_text (GTK_LABEL (GTK_MESSAGE_DIALOG (logout_dialog)->label), +- primary_text); ++ gtk_window_set_title (GTK_WINDOW (logout_dialog), title); ++ gtk_window_set_position (GTK_WINDOW (logout_dialog), ++ GTK_WIN_POS_CENTER_ALWAYS); + + gtk_dialog_set_default_response (GTK_DIALOG (logout_dialog), + logout_dialog->priv->default_response); ++ /* Note that focus is on the widget for the default response by default ++ * (since they're the first widget, except when it's Cancel */ ++ if (logout_dialog->priv->default_response == GTK_RESPONSE_CANCEL) ++ gtk_window_set_focus (GTK_WINDOW (logout_dialog), ++ logout_dialog->priv->cancel_button); + + gtk_window_set_screen (GTK_WINDOW (logout_dialog), screen); + --- gnome-session-2.25.90.orig/debian/patches/19_gnome-wm-tweaking.patch +++ gnome-session-2.25.90/debian/patches/19_gnome-wm-tweaking.patch @@ -0,0 +1,75 @@ +Index: gnome-session-2.23.92/data/gnome-wm +=================================================================== +--- gnome-session-2.23.92.orig/data/gnome-wm 2008-09-02 23:53:44.000000000 +0200 ++++ gnome-session-2.23.92/data/gnome-wm 2008-09-10 13:53:23.000000000 +0200 +@@ -1,7 +1,8 @@ + #!/bin/sh + + # The user can specify his prefered WM by setting the WINDOW_MANAGER +-# environment variable. ++# environment variable or setting the ++# /desktop/gnome/applications/window_manager/default gconf key. + # + # If this is not set, we search a list of known windowmanagers and use + # the first one that is found in the users's PATH +@@ -40,6 +41,30 @@ + esac + done + ++# Get previously set window manager in gconf ++if [ ! "$DEFWM" ]; then ++ DEFWM=`gconftool-2 -g /desktop/gnome/applications/window_manager/default 2>/dev/null` ++fi ++ ++# special case handling for dapper upgrades (this runs only once after the upgrade) ++if [ -z "$DEFWM" ] && [ -f /var/lib/gnome-session/dapper-upgrade ]; then ++ gconftool-2 -s /desktop/gnome/applications/window_manager/default /usr/bin/metacity --type string ++ DEFWM=/usr/bin/metacity ++fi ++ ++# If not exist, set to compiz (if available) ++if [ ! -x "$DEFWM" ]; then ++ if [ -x "/usr/bin/compiz" ]; then ++ gconftool-2 -s /desktop/gnome/applications/window_manager/default /usr/bin/compiz --type string ++ DEFWM=/usr/bin/compiz ++ elif [ -x "/usr/bin/metacity" ]; then ++ gconftool-2 -s /desktop/gnome/applications/window_manager/default /usr/bin/metacity --type string ++ DEFWM=/usr/bin/metacity ++ else ++ unset DEFWM ++ fi ++fi ++ + # WINDOW_MANAGER overrides all + if [ -z "$WINDOW_MANAGER" ] ; then + WINDOW_MANAGER=`gconftool-2 --get /desktop/gnome/session/required_components/windowmanager 2> /dev/null` +@@ -87,7 +112,7 @@ + + if [ -z "$WINDOW_MANAGER" ] ; then + echo "WARNING: No window manager can be found." +- WINDOW_MANAGER=xterm ++ WINDOW_MANAGER=`readlink /etc/alternatives/x-terminal-emulator 2>/dev/null` + fi + + # Now create options OPT1, OPT2 and OPT3 based on the windowmanager used +@@ -129,17 +154,14 @@ + fi + + case `basename $WINDOW_MANAGER` in +- compiz) +- export LIBGL_ALWAYS_INDIRECT=1 +- gtk-window-decorator & +- OPT3=glib +- OPT4=gconf +- ;; + beryl) + emerald & + ;; + esac + ++# Store the selected WM with gconf ++gconftool-2 -t string -s /desktop/gnome/applications/window_manager/current "$WINDOW_MANAGER" ++ + exec $WINDOW_MANAGER $OPT1 $OPT2 $OPT3 $OPT4 + + echo "ERROR: No window manager could run!" --- gnome-session-2.25.90.orig/debian/patches/98_autotools.patch +++ gnome-session-2.25.90/debian/patches/98_autotools.patch @@ -0,0 +1,68760 @@ +Index: gnome-session-2.25.90/Makefile.in +=================================================================== +--- gnome-session-2.25.90.orig/Makefile.in 2009-02-04 18:27:04.000000000 +0000 ++++ gnome-session-2.25.90/Makefile.in 2009-02-04 18:30:00.000000000 +0000 +@@ -90,10 +90,6 @@ + COMPAT_LIBS = @COMPAT_LIBS@ + CPP = @CPP@ + CPPFLAGS = @CPPFLAGS@ +-CXX = @CXX@ +-CXXCPP = @CXXCPP@ +-CXXDEPMODE = @CXXDEPMODE@ +-CXXFLAGS = @CXXFLAGS@ + CYGPATH_W = @CYGPATH_W@ + DATADIRNAME = @DATADIRNAME@ + DBUS_GLIB_CFLAGS = @DBUS_GLIB_CFLAGS@ +@@ -103,7 +99,7 @@ + DISABLE_DEPRECATED = @DISABLE_DEPRECATED@ + DISABLE_DEPRECATED_CFLAGS = @DISABLE_DEPRECATED_CFLAGS@ + DSYMUTIL = @DSYMUTIL@ +-ECHO = @ECHO@ ++DUMPBIN = @DUMPBIN@ + ECHO_C = @ECHO_C@ + ECHO_N = @ECHO_N@ + ECHO_T = @ECHO_T@ +@@ -111,8 +107,7 @@ + EGG_SMCLIENT_LIBS = @EGG_SMCLIENT_LIBS@ + EGREP = @EGREP@ + EXEEXT = @EXEEXT@ +-F77 = @F77@ +-FFLAGS = @FFLAGS@ ++FGREP = @FGREP@ + GCONFTOOL = @GCONFTOOL@ + GCONF_CFLAGS = @GCONF_CFLAGS@ + GCONF_LIBS = @GCONF_LIBS@ +@@ -137,14 +132,35 @@ + INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ + INSTOBJEXT = @INSTOBJEXT@ + INTLLIBS = @INTLLIBS@ ++INTLTOOL_CAVES_RULE = @INTLTOOL_CAVES_RULE@ ++INTLTOOL_DESKTOP_RULE = @INTLTOOL_DESKTOP_RULE@ ++INTLTOOL_DIRECTORY_RULE = @INTLTOOL_DIRECTORY_RULE@ + INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ ++INTLTOOL_KBD_RULE = @INTLTOOL_KBD_RULE@ ++INTLTOOL_KEYS_RULE = @INTLTOOL_KEYS_RULE@ + INTLTOOL_MERGE = @INTLTOOL_MERGE@ ++INTLTOOL_OAF_RULE = @INTLTOOL_OAF_RULE@ + INTLTOOL_PERL = @INTLTOOL_PERL@ ++INTLTOOL_POLICY_RULE = @INTLTOOL_POLICY_RULE@ ++INTLTOOL_PONG_RULE = @INTLTOOL_PONG_RULE@ ++INTLTOOL_PROP_RULE = @INTLTOOL_PROP_RULE@ ++INTLTOOL_SCHEMAS_RULE = @INTLTOOL_SCHEMAS_RULE@ ++INTLTOOL_SERVER_RULE = @INTLTOOL_SERVER_RULE@ ++INTLTOOL_SERVICE_RULE = @INTLTOOL_SERVICE_RULE@ ++INTLTOOL_SHEET_RULE = @INTLTOOL_SHEET_RULE@ ++INTLTOOL_SOUNDLIST_RULE = @INTLTOOL_SOUNDLIST_RULE@ ++INTLTOOL_THEME_RULE = @INTLTOOL_THEME_RULE@ ++INTLTOOL_UI_RULE = @INTLTOOL_UI_RULE@ + INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ ++INTLTOOL_XAM_RULE = @INTLTOOL_XAM_RULE@ ++INTLTOOL_XML_NOMERGE_RULE = @INTLTOOL_XML_NOMERGE_RULE@ ++INTLTOOL_XML_RULE = @INTLTOOL_XML_RULE@ ++LD = @LD@ + LDFLAGS = @LDFLAGS@ + LIBOBJS = @LIBOBJS@ + LIBS = @LIBS@ + LIBTOOL = @LIBTOOL@ ++LIPO = @LIPO@ + LN_S = @LN_S@ + LTLIBOBJS = @LTLIBOBJS@ + MAINT = @MAINT@ +@@ -154,8 +170,11 @@ + MSGFMT = @MSGFMT@ + MSGFMT_OPTS = @MSGFMT_OPTS@ + MSGMERGE = @MSGMERGE@ ++NM = @NM@ + NMEDIT = @NMEDIT@ + OBJEXT = @OBJEXT@ ++OTOOL = @OTOOL@ ++OTOOL64 = @OTOOL64@ + PACKAGE = @PACKAGE@ + PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ + PACKAGE_NAME = @PACKAGE_NAME@ +@@ -203,8 +222,7 @@ + abs_top_builddir = @abs_top_builddir@ + abs_top_srcdir = @abs_top_srcdir@ + ac_ct_CC = @ac_ct_CC@ +-ac_ct_CXX = @ac_ct_CXX@ +-ac_ct_F77 = @ac_ct_F77@ ++ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ + am__include = @am__include@ + am__leading_dot = @am__leading_dot@ + am__quote = @am__quote@ +@@ -235,6 +253,7 @@ + libexecdir = @libexecdir@ + localedir = @localedir@ + localstatedir = @localstatedir@ ++lt_ECHO = @lt_ECHO@ + mandir = @mandir@ + mkdir_p = @mkdir_p@ + oldincludedir = @oldincludedir@ +@@ -247,7 +266,6 @@ + srcdir = @srcdir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ +-top_build_prefix = @top_build_prefix@ + top_builddir = @top_builddir@ + top_srcdir = @top_srcdir@ + SUBDIRS = \ +Index: gnome-session-2.25.90/aclocal.m4 +=================================================================== +--- gnome-session-2.25.90.orig/aclocal.m4 2009-02-04 18:27:09.000000000 +0000 ++++ gnome-session-2.25.90/aclocal.m4 2009-02-04 18:29:53.000000000 +0000 +@@ -13,1970 +13,1701 @@ + + m4_ifndef([AC_AUTOCONF_VERSION], + [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl +-m4_if(AC_AUTOCONF_VERSION, [2.62],, +-[m4_warning([this file was generated for autoconf 2.62. ++m4_if(AC_AUTOCONF_VERSION, [2.61],, ++[m4_warning([this file was generated for autoconf 2.61. + You have another version of autoconf. It may work, but is not guaranteed to. + If you have problems, you may need to regenerate the build system entirely. + To do so, use the procedure documented by the package, typically `autoreconf'.])]) + +-# Copyright (C) 2002, 2003, 2005, 2006, 2007 Free Software Foundation, Inc. +-# +-# This file is free software; the Free Software Foundation +-# gives unlimited permission to copy and/or distribute it, +-# with or without modifications, as long as this notice is preserved. ++dnl AM_GCONF_SOURCE_2 ++dnl Defines GCONF_SCHEMA_CONFIG_SOURCE which is where you should install schemas ++dnl (i.e. pass to gconftool-2 ++dnl Defines GCONF_SCHEMA_FILE_DIR which is a filesystem directory where ++dnl you should install foo.schemas files ++dnl + +-# AM_AUTOMAKE_VERSION(VERSION) +-# ---------------------------- +-# Automake X.Y traces this macro to ensure aclocal.m4 has been +-# generated from the m4 files accompanying Automake X.Y. +-# (This private macro should not be called outside this file.) +-AC_DEFUN([AM_AUTOMAKE_VERSION], +-[am__api_version='1.10' +-dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to +-dnl require some minimum version. Point them to the right macro. +-m4_if([$1], [1.10.1], [], +- [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl +-]) ++AC_DEFUN([AM_GCONF_SOURCE_2], ++[ ++ if test "x$GCONF_SCHEMA_INSTALL_SOURCE" = "x"; then ++ GCONF_SCHEMA_CONFIG_SOURCE=`gconftool-2 --get-default-source` ++ else ++ GCONF_SCHEMA_CONFIG_SOURCE=$GCONF_SCHEMA_INSTALL_SOURCE ++ fi + +-# _AM_AUTOCONF_VERSION(VERSION) +-# ----------------------------- +-# aclocal traces this macro to find the Autoconf version. +-# This is a private macro too. Using m4_define simplifies +-# the logic in aclocal, which can simply ignore this definition. +-m4_define([_AM_AUTOCONF_VERSION], []) ++ AC_ARG_WITH([gconf-source], ++ AC_HELP_STRING([--with-gconf-source=sourceaddress], ++ [Config database for installing schema files.]), ++ [GCONF_SCHEMA_CONFIG_SOURCE="$withval"],) + +-# AM_SET_CURRENT_AUTOMAKE_VERSION +-# ------------------------------- +-# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced. +-# This function is AC_REQUIREd by AC_INIT_AUTOMAKE. +-AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], +-[AM_AUTOMAKE_VERSION([1.10.1])dnl +-m4_ifndef([AC_AUTOCONF_VERSION], +- [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl +-_AM_AUTOCONF_VERSION(AC_AUTOCONF_VERSION)]) ++ AC_SUBST(GCONF_SCHEMA_CONFIG_SOURCE) ++ AC_MSG_RESULT([Using config source $GCONF_SCHEMA_CONFIG_SOURCE for schema installation]) + +-# AM_AUX_DIR_EXPAND -*- Autoconf -*- ++ if test "x$GCONF_SCHEMA_FILE_DIR" = "x"; then ++ GCONF_SCHEMA_FILE_DIR='$(sysconfdir)/gconf/schemas' ++ fi + +-# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. +-# +-# This file is free software; the Free Software Foundation +-# gives unlimited permission to copy and/or distribute it, +-# with or without modifications, as long as this notice is preserved. ++ AC_ARG_WITH([gconf-schema-file-dir], ++ AC_HELP_STRING([--with-gconf-schema-file-dir=dir], ++ [Directory for installing schema files.]), ++ [GCONF_SCHEMA_FILE_DIR="$withval"],) + +-# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets +-# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to +-# `$srcdir', `$srcdir/..', or `$srcdir/../..'. ++ AC_SUBST(GCONF_SCHEMA_FILE_DIR) ++ AC_MSG_RESULT([Using $GCONF_SCHEMA_FILE_DIR as install directory for schema files]) ++ ++ AC_ARG_ENABLE(schemas-install, ++ [ --disable-schemas-install Disable the schemas installation], ++ [case ${enableval} in ++ yes|no) ;; ++ *) AC_MSG_ERROR(bad value ${enableval} for --enable-schemas-install) ;; ++ esac]) ++ AM_CONDITIONAL([GCONF_SCHEMAS_INSTALL], [test "$enable_schemas_install" != no]) ++]) ++ ++# Copyright (C) 1995-2002 Free Software Foundation, Inc. ++# Copyright (C) 2001-2003,2004 Red Hat, Inc. + # +-# Of course, Automake must honor this variable whenever it calls a +-# tool from the auxiliary directory. The problem is that $srcdir (and +-# therefore $ac_aux_dir as well) can be either absolute or relative, +-# depending on how configure is run. This is pretty annoying, since +-# it makes $ac_aux_dir quite unusable in subdirectories: in the top +-# source directory, any form will work fine, but in subdirectories a +-# relative path needs to be adjusted first. ++# This file is free software, distributed under the terms of the GNU ++# General Public License. As a special exception to the GNU General ++# Public License, this file may be distributed as part of a program ++# that contains a configuration script generated by Autoconf, under ++# the same distribution terms as the rest of that program. + # +-# $ac_aux_dir/missing +-# fails when called from a subdirectory if $ac_aux_dir is relative +-# $top_srcdir/$ac_aux_dir/missing +-# fails if $ac_aux_dir is absolute, +-# fails when called from a subdirectory in a VPATH build with +-# a relative $ac_aux_dir ++# This file can be copied and used freely without restrictions. It can ++# be used in projects which are not available under the GNU Public License ++# but which still want to provide support for the GNU gettext functionality. + # +-# The reason of the latter failure is that $top_srcdir and $ac_aux_dir +-# are both prefixed by $srcdir. In an in-source build this is usually +-# harmless because $srcdir is `.', but things will broke when you +-# start a VPATH build or use an absolute $srcdir. ++# Macro to add for using GNU gettext. ++# Ulrich Drepper , 1995, 1996 + # +-# So we could use something similar to $top_srcdir/$ac_aux_dir/missing, +-# iff we strip the leading $srcdir from $ac_aux_dir. That would be: +-# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` +-# and then we would define $MISSING as +-# MISSING="\${SHELL} $am_aux_dir/missing" +-# This will work as long as MISSING is not called from configure, because +-# unfortunately $(top_srcdir) has no meaning in configure. +-# However there are other variables, like CC, which are often used in +-# configure, and could therefore not use this "fixed" $ac_aux_dir. ++# Modified to never use included libintl. ++# Owen Taylor , 12/15/1998 + # +-# Another solution, used here, is to always expand $ac_aux_dir to an +-# absolute PATH. The drawback is that using absolute paths prevent a +-# configured tree to be moved without reconfiguration. +- +-AC_DEFUN([AM_AUX_DIR_EXPAND], +-[dnl Rely on autoconf to set up CDPATH properly. +-AC_PREREQ([2.50])dnl +-# expand $ac_aux_dir to an absolute path +-am_aux_dir=`cd $ac_aux_dir && pwd` +-]) +- +-# AM_CONDITIONAL -*- Autoconf -*- +- +-# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006 +-# Free Software Foundation, Inc. ++# Major rework to remove unused code ++# Owen Taylor , 12/11/2002 + # +-# This file is free software; the Free Software Foundation +-# gives unlimited permission to copy and/or distribute it, +-# with or without modifications, as long as this notice is preserved. ++# Added better handling of ALL_LINGUAS from GNU gettext version ++# written by Bruno Haible, Owen Taylor 5/30/3002 ++# ++# Modified to require ngettext ++# Matthias Clasen 08/06/2004 ++# ++# We need this here as well, since someone might use autoconf-2.5x ++# to configure GLib then an older version to configure a package ++# using AM_GLIB_GNU_GETTEXT ++AC_PREREQ(2.53) + +-# serial 8 ++dnl ++dnl We go to great lengths to make sure that aclocal won't ++dnl try to pull in the installed version of these macros ++dnl when running aclocal in the glib directory. ++dnl ++m4_copy([AC_DEFUN],[glib_DEFUN]) ++m4_copy([AC_REQUIRE],[glib_REQUIRE]) ++dnl ++dnl At the end, if we're not within glib, we'll define the public ++dnl definitions in terms of our private definitions. ++dnl + +-# AM_CONDITIONAL(NAME, SHELL-CONDITION) +-# ------------------------------------- +-# Define a conditional. +-AC_DEFUN([AM_CONDITIONAL], +-[AC_PREREQ(2.52)dnl +- ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], +- [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl +-AC_SUBST([$1_TRUE])dnl +-AC_SUBST([$1_FALSE])dnl +-_AM_SUBST_NOTMAKE([$1_TRUE])dnl +-_AM_SUBST_NOTMAKE([$1_FALSE])dnl +-if $2; then +- $1_TRUE= +- $1_FALSE='#' ++# GLIB_LC_MESSAGES ++#-------------------- ++glib_DEFUN([GLIB_LC_MESSAGES], ++ [AC_CHECK_HEADERS([locale.h]) ++ if test $ac_cv_header_locale_h = yes; then ++ AC_CACHE_CHECK([for LC_MESSAGES], am_cv_val_LC_MESSAGES, ++ [AC_TRY_LINK([#include ], [return LC_MESSAGES], ++ am_cv_val_LC_MESSAGES=yes, am_cv_val_LC_MESSAGES=no)]) ++ if test $am_cv_val_LC_MESSAGES = yes; then ++ AC_DEFINE(HAVE_LC_MESSAGES, 1, ++ [Define if your file defines LC_MESSAGES.]) ++ fi ++ fi]) ++ ++# GLIB_PATH_PROG_WITH_TEST ++#---------------------------- ++dnl GLIB_PATH_PROG_WITH_TEST(VARIABLE, PROG-TO-CHECK-FOR, ++dnl TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]]) ++glib_DEFUN([GLIB_PATH_PROG_WITH_TEST], ++[# Extract the first word of "$2", so it can be a program name with args. ++set dummy $2; ac_word=[$]2 ++AC_MSG_CHECKING([for $ac_word]) ++AC_CACHE_VAL(ac_cv_path_$1, ++[case "[$]$1" in ++ /*) ++ ac_cv_path_$1="[$]$1" # Let the user override the test with a path. ++ ;; ++ *) ++ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" ++ for ac_dir in ifelse([$5], , $PATH, [$5]); do ++ test -z "$ac_dir" && ac_dir=. ++ if test -f $ac_dir/$ac_word; then ++ if [$3]; then ++ ac_cv_path_$1="$ac_dir/$ac_word" ++ break ++ fi ++ fi ++ done ++ IFS="$ac_save_ifs" ++dnl If no 4th arg is given, leave the cache variable unset, ++dnl so AC_PATH_PROGS will keep looking. ++ifelse([$4], , , [ test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4" ++])dnl ++ ;; ++esac])dnl ++$1="$ac_cv_path_$1" ++if test ifelse([$4], , [-n "[$]$1"], ["[$]$1" != "$4"]); then ++ AC_MSG_RESULT([$]$1) + else +- $1_TRUE='#' +- $1_FALSE= ++ AC_MSG_RESULT(no) + fi +-AC_CONFIG_COMMANDS_PRE( +-[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then +- AC_MSG_ERROR([[conditional "$1" was never defined. +-Usually this means the macro was only invoked conditionally.]]) +-fi])]) +- +-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006 +-# Free Software Foundation, Inc. +-# +-# This file is free software; the Free Software Foundation +-# gives unlimited permission to copy and/or distribute it, +-# with or without modifications, as long as this notice is preserved. ++AC_SUBST($1)dnl ++]) + +-# serial 9 ++# GLIB_WITH_NLS ++#----------------- ++glib_DEFUN([GLIB_WITH_NLS], ++ dnl NLS is obligatory ++ [USE_NLS=yes ++ AC_SUBST(USE_NLS) + +-# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be +-# written in clear, in which case automake, when reading aclocal.m4, +-# will think it sees a *use*, and therefore will trigger all it's +-# C support machinery. Also note that it means that autoscan, seeing +-# CC etc. in the Makefile, will ask for an AC_PROG_CC use... ++ gt_cv_have_gettext=no + ++ CATOBJEXT=NONE ++ XGETTEXT=: ++ INTLLIBS= + +-# _AM_DEPENDENCIES(NAME) +-# ---------------------- +-# See how the compiler implements dependency checking. +-# NAME is "CC", "CXX", "GCJ", or "OBJC". +-# We try a few techniques and use that to set a single cache variable. +-# +-# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was +-# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular +-# dependency, and given that the user is not expected to run this macro, +-# just rely on AC_PROG_CC. +-AC_DEFUN([_AM_DEPENDENCIES], +-[AC_REQUIRE([AM_SET_DEPDIR])dnl +-AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl +-AC_REQUIRE([AM_MAKE_INCLUDE])dnl +-AC_REQUIRE([AM_DEP_TRACK])dnl +- +-ifelse([$1], CC, [depcc="$CC" am_compiler_list=], +- [$1], CXX, [depcc="$CXX" am_compiler_list=], +- [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'], +- [$1], UPC, [depcc="$UPC" am_compiler_list=], +- [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'], +- [depcc="$$1" am_compiler_list=]) +- +-AC_CACHE_CHECK([dependency style of $depcc], +- [am_cv_$1_dependencies_compiler_type], +-[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then +- # We make a subdir and do the tests there. Otherwise we can end up +- # making bogus files that we don't know about and never remove. For +- # instance it was reported that on HP-UX the gcc test will end up +- # making a dummy file named `D' -- because `-MD' means `put the output +- # in D'. +- mkdir conftest.dir +- # Copy depcomp to subdir because otherwise we won't find it if we're +- # using a relative directory. +- cp "$am_depcomp" conftest.dir +- cd conftest.dir +- # We will build objects and dependencies in a subdirectory because +- # it helps to detect inapplicable dependency modes. For instance +- # both Tru64's cc and ICC support -MD to output dependencies as a +- # side effect of compilation, but ICC will put the dependencies in +- # the current directory while Tru64 will put them in the object +- # directory. +- mkdir sub +- +- am_cv_$1_dependencies_compiler_type=none +- if test "$am_compiler_list" = ""; then +- am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` +- fi +- for depmode in $am_compiler_list; do +- # Setup a source with many dependencies, because some compilers +- # like to wrap large dependency lists on column 80 (with \), and +- # we should not choose a depcomp mode which is confused by this. +- # +- # We need to recreate these files for each test, as the compiler may +- # overwrite some of them when testing with obscure command lines. +- # This happens at least with the AIX C compiler. +- : > sub/conftest.c +- for i in 1 2 3 4 5 6; do +- echo '#include "conftst'$i'.h"' >> sub/conftest.c +- # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with +- # Solaris 8's {/usr,}/bin/sh. +- touch sub/conftst$i.h +- done +- echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf ++ AC_CHECK_HEADER(libintl.h, ++ [gt_cv_func_dgettext_libintl="no" ++ libintl_extra_libs="" + +- case $depmode in +- nosideeffect) +- # after this tag, mechanisms are not by side-effect, so they'll +- # only be used when explicitly requested +- if test "x$enable_dependency_tracking" = xyes; then +- continue +- else +- break ++ # ++ # First check in libc ++ # ++ AC_CACHE_CHECK([for ngettext in libc], gt_cv_func_ngettext_libc, ++ [AC_TRY_LINK([ ++#include ++], ++ [return !ngettext ("","", 1)], ++ gt_cv_func_ngettext_libc=yes, ++ gt_cv_func_ngettext_libc=no) ++ ]) ++ ++ if test "$gt_cv_func_ngettext_libc" = "yes" ; then ++ AC_CACHE_CHECK([for dgettext in libc], gt_cv_func_dgettext_libc, ++ [AC_TRY_LINK([ ++#include ++], ++ [return !dgettext ("","")], ++ gt_cv_func_dgettext_libc=yes, ++ gt_cv_func_dgettext_libc=no) ++ ]) + fi +- ;; +- none) break ;; +- esac +- # We check with `-c' and `-o' for the sake of the "dashmstdout" +- # mode. It turns out that the SunPro C++ compiler does not properly +- # handle `-M -o', and we need to detect this. +- if depmode=$depmode \ +- source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ +- depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ +- $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ +- >/dev/null 2>conftest.err && +- grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && +- grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && +- grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && +- ${MAKE-make} -s -f confmf > /dev/null 2>&1; then +- # icc doesn't choke on unknown options, it will just issue warnings +- # or remarks (even with -Werror). So we grep stderr for any message +- # that says an option was ignored or not supported. +- # When given -MP, icc 7.0 and 7.1 complain thusly: +- # icc: Command line warning: ignoring option '-M'; no argument required +- # The diagnosis changed in icc 8.0: +- # icc: Command line remark: option '-MP' not supported +- if (grep 'ignoring option' conftest.err || +- grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else +- am_cv_$1_dependencies_compiler_type=$depmode +- break ++ ++ if test "$gt_cv_func_ngettext_libc" = "yes" ; then ++ AC_CHECK_FUNCS(bind_textdomain_codeset) + fi +- fi +- done +- +- cd .. +- rm -rf conftest.dir +-else +- am_cv_$1_dependencies_compiler_type=none +-fi +-]) +-AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) +-AM_CONDITIONAL([am__fastdep$1], [ +- test "x$enable_dependency_tracking" != xno \ +- && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) +-]) +- +- +-# AM_SET_DEPDIR +-# ------------- +-# Choose a directory name for dependency files. +-# This macro is AC_REQUIREd in _AM_DEPENDENCIES +-AC_DEFUN([AM_SET_DEPDIR], +-[AC_REQUIRE([AM_SET_LEADING_DOT])dnl +-AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl +-]) +- + +-# AM_DEP_TRACK +-# ------------ +-AC_DEFUN([AM_DEP_TRACK], +-[AC_ARG_ENABLE(dependency-tracking, +-[ --disable-dependency-tracking speeds up one-time build +- --enable-dependency-tracking do not reject slow dependency extractors]) +-if test "x$enable_dependency_tracking" != xno; then +- am_depcomp="$ac_aux_dir/depcomp" +- AMDEPBACKSLASH='\' +-fi +-AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) +-AC_SUBST([AMDEPBACKSLASH])dnl +-_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl +-]) ++ # ++ # If we don't have everything we want, check in libintl ++ # ++ if test "$gt_cv_func_dgettext_libc" != "yes" \ ++ || test "$gt_cv_func_ngettext_libc" != "yes" \ ++ || test "$ac_cv_func_bind_textdomain_codeset" != "yes" ; then ++ ++ AC_CHECK_LIB(intl, bindtextdomain, ++ [AC_CHECK_LIB(intl, ngettext, ++ [AC_CHECK_LIB(intl, dgettext, ++ gt_cv_func_dgettext_libintl=yes)])]) + +-# Generate code to set up dependency tracking. -*- Autoconf -*- ++ if test "$gt_cv_func_dgettext_libintl" != "yes" ; then ++ AC_MSG_CHECKING([if -liconv is needed to use gettext]) ++ AC_MSG_RESULT([]) ++ AC_CHECK_LIB(intl, ngettext, ++ [AC_CHECK_LIB(intl, dcgettext, ++ [gt_cv_func_dgettext_libintl=yes ++ libintl_extra_libs=-liconv], ++ :,-liconv)], ++ :,-liconv) ++ fi + +-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005 +-# Free Software Foundation, Inc. +-# +-# This file is free software; the Free Software Foundation +-# gives unlimited permission to copy and/or distribute it, +-# with or without modifications, as long as this notice is preserved. ++ # ++ # If we found libintl, then check in it for bind_textdomain_codeset(); ++ # we'll prefer libc if neither have bind_textdomain_codeset(), ++ # and both have dgettext and ngettext ++ # ++ if test "$gt_cv_func_dgettext_libintl" = "yes" ; then ++ glib_save_LIBS="$LIBS" ++ LIBS="$LIBS -lintl $libintl_extra_libs" ++ unset ac_cv_func_bind_textdomain_codeset ++ AC_CHECK_FUNCS(bind_textdomain_codeset) ++ LIBS="$glib_save_LIBS" + +-#serial 3 ++ if test "$ac_cv_func_bind_textdomain_codeset" = "yes" ; then ++ gt_cv_func_dgettext_libc=no ++ else ++ if test "$gt_cv_func_dgettext_libc" = "yes" \ ++ && test "$gt_cv_func_ngettext_libc" = "yes"; then ++ gt_cv_func_dgettext_libintl=no ++ fi ++ fi ++ fi ++ fi + +-# _AM_OUTPUT_DEPENDENCY_COMMANDS +-# ------------------------------ +-AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], +-[for mf in $CONFIG_FILES; do +- # Strip MF so we end up with the name of the file. +- mf=`echo "$mf" | sed -e 's/:.*$//'` +- # Check whether this is an Automake generated Makefile or not. +- # We used to match only the files named `Makefile.in', but +- # some people rename them; so instead we look at the file content. +- # Grep'ing the first line is not enough: some people post-process +- # each Makefile.in and add a new line on top of each file to say so. +- # Grep'ing the whole file is not good either: AIX grep has a line +- # limit of 2048, but all sed's we know have understand at least 4000. +- if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then +- dirpart=`AS_DIRNAME("$mf")` +- else +- continue +- fi +- # Extract the definition of DEPDIR, am__include, and am__quote +- # from the Makefile without running `make'. +- DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` +- test -z "$DEPDIR" && continue +- am__include=`sed -n 's/^am__include = //p' < "$mf"` +- test -z "am__include" && continue +- am__quote=`sed -n 's/^am__quote = //p' < "$mf"` +- # When using ansi2knr, U may be empty or an underscore; expand it +- U=`sed -n 's/^U = //p' < "$mf"` +- # Find all dependency output files, they are included files with +- # $(DEPDIR) in their names. We invoke sed twice because it is the +- # simplest approach to changing $(DEPDIR) to its actual value in the +- # expansion. +- for file in `sed -n " +- s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ +- sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do +- # Make sure the directory exists. +- test -f "$dirpart/$file" && continue +- fdir=`AS_DIRNAME(["$file"])` +- AS_MKDIR_P([$dirpart/$fdir]) +- # echo "creating $dirpart/$file" +- echo '# dummy' > "$dirpart/$file" +- done +-done +-])# _AM_OUTPUT_DEPENDENCY_COMMANDS ++ if test "$gt_cv_func_dgettext_libc" = "yes" \ ++ || test "$gt_cv_func_dgettext_libintl" = "yes"; then ++ gt_cv_have_gettext=yes ++ fi ++ ++ if test "$gt_cv_func_dgettext_libintl" = "yes"; then ++ INTLLIBS="-lintl $libintl_extra_libs" ++ fi ++ ++ if test "$gt_cv_have_gettext" = "yes"; then ++ AC_DEFINE(HAVE_GETTEXT,1, ++ [Define if the GNU gettext() function is already present or preinstalled.]) ++ GLIB_PATH_PROG_WITH_TEST(MSGFMT, msgfmt, ++ [test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], no)dnl ++ if test "$MSGFMT" != "no"; then ++ glib_save_LIBS="$LIBS" ++ LIBS="$LIBS $INTLLIBS" ++ AC_CHECK_FUNCS(dcgettext) ++ MSGFMT_OPTS= ++ AC_MSG_CHECKING([if msgfmt accepts -c]) ++ GLIB_RUN_PROG([$MSGFMT -c -o /dev/null],[ ++msgid "" ++msgstr "" ++"Content-Type: text/plain; charset=UTF-8\n" ++"Project-Id-Version: test 1.0\n" ++"PO-Revision-Date: 2007-02-15 12:01+0100\n" ++"Last-Translator: test \n" ++"Language-Team: C \n" ++"MIME-Version: 1.0\n" ++"Content-Transfer-Encoding: 8bit\n" ++], [MSGFMT_OPTS=-c; AC_MSG_RESULT([yes])], [AC_MSG_RESULT([no])]) ++ AC_SUBST(MSGFMT_OPTS) ++ AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT) ++ GLIB_PATH_PROG_WITH_TEST(XGETTEXT, xgettext, ++ [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :) ++ AC_TRY_LINK(, [extern int _nl_msg_cat_cntr; ++ return _nl_msg_cat_cntr], ++ [CATOBJEXT=.gmo ++ DATADIRNAME=share], ++ [case $host in ++ *-*-solaris*) ++ dnl On Solaris, if bind_textdomain_codeset is in libc, ++ dnl GNU format message catalog is always supported, ++ dnl since both are added to the libc all together. ++ dnl Hence, we'd like to go with DATADIRNAME=share and ++ dnl and CATOBJEXT=.gmo in this case. ++ AC_CHECK_FUNC(bind_textdomain_codeset, ++ [CATOBJEXT=.gmo ++ DATADIRNAME=share], ++ [CATOBJEXT=.mo ++ DATADIRNAME=lib]) ++ ;; ++ *) ++ CATOBJEXT=.mo ++ DATADIRNAME=lib ++ ;; ++ esac]) ++ LIBS="$glib_save_LIBS" ++ INSTOBJEXT=.mo ++ else ++ gt_cv_have_gettext=no ++ fi ++ fi ++ ]) + ++ if test "$gt_cv_have_gettext" = "yes" ; then ++ AC_DEFINE(ENABLE_NLS, 1, ++ [always defined to indicate that i18n is enabled]) ++ fi + +-# AM_OUTPUT_DEPENDENCY_COMMANDS +-# ----------------------------- +-# This macro should only be invoked once -- use via AC_REQUIRE. +-# +-# This code is only required when automatic dependency tracking +-# is enabled. FIXME. This creates each `.P' file that we will +-# need in order to bootstrap the dependency handling code. +-AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], +-[AC_CONFIG_COMMANDS([depfiles], +- [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], +- [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) +-]) ++ dnl Test whether we really found GNU xgettext. ++ if test "$XGETTEXT" != ":"; then ++ dnl If it is not GNU xgettext we define it as : so that the ++ dnl Makefiles still can work. ++ if $XGETTEXT --omit-header /dev/null 2> /dev/null; then ++ : ; ++ else ++ AC_MSG_RESULT( ++ [found xgettext program is not GNU xgettext; ignore it]) ++ XGETTEXT=":" ++ fi ++ fi + +-# Do all the work for Automake. -*- Autoconf -*- ++ # We need to process the po/ directory. ++ POSUB=po + +-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, +-# 2005, 2006, 2008 Free Software Foundation, Inc. +-# +-# This file is free software; the Free Software Foundation +-# gives unlimited permission to copy and/or distribute it, +-# with or without modifications, as long as this notice is preserved. ++ AC_OUTPUT_COMMANDS( ++ [case "$CONFIG_FILES" in *po/Makefile.in*) ++ sed -e "/POTFILES =/r po/POTFILES" po/Makefile.in > po/Makefile ++ esac]) + +-# serial 13 ++ dnl These rules are solely for the distribution goal. While doing this ++ dnl we only have to keep exactly one list of the available catalogs ++ dnl in configure.in. ++ for lang in $ALL_LINGUAS; do ++ GMOFILES="$GMOFILES $lang.gmo" ++ POFILES="$POFILES $lang.po" ++ done + +-# This macro actually does too much. Some checks are only needed if +-# your package does certain things. But this isn't really a big deal. ++ dnl Make all variables we use known to autoconf. ++ AC_SUBST(CATALOGS) ++ AC_SUBST(CATOBJEXT) ++ AC_SUBST(DATADIRNAME) ++ AC_SUBST(GMOFILES) ++ AC_SUBST(INSTOBJEXT) ++ AC_SUBST(INTLLIBS) ++ AC_SUBST(PO_IN_DATADIR_TRUE) ++ AC_SUBST(PO_IN_DATADIR_FALSE) ++ AC_SUBST(POFILES) ++ AC_SUBST(POSUB) ++ ]) + +-# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) +-# AM_INIT_AUTOMAKE([OPTIONS]) +-# ----------------------------------------------- +-# The call with PACKAGE and VERSION arguments is the old style +-# call (pre autoconf-2.50), which is being phased out. PACKAGE +-# and VERSION should now be passed to AC_INIT and removed from +-# the call to AM_INIT_AUTOMAKE. +-# We support both call styles for the transition. After +-# the next Automake release, Autoconf can make the AC_INIT +-# arguments mandatory, and then we can depend on a new Autoconf +-# release and drop the old call support. +-AC_DEFUN([AM_INIT_AUTOMAKE], +-[AC_PREREQ([2.60])dnl +-dnl Autoconf wants to disallow AM_ names. We explicitly allow +-dnl the ones we care about. +-m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl +-AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl +-AC_REQUIRE([AC_PROG_INSTALL])dnl +-if test "`cd $srcdir && pwd`" != "`pwd`"; then +- # Use -I$(srcdir) only when $(srcdir) != ., so that make's output +- # is not polluted with repeated "-I." +- AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl +- # test to see if srcdir already configured +- if test -f $srcdir/config.status; then +- AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) +- fi +-fi ++# AM_GLIB_GNU_GETTEXT ++# ------------------- ++# Do checks necessary for use of gettext. If a suitable implementation ++# of gettext is found in either in libintl or in the C library, ++# it will set INTLLIBS to the libraries needed for use of gettext ++# and AC_DEFINE() HAVE_GETTEXT and ENABLE_NLS. (The shell variable ++# gt_cv_have_gettext will be set to "yes".) It will also call AC_SUBST() ++# on various variables needed by the Makefile.in.in installed by ++# glib-gettextize. ++dnl ++glib_DEFUN([GLIB_GNU_GETTEXT], ++ [AC_REQUIRE([AC_PROG_CC])dnl ++ AC_REQUIRE([AC_HEADER_STDC])dnl ++ ++ GLIB_LC_MESSAGES ++ GLIB_WITH_NLS + +-# test whether we have cygpath +-if test -z "$CYGPATH_W"; then +- if (cygpath --version) >/dev/null 2>/dev/null; then +- CYGPATH_W='cygpath -w' +- else +- CYGPATH_W=echo +- fi +-fi +-AC_SUBST([CYGPATH_W]) ++ if test "$gt_cv_have_gettext" = "yes"; then ++ if test "x$ALL_LINGUAS" = "x"; then ++ LINGUAS= ++ else ++ AC_MSG_CHECKING(for catalogs to be installed) ++ NEW_LINGUAS= ++ for presentlang in $ALL_LINGUAS; do ++ useit=no ++ if test "%UNSET%" != "${LINGUAS-%UNSET%}"; then ++ desiredlanguages="$LINGUAS" ++ else ++ desiredlanguages="$ALL_LINGUAS" ++ fi ++ for desiredlang in $desiredlanguages; do ++ # Use the presentlang catalog if desiredlang is ++ # a. equal to presentlang, or ++ # b. a variant of presentlang (because in this case, ++ # presentlang can be used as a fallback for messages ++ # which are not translated in the desiredlang catalog). ++ case "$desiredlang" in ++ "$presentlang"*) useit=yes;; ++ esac ++ done ++ if test $useit = yes; then ++ NEW_LINGUAS="$NEW_LINGUAS $presentlang" ++ fi ++ done ++ LINGUAS=$NEW_LINGUAS ++ AC_MSG_RESULT($LINGUAS) ++ fi + +-# Define the identity of the package. +-dnl Distinguish between old-style and new-style calls. +-m4_ifval([$2], +-[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl +- AC_SUBST([PACKAGE], [$1])dnl +- AC_SUBST([VERSION], [$2])], +-[_AM_SET_OPTIONS([$1])dnl +-dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT. +-m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,, +- [m4_fatal([AC_INIT should be called with package and version arguments])])dnl +- AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl +- AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl ++ dnl Construct list of names of catalog files to be constructed. ++ if test -n "$LINGUAS"; then ++ for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done ++ fi ++ fi + +-_AM_IF_OPTION([no-define],, +-[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) +- AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl ++ dnl If the AC_CONFIG_AUX_DIR macro for autoconf is used we possibly ++ dnl find the mkinstalldirs script in another subdir but ($top_srcdir). ++ dnl Try to locate is. ++ MKINSTALLDIRS= ++ if test -n "$ac_aux_dir"; then ++ MKINSTALLDIRS="$ac_aux_dir/mkinstalldirs" ++ fi ++ if test -z "$MKINSTALLDIRS"; then ++ MKINSTALLDIRS="\$(top_srcdir)/mkinstalldirs" ++ fi ++ AC_SUBST(MKINSTALLDIRS) + +-# Some tools Automake needs. +-AC_REQUIRE([AM_SANITY_CHECK])dnl +-AC_REQUIRE([AC_ARG_PROGRAM])dnl +-AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}) +-AM_MISSING_PROG(AUTOCONF, autoconf) +-AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) +-AM_MISSING_PROG(AUTOHEADER, autoheader) +-AM_MISSING_PROG(MAKEINFO, makeinfo) +-AM_PROG_INSTALL_SH +-AM_PROG_INSTALL_STRIP +-AC_REQUIRE([AM_PROG_MKDIR_P])dnl +-# We need awk for the "check" target. The system "awk" is bad on +-# some platforms. +-AC_REQUIRE([AC_PROG_AWK])dnl +-AC_REQUIRE([AC_PROG_MAKE_SET])dnl +-AC_REQUIRE([AM_SET_LEADING_DOT])dnl +-_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], +- [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], +- [_AM_PROG_TAR([v7])])]) +-_AM_IF_OPTION([no-dependencies],, +-[AC_PROVIDE_IFELSE([AC_PROG_CC], +- [_AM_DEPENDENCIES(CC)], +- [define([AC_PROG_CC], +- defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl +-AC_PROVIDE_IFELSE([AC_PROG_CXX], +- [_AM_DEPENDENCIES(CXX)], +- [define([AC_PROG_CXX], +- defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl +-AC_PROVIDE_IFELSE([AC_PROG_OBJC], +- [_AM_DEPENDENCIES(OBJC)], +- [define([AC_PROG_OBJC], +- defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl +-]) +-]) ++ dnl Generate list of files to be processed by xgettext which will ++ dnl be included in po/Makefile. ++ test -d po || mkdir po ++ if test "x$srcdir" != "x."; then ++ if test "x`echo $srcdir | sed 's@/.*@@'`" = "x"; then ++ posrcprefix="$srcdir/" ++ else ++ posrcprefix="../$srcdir/" ++ fi ++ else ++ posrcprefix="../" ++ fi ++ rm -f po/POTFILES ++ sed -e "/^#/d" -e "/^\$/d" -e "s,.*, $posrcprefix& \\\\," -e "\$s/\(.*\) \\\\/\1/" \ ++ < $srcdir/po/POTFILES.in > po/POTFILES ++ ]) + ++# AM_GLIB_DEFINE_LOCALEDIR(VARIABLE) ++# ------------------------------- ++# Define VARIABLE to the location where catalog files will ++# be installed by po/Makefile. ++glib_DEFUN([GLIB_DEFINE_LOCALEDIR], ++[glib_REQUIRE([GLIB_GNU_GETTEXT])dnl ++glib_save_prefix="$prefix" ++glib_save_exec_prefix="$exec_prefix" ++glib_save_datarootdir="$datarootdir" ++test "x$prefix" = xNONE && prefix=$ac_default_prefix ++test "x$exec_prefix" = xNONE && exec_prefix=$prefix ++datarootdir=`eval echo "${datarootdir}"` ++if test "x$CATOBJEXT" = "x.mo" ; then ++ localedir=`eval echo "${libdir}/locale"` ++else ++ localedir=`eval echo "${datadir}/locale"` ++fi ++prefix="$glib_save_prefix" ++exec_prefix="$glib_save_exec_prefix" ++datarootdir="$glib_save_datarootdir" ++AC_DEFINE_UNQUOTED($1, "$localedir", ++ [Define the location where the catalogs will be installed]) ++]) + +-# When config.status generates a header, we must update the stamp-h file. +-# This file resides in the same directory as the config header +-# that is generated. The stamp files are numbered to have different names. ++dnl ++dnl Now the definitions that aclocal will find ++dnl ++ifdef(glib_configure_in,[],[ ++AC_DEFUN([AM_GLIB_GNU_GETTEXT],[GLIB_GNU_GETTEXT($@)]) ++AC_DEFUN([AM_GLIB_DEFINE_LOCALEDIR],[GLIB_DEFINE_LOCALEDIR($@)]) ++])dnl + +-# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the +-# loop where config.status creates the headers, so we can generate +-# our stamp files there. +-AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], +-[# Compute $1's index in $config_headers. +-_am_arg=$1 +-_am_stamp_count=1 +-for _am_header in $config_headers :; do +- case $_am_header in +- $_am_arg | $_am_arg:* ) +- break ;; +- * ) +- _am_stamp_count=`expr $_am_stamp_count + 1` ;; +- esac +-done +-echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) ++# GLIB_RUN_PROG(PROGRAM, TEST-FILE, [ACTION-IF-PASS], [ACTION-IF-FAIL]) ++# ++# Create a temporary file with TEST-FILE as its contents and pass the ++# file name to PROGRAM. Perform ACTION-IF-PASS if PROGRAM exits with ++# 0 and perform ACTION-IF-FAIL for any other exit status. ++AC_DEFUN([GLIB_RUN_PROG], ++[cat >conftest.foo <<_ACEOF ++$2 ++_ACEOF ++if AC_RUN_LOG([$1 conftest.foo]); then ++ m4_ifval([$3], [$3], [:]) ++m4_ifvaln([$4], [else $4])dnl ++echo "$as_me: failed input was:" >&AS_MESSAGE_LOG_FD ++sed 's/^/| /' conftest.foo >&AS_MESSAGE_LOG_FD ++fi]) + +-# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. +-# +-# This file is free software; the Free Software Foundation +-# gives unlimited permission to copy and/or distribute it, +-# with or without modifications, as long as this notice is preserved. + +-# AM_PROG_INSTALL_SH +-# ------------------ +-# Define $install_sh. +-AC_DEFUN([AM_PROG_INSTALL_SH], +-[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +-install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"} +-AC_SUBST(install_sh)]) ++# gnome-common.m4 ++# + +-# Copyright (C) 2003, 2005 Free Software Foundation, Inc. +-# +-# This file is free software; the Free Software Foundation +-# gives unlimited permission to copy and/or distribute it, +-# with or without modifications, as long as this notice is preserved. ++dnl GNOME_COMMON_INIT + +-# serial 2 ++AC_DEFUN([GNOME_COMMON_INIT], ++[ ++ dnl this macro should come after AC_CONFIG_MACRO_DIR ++ AC_BEFORE([AC_CONFIG_MACRO_DIR], [$0]) + +-# Check whether the underlying file-system supports filenames +-# with a leading dot. For instance MS-DOS doesn't. +-AC_DEFUN([AM_SET_LEADING_DOT], +-[rm -rf .tst 2>/dev/null +-mkdir .tst 2>/dev/null +-if test -d .tst; then +- am__leading_dot=. +-else +- am__leading_dot=_ +-fi +-rmdir .tst 2>/dev/null +-AC_SUBST([am__leading_dot])]) ++ dnl ensure that when the Automake generated makefile calls aclocal, ++ dnl it honours the $ACLOCAL_FLAGS environment variable ++ ACLOCAL_AMFLAGS="\${ACLOCAL_FLAGS}" ++ if test -n "$ac_macro_dir"; then ++ ACLOCAL_AMFLAGS="-I $ac_macro_dir $ACLOCAL_AMFLAGS" ++ fi + +-# Add --enable-maintainer-mode option to configure. -*- Autoconf -*- +-# From Jim Meyering ++ AC_SUBST([ACLOCAL_AMFLAGS]) ++]) + +-# Copyright (C) 1996, 1998, 2000, 2001, 2002, 2003, 2004, 2005 +-# Free Software Foundation, Inc. +-# +-# This file is free software; the Free Software Foundation +-# gives unlimited permission to copy and/or distribute it, +-# with or without modifications, as long as this notice is preserved. ++AC_DEFUN([GNOME_DEBUG_CHECK], ++[ ++ AC_ARG_ENABLE([debug], ++ AC_HELP_STRING([--enable-debug], ++ [turn on debugging]),, ++ [enable_debug=no]) + +-# serial 4 ++ if test x$enable_debug = xyes ; then ++ AC_DEFINE(GNOME_ENABLE_DEBUG, 1, ++ [Enable additional debugging at the expense of performance and size]) ++ fi ++]) + +-AC_DEFUN([AM_MAINTAINER_MODE], +-[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles]) +- dnl maintainer-mode is disabled by default +- AC_ARG_ENABLE(maintainer-mode, +-[ --enable-maintainer-mode enable make rules and dependencies not useful +- (and sometimes confusing) to the casual installer], +- USE_MAINTAINER_MODE=$enableval, +- USE_MAINTAINER_MODE=no) +- AC_MSG_RESULT([$USE_MAINTAINER_MODE]) +- AM_CONDITIONAL(MAINTAINER_MODE, [test $USE_MAINTAINER_MODE = yes]) +- MAINT=$MAINTAINER_MODE_TRUE +- AC_SUBST(MAINT)dnl +-] +-) ++dnl GNOME_MAINTAINER_MODE_DEFINES () ++dnl define DISABLE_DEPRECATED ++dnl ++AC_DEFUN([GNOME_MAINTAINER_MODE_DEFINES], ++[ ++ AC_REQUIRE([AM_MAINTAINER_MODE]) + +-AU_DEFUN([jm_MAINTAINER_MODE], [AM_MAINTAINER_MODE]) ++ if test $USE_MAINTAINER_MODE = yes; then ++ DISABLE_DEPRECATED="-DG_DISABLE_DEPRECATED -DGDK_DISABLE_DEPRECATED -DGDK_PIXBUF_DISABLE_DEPRECATED -DPANGO_DISABLE_DEPRECATED -DGTK_DISABLE_DEPRECATED -DGCONF_DISABLE_DEPRECATED -DBONOBO_DISABLE_DEPRECATED -DBONOBO_UI_DISABLE_DEPRECATED -DGNOME_VFS_DISABLE_DEPRECATED -DGNOME_DISABLE_DEPRECATED -DLIBGLADE_DISABLE_DEPRECATED" ++ else ++ DISABLE_DEPRECATED="" ++ fi ++ AC_SUBST(DISABLE_DEPRECATED) ++]) + +-# Check to see how 'make' treats includes. -*- Autoconf -*- ++dnl GNOME_COMPILE_WARNINGS ++dnl Turn on many useful compiler warnings ++dnl For now, only works on GCC ++AC_DEFUN([GNOME_COMPILE_WARNINGS],[ ++ dnl ****************************** ++ dnl More compiler warnings ++ dnl ****************************** + +-# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc. +-# +-# This file is free software; the Free Software Foundation +-# gives unlimited permission to copy and/or distribute it, +-# with or without modifications, as long as this notice is preserved. ++ AC_ARG_ENABLE(compile-warnings, ++ AC_HELP_STRING([--enable-compile-warnings=@<:@no/minimum/yes/maximum/error@:>@], ++ [Turn on compiler warnings]),, ++ [enable_compile_warnings="m4_default([$1],[yes])"]) + +-# serial 3 ++ warnCFLAGS= ++ if test "x$GCC" != xyes; then ++ enable_compile_warnings=no ++ fi + +-# AM_MAKE_INCLUDE() +-# ----------------- +-# Check to see how make treats includes. +-AC_DEFUN([AM_MAKE_INCLUDE], +-[am_make=${MAKE-make} +-cat > confinc << 'END' +-am__doit: +- @echo done +-.PHONY: am__doit +-END +-# If we don't find an include directive, just comment out the code. +-AC_MSG_CHECKING([for style of include used by $am_make]) +-am__include="#" +-am__quote= +-_am_result=none +-# First try GNU make style include. +-echo "include confinc" > confmf +-# We grep out `Entering directory' and `Leaving directory' +-# messages which can occur if `w' ends up in MAKEFLAGS. +-# In particular we don't look at `^make:' because GNU make might +-# be invoked under some other name (usually "gmake"), in which +-# case it prints its new name instead of `make'. +-if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then +- am__include=include +- am__quote= +- _am_result=GNU +-fi +-# Now try BSD make style include. +-if test "$am__include" = "#"; then +- echo '.include "confinc"' > confmf +- if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then +- am__include=.include +- am__quote="\"" +- _am_result=BSD +- fi +-fi +-AC_SUBST([am__include]) +-AC_SUBST([am__quote]) +-AC_MSG_RESULT([$_am_result]) +-rm -f confinc confmf +-]) ++ warning_flags= ++ realsave_CFLAGS="$CFLAGS" + +-# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- +- +-# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005 +-# Free Software Foundation, Inc. +-# +-# This file is free software; the Free Software Foundation +-# gives unlimited permission to copy and/or distribute it, +-# with or without modifications, as long as this notice is preserved. +- +-# serial 5 ++ case "$enable_compile_warnings" in ++ no) ++ warning_flags= ++ ;; ++ minimum) ++ warning_flags="-Wall" ++ ;; ++ yes) ++ warning_flags="-Wall -Wmissing-prototypes" ++ ;; ++ maximum|error) ++ warning_flags="-Wall -Wmissing-prototypes -Wnested-externs -Wpointer-arith" ++ CFLAGS="$warning_flags $CFLAGS" ++ for option in -Wno-sign-compare; do ++ SAVE_CFLAGS="$CFLAGS" ++ CFLAGS="$CFLAGS $option" ++ AC_MSG_CHECKING([whether gcc understands $option]) ++ AC_TRY_COMPILE([], [], ++ has_option=yes, ++ has_option=no,) ++ CFLAGS="$SAVE_CFLAGS" ++ AC_MSG_RESULT($has_option) ++ if test $has_option = yes; then ++ warning_flags="$warning_flags $option" ++ fi ++ unset has_option ++ unset SAVE_CFLAGS ++ done ++ unset option ++ if test "$enable_compile_warnings" = "error" ; then ++ warning_flags="$warning_flags -Werror" ++ fi ++ ;; ++ *) ++ AC_MSG_ERROR(Unknown argument '$enable_compile_warnings' to --enable-compile-warnings) ++ ;; ++ esac ++ CFLAGS="$realsave_CFLAGS" ++ AC_MSG_CHECKING(what warning flags to pass to the C compiler) ++ AC_MSG_RESULT($warning_flags) + +-# AM_MISSING_PROG(NAME, PROGRAM) +-# ------------------------------ +-AC_DEFUN([AM_MISSING_PROG], +-[AC_REQUIRE([AM_MISSING_HAS_RUN]) +-$1=${$1-"${am_missing_run}$2"} +-AC_SUBST($1)]) ++ AC_ARG_ENABLE(iso-c, ++ AC_HELP_STRING([--enable-iso-c], ++ [Try to warn if code is not ISO C ]),, ++ [enable_iso_c=no]) + ++ AC_MSG_CHECKING(what language compliance flags to pass to the C compiler) ++ complCFLAGS= ++ if test "x$enable_iso_c" != "xno"; then ++ if test "x$GCC" = "xyes"; then ++ case " $CFLAGS " in ++ *[\ \ ]-ansi[\ \ ]*) ;; ++ *) complCFLAGS="$complCFLAGS -ansi" ;; ++ esac ++ case " $CFLAGS " in ++ *[\ \ ]-pedantic[\ \ ]*) ;; ++ *) complCFLAGS="$complCFLAGS -pedantic" ;; ++ esac ++ fi ++ fi ++ AC_MSG_RESULT($complCFLAGS) + +-# AM_MISSING_HAS_RUN +-# ------------------ +-# Define MISSING if not defined so far and test if it supports --run. +-# If it does, set am_missing_run to use it, otherwise, to nothing. +-AC_DEFUN([AM_MISSING_HAS_RUN], +-[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +-AC_REQUIRE_AUX_FILE([missing])dnl +-test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" +-# Use eval to expand $SHELL +-if eval "$MISSING --run true"; then +- am_missing_run="$MISSING --run " +-else +- am_missing_run= +- AC_MSG_WARN([`missing' script is too old or missing]) +-fi ++ WARN_CFLAGS="$warning_flags $complCFLAGS" ++ AC_SUBST(WARN_CFLAGS) + ]) + +-# Copyright (C) 2003, 2004, 2005, 2006 Free Software Foundation, Inc. +-# +-# This file is free software; the Free Software Foundation +-# gives unlimited permission to copy and/or distribute it, +-# with or without modifications, as long as this notice is preserved. ++dnl For C++, do basically the same thing. + +-# AM_PROG_MKDIR_P +-# --------------- +-# Check for `mkdir -p'. +-AC_DEFUN([AM_PROG_MKDIR_P], +-[AC_PREREQ([2.60])dnl +-AC_REQUIRE([AC_PROG_MKDIR_P])dnl +-dnl Automake 1.8 to 1.9.6 used to define mkdir_p. We now use MKDIR_P, +-dnl while keeping a definition of mkdir_p for backward compatibility. +-dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile. +-dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of +-dnl Makefile.ins that do not define MKDIR_P, so we do our own +-dnl adjustment using top_builddir (which is defined more often than +-dnl MKDIR_P). +-AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl +-case $mkdir_p in +- [[\\/$]]* | ?:[[\\/]]*) ;; +- */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; +-esac +-]) ++AC_DEFUN([GNOME_CXX_WARNINGS],[ ++ AC_ARG_ENABLE(cxx-warnings, ++ AC_HELP_STRING([--enable-cxx-warnings=@<:@no/minimum/yes@:>@] ++ [Turn on compiler warnings.]),, ++ [enable_cxx_warnings="m4_default([$1],[minimum])"]) + +-# Helper functions for option handling. -*- Autoconf -*- ++ AC_MSG_CHECKING(what warning flags to pass to the C++ compiler) ++ warnCXXFLAGS= ++ if test "x$GXX" != xyes; then ++ enable_cxx_warnings=no ++ fi ++ if test "x$enable_cxx_warnings" != "xno"; then ++ if test "x$GXX" = "xyes"; then ++ case " $CXXFLAGS " in ++ *[\ \ ]-Wall[\ \ ]*) ;; ++ *) warnCXXFLAGS="-Wall -Wno-unused" ;; ++ esac + +-# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc. +-# +-# This file is free software; the Free Software Foundation +-# gives unlimited permission to copy and/or distribute it, +-# with or without modifications, as long as this notice is preserved. ++ ## -W is not all that useful. And it cannot be controlled ++ ## with individual -Wno-xxx flags, unlike -Wall ++ if test "x$enable_cxx_warnings" = "xyes"; then ++ warnCXXFLAGS="$warnCXXFLAGS -Wshadow -Woverloaded-virtual" ++ fi ++ fi ++ fi ++ AC_MSG_RESULT($warnCXXFLAGS) + +-# serial 3 ++ AC_ARG_ENABLE(iso-cxx, ++ AC_HELP_STRING([--enable-iso-cxx], ++ [Try to warn if code is not ISO C++ ]),, ++ [enable_iso_cxx=no]) + +-# _AM_MANGLE_OPTION(NAME) +-# ----------------------- +-AC_DEFUN([_AM_MANGLE_OPTION], +-[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) ++ AC_MSG_CHECKING(what language compliance flags to pass to the C++ compiler) ++ complCXXFLAGS= ++ if test "x$enable_iso_cxx" != "xno"; then ++ if test "x$GXX" = "xyes"; then ++ case " $CXXFLAGS " in ++ *[\ \ ]-ansi[\ \ ]*) ;; ++ *) complCXXFLAGS="$complCXXFLAGS -ansi" ;; ++ esac + +-# _AM_SET_OPTION(NAME) +-# ------------------------------ +-# Set option NAME. Presently that only means defining a flag for this option. +-AC_DEFUN([_AM_SET_OPTION], +-[m4_define(_AM_MANGLE_OPTION([$1]), 1)]) ++ case " $CXXFLAGS " in ++ *[\ \ ]-pedantic[\ \ ]*) ;; ++ *) complCXXFLAGS="$complCXXFLAGS -pedantic" ;; ++ esac ++ fi ++ fi ++ AC_MSG_RESULT($complCXXFLAGS) + +-# _AM_SET_OPTIONS(OPTIONS) +-# ---------------------------------- +-# OPTIONS is a space-separated list of Automake options. +-AC_DEFUN([_AM_SET_OPTIONS], +-[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) ++ WARN_CXXFLAGS="$CXXFLAGS $warnCXXFLAGS $complCXXFLAGS" ++ AC_SUBST(WARN_CXXFLAGS) ++]) + +-# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) +-# ------------------------------------------- +-# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. +-AC_DEFUN([_AM_IF_OPTION], +-[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) + +-# Check to make sure that the build environment is sane. -*- Autoconf -*- ++dnl IT_PROG_INTLTOOL([MINIMUM-VERSION], [no-xml]) ++# serial 40 IT_PROG_INTLTOOL ++AC_DEFUN([IT_PROG_INTLTOOL], [ ++AC_PREREQ([2.50])dnl ++AC_REQUIRE([AM_NLS])dnl + +-# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005 +-# Free Software Foundation, Inc. +-# +-# This file is free software; the Free Software Foundation +-# gives unlimited permission to copy and/or distribute it, +-# with or without modifications, as long as this notice is preserved. ++case "$am__api_version" in ++ 1.[01234]) ++ AC_MSG_ERROR([Automake 1.5 or newer is required to use intltool]) ++ ;; ++ *) ++ ;; ++esac + +-# serial 4 ++if test -n "$1"; then ++ AC_MSG_CHECKING([for intltool >= $1]) + +-# AM_SANITY_CHECK +-# --------------- +-AC_DEFUN([AM_SANITY_CHECK], +-[AC_MSG_CHECKING([whether build environment is sane]) +-# Just in case +-sleep 1 +-echo timestamp > conftest.file +-# Do `set' in a subshell so we don't clobber the current shell's +-# arguments. Must try -L first in case configure is actually a +-# symlink; some systems play weird games with the mod time of symlinks +-# (eg FreeBSD returns the mod time of the symlink's containing +-# directory). +-if ( +- set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` +- if test "$[*]" = "X"; then +- # -L didn't work. +- set X `ls -t $srcdir/configure conftest.file` +- fi +- rm -f conftest.file +- if test "$[*]" != "X $srcdir/configure conftest.file" \ +- && test "$[*]" != "X conftest.file $srcdir/configure"; then ++ INTLTOOL_REQUIRED_VERSION_AS_INT=`echo $1 | awk -F. '{ print $ 1 * 1000 + $ 2 * 100 + $ 3; }'` ++ INTLTOOL_APPLIED_VERSION=`intltool-update --version | head -1 | cut -d" " -f3` ++ [INTLTOOL_APPLIED_VERSION_AS_INT=`echo $INTLTOOL_APPLIED_VERSION | awk -F. '{ print $ 1 * 1000 + $ 2 * 100 + $ 3; }'` ++ ] ++ AC_MSG_RESULT([$INTLTOOL_APPLIED_VERSION found]) ++ test "$INTLTOOL_APPLIED_VERSION_AS_INT" -ge "$INTLTOOL_REQUIRED_VERSION_AS_INT" || ++ AC_MSG_ERROR([Your intltool is too old. You need intltool $1 or later.]) ++fi + +- # If neither matched, then we have a broken ls. This can happen +- # if, for instance, CONFIG_SHELL is bash and it inherits a +- # broken ls alias from the environment. This has actually +- # happened. Such a system could not be considered "sane". +- AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken +-alias in your environment]) +- fi ++AC_PATH_PROG(INTLTOOL_UPDATE, [intltool-update]) ++AC_PATH_PROG(INTLTOOL_MERGE, [intltool-merge]) ++AC_PATH_PROG(INTLTOOL_EXTRACT, [intltool-extract]) ++if test -z "$INTLTOOL_UPDATE" -o -z "$INTLTOOL_MERGE" -o -z "$INTLTOOL_EXTRACT"; then ++ AC_MSG_ERROR([The intltool scripts were not found. Please install intltool.]) ++fi + +- test "$[2]" = conftest.file +- ) +-then +- # Ok. +- : +-else +- AC_MSG_ERROR([newly created file is older than distributed files! +-Check your system clock]) ++ INTLTOOL_DESKTOP_RULE='%.desktop: %.desktop.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' ++INTLTOOL_DIRECTORY_RULE='%.directory: %.directory.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' ++ INTLTOOL_KEYS_RULE='%.keys: %.keys.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -k -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' ++ INTLTOOL_PROP_RULE='%.prop: %.prop.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' ++ INTLTOOL_OAF_RULE='%.oaf: %.oaf.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -o -p $(top_srcdir)/po $< [$]@' ++ INTLTOOL_PONG_RULE='%.pong: %.pong.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' ++ INTLTOOL_SERVER_RULE='%.server: %.server.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -o -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' ++ INTLTOOL_SHEET_RULE='%.sheet: %.sheet.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' ++INTLTOOL_SOUNDLIST_RULE='%.soundlist: %.soundlist.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' ++ INTLTOOL_UI_RULE='%.ui: %.ui.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' ++ INTLTOOL_XML_RULE='%.xml: %.xml.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' ++ INTLTOOL_XML_NOMERGE_RULE='%.xml: %.xml.in $(INTLTOOL_MERGE) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u /tmp $< [$]@' ++ INTLTOOL_XAM_RULE='%.xam: %.xml.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' ++ INTLTOOL_KBD_RULE='%.kbd: %.kbd.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -m -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' ++ INTLTOOL_CAVES_RULE='%.caves: %.caves.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' ++ INTLTOOL_SCHEMAS_RULE='%.schemas: %.schemas.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -s -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' ++ INTLTOOL_THEME_RULE='%.theme: %.theme.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' ++ INTLTOOL_SERVICE_RULE='%.service: %.service.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' ++ INTLTOOL_POLICY_RULE='%.policy: %.policy.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' ++ ++AC_SUBST(INTLTOOL_DESKTOP_RULE) ++AC_SUBST(INTLTOOL_DIRECTORY_RULE) ++AC_SUBST(INTLTOOL_KEYS_RULE) ++AC_SUBST(INTLTOOL_PROP_RULE) ++AC_SUBST(INTLTOOL_OAF_RULE) ++AC_SUBST(INTLTOOL_PONG_RULE) ++AC_SUBST(INTLTOOL_SERVER_RULE) ++AC_SUBST(INTLTOOL_SHEET_RULE) ++AC_SUBST(INTLTOOL_SOUNDLIST_RULE) ++AC_SUBST(INTLTOOL_UI_RULE) ++AC_SUBST(INTLTOOL_XAM_RULE) ++AC_SUBST(INTLTOOL_KBD_RULE) ++AC_SUBST(INTLTOOL_XML_RULE) ++AC_SUBST(INTLTOOL_XML_NOMERGE_RULE) ++AC_SUBST(INTLTOOL_CAVES_RULE) ++AC_SUBST(INTLTOOL_SCHEMAS_RULE) ++AC_SUBST(INTLTOOL_THEME_RULE) ++AC_SUBST(INTLTOOL_SERVICE_RULE) ++AC_SUBST(INTLTOOL_POLICY_RULE) ++ ++# Check the gettext tools to make sure they are GNU ++AC_PATH_PROG(XGETTEXT, xgettext) ++AC_PATH_PROG(MSGMERGE, msgmerge) ++AC_PATH_PROG(MSGFMT, msgfmt) ++AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT) ++if test -z "$XGETTEXT" -o -z "$MSGMERGE" -o -z "$MSGFMT"; then ++ AC_MSG_ERROR([GNU gettext tools not found; required for intltool]) ++fi ++xgversion="`$XGETTEXT --version|grep '(GNU ' 2> /dev/null`" ++mmversion="`$MSGMERGE --version|grep '(GNU ' 2> /dev/null`" ++mfversion="`$MSGFMT --version|grep '(GNU ' 2> /dev/null`" ++if test -z "$xgversion" -o -z "$mmversion" -o -z "$mfversion"; then ++ AC_MSG_ERROR([GNU gettext tools not found; required for intltool]) + fi +-AC_MSG_RESULT(yes)]) + +-# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. +-# +-# This file is free software; the Free Software Foundation +-# gives unlimited permission to copy and/or distribute it, +-# with or without modifications, as long as this notice is preserved. ++AC_PATH_PROG(INTLTOOL_PERL, [perl]) ++if test -z "$INTLTOOL_PERL"; then ++ AC_MSG_ERROR([perl not found; required for intltool]) ++fi ++if test -z "`$INTLTOOL_PERL -v | fgrep '5.' 2> /dev/null`"; then ++ AC_MSG_ERROR([perl 5.x required for intltool]) ++fi ++if test "x$2" != "xno-xml"; then ++ AC_MSG_CHECKING([for XML::Parser]) ++ if `$INTLTOOL_PERL -e "require XML::Parser" 2>/dev/null`; then ++ AC_MSG_RESULT([ok]) ++ else ++ AC_MSG_ERROR([XML::Parser perl module is required for intltool]) ++ fi ++fi + +-# AM_PROG_INSTALL_STRIP +-# --------------------- +-# One issue with vendor `install' (even GNU) is that you can't +-# specify the program used to strip binaries. This is especially +-# annoying in cross-compiling environments, where the build's strip +-# is unlikely to handle the host's binaries. +-# Fortunately install-sh will honor a STRIPPROG variable, so we +-# always use install-sh in `make install-strip', and initialize +-# STRIPPROG with the value of the STRIP variable (set by the user). +-AC_DEFUN([AM_PROG_INSTALL_STRIP], +-[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl +-# Installed binaries are usually stripped using `strip' when the user +-# run `make install-strip'. However `strip' might not be the right +-# tool to use in cross-compilation environments, therefore Automake +-# will honor the `STRIP' environment variable to overrule this program. +-dnl Don't test for $cross_compiling = yes, because it might be `maybe'. +-if test "$cross_compiling" != no; then +- AC_CHECK_TOOL([STRIP], [strip], :) ++# Substitute ALL_LINGUAS so we can use it in po/Makefile ++AC_SUBST(ALL_LINGUAS) ++ ++# Set DATADIRNAME correctly if it is not set yet ++# (copied from glib-gettext.m4) ++if test -z "$DATADIRNAME"; then ++ AC_LINK_IFELSE( ++ [AC_LANG_PROGRAM([[]], ++ [[extern int _nl_msg_cat_cntr; ++ return _nl_msg_cat_cntr]])], ++ [DATADIRNAME=share], ++ [case $host in ++ *-*-solaris*) ++ dnl On Solaris, if bind_textdomain_codeset is in libc, ++ dnl GNU format message catalog is always supported, ++ dnl since both are added to the libc all together. ++ dnl Hence, we'd like to go with DATADIRNAME=share ++ dnl in this case. ++ AC_CHECK_FUNC(bind_textdomain_codeset, ++ [DATADIRNAME=share], [DATADIRNAME=lib]) ++ ;; ++ *) ++ [DATADIRNAME=lib] ++ ;; ++ esac]) + fi +-INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" +-AC_SUBST([INSTALL_STRIP_PROGRAM])]) ++AC_SUBST(DATADIRNAME) + +-# Copyright (C) 2006 Free Software Foundation, Inc. +-# +-# This file is free software; the Free Software Foundation +-# gives unlimited permission to copy and/or distribute it, +-# with or without modifications, as long as this notice is preserved. ++IT_PO_SUBDIR([po]) + +-# _AM_SUBST_NOTMAKE(VARIABLE) +-# --------------------------- +-# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in. +-# This macro is traced by Automake. +-AC_DEFUN([_AM_SUBST_NOTMAKE]) ++]) + +-# Check how to create a tarball. -*- Autoconf -*- + +-# Copyright (C) 2004, 2005 Free Software Foundation, Inc. ++# IT_PO_SUBDIR(DIRNAME) ++# --------------------- ++# All po subdirs have to be declared with this macro; the subdir "po" is ++# declared by IT_PROG_INTLTOOL. + # +-# This file is free software; the Free Software Foundation +-# gives unlimited permission to copy and/or distribute it, +-# with or without modifications, as long as this notice is preserved. ++AC_DEFUN([IT_PO_SUBDIR], ++[AC_PREREQ([2.53])dnl We use ac_top_srcdir inside AC_CONFIG_COMMANDS. ++dnl ++dnl The following CONFIG_COMMANDS should be exetuted at the very end ++dnl of config.status. ++AC_CONFIG_COMMANDS_PRE([ ++ AC_CONFIG_COMMANDS([$1/stamp-it], [ ++ if [ ! grep "^# INTLTOOL_MAKEFILE$" "$1/Makefile.in" ]; then ++ AC_MSG_ERROR([$1/Makefile.in.in was not created by intltoolize.]) ++ fi ++ rm -f "$1/stamp-it" "$1/stamp-it.tmp" "$1/POTFILES" "$1/Makefile.tmp" ++ >"$1/stamp-it.tmp" ++ [sed '/^#/d ++ s/^[[].*] *// ++ /^[ ]*$/d ++ '"s|^| $ac_top_srcdir/|" \ ++ "$srcdir/$1/POTFILES.in" | sed '$!s/$/ \\/' >"$1/POTFILES" ++ ] ++ [sed '/^POTFILES =/,/[^\\]$/ { ++ /^POTFILES =/!d ++ r $1/POTFILES ++ } ++ ' "$1/Makefile.in" >"$1/Makefile"] ++ rm -f "$1/Makefile.tmp" ++ mv "$1/stamp-it.tmp" "$1/stamp-it" ++ ]) ++])dnl ++]) + +-# serial 2 ++# deprecated macros ++AU_ALIAS([AC_PROG_INTLTOOL], [IT_PROG_INTLTOOL]) ++# A hint is needed for aclocal from Automake <= 1.9.4: ++# AC_DEFUN([AC_PROG_INTLTOOL], ...) + +-# _AM_PROG_TAR(FORMAT) +-# -------------------- +-# Check how to create a tarball in format FORMAT. +-# FORMAT should be one of `v7', `ustar', or `pax'. ++ ++# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*- + # +-# Substitute a variable $(am__tar) that is a command +-# writing to stdout a FORMAT-tarball containing the directory +-# $tardir. +-# tardir=directory && $(am__tar) > result.tar ++# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, ++# 2006, 2007, 2008 Free Software Foundation, Inc. ++# Written by Gordon Matzigkeit, 1996 ++# ++# This file is free software; the Free Software Foundation gives ++# unlimited permission to copy and/or distribute it, with or without ++# modifications, as long as this notice is preserved. ++ ++m4_define([_LT_COPYING], [dnl ++# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, ++# 2006, 2007, 2008 Free Software Foundation, Inc. ++# Written by Gordon Matzigkeit, 1996 ++# ++# This file is part of GNU Libtool. ++# ++# GNU Libtool is free software; you can redistribute it and/or ++# modify it under the terms of the GNU General Public License as ++# published by the Free Software Foundation; either version 2 of ++# the License, or (at your option) any later version. ++# ++# As a special exception to the GNU General Public License, ++# if you distribute this file as part of a program or library that ++# is built using GNU Libtool, you may include this file under the ++# same distribution terms that you use for the rest of that program. ++# ++# GNU Libtool is distributed in the hope that it will be useful, ++# but WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++# GNU General Public License for more details. + # +-# Substitute a variable $(am__untar) that extract such +-# a tarball read from stdin. +-# $(am__untar) < result.tar +-AC_DEFUN([_AM_PROG_TAR], +-[# Always define AMTAR for backward compatibility. +-AM_MISSING_PROG([AMTAR], [tar]) +-m4_if([$1], [v7], +- [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'], +- [m4_case([$1], [ustar],, [pax],, +- [m4_fatal([Unknown tar format])]) +-AC_MSG_CHECKING([how to create a $1 tar archive]) +-# Loop over all known methods to create a tar archive until one works. +-_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' +-_am_tools=${am_cv_prog_tar_$1-$_am_tools} +-# Do not fold the above two line into one, because Tru64 sh and +-# Solaris sh will not grok spaces in the rhs of `-'. +-for _am_tool in $_am_tools +-do +- case $_am_tool in +- gnutar) +- for _am_tar in tar gnutar gtar; +- do +- AM_RUN_LOG([$_am_tar --version]) && break +- done +- am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' +- am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' +- am__untar="$_am_tar -xf -" +- ;; +- plaintar) +- # Must skip GNU tar: if it does not support --format= it doesn't create +- # ustar tarball either. +- (tar --version) >/dev/null 2>&1 && continue +- am__tar='tar chf - "$$tardir"' +- am__tar_='tar chf - "$tardir"' +- am__untar='tar xf -' +- ;; +- pax) +- am__tar='pax -L -x $1 -w "$$tardir"' +- am__tar_='pax -L -x $1 -w "$tardir"' +- am__untar='pax -r' +- ;; +- cpio) +- am__tar='find "$$tardir" -print | cpio -o -H $1 -L' +- am__tar_='find "$tardir" -print | cpio -o -H $1 -L' +- am__untar='cpio -i -H $1 -d' +- ;; +- none) +- am__tar=false +- am__tar_=false +- am__untar=false +- ;; +- esac ++# You should have received a copy of the GNU General Public License ++# along with GNU Libtool; see the file COPYING. If not, a copy ++# can be downloaded from http://www.gnu.org/licenses/gpl.html, or ++# obtained by writing to the Free Software Foundation, Inc., ++# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. ++]) + +- # If the value was cached, stop now. We just wanted to have am__tar +- # and am__untar set. +- test -n "${am_cv_prog_tar_$1}" && break ++# serial 56 LT_INIT + +- # tar/untar a dummy directory, and stop if the command works +- rm -rf conftest.dir +- mkdir conftest.dir +- echo GrepMe > conftest.dir/file +- AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) +- rm -rf conftest.dir +- if test -s conftest.tar; then +- AM_RUN_LOG([$am__untar /dev/null 2>&1 && break +- fi +-done +-rm -rf conftest.dir + +-AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) +-AC_MSG_RESULT([$am_cv_prog_tar_$1])]) +-AC_SUBST([am__tar]) +-AC_SUBST([am__untar]) +-]) # _AM_PROG_TAR ++# LT_PREREQ(VERSION) ++# ------------------ ++# Complain and exit if this libtool version is less that VERSION. ++m4_defun([LT_PREREQ], ++[m4_if(m4_version_compare(m4_defn([LT_PACKAGE_VERSION]), [$1]), -1, ++ [m4_default([$3], ++ [m4_fatal([Libtool version $1 or higher is required], ++ 63)])], ++ [$2])]) + +-dnl AM_GCONF_SOURCE_2 +-dnl Defines GCONF_SCHEMA_CONFIG_SOURCE which is where you should install schemas +-dnl (i.e. pass to gconftool-2 +-dnl Defines GCONF_SCHEMA_FILE_DIR which is a filesystem directory where +-dnl you should install foo.schemas files +-dnl + +-AC_DEFUN([AM_GCONF_SOURCE_2], +-[ +- if test "x$GCONF_SCHEMA_INSTALL_SOURCE" = "x"; then +- GCONF_SCHEMA_CONFIG_SOURCE=`gconftool-2 --get-default-source` +- else +- GCONF_SCHEMA_CONFIG_SOURCE=$GCONF_SCHEMA_INSTALL_SOURCE +- fi ++# _LT_CHECK_BUILDDIR ++# ------------------ ++# Complain if the absolute build directory name contains unusual characters ++m4_defun([_LT_CHECK_BUILDDIR], ++[case `pwd` in ++ *\ * | *\ *) ++ AC_MSG_WARN([Libtool does not cope well with whitespace in `pwd`]) ;; ++esac ++]) + +- AC_ARG_WITH([gconf-source], +- AC_HELP_STRING([--with-gconf-source=sourceaddress], +- [Config database for installing schema files.]), +- [GCONF_SCHEMA_CONFIG_SOURCE="$withval"],) + +- AC_SUBST(GCONF_SCHEMA_CONFIG_SOURCE) +- AC_MSG_RESULT([Using config source $GCONF_SCHEMA_CONFIG_SOURCE for schema installation]) ++# LT_INIT([OPTIONS]) ++# ------------------ ++AC_DEFUN([LT_INIT], ++[AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT ++AC_BEFORE([$0], [LT_LANG])dnl ++AC_BEFORE([$0], [LT_OUTPUT])dnl ++AC_BEFORE([$0], [LTDL_INIT])dnl ++m4_require([_LT_CHECK_BUILDDIR])dnl ++ ++dnl Autoconf doesn't catch unexpanded LT_ macros by default: ++m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl ++m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$])dnl ++dnl aclocal doesn't pull ltoptions.m4, ltsugar.m4, or ltversion.m4 ++dnl unless we require an AC_DEFUNed macro: ++AC_REQUIRE([LTOPTIONS_VERSION])dnl ++AC_REQUIRE([LTSUGAR_VERSION])dnl ++AC_REQUIRE([LTVERSION_VERSION])dnl ++AC_REQUIRE([LTOBSOLETE_VERSION])dnl ++m4_require([_LT_PROG_LTMAIN])dnl + +- if test "x$GCONF_SCHEMA_FILE_DIR" = "x"; then +- GCONF_SCHEMA_FILE_DIR='$(sysconfdir)/gconf/schemas' +- fi ++dnl Parse OPTIONS ++_LT_SET_OPTIONS([$0], [$1]) + +- AC_ARG_WITH([gconf-schema-file-dir], +- AC_HELP_STRING([--with-gconf-schema-file-dir=dir], +- [Directory for installing schema files.]), +- [GCONF_SCHEMA_FILE_DIR="$withval"],) ++# This can be used to rebuild libtool when needed ++LIBTOOL_DEPS="$ltmain" + +- AC_SUBST(GCONF_SCHEMA_FILE_DIR) +- AC_MSG_RESULT([Using $GCONF_SCHEMA_FILE_DIR as install directory for schema files]) ++# Always use our own libtool. ++LIBTOOL='$(SHELL) $(top_builddir)/libtool' ++AC_SUBST(LIBTOOL)dnl + +- AC_ARG_ENABLE(schemas-install, +- [ --disable-schemas-install Disable the schemas installation], +- [case ${enableval} in +- yes|no) ;; +- *) AC_MSG_ERROR(bad value ${enableval} for --enable-schemas-install) ;; +- esac]) +- AM_CONDITIONAL([GCONF_SCHEMAS_INSTALL], [test "$enable_schemas_install" != no]) ++_LT_SETUP ++ ++# Only expand once: ++m4_define([LT_INIT]) ++])# LT_INIT ++ ++# Old names: ++AU_ALIAS([AC_PROG_LIBTOOL], [LT_INIT]) ++AU_ALIAS([AM_PROG_LIBTOOL], [LT_INIT]) ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([AC_PROG_LIBTOOL], []) ++dnl AC_DEFUN([AM_PROG_LIBTOOL], []) ++ ++ ++# _LT_CC_BASENAME(CC) ++# ------------------- ++# Calculate cc_basename. Skip known compiler wrappers and cross-prefix. ++m4_defun([_LT_CC_BASENAME], ++[for cc_temp in $1""; do ++ case $cc_temp in ++ compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;; ++ distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;; ++ \-*) ;; ++ *) break;; ++ esac ++done ++cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` + ]) + +-# Copyright (C) 1995-2002 Free Software Foundation, Inc. +-# Copyright (C) 2001-2003,2004 Red Hat, Inc. +-# +-# This file is free software, distributed under the terms of the GNU +-# General Public License. As a special exception to the GNU General +-# Public License, this file may be distributed as part of a program +-# that contains a configuration script generated by Autoconf, under +-# the same distribution terms as the rest of that program. +-# +-# This file can be copied and used freely without restrictions. It can +-# be used in projects which are not available under the GNU Public License +-# but which still want to provide support for the GNU gettext functionality. +-# +-# Macro to add for using GNU gettext. +-# Ulrich Drepper , 1995, 1996 +-# +-# Modified to never use included libintl. +-# Owen Taylor , 12/15/1998 +-# +-# Major rework to remove unused code +-# Owen Taylor , 12/11/2002 +-# +-# Added better handling of ALL_LINGUAS from GNU gettext version +-# written by Bruno Haible, Owen Taylor 5/30/3002 +-# +-# Modified to require ngettext +-# Matthias Clasen 08/06/2004 +-# +-# We need this here as well, since someone might use autoconf-2.5x +-# to configure GLib then an older version to configure a package +-# using AM_GLIB_GNU_GETTEXT +-AC_PREREQ(2.53) + ++# _LT_FILEUTILS_DEFAULTS ++# ---------------------- ++# It is okay to use these file commands and assume they have been set ++# sensibly after `m4_require([_LT_FILEUTILS_DEFAULTS])'. ++m4_defun([_LT_FILEUTILS_DEFAULTS], ++[: ${CP="cp -f"} ++: ${MV="mv -f"} ++: ${RM="rm -f"} ++])# _LT_FILEUTILS_DEFAULTS ++ ++ ++# _LT_SETUP ++# --------- ++m4_defun([_LT_SETUP], ++[AC_REQUIRE([AC_CANONICAL_HOST])dnl ++AC_REQUIRE([AC_CANONICAL_BUILD])dnl ++_LT_DECL([], [host_alias], [0], [The host system])dnl ++_LT_DECL([], [host], [0])dnl ++_LT_DECL([], [host_os], [0])dnl + dnl +-dnl We go to great lengths to make sure that aclocal won't +-dnl try to pull in the installed version of these macros +-dnl when running aclocal in the glib directory. ++_LT_DECL([], [build_alias], [0], [The build system])dnl ++_LT_DECL([], [build], [0])dnl ++_LT_DECL([], [build_os], [0])dnl + dnl +-m4_copy([AC_DEFUN],[glib_DEFUN]) +-m4_copy([AC_REQUIRE],[glib_REQUIRE]) ++AC_REQUIRE([AC_PROG_CC])dnl ++AC_REQUIRE([LT_PATH_LD])dnl ++AC_REQUIRE([LT_PATH_NM])dnl + dnl +-dnl At the end, if we're not within glib, we'll define the public +-dnl definitions in terms of our private definitions. ++AC_REQUIRE([AC_PROG_LN_S])dnl ++test -z "$LN_S" && LN_S="ln -s" ++_LT_DECL([], [LN_S], [1], [Whether we need soft or hard links])dnl + dnl ++AC_REQUIRE([LT_CMD_MAX_LEN])dnl ++_LT_DECL([objext], [ac_objext], [0], [Object file suffix (normally "o")])dnl ++_LT_DECL([], [exeext], [0], [Executable file suffix (normally "")])dnl ++dnl ++m4_require([_LT_FILEUTILS_DEFAULTS])dnl ++m4_require([_LT_CHECK_SHELL_FEATURES])dnl ++m4_require([_LT_CMD_RELOAD])dnl ++m4_require([_LT_CHECK_MAGIC_METHOD])dnl ++m4_require([_LT_CMD_OLD_ARCHIVE])dnl ++m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl + +-# GLIB_LC_MESSAGES +-#-------------------- +-glib_DEFUN([GLIB_LC_MESSAGES], +- [AC_CHECK_HEADERS([locale.h]) +- if test $ac_cv_header_locale_h = yes; then +- AC_CACHE_CHECK([for LC_MESSAGES], am_cv_val_LC_MESSAGES, +- [AC_TRY_LINK([#include ], [return LC_MESSAGES], +- am_cv_val_LC_MESSAGES=yes, am_cv_val_LC_MESSAGES=no)]) +- if test $am_cv_val_LC_MESSAGES = yes; then +- AC_DEFINE(HAVE_LC_MESSAGES, 1, +- [Define if your file defines LC_MESSAGES.]) +- fi +- fi]) +- +-# GLIB_PATH_PROG_WITH_TEST +-#---------------------------- +-dnl GLIB_PATH_PROG_WITH_TEST(VARIABLE, PROG-TO-CHECK-FOR, +-dnl TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]]) +-glib_DEFUN([GLIB_PATH_PROG_WITH_TEST], +-[# Extract the first word of "$2", so it can be a program name with args. +-set dummy $2; ac_word=[$]2 +-AC_MSG_CHECKING([for $ac_word]) +-AC_CACHE_VAL(ac_cv_path_$1, +-[case "[$]$1" in +- /*) +- ac_cv_path_$1="[$]$1" # Let the user override the test with a path. +- ;; +- *) +- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" +- for ac_dir in ifelse([$5], , $PATH, [$5]); do +- test -z "$ac_dir" && ac_dir=. +- if test -f $ac_dir/$ac_word; then +- if [$3]; then +- ac_cv_path_$1="$ac_dir/$ac_word" +- break +- fi +- fi +- done +- IFS="$ac_save_ifs" +-dnl If no 4th arg is given, leave the cache variable unset, +-dnl so AC_PATH_PROGS will keep looking. +-ifelse([$4], , , [ test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4" +-])dnl +- ;; +-esac])dnl +-$1="$ac_cv_path_$1" +-if test ifelse([$4], , [-n "[$]$1"], ["[$]$1" != "$4"]); then +- AC_MSG_RESULT([$]$1) +-else +- AC_MSG_RESULT(no) ++_LT_CONFIG_LIBTOOL_INIT([ ++# See if we are running on zsh, and set the options which allow our ++# commands through without removal of \ escapes INIT. ++if test -n "\${ZSH_VERSION+set}" ; then ++ setopt NO_GLOB_SUBST + fi +-AC_SUBST($1)dnl + ]) ++if test -n "${ZSH_VERSION+set}" ; then ++ setopt NO_GLOB_SUBST ++fi + +-# GLIB_WITH_NLS +-#----------------- +-glib_DEFUN([GLIB_WITH_NLS], +- dnl NLS is obligatory +- [USE_NLS=yes +- AC_SUBST(USE_NLS) ++_LT_CHECK_OBJDIR + +- gt_cv_have_gettext=no ++m4_require([_LT_TAG_COMPILER])dnl ++_LT_PROG_ECHO_BACKSLASH + +- CATOBJEXT=NONE +- XGETTEXT=: +- INTLLIBS= ++case $host_os in ++aix3*) ++ # AIX sometimes has problems with the GCC collect2 program. For some ++ # reason, if we set the COLLECT_NAMES environment variable, the problems ++ # vanish in a puff of smoke. ++ if test "X${COLLECT_NAMES+set}" != Xset; then ++ COLLECT_NAMES= ++ export COLLECT_NAMES ++ fi ++ ;; ++esac + +- AC_CHECK_HEADER(libintl.h, +- [gt_cv_func_dgettext_libintl="no" +- libintl_extra_libs="" ++# Sed substitution that helps us do robust quoting. It backslashifies ++# metacharacters that are still active within double-quoted strings. ++sed_quote_subst='s/\([["`$\\]]\)/\\\1/g' + +- # +- # First check in libc +- # +- AC_CACHE_CHECK([for ngettext in libc], gt_cv_func_ngettext_libc, +- [AC_TRY_LINK([ +-#include +-], +- [return !ngettext ("","", 1)], +- gt_cv_func_ngettext_libc=yes, +- gt_cv_func_ngettext_libc=no) +- ]) +- +- if test "$gt_cv_func_ngettext_libc" = "yes" ; then +- AC_CACHE_CHECK([for dgettext in libc], gt_cv_func_dgettext_libc, +- [AC_TRY_LINK([ +-#include +-], +- [return !dgettext ("","")], +- gt_cv_func_dgettext_libc=yes, +- gt_cv_func_dgettext_libc=no) +- ]) +- fi +- +- if test "$gt_cv_func_ngettext_libc" = "yes" ; then +- AC_CHECK_FUNCS(bind_textdomain_codeset) +- fi ++# Same as above, but do not quote variable references. ++double_quote_subst='s/\([["`\\]]\)/\\\1/g' + +- # +- # If we don't have everything we want, check in libintl +- # +- if test "$gt_cv_func_dgettext_libc" != "yes" \ +- || test "$gt_cv_func_ngettext_libc" != "yes" \ +- || test "$ac_cv_func_bind_textdomain_codeset" != "yes" ; then +- +- AC_CHECK_LIB(intl, bindtextdomain, +- [AC_CHECK_LIB(intl, ngettext, +- [AC_CHECK_LIB(intl, dgettext, +- gt_cv_func_dgettext_libintl=yes)])]) ++# Sed substitution to delay expansion of an escaped shell variable in a ++# double_quote_subst'ed string. ++delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' + +- if test "$gt_cv_func_dgettext_libintl" != "yes" ; then +- AC_MSG_CHECKING([if -liconv is needed to use gettext]) +- AC_MSG_RESULT([]) +- AC_CHECK_LIB(intl, ngettext, +- [AC_CHECK_LIB(intl, dcgettext, +- [gt_cv_func_dgettext_libintl=yes +- libintl_extra_libs=-liconv], +- :,-liconv)], +- :,-liconv) +- fi ++# Sed substitution to delay expansion of an escaped single quote. ++delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' + +- # +- # If we found libintl, then check in it for bind_textdomain_codeset(); +- # we'll prefer libc if neither have bind_textdomain_codeset(), +- # and both have dgettext and ngettext +- # +- if test "$gt_cv_func_dgettext_libintl" = "yes" ; then +- glib_save_LIBS="$LIBS" +- LIBS="$LIBS -lintl $libintl_extra_libs" +- unset ac_cv_func_bind_textdomain_codeset +- AC_CHECK_FUNCS(bind_textdomain_codeset) +- LIBS="$glib_save_LIBS" ++# Sed substitution to avoid accidental globbing in evaled expressions ++no_glob_subst='s/\*/\\\*/g' + +- if test "$ac_cv_func_bind_textdomain_codeset" = "yes" ; then +- gt_cv_func_dgettext_libc=no +- else +- if test "$gt_cv_func_dgettext_libc" = "yes" \ +- && test "$gt_cv_func_ngettext_libc" = "yes"; then +- gt_cv_func_dgettext_libintl=no +- fi +- fi +- fi +- fi ++# Global variables: ++ofile=libtool ++can_build_shared=yes + +- if test "$gt_cv_func_dgettext_libc" = "yes" \ +- || test "$gt_cv_func_dgettext_libintl" = "yes"; then +- gt_cv_have_gettext=yes +- fi +- +- if test "$gt_cv_func_dgettext_libintl" = "yes"; then +- INTLLIBS="-lintl $libintl_extra_libs" +- fi +- +- if test "$gt_cv_have_gettext" = "yes"; then +- AC_DEFINE(HAVE_GETTEXT,1, +- [Define if the GNU gettext() function is already present or preinstalled.]) +- GLIB_PATH_PROG_WITH_TEST(MSGFMT, msgfmt, +- [test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], no)dnl +- if test "$MSGFMT" != "no"; then +- glib_save_LIBS="$LIBS" +- LIBS="$LIBS $INTLLIBS" +- AC_CHECK_FUNCS(dcgettext) +- MSGFMT_OPTS= +- AC_MSG_CHECKING([if msgfmt accepts -c]) +- GLIB_RUN_PROG([$MSGFMT -c -o /dev/null],[ +-msgid "" +-msgstr "" +-"Content-Type: text/plain; charset=UTF-8\n" +-"Project-Id-Version: test 1.0\n" +-"PO-Revision-Date: 2007-02-15 12:01+0100\n" +-"Last-Translator: test \n" +-"Language-Team: C \n" +-"MIME-Version: 1.0\n" +-"Content-Transfer-Encoding: 8bit\n" +-], [MSGFMT_OPTS=-c; AC_MSG_RESULT([yes])], [AC_MSG_RESULT([no])]) +- AC_SUBST(MSGFMT_OPTS) +- AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT) +- GLIB_PATH_PROG_WITH_TEST(XGETTEXT, xgettext, +- [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :) +- AC_TRY_LINK(, [extern int _nl_msg_cat_cntr; +- return _nl_msg_cat_cntr], +- [CATOBJEXT=.gmo +- DATADIRNAME=share], +- [case $host in +- *-*-solaris*) +- dnl On Solaris, if bind_textdomain_codeset is in libc, +- dnl GNU format message catalog is always supported, +- dnl since both are added to the libc all together. +- dnl Hence, we'd like to go with DATADIRNAME=share and +- dnl and CATOBJEXT=.gmo in this case. +- AC_CHECK_FUNC(bind_textdomain_codeset, +- [CATOBJEXT=.gmo +- DATADIRNAME=share], +- [CATOBJEXT=.mo +- DATADIRNAME=lib]) +- ;; +- *) +- CATOBJEXT=.mo +- DATADIRNAME=lib +- ;; +- esac]) +- LIBS="$glib_save_LIBS" +- INSTOBJEXT=.mo +- else +- gt_cv_have_gettext=no +- fi +- fi +- ]) +- +- if test "$gt_cv_have_gettext" = "yes" ; then +- AC_DEFINE(ENABLE_NLS, 1, +- [always defined to indicate that i18n is enabled]) +- fi ++# All known linkers require a `.a' archive for static linking (except MSVC, ++# which needs '.lib'). ++libext=a + +- dnl Test whether we really found GNU xgettext. +- if test "$XGETTEXT" != ":"; then +- dnl If it is not GNU xgettext we define it as : so that the +- dnl Makefiles still can work. +- if $XGETTEXT --omit-header /dev/null 2> /dev/null; then +- : ; +- else +- AC_MSG_RESULT( +- [found xgettext program is not GNU xgettext; ignore it]) +- XGETTEXT=":" +- fi +- fi ++with_gnu_ld="$lt_cv_prog_gnu_ld" + +- # We need to process the po/ directory. +- POSUB=po ++old_CC="$CC" ++old_CFLAGS="$CFLAGS" + +- AC_OUTPUT_COMMANDS( +- [case "$CONFIG_FILES" in *po/Makefile.in*) +- sed -e "/POTFILES =/r po/POTFILES" po/Makefile.in > po/Makefile +- esac]) ++# Set sane defaults for various variables ++test -z "$CC" && CC=cc ++test -z "$LTCC" && LTCC=$CC ++test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS ++test -z "$LD" && LD=ld ++test -z "$ac_objext" && ac_objext=o + +- dnl These rules are solely for the distribution goal. While doing this +- dnl we only have to keep exactly one list of the available catalogs +- dnl in configure.in. +- for lang in $ALL_LINGUAS; do +- GMOFILES="$GMOFILES $lang.gmo" +- POFILES="$POFILES $lang.po" +- done ++_LT_CC_BASENAME([$compiler]) + +- dnl Make all variables we use known to autoconf. +- AC_SUBST(CATALOGS) +- AC_SUBST(CATOBJEXT) +- AC_SUBST(DATADIRNAME) +- AC_SUBST(GMOFILES) +- AC_SUBST(INSTOBJEXT) +- AC_SUBST(INTLLIBS) +- AC_SUBST(PO_IN_DATADIR_TRUE) +- AC_SUBST(PO_IN_DATADIR_FALSE) +- AC_SUBST(POFILES) +- AC_SUBST(POSUB) +- ]) ++# Only perform the check for file, if the check method requires it ++test -z "$MAGIC_CMD" && MAGIC_CMD=file ++case $deplibs_check_method in ++file_magic*) ++ if test "$file_magic_cmd" = '$MAGIC_CMD'; then ++ _LT_PATH_MAGIC ++ fi ++ ;; ++esac + +-# AM_GLIB_GNU_GETTEXT +-# ------------------- +-# Do checks necessary for use of gettext. If a suitable implementation +-# of gettext is found in either in libintl or in the C library, +-# it will set INTLLIBS to the libraries needed for use of gettext +-# and AC_DEFINE() HAVE_GETTEXT and ENABLE_NLS. (The shell variable +-# gt_cv_have_gettext will be set to "yes".) It will also call AC_SUBST() +-# on various variables needed by the Makefile.in.in installed by +-# glib-gettextize. +-dnl +-glib_DEFUN([GLIB_GNU_GETTEXT], +- [AC_REQUIRE([AC_PROG_CC])dnl +- AC_REQUIRE([AC_HEADER_STDC])dnl +- +- GLIB_LC_MESSAGES +- GLIB_WITH_NLS ++# Use C for the default configuration in the libtool script ++LT_SUPPORTED_TAG([CC]) ++_LT_LANG_C_CONFIG ++_LT_LANG_DEFAULT_CONFIG ++_LT_CONFIG_COMMANDS ++])# _LT_SETUP + +- if test "$gt_cv_have_gettext" = "yes"; then +- if test "x$ALL_LINGUAS" = "x"; then +- LINGUAS= +- else +- AC_MSG_CHECKING(for catalogs to be installed) +- NEW_LINGUAS= +- for presentlang in $ALL_LINGUAS; do +- useit=no +- if test "%UNSET%" != "${LINGUAS-%UNSET%}"; then +- desiredlanguages="$LINGUAS" +- else +- desiredlanguages="$ALL_LINGUAS" +- fi +- for desiredlang in $desiredlanguages; do +- # Use the presentlang catalog if desiredlang is +- # a. equal to presentlang, or +- # b. a variant of presentlang (because in this case, +- # presentlang can be used as a fallback for messages +- # which are not translated in the desiredlang catalog). +- case "$desiredlang" in +- "$presentlang"*) useit=yes;; +- esac +- done +- if test $useit = yes; then +- NEW_LINGUAS="$NEW_LINGUAS $presentlang" +- fi +- done +- LINGUAS=$NEW_LINGUAS +- AC_MSG_RESULT($LINGUAS) +- fi + +- dnl Construct list of names of catalog files to be constructed. +- if test -n "$LINGUAS"; then +- for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done +- fi +- fi ++# _LT_PROG_LTMAIN ++# --------------- ++# Note that this code is called both from `configure', and `config.status' ++# now that we use AC_CONFIG_COMMANDS to generate libtool. Notably, ++# `config.status' has no value for ac_aux_dir unless we are using Automake, ++# so we pass a copy along to make sure it has a sensible value anyway. ++m4_defun([_LT_PROG_LTMAIN], ++[m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl ++_LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir']) ++ltmain="$ac_aux_dir/ltmain.sh" ++])# _LT_PROG_LTMAIN + +- dnl If the AC_CONFIG_AUX_DIR macro for autoconf is used we possibly +- dnl find the mkinstalldirs script in another subdir but ($top_srcdir). +- dnl Try to locate is. +- MKINSTALLDIRS= +- if test -n "$ac_aux_dir"; then +- MKINSTALLDIRS="$ac_aux_dir/mkinstalldirs" +- fi +- if test -z "$MKINSTALLDIRS"; then +- MKINSTALLDIRS="\$(top_srcdir)/mkinstalldirs" +- fi +- AC_SUBST(MKINSTALLDIRS) + +- dnl Generate list of files to be processed by xgettext which will +- dnl be included in po/Makefile. +- test -d po || mkdir po +- if test "x$srcdir" != "x."; then +- if test "x`echo $srcdir | sed 's@/.*@@'`" = "x"; then +- posrcprefix="$srcdir/" +- else +- posrcprefix="../$srcdir/" +- fi +- else +- posrcprefix="../" +- fi +- rm -f po/POTFILES +- sed -e "/^#/d" -e "/^\$/d" -e "s,.*, $posrcprefix& \\\\," -e "\$s/\(.*\) \\\\/\1/" \ +- < $srcdir/po/POTFILES.in > po/POTFILES +- ]) + +-# AM_GLIB_DEFINE_LOCALEDIR(VARIABLE) +-# ------------------------------- +-# Define VARIABLE to the location where catalog files will +-# be installed by po/Makefile. +-glib_DEFUN([GLIB_DEFINE_LOCALEDIR], +-[glib_REQUIRE([GLIB_GNU_GETTEXT])dnl +-glib_save_prefix="$prefix" +-glib_save_exec_prefix="$exec_prefix" +-glib_save_datarootdir="$datarootdir" +-test "x$prefix" = xNONE && prefix=$ac_default_prefix +-test "x$exec_prefix" = xNONE && exec_prefix=$prefix +-datarootdir=`eval echo "${datarootdir}"` +-if test "x$CATOBJEXT" = "x.mo" ; then +- localedir=`eval echo "${libdir}/locale"` +-else +- localedir=`eval echo "${datadir}/locale"` +-fi +-prefix="$glib_save_prefix" +-exec_prefix="$glib_save_exec_prefix" +-datarootdir="$glib_save_datarootdir" +-AC_DEFINE_UNQUOTED($1, "$localedir", +- [Define the location where the catalogs will be installed]) +-]) ++# So that we can recreate a full libtool script including additional ++# tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS ++# in macros and then make a single call at the end using the `libtool' ++# label. + +-dnl +-dnl Now the definitions that aclocal will find +-dnl +-ifdef(glib_configure_in,[],[ +-AC_DEFUN([AM_GLIB_GNU_GETTEXT],[GLIB_GNU_GETTEXT($@)]) +-AC_DEFUN([AM_GLIB_DEFINE_LOCALEDIR],[GLIB_DEFINE_LOCALEDIR($@)]) +-])dnl + +-# GLIB_RUN_PROG(PROGRAM, TEST-FILE, [ACTION-IF-PASS], [ACTION-IF-FAIL]) +-# +-# Create a temporary file with TEST-FILE as its contents and pass the +-# file name to PROGRAM. Perform ACTION-IF-PASS if PROGRAM exits with +-# 0 and perform ACTION-IF-FAIL for any other exit status. +-AC_DEFUN([GLIB_RUN_PROG], +-[cat >conftest.foo <<_ACEOF +-$2 +-_ACEOF +-if AC_RUN_LOG([$1 conftest.foo]); then +- m4_ifval([$3], [$3], [:]) +-m4_ifvaln([$4], [else $4])dnl +-echo "$as_me: failed input was:" >&AS_MESSAGE_LOG_FD +-sed 's/^/| /' conftest.foo >&AS_MESSAGE_LOG_FD +-fi]) ++# _LT_CONFIG_LIBTOOL_INIT([INIT-COMMANDS]) ++# ---------------------------------------- ++# Register INIT-COMMANDS to be passed to AC_CONFIG_COMMANDS later. ++m4_define([_LT_CONFIG_LIBTOOL_INIT], ++[m4_ifval([$1], ++ [m4_append([_LT_OUTPUT_LIBTOOL_INIT], ++ [$1 ++])])]) + ++# Initialize. ++m4_define([_LT_OUTPUT_LIBTOOL_INIT]) + +-# gnome-common.m4 +-# + +-dnl GNOME_COMMON_INIT ++# _LT_CONFIG_LIBTOOL([COMMANDS]) ++# ------------------------------ ++# Register COMMANDS to be passed to AC_CONFIG_COMMANDS later. ++m4_define([_LT_CONFIG_LIBTOOL], ++[m4_ifval([$1], ++ [m4_append([_LT_OUTPUT_LIBTOOL_COMMANDS], ++ [$1 ++])])]) + +-AC_DEFUN([GNOME_COMMON_INIT], +-[ +- dnl this macro should come after AC_CONFIG_MACRO_DIR +- AC_BEFORE([AC_CONFIG_MACRO_DIR], [$0]) ++# Initialize. ++m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS]) + +- dnl ensure that when the Automake generated makefile calls aclocal, +- dnl it honours the $ACLOCAL_FLAGS environment variable +- ACLOCAL_AMFLAGS="\${ACLOCAL_FLAGS}" +- if test -n "$ac_macro_dir"; then +- ACLOCAL_AMFLAGS="-I $ac_macro_dir $ACLOCAL_AMFLAGS" +- fi + +- AC_SUBST([ACLOCAL_AMFLAGS]) ++# _LT_CONFIG_SAVE_COMMANDS([COMMANDS], [INIT_COMMANDS]) ++# ----------------------------------------------------- ++m4_defun([_LT_CONFIG_SAVE_COMMANDS], ++[_LT_CONFIG_LIBTOOL([$1]) ++_LT_CONFIG_LIBTOOL_INIT([$2]) + ]) + +-AC_DEFUN([GNOME_DEBUG_CHECK], +-[ +- AC_ARG_ENABLE([debug], +- AC_HELP_STRING([--enable-debug], +- [turn on debugging]),, +- [enable_debug=no]) + +- if test x$enable_debug = xyes ; then +- AC_DEFINE(GNOME_ENABLE_DEBUG, 1, +- [Enable additional debugging at the expense of performance and size]) +- fi ++# _LT_FORMAT_COMMENT([COMMENT]) ++# ----------------------------- ++# Add leading comment marks to the start of each line, and a trailing ++# full-stop to the whole comment if one is not present already. ++m4_define([_LT_FORMAT_COMMENT], ++[m4_ifval([$1], [ ++m4_bpatsubst([m4_bpatsubst([$1], [^ *], [# ])], ++ [['`$\]], [\\\&])]m4_bmatch([$1], [[!?.]$], [], [.]) ++)]) ++ ++ ++ ++ ++ ++# _LT_DECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION], [IS-TAGGED?]) ++# ------------------------------------------------------------------- ++# CONFIGNAME is the name given to the value in the libtool script. ++# VARNAME is the (base) name used in the configure script. ++# VALUE may be 0, 1 or 2 for a computed quote escaped value based on ++# VARNAME. Any other value will be used directly. ++m4_define([_LT_DECL], ++[lt_if_append_uniq([lt_decl_varnames], [$2], [, ], ++ [lt_dict_add_subkey([lt_decl_dict], [$2], [libtool_name], ++ [m4_ifval([$1], [$1], [$2])]) ++ lt_dict_add_subkey([lt_decl_dict], [$2], [value], [$3]) ++ m4_ifval([$4], ++ [lt_dict_add_subkey([lt_decl_dict], [$2], [description], [$4])]) ++ lt_dict_add_subkey([lt_decl_dict], [$2], ++ [tagged?], [m4_ifval([$5], [yes], [no])])]) + ]) + +-dnl GNOME_MAINTAINER_MODE_DEFINES () +-dnl define DISABLE_DEPRECATED +-dnl +-AC_DEFUN([GNOME_MAINTAINER_MODE_DEFINES], +-[ +- AC_REQUIRE([AM_MAINTAINER_MODE]) + +- if test $USE_MAINTAINER_MODE = yes; then +- DISABLE_DEPRECATED="-DG_DISABLE_DEPRECATED -DGDK_DISABLE_DEPRECATED -DGDK_PIXBUF_DISABLE_DEPRECATED -DPANGO_DISABLE_DEPRECATED -DGTK_DISABLE_DEPRECATED -DGCONF_DISABLE_DEPRECATED -DBONOBO_DISABLE_DEPRECATED -DBONOBO_UI_DISABLE_DEPRECATED -DGNOME_VFS_DISABLE_DEPRECATED -DGNOME_DISABLE_DEPRECATED -DLIBGLADE_DISABLE_DEPRECATED -DWNCK_DISABLE_DEPRECATED -DLIBSOUP_DISABLE_DEPRECATED" +- else +- DISABLE_DEPRECATED="" +- fi +- AC_SUBST(DISABLE_DEPRECATED) ++# _LT_TAGDECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION]) ++# -------------------------------------------------------- ++m4_define([_LT_TAGDECL], [_LT_DECL([$1], [$2], [$3], [$4], [yes])]) ++ ++ ++# lt_decl_tag_varnames([SEPARATOR], [VARNAME1...]) ++# ------------------------------------------------ ++m4_define([lt_decl_tag_varnames], ++[_lt_decl_filter([tagged?], [yes], $@)]) ++ ++ ++# _lt_decl_filter(SUBKEY, VALUE, [SEPARATOR], [VARNAME1..]) ++# --------------------------------------------------------- ++m4_define([_lt_decl_filter], ++[m4_case([$#], ++ [0], [m4_fatal([$0: too few arguments: $#])], ++ [1], [m4_fatal([$0: too few arguments: $#: $1])], ++ [2], [lt_dict_filter([lt_decl_dict], [$1], [$2], [], lt_decl_varnames)], ++ [3], [lt_dict_filter([lt_decl_dict], [$1], [$2], [$3], lt_decl_varnames)], ++ [lt_dict_filter([lt_decl_dict], $@)])[]dnl + ]) + +-dnl GNOME_COMPILE_WARNINGS +-dnl Turn on many useful compiler warnings +-dnl For now, only works on GCC +-AC_DEFUN([GNOME_COMPILE_WARNINGS],[ +- dnl ****************************** +- dnl More compiler warnings +- dnl ****************************** + +- AC_ARG_ENABLE(compile-warnings, +- AC_HELP_STRING([--enable-compile-warnings=@<:@no/minimum/yes/maximum/error@:>@], +- [Turn on compiler warnings]),, +- [enable_compile_warnings="m4_default([$1],[yes])"]) ++# lt_decl_quote_varnames([SEPARATOR], [VARNAME1...]) ++# -------------------------------------------------- ++m4_define([lt_decl_quote_varnames], ++[_lt_decl_filter([value], [1], $@)]) + +- warnCFLAGS= +- if test "x$GCC" != xyes; then +- enable_compile_warnings=no +- fi + +- warning_flags= +- realsave_CFLAGS="$CFLAGS" ++# lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...]) ++# --------------------------------------------------- ++m4_define([lt_decl_dquote_varnames], ++[_lt_decl_filter([value], [2], $@)]) + +- case "$enable_compile_warnings" in +- no) +- warning_flags= +- ;; +- minimum) +- warning_flags="-Wall" +- ;; +- yes) +- warning_flags="-Wall -Wmissing-prototypes" +- ;; +- maximum|error) +- warning_flags="-Wall -Wmissing-prototypes -Wnested-externs -Wpointer-arith" +- CFLAGS="$warning_flags $CFLAGS" +- for option in -Wno-sign-compare; do +- SAVE_CFLAGS="$CFLAGS" +- CFLAGS="$CFLAGS $option" +- AC_MSG_CHECKING([whether gcc understands $option]) +- AC_TRY_COMPILE([], [], +- has_option=yes, +- has_option=no,) +- CFLAGS="$SAVE_CFLAGS" +- AC_MSG_RESULT($has_option) +- if test $has_option = yes; then +- warning_flags="$warning_flags $option" +- fi +- unset has_option +- unset SAVE_CFLAGS +- done +- unset option +- if test "$enable_compile_warnings" = "error" ; then +- warning_flags="$warning_flags -Werror" +- fi +- ;; +- *) +- AC_MSG_ERROR(Unknown argument '$enable_compile_warnings' to --enable-compile-warnings) +- ;; +- esac +- CFLAGS="$realsave_CFLAGS" +- AC_MSG_CHECKING(what warning flags to pass to the C compiler) +- AC_MSG_RESULT($warning_flags) + +- AC_ARG_ENABLE(iso-c, +- AC_HELP_STRING([--enable-iso-c], +- [Try to warn if code is not ISO C ]),, +- [enable_iso_c=no]) ++# lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...]) ++# --------------------------------------------------- ++m4_define([lt_decl_varnames_tagged], ++[_$0(m4_quote(m4_default([$1], [[, ]])), ++ m4_quote(m4_if([$2], [], ++ m4_quote(lt_decl_tag_varnames), ++ m4_quote(m4_shift($@)))), ++ m4_split(m4_normalize(m4_quote(_LT_TAGS))))]) ++m4_define([_lt_decl_varnames_tagged], [lt_combine([$1], [$2], [_], $3)]) + +- AC_MSG_CHECKING(what language compliance flags to pass to the C compiler) +- complCFLAGS= +- if test "x$enable_iso_c" != "xno"; then +- if test "x$GCC" = "xyes"; then +- case " $CFLAGS " in +- *[\ \ ]-ansi[\ \ ]*) ;; +- *) complCFLAGS="$complCFLAGS -ansi" ;; +- esac +- case " $CFLAGS " in +- *[\ \ ]-pedantic[\ \ ]*) ;; +- *) complCFLAGS="$complCFLAGS -pedantic" ;; +- esac +- fi +- fi +- AC_MSG_RESULT($complCFLAGS) + +- WARN_CFLAGS="$warning_flags $complCFLAGS" +- AC_SUBST(WARN_CFLAGS) ++# lt_decl_all_varnames([SEPARATOR], [VARNAME1...]) ++# ------------------------------------------------ ++m4_define([lt_decl_all_varnames], ++[_$0(m4_quote(m4_default([$1], [[, ]])), ++ m4_if([$2], [], ++ m4_quote(lt_decl_varnames), ++ m4_quote(m4_shift($@))))[]dnl ++]) ++m4_define([_lt_decl_all_varnames], ++[lt_join($@, lt_decl_varnames_tagged([$1], ++ lt_decl_tag_varnames([[, ]], m4_shift($@))))dnl + ]) + +-dnl For C++, do basically the same thing. + +-AC_DEFUN([GNOME_CXX_WARNINGS],[ +- AC_ARG_ENABLE(cxx-warnings, +- AC_HELP_STRING([--enable-cxx-warnings=@<:@no/minimum/yes@:>@] +- [Turn on compiler warnings.]),, +- [enable_cxx_warnings="m4_default([$1],[minimum])"]) ++# _LT_CONFIG_STATUS_DECLARE([VARNAME]) ++# ------------------------------------ ++# Quote a variable value, and forward it to `config.status' so that its ++# declaration there will have the same value as in `configure'. VARNAME ++# must have a single quote delimited value for this to work. ++m4_define([_LT_CONFIG_STATUS_DECLARE], ++[$1='`$ECHO "X$][$1" | $Xsed -e "$delay_single_quote_subst"`']) + +- AC_MSG_CHECKING(what warning flags to pass to the C++ compiler) +- warnCXXFLAGS= +- if test "x$GXX" != xyes; then +- enable_cxx_warnings=no +- fi +- if test "x$enable_cxx_warnings" != "xno"; then +- if test "x$GXX" = "xyes"; then +- case " $CXXFLAGS " in +- *[\ \ ]-Wall[\ \ ]*) ;; +- *) warnCXXFLAGS="-Wall -Wno-unused" ;; +- esac + +- ## -W is not all that useful. And it cannot be controlled +- ## with individual -Wno-xxx flags, unlike -Wall +- if test "x$enable_cxx_warnings" = "xyes"; then +- warnCXXFLAGS="$warnCXXFLAGS -Wshadow -Woverloaded-virtual" +- fi +- fi +- fi +- AC_MSG_RESULT($warnCXXFLAGS) ++# _LT_CONFIG_STATUS_DECLARATIONS ++# ------------------------------ ++# We delimit libtool config variables with single quotes, so when ++# we write them to config.status, we have to be sure to quote all ++# embedded single quotes properly. In configure, this macro expands ++# each variable declared with _LT_DECL (and _LT_TAGDECL) into: ++# ++# ='`$ECHO "X$" | $Xsed -e "$delay_single_quote_subst"`' ++m4_defun([_LT_CONFIG_STATUS_DECLARATIONS], ++[m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames), ++ [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])]) + +- AC_ARG_ENABLE(iso-cxx, +- AC_HELP_STRING([--enable-iso-cxx], +- [Try to warn if code is not ISO C++ ]),, +- [enable_iso_cxx=no]) + +- AC_MSG_CHECKING(what language compliance flags to pass to the C++ compiler) +- complCXXFLAGS= +- if test "x$enable_iso_cxx" != "xno"; then +- if test "x$GXX" = "xyes"; then +- case " $CXXFLAGS " in +- *[\ \ ]-ansi[\ \ ]*) ;; +- *) complCXXFLAGS="$complCXXFLAGS -ansi" ;; +- esac ++# _LT_LIBTOOL_TAGS ++# ---------------- ++# Output comment and list of tags supported by the script ++m4_defun([_LT_LIBTOOL_TAGS], ++[_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl ++available_tags="_LT_TAGS"dnl ++]) + +- case " $CXXFLAGS " in +- *[\ \ ]-pedantic[\ \ ]*) ;; +- *) complCXXFLAGS="$complCXXFLAGS -pedantic" ;; +- esac +- fi +- fi +- AC_MSG_RESULT($complCXXFLAGS) + +- WARN_CXXFLAGS="$CXXFLAGS $warnCXXFLAGS $complCXXFLAGS" +- AC_SUBST(WARN_CXXFLAGS) ++# _LT_LIBTOOL_DECLARE(VARNAME, [TAG]) ++# ----------------------------------- ++# Extract the dictionary values for VARNAME (optionally with TAG) and ++# expand to a commented shell variable setting: ++# ++# # Some comment about what VAR is for. ++# visible_name=$lt_internal_name ++m4_define([_LT_LIBTOOL_DECLARE], ++[_LT_FORMAT_COMMENT(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], ++ [description])))[]dnl ++m4_pushdef([_libtool_name], ++ m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [libtool_name])))[]dnl ++m4_case(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [value])), ++ [0], [_libtool_name=[$]$1], ++ [1], [_libtool_name=$lt_[]$1], ++ [2], [_libtool_name=$lt_[]$1], ++ [_libtool_name=lt_dict_fetch([lt_decl_dict], [$1], [value])])[]dnl ++m4_ifval([$2], [_$2])[]m4_popdef([_libtool_name])[]dnl + ]) + + +-dnl IT_PROG_INTLTOOL([MINIMUM-VERSION], [no-xml]) +-# serial 40 IT_PROG_INTLTOOL +-AC_DEFUN([IT_PROG_INTLTOOL], [ +-AC_PREREQ([2.50])dnl +-AC_REQUIRE([AM_NLS])dnl ++# _LT_LIBTOOL_CONFIG_VARS ++# ----------------------- ++# Produce commented declarations of non-tagged libtool config variables ++# suitable for insertion in the LIBTOOL CONFIG section of the `libtool' ++# script. Tagged libtool config variables (even for the LIBTOOL CONFIG ++# section) are produced by _LT_LIBTOOL_TAG_VARS. ++m4_defun([_LT_LIBTOOL_CONFIG_VARS], ++[m4_foreach([_lt_var], ++ m4_quote(_lt_decl_filter([tagged?], [no], [], lt_decl_varnames)), ++ [m4_n([_LT_LIBTOOL_DECLARE(_lt_var)])])]) + +-case "$am__api_version" in +- 1.[01234]) +- AC_MSG_ERROR([Automake 1.5 or newer is required to use intltool]) +- ;; ++ ++# _LT_LIBTOOL_TAG_VARS(TAG) ++# ------------------------- ++m4_define([_LT_LIBTOOL_TAG_VARS], ++[m4_foreach([_lt_var], m4_quote(lt_decl_tag_varnames), ++ [m4_n([_LT_LIBTOOL_DECLARE(_lt_var, [$1])])])]) ++ ++ ++# _LT_TAGVAR(VARNAME, [TAGNAME]) ++# ------------------------------ ++m4_define([_LT_TAGVAR], [m4_ifval([$2], [$1_$2], [$1])]) ++ ++ ++# _LT_CONFIG_COMMANDS ++# ------------------- ++# Send accumulated output to $CONFIG_STATUS. Thanks to the lists of ++# variables for single and double quote escaping we saved from calls ++# to _LT_DECL, we can put quote escaped variables declarations ++# into `config.status', and then the shell code to quote escape them in ++# for loops in `config.status'. Finally, any additional code accumulated ++# from calls to _LT_CONFIG_LIBTOOL_INIT is expanded. ++m4_defun([_LT_CONFIG_COMMANDS], ++[AC_PROVIDE_IFELSE([LT_OUTPUT], ++ dnl If the libtool generation code has been placed in $CONFIG_LT, ++ dnl instead of duplicating it all over again into config.status, ++ dnl then we will have config.status run $CONFIG_LT later, so it ++ dnl needs to know what name is stored there: ++ [AC_CONFIG_COMMANDS([libtool], ++ [$SHELL $CONFIG_LT || AS_EXIT(1)], [CONFIG_LT='$CONFIG_LT'])], ++ dnl If the libtool generation code is destined for config.status, ++ dnl expand the accumulated commands and init code now: ++ [AC_CONFIG_COMMANDS([libtool], ++ [_LT_OUTPUT_LIBTOOL_COMMANDS], [_LT_OUTPUT_LIBTOOL_COMMANDS_INIT])]) ++])#_LT_CONFIG_COMMANDS ++ ++ ++# Initialize. ++m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS_INIT], ++[ ++ ++# The HP-UX ksh and POSIX shell print the target directory to stdout ++# if CDPATH is set. ++(unset CDPATH) >/dev/null 2>&1 && unset CDPATH ++ ++sed_quote_subst='$sed_quote_subst' ++double_quote_subst='$double_quote_subst' ++delay_variable_subst='$delay_variable_subst' ++_LT_CONFIG_STATUS_DECLARATIONS ++LTCC='$LTCC' ++LTCFLAGS='$LTCFLAGS' ++compiler='$compiler_DEFAULT' ++ ++# Quote evaled strings. ++for var in lt_decl_all_varnames([[ \ ++]], lt_decl_quote_varnames); do ++ case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in ++ *[[\\\\\\\`\\"\\\$]]*) ++ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" ++ ;; + *) +- ;; ++ eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" ++ ;; ++ esac ++done ++ ++# Double-quote double-evaled strings. ++for var in lt_decl_all_varnames([[ \ ++]], lt_decl_dquote_varnames); do ++ case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in ++ *[[\\\\\\\`\\"\\\$]]*) ++ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" ++ ;; ++ *) ++ eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" ++ ;; ++ esac ++done ++ ++# Fix-up fallback echo if it was mangled by the above quoting rules. ++case \$lt_ECHO in ++*'\\\[$]0 --fallback-echo"')dnl " ++ lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\[$]0 --fallback-echo"\[$]/\[$]0 --fallback-echo"/'\` ++ ;; + esac + +-if test -n "$1"; then +- AC_MSG_CHECKING([for intltool >= $1]) ++_LT_OUTPUT_LIBTOOL_INIT ++]) + +- INTLTOOL_REQUIRED_VERSION_AS_INT=`echo $1 | awk -F. '{ print $ 1 * 1000 + $ 2 * 100 + $ 3; }'` +- INTLTOOL_APPLIED_VERSION=`intltool-update --version | head -1 | cut -d" " -f3` +- [INTLTOOL_APPLIED_VERSION_AS_INT=`echo $INTLTOOL_APPLIED_VERSION | awk -F. '{ print $ 1 * 1000 + $ 2 * 100 + $ 3; }'` +- ] +- AC_MSG_RESULT([$INTLTOOL_APPLIED_VERSION found]) +- test "$INTLTOOL_APPLIED_VERSION_AS_INT" -ge "$INTLTOOL_REQUIRED_VERSION_AS_INT" || +- AC_MSG_ERROR([Your intltool is too old. You need intltool $1 or later.]) +-fi + +-AC_PATH_PROG(INTLTOOL_UPDATE, [intltool-update]) +-AC_PATH_PROG(INTLTOOL_MERGE, [intltool-merge]) +-AC_PATH_PROG(INTLTOOL_EXTRACT, [intltool-extract]) +-if test -z "$INTLTOOL_UPDATE" -o -z "$INTLTOOL_MERGE" -o -z "$INTLTOOL_EXTRACT"; then +- AC_MSG_ERROR([The intltool scripts were not found. Please install intltool.]) +-fi ++# LT_OUTPUT ++# --------- ++# This macro allows early generation of the libtool script (before ++# AC_OUTPUT is called), incase it is used in configure for compilation ++# tests. ++AC_DEFUN([LT_OUTPUT], ++[: ${CONFIG_LT=./config.lt} ++AC_MSG_NOTICE([creating $CONFIG_LT]) ++cat >"$CONFIG_LT" <<_LTEOF ++#! $SHELL ++# Generated by $as_me. ++# Run this file to recreate a libtool stub with the current configuration. ++ ++lt_cl_silent=false ++SHELL=\${CONFIG_SHELL-$SHELL} ++_LTEOF ++ ++cat >>"$CONFIG_LT" <<\_LTEOF ++AS_SHELL_SANITIZE ++_AS_PREPARE + +- INTLTOOL_DESKTOP_RULE='%.desktop: %.desktop.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' +-INTLTOOL_DIRECTORY_RULE='%.directory: %.directory.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' +- INTLTOOL_KEYS_RULE='%.keys: %.keys.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -k -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' +- INTLTOOL_PROP_RULE='%.prop: %.prop.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' +- INTLTOOL_OAF_RULE='%.oaf: %.oaf.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -o -p $(top_srcdir)/po $< [$]@' +- INTLTOOL_PONG_RULE='%.pong: %.pong.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' +- INTLTOOL_SERVER_RULE='%.server: %.server.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -o -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' +- INTLTOOL_SHEET_RULE='%.sheet: %.sheet.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' +-INTLTOOL_SOUNDLIST_RULE='%.soundlist: %.soundlist.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' +- INTLTOOL_UI_RULE='%.ui: %.ui.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' +- INTLTOOL_XML_RULE='%.xml: %.xml.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' +- INTLTOOL_XML_NOMERGE_RULE='%.xml: %.xml.in $(INTLTOOL_MERGE) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u /tmp $< [$]@' +- INTLTOOL_XAM_RULE='%.xam: %.xml.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' +- INTLTOOL_KBD_RULE='%.kbd: %.kbd.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -m -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' +- INTLTOOL_CAVES_RULE='%.caves: %.caves.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' +- INTLTOOL_SCHEMAS_RULE='%.schemas: %.schemas.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -s -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' +- INTLTOOL_THEME_RULE='%.theme: %.theme.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' +- INTLTOOL_SERVICE_RULE='%.service: %.service.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' +- INTLTOOL_POLICY_RULE='%.policy: %.policy.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@' ++exec AS_MESSAGE_FD>&1 ++exec AS_MESSAGE_LOG_FD>>config.log ++{ ++ echo ++ AS_BOX([Running $as_me.]) ++} >&AS_MESSAGE_LOG_FD ++ ++lt_cl_help="\ ++\`$as_me' creates a local libtool stub from the current configuration, ++for use in further configure time tests before the real libtool is ++generated. ++ ++Usage: $[0] [[OPTIONS]] ++ ++ -h, --help print this help, then exit ++ -V, --version print version number, then exit ++ -q, --quiet do not print progress messages ++ -d, --debug don't remove temporary files ++ ++Report bugs to ." ++ ++lt_cl_version="\ ++m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl ++m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION]) ++configured by $[0], generated by m4_PACKAGE_STRING. ++ ++Copyright (C) 2008 Free Software Foundation, Inc. ++This config.lt script is free software; the Free Software Foundation ++gives unlimited permision to copy, distribute and modify it." + +-_IT_SUBST(INTLTOOL_DESKTOP_RULE) +-_IT_SUBST(INTLTOOL_DIRECTORY_RULE) +-_IT_SUBST(INTLTOOL_KEYS_RULE) +-_IT_SUBST(INTLTOOL_PROP_RULE) +-_IT_SUBST(INTLTOOL_OAF_RULE) +-_IT_SUBST(INTLTOOL_PONG_RULE) +-_IT_SUBST(INTLTOOL_SERVER_RULE) +-_IT_SUBST(INTLTOOL_SHEET_RULE) +-_IT_SUBST(INTLTOOL_SOUNDLIST_RULE) +-_IT_SUBST(INTLTOOL_UI_RULE) +-_IT_SUBST(INTLTOOL_XAM_RULE) +-_IT_SUBST(INTLTOOL_KBD_RULE) +-_IT_SUBST(INTLTOOL_XML_RULE) +-_IT_SUBST(INTLTOOL_XML_NOMERGE_RULE) +-_IT_SUBST(INTLTOOL_CAVES_RULE) +-_IT_SUBST(INTLTOOL_SCHEMAS_RULE) +-_IT_SUBST(INTLTOOL_THEME_RULE) +-_IT_SUBST(INTLTOOL_SERVICE_RULE) +-_IT_SUBST(INTLTOOL_POLICY_RULE) ++while test $[#] != 0 ++do ++ case $[1] in ++ --version | --v* | -V ) ++ echo "$lt_cl_version"; exit 0 ;; ++ --help | --h* | -h ) ++ echo "$lt_cl_help"; exit 0 ;; ++ --debug | --d* | -d ) ++ debug=: ;; ++ --quiet | --q* | --silent | --s* | -q ) ++ lt_cl_silent=: ;; + +-# Check the gettext tools to make sure they are GNU +-AC_PATH_PROG(XGETTEXT, xgettext) +-AC_PATH_PROG(MSGMERGE, msgmerge) +-AC_PATH_PROG(MSGFMT, msgfmt) +-AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT) +-if test -z "$XGETTEXT" -o -z "$MSGMERGE" -o -z "$MSGFMT"; then +- AC_MSG_ERROR([GNU gettext tools not found; required for intltool]) ++ -*) AC_MSG_ERROR([unrecognized option: $[1] ++Try \`$[0] --help' for more information.]) ;; ++ ++ *) AC_MSG_ERROR([unrecognized argument: $[1] ++Try \`$[0] --help' for more information.]) ;; ++ esac ++ shift ++done ++ ++if $lt_cl_silent; then ++ exec AS_MESSAGE_FD>/dev/null + fi +-xgversion="`$XGETTEXT --version|grep '(GNU ' 2> /dev/null`" +-mmversion="`$MSGMERGE --version|grep '(GNU ' 2> /dev/null`" +-mfversion="`$MSGFMT --version|grep '(GNU ' 2> /dev/null`" +-if test -z "$xgversion" -o -z "$mmversion" -o -z "$mfversion"; then +- AC_MSG_ERROR([GNU gettext tools not found; required for intltool]) ++_LTEOF ++ ++cat >>"$CONFIG_LT" <<_LTEOF ++_LT_OUTPUT_LIBTOOL_COMMANDS_INIT ++_LTEOF ++ ++cat >>"$CONFIG_LT" <<\_LTEOF ++AC_MSG_NOTICE([creating $ofile]) ++_LT_OUTPUT_LIBTOOL_COMMANDS ++AS_EXIT(0) ++_LTEOF ++chmod +x "$CONFIG_LT" ++ ++# configure is writing to config.log, but config.lt does its own redirection, ++# appending to config.log, which fails on DOS, as config.log is still kept ++# open by configure. Here we exec the FD to /dev/null, effectively closing ++# config.log, so it can be properly (re)opened and appended to by config.lt. ++if test "$no_create" != yes; then ++ lt_cl_success=: ++ test "$silent" = yes && ++ lt_config_lt_args="$lt_config_lt_args --quiet" ++ exec AS_MESSAGE_LOG_FD>/dev/null ++ $SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false ++ exec AS_MESSAGE_LOG_FD>>config.log ++ $lt_cl_success || AS_EXIT(1) + fi +- +-AC_PATH_PROG(INTLTOOL_PERL, perl) +-if test -z "$INTLTOOL_PERL"; then +- AC_MSG_ERROR([perl not found]) +-fi +-AC_MSG_CHECKING([for perl >= 5.8.1]) +-$INTLTOOL_PERL -e "use 5.8.1;" > /dev/null 2>&1 +-if test $? -ne 0; then +- AC_MSG_ERROR([perl 5.8.1 is required for intltool]) +-else +- IT_PERL_VERSION="`$INTLTOOL_PERL -e \"printf '%vd', $^V\"`" +- AC_MSG_RESULT([$IT_PERL_VERSION]) +-fi +-if test "x$2" != "xno-xml"; then +- AC_MSG_CHECKING([for XML::Parser]) +- if `$INTLTOOL_PERL -e "require XML::Parser" 2>/dev/null`; then +- AC_MSG_RESULT([ok]) +- else +- AC_MSG_ERROR([XML::Parser perl module is required for intltool]) +- fi +-fi +- +-# Substitute ALL_LINGUAS so we can use it in po/Makefile +-AC_SUBST(ALL_LINGUAS) +- +-# Set DATADIRNAME correctly if it is not set yet +-# (copied from glib-gettext.m4) +-if test -z "$DATADIRNAME"; then +- AC_LINK_IFELSE( +- [AC_LANG_PROGRAM([[]], +- [[extern int _nl_msg_cat_cntr; +- return _nl_msg_cat_cntr]])], +- [DATADIRNAME=share], +- [case $host in +- *-*-solaris*) +- dnl On Solaris, if bind_textdomain_codeset is in libc, +- dnl GNU format message catalog is always supported, +- dnl since both are added to the libc all together. +- dnl Hence, we'd like to go with DATADIRNAME=share +- dnl in this case. +- AC_CHECK_FUNC(bind_textdomain_codeset, +- [DATADIRNAME=share], [DATADIRNAME=lib]) +- ;; +- *) +- [DATADIRNAME=lib] +- ;; +- esac]) +-fi +-AC_SUBST(DATADIRNAME) +- +-IT_PO_SUBDIR([po]) +- +-]) +- +- +-# IT_PO_SUBDIR(DIRNAME) +-# --------------------- +-# All po subdirs have to be declared with this macro; the subdir "po" is +-# declared by IT_PROG_INTLTOOL. +-# +-AC_DEFUN([IT_PO_SUBDIR], +-[AC_PREREQ([2.53])dnl We use ac_top_srcdir inside AC_CONFIG_COMMANDS. +-dnl +-dnl The following CONFIG_COMMANDS should be exetuted at the very end +-dnl of config.status. +-AC_CONFIG_COMMANDS_PRE([ +- AC_CONFIG_COMMANDS([$1/stamp-it], [ +- if [ ! grep "^# INTLTOOL_MAKEFILE$" "$1/Makefile.in" > /dev/null ]; then +- AC_MSG_ERROR([$1/Makefile.in.in was not created by intltoolize.]) +- fi +- rm -f "$1/stamp-it" "$1/stamp-it.tmp" "$1/POTFILES" "$1/Makefile.tmp" +- >"$1/stamp-it.tmp" +- [sed '/^#/d +- s/^[[].*] *// +- /^[ ]*$/d +- '"s|^| $ac_top_srcdir/|" \ +- "$srcdir/$1/POTFILES.in" | sed '$!s/$/ \\/' >"$1/POTFILES" +- ] +- [sed '/^POTFILES =/,/[^\\]$/ { +- /^POTFILES =/!d +- r $1/POTFILES +- } +- ' "$1/Makefile.in" >"$1/Makefile"] +- rm -f "$1/Makefile.tmp" +- mv "$1/stamp-it.tmp" "$1/stamp-it" +- ]) +-])dnl +-]) +- +-# _IT_SUBST(VARIABLE) +-# ------------------- +-# Abstract macro to do either _AM_SUBST_NOTMAKE or AC_SUBST +-# +-AC_DEFUN([_IT_SUBST], +-[ +-AC_SUBST([$1]) +-m4_ifdef([_AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE([$1])]) +-] +-) +- +-# deprecated macros +-AU_ALIAS([AC_PROG_INTLTOOL], [IT_PROG_INTLTOOL]) +-# A hint is needed for aclocal from Automake <= 1.9.4: +-# AC_DEFUN([AC_PROG_INTLTOOL], ...) +- +- +-# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*- +- +-# serial 52 AC_PROG_LIBTOOL +- +- +-# AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED) +-# ----------------------------------------------------------- +-# If this macro is not defined by Autoconf, define it here. +-m4_ifdef([AC_PROVIDE_IFELSE], +- [], +- [m4_define([AC_PROVIDE_IFELSE], +- [m4_ifdef([AC_PROVIDE_$1], +- [$2], [$3])])]) ++])# LT_OUTPUT + + +-# AC_PROG_LIBTOOL ++# _LT_CONFIG(TAG) + # --------------- +-AC_DEFUN([AC_PROG_LIBTOOL], +-[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl +-dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX +-dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX. +- AC_PROVIDE_IFELSE([AC_PROG_CXX], +- [AC_LIBTOOL_CXX], +- [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX +- ])]) +-dnl And a similar setup for Fortran 77 support +- AC_PROVIDE_IFELSE([AC_PROG_F77], +- [AC_LIBTOOL_F77], +- [define([AC_PROG_F77], defn([AC_PROG_F77])[AC_LIBTOOL_F77 +-])]) +- +-dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly. +-dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run +-dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both. +- AC_PROVIDE_IFELSE([AC_PROG_GCJ], +- [AC_LIBTOOL_GCJ], +- [AC_PROVIDE_IFELSE([A][M_PROG_GCJ], +- [AC_LIBTOOL_GCJ], +- [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ], +- [AC_LIBTOOL_GCJ], +- [ifdef([AC_PROG_GCJ], +- [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ])]) +- ifdef([A][M_PROG_GCJ], +- [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ])]) +- ifdef([LT_AC_PROG_GCJ], +- [define([LT_AC_PROG_GCJ], +- defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])])]) +-])])# AC_PROG_LIBTOOL ++# If TAG is the built-in tag, create an initial libtool script with a ++# default configuration from the untagged config vars. Otherwise add code ++# to config.status for appending the configuration named by TAG from the ++# matching tagged config vars. ++m4_defun([_LT_CONFIG], ++[m4_require([_LT_FILEUTILS_DEFAULTS])dnl ++_LT_CONFIG_SAVE_COMMANDS([ ++ m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl ++ m4_if(_LT_TAG, [C], [ ++ # See if we are running on zsh, and set the options which allow our ++ # commands through without removal of \ escapes. ++ if test -n "${ZSH_VERSION+set}" ; then ++ setopt NO_GLOB_SUBST ++ fi ++ ++ cfgfile="${ofile}T" ++ trap "$RM \"$cfgfile\"; exit 1" 1 2 15 ++ $RM "$cfgfile" + ++ cat <<_LT_EOF >> "$cfgfile" ++#! $SHELL + +-# _AC_PROG_LIBTOOL +-# ---------------- +-AC_DEFUN([_AC_PROG_LIBTOOL], +-[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl +-AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl +-AC_BEFORE([$0],[AC_LIBTOOL_F77])dnl +-AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl +- +-# This can be used to rebuild libtool when needed +-LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh" +- +-# Always use our own libtool. +-LIBTOOL='$(SHELL) $(top_builddir)/libtool' +-AC_SUBST(LIBTOOL)dnl +- +-# Prevent multiple expansion +-define([AC_PROG_LIBTOOL], []) +-])# _AC_PROG_LIBTOOL +- +- +-# AC_LIBTOOL_SETUP +-# ---------------- +-AC_DEFUN([AC_LIBTOOL_SETUP], +-[AC_PREREQ(2.50)dnl +-AC_REQUIRE([AC_ENABLE_SHARED])dnl +-AC_REQUIRE([AC_ENABLE_STATIC])dnl +-AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl +-AC_REQUIRE([AC_CANONICAL_HOST])dnl +-AC_REQUIRE([AC_CANONICAL_BUILD])dnl +-AC_REQUIRE([AC_PROG_CC])dnl +-AC_REQUIRE([AC_PROG_LD])dnl +-AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl +-AC_REQUIRE([AC_PROG_NM])dnl +- +-AC_REQUIRE([AC_PROG_LN_S])dnl +-AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl +-# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers! +-AC_REQUIRE([AC_OBJEXT])dnl +-AC_REQUIRE([AC_EXEEXT])dnl +-dnl +-AC_LIBTOOL_SYS_MAX_CMD_LEN +-AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE +-AC_LIBTOOL_OBJDIR +- +-AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl +-_LT_AC_PROG_ECHO_BACKSLASH ++# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. ++# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION ++# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: ++# NOTE: Changes made to this file will be lost: look at ltmain.sh. ++# ++_LT_COPYING ++_LT_LIBTOOL_TAGS + +-case $host_os in +-aix3*) +- # AIX sometimes has problems with the GCC collect2 program. For some +- # reason, if we set the COLLECT_NAMES environment variable, the problems +- # vanish in a puff of smoke. +- if test "X${COLLECT_NAMES+set}" != Xset; then +- COLLECT_NAMES= +- export COLLECT_NAMES +- fi +- ;; +-esac ++# ### BEGIN LIBTOOL CONFIG ++_LT_LIBTOOL_CONFIG_VARS ++_LT_LIBTOOL_TAG_VARS ++# ### END LIBTOOL CONFIG + +-# Sed substitution that helps us do robust quoting. It backslashifies +-# metacharacters that are still active within double-quoted strings. +-Xsed='sed -e 1s/^X//' +-[sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g'] ++_LT_EOF + +-# Same as above, but do not quote variable references. +-[double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g'] ++ case $host_os in ++ aix3*) ++ cat <<\_LT_EOF >> "$cfgfile" ++# AIX sometimes has problems with the GCC collect2 program. For some ++# reason, if we set the COLLECT_NAMES environment variable, the problems ++# vanish in a puff of smoke. ++if test "X${COLLECT_NAMES+set}" != Xset; then ++ COLLECT_NAMES= ++ export COLLECT_NAMES ++fi ++_LT_EOF ++ ;; ++ esac + +-# Sed substitution to delay expansion of an escaped shell variable in a +-# double_quote_subst'ed string. +-delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' ++ _LT_PROG_LTMAIN + +-# Sed substitution to avoid accidental globbing in evaled expressions +-no_glob_subst='s/\*/\\\*/g' ++ # We use sed instead of cat because bash on DJGPP gets confused if ++ # if finds mixed CR/LF and LF-only lines. Since sed operates in ++ # text mode, it properly converts lines to CR/LF. This bash problem ++ # is reportedly fixed, but why not run on old versions too? ++ sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \ ++ || (rm -f "$cfgfile"; exit 1) + +-# Constants: +-rm="rm -f" ++ _LT_PROG_XSI_SHELLFNS + +-# Global variables: +-default_ofile=libtool +-can_build_shared=yes ++ sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \ ++ || (rm -f "$cfgfile"; exit 1) + +-# All known linkers require a `.a' archive for static linking (except MSVC, +-# which needs '.lib'). +-libext=a +-ltmain="$ac_aux_dir/ltmain.sh" +-ofile="$default_ofile" +-with_gnu_ld="$lt_cv_prog_gnu_ld" ++ mv -f "$cfgfile" "$ofile" || ++ (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") ++ chmod +x "$ofile" ++], ++[cat <<_LT_EOF >> "$ofile" + +-AC_CHECK_TOOL(AR, ar, false) +-AC_CHECK_TOOL(RANLIB, ranlib, :) +-AC_CHECK_TOOL(STRIP, strip, :) ++dnl Unfortunately we have to use $1 here, since _LT_TAG is not expanded ++dnl in a comment (ie after a #). ++# ### BEGIN LIBTOOL TAG CONFIG: $1 ++_LT_LIBTOOL_TAG_VARS(_LT_TAG) ++# ### END LIBTOOL TAG CONFIG: $1 ++_LT_EOF ++])dnl /m4_if ++], ++[m4_if([$1], [], [ ++ PACKAGE='$PACKAGE' ++ VERSION='$VERSION' ++ TIMESTAMP='$TIMESTAMP' ++ RM='$RM' ++ ofile='$ofile'], []) ++])dnl /_LT_CONFIG_SAVE_COMMANDS ++])# _LT_CONFIG + +-old_CC="$CC" +-old_CFLAGS="$CFLAGS" + +-# Set sane defaults for various variables +-test -z "$AR" && AR=ar +-test -z "$AR_FLAGS" && AR_FLAGS=cru +-test -z "$AS" && AS=as +-test -z "$CC" && CC=cc +-test -z "$LTCC" && LTCC=$CC +-test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS +-test -z "$DLLTOOL" && DLLTOOL=dlltool +-test -z "$LD" && LD=ld +-test -z "$LN_S" && LN_S="ln -s" +-test -z "$MAGIC_CMD" && MAGIC_CMD=file +-test -z "$NM" && NM=nm +-test -z "$SED" && SED=sed +-test -z "$OBJDUMP" && OBJDUMP=objdump +-test -z "$RANLIB" && RANLIB=: +-test -z "$STRIP" && STRIP=: +-test -z "$ac_objext" && ac_objext=o ++# LT_SUPPORTED_TAG(TAG) ++# --------------------- ++# Trace this macro to discover what tags are supported by the libtool ++# --tag option, using: ++# autoconf --trace 'LT_SUPPORTED_TAG:$1' ++AC_DEFUN([LT_SUPPORTED_TAG], []) + +-# Determine commands to create old-style static archives. +-old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' +-old_postinstall_cmds='chmod 644 $oldlib' +-old_postuninstall_cmds= + +-if test -n "$RANLIB"; then +- case $host_os in +- openbsd*) +- old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib" +- ;; +- *) +- old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib" +- ;; +- esac +- old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" +-fi ++# C support is built-in for now ++m4_define([_LT_LANG_C_enabled], []) ++m4_define([_LT_TAGS], []) + +-_LT_CC_BASENAME([$compiler]) + +-# Only perform the check for file, if the check method requires it +-case $deplibs_check_method in +-file_magic*) +- if test "$file_magic_cmd" = '$MAGIC_CMD'; then +- AC_PATH_MAGIC +- fi +- ;; +-esac ++# LT_LANG(LANG) ++# ------------- ++# Enable libtool support for the given language if not already enabled. ++AC_DEFUN([LT_LANG], ++[AC_BEFORE([$0], [LT_OUTPUT])dnl ++m4_case([$1], ++ [C], [_LT_LANG(C)], ++ [C++], [_LT_LANG(CXX)], ++ [Java], [_LT_LANG(GCJ)], ++ [Fortran 77], [_LT_LANG(F77)], ++ [Fortran], [_LT_LANG(FC)], ++ [Windows Resource], [_LT_LANG(RC)], ++ [m4_ifdef([_LT_LANG_]$1[_CONFIG], ++ [_LT_LANG($1)], ++ [m4_fatal([$0: unsupported language: "$1"])])])dnl ++])# LT_LANG + +-_LT_REQUIRED_DARWIN_CHECKS + +-AC_PROVIDE_IFELSE([AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no) +-AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL], +-enable_win32_dll=yes, enable_win32_dll=no) +- +-AC_ARG_ENABLE([libtool-lock], +- [AC_HELP_STRING([--disable-libtool-lock], +- [avoid locking (might break parallel builds)])]) +-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes ++# _LT_LANG(LANGNAME) ++# ------------------ ++m4_defun([_LT_LANG], ++[m4_ifdef([_LT_LANG_]$1[_enabled], [], ++ [LT_SUPPORTED_TAG([$1])dnl ++ m4_append([_LT_TAGS], [$1 ])dnl ++ m4_define([_LT_LANG_]$1[_enabled], [])dnl ++ _LT_LANG_$1_CONFIG($1)])dnl ++])# _LT_LANG + +-AC_ARG_WITH([pic], +- [AC_HELP_STRING([--with-pic], +- [try to use only PIC/non-PIC objects @<:@default=use both@:>@])], +- [pic_mode="$withval"], +- [pic_mode=default]) +-test -z "$pic_mode" && pic_mode=default + +-# Use C for the default configuration in the libtool script +-tagname= +-AC_LIBTOOL_LANG_C_CONFIG +-_LT_AC_TAGCONFIG +-])# AC_LIBTOOL_SETUP ++# _LT_LANG_DEFAULT_CONFIG ++# ----------------------- ++m4_defun([_LT_LANG_DEFAULT_CONFIG], ++[AC_PROVIDE_IFELSE([AC_PROG_CXX], ++ [LT_LANG(CXX)], ++ [m4_define([AC_PROG_CXX], defn([AC_PROG_CXX])[LT_LANG(CXX)])]) ++ ++AC_PROVIDE_IFELSE([AC_PROG_F77], ++ [LT_LANG(F77)], ++ [m4_define([AC_PROG_F77], defn([AC_PROG_F77])[LT_LANG(F77)])]) ++ ++AC_PROVIDE_IFELSE([AC_PROG_FC], ++ [LT_LANG(FC)], ++ [m4_define([AC_PROG_FC], defn([AC_PROG_FC])[LT_LANG(FC)])]) ++ ++dnl The call to [A][M_PROG_GCJ] is quoted like that to stop aclocal ++dnl pulling things in needlessly. ++AC_PROVIDE_IFELSE([AC_PROG_GCJ], ++ [LT_LANG(GCJ)], ++ [AC_PROVIDE_IFELSE([A][M_PROG_GCJ], ++ [LT_LANG(GCJ)], ++ [AC_PROVIDE_IFELSE([LT_PROG_GCJ], ++ [LT_LANG(GCJ)], ++ [m4_ifdef([AC_PROG_GCJ], ++ [m4_define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[LT_LANG(GCJ)])]) ++ m4_ifdef([A][M_PROG_GCJ], ++ [m4_define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[LT_LANG(GCJ)])]) ++ m4_ifdef([LT_PROG_GCJ], ++ [m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])]) ++ ++AC_PROVIDE_IFELSE([LT_PROG_RC], ++ [LT_LANG(RC)], ++ [m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])]) ++])# _LT_LANG_DEFAULT_CONFIG ++ ++# Obsolete macros: ++AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)]) ++AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)]) ++AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)]) ++AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)]) ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([AC_LIBTOOL_CXX], []) ++dnl AC_DEFUN([AC_LIBTOOL_F77], []) ++dnl AC_DEFUN([AC_LIBTOOL_FC], []) ++dnl AC_DEFUN([AC_LIBTOOL_GCJ], []) + + +-# _LT_AC_SYS_COMPILER +-# ------------------- +-AC_DEFUN([_LT_AC_SYS_COMPILER], ++# _LT_TAG_COMPILER ++# ---------------- ++m4_defun([_LT_TAG_COMPILER], + [AC_REQUIRE([AC_PROG_CC])dnl + ++_LT_DECL([LTCC], [CC], [1], [A C compiler])dnl ++_LT_DECL([LTCFLAGS], [CFLAGS], [1], [LTCC compiler flags])dnl ++_LT_TAGDECL([CC], [compiler], [1], [A language specific compiler])dnl ++_LT_TAGDECL([with_gcc], [GCC], [0], [Is the compiler the GNU compiler?])dnl ++ + # If no C compiler was specified, use CC. + LTCC=${LTCC-"$CC"} + +@@ -1985,36 +1716,20 @@ + + # Allow CC to be a program name with arguments. + compiler=$CC +-])# _LT_AC_SYS_COMPILER +- +- +-# _LT_CC_BASENAME(CC) +-# ------------------- +-# Calculate cc_basename. Skip known compiler wrappers and cross-prefix. +-AC_DEFUN([_LT_CC_BASENAME], +-[for cc_temp in $1""; do +- case $cc_temp in +- compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;; +- distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;; +- \-*) ;; +- *) break;; +- esac +-done +-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` +-]) ++])# _LT_TAG_COMPILER + + + # _LT_COMPILER_BOILERPLATE + # ------------------------ + # Check for compiler boilerplate output or warnings with + # the simple compiler test code. +-AC_DEFUN([_LT_COMPILER_BOILERPLATE], +-[AC_REQUIRE([LT_AC_PROG_SED])dnl ++m4_defun([_LT_COMPILER_BOILERPLATE], ++[m4_require([_LT_DECL_SED])dnl + ac_outfile=conftest.$ac_objext + echo "$lt_simple_compile_test_code" >conftest.$ac_ext + eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err + _lt_compiler_boilerplate=`cat conftest.err` +-$rm conftest* ++$RM conftest* + ])# _LT_COMPILER_BOILERPLATE + + +@@ -2022,39 +1737,57 @@ + # ---------------------- + # Check for linker boilerplate output or warnings with + # the simple link test code. +-AC_DEFUN([_LT_LINKER_BOILERPLATE], +-[AC_REQUIRE([LT_AC_PROG_SED])dnl ++m4_defun([_LT_LINKER_BOILERPLATE], ++[m4_require([_LT_DECL_SED])dnl + ac_outfile=conftest.$ac_objext + echo "$lt_simple_link_test_code" >conftest.$ac_ext + eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err + _lt_linker_boilerplate=`cat conftest.err` +-$rm -r conftest* ++$RM -r conftest* + ])# _LT_LINKER_BOILERPLATE + + # _LT_REQUIRED_DARWIN_CHECKS +-# -------------------------- +-# Check for some things on darwin +-AC_DEFUN([_LT_REQUIRED_DARWIN_CHECKS],[ ++# ------------------------- ++m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[ + case $host_os in + rhapsody* | darwin*) + AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:]) + AC_CHECK_TOOL([NMEDIT], [nmedit], [:]) ++ AC_CHECK_TOOL([LIPO], [lipo], [:]) ++ AC_CHECK_TOOL([OTOOL], [otool], [:]) ++ AC_CHECK_TOOL([OTOOL64], [otool64], [:]) ++ _LT_DECL([], [DSYMUTIL], [1], ++ [Tool to manipulate archived DWARF debug symbol files on Mac OS X]) ++ _LT_DECL([], [NMEDIT], [1], ++ [Tool to change global to local symbols on Mac OS X]) ++ _LT_DECL([], [LIPO], [1], ++ [Tool to manipulate fat objects and archives on Mac OS X]) ++ _LT_DECL([], [OTOOL], [1], ++ [ldd/readelf like tool for Mach-O binaries on Mac OS X]) ++ _LT_DECL([], [OTOOL64], [1], ++ [ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4]) + + AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod], + [lt_cv_apple_cc_single_mod=no + if test -z "${LT_MULTI_MODULE}"; then +- # By default we will add the -single_module flag. You can override +- # by either setting the environment variable LT_MULTI_MODULE +- # non-empty at configure time, or by adding -multi_module to the +- # link flags. +- echo "int foo(void){return 1;}" > conftest.c +- $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ +- -dynamiclib ${wl}-single_module conftest.c +- if test -f libconftest.dylib; then +- lt_cv_apple_cc_single_mod=yes +- rm -rf libconftest.dylib* +- fi +- rm conftest.c ++ # By default we will add the -single_module flag. You can override ++ # by either setting the environment variable LT_MULTI_MODULE ++ # non-empty at configure time, or by adding -multi_module to the ++ # link flags. ++ rm -rf libconftest.dylib* ++ echo "int foo(void){return 1;}" > conftest.c ++ echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ ++-dynamiclib -Wl,-single_module conftest.c" >&AS_MESSAGE_LOG_FD ++ $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ ++ -dynamiclib -Wl,-single_module conftest.c 2>conftest.err ++ _lt_result=$? ++ if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then ++ lt_cv_apple_cc_single_mod=yes ++ else ++ cat conftest.err >&AS_MESSAGE_LOG_FD ++ fi ++ rm -rf libconftest.dylib* ++ rm -f conftest.* + fi]) + AC_CACHE_CHECK([for -exported_symbols_list linker flag], + [lt_cv_ld_exported_symbols_list], +@@ -2063,26 +1796,26 @@ + echo "_main" > conftest.sym + LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" + AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])], +- [lt_cv_ld_exported_symbols_list=yes], +- [lt_cv_ld_exported_symbols_list=no]) +- LDFLAGS="$save_LDFLAGS" ++ [lt_cv_ld_exported_symbols_list=yes], ++ [lt_cv_ld_exported_symbols_list=no]) ++ LDFLAGS="$save_LDFLAGS" + ]) + case $host_os in +- rhapsody* | darwin1.[[0123]]) ++ rhapsody* | darwin1.[[012]]) + _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; + darwin1.*) +- _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; +- darwin*) ++ _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; ++ darwin*) # darwin 5.x on + # if running on 10.5 or later, the deployment target defaults + # to the OS version, if on x86, and 10.4, the deployment +- # target defaults to 10.4. Don't you love it? ++ # target defaults to 10.4. Don't you love it? + case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in +- 10.0,*86*-darwin8*|10.0,*-darwin[[91]]*) +- _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; +- 10.[[012]]*) +- _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; +- 10.*) +- _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; ++ 10.0,*86*-darwin8*|10.0,*-darwin[[91]]*) ++ _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; ++ 10.[[012]]*) ++ _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; ++ 10.*) ++ _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; + esac + ;; + esac +@@ -2092,10 +1825,10 @@ + if test "$lt_cv_ld_exported_symbols_list" = "yes"; then + _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym' + else +- _lt_dar_export_syms="~$NMEDIT -s \$output_objdir/\${libname}-symbols.expsym \${lib}" ++ _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}' + fi + if test "$DSYMUTIL" != ":"; then +- _lt_dsymutil="~$DSYMUTIL \$lib || :" ++ _lt_dsymutil='~$DSYMUTIL $lib || :' + else + _lt_dsymutil= + fi +@@ -2103,16 +1836,47 @@ + esac + ]) + +-# _LT_AC_SYS_LIBPATH_AIX +-# ---------------------- ++ ++# _LT_DARWIN_LINKER_FEATURES ++# -------------------------- ++# Checks for linker and compiler features on darwin ++m4_defun([_LT_DARWIN_LINKER_FEATURES], ++[ ++ m4_require([_LT_REQUIRED_DARWIN_CHECKS]) ++ _LT_TAGVAR(archive_cmds_need_lc, $1)=no ++ _LT_TAGVAR(hardcode_direct, $1)=no ++ _LT_TAGVAR(hardcode_automatic, $1)=yes ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported ++ _LT_TAGVAR(whole_archive_flag_spec, $1)='' ++ _LT_TAGVAR(link_all_deplibs, $1)=yes ++ _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined" ++ if test "$GCC" = "yes"; then ++ output_verbose_link_cmd=echo ++ _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" ++ _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" ++ _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" ++ _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" ++ m4_if([$1], [CXX], ++[ if test "$lt_cv_apple_cc_single_mod" != "yes"; then ++ _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}" ++ _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}" ++ fi ++],[]) ++ else ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ fi ++]) ++ ++# _LT_SYS_MODULE_PATH_AIX ++# ----------------------- + # Links a minimal program and checks the executable + # for the system default hardcoded library path. In most cases, + # this is /usr/lib:/lib, but when the MPI compilers are used + # the location of the communication and MPI libs are included too. + # If we don't find anything, use the default library path according + # to the aix ld manual. +-AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX], +-[AC_REQUIRE([LT_AC_PROG_SED])dnl ++m4_defun([_LT_SYS_MODULE_PATH_AIX], ++[m4_require([_LT_DECL_SED])dnl + AC_LINK_IFELSE(AC_LANG_PROGRAM,[ + lt_aix_libpath_sed=' + /Import File Strings/,/^$/ { +@@ -2127,45 +1891,45 @@ + aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + fi],[]) + if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi +-])# _LT_AC_SYS_LIBPATH_AIX ++])# _LT_SYS_MODULE_PATH_AIX + + +-# _LT_AC_SHELL_INIT(ARG) +-# ---------------------- +-AC_DEFUN([_LT_AC_SHELL_INIT], ++# _LT_SHELL_INIT(ARG) ++# ------------------- ++m4_define([_LT_SHELL_INIT], + [ifdef([AC_DIVERSION_NOTICE], + [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)], + [AC_DIVERT_PUSH(NOTICE)]) + $1 + AC_DIVERT_POP +-])# _LT_AC_SHELL_INIT ++])# _LT_SHELL_INIT + + +-# _LT_AC_PROG_ECHO_BACKSLASH +-# -------------------------- ++# _LT_PROG_ECHO_BACKSLASH ++# ----------------------- + # Add some code to the start of the generated configure script which + # will find an echo command which doesn't interpret backslashes. +-AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH], +-[_LT_AC_SHELL_INIT([ ++m4_defun([_LT_PROG_ECHO_BACKSLASH], ++[_LT_SHELL_INIT([ + # Check that we are running under the correct shell. + SHELL=${CONFIG_SHELL-/bin/sh} + +-case X$ECHO in ++case X$lt_ECHO in + X*--fallback-echo) + # Remove one level of quotation (which was required for Make). +- ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','` ++ ECHO=`echo "$lt_ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','` + ;; + esac + +-echo=${ECHO-echo} ++ECHO=${lt_ECHO-echo} + if test "X[$]1" = X--no-reexec; then + # Discard the --no-reexec flag, and continue. + shift + elif test "X[$]1" = X--fallback-echo; then + # Avoid inline document here, it may be left over + : +-elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then +- # Yippee, $echo works! ++elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' ; then ++ # Yippee, $ECHO works! + : + else + # Restart under the correct shell. +@@ -2175,9 +1939,9 @@ + if test "X[$]1" = X--fallback-echo; then + # used as fallback echo + shift +- cat </dev/null 2>&1 && unset CDPATH + +-if test -z "$ECHO"; then +-if test "X${echo_test_string+set}" != Xset; then +-# find a string as large as possible, as long as the shell can cope with it +- for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do +- # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... +- if (echo_test_string=`eval $cmd`) 2>/dev/null && +- echo_test_string=`eval $cmd` && +- (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null +- then +- break +- fi +- done +-fi ++if test -z "$lt_ECHO"; then ++ if test "X${echo_test_string+set}" != Xset; then ++ # find a string as large as possible, as long as the shell can cope with it ++ for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do ++ # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... ++ if { echo_test_string=`eval $cmd`; } 2>/dev/null && ++ { test "X$echo_test_string" = "X$echo_test_string"; } 2>/dev/null ++ then ++ break ++ fi ++ done ++ fi + +-if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && +- echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && +- test "X$echo_testing_string" = "X$echo_test_string"; then +- : +-else +- # The Solaris, AIX, and Digital Unix default echo programs unquote +- # backslashes. This makes it impossible to quote backslashes using +- # echo "$something" | sed 's/\\/\\\\/g' +- # +- # So, first we look for a working echo in the user's PATH. ++ if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' && ++ echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` && ++ test "X$echo_testing_string" = "X$echo_test_string"; then ++ : ++ else ++ # The Solaris, AIX, and Digital Unix default echo programs unquote ++ # backslashes. This makes it impossible to quote backslashes using ++ # echo "$something" | sed 's/\\/\\\\/g' ++ # ++ # So, first we look for a working echo in the user's PATH. + +- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR +- for dir in $PATH /usr/ucb; do ++ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR ++ for dir in $PATH /usr/ucb; do ++ IFS="$lt_save_ifs" ++ if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && ++ test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && ++ echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && ++ test "X$echo_testing_string" = "X$echo_test_string"; then ++ ECHO="$dir/echo" ++ break ++ fi ++ done + IFS="$lt_save_ifs" +- if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && +- test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && +- echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && +- test "X$echo_testing_string" = "X$echo_test_string"; then +- echo="$dir/echo" +- break +- fi +- done +- IFS="$lt_save_ifs" + +- if test "X$echo" = Xecho; then +- # We didn't find a better echo, so look for alternatives. +- if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' && +- echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` && +- test "X$echo_testing_string" = "X$echo_test_string"; then +- # This shell has a builtin print -r that does the trick. +- echo='print -r' +- elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) && +- test "X$CONFIG_SHELL" != X/bin/ksh; then +- # If we have ksh, try running configure again with it. +- ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} +- export ORIGINAL_CONFIG_SHELL +- CONFIG_SHELL=/bin/ksh +- export CONFIG_SHELL +- exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"} +- else +- # Try using printf. +- echo='printf %s\n' +- if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && +- echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && +- test "X$echo_testing_string" = "X$echo_test_string"; then +- # Cool, printf works +- : +- elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && +- test "X$echo_testing_string" = 'X\t' && +- echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && +- test "X$echo_testing_string" = "X$echo_test_string"; then +- CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL +- export CONFIG_SHELL +- SHELL="$CONFIG_SHELL" +- export SHELL +- echo="$CONFIG_SHELL [$]0 --fallback-echo" +- elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && +- test "X$echo_testing_string" = 'X\t' && +- echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && +- test "X$echo_testing_string" = "X$echo_test_string"; then +- echo="$CONFIG_SHELL [$]0 --fallback-echo" ++ if test "X$ECHO" = Xecho; then ++ # We didn't find a better echo, so look for alternatives. ++ if test "X`{ print -r '\t'; } 2>/dev/null`" = 'X\t' && ++ echo_testing_string=`{ print -r "$echo_test_string"; } 2>/dev/null` && ++ test "X$echo_testing_string" = "X$echo_test_string"; then ++ # This shell has a builtin print -r that does the trick. ++ ECHO='print -r' ++ elif { test -f /bin/ksh || test -f /bin/ksh$ac_exeext; } && ++ test "X$CONFIG_SHELL" != X/bin/ksh; then ++ # If we have ksh, try running configure again with it. ++ ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} ++ export ORIGINAL_CONFIG_SHELL ++ CONFIG_SHELL=/bin/ksh ++ export CONFIG_SHELL ++ exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"} + else +- # maybe with a smaller string... +- prev=: ++ # Try using printf. ++ ECHO='printf %s\n' ++ if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' && ++ echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` && ++ test "X$echo_testing_string" = "X$echo_test_string"; then ++ # Cool, printf works ++ : ++ elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && ++ test "X$echo_testing_string" = 'X\t' && ++ echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && ++ test "X$echo_testing_string" = "X$echo_test_string"; then ++ CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL ++ export CONFIG_SHELL ++ SHELL="$CONFIG_SHELL" ++ export SHELL ++ ECHO="$CONFIG_SHELL [$]0 --fallback-echo" ++ elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && ++ test "X$echo_testing_string" = 'X\t' && ++ echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && ++ test "X$echo_testing_string" = "X$echo_test_string"; then ++ ECHO="$CONFIG_SHELL [$]0 --fallback-echo" ++ else ++ # maybe with a smaller string... ++ prev=: + +- for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do +- if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null +- then +- break +- fi +- prev="$cmd" +- done ++ for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do ++ if { test "X$echo_test_string" = "X`eval $cmd`"; } 2>/dev/null ++ then ++ break ++ fi ++ prev="$cmd" ++ done + +- if test "$prev" != 'sed 50q "[$]0"'; then +- echo_test_string=`eval $prev` +- export echo_test_string +- exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"} +- else +- # Oops. We lost completely, so just stick with echo. +- echo=echo +- fi ++ if test "$prev" != 'sed 50q "[$]0"'; then ++ echo_test_string=`eval $prev` ++ export echo_test_string ++ exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"} ++ else ++ # Oops. We lost completely, so just stick with echo. ++ ECHO=echo ++ fi ++ fi + fi + fi + fi + fi +-fi + + # Copy echo and quote the copy suitably for passing to libtool from + # the Makefile, instead of quoting the original, which is used later. +-ECHO=$echo +-if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then +- ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo" ++lt_ECHO=$ECHO ++if test "X$lt_ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then ++ lt_ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo" + fi + +-AC_SUBST(ECHO) +-])])# _LT_AC_PROG_ECHO_BACKSLASH ++AC_SUBST(lt_ECHO) ++]) ++_LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts]) ++_LT_DECL([], [ECHO], [1], ++ [An echo program that does not interpret backslashes]) ++])# _LT_PROG_ECHO_BACKSLASH + + +-# _LT_AC_LOCK +-# ----------- +-AC_DEFUN([_LT_AC_LOCK], ++# _LT_ENABLE_LOCK ++# --------------- ++m4_defun([_LT_ENABLE_LOCK], + [AC_ARG_ENABLE([libtool-lock], +- [AC_HELP_STRING([--disable-libtool-lock], +- [avoid locking (might break parallel builds)])]) ++ [AS_HELP_STRING([--disable-libtool-lock], ++ [avoid locking (might break parallel builds)])]) + test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes + + # Some flags need to be propagated to the compiler or linker for good +@@ -2313,12 +2080,12 @@ + echo 'int i;' > conftest.$ac_ext + if AC_TRY_EVAL(ac_compile); then + case `/usr/bin/file conftest.$ac_objext` in +- *ELF-32*) +- HPUX_IA64_MODE="32" +- ;; +- *ELF-64*) +- HPUX_IA64_MODE="64" +- ;; ++ *ELF-32*) ++ HPUX_IA64_MODE="32" ++ ;; ++ *ELF-64*) ++ HPUX_IA64_MODE="64" ++ ;; + esac + fi + rm -rf conftest* +@@ -2327,80 +2094,79 @@ + # Find out which ABI we are using. + echo '[#]line __oline__ "configure"' > conftest.$ac_ext + if AC_TRY_EVAL(ac_compile); then +- if test "$lt_cv_prog_gnu_ld" = yes; then +- case `/usr/bin/file conftest.$ac_objext` in +- *32-bit*) +- LD="${LD-ld} -melf32bsmip" +- ;; +- *N32*) +- LD="${LD-ld} -melf32bmipn32" +- ;; +- *64-bit*) +- LD="${LD-ld} -melf64bmip" +- ;; +- esac +- else +- case `/usr/bin/file conftest.$ac_objext` in +- *32-bit*) +- LD="${LD-ld} -32" +- ;; +- *N32*) +- LD="${LD-ld} -n32" +- ;; +- *64-bit*) +- LD="${LD-ld} -64" +- ;; +- esac +- fi ++ if test "$lt_cv_prog_gnu_ld" = yes; then ++ case `/usr/bin/file conftest.$ac_objext` in ++ *32-bit*) ++ LD="${LD-ld} -melf32bsmip" ++ ;; ++ *N32*) ++ LD="${LD-ld} -melf32bmipn32" ++ ;; ++ *64-bit*) ++ LD="${LD-ld} -melf64bmip" ++ ;; ++ esac ++ else ++ case `/usr/bin/file conftest.$ac_objext` in ++ *32-bit*) ++ LD="${LD-ld} -32" ++ ;; ++ *N32*) ++ LD="${LD-ld} -n32" ++ ;; ++ *64-bit*) ++ LD="${LD-ld} -64" ++ ;; ++ esac ++ fi + fi + rm -rf conftest* + ;; + + x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \ +-s390*-*linux*|sparc*-*linux*) ++s390*-*linux*|s390*-*tpf*|sparc*-*linux*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if AC_TRY_EVAL(ac_compile); then + case `/usr/bin/file conftest.o` in +- *32-bit*) +- case $host in +- x86_64-*kfreebsd*-gnu) +- LD="${LD-ld} -m elf_i386_fbsd" +- ;; +- x86_64-*linux*) +- LD="${LD-ld} -m elf_i386" +- ;; +- ppc64-*linux*|powerpc64-*linux*) +- LD="${LD-ld} -m elf32ppclinux" +- ;; +- s390x-*linux*) +- LD="${LD-ld} -m elf_s390" +- ;; +- sparc64-*linux*) +- LD="${LD-ld} -m elf32_sparc" +- ;; +- esac +- ;; +- *64-bit*) +- libsuff=64 +- case $host in +- x86_64-*kfreebsd*-gnu) +- LD="${LD-ld} -m elf_x86_64_fbsd" +- ;; +- x86_64-*linux*) +- LD="${LD-ld} -m elf_x86_64" +- ;; +- ppc*-*linux*|powerpc*-*linux*) +- LD="${LD-ld} -m elf64ppc" +- ;; +- s390*-*linux*) +- LD="${LD-ld} -m elf64_s390" +- ;; +- sparc*-*linux*) +- LD="${LD-ld} -m elf64_sparc" +- ;; +- esac +- ;; ++ *32-bit*) ++ case $host in ++ x86_64-*kfreebsd*-gnu) ++ LD="${LD-ld} -m elf_i386_fbsd" ++ ;; ++ x86_64-*linux*) ++ LD="${LD-ld} -m elf_i386" ++ ;; ++ ppc64-*linux*|powerpc64-*linux*) ++ LD="${LD-ld} -m elf32ppclinux" ++ ;; ++ s390x-*linux*) ++ LD="${LD-ld} -m elf_s390" ++ ;; ++ sparc64-*linux*) ++ LD="${LD-ld} -m elf32_sparc" ++ ;; ++ esac ++ ;; ++ *64-bit*) ++ case $host in ++ x86_64-*kfreebsd*-gnu) ++ LD="${LD-ld} -m elf_x86_64_fbsd" ++ ;; ++ x86_64-*linux*) ++ LD="${LD-ld} -m elf_x86_64" ++ ;; ++ ppc*-*linux*|powerpc*-*linux*) ++ LD="${LD-ld} -m elf64ppc" ++ ;; ++ s390*-*linux*|s390*-*tpf*) ++ LD="${LD-ld} -m elf64_s390" ++ ;; ++ sparc*-*linux*) ++ LD="${LD-ld} -m elf64_sparc" ++ ;; ++ esac ++ ;; + esac + fi + rm -rf conftest* +@@ -2412,7 +2178,7 @@ + CFLAGS="$CFLAGS -belf" + AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, + [AC_LANG_PUSH(C) +- AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no]) ++ AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no]) + AC_LANG_POP]) + if test x"$lt_cv_cc_needs_belf" != x"yes"; then + # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf +@@ -2428,7 +2194,7 @@ + case $lt_cv_prog_gnu_ld in + yes*) LD="${LD-ld} -m elf64_sparc" ;; + *) +- if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then ++ if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then + LD="${LD-ld} -64" + fi + ;; +@@ -2438,30 +2204,63 @@ + fi + rm -rf conftest* + ;; +- +-AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL], +-[*-*-cygwin* | *-*-mingw* | *-*-pw32*) +- AC_CHECK_TOOL(DLLTOOL, dlltool, false) +- AC_CHECK_TOOL(AS, as, false) +- AC_CHECK_TOOL(OBJDUMP, objdump, false) +- ;; +- ]) + esac + + need_locks="$enable_libtool_lock" ++])# _LT_ENABLE_LOCK ++ ++ ++# _LT_CMD_OLD_ARCHIVE ++# ------------------- ++m4_defun([_LT_CMD_OLD_ARCHIVE], ++[AC_CHECK_TOOL(AR, ar, false) ++test -z "$AR" && AR=ar ++test -z "$AR_FLAGS" && AR_FLAGS=cru ++_LT_DECL([], [AR], [1], [The archiver]) ++_LT_DECL([], [AR_FLAGS], [1]) ++ ++AC_CHECK_TOOL(STRIP, strip, :) ++test -z "$STRIP" && STRIP=: ++_LT_DECL([], [STRIP], [1], [A symbol stripping program]) ++ ++AC_CHECK_TOOL(RANLIB, ranlib, :) ++test -z "$RANLIB" && RANLIB=: ++_LT_DECL([], [RANLIB], [1], ++ [Commands used to install an old-style archive]) ++ ++# Determine commands to create old-style static archives. ++old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' ++old_postinstall_cmds='chmod 644 $oldlib' ++old_postuninstall_cmds= + +-])# _LT_AC_LOCK ++if test -n "$RANLIB"; then ++ case $host_os in ++ openbsd*) ++ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib" ++ ;; ++ *) ++ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib" ++ ;; ++ esac ++ old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" ++fi ++_LT_DECL([], [old_postinstall_cmds], [2]) ++_LT_DECL([], [old_postuninstall_cmds], [2]) ++_LT_TAGDECL([], [old_archive_cmds], [2], ++ [Commands used to build an old-style archive]) ++])# _LT_CMD_OLD_ARCHIVE + + +-# AC_LIBTOOL_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, ++# _LT_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, + # [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE]) + # ---------------------------------------------------------------- + # Check whether the given compiler option works +-AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], +-[AC_REQUIRE([LT_AC_PROG_SED]) ++AC_DEFUN([_LT_COMPILER_OPTION], ++[m4_require([_LT_FILEUTILS_DEFAULTS])dnl ++m4_require([_LT_DECL_SED])dnl + AC_CACHE_CHECK([$1], [$2], + [$2=no +- ifelse([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4]) ++ m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4]) + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="$3" + # Insert the option either (1) after the last *FLAGS variable, or +@@ -2481,29 +2280,35 @@ + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings other than the usual output. +- $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp ++ $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then + $2=yes + fi + fi +- $rm conftest* ++ $RM conftest* + ]) + + if test x"[$]$2" = xyes; then +- ifelse([$5], , :, [$5]) ++ m4_if([$5], , :, [$5]) + else +- ifelse([$6], , :, [$6]) ++ m4_if([$6], , :, [$6]) + fi +-])# AC_LIBTOOL_COMPILER_OPTION +- ++])# _LT_COMPILER_OPTION + +-# AC_LIBTOOL_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, +-# [ACTION-SUCCESS], [ACTION-FAILURE]) +-# ------------------------------------------------------------ +-# Check whether the given compiler option works +-AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], +-[AC_REQUIRE([LT_AC_PROG_SED])dnl ++# Old name: ++AU_ALIAS([AC_LIBTOOL_COMPILER_OPTION], [_LT_COMPILER_OPTION]) ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], []) ++ ++ ++# _LT_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, ++# [ACTION-SUCCESS], [ACTION-FAILURE]) ++# ---------------------------------------------------- ++# Check whether the given linker option works ++AC_DEFUN([_LT_LINKER_OPTION], ++[m4_require([_LT_FILEUTILS_DEFAULTS])dnl ++m4_require([_LT_DECL_SED])dnl + AC_CACHE_CHECK([$1], [$2], + [$2=no + save_LDFLAGS="$LDFLAGS" +@@ -2515,7 +2320,7 @@ + if test -s conftest.err; then + # Append any errors to the config.log. + cat conftest.err 1>&AS_MESSAGE_LOG_FD +- $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp ++ $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if diff conftest.exp conftest.er2 >/dev/null; then + $2=yes +@@ -2524,22 +2329,28 @@ + $2=yes + fi + fi +- $rm -r conftest* ++ $RM -r conftest* + LDFLAGS="$save_LDFLAGS" + ]) + + if test x"[$]$2" = xyes; then +- ifelse([$4], , :, [$4]) ++ m4_if([$4], , :, [$4]) + else +- ifelse([$5], , :, [$5]) ++ m4_if([$5], , :, [$5]) + fi +-])# AC_LIBTOOL_LINKER_OPTION ++])# _LT_LINKER_OPTION + ++# Old name: ++AU_ALIAS([AC_LIBTOOL_LINKER_OPTION], [_LT_LINKER_OPTION]) ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], []) + +-# AC_LIBTOOL_SYS_MAX_CMD_LEN +-# -------------------------- +-AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], +-[# find the maximum length of command line arguments ++ ++# LT_CMD_MAX_LEN ++#--------------- ++AC_DEFUN([LT_CMD_MAX_LEN], ++[AC_REQUIRE([AC_CANONICAL_HOST])dnl ++# find the maximum length of command line arguments + AC_MSG_CHECKING([the maximum length of command line arguments]) + AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl + i=0 +@@ -2616,7 +2427,7 @@ + sysv5* | sco5v6* | sysv4.2uw2*) + kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` + if test -n "$kargmax"; then +- lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'` ++ lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'` + else + lt_cv_sys_max_cmd_len=32768 + fi +@@ -2627,20 +2438,28 @@ + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` + else ++ # Make teststring a little bigger before we do anything with it. ++ # a 1K string should be a reasonable start. ++ for i in 1 2 3 4 5 6 7 8 ; do ++ teststring=$teststring$teststring ++ done + SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} +- while (test "X"`$SHELL [$]0 --fallback-echo "X$teststring" 2>/dev/null` \ +- = "XX$teststring") >/dev/null 2>&1 && +- new_result=`expr "X$teststring" : ".*" 2>&1` && +- lt_cv_sys_max_cmd_len=$new_result && ++ # If test is not a shell built-in, we'll probably end up computing a ++ # maximum length that is only half of the actual maximum length, but ++ # we can't tell. ++ while { test "X"`$SHELL [$]0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \ ++ = "XX$teststring$teststring"; } >/dev/null 2>&1 && + test $i != 17 # 1/2 MB should be enough + do + i=`expr $i + 1` + teststring=$teststring$teststring + done ++ # Only check the string length outside the loop. ++ lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1` + teststring= +- # Add a significant safety factor because C++ compilers can tack on massive +- # amounts of additional arguments before passing them to the linker. +- # It appears as though 1/2 is a usable value. ++ # Add a significant safety factor because C++ compilers can tack on ++ # massive amounts of additional arguments before passing them to the ++ # linker. It appears as though 1/2 is a usable value. + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` + fi + ;; +@@ -2651,27 +2470,35 @@ + else + AC_MSG_RESULT(none) + fi +-])# AC_LIBTOOL_SYS_MAX_CMD_LEN ++max_cmd_len=$lt_cv_sys_max_cmd_len ++_LT_DECL([], [max_cmd_len], [0], ++ [What is the maximum length of a command?]) ++])# LT_CMD_MAX_LEN + ++# Old name: ++AU_ALIAS([AC_LIBTOOL_SYS_MAX_CMD_LEN], [LT_CMD_MAX_LEN]) ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], []) + +-# _LT_AC_CHECK_DLFCN +-# ------------------ +-AC_DEFUN([_LT_AC_CHECK_DLFCN], +-[AC_CHECK_HEADERS(dlfcn.h)dnl +-])# _LT_AC_CHECK_DLFCN ++ ++# _LT_HEADER_DLFCN ++# ---------------- ++m4_defun([_LT_HEADER_DLFCN], ++[AC_CHECK_HEADERS([dlfcn.h], [], [], [AC_INCLUDES_DEFAULT])dnl ++])# _LT_HEADER_DLFCN + + +-# _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE, +-# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING) +-# --------------------------------------------------------------------- +-AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF], +-[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl ++# _LT_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE, ++# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING) ++# ---------------------------------------------------------------- ++m4_defun([_LT_TRY_DLOPEN_SELF], ++[m4_require([_LT_HEADER_DLFCN])dnl + if test "$cross_compiling" = yes; then : + [$4] + else + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown +- cat > conftest.$ac_ext < conftest.$ac_ext <<_LT_EOF + [#line __oline__ "configure" + #include "confdefs.h" + +@@ -2734,7 +2561,7 @@ + + exit (status); + }] +-EOF ++_LT_EOF + if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then + (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null + lt_status=$? +@@ -2749,13 +2576,13 @@ + fi + fi + rm -fr conftest* +-])# _LT_AC_TRY_DLOPEN_SELF ++])# _LT_TRY_DLOPEN_SELF + + +-# AC_LIBTOOL_DLOPEN_SELF +-# ---------------------- +-AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], +-[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl ++# LT_SYS_DLOPEN_SELF ++# ------------------ ++AC_DEFUN([LT_SYS_DLOPEN_SELF], ++[m4_require([_LT_HEADER_DLFCN])dnl + if test "x$enable_dlopen" != xyes; then + enable_dlopen=unknown + enable_dlopen_self=unknown +@@ -2774,12 +2601,12 @@ + mingw* | pw32*) + lt_cv_dlopen="LoadLibrary" + lt_cv_dlopen_libs= +- ;; ++ ;; + + cygwin*) + lt_cv_dlopen="dlopen" + lt_cv_dlopen_libs= +- ;; ++ ;; + + darwin*) + # if libdl is installed we need to link against it +@@ -2789,7 +2616,7 @@ + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + ]) +- ;; ++ ;; + + *) + AC_CHECK_FUNC([shl_load], +@@ -2831,7 +2658,7 @@ + + AC_CACHE_CHECK([whether a program can dlopen itself], + lt_cv_dlopen_self, [dnl +- _LT_AC_TRY_DLOPEN_SELF( ++ _LT_TRY_DLOPEN_SELF( + lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes, + lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross) + ]) +@@ -2839,8 +2666,8 @@ + if test "x$lt_cv_dlopen_self" = xyes; then + wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" + AC_CACHE_CHECK([whether a statically linked program can dlopen itself], +- lt_cv_dlopen_self_static, [dnl +- _LT_AC_TRY_DLOPEN_SELF( ++ lt_cv_dlopen_self_static, [dnl ++ _LT_TRY_DLOPEN_SELF( + lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes, + lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross) + ]) +@@ -2862,19 +2689,32 @@ + *) enable_dlopen_self_static=unknown ;; + esac + fi +-])# AC_LIBTOOL_DLOPEN_SELF ++_LT_DECL([dlopen_support], [enable_dlopen], [0], ++ [Whether dlopen is supported]) ++_LT_DECL([dlopen_self], [enable_dlopen_self], [0], ++ [Whether dlopen of programs is supported]) ++_LT_DECL([dlopen_self_static], [enable_dlopen_self_static], [0], ++ [Whether dlopen of statically linked programs is supported]) ++])# LT_SYS_DLOPEN_SELF ++ ++# Old name: ++AU_ALIAS([AC_LIBTOOL_DLOPEN_SELF], [LT_SYS_DLOPEN_SELF]) ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], []) + + +-# AC_LIBTOOL_PROG_CC_C_O([TAGNAME]) +-# --------------------------------- +-# Check to see if options -c and -o are simultaneously supported by compiler +-AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O], +-[AC_REQUIRE([LT_AC_PROG_SED])dnl +-AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl ++# _LT_COMPILER_C_O([TAGNAME]) ++# --------------------------- ++# Check to see if options -c and -o are simultaneously supported by compiler. ++# This macro does not hard code the compiler like AC_PROG_CC_C_O. ++m4_defun([_LT_COMPILER_C_O], ++[m4_require([_LT_DECL_SED])dnl ++m4_require([_LT_FILEUTILS_DEFAULTS])dnl ++m4_require([_LT_TAG_COMPILER])dnl + AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext], +- [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)], +- [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no +- $rm -r conftest 2>/dev/null ++ [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)], ++ [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no ++ $RM -r conftest 2>/dev/null + mkdir conftest + cd conftest + mkdir out +@@ -2898,37 +2738,41 @@ + then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings +- $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp ++ $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp + $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 + if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then +- _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes ++ _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes + fi + fi + chmod u+w . 2>&AS_MESSAGE_LOG_FD +- $rm conftest* ++ $RM conftest* + # SGI C++ compiler will create directory out/ii_files/ for + # template instantiation +- test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files +- $rm out/* && rmdir out ++ test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files ++ $RM out/* && rmdir out + cd .. +- rmdir conftest +- $rm conftest* ++ $RM -r conftest ++ $RM conftest* + ]) +-])# AC_LIBTOOL_PROG_CC_C_O ++_LT_TAGDECL([compiler_c_o], [lt_cv_prog_compiler_c_o], [1], ++ [Does compiler simultaneously support -c and -o options?]) ++])# _LT_COMPILER_C_O + + +-# AC_LIBTOOL_SYS_HARD_LINK_LOCKS([TAGNAME]) +-# ----------------------------------------- ++# _LT_COMPILER_FILE_LOCKS([TAGNAME]) ++# ---------------------------------- + # Check to see if we can do hard links to lock some files if needed +-AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], +-[AC_REQUIRE([_LT_AC_LOCK])dnl ++m4_defun([_LT_COMPILER_FILE_LOCKS], ++[m4_require([_LT_ENABLE_LOCK])dnl ++m4_require([_LT_FILEUTILS_DEFAULTS])dnl ++_LT_COMPILER_C_O([$1]) + + hard_links="nottested" +-if test "$_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then ++if test "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then + # do not overwrite the value of need_locks provided by the user + AC_MSG_CHECKING([if we can lock with hard links]) + hard_links=yes +- $rm conftest* ++ $RM conftest* + ln conftest.a conftest.b 2>/dev/null && hard_links=no + touch conftest.a + ln conftest.a conftest.b 2>&5 || hard_links=no +@@ -2941,12 +2785,13 @@ + else + need_locks=no + fi +-])# AC_LIBTOOL_SYS_HARD_LINK_LOCKS ++_LT_DECL([], [need_locks], [1], [Must we lock files when doing compilation?]) ++])# _LT_COMPILER_FILE_LOCKS + + +-# AC_LIBTOOL_OBJDIR +-# ----------------- +-AC_DEFUN([AC_LIBTOOL_OBJDIR], ++# _LT_CHECK_OBJDIR ++# ---------------- ++m4_defun([_LT_CHECK_OBJDIR], + [AC_CACHE_CHECK([for objdir], [lt_cv_objdir], + [rm -f .libs 2>/dev/null + mkdir .libs 2>/dev/null +@@ -2958,40 +2803,46 @@ + fi + rmdir .libs 2>/dev/null]) + objdir=$lt_cv_objdir +-])# AC_LIBTOOL_OBJDIR ++_LT_DECL([], [objdir], [0], ++ [The name of the directory that contains temporary libtool files])dnl ++m4_pattern_allow([LT_OBJDIR])dnl ++AC_DEFINE_UNQUOTED(LT_OBJDIR, "$lt_cv_objdir/", ++ [Define to the sub-directory in which libtool stores uninstalled libraries.]) ++])# _LT_CHECK_OBJDIR + + +-# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH([TAGNAME]) +-# ---------------------------------------------- ++# _LT_LINKER_HARDCODE_LIBPATH([TAGNAME]) ++# -------------------------------------- + # Check hardcoding attributes. +-AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], ++m4_defun([_LT_LINKER_HARDCODE_LIBPATH], + [AC_MSG_CHECKING([how to hardcode library paths into programs]) +-_LT_AC_TAGVAR(hardcode_action, $1)= +-if test -n "$_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)" || \ +- test -n "$_LT_AC_TAGVAR(runpath_var, $1)" || \ +- test "X$_LT_AC_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then ++_LT_TAGVAR(hardcode_action, $1)= ++if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" || ++ test -n "$_LT_TAGVAR(runpath_var, $1)" || ++ test "X$_LT_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then + +- # We can hardcode non-existant directories. +- if test "$_LT_AC_TAGVAR(hardcode_direct, $1)" != no && ++ # We can hardcode non-existent directories. ++ if test "$_LT_TAGVAR(hardcode_direct, $1)" != no && + # If the only mechanism to avoid hardcoding is shlibpath_var, we + # have to relink, otherwise we might link with an installed library + # when we should be linking with a yet-to-be-installed one +- ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)" != no && +- test "$_LT_AC_TAGVAR(hardcode_minus_L, $1)" != no; then ++ ## test "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" != no && ++ test "$_LT_TAGVAR(hardcode_minus_L, $1)" != no; then + # Linking always hardcodes the temporary library directory. +- _LT_AC_TAGVAR(hardcode_action, $1)=relink ++ _LT_TAGVAR(hardcode_action, $1)=relink + else + # We can link without hardcoding, and we can hardcode nonexisting dirs. +- _LT_AC_TAGVAR(hardcode_action, $1)=immediate ++ _LT_TAGVAR(hardcode_action, $1)=immediate + fi + else + # We cannot hardcode anything, or else we can only hardcode existing + # directories. +- _LT_AC_TAGVAR(hardcode_action, $1)=unsupported ++ _LT_TAGVAR(hardcode_action, $1)=unsupported + fi +-AC_MSG_RESULT([$_LT_AC_TAGVAR(hardcode_action, $1)]) ++AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)]) + +-if test "$_LT_AC_TAGVAR(hardcode_action, $1)" = relink; then ++if test "$_LT_TAGVAR(hardcode_action, $1)" = relink || ++ test "$_LT_TAGVAR(inherit_rpath, $1)" = yes; then + # Fast installation is not supported + enable_fast_install=no + elif test "$shlibpath_overrides_runpath" = yes || +@@ -2999,73 +2850,69 @@ + # Fast installation is not necessary + enable_fast_install=needless + fi +-])# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH ++_LT_TAGDECL([], [hardcode_action], [0], ++ [How to hardcode a shared library path into an executable]) ++])# _LT_LINKER_HARDCODE_LIBPATH + + +-# AC_LIBTOOL_SYS_LIB_STRIP +-# ------------------------ +-AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP], +-[striplib= ++# _LT_CMD_STRIPLIB ++# ---------------- ++m4_defun([_LT_CMD_STRIPLIB], ++[m4_require([_LT_DECL_EGREP]) ++striplib= + old_striplib= + AC_MSG_CHECKING([whether stripping libraries is possible]) +-if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then ++if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then + test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" + test -z "$striplib" && striplib="$STRIP --strip-unneeded" + AC_MSG_RESULT([yes]) + else + # FIXME - insert some real tests, host_os isn't really good enough + case $host_os in +- darwin*) +- if test -n "$STRIP" ; then +- striplib="$STRIP -x" +- old_striplib="$STRIP -S" +- AC_MSG_RESULT([yes]) +- else +- AC_MSG_RESULT([no]) +-fi +- ;; +- *) +- AC_MSG_RESULT([no]) ++ darwin*) ++ if test -n "$STRIP" ; then ++ striplib="$STRIP -x" ++ old_striplib="$STRIP -S" ++ AC_MSG_RESULT([yes]) ++ else ++ AC_MSG_RESULT([no]) ++ fi ++ ;; ++ *) ++ AC_MSG_RESULT([no]) + ;; + esac + fi +-])# AC_LIBTOOL_SYS_LIB_STRIP ++_LT_DECL([], [old_striplib], [1], [Commands to strip libraries]) ++_LT_DECL([], [striplib], [1]) ++])# _LT_CMD_STRIPLIB + + +-# AC_LIBTOOL_SYS_DYNAMIC_LINKER ++# _LT_SYS_DYNAMIC_LINKER([TAG]) + # ----------------------------- + # PORTME Fill in your ld.so characteristics +-AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER], +-[AC_REQUIRE([LT_AC_PROG_SED])dnl ++m4_defun([_LT_SYS_DYNAMIC_LINKER], ++[AC_REQUIRE([AC_CANONICAL_HOST])dnl ++m4_require([_LT_DECL_EGREP])dnl ++m4_require([_LT_FILEUTILS_DEFAULTS])dnl ++m4_require([_LT_DECL_SED])dnl + AC_MSG_CHECKING([dynamic linker characteristics]) +-library_names_spec= +-libname_spec='lib$name' +-soname_spec= +-shrext_cmds=".so" +-postinstall_cmds= +-postuninstall_cmds= +-finish_cmds= +-finish_eval= +-shlibpath_var= +-shlibpath_overrides_runpath=unknown +-version_type=none +-dynamic_linker="$host_os ld.so" +-sys_lib_dlsearch_path_spec="/lib /usr/lib" +-m4_if($1,[],[ ++m4_if([$1], ++ [], [ + if test "$GCC" = yes; then + case $host_os in + darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; + *) lt_awk_arg="/^libraries:/" ;; + esac + lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"` +- if echo "$lt_search_path_spec" | grep ';' >/dev/null ; then ++ if $ECHO "$lt_search_path_spec" | $GREP ';' >/dev/null ; then + # if the path contains ";" then we assume it to be the separator + # otherwise default to the standard path separator (i.e. ":") - it is + # assumed that no part of a normal pathname contains ";" but that should + # okay in the real world where ";" in dirpaths is itself problematic. +- lt_search_path_spec=`echo "$lt_search_path_spec" | $SED -e 's/;/ /g'` ++ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e 's/;/ /g'` + else +- lt_search_path_spec=`echo "$lt_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` ++ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi + # Ok, now we have the path, separated by spaces, we can step through it + # and add multilib dir if necessary. +@@ -3079,7 +2926,7 @@ + lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" + fi + done +- lt_search_path_spec=`echo $lt_tmp_lt_search_path_spec | awk ' ++ lt_search_path_spec=`$ECHO $lt_tmp_lt_search_path_spec | awk ' + BEGIN {RS=" "; FS="/|\n";} { + lt_foo=""; + lt_count=0; +@@ -3099,10 +2946,23 @@ + if (lt_foo != "") { lt_freq[[lt_foo]]++; } + if (lt_freq[[lt_foo]] == 1) { print lt_foo; } + }'` +- sys_lib_search_path_spec=`echo $lt_search_path_spec` ++ sys_lib_search_path_spec=`$ECHO $lt_search_path_spec` + else + sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" + fi]) ++library_names_spec= ++libname_spec='lib$name' ++soname_spec= ++shrext_cmds=".so" ++postinstall_cmds= ++postuninstall_cmds= ++finish_cmds= ++finish_eval= ++shlibpath_var= ++shlibpath_overrides_runpath=unknown ++version_type=none ++dynamic_linker="$host_os ld.so" ++sys_lib_dlsearch_path_spec="/lib /usr/lib" + need_lib_prefix=unknown + hardcode_into_libs=no + +@@ -3139,7 +2999,7 @@ + aix4 | aix4.[[01]] | aix4.[[01]].*) + if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' + echo ' yes ' +- echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then ++ echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then + : + else + can_build_shared=no +@@ -3165,9 +3025,18 @@ + ;; + + amigaos*) +- library_names_spec='$libname.ixlibrary $libname.a' +- # Create ${libname}_ixlibrary.a entries in /sys/libs. +- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' ++ case $host_cpu in ++ powerpc) ++ # Since July 2007 AmigaOS4 officially supports .so libraries. ++ # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ ;; ++ m68k) ++ library_names_spec='$libname.ixlibrary $libname.a' ++ # Create ${libname}_ixlibrary.a entries in /sys/libs. ++ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' ++ ;; ++ esac + ;; + + beos*) +@@ -3201,14 +3070,17 @@ + library_names_spec='$libname.dll.a' + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \${file}`~ +- dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ ++ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname~ +- chmod a+x \$dldir/$dlname' ++ chmod a+x \$dldir/$dlname~ ++ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then ++ eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; ++ fi' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ +- $rm \$dlpath' ++ $RM \$dlpath' + shlibpath_overrides_runpath=yes + + case $host_os in +@@ -3220,17 +3092,17 @@ + mingw*) + # MinGW DLLs use traditional 'lib' prefix + soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' +- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` +- if echo "$sys_lib_search_path_spec" | [grep ';[c-zC-Z]:/' >/dev/null]; then ++ sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` ++ if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then + # It is most probably a Windows format PATH printed by + # mingw gcc, but we are running on Cygwin. Gcc prints its search + # path with ; separators, and with drive letters. We can handle the + # drive letters (cygwin fileutils understands them), so leave them, + # especially as we might pass files found there to a mingw objdump, + # which wouldn't understand a cygwinified path. Ahh. +- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` ++ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` + else +- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` ++ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi + ;; + pw32*) +@@ -3254,13 +3126,13 @@ + version_type=darwin + need_lib_prefix=no + need_version=no +- library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext' ++ library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext' + soname_spec='${libname}${release}${major}$shared_ext' + shlibpath_overrides_runpath=yes + shlibpath_var=DYLD_LIBRARY_PATH + shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' +- m4_if([$1], [],[ +- sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"]) ++m4_if([$1], [],[ ++ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"]) + sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' + ;; + +@@ -3353,18 +3225,18 @@ + fi + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; +- hppa*64*) +- shrext_cmds='.sl' +- hardcode_into_libs=yes +- dynamic_linker="$host_os dld.sl" +- shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH +- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" +- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec +- ;; +- *) ++ hppa*64*) ++ shrext_cmds='.sl' ++ hardcode_into_libs=yes ++ dynamic_linker="$host_os dld.sl" ++ shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH ++ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" ++ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ++ ;; ++ *) + shrext_cmds='.sl' + dynamic_linker="$host_os dld.sl" + shlibpath_var=SHLIB_PATH +@@ -3441,17 +3313,26 @@ + finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no ++ # Some binutils ld are patched to set DT_RUNPATH ++ save_LDFLAGS=$LDFLAGS ++ save_libdir=$libdir ++ eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \ ++ LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\"" ++ AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])], ++ [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null], ++ [shlibpath_overrides_runpath=yes])]) ++ LDFLAGS=$save_LDFLAGS ++ libdir=$save_libdir ++ + # This implies no fast_install, which is unacceptable. + # Some rework will be needed to allow for fast_install + # before this can be enabled. + hardcode_into_libs=yes +- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" +- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" + + # Append ld.so.conf contents to the search path + if test -f /etc/ld.so.conf; then +- lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` +- sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra" ++ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` ++ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" + fi + + # We used to test for /lib/ld.so.1 and disable shared libraries on +@@ -3463,11 +3344,23 @@ + dynamic_linker='GNU/Linux ld.so' + ;; + ++netbsdelf*-gnu) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=no ++ hardcode_into_libs=yes ++ dynamic_linker='NetBSD ld.elf_so' ++ ;; ++ + netbsd*) + version_type=sunos + need_lib_prefix=no + need_version=no +- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then ++ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + dynamic_linker='NetBSD (a.out) ld.so' +@@ -3488,14 +3381,16 @@ + shlibpath_overrides_runpath=yes + ;; + +-nto-qnx*) +- version_type=linux ++*nto* | *qnx*) ++ version_type=qnx + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=yes ++ shlibpath_overrides_runpath=no ++ hardcode_into_libs=yes ++ dynamic_linker='ldqnx.so' + ;; + + openbsd*) +@@ -3504,13 +3399,13 @@ + need_lib_prefix=no + # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. + case $host_os in +- openbsd3.3 | openbsd3.3.*) need_version=yes ;; +- *) need_version=no ;; ++ openbsd3.3 | openbsd3.3.*) need_version=yes ;; ++ *) need_version=no ;; + esac + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + shlibpath_var=LD_LIBRARY_PATH +- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then ++ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + case $host_os in + openbsd2.[[89]] | openbsd2.[[89]].*) + shlibpath_overrides_runpath=no +@@ -3582,7 +3477,6 @@ + sni) + shlibpath_overrides_runpath=no + need_lib_prefix=no +- export_dynamic_flag_spec='${wl}-Blargedynsym' + runpath_var=LD_RUN_PATH + ;; + siemens) +@@ -3613,13 +3507,12 @@ + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + if test "$with_gnu_ld" = yes; then + sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' +- shlibpath_overrides_runpath=no + else + sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' +- shlibpath_overrides_runpath=yes + case $host_os in + sco3.2v5*) + sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" +@@ -3629,6 +3522,17 @@ + sys_lib_dlsearch_path_spec='/usr/lib' + ;; + ++tpf*) ++ # TPF is a cross-target only. Preferred cross-host = GNU/Linux. ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_name_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=no ++ hardcode_into_libs=yes ++ ;; ++ + uts4*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +@@ -3643,302 +3547,72 @@ + AC_MSG_RESULT([$dynamic_linker]) + test "$dynamic_linker" = no && can_build_shared=no + +-AC_CACHE_VAL([lt_cv_sys_lib_search_path_spec], +-[lt_cv_sys_lib_search_path_spec="$sys_lib_search_path_spec"]) +-sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" +-AC_CACHE_VAL([lt_cv_sys_lib_dlsearch_path_spec], +-[lt_cv_sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec"]) +-sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" +- + variables_saved_for_relink="PATH $shlibpath_var $runpath_var" + if test "$GCC" = yes; then + variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" + fi +-])# AC_LIBTOOL_SYS_DYNAMIC_LINKER +- +- +-# _LT_AC_TAGCONFIG +-# ---------------- +-AC_DEFUN([_LT_AC_TAGCONFIG], +-[AC_REQUIRE([LT_AC_PROG_SED])dnl +-AC_ARG_WITH([tags], +- [AC_HELP_STRING([--with-tags@<:@=TAGS@:>@], +- [include additional configurations @<:@automatic@:>@])], +- [tagnames="$withval"]) +- +-if test -f "$ltmain" && test -n "$tagnames"; then +- if test ! -f "${ofile}"; then +- AC_MSG_WARN([output file `$ofile' does not exist]) +- fi +- +- if test -z "$LTCC"; then +- eval "`$SHELL ${ofile} --config | grep '^LTCC='`" +- if test -z "$LTCC"; then +- AC_MSG_WARN([output file `$ofile' does not look like a libtool script]) +- else +- AC_MSG_WARN([using `LTCC=$LTCC', extracted from `$ofile']) +- fi +- fi +- if test -z "$LTCFLAGS"; then +- eval "`$SHELL ${ofile} --config | grep '^LTCFLAGS='`" +- fi ++ ++if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then ++ sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" ++fi ++if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then ++ sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" ++fi ++ ++_LT_DECL([], [variables_saved_for_relink], [1], ++ [Variables whose values should be saved in libtool wrapper scripts and ++ restored at link time]) ++_LT_DECL([], [need_lib_prefix], [0], ++ [Do we need the "lib" prefix for modules?]) ++_LT_DECL([], [need_version], [0], [Do we need a version for libraries?]) ++_LT_DECL([], [version_type], [0], [Library versioning type]) ++_LT_DECL([], [runpath_var], [0], [Shared library runtime path variable]) ++_LT_DECL([], [shlibpath_var], [0],[Shared library path variable]) ++_LT_DECL([], [shlibpath_overrides_runpath], [0], ++ [Is shlibpath searched before the hard-coded library search path?]) ++_LT_DECL([], [libname_spec], [1], [Format of library name prefix]) ++_LT_DECL([], [library_names_spec], [1], ++ [[List of archive names. First name is the real one, the rest are links. ++ The last name is the one that the linker finds with -lNAME]]) ++_LT_DECL([], [soname_spec], [1], ++ [[The coded name of the library, if different from the real name]]) ++_LT_DECL([], [postinstall_cmds], [2], ++ [Command to use after installation of a shared archive]) ++_LT_DECL([], [postuninstall_cmds], [2], ++ [Command to use after uninstallation of a shared archive]) ++_LT_DECL([], [finish_cmds], [2], ++ [Commands used to finish a libtool library installation in a directory]) ++_LT_DECL([], [finish_eval], [1], ++ [[As "finish_cmds", except a single script fragment to be evaled but ++ not shown]]) ++_LT_DECL([], [hardcode_into_libs], [0], ++ [Whether we should hardcode library paths into libraries]) ++_LT_DECL([], [sys_lib_search_path_spec], [2], ++ [Compile-time system search path for libraries]) ++_LT_DECL([], [sys_lib_dlsearch_path_spec], [2], ++ [Run-time system search path for libraries]) ++])# _LT_SYS_DYNAMIC_LINKER + +- # Extract list of available tagged configurations in $ofile. +- # Note that this assumes the entire list is on one line. +- available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'` + +- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," +- for tagname in $tagnames; do +- IFS="$lt_save_ifs" +- # Check whether tagname contains only valid characters +- case `$echo "X$tagname" | $Xsed -e 's:[[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]]::g'` in +- "") ;; +- *) AC_MSG_ERROR([invalid tag name: $tagname]) +- ;; +- esac +- +- if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null +- then +- AC_MSG_ERROR([tag name \"$tagname\" already exists]) +- fi +- +- # Update the list of available tags. +- if test -n "$tagname"; then +- echo appending configuration tag \"$tagname\" to $ofile +- +- case $tagname in +- CXX) +- if test -n "$CXX" && ( test "X$CXX" != "Xno" && +- ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || +- (test "X$CXX" != "Xg++"))) ; then +- AC_LIBTOOL_LANG_CXX_CONFIG +- else +- tagname="" +- fi +- ;; +- +- F77) +- if test -n "$F77" && test "X$F77" != "Xno"; then +- AC_LIBTOOL_LANG_F77_CONFIG +- else +- tagname="" +- fi +- ;; +- +- GCJ) +- if test -n "$GCJ" && test "X$GCJ" != "Xno"; then +- AC_LIBTOOL_LANG_GCJ_CONFIG +- else +- tagname="" +- fi +- ;; +- +- RC) +- AC_LIBTOOL_LANG_RC_CONFIG +- ;; +- +- *) +- AC_MSG_ERROR([Unsupported tag name: $tagname]) +- ;; +- esac +- +- # Append the new tag name to the list of available tags. +- if test -n "$tagname" ; then +- available_tags="$available_tags $tagname" +- fi +- fi +- done +- IFS="$lt_save_ifs" +- +- # Now substitute the updated list of available tags. +- if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then +- mv "${ofile}T" "$ofile" +- chmod +x "$ofile" +- else +- rm -f "${ofile}T" +- AC_MSG_ERROR([unable to update list of available tagged configurations.]) +- fi +-fi +-])# _LT_AC_TAGCONFIG +- +- +-# AC_LIBTOOL_DLOPEN +-# ----------------- +-# enable checks for dlopen support +-AC_DEFUN([AC_LIBTOOL_DLOPEN], +- [AC_BEFORE([$0],[AC_LIBTOOL_SETUP]) +-])# AC_LIBTOOL_DLOPEN +- +- +-# AC_LIBTOOL_WIN32_DLL +-# -------------------- +-# declare package support for building win32 DLLs +-AC_DEFUN([AC_LIBTOOL_WIN32_DLL], +-[AC_BEFORE([$0], [AC_LIBTOOL_SETUP]) +-])# AC_LIBTOOL_WIN32_DLL +- +- +-# AC_ENABLE_SHARED([DEFAULT]) +-# --------------------------- +-# implement the --enable-shared flag +-# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. +-AC_DEFUN([AC_ENABLE_SHARED], +-[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl +-AC_ARG_ENABLE([shared], +- [AC_HELP_STRING([--enable-shared@<:@=PKGS@:>@], +- [build shared libraries @<:@default=]AC_ENABLE_SHARED_DEFAULT[@:>@])], +- [p=${PACKAGE-default} +- case $enableval in +- yes) enable_shared=yes ;; +- no) enable_shared=no ;; +- *) +- enable_shared=no +- # Look at the argument we got. We use all the common list separators. +- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," +- for pkg in $enableval; do +- IFS="$lt_save_ifs" +- if test "X$pkg" = "X$p"; then +- enable_shared=yes +- fi +- done +- IFS="$lt_save_ifs" +- ;; +- esac], +- [enable_shared=]AC_ENABLE_SHARED_DEFAULT) +-])# AC_ENABLE_SHARED +- +- +-# AC_DISABLE_SHARED +-# ----------------- +-# set the default shared flag to --disable-shared +-AC_DEFUN([AC_DISABLE_SHARED], +-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl +-AC_ENABLE_SHARED(no) +-])# AC_DISABLE_SHARED +- +- +-# AC_ENABLE_STATIC([DEFAULT]) +-# --------------------------- +-# implement the --enable-static flag +-# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. +-AC_DEFUN([AC_ENABLE_STATIC], +-[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl +-AC_ARG_ENABLE([static], +- [AC_HELP_STRING([--enable-static@<:@=PKGS@:>@], +- [build static libraries @<:@default=]AC_ENABLE_STATIC_DEFAULT[@:>@])], +- [p=${PACKAGE-default} +- case $enableval in +- yes) enable_static=yes ;; +- no) enable_static=no ;; +- *) +- enable_static=no +- # Look at the argument we got. We use all the common list separators. +- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," +- for pkg in $enableval; do +- IFS="$lt_save_ifs" +- if test "X$pkg" = "X$p"; then +- enable_static=yes +- fi +- done +- IFS="$lt_save_ifs" +- ;; +- esac], +- [enable_static=]AC_ENABLE_STATIC_DEFAULT) +-])# AC_ENABLE_STATIC +- +- +-# AC_DISABLE_STATIC +-# ----------------- +-# set the default static flag to --disable-static +-AC_DEFUN([AC_DISABLE_STATIC], +-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl +-AC_ENABLE_STATIC(no) +-])# AC_DISABLE_STATIC +- +- +-# AC_ENABLE_FAST_INSTALL([DEFAULT]) +-# --------------------------------- +-# implement the --enable-fast-install flag +-# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. +-AC_DEFUN([AC_ENABLE_FAST_INSTALL], +-[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl +-AC_ARG_ENABLE([fast-install], +- [AC_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@], +- [optimize for fast installation @<:@default=]AC_ENABLE_FAST_INSTALL_DEFAULT[@:>@])], +- [p=${PACKAGE-default} +- case $enableval in +- yes) enable_fast_install=yes ;; +- no) enable_fast_install=no ;; +- *) +- enable_fast_install=no +- # Look at the argument we got. We use all the common list separators. +- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," +- for pkg in $enableval; do +- IFS="$lt_save_ifs" +- if test "X$pkg" = "X$p"; then +- enable_fast_install=yes +- fi +- done +- IFS="$lt_save_ifs" +- ;; +- esac], +- [enable_fast_install=]AC_ENABLE_FAST_INSTALL_DEFAULT) +-])# AC_ENABLE_FAST_INSTALL +- +- +-# AC_DISABLE_FAST_INSTALL +-# ----------------------- +-# set the default to --disable-fast-install +-AC_DEFUN([AC_DISABLE_FAST_INSTALL], +-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl +-AC_ENABLE_FAST_INSTALL(no) +-])# AC_DISABLE_FAST_INSTALL +- +- +-# AC_LIBTOOL_PICMODE([MODE]) +-# -------------------------- +-# implement the --with-pic flag +-# MODE is either `yes' or `no'. If omitted, it defaults to `both'. +-AC_DEFUN([AC_LIBTOOL_PICMODE], +-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl +-pic_mode=ifelse($#,1,$1,default) +-])# AC_LIBTOOL_PICMODE +- +- +-# AC_PROG_EGREP +-# ------------- +-# This is predefined starting with Autoconf 2.54, so this conditional +-# definition can be removed once we require Autoconf 2.54 or later. +-m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP], +-[AC_CACHE_CHECK([for egrep], [ac_cv_prog_egrep], +- [if echo a | (grep -E '(a|b)') >/dev/null 2>&1 +- then ac_cv_prog_egrep='grep -E' +- else ac_cv_prog_egrep='egrep' +- fi]) +- EGREP=$ac_cv_prog_egrep +- AC_SUBST([EGREP]) +-])]) +- +- +-# AC_PATH_TOOL_PREFIX +-# ------------------- +-# find a file program which can recognize shared library +-AC_DEFUN([AC_PATH_TOOL_PREFIX], +-[AC_REQUIRE([AC_PROG_EGREP])dnl +-AC_MSG_CHECKING([for $1]) +-AC_CACHE_VAL(lt_cv_path_MAGIC_CMD, +-[case $MAGIC_CMD in +-[[\\/*] | ?:[\\/]*]) +- lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. +- ;; +-*) +- lt_save_MAGIC_CMD="$MAGIC_CMD" +- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR +-dnl $ac_dummy forces splitting on constant user-supplied paths. +-dnl POSIX.2 word splitting is done only on the output of word expansions, +-dnl not every word. This closes a longstanding sh security hole. +- ac_dummy="ifelse([$2], , $PATH, [$2])" +- for ac_dir in $ac_dummy; do ++# _LT_PATH_TOOL_PREFIX(TOOL) ++# -------------------------- ++# find a file program which can recognize shared library ++AC_DEFUN([_LT_PATH_TOOL_PREFIX], ++[m4_require([_LT_DECL_EGREP])dnl ++AC_MSG_CHECKING([for $1]) ++AC_CACHE_VAL(lt_cv_path_MAGIC_CMD, ++[case $MAGIC_CMD in ++[[\\/*] | ?:[\\/]*]) ++ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. ++ ;; ++*) ++ lt_save_MAGIC_CMD="$MAGIC_CMD" ++ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR ++dnl $ac_dummy forces splitting on constant user-supplied paths. ++dnl POSIX.2 word splitting is done only on the output of word expansions, ++dnl not every word. This closes a longstanding sh security hole. ++ ac_dummy="m4_if([$2], , $PATH, [$2])" ++ for ac_dir in $ac_dummy; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$1; then +@@ -3952,7 +3626,7 @@ + $EGREP "$file_magic_regex" > /dev/null; then + : + else +- cat <&2 ++ cat <<_LT_EOF 1>&2 + + *** Warning: the command libtool uses to detect shared libraries, + *** $file_magic_cmd, produces output that libtool cannot recognize. +@@ -3963,7 +3637,7 @@ + *** may want to report the problem to your system manager and/or to + *** bug-libtool@gnu.org + +-EOF ++_LT_EOF + fi ;; + esac + fi +@@ -3980,37 +3654,47 @@ + else + AC_MSG_RESULT(no) + fi +-])# AC_PATH_TOOL_PREFIX ++_LT_DECL([], [MAGIC_CMD], [0], ++ [Used to examine libraries when file_magic_cmd begins with "file"])dnl ++])# _LT_PATH_TOOL_PREFIX + ++# Old name: ++AU_ALIAS([AC_PATH_TOOL_PREFIX], [_LT_PATH_TOOL_PREFIX]) ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([AC_PATH_TOOL_PREFIX], []) + +-# AC_PATH_MAGIC +-# ------------- ++ ++# _LT_PATH_MAGIC ++# -------------- + # find a file program which can recognize a shared library +-AC_DEFUN([AC_PATH_MAGIC], +-[AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH) ++m4_defun([_LT_PATH_MAGIC], ++[_LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH) + if test -z "$lt_cv_path_MAGIC_CMD"; then + if test -n "$ac_tool_prefix"; then +- AC_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH) ++ _LT_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH) + else + MAGIC_CMD=: + fi + fi +-])# AC_PATH_MAGIC ++])# _LT_PATH_MAGIC + + +-# AC_PROG_LD ++# LT_PATH_LD + # ---------- + # find the pathname to the GNU or non-GNU linker +-AC_DEFUN([AC_PROG_LD], +-[AC_ARG_WITH([gnu-ld], +- [AC_HELP_STRING([--with-gnu-ld], +- [assume the C compiler uses GNU ld @<:@default=no@:>@])], +- [test "$withval" = no || with_gnu_ld=yes], +- [with_gnu_ld=no]) +-AC_REQUIRE([LT_AC_PROG_SED])dnl +-AC_REQUIRE([AC_PROG_CC])dnl ++AC_DEFUN([LT_PATH_LD], ++[AC_REQUIRE([AC_PROG_CC])dnl + AC_REQUIRE([AC_CANONICAL_HOST])dnl + AC_REQUIRE([AC_CANONICAL_BUILD])dnl ++m4_require([_LT_DECL_SED])dnl ++m4_require([_LT_DECL_EGREP])dnl ++ ++AC_ARG_WITH([gnu-ld], ++ [AS_HELP_STRING([--with-gnu-ld], ++ [assume the C compiler uses GNU ld @<:@default=no@:>@])], ++ [test "$withval" = no || with_gnu_ld=yes], ++ [with_gnu_ld=no])dnl ++ + ac_prog=ld + if test "$GCC" = yes; then + # Check if gcc -print-prog-name=ld gives a path. +@@ -4027,9 +3711,9 @@ + [[\\/]]* | ?:[[\\/]]*) + re_direlt='/[[^/]][[^/]]*/\.\./' + # Canonicalize the pathname of ld +- ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'` +- while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do +- ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"` ++ ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` ++ while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do ++ ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` + done + test -z "$LD" && LD="$ac_prog" + ;; +@@ -4079,15 +3763,24 @@ + AC_MSG_RESULT(no) + fi + test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH]) +-AC_PROG_LD_GNU +-])# AC_PROG_LD ++_LT_PATH_LD_GNU ++AC_SUBST([LD]) + ++_LT_TAGDECL([], [LD], [1], [The linker used to build libraries]) ++])# LT_PATH_LD + +-# AC_PROG_LD_GNU +-# -------------- +-AC_DEFUN([AC_PROG_LD_GNU], +-[AC_REQUIRE([AC_PROG_EGREP])dnl +-AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld, ++# Old names: ++AU_ALIAS([AM_PROG_LD], [LT_PATH_LD]) ++AU_ALIAS([AC_PROG_LD], [LT_PATH_LD]) ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([AM_PROG_LD], []) ++dnl AC_DEFUN([AC_PROG_LD], []) ++ ++ ++# _LT_PATH_LD_GNU ++#- -------------- ++m4_defun([_LT_PATH_LD_GNU], ++[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld, + [# I'd rather use --version here, but apparently some GNU lds only accept -v. + case `$LD -v 2>&1 /dev/null; then ++ if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then + case $host_cpu in + i*86 ) + # Not sure whether the presence of OpenBSD here was a mistake. +@@ -4244,8 +3940,8 @@ + lt_cv_deplibs_check_method=pass_all + ;; + +-netbsd*) +- if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then ++netbsd* | netbsdelf*-gnu) ++ if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' + else + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$' +@@ -4258,12 +3954,12 @@ + lt_cv_file_magic_test_file=/usr/lib/libnls.so + ;; + +-nto-qnx*) +- lt_cv_deplibs_check_method=unknown ++*nto* | *qnx*) ++ lt_cv_deplibs_check_method=pass_all + ;; + + openbsd*) +- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then ++ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$' + else + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' +@@ -4282,6 +3978,10 @@ + lt_cv_deplibs_check_method=pass_all + ;; + ++sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ + sysv4 | sysv4.3*) + case $host_vendor in + motorola) +@@ -4309,7 +4009,7 @@ + esac + ;; + +-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) ++tpf*) + lt_cv_deplibs_check_method=pass_all + ;; + esac +@@ -4317,14 +4017,20 @@ + file_magic_cmd=$lt_cv_file_magic_cmd + deplibs_check_method=$lt_cv_deplibs_check_method + test -z "$deplibs_check_method" && deplibs_check_method=unknown +-])# AC_DEPLIBS_CHECK_METHOD + ++_LT_DECL([], [deplibs_check_method], [1], ++ [Method to check whether dependent libraries are shared objects]) ++_LT_DECL([], [file_magic_cmd], [1], ++ [Command to use when deplibs_check_method == "file_magic"]) ++])# _LT_CHECK_MAGIC_METHOD + +-# AC_PROG_NM ++ ++# LT_PATH_NM + # ---------- +-# find the pathname to a BSD-compatible name lister +-AC_DEFUN([AC_PROG_NM], +-[AC_CACHE_CHECK([for BSD-compatible nm], lt_cv_path_NM, ++# find the pathname to a BSD- or MS-compatible name lister ++AC_DEFUN([LT_PATH_NM], ++[AC_REQUIRE([AC_PROG_CC])dnl ++AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM, + [if test -n "$NM"; then + # Let the user override the test. + lt_cv_path_NM="$NM" +@@ -4366,16 +4072,51 @@ + done + IFS="$lt_save_ifs" + done +- test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm ++ : ${lt_cv_path_NM=no} + fi]) +-NM="$lt_cv_path_NM" +-])# AC_PROG_NM ++if test "$lt_cv_path_NM" != "no"; then ++ NM="$lt_cv_path_NM" ++else ++ # Didn't find any BSD compatible name lister, look for dumpbin. ++ AC_CHECK_TOOLS(DUMPBIN, ["dumpbin -symbols" "link -dump -symbols"], :) ++ AC_SUBST([DUMPBIN]) ++ if test "$DUMPBIN" != ":"; then ++ NM="$DUMPBIN" ++ fi ++fi ++test -z "$NM" && NM=nm ++AC_SUBST([NM]) ++_LT_DECL([], [NM], [1], [A BSD- or MS-compatible name lister])dnl + ++AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface], ++ [lt_cv_nm_interface="BSD nm" ++ echo "int some_variable = 0;" > conftest.$ac_ext ++ (eval echo "\"\$as_me:__oline__: $ac_compile\"" >&AS_MESSAGE_LOG_FD) ++ (eval "$ac_compile" 2>conftest.err) ++ cat conftest.err >&AS_MESSAGE_LOG_FD ++ (eval echo "\"\$as_me:__oline__: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD) ++ (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) ++ cat conftest.err >&AS_MESSAGE_LOG_FD ++ (eval echo "\"\$as_me:__oline__: output\"" >&AS_MESSAGE_LOG_FD) ++ cat conftest.out >&AS_MESSAGE_LOG_FD ++ if $GREP 'External.*some_variable' conftest.out > /dev/null; then ++ lt_cv_nm_interface="MS dumpbin" ++ fi ++ rm -f conftest*]) ++])# LT_PATH_NM ++ ++# Old names: ++AU_ALIAS([AM_PROG_NM], [LT_PATH_NM]) ++AU_ALIAS([AC_PROG_NM], [LT_PATH_NM]) ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([AM_PROG_NM], []) ++dnl AC_DEFUN([AC_PROG_NM], []) + +-# AC_CHECK_LIBM +-# ------------- ++ ++# LT_LIB_M ++# -------- + # check for math library +-AC_DEFUN([AC_CHECK_LIBM], ++AC_DEFUN([LT_LIB_M], + [AC_REQUIRE([AC_CANONICAL_HOST])dnl + LIBM= + case $host in +@@ -4390,4196 +4131,5716 @@ + AC_CHECK_LIB(m, cos, LIBM="-lm") + ;; + esac +-])# AC_CHECK_LIBM +- +- +-# AC_LIBLTDL_CONVENIENCE([DIRECTORY]) +-# ----------------------------------- +-# sets LIBLTDL to the link flags for the libltdl convenience library and +-# LTDLINCL to the include flags for the libltdl header and adds +-# --enable-ltdl-convenience to the configure arguments. Note that +-# AC_CONFIG_SUBDIRS is not called here. If DIRECTORY is not provided, +-# it is assumed to be `libltdl'. LIBLTDL will be prefixed with +-# '${top_builddir}/' and LTDLINCL will be prefixed with '${top_srcdir}/' +-# (note the single quotes!). If your package is not flat and you're not +-# using automake, define top_builddir and top_srcdir appropriately in +-# the Makefiles. +-AC_DEFUN([AC_LIBLTDL_CONVENIENCE], +-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl +- case $enable_ltdl_convenience in +- no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;; +- "") enable_ltdl_convenience=yes +- ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;; +- esac +- LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la +- LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) +- # For backwards non-gettext consistent compatibility... +- INCLTDL="$LTDLINCL" +-])# AC_LIBLTDL_CONVENIENCE ++AC_SUBST([LIBM]) ++])# LT_LIB_M + +- +-# AC_LIBLTDL_INSTALLABLE([DIRECTORY]) +-# ----------------------------------- +-# sets LIBLTDL to the link flags for the libltdl installable library and +-# LTDLINCL to the include flags for the libltdl header and adds +-# --enable-ltdl-install to the configure arguments. Note that +-# AC_CONFIG_SUBDIRS is not called here. If DIRECTORY is not provided, +-# and an installed libltdl is not found, it is assumed to be `libltdl'. +-# LIBLTDL will be prefixed with '${top_builddir}/'# and LTDLINCL with +-# '${top_srcdir}/' (note the single quotes!). If your package is not +-# flat and you're not using automake, define top_builddir and top_srcdir +-# appropriately in the Makefiles. +-# In the future, this macro may have to be called after AC_PROG_LIBTOOL. +-AC_DEFUN([AC_LIBLTDL_INSTALLABLE], +-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl +- AC_CHECK_LIB(ltdl, lt_dlinit, +- [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no], +- [if test x"$enable_ltdl_install" = xno; then +- AC_MSG_WARN([libltdl not installed, but installation disabled]) +- else +- enable_ltdl_install=yes +- fi +- ]) +- if test x"$enable_ltdl_install" = x"yes"; then +- ac_configure_args="$ac_configure_args --enable-ltdl-install" +- LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la +- LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) +- else +- ac_configure_args="$ac_configure_args --enable-ltdl-install=no" +- LIBLTDL="-lltdl" +- LTDLINCL= +- fi +- # For backwards non-gettext consistent compatibility... +- INCLTDL="$LTDLINCL" +-])# AC_LIBLTDL_INSTALLABLE ++# Old name: ++AU_ALIAS([AC_CHECK_LIBM], [LT_LIB_M]) ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([AC_CHECK_LIBM], []) + + +-# AC_LIBTOOL_CXX +-# -------------- +-# enable support for C++ libraries +-AC_DEFUN([AC_LIBTOOL_CXX], +-[AC_REQUIRE([_LT_AC_LANG_CXX]) +-])# AC_LIBTOOL_CXX ++# _LT_COMPILER_NO_RTTI([TAGNAME]) ++# ------------------------------- ++m4_defun([_LT_COMPILER_NO_RTTI], ++[m4_require([_LT_TAG_COMPILER])dnl + ++_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= + +-# _LT_AC_LANG_CXX +-# --------------- +-AC_DEFUN([_LT_AC_LANG_CXX], +-[AC_REQUIRE([AC_PROG_CXX]) +-AC_REQUIRE([_LT_AC_PROG_CXXCPP]) +-_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}CXX]) +-])# _LT_AC_LANG_CXX ++if test "$GCC" = yes; then ++ _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' + +-# _LT_AC_PROG_CXXCPP +-# ------------------ +-AC_DEFUN([_LT_AC_PROG_CXXCPP], +-[ +-AC_REQUIRE([AC_PROG_CXX]) +-if test -n "$CXX" && ( test "X$CXX" != "Xno" && +- ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || +- (test "X$CXX" != "Xg++"))) ; then +- AC_PROG_CXXCPP ++ _LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions], ++ lt_cv_prog_compiler_rtti_exceptions, ++ [-fno-rtti -fno-exceptions], [], ++ [_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"]) + fi +-])# _LT_AC_PROG_CXXCPP +- +-# AC_LIBTOOL_F77 +-# -------------- +-# enable support for Fortran 77 libraries +-AC_DEFUN([AC_LIBTOOL_F77], +-[AC_REQUIRE([_LT_AC_LANG_F77]) +-])# AC_LIBTOOL_F77 ++_LT_TAGDECL([no_builtin_flag], [lt_prog_compiler_no_builtin_flag], [1], ++ [Compiler flag to turn off builtin functions]) ++])# _LT_COMPILER_NO_RTTI + + +-# _LT_AC_LANG_F77 +-# --------------- +-AC_DEFUN([_LT_AC_LANG_F77], +-[AC_REQUIRE([AC_PROG_F77]) +-_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}F77]) +-])# _LT_AC_LANG_F77 ++# _LT_CMD_GLOBAL_SYMBOLS ++# ---------------------- ++m4_defun([_LT_CMD_GLOBAL_SYMBOLS], ++[AC_REQUIRE([AC_CANONICAL_HOST])dnl ++AC_REQUIRE([AC_PROG_CC])dnl ++AC_REQUIRE([LT_PATH_NM])dnl ++AC_REQUIRE([LT_PATH_LD])dnl ++m4_require([_LT_DECL_SED])dnl ++m4_require([_LT_DECL_EGREP])dnl ++m4_require([_LT_TAG_COMPILER])dnl + ++# Check for command to grab the raw symbol name followed by C symbol from nm. ++AC_MSG_CHECKING([command to parse $NM output from $compiler object]) ++AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe], ++[ ++# These are sane defaults that work on at least a few old systems. ++# [They come from Ultrix. What could be older than Ultrix?!! ;)] + +-# AC_LIBTOOL_GCJ +-# -------------- +-# enable support for GCJ libraries +-AC_DEFUN([AC_LIBTOOL_GCJ], +-[AC_REQUIRE([_LT_AC_LANG_GCJ]) +-])# AC_LIBTOOL_GCJ ++# Character class describing NM global symbol codes. ++symcode='[[BCDEGRST]]' + ++# Regexp to match symbols that can be accessed directly from C. ++sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)' + +-# _LT_AC_LANG_GCJ +-# --------------- +-AC_DEFUN([_LT_AC_LANG_GCJ], +-[AC_PROVIDE_IFELSE([AC_PROG_GCJ],[], +- [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[], +- [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[], +- [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])], +- [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])], +- [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])]) +-_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}GCJ]) +-])# _LT_AC_LANG_GCJ ++# Define system-specific variables. ++case $host_os in ++aix*) ++ symcode='[[BCDT]]' ++ ;; ++cygwin* | mingw* | pw32*) ++ symcode='[[ABCDGISTW]]' ++ ;; ++hpux*) ++ if test "$host_cpu" = ia64; then ++ symcode='[[ABCDEGRST]]' ++ fi ++ ;; ++irix* | nonstopux*) ++ symcode='[[BCDEGRST]]' ++ ;; ++osf*) ++ symcode='[[BCDEGQRST]]' ++ ;; ++solaris*) ++ symcode='[[BDRT]]' ++ ;; ++sco3.2v5*) ++ symcode='[[DT]]' ++ ;; ++sysv4.2uw2*) ++ symcode='[[DT]]' ++ ;; ++sysv5* | sco5v6* | unixware* | OpenUNIX*) ++ symcode='[[ABDT]]' ++ ;; ++sysv4) ++ symcode='[[DFNSTU]]' ++ ;; ++esac + ++# If we're using GNU nm, then use its standard symbol codes. ++case `$NM -V 2>&1` in ++*GNU* | *'with BFD'*) ++ symcode='[[ABCDGIRSTW]]' ;; ++esac + +-# AC_LIBTOOL_RC +-# ------------- +-# enable support for Windows resource files +-AC_DEFUN([AC_LIBTOOL_RC], +-[AC_REQUIRE([LT_AC_PROG_RC]) +-_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}RC]) +-])# AC_LIBTOOL_RC ++# Transform an extracted symbol line into a proper C declaration. ++# Some systems (esp. on ia64) link data and code symbols differently, ++# so use this general approach. ++lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" + ++# Transform an extracted symbol line into symbol name and symbol address ++lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p'" ++lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"lib\2\", (void *) \&\2},/p'" + +-# AC_LIBTOOL_LANG_C_CONFIG +-# ------------------------ +-# Ensure that the configuration vars for the C compiler are +-# suitably defined. Those variables are subsequently used by +-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. +-AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG], [_LT_AC_LANG_C_CONFIG]) +-AC_DEFUN([_LT_AC_LANG_C_CONFIG], +-[lt_save_CC="$CC" +-AC_LANG_PUSH(C) +- +-# Source file extension for C test sources. +-ac_ext=c +- +-# Object file extension for compiled C test sources. +-objext=o +-_LT_AC_TAGVAR(objext, $1)=$objext +- +-# Code to be used in simple compile tests +-lt_simple_compile_test_code="int some_variable = 0;" +- +-# Code to be used in simple link tests +-lt_simple_link_test_code='int main(){return(0);}' +- +-_LT_AC_SYS_COMPILER +- +-# save warnings/boilerplate of simple test code +-_LT_COMPILER_BOILERPLATE +-_LT_LINKER_BOILERPLATE +- +-AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1) +-AC_LIBTOOL_PROG_COMPILER_PIC($1) +-AC_LIBTOOL_PROG_CC_C_O($1) +-AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1) +-AC_LIBTOOL_PROG_LD_SHLIBS($1) +-AC_LIBTOOL_SYS_DYNAMIC_LINKER($1) +-AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1) +-AC_LIBTOOL_SYS_LIB_STRIP +-AC_LIBTOOL_DLOPEN_SELF +- +-# Report which library types will actually be built +-AC_MSG_CHECKING([if libtool supports shared libraries]) +-AC_MSG_RESULT([$can_build_shared]) +- +-AC_MSG_CHECKING([whether to build shared libraries]) +-test "$can_build_shared" = "no" && enable_shared=no +- +-# On AIX, shared libraries and static libraries use the same namespace, and +-# are all built from PIC. +-case $host_os in +-aix3*) +- test "$enable_shared" = yes && enable_static=no +- if test -n "$RANLIB"; then +- archive_cmds="$archive_cmds~\$RANLIB \$lib" +- postinstall_cmds='$RANLIB $lib' +- fi ++# Handle CRLF in mingw tool chain ++opt_cr= ++case $build_os in ++mingw*) ++ opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp + ;; +- +-aix[[4-9]]*) +- if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then +- test "$enable_shared" = yes && enable_static=no +- fi +- ;; + esac +-AC_MSG_RESULT([$enable_shared]) +- +-AC_MSG_CHECKING([whether to build static libraries]) +-# Make sure either enable_shared or enable_static is yes. +-test "$enable_shared" = yes || enable_static=yes +-AC_MSG_RESULT([$enable_static]) +- +-AC_LIBTOOL_CONFIG($1) +- +-AC_LANG_POP +-CC="$lt_save_CC" +-])# AC_LIBTOOL_LANG_C_CONFIG +- +- +-# AC_LIBTOOL_LANG_CXX_CONFIG +-# -------------------------- +-# Ensure that the configuration vars for the C compiler are +-# suitably defined. Those variables are subsequently used by +-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. +-AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG], [_LT_AC_LANG_CXX_CONFIG(CXX)]) +-AC_DEFUN([_LT_AC_LANG_CXX_CONFIG], +-[AC_LANG_PUSH(C++) +-AC_REQUIRE([AC_PROG_CXX]) +-AC_REQUIRE([_LT_AC_PROG_CXXCPP]) +- +-_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no +-_LT_AC_TAGVAR(allow_undefined_flag, $1)= +-_LT_AC_TAGVAR(always_export_symbols, $1)=no +-_LT_AC_TAGVAR(archive_expsym_cmds, $1)= +-_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)= +-_LT_AC_TAGVAR(hardcode_direct, $1)=no +-_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= +-_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= +-_LT_AC_TAGVAR(hardcode_libdir_separator, $1)= +-_LT_AC_TAGVAR(hardcode_minus_L, $1)=no +-_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported +-_LT_AC_TAGVAR(hardcode_automatic, $1)=no +-_LT_AC_TAGVAR(module_cmds, $1)= +-_LT_AC_TAGVAR(module_expsym_cmds, $1)= +-_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown +-_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds +-_LT_AC_TAGVAR(no_undefined_flag, $1)= +-_LT_AC_TAGVAR(whole_archive_flag_spec, $1)= +-_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no +- +-# Dependencies to place before and after the object being linked: +-_LT_AC_TAGVAR(predep_objects, $1)= +-_LT_AC_TAGVAR(postdep_objects, $1)= +-_LT_AC_TAGVAR(predeps, $1)= +-_LT_AC_TAGVAR(postdeps, $1)= +-_LT_AC_TAGVAR(compiler_lib_search_path, $1)= +-_LT_AC_TAGVAR(compiler_lib_search_dirs, $1)= +- +-# Source file extension for C++ test sources. +-ac_ext=cpp +- +-# Object file extension for compiled C++ test sources. +-objext=o +-_LT_AC_TAGVAR(objext, $1)=$objext + +-# Code to be used in simple compile tests +-lt_simple_compile_test_code="int some_variable = 0;" ++# Try without a prefix underscore, then with it. ++for ac_symprfx in "" "_"; do + +-# Code to be used in simple link tests +-lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }' ++ # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. ++ symxfrm="\\1 $ac_symprfx\\2 \\2" + +-# ltmain only uses $CC for tagged configurations so make sure $CC is set. +-_LT_AC_SYS_COMPILER ++ # Write the raw and C identifiers. ++ if test "$lt_cv_nm_interface" = "MS dumpbin"; then ++ # Fake it for dumpbin and say T for any non-static function ++ # and D for any global variable. ++ # Also find C++ and __fastcall symbols from MSVC++, ++ # which start with @ or ?. ++ lt_cv_sys_global_symbol_pipe="$AWK ['"\ ++" {last_section=section; section=\$ 3};"\ ++" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ ++" \$ 0!~/External *\|/{next};"\ ++" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\ ++" {if(hide[section]) next};"\ ++" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\ ++" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\ ++" s[1]~/^[@?]/{print s[1], s[1]; next};"\ ++" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\ ++" ' prfx=^$ac_symprfx]" ++ else ++ lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" ++ fi + +-# save warnings/boilerplate of simple test code +-_LT_COMPILER_BOILERPLATE +-_LT_LINKER_BOILERPLATE ++ # Check to see that the pipe works correctly. ++ pipe_works=no + +-# Allow CC to be a program name with arguments. +-lt_save_CC=$CC +-lt_save_LD=$LD +-lt_save_GCC=$GCC +-GCC=$GXX +-lt_save_with_gnu_ld=$with_gnu_ld +-lt_save_path_LD=$lt_cv_path_LD +-if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then +- lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx +-else +- $as_unset lt_cv_prog_gnu_ld +-fi +-if test -n "${lt_cv_path_LDCXX+set}"; then +- lt_cv_path_LD=$lt_cv_path_LDCXX +-else +- $as_unset lt_cv_path_LD +-fi +-test -z "${LDCXX+set}" || LD=$LDCXX +-CC=${CXX-"c++"} +-compiler=$CC +-_LT_AC_TAGVAR(compiler, $1)=$CC +-_LT_CC_BASENAME([$compiler]) ++ rm -f conftest* ++ cat > conftest.$ac_ext <<_LT_EOF ++#ifdef __cplusplus ++extern "C" { ++#endif ++char nm_test_var; ++void nm_test_func(void); ++void nm_test_func(void){} ++#ifdef __cplusplus ++} ++#endif ++int main(){nm_test_var='a';nm_test_func();return(0);} ++_LT_EOF + +-# We don't want -fno-exception wen compiling C++ code, so set the +-# no_builtin_flag separately +-if test "$GXX" = yes; then +- _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' +-else +- _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= +-fi ++ if AC_TRY_EVAL(ac_compile); then ++ # Now try to grab the symbols. ++ nlist=conftest.nm ++ if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then ++ # Try sorting and uniquifying the output. ++ if sort "$nlist" | uniq > "$nlist"T; then ++ mv -f "$nlist"T "$nlist" ++ else ++ rm -f "$nlist"T ++ fi + +-if test "$GXX" = yes; then +- # Set up default GNU C++ configuration ++ # Make sure that we snagged all the symbols we need. ++ if $GREP ' nm_test_var$' "$nlist" >/dev/null; then ++ if $GREP ' nm_test_func$' "$nlist" >/dev/null; then ++ cat <<_LT_EOF > conftest.$ac_ext ++#ifdef __cplusplus ++extern "C" { ++#endif + +- AC_PROG_LD ++_LT_EOF ++ # Now generate the symbol file. ++ eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext' + +- # Check if GNU C++ uses GNU ld as the underlying linker, since the +- # archiving commands below assume that GNU ld is being used. +- if test "$with_gnu_ld" = yes; then +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ cat <<_LT_EOF >> conftest.$ac_ext + +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' +- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' ++/* The mapping between symbol names and symbols. */ ++const struct { ++ const char *name; ++ void *address; ++} ++lt__PROGRAM__LTX_preloaded_symbols[[]] = ++{ ++ { "@PROGRAM@", (void *) 0 }, ++_LT_EOF ++ $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext ++ cat <<\_LT_EOF >> conftest.$ac_ext ++ {0, (void *) 0} ++}; + +- # If archive_cmds runs LD, not CC, wlarc should be empty +- # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to +- # investigate it a little bit more. (MM) +- wlarc='${wl}' ++/* This works around a problem in FreeBSD linker */ ++#ifdef FREEBSD_WORKAROUND ++static const void *lt_preloaded_setup() { ++ return lt__PROGRAM__LTX_preloaded_symbols; ++} ++#endif + +- # ancient GNU ld didn't support --whole-archive et. al. +- if eval "`$CC -print-prog-name=ld` --help 2>&1" | \ +- grep 'no-whole-archive' > /dev/null; then +- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' ++#ifdef __cplusplus ++} ++#endif ++_LT_EOF ++ # Now try linking the two files. ++ mv conftest.$ac_objext conftstm.$ac_objext ++ lt_save_LIBS="$LIBS" ++ lt_save_CFLAGS="$CFLAGS" ++ LIBS="conftstm.$ac_objext" ++ CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)" ++ if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then ++ pipe_works=yes ++ fi ++ LIBS="$lt_save_LIBS" ++ CFLAGS="$lt_save_CFLAGS" ++ else ++ echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD ++ fi ++ else ++ echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD ++ fi + else +- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= ++ echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD + fi + else +- with_gnu_ld=no +- wlarc= +- +- # A generic and very simple default shared library creation +- # command for GNU C++ for the case where it uses the native +- # linker, instead of GNU ld. If possible, this setting should +- # overridden to take advantage of the native linker features on +- # the platform it is being used on. +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' ++ echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD ++ cat conftest.$ac_ext >&5 + fi ++ rm -rf conftest* conftst* + +- # Commands to make compiler produce verbose output that lists +- # what "hidden" libraries, object files and flags are used when +- # linking a shared library. +- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' +- ++ # Do not use the global_symbol_pipe unless it works. ++ if test "$pipe_works" = yes; then ++ break ++ else ++ lt_cv_sys_global_symbol_pipe= ++ fi ++done ++]) ++if test -z "$lt_cv_sys_global_symbol_pipe"; then ++ lt_cv_sys_global_symbol_to_cdecl= ++fi ++if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then ++ AC_MSG_RESULT(failed) + else +- GXX=no +- with_gnu_ld=no +- wlarc= ++ AC_MSG_RESULT(ok) + fi + +-# PORTME: fill in a description of your system's C++ link characteristics +-AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) +-_LT_AC_TAGVAR(ld_shlibs, $1)=yes +-case $host_os in +- aix3*) +- # FIXME: insert proper C++ library support +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- ;; +- aix[[4-9]]*) +- if test "$host_cpu" = ia64; then +- # On IA64, the linker does run time linking by default, so we don't +- # have to do anything special. +- aix_use_runtimelinking=no +- exp_sym_flag='-Bexport' +- no_entry_flag="" +- else +- aix_use_runtimelinking=no +- +- # Test if we are trying to use run time linking or normal +- # AIX style linking. If -brtl is somewhere in LDFLAGS, we +- # need to do runtime linking. +- case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) +- for ld_flag in $LDFLAGS; do +- case $ld_flag in +- *-brtl*) +- aix_use_runtimelinking=yes +- break +- ;; +- esac +- done +- ;; +- esac +- +- exp_sym_flag='-bexport' +- no_entry_flag='-bnoentry' +- fi ++_LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1], ++ [Take the output of nm and produce a listing of raw symbols and C names]) ++_LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1], ++ [Transform the output of nm in a proper C declaration]) ++_LT_DECL([global_symbol_to_c_name_address], ++ [lt_cv_sys_global_symbol_to_c_name_address], [1], ++ [Transform the output of nm in a C name address pair]) ++_LT_DECL([global_symbol_to_c_name_address_lib_prefix], ++ [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1], ++ [Transform the output of nm in a C name address pair when lib prefix is needed]) ++]) # _LT_CMD_GLOBAL_SYMBOLS + +- # When large executables or shared objects are built, AIX ld can +- # have problems creating the table of contents. If linking a library +- # or program results in "error TOC overflow" add -mminimal-toc to +- # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not +- # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. +- +- _LT_AC_TAGVAR(archive_cmds, $1)='' +- _LT_AC_TAGVAR(hardcode_direct, $1)=yes +- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':' +- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + +- if test "$GXX" = yes; then +- case $host_os in aix4.[[012]]|aix4.[[012]].*) +- # We only want to do this on AIX 4.2 and lower, the check +- # below for broken collect2 doesn't work under 4.3+ +- collect2name=`${CC} -print-prog-name=collect2` +- if test -f "$collect2name" && \ +- strings "$collect2name" | grep resolve_lib_name >/dev/null +- then +- # We have reworked collect2 +- : +- else +- # We have old collect2 +- _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported +- # It fails to find uninstalled libraries when the uninstalled +- # path is not listed in the libpath. Setting hardcode_minus_L +- # to unsupported forces relinking +- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' +- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= +- fi +- ;; +- esac +- shared_flag='-shared' +- if test "$aix_use_runtimelinking" = yes; then +- shared_flag="$shared_flag "'${wl}-G' +- fi +- else +- # not using gcc +- if test "$host_cpu" = ia64; then +- # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release +- # chokes on -Wl,-G. The following line is correct: +- shared_flag='-G' +- else +- if test "$aix_use_runtimelinking" = yes; then +- shared_flag='${wl}-G' +- else +- shared_flag='${wl}-bM:SRE' +- fi +- fi +- fi ++# _LT_COMPILER_PIC([TAGNAME]) ++# --------------------------- ++m4_defun([_LT_COMPILER_PIC], ++[m4_require([_LT_TAG_COMPILER])dnl ++_LT_TAGVAR(lt_prog_compiler_wl, $1)= ++_LT_TAGVAR(lt_prog_compiler_pic, $1)= ++_LT_TAGVAR(lt_prog_compiler_static, $1)= + +- # It seems that -bexpall does not export symbols beginning with +- # underscore (_), so it is better to generate a list of symbols to export. +- _LT_AC_TAGVAR(always_export_symbols, $1)=yes +- if test "$aix_use_runtimelinking" = yes; then +- # Warning - without using the other runtime loading flags (-brtl), +- # -berok will link without error, but may produce a broken library. +- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok' +- # Determine the default libpath from the value encoded in an empty executable. +- _LT_AC_SYS_LIBPATH_AIX +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" ++AC_MSG_CHECKING([for $compiler option to produce PIC]) ++m4_if([$1], [CXX], [ ++ # C++ specific cases for pic, static, wl, etc. ++ if test "$GXX" = yes; then ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' + +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" +- else ++ case $host_os in ++ aix*) ++ # All AIX code is PIC. + if test "$host_cpu" = ia64; then +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' +- _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs" +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" +- else +- # Determine the default libpath from the value encoded in an empty executable. +- _LT_AC_SYS_LIBPATH_AIX +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" +- # Warning - without using the other run time loading flags, +- # -berok will link without error, but may produce a broken library. +- _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' +- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' +- # Exported symbols can be pulled into shared objects from archives +- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='$convenience' +- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes +- # This is similar to how AIX traditionally builds its shared libraries. +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' +- fi +- fi +- ;; +- +- beos*) +- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then +- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported +- # Joseph Beckenbach says some releases of gcc +- # support --undefined. This deserves some investigation. FIXME +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- else +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- fi +- ;; +- +- chorus*) +- case $cc_basename in +- *) +- # FIXME: insert proper C++ library support +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- ;; +- esac +- ;; +- +- cygwin* | mingw* | pw32*) +- # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, +- # as there is no search path for DLLs. +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' +- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported +- _LT_AC_TAGVAR(always_export_symbols, $1)=no +- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes +- +- if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' +- # If the export-symbols file already is a .def file (1st line +- # is EXPORTS), use it as is; otherwise, prepend... +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then +- cp $export_symbols $output_objdir/$soname.def; +- else +- echo EXPORTS > $output_objdir/$soname.def; +- cat $export_symbols >> $output_objdir/$soname.def; +- fi~ +- $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' +- else +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- fi +- ;; +- darwin* | rhapsody*) +- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no +- _LT_AC_TAGVAR(hardcode_direct, $1)=no +- _LT_AC_TAGVAR(hardcode_automatic, $1)=yes +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported +- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='' +- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes +- _LT_AC_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined" +- if test "$GXX" = yes ; then +- output_verbose_link_cmd='echo' +- _LT_AC_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" +- _LT_AC_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" +- _LT_AC_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" +- if test "$lt_cv_apple_cc_single_mod" != "yes"; then +- _LT_AC_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}" +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}" +- fi +- else +- case $cc_basename in +- xlc*) +- output_verbose_link_cmd='echo' +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring' +- _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' +- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' +- _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' +- ;; +- *) +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- ;; +- esac +- fi +- ;; +- +- dgux*) +- case $cc_basename in +- ec++*) +- # FIXME: insert proper C++ library support +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- ;; +- ghcx*) +- # Green Hills C++ Compiler +- # FIXME: insert proper C++ library support +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- ;; +- *) +- # FIXME: insert proper C++ library support +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- ;; +- esac +- ;; +- freebsd[[12]]*) +- # C++ shared libraries reported to be fairly broken before switch to ELF +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- ;; +- freebsd-elf*) +- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no +- ;; +- freebsd* | dragonfly*) +- # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF +- # conventions +- _LT_AC_TAGVAR(ld_shlibs, $1)=yes +- ;; +- gnu*) +- ;; +- hpux9*) +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' +- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: +- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' +- _LT_AC_TAGVAR(hardcode_direct, $1)=yes +- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, +- # but as the default +- # location of the library. +- +- case $cc_basename in +- CC*) +- # FIXME: insert proper C++ library support +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- ;; +- aCC*) +- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' +- # Commands to make compiler produce verbose output that lists +- # what "hidden" libraries, object files and flags are used when +- # linking a shared library. +- # +- # There doesn't appear to be a way to prevent this compiler from +- # explicitly linking system object files so we need to strip them +- # from the output so that they don't get included in the library +- # dependencies. +- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[[-]]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' +- ;; +- *) +- if test "$GXX" = yes; then +- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' +- else +- # FIXME: insert proper C++ library support +- _LT_AC_TAGVAR(ld_shlibs, $1)=no ++ # AIX 5 now supports IA64 processor ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + fi + ;; +- esac +- ;; +- hpux10*|hpux11*) +- if test $with_gnu_ld = no; then +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' +- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + ++ amigaos*) + case $host_cpu in +- hppa*64*|ia64*) ;; +- *) +- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ++ powerpc) ++ # see comment about AmigaOS4 .so support ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ++ ;; ++ m68k) ++ # FIXME: we need at least 68020 code to build shared libraries, but ++ # adding the `-m68020' flag to GCC prevents building anything better, ++ # like `-m68040'. ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' + ;; + esac +- fi +- case $host_cpu in +- hppa*64*|ia64*) +- _LT_AC_TAGVAR(hardcode_direct, $1)=no +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ++ ;; ++ ++ beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) ++ # PIC is the default for these OSes. ++ ;; ++ mingw* | cygwin* | os2* | pw32*) ++ # This hack is so that the source file can tell whether it is being ++ # built for inclusion in a dll (and should export symbols for example). ++ # Although the cygwin gcc ignores -fPIC, still need this for old-style ++ # (--disable-auto-import) libraries ++ m4_if([$1], [GCJ], [], ++ [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) ++ ;; ++ darwin* | rhapsody*) ++ # PIC is the default on this platform ++ # Common symbols not allowed in MH_DYLIB files ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' ++ ;; ++ *djgpp*) ++ # DJGPP does not support shared libraries at all ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)= ++ ;; ++ interix[[3-9]]*) ++ # Interix 3.x gcc -fpic/-fPIC options generate broken code. ++ # Instead, we relocate shared libraries at runtime. ++ ;; ++ sysv4*MP*) ++ if test -d /usr/nec; then ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic ++ fi ++ ;; ++ hpux*) ++ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but ++ # not for PA HP-UX. ++ case $host_cpu in ++ hppa*64*|ia64*) ++ ;; ++ *) ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ++ ;; ++ esac ++ ;; ++ *qnx* | *nto*) ++ # QNX uses GNU C++, but need to define -shared option too, otherwise ++ # it will coredump. ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' + ;; + *) +- _LT_AC_TAGVAR(hardcode_direct, $1)=yes +- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, +- # but as the default +- # location of the library. ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + esac +- +- case $cc_basename in +- CC*) +- # FIXME: insert proper C++ library support +- _LT_AC_TAGVAR(ld_shlibs, $1)=no ++ else ++ case $host_os in ++ aix[[4-9]]*) ++ # All AIX code is PIC. ++ if test "$host_cpu" = ia64; then ++ # AIX 5 now supports IA64 processor ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ else ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' ++ fi + ;; +- aCC*) +- case $host_cpu in +- hppa*64*) +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' +- ;; +- ia64*) +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' +- ;; +- *) +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ++ chorus*) ++ case $cc_basename in ++ cxch68*) ++ # Green Hills C++ Compiler ++ # _LT_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" + ;; + esac +- # Commands to make compiler produce verbose output that lists +- # what "hidden" libraries, object files and flags are used when +- # linking a shared library. +- # +- # There doesn't appear to be a way to prevent this compiler from +- # explicitly linking system object files so we need to strip them +- # from the output so that they don't get included in the library +- # dependencies. +- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + ;; +- *) +- if test "$GXX" = yes; then +- if test $with_gnu_ld = no; then ++ dgux*) ++ case $cc_basename in ++ ec++*) ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ++ ;; ++ ghcx*) ++ # Green Hills C++ Compiler ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' ++ ;; ++ *) ++ ;; ++ esac ++ ;; ++ freebsd* | dragonfly*) ++ # FreeBSD uses GNU C++ ++ ;; ++ hpux9* | hpux10* | hpux11*) ++ case $cc_basename in ++ CC*) ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' ++ if test "$host_cpu" != ia64; then ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' ++ fi ++ ;; ++ aCC*) ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' + case $host_cpu in +- hppa*64*) +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' +- ;; +- ia64*) +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ++ hppa*64*|ia64*) ++ # +Z the default + ;; + *) +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' + ;; + esac +- fi +- else +- # FIXME: insert proper C++ library support +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- fi +- ;; +- esac +- ;; +- interix[[3-9]]*) +- _LT_AC_TAGVAR(hardcode_direct, $1)=no +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' +- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' +- # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. +- # Instead, shared libraries are loaded at an image base (0x10000000 by +- # default) and relocated if they conflict, which is a slow very memory +- # consuming and fragmenting process. To avoid this, we pick a random, +- # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link +- # time. Moving up from 0x10000000 also allows more sbrk(2) space. +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' +- ;; +- irix5* | irix6*) +- case $cc_basename in +- CC*) +- # SGI C++ +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' +- +- # Archives containing C++ object files must be created using +- # "CC -ar", where "CC" is the IRIX C++ compiler. This is +- # necessary to make sure instantiated templates are included +- # in the archive. +- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs' ++ ;; ++ *) ++ ;; ++ esac + ;; +- *) +- if test "$GXX" = yes; then +- if test "$with_gnu_ld" = no; then +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' +- else +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib' +- fi +- fi +- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes ++ interix*) ++ # This is c89, which is MS Visual C++ (no shared libs) ++ # Anyone wants to do a port? + ;; +- esac +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' +- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: +- ;; +- linux* | k*bsd*-gnu) +- case $cc_basename in +- KCC*) +- # Kuck and Associates, Inc. (KAI) C++ Compiler +- +- # KCC will only create a shared library if the output file +- # ends with ".so" (or ".sl" for HP-UX), so rename the library +- # to its proper name (with version) after linking. +- _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' +- # Commands to make compiler produce verbose output that lists +- # what "hidden" libraries, object files and flags are used when +- # linking a shared library. +- # +- # There doesn't appear to be a way to prevent this compiler from +- # explicitly linking system object files so we need to strip them +- # from the output so that they don't get included in the library +- # dependencies. +- output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' +- +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath,$libdir' +- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' +- +- # Archives containing C++ object files must be created using +- # "CC -Bstatic", where "CC" is the KAI C++ compiler. +- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' +- ;; +- icpc*) +- # Intel C++ +- with_gnu_ld=yes +- # version 8.0 and above of icpc choke on multiply defined symbols +- # if we add $predep_objects and $postdep_objects, however 7.1 and +- # earlier do not add the objects themselves. +- case `$CC -V 2>&1` in +- *"Version 7."*) +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' +- ;; +- *) # Version 8.0 or newer +- tmp_idyn= +- case $host_cpu in +- ia64*) tmp_idyn=' -i_dynamic';; +- esac +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' +- ;; ++ irix5* | irix6* | nonstopux*) ++ case $cc_basename in ++ CC*) ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ++ # CC pic flag -KPIC is the default. ++ ;; ++ *) ++ ;; + esac +- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' +- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' +- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' +- ;; +- pgCC* | pgcpp*) +- # Portland Group C++ compiler +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' +- +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' +- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' +- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' +- ;; +- cxx*) +- # Compaq C++ +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' +- +- runpath_var=LD_RUN_PATH +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' +- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: +- +- # Commands to make compiler produce verbose output that lists +- # what "hidden" libraries, object files and flags are used when +- # linking a shared library. +- # +- # There doesn't appear to be a way to prevent this compiler from +- # explicitly linking system object files so we need to strip them +- # from the output so that they don't get included in the library +- # dependencies. +- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + ;; +- *) +- case `$CC -V 2>&1 | sed 5q` in +- *Sun\ C*) +- # Sun C++ 5.9 +- _LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs' +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols' +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' +- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' +- +- # Not sure whether something based on +- # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 +- # would be better. +- output_verbose_link_cmd='echo' +- +- # Archives containing C++ object files must be created using +- # "CC -xar", where "CC" is the Sun C++ compiler. This is +- # necessary to make sure instantiated templates are included +- # in the archive. +- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' +- ;; ++ linux* | k*bsd*-gnu) ++ case $cc_basename in ++ KCC*) ++ # KAI C++ Compiler ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ++ ;; ++ icpc* | ecpc* ) ++ # Intel C++ ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' ++ ;; ++ pgCC* | pgcpp*) ++ # Portland Group C++ compiler ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ ;; ++ cxx*) ++ # Compaq C++ ++ # Make sure the PIC flag is empty. It appears that all Alpha ++ # Linux and Compaq Tru64 Unix objects are PIC. ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)= ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ++ ;; ++ xlc* | xlC*) ++ # IBM XL 8.0 on PPC ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink' ++ ;; ++ *) ++ case `$CC -V 2>&1 | sed 5q` in ++ *Sun\ C*) ++ # Sun C++ 5.9 ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' ++ ;; ++ esac ++ ;; + esac + ;; +- esac +- ;; +- lynxos*) +- # FIXME: insert proper C++ library support +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- ;; +- m88k*) +- # FIXME: insert proper C++ library support +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- ;; +- mvs*) +- case $cc_basename in +- cxx*) +- # FIXME: insert proper C++ library support +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- ;; +- *) +- # FIXME: insert proper C++ library support +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- ;; +- esac +- ;; +- netbsd*) +- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' +- wlarc= +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' +- _LT_AC_TAGVAR(hardcode_direct, $1)=yes +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- fi +- # Workaround some broken pre-1.5 toolchains +- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' +- ;; +- openbsd2*) +- # C++ shared libraries are fairly broken +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- ;; +- openbsd*) +- if test -f /usr/libexec/ld.so; then +- _LT_AC_TAGVAR(hardcode_direct, $1)=yes +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' +- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib' +- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' +- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' +- fi +- output_verbose_link_cmd='echo' +- else +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- fi +- ;; +- osf3*) +- case $cc_basename in +- KCC*) +- # Kuck and Associates, Inc. (KAI) C++ Compiler +- +- # KCC will only create a shared library if the output file +- # ends with ".so" (or ".sl" for HP-UX), so rename the library +- # to its proper name (with version) after linking. +- _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' +- +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' +- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: +- +- # Archives containing C++ object files must be created using +- # "CC -Bstatic", where "CC" is the KAI C++ compiler. +- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' +- +- ;; +- RCC*) +- # Rational C++ 2.4.1 +- # FIXME: insert proper C++ library support +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- ;; +- cxx*) +- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' +- +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' +- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: +- +- # Commands to make compiler produce verbose output that lists +- # what "hidden" libraries, object files and flags are used when +- # linking a shared library. +- # +- # There doesn't appear to be a way to prevent this compiler from +- # explicitly linking system object files so we need to strip them +- # from the output so that they don't get included in the library +- # dependencies. +- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' ++ lynxos*) + ;; +- *) +- if test "$GXX" = yes && test "$with_gnu_ld" = no; then +- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' +- +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' +- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: +- +- # Commands to make compiler produce verbose output that lists +- # what "hidden" libraries, object files and flags are used when +- # linking a shared library. +- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' +- +- else +- # FIXME: insert proper C++ library support +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- fi ++ m88k*) + ;; +- esac +- ;; +- osf4* | osf5*) +- case $cc_basename in +- KCC*) +- # Kuck and Associates, Inc. (KAI) C++ Compiler +- +- # KCC will only create a shared library if the output file +- # ends with ".so" (or ".sl" for HP-UX), so rename the library +- # to its proper name (with version) after linking. +- _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' +- +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' +- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: +- +- # Archives containing C++ object files must be created using +- # the KAI C++ compiler. +- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' +- ;; +- RCC*) +- # Rational C++ 2.4.1 +- # FIXME: insert proper C++ library support +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- ;; +- cxx*) +- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ +- echo "-hidden">> $lib.exp~ +- $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~ +- $rm $lib.exp' +- +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' +- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: +- +- # Commands to make compiler produce verbose output that lists +- # what "hidden" libraries, object files and flags are used when +- # linking a shared library. +- # +- # There doesn't appear to be a way to prevent this compiler from +- # explicitly linking system object files so we need to strip them +- # from the output so that they don't get included in the library +- # dependencies. +- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' ++ mvs*) ++ case $cc_basename in ++ cxx*) ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall' ++ ;; ++ *) ++ ;; ++ esac + ;; +- *) +- if test "$GXX" = yes && test "$with_gnu_ld" = no; then +- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' +- +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' +- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: +- +- # Commands to make compiler produce verbose output that lists +- # what "hidden" libraries, object files and flags are used when +- # linking a shared library. +- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' +- +- else +- # FIXME: insert proper C++ library support +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- fi ++ netbsd* | netbsdelf*-gnu) + ;; +- esac +- ;; +- psos*) +- # FIXME: insert proper C++ library support +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- ;; +- sunos4*) +- case $cc_basename in +- CC*) +- # Sun C++ 4.x +- # FIXME: insert proper C++ library support +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- ;; +- lcc*) +- # Lucid +- # FIXME: insert proper C++ library support +- _LT_AC_TAGVAR(ld_shlibs, $1)=no ++ *qnx* | *nto*) ++ # QNX uses GNU C++, but need to define -shared option too, otherwise ++ # it will coredump. ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' ++ ;; ++ osf3* | osf4* | osf5*) ++ case $cc_basename in ++ KCC*) ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' ++ ;; ++ RCC*) ++ # Rational C++ 2.4.1 ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' ++ ;; ++ cxx*) ++ # Digital/Compaq C++ ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ # Make sure the PIC flag is empty. It appears that all Alpha ++ # Linux and Compaq Tru64 Unix objects are PIC. ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)= ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ++ ;; ++ *) ++ ;; ++ esac + ;; +- *) +- # FIXME: insert proper C++ library support +- _LT_AC_TAGVAR(ld_shlibs, $1)=no ++ psos*) + ;; +- esac +- ;; +- solaris*) +- case $cc_basename in +- CC*) +- # Sun C++ 4.2, 5.x and Centerline C++ +- _LT_AC_TAGVAR(archive_cmds_need_lc,$1)=yes +- _LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs' +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ +- $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' +- +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- case $host_os in +- solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; ++ solaris*) ++ case $cc_basename in ++ CC*) ++ # Sun C++ 4.2, 5.x and Centerline C++ ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' ++ ;; ++ gcx*) ++ # Green Hills C++ Compiler ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' ++ ;; + *) +- # The compiler driver will combine and reorder linker options, +- # but understands `-z linker_flag'. +- # Supported since Solaris 2.6 (maybe 2.5.1?) +- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' + ;; + esac +- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes +- +- output_verbose_link_cmd='echo' +- +- # Archives containing C++ object files must be created using +- # "CC -xar", where "CC" is the Sun C++ compiler. This is +- # necessary to make sure instantiated templates are included +- # in the archive. +- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' +- ;; +- gcx*) +- # Green Hills C++ Compiler +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' +- +- # The C++ compiler must be used to create the archive. +- _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs' + ;; +- *) +- # GNU C++ compiler with Solaris linker +- if test "$GXX" = yes && test "$with_gnu_ld" = no; then +- _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs' +- if $CC --version | grep -v '^2\.7' > /dev/null; then +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ +- $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' +- +- # Commands to make compiler produce verbose output that lists +- # what "hidden" libraries, object files and flags are used when +- # linking a shared library. +- output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\"" +- else +- # g++ 2.7 appears to require `-G' NOT `-shared' on this +- # platform. +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ +- $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' +- +- # Commands to make compiler produce verbose output that lists +- # what "hidden" libraries, object files and flags are used when +- # linking a shared library. +- output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\"" +- fi +- +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir' +- case $host_os in +- solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; ++ sunos4*) ++ case $cc_basename in ++ CC*) ++ # Sun C++ 4.x ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ ;; ++ lcc*) ++ # Lucid ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' ++ ;; + *) +- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' + ;; +- esac +- fi ++ esac + ;; +- esac +- ;; +- sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) +- _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' +- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- runpath_var='LD_RUN_PATH' +- +- case $cc_basename in +- CC*) +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) ++ case $cc_basename in ++ CC*) ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ ;; ++ esac + ;; +- *) +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ tandem*) ++ case $cc_basename in ++ NCC*) ++ # NonStop-UX NCC 3.20 ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ++ ;; ++ *) ++ ;; ++ esac + ;; +- esac +- ;; +- sysv5* | sco3.2v5* | sco5v6*) +- # Note: We can NOT use -z defs as we might desire, because we do not +- # link with -lc, and that would cause any symbols used from libc to +- # always be unresolved, which means just about no library would +- # ever link correctly. If we're not using GNU ld we use -z text +- # though, which does catch some bad symbols but isn't as heavy-handed +- # as -z defs. +- # For security reasons, it is highly recommended that you always +- # use absolute paths for naming shared libraries, and exclude the +- # DT_RUNPATH tag from executables and libraries. But doing so +- # requires that you compile everything twice, which is a pain. +- # So that behaviour is only enabled if SCOABSPATH is set to a +- # non-empty value in the environment. Most likely only useful for +- # creating official distributions of packages. +- # This is a hack until libtool officially supports absolute path +- # names for shared libraries. +- _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' +- _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' +- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' +- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':' +- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes +- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' +- runpath_var='LD_RUN_PATH' +- +- case $cc_basename in +- CC*) +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ vxworks*) + ;; + *) +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no + ;; + esac +- ;; +- tandem*) +- case $cc_basename in +- NCC*) +- # NonStop-UX NCC 3.20 +- # FIXME: insert proper C++ library support +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- ;; +- *) +- # FIXME: insert proper C++ library support +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- ;; +- esac +- ;; +- vxworks*) +- # FIXME: insert proper C++ library support +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- ;; +- *) +- # FIXME: insert proper C++ library support +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- ;; +-esac +-AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)]) +-test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no +- +-_LT_AC_TAGVAR(GCC, $1)="$GXX" +-_LT_AC_TAGVAR(LD, $1)="$LD" ++ fi ++], ++[ ++ if test "$GCC" = yes; then ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' + +-AC_LIBTOOL_POSTDEP_PREDEP($1) +-AC_LIBTOOL_PROG_COMPILER_PIC($1) +-AC_LIBTOOL_PROG_CC_C_O($1) +-AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1) +-AC_LIBTOOL_PROG_LD_SHLIBS($1) +-AC_LIBTOOL_SYS_DYNAMIC_LINKER($1) +-AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1) ++ case $host_os in ++ aix*) ++ # All AIX code is PIC. ++ if test "$host_cpu" = ia64; then ++ # AIX 5 now supports IA64 processor ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ fi ++ ;; + +-AC_LIBTOOL_CONFIG($1) ++ amigaos*) ++ case $host_cpu in ++ powerpc) ++ # see comment about AmigaOS4 .so support ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ++ ;; ++ m68k) ++ # FIXME: we need at least 68020 code to build shared libraries, but ++ # adding the `-m68020' flag to GCC prevents building anything better, ++ # like `-m68040'. ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' ++ ;; ++ esac ++ ;; + +-AC_LANG_POP +-CC=$lt_save_CC +-LDCXX=$LD +-LD=$lt_save_LD +-GCC=$lt_save_GCC +-with_gnu_ldcxx=$with_gnu_ld +-with_gnu_ld=$lt_save_with_gnu_ld +-lt_cv_path_LDCXX=$lt_cv_path_LD +-lt_cv_path_LD=$lt_save_path_LD +-lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld +-lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld +-])# AC_LIBTOOL_LANG_CXX_CONFIG ++ beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) ++ # PIC is the default for these OSes. ++ ;; + +-# AC_LIBTOOL_POSTDEP_PREDEP([TAGNAME]) +-# ------------------------------------ +-# Figure out "hidden" library dependencies from verbose +-# compiler output when linking a shared library. +-# Parse the compiler output and extract the necessary +-# objects, libraries and library flags. +-AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP], +-[AC_REQUIRE([LT_AC_PROG_SED])dnl +-dnl we can't use the lt_simple_compile_test_code here, +-dnl because it contains code intended for an executable, +-dnl not a library. It's possible we should let each +-dnl tag define a new lt_????_link_test_code variable, +-dnl but it's only used here... +-ifelse([$1],[],[cat > conftest.$ac_ext < conftest.$ac_ext < conftest.$ac_ext < conftest.$ac_ext <&1 | sed 5q` in ++ *Sun\ C*) ++ # Sun C 5.9 ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ ;; ++ *Sun\ F*) ++ # Sun Fortran 8.3 passes all unrecognized flags to the linker ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='' ++ ;; ++ esac ++ ;; ++ esac ++ ;; + +-_LT_AC_TAGVAR(compiler_lib_search_dirs, $1)= +-if test -n "$_LT_AC_TAGVAR(compiler_lib_search_path, $1)"; then +- _LT_AC_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_AC_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'` +-fi ++ newsos6) ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ ;; + +-# PORTME: override above test on systems where it is broken +-ifelse([$1],[CXX], +-[case $host_os in +-interix[[3-9]]*) +- # Interix 3.5 installs completely hosed .la files for C++, so rather than +- # hack all around it, let's just trust "g++" to DTRT. +- _LT_AC_TAGVAR(predep_objects,$1)= +- _LT_AC_TAGVAR(postdep_objects,$1)= +- _LT_AC_TAGVAR(postdeps,$1)= +- ;; ++ *nto* | *qnx*) ++ # QNX uses GNU C++, but need to define -shared option too, otherwise ++ # it will coredump. ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' ++ ;; + +-linux*) +- case `$CC -V 2>&1 | sed 5q` in +- *Sun\ C*) +- # Sun C++ 5.9 +- # +- # The more standards-conforming stlport4 library is +- # incompatible with the Cstd library. Avoid specifying +- # it if it's in CXXFLAGS. Ignore libCrun as +- # -library=stlport4 depends on it. +- case " $CXX $CXXFLAGS " in +- *" -library=stlport4 "*) +- solaris_use_stlport4=yes ++ osf3* | osf4* | osf5*) ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ # All OSF/1 code is PIC. ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; +- esac +- if test "$solaris_use_stlport4" != yes; then +- _LT_AC_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun' +- fi +- ;; +- esac +- ;; + +-solaris*) +- case $cc_basename in +- CC*) +- # The more standards-conforming stlport4 library is +- # incompatible with the Cstd library. Avoid specifying +- # it if it's in CXXFLAGS. Ignore libCrun as +- # -library=stlport4 depends on it. +- case " $CXX $CXXFLAGS " in +- *" -library=stlport4 "*) +- solaris_use_stlport4=yes ++ rdos*) ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; +- esac + +- # Adding this requires a known-good setup of shared libraries for +- # Sun compiler versions before 5.6, else PIC objects from an old +- # archive will be linked into the output, leading to subtle bugs. +- if test "$solaris_use_stlport4" != yes; then +- _LT_AC_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun' +- fi +- ;; +- esac +- ;; +-esac +-]) +-case " $_LT_AC_TAGVAR(postdeps, $1) " in +-*" -lc "*) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ;; +-esac +-])# AC_LIBTOOL_POSTDEP_PREDEP +- +-# AC_LIBTOOL_LANG_F77_CONFIG +-# -------------------------- +-# Ensure that the configuration vars for the C compiler are +-# suitably defined. Those variables are subsequently used by +-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. +-AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG], [_LT_AC_LANG_F77_CONFIG(F77)]) +-AC_DEFUN([_LT_AC_LANG_F77_CONFIG], +-[AC_REQUIRE([AC_PROG_F77]) +-AC_LANG_PUSH(Fortran 77) ++ solaris*) ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ case $cc_basename in ++ f77* | f90* | f95*) ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';; ++ *) ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';; ++ esac ++ ;; + +-_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no +-_LT_AC_TAGVAR(allow_undefined_flag, $1)= +-_LT_AC_TAGVAR(always_export_symbols, $1)=no +-_LT_AC_TAGVAR(archive_expsym_cmds, $1)= +-_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)= +-_LT_AC_TAGVAR(hardcode_direct, $1)=no +-_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= +-_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= +-_LT_AC_TAGVAR(hardcode_libdir_separator, $1)= +-_LT_AC_TAGVAR(hardcode_minus_L, $1)=no +-_LT_AC_TAGVAR(hardcode_automatic, $1)=no +-_LT_AC_TAGVAR(module_cmds, $1)= +-_LT_AC_TAGVAR(module_expsym_cmds, $1)= +-_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown +-_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds +-_LT_AC_TAGVAR(no_undefined_flag, $1)= +-_LT_AC_TAGVAR(whole_archive_flag_spec, $1)= +-_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no ++ sunos4*) ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ ;; + +-# Source file extension for f77 test sources. +-ac_ext=f ++ sysv4 | sysv4.2uw2* | sysv4.3*) ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ ;; + +-# Object file extension for compiled f77 test sources. +-objext=o +-_LT_AC_TAGVAR(objext, $1)=$objext ++ sysv4*MP*) ++ if test -d /usr/nec ;then ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ fi ++ ;; + +-# Code to be used in simple compile tests +-lt_simple_compile_test_code="\ +- subroutine t +- return +- end +-" ++ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ ;; + +-# Code to be used in simple link tests +-lt_simple_link_test_code="\ +- program t +- end +-" ++ unicos*) ++ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no ++ ;; + +-# ltmain only uses $CC for tagged configurations so make sure $CC is set. +-_LT_AC_SYS_COMPILER ++ uts4*) ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' ++ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ ;; + +-# save warnings/boilerplate of simple test code +-_LT_COMPILER_BOILERPLATE +-_LT_LINKER_BOILERPLATE ++ *) ++ _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no ++ ;; ++ esac ++ fi ++]) ++case $host_os in ++ # For platforms which do not support PIC, -DPIC is meaningless: ++ *djgpp*) ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)= ++ ;; ++ *) ++ _LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])" ++ ;; ++esac ++AC_MSG_RESULT([$_LT_TAGVAR(lt_prog_compiler_pic, $1)]) ++_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1], ++ [How to pass a linker flag through the compiler]) + +-# Allow CC to be a program name with arguments. +-lt_save_CC="$CC" +-CC=${F77-"f77"} +-compiler=$CC +-_LT_AC_TAGVAR(compiler, $1)=$CC +-_LT_CC_BASENAME([$compiler]) ++# ++# Check to make sure the PIC flag actually works. ++# ++if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then ++ _LT_COMPILER_OPTION([if $compiler PIC flag $_LT_TAGVAR(lt_prog_compiler_pic, $1) works], ++ [_LT_TAGVAR(lt_cv_prog_compiler_pic_works, $1)], ++ [$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])], [], ++ [case $_LT_TAGVAR(lt_prog_compiler_pic, $1) in ++ "" | " "*) ;; ++ *) _LT_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_TAGVAR(lt_prog_compiler_pic, $1)" ;; ++ esac], ++ [_LT_TAGVAR(lt_prog_compiler_pic, $1)= ++ _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no]) ++fi ++_LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1], ++ [Additional compiler flags for building library objects]) + +-AC_MSG_CHECKING([if libtool supports shared libraries]) +-AC_MSG_RESULT([$can_build_shared]) ++# ++# Check to make sure the static flag actually works. ++# ++wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_TAGVAR(lt_prog_compiler_static, $1)\" ++_LT_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works], ++ _LT_TAGVAR(lt_cv_prog_compiler_static_works, $1), ++ $lt_tmp_static_flag, ++ [], ++ [_LT_TAGVAR(lt_prog_compiler_static, $1)=]) ++_LT_TAGDECL([link_static_flag], [lt_prog_compiler_static], [1], ++ [Compiler flag to prevent dynamic linking]) ++])# _LT_COMPILER_PIC + +-AC_MSG_CHECKING([whether to build shared libraries]) +-test "$can_build_shared" = "no" && enable_shared=no + +-# On AIX, shared libraries and static libraries use the same namespace, and +-# are all built from PIC. +-case $host_os in +-aix3*) +- test "$enable_shared" = yes && enable_static=no +- if test -n "$RANLIB"; then +- archive_cmds="$archive_cmds~\$RANLIB \$lib" +- postinstall_cmds='$RANLIB $lib' +- fi ++# _LT_LINKER_SHLIBS([TAGNAME]) ++# ---------------------------- ++# See if the linker supports building shared libraries. ++m4_defun([_LT_LINKER_SHLIBS], ++[AC_REQUIRE([LT_PATH_LD])dnl ++AC_REQUIRE([LT_PATH_NM])dnl ++m4_require([_LT_FILEUTILS_DEFAULTS])dnl ++m4_require([_LT_DECL_EGREP])dnl ++m4_require([_LT_DECL_SED])dnl ++m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl ++m4_require([_LT_TAG_COMPILER])dnl ++AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) ++m4_if([$1], [CXX], [ ++ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' ++ case $host_os in ++ aix[[4-9]]*) ++ # If we're using GNU nm, then we don't want the "-C" option. ++ # -C means demangle to AIX nm, but means don't demangle with GNU nm ++ if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then ++ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' ++ else ++ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' ++ fi ++ ;; ++ pw32*) ++ _LT_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds" + ;; +-aix[[4-9]]*) +- if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then +- test "$enable_shared" = yes && enable_static=no +- fi ++ cygwin* | mingw*) ++ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;/^.*[[ ]]__nm__/s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols' + ;; +-esac +-AC_MSG_RESULT([$enable_shared]) +- +-AC_MSG_CHECKING([whether to build static libraries]) +-# Make sure either enable_shared or enable_static is yes. +-test "$enable_shared" = yes || enable_static=yes +-AC_MSG_RESULT([$enable_static]) +- +-_LT_AC_TAGVAR(GCC, $1)="$G77" +-_LT_AC_TAGVAR(LD, $1)="$LD" +- +-AC_LIBTOOL_PROG_COMPILER_PIC($1) +-AC_LIBTOOL_PROG_CC_C_O($1) +-AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1) +-AC_LIBTOOL_PROG_LD_SHLIBS($1) +-AC_LIBTOOL_SYS_DYNAMIC_LINKER($1) +-AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1) +- +-AC_LIBTOOL_CONFIG($1) ++ linux* | k*bsd*-gnu) ++ _LT_TAGVAR(link_all_deplibs, $1)=no ++ ;; ++ *) ++ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' ++ ;; ++ esac ++ _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] ++], [ ++ runpath_var= ++ _LT_TAGVAR(allow_undefined_flag, $1)= ++ _LT_TAGVAR(always_export_symbols, $1)=no ++ _LT_TAGVAR(archive_cmds, $1)= ++ _LT_TAGVAR(archive_expsym_cmds, $1)= ++ _LT_TAGVAR(compiler_needs_object, $1)=no ++ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)= ++ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' ++ _LT_TAGVAR(hardcode_automatic, $1)=no ++ _LT_TAGVAR(hardcode_direct, $1)=no ++ _LT_TAGVAR(hardcode_direct_absolute, $1)=no ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= ++ _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= ++ _LT_TAGVAR(hardcode_libdir_separator, $1)= ++ _LT_TAGVAR(hardcode_minus_L, $1)=no ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported ++ _LT_TAGVAR(inherit_rpath, $1)=no ++ _LT_TAGVAR(link_all_deplibs, $1)=unknown ++ _LT_TAGVAR(module_cmds, $1)= ++ _LT_TAGVAR(module_expsym_cmds, $1)= ++ _LT_TAGVAR(old_archive_from_new_cmds, $1)= ++ _LT_TAGVAR(old_archive_from_expsyms_cmds, $1)= ++ _LT_TAGVAR(thread_safe_flag_spec, $1)= ++ _LT_TAGVAR(whole_archive_flag_spec, $1)= ++ # include_expsyms should be a list of space-separated symbols to be *always* ++ # included in the symbol list ++ _LT_TAGVAR(include_expsyms, $1)= ++ # exclude_expsyms can be an extended regexp of symbols to exclude ++ # it will be wrapped by ` (' and `)$', so one must not match beginning or ++ # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', ++ # as well as any symbol that contains `d'. ++ _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] ++ # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out ++ # platforms (ab)use it in PIC code, but their linkers get confused if ++ # the symbol is explicitly referenced. Since portable code cannot ++ # rely on this symbol name, it's probably fine to never include it in ++ # preloaded symbol tables. ++ # Exclude shared library initialization/finalization symbols. ++dnl Note also adjust exclude_expsyms for C++ above. ++ extract_expsyms_cmds= + +-AC_LANG_POP +-CC="$lt_save_CC" +-])# AC_LIBTOOL_LANG_F77_CONFIG ++ case $host_os in ++ cygwin* | mingw* | pw32*) ++ # FIXME: the MSVC++ port hasn't been tested in a loooong time ++ # When not using gcc, we currently assume that we are using ++ # Microsoft Visual C++. ++ if test "$GCC" != yes; then ++ with_gnu_ld=no ++ fi ++ ;; ++ interix*) ++ # we just hope/assume this is gcc and not c89 (= MSVC++) ++ with_gnu_ld=yes ++ ;; ++ openbsd*) ++ with_gnu_ld=no ++ ;; ++ esac + ++ _LT_TAGVAR(ld_shlibs, $1)=yes ++ if test "$with_gnu_ld" = yes; then ++ # If archive_cmds runs LD, not CC, wlarc should be empty ++ wlarc='${wl}' + +-# AC_LIBTOOL_LANG_GCJ_CONFIG +-# -------------------------- +-# Ensure that the configuration vars for the C compiler are +-# suitably defined. Those variables are subsequently used by +-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. +-AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG], [_LT_AC_LANG_GCJ_CONFIG(GCJ)]) +-AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG], +-[AC_LANG_SAVE ++ # Set some defaults for GNU ld with shared library support. These ++ # are reset later if shared libraries are not supported. Putting them ++ # here allows them to be overridden if necessary. ++ runpath_var=LD_RUN_PATH ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' ++ # ancient GNU ld didn't support --whole-archive et. al. ++ if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then ++ _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' ++ else ++ _LT_TAGVAR(whole_archive_flag_spec, $1)= ++ fi ++ supports_anon_versioning=no ++ case `$LD -v 2>&1` in ++ *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11 ++ *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... ++ *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... ++ *\ 2.11.*) ;; # other 2.11 versions ++ *) supports_anon_versioning=yes ;; ++ esac + +-# Source file extension for Java test sources. +-ac_ext=java ++ # See if GNU ld supports shared libraries. ++ case $host_os in ++ aix[[3-9]]*) ++ # On AIX/PPC, the GNU linker is very broken ++ if test "$host_cpu" != ia64; then ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ cat <<_LT_EOF 1>&2 + +-# Object file extension for compiled Java test sources. +-objext=o +-_LT_AC_TAGVAR(objext, $1)=$objext ++*** Warning: the GNU linker, at least up to release 2.9.1, is reported ++*** to be unable to reliably create shared libraries on AIX. ++*** Therefore, libtool is disabling shared libraries support. If you ++*** really care for shared libraries, you may want to modify your PATH ++*** so that a non-GNU linker is found, and then restart. + +-# Code to be used in simple compile tests +-lt_simple_compile_test_code="class foo {}" ++_LT_EOF ++ fi ++ ;; + +-# Code to be used in simple link tests +-lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }' ++ amigaos*) ++ case $host_cpu in ++ powerpc) ++ # see comment about AmigaOS4 .so support ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='' ++ ;; ++ m68k) ++ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' ++ _LT_TAGVAR(hardcode_minus_L, $1)=yes ++ ;; ++ esac ++ ;; + +-# ltmain only uses $CC for tagged configurations so make sure $CC is set. +-_LT_AC_SYS_COMPILER ++ beos*) ++ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then ++ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported ++ # Joseph Beckenbach says some releases of gcc ++ # support --undefined. This deserves some investigation. FIXME ++ _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ else ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ fi ++ ;; + +-# save warnings/boilerplate of simple test code +-_LT_COMPILER_BOILERPLATE +-_LT_LINKER_BOILERPLATE ++ cygwin* | mingw* | pw32*) ++ # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, ++ # as there is no search path for DLLs. ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' ++ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported ++ _LT_TAGVAR(always_export_symbols, $1)=no ++ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes ++ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols' + +-# Allow CC to be a program name with arguments. +-lt_save_CC="$CC" +-CC=${GCJ-"gcj"} +-compiler=$CC +-_LT_AC_TAGVAR(compiler, $1)=$CC +-_LT_CC_BASENAME([$compiler]) ++ if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' ++ # If the export-symbols file already is a .def file (1st line ++ # is EXPORTS), use it as is; otherwise, prepend... ++ _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then ++ cp $export_symbols $output_objdir/$soname.def; ++ else ++ echo EXPORTS > $output_objdir/$soname.def; ++ cat $export_symbols >> $output_objdir/$soname.def; ++ fi~ ++ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' ++ else ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ fi ++ ;; + +-# GCJ did not exist at the time GCC didn't implicitly link libc in. +-_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ++ interix[[3-9]]*) ++ _LT_TAGVAR(hardcode_direct, $1)=no ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ++ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. ++ # Instead, shared libraries are loaded at an image base (0x10000000 by ++ # default) and relocated if they conflict, which is a slow very memory ++ # consuming and fragmenting process. To avoid this, we pick a random, ++ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link ++ # time. Moving up from 0x10000000 also allows more sbrk(2) space. ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ++ ;; + +-_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds ++ gnu* | linux* | tpf* | k*bsd*-gnu) ++ tmp_diet=no ++ if test "$host_os" = linux-dietlibc; then ++ case $cc_basename in ++ diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) ++ esac ++ fi ++ if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ ++ && test "$tmp_diet" = no ++ then ++ tmp_addflag= ++ tmp_sharedflag='-shared' ++ case $cc_basename,$host_cpu in ++ pgcc*) # Portland Group C compiler ++ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' ++ tmp_addflag=' $pic_flag' ++ ;; ++ pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers ++ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' ++ tmp_addflag=' $pic_flag -Mnomain' ;; ++ ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 ++ tmp_addflag=' -i_dynamic' ;; ++ efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 ++ tmp_addflag=' -i_dynamic -nofor_main' ;; ++ ifc* | ifort*) # Intel Fortran compiler ++ tmp_addflag=' -nofor_main' ;; ++ xl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below) ++ tmp_sharedflag='-qmkshrobj' ++ tmp_addflag= ;; ++ esac ++ case `$CC -V 2>&1 | sed 5q` in ++ *Sun\ C*) # Sun C 5.9 ++ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' ++ _LT_TAGVAR(compiler_needs_object, $1)=yes ++ tmp_sharedflag='-G' ;; ++ *Sun\ F*) # Sun Fortran 8.3 ++ tmp_sharedflag='-G' ;; ++ esac ++ _LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + +-AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1) +-AC_LIBTOOL_PROG_COMPILER_PIC($1) +-AC_LIBTOOL_PROG_CC_C_O($1) +-AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1) +-AC_LIBTOOL_PROG_LD_SHLIBS($1) +-AC_LIBTOOL_SYS_DYNAMIC_LINKER($1) +-AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1) ++ if test "x$supports_anon_versioning" = xyes; then ++ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ ++ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ ++ echo "local: *; };" >> $output_objdir/$libname.ver~ ++ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' ++ fi + +-AC_LIBTOOL_CONFIG($1) ++ case $cc_basename in ++ xlf*) ++ # IBM XL Fortran 10.1 on PPC cannot create shared libs itself ++ _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive' ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= ++ _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir' ++ _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib' ++ if test "x$supports_anon_versioning" = xyes; then ++ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ ++ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ ++ echo "local: *; };" >> $output_objdir/$libname.ver~ ++ $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' ++ fi ++ ;; ++ esac ++ else ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ fi ++ ;; + +-AC_LANG_RESTORE +-CC="$lt_save_CC" +-])# AC_LIBTOOL_LANG_GCJ_CONFIG ++ netbsd* | netbsdelf*-gnu) ++ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then ++ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' ++ wlarc= ++ else ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ fi ++ ;; + ++ solaris*) ++ if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ cat <<_LT_EOF 1>&2 + +-# AC_LIBTOOL_LANG_RC_CONFIG +-# ------------------------- +-# Ensure that the configuration vars for the Windows resource compiler are +-# suitably defined. Those variables are subsequently used by +-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. +-AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG], [_LT_AC_LANG_RC_CONFIG(RC)]) +-AC_DEFUN([_LT_AC_LANG_RC_CONFIG], +-[AC_LANG_SAVE +- +-# Source file extension for RC test sources. +-ac_ext=rc +- +-# Object file extension for compiled RC test sources. +-objext=o +-_LT_AC_TAGVAR(objext, $1)=$objext +- +-# Code to be used in simple compile tests +-lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }' +- +-# Code to be used in simple link tests +-lt_simple_link_test_code="$lt_simple_compile_test_code" +- +-# ltmain only uses $CC for tagged configurations so make sure $CC is set. +-_LT_AC_SYS_COMPILER +- +-# save warnings/boilerplate of simple test code +-_LT_COMPILER_BOILERPLATE +-_LT_LINKER_BOILERPLATE ++*** Warning: The releases 2.8.* of the GNU linker cannot reliably ++*** create shared libraries on Solaris systems. Therefore, libtool ++*** is disabling shared libraries support. We urge you to upgrade GNU ++*** binutils to release 2.9.1 or newer. Another option is to modify ++*** your PATH or compiler configuration so that the native linker is ++*** used, and then restart. + +-# Allow CC to be a program name with arguments. +-lt_save_CC="$CC" +-CC=${RC-"windres"} +-compiler=$CC +-_LT_AC_TAGVAR(compiler, $1)=$CC +-_LT_CC_BASENAME([$compiler]) +-_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes ++_LT_EOF ++ elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ else ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ fi ++ ;; + +-AC_LIBTOOL_CONFIG($1) ++ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) ++ case `$LD -v 2>&1` in ++ *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*) ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ cat <<_LT_EOF 1>&2 + +-AC_LANG_RESTORE +-CC="$lt_save_CC" +-])# AC_LIBTOOL_LANG_RC_CONFIG ++*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not ++*** reliably create shared libraries on SCO systems. Therefore, libtool ++*** is disabling shared libraries support. We urge you to upgrade GNU ++*** binutils to release 2.16.91.0.3 or newer. Another option is to modify ++*** your PATH or compiler configuration so that the native linker is ++*** used, and then restart. + ++_LT_EOF ++ ;; ++ *) ++ # For security reasons, it is highly recommended that you always ++ # use absolute paths for naming shared libraries, and exclude the ++ # DT_RUNPATH tag from executables and libraries. But doing so ++ # requires that you compile everything twice, which is a pain. ++ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ else ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ fi ++ ;; ++ esac ++ ;; + +-# AC_LIBTOOL_CONFIG([TAGNAME]) +-# ---------------------------- +-# If TAGNAME is not passed, then create an initial libtool script +-# with a default configuration from the untagged config vars. Otherwise +-# add code to config.status for appending the configuration named by +-# TAGNAME from the matching tagged config vars. +-AC_DEFUN([AC_LIBTOOL_CONFIG], +-[# The else clause should only fire when bootstrapping the +-# libtool distribution, otherwise you forgot to ship ltmain.sh +-# with your package, and you will get complaints that there are +-# no rules to generate ltmain.sh. +-if test -f "$ltmain"; then +- # See if we are running on zsh, and set the options which allow our commands through +- # without removal of \ escapes. +- if test -n "${ZSH_VERSION+set}" ; then +- setopt NO_GLOB_SUBST +- fi +- # Now quote all the things that may contain metacharacters while being +- # careful not to overquote the AC_SUBSTed values. We take copies of the +- # variables and quote the copies for generation of the libtool script. +- for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \ +- SED SHELL STRIP \ +- libname_spec library_names_spec soname_spec extract_expsyms_cmds \ +- old_striplib striplib file_magic_cmd finish_cmds finish_eval \ +- deplibs_check_method reload_flag reload_cmds need_locks \ +- lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ +- lt_cv_sys_global_symbol_to_c_name_address \ +- sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ +- old_postinstall_cmds old_postuninstall_cmds \ +- _LT_AC_TAGVAR(compiler, $1) \ +- _LT_AC_TAGVAR(CC, $1) \ +- _LT_AC_TAGVAR(LD, $1) \ +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1) \ +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1) \ +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1) \ +- _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) \ +- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1) \ +- _LT_AC_TAGVAR(thread_safe_flag_spec, $1) \ +- _LT_AC_TAGVAR(whole_archive_flag_spec, $1) \ +- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1) \ +- _LT_AC_TAGVAR(old_archive_cmds, $1) \ +- _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) \ +- _LT_AC_TAGVAR(predep_objects, $1) \ +- _LT_AC_TAGVAR(postdep_objects, $1) \ +- _LT_AC_TAGVAR(predeps, $1) \ +- _LT_AC_TAGVAR(postdeps, $1) \ +- _LT_AC_TAGVAR(compiler_lib_search_path, $1) \ +- _LT_AC_TAGVAR(compiler_lib_search_dirs, $1) \ +- _LT_AC_TAGVAR(archive_cmds, $1) \ +- _LT_AC_TAGVAR(archive_expsym_cmds, $1) \ +- _LT_AC_TAGVAR(postinstall_cmds, $1) \ +- _LT_AC_TAGVAR(postuninstall_cmds, $1) \ +- _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) \ +- _LT_AC_TAGVAR(allow_undefined_flag, $1) \ +- _LT_AC_TAGVAR(no_undefined_flag, $1) \ +- _LT_AC_TAGVAR(export_symbols_cmds, $1) \ +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) \ +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1) \ +- _LT_AC_TAGVAR(hardcode_libdir_separator, $1) \ +- _LT_AC_TAGVAR(hardcode_automatic, $1) \ +- _LT_AC_TAGVAR(module_cmds, $1) \ +- _LT_AC_TAGVAR(module_expsym_cmds, $1) \ +- _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) \ +- _LT_AC_TAGVAR(fix_srcfile_path, $1) \ +- _LT_AC_TAGVAR(exclude_expsyms, $1) \ +- _LT_AC_TAGVAR(include_expsyms, $1); do +- +- case $var in +- _LT_AC_TAGVAR(old_archive_cmds, $1) | \ +- _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) | \ +- _LT_AC_TAGVAR(archive_cmds, $1) | \ +- _LT_AC_TAGVAR(archive_expsym_cmds, $1) | \ +- _LT_AC_TAGVAR(module_cmds, $1) | \ +- _LT_AC_TAGVAR(module_expsym_cmds, $1) | \ +- _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) | \ +- _LT_AC_TAGVAR(export_symbols_cmds, $1) | \ +- extract_expsyms_cmds | reload_cmds | finish_cmds | \ +- postinstall_cmds | postuninstall_cmds | \ +- old_postinstall_cmds | old_postuninstall_cmds | \ +- sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) +- # Double-quote double-evaled strings. +- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" ++ sunos4*) ++ _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' ++ wlarc= ++ _LT_TAGVAR(hardcode_direct, $1)=yes ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; ++ + *) +- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" ++ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ else ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ fi + ;; + esac +- done +- +- case $lt_echo in +- *'\[$]0 --fallback-echo"') +- lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\[$]0 --fallback-echo"[$]/[$]0 --fallback-echo"/'` +- ;; +- esac +- +-ifelse([$1], [], +- [cfgfile="${ofile}T" +- trap "$rm \"$cfgfile\"; exit 1" 1 2 15 +- $rm -f "$cfgfile" +- AC_MSG_NOTICE([creating $ofile])], +- [cfgfile="$ofile"]) +- +- cat <<__EOF__ >> "$cfgfile" +-ifelse([$1], [], +-[#! $SHELL + +-# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services. +-# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP) +-# NOTE: Changes made to this file will be lost: look at ltmain.sh. +-# +-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 +-# Free Software Foundation, Inc. +-# +-# This file is part of GNU Libtool: +-# Originally by Gordon Matzigkeit , 1996 +-# +-# This program is free software; you can redistribute it and/or modify +-# it under the terms of the GNU General Public License as published by +-# the Free Software Foundation; either version 2 of the License, or +-# (at your option) any later version. +-# +-# This program is distributed in the hope that it will be useful, but +-# WITHOUT ANY WARRANTY; without even the implied warranty of +-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +-# General Public License for more details. +-# +-# You should have received a copy of the GNU General Public License +-# along with this program; if not, write to the Free Software +-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. +-# +-# As a special exception to the GNU General Public License, if you +-# distribute this file as part of a program that contains a +-# configuration script generated by Autoconf, you may include it under +-# the same distribution terms that you use for the rest of that program. +- +-# A sed program that does not truncate output. +-SED=$lt_SED +- +-# Sed that helps us avoid accidentally triggering echo(1) options like -n. +-Xsed="$SED -e 1s/^X//" +- +-# The HP-UX ksh and POSIX shell print the target directory to stdout +-# if CDPATH is set. +-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH +- +-# The names of the tagged configurations supported by this script. +-available_tags= +- +-# ### BEGIN LIBTOOL CONFIG], +-[# ### BEGIN LIBTOOL TAG CONFIG: $tagname]) +- +-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: +- +-# Shell to use when invoking shell scripts. +-SHELL=$lt_SHELL +- +-# Whether or not to build shared libraries. +-build_libtool_libs=$enable_shared +- +-# Whether or not to build static libraries. +-build_old_libs=$enable_static +- +-# Whether or not to add -lc for building shared libraries. +-build_libtool_need_lc=$_LT_AC_TAGVAR(archive_cmds_need_lc, $1) +- +-# Whether or not to disallow shared libs when runtime libs are static +-allow_libtool_libs_with_static_runtimes=$_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1) +- +-# Whether or not to optimize for fast installation. +-fast_install=$enable_fast_install +- +-# The host system. +-host_alias=$host_alias +-host=$host +-host_os=$host_os +- +-# The build system. +-build_alias=$build_alias +-build=$build +-build_os=$build_os +- +-# An echo program that does not interpret backslashes. +-echo=$lt_echo +- +-# The archiver. +-AR=$lt_AR +-AR_FLAGS=$lt_AR_FLAGS ++ if test "$_LT_TAGVAR(ld_shlibs, $1)" = no; then ++ runpath_var= ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)= ++ _LT_TAGVAR(whole_archive_flag_spec, $1)= ++ fi ++ else ++ # PORTME fill in a description of your system's linker (not GNU ld) ++ case $host_os in ++ aix3*) ++ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported ++ _LT_TAGVAR(always_export_symbols, $1)=yes ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' ++ # Note: this linker hardcodes the directories in LIBPATH if there ++ # are no directories specified by -L. ++ _LT_TAGVAR(hardcode_minus_L, $1)=yes ++ if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then ++ # Neither direct hardcoding nor static linking is supported with a ++ # broken collect2. ++ _LT_TAGVAR(hardcode_direct, $1)=unsupported ++ fi ++ ;; + +-# A C compiler. +-LTCC=$lt_LTCC ++ aix[[4-9]]*) ++ if test "$host_cpu" = ia64; then ++ # On IA64, the linker does run time linking by default, so we don't ++ # have to do anything special. ++ aix_use_runtimelinking=no ++ exp_sym_flag='-Bexport' ++ no_entry_flag="" ++ else ++ # If we're using GNU nm, then we don't want the "-C" option. ++ # -C means demangle to AIX nm, but means don't demangle with GNU nm ++ if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then ++ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' ++ else ++ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' ++ fi ++ aix_use_runtimelinking=no + +-# LTCC compiler flags. +-LTCFLAGS=$lt_LTCFLAGS ++ # Test if we are trying to use run time linking or normal ++ # AIX style linking. If -brtl is somewhere in LDFLAGS, we ++ # need to do runtime linking. ++ case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) ++ for ld_flag in $LDFLAGS; do ++ if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then ++ aix_use_runtimelinking=yes ++ break ++ fi ++ done ++ ;; ++ esac + +-# A language-specific compiler. +-CC=$lt_[]_LT_AC_TAGVAR(compiler, $1) ++ exp_sym_flag='-bexport' ++ no_entry_flag='-bnoentry' ++ fi + +-# Is the compiler the GNU C compiler? +-with_gcc=$_LT_AC_TAGVAR(GCC, $1) ++ # When large executables or shared objects are built, AIX ld can ++ # have problems creating the table of contents. If linking a library ++ # or program results in "error TOC overflow" add -mminimal-toc to ++ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not ++ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + +-# An ERE matcher. +-EGREP=$lt_EGREP ++ _LT_TAGVAR(archive_cmds, $1)='' ++ _LT_TAGVAR(hardcode_direct, $1)=yes ++ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes ++ _LT_TAGVAR(hardcode_libdir_separator, $1)=':' ++ _LT_TAGVAR(link_all_deplibs, $1)=yes ++ _LT_TAGVAR(file_list_spec, $1)='${wl}-f,' + +-# The linker used to build libraries. +-LD=$lt_[]_LT_AC_TAGVAR(LD, $1) ++ if test "$GCC" = yes; then ++ case $host_os in aix4.[[012]]|aix4.[[012]].*) ++ # We only want to do this on AIX 4.2 and lower, the check ++ # below for broken collect2 doesn't work under 4.3+ ++ collect2name=`${CC} -print-prog-name=collect2` ++ if test -f "$collect2name" && ++ strings "$collect2name" | $GREP resolve_lib_name >/dev/null ++ then ++ # We have reworked collect2 ++ : ++ else ++ # We have old collect2 ++ _LT_TAGVAR(hardcode_direct, $1)=unsupported ++ # It fails to find uninstalled libraries when the uninstalled ++ # path is not listed in the libpath. Setting hardcode_minus_L ++ # to unsupported forces relinking ++ _LT_TAGVAR(hardcode_minus_L, $1)=yes ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' ++ _LT_TAGVAR(hardcode_libdir_separator, $1)= ++ fi ++ ;; ++ esac ++ shared_flag='-shared' ++ if test "$aix_use_runtimelinking" = yes; then ++ shared_flag="$shared_flag "'${wl}-G' ++ fi ++ _LT_TAGVAR(link_all_deplibs, $1)=no ++ else ++ # not using gcc ++ if test "$host_cpu" = ia64; then ++ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release ++ # chokes on -Wl,-G. The following line is correct: ++ shared_flag='-G' ++ else ++ if test "$aix_use_runtimelinking" = yes; then ++ shared_flag='${wl}-G' ++ else ++ shared_flag='${wl}-bM:SRE' ++ fi ++ fi ++ fi + +-# Whether we need hard or soft links. +-LN_S=$lt_LN_S ++ # It seems that -bexpall does not export symbols beginning with ++ # underscore (_), so it is better to generate a list of symbols to export. ++ _LT_TAGVAR(always_export_symbols, $1)=yes ++ if test "$aix_use_runtimelinking" = yes; then ++ # Warning - without using the other runtime loading flags (-brtl), ++ # -berok will link without error, but may produce a broken library. ++ _LT_TAGVAR(allow_undefined_flag, $1)='-berok' ++ # Determine the default libpath from the value encoded in an ++ # empty executable. ++ _LT_SYS_MODULE_PATH_AIX ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" ++ else ++ if test "$host_cpu" = ia64; then ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' ++ _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs" ++ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" ++ else ++ # Determine the default libpath from the value encoded in an ++ # empty executable. ++ _LT_SYS_MODULE_PATH_AIX ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" ++ # Warning - without using the other run time loading flags, ++ # -berok will link without error, but may produce a broken library. ++ _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' ++ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' ++ # Exported symbols can be pulled into shared objects from archives ++ _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience' ++ _LT_TAGVAR(archive_cmds_need_lc, $1)=yes ++ # This is similar to how AIX traditionally builds its shared libraries. ++ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' ++ fi ++ fi ++ ;; + +-# A BSD-compatible nm program. +-NM=$lt_NM ++ amigaos*) ++ case $host_cpu in ++ powerpc) ++ # see comment about AmigaOS4 .so support ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='' ++ ;; ++ m68k) ++ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' ++ _LT_TAGVAR(hardcode_minus_L, $1)=yes ++ ;; ++ esac ++ ;; + +-# A symbol stripping program +-STRIP=$lt_STRIP ++ bsdi[[45]]*) ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic ++ ;; + +-# Used to examine libraries when file_magic_cmd begins "file" +-MAGIC_CMD=$MAGIC_CMD ++ cygwin* | mingw* | pw32*) ++ # When not using gcc, we currently assume that we are using ++ # Microsoft Visual C++. ++ # hardcode_libdir_flag_spec is actually meaningless, as there is ++ # no search path for DLLs. ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' ++ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported ++ # Tell ltmain to make .lib files, not .a files. ++ libext=lib ++ # Tell ltmain to make .dll files, not .so files. ++ shrext_cmds=".dll" ++ # FIXME: Setting linknames here is a bad hack. ++ _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `$ECHO "X$deplibs" | $Xsed -e '\''s/ -lc$//'\''` -link -dll~linknames=' ++ # The linker will automatically build a .lib file if we build a DLL. ++ _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' ++ # FIXME: Should let the user specify the lib program. ++ _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs' ++ _LT_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`' ++ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes ++ ;; + +-# Used on cygwin: DLL creation program. +-DLLTOOL="$DLLTOOL" ++ darwin* | rhapsody*) ++ _LT_DARWIN_LINKER_FEATURES($1) ++ ;; + +-# Used on cygwin: object dumper. +-OBJDUMP="$OBJDUMP" ++ dgux*) ++ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ ;; + +-# Used on cygwin: assembler. +-AS="$AS" ++ freebsd1*) ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; + +-# The name of the directory that contains temporary libtool files. +-objdir=$objdir ++ # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor ++ # support. Future versions do this automatically, but an explicit c++rt0.o ++ # does not break anything, and helps significantly (at the cost of a little ++ # extra space). ++ freebsd2.2*) ++ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' ++ _LT_TAGVAR(hardcode_direct, $1)=yes ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ ;; + +-# How to create reloadable object files. +-reload_flag=$lt_reload_flag +-reload_cmds=$lt_reload_cmds ++ # Unfortunately, older versions of FreeBSD 2 do not have this feature. ++ freebsd2*) ++ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' ++ _LT_TAGVAR(hardcode_direct, $1)=yes ++ _LT_TAGVAR(hardcode_minus_L, $1)=yes ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ ;; + +-# How to pass a linker flag through the compiler. +-wl=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) ++ # FreeBSD 3 and greater uses gcc -shared to do shared libraries. ++ freebsd* | dragonfly*) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' ++ _LT_TAGVAR(hardcode_direct, $1)=yes ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ ;; + +-# Object file suffix (normally "o"). +-objext="$ac_objext" ++ hpux9*) ++ if test "$GCC" = yes; then ++ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ++ else ++ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ++ fi ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' ++ _LT_TAGVAR(hardcode_libdir_separator, $1)=: ++ _LT_TAGVAR(hardcode_direct, $1)=yes + +-# Old archive suffix (normally "a"). +-libext="$libext" ++ # hardcode_minus_L: Not really in the search PATH, ++ # but as the default location of the library. ++ _LT_TAGVAR(hardcode_minus_L, $1)=yes ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ++ ;; + +-# Shared library suffix (normally ".so"). +-shrext_cmds='$shrext_cmds' ++ hpux10*) ++ if test "$GCC" = yes -a "$with_gnu_ld" = no; then ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ++ else ++ _LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' ++ fi ++ if test "$with_gnu_ld" = no; then ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' ++ _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir' ++ _LT_TAGVAR(hardcode_libdir_separator, $1)=: ++ _LT_TAGVAR(hardcode_direct, $1)=yes ++ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ++ # hardcode_minus_L: Not really in the search PATH, ++ # but as the default location of the library. ++ _LT_TAGVAR(hardcode_minus_L, $1)=yes ++ fi ++ ;; + +-# Executable file suffix (normally ""). +-exeext="$exeext" +- +-# Additional compiler flags for building library objects. +-pic_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) +-pic_mode=$pic_mode +- +-# What is the maximum length of a command? +-max_cmd_len=$lt_cv_sys_max_cmd_len +- +-# Does compiler simultaneously support -c and -o options? +-compiler_c_o=$lt_[]_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) ++ hpux11*) ++ if test "$GCC" = yes -a "$with_gnu_ld" = no; then ++ case $host_cpu in ++ hppa*64*) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ ia64*) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ *) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ esac ++ else ++ case $host_cpu in ++ hppa*64*) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ ia64*) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ *) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ esac ++ fi ++ if test "$with_gnu_ld" = no; then ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' ++ _LT_TAGVAR(hardcode_libdir_separator, $1)=: + +-# Must we lock files when doing compilation? +-need_locks=$lt_need_locks ++ case $host_cpu in ++ hppa*64*|ia64*) ++ _LT_TAGVAR(hardcode_direct, $1)=no ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ ;; ++ *) ++ _LT_TAGVAR(hardcode_direct, $1)=yes ++ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + +-# Do we need the lib prefix for modules? +-need_lib_prefix=$need_lib_prefix ++ # hardcode_minus_L: Not really in the search PATH, ++ # but as the default location of the library. ++ _LT_TAGVAR(hardcode_minus_L, $1)=yes ++ ;; ++ esac ++ fi ++ ;; + +-# Do we need a version for libraries? +-need_version=$need_version ++ irix5* | irix6* | nonstopux*) ++ if test "$GCC" = yes; then ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ # Try to use the -exported_symbol ld option, if it does not ++ # work, assume that -exports_file does not work either and ++ # implicitly export all symbols. ++ save_LDFLAGS="$LDFLAGS" ++ LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" ++ AC_LINK_IFELSE(int foo(void) {}, ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' ++ ) ++ LDFLAGS="$save_LDFLAGS" ++ else ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' ++ fi ++ _LT_TAGVAR(archive_cmds_need_lc, $1)='no' ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' ++ _LT_TAGVAR(hardcode_libdir_separator, $1)=: ++ _LT_TAGVAR(inherit_rpath, $1)=yes ++ _LT_TAGVAR(link_all_deplibs, $1)=yes ++ ;; + +-# Whether dlopen is supported. +-dlopen_support=$enable_dlopen ++ netbsd* | netbsdelf*-gnu) ++ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then ++ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out ++ else ++ _LT_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF ++ fi ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' ++ _LT_TAGVAR(hardcode_direct, $1)=yes ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ ;; + +-# Whether dlopen of programs is supported. +-dlopen_self=$enable_dlopen_self ++ newsos6) ++ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ _LT_TAGVAR(hardcode_direct, $1)=yes ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' ++ _LT_TAGVAR(hardcode_libdir_separator, $1)=: ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ ;; + +-# Whether dlopen of statically linked programs is supported. +-dlopen_self_static=$enable_dlopen_self_static ++ *nto* | *qnx*) ++ ;; + +-# Compiler flag to prevent dynamic linking. +-link_static_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_static, $1) ++ openbsd*) ++ if test -f /usr/libexec/ld.so; then ++ _LT_TAGVAR(hardcode_direct, $1)=yes ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes ++ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ++ else ++ case $host_os in ++ openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*) ++ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' ++ ;; ++ *) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' ++ ;; ++ esac ++ fi ++ else ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ fi ++ ;; + +-# Compiler flag to turn off builtin functions. +-no_builtin_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) ++ os2*) ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' ++ _LT_TAGVAR(hardcode_minus_L, $1)=yes ++ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported ++ _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$ECHO DATA >> $output_objdir/$libname.def~$ECHO " SINGLE NONSHARED" >> $output_objdir/$libname.def~$ECHO EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' ++ _LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' ++ ;; + +-# Compiler flag to allow reflexive dlopens. +-export_dynamic_flag_spec=$lt_[]_LT_AC_TAGVAR(export_dynamic_flag_spec, $1) ++ osf3*) ++ if test "$GCC" = yes; then ++ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ else ++ _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' ++ fi ++ _LT_TAGVAR(archive_cmds_need_lc, $1)='no' ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' ++ _LT_TAGVAR(hardcode_libdir_separator, $1)=: ++ ;; + +-# Compiler flag to generate shared objects directly from archives. +-whole_archive_flag_spec=$lt_[]_LT_AC_TAGVAR(whole_archive_flag_spec, $1) ++ osf4* | osf5*) # as osf3* with the addition of -msym flag ++ if test "$GCC" = yes; then ++ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' ++ else ++ _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ ++ $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp' + +-# Compiler flag to generate thread-safe objects. +-thread_safe_flag_spec=$lt_[]_LT_AC_TAGVAR(thread_safe_flag_spec, $1) ++ # Both c and cxx compiler support -rpath directly ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' ++ fi ++ _LT_TAGVAR(archive_cmds_need_lc, $1)='no' ++ _LT_TAGVAR(hardcode_libdir_separator, $1)=: ++ ;; + +-# Library versioning type. +-version_type=$version_type ++ solaris*) ++ _LT_TAGVAR(no_undefined_flag, $1)=' -z defs' ++ if test "$GCC" = yes; then ++ wlarc='${wl}' ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ ++ $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' ++ else ++ case `$CC -V 2>&1` in ++ *"Compilers 5.0"*) ++ wlarc='' ++ _LT_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ ++ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' ++ ;; ++ *) ++ wlarc='${wl}' ++ _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ ++ $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' ++ ;; ++ esac ++ fi ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ case $host_os in ++ solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; ++ *) ++ # The compiler driver will combine and reorder linker options, ++ # but understands `-z linker_flag'. GCC discards it without `$wl', ++ # but is careful enough not to reorder. ++ # Supported since Solaris 2.6 (maybe 2.5.1?) ++ if test "$GCC" = yes; then ++ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' ++ else ++ _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ++ fi ++ ;; ++ esac ++ _LT_TAGVAR(link_all_deplibs, $1)=yes ++ ;; + +-# Format of library name prefix. +-libname_spec=$lt_libname_spec ++ sunos4*) ++ if test "x$host_vendor" = xsequent; then ++ # Use $CC to link under sequent, because it throws in some extra .o ++ # files that make .init and .fini sections work. ++ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' ++ else ++ _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' ++ fi ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' ++ _LT_TAGVAR(hardcode_direct, $1)=yes ++ _LT_TAGVAR(hardcode_minus_L, $1)=yes ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ ;; + +-# List of archive names. First name is the real one, the rest are links. +-# The last name is the one that the linker finds with -lNAME. +-library_names_spec=$lt_library_names_spec ++ sysv4) ++ case $host_vendor in ++ sni) ++ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ _LT_TAGVAR(hardcode_direct, $1)=yes # is this really true??? ++ ;; ++ siemens) ++ ## LD is ld it makes a PLAMLIB ++ ## CC just makes a GrossModule. ++ _LT_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags' ++ _LT_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs' ++ _LT_TAGVAR(hardcode_direct, $1)=no ++ ;; ++ motorola) ++ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ _LT_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie ++ ;; ++ esac ++ runpath_var='LD_RUN_PATH' ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ ;; + +-# The coded name of the library, if different from the real name. +-soname_spec=$lt_soname_spec ++ sysv4.3*) ++ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport' ++ ;; + +-# Commands used to build and install an old-style archive. +-RANLIB=$lt_RANLIB +-old_archive_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_cmds, $1) +-old_postinstall_cmds=$lt_old_postinstall_cmds +-old_postuninstall_cmds=$lt_old_postuninstall_cmds ++ sysv4*MP*) ++ if test -d /usr/nec; then ++ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ runpath_var=LD_RUN_PATH ++ hardcode_runpath_var=yes ++ _LT_TAGVAR(ld_shlibs, $1)=yes ++ fi ++ ;; + +-# Create an old-style archive from a shared archive. +-old_archive_from_new_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_new_cmds, $1) ++ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) ++ _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' ++ _LT_TAGVAR(archive_cmds_need_lc, $1)=no ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ runpath_var='LD_RUN_PATH' + +-# Create a temporary old-style archive to link instead of a shared archive. +-old_archive_from_expsyms_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) ++ if test "$GCC" = yes; then ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ else ++ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ fi ++ ;; + +-# Commands used to build and install a shared archive. +-archive_cmds=$lt_[]_LT_AC_TAGVAR(archive_cmds, $1) +-archive_expsym_cmds=$lt_[]_LT_AC_TAGVAR(archive_expsym_cmds, $1) +-postinstall_cmds=$lt_postinstall_cmds +-postuninstall_cmds=$lt_postuninstall_cmds ++ sysv5* | sco3.2v5* | sco5v6*) ++ # Note: We can NOT use -z defs as we might desire, because we do not ++ # link with -lc, and that would cause any symbols used from libc to ++ # always be unresolved, which means just about no library would ++ # ever link correctly. If we're not using GNU ld we use -z text ++ # though, which does catch some bad symbols but isn't as heavy-handed ++ # as -z defs. ++ _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' ++ _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' ++ _LT_TAGVAR(archive_cmds_need_lc, $1)=no ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir' ++ _LT_TAGVAR(hardcode_libdir_separator, $1)=':' ++ _LT_TAGVAR(link_all_deplibs, $1)=yes ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' ++ runpath_var='LD_RUN_PATH' + +-# Commands used to build a loadable module (assumed same as above if empty) +-module_cmds=$lt_[]_LT_AC_TAGVAR(module_cmds, $1) +-module_expsym_cmds=$lt_[]_LT_AC_TAGVAR(module_expsym_cmds, $1) ++ if test "$GCC" = yes; then ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ else ++ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ fi ++ ;; + +-# Commands to strip libraries. +-old_striplib=$lt_old_striplib +-striplib=$lt_striplib ++ uts4*) ++ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ ;; + +-# Dependencies to place before the objects being linked to create a +-# shared library. +-predep_objects=$lt_[]_LT_AC_TAGVAR(predep_objects, $1) ++ *) ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ esac + +-# Dependencies to place after the objects being linked to create a +-# shared library. +-postdep_objects=$lt_[]_LT_AC_TAGVAR(postdep_objects, $1) ++ if test x$host_vendor = xsni; then ++ case $host in ++ sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Blargedynsym' ++ ;; ++ esac ++ fi ++ fi ++]) ++AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)]) ++test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no + +-# Dependencies to place before the objects being linked to create a +-# shared library. +-predeps=$lt_[]_LT_AC_TAGVAR(predeps, $1) ++_LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld + +-# Dependencies to place after the objects being linked to create a +-# shared library. +-postdeps=$lt_[]_LT_AC_TAGVAR(postdeps, $1) ++_LT_DECL([], [libext], [0], [Old archive suffix (normally "a")])dnl ++_LT_DECL([], [shrext_cmds], [1], [Shared library suffix (normally ".so")])dnl ++_LT_DECL([], [extract_expsyms_cmds], [2], ++ [The commands to extract the exported symbol list from a shared archive]) + +-# The directories searched by this compiler when creating a shared +-# library +-compiler_lib_search_dirs=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_dirs, $1) ++# ++# Do we need to explicitly link libc? ++# ++case "x$_LT_TAGVAR(archive_cmds_need_lc, $1)" in ++x|xyes) ++ # Assume -lc should be added ++ _LT_TAGVAR(archive_cmds_need_lc, $1)=yes + +-# The library search path used internally by the compiler when linking +-# a shared library. +-compiler_lib_search_path=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_path, $1) ++ if test "$enable_shared" = yes && test "$GCC" = yes; then ++ case $_LT_TAGVAR(archive_cmds, $1) in ++ *'~'*) ++ # FIXME: we may have to deal with multi-command sequences. ++ ;; ++ '$CC '*) ++ # Test whether the compiler implicitly links with -lc since on some ++ # systems, -lgcc has to come before -lc. If gcc already passes -lc ++ # to ld, don't add -lc before -lgcc. ++ AC_MSG_CHECKING([whether -lc should be explicitly linked in]) ++ $RM conftest* ++ echo "$lt_simple_compile_test_code" > conftest.$ac_ext + +-# Method to check whether dependent libraries are shared objects. +-deplibs_check_method=$lt_deplibs_check_method ++ if AC_TRY_EVAL(ac_compile) 2>conftest.err; then ++ soname=conftest ++ lib=conftest ++ libobjs=conftest.$ac_objext ++ deplibs= ++ wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) ++ pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1) ++ compiler_flags=-v ++ linker_flags=-v ++ verstring= ++ output_objdir=. ++ libname=conftest ++ lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1) ++ _LT_TAGVAR(allow_undefined_flag, $1)= ++ if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) ++ then ++ _LT_TAGVAR(archive_cmds_need_lc, $1)=no ++ else ++ _LT_TAGVAR(archive_cmds_need_lc, $1)=yes ++ fi ++ _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag ++ else ++ cat conftest.err 1>&5 ++ fi ++ $RM conftest* ++ AC_MSG_RESULT([$_LT_TAGVAR(archive_cmds_need_lc, $1)]) ++ ;; ++ esac ++ fi ++ ;; ++esac + +-# Command to use when deplibs_check_method == file_magic. +-file_magic_cmd=$lt_file_magic_cmd ++_LT_TAGDECL([build_libtool_need_lc], [archive_cmds_need_lc], [0], ++ [Whether or not to add -lc for building shared libraries]) ++_LT_TAGDECL([allow_libtool_libs_with_static_runtimes], ++ [enable_shared_with_static_runtimes], [0], ++ [Whether or not to disallow shared libs when runtime libs are static]) ++_LT_TAGDECL([], [export_dynamic_flag_spec], [1], ++ [Compiler flag to allow reflexive dlopens]) ++_LT_TAGDECL([], [whole_archive_flag_spec], [1], ++ [Compiler flag to generate shared objects directly from archives]) ++_LT_TAGDECL([], [compiler_needs_object], [1], ++ [Whether the compiler copes with passing no objects directly]) ++_LT_TAGDECL([], [old_archive_from_new_cmds], [2], ++ [Create an old-style archive from a shared archive]) ++_LT_TAGDECL([], [old_archive_from_expsyms_cmds], [2], ++ [Create a temporary old-style archive to link instead of a shared archive]) ++_LT_TAGDECL([], [archive_cmds], [2], [Commands used to build a shared archive]) ++_LT_TAGDECL([], [archive_expsym_cmds], [2]) ++_LT_TAGDECL([], [module_cmds], [2], ++ [Commands used to build a loadable module if different from building ++ a shared archive.]) ++_LT_TAGDECL([], [module_expsym_cmds], [2]) ++_LT_TAGDECL([], [with_gnu_ld], [1], ++ [Whether we are building with GNU ld or not]) ++_LT_TAGDECL([], [allow_undefined_flag], [1], ++ [Flag that allows shared libraries with undefined symbols to be built]) ++_LT_TAGDECL([], [no_undefined_flag], [1], ++ [Flag that enforces no undefined symbols]) ++_LT_TAGDECL([], [hardcode_libdir_flag_spec], [1], ++ [Flag to hardcode $libdir into a binary during linking. ++ This must work even if $libdir does not exist]) ++_LT_TAGDECL([], [hardcode_libdir_flag_spec_ld], [1], ++ [[If ld is used when linking, flag to hardcode $libdir into a binary ++ during linking. This must work even if $libdir does not exist]]) ++_LT_TAGDECL([], [hardcode_libdir_separator], [1], ++ [Whether we need a single "-rpath" flag with a separated argument]) ++_LT_TAGDECL([], [hardcode_direct], [0], ++ [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes ++ DIR into the resulting binary]) ++_LT_TAGDECL([], [hardcode_direct_absolute], [0], ++ [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes ++ DIR into the resulting binary and the resulting library dependency is ++ "absolute", i.e impossible to change by setting ${shlibpath_var} if the ++ library is relocated]) ++_LT_TAGDECL([], [hardcode_minus_L], [0], ++ [Set to "yes" if using the -LDIR flag during linking hardcodes DIR ++ into the resulting binary]) ++_LT_TAGDECL([], [hardcode_shlibpath_var], [0], ++ [Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR ++ into the resulting binary]) ++_LT_TAGDECL([], [hardcode_automatic], [0], ++ [Set to "yes" if building a shared library automatically hardcodes DIR ++ into the library and all subsequent libraries and executables linked ++ against it]) ++_LT_TAGDECL([], [inherit_rpath], [0], ++ [Set to yes if linker adds runtime paths of dependent libraries ++ to runtime path list]) ++_LT_TAGDECL([], [link_all_deplibs], [0], ++ [Whether libtool must link a program against all its dependency libraries]) ++_LT_TAGDECL([], [fix_srcfile_path], [1], ++ [Fix the shell variable $srcfile for the compiler]) ++_LT_TAGDECL([], [always_export_symbols], [0], ++ [Set to "yes" if exported symbols are required]) ++_LT_TAGDECL([], [export_symbols_cmds], [2], ++ [The commands to list exported symbols]) ++_LT_TAGDECL([], [exclude_expsyms], [1], ++ [Symbols that should not be listed in the preloaded symbols]) ++_LT_TAGDECL([], [include_expsyms], [1], ++ [Symbols that must always be exported]) ++_LT_TAGDECL([], [prelink_cmds], [2], ++ [Commands necessary for linking programs (against libraries) with templates]) ++_LT_TAGDECL([], [file_list_spec], [1], ++ [Specify filename containing input files]) ++dnl FIXME: Not yet implemented ++dnl _LT_TAGDECL([], [thread_safe_flag_spec], [1], ++dnl [Compiler flag to generate thread safe objects]) ++])# _LT_LINKER_SHLIBS + +-# Flag that allows shared libraries with undefined symbols to be built. +-allow_undefined_flag=$lt_[]_LT_AC_TAGVAR(allow_undefined_flag, $1) + +-# Flag that forces no undefined symbols. +-no_undefined_flag=$lt_[]_LT_AC_TAGVAR(no_undefined_flag, $1) ++# _LT_LANG_C_CONFIG([TAG]) ++# ------------------------ ++# Ensure that the configuration variables for a C compiler are suitably ++# defined. These variables are subsequently used by _LT_CONFIG to write ++# the compiler configuration to `libtool'. ++m4_defun([_LT_LANG_C_CONFIG], ++[m4_require([_LT_DECL_EGREP])dnl ++lt_save_CC="$CC" ++AC_LANG_PUSH(C) + +-# Commands used to finish a libtool library installation in a directory. +-finish_cmds=$lt_finish_cmds ++# Source file extension for C test sources. ++ac_ext=c + +-# Same as above, but a single script fragment to be evaled but not shown. +-finish_eval=$lt_finish_eval ++# Object file extension for compiled C test sources. ++objext=o ++_LT_TAGVAR(objext, $1)=$objext + +-# Take the output of nm and produce a listing of raw symbols and C names. +-global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe ++# Code to be used in simple compile tests ++lt_simple_compile_test_code="int some_variable = 0;" + +-# Transform the output of nm in a proper C declaration +-global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl ++# Code to be used in simple link tests ++lt_simple_link_test_code='int main(){return(0);}' + +-# Transform the output of nm in a C name address pair +-global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address ++_LT_TAG_COMPILER ++# Save the default compiler, since it gets overwritten when the other ++# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP. ++compiler_DEFAULT=$CC + +-# This is the shared library runtime path variable. +-runpath_var=$runpath_var ++# save warnings/boilerplate of simple test code ++_LT_COMPILER_BOILERPLATE ++_LT_LINKER_BOILERPLATE + +-# This is the shared library path variable. +-shlibpath_var=$shlibpath_var ++if test -n "$compiler"; then ++ _LT_COMPILER_NO_RTTI($1) ++ _LT_COMPILER_PIC($1) ++ _LT_COMPILER_C_O($1) ++ _LT_COMPILER_FILE_LOCKS($1) ++ _LT_LINKER_SHLIBS($1) ++ _LT_SYS_DYNAMIC_LINKER($1) ++ _LT_LINKER_HARDCODE_LIBPATH($1) ++ LT_SYS_DLOPEN_SELF ++ _LT_CMD_STRIPLIB ++ ++ # Report which library types will actually be built ++ AC_MSG_CHECKING([if libtool supports shared libraries]) ++ AC_MSG_RESULT([$can_build_shared]) + +-# Is shlibpath searched before the hard-coded library search path? +-shlibpath_overrides_runpath=$shlibpath_overrides_runpath ++ AC_MSG_CHECKING([whether to build shared libraries]) ++ test "$can_build_shared" = "no" && enable_shared=no + +-# How to hardcode a shared library path into an executable. +-hardcode_action=$_LT_AC_TAGVAR(hardcode_action, $1) ++ # On AIX, shared libraries and static libraries use the same namespace, and ++ # are all built from PIC. ++ case $host_os in ++ aix3*) ++ test "$enable_shared" = yes && enable_static=no ++ if test -n "$RANLIB"; then ++ archive_cmds="$archive_cmds~\$RANLIB \$lib" ++ postinstall_cmds='$RANLIB $lib' ++ fi ++ ;; + +-# Whether we should hardcode library paths into libraries. +-hardcode_into_libs=$hardcode_into_libs ++ aix[[4-9]]*) ++ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then ++ test "$enable_shared" = yes && enable_static=no ++ fi ++ ;; ++ esac ++ AC_MSG_RESULT([$enable_shared]) + +-# Flag to hardcode \$libdir into a binary during linking. +-# This must work even if \$libdir does not exist. +-hardcode_libdir_flag_spec=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) ++ AC_MSG_CHECKING([whether to build static libraries]) ++ # Make sure either enable_shared or enable_static is yes. ++ test "$enable_shared" = yes || enable_static=yes ++ AC_MSG_RESULT([$enable_static]) + +-# If ld is used when linking, flag to hardcode \$libdir into +-# a binary during linking. This must work even if \$libdir does +-# not exist. +-hardcode_libdir_flag_spec_ld=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1) ++ _LT_CONFIG($1) ++fi ++AC_LANG_POP ++CC="$lt_save_CC" ++])# _LT_LANG_C_CONFIG + +-# Whether we need a single -rpath flag with a separated argument. +-hardcode_libdir_separator=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_separator, $1) + +-# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the +-# resulting binary. +-hardcode_direct=$_LT_AC_TAGVAR(hardcode_direct, $1) ++# _LT_PROG_CXX ++# ------------ ++# Since AC_PROG_CXX is broken, in that it returns g++ if there is no c++ ++# compiler, we have our own version here. ++m4_defun([_LT_PROG_CXX], ++[ ++pushdef([AC_MSG_ERROR], [_lt_caught_CXX_error=yes]) ++AC_PROG_CXX ++if test -n "$CXX" && ( test "X$CXX" != "Xno" && ++ ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || ++ (test "X$CXX" != "Xg++"))) ; then ++ AC_PROG_CXXCPP ++else ++ _lt_caught_CXX_error=yes ++fi ++popdef([AC_MSG_ERROR]) ++])# _LT_PROG_CXX + +-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the +-# resulting binary. +-hardcode_minus_L=$_LT_AC_TAGVAR(hardcode_minus_L, $1) ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([_LT_PROG_CXX], []) + +-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into +-# the resulting binary. +-hardcode_shlibpath_var=$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1) + +-# Set to yes if building a shared library automatically hardcodes DIR into the library +-# and all subsequent libraries and executables linked against it. +-hardcode_automatic=$_LT_AC_TAGVAR(hardcode_automatic, $1) ++# _LT_LANG_CXX_CONFIG([TAG]) ++# -------------------------- ++# Ensure that the configuration variables for a C++ compiler are suitably ++# defined. These variables are subsequently used by _LT_CONFIG to write ++# the compiler configuration to `libtool'. ++m4_defun([_LT_LANG_CXX_CONFIG], ++[AC_REQUIRE([_LT_PROG_CXX])dnl ++m4_require([_LT_FILEUTILS_DEFAULTS])dnl ++m4_require([_LT_DECL_EGREP])dnl ++ ++AC_LANG_PUSH(C++) ++_LT_TAGVAR(archive_cmds_need_lc, $1)=no ++_LT_TAGVAR(allow_undefined_flag, $1)= ++_LT_TAGVAR(always_export_symbols, $1)=no ++_LT_TAGVAR(archive_expsym_cmds, $1)= ++_LT_TAGVAR(compiler_needs_object, $1)=no ++_LT_TAGVAR(export_dynamic_flag_spec, $1)= ++_LT_TAGVAR(hardcode_direct, $1)=no ++_LT_TAGVAR(hardcode_direct_absolute, $1)=no ++_LT_TAGVAR(hardcode_libdir_flag_spec, $1)= ++_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= ++_LT_TAGVAR(hardcode_libdir_separator, $1)= ++_LT_TAGVAR(hardcode_minus_L, $1)=no ++_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported ++_LT_TAGVAR(hardcode_automatic, $1)=no ++_LT_TAGVAR(inherit_rpath, $1)=no ++_LT_TAGVAR(module_cmds, $1)= ++_LT_TAGVAR(module_expsym_cmds, $1)= ++_LT_TAGVAR(link_all_deplibs, $1)=unknown ++_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds ++_LT_TAGVAR(no_undefined_flag, $1)= ++_LT_TAGVAR(whole_archive_flag_spec, $1)= ++_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no + +-# Variables whose values should be saved in libtool wrapper scripts and +-# restored at relink time. +-variables_saved_for_relink="$variables_saved_for_relink" ++# Source file extension for C++ test sources. ++ac_ext=cpp + +-# Whether libtool must link a program against all its dependency libraries. +-link_all_deplibs=$_LT_AC_TAGVAR(link_all_deplibs, $1) ++# Object file extension for compiled C++ test sources. ++objext=o ++_LT_TAGVAR(objext, $1)=$objext + +-# Compile-time system search path for libraries +-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec ++# No sense in running all these tests if we already determined that ++# the CXX compiler isn't working. Some variables (like enable_shared) ++# are currently assumed to apply to all compilers on this platform, ++# and will be corrupted by setting them based on a non-working compiler. ++if test "$_lt_caught_CXX_error" != yes; then ++ # Code to be used in simple compile tests ++ lt_simple_compile_test_code="int some_variable = 0;" ++ ++ # Code to be used in simple link tests ++ lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }' ++ ++ # ltmain only uses $CC for tagged configurations so make sure $CC is set. ++ _LT_TAG_COMPILER ++ ++ # save warnings/boilerplate of simple test code ++ _LT_COMPILER_BOILERPLATE ++ _LT_LINKER_BOILERPLATE ++ ++ # Allow CC to be a program name with arguments. ++ lt_save_CC=$CC ++ lt_save_LD=$LD ++ lt_save_GCC=$GCC ++ GCC=$GXX ++ lt_save_with_gnu_ld=$with_gnu_ld ++ lt_save_path_LD=$lt_cv_path_LD ++ if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then ++ lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx ++ else ++ $as_unset lt_cv_prog_gnu_ld ++ fi ++ if test -n "${lt_cv_path_LDCXX+set}"; then ++ lt_cv_path_LD=$lt_cv_path_LDCXX ++ else ++ $as_unset lt_cv_path_LD ++ fi ++ test -z "${LDCXX+set}" || LD=$LDCXX ++ CC=${CXX-"c++"} ++ compiler=$CC ++ _LT_TAGVAR(compiler, $1)=$CC ++ _LT_CC_BASENAME([$compiler]) + +-# Run-time system search path for libraries +-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec ++ if test -n "$compiler"; then ++ # We don't want -fno-exception when compiling C++ code, so set the ++ # no_builtin_flag separately ++ if test "$GXX" = yes; then ++ _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' ++ else ++ _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= ++ fi + +-# Fix the shell variable \$srcfile for the compiler. +-fix_srcfile_path=$lt_fix_srcfile_path ++ if test "$GXX" = yes; then ++ # Set up default GNU C++ configuration + +-# Set to yes if exported symbols are required. +-always_export_symbols=$_LT_AC_TAGVAR(always_export_symbols, $1) ++ LT_PATH_LD + +-# The commands to list exported symbols. +-export_symbols_cmds=$lt_[]_LT_AC_TAGVAR(export_symbols_cmds, $1) ++ # Check if GNU C++ uses GNU ld as the underlying linker, since the ++ # archiving commands below assume that GNU ld is being used. ++ if test "$with_gnu_ld" = yes; then ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' ++ ++ # If archive_cmds runs LD, not CC, wlarc should be empty ++ # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to ++ # investigate it a little bit more. (MM) ++ wlarc='${wl}' ++ ++ # ancient GNU ld didn't support --whole-archive et. al. ++ if eval "`$CC -print-prog-name=ld` --help 2>&1" | ++ $GREP 'no-whole-archive' > /dev/null; then ++ _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' ++ else ++ _LT_TAGVAR(whole_archive_flag_spec, $1)= ++ fi ++ else ++ with_gnu_ld=no ++ wlarc= + +-# The commands to extract the exported symbol list from a shared archive. +-extract_expsyms_cmds=$lt_extract_expsyms_cmds ++ # A generic and very simple default shared library creation ++ # command for GNU C++ for the case where it uses the native ++ # linker, instead of GNU ld. If possible, this setting should ++ # overridden to take advantage of the native linker features on ++ # the platform it is being used on. ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' ++ fi + +-# Symbols that should not be listed in the preloaded symbols. +-exclude_expsyms=$lt_[]_LT_AC_TAGVAR(exclude_expsyms, $1) ++ # Commands to make compiler produce verbose output that lists ++ # what "hidden" libraries, object files and flags are used when ++ # linking a shared library. ++ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"' + +-# Symbols that must always be exported. +-include_expsyms=$lt_[]_LT_AC_TAGVAR(include_expsyms, $1) ++ else ++ GXX=no ++ with_gnu_ld=no ++ wlarc= ++ fi + +-ifelse([$1],[], +-[# ### END LIBTOOL CONFIG], +-[# ### END LIBTOOL TAG CONFIG: $tagname]) ++ # PORTME: fill in a description of your system's C++ link characteristics ++ AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) ++ _LT_TAGVAR(ld_shlibs, $1)=yes ++ case $host_os in ++ aix3*) ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ aix[[4-9]]*) ++ if test "$host_cpu" = ia64; then ++ # On IA64, the linker does run time linking by default, so we don't ++ # have to do anything special. ++ aix_use_runtimelinking=no ++ exp_sym_flag='-Bexport' ++ no_entry_flag="" ++ else ++ aix_use_runtimelinking=no + +-__EOF__ ++ # Test if we are trying to use run time linking or normal ++ # AIX style linking. If -brtl is somewhere in LDFLAGS, we ++ # need to do runtime linking. ++ case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) ++ for ld_flag in $LDFLAGS; do ++ case $ld_flag in ++ *-brtl*) ++ aix_use_runtimelinking=yes ++ break ++ ;; ++ esac ++ done ++ ;; ++ esac + +-ifelse([$1],[], [ +- case $host_os in +- aix3*) +- cat <<\EOF >> "$cfgfile" ++ exp_sym_flag='-bexport' ++ no_entry_flag='-bnoentry' ++ fi + +-# AIX sometimes has problems with the GCC collect2 program. For some +-# reason, if we set the COLLECT_NAMES environment variable, the problems +-# vanish in a puff of smoke. +-if test "X${COLLECT_NAMES+set}" != Xset; then +- COLLECT_NAMES= +- export COLLECT_NAMES +-fi +-EOF +- ;; +- esac +- +- # We use sed instead of cat because bash on DJGPP gets confused if +- # if finds mixed CR/LF and LF-only lines. Since sed operates in +- # text mode, it properly converts lines to CR/LF. This bash problem +- # is reportedly fixed, but why not run on old versions too? +- sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1) +- +- mv -f "$cfgfile" "$ofile" || \ +- (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") +- chmod +x "$ofile" +-]) +-else +- # If there is no Makefile yet, we rely on a make rule to execute +- # `config.status --recheck' to rerun these tests and create the +- # libtool script then. +- ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` +- if test -f "$ltmain_in"; then +- test -f Makefile && make "$ltmain" +- fi +-fi +-])# AC_LIBTOOL_CONFIG +- +- +-# AC_LIBTOOL_PROG_COMPILER_NO_RTTI([TAGNAME]) +-# ------------------------------------------- +-AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], +-[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl ++ # When large executables or shared objects are built, AIX ld can ++ # have problems creating the table of contents. If linking a library ++ # or program results in "error TOC overflow" add -mminimal-toc to ++ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not ++ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. ++ ++ _LT_TAGVAR(archive_cmds, $1)='' ++ _LT_TAGVAR(hardcode_direct, $1)=yes ++ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes ++ _LT_TAGVAR(hardcode_libdir_separator, $1)=':' ++ _LT_TAGVAR(link_all_deplibs, $1)=yes ++ _LT_TAGVAR(file_list_spec, $1)='${wl}-f,' ++ ++ if test "$GXX" = yes; then ++ case $host_os in aix4.[[012]]|aix4.[[012]].*) ++ # We only want to do this on AIX 4.2 and lower, the check ++ # below for broken collect2 doesn't work under 4.3+ ++ collect2name=`${CC} -print-prog-name=collect2` ++ if test -f "$collect2name" && ++ strings "$collect2name" | $GREP resolve_lib_name >/dev/null ++ then ++ # We have reworked collect2 ++ : ++ else ++ # We have old collect2 ++ _LT_TAGVAR(hardcode_direct, $1)=unsupported ++ # It fails to find uninstalled libraries when the uninstalled ++ # path is not listed in the libpath. Setting hardcode_minus_L ++ # to unsupported forces relinking ++ _LT_TAGVAR(hardcode_minus_L, $1)=yes ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' ++ _LT_TAGVAR(hardcode_libdir_separator, $1)= ++ fi ++ esac ++ shared_flag='-shared' ++ if test "$aix_use_runtimelinking" = yes; then ++ shared_flag="$shared_flag "'${wl}-G' ++ fi ++ else ++ # not using gcc ++ if test "$host_cpu" = ia64; then ++ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release ++ # chokes on -Wl,-G. The following line is correct: ++ shared_flag='-G' ++ else ++ if test "$aix_use_runtimelinking" = yes; then ++ shared_flag='${wl}-G' ++ else ++ shared_flag='${wl}-bM:SRE' ++ fi ++ fi ++ fi + +-_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= ++ # It seems that -bexpall does not export symbols beginning with ++ # underscore (_), so it is better to generate a list of symbols to ++ # export. ++ _LT_TAGVAR(always_export_symbols, $1)=yes ++ if test "$aix_use_runtimelinking" = yes; then ++ # Warning - without using the other runtime loading flags (-brtl), ++ # -berok will link without error, but may produce a broken library. ++ _LT_TAGVAR(allow_undefined_flag, $1)='-berok' ++ # Determine the default libpath from the value encoded in an empty ++ # executable. ++ _LT_SYS_MODULE_PATH_AIX ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + +-if test "$GCC" = yes; then +- _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" ++ else ++ if test "$host_cpu" = ia64; then ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' ++ _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs" ++ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" ++ else ++ # Determine the default libpath from the value encoded in an ++ # empty executable. ++ _LT_SYS_MODULE_PATH_AIX ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" ++ # Warning - without using the other run time loading flags, ++ # -berok will link without error, but may produce a broken library. ++ _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' ++ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' ++ # Exported symbols can be pulled into shared objects from archives ++ _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience' ++ _LT_TAGVAR(archive_cmds_need_lc, $1)=yes ++ # This is similar to how AIX traditionally builds its shared ++ # libraries. ++ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' ++ fi ++ fi ++ ;; + +- AC_LIBTOOL_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions], +- lt_cv_prog_compiler_rtti_exceptions, +- [-fno-rtti -fno-exceptions], [], +- [_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"]) +-fi +-])# AC_LIBTOOL_PROG_COMPILER_NO_RTTI ++ beos*) ++ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then ++ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported ++ # Joseph Beckenbach says some releases of gcc ++ # support --undefined. This deserves some investigation. FIXME ++ _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ else ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ fi ++ ;; + ++ chorus*) ++ case $cc_basename in ++ *) ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ esac ++ ;; + +-# AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE +-# --------------------------------- +-AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], +-[AC_REQUIRE([AC_CANONICAL_HOST]) +-AC_REQUIRE([LT_AC_PROG_SED]) +-AC_REQUIRE([AC_PROG_NM]) +-AC_REQUIRE([AC_OBJEXT]) +-# Check for command to grab the raw symbol name followed by C symbol from nm. +-AC_MSG_CHECKING([command to parse $NM output from $compiler object]) +-AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe], +-[ +-# These are sane defaults that work on at least a few old systems. +-# [They come from Ultrix. What could be older than Ultrix?!! ;)] ++ cygwin* | mingw* | pw32*) ++ # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, ++ # as there is no search path for DLLs. ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' ++ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported ++ _LT_TAGVAR(always_export_symbols, $1)=no ++ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes ++ ++ if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' ++ # If the export-symbols file already is a .def file (1st line ++ # is EXPORTS), use it as is; otherwise, prepend... ++ _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then ++ cp $export_symbols $output_objdir/$soname.def; ++ else ++ echo EXPORTS > $output_objdir/$soname.def; ++ cat $export_symbols >> $output_objdir/$soname.def; ++ fi~ ++ $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' ++ else ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ fi ++ ;; ++ darwin* | rhapsody*) ++ _LT_DARWIN_LINKER_FEATURES($1) ++ ;; + +-# Character class describing NM global symbol codes. +-symcode='[[BCDEGRST]]' ++ dgux*) ++ case $cc_basename in ++ ec++*) ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ ghcx*) ++ # Green Hills C++ Compiler ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ *) ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ esac ++ ;; + +-# Regexp to match symbols that can be accessed directly from C. +-sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)' ++ freebsd[[12]]*) ++ # C++ shared libraries reported to be fairly broken before ++ # switch to ELF ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; + +-# Transform an extracted symbol line into a proper C declaration +-lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'" ++ freebsd-elf*) ++ _LT_TAGVAR(archive_cmds_need_lc, $1)=no ++ ;; + +-# Transform an extracted symbol line into symbol name and symbol address +-lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" ++ freebsd* | dragonfly*) ++ # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF ++ # conventions ++ _LT_TAGVAR(ld_shlibs, $1)=yes ++ ;; + +-# Define system-specific variables. +-case $host_os in +-aix*) +- symcode='[[BCDT]]' +- ;; +-cygwin* | mingw* | pw32*) +- symcode='[[ABCDGISTW]]' +- ;; +-hpux*) # Its linker distinguishes data from code symbols +- if test "$host_cpu" = ia64; then +- symcode='[[ABCDEGRST]]' +- fi +- lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" +- lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" +- ;; +-linux* | k*bsd*-gnu) +- if test "$host_cpu" = ia64; then +- symcode='[[ABCDGIRSTW]]' +- lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" +- lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" +- fi +- ;; +-irix* | nonstopux*) +- symcode='[[BCDEGRST]]' +- ;; +-osf*) +- symcode='[[BCDEGQRST]]' +- ;; +-solaris*) +- symcode='[[BDRT]]' +- ;; +-sco3.2v5*) +- symcode='[[DT]]' +- ;; +-sysv4.2uw2*) +- symcode='[[DT]]' +- ;; +-sysv5* | sco5v6* | unixware* | OpenUNIX*) +- symcode='[[ABDT]]' +- ;; +-sysv4) +- symcode='[[DFNSTU]]' +- ;; +-esac ++ gnu*) ++ ;; + +-# Handle CRLF in mingw tool chain +-opt_cr= +-case $build_os in +-mingw*) +- opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp +- ;; +-esac ++ hpux9*) ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' ++ _LT_TAGVAR(hardcode_libdir_separator, $1)=: ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ++ _LT_TAGVAR(hardcode_direct, $1)=yes ++ _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, ++ # but as the default ++ # location of the library. ++ ++ case $cc_basename in ++ CC*) ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ aCC*) ++ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ++ # Commands to make compiler produce verbose output that lists ++ # what "hidden" libraries, object files and flags are used when ++ # linking a shared library. ++ # ++ # There doesn't appear to be a way to prevent this compiler from ++ # explicitly linking system object files so we need to strip them ++ # from the output so that they don't get included in the library ++ # dependencies. ++ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' ++ ;; ++ *) ++ if test "$GXX" = yes; then ++ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ++ else ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ fi ++ ;; ++ esac ++ ;; + +-# If we're using GNU nm, then use its standard symbol codes. +-case `$NM -V 2>&1` in +-*GNU* | *'with BFD'*) +- symcode='[[ABCDGIRSTW]]' ;; +-esac ++ hpux10*|hpux11*) ++ if test $with_gnu_ld = no; then ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' ++ _LT_TAGVAR(hardcode_libdir_separator, $1)=: ++ ++ case $host_cpu in ++ hppa*64*|ia64*) ++ ;; ++ *) ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ++ ;; ++ esac ++ fi ++ case $host_cpu in ++ hppa*64*|ia64*) ++ _LT_TAGVAR(hardcode_direct, $1)=no ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ ;; ++ *) ++ _LT_TAGVAR(hardcode_direct, $1)=yes ++ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes ++ _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, ++ # but as the default ++ # location of the library. ++ ;; ++ esac ++ ++ case $cc_basename in ++ CC*) ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ aCC*) ++ case $host_cpu in ++ hppa*64*) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ++ ;; ++ ia64*) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ++ ;; ++ *) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ++ ;; ++ esac ++ # Commands to make compiler produce verbose output that lists ++ # what "hidden" libraries, object files and flags are used when ++ # linking a shared library. ++ # ++ # There doesn't appear to be a way to prevent this compiler from ++ # explicitly linking system object files so we need to strip them ++ # from the output so that they don't get included in the library ++ # dependencies. ++ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' ++ ;; ++ *) ++ if test "$GXX" = yes; then ++ if test $with_gnu_ld = no; then ++ case $host_cpu in ++ hppa*64*) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ++ ;; ++ ia64*) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ++ ;; ++ *) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ++ ;; ++ esac ++ fi ++ else ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ fi ++ ;; ++ esac ++ ;; + +-# Try without a prefix undercore, then with it. +-for ac_symprfx in "" "_"; do ++ interix[[3-9]]*) ++ _LT_TAGVAR(hardcode_direct, $1)=no ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ++ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. ++ # Instead, shared libraries are loaded at an image base (0x10000000 by ++ # default) and relocated if they conflict, which is a slow very memory ++ # consuming and fragmenting process. To avoid this, we pick a random, ++ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link ++ # time. Moving up from 0x10000000 also allows more sbrk(2) space. ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ++ ;; ++ irix5* | irix6*) ++ case $cc_basename in ++ CC*) ++ # SGI C++ ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' ++ ++ # Archives containing C++ object files must be created using ++ # "CC -ar", where "CC" is the IRIX C++ compiler. This is ++ # necessary to make sure instantiated templates are included ++ # in the archive. ++ _LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs' ++ ;; ++ *) ++ if test "$GXX" = yes; then ++ if test "$with_gnu_ld" = no; then ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ else ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` -o $lib' ++ fi ++ fi ++ _LT_TAGVAR(link_all_deplibs, $1)=yes ++ ;; ++ esac ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' ++ _LT_TAGVAR(hardcode_libdir_separator, $1)=: ++ _LT_TAGVAR(inherit_rpath, $1)=yes ++ ;; + +- # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. +- symxfrm="\\1 $ac_symprfx\\2 \\2" ++ linux* | k*bsd*-gnu) ++ case $cc_basename in ++ KCC*) ++ # Kuck and Associates, Inc. (KAI) C++ Compiler ++ ++ # KCC will only create a shared library if the output file ++ # ends with ".so" (or ".sl" for HP-UX), so rename the library ++ # to its proper name (with version) after linking. ++ _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' ++ # Commands to make compiler produce verbose output that lists ++ # what "hidden" libraries, object files and flags are used when ++ # linking a shared library. ++ # ++ # There doesn't appear to be a way to prevent this compiler from ++ # explicitly linking system object files so we need to strip them ++ # from the output so that they don't get included in the library ++ # dependencies. ++ output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' ++ ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' ++ ++ # Archives containing C++ object files must be created using ++ # "CC -Bstatic", where "CC" is the KAI C++ compiler. ++ _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ++ ;; ++ icpc* | ecpc* ) ++ # Intel C++ ++ with_gnu_ld=yes ++ # version 8.0 and above of icpc choke on multiply defined symbols ++ # if we add $predep_objects and $postdep_objects, however 7.1 and ++ # earlier do not add the objects themselves. ++ case `$CC -V 2>&1` in ++ *"Version 7."*) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ ;; ++ *) # Version 8.0 or newer ++ tmp_idyn= ++ case $host_cpu in ++ ia64*) tmp_idyn=' -i_dynamic';; ++ esac ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ ;; ++ esac ++ _LT_TAGVAR(archive_cmds_need_lc, $1)=no ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' ++ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' ++ ;; ++ pgCC* | pgcpp*) ++ # Portland Group C++ compiler ++ case `$CC -V` in ++ *pgCC\ [[1-5]]* | *pgcpp\ [[1-5]]*) ++ _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~ ++ rm -rf $tpldir~ ++ $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~ ++ compile_command="$compile_command `find $tpldir -name \*.o | $NL2SP`"' ++ _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~ ++ rm -rf $tpldir~ ++ $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~ ++ $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | $NL2SP`~ ++ $RANLIB $oldlib' ++ _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~ ++ rm -rf $tpldir~ ++ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ ++ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~ ++ rm -rf $tpldir~ ++ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ ++ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' ++ ;; ++ *) # Version 6 will use weak symbols ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' ++ ;; ++ esac + +- # Write the raw and C identifiers. +- lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' ++ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' ++ ;; ++ cxx*) ++ # Compaq C++ ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' + +- # Check to see that the pipe works correctly. +- pipe_works=no ++ runpath_var=LD_RUN_PATH ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' ++ _LT_TAGVAR(hardcode_libdir_separator, $1)=: + +- rm -f conftest* +- cat > conftest.$ac_ext <&1 | sed 5q` in ++ *Sun\ C*) ++ # Sun C++ 5.9 ++ _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs' ++ _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols' ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' ++ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' ++ _LT_TAGVAR(compiler_needs_object, $1)=yes ++ ++ # Not sure whether something based on ++ # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 ++ # would be better. ++ output_verbose_link_cmd='echo' ++ ++ # Archives containing C++ object files must be created using ++ # "CC -xar", where "CC" is the Sun C++ compiler. This is ++ # necessary to make sure instantiated templates are included ++ # in the archive. ++ _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' ++ ;; ++ esac ++ ;; ++ esac ++ ;; + +- if AC_TRY_EVAL(ac_compile); then +- # Now try to grab the symbols. +- nlist=conftest.nm +- if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then +- # Try sorting and uniquifying the output. +- if sort "$nlist" | uniq > "$nlist"T; then +- mv -f "$nlist"T "$nlist" +- else +- rm -f "$nlist"T +- fi ++ lynxos*) ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; + +- # Make sure that we snagged all the symbols we need. +- if grep ' nm_test_var$' "$nlist" >/dev/null; then +- if grep ' nm_test_func$' "$nlist" >/dev/null; then +- cat < conftest.$ac_ext +-#ifdef __cplusplus +-extern "C" { +-#endif ++ m88k*) ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; + +-EOF +- # Now generate the symbol file. +- eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext' ++ mvs*) ++ case $cc_basename in ++ cxx*) ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ *) ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ esac ++ ;; + +- cat <> conftest.$ac_ext +-#if defined (__STDC__) && __STDC__ +-# define lt_ptr_t void * +-#else +-# define lt_ptr_t char * +-# define const +-#endif ++ netbsd*) ++ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then ++ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' ++ wlarc= ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' ++ _LT_TAGVAR(hardcode_direct, $1)=yes ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ fi ++ # Workaround some broken pre-1.5 toolchains ++ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' ++ ;; + +-/* The mapping between symbol names and symbols. */ +-const struct { +- const char *name; +- lt_ptr_t address; +-} +-lt_preloaded_symbols[[]] = +-{ +-EOF +- $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext +- cat <<\EOF >> conftest.$ac_ext +- {0, (lt_ptr_t) 0} +-}; ++ *nto* | *qnx*) ++ _LT_TAGVAR(ld_shlibs, $1)=yes ++ ;; + +-#ifdef __cplusplus +-} +-#endif +-EOF +- # Now try linking the two files. +- mv conftest.$ac_objext conftstm.$ac_objext +- lt_save_LIBS="$LIBS" +- lt_save_CFLAGS="$CFLAGS" +- LIBS="conftstm.$ac_objext" +- CFLAGS="$CFLAGS$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)" +- if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then +- pipe_works=yes ++ openbsd2*) ++ # C++ shared libraries are fairly broken ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ ++ openbsd*) ++ if test -f /usr/libexec/ld.so; then ++ _LT_TAGVAR(hardcode_direct, $1)=yes ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' ++ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib' ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ++ _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + fi +- LIBS="$lt_save_LIBS" +- CFLAGS="$lt_save_CFLAGS" ++ output_verbose_link_cmd=echo + else +- echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD ++ _LT_TAGVAR(ld_shlibs, $1)=no + fi +- else +- echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD +- fi +- else +- echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD +- fi +- else +- echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD +- cat conftest.$ac_ext >&5 +- fi +- rm -rf conftest* conftst* ++ ;; + +- # Do not use the global_symbol_pipe unless it works. +- if test "$pipe_works" = yes; then +- break +- else +- lt_cv_sys_global_symbol_pipe= +- fi +-done +-]) +-if test -z "$lt_cv_sys_global_symbol_pipe"; then +- lt_cv_sys_global_symbol_to_cdecl= +-fi +-if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then +- AC_MSG_RESULT(failed) +-else +- AC_MSG_RESULT(ok) +-fi +-]) # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE +- +- +-# AC_LIBTOOL_PROG_COMPILER_PIC([TAGNAME]) +-# --------------------------------------- +-AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC], +-[_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)= +-_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= +-_LT_AC_TAGVAR(lt_prog_compiler_static, $1)= +- +-AC_MSG_CHECKING([for $compiler option to produce PIC]) +- ifelse([$1],[CXX],[ +- # C++ specific cases for pic, static, wl, etc. +- if test "$GXX" = yes; then +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' +- +- case $host_os in +- aix*) +- # All AIX code is PIC. +- if test "$host_cpu" = ia64; then +- # AIX 5 now supports IA64 processor +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' +- fi +- ;; +- amigaos*) +- # FIXME: we need at least 68020 code to build shared libraries, but +- # adding the `-m68020' flag to GCC prevents building anything better, +- # like `-m68040'. +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' +- ;; +- beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) +- # PIC is the default for these OSes. +- ;; +- mingw* | cygwin* | os2* | pw32*) +- # This hack is so that the source file can tell whether it is being +- # built for inclusion in a dll (and should export symbols for example). +- # Although the cygwin gcc ignores -fPIC, still need this for old-style +- # (--disable-auto-import) libraries +- m4_if([$1], [GCJ], [], +- [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) +- ;; +- darwin* | rhapsody*) +- # PIC is the default on this platform +- # Common symbols not allowed in MH_DYLIB files +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' +- ;; +- *djgpp*) +- # DJGPP does not support shared libraries at all +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= +- ;; +- interix[[3-9]]*) +- # Interix 3.x gcc -fpic/-fPIC options generate broken code. +- # Instead, we relocate shared libraries at runtime. +- ;; +- sysv4*MP*) +- if test -d /usr/nec; then +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic +- fi +- ;; +- hpux*) +- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but +- # not for PA HP-UX. +- case $host_cpu in +- hppa*64*|ia64*) +- ;; +- *) +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' +- ;; +- esac +- ;; +- *) +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' +- ;; +- esac +- else +- case $host_os in +- aix[[4-9]]*) +- # All AIX code is PIC. +- if test "$host_cpu" = ia64; then +- # AIX 5 now supports IA64 processor +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' +- else +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' +- fi +- ;; +- chorus*) +- case $cc_basename in +- cxch68*) +- # Green Hills C++ Compiler +- # _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" +- ;; +- esac +- ;; +- darwin*) +- # PIC is the default on this platform +- # Common symbols not allowed in MH_DYLIB files +- case $cc_basename in +- xlc*) +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon' +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- ;; +- esac +- ;; +- dgux*) +- case $cc_basename in +- ec++*) +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' +- ;; +- ghcx*) +- # Green Hills C++ Compiler +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' +- ;; +- *) +- ;; +- esac +- ;; +- freebsd* | dragonfly*) +- # FreeBSD uses GNU C++ +- ;; +- hpux9* | hpux10* | hpux11*) +- case $cc_basename in +- CC*) +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' +- if test "$host_cpu" != ia64; then +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z' +- fi +- ;; +- aCC*) +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' +- case $host_cpu in +- hppa*64*|ia64*) +- # +Z the default +- ;; +- *) +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z' +- ;; ++ osf3* | osf4* | osf5*) ++ case $cc_basename in ++ KCC*) ++ # Kuck and Associates, Inc. (KAI) C++ Compiler ++ ++ # KCC will only create a shared library if the output file ++ # ends with ".so" (or ".sl" for HP-UX), so rename the library ++ # to its proper name (with version) after linking. ++ _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' ++ ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' ++ _LT_TAGVAR(hardcode_libdir_separator, $1)=: ++ ++ # Archives containing C++ object files must be created using ++ # the KAI C++ compiler. ++ case $host in ++ osf3*) _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;; ++ *) _LT_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ;; + esac + ;; +- *) +- ;; +- esac +- ;; +- interix*) +- # This is c89, which is MS Visual C++ (no shared libs) +- # Anyone wants to do a port? +- ;; +- irix5* | irix6* | nonstopux*) +- case $cc_basename in +- CC*) +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' +- # CC pic flag -KPIC is the default. +- ;; +- *) +- ;; +- esac +- ;; +- linux* | k*bsd*-gnu) +- case $cc_basename in +- KCC*) +- # KAI C++ Compiler +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' +- ;; +- icpc* | ecpc*) +- # Intel C++ +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' +- ;; +- pgCC* | pgcpp*) +- # Portland Group C++ compiler. +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' +- ;; +- cxx*) +- # Compaq C++ +- # Make sure the PIC flag is empty. It appears that all Alpha +- # Linux and Compaq Tru64 Unix objects are PIC. +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ++ RCC*) ++ # Rational C++ 2.4.1 ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no + ;; +- *) +- case `$CC -V 2>&1 | sed 5q` in +- *Sun\ C*) +- # Sun C++ 5.9 +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' +- ;; ++ cxx*) ++ case $host in ++ osf3*) ++ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && $ECHO "X${wl}-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' ++ ;; ++ *) ++ _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ ++ echo "-hidden">> $lib.exp~ ++ $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~ ++ $RM $lib.exp' ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' ++ ;; + esac +- ;; +- esac +- ;; +- lynxos*) +- ;; +- m88k*) +- ;; +- mvs*) +- case $cc_basename in +- cxx*) +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall' ++ ++ _LT_TAGVAR(hardcode_libdir_separator, $1)=: ++ ++ # Commands to make compiler produce verbose output that lists ++ # what "hidden" libraries, object files and flags are used when ++ # linking a shared library. ++ # ++ # There doesn't appear to be a way to prevent this compiler from ++ # explicitly linking system object files so we need to strip them ++ # from the output so that they don't get included in the library ++ # dependencies. ++ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' + ;; + *) ++ if test "$GXX" = yes && test "$with_gnu_ld" = no; then ++ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' ++ case $host in ++ osf3*) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ ;; ++ *) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ ;; ++ esac ++ ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' ++ _LT_TAGVAR(hardcode_libdir_separator, $1)=: ++ ++ # Commands to make compiler produce verbose output that lists ++ # what "hidden" libraries, object files and flags are used when ++ # linking a shared library. ++ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"' ++ ++ else ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ fi + ;; +- esac +- ;; +- netbsd*) +- ;; +- osf3* | osf4* | osf5*) +- case $cc_basename in +- KCC*) +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' +- ;; +- RCC*) +- # Rational C++ 2.4.1 +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' ++ esac ++ ;; ++ ++ psos*) ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ ++ sunos4*) ++ case $cc_basename in ++ CC*) ++ # Sun C++ 4.x ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no + ;; +- cxx*) +- # Digital/Compaq C++ +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- # Make sure the PIC flag is empty. It appears that all Alpha +- # Linux and Compaq Tru64 Unix objects are PIC. +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ++ lcc*) ++ # Lucid ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no + ;; +- *) ++ *) ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no + ;; +- esac +- ;; +- psos*) +- ;; ++ esac ++ ;; ++ + solaris*) +- case $cc_basename in +- CC*) ++ case $cc_basename in ++ CC*) + # Sun C++ 4.2, 5.x and Centerline C++ +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' ++ _LT_TAGVAR(archive_cmds_need_lc,$1)=yes ++ _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs' ++ _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ ++ $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' ++ ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ case $host_os in ++ solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; ++ *) ++ # The compiler driver will combine and reorder linker options, ++ # but understands `-z linker_flag'. ++ # Supported since Solaris 2.6 (maybe 2.5.1?) ++ _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ++ ;; ++ esac ++ _LT_TAGVAR(link_all_deplibs, $1)=yes ++ ++ output_verbose_link_cmd='echo' ++ ++ # Archives containing C++ object files must be created using ++ # "CC -xar", where "CC" is the Sun C++ compiler. This is ++ # necessary to make sure instantiated templates are included ++ # in the archive. ++ _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' + ;; +- gcx*) ++ gcx*) + # Green Hills C++ Compiler +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' ++ ++ # The C++ compiler must be used to create the archive. ++ _LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs' + ;; +- *) ++ *) ++ # GNU C++ compiler with Solaris linker ++ if test "$GXX" = yes && test "$with_gnu_ld" = no; then ++ _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs' ++ if $CC --version | $GREP -v '^2\.7' > /dev/null; then ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ ++ $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' ++ ++ # Commands to make compiler produce verbose output that lists ++ # what "hidden" libraries, object files and flags are used when ++ # linking a shared library. ++ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"' ++ else ++ # g++ 2.7 appears to require `-G' NOT `-shared' on this ++ # platform. ++ _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ ++ $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' ++ ++ # Commands to make compiler produce verbose output that lists ++ # what "hidden" libraries, object files and flags are used when ++ # linking a shared library. ++ output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"' ++ fi ++ ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir' ++ case $host_os in ++ solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; ++ *) ++ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' ++ ;; ++ esac ++ fi + ;; +- esac +- ;; +- sunos4*) ++ esac ++ ;; ++ ++ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) ++ _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' ++ _LT_TAGVAR(archive_cmds_need_lc, $1)=no ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ runpath_var='LD_RUN_PATH' ++ ++ case $cc_basename in ++ CC*) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ *) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ esac ++ ;; ++ ++ sysv5* | sco3.2v5* | sco5v6*) ++ # Note: We can NOT use -z defs as we might desire, because we do not ++ # link with -lc, and that would cause any symbols used from libc to ++ # always be unresolved, which means just about no library would ++ # ever link correctly. If we're not using GNU ld we use -z text ++ # though, which does catch some bad symbols but isn't as heavy-handed ++ # as -z defs. ++ _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' ++ _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' ++ _LT_TAGVAR(archive_cmds_need_lc, $1)=no ++ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ++ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir' ++ _LT_TAGVAR(hardcode_libdir_separator, $1)=':' ++ _LT_TAGVAR(link_all_deplibs, $1)=yes ++ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' ++ runpath_var='LD_RUN_PATH' ++ + case $cc_basename in +- CC*) +- # Sun C++ 4.x +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' +- ;; +- lcc*) +- # Lucid +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' ++ CC*) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) ++ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac +- ;; ++ ;; ++ + tandem*) +- case $cc_basename in +- NCC*) ++ case $cc_basename in ++ NCC*) + # NonStop-UX NCC 3.20 +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' +- ;; +- *) ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no + ;; +- esac +- ;; +- sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) +- case $cc_basename in +- CC*) +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ *) ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no + ;; +- esac +- ;; ++ esac ++ ;; ++ + vxworks*) +- ;; ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ + *) +- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no +- ;; ++ # FIXME: insert proper C++ library support ++ _LT_TAGVAR(ld_shlibs, $1)=no ++ ;; + esac ++ ++ AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)]) ++ test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no ++ ++ _LT_TAGVAR(GCC, $1)="$GXX" ++ _LT_TAGVAR(LD, $1)="$LD" ++ ++ ## CAVEAT EMPTOR: ++ ## There is no encapsulation within the following macros, do not change ++ ## the running order or otherwise move them around unless you know exactly ++ ## what you are doing... ++ _LT_SYS_HIDDEN_LIBDEPS($1) ++ _LT_COMPILER_PIC($1) ++ _LT_COMPILER_C_O($1) ++ _LT_COMPILER_FILE_LOCKS($1) ++ _LT_LINKER_SHLIBS($1) ++ _LT_SYS_DYNAMIC_LINKER($1) ++ _LT_LINKER_HARDCODE_LIBPATH($1) ++ ++ _LT_CONFIG($1) ++ fi # test -n "$compiler" ++ ++ CC=$lt_save_CC ++ LDCXX=$LD ++ LD=$lt_save_LD ++ GCC=$lt_save_GCC ++ with_gnu_ld=$lt_save_with_gnu_ld ++ lt_cv_path_LDCXX=$lt_cv_path_LD ++ lt_cv_path_LD=$lt_save_path_LD ++ lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld ++ lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld ++fi # test "$_lt_caught_CXX_error" != yes ++ ++AC_LANG_POP ++])# _LT_LANG_CXX_CONFIG ++ ++ ++# _LT_SYS_HIDDEN_LIBDEPS([TAGNAME]) ++# --------------------------------- ++# Figure out "hidden" library dependencies from verbose ++# compiler output when linking a shared library. ++# Parse the compiler output and extract the necessary ++# objects, libraries and library flags. ++m4_defun([_LT_SYS_HIDDEN_LIBDEPS], ++[m4_require([_LT_FILEUTILS_DEFAULTS])dnl ++# Dependencies to place before and after the object being linked: ++_LT_TAGVAR(predep_objects, $1)= ++_LT_TAGVAR(postdep_objects, $1)= ++_LT_TAGVAR(predeps, $1)= ++_LT_TAGVAR(postdeps, $1)= ++_LT_TAGVAR(compiler_lib_search_path, $1)= ++ ++dnl we can't use the lt_simple_compile_test_code here, ++dnl because it contains code intended for an executable, ++dnl not a library. It's possible we should let each ++dnl tag define a new lt_????_link_test_code variable, ++dnl but it's only used here... ++m4_if([$1], [], [cat > conftest.$ac_ext <<_LT_EOF ++int a; ++void foo (void) { a = 0; } ++_LT_EOF ++], [$1], [CXX], [cat > conftest.$ac_ext <<_LT_EOF ++class Foo ++{ ++public: ++ Foo (void) { a = 0; } ++private: ++ int a; ++}; ++_LT_EOF ++], [$1], [F77], [cat > conftest.$ac_ext <<_LT_EOF ++ subroutine foo ++ implicit none ++ integer*4 a ++ a=0 ++ return ++ end ++_LT_EOF ++], [$1], [FC], [cat > conftest.$ac_ext <<_LT_EOF ++ subroutine foo ++ implicit none ++ integer a ++ a=0 ++ return ++ end ++_LT_EOF ++], [$1], [GCJ], [cat > conftest.$ac_ext <<_LT_EOF ++public class foo { ++ private int a; ++ public void bar (void) { ++ a = 0; ++ } ++}; ++_LT_EOF ++]) ++dnl Parse the compiler output and extract the necessary ++dnl objects, libraries and library flags. ++if AC_TRY_EVAL(ac_compile); then ++ # Parse the compiler output and extract the necessary ++ # objects, libraries and library flags. ++ ++ # Sentinel used to keep track of whether or not we are before ++ # the conftest object file. ++ pre_test_object_deps_done=no ++ ++ for p in `eval "$output_verbose_link_cmd"`; do ++ case $p in ++ ++ -L* | -R* | -l*) ++ # Some compilers place space between "-{L,R}" and the path. ++ # Remove the space. ++ if test $p = "-L" || ++ test $p = "-R"; then ++ prev=$p ++ continue ++ else ++ prev= ++ fi ++ ++ if test "$pre_test_object_deps_done" = no; then ++ case $p in ++ -L* | -R*) ++ # Internal compiler library paths should come after those ++ # provided the user. The postdeps already come after the ++ # user supplied libs so there is no need to process them. ++ if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then ++ _LT_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}" ++ else ++ _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}" ++ fi ++ ;; ++ # The "-l" case would never come before the object being ++ # linked, so don't bother handling this case. ++ esac ++ else ++ if test -z "$_LT_TAGVAR(postdeps, $1)"; then ++ _LT_TAGVAR(postdeps, $1)="${prev}${p}" ++ else ++ _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}" ++ fi ++ fi ++ ;; ++ ++ *.$objext) ++ # This assumes that the test object file only shows up ++ # once in the compiler output. ++ if test "$p" = "conftest.$objext"; then ++ pre_test_object_deps_done=yes ++ continue ++ fi ++ ++ if test "$pre_test_object_deps_done" = no; then ++ if test -z "$_LT_TAGVAR(predep_objects, $1)"; then ++ _LT_TAGVAR(predep_objects, $1)="$p" ++ else ++ _LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p" ++ fi ++ else ++ if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then ++ _LT_TAGVAR(postdep_objects, $1)="$p" ++ else ++ _LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p" ++ fi ++ fi ++ ;; ++ ++ *) ;; # Ignore the rest. ++ ++ esac ++ done ++ ++ # Clean up. ++ rm -f a.out a.exe ++else ++ echo "libtool.m4: error: problem compiling $1 test program" ++fi ++ ++$RM -f confest.$objext ++ ++# PORTME: override above test on systems where it is broken ++m4_if([$1], [CXX], ++[case $host_os in ++interix[[3-9]]*) ++ # Interix 3.5 installs completely hosed .la files for C++, so rather than ++ # hack all around it, let's just trust "g++" to DTRT. ++ _LT_TAGVAR(predep_objects,$1)= ++ _LT_TAGVAR(postdep_objects,$1)= ++ _LT_TAGVAR(postdeps,$1)= ++ ;; ++ ++linux*) ++ case `$CC -V 2>&1 | sed 5q` in ++ *Sun\ C*) ++ # Sun C++ 5.9 ++ ++ # The more standards-conforming stlport4 library is ++ # incompatible with the Cstd library. Avoid specifying ++ # it if it's in CXXFLAGS. Ignore libCrun as ++ # -library=stlport4 depends on it. ++ case " $CXX $CXXFLAGS " in ++ *" -library=stlport4 "*) ++ solaris_use_stlport4=yes ++ ;; ++ esac ++ ++ if test "$solaris_use_stlport4" != yes; then ++ _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun' ++ fi ++ ;; ++ esac ++ ;; ++ ++solaris*) ++ case $cc_basename in ++ CC*) ++ # The more standards-conforming stlport4 library is ++ # incompatible with the Cstd library. Avoid specifying ++ # it if it's in CXXFLAGS. Ignore libCrun as ++ # -library=stlport4 depends on it. ++ case " $CXX $CXXFLAGS " in ++ *" -library=stlport4 "*) ++ solaris_use_stlport4=yes ++ ;; ++ esac ++ ++ # Adding this requires a known-good setup of shared libraries for ++ # Sun compiler versions before 5.6, else PIC objects from an old ++ # archive will be linked into the output, leading to subtle bugs. ++ if test "$solaris_use_stlport4" != yes; then ++ _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun' ++ fi ++ ;; ++ esac ++ ;; ++esac ++]) ++ ++case " $_LT_TAGVAR(postdeps, $1) " in ++*" -lc "*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;; ++esac ++ _LT_TAGVAR(compiler_lib_search_dirs, $1)= ++if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then ++ _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'` ++fi ++_LT_TAGDECL([], [compiler_lib_search_dirs], [1], ++ [The directories searched by this compiler when creating a shared library]) ++_LT_TAGDECL([], [predep_objects], [1], ++ [Dependencies to place before and after the objects being linked to ++ create a shared library]) ++_LT_TAGDECL([], [postdep_objects], [1]) ++_LT_TAGDECL([], [predeps], [1]) ++_LT_TAGDECL([], [postdeps], [1]) ++_LT_TAGDECL([], [compiler_lib_search_path], [1], ++ [The library search path used internally by the compiler when linking ++ a shared library]) ++])# _LT_SYS_HIDDEN_LIBDEPS ++ ++ ++# _LT_PROG_F77 ++# ------------ ++# Since AC_PROG_F77 is broken, in that it returns the empty string ++# if there is no fortran compiler, we have our own version here. ++m4_defun([_LT_PROG_F77], ++[ ++pushdef([AC_MSG_ERROR], [_lt_disable_F77=yes]) ++AC_PROG_F77 ++if test -z "$F77" || test "X$F77" = "Xno"; then ++ _lt_disable_F77=yes ++fi ++popdef([AC_MSG_ERROR]) ++])# _LT_PROG_F77 ++ ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([_LT_PROG_F77], []) ++ ++ ++# _LT_LANG_F77_CONFIG([TAG]) ++# -------------------------- ++# Ensure that the configuration variables for a Fortran 77 compiler are ++# suitably defined. These variables are subsequently used by _LT_CONFIG ++# to write the compiler configuration to `libtool'. ++m4_defun([_LT_LANG_F77_CONFIG], ++[AC_REQUIRE([_LT_PROG_F77])dnl ++AC_LANG_PUSH(Fortran 77) ++ ++_LT_TAGVAR(archive_cmds_need_lc, $1)=no ++_LT_TAGVAR(allow_undefined_flag, $1)= ++_LT_TAGVAR(always_export_symbols, $1)=no ++_LT_TAGVAR(archive_expsym_cmds, $1)= ++_LT_TAGVAR(export_dynamic_flag_spec, $1)= ++_LT_TAGVAR(hardcode_direct, $1)=no ++_LT_TAGVAR(hardcode_direct_absolute, $1)=no ++_LT_TAGVAR(hardcode_libdir_flag_spec, $1)= ++_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= ++_LT_TAGVAR(hardcode_libdir_separator, $1)= ++_LT_TAGVAR(hardcode_minus_L, $1)=no ++_LT_TAGVAR(hardcode_automatic, $1)=no ++_LT_TAGVAR(inherit_rpath, $1)=no ++_LT_TAGVAR(module_cmds, $1)= ++_LT_TAGVAR(module_expsym_cmds, $1)= ++_LT_TAGVAR(link_all_deplibs, $1)=unknown ++_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds ++_LT_TAGVAR(no_undefined_flag, $1)= ++_LT_TAGVAR(whole_archive_flag_spec, $1)= ++_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no ++ ++# Source file extension for f77 test sources. ++ac_ext=f ++ ++# Object file extension for compiled f77 test sources. ++objext=o ++_LT_TAGVAR(objext, $1)=$objext ++ ++# No sense in running all these tests if we already determined that ++# the F77 compiler isn't working. Some variables (like enable_shared) ++# are currently assumed to apply to all compilers on this platform, ++# and will be corrupted by setting them based on a non-working compiler. ++if test "$_lt_disable_F77" != yes; then ++ # Code to be used in simple compile tests ++ lt_simple_compile_test_code="\ ++ subroutine t ++ return ++ end ++" ++ ++ # Code to be used in simple link tests ++ lt_simple_link_test_code="\ ++ program t ++ end ++" ++ ++ # ltmain only uses $CC for tagged configurations so make sure $CC is set. ++ _LT_TAG_COMPILER ++ ++ # save warnings/boilerplate of simple test code ++ _LT_COMPILER_BOILERPLATE ++ _LT_LINKER_BOILERPLATE ++ ++ # Allow CC to be a program name with arguments. ++ lt_save_CC="$CC" ++ lt_save_GCC=$GCC ++ CC=${F77-"f77"} ++ compiler=$CC ++ _LT_TAGVAR(compiler, $1)=$CC ++ _LT_CC_BASENAME([$compiler]) ++ GCC=$G77 ++ if test -n "$compiler"; then ++ AC_MSG_CHECKING([if libtool supports shared libraries]) ++ AC_MSG_RESULT([$can_build_shared]) ++ ++ AC_MSG_CHECKING([whether to build shared libraries]) ++ test "$can_build_shared" = "no" && enable_shared=no ++ ++ # On AIX, shared libraries and static libraries use the same namespace, and ++ # are all built from PIC. ++ case $host_os in ++ aix3*) ++ test "$enable_shared" = yes && enable_static=no ++ if test -n "$RANLIB"; then ++ archive_cmds="$archive_cmds~\$RANLIB \$lib" ++ postinstall_cmds='$RANLIB $lib' ++ fi ++ ;; ++ aix[[4-9]]*) ++ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then ++ test "$enable_shared" = yes && enable_static=no ++ fi ++ ;; ++ esac ++ AC_MSG_RESULT([$enable_shared]) ++ ++ AC_MSG_CHECKING([whether to build static libraries]) ++ # Make sure either enable_shared or enable_static is yes. ++ test "$enable_shared" = yes || enable_static=yes ++ AC_MSG_RESULT([$enable_static]) ++ ++ _LT_TAGVAR(GCC, $1)="$G77" ++ _LT_TAGVAR(LD, $1)="$LD" ++ ++ ## CAVEAT EMPTOR: ++ ## There is no encapsulation within the following macros, do not change ++ ## the running order or otherwise move them around unless you know exactly ++ ## what you are doing... ++ _LT_COMPILER_PIC($1) ++ _LT_COMPILER_C_O($1) ++ _LT_COMPILER_FILE_LOCKS($1) ++ _LT_LINKER_SHLIBS($1) ++ _LT_SYS_DYNAMIC_LINKER($1) ++ _LT_LINKER_HARDCODE_LIBPATH($1) ++ ++ _LT_CONFIG($1) ++ fi # test -n "$compiler" ++ ++ GCC=$lt_save_GCC ++ CC="$lt_save_CC" ++fi # test "$_lt_disable_F77" != yes ++ ++AC_LANG_POP ++])# _LT_LANG_F77_CONFIG ++ ++ ++# _LT_PROG_FC ++# ----------- ++# Since AC_PROG_FC is broken, in that it returns the empty string ++# if there is no fortran compiler, we have our own version here. ++m4_defun([_LT_PROG_FC], ++[ ++pushdef([AC_MSG_ERROR], [_lt_disable_FC=yes]) ++AC_PROG_FC ++if test -z "$FC" || test "X$FC" = "Xno"; then ++ _lt_disable_FC=yes ++fi ++popdef([AC_MSG_ERROR]) ++])# _LT_PROG_FC ++ ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([_LT_PROG_FC], []) ++ ++ ++# _LT_LANG_FC_CONFIG([TAG]) ++# ------------------------- ++# Ensure that the configuration variables for a Fortran compiler are ++# suitably defined. These variables are subsequently used by _LT_CONFIG ++# to write the compiler configuration to `libtool'. ++m4_defun([_LT_LANG_FC_CONFIG], ++[AC_REQUIRE([_LT_PROG_FC])dnl ++AC_LANG_PUSH(Fortran) ++ ++_LT_TAGVAR(archive_cmds_need_lc, $1)=no ++_LT_TAGVAR(allow_undefined_flag, $1)= ++_LT_TAGVAR(always_export_symbols, $1)=no ++_LT_TAGVAR(archive_expsym_cmds, $1)= ++_LT_TAGVAR(export_dynamic_flag_spec, $1)= ++_LT_TAGVAR(hardcode_direct, $1)=no ++_LT_TAGVAR(hardcode_direct_absolute, $1)=no ++_LT_TAGVAR(hardcode_libdir_flag_spec, $1)= ++_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= ++_LT_TAGVAR(hardcode_libdir_separator, $1)= ++_LT_TAGVAR(hardcode_minus_L, $1)=no ++_LT_TAGVAR(hardcode_automatic, $1)=no ++_LT_TAGVAR(inherit_rpath, $1)=no ++_LT_TAGVAR(module_cmds, $1)= ++_LT_TAGVAR(module_expsym_cmds, $1)= ++_LT_TAGVAR(link_all_deplibs, $1)=unknown ++_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds ++_LT_TAGVAR(no_undefined_flag, $1)= ++_LT_TAGVAR(whole_archive_flag_spec, $1)= ++_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no ++ ++# Source file extension for fc test sources. ++ac_ext=${ac_fc_srcext-f} ++ ++# Object file extension for compiled fc test sources. ++objext=o ++_LT_TAGVAR(objext, $1)=$objext ++ ++# No sense in running all these tests if we already determined that ++# the FC compiler isn't working. Some variables (like enable_shared) ++# are currently assumed to apply to all compilers on this platform, ++# and will be corrupted by setting them based on a non-working compiler. ++if test "$_lt_disable_FC" != yes; then ++ # Code to be used in simple compile tests ++ lt_simple_compile_test_code="\ ++ subroutine t ++ return ++ end ++" ++ ++ # Code to be used in simple link tests ++ lt_simple_link_test_code="\ ++ program t ++ end ++" ++ ++ # ltmain only uses $CC for tagged configurations so make sure $CC is set. ++ _LT_TAG_COMPILER ++ ++ # save warnings/boilerplate of simple test code ++ _LT_COMPILER_BOILERPLATE ++ _LT_LINKER_BOILERPLATE ++ ++ # Allow CC to be a program name with arguments. ++ lt_save_CC="$CC" ++ lt_save_GCC=$GCC ++ CC=${FC-"f95"} ++ compiler=$CC ++ GCC=$ac_cv_fc_compiler_gnu ++ ++ _LT_TAGVAR(compiler, $1)=$CC ++ _LT_CC_BASENAME([$compiler]) ++ ++ if test -n "$compiler"; then ++ AC_MSG_CHECKING([if libtool supports shared libraries]) ++ AC_MSG_RESULT([$can_build_shared]) ++ ++ AC_MSG_CHECKING([whether to build shared libraries]) ++ test "$can_build_shared" = "no" && enable_shared=no ++ ++ # On AIX, shared libraries and static libraries use the same namespace, and ++ # are all built from PIC. ++ case $host_os in ++ aix3*) ++ test "$enable_shared" = yes && enable_static=no ++ if test -n "$RANLIB"; then ++ archive_cmds="$archive_cmds~\$RANLIB \$lib" ++ postinstall_cmds='$RANLIB $lib' ++ fi ++ ;; ++ aix[[4-9]]*) ++ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then ++ test "$enable_shared" = yes && enable_static=no ++ fi ++ ;; ++ esac ++ AC_MSG_RESULT([$enable_shared]) ++ ++ AC_MSG_CHECKING([whether to build static libraries]) ++ # Make sure either enable_shared or enable_static is yes. ++ test "$enable_shared" = yes || enable_static=yes ++ AC_MSG_RESULT([$enable_static]) ++ ++ _LT_TAGVAR(GCC, $1)="$ac_cv_fc_compiler_gnu" ++ _LT_TAGVAR(LD, $1)="$LD" ++ ++ ## CAVEAT EMPTOR: ++ ## There is no encapsulation within the following macros, do not change ++ ## the running order or otherwise move them around unless you know exactly ++ ## what you are doing... ++ _LT_SYS_HIDDEN_LIBDEPS($1) ++ _LT_COMPILER_PIC($1) ++ _LT_COMPILER_C_O($1) ++ _LT_COMPILER_FILE_LOCKS($1) ++ _LT_LINKER_SHLIBS($1) ++ _LT_SYS_DYNAMIC_LINKER($1) ++ _LT_LINKER_HARDCODE_LIBPATH($1) ++ ++ _LT_CONFIG($1) ++ fi # test -n "$compiler" ++ ++ GCC=$lt_save_GCC ++ CC="$lt_save_CC" ++fi # test "$_lt_disable_FC" != yes ++ ++AC_LANG_POP ++])# _LT_LANG_FC_CONFIG ++ ++ ++# _LT_LANG_GCJ_CONFIG([TAG]) ++# -------------------------- ++# Ensure that the configuration variables for the GNU Java Compiler compiler ++# are suitably defined. These variables are subsequently used by _LT_CONFIG ++# to write the compiler configuration to `libtool'. ++m4_defun([_LT_LANG_GCJ_CONFIG], ++[AC_REQUIRE([LT_PROG_GCJ])dnl ++AC_LANG_SAVE ++ ++# Source file extension for Java test sources. ++ac_ext=java ++ ++# Object file extension for compiled Java test sources. ++objext=o ++_LT_TAGVAR(objext, $1)=$objext ++ ++# Code to be used in simple compile tests ++lt_simple_compile_test_code="class foo {}" ++ ++# Code to be used in simple link tests ++lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }' ++ ++# ltmain only uses $CC for tagged configurations so make sure $CC is set. ++_LT_TAG_COMPILER ++ ++# save warnings/boilerplate of simple test code ++_LT_COMPILER_BOILERPLATE ++_LT_LINKER_BOILERPLATE ++ ++# Allow CC to be a program name with arguments. ++lt_save_CC="$CC" ++lt_save_GCC=$GCC ++GCC=yes ++CC=${GCJ-"gcj"} ++compiler=$CC ++_LT_TAGVAR(compiler, $1)=$CC ++_LT_TAGVAR(LD, $1)="$LD" ++_LT_CC_BASENAME([$compiler]) ++ ++# GCJ did not exist at the time GCC didn't implicitly link libc in. ++_LT_TAGVAR(archive_cmds_need_lc, $1)=no ++ ++_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds ++ ++if test -n "$compiler"; then ++ _LT_COMPILER_NO_RTTI($1) ++ _LT_COMPILER_PIC($1) ++ _LT_COMPILER_C_O($1) ++ _LT_COMPILER_FILE_LOCKS($1) ++ _LT_LINKER_SHLIBS($1) ++ _LT_LINKER_HARDCODE_LIBPATH($1) ++ ++ _LT_CONFIG($1) ++fi ++ ++AC_LANG_RESTORE ++ ++GCC=$lt_save_GCC ++CC="$lt_save_CC" ++])# _LT_LANG_GCJ_CONFIG ++ ++ ++# _LT_LANG_RC_CONFIG([TAG]) ++# ------------------------- ++# Ensure that the configuration variables for the Windows resource compiler ++# are suitably defined. These variables are subsequently used by _LT_CONFIG ++# to write the compiler configuration to `libtool'. ++m4_defun([_LT_LANG_RC_CONFIG], ++[AC_REQUIRE([LT_PROG_RC])dnl ++AC_LANG_SAVE ++ ++# Source file extension for RC test sources. ++ac_ext=rc ++ ++# Object file extension for compiled RC test sources. ++objext=o ++_LT_TAGVAR(objext, $1)=$objext ++ ++# Code to be used in simple compile tests ++lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }' ++ ++# Code to be used in simple link tests ++lt_simple_link_test_code="$lt_simple_compile_test_code" ++ ++# ltmain only uses $CC for tagged configurations so make sure $CC is set. ++_LT_TAG_COMPILER ++ ++# save warnings/boilerplate of simple test code ++_LT_COMPILER_BOILERPLATE ++_LT_LINKER_BOILERPLATE ++ ++# Allow CC to be a program name with arguments. ++lt_save_CC="$CC" ++lt_save_GCC=$GCC ++GCC= ++CC=${RC-"windres"} ++compiler=$CC ++_LT_TAGVAR(compiler, $1)=$CC ++_LT_CC_BASENAME([$compiler]) ++_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes ++ ++if test -n "$compiler"; then ++ : ++ _LT_CONFIG($1) ++fi ++ ++GCC=$lt_save_GCC ++AC_LANG_RESTORE ++CC="$lt_save_CC" ++])# _LT_LANG_RC_CONFIG ++ ++ ++# LT_PROG_GCJ ++# ----------- ++AC_DEFUN([LT_PROG_GCJ], ++[m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ], ++ [m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ], ++ [AC_CHECK_TOOL(GCJ, gcj,) ++ test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2" ++ AC_SUBST(GCJFLAGS)])])[]dnl ++]) ++ ++# Old name: ++AU_ALIAS([LT_AC_PROG_GCJ], [LT_PROG_GCJ]) ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([LT_AC_PROG_GCJ], []) ++ ++ ++# LT_PROG_RC ++# ---------- ++AC_DEFUN([LT_PROG_RC], ++[AC_CHECK_TOOL(RC, windres,) ++]) ++ ++# Old name: ++AU_ALIAS([LT_AC_PROG_RC], [LT_PROG_RC]) ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([LT_AC_PROG_RC], []) ++ ++ ++# _LT_DECL_EGREP ++# -------------- ++# If we don't have a new enough Autoconf to choose the best grep ++# available, choose the one first in the user's PATH. ++m4_defun([_LT_DECL_EGREP], ++[AC_REQUIRE([AC_PROG_EGREP])dnl ++AC_REQUIRE([AC_PROG_FGREP])dnl ++test -z "$GREP" && GREP=grep ++_LT_DECL([], [GREP], [1], [A grep program that handles long lines]) ++_LT_DECL([], [EGREP], [1], [An ERE matcher]) ++_LT_DECL([], [FGREP], [1], [A literal string matcher]) ++dnl Non-bleeding-edge autoconf doesn't subst GREP, so do it here too ++AC_SUBST([GREP]) ++]) ++ ++ ++# _LT_DECL_SED ++# ------------ ++# Check for a fully-functional sed program, that truncates ++# as few characters as possible. Prefer GNU sed if found. ++m4_defun([_LT_DECL_SED], ++[AC_PROG_SED ++test -z "$SED" && SED=sed ++Xsed="$SED -e 1s/^X//" ++_LT_DECL([], [SED], [1], [A sed program that does not truncate output]) ++_LT_DECL([], [Xsed], ["\$SED -e 1s/^X//"], ++ [Sed that helps us avoid accidentally triggering echo(1) options like -n]) ++])# _LT_DECL_SED ++ ++m4_ifndef([AC_PROG_SED], [ ++# NOTE: This macro has been submitted for inclusion into # ++# GNU Autoconf as AC_PROG_SED. When it is available in # ++# a released version of Autoconf we should remove this # ++# macro and use it instead. # ++ ++m4_defun([AC_PROG_SED], ++[AC_MSG_CHECKING([for a sed that does not truncate output]) ++AC_CACHE_VAL(lt_cv_path_SED, ++[# Loop through the user's path and test for sed and gsed. ++# Then use that list of sed's as ones to test for truncation. ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for lt_ac_prog in sed gsed; do ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then ++ lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext" ++ fi ++ done ++ done ++done ++IFS=$as_save_IFS ++lt_ac_max=0 ++lt_ac_count=0 ++# Add /usr/xpg4/bin/sed as it is typically found on Solaris ++# along with /bin/sed that truncates output. ++for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do ++ test ! -f $lt_ac_sed && continue ++ cat /dev/null > conftest.in ++ lt_ac_count=0 ++ echo $ECHO_N "0123456789$ECHO_C" >conftest.in ++ # Check for GNU sed and select it if it is found. ++ if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then ++ lt_cv_path_SED=$lt_ac_sed ++ break ++ fi ++ while true; do ++ cat conftest.in conftest.in >conftest.tmp ++ mv conftest.tmp conftest.in ++ cp conftest.in conftest.nl ++ echo >>conftest.nl ++ $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break ++ cmp -s conftest.out conftest.nl || break ++ # 10000 chars as input seems more than enough ++ test $lt_ac_count -gt 10 && break ++ lt_ac_count=`expr $lt_ac_count + 1` ++ if test $lt_ac_count -gt $lt_ac_max; then ++ lt_ac_max=$lt_ac_count ++ lt_cv_path_SED=$lt_ac_sed ++ fi ++ done ++done ++]) ++SED=$lt_cv_path_SED ++AC_SUBST([SED]) ++AC_MSG_RESULT([$SED]) ++])#AC_PROG_SED ++])#m4_ifndef ++ ++# Old name: ++AU_ALIAS([LT_AC_PROG_SED], [AC_PROG_SED]) ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([LT_AC_PROG_SED], []) ++ ++ ++# _LT_CHECK_SHELL_FEATURES ++# ------------------------ ++# Find out whether the shell is Bourne or XSI compatible, ++# or has some other useful features. ++m4_defun([_LT_CHECK_SHELL_FEATURES], ++[AC_MSG_CHECKING([whether the shell understands some XSI constructs]) ++# Try some XSI features ++xsi_shell=no ++( _lt_dummy="a/b/c" ++ test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \ ++ = c,a/b,, \ ++ && eval 'test $(( 1 + 1 )) -eq 2 \ ++ && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ ++ && xsi_shell=yes ++AC_MSG_RESULT([$xsi_shell]) ++_LT_CONFIG_LIBTOOL_INIT([xsi_shell='$xsi_shell']) ++ ++AC_MSG_CHECKING([whether the shell understands "+="]) ++lt_shell_append=no ++( foo=bar; set foo baz; eval "$[1]+=\$[2]" && test "$foo" = barbaz ) \ ++ >/dev/null 2>&1 \ ++ && lt_shell_append=yes ++AC_MSG_RESULT([$lt_shell_append]) ++_LT_CONFIG_LIBTOOL_INIT([lt_shell_append='$lt_shell_append']) ++ ++if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then ++ lt_unset=unset ++else ++ lt_unset=false ++fi ++_LT_DECL([], [lt_unset], [0], [whether the shell understands "unset"])dnl ++ ++# test EBCDIC or ASCII ++case `echo X|tr X '\101'` in ++ A) # ASCII based system ++ # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr ++ lt_SP2NL='tr \040 \012' ++ lt_NL2SP='tr \015\012 \040\040' ++ ;; ++ *) # EBCDIC based system ++ lt_SP2NL='tr \100 \n' ++ lt_NL2SP='tr \r\n \100\100' ++ ;; ++esac ++_LT_DECL([SP2NL], [lt_SP2NL], [1], [turn spaces into newlines])dnl ++_LT_DECL([NL2SP], [lt_NL2SP], [1], [turn newlines into spaces])dnl ++])# _LT_CHECK_SHELL_FEATURES ++ ++ ++# _LT_PROG_XSI_SHELLFNS ++# --------------------- ++# Bourne and XSI compatible variants of some useful shell functions. ++m4_defun([_LT_PROG_XSI_SHELLFNS], ++[case $xsi_shell in ++ yes) ++ cat << \_LT_EOF >> "$cfgfile" ++ ++# func_dirname file append nondir_replacement ++# Compute the dirname of FILE. If nonempty, add APPEND to the result, ++# otherwise set result to NONDIR_REPLACEMENT. ++func_dirname () ++{ ++ case ${1} in ++ */*) func_dirname_result="${1%/*}${2}" ;; ++ * ) func_dirname_result="${3}" ;; ++ esac ++} ++ ++# func_basename file ++func_basename () ++{ ++ func_basename_result="${1##*/}" ++} ++ ++# func_dirname_and_basename file append nondir_replacement ++# perform func_basename and func_dirname in a single function ++# call: ++# dirname: Compute the dirname of FILE. If nonempty, ++# add APPEND to the result, otherwise set result ++# to NONDIR_REPLACEMENT. ++# value returned in "$func_dirname_result" ++# basename: Compute filename of FILE. ++# value retuned in "$func_basename_result" ++# Implementation must be kept synchronized with func_dirname ++# and func_basename. For efficiency, we do not delegate to ++# those functions but instead duplicate the functionality here. ++func_dirname_and_basename () ++{ ++ case ${1} in ++ */*) func_dirname_result="${1%/*}${2}" ;; ++ * ) func_dirname_result="${3}" ;; ++ esac ++ func_basename_result="${1##*/}" ++} ++ ++# func_stripname prefix suffix name ++# strip PREFIX and SUFFIX off of NAME. ++# PREFIX and SUFFIX must not contain globbing or regex special ++# characters, hashes, percent signs, but SUFFIX may contain a leading ++# dot (in which case that matches only a dot). ++func_stripname () ++{ ++ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are ++ # positional parameters, so assign one to ordinary parameter first. ++ func_stripname_result=${3} ++ func_stripname_result=${func_stripname_result#"${1}"} ++ func_stripname_result=${func_stripname_result%"${2}"} ++} ++ ++# func_opt_split ++func_opt_split () ++{ ++ func_opt_split_opt=${1%%=*} ++ func_opt_split_arg=${1#*=} ++} ++ ++# func_lo2o object ++func_lo2o () ++{ ++ case ${1} in ++ *.lo) func_lo2o_result=${1%.lo}.${objext} ;; ++ *) func_lo2o_result=${1} ;; ++ esac ++} ++ ++# func_xform libobj-or-source ++func_xform () ++{ ++ func_xform_result=${1%.*}.lo ++} ++ ++# func_arith arithmetic-term... ++func_arith () ++{ ++ func_arith_result=$(( $[*] )) ++} ++ ++# func_len string ++# STRING may not start with a hyphen. ++func_len () ++{ ++ func_len_result=${#1} ++} ++ ++_LT_EOF ++ ;; ++ *) # Bourne compatible functions. ++ cat << \_LT_EOF >> "$cfgfile" ++ ++# func_dirname file append nondir_replacement ++# Compute the dirname of FILE. If nonempty, add APPEND to the result, ++# otherwise set result to NONDIR_REPLACEMENT. ++func_dirname () ++{ ++ # Extract subdirectory from the argument. ++ func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"` ++ if test "X$func_dirname_result" = "X${1}"; then ++ func_dirname_result="${3}" ++ else ++ func_dirname_result="$func_dirname_result${2}" + fi +-], +-[ +- if test "$GCC" = yes; then +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' ++} + +- case $host_os in +- aix*) +- # All AIX code is PIC. +- if test "$host_cpu" = ia64; then +- # AIX 5 now supports IA64 processor +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' +- fi +- ;; ++# func_basename file ++func_basename () ++{ ++ func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"` ++} + +- amigaos*) +- # FIXME: we need at least 68020 code to build shared libraries, but +- # adding the `-m68020' flag to GCC prevents building anything better, +- # like `-m68040'. +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' +- ;; ++dnl func_dirname_and_basename ++dnl A portable version of this function is already defined in general.m4sh ++dnl so there is no need for it here. ++ ++# func_stripname prefix suffix name ++# strip PREFIX and SUFFIX off of NAME. ++# PREFIX and SUFFIX must not contain globbing or regex special ++# characters, hashes, percent signs, but SUFFIX may contain a leading ++# dot (in which case that matches only a dot). ++# func_strip_suffix prefix name ++func_stripname () ++{ ++ case ${2} in ++ .*) func_stripname_result=`$ECHO "X${3}" \ ++ | $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;; ++ *) func_stripname_result=`$ECHO "X${3}" \ ++ | $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;; ++ esac ++} + +- beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) +- # PIC is the default for these OSes. ++# sed scripts: ++my_sed_long_opt='1s/^\(-[[^=]]*\)=.*/\1/;q' ++my_sed_long_arg='1s/^-[[^=]]*=//' ++ ++# func_opt_split ++func_opt_split () ++{ ++ func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"` ++ func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"` ++} ++ ++# func_lo2o object ++func_lo2o () ++{ ++ func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"` ++} ++ ++# func_xform libobj-or-source ++func_xform () ++{ ++ func_xform_result=`$ECHO "X${1}" | $Xsed -e 's/\.[[^.]]*$/.lo/'` ++} ++ ++# func_arith arithmetic-term... ++func_arith () ++{ ++ func_arith_result=`expr "$[@]"` ++} ++ ++# func_len string ++# STRING may not start with a hyphen. ++func_len () ++{ ++ func_len_result=`expr "$[1]" : ".*" 2>/dev/null || echo $max_cmd_len` ++} ++ ++_LT_EOF ++esac ++ ++case $lt_shell_append in ++ yes) ++ cat << \_LT_EOF >> "$cfgfile" ++ ++# func_append var value ++# Append VALUE to the end of shell variable VAR. ++func_append () ++{ ++ eval "$[1]+=\$[2]" ++} ++_LT_EOF ++ ;; ++ *) ++ cat << \_LT_EOF >> "$cfgfile" ++ ++# func_append var value ++# Append VALUE to the end of shell variable VAR. ++func_append () ++{ ++ eval "$[1]=\$$[1]\$[2]" ++} ++ ++_LT_EOF ++ ;; ++ esac ++]) ++ ++# Helper functions for option handling. -*- Autoconf -*- ++# ++# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc. ++# Written by Gary V. Vaughan, 2004 ++# ++# This file is free software; the Free Software Foundation gives ++# unlimited permission to copy and/or distribute it, with or without ++# modifications, as long as this notice is preserved. ++ ++# serial 6 ltoptions.m4 ++ ++# This is to help aclocal find these macros, as it can't see m4_define. ++AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])]) ++ ++ ++# _LT_MANGLE_OPTION(MACRO-NAME, OPTION-NAME) ++# ------------------------------------------ ++m4_define([_LT_MANGLE_OPTION], ++[[_LT_OPTION_]m4_bpatsubst($1__$2, [[^a-zA-Z0-9_]], [_])]) ++ ++ ++# _LT_SET_OPTION(MACRO-NAME, OPTION-NAME) ++# --------------------------------------- ++# Set option OPTION-NAME for macro MACRO-NAME, and if there is a ++# matching handler defined, dispatch to it. Other OPTION-NAMEs are ++# saved as a flag. ++m4_define([_LT_SET_OPTION], ++[m4_define(_LT_MANGLE_OPTION([$1], [$2]))dnl ++m4_ifdef(_LT_MANGLE_DEFUN([$1], [$2]), ++ _LT_MANGLE_DEFUN([$1], [$2]), ++ [m4_warning([Unknown $1 option `$2'])])[]dnl ++]) ++ ++ ++# _LT_IF_OPTION(MACRO-NAME, OPTION-NAME, IF-SET, [IF-NOT-SET]) ++# ------------------------------------------------------------ ++# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. ++m4_define([_LT_IF_OPTION], ++[m4_ifdef(_LT_MANGLE_OPTION([$1], [$2]), [$3], [$4])]) ++ ++ ++# _LT_UNLESS_OPTIONS(MACRO-NAME, OPTION-LIST, IF-NOT-SET) ++# ------------------------------------------------------- ++# Execute IF-NOT-SET unless all options in OPTION-LIST for MACRO-NAME ++# are set. ++m4_define([_LT_UNLESS_OPTIONS], ++[m4_foreach([_LT_Option], m4_split(m4_normalize([$2])), ++ [m4_ifdef(_LT_MANGLE_OPTION([$1], _LT_Option), ++ [m4_define([$0_found])])])[]dnl ++m4_ifdef([$0_found], [m4_undefine([$0_found])], [$3 ++])[]dnl ++]) ++ ++ ++# _LT_SET_OPTIONS(MACRO-NAME, OPTION-LIST) ++# ---------------------------------------- ++# OPTION-LIST is a space-separated list of Libtool options associated ++# with MACRO-NAME. If any OPTION has a matching handler declared with ++# LT_OPTION_DEFINE, dispatch to that macro; otherwise complain about ++# the unknown option and exit. ++m4_defun([_LT_SET_OPTIONS], ++[# Set options ++m4_foreach([_LT_Option], m4_split(m4_normalize([$2])), ++ [_LT_SET_OPTION([$1], _LT_Option)]) ++ ++m4_if([$1],[LT_INIT],[ ++ dnl ++ dnl Simply set some default values (i.e off) if boolean options were not ++ dnl specified: ++ _LT_UNLESS_OPTIONS([LT_INIT], [dlopen], [enable_dlopen=no ++ ]) ++ _LT_UNLESS_OPTIONS([LT_INIT], [win32-dll], [enable_win32_dll=no ++ ]) ++ dnl ++ dnl If no reference was made to various pairs of opposing options, then ++ dnl we run the default mode handler for the pair. For example, if neither ++ dnl `shared' nor `disable-shared' was passed, we enable building of shared ++ dnl archives by default: ++ _LT_UNLESS_OPTIONS([LT_INIT], [shared disable-shared], [_LT_ENABLE_SHARED]) ++ _LT_UNLESS_OPTIONS([LT_INIT], [static disable-static], [_LT_ENABLE_STATIC]) ++ _LT_UNLESS_OPTIONS([LT_INIT], [pic-only no-pic], [_LT_WITH_PIC]) ++ _LT_UNLESS_OPTIONS([LT_INIT], [fast-install disable-fast-install], ++ [_LT_ENABLE_FAST_INSTALL]) ++ ]) ++])# _LT_SET_OPTIONS ++ ++ ++ ++# _LT_MANGLE_DEFUN(MACRO-NAME, OPTION-NAME) ++# ----------------------------------------- ++m4_define([_LT_MANGLE_DEFUN], ++[[_LT_OPTION_DEFUN_]m4_bpatsubst(m4_toupper([$1__$2]), [[^A-Z0-9_]], [_])]) ++ ++ ++# LT_OPTION_DEFINE(MACRO-NAME, OPTION-NAME, CODE) ++# ----------------------------------------------- ++m4_define([LT_OPTION_DEFINE], ++[m4_define(_LT_MANGLE_DEFUN([$1], [$2]), [$3])[]dnl ++])# LT_OPTION_DEFINE ++ ++ ++# dlopen ++# ------ ++LT_OPTION_DEFINE([LT_INIT], [dlopen], [enable_dlopen=yes ++]) ++ ++AU_DEFUN([AC_LIBTOOL_DLOPEN], ++[_LT_SET_OPTION([LT_INIT], [dlopen]) ++AC_DIAGNOSE([obsolete], ++[$0: Remove this warning and the call to _LT_SET_OPTION when you ++put the `dlopen' option into LT_INIT's first parameter.]) ++]) ++ ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([AC_LIBTOOL_DLOPEN], []) ++ ++ ++# win32-dll ++# --------- ++# Declare package support for building win32 dll's. ++LT_OPTION_DEFINE([LT_INIT], [win32-dll], ++[enable_win32_dll=yes ++ ++case $host in ++*-*-cygwin* | *-*-mingw* | *-*-pw32*) ++ AC_CHECK_TOOL(AS, as, false) ++ AC_CHECK_TOOL(DLLTOOL, dlltool, false) ++ AC_CHECK_TOOL(OBJDUMP, objdump, false) ++ ;; ++esac ++ ++test -z "$AS" && AS=as ++_LT_DECL([], [AS], [0], [Assembler program])dnl ++ ++test -z "$DLLTOOL" && DLLTOOL=dlltool ++_LT_DECL([], [DLLTOOL], [0], [DLL creation program])dnl ++ ++test -z "$OBJDUMP" && OBJDUMP=objdump ++_LT_DECL([], [OBJDUMP], [0], [Object dumper program])dnl ++])# win32-dll ++ ++AU_DEFUN([AC_LIBTOOL_WIN32_DLL], ++[AC_REQUIRE([AC_CANONICAL_HOST])dnl ++_LT_SET_OPTION([LT_INIT], [win32-dll]) ++AC_DIAGNOSE([obsolete], ++[$0: Remove this warning and the call to _LT_SET_OPTION when you ++put the `win32-dll' option into LT_INIT's first parameter.]) ++]) ++ ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([AC_LIBTOOL_WIN32_DLL], []) ++ ++ ++# _LT_ENABLE_SHARED([DEFAULT]) ++# ---------------------------- ++# implement the --enable-shared flag, and supports the `shared' and ++# `disable-shared' LT_INIT options. ++# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. ++m4_define([_LT_ENABLE_SHARED], ++[m4_define([_LT_ENABLE_SHARED_DEFAULT], [m4_if($1, no, no, yes)])dnl ++AC_ARG_ENABLE([shared], ++ [AS_HELP_STRING([--enable-shared@<:@=PKGS@:>@], ++ [build shared libraries @<:@default=]_LT_ENABLE_SHARED_DEFAULT[@:>@])], ++ [p=${PACKAGE-default} ++ case $enableval in ++ yes) enable_shared=yes ;; ++ no) enable_shared=no ;; ++ *) ++ enable_shared=no ++ # Look at the argument we got. We use all the common list separators. ++ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," ++ for pkg in $enableval; do ++ IFS="$lt_save_ifs" ++ if test "X$pkg" = "X$p"; then ++ enable_shared=yes ++ fi ++ done ++ IFS="$lt_save_ifs" + ;; ++ esac], ++ [enable_shared=]_LT_ENABLE_SHARED_DEFAULT) + +- mingw* | cygwin* | pw32* | os2*) +- # This hack is so that the source file can tell whether it is being +- # built for inclusion in a dll (and should export symbols for example). +- # Although the cygwin gcc ignores -fPIC, still need this for old-style +- # (--disable-auto-import) libraries +- m4_if([$1], [GCJ], [], +- [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) ++ _LT_DECL([build_libtool_libs], [enable_shared], [0], ++ [Whether or not to build shared libraries]) ++])# _LT_ENABLE_SHARED ++ ++LT_OPTION_DEFINE([LT_INIT], [shared], [_LT_ENABLE_SHARED([yes])]) ++LT_OPTION_DEFINE([LT_INIT], [disable-shared], [_LT_ENABLE_SHARED([no])]) ++ ++# Old names: ++AC_DEFUN([AC_ENABLE_SHARED], ++[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[shared]) ++]) ++ ++AC_DEFUN([AC_DISABLE_SHARED], ++[_LT_SET_OPTION([LT_INIT], [disable-shared]) ++]) ++ ++AU_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)]) ++AU_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)]) ++ ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([AM_ENABLE_SHARED], []) ++dnl AC_DEFUN([AM_DISABLE_SHARED], []) ++ ++ ++ ++# _LT_ENABLE_STATIC([DEFAULT]) ++# ---------------------------- ++# implement the --enable-static flag, and support the `static' and ++# `disable-static' LT_INIT options. ++# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. ++m4_define([_LT_ENABLE_STATIC], ++[m4_define([_LT_ENABLE_STATIC_DEFAULT], [m4_if($1, no, no, yes)])dnl ++AC_ARG_ENABLE([static], ++ [AS_HELP_STRING([--enable-static@<:@=PKGS@:>@], ++ [build static libraries @<:@default=]_LT_ENABLE_STATIC_DEFAULT[@:>@])], ++ [p=${PACKAGE-default} ++ case $enableval in ++ yes) enable_static=yes ;; ++ no) enable_static=no ;; ++ *) ++ enable_static=no ++ # Look at the argument we got. We use all the common list separators. ++ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," ++ for pkg in $enableval; do ++ IFS="$lt_save_ifs" ++ if test "X$pkg" = "X$p"; then ++ enable_static=yes ++ fi ++ done ++ IFS="$lt_save_ifs" + ;; ++ esac], ++ [enable_static=]_LT_ENABLE_STATIC_DEFAULT) + +- darwin* | rhapsody*) +- # PIC is the default on this platform +- # Common symbols not allowed in MH_DYLIB files +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' ++ _LT_DECL([build_old_libs], [enable_static], [0], ++ [Whether or not to build static libraries]) ++])# _LT_ENABLE_STATIC ++ ++LT_OPTION_DEFINE([LT_INIT], [static], [_LT_ENABLE_STATIC([yes])]) ++LT_OPTION_DEFINE([LT_INIT], [disable-static], [_LT_ENABLE_STATIC([no])]) ++ ++# Old names: ++AC_DEFUN([AC_ENABLE_STATIC], ++[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[static]) ++]) ++ ++AC_DEFUN([AC_DISABLE_STATIC], ++[_LT_SET_OPTION([LT_INIT], [disable-static]) ++]) ++ ++AU_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)]) ++AU_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)]) ++ ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([AM_ENABLE_STATIC], []) ++dnl AC_DEFUN([AM_DISABLE_STATIC], []) ++ ++ ++ ++# _LT_ENABLE_FAST_INSTALL([DEFAULT]) ++# ---------------------------------- ++# implement the --enable-fast-install flag, and support the `fast-install' ++# and `disable-fast-install' LT_INIT options. ++# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. ++m4_define([_LT_ENABLE_FAST_INSTALL], ++[m4_define([_LT_ENABLE_FAST_INSTALL_DEFAULT], [m4_if($1, no, no, yes)])dnl ++AC_ARG_ENABLE([fast-install], ++ [AS_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@], ++ [optimize for fast installation @<:@default=]_LT_ENABLE_FAST_INSTALL_DEFAULT[@:>@])], ++ [p=${PACKAGE-default} ++ case $enableval in ++ yes) enable_fast_install=yes ;; ++ no) enable_fast_install=no ;; ++ *) ++ enable_fast_install=no ++ # Look at the argument we got. We use all the common list separators. ++ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," ++ for pkg in $enableval; do ++ IFS="$lt_save_ifs" ++ if test "X$pkg" = "X$p"; then ++ enable_fast_install=yes ++ fi ++ done ++ IFS="$lt_save_ifs" + ;; ++ esac], ++ [enable_fast_install=]_LT_ENABLE_FAST_INSTALL_DEFAULT) + +- interix[[3-9]]*) +- # Interix 3.x gcc -fpic/-fPIC options generate broken code. +- # Instead, we relocate shared libraries at runtime. +- ;; ++_LT_DECL([fast_install], [enable_fast_install], [0], ++ [Whether or not to optimize for fast installation])dnl ++])# _LT_ENABLE_FAST_INSTALL + +- msdosdjgpp*) +- # Just because we use GCC doesn't mean we suddenly get shared libraries +- # on systems that don't support them. +- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no +- enable_shared=no +- ;; ++LT_OPTION_DEFINE([LT_INIT], [fast-install], [_LT_ENABLE_FAST_INSTALL([yes])]) ++LT_OPTION_DEFINE([LT_INIT], [disable-fast-install], [_LT_ENABLE_FAST_INSTALL([no])]) + +- sysv4*MP*) +- if test -d /usr/nec; then +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic +- fi +- ;; ++# Old names: ++AU_DEFUN([AC_ENABLE_FAST_INSTALL], ++[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[fast-install]) ++AC_DIAGNOSE([obsolete], ++[$0: Remove this warning and the call to _LT_SET_OPTION when you put ++the `fast-install' option into LT_INIT's first parameter.]) ++]) + +- hpux*) +- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but +- # not for PA HP-UX. +- case $host_cpu in +- hppa*64*|ia64*) +- # +Z the default +- ;; +- *) +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' +- ;; +- esac +- ;; ++AU_DEFUN([AC_DISABLE_FAST_INSTALL], ++[_LT_SET_OPTION([LT_INIT], [disable-fast-install]) ++AC_DIAGNOSE([obsolete], ++[$0: Remove this warning and the call to _LT_SET_OPTION when you put ++the `disable-fast-install' option into LT_INIT's first parameter.]) ++]) + +- *) +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' +- ;; +- esac +- else +- # PORTME Check for flag to pass linker flags through the system compiler. +- case $host_os in +- aix*) +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- if test "$host_cpu" = ia64; then +- # AIX 5 now supports IA64 processor +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' +- else +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' +- fi +- ;; +- darwin*) +- # PIC is the default on this platform +- # Common symbols not allowed in MH_DYLIB files +- case $cc_basename in +- xlc*) +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon' +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- ;; +- esac +- ;; ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([AC_ENABLE_FAST_INSTALL], []) ++dnl AC_DEFUN([AM_DISABLE_FAST_INSTALL], []) + +- mingw* | cygwin* | pw32* | os2*) +- # This hack is so that the source file can tell whether it is being +- # built for inclusion in a dll (and should export symbols for example). +- m4_if([$1], [GCJ], [], +- [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) +- ;; + +- hpux9* | hpux10* | hpux11*) +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but +- # not for PA HP-UX. +- case $host_cpu in +- hppa*64*|ia64*) +- # +Z the default +- ;; +- *) +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z' +- ;; +- esac +- # Is there a better lt_prog_compiler_static that works with the bundled CC? +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' +- ;; ++# _LT_WITH_PIC([MODE]) ++# -------------------- ++# implement the --with-pic flag, and support the `pic-only' and `no-pic' ++# LT_INIT options. ++# MODE is either `yes' or `no'. If omitted, it defaults to `both'. ++m4_define([_LT_WITH_PIC], ++[AC_ARG_WITH([pic], ++ [AS_HELP_STRING([--with-pic], ++ [try to use only PIC/non-PIC objects @<:@default=use both@:>@])], ++ [pic_mode="$withval"], ++ [pic_mode=default]) + +- irix5* | irix6* | nonstopux*) +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- # PIC (with -KPIC) is the default. +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' +- ;; ++test -z "$pic_mode" && pic_mode=m4_default([$1], [default]) + +- newsos6) +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' +- ;; ++_LT_DECL([], [pic_mode], [0], [What type of objects to build])dnl ++])# _LT_WITH_PIC + +- linux* | k*bsd*-gnu) +- case $cc_basename in +- icc* | ecc*) +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' +- ;; +- pgcc* | pgf77* | pgf90* | pgf95*) +- # Portland Group compilers (*not* the Pentium gcc compiler, +- # which looks to be a dead project) +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' +- ;; +- ccc*) +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- # All Alpha code is PIC. +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' +- ;; +- *) +- case `$CC -V 2>&1 | sed 5q` in +- *Sun\ C*) +- # Sun C 5.9 +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- ;; +- *Sun\ F*) +- # Sun Fortran 8.3 passes all unrecognized flags to the linker +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='' +- ;; +- esac +- ;; +- esac +- ;; ++LT_OPTION_DEFINE([LT_INIT], [pic-only], [_LT_WITH_PIC([yes])]) ++LT_OPTION_DEFINE([LT_INIT], [no-pic], [_LT_WITH_PIC([no])]) + +- osf3* | osf4* | osf5*) +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- # All OSF/1 code is PIC. +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' +- ;; ++# Old name: ++AU_DEFUN([AC_LIBTOOL_PICMODE], ++[_LT_SET_OPTION([LT_INIT], [pic-only]) ++AC_DIAGNOSE([obsolete], ++[$0: Remove this warning and the call to _LT_SET_OPTION when you ++put the `pic-only' option into LT_INIT's first parameter.]) ++]) + +- rdos*) +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' +- ;; ++dnl aclocal-1.4 backwards compatibility: ++dnl AC_DEFUN([AC_LIBTOOL_PICMODE], []) + +- solaris*) +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' +- case $cc_basename in +- f77* | f90* | f95*) +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';; +- *) +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';; +- esac +- ;; + +- sunos4*) +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' +- ;; ++m4_define([_LTDL_MODE], []) ++LT_OPTION_DEFINE([LTDL_INIT], [nonrecursive], ++ [m4_define([_LTDL_MODE], [nonrecursive])]) ++LT_OPTION_DEFINE([LTDL_INIT], [recursive], ++ [m4_define([_LTDL_MODE], [recursive])]) ++LT_OPTION_DEFINE([LTDL_INIT], [subproject], ++ [m4_define([_LTDL_MODE], [subproject])]) + +- sysv4 | sysv4.2uw2* | sysv4.3*) +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' +- ;; ++m4_define([_LTDL_TYPE], []) ++LT_OPTION_DEFINE([LTDL_INIT], [installable], ++ [m4_define([_LTDL_TYPE], [installable])]) ++LT_OPTION_DEFINE([LTDL_INIT], [convenience], ++ [m4_define([_LTDL_TYPE], [convenience])]) + +- sysv4*MP*) +- if test -d /usr/nec ;then +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic' +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' +- fi +- ;; ++# ltsugar.m4 -- libtool m4 base layer. -*-Autoconf-*- ++# ++# Copyright (C) 2004, 2005, 2007 Free Software Foundation, Inc. ++# Written by Gary V. Vaughan, 2004 ++# ++# This file is free software; the Free Software Foundation gives ++# unlimited permission to copy and/or distribute it, with or without ++# modifications, as long as this notice is preserved. + +- sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' +- ;; ++# serial 5 ltsugar.m4 + +- unicos*) +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no +- ;; ++# This is to help aclocal find these macros, as it can't see m4_define. ++AC_DEFUN([LTSUGAR_VERSION], [m4_if([0.1])]) + +- uts4*) +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' +- ;; + +- *) +- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no +- ;; +- esac +- fi +-]) +-AC_MSG_RESULT([$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)]) ++# lt_join(SEP, ARG1, [ARG2...]) ++# ----------------------------- ++# Produce ARG1SEPARG2...SEPARGn, omitting [] arguments and their ++# associated separator. ++# Needed until we can rely on m4_join from Autoconf 2.62, since all earlier ++# versions in m4sugar had bugs. ++m4_define([lt_join], ++[m4_if([$#], [1], [], ++ [$#], [2], [[$2]], ++ [m4_if([$2], [], [], [[$2]_])$0([$1], m4_shift(m4_shift($@)))])]) ++m4_define([_lt_join], ++[m4_if([$#$2], [2], [], ++ [m4_if([$2], [], [], [[$1$2]])$0([$1], m4_shift(m4_shift($@)))])]) + +-# +-# Check to make sure the PIC flag actually works. +-# +-if test -n "$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)"; then +- AC_LIBTOOL_COMPILER_OPTION([if $compiler PIC flag $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) works], +- _LT_AC_TAGVAR(lt_cv_prog_compiler_pic_works, $1), +- [$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])], [], +- [case $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) in +- "" | " "*) ;; +- *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)" ;; +- esac], +- [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= +- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no]) +-fi +-case $host_os in +- # For platforms which do not support PIC, -DPIC is meaningless: +- *djgpp*) +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= +- ;; +- *) +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])" +- ;; +-esac + +-# +-# Check to make sure the static flag actually works. +-# +-wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_AC_TAGVAR(lt_prog_compiler_static, $1)\" +-AC_LIBTOOL_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works], +- _LT_AC_TAGVAR(lt_cv_prog_compiler_static_works, $1), +- $lt_tmp_static_flag, +- [], +- [_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=]) ++# lt_car(LIST) ++# lt_cdr(LIST) ++# ------------ ++# Manipulate m4 lists. ++# These macros are necessary as long as will still need to support ++# Autoconf-2.59 which quotes differently. ++m4_define([lt_car], [[$1]]) ++m4_define([lt_cdr], ++[m4_if([$#], 0, [m4_fatal([$0: cannot be called without arguments])], ++ [$#], 1, [], ++ [m4_dquote(m4_shift($@))])]) ++m4_define([lt_unquote], $1) ++ ++ ++# lt_append(MACRO-NAME, STRING, [SEPARATOR]) ++# ------------------------------------------ ++# Redefine MACRO-NAME to hold its former content plus `SEPARATOR'`STRING'. ++# Note that neither SEPARATOR nor STRING are expanded; they are appended ++# to MACRO-NAME as is (leaving the expansion for when MACRO-NAME is invoked). ++# No SEPARATOR is output if MACRO-NAME was previously undefined (different ++# than defined and empty). ++# ++# This macro is needed until we can rely on Autoconf 2.62, since earlier ++# versions of m4sugar mistakenly expanded SEPARATOR but not STRING. ++m4_define([lt_append], ++[m4_define([$1], ++ m4_ifdef([$1], [m4_defn([$1])[$3]])[$2])]) ++ ++ ++ ++# lt_combine(SEP, PREFIX-LIST, INFIX, SUFFIX1, [SUFFIX2...]) ++# ---------------------------------------------------------- ++# Produce a SEP delimited list of all paired combinations of elements of ++# PREFIX-LIST with SUFFIX1 through SUFFIXn. Each element of the list ++# has the form PREFIXmINFIXSUFFIXn. ++m4_define([lt_combine], ++[m4_if([$2], [], [], ++ [m4_if([$4], [], [], ++ [lt_join(m4_quote(m4_default([$1], [[, ]])), ++ lt_unquote(m4_split(m4_normalize(m4_foreach(_Lt_prefix, [$2], ++ [m4_foreach(_Lt_suffix, lt_car([m4_shiftn(3, $@)]), ++ [_Lt_prefix[]$3[]_Lt_suffix ])])))))])])dnl + ]) + + +-# AC_LIBTOOL_PROG_LD_SHLIBS([TAGNAME]) +-# ------------------------------------ +-# See if the linker supports building shared libraries. +-AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS], +-[AC_REQUIRE([LT_AC_PROG_SED])dnl +-AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) +-ifelse([$1],[CXX],[ +- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' +- case $host_os in +- aix[[4-9]]*) +- # If we're using GNU nm, then we don't want the "-C" option. +- # -C means demangle to AIX nm, but means don't demangle with GNU nm +- if $NM -V 2>&1 | grep 'GNU' > /dev/null; then +- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' +- else +- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' +- fi +- ;; +- pw32*) +- _LT_AC_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds" +- ;; +- cygwin* | mingw*) +- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;/^.*[[ ]]__nm__/s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols' +- ;; +- *) +- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' +- ;; +- esac +- _LT_AC_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] +-],[ +- runpath_var= +- _LT_AC_TAGVAR(allow_undefined_flag, $1)= +- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no +- _LT_AC_TAGVAR(archive_cmds, $1)= +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)= +- _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)= +- _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)= +- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)= +- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= +- _LT_AC_TAGVAR(thread_safe_flag_spec, $1)= +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= +- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= +- _LT_AC_TAGVAR(hardcode_direct, $1)=no +- _LT_AC_TAGVAR(hardcode_minus_L, $1)=no +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported +- _LT_AC_TAGVAR(link_all_deplibs, $1)=unknown +- _LT_AC_TAGVAR(hardcode_automatic, $1)=no +- _LT_AC_TAGVAR(module_cmds, $1)= +- _LT_AC_TAGVAR(module_expsym_cmds, $1)= +- _LT_AC_TAGVAR(always_export_symbols, $1)=no +- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' +- # include_expsyms should be a list of space-separated symbols to be *always* +- # included in the symbol list +- _LT_AC_TAGVAR(include_expsyms, $1)= +- # exclude_expsyms can be an extended regexp of symbols to exclude +- # it will be wrapped by ` (' and `)$', so one must not match beginning or +- # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', +- # as well as any symbol that contains `d'. +- _LT_AC_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] +- # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out +- # platforms (ab)use it in PIC code, but their linkers get confused if +- # the symbol is explicitly referenced. Since portable code cannot +- # rely on this symbol name, it's probably fine to never include it in +- # preloaded symbol tables. +- # Exclude shared library initialization/finalization symbols. +-dnl Note also adjust exclude_expsyms for C++ above. +- extract_expsyms_cmds= +- # Just being paranoid about ensuring that cc_basename is set. +- _LT_CC_BASENAME([$compiler]) +- case $host_os in +- cygwin* | mingw* | pw32*) +- # FIXME: the MSVC++ port hasn't been tested in a loooong time +- # When not using gcc, we currently assume that we are using +- # Microsoft Visual C++. +- if test "$GCC" != yes; then +- with_gnu_ld=no +- fi +- ;; +- interix*) +- # we just hope/assume this is gcc and not c89 (= MSVC++) +- with_gnu_ld=yes +- ;; +- openbsd*) +- with_gnu_ld=no +- ;; +- esac ++# lt_if_append_uniq(MACRO-NAME, VARNAME, [SEPARATOR], [UNIQ], [NOT-UNIQ]) ++# ----------------------------------------------------------------------- ++# Iff MACRO-NAME does not yet contain VARNAME, then append it (delimited ++# by SEPARATOR if supplied) and expand UNIQ, else NOT-UNIQ. ++m4_define([lt_if_append_uniq], ++[m4_ifdef([$1], ++ [m4_if(m4_index([$3]m4_defn([$1])[$3], [$3$2$3]), [-1], ++ [lt_append([$1], [$2], [$3])$4], ++ [$5])], ++ [lt_append([$1], [$2], [$3])$4])]) + +- _LT_AC_TAGVAR(ld_shlibs, $1)=yes +- if test "$with_gnu_ld" = yes; then +- # If archive_cmds runs LD, not CC, wlarc should be empty +- wlarc='${wl}' + +- # Set some defaults for GNU ld with shared library support. These +- # are reset later if shared libraries are not supported. Putting them +- # here allows them to be overridden if necessary. +- runpath_var=LD_RUN_PATH +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' +- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' +- # ancient GNU ld didn't support --whole-archive et. al. +- if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then +- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' +- else +- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= +- fi +- supports_anon_versioning=no +- case `$LD -v 2>/dev/null` in +- *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11 +- *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... +- *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... +- *\ 2.11.*) ;; # other 2.11 versions +- *) supports_anon_versioning=yes ;; +- esac ++# lt_dict_add(DICT, KEY, VALUE) ++# ----------------------------- ++m4_define([lt_dict_add], ++[m4_define([$1($2)], [$3])]) + +- # See if GNU ld supports shared libraries. +- case $host_os in +- aix[[3-9]]*) +- # On AIX/PPC, the GNU linker is very broken +- if test "$host_cpu" != ia64; then +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- cat <&2 + +-*** Warning: the GNU linker, at least up to release 2.9.1, is reported +-*** to be unable to reliably create shared libraries on AIX. +-*** Therefore, libtool is disabling shared libraries support. If you +-*** really care for shared libraries, you may want to modify your PATH +-*** so that a non-GNU linker is found, and then restart. ++# lt_dict_add_subkey(DICT, KEY, SUBKEY, VALUE) ++# -------------------------------------------- ++m4_define([lt_dict_add_subkey], ++[m4_define([$1($2:$3)], [$4])]) + +-EOF +- fi +- ;; + +- amigaos*) +- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' +- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes +- +- # Samuel A. Falvo II reports +- # that the semantics of dynamic libraries on AmigaOS, at least up +- # to version 4, is to share data among multiple programs linked +- # with the same dynamic library. Since this doesn't match the +- # behavior of shared libraries on other platforms, we can't use +- # them. +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- ;; ++# lt_dict_fetch(DICT, KEY, [SUBKEY]) ++# ---------------------------------- ++m4_define([lt_dict_fetch], ++[m4_ifval([$3], ++ m4_ifdef([$1($2:$3)], [m4_defn([$1($2:$3)])]), ++ m4_ifdef([$1($2)], [m4_defn([$1($2)])]))]) + +- beos*) +- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then +- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported +- # Joseph Beckenbach says some releases of gcc +- # support --undefined. This deserves some investigation. FIXME +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- else +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- fi +- ;; + +- cygwin* | mingw* | pw32*) +- # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, +- # as there is no search path for DLLs. +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' +- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported +- _LT_AC_TAGVAR(always_export_symbols, $1)=no +- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes +- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/'\'' -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols' ++# lt_if_dict_fetch(DICT, KEY, [SUBKEY], VALUE, IF-TRUE, [IF-FALSE]) ++# ----------------------------------------------------------------- ++m4_define([lt_if_dict_fetch], ++[m4_if(lt_dict_fetch([$1], [$2], [$3]), [$4], ++ [$5], ++ [$6])]) ++ ++ ++# lt_dict_filter(DICT, [SUBKEY], VALUE, [SEPARATOR], KEY, [...]) ++# -------------------------------------------------------------- ++m4_define([lt_dict_filter], ++[m4_if([$5], [], [], ++ [lt_join(m4_quote(m4_default([$4], [[, ]])), ++ lt_unquote(m4_split(m4_normalize(m4_foreach(_Lt_key, lt_car([m4_shiftn(4, $@)]), ++ [lt_if_dict_fetch([$1], _Lt_key, [$2], [$3], [_Lt_key ])])))))])[]dnl ++]) ++ ++# ltversion.m4 -- version numbers -*- Autoconf -*- ++# ++# Copyright (C) 2004 Free Software Foundation, Inc. ++# Written by Scott James Remnant, 2004 ++# ++# This file is free software; the Free Software Foundation gives ++# unlimited permission to copy and/or distribute it, with or without ++# modifications, as long as this notice is preserved. ++ ++# Generated from ltversion.in. ++ ++# serial 2976 ltversion.m4 ++# This file is part of GNU Libtool ++ ++m4_define([LT_PACKAGE_VERSION], [2.2.4]) ++m4_define([LT_PACKAGE_REVISION], [1.2976]) ++ ++AC_DEFUN([LTVERSION_VERSION], ++[macro_version='2.2.4' ++macro_revision='1.2976' ++_LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?]) ++_LT_DECL(, macro_revision, 0) ++]) ++ ++# lt~obsolete.m4 -- aclocal satisfying obsolete definitions. -*-Autoconf-*- ++# ++# Copyright (C) 2004, 2005, 2007 Free Software Foundation, Inc. ++# Written by Scott James Remnant, 2004. ++# ++# This file is free software; the Free Software Foundation gives ++# unlimited permission to copy and/or distribute it, with or without ++# modifications, as long as this notice is preserved. ++ ++# serial 4 lt~obsolete.m4 ++ ++# These exist entirely to fool aclocal when bootstrapping libtool. ++# ++# In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN) ++# which have later been changed to m4_define as they aren't part of the ++# exported API, or moved to Autoconf or Automake where they belong. ++# ++# The trouble is, aclocal is a bit thick. It'll see the old AC_DEFUN ++# in /usr/share/aclocal/libtool.m4 and remember it, then when it sees us ++# using a macro with the same name in our local m4/libtool.m4 it'll ++# pull the old libtool.m4 in (it doesn't see our shiny new m4_define ++# and doesn't know about Autoconf macros at all.) ++# ++# So we provide this file, which has a silly filename so it's always ++# included after everything else. This provides aclocal with the ++# AC_DEFUNs it wants, but when m4 processes it, it doesn't do anything ++# because those macros already exist, or will be overwritten later. ++# We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6. ++# ++# Anytime we withdraw an AC_DEFUN or AU_DEFUN, remember to add it here. ++# Yes, that means every name once taken will need to remain here until ++# we give up compatibility with versions before 1.7, at which point ++# we need to keep only those names which we still refer to. ++ ++# This is to help aclocal find these macros, as it can't see m4_define. ++AC_DEFUN([LTOBSOLETE_VERSION], [m4_if([1])]) ++ ++m4_ifndef([AC_LIBTOOL_LINKER_OPTION], [AC_DEFUN([AC_LIBTOOL_LINKER_OPTION])]) ++m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP])]) ++m4_ifndef([_LT_AC_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH])]) ++m4_ifndef([_LT_AC_SHELL_INIT], [AC_DEFUN([_LT_AC_SHELL_INIT])]) ++m4_ifndef([_LT_AC_SYS_LIBPATH_AIX], [AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX])]) ++m4_ifndef([_LT_PROG_LTMAIN], [AC_DEFUN([_LT_PROG_LTMAIN])]) ++m4_ifndef([_LT_AC_TAGVAR], [AC_DEFUN([_LT_AC_TAGVAR])]) ++m4_ifndef([AC_LTDL_ENABLE_INSTALL], [AC_DEFUN([AC_LTDL_ENABLE_INSTALL])]) ++m4_ifndef([AC_LTDL_PREOPEN], [AC_DEFUN([AC_LTDL_PREOPEN])]) ++m4_ifndef([_LT_AC_SYS_COMPILER], [AC_DEFUN([_LT_AC_SYS_COMPILER])]) ++m4_ifndef([_LT_AC_LOCK], [AC_DEFUN([_LT_AC_LOCK])]) ++m4_ifndef([AC_LIBTOOL_SYS_OLD_ARCHIVE], [AC_DEFUN([AC_LIBTOOL_SYS_OLD_ARCHIVE])]) ++m4_ifndef([_LT_AC_TRY_DLOPEN_SELF], [AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF])]) ++m4_ifndef([AC_LIBTOOL_PROG_CC_C_O], [AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O])]) ++m4_ifndef([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], [AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS])]) ++m4_ifndef([AC_LIBTOOL_OBJDIR], [AC_DEFUN([AC_LIBTOOL_OBJDIR])]) ++m4_ifndef([AC_LTDL_OBJDIR], [AC_DEFUN([AC_LTDL_OBJDIR])]) ++m4_ifndef([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], [AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH])]) ++m4_ifndef([AC_LIBTOOL_SYS_LIB_STRIP], [AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP])]) ++m4_ifndef([AC_PATH_MAGIC], [AC_DEFUN([AC_PATH_MAGIC])]) ++m4_ifndef([AC_PROG_LD_GNU], [AC_DEFUN([AC_PROG_LD_GNU])]) ++m4_ifndef([AC_PROG_LD_RELOAD_FLAG], [AC_DEFUN([AC_PROG_LD_RELOAD_FLAG])]) ++m4_ifndef([AC_DEPLIBS_CHECK_METHOD], [AC_DEFUN([AC_DEPLIBS_CHECK_METHOD])]) ++m4_ifndef([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI])]) ++m4_ifndef([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], [AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])]) ++m4_ifndef([AC_LIBTOOL_PROG_COMPILER_PIC], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC])]) ++m4_ifndef([AC_LIBTOOL_PROG_LD_SHLIBS], [AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS])]) ++m4_ifndef([AC_LIBTOOL_POSTDEP_PREDEP], [AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP])]) ++m4_ifndef([LT_AC_PROG_EGREP], [AC_DEFUN([LT_AC_PROG_EGREP])]) ++m4_ifndef([LT_AC_PROG_SED], [AC_DEFUN([LT_AC_PROG_SED])]) ++m4_ifndef([_LT_CC_BASENAME], [AC_DEFUN([_LT_CC_BASENAME])]) ++m4_ifndef([_LT_COMPILER_BOILERPLATE], [AC_DEFUN([_LT_COMPILER_BOILERPLATE])]) ++m4_ifndef([_LT_LINKER_BOILERPLATE], [AC_DEFUN([_LT_LINKER_BOILERPLATE])]) ++m4_ifndef([_AC_PROG_LIBTOOL], [AC_DEFUN([_AC_PROG_LIBTOOL])]) ++m4_ifndef([AC_LIBTOOL_SETUP], [AC_DEFUN([AC_LIBTOOL_SETUP])]) ++m4_ifndef([_LT_AC_CHECK_DLFCN], [AC_DEFUN([_LT_AC_CHECK_DLFCN])]) ++m4_ifndef([AC_LIBTOOL_SYS_DYNAMIC_LINKER], [AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER])]) ++m4_ifndef([_LT_AC_TAGCONFIG], [AC_DEFUN([_LT_AC_TAGCONFIG])]) ++m4_ifndef([AC_DISABLE_FAST_INSTALL], [AC_DEFUN([AC_DISABLE_FAST_INSTALL])]) ++m4_ifndef([_LT_AC_LANG_CXX], [AC_DEFUN([_LT_AC_LANG_CXX])]) ++m4_ifndef([_LT_AC_LANG_F77], [AC_DEFUN([_LT_AC_LANG_F77])]) ++m4_ifndef([_LT_AC_LANG_GCJ], [AC_DEFUN([_LT_AC_LANG_GCJ])]) ++m4_ifndef([AC_LIBTOOL_RC], [AC_DEFUN([AC_LIBTOOL_RC])]) ++m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])]) ++m4_ifndef([_LT_AC_LANG_C_CONFIG], [AC_DEFUN([_LT_AC_LANG_C_CONFIG])]) ++m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])]) ++m4_ifndef([_LT_AC_LANG_CXX_CONFIG], [AC_DEFUN([_LT_AC_LANG_CXX_CONFIG])]) ++m4_ifndef([AC_LIBTOOL_LANG_F77_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG])]) ++m4_ifndef([_LT_AC_LANG_F77_CONFIG], [AC_DEFUN([_LT_AC_LANG_F77_CONFIG])]) ++m4_ifndef([AC_LIBTOOL_LANG_GCJ_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG])]) ++m4_ifndef([_LT_AC_LANG_GCJ_CONFIG], [AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG])]) ++m4_ifndef([AC_LIBTOOL_LANG_RC_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG])]) ++m4_ifndef([_LT_AC_LANG_RC_CONFIG], [AC_DEFUN([_LT_AC_LANG_RC_CONFIG])]) ++m4_ifndef([AC_LIBTOOL_CONFIG], [AC_DEFUN([AC_LIBTOOL_CONFIG])]) ++m4_ifndef([_LT_AC_FILE_LTDLL_C], [AC_DEFUN([_LT_AC_FILE_LTDLL_C])]) ++ ++# nls.m4 serial 3 (gettext-0.15) ++dnl Copyright (C) 1995-2003, 2005-2006 Free Software Foundation, Inc. ++dnl This file is free software; the Free Software Foundation ++dnl gives unlimited permission to copy and/or distribute it, ++dnl with or without modifications, as long as this notice is preserved. ++dnl ++dnl This file can can be used in projects which are not available under ++dnl the GNU General Public License or the GNU Library General Public ++dnl License but which still want to provide support for the GNU gettext ++dnl functionality. ++dnl Please note that the actual code of the GNU gettext library is covered ++dnl by the GNU Library General Public License, and the rest of the GNU ++dnl gettext package package is covered by the GNU General Public License. ++dnl They are *not* in the public domain. ++ ++dnl Authors: ++dnl Ulrich Drepper , 1995-2000. ++dnl Bruno Haible , 2000-2003. + +- if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' +- # If the export-symbols file already is a .def file (1st line +- # is EXPORTS), use it as is; otherwise, prepend... +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then +- cp $export_symbols $output_objdir/$soname.def; +- else +- echo EXPORTS > $output_objdir/$soname.def; +- cat $export_symbols >> $output_objdir/$soname.def; +- fi~ +- $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' +- else +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- fi +- ;; ++AC_PREREQ(2.50) + +- interix[[3-9]]*) +- _LT_AC_TAGVAR(hardcode_direct, $1)=no +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' +- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' +- # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. +- # Instead, shared libraries are loaded at an image base (0x10000000 by +- # default) and relocated if they conflict, which is a slow very memory +- # consuming and fragmenting process. To avoid this, we pick a random, +- # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link +- # time. Moving up from 0x10000000 also allows more sbrk(2) space. +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' +- ;; ++AC_DEFUN([AM_NLS], ++[ ++ AC_MSG_CHECKING([whether NLS is requested]) ++ dnl Default is enabled NLS ++ AC_ARG_ENABLE(nls, ++ [ --disable-nls do not use Native Language Support], ++ USE_NLS=$enableval, USE_NLS=yes) ++ AC_MSG_RESULT($USE_NLS) ++ AC_SUBST(USE_NLS) ++]) + +- gnu* | linux* | k*bsd*-gnu) +- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then +- tmp_addflag= +- case $cc_basename,$host_cpu in +- pgcc*) # Portland Group C compiler +- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' +- tmp_addflag=' $pic_flag' +- ;; +- pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers +- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' +- tmp_addflag=' $pic_flag -Mnomain' ;; +- ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 +- tmp_addflag=' -i_dynamic' ;; +- efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 +- tmp_addflag=' -i_dynamic -nofor_main' ;; +- ifc* | ifort*) # Intel Fortran compiler +- tmp_addflag=' -nofor_main' ;; +- esac +- case `$CC -V 2>&1 | sed 5q` in +- *Sun\ C*) # Sun C 5.9 +- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' +- tmp_sharedflag='-G' ;; +- *Sun\ F*) # Sun Fortran 8.3 +- tmp_sharedflag='-G' ;; +- *) +- tmp_sharedflag='-shared' ;; +- esac +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++# pkg.m4 - Macros to locate and utilise pkg-config. -*- Autoconf -*- ++# ++# Copyright © 2004 Scott James Remnant . ++# ++# This program is free software; you can redistribute it and/or modify ++# it under the terms of the GNU General Public License as published by ++# the Free Software Foundation; either version 2 of the License, or ++# (at your option) any later version. ++# ++# This program is distributed in the hope that it will be useful, but ++# WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++# General Public License for more details. ++# ++# You should have received a copy of the GNU General Public License ++# along with this program; if not, write to the Free Software ++# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. ++# ++# As a special exception to the GNU General Public License, if you ++# distribute this file as part of a program that contains a ++# configuration script generated by Autoconf, you may include it under ++# the same distribution terms that you use for the rest of that program. + +- if test $supports_anon_versioning = yes; then +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $output_objdir/$libname.ver~ +- cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ +- $echo "local: *; };" >> $output_objdir/$libname.ver~ +- $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' ++# PKG_PROG_PKG_CONFIG([MIN-VERSION]) ++# ---------------------------------- ++AC_DEFUN([PKG_PROG_PKG_CONFIG], ++[m4_pattern_forbid([^_?PKG_[A-Z_]+$]) ++m4_pattern_allow([^PKG_CONFIG(_PATH)?$]) ++AC_ARG_VAR([PKG_CONFIG], [path to pkg-config utility])dnl ++if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then ++ AC_PATH_TOOL([PKG_CONFIG], [pkg-config]) ++fi ++if test -n "$PKG_CONFIG"; then ++ _pkg_min_version=m4_default([$1], [0.9.0]) ++ AC_MSG_CHECKING([pkg-config is at least version $_pkg_min_version]) ++ if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then ++ AC_MSG_RESULT([yes]) ++ else ++ AC_MSG_RESULT([no]) ++ PKG_CONFIG="" + fi +- else +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- fi +- ;; +- +- netbsd*) +- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' +- wlarc= +- else +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' +- fi +- ;; ++ ++fi[]dnl ++])# PKG_PROG_PKG_CONFIG + +- solaris*) +- if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- cat <&2 ++# PKG_CHECK_EXISTS(MODULES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) ++# ++# Check to see whether a particular set of modules exists. Similar ++# to PKG_CHECK_MODULES(), but does not set variables or print errors. ++# ++# ++# Similar to PKG_CHECK_MODULES, make sure that the first instance of ++# this or PKG_CHECK_MODULES is called, or make sure to call ++# PKG_CHECK_EXISTS manually ++# -------------------------------------------------------------- ++AC_DEFUN([PKG_CHECK_EXISTS], ++[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl ++if test -n "$PKG_CONFIG" && \ ++ AC_RUN_LOG([$PKG_CONFIG --exists --print-errors "$1"]); then ++ m4_ifval([$2], [$2], [:]) ++m4_ifvaln([$3], [else ++ $3])dnl ++fi]) + +-*** Warning: The releases 2.8.* of the GNU linker cannot reliably +-*** create shared libraries on Solaris systems. Therefore, libtool +-*** is disabling shared libraries support. We urge you to upgrade GNU +-*** binutils to release 2.9.1 or newer. Another option is to modify +-*** your PATH or compiler configuration so that the native linker is +-*** used, and then restart. + +-EOF +- elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' +- else +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- fi +- ;; ++# _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES]) ++# --------------------------------------------- ++m4_define([_PKG_CONFIG], ++[if test -n "$PKG_CONFIG"; then ++ if test -n "$$1"; then ++ pkg_cv_[]$1="$$1" ++ else ++ PKG_CHECK_EXISTS([$3], ++ [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null`], ++ [pkg_failed=yes]) ++ fi ++else ++ pkg_failed=untried ++fi[]dnl ++])# _PKG_CONFIG + +- sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) +- case `$LD -v 2>&1` in +- *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*) +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- cat <<_LT_EOF 1>&2 ++# _PKG_SHORT_ERRORS_SUPPORTED ++# ----------------------------- ++AC_DEFUN([_PKG_SHORT_ERRORS_SUPPORTED], ++[AC_REQUIRE([PKG_PROG_PKG_CONFIG]) ++if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then ++ _pkg_short_errors_supported=yes ++else ++ _pkg_short_errors_supported=no ++fi[]dnl ++])# _PKG_SHORT_ERRORS_SUPPORTED + +-*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not +-*** reliably create shared libraries on SCO systems. Therefore, libtool +-*** is disabling shared libraries support. We urge you to upgrade GNU +-*** binutils to release 2.16.91.0.3 or newer. Another option is to modify +-*** your PATH or compiler configuration so that the native linker is +-*** used, and then restart. + +-_LT_EOF +- ;; +- *) +- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`' +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib' +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib' +- else +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- fi +- ;; +- esac +- ;; ++# PKG_CHECK_MODULES(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND], ++# [ACTION-IF-NOT-FOUND]) ++# ++# ++# Note that if there is a possibility the first call to ++# PKG_CHECK_MODULES might not happen, you should be sure to include an ++# explicit call to PKG_PROG_PKG_CONFIG in your configure.ac ++# ++# ++# -------------------------------------------------------------- ++AC_DEFUN([PKG_CHECK_MODULES], ++[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl ++AC_ARG_VAR([$1][_CFLAGS], [C compiler flags for $1, overriding pkg-config])dnl ++AC_ARG_VAR([$1][_LIBS], [linker flags for $1, overriding pkg-config])dnl + +- sunos4*) +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' +- wlarc= +- _LT_AC_TAGVAR(hardcode_direct, $1)=yes +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- ;; ++pkg_failed=no ++AC_MSG_CHECKING([for $1]) + +- *) +- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' +- else +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- fi +- ;; +- esac ++_PKG_CONFIG([$1][_CFLAGS], [cflags], [$2]) ++_PKG_CONFIG([$1][_LIBS], [libs], [$2]) + +- if test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no; then +- runpath_var= +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= +- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)= +- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= +- fi +- else +- # PORTME fill in a description of your system's linker (not GNU ld) +- case $host_os in +- aix3*) +- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported +- _LT_AC_TAGVAR(always_export_symbols, $1)=yes +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' +- # Note: this linker hardcodes the directories in LIBPATH if there +- # are no directories specified by -L. +- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes +- if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then +- # Neither direct hardcoding nor static linking is supported with a +- # broken collect2. +- _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported +- fi +- ;; ++m4_define([_PKG_TEXT], [Alternatively, you may set the environment variables $1[]_CFLAGS ++and $1[]_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details.]) + +- aix[[4-9]]*) +- if test "$host_cpu" = ia64; then +- # On IA64, the linker does run time linking by default, so we don't +- # have to do anything special. +- aix_use_runtimelinking=no +- exp_sym_flag='-Bexport' +- no_entry_flag="" +- else +- # If we're using GNU nm, then we don't want the "-C" option. +- # -C means demangle to AIX nm, but means don't demangle with GNU nm +- if $NM -V 2>&1 | grep 'GNU' > /dev/null; then +- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' +- else +- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' +- fi +- aix_use_runtimelinking=no ++if test $pkg_failed = yes; then ++ _PKG_SHORT_ERRORS_SUPPORTED ++ if test $_pkg_short_errors_supported = yes; then ++ $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "$2"` ++ else ++ $1[]_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "$2"` ++ fi ++ # Put the nasty error message in config.log where it belongs ++ echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD + +- # Test if we are trying to use run time linking or normal +- # AIX style linking. If -brtl is somewhere in LDFLAGS, we +- # need to do runtime linking. +- case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) +- for ld_flag in $LDFLAGS; do +- if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then +- aix_use_runtimelinking=yes +- break +- fi +- done +- ;; +- esac ++ ifelse([$4], , [AC_MSG_ERROR(dnl ++[Package requirements ($2) were not met: + +- exp_sym_flag='-bexport' +- no_entry_flag='-bnoentry' +- fi ++$$1_PKG_ERRORS + +- # When large executables or shared objects are built, AIX ld can +- # have problems creating the table of contents. If linking a library +- # or program results in "error TOC overflow" add -mminimal-toc to +- # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not +- # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. + +- _LT_AC_TAGVAR(archive_cmds, $1)='' +- _LT_AC_TAGVAR(hardcode_direct, $1)=yes +- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':' +- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes ++_PKG_TEXT ++])], ++ [AC_MSG_RESULT([no]) ++ $4]) ++elif test $pkg_failed = untried; then ++ ifelse([$4], , [AC_MSG_FAILURE(dnl ++[The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. + +- if test "$GCC" = yes; then +- case $host_os in aix4.[[012]]|aix4.[[012]].*) +- # We only want to do this on AIX 4.2 and lower, the check +- # below for broken collect2 doesn't work under 4.3+ +- collect2name=`${CC} -print-prog-name=collect2` +- if test -f "$collect2name" && \ +- strings "$collect2name" | grep resolve_lib_name >/dev/null +- then +- # We have reworked collect2 +- : +- else +- # We have old collect2 +- _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported +- # It fails to find uninstalled libraries when the uninstalled +- # path is not listed in the libpath. Setting hardcode_minus_L +- # to unsupported forces relinking +- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' +- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= +- fi +- ;; +- esac +- shared_flag='-shared' +- if test "$aix_use_runtimelinking" = yes; then +- shared_flag="$shared_flag "'${wl}-G' +- fi +- else +- # not using gcc +- if test "$host_cpu" = ia64; then +- # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release +- # chokes on -Wl,-G. The following line is correct: +- shared_flag='-G' +- else +- if test "$aix_use_runtimelinking" = yes; then +- shared_flag='${wl}-G' +- else +- shared_flag='${wl}-bM:SRE' +- fi +- fi +- fi ++_PKG_TEXT + +- # It seems that -bexpall does not export symbols beginning with +- # underscore (_), so it is better to generate a list of symbols to export. +- _LT_AC_TAGVAR(always_export_symbols, $1)=yes +- if test "$aix_use_runtimelinking" = yes; then +- # Warning - without using the other runtime loading flags (-brtl), +- # -berok will link without error, but may produce a broken library. +- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok' +- # Determine the default libpath from the value encoded in an empty executable. +- _LT_AC_SYS_LIBPATH_AIX +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" +- else +- if test "$host_cpu" = ia64; then +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' +- _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs" +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" +- else +- # Determine the default libpath from the value encoded in an empty executable. +- _LT_AC_SYS_LIBPATH_AIX +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" +- # Warning - without using the other run time loading flags, +- # -berok will link without error, but may produce a broken library. +- _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' +- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' +- # Exported symbols can be pulled into shared objects from archives +- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='$convenience' +- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes +- # This is similar to how AIX traditionally builds its shared libraries. +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' +- fi +- fi +- ;; ++To get pkg-config, see .])], ++ [$4]) ++else ++ $1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS ++ $1[]_LIBS=$pkg_cv_[]$1[]_LIBS ++ AC_MSG_RESULT([yes]) ++ ifelse([$3], , :, [$3]) ++fi[]dnl ++])# PKG_CHECK_MODULES + +- amigaos*) +- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' +- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes +- # see comment about different semantics on the GNU ld section +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- ;; ++# Copyright (C) 2002, 2003, 2005, 2006, 2007 Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. + +- bsdi[[45]]*) +- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic +- ;; ++# AM_AUTOMAKE_VERSION(VERSION) ++# ---------------------------- ++# Automake X.Y traces this macro to ensure aclocal.m4 has been ++# generated from the m4 files accompanying Automake X.Y. ++# (This private macro should not be called outside this file.) ++AC_DEFUN([AM_AUTOMAKE_VERSION], ++[am__api_version='1.10' ++dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to ++dnl require some minimum version. Point them to the right macro. ++m4_if([$1], [1.10.1], [], ++ [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl ++]) + +- cygwin* | mingw* | pw32*) +- # When not using gcc, we currently assume that we are using +- # Microsoft Visual C++. +- # hardcode_libdir_flag_spec is actually meaningless, as there is +- # no search path for DLLs. +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' +- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported +- # Tell ltmain to make .lib files, not .a files. +- libext=lib +- # Tell ltmain to make .dll files, not .so files. +- shrext_cmds=".dll" +- # FIXME: Setting linknames here is a bad hack. +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames=' +- # The linker will automatically build a .lib file if we build a DLL. +- _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='true' +- # FIXME: Should let the user specify the lib program. +- _LT_AC_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs' +- _LT_AC_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`' +- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes +- ;; ++# _AM_AUTOCONF_VERSION(VERSION) ++# ----------------------------- ++# aclocal traces this macro to find the Autoconf version. ++# This is a private macro too. Using m4_define simplifies ++# the logic in aclocal, which can simply ignore this definition. ++m4_define([_AM_AUTOCONF_VERSION], []) + +- darwin* | rhapsody*) +- case $host_os in +- rhapsody* | darwin1.[[012]]) +- _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}suppress' +- ;; +- *) # Darwin 1.3 on +- if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then +- _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' +- else +- case ${MACOSX_DEPLOYMENT_TARGET} in +- 10.[[012]]) +- _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' +- ;; +- 10.*) +- _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}dynamic_lookup' +- ;; +- esac +- fi +- ;; +- esac +- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no +- _LT_AC_TAGVAR(hardcode_direct, $1)=no +- _LT_AC_TAGVAR(hardcode_automatic, $1)=yes +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported +- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='' +- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes +- if test "$GCC" = yes ; then +- output_verbose_link_cmd='echo' +- _LT_AC_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" +- _LT_AC_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" +- _LT_AC_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" +- else +- case $cc_basename in +- xlc*) +- output_verbose_link_cmd='echo' +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring' +- _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' +- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' +- _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' +- ;; +- *) +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- ;; +- esac +- fi +- ;; ++# AM_SET_CURRENT_AUTOMAKE_VERSION ++# ------------------------------- ++# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced. ++# This function is AC_REQUIREd by AC_INIT_AUTOMAKE. ++AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], ++[AM_AUTOMAKE_VERSION([1.10.1])dnl ++m4_ifndef([AC_AUTOCONF_VERSION], ++ [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl ++_AM_AUTOCONF_VERSION(AC_AUTOCONF_VERSION)]) + +- dgux*) +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- ;; ++# AM_AUX_DIR_EXPAND -*- Autoconf -*- + +- freebsd1*) +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- ;; ++# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. + +- # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor +- # support. Future versions do this automatically, but an explicit c++rt0.o +- # does not break anything, and helps significantly (at the cost of a little +- # extra space). +- freebsd2.2*) +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' +- _LT_AC_TAGVAR(hardcode_direct, $1)=yes +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- ;; ++# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets ++# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to ++# `$srcdir', `$srcdir/..', or `$srcdir/../..'. ++# ++# Of course, Automake must honor this variable whenever it calls a ++# tool from the auxiliary directory. The problem is that $srcdir (and ++# therefore $ac_aux_dir as well) can be either absolute or relative, ++# depending on how configure is run. This is pretty annoying, since ++# it makes $ac_aux_dir quite unusable in subdirectories: in the top ++# source directory, any form will work fine, but in subdirectories a ++# relative path needs to be adjusted first. ++# ++# $ac_aux_dir/missing ++# fails when called from a subdirectory if $ac_aux_dir is relative ++# $top_srcdir/$ac_aux_dir/missing ++# fails if $ac_aux_dir is absolute, ++# fails when called from a subdirectory in a VPATH build with ++# a relative $ac_aux_dir ++# ++# The reason of the latter failure is that $top_srcdir and $ac_aux_dir ++# are both prefixed by $srcdir. In an in-source build this is usually ++# harmless because $srcdir is `.', but things will broke when you ++# start a VPATH build or use an absolute $srcdir. ++# ++# So we could use something similar to $top_srcdir/$ac_aux_dir/missing, ++# iff we strip the leading $srcdir from $ac_aux_dir. That would be: ++# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` ++# and then we would define $MISSING as ++# MISSING="\${SHELL} $am_aux_dir/missing" ++# This will work as long as MISSING is not called from configure, because ++# unfortunately $(top_srcdir) has no meaning in configure. ++# However there are other variables, like CC, which are often used in ++# configure, and could therefore not use this "fixed" $ac_aux_dir. ++# ++# Another solution, used here, is to always expand $ac_aux_dir to an ++# absolute PATH. The drawback is that using absolute paths prevent a ++# configured tree to be moved without reconfiguration. + +- # Unfortunately, older versions of FreeBSD 2 do not have this feature. +- freebsd2*) +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' +- _LT_AC_TAGVAR(hardcode_direct, $1)=yes +- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- ;; ++AC_DEFUN([AM_AUX_DIR_EXPAND], ++[dnl Rely on autoconf to set up CDPATH properly. ++AC_PREREQ([2.50])dnl ++# expand $ac_aux_dir to an absolute path ++am_aux_dir=`cd $ac_aux_dir && pwd` ++]) + +- # FreeBSD 3 and greater uses gcc -shared to do shared libraries. +- freebsd* | dragonfly*) +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' +- _LT_AC_TAGVAR(hardcode_direct, $1)=yes +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- ;; ++# AM_CONDITIONAL -*- Autoconf -*- + +- hpux9*) +- if test "$GCC" = yes; then +- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' +- else +- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' +- fi +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' +- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: +- _LT_AC_TAGVAR(hardcode_direct, $1)=yes ++# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006 ++# Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. + +- # hardcode_minus_L: Not really in the search PATH, +- # but as the default location of the library. +- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes +- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' +- ;; ++# serial 8 + +- hpux10*) +- if test "$GCC" = yes -a "$with_gnu_ld" = no; then +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' +- else +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' +- fi +- if test "$with_gnu_ld" = no; then +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' +- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: ++# AM_CONDITIONAL(NAME, SHELL-CONDITION) ++# ------------------------------------- ++# Define a conditional. ++AC_DEFUN([AM_CONDITIONAL], ++[AC_PREREQ(2.52)dnl ++ ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], ++ [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl ++AC_SUBST([$1_TRUE])dnl ++AC_SUBST([$1_FALSE])dnl ++_AM_SUBST_NOTMAKE([$1_TRUE])dnl ++_AM_SUBST_NOTMAKE([$1_FALSE])dnl ++if $2; then ++ $1_TRUE= ++ $1_FALSE='#' ++else ++ $1_TRUE='#' ++ $1_FALSE= ++fi ++AC_CONFIG_COMMANDS_PRE( ++[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then ++ AC_MSG_ERROR([[conditional "$1" was never defined. ++Usually this means the macro was only invoked conditionally.]]) ++fi])]) + +- _LT_AC_TAGVAR(hardcode_direct, $1)=yes +- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ++# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006 ++# Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. + +- # hardcode_minus_L: Not really in the search PATH, +- # but as the default location of the library. +- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes +- fi +- ;; ++# serial 9 + +- hpux11*) +- if test "$GCC" = yes -a "$with_gnu_ld" = no; then +- case $host_cpu in +- hppa*64*) +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' +- ;; +- ia64*) +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' +- ;; +- *) +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' +- ;; +- esac +- else +- case $host_cpu in +- hppa*64*) +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' +- ;; +- ia64*) +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' +- ;; +- *) +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' +- ;; +- esac +- fi +- if test "$with_gnu_ld" = no; then +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' +- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: ++# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be ++# written in clear, in which case automake, when reading aclocal.m4, ++# will think it sees a *use*, and therefore will trigger all it's ++# C support machinery. Also note that it means that autoscan, seeing ++# CC etc. in the Makefile, will ask for an AC_PROG_CC use... + +- case $host_cpu in +- hppa*64*|ia64*) +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir' +- _LT_AC_TAGVAR(hardcode_direct, $1)=no +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- ;; +- *) +- _LT_AC_TAGVAR(hardcode_direct, $1)=yes +- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + +- # hardcode_minus_L: Not really in the search PATH, +- # but as the default location of the library. +- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes +- ;; +- esac +- fi +- ;; ++# _AM_DEPENDENCIES(NAME) ++# ---------------------- ++# See how the compiler implements dependency checking. ++# NAME is "CC", "CXX", "GCJ", or "OBJC". ++# We try a few techniques and use that to set a single cache variable. ++# ++# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was ++# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular ++# dependency, and given that the user is not expected to run this macro, ++# just rely on AC_PROG_CC. ++AC_DEFUN([_AM_DEPENDENCIES], ++[AC_REQUIRE([AM_SET_DEPDIR])dnl ++AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl ++AC_REQUIRE([AM_MAKE_INCLUDE])dnl ++AC_REQUIRE([AM_DEP_TRACK])dnl + +- irix5* | irix6* | nonstopux*) +- if test "$GCC" = yes; then +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' +- else +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir' +- fi +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' +- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: +- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes +- ;; ++ifelse([$1], CC, [depcc="$CC" am_compiler_list=], ++ [$1], CXX, [depcc="$CXX" am_compiler_list=], ++ [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'], ++ [$1], UPC, [depcc="$UPC" am_compiler_list=], ++ [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'], ++ [depcc="$$1" am_compiler_list=]) + +- netbsd*) +- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out +- else +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF +- fi +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' +- _LT_AC_TAGVAR(hardcode_direct, $1)=yes +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- ;; ++AC_CACHE_CHECK([dependency style of $depcc], ++ [am_cv_$1_dependencies_compiler_type], ++[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then ++ # We make a subdir and do the tests there. Otherwise we can end up ++ # making bogus files that we don't know about and never remove. For ++ # instance it was reported that on HP-UX the gcc test will end up ++ # making a dummy file named `D' -- because `-MD' means `put the output ++ # in D'. ++ mkdir conftest.dir ++ # Copy depcomp to subdir because otherwise we won't find it if we're ++ # using a relative directory. ++ cp "$am_depcomp" conftest.dir ++ cd conftest.dir ++ # We will build objects and dependencies in a subdirectory because ++ # it helps to detect inapplicable dependency modes. For instance ++ # both Tru64's cc and ICC support -MD to output dependencies as a ++ # side effect of compilation, but ICC will put the dependencies in ++ # the current directory while Tru64 will put them in the object ++ # directory. ++ mkdir sub + +- newsos6) +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- _LT_AC_TAGVAR(hardcode_direct, $1)=yes +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' +- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- ;; ++ am_cv_$1_dependencies_compiler_type=none ++ if test "$am_compiler_list" = ""; then ++ am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` ++ fi ++ for depmode in $am_compiler_list; do ++ # Setup a source with many dependencies, because some compilers ++ # like to wrap large dependency lists on column 80 (with \), and ++ # we should not choose a depcomp mode which is confused by this. ++ # ++ # We need to recreate these files for each test, as the compiler may ++ # overwrite some of them when testing with obscure command lines. ++ # This happens at least with the AIX C compiler. ++ : > sub/conftest.c ++ for i in 1 2 3 4 5 6; do ++ echo '#include "conftst'$i'.h"' >> sub/conftest.c ++ # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with ++ # Solaris 8's {/usr,}/bin/sh. ++ touch sub/conftst$i.h ++ done ++ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + +- openbsd*) +- if test -f /usr/libexec/ld.so; then +- _LT_AC_TAGVAR(hardcode_direct, $1)=yes +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' +- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' +- else +- case $host_os in +- openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*) +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' +- ;; +- *) +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' +- ;; +- esac +- fi ++ case $depmode in ++ nosideeffect) ++ # after this tag, mechanisms are not by side-effect, so they'll ++ # only be used when explicitly requested ++ if test "x$enable_dependency_tracking" = xyes; then ++ continue + else +- _LT_AC_TAGVAR(ld_shlibs, $1)=no ++ break + fi + ;; ++ none) break ;; ++ esac ++ # We check with `-c' and `-o' for the sake of the "dashmstdout" ++ # mode. It turns out that the SunPro C++ compiler does not properly ++ # handle `-M -o', and we need to detect this. ++ if depmode=$depmode \ ++ source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ ++ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ ++ $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ ++ >/dev/null 2>conftest.err && ++ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && ++ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && ++ grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && ++ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then ++ # icc doesn't choke on unknown options, it will just issue warnings ++ # or remarks (even with -Werror). So we grep stderr for any message ++ # that says an option was ignored or not supported. ++ # When given -MP, icc 7.0 and 7.1 complain thusly: ++ # icc: Command line warning: ignoring option '-M'; no argument required ++ # The diagnosis changed in icc 8.0: ++ # icc: Command line remark: option '-MP' not supported ++ if (grep 'ignoring option' conftest.err || ++ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else ++ am_cv_$1_dependencies_compiler_type=$depmode ++ break ++ fi ++ fi ++ done + +- os2*) +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' +- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes +- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported +- _LT_AC_TAGVAR(archive_cmds, $1)='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' +- _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' +- ;; ++ cd .. ++ rm -rf conftest.dir ++else ++ am_cv_$1_dependencies_compiler_type=none ++fi ++]) ++AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) ++AM_CONDITIONAL([am__fastdep$1], [ ++ test "x$enable_dependency_tracking" != xno \ ++ && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) ++]) + +- osf3*) +- if test "$GCC" = yes; then +- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' +- else +- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' +- fi +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' +- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: +- ;; + +- osf4* | osf5*) # as osf3* with the addition of -msym flag +- if test "$GCC" = yes; then +- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' +- else +- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ +- $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp' ++# AM_SET_DEPDIR ++# ------------- ++# Choose a directory name for dependency files. ++# This macro is AC_REQUIREd in _AM_DEPENDENCIES ++AC_DEFUN([AM_SET_DEPDIR], ++[AC_REQUIRE([AM_SET_LEADING_DOT])dnl ++AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl ++]) + +- # Both c and cxx compiler support -rpath directly +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' +- fi +- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: +- ;; + +- solaris*) +- _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text' +- if test "$GCC" = yes; then +- wlarc='${wl}' +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ +- $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp' +- else +- wlarc='' +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ +- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' +- fi +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- case $host_os in +- solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; +- *) +- # The compiler driver will combine and reorder linker options, +- # but understands `-z linker_flag'. GCC discards it without `$wl', +- # but is careful enough not to reorder. +- # Supported since Solaris 2.6 (maybe 2.5.1?) +- if test "$GCC" = yes; then +- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' +- else +- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' +- fi +- ;; +- esac +- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes +- ;; ++# AM_DEP_TRACK ++# ------------ ++AC_DEFUN([AM_DEP_TRACK], ++[AC_ARG_ENABLE(dependency-tracking, ++[ --disable-dependency-tracking speeds up one-time build ++ --enable-dependency-tracking do not reject slow dependency extractors]) ++if test "x$enable_dependency_tracking" != xno; then ++ am_depcomp="$ac_aux_dir/depcomp" ++ AMDEPBACKSLASH='\' ++fi ++AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) ++AC_SUBST([AMDEPBACKSLASH])dnl ++_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl ++]) + +- sunos4*) +- if test "x$host_vendor" = xsequent; then +- # Use $CC to link under sequent, because it throws in some extra .o +- # files that make .init and .fini sections work. +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' +- else +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' +- fi +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' +- _LT_AC_TAGVAR(hardcode_direct, $1)=yes +- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- ;; ++# Generate code to set up dependency tracking. -*- Autoconf -*- + +- sysv4) +- case $host_vendor in +- sni) +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- _LT_AC_TAGVAR(hardcode_direct, $1)=yes # is this really true??? +- ;; +- siemens) +- ## LD is ld it makes a PLAMLIB +- ## CC just makes a GrossModule. +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags' +- _LT_AC_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs' +- _LT_AC_TAGVAR(hardcode_direct, $1)=no +- ;; +- motorola) +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- _LT_AC_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie +- ;; +- esac +- runpath_var='LD_RUN_PATH' +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- ;; ++# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005 ++# Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. ++ ++#serial 3 ++ ++# _AM_OUTPUT_DEPENDENCY_COMMANDS ++# ------------------------------ ++AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], ++[for mf in $CONFIG_FILES; do ++ # Strip MF so we end up with the name of the file. ++ mf=`echo "$mf" | sed -e 's/:.*$//'` ++ # Check whether this is an Automake generated Makefile or not. ++ # We used to match only the files named `Makefile.in', but ++ # some people rename them; so instead we look at the file content. ++ # Grep'ing the first line is not enough: some people post-process ++ # each Makefile.in and add a new line on top of each file to say so. ++ # Grep'ing the whole file is not good either: AIX grep has a line ++ # limit of 2048, but all sed's we know have understand at least 4000. ++ if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then ++ dirpart=`AS_DIRNAME("$mf")` ++ else ++ continue ++ fi ++ # Extract the definition of DEPDIR, am__include, and am__quote ++ # from the Makefile without running `make'. ++ DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` ++ test -z "$DEPDIR" && continue ++ am__include=`sed -n 's/^am__include = //p' < "$mf"` ++ test -z "am__include" && continue ++ am__quote=`sed -n 's/^am__quote = //p' < "$mf"` ++ # When using ansi2knr, U may be empty or an underscore; expand it ++ U=`sed -n 's/^U = //p' < "$mf"` ++ # Find all dependency output files, they are included files with ++ # $(DEPDIR) in their names. We invoke sed twice because it is the ++ # simplest approach to changing $(DEPDIR) to its actual value in the ++ # expansion. ++ for file in `sed -n " ++ s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ ++ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do ++ # Make sure the directory exists. ++ test -f "$dirpart/$file" && continue ++ fdir=`AS_DIRNAME(["$file"])` ++ AS_MKDIR_P([$dirpart/$fdir]) ++ # echo "creating $dirpart/$file" ++ echo '# dummy' > "$dirpart/$file" ++ done ++done ++])# _AM_OUTPUT_DEPENDENCY_COMMANDS + +- sysv4.3*) +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport' +- ;; + +- sysv4*MP*) +- if test -d /usr/nec; then +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- runpath_var=LD_RUN_PATH +- hardcode_runpath_var=yes +- _LT_AC_TAGVAR(ld_shlibs, $1)=yes +- fi +- ;; ++# AM_OUTPUT_DEPENDENCY_COMMANDS ++# ----------------------------- ++# This macro should only be invoked once -- use via AC_REQUIRE. ++# ++# This code is only required when automatic dependency tracking ++# is enabled. FIXME. This creates each `.P' file that we will ++# need in order to bootstrap the dependency handling code. ++AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], ++[AC_CONFIG_COMMANDS([depfiles], ++ [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], ++ [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) ++]) + +- sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) +- _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' +- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- runpath_var='LD_RUN_PATH' ++# Do all the work for Automake. -*- Autoconf -*- + +- if test "$GCC" = yes; then +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' +- else +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' +- fi +- ;; ++# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, ++# 2005, 2006, 2008 Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. + +- sysv5* | sco3.2v5* | sco5v6*) +- # Note: We can NOT use -z defs as we might desire, because we do not +- # link with -lc, and that would cause any symbols used from libc to +- # always be unresolved, which means just about no library would +- # ever link correctly. If we're not using GNU ld we use -z text +- # though, which does catch some bad symbols but isn't as heavy-handed +- # as -z defs. +- _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' +- _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' +- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' +- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':' +- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes +- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' +- runpath_var='LD_RUN_PATH' ++# serial 13 + +- if test "$GCC" = yes; then +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' +- else +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' +- fi +- ;; ++# This macro actually does too much. Some checks are only needed if ++# your package does certain things. But this isn't really a big deal. + +- uts4*) +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- ;; ++# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) ++# AM_INIT_AUTOMAKE([OPTIONS]) ++# ----------------------------------------------- ++# The call with PACKAGE and VERSION arguments is the old style ++# call (pre autoconf-2.50), which is being phased out. PACKAGE ++# and VERSION should now be passed to AC_INIT and removed from ++# the call to AM_INIT_AUTOMAKE. ++# We support both call styles for the transition. After ++# the next Automake release, Autoconf can make the AC_INIT ++# arguments mandatory, and then we can depend on a new Autoconf ++# release and drop the old call support. ++AC_DEFUN([AM_INIT_AUTOMAKE], ++[AC_PREREQ([2.60])dnl ++dnl Autoconf wants to disallow AM_ names. We explicitly allow ++dnl the ones we care about. ++m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl ++AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl ++AC_REQUIRE([AC_PROG_INSTALL])dnl ++if test "`cd $srcdir && pwd`" != "`pwd`"; then ++ # Use -I$(srcdir) only when $(srcdir) != ., so that make's output ++ # is not polluted with repeated "-I." ++ AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl ++ # test to see if srcdir already configured ++ if test -f $srcdir/config.status; then ++ AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) ++ fi ++fi + +- *) +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- ;; +- esac ++# test whether we have cygpath ++if test -z "$CYGPATH_W"; then ++ if (cygpath --version) >/dev/null 2>/dev/null; then ++ CYGPATH_W='cygpath -w' ++ else ++ CYGPATH_W=echo + fi ++fi ++AC_SUBST([CYGPATH_W]) ++ ++# Define the identity of the package. ++dnl Distinguish between old-style and new-style calls. ++m4_ifval([$2], ++[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl ++ AC_SUBST([PACKAGE], [$1])dnl ++ AC_SUBST([VERSION], [$2])], ++[_AM_SET_OPTIONS([$1])dnl ++dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT. ++m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,, ++ [m4_fatal([AC_INIT should be called with package and version arguments])])dnl ++ AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl ++ AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl ++ ++_AM_IF_OPTION([no-define],, ++[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) ++ AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl ++ ++# Some tools Automake needs. ++AC_REQUIRE([AM_SANITY_CHECK])dnl ++AC_REQUIRE([AC_ARG_PROGRAM])dnl ++AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}) ++AM_MISSING_PROG(AUTOCONF, autoconf) ++AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) ++AM_MISSING_PROG(AUTOHEADER, autoheader) ++AM_MISSING_PROG(MAKEINFO, makeinfo) ++AM_PROG_INSTALL_SH ++AM_PROG_INSTALL_STRIP ++AC_REQUIRE([AM_PROG_MKDIR_P])dnl ++# We need awk for the "check" target. The system "awk" is bad on ++# some platforms. ++AC_REQUIRE([AC_PROG_AWK])dnl ++AC_REQUIRE([AC_PROG_MAKE_SET])dnl ++AC_REQUIRE([AM_SET_LEADING_DOT])dnl ++_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], ++ [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], ++ [_AM_PROG_TAR([v7])])]) ++_AM_IF_OPTION([no-dependencies],, ++[AC_PROVIDE_IFELSE([AC_PROG_CC], ++ [_AM_DEPENDENCIES(CC)], ++ [define([AC_PROG_CC], ++ defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl ++AC_PROVIDE_IFELSE([AC_PROG_CXX], ++ [_AM_DEPENDENCIES(CXX)], ++ [define([AC_PROG_CXX], ++ defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl ++AC_PROVIDE_IFELSE([AC_PROG_OBJC], ++ [_AM_DEPENDENCIES(OBJC)], ++ [define([AC_PROG_OBJC], ++ defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl + ]) +-AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)]) +-test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no ++]) ++ ++ ++# When config.status generates a header, we must update the stamp-h file. ++# This file resides in the same directory as the config header ++# that is generated. The stamp files are numbered to have different names. ++ ++# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the ++# loop where config.status creates the headers, so we can generate ++# our stamp files there. ++AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], ++[# Compute $1's index in $config_headers. ++_am_arg=$1 ++_am_stamp_count=1 ++for _am_header in $config_headers :; do ++ case $_am_header in ++ $_am_arg | $_am_arg:* ) ++ break ;; ++ * ) ++ _am_stamp_count=`expr $_am_stamp_count + 1` ;; ++ esac ++done ++echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) + ++# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. + # +-# Do we need to explicitly link libc? ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. ++ ++# AM_PROG_INSTALL_SH ++# ------------------ ++# Define $install_sh. ++AC_DEFUN([AM_PROG_INSTALL_SH], ++[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl ++install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"} ++AC_SUBST(install_sh)]) ++ ++# Copyright (C) 2003, 2005 Free Software Foundation, Inc. + # +-case "x$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)" in +-x|xyes) +- # Assume -lc should be added +- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. + +- if test "$enable_shared" = yes && test "$GCC" = yes; then +- case $_LT_AC_TAGVAR(archive_cmds, $1) in +- *'~'*) +- # FIXME: we may have to deal with multi-command sequences. +- ;; +- '$CC '*) +- # Test whether the compiler implicitly links with -lc since on some +- # systems, -lgcc has to come before -lc. If gcc already passes -lc +- # to ld, don't add -lc before -lgcc. +- AC_MSG_CHECKING([whether -lc should be explicitly linked in]) +- $rm conftest* +- echo "$lt_simple_compile_test_code" > conftest.$ac_ext ++# serial 2 + +- if AC_TRY_EVAL(ac_compile) 2>conftest.err; then +- soname=conftest +- lib=conftest +- libobjs=conftest.$ac_objext +- deplibs= +- wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) +- pic_flag=$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) +- compiler_flags=-v +- linker_flags=-v +- verstring= +- output_objdir=. +- libname=conftest +- lt_save_allow_undefined_flag=$_LT_AC_TAGVAR(allow_undefined_flag, $1) +- _LT_AC_TAGVAR(allow_undefined_flag, $1)= +- if AC_TRY_EVAL(_LT_AC_TAGVAR(archive_cmds, $1) 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) +- then +- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no +- else +- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes +- fi +- _LT_AC_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag +- else +- cat conftest.err 1>&5 +- fi +- $rm conftest* +- AC_MSG_RESULT([$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)]) +- ;; +- esac +- fi +- ;; +-esac +-])# AC_LIBTOOL_PROG_LD_SHLIBS ++# Check whether the underlying file-system supports filenames ++# with a leading dot. For instance MS-DOS doesn't. ++AC_DEFUN([AM_SET_LEADING_DOT], ++[rm -rf .tst 2>/dev/null ++mkdir .tst 2>/dev/null ++if test -d .tst; then ++ am__leading_dot=. ++else ++ am__leading_dot=_ ++fi ++rmdir .tst 2>/dev/null ++AC_SUBST([am__leading_dot])]) + ++# Add --enable-maintainer-mode option to configure. -*- Autoconf -*- ++# From Jim Meyering + +-# _LT_AC_FILE_LTDLL_C +-# ------------------- +-# Be careful that the start marker always follows a newline. +-AC_DEFUN([_LT_AC_FILE_LTDLL_C], [ +-# /* ltdll.c starts here */ +-# #define WIN32_LEAN_AND_MEAN +-# #include +-# #undef WIN32_LEAN_AND_MEAN +-# #include +-# +-# #ifndef __CYGWIN__ +-# # ifdef __CYGWIN32__ +-# # define __CYGWIN__ __CYGWIN32__ +-# # endif +-# #endif +-# +-# #ifdef __cplusplus +-# extern "C" { +-# #endif +-# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved); +-# #ifdef __cplusplus +-# } +-# #endif +-# +-# #ifdef __CYGWIN__ +-# #include +-# DECLARE_CYGWIN_DLL( DllMain ); +-# #endif +-# HINSTANCE __hDllInstance_base; +-# +-# BOOL APIENTRY +-# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved) +-# { +-# __hDllInstance_base = hInst; +-# return TRUE; +-# } +-# /* ltdll.c ends here */ +-])# _LT_AC_FILE_LTDLL_C ++# Copyright (C) 1996, 1998, 2000, 2001, 2002, 2003, 2004, 2005 ++# Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. + ++# serial 4 ++ ++AC_DEFUN([AM_MAINTAINER_MODE], ++[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles]) ++ dnl maintainer-mode is disabled by default ++ AC_ARG_ENABLE(maintainer-mode, ++[ --enable-maintainer-mode enable make rules and dependencies not useful ++ (and sometimes confusing) to the casual installer], ++ USE_MAINTAINER_MODE=$enableval, ++ USE_MAINTAINER_MODE=no) ++ AC_MSG_RESULT([$USE_MAINTAINER_MODE]) ++ AM_CONDITIONAL(MAINTAINER_MODE, [test $USE_MAINTAINER_MODE = yes]) ++ MAINT=$MAINTAINER_MODE_TRUE ++ AC_SUBST(MAINT)dnl ++] ++) + +-# _LT_AC_TAGVAR(VARNAME, [TAGNAME]) +-# --------------------------------- +-AC_DEFUN([_LT_AC_TAGVAR], [ifelse([$2], [], [$1], [$1_$2])]) ++AU_DEFUN([jm_MAINTAINER_MODE], [AM_MAINTAINER_MODE]) + ++# Check to see how 'make' treats includes. -*- Autoconf -*- + +-# old names +-AC_DEFUN([AM_PROG_LIBTOOL], [AC_PROG_LIBTOOL]) +-AC_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)]) +-AC_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)]) +-AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)]) +-AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)]) +-AC_DEFUN([AM_PROG_LD], [AC_PROG_LD]) +-AC_DEFUN([AM_PROG_NM], [AC_PROG_NM]) ++# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. + +-# This is just to silence aclocal about the macro not being used +-ifelse([AC_DISABLE_FAST_INSTALL]) ++# serial 3 + +-AC_DEFUN([LT_AC_PROG_GCJ], +-[AC_CHECK_TOOL(GCJ, gcj, no) +- test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2" +- AC_SUBST(GCJFLAGS) ++# AM_MAKE_INCLUDE() ++# ----------------- ++# Check to see how make treats includes. ++AC_DEFUN([AM_MAKE_INCLUDE], ++[am_make=${MAKE-make} ++cat > confinc << 'END' ++am__doit: ++ @echo done ++.PHONY: am__doit ++END ++# If we don't find an include directive, just comment out the code. ++AC_MSG_CHECKING([for style of include used by $am_make]) ++am__include="#" ++am__quote= ++_am_result=none ++# First try GNU make style include. ++echo "include confinc" > confmf ++# We grep out `Entering directory' and `Leaving directory' ++# messages which can occur if `w' ends up in MAKEFLAGS. ++# In particular we don't look at `^make:' because GNU make might ++# be invoked under some other name (usually "gmake"), in which ++# case it prints its new name instead of `make'. ++if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then ++ am__include=include ++ am__quote= ++ _am_result=GNU ++fi ++# Now try BSD make style include. ++if test "$am__include" = "#"; then ++ echo '.include "confinc"' > confmf ++ if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then ++ am__include=.include ++ am__quote="\"" ++ _am_result=BSD ++ fi ++fi ++AC_SUBST([am__include]) ++AC_SUBST([am__quote]) ++AC_MSG_RESULT([$_am_result]) ++rm -f confinc confmf + ]) + +-AC_DEFUN([LT_AC_PROG_RC], +-[AC_CHECK_TOOL(RC, windres, no) +-]) ++# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- + ++# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005 ++# Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. + +-# Cheap backport of AS_EXECUTABLE_P and required macros +-# from Autoconf 2.59; we should not use $as_executable_p directly. ++# serial 5 + +-# _AS_TEST_PREPARE +-# ---------------- +-m4_ifndef([_AS_TEST_PREPARE], +-[m4_defun([_AS_TEST_PREPARE], +-[if test -x / >/dev/null 2>&1; then +- as_executable_p='test -x' ++# AM_MISSING_PROG(NAME, PROGRAM) ++# ------------------------------ ++AC_DEFUN([AM_MISSING_PROG], ++[AC_REQUIRE([AM_MISSING_HAS_RUN]) ++$1=${$1-"${am_missing_run}$2"} ++AC_SUBST($1)]) ++ ++ ++# AM_MISSING_HAS_RUN ++# ------------------ ++# Define MISSING if not defined so far and test if it supports --run. ++# If it does, set am_missing_run to use it, otherwise, to nothing. ++AC_DEFUN([AM_MISSING_HAS_RUN], ++[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl ++AC_REQUIRE_AUX_FILE([missing])dnl ++test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" ++# Use eval to expand $SHELL ++if eval "$MISSING --run true"; then ++ am_missing_run="$MISSING --run " + else +- as_executable_p='test -f' ++ am_missing_run= ++ AC_MSG_WARN([`missing' script is too old or missing]) + fi +-])])# _AS_TEST_PREPARE ++]) + +-# AS_EXECUTABLE_P +-# --------------- +-# Check whether a file is executable. +-m4_ifndef([AS_EXECUTABLE_P], +-[m4_defun([AS_EXECUTABLE_P], +-[AS_REQUIRE([_AS_TEST_PREPARE])dnl +-$as_executable_p $1[]dnl +-])])# AS_EXECUTABLE_P ++# Copyright (C) 2003, 2004, 2005, 2006 Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. + +-# NOTE: This macro has been submitted for inclusion into # +-# GNU Autoconf as AC_PROG_SED. When it is available in # +-# a released version of Autoconf we should remove this # +-# macro and use it instead. # +-# LT_AC_PROG_SED +-# -------------- +-# Check for a fully-functional sed program, that truncates +-# as few characters as possible. Prefer GNU sed if found. +-AC_DEFUN([LT_AC_PROG_SED], +-[AC_MSG_CHECKING([for a sed that does not truncate output]) +-AC_CACHE_VAL(lt_cv_path_SED, +-[# Loop through the user's path and test for sed and gsed. +-# Then use that list of sed's as ones to test for truncation. +-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +-for as_dir in $PATH +-do +- IFS=$as_save_IFS +- test -z "$as_dir" && as_dir=. +- for lt_ac_prog in sed gsed; do +- for ac_exec_ext in '' $ac_executable_extensions; do +- if AS_EXECUTABLE_P(["$as_dir/$lt_ac_prog$ac_exec_ext"]); then +- lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext" +- fi +- done +- done +-done +-IFS=$as_save_IFS +-lt_ac_max=0 +-lt_ac_count=0 +-# Add /usr/xpg4/bin/sed as it is typically found on Solaris +-# along with /bin/sed that truncates output. +-for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do +- test ! -f $lt_ac_sed && continue +- cat /dev/null > conftest.in +- lt_ac_count=0 +- echo $ECHO_N "0123456789$ECHO_C" >conftest.in +- # Check for GNU sed and select it if it is found. +- if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then +- lt_cv_path_SED=$lt_ac_sed +- break +- fi +- while true; do +- cat conftest.in conftest.in >conftest.tmp +- mv conftest.tmp conftest.in +- cp conftest.in conftest.nl +- echo >>conftest.nl +- $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break +- cmp -s conftest.out conftest.nl || break +- # 10000 chars as input seems more than enough +- test $lt_ac_count -gt 10 && break +- lt_ac_count=`expr $lt_ac_count + 1` +- if test $lt_ac_count -gt $lt_ac_max; then +- lt_ac_max=$lt_ac_count +- lt_cv_path_SED=$lt_ac_sed +- fi +- done +-done +-]) +-SED=$lt_cv_path_SED +-AC_SUBST([SED]) +-AC_MSG_RESULT([$SED]) ++# AM_PROG_MKDIR_P ++# --------------- ++# Check for `mkdir -p'. ++AC_DEFUN([AM_PROG_MKDIR_P], ++[AC_PREREQ([2.60])dnl ++AC_REQUIRE([AC_PROG_MKDIR_P])dnl ++dnl Automake 1.8 to 1.9.6 used to define mkdir_p. We now use MKDIR_P, ++dnl while keeping a definition of mkdir_p for backward compatibility. ++dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile. ++dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of ++dnl Makefile.ins that do not define MKDIR_P, so we do our own ++dnl adjustment using top_builddir (which is defined more often than ++dnl MKDIR_P). ++AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl ++case $mkdir_p in ++ [[\\/$]]* | ?:[[\\/]]*) ;; ++ */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; ++esac + ]) + +-# nls.m4 serial 3 (gettext-0.15) +-dnl Copyright (C) 1995-2003, 2005-2006 Free Software Foundation, Inc. +-dnl This file is free software; the Free Software Foundation +-dnl gives unlimited permission to copy and/or distribute it, +-dnl with or without modifications, as long as this notice is preserved. +-dnl +-dnl This file can can be used in projects which are not available under +-dnl the GNU General Public License or the GNU Library General Public +-dnl License but which still want to provide support for the GNU gettext +-dnl functionality. +-dnl Please note that the actual code of the GNU gettext library is covered +-dnl by the GNU Library General Public License, and the rest of the GNU +-dnl gettext package package is covered by the GNU General Public License. +-dnl They are *not* in the public domain. ++# Helper functions for option handling. -*- Autoconf -*- + +-dnl Authors: +-dnl Ulrich Drepper , 1995-2000. +-dnl Bruno Haible , 2000-2003. ++# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. + +-AC_PREREQ(2.50) ++# serial 3 + +-AC_DEFUN([AM_NLS], +-[ +- AC_MSG_CHECKING([whether NLS is requested]) +- dnl Default is enabled NLS +- AC_ARG_ENABLE(nls, +- [ --disable-nls do not use Native Language Support], +- USE_NLS=$enableval, USE_NLS=yes) +- AC_MSG_RESULT($USE_NLS) +- AC_SUBST(USE_NLS) +-]) ++# _AM_MANGLE_OPTION(NAME) ++# ----------------------- ++AC_DEFUN([_AM_MANGLE_OPTION], ++[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) + +-# pkg.m4 - Macros to locate and utilise pkg-config. -*- Autoconf -*- +-# +-# Copyright © 2004 Scott James Remnant . +-# +-# This program is free software; you can redistribute it and/or modify +-# it under the terms of the GNU General Public License as published by +-# the Free Software Foundation; either version 2 of the License, or +-# (at your option) any later version. +-# +-# This program is distributed in the hope that it will be useful, but +-# WITHOUT ANY WARRANTY; without even the implied warranty of +-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +-# General Public License for more details. +-# +-# You should have received a copy of the GNU General Public License +-# along with this program; if not, write to the Free Software +-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +-# +-# As a special exception to the GNU General Public License, if you +-# distribute this file as part of a program that contains a +-# configuration script generated by Autoconf, you may include it under +-# the same distribution terms that you use for the rest of that program. ++# _AM_SET_OPTION(NAME) ++# ------------------------------ ++# Set option NAME. Presently that only means defining a flag for this option. ++AC_DEFUN([_AM_SET_OPTION], ++[m4_define(_AM_MANGLE_OPTION([$1]), 1)]) + +-# PKG_PROG_PKG_CONFIG([MIN-VERSION]) ++# _AM_SET_OPTIONS(OPTIONS) + # ---------------------------------- +-AC_DEFUN([PKG_PROG_PKG_CONFIG], +-[m4_pattern_forbid([^_?PKG_[A-Z_]+$]) +-m4_pattern_allow([^PKG_CONFIG(_PATH)?$]) +-AC_ARG_VAR([PKG_CONFIG], [path to pkg-config utility])dnl +-if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then +- AC_PATH_TOOL([PKG_CONFIG], [pkg-config]) +-fi +-if test -n "$PKG_CONFIG"; then +- _pkg_min_version=m4_default([$1], [0.9.0]) +- AC_MSG_CHECKING([pkg-config is at least version $_pkg_min_version]) +- if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then +- AC_MSG_RESULT([yes]) +- else +- AC_MSG_RESULT([no]) +- PKG_CONFIG="" +- fi +- +-fi[]dnl +-])# PKG_PROG_PKG_CONFIG ++# OPTIONS is a space-separated list of Automake options. ++AC_DEFUN([_AM_SET_OPTIONS], ++[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) ++ ++# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) ++# ------------------------------------------- ++# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. ++AC_DEFUN([_AM_IF_OPTION], ++[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) + +-# PKG_CHECK_EXISTS(MODULES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) +-# +-# Check to see whether a particular set of modules exists. Similar +-# to PKG_CHECK_MODULES(), but does not set variables or print errors. +-# ++# Check to make sure that the build environment is sane. -*- Autoconf -*- ++ ++# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005 ++# Free Software Foundation, Inc. + # +-# Similar to PKG_CHECK_MODULES, make sure that the first instance of +-# this or PKG_CHECK_MODULES is called, or make sure to call +-# PKG_CHECK_EXISTS manually +-# -------------------------------------------------------------- +-AC_DEFUN([PKG_CHECK_EXISTS], +-[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl +-if test -n "$PKG_CONFIG" && \ +- AC_RUN_LOG([$PKG_CONFIG --exists --print-errors "$1"]); then +- m4_ifval([$2], [$2], [:]) +-m4_ifvaln([$3], [else +- $3])dnl +-fi]) ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. + ++# serial 4 + +-# _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES]) +-# --------------------------------------------- +-m4_define([_PKG_CONFIG], +-[if test -n "$$1"; then +- pkg_cv_[]$1="$$1" +- elif test -n "$PKG_CONFIG"; then +- PKG_CHECK_EXISTS([$3], +- [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null`], +- [pkg_failed=yes]) +- else +- pkg_failed=untried +-fi[]dnl +-])# _PKG_CONFIG ++# AM_SANITY_CHECK ++# --------------- ++AC_DEFUN([AM_SANITY_CHECK], ++[AC_MSG_CHECKING([whether build environment is sane]) ++# Just in case ++sleep 1 ++echo timestamp > conftest.file ++# Do `set' in a subshell so we don't clobber the current shell's ++# arguments. Must try -L first in case configure is actually a ++# symlink; some systems play weird games with the mod time of symlinks ++# (eg FreeBSD returns the mod time of the symlink's containing ++# directory). ++if ( ++ set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` ++ if test "$[*]" = "X"; then ++ # -L didn't work. ++ set X `ls -t $srcdir/configure conftest.file` ++ fi ++ rm -f conftest.file ++ if test "$[*]" != "X $srcdir/configure conftest.file" \ ++ && test "$[*]" != "X conftest.file $srcdir/configure"; then + +-# _PKG_SHORT_ERRORS_SUPPORTED +-# ----------------------------- +-AC_DEFUN([_PKG_SHORT_ERRORS_SUPPORTED], +-[AC_REQUIRE([PKG_PROG_PKG_CONFIG]) +-if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then +- _pkg_short_errors_supported=yes +-else +- _pkg_short_errors_supported=no +-fi[]dnl +-])# _PKG_SHORT_ERRORS_SUPPORTED ++ # If neither matched, then we have a broken ls. This can happen ++ # if, for instance, CONFIG_SHELL is bash and it inherits a ++ # broken ls alias from the environment. This has actually ++ # happened. Such a system could not be considered "sane". ++ AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken ++alias in your environment]) ++ fi + ++ test "$[2]" = conftest.file ++ ) ++then ++ # Ok. ++ : ++else ++ AC_MSG_ERROR([newly created file is older than distributed files! ++Check your system clock]) ++fi ++AC_MSG_RESULT(yes)]) + +-# PKG_CHECK_MODULES(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND], +-# [ACTION-IF-NOT-FOUND]) +-# +-# +-# Note that if there is a possibility the first call to +-# PKG_CHECK_MODULES might not happen, you should be sure to include an +-# explicit call to PKG_PROG_PKG_CONFIG in your configure.ac +-# ++# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. + # +-# -------------------------------------------------------------- +-AC_DEFUN([PKG_CHECK_MODULES], +-[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl +-AC_ARG_VAR([$1][_CFLAGS], [C compiler flags for $1, overriding pkg-config])dnl +-AC_ARG_VAR([$1][_LIBS], [linker flags for $1, overriding pkg-config])dnl ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. + +-pkg_failed=no +-AC_MSG_CHECKING([for $1]) ++# AM_PROG_INSTALL_STRIP ++# --------------------- ++# One issue with vendor `install' (even GNU) is that you can't ++# specify the program used to strip binaries. This is especially ++# annoying in cross-compiling environments, where the build's strip ++# is unlikely to handle the host's binaries. ++# Fortunately install-sh will honor a STRIPPROG variable, so we ++# always use install-sh in `make install-strip', and initialize ++# STRIPPROG with the value of the STRIP variable (set by the user). ++AC_DEFUN([AM_PROG_INSTALL_STRIP], ++[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl ++# Installed binaries are usually stripped using `strip' when the user ++# run `make install-strip'. However `strip' might not be the right ++# tool to use in cross-compilation environments, therefore Automake ++# will honor the `STRIP' environment variable to overrule this program. ++dnl Don't test for $cross_compiling = yes, because it might be `maybe'. ++if test "$cross_compiling" != no; then ++ AC_CHECK_TOOL([STRIP], [strip], :) ++fi ++INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" ++AC_SUBST([INSTALL_STRIP_PROGRAM])]) + +-_PKG_CONFIG([$1][_CFLAGS], [cflags], [$2]) +-_PKG_CONFIG([$1][_LIBS], [libs], [$2]) ++# Copyright (C) 2006 Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. + +-m4_define([_PKG_TEXT], [Alternatively, you may set the environment variables $1[]_CFLAGS +-and $1[]_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details.]) ++# _AM_SUBST_NOTMAKE(VARIABLE) ++# --------------------------- ++# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in. ++# This macro is traced by Automake. ++AC_DEFUN([_AM_SUBST_NOTMAKE]) + +-if test $pkg_failed = yes; then +- _PKG_SHORT_ERRORS_SUPPORTED +- if test $_pkg_short_errors_supported = yes; then +- $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "$2" 2>&1` +- else +- $1[]_PKG_ERRORS=`$PKG_CONFIG --print-errors "$2" 2>&1` +- fi +- # Put the nasty error message in config.log where it belongs +- echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD ++# Check how to create a tarball. -*- Autoconf -*- + +- ifelse([$4], , [AC_MSG_ERROR(dnl +-[Package requirements ($2) were not met: ++# Copyright (C) 2004, 2005 Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. + +-$$1_PKG_ERRORS ++# serial 2 + +-Consider adjusting the PKG_CONFIG_PATH environment variable if you +-installed software in a non-standard prefix. ++# _AM_PROG_TAR(FORMAT) ++# -------------------- ++# Check how to create a tarball in format FORMAT. ++# FORMAT should be one of `v7', `ustar', or `pax'. ++# ++# Substitute a variable $(am__tar) that is a command ++# writing to stdout a FORMAT-tarball containing the directory ++# $tardir. ++# tardir=directory && $(am__tar) > result.tar ++# ++# Substitute a variable $(am__untar) that extract such ++# a tarball read from stdin. ++# $(am__untar) < result.tar ++AC_DEFUN([_AM_PROG_TAR], ++[# Always define AMTAR for backward compatibility. ++AM_MISSING_PROG([AMTAR], [tar]) ++m4_if([$1], [v7], ++ [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'], ++ [m4_case([$1], [ustar],, [pax],, ++ [m4_fatal([Unknown tar format])]) ++AC_MSG_CHECKING([how to create a $1 tar archive]) ++# Loop over all known methods to create a tar archive until one works. ++_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' ++_am_tools=${am_cv_prog_tar_$1-$_am_tools} ++# Do not fold the above two line into one, because Tru64 sh and ++# Solaris sh will not grok spaces in the rhs of `-'. ++for _am_tool in $_am_tools ++do ++ case $_am_tool in ++ gnutar) ++ for _am_tar in tar gnutar gtar; ++ do ++ AM_RUN_LOG([$_am_tar --version]) && break ++ done ++ am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' ++ am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' ++ am__untar="$_am_tar -xf -" ++ ;; ++ plaintar) ++ # Must skip GNU tar: if it does not support --format= it doesn't create ++ # ustar tarball either. ++ (tar --version) >/dev/null 2>&1 && continue ++ am__tar='tar chf - "$$tardir"' ++ am__tar_='tar chf - "$tardir"' ++ am__untar='tar xf -' ++ ;; ++ pax) ++ am__tar='pax -L -x $1 -w "$$tardir"' ++ am__tar_='pax -L -x $1 -w "$tardir"' ++ am__untar='pax -r' ++ ;; ++ cpio) ++ am__tar='find "$$tardir" -print | cpio -o -H $1 -L' ++ am__tar_='find "$tardir" -print | cpio -o -H $1 -L' ++ am__untar='cpio -i -H $1 -d' ++ ;; ++ none) ++ am__tar=false ++ am__tar_=false ++ am__untar=false ++ ;; ++ esac + +-_PKG_TEXT +-])], +- [AC_MSG_RESULT([no]) +- $4]) +-elif test $pkg_failed = untried; then +- ifelse([$4], , [AC_MSG_FAILURE(dnl +-[The pkg-config script could not be found or is too old. Make sure it +-is in your PATH or set the PKG_CONFIG environment variable to the full +-path to pkg-config. ++ # If the value was cached, stop now. We just wanted to have am__tar ++ # and am__untar set. ++ test -n "${am_cv_prog_tar_$1}" && break + +-_PKG_TEXT ++ # tar/untar a dummy directory, and stop if the command works ++ rm -rf conftest.dir ++ mkdir conftest.dir ++ echo GrepMe > conftest.dir/file ++ AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) ++ rm -rf conftest.dir ++ if test -s conftest.tar; then ++ AM_RUN_LOG([$am__untar /dev/null 2>&1 && break ++ fi ++done ++rm -rf conftest.dir + +-To get pkg-config, see .])], +- [$4]) +-else +- $1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS +- $1[]_LIBS=$pkg_cv_[]$1[]_LIBS +- AC_MSG_RESULT([yes]) +- ifelse([$3], , :, [$3]) +-fi[]dnl +-])# PKG_CHECK_MODULES ++AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) ++AC_MSG_RESULT([$am_cv_prog_tar_$1])]) ++AC_SUBST([am__tar]) ++AC_SUBST([am__untar]) ++]) # _AM_PROG_TAR + +Index: gnome-session-2.25.90/capplet/Makefile.in +=================================================================== +--- gnome-session-2.25.90.orig/capplet/Makefile.in 2009-02-04 18:27:15.000000000 +0000 ++++ gnome-session-2.25.90/capplet/Makefile.in 2009-02-04 18:29:59.000000000 +0000 +@@ -92,10 +92,6 @@ + COMPAT_LIBS = @COMPAT_LIBS@ + CPP = @CPP@ + CPPFLAGS = @CPPFLAGS@ +-CXX = @CXX@ +-CXXCPP = @CXXCPP@ +-CXXDEPMODE = @CXXDEPMODE@ +-CXXFLAGS = @CXXFLAGS@ + CYGPATH_W = @CYGPATH_W@ + DATADIRNAME = @DATADIRNAME@ + DBUS_GLIB_CFLAGS = @DBUS_GLIB_CFLAGS@ +@@ -105,7 +101,7 @@ + DISABLE_DEPRECATED = @DISABLE_DEPRECATED@ + DISABLE_DEPRECATED_CFLAGS = @DISABLE_DEPRECATED_CFLAGS@ + DSYMUTIL = @DSYMUTIL@ +-ECHO = @ECHO@ ++DUMPBIN = @DUMPBIN@ + ECHO_C = @ECHO_C@ + ECHO_N = @ECHO_N@ + ECHO_T = @ECHO_T@ +@@ -113,8 +109,7 @@ + EGG_SMCLIENT_LIBS = @EGG_SMCLIENT_LIBS@ + EGREP = @EGREP@ + EXEEXT = @EXEEXT@ +-F77 = @F77@ +-FFLAGS = @FFLAGS@ ++FGREP = @FGREP@ + GCONFTOOL = @GCONFTOOL@ + GCONF_CFLAGS = @GCONF_CFLAGS@ + GCONF_LIBS = @GCONF_LIBS@ +@@ -139,14 +134,35 @@ + INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ + INSTOBJEXT = @INSTOBJEXT@ + INTLLIBS = @INTLLIBS@ ++INTLTOOL_CAVES_RULE = @INTLTOOL_CAVES_RULE@ ++INTLTOOL_DESKTOP_RULE = @INTLTOOL_DESKTOP_RULE@ ++INTLTOOL_DIRECTORY_RULE = @INTLTOOL_DIRECTORY_RULE@ + INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ ++INTLTOOL_KBD_RULE = @INTLTOOL_KBD_RULE@ ++INTLTOOL_KEYS_RULE = @INTLTOOL_KEYS_RULE@ + INTLTOOL_MERGE = @INTLTOOL_MERGE@ ++INTLTOOL_OAF_RULE = @INTLTOOL_OAF_RULE@ + INTLTOOL_PERL = @INTLTOOL_PERL@ ++INTLTOOL_POLICY_RULE = @INTLTOOL_POLICY_RULE@ ++INTLTOOL_PONG_RULE = @INTLTOOL_PONG_RULE@ ++INTLTOOL_PROP_RULE = @INTLTOOL_PROP_RULE@ ++INTLTOOL_SCHEMAS_RULE = @INTLTOOL_SCHEMAS_RULE@ ++INTLTOOL_SERVER_RULE = @INTLTOOL_SERVER_RULE@ ++INTLTOOL_SERVICE_RULE = @INTLTOOL_SERVICE_RULE@ ++INTLTOOL_SHEET_RULE = @INTLTOOL_SHEET_RULE@ ++INTLTOOL_SOUNDLIST_RULE = @INTLTOOL_SOUNDLIST_RULE@ ++INTLTOOL_THEME_RULE = @INTLTOOL_THEME_RULE@ ++INTLTOOL_UI_RULE = @INTLTOOL_UI_RULE@ + INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ ++INTLTOOL_XAM_RULE = @INTLTOOL_XAM_RULE@ ++INTLTOOL_XML_NOMERGE_RULE = @INTLTOOL_XML_NOMERGE_RULE@ ++INTLTOOL_XML_RULE = @INTLTOOL_XML_RULE@ ++LD = @LD@ + LDFLAGS = @LDFLAGS@ + LIBOBJS = @LIBOBJS@ + LIBS = @LIBS@ + LIBTOOL = @LIBTOOL@ ++LIPO = @LIPO@ + LN_S = @LN_S@ + LTLIBOBJS = @LTLIBOBJS@ + MAINT = @MAINT@ +@@ -156,8 +172,11 @@ + MSGFMT = @MSGFMT@ + MSGFMT_OPTS = @MSGFMT_OPTS@ + MSGMERGE = @MSGMERGE@ ++NM = @NM@ + NMEDIT = @NMEDIT@ + OBJEXT = @OBJEXT@ ++OTOOL = @OTOOL@ ++OTOOL64 = @OTOOL64@ + PACKAGE = @PACKAGE@ + PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ + PACKAGE_NAME = @PACKAGE_NAME@ +@@ -205,8 +224,7 @@ + abs_top_builddir = @abs_top_builddir@ + abs_top_srcdir = @abs_top_srcdir@ + ac_ct_CC = @ac_ct_CC@ +-ac_ct_CXX = @ac_ct_CXX@ +-ac_ct_F77 = @ac_ct_F77@ ++ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ + am__include = @am__include@ + am__leading_dot = @am__leading_dot@ + am__quote = @am__quote@ +@@ -237,6 +255,7 @@ + libexecdir = @libexecdir@ + localedir = @localedir@ + localstatedir = @localstatedir@ ++lt_ECHO = @lt_ECHO@ + mandir = @mandir@ + mkdir_p = @mkdir_p@ + oldincludedir = @oldincludedir@ +@@ -249,7 +268,6 @@ + srcdir = @srcdir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ +-top_build_prefix = @top_build_prefix@ + top_builddir = @top_builddir@ + top_srcdir = @top_srcdir@ + NULL = +Index: gnome-session-2.25.90/compat/Makefile.in +=================================================================== +--- gnome-session-2.25.90.orig/compat/Makefile.in 2009-02-04 18:27:20.000000000 +0000 ++++ gnome-session-2.25.90/compat/Makefile.in 2009-02-04 18:29:59.000000000 +0000 +@@ -111,10 +111,6 @@ + COMPAT_LIBS = @COMPAT_LIBS@ + CPP = @CPP@ + CPPFLAGS = @CPPFLAGS@ +-CXX = @CXX@ +-CXXCPP = @CXXCPP@ +-CXXDEPMODE = @CXXDEPMODE@ +-CXXFLAGS = @CXXFLAGS@ + CYGPATH_W = @CYGPATH_W@ + DATADIRNAME = @DATADIRNAME@ + DBUS_GLIB_CFLAGS = @DBUS_GLIB_CFLAGS@ +@@ -124,7 +120,7 @@ + DISABLE_DEPRECATED = @DISABLE_DEPRECATED@ + DISABLE_DEPRECATED_CFLAGS = @DISABLE_DEPRECATED_CFLAGS@ + DSYMUTIL = @DSYMUTIL@ +-ECHO = @ECHO@ ++DUMPBIN = @DUMPBIN@ + ECHO_C = @ECHO_C@ + ECHO_N = @ECHO_N@ + ECHO_T = @ECHO_T@ +@@ -132,8 +128,7 @@ + EGG_SMCLIENT_LIBS = @EGG_SMCLIENT_LIBS@ + EGREP = @EGREP@ + EXEEXT = @EXEEXT@ +-F77 = @F77@ +-FFLAGS = @FFLAGS@ ++FGREP = @FGREP@ + GCONFTOOL = @GCONFTOOL@ + GCONF_CFLAGS = @GCONF_CFLAGS@ + GCONF_LIBS = @GCONF_LIBS@ +@@ -158,14 +153,35 @@ + INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ + INSTOBJEXT = @INSTOBJEXT@ + INTLLIBS = @INTLLIBS@ ++INTLTOOL_CAVES_RULE = @INTLTOOL_CAVES_RULE@ ++INTLTOOL_DESKTOP_RULE = @INTLTOOL_DESKTOP_RULE@ ++INTLTOOL_DIRECTORY_RULE = @INTLTOOL_DIRECTORY_RULE@ + INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ ++INTLTOOL_KBD_RULE = @INTLTOOL_KBD_RULE@ ++INTLTOOL_KEYS_RULE = @INTLTOOL_KEYS_RULE@ + INTLTOOL_MERGE = @INTLTOOL_MERGE@ ++INTLTOOL_OAF_RULE = @INTLTOOL_OAF_RULE@ + INTLTOOL_PERL = @INTLTOOL_PERL@ ++INTLTOOL_POLICY_RULE = @INTLTOOL_POLICY_RULE@ ++INTLTOOL_PONG_RULE = @INTLTOOL_PONG_RULE@ ++INTLTOOL_PROP_RULE = @INTLTOOL_PROP_RULE@ ++INTLTOOL_SCHEMAS_RULE = @INTLTOOL_SCHEMAS_RULE@ ++INTLTOOL_SERVER_RULE = @INTLTOOL_SERVER_RULE@ ++INTLTOOL_SERVICE_RULE = @INTLTOOL_SERVICE_RULE@ ++INTLTOOL_SHEET_RULE = @INTLTOOL_SHEET_RULE@ ++INTLTOOL_SOUNDLIST_RULE = @INTLTOOL_SOUNDLIST_RULE@ ++INTLTOOL_THEME_RULE = @INTLTOOL_THEME_RULE@ ++INTLTOOL_UI_RULE = @INTLTOOL_UI_RULE@ + INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ ++INTLTOOL_XAM_RULE = @INTLTOOL_XAM_RULE@ ++INTLTOOL_XML_NOMERGE_RULE = @INTLTOOL_XML_NOMERGE_RULE@ ++INTLTOOL_XML_RULE = @INTLTOOL_XML_RULE@ ++LD = @LD@ + LDFLAGS = @LDFLAGS@ + LIBOBJS = @LIBOBJS@ + LIBS = @LIBS@ + LIBTOOL = @LIBTOOL@ ++LIPO = @LIPO@ + LN_S = @LN_S@ + LTLIBOBJS = @LTLIBOBJS@ + MAINT = @MAINT@ +@@ -175,8 +191,11 @@ + MSGFMT = @MSGFMT@ + MSGFMT_OPTS = @MSGFMT_OPTS@ + MSGMERGE = @MSGMERGE@ ++NM = @NM@ + NMEDIT = @NMEDIT@ + OBJEXT = @OBJEXT@ ++OTOOL = @OTOOL@ ++OTOOL64 = @OTOOL64@ + PACKAGE = @PACKAGE@ + PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ + PACKAGE_NAME = @PACKAGE_NAME@ +@@ -224,8 +243,7 @@ + abs_top_builddir = @abs_top_builddir@ + abs_top_srcdir = @abs_top_srcdir@ + ac_ct_CC = @ac_ct_CC@ +-ac_ct_CXX = @ac_ct_CXX@ +-ac_ct_F77 = @ac_ct_F77@ ++ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ + am__include = @am__include@ + am__leading_dot = @am__leading_dot@ + am__quote = @am__quote@ +@@ -256,6 +274,7 @@ + libexecdir = @libexecdir@ + localedir = @localedir@ + localstatedir = @localstatedir@ ++lt_ECHO = @lt_ECHO@ + mandir = @mandir@ + mkdir_p = @mkdir_p@ + oldincludedir = @oldincludedir@ +@@ -268,7 +287,6 @@ + srcdir = @srcdir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ +-top_build_prefix = @top_build_prefix@ + top_builddir = @top_builddir@ + top_srcdir = @top_srcdir@ + INCLUDES = \ +Index: gnome-session-2.25.90/config.guess +=================================================================== +--- gnome-session-2.25.90.orig/config.guess 2009-02-04 18:27:25.000000000 +0000 ++++ gnome-session-2.25.90/config.guess 2009-02-04 18:29:59.000000000 +0000 +@@ -4,7 +4,7 @@ + # 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 + # Free Software Foundation, Inc. + +-timestamp='2008-01-08' ++timestamp='2008-01-23' + + # This file is free software; you can redistribute it and/or modify it + # under the terms of the GNU General Public License as published by +@@ -1484,9 +1484,9 @@ + the operating system you are using. It is advised that you + download the most up to date version of the config scripts from + +- http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.guess ++ http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD + and +- http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.sub ++ http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD + + If the version you run ($0) is already up to date, please + send the following data and any information you think might be +Index: gnome-session-2.25.90/config.h.in +=================================================================== +--- gnome-session-2.25.90.orig/config.h.in 2009-02-04 18:27:33.000000000 +0000 ++++ gnome-session-2.25.90/config.h.in 2009-02-04 18:29:58.000000000 +0000 +@@ -81,6 +81,10 @@ + /* Have the XTest extension library */ + #undef HAVE_XTEST + ++/* Define to the sub-directory in which libtool stores uninstalled libraries. ++ */ ++#undef LT_OBJDIR ++ + /* Name of package */ + #undef PACKAGE + +Index: gnome-session-2.25.90/configure +=================================================================== +--- gnome-session-2.25.90.orig/configure 2009-02-04 18:27:38.000000000 +0000 ++++ gnome-session-2.25.90/configure 2009-02-04 18:29:56.000000000 +0000 +@@ -1,11 +1,11 @@ + #! /bin/sh + # Guess values for system-dependent variables and create Makefiles. +-# Generated by GNU Autoconf 2.62 for gnome-session 2.25.90. ++# Generated by GNU Autoconf 2.61 for gnome-session 2.25.90. + # + # Report bugs to . + # + # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, +-# 2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++# 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc. + # This configure script is free software; the Free Software Foundation + # gives unlimited permission to copy, distribute and modify it. + ## --------------------- ## +@@ -17,7 +17,7 @@ + if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: +- # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which ++ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +@@ -39,45 +39,17 @@ + as_cr_digits='0123456789' + as_cr_alnum=$as_cr_Letters$as_cr_digits + +-as_nl=' +-' +-export as_nl +-# Printing a long string crashes Solaris 7 /usr/bin/printf. +-as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo +-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo +-if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then +- as_echo='printf %s\n' +- as_echo_n='printf %s' +-else +- if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then +- as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' +- as_echo_n='/usr/ucb/echo -n' +- else +- as_echo_body='eval expr "X$1" : "X\\(.*\\)"' +- as_echo_n_body='eval +- arg=$1; +- case $arg in +- *"$as_nl"*) +- expr "X$arg" : "X\\(.*\\)$as_nl"; +- arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; +- esac; +- expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" +- ' +- export as_echo_n_body +- as_echo_n='sh -c $as_echo_n_body as_echo' +- fi +- export as_echo_body +- as_echo='sh -c $as_echo_body as_echo' +-fi +- + # The user is always right. + if test "${PATH_SEPARATOR+set}" != set; then +- PATH_SEPARATOR=: +- (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { +- (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || +- PATH_SEPARATOR=';' +- } ++ echo "#! /bin/sh" >conf$$.sh ++ echo "exit 0" >>conf$$.sh ++ chmod +x conf$$.sh ++ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then ++ PATH_SEPARATOR=';' ++ else ++ PATH_SEPARATOR=: ++ fi ++ rm -f conf$$.sh + fi + + # Support unset when possible. +@@ -93,6 +65,8 @@ + # there to prevent editors from complaining about space-tab. + # (If _AS_PATH_WALK were called with IFS unset, it would disable word + # splitting by setting IFS to empty value.) ++as_nl=' ++' + IFS=" "" $as_nl" + + # Find who we are. Look in the path if we contain no directory separator. +@@ -115,7 +89,7 @@ + as_myself=$0 + fi + if test ! -f "$as_myself"; then +- $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 ++ echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 + { (exit 1); exit 1; } + fi + +@@ -128,10 +102,17 @@ + PS4='+ ' + + # NLS nuisances. +-LC_ALL=C +-export LC_ALL +-LANGUAGE=C +-export LANGUAGE ++for as_var in \ ++ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ ++ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ ++ LC_TELEPHONE LC_TIME ++do ++ if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then ++ eval $as_var=C; export $as_var ++ else ++ ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var ++ fi ++done + + # Required to use basename. + if expr a : '\(a\)' >/dev/null 2>&1 && +@@ -153,7 +134,7 @@ + $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| . 2>/dev/null || +-$as_echo X/"$0" | ++echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ + s//\1/ + q +@@ -179,7 +160,7 @@ + as_have_required=no + fi + +- if test $as_have_required = yes && (eval ": ++ if test $as_have_required = yes && (eval ": + (as_func_return () { + (exit \$1) + } +@@ -261,7 +242,7 @@ + if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: +- # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which ++ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +@@ -282,7 +263,7 @@ + if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: +- # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which ++ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +@@ -362,10 +343,10 @@ + + if test "x$CONFIG_SHELL" != x; then + for as_var in BASH_ENV ENV +- do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var +- done +- export CONFIG_SHELL +- exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"} ++ do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var ++ done ++ export CONFIG_SHELL ++ exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"} + fi + + +@@ -434,10 +415,9 @@ + + test \$exitcode = 0") || { + echo No shell found that supports shell functions. +- echo Please tell bug-autoconf@gnu.org about your system, +- echo including any error possibly output before this message. +- echo This can help us improve future autoconf versions. +- echo Configuration will now proceed without shell functions. ++ echo Please tell autoconf@gnu.org about your system, ++ echo including any error possibly output before this ++ echo message + } + + +@@ -473,7 +453,7 @@ + s/-\n.*// + ' >$as_me.lineno && + chmod +x "$as_me.lineno" || +- { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 ++ { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 + { (exit 1); exit 1; }; } + + # Don't try to exec as it changes $[0], causing all sort of problems +@@ -501,6 +481,7 @@ + *) + ECHO_N='-n';; + esac ++ + if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +@@ -513,22 +494,19 @@ + rm -f conf$$.dir/conf$$.file + else + rm -f conf$$.dir +- mkdir conf$$.dir 2>/dev/null ++ mkdir conf$$.dir + fi +-if (echo >conf$$.file) 2>/dev/null; then +- if ln -s conf$$.file conf$$ 2>/dev/null; then +- as_ln_s='ln -s' +- # ... but there are two gotchas: +- # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. +- # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. +- # In both cases, we have to default to `cp -p'. +- ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || +- as_ln_s='cp -p' +- elif ln conf$$.file conf$$ 2>/dev/null; then +- as_ln_s=ln +- else ++echo >conf$$.file ++if ln -s conf$$.file conf$$ 2>/dev/null; then ++ as_ln_s='ln -s' ++ # ... but there are two gotchas: ++ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. ++ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. ++ # In both cases, we have to default to `cp -p'. ++ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -p' +- fi ++elif ln conf$$.file conf$$ 2>/dev/null; then ++ as_ln_s=ln + else + as_ln_s='cp -p' + fi +@@ -553,10 +531,10 @@ + as_test_x=' + eval sh -c '\'' + if test -d "$1"; then +- test -d "$1/."; ++ test -d "$1/."; + else + case $1 in +- -*)set "./$1";; ++ -*)set "./$1";; + esac; + case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in + ???[sx]*):;;*)false;;esac;fi +@@ -577,22 +555,22 @@ + # Check that we are running under the correct shell. + SHELL=${CONFIG_SHELL-/bin/sh} + +-case X$ECHO in ++case X$lt_ECHO in + X*--fallback-echo) + # Remove one level of quotation (which was required for Make). +- ECHO=`echo "$ECHO" | sed 's,\\\\\$\\$0,'$0','` ++ ECHO=`echo "$lt_ECHO" | sed 's,\\\\\$\\$0,'$0','` + ;; + esac + +-echo=${ECHO-echo} ++ECHO=${lt_ECHO-echo} + if test "X$1" = X--no-reexec; then + # Discard the --no-reexec flag, and continue. + shift + elif test "X$1" = X--fallback-echo; then + # Avoid inline document here, it may be left over + : +-elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then +- # Yippee, $echo works! ++elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' ; then ++ # Yippee, $ECHO works! + : + else + # Restart under the correct shell. +@@ -602,9 +580,9 @@ + if test "X$1" = X--fallback-echo; then + # used as fallback echo + shift +- cat </dev/null 2>&1 && unset CDPATH + +-if test -z "$ECHO"; then +-if test "X${echo_test_string+set}" != Xset; then +-# find a string as large as possible, as long as the shell can cope with it +- for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do +- # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... +- if (echo_test_string=`eval $cmd`) 2>/dev/null && +- echo_test_string=`eval $cmd` && +- (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null +- then +- break +- fi +- done +-fi ++if test -z "$lt_ECHO"; then ++ if test "X${echo_test_string+set}" != Xset; then ++ # find a string as large as possible, as long as the shell can cope with it ++ for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do ++ # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... ++ if { echo_test_string=`eval $cmd`; } 2>/dev/null && ++ { test "X$echo_test_string" = "X$echo_test_string"; } 2>/dev/null ++ then ++ break ++ fi ++ done ++ fi + +-if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && +- echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && +- test "X$echo_testing_string" = "X$echo_test_string"; then +- : +-else +- # The Solaris, AIX, and Digital Unix default echo programs unquote +- # backslashes. This makes it impossible to quote backslashes using +- # echo "$something" | sed 's/\\/\\\\/g' +- # +- # So, first we look for a working echo in the user's PATH. ++ if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' && ++ echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` && ++ test "X$echo_testing_string" = "X$echo_test_string"; then ++ : ++ else ++ # The Solaris, AIX, and Digital Unix default echo programs unquote ++ # backslashes. This makes it impossible to quote backslashes using ++ # echo "$something" | sed 's/\\/\\\\/g' ++ # ++ # So, first we look for a working echo in the user's PATH. + +- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR +- for dir in $PATH /usr/ucb; do ++ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR ++ for dir in $PATH /usr/ucb; do ++ IFS="$lt_save_ifs" ++ if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && ++ test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && ++ echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && ++ test "X$echo_testing_string" = "X$echo_test_string"; then ++ ECHO="$dir/echo" ++ break ++ fi ++ done + IFS="$lt_save_ifs" +- if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && +- test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && +- echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && +- test "X$echo_testing_string" = "X$echo_test_string"; then +- echo="$dir/echo" +- break +- fi +- done +- IFS="$lt_save_ifs" + +- if test "X$echo" = Xecho; then +- # We didn't find a better echo, so look for alternatives. +- if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' && +- echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` && +- test "X$echo_testing_string" = "X$echo_test_string"; then +- # This shell has a builtin print -r that does the trick. +- echo='print -r' +- elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) && +- test "X$CONFIG_SHELL" != X/bin/ksh; then +- # If we have ksh, try running configure again with it. +- ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} +- export ORIGINAL_CONFIG_SHELL +- CONFIG_SHELL=/bin/ksh +- export CONFIG_SHELL +- exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"} +- else +- # Try using printf. +- echo='printf %s\n' +- if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && +- echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && +- test "X$echo_testing_string" = "X$echo_test_string"; then +- # Cool, printf works +- : +- elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && +- test "X$echo_testing_string" = 'X\t' && +- echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && ++ if test "X$ECHO" = Xecho; then ++ # We didn't find a better echo, so look for alternatives. ++ if test "X`{ print -r '\t'; } 2>/dev/null`" = 'X\t' && ++ echo_testing_string=`{ print -r "$echo_test_string"; } 2>/dev/null` && ++ test "X$echo_testing_string" = "X$echo_test_string"; then ++ # This shell has a builtin print -r that does the trick. ++ ECHO='print -r' ++ elif { test -f /bin/ksh || test -f /bin/ksh$ac_exeext; } && ++ test "X$CONFIG_SHELL" != X/bin/ksh; then ++ # If we have ksh, try running configure again with it. ++ ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} ++ export ORIGINAL_CONFIG_SHELL ++ CONFIG_SHELL=/bin/ksh ++ export CONFIG_SHELL ++ exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"} ++ else ++ # Try using printf. ++ ECHO='printf %s\n' ++ if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' && ++ echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then +- CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL +- export CONFIG_SHELL +- SHELL="$CONFIG_SHELL" +- export SHELL +- echo="$CONFIG_SHELL $0 --fallback-echo" +- elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && +- test "X$echo_testing_string" = 'X\t' && +- echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && +- test "X$echo_testing_string" = "X$echo_test_string"; then +- echo="$CONFIG_SHELL $0 --fallback-echo" +- else +- # maybe with a smaller string... +- prev=: ++ # Cool, printf works ++ : ++ elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && ++ test "X$echo_testing_string" = 'X\t' && ++ echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && ++ test "X$echo_testing_string" = "X$echo_test_string"; then ++ CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL ++ export CONFIG_SHELL ++ SHELL="$CONFIG_SHELL" ++ export SHELL ++ ECHO="$CONFIG_SHELL $0 --fallback-echo" ++ elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && ++ test "X$echo_testing_string" = 'X\t' && ++ echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && ++ test "X$echo_testing_string" = "X$echo_test_string"; then ++ ECHO="$CONFIG_SHELL $0 --fallback-echo" ++ else ++ # maybe with a smaller string... ++ prev=: + +- for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do +- if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null +- then +- break +- fi +- prev="$cmd" +- done ++ for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do ++ if { test "X$echo_test_string" = "X`eval $cmd`"; } 2>/dev/null ++ then ++ break ++ fi ++ prev="$cmd" ++ done + +- if test "$prev" != 'sed 50q "$0"'; then +- echo_test_string=`eval $prev` +- export echo_test_string +- exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"} +- else +- # Oops. We lost completely, so just stick with echo. +- echo=echo +- fi ++ if test "$prev" != 'sed 50q "$0"'; then ++ echo_test_string=`eval $prev` ++ export echo_test_string ++ exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"} ++ else ++ # Oops. We lost completely, so just stick with echo. ++ ECHO=echo ++ fi ++ fi + fi + fi + fi + fi +-fi + + # Copy echo and quote the copy suitably for passing to libtool from + # the Makefile, instead of quoting the original, which is used later. +-ECHO=$echo +-if test "X$ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then +- ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo" ++lt_ECHO=$ECHO ++if test "X$lt_ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then ++ lt_ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo" + fi + + + + +-tagnames=${tagnames+${tagnames},}CXX +- +-tagnames=${tagnames+${tagnames},}F77 +- + exec 7<&0 &1 + + # Name of the host. +@@ -843,7 +816,6 @@ + install_sh + STRIP + INSTALL_STRIP_PROGRAM +-MKDIR_P + mkdir_p + AWK + SET_MAKE +@@ -904,6 +876,7 @@ + CPP + GREP + EGREP ++LIBTOOL + build + build_cpu + build_vendor +@@ -913,23 +886,20 @@ + host_vendor + host_os + SED ++FGREP ++LD ++DUMPBIN ++ac_ct_DUMPBIN ++NM + LN_S +-ECHO + AR + RANLIB ++lt_ECHO + DSYMUTIL + NMEDIT +-CXX +-CXXFLAGS +-ac_ct_CXX +-CXXDEPMODE +-am__fastdepCXX_TRUE +-am__fastdepCXX_FALSE +-CXXCPP +-F77 +-FFLAGS +-ac_ct_F77 +-LIBTOOL ++LIPO ++OTOOL ++OTOOL64 + GLIB_GENMARSHAL + DISABLE_DEPRECATED + AT_SPI_REGISTRYD_DIR +@@ -996,32 +966,6 @@ + LIBOBJS + LTLIBOBJS' + ac_subst_files='' +-ac_user_opts=' +-enable_option_checking +-enable_maintainer_mode +-enable_debug +-enable_nls +-enable_dependency_tracking +-enable_shared +-enable_static +-enable_fast_install +-with_gnu_ld +-enable_libtool_lock +-with_pic +-with_tags +-with_at_spi_registryd_directory +-enable_compile_warnings +-enable_iso_c +-enable_deprecations +-enable_polkit +-with_gconf_source +-with_gconf_schema_file_dir +-enable_schemas_install +-with_x +-enable_docbook_docs +-enable_ipv6 +-enable_rebuilds +-' + ac_precious_vars='build_alias + host_alias + target_alias +@@ -1031,12 +975,6 @@ + LIBS + CPPFLAGS + CPP +-CXX +-CXXFLAGS +-CCC +-CXXCPP +-F77 +-FFLAGS + PKG_CONFIG + GNOME_SESSION_CFLAGS + GNOME_SESSION_LIBS +@@ -1068,8 +1006,6 @@ + # Initialize some variables set by options. + ac_init_help= + ac_init_version=false +-ac_unrecognized_opts= +-ac_unrecognized_sep= + # The variables have the same names as the options, with + # dashes changed to underlines. + cache_file=/dev/null +@@ -1168,21 +1104,13 @@ + datarootdir=$ac_optarg ;; + + -disable-* | --disable-*) +- ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` ++ ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'` + # Reject names that are not valid shell variable names. +- expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && +- { $as_echo "$as_me: error: invalid feature name: $ac_useropt" >&2 ++ expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null && ++ { echo "$as_me: error: invalid feature name: $ac_feature" >&2 + { (exit 1); exit 1; }; } +- ac_useropt_orig=$ac_useropt +- ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` +- case $ac_user_opts in +- *" +-"enable_$ac_useropt" +-"*) ;; +- *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig" +- ac_unrecognized_sep=', ';; +- esac +- eval enable_$ac_useropt=no ;; ++ ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'` ++ eval enable_$ac_feature=no ;; + + -docdir | --docdir | --docdi | --doc | --do) + ac_prev=docdir ;; +@@ -1195,21 +1123,13 @@ + dvidir=$ac_optarg ;; + + -enable-* | --enable-*) +- ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` ++ ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` + # Reject names that are not valid shell variable names. +- expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && +- { $as_echo "$as_me: error: invalid feature name: $ac_useropt" >&2 ++ expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null && ++ { echo "$as_me: error: invalid feature name: $ac_feature" >&2 + { (exit 1); exit 1; }; } +- ac_useropt_orig=$ac_useropt +- ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` +- case $ac_user_opts in +- *" +-"enable_$ac_useropt" +-"*) ;; +- *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig" +- ac_unrecognized_sep=', ';; +- esac +- eval enable_$ac_useropt=\$ac_optarg ;; ++ ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'` ++ eval enable_$ac_feature=\$ac_optarg ;; + + -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ + | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ +@@ -1400,38 +1320,22 @@ + ac_init_version=: ;; + + -with-* | --with-*) +- ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` ++ ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` + # Reject names that are not valid shell variable names. +- expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && +- { $as_echo "$as_me: error: invalid package name: $ac_useropt" >&2 ++ expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null && ++ { echo "$as_me: error: invalid package name: $ac_package" >&2 + { (exit 1); exit 1; }; } +- ac_useropt_orig=$ac_useropt +- ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` +- case $ac_user_opts in +- *" +-"with_$ac_useropt" +-"*) ;; +- *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig" +- ac_unrecognized_sep=', ';; +- esac +- eval with_$ac_useropt=\$ac_optarg ;; ++ ac_package=`echo $ac_package | sed 's/[-.]/_/g'` ++ eval with_$ac_package=\$ac_optarg ;; + + -without-* | --without-*) +- ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` ++ ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'` + # Reject names that are not valid shell variable names. +- expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && +- { $as_echo "$as_me: error: invalid package name: $ac_useropt" >&2 ++ expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null && ++ { echo "$as_me: error: invalid package name: $ac_package" >&2 + { (exit 1); exit 1; }; } +- ac_useropt_orig=$ac_useropt +- ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` +- case $ac_user_opts in +- *" +-"with_$ac_useropt" +-"*) ;; +- *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig" +- ac_unrecognized_sep=', ';; +- esac +- eval with_$ac_useropt=no ;; ++ ac_package=`echo $ac_package | sed 's/[-.]/_/g'` ++ eval with_$ac_package=no ;; + + --x) + # Obsolete; use --with-x. +@@ -1451,7 +1355,7 @@ + | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) + x_libraries=$ac_optarg ;; + +- -*) { $as_echo "$as_me: error: unrecognized option: $ac_option ++ -*) { echo "$as_me: error: unrecognized option: $ac_option + Try \`$0 --help' for more information." >&2 + { (exit 1); exit 1; }; } + ;; +@@ -1460,16 +1364,16 @@ + ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` + # Reject names that are not valid shell variable names. + expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && +- { $as_echo "$as_me: error: invalid variable name: $ac_envvar" >&2 ++ { echo "$as_me: error: invalid variable name: $ac_envvar" >&2 + { (exit 1); exit 1; }; } + eval $ac_envvar=\$ac_optarg + export $ac_envvar ;; + + *) + # FIXME: should be removed in autoconf 3.0. +- $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2 ++ echo "$as_me: WARNING: you should use --build, --host, --target" >&2 + expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && +- $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2 ++ echo "$as_me: WARNING: invalid host type: $ac_option" >&2 + : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} + ;; + +@@ -1478,38 +1382,22 @@ + + if test -n "$ac_prev"; then + ac_option=--`echo $ac_prev | sed 's/_/-/g'` +- { $as_echo "$as_me: error: missing argument to $ac_option" >&2 ++ { echo "$as_me: error: missing argument to $ac_option" >&2 + { (exit 1); exit 1; }; } + fi + +-if test -n "$ac_unrecognized_opts"; then +- case $enable_option_checking in +- no) ;; +- fatal) { $as_echo "$as_me: error: Unrecognized options: $ac_unrecognized_opts" >&2 +- { (exit 1); exit 1; }; } ;; +- *) $as_echo "$as_me: WARNING: Unrecognized options: $ac_unrecognized_opts" >&2 ;; +- esac +-fi +- +-# Check all directory arguments for consistency. ++# Be sure to have absolute directory names. + for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ + datadir sysconfdir sharedstatedir localstatedir includedir \ + oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ + libdir localedir mandir + do + eval ac_val=\$$ac_var +- # Remove trailing slashes. +- case $ac_val in +- */ ) +- ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` +- eval $ac_var=\$ac_val;; +- esac +- # Be sure to have absolute directory names. + case $ac_val in + [\\/$]* | ?:[\\/]* ) continue;; + NONE | '' ) case $ac_var in *prefix ) continue;; esac;; + esac +- { $as_echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 ++ { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 + { (exit 1); exit 1; }; } + done + +@@ -1524,7 +1412,7 @@ + if test "x$host_alias" != x; then + if test "x$build_alias" = x; then + cross_compiling=maybe +- $as_echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. ++ echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. + If a cross compiler is detected then cross compile mode will be used." >&2 + elif test "x$build_alias" != "x$host_alias"; then + cross_compiling=yes +@@ -1540,10 +1428,10 @@ + ac_pwd=`pwd` && test -n "$ac_pwd" && + ac_ls_di=`ls -di .` && + ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || +- { $as_echo "$as_me: error: Working directory cannot be determined" >&2 ++ { echo "$as_me: error: Working directory cannot be determined" >&2 + { (exit 1); exit 1; }; } + test "X$ac_ls_di" = "X$ac_pwd_ls_di" || +- { $as_echo "$as_me: error: pwd does not report name of working directory" >&2 ++ { echo "$as_me: error: pwd does not report name of working directory" >&2 + { (exit 1); exit 1; }; } + + +@@ -1551,12 +1439,12 @@ + if test -z "$srcdir"; then + ac_srcdir_defaulted=yes + # Try the directory containing this script, then the parent directory. +- ac_confdir=`$as_dirname -- "$as_myself" || +-$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ +- X"$as_myself" : 'X\(//\)[^/]' \| \ +- X"$as_myself" : 'X\(//\)$' \| \ +- X"$as_myself" : 'X\(/\)' \| . 2>/dev/null || +-$as_echo X"$as_myself" | ++ ac_confdir=`$as_dirname -- "$0" || ++$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ ++ X"$0" : 'X\(//\)[^/]' \| \ ++ X"$0" : 'X\(//\)$' \| \ ++ X"$0" : 'X\(/\)' \| . 2>/dev/null || ++echo X"$0" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q +@@ -1583,12 +1471,12 @@ + fi + if test ! -r "$srcdir/$ac_unique_file"; then + test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." +- { $as_echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 ++ { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 + { (exit 1); exit 1; }; } + fi + ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" + ac_abs_confdir=`( +- cd "$srcdir" && test -r "./$ac_unique_file" || { $as_echo "$as_me: error: $ac_msg" >&2 ++ cd "$srcdir" && test -r "./$ac_unique_file" || { echo "$as_me: error: $ac_msg" >&2 + { (exit 1); exit 1; }; } + pwd)` + # When building in place, set srcdir=. +@@ -1637,9 +1525,9 @@ + + Installation directories: + --prefix=PREFIX install architecture-independent files in PREFIX +- [$ac_default_prefix] ++ [$ac_default_prefix] + --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX +- [PREFIX] ++ [PREFIX] + + By default, \`make install' will install all the files in + \`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify +@@ -1649,25 +1537,25 @@ + For better control, use the options below. + + Fine tuning of the installation directories: +- --bindir=DIR user executables [EPREFIX/bin] +- --sbindir=DIR system admin executables [EPREFIX/sbin] +- --libexecdir=DIR program executables [EPREFIX/libexec] +- --sysconfdir=DIR read-only single-machine data [PREFIX/etc] +- --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] +- --localstatedir=DIR modifiable single-machine data [PREFIX/var] +- --libdir=DIR object code libraries [EPREFIX/lib] +- --includedir=DIR C header files [PREFIX/include] +- --oldincludedir=DIR C header files for non-gcc [/usr/include] +- --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] +- --datadir=DIR read-only architecture-independent data [DATAROOTDIR] +- --infodir=DIR info documentation [DATAROOTDIR/info] +- --localedir=DIR locale-dependent data [DATAROOTDIR/locale] +- --mandir=DIR man documentation [DATAROOTDIR/man] +- --docdir=DIR documentation root [DATAROOTDIR/doc/gnome-session] +- --htmldir=DIR html documentation [DOCDIR] +- --dvidir=DIR dvi documentation [DOCDIR] +- --pdfdir=DIR pdf documentation [DOCDIR] +- --psdir=DIR ps documentation [DOCDIR] ++ --bindir=DIR user executables [EPREFIX/bin] ++ --sbindir=DIR system admin executables [EPREFIX/sbin] ++ --libexecdir=DIR program executables [EPREFIX/libexec] ++ --sysconfdir=DIR read-only single-machine data [PREFIX/etc] ++ --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] ++ --localstatedir=DIR modifiable single-machine data [PREFIX/var] ++ --libdir=DIR object code libraries [EPREFIX/lib] ++ --includedir=DIR C header files [PREFIX/include] ++ --oldincludedir=DIR C header files for non-gcc [/usr/include] ++ --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] ++ --datadir=DIR read-only architecture-independent data [DATAROOTDIR] ++ --infodir=DIR info documentation [DATAROOTDIR/info] ++ --localedir=DIR locale-dependent data [DATAROOTDIR/locale] ++ --mandir=DIR man documentation [DATAROOTDIR/man] ++ --docdir=DIR documentation root [DATAROOTDIR/doc/gnome-session] ++ --htmldir=DIR html documentation [DOCDIR] ++ --dvidir=DIR dvi documentation [DOCDIR] ++ --pdfdir=DIR pdf documentation [DOCDIR] ++ --psdir=DIR ps documentation [DOCDIR] + _ACEOF + + cat <<\_ACEOF +@@ -1694,7 +1582,6 @@ + cat <<\_ACEOF + + Optional Features: +- --disable-option-checking ignore unrecognized --enable/--with options + --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) + --enable-FEATURE[=ARG] include FEATURE [ARG=yes] + --enable-maintainer-mode enable make rules and dependencies not useful +@@ -1721,10 +1608,9 @@ + Optional Packages: + --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] + --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) +- --with-gnu-ld assume the C compiler uses GNU ld [default=no] + --with-pic try to use only PIC/non-PIC objects [default=use + both] +- --with-tags[=TAGS] include additional configurations [automatic] ++ --with-gnu-ld assume the C compiler uses GNU ld [default=no] + --with-at-spi-registryd-directory + Specify the directory of at-spi-registryd + [default=libexecdir] +@@ -1743,11 +1629,6 @@ + CPPFLAGS C/C++/Objective C preprocessor flags, e.g. -I if + you have headers in a nonstandard directory + CPP C preprocessor +- CXX C++ compiler command +- CXXFLAGS C++ compiler flags +- CXXCPP C++ preprocessor +- F77 Fortran 77 compiler command +- FFLAGS Fortran 77 compiler flags + PKG_CONFIG path to pkg-config utility + GNOME_SESSION_CFLAGS + C compiler flags for GNOME_SESSION, overriding pkg-config +@@ -1802,17 +1683,15 @@ + if test "$ac_init_help" = "recursive"; then + # If there are subdirs, report their specific --help. + for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue +- test -d "$ac_dir" || +- { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } || +- continue ++ test -d "$ac_dir" || continue + ac_builddir=. + + case "$ac_dir" in + .) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) +- ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` ++ ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` + # A ".." for each directory in $ac_dir_suffix. +- ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` ++ ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'` + case $ac_top_builddir_sub in + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; +@@ -1848,7 +1727,7 @@ + echo && + $SHELL "$ac_srcdir/configure" --help=recursive + else +- $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 ++ echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 + fi || ac_status=$? + cd "$ac_pwd" || { ac_status=$?; break; } + done +@@ -1858,10 +1737,10 @@ + if $ac_init_version; then + cat <<\_ACEOF + gnome-session configure 2.25.90 +-generated by GNU Autoconf 2.62 ++generated by GNU Autoconf 2.61 + + Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, +-2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. ++2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc. + This configure script is free software; the Free Software Foundation + gives unlimited permission to copy, distribute and modify it. + _ACEOF +@@ -1872,7 +1751,7 @@ + running configure, to aid debugging if configure makes a mistake. + + It was created by gnome-session $as_me 2.25.90, which was +-generated by GNU Autoconf 2.62. Invocation command line was ++generated by GNU Autoconf 2.61. Invocation command line was + + $ $0 $@ + +@@ -1908,7 +1787,7 @@ + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- $as_echo "PATH: $as_dir" ++ echo "PATH: $as_dir" + done + IFS=$as_save_IFS + +@@ -1943,7 +1822,7 @@ + | -silent | --silent | --silen | --sile | --sil) + continue ;; + *\'*) +- ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; ++ ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + case $ac_pass in + 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;; +@@ -1995,12 +1874,11 @@ + case $ac_val in #( + *${as_nl}*) + case $ac_var in #( +- *_cv_*) { $as_echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5 +-$as_echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;; ++ *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5 ++echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;; + esac + case $ac_var in #( + _ | IFS | as_nl) ;; #( +- BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( + *) $as_unset $ac_var ;; + esac ;; + esac +@@ -2030,9 +1908,9 @@ + do + eval ac_val=\$$ac_var + case $ac_val in +- *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; ++ *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; + esac +- $as_echo "$ac_var='\''$ac_val'\''" ++ echo "$ac_var='\''$ac_val'\''" + done | sort + echo + +@@ -2047,9 +1925,9 @@ + do + eval ac_val=\$$ac_var + case $ac_val in +- *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; ++ *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; + esac +- $as_echo "$ac_var='\''$ac_val'\''" ++ echo "$ac_var='\''$ac_val'\''" + done | sort + echo + fi +@@ -2065,8 +1943,8 @@ + echo + fi + test "$ac_signal" != 0 && +- $as_echo "$as_me: caught signal $ac_signal" +- $as_echo "$as_me: exit $exit_status" ++ echo "$as_me: caught signal $ac_signal" ++ echo "$as_me: exit $exit_status" + } >&5 + rm -f core *.core core.conftest.* && + rm -f -r conftest* confdefs* conf$$* $ac_clean_files && +@@ -2108,24 +1986,21 @@ + + + # Let the site file select an alternate cache file if it wants to. +-# Prefer an explicitly selected file to automatically selected ones. +-ac_site_file1=NONE +-ac_site_file2=NONE ++# Prefer explicitly selected file to automatically selected ones. + if test -n "$CONFIG_SITE"; then +- ac_site_file1=$CONFIG_SITE ++ set x "$CONFIG_SITE" + elif test "x$prefix" != xNONE; then +- ac_site_file1=$prefix/share/config.site +- ac_site_file2=$prefix/etc/config.site ++ set x "$prefix/share/config.site" "$prefix/etc/config.site" + else +- ac_site_file1=$ac_default_prefix/share/config.site +- ac_site_file2=$ac_default_prefix/etc/config.site ++ set x "$ac_default_prefix/share/config.site" \ ++ "$ac_default_prefix/etc/config.site" + fi +-for ac_site_file in "$ac_site_file1" "$ac_site_file2" ++shift ++for ac_site_file + do +- test "x$ac_site_file" = xNONE && continue + if test -r "$ac_site_file"; then +- { $as_echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 +-$as_echo "$as_me: loading site script $ac_site_file" >&6;} ++ { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 ++echo "$as_me: loading site script $ac_site_file" >&6;} + sed 's/^/| /' "$ac_site_file" >&5 + . "$ac_site_file" + fi +@@ -2135,16 +2010,16 @@ + # Some versions of bash will fail to source /dev/null (special + # files actually), so we avoid doing that. + if test -f "$cache_file"; then +- { $as_echo "$as_me:$LINENO: loading cache $cache_file" >&5 +-$as_echo "$as_me: loading cache $cache_file" >&6;} ++ { echo "$as_me:$LINENO: loading cache $cache_file" >&5 ++echo "$as_me: loading cache $cache_file" >&6;} + case $cache_file in + [\\/]* | ?:[\\/]* ) . "$cache_file";; + *) . "./$cache_file";; + esac + fi + else +- { $as_echo "$as_me:$LINENO: creating cache $cache_file" >&5 +-$as_echo "$as_me: creating cache $cache_file" >&6;} ++ { echo "$as_me:$LINENO: creating cache $cache_file" >&5 ++echo "$as_me: creating cache $cache_file" >&6;} + >$cache_file + fi + +@@ -2158,38 +2033,29 @@ + eval ac_new_val=\$ac_env_${ac_var}_value + case $ac_old_set,$ac_new_set in + set,) +- { $as_echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 +-$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} ++ { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 ++echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,set) +- { $as_echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5 +-$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} ++ { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5 ++echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,);; + *) + if test "x$ac_old_val" != "x$ac_new_val"; then +- # differences in whitespace do not lead to failure. +- ac_old_val_w=`echo x $ac_old_val` +- ac_new_val_w=`echo x $ac_new_val` +- if test "$ac_old_val_w" != "$ac_new_val_w"; then +- { $as_echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 +-$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} +- ac_cache_corrupted=: +- else +- { $as_echo "$as_me:$LINENO: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 +-$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} +- eval $ac_var=\$ac_old_val +- fi +- { $as_echo "$as_me:$LINENO: former value: \`$ac_old_val'" >&5 +-$as_echo "$as_me: former value: \`$ac_old_val'" >&2;} +- { $as_echo "$as_me:$LINENO: current value: \`$ac_new_val'" >&5 +-$as_echo "$as_me: current value: \`$ac_new_val'" >&2;} ++ { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 ++echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} ++ { echo "$as_me:$LINENO: former value: $ac_old_val" >&5 ++echo "$as_me: former value: $ac_old_val" >&2;} ++ { echo "$as_me:$LINENO: current value: $ac_new_val" >&5 ++echo "$as_me: current value: $ac_new_val" >&2;} ++ ac_cache_corrupted=: + fi;; + esac + # Pass precious variables to config.status. + if test "$ac_new_set" = set; then + case $ac_new_val in +- *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; ++ *\'*) ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; + *) ac_arg=$ac_var=$ac_new_val ;; + esac + case " $ac_configure_args " in +@@ -2199,10 +2065,10 @@ + fi + done + if $ac_cache_corrupted; then +- { $as_echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5 +-$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} +- { { $as_echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5 +-$as_echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;} ++ { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5 ++echo "$as_me: error: changes in the environment can compromise the build" >&2;} ++ { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5 ++echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;} + { (exit 1); exit 1; }; } + fi + +@@ -2260,8 +2126,8 @@ + fi + done + if test -z "$ac_aux_dir"; then +- { { $as_echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&5 +-$as_echo "$as_me: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&2;} ++ { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&5 ++echo "$as_me: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&2;} + { (exit 1); exit 1; }; } + fi + +@@ -2287,12 +2153,11 @@ + # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" + # OS/2's system install, which has a completely different semantic + # ./install, which can be erroneously created by make from ./install.sh. +-# Reject install programs that cannot install multiple files. +-{ $as_echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 +-$as_echo_n "checking for a BSD-compatible install... " >&6; } ++{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 ++echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; } + if test -z "$INSTALL"; then + if test "${ac_cv_path_install+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + for as_dir in $PATH +@@ -2321,29 +2186,17 @@ + # program-specific install script used by HP pwplus--don't use. + : + else +- rm -rf conftest.one conftest.two conftest.dir +- echo one > conftest.one +- echo two > conftest.two +- mkdir conftest.dir +- if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" && +- test -s conftest.one && test -s conftest.two && +- test -s conftest.dir/conftest.one && +- test -s conftest.dir/conftest.two +- then +- ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" +- break 3 +- fi ++ ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" ++ break 3 + fi + fi + done + done + ;; + esac +- + done + IFS=$as_save_IFS + +-rm -rf conftest.one conftest.two conftest.dir + + fi + if test "${ac_cv_path_install+set}" = set; then +@@ -2356,8 +2209,8 @@ + INSTALL=$ac_install_sh + fi + fi +-{ $as_echo "$as_me:$LINENO: result: $INSTALL" >&5 +-$as_echo "$INSTALL" >&6; } ++{ echo "$as_me:$LINENO: result: $INSTALL" >&5 ++echo "${ECHO_T}$INSTALL" >&6; } + + # Use test -z because SunOS4 sh mishandles braces in ${var-val}. + # It thinks the first close brace ends the variable substitution. +@@ -2367,8 +2220,8 @@ + + test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' + +-{ $as_echo "$as_me:$LINENO: checking whether build environment is sane" >&5 +-$as_echo_n "checking whether build environment is sane... " >&6; } ++{ echo "$as_me:$LINENO: checking whether build environment is sane" >&5 ++echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6; } + # Just in case + sleep 1 + echo timestamp > conftest.file +@@ -2391,9 +2244,9 @@ + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". +- { { $as_echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken ++ { { echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken + alias in your environment" >&5 +-$as_echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken ++echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken + alias in your environment" >&2;} + { (exit 1); exit 1; }; } + fi +@@ -2404,23 +2257,26 @@ + # Ok. + : + else +- { { $as_echo "$as_me:$LINENO: error: newly created file is older than distributed files! ++ { { echo "$as_me:$LINENO: error: newly created file is older than distributed files! + Check your system clock" >&5 +-$as_echo "$as_me: error: newly created file is older than distributed files! ++echo "$as_me: error: newly created file is older than distributed files! + Check your system clock" >&2;} + { (exit 1); exit 1; }; } + fi +-{ $as_echo "$as_me:$LINENO: result: yes" >&5 +-$as_echo "yes" >&6; } ++{ echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } + test "$program_prefix" != NONE && + program_transform_name="s&^&$program_prefix&;$program_transform_name" + # Use a double $ so make ignores it. + test "$program_suffix" != NONE && + program_transform_name="s&\$&$program_suffix&;$program_transform_name" +-# Double any \ or $. ++# Double any \ or $. echo might interpret backslashes. + # By default was `s,x,x', remove it if useless. +-ac_script='s/[\\$]/&&/g;s/;s,x,x,$//' +-program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"` ++cat <<\_ACEOF >conftest.sed ++s/[\\$]/&&/g;s/;s,x,x,$// ++_ACEOF ++program_transform_name=`echo $program_transform_name | sed -f conftest.sed` ++rm -f conftest.sed + + # expand $ac_aux_dir to an absolute path + am_aux_dir=`cd $ac_aux_dir && pwd` +@@ -2431,15 +2287,15 @@ + am_missing_run="$MISSING --run " + else + am_missing_run= +- { $as_echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5 +-$as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;} ++ { echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5 ++echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;} + fi + +-{ $as_echo "$as_me:$LINENO: checking for a thread-safe mkdir -p" >&5 +-$as_echo_n "checking for a thread-safe mkdir -p... " >&6; } ++{ echo "$as_me:$LINENO: checking for a thread-safe mkdir -p" >&5 ++echo $ECHO_N "checking for a thread-safe mkdir -p... $ECHO_C" >&6; } + if test -z "$MKDIR_P"; then + if test "${ac_cv_path_mkdir+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin +@@ -2474,8 +2330,8 @@ + MKDIR_P="$ac_install_sh -d" + fi + fi +-{ $as_echo "$as_me:$LINENO: result: $MKDIR_P" >&5 +-$as_echo "$MKDIR_P" >&6; } ++{ echo "$as_me:$LINENO: result: $MKDIR_P" >&5 ++echo "${ECHO_T}$MKDIR_P" >&6; } + + mkdir_p="$MKDIR_P" + case $mkdir_p in +@@ -2487,10 +2343,10 @@ + do + # Extract the first word of "$ac_prog", so it can be a program name with args. + set dummy $ac_prog; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_AWK+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + if test -n "$AWK"; then + ac_cv_prog_AWK="$AWK" # Let the user override the test. +@@ -2503,7 +2359,7 @@ + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_AWK="$ac_prog" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +@@ -2514,23 +2370,22 @@ + fi + AWK=$ac_cv_prog_AWK + if test -n "$AWK"; then +- { $as_echo "$as_me:$LINENO: result: $AWK" >&5 +-$as_echo "$AWK" >&6; } ++ { echo "$as_me:$LINENO: result: $AWK" >&5 ++echo "${ECHO_T}$AWK" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + + + test -n "$AWK" && break + done + +-{ $as_echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 +-$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } +-set x ${MAKE-make} +-ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` ++{ echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 ++echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6; } ++set x ${MAKE-make}; ac_make=`echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` + if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + cat >conftest.make <<\_ACEOF + SHELL = /bin/sh +@@ -2547,12 +2402,12 @@ + rm -f conftest.make + fi + if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then +- { $as_echo "$as_me:$LINENO: result: yes" >&5 +-$as_echo "yes" >&6; } ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } + SET_MAKE= + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + SET_MAKE="MAKE=${MAKE-make}" + fi + +@@ -2571,8 +2426,8 @@ + am__isrc=' -I$(srcdir)' + # test to see if srcdir already configured + if test -f $srcdir/config.status; then +- { { $as_echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5 +-$as_echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;} ++ { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5 ++echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;} + { (exit 1); exit 1; }; } + fi + fi +@@ -2627,10 +2482,10 @@ + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. + set dummy ${ac_tool_prefix}strip; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_STRIP+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + if test -n "$STRIP"; then + ac_cv_prog_STRIP="$STRIP" # Let the user override the test. +@@ -2643,7 +2498,7 @@ + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_STRIP="${ac_tool_prefix}strip" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +@@ -2654,11 +2509,11 @@ + fi + STRIP=$ac_cv_prog_STRIP + if test -n "$STRIP"; then +- { $as_echo "$as_me:$LINENO: result: $STRIP" >&5 +-$as_echo "$STRIP" >&6; } ++ { echo "$as_me:$LINENO: result: $STRIP" >&5 ++echo "${ECHO_T}$STRIP" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + + +@@ -2667,10 +2522,10 @@ + ac_ct_STRIP=$STRIP + # Extract the first word of "strip", so it can be a program name with args. + set dummy strip; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + if test -n "$ac_ct_STRIP"; then + ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. +@@ -2683,7 +2538,7 @@ + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_STRIP="strip" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +@@ -2694,11 +2549,11 @@ + fi + ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP + if test -n "$ac_ct_STRIP"; then +- { $as_echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 +-$as_echo "$ac_ct_STRIP" >&6; } ++ { echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 ++echo "${ECHO_T}$ac_ct_STRIP" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + + if test "x$ac_ct_STRIP" = x; then +@@ -2706,10 +2561,10 @@ + else + case $cross_compiling:$ac_tool_warned in + yes:) +-{ $as_echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools + whose name does not start with the host triplet. If you think this + configuration is useful to you, please write to autoconf@gnu.org." >&5 +-$as_echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools + whose name does not start with the host triplet. If you think this + configuration is useful to you, please write to autoconf@gnu.org." >&2;} + ac_tool_warned=yes ;; +@@ -2736,8 +2591,8 @@ + + + +-{ $as_echo "$as_me:$LINENO: checking whether to enable maintainer-specific portions of Makefiles" >&5 +-$as_echo_n "checking whether to enable maintainer-specific portions of Makefiles... " >&6; } ++{ echo "$as_me:$LINENO: checking whether to enable maintainer-specific portions of Makefiles" >&5 ++echo $ECHO_N "checking whether to enable maintainer-specific portions of Makefiles... $ECHO_C" >&6; } + # Check whether --enable-maintainer-mode was given. + if test "${enable_maintainer_mode+set}" = set; then + enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval +@@ -2745,8 +2600,8 @@ + USE_MAINTAINER_MODE=no + fi + +- { $as_echo "$as_me:$LINENO: result: $USE_MAINTAINER_MODE" >&5 +-$as_echo "$USE_MAINTAINER_MODE" >&6; } ++ { echo "$as_me:$LINENO: result: $USE_MAINTAINER_MODE" >&5 ++echo "${ECHO_T}$USE_MAINTAINER_MODE" >&6; } + if test $USE_MAINTAINER_MODE = yes; then + MAINTAINER_MODE_TRUE= + MAINTAINER_MODE_FALSE='#' +@@ -2788,8 +2643,8 @@ + + + +- { $as_echo "$as_me:$LINENO: checking whether NLS is requested" >&5 +-$as_echo_n "checking whether NLS is requested... " >&6; } ++ { echo "$as_me:$LINENO: checking whether NLS is requested" >&5 ++echo $ECHO_N "checking whether NLS is requested... $ECHO_C" >&6; } + # Check whether --enable-nls was given. + if test "${enable_nls+set}" = set; then + enableval=$enable_nls; USE_NLS=$enableval +@@ -2797,8 +2652,8 @@ + USE_NLS=yes + fi + +- { $as_echo "$as_me:$LINENO: result: $USE_NLS" >&5 +-$as_echo "$USE_NLS" >&6; } ++ { echo "$as_me:$LINENO: result: $USE_NLS" >&5 ++echo "${ECHO_T}$USE_NLS" >&6; } + + + DEPDIR="${am__leading_dot}deps" +@@ -2813,8 +2668,8 @@ + .PHONY: am__doit + END + # If we don't find an include directive, just comment out the code. +-{ $as_echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5 +-$as_echo_n "checking for style of include used by $am_make... " >&6; } ++{ echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5 ++echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6; } + am__include="#" + am__quote= + _am_result=none +@@ -2841,8 +2696,8 @@ + fi + + +-{ $as_echo "$as_me:$LINENO: result: $_am_result" >&5 +-$as_echo "$_am_result" >&6; } ++{ echo "$as_me:$LINENO: result: $_am_result" >&5 ++echo "${ECHO_T}$_am_result" >&6; } + rm -f confinc confmf + + # Check whether --enable-dependency-tracking was given. +@@ -2871,10 +2726,10 @@ + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. + set dummy ${ac_tool_prefix}gcc; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_CC+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +@@ -2887,7 +2742,7 @@ + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_CC="${ac_tool_prefix}gcc" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +@@ -2898,11 +2753,11 @@ + fi + CC=$ac_cv_prog_CC + if test -n "$CC"; then +- { $as_echo "$as_me:$LINENO: result: $CC" >&5 +-$as_echo "$CC" >&6; } ++ { echo "$as_me:$LINENO: result: $CC" >&5 ++echo "${ECHO_T}$CC" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + + +@@ -2911,10 +2766,10 @@ + ac_ct_CC=$CC + # Extract the first word of "gcc", so it can be a program name with args. + set dummy gcc; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_ac_ct_CC+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +@@ -2927,7 +2782,7 @@ + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_CC="gcc" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +@@ -2938,11 +2793,11 @@ + fi + ac_ct_CC=$ac_cv_prog_ac_ct_CC + if test -n "$ac_ct_CC"; then +- { $as_echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +-$as_echo "$ac_ct_CC" >&6; } ++ { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 ++echo "${ECHO_T}$ac_ct_CC" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + + if test "x$ac_ct_CC" = x; then +@@ -2950,10 +2805,10 @@ + else + case $cross_compiling:$ac_tool_warned in + yes:) +-{ $as_echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools + whose name does not start with the host triplet. If you think this + configuration is useful to you, please write to autoconf@gnu.org." >&5 +-$as_echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools + whose name does not start with the host triplet. If you think this + configuration is useful to you, please write to autoconf@gnu.org." >&2;} + ac_tool_warned=yes ;; +@@ -2968,10 +2823,10 @@ + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. + set dummy ${ac_tool_prefix}cc; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_CC+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +@@ -2984,7 +2839,7 @@ + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_CC="${ac_tool_prefix}cc" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +@@ -2995,11 +2850,11 @@ + fi + CC=$ac_cv_prog_CC + if test -n "$CC"; then +- { $as_echo "$as_me:$LINENO: result: $CC" >&5 +-$as_echo "$CC" >&6; } ++ { echo "$as_me:$LINENO: result: $CC" >&5 ++echo "${ECHO_T}$CC" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + + +@@ -3008,10 +2863,10 @@ + if test -z "$CC"; then + # Extract the first word of "cc", so it can be a program name with args. + set dummy cc; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_CC+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +@@ -3029,7 +2884,7 @@ + continue + fi + ac_cv_prog_CC="cc" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +@@ -3052,11 +2907,11 @@ + fi + CC=$ac_cv_prog_CC + if test -n "$CC"; then +- { $as_echo "$as_me:$LINENO: result: $CC" >&5 +-$as_echo "$CC" >&6; } ++ { echo "$as_me:$LINENO: result: $CC" >&5 ++echo "${ECHO_T}$CC" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + + +@@ -3067,10 +2922,10 @@ + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. + set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_CC+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +@@ -3083,7 +2938,7 @@ + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_CC="$ac_tool_prefix$ac_prog" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +@@ -3094,11 +2949,11 @@ + fi + CC=$ac_cv_prog_CC + if test -n "$CC"; then +- { $as_echo "$as_me:$LINENO: result: $CC" >&5 +-$as_echo "$CC" >&6; } ++ { echo "$as_me:$LINENO: result: $CC" >&5 ++echo "${ECHO_T}$CC" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + + +@@ -3111,10 +2966,10 @@ + do + # Extract the first word of "$ac_prog", so it can be a program name with args. + set dummy $ac_prog; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_ac_ct_CC+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +@@ -3127,7 +2982,7 @@ + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_CC="$ac_prog" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +@@ -3138,11 +2993,11 @@ + fi + ac_ct_CC=$ac_cv_prog_ac_ct_CC + if test -n "$ac_ct_CC"; then +- { $as_echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +-$as_echo "$ac_ct_CC" >&6; } ++ { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 ++echo "${ECHO_T}$ac_ct_CC" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + + +@@ -3154,10 +3009,10 @@ + else + case $cross_compiling:$ac_tool_warned in + yes:) +-{ $as_echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools + whose name does not start with the host triplet. If you think this + configuration is useful to you, please write to autoconf@gnu.org." >&5 +-$as_echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools + whose name does not start with the host triplet. If you think this + configuration is useful to you, please write to autoconf@gnu.org." >&2;} + ac_tool_warned=yes ;; +@@ -3169,48 +3024,44 @@ + fi + + +-test -z "$CC" && { { $as_echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH ++test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH + See \`config.log' for more details." >&5 +-$as_echo "$as_me: error: no acceptable C compiler found in \$PATH ++echo "$as_me: error: no acceptable C compiler found in \$PATH + See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } + + # Provide some information about the compiler. +-$as_echo "$as_me:$LINENO: checking for C compiler version" >&5 +-set X $ac_compile +-ac_compiler=$2 ++echo "$as_me:$LINENO: checking for C compiler version" >&5 ++ac_compiler=`set X $ac_compile; echo $2` + { (ac_try="$ac_compiler --version >&5" + case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compiler --version >&5") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } + { (ac_try="$ac_compiler -v >&5" + case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compiler -v >&5") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } + { (ac_try="$ac_compiler -V >&5" + case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compiler -V >&5") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } + + cat >conftest.$ac_ext <<_ACEOF +@@ -3229,22 +3080,27 @@ + } + _ACEOF + ac_clean_files_save=$ac_clean_files +-ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out" ++ac_clean_files="$ac_clean_files a.out a.exe b.out" + # Try to create an executable without -o first, disregard a.out. + # It will help us diagnose broken compilers, and finding out an intuition + # of exeext. +-{ $as_echo "$as_me:$LINENO: checking for C compiler default output file name" >&5 +-$as_echo_n "checking for C compiler default output file name... " >&6; } +-ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` +- +-# The possible output files: +-ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*" +- ++{ echo "$as_me:$LINENO: checking for C compiler default output file name" >&5 ++echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6; } ++ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` ++# ++# List of possible output files, starting from the most likely. ++# The algorithm is not robust to junk in `.', hence go to wildcards (a.*) ++# only as a last resort. b.out is created by i960 compilers. ++ac_files='a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out' ++# ++# The IRIX 6 linker writes into existing files which may not be ++# executable, retaining their permissions. Remove them first so a ++# subsequent execution test works. + ac_rmfiles= + for ac_file in $ac_files + do + case $ac_file in +- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; ++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;; + * ) ac_rmfiles="$ac_rmfiles $ac_file";; + esac + done +@@ -3255,11 +3111,10 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link_default") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. + # So ignore a value of `no', otherwise this would lead to `EXEEXT = no' +@@ -3270,7 +3125,7 @@ + do + test -f "$ac_file" || continue + case $ac_file in +- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) + ;; + [ab].out ) + # We found the default executable, but exeext='' is most +@@ -3297,15 +3152,15 @@ + ac_file='' + fi + +-{ $as_echo "$as_me:$LINENO: result: $ac_file" >&5 +-$as_echo "$ac_file" >&6; } ++{ echo "$as_me:$LINENO: result: $ac_file" >&5 ++echo "${ECHO_T}$ac_file" >&6; } + if test -z "$ac_file"; then +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-{ { $as_echo "$as_me:$LINENO: error: C compiler cannot create executables ++{ { echo "$as_me:$LINENO: error: C compiler cannot create executables + See \`config.log' for more details." >&5 +-$as_echo "$as_me: error: C compiler cannot create executables ++echo "$as_me: error: C compiler cannot create executables + See \`config.log' for more details." >&2;} + { (exit 77); exit 77; }; } + fi +@@ -3314,8 +3169,8 @@ + + # Check that the compiler produces executables we can run. If not, either + # the compiler is broken, or we cross compile. +-{ $as_echo "$as_me:$LINENO: checking whether the C compiler works" >&5 +-$as_echo_n "checking whether the C compiler works... " >&6; } ++{ echo "$as_me:$LINENO: checking whether the C compiler works" >&5 ++echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6; } + # FIXME: These cross compiler hacks should be removed for Autoconf 3.0 + # If not cross compiling, check that we can run a simple program. + if test "$cross_compiling" != yes; then +@@ -3324,51 +3179,49 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + cross_compiling=no + else + if test "$cross_compiling" = maybe; then + cross_compiling=yes + else +- { { $as_echo "$as_me:$LINENO: error: cannot run C compiled programs. ++ { { echo "$as_me:$LINENO: error: cannot run C compiled programs. + If you meant to cross compile, use \`--host'. + See \`config.log' for more details." >&5 +-$as_echo "$as_me: error: cannot run C compiled programs. ++echo "$as_me: error: cannot run C compiled programs. + If you meant to cross compile, use \`--host'. + See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } + fi + fi + fi +-{ $as_echo "$as_me:$LINENO: result: yes" >&5 +-$as_echo "yes" >&6; } ++{ echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } + +-rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out ++rm -f a.out a.exe conftest$ac_cv_exeext b.out + ac_clean_files=$ac_clean_files_save + # Check that the compiler produces executables we can run. If not, either + # the compiler is broken, or we cross compile. +-{ $as_echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 +-$as_echo_n "checking whether we are cross compiling... " >&6; } +-{ $as_echo "$as_me:$LINENO: result: $cross_compiling" >&5 +-$as_echo "$cross_compiling" >&6; } ++{ echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 ++echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6; } ++{ echo "$as_me:$LINENO: result: $cross_compiling" >&5 ++echo "${ECHO_T}$cross_compiling" >&6; } + +-{ $as_echo "$as_me:$LINENO: checking for suffix of executables" >&5 +-$as_echo_n "checking for suffix of executables... " >&6; } ++{ echo "$as_me:$LINENO: checking for suffix of executables" >&5 ++echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6; } + if { (ac_try="$ac_link" + case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + # If both `conftest.exe' and `conftest' are `present' (well, observable) + # catch `conftest.exe'. For instance with Cygwin, `ls conftest' will +@@ -3377,31 +3230,31 @@ + for ac_file in conftest.exe conftest conftest.*; do + test -f "$ac_file" || continue + case $ac_file in +- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; ++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;; + *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + break;; + * ) break;; + esac + done + else +- { { $as_echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link ++ { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link + See \`config.log' for more details." >&5 +-$as_echo "$as_me: error: cannot compute suffix of executables: cannot compile and link ++echo "$as_me: error: cannot compute suffix of executables: cannot compile and link + See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } + fi + + rm -f conftest$ac_cv_exeext +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 +-$as_echo "$ac_cv_exeext" >&6; } ++{ echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 ++echo "${ECHO_T}$ac_cv_exeext" >&6; } + + rm -f conftest.$ac_ext + EXEEXT=$ac_cv_exeext + ac_exeext=$EXEEXT +-{ $as_echo "$as_me:$LINENO: checking for suffix of object files" >&5 +-$as_echo_n "checking for suffix of object files... " >&6; } ++{ echo "$as_me:$LINENO: checking for suffix of object files" >&5 ++echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6; } + if test "${ac_cv_objext+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ +@@ -3424,41 +3277,40 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + for ac_file in conftest.o conftest.obj conftest.*; do + test -f "$ac_file" || continue; + case $ac_file in +- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; ++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf ) ;; + *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` + break;; + esac + done + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-{ { $as_echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile ++{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile + See \`config.log' for more details." >&5 +-$as_echo "$as_me: error: cannot compute suffix of object files: cannot compile ++echo "$as_me: error: cannot compute suffix of object files: cannot compile + See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } + fi + + rm -f conftest.$ac_cv_objext conftest.$ac_ext + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 +-$as_echo "$ac_cv_objext" >&6; } ++{ echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 ++echo "${ECHO_T}$ac_cv_objext" >&6; } + OBJEXT=$ac_cv_objext + ac_objext=$OBJEXT +-{ $as_echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 +-$as_echo_n "checking whether we are using the GNU C compiler... " >&6; } ++{ echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 ++echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6; } + if test "${ac_cv_c_compiler_gnu+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ +@@ -3484,21 +3336,20 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_compiler_gnu=yes + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + ac_compiler_gnu=no +@@ -3508,19 +3359,15 @@ + ac_cv_c_compiler_gnu=$ac_compiler_gnu + + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 +-$as_echo "$ac_cv_c_compiler_gnu" >&6; } +-if test $ac_compiler_gnu = yes; then +- GCC=yes +-else +- GCC= +-fi ++{ echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 ++echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6; } ++GCC=`test $ac_compiler_gnu = yes && echo yes` + ac_test_CFLAGS=${CFLAGS+set} + ac_save_CFLAGS=$CFLAGS +-{ $as_echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 +-$as_echo_n "checking whether $CC accepts -g... " >&6; } ++{ echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 ++echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6; } + if test "${ac_cv_prog_cc_g+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + ac_save_c_werror_flag=$ac_c_werror_flag + ac_c_werror_flag=yes +@@ -3547,21 +3394,20 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_cv_prog_cc_g=yes + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + CFLAGS="" +@@ -3586,21 +3432,20 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + : + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + ac_c_werror_flag=$ac_save_c_werror_flag +@@ -3626,21 +3471,20 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_cv_prog_cc_g=yes + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + +@@ -3655,8 +3499,8 @@ + rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + ac_c_werror_flag=$ac_save_c_werror_flag + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 +-$as_echo "$ac_cv_prog_cc_g" >&6; } ++{ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 ++echo "${ECHO_T}$ac_cv_prog_cc_g" >&6; } + if test "$ac_test_CFLAGS" = set; then + CFLAGS=$ac_save_CFLAGS + elif test $ac_cv_prog_cc_g = yes; then +@@ -3672,10 +3516,10 @@ + CFLAGS= + fi + fi +-{ $as_echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5 +-$as_echo_n "checking for $CC option to accept ISO C89... " >&6; } ++{ echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5 ++echo $ECHO_N "checking for $CC option to accept ISO C89... $ECHO_C" >&6; } + if test "${ac_cv_prog_cc_c89+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + ac_cv_prog_cc_c89=no + ac_save_CC=$CC +@@ -3746,21 +3590,20 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_cv_prog_cc_c89=$ac_arg + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + +@@ -3776,15 +3619,15 @@ + # AC_CACHE_VAL + case "x$ac_cv_prog_cc_c89" in + x) +- { $as_echo "$as_me:$LINENO: result: none needed" >&5 +-$as_echo "none needed" >&6; } ;; ++ { echo "$as_me:$LINENO: result: none needed" >&5 ++echo "${ECHO_T}none needed" >&6; } ;; + xno) +- { $as_echo "$as_me:$LINENO: result: unsupported" >&5 +-$as_echo "unsupported" >&6; } ;; ++ { echo "$as_me:$LINENO: result: unsupported" >&5 ++echo "${ECHO_T}unsupported" >&6; } ;; + *) + CC="$CC $ac_cv_prog_cc_c89" +- { $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5 +-$as_echo "$ac_cv_prog_cc_c89" >&6; } ;; ++ { echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5 ++echo "${ECHO_T}$ac_cv_prog_cc_c89" >&6; } ;; + esac + + +@@ -3796,10 +3639,10 @@ + + depcc="$CC" am_compiler_list= + +-{ $as_echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 +-$as_echo_n "checking dependency style of $depcc... " >&6; } ++{ echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 ++echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6; } + if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then + # We make a subdir and do the tests there. Otherwise we can end up +@@ -3887,8 +3730,8 @@ + fi + + fi +-{ $as_echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 +-$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } ++{ echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 ++echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6; } + CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type + + if +@@ -3907,8 +3750,8 @@ + + case "$am__api_version" in + 1.01234) +- { { $as_echo "$as_me:$LINENO: error: Automake 1.5 or newer is required to use intltool" >&5 +-$as_echo "$as_me: error: Automake 1.5 or newer is required to use intltool" >&2;} ++ { { echo "$as_me:$LINENO: error: Automake 1.5 or newer is required to use intltool" >&5 ++echo "$as_me: error: Automake 1.5 or newer is required to use intltool" >&2;} + { (exit 1); exit 1; }; } + ;; + *) +@@ -3916,27 +3759,27 @@ + esac + + if test -n "0.40.0"; then +- { $as_echo "$as_me:$LINENO: checking for intltool >= 0.40.0" >&5 +-$as_echo_n "checking for intltool >= 0.40.0... " >&6; } ++ { echo "$as_me:$LINENO: checking for intltool >= 0.40.0" >&5 ++echo $ECHO_N "checking for intltool >= 0.40.0... $ECHO_C" >&6; } + + INTLTOOL_REQUIRED_VERSION_AS_INT=`echo 0.40.0 | awk -F. '{ print $ 1 * 1000 + $ 2 * 100 + $ 3; }'` + INTLTOOL_APPLIED_VERSION=`intltool-update --version | head -1 | cut -d" " -f3` + INTLTOOL_APPLIED_VERSION_AS_INT=`echo $INTLTOOL_APPLIED_VERSION | awk -F. '{ print $ 1 * 1000 + $ 2 * 100 + $ 3; }'` + +- { $as_echo "$as_me:$LINENO: result: $INTLTOOL_APPLIED_VERSION found" >&5 +-$as_echo "$INTLTOOL_APPLIED_VERSION found" >&6; } ++ { echo "$as_me:$LINENO: result: $INTLTOOL_APPLIED_VERSION found" >&5 ++echo "${ECHO_T}$INTLTOOL_APPLIED_VERSION found" >&6; } + test "$INTLTOOL_APPLIED_VERSION_AS_INT" -ge "$INTLTOOL_REQUIRED_VERSION_AS_INT" || +- { { $as_echo "$as_me:$LINENO: error: Your intltool is too old. You need intltool 0.40.0 or later." >&5 +-$as_echo "$as_me: error: Your intltool is too old. You need intltool 0.40.0 or later." >&2;} ++ { { echo "$as_me:$LINENO: error: Your intltool is too old. You need intltool 0.40.0 or later." >&5 ++echo "$as_me: error: Your intltool is too old. You need intltool 0.40.0 or later." >&2;} + { (exit 1); exit 1; }; } + fi + + # Extract the first word of "intltool-update", so it can be a program name with args. + set dummy intltool-update; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_path_INTLTOOL_UPDATE+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + case $INTLTOOL_UPDATE in + [\\/]* | ?:[\\/]*) +@@ -3951,7 +3794,7 @@ + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_path_INTLTOOL_UPDATE="$as_dir/$ac_word$ac_exec_ext" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +@@ -3963,20 +3806,20 @@ + fi + INTLTOOL_UPDATE=$ac_cv_path_INTLTOOL_UPDATE + if test -n "$INTLTOOL_UPDATE"; then +- { $as_echo "$as_me:$LINENO: result: $INTLTOOL_UPDATE" >&5 +-$as_echo "$INTLTOOL_UPDATE" >&6; } ++ { echo "$as_me:$LINENO: result: $INTLTOOL_UPDATE" >&5 ++echo "${ECHO_T}$INTLTOOL_UPDATE" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + + + # Extract the first word of "intltool-merge", so it can be a program name with args. + set dummy intltool-merge; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_path_INTLTOOL_MERGE+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + case $INTLTOOL_MERGE in + [\\/]* | ?:[\\/]*) +@@ -3991,7 +3834,7 @@ + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_path_INTLTOOL_MERGE="$as_dir/$ac_word$ac_exec_ext" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +@@ -4003,20 +3846,20 @@ + fi + INTLTOOL_MERGE=$ac_cv_path_INTLTOOL_MERGE + if test -n "$INTLTOOL_MERGE"; then +- { $as_echo "$as_me:$LINENO: result: $INTLTOOL_MERGE" >&5 +-$as_echo "$INTLTOOL_MERGE" >&6; } ++ { echo "$as_me:$LINENO: result: $INTLTOOL_MERGE" >&5 ++echo "${ECHO_T}$INTLTOOL_MERGE" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + + + # Extract the first word of "intltool-extract", so it can be a program name with args. + set dummy intltool-extract; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_path_INTLTOOL_EXTRACT+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + case $INTLTOOL_EXTRACT in + [\\/]* | ?:[\\/]*) +@@ -4031,7 +3874,7 @@ + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_path_INTLTOOL_EXTRACT="$as_dir/$ac_word$ac_exec_ext" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +@@ -4043,17 +3886,17 @@ + fi + INTLTOOL_EXTRACT=$ac_cv_path_INTLTOOL_EXTRACT + if test -n "$INTLTOOL_EXTRACT"; then +- { $as_echo "$as_me:$LINENO: result: $INTLTOOL_EXTRACT" >&5 +-$as_echo "$INTLTOOL_EXTRACT" >&6; } ++ { echo "$as_me:$LINENO: result: $INTLTOOL_EXTRACT" >&5 ++echo "${ECHO_T}$INTLTOOL_EXTRACT" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + + + if test -z "$INTLTOOL_UPDATE" -o -z "$INTLTOOL_MERGE" -o -z "$INTLTOOL_EXTRACT"; then +- { { $as_echo "$as_me:$LINENO: error: The intltool scripts were not found. Please install intltool." >&5 +-$as_echo "$as_me: error: The intltool scripts were not found. Please install intltool." >&2;} ++ { { echo "$as_me:$LINENO: error: The intltool scripts were not found. Please install intltool." >&5 ++echo "$as_me: error: The intltool scripts were not found. Please install intltool." >&2;} + { (exit 1); exit 1; }; } + fi + +@@ -4097,89 +3940,13 @@ + + + +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- + # Check the gettext tools to make sure they are GNU + # Extract the first word of "xgettext", so it can be a program name with args. + set dummy xgettext; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_path_XGETTEXT+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + case $XGETTEXT in + [\\/]* | ?:[\\/]*) +@@ -4194,7 +3961,7 @@ + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_path_XGETTEXT="$as_dir/$ac_word$ac_exec_ext" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +@@ -4206,20 +3973,20 @@ + fi + XGETTEXT=$ac_cv_path_XGETTEXT + if test -n "$XGETTEXT"; then +- { $as_echo "$as_me:$LINENO: result: $XGETTEXT" >&5 +-$as_echo "$XGETTEXT" >&6; } ++ { echo "$as_me:$LINENO: result: $XGETTEXT" >&5 ++echo "${ECHO_T}$XGETTEXT" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + + + # Extract the first word of "msgmerge", so it can be a program name with args. + set dummy msgmerge; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_path_MSGMERGE+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + case $MSGMERGE in + [\\/]* | ?:[\\/]*) +@@ -4234,7 +4001,7 @@ + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_path_MSGMERGE="$as_dir/$ac_word$ac_exec_ext" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +@@ -4246,20 +4013,20 @@ + fi + MSGMERGE=$ac_cv_path_MSGMERGE + if test -n "$MSGMERGE"; then +- { $as_echo "$as_me:$LINENO: result: $MSGMERGE" >&5 +-$as_echo "$MSGMERGE" >&6; } ++ { echo "$as_me:$LINENO: result: $MSGMERGE" >&5 ++echo "${ECHO_T}$MSGMERGE" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + + + # Extract the first word of "msgfmt", so it can be a program name with args. + set dummy msgfmt; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_path_MSGFMT+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + case $MSGFMT in + [\\/]* | ?:[\\/]*) +@@ -4274,7 +4041,7 @@ + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_path_MSGFMT="$as_dir/$ac_word$ac_exec_ext" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +@@ -4286,20 +4053,20 @@ + fi + MSGFMT=$ac_cv_path_MSGFMT + if test -n "$MSGFMT"; then +- { $as_echo "$as_me:$LINENO: result: $MSGFMT" >&5 +-$as_echo "$MSGFMT" >&6; } ++ { echo "$as_me:$LINENO: result: $MSGFMT" >&5 ++echo "${ECHO_T}$MSGFMT" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + + + # Extract the first word of "gmsgfmt", so it can be a program name with args. + set dummy gmsgfmt; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_path_GMSGFMT+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + case $GMSGFMT in + [\\/]* | ?:[\\/]*) +@@ -4314,7 +4081,7 @@ + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_path_GMSGFMT="$as_dir/$ac_word$ac_exec_ext" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +@@ -4327,34 +4094,34 @@ + fi + GMSGFMT=$ac_cv_path_GMSGFMT + if test -n "$GMSGFMT"; then +- { $as_echo "$as_me:$LINENO: result: $GMSGFMT" >&5 +-$as_echo "$GMSGFMT" >&6; } ++ { echo "$as_me:$LINENO: result: $GMSGFMT" >&5 ++echo "${ECHO_T}$GMSGFMT" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + + + if test -z "$XGETTEXT" -o -z "$MSGMERGE" -o -z "$MSGFMT"; then +- { { $as_echo "$as_me:$LINENO: error: GNU gettext tools not found; required for intltool" >&5 +-$as_echo "$as_me: error: GNU gettext tools not found; required for intltool" >&2;} ++ { { echo "$as_me:$LINENO: error: GNU gettext tools not found; required for intltool" >&5 ++echo "$as_me: error: GNU gettext tools not found; required for intltool" >&2;} + { (exit 1); exit 1; }; } + fi + xgversion="`$XGETTEXT --version|grep '(GNU ' 2> /dev/null`" + mmversion="`$MSGMERGE --version|grep '(GNU ' 2> /dev/null`" + mfversion="`$MSGFMT --version|grep '(GNU ' 2> /dev/null`" + if test -z "$xgversion" -o -z "$mmversion" -o -z "$mfversion"; then +- { { $as_echo "$as_me:$LINENO: error: GNU gettext tools not found; required for intltool" >&5 +-$as_echo "$as_me: error: GNU gettext tools not found; required for intltool" >&2;} ++ { { echo "$as_me:$LINENO: error: GNU gettext tools not found; required for intltool" >&5 ++echo "$as_me: error: GNU gettext tools not found; required for intltool" >&2;} + { (exit 1); exit 1; }; } + fi + + # Extract the first word of "perl", so it can be a program name with args. + set dummy perl; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_path_INTLTOOL_PERL+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + case $INTLTOOL_PERL in + [\\/]* | ?:[\\/]*) +@@ -4369,7 +4136,7 @@ + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_path_INTLTOOL_PERL="$as_dir/$ac_word$ac_exec_ext" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +@@ -4381,40 +4148,33 @@ + fi + INTLTOOL_PERL=$ac_cv_path_INTLTOOL_PERL + if test -n "$INTLTOOL_PERL"; then +- { $as_echo "$as_me:$LINENO: result: $INTLTOOL_PERL" >&5 +-$as_echo "$INTLTOOL_PERL" >&6; } ++ { echo "$as_me:$LINENO: result: $INTLTOOL_PERL" >&5 ++echo "${ECHO_T}$INTLTOOL_PERL" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + + + if test -z "$INTLTOOL_PERL"; then +- { { $as_echo "$as_me:$LINENO: error: perl not found" >&5 +-$as_echo "$as_me: error: perl not found" >&2;} ++ { { echo "$as_me:$LINENO: error: perl not found; required for intltool" >&5 ++echo "$as_me: error: perl not found; required for intltool" >&2;} + { (exit 1); exit 1; }; } + fi +-{ $as_echo "$as_me:$LINENO: checking for perl >= 5.8.1" >&5 +-$as_echo_n "checking for perl >= 5.8.1... " >&6; } +-$INTLTOOL_PERL -e "use 5.8.1;" > /dev/null 2>&1 +-if test $? -ne 0; then +- { { $as_echo "$as_me:$LINENO: error: perl 5.8.1 is required for intltool" >&5 +-$as_echo "$as_me: error: perl 5.8.1 is required for intltool" >&2;} ++if test -z "`$INTLTOOL_PERL -v | fgrep '5.' 2> /dev/null`"; then ++ { { echo "$as_me:$LINENO: error: perl 5.x required for intltool" >&5 ++echo "$as_me: error: perl 5.x required for intltool" >&2;} + { (exit 1); exit 1; }; } +-else +- IT_PERL_VERSION="`$INTLTOOL_PERL -e \"printf '%vd', $^V\"`" +- { $as_echo "$as_me:$LINENO: result: $IT_PERL_VERSION" >&5 +-$as_echo "$IT_PERL_VERSION" >&6; } + fi + if test "x" != "xno-xml"; then +- { $as_echo "$as_me:$LINENO: checking for XML::Parser" >&5 +-$as_echo_n "checking for XML::Parser... " >&6; } ++ { echo "$as_me:$LINENO: checking for XML::Parser" >&5 ++echo $ECHO_N "checking for XML::Parser... $ECHO_C" >&6; } + if `$INTLTOOL_PERL -e "require XML::Parser" 2>/dev/null`; then +- { $as_echo "$as_me:$LINENO: result: ok" >&5 +-$as_echo "ok" >&6; } ++ { echo "$as_me:$LINENO: result: ok" >&5 ++echo "${ECHO_T}ok" >&6; } + else +- { { $as_echo "$as_me:$LINENO: error: XML::Parser perl module is required for intltool" >&5 +-$as_echo "$as_me: error: XML::Parser perl module is required for intltool" >&2;} ++ { { echo "$as_me:$LINENO: error: XML::Parser perl module is required for intltool" >&5 ++echo "$as_me: error: XML::Parser perl module is required for intltool" >&2;} + { (exit 1); exit 1; }; } + fi + fi +@@ -4447,32 +4207,29 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + DATADIRNAME=share + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + case $host in + *-*-solaris*) +- { $as_echo "$as_me:$LINENO: checking for bind_textdomain_codeset" >&5 +-$as_echo_n "checking for bind_textdomain_codeset... " >&6; } ++ { echo "$as_me:$LINENO: checking for bind_textdomain_codeset" >&5 ++echo $ECHO_N "checking for bind_textdomain_codeset... $ECHO_C" >&6; } + if test "${ac_cv_func_bind_textdomain_codeset+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ +@@ -4525,35 +4282,31 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + ac_cv_func_bind_textdomain_codeset=yes + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_func_bind_textdomain_codeset=no + fi + +-rm -rf conftest.dSYM + rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_bind_textdomain_codeset" >&5 +-$as_echo "$ac_cv_func_bind_textdomain_codeset" >&6; } ++{ echo "$as_me:$LINENO: result: $ac_cv_func_bind_textdomain_codeset" >&5 ++echo "${ECHO_T}$ac_cv_func_bind_textdomain_codeset" >&6; } + if test $ac_cv_func_bind_textdomain_codeset = yes; then + DATADIRNAME=share + else +@@ -4567,7 +4320,6 @@ + esac + fi + +-rm -rf conftest.dSYM + rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + fi +@@ -4577,10 +4329,10 @@ + + + +-{ $as_echo "$as_me:$LINENO: checking for library containing strerror" >&5 +-$as_echo_n "checking for library containing strerror... " >&6; } ++{ echo "$as_me:$LINENO: checking for library containing strerror" >&5 ++echo $ECHO_N "checking for library containing strerror... $ECHO_C" >&6; } + if test "${ac_cv_search_strerror+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + ac_func_search_save_LIBS=$LIBS + cat >conftest.$ac_ext <<_ACEOF +@@ -4618,30 +4370,26 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + ac_cv_search_strerror=$ac_res + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + + fi + +-rm -rf conftest.dSYM + rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext + if test "${ac_cv_search_strerror+set}" = set; then +@@ -4656,8 +4404,8 @@ + rm conftest.$ac_ext + LIBS=$ac_func_search_save_LIBS + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_search_strerror" >&5 +-$as_echo "$ac_cv_search_strerror" >&6; } ++{ echo "$as_me:$LINENO: result: $ac_cv_search_strerror" >&5 ++echo "${ECHO_T}$ac_cv_search_strerror" >&6; } + ac_res=$ac_cv_search_strerror + if test "$ac_res" != no; then + test "$ac_res" = "none required" || LIBS="$ac_res $LIBS" +@@ -4672,10 +4420,10 @@ + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. + set dummy ${ac_tool_prefix}gcc; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_CC+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +@@ -4688,7 +4436,7 @@ + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_CC="${ac_tool_prefix}gcc" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +@@ -4699,11 +4447,11 @@ + fi + CC=$ac_cv_prog_CC + if test -n "$CC"; then +- { $as_echo "$as_me:$LINENO: result: $CC" >&5 +-$as_echo "$CC" >&6; } ++ { echo "$as_me:$LINENO: result: $CC" >&5 ++echo "${ECHO_T}$CC" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + + +@@ -4712,10 +4460,10 @@ + ac_ct_CC=$CC + # Extract the first word of "gcc", so it can be a program name with args. + set dummy gcc; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_ac_ct_CC+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +@@ -4728,7 +4476,7 @@ + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_CC="gcc" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +@@ -4739,11 +4487,11 @@ + fi + ac_ct_CC=$ac_cv_prog_ac_ct_CC + if test -n "$ac_ct_CC"; then +- { $as_echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +-$as_echo "$ac_ct_CC" >&6; } ++ { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 ++echo "${ECHO_T}$ac_ct_CC" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + + if test "x$ac_ct_CC" = x; then +@@ -4751,10 +4499,10 @@ + else + case $cross_compiling:$ac_tool_warned in + yes:) +-{ $as_echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools + whose name does not start with the host triplet. If you think this + configuration is useful to you, please write to autoconf@gnu.org." >&5 +-$as_echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools + whose name does not start with the host triplet. If you think this + configuration is useful to you, please write to autoconf@gnu.org." >&2;} + ac_tool_warned=yes ;; +@@ -4769,10 +4517,10 @@ + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. + set dummy ${ac_tool_prefix}cc; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_CC+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +@@ -4785,7 +4533,7 @@ + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_CC="${ac_tool_prefix}cc" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +@@ -4796,11 +4544,11 @@ + fi + CC=$ac_cv_prog_CC + if test -n "$CC"; then +- { $as_echo "$as_me:$LINENO: result: $CC" >&5 +-$as_echo "$CC" >&6; } ++ { echo "$as_me:$LINENO: result: $CC" >&5 ++echo "${ECHO_T}$CC" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + + +@@ -4809,10 +4557,10 @@ + if test -z "$CC"; then + # Extract the first word of "cc", so it can be a program name with args. + set dummy cc; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_CC+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +@@ -4830,7 +4578,7 @@ + continue + fi + ac_cv_prog_CC="cc" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +@@ -4853,11 +4601,11 @@ + fi + CC=$ac_cv_prog_CC + if test -n "$CC"; then +- { $as_echo "$as_me:$LINENO: result: $CC" >&5 +-$as_echo "$CC" >&6; } ++ { echo "$as_me:$LINENO: result: $CC" >&5 ++echo "${ECHO_T}$CC" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + + +@@ -4868,10 +4616,10 @@ + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. + set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_CC+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +@@ -4884,7 +4632,7 @@ + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_CC="$ac_tool_prefix$ac_prog" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +@@ -4895,11 +4643,11 @@ + fi + CC=$ac_cv_prog_CC + if test -n "$CC"; then +- { $as_echo "$as_me:$LINENO: result: $CC" >&5 +-$as_echo "$CC" >&6; } ++ { echo "$as_me:$LINENO: result: $CC" >&5 ++echo "${ECHO_T}$CC" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + + +@@ -4912,10 +4660,10 @@ + do + # Extract the first word of "$ac_prog", so it can be a program name with args. + set dummy $ac_prog; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_ac_ct_CC+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +@@ -4928,7 +4676,7 @@ + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_CC="$ac_prog" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +@@ -4939,11 +4687,11 @@ + fi + ac_ct_CC=$ac_cv_prog_ac_ct_CC + if test -n "$ac_ct_CC"; then +- { $as_echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +-$as_echo "$ac_ct_CC" >&6; } ++ { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 ++echo "${ECHO_T}$ac_ct_CC" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + + +@@ -4955,10 +4703,10 @@ + else + case $cross_compiling:$ac_tool_warned in + yes:) +-{ $as_echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools + whose name does not start with the host triplet. If you think this + configuration is useful to you, please write to autoconf@gnu.org." >&5 +-$as_echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools + whose name does not start with the host triplet. If you think this + configuration is useful to you, please write to autoconf@gnu.org." >&2;} + ac_tool_warned=yes ;; +@@ -4970,54 +4718,50 @@ + fi + + +-test -z "$CC" && { { $as_echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH ++test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH + See \`config.log' for more details." >&5 +-$as_echo "$as_me: error: no acceptable C compiler found in \$PATH ++echo "$as_me: error: no acceptable C compiler found in \$PATH + See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } + + # Provide some information about the compiler. +-$as_echo "$as_me:$LINENO: checking for C compiler version" >&5 +-set X $ac_compile +-ac_compiler=$2 ++echo "$as_me:$LINENO: checking for C compiler version" >&5 ++ac_compiler=`set X $ac_compile; echo $2` + { (ac_try="$ac_compiler --version >&5" + case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compiler --version >&5") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } + { (ac_try="$ac_compiler -v >&5" + case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compiler -v >&5") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } + { (ac_try="$ac_compiler -V >&5" + case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compiler -V >&5") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } + +-{ $as_echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 +-$as_echo_n "checking whether we are using the GNU C compiler... " >&6; } ++{ echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 ++echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6; } + if test "${ac_cv_c_compiler_gnu+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ +@@ -5043,21 +4787,20 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_compiler_gnu=yes + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + ac_compiler_gnu=no +@@ -5067,19 +4810,15 @@ + ac_cv_c_compiler_gnu=$ac_compiler_gnu + + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 +-$as_echo "$ac_cv_c_compiler_gnu" >&6; } +-if test $ac_compiler_gnu = yes; then +- GCC=yes +-else +- GCC= +-fi ++{ echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 ++echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6; } ++GCC=`test $ac_compiler_gnu = yes && echo yes` + ac_test_CFLAGS=${CFLAGS+set} + ac_save_CFLAGS=$CFLAGS +-{ $as_echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 +-$as_echo_n "checking whether $CC accepts -g... " >&6; } ++{ echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 ++echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6; } + if test "${ac_cv_prog_cc_g+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + ac_save_c_werror_flag=$ac_c_werror_flag + ac_c_werror_flag=yes +@@ -5106,21 +4845,20 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_cv_prog_cc_g=yes + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + CFLAGS="" +@@ -5145,21 +4883,20 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + : + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + ac_c_werror_flag=$ac_save_c_werror_flag +@@ -5185,21 +4922,20 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_cv_prog_cc_g=yes + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + +@@ -5214,8 +4950,8 @@ + rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + ac_c_werror_flag=$ac_save_c_werror_flag + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 +-$as_echo "$ac_cv_prog_cc_g" >&6; } ++{ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 ++echo "${ECHO_T}$ac_cv_prog_cc_g" >&6; } + if test "$ac_test_CFLAGS" = set; then + CFLAGS=$ac_save_CFLAGS + elif test $ac_cv_prog_cc_g = yes; then +@@ -5231,10 +4967,10 @@ + CFLAGS= + fi + fi +-{ $as_echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5 +-$as_echo_n "checking for $CC option to accept ISO C89... " >&6; } ++{ echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5 ++echo $ECHO_N "checking for $CC option to accept ISO C89... $ECHO_C" >&6; } + if test "${ac_cv_prog_cc_c89+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + ac_cv_prog_cc_c89=no + ac_save_CC=$CC +@@ -5305,21 +5041,20 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_cv_prog_cc_c89=$ac_arg + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + +@@ -5335,15 +5070,15 @@ + # AC_CACHE_VAL + case "x$ac_cv_prog_cc_c89" in + x) +- { $as_echo "$as_me:$LINENO: result: none needed" >&5 +-$as_echo "none needed" >&6; } ;; ++ { echo "$as_me:$LINENO: result: none needed" >&5 ++echo "${ECHO_T}none needed" >&6; } ;; + xno) +- { $as_echo "$as_me:$LINENO: result: unsupported" >&5 +-$as_echo "unsupported" >&6; } ;; ++ { echo "$as_me:$LINENO: result: unsupported" >&5 ++echo "${ECHO_T}unsupported" >&6; } ;; + *) + CC="$CC $ac_cv_prog_cc_c89" +- { $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5 +-$as_echo "$ac_cv_prog_cc_c89" >&6; } ;; ++ { echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5 ++echo "${ECHO_T}$ac_cv_prog_cc_c89" >&6; } ;; + esac + + +@@ -5355,10 +5090,10 @@ + + depcc="$CC" am_compiler_list= + +-{ $as_echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 +-$as_echo_n "checking dependency style of $depcc... " >&6; } ++{ echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 ++echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6; } + if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then + # We make a subdir and do the tests there. Otherwise we can end up +@@ -5446,8 +5181,8 @@ + fi + + fi +-{ $as_echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 +-$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } ++{ echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 ++echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6; } + CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type + + if +@@ -5466,15 +5201,15 @@ + ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' + ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' + ac_compiler_gnu=$ac_cv_c_compiler_gnu +-{ $as_echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 +-$as_echo_n "checking how to run the C preprocessor... " >&6; } ++{ echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 ++echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6; } + # On Suns, sometimes $CPP names a directory. + if test -n "$CPP" && test -d "$CPP"; then + CPP= + fi + if test -z "$CPP"; then + if test "${ac_cv_prog_CPP+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + # Double quotes because CPP needs to be expanded + for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" +@@ -5506,21 +5241,20 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err + }; then + : + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + # Broken: fails on valid input. +@@ -5544,14 +5278,13 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err +@@ -5559,7 +5292,7 @@ + # Broken: success on invalid input. + continue + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + # Passes both tests. +@@ -5584,8 +5317,8 @@ + else + ac_cv_prog_CPP=$CPP + fi +-{ $as_echo "$as_me:$LINENO: result: $CPP" >&5 +-$as_echo "$CPP" >&6; } ++{ echo "$as_me:$LINENO: result: $CPP" >&5 ++echo "${ECHO_T}$CPP" >&6; } + ac_preproc_ok=false + for ac_c_preproc_warn_flag in '' yes + do +@@ -5613,21 +5346,20 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err + }; then + : + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + # Broken: fails on valid input. +@@ -5651,14 +5383,13 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err +@@ -5666,7 +5397,7 @@ + # Broken: success on invalid input. + continue + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + # Passes both tests. +@@ -5682,9 +5413,9 @@ + if $ac_preproc_ok; then + : + else +- { { $as_echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check ++ { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check + See \`config.log' for more details." >&5 +-$as_echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check ++echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check + See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } + fi +@@ -5696,37 +5427,42 @@ + ac_compiler_gnu=$ac_cv_c_compiler_gnu + + +-{ $as_echo "$as_me:$LINENO: checking for grep that handles long lines and -e" >&5 +-$as_echo_n "checking for grep that handles long lines and -e... " >&6; } ++{ echo "$as_me:$LINENO: checking for grep that handles long lines and -e" >&5 ++echo $ECHO_N "checking for grep that handles long lines and -e... $ECHO_C" >&6; } ++if test "${ac_cv_path_GREP+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ # Extract the first word of "grep ggrep" to use in msg output ++if test -z "$GREP"; then ++set dummy grep ggrep; ac_prog_name=$2 + if test "${ac_cv_path_GREP+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- if test -z "$GREP"; then + ac_path_GREP_found=false +- # Loop through the user's path and test for each of PROGNAME-LIST +- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++# Loop through the user's path and test for each of PROGNAME-LIST ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in grep ggrep; do +- for ac_exec_ext in '' $ac_executable_extensions; do +- ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" +- { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue +-# Check for GNU ac_path_GREP and select it if it is found. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" ++ { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue ++ # Check for GNU ac_path_GREP and select it if it is found. + # Check for GNU $ac_path_GREP + case `"$ac_path_GREP" --version 2>&1` in + *GNU*) + ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; + *) + ac_count=0 +- $as_echo_n 0123456789 >"conftest.in" ++ echo $ECHO_N "0123456789$ECHO_C" >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" +- $as_echo 'GREP' >> "conftest.nl" ++ echo 'GREP' >> "conftest.nl" + "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + ac_count=`expr $ac_count + 1` +@@ -5741,60 +5477,74 @@ + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; + esac + +- $ac_path_GREP_found && break 3 +- done ++ ++ $ac_path_GREP_found && break 3 + done + done ++ ++done + IFS=$as_save_IFS +- if test -z "$ac_cv_path_GREP"; then +- { { $as_echo "$as_me:$LINENO: error: no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 +-$as_echo "$as_me: error: no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} ++ ++ ++fi ++ ++GREP="$ac_cv_path_GREP" ++if test -z "$GREP"; then ++ { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 ++echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} + { (exit 1); exit 1; }; } +- fi ++fi ++ + else + ac_cv_path_GREP=$GREP + fi + ++ + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_path_GREP" >&5 +-$as_echo "$ac_cv_path_GREP" >&6; } ++{ echo "$as_me:$LINENO: result: $ac_cv_path_GREP" >&5 ++echo "${ECHO_T}$ac_cv_path_GREP" >&6; } + GREP="$ac_cv_path_GREP" + + +-{ $as_echo "$as_me:$LINENO: checking for egrep" >&5 +-$as_echo_n "checking for egrep... " >&6; } ++{ echo "$as_me:$LINENO: checking for egrep" >&5 ++echo $ECHO_N "checking for egrep... $ECHO_C" >&6; } + if test "${ac_cv_path_EGREP+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 + then ac_cv_path_EGREP="$GREP -E" + else +- if test -z "$EGREP"; then ++ # Extract the first word of "egrep" to use in msg output ++if test -z "$EGREP"; then ++set dummy egrep; ac_prog_name=$2 ++if test "${ac_cv_path_EGREP+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else + ac_path_EGREP_found=false +- # Loop through the user's path and test for each of PROGNAME-LIST +- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++# Loop through the user's path and test for each of PROGNAME-LIST ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in egrep; do +- for ac_exec_ext in '' $ac_executable_extensions; do +- ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" +- { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue +-# Check for GNU ac_path_EGREP and select it if it is found. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" ++ { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue ++ # Check for GNU ac_path_EGREP and select it if it is found. + # Check for GNU $ac_path_EGREP + case `"$ac_path_EGREP" --version 2>&1` in + *GNU*) + ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; + *) + ac_count=0 +- $as_echo_n 0123456789 >"conftest.in" ++ echo $ECHO_N "0123456789$ECHO_C" >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" +- $as_echo 'EGREP' >> "conftest.nl" ++ echo 'EGREP' >> "conftest.nl" + "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + ac_count=`expr $ac_count + 1` +@@ -5809,31 +5559,40 @@ + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; + esac + +- $ac_path_EGREP_found && break 3 +- done ++ ++ $ac_path_EGREP_found && break 3 + done + done ++ ++done + IFS=$as_save_IFS +- if test -z "$ac_cv_path_EGREP"; then +- { { $as_echo "$as_me:$LINENO: error: no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 +-$as_echo "$as_me: error: no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} ++ ++ ++fi ++ ++EGREP="$ac_cv_path_EGREP" ++if test -z "$EGREP"; then ++ { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 ++echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} + { (exit 1); exit 1; }; } +- fi ++fi ++ + else + ac_cv_path_EGREP=$EGREP + fi + ++ + fi + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_path_EGREP" >&5 +-$as_echo "$ac_cv_path_EGREP" >&6; } ++{ echo "$as_me:$LINENO: result: $ac_cv_path_EGREP" >&5 ++echo "${ECHO_T}$ac_cv_path_EGREP" >&6; } + EGREP="$ac_cv_path_EGREP" + + +-{ $as_echo "$as_me:$LINENO: checking for ANSI C header files" >&5 +-$as_echo_n "checking for ANSI C header files... " >&6; } ++{ echo "$as_me:$LINENO: checking for ANSI C header files" >&5 ++echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6; } + if test "${ac_cv_header_stdc+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ +@@ -5860,21 +5619,20 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_cv_header_stdc=yes + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_header_stdc=no +@@ -5966,40 +5724,37 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + : + else +- $as_echo "$as_me: program exited with status $ac_status" >&5 +-$as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: program exited with status $ac_status" >&5 ++echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + ( exit $ac_status ) + ac_cv_header_stdc=no + fi +-rm -rf conftest.dSYM + rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext + fi + + + fi + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 +-$as_echo "$ac_cv_header_stdc" >&6; } ++{ echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 ++echo "${ECHO_T}$ac_cv_header_stdc" >&6; } + if test $ac_cv_header_stdc = yes; then + + cat >>confdefs.h <<\_ACEOF +@@ -6008,108 +5763,61 @@ + + fi + +-# Check whether --enable-shared was given. +-if test "${enable_shared+set}" = set; then +- enableval=$enable_shared; p=${PACKAGE-default} +- case $enableval in +- yes) enable_shared=yes ;; +- no) enable_shared=no ;; +- *) +- enable_shared=no +- # Look at the argument we got. We use all the common list separators. +- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," +- for pkg in $enableval; do +- IFS="$lt_save_ifs" +- if test "X$pkg" = "X$p"; then +- enable_shared=yes +- fi +- done +- IFS="$lt_save_ifs" +- ;; +- esac +-else +- enable_shared=yes +-fi ++case `pwd` in ++ *\ * | *\ *) ++ { echo "$as_me:$LINENO: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5 ++echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;; ++esac ++ ++ ++ ++macro_version='2.2.4' ++macro_revision='1.2976' ++ ++ + + +-# Check whether --enable-static was given. +-if test "${enable_static+set}" = set; then +- enableval=$enable_static; p=${PACKAGE-default} +- case $enableval in +- yes) enable_static=yes ;; +- no) enable_static=no ;; +- *) +- enable_static=no +- # Look at the argument we got. We use all the common list separators. +- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," +- for pkg in $enableval; do +- IFS="$lt_save_ifs" +- if test "X$pkg" = "X$p"; then +- enable_static=yes +- fi +- done +- IFS="$lt_save_ifs" +- ;; +- esac +-else +- enable_static=yes +-fi + + +-# Check whether --enable-fast-install was given. +-if test "${enable_fast_install+set}" = set; then +- enableval=$enable_fast_install; p=${PACKAGE-default} +- case $enableval in +- yes) enable_fast_install=yes ;; +- no) enable_fast_install=no ;; +- *) +- enable_fast_install=no +- # Look at the argument we got. We use all the common list separators. +- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," +- for pkg in $enableval; do +- IFS="$lt_save_ifs" +- if test "X$pkg" = "X$p"; then +- enable_fast_install=yes +- fi +- done +- IFS="$lt_save_ifs" +- ;; +- esac +-else +- enable_fast_install=yes +-fi + + ++ ++ ++ ++ ++ ++ltmain="$ac_aux_dir/ltmain.sh" ++ + # Make sure we can run config.sub. + $SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || +- { { $as_echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5 +-$as_echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;} ++ { { echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5 ++echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;} + { (exit 1); exit 1; }; } + +-{ $as_echo "$as_me:$LINENO: checking build system type" >&5 +-$as_echo_n "checking build system type... " >&6; } ++{ echo "$as_me:$LINENO: checking build system type" >&5 ++echo $ECHO_N "checking build system type... $ECHO_C" >&6; } + if test "${ac_cv_build+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + ac_build_alias=$build_alias + test "x$ac_build_alias" = x && + ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` + test "x$ac_build_alias" = x && +- { { $as_echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5 +-$as_echo "$as_me: error: cannot guess build type; you must specify one" >&2;} ++ { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5 ++echo "$as_me: error: cannot guess build type; you must specify one" >&2;} + { (exit 1); exit 1; }; } + ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || +- { { $as_echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&5 +-$as_echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&2;} ++ { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&5 ++echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&2;} + { (exit 1); exit 1; }; } + + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_build" >&5 +-$as_echo "$ac_cv_build" >&6; } ++{ echo "$as_me:$LINENO: result: $ac_cv_build" >&5 ++echo "${ECHO_T}$ac_cv_build" >&6; } + case $ac_cv_build in + *-*-*) ;; +-*) { { $as_echo "$as_me:$LINENO: error: invalid value of canonical build" >&5 +-$as_echo "$as_me: error: invalid value of canonical build" >&2;} ++*) { { echo "$as_me:$LINENO: error: invalid value of canonical build" >&5 ++echo "$as_me: error: invalid value of canonical build" >&2;} + { (exit 1); exit 1; }; };; + esac + build=$ac_cv_build +@@ -6126,27 +5834,27 @@ + case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac + + +-{ $as_echo "$as_me:$LINENO: checking host system type" >&5 +-$as_echo_n "checking host system type... " >&6; } ++{ echo "$as_me:$LINENO: checking host system type" >&5 ++echo $ECHO_N "checking host system type... $ECHO_C" >&6; } + if test "${ac_cv_host+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + if test "x$host_alias" = x; then + ac_cv_host=$ac_cv_build + else + ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || +- { { $as_echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&5 +-$as_echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&2;} ++ { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&5 ++echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&2;} + { (exit 1); exit 1; }; } + fi + + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_host" >&5 +-$as_echo "$ac_cv_host" >&6; } ++{ echo "$as_me:$LINENO: result: $ac_cv_host" >&5 ++echo "${ECHO_T}$ac_cv_host" >&6; } + case $ac_cv_host in + *-*-*) ;; +-*) { { $as_echo "$as_me:$LINENO: error: invalid value of canonical host" >&5 +-$as_echo "$as_me: error: invalid value of canonical host" >&2;} ++*) { { echo "$as_me:$LINENO: error: invalid value of canonical host" >&5 ++echo "$as_me: error: invalid value of canonical host" >&2;} + { (exit 1); exit 1; }; };; + esac + host=$ac_cv_host +@@ -6163,64 +5871,204 @@ + case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac + + +-{ $as_echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5 +-$as_echo_n "checking for a sed that does not truncate output... " >&6; } +-if test "${lt_cv_path_SED+set}" = set; then +- $as_echo_n "(cached) " >&6 ++{ echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5 ++echo $ECHO_N "checking for a sed that does not truncate output... $ECHO_C" >&6; } ++if test "${ac_cv_path_SED+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/ ++ for ac_i in 1 2 3 4 5 6 7; do ++ ac_script="$ac_script$as_nl$ac_script" ++ done ++ echo "$ac_script" | sed 99q >conftest.sed ++ $as_unset ac_script || ac_script= ++ # Extract the first word of "sed gsed" to use in msg output ++if test -z "$SED"; then ++set dummy sed gsed; ac_prog_name=$2 ++if test "${ac_cv_path_SED+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- # Loop through the user's path and test for sed and gsed. +-# Then use that list of sed's as ones to test for truncation. ++ ac_path_SED_found=false ++# Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + for as_dir in $PATH + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- for lt_ac_prog in sed gsed; do +- for ac_exec_ext in '' $ac_executable_extensions; do +- if { test -f "$as_dir/$lt_ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$lt_ac_prog$ac_exec_ext"; }; then +- lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext" +- fi +- done ++ for ac_prog in sed gsed; do ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ ac_path_SED="$as_dir/$ac_prog$ac_exec_ext" ++ { test -f "$ac_path_SED" && $as_test_x "$ac_path_SED"; } || continue ++ # Check for GNU ac_path_SED and select it if it is found. ++ # Check for GNU $ac_path_SED ++case `"$ac_path_SED" --version 2>&1` in ++*GNU*) ++ ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;; ++*) ++ ac_count=0 ++ echo $ECHO_N "0123456789$ECHO_C" >"conftest.in" ++ while : ++ do ++ cat "conftest.in" "conftest.in" >"conftest.tmp" ++ mv "conftest.tmp" "conftest.in" ++ cp "conftest.in" "conftest.nl" ++ echo '' >> "conftest.nl" ++ "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break ++ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break ++ ac_count=`expr $ac_count + 1` ++ if test $ac_count -gt ${ac_path_SED_max-0}; then ++ # Best one so far, save it but keep looking for a better one ++ ac_cv_path_SED="$ac_path_SED" ++ ac_path_SED_max=$ac_count ++ fi ++ # 10*(2^10) chars as input seems more than enough ++ test $ac_count -gt 10 && break + done ++ rm -f conftest.in conftest.tmp conftest.nl conftest.out;; ++esac ++ ++ ++ $ac_path_SED_found && break 3 ++ done ++done ++ + done + IFS=$as_save_IFS +-lt_ac_max=0 +-lt_ac_count=0 +-# Add /usr/xpg4/bin/sed as it is typically found on Solaris +-# along with /bin/sed that truncates output. +-for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do +- test ! -f $lt_ac_sed && continue +- cat /dev/null > conftest.in +- lt_ac_count=0 +- echo $ECHO_N "0123456789$ECHO_C" >conftest.in +- # Check for GNU sed and select it if it is found. +- if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then +- lt_cv_path_SED=$lt_ac_sed +- break +- fi +- while true; do +- cat conftest.in conftest.in >conftest.tmp +- mv conftest.tmp conftest.in +- cp conftest.in conftest.nl +- echo >>conftest.nl +- $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break +- cmp -s conftest.out conftest.nl || break +- # 10000 chars as input seems more than enough +- test $lt_ac_count -gt 10 && break +- lt_ac_count=`expr $lt_ac_count + 1` +- if test $lt_ac_count -gt $lt_ac_max; then +- lt_ac_max=$lt_ac_count +- lt_cv_path_SED=$lt_ac_sed ++ ++ ++fi ++ ++SED="$ac_cv_path_SED" ++if test -z "$SED"; then ++ { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in \$PATH" >&5 ++echo "$as_me: error: no acceptable $ac_prog_name could be found in \$PATH" >&2;} ++ { (exit 1); exit 1; }; } ++fi ++ ++else ++ ac_cv_path_SED=$SED ++fi ++ ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_path_SED" >&5 ++echo "${ECHO_T}$ac_cv_path_SED" >&6; } ++ SED="$ac_cv_path_SED" ++ rm -f conftest.sed ++ ++test -z "$SED" && SED=sed ++Xsed="$SED -e 1s/^X//" ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++{ echo "$as_me:$LINENO: checking for fgrep" >&5 ++echo $ECHO_N "checking for fgrep... $ECHO_C" >&6; } ++if test "${ac_cv_path_FGREP+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1 ++ then ac_cv_path_FGREP="$GREP -F" ++ else ++ # Extract the first word of "fgrep" to use in msg output ++if test -z "$FGREP"; then ++set dummy fgrep; ac_prog_name=$2 ++if test "${ac_cv_path_FGREP+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_path_FGREP_found=false ++# Loop through the user's path and test for each of PROGNAME-LIST ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_prog in fgrep; do ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext" ++ { test -f "$ac_path_FGREP" && $as_test_x "$ac_path_FGREP"; } || continue ++ # Check for GNU ac_path_FGREP and select it if it is found. ++ # Check for GNU $ac_path_FGREP ++case `"$ac_path_FGREP" --version 2>&1` in ++*GNU*) ++ ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;; ++*) ++ ac_count=0 ++ echo $ECHO_N "0123456789$ECHO_C" >"conftest.in" ++ while : ++ do ++ cat "conftest.in" "conftest.in" >"conftest.tmp" ++ mv "conftest.tmp" "conftest.in" ++ cp "conftest.in" "conftest.nl" ++ echo 'FGREP' >> "conftest.nl" ++ "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break ++ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break ++ ac_count=`expr $ac_count + 1` ++ if test $ac_count -gt ${ac_path_FGREP_max-0}; then ++ # Best one so far, save it but keep looking for a better one ++ ac_cv_path_FGREP="$ac_path_FGREP" ++ ac_path_FGREP_max=$ac_count + fi ++ # 10*(2^10) chars as input seems more than enough ++ test $ac_count -gt 10 && break + done ++ rm -f conftest.in conftest.tmp conftest.nl conftest.out;; ++esac ++ ++ ++ $ac_path_FGREP_found && break 3 ++ done ++done ++ + done ++IFS=$as_save_IFS + ++ ++fi ++ ++FGREP="$ac_cv_path_FGREP" ++if test -z "$FGREP"; then ++ { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 ++echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} ++ { (exit 1); exit 1; }; } ++fi ++ ++else ++ ac_cv_path_FGREP=$FGREP ++fi ++ ++ ++ fi + fi ++{ echo "$as_me:$LINENO: result: $ac_cv_path_FGREP" >&5 ++echo "${ECHO_T}$ac_cv_path_FGREP" >&6; } ++ FGREP="$ac_cv_path_FGREP" ++ ++ ++test -z "$GREP" && GREP=grep ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ + +-SED=$lt_cv_path_SED + +-{ $as_echo "$as_me:$LINENO: result: $SED" >&5 +-$as_echo "$SED" >&6; } + + + # Check whether --with-gnu-ld was given. +@@ -6233,8 +6081,8 @@ + ac_prog=ld + if test "$GCC" = yes; then + # Check if gcc -print-prog-name=ld gives a path. +- { $as_echo "$as_me:$LINENO: checking for ld used by $CC" >&5 +-$as_echo_n "checking for ld used by $CC... " >&6; } ++ { echo "$as_me:$LINENO: checking for ld used by $CC" >&5 ++echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6; } + case $host in + *-*-mingw*) + # gcc leaves a trailing carriage return which upsets mingw +@@ -6247,9 +6095,9 @@ + [\\/]* | ?:[\\/]*) + re_direlt='/[^/][^/]*/\.\./' + # Canonicalize the pathname of ld +- ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'` +- while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do +- ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"` ++ ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` ++ while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do ++ ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` + done + test -z "$LD" && LD="$ac_prog" + ;; +@@ -6263,14 +6111,14 @@ + ;; + esac + elif test "$with_gnu_ld" = yes; then +- { $as_echo "$as_me:$LINENO: checking for GNU ld" >&5 +-$as_echo_n "checking for GNU ld... " >&6; } ++ { echo "$as_me:$LINENO: checking for GNU ld" >&5 ++echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6; } + else +- { $as_echo "$as_me:$LINENO: checking for non-GNU ld" >&5 +-$as_echo_n "checking for non-GNU ld... " >&6; } ++ { echo "$as_me:$LINENO: checking for non-GNU ld" >&5 ++echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6; } + fi + if test "${lt_cv_path_LD+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + if test -z "$LD"; then + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR +@@ -6300,19 +6148,19 @@ + + LD="$lt_cv_path_LD" + if test -n "$LD"; then +- { $as_echo "$as_me:$LINENO: result: $LD" >&5 +-$as_echo "$LD" >&6; } ++ { echo "$as_me:$LINENO: result: $LD" >&5 ++echo "${ECHO_T}$LD" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi +-test -z "$LD" && { { $as_echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5 +-$as_echo "$as_me: error: no acceptable ld found in \$PATH" >&2;} ++test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5 ++echo "$as_me: error: no acceptable ld found in \$PATH" >&2;} + { (exit 1); exit 1; }; } +-{ $as_echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5 +-$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; } ++{ echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5 ++echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6; } + if test "${lt_cv_prog_gnu_ld+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + # I'd rather use --version here, but apparently some GNU lds only accept -v. + case `$LD -v 2>&1 &5 +-$as_echo "$lt_cv_prog_gnu_ld" >&6; } ++{ echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5 ++echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6; } + with_gnu_ld=$lt_cv_prog_gnu_ld + + +-{ $as_echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5 +-$as_echo_n "checking for $LD option to reload object files... " >&6; } +-if test "${lt_cv_ld_reload_flag+set}" = set; then +- $as_echo_n "(cached) " >&6 +-else +- lt_cv_ld_reload_flag='-r' +-fi +-{ $as_echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5 +-$as_echo "$lt_cv_ld_reload_flag" >&6; } +-reload_flag=$lt_cv_ld_reload_flag +-case $reload_flag in +-"" | " "*) ;; +-*) reload_flag=" $reload_flag" ;; +-esac +-reload_cmds='$LD$reload_flag -o $output$reload_objs' +-case $host_os in +- darwin*) +- if test "$GCC" = yes; then +- reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs' +- else +- reload_cmds='$LD$reload_flag -o $output$reload_objs' +- fi +- ;; +-esac + +-{ $as_echo "$as_me:$LINENO: checking for BSD-compatible nm" >&5 +-$as_echo_n "checking for BSD-compatible nm... " >&6; } ++ ++ ++ ++ ++ ++ ++{ echo "$as_me:$LINENO: checking for BSD- or MS-compatible name lister (nm)" >&5 ++echo $ECHO_N "checking for BSD- or MS-compatible name lister (nm)... $ECHO_C" >&6; } + if test "${lt_cv_path_NM+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + if test -n "$NM"; then + # Let the user override the test. +@@ -6400,83 +6230,451 @@ + done + IFS="$lt_save_ifs" + done +- test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm ++ : ${lt_cv_path_NM=no} + fi + fi +-{ $as_echo "$as_me:$LINENO: result: $lt_cv_path_NM" >&5 +-$as_echo "$lt_cv_path_NM" >&6; } +-NM="$lt_cv_path_NM" ++{ echo "$as_me:$LINENO: result: $lt_cv_path_NM" >&5 ++echo "${ECHO_T}$lt_cv_path_NM" >&6; } ++if test "$lt_cv_path_NM" != "no"; then ++ NM="$lt_cv_path_NM" ++else ++ # Didn't find any BSD compatible name lister, look for dumpbin. ++ if test -n "$ac_tool_prefix"; then ++ for ac_prog in "dumpbin -symbols" "link -dump -symbols" ++ do ++ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. ++set dummy $ac_tool_prefix$ac_prog; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_DUMPBIN+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$DUMPBIN"; then ++ ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS + +-{ $as_echo "$as_me:$LINENO: checking whether ln -s works" >&5 +-$as_echo_n "checking whether ln -s works... " >&6; } +-LN_S=$as_ln_s +-if test "$LN_S" = "ln -s"; then +- { $as_echo "$as_me:$LINENO: result: yes" >&5 +-$as_echo "yes" >&6; } ++fi ++fi ++DUMPBIN=$ac_cv_prog_DUMPBIN ++if test -n "$DUMPBIN"; then ++ { echo "$as_me:$LINENO: result: $DUMPBIN" >&5 ++echo "${ECHO_T}$DUMPBIN" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no, using $LN_S" >&5 +-$as_echo "no, using $LN_S" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + +-{ $as_echo "$as_me:$LINENO: checking how to recognize dependent libraries" >&5 +-$as_echo_n "checking how to recognize dependent libraries... " >&6; } +-if test "${lt_cv_deplibs_check_method+set}" = set; then +- $as_echo_n "(cached) " >&6 +-else +- lt_cv_file_magic_cmd='$MAGIC_CMD' +-lt_cv_file_magic_test_file= +-lt_cv_deplibs_check_method='unknown' +-# Need to set the preceding variable on all platforms that support +-# interlibrary dependencies. +-# 'none' -- dependencies not supported. +-# `unknown' -- same as none, but documents that we really don't know. +-# 'pass_all' -- all dependencies passed with no checks. +-# 'test_compile' -- check by making test program. +-# 'file_magic [[regex]]' -- check by looking for files in library path +-# which responds to the $file_magic_cmd with a given extended regex. +-# If you have `file' or equivalent on your system and you're not sure +-# whether `pass_all' will *always* work, you probably want this one. + +-case $host_os in +-aix[4-9]*) +- lt_cv_deplibs_check_method=pass_all +- ;; ++ test -n "$DUMPBIN" && break ++ done ++fi ++if test -z "$DUMPBIN"; then ++ ac_ct_DUMPBIN=$DUMPBIN ++ for ac_prog in "dumpbin -symbols" "link -dump -symbols" ++do ++ # Extract the first word of "$ac_prog", so it can be a program name with args. ++set dummy $ac_prog; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_ac_ct_DUMPBIN+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$ac_ct_DUMPBIN"; then ++ ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_ac_ct_DUMPBIN="$ac_prog" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS + +-beos*) +- lt_cv_deplibs_check_method=pass_all +- ;; ++fi ++fi ++ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN ++if test -n "$ac_ct_DUMPBIN"; then ++ { echo "$as_me:$LINENO: result: $ac_ct_DUMPBIN" >&5 ++echo "${ECHO_T}$ac_ct_DUMPBIN" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi + +-bsdi[45]*) +- lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)' +- lt_cv_file_magic_cmd='/usr/bin/file -L' +- lt_cv_file_magic_test_file=/shlib/libc.so +- ;; + +-cygwin*) +- # func_win32_libid is a shell function defined in ltmain.sh +- lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' +- lt_cv_file_magic_cmd='func_win32_libid' +- ;; ++ test -n "$ac_ct_DUMPBIN" && break ++done + +-mingw* | pw32*) +- # Base MSYS/MinGW do not provide the 'file' command needed by +- # func_win32_libid shell function, so use a weaker test based on 'objdump', +- # unless we find 'file', for example because we are cross-compiling. +- if ( file / ) >/dev/null 2>&1; then +- lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' +- lt_cv_file_magic_cmd='func_win32_libid' ++ if test "x$ac_ct_DUMPBIN" = x; then ++ DUMPBIN=":" + else +- lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' +- lt_cv_file_magic_cmd='$OBJDUMP -f' +- fi +- ;; +- ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&5 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&2;} ++ac_tool_warned=yes ;; ++esac ++ DUMPBIN=$ac_ct_DUMPBIN ++ fi ++fi ++ ++ ++ if test "$DUMPBIN" != ":"; then ++ NM="$DUMPBIN" ++ fi ++fi ++test -z "$NM" && NM=nm ++ ++ ++ ++ ++ ++ ++{ echo "$as_me:$LINENO: checking the name lister ($NM) interface" >&5 ++echo $ECHO_N "checking the name lister ($NM) interface... $ECHO_C" >&6; } ++if test "${lt_cv_nm_interface+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ lt_cv_nm_interface="BSD nm" ++ echo "int some_variable = 0;" > conftest.$ac_ext ++ (eval echo "\"\$as_me:6365: $ac_compile\"" >&5) ++ (eval "$ac_compile" 2>conftest.err) ++ cat conftest.err >&5 ++ (eval echo "\"\$as_me:6368: $NM \\\"conftest.$ac_objext\\\"\"" >&5) ++ (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) ++ cat conftest.err >&5 ++ (eval echo "\"\$as_me:6371: output\"" >&5) ++ cat conftest.out >&5 ++ if $GREP 'External.*some_variable' conftest.out > /dev/null; then ++ lt_cv_nm_interface="MS dumpbin" ++ fi ++ rm -f conftest* ++fi ++{ echo "$as_me:$LINENO: result: $lt_cv_nm_interface" >&5 ++echo "${ECHO_T}$lt_cv_nm_interface" >&6; } ++ ++{ echo "$as_me:$LINENO: checking whether ln -s works" >&5 ++echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6; } ++LN_S=$as_ln_s ++if test "$LN_S" = "ln -s"; then ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no, using $LN_S" >&5 ++echo "${ECHO_T}no, using $LN_S" >&6; } ++fi ++ ++# find the maximum length of command line arguments ++{ echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5 ++echo $ECHO_N "checking the maximum length of command line arguments... $ECHO_C" >&6; } ++if test "${lt_cv_sys_max_cmd_len+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ i=0 ++ teststring="ABCD" ++ ++ case $build_os in ++ msdosdjgpp*) ++ # On DJGPP, this test can blow up pretty badly due to problems in libc ++ # (any single argument exceeding 2000 bytes causes a buffer overrun ++ # during glob expansion). Even if it were fixed, the result of this ++ # check would be larger than it should be. ++ lt_cv_sys_max_cmd_len=12288; # 12K is about right ++ ;; ++ ++ gnu*) ++ # Under GNU Hurd, this test is not required because there is ++ # no limit to the length of command line arguments. ++ # Libtool will interpret -1 as no limit whatsoever ++ lt_cv_sys_max_cmd_len=-1; ++ ;; ++ ++ cygwin* | mingw*) ++ # On Win9x/ME, this test blows up -- it succeeds, but takes ++ # about 5 minutes as the teststring grows exponentially. ++ # Worse, since 9x/ME are not pre-emptively multitasking, ++ # you end up with a "frozen" computer, even though with patience ++ # the test eventually succeeds (with a max line length of 256k). ++ # Instead, let's just punt: use the minimum linelength reported by ++ # all of the supported platforms: 8192 (on NT/2K/XP). ++ lt_cv_sys_max_cmd_len=8192; ++ ;; ++ ++ amigaos*) ++ # On AmigaOS with pdksh, this test takes hours, literally. ++ # So we just punt and use a minimum line length of 8192. ++ lt_cv_sys_max_cmd_len=8192; ++ ;; ++ ++ netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) ++ # This has been around since 386BSD, at least. Likely further. ++ if test -x /sbin/sysctl; then ++ lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` ++ elif test -x /usr/sbin/sysctl; then ++ lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` ++ else ++ lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs ++ fi ++ # And add a safety zone ++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` ++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` ++ ;; ++ ++ interix*) ++ # We know the value 262144 and hardcode it with a safety zone (like BSD) ++ lt_cv_sys_max_cmd_len=196608 ++ ;; ++ ++ osf*) ++ # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure ++ # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not ++ # nice to cause kernel panics so lets avoid the loop below. ++ # First set a reasonable default. ++ lt_cv_sys_max_cmd_len=16384 ++ # ++ if test -x /sbin/sysconfig; then ++ case `/sbin/sysconfig -q proc exec_disable_arg_limit` in ++ *1*) lt_cv_sys_max_cmd_len=-1 ;; ++ esac ++ fi ++ ;; ++ sco3.2v5*) ++ lt_cv_sys_max_cmd_len=102400 ++ ;; ++ sysv5* | sco5v6* | sysv4.2uw2*) ++ kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` ++ if test -n "$kargmax"; then ++ lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ ]//'` ++ else ++ lt_cv_sys_max_cmd_len=32768 ++ fi ++ ;; ++ *) ++ lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` ++ if test -n "$lt_cv_sys_max_cmd_len"; then ++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` ++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` ++ else ++ # Make teststring a little bigger before we do anything with it. ++ # a 1K string should be a reasonable start. ++ for i in 1 2 3 4 5 6 7 8 ; do ++ teststring=$teststring$teststring ++ done ++ SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} ++ # If test is not a shell built-in, we'll probably end up computing a ++ # maximum length that is only half of the actual maximum length, but ++ # we can't tell. ++ while { test "X"`$SHELL $0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \ ++ = "XX$teststring$teststring"; } >/dev/null 2>&1 && ++ test $i != 17 # 1/2 MB should be enough ++ do ++ i=`expr $i + 1` ++ teststring=$teststring$teststring ++ done ++ # Only check the string length outside the loop. ++ lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1` ++ teststring= ++ # Add a significant safety factor because C++ compilers can tack on ++ # massive amounts of additional arguments before passing them to the ++ # linker. It appears as though 1/2 is a usable value. ++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` ++ fi ++ ;; ++ esac ++ ++fi ++ ++if test -n $lt_cv_sys_max_cmd_len ; then ++ { echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5 ++echo "${ECHO_T}$lt_cv_sys_max_cmd_len" >&6; } ++else ++ { echo "$as_me:$LINENO: result: none" >&5 ++echo "${ECHO_T}none" >&6; } ++fi ++max_cmd_len=$lt_cv_sys_max_cmd_len ++ ++ ++ ++ ++ ++ ++: ${CP="cp -f"} ++: ${MV="mv -f"} ++: ${RM="rm -f"} ++ ++{ echo "$as_me:$LINENO: checking whether the shell understands some XSI constructs" >&5 ++echo $ECHO_N "checking whether the shell understands some XSI constructs... $ECHO_C" >&6; } ++# Try some XSI features ++xsi_shell=no ++( _lt_dummy="a/b/c" ++ test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \ ++ = c,a/b,, \ ++ && eval 'test $(( 1 + 1 )) -eq 2 \ ++ && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ ++ && xsi_shell=yes ++{ echo "$as_me:$LINENO: result: $xsi_shell" >&5 ++echo "${ECHO_T}$xsi_shell" >&6; } ++ ++ ++{ echo "$as_me:$LINENO: checking whether the shell understands \"+=\"" >&5 ++echo $ECHO_N "checking whether the shell understands \"+=\"... $ECHO_C" >&6; } ++lt_shell_append=no ++( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \ ++ >/dev/null 2>&1 \ ++ && lt_shell_append=yes ++{ echo "$as_me:$LINENO: result: $lt_shell_append" >&5 ++echo "${ECHO_T}$lt_shell_append" >&6; } ++ ++ ++if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then ++ lt_unset=unset ++else ++ lt_unset=false ++fi ++ ++ ++ ++ ++ ++# test EBCDIC or ASCII ++case `echo X|tr X '\101'` in ++ A) # ASCII based system ++ # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr ++ lt_SP2NL='tr \040 \012' ++ lt_NL2SP='tr \015\012 \040\040' ++ ;; ++ *) # EBCDIC based system ++ lt_SP2NL='tr \100 \n' ++ lt_NL2SP='tr \r\n \100\100' ++ ;; ++esac ++ ++ ++ ++ ++ ++ ++ ++ ++ ++{ echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5 ++echo $ECHO_N "checking for $LD option to reload object files... $ECHO_C" >&6; } ++if test "${lt_cv_ld_reload_flag+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ lt_cv_ld_reload_flag='-r' ++fi ++{ echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5 ++echo "${ECHO_T}$lt_cv_ld_reload_flag" >&6; } ++reload_flag=$lt_cv_ld_reload_flag ++case $reload_flag in ++"" | " "*) ;; ++*) reload_flag=" $reload_flag" ;; ++esac ++reload_cmds='$LD$reload_flag -o $output$reload_objs' ++case $host_os in ++ darwin*) ++ if test "$GCC" = yes; then ++ reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs' ++ else ++ reload_cmds='$LD$reload_flag -o $output$reload_objs' ++ fi ++ ;; ++esac ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++{ echo "$as_me:$LINENO: checking how to recognize dependent libraries" >&5 ++echo $ECHO_N "checking how to recognize dependent libraries... $ECHO_C" >&6; } ++if test "${lt_cv_deplibs_check_method+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ lt_cv_file_magic_cmd='$MAGIC_CMD' ++lt_cv_file_magic_test_file= ++lt_cv_deplibs_check_method='unknown' ++# Need to set the preceding variable on all platforms that support ++# interlibrary dependencies. ++# 'none' -- dependencies not supported. ++# `unknown' -- same as none, but documents that we really don't know. ++# 'pass_all' -- all dependencies passed with no checks. ++# 'test_compile' -- check by making test program. ++# 'file_magic [[regex]]' -- check by looking for files in library path ++# which responds to the $file_magic_cmd with a given extended regex. ++# If you have `file' or equivalent on your system and you're not sure ++# whether `pass_all' will *always* work, you probably want this one. ++ ++case $host_os in ++aix[4-9]*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ ++beos*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ ++bsdi[45]*) ++ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)' ++ lt_cv_file_magic_cmd='/usr/bin/file -L' ++ lt_cv_file_magic_test_file=/shlib/libc.so ++ ;; ++ ++cygwin*) ++ # func_win32_libid is a shell function defined in ltmain.sh ++ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' ++ lt_cv_file_magic_cmd='func_win32_libid' ++ ;; ++ ++mingw* | pw32*) ++ # Base MSYS/MinGW do not provide the 'file' command needed by ++ # func_win32_libid shell function, so use a weaker test based on 'objdump', ++ # unless we find 'file', for example because we are cross-compiling. ++ if ( file / ) >/dev/null 2>&1; then ++ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' ++ lt_cv_file_magic_cmd='func_win32_libid' ++ else ++ lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' ++ lt_cv_file_magic_cmd='$OBJDUMP -f' ++ fi ++ ;; ++ + darwin* | rhapsody*) + lt_cv_deplibs_check_method=pass_all + ;; + + freebsd* | dragonfly*) +- if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then ++ if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then + case $host_cpu in + i*86 ) + # Not sure whether the presence of OpenBSD here was a mistake. +@@ -6533,8 +6731,8 @@ + lt_cv_deplibs_check_method=pass_all + ;; + +-netbsd*) +- if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then ++netbsd* | netbsdelf*-gnu) ++ if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' + else + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$' +@@ -6547,12 +6745,12 @@ + lt_cv_file_magic_test_file=/usr/lib/libnls.so + ;; + +-nto-qnx*) +- lt_cv_deplibs_check_method=unknown ++*nto* | *qnx*) ++ lt_cv_deplibs_check_method=pass_all + ;; + + openbsd*) +- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then ++ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$' + else + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' +@@ -6571,6 +6769,10 @@ + lt_cv_deplibs_check_method=pass_all + ;; + ++sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; ++ + sysv4 | sysv4.3*) + case $host_vendor in + motorola) +@@ -6598,14 +6800,14 @@ + esac + ;; + +-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) ++tpf*) + lt_cv_deplibs_check_method=pass_all + ;; + esac + + fi +-{ $as_echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5 +-$as_echo "$lt_cv_deplibs_check_method" >&6; } ++{ echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5 ++echo "${ECHO_T}$lt_cv_deplibs_check_method" >&6; } + file_magic_cmd=$lt_cv_file_magic_cmd + deplibs_check_method=$lt_cv_deplibs_check_method + test -z "$deplibs_check_method" && deplibs_check_method=unknown +@@ -6613,242 +6815,114 @@ + + + +-# If no C compiler was specified, use CC. +-LTCC=${LTCC-"$CC"} + +-# If no C compiler flags were specified, use CFLAGS. +-LTCFLAGS=${LTCFLAGS-"$CFLAGS"} + +-# Allow CC to be a program name with arguments. +-compiler=$CC +- +-# Check whether --enable-libtool-lock was given. +-if test "${enable_libtool_lock+set}" = set; then +- enableval=$enable_libtool_lock; +-fi +- +-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes + +-# Some flags need to be propagated to the compiler or linker for good +-# libtool support. +-case $host in +-ia64-*-hpux*) +- # Find out which ABI we are using. +- echo 'int i;' > conftest.$ac_ext +- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>&5 +- ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then +- case `/usr/bin/file conftest.$ac_objext` in +- *ELF-32*) +- HPUX_IA64_MODE="32" +- ;; +- *ELF-64*) +- HPUX_IA64_MODE="64" +- ;; +- esac +- fi +- rm -rf conftest* +- ;; +-*-*-irix6*) +- # Find out which ABI we are using. +- echo '#line 6656 "configure"' > conftest.$ac_ext +- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>&5 +- ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then +- if test "$lt_cv_prog_gnu_ld" = yes; then +- case `/usr/bin/file conftest.$ac_objext` in +- *32-bit*) +- LD="${LD-ld} -melf32bsmip" +- ;; +- *N32*) +- LD="${LD-ld} -melf32bmipn32" +- ;; +- *64-bit*) +- LD="${LD-ld} -melf64bmip" +- ;; +- esac +- else +- case `/usr/bin/file conftest.$ac_objext` in +- *32-bit*) +- LD="${LD-ld} -32" +- ;; +- *N32*) +- LD="${LD-ld} -n32" +- ;; +- *64-bit*) +- LD="${LD-ld} -64" +- ;; +- esac +- fi +- fi +- rm -rf conftest* +- ;; + +-x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \ +-s390*-*linux*|sparc*-*linux*) +- # Find out which ABI we are using. +- echo 'int i;' > conftest.$ac_ext +- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>&5 +- ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then +- case `/usr/bin/file conftest.o` in +- *32-bit*) +- case $host in +- x86_64-*kfreebsd*-gnu) +- LD="${LD-ld} -m elf_i386_fbsd" +- ;; +- x86_64-*linux*) +- LD="${LD-ld} -m elf_i386" +- ;; +- ppc64-*linux*|powerpc64-*linux*) +- LD="${LD-ld} -m elf32ppclinux" +- ;; +- s390x-*linux*) +- LD="${LD-ld} -m elf_s390" +- ;; +- sparc64-*linux*) +- LD="${LD-ld} -m elf32_sparc" +- ;; +- esac +- ;; +- *64-bit*) +- libsuff=64 +- case $host in +- x86_64-*kfreebsd*-gnu) +- LD="${LD-ld} -m elf_x86_64_fbsd" +- ;; +- x86_64-*linux*) +- LD="${LD-ld} -m elf_x86_64" +- ;; +- ppc*-*linux*|powerpc*-*linux*) +- LD="${LD-ld} -m elf64ppc" +- ;; +- s390*-*linux*) +- LD="${LD-ld} -m elf64_s390" +- ;; +- sparc*-*linux*) +- LD="${LD-ld} -m elf64_sparc" +- ;; +- esac +- ;; +- esac +- fi +- rm -rf conftest* +- ;; + +-*-*-sco3.2v5*) +- # On SCO OpenServer 5, we need -belf to get full-featured binaries. +- SAVE_CFLAGS="$CFLAGS" +- CFLAGS="$CFLAGS -belf" +- { $as_echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5 +-$as_echo_n "checking whether the C compiler needs -belf... " >&6; } +-if test "${lt_cv_cc_needs_belf+set}" = set; then +- $as_echo_n "(cached) " >&6 +-else +- ac_ext=c +-ac_cpp='$CPP $CPPFLAGS' +-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +-ac_compiler_gnu=$ac_cv_c_compiler_gnu + +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ + +-int +-main () +-{ + +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then +- lt_cv_cc_needs_belf=yes ++if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args. ++set dummy ${ac_tool_prefix}ar; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_AR+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++ if test -n "$AR"; then ++ ac_cv_prog_AR="$AR" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_AR="${ac_tool_prefix}ar" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS + +- lt_cv_cc_needs_belf=no ++fi ++fi ++AR=$ac_cv_prog_AR ++if test -n "$AR"; then ++ { echo "$as_me:$LINENO: result: $AR" >&5 ++echo "${ECHO_T}$AR" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + +-rm -rf conftest.dSYM +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext +- ac_ext=c +-ac_cpp='$CPP $CPPFLAGS' +-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +-ac_compiler_gnu=$ac_cv_c_compiler_gnu + + fi +-{ $as_echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5 +-$as_echo "$lt_cv_cc_needs_belf" >&6; } +- if test x"$lt_cv_cc_needs_belf" != x"yes"; then +- # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf +- CFLAGS="$SAVE_CFLAGS" +- fi +- ;; +-sparc*-*solaris*) +- # Find out which ABI we are using. +- echo 'int i;' > conftest.$ac_ext +- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>&5 +- ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then +- case `/usr/bin/file conftest.o` in +- *64-bit*) +- case $lt_cv_prog_gnu_ld in +- yes*) LD="${LD-ld} -m elf64_sparc" ;; +- *) +- if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then +- LD="${LD-ld} -64" +- fi +- ;; +- esac +- ;; +- esac ++if test -z "$ac_cv_prog_AR"; then ++ ac_ct_AR=$AR ++ # Extract the first word of "ar", so it can be a program name with args. ++set dummy ar; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_ac_ct_AR+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$ac_ct_AR"; then ++ ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_ac_ct_AR="ar" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 + fi +- rm -rf conftest* +- ;; ++done ++done ++IFS=$as_save_IFS + ++fi ++fi ++ac_ct_AR=$ac_cv_prog_ac_ct_AR ++if test -n "$ac_ct_AR"; then ++ { echo "$as_me:$LINENO: result: $ac_ct_AR" >&5 ++echo "${ECHO_T}$ac_ct_AR" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi + ++ if test "x$ac_ct_AR" = x; then ++ AR="false" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&5 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&2;} ++ac_tool_warned=yes ;; + esac ++ AR=$ac_ct_AR ++ fi ++else ++ AR="$ac_cv_prog_AR" ++fi + +-need_locks="$enable_libtool_lock" ++test -z "$AR" && AR=ar ++test -z "$AR_FLAGS" && AR_FLAGS=cru + + +-# On IRIX 5.3, sys/types and inttypes.h are conflicting. + + + +@@ -6858,239 +6932,119 @@ + + + +-for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ +- inttypes.h stdint.h unistd.h ++if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. ++set dummy ${ac_tool_prefix}strip; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_STRIP+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$STRIP"; then ++ ac_cv_prog_STRIP="$STRIP" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH + do +-as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` +-{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 +-$as_echo_n "checking for $ac_header... " >&6; } +-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then +- $as_echo_n "(cached) " >&6 ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_STRIP="${ac_tool_prefix}strip" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++fi ++fi ++STRIP=$ac_cv_prog_STRIP ++if test -n "$STRIP"; then ++ { echo "$as_me:$LINENO: result: $STRIP" >&5 ++echo "${ECHO_T}$STRIP" >&6; } + else +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-$ac_includes_default ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi + +-#include <$ac_header> +-_ACEOF +-rm -f conftest.$ac_objext +-if { (ac_try="$ac_compile" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_compile") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest.$ac_objext; then +- eval "$as_ac_Header=yes" +-else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- eval "$as_ac_Header=no" +-fi +- +-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +-fi +-ac_res=`eval 'as_val=${'$as_ac_Header'} +- $as_echo "$as_val"'` +- { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 +-$as_echo "$ac_res" >&6; } +-if test `eval 'as_val=${'$as_ac_Header'} +- $as_echo "$as_val"'` = yes; then +- cat >>confdefs.h <<_ACEOF +-#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 +-_ACEOF + + fi +- ++if test -z "$ac_cv_prog_STRIP"; then ++ ac_ct_STRIP=$STRIP ++ # Extract the first word of "strip", so it can be a program name with args. ++set dummy strip; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$ac_ct_STRIP"; then ++ ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_ac_ct_STRIP="strip" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi + done ++done ++IFS=$as_save_IFS + +- +- +-for ac_header in dlfcn.h +-do +-as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` +-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then +- { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 +-$as_echo_n "checking for $ac_header... " >&6; } +-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then +- $as_echo_n "(cached) " >&6 + fi +-ac_res=`eval 'as_val=${'$as_ac_Header'} +- $as_echo "$as_val"'` +- { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 +-$as_echo "$ac_res" >&6; } +-else +- # Is the header compilable? +-{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5 +-$as_echo_n "checking $ac_header usability... " >&6; } +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-$ac_includes_default +-#include <$ac_header> +-_ACEOF +-rm -f conftest.$ac_objext +-if { (ac_try="$ac_compile" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_compile") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest.$ac_objext; then +- ac_header_compiler=yes ++fi ++ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP ++if test -n "$ac_ct_STRIP"; then ++ { echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 ++echo "${ECHO_T}$ac_ct_STRIP" >&6; } + else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- ac_header_compiler=no ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + +-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +-{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +-$as_echo "$ac_header_compiler" >&6; } +- +-# Is the header present? +-{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5 +-$as_echo_n "checking $ac_header presence... " >&6; } +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-#include <$ac_header> +-_ACEOF +-if { (ac_try="$ac_cpp conftest.$ac_ext" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; ++ if test "x$ac_ct_STRIP" = x; then ++ STRIP=":" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&5 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&2;} ++ac_tool_warned=yes ;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } >/dev/null && { +- test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || +- test ! -s conftest.err +- }; then +- ac_header_preproc=yes ++ STRIP=$ac_ct_STRIP ++ fi + else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- ac_header_preproc=no ++ STRIP="$ac_cv_prog_STRIP" + fi + +-rm -f conftest.err conftest.$ac_ext +-{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +-$as_echo "$ac_header_preproc" >&6; } ++test -z "$STRIP" && STRIP=: + +-# So? What about this header? +-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in +- yes:no: ) +- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 +-$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 +-$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} +- ac_header_preproc=yes +- ;; +- no:yes:* ) +- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 +-$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 +-$as_echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 +-$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 +-$as_echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 +-$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 +-$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} +- ( cat <<\_ASBOX +-## ---------------------------------------------------------------------------- ## +-## Report this to http://bugzilla.gnome.org/enter_bug.cgi?product=gnome-session ## +-## ---------------------------------------------------------------------------- ## +-_ASBOX +- ) | sed "s/^/$as_me: WARNING: /" >&2 +- ;; +-esac +-{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 +-$as_echo_n "checking for $ac_header... " >&6; } +-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then +- $as_echo_n "(cached) " >&6 +-else +- eval "$as_ac_Header=\$ac_header_preproc" +-fi +-ac_res=`eval 'as_val=${'$as_ac_Header'} +- $as_echo "$as_val"'` +- { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 +-$as_echo "$ac_res" >&6; } + +-fi +-if test `eval 'as_val=${'$as_ac_Header'} +- $as_echo "$as_val"'` = yes; then +- cat >>confdefs.h <<_ACEOF +-#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 +-_ACEOF + +-fi + +-done + +-ac_ext=cpp +-ac_cpp='$CXXCPP $CPPFLAGS' +-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' +-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu +-if test -z "$CXX"; then +- if test -n "$CCC"; then +- CXX=$CCC +- else +- if test -n "$ac_tool_prefix"; then +- for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC +- do +- # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +-set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } +-if test "${ac_cv_prog_CXX+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ ++if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. ++set dummy ${ac_tool_prefix}ranlib; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_RANLIB+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- if test -n "$CXX"; then +- ac_cv_prog_CXX="$CXX" # Let the user override the test. ++ if test -n "$RANLIB"; then ++ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. + else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + for as_dir in $PATH +@@ -7099,8 +7053,8 @@ + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then +- ac_cv_prog_CXX="$ac_tool_prefix$ac_prog" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +@@ -7109,32 +7063,28 @@ + + fi + fi +-CXX=$ac_cv_prog_CXX +-if test -n "$CXX"; then +- { $as_echo "$as_me:$LINENO: result: $CXX" >&5 +-$as_echo "$CXX" >&6; } ++RANLIB=$ac_cv_prog_RANLIB ++if test -n "$RANLIB"; then ++ { echo "$as_me:$LINENO: result: $RANLIB" >&5 ++echo "${ECHO_T}$RANLIB" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + + +- test -n "$CXX" && break +- done + fi +-if test -z "$CXX"; then +- ac_ct_CXX=$CXX +- for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC +-do +- # Extract the first word of "$ac_prog", so it can be a program name with args. +-set dummy $ac_prog; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } +-if test "${ac_cv_prog_ac_ct_CXX+set}" = set; then +- $as_echo_n "(cached) " >&6 ++if test -z "$ac_cv_prog_RANLIB"; then ++ ac_ct_RANLIB=$RANLIB ++ # Extract the first word of "ranlib", so it can be a program name with args. ++set dummy ranlib; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- if test -n "$ac_ct_CXX"; then +- ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test. ++ if test -n "$ac_ct_RANLIB"; then ++ ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. + else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + for as_dir in $PATH +@@ -7143,8 +7093,8 @@ + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then +- ac_cv_prog_ac_ct_CXX="$ac_prog" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ ac_cv_prog_ac_ct_RANLIB="ranlib" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +@@ -7153,1329 +7103,581 @@ + + fi + fi +-ac_ct_CXX=$ac_cv_prog_ac_ct_CXX +-if test -n "$ac_ct_CXX"; then +- { $as_echo "$as_me:$LINENO: result: $ac_ct_CXX" >&5 +-$as_echo "$ac_ct_CXX" >&6; } ++ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB ++if test -n "$ac_ct_RANLIB"; then ++ { echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 ++echo "${ECHO_T}$ac_ct_RANLIB" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + +- +- test -n "$ac_ct_CXX" && break +-done +- +- if test "x$ac_ct_CXX" = x; then +- CXX="g++" ++ if test "x$ac_ct_RANLIB" = x; then ++ RANLIB=":" + else + case $cross_compiling:$ac_tool_warned in + yes:) +-{ $as_echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools + whose name does not start with the host triplet. If you think this + configuration is useful to you, please write to autoconf@gnu.org." >&5 +-$as_echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools + whose name does not start with the host triplet. If you think this + configuration is useful to you, please write to autoconf@gnu.org." >&2;} + ac_tool_warned=yes ;; + esac +- CXX=$ac_ct_CXX ++ RANLIB=$ac_ct_RANLIB + fi ++else ++ RANLIB="$ac_cv_prog_RANLIB" + fi + +- fi +-fi +-# Provide some information about the compiler. +-$as_echo "$as_me:$LINENO: checking for C++ compiler version" >&5 +-set X $ac_compile +-ac_compiler=$2 +-{ (ac_try="$ac_compiler --version >&5" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_compiler --version >&5") 2>&5 +- ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } +-{ (ac_try="$ac_compiler -v >&5" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_compiler -v >&5") 2>&5 +- ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } +-{ (ac_try="$ac_compiler -V >&5" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_compiler -V >&5") 2>&5 +- ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } ++test -z "$RANLIB" && RANLIB=: + +-{ $as_echo "$as_me:$LINENO: checking whether we are using the GNU C++ compiler" >&5 +-$as_echo_n "checking whether we are using the GNU C++ compiler... " >&6; } +-if test "${ac_cv_cxx_compiler_gnu+set}" = set; then +- $as_echo_n "(cached) " >&6 +-else +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ + +-int +-main () +-{ +-#ifndef __GNUC__ +- choke me +-#endif + +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext +-if { (ac_try="$ac_compile" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_compile") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_cxx_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest.$ac_objext; then +- ac_compiler_gnu=yes +-else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 + +- ac_compiler_gnu=no +-fi + +-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +-ac_cv_cxx_compiler_gnu=$ac_compiler_gnu + +-fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_cxx_compiler_gnu" >&5 +-$as_echo "$ac_cv_cxx_compiler_gnu" >&6; } +-if test $ac_compiler_gnu = yes; then +- GXX=yes +-else +- GXX= +-fi +-ac_test_CXXFLAGS=${CXXFLAGS+set} +-ac_save_CXXFLAGS=$CXXFLAGS +-{ $as_echo "$as_me:$LINENO: checking whether $CXX accepts -g" >&5 +-$as_echo_n "checking whether $CXX accepts -g... " >&6; } +-if test "${ac_cv_prog_cxx_g+set}" = set; then +- $as_echo_n "(cached) " >&6 +-else +- ac_save_cxx_werror_flag=$ac_cxx_werror_flag +- ac_cxx_werror_flag=yes +- ac_cv_prog_cxx_g=no +- CXXFLAGS="-g" +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ ++# Determine commands to create old-style static archives. ++old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' ++old_postinstall_cmds='chmod 644 $oldlib' ++old_postuninstall_cmds= + +-int +-main () +-{ ++if test -n "$RANLIB"; then ++ case $host_os in ++ openbsd*) ++ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib" ++ ;; ++ *) ++ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib" ++ ;; ++ esac ++ old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" ++fi + +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext +-if { (ac_try="$ac_compile" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_compile") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_cxx_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest.$ac_objext; then +- ac_cv_prog_cxx_g=yes +-else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 + +- CXXFLAGS="" +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ + +-int +-main () +-{ + +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext +-if { (ac_try="$ac_compile" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_compile") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_cxx_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest.$ac_objext; then +- : +-else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 + +- ac_cxx_werror_flag=$ac_save_cxx_werror_flag +- CXXFLAGS="-g" +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ + +-int +-main () +-{ + +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext +-if { (ac_try="$ac_compile" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_compile") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_cxx_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest.$ac_objext; then +- ac_cv_prog_cxx_g=yes +-else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 + + +-fi + +-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +-fi + +-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +-fi + +-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +- ac_cxx_werror_flag=$ac_save_cxx_werror_flag +-fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cxx_g" >&5 +-$as_echo "$ac_cv_prog_cxx_g" >&6; } +-if test "$ac_test_CXXFLAGS" = set; then +- CXXFLAGS=$ac_save_CXXFLAGS +-elif test $ac_cv_prog_cxx_g = yes; then +- if test "$GXX" = yes; then +- CXXFLAGS="-g -O2" +- else +- CXXFLAGS="-g" +- fi +-else +- if test "$GXX" = yes; then +- CXXFLAGS="-O2" +- else +- CXXFLAGS= +- fi +-fi +-ac_ext=cpp +-ac_cpp='$CXXCPP $CPPFLAGS' +-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' +-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu + +-depcc="$CXX" am_compiler_list= + +-{ $as_echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 +-$as_echo_n "checking dependency style of $depcc... " >&6; } +-if test "${am_cv_CXX_dependencies_compiler_type+set}" = set; then +- $as_echo_n "(cached) " >&6 +-else +- if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then +- # We make a subdir and do the tests there. Otherwise we can end up +- # making bogus files that we don't know about and never remove. For +- # instance it was reported that on HP-UX the gcc test will end up +- # making a dummy file named `D' -- because `-MD' means `put the output +- # in D'. +- mkdir conftest.dir +- # Copy depcomp to subdir because otherwise we won't find it if we're +- # using a relative directory. +- cp "$am_depcomp" conftest.dir +- cd conftest.dir +- # We will build objects and dependencies in a subdirectory because +- # it helps to detect inapplicable dependency modes. For instance +- # both Tru64's cc and ICC support -MD to output dependencies as a +- # side effect of compilation, but ICC will put the dependencies in +- # the current directory while Tru64 will put them in the object +- # directory. +- mkdir sub + +- am_cv_CXX_dependencies_compiler_type=none +- if test "$am_compiler_list" = ""; then +- am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` +- fi +- for depmode in $am_compiler_list; do +- # Setup a source with many dependencies, because some compilers +- # like to wrap large dependency lists on column 80 (with \), and +- # we should not choose a depcomp mode which is confused by this. +- # +- # We need to recreate these files for each test, as the compiler may +- # overwrite some of them when testing with obscure command lines. +- # This happens at least with the AIX C compiler. +- : > sub/conftest.c +- for i in 1 2 3 4 5 6; do +- echo '#include "conftst'$i'.h"' >> sub/conftest.c +- # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with +- # Solaris 8's {/usr,}/bin/sh. +- touch sub/conftst$i.h +- done +- echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + +- case $depmode in +- nosideeffect) +- # after this tag, mechanisms are not by side-effect, so they'll +- # only be used when explicitly requested +- if test "x$enable_dependency_tracking" = xyes; then +- continue +- else +- break +- fi +- ;; +- none) break ;; +- esac +- # We check with `-c' and `-o' for the sake of the "dashmstdout" +- # mode. It turns out that the SunPro C++ compiler does not properly +- # handle `-M -o', and we need to detect this. +- if depmode=$depmode \ +- source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ +- depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ +- $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ +- >/dev/null 2>conftest.err && +- grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && +- grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && +- grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && +- ${MAKE-make} -s -f confmf > /dev/null 2>&1; then +- # icc doesn't choke on unknown options, it will just issue warnings +- # or remarks (even with -Werror). So we grep stderr for any message +- # that says an option was ignored or not supported. +- # When given -MP, icc 7.0 and 7.1 complain thusly: +- # icc: Command line warning: ignoring option '-M'; no argument required +- # The diagnosis changed in icc 8.0: +- # icc: Command line remark: option '-MP' not supported +- if (grep 'ignoring option' conftest.err || +- grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else +- am_cv_CXX_dependencies_compiler_type=$depmode +- break +- fi +- fi +- done + +- cd .. +- rm -rf conftest.dir +-else +- am_cv_CXX_dependencies_compiler_type=none +-fi + +-fi +-{ $as_echo "$as_me:$LINENO: result: $am_cv_CXX_dependencies_compiler_type" >&5 +-$as_echo "$am_cv_CXX_dependencies_compiler_type" >&6; } +-CXXDEPMODE=depmode=$am_cv_CXX_dependencies_compiler_type + +- if +- test "x$enable_dependency_tracking" != xno \ +- && test "$am_cv_CXX_dependencies_compiler_type" = gcc3; then +- am__fastdepCXX_TRUE= +- am__fastdepCXX_FALSE='#' +-else +- am__fastdepCXX_TRUE='#' +- am__fastdepCXX_FALSE= +-fi + + + + +-if test -n "$CXX" && ( test "X$CXX" != "Xno" && +- ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || +- (test "X$CXX" != "Xg++"))) ; then +- ac_ext=cpp +-ac_cpp='$CXXCPP $CPPFLAGS' +-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' +-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu +-{ $as_echo "$as_me:$LINENO: checking how to run the C++ preprocessor" >&5 +-$as_echo_n "checking how to run the C++ preprocessor... " >&6; } +-if test -z "$CXXCPP"; then +- if test "${ac_cv_prog_CXXCPP+set}" = set; then +- $as_echo_n "(cached) " >&6 +-else +- # Double quotes because CXXCPP needs to be expanded +- for CXXCPP in "$CXX -E" "/lib/cpp" +- do +- ac_preproc_ok=false +-for ac_cxx_preproc_warn_flag in '' yes +-do +- # Use a header file that comes with gcc, so configuring glibc +- # with a fresh cross-compiler works. +- # Prefer to if __STDC__ is defined, since +- # exists even on freestanding compilers. +- # On the NeXT, cc -E runs the code through the compiler's parser, +- # not just through cpp. "Syntax error" is here to catch this case. +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-#ifdef __STDC__ +-# include +-#else +-# include +-#endif +- Syntax error +-_ACEOF +-if { (ac_try="$ac_cpp conftest.$ac_ext" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } >/dev/null && { +- test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" || +- test ! -s conftest.err +- }; then +- : +-else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 + +- # Broken: fails on valid input. +-continue +-fi + +-rm -f conftest.err conftest.$ac_ext + +- # OK, works on sane cases. Now check whether nonexistent headers +- # can be detected and how. +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-#include +-_ACEOF +-if { (ac_try="$ac_cpp conftest.$ac_ext" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } >/dev/null && { +- test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" || +- test ! -s conftest.err +- }; then +- # Broken: success on invalid input. +-continue +-else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 + +- # Passes both tests. +-ac_preproc_ok=: +-break +-fi + +-rm -f conftest.err conftest.$ac_ext + +-done +-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +-rm -f conftest.err conftest.$ac_ext +-if $ac_preproc_ok; then +- break +-fi + +- done +- ac_cv_prog_CXXCPP=$CXXCPP + +-fi +- CXXCPP=$ac_cv_prog_CXXCPP +-else +- ac_cv_prog_CXXCPP=$CXXCPP +-fi +-{ $as_echo "$as_me:$LINENO: result: $CXXCPP" >&5 +-$as_echo "$CXXCPP" >&6; } +-ac_preproc_ok=false +-for ac_cxx_preproc_warn_flag in '' yes +-do +- # Use a header file that comes with gcc, so configuring glibc +- # with a fresh cross-compiler works. +- # Prefer to if __STDC__ is defined, since +- # exists even on freestanding compilers. +- # On the NeXT, cc -E runs the code through the compiler's parser, +- # not just through cpp. "Syntax error" is here to catch this case. +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-#ifdef __STDC__ +-# include +-#else +-# include +-#endif +- Syntax error +-_ACEOF +-if { (ac_try="$ac_cpp conftest.$ac_ext" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } >/dev/null && { +- test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" || +- test ! -s conftest.err +- }; then +- : +-else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 + +- # Broken: fails on valid input. +-continue +-fi + +-rm -f conftest.err conftest.$ac_ext + +- # OK, works on sane cases. Now check whether nonexistent headers +- # can be detected and how. +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-#include +-_ACEOF +-if { (ac_try="$ac_cpp conftest.$ac_ext" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } >/dev/null && { +- test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" || +- test ! -s conftest.err +- }; then +- # Broken: success on invalid input. +-continue +-else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++# If no C compiler was specified, use CC. ++LTCC=${LTCC-"$CC"} + +- # Passes both tests. +-ac_preproc_ok=: +-break +-fi ++# If no C compiler flags were specified, use CFLAGS. ++LTCFLAGS=${LTCFLAGS-"$CFLAGS"} + +-rm -f conftest.err conftest.$ac_ext ++# Allow CC to be a program name with arguments. ++compiler=$CC + +-done +-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +-rm -f conftest.err conftest.$ac_ext +-if $ac_preproc_ok; then +- : ++ ++# Check for command to grab the raw symbol name followed by C symbol from nm. ++{ echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5 ++echo $ECHO_N "checking command to parse $NM output from $compiler object... $ECHO_C" >&6; } ++if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- { { $as_echo "$as_me:$LINENO: error: C++ preprocessor \"$CXXCPP\" fails sanity check +-See \`config.log' for more details." >&5 +-$as_echo "$as_me: error: C++ preprocessor \"$CXXCPP\" fails sanity check +-See \`config.log' for more details." >&2;} +- { (exit 1); exit 1; }; } +-fi + +-ac_ext=cpp +-ac_cpp='$CXXCPP $CPPFLAGS' +-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' +-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu ++# These are sane defaults that work on at least a few old systems. ++# [They come from Ultrix. What could be older than Ultrix?!! ;)] + +-fi ++# Character class describing NM global symbol codes. ++symcode='[BCDEGRST]' + ++# Regexp to match symbols that can be accessed directly from C. ++sympat='\([_A-Za-z][_A-Za-z0-9]*\)' + +-ac_ext=f +-ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5' +-ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +-ac_compiler_gnu=$ac_cv_f77_compiler_gnu +-if test -n "$ac_tool_prefix"; then +- for ac_prog in g77 xlf f77 frt pgf77 cf77 fort77 fl32 af77 xlf90 f90 pgf90 pghpf epcf90 gfortran g95 xlf95 f95 fort ifort ifc efc pgf95 lf95 ftn +- do +- # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +-set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } +-if test "${ac_cv_prog_F77+set}" = set; then +- $as_echo_n "(cached) " >&6 +-else +- if test -n "$F77"; then +- ac_cv_prog_F77="$F77" # Let the user override the test. +-else +-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +-for as_dir in $PATH +-do +- IFS=$as_save_IFS +- test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do +- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then +- ac_cv_prog_F77="$ac_tool_prefix$ac_prog" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 +- break 2 ++# Define system-specific variables. ++case $host_os in ++aix*) ++ symcode='[BCDT]' ++ ;; ++cygwin* | mingw* | pw32*) ++ symcode='[ABCDGISTW]' ++ ;; ++hpux*) ++ if test "$host_cpu" = ia64; then ++ symcode='[ABCDEGRST]' + fi +-done +-done +-IFS=$as_save_IFS ++ ;; ++irix* | nonstopux*) ++ symcode='[BCDEGRST]' ++ ;; ++osf*) ++ symcode='[BCDEGQRST]' ++ ;; ++solaris*) ++ symcode='[BDRT]' ++ ;; ++sco3.2v5*) ++ symcode='[DT]' ++ ;; ++sysv4.2uw2*) ++ symcode='[DT]' ++ ;; ++sysv5* | sco5v6* | unixware* | OpenUNIX*) ++ symcode='[ABDT]' ++ ;; ++sysv4) ++ symcode='[DFNSTU]' ++ ;; ++esac + +-fi +-fi +-F77=$ac_cv_prog_F77 +-if test -n "$F77"; then +- { $as_echo "$as_me:$LINENO: result: $F77" >&5 +-$as_echo "$F77" >&6; } +-else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } +-fi ++# If we're using GNU nm, then use its standard symbol codes. ++case `$NM -V 2>&1` in ++*GNU* | *'with BFD'*) ++ symcode='[ABCDGIRSTW]' ;; ++esac + ++# Transform an extracted symbol line into a proper C declaration. ++# Some systems (esp. on ia64) link data and code symbols differently, ++# so use this general approach. ++lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" + +- test -n "$F77" && break +- done +-fi +-if test -z "$F77"; then +- ac_ct_F77=$F77 +- for ac_prog in g77 xlf f77 frt pgf77 cf77 fort77 fl32 af77 xlf90 f90 pgf90 pghpf epcf90 gfortran g95 xlf95 f95 fort ifort ifc efc pgf95 lf95 ftn +-do +- # Extract the first word of "$ac_prog", so it can be a program name with args. +-set dummy $ac_prog; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } +-if test "${ac_cv_prog_ac_ct_F77+set}" = set; then +- $as_echo_n "(cached) " >&6 +-else +- if test -n "$ac_ct_F77"; then +- ac_cv_prog_ac_ct_F77="$ac_ct_F77" # Let the user override the test. +-else +-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +-for as_dir in $PATH +-do +- IFS=$as_save_IFS +- test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do +- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then +- ac_cv_prog_ac_ct_F77="$ac_prog" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 +- break 2 +- fi +-done +-done +-IFS=$as_save_IFS ++# Transform an extracted symbol line into symbol name and symbol address ++lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (void *) \&\2},/p'" ++lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"lib\2\", (void *) \&\2},/p'" + +-fi +-fi +-ac_ct_F77=$ac_cv_prog_ac_ct_F77 +-if test -n "$ac_ct_F77"; then +- { $as_echo "$as_me:$LINENO: result: $ac_ct_F77" >&5 +-$as_echo "$ac_ct_F77" >&6; } +-else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } +-fi ++# Handle CRLF in mingw tool chain ++opt_cr= ++case $build_os in ++mingw*) ++ opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp ++ ;; ++esac + ++# Try without a prefix underscore, then with it. ++for ac_symprfx in "" "_"; do + +- test -n "$ac_ct_F77" && break +-done ++ # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. ++ symxfrm="\\1 $ac_symprfx\\2 \\2" + +- if test "x$ac_ct_F77" = x; then +- F77="" ++ # Write the raw and C identifiers. ++ if test "$lt_cv_nm_interface" = "MS dumpbin"; then ++ # Fake it for dumpbin and say T for any non-static function ++ # and D for any global variable. ++ # Also find C++ and __fastcall symbols from MSVC++, ++ # which start with @ or ?. ++ lt_cv_sys_global_symbol_pipe="$AWK '"\ ++" {last_section=section; section=\$ 3};"\ ++" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ ++" \$ 0!~/External *\|/{next};"\ ++" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\ ++" {if(hide[section]) next};"\ ++" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\ ++" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\ ++" s[1]~/^[@?]/{print s[1], s[1]; next};"\ ++" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\ ++" ' prfx=^$ac_symprfx" + else +- case $cross_compiling:$ac_tool_warned in +-yes:) +-{ $as_echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools +-whose name does not start with the host triplet. If you think this +-configuration is useful to you, please write to autoconf@gnu.org." >&5 +-$as_echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools +-whose name does not start with the host triplet. If you think this +-configuration is useful to you, please write to autoconf@gnu.org." >&2;} +-ac_tool_warned=yes ;; +-esac +- F77=$ac_ct_F77 ++ lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" + fi +-fi + ++ # Check to see that the pipe works correctly. ++ pipe_works=no + +-# Provide some information about the compiler. +-$as_echo "$as_me:$LINENO: checking for Fortran 77 compiler version" >&5 +-set X $ac_compile +-ac_compiler=$2 +-{ (ac_try="$ac_compiler --version >&5" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_compiler --version >&5") 2>&5 +- ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } +-{ (ac_try="$ac_compiler -v >&5" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_compiler -v >&5") 2>&5 ++ rm -f conftest* ++ cat > conftest.$ac_ext <<_LT_EOF ++#ifdef __cplusplus ++extern "C" { ++#endif ++char nm_test_var; ++void nm_test_func(void); ++void nm_test_func(void){} ++#ifdef __cplusplus ++} ++#endif ++int main(){nm_test_var='a';nm_test_func();return(0);} ++_LT_EOF ++ ++ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ++ (eval $ac_compile) 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } +-{ (ac_try="$ac_compiler -V >&5" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_compiler -V >&5") 2>&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ # Now try to grab the symbols. ++ nlist=conftest.nm ++ if { (eval echo "$as_me:$LINENO: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\"") >&5 ++ (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } +-rm -f a.out ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && test -s "$nlist"; then ++ # Try sorting and uniquifying the output. ++ if sort "$nlist" | uniq > "$nlist"T; then ++ mv -f "$nlist"T "$nlist" ++ else ++ rm -f "$nlist"T ++ fi + +-# If we don't use `.F' as extension, the preprocessor is not run on the +-# input file. (Note that this only needs to work for GNU compilers.) +-ac_save_ext=$ac_ext +-ac_ext=F +-{ $as_echo "$as_me:$LINENO: checking whether we are using the GNU Fortran 77 compiler" >&5 +-$as_echo_n "checking whether we are using the GNU Fortran 77 compiler... " >&6; } +-if test "${ac_cv_f77_compiler_gnu+set}" = set; then +- $as_echo_n "(cached) " >&6 +-else +- cat >conftest.$ac_ext <<_ACEOF +- program main +-#ifndef __GNUC__ +- choke me ++ # Make sure that we snagged all the symbols we need. ++ if $GREP ' nm_test_var$' "$nlist" >/dev/null; then ++ if $GREP ' nm_test_func$' "$nlist" >/dev/null; then ++ cat <<_LT_EOF > conftest.$ac_ext ++#ifdef __cplusplus ++extern "C" { + #endif + +- end +-_ACEOF +-rm -f conftest.$ac_objext +-if { (ac_try="$ac_compile" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_compile") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_f77_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest.$ac_objext; then +- ac_compiler_gnu=yes +-else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++_LT_EOF ++ # Now generate the symbol file. ++ eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext' + +- ac_compiler_gnu=no +-fi ++ cat <<_LT_EOF >> conftest.$ac_ext + +-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +-ac_cv_f77_compiler_gnu=$ac_compiler_gnu ++/* The mapping between symbol names and symbols. */ ++const struct { ++ const char *name; ++ void *address; ++} ++lt__PROGRAM__LTX_preloaded_symbols[] = ++{ ++ { "@PROGRAM@", (void *) 0 }, ++_LT_EOF ++ $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext ++ cat <<\_LT_EOF >> conftest.$ac_ext ++ {0, (void *) 0} ++}; + +-fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_f77_compiler_gnu" >&5 +-$as_echo "$ac_cv_f77_compiler_gnu" >&6; } +-ac_ext=$ac_save_ext +-ac_test_FFLAGS=${FFLAGS+set} +-ac_save_FFLAGS=$FFLAGS +-FFLAGS= +-{ $as_echo "$as_me:$LINENO: checking whether $F77 accepts -g" >&5 +-$as_echo_n "checking whether $F77 accepts -g... " >&6; } +-if test "${ac_cv_prog_f77_g+set}" = set; then +- $as_echo_n "(cached) " >&6 +-else +- FFLAGS=-g +-cat >conftest.$ac_ext <<_ACEOF +- program main ++/* This works around a problem in FreeBSD linker */ ++#ifdef FREEBSD_WORKAROUND ++static const void *lt_preloaded_setup() { ++ return lt__PROGRAM__LTX_preloaded_symbols; ++} ++#endif + +- end +-_ACEOF +-rm -f conftest.$ac_objext +-if { (ac_try="$ac_compile" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_compile") 2>conftest.er1 ++#ifdef __cplusplus ++} ++#endif ++_LT_EOF ++ # Now try linking the two files. ++ mv conftest.$ac_objext conftstm.$ac_objext ++ lt_save_LIBS="$LIBS" ++ lt_save_CFLAGS="$CFLAGS" ++ LIBS="conftstm.$ac_objext" ++ CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag" ++ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ++ (eval $ac_link) 2>&5 + ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_f77_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest.$ac_objext; then +- ac_cv_prog_f77_g=yes +-else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- ac_cv_prog_f77_g=no +-fi +- +-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +- +-fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_prog_f77_g" >&5 +-$as_echo "$ac_cv_prog_f77_g" >&6; } +-if test "$ac_test_FFLAGS" = set; then +- FFLAGS=$ac_save_FFLAGS +-elif test $ac_cv_prog_f77_g = yes; then +- if test "x$ac_cv_f77_compiler_gnu" = xyes; then +- FFLAGS="-g -O2" ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && test -s conftest${ac_exeext}; then ++ pipe_works=yes ++ fi ++ LIBS="$lt_save_LIBS" ++ CFLAGS="$lt_save_CFLAGS" ++ else ++ echo "cannot find nm_test_func in $nlist" >&5 ++ fi ++ else ++ echo "cannot find nm_test_var in $nlist" >&5 ++ fi ++ else ++ echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5 ++ fi + else +- FFLAGS="-g" ++ echo "$progname: failed program was:" >&5 ++ cat conftest.$ac_ext >&5 + fi +-else +- if test "x$ac_cv_f77_compiler_gnu" = xyes; then +- FFLAGS="-O2" ++ rm -rf conftest* conftst* ++ ++ # Do not use the global_symbol_pipe unless it works. ++ if test "$pipe_works" = yes; then ++ break + else +- FFLAGS= ++ lt_cv_sys_global_symbol_pipe= + fi ++done ++ + fi + +-if test $ac_compiler_gnu = yes; then +- G77=yes ++if test -z "$lt_cv_sys_global_symbol_pipe"; then ++ lt_cv_sys_global_symbol_to_cdecl= ++fi ++if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then ++ { echo "$as_me:$LINENO: result: failed" >&5 ++echo "${ECHO_T}failed" >&6; } + else +- G77= ++ { echo "$as_me:$LINENO: result: ok" >&5 ++echo "${ECHO_T}ok" >&6; } + fi +-ac_ext=c +-ac_cpp='$CPP $CPPFLAGS' +-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +-ac_compiler_gnu=$ac_cv_c_compiler_gnu + + + +-# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers! +-# find the maximum length of command line arguments +-{ $as_echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5 +-$as_echo_n "checking the maximum length of command line arguments... " >&6; } +-if test "${lt_cv_sys_max_cmd_len+set}" = set; then +- $as_echo_n "(cached) " >&6 +-else +- i=0 +- teststring="ABCD" + +- case $build_os in +- msdosdjgpp*) +- # On DJGPP, this test can blow up pretty badly due to problems in libc +- # (any single argument exceeding 2000 bytes causes a buffer overrun +- # during glob expansion). Even if it were fixed, the result of this +- # check would be larger than it should be. +- lt_cv_sys_max_cmd_len=12288; # 12K is about right +- ;; + +- gnu*) +- # Under GNU Hurd, this test is not required because there is +- # no limit to the length of command line arguments. +- # Libtool will interpret -1 as no limit whatsoever +- lt_cv_sys_max_cmd_len=-1; +- ;; + +- cygwin* | mingw*) +- # On Win9x/ME, this test blows up -- it succeeds, but takes +- # about 5 minutes as the teststring grows exponentially. +- # Worse, since 9x/ME are not pre-emptively multitasking, +- # you end up with a "frozen" computer, even though with patience +- # the test eventually succeeds (with a max line length of 256k). +- # Instead, let's just punt: use the minimum linelength reported by +- # all of the supported platforms: 8192 (on NT/2K/XP). +- lt_cv_sys_max_cmd_len=8192; +- ;; + +- amigaos*) +- # On AmigaOS with pdksh, this test takes hours, literally. +- # So we just punt and use a minimum line length of 8192. +- lt_cv_sys_max_cmd_len=8192; +- ;; + +- netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) +- # This has been around since 386BSD, at least. Likely further. +- if test -x /sbin/sysctl; then +- lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` +- elif test -x /usr/sbin/sysctl; then +- lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` +- else +- lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs +- fi +- # And add a safety zone +- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` +- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` +- ;; + +- interix*) +- # We know the value 262144 and hardcode it with a safety zone (like BSD) +- lt_cv_sys_max_cmd_len=196608 +- ;; + +- osf*) +- # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure +- # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not +- # nice to cause kernel panics so lets avoid the loop below. +- # First set a reasonable default. +- lt_cv_sys_max_cmd_len=16384 +- # +- if test -x /sbin/sysconfig; then +- case `/sbin/sysconfig -q proc exec_disable_arg_limit` in +- *1*) lt_cv_sys_max_cmd_len=-1 ;; +- esac +- fi +- ;; +- sco3.2v5*) +- lt_cv_sys_max_cmd_len=102400 +- ;; +- sysv5* | sco5v6* | sysv4.2uw2*) +- kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` +- if test -n "$kargmax"; then +- lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ ]//'` +- else +- lt_cv_sys_max_cmd_len=32768 +- fi +- ;; +- *) +- lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` +- if test -n "$lt_cv_sys_max_cmd_len"; then +- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` +- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` +- else +- SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} +- while (test "X"`$SHELL $0 --fallback-echo "X$teststring" 2>/dev/null` \ +- = "XX$teststring") >/dev/null 2>&1 && +- new_result=`expr "X$teststring" : ".*" 2>&1` && +- lt_cv_sys_max_cmd_len=$new_result && +- test $i != 17 # 1/2 MB should be enough +- do +- i=`expr $i + 1` +- teststring=$teststring$teststring +- done +- teststring= +- # Add a significant safety factor because C++ compilers can tack on massive +- # amounts of additional arguments before passing them to the linker. +- # It appears as though 1/2 is a usable value. +- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` +- fi +- ;; +- esac + +-fi + +-if test -n $lt_cv_sys_max_cmd_len ; then +- { $as_echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5 +-$as_echo "$lt_cv_sys_max_cmd_len" >&6; } +-else +- { $as_echo "$as_me:$LINENO: result: none" >&5 +-$as_echo "none" >&6; } +-fi + + + + + +-# Check for command to grab the raw symbol name followed by C symbol from nm. +-{ $as_echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5 +-$as_echo_n "checking command to parse $NM output from $compiler object... " >&6; } +-if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then +- $as_echo_n "(cached) " >&6 +-else + +-# These are sane defaults that work on at least a few old systems. +-# [They come from Ultrix. What could be older than Ultrix?!! ;)] + +-# Character class describing NM global symbol codes. +-symcode='[BCDEGRST]' + +-# Regexp to match symbols that can be accessed directly from C. +-sympat='\([_A-Za-z][_A-Za-z0-9]*\)' + +-# Transform an extracted symbol line into a proper C declaration +-lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'" + +-# Transform an extracted symbol line into symbol name and symbol address +-lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" ++# Check whether --enable-libtool-lock was given. ++if test "${enable_libtool_lock+set}" = set; then ++ enableval=$enable_libtool_lock; ++fi + +-# Define system-specific variables. +-case $host_os in +-aix*) +- symcode='[BCDT]' +- ;; +-cygwin* | mingw* | pw32*) +- symcode='[ABCDGISTW]' +- ;; +-hpux*) # Its linker distinguishes data from code symbols +- if test "$host_cpu" = ia64; then +- symcode='[ABCDEGRST]' +- fi +- lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" +- lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" +- ;; +-linux* | k*bsd*-gnu) +- if test "$host_cpu" = ia64; then +- symcode='[ABCDGIRSTW]' +- lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" +- lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" +- fi +- ;; +-irix* | nonstopux*) +- symcode='[BCDEGRST]' +- ;; +-osf*) +- symcode='[BCDEGQRST]' +- ;; +-solaris*) +- symcode='[BDRT]' +- ;; +-sco3.2v5*) +- symcode='[DT]' +- ;; +-sysv4.2uw2*) +- symcode='[DT]' +- ;; +-sysv5* | sco5v6* | unixware* | OpenUNIX*) +- symcode='[ABDT]' +- ;; +-sysv4) +- symcode='[DFNSTU]' +- ;; +-esac +- +-# Handle CRLF in mingw tool chain +-opt_cr= +-case $build_os in +-mingw*) +- opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp +- ;; +-esac +- +-# If we're using GNU nm, then use its standard symbol codes. +-case `$NM -V 2>&1` in +-*GNU* | *'with BFD'*) +- symcode='[ABCDGIRSTW]' ;; +-esac +- +-# Try without a prefix undercore, then with it. +-for ac_symprfx in "" "_"; do +- +- # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. +- symxfrm="\\1 $ac_symprfx\\2 \\2" +- +- # Write the raw and C identifiers. +- lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" +- +- # Check to see that the pipe works correctly. +- pipe_works=no +- +- rm -f conftest* +- cat > conftest.$ac_ext < conftest.$ac_ext + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then +- # Now try to grab the symbols. +- nlist=conftest.nm +- if { (eval echo "$as_me:$LINENO: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\"") >&5 +- (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5 +- ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && test -s "$nlist"; then +- # Try sorting and uniquifying the output. +- if sort "$nlist" | uniq > "$nlist"T; then +- mv -f "$nlist"T "$nlist" +- else +- rm -f "$nlist"T +- fi +- +- # Make sure that we snagged all the symbols we need. +- if grep ' nm_test_var$' "$nlist" >/dev/null; then +- if grep ' nm_test_func$' "$nlist" >/dev/null; then +- cat < conftest.$ac_ext +-#ifdef __cplusplus +-extern "C" { +-#endif +- +-EOF +- # Now generate the symbol file. +- eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext' +- +- cat <> conftest.$ac_ext +-#if defined (__STDC__) && __STDC__ +-# define lt_ptr_t void * +-#else +-# define lt_ptr_t char * +-# define const +-#endif +- +-/* The mapping between symbol names and symbols. */ +-const struct { +- const char *name; +- lt_ptr_t address; +-} +-lt_preloaded_symbols[] = +-{ +-EOF +- $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext +- cat <<\EOF >> conftest.$ac_ext +- {0, (lt_ptr_t) 0} +-}; +- +-#ifdef __cplusplus +-} +-#endif +-EOF +- # Now try linking the two files. +- mv conftest.$ac_objext conftstm.$ac_objext +- lt_save_LIBS="$LIBS" +- lt_save_CFLAGS="$CFLAGS" +- LIBS="conftstm.$ac_objext" +- CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag" +- if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>&5 ++ case `/usr/bin/file conftest.$ac_objext` in ++ *ELF-32*) ++ HPUX_IA64_MODE="32" ++ ;; ++ *ELF-64*) ++ HPUX_IA64_MODE="64" ++ ;; ++ esac ++ fi ++ rm -rf conftest* ++ ;; ++*-*-irix6*) ++ # Find out which ABI we are using. ++ echo '#line 7481 "configure"' > conftest.$ac_ext ++ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ++ (eval $ac_compile) 2>&5 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && test -s conftest${ac_exeext}; then +- pipe_works=yes +- fi +- LIBS="$lt_save_LIBS" +- CFLAGS="$lt_save_CFLAGS" +- else +- echo "cannot find nm_test_func in $nlist" >&5 +- fi +- else +- echo "cannot find nm_test_var in $nlist" >&5 +- fi ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ if test "$lt_cv_prog_gnu_ld" = yes; then ++ case `/usr/bin/file conftest.$ac_objext` in ++ *32-bit*) ++ LD="${LD-ld} -melf32bsmip" ++ ;; ++ *N32*) ++ LD="${LD-ld} -melf32bmipn32" ++ ;; ++ *64-bit*) ++ LD="${LD-ld} -melf64bmip" ++ ;; ++ esac + else +- echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5 ++ case `/usr/bin/file conftest.$ac_objext` in ++ *32-bit*) ++ LD="${LD-ld} -32" ++ ;; ++ *N32*) ++ LD="${LD-ld} -n32" ++ ;; ++ *64-bit*) ++ LD="${LD-ld} -64" ++ ;; ++ esac + fi +- else +- echo "$progname: failed program was:" >&5 +- cat conftest.$ac_ext >&5 + fi +- rm -rf conftest* conftst* ++ rm -rf conftest* ++ ;; + +- # Do not use the global_symbol_pipe unless it works. +- if test "$pipe_works" = yes; then +- break +- else +- lt_cv_sys_global_symbol_pipe= ++x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \ ++s390*-*linux*|s390*-*tpf*|sparc*-*linux*) ++ # Find out which ABI we are using. ++ echo 'int i;' > conftest.$ac_ext ++ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ++ (eval $ac_compile) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ case `/usr/bin/file conftest.o` in ++ *32-bit*) ++ case $host in ++ x86_64-*kfreebsd*-gnu) ++ LD="${LD-ld} -m elf_i386_fbsd" ++ ;; ++ x86_64-*linux*) ++ LD="${LD-ld} -m elf_i386" ++ ;; ++ ppc64-*linux*|powerpc64-*linux*) ++ LD="${LD-ld} -m elf32ppclinux" ++ ;; ++ s390x-*linux*) ++ LD="${LD-ld} -m elf_s390" ++ ;; ++ sparc64-*linux*) ++ LD="${LD-ld} -m elf32_sparc" ++ ;; ++ esac ++ ;; ++ *64-bit*) ++ case $host in ++ x86_64-*kfreebsd*-gnu) ++ LD="${LD-ld} -m elf_x86_64_fbsd" ++ ;; ++ x86_64-*linux*) ++ LD="${LD-ld} -m elf_x86_64" ++ ;; ++ ppc*-*linux*|powerpc*-*linux*) ++ LD="${LD-ld} -m elf64ppc" ++ ;; ++ s390*-*linux*|s390*-*tpf*) ++ LD="${LD-ld} -m elf64_s390" ++ ;; ++ sparc*-*linux*) ++ LD="${LD-ld} -m elf64_sparc" ++ ;; ++ esac ++ ;; ++ esac + fi +-done +- +-fi ++ rm -rf conftest* ++ ;; + +-if test -z "$lt_cv_sys_global_symbol_pipe"; then +- lt_cv_sys_global_symbol_to_cdecl= +-fi +-if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then +- { $as_echo "$as_me:$LINENO: result: failed" >&5 +-$as_echo "failed" >&6; } ++*-*-sco3.2v5*) ++ # On SCO OpenServer 5, we need -belf to get full-featured binaries. ++ SAVE_CFLAGS="$CFLAGS" ++ CFLAGS="$CFLAGS -belf" ++ { echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5 ++echo $ECHO_N "checking whether the C compiler needs -belf... $ECHO_C" >&6; } ++if test "${lt_cv_cc_needs_belf+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- { $as_echo "$as_me:$LINENO: result: ok" >&5 +-$as_echo "ok" >&6; } +-fi ++ ac_ext=c ++ac_cpp='$CPP $CPPFLAGS' ++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_c_compiler_gnu + +-{ $as_echo "$as_me:$LINENO: checking for objdir" >&5 +-$as_echo_n "checking for objdir... " >&6; } +-if test "${lt_cv_objdir+set}" = set; then +- $as_echo_n "(cached) " >&6 +-else +- rm -f .libs 2>/dev/null +-mkdir .libs 2>/dev/null +-if test -d .libs; then +- lt_cv_objdir=.libs +-else +- # MS-DOS does not allow filenames that begin with a dot. +- lt_cv_objdir=_libs +-fi +-rmdir .libs 2>/dev/null +-fi +-{ $as_echo "$as_me:$LINENO: result: $lt_cv_objdir" >&5 +-$as_echo "$lt_cv_objdir" >&6; } +-objdir=$lt_cv_objdir ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ + ++int ++main () ++{ + ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ lt_cv_cc_needs_belf=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 + ++ lt_cv_cc_needs_belf=no ++fi + ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++ ac_ext=c ++ac_cpp='$CPP $CPPFLAGS' ++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_c_compiler_gnu + +-case $host_os in +-aix3*) +- # AIX sometimes has problems with the GCC collect2 program. For some +- # reason, if we set the COLLECT_NAMES environment variable, the problems +- # vanish in a puff of smoke. +- if test "X${COLLECT_NAMES+set}" != Xset; then +- COLLECT_NAMES= +- export COLLECT_NAMES ++fi ++{ echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5 ++echo "${ECHO_T}$lt_cv_cc_needs_belf" >&6; } ++ if test x"$lt_cv_cc_needs_belf" != x"yes"; then ++ # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf ++ CFLAGS="$SAVE_CFLAGS" + fi + ;; +-esac +- +-# Sed substitution that helps us do robust quoting. It backslashifies +-# metacharacters that are still active within double-quoted strings. +-Xsed='sed -e 1s/^X//' +-sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g' +- +-# Same as above, but do not quote variable references. +-double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g' +- +-# Sed substitution to delay expansion of an escaped shell variable in a +-# double_quote_subst'ed string. +-delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' +- +-# Sed substitution to avoid accidental globbing in evaled expressions +-no_glob_subst='s/\*/\\\*/g' +- +-# Constants: +-rm="rm -f" ++sparc*-*solaris*) ++ # Find out which ABI we are using. ++ echo 'int i;' > conftest.$ac_ext ++ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ++ (eval $ac_compile) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ case `/usr/bin/file conftest.o` in ++ *64-bit*) ++ case $lt_cv_prog_gnu_ld in ++ yes*) LD="${LD-ld} -m elf64_sparc" ;; ++ *) ++ if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then ++ LD="${LD-ld} -64" ++ fi ++ ;; ++ esac ++ ;; ++ esac ++ fi ++ rm -rf conftest* ++ ;; ++esac + +-# Global variables: +-default_ofile=libtool +-can_build_shared=yes ++need_locks="$enable_libtool_lock" + +-# All known linkers require a `.a' archive for static linking (except MSVC, +-# which needs '.lib'). +-libext=a +-ltmain="$ac_aux_dir/ltmain.sh" +-ofile="$default_ofile" +-with_gnu_ld="$lt_cv_prog_gnu_ld" + +-if test -n "$ac_tool_prefix"; then +- # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args. +-set dummy ${ac_tool_prefix}ar; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } +-if test "${ac_cv_prog_AR+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ case $host_os in ++ rhapsody* | darwin*) ++ if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args. ++set dummy ${ac_tool_prefix}dsymutil; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_DSYMUTIL+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- if test -n "$AR"; then +- ac_cv_prog_AR="$AR" # Let the user override the test. ++ if test -n "$DSYMUTIL"; then ++ ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test. + else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + for as_dir in $PATH +@@ -8484,8 +7686,8 @@ + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then +- ac_cv_prog_AR="${ac_tool_prefix}ar" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +@@ -8494,28 +7696,28 @@ + + fi + fi +-AR=$ac_cv_prog_AR +-if test -n "$AR"; then +- { $as_echo "$as_me:$LINENO: result: $AR" >&5 +-$as_echo "$AR" >&6; } ++DSYMUTIL=$ac_cv_prog_DSYMUTIL ++if test -n "$DSYMUTIL"; then ++ { echo "$as_me:$LINENO: result: $DSYMUTIL" >&5 ++echo "${ECHO_T}$DSYMUTIL" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + + + fi +-if test -z "$ac_cv_prog_AR"; then +- ac_ct_AR=$AR +- # Extract the first word of "ar", so it can be a program name with args. +-set dummy ar; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } +-if test "${ac_cv_prog_ac_ct_AR+set}" = set; then +- $as_echo_n "(cached) " >&6 ++if test -z "$ac_cv_prog_DSYMUTIL"; then ++ ac_ct_DSYMUTIL=$DSYMUTIL ++ # Extract the first word of "dsymutil", so it can be a program name with args. ++set dummy dsymutil; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_ac_ct_DSYMUTIL+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- if test -n "$ac_ct_AR"; then +- ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test. ++ if test -n "$ac_ct_DSYMUTIL"; then ++ ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test. + else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + for as_dir in $PATH +@@ -8524,8 +7726,8 @@ + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then +- ac_cv_prog_ac_ct_AR="ar" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ ac_cv_prog_ac_ct_DSYMUTIL="dsymutil" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +@@ -8534,44 +7736,44 @@ + + fi + fi +-ac_ct_AR=$ac_cv_prog_ac_ct_AR +-if test -n "$ac_ct_AR"; then +- { $as_echo "$as_me:$LINENO: result: $ac_ct_AR" >&5 +-$as_echo "$ac_ct_AR" >&6; } ++ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL ++if test -n "$ac_ct_DSYMUTIL"; then ++ { echo "$as_me:$LINENO: result: $ac_ct_DSYMUTIL" >&5 ++echo "${ECHO_T}$ac_ct_DSYMUTIL" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + +- if test "x$ac_ct_AR" = x; then +- AR="false" ++ if test "x$ac_ct_DSYMUTIL" = x; then ++ DSYMUTIL=":" + else + case $cross_compiling:$ac_tool_warned in + yes:) +-{ $as_echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools + whose name does not start with the host triplet. If you think this + configuration is useful to you, please write to autoconf@gnu.org." >&5 +-$as_echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools + whose name does not start with the host triplet. If you think this + configuration is useful to you, please write to autoconf@gnu.org." >&2;} + ac_tool_warned=yes ;; + esac +- AR=$ac_ct_AR ++ DSYMUTIL=$ac_ct_DSYMUTIL + fi + else +- AR="$ac_cv_prog_AR" ++ DSYMUTIL="$ac_cv_prog_DSYMUTIL" + fi + +-if test -n "$ac_tool_prefix"; then +- # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. +-set dummy ${ac_tool_prefix}ranlib; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } +-if test "${ac_cv_prog_RANLIB+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args. ++set dummy ${ac_tool_prefix}nmedit; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_NMEDIT+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- if test -n "$RANLIB"; then +- ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. ++ if test -n "$NMEDIT"; then ++ ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test. + else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + for as_dir in $PATH +@@ -8580,8 +7782,8 @@ + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then +- ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +@@ -8590,28 +7792,28 @@ + + fi + fi +-RANLIB=$ac_cv_prog_RANLIB +-if test -n "$RANLIB"; then +- { $as_echo "$as_me:$LINENO: result: $RANLIB" >&5 +-$as_echo "$RANLIB" >&6; } ++NMEDIT=$ac_cv_prog_NMEDIT ++if test -n "$NMEDIT"; then ++ { echo "$as_me:$LINENO: result: $NMEDIT" >&5 ++echo "${ECHO_T}$NMEDIT" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + + + fi +-if test -z "$ac_cv_prog_RANLIB"; then +- ac_ct_RANLIB=$RANLIB +- # Extract the first word of "ranlib", so it can be a program name with args. +-set dummy ranlib; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } +-if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then +- $as_echo_n "(cached) " >&6 ++if test -z "$ac_cv_prog_NMEDIT"; then ++ ac_ct_NMEDIT=$NMEDIT ++ # Extract the first word of "nmedit", so it can be a program name with args. ++set dummy nmedit; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_ac_ct_NMEDIT+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- if test -n "$ac_ct_RANLIB"; then +- ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. ++ if test -n "$ac_ct_NMEDIT"; then ++ ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test. + else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + for as_dir in $PATH +@@ -8620,8 +7822,8 @@ + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then +- ac_cv_prog_ac_ct_RANLIB="ranlib" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ ac_cv_prog_ac_ct_NMEDIT="nmedit" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +@@ -8630,44 +7832,44 @@ + + fi + fi +-ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB +-if test -n "$ac_ct_RANLIB"; then +- { $as_echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 +-$as_echo "$ac_ct_RANLIB" >&6; } ++ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT ++if test -n "$ac_ct_NMEDIT"; then ++ { echo "$as_me:$LINENO: result: $ac_ct_NMEDIT" >&5 ++echo "${ECHO_T}$ac_ct_NMEDIT" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + +- if test "x$ac_ct_RANLIB" = x; then +- RANLIB=":" ++ if test "x$ac_ct_NMEDIT" = x; then ++ NMEDIT=":" + else + case $cross_compiling:$ac_tool_warned in + yes:) +-{ $as_echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools + whose name does not start with the host triplet. If you think this + configuration is useful to you, please write to autoconf@gnu.org." >&5 +-$as_echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools + whose name does not start with the host triplet. If you think this + configuration is useful to you, please write to autoconf@gnu.org." >&2;} + ac_tool_warned=yes ;; + esac +- RANLIB=$ac_ct_RANLIB ++ NMEDIT=$ac_ct_NMEDIT + fi + else +- RANLIB="$ac_cv_prog_RANLIB" ++ NMEDIT="$ac_cv_prog_NMEDIT" + fi + +-if test -n "$ac_tool_prefix"; then +- # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. +-set dummy ${ac_tool_prefix}strip; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } +-if test "${ac_cv_prog_STRIP+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args. ++set dummy ${ac_tool_prefix}lipo; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_LIPO+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- if test -n "$STRIP"; then +- ac_cv_prog_STRIP="$STRIP" # Let the user override the test. ++ if test -n "$LIPO"; then ++ ac_cv_prog_LIPO="$LIPO" # Let the user override the test. + else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + for as_dir in $PATH +@@ -8676,8 +7878,8 @@ + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then +- ac_cv_prog_STRIP="${ac_tool_prefix}strip" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ ac_cv_prog_LIPO="${ac_tool_prefix}lipo" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +@@ -8686,28 +7888,28 @@ + + fi + fi +-STRIP=$ac_cv_prog_STRIP +-if test -n "$STRIP"; then +- { $as_echo "$as_me:$LINENO: result: $STRIP" >&5 +-$as_echo "$STRIP" >&6; } ++LIPO=$ac_cv_prog_LIPO ++if test -n "$LIPO"; then ++ { echo "$as_me:$LINENO: result: $LIPO" >&5 ++echo "${ECHO_T}$LIPO" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + + + fi +-if test -z "$ac_cv_prog_STRIP"; then +- ac_ct_STRIP=$STRIP +- # Extract the first word of "strip", so it can be a program name with args. +-set dummy strip; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } +-if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then +- $as_echo_n "(cached) " >&6 ++if test -z "$ac_cv_prog_LIPO"; then ++ ac_ct_LIPO=$LIPO ++ # Extract the first word of "lipo", so it can be a program name with args. ++set dummy lipo; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_ac_ct_LIPO+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- if test -n "$ac_ct_STRIP"; then +- ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. ++ if test -n "$ac_ct_LIPO"; then ++ ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test. + else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + for as_dir in $PATH +@@ -8716,8 +7918,8 @@ + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then +- ac_cv_prog_ac_ct_STRIP="strip" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ ac_cv_prog_ac_ct_LIPO="lipo" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +@@ -8726,232 +7928,140 @@ + + fi + fi +-ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP +-if test -n "$ac_ct_STRIP"; then +- { $as_echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 +-$as_echo "$ac_ct_STRIP" >&6; } ++ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO ++if test -n "$ac_ct_LIPO"; then ++ { echo "$as_me:$LINENO: result: $ac_ct_LIPO" >&5 ++echo "${ECHO_T}$ac_ct_LIPO" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + +- if test "x$ac_ct_STRIP" = x; then +- STRIP=":" ++ if test "x$ac_ct_LIPO" = x; then ++ LIPO=":" + else + case $cross_compiling:$ac_tool_warned in + yes:) +-{ $as_echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools + whose name does not start with the host triplet. If you think this + configuration is useful to you, please write to autoconf@gnu.org." >&5 +-$as_echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools + whose name does not start with the host triplet. If you think this + configuration is useful to you, please write to autoconf@gnu.org." >&2;} + ac_tool_warned=yes ;; + esac +- STRIP=$ac_ct_STRIP ++ LIPO=$ac_ct_LIPO + fi + else +- STRIP="$ac_cv_prog_STRIP" ++ LIPO="$ac_cv_prog_LIPO" + fi + ++ if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args. ++set dummy ${ac_tool_prefix}otool; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_OTOOL+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$OTOOL"; then ++ ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_OTOOL="${ac_tool_prefix}otool" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS + +-old_CC="$CC" +-old_CFLAGS="$CFLAGS" +- +-# Set sane defaults for various variables +-test -z "$AR" && AR=ar +-test -z "$AR_FLAGS" && AR_FLAGS=cru +-test -z "$AS" && AS=as +-test -z "$CC" && CC=cc +-test -z "$LTCC" && LTCC=$CC +-test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS +-test -z "$DLLTOOL" && DLLTOOL=dlltool +-test -z "$LD" && LD=ld +-test -z "$LN_S" && LN_S="ln -s" +-test -z "$MAGIC_CMD" && MAGIC_CMD=file +-test -z "$NM" && NM=nm +-test -z "$SED" && SED=sed +-test -z "$OBJDUMP" && OBJDUMP=objdump +-test -z "$RANLIB" && RANLIB=: +-test -z "$STRIP" && STRIP=: +-test -z "$ac_objext" && ac_objext=o ++fi ++fi ++OTOOL=$ac_cv_prog_OTOOL ++if test -n "$OTOOL"; then ++ { echo "$as_me:$LINENO: result: $OTOOL" >&5 ++echo "${ECHO_T}$OTOOL" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi + +-# Determine commands to create old-style static archives. +-old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' +-old_postinstall_cmds='chmod 644 $oldlib' +-old_postuninstall_cmds= + +-if test -n "$RANLIB"; then +- case $host_os in +- openbsd*) +- old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib" +- ;; +- *) +- old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib" +- ;; +- esac +- old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" + fi +- +-for cc_temp in $compiler""; do +- case $cc_temp in +- compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; +- distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; +- \-*) ;; +- *) break;; +- esac ++if test -z "$ac_cv_prog_OTOOL"; then ++ ac_ct_OTOOL=$OTOOL ++ # Extract the first word of "otool", so it can be a program name with args. ++set dummy otool; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_ac_ct_OTOOL+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$ac_ct_OTOOL"; then ++ ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_ac_ct_OTOOL="otool" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi + done +-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` ++done ++IFS=$as_save_IFS + ++fi ++fi ++ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL ++if test -n "$ac_ct_OTOOL"; then ++ { echo "$as_me:$LINENO: result: $ac_ct_OTOOL" >&5 ++echo "${ECHO_T}$ac_ct_OTOOL" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi + +-# Only perform the check for file, if the check method requires it +-case $deplibs_check_method in +-file_magic*) +- if test "$file_magic_cmd" = '$MAGIC_CMD'; then +- { $as_echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5 +-$as_echo_n "checking for ${ac_tool_prefix}file... " >&6; } +-if test "${lt_cv_path_MAGIC_CMD+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ if test "x$ac_ct_OTOOL" = x; then ++ OTOOL=":" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&5 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&2;} ++ac_tool_warned=yes ;; ++esac ++ OTOOL=$ac_ct_OTOOL ++ fi + else +- case $MAGIC_CMD in +-[\\/*] | ?:[\\/]*) +- lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. +- ;; +-*) +- lt_save_MAGIC_CMD="$MAGIC_CMD" +- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR +- ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" +- for ac_dir in $ac_dummy; do +- IFS="$lt_save_ifs" +- test -z "$ac_dir" && ac_dir=. +- if test -f $ac_dir/${ac_tool_prefix}file; then +- lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file" +- if test -n "$file_magic_test_file"; then +- case $deplibs_check_method in +- "file_magic "*) +- file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` +- MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +- if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | +- $EGREP "$file_magic_regex" > /dev/null; then +- : +- else +- cat <&2 +- +-*** Warning: the command libtool uses to detect shared libraries, +-*** $file_magic_cmd, produces output that libtool cannot recognize. +-*** The result is that libtool may fail to recognize shared libraries +-*** as such. This will affect the creation of libtool libraries that +-*** depend on shared libraries, but programs linked with such libtool +-*** libraries will work regardless of this problem. Nevertheless, you +-*** may want to report the problem to your system manager and/or to +-*** bug-libtool@gnu.org +- +-EOF +- fi ;; +- esac +- fi +- break +- fi +- done +- IFS="$lt_save_ifs" +- MAGIC_CMD="$lt_save_MAGIC_CMD" +- ;; +-esac +-fi +- +-MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +-if test -n "$MAGIC_CMD"; then +- { $as_echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 +-$as_echo "$MAGIC_CMD" >&6; } +-else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } +-fi +- +-if test -z "$lt_cv_path_MAGIC_CMD"; then +- if test -n "$ac_tool_prefix"; then +- { $as_echo "$as_me:$LINENO: checking for file" >&5 +-$as_echo_n "checking for file... " >&6; } +-if test "${lt_cv_path_MAGIC_CMD+set}" = set; then +- $as_echo_n "(cached) " >&6 +-else +- case $MAGIC_CMD in +-[\\/*] | ?:[\\/]*) +- lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. +- ;; +-*) +- lt_save_MAGIC_CMD="$MAGIC_CMD" +- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR +- ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" +- for ac_dir in $ac_dummy; do +- IFS="$lt_save_ifs" +- test -z "$ac_dir" && ac_dir=. +- if test -f $ac_dir/file; then +- lt_cv_path_MAGIC_CMD="$ac_dir/file" +- if test -n "$file_magic_test_file"; then +- case $deplibs_check_method in +- "file_magic "*) +- file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` +- MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +- if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | +- $EGREP "$file_magic_regex" > /dev/null; then +- : +- else +- cat <&2 +- +-*** Warning: the command libtool uses to detect shared libraries, +-*** $file_magic_cmd, produces output that libtool cannot recognize. +-*** The result is that libtool may fail to recognize shared libraries +-*** as such. This will affect the creation of libtool libraries that +-*** depend on shared libraries, but programs linked with such libtool +-*** libraries will work regardless of this problem. Nevertheless, you +-*** may want to report the problem to your system manager and/or to +-*** bug-libtool@gnu.org +- +-EOF +- fi ;; +- esac +- fi +- break +- fi +- done +- IFS="$lt_save_ifs" +- MAGIC_CMD="$lt_save_MAGIC_CMD" +- ;; +-esac +-fi +- +-MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +-if test -n "$MAGIC_CMD"; then +- { $as_echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 +-$as_echo "$MAGIC_CMD" >&6; } +-else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } +-fi +- +- else +- MAGIC_CMD=: +- fi ++ OTOOL="$ac_cv_prog_OTOOL" + fi + +- fi +- ;; +-esac +- +- +- case $host_os in +- rhapsody* | darwin*) + if test -n "$ac_tool_prefix"; then +- # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args. +-set dummy ${ac_tool_prefix}dsymutil; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } +-if test "${ac_cv_prog_DSYMUTIL+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args. ++set dummy ${ac_tool_prefix}otool64; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_OTOOL64+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- if test -n "$DSYMUTIL"; then +- ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test. ++ if test -n "$OTOOL64"; then ++ ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test. + else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + for as_dir in $PATH +@@ -8960,8 +8070,8 @@ + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then +- ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +@@ -8970,28 +8080,28 @@ + + fi + fi +-DSYMUTIL=$ac_cv_prog_DSYMUTIL +-if test -n "$DSYMUTIL"; then +- { $as_echo "$as_me:$LINENO: result: $DSYMUTIL" >&5 +-$as_echo "$DSYMUTIL" >&6; } ++OTOOL64=$ac_cv_prog_OTOOL64 ++if test -n "$OTOOL64"; then ++ { echo "$as_me:$LINENO: result: $OTOOL64" >&5 ++echo "${ECHO_T}$OTOOL64" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + + + fi +-if test -z "$ac_cv_prog_DSYMUTIL"; then +- ac_ct_DSYMUTIL=$DSYMUTIL +- # Extract the first word of "dsymutil", so it can be a program name with args. +-set dummy dsymutil; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } +-if test "${ac_cv_prog_ac_ct_DSYMUTIL+set}" = set; then +- $as_echo_n "(cached) " >&6 ++if test -z "$ac_cv_prog_OTOOL64"; then ++ ac_ct_OTOOL64=$OTOOL64 ++ # Extract the first word of "otool64", so it can be a program name with args. ++set dummy otool64; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_ac_ct_OTOOL64+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- if test -n "$ac_ct_DSYMUTIL"; then +- ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test. ++ if test -n "$ac_ct_OTOOL64"; then ++ ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test. + else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + for as_dir in $PATH +@@ -9000,8 +8110,8 @@ + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then +- ac_cv_prog_ac_ct_DSYMUTIL="dsymutil" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ ac_cv_prog_ac_ct_OTOOL64="otool64" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done +@@ -9010,158 +8120,93 @@ + + fi + fi +-ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL +-if test -n "$ac_ct_DSYMUTIL"; then +- { $as_echo "$as_me:$LINENO: result: $ac_ct_DSYMUTIL" >&5 +-$as_echo "$ac_ct_DSYMUTIL" >&6; } ++ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64 ++if test -n "$ac_ct_OTOOL64"; then ++ { echo "$as_me:$LINENO: result: $ac_ct_OTOOL64" >&5 ++echo "${ECHO_T}$ac_ct_OTOOL64" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + +- if test "x$ac_ct_DSYMUTIL" = x; then +- DSYMUTIL=":" ++ if test "x$ac_ct_OTOOL64" = x; then ++ OTOOL64=":" + else + case $cross_compiling:$ac_tool_warned in + yes:) +-{ $as_echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools + whose name does not start with the host triplet. If you think this + configuration is useful to you, please write to autoconf@gnu.org." >&5 +-$as_echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools + whose name does not start with the host triplet. If you think this + configuration is useful to you, please write to autoconf@gnu.org." >&2;} + ac_tool_warned=yes ;; + esac +- DSYMUTIL=$ac_ct_DSYMUTIL ++ OTOOL64=$ac_ct_OTOOL64 + fi + else +- DSYMUTIL="$ac_cv_prog_DSYMUTIL" ++ OTOOL64="$ac_cv_prog_OTOOL64" + fi + +- if test -n "$ac_tool_prefix"; then +- # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args. +-set dummy ${ac_tool_prefix}nmedit; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } +-if test "${ac_cv_prog_NMEDIT+set}" = set; then +- $as_echo_n "(cached) " >&6 +-else +- if test -n "$NMEDIT"; then +- ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test. +-else +-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +-for as_dir in $PATH +-do +- IFS=$as_save_IFS +- test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do +- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then +- ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 +- break 2 +- fi +-done +-done +-IFS=$as_save_IFS + +-fi +-fi +-NMEDIT=$ac_cv_prog_NMEDIT +-if test -n "$NMEDIT"; then +- { $as_echo "$as_me:$LINENO: result: $NMEDIT" >&5 +-$as_echo "$NMEDIT" >&6; } +-else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } +-fi + + +-fi +-if test -z "$ac_cv_prog_NMEDIT"; then +- ac_ct_NMEDIT=$NMEDIT +- # Extract the first word of "nmedit", so it can be a program name with args. +-set dummy nmedit; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } +-if test "${ac_cv_prog_ac_ct_NMEDIT+set}" = set; then +- $as_echo_n "(cached) " >&6 +-else +- if test -n "$ac_ct_NMEDIT"; then +- ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test. +-else +-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +-for as_dir in $PATH +-do +- IFS=$as_save_IFS +- test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do +- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then +- ac_cv_prog_ac_ct_NMEDIT="nmedit" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 +- break 2 +- fi +-done +-done +-IFS=$as_save_IFS + +-fi +-fi +-ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT +-if test -n "$ac_ct_NMEDIT"; then +- { $as_echo "$as_me:$LINENO: result: $ac_ct_NMEDIT" >&5 +-$as_echo "$ac_ct_NMEDIT" >&6; } +-else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } +-fi + +- if test "x$ac_ct_NMEDIT" = x; then +- NMEDIT=":" +- else +- case $cross_compiling:$ac_tool_warned in +-yes:) +-{ $as_echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools +-whose name does not start with the host triplet. If you think this +-configuration is useful to you, please write to autoconf@gnu.org." >&5 +-$as_echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools +-whose name does not start with the host triplet. If you think this +-configuration is useful to you, please write to autoconf@gnu.org." >&2;} +-ac_tool_warned=yes ;; +-esac +- NMEDIT=$ac_ct_NMEDIT +- fi +-else +- NMEDIT="$ac_cv_prog_NMEDIT" +-fi + + +- { $as_echo "$as_me:$LINENO: checking for -single_module linker flag" >&5 +-$as_echo_n "checking for -single_module linker flag... " >&6; } ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ { echo "$as_me:$LINENO: checking for -single_module linker flag" >&5 ++echo $ECHO_N "checking for -single_module linker flag... $ECHO_C" >&6; } + if test "${lt_cv_apple_cc_single_mod+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + lt_cv_apple_cc_single_mod=no + if test -z "${LT_MULTI_MODULE}"; then +- # By default we will add the -single_module flag. You can override +- # by either setting the environment variable LT_MULTI_MODULE +- # non-empty at configure time, or by adding -multi_module to the +- # link flags. +- echo "int foo(void){return 1;}" > conftest.c +- $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ +- -dynamiclib ${wl}-single_module conftest.c +- if test -f libconftest.dylib; then +- lt_cv_apple_cc_single_mod=yes +- rm -rf libconftest.dylib* +- fi +- rm conftest.c ++ # By default we will add the -single_module flag. You can override ++ # by either setting the environment variable LT_MULTI_MODULE ++ # non-empty at configure time, or by adding -multi_module to the ++ # link flags. ++ rm -rf libconftest.dylib* ++ echo "int foo(void){return 1;}" > conftest.c ++ echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ ++-dynamiclib -Wl,-single_module conftest.c" >&5 ++ $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ ++ -dynamiclib -Wl,-single_module conftest.c 2>conftest.err ++ _lt_result=$? ++ if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then ++ lt_cv_apple_cc_single_mod=yes ++ else ++ cat conftest.err >&5 ++ fi ++ rm -rf libconftest.dylib* ++ rm -f conftest.* + fi + fi +-{ $as_echo "$as_me:$LINENO: result: $lt_cv_apple_cc_single_mod" >&5 +-$as_echo "$lt_cv_apple_cc_single_mod" >&6; } +- { $as_echo "$as_me:$LINENO: checking for -exported_symbols_list linker flag" >&5 +-$as_echo_n "checking for -exported_symbols_list linker flag... " >&6; } ++{ echo "$as_me:$LINENO: result: $lt_cv_apple_cc_single_mod" >&5 ++echo "${ECHO_T}$lt_cv_apple_cc_single_mod" >&6; } ++ { echo "$as_me:$LINENO: checking for -exported_symbols_list linker flag" >&5 ++echo $ECHO_N "checking for -exported_symbols_list linker flag... $ECHO_C" >&6; } + if test "${lt_cv_ld_exported_symbols_list+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + lt_cv_ld_exported_symbols_list=no + save_LDFLAGS=$LDFLAGS +@@ -9188,53 +8233,49 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + lt_cv_ld_exported_symbols_list=yes + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + + lt_cv_ld_exported_symbols_list=no + fi + +-rm -rf conftest.dSYM + rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +- LDFLAGS="$save_LDFLAGS" ++ LDFLAGS="$save_LDFLAGS" + + fi +-{ $as_echo "$as_me:$LINENO: result: $lt_cv_ld_exported_symbols_list" >&5 +-$as_echo "$lt_cv_ld_exported_symbols_list" >&6; } ++{ echo "$as_me:$LINENO: result: $lt_cv_ld_exported_symbols_list" >&5 ++echo "${ECHO_T}$lt_cv_ld_exported_symbols_list" >&6; } + case $host_os in +- rhapsody* | darwin1.[0123]) ++ rhapsody* | darwin1.[012]) + _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; + darwin1.*) +- _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; +- darwin*) ++ _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; ++ darwin*) # darwin 5.x on + # if running on 10.5 or later, the deployment target defaults + # to the OS version, if on x86, and 10.4, the deployment + # target defaults to 10.4. Don't you love it? + case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in +- 10.0,*86*-darwin8*|10.0,*-darwin[91]*) +- _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; +- 10.[012]*) +- _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; +- 10.*) +- _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; ++ 10.0,*86*-darwin8*|10.0,*-darwin[91]*) ++ _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; ++ 10.[012]*) ++ _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; ++ 10.*) ++ _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; + esac + ;; + esac +@@ -9244,5672 +8285,2538 @@ + if test "$lt_cv_ld_exported_symbols_list" = "yes"; then + _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym' + else +- _lt_dar_export_syms="~$NMEDIT -s \$output_objdir/\${libname}-symbols.expsym \${lib}" ++ _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}' + fi + if test "$DSYMUTIL" != ":"; then +- _lt_dsymutil="~$DSYMUTIL \$lib || :" ++ _lt_dsymutil='~$DSYMUTIL $lib || :' + else + _lt_dsymutil= + fi + ;; + esac + ++# On IRIX 5.3, sys/types and inttypes.h are conflicting. + +-enable_dlopen=no +-enable_win32_dll=no + +-# Check whether --enable-libtool-lock was given. +-if test "${enable_libtool_lock+set}" = set; then +- enableval=$enable_libtool_lock; +-fi + +-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes + + +-# Check whether --with-pic was given. +-if test "${with_pic+set}" = set; then +- withval=$with_pic; pic_mode="$withval" +-else +- pic_mode=default +-fi + +-test -z "$pic_mode" && pic_mode=default + +-# Use C for the default configuration in the libtool script +-tagname= +-lt_save_CC="$CC" +-ac_ext=c +-ac_cpp='$CPP $CPPFLAGS' +-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +-ac_compiler_gnu=$ac_cv_c_compiler_gnu + + +-# Source file extension for C test sources. +-ac_ext=c ++for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ ++ inttypes.h stdint.h unistd.h ++do ++as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` ++{ echo "$as_me:$LINENO: checking for $ac_header" >&5 ++echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } ++if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++$ac_includes_default + +-# Object file extension for compiled C test sources. +-objext=o +-objext=$objext ++#include <$ac_header> ++_ACEOF ++rm -f conftest.$ac_objext ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then ++ eval "$as_ac_Header=yes" ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 + +-# Code to be used in simple compile tests +-lt_simple_compile_test_code="int some_variable = 0;" ++ eval "$as_ac_Header=no" ++fi + +-# Code to be used in simple link tests +-lt_simple_link_test_code='int main(){return(0);}' ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++fi ++ac_res=`eval echo '${'$as_ac_Header'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } ++if test `eval echo '${'$as_ac_Header'}'` = yes; then ++ cat >>confdefs.h <<_ACEOF ++#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 ++_ACEOF + ++fi + +-# If no C compiler was specified, use CC. +-LTCC=${LTCC-"$CC"} ++done + +-# If no C compiler flags were specified, use CFLAGS. +-LTCFLAGS=${LTCFLAGS-"$CFLAGS"} + +-# Allow CC to be a program name with arguments. +-compiler=$CC + ++for ac_header in dlfcn.h ++do ++as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` ++{ echo "$as_me:$LINENO: checking for $ac_header" >&5 ++echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } ++if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++$ac_includes_default + +-# save warnings/boilerplate of simple test code +-ac_outfile=conftest.$ac_objext +-echo "$lt_simple_compile_test_code" >conftest.$ac_ext +-eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +-_lt_compiler_boilerplate=`cat conftest.err` +-$rm conftest* ++#include <$ac_header> ++_ACEOF ++rm -f conftest.$ac_objext ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then ++ eval "$as_ac_Header=yes" ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_outfile=conftest.$ac_objext +-echo "$lt_simple_link_test_code" >conftest.$ac_ext +-eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +-_lt_linker_boilerplate=`cat conftest.err` +-$rm -r conftest* ++ eval "$as_ac_Header=no" ++fi + ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++fi ++ac_res=`eval echo '${'$as_ac_Header'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } ++if test `eval echo '${'$as_ac_Header'}'` = yes; then ++ cat >>confdefs.h <<_ACEOF ++#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 ++_ACEOF + ++fi + +-lt_prog_compiler_no_builtin_flag= ++done + +-if test "$GCC" = yes; then +- lt_prog_compiler_no_builtin_flag=' -fno-builtin' + + +-{ $as_echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 +-$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; } +-if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then +- $as_echo_n "(cached) " >&6 +-else +- lt_cv_prog_compiler_rtti_exceptions=no +- ac_outfile=conftest.$ac_objext +- echo "$lt_simple_compile_test_code" > conftest.$ac_ext +- lt_compiler_flag="-fno-rtti -fno-exceptions" +- # Insert the option either (1) after the last *FLAGS variable, or +- # (2) before a word containing "conftest.", or (3) at the end. +- # Note that $ac_compile itself does not contain backslashes and begins +- # with a dollar sign (not a hyphen), so the echo should work correctly. +- # The option is referenced via a variable to avoid confusing sed. +- lt_compile=`echo "$ac_compile" | $SED \ +- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ +- -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ +- -e 's:$: $lt_compiler_flag:'` +- (eval echo "\"\$as_me:9351: $lt_compile\"" >&5) +- (eval "$lt_compile" 2>conftest.err) +- ac_status=$? +- cat conftest.err >&5 +- echo "$as_me:9355: \$? = $ac_status" >&5 +- if (exit $ac_status) && test -s "$ac_outfile"; then +- # The compiler can only warn and ignore the option if not recognized +- # So say no if there are warnings other than the usual output. +- $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp +- $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 +- if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then +- lt_cv_prog_compiler_rtti_exceptions=yes +- fi +- fi +- $rm conftest* ++# Set options + +-fi +-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 +-$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; } + +-if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then +- lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions" +-else +- : +-fi + +-fi ++ enable_dlopen=no + +-lt_prog_compiler_wl= +-lt_prog_compiler_pic= +-lt_prog_compiler_static= + +-{ $as_echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 +-$as_echo_n "checking for $compiler option to produce PIC... " >&6; } ++ enable_win32_dll=no + +- if test "$GCC" = yes; then +- lt_prog_compiler_wl='-Wl,' +- lt_prog_compiler_static='-static' + +- case $host_os in +- aix*) +- # All AIX code is PIC. +- if test "$host_cpu" = ia64; then +- # AIX 5 now supports IA64 processor +- lt_prog_compiler_static='-Bstatic' +- fi ++ # Check whether --enable-shared was given. ++if test "${enable_shared+set}" = set; then ++ enableval=$enable_shared; p=${PACKAGE-default} ++ case $enableval in ++ yes) enable_shared=yes ;; ++ no) enable_shared=no ;; ++ *) ++ enable_shared=no ++ # Look at the argument we got. We use all the common list separators. ++ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," ++ for pkg in $enableval; do ++ IFS="$lt_save_ifs" ++ if test "X$pkg" = "X$p"; then ++ enable_shared=yes ++ fi ++ done ++ IFS="$lt_save_ifs" + ;; ++ esac ++else ++ enable_shared=yes ++fi + +- amigaos*) +- # FIXME: we need at least 68020 code to build shared libraries, but +- # adding the `-m68020' flag to GCC prevents building anything better, +- # like `-m68040'. +- lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4' +- ;; + +- beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) +- # PIC is the default for these OSes. +- ;; + +- mingw* | cygwin* | pw32* | os2*) +- # This hack is so that the source file can tell whether it is being +- # built for inclusion in a dll (and should export symbols for example). +- # Although the cygwin gcc ignores -fPIC, still need this for old-style +- # (--disable-auto-import) libraries +- lt_prog_compiler_pic='-DDLL_EXPORT' +- ;; + +- darwin* | rhapsody*) +- # PIC is the default on this platform +- # Common symbols not allowed in MH_DYLIB files +- lt_prog_compiler_pic='-fno-common' +- ;; + +- interix[3-9]*) +- # Interix 3.x gcc -fpic/-fPIC options generate broken code. +- # Instead, we relocate shared libraries at runtime. +- ;; + +- msdosdjgpp*) +- # Just because we use GCC doesn't mean we suddenly get shared libraries +- # on systems that don't support them. +- lt_prog_compiler_can_build_shared=no +- enable_shared=no +- ;; + +- sysv4*MP*) +- if test -d /usr/nec; then +- lt_prog_compiler_pic=-Kconform_pic +- fi +- ;; + +- hpux*) +- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but +- # not for PA HP-UX. +- case $host_cpu in +- hppa*64*|ia64*) +- # +Z the default +- ;; +- *) +- lt_prog_compiler_pic='-fPIC' +- ;; +- esac +- ;; + ++ # Check whether --enable-static was given. ++if test "${enable_static+set}" = set; then ++ enableval=$enable_static; p=${PACKAGE-default} ++ case $enableval in ++ yes) enable_static=yes ;; ++ no) enable_static=no ;; + *) +- lt_prog_compiler_pic='-fPIC' ++ enable_static=no ++ # Look at the argument we got. We use all the common list separators. ++ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," ++ for pkg in $enableval; do ++ IFS="$lt_save_ifs" ++ if test "X$pkg" = "X$p"; then ++ enable_static=yes ++ fi ++ done ++ IFS="$lt_save_ifs" + ;; + esac +- else +- # PORTME Check for flag to pass linker flags through the system compiler. +- case $host_os in +- aix*) +- lt_prog_compiler_wl='-Wl,' +- if test "$host_cpu" = ia64; then +- # AIX 5 now supports IA64 processor +- lt_prog_compiler_static='-Bstatic' +- else +- lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp' +- fi +- ;; +- darwin*) +- # PIC is the default on this platform +- # Common symbols not allowed in MH_DYLIB files +- case $cc_basename in +- xlc*) +- lt_prog_compiler_pic='-qnocommon' +- lt_prog_compiler_wl='-Wl,' +- ;; +- esac +- ;; ++else ++ enable_static=yes ++fi + +- mingw* | cygwin* | pw32* | os2*) +- # This hack is so that the source file can tell whether it is being +- # built for inclusion in a dll (and should export symbols for example). +- lt_prog_compiler_pic='-DDLL_EXPORT' +- ;; + +- hpux9* | hpux10* | hpux11*) +- lt_prog_compiler_wl='-Wl,' +- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but +- # not for PA HP-UX. +- case $host_cpu in +- hppa*64*|ia64*) +- # +Z the default +- ;; +- *) +- lt_prog_compiler_pic='+Z' +- ;; +- esac +- # Is there a better lt_prog_compiler_static that works with the bundled CC? +- lt_prog_compiler_static='${wl}-a ${wl}archive' +- ;; + +- irix5* | irix6* | nonstopux*) +- lt_prog_compiler_wl='-Wl,' +- # PIC (with -KPIC) is the default. +- lt_prog_compiler_static='-non_shared' +- ;; + +- newsos6) +- lt_prog_compiler_pic='-KPIC' +- lt_prog_compiler_static='-Bstatic' +- ;; + +- linux* | k*bsd*-gnu) +- case $cc_basename in +- icc* | ecc*) +- lt_prog_compiler_wl='-Wl,' +- lt_prog_compiler_pic='-KPIC' +- lt_prog_compiler_static='-static' +- ;; +- pgcc* | pgf77* | pgf90* | pgf95*) +- # Portland Group compilers (*not* the Pentium gcc compiler, +- # which looks to be a dead project) +- lt_prog_compiler_wl='-Wl,' +- lt_prog_compiler_pic='-fpic' +- lt_prog_compiler_static='-Bstatic' +- ;; +- ccc*) +- lt_prog_compiler_wl='-Wl,' +- # All Alpha code is PIC. +- lt_prog_compiler_static='-non_shared' +- ;; +- *) +- case `$CC -V 2>&1 | sed 5q` in +- *Sun\ C*) +- # Sun C 5.9 +- lt_prog_compiler_pic='-KPIC' +- lt_prog_compiler_static='-Bstatic' +- lt_prog_compiler_wl='-Wl,' +- ;; +- *Sun\ F*) +- # Sun Fortran 8.3 passes all unrecognized flags to the linker +- lt_prog_compiler_pic='-KPIC' +- lt_prog_compiler_static='-Bstatic' +- lt_prog_compiler_wl='' +- ;; +- esac +- ;; +- esac +- ;; + +- osf3* | osf4* | osf5*) +- lt_prog_compiler_wl='-Wl,' +- # All OSF/1 code is PIC. +- lt_prog_compiler_static='-non_shared' +- ;; + +- rdos*) +- lt_prog_compiler_static='-non_shared' +- ;; + +- solaris*) +- lt_prog_compiler_pic='-KPIC' +- lt_prog_compiler_static='-Bstatic' +- case $cc_basename in +- f77* | f90* | f95*) +- lt_prog_compiler_wl='-Qoption ld ';; +- *) +- lt_prog_compiler_wl='-Wl,';; +- esac +- ;; + +- sunos4*) +- lt_prog_compiler_wl='-Qoption ld ' +- lt_prog_compiler_pic='-PIC' +- lt_prog_compiler_static='-Bstatic' +- ;; + +- sysv4 | sysv4.2uw2* | sysv4.3*) +- lt_prog_compiler_wl='-Wl,' +- lt_prog_compiler_pic='-KPIC' +- lt_prog_compiler_static='-Bstatic' +- ;; ++# Check whether --with-pic was given. ++if test "${with_pic+set}" = set; then ++ withval=$with_pic; pic_mode="$withval" ++else ++ pic_mode=default ++fi ++ ++ ++test -z "$pic_mode" && pic_mode=default ++ + +- sysv4*MP*) +- if test -d /usr/nec ;then +- lt_prog_compiler_pic='-Kconform_pic' +- lt_prog_compiler_static='-Bstatic' +- fi +- ;; + +- sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) +- lt_prog_compiler_wl='-Wl,' +- lt_prog_compiler_pic='-KPIC' +- lt_prog_compiler_static='-Bstatic' +- ;; + +- unicos*) +- lt_prog_compiler_wl='-Wl,' +- lt_prog_compiler_can_build_shared=no +- ;; + +- uts4*) +- lt_prog_compiler_pic='-pic' +- lt_prog_compiler_static='-Bstatic' +- ;; + ++ ++ # Check whether --enable-fast-install was given. ++if test "${enable_fast_install+set}" = set; then ++ enableval=$enable_fast_install; p=${PACKAGE-default} ++ case $enableval in ++ yes) enable_fast_install=yes ;; ++ no) enable_fast_install=no ;; + *) +- lt_prog_compiler_can_build_shared=no ++ enable_fast_install=no ++ # Look at the argument we got. We use all the common list separators. ++ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," ++ for pkg in $enableval; do ++ IFS="$lt_save_ifs" ++ if test "X$pkg" = "X$p"; then ++ enable_fast_install=yes ++ fi ++ done ++ IFS="$lt_save_ifs" + ;; + esac +- fi ++else ++ enable_fast_install=yes ++fi + +-{ $as_echo "$as_me:$LINENO: result: $lt_prog_compiler_pic" >&5 +-$as_echo "$lt_prog_compiler_pic" >&6; } + +-# +-# Check to make sure the PIC flag actually works. +-# +-if test -n "$lt_prog_compiler_pic"; then + +-{ $as_echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 +-$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; } +-if test "${lt_cv_prog_compiler_pic_works+set}" = set; then +- $as_echo_n "(cached) " >&6 +-else +- lt_cv_prog_compiler_pic_works=no +- ac_outfile=conftest.$ac_objext +- echo "$lt_simple_compile_test_code" > conftest.$ac_ext +- lt_compiler_flag="$lt_prog_compiler_pic -DPIC" +- # Insert the option either (1) after the last *FLAGS variable, or +- # (2) before a word containing "conftest.", or (3) at the end. +- # Note that $ac_compile itself does not contain backslashes and begins +- # with a dollar sign (not a hyphen), so the echo should work correctly. +- # The option is referenced via a variable to avoid confusing sed. +- lt_compile=`echo "$ac_compile" | $SED \ +- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ +- -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ +- -e 's:$: $lt_compiler_flag:'` +- (eval echo "\"\$as_me:9641: $lt_compile\"" >&5) +- (eval "$lt_compile" 2>conftest.err) +- ac_status=$? +- cat conftest.err >&5 +- echo "$as_me:9645: \$? = $ac_status" >&5 +- if (exit $ac_status) && test -s "$ac_outfile"; then +- # The compiler can only warn and ignore the option if not recognized +- # So say no if there are warnings other than the usual output. +- $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp +- $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 +- if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then +- lt_cv_prog_compiler_pic_works=yes +- fi +- fi +- $rm conftest* + +-fi +-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works" >&5 +-$as_echo "$lt_cv_prog_compiler_pic_works" >&6; } + +-if test x"$lt_cv_prog_compiler_pic_works" = xyes; then +- case $lt_prog_compiler_pic in +- "" | " "*) ;; +- *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;; +- esac +-else +- lt_prog_compiler_pic= +- lt_prog_compiler_can_build_shared=no +-fi + +-fi +-case $host_os in +- # For platforms which do not support PIC, -DPIC is meaningless: +- *djgpp*) +- lt_prog_compiler_pic= +- ;; +- *) +- lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC" +- ;; +-esac + +-# +-# Check to make sure the static flag actually works. +-# +-wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\" +-{ $as_echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 +-$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; } +-if test "${lt_cv_prog_compiler_static_works+set}" = set; then +- $as_echo_n "(cached) " >&6 +-else +- lt_cv_prog_compiler_static_works=no +- save_LDFLAGS="$LDFLAGS" +- LDFLAGS="$LDFLAGS $lt_tmp_static_flag" +- echo "$lt_simple_link_test_code" > conftest.$ac_ext +- if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then +- # The linker can only warn and ignore the option if not recognized +- # So say no if there are warnings +- if test -s conftest.err; then +- # Append any errors to the config.log. +- cat conftest.err 1>&5 +- $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp +- $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 +- if diff conftest.exp conftest.er2 >/dev/null; then +- lt_cv_prog_compiler_static_works=yes +- fi +- else +- lt_cv_prog_compiler_static_works=yes +- fi +- fi +- $rm -r conftest* +- LDFLAGS="$save_LDFLAGS" + +-fi +-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works" >&5 +-$as_echo "$lt_cv_prog_compiler_static_works" >&6; } + +-if test x"$lt_cv_prog_compiler_static_works" = xyes; then +- : +-else +- lt_prog_compiler_static= +-fi + + +-{ $as_echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 +-$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } +-if test "${lt_cv_prog_compiler_c_o+set}" = set; then +- $as_echo_n "(cached) " >&6 +-else +- lt_cv_prog_compiler_c_o=no +- $rm -r conftest 2>/dev/null +- mkdir conftest +- cd conftest +- mkdir out +- echo "$lt_simple_compile_test_code" > conftest.$ac_ext ++# This can be used to rebuild libtool when needed ++LIBTOOL_DEPS="$ltmain" + +- lt_compiler_flag="-o out/conftest2.$ac_objext" +- # Insert the option either (1) after the last *FLAGS variable, or +- # (2) before a word containing "conftest.", or (3) at the end. +- # Note that $ac_compile itself does not contain backslashes and begins +- # with a dollar sign (not a hyphen), so the echo should work correctly. +- lt_compile=`echo "$ac_compile" | $SED \ +- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ +- -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ +- -e 's:$: $lt_compiler_flag:'` +- (eval echo "\"\$as_me:9745: $lt_compile\"" >&5) +- (eval "$lt_compile" 2>out/conftest.err) +- ac_status=$? +- cat out/conftest.err >&5 +- echo "$as_me:9749: \$? = $ac_status" >&5 +- if (exit $ac_status) && test -s out/conftest2.$ac_objext +- then +- # The compiler can only warn and ignore the option if not recognized +- # So say no if there are warnings +- $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp +- $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 +- if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then +- lt_cv_prog_compiler_c_o=yes +- fi +- fi +- chmod u+w . 2>&5 +- $rm conftest* +- # SGI C++ compiler will create directory out/ii_files/ for +- # template instantiation +- test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files +- $rm out/* && rmdir out +- cd .. +- rmdir conftest +- $rm conftest* ++# Always use our own libtool. ++LIBTOOL='$(SHELL) $(top_builddir)/libtool' + +-fi +-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5 +-$as_echo "$lt_cv_prog_compiler_c_o" >&6; } + + +-hard_links="nottested" +-if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then +- # do not overwrite the value of need_locks provided by the user +- { $as_echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 +-$as_echo_n "checking if we can lock with hard links... " >&6; } +- hard_links=yes +- $rm conftest* +- ln conftest.a conftest.b 2>/dev/null && hard_links=no +- touch conftest.a +- ln conftest.a conftest.b 2>&5 || hard_links=no +- ln conftest.a conftest.b 2>/dev/null && hard_links=no +- { $as_echo "$as_me:$LINENO: result: $hard_links" >&5 +-$as_echo "$hard_links" >&6; } +- if test "$hard_links" = no; then +- { $as_echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 +-$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} +- need_locks=warn +- fi +-else +- need_locks=no +-fi + +-{ $as_echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 +-$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } + +- runpath_var= +- allow_undefined_flag= +- enable_shared_with_static_runtimes=no +- archive_cmds= +- archive_expsym_cmds= +- old_archive_From_new_cmds= +- old_archive_from_expsyms_cmds= +- export_dynamic_flag_spec= +- whole_archive_flag_spec= +- thread_safe_flag_spec= +- hardcode_libdir_flag_spec= +- hardcode_libdir_flag_spec_ld= +- hardcode_libdir_separator= +- hardcode_direct=no +- hardcode_minus_L=no +- hardcode_shlibpath_var=unsupported +- link_all_deplibs=unknown +- hardcode_automatic=no +- module_cmds= +- module_expsym_cmds= +- always_export_symbols=no +- export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' +- # include_expsyms should be a list of space-separated symbols to be *always* +- # included in the symbol list +- include_expsyms= +- # exclude_expsyms can be an extended regexp of symbols to exclude +- # it will be wrapped by ` (' and `)$', so one must not match beginning or +- # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', +- # as well as any symbol that contains `d'. +- exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' +- # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out +- # platforms (ab)use it in PIC code, but their linkers get confused if +- # the symbol is explicitly referenced. Since portable code cannot +- # rely on this symbol name, it's probably fine to never include it in +- # preloaded symbol tables. +- # Exclude shared library initialization/finalization symbols. +- extract_expsyms_cmds= +- # Just being paranoid about ensuring that cc_basename is set. +- for cc_temp in $compiler""; do +- case $cc_temp in +- compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; +- distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; +- \-*) ;; +- *) break;; +- esac +-done +-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` + +- case $host_os in +- cygwin* | mingw* | pw32*) +- # FIXME: the MSVC++ port hasn't been tested in a loooong time +- # When not using gcc, we currently assume that we are using +- # Microsoft Visual C++. +- if test "$GCC" != yes; then +- with_gnu_ld=no +- fi +- ;; +- interix*) +- # we just hope/assume this is gcc and not c89 (= MSVC++) +- with_gnu_ld=yes +- ;; +- openbsd*) +- with_gnu_ld=no +- ;; +- esac + +- ld_shlibs=yes +- if test "$with_gnu_ld" = yes; then +- # If archive_cmds runs LD, not CC, wlarc should be empty +- wlarc='${wl}' + +- # Set some defaults for GNU ld with shared library support. These +- # are reset later if shared libraries are not supported. Putting them +- # here allows them to be overridden if necessary. +- runpath_var=LD_RUN_PATH +- hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir' +- export_dynamic_flag_spec='${wl}--export-dynamic' +- # ancient GNU ld didn't support --whole-archive et. al. +- if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then +- whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' +- else +- whole_archive_flag_spec= +- fi +- supports_anon_versioning=no +- case `$LD -v 2>/dev/null` in +- *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 +- *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... +- *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... +- *\ 2.11.*) ;; # other 2.11 versions +- *) supports_anon_versioning=yes ;; +- esac + +- # See if GNU ld supports shared libraries. +- case $host_os in +- aix[3-9]*) +- # On AIX/PPC, the GNU linker is very broken +- if test "$host_cpu" != ia64; then +- ld_shlibs=no +- cat <&2 + +-*** Warning: the GNU linker, at least up to release 2.9.1, is reported +-*** to be unable to reliably create shared libraries on AIX. +-*** Therefore, libtool is disabling shared libraries support. If you +-*** really care for shared libraries, you may want to modify your PATH +-*** so that a non-GNU linker is found, and then restart. + +-EOF +- fi +- ;; + +- amigaos*) +- archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' +- hardcode_libdir_flag_spec='-L$libdir' +- hardcode_minus_L=yes + +- # Samuel A. Falvo II reports +- # that the semantics of dynamic libraries on AmigaOS, at least up +- # to version 4, is to share data among multiple programs linked +- # with the same dynamic library. Since this doesn't match the +- # behavior of shared libraries on other platforms, we can't use +- # them. +- ld_shlibs=no +- ;; + +- beos*) +- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then +- allow_undefined_flag=unsupported +- # Joseph Beckenbach says some releases of gcc +- # support --undefined. This deserves some investigation. FIXME +- archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- else +- ld_shlibs=no +- fi +- ;; + +- cygwin* | mingw* | pw32*) +- # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless, +- # as there is no search path for DLLs. +- hardcode_libdir_flag_spec='-L$libdir' +- allow_undefined_flag=unsupported +- always_export_symbols=no +- enable_shared_with_static_runtimes=yes +- export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' + +- if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then +- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' +- # If the export-symbols file already is a .def file (1st line +- # is EXPORTS), use it as is; otherwise, prepend... +- archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then +- cp $export_symbols $output_objdir/$soname.def; +- else +- echo EXPORTS > $output_objdir/$soname.def; +- cat $export_symbols >> $output_objdir/$soname.def; +- fi~ +- $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' +- else +- ld_shlibs=no +- fi +- ;; + +- interix[3-9]*) +- hardcode_direct=no +- hardcode_shlibpath_var=no +- hardcode_libdir_flag_spec='${wl}-rpath,$libdir' +- export_dynamic_flag_spec='${wl}-E' +- # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. +- # Instead, shared libraries are loaded at an image base (0x10000000 by +- # default) and relocated if they conflict, which is a slow very memory +- # consuming and fragmenting process. To avoid this, we pick a random, +- # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link +- # time. Moving up from 0x10000000 also allows more sbrk(2) space. +- archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' +- archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' +- ;; + +- gnu* | linux* | k*bsd*-gnu) +- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then +- tmp_addflag= +- case $cc_basename,$host_cpu in +- pgcc*) # Portland Group C compiler +- whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' +- tmp_addflag=' $pic_flag' +- ;; +- pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers +- whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' +- tmp_addflag=' $pic_flag -Mnomain' ;; +- ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 +- tmp_addflag=' -i_dynamic' ;; +- efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 +- tmp_addflag=' -i_dynamic -nofor_main' ;; +- ifc* | ifort*) # Intel Fortran compiler +- tmp_addflag=' -nofor_main' ;; +- esac +- case `$CC -V 2>&1 | sed 5q` in +- *Sun\ C*) # Sun C 5.9 +- whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' +- tmp_sharedflag='-G' ;; +- *Sun\ F*) # Sun Fortran 8.3 +- tmp_sharedflag='-G' ;; +- *) +- tmp_sharedflag='-shared' ;; +- esac +- archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + +- if test $supports_anon_versioning = yes; then +- archive_expsym_cmds='$echo "{ global:" > $output_objdir/$libname.ver~ +- cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ +- $echo "local: *; };" >> $output_objdir/$libname.ver~ +- $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' +- fi +- else +- ld_shlibs=no +- fi +- ;; + +- netbsd*) +- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then +- archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' +- wlarc= +- else +- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' +- fi +- ;; + +- solaris*) +- if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then +- ld_shlibs=no +- cat <&2 + +-*** Warning: The releases 2.8.* of the GNU linker cannot reliably +-*** create shared libraries on Solaris systems. Therefore, libtool +-*** is disabling shared libraries support. We urge you to upgrade GNU +-*** binutils to release 2.9.1 or newer. Another option is to modify +-*** your PATH or compiler configuration so that the native linker is +-*** used, and then restart. + +-EOF +- elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then +- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' +- else +- ld_shlibs=no +- fi +- ;; + +- sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) +- case `$LD -v 2>&1` in +- *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) +- ld_shlibs=no +- cat <<_LT_EOF 1>&2 + +-*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not +-*** reliably create shared libraries on SCO systems. Therefore, libtool +-*** is disabling shared libraries support. We urge you to upgrade GNU +-*** binutils to release 2.16.91.0.3 or newer. Another option is to modify +-*** your PATH or compiler configuration so that the native linker is +-*** used, and then restart. ++test -z "$LN_S" && LN_S="ln -s" + +-_LT_EOF +- ;; +- *) +- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then +- hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`' +- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib' +- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib' +- else +- ld_shlibs=no +- fi +- ;; +- esac +- ;; + +- sunos4*) +- archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' +- wlarc= +- hardcode_direct=yes +- hardcode_shlibpath_var=no +- ;; + +- *) +- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then +- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' +- else +- ld_shlibs=no +- fi +- ;; +- esac + +- if test "$ld_shlibs" = no; then +- runpath_var= +- hardcode_libdir_flag_spec= +- export_dynamic_flag_spec= +- whole_archive_flag_spec= +- fi +- else +- # PORTME fill in a description of your system's linker (not GNU ld) +- case $host_os in +- aix3*) +- allow_undefined_flag=unsupported +- always_export_symbols=yes +- archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' +- # Note: this linker hardcodes the directories in LIBPATH if there +- # are no directories specified by -L. +- hardcode_minus_L=yes +- if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then +- # Neither direct hardcoding nor static linking is supported with a +- # broken collect2. +- hardcode_direct=unsupported +- fi +- ;; + +- aix[4-9]*) +- if test "$host_cpu" = ia64; then +- # On IA64, the linker does run time linking by default, so we don't +- # have to do anything special. +- aix_use_runtimelinking=no +- exp_sym_flag='-Bexport' +- no_entry_flag="" +- else +- # If we're using GNU nm, then we don't want the "-C" option. +- # -C means demangle to AIX nm, but means don't demangle with GNU nm +- if $NM -V 2>&1 | grep 'GNU' > /dev/null; then +- export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' +- else +- export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' +- fi +- aix_use_runtimelinking=no + +- # Test if we are trying to use run time linking or normal +- # AIX style linking. If -brtl is somewhere in LDFLAGS, we +- # need to do runtime linking. +- case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) +- for ld_flag in $LDFLAGS; do +- if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then +- aix_use_runtimelinking=yes +- break +- fi +- done +- ;; +- esac + +- exp_sym_flag='-bexport' +- no_entry_flag='-bnoentry' +- fi + +- # When large executables or shared objects are built, AIX ld can +- # have problems creating the table of contents. If linking a library +- # or program results in "error TOC overflow" add -mminimal-toc to +- # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not +- # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + +- archive_cmds='' +- hardcode_direct=yes +- hardcode_libdir_separator=':' +- link_all_deplibs=yes + +- if test "$GCC" = yes; then +- case $host_os in aix4.[012]|aix4.[012].*) +- # We only want to do this on AIX 4.2 and lower, the check +- # below for broken collect2 doesn't work under 4.3+ +- collect2name=`${CC} -print-prog-name=collect2` +- if test -f "$collect2name" && \ +- strings "$collect2name" | grep resolve_lib_name >/dev/null +- then +- # We have reworked collect2 +- : +- else +- # We have old collect2 +- hardcode_direct=unsupported +- # It fails to find uninstalled libraries when the uninstalled +- # path is not listed in the libpath. Setting hardcode_minus_L +- # to unsupported forces relinking +- hardcode_minus_L=yes +- hardcode_libdir_flag_spec='-L$libdir' +- hardcode_libdir_separator= +- fi +- ;; +- esac +- shared_flag='-shared' +- if test "$aix_use_runtimelinking" = yes; then +- shared_flag="$shared_flag "'${wl}-G' +- fi +- else +- # not using gcc +- if test "$host_cpu" = ia64; then +- # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release +- # chokes on -Wl,-G. The following line is correct: +- shared_flag='-G' +- else +- if test "$aix_use_runtimelinking" = yes; then +- shared_flag='${wl}-G' +- else +- shared_flag='${wl}-bM:SRE' +- fi +- fi +- fi + +- # It seems that -bexpall does not export symbols beginning with +- # underscore (_), so it is better to generate a list of symbols to export. +- always_export_symbols=yes +- if test "$aix_use_runtimelinking" = yes; then +- # Warning - without using the other runtime loading flags (-brtl), +- # -berok will link without error, but may produce a broken library. +- allow_undefined_flag='-berok' +- # Determine the default libpath from the value encoded in an empty executable. +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ + +-int +-main () +-{ + +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then + +-lt_aix_libpath_sed=' +- /Import File Strings/,/^$/ { +- /^0/ { +- s/^0 *\(.*\)$/\1/ +- p +- } +- }' +-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +-# Check for a 64-bit object if we didn't find anything. +-if test -z "$aix_libpath"; then +- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` ++if test -n "${ZSH_VERSION+set}" ; then ++ setopt NO_GLOB_SUBST + fi +-else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- + ++{ echo "$as_me:$LINENO: checking for objdir" >&5 ++echo $ECHO_N "checking for objdir... $ECHO_C" >&6; } ++if test "${lt_cv_objdir+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ rm -f .libs 2>/dev/null ++mkdir .libs 2>/dev/null ++if test -d .libs; then ++ lt_cv_objdir=.libs ++else ++ # MS-DOS does not allow filenames that begin with a dot. ++ lt_cv_objdir=_libs ++fi ++rmdir .libs 2>/dev/null + fi ++{ echo "$as_me:$LINENO: result: $lt_cv_objdir" >&5 ++echo "${ECHO_T}$lt_cv_objdir" >&6; } ++objdir=$lt_cv_objdir + +-rm -rf conftest.dSYM +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext +-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + +- hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" +- archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" +- else +- if test "$host_cpu" = ia64; then +- hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' +- allow_undefined_flag="-z nodefs" +- archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" +- else +- # Determine the default libpath from the value encoded in an empty executable. +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ + +-int +-main () +-{ + +- ; +- return 0; +-} ++ ++cat >>confdefs.h <<_ACEOF ++#define LT_OBJDIR "$lt_cv_objdir/" + _ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then + +-lt_aix_libpath_sed=' +- /Import File Strings/,/^$/ { +- /^0/ { +- s/^0 *\(.*\)$/\1/ +- p +- } +- }' +-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +-# Check for a 64-bit object if we didn't find anything. +-if test -z "$aix_libpath"; then +- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +-fi +-else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 + + +-fi + +-rm -rf conftest.dSYM +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext +-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + +- hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" +- # Warning - without using the other run time loading flags, +- # -berok will link without error, but may produce a broken library. +- no_undefined_flag=' ${wl}-bernotok' +- allow_undefined_flag=' ${wl}-berok' +- # Exported symbols can be pulled into shared objects from archives +- whole_archive_flag_spec='$convenience' +- archive_cmds_need_lc=yes +- # This is similar to how AIX traditionally builds its shared libraries. +- archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' +- fi +- fi +- ;; + +- amigaos*) +- archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' +- hardcode_libdir_flag_spec='-L$libdir' +- hardcode_minus_L=yes +- # see comment about different semantics on the GNU ld section +- ld_shlibs=no +- ;; + +- bsdi[45]*) +- export_dynamic_flag_spec=-rdynamic +- ;; + +- cygwin* | mingw* | pw32*) +- # When not using gcc, we currently assume that we are using +- # Microsoft Visual C++. +- # hardcode_libdir_flag_spec is actually meaningless, as there is +- # no search path for DLLs. +- hardcode_libdir_flag_spec=' ' +- allow_undefined_flag=unsupported +- # Tell ltmain to make .lib files, not .a files. +- libext=lib +- # Tell ltmain to make .dll files, not .so files. +- shrext_cmds=".dll" +- # FIXME: Setting linknames here is a bad hack. +- archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames=' +- # The linker will automatically build a .lib file if we build a DLL. +- old_archive_From_new_cmds='true' +- # FIXME: Should let the user specify the lib program. +- old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs' +- fix_srcfile_path='`cygpath -w "$srcfile"`' +- enable_shared_with_static_runtimes=yes +- ;; + +- darwin* | rhapsody*) +- case $host_os in +- rhapsody* | darwin1.[012]) +- allow_undefined_flag='${wl}-undefined ${wl}suppress' +- ;; +- *) # Darwin 1.3 on +- if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then +- allow_undefined_flag='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' +- else +- case ${MACOSX_DEPLOYMENT_TARGET} in +- 10.[012]) +- allow_undefined_flag='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' +- ;; +- 10.*) +- allow_undefined_flag='${wl}-undefined ${wl}dynamic_lookup' +- ;; +- esac +- fi +- ;; +- esac +- archive_cmds_need_lc=no +- hardcode_direct=no +- hardcode_automatic=yes +- hardcode_shlibpath_var=unsupported +- whole_archive_flag_spec='' +- link_all_deplibs=yes +- if test "$GCC" = yes ; then +- output_verbose_link_cmd='echo' +- archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" +- module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" +- archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" +- module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" +- else +- case $cc_basename in +- xlc*) +- output_verbose_link_cmd='echo' +- archive_cmds='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring' +- module_cmds='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' +- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds +- archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' +- module_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' +- ;; +- *) +- ld_shlibs=no +- ;; +- esac +- fi +- ;; + +- dgux*) +- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- hardcode_libdir_flag_spec='-L$libdir' +- hardcode_shlibpath_var=no +- ;; + +- freebsd1*) +- ld_shlibs=no +- ;; + +- # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor +- # support. Future versions do this automatically, but an explicit c++rt0.o +- # does not break anything, and helps significantly (at the cost of a little +- # extra space). +- freebsd2.2*) +- archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' +- hardcode_libdir_flag_spec='-R$libdir' +- hardcode_direct=yes +- hardcode_shlibpath_var=no +- ;; + +- # Unfortunately, older versions of FreeBSD 2 do not have this feature. +- freebsd2*) +- archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' +- hardcode_direct=yes +- hardcode_minus_L=yes +- hardcode_shlibpath_var=no +- ;; + +- # FreeBSD 3 and greater uses gcc -shared to do shared libraries. +- freebsd* | dragonfly*) +- archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' +- hardcode_libdir_flag_spec='-R$libdir' +- hardcode_direct=yes +- hardcode_shlibpath_var=no +- ;; + +- hpux9*) +- if test "$GCC" = yes; then +- archive_cmds='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' +- else +- archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' +- fi +- hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' +- hardcode_libdir_separator=: +- hardcode_direct=yes + +- # hardcode_minus_L: Not really in the search PATH, +- # but as the default location of the library. +- hardcode_minus_L=yes +- export_dynamic_flag_spec='${wl}-E' +- ;; + +- hpux10*) +- if test "$GCC" = yes -a "$with_gnu_ld" = no; then +- archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' +- else +- archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' +- fi +- if test "$with_gnu_ld" = no; then +- hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' +- hardcode_libdir_separator=: ++case $host_os in ++aix3*) ++ # AIX sometimes has problems with the GCC collect2 program. For some ++ # reason, if we set the COLLECT_NAMES environment variable, the problems ++ # vanish in a puff of smoke. ++ if test "X${COLLECT_NAMES+set}" != Xset; then ++ COLLECT_NAMES= ++ export COLLECT_NAMES ++ fi ++ ;; ++esac + +- hardcode_direct=yes +- export_dynamic_flag_spec='${wl}-E' ++# Sed substitution that helps us do robust quoting. It backslashifies ++# metacharacters that are still active within double-quoted strings. ++sed_quote_subst='s/\(["`$\\]\)/\\\1/g' + +- # hardcode_minus_L: Not really in the search PATH, +- # but as the default location of the library. +- hardcode_minus_L=yes +- fi +- ;; ++# Same as above, but do not quote variable references. ++double_quote_subst='s/\(["`\\]\)/\\\1/g' + +- hpux11*) +- if test "$GCC" = yes -a "$with_gnu_ld" = no; then +- case $host_cpu in +- hppa*64*) +- archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' +- ;; +- ia64*) +- archive_cmds='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' +- ;; +- *) +- archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' +- ;; +- esac +- else +- case $host_cpu in +- hppa*64*) +- archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' +- ;; +- ia64*) +- archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' +- ;; +- *) +- archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' +- ;; +- esac +- fi +- if test "$with_gnu_ld" = no; then +- hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' +- hardcode_libdir_separator=: ++# Sed substitution to delay expansion of an escaped shell variable in a ++# double_quote_subst'ed string. ++delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' + +- case $host_cpu in +- hppa*64*|ia64*) +- hardcode_libdir_flag_spec_ld='+b $libdir' +- hardcode_direct=no +- hardcode_shlibpath_var=no +- ;; +- *) +- hardcode_direct=yes +- export_dynamic_flag_spec='${wl}-E' ++# Sed substitution to delay expansion of an escaped single quote. ++delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' + +- # hardcode_minus_L: Not really in the search PATH, +- # but as the default location of the library. +- hardcode_minus_L=yes +- ;; +- esac +- fi +- ;; ++# Sed substitution to avoid accidental globbing in evaled expressions ++no_glob_subst='s/\*/\\\*/g' + +- irix5* | irix6* | nonstopux*) +- if test "$GCC" = yes; then +- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' +- else +- archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' +- hardcode_libdir_flag_spec_ld='-rpath $libdir' +- fi +- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' +- hardcode_libdir_separator=: +- link_all_deplibs=yes +- ;; ++# Global variables: ++ofile=libtool ++can_build_shared=yes + +- netbsd*) +- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then +- archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out +- else +- archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF +- fi +- hardcode_libdir_flag_spec='-R$libdir' +- hardcode_direct=yes +- hardcode_shlibpath_var=no +- ;; ++# All known linkers require a `.a' archive for static linking (except MSVC, ++# which needs '.lib'). ++libext=a + +- newsos6) +- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- hardcode_direct=yes +- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' +- hardcode_libdir_separator=: +- hardcode_shlibpath_var=no +- ;; ++with_gnu_ld="$lt_cv_prog_gnu_ld" + +- openbsd*) +- if test -f /usr/libexec/ld.so; then +- hardcode_direct=yes +- hardcode_shlibpath_var=no +- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then +- archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' +- archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' +- hardcode_libdir_flag_spec='${wl}-rpath,$libdir' +- export_dynamic_flag_spec='${wl}-E' +- else +- case $host_os in +- openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) +- archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' +- hardcode_libdir_flag_spec='-R$libdir' +- ;; +- *) +- archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' +- hardcode_libdir_flag_spec='${wl}-rpath,$libdir' +- ;; +- esac +- fi +- else +- ld_shlibs=no +- fi +- ;; ++old_CC="$CC" ++old_CFLAGS="$CFLAGS" + +- os2*) +- hardcode_libdir_flag_spec='-L$libdir' +- hardcode_minus_L=yes +- allow_undefined_flag=unsupported +- archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' +- old_archive_From_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' +- ;; ++# Set sane defaults for various variables ++test -z "$CC" && CC=cc ++test -z "$LTCC" && LTCC=$CC ++test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS ++test -z "$LD" && LD=ld ++test -z "$ac_objext" && ac_objext=o + +- osf3*) +- if test "$GCC" = yes; then +- allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' +- archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' +- else +- allow_undefined_flag=' -expect_unresolved \*' +- archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' +- fi +- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' +- hardcode_libdir_separator=: +- ;; ++for cc_temp in $compiler""; do ++ case $cc_temp in ++ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; ++ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; ++ \-*) ;; ++ *) break;; ++ esac ++done ++cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` + +- osf4* | osf5*) # as osf3* with the addition of -msym flag +- if test "$GCC" = yes; then +- allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' +- archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' +- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' +- else +- allow_undefined_flag=' -expect_unresolved \*' +- archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' +- archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ +- $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp' + +- # Both c and cxx compiler support -rpath directly +- hardcode_libdir_flag_spec='-rpath $libdir' +- fi +- hardcode_libdir_separator=: +- ;; ++# Only perform the check for file, if the check method requires it ++test -z "$MAGIC_CMD" && MAGIC_CMD=file ++case $deplibs_check_method in ++file_magic*) ++ if test "$file_magic_cmd" = '$MAGIC_CMD'; then ++ { echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5 ++echo $ECHO_N "checking for ${ac_tool_prefix}file... $ECHO_C" >&6; } ++if test "${lt_cv_path_MAGIC_CMD+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ case $MAGIC_CMD in ++[\\/*] | ?:[\\/]*) ++ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. ++ ;; ++*) ++ lt_save_MAGIC_CMD="$MAGIC_CMD" ++ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR ++ ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" ++ for ac_dir in $ac_dummy; do ++ IFS="$lt_save_ifs" ++ test -z "$ac_dir" && ac_dir=. ++ if test -f $ac_dir/${ac_tool_prefix}file; then ++ lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file" ++ if test -n "$file_magic_test_file"; then ++ case $deplibs_check_method in ++ "file_magic "*) ++ file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` ++ MAGIC_CMD="$lt_cv_path_MAGIC_CMD" ++ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | ++ $EGREP "$file_magic_regex" > /dev/null; then ++ : ++ else ++ cat <<_LT_EOF 1>&2 + +- solaris*) +- no_undefined_flag=' -z text' +- if test "$GCC" = yes; then +- wlarc='${wl}' +- archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' +- archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ +- $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp' +- else +- wlarc='' +- archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' +- archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ +- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' +- fi +- hardcode_libdir_flag_spec='-R$libdir' +- hardcode_shlibpath_var=no +- case $host_os in +- solaris2.[0-5] | solaris2.[0-5].*) ;; +- *) +- # The compiler driver will combine and reorder linker options, +- # but understands `-z linker_flag'. GCC discards it without `$wl', +- # but is careful enough not to reorder. +- # Supported since Solaris 2.6 (maybe 2.5.1?) +- if test "$GCC" = yes; then +- whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' +- else +- whole_archive_flag_spec='-z allextract$convenience -z defaultextract' +- fi +- ;; +- esac +- link_all_deplibs=yes +- ;; ++*** Warning: the command libtool uses to detect shared libraries, ++*** $file_magic_cmd, produces output that libtool cannot recognize. ++*** The result is that libtool may fail to recognize shared libraries ++*** as such. This will affect the creation of libtool libraries that ++*** depend on shared libraries, but programs linked with such libtool ++*** libraries will work regardless of this problem. Nevertheless, you ++*** may want to report the problem to your system manager and/or to ++*** bug-libtool@gnu.org + +- sunos4*) +- if test "x$host_vendor" = xsequent; then +- # Use $CC to link under sequent, because it throws in some extra .o +- # files that make .init and .fini sections work. +- archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' +- else +- archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' ++_LT_EOF ++ fi ;; ++ esac + fi +- hardcode_libdir_flag_spec='-L$libdir' +- hardcode_direct=yes +- hardcode_minus_L=yes +- hardcode_shlibpath_var=no +- ;; ++ break ++ fi ++ done ++ IFS="$lt_save_ifs" ++ MAGIC_CMD="$lt_save_MAGIC_CMD" ++ ;; ++esac ++fi + +- sysv4) +- case $host_vendor in +- sni) +- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- hardcode_direct=yes # is this really true??? +- ;; +- siemens) +- ## LD is ld it makes a PLAMLIB +- ## CC just makes a GrossModule. +- archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' +- reload_cmds='$CC -r -o $output$reload_objs' +- hardcode_direct=no +- ;; +- motorola) +- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- hardcode_direct=no #Motorola manual says yes, but my tests say they lie +- ;; +- esac +- runpath_var='LD_RUN_PATH' +- hardcode_shlibpath_var=no +- ;; +- +- sysv4.3*) +- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- hardcode_shlibpath_var=no +- export_dynamic_flag_spec='-Bexport' +- ;; +- +- sysv4*MP*) +- if test -d /usr/nec; then +- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- hardcode_shlibpath_var=no +- runpath_var=LD_RUN_PATH +- hardcode_runpath_var=yes +- ld_shlibs=yes +- fi +- ;; +- +- sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) +- no_undefined_flag='${wl}-z,text' +- archive_cmds_need_lc=no +- hardcode_shlibpath_var=no +- runpath_var='LD_RUN_PATH' +- +- if test "$GCC" = yes; then +- archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' +- archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' +- else +- archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' +- archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' +- fi +- ;; +- +- sysv5* | sco3.2v5* | sco5v6*) +- # Note: We can NOT use -z defs as we might desire, because we do not +- # link with -lc, and that would cause any symbols used from libc to +- # always be unresolved, which means just about no library would +- # ever link correctly. If we're not using GNU ld we use -z text +- # though, which does catch some bad symbols but isn't as heavy-handed +- # as -z defs. +- no_undefined_flag='${wl}-z,text' +- allow_undefined_flag='${wl}-z,nodefs' +- archive_cmds_need_lc=no +- hardcode_shlibpath_var=no +- hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' +- hardcode_libdir_separator=':' +- link_all_deplibs=yes +- export_dynamic_flag_spec='${wl}-Bexport' +- runpath_var='LD_RUN_PATH' ++MAGIC_CMD="$lt_cv_path_MAGIC_CMD" ++if test -n "$MAGIC_CMD"; then ++ { echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 ++echo "${ECHO_T}$MAGIC_CMD" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi + +- if test "$GCC" = yes; then +- archive_cmds='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' +- archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' +- else +- archive_cmds='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' +- archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' +- fi +- ;; + +- uts4*) +- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- hardcode_libdir_flag_spec='-L$libdir' +- hardcode_shlibpath_var=no +- ;; + +- *) +- ld_shlibs=no +- ;; +- esac +- fi + +-{ $as_echo "$as_me:$LINENO: result: $ld_shlibs" >&5 +-$as_echo "$ld_shlibs" >&6; } +-test "$ld_shlibs" = no && can_build_shared=no + +-# +-# Do we need to explicitly link libc? +-# +-case "x$archive_cmds_need_lc" in +-x|xyes) +- # Assume -lc should be added +- archive_cmds_need_lc=yes ++if test -z "$lt_cv_path_MAGIC_CMD"; then ++ if test -n "$ac_tool_prefix"; then ++ { echo "$as_me:$LINENO: checking for file" >&5 ++echo $ECHO_N "checking for file... $ECHO_C" >&6; } ++if test "${lt_cv_path_MAGIC_CMD+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ case $MAGIC_CMD in ++[\\/*] | ?:[\\/]*) ++ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. ++ ;; ++*) ++ lt_save_MAGIC_CMD="$MAGIC_CMD" ++ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR ++ ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" ++ for ac_dir in $ac_dummy; do ++ IFS="$lt_save_ifs" ++ test -z "$ac_dir" && ac_dir=. ++ if test -f $ac_dir/file; then ++ lt_cv_path_MAGIC_CMD="$ac_dir/file" ++ if test -n "$file_magic_test_file"; then ++ case $deplibs_check_method in ++ "file_magic "*) ++ file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` ++ MAGIC_CMD="$lt_cv_path_MAGIC_CMD" ++ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | ++ $EGREP "$file_magic_regex" > /dev/null; then ++ : ++ else ++ cat <<_LT_EOF 1>&2 + +- if test "$enable_shared" = yes && test "$GCC" = yes; then +- case $archive_cmds in +- *'~'*) +- # FIXME: we may have to deal with multi-command sequences. +- ;; +- '$CC '*) +- # Test whether the compiler implicitly links with -lc since on some +- # systems, -lgcc has to come before -lc. If gcc already passes -lc +- # to ld, don't add -lc before -lgcc. +- { $as_echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 +-$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; } +- $rm conftest* +- echo "$lt_simple_compile_test_code" > conftest.$ac_ext ++*** Warning: the command libtool uses to detect shared libraries, ++*** $file_magic_cmd, produces output that libtool cannot recognize. ++*** The result is that libtool may fail to recognize shared libraries ++*** as such. This will affect the creation of libtool libraries that ++*** depend on shared libraries, but programs linked with such libtool ++*** libraries will work regardless of this problem. Nevertheless, you ++*** may want to report the problem to your system manager and/or to ++*** bug-libtool@gnu.org + +- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>&5 +- ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } 2>conftest.err; then +- soname=conftest +- lib=conftest +- libobjs=conftest.$ac_objext +- deplibs= +- wl=$lt_prog_compiler_wl +- pic_flag=$lt_prog_compiler_pic +- compiler_flags=-v +- linker_flags=-v +- verstring= +- output_objdir=. +- libname=conftest +- lt_save_allow_undefined_flag=$allow_undefined_flag +- allow_undefined_flag= +- if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5 +- (eval $archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5 +- ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } +- then +- archive_cmds_need_lc=no +- else +- archive_cmds_need_lc=yes +- fi +- allow_undefined_flag=$lt_save_allow_undefined_flag +- else +- cat conftest.err 1>&5 ++_LT_EOF ++ fi ;; ++ esac + fi +- $rm conftest* +- { $as_echo "$as_me:$LINENO: result: $archive_cmds_need_lc" >&5 +-$as_echo "$archive_cmds_need_lc" >&6; } +- ;; +- esac +- fi ++ break ++ fi ++ done ++ IFS="$lt_save_ifs" ++ MAGIC_CMD="$lt_save_MAGIC_CMD" + ;; + esac ++fi ++ ++MAGIC_CMD="$lt_cv_path_MAGIC_CMD" ++if test -n "$MAGIC_CMD"; then ++ { echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 ++echo "${ECHO_T}$MAGIC_CMD" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi + +-{ $as_echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 +-$as_echo_n "checking dynamic linker characteristics... " >&6; } +-library_names_spec= +-libname_spec='lib$name' +-soname_spec= +-shrext_cmds=".so" +-postinstall_cmds= +-postuninstall_cmds= +-finish_cmds= +-finish_eval= +-shlibpath_var= +-shlibpath_overrides_runpath=unknown +-version_type=none +-dynamic_linker="$host_os ld.so" +-sys_lib_dlsearch_path_spec="/lib /usr/lib" + +-if test "$GCC" = yes; then +- case $host_os in +- darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; +- *) lt_awk_arg="/^libraries:/" ;; +- esac +- lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"` +- if echo "$lt_search_path_spec" | grep ';' >/dev/null ; then +- # if the path contains ";" then we assume it to be the separator +- # otherwise default to the standard path separator (i.e. ":") - it is +- # assumed that no part of a normal pathname contains ";" but that should +- # okay in the real world where ";" in dirpaths is itself problematic. +- lt_search_path_spec=`echo "$lt_search_path_spec" | $SED -e 's/;/ /g'` + else +- lt_search_path_spec=`echo "$lt_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` ++ MAGIC_CMD=: + fi +- # Ok, now we have the path, separated by spaces, we can step through it +- # and add multilib dir if necessary. +- lt_tmp_lt_search_path_spec= +- lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` +- for lt_sys_path in $lt_search_path_spec; do +- if test -d "$lt_sys_path/$lt_multi_os_dir"; then +- lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir" +- else +- test -d "$lt_sys_path" && \ +- lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" +- fi +- done +- lt_search_path_spec=`echo $lt_tmp_lt_search_path_spec | awk ' +-BEGIN {RS=" "; FS="/|\n";} { +- lt_foo=""; +- lt_count=0; +- for (lt_i = NF; lt_i > 0; lt_i--) { +- if ($lt_i != "" && $lt_i != ".") { +- if ($lt_i == "..") { +- lt_count++; +- } else { +- if (lt_count == 0) { +- lt_foo="/" $lt_i lt_foo; +- } else { +- lt_count--; +- } +- } +- } +- } +- if (lt_foo != "") { lt_freq[lt_foo]++; } +- if (lt_freq[lt_foo] == 1) { print lt_foo; } +-}'` +- sys_lib_search_path_spec=`echo $lt_search_path_spec` +-else +- sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" + fi +-need_lib_prefix=unknown +-hardcode_into_libs=no + +-# when you set need_version to no, make sure it does not cause -set_version +-# flags to be left without arguments +-need_version=unknown ++ fi ++ ;; ++esac + +-case $host_os in +-aix3*) +- version_type=linux +- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' +- shlibpath_var=LIBPATH ++# Use C for the default configuration in the libtool script + +- # AIX 3 has no versioning support, so we append a major version to the name. +- soname_spec='${libname}${release}${shared_ext}$major' +- ;; ++lt_save_CC="$CC" ++ac_ext=c ++ac_cpp='$CPP $CPPFLAGS' ++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_c_compiler_gnu + +-aix[4-9]*) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- hardcode_into_libs=yes +- if test "$host_cpu" = ia64; then +- # AIX 5 supports IA64 +- library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' +- shlibpath_var=LD_LIBRARY_PATH +- else +- # With GCC up to 2.95.x, collect2 would create an import file +- # for dependence libraries. The import file would start with +- # the line `#! .'. This would cause the generated library to +- # depend on `.', always an invalid library. This was fixed in +- # development snapshots of GCC prior to 3.0. +- case $host_os in +- aix4 | aix4.[01] | aix4.[01].*) +- if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' +- echo ' yes ' +- echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then +- : +- else +- can_build_shared=no +- fi +- ;; +- esac +- # AIX (on Power*) has no versioning support, so currently we can not hardcode correct +- # soname into executable. Probably we can add versioning support to +- # collect2, so additional links can be useful in future. +- if test "$aix_use_runtimelinking" = yes; then +- # If using run time linking (on AIX 4.2 or later) use lib.so +- # instead of lib.a to let people know that these are not +- # typical AIX shared libraries. +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- else +- # We preserve .a as extension for shared libraries through AIX4.2 +- # and later when we are not doing run time linking. +- library_names_spec='${libname}${release}.a $libname.a' +- soname_spec='${libname}${release}${shared_ext}$major' +- fi +- shlibpath_var=LIBPATH +- fi +- ;; + +-amigaos*) +- library_names_spec='$libname.ixlibrary $libname.a' +- # Create ${libname}_ixlibrary.a entries in /sys/libs. +- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' +- ;; ++# Source file extension for C test sources. ++ac_ext=c + +-beos*) +- library_names_spec='${libname}${shared_ext}' +- dynamic_linker="$host_os ld.so" +- shlibpath_var=LIBRARY_PATH +- ;; ++# Object file extension for compiled C test sources. ++objext=o ++objext=$objext + +-bsdi[45]*) +- version_type=linux +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' +- shlibpath_var=LD_LIBRARY_PATH +- sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" +- sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" +- # the default ld.so.conf also contains /usr/contrib/lib and +- # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow +- # libtool to hard-code these into programs +- ;; ++# Code to be used in simple compile tests ++lt_simple_compile_test_code="int some_variable = 0;" + +-cygwin* | mingw* | pw32*) +- version_type=windows +- shrext_cmds=".dll" +- need_version=no +- need_lib_prefix=no ++# Code to be used in simple link tests ++lt_simple_link_test_code='int main(){return(0);}' + +- case $GCC,$host_os in +- yes,cygwin* | yes,mingw* | yes,pw32*) +- library_names_spec='$libname.dll.a' +- # DLL is installed to $(libdir)/../bin by postinstall_cmds +- postinstall_cmds='base_file=`basename \${file}`~ +- dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ +- dldir=$destdir/`dirname \$dlpath`~ +- test -d \$dldir || mkdir -p \$dldir~ +- $install_prog $dir/$dlname \$dldir/$dlname~ +- chmod a+x \$dldir/$dlname' +- postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ +- dlpath=$dir/\$dldll~ +- $rm \$dlpath' +- shlibpath_overrides_runpath=yes + +- case $host_os in +- cygwin*) +- # Cygwin DLLs use 'cyg' prefix rather than 'lib' +- soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' +- sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" +- ;; +- mingw*) +- # MinGW DLLs use traditional 'lib' prefix +- soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' +- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` +- if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then +- # It is most probably a Windows format PATH printed by +- # mingw gcc, but we are running on Cygwin. Gcc prints its search +- # path with ; separators, and with drive letters. We can handle the +- # drive letters (cygwin fileutils understands them), so leave them, +- # especially as we might pass files found there to a mingw objdump, +- # which wouldn't understand a cygwinified path. Ahh. +- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` +- else +- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` +- fi +- ;; +- pw32*) +- # pw32 DLLs use 'pw' prefix rather than 'lib' +- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' +- ;; +- esac +- ;; + +- *) +- library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' +- ;; +- esac +- dynamic_linker='Win32 ld.exe' +- # FIXME: first we should search . and the directory the executable is in +- shlibpath_var=PATH +- ;; + +-darwin* | rhapsody*) +- dynamic_linker="$host_os dyld" +- version_type=darwin +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext' +- soname_spec='${libname}${release}${major}$shared_ext' +- shlibpath_overrides_runpath=yes +- shlibpath_var=DYLD_LIBRARY_PATH +- shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' + +- sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib" +- sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' +- ;; + +-dgux*) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- ;; + +-freebsd1*) +- dynamic_linker=no +- ;; ++# If no C compiler was specified, use CC. ++LTCC=${LTCC-"$CC"} + +-freebsd* | dragonfly*) +- # DragonFly does not have aout. When/if they implement a new +- # versioning mechanism, adjust this. +- if test -x /usr/bin/objformat; then +- objformat=`/usr/bin/objformat` +- else +- case $host_os in +- freebsd[123]*) objformat=aout ;; +- *) objformat=elf ;; +- esac +- fi +- version_type=freebsd-$objformat +- case $version_type in +- freebsd-elf*) +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' +- need_version=no +- need_lib_prefix=no +- ;; +- freebsd-*) +- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' +- need_version=yes +- ;; +- esac +- shlibpath_var=LD_LIBRARY_PATH +- case $host_os in +- freebsd2*) +- shlibpath_overrides_runpath=yes +- ;; +- freebsd3.[01]* | freebsdelf3.[01]*) +- shlibpath_overrides_runpath=yes +- hardcode_into_libs=yes +- ;; +- freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ +- freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) +- shlibpath_overrides_runpath=no +- hardcode_into_libs=yes +- ;; +- *) # from 4.6 on, and DragonFly +- shlibpath_overrides_runpath=yes +- hardcode_into_libs=yes +- ;; +- esac +- ;; ++# If no C compiler flags were specified, use CFLAGS. ++LTCFLAGS=${LTCFLAGS-"$CFLAGS"} + +-gnu*) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- hardcode_into_libs=yes +- ;; ++# Allow CC to be a program name with arguments. ++compiler=$CC + +-hpux9* | hpux10* | hpux11*) +- # Give a soname corresponding to the major version so that dld.sl refuses to +- # link against other versions. +- version_type=sunos +- need_lib_prefix=no +- need_version=no +- case $host_cpu in +- ia64*) +- shrext_cmds='.so' +- hardcode_into_libs=yes +- dynamic_linker="$host_os dld.so" +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- if test "X$HPUX_IA64_MODE" = X32; then +- sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" +- else +- sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" +- fi +- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec +- ;; +- hppa*64*) +- shrext_cmds='.sl' +- hardcode_into_libs=yes +- dynamic_linker="$host_os dld.sl" +- shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH +- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" +- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec +- ;; +- *) +- shrext_cmds='.sl' +- dynamic_linker="$host_os dld.sl" +- shlibpath_var=SHLIB_PATH +- shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- ;; +- esac +- # HP-UX runs *really* slowly unless shared libraries are mode 555. +- postinstall_cmds='chmod 555 $lib' +- ;; ++# Save the default compiler, since it gets overwritten when the other ++# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP. ++compiler_DEFAULT=$CC + +-interix[3-9]*) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=no +- hardcode_into_libs=yes +- ;; ++# save warnings/boilerplate of simple test code ++ac_outfile=conftest.$ac_objext ++echo "$lt_simple_compile_test_code" >conftest.$ac_ext ++eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err ++_lt_compiler_boilerplate=`cat conftest.err` ++$RM conftest* + +-irix5* | irix6* | nonstopux*) +- case $host_os in +- nonstopux*) version_type=nonstopux ;; +- *) +- if test "$lt_cv_prog_gnu_ld" = yes; then +- version_type=linux +- else +- version_type=irix +- fi ;; +- esac +- need_lib_prefix=no +- need_version=no +- soname_spec='${libname}${release}${shared_ext}$major' +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' +- case $host_os in +- irix5* | nonstopux*) +- libsuff= shlibsuff= +- ;; +- *) +- case $LD in # libtool.m4 will add one of these switches to LD +- *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") +- libsuff= shlibsuff= libmagic=32-bit;; +- *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") +- libsuff=32 shlibsuff=N32 libmagic=N32;; +- *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") +- libsuff=64 shlibsuff=64 libmagic=64-bit;; +- *) libsuff= shlibsuff= libmagic=never-match;; +- esac +- ;; +- esac +- shlibpath_var=LD_LIBRARY${shlibsuff}_PATH +- shlibpath_overrides_runpath=no +- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" +- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" +- hardcode_into_libs=yes +- ;; ++ac_outfile=conftest.$ac_objext ++echo "$lt_simple_link_test_code" >conftest.$ac_ext ++eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err ++_lt_linker_boilerplate=`cat conftest.err` ++$RM -r conftest* + +-# No shared lib support for Linux oldld, aout, or coff. +-linux*oldld* | linux*aout* | linux*coff*) +- dynamic_linker=no +- ;; + +-# This must be Linux ELF. +-linux* | k*bsd*-gnu) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=no +- # This implies no fast_install, which is unacceptable. +- # Some rework will be needed to allow for fast_install +- # before this can be enabled. +- hardcode_into_libs=yes +- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" +- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" ++if test -n "$compiler"; then + +- # Append ld.so.conf contents to the search path +- if test -f /etc/ld.so.conf; then +- lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` +- sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra" +- fi ++lt_prog_compiler_no_builtin_flag= + +- # We used to test for /lib/ld.so.1 and disable shared libraries on +- # powerpc, because MkLinux only supported shared libraries with the +- # GNU dynamic linker. Since this was broken with cross compilers, +- # most powerpc-linux boxes support dynamic linking these days and +- # people can always --disable-shared, the test was removed, and we +- # assume the GNU/Linux dynamic linker is in use. +- dynamic_linker='GNU/Linux ld.so' +- ;; ++if test "$GCC" = yes; then ++ lt_prog_compiler_no_builtin_flag=' -fno-builtin' + +-netbsd*) +- version_type=sunos +- need_lib_prefix=no +- need_version=no +- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' +- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' +- dynamic_linker='NetBSD (a.out) ld.so' +- else +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- dynamic_linker='NetBSD ld.elf_so' +- fi +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=yes +- hardcode_into_libs=yes +- ;; ++ { echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 ++echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6; } ++if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ lt_cv_prog_compiler_rtti_exceptions=no ++ ac_outfile=conftest.$ac_objext ++ echo "$lt_simple_compile_test_code" > conftest.$ac_ext ++ lt_compiler_flag="-fno-rtti -fno-exceptions" ++ # Insert the option either (1) after the last *FLAGS variable, or ++ # (2) before a word containing "conftest.", or (3) at the end. ++ # Note that $ac_compile itself does not contain backslashes and begins ++ # with a dollar sign (not a hyphen), so the echo should work correctly. ++ # The option is referenced via a variable to avoid confusing sed. ++ lt_compile=`echo "$ac_compile" | $SED \ ++ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ ++ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ ++ -e 's:$: $lt_compiler_flag:'` ++ (eval echo "\"\$as_me:8923: $lt_compile\"" >&5) ++ (eval "$lt_compile" 2>conftest.err) ++ ac_status=$? ++ cat conftest.err >&5 ++ echo "$as_me:8927: \$? = $ac_status" >&5 ++ if (exit $ac_status) && test -s "$ac_outfile"; then ++ # The compiler can only warn and ignore the option if not recognized ++ # So say no if there are warnings other than the usual output. ++ $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp ++ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 ++ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then ++ lt_cv_prog_compiler_rtti_exceptions=yes ++ fi ++ fi ++ $RM conftest* + +-newsos6) +- version_type=linux +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=yes +- ;; ++fi ++{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 ++echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6; } + +-nto-qnx*) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=yes +- ;; ++if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then ++ lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions" ++else ++ : ++fi + +-openbsd*) +- version_type=sunos +- sys_lib_dlsearch_path_spec="/usr/lib" +- need_lib_prefix=no +- # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. +- case $host_os in +- openbsd3.3 | openbsd3.3.*) need_version=yes ;; +- *) need_version=no ;; +- esac +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' +- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' +- shlibpath_var=LD_LIBRARY_PATH +- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then +- case $host_os in +- openbsd2.[89] | openbsd2.[89].*) +- shlibpath_overrides_runpath=no +- ;; +- *) +- shlibpath_overrides_runpath=yes +- ;; +- esac +- else +- shlibpath_overrides_runpath=yes +- fi +- ;; ++fi + +-os2*) +- libname_spec='$name' +- shrext_cmds=".dll" +- need_lib_prefix=no +- library_names_spec='$libname${shared_ext} $libname.a' +- dynamic_linker='OS/2 ld.exe' +- shlibpath_var=LIBPATH +- ;; + +-osf3* | osf4* | osf5*) +- version_type=osf +- need_lib_prefix=no +- need_version=no +- soname_spec='${libname}${release}${shared_ext}$major' +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- shlibpath_var=LD_LIBRARY_PATH +- sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" +- sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" +- ;; + +-rdos*) +- dynamic_linker=no +- ;; + +-solaris*) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=yes +- hardcode_into_libs=yes +- # ldd complains unless libraries are executable +- postinstall_cmds='chmod +x $lib' +- ;; + +-sunos4*) +- version_type=sunos +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' +- finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=yes +- if test "$with_gnu_ld" = yes; then +- need_lib_prefix=no +- fi +- need_version=yes +- ;; + +-sysv4 | sysv4.3*) +- version_type=linux +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- case $host_vendor in +- sni) +- shlibpath_overrides_runpath=no +- need_lib_prefix=no +- export_dynamic_flag_spec='${wl}-Blargedynsym' +- runpath_var=LD_RUN_PATH ++ lt_prog_compiler_wl= ++lt_prog_compiler_pic= ++lt_prog_compiler_static= ++ ++{ echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 ++echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; } ++ ++ if test "$GCC" = yes; then ++ lt_prog_compiler_wl='-Wl,' ++ lt_prog_compiler_static='-static' ++ ++ case $host_os in ++ aix*) ++ # All AIX code is PIC. ++ if test "$host_cpu" = ia64; then ++ # AIX 5 now supports IA64 processor ++ lt_prog_compiler_static='-Bstatic' ++ fi + ;; +- siemens) +- need_lib_prefix=no ++ ++ amigaos*) ++ case $host_cpu in ++ powerpc) ++ # see comment about AmigaOS4 .so support ++ lt_prog_compiler_pic='-fPIC' ++ ;; ++ m68k) ++ # FIXME: we need at least 68020 code to build shared libraries, but ++ # adding the `-m68020' flag to GCC prevents building anything better, ++ # like `-m68040'. ++ lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4' ++ ;; ++ esac + ;; +- motorola) +- need_lib_prefix=no +- need_version=no +- shlibpath_overrides_runpath=no +- sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' ++ ++ beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) ++ # PIC is the default for these OSes. + ;; +- esac +- ;; + +-sysv4*MP*) +- if test -d /usr/nec ;then +- version_type=linux +- library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' +- soname_spec='$libname${shared_ext}.$major' +- shlibpath_var=LD_LIBRARY_PATH +- fi +- ;; ++ mingw* | cygwin* | pw32* | os2*) ++ # This hack is so that the source file can tell whether it is being ++ # built for inclusion in a dll (and should export symbols for example). ++ # Although the cygwin gcc ignores -fPIC, still need this for old-style ++ # (--disable-auto-import) libraries ++ lt_prog_compiler_pic='-DDLL_EXPORT' ++ ;; + +-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) +- version_type=freebsd-elf +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- hardcode_into_libs=yes +- if test "$with_gnu_ld" = yes; then +- sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' +- shlibpath_overrides_runpath=no +- else +- sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' +- shlibpath_overrides_runpath=yes +- case $host_os in +- sco3.2v5*) +- sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" ++ darwin* | rhapsody*) ++ # PIC is the default on this platform ++ # Common symbols not allowed in MH_DYLIB files ++ lt_prog_compiler_pic='-fno-common' ++ ;; ++ ++ hpux*) ++ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but ++ # not for PA HP-UX. ++ case $host_cpu in ++ hppa*64*|ia64*) ++ # +Z the default + ;; +- esac +- fi +- sys_lib_dlsearch_path_spec='/usr/lib' +- ;; ++ *) ++ lt_prog_compiler_pic='-fPIC' ++ ;; ++ esac ++ ;; + +-uts4*) +- version_type=linux +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- ;; ++ interix[3-9]*) ++ # Interix 3.x gcc -fpic/-fPIC options generate broken code. ++ # Instead, we relocate shared libraries at runtime. ++ ;; + +-*) +- dynamic_linker=no +- ;; +-esac +-{ $as_echo "$as_me:$LINENO: result: $dynamic_linker" >&5 +-$as_echo "$dynamic_linker" >&6; } +-test "$dynamic_linker" = no && can_build_shared=no ++ msdosdjgpp*) ++ # Just because we use GCC doesn't mean we suddenly get shared libraries ++ # on systems that don't support them. ++ lt_prog_compiler_can_build_shared=no ++ enable_shared=no ++ ;; + +-if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then +- $as_echo_n "(cached) " >&6 +-else +- lt_cv_sys_lib_search_path_spec="$sys_lib_search_path_spec" +-fi ++ *nto* | *qnx*) ++ # QNX uses GNU C++, but need to define -shared option too, otherwise ++ # it will coredump. ++ lt_prog_compiler_pic='-fPIC -shared' ++ ;; + +-sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" +-if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then +- $as_echo_n "(cached) " >&6 +-else +- lt_cv_sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec" +-fi ++ sysv4*MP*) ++ if test -d /usr/nec; then ++ lt_prog_compiler_pic=-Kconform_pic ++ fi ++ ;; + +-sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" ++ *) ++ lt_prog_compiler_pic='-fPIC' ++ ;; ++ esac ++ else ++ # PORTME Check for flag to pass linker flags through the system compiler. ++ case $host_os in ++ aix*) ++ lt_prog_compiler_wl='-Wl,' ++ if test "$host_cpu" = ia64; then ++ # AIX 5 now supports IA64 processor ++ lt_prog_compiler_static='-Bstatic' ++ else ++ lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp' ++ fi ++ ;; + +-variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +-if test "$GCC" = yes; then +- variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" +-fi ++ mingw* | cygwin* | pw32* | os2*) ++ # This hack is so that the source file can tell whether it is being ++ # built for inclusion in a dll (and should export symbols for example). ++ lt_prog_compiler_pic='-DDLL_EXPORT' ++ ;; + +-{ $as_echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 +-$as_echo_n "checking how to hardcode library paths into programs... " >&6; } +-hardcode_action= +-if test -n "$hardcode_libdir_flag_spec" || \ +- test -n "$runpath_var" || \ +- test "X$hardcode_automatic" = "Xyes" ; then ++ hpux9* | hpux10* | hpux11*) ++ lt_prog_compiler_wl='-Wl,' ++ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but ++ # not for PA HP-UX. ++ case $host_cpu in ++ hppa*64*|ia64*) ++ # +Z the default ++ ;; ++ *) ++ lt_prog_compiler_pic='+Z' ++ ;; ++ esac ++ # Is there a better lt_prog_compiler_static that works with the bundled CC? ++ lt_prog_compiler_static='${wl}-a ${wl}archive' ++ ;; + +- # We can hardcode non-existant directories. +- if test "$hardcode_direct" != no && +- # If the only mechanism to avoid hardcoding is shlibpath_var, we +- # have to relink, otherwise we might link with an installed library +- # when we should be linking with a yet-to-be-installed one +- ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, )" != no && +- test "$hardcode_minus_L" != no; then +- # Linking always hardcodes the temporary library directory. +- hardcode_action=relink +- else +- # We can link without hardcoding, and we can hardcode nonexisting dirs. +- hardcode_action=immediate +- fi +-else +- # We cannot hardcode anything, or else we can only hardcode existing +- # directories. +- hardcode_action=unsupported +-fi +-{ $as_echo "$as_me:$LINENO: result: $hardcode_action" >&5 +-$as_echo "$hardcode_action" >&6; } ++ irix5* | irix6* | nonstopux*) ++ lt_prog_compiler_wl='-Wl,' ++ # PIC (with -KPIC) is the default. ++ lt_prog_compiler_static='-non_shared' ++ ;; + +-if test "$hardcode_action" = relink; then +- # Fast installation is not supported +- enable_fast_install=no +-elif test "$shlibpath_overrides_runpath" = yes || +- test "$enable_shared" = no; then +- # Fast installation is not necessary +- enable_fast_install=needless +-fi ++ linux* | k*bsd*-gnu) ++ case $cc_basename in ++ icc* | ecc* | ifort*) ++ lt_prog_compiler_wl='-Wl,' ++ lt_prog_compiler_pic='-KPIC' ++ lt_prog_compiler_static='-static' ++ ;; ++ pgcc* | pgf77* | pgf90* | pgf95*) ++ # Portland Group compilers (*not* the Pentium gcc compiler, ++ # which looks to be a dead project) ++ lt_prog_compiler_wl='-Wl,' ++ lt_prog_compiler_pic='-fpic' ++ lt_prog_compiler_static='-Bstatic' ++ ;; ++ ccc*) ++ lt_prog_compiler_wl='-Wl,' ++ # All Alpha code is PIC. ++ lt_prog_compiler_static='-non_shared' ++ ;; ++ xl*) ++ # IBM XL C 8.0/Fortran 10.1 on PPC ++ lt_prog_compiler_wl='-Wl,' ++ lt_prog_compiler_pic='-qpic' ++ lt_prog_compiler_static='-qstaticlink' ++ ;; ++ *) ++ case `$CC -V 2>&1 | sed 5q` in ++ *Sun\ C*) ++ # Sun C 5.9 ++ lt_prog_compiler_pic='-KPIC' ++ lt_prog_compiler_static='-Bstatic' ++ lt_prog_compiler_wl='-Wl,' ++ ;; ++ *Sun\ F*) ++ # Sun Fortran 8.3 passes all unrecognized flags to the linker ++ lt_prog_compiler_pic='-KPIC' ++ lt_prog_compiler_static='-Bstatic' ++ lt_prog_compiler_wl='' ++ ;; ++ esac ++ ;; ++ esac ++ ;; + +-striplib= +-old_striplib= +-{ $as_echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5 +-$as_echo_n "checking whether stripping libraries is possible... " >&6; } +-if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then +- test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" +- test -z "$striplib" && striplib="$STRIP --strip-unneeded" +- { $as_echo "$as_me:$LINENO: result: yes" >&5 +-$as_echo "yes" >&6; } +-else +-# FIXME - insert some real tests, host_os isn't really good enough +- case $host_os in +- darwin*) +- if test -n "$STRIP" ; then +- striplib="$STRIP -x" +- old_striplib="$STRIP -S" +- { $as_echo "$as_me:$LINENO: result: yes" >&5 +-$as_echo "yes" >&6; } +- else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } +-fi +- ;; +- *) +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } +- ;; +- esac +-fi ++ newsos6) ++ lt_prog_compiler_pic='-KPIC' ++ lt_prog_compiler_static='-Bstatic' ++ ;; + +-if test "x$enable_dlopen" != xyes; then +- enable_dlopen=unknown +- enable_dlopen_self=unknown +- enable_dlopen_self_static=unknown +-else +- lt_cv_dlopen=no +- lt_cv_dlopen_libs= ++ *nto* | *qnx*) ++ # QNX uses GNU C++, but need to define -shared option too, otherwise ++ # it will coredump. ++ lt_prog_compiler_pic='-fPIC -shared' ++ ;; + +- case $host_os in +- beos*) +- lt_cv_dlopen="load_add_on" +- lt_cv_dlopen_libs= +- lt_cv_dlopen_self=yes +- ;; ++ osf3* | osf4* | osf5*) ++ lt_prog_compiler_wl='-Wl,' ++ # All OSF/1 code is PIC. ++ lt_prog_compiler_static='-non_shared' ++ ;; + +- mingw* | pw32*) +- lt_cv_dlopen="LoadLibrary" +- lt_cv_dlopen_libs= +- ;; ++ rdos*) ++ lt_prog_compiler_static='-non_shared' ++ ;; + +- cygwin*) +- lt_cv_dlopen="dlopen" +- lt_cv_dlopen_libs= +- ;; ++ solaris*) ++ lt_prog_compiler_pic='-KPIC' ++ lt_prog_compiler_static='-Bstatic' ++ case $cc_basename in ++ f77* | f90* | f95*) ++ lt_prog_compiler_wl='-Qoption ld ';; ++ *) ++ lt_prog_compiler_wl='-Wl,';; ++ esac ++ ;; + +- darwin*) +- # if libdl is installed we need to link against it +- { $as_echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 +-$as_echo_n "checking for dlopen in -ldl... " >&6; } +-if test "${ac_cv_lib_dl_dlopen+set}" = set; then +- $as_echo_n "(cached) " >&6 +-else +- ac_check_lib_save_LIBS=$LIBS +-LIBS="-ldl $LIBS" +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ ++ sunos4*) ++ lt_prog_compiler_wl='-Qoption ld ' ++ lt_prog_compiler_pic='-PIC' ++ lt_prog_compiler_static='-Bstatic' ++ ;; + +-/* Override any GCC internal prototype to avoid an error. +- Use char because int might match the return type of a GCC +- builtin and then its argument prototype would still apply. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-char dlopen (); +-int +-main () +-{ +-return dlopen (); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then +- ac_cv_lib_dl_dlopen=yes +-else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++ sysv4 | sysv4.2uw2* | sysv4.3*) ++ lt_prog_compiler_wl='-Wl,' ++ lt_prog_compiler_pic='-KPIC' ++ lt_prog_compiler_static='-Bstatic' ++ ;; + +- ac_cv_lib_dl_dlopen=no +-fi ++ sysv4*MP*) ++ if test -d /usr/nec ;then ++ lt_prog_compiler_pic='-Kconform_pic' ++ lt_prog_compiler_static='-Bstatic' ++ fi ++ ;; + +-rm -rf conftest.dSYM +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext +-LIBS=$ac_check_lib_save_LIBS +-fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 +-$as_echo "$ac_cv_lib_dl_dlopen" >&6; } +-if test $ac_cv_lib_dl_dlopen = yes; then +- lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" +-else ++ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) ++ lt_prog_compiler_wl='-Wl,' ++ lt_prog_compiler_pic='-KPIC' ++ lt_prog_compiler_static='-Bstatic' ++ ;; + +- lt_cv_dlopen="dyld" +- lt_cv_dlopen_libs= +- lt_cv_dlopen_self=yes ++ unicos*) ++ lt_prog_compiler_wl='-Wl,' ++ lt_prog_compiler_can_build_shared=no ++ ;; + +-fi ++ uts4*) ++ lt_prog_compiler_pic='-pic' ++ lt_prog_compiler_static='-Bstatic' ++ ;; + +- ;; ++ *) ++ lt_prog_compiler_can_build_shared=no ++ ;; ++ esac ++ fi + ++case $host_os in ++ # For platforms which do not support PIC, -DPIC is meaningless: ++ *djgpp*) ++ lt_prog_compiler_pic= ++ ;; + *) +- { $as_echo "$as_me:$LINENO: checking for shl_load" >&5 +-$as_echo_n "checking for shl_load... " >&6; } +-if test "${ac_cv_func_shl_load+set}" = set; then +- $as_echo_n "(cached) " >&6 +-else +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-/* Define shl_load to an innocuous variant, in case declares shl_load. +- For example, HP-UX 11i declares gettimeofday. */ +-#define shl_load innocuous_shl_load ++ lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC" ++ ;; ++esac ++{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic" >&5 ++echo "${ECHO_T}$lt_prog_compiler_pic" >&6; } + +-/* System header to define __stub macros and hopefully few prototypes, +- which can conflict with char shl_load (); below. +- Prefer to if __STDC__ is defined, since +- exists even on freestanding compilers. */ + +-#ifdef __STDC__ +-# include +-#else +-# include +-#endif + +-#undef shl_load + +-/* Override any GCC internal prototype to avoid an error. +- Use char because int might match the return type of a GCC +- builtin and then its argument prototype would still apply. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-char shl_load (); +-/* The GNU C library defines this for functions which it implements +- to always fail with ENOSYS. Some functions are actually named +- something starting with __ and the normal name is an alias. */ +-#if defined __stub_shl_load || defined __stub___shl_load +-choke me +-#endif + +-int +-main () +-{ +-return shl_load (); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then +- ac_cv_func_shl_load=yes +-else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 + +- ac_cv_func_shl_load=no +-fi ++# ++# Check to make sure the PIC flag actually works. ++# ++if test -n "$lt_prog_compiler_pic"; then ++ { echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 ++echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic works... $ECHO_C" >&6; } ++if test "${lt_cv_prog_compiler_pic_works+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ lt_cv_prog_compiler_pic_works=no ++ ac_outfile=conftest.$ac_objext ++ echo "$lt_simple_compile_test_code" > conftest.$ac_ext ++ lt_compiler_flag="$lt_prog_compiler_pic -DPIC" ++ # Insert the option either (1) after the last *FLAGS variable, or ++ # (2) before a word containing "conftest.", or (3) at the end. ++ # Note that $ac_compile itself does not contain backslashes and begins ++ # with a dollar sign (not a hyphen), so the echo should work correctly. ++ # The option is referenced via a variable to avoid confusing sed. ++ lt_compile=`echo "$ac_compile" | $SED \ ++ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ ++ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ ++ -e 's:$: $lt_compiler_flag:'` ++ (eval echo "\"\$as_me:9247: $lt_compile\"" >&5) ++ (eval "$lt_compile" 2>conftest.err) ++ ac_status=$? ++ cat conftest.err >&5 ++ echo "$as_me:9251: \$? = $ac_status" >&5 ++ if (exit $ac_status) && test -s "$ac_outfile"; then ++ # The compiler can only warn and ignore the option if not recognized ++ # So say no if there are warnings other than the usual output. ++ $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp ++ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 ++ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then ++ lt_cv_prog_compiler_pic_works=yes ++ fi ++ fi ++ $RM conftest* + +-rm -rf conftest.dSYM +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5 +-$as_echo "$ac_cv_func_shl_load" >&6; } +-if test $ac_cv_func_shl_load = yes; then +- lt_cv_dlopen="shl_load" +-else +- { $as_echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5 +-$as_echo_n "checking for shl_load in -ldld... " >&6; } +-if test "${ac_cv_lib_dld_shl_load+set}" = set; then +- $as_echo_n "(cached) " >&6 +-else +- ac_check_lib_save_LIBS=$LIBS +-LIBS="-ldld $LIBS" +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ ++{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works" >&5 ++echo "${ECHO_T}$lt_cv_prog_compiler_pic_works" >&6; } + +-/* Override any GCC internal prototype to avoid an error. +- Use char because int might match the return type of a GCC +- builtin and then its argument prototype would still apply. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-char shl_load (); +-int +-main () +-{ +-return shl_load (); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then +- ac_cv_lib_dld_shl_load=yes ++if test x"$lt_cv_prog_compiler_pic_works" = xyes; then ++ case $lt_prog_compiler_pic in ++ "" | " "*) ;; ++ *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;; ++ esac + else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- ac_cv_lib_dld_shl_load=no ++ lt_prog_compiler_pic= ++ lt_prog_compiler_can_build_shared=no + fi + +-rm -rf conftest.dSYM +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext +-LIBS=$ac_check_lib_save_LIBS + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5 +-$as_echo "$ac_cv_lib_dld_shl_load" >&6; } +-if test $ac_cv_lib_dld_shl_load = yes; then +- lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld" +-else +- { $as_echo "$as_me:$LINENO: checking for dlopen" >&5 +-$as_echo_n "checking for dlopen... " >&6; } +-if test "${ac_cv_func_dlopen+set}" = set; then +- $as_echo_n "(cached) " >&6 +-else +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-/* Define dlopen to an innocuous variant, in case declares dlopen. +- For example, HP-UX 11i declares gettimeofday. */ +-#define dlopen innocuous_dlopen + +-/* System header to define __stub macros and hopefully few prototypes, +- which can conflict with char dlopen (); below. +- Prefer to if __STDC__ is defined, since +- exists even on freestanding compilers. */ + +-#ifdef __STDC__ +-# include +-#else +-# include +-#endif + +-#undef dlopen + +-/* Override any GCC internal prototype to avoid an error. +- Use char because int might match the return type of a GCC +- builtin and then its argument prototype would still apply. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-char dlopen (); +-/* The GNU C library defines this for functions which it implements +- to always fail with ENOSYS. Some functions are actually named +- something starting with __ and the normal name is an alias. */ +-#if defined __stub_dlopen || defined __stub___dlopen +-choke me +-#endif + +-int +-main () +-{ +-return dlopen (); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then +- ac_cv_func_dlopen=yes +-else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 + +- ac_cv_func_dlopen=no +-fi ++# ++# Check to make sure the static flag actually works. ++# ++wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\" ++{ echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 ++echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; } ++if test "${lt_cv_prog_compiler_static_works+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ lt_cv_prog_compiler_static_works=no ++ save_LDFLAGS="$LDFLAGS" ++ LDFLAGS="$LDFLAGS $lt_tmp_static_flag" ++ echo "$lt_simple_link_test_code" > conftest.$ac_ext ++ if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then ++ # The linker can only warn and ignore the option if not recognized ++ # So say no if there are warnings ++ if test -s conftest.err; then ++ # Append any errors to the config.log. ++ cat conftest.err 1>&5 ++ $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp ++ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 ++ if diff conftest.exp conftest.er2 >/dev/null; then ++ lt_cv_prog_compiler_static_works=yes ++ fi ++ else ++ lt_cv_prog_compiler_static_works=yes ++ fi ++ fi ++ $RM -r conftest* ++ LDFLAGS="$save_LDFLAGS" + +-rm -rf conftest.dSYM +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5 +-$as_echo "$ac_cv_func_dlopen" >&6; } +-if test $ac_cv_func_dlopen = yes; then +- lt_cv_dlopen="dlopen" +-else +- { $as_echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 +-$as_echo_n "checking for dlopen in -ldl... " >&6; } +-if test "${ac_cv_lib_dl_dlopen+set}" = set; then +- $as_echo_n "(cached) " >&6 +-else +- ac_check_lib_save_LIBS=$LIBS +-LIBS="-ldl $LIBS" +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ ++{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works" >&5 ++echo "${ECHO_T}$lt_cv_prog_compiler_static_works" >&6; } + +-/* Override any GCC internal prototype to avoid an error. +- Use char because int might match the return type of a GCC +- builtin and then its argument prototype would still apply. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-char dlopen (); +-int +-main () +-{ +-return dlopen (); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then +- ac_cv_lib_dl_dlopen=yes ++if test x"$lt_cv_prog_compiler_static_works" = xyes; then ++ : + else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- ac_cv_lib_dl_dlopen=no ++ lt_prog_compiler_static= + fi + +-rm -rf conftest.dSYM +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext +-LIBS=$ac_check_lib_save_LIBS +-fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 +-$as_echo "$ac_cv_lib_dl_dlopen" >&6; } +-if test $ac_cv_lib_dl_dlopen = yes; then +- lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" +-else +- { $as_echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5 +-$as_echo_n "checking for dlopen in -lsvld... " >&6; } +-if test "${ac_cv_lib_svld_dlopen+set}" = set; then +- $as_echo_n "(cached) " >&6 +-else +- ac_check_lib_save_LIBS=$LIBS +-LIBS="-lsvld $LIBS" +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ + +-/* Override any GCC internal prototype to avoid an error. +- Use char because int might match the return type of a GCC +- builtin and then its argument prototype would still apply. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-char dlopen (); +-int +-main () +-{ +-return dlopen (); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then +- ac_cv_lib_svld_dlopen=yes +-else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 + +- ac_cv_lib_svld_dlopen=no +-fi + +-rm -rf conftest.dSYM +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext +-LIBS=$ac_check_lib_save_LIBS +-fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5 +-$as_echo "$ac_cv_lib_svld_dlopen" >&6; } +-if test $ac_cv_lib_svld_dlopen = yes; then +- lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" +-else +- { $as_echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5 +-$as_echo_n "checking for dld_link in -ldld... " >&6; } +-if test "${ac_cv_lib_dld_dld_link+set}" = set; then +- $as_echo_n "(cached) " >&6 +-else +- ac_check_lib_save_LIBS=$LIBS +-LIBS="-ldld $LIBS" +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ + +-/* Override any GCC internal prototype to avoid an error. +- Use char because int might match the return type of a GCC +- builtin and then its argument prototype would still apply. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-char dld_link (); +-int +-main () +-{ +-return dld_link (); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then +- ac_cv_lib_dld_dld_link=yes +-else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 + +- ac_cv_lib_dld_dld_link=no +-fi + +-rm -rf conftest.dSYM +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext +-LIBS=$ac_check_lib_save_LIBS +-fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5 +-$as_echo "$ac_cv_lib_dld_dld_link" >&6; } +-if test $ac_cv_lib_dld_dld_link = yes; then +- lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld" +-fi ++ { echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 ++echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; } ++if test "${lt_cv_prog_compiler_c_o+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ lt_cv_prog_compiler_c_o=no ++ $RM -r conftest 2>/dev/null ++ mkdir conftest ++ cd conftest ++ mkdir out ++ echo "$lt_simple_compile_test_code" > conftest.$ac_ext + ++ lt_compiler_flag="-o out/conftest2.$ac_objext" ++ # Insert the option either (1) after the last *FLAGS variable, or ++ # (2) before a word containing "conftest.", or (3) at the end. ++ # Note that $ac_compile itself does not contain backslashes and begins ++ # with a dollar sign (not a hyphen), so the echo should work correctly. ++ lt_compile=`echo "$ac_compile" | $SED \ ++ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ ++ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ ++ -e 's:$: $lt_compiler_flag:'` ++ (eval echo "\"\$as_me:9352: $lt_compile\"" >&5) ++ (eval "$lt_compile" 2>out/conftest.err) ++ ac_status=$? ++ cat out/conftest.err >&5 ++ echo "$as_me:9356: \$? = $ac_status" >&5 ++ if (exit $ac_status) && test -s out/conftest2.$ac_objext ++ then ++ # The compiler can only warn and ignore the option if not recognized ++ # So say no if there are warnings ++ $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp ++ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 ++ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then ++ lt_cv_prog_compiler_c_o=yes ++ fi ++ fi ++ chmod u+w . 2>&5 ++ $RM conftest* ++ # SGI C++ compiler will create directory out/ii_files/ for ++ # template instantiation ++ test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files ++ $RM out/* && rmdir out ++ cd .. ++ $RM -r conftest ++ $RM conftest* + + fi ++{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5 ++echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6; } + + +-fi + + +-fi + + +-fi ++ { echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 ++echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; } ++if test "${lt_cv_prog_compiler_c_o+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ lt_cv_prog_compiler_c_o=no ++ $RM -r conftest 2>/dev/null ++ mkdir conftest ++ cd conftest ++ mkdir out ++ echo "$lt_simple_compile_test_code" > conftest.$ac_ext + ++ lt_compiler_flag="-o out/conftest2.$ac_objext" ++ # Insert the option either (1) after the last *FLAGS variable, or ++ # (2) before a word containing "conftest.", or (3) at the end. ++ # Note that $ac_compile itself does not contain backslashes and begins ++ # with a dollar sign (not a hyphen), so the echo should work correctly. ++ lt_compile=`echo "$ac_compile" | $SED \ ++ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ ++ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ ++ -e 's:$: $lt_compiler_flag:'` ++ (eval echo "\"\$as_me:9407: $lt_compile\"" >&5) ++ (eval "$lt_compile" 2>out/conftest.err) ++ ac_status=$? ++ cat out/conftest.err >&5 ++ echo "$as_me:9411: \$? = $ac_status" >&5 ++ if (exit $ac_status) && test -s out/conftest2.$ac_objext ++ then ++ # The compiler can only warn and ignore the option if not recognized ++ # So say no if there are warnings ++ $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp ++ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 ++ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then ++ lt_cv_prog_compiler_c_o=yes ++ fi ++ fi ++ chmod u+w . 2>&5 ++ $RM conftest* ++ # SGI C++ compiler will create directory out/ii_files/ for ++ # template instantiation ++ test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files ++ $RM out/* && rmdir out ++ cd .. ++ $RM -r conftest ++ $RM conftest* + + fi ++{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5 ++echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6; } + +- ;; +- esac + +- if test "x$lt_cv_dlopen" != xno; then +- enable_dlopen=yes +- else +- enable_dlopen=no +- fi + +- case $lt_cv_dlopen in +- dlopen) +- save_CPPFLAGS="$CPPFLAGS" +- test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" + +- save_LDFLAGS="$LDFLAGS" +- wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" ++hard_links="nottested" ++if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then ++ # do not overwrite the value of need_locks provided by the user ++ { echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 ++echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; } ++ hard_links=yes ++ $RM conftest* ++ ln conftest.a conftest.b 2>/dev/null && hard_links=no ++ touch conftest.a ++ ln conftest.a conftest.b 2>&5 || hard_links=no ++ ln conftest.a conftest.b 2>/dev/null && hard_links=no ++ { echo "$as_me:$LINENO: result: $hard_links" >&5 ++echo "${ECHO_T}$hard_links" >&6; } ++ if test "$hard_links" = no; then ++ { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 ++echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} ++ need_locks=warn ++ fi ++else ++ need_locks=no ++fi + +- save_LIBS="$LIBS" +- LIBS="$lt_cv_dlopen_libs $LIBS" + +- { $as_echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5 +-$as_echo_n "checking whether a program can dlopen itself... " >&6; } +-if test "${lt_cv_dlopen_self+set}" = set; then +- $as_echo_n "(cached) " >&6 +-else +- if test "$cross_compiling" = yes; then : +- lt_cv_dlopen_self=cross +-else +- lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 +- lt_status=$lt_dlunknown +- cat > conftest.$ac_ext < +-#endif + +-#include + +-#ifdef RTLD_GLOBAL +-# define LT_DLGLOBAL RTLD_GLOBAL +-#else +-# ifdef DL_GLOBAL +-# define LT_DLGLOBAL DL_GLOBAL +-# else +-# define LT_DLGLOBAL 0 +-# endif +-#endif + +-/* We may have to define LT_DLLAZY_OR_NOW in the command line if we +- find out it does not work in some platform. */ +-#ifndef LT_DLLAZY_OR_NOW +-# ifdef RTLD_LAZY +-# define LT_DLLAZY_OR_NOW RTLD_LAZY +-# else +-# ifdef DL_LAZY +-# define LT_DLLAZY_OR_NOW DL_LAZY +-# else +-# ifdef RTLD_NOW +-# define LT_DLLAZY_OR_NOW RTLD_NOW +-# else +-# ifdef DL_NOW +-# define LT_DLLAZY_OR_NOW DL_NOW +-# else +-# define LT_DLLAZY_OR_NOW 0 +-# endif +-# endif +-# endif +-# endif +-#endif ++ { echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 ++echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; } + +-#ifdef __cplusplus +-extern "C" void exit (int); +-#endif ++ runpath_var= ++ allow_undefined_flag= ++ always_export_symbols=no ++ archive_cmds= ++ archive_expsym_cmds= ++ compiler_needs_object=no ++ enable_shared_with_static_runtimes=no ++ export_dynamic_flag_spec= ++ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' ++ hardcode_automatic=no ++ hardcode_direct=no ++ hardcode_direct_absolute=no ++ hardcode_libdir_flag_spec= ++ hardcode_libdir_flag_spec_ld= ++ hardcode_libdir_separator= ++ hardcode_minus_L=no ++ hardcode_shlibpath_var=unsupported ++ inherit_rpath=no ++ link_all_deplibs=unknown ++ module_cmds= ++ module_expsym_cmds= ++ old_archive_from_new_cmds= ++ old_archive_from_expsyms_cmds= ++ thread_safe_flag_spec= ++ whole_archive_flag_spec= ++ # include_expsyms should be a list of space-separated symbols to be *always* ++ # included in the symbol list ++ include_expsyms= ++ # exclude_expsyms can be an extended regexp of symbols to exclude ++ # it will be wrapped by ` (' and `)$', so one must not match beginning or ++ # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', ++ # as well as any symbol that contains `d'. ++ exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' ++ # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out ++ # platforms (ab)use it in PIC code, but their linkers get confused if ++ # the symbol is explicitly referenced. Since portable code cannot ++ # rely on this symbol name, it's probably fine to never include it in ++ # preloaded symbol tables. ++ # Exclude shared library initialization/finalization symbols. ++ extract_expsyms_cmds= + +-void fnord() { int i=42;} +-int main () +-{ +- void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); +- int status = $lt_dlunknown; ++ case $host_os in ++ cygwin* | mingw* | pw32*) ++ # FIXME: the MSVC++ port hasn't been tested in a loooong time ++ # When not using gcc, we currently assume that we are using ++ # Microsoft Visual C++. ++ if test "$GCC" != yes; then ++ with_gnu_ld=no ++ fi ++ ;; ++ interix*) ++ # we just hope/assume this is gcc and not c89 (= MSVC++) ++ with_gnu_ld=yes ++ ;; ++ openbsd*) ++ with_gnu_ld=no ++ ;; ++ esac + +- if (self) +- { +- if (dlsym (self,"fnord")) status = $lt_dlno_uscore; +- else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; +- /* dlclose (self); */ +- } +- else +- puts (dlerror ()); ++ ld_shlibs=yes ++ if test "$with_gnu_ld" = yes; then ++ # If archive_cmds runs LD, not CC, wlarc should be empty ++ wlarc='${wl}' + +- exit (status); +-} +-EOF +- if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>&5 +- ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then +- (./conftest; exit; ) >&5 2>/dev/null +- lt_status=$? +- case x$lt_status in +- x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; +- x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;; +- x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;; ++ # Set some defaults for GNU ld with shared library support. These ++ # are reset later if shared libraries are not supported. Putting them ++ # here allows them to be overridden if necessary. ++ runpath_var=LD_RUN_PATH ++ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' ++ export_dynamic_flag_spec='${wl}--export-dynamic' ++ # ancient GNU ld didn't support --whole-archive et. al. ++ if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then ++ whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' ++ else ++ whole_archive_flag_spec= ++ fi ++ supports_anon_versioning=no ++ case `$LD -v 2>&1` in ++ *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 ++ *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... ++ *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... ++ *\ 2.11.*) ;; # other 2.11 versions ++ *) supports_anon_versioning=yes ;; + esac +- else : +- # compilation failed +- lt_cv_dlopen_self=no +- fi +-fi +-rm -fr conftest* + ++ # See if GNU ld supports shared libraries. ++ case $host_os in ++ aix[3-9]*) ++ # On AIX/PPC, the GNU linker is very broken ++ if test "$host_cpu" != ia64; then ++ ld_shlibs=no ++ cat <<_LT_EOF 1>&2 + +-fi +-{ $as_echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5 +-$as_echo "$lt_cv_dlopen_self" >&6; } ++*** Warning: the GNU linker, at least up to release 2.9.1, is reported ++*** to be unable to reliably create shared libraries on AIX. ++*** Therefore, libtool is disabling shared libraries support. If you ++*** really care for shared libraries, you may want to modify your PATH ++*** so that a non-GNU linker is found, and then restart. + +- if test "x$lt_cv_dlopen_self" = xyes; then +- wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" +- { $as_echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5 +-$as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; } +-if test "${lt_cv_dlopen_self_static+set}" = set; then +- $as_echo_n "(cached) " >&6 +-else +- if test "$cross_compiling" = yes; then : +- lt_cv_dlopen_self_static=cross +-else +- lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 +- lt_status=$lt_dlunknown +- cat > conftest.$ac_ext < +-#endif ++ amigaos*) ++ case $host_cpu in ++ powerpc) ++ # see comment about AmigaOS4 .so support ++ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ archive_expsym_cmds='' ++ ;; ++ m68k) ++ archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' ++ hardcode_libdir_flag_spec='-L$libdir' ++ hardcode_minus_L=yes ++ ;; ++ esac ++ ;; + +-#include ++ beos*) ++ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then ++ allow_undefined_flag=unsupported ++ # Joseph Beckenbach says some releases of gcc ++ # support --undefined. This deserves some investigation. FIXME ++ archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ else ++ ld_shlibs=no ++ fi ++ ;; + +-#ifdef RTLD_GLOBAL +-# define LT_DLGLOBAL RTLD_GLOBAL +-#else +-# ifdef DL_GLOBAL +-# define LT_DLGLOBAL DL_GLOBAL +-# else +-# define LT_DLGLOBAL 0 +-# endif +-#endif +- +-/* We may have to define LT_DLLAZY_OR_NOW in the command line if we +- find out it does not work in some platform. */ +-#ifndef LT_DLLAZY_OR_NOW +-# ifdef RTLD_LAZY +-# define LT_DLLAZY_OR_NOW RTLD_LAZY +-# else +-# ifdef DL_LAZY +-# define LT_DLLAZY_OR_NOW DL_LAZY +-# else +-# ifdef RTLD_NOW +-# define LT_DLLAZY_OR_NOW RTLD_NOW +-# else +-# ifdef DL_NOW +-# define LT_DLLAZY_OR_NOW DL_NOW +-# else +-# define LT_DLLAZY_OR_NOW 0 +-# endif +-# endif +-# endif +-# endif +-#endif +- +-#ifdef __cplusplus +-extern "C" void exit (int); +-#endif ++ cygwin* | mingw* | pw32*) ++ # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless, ++ # as there is no search path for DLLs. ++ hardcode_libdir_flag_spec='-L$libdir' ++ allow_undefined_flag=unsupported ++ always_export_symbols=no ++ enable_shared_with_static_runtimes=yes ++ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' + +-void fnord() { int i=42;} +-int main () +-{ +- void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); +- int status = $lt_dlunknown; ++ if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then ++ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' ++ # If the export-symbols file already is a .def file (1st line ++ # is EXPORTS), use it as is; otherwise, prepend... ++ archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then ++ cp $export_symbols $output_objdir/$soname.def; ++ else ++ echo EXPORTS > $output_objdir/$soname.def; ++ cat $export_symbols >> $output_objdir/$soname.def; ++ fi~ ++ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' ++ else ++ ld_shlibs=no ++ fi ++ ;; + +- if (self) +- { +- if (dlsym (self,"fnord")) status = $lt_dlno_uscore; +- else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; +- /* dlclose (self); */ +- } +- else +- puts (dlerror ()); ++ interix[3-9]*) ++ hardcode_direct=no ++ hardcode_shlibpath_var=no ++ hardcode_libdir_flag_spec='${wl}-rpath,$libdir' ++ export_dynamic_flag_spec='${wl}-E' ++ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. ++ # Instead, shared libraries are loaded at an image base (0x10000000 by ++ # default) and relocated if they conflict, which is a slow very memory ++ # consuming and fragmenting process. To avoid this, we pick a random, ++ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link ++ # time. Moving up from 0x10000000 also allows more sbrk(2) space. ++ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ++ archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ++ ;; + +- exit (status); +-} +-EOF +- if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>&5 +- ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then +- (./conftest; exit; ) >&5 2>/dev/null +- lt_status=$? +- case x$lt_status in +- x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; +- x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;; +- x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;; +- esac +- else : +- # compilation failed +- lt_cv_dlopen_self_static=no +- fi +-fi +-rm -fr conftest* ++ gnu* | linux* | tpf* | k*bsd*-gnu) ++ tmp_diet=no ++ if test "$host_os" = linux-dietlibc; then ++ case $cc_basename in ++ diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) ++ esac ++ fi ++ if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ ++ && test "$tmp_diet" = no ++ then ++ tmp_addflag= ++ tmp_sharedflag='-shared' ++ case $cc_basename,$host_cpu in ++ pgcc*) # Portland Group C compiler ++ whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' ++ tmp_addflag=' $pic_flag' ++ ;; ++ pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers ++ whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' ++ tmp_addflag=' $pic_flag -Mnomain' ;; ++ ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 ++ tmp_addflag=' -i_dynamic' ;; ++ efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 ++ tmp_addflag=' -i_dynamic -nofor_main' ;; ++ ifc* | ifort*) # Intel Fortran compiler ++ tmp_addflag=' -nofor_main' ;; ++ xl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below) ++ tmp_sharedflag='-qmkshrobj' ++ tmp_addflag= ;; ++ esac ++ case `$CC -V 2>&1 | sed 5q` in ++ *Sun\ C*) # Sun C 5.9 ++ whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' ++ compiler_needs_object=yes ++ tmp_sharedflag='-G' ;; ++ *Sun\ F*) # Sun Fortran 8.3 ++ tmp_sharedflag='-G' ;; ++ esac ++ archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + ++ if test "x$supports_anon_versioning" = xyes; then ++ archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ ++ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ ++ echo "local: *; };" >> $output_objdir/$libname.ver~ ++ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' ++ fi + +-fi +-{ $as_echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5 +-$as_echo "$lt_cv_dlopen_self_static" >&6; } +- fi ++ case $cc_basename in ++ xlf*) ++ # IBM XL Fortran 10.1 on PPC cannot create shared libs itself ++ whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive' ++ hardcode_libdir_flag_spec= ++ hardcode_libdir_flag_spec_ld='-rpath $libdir' ++ archive_cmds='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib' ++ if test "x$supports_anon_versioning" = xyes; then ++ archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ ++ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ ++ echo "local: *; };" >> $output_objdir/$libname.ver~ ++ $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' ++ fi ++ ;; ++ esac ++ else ++ ld_shlibs=no ++ fi ++ ;; + +- CPPFLAGS="$save_CPPFLAGS" +- LDFLAGS="$save_LDFLAGS" +- LIBS="$save_LIBS" +- ;; +- esac ++ netbsd* | netbsdelf*-gnu) ++ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then ++ archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' ++ wlarc= ++ else ++ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ fi ++ ;; + +- case $lt_cv_dlopen_self in +- yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; +- *) enable_dlopen_self=unknown ;; +- esac ++ solaris*) ++ if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then ++ ld_shlibs=no ++ cat <<_LT_EOF 1>&2 + +- case $lt_cv_dlopen_self_static in +- yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; +- *) enable_dlopen_self_static=unknown ;; +- esac +-fi ++*** Warning: The releases 2.8.* of the GNU linker cannot reliably ++*** create shared libraries on Solaris systems. Therefore, libtool ++*** is disabling shared libraries support. We urge you to upgrade GNU ++*** binutils to release 2.9.1 or newer. Another option is to modify ++*** your PATH or compiler configuration so that the native linker is ++*** used, and then restart. + ++_LT_EOF ++ elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then ++ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ else ++ ld_shlibs=no ++ fi ++ ;; + +-# Report which library types will actually be built +-{ $as_echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5 +-$as_echo_n "checking if libtool supports shared libraries... " >&6; } +-{ $as_echo "$as_me:$LINENO: result: $can_build_shared" >&5 +-$as_echo "$can_build_shared" >&6; } +- +-{ $as_echo "$as_me:$LINENO: checking whether to build shared libraries" >&5 +-$as_echo_n "checking whether to build shared libraries... " >&6; } +-test "$can_build_shared" = "no" && enable_shared=no ++ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) ++ case `$LD -v 2>&1` in ++ *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) ++ ld_shlibs=no ++ cat <<_LT_EOF 1>&2 + +-# On AIX, shared libraries and static libraries use the same namespace, and +-# are all built from PIC. +-case $host_os in +-aix3*) +- test "$enable_shared" = yes && enable_static=no +- if test -n "$RANLIB"; then +- archive_cmds="$archive_cmds~\$RANLIB \$lib" +- postinstall_cmds='$RANLIB $lib' +- fi +- ;; ++*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not ++*** reliably create shared libraries on SCO systems. Therefore, libtool ++*** is disabling shared libraries support. We urge you to upgrade GNU ++*** binutils to release 2.16.91.0.3 or newer. Another option is to modify ++*** your PATH or compiler configuration so that the native linker is ++*** used, and then restart. + +-aix[4-9]*) +- if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then +- test "$enable_shared" = yes && enable_static=no +- fi +- ;; +-esac +-{ $as_echo "$as_me:$LINENO: result: $enable_shared" >&5 +-$as_echo "$enable_shared" >&6; } ++_LT_EOF ++ ;; ++ *) ++ # For security reasons, it is highly recommended that you always ++ # use absolute paths for naming shared libraries, and exclude the ++ # DT_RUNPATH tag from executables and libraries. But doing so ++ # requires that you compile everything twice, which is a pain. ++ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then ++ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' ++ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ else ++ ld_shlibs=no ++ fi ++ ;; ++ esac ++ ;; + +-{ $as_echo "$as_me:$LINENO: checking whether to build static libraries" >&5 +-$as_echo_n "checking whether to build static libraries... " >&6; } +-# Make sure either enable_shared or enable_static is yes. +-test "$enable_shared" = yes || enable_static=yes +-{ $as_echo "$as_me:$LINENO: result: $enable_static" >&5 +-$as_echo "$enable_static" >&6; } +- +-# The else clause should only fire when bootstrapping the +-# libtool distribution, otherwise you forgot to ship ltmain.sh +-# with your package, and you will get complaints that there are +-# no rules to generate ltmain.sh. +-if test -f "$ltmain"; then +- # See if we are running on zsh, and set the options which allow our commands through +- # without removal of \ escapes. +- if test -n "${ZSH_VERSION+set}" ; then +- setopt NO_GLOB_SUBST +- fi +- # Now quote all the things that may contain metacharacters while being +- # careful not to overquote the AC_SUBSTed values. We take copies of the +- # variables and quote the copies for generation of the libtool script. +- for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \ +- SED SHELL STRIP \ +- libname_spec library_names_spec soname_spec extract_expsyms_cmds \ +- old_striplib striplib file_magic_cmd finish_cmds finish_eval \ +- deplibs_check_method reload_flag reload_cmds need_locks \ +- lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ +- lt_cv_sys_global_symbol_to_c_name_address \ +- sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ +- old_postinstall_cmds old_postuninstall_cmds \ +- compiler \ +- CC \ +- LD \ +- lt_prog_compiler_wl \ +- lt_prog_compiler_pic \ +- lt_prog_compiler_static \ +- lt_prog_compiler_no_builtin_flag \ +- export_dynamic_flag_spec \ +- thread_safe_flag_spec \ +- whole_archive_flag_spec \ +- enable_shared_with_static_runtimes \ +- old_archive_cmds \ +- old_archive_from_new_cmds \ +- predep_objects \ +- postdep_objects \ +- predeps \ +- postdeps \ +- compiler_lib_search_path \ +- compiler_lib_search_dirs \ +- archive_cmds \ +- archive_expsym_cmds \ +- postinstall_cmds \ +- postuninstall_cmds \ +- old_archive_from_expsyms_cmds \ +- allow_undefined_flag \ +- no_undefined_flag \ +- export_symbols_cmds \ +- hardcode_libdir_flag_spec \ +- hardcode_libdir_flag_spec_ld \ +- hardcode_libdir_separator \ +- hardcode_automatic \ +- module_cmds \ +- module_expsym_cmds \ +- lt_cv_prog_compiler_c_o \ +- fix_srcfile_path \ +- exclude_expsyms \ +- include_expsyms; do +- +- case $var in +- old_archive_cmds | \ +- old_archive_from_new_cmds | \ +- archive_cmds | \ +- archive_expsym_cmds | \ +- module_cmds | \ +- module_expsym_cmds | \ +- old_archive_from_expsyms_cmds | \ +- export_symbols_cmds | \ +- extract_expsyms_cmds | reload_cmds | finish_cmds | \ +- postinstall_cmds | postuninstall_cmds | \ +- old_postinstall_cmds | old_postuninstall_cmds | \ +- sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) +- # Double-quote double-evaled strings. +- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" ++ sunos4*) ++ archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' ++ wlarc= ++ hardcode_direct=yes ++ hardcode_shlibpath_var=no + ;; ++ + *) +- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" ++ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then ++ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ else ++ ld_shlibs=no ++ fi + ;; + esac +- done +- +- case $lt_echo in +- *'\$0 --fallback-echo"') +- lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` +- ;; +- esac + +-cfgfile="${ofile}T" +- trap "$rm \"$cfgfile\"; exit 1" 1 2 15 +- $rm -f "$cfgfile" +- { $as_echo "$as_me:$LINENO: creating $ofile" >&5 +-$as_echo "$as_me: creating $ofile" >&6;} ++ if test "$ld_shlibs" = no; then ++ runpath_var= ++ hardcode_libdir_flag_spec= ++ export_dynamic_flag_spec= ++ whole_archive_flag_spec= ++ fi ++ else ++ # PORTME fill in a description of your system's linker (not GNU ld) ++ case $host_os in ++ aix3*) ++ allow_undefined_flag=unsupported ++ always_export_symbols=yes ++ archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' ++ # Note: this linker hardcodes the directories in LIBPATH if there ++ # are no directories specified by -L. ++ hardcode_minus_L=yes ++ if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then ++ # Neither direct hardcoding nor static linking is supported with a ++ # broken collect2. ++ hardcode_direct=unsupported ++ fi ++ ;; + +- cat <<__EOF__ >> "$cfgfile" +-#! $SHELL ++ aix[4-9]*) ++ if test "$host_cpu" = ia64; then ++ # On IA64, the linker does run time linking by default, so we don't ++ # have to do anything special. ++ aix_use_runtimelinking=no ++ exp_sym_flag='-Bexport' ++ no_entry_flag="" ++ else ++ # If we're using GNU nm, then we don't want the "-C" option. ++ # -C means demangle to AIX nm, but means don't demangle with GNU nm ++ if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then ++ export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' ++ else ++ export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' ++ fi ++ aix_use_runtimelinking=no + +-# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services. +-# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP) +-# NOTE: Changes made to this file will be lost: look at ltmain.sh. +-# +-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 +-# Free Software Foundation, Inc. +-# +-# This file is part of GNU Libtool: +-# Originally by Gordon Matzigkeit , 1996 +-# +-# This program is free software; you can redistribute it and/or modify +-# it under the terms of the GNU General Public License as published by +-# the Free Software Foundation; either version 2 of the License, or +-# (at your option) any later version. +-# +-# This program is distributed in the hope that it will be useful, but +-# WITHOUT ANY WARRANTY; without even the implied warranty of +-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +-# General Public License for more details. +-# +-# You should have received a copy of the GNU General Public License +-# along with this program; if not, write to the Free Software +-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. +-# +-# As a special exception to the GNU General Public License, if you +-# distribute this file as part of a program that contains a +-# configuration script generated by Autoconf, you may include it under +-# the same distribution terms that you use for the rest of that program. +- +-# A sed program that does not truncate output. +-SED=$lt_SED +- +-# Sed that helps us avoid accidentally triggering echo(1) options like -n. +-Xsed="$SED -e 1s/^X//" ++ # Test if we are trying to use run time linking or normal ++ # AIX style linking. If -brtl is somewhere in LDFLAGS, we ++ # need to do runtime linking. ++ case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) ++ for ld_flag in $LDFLAGS; do ++ if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then ++ aix_use_runtimelinking=yes ++ break ++ fi ++ done ++ ;; ++ esac + +-# The HP-UX ksh and POSIX shell print the target directory to stdout +-# if CDPATH is set. +-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH ++ exp_sym_flag='-bexport' ++ no_entry_flag='-bnoentry' ++ fi + +-# The names of the tagged configurations supported by this script. +-available_tags= ++ # When large executables or shared objects are built, AIX ld can ++ # have problems creating the table of contents. If linking a library ++ # or program results in "error TOC overflow" add -mminimal-toc to ++ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not ++ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + +-# ### BEGIN LIBTOOL CONFIG ++ archive_cmds='' ++ hardcode_direct=yes ++ hardcode_direct_absolute=yes ++ hardcode_libdir_separator=':' ++ link_all_deplibs=yes ++ file_list_spec='${wl}-f,' + +-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: ++ if test "$GCC" = yes; then ++ case $host_os in aix4.[012]|aix4.[012].*) ++ # We only want to do this on AIX 4.2 and lower, the check ++ # below for broken collect2 doesn't work under 4.3+ ++ collect2name=`${CC} -print-prog-name=collect2` ++ if test -f "$collect2name" && ++ strings "$collect2name" | $GREP resolve_lib_name >/dev/null ++ then ++ # We have reworked collect2 ++ : ++ else ++ # We have old collect2 ++ hardcode_direct=unsupported ++ # It fails to find uninstalled libraries when the uninstalled ++ # path is not listed in the libpath. Setting hardcode_minus_L ++ # to unsupported forces relinking ++ hardcode_minus_L=yes ++ hardcode_libdir_flag_spec='-L$libdir' ++ hardcode_libdir_separator= ++ fi ++ ;; ++ esac ++ shared_flag='-shared' ++ if test "$aix_use_runtimelinking" = yes; then ++ shared_flag="$shared_flag "'${wl}-G' ++ fi ++ link_all_deplibs=no ++ else ++ # not using gcc ++ if test "$host_cpu" = ia64; then ++ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release ++ # chokes on -Wl,-G. The following line is correct: ++ shared_flag='-G' ++ else ++ if test "$aix_use_runtimelinking" = yes; then ++ shared_flag='${wl}-G' ++ else ++ shared_flag='${wl}-bM:SRE' ++ fi ++ fi ++ fi + +-# Shell to use when invoking shell scripts. +-SHELL=$lt_SHELL ++ # It seems that -bexpall does not export symbols beginning with ++ # underscore (_), so it is better to generate a list of symbols to export. ++ always_export_symbols=yes ++ if test "$aix_use_runtimelinking" = yes; then ++ # Warning - without using the other runtime loading flags (-brtl), ++ # -berok will link without error, but may produce a broken library. ++ allow_undefined_flag='-berok' ++ # Determine the default libpath from the value encoded in an ++ # empty executable. ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ + +-# Whether or not to build shared libraries. +-build_libtool_libs=$enable_shared ++int ++main () ++{ + +-# Whether or not to build static libraries. +-build_old_libs=$enable_static ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + +-# Whether or not to add -lc for building shared libraries. +-build_libtool_need_lc=$archive_cmds_need_lc ++lt_aix_libpath_sed=' ++ /Import File Strings/,/^$/ { ++ /^0/ { ++ s/^0 *\(.*\)$/\1/ ++ p ++ } ++ }' ++aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` ++# Check for a 64-bit object if we didn't find anything. ++if test -z "$aix_libpath"; then ++ aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` ++fi ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 + +-# Whether or not to disallow shared libs when runtime libs are static +-allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes + +-# Whether or not to optimize for fast installation. +-fast_install=$enable_fast_install ++fi + +-# The host system. +-host_alias=$host_alias +-host=$host +-host_os=$host_os ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + +-# The build system. +-build_alias=$build_alias +-build=$build +-build_os=$build_os ++ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" ++ archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" ++ else ++ if test "$host_cpu" = ia64; then ++ hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' ++ allow_undefined_flag="-z nodefs" ++ archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" ++ else ++ # Determine the default libpath from the value encoded in an ++ # empty executable. ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ + +-# An echo program that does not interpret backslashes. +-echo=$lt_echo ++int ++main () ++{ + +-# The archiver. +-AR=$lt_AR +-AR_FLAGS=$lt_AR_FLAGS ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + +-# A C compiler. +-LTCC=$lt_LTCC ++lt_aix_libpath_sed=' ++ /Import File Strings/,/^$/ { ++ /^0/ { ++ s/^0 *\(.*\)$/\1/ ++ p ++ } ++ }' ++aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` ++# Check for a 64-bit object if we didn't find anything. ++if test -z "$aix_libpath"; then ++ aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` ++fi ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 + +-# LTCC compiler flags. +-LTCFLAGS=$lt_LTCFLAGS + +-# A language-specific compiler. +-CC=$lt_compiler ++fi + +-# Is the compiler the GNU C compiler? +-with_gcc=$GCC ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + +-# An ERE matcher. +-EGREP=$lt_EGREP ++ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" ++ # Warning - without using the other run time loading flags, ++ # -berok will link without error, but may produce a broken library. ++ no_undefined_flag=' ${wl}-bernotok' ++ allow_undefined_flag=' ${wl}-berok' ++ # Exported symbols can be pulled into shared objects from archives ++ whole_archive_flag_spec='$convenience' ++ archive_cmds_need_lc=yes ++ # This is similar to how AIX traditionally builds its shared libraries. ++ archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' ++ fi ++ fi ++ ;; + +-# The linker used to build libraries. +-LD=$lt_LD ++ amigaos*) ++ case $host_cpu in ++ powerpc) ++ # see comment about AmigaOS4 .so support ++ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ archive_expsym_cmds='' ++ ;; ++ m68k) ++ archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' ++ hardcode_libdir_flag_spec='-L$libdir' ++ hardcode_minus_L=yes ++ ;; ++ esac ++ ;; + +-# Whether we need hard or soft links. +-LN_S=$lt_LN_S ++ bsdi[45]*) ++ export_dynamic_flag_spec=-rdynamic ++ ;; + +-# A BSD-compatible nm program. +-NM=$lt_NM ++ cygwin* | mingw* | pw32*) ++ # When not using gcc, we currently assume that we are using ++ # Microsoft Visual C++. ++ # hardcode_libdir_flag_spec is actually meaningless, as there is ++ # no search path for DLLs. ++ hardcode_libdir_flag_spec=' ' ++ allow_undefined_flag=unsupported ++ # Tell ltmain to make .lib files, not .a files. ++ libext=lib ++ # Tell ltmain to make .dll files, not .so files. ++ shrext_cmds=".dll" ++ # FIXME: Setting linknames here is a bad hack. ++ archive_cmds='$CC -o $lib $libobjs $compiler_flags `$ECHO "X$deplibs" | $Xsed -e '\''s/ -lc$//'\''` -link -dll~linknames=' ++ # The linker will automatically build a .lib file if we build a DLL. ++ old_archive_from_new_cmds='true' ++ # FIXME: Should let the user specify the lib program. ++ old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs' ++ fix_srcfile_path='`cygpath -w "$srcfile"`' ++ enable_shared_with_static_runtimes=yes ++ ;; + +-# A symbol stripping program +-STRIP=$lt_STRIP ++ darwin* | rhapsody*) + +-# Used to examine libraries when file_magic_cmd begins "file" +-MAGIC_CMD=$MAGIC_CMD + +-# Used on cygwin: DLL creation program. +-DLLTOOL="$DLLTOOL" ++ archive_cmds_need_lc=no ++ hardcode_direct=no ++ hardcode_automatic=yes ++ hardcode_shlibpath_var=unsupported ++ whole_archive_flag_spec='' ++ link_all_deplibs=yes ++ allow_undefined_flag="$_lt_dar_allow_undefined" ++ if test "$GCC" = "yes"; then ++ output_verbose_link_cmd=echo ++ archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" ++ module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" ++ archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" ++ module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" + +-# Used on cygwin: object dumper. +-OBJDUMP="$OBJDUMP" ++ else ++ ld_shlibs=no ++ fi + +-# Used on cygwin: assembler. +-AS="$AS" ++ ;; + +-# The name of the directory that contains temporary libtool files. +-objdir=$objdir +- +-# How to create reloadable object files. +-reload_flag=$lt_reload_flag +-reload_cmds=$lt_reload_cmds +- +-# How to pass a linker flag through the compiler. +-wl=$lt_lt_prog_compiler_wl +- +-# Object file suffix (normally "o"). +-objext="$ac_objext" +- +-# Old archive suffix (normally "a"). +-libext="$libext" ++ dgux*) ++ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_libdir_flag_spec='-L$libdir' ++ hardcode_shlibpath_var=no ++ ;; + +-# Shared library suffix (normally ".so"). +-shrext_cmds='$shrext_cmds' ++ freebsd1*) ++ ld_shlibs=no ++ ;; + +-# Executable file suffix (normally ""). +-exeext="$exeext" ++ # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor ++ # support. Future versions do this automatically, but an explicit c++rt0.o ++ # does not break anything, and helps significantly (at the cost of a little ++ # extra space). ++ freebsd2.2*) ++ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' ++ hardcode_libdir_flag_spec='-R$libdir' ++ hardcode_direct=yes ++ hardcode_shlibpath_var=no ++ ;; + +-# Additional compiler flags for building library objects. +-pic_flag=$lt_lt_prog_compiler_pic +-pic_mode=$pic_mode ++ # Unfortunately, older versions of FreeBSD 2 do not have this feature. ++ freebsd2*) ++ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_direct=yes ++ hardcode_minus_L=yes ++ hardcode_shlibpath_var=no ++ ;; + +-# What is the maximum length of a command? +-max_cmd_len=$lt_cv_sys_max_cmd_len ++ # FreeBSD 3 and greater uses gcc -shared to do shared libraries. ++ freebsd* | dragonfly*) ++ archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' ++ hardcode_libdir_flag_spec='-R$libdir' ++ hardcode_direct=yes ++ hardcode_shlibpath_var=no ++ ;; + +-# Does compiler simultaneously support -c and -o options? +-compiler_c_o=$lt_lt_cv_prog_compiler_c_o ++ hpux9*) ++ if test "$GCC" = yes; then ++ archive_cmds='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ++ else ++ archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ++ fi ++ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' ++ hardcode_libdir_separator=: ++ hardcode_direct=yes + +-# Must we lock files when doing compilation? +-need_locks=$lt_need_locks ++ # hardcode_minus_L: Not really in the search PATH, ++ # but as the default location of the library. ++ hardcode_minus_L=yes ++ export_dynamic_flag_spec='${wl}-E' ++ ;; + +-# Do we need the lib prefix for modules? +-need_lib_prefix=$need_lib_prefix ++ hpux10*) ++ if test "$GCC" = yes -a "$with_gnu_ld" = no; then ++ archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ++ else ++ archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' ++ fi ++ if test "$with_gnu_ld" = no; then ++ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' ++ hardcode_libdir_flag_spec_ld='+b $libdir' ++ hardcode_libdir_separator=: ++ hardcode_direct=yes ++ hardcode_direct_absolute=yes ++ export_dynamic_flag_spec='${wl}-E' ++ # hardcode_minus_L: Not really in the search PATH, ++ # but as the default location of the library. ++ hardcode_minus_L=yes ++ fi ++ ;; + +-# Do we need a version for libraries? +-need_version=$need_version ++ hpux11*) ++ if test "$GCC" = yes -a "$with_gnu_ld" = no; then ++ case $host_cpu in ++ hppa*64*) ++ archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ ia64*) ++ archive_cmds='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ *) ++ archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ esac ++ else ++ case $host_cpu in ++ hppa*64*) ++ archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ ia64*) ++ archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ *) ++ archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ esac ++ fi ++ if test "$with_gnu_ld" = no; then ++ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' ++ hardcode_libdir_separator=: + +-# Whether dlopen is supported. +-dlopen_support=$enable_dlopen ++ case $host_cpu in ++ hppa*64*|ia64*) ++ hardcode_direct=no ++ hardcode_shlibpath_var=no ++ ;; ++ *) ++ hardcode_direct=yes ++ hardcode_direct_absolute=yes ++ export_dynamic_flag_spec='${wl}-E' + +-# Whether dlopen of programs is supported. +-dlopen_self=$enable_dlopen_self ++ # hardcode_minus_L: Not really in the search PATH, ++ # but as the default location of the library. ++ hardcode_minus_L=yes ++ ;; ++ esac ++ fi ++ ;; + +-# Whether dlopen of statically linked programs is supported. +-dlopen_self_static=$enable_dlopen_self_static ++ irix5* | irix6* | nonstopux*) ++ if test "$GCC" = yes; then ++ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ # Try to use the -exported_symbol ld option, if it does not ++ # work, assume that -exports_file does not work either and ++ # implicitly export all symbols. ++ save_LDFLAGS="$LDFLAGS" ++ LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" ++ cat >conftest.$ac_ext <<_ACEOF ++int foo(void) {} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' + +-# Compiler flag to prevent dynamic linking. +-link_static_flag=$lt_lt_prog_compiler_static ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 + +-# Compiler flag to turn off builtin functions. +-no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag + +-# Compiler flag to allow reflexive dlopens. +-export_dynamic_flag_spec=$lt_export_dynamic_flag_spec ++fi + +-# Compiler flag to generate shared objects directly from archives. +-whole_archive_flag_spec=$lt_whole_archive_flag_spec ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++ LDFLAGS="$save_LDFLAGS" ++ else ++ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' ++ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' ++ fi ++ archive_cmds_need_lc='no' ++ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' ++ hardcode_libdir_separator=: ++ inherit_rpath=yes ++ link_all_deplibs=yes ++ ;; + +-# Compiler flag to generate thread-safe objects. +-thread_safe_flag_spec=$lt_thread_safe_flag_spec ++ netbsd* | netbsdelf*-gnu) ++ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then ++ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out ++ else ++ archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF ++ fi ++ hardcode_libdir_flag_spec='-R$libdir' ++ hardcode_direct=yes ++ hardcode_shlibpath_var=no ++ ;; + +-# Library versioning type. +-version_type=$version_type ++ newsos6) ++ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_direct=yes ++ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' ++ hardcode_libdir_separator=: ++ hardcode_shlibpath_var=no ++ ;; + +-# Format of library name prefix. +-libname_spec=$lt_libname_spec ++ *nto* | *qnx*) ++ ;; + +-# List of archive names. First name is the real one, the rest are links. +-# The last name is the one that the linker finds with -lNAME. +-library_names_spec=$lt_library_names_spec ++ openbsd*) ++ if test -f /usr/libexec/ld.so; then ++ hardcode_direct=yes ++ hardcode_shlibpath_var=no ++ hardcode_direct_absolute=yes ++ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then ++ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' ++ hardcode_libdir_flag_spec='${wl}-rpath,$libdir' ++ export_dynamic_flag_spec='${wl}-E' ++ else ++ case $host_os in ++ openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) ++ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_libdir_flag_spec='-R$libdir' ++ ;; ++ *) ++ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' ++ hardcode_libdir_flag_spec='${wl}-rpath,$libdir' ++ ;; ++ esac ++ fi ++ else ++ ld_shlibs=no ++ fi ++ ;; + +-# The coded name of the library, if different from the real name. +-soname_spec=$lt_soname_spec ++ os2*) ++ hardcode_libdir_flag_spec='-L$libdir' ++ hardcode_minus_L=yes ++ allow_undefined_flag=unsupported ++ archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$ECHO DATA >> $output_objdir/$libname.def~$ECHO " SINGLE NONSHARED" >> $output_objdir/$libname.def~$ECHO EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' ++ old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' ++ ;; + +-# Commands used to build and install an old-style archive. +-RANLIB=$lt_RANLIB +-old_archive_cmds=$lt_old_archive_cmds +-old_postinstall_cmds=$lt_old_postinstall_cmds +-old_postuninstall_cmds=$lt_old_postuninstall_cmds ++ osf3*) ++ if test "$GCC" = yes; then ++ allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' ++ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ else ++ allow_undefined_flag=' -expect_unresolved \*' ++ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' ++ fi ++ archive_cmds_need_lc='no' ++ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' ++ hardcode_libdir_separator=: ++ ;; + +-# Create an old-style archive from a shared archive. +-old_archive_from_new_cmds=$lt_old_archive_from_new_cmds ++ osf4* | osf5*) # as osf3* with the addition of -msym flag ++ if test "$GCC" = yes; then ++ allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' ++ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' ++ else ++ allow_undefined_flag=' -expect_unresolved \*' ++ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' ++ archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ ++ $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp' + +-# Create a temporary old-style archive to link instead of a shared archive. +-old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds ++ # Both c and cxx compiler support -rpath directly ++ hardcode_libdir_flag_spec='-rpath $libdir' ++ fi ++ archive_cmds_need_lc='no' ++ hardcode_libdir_separator=: ++ ;; + +-# Commands used to build and install a shared archive. +-archive_cmds=$lt_archive_cmds +-archive_expsym_cmds=$lt_archive_expsym_cmds +-postinstall_cmds=$lt_postinstall_cmds +-postuninstall_cmds=$lt_postuninstall_cmds ++ solaris*) ++ no_undefined_flag=' -z defs' ++ if test "$GCC" = yes; then ++ wlarc='${wl}' ++ archive_cmds='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ ++ $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' ++ else ++ case `$CC -V 2>&1` in ++ *"Compilers 5.0"*) ++ wlarc='' ++ archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ ++ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' ++ ;; ++ *) ++ wlarc='${wl}' ++ archive_cmds='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ ++ $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' ++ ;; ++ esac ++ fi ++ hardcode_libdir_flag_spec='-R$libdir' ++ hardcode_shlibpath_var=no ++ case $host_os in ++ solaris2.[0-5] | solaris2.[0-5].*) ;; ++ *) ++ # The compiler driver will combine and reorder linker options, ++ # but understands `-z linker_flag'. GCC discards it without `$wl', ++ # but is careful enough not to reorder. ++ # Supported since Solaris 2.6 (maybe 2.5.1?) ++ if test "$GCC" = yes; then ++ whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' ++ else ++ whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ++ fi ++ ;; ++ esac ++ link_all_deplibs=yes ++ ;; + +-# Commands used to build a loadable module (assumed same as above if empty) +-module_cmds=$lt_module_cmds +-module_expsym_cmds=$lt_module_expsym_cmds ++ sunos4*) ++ if test "x$host_vendor" = xsequent; then ++ # Use $CC to link under sequent, because it throws in some extra .o ++ # files that make .init and .fini sections work. ++ archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' ++ else ++ archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' ++ fi ++ hardcode_libdir_flag_spec='-L$libdir' ++ hardcode_direct=yes ++ hardcode_minus_L=yes ++ hardcode_shlibpath_var=no ++ ;; + +-# Commands to strip libraries. +-old_striplib=$lt_old_striplib +-striplib=$lt_striplib ++ sysv4) ++ case $host_vendor in ++ sni) ++ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_direct=yes # is this really true??? ++ ;; ++ siemens) ++ ## LD is ld it makes a PLAMLIB ++ ## CC just makes a GrossModule. ++ archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' ++ reload_cmds='$CC -r -o $output$reload_objs' ++ hardcode_direct=no ++ ;; ++ motorola) ++ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_direct=no #Motorola manual says yes, but my tests say they lie ++ ;; ++ esac ++ runpath_var='LD_RUN_PATH' ++ hardcode_shlibpath_var=no ++ ;; + +-# Dependencies to place before the objects being linked to create a +-# shared library. +-predep_objects=$lt_predep_objects +- +-# Dependencies to place after the objects being linked to create a +-# shared library. +-postdep_objects=$lt_postdep_objects +- +-# Dependencies to place before the objects being linked to create a +-# shared library. +-predeps=$lt_predeps +- +-# Dependencies to place after the objects being linked to create a +-# shared library. +-postdeps=$lt_postdeps +- +-# The directories searched by this compiler when creating a shared +-# library +-compiler_lib_search_dirs=$lt_compiler_lib_search_dirs +- +-# The library search path used internally by the compiler when linking +-# a shared library. +-compiler_lib_search_path=$lt_compiler_lib_search_path ++ sysv4.3*) ++ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_shlibpath_var=no ++ export_dynamic_flag_spec='-Bexport' ++ ;; + +-# Method to check whether dependent libraries are shared objects. +-deplibs_check_method=$lt_deplibs_check_method ++ sysv4*MP*) ++ if test -d /usr/nec; then ++ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_shlibpath_var=no ++ runpath_var=LD_RUN_PATH ++ hardcode_runpath_var=yes ++ ld_shlibs=yes ++ fi ++ ;; + +-# Command to use when deplibs_check_method == file_magic. +-file_magic_cmd=$lt_file_magic_cmd ++ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) ++ no_undefined_flag='${wl}-z,text' ++ archive_cmds_need_lc=no ++ hardcode_shlibpath_var=no ++ runpath_var='LD_RUN_PATH' + +-# Flag that allows shared libraries with undefined symbols to be built. +-allow_undefined_flag=$lt_allow_undefined_flag ++ if test "$GCC" = yes; then ++ archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ else ++ archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ fi ++ ;; + +-# Flag that forces no undefined symbols. +-no_undefined_flag=$lt_no_undefined_flag ++ sysv5* | sco3.2v5* | sco5v6*) ++ # Note: We can NOT use -z defs as we might desire, because we do not ++ # link with -lc, and that would cause any symbols used from libc to ++ # always be unresolved, which means just about no library would ++ # ever link correctly. If we're not using GNU ld we use -z text ++ # though, which does catch some bad symbols but isn't as heavy-handed ++ # as -z defs. ++ no_undefined_flag='${wl}-z,text' ++ allow_undefined_flag='${wl}-z,nodefs' ++ archive_cmds_need_lc=no ++ hardcode_shlibpath_var=no ++ hardcode_libdir_flag_spec='${wl}-R,$libdir' ++ hardcode_libdir_separator=':' ++ link_all_deplibs=yes ++ export_dynamic_flag_spec='${wl}-Bexport' ++ runpath_var='LD_RUN_PATH' + +-# Commands used to finish a libtool library installation in a directory. +-finish_cmds=$lt_finish_cmds ++ if test "$GCC" = yes; then ++ archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ else ++ archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ fi ++ ;; + +-# Same as above, but a single script fragment to be evaled but not shown. +-finish_eval=$lt_finish_eval ++ uts4*) ++ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_libdir_flag_spec='-L$libdir' ++ hardcode_shlibpath_var=no ++ ;; + +-# Take the output of nm and produce a listing of raw symbols and C names. +-global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe ++ *) ++ ld_shlibs=no ++ ;; ++ esac + +-# Transform the output of nm in a proper C declaration +-global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl ++ if test x$host_vendor = xsni; then ++ case $host in ++ sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) ++ export_dynamic_flag_spec='${wl}-Blargedynsym' ++ ;; ++ esac ++ fi ++ fi + +-# Transform the output of nm in a C name address pair +-global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address ++{ echo "$as_me:$LINENO: result: $ld_shlibs" >&5 ++echo "${ECHO_T}$ld_shlibs" >&6; } ++test "$ld_shlibs" = no && can_build_shared=no + +-# This is the shared library runtime path variable. +-runpath_var=$runpath_var ++with_gnu_ld=$with_gnu_ld + +-# This is the shared library path variable. +-shlibpath_var=$shlibpath_var + +-# Is shlibpath searched before the hard-coded library search path? +-shlibpath_overrides_runpath=$shlibpath_overrides_runpath + +-# How to hardcode a shared library path into an executable. +-hardcode_action=$hardcode_action + +-# Whether we should hardcode library paths into libraries. +-hardcode_into_libs=$hardcode_into_libs + +-# Flag to hardcode \$libdir into a binary during linking. +-# This must work even if \$libdir does not exist. +-hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec + +-# If ld is used when linking, flag to hardcode \$libdir into +-# a binary during linking. This must work even if \$libdir does +-# not exist. +-hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld + +-# Whether we need a single -rpath flag with a separated argument. +-hardcode_libdir_separator=$lt_hardcode_libdir_separator + +-# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the +-# resulting binary. +-hardcode_direct=$hardcode_direct + +-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the +-# resulting binary. +-hardcode_minus_L=$hardcode_minus_L + +-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into +-# the resulting binary. +-hardcode_shlibpath_var=$hardcode_shlibpath_var + +-# Set to yes if building a shared library automatically hardcodes DIR into the library +-# and all subsequent libraries and executables linked against it. +-hardcode_automatic=$hardcode_automatic + +-# Variables whose values should be saved in libtool wrapper scripts and +-# restored at relink time. +-variables_saved_for_relink="$variables_saved_for_relink" + +-# Whether libtool must link a program against all its dependency libraries. +-link_all_deplibs=$link_all_deplibs + +-# Compile-time system search path for libraries +-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec + +-# Run-time system search path for libraries +-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec ++# ++# Do we need to explicitly link libc? ++# ++case "x$archive_cmds_need_lc" in ++x|xyes) ++ # Assume -lc should be added ++ archive_cmds_need_lc=yes + +-# Fix the shell variable \$srcfile for the compiler. +-fix_srcfile_path=$lt_fix_srcfile_path ++ if test "$enable_shared" = yes && test "$GCC" = yes; then ++ case $archive_cmds in ++ *'~'*) ++ # FIXME: we may have to deal with multi-command sequences. ++ ;; ++ '$CC '*) ++ # Test whether the compiler implicitly links with -lc since on some ++ # systems, -lgcc has to come before -lc. If gcc already passes -lc ++ # to ld, don't add -lc before -lgcc. ++ { echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 ++echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; } ++ $RM conftest* ++ echo "$lt_simple_compile_test_code" > conftest.$ac_ext + +-# Set to yes if exported symbols are required. +-always_export_symbols=$always_export_symbols ++ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ++ (eval $ac_compile) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } 2>conftest.err; then ++ soname=conftest ++ lib=conftest ++ libobjs=conftest.$ac_objext ++ deplibs= ++ wl=$lt_prog_compiler_wl ++ pic_flag=$lt_prog_compiler_pic ++ compiler_flags=-v ++ linker_flags=-v ++ verstring= ++ output_objdir=. ++ libname=conftest ++ lt_save_allow_undefined_flag=$allow_undefined_flag ++ allow_undefined_flag= ++ if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\"") >&5 ++ (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } ++ then ++ archive_cmds_need_lc=no ++ else ++ archive_cmds_need_lc=yes ++ fi ++ allow_undefined_flag=$lt_save_allow_undefined_flag ++ else ++ cat conftest.err 1>&5 ++ fi ++ $RM conftest* ++ { echo "$as_me:$LINENO: result: $archive_cmds_need_lc" >&5 ++echo "${ECHO_T}$archive_cmds_need_lc" >&6; } ++ ;; ++ esac ++ fi ++ ;; ++esac + +-# The commands to list exported symbols. +-export_symbols_cmds=$lt_export_symbols_cmds + +-# The commands to extract the exported symbol list from a shared archive. +-extract_expsyms_cmds=$lt_extract_expsyms_cmds + +-# Symbols that should not be listed in the preloaded symbols. +-exclude_expsyms=$lt_exclude_expsyms + +-# Symbols that must always be exported. +-include_expsyms=$lt_include_expsyms + +-# ### END LIBTOOL CONFIG + +-__EOF__ + + +- case $host_os in +- aix3*) +- cat <<\EOF >> "$cfgfile" + +-# AIX sometimes has problems with the GCC collect2 program. For some +-# reason, if we set the COLLECT_NAMES environment variable, the problems +-# vanish in a puff of smoke. +-if test "X${COLLECT_NAMES+set}" != Xset; then +- COLLECT_NAMES= +- export COLLECT_NAMES +-fi +-EOF +- ;; +- esac + +- # We use sed instead of cat because bash on DJGPP gets confused if +- # if finds mixed CR/LF and LF-only lines. Since sed operates in +- # text mode, it properly converts lines to CR/LF. This bash problem +- # is reportedly fixed, but why not run on old versions too? +- sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1) + +- mv -f "$cfgfile" "$ofile" || \ +- (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") +- chmod +x "$ofile" + +-else +- # If there is no Makefile yet, we rely on a make rule to execute +- # `config.status --recheck' to rerun these tests and create the +- # libtool script then. +- ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` +- if test -f "$ltmain_in"; then +- test -f Makefile && make "$ltmain" +- fi +-fi + + +-ac_ext=c +-ac_cpp='$CPP $CPPFLAGS' +-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +-ac_compiler_gnu=$ac_cv_c_compiler_gnu + +-CC="$lt_save_CC" + + +-# Check whether --with-tags was given. +-if test "${with_tags+set}" = set; then +- withval=$with_tags; tagnames="$withval" +-fi + + +-if test -f "$ltmain" && test -n "$tagnames"; then +- if test ! -f "${ofile}"; then +- { $as_echo "$as_me:$LINENO: WARNING: output file \`$ofile' does not exist" >&5 +-$as_echo "$as_me: WARNING: output file \`$ofile' does not exist" >&2;} +- fi + +- if test -z "$LTCC"; then +- eval "`$SHELL ${ofile} --config | grep '^LTCC='`" +- if test -z "$LTCC"; then +- { $as_echo "$as_me:$LINENO: WARNING: output file \`$ofile' does not look like a libtool script" >&5 +-$as_echo "$as_me: WARNING: output file \`$ofile' does not look like a libtool script" >&2;} +- else +- { $as_echo "$as_me:$LINENO: WARNING: using \`LTCC=$LTCC', extracted from \`$ofile'" >&5 +-$as_echo "$as_me: WARNING: using \`LTCC=$LTCC', extracted from \`$ofile'" >&2;} +- fi +- fi +- if test -z "$LTCFLAGS"; then +- eval "`$SHELL ${ofile} --config | grep '^LTCFLAGS='`" +- fi + +- # Extract list of available tagged configurations in $ofile. +- # Note that this assumes the entire list is on one line. +- available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'` + +- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," +- for tagname in $tagnames; do +- IFS="$lt_save_ifs" +- # Check whether tagname contains only valid characters +- case `$echo "X$tagname" | $Xsed -e 's:[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]::g'` in +- "") ;; +- *) { { $as_echo "$as_me:$LINENO: error: invalid tag name: $tagname" >&5 +-$as_echo "$as_me: error: invalid tag name: $tagname" >&2;} +- { (exit 1); exit 1; }; } +- ;; +- esac + +- if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null +- then +- { { $as_echo "$as_me:$LINENO: error: tag name \"$tagname\" already exists" >&5 +-$as_echo "$as_me: error: tag name \"$tagname\" already exists" >&2;} +- { (exit 1); exit 1; }; } +- fi + +- # Update the list of available tags. +- if test -n "$tagname"; then +- echo appending configuration tag \"$tagname\" to $ofile +- +- case $tagname in +- CXX) +- if test -n "$CXX" && ( test "X$CXX" != "Xno" && +- ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || +- (test "X$CXX" != "Xg++"))) ; then +- ac_ext=cpp +-ac_cpp='$CXXCPP $CPPFLAGS' +-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' +-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu + + + + +-archive_cmds_need_lc_CXX=no +-allow_undefined_flag_CXX= +-always_export_symbols_CXX=no +-archive_expsym_cmds_CXX= +-export_dynamic_flag_spec_CXX= +-hardcode_direct_CXX=no +-hardcode_libdir_flag_spec_CXX= +-hardcode_libdir_flag_spec_ld_CXX= +-hardcode_libdir_separator_CXX= +-hardcode_minus_L_CXX=no +-hardcode_shlibpath_var_CXX=unsupported +-hardcode_automatic_CXX=no +-module_cmds_CXX= +-module_expsym_cmds_CXX= +-link_all_deplibs_CXX=unknown +-old_archive_cmds_CXX=$old_archive_cmds +-no_undefined_flag_CXX= +-whole_archive_flag_spec_CXX= +-enable_shared_with_static_runtimes_CXX=no +- +-# Dependencies to place before and after the object being linked: +-predep_objects_CXX= +-postdep_objects_CXX= +-predeps_CXX= +-postdeps_CXX= +-compiler_lib_search_path_CXX= +-compiler_lib_search_dirs_CXX= + +-# Source file extension for C++ test sources. +-ac_ext=cpp + +-# Object file extension for compiled C++ test sources. +-objext=o +-objext_CXX=$objext + +-# Code to be used in simple compile tests +-lt_simple_compile_test_code="int some_variable = 0;" + +-# Code to be used in simple link tests +-lt_simple_link_test_code='int main(int, char *[]) { return(0); }' + +-# ltmain only uses $CC for tagged configurations so make sure $CC is set. + +-# If no C compiler was specified, use CC. +-LTCC=${LTCC-"$CC"} + +-# If no C compiler flags were specified, use CFLAGS. +-LTCFLAGS=${LTCFLAGS-"$CFLAGS"} + +-# Allow CC to be a program name with arguments. +-compiler=$CC + + +-# save warnings/boilerplate of simple test code +-ac_outfile=conftest.$ac_objext +-echo "$lt_simple_compile_test_code" >conftest.$ac_ext +-eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +-_lt_compiler_boilerplate=`cat conftest.err` +-$rm conftest* + +-ac_outfile=conftest.$ac_objext +-echo "$lt_simple_link_test_code" >conftest.$ac_ext +-eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +-_lt_linker_boilerplate=`cat conftest.err` +-$rm -r conftest* + + +-# Allow CC to be a program name with arguments. +-lt_save_CC=$CC +-lt_save_LD=$LD +-lt_save_GCC=$GCC +-GCC=$GXX +-lt_save_with_gnu_ld=$with_gnu_ld +-lt_save_path_LD=$lt_cv_path_LD +-if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then +- lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx +-else +- $as_unset lt_cv_prog_gnu_ld +-fi +-if test -n "${lt_cv_path_LDCXX+set}"; then +- lt_cv_path_LD=$lt_cv_path_LDCXX +-else +- $as_unset lt_cv_path_LD +-fi +-test -z "${LDCXX+set}" || LD=$LDCXX +-CC=${CXX-"c++"} +-compiler=$CC +-compiler_CXX=$CC +-for cc_temp in $compiler""; do +- case $cc_temp in +- compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; +- distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; +- \-*) ;; +- *) break;; +- esac +-done +-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` + + +-# We don't want -fno-exception wen compiling C++ code, so set the +-# no_builtin_flag separately +-if test "$GXX" = yes; then +- lt_prog_compiler_no_builtin_flag_CXX=' -fno-builtin' +-else +- lt_prog_compiler_no_builtin_flag_CXX= +-fi + +-if test "$GXX" = yes; then +- # Set up default GNU C++ configuration + + +-# Check whether --with-gnu-ld was given. +-if test "${with_gnu_ld+set}" = set; then +- withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes +-else +- with_gnu_ld=no +-fi + +-ac_prog=ld +-if test "$GCC" = yes; then +- # Check if gcc -print-prog-name=ld gives a path. +- { $as_echo "$as_me:$LINENO: checking for ld used by $CC" >&5 +-$as_echo_n "checking for ld used by $CC... " >&6; } +- case $host in +- *-*-mingw*) +- # gcc leaves a trailing carriage return which upsets mingw +- ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; +- *) +- ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; +- esac +- case $ac_prog in +- # Accept absolute paths. +- [\\/]* | ?:[\\/]*) +- re_direlt='/[^/][^/]*/\.\./' +- # Canonicalize the pathname of ld +- ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'` +- while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do +- ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"` +- done +- test -z "$LD" && LD="$ac_prog" +- ;; +- "") +- # If it fails, then pretend we aren't using GCC. +- ac_prog=ld +- ;; +- *) +- # If it is relative, then search for the first ld in PATH. +- with_gnu_ld=unknown +- ;; +- esac +-elif test "$with_gnu_ld" = yes; then +- { $as_echo "$as_me:$LINENO: checking for GNU ld" >&5 +-$as_echo_n "checking for GNU ld... " >&6; } +-else +- { $as_echo "$as_me:$LINENO: checking for non-GNU ld" >&5 +-$as_echo_n "checking for non-GNU ld... " >&6; } +-fi +-if test "${lt_cv_path_LD+set}" = set; then +- $as_echo_n "(cached) " >&6 +-else +- if test -z "$LD"; then +- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR +- for ac_dir in $PATH; do +- IFS="$lt_save_ifs" +- test -z "$ac_dir" && ac_dir=. +- if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then +- lt_cv_path_LD="$ac_dir/$ac_prog" +- # Check to see if the program is GNU ld. I'd rather use --version, +- # but apparently some variants of GNU ld only accept -v. +- # Break only if it was the GNU/non-GNU ld that we prefer. +- case `"$lt_cv_path_LD" -v 2>&1 &5 +-$as_echo "$LD" >&6; } +-else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } +-fi +-test -z "$LD" && { { $as_echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5 +-$as_echo "$as_me: error: no acceptable ld found in \$PATH" >&2;} +- { (exit 1); exit 1; }; } +-{ $as_echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5 +-$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; } +-if test "${lt_cv_prog_gnu_ld+set}" = set; then +- $as_echo_n "(cached) " >&6 +-else +- # I'd rather use --version here, but apparently some GNU lds only accept -v. +-case `$LD -v 2>&1 &5 +-$as_echo "$lt_cv_prog_gnu_ld" >&6; } +-with_gnu_ld=$lt_cv_prog_gnu_ld + + + +- # Check if GNU C++ uses GNU ld as the underlying linker, since the +- # archiving commands below assume that GNU ld is being used. +- if test "$with_gnu_ld" = yes; then +- archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' +- archive_expsym_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + +- hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir' +- export_dynamic_flag_spec_CXX='${wl}--export-dynamic' + +- # If archive_cmds runs LD, not CC, wlarc should be empty +- # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to +- # investigate it a little bit more. (MM) +- wlarc='${wl}' + +- # ancient GNU ld didn't support --whole-archive et. al. +- if eval "`$CC -print-prog-name=ld` --help 2>&1" | \ +- grep 'no-whole-archive' > /dev/null; then +- whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' +- else +- whole_archive_flag_spec_CXX= +- fi +- else +- with_gnu_ld=no +- wlarc= + +- # A generic and very simple default shared library creation +- # command for GNU C++ for the case where it uses the native +- # linker, instead of GNU ld. If possible, this setting should +- # overridden to take advantage of the native linker features on +- # the platform it is being used on. +- archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' +- fi + +- # Commands to make compiler produce verbose output that lists +- # what "hidden" libraries, object files and flags are used when +- # linking a shared library. +- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' + +-else +- GXX=no +- with_gnu_ld=no +- wlarc= +-fi + +-# PORTME: fill in a description of your system's C++ link characteristics +-{ $as_echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 +-$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } +-ld_shlibs_CXX=yes +-case $host_os in +- aix3*) +- # FIXME: insert proper C++ library support +- ld_shlibs_CXX=no +- ;; +- aix[4-9]*) +- if test "$host_cpu" = ia64; then +- # On IA64, the linker does run time linking by default, so we don't +- # have to do anything special. +- aix_use_runtimelinking=no +- exp_sym_flag='-Bexport' +- no_entry_flag="" +- else +- aix_use_runtimelinking=no + +- # Test if we are trying to use run time linking or normal +- # AIX style linking. If -brtl is somewhere in LDFLAGS, we +- # need to do runtime linking. +- case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) +- for ld_flag in $LDFLAGS; do +- case $ld_flag in +- *-brtl*) +- aix_use_runtimelinking=yes +- break +- ;; +- esac +- done +- ;; +- esac + +- exp_sym_flag='-bexport' +- no_entry_flag='-bnoentry' +- fi + +- # When large executables or shared objects are built, AIX ld can +- # have problems creating the table of contents. If linking a library +- # or program results in "error TOC overflow" add -mminimal-toc to +- # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not +- # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. +- +- archive_cmds_CXX='' +- hardcode_direct_CXX=yes +- hardcode_libdir_separator_CXX=':' +- link_all_deplibs_CXX=yes +- +- if test "$GXX" = yes; then +- case $host_os in aix4.[012]|aix4.[012].*) +- # We only want to do this on AIX 4.2 and lower, the check +- # below for broken collect2 doesn't work under 4.3+ +- collect2name=`${CC} -print-prog-name=collect2` +- if test -f "$collect2name" && \ +- strings "$collect2name" | grep resolve_lib_name >/dev/null +- then +- # We have reworked collect2 +- : +- else +- # We have old collect2 +- hardcode_direct_CXX=unsupported +- # It fails to find uninstalled libraries when the uninstalled +- # path is not listed in the libpath. Setting hardcode_minus_L +- # to unsupported forces relinking +- hardcode_minus_L_CXX=yes +- hardcode_libdir_flag_spec_CXX='-L$libdir' +- hardcode_libdir_separator_CXX= +- fi +- ;; +- esac +- shared_flag='-shared' +- if test "$aix_use_runtimelinking" = yes; then +- shared_flag="$shared_flag "'${wl}-G' +- fi +- else +- # not using gcc +- if test "$host_cpu" = ia64; then +- # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release +- # chokes on -Wl,-G. The following line is correct: +- shared_flag='-G' +- else +- if test "$aix_use_runtimelinking" = yes; then +- shared_flag='${wl}-G' +- else +- shared_flag='${wl}-bM:SRE' +- fi +- fi +- fi + +- # It seems that -bexpall does not export symbols beginning with +- # underscore (_), so it is better to generate a list of symbols to export. +- always_export_symbols_CXX=yes +- if test "$aix_use_runtimelinking" = yes; then +- # Warning - without using the other runtime loading flags (-brtl), +- # -berok will link without error, but may produce a broken library. +- allow_undefined_flag_CXX='-berok' +- # Determine the default libpath from the value encoded in an empty executable. +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ + +-int +-main () +-{ + +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_cxx_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then + +-lt_aix_libpath_sed=' +- /Import File Strings/,/^$/ { +- /^0/ { +- s/^0 *\(.*\)$/\1/ +- p +- } +- }' +-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +-# Check for a 64-bit object if we didn't find anything. +-if test -z "$aix_libpath"; then +- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +-fi +-else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 + + +-fi + +-rm -rf conftest.dSYM +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext +-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + +- hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath" + +- archive_expsym_cmds_CXX="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" +- else +- if test "$host_cpu" = ia64; then +- hardcode_libdir_flag_spec_CXX='${wl}-R $libdir:/usr/lib:/lib' +- allow_undefined_flag_CXX="-z nodefs" +- archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" +- else +- # Determine the default libpath from the value encoded in an empty executable. +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ + +-int +-main () +-{ + +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_cxx_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then + +-lt_aix_libpath_sed=' +- /Import File Strings/,/^$/ { +- /^0/ { +- s/^0 *\(.*\)$/\1/ +- p +- } +- }' +-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +-# Check for a 64-bit object if we didn't find anything. +-if test -z "$aix_libpath"; then +- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +-fi +-else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 + + +-fi + +-rm -rf conftest.dSYM +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext +-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + +- hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath" +- # Warning - without using the other run time loading flags, +- # -berok will link without error, but may produce a broken library. +- no_undefined_flag_CXX=' ${wl}-bernotok' +- allow_undefined_flag_CXX=' ${wl}-berok' +- # Exported symbols can be pulled into shared objects from archives +- whole_archive_flag_spec_CXX='$convenience' +- archive_cmds_need_lc_CXX=yes +- # This is similar to how AIX traditionally builds its shared libraries. +- archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' +- fi +- fi +- ;; + +- beos*) +- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then +- allow_undefined_flag_CXX=unsupported +- # Joseph Beckenbach says some releases of gcc +- # support --undefined. This deserves some investigation. FIXME +- archive_cmds_CXX='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- else +- ld_shlibs_CXX=no +- fi +- ;; + +- chorus*) +- case $cc_basename in +- *) +- # FIXME: insert proper C++ library support +- ld_shlibs_CXX=no +- ;; +- esac +- ;; + +- cygwin* | mingw* | pw32*) +- # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, CXX) is actually meaningless, +- # as there is no search path for DLLs. +- hardcode_libdir_flag_spec_CXX='-L$libdir' +- allow_undefined_flag_CXX=unsupported +- always_export_symbols_CXX=no +- enable_shared_with_static_runtimes_CXX=yes +- +- if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then +- archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' +- # If the export-symbols file already is a .def file (1st line +- # is EXPORTS), use it as is; otherwise, prepend... +- archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then +- cp $export_symbols $output_objdir/$soname.def; +- else +- echo EXPORTS > $output_objdir/$soname.def; +- cat $export_symbols >> $output_objdir/$soname.def; +- fi~ +- $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' +- else +- ld_shlibs_CXX=no +- fi +- ;; +- darwin* | rhapsody*) +- archive_cmds_need_lc_CXX=no +- hardcode_direct_CXX=no +- hardcode_automatic_CXX=yes +- hardcode_shlibpath_var_CXX=unsupported +- whole_archive_flag_spec_CXX='' +- link_all_deplibs_CXX=yes +- allow_undefined_flag_CXX="$_lt_dar_allow_undefined" +- if test "$GXX" = yes ; then +- output_verbose_link_cmd='echo' +- archive_cmds_CXX="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" +- module_cmds_CXX="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" +- archive_expsym_cmds_CXX="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" +- module_expsym_cmds_CXX="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" +- if test "$lt_cv_apple_cc_single_mod" != "yes"; then +- archive_cmds_CXX="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}" +- archive_expsym_cmds_CXX="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}" +- fi +- else +- case $cc_basename in +- xlc*) +- output_verbose_link_cmd='echo' +- archive_cmds_CXX='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring' +- module_cmds_CXX='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' +- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds +- archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' +- module_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' +- ;; +- *) +- ld_shlibs_CXX=no +- ;; +- esac +- fi +- ;; + +- dgux*) +- case $cc_basename in +- ec++*) +- # FIXME: insert proper C++ library support +- ld_shlibs_CXX=no +- ;; +- ghcx*) +- # Green Hills C++ Compiler +- # FIXME: insert proper C++ library support +- ld_shlibs_CXX=no +- ;; +- *) +- # FIXME: insert proper C++ library support +- ld_shlibs_CXX=no +- ;; +- esac +- ;; +- freebsd[12]*) +- # C++ shared libraries reported to be fairly broken before switch to ELF +- ld_shlibs_CXX=no +- ;; +- freebsd-elf*) +- archive_cmds_need_lc_CXX=no +- ;; +- freebsd* | dragonfly*) +- # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF +- # conventions +- ld_shlibs_CXX=yes +- ;; +- gnu*) +- ;; +- hpux9*) +- hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir' +- hardcode_libdir_separator_CXX=: +- export_dynamic_flag_spec_CXX='${wl}-E' +- hardcode_direct_CXX=yes +- hardcode_minus_L_CXX=yes # Not in the search PATH, +- # but as the default +- # location of the library. +- +- case $cc_basename in +- CC*) +- # FIXME: insert proper C++ library support +- ld_shlibs_CXX=no +- ;; +- aCC*) +- archive_cmds_CXX='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' +- # Commands to make compiler produce verbose output that lists +- # what "hidden" libraries, object files and flags are used when +- # linking a shared library. +- # +- # There doesn't appear to be a way to prevent this compiler from +- # explicitly linking system object files so we need to strip them +- # from the output so that they don't get included in the library +- # dependencies. +- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[-]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' +- ;; +- *) +- if test "$GXX" = yes; then +- archive_cmds_CXX='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' +- else +- # FIXME: insert proper C++ library support +- ld_shlibs_CXX=no +- fi +- ;; +- esac +- ;; +- hpux10*|hpux11*) +- if test $with_gnu_ld = no; then +- hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir' +- hardcode_libdir_separator_CXX=: + +- case $host_cpu in +- hppa*64*|ia64*) ;; +- *) +- export_dynamic_flag_spec_CXX='${wl}-E' +- ;; +- esac +- fi +- case $host_cpu in +- hppa*64*|ia64*) +- hardcode_direct_CXX=no +- hardcode_shlibpath_var_CXX=no +- ;; +- *) +- hardcode_direct_CXX=yes +- hardcode_minus_L_CXX=yes # Not in the search PATH, +- # but as the default +- # location of the library. +- ;; +- esac + +- case $cc_basename in +- CC*) +- # FIXME: insert proper C++ library support +- ld_shlibs_CXX=no +- ;; +- aCC*) +- case $host_cpu in +- hppa*64*) +- archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' +- ;; +- ia64*) +- archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' +- ;; +- *) +- archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' +- ;; +- esac +- # Commands to make compiler produce verbose output that lists +- # what "hidden" libraries, object files and flags are used when +- # linking a shared library. +- # +- # There doesn't appear to be a way to prevent this compiler from +- # explicitly linking system object files so we need to strip them +- # from the output so that they don't get included in the library +- # dependencies. +- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' +- ;; +- *) +- if test "$GXX" = yes; then +- if test $with_gnu_ld = no; then +- case $host_cpu in +- hppa*64*) +- archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' +- ;; +- ia64*) +- archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' +- ;; +- *) +- archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' +- ;; +- esac +- fi +- else +- # FIXME: insert proper C++ library support +- ld_shlibs_CXX=no +- fi +- ;; +- esac +- ;; +- interix[3-9]*) +- hardcode_direct_CXX=no +- hardcode_shlibpath_var_CXX=no +- hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' +- export_dynamic_flag_spec_CXX='${wl}-E' +- # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. +- # Instead, shared libraries are loaded at an image base (0x10000000 by +- # default) and relocated if they conflict, which is a slow very memory +- # consuming and fragmenting process. To avoid this, we pick a random, +- # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link +- # time. Moving up from 0x10000000 also allows more sbrk(2) space. +- archive_cmds_CXX='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' +- archive_expsym_cmds_CXX='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' +- ;; +- irix5* | irix6*) +- case $cc_basename in +- CC*) +- # SGI C++ +- archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' +- +- # Archives containing C++ object files must be created using +- # "CC -ar", where "CC" is the IRIX C++ compiler. This is +- # necessary to make sure instantiated templates are included +- # in the archive. +- old_archive_cmds_CXX='$CC -ar -WR,-u -o $oldlib $oldobjs' +- ;; +- *) +- if test "$GXX" = yes; then +- if test "$with_gnu_ld" = no; then +- archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' +- else +- archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib' +- fi +- fi +- link_all_deplibs_CXX=yes +- ;; +- esac +- hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' +- hardcode_libdir_separator_CXX=: +- ;; +- linux* | k*bsd*-gnu) +- case $cc_basename in +- KCC*) +- # Kuck and Associates, Inc. (KAI) C++ Compiler +- +- # KCC will only create a shared library if the output file +- # ends with ".so" (or ".sl" for HP-UX), so rename the library +- # to its proper name (with version) after linking. +- archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' +- archive_expsym_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' +- # Commands to make compiler produce verbose output that lists +- # what "hidden" libraries, object files and flags are used when +- # linking a shared library. +- # +- # There doesn't appear to be a way to prevent this compiler from +- # explicitly linking system object files so we need to strip them +- # from the output so that they don't get included in the library +- # dependencies. +- output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' +- +- hardcode_libdir_flag_spec_CXX='${wl}--rpath,$libdir' +- export_dynamic_flag_spec_CXX='${wl}--export-dynamic' +- +- # Archives containing C++ object files must be created using +- # "CC -Bstatic", where "CC" is the KAI C++ compiler. +- old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs' +- ;; +- icpc*) +- # Intel C++ +- with_gnu_ld=yes +- # version 8.0 and above of icpc choke on multiply defined symbols +- # if we add $predep_objects and $postdep_objects, however 7.1 and +- # earlier do not add the objects themselves. +- case `$CC -V 2>&1` in +- *"Version 7."*) +- archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' +- archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' +- ;; +- *) # Version 8.0 or newer +- tmp_idyn= +- case $host_cpu in +- ia64*) tmp_idyn=' -i_dynamic';; +- esac +- archive_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- archive_expsym_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' +- ;; +- esac +- archive_cmds_need_lc_CXX=no +- hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' +- export_dynamic_flag_spec_CXX='${wl}--export-dynamic' +- whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive' +- ;; +- pgCC* | pgcpp*) +- # Portland Group C++ compiler +- archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' +- archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' +- +- hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir' +- export_dynamic_flag_spec_CXX='${wl}--export-dynamic' +- whole_archive_flag_spec_CXX='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' +- ;; +- cxx*) +- # Compaq C++ +- archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' +- archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' + +- runpath_var=LD_RUN_PATH +- hardcode_libdir_flag_spec_CXX='-rpath $libdir' +- hardcode_libdir_separator_CXX=: + +- # Commands to make compiler produce verbose output that lists +- # what "hidden" libraries, object files and flags are used when +- # linking a shared library. +- # +- # There doesn't appear to be a way to prevent this compiler from +- # explicitly linking system object files so we need to strip them +- # from the output so that they don't get included in the library +- # dependencies. +- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' +- ;; +- *) +- case `$CC -V 2>&1 | sed 5q` in +- *Sun\ C*) +- # Sun C++ 5.9 +- no_undefined_flag_CXX=' -zdefs' +- archive_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' +- archive_expsym_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols' +- hardcode_libdir_flag_spec_CXX='-R$libdir' +- whole_archive_flag_spec_CXX='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' +- +- # Not sure whether something based on +- # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 +- # would be better. +- output_verbose_link_cmd='echo' +- +- # Archives containing C++ object files must be created using +- # "CC -xar", where "CC" is the Sun C++ compiler. This is +- # necessary to make sure instantiated templates are included +- # in the archive. +- old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs' +- ;; +- esac +- ;; +- esac +- ;; +- lynxos*) +- # FIXME: insert proper C++ library support +- ld_shlibs_CXX=no +- ;; +- m88k*) +- # FIXME: insert proper C++ library support +- ld_shlibs_CXX=no +- ;; +- mvs*) +- case $cc_basename in +- cxx*) +- # FIXME: insert proper C++ library support +- ld_shlibs_CXX=no +- ;; +- *) +- # FIXME: insert proper C++ library support +- ld_shlibs_CXX=no +- ;; +- esac +- ;; +- netbsd*) +- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then +- archive_cmds_CXX='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' +- wlarc= +- hardcode_libdir_flag_spec_CXX='-R$libdir' +- hardcode_direct_CXX=yes +- hardcode_shlibpath_var_CXX=no +- fi +- # Workaround some broken pre-1.5 toolchains +- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' +- ;; +- openbsd2*) +- # C++ shared libraries are fairly broken +- ld_shlibs_CXX=no +- ;; +- openbsd*) +- if test -f /usr/libexec/ld.so; then +- hardcode_direct_CXX=yes +- hardcode_shlibpath_var_CXX=no +- archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' +- hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' +- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then +- archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib' +- export_dynamic_flag_spec_CXX='${wl}-E' +- whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' +- fi +- output_verbose_link_cmd='echo' +- else +- ld_shlibs_CXX=no +- fi +- ;; +- osf3*) +- case $cc_basename in +- KCC*) +- # Kuck and Associates, Inc. (KAI) C++ Compiler +- +- # KCC will only create a shared library if the output file +- # ends with ".so" (or ".sl" for HP-UX), so rename the library +- # to its proper name (with version) after linking. +- archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' +- +- hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' +- hardcode_libdir_separator_CXX=: +- +- # Archives containing C++ object files must be created using +- # "CC -Bstatic", where "CC" is the KAI C++ compiler. +- old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs' + +- ;; +- RCC*) +- # Rational C++ 2.4.1 +- # FIXME: insert proper C++ library support +- ld_shlibs_CXX=no +- ;; +- cxx*) +- allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*' +- archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' +- +- hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' +- hardcode_libdir_separator_CXX=: +- +- # Commands to make compiler produce verbose output that lists +- # what "hidden" libraries, object files and flags are used when +- # linking a shared library. +- # +- # There doesn't appear to be a way to prevent this compiler from +- # explicitly linking system object files so we need to strip them +- # from the output so that they don't get included in the library +- # dependencies. +- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' +- ;; +- *) +- if test "$GXX" = yes && test "$with_gnu_ld" = no; then +- allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*' +- archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' +- +- hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' +- hardcode_libdir_separator_CXX=: +- +- # Commands to make compiler produce verbose output that lists +- # what "hidden" libraries, object files and flags are used when +- # linking a shared library. +- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' + +- else +- # FIXME: insert proper C++ library support +- ld_shlibs_CXX=no +- fi +- ;; +- esac +- ;; +- osf4* | osf5*) +- case $cc_basename in +- KCC*) +- # Kuck and Associates, Inc. (KAI) C++ Compiler +- +- # KCC will only create a shared library if the output file +- # ends with ".so" (or ".sl" for HP-UX), so rename the library +- # to its proper name (with version) after linking. +- archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' +- +- hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' +- hardcode_libdir_separator_CXX=: +- +- # Archives containing C++ object files must be created using +- # the KAI C++ compiler. +- old_archive_cmds_CXX='$CC -o $oldlib $oldobjs' +- ;; +- RCC*) +- # Rational C++ 2.4.1 +- # FIXME: insert proper C++ library support +- ld_shlibs_CXX=no +- ;; +- cxx*) +- allow_undefined_flag_CXX=' -expect_unresolved \*' +- archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' +- archive_expsym_cmds_CXX='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ +- echo "-hidden">> $lib.exp~ +- $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~ +- $rm $lib.exp' +- +- hardcode_libdir_flag_spec_CXX='-rpath $libdir' +- hardcode_libdir_separator_CXX=: +- +- # Commands to make compiler produce verbose output that lists +- # what "hidden" libraries, object files and flags are used when +- # linking a shared library. +- # +- # There doesn't appear to be a way to prevent this compiler from +- # explicitly linking system object files so we need to strip them +- # from the output so that they don't get included in the library +- # dependencies. +- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' +- ;; +- *) +- if test "$GXX" = yes && test "$with_gnu_ld" = no; then +- allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*' +- archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' +- +- hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' +- hardcode_libdir_separator_CXX=: +- +- # Commands to make compiler produce verbose output that lists +- # what "hidden" libraries, object files and flags are used when +- # linking a shared library. +- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' + +- else +- # FIXME: insert proper C++ library support +- ld_shlibs_CXX=no +- fi +- ;; +- esac +- ;; +- psos*) +- # FIXME: insert proper C++ library support +- ld_shlibs_CXX=no +- ;; +- sunos4*) +- case $cc_basename in +- CC*) +- # Sun C++ 4.x +- # FIXME: insert proper C++ library support +- ld_shlibs_CXX=no +- ;; +- lcc*) +- # Lucid +- # FIXME: insert proper C++ library support +- ld_shlibs_CXX=no +- ;; +- *) +- # FIXME: insert proper C++ library support +- ld_shlibs_CXX=no +- ;; +- esac +- ;; +- solaris*) +- case $cc_basename in +- CC*) +- # Sun C++ 4.2, 5.x and Centerline C++ +- archive_cmds_need_lc_CXX=yes +- no_undefined_flag_CXX=' -zdefs' +- archive_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' +- archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ +- $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' +- +- hardcode_libdir_flag_spec_CXX='-R$libdir' +- hardcode_shlibpath_var_CXX=no +- case $host_os in +- solaris2.[0-5] | solaris2.[0-5].*) ;; +- *) +- # The compiler driver will combine and reorder linker options, +- # but understands `-z linker_flag'. +- # Supported since Solaris 2.6 (maybe 2.5.1?) +- whole_archive_flag_spec_CXX='-z allextract$convenience -z defaultextract' +- ;; +- esac +- link_all_deplibs_CXX=yes + +- output_verbose_link_cmd='echo' + +- # Archives containing C++ object files must be created using +- # "CC -xar", where "CC" is the Sun C++ compiler. This is +- # necessary to make sure instantiated templates are included +- # in the archive. +- old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs' +- ;; +- gcx*) +- # Green Hills C++ Compiler +- archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' + +- # The C++ compiler must be used to create the archive. +- old_archive_cmds_CXX='$CC $LDFLAGS -archive -o $oldlib $oldobjs' +- ;; +- *) +- # GNU C++ compiler with Solaris linker +- if test "$GXX" = yes && test "$with_gnu_ld" = no; then +- no_undefined_flag_CXX=' ${wl}-z ${wl}defs' +- if $CC --version | grep -v '^2\.7' > /dev/null; then +- archive_cmds_CXX='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' +- archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ +- $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' +- +- # Commands to make compiler produce verbose output that lists +- # what "hidden" libraries, object files and flags are used when +- # linking a shared library. +- output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\"" +- else +- # g++ 2.7 appears to require `-G' NOT `-shared' on this +- # platform. +- archive_cmds_CXX='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' +- archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ +- $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' +- +- # Commands to make compiler produce verbose output that lists +- # what "hidden" libraries, object files and flags are used when +- # linking a shared library. +- output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\"" +- fi + +- hardcode_libdir_flag_spec_CXX='${wl}-R $wl$libdir' +- case $host_os in +- solaris2.[0-5] | solaris2.[0-5].*) ;; +- *) +- whole_archive_flag_spec_CXX='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' +- ;; +- esac +- fi +- ;; +- esac +- ;; +- sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) +- no_undefined_flag_CXX='${wl}-z,text' +- archive_cmds_need_lc_CXX=no +- hardcode_shlibpath_var_CXX=no +- runpath_var='LD_RUN_PATH' +- +- case $cc_basename in +- CC*) +- archive_cmds_CXX='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' +- archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' +- ;; +- *) +- archive_cmds_CXX='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' +- archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' +- ;; +- esac +- ;; +- sysv5* | sco3.2v5* | sco5v6*) +- # Note: We can NOT use -z defs as we might desire, because we do not +- # link with -lc, and that would cause any symbols used from libc to +- # always be unresolved, which means just about no library would +- # ever link correctly. If we're not using GNU ld we use -z text +- # though, which does catch some bad symbols but isn't as heavy-handed +- # as -z defs. +- # For security reasons, it is highly recommended that you always +- # use absolute paths for naming shared libraries, and exclude the +- # DT_RUNPATH tag from executables and libraries. But doing so +- # requires that you compile everything twice, which is a pain. +- # So that behaviour is only enabled if SCOABSPATH is set to a +- # non-empty value in the environment. Most likely only useful for +- # creating official distributions of packages. +- # This is a hack until libtool officially supports absolute path +- # names for shared libraries. +- no_undefined_flag_CXX='${wl}-z,text' +- allow_undefined_flag_CXX='${wl}-z,nodefs' +- archive_cmds_need_lc_CXX=no +- hardcode_shlibpath_var_CXX=no +- hardcode_libdir_flag_spec_CXX='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' +- hardcode_libdir_separator_CXX=':' +- link_all_deplibs_CXX=yes +- export_dynamic_flag_spec_CXX='${wl}-Bexport' +- runpath_var='LD_RUN_PATH' +- +- case $cc_basename in +- CC*) +- archive_cmds_CXX='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' +- archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' +- ;; +- *) +- archive_cmds_CXX='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' +- archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' +- ;; +- esac +- ;; +- tandem*) +- case $cc_basename in +- NCC*) +- # NonStop-UX NCC 3.20 +- # FIXME: insert proper C++ library support +- ld_shlibs_CXX=no +- ;; +- *) +- # FIXME: insert proper C++ library support +- ld_shlibs_CXX=no +- ;; +- esac +- ;; +- vxworks*) +- # FIXME: insert proper C++ library support +- ld_shlibs_CXX=no +- ;; +- *) +- # FIXME: insert proper C++ library support +- ld_shlibs_CXX=no +- ;; +-esac +-{ $as_echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5 +-$as_echo "$ld_shlibs_CXX" >&6; } +-test "$ld_shlibs_CXX" = no && can_build_shared=no +- +-GCC_CXX="$GXX" +-LD_CXX="$LD" +- +-cat > conftest.$ac_ext <&5 +- (eval $ac_compile) 2>&5 +- ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then +- # Parse the compiler output and extract the necessary +- # objects, libraries and library flags. + +- # Sentinel used to keep track of whether or not we are before +- # the conftest object file. +- pre_test_object_deps_done=no +- +- # The `*' in the case matches for architectures that use `case' in +- # $output_verbose_cmd can trigger glob expansion during the loop +- # eval without this substitution. +- output_verbose_link_cmd=`$echo "X$output_verbose_link_cmd" | $Xsed -e "$no_glob_subst"` +- +- for p in `eval $output_verbose_link_cmd`; do +- case $p in +- +- -L* | -R* | -l*) +- # Some compilers place space between "-{L,R}" and the path. +- # Remove the space. +- if test $p = "-L" \ +- || test $p = "-R"; then +- prev=$p +- continue +- else +- prev= +- fi + +- if test "$pre_test_object_deps_done" = no; then +- case $p in +- -L* | -R*) +- # Internal compiler library paths should come after those +- # provided the user. The postdeps already come after the +- # user supplied libs so there is no need to process them. +- if test -z "$compiler_lib_search_path_CXX"; then +- compiler_lib_search_path_CXX="${prev}${p}" +- else +- compiler_lib_search_path_CXX="${compiler_lib_search_path_CXX} ${prev}${p}" +- fi +- ;; +- # The "-l" case would never come before the object being +- # linked, so don't bother handling this case. +- esac +- else +- if test -z "$postdeps_CXX"; then +- postdeps_CXX="${prev}${p}" +- else +- postdeps_CXX="${postdeps_CXX} ${prev}${p}" +- fi +- fi +- ;; + +- *.$objext) +- # This assumes that the test object file only shows up +- # once in the compiler output. +- if test "$p" = "conftest.$objext"; then +- pre_test_object_deps_done=yes +- continue +- fi + +- if test "$pre_test_object_deps_done" = no; then +- if test -z "$predep_objects_CXX"; then +- predep_objects_CXX="$p" +- else +- predep_objects_CXX="$predep_objects_CXX $p" +- fi +- else +- if test -z "$postdep_objects_CXX"; then +- postdep_objects_CXX="$p" +- else +- postdep_objects_CXX="$postdep_objects_CXX $p" +- fi +- fi +- ;; + +- *) ;; # Ignore the rest. + +- esac +- done + +- # Clean up. +- rm -f a.out a.exe +-else +- echo "libtool.m4: error: problem compiling CXX test program" +-fi + +-$rm -f confest.$objext + +-compiler_lib_search_dirs_CXX= +-if test -n "$compiler_lib_search_path_CXX"; then +- compiler_lib_search_dirs_CXX=`echo " ${compiler_lib_search_path_CXX}" | ${SED} -e 's! -L! !g' -e 's!^ !!'` +-fi + +-# PORTME: override above test on systems where it is broken +-case $host_os in +-interix[3-9]*) +- # Interix 3.5 installs completely hosed .la files for C++, so rather than +- # hack all around it, let's just trust "g++" to DTRT. +- predep_objects_CXX= +- postdep_objects_CXX= +- postdeps_CXX= +- ;; + +-linux*) +- case `$CC -V 2>&1 | sed 5q` in +- *Sun\ C*) +- # Sun C++ 5.9 +- # +- # The more standards-conforming stlport4 library is +- # incompatible with the Cstd library. Avoid specifying +- # it if it's in CXXFLAGS. Ignore libCrun as +- # -library=stlport4 depends on it. +- case " $CXX $CXXFLAGS " in +- *" -library=stlport4 "*) +- solaris_use_stlport4=yes +- ;; +- esac +- if test "$solaris_use_stlport4" != yes; then +- postdeps_CXX='-library=Cstd -library=Crun' +- fi +- ;; +- esac +- ;; + +-solaris*) +- case $cc_basename in +- CC*) +- # The more standards-conforming stlport4 library is +- # incompatible with the Cstd library. Avoid specifying +- # it if it's in CXXFLAGS. Ignore libCrun as +- # -library=stlport4 depends on it. +- case " $CXX $CXXFLAGS " in +- *" -library=stlport4 "*) +- solaris_use_stlport4=yes +- ;; +- esac + +- # Adding this requires a known-good setup of shared libraries for +- # Sun compiler versions before 5.6, else PIC objects from an old +- # archive will be linked into the output, leading to subtle bugs. +- if test "$solaris_use_stlport4" != yes; then +- postdeps_CXX='-library=Cstd -library=Crun' +- fi +- ;; +- esac +- ;; +-esac + +-case " $postdeps_CXX " in +-*" -lc "*) archive_cmds_need_lc_CXX=no ;; +-esac + +-lt_prog_compiler_wl_CXX= +-lt_prog_compiler_pic_CXX= +-lt_prog_compiler_static_CXX= + +-{ $as_echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 +-$as_echo_n "checking for $compiler option to produce PIC... " >&6; } + +- # C++ specific cases for pic, static, wl, etc. +- if test "$GXX" = yes; then +- lt_prog_compiler_wl_CXX='-Wl,' +- lt_prog_compiler_static_CXX='-static' + +- case $host_os in +- aix*) +- # All AIX code is PIC. +- if test "$host_cpu" = ia64; then +- # AIX 5 now supports IA64 processor +- lt_prog_compiler_static_CXX='-Bstatic' +- fi +- ;; +- amigaos*) +- # FIXME: we need at least 68020 code to build shared libraries, but +- # adding the `-m68020' flag to GCC prevents building anything better, +- # like `-m68040'. +- lt_prog_compiler_pic_CXX='-m68020 -resident32 -malways-restore-a4' +- ;; +- beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) +- # PIC is the default for these OSes. +- ;; +- mingw* | cygwin* | os2* | pw32*) +- # This hack is so that the source file can tell whether it is being +- # built for inclusion in a dll (and should export symbols for example). +- # Although the cygwin gcc ignores -fPIC, still need this for old-style +- # (--disable-auto-import) libraries +- lt_prog_compiler_pic_CXX='-DDLL_EXPORT' +- ;; +- darwin* | rhapsody*) +- # PIC is the default on this platform +- # Common symbols not allowed in MH_DYLIB files +- lt_prog_compiler_pic_CXX='-fno-common' +- ;; +- *djgpp*) +- # DJGPP does not support shared libraries at all +- lt_prog_compiler_pic_CXX= +- ;; +- interix[3-9]*) +- # Interix 3.x gcc -fpic/-fPIC options generate broken code. +- # Instead, we relocate shared libraries at runtime. +- ;; +- sysv4*MP*) +- if test -d /usr/nec; then +- lt_prog_compiler_pic_CXX=-Kconform_pic +- fi +- ;; +- hpux*) +- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but +- # not for PA HP-UX. +- case $host_cpu in +- hppa*64*|ia64*) +- ;; +- *) +- lt_prog_compiler_pic_CXX='-fPIC' +- ;; +- esac +- ;; +- *) +- lt_prog_compiler_pic_CXX='-fPIC' +- ;; +- esac +- else +- case $host_os in +- aix[4-9]*) +- # All AIX code is PIC. +- if test "$host_cpu" = ia64; then +- # AIX 5 now supports IA64 processor +- lt_prog_compiler_static_CXX='-Bstatic' +- else +- lt_prog_compiler_static_CXX='-bnso -bI:/lib/syscalls.exp' +- fi +- ;; +- chorus*) +- case $cc_basename in +- cxch68*) +- # Green Hills C++ Compiler +- # _LT_AC_TAGVAR(lt_prog_compiler_static, CXX)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" +- ;; +- esac +- ;; +- darwin*) +- # PIC is the default on this platform +- # Common symbols not allowed in MH_DYLIB files +- case $cc_basename in +- xlc*) +- lt_prog_compiler_pic_CXX='-qnocommon' +- lt_prog_compiler_wl_CXX='-Wl,' +- ;; +- esac +- ;; +- dgux*) +- case $cc_basename in +- ec++*) +- lt_prog_compiler_pic_CXX='-KPIC' +- ;; +- ghcx*) +- # Green Hills C++ Compiler +- lt_prog_compiler_pic_CXX='-pic' +- ;; +- *) +- ;; +- esac +- ;; +- freebsd* | dragonfly*) +- # FreeBSD uses GNU C++ +- ;; +- hpux9* | hpux10* | hpux11*) +- case $cc_basename in +- CC*) +- lt_prog_compiler_wl_CXX='-Wl,' +- lt_prog_compiler_static_CXX='${wl}-a ${wl}archive' +- if test "$host_cpu" != ia64; then +- lt_prog_compiler_pic_CXX='+Z' +- fi +- ;; +- aCC*) +- lt_prog_compiler_wl_CXX='-Wl,' +- lt_prog_compiler_static_CXX='${wl}-a ${wl}archive' +- case $host_cpu in +- hppa*64*|ia64*) +- # +Z the default +- ;; +- *) +- lt_prog_compiler_pic_CXX='+Z' +- ;; +- esac +- ;; +- *) +- ;; +- esac +- ;; +- interix*) +- # This is c89, which is MS Visual C++ (no shared libs) +- # Anyone wants to do a port? +- ;; +- irix5* | irix6* | nonstopux*) +- case $cc_basename in +- CC*) +- lt_prog_compiler_wl_CXX='-Wl,' +- lt_prog_compiler_static_CXX='-non_shared' +- # CC pic flag -KPIC is the default. +- ;; +- *) +- ;; +- esac +- ;; +- linux* | k*bsd*-gnu) +- case $cc_basename in +- KCC*) +- # KAI C++ Compiler +- lt_prog_compiler_wl_CXX='--backend -Wl,' +- lt_prog_compiler_pic_CXX='-fPIC' +- ;; +- icpc* | ecpc*) +- # Intel C++ +- lt_prog_compiler_wl_CXX='-Wl,' +- lt_prog_compiler_pic_CXX='-KPIC' +- lt_prog_compiler_static_CXX='-static' +- ;; +- pgCC* | pgcpp*) +- # Portland Group C++ compiler. +- lt_prog_compiler_wl_CXX='-Wl,' +- lt_prog_compiler_pic_CXX='-fpic' +- lt_prog_compiler_static_CXX='-Bstatic' +- ;; +- cxx*) +- # Compaq C++ +- # Make sure the PIC flag is empty. It appears that all Alpha +- # Linux and Compaq Tru64 Unix objects are PIC. +- lt_prog_compiler_pic_CXX= +- lt_prog_compiler_static_CXX='-non_shared' +- ;; +- *) +- case `$CC -V 2>&1 | sed 5q` in +- *Sun\ C*) +- # Sun C++ 5.9 +- lt_prog_compiler_pic_CXX='-KPIC' +- lt_prog_compiler_static_CXX='-Bstatic' +- lt_prog_compiler_wl_CXX='-Qoption ld ' +- ;; +- esac +- ;; +- esac +- ;; +- lynxos*) +- ;; +- m88k*) +- ;; +- mvs*) +- case $cc_basename in +- cxx*) +- lt_prog_compiler_pic_CXX='-W c,exportall' +- ;; +- *) +- ;; +- esac +- ;; +- netbsd*) +- ;; +- osf3* | osf4* | osf5*) +- case $cc_basename in +- KCC*) +- lt_prog_compiler_wl_CXX='--backend -Wl,' +- ;; +- RCC*) +- # Rational C++ 2.4.1 +- lt_prog_compiler_pic_CXX='-pic' +- ;; +- cxx*) +- # Digital/Compaq C++ +- lt_prog_compiler_wl_CXX='-Wl,' +- # Make sure the PIC flag is empty. It appears that all Alpha +- # Linux and Compaq Tru64 Unix objects are PIC. +- lt_prog_compiler_pic_CXX= +- lt_prog_compiler_static_CXX='-non_shared' +- ;; +- *) +- ;; +- esac +- ;; +- psos*) +- ;; +- solaris*) +- case $cc_basename in +- CC*) +- # Sun C++ 4.2, 5.x and Centerline C++ +- lt_prog_compiler_pic_CXX='-KPIC' +- lt_prog_compiler_static_CXX='-Bstatic' +- lt_prog_compiler_wl_CXX='-Qoption ld ' +- ;; +- gcx*) +- # Green Hills C++ Compiler +- lt_prog_compiler_pic_CXX='-PIC' +- ;; +- *) +- ;; +- esac +- ;; +- sunos4*) +- case $cc_basename in +- CC*) +- # Sun C++ 4.x +- lt_prog_compiler_pic_CXX='-pic' +- lt_prog_compiler_static_CXX='-Bstatic' +- ;; +- lcc*) +- # Lucid +- lt_prog_compiler_pic_CXX='-pic' +- ;; +- *) +- ;; +- esac +- ;; +- tandem*) +- case $cc_basename in +- NCC*) +- # NonStop-UX NCC 3.20 +- lt_prog_compiler_pic_CXX='-KPIC' +- ;; +- *) +- ;; +- esac +- ;; +- sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) +- case $cc_basename in +- CC*) +- lt_prog_compiler_wl_CXX='-Wl,' +- lt_prog_compiler_pic_CXX='-KPIC' +- lt_prog_compiler_static_CXX='-Bstatic' +- ;; +- esac +- ;; +- vxworks*) +- ;; +- *) +- lt_prog_compiler_can_build_shared_CXX=no +- ;; +- esac +- fi + +-{ $as_echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_CXX" >&5 +-$as_echo "$lt_prog_compiler_pic_CXX" >&6; } + +-# +-# Check to make sure the PIC flag actually works. +-# +-if test -n "$lt_prog_compiler_pic_CXX"; then + +-{ $as_echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works" >&5 +-$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works... " >&6; } +-if test "${lt_cv_prog_compiler_pic_works_CXX+set}" = set; then +- $as_echo_n "(cached) " >&6 +-else +- lt_cv_prog_compiler_pic_works_CXX=no +- ac_outfile=conftest.$ac_objext +- echo "$lt_simple_compile_test_code" > conftest.$ac_ext +- lt_compiler_flag="$lt_prog_compiler_pic_CXX -DPIC" +- # Insert the option either (1) after the last *FLAGS variable, or +- # (2) before a word containing "conftest.", or (3) at the end. +- # Note that $ac_compile itself does not contain backslashes and begins +- # with a dollar sign (not a hyphen), so the echo should work correctly. +- # The option is referenced via a variable to avoid confusing sed. +- lt_compile=`echo "$ac_compile" | $SED \ +- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ +- -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ +- -e 's:$: $lt_compiler_flag:'` +- (eval echo "\"\$as_me:14656: $lt_compile\"" >&5) +- (eval "$lt_compile" 2>conftest.err) +- ac_status=$? +- cat conftest.err >&5 +- echo "$as_me:14660: \$? = $ac_status" >&5 +- if (exit $ac_status) && test -s "$ac_outfile"; then +- # The compiler can only warn and ignore the option if not recognized +- # So say no if there are warnings other than the usual output. +- $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp +- $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 +- if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then +- lt_cv_prog_compiler_pic_works_CXX=yes +- fi +- fi +- $rm conftest* + +-fi +-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works_CXX" >&5 +-$as_echo "$lt_cv_prog_compiler_pic_works_CXX" >&6; } + +-if test x"$lt_cv_prog_compiler_pic_works_CXX" = xyes; then +- case $lt_prog_compiler_pic_CXX in +- "" | " "*) ;; +- *) lt_prog_compiler_pic_CXX=" $lt_prog_compiler_pic_CXX" ;; +- esac +-else +- lt_prog_compiler_pic_CXX= +- lt_prog_compiler_can_build_shared_CXX=no +-fi + +-fi +-case $host_os in +- # For platforms which do not support PIC, -DPIC is meaningless: +- *djgpp*) +- lt_prog_compiler_pic_CXX= +- ;; +- *) +- lt_prog_compiler_pic_CXX="$lt_prog_compiler_pic_CXX -DPIC" +- ;; +-esac + +-# +-# Check to make sure the static flag actually works. +-# +-wl=$lt_prog_compiler_wl_CXX eval lt_tmp_static_flag=\"$lt_prog_compiler_static_CXX\" +-{ $as_echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 +-$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; } +-if test "${lt_cv_prog_compiler_static_works_CXX+set}" = set; then +- $as_echo_n "(cached) " >&6 +-else +- lt_cv_prog_compiler_static_works_CXX=no +- save_LDFLAGS="$LDFLAGS" +- LDFLAGS="$LDFLAGS $lt_tmp_static_flag" +- echo "$lt_simple_link_test_code" > conftest.$ac_ext +- if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then +- # The linker can only warn and ignore the option if not recognized +- # So say no if there are warnings +- if test -s conftest.err; then +- # Append any errors to the config.log. +- cat conftest.err 1>&5 +- $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp +- $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 +- if diff conftest.exp conftest.er2 >/dev/null; then +- lt_cv_prog_compiler_static_works_CXX=yes +- fi +- else +- lt_cv_prog_compiler_static_works_CXX=yes +- fi +- fi +- $rm -r conftest* +- LDFLAGS="$save_LDFLAGS" + +-fi +-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works_CXX" >&5 +-$as_echo "$lt_cv_prog_compiler_static_works_CXX" >&6; } + +-if test x"$lt_cv_prog_compiler_static_works_CXX" = xyes; then +- : +-else +- lt_prog_compiler_static_CXX= +-fi + + +-{ $as_echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 +-$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } +-if test "${lt_cv_prog_compiler_c_o_CXX+set}" = set; then +- $as_echo_n "(cached) " >&6 +-else +- lt_cv_prog_compiler_c_o_CXX=no +- $rm -r conftest 2>/dev/null +- mkdir conftest +- cd conftest +- mkdir out +- echo "$lt_simple_compile_test_code" > conftest.$ac_ext + +- lt_compiler_flag="-o out/conftest2.$ac_objext" +- # Insert the option either (1) after the last *FLAGS variable, or +- # (2) before a word containing "conftest.", or (3) at the end. +- # Note that $ac_compile itself does not contain backslashes and begins +- # with a dollar sign (not a hyphen), so the echo should work correctly. +- lt_compile=`echo "$ac_compile" | $SED \ +- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ +- -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ +- -e 's:$: $lt_compiler_flag:'` +- (eval echo "\"\$as_me:14760: $lt_compile\"" >&5) +- (eval "$lt_compile" 2>out/conftest.err) +- ac_status=$? +- cat out/conftest.err >&5 +- echo "$as_me:14764: \$? = $ac_status" >&5 +- if (exit $ac_status) && test -s out/conftest2.$ac_objext +- then +- # The compiler can only warn and ignore the option if not recognized +- # So say no if there are warnings +- $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp +- $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 +- if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then +- lt_cv_prog_compiler_c_o_CXX=yes +- fi +- fi +- chmod u+w . 2>&5 +- $rm conftest* +- # SGI C++ compiler will create directory out/ii_files/ for +- # template instantiation +- test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files +- $rm out/* && rmdir out +- cd .. +- rmdir conftest +- $rm conftest* + +-fi +-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_CXX" >&5 +-$as_echo "$lt_cv_prog_compiler_c_o_CXX" >&6; } + + +-hard_links="nottested" +-if test "$lt_cv_prog_compiler_c_o_CXX" = no && test "$need_locks" != no; then +- # do not overwrite the value of need_locks provided by the user +- { $as_echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 +-$as_echo_n "checking if we can lock with hard links... " >&6; } +- hard_links=yes +- $rm conftest* +- ln conftest.a conftest.b 2>/dev/null && hard_links=no +- touch conftest.a +- ln conftest.a conftest.b 2>&5 || hard_links=no +- ln conftest.a conftest.b 2>/dev/null && hard_links=no +- { $as_echo "$as_me:$LINENO: result: $hard_links" >&5 +-$as_echo "$hard_links" >&6; } +- if test "$hard_links" = no; then +- { $as_echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 +-$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} +- need_locks=warn +- fi +-else +- need_locks=no +-fi + +-{ $as_echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 +-$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } + +- export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' +- case $host_os in +- aix[4-9]*) +- # If we're using GNU nm, then we don't want the "-C" option. +- # -C means demangle to AIX nm, but means don't demangle with GNU nm +- if $NM -V 2>&1 | grep 'GNU' > /dev/null; then +- export_symbols_cmds_CXX='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' +- else +- export_symbols_cmds_CXX='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' +- fi +- ;; +- pw32*) +- export_symbols_cmds_CXX="$ltdll_cmds" +- ;; +- cygwin* | mingw*) +- export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;/^.*[ ]__nm__/s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' +- ;; +- *) +- export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' +- ;; +- esac +- exclude_expsyms_CXX='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' + +-{ $as_echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5 +-$as_echo "$ld_shlibs_CXX" >&6; } +-test "$ld_shlibs_CXX" = no && can_build_shared=no + +-# +-# Do we need to explicitly link libc? +-# +-case "x$archive_cmds_need_lc_CXX" in +-x|xyes) +- # Assume -lc should be added +- archive_cmds_need_lc_CXX=yes + +- if test "$enable_shared" = yes && test "$GCC" = yes; then +- case $archive_cmds_CXX in +- *'~'*) +- # FIXME: we may have to deal with multi-command sequences. +- ;; +- '$CC '*) +- # Test whether the compiler implicitly links with -lc since on some +- # systems, -lgcc has to come before -lc. If gcc already passes -lc +- # to ld, don't add -lc before -lgcc. +- { $as_echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 +-$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; } +- $rm conftest* +- echo "$lt_simple_compile_test_code" > conftest.$ac_ext + +- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>&5 +- ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } 2>conftest.err; then +- soname=conftest +- lib=conftest +- libobjs=conftest.$ac_objext +- deplibs= +- wl=$lt_prog_compiler_wl_CXX +- pic_flag=$lt_prog_compiler_pic_CXX +- compiler_flags=-v +- linker_flags=-v +- verstring= +- output_objdir=. +- libname=conftest +- lt_save_allow_undefined_flag=$allow_undefined_flag_CXX +- allow_undefined_flag_CXX= +- if { (eval echo "$as_me:$LINENO: \"$archive_cmds_CXX 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5 +- (eval $archive_cmds_CXX 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5 +- ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } +- then +- archive_cmds_need_lc_CXX=no +- else +- archive_cmds_need_lc_CXX=yes +- fi +- allow_undefined_flag_CXX=$lt_save_allow_undefined_flag +- else +- cat conftest.err 1>&5 +- fi +- $rm conftest* +- { $as_echo "$as_me:$LINENO: result: $archive_cmds_need_lc_CXX" >&5 +-$as_echo "$archive_cmds_need_lc_CXX" >&6; } +- ;; +- esac +- fi +- ;; +-esac + +-{ $as_echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 +-$as_echo_n "checking dynamic linker characteristics... " >&6; } +-library_names_spec= +-libname_spec='lib$name' +-soname_spec= +-shrext_cmds=".so" +-postinstall_cmds= +-postuninstall_cmds= ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ { echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 ++echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; } ++ ++if test "$GCC" = yes; then ++ case $host_os in ++ darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; ++ *) lt_awk_arg="/^libraries:/" ;; ++ esac ++ lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"` ++ if $ECHO "$lt_search_path_spec" | $GREP ';' >/dev/null ; then ++ # if the path contains ";" then we assume it to be the separator ++ # otherwise default to the standard path separator (i.e. ":") - it is ++ # assumed that no part of a normal pathname contains ";" but that should ++ # okay in the real world where ";" in dirpaths is itself problematic. ++ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e 's/;/ /g'` ++ else ++ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` ++ fi ++ # Ok, now we have the path, separated by spaces, we can step through it ++ # and add multilib dir if necessary. ++ lt_tmp_lt_search_path_spec= ++ lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` ++ for lt_sys_path in $lt_search_path_spec; do ++ if test -d "$lt_sys_path/$lt_multi_os_dir"; then ++ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir" ++ else ++ test -d "$lt_sys_path" && \ ++ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" ++ fi ++ done ++ lt_search_path_spec=`$ECHO $lt_tmp_lt_search_path_spec | awk ' ++BEGIN {RS=" "; FS="/|\n";} { ++ lt_foo=""; ++ lt_count=0; ++ for (lt_i = NF; lt_i > 0; lt_i--) { ++ if ($lt_i != "" && $lt_i != ".") { ++ if ($lt_i == "..") { ++ lt_count++; ++ } else { ++ if (lt_count == 0) { ++ lt_foo="/" $lt_i lt_foo; ++ } else { ++ lt_count--; ++ } ++ } ++ } ++ } ++ if (lt_foo != "") { lt_freq[lt_foo]++; } ++ if (lt_freq[lt_foo] == 1) { print lt_foo; } ++}'` ++ sys_lib_search_path_spec=`$ECHO $lt_search_path_spec` ++else ++ sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" ++fi ++library_names_spec= ++libname_spec='lib$name' ++soname_spec= ++shrext_cmds=".so" ++postinstall_cmds= ++postuninstall_cmds= + finish_cmds= + finish_eval= + shlibpath_var= +@@ -14917,7 +10824,6 @@ + version_type=none + dynamic_linker="$host_os ld.so" + sys_lib_dlsearch_path_spec="/lib /usr/lib" +- + need_lib_prefix=unknown + hardcode_into_libs=no + +@@ -14954,7 +10860,7 @@ + aix4 | aix4.[01] | aix4.[01].*) + if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' + echo ' yes ' +- echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then ++ echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then + : + else + can_build_shared=no +@@ -14980,9 +10886,18 @@ + ;; + + amigaos*) +- library_names_spec='$libname.ixlibrary $libname.a' +- # Create ${libname}_ixlibrary.a entries in /sys/libs. +- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' ++ case $host_cpu in ++ powerpc) ++ # Since July 2007 AmigaOS4 officially supports .so libraries. ++ # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ ;; ++ m68k) ++ library_names_spec='$libname.ixlibrary $libname.a' ++ # Create ${libname}_ixlibrary.a entries in /sys/libs. ++ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' ++ ;; ++ esac + ;; + + beos*) +@@ -15016,14 +10931,17 @@ + library_names_spec='$libname.dll.a' + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \${file}`~ +- dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ ++ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname~ +- chmod a+x \$dldir/$dlname' ++ chmod a+x \$dldir/$dlname~ ++ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then ++ eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; ++ fi' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ +- $rm \$dlpath' ++ $RM \$dlpath' + shlibpath_overrides_runpath=yes + + case $host_os in +@@ -15035,17 +10953,17 @@ + mingw*) + # MinGW DLLs use traditional 'lib' prefix + soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' +- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` +- if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then ++ sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` ++ if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then + # It is most probably a Windows format PATH printed by + # mingw gcc, but we are running on Cygwin. Gcc prints its search + # path with ; separators, and with drive letters. We can handle the + # drive letters (cygwin fileutils understands them), so leave them, + # especially as we might pass files found there to a mingw objdump, + # which wouldn't understand a cygwinified path. Ahh. +- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` ++ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` + else +- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` ++ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi + ;; + pw32*) +@@ -15069,12 +10987,13 @@ + version_type=darwin + need_lib_prefix=no + need_version=no +- library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext' ++ library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext' + soname_spec='${libname}${release}${major}$shared_ext' + shlibpath_overrides_runpath=yes + shlibpath_var=DYLD_LIBRARY_PATH + shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' + ++ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib" + sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' + ;; + +@@ -15167,18 +11086,18 @@ + fi + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; +- hppa*64*) +- shrext_cmds='.sl' +- hardcode_into_libs=yes +- dynamic_linker="$host_os dld.sl" +- shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH +- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" +- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec +- ;; +- *) ++ hppa*64*) ++ shrext_cmds='.sl' ++ hardcode_into_libs=yes ++ dynamic_linker="$host_os dld.sl" ++ shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH ++ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" ++ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ++ ;; ++ *) + shrext_cmds='.sl' + dynamic_linker="$host_os dld.sl" + shlibpath_var=SHLIB_PATH +@@ -15255,17 +11174,69 @@ + finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no ++ # Some binutils ld are patched to set DT_RUNPATH ++ save_LDFLAGS=$LDFLAGS ++ save_libdir=$libdir ++ eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \ ++ LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\"" ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then ++ shlibpath_overrides_runpath=yes ++fi ++ ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++ LDFLAGS=$save_LDFLAGS ++ libdir=$save_libdir ++ + # This implies no fast_install, which is unacceptable. + # Some rework will be needed to allow for fast_install + # before this can be enabled. + hardcode_into_libs=yes +- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" +- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" + + # Append ld.so.conf contents to the search path + if test -f /etc/ld.so.conf; then +- lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` +- sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra" ++ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` ++ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" + fi + + # We used to test for /lib/ld.so.1 and disable shared libraries on +@@ -15277,11 +11248,23 @@ + dynamic_linker='GNU/Linux ld.so' + ;; + ++netbsdelf*-gnu) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=no ++ hardcode_into_libs=yes ++ dynamic_linker='NetBSD ld.elf_so' ++ ;; ++ + netbsd*) + version_type=sunos + need_lib_prefix=no + need_version=no +- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then ++ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + dynamic_linker='NetBSD (a.out) ld.so' +@@ -15302,14 +11285,16 @@ + shlibpath_overrides_runpath=yes + ;; + +-nto-qnx*) +- version_type=linux ++*nto* | *qnx*) ++ version_type=qnx + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=yes ++ shlibpath_overrides_runpath=no ++ hardcode_into_libs=yes ++ dynamic_linker='ldqnx.so' + ;; + + openbsd*) +@@ -15318,13 +11303,13 @@ + need_lib_prefix=no + # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. + case $host_os in +- openbsd3.3 | openbsd3.3.*) need_version=yes ;; +- *) need_version=no ;; ++ openbsd3.3 | openbsd3.3.*) need_version=yes ;; ++ *) need_version=no ;; + esac + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + shlibpath_var=LD_LIBRARY_PATH +- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then ++ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + case $host_os in + openbsd2.[89] | openbsd2.[89].*) + shlibpath_overrides_runpath=no +@@ -15396,7 +11381,6 @@ + sni) + shlibpath_overrides_runpath=no + need_lib_prefix=no +- export_dynamic_flag_spec='${wl}-Blargedynsym' + runpath_var=LD_RUN_PATH + ;; + siemens) +@@ -15427,13 +11411,12 @@ + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + if test "$with_gnu_ld" = yes; then + sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' +- shlibpath_overrides_runpath=no + else + sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' +- shlibpath_overrides_runpath=yes + case $host_os in + sco3.2v5*) + sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" +@@ -15443,6 +11426,17 @@ + sys_lib_dlsearch_path_spec='/usr/lib' + ;; + ++tpf*) ++ # TPF is a cross-target only. Preferred cross-host = GNU/Linux. ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_name_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=no ++ hardcode_into_libs=yes ++ ;; ++ + uts4*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +@@ -15454,4152 +11448,2961 @@ + dynamic_linker=no + ;; + esac +-{ $as_echo "$as_me:$LINENO: result: $dynamic_linker" >&5 +-$as_echo "$dynamic_linker" >&6; } ++{ echo "$as_me:$LINENO: result: $dynamic_linker" >&5 ++echo "${ECHO_T}$dynamic_linker" >&6; } + test "$dynamic_linker" = no && can_build_shared=no + +-if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then +- $as_echo_n "(cached) " >&6 +-else +- lt_cv_sys_lib_search_path_spec="$sys_lib_search_path_spec" ++variables_saved_for_relink="PATH $shlibpath_var $runpath_var" ++if test "$GCC" = yes; then ++ variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" + fi + +-sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" ++if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then ++ sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" ++fi + if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then +- $as_echo_n "(cached) " >&6 +-else +- lt_cv_sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec" ++ sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" + fi + +-sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" + +-variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +-if test "$GCC" = yes; then +- variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" +-fi + +-{ $as_echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 +-$as_echo_n "checking how to hardcode library paths into programs... " >&6; } +-hardcode_action_CXX= +-if test -n "$hardcode_libdir_flag_spec_CXX" || \ +- test -n "$runpath_var_CXX" || \ +- test "X$hardcode_automatic_CXX" = "Xyes" ; then + +- # We can hardcode non-existant directories. +- if test "$hardcode_direct_CXX" != no && +- # If the only mechanism to avoid hardcoding is shlibpath_var, we +- # have to relink, otherwise we might link with an installed library +- # when we should be linking with a yet-to-be-installed one +- ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, CXX)" != no && +- test "$hardcode_minus_L_CXX" != no; then +- # Linking always hardcodes the temporary library directory. +- hardcode_action_CXX=relink +- else +- # We can link without hardcoding, and we can hardcode nonexisting dirs. +- hardcode_action_CXX=immediate +- fi +-else +- # We cannot hardcode anything, or else we can only hardcode existing +- # directories. +- hardcode_action_CXX=unsupported +-fi +-{ $as_echo "$as_me:$LINENO: result: $hardcode_action_CXX" >&5 +-$as_echo "$hardcode_action_CXX" >&6; } + +-if test "$hardcode_action_CXX" = relink; then +- # Fast installation is not supported +- enable_fast_install=no +-elif test "$shlibpath_overrides_runpath" = yes || +- test "$enable_shared" = no; then +- # Fast installation is not necessary +- enable_fast_install=needless +-fi + + +-# The else clause should only fire when bootstrapping the +-# libtool distribution, otherwise you forgot to ship ltmain.sh +-# with your package, and you will get complaints that there are +-# no rules to generate ltmain.sh. +-if test -f "$ltmain"; then +- # See if we are running on zsh, and set the options which allow our commands through +- # without removal of \ escapes. +- if test -n "${ZSH_VERSION+set}" ; then +- setopt NO_GLOB_SUBST +- fi +- # Now quote all the things that may contain metacharacters while being +- # careful not to overquote the AC_SUBSTed values. We take copies of the +- # variables and quote the copies for generation of the libtool script. +- for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \ +- SED SHELL STRIP \ +- libname_spec library_names_spec soname_spec extract_expsyms_cmds \ +- old_striplib striplib file_magic_cmd finish_cmds finish_eval \ +- deplibs_check_method reload_flag reload_cmds need_locks \ +- lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ +- lt_cv_sys_global_symbol_to_c_name_address \ +- sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ +- old_postinstall_cmds old_postuninstall_cmds \ +- compiler_CXX \ +- CC_CXX \ +- LD_CXX \ +- lt_prog_compiler_wl_CXX \ +- lt_prog_compiler_pic_CXX \ +- lt_prog_compiler_static_CXX \ +- lt_prog_compiler_no_builtin_flag_CXX \ +- export_dynamic_flag_spec_CXX \ +- thread_safe_flag_spec_CXX \ +- whole_archive_flag_spec_CXX \ +- enable_shared_with_static_runtimes_CXX \ +- old_archive_cmds_CXX \ +- old_archive_from_new_cmds_CXX \ +- predep_objects_CXX \ +- postdep_objects_CXX \ +- predeps_CXX \ +- postdeps_CXX \ +- compiler_lib_search_path_CXX \ +- compiler_lib_search_dirs_CXX \ +- archive_cmds_CXX \ +- archive_expsym_cmds_CXX \ +- postinstall_cmds_CXX \ +- postuninstall_cmds_CXX \ +- old_archive_from_expsyms_cmds_CXX \ +- allow_undefined_flag_CXX \ +- no_undefined_flag_CXX \ +- export_symbols_cmds_CXX \ +- hardcode_libdir_flag_spec_CXX \ +- hardcode_libdir_flag_spec_ld_CXX \ +- hardcode_libdir_separator_CXX \ +- hardcode_automatic_CXX \ +- module_cmds_CXX \ +- module_expsym_cmds_CXX \ +- lt_cv_prog_compiler_c_o_CXX \ +- fix_srcfile_path_CXX \ +- exclude_expsyms_CXX \ +- include_expsyms_CXX; do +- +- case $var in +- old_archive_cmds_CXX | \ +- old_archive_from_new_cmds_CXX | \ +- archive_cmds_CXX | \ +- archive_expsym_cmds_CXX | \ +- module_cmds_CXX | \ +- module_expsym_cmds_CXX | \ +- old_archive_from_expsyms_cmds_CXX | \ +- export_symbols_cmds_CXX | \ +- extract_expsyms_cmds | reload_cmds | finish_cmds | \ +- postinstall_cmds | postuninstall_cmds | \ +- old_postinstall_cmds | old_postuninstall_cmds | \ +- sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) +- # Double-quote double-evaled strings. +- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" +- ;; +- *) +- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" +- ;; +- esac +- done + +- case $lt_echo in +- *'\$0 --fallback-echo"') +- lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` +- ;; +- esac + +-cfgfile="$ofile" + +- cat <<__EOF__ >> "$cfgfile" +-# ### BEGIN LIBTOOL TAG CONFIG: $tagname + +-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: + +-# Shell to use when invoking shell scripts. +-SHELL=$lt_SHELL + +-# Whether or not to build shared libraries. +-build_libtool_libs=$enable_shared + +-# Whether or not to build static libraries. +-build_old_libs=$enable_static + +-# Whether or not to add -lc for building shared libraries. +-build_libtool_need_lc=$archive_cmds_need_lc_CXX + +-# Whether or not to disallow shared libs when runtime libs are static +-allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_CXX + +-# Whether or not to optimize for fast installation. +-fast_install=$enable_fast_install + +-# The host system. +-host_alias=$host_alias +-host=$host +-host_os=$host_os + +-# The build system. +-build_alias=$build_alias +-build=$build +-build_os=$build_os + +-# An echo program that does not interpret backslashes. +-echo=$lt_echo + +-# The archiver. +-AR=$lt_AR +-AR_FLAGS=$lt_AR_FLAGS + +-# A C compiler. +-LTCC=$lt_LTCC + +-# LTCC compiler flags. +-LTCFLAGS=$lt_LTCFLAGS + +-# A language-specific compiler. +-CC=$lt_compiler_CXX + +-# Is the compiler the GNU C compiler? +-with_gcc=$GCC_CXX + +-# An ERE matcher. +-EGREP=$lt_EGREP + +-# The linker used to build libraries. +-LD=$lt_LD_CXX + +-# Whether we need hard or soft links. +-LN_S=$lt_LN_S + +-# A BSD-compatible nm program. +-NM=$lt_NM + +-# A symbol stripping program +-STRIP=$lt_STRIP + +-# Used to examine libraries when file_magic_cmd begins "file" +-MAGIC_CMD=$MAGIC_CMD + +-# Used on cygwin: DLL creation program. +-DLLTOOL="$DLLTOOL" + +-# Used on cygwin: object dumper. +-OBJDUMP="$OBJDUMP" + +-# Used on cygwin: assembler. +-AS="$AS" + +-# The name of the directory that contains temporary libtool files. +-objdir=$objdir + +-# How to create reloadable object files. +-reload_flag=$lt_reload_flag +-reload_cmds=$lt_reload_cmds + +-# How to pass a linker flag through the compiler. +-wl=$lt_lt_prog_compiler_wl_CXX + +-# Object file suffix (normally "o"). +-objext="$ac_objext" + +-# Old archive suffix (normally "a"). +-libext="$libext" + +-# Shared library suffix (normally ".so"). +-shrext_cmds='$shrext_cmds' + +-# Executable file suffix (normally ""). +-exeext="$exeext" + +-# Additional compiler flags for building library objects. +-pic_flag=$lt_lt_prog_compiler_pic_CXX +-pic_mode=$pic_mode + +-# What is the maximum length of a command? +-max_cmd_len=$lt_cv_sys_max_cmd_len + +-# Does compiler simultaneously support -c and -o options? +-compiler_c_o=$lt_lt_cv_prog_compiler_c_o_CXX + +-# Must we lock files when doing compilation? +-need_locks=$lt_need_locks + +-# Do we need the lib prefix for modules? +-need_lib_prefix=$need_lib_prefix + +-# Do we need a version for libraries? +-need_version=$need_version + +-# Whether dlopen is supported. +-dlopen_support=$enable_dlopen + +-# Whether dlopen of programs is supported. +-dlopen_self=$enable_dlopen_self + +-# Whether dlopen of statically linked programs is supported. +-dlopen_self_static=$enable_dlopen_self_static +- +-# Compiler flag to prevent dynamic linking. +-link_static_flag=$lt_lt_prog_compiler_static_CXX + +-# Compiler flag to turn off builtin functions. +-no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_CXX + +-# Compiler flag to allow reflexive dlopens. +-export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_CXX + +-# Compiler flag to generate shared objects directly from archives. +-whole_archive_flag_spec=$lt_whole_archive_flag_spec_CXX + +-# Compiler flag to generate thread-safe objects. +-thread_safe_flag_spec=$lt_thread_safe_flag_spec_CXX + +-# Library versioning type. +-version_type=$version_type + +-# Format of library name prefix. +-libname_spec=$lt_libname_spec + +-# List of archive names. First name is the real one, the rest are links. +-# The last name is the one that the linker finds with -lNAME. +-library_names_spec=$lt_library_names_spec + +-# The coded name of the library, if different from the real name. +-soname_spec=$lt_soname_spec + +-# Commands used to build and install an old-style archive. +-RANLIB=$lt_RANLIB +-old_archive_cmds=$lt_old_archive_cmds_CXX +-old_postinstall_cmds=$lt_old_postinstall_cmds +-old_postuninstall_cmds=$lt_old_postuninstall_cmds + +-# Create an old-style archive from a shared archive. +-old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_CXX + +-# Create a temporary old-style archive to link instead of a shared archive. +-old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_CXX + +-# Commands used to build and install a shared archive. +-archive_cmds=$lt_archive_cmds_CXX +-archive_expsym_cmds=$lt_archive_expsym_cmds_CXX +-postinstall_cmds=$lt_postinstall_cmds +-postuninstall_cmds=$lt_postuninstall_cmds + +-# Commands used to build a loadable module (assumed same as above if empty) +-module_cmds=$lt_module_cmds_CXX +-module_expsym_cmds=$lt_module_expsym_cmds_CXX + +-# Commands to strip libraries. +-old_striplib=$lt_old_striplib +-striplib=$lt_striplib + +-# Dependencies to place before the objects being linked to create a +-# shared library. +-predep_objects=$lt_predep_objects_CXX +- +-# Dependencies to place after the objects being linked to create a +-# shared library. +-postdep_objects=$lt_postdep_objects_CXX +- +-# Dependencies to place before the objects being linked to create a +-# shared library. +-predeps=$lt_predeps_CXX +- +-# Dependencies to place after the objects being linked to create a +-# shared library. +-postdeps=$lt_postdeps_CXX +- +-# The directories searched by this compiler when creating a shared +-# library +-compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_CXX +- +-# The library search path used internally by the compiler when linking +-# a shared library. +-compiler_lib_search_path=$lt_compiler_lib_search_path_CXX + +-# Method to check whether dependent libraries are shared objects. +-deplibs_check_method=$lt_deplibs_check_method + +-# Command to use when deplibs_check_method == file_magic. +-file_magic_cmd=$lt_file_magic_cmd + +-# Flag that allows shared libraries with undefined symbols to be built. +-allow_undefined_flag=$lt_allow_undefined_flag_CXX + +-# Flag that forces no undefined symbols. +-no_undefined_flag=$lt_no_undefined_flag_CXX + +-# Commands used to finish a libtool library installation in a directory. +-finish_cmds=$lt_finish_cmds + +-# Same as above, but a single script fragment to be evaled but not shown. +-finish_eval=$lt_finish_eval + +-# Take the output of nm and produce a listing of raw symbols and C names. +-global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe + +-# Transform the output of nm in a proper C declaration +-global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl + +-# Transform the output of nm in a C name address pair +-global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address + +-# This is the shared library runtime path variable. +-runpath_var=$runpath_var + +-# This is the shared library path variable. +-shlibpath_var=$shlibpath_var + +-# Is shlibpath searched before the hard-coded library search path? +-shlibpath_overrides_runpath=$shlibpath_overrides_runpath + +-# How to hardcode a shared library path into an executable. +-hardcode_action=$hardcode_action_CXX + +-# Whether we should hardcode library paths into libraries. +-hardcode_into_libs=$hardcode_into_libs + +-# Flag to hardcode \$libdir into a binary during linking. +-# This must work even if \$libdir does not exist. +-hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_CXX + +-# If ld is used when linking, flag to hardcode \$libdir into +-# a binary during linking. This must work even if \$libdir does +-# not exist. +-hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_CXX +- +-# Whether we need a single -rpath flag with a separated argument. +-hardcode_libdir_separator=$lt_hardcode_libdir_separator_CXX +- +-# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the +-# resulting binary. +-hardcode_direct=$hardcode_direct_CXX +- +-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the +-# resulting binary. +-hardcode_minus_L=$hardcode_minus_L_CXX +- +-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into +-# the resulting binary. +-hardcode_shlibpath_var=$hardcode_shlibpath_var_CXX +- +-# Set to yes if building a shared library automatically hardcodes DIR into the library +-# and all subsequent libraries and executables linked against it. +-hardcode_automatic=$hardcode_automatic_CXX + +-# Variables whose values should be saved in libtool wrapper scripts and +-# restored at relink time. +-variables_saved_for_relink="$variables_saved_for_relink" + +-# Whether libtool must link a program against all its dependency libraries. +-link_all_deplibs=$link_all_deplibs_CXX + +-# Compile-time system search path for libraries +-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec + +-# Run-time system search path for libraries +-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec + +-# Fix the shell variable \$srcfile for the compiler. +-fix_srcfile_path=$lt_fix_srcfile_path + +-# Set to yes if exported symbols are required. +-always_export_symbols=$always_export_symbols_CXX ++ { echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 ++echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; } ++hardcode_action= ++if test -n "$hardcode_libdir_flag_spec" || ++ test -n "$runpath_var" || ++ test "X$hardcode_automatic" = "Xyes" ; then + +-# The commands to list exported symbols. +-export_symbols_cmds=$lt_export_symbols_cmds_CXX ++ # We can hardcode non-existent directories. ++ if test "$hardcode_direct" != no && ++ # If the only mechanism to avoid hardcoding is shlibpath_var, we ++ # have to relink, otherwise we might link with an installed library ++ # when we should be linking with a yet-to-be-installed one ++ ## test "$_LT_TAGVAR(hardcode_shlibpath_var, )" != no && ++ test "$hardcode_minus_L" != no; then ++ # Linking always hardcodes the temporary library directory. ++ hardcode_action=relink ++ else ++ # We can link without hardcoding, and we can hardcode nonexisting dirs. ++ hardcode_action=immediate ++ fi ++else ++ # We cannot hardcode anything, or else we can only hardcode existing ++ # directories. ++ hardcode_action=unsupported ++fi ++{ echo "$as_me:$LINENO: result: $hardcode_action" >&5 ++echo "${ECHO_T}$hardcode_action" >&6; } + +-# The commands to extract the exported symbol list from a shared archive. +-extract_expsyms_cmds=$lt_extract_expsyms_cmds ++if test "$hardcode_action" = relink || ++ test "$inherit_rpath" = yes; then ++ # Fast installation is not supported ++ enable_fast_install=no ++elif test "$shlibpath_overrides_runpath" = yes || ++ test "$enable_shared" = no; then ++ # Fast installation is not necessary ++ enable_fast_install=needless ++fi + +-# Symbols that should not be listed in the preloaded symbols. +-exclude_expsyms=$lt_exclude_expsyms_CXX + +-# Symbols that must always be exported. +-include_expsyms=$lt_include_expsyms_CXX + +-# ### END LIBTOOL TAG CONFIG: $tagname + +-__EOF__ + + ++ if test "x$enable_dlopen" != xyes; then ++ enable_dlopen=unknown ++ enable_dlopen_self=unknown ++ enable_dlopen_self_static=unknown + else +- # If there is no Makefile yet, we rely on a make rule to execute +- # `config.status --recheck' to rerun these tests and create the +- # libtool script then. +- ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` +- if test -f "$ltmain_in"; then +- test -f Makefile && make "$ltmain" +- fi +-fi +- ++ lt_cv_dlopen=no ++ lt_cv_dlopen_libs= + +-ac_ext=c +-ac_cpp='$CPP $CPPFLAGS' +-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +-ac_compiler_gnu=$ac_cv_c_compiler_gnu ++ case $host_os in ++ beos*) ++ lt_cv_dlopen="load_add_on" ++ lt_cv_dlopen_libs= ++ lt_cv_dlopen_self=yes ++ ;; + +-CC=$lt_save_CC +-LDCXX=$LD +-LD=$lt_save_LD +-GCC=$lt_save_GCC +-with_gnu_ldcxx=$with_gnu_ld +-with_gnu_ld=$lt_save_with_gnu_ld +-lt_cv_path_LDCXX=$lt_cv_path_LD +-lt_cv_path_LD=$lt_save_path_LD +-lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld +-lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld ++ mingw* | pw32*) ++ lt_cv_dlopen="LoadLibrary" ++ lt_cv_dlopen_libs= ++ ;; + +- else +- tagname="" +- fi +- ;; ++ cygwin*) ++ lt_cv_dlopen="dlopen" ++ lt_cv_dlopen_libs= ++ ;; + +- F77) +- if test -n "$F77" && test "X$F77" != "Xno"; then ++ darwin*) ++ # if libdl is installed we need to link against it ++ { echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 ++echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6; } ++if test "${ac_cv_lib_dl_dlopen+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-ldl $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ + +-ac_ext=f +-ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5' +-ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +-ac_compiler_gnu=$ac_cv_f77_compiler_gnu +- +- +-archive_cmds_need_lc_F77=no +-allow_undefined_flag_F77= +-always_export_symbols_F77=no +-archive_expsym_cmds_F77= +-export_dynamic_flag_spec_F77= +-hardcode_direct_F77=no +-hardcode_libdir_flag_spec_F77= +-hardcode_libdir_flag_spec_ld_F77= +-hardcode_libdir_separator_F77= +-hardcode_minus_L_F77=no +-hardcode_automatic_F77=no +-module_cmds_F77= +-module_expsym_cmds_F77= +-link_all_deplibs_F77=unknown +-old_archive_cmds_F77=$old_archive_cmds +-no_undefined_flag_F77= +-whole_archive_flag_spec_F77= +-enable_shared_with_static_runtimes_F77=no ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char dlopen (); ++int ++main () ++{ ++return dlopen (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_dl_dlopen=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 + +-# Source file extension for f77 test sources. +-ac_ext=f ++ ac_cv_lib_dl_dlopen=no ++fi + +-# Object file extension for compiled f77 test sources. +-objext=o +-objext_F77=$objext ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 ++echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6; } ++if test $ac_cv_lib_dl_dlopen = yes; then ++ lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" ++else + +-# Code to be used in simple compile tests +-lt_simple_compile_test_code="\ +- subroutine t +- return +- end +-" ++ lt_cv_dlopen="dyld" ++ lt_cv_dlopen_libs= ++ lt_cv_dlopen_self=yes + +-# Code to be used in simple link tests +-lt_simple_link_test_code="\ +- program t +- end +-" ++fi + +-# ltmain only uses $CC for tagged configurations so make sure $CC is set. ++ ;; + +-# If no C compiler was specified, use CC. +-LTCC=${LTCC-"$CC"} ++ *) ++ { echo "$as_me:$LINENO: checking for shl_load" >&5 ++echo $ECHO_N "checking for shl_load... $ECHO_C" >&6; } ++if test "${ac_cv_func_shl_load+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++/* Define shl_load to an innocuous variant, in case declares shl_load. ++ For example, HP-UX 11i declares gettimeofday. */ ++#define shl_load innocuous_shl_load + +-# If no C compiler flags were specified, use CFLAGS. +-LTCFLAGS=${LTCFLAGS-"$CFLAGS"} ++/* System header to define __stub macros and hopefully few prototypes, ++ which can conflict with char shl_load (); below. ++ Prefer to if __STDC__ is defined, since ++ exists even on freestanding compilers. */ + +-# Allow CC to be a program name with arguments. +-compiler=$CC ++#ifdef __STDC__ ++# include ++#else ++# include ++#endif + ++#undef shl_load + +-# save warnings/boilerplate of simple test code +-ac_outfile=conftest.$ac_objext +-echo "$lt_simple_compile_test_code" >conftest.$ac_ext +-eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +-_lt_compiler_boilerplate=`cat conftest.err` +-$rm conftest* ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char shl_load (); ++/* The GNU C library defines this for functions which it implements ++ to always fail with ENOSYS. Some functions are actually named ++ something starting with __ and the normal name is an alias. */ ++#if defined __stub_shl_load || defined __stub___shl_load ++choke me ++#endif + +-ac_outfile=conftest.$ac_objext +-echo "$lt_simple_link_test_code" >conftest.$ac_ext +-eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +-_lt_linker_boilerplate=`cat conftest.err` +-$rm -r conftest* ++int ++main () ++{ ++return shl_load (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_func_shl_load=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 + ++ ac_cv_func_shl_load=no ++fi + +-# Allow CC to be a program name with arguments. +-lt_save_CC="$CC" +-CC=${F77-"f77"} +-compiler=$CC +-compiler_F77=$CC +-for cc_temp in $compiler""; do +- case $cc_temp in +- compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; +- distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; +- \-*) ;; +- *) break;; +- esac +-done +-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` +- +- +-{ $as_echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5 +-$as_echo_n "checking if libtool supports shared libraries... " >&6; } +-{ $as_echo "$as_me:$LINENO: result: $can_build_shared" >&5 +-$as_echo "$can_build_shared" >&6; } +- +-{ $as_echo "$as_me:$LINENO: checking whether to build shared libraries" >&5 +-$as_echo_n "checking whether to build shared libraries... " >&6; } +-test "$can_build_shared" = "no" && enable_shared=no ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5 ++echo "${ECHO_T}$ac_cv_func_shl_load" >&6; } ++if test $ac_cv_func_shl_load = yes; then ++ lt_cv_dlopen="shl_load" ++else ++ { echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5 ++echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6; } ++if test "${ac_cv_lib_dld_shl_load+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-ldld $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ + +-# On AIX, shared libraries and static libraries use the same namespace, and +-# are all built from PIC. +-case $host_os in +-aix3*) +- test "$enable_shared" = yes && enable_static=no +- if test -n "$RANLIB"; then +- archive_cmds="$archive_cmds~\$RANLIB \$lib" +- postinstall_cmds='$RANLIB $lib' +- fi +- ;; +-aix[4-9]*) +- if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then +- test "$enable_shared" = yes && enable_static=no +- fi +- ;; ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char shl_load (); ++int ++main () ++{ ++return shl_load (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; + esac +-{ $as_echo "$as_me:$LINENO: result: $enable_shared" >&5 +-$as_echo "$enable_shared" >&6; } ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_dld_shl_load=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 + +-{ $as_echo "$as_me:$LINENO: checking whether to build static libraries" >&5 +-$as_echo_n "checking whether to build static libraries... " >&6; } +-# Make sure either enable_shared or enable_static is yes. +-test "$enable_shared" = yes || enable_static=yes +-{ $as_echo "$as_me:$LINENO: result: $enable_static" >&5 +-$as_echo "$enable_static" >&6; } +- +-GCC_F77="$G77" +-LD_F77="$LD" +- +-lt_prog_compiler_wl_F77= +-lt_prog_compiler_pic_F77= +-lt_prog_compiler_static_F77= ++ ac_cv_lib_dld_shl_load=no ++fi + +-{ $as_echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 +-$as_echo_n "checking for $compiler option to produce PIC... " >&6; } ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5 ++echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6; } ++if test $ac_cv_lib_dld_shl_load = yes; then ++ lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld" ++else ++ { echo "$as_me:$LINENO: checking for dlopen" >&5 ++echo $ECHO_N "checking for dlopen... $ECHO_C" >&6; } ++if test "${ac_cv_func_dlopen+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++/* Define dlopen to an innocuous variant, in case declares dlopen. ++ For example, HP-UX 11i declares gettimeofday. */ ++#define dlopen innocuous_dlopen + +- if test "$GCC" = yes; then +- lt_prog_compiler_wl_F77='-Wl,' +- lt_prog_compiler_static_F77='-static' ++/* System header to define __stub macros and hopefully few prototypes, ++ which can conflict with char dlopen (); below. ++ Prefer to if __STDC__ is defined, since ++ exists even on freestanding compilers. */ + +- case $host_os in +- aix*) +- # All AIX code is PIC. +- if test "$host_cpu" = ia64; then +- # AIX 5 now supports IA64 processor +- lt_prog_compiler_static_F77='-Bstatic' +- fi +- ;; ++#ifdef __STDC__ ++# include ++#else ++# include ++#endif + +- amigaos*) +- # FIXME: we need at least 68020 code to build shared libraries, but +- # adding the `-m68020' flag to GCC prevents building anything better, +- # like `-m68040'. +- lt_prog_compiler_pic_F77='-m68020 -resident32 -malways-restore-a4' +- ;; ++#undef dlopen + +- beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) +- # PIC is the default for these OSes. +- ;; ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char dlopen (); ++/* The GNU C library defines this for functions which it implements ++ to always fail with ENOSYS. Some functions are actually named ++ something starting with __ and the normal name is an alias. */ ++#if defined __stub_dlopen || defined __stub___dlopen ++choke me ++#endif + +- mingw* | cygwin* | pw32* | os2*) +- # This hack is so that the source file can tell whether it is being +- # built for inclusion in a dll (and should export symbols for example). +- # Although the cygwin gcc ignores -fPIC, still need this for old-style +- # (--disable-auto-import) libraries +- lt_prog_compiler_pic_F77='-DDLL_EXPORT' +- ;; ++int ++main () ++{ ++return dlopen (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_func_dlopen=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 + +- darwin* | rhapsody*) +- # PIC is the default on this platform +- # Common symbols not allowed in MH_DYLIB files +- lt_prog_compiler_pic_F77='-fno-common' +- ;; ++ ac_cv_func_dlopen=no ++fi + +- interix[3-9]*) +- # Interix 3.x gcc -fpic/-fPIC options generate broken code. +- # Instead, we relocate shared libraries at runtime. +- ;; ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5 ++echo "${ECHO_T}$ac_cv_func_dlopen" >&6; } ++if test $ac_cv_func_dlopen = yes; then ++ lt_cv_dlopen="dlopen" ++else ++ { echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 ++echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6; } ++if test "${ac_cv_lib_dl_dlopen+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-ldl $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ + +- msdosdjgpp*) +- # Just because we use GCC doesn't mean we suddenly get shared libraries +- # on systems that don't support them. +- lt_prog_compiler_can_build_shared_F77=no +- enable_shared=no +- ;; ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char dlopen (); ++int ++main () ++{ ++return dlopen (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_dl_dlopen=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 + +- sysv4*MP*) +- if test -d /usr/nec; then +- lt_prog_compiler_pic_F77=-Kconform_pic +- fi +- ;; ++ ac_cv_lib_dl_dlopen=no ++fi + +- hpux*) +- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but +- # not for PA HP-UX. +- case $host_cpu in +- hppa*64*|ia64*) +- # +Z the default +- ;; +- *) +- lt_prog_compiler_pic_F77='-fPIC' +- ;; +- esac +- ;; ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 ++echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6; } ++if test $ac_cv_lib_dl_dlopen = yes; then ++ lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" ++else ++ { echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5 ++echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6; } ++if test "${ac_cv_lib_svld_dlopen+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-lsvld $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ + +- *) +- lt_prog_compiler_pic_F77='-fPIC' +- ;; +- esac +- else +- # PORTME Check for flag to pass linker flags through the system compiler. +- case $host_os in +- aix*) +- lt_prog_compiler_wl_F77='-Wl,' +- if test "$host_cpu" = ia64; then +- # AIX 5 now supports IA64 processor +- lt_prog_compiler_static_F77='-Bstatic' +- else +- lt_prog_compiler_static_F77='-bnso -bI:/lib/syscalls.exp' +- fi +- ;; +- darwin*) +- # PIC is the default on this platform +- # Common symbols not allowed in MH_DYLIB files +- case $cc_basename in +- xlc*) +- lt_prog_compiler_pic_F77='-qnocommon' +- lt_prog_compiler_wl_F77='-Wl,' +- ;; +- esac +- ;; +- +- mingw* | cygwin* | pw32* | os2*) +- # This hack is so that the source file can tell whether it is being +- # built for inclusion in a dll (and should export symbols for example). +- lt_prog_compiler_pic_F77='-DDLL_EXPORT' +- ;; +- +- hpux9* | hpux10* | hpux11*) +- lt_prog_compiler_wl_F77='-Wl,' +- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but +- # not for PA HP-UX. +- case $host_cpu in +- hppa*64*|ia64*) +- # +Z the default +- ;; +- *) +- lt_prog_compiler_pic_F77='+Z' +- ;; +- esac +- # Is there a better lt_prog_compiler_static that works with the bundled CC? +- lt_prog_compiler_static_F77='${wl}-a ${wl}archive' +- ;; +- +- irix5* | irix6* | nonstopux*) +- lt_prog_compiler_wl_F77='-Wl,' +- # PIC (with -KPIC) is the default. +- lt_prog_compiler_static_F77='-non_shared' +- ;; +- +- newsos6) +- lt_prog_compiler_pic_F77='-KPIC' +- lt_prog_compiler_static_F77='-Bstatic' +- ;; +- +- linux* | k*bsd*-gnu) +- case $cc_basename in +- icc* | ecc*) +- lt_prog_compiler_wl_F77='-Wl,' +- lt_prog_compiler_pic_F77='-KPIC' +- lt_prog_compiler_static_F77='-static' +- ;; +- pgcc* | pgf77* | pgf90* | pgf95*) +- # Portland Group compilers (*not* the Pentium gcc compiler, +- # which looks to be a dead project) +- lt_prog_compiler_wl_F77='-Wl,' +- lt_prog_compiler_pic_F77='-fpic' +- lt_prog_compiler_static_F77='-Bstatic' +- ;; +- ccc*) +- lt_prog_compiler_wl_F77='-Wl,' +- # All Alpha code is PIC. +- lt_prog_compiler_static_F77='-non_shared' +- ;; +- *) +- case `$CC -V 2>&1 | sed 5q` in +- *Sun\ C*) +- # Sun C 5.9 +- lt_prog_compiler_pic_F77='-KPIC' +- lt_prog_compiler_static_F77='-Bstatic' +- lt_prog_compiler_wl_F77='-Wl,' +- ;; +- *Sun\ F*) +- # Sun Fortran 8.3 passes all unrecognized flags to the linker +- lt_prog_compiler_pic_F77='-KPIC' +- lt_prog_compiler_static_F77='-Bstatic' +- lt_prog_compiler_wl_F77='' +- ;; +- esac +- ;; +- esac +- ;; +- +- osf3* | osf4* | osf5*) +- lt_prog_compiler_wl_F77='-Wl,' +- # All OSF/1 code is PIC. +- lt_prog_compiler_static_F77='-non_shared' +- ;; ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char dlopen (); ++int ++main () ++{ ++return dlopen (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_svld_dlopen=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 + +- rdos*) +- lt_prog_compiler_static_F77='-non_shared' +- ;; ++ ac_cv_lib_svld_dlopen=no ++fi + +- solaris*) +- lt_prog_compiler_pic_F77='-KPIC' +- lt_prog_compiler_static_F77='-Bstatic' +- case $cc_basename in +- f77* | f90* | f95*) +- lt_prog_compiler_wl_F77='-Qoption ld ';; +- *) +- lt_prog_compiler_wl_F77='-Wl,';; +- esac +- ;; ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5 ++echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6; } ++if test $ac_cv_lib_svld_dlopen = yes; then ++ lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" ++else ++ { echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5 ++echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6; } ++if test "${ac_cv_lib_dld_dld_link+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-ldld $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ + +- sunos4*) +- lt_prog_compiler_wl_F77='-Qoption ld ' +- lt_prog_compiler_pic_F77='-PIC' +- lt_prog_compiler_static_F77='-Bstatic' +- ;; ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char dld_link (); ++int ++main () ++{ ++return dld_link (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_dld_dld_link=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 + +- sysv4 | sysv4.2uw2* | sysv4.3*) +- lt_prog_compiler_wl_F77='-Wl,' +- lt_prog_compiler_pic_F77='-KPIC' +- lt_prog_compiler_static_F77='-Bstatic' +- ;; ++ ac_cv_lib_dld_dld_link=no ++fi + +- sysv4*MP*) +- if test -d /usr/nec ;then +- lt_prog_compiler_pic_F77='-Kconform_pic' +- lt_prog_compiler_static_F77='-Bstatic' +- fi +- ;; ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5 ++echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6; } ++if test $ac_cv_lib_dld_dld_link = yes; then ++ lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld" ++fi + +- sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) +- lt_prog_compiler_wl_F77='-Wl,' +- lt_prog_compiler_pic_F77='-KPIC' +- lt_prog_compiler_static_F77='-Bstatic' +- ;; + +- unicos*) +- lt_prog_compiler_wl_F77='-Wl,' +- lt_prog_compiler_can_build_shared_F77=no +- ;; ++fi + +- uts4*) +- lt_prog_compiler_pic_F77='-pic' +- lt_prog_compiler_static_F77='-Bstatic' +- ;; + +- *) +- lt_prog_compiler_can_build_shared_F77=no +- ;; +- esac +- fi ++fi + +-{ $as_echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_F77" >&5 +-$as_echo "$lt_prog_compiler_pic_F77" >&6; } + +-# +-# Check to make sure the PIC flag actually works. +-# +-if test -n "$lt_prog_compiler_pic_F77"; then ++fi + +-{ $as_echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works" >&5 +-$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works... " >&6; } +-if test "${lt_cv_prog_compiler_pic_works_F77+set}" = set; then +- $as_echo_n "(cached) " >&6 +-else +- lt_cv_prog_compiler_pic_works_F77=no +- ac_outfile=conftest.$ac_objext +- echo "$lt_simple_compile_test_code" > conftest.$ac_ext +- lt_compiler_flag="$lt_prog_compiler_pic_F77" +- # Insert the option either (1) after the last *FLAGS variable, or +- # (2) before a word containing "conftest.", or (3) at the end. +- # Note that $ac_compile itself does not contain backslashes and begins +- # with a dollar sign (not a hyphen), so the echo should work correctly. +- # The option is referenced via a variable to avoid confusing sed. +- lt_compile=`echo "$ac_compile" | $SED \ +- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ +- -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ +- -e 's:$: $lt_compiler_flag:'` +- (eval echo "\"\$as_me:16345: $lt_compile\"" >&5) +- (eval "$lt_compile" 2>conftest.err) +- ac_status=$? +- cat conftest.err >&5 +- echo "$as_me:16349: \$? = $ac_status" >&5 +- if (exit $ac_status) && test -s "$ac_outfile"; then +- # The compiler can only warn and ignore the option if not recognized +- # So say no if there are warnings other than the usual output. +- $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp +- $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 +- if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then +- lt_cv_prog_compiler_pic_works_F77=yes +- fi +- fi +- $rm conftest* + + fi +-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works_F77" >&5 +-$as_echo "$lt_cv_prog_compiler_pic_works_F77" >&6; } + +-if test x"$lt_cv_prog_compiler_pic_works_F77" = xyes; then +- case $lt_prog_compiler_pic_F77 in +- "" | " "*) ;; +- *) lt_prog_compiler_pic_F77=" $lt_prog_compiler_pic_F77" ;; +- esac +-else +- lt_prog_compiler_pic_F77= +- lt_prog_compiler_can_build_shared_F77=no +-fi + + fi +-case $host_os in +- # For platforms which do not support PIC, -DPIC is meaningless: +- *djgpp*) +- lt_prog_compiler_pic_F77= +- ;; +- *) +- lt_prog_compiler_pic_F77="$lt_prog_compiler_pic_F77" ++ + ;; +-esac ++ esac + +-# +-# Check to make sure the static flag actually works. +-# +-wl=$lt_prog_compiler_wl_F77 eval lt_tmp_static_flag=\"$lt_prog_compiler_static_F77\" +-{ $as_echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 +-$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; } +-if test "${lt_cv_prog_compiler_static_works_F77+set}" = set; then +- $as_echo_n "(cached) " >&6 +-else +- lt_cv_prog_compiler_static_works_F77=no +- save_LDFLAGS="$LDFLAGS" +- LDFLAGS="$LDFLAGS $lt_tmp_static_flag" +- echo "$lt_simple_link_test_code" > conftest.$ac_ext +- if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then +- # The linker can only warn and ignore the option if not recognized +- # So say no if there are warnings +- if test -s conftest.err; then +- # Append any errors to the config.log. +- cat conftest.err 1>&5 +- $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp +- $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 +- if diff conftest.exp conftest.er2 >/dev/null; then +- lt_cv_prog_compiler_static_works_F77=yes +- fi +- else +- lt_cv_prog_compiler_static_works_F77=yes +- fi +- fi +- $rm -r conftest* +- LDFLAGS="$save_LDFLAGS" ++ if test "x$lt_cv_dlopen" != xno; then ++ enable_dlopen=yes ++ else ++ enable_dlopen=no ++ fi + +-fi +-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works_F77" >&5 +-$as_echo "$lt_cv_prog_compiler_static_works_F77" >&6; } ++ case $lt_cv_dlopen in ++ dlopen) ++ save_CPPFLAGS="$CPPFLAGS" ++ test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" + +-if test x"$lt_cv_prog_compiler_static_works_F77" = xyes; then +- : +-else +- lt_prog_compiler_static_F77= +-fi ++ save_LDFLAGS="$LDFLAGS" ++ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" + ++ save_LIBS="$LIBS" ++ LIBS="$lt_cv_dlopen_libs $LIBS" + +-{ $as_echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 +-$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } +-if test "${lt_cv_prog_compiler_c_o_F77+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ { echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5 ++echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6; } ++if test "${lt_cv_dlopen_self+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- lt_cv_prog_compiler_c_o_F77=no +- $rm -r conftest 2>/dev/null +- mkdir conftest +- cd conftest +- mkdir out +- echo "$lt_simple_compile_test_code" > conftest.$ac_ext +- +- lt_compiler_flag="-o out/conftest2.$ac_objext" +- # Insert the option either (1) after the last *FLAGS variable, or +- # (2) before a word containing "conftest.", or (3) at the end. +- # Note that $ac_compile itself does not contain backslashes and begins +- # with a dollar sign (not a hyphen), so the echo should work correctly. +- lt_compile=`echo "$ac_compile" | $SED \ +- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ +- -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ +- -e 's:$: $lt_compiler_flag:'` +- (eval echo "\"\$as_me:16449: $lt_compile\"" >&5) +- (eval "$lt_compile" 2>out/conftest.err) +- ac_status=$? +- cat out/conftest.err >&5 +- echo "$as_me:16453: \$? = $ac_status" >&5 +- if (exit $ac_status) && test -s out/conftest2.$ac_objext +- then +- # The compiler can only warn and ignore the option if not recognized +- # So say no if there are warnings +- $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp +- $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 +- if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then +- lt_cv_prog_compiler_c_o_F77=yes +- fi +- fi +- chmod u+w . 2>&5 +- $rm conftest* +- # SGI C++ compiler will create directory out/ii_files/ for +- # template instantiation +- test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files +- $rm out/* && rmdir out +- cd .. +- rmdir conftest +- $rm conftest* ++ if test "$cross_compiling" = yes; then : ++ lt_cv_dlopen_self=cross ++else ++ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 ++ lt_status=$lt_dlunknown ++ cat > conftest.$ac_ext <<_LT_EOF ++#line 12168 "configure" ++#include "confdefs.h" + +-fi +-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_F77" >&5 +-$as_echo "$lt_cv_prog_compiler_c_o_F77" >&6; } ++#if HAVE_DLFCN_H ++#include ++#endif + ++#include + +-hard_links="nottested" +-if test "$lt_cv_prog_compiler_c_o_F77" = no && test "$need_locks" != no; then +- # do not overwrite the value of need_locks provided by the user +- { $as_echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 +-$as_echo_n "checking if we can lock with hard links... " >&6; } +- hard_links=yes +- $rm conftest* +- ln conftest.a conftest.b 2>/dev/null && hard_links=no +- touch conftest.a +- ln conftest.a conftest.b 2>&5 || hard_links=no +- ln conftest.a conftest.b 2>/dev/null && hard_links=no +- { $as_echo "$as_me:$LINENO: result: $hard_links" >&5 +-$as_echo "$hard_links" >&6; } +- if test "$hard_links" = no; then +- { $as_echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 +-$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} +- need_locks=warn +- fi +-else +- need_locks=no +-fi ++#ifdef RTLD_GLOBAL ++# define LT_DLGLOBAL RTLD_GLOBAL ++#else ++# ifdef DL_GLOBAL ++# define LT_DLGLOBAL DL_GLOBAL ++# else ++# define LT_DLGLOBAL 0 ++# endif ++#endif + +-{ $as_echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 +-$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } ++/* We may have to define LT_DLLAZY_OR_NOW in the command line if we ++ find out it does not work in some platform. */ ++#ifndef LT_DLLAZY_OR_NOW ++# ifdef RTLD_LAZY ++# define LT_DLLAZY_OR_NOW RTLD_LAZY ++# else ++# ifdef DL_LAZY ++# define LT_DLLAZY_OR_NOW DL_LAZY ++# else ++# ifdef RTLD_NOW ++# define LT_DLLAZY_OR_NOW RTLD_NOW ++# else ++# ifdef DL_NOW ++# define LT_DLLAZY_OR_NOW DL_NOW ++# else ++# define LT_DLLAZY_OR_NOW 0 ++# endif ++# endif ++# endif ++# endif ++#endif + +- runpath_var= +- allow_undefined_flag_F77= +- enable_shared_with_static_runtimes_F77=no +- archive_cmds_F77= +- archive_expsym_cmds_F77= +- old_archive_From_new_cmds_F77= +- old_archive_from_expsyms_cmds_F77= +- export_dynamic_flag_spec_F77= +- whole_archive_flag_spec_F77= +- thread_safe_flag_spec_F77= +- hardcode_libdir_flag_spec_F77= +- hardcode_libdir_flag_spec_ld_F77= +- hardcode_libdir_separator_F77= +- hardcode_direct_F77=no +- hardcode_minus_L_F77=no +- hardcode_shlibpath_var_F77=unsupported +- link_all_deplibs_F77=unknown +- hardcode_automatic_F77=no +- module_cmds_F77= +- module_expsym_cmds_F77= +- always_export_symbols_F77=no +- export_symbols_cmds_F77='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' +- # include_expsyms should be a list of space-separated symbols to be *always* +- # included in the symbol list +- include_expsyms_F77= +- # exclude_expsyms can be an extended regexp of symbols to exclude +- # it will be wrapped by ` (' and `)$', so one must not match beginning or +- # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', +- # as well as any symbol that contains `d'. +- exclude_expsyms_F77='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' +- # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out +- # platforms (ab)use it in PIC code, but their linkers get confused if +- # the symbol is explicitly referenced. Since portable code cannot +- # rely on this symbol name, it's probably fine to never include it in +- # preloaded symbol tables. +- # Exclude shared library initialization/finalization symbols. +- extract_expsyms_cmds= +- # Just being paranoid about ensuring that cc_basename is set. +- for cc_temp in $compiler""; do +- case $cc_temp in +- compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; +- distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; +- \-*) ;; +- *) break;; +- esac +-done +-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` ++#ifdef __cplusplus ++extern "C" void exit (int); ++#endif + +- case $host_os in +- cygwin* | mingw* | pw32*) +- # FIXME: the MSVC++ port hasn't been tested in a loooong time +- # When not using gcc, we currently assume that we are using +- # Microsoft Visual C++. +- if test "$GCC" != yes; then +- with_gnu_ld=no +- fi +- ;; +- interix*) +- # we just hope/assume this is gcc and not c89 (= MSVC++) +- with_gnu_ld=yes +- ;; +- openbsd*) +- with_gnu_ld=no +- ;; +- esac ++void fnord() { int i=42;} ++int main () ++{ ++ void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); ++ int status = $lt_dlunknown; + +- ld_shlibs_F77=yes +- if test "$with_gnu_ld" = yes; then +- # If archive_cmds runs LD, not CC, wlarc should be empty +- wlarc='${wl}' ++ if (self) ++ { ++ if (dlsym (self,"fnord")) status = $lt_dlno_uscore; ++ else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; ++ /* dlclose (self); */ ++ } ++ else ++ puts (dlerror ()); + +- # Set some defaults for GNU ld with shared library support. These +- # are reset later if shared libraries are not supported. Putting them +- # here allows them to be overridden if necessary. +- runpath_var=LD_RUN_PATH +- hardcode_libdir_flag_spec_F77='${wl}--rpath ${wl}$libdir' +- export_dynamic_flag_spec_F77='${wl}--export-dynamic' +- # ancient GNU ld didn't support --whole-archive et. al. +- if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then +- whole_archive_flag_spec_F77="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' +- else +- whole_archive_flag_spec_F77= +- fi +- supports_anon_versioning=no +- case `$LD -v 2>/dev/null` in +- *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 +- *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... +- *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... +- *\ 2.11.*) ;; # other 2.11 versions +- *) supports_anon_versioning=yes ;; ++ exit (status); ++} ++_LT_EOF ++ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ++ (eval $ac_link) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then ++ (./conftest; exit; ) >&5 2>/dev/null ++ lt_status=$? ++ case x$lt_status in ++ x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; ++ x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;; ++ x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;; + esac ++ else : ++ # compilation failed ++ lt_cv_dlopen_self=no ++ fi ++fi ++rm -fr conftest* + +- # See if GNU ld supports shared libraries. +- case $host_os in +- aix[3-9]*) +- # On AIX/PPC, the GNU linker is very broken +- if test "$host_cpu" != ia64; then +- ld_shlibs_F77=no +- cat <&2 + +-*** Warning: the GNU linker, at least up to release 2.9.1, is reported +-*** to be unable to reliably create shared libraries on AIX. +-*** Therefore, libtool is disabling shared libraries support. If you +-*** really care for shared libraries, you may want to modify your PATH +-*** so that a non-GNU linker is found, and then restart. ++fi ++{ echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5 ++echo "${ECHO_T}$lt_cv_dlopen_self" >&6; } + +-EOF +- fi +- ;; ++ if test "x$lt_cv_dlopen_self" = xyes; then ++ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" ++ { echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5 ++echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6; } ++if test "${lt_cv_dlopen_self_static+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test "$cross_compiling" = yes; then : ++ lt_cv_dlopen_self_static=cross ++else ++ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 ++ lt_status=$lt_dlunknown ++ cat > conftest.$ac_ext <<_LT_EOF ++#line 12268 "configure" ++#include "confdefs.h" + +- amigaos*) +- archive_cmds_F77='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' +- hardcode_libdir_flag_spec_F77='-L$libdir' +- hardcode_minus_L_F77=yes +- +- # Samuel A. Falvo II reports +- # that the semantics of dynamic libraries on AmigaOS, at least up +- # to version 4, is to share data among multiple programs linked +- # with the same dynamic library. Since this doesn't match the +- # behavior of shared libraries on other platforms, we can't use +- # them. +- ld_shlibs_F77=no +- ;; ++#if HAVE_DLFCN_H ++#include ++#endif + +- beos*) +- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then +- allow_undefined_flag_F77=unsupported +- # Joseph Beckenbach says some releases of gcc +- # support --undefined. This deserves some investigation. FIXME +- archive_cmds_F77='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- else +- ld_shlibs_F77=no +- fi +- ;; ++#include + +- cygwin* | mingw* | pw32*) +- # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, F77) is actually meaningless, +- # as there is no search path for DLLs. +- hardcode_libdir_flag_spec_F77='-L$libdir' +- allow_undefined_flag_F77=unsupported +- always_export_symbols_F77=no +- enable_shared_with_static_runtimes_F77=yes +- export_symbols_cmds_F77='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' ++#ifdef RTLD_GLOBAL ++# define LT_DLGLOBAL RTLD_GLOBAL ++#else ++# ifdef DL_GLOBAL ++# define LT_DLGLOBAL DL_GLOBAL ++# else ++# define LT_DLGLOBAL 0 ++# endif ++#endif + +- if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then +- archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' +- # If the export-symbols file already is a .def file (1st line +- # is EXPORTS), use it as is; otherwise, prepend... +- archive_expsym_cmds_F77='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then +- cp $export_symbols $output_objdir/$soname.def; +- else +- echo EXPORTS > $output_objdir/$soname.def; +- cat $export_symbols >> $output_objdir/$soname.def; +- fi~ +- $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' +- else +- ld_shlibs_F77=no +- fi +- ;; ++/* We may have to define LT_DLLAZY_OR_NOW in the command line if we ++ find out it does not work in some platform. */ ++#ifndef LT_DLLAZY_OR_NOW ++# ifdef RTLD_LAZY ++# define LT_DLLAZY_OR_NOW RTLD_LAZY ++# else ++# ifdef DL_LAZY ++# define LT_DLLAZY_OR_NOW DL_LAZY ++# else ++# ifdef RTLD_NOW ++# define LT_DLLAZY_OR_NOW RTLD_NOW ++# else ++# ifdef DL_NOW ++# define LT_DLLAZY_OR_NOW DL_NOW ++# else ++# define LT_DLLAZY_OR_NOW 0 ++# endif ++# endif ++# endif ++# endif ++#endif + +- interix[3-9]*) +- hardcode_direct_F77=no +- hardcode_shlibpath_var_F77=no +- hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir' +- export_dynamic_flag_spec_F77='${wl}-E' +- # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. +- # Instead, shared libraries are loaded at an image base (0x10000000 by +- # default) and relocated if they conflict, which is a slow very memory +- # consuming and fragmenting process. To avoid this, we pick a random, +- # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link +- # time. Moving up from 0x10000000 also allows more sbrk(2) space. +- archive_cmds_F77='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' +- archive_expsym_cmds_F77='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' +- ;; ++#ifdef __cplusplus ++extern "C" void exit (int); ++#endif + +- gnu* | linux* | k*bsd*-gnu) +- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then +- tmp_addflag= +- case $cc_basename,$host_cpu in +- pgcc*) # Portland Group C compiler +- whole_archive_flag_spec_F77='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' +- tmp_addflag=' $pic_flag' +- ;; +- pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers +- whole_archive_flag_spec_F77='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' +- tmp_addflag=' $pic_flag -Mnomain' ;; +- ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 +- tmp_addflag=' -i_dynamic' ;; +- efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 +- tmp_addflag=' -i_dynamic -nofor_main' ;; +- ifc* | ifort*) # Intel Fortran compiler +- tmp_addflag=' -nofor_main' ;; +- esac +- case `$CC -V 2>&1 | sed 5q` in +- *Sun\ C*) # Sun C 5.9 +- whole_archive_flag_spec_F77='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' +- tmp_sharedflag='-G' ;; +- *Sun\ F*) # Sun Fortran 8.3 +- tmp_sharedflag='-G' ;; +- *) +- tmp_sharedflag='-shared' ;; +- esac +- archive_cmds_F77='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++void fnord() { int i=42;} ++int main () ++{ ++ void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); ++ int status = $lt_dlunknown; + +- if test $supports_anon_versioning = yes; then +- archive_expsym_cmds_F77='$echo "{ global:" > $output_objdir/$libname.ver~ +- cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ +- $echo "local: *; };" >> $output_objdir/$libname.ver~ +- $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' +- fi +- else +- ld_shlibs_F77=no +- fi +- ;; ++ if (self) ++ { ++ if (dlsym (self,"fnord")) status = $lt_dlno_uscore; ++ else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; ++ /* dlclose (self); */ ++ } ++ else ++ puts (dlerror ()); + +- netbsd*) +- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then +- archive_cmds_F77='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' +- wlarc= +- else +- archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' +- fi +- ;; ++ exit (status); ++} ++_LT_EOF ++ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ++ (eval $ac_link) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then ++ (./conftest; exit; ) >&5 2>/dev/null ++ lt_status=$? ++ case x$lt_status in ++ x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; ++ x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;; ++ x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;; ++ esac ++ else : ++ # compilation failed ++ lt_cv_dlopen_self_static=no ++ fi ++fi ++rm -fr conftest* + +- solaris*) +- if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then +- ld_shlibs_F77=no +- cat <&2 + +-*** Warning: The releases 2.8.* of the GNU linker cannot reliably +-*** create shared libraries on Solaris systems. Therefore, libtool +-*** is disabling shared libraries support. We urge you to upgrade GNU +-*** binutils to release 2.9.1 or newer. Another option is to modify +-*** your PATH or compiler configuration so that the native linker is +-*** used, and then restart. ++fi ++{ echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5 ++echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6; } ++ fi + +-EOF +- elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then +- archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' +- else +- ld_shlibs_F77=no +- fi +- ;; ++ CPPFLAGS="$save_CPPFLAGS" ++ LDFLAGS="$save_LDFLAGS" ++ LIBS="$save_LIBS" ++ ;; ++ esac ++ ++ case $lt_cv_dlopen_self in ++ yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; ++ *) enable_dlopen_self=unknown ;; ++ esac ++ ++ case $lt_cv_dlopen_self_static in ++ yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; ++ *) enable_dlopen_self_static=unknown ;; ++ esac ++fi + +- sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) +- case `$LD -v 2>&1` in +- *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) +- ld_shlibs_F77=no +- cat <<_LT_EOF 1>&2 + +-*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not +-*** reliably create shared libraries on SCO systems. Therefore, libtool +-*** is disabling shared libraries support. We urge you to upgrade GNU +-*** binutils to release 2.16.91.0.3 or newer. Another option is to modify +-*** your PATH or compiler configuration so that the native linker is +-*** used, and then restart. + +-_LT_EOF +- ;; +- *) +- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then +- hardcode_libdir_flag_spec_F77='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`' +- archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib' +- archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib' +- else +- ld_shlibs_F77=no +- fi +- ;; +- esac +- ;; + +- sunos4*) +- archive_cmds_F77='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' +- wlarc= +- hardcode_direct_F77=yes +- hardcode_shlibpath_var_F77=no +- ;; + +- *) +- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then +- archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' +- else +- ld_shlibs_F77=no +- fi +- ;; +- esac + +- if test "$ld_shlibs_F77" = no; then +- runpath_var= +- hardcode_libdir_flag_spec_F77= +- export_dynamic_flag_spec_F77= +- whole_archive_flag_spec_F77= +- fi +- else +- # PORTME fill in a description of your system's linker (not GNU ld) +- case $host_os in +- aix3*) +- allow_undefined_flag_F77=unsupported +- always_export_symbols_F77=yes +- archive_expsym_cmds_F77='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' +- # Note: this linker hardcodes the directories in LIBPATH if there +- # are no directories specified by -L. +- hardcode_minus_L_F77=yes +- if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then +- # Neither direct hardcoding nor static linking is supported with a +- # broken collect2. +- hardcode_direct_F77=unsupported +- fi +- ;; + +- aix[4-9]*) +- if test "$host_cpu" = ia64; then +- # On IA64, the linker does run time linking by default, so we don't +- # have to do anything special. +- aix_use_runtimelinking=no +- exp_sym_flag='-Bexport' +- no_entry_flag="" +- else +- # If we're using GNU nm, then we don't want the "-C" option. +- # -C means demangle to AIX nm, but means don't demangle with GNU nm +- if $NM -V 2>&1 | grep 'GNU' > /dev/null; then +- export_symbols_cmds_F77='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' +- else +- export_symbols_cmds_F77='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' +- fi +- aix_use_runtimelinking=no + +- # Test if we are trying to use run time linking or normal +- # AIX style linking. If -brtl is somewhere in LDFLAGS, we +- # need to do runtime linking. +- case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) +- for ld_flag in $LDFLAGS; do +- if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then +- aix_use_runtimelinking=yes +- break +- fi +- done +- ;; +- esac + +- exp_sym_flag='-bexport' +- no_entry_flag='-bnoentry' +- fi + +- # When large executables or shared objects are built, AIX ld can +- # have problems creating the table of contents. If linking a library +- # or program results in "error TOC overflow" add -mminimal-toc to +- # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not +- # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + +- archive_cmds_F77='' +- hardcode_direct_F77=yes +- hardcode_libdir_separator_F77=':' +- link_all_deplibs_F77=yes + +- if test "$GCC" = yes; then +- case $host_os in aix4.[012]|aix4.[012].*) +- # We only want to do this on AIX 4.2 and lower, the check +- # below for broken collect2 doesn't work under 4.3+ +- collect2name=`${CC} -print-prog-name=collect2` +- if test -f "$collect2name" && \ +- strings "$collect2name" | grep resolve_lib_name >/dev/null +- then +- # We have reworked collect2 +- : +- else +- # We have old collect2 +- hardcode_direct_F77=unsupported +- # It fails to find uninstalled libraries when the uninstalled +- # path is not listed in the libpath. Setting hardcode_minus_L +- # to unsupported forces relinking +- hardcode_minus_L_F77=yes +- hardcode_libdir_flag_spec_F77='-L$libdir' +- hardcode_libdir_separator_F77= +- fi +- ;; +- esac +- shared_flag='-shared' +- if test "$aix_use_runtimelinking" = yes; then +- shared_flag="$shared_flag "'${wl}-G' +- fi +- else +- # not using gcc +- if test "$host_cpu" = ia64; then +- # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release +- # chokes on -Wl,-G. The following line is correct: +- shared_flag='-G' +- else +- if test "$aix_use_runtimelinking" = yes; then +- shared_flag='${wl}-G' +- else +- shared_flag='${wl}-bM:SRE' +- fi +- fi +- fi + +- # It seems that -bexpall does not export symbols beginning with +- # underscore (_), so it is better to generate a list of symbols to export. +- always_export_symbols_F77=yes +- if test "$aix_use_runtimelinking" = yes; then +- # Warning - without using the other runtime loading flags (-brtl), +- # -berok will link without error, but may produce a broken library. +- allow_undefined_flag_F77='-berok' +- # Determine the default libpath from the value encoded in an empty executable. +- cat >conftest.$ac_ext <<_ACEOF +- program main + +- end +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_f77_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then + +-lt_aix_libpath_sed=' +- /Import File Strings/,/^$/ { +- /^0/ { +- s/^0 *\(.*\)$/\1/ +- p +- } +- }' +-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +-# Check for a 64-bit object if we didn't find anything. +-if test -z "$aix_libpath"; then +- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +-fi +-else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 + + ++striplib= ++old_striplib= ++{ echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5 ++echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6; } ++if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then ++ test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" ++ test -z "$striplib" && striplib="$STRIP --strip-unneeded" ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++else ++# FIXME - insert some real tests, host_os isn't really good enough ++ case $host_os in ++ darwin*) ++ if test -n "$STRIP" ; then ++ striplib="$STRIP -x" ++ old_striplib="$STRIP -S" ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++ else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++ fi ++ ;; ++ *) ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++ ;; ++ esac + fi + +-rm -rf conftest.dSYM +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext +-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + +- hardcode_libdir_flag_spec_F77='${wl}-blibpath:$libdir:'"$aix_libpath" +- archive_expsym_cmds_F77="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" +- else +- if test "$host_cpu" = ia64; then +- hardcode_libdir_flag_spec_F77='${wl}-R $libdir:/usr/lib:/lib' +- allow_undefined_flag_F77="-z nodefs" +- archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" +- else +- # Determine the default libpath from the value encoded in an empty executable. +- cat >conftest.$ac_ext <<_ACEOF +- program main + +- end +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_f77_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then + +-lt_aix_libpath_sed=' +- /Import File Strings/,/^$/ { +- /^0/ { +- s/^0 *\(.*\)$/\1/ +- p +- } +- }' +-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +-# Check for a 64-bit object if we didn't find anything. +-if test -z "$aix_libpath"; then +- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +-fi +-else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 + + +-fi + +-rm -rf conftest.dSYM +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext +-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + +- hardcode_libdir_flag_spec_F77='${wl}-blibpath:$libdir:'"$aix_libpath" +- # Warning - without using the other run time loading flags, +- # -berok will link without error, but may produce a broken library. +- no_undefined_flag_F77=' ${wl}-bernotok' +- allow_undefined_flag_F77=' ${wl}-berok' +- # Exported symbols can be pulled into shared objects from archives +- whole_archive_flag_spec_F77='$convenience' +- archive_cmds_need_lc_F77=yes +- # This is similar to how AIX traditionally builds its shared libraries. +- archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' +- fi +- fi +- ;; + +- amigaos*) +- archive_cmds_F77='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' +- hardcode_libdir_flag_spec_F77='-L$libdir' +- hardcode_minus_L_F77=yes +- # see comment about different semantics on the GNU ld section +- ld_shlibs_F77=no +- ;; + +- bsdi[45]*) +- export_dynamic_flag_spec_F77=-rdynamic +- ;; + +- cygwin* | mingw* | pw32*) +- # When not using gcc, we currently assume that we are using +- # Microsoft Visual C++. +- # hardcode_libdir_flag_spec is actually meaningless, as there is +- # no search path for DLLs. +- hardcode_libdir_flag_spec_F77=' ' +- allow_undefined_flag_F77=unsupported +- # Tell ltmain to make .lib files, not .a files. +- libext=lib +- # Tell ltmain to make .dll files, not .so files. +- shrext_cmds=".dll" +- # FIXME: Setting linknames here is a bad hack. +- archive_cmds_F77='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames=' +- # The linker will automatically build a .lib file if we build a DLL. +- old_archive_From_new_cmds_F77='true' +- # FIXME: Should let the user specify the lib program. +- old_archive_cmds_F77='lib -OUT:$oldlib$oldobjs$old_deplibs' +- fix_srcfile_path_F77='`cygpath -w "$srcfile"`' +- enable_shared_with_static_runtimes_F77=yes +- ;; + +- darwin* | rhapsody*) +- case $host_os in +- rhapsody* | darwin1.[012]) +- allow_undefined_flag_F77='${wl}-undefined ${wl}suppress' +- ;; +- *) # Darwin 1.3 on +- if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then +- allow_undefined_flag_F77='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' +- else +- case ${MACOSX_DEPLOYMENT_TARGET} in +- 10.[012]) +- allow_undefined_flag_F77='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' +- ;; +- 10.*) +- allow_undefined_flag_F77='${wl}-undefined ${wl}dynamic_lookup' +- ;; +- esac +- fi +- ;; +- esac +- archive_cmds_need_lc_F77=no +- hardcode_direct_F77=no +- hardcode_automatic_F77=yes +- hardcode_shlibpath_var_F77=unsupported +- whole_archive_flag_spec_F77='' +- link_all_deplibs_F77=yes +- if test "$GCC" = yes ; then +- output_verbose_link_cmd='echo' +- archive_cmds_F77="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" +- module_cmds_F77="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" +- archive_expsym_cmds_F77="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" +- module_expsym_cmds_F77="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" +- else +- case $cc_basename in +- xlc*) +- output_verbose_link_cmd='echo' +- archive_cmds_F77='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring' +- module_cmds_F77='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' +- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds +- archive_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' +- module_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' +- ;; +- *) +- ld_shlibs_F77=no +- ;; +- esac ++ # Report which library types will actually be built ++ { echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5 ++echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6; } ++ { echo "$as_me:$LINENO: result: $can_build_shared" >&5 ++echo "${ECHO_T}$can_build_shared" >&6; } ++ ++ { echo "$as_me:$LINENO: checking whether to build shared libraries" >&5 ++echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6; } ++ test "$can_build_shared" = "no" && enable_shared=no ++ ++ # On AIX, shared libraries and static libraries use the same namespace, and ++ # are all built from PIC. ++ case $host_os in ++ aix3*) ++ test "$enable_shared" = yes && enable_static=no ++ if test -n "$RANLIB"; then ++ archive_cmds="$archive_cmds~\$RANLIB \$lib" ++ postinstall_cmds='$RANLIB $lib' + fi +- ;; ++ ;; + +- dgux*) +- archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- hardcode_libdir_flag_spec_F77='-L$libdir' +- hardcode_shlibpath_var_F77=no +- ;; ++ aix[4-9]*) ++ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then ++ test "$enable_shared" = yes && enable_static=no ++ fi ++ ;; ++ esac ++ { echo "$as_me:$LINENO: result: $enable_shared" >&5 ++echo "${ECHO_T}$enable_shared" >&6; } + +- freebsd1*) +- ld_shlibs_F77=no +- ;; ++ { echo "$as_me:$LINENO: checking whether to build static libraries" >&5 ++echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6; } ++ # Make sure either enable_shared or enable_static is yes. ++ test "$enable_shared" = yes || enable_static=yes ++ { echo "$as_me:$LINENO: result: $enable_static" >&5 ++echo "${ECHO_T}$enable_static" >&6; } + +- # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor +- # support. Future versions do this automatically, but an explicit c++rt0.o +- # does not break anything, and helps significantly (at the cost of a little +- # extra space). +- freebsd2.2*) +- archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' +- hardcode_libdir_flag_spec_F77='-R$libdir' +- hardcode_direct_F77=yes +- hardcode_shlibpath_var_F77=no +- ;; + +- # Unfortunately, older versions of FreeBSD 2 do not have this feature. +- freebsd2*) +- archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' +- hardcode_direct_F77=yes +- hardcode_minus_L_F77=yes +- hardcode_shlibpath_var_F77=no +- ;; + +- # FreeBSD 3 and greater uses gcc -shared to do shared libraries. +- freebsd* | dragonfly*) +- archive_cmds_F77='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' +- hardcode_libdir_flag_spec_F77='-R$libdir' +- hardcode_direct_F77=yes +- hardcode_shlibpath_var_F77=no +- ;; + +- hpux9*) +- if test "$GCC" = yes; then +- archive_cmds_F77='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' +- else +- archive_cmds_F77='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' +- fi +- hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir' +- hardcode_libdir_separator_F77=: +- hardcode_direct_F77=yes ++fi ++ac_ext=c ++ac_cpp='$CPP $CPPFLAGS' ++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_c_compiler_gnu + +- # hardcode_minus_L: Not really in the search PATH, +- # but as the default location of the library. +- hardcode_minus_L_F77=yes +- export_dynamic_flag_spec_F77='${wl}-E' +- ;; ++CC="$lt_save_CC" + +- hpux10*) +- if test "$GCC" = yes -a "$with_gnu_ld" = no; then +- archive_cmds_F77='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' +- else +- archive_cmds_F77='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' +- fi +- if test "$with_gnu_ld" = no; then +- hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir' +- hardcode_libdir_separator_F77=: + +- hardcode_direct_F77=yes +- export_dynamic_flag_spec_F77='${wl}-E' + +- # hardcode_minus_L: Not really in the search PATH, +- # but as the default location of the library. +- hardcode_minus_L_F77=yes +- fi +- ;; + +- hpux11*) +- if test "$GCC" = yes -a "$with_gnu_ld" = no; then +- case $host_cpu in +- hppa*64*) +- archive_cmds_F77='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' +- ;; +- ia64*) +- archive_cmds_F77='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' +- ;; +- *) +- archive_cmds_F77='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' +- ;; +- esac +- else +- case $host_cpu in +- hppa*64*) +- archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' +- ;; +- ia64*) +- archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' +- ;; +- *) +- archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' +- ;; +- esac +- fi +- if test "$with_gnu_ld" = no; then +- hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir' +- hardcode_libdir_separator_F77=: + +- case $host_cpu in +- hppa*64*|ia64*) +- hardcode_libdir_flag_spec_ld_F77='+b $libdir' +- hardcode_direct_F77=no +- hardcode_shlibpath_var_F77=no +- ;; +- *) +- hardcode_direct_F77=yes +- export_dynamic_flag_spec_F77='${wl}-E' + +- # hardcode_minus_L: Not really in the search PATH, +- # but as the default location of the library. +- hardcode_minus_L_F77=yes +- ;; +- esac +- fi +- ;; + +- irix5* | irix6* | nonstopux*) +- if test "$GCC" = yes; then +- archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' +- else +- archive_cmds_F77='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' +- hardcode_libdir_flag_spec_ld_F77='-rpath $libdir' +- fi +- hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir' +- hardcode_libdir_separator_F77=: +- link_all_deplibs_F77=yes +- ;; + +- netbsd*) +- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then +- archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out +- else +- archive_cmds_F77='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF +- fi +- hardcode_libdir_flag_spec_F77='-R$libdir' +- hardcode_direct_F77=yes +- hardcode_shlibpath_var_F77=no +- ;; + +- newsos6) +- archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- hardcode_direct_F77=yes +- hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir' +- hardcode_libdir_separator_F77=: +- hardcode_shlibpath_var_F77=no +- ;; + +- openbsd*) +- if test -f /usr/libexec/ld.so; then +- hardcode_direct_F77=yes +- hardcode_shlibpath_var_F77=no +- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then +- archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' +- archive_expsym_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' +- hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir' +- export_dynamic_flag_spec_F77='${wl}-E' +- else +- case $host_os in +- openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) +- archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' +- hardcode_libdir_flag_spec_F77='-R$libdir' +- ;; +- *) +- archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' +- hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir' +- ;; +- esac +- fi +- else +- ld_shlibs_F77=no +- fi +- ;; + +- os2*) +- hardcode_libdir_flag_spec_F77='-L$libdir' +- hardcode_minus_L_F77=yes +- allow_undefined_flag_F77=unsupported +- archive_cmds_F77='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' +- old_archive_From_new_cmds_F77='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' +- ;; + +- osf3*) +- if test "$GCC" = yes; then +- allow_undefined_flag_F77=' ${wl}-expect_unresolved ${wl}\*' +- archive_cmds_F77='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' +- else +- allow_undefined_flag_F77=' -expect_unresolved \*' +- archive_cmds_F77='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' +- fi +- hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir' +- hardcode_libdir_separator_F77=: +- ;; + +- osf4* | osf5*) # as osf3* with the addition of -msym flag +- if test "$GCC" = yes; then +- allow_undefined_flag_F77=' ${wl}-expect_unresolved ${wl}\*' +- archive_cmds_F77='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' +- hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir' +- else +- allow_undefined_flag_F77=' -expect_unresolved \*' +- archive_cmds_F77='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' +- archive_expsym_cmds_F77='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ +- $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp' ++ ac_config_commands="$ac_config_commands libtool" + +- # Both c and cxx compiler support -rpath directly +- hardcode_libdir_flag_spec_F77='-rpath $libdir' +- fi +- hardcode_libdir_separator_F77=: +- ;; + +- solaris*) +- no_undefined_flag_F77=' -z text' +- if test "$GCC" = yes; then +- wlarc='${wl}' +- archive_cmds_F77='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' +- archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ +- $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp' +- else +- wlarc='' +- archive_cmds_F77='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' +- archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ +- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' +- fi +- hardcode_libdir_flag_spec_F77='-R$libdir' +- hardcode_shlibpath_var_F77=no +- case $host_os in +- solaris2.[0-5] | solaris2.[0-5].*) ;; +- *) +- # The compiler driver will combine and reorder linker options, +- # but understands `-z linker_flag'. GCC discards it without `$wl', +- # but is careful enough not to reorder. +- # Supported since Solaris 2.6 (maybe 2.5.1?) +- if test "$GCC" = yes; then +- whole_archive_flag_spec_F77='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' +- else +- whole_archive_flag_spec_F77='-z allextract$convenience -z defaultextract' +- fi +- ;; +- esac +- link_all_deplibs_F77=yes +- ;; + +- sunos4*) +- if test "x$host_vendor" = xsequent; then +- # Use $CC to link under sequent, because it throws in some extra .o +- # files that make .init and .fini sections work. +- archive_cmds_F77='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' +- else +- archive_cmds_F77='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' +- fi +- hardcode_libdir_flag_spec_F77='-L$libdir' +- hardcode_direct_F77=yes +- hardcode_minus_L_F77=yes +- hardcode_shlibpath_var_F77=no +- ;; + +- sysv4) +- case $host_vendor in +- sni) +- archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- hardcode_direct_F77=yes # is this really true??? +- ;; +- siemens) +- ## LD is ld it makes a PLAMLIB +- ## CC just makes a GrossModule. +- archive_cmds_F77='$LD -G -o $lib $libobjs $deplibs $linker_flags' +- reload_cmds_F77='$CC -r -o $output$reload_objs' +- hardcode_direct_F77=no +- ;; +- motorola) +- archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- hardcode_direct_F77=no #Motorola manual says yes, but my tests say they lie +- ;; +- esac +- runpath_var='LD_RUN_PATH' +- hardcode_shlibpath_var_F77=no +- ;; ++# Only expand once: + +- sysv4.3*) +- archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- hardcode_shlibpath_var_F77=no +- export_dynamic_flag_spec_F77='-Bexport' +- ;; + +- sysv4*MP*) +- if test -d /usr/nec; then +- archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- hardcode_shlibpath_var_F77=no +- runpath_var=LD_RUN_PATH +- hardcode_runpath_var=yes +- ld_shlibs_F77=yes +- fi +- ;; ++# Extract the first word of "glib-genmarshal", so it can be a program name with args. ++set dummy glib-genmarshal; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_path_GLIB_GENMARSHAL+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ case $GLIB_GENMARSHAL in ++ [\\/]* | ?:[\\/]*) ++ ac_cv_path_GLIB_GENMARSHAL="$GLIB_GENMARSHAL" # Let the user override the test with a path. ++ ;; ++ *) ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_path_GLIB_GENMARSHAL="$as_dir/$ac_word$ac_exec_ext" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS + +- sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) +- no_undefined_flag_F77='${wl}-z,text' +- archive_cmds_need_lc_F77=no +- hardcode_shlibpath_var_F77=no +- runpath_var='LD_RUN_PATH' ++ ;; ++esac ++fi ++GLIB_GENMARSHAL=$ac_cv_path_GLIB_GENMARSHAL ++if test -n "$GLIB_GENMARSHAL"; then ++ { echo "$as_me:$LINENO: result: $GLIB_GENMARSHAL" >&5 ++echo "${ECHO_T}$GLIB_GENMARSHAL" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi + +- if test "$GCC" = yes; then +- archive_cmds_F77='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' +- archive_expsym_cmds_F77='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' +- else +- archive_cmds_F77='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' +- archive_expsym_cmds_F77='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' +- fi +- ;; + +- sysv5* | sco3.2v5* | sco5v6*) +- # Note: We can NOT use -z defs as we might desire, because we do not +- # link with -lc, and that would cause any symbols used from libc to +- # always be unresolved, which means just about no library would +- # ever link correctly. If we're not using GNU ld we use -z text +- # though, which does catch some bad symbols but isn't as heavy-handed +- # as -z defs. +- no_undefined_flag_F77='${wl}-z,text' +- allow_undefined_flag_F77='${wl}-z,nodefs' +- archive_cmds_need_lc_F77=no +- hardcode_shlibpath_var_F77=no +- hardcode_libdir_flag_spec_F77='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' +- hardcode_libdir_separator_F77=':' +- link_all_deplibs_F77=yes +- export_dynamic_flag_spec_F77='${wl}-Bexport' +- runpath_var='LD_RUN_PATH' + +- if test "$GCC" = yes; then +- archive_cmds_F77='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' +- archive_expsym_cmds_F77='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' +- else +- archive_cmds_F77='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' +- archive_expsym_cmds_F77='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' +- fi +- ;; ++ACLOCAL_AMFLAGS="\${ACLOCAL_FLAGS}" + +- uts4*) +- archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- hardcode_libdir_flag_spec_F77='-L$libdir' +- hardcode_shlibpath_var_F77=no +- ;; +- +- *) +- ld_shlibs_F77=no +- ;; +- esac +- fi +- +-{ $as_echo "$as_me:$LINENO: result: $ld_shlibs_F77" >&5 +-$as_echo "$ld_shlibs_F77" >&6; } +-test "$ld_shlibs_F77" = no && can_build_shared=no + +-# +-# Do we need to explicitly link libc? +-# +-case "x$archive_cmds_need_lc_F77" in +-x|xyes) +- # Assume -lc should be added +- archive_cmds_need_lc_F77=yes +- +- if test "$enable_shared" = yes && test "$GCC" = yes; then +- case $archive_cmds_F77 in +- *'~'*) +- # FIXME: we may have to deal with multi-command sequences. +- ;; +- '$CC '*) +- # Test whether the compiler implicitly links with -lc since on some +- # systems, -lgcc has to come before -lc. If gcc already passes -lc +- # to ld, don't add -lc before -lgcc. +- { $as_echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 +-$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; } +- $rm conftest* +- echo "$lt_simple_compile_test_code" > conftest.$ac_ext + +- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>&5 +- ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } 2>conftest.err; then +- soname=conftest +- lib=conftest +- libobjs=conftest.$ac_objext +- deplibs= +- wl=$lt_prog_compiler_wl_F77 +- pic_flag=$lt_prog_compiler_pic_F77 +- compiler_flags=-v +- linker_flags=-v +- verstring= +- output_objdir=. +- libname=conftest +- lt_save_allow_undefined_flag=$allow_undefined_flag_F77 +- allow_undefined_flag_F77= +- if { (eval echo "$as_me:$LINENO: \"$archive_cmds_F77 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5 +- (eval $archive_cmds_F77 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5 +- ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } +- then +- archive_cmds_need_lc_F77=no +- else +- archive_cmds_need_lc_F77=yes +- fi +- allow_undefined_flag_F77=$lt_save_allow_undefined_flag +- else +- cat conftest.err 1>&5 +- fi +- $rm conftest* +- { $as_echo "$as_me:$LINENO: result: $archive_cmds_need_lc_F77" >&5 +-$as_echo "$archive_cmds_need_lc_F77" >&6; } +- ;; +- esac +- fi +- ;; +-esac + +-{ $as_echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 +-$as_echo_n "checking dynamic linker characteristics... " >&6; } +-library_names_spec= +-libname_spec='lib$name' +-soname_spec= +-shrext_cmds=".so" +-postinstall_cmds= +-postuninstall_cmds= +-finish_cmds= +-finish_eval= +-shlibpath_var= +-shlibpath_overrides_runpath=unknown +-version_type=none +-dynamic_linker="$host_os ld.so" +-sys_lib_dlsearch_path_spec="/lib /usr/lib" + +-need_lib_prefix=unknown +-hardcode_into_libs=no ++ if test $USE_MAINTAINER_MODE = yes; then ++ DISABLE_DEPRECATED="-DG_DISABLE_DEPRECATED -DGDK_DISABLE_DEPRECATED -DGDK_PIXBUF_DISABLE_DEPRECATED -DPANGO_DISABLE_DEPRECATED -DGTK_DISABLE_DEPRECATED -DGCONF_DISABLE_DEPRECATED -DBONOBO_DISABLE_DEPRECATED -DBONOBO_UI_DISABLE_DEPRECATED -DGNOME_VFS_DISABLE_DEPRECATED -DGNOME_DISABLE_DEPRECATED -DLIBGLADE_DISABLE_DEPRECATED" ++ else ++ DISABLE_DEPRECATED="" ++ fi + +-# when you set need_version to no, make sure it does not cause -set_version +-# flags to be left without arguments +-need_version=unknown + +-case $host_os in +-aix3*) +- version_type=linux +- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' +- shlibpath_var=LIBPATH + +- # AIX 3 has no versioning support, so we append a major version to the name. +- soname_spec='${libname}${release}${shared_ext}$major' +- ;; + +-aix[4-9]*) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- hardcode_into_libs=yes +- if test "$host_cpu" = ia64; then +- # AIX 5 supports IA64 +- library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' +- shlibpath_var=LD_LIBRARY_PATH +- else +- # With GCC up to 2.95.x, collect2 would create an import file +- # for dependence libraries. The import file would start with +- # the line `#! .'. This would cause the generated library to +- # depend on `.', always an invalid library. This was fixed in +- # development snapshots of GCC prior to 3.0. +- case $host_os in +- aix4 | aix4.[01] | aix4.[01].*) +- if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' +- echo ' yes ' +- echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then +- : +- else +- can_build_shared=no +- fi +- ;; +- esac +- # AIX (on Power*) has no versioning support, so currently we can not hardcode correct +- # soname into executable. Probably we can add versioning support to +- # collect2, so additional links can be useful in future. +- if test "$aix_use_runtimelinking" = yes; then +- # If using run time linking (on AIX 4.2 or later) use lib.so +- # instead of lib.a to let people know that these are not +- # typical AIX shared libraries. +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- else +- # We preserve .a as extension for shared libraries through AIX4.2 +- # and later when we are not doing run time linking. +- library_names_spec='${libname}${release}.a $libname.a' +- soname_spec='${libname}${release}${shared_ext}$major' +- fi +- shlibpath_var=LIBPATH +- fi +- ;; ++# Check whether --with-at-spi-registryd-directory was given. ++if test "${with_at_spi_registryd_directory+set}" = set; then ++ withval=$with_at_spi_registryd_directory; ++else ++ with_at_spi_registryd_directory="\${libexecdir}" ++fi + +-amigaos*) +- library_names_spec='$libname.ixlibrary $libname.a' +- # Create ${libname}_ixlibrary.a entries in /sys/libs. +- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' +- ;; + +-beos*) +- library_names_spec='${libname}${shared_ext}' +- dynamic_linker="$host_os ld.so" +- shlibpath_var=LIBRARY_PATH +- ;; ++AT_SPI_REGISTRYD_DIR=$with_at_spi_registryd_directory + +-bsdi[45]*) +- version_type=linux +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' +- shlibpath_var=LD_LIBRARY_PATH +- sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" +- sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" +- # the default ld.so.conf also contains /usr/contrib/lib and +- # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow +- # libtool to hard-code these into programs +- ;; + +-cygwin* | mingw* | pw32*) +- version_type=windows +- shrext_cmds=".dll" +- need_version=no +- need_lib_prefix=no + +- case $GCC,$host_os in +- yes,cygwin* | yes,mingw* | yes,pw32*) +- library_names_spec='$libname.dll.a' +- # DLL is installed to $(libdir)/../bin by postinstall_cmds +- postinstall_cmds='base_file=`basename \${file}`~ +- dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ +- dldir=$destdir/`dirname \$dlpath`~ +- test -d \$dldir || mkdir -p \$dldir~ +- $install_prog $dir/$dlname \$dldir/$dlname~ +- chmod a+x \$dldir/$dlname' +- postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ +- dlpath=$dir/\$dldll~ +- $rm \$dlpath' +- shlibpath_overrides_runpath=yes + +- case $host_os in +- cygwin*) +- # Cygwin DLLs use 'cyg' prefix rather than 'lib' +- soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' +- sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" +- ;; +- mingw*) +- # MinGW DLLs use traditional 'lib' prefix +- soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' +- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` +- if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then +- # It is most probably a Windows format PATH printed by +- # mingw gcc, but we are running on Cygwin. Gcc prints its search +- # path with ; separators, and with drive letters. We can handle the +- # drive letters (cygwin fileutils understands them), so leave them, +- # especially as we might pass files found there to a mingw objdump, +- # which wouldn't understand a cygwinified path. Ahh. +- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` +- else +- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` +- fi +- ;; +- pw32*) +- # pw32 DLLs use 'pw' prefix rather than 'lib' +- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' +- ;; +- esac +- ;; ++ # Check whether --enable-compile-warnings was given. ++if test "${enable_compile_warnings+set}" = set; then ++ enableval=$enable_compile_warnings; ++else ++ enable_compile_warnings="maximum" ++fi + +- *) +- library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' +- ;; +- esac +- dynamic_linker='Win32 ld.exe' +- # FIXME: first we should search . and the directory the executable is in +- shlibpath_var=PATH +- ;; + +-darwin* | rhapsody*) +- dynamic_linker="$host_os dyld" +- version_type=darwin +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext' +- soname_spec='${libname}${release}${major}$shared_ext' +- shlibpath_overrides_runpath=yes +- shlibpath_var=DYLD_LIBRARY_PATH +- shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' ++ warnCFLAGS= ++ if test "x$GCC" != xyes; then ++ enable_compile_warnings=no ++ fi + +- sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' +- ;; ++ warning_flags= ++ realsave_CFLAGS="$CFLAGS" + +-dgux*) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- ;; ++ case "$enable_compile_warnings" in ++ no) ++ warning_flags= ++ ;; ++ minimum) ++ warning_flags="-Wall" ++ ;; ++ yes) ++ warning_flags="-Wall -Wmissing-prototypes" ++ ;; ++ maximum|error) ++ warning_flags="-Wall -Wmissing-prototypes -Wnested-externs -Wpointer-arith" ++ CFLAGS="$warning_flags $CFLAGS" ++ for option in -Wno-sign-compare; do ++ SAVE_CFLAGS="$CFLAGS" ++ CFLAGS="$CFLAGS $option" ++ { echo "$as_me:$LINENO: checking whether gcc understands $option" >&5 ++echo $ECHO_N "checking whether gcc understands $option... $ECHO_C" >&6; } ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ + +-freebsd1*) +- dynamic_linker=no +- ;; ++int ++main () ++{ + +-freebsd* | dragonfly*) +- # DragonFly does not have aout. When/if they implement a new +- # versioning mechanism, adjust this. +- if test -x /usr/bin/objformat; then +- objformat=`/usr/bin/objformat` +- else +- case $host_os in +- freebsd[123]*) objformat=aout ;; +- *) objformat=elf ;; ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then ++ has_option=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ has_option=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++ CFLAGS="$SAVE_CFLAGS" ++ { echo "$as_me:$LINENO: result: $has_option" >&5 ++echo "${ECHO_T}$has_option" >&6; } ++ if test $has_option = yes; then ++ warning_flags="$warning_flags $option" ++ fi ++ unset has_option ++ unset SAVE_CFLAGS ++ done ++ unset option ++ if test "$enable_compile_warnings" = "error" ; then ++ warning_flags="$warning_flags -Werror" ++ fi ++ ;; ++ *) ++ { { echo "$as_me:$LINENO: error: Unknown argument '$enable_compile_warnings' to --enable-compile-warnings" >&5 ++echo "$as_me: error: Unknown argument '$enable_compile_warnings' to --enable-compile-warnings" >&2;} ++ { (exit 1); exit 1; }; } ++ ;; + esac +- fi +- version_type=freebsd-$objformat +- case $version_type in +- freebsd-elf*) +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' +- need_version=no +- need_lib_prefix=no +- ;; +- freebsd-*) +- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' +- need_version=yes +- ;; +- esac +- shlibpath_var=LD_LIBRARY_PATH +- case $host_os in +- freebsd2*) +- shlibpath_overrides_runpath=yes +- ;; +- freebsd3.[01]* | freebsdelf3.[01]*) +- shlibpath_overrides_runpath=yes +- hardcode_into_libs=yes +- ;; +- freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ +- freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) +- shlibpath_overrides_runpath=no +- hardcode_into_libs=yes +- ;; +- *) # from 4.6 on, and DragonFly +- shlibpath_overrides_runpath=yes +- hardcode_into_libs=yes +- ;; +- esac +- ;; ++ CFLAGS="$realsave_CFLAGS" ++ { echo "$as_me:$LINENO: checking what warning flags to pass to the C compiler" >&5 ++echo $ECHO_N "checking what warning flags to pass to the C compiler... $ECHO_C" >&6; } ++ { echo "$as_me:$LINENO: result: $warning_flags" >&5 ++echo "${ECHO_T}$warning_flags" >&6; } + +-gnu*) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- hardcode_into_libs=yes +- ;; ++ # Check whether --enable-iso-c was given. ++if test "${enable_iso_c+set}" = set; then ++ enableval=$enable_iso_c; ++else ++ enable_iso_c=no ++fi + +-hpux9* | hpux10* | hpux11*) +- # Give a soname corresponding to the major version so that dld.sl refuses to +- # link against other versions. +- version_type=sunos +- need_lib_prefix=no +- need_version=no +- case $host_cpu in +- ia64*) +- shrext_cmds='.so' +- hardcode_into_libs=yes +- dynamic_linker="$host_os dld.so" +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- if test "X$HPUX_IA64_MODE" = X32; then +- sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" +- else +- sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" +- fi +- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec +- ;; +- hppa*64*) +- shrext_cmds='.sl' +- hardcode_into_libs=yes +- dynamic_linker="$host_os dld.sl" +- shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH +- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" +- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec +- ;; +- *) +- shrext_cmds='.sl' +- dynamic_linker="$host_os dld.sl" +- shlibpath_var=SHLIB_PATH +- shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- ;; +- esac +- # HP-UX runs *really* slowly unless shared libraries are mode 555. +- postinstall_cmds='chmod 555 $lib' +- ;; + +-interix[3-9]*) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=no +- hardcode_into_libs=yes +- ;; ++ { echo "$as_me:$LINENO: checking what language compliance flags to pass to the C compiler" >&5 ++echo $ECHO_N "checking what language compliance flags to pass to the C compiler... $ECHO_C" >&6; } ++ complCFLAGS= ++ if test "x$enable_iso_c" != "xno"; then ++ if test "x$GCC" = "xyes"; then ++ case " $CFLAGS " in ++ *\ \ -ansi\ \ *) ;; ++ *) complCFLAGS="$complCFLAGS -ansi" ;; ++ esac ++ case " $CFLAGS " in ++ *\ \ -pedantic\ \ *) ;; ++ *) complCFLAGS="$complCFLAGS -pedantic" ;; ++ esac ++ fi ++ fi ++ { echo "$as_me:$LINENO: result: $complCFLAGS" >&5 ++echo "${ECHO_T}$complCFLAGS" >&6; } + +-irix5* | irix6* | nonstopux*) +- case $host_os in +- nonstopux*) version_type=nonstopux ;; +- *) +- if test "$lt_cv_prog_gnu_ld" = yes; then +- version_type=linux +- else +- version_type=irix +- fi ;; +- esac +- need_lib_prefix=no +- need_version=no +- soname_spec='${libname}${release}${shared_ext}$major' +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' +- case $host_os in +- irix5* | nonstopux*) +- libsuff= shlibsuff= +- ;; +- *) +- case $LD in # libtool.m4 will add one of these switches to LD +- *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") +- libsuff= shlibsuff= libmagic=32-bit;; +- *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") +- libsuff=32 shlibsuff=N32 libmagic=N32;; +- *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") +- libsuff=64 shlibsuff=64 libmagic=64-bit;; +- *) libsuff= shlibsuff= libmagic=never-match;; +- esac +- ;; +- esac +- shlibpath_var=LD_LIBRARY${shlibsuff}_PATH +- shlibpath_overrides_runpath=no +- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" +- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" +- hardcode_into_libs=yes +- ;; ++ WARN_CFLAGS="$warning_flags $complCFLAGS" + +-# No shared lib support for Linux oldld, aout, or coff. +-linux*oldld* | linux*aout* | linux*coff*) +- dynamic_linker=no +- ;; + +-# This must be Linux ELF. +-linux* | k*bsd*-gnu) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=no +- # This implies no fast_install, which is unacceptable. +- # Some rework will be needed to allow for fast_install +- # before this can be enabled. +- hardcode_into_libs=yes +- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" +- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" + +- # Append ld.so.conf contents to the search path +- if test -f /etc/ld.so.conf; then +- lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` +- sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra" +- fi ++# Check whether --enable-deprecations was given. ++if test "${enable_deprecations+set}" = set; then ++ enableval=$enable_deprecations; ++else ++ enable_deprecations=no ++fi + +- # We used to test for /lib/ld.so.1 and disable shared libraries on +- # powerpc, because MkLinux only supported shared libraries with the +- # GNU dynamic linker. Since this was broken with cross compilers, +- # most powerpc-linux boxes support dynamic linking these days and +- # people can always --disable-shared, the test was removed, and we +- # assume the GNU/Linux dynamic linker is in use. +- dynamic_linker='GNU/Linux ld.so' +- ;; + +-netbsd*) +- version_type=sunos +- need_lib_prefix=no +- need_version=no +- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' +- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' +- dynamic_linker='NetBSD (a.out) ld.so' +- else +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- dynamic_linker='NetBSD ld.elf_so' +- fi +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=yes +- hardcode_into_libs=yes +- ;; ++if test "x$enable_deprecations" = "xyes"; then ++ DISABLE_DEPRECATED_CFLAGS=$DISABLE_DEPRECATED + +-newsos6) +- version_type=linux +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=yes +- ;; ++fi + +-nto-qnx*) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=yes +- ;; +- +-openbsd*) +- version_type=sunos +- sys_lib_dlsearch_path_spec="/usr/lib" +- need_lib_prefix=no +- # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. +- case $host_os in +- openbsd3.3 | openbsd3.3.*) need_version=yes ;; +- *) need_version=no ;; +- esac +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' +- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' +- shlibpath_var=LD_LIBRARY_PATH +- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then +- case $host_os in +- openbsd2.[89] | openbsd2.[89].*) +- shlibpath_overrides_runpath=no +- ;; +- *) +- shlibpath_overrides_runpath=yes +- ;; +- esac +- else +- shlibpath_overrides_runpath=yes +- fi +- ;; +- +-os2*) +- libname_spec='$name' +- shrext_cmds=".dll" +- need_lib_prefix=no +- library_names_spec='$libname${shared_ext} $libname.a' +- dynamic_linker='OS/2 ld.exe' +- shlibpath_var=LIBPATH +- ;; ++GLIB_REQUIRED=2.16.0 ++LIBGNOMEUI_REQUIRED=2.2.0 ++GTK_REQUIRED=2.11.1 ++GLADE_REQUIRED=2.3.6 ++DBUS_GLIB_REQUIRED=0.76 ++POLKIT_GNOME_REQUIRED=0.7 + +-osf3* | osf4* | osf5*) +- version_type=osf +- need_lib_prefix=no +- need_version=no +- soname_spec='${libname}${release}${shared_ext}$major' +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- shlibpath_var=LD_LIBRARY_PATH +- sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" +- sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" +- ;; + +-rdos*) +- dynamic_linker=no +- ;; + +-solaris*) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=yes +- hardcode_into_libs=yes +- # ldd complains unless libraries are executable +- postinstall_cmds='chmod +x $lib' ++if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then ++ if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}pkg-config", so it can be a program name with args. ++set dummy ${ac_tool_prefix}pkg-config; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_path_PKG_CONFIG+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ case $PKG_CONFIG in ++ [\\/]* | ?:[\\/]*) ++ ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path. + ;; +- +-sunos4*) +- version_type=sunos +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' +- finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=yes +- if test "$with_gnu_ld" = yes; then +- need_lib_prefix=no ++ *) ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_path_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 + fi +- need_version=yes +- ;; +- +-sysv4 | sysv4.3*) +- version_type=linux +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- case $host_vendor in +- sni) +- shlibpath_overrides_runpath=no +- need_lib_prefix=no +- export_dynamic_flag_spec='${wl}-Blargedynsym' +- runpath_var=LD_RUN_PATH +- ;; +- siemens) +- need_lib_prefix=no +- ;; +- motorola) +- need_lib_prefix=no +- need_version=no +- shlibpath_overrides_runpath=no +- sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' +- ;; +- esac +- ;; ++done ++done ++IFS=$as_save_IFS + +-sysv4*MP*) +- if test -d /usr/nec ;then +- version_type=linux +- library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' +- soname_spec='$libname${shared_ext}.$major' +- shlibpath_var=LD_LIBRARY_PATH +- fi + ;; ++esac ++fi ++PKG_CONFIG=$ac_cv_path_PKG_CONFIG ++if test -n "$PKG_CONFIG"; then ++ { echo "$as_me:$LINENO: result: $PKG_CONFIG" >&5 ++echo "${ECHO_T}$PKG_CONFIG" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi + +-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) +- version_type=freebsd-elf +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- hardcode_into_libs=yes +- if test "$with_gnu_ld" = yes; then +- sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' +- shlibpath_overrides_runpath=no +- else +- sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' +- shlibpath_overrides_runpath=yes +- case $host_os in +- sco3.2v5*) +- sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" +- ;; +- esac +- fi +- sys_lib_dlsearch_path_spec='/usr/lib' +- ;; + +-uts4*) +- version_type=linux +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH ++fi ++if test -z "$ac_cv_path_PKG_CONFIG"; then ++ ac_pt_PKG_CONFIG=$PKG_CONFIG ++ # Extract the first word of "pkg-config", so it can be a program name with args. ++set dummy pkg-config; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_path_ac_pt_PKG_CONFIG+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ case $ac_pt_PKG_CONFIG in ++ [\\/]* | ?:[\\/]*) ++ ac_cv_path_ac_pt_PKG_CONFIG="$ac_pt_PKG_CONFIG" # Let the user override the test with a path. + ;; ++ *) ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_path_ac_pt_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS + +-*) +- dynamic_linker=no + ;; + esac +-{ $as_echo "$as_me:$LINENO: result: $dynamic_linker" >&5 +-$as_echo "$dynamic_linker" >&6; } +-test "$dynamic_linker" = no && can_build_shared=no +- +-if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then +- $as_echo_n "(cached) " >&6 +-else +- lt_cv_sys_lib_search_path_spec="$sys_lib_search_path_spec" + fi +- +-sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" +-if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ac_pt_PKG_CONFIG=$ac_cv_path_ac_pt_PKG_CONFIG ++if test -n "$ac_pt_PKG_CONFIG"; then ++ { echo "$as_me:$LINENO: result: $ac_pt_PKG_CONFIG" >&5 ++echo "${ECHO_T}$ac_pt_PKG_CONFIG" >&6; } + else +- lt_cv_sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec" ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + +-sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" +- +-variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +-if test "$GCC" = yes; then +- variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" +-fi +- +-{ $as_echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 +-$as_echo_n "checking how to hardcode library paths into programs... " >&6; } +-hardcode_action_F77= +-if test -n "$hardcode_libdir_flag_spec_F77" || \ +- test -n "$runpath_var_F77" || \ +- test "X$hardcode_automatic_F77" = "Xyes" ; then +- +- # We can hardcode non-existant directories. +- if test "$hardcode_direct_F77" != no && +- # If the only mechanism to avoid hardcoding is shlibpath_var, we +- # have to relink, otherwise we might link with an installed library +- # when we should be linking with a yet-to-be-installed one +- ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, F77)" != no && +- test "$hardcode_minus_L_F77" != no; then +- # Linking always hardcodes the temporary library directory. +- hardcode_action_F77=relink ++ if test "x$ac_pt_PKG_CONFIG" = x; then ++ PKG_CONFIG="" + else +- # We can link without hardcoding, and we can hardcode nonexisting dirs. +- hardcode_action_F77=immediate ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&5 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&2;} ++ac_tool_warned=yes ;; ++esac ++ PKG_CONFIG=$ac_pt_PKG_CONFIG + fi + else +- # We cannot hardcode anything, or else we can only hardcode existing +- # directories. +- hardcode_action_F77=unsupported ++ PKG_CONFIG="$ac_cv_path_PKG_CONFIG" + fi +-{ $as_echo "$as_me:$LINENO: result: $hardcode_action_F77" >&5 +-$as_echo "$hardcode_action_F77" >&6; } + +-if test "$hardcode_action_F77" = relink; then +- # Fast installation is not supported +- enable_fast_install=no +-elif test "$shlibpath_overrides_runpath" = yes || +- test "$enable_shared" = no; then +- # Fast installation is not necessary +- enable_fast_install=needless + fi ++if test -n "$PKG_CONFIG"; then ++ _pkg_min_version=0.9.0 ++ { echo "$as_me:$LINENO: checking pkg-config is at least version $_pkg_min_version" >&5 ++echo $ECHO_N "checking pkg-config is at least version $_pkg_min_version... $ECHO_C" >&6; } ++ if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++ else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++ PKG_CONFIG="" ++ fi + ++fi + +-# The else clause should only fire when bootstrapping the +-# libtool distribution, otherwise you forgot to ship ltmain.sh +-# with your package, and you will get complaints that there are +-# no rules to generate ltmain.sh. +-if test -f "$ltmain"; then +- # See if we are running on zsh, and set the options which allow our commands through +- # without removal of \ escapes. +- if test -n "${ZSH_VERSION+set}" ; then +- setopt NO_GLOB_SUBST +- fi +- # Now quote all the things that may contain metacharacters while being +- # careful not to overquote the AC_SUBSTed values. We take copies of the +- # variables and quote the copies for generation of the libtool script. +- for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \ +- SED SHELL STRIP \ +- libname_spec library_names_spec soname_spec extract_expsyms_cmds \ +- old_striplib striplib file_magic_cmd finish_cmds finish_eval \ +- deplibs_check_method reload_flag reload_cmds need_locks \ +- lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ +- lt_cv_sys_global_symbol_to_c_name_address \ +- sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ +- old_postinstall_cmds old_postuninstall_cmds \ +- compiler_F77 \ +- CC_F77 \ +- LD_F77 \ +- lt_prog_compiler_wl_F77 \ +- lt_prog_compiler_pic_F77 \ +- lt_prog_compiler_static_F77 \ +- lt_prog_compiler_no_builtin_flag_F77 \ +- export_dynamic_flag_spec_F77 \ +- thread_safe_flag_spec_F77 \ +- whole_archive_flag_spec_F77 \ +- enable_shared_with_static_runtimes_F77 \ +- old_archive_cmds_F77 \ +- old_archive_from_new_cmds_F77 \ +- predep_objects_F77 \ +- postdep_objects_F77 \ +- predeps_F77 \ +- postdeps_F77 \ +- compiler_lib_search_path_F77 \ +- compiler_lib_search_dirs_F77 \ +- archive_cmds_F77 \ +- archive_expsym_cmds_F77 \ +- postinstall_cmds_F77 \ +- postuninstall_cmds_F77 \ +- old_archive_from_expsyms_cmds_F77 \ +- allow_undefined_flag_F77 \ +- no_undefined_flag_F77 \ +- export_symbols_cmds_F77 \ +- hardcode_libdir_flag_spec_F77 \ +- hardcode_libdir_flag_spec_ld_F77 \ +- hardcode_libdir_separator_F77 \ +- hardcode_automatic_F77 \ +- module_cmds_F77 \ +- module_expsym_cmds_F77 \ +- lt_cv_prog_compiler_c_o_F77 \ +- fix_srcfile_path_F77 \ +- exclude_expsyms_F77 \ +- include_expsyms_F77; do +- +- case $var in +- old_archive_cmds_F77 | \ +- old_archive_from_new_cmds_F77 | \ +- archive_cmds_F77 | \ +- archive_expsym_cmds_F77 | \ +- module_cmds_F77 | \ +- module_expsym_cmds_F77 | \ +- old_archive_from_expsyms_cmds_F77 | \ +- export_symbols_cmds_F77 | \ +- extract_expsyms_cmds | reload_cmds | finish_cmds | \ +- postinstall_cmds | postuninstall_cmds | \ +- old_postinstall_cmds | old_postuninstall_cmds | \ +- sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) +- # Double-quote double-evaled strings. +- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" +- ;; +- *) +- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" +- ;; +- esac +- done +- +- case $lt_echo in +- *'\$0 --fallback-echo"') +- lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` +- ;; +- esac +- +-cfgfile="$ofile" +- +- cat <<__EOF__ >> "$cfgfile" +-# ### BEGIN LIBTOOL TAG CONFIG: $tagname +- +-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: + +-# Shell to use when invoking shell scripts. +-SHELL=$lt_SHELL ++pkg_failed=no ++{ echo "$as_me:$LINENO: checking for GNOME_SESSION" >&5 ++echo $ECHO_N "checking for GNOME_SESSION... $ECHO_C" >&6; } + +-# Whether or not to build shared libraries. +-build_libtool_libs=$enable_shared +- +-# Whether or not to build static libraries. +-build_old_libs=$enable_static ++if test -n "$PKG_CONFIG"; then ++ if test -n "$GNOME_SESSION_CFLAGS"; then ++ pkg_cv_GNOME_SESSION_CFLAGS="$GNOME_SESSION_CFLAGS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"glib-2.0 >= \$GLIB_REQUIRED ++ gio-2.0 >= \$GLIB_REQUIRED ++ gtk+-2.0 >= \$GTK_REQUIRED ++ dbus-glib-1 >= \$DBUS_GLIB_REQUIRED ++ libglade-2.0 >= \$GLADE_REQUIRED ++\"") >&5 ++ ($PKG_CONFIG --exists --print-errors "glib-2.0 >= $GLIB_REQUIRED ++ gio-2.0 >= $GLIB_REQUIRED ++ gtk+-2.0 >= $GTK_REQUIRED ++ dbus-glib-1 >= $DBUS_GLIB_REQUIRED ++ libglade-2.0 >= $GLADE_REQUIRED ++") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_GNOME_SESSION_CFLAGS=`$PKG_CONFIG --cflags "glib-2.0 >= $GLIB_REQUIRED ++ gio-2.0 >= $GLIB_REQUIRED ++ gtk+-2.0 >= $GTK_REQUIRED ++ dbus-glib-1 >= $DBUS_GLIB_REQUIRED ++ libglade-2.0 >= $GLADE_REQUIRED ++" 2>/dev/null` ++else ++ pkg_failed=yes ++fi ++ fi ++else ++ pkg_failed=untried ++fi ++if test -n "$PKG_CONFIG"; then ++ if test -n "$GNOME_SESSION_LIBS"; then ++ pkg_cv_GNOME_SESSION_LIBS="$GNOME_SESSION_LIBS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"glib-2.0 >= \$GLIB_REQUIRED ++ gio-2.0 >= \$GLIB_REQUIRED ++ gtk+-2.0 >= \$GTK_REQUIRED ++ dbus-glib-1 >= \$DBUS_GLIB_REQUIRED ++ libglade-2.0 >= \$GLADE_REQUIRED ++\"") >&5 ++ ($PKG_CONFIG --exists --print-errors "glib-2.0 >= $GLIB_REQUIRED ++ gio-2.0 >= $GLIB_REQUIRED ++ gtk+-2.0 >= $GTK_REQUIRED ++ dbus-glib-1 >= $DBUS_GLIB_REQUIRED ++ libglade-2.0 >= $GLADE_REQUIRED ++") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_GNOME_SESSION_LIBS=`$PKG_CONFIG --libs "glib-2.0 >= $GLIB_REQUIRED ++ gio-2.0 >= $GLIB_REQUIRED ++ gtk+-2.0 >= $GTK_REQUIRED ++ dbus-glib-1 >= $DBUS_GLIB_REQUIRED ++ libglade-2.0 >= $GLADE_REQUIRED ++" 2>/dev/null` ++else ++ pkg_failed=yes ++fi ++ fi ++else ++ pkg_failed=untried ++fi + +-# Whether or not to add -lc for building shared libraries. +-build_libtool_need_lc=$archive_cmds_need_lc_F77 + +-# Whether or not to disallow shared libs when runtime libs are static +-allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_F77 + +-# Whether or not to optimize for fast installation. +-fast_install=$enable_fast_install ++if test $pkg_failed = yes; then + +-# The host system. +-host_alias=$host_alias +-host=$host +-host_os=$host_os ++if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then ++ _pkg_short_errors_supported=yes ++else ++ _pkg_short_errors_supported=no ++fi ++ if test $_pkg_short_errors_supported = yes; then ++ GNOME_SESSION_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "glib-2.0 >= $GLIB_REQUIRED ++ gio-2.0 >= $GLIB_REQUIRED ++ gtk+-2.0 >= $GTK_REQUIRED ++ dbus-glib-1 >= $DBUS_GLIB_REQUIRED ++ libglade-2.0 >= $GLADE_REQUIRED ++"` ++ else ++ GNOME_SESSION_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "glib-2.0 >= $GLIB_REQUIRED ++ gio-2.0 >= $GLIB_REQUIRED ++ gtk+-2.0 >= $GTK_REQUIRED ++ dbus-glib-1 >= $DBUS_GLIB_REQUIRED ++ libglade-2.0 >= $GLADE_REQUIRED ++"` ++ fi ++ # Put the nasty error message in config.log where it belongs ++ echo "$GNOME_SESSION_PKG_ERRORS" >&5 + +-# The build system. +-build_alias=$build_alias +-build=$build +-build_os=$build_os ++ { { echo "$as_me:$LINENO: error: Package requirements (glib-2.0 >= $GLIB_REQUIRED ++ gio-2.0 >= $GLIB_REQUIRED ++ gtk+-2.0 >= $GTK_REQUIRED ++ dbus-glib-1 >= $DBUS_GLIB_REQUIRED ++ libglade-2.0 >= $GLADE_REQUIRED ++) were not met: + +-# An echo program that does not interpret backslashes. +-echo=$lt_echo ++$GNOME_SESSION_PKG_ERRORS + +-# The archiver. +-AR=$lt_AR +-AR_FLAGS=$lt_AR_FLAGS ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. + +-# A C compiler. +-LTCC=$lt_LTCC ++Alternatively, you may set the environment variables GNOME_SESSION_CFLAGS ++and GNOME_SESSION_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&5 ++echo "$as_me: error: Package requirements (glib-2.0 >= $GLIB_REQUIRED ++ gio-2.0 >= $GLIB_REQUIRED ++ gtk+-2.0 >= $GTK_REQUIRED ++ dbus-glib-1 >= $DBUS_GLIB_REQUIRED ++ libglade-2.0 >= $GLADE_REQUIRED ++) were not met: + +-# LTCC compiler flags. +-LTCFLAGS=$lt_LTCFLAGS ++$GNOME_SESSION_PKG_ERRORS + +-# A language-specific compiler. +-CC=$lt_compiler_F77 ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. + +-# Is the compiler the GNU C compiler? +-with_gcc=$GCC_F77 ++Alternatively, you may set the environment variables GNOME_SESSION_CFLAGS ++and GNOME_SESSION_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&2;} ++ { (exit 1); exit 1; }; } ++elif test $pkg_failed = untried; then ++ { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. + +-# An ERE matcher. +-EGREP=$lt_EGREP ++Alternatively, you may set the environment variables GNOME_SESSION_CFLAGS ++and GNOME_SESSION_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. + +-# The linker used to build libraries. +-LD=$lt_LD_F77 ++To get pkg-config, see . ++See \`config.log' for more details." >&5 ++echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. + +-# Whether we need hard or soft links. +-LN_S=$lt_LN_S ++Alternatively, you may set the environment variables GNOME_SESSION_CFLAGS ++and GNOME_SESSION_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. + +-# A BSD-compatible nm program. +-NM=$lt_NM ++To get pkg-config, see . ++See \`config.log' for more details." >&2;} ++ { (exit 1); exit 1; }; } ++else ++ GNOME_SESSION_CFLAGS=$pkg_cv_GNOME_SESSION_CFLAGS ++ GNOME_SESSION_LIBS=$pkg_cv_GNOME_SESSION_LIBS ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++ : ++fi + +-# A symbol stripping program +-STRIP=$lt_STRIP + +-# Used to examine libraries when file_magic_cmd begins "file" +-MAGIC_CMD=$MAGIC_CMD ++pkg_failed=no ++{ echo "$as_me:$LINENO: checking for SESSION_PROPERTIES" >&5 ++echo $ECHO_N "checking for SESSION_PROPERTIES... $ECHO_C" >&6; } + +-# Used on cygwin: DLL creation program. +-DLLTOOL="$DLLTOOL" ++if test -n "$PKG_CONFIG"; then ++ if test -n "$SESSION_PROPERTIES_CFLAGS"; then ++ pkg_cv_SESSION_PROPERTIES_CFLAGS="$SESSION_PROPERTIES_CFLAGS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"glib-2.0 >= \$GLIB_REQUIRED ++ gtk+-2.0 >= \$GTK_REQUIRED ++ libglade-2.0 >= \$GLADE_REQUIRED ++\"") >&5 ++ ($PKG_CONFIG --exists --print-errors "glib-2.0 >= $GLIB_REQUIRED ++ gtk+-2.0 >= $GTK_REQUIRED ++ libglade-2.0 >= $GLADE_REQUIRED ++") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_SESSION_PROPERTIES_CFLAGS=`$PKG_CONFIG --cflags "glib-2.0 >= $GLIB_REQUIRED ++ gtk+-2.0 >= $GTK_REQUIRED ++ libglade-2.0 >= $GLADE_REQUIRED ++" 2>/dev/null` ++else ++ pkg_failed=yes ++fi ++ fi ++else ++ pkg_failed=untried ++fi ++if test -n "$PKG_CONFIG"; then ++ if test -n "$SESSION_PROPERTIES_LIBS"; then ++ pkg_cv_SESSION_PROPERTIES_LIBS="$SESSION_PROPERTIES_LIBS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"glib-2.0 >= \$GLIB_REQUIRED ++ gtk+-2.0 >= \$GTK_REQUIRED ++ libglade-2.0 >= \$GLADE_REQUIRED ++\"") >&5 ++ ($PKG_CONFIG --exists --print-errors "glib-2.0 >= $GLIB_REQUIRED ++ gtk+-2.0 >= $GTK_REQUIRED ++ libglade-2.0 >= $GLADE_REQUIRED ++") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_SESSION_PROPERTIES_LIBS=`$PKG_CONFIG --libs "glib-2.0 >= $GLIB_REQUIRED ++ gtk+-2.0 >= $GTK_REQUIRED ++ libglade-2.0 >= $GLADE_REQUIRED ++" 2>/dev/null` ++else ++ pkg_failed=yes ++fi ++ fi ++else ++ pkg_failed=untried ++fi + +-# Used on cygwin: object dumper. +-OBJDUMP="$OBJDUMP" + +-# Used on cygwin: assembler. +-AS="$AS" + +-# The name of the directory that contains temporary libtool files. +-objdir=$objdir ++if test $pkg_failed = yes; then + +-# How to create reloadable object files. +-reload_flag=$lt_reload_flag +-reload_cmds=$lt_reload_cmds ++if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then ++ _pkg_short_errors_supported=yes ++else ++ _pkg_short_errors_supported=no ++fi ++ if test $_pkg_short_errors_supported = yes; then ++ SESSION_PROPERTIES_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "glib-2.0 >= $GLIB_REQUIRED ++ gtk+-2.0 >= $GTK_REQUIRED ++ libglade-2.0 >= $GLADE_REQUIRED ++"` ++ else ++ SESSION_PROPERTIES_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "glib-2.0 >= $GLIB_REQUIRED ++ gtk+-2.0 >= $GTK_REQUIRED ++ libglade-2.0 >= $GLADE_REQUIRED ++"` ++ fi ++ # Put the nasty error message in config.log where it belongs ++ echo "$SESSION_PROPERTIES_PKG_ERRORS" >&5 + +-# How to pass a linker flag through the compiler. +-wl=$lt_lt_prog_compiler_wl_F77 ++ { { echo "$as_me:$LINENO: error: Package requirements (glib-2.0 >= $GLIB_REQUIRED ++ gtk+-2.0 >= $GTK_REQUIRED ++ libglade-2.0 >= $GLADE_REQUIRED ++) were not met: + +-# Object file suffix (normally "o"). +-objext="$ac_objext" ++$SESSION_PROPERTIES_PKG_ERRORS + +-# Old archive suffix (normally "a"). +-libext="$libext" ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. + +-# Shared library suffix (normally ".so"). +-shrext_cmds='$shrext_cmds' ++Alternatively, you may set the environment variables SESSION_PROPERTIES_CFLAGS ++and SESSION_PROPERTIES_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&5 ++echo "$as_me: error: Package requirements (glib-2.0 >= $GLIB_REQUIRED ++ gtk+-2.0 >= $GTK_REQUIRED ++ libglade-2.0 >= $GLADE_REQUIRED ++) were not met: + +-# Executable file suffix (normally ""). +-exeext="$exeext" ++$SESSION_PROPERTIES_PKG_ERRORS + +-# Additional compiler flags for building library objects. +-pic_flag=$lt_lt_prog_compiler_pic_F77 +-pic_mode=$pic_mode ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. + +-# What is the maximum length of a command? +-max_cmd_len=$lt_cv_sys_max_cmd_len ++Alternatively, you may set the environment variables SESSION_PROPERTIES_CFLAGS ++and SESSION_PROPERTIES_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&2;} ++ { (exit 1); exit 1; }; } ++elif test $pkg_failed = untried; then ++ { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. + +-# Does compiler simultaneously support -c and -o options? +-compiler_c_o=$lt_lt_cv_prog_compiler_c_o_F77 ++Alternatively, you may set the environment variables SESSION_PROPERTIES_CFLAGS ++and SESSION_PROPERTIES_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. + +-# Must we lock files when doing compilation? +-need_locks=$lt_need_locks ++To get pkg-config, see . ++See \`config.log' for more details." >&5 ++echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. + +-# Do we need the lib prefix for modules? +-need_lib_prefix=$need_lib_prefix ++Alternatively, you may set the environment variables SESSION_PROPERTIES_CFLAGS ++and SESSION_PROPERTIES_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. + +-# Do we need a version for libraries? +-need_version=$need_version +- +-# Whether dlopen is supported. +-dlopen_support=$enable_dlopen +- +-# Whether dlopen of programs is supported. +-dlopen_self=$enable_dlopen_self ++To get pkg-config, see . ++See \`config.log' for more details." >&2;} ++ { (exit 1); exit 1; }; } ++else ++ SESSION_PROPERTIES_CFLAGS=$pkg_cv_SESSION_PROPERTIES_CFLAGS ++ SESSION_PROPERTIES_LIBS=$pkg_cv_SESSION_PROPERTIES_LIBS ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++ : ++fi + +-# Whether dlopen of statically linked programs is supported. +-dlopen_self_static=$enable_dlopen_self_static + +-# Compiler flag to prevent dynamic linking. +-link_static_flag=$lt_lt_prog_compiler_static_F77 ++pkg_failed=no ++{ echo "$as_me:$LINENO: checking for SPLASH" >&5 ++echo $ECHO_N "checking for SPLASH... $ECHO_C" >&6; } + +-# Compiler flag to turn off builtin functions. +-no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_F77 ++if test -n "$PKG_CONFIG"; then ++ if test -n "$SPLASH_CFLAGS"; then ++ pkg_cv_SPLASH_CFLAGS="$SPLASH_CFLAGS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"glib-2.0 >= \$GLIB_REQUIRED ++ gtk+-2.0 >= \$GTK_REQUIRED ++ dbus-glib-1 >= \$DBUS_GLIB_REQUIRED ++ libstartup-notification-1.0 ++ gconf-2.0\"") >&5 ++ ($PKG_CONFIG --exists --print-errors "glib-2.0 >= $GLIB_REQUIRED ++ gtk+-2.0 >= $GTK_REQUIRED ++ dbus-glib-1 >= $DBUS_GLIB_REQUIRED ++ libstartup-notification-1.0 ++ gconf-2.0") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_SPLASH_CFLAGS=`$PKG_CONFIG --cflags "glib-2.0 >= $GLIB_REQUIRED ++ gtk+-2.0 >= $GTK_REQUIRED ++ dbus-glib-1 >= $DBUS_GLIB_REQUIRED ++ libstartup-notification-1.0 ++ gconf-2.0" 2>/dev/null` ++else ++ pkg_failed=yes ++fi ++ fi ++else ++ pkg_failed=untried ++fi ++if test -n "$PKG_CONFIG"; then ++ if test -n "$SPLASH_LIBS"; then ++ pkg_cv_SPLASH_LIBS="$SPLASH_LIBS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"glib-2.0 >= \$GLIB_REQUIRED ++ gtk+-2.0 >= \$GTK_REQUIRED ++ dbus-glib-1 >= \$DBUS_GLIB_REQUIRED ++ libstartup-notification-1.0 ++ gconf-2.0\"") >&5 ++ ($PKG_CONFIG --exists --print-errors "glib-2.0 >= $GLIB_REQUIRED ++ gtk+-2.0 >= $GTK_REQUIRED ++ dbus-glib-1 >= $DBUS_GLIB_REQUIRED ++ libstartup-notification-1.0 ++ gconf-2.0") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_SPLASH_LIBS=`$PKG_CONFIG --libs "glib-2.0 >= $GLIB_REQUIRED ++ gtk+-2.0 >= $GTK_REQUIRED ++ dbus-glib-1 >= $DBUS_GLIB_REQUIRED ++ libstartup-notification-1.0 ++ gconf-2.0" 2>/dev/null` ++else ++ pkg_failed=yes ++fi ++ fi ++else ++ pkg_failed=untried ++fi + +-# Compiler flag to allow reflexive dlopens. +-export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_F77 + +-# Compiler flag to generate shared objects directly from archives. +-whole_archive_flag_spec=$lt_whole_archive_flag_spec_F77 + +-# Compiler flag to generate thread-safe objects. +-thread_safe_flag_spec=$lt_thread_safe_flag_spec_F77 ++if test $pkg_failed = yes; then + +-# Library versioning type. +-version_type=$version_type ++if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then ++ _pkg_short_errors_supported=yes ++else ++ _pkg_short_errors_supported=no ++fi ++ if test $_pkg_short_errors_supported = yes; then ++ SPLASH_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "glib-2.0 >= $GLIB_REQUIRED ++ gtk+-2.0 >= $GTK_REQUIRED ++ dbus-glib-1 >= $DBUS_GLIB_REQUIRED ++ libstartup-notification-1.0 ++ gconf-2.0"` ++ else ++ SPLASH_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "glib-2.0 >= $GLIB_REQUIRED ++ gtk+-2.0 >= $GTK_REQUIRED ++ dbus-glib-1 >= $DBUS_GLIB_REQUIRED ++ libstartup-notification-1.0 ++ gconf-2.0"` ++ fi ++ # Put the nasty error message in config.log where it belongs ++ echo "$SPLASH_PKG_ERRORS" >&5 + +-# Format of library name prefix. +-libname_spec=$lt_libname_spec ++ { { echo "$as_me:$LINENO: error: Package requirements (glib-2.0 >= $GLIB_REQUIRED ++ gtk+-2.0 >= $GTK_REQUIRED ++ dbus-glib-1 >= $DBUS_GLIB_REQUIRED ++ libstartup-notification-1.0 ++ gconf-2.0) were not met: + +-# List of archive names. First name is the real one, the rest are links. +-# The last name is the one that the linker finds with -lNAME. +-library_names_spec=$lt_library_names_spec ++$SPLASH_PKG_ERRORS + +-# The coded name of the library, if different from the real name. +-soname_spec=$lt_soname_spec ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. + +-# Commands used to build and install an old-style archive. +-RANLIB=$lt_RANLIB +-old_archive_cmds=$lt_old_archive_cmds_F77 +-old_postinstall_cmds=$lt_old_postinstall_cmds +-old_postuninstall_cmds=$lt_old_postuninstall_cmds ++Alternatively, you may set the environment variables SPLASH_CFLAGS ++and SPLASH_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&5 ++echo "$as_me: error: Package requirements (glib-2.0 >= $GLIB_REQUIRED ++ gtk+-2.0 >= $GTK_REQUIRED ++ dbus-glib-1 >= $DBUS_GLIB_REQUIRED ++ libstartup-notification-1.0 ++ gconf-2.0) were not met: + +-# Create an old-style archive from a shared archive. +-old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_F77 ++$SPLASH_PKG_ERRORS + +-# Create a temporary old-style archive to link instead of a shared archive. +-old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_F77 ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. + +-# Commands used to build and install a shared archive. +-archive_cmds=$lt_archive_cmds_F77 +-archive_expsym_cmds=$lt_archive_expsym_cmds_F77 +-postinstall_cmds=$lt_postinstall_cmds +-postuninstall_cmds=$lt_postuninstall_cmds ++Alternatively, you may set the environment variables SPLASH_CFLAGS ++and SPLASH_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&2;} ++ { (exit 1); exit 1; }; } ++elif test $pkg_failed = untried; then ++ { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. + +-# Commands used to build a loadable module (assumed same as above if empty) +-module_cmds=$lt_module_cmds_F77 +-module_expsym_cmds=$lt_module_expsym_cmds_F77 ++Alternatively, you may set the environment variables SPLASH_CFLAGS ++and SPLASH_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. + +-# Commands to strip libraries. +-old_striplib=$lt_old_striplib +-striplib=$lt_striplib ++To get pkg-config, see . ++See \`config.log' for more details." >&5 ++echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. + +-# Dependencies to place before the objects being linked to create a +-# shared library. +-predep_objects=$lt_predep_objects_F77 +- +-# Dependencies to place after the objects being linked to create a +-# shared library. +-postdep_objects=$lt_postdep_objects_F77 +- +-# Dependencies to place before the objects being linked to create a +-# shared library. +-predeps=$lt_predeps_F77 +- +-# Dependencies to place after the objects being linked to create a +-# shared library. +-postdeps=$lt_postdeps_F77 +- +-# The directories searched by this compiler when creating a shared +-# library +-compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_F77 +- +-# The library search path used internally by the compiler when linking +-# a shared library. +-compiler_lib_search_path=$lt_compiler_lib_search_path_F77 ++Alternatively, you may set the environment variables SPLASH_CFLAGS ++and SPLASH_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. + +-# Method to check whether dependent libraries are shared objects. +-deplibs_check_method=$lt_deplibs_check_method ++To get pkg-config, see . ++See \`config.log' for more details." >&2;} ++ { (exit 1); exit 1; }; } ++else ++ SPLASH_CFLAGS=$pkg_cv_SPLASH_CFLAGS ++ SPLASH_LIBS=$pkg_cv_SPLASH_LIBS ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++ : ++fi + +-# Command to use when deplibs_check_method == file_magic. +-file_magic_cmd=$lt_file_magic_cmd + +-# Flag that allows shared libraries with undefined symbols to be built. +-allow_undefined_flag=$lt_allow_undefined_flag_F77 ++pkg_failed=no ++{ echo "$as_me:$LINENO: checking for COMPAT" >&5 ++echo $ECHO_N "checking for COMPAT... $ECHO_C" >&6; } + +-# Flag that forces no undefined symbols. +-no_undefined_flag=$lt_no_undefined_flag_F77 ++if test -n "$PKG_CONFIG"; then ++ if test -n "$COMPAT_CFLAGS"; then ++ pkg_cv_COMPAT_CFLAGS="$COMPAT_CFLAGS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"gtk+-2.0 >= \$GTK_REQUIRED ++ dbus-glib-1 >= \$DBUS_GLIB_REQUIRED\"") >&5 ++ ($PKG_CONFIG --exists --print-errors "gtk+-2.0 >= $GTK_REQUIRED ++ dbus-glib-1 >= $DBUS_GLIB_REQUIRED") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_COMPAT_CFLAGS=`$PKG_CONFIG --cflags "gtk+-2.0 >= $GTK_REQUIRED ++ dbus-glib-1 >= $DBUS_GLIB_REQUIRED" 2>/dev/null` ++else ++ pkg_failed=yes ++fi ++ fi ++else ++ pkg_failed=untried ++fi ++if test -n "$PKG_CONFIG"; then ++ if test -n "$COMPAT_LIBS"; then ++ pkg_cv_COMPAT_LIBS="$COMPAT_LIBS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"gtk+-2.0 >= \$GTK_REQUIRED ++ dbus-glib-1 >= \$DBUS_GLIB_REQUIRED\"") >&5 ++ ($PKG_CONFIG --exists --print-errors "gtk+-2.0 >= $GTK_REQUIRED ++ dbus-glib-1 >= $DBUS_GLIB_REQUIRED") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_COMPAT_LIBS=`$PKG_CONFIG --libs "gtk+-2.0 >= $GTK_REQUIRED ++ dbus-glib-1 >= $DBUS_GLIB_REQUIRED" 2>/dev/null` ++else ++ pkg_failed=yes ++fi ++ fi ++else ++ pkg_failed=untried ++fi + +-# Commands used to finish a libtool library installation in a directory. +-finish_cmds=$lt_finish_cmds + +-# Same as above, but a single script fragment to be evaled but not shown. +-finish_eval=$lt_finish_eval + +-# Take the output of nm and produce a listing of raw symbols and C names. +-global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe ++if test $pkg_failed = yes; then + +-# Transform the output of nm in a proper C declaration +-global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl ++if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then ++ _pkg_short_errors_supported=yes ++else ++ _pkg_short_errors_supported=no ++fi ++ if test $_pkg_short_errors_supported = yes; then ++ COMPAT_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "gtk+-2.0 >= $GTK_REQUIRED ++ dbus-glib-1 >= $DBUS_GLIB_REQUIRED"` ++ else ++ COMPAT_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "gtk+-2.0 >= $GTK_REQUIRED ++ dbus-glib-1 >= $DBUS_GLIB_REQUIRED"` ++ fi ++ # Put the nasty error message in config.log where it belongs ++ echo "$COMPAT_PKG_ERRORS" >&5 + +-# Transform the output of nm in a C name address pair +-global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address ++ { { echo "$as_me:$LINENO: error: Package requirements (gtk+-2.0 >= $GTK_REQUIRED ++ dbus-glib-1 >= $DBUS_GLIB_REQUIRED) were not met: + +-# This is the shared library runtime path variable. +-runpath_var=$runpath_var ++$COMPAT_PKG_ERRORS + +-# This is the shared library path variable. +-shlibpath_var=$shlibpath_var ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. + +-# Is shlibpath searched before the hard-coded library search path? +-shlibpath_overrides_runpath=$shlibpath_overrides_runpath ++Alternatively, you may set the environment variables COMPAT_CFLAGS ++and COMPAT_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&5 ++echo "$as_me: error: Package requirements (gtk+-2.0 >= $GTK_REQUIRED ++ dbus-glib-1 >= $DBUS_GLIB_REQUIRED) were not met: + +-# How to hardcode a shared library path into an executable. +-hardcode_action=$hardcode_action_F77 ++$COMPAT_PKG_ERRORS + +-# Whether we should hardcode library paths into libraries. +-hardcode_into_libs=$hardcode_into_libs ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. + +-# Flag to hardcode \$libdir into a binary during linking. +-# This must work even if \$libdir does not exist. +-hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_F77 ++Alternatively, you may set the environment variables COMPAT_CFLAGS ++and COMPAT_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&2;} ++ { (exit 1); exit 1; }; } ++elif test $pkg_failed = untried; then ++ { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. + +-# If ld is used when linking, flag to hardcode \$libdir into +-# a binary during linking. This must work even if \$libdir does +-# not exist. +-hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_F77 +- +-# Whether we need a single -rpath flag with a separated argument. +-hardcode_libdir_separator=$lt_hardcode_libdir_separator_F77 +- +-# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the +-# resulting binary. +-hardcode_direct=$hardcode_direct_F77 +- +-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the +-# resulting binary. +-hardcode_minus_L=$hardcode_minus_L_F77 +- +-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into +-# the resulting binary. +-hardcode_shlibpath_var=$hardcode_shlibpath_var_F77 +- +-# Set to yes if building a shared library automatically hardcodes DIR into the library +-# and all subsequent libraries and executables linked against it. +-hardcode_automatic=$hardcode_automatic_F77 ++Alternatively, you may set the environment variables COMPAT_CFLAGS ++and COMPAT_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. + +-# Variables whose values should be saved in libtool wrapper scripts and +-# restored at relink time. +-variables_saved_for_relink="$variables_saved_for_relink" ++To get pkg-config, see . ++See \`config.log' for more details." >&5 ++echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. + +-# Whether libtool must link a program against all its dependency libraries. +-link_all_deplibs=$link_all_deplibs_F77 ++Alternatively, you may set the environment variables COMPAT_CFLAGS ++and COMPAT_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. + +-# Compile-time system search path for libraries +-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec ++To get pkg-config, see . ++See \`config.log' for more details." >&2;} ++ { (exit 1); exit 1; }; } ++else ++ COMPAT_CFLAGS=$pkg_cv_COMPAT_CFLAGS ++ COMPAT_LIBS=$pkg_cv_COMPAT_LIBS ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++ : ++fi + +-# Run-time system search path for libraries +-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec + +-# Fix the shell variable \$srcfile for the compiler. +-fix_srcfile_path=$lt_fix_srcfile_path ++pkg_failed=no ++{ echo "$as_me:$LINENO: checking for SM" >&5 ++echo $ECHO_N "checking for SM... $ECHO_C" >&6; } + +-# Set to yes if exported symbols are required. +-always_export_symbols=$always_export_symbols_F77 ++if test -n "$PKG_CONFIG"; then ++ if test -n "$SM_CFLAGS"; then ++ pkg_cv_SM_CFLAGS="$SM_CFLAGS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"sm\"") >&5 ++ ($PKG_CONFIG --exists --print-errors "sm") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_SM_CFLAGS=`$PKG_CONFIG --cflags "sm" 2>/dev/null` ++else ++ pkg_failed=yes ++fi ++ fi ++else ++ pkg_failed=untried ++fi ++if test -n "$PKG_CONFIG"; then ++ if test -n "$SM_LIBS"; then ++ pkg_cv_SM_LIBS="$SM_LIBS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"sm\"") >&5 ++ ($PKG_CONFIG --exists --print-errors "sm") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_SM_LIBS=`$PKG_CONFIG --libs "sm" 2>/dev/null` ++else ++ pkg_failed=yes ++fi ++ fi ++else ++ pkg_failed=untried ++fi + +-# The commands to list exported symbols. +-export_symbols_cmds=$lt_export_symbols_cmds_F77 + +-# The commands to extract the exported symbol list from a shared archive. +-extract_expsyms_cmds=$lt_extract_expsyms_cmds + +-# Symbols that should not be listed in the preloaded symbols. +-exclude_expsyms=$lt_exclude_expsyms_F77 ++if test $pkg_failed = yes; then + +-# Symbols that must always be exported. +-include_expsyms=$lt_include_expsyms_F77 ++if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then ++ _pkg_short_errors_supported=yes ++else ++ _pkg_short_errors_supported=no ++fi ++ if test $_pkg_short_errors_supported = yes; then ++ SM_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "sm"` ++ else ++ SM_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "sm"` ++ fi ++ # Put the nasty error message in config.log where it belongs ++ echo "$SM_PKG_ERRORS" >&5 + +-# ### END LIBTOOL TAG CONFIG: $tagname ++ { { echo "$as_me:$LINENO: error: Package requirements (sm) were not met: + +-__EOF__ ++$SM_PKG_ERRORS + ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. + +-else +- # If there is no Makefile yet, we rely on a make rule to execute +- # `config.status --recheck' to rerun these tests and create the +- # libtool script then. +- ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` +- if test -f "$ltmain_in"; then +- test -f Makefile && make "$ltmain" +- fi +-fi ++Alternatively, you may set the environment variables SM_CFLAGS ++and SM_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&5 ++echo "$as_me: error: Package requirements (sm) were not met: + ++$SM_PKG_ERRORS + +-ac_ext=c +-ac_cpp='$CPP $CPPFLAGS' +-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +-ac_compiler_gnu=$ac_cv_c_compiler_gnu ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. + +-CC="$lt_save_CC" ++Alternatively, you may set the environment variables SM_CFLAGS ++and SM_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&2;} ++ { (exit 1); exit 1; }; } ++elif test $pkg_failed = untried; then ++ { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. + +- else +- tagname="" +- fi +- ;; ++Alternatively, you may set the environment variables SM_CFLAGS ++and SM_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. + +- GCJ) +- if test -n "$GCJ" && test "X$GCJ" != "Xno"; then ++To get pkg-config, see . ++See \`config.log' for more details." >&5 ++echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. + ++Alternatively, you may set the environment variables SM_CFLAGS ++and SM_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. + +-# Source file extension for Java test sources. +-ac_ext=java ++To get pkg-config, see . ++See \`config.log' for more details." >&2;} ++ { (exit 1); exit 1; }; } ++else ++ SM_CFLAGS=$pkg_cv_SM_CFLAGS ++ SM_LIBS=$pkg_cv_SM_LIBS ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++ : ++fi + +-# Object file extension for compiled Java test sources. +-objext=o +-objext_GCJ=$objext ++pkg_failed=no ++{ echo "$as_me:$LINENO: checking for ICE" >&5 ++echo $ECHO_N "checking for ICE... $ECHO_C" >&6; } + +-# Code to be used in simple compile tests +-lt_simple_compile_test_code="class foo {}" ++if test -n "$PKG_CONFIG"; then ++ if test -n "$ICE_CFLAGS"; then ++ pkg_cv_ICE_CFLAGS="$ICE_CFLAGS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"ice\"") >&5 ++ ($PKG_CONFIG --exists --print-errors "ice") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_ICE_CFLAGS=`$PKG_CONFIG --cflags "ice" 2>/dev/null` ++else ++ pkg_failed=yes ++fi ++ fi ++else ++ pkg_failed=untried ++fi ++if test -n "$PKG_CONFIG"; then ++ if test -n "$ICE_LIBS"; then ++ pkg_cv_ICE_LIBS="$ICE_LIBS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"ice\"") >&5 ++ ($PKG_CONFIG --exists --print-errors "ice") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_ICE_LIBS=`$PKG_CONFIG --libs "ice" 2>/dev/null` ++else ++ pkg_failed=yes ++fi ++ fi ++else ++ pkg_failed=untried ++fi + +-# Code to be used in simple link tests +-lt_simple_link_test_code='public class conftest { public static void main(String[] argv) {}; }' + +-# ltmain only uses $CC for tagged configurations so make sure $CC is set. + +-# If no C compiler was specified, use CC. +-LTCC=${LTCC-"$CC"} ++if test $pkg_failed = yes; then + +-# If no C compiler flags were specified, use CFLAGS. +-LTCFLAGS=${LTCFLAGS-"$CFLAGS"} ++if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then ++ _pkg_short_errors_supported=yes ++else ++ _pkg_short_errors_supported=no ++fi ++ if test $_pkg_short_errors_supported = yes; then ++ ICE_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "ice"` ++ else ++ ICE_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "ice"` ++ fi ++ # Put the nasty error message in config.log where it belongs ++ echo "$ICE_PKG_ERRORS" >&5 + +-# Allow CC to be a program name with arguments. +-compiler=$CC ++ { { echo "$as_me:$LINENO: error: Package requirements (ice) were not met: + ++$ICE_PKG_ERRORS + +-# save warnings/boilerplate of simple test code +-ac_outfile=conftest.$ac_objext +-echo "$lt_simple_compile_test_code" >conftest.$ac_ext +-eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +-_lt_compiler_boilerplate=`cat conftest.err` +-$rm conftest* ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. + +-ac_outfile=conftest.$ac_objext +-echo "$lt_simple_link_test_code" >conftest.$ac_ext +-eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +-_lt_linker_boilerplate=`cat conftest.err` +-$rm -r conftest* ++Alternatively, you may set the environment variables ICE_CFLAGS ++and ICE_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&5 ++echo "$as_me: error: Package requirements (ice) were not met: + ++$ICE_PKG_ERRORS + +-# Allow CC to be a program name with arguments. +-lt_save_CC="$CC" +-CC=${GCJ-"gcj"} +-compiler=$CC +-compiler_GCJ=$CC +-for cc_temp in $compiler""; do +- case $cc_temp in +- compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; +- distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; +- \-*) ;; +- *) break;; +- esac +-done +-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. + ++Alternatively, you may set the environment variables ICE_CFLAGS ++and ICE_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&2;} ++ { (exit 1); exit 1; }; } ++elif test $pkg_failed = untried; then ++ { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. + +-# GCJ did not exist at the time GCC didn't implicitly link libc in. +-archive_cmds_need_lc_GCJ=no ++Alternatively, you may set the environment variables ICE_CFLAGS ++and ICE_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. + +-old_archive_cmds_GCJ=$old_archive_cmds ++To get pkg-config, see . ++See \`config.log' for more details." >&5 ++echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. + ++Alternatively, you may set the environment variables ICE_CFLAGS ++and ICE_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. + +-lt_prog_compiler_no_builtin_flag_GCJ= ++To get pkg-config, see . ++See \`config.log' for more details." >&2;} ++ { (exit 1); exit 1; }; } ++else ++ ICE_CFLAGS=$pkg_cv_ICE_CFLAGS ++ ICE_LIBS=$pkg_cv_ICE_LIBS ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++ : ++fi + +-if test "$GCC" = yes; then +- lt_prog_compiler_no_builtin_flag_GCJ=' -fno-builtin' + ++pkg_failed=no ++{ echo "$as_me:$LINENO: checking for DBUS_GLIB" >&5 ++echo $ECHO_N "checking for DBUS_GLIB... $ECHO_C" >&6; } + +-{ $as_echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 +-$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; } +-if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then +- $as_echo_n "(cached) " >&6 ++if test -n "$PKG_CONFIG"; then ++ if test -n "$DBUS_GLIB_CFLAGS"; then ++ pkg_cv_DBUS_GLIB_CFLAGS="$DBUS_GLIB_CFLAGS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"dbus-glib-1 >= \$DBUS_GLIB_REQUIRED\"") >&5 ++ ($PKG_CONFIG --exists --print-errors "dbus-glib-1 >= $DBUS_GLIB_REQUIRED") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_DBUS_GLIB_CFLAGS=`$PKG_CONFIG --cflags "dbus-glib-1 >= $DBUS_GLIB_REQUIRED" 2>/dev/null` + else +- lt_cv_prog_compiler_rtti_exceptions=no +- ac_outfile=conftest.$ac_objext +- echo "$lt_simple_compile_test_code" > conftest.$ac_ext +- lt_compiler_flag="-fno-rtti -fno-exceptions" +- # Insert the option either (1) after the last *FLAGS variable, or +- # (2) before a word containing "conftest.", or (3) at the end. +- # Note that $ac_compile itself does not contain backslashes and begins +- # with a dollar sign (not a hyphen), so the echo should work correctly. +- # The option is referenced via a variable to avoid confusing sed. +- lt_compile=`echo "$ac_compile" | $SED \ +- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ +- -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ +- -e 's:$: $lt_compiler_flag:'` +- (eval echo "\"\$as_me:18666: $lt_compile\"" >&5) +- (eval "$lt_compile" 2>conftest.err) +- ac_status=$? +- cat conftest.err >&5 +- echo "$as_me:18670: \$? = $ac_status" >&5 +- if (exit $ac_status) && test -s "$ac_outfile"; then +- # The compiler can only warn and ignore the option if not recognized +- # So say no if there are warnings other than the usual output. +- $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp +- $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 +- if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then +- lt_cv_prog_compiler_rtti_exceptions=yes +- fi +- fi +- $rm conftest* +- ++ pkg_failed=yes + fi +-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 +-$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; } +- +-if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then +- lt_prog_compiler_no_builtin_flag_GCJ="$lt_prog_compiler_no_builtin_flag_GCJ -fno-rtti -fno-exceptions" ++ fi + else +- : ++ pkg_failed=untried ++fi ++if test -n "$PKG_CONFIG"; then ++ if test -n "$DBUS_GLIB_LIBS"; then ++ pkg_cv_DBUS_GLIB_LIBS="$DBUS_GLIB_LIBS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"dbus-glib-1 >= \$DBUS_GLIB_REQUIRED\"") >&5 ++ ($PKG_CONFIG --exists --print-errors "dbus-glib-1 >= $DBUS_GLIB_REQUIRED") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_DBUS_GLIB_LIBS=`$PKG_CONFIG --libs "dbus-glib-1 >= $DBUS_GLIB_REQUIRED" 2>/dev/null` ++else ++ pkg_failed=yes + fi ++ fi ++else ++ pkg_failed=untried ++fi ++ + ++ ++if test $pkg_failed = yes; then ++ ++if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then ++ _pkg_short_errors_supported=yes ++else ++ _pkg_short_errors_supported=no + fi ++ if test $_pkg_short_errors_supported = yes; then ++ DBUS_GLIB_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "dbus-glib-1 >= $DBUS_GLIB_REQUIRED"` ++ else ++ DBUS_GLIB_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "dbus-glib-1 >= $DBUS_GLIB_REQUIRED"` ++ fi ++ # Put the nasty error message in config.log where it belongs ++ echo "$DBUS_GLIB_PKG_ERRORS" >&5 + +-lt_prog_compiler_wl_GCJ= +-lt_prog_compiler_pic_GCJ= +-lt_prog_compiler_static_GCJ= ++ { { echo "$as_me:$LINENO: error: Package requirements (dbus-glib-1 >= $DBUS_GLIB_REQUIRED) were not met: + +-{ $as_echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 +-$as_echo_n "checking for $compiler option to produce PIC... " >&6; } ++$DBUS_GLIB_PKG_ERRORS + +- if test "$GCC" = yes; then +- lt_prog_compiler_wl_GCJ='-Wl,' +- lt_prog_compiler_static_GCJ='-static' ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. + +- case $host_os in +- aix*) +- # All AIX code is PIC. +- if test "$host_cpu" = ia64; then +- # AIX 5 now supports IA64 processor +- lt_prog_compiler_static_GCJ='-Bstatic' +- fi +- ;; +- +- amigaos*) +- # FIXME: we need at least 68020 code to build shared libraries, but +- # adding the `-m68020' flag to GCC prevents building anything better, +- # like `-m68040'. +- lt_prog_compiler_pic_GCJ='-m68020 -resident32 -malways-restore-a4' +- ;; +- +- beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) +- # PIC is the default for these OSes. +- ;; ++Alternatively, you may set the environment variables DBUS_GLIB_CFLAGS ++and DBUS_GLIB_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&5 ++echo "$as_me: error: Package requirements (dbus-glib-1 >= $DBUS_GLIB_REQUIRED) were not met: + +- mingw* | cygwin* | pw32* | os2*) +- # This hack is so that the source file can tell whether it is being +- # built for inclusion in a dll (and should export symbols for example). +- # Although the cygwin gcc ignores -fPIC, still need this for old-style +- # (--disable-auto-import) libraries ++$DBUS_GLIB_PKG_ERRORS + +- ;; ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. + +- darwin* | rhapsody*) +- # PIC is the default on this platform +- # Common symbols not allowed in MH_DYLIB files +- lt_prog_compiler_pic_GCJ='-fno-common' +- ;; ++Alternatively, you may set the environment variables DBUS_GLIB_CFLAGS ++and DBUS_GLIB_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&2;} ++ { (exit 1); exit 1; }; } ++elif test $pkg_failed = untried; then ++ { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. + +- interix[3-9]*) +- # Interix 3.x gcc -fpic/-fPIC options generate broken code. +- # Instead, we relocate shared libraries at runtime. +- ;; ++Alternatively, you may set the environment variables DBUS_GLIB_CFLAGS ++and DBUS_GLIB_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. + +- msdosdjgpp*) +- # Just because we use GCC doesn't mean we suddenly get shared libraries +- # on systems that don't support them. +- lt_prog_compiler_can_build_shared_GCJ=no +- enable_shared=no +- ;; ++To get pkg-config, see . ++See \`config.log' for more details." >&5 ++echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. + +- sysv4*MP*) +- if test -d /usr/nec; then +- lt_prog_compiler_pic_GCJ=-Kconform_pic +- fi +- ;; ++Alternatively, you may set the environment variables DBUS_GLIB_CFLAGS ++and DBUS_GLIB_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. + +- hpux*) +- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but +- # not for PA HP-UX. +- case $host_cpu in +- hppa*64*|ia64*) +- # +Z the default +- ;; +- *) +- lt_prog_compiler_pic_GCJ='-fPIC' +- ;; +- esac +- ;; ++To get pkg-config, see . ++See \`config.log' for more details." >&2;} ++ { (exit 1); exit 1; }; } ++else ++ DBUS_GLIB_CFLAGS=$pkg_cv_DBUS_GLIB_CFLAGS ++ DBUS_GLIB_LIBS=$pkg_cv_DBUS_GLIB_LIBS ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++ : ++fi + +- *) +- lt_prog_compiler_pic_GCJ='-fPIC' +- ;; +- esac +- else +- # PORTME Check for flag to pass linker flags through the system compiler. +- case $host_os in +- aix*) +- lt_prog_compiler_wl_GCJ='-Wl,' +- if test "$host_cpu" = ia64; then +- # AIX 5 now supports IA64 processor +- lt_prog_compiler_static_GCJ='-Bstatic' +- else +- lt_prog_compiler_static_GCJ='-bnso -bI:/lib/syscalls.exp' +- fi +- ;; +- darwin*) +- # PIC is the default on this platform +- # Common symbols not allowed in MH_DYLIB files +- case $cc_basename in +- xlc*) +- lt_prog_compiler_pic_GCJ='-qnocommon' +- lt_prog_compiler_wl_GCJ='-Wl,' +- ;; +- esac +- ;; ++pkg_failed=no ++{ echo "$as_me:$LINENO: checking for GCONF" >&5 ++echo $ECHO_N "checking for GCONF... $ECHO_C" >&6; } + +- mingw* | cygwin* | pw32* | os2*) +- # This hack is so that the source file can tell whether it is being +- # built for inclusion in a dll (and should export symbols for example). ++if test -n "$PKG_CONFIG"; then ++ if test -n "$GCONF_CFLAGS"; then ++ pkg_cv_GCONF_CFLAGS="$GCONF_CFLAGS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"gconf-2.0\"") >&5 ++ ($PKG_CONFIG --exists --print-errors "gconf-2.0") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_GCONF_CFLAGS=`$PKG_CONFIG --cflags "gconf-2.0" 2>/dev/null` ++else ++ pkg_failed=yes ++fi ++ fi ++else ++ pkg_failed=untried ++fi ++if test -n "$PKG_CONFIG"; then ++ if test -n "$GCONF_LIBS"; then ++ pkg_cv_GCONF_LIBS="$GCONF_LIBS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"gconf-2.0\"") >&5 ++ ($PKG_CONFIG --exists --print-errors "gconf-2.0") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_GCONF_LIBS=`$PKG_CONFIG --libs "gconf-2.0" 2>/dev/null` ++else ++ pkg_failed=yes ++fi ++ fi ++else ++ pkg_failed=untried ++fi + +- ;; + +- hpux9* | hpux10* | hpux11*) +- lt_prog_compiler_wl_GCJ='-Wl,' +- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but +- # not for PA HP-UX. +- case $host_cpu in +- hppa*64*|ia64*) +- # +Z the default +- ;; +- *) +- lt_prog_compiler_pic_GCJ='+Z' +- ;; +- esac +- # Is there a better lt_prog_compiler_static that works with the bundled CC? +- lt_prog_compiler_static_GCJ='${wl}-a ${wl}archive' +- ;; + +- irix5* | irix6* | nonstopux*) +- lt_prog_compiler_wl_GCJ='-Wl,' +- # PIC (with -KPIC) is the default. +- lt_prog_compiler_static_GCJ='-non_shared' +- ;; ++if test $pkg_failed = yes; then + +- newsos6) +- lt_prog_compiler_pic_GCJ='-KPIC' +- lt_prog_compiler_static_GCJ='-Bstatic' +- ;; ++if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then ++ _pkg_short_errors_supported=yes ++else ++ _pkg_short_errors_supported=no ++fi ++ if test $_pkg_short_errors_supported = yes; then ++ GCONF_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "gconf-2.0"` ++ else ++ GCONF_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "gconf-2.0"` ++ fi ++ # Put the nasty error message in config.log where it belongs ++ echo "$GCONF_PKG_ERRORS" >&5 + +- linux* | k*bsd*-gnu) +- case $cc_basename in +- icc* | ecc*) +- lt_prog_compiler_wl_GCJ='-Wl,' +- lt_prog_compiler_pic_GCJ='-KPIC' +- lt_prog_compiler_static_GCJ='-static' +- ;; +- pgcc* | pgf77* | pgf90* | pgf95*) +- # Portland Group compilers (*not* the Pentium gcc compiler, +- # which looks to be a dead project) +- lt_prog_compiler_wl_GCJ='-Wl,' +- lt_prog_compiler_pic_GCJ='-fpic' +- lt_prog_compiler_static_GCJ='-Bstatic' +- ;; +- ccc*) +- lt_prog_compiler_wl_GCJ='-Wl,' +- # All Alpha code is PIC. +- lt_prog_compiler_static_GCJ='-non_shared' +- ;; +- *) +- case `$CC -V 2>&1 | sed 5q` in +- *Sun\ C*) +- # Sun C 5.9 +- lt_prog_compiler_pic_GCJ='-KPIC' +- lt_prog_compiler_static_GCJ='-Bstatic' +- lt_prog_compiler_wl_GCJ='-Wl,' +- ;; +- *Sun\ F*) +- # Sun Fortran 8.3 passes all unrecognized flags to the linker +- lt_prog_compiler_pic_GCJ='-KPIC' +- lt_prog_compiler_static_GCJ='-Bstatic' +- lt_prog_compiler_wl_GCJ='' +- ;; +- esac +- ;; +- esac +- ;; ++ { { echo "$as_me:$LINENO: error: Package requirements (gconf-2.0) were not met: + +- osf3* | osf4* | osf5*) +- lt_prog_compiler_wl_GCJ='-Wl,' +- # All OSF/1 code is PIC. +- lt_prog_compiler_static_GCJ='-non_shared' +- ;; ++$GCONF_PKG_ERRORS + +- rdos*) +- lt_prog_compiler_static_GCJ='-non_shared' +- ;; ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. + +- solaris*) +- lt_prog_compiler_pic_GCJ='-KPIC' +- lt_prog_compiler_static_GCJ='-Bstatic' +- case $cc_basename in +- f77* | f90* | f95*) +- lt_prog_compiler_wl_GCJ='-Qoption ld ';; +- *) +- lt_prog_compiler_wl_GCJ='-Wl,';; +- esac +- ;; ++Alternatively, you may set the environment variables GCONF_CFLAGS ++and GCONF_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&5 ++echo "$as_me: error: Package requirements (gconf-2.0) were not met: + +- sunos4*) +- lt_prog_compiler_wl_GCJ='-Qoption ld ' +- lt_prog_compiler_pic_GCJ='-PIC' +- lt_prog_compiler_static_GCJ='-Bstatic' +- ;; ++$GCONF_PKG_ERRORS + +- sysv4 | sysv4.2uw2* | sysv4.3*) +- lt_prog_compiler_wl_GCJ='-Wl,' +- lt_prog_compiler_pic_GCJ='-KPIC' +- lt_prog_compiler_static_GCJ='-Bstatic' +- ;; ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. + +- sysv4*MP*) +- if test -d /usr/nec ;then +- lt_prog_compiler_pic_GCJ='-Kconform_pic' +- lt_prog_compiler_static_GCJ='-Bstatic' +- fi +- ;; ++Alternatively, you may set the environment variables GCONF_CFLAGS ++and GCONF_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&2;} ++ { (exit 1); exit 1; }; } ++elif test $pkg_failed = untried; then ++ { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. + +- sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) +- lt_prog_compiler_wl_GCJ='-Wl,' +- lt_prog_compiler_pic_GCJ='-KPIC' +- lt_prog_compiler_static_GCJ='-Bstatic' +- ;; ++Alternatively, you may set the environment variables GCONF_CFLAGS ++and GCONF_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. + +- unicos*) +- lt_prog_compiler_wl_GCJ='-Wl,' +- lt_prog_compiler_can_build_shared_GCJ=no +- ;; ++To get pkg-config, see . ++See \`config.log' for more details." >&5 ++echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. + +- uts4*) +- lt_prog_compiler_pic_GCJ='-pic' +- lt_prog_compiler_static_GCJ='-Bstatic' +- ;; ++Alternatively, you may set the environment variables GCONF_CFLAGS ++and GCONF_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. + +- *) +- lt_prog_compiler_can_build_shared_GCJ=no +- ;; +- esac +- fi ++To get pkg-config, see . ++See \`config.log' for more details." >&2;} ++ { (exit 1); exit 1; }; } ++else ++ GCONF_CFLAGS=$pkg_cv_GCONF_CFLAGS ++ GCONF_LIBS=$pkg_cv_GCONF_LIBS ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++ : ++fi + +-{ $as_echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_GCJ" >&5 +-$as_echo "$lt_prog_compiler_pic_GCJ" >&6; } + +-# +-# Check to make sure the PIC flag actually works. +-# +-if test -n "$lt_prog_compiler_pic_GCJ"; then ++pkg_failed=no ++{ echo "$as_me:$LINENO: checking for EGG_SMCLIENT" >&5 ++echo $ECHO_N "checking for EGG_SMCLIENT... $ECHO_C" >&6; } + +-{ $as_echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works" >&5 +-$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works... " >&6; } +-if test "${lt_cv_prog_compiler_pic_works_GCJ+set}" = set; then +- $as_echo_n "(cached) " >&6 ++if test -n "$PKG_CONFIG"; then ++ if test -n "$EGG_SMCLIENT_CFLAGS"; then ++ pkg_cv_EGG_SMCLIENT_CFLAGS="$EGG_SMCLIENT_CFLAGS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"gtk+-2.0\"") >&5 ++ ($PKG_CONFIG --exists --print-errors "gtk+-2.0") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_EGG_SMCLIENT_CFLAGS=`$PKG_CONFIG --cflags "gtk+-2.0" 2>/dev/null` + else +- lt_cv_prog_compiler_pic_works_GCJ=no +- ac_outfile=conftest.$ac_objext +- echo "$lt_simple_compile_test_code" > conftest.$ac_ext +- lt_compiler_flag="$lt_prog_compiler_pic_GCJ" +- # Insert the option either (1) after the last *FLAGS variable, or +- # (2) before a word containing "conftest.", or (3) at the end. +- # Note that $ac_compile itself does not contain backslashes and begins +- # with a dollar sign (not a hyphen), so the echo should work correctly. +- # The option is referenced via a variable to avoid confusing sed. +- lt_compile=`echo "$ac_compile" | $SED \ +- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ +- -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ +- -e 's:$: $lt_compiler_flag:'` +- (eval echo "\"\$as_me:18956: $lt_compile\"" >&5) +- (eval "$lt_compile" 2>conftest.err) +- ac_status=$? +- cat conftest.err >&5 +- echo "$as_me:18960: \$? = $ac_status" >&5 +- if (exit $ac_status) && test -s "$ac_outfile"; then +- # The compiler can only warn and ignore the option if not recognized +- # So say no if there are warnings other than the usual output. +- $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp +- $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 +- if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then +- lt_cv_prog_compiler_pic_works_GCJ=yes +- fi +- fi +- $rm conftest* +- ++ pkg_failed=yes + fi +-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works_GCJ" >&5 +-$as_echo "$lt_cv_prog_compiler_pic_works_GCJ" >&6; } +- +-if test x"$lt_cv_prog_compiler_pic_works_GCJ" = xyes; then +- case $lt_prog_compiler_pic_GCJ in +- "" | " "*) ;; +- *) lt_prog_compiler_pic_GCJ=" $lt_prog_compiler_pic_GCJ" ;; +- esac ++ fi + else +- lt_prog_compiler_pic_GCJ= +- lt_prog_compiler_can_build_shared_GCJ=no +-fi +- ++ pkg_failed=untried + fi +-case $host_os in +- # For platforms which do not support PIC, -DPIC is meaningless: +- *djgpp*) +- lt_prog_compiler_pic_GCJ= +- ;; +- *) +- lt_prog_compiler_pic_GCJ="$lt_prog_compiler_pic_GCJ" +- ;; +-esac +- +-# +-# Check to make sure the static flag actually works. +-# +-wl=$lt_prog_compiler_wl_GCJ eval lt_tmp_static_flag=\"$lt_prog_compiler_static_GCJ\" +-{ $as_echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 +-$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; } +-if test "${lt_cv_prog_compiler_static_works_GCJ+set}" = set; then +- $as_echo_n "(cached) " >&6 ++if test -n "$PKG_CONFIG"; then ++ if test -n "$EGG_SMCLIENT_LIBS"; then ++ pkg_cv_EGG_SMCLIENT_LIBS="$EGG_SMCLIENT_LIBS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"gtk+-2.0\"") >&5 ++ ($PKG_CONFIG --exists --print-errors "gtk+-2.0") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_EGG_SMCLIENT_LIBS=`$PKG_CONFIG --libs "gtk+-2.0" 2>/dev/null` + else +- lt_cv_prog_compiler_static_works_GCJ=no +- save_LDFLAGS="$LDFLAGS" +- LDFLAGS="$LDFLAGS $lt_tmp_static_flag" +- echo "$lt_simple_link_test_code" > conftest.$ac_ext +- if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then +- # The linker can only warn and ignore the option if not recognized +- # So say no if there are warnings +- if test -s conftest.err; then +- # Append any errors to the config.log. +- cat conftest.err 1>&5 +- $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp +- $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 +- if diff conftest.exp conftest.er2 >/dev/null; then +- lt_cv_prog_compiler_static_works_GCJ=yes +- fi +- else +- lt_cv_prog_compiler_static_works_GCJ=yes +- fi +- fi +- $rm -r conftest* +- LDFLAGS="$save_LDFLAGS" +- ++ pkg_failed=yes + fi +-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works_GCJ" >&5 +-$as_echo "$lt_cv_prog_compiler_static_works_GCJ" >&6; } +- +-if test x"$lt_cv_prog_compiler_static_works_GCJ" = xyes; then +- : ++ fi + else +- lt_prog_compiler_static_GCJ= ++ pkg_failed=untried + fi + + +-{ $as_echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 +-$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } +-if test "${lt_cv_prog_compiler_c_o_GCJ+set}" = set; then +- $as_echo_n "(cached) " >&6 +-else +- lt_cv_prog_compiler_c_o_GCJ=no +- $rm -r conftest 2>/dev/null +- mkdir conftest +- cd conftest +- mkdir out +- echo "$lt_simple_compile_test_code" > conftest.$ac_ext +- +- lt_compiler_flag="-o out/conftest2.$ac_objext" +- # Insert the option either (1) after the last *FLAGS variable, or +- # (2) before a word containing "conftest.", or (3) at the end. +- # Note that $ac_compile itself does not contain backslashes and begins +- # with a dollar sign (not a hyphen), so the echo should work correctly. +- lt_compile=`echo "$ac_compile" | $SED \ +- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ +- -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ +- -e 's:$: $lt_compiler_flag:'` +- (eval echo "\"\$as_me:19060: $lt_compile\"" >&5) +- (eval "$lt_compile" 2>out/conftest.err) +- ac_status=$? +- cat out/conftest.err >&5 +- echo "$as_me:19064: \$? = $ac_status" >&5 +- if (exit $ac_status) && test -s out/conftest2.$ac_objext +- then +- # The compiler can only warn and ignore the option if not recognized +- # So say no if there are warnings +- $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp +- $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 +- if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then +- lt_cv_prog_compiler_c_o_GCJ=yes +- fi +- fi +- chmod u+w . 2>&5 +- $rm conftest* +- # SGI C++ compiler will create directory out/ii_files/ for +- # template instantiation +- test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files +- $rm out/* && rmdir out +- cd .. +- rmdir conftest +- $rm conftest* +- +-fi +-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_GCJ" >&5 +-$as_echo "$lt_cv_prog_compiler_c_o_GCJ" >&6; } + ++if test $pkg_failed = yes; then + +-hard_links="nottested" +-if test "$lt_cv_prog_compiler_c_o_GCJ" = no && test "$need_locks" != no; then +- # do not overwrite the value of need_locks provided by the user +- { $as_echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 +-$as_echo_n "checking if we can lock with hard links... " >&6; } +- hard_links=yes +- $rm conftest* +- ln conftest.a conftest.b 2>/dev/null && hard_links=no +- touch conftest.a +- ln conftest.a conftest.b 2>&5 || hard_links=no +- ln conftest.a conftest.b 2>/dev/null && hard_links=no +- { $as_echo "$as_me:$LINENO: result: $hard_links" >&5 +-$as_echo "$hard_links" >&6; } +- if test "$hard_links" = no; then +- { $as_echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 +-$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} +- need_locks=warn +- fi ++if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then ++ _pkg_short_errors_supported=yes + else +- need_locks=no ++ _pkg_short_errors_supported=no + fi ++ if test $_pkg_short_errors_supported = yes; then ++ EGG_SMCLIENT_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "gtk+-2.0"` ++ else ++ EGG_SMCLIENT_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "gtk+-2.0"` ++ fi ++ # Put the nasty error message in config.log where it belongs ++ echo "$EGG_SMCLIENT_PKG_ERRORS" >&5 + +-{ $as_echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 +-$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } ++ { { echo "$as_me:$LINENO: error: Package requirements (gtk+-2.0) were not met: + +- runpath_var= +- allow_undefined_flag_GCJ= +- enable_shared_with_static_runtimes_GCJ=no +- archive_cmds_GCJ= +- archive_expsym_cmds_GCJ= +- old_archive_From_new_cmds_GCJ= +- old_archive_from_expsyms_cmds_GCJ= +- export_dynamic_flag_spec_GCJ= +- whole_archive_flag_spec_GCJ= +- thread_safe_flag_spec_GCJ= +- hardcode_libdir_flag_spec_GCJ= +- hardcode_libdir_flag_spec_ld_GCJ= +- hardcode_libdir_separator_GCJ= +- hardcode_direct_GCJ=no +- hardcode_minus_L_GCJ=no +- hardcode_shlibpath_var_GCJ=unsupported +- link_all_deplibs_GCJ=unknown +- hardcode_automatic_GCJ=no +- module_cmds_GCJ= +- module_expsym_cmds_GCJ= +- always_export_symbols_GCJ=no +- export_symbols_cmds_GCJ='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' +- # include_expsyms should be a list of space-separated symbols to be *always* +- # included in the symbol list +- include_expsyms_GCJ= +- # exclude_expsyms can be an extended regexp of symbols to exclude +- # it will be wrapped by ` (' and `)$', so one must not match beginning or +- # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', +- # as well as any symbol that contains `d'. +- exclude_expsyms_GCJ='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' +- # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out +- # platforms (ab)use it in PIC code, but their linkers get confused if +- # the symbol is explicitly referenced. Since portable code cannot +- # rely on this symbol name, it's probably fine to never include it in +- # preloaded symbol tables. +- # Exclude shared library initialization/finalization symbols. +- extract_expsyms_cmds= +- # Just being paranoid about ensuring that cc_basename is set. +- for cc_temp in $compiler""; do +- case $cc_temp in +- compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; +- distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; +- \-*) ;; +- *) break;; +- esac +-done +-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` ++$EGG_SMCLIENT_PKG_ERRORS + +- case $host_os in +- cygwin* | mingw* | pw32*) +- # FIXME: the MSVC++ port hasn't been tested in a loooong time +- # When not using gcc, we currently assume that we are using +- # Microsoft Visual C++. +- if test "$GCC" != yes; then +- with_gnu_ld=no +- fi +- ;; +- interix*) +- # we just hope/assume this is gcc and not c89 (= MSVC++) +- with_gnu_ld=yes +- ;; +- openbsd*) +- with_gnu_ld=no +- ;; +- esac ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. + +- ld_shlibs_GCJ=yes +- if test "$with_gnu_ld" = yes; then +- # If archive_cmds runs LD, not CC, wlarc should be empty +- wlarc='${wl}' ++Alternatively, you may set the environment variables EGG_SMCLIENT_CFLAGS ++and EGG_SMCLIENT_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&5 ++echo "$as_me: error: Package requirements (gtk+-2.0) were not met: + +- # Set some defaults for GNU ld with shared library support. These +- # are reset later if shared libraries are not supported. Putting them +- # here allows them to be overridden if necessary. +- runpath_var=LD_RUN_PATH +- hardcode_libdir_flag_spec_GCJ='${wl}--rpath ${wl}$libdir' +- export_dynamic_flag_spec_GCJ='${wl}--export-dynamic' +- # ancient GNU ld didn't support --whole-archive et. al. +- if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then +- whole_archive_flag_spec_GCJ="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' +- else +- whole_archive_flag_spec_GCJ= +- fi +- supports_anon_versioning=no +- case `$LD -v 2>/dev/null` in +- *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 +- *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... +- *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... +- *\ 2.11.*) ;; # other 2.11 versions +- *) supports_anon_versioning=yes ;; +- esac ++$EGG_SMCLIENT_PKG_ERRORS + +- # See if GNU ld supports shared libraries. +- case $host_os in +- aix[3-9]*) +- # On AIX/PPC, the GNU linker is very broken +- if test "$host_cpu" != ia64; then +- ld_shlibs_GCJ=no +- cat <&2 ++Consider adjusting the PKG_CONFIG_PATH environment variable if you ++installed software in a non-standard prefix. + +-*** Warning: the GNU linker, at least up to release 2.9.1, is reported +-*** to be unable to reliably create shared libraries on AIX. +-*** Therefore, libtool is disabling shared libraries support. If you +-*** really care for shared libraries, you may want to modify your PATH +-*** so that a non-GNU linker is found, and then restart. ++Alternatively, you may set the environment variables EGG_SMCLIENT_CFLAGS ++and EGG_SMCLIENT_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. ++" >&2;} ++ { (exit 1); exit 1; }; } ++elif test $pkg_failed = untried; then ++ { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. + +-EOF +- fi +- ;; ++Alternatively, you may set the environment variables EGG_SMCLIENT_CFLAGS ++and EGG_SMCLIENT_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. + +- amigaos*) +- archive_cmds_GCJ='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' +- hardcode_libdir_flag_spec_GCJ='-L$libdir' +- hardcode_minus_L_GCJ=yes +- +- # Samuel A. Falvo II reports +- # that the semantics of dynamic libraries on AmigaOS, at least up +- # to version 4, is to share data among multiple programs linked +- # with the same dynamic library. Since this doesn't match the +- # behavior of shared libraries on other platforms, we can't use +- # them. +- ld_shlibs_GCJ=no +- ;; ++To get pkg-config, see . ++See \`config.log' for more details." >&5 ++echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it ++is in your PATH or set the PKG_CONFIG environment variable to the full ++path to pkg-config. + +- beos*) +- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then +- allow_undefined_flag_GCJ=unsupported +- # Joseph Beckenbach says some releases of gcc +- # support --undefined. This deserves some investigation. FIXME +- archive_cmds_GCJ='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- else +- ld_shlibs_GCJ=no +- fi +- ;; ++Alternatively, you may set the environment variables EGG_SMCLIENT_CFLAGS ++and EGG_SMCLIENT_LIBS to avoid the need to call pkg-config. ++See the pkg-config man page for more details. + +- cygwin* | mingw* | pw32*) +- # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, GCJ) is actually meaningless, +- # as there is no search path for DLLs. +- hardcode_libdir_flag_spec_GCJ='-L$libdir' +- allow_undefined_flag_GCJ=unsupported +- always_export_symbols_GCJ=no +- enable_shared_with_static_runtimes_GCJ=yes +- export_symbols_cmds_GCJ='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' ++To get pkg-config, see . ++See \`config.log' for more details." >&2;} ++ { (exit 1); exit 1; }; } ++else ++ EGG_SMCLIENT_CFLAGS=$pkg_cv_EGG_SMCLIENT_CFLAGS ++ EGG_SMCLIENT_LIBS=$pkg_cv_EGG_SMCLIENT_LIBS ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++ : ++fi + +- if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then +- archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' +- # If the export-symbols file already is a .def file (1st line +- # is EXPORTS), use it as is; otherwise, prepend... +- archive_expsym_cmds_GCJ='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then +- cp $export_symbols $output_objdir/$soname.def; +- else +- echo EXPORTS > $output_objdir/$soname.def; +- cat $export_symbols >> $output_objdir/$soname.def; +- fi~ +- $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' +- else +- ld_shlibs_GCJ=no +- fi +- ;; ++have_polkit=no ++# Check whether --enable-polkit was given. ++if test "${enable_polkit+set}" = set; then ++ enableval=$enable_polkit; enable_polkit=$enableval ++else ++ enable_polkit=auto ++fi + +- interix[3-9]*) +- hardcode_direct_GCJ=no +- hardcode_shlibpath_var_GCJ=no +- hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir' +- export_dynamic_flag_spec_GCJ='${wl}-E' +- # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. +- # Instead, shared libraries are loaded at an image base (0x10000000 by +- # default) and relocated if they conflict, which is a slow very memory +- # consuming and fragmenting process. To avoid this, we pick a random, +- # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link +- # time. Moving up from 0x10000000 also allows more sbrk(2) space. +- archive_cmds_GCJ='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' +- archive_expsym_cmds_GCJ='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' +- ;; ++if test "x$enable_polkit" != "xno"; then + +- gnu* | linux* | k*bsd*-gnu) +- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then +- tmp_addflag= +- case $cc_basename,$host_cpu in +- pgcc*) # Portland Group C compiler +- whole_archive_flag_spec_GCJ='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' +- tmp_addflag=' $pic_flag' +- ;; +- pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers +- whole_archive_flag_spec_GCJ='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' +- tmp_addflag=' $pic_flag -Mnomain' ;; +- ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 +- tmp_addflag=' -i_dynamic' ;; +- efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 +- tmp_addflag=' -i_dynamic -nofor_main' ;; +- ifc* | ifort*) # Intel Fortran compiler +- tmp_addflag=' -nofor_main' ;; +- esac +- case `$CC -V 2>&1 | sed 5q` in +- *Sun\ C*) # Sun C 5.9 +- whole_archive_flag_spec_GCJ='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' +- tmp_sharedflag='-G' ;; +- *Sun\ F*) # Sun Fortran 8.3 +- tmp_sharedflag='-G' ;; +- *) +- tmp_sharedflag='-shared' ;; +- esac +- archive_cmds_GCJ='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++pkg_failed=no ++{ echo "$as_me:$LINENO: checking for POLKIT_GNOME" >&5 ++echo $ECHO_N "checking for POLKIT_GNOME... $ECHO_C" >&6; } + +- if test $supports_anon_versioning = yes; then +- archive_expsym_cmds_GCJ='$echo "{ global:" > $output_objdir/$libname.ver~ +- cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ +- $echo "local: *; };" >> $output_objdir/$libname.ver~ +- $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' +- fi +- else +- ld_shlibs_GCJ=no +- fi +- ;; ++if test -n "$PKG_CONFIG"; then ++ if test -n "$POLKIT_GNOME_CFLAGS"; then ++ pkg_cv_POLKIT_GNOME_CFLAGS="$POLKIT_GNOME_CFLAGS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"polkit-gnome >= \$POLKIT_GNOME_REQUIRED\"") >&5 ++ ($PKG_CONFIG --exists --print-errors "polkit-gnome >= $POLKIT_GNOME_REQUIRED") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_POLKIT_GNOME_CFLAGS=`$PKG_CONFIG --cflags "polkit-gnome >= $POLKIT_GNOME_REQUIRED" 2>/dev/null` ++else ++ pkg_failed=yes ++fi ++ fi ++else ++ pkg_failed=untried ++fi ++if test -n "$PKG_CONFIG"; then ++ if test -n "$POLKIT_GNOME_LIBS"; then ++ pkg_cv_POLKIT_GNOME_LIBS="$POLKIT_GNOME_LIBS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"polkit-gnome >= \$POLKIT_GNOME_REQUIRED\"") >&5 ++ ($PKG_CONFIG --exists --print-errors "polkit-gnome >= $POLKIT_GNOME_REQUIRED") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_POLKIT_GNOME_LIBS=`$PKG_CONFIG --libs "polkit-gnome >= $POLKIT_GNOME_REQUIRED" 2>/dev/null` ++else ++ pkg_failed=yes ++fi ++ fi ++else ++ pkg_failed=untried ++fi + +- netbsd*) +- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then +- archive_cmds_GCJ='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' +- wlarc= +- else +- archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' +- fi +- ;; + +- solaris*) +- if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then +- ld_shlibs_GCJ=no +- cat <&2 + +-*** Warning: The releases 2.8.* of the GNU linker cannot reliably +-*** create shared libraries on Solaris systems. Therefore, libtool +-*** is disabling shared libraries support. We urge you to upgrade GNU +-*** binutils to release 2.9.1 or newer. Another option is to modify +-*** your PATH or compiler configuration so that the native linker is +-*** used, and then restart. ++if test $pkg_failed = yes; then + +-EOF +- elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then +- archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' +- else +- ld_shlibs_GCJ=no +- fi +- ;; ++if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then ++ _pkg_short_errors_supported=yes ++else ++ _pkg_short_errors_supported=no ++fi ++ if test $_pkg_short_errors_supported = yes; then ++ POLKIT_GNOME_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "polkit-gnome >= $POLKIT_GNOME_REQUIRED"` ++ else ++ POLKIT_GNOME_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "polkit-gnome >= $POLKIT_GNOME_REQUIRED"` ++ fi ++ # Put the nasty error message in config.log where it belongs ++ echo "$POLKIT_GNOME_PKG_ERRORS" >&5 + +- sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) +- case `$LD -v 2>&1` in +- *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) +- ld_shlibs_GCJ=no +- cat <<_LT_EOF 1>&2 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++ have_polkit=no ++elif test $pkg_failed = untried; then ++ have_polkit=no ++else ++ POLKIT_GNOME_CFLAGS=$pkg_cv_POLKIT_GNOME_CFLAGS ++ POLKIT_GNOME_LIBS=$pkg_cv_POLKIT_GNOME_LIBS ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++ have_polkit=yes ++fi ++ if test "x$enable_polkit" = "xyes" -a "x$have_polkit" = "xno"; then ++ { { echo "$as_me:$LINENO: error: PolicyKit support explicitly requested but dependencies not found" >&5 ++echo "$as_me: error: PolicyKit support explicitly requested but dependencies not found" >&2;} ++ { (exit 1); exit 1; }; } ++ fi ++fi + +-*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not +-*** reliably create shared libraries on SCO systems. Therefore, libtool +-*** is disabling shared libraries support. We urge you to upgrade GNU +-*** binutils to release 2.16.91.0.3 or newer. Another option is to modify +-*** your PATH or compiler configuration so that the native linker is +-*** used, and then restart. ++if test "x$have_polkit" = "xyes"; then + +-_LT_EOF +- ;; +- *) +- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then +- hardcode_libdir_flag_spec_GCJ='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`' +- archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib' +- archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib' +- else +- ld_shlibs_GCJ=no +- fi +- ;; +- esac +- ;; ++cat >>confdefs.h <<\_ACEOF ++#define HAVE_POLKIT_GNOME 1 ++_ACEOF + +- sunos4*) +- archive_cmds_GCJ='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' +- wlarc= +- hardcode_direct_GCJ=yes +- hardcode_shlibpath_var_GCJ=no +- ;; ++fi + +- *) +- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then +- archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' +- else +- ld_shlibs_GCJ=no +- fi +- ;; +- esac ++# Extract the first word of "gconftool-2", so it can be a program name with args. ++set dummy gconftool-2; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_path_GCONFTOOL+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ case $GCONFTOOL in ++ [\\/]* | ?:[\\/]*) ++ ac_cv_path_GCONFTOOL="$GCONFTOOL" # Let the user override the test with a path. ++ ;; ++ *) ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_path_GCONFTOOL="$as_dir/$ac_word$ac_exec_ext" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS + +- if test "$ld_shlibs_GCJ" = no; then +- runpath_var= +- hardcode_libdir_flag_spec_GCJ= +- export_dynamic_flag_spec_GCJ= +- whole_archive_flag_spec_GCJ= +- fi +- else +- # PORTME fill in a description of your system's linker (not GNU ld) +- case $host_os in +- aix3*) +- allow_undefined_flag_GCJ=unsupported +- always_export_symbols_GCJ=yes +- archive_expsym_cmds_GCJ='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' +- # Note: this linker hardcodes the directories in LIBPATH if there +- # are no directories specified by -L. +- hardcode_minus_L_GCJ=yes +- if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then +- # Neither direct hardcoding nor static linking is supported with a +- # broken collect2. +- hardcode_direct_GCJ=unsupported +- fi +- ;; ++ test -z "$ac_cv_path_GCONFTOOL" && ac_cv_path_GCONFTOOL="no" ++ ;; ++esac ++fi ++GCONFTOOL=$ac_cv_path_GCONFTOOL ++if test -n "$GCONFTOOL"; then ++ { echo "$as_me:$LINENO: result: $GCONFTOOL" >&5 ++echo "${ECHO_T}$GCONFTOOL" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi + +- aix[4-9]*) +- if test "$host_cpu" = ia64; then +- # On IA64, the linker does run time linking by default, so we don't +- # have to do anything special. +- aix_use_runtimelinking=no +- exp_sym_flag='-Bexport' +- no_entry_flag="" +- else +- # If we're using GNU nm, then we don't want the "-C" option. +- # -C means demangle to AIX nm, but means don't demangle with GNU nm +- if $NM -V 2>&1 | grep 'GNU' > /dev/null; then +- export_symbols_cmds_GCJ='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' +- else +- export_symbols_cmds_GCJ='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' +- fi +- aix_use_runtimelinking=no + +- # Test if we are trying to use run time linking or normal +- # AIX style linking. If -brtl is somewhere in LDFLAGS, we +- # need to do runtime linking. +- case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) +- for ld_flag in $LDFLAGS; do +- if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then +- aix_use_runtimelinking=yes +- break +- fi +- done +- ;; +- esac ++if test x"$GCONFTOOL" = xno; then ++ { { echo "$as_me:$LINENO: error: gconftool-2 executable not found in your path - should be installed with GConf" >&5 ++echo "$as_me: error: gconftool-2 executable not found in your path - should be installed with GConf" >&2;} ++ { (exit 1); exit 1; }; } ++fi + +- exp_sym_flag='-bexport' +- no_entry_flag='-bnoentry' +- fi + +- # When large executables or shared objects are built, AIX ld can +- # have problems creating the table of contents. If linking a library +- # or program results in "error TOC overflow" add -mminimal-toc to +- # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not +- # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. ++ if test "x$GCONF_SCHEMA_INSTALL_SOURCE" = "x"; then ++ GCONF_SCHEMA_CONFIG_SOURCE=`gconftool-2 --get-default-source` ++ else ++ GCONF_SCHEMA_CONFIG_SOURCE=$GCONF_SCHEMA_INSTALL_SOURCE ++ fi + +- archive_cmds_GCJ='' +- hardcode_direct_GCJ=yes +- hardcode_libdir_separator_GCJ=':' +- link_all_deplibs_GCJ=yes + +- if test "$GCC" = yes; then +- case $host_os in aix4.[012]|aix4.[012].*) +- # We only want to do this on AIX 4.2 and lower, the check +- # below for broken collect2 doesn't work under 4.3+ +- collect2name=`${CC} -print-prog-name=collect2` +- if test -f "$collect2name" && \ +- strings "$collect2name" | grep resolve_lib_name >/dev/null +- then +- # We have reworked collect2 +- : +- else +- # We have old collect2 +- hardcode_direct_GCJ=unsupported +- # It fails to find uninstalled libraries when the uninstalled +- # path is not listed in the libpath. Setting hardcode_minus_L +- # to unsupported forces relinking +- hardcode_minus_L_GCJ=yes +- hardcode_libdir_flag_spec_GCJ='-L$libdir' +- hardcode_libdir_separator_GCJ= +- fi +- ;; +- esac +- shared_flag='-shared' +- if test "$aix_use_runtimelinking" = yes; then +- shared_flag="$shared_flag "'${wl}-G' +- fi +- else +- # not using gcc +- if test "$host_cpu" = ia64; then +- # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release +- # chokes on -Wl,-G. The following line is correct: +- shared_flag='-G' +- else +- if test "$aix_use_runtimelinking" = yes; then +- shared_flag='${wl}-G' +- else +- shared_flag='${wl}-bM:SRE' +- fi +- fi +- fi ++# Check whether --with-gconf-source was given. ++if test "${with_gconf_source+set}" = set; then ++ withval=$with_gconf_source; GCONF_SCHEMA_CONFIG_SOURCE="$withval" ++fi + +- # It seems that -bexpall does not export symbols beginning with +- # underscore (_), so it is better to generate a list of symbols to export. +- always_export_symbols_GCJ=yes +- if test "$aix_use_runtimelinking" = yes; then +- # Warning - without using the other runtime loading flags (-brtl), +- # -berok will link without error, but may produce a broken library. +- allow_undefined_flag_GCJ='-berok' +- # Determine the default libpath from the value encoded in an empty executable. +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ + +-int +-main () +-{ + +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then ++ { echo "$as_me:$LINENO: result: Using config source $GCONF_SCHEMA_CONFIG_SOURCE for schema installation" >&5 ++echo "${ECHO_T}Using config source $GCONF_SCHEMA_CONFIG_SOURCE for schema installation" >&6; } + +-lt_aix_libpath_sed=' +- /Import File Strings/,/^$/ { +- /^0/ { +- s/^0 *\(.*\)$/\1/ +- p +- } +- }' +-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +-# Check for a 64-bit object if we didn't find anything. +-if test -z "$aix_libpath"; then +- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` ++ if test "x$GCONF_SCHEMA_FILE_DIR" = "x"; then ++ GCONF_SCHEMA_FILE_DIR='$(sysconfdir)/gconf/schemas' ++ fi ++ ++ ++# Check whether --with-gconf-schema-file-dir was given. ++if test "${with_gconf_schema_file_dir+set}" = set; then ++ withval=$with_gconf_schema_file_dir; GCONF_SCHEMA_FILE_DIR="$withval" ++fi ++ ++ ++ ++ { echo "$as_me:$LINENO: result: Using $GCONF_SCHEMA_FILE_DIR as install directory for schema files" >&5 ++echo "${ECHO_T}Using $GCONF_SCHEMA_FILE_DIR as install directory for schema files" >&6; } ++ ++ # Check whether --enable-schemas-install was given. ++if test "${enable_schemas_install+set}" = set; then ++ enableval=$enable_schemas_install; case ${enableval} in ++ yes|no) ;; ++ *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for --enable-schemas-install" >&5 ++echo "$as_me: error: bad value ${enableval} for --enable-schemas-install" >&2;} ++ { (exit 1); exit 1; }; } ;; ++ esac + fi ++ ++ if test "$enable_schemas_install" != no; then ++ GCONF_SCHEMAS_INSTALL_TRUE= ++ GCONF_SCHEMAS_INSTALL_FALSE='#' + else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++ GCONF_SCHEMAS_INSTALL_TRUE='#' ++ GCONF_SCHEMAS_INSTALL_FALSE= ++fi + + ++ ++GCONF_SERVERDIR=`$PKG_CONFIG --variable=gconf_serverdir gconf-2.0` ++old_path=$PATH ++if test x"$GCONF_SERVERDIR" != x; then ++ PATH=$GCONF_SERVERDIR:$PATH + fi + +-rm -rf conftest.dSYM +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext +-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi ++# Extract the first word of "gconf-sanity-check-2", so it can be a program name with args. ++set dummy gconf-sanity-check-2; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_path_GCONF_SANITY_CHECK+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ case $GCONF_SANITY_CHECK in ++ [\\/]* | ?:[\\/]*) ++ ac_cv_path_GCONF_SANITY_CHECK="$GCONF_SANITY_CHECK" # Let the user override the test with a path. ++ ;; ++ *) ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_path_GCONF_SANITY_CHECK="$as_dir/$ac_word$ac_exec_ext" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS + +- hardcode_libdir_flag_spec_GCJ='${wl}-blibpath:$libdir:'"$aix_libpath" +- archive_expsym_cmds_GCJ="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" +- else +- if test "$host_cpu" = ia64; then +- hardcode_libdir_flag_spec_GCJ='${wl}-R $libdir:/usr/lib:/lib' +- allow_undefined_flag_GCJ="-z nodefs" +- archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" +- else +- # Determine the default libpath from the value encoded in an empty executable. +- cat >conftest.$ac_ext <<_ACEOF ++ test -z "$ac_cv_path_GCONF_SANITY_CHECK" && ac_cv_path_GCONF_SANITY_CHECK="no" ++ ;; ++esac ++fi ++GCONF_SANITY_CHECK=$ac_cv_path_GCONF_SANITY_CHECK ++if test -n "$GCONF_SANITY_CHECK"; then ++ { echo "$as_me:$LINENO: result: $GCONF_SANITY_CHECK" >&5 ++echo "${ECHO_T}$GCONF_SANITY_CHECK" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++if test x"$GCONF_SANITY_CHECK" = xno; then ++ { { echo "$as_me:$LINENO: error: gconf-sanity-check-2 executable not found in your path - should be installed with GConf" >&5 ++echo "$as_me: error: gconf-sanity-check-2 executable not found in your path - should be installed with GConf" >&2;} ++ { (exit 1); exit 1; }; } ++fi ++ ++ ++PATH=$old_path ++ ++ ++# If Pango included the shared library dependencies from X11 in ++# the pkg-config output, then we use that (to avoid duplicates). ++# but if they were omitted to avoid binary compatibility problems ++# then we need to repeat the checks. ++ ++if $PKG_CONFIG --exists pangoxft ; then ++ PANGO_PACKAGES="pangox pangoxft" ++else ++ PANGO_PACKAGES="pangox" ++fi ++ ++x_libs="`$PKG_CONFIG --libs $PANGO_PACKAGES`" ++case x_libs in ++ *-lX11*) pango_omitted_x_deps=no ;; ++ *) pango_omitted_x_deps=yes ;; ++esac ++ ++if test $pango_omitted_x_deps = yes ; then ++ { echo "$as_me:$LINENO: checking for X" >&5 ++echo $ECHO_N "checking for X... $ECHO_C" >&6; } ++ ++ ++# Check whether --with-x was given. ++if test "${with_x+set}" = set; then ++ withval=$with_x; ++fi ++ ++# $have_x is `yes', `no', `disabled', or empty when we do not yet know. ++if test "x$with_x" = xno; then ++ # The user explicitly disabled X. ++ have_x=disabled ++else ++ case $x_includes,$x_libraries in #( ++ *\'*) { { echo "$as_me:$LINENO: error: Cannot use X directory names containing '" >&5 ++echo "$as_me: error: Cannot use X directory names containing '" >&2;} ++ { (exit 1); exit 1; }; };; #( ++ *,NONE | NONE,*) if test "${ac_cv_have_x+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ # One or both of the vars are not set, and there is no cached value. ++ac_x_includes=no ac_x_libraries=no ++rm -f -r conftest.dir ++if mkdir conftest.dir; then ++ cd conftest.dir ++ cat >Imakefile <<'_ACEOF' ++incroot: ++ @echo incroot='${INCROOT}' ++usrlibdir: ++ @echo usrlibdir='${USRLIBDIR}' ++libdir: ++ @echo libdir='${LIBDIR}' ++_ACEOF ++ if (export CC; ${XMKMF-xmkmf}) >/dev/null 2>/dev/null && test -f Makefile; then ++ # GNU make sometimes prints "make[1]: Entering...", which would confuse us. ++ for ac_var in incroot usrlibdir libdir; do ++ eval "ac_im_$ac_var=\`\${MAKE-make} $ac_var 2>/dev/null | sed -n 's/^$ac_var=//p'\`" ++ done ++ # Open Windows xmkmf reportedly sets LIBDIR instead of USRLIBDIR. ++ for ac_extension in a so sl; do ++ if test ! -f "$ac_im_usrlibdir/libX11.$ac_extension" && ++ test -f "$ac_im_libdir/libX11.$ac_extension"; then ++ ac_im_usrlibdir=$ac_im_libdir; break ++ fi ++ done ++ # Screen out bogus values from the imake configuration. They are ++ # bogus both because they are the default anyway, and because ++ # using them would break gcc on systems where it needs fixed includes. ++ case $ac_im_incroot in ++ /usr/include) ac_x_includes= ;; ++ *) test -f "$ac_im_incroot/X11/Xos.h" && ac_x_includes=$ac_im_incroot;; ++ esac ++ case $ac_im_usrlibdir in ++ /usr/lib | /lib) ;; ++ *) test -d "$ac_im_usrlibdir" && ac_x_libraries=$ac_im_usrlibdir ;; ++ esac ++ fi ++ cd .. ++ rm -f -r conftest.dir ++fi ++ ++# Standard set of common directories for X headers. ++# Check X11 before X11Rn because it is often a symlink to the current release. ++ac_x_header_dirs=' ++/usr/X11/include ++/usr/X11R6/include ++/usr/X11R5/include ++/usr/X11R4/include ++ ++/usr/include/X11 ++/usr/include/X11R6 ++/usr/include/X11R5 ++/usr/include/X11R4 ++ ++/usr/local/X11/include ++/usr/local/X11R6/include ++/usr/local/X11R5/include ++/usr/local/X11R4/include ++ ++/usr/local/include/X11 ++/usr/local/include/X11R6 ++/usr/local/include/X11R5 ++/usr/local/include/X11R4 ++ ++/usr/X386/include ++/usr/x386/include ++/usr/XFree86/include/X11 ++ ++/usr/include ++/usr/local/include ++/usr/unsupported/include ++/usr/athena/include ++/usr/local/x11r5/include ++/usr/lpp/Xamples/include ++ ++/usr/openwin/include ++/usr/openwin/share/include' ++ ++if test "$ac_x_includes" = no; then ++ # Guess where to find include files, by looking for Xlib.h. ++ # First, try using that file with no special directory specified. ++ cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ ++#include ++_ACEOF ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } >/dev/null && { ++ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || ++ test ! -s conftest.err ++ }; then ++ # We can compile using X headers with no special include directory. ++ac_x_includes= ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ for ac_dir in $ac_x_header_dirs; do ++ if test -r "$ac_dir/X11/Xlib.h"; then ++ ac_x_includes=$ac_dir ++ break ++ fi ++done ++fi + ++rm -f conftest.err conftest.$ac_ext ++fi # $ac_x_includes = no ++ ++if test "$ac_x_libraries" = no; then ++ # Check for the libraries. ++ # See if we find them without any special options. ++ # Don't add to $LIBS permanently. ++ ac_save_LIBS=$LIBS ++ LIBS="-lX11 $LIBS" ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++#include + int + main () + { +- ++XrmInitialize () + ; + return 0; + } +@@ -19610,3998 +14413,1241 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then +- +-lt_aix_libpath_sed=' +- /Import File Strings/,/^$/ { +- /^0/ { +- s/^0 *\(.*\)$/\1/ +- p +- } +- }' +-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +-# Check for a 64-bit object if we didn't find anything. +-if test -z "$aix_libpath"; then +- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +-fi +-else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ LIBS=$ac_save_LIBS ++# We can link X programs with no special library path. ++ac_x_libraries= ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 + ++ LIBS=$ac_save_LIBS ++for ac_dir in `echo "$ac_x_includes $ac_x_header_dirs" | sed s/include/lib/g` ++do ++ # Don't even attempt the hair of trying to link an X program! ++ for ac_extension in a so sl; do ++ if test -r "$ac_dir/libX11.$ac_extension"; then ++ ac_x_libraries=$ac_dir ++ break 2 ++ fi ++ done ++done + fi + +-rm -rf conftest.dSYM + rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi +- +- hardcode_libdir_flag_spec_GCJ='${wl}-blibpath:$libdir:'"$aix_libpath" +- # Warning - without using the other run time loading flags, +- # -berok will link without error, but may produce a broken library. +- no_undefined_flag_GCJ=' ${wl}-bernotok' +- allow_undefined_flag_GCJ=' ${wl}-berok' +- # Exported symbols can be pulled into shared objects from archives +- whole_archive_flag_spec_GCJ='$convenience' +- archive_cmds_need_lc_GCJ=yes +- # This is similar to how AIX traditionally builds its shared libraries. +- archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' +- fi +- fi +- ;; +- +- amigaos*) +- archive_cmds_GCJ='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' +- hardcode_libdir_flag_spec_GCJ='-L$libdir' +- hardcode_minus_L_GCJ=yes +- # see comment about different semantics on the GNU ld section +- ld_shlibs_GCJ=no +- ;; ++fi # $ac_x_libraries = no + +- bsdi[45]*) +- export_dynamic_flag_spec_GCJ=-rdynamic +- ;; ++case $ac_x_includes,$ac_x_libraries in #( ++ no,* | *,no | *\'*) ++ # Didn't find X, or a directory has "'" in its name. ++ ac_cv_have_x="have_x=no";; #( ++ *) ++ # Record where we found X for the cache. ++ ac_cv_have_x="have_x=yes\ ++ ac_x_includes='$ac_x_includes'\ ++ ac_x_libraries='$ac_x_libraries'" ++esac ++fi ++;; #( ++ *) have_x=yes;; ++ esac ++ eval "$ac_cv_have_x" ++fi # $with_x != no + +- cygwin* | mingw* | pw32*) +- # When not using gcc, we currently assume that we are using +- # Microsoft Visual C++. +- # hardcode_libdir_flag_spec is actually meaningless, as there is +- # no search path for DLLs. +- hardcode_libdir_flag_spec_GCJ=' ' +- allow_undefined_flag_GCJ=unsupported +- # Tell ltmain to make .lib files, not .a files. +- libext=lib +- # Tell ltmain to make .dll files, not .so files. +- shrext_cmds=".dll" +- # FIXME: Setting linknames here is a bad hack. +- archive_cmds_GCJ='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames=' +- # The linker will automatically build a .lib file if we build a DLL. +- old_archive_From_new_cmds_GCJ='true' +- # FIXME: Should let the user specify the lib program. +- old_archive_cmds_GCJ='lib -OUT:$oldlib$oldobjs$old_deplibs' +- fix_srcfile_path_GCJ='`cygpath -w "$srcfile"`' +- enable_shared_with_static_runtimes_GCJ=yes +- ;; ++if test "$have_x" != yes; then ++ { echo "$as_me:$LINENO: result: $have_x" >&5 ++echo "${ECHO_T}$have_x" >&6; } ++ no_x=yes ++else ++ # If each of the values was on the command line, it overrides each guess. ++ test "x$x_includes" = xNONE && x_includes=$ac_x_includes ++ test "x$x_libraries" = xNONE && x_libraries=$ac_x_libraries ++ # Update the cache value to reflect the command line values. ++ ac_cv_have_x="have_x=yes\ ++ ac_x_includes='$x_includes'\ ++ ac_x_libraries='$x_libraries'" ++ { echo "$as_me:$LINENO: result: libraries $x_libraries, headers $x_includes" >&5 ++echo "${ECHO_T}libraries $x_libraries, headers $x_includes" >&6; } ++fi + +- darwin* | rhapsody*) +- case $host_os in +- rhapsody* | darwin1.[012]) +- allow_undefined_flag_GCJ='${wl}-undefined ${wl}suppress' +- ;; +- *) # Darwin 1.3 on +- if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then +- allow_undefined_flag_GCJ='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' +- else +- case ${MACOSX_DEPLOYMENT_TARGET} in +- 10.[012]) +- allow_undefined_flag_GCJ='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' +- ;; +- 10.*) +- allow_undefined_flag_GCJ='${wl}-undefined ${wl}dynamic_lookup' +- ;; +- esac +- fi +- ;; +- esac +- archive_cmds_need_lc_GCJ=no +- hardcode_direct_GCJ=no +- hardcode_automatic_GCJ=yes +- hardcode_shlibpath_var_GCJ=unsupported +- whole_archive_flag_spec_GCJ='' +- link_all_deplibs_GCJ=yes +- if test "$GCC" = yes ; then +- output_verbose_link_cmd='echo' +- archive_cmds_GCJ="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" +- module_cmds_GCJ="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" +- archive_expsym_cmds_GCJ="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" +- module_expsym_cmds_GCJ="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" +- else +- case $cc_basename in +- xlc*) +- output_verbose_link_cmd='echo' +- archive_cmds_GCJ='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring' +- module_cmds_GCJ='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' +- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds +- archive_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' +- module_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' +- ;; +- *) +- ld_shlibs_GCJ=no +- ;; +- esac +- fi +- ;; ++if test "$no_x" = yes; then ++ # Not all programs may use this symbol, but it does not hurt to define it. + +- dgux*) +- archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- hardcode_libdir_flag_spec_GCJ='-L$libdir' +- hardcode_shlibpath_var_GCJ=no +- ;; ++cat >>confdefs.h <<\_ACEOF ++#define X_DISPLAY_MISSING 1 ++_ACEOF + +- freebsd1*) +- ld_shlibs_GCJ=no +- ;; ++ X_CFLAGS= X_PRE_LIBS= X_LIBS= X_EXTRA_LIBS= ++else ++ if test -n "$x_includes"; then ++ X_CFLAGS="$X_CFLAGS -I$x_includes" ++ fi + +- # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor +- # support. Future versions do this automatically, but an explicit c++rt0.o +- # does not break anything, and helps significantly (at the cost of a little +- # extra space). +- freebsd2.2*) +- archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' +- hardcode_libdir_flag_spec_GCJ='-R$libdir' +- hardcode_direct_GCJ=yes +- hardcode_shlibpath_var_GCJ=no +- ;; ++ # It would also be nice to do this for all -L options, not just this one. ++ if test -n "$x_libraries"; then ++ X_LIBS="$X_LIBS -L$x_libraries" ++ # For Solaris; some versions of Sun CC require a space after -R and ++ # others require no space. Words are not sufficient . . . . ++ { echo "$as_me:$LINENO: checking whether -R must be followed by a space" >&5 ++echo $ECHO_N "checking whether -R must be followed by a space... $ECHO_C" >&6; } ++ ac_xsave_LIBS=$LIBS; LIBS="$LIBS -R$x_libraries" ++ ac_xsave_c_werror_flag=$ac_c_werror_flag ++ ac_c_werror_flag=yes ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ + +- # Unfortunately, older versions of FreeBSD 2 do not have this feature. +- freebsd2*) +- archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' +- hardcode_direct_GCJ=yes +- hardcode_minus_L_GCJ=yes +- hardcode_shlibpath_var_GCJ=no +- ;; ++int ++main () ++{ + +- # FreeBSD 3 and greater uses gcc -shared to do shared libraries. +- freebsd* | dragonfly*) +- archive_cmds_GCJ='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' +- hardcode_libdir_flag_spec_GCJ='-R$libdir' +- hardcode_direct_GCJ=yes +- hardcode_shlibpath_var_GCJ=no +- ;; ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++ X_LIBS="$X_LIBS -R$x_libraries" ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 + +- hpux9*) +- if test "$GCC" = yes; then +- archive_cmds_GCJ='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' +- else +- archive_cmds_GCJ='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' +- fi +- hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir' +- hardcode_libdir_separator_GCJ=: +- hardcode_direct_GCJ=yes ++ LIBS="$ac_xsave_LIBS -R $x_libraries" ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ + +- # hardcode_minus_L: Not really in the search PATH, +- # but as the default location of the library. +- hardcode_minus_L_GCJ=yes +- export_dynamic_flag_spec_GCJ='${wl}-E' +- ;; ++int ++main () ++{ + +- hpux10*) +- if test "$GCC" = yes -a "$with_gnu_ld" = no; then +- archive_cmds_GCJ='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' +- else +- archive_cmds_GCJ='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' +- fi +- if test "$with_gnu_ld" = no; then +- hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir' +- hardcode_libdir_separator_GCJ=: ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++ X_LIBS="$X_LIBS -R $x_libraries" ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 + +- hardcode_direct_GCJ=yes +- export_dynamic_flag_spec_GCJ='${wl}-E' ++ { echo "$as_me:$LINENO: result: neither works" >&5 ++echo "${ECHO_T}neither works" >&6; } ++fi + +- # hardcode_minus_L: Not really in the search PATH, +- # but as the default location of the library. +- hardcode_minus_L_GCJ=yes +- fi +- ;; ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++fi + +- hpux11*) +- if test "$GCC" = yes -a "$with_gnu_ld" = no; then +- case $host_cpu in +- hppa*64*) +- archive_cmds_GCJ='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' +- ;; +- ia64*) +- archive_cmds_GCJ='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' +- ;; +- *) +- archive_cmds_GCJ='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' +- ;; +- esac +- else +- case $host_cpu in +- hppa*64*) +- archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' +- ;; +- ia64*) +- archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' +- ;; +- *) +- archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' +- ;; +- esac +- fi +- if test "$with_gnu_ld" = no; then +- hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir' +- hardcode_libdir_separator_GCJ=: ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++ ac_c_werror_flag=$ac_xsave_c_werror_flag ++ LIBS=$ac_xsave_LIBS ++ fi + +- case $host_cpu in +- hppa*64*|ia64*) +- hardcode_libdir_flag_spec_ld_GCJ='+b $libdir' +- hardcode_direct_GCJ=no +- hardcode_shlibpath_var_GCJ=no +- ;; +- *) +- hardcode_direct_GCJ=yes +- export_dynamic_flag_spec_GCJ='${wl}-E' ++ # Check for system-dependent libraries X programs must link with. ++ # Do this before checking for the system-independent R6 libraries ++ # (-lICE), since we may need -lsocket or whatever for X linking. + +- # hardcode_minus_L: Not really in the search PATH, +- # but as the default location of the library. +- hardcode_minus_L_GCJ=yes +- ;; +- esac +- fi +- ;; ++ if test "$ISC" = yes; then ++ X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl_s -linet" ++ else ++ # Martyn Johnson says this is needed for Ultrix, if the X ++ # libraries were built with DECnet support. And Karl Berry says ++ # the Alpha needs dnet_stub (dnet does not exist). ++ ac_xsave_LIBS="$LIBS"; LIBS="$LIBS $X_LIBS -lX11" ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ + +- irix5* | irix6* | nonstopux*) +- if test "$GCC" = yes; then +- archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' +- else +- archive_cmds_GCJ='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' +- hardcode_libdir_flag_spec_ld_GCJ='-rpath $libdir' +- fi +- hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir' +- hardcode_libdir_separator_GCJ=: +- link_all_deplibs_GCJ=yes +- ;; ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char XOpenDisplay (); ++int ++main () ++{ ++return XOpenDisplay (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ : ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 + +- netbsd*) +- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then +- archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out +- else +- archive_cmds_GCJ='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF +- fi +- hardcode_libdir_flag_spec_GCJ='-R$libdir' +- hardcode_direct_GCJ=yes +- hardcode_shlibpath_var_GCJ=no +- ;; ++ { echo "$as_me:$LINENO: checking for dnet_ntoa in -ldnet" >&5 ++echo $ECHO_N "checking for dnet_ntoa in -ldnet... $ECHO_C" >&6; } ++if test "${ac_cv_lib_dnet_dnet_ntoa+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-ldnet $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ + +- newsos6) +- archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- hardcode_direct_GCJ=yes +- hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir' +- hardcode_libdir_separator_GCJ=: +- hardcode_shlibpath_var_GCJ=no +- ;; ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char dnet_ntoa (); ++int ++main () ++{ ++return dnet_ntoa (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_dnet_dnet_ntoa=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 + +- openbsd*) +- if test -f /usr/libexec/ld.so; then +- hardcode_direct_GCJ=yes +- hardcode_shlibpath_var_GCJ=no +- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then +- archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' +- archive_expsym_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' +- hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir' +- export_dynamic_flag_spec_GCJ='${wl}-E' +- else +- case $host_os in +- openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) +- archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' +- hardcode_libdir_flag_spec_GCJ='-R$libdir' +- ;; +- *) +- archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' +- hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir' +- ;; +- esac +- fi +- else +- ld_shlibs_GCJ=no +- fi +- ;; ++ ac_cv_lib_dnet_dnet_ntoa=no ++fi + +- os2*) +- hardcode_libdir_flag_spec_GCJ='-L$libdir' +- hardcode_minus_L_GCJ=yes +- allow_undefined_flag_GCJ=unsupported +- archive_cmds_GCJ='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' +- old_archive_From_new_cmds_GCJ='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' +- ;; ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_dnet_dnet_ntoa" >&5 ++echo "${ECHO_T}$ac_cv_lib_dnet_dnet_ntoa" >&6; } ++if test $ac_cv_lib_dnet_dnet_ntoa = yes; then ++ X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet" ++fi + +- osf3*) +- if test "$GCC" = yes; then +- allow_undefined_flag_GCJ=' ${wl}-expect_unresolved ${wl}\*' +- archive_cmds_GCJ='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' +- else +- allow_undefined_flag_GCJ=' -expect_unresolved \*' +- archive_cmds_GCJ='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' +- fi +- hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir' +- hardcode_libdir_separator_GCJ=: +- ;; ++ if test $ac_cv_lib_dnet_dnet_ntoa = no; then ++ { echo "$as_me:$LINENO: checking for dnet_ntoa in -ldnet_stub" >&5 ++echo $ECHO_N "checking for dnet_ntoa in -ldnet_stub... $ECHO_C" >&6; } ++if test "${ac_cv_lib_dnet_stub_dnet_ntoa+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-ldnet_stub $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ + +- osf4* | osf5*) # as osf3* with the addition of -msym flag +- if test "$GCC" = yes; then +- allow_undefined_flag_GCJ=' ${wl}-expect_unresolved ${wl}\*' +- archive_cmds_GCJ='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' +- hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir' +- else +- allow_undefined_flag_GCJ=' -expect_unresolved \*' +- archive_cmds_GCJ='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' +- archive_expsym_cmds_GCJ='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ +- $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp' ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char dnet_ntoa (); ++int ++main () ++{ ++return dnet_ntoa (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_dnet_stub_dnet_ntoa=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 + +- # Both c and cxx compiler support -rpath directly +- hardcode_libdir_flag_spec_GCJ='-rpath $libdir' +- fi +- hardcode_libdir_separator_GCJ=: +- ;; ++ ac_cv_lib_dnet_stub_dnet_ntoa=no ++fi + +- solaris*) +- no_undefined_flag_GCJ=' -z text' +- if test "$GCC" = yes; then +- wlarc='${wl}' +- archive_cmds_GCJ='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' +- archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ +- $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp' +- else +- wlarc='' +- archive_cmds_GCJ='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' +- archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ +- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' +- fi +- hardcode_libdir_flag_spec_GCJ='-R$libdir' +- hardcode_shlibpath_var_GCJ=no +- case $host_os in +- solaris2.[0-5] | solaris2.[0-5].*) ;; +- *) +- # The compiler driver will combine and reorder linker options, +- # but understands `-z linker_flag'. GCC discards it without `$wl', +- # but is careful enough not to reorder. +- # Supported since Solaris 2.6 (maybe 2.5.1?) +- if test "$GCC" = yes; then +- whole_archive_flag_spec_GCJ='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' +- else +- whole_archive_flag_spec_GCJ='-z allextract$convenience -z defaultextract' +- fi +- ;; +- esac +- link_all_deplibs_GCJ=yes +- ;; ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_dnet_stub_dnet_ntoa" >&5 ++echo "${ECHO_T}$ac_cv_lib_dnet_stub_dnet_ntoa" >&6; } ++if test $ac_cv_lib_dnet_stub_dnet_ntoa = yes; then ++ X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet_stub" ++fi + +- sunos4*) +- if test "x$host_vendor" = xsequent; then +- # Use $CC to link under sequent, because it throws in some extra .o +- # files that make .init and .fini sections work. +- archive_cmds_GCJ='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' +- else +- archive_cmds_GCJ='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' +- fi +- hardcode_libdir_flag_spec_GCJ='-L$libdir' +- hardcode_direct_GCJ=yes +- hardcode_minus_L_GCJ=yes +- hardcode_shlibpath_var_GCJ=no +- ;; ++ fi ++fi + +- sysv4) +- case $host_vendor in +- sni) +- archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- hardcode_direct_GCJ=yes # is this really true??? +- ;; +- siemens) +- ## LD is ld it makes a PLAMLIB +- ## CC just makes a GrossModule. +- archive_cmds_GCJ='$LD -G -o $lib $libobjs $deplibs $linker_flags' +- reload_cmds_GCJ='$CC -r -o $output$reload_objs' +- hardcode_direct_GCJ=no +- ;; +- motorola) +- archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- hardcode_direct_GCJ=no #Motorola manual says yes, but my tests say they lie +- ;; +- esac +- runpath_var='LD_RUN_PATH' +- hardcode_shlibpath_var_GCJ=no +- ;; ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++ LIBS="$ac_xsave_LIBS" + +- sysv4.3*) +- archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- hardcode_shlibpath_var_GCJ=no +- export_dynamic_flag_spec_GCJ='-Bexport' +- ;; ++ # msh@cis.ufl.edu says -lnsl (and -lsocket) are needed for his 386/AT, ++ # to get the SysV transport functions. ++ # Chad R. Larson says the Pyramis MIS-ES running DC/OSx (SVR4) ++ # needs -lnsl. ++ # The nsl library prevents programs from opening the X display ++ # on Irix 5.2, according to T.E. Dickey. ++ # The functions gethostbyname, getservbyname, and inet_addr are ++ # in -lbsd on LynxOS 3.0.1/i386, according to Lars Hecking. ++ { echo "$as_me:$LINENO: checking for gethostbyname" >&5 ++echo $ECHO_N "checking for gethostbyname... $ECHO_C" >&6; } ++if test "${ac_cv_func_gethostbyname+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++/* Define gethostbyname to an innocuous variant, in case declares gethostbyname. ++ For example, HP-UX 11i declares gettimeofday. */ ++#define gethostbyname innocuous_gethostbyname + +- sysv4*MP*) +- if test -d /usr/nec; then +- archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- hardcode_shlibpath_var_GCJ=no +- runpath_var=LD_RUN_PATH +- hardcode_runpath_var=yes +- ld_shlibs_GCJ=yes +- fi +- ;; ++/* System header to define __stub macros and hopefully few prototypes, ++ which can conflict with char gethostbyname (); below. ++ Prefer to if __STDC__ is defined, since ++ exists even on freestanding compilers. */ + +- sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) +- no_undefined_flag_GCJ='${wl}-z,text' +- archive_cmds_need_lc_GCJ=no +- hardcode_shlibpath_var_GCJ=no +- runpath_var='LD_RUN_PATH' ++#ifdef __STDC__ ++# include ++#else ++# include ++#endif + +- if test "$GCC" = yes; then +- archive_cmds_GCJ='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' +- archive_expsym_cmds_GCJ='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' +- else +- archive_cmds_GCJ='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' +- archive_expsym_cmds_GCJ='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' +- fi +- ;; ++#undef gethostbyname + +- sysv5* | sco3.2v5* | sco5v6*) +- # Note: We can NOT use -z defs as we might desire, because we do not +- # link with -lc, and that would cause any symbols used from libc to +- # always be unresolved, which means just about no library would +- # ever link correctly. If we're not using GNU ld we use -z text +- # though, which does catch some bad symbols but isn't as heavy-handed +- # as -z defs. +- no_undefined_flag_GCJ='${wl}-z,text' +- allow_undefined_flag_GCJ='${wl}-z,nodefs' +- archive_cmds_need_lc_GCJ=no +- hardcode_shlibpath_var_GCJ=no +- hardcode_libdir_flag_spec_GCJ='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' +- hardcode_libdir_separator_GCJ=':' +- link_all_deplibs_GCJ=yes +- export_dynamic_flag_spec_GCJ='${wl}-Bexport' +- runpath_var='LD_RUN_PATH' ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char gethostbyname (); ++/* The GNU C library defines this for functions which it implements ++ to always fail with ENOSYS. Some functions are actually named ++ something starting with __ and the normal name is an alias. */ ++#if defined __stub_gethostbyname || defined __stub___gethostbyname ++choke me ++#endif + +- if test "$GCC" = yes; then +- archive_cmds_GCJ='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' +- archive_expsym_cmds_GCJ='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' +- else +- archive_cmds_GCJ='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' +- archive_expsym_cmds_GCJ='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' +- fi +- ;; ++int ++main () ++{ ++return gethostbyname (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_func_gethostbyname=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 + +- uts4*) +- archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- hardcode_libdir_flag_spec_GCJ='-L$libdir' +- hardcode_shlibpath_var_GCJ=no +- ;; ++ ac_cv_func_gethostbyname=no ++fi + +- *) +- ld_shlibs_GCJ=no +- ;; +- esac +- fi ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_func_gethostbyname" >&5 ++echo "${ECHO_T}$ac_cv_func_gethostbyname" >&6; } + +-{ $as_echo "$as_me:$LINENO: result: $ld_shlibs_GCJ" >&5 +-$as_echo "$ld_shlibs_GCJ" >&6; } +-test "$ld_shlibs_GCJ" = no && can_build_shared=no ++ if test $ac_cv_func_gethostbyname = no; then ++ { echo "$as_me:$LINENO: checking for gethostbyname in -lnsl" >&5 ++echo $ECHO_N "checking for gethostbyname in -lnsl... $ECHO_C" >&6; } ++if test "${ac_cv_lib_nsl_gethostbyname+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-lnsl $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ + +-# +-# Do we need to explicitly link libc? +-# +-case "x$archive_cmds_need_lc_GCJ" in +-x|xyes) +- # Assume -lc should be added +- archive_cmds_need_lc_GCJ=yes ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char gethostbyname (); ++int ++main () ++{ ++return gethostbyname (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_nsl_gethostbyname=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 + +- if test "$enable_shared" = yes && test "$GCC" = yes; then +- case $archive_cmds_GCJ in +- *'~'*) +- # FIXME: we may have to deal with multi-command sequences. +- ;; +- '$CC '*) +- # Test whether the compiler implicitly links with -lc since on some +- # systems, -lgcc has to come before -lc. If gcc already passes -lc +- # to ld, don't add -lc before -lgcc. +- { $as_echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 +-$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; } +- $rm conftest* +- echo "$lt_simple_compile_test_code" > conftest.$ac_ext ++ ac_cv_lib_nsl_gethostbyname=no ++fi + +- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>&5 +- ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } 2>conftest.err; then +- soname=conftest +- lib=conftest +- libobjs=conftest.$ac_objext +- deplibs= +- wl=$lt_prog_compiler_wl_GCJ +- pic_flag=$lt_prog_compiler_pic_GCJ +- compiler_flags=-v +- linker_flags=-v +- verstring= +- output_objdir=. +- libname=conftest +- lt_save_allow_undefined_flag=$allow_undefined_flag_GCJ +- allow_undefined_flag_GCJ= +- if { (eval echo "$as_me:$LINENO: \"$archive_cmds_GCJ 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5 +- (eval $archive_cmds_GCJ 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5 +- ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } +- then +- archive_cmds_need_lc_GCJ=no +- else +- archive_cmds_need_lc_GCJ=yes +- fi +- allow_undefined_flag_GCJ=$lt_save_allow_undefined_flag +- else +- cat conftest.err 1>&5 +- fi +- $rm conftest* +- { $as_echo "$as_me:$LINENO: result: $archive_cmds_need_lc_GCJ" >&5 +-$as_echo "$archive_cmds_need_lc_GCJ" >&6; } +- ;; +- esac +- fi +- ;; ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_nsl_gethostbyname" >&5 ++echo "${ECHO_T}$ac_cv_lib_nsl_gethostbyname" >&6; } ++if test $ac_cv_lib_nsl_gethostbyname = yes; then ++ X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl" ++fi ++ ++ if test $ac_cv_lib_nsl_gethostbyname = no; then ++ { echo "$as_me:$LINENO: checking for gethostbyname in -lbsd" >&5 ++echo $ECHO_N "checking for gethostbyname in -lbsd... $ECHO_C" >&6; } ++if test "${ac_cv_lib_bsd_gethostbyname+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-lbsd $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char gethostbyname (); ++int ++main () ++{ ++return gethostbyname (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; + esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_bsd_gethostbyname=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 + +-{ $as_echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 +-$as_echo_n "checking dynamic linker characteristics... " >&6; } +-library_names_spec= +-libname_spec='lib$name' +-soname_spec= +-shrext_cmds=".so" +-postinstall_cmds= +-postuninstall_cmds= +-finish_cmds= +-finish_eval= +-shlibpath_var= +-shlibpath_overrides_runpath=unknown +-version_type=none +-dynamic_linker="$host_os ld.so" +-sys_lib_dlsearch_path_spec="/lib /usr/lib" ++ ac_cv_lib_bsd_gethostbyname=no ++fi + +-need_lib_prefix=unknown +-hardcode_into_libs=no ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_bsd_gethostbyname" >&5 ++echo "${ECHO_T}$ac_cv_lib_bsd_gethostbyname" >&6; } ++if test $ac_cv_lib_bsd_gethostbyname = yes; then ++ X_EXTRA_LIBS="$X_EXTRA_LIBS -lbsd" ++fi + +-# when you set need_version to no, make sure it does not cause -set_version +-# flags to be left without arguments +-need_version=unknown ++ fi ++ fi + +-case $host_os in +-aix3*) +- version_type=linux +- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' +- shlibpath_var=LIBPATH ++ # lieder@skyler.mavd.honeywell.com says without -lsocket, ++ # socket/setsockopt and other routines are undefined under SCO ODT ++ # 2.0. But -lsocket is broken on IRIX 5.2 (and is not necessary ++ # on later versions), says Simon Leinen: it contains gethostby* ++ # variants that don't use the name server (or something). -lsocket ++ # must be given before -lnsl if both are needed. We assume that ++ # if connect needs -lnsl, so does gethostbyname. ++ { echo "$as_me:$LINENO: checking for connect" >&5 ++echo $ECHO_N "checking for connect... $ECHO_C" >&6; } ++if test "${ac_cv_func_connect+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++/* Define connect to an innocuous variant, in case declares connect. ++ For example, HP-UX 11i declares gettimeofday. */ ++#define connect innocuous_connect + +- # AIX 3 has no versioning support, so we append a major version to the name. +- soname_spec='${libname}${release}${shared_ext}$major' +- ;; ++/* System header to define __stub macros and hopefully few prototypes, ++ which can conflict with char connect (); below. ++ Prefer to if __STDC__ is defined, since ++ exists even on freestanding compilers. */ + +-aix[4-9]*) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- hardcode_into_libs=yes +- if test "$host_cpu" = ia64; then +- # AIX 5 supports IA64 +- library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' +- shlibpath_var=LD_LIBRARY_PATH +- else +- # With GCC up to 2.95.x, collect2 would create an import file +- # for dependence libraries. The import file would start with +- # the line `#! .'. This would cause the generated library to +- # depend on `.', always an invalid library. This was fixed in +- # development snapshots of GCC prior to 3.0. +- case $host_os in +- aix4 | aix4.[01] | aix4.[01].*) +- if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' +- echo ' yes ' +- echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then +- : +- else +- can_build_shared=no +- fi +- ;; +- esac +- # AIX (on Power*) has no versioning support, so currently we can not hardcode correct +- # soname into executable. Probably we can add versioning support to +- # collect2, so additional links can be useful in future. +- if test "$aix_use_runtimelinking" = yes; then +- # If using run time linking (on AIX 4.2 or later) use lib.so +- # instead of lib.a to let people know that these are not +- # typical AIX shared libraries. +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- else +- # We preserve .a as extension for shared libraries through AIX4.2 +- # and later when we are not doing run time linking. +- library_names_spec='${libname}${release}.a $libname.a' +- soname_spec='${libname}${release}${shared_ext}$major' +- fi +- shlibpath_var=LIBPATH +- fi +- ;; ++#ifdef __STDC__ ++# include ++#else ++# include ++#endif + +-amigaos*) +- library_names_spec='$libname.ixlibrary $libname.a' +- # Create ${libname}_ixlibrary.a entries in /sys/libs. +- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' +- ;; ++#undef connect + +-beos*) +- library_names_spec='${libname}${shared_ext}' +- dynamic_linker="$host_os ld.so" +- shlibpath_var=LIBRARY_PATH +- ;; ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char connect (); ++/* The GNU C library defines this for functions which it implements ++ to always fail with ENOSYS. Some functions are actually named ++ something starting with __ and the normal name is an alias. */ ++#if defined __stub_connect || defined __stub___connect ++choke me ++#endif + +-bsdi[45]*) +- version_type=linux +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' +- shlibpath_var=LD_LIBRARY_PATH +- sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" +- sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" +- # the default ld.so.conf also contains /usr/contrib/lib and +- # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow +- # libtool to hard-code these into programs +- ;; ++int ++main () ++{ ++return connect (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_func_connect=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 + +-cygwin* | mingw* | pw32*) +- version_type=windows +- shrext_cmds=".dll" +- need_version=no +- need_lib_prefix=no ++ ac_cv_func_connect=no ++fi + +- case $GCC,$host_os in +- yes,cygwin* | yes,mingw* | yes,pw32*) +- library_names_spec='$libname.dll.a' +- # DLL is installed to $(libdir)/../bin by postinstall_cmds +- postinstall_cmds='base_file=`basename \${file}`~ +- dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ +- dldir=$destdir/`dirname \$dlpath`~ +- test -d \$dldir || mkdir -p \$dldir~ +- $install_prog $dir/$dlname \$dldir/$dlname~ +- chmod a+x \$dldir/$dlname' +- postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ +- dlpath=$dir/\$dldll~ +- $rm \$dlpath' +- shlibpath_overrides_runpath=yes ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_func_connect" >&5 ++echo "${ECHO_T}$ac_cv_func_connect" >&6; } + +- case $host_os in +- cygwin*) +- # Cygwin DLLs use 'cyg' prefix rather than 'lib' +- soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' +- sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" +- ;; +- mingw*) +- # MinGW DLLs use traditional 'lib' prefix +- soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' +- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` +- if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then +- # It is most probably a Windows format PATH printed by +- # mingw gcc, but we are running on Cygwin. Gcc prints its search +- # path with ; separators, and with drive letters. We can handle the +- # drive letters (cygwin fileutils understands them), so leave them, +- # especially as we might pass files found there to a mingw objdump, +- # which wouldn't understand a cygwinified path. Ahh. +- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` +- else +- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` +- fi +- ;; +- pw32*) +- # pw32 DLLs use 'pw' prefix rather than 'lib' +- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' +- ;; +- esac +- ;; ++ if test $ac_cv_func_connect = no; then ++ { echo "$as_me:$LINENO: checking for connect in -lsocket" >&5 ++echo $ECHO_N "checking for connect in -lsocket... $ECHO_C" >&6; } ++if test "${ac_cv_lib_socket_connect+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-lsocket $X_EXTRA_LIBS $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ + +- *) +- library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' +- ;; +- esac +- dynamic_linker='Win32 ld.exe' +- # FIXME: first we should search . and the directory the executable is in +- shlibpath_var=PATH +- ;; ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char connect (); ++int ++main () ++{ ++return connect (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_socket_connect=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 + +-darwin* | rhapsody*) +- dynamic_linker="$host_os dyld" +- version_type=darwin +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext' +- soname_spec='${libname}${release}${major}$shared_ext' +- shlibpath_overrides_runpath=yes +- shlibpath_var=DYLD_LIBRARY_PATH +- shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' ++ ac_cv_lib_socket_connect=no ++fi + +- sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' +- ;; ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_socket_connect" >&5 ++echo "${ECHO_T}$ac_cv_lib_socket_connect" >&6; } ++if test $ac_cv_lib_socket_connect = yes; then ++ X_EXTRA_LIBS="-lsocket $X_EXTRA_LIBS" ++fi + +-dgux*) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- ;; ++ fi + +-freebsd1*) +- dynamic_linker=no +- ;; ++ # Guillermo Gomez says -lposix is necessary on A/UX. ++ { echo "$as_me:$LINENO: checking for remove" >&5 ++echo $ECHO_N "checking for remove... $ECHO_C" >&6; } ++if test "${ac_cv_func_remove+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++/* Define remove to an innocuous variant, in case declares remove. ++ For example, HP-UX 11i declares gettimeofday. */ ++#define remove innocuous_remove + +-freebsd* | dragonfly*) +- # DragonFly does not have aout. When/if they implement a new +- # versioning mechanism, adjust this. +- if test -x /usr/bin/objformat; then +- objformat=`/usr/bin/objformat` +- else +- case $host_os in +- freebsd[123]*) objformat=aout ;; +- *) objformat=elf ;; +- esac +- fi +- version_type=freebsd-$objformat +- case $version_type in +- freebsd-elf*) +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' +- need_version=no +- need_lib_prefix=no +- ;; +- freebsd-*) +- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' +- need_version=yes +- ;; +- esac +- shlibpath_var=LD_LIBRARY_PATH +- case $host_os in +- freebsd2*) +- shlibpath_overrides_runpath=yes +- ;; +- freebsd3.[01]* | freebsdelf3.[01]*) +- shlibpath_overrides_runpath=yes +- hardcode_into_libs=yes +- ;; +- freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ +- freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) +- shlibpath_overrides_runpath=no +- hardcode_into_libs=yes +- ;; +- *) # from 4.6 on, and DragonFly +- shlibpath_overrides_runpath=yes +- hardcode_into_libs=yes +- ;; +- esac +- ;; +- +-gnu*) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- hardcode_into_libs=yes +- ;; +- +-hpux9* | hpux10* | hpux11*) +- # Give a soname corresponding to the major version so that dld.sl refuses to +- # link against other versions. +- version_type=sunos +- need_lib_prefix=no +- need_version=no +- case $host_cpu in +- ia64*) +- shrext_cmds='.so' +- hardcode_into_libs=yes +- dynamic_linker="$host_os dld.so" +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- if test "X$HPUX_IA64_MODE" = X32; then +- sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" +- else +- sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" +- fi +- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec +- ;; +- hppa*64*) +- shrext_cmds='.sl' +- hardcode_into_libs=yes +- dynamic_linker="$host_os dld.sl" +- shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH +- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" +- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec +- ;; +- *) +- shrext_cmds='.sl' +- dynamic_linker="$host_os dld.sl" +- shlibpath_var=SHLIB_PATH +- shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- ;; +- esac +- # HP-UX runs *really* slowly unless shared libraries are mode 555. +- postinstall_cmds='chmod 555 $lib' +- ;; +- +-interix[3-9]*) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=no +- hardcode_into_libs=yes +- ;; +- +-irix5* | irix6* | nonstopux*) +- case $host_os in +- nonstopux*) version_type=nonstopux ;; +- *) +- if test "$lt_cv_prog_gnu_ld" = yes; then +- version_type=linux +- else +- version_type=irix +- fi ;; +- esac +- need_lib_prefix=no +- need_version=no +- soname_spec='${libname}${release}${shared_ext}$major' +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' +- case $host_os in +- irix5* | nonstopux*) +- libsuff= shlibsuff= +- ;; +- *) +- case $LD in # libtool.m4 will add one of these switches to LD +- *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") +- libsuff= shlibsuff= libmagic=32-bit;; +- *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") +- libsuff=32 shlibsuff=N32 libmagic=N32;; +- *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") +- libsuff=64 shlibsuff=64 libmagic=64-bit;; +- *) libsuff= shlibsuff= libmagic=never-match;; +- esac +- ;; +- esac +- shlibpath_var=LD_LIBRARY${shlibsuff}_PATH +- shlibpath_overrides_runpath=no +- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" +- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" +- hardcode_into_libs=yes +- ;; +- +-# No shared lib support for Linux oldld, aout, or coff. +-linux*oldld* | linux*aout* | linux*coff*) +- dynamic_linker=no +- ;; +- +-# This must be Linux ELF. +-linux* | k*bsd*-gnu) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=no +- # This implies no fast_install, which is unacceptable. +- # Some rework will be needed to allow for fast_install +- # before this can be enabled. +- hardcode_into_libs=yes +- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" +- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" +- +- # Append ld.so.conf contents to the search path +- if test -f /etc/ld.so.conf; then +- lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` +- sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra" +- fi +- +- # We used to test for /lib/ld.so.1 and disable shared libraries on +- # powerpc, because MkLinux only supported shared libraries with the +- # GNU dynamic linker. Since this was broken with cross compilers, +- # most powerpc-linux boxes support dynamic linking these days and +- # people can always --disable-shared, the test was removed, and we +- # assume the GNU/Linux dynamic linker is in use. +- dynamic_linker='GNU/Linux ld.so' +- ;; +- +-netbsd*) +- version_type=sunos +- need_lib_prefix=no +- need_version=no +- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' +- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' +- dynamic_linker='NetBSD (a.out) ld.so' +- else +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- dynamic_linker='NetBSD ld.elf_so' +- fi +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=yes +- hardcode_into_libs=yes +- ;; +- +-newsos6) +- version_type=linux +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=yes +- ;; +- +-nto-qnx*) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=yes +- ;; +- +-openbsd*) +- version_type=sunos +- sys_lib_dlsearch_path_spec="/usr/lib" +- need_lib_prefix=no +- # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. +- case $host_os in +- openbsd3.3 | openbsd3.3.*) need_version=yes ;; +- *) need_version=no ;; +- esac +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' +- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' +- shlibpath_var=LD_LIBRARY_PATH +- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then +- case $host_os in +- openbsd2.[89] | openbsd2.[89].*) +- shlibpath_overrides_runpath=no +- ;; +- *) +- shlibpath_overrides_runpath=yes +- ;; +- esac +- else +- shlibpath_overrides_runpath=yes +- fi +- ;; +- +-os2*) +- libname_spec='$name' +- shrext_cmds=".dll" +- need_lib_prefix=no +- library_names_spec='$libname${shared_ext} $libname.a' +- dynamic_linker='OS/2 ld.exe' +- shlibpath_var=LIBPATH +- ;; +- +-osf3* | osf4* | osf5*) +- version_type=osf +- need_lib_prefix=no +- need_version=no +- soname_spec='${libname}${release}${shared_ext}$major' +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- shlibpath_var=LD_LIBRARY_PATH +- sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" +- sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" +- ;; +- +-rdos*) +- dynamic_linker=no +- ;; +- +-solaris*) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=yes +- hardcode_into_libs=yes +- # ldd complains unless libraries are executable +- postinstall_cmds='chmod +x $lib' +- ;; +- +-sunos4*) +- version_type=sunos +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' +- finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=yes +- if test "$with_gnu_ld" = yes; then +- need_lib_prefix=no +- fi +- need_version=yes +- ;; +- +-sysv4 | sysv4.3*) +- version_type=linux +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- case $host_vendor in +- sni) +- shlibpath_overrides_runpath=no +- need_lib_prefix=no +- export_dynamic_flag_spec='${wl}-Blargedynsym' +- runpath_var=LD_RUN_PATH +- ;; +- siemens) +- need_lib_prefix=no +- ;; +- motorola) +- need_lib_prefix=no +- need_version=no +- shlibpath_overrides_runpath=no +- sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' +- ;; +- esac +- ;; +- +-sysv4*MP*) +- if test -d /usr/nec ;then +- version_type=linux +- library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' +- soname_spec='$libname${shared_ext}.$major' +- shlibpath_var=LD_LIBRARY_PATH +- fi +- ;; +- +-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) +- version_type=freebsd-elf +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- hardcode_into_libs=yes +- if test "$with_gnu_ld" = yes; then +- sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' +- shlibpath_overrides_runpath=no +- else +- sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' +- shlibpath_overrides_runpath=yes +- case $host_os in +- sco3.2v5*) +- sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" +- ;; +- esac +- fi +- sys_lib_dlsearch_path_spec='/usr/lib' +- ;; +- +-uts4*) +- version_type=linux +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- ;; +- +-*) +- dynamic_linker=no +- ;; +-esac +-{ $as_echo "$as_me:$LINENO: result: $dynamic_linker" >&5 +-$as_echo "$dynamic_linker" >&6; } +-test "$dynamic_linker" = no && can_build_shared=no +- +-if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then +- $as_echo_n "(cached) " >&6 +-else +- lt_cv_sys_lib_search_path_spec="$sys_lib_search_path_spec" +-fi +- +-sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" +-if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then +- $as_echo_n "(cached) " >&6 +-else +- lt_cv_sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec" +-fi +- +-sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" +- +-variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +-if test "$GCC" = yes; then +- variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" +-fi +- +-{ $as_echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 +-$as_echo_n "checking how to hardcode library paths into programs... " >&6; } +-hardcode_action_GCJ= +-if test -n "$hardcode_libdir_flag_spec_GCJ" || \ +- test -n "$runpath_var_GCJ" || \ +- test "X$hardcode_automatic_GCJ" = "Xyes" ; then +- +- # We can hardcode non-existant directories. +- if test "$hardcode_direct_GCJ" != no && +- # If the only mechanism to avoid hardcoding is shlibpath_var, we +- # have to relink, otherwise we might link with an installed library +- # when we should be linking with a yet-to-be-installed one +- ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, GCJ)" != no && +- test "$hardcode_minus_L_GCJ" != no; then +- # Linking always hardcodes the temporary library directory. +- hardcode_action_GCJ=relink +- else +- # We can link without hardcoding, and we can hardcode nonexisting dirs. +- hardcode_action_GCJ=immediate +- fi +-else +- # We cannot hardcode anything, or else we can only hardcode existing +- # directories. +- hardcode_action_GCJ=unsupported +-fi +-{ $as_echo "$as_me:$LINENO: result: $hardcode_action_GCJ" >&5 +-$as_echo "$hardcode_action_GCJ" >&6; } +- +-if test "$hardcode_action_GCJ" = relink; then +- # Fast installation is not supported +- enable_fast_install=no +-elif test "$shlibpath_overrides_runpath" = yes || +- test "$enable_shared" = no; then +- # Fast installation is not necessary +- enable_fast_install=needless +-fi +- +- +-# The else clause should only fire when bootstrapping the +-# libtool distribution, otherwise you forgot to ship ltmain.sh +-# with your package, and you will get complaints that there are +-# no rules to generate ltmain.sh. +-if test -f "$ltmain"; then +- # See if we are running on zsh, and set the options which allow our commands through +- # without removal of \ escapes. +- if test -n "${ZSH_VERSION+set}" ; then +- setopt NO_GLOB_SUBST +- fi +- # Now quote all the things that may contain metacharacters while being +- # careful not to overquote the AC_SUBSTed values. We take copies of the +- # variables and quote the copies for generation of the libtool script. +- for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \ +- SED SHELL STRIP \ +- libname_spec library_names_spec soname_spec extract_expsyms_cmds \ +- old_striplib striplib file_magic_cmd finish_cmds finish_eval \ +- deplibs_check_method reload_flag reload_cmds need_locks \ +- lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ +- lt_cv_sys_global_symbol_to_c_name_address \ +- sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ +- old_postinstall_cmds old_postuninstall_cmds \ +- compiler_GCJ \ +- CC_GCJ \ +- LD_GCJ \ +- lt_prog_compiler_wl_GCJ \ +- lt_prog_compiler_pic_GCJ \ +- lt_prog_compiler_static_GCJ \ +- lt_prog_compiler_no_builtin_flag_GCJ \ +- export_dynamic_flag_spec_GCJ \ +- thread_safe_flag_spec_GCJ \ +- whole_archive_flag_spec_GCJ \ +- enable_shared_with_static_runtimes_GCJ \ +- old_archive_cmds_GCJ \ +- old_archive_from_new_cmds_GCJ \ +- predep_objects_GCJ \ +- postdep_objects_GCJ \ +- predeps_GCJ \ +- postdeps_GCJ \ +- compiler_lib_search_path_GCJ \ +- compiler_lib_search_dirs_GCJ \ +- archive_cmds_GCJ \ +- archive_expsym_cmds_GCJ \ +- postinstall_cmds_GCJ \ +- postuninstall_cmds_GCJ \ +- old_archive_from_expsyms_cmds_GCJ \ +- allow_undefined_flag_GCJ \ +- no_undefined_flag_GCJ \ +- export_symbols_cmds_GCJ \ +- hardcode_libdir_flag_spec_GCJ \ +- hardcode_libdir_flag_spec_ld_GCJ \ +- hardcode_libdir_separator_GCJ \ +- hardcode_automatic_GCJ \ +- module_cmds_GCJ \ +- module_expsym_cmds_GCJ \ +- lt_cv_prog_compiler_c_o_GCJ \ +- fix_srcfile_path_GCJ \ +- exclude_expsyms_GCJ \ +- include_expsyms_GCJ; do +- +- case $var in +- old_archive_cmds_GCJ | \ +- old_archive_from_new_cmds_GCJ | \ +- archive_cmds_GCJ | \ +- archive_expsym_cmds_GCJ | \ +- module_cmds_GCJ | \ +- module_expsym_cmds_GCJ | \ +- old_archive_from_expsyms_cmds_GCJ | \ +- export_symbols_cmds_GCJ | \ +- extract_expsyms_cmds | reload_cmds | finish_cmds | \ +- postinstall_cmds | postuninstall_cmds | \ +- old_postinstall_cmds | old_postuninstall_cmds | \ +- sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) +- # Double-quote double-evaled strings. +- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" +- ;; +- *) +- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" +- ;; +- esac +- done +- +- case $lt_echo in +- *'\$0 --fallback-echo"') +- lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` +- ;; +- esac +- +-cfgfile="$ofile" +- +- cat <<__EOF__ >> "$cfgfile" +-# ### BEGIN LIBTOOL TAG CONFIG: $tagname +- +-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: +- +-# Shell to use when invoking shell scripts. +-SHELL=$lt_SHELL +- +-# Whether or not to build shared libraries. +-build_libtool_libs=$enable_shared +- +-# Whether or not to build static libraries. +-build_old_libs=$enable_static +- +-# Whether or not to add -lc for building shared libraries. +-build_libtool_need_lc=$archive_cmds_need_lc_GCJ +- +-# Whether or not to disallow shared libs when runtime libs are static +-allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_GCJ +- +-# Whether or not to optimize for fast installation. +-fast_install=$enable_fast_install +- +-# The host system. +-host_alias=$host_alias +-host=$host +-host_os=$host_os +- +-# The build system. +-build_alias=$build_alias +-build=$build +-build_os=$build_os +- +-# An echo program that does not interpret backslashes. +-echo=$lt_echo +- +-# The archiver. +-AR=$lt_AR +-AR_FLAGS=$lt_AR_FLAGS +- +-# A C compiler. +-LTCC=$lt_LTCC +- +-# LTCC compiler flags. +-LTCFLAGS=$lt_LTCFLAGS +- +-# A language-specific compiler. +-CC=$lt_compiler_GCJ +- +-# Is the compiler the GNU C compiler? +-with_gcc=$GCC_GCJ +- +-# An ERE matcher. +-EGREP=$lt_EGREP +- +-# The linker used to build libraries. +-LD=$lt_LD_GCJ +- +-# Whether we need hard or soft links. +-LN_S=$lt_LN_S +- +-# A BSD-compatible nm program. +-NM=$lt_NM +- +-# A symbol stripping program +-STRIP=$lt_STRIP +- +-# Used to examine libraries when file_magic_cmd begins "file" +-MAGIC_CMD=$MAGIC_CMD +- +-# Used on cygwin: DLL creation program. +-DLLTOOL="$DLLTOOL" +- +-# Used on cygwin: object dumper. +-OBJDUMP="$OBJDUMP" +- +-# Used on cygwin: assembler. +-AS="$AS" +- +-# The name of the directory that contains temporary libtool files. +-objdir=$objdir +- +-# How to create reloadable object files. +-reload_flag=$lt_reload_flag +-reload_cmds=$lt_reload_cmds +- +-# How to pass a linker flag through the compiler. +-wl=$lt_lt_prog_compiler_wl_GCJ +- +-# Object file suffix (normally "o"). +-objext="$ac_objext" +- +-# Old archive suffix (normally "a"). +-libext="$libext" +- +-# Shared library suffix (normally ".so"). +-shrext_cmds='$shrext_cmds' +- +-# Executable file suffix (normally ""). +-exeext="$exeext" +- +-# Additional compiler flags for building library objects. +-pic_flag=$lt_lt_prog_compiler_pic_GCJ +-pic_mode=$pic_mode +- +-# What is the maximum length of a command? +-max_cmd_len=$lt_cv_sys_max_cmd_len +- +-# Does compiler simultaneously support -c and -o options? +-compiler_c_o=$lt_lt_cv_prog_compiler_c_o_GCJ +- +-# Must we lock files when doing compilation? +-need_locks=$lt_need_locks +- +-# Do we need the lib prefix for modules? +-need_lib_prefix=$need_lib_prefix +- +-# Do we need a version for libraries? +-need_version=$need_version +- +-# Whether dlopen is supported. +-dlopen_support=$enable_dlopen +- +-# Whether dlopen of programs is supported. +-dlopen_self=$enable_dlopen_self +- +-# Whether dlopen of statically linked programs is supported. +-dlopen_self_static=$enable_dlopen_self_static +- +-# Compiler flag to prevent dynamic linking. +-link_static_flag=$lt_lt_prog_compiler_static_GCJ +- +-# Compiler flag to turn off builtin functions. +-no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_GCJ +- +-# Compiler flag to allow reflexive dlopens. +-export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_GCJ +- +-# Compiler flag to generate shared objects directly from archives. +-whole_archive_flag_spec=$lt_whole_archive_flag_spec_GCJ +- +-# Compiler flag to generate thread-safe objects. +-thread_safe_flag_spec=$lt_thread_safe_flag_spec_GCJ +- +-# Library versioning type. +-version_type=$version_type +- +-# Format of library name prefix. +-libname_spec=$lt_libname_spec +- +-# List of archive names. First name is the real one, the rest are links. +-# The last name is the one that the linker finds with -lNAME. +-library_names_spec=$lt_library_names_spec +- +-# The coded name of the library, if different from the real name. +-soname_spec=$lt_soname_spec +- +-# Commands used to build and install an old-style archive. +-RANLIB=$lt_RANLIB +-old_archive_cmds=$lt_old_archive_cmds_GCJ +-old_postinstall_cmds=$lt_old_postinstall_cmds +-old_postuninstall_cmds=$lt_old_postuninstall_cmds +- +-# Create an old-style archive from a shared archive. +-old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_GCJ +- +-# Create a temporary old-style archive to link instead of a shared archive. +-old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_GCJ +- +-# Commands used to build and install a shared archive. +-archive_cmds=$lt_archive_cmds_GCJ +-archive_expsym_cmds=$lt_archive_expsym_cmds_GCJ +-postinstall_cmds=$lt_postinstall_cmds +-postuninstall_cmds=$lt_postuninstall_cmds +- +-# Commands used to build a loadable module (assumed same as above if empty) +-module_cmds=$lt_module_cmds_GCJ +-module_expsym_cmds=$lt_module_expsym_cmds_GCJ +- +-# Commands to strip libraries. +-old_striplib=$lt_old_striplib +-striplib=$lt_striplib +- +-# Dependencies to place before the objects being linked to create a +-# shared library. +-predep_objects=$lt_predep_objects_GCJ +- +-# Dependencies to place after the objects being linked to create a +-# shared library. +-postdep_objects=$lt_postdep_objects_GCJ +- +-# Dependencies to place before the objects being linked to create a +-# shared library. +-predeps=$lt_predeps_GCJ +- +-# Dependencies to place after the objects being linked to create a +-# shared library. +-postdeps=$lt_postdeps_GCJ +- +-# The directories searched by this compiler when creating a shared +-# library +-compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_GCJ +- +-# The library search path used internally by the compiler when linking +-# a shared library. +-compiler_lib_search_path=$lt_compiler_lib_search_path_GCJ +- +-# Method to check whether dependent libraries are shared objects. +-deplibs_check_method=$lt_deplibs_check_method +- +-# Command to use when deplibs_check_method == file_magic. +-file_magic_cmd=$lt_file_magic_cmd +- +-# Flag that allows shared libraries with undefined symbols to be built. +-allow_undefined_flag=$lt_allow_undefined_flag_GCJ +- +-# Flag that forces no undefined symbols. +-no_undefined_flag=$lt_no_undefined_flag_GCJ +- +-# Commands used to finish a libtool library installation in a directory. +-finish_cmds=$lt_finish_cmds +- +-# Same as above, but a single script fragment to be evaled but not shown. +-finish_eval=$lt_finish_eval +- +-# Take the output of nm and produce a listing of raw symbols and C names. +-global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe +- +-# Transform the output of nm in a proper C declaration +-global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl +- +-# Transform the output of nm in a C name address pair +-global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address +- +-# This is the shared library runtime path variable. +-runpath_var=$runpath_var +- +-# This is the shared library path variable. +-shlibpath_var=$shlibpath_var +- +-# Is shlibpath searched before the hard-coded library search path? +-shlibpath_overrides_runpath=$shlibpath_overrides_runpath +- +-# How to hardcode a shared library path into an executable. +-hardcode_action=$hardcode_action_GCJ +- +-# Whether we should hardcode library paths into libraries. +-hardcode_into_libs=$hardcode_into_libs +- +-# Flag to hardcode \$libdir into a binary during linking. +-# This must work even if \$libdir does not exist. +-hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_GCJ +- +-# If ld is used when linking, flag to hardcode \$libdir into +-# a binary during linking. This must work even if \$libdir does +-# not exist. +-hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_GCJ +- +-# Whether we need a single -rpath flag with a separated argument. +-hardcode_libdir_separator=$lt_hardcode_libdir_separator_GCJ +- +-# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the +-# resulting binary. +-hardcode_direct=$hardcode_direct_GCJ +- +-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the +-# resulting binary. +-hardcode_minus_L=$hardcode_minus_L_GCJ +- +-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into +-# the resulting binary. +-hardcode_shlibpath_var=$hardcode_shlibpath_var_GCJ +- +-# Set to yes if building a shared library automatically hardcodes DIR into the library +-# and all subsequent libraries and executables linked against it. +-hardcode_automatic=$hardcode_automatic_GCJ +- +-# Variables whose values should be saved in libtool wrapper scripts and +-# restored at relink time. +-variables_saved_for_relink="$variables_saved_for_relink" +- +-# Whether libtool must link a program against all its dependency libraries. +-link_all_deplibs=$link_all_deplibs_GCJ +- +-# Compile-time system search path for libraries +-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec +- +-# Run-time system search path for libraries +-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec +- +-# Fix the shell variable \$srcfile for the compiler. +-fix_srcfile_path=$lt_fix_srcfile_path +- +-# Set to yes if exported symbols are required. +-always_export_symbols=$always_export_symbols_GCJ +- +-# The commands to list exported symbols. +-export_symbols_cmds=$lt_export_symbols_cmds_GCJ +- +-# The commands to extract the exported symbol list from a shared archive. +-extract_expsyms_cmds=$lt_extract_expsyms_cmds +- +-# Symbols that should not be listed in the preloaded symbols. +-exclude_expsyms=$lt_exclude_expsyms_GCJ +- +-# Symbols that must always be exported. +-include_expsyms=$lt_include_expsyms_GCJ +- +-# ### END LIBTOOL TAG CONFIG: $tagname +- +-__EOF__ +- +- +-else +- # If there is no Makefile yet, we rely on a make rule to execute +- # `config.status --recheck' to rerun these tests and create the +- # libtool script then. +- ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` +- if test -f "$ltmain_in"; then +- test -f Makefile && make "$ltmain" +- fi +-fi +- +- +-ac_ext=c +-ac_cpp='$CPP $CPPFLAGS' +-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +-ac_compiler_gnu=$ac_cv_c_compiler_gnu +- +-CC="$lt_save_CC" +- +- else +- tagname="" +- fi +- ;; +- +- RC) +- +- +-# Source file extension for RC test sources. +-ac_ext=rc +- +-# Object file extension for compiled RC test sources. +-objext=o +-objext_RC=$objext +- +-# Code to be used in simple compile tests +-lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }' +- +-# Code to be used in simple link tests +-lt_simple_link_test_code="$lt_simple_compile_test_code" +- +-# ltmain only uses $CC for tagged configurations so make sure $CC is set. +- +-# If no C compiler was specified, use CC. +-LTCC=${LTCC-"$CC"} +- +-# If no C compiler flags were specified, use CFLAGS. +-LTCFLAGS=${LTCFLAGS-"$CFLAGS"} +- +-# Allow CC to be a program name with arguments. +-compiler=$CC +- +- +-# save warnings/boilerplate of simple test code +-ac_outfile=conftest.$ac_objext +-echo "$lt_simple_compile_test_code" >conftest.$ac_ext +-eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +-_lt_compiler_boilerplate=`cat conftest.err` +-$rm conftest* +- +-ac_outfile=conftest.$ac_objext +-echo "$lt_simple_link_test_code" >conftest.$ac_ext +-eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +-_lt_linker_boilerplate=`cat conftest.err` +-$rm -r conftest* +- +- +-# Allow CC to be a program name with arguments. +-lt_save_CC="$CC" +-CC=${RC-"windres"} +-compiler=$CC +-compiler_RC=$CC +-for cc_temp in $compiler""; do +- case $cc_temp in +- compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; +- distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; +- \-*) ;; +- *) break;; +- esac +-done +-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` +- +-lt_cv_prog_compiler_c_o_RC=yes +- +-# The else clause should only fire when bootstrapping the +-# libtool distribution, otherwise you forgot to ship ltmain.sh +-# with your package, and you will get complaints that there are +-# no rules to generate ltmain.sh. +-if test -f "$ltmain"; then +- # See if we are running on zsh, and set the options which allow our commands through +- # without removal of \ escapes. +- if test -n "${ZSH_VERSION+set}" ; then +- setopt NO_GLOB_SUBST +- fi +- # Now quote all the things that may contain metacharacters while being +- # careful not to overquote the AC_SUBSTed values. We take copies of the +- # variables and quote the copies for generation of the libtool script. +- for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \ +- SED SHELL STRIP \ +- libname_spec library_names_spec soname_spec extract_expsyms_cmds \ +- old_striplib striplib file_magic_cmd finish_cmds finish_eval \ +- deplibs_check_method reload_flag reload_cmds need_locks \ +- lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ +- lt_cv_sys_global_symbol_to_c_name_address \ +- sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ +- old_postinstall_cmds old_postuninstall_cmds \ +- compiler_RC \ +- CC_RC \ +- LD_RC \ +- lt_prog_compiler_wl_RC \ +- lt_prog_compiler_pic_RC \ +- lt_prog_compiler_static_RC \ +- lt_prog_compiler_no_builtin_flag_RC \ +- export_dynamic_flag_spec_RC \ +- thread_safe_flag_spec_RC \ +- whole_archive_flag_spec_RC \ +- enable_shared_with_static_runtimes_RC \ +- old_archive_cmds_RC \ +- old_archive_from_new_cmds_RC \ +- predep_objects_RC \ +- postdep_objects_RC \ +- predeps_RC \ +- postdeps_RC \ +- compiler_lib_search_path_RC \ +- compiler_lib_search_dirs_RC \ +- archive_cmds_RC \ +- archive_expsym_cmds_RC \ +- postinstall_cmds_RC \ +- postuninstall_cmds_RC \ +- old_archive_from_expsyms_cmds_RC \ +- allow_undefined_flag_RC \ +- no_undefined_flag_RC \ +- export_symbols_cmds_RC \ +- hardcode_libdir_flag_spec_RC \ +- hardcode_libdir_flag_spec_ld_RC \ +- hardcode_libdir_separator_RC \ +- hardcode_automatic_RC \ +- module_cmds_RC \ +- module_expsym_cmds_RC \ +- lt_cv_prog_compiler_c_o_RC \ +- fix_srcfile_path_RC \ +- exclude_expsyms_RC \ +- include_expsyms_RC; do +- +- case $var in +- old_archive_cmds_RC | \ +- old_archive_from_new_cmds_RC | \ +- archive_cmds_RC | \ +- archive_expsym_cmds_RC | \ +- module_cmds_RC | \ +- module_expsym_cmds_RC | \ +- old_archive_from_expsyms_cmds_RC | \ +- export_symbols_cmds_RC | \ +- extract_expsyms_cmds | reload_cmds | finish_cmds | \ +- postinstall_cmds | postuninstall_cmds | \ +- old_postinstall_cmds | old_postuninstall_cmds | \ +- sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) +- # Double-quote double-evaled strings. +- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" +- ;; +- *) +- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" +- ;; +- esac +- done +- +- case $lt_echo in +- *'\$0 --fallback-echo"') +- lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` +- ;; +- esac +- +-cfgfile="$ofile" +- +- cat <<__EOF__ >> "$cfgfile" +-# ### BEGIN LIBTOOL TAG CONFIG: $tagname +- +-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: +- +-# Shell to use when invoking shell scripts. +-SHELL=$lt_SHELL +- +-# Whether or not to build shared libraries. +-build_libtool_libs=$enable_shared +- +-# Whether or not to build static libraries. +-build_old_libs=$enable_static +- +-# Whether or not to add -lc for building shared libraries. +-build_libtool_need_lc=$archive_cmds_need_lc_RC +- +-# Whether or not to disallow shared libs when runtime libs are static +-allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_RC +- +-# Whether or not to optimize for fast installation. +-fast_install=$enable_fast_install +- +-# The host system. +-host_alias=$host_alias +-host=$host +-host_os=$host_os +- +-# The build system. +-build_alias=$build_alias +-build=$build +-build_os=$build_os +- +-# An echo program that does not interpret backslashes. +-echo=$lt_echo +- +-# The archiver. +-AR=$lt_AR +-AR_FLAGS=$lt_AR_FLAGS +- +-# A C compiler. +-LTCC=$lt_LTCC +- +-# LTCC compiler flags. +-LTCFLAGS=$lt_LTCFLAGS +- +-# A language-specific compiler. +-CC=$lt_compiler_RC +- +-# Is the compiler the GNU C compiler? +-with_gcc=$GCC_RC +- +-# An ERE matcher. +-EGREP=$lt_EGREP +- +-# The linker used to build libraries. +-LD=$lt_LD_RC +- +-# Whether we need hard or soft links. +-LN_S=$lt_LN_S +- +-# A BSD-compatible nm program. +-NM=$lt_NM +- +-# A symbol stripping program +-STRIP=$lt_STRIP +- +-# Used to examine libraries when file_magic_cmd begins "file" +-MAGIC_CMD=$MAGIC_CMD +- +-# Used on cygwin: DLL creation program. +-DLLTOOL="$DLLTOOL" +- +-# Used on cygwin: object dumper. +-OBJDUMP="$OBJDUMP" +- +-# Used on cygwin: assembler. +-AS="$AS" +- +-# The name of the directory that contains temporary libtool files. +-objdir=$objdir +- +-# How to create reloadable object files. +-reload_flag=$lt_reload_flag +-reload_cmds=$lt_reload_cmds +- +-# How to pass a linker flag through the compiler. +-wl=$lt_lt_prog_compiler_wl_RC +- +-# Object file suffix (normally "o"). +-objext="$ac_objext" +- +-# Old archive suffix (normally "a"). +-libext="$libext" +- +-# Shared library suffix (normally ".so"). +-shrext_cmds='$shrext_cmds' +- +-# Executable file suffix (normally ""). +-exeext="$exeext" +- +-# Additional compiler flags for building library objects. +-pic_flag=$lt_lt_prog_compiler_pic_RC +-pic_mode=$pic_mode +- +-# What is the maximum length of a command? +-max_cmd_len=$lt_cv_sys_max_cmd_len +- +-# Does compiler simultaneously support -c and -o options? +-compiler_c_o=$lt_lt_cv_prog_compiler_c_o_RC +- +-# Must we lock files when doing compilation? +-need_locks=$lt_need_locks +- +-# Do we need the lib prefix for modules? +-need_lib_prefix=$need_lib_prefix +- +-# Do we need a version for libraries? +-need_version=$need_version +- +-# Whether dlopen is supported. +-dlopen_support=$enable_dlopen +- +-# Whether dlopen of programs is supported. +-dlopen_self=$enable_dlopen_self +- +-# Whether dlopen of statically linked programs is supported. +-dlopen_self_static=$enable_dlopen_self_static +- +-# Compiler flag to prevent dynamic linking. +-link_static_flag=$lt_lt_prog_compiler_static_RC +- +-# Compiler flag to turn off builtin functions. +-no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_RC +- +-# Compiler flag to allow reflexive dlopens. +-export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_RC +- +-# Compiler flag to generate shared objects directly from archives. +-whole_archive_flag_spec=$lt_whole_archive_flag_spec_RC +- +-# Compiler flag to generate thread-safe objects. +-thread_safe_flag_spec=$lt_thread_safe_flag_spec_RC +- +-# Library versioning type. +-version_type=$version_type +- +-# Format of library name prefix. +-libname_spec=$lt_libname_spec +- +-# List of archive names. First name is the real one, the rest are links. +-# The last name is the one that the linker finds with -lNAME. +-library_names_spec=$lt_library_names_spec +- +-# The coded name of the library, if different from the real name. +-soname_spec=$lt_soname_spec +- +-# Commands used to build and install an old-style archive. +-RANLIB=$lt_RANLIB +-old_archive_cmds=$lt_old_archive_cmds_RC +-old_postinstall_cmds=$lt_old_postinstall_cmds +-old_postuninstall_cmds=$lt_old_postuninstall_cmds +- +-# Create an old-style archive from a shared archive. +-old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_RC +- +-# Create a temporary old-style archive to link instead of a shared archive. +-old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_RC +- +-# Commands used to build and install a shared archive. +-archive_cmds=$lt_archive_cmds_RC +-archive_expsym_cmds=$lt_archive_expsym_cmds_RC +-postinstall_cmds=$lt_postinstall_cmds +-postuninstall_cmds=$lt_postuninstall_cmds +- +-# Commands used to build a loadable module (assumed same as above if empty) +-module_cmds=$lt_module_cmds_RC +-module_expsym_cmds=$lt_module_expsym_cmds_RC +- +-# Commands to strip libraries. +-old_striplib=$lt_old_striplib +-striplib=$lt_striplib +- +-# Dependencies to place before the objects being linked to create a +-# shared library. +-predep_objects=$lt_predep_objects_RC +- +-# Dependencies to place after the objects being linked to create a +-# shared library. +-postdep_objects=$lt_postdep_objects_RC +- +-# Dependencies to place before the objects being linked to create a +-# shared library. +-predeps=$lt_predeps_RC +- +-# Dependencies to place after the objects being linked to create a +-# shared library. +-postdeps=$lt_postdeps_RC +- +-# The directories searched by this compiler when creating a shared +-# library +-compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_RC +- +-# The library search path used internally by the compiler when linking +-# a shared library. +-compiler_lib_search_path=$lt_compiler_lib_search_path_RC +- +-# Method to check whether dependent libraries are shared objects. +-deplibs_check_method=$lt_deplibs_check_method +- +-# Command to use when deplibs_check_method == file_magic. +-file_magic_cmd=$lt_file_magic_cmd +- +-# Flag that allows shared libraries with undefined symbols to be built. +-allow_undefined_flag=$lt_allow_undefined_flag_RC +- +-# Flag that forces no undefined symbols. +-no_undefined_flag=$lt_no_undefined_flag_RC +- +-# Commands used to finish a libtool library installation in a directory. +-finish_cmds=$lt_finish_cmds +- +-# Same as above, but a single script fragment to be evaled but not shown. +-finish_eval=$lt_finish_eval +- +-# Take the output of nm and produce a listing of raw symbols and C names. +-global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe +- +-# Transform the output of nm in a proper C declaration +-global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl +- +-# Transform the output of nm in a C name address pair +-global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address +- +-# This is the shared library runtime path variable. +-runpath_var=$runpath_var +- +-# This is the shared library path variable. +-shlibpath_var=$shlibpath_var +- +-# Is shlibpath searched before the hard-coded library search path? +-shlibpath_overrides_runpath=$shlibpath_overrides_runpath +- +-# How to hardcode a shared library path into an executable. +-hardcode_action=$hardcode_action_RC +- +-# Whether we should hardcode library paths into libraries. +-hardcode_into_libs=$hardcode_into_libs +- +-# Flag to hardcode \$libdir into a binary during linking. +-# This must work even if \$libdir does not exist. +-hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_RC +- +-# If ld is used when linking, flag to hardcode \$libdir into +-# a binary during linking. This must work even if \$libdir does +-# not exist. +-hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_RC +- +-# Whether we need a single -rpath flag with a separated argument. +-hardcode_libdir_separator=$lt_hardcode_libdir_separator_RC +- +-# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the +-# resulting binary. +-hardcode_direct=$hardcode_direct_RC +- +-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the +-# resulting binary. +-hardcode_minus_L=$hardcode_minus_L_RC +- +-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into +-# the resulting binary. +-hardcode_shlibpath_var=$hardcode_shlibpath_var_RC +- +-# Set to yes if building a shared library automatically hardcodes DIR into the library +-# and all subsequent libraries and executables linked against it. +-hardcode_automatic=$hardcode_automatic_RC +- +-# Variables whose values should be saved in libtool wrapper scripts and +-# restored at relink time. +-variables_saved_for_relink="$variables_saved_for_relink" +- +-# Whether libtool must link a program against all its dependency libraries. +-link_all_deplibs=$link_all_deplibs_RC +- +-# Compile-time system search path for libraries +-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec +- +-# Run-time system search path for libraries +-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec +- +-# Fix the shell variable \$srcfile for the compiler. +-fix_srcfile_path=$lt_fix_srcfile_path +- +-# Set to yes if exported symbols are required. +-always_export_symbols=$always_export_symbols_RC +- +-# The commands to list exported symbols. +-export_symbols_cmds=$lt_export_symbols_cmds_RC +- +-# The commands to extract the exported symbol list from a shared archive. +-extract_expsyms_cmds=$lt_extract_expsyms_cmds +- +-# Symbols that should not be listed in the preloaded symbols. +-exclude_expsyms=$lt_exclude_expsyms_RC +- +-# Symbols that must always be exported. +-include_expsyms=$lt_include_expsyms_RC +- +-# ### END LIBTOOL TAG CONFIG: $tagname +- +-__EOF__ +- +- +-else +- # If there is no Makefile yet, we rely on a make rule to execute +- # `config.status --recheck' to rerun these tests and create the +- # libtool script then. +- ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` +- if test -f "$ltmain_in"; then +- test -f Makefile && make "$ltmain" +- fi +-fi +- +- +-ac_ext=c +-ac_cpp='$CPP $CPPFLAGS' +-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +-ac_compiler_gnu=$ac_cv_c_compiler_gnu +- +-CC="$lt_save_CC" +- +- ;; +- +- *) +- { { $as_echo "$as_me:$LINENO: error: Unsupported tag name: $tagname" >&5 +-$as_echo "$as_me: error: Unsupported tag name: $tagname" >&2;} +- { (exit 1); exit 1; }; } +- ;; +- esac +- +- # Append the new tag name to the list of available tags. +- if test -n "$tagname" ; then +- available_tags="$available_tags $tagname" +- fi +- fi +- done +- IFS="$lt_save_ifs" +- +- # Now substitute the updated list of available tags. +- if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then +- mv "${ofile}T" "$ofile" +- chmod +x "$ofile" +- else +- rm -f "${ofile}T" +- { { $as_echo "$as_me:$LINENO: error: unable to update list of available tagged configurations." >&5 +-$as_echo "$as_me: error: unable to update list of available tagged configurations." >&2;} +- { (exit 1); exit 1; }; } +- fi +-fi +- +- +- +-# This can be used to rebuild libtool when needed +-LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh" +- +-# Always use our own libtool. +-LIBTOOL='$(SHELL) $(top_builddir)/libtool' +- +-# Prevent multiple expansion +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- +- +-# Extract the first word of "glib-genmarshal", so it can be a program name with args. +-set dummy glib-genmarshal; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } +-if test "${ac_cv_path_GLIB_GENMARSHAL+set}" = set; then +- $as_echo_n "(cached) " >&6 +-else +- case $GLIB_GENMARSHAL in +- [\\/]* | ?:[\\/]*) +- ac_cv_path_GLIB_GENMARSHAL="$GLIB_GENMARSHAL" # Let the user override the test with a path. +- ;; +- *) +- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +-for as_dir in $PATH +-do +- IFS=$as_save_IFS +- test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do +- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then +- ac_cv_path_GLIB_GENMARSHAL="$as_dir/$ac_word$ac_exec_ext" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 +- break 2 +- fi +-done +-done +-IFS=$as_save_IFS +- +- ;; +-esac +-fi +-GLIB_GENMARSHAL=$ac_cv_path_GLIB_GENMARSHAL +-if test -n "$GLIB_GENMARSHAL"; then +- { $as_echo "$as_me:$LINENO: result: $GLIB_GENMARSHAL" >&5 +-$as_echo "$GLIB_GENMARSHAL" >&6; } +-else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } +-fi +- +- +- +-ACLOCAL_AMFLAGS="\${ACLOCAL_FLAGS}" +- +- +- +- +- +- if test $USE_MAINTAINER_MODE = yes; then +- DISABLE_DEPRECATED="-DG_DISABLE_DEPRECATED -DGDK_DISABLE_DEPRECATED -DGDK_PIXBUF_DISABLE_DEPRECATED -DPANGO_DISABLE_DEPRECATED -DGTK_DISABLE_DEPRECATED -DGCONF_DISABLE_DEPRECATED -DBONOBO_DISABLE_DEPRECATED -DBONOBO_UI_DISABLE_DEPRECATED -DGNOME_VFS_DISABLE_DEPRECATED -DGNOME_DISABLE_DEPRECATED -DLIBGLADE_DISABLE_DEPRECATED -DWNCK_DISABLE_DEPRECATED -DLIBSOUP_DISABLE_DEPRECATED" +- else +- DISABLE_DEPRECATED="" +- fi +- +- +- +- +-# Check whether --with-at-spi-registryd-directory was given. +-if test "${with_at_spi_registryd_directory+set}" = set; then +- withval=$with_at_spi_registryd_directory; +-else +- with_at_spi_registryd_directory="\${libexecdir}" +-fi +- +- +-AT_SPI_REGISTRYD_DIR=$with_at_spi_registryd_directory +- +- +- +- +- # Check whether --enable-compile-warnings was given. +-if test "${enable_compile_warnings+set}" = set; then +- enableval=$enable_compile_warnings; +-else +- enable_compile_warnings="maximum" +-fi +- +- +- warnCFLAGS= +- if test "x$GCC" != xyes; then +- enable_compile_warnings=no +- fi +- +- warning_flags= +- realsave_CFLAGS="$CFLAGS" +- +- case "$enable_compile_warnings" in +- no) +- warning_flags= +- ;; +- minimum) +- warning_flags="-Wall" +- ;; +- yes) +- warning_flags="-Wall -Wmissing-prototypes" +- ;; +- maximum|error) +- warning_flags="-Wall -Wmissing-prototypes -Wnested-externs -Wpointer-arith" +- CFLAGS="$warning_flags $CFLAGS" +- for option in -Wno-sign-compare; do +- SAVE_CFLAGS="$CFLAGS" +- CFLAGS="$CFLAGS $option" +- { $as_echo "$as_me:$LINENO: checking whether gcc understands $option" >&5 +-$as_echo_n "checking whether gcc understands $option... " >&6; } +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +- +-int +-main () +-{ +- +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext +-if { (ac_try="$ac_compile" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_compile") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest.$ac_objext; then +- has_option=yes +-else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- has_option=no +-fi +- +-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +- CFLAGS="$SAVE_CFLAGS" +- { $as_echo "$as_me:$LINENO: result: $has_option" >&5 +-$as_echo "$has_option" >&6; } +- if test $has_option = yes; then +- warning_flags="$warning_flags $option" +- fi +- unset has_option +- unset SAVE_CFLAGS +- done +- unset option +- if test "$enable_compile_warnings" = "error" ; then +- warning_flags="$warning_flags -Werror" +- fi +- ;; +- *) +- { { $as_echo "$as_me:$LINENO: error: Unknown argument '$enable_compile_warnings' to --enable-compile-warnings" >&5 +-$as_echo "$as_me: error: Unknown argument '$enable_compile_warnings' to --enable-compile-warnings" >&2;} +- { (exit 1); exit 1; }; } +- ;; +- esac +- CFLAGS="$realsave_CFLAGS" +- { $as_echo "$as_me:$LINENO: checking what warning flags to pass to the C compiler" >&5 +-$as_echo_n "checking what warning flags to pass to the C compiler... " >&6; } +- { $as_echo "$as_me:$LINENO: result: $warning_flags" >&5 +-$as_echo "$warning_flags" >&6; } +- +- # Check whether --enable-iso-c was given. +-if test "${enable_iso_c+set}" = set; then +- enableval=$enable_iso_c; +-else +- enable_iso_c=no +-fi +- +- +- { $as_echo "$as_me:$LINENO: checking what language compliance flags to pass to the C compiler" >&5 +-$as_echo_n "checking what language compliance flags to pass to the C compiler... " >&6; } +- complCFLAGS= +- if test "x$enable_iso_c" != "xno"; then +- if test "x$GCC" = "xyes"; then +- case " $CFLAGS " in +- *\ \ -ansi\ \ *) ;; +- *) complCFLAGS="$complCFLAGS -ansi" ;; +- esac +- case " $CFLAGS " in +- *\ \ -pedantic\ \ *) ;; +- *) complCFLAGS="$complCFLAGS -pedantic" ;; +- esac +- fi +- fi +- { $as_echo "$as_me:$LINENO: result: $complCFLAGS" >&5 +-$as_echo "$complCFLAGS" >&6; } +- +- WARN_CFLAGS="$warning_flags $complCFLAGS" +- +- +- +-# Check whether --enable-deprecations was given. +-if test "${enable_deprecations+set}" = set; then +- enableval=$enable_deprecations; +-else +- enable_deprecations=no +-fi +- +- +-if test "x$enable_deprecations" = "xyes"; then +- DISABLE_DEPRECATED_CFLAGS=$DISABLE_DEPRECATED +- +-fi +- +-GLIB_REQUIRED=2.16.0 +-LIBGNOMEUI_REQUIRED=2.2.0 +-GTK_REQUIRED=2.11.1 +-GLADE_REQUIRED=2.3.6 +-DBUS_GLIB_REQUIRED=0.76 +-POLKIT_GNOME_REQUIRED=0.7 +- +- +- +-if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then +- if test -n "$ac_tool_prefix"; then +- # Extract the first word of "${ac_tool_prefix}pkg-config", so it can be a program name with args. +-set dummy ${ac_tool_prefix}pkg-config; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } +-if test "${ac_cv_path_PKG_CONFIG+set}" = set; then +- $as_echo_n "(cached) " >&6 +-else +- case $PKG_CONFIG in +- [\\/]* | ?:[\\/]*) +- ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path. +- ;; +- *) +- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +-for as_dir in $PATH +-do +- IFS=$as_save_IFS +- test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do +- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then +- ac_cv_path_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 +- break 2 +- fi +-done +-done +-IFS=$as_save_IFS +- +- ;; +-esac +-fi +-PKG_CONFIG=$ac_cv_path_PKG_CONFIG +-if test -n "$PKG_CONFIG"; then +- { $as_echo "$as_me:$LINENO: result: $PKG_CONFIG" >&5 +-$as_echo "$PKG_CONFIG" >&6; } +-else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } +-fi +- +- +-fi +-if test -z "$ac_cv_path_PKG_CONFIG"; then +- ac_pt_PKG_CONFIG=$PKG_CONFIG +- # Extract the first word of "pkg-config", so it can be a program name with args. +-set dummy pkg-config; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } +-if test "${ac_cv_path_ac_pt_PKG_CONFIG+set}" = set; then +- $as_echo_n "(cached) " >&6 +-else +- case $ac_pt_PKG_CONFIG in +- [\\/]* | ?:[\\/]*) +- ac_cv_path_ac_pt_PKG_CONFIG="$ac_pt_PKG_CONFIG" # Let the user override the test with a path. +- ;; +- *) +- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +-for as_dir in $PATH +-do +- IFS=$as_save_IFS +- test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do +- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then +- ac_cv_path_ac_pt_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 +- break 2 +- fi +-done +-done +-IFS=$as_save_IFS +- +- ;; +-esac +-fi +-ac_pt_PKG_CONFIG=$ac_cv_path_ac_pt_PKG_CONFIG +-if test -n "$ac_pt_PKG_CONFIG"; then +- { $as_echo "$as_me:$LINENO: result: $ac_pt_PKG_CONFIG" >&5 +-$as_echo "$ac_pt_PKG_CONFIG" >&6; } +-else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } +-fi +- +- if test "x$ac_pt_PKG_CONFIG" = x; then +- PKG_CONFIG="" +- else +- case $cross_compiling:$ac_tool_warned in +-yes:) +-{ $as_echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools +-whose name does not start with the host triplet. If you think this +-configuration is useful to you, please write to autoconf@gnu.org." >&5 +-$as_echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools +-whose name does not start with the host triplet. If you think this +-configuration is useful to you, please write to autoconf@gnu.org." >&2;} +-ac_tool_warned=yes ;; +-esac +- PKG_CONFIG=$ac_pt_PKG_CONFIG +- fi +-else +- PKG_CONFIG="$ac_cv_path_PKG_CONFIG" +-fi +- +-fi +-if test -n "$PKG_CONFIG"; then +- _pkg_min_version=0.9.0 +- { $as_echo "$as_me:$LINENO: checking pkg-config is at least version $_pkg_min_version" >&5 +-$as_echo_n "checking pkg-config is at least version $_pkg_min_version... " >&6; } +- if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then +- { $as_echo "$as_me:$LINENO: result: yes" >&5 +-$as_echo "yes" >&6; } +- else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } +- PKG_CONFIG="" +- fi +- +-fi +- +- +-pkg_failed=no +-{ $as_echo "$as_me:$LINENO: checking for GNOME_SESSION" >&5 +-$as_echo_n "checking for GNOME_SESSION... " >&6; } +- +-if test -n "$GNOME_SESSION_CFLAGS"; then +- pkg_cv_GNOME_SESSION_CFLAGS="$GNOME_SESSION_CFLAGS" +- elif test -n "$PKG_CONFIG"; then +- if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"glib-2.0 >= \$GLIB_REQUIRED +- gio-2.0 >= \$GLIB_REQUIRED +- gtk+-2.0 >= \$GTK_REQUIRED +- dbus-glib-1 >= \$DBUS_GLIB_REQUIRED +- libglade-2.0 >= \$GLADE_REQUIRED +-\"") >&5 +- ($PKG_CONFIG --exists --print-errors "glib-2.0 >= $GLIB_REQUIRED +- gio-2.0 >= $GLIB_REQUIRED +- gtk+-2.0 >= $GTK_REQUIRED +- dbus-glib-1 >= $DBUS_GLIB_REQUIRED +- libglade-2.0 >= $GLADE_REQUIRED +-") 2>&5 +- ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then +- pkg_cv_GNOME_SESSION_CFLAGS=`$PKG_CONFIG --cflags "glib-2.0 >= $GLIB_REQUIRED +- gio-2.0 >= $GLIB_REQUIRED +- gtk+-2.0 >= $GTK_REQUIRED +- dbus-glib-1 >= $DBUS_GLIB_REQUIRED +- libglade-2.0 >= $GLADE_REQUIRED +-" 2>/dev/null` +-else +- pkg_failed=yes +-fi +- else +- pkg_failed=untried +-fi +-if test -n "$GNOME_SESSION_LIBS"; then +- pkg_cv_GNOME_SESSION_LIBS="$GNOME_SESSION_LIBS" +- elif test -n "$PKG_CONFIG"; then +- if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"glib-2.0 >= \$GLIB_REQUIRED +- gio-2.0 >= \$GLIB_REQUIRED +- gtk+-2.0 >= \$GTK_REQUIRED +- dbus-glib-1 >= \$DBUS_GLIB_REQUIRED +- libglade-2.0 >= \$GLADE_REQUIRED +-\"") >&5 +- ($PKG_CONFIG --exists --print-errors "glib-2.0 >= $GLIB_REQUIRED +- gio-2.0 >= $GLIB_REQUIRED +- gtk+-2.0 >= $GTK_REQUIRED +- dbus-glib-1 >= $DBUS_GLIB_REQUIRED +- libglade-2.0 >= $GLADE_REQUIRED +-") 2>&5 +- ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then +- pkg_cv_GNOME_SESSION_LIBS=`$PKG_CONFIG --libs "glib-2.0 >= $GLIB_REQUIRED +- gio-2.0 >= $GLIB_REQUIRED +- gtk+-2.0 >= $GTK_REQUIRED +- dbus-glib-1 >= $DBUS_GLIB_REQUIRED +- libglade-2.0 >= $GLADE_REQUIRED +-" 2>/dev/null` +-else +- pkg_failed=yes +-fi +- else +- pkg_failed=untried +-fi +- +- +- +-if test $pkg_failed = yes; then +- +-if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then +- _pkg_short_errors_supported=yes +-else +- _pkg_short_errors_supported=no +-fi +- if test $_pkg_short_errors_supported = yes; then +- GNOME_SESSION_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "glib-2.0 >= $GLIB_REQUIRED +- gio-2.0 >= $GLIB_REQUIRED +- gtk+-2.0 >= $GTK_REQUIRED +- dbus-glib-1 >= $DBUS_GLIB_REQUIRED +- libglade-2.0 >= $GLADE_REQUIRED +-" 2>&1` +- else +- GNOME_SESSION_PKG_ERRORS=`$PKG_CONFIG --print-errors "glib-2.0 >= $GLIB_REQUIRED +- gio-2.0 >= $GLIB_REQUIRED +- gtk+-2.0 >= $GTK_REQUIRED +- dbus-glib-1 >= $DBUS_GLIB_REQUIRED +- libglade-2.0 >= $GLADE_REQUIRED +-" 2>&1` +- fi +- # Put the nasty error message in config.log where it belongs +- echo "$GNOME_SESSION_PKG_ERRORS" >&5 +- +- { { $as_echo "$as_me:$LINENO: error: Package requirements (glib-2.0 >= $GLIB_REQUIRED +- gio-2.0 >= $GLIB_REQUIRED +- gtk+-2.0 >= $GTK_REQUIRED +- dbus-glib-1 >= $DBUS_GLIB_REQUIRED +- libglade-2.0 >= $GLADE_REQUIRED +-) were not met: +- +-$GNOME_SESSION_PKG_ERRORS +- +-Consider adjusting the PKG_CONFIG_PATH environment variable if you +-installed software in a non-standard prefix. +- +-Alternatively, you may set the environment variables GNOME_SESSION_CFLAGS +-and GNOME_SESSION_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details. +-" >&5 +-$as_echo "$as_me: error: Package requirements (glib-2.0 >= $GLIB_REQUIRED +- gio-2.0 >= $GLIB_REQUIRED +- gtk+-2.0 >= $GTK_REQUIRED +- dbus-glib-1 >= $DBUS_GLIB_REQUIRED +- libglade-2.0 >= $GLADE_REQUIRED +-) were not met: +- +-$GNOME_SESSION_PKG_ERRORS +- +-Consider adjusting the PKG_CONFIG_PATH environment variable if you +-installed software in a non-standard prefix. +- +-Alternatively, you may set the environment variables GNOME_SESSION_CFLAGS +-and GNOME_SESSION_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details. +-" >&2;} +- { (exit 1); exit 1; }; } +-elif test $pkg_failed = untried; then +- { { $as_echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it +-is in your PATH or set the PKG_CONFIG environment variable to the full +-path to pkg-config. +- +-Alternatively, you may set the environment variables GNOME_SESSION_CFLAGS +-and GNOME_SESSION_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details. +- +-To get pkg-config, see . +-See \`config.log' for more details." >&5 +-$as_echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it +-is in your PATH or set the PKG_CONFIG environment variable to the full +-path to pkg-config. +- +-Alternatively, you may set the environment variables GNOME_SESSION_CFLAGS +-and GNOME_SESSION_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details. +- +-To get pkg-config, see . +-See \`config.log' for more details." >&2;} +- { (exit 1); exit 1; }; } +-else +- GNOME_SESSION_CFLAGS=$pkg_cv_GNOME_SESSION_CFLAGS +- GNOME_SESSION_LIBS=$pkg_cv_GNOME_SESSION_LIBS +- { $as_echo "$as_me:$LINENO: result: yes" >&5 +-$as_echo "yes" >&6; } +- : +-fi +- +- +-pkg_failed=no +-{ $as_echo "$as_me:$LINENO: checking for SESSION_PROPERTIES" >&5 +-$as_echo_n "checking for SESSION_PROPERTIES... " >&6; } +- +-if test -n "$SESSION_PROPERTIES_CFLAGS"; then +- pkg_cv_SESSION_PROPERTIES_CFLAGS="$SESSION_PROPERTIES_CFLAGS" +- elif test -n "$PKG_CONFIG"; then +- if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"glib-2.0 >= \$GLIB_REQUIRED +- gtk+-2.0 >= \$GTK_REQUIRED +- libglade-2.0 >= \$GLADE_REQUIRED +-\"") >&5 +- ($PKG_CONFIG --exists --print-errors "glib-2.0 >= $GLIB_REQUIRED +- gtk+-2.0 >= $GTK_REQUIRED +- libglade-2.0 >= $GLADE_REQUIRED +-") 2>&5 +- ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then +- pkg_cv_SESSION_PROPERTIES_CFLAGS=`$PKG_CONFIG --cflags "glib-2.0 >= $GLIB_REQUIRED +- gtk+-2.0 >= $GTK_REQUIRED +- libglade-2.0 >= $GLADE_REQUIRED +-" 2>/dev/null` +-else +- pkg_failed=yes +-fi +- else +- pkg_failed=untried +-fi +-if test -n "$SESSION_PROPERTIES_LIBS"; then +- pkg_cv_SESSION_PROPERTIES_LIBS="$SESSION_PROPERTIES_LIBS" +- elif test -n "$PKG_CONFIG"; then +- if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"glib-2.0 >= \$GLIB_REQUIRED +- gtk+-2.0 >= \$GTK_REQUIRED +- libglade-2.0 >= \$GLADE_REQUIRED +-\"") >&5 +- ($PKG_CONFIG --exists --print-errors "glib-2.0 >= $GLIB_REQUIRED +- gtk+-2.0 >= $GTK_REQUIRED +- libglade-2.0 >= $GLADE_REQUIRED +-") 2>&5 +- ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then +- pkg_cv_SESSION_PROPERTIES_LIBS=`$PKG_CONFIG --libs "glib-2.0 >= $GLIB_REQUIRED +- gtk+-2.0 >= $GTK_REQUIRED +- libglade-2.0 >= $GLADE_REQUIRED +-" 2>/dev/null` +-else +- pkg_failed=yes +-fi +- else +- pkg_failed=untried +-fi +- +- +- +-if test $pkg_failed = yes; then +- +-if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then +- _pkg_short_errors_supported=yes +-else +- _pkg_short_errors_supported=no +-fi +- if test $_pkg_short_errors_supported = yes; then +- SESSION_PROPERTIES_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "glib-2.0 >= $GLIB_REQUIRED +- gtk+-2.0 >= $GTK_REQUIRED +- libglade-2.0 >= $GLADE_REQUIRED +-" 2>&1` +- else +- SESSION_PROPERTIES_PKG_ERRORS=`$PKG_CONFIG --print-errors "glib-2.0 >= $GLIB_REQUIRED +- gtk+-2.0 >= $GTK_REQUIRED +- libglade-2.0 >= $GLADE_REQUIRED +-" 2>&1` +- fi +- # Put the nasty error message in config.log where it belongs +- echo "$SESSION_PROPERTIES_PKG_ERRORS" >&5 +- +- { { $as_echo "$as_me:$LINENO: error: Package requirements (glib-2.0 >= $GLIB_REQUIRED +- gtk+-2.0 >= $GTK_REQUIRED +- libglade-2.0 >= $GLADE_REQUIRED +-) were not met: +- +-$SESSION_PROPERTIES_PKG_ERRORS +- +-Consider adjusting the PKG_CONFIG_PATH environment variable if you +-installed software in a non-standard prefix. +- +-Alternatively, you may set the environment variables SESSION_PROPERTIES_CFLAGS +-and SESSION_PROPERTIES_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details. +-" >&5 +-$as_echo "$as_me: error: Package requirements (glib-2.0 >= $GLIB_REQUIRED +- gtk+-2.0 >= $GTK_REQUIRED +- libglade-2.0 >= $GLADE_REQUIRED +-) were not met: +- +-$SESSION_PROPERTIES_PKG_ERRORS +- +-Consider adjusting the PKG_CONFIG_PATH environment variable if you +-installed software in a non-standard prefix. +- +-Alternatively, you may set the environment variables SESSION_PROPERTIES_CFLAGS +-and SESSION_PROPERTIES_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details. +-" >&2;} +- { (exit 1); exit 1; }; } +-elif test $pkg_failed = untried; then +- { { $as_echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it +-is in your PATH or set the PKG_CONFIG environment variable to the full +-path to pkg-config. +- +-Alternatively, you may set the environment variables SESSION_PROPERTIES_CFLAGS +-and SESSION_PROPERTIES_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details. +- +-To get pkg-config, see . +-See \`config.log' for more details." >&5 +-$as_echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it +-is in your PATH or set the PKG_CONFIG environment variable to the full +-path to pkg-config. +- +-Alternatively, you may set the environment variables SESSION_PROPERTIES_CFLAGS +-and SESSION_PROPERTIES_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details. +- +-To get pkg-config, see . +-See \`config.log' for more details." >&2;} +- { (exit 1); exit 1; }; } +-else +- SESSION_PROPERTIES_CFLAGS=$pkg_cv_SESSION_PROPERTIES_CFLAGS +- SESSION_PROPERTIES_LIBS=$pkg_cv_SESSION_PROPERTIES_LIBS +- { $as_echo "$as_me:$LINENO: result: yes" >&5 +-$as_echo "yes" >&6; } +- : +-fi +- +- +-pkg_failed=no +-{ $as_echo "$as_me:$LINENO: checking for SPLASH" >&5 +-$as_echo_n "checking for SPLASH... " >&6; } +- +-if test -n "$SPLASH_CFLAGS"; then +- pkg_cv_SPLASH_CFLAGS="$SPLASH_CFLAGS" +- elif test -n "$PKG_CONFIG"; then +- if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"glib-2.0 >= \$GLIB_REQUIRED +- gtk+-2.0 >= \$GTK_REQUIRED +- dbus-glib-1 >= \$DBUS_GLIB_REQUIRED +- libstartup-notification-1.0 +- gconf-2.0\"") >&5 +- ($PKG_CONFIG --exists --print-errors "glib-2.0 >= $GLIB_REQUIRED +- gtk+-2.0 >= $GTK_REQUIRED +- dbus-glib-1 >= $DBUS_GLIB_REQUIRED +- libstartup-notification-1.0 +- gconf-2.0") 2>&5 +- ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then +- pkg_cv_SPLASH_CFLAGS=`$PKG_CONFIG --cflags "glib-2.0 >= $GLIB_REQUIRED +- gtk+-2.0 >= $GTK_REQUIRED +- dbus-glib-1 >= $DBUS_GLIB_REQUIRED +- libstartup-notification-1.0 +- gconf-2.0" 2>/dev/null` +-else +- pkg_failed=yes +-fi +- else +- pkg_failed=untried +-fi +-if test -n "$SPLASH_LIBS"; then +- pkg_cv_SPLASH_LIBS="$SPLASH_LIBS" +- elif test -n "$PKG_CONFIG"; then +- if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"glib-2.0 >= \$GLIB_REQUIRED +- gtk+-2.0 >= \$GTK_REQUIRED +- dbus-glib-1 >= \$DBUS_GLIB_REQUIRED +- libstartup-notification-1.0 +- gconf-2.0\"") >&5 +- ($PKG_CONFIG --exists --print-errors "glib-2.0 >= $GLIB_REQUIRED +- gtk+-2.0 >= $GTK_REQUIRED +- dbus-glib-1 >= $DBUS_GLIB_REQUIRED +- libstartup-notification-1.0 +- gconf-2.0") 2>&5 +- ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then +- pkg_cv_SPLASH_LIBS=`$PKG_CONFIG --libs "glib-2.0 >= $GLIB_REQUIRED +- gtk+-2.0 >= $GTK_REQUIRED +- dbus-glib-1 >= $DBUS_GLIB_REQUIRED +- libstartup-notification-1.0 +- gconf-2.0" 2>/dev/null` +-else +- pkg_failed=yes +-fi +- else +- pkg_failed=untried +-fi +- +- +- +-if test $pkg_failed = yes; then +- +-if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then +- _pkg_short_errors_supported=yes +-else +- _pkg_short_errors_supported=no +-fi +- if test $_pkg_short_errors_supported = yes; then +- SPLASH_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "glib-2.0 >= $GLIB_REQUIRED +- gtk+-2.0 >= $GTK_REQUIRED +- dbus-glib-1 >= $DBUS_GLIB_REQUIRED +- libstartup-notification-1.0 +- gconf-2.0" 2>&1` +- else +- SPLASH_PKG_ERRORS=`$PKG_CONFIG --print-errors "glib-2.0 >= $GLIB_REQUIRED +- gtk+-2.0 >= $GTK_REQUIRED +- dbus-glib-1 >= $DBUS_GLIB_REQUIRED +- libstartup-notification-1.0 +- gconf-2.0" 2>&1` +- fi +- # Put the nasty error message in config.log where it belongs +- echo "$SPLASH_PKG_ERRORS" >&5 +- +- { { $as_echo "$as_me:$LINENO: error: Package requirements (glib-2.0 >= $GLIB_REQUIRED +- gtk+-2.0 >= $GTK_REQUIRED +- dbus-glib-1 >= $DBUS_GLIB_REQUIRED +- libstartup-notification-1.0 +- gconf-2.0) were not met: +- +-$SPLASH_PKG_ERRORS +- +-Consider adjusting the PKG_CONFIG_PATH environment variable if you +-installed software in a non-standard prefix. +- +-Alternatively, you may set the environment variables SPLASH_CFLAGS +-and SPLASH_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details. +-" >&5 +-$as_echo "$as_me: error: Package requirements (glib-2.0 >= $GLIB_REQUIRED +- gtk+-2.0 >= $GTK_REQUIRED +- dbus-glib-1 >= $DBUS_GLIB_REQUIRED +- libstartup-notification-1.0 +- gconf-2.0) were not met: +- +-$SPLASH_PKG_ERRORS +- +-Consider adjusting the PKG_CONFIG_PATH environment variable if you +-installed software in a non-standard prefix. +- +-Alternatively, you may set the environment variables SPLASH_CFLAGS +-and SPLASH_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details. +-" >&2;} +- { (exit 1); exit 1; }; } +-elif test $pkg_failed = untried; then +- { { $as_echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it +-is in your PATH or set the PKG_CONFIG environment variable to the full +-path to pkg-config. +- +-Alternatively, you may set the environment variables SPLASH_CFLAGS +-and SPLASH_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details. +- +-To get pkg-config, see . +-See \`config.log' for more details." >&5 +-$as_echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it +-is in your PATH or set the PKG_CONFIG environment variable to the full +-path to pkg-config. +- +-Alternatively, you may set the environment variables SPLASH_CFLAGS +-and SPLASH_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details. +- +-To get pkg-config, see . +-See \`config.log' for more details." >&2;} +- { (exit 1); exit 1; }; } +-else +- SPLASH_CFLAGS=$pkg_cv_SPLASH_CFLAGS +- SPLASH_LIBS=$pkg_cv_SPLASH_LIBS +- { $as_echo "$as_me:$LINENO: result: yes" >&5 +-$as_echo "yes" >&6; } +- : +-fi +- +- +-pkg_failed=no +-{ $as_echo "$as_me:$LINENO: checking for COMPAT" >&5 +-$as_echo_n "checking for COMPAT... " >&6; } +- +-if test -n "$COMPAT_CFLAGS"; then +- pkg_cv_COMPAT_CFLAGS="$COMPAT_CFLAGS" +- elif test -n "$PKG_CONFIG"; then +- if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"gtk+-2.0 >= \$GTK_REQUIRED +- dbus-glib-1 >= \$DBUS_GLIB_REQUIRED\"") >&5 +- ($PKG_CONFIG --exists --print-errors "gtk+-2.0 >= $GTK_REQUIRED +- dbus-glib-1 >= $DBUS_GLIB_REQUIRED") 2>&5 +- ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then +- pkg_cv_COMPAT_CFLAGS=`$PKG_CONFIG --cflags "gtk+-2.0 >= $GTK_REQUIRED +- dbus-glib-1 >= $DBUS_GLIB_REQUIRED" 2>/dev/null` +-else +- pkg_failed=yes +-fi +- else +- pkg_failed=untried +-fi +-if test -n "$COMPAT_LIBS"; then +- pkg_cv_COMPAT_LIBS="$COMPAT_LIBS" +- elif test -n "$PKG_CONFIG"; then +- if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"gtk+-2.0 >= \$GTK_REQUIRED +- dbus-glib-1 >= \$DBUS_GLIB_REQUIRED\"") >&5 +- ($PKG_CONFIG --exists --print-errors "gtk+-2.0 >= $GTK_REQUIRED +- dbus-glib-1 >= $DBUS_GLIB_REQUIRED") 2>&5 +- ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then +- pkg_cv_COMPAT_LIBS=`$PKG_CONFIG --libs "gtk+-2.0 >= $GTK_REQUIRED +- dbus-glib-1 >= $DBUS_GLIB_REQUIRED" 2>/dev/null` +-else +- pkg_failed=yes +-fi +- else +- pkg_failed=untried +-fi +- +- +- +-if test $pkg_failed = yes; then +- +-if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then +- _pkg_short_errors_supported=yes +-else +- _pkg_short_errors_supported=no +-fi +- if test $_pkg_short_errors_supported = yes; then +- COMPAT_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "gtk+-2.0 >= $GTK_REQUIRED +- dbus-glib-1 >= $DBUS_GLIB_REQUIRED" 2>&1` +- else +- COMPAT_PKG_ERRORS=`$PKG_CONFIG --print-errors "gtk+-2.0 >= $GTK_REQUIRED +- dbus-glib-1 >= $DBUS_GLIB_REQUIRED" 2>&1` +- fi +- # Put the nasty error message in config.log where it belongs +- echo "$COMPAT_PKG_ERRORS" >&5 +- +- { { $as_echo "$as_me:$LINENO: error: Package requirements (gtk+-2.0 >= $GTK_REQUIRED +- dbus-glib-1 >= $DBUS_GLIB_REQUIRED) were not met: +- +-$COMPAT_PKG_ERRORS +- +-Consider adjusting the PKG_CONFIG_PATH environment variable if you +-installed software in a non-standard prefix. +- +-Alternatively, you may set the environment variables COMPAT_CFLAGS +-and COMPAT_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details. +-" >&5 +-$as_echo "$as_me: error: Package requirements (gtk+-2.0 >= $GTK_REQUIRED +- dbus-glib-1 >= $DBUS_GLIB_REQUIRED) were not met: +- +-$COMPAT_PKG_ERRORS +- +-Consider adjusting the PKG_CONFIG_PATH environment variable if you +-installed software in a non-standard prefix. +- +-Alternatively, you may set the environment variables COMPAT_CFLAGS +-and COMPAT_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details. +-" >&2;} +- { (exit 1); exit 1; }; } +-elif test $pkg_failed = untried; then +- { { $as_echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it +-is in your PATH or set the PKG_CONFIG environment variable to the full +-path to pkg-config. +- +-Alternatively, you may set the environment variables COMPAT_CFLAGS +-and COMPAT_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details. +- +-To get pkg-config, see . +-See \`config.log' for more details." >&5 +-$as_echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it +-is in your PATH or set the PKG_CONFIG environment variable to the full +-path to pkg-config. +- +-Alternatively, you may set the environment variables COMPAT_CFLAGS +-and COMPAT_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details. +- +-To get pkg-config, see . +-See \`config.log' for more details." >&2;} +- { (exit 1); exit 1; }; } +-else +- COMPAT_CFLAGS=$pkg_cv_COMPAT_CFLAGS +- COMPAT_LIBS=$pkg_cv_COMPAT_LIBS +- { $as_echo "$as_me:$LINENO: result: yes" >&5 +-$as_echo "yes" >&6; } +- : +-fi +- +- +-pkg_failed=no +-{ $as_echo "$as_me:$LINENO: checking for SM" >&5 +-$as_echo_n "checking for SM... " >&6; } +- +-if test -n "$SM_CFLAGS"; then +- pkg_cv_SM_CFLAGS="$SM_CFLAGS" +- elif test -n "$PKG_CONFIG"; then +- if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"sm\"") >&5 +- ($PKG_CONFIG --exists --print-errors "sm") 2>&5 +- ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then +- pkg_cv_SM_CFLAGS=`$PKG_CONFIG --cflags "sm" 2>/dev/null` +-else +- pkg_failed=yes +-fi +- else +- pkg_failed=untried +-fi +-if test -n "$SM_LIBS"; then +- pkg_cv_SM_LIBS="$SM_LIBS" +- elif test -n "$PKG_CONFIG"; then +- if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"sm\"") >&5 +- ($PKG_CONFIG --exists --print-errors "sm") 2>&5 +- ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then +- pkg_cv_SM_LIBS=`$PKG_CONFIG --libs "sm" 2>/dev/null` +-else +- pkg_failed=yes +-fi +- else +- pkg_failed=untried +-fi +- +- +- +-if test $pkg_failed = yes; then +- +-if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then +- _pkg_short_errors_supported=yes +-else +- _pkg_short_errors_supported=no +-fi +- if test $_pkg_short_errors_supported = yes; then +- SM_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "sm" 2>&1` +- else +- SM_PKG_ERRORS=`$PKG_CONFIG --print-errors "sm" 2>&1` +- fi +- # Put the nasty error message in config.log where it belongs +- echo "$SM_PKG_ERRORS" >&5 +- +- { { $as_echo "$as_me:$LINENO: error: Package requirements (sm) were not met: +- +-$SM_PKG_ERRORS +- +-Consider adjusting the PKG_CONFIG_PATH environment variable if you +-installed software in a non-standard prefix. +- +-Alternatively, you may set the environment variables SM_CFLAGS +-and SM_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details. +-" >&5 +-$as_echo "$as_me: error: Package requirements (sm) were not met: +- +-$SM_PKG_ERRORS +- +-Consider adjusting the PKG_CONFIG_PATH environment variable if you +-installed software in a non-standard prefix. +- +-Alternatively, you may set the environment variables SM_CFLAGS +-and SM_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details. +-" >&2;} +- { (exit 1); exit 1; }; } +-elif test $pkg_failed = untried; then +- { { $as_echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it +-is in your PATH or set the PKG_CONFIG environment variable to the full +-path to pkg-config. +- +-Alternatively, you may set the environment variables SM_CFLAGS +-and SM_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details. +- +-To get pkg-config, see . +-See \`config.log' for more details." >&5 +-$as_echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it +-is in your PATH or set the PKG_CONFIG environment variable to the full +-path to pkg-config. +- +-Alternatively, you may set the environment variables SM_CFLAGS +-and SM_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details. +- +-To get pkg-config, see . +-See \`config.log' for more details." >&2;} +- { (exit 1); exit 1; }; } +-else +- SM_CFLAGS=$pkg_cv_SM_CFLAGS +- SM_LIBS=$pkg_cv_SM_LIBS +- { $as_echo "$as_me:$LINENO: result: yes" >&5 +-$as_echo "yes" >&6; } +- : +-fi +- +-pkg_failed=no +-{ $as_echo "$as_me:$LINENO: checking for ICE" >&5 +-$as_echo_n "checking for ICE... " >&6; } +- +-if test -n "$ICE_CFLAGS"; then +- pkg_cv_ICE_CFLAGS="$ICE_CFLAGS" +- elif test -n "$PKG_CONFIG"; then +- if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"ice\"") >&5 +- ($PKG_CONFIG --exists --print-errors "ice") 2>&5 +- ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then +- pkg_cv_ICE_CFLAGS=`$PKG_CONFIG --cflags "ice" 2>/dev/null` +-else +- pkg_failed=yes +-fi +- else +- pkg_failed=untried +-fi +-if test -n "$ICE_LIBS"; then +- pkg_cv_ICE_LIBS="$ICE_LIBS" +- elif test -n "$PKG_CONFIG"; then +- if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"ice\"") >&5 +- ($PKG_CONFIG --exists --print-errors "ice") 2>&5 +- ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then +- pkg_cv_ICE_LIBS=`$PKG_CONFIG --libs "ice" 2>/dev/null` +-else +- pkg_failed=yes +-fi +- else +- pkg_failed=untried +-fi +- +- +- +-if test $pkg_failed = yes; then +- +-if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then +- _pkg_short_errors_supported=yes +-else +- _pkg_short_errors_supported=no +-fi +- if test $_pkg_short_errors_supported = yes; then +- ICE_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "ice" 2>&1` +- else +- ICE_PKG_ERRORS=`$PKG_CONFIG --print-errors "ice" 2>&1` +- fi +- # Put the nasty error message in config.log where it belongs +- echo "$ICE_PKG_ERRORS" >&5 +- +- { { $as_echo "$as_me:$LINENO: error: Package requirements (ice) were not met: +- +-$ICE_PKG_ERRORS +- +-Consider adjusting the PKG_CONFIG_PATH environment variable if you +-installed software in a non-standard prefix. +- +-Alternatively, you may set the environment variables ICE_CFLAGS +-and ICE_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details. +-" >&5 +-$as_echo "$as_me: error: Package requirements (ice) were not met: +- +-$ICE_PKG_ERRORS +- +-Consider adjusting the PKG_CONFIG_PATH environment variable if you +-installed software in a non-standard prefix. +- +-Alternatively, you may set the environment variables ICE_CFLAGS +-and ICE_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details. +-" >&2;} +- { (exit 1); exit 1; }; } +-elif test $pkg_failed = untried; then +- { { $as_echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it +-is in your PATH or set the PKG_CONFIG environment variable to the full +-path to pkg-config. +- +-Alternatively, you may set the environment variables ICE_CFLAGS +-and ICE_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details. +- +-To get pkg-config, see . +-See \`config.log' for more details." >&5 +-$as_echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it +-is in your PATH or set the PKG_CONFIG environment variable to the full +-path to pkg-config. +- +-Alternatively, you may set the environment variables ICE_CFLAGS +-and ICE_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details. +- +-To get pkg-config, see . +-See \`config.log' for more details." >&2;} +- { (exit 1); exit 1; }; } +-else +- ICE_CFLAGS=$pkg_cv_ICE_CFLAGS +- ICE_LIBS=$pkg_cv_ICE_LIBS +- { $as_echo "$as_me:$LINENO: result: yes" >&5 +-$as_echo "yes" >&6; } +- : +-fi +- +- +-pkg_failed=no +-{ $as_echo "$as_me:$LINENO: checking for DBUS_GLIB" >&5 +-$as_echo_n "checking for DBUS_GLIB... " >&6; } +- +-if test -n "$DBUS_GLIB_CFLAGS"; then +- pkg_cv_DBUS_GLIB_CFLAGS="$DBUS_GLIB_CFLAGS" +- elif test -n "$PKG_CONFIG"; then +- if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"dbus-glib-1 >= \$DBUS_GLIB_REQUIRED\"") >&5 +- ($PKG_CONFIG --exists --print-errors "dbus-glib-1 >= $DBUS_GLIB_REQUIRED") 2>&5 +- ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then +- pkg_cv_DBUS_GLIB_CFLAGS=`$PKG_CONFIG --cflags "dbus-glib-1 >= $DBUS_GLIB_REQUIRED" 2>/dev/null` +-else +- pkg_failed=yes +-fi +- else +- pkg_failed=untried +-fi +-if test -n "$DBUS_GLIB_LIBS"; then +- pkg_cv_DBUS_GLIB_LIBS="$DBUS_GLIB_LIBS" +- elif test -n "$PKG_CONFIG"; then +- if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"dbus-glib-1 >= \$DBUS_GLIB_REQUIRED\"") >&5 +- ($PKG_CONFIG --exists --print-errors "dbus-glib-1 >= $DBUS_GLIB_REQUIRED") 2>&5 +- ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then +- pkg_cv_DBUS_GLIB_LIBS=`$PKG_CONFIG --libs "dbus-glib-1 >= $DBUS_GLIB_REQUIRED" 2>/dev/null` +-else +- pkg_failed=yes +-fi +- else +- pkg_failed=untried +-fi +- +- +- +-if test $pkg_failed = yes; then +- +-if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then +- _pkg_short_errors_supported=yes +-else +- _pkg_short_errors_supported=no +-fi +- if test $_pkg_short_errors_supported = yes; then +- DBUS_GLIB_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "dbus-glib-1 >= $DBUS_GLIB_REQUIRED" 2>&1` +- else +- DBUS_GLIB_PKG_ERRORS=`$PKG_CONFIG --print-errors "dbus-glib-1 >= $DBUS_GLIB_REQUIRED" 2>&1` +- fi +- # Put the nasty error message in config.log where it belongs +- echo "$DBUS_GLIB_PKG_ERRORS" >&5 +- +- { { $as_echo "$as_me:$LINENO: error: Package requirements (dbus-glib-1 >= $DBUS_GLIB_REQUIRED) were not met: +- +-$DBUS_GLIB_PKG_ERRORS +- +-Consider adjusting the PKG_CONFIG_PATH environment variable if you +-installed software in a non-standard prefix. +- +-Alternatively, you may set the environment variables DBUS_GLIB_CFLAGS +-and DBUS_GLIB_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details. +-" >&5 +-$as_echo "$as_me: error: Package requirements (dbus-glib-1 >= $DBUS_GLIB_REQUIRED) were not met: +- +-$DBUS_GLIB_PKG_ERRORS +- +-Consider adjusting the PKG_CONFIG_PATH environment variable if you +-installed software in a non-standard prefix. +- +-Alternatively, you may set the environment variables DBUS_GLIB_CFLAGS +-and DBUS_GLIB_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details. +-" >&2;} +- { (exit 1); exit 1; }; } +-elif test $pkg_failed = untried; then +- { { $as_echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it +-is in your PATH or set the PKG_CONFIG environment variable to the full +-path to pkg-config. +- +-Alternatively, you may set the environment variables DBUS_GLIB_CFLAGS +-and DBUS_GLIB_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details. +- +-To get pkg-config, see . +-See \`config.log' for more details." >&5 +-$as_echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it +-is in your PATH or set the PKG_CONFIG environment variable to the full +-path to pkg-config. +- +-Alternatively, you may set the environment variables DBUS_GLIB_CFLAGS +-and DBUS_GLIB_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details. +- +-To get pkg-config, see . +-See \`config.log' for more details." >&2;} +- { (exit 1); exit 1; }; } +-else +- DBUS_GLIB_CFLAGS=$pkg_cv_DBUS_GLIB_CFLAGS +- DBUS_GLIB_LIBS=$pkg_cv_DBUS_GLIB_LIBS +- { $as_echo "$as_me:$LINENO: result: yes" >&5 +-$as_echo "yes" >&6; } +- : +-fi +- +-pkg_failed=no +-{ $as_echo "$as_me:$LINENO: checking for GCONF" >&5 +-$as_echo_n "checking for GCONF... " >&6; } +- +-if test -n "$GCONF_CFLAGS"; then +- pkg_cv_GCONF_CFLAGS="$GCONF_CFLAGS" +- elif test -n "$PKG_CONFIG"; then +- if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"gconf-2.0\"") >&5 +- ($PKG_CONFIG --exists --print-errors "gconf-2.0") 2>&5 +- ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then +- pkg_cv_GCONF_CFLAGS=`$PKG_CONFIG --cflags "gconf-2.0" 2>/dev/null` +-else +- pkg_failed=yes +-fi +- else +- pkg_failed=untried +-fi +-if test -n "$GCONF_LIBS"; then +- pkg_cv_GCONF_LIBS="$GCONF_LIBS" +- elif test -n "$PKG_CONFIG"; then +- if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"gconf-2.0\"") >&5 +- ($PKG_CONFIG --exists --print-errors "gconf-2.0") 2>&5 +- ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then +- pkg_cv_GCONF_LIBS=`$PKG_CONFIG --libs "gconf-2.0" 2>/dev/null` +-else +- pkg_failed=yes +-fi +- else +- pkg_failed=untried +-fi +- +- +- +-if test $pkg_failed = yes; then +- +-if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then +- _pkg_short_errors_supported=yes +-else +- _pkg_short_errors_supported=no +-fi +- if test $_pkg_short_errors_supported = yes; then +- GCONF_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "gconf-2.0" 2>&1` +- else +- GCONF_PKG_ERRORS=`$PKG_CONFIG --print-errors "gconf-2.0" 2>&1` +- fi +- # Put the nasty error message in config.log where it belongs +- echo "$GCONF_PKG_ERRORS" >&5 +- +- { { $as_echo "$as_me:$LINENO: error: Package requirements (gconf-2.0) were not met: +- +-$GCONF_PKG_ERRORS +- +-Consider adjusting the PKG_CONFIG_PATH environment variable if you +-installed software in a non-standard prefix. +- +-Alternatively, you may set the environment variables GCONF_CFLAGS +-and GCONF_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details. +-" >&5 +-$as_echo "$as_me: error: Package requirements (gconf-2.0) were not met: +- +-$GCONF_PKG_ERRORS +- +-Consider adjusting the PKG_CONFIG_PATH environment variable if you +-installed software in a non-standard prefix. +- +-Alternatively, you may set the environment variables GCONF_CFLAGS +-and GCONF_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details. +-" >&2;} +- { (exit 1); exit 1; }; } +-elif test $pkg_failed = untried; then +- { { $as_echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it +-is in your PATH or set the PKG_CONFIG environment variable to the full +-path to pkg-config. +- +-Alternatively, you may set the environment variables GCONF_CFLAGS +-and GCONF_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details. +- +-To get pkg-config, see . +-See \`config.log' for more details." >&5 +-$as_echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it +-is in your PATH or set the PKG_CONFIG environment variable to the full +-path to pkg-config. +- +-Alternatively, you may set the environment variables GCONF_CFLAGS +-and GCONF_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details. +- +-To get pkg-config, see . +-See \`config.log' for more details." >&2;} +- { (exit 1); exit 1; }; } +-else +- GCONF_CFLAGS=$pkg_cv_GCONF_CFLAGS +- GCONF_LIBS=$pkg_cv_GCONF_LIBS +- { $as_echo "$as_me:$LINENO: result: yes" >&5 +-$as_echo "yes" >&6; } +- : +-fi +- +- +-pkg_failed=no +-{ $as_echo "$as_me:$LINENO: checking for EGG_SMCLIENT" >&5 +-$as_echo_n "checking for EGG_SMCLIENT... " >&6; } +- +-if test -n "$EGG_SMCLIENT_CFLAGS"; then +- pkg_cv_EGG_SMCLIENT_CFLAGS="$EGG_SMCLIENT_CFLAGS" +- elif test -n "$PKG_CONFIG"; then +- if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"gtk+-2.0\"") >&5 +- ($PKG_CONFIG --exists --print-errors "gtk+-2.0") 2>&5 +- ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then +- pkg_cv_EGG_SMCLIENT_CFLAGS=`$PKG_CONFIG --cflags "gtk+-2.0" 2>/dev/null` +-else +- pkg_failed=yes +-fi +- else +- pkg_failed=untried +-fi +-if test -n "$EGG_SMCLIENT_LIBS"; then +- pkg_cv_EGG_SMCLIENT_LIBS="$EGG_SMCLIENT_LIBS" +- elif test -n "$PKG_CONFIG"; then +- if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"gtk+-2.0\"") >&5 +- ($PKG_CONFIG --exists --print-errors "gtk+-2.0") 2>&5 +- ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then +- pkg_cv_EGG_SMCLIENT_LIBS=`$PKG_CONFIG --libs "gtk+-2.0" 2>/dev/null` +-else +- pkg_failed=yes +-fi +- else +- pkg_failed=untried +-fi +- +- +- +-if test $pkg_failed = yes; then +- +-if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then +- _pkg_short_errors_supported=yes +-else +- _pkg_short_errors_supported=no +-fi +- if test $_pkg_short_errors_supported = yes; then +- EGG_SMCLIENT_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "gtk+-2.0" 2>&1` +- else +- EGG_SMCLIENT_PKG_ERRORS=`$PKG_CONFIG --print-errors "gtk+-2.0" 2>&1` +- fi +- # Put the nasty error message in config.log where it belongs +- echo "$EGG_SMCLIENT_PKG_ERRORS" >&5 +- +- { { $as_echo "$as_me:$LINENO: error: Package requirements (gtk+-2.0) were not met: +- +-$EGG_SMCLIENT_PKG_ERRORS +- +-Consider adjusting the PKG_CONFIG_PATH environment variable if you +-installed software in a non-standard prefix. +- +-Alternatively, you may set the environment variables EGG_SMCLIENT_CFLAGS +-and EGG_SMCLIENT_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details. +-" >&5 +-$as_echo "$as_me: error: Package requirements (gtk+-2.0) were not met: +- +-$EGG_SMCLIENT_PKG_ERRORS +- +-Consider adjusting the PKG_CONFIG_PATH environment variable if you +-installed software in a non-standard prefix. +- +-Alternatively, you may set the environment variables EGG_SMCLIENT_CFLAGS +-and EGG_SMCLIENT_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details. +-" >&2;} +- { (exit 1); exit 1; }; } +-elif test $pkg_failed = untried; then +- { { $as_echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it +-is in your PATH or set the PKG_CONFIG environment variable to the full +-path to pkg-config. +- +-Alternatively, you may set the environment variables EGG_SMCLIENT_CFLAGS +-and EGG_SMCLIENT_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details. +- +-To get pkg-config, see . +-See \`config.log' for more details." >&5 +-$as_echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it +-is in your PATH or set the PKG_CONFIG environment variable to the full +-path to pkg-config. +- +-Alternatively, you may set the environment variables EGG_SMCLIENT_CFLAGS +-and EGG_SMCLIENT_LIBS to avoid the need to call pkg-config. +-See the pkg-config man page for more details. +- +-To get pkg-config, see . +-See \`config.log' for more details." >&2;} +- { (exit 1); exit 1; }; } +-else +- EGG_SMCLIENT_CFLAGS=$pkg_cv_EGG_SMCLIENT_CFLAGS +- EGG_SMCLIENT_LIBS=$pkg_cv_EGG_SMCLIENT_LIBS +- { $as_echo "$as_me:$LINENO: result: yes" >&5 +-$as_echo "yes" >&6; } +- : +-fi ++/* System header to define __stub macros and hopefully few prototypes, ++ which can conflict with char remove (); below. ++ Prefer to if __STDC__ is defined, since ++ exists even on freestanding compilers. */ + +-have_polkit=no +-# Check whether --enable-polkit was given. +-if test "${enable_polkit+set}" = set; then +- enableval=$enable_polkit; enable_polkit=$enableval +-else +- enable_polkit=auto +-fi ++#ifdef __STDC__ ++# include ++#else ++# include ++#endif + +-if test "x$enable_polkit" != "xno"; then ++#undef remove + +-pkg_failed=no +-{ $as_echo "$as_me:$LINENO: checking for POLKIT_GNOME" >&5 +-$as_echo_n "checking for POLKIT_GNOME... " >&6; } ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char remove (); ++/* The GNU C library defines this for functions which it implements ++ to always fail with ENOSYS. Some functions are actually named ++ something starting with __ and the normal name is an alias. */ ++#if defined __stub_remove || defined __stub___remove ++choke me ++#endif + +-if test -n "$POLKIT_GNOME_CFLAGS"; then +- pkg_cv_POLKIT_GNOME_CFLAGS="$POLKIT_GNOME_CFLAGS" +- elif test -n "$PKG_CONFIG"; then +- if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"polkit-gnome >= \$POLKIT_GNOME_REQUIRED\"") >&5 +- ($PKG_CONFIG --exists --print-errors "polkit-gnome >= $POLKIT_GNOME_REQUIRED") 2>&5 +- ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then +- pkg_cv_POLKIT_GNOME_CFLAGS=`$PKG_CONFIG --cflags "polkit-gnome >= $POLKIT_GNOME_REQUIRED" 2>/dev/null` +-else +- pkg_failed=yes +-fi +- else +- pkg_failed=untried +-fi +-if test -n "$POLKIT_GNOME_LIBS"; then +- pkg_cv_POLKIT_GNOME_LIBS="$POLKIT_GNOME_LIBS" +- elif test -n "$PKG_CONFIG"; then +- if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"polkit-gnome >= \$POLKIT_GNOME_REQUIRED\"") >&5 +- ($PKG_CONFIG --exists --print-errors "polkit-gnome >= $POLKIT_GNOME_REQUIRED") 2>&5 ++int ++main () ++{ ++return remove (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then +- pkg_cv_POLKIT_GNOME_LIBS=`$PKG_CONFIG --libs "polkit-gnome >= $POLKIT_GNOME_REQUIRED" 2>/dev/null` +-else +- pkg_failed=yes +-fi +- else +- pkg_failed=untried +-fi +- +- +- +-if test $pkg_failed = yes; then +- +-if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then +- _pkg_short_errors_supported=yes ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_func_remove=yes + else +- _pkg_short_errors_supported=no +-fi +- if test $_pkg_short_errors_supported = yes; then +- POLKIT_GNOME_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "polkit-gnome >= $POLKIT_GNOME_REQUIRED" 2>&1` +- else +- POLKIT_GNOME_PKG_ERRORS=`$PKG_CONFIG --print-errors "polkit-gnome >= $POLKIT_GNOME_REQUIRED" 2>&1` +- fi +- # Put the nasty error message in config.log where it belongs +- echo "$POLKIT_GNOME_PKG_ERRORS" >&5 ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 + +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } +- have_polkit=no +-elif test $pkg_failed = untried; then +- have_polkit=no +-else +- POLKIT_GNOME_CFLAGS=$pkg_cv_POLKIT_GNOME_CFLAGS +- POLKIT_GNOME_LIBS=$pkg_cv_POLKIT_GNOME_LIBS +- { $as_echo "$as_me:$LINENO: result: yes" >&5 +-$as_echo "yes" >&6; } +- have_polkit=yes +-fi +- if test "x$enable_polkit" = "xyes" -a "x$have_polkit" = "xno"; then +- { { $as_echo "$as_me:$LINENO: error: PolicyKit support explicitly requested but dependencies not found" >&5 +-$as_echo "$as_me: error: PolicyKit support explicitly requested but dependencies not found" >&2;} +- { (exit 1); exit 1; }; } +- fi ++ ac_cv_func_remove=no + fi + +-if test "x$have_polkit" = "xyes"; then +- +-cat >>confdefs.h <<\_ACEOF +-#define HAVE_POLKIT_GNOME 1 +-_ACEOF +- ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext + fi ++{ echo "$as_me:$LINENO: result: $ac_cv_func_remove" >&5 ++echo "${ECHO_T}$ac_cv_func_remove" >&6; } + +-# Extract the first word of "gconftool-2", so it can be a program name with args. +-set dummy gconftool-2; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } +-if test "${ac_cv_path_GCONFTOOL+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ if test $ac_cv_func_remove = no; then ++ { echo "$as_me:$LINENO: checking for remove in -lposix" >&5 ++echo $ECHO_N "checking for remove in -lposix... $ECHO_C" >&6; } ++if test "${ac_cv_lib_posix_remove+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- case $GCONFTOOL in +- [\\/]* | ?:[\\/]*) +- ac_cv_path_GCONFTOOL="$GCONFTOOL" # Let the user override the test with a path. +- ;; +- *) +- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +-for as_dir in $PATH +-do +- IFS=$as_save_IFS +- test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do +- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then +- ac_cv_path_GCONFTOOL="$as_dir/$ac_word$ac_exec_ext" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 +- break 2 +- fi +-done +-done +-IFS=$as_save_IFS ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-lposix $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ + +- test -z "$ac_cv_path_GCONFTOOL" && ac_cv_path_GCONFTOOL="no" +- ;; ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char remove (); ++int ++main () ++{ ++return remove (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; + esac +-fi +-GCONFTOOL=$ac_cv_path_GCONFTOOL +-if test -n "$GCONFTOOL"; then +- { $as_echo "$as_me:$LINENO: result: $GCONFTOOL" >&5 +-$as_echo "$GCONFTOOL" >&6; } ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_posix_remove=yes + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } +-fi +- ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 + +-if test x"$GCONFTOOL" = xno; then +- { { $as_echo "$as_me:$LINENO: error: gconftool-2 executable not found in your path - should be installed with GConf" >&5 +-$as_echo "$as_me: error: gconftool-2 executable not found in your path - should be installed with GConf" >&2;} +- { (exit 1); exit 1; }; } ++ ac_cv_lib_posix_remove=no + fi + +- +- if test "x$GCONF_SCHEMA_INSTALL_SOURCE" = "x"; then +- GCONF_SCHEMA_CONFIG_SOURCE=`gconftool-2 --get-default-source` +- else +- GCONF_SCHEMA_CONFIG_SOURCE=$GCONF_SCHEMA_INSTALL_SOURCE +- fi +- +- +-# Check whether --with-gconf-source was given. +-if test "${with_gconf_source+set}" = set; then +- withval=$with_gconf_source; GCONF_SCHEMA_CONFIG_SOURCE="$withval" ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS + fi +- +- +- +- { $as_echo "$as_me:$LINENO: result: Using config source $GCONF_SCHEMA_CONFIG_SOURCE for schema installation" >&5 +-$as_echo "Using config source $GCONF_SCHEMA_CONFIG_SOURCE for schema installation" >&6; } +- +- if test "x$GCONF_SCHEMA_FILE_DIR" = "x"; then +- GCONF_SCHEMA_FILE_DIR='$(sysconfdir)/gconf/schemas' +- fi +- +- +-# Check whether --with-gconf-schema-file-dir was given. +-if test "${with_gconf_schema_file_dir+set}" = set; then +- withval=$with_gconf_schema_file_dir; GCONF_SCHEMA_FILE_DIR="$withval" ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_posix_remove" >&5 ++echo "${ECHO_T}$ac_cv_lib_posix_remove" >&6; } ++if test $ac_cv_lib_posix_remove = yes; then ++ X_EXTRA_LIBS="$X_EXTRA_LIBS -lposix" + fi + ++ fi ++ ++ # BSDI BSD/OS 2.1 needs -lipc for XOpenDisplay. ++ { echo "$as_me:$LINENO: checking for shmat" >&5 ++echo $ECHO_N "checking for shmat... $ECHO_C" >&6; } ++if test "${ac_cv_func_shmat+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++/* Define shmat to an innocuous variant, in case declares shmat. ++ For example, HP-UX 11i declares gettimeofday. */ ++#define shmat innocuous_shmat + ++/* System header to define __stub macros and hopefully few prototypes, ++ which can conflict with char shmat (); below. ++ Prefer to if __STDC__ is defined, since ++ exists even on freestanding compilers. */ + +- { $as_echo "$as_me:$LINENO: result: Using $GCONF_SCHEMA_FILE_DIR as install directory for schema files" >&5 +-$as_echo "Using $GCONF_SCHEMA_FILE_DIR as install directory for schema files" >&6; } ++#ifdef __STDC__ ++# include ++#else ++# include ++#endif + +- # Check whether --enable-schemas-install was given. +-if test "${enable_schemas_install+set}" = set; then +- enableval=$enable_schemas_install; case ${enableval} in +- yes|no) ;; +- *) { { $as_echo "$as_me:$LINENO: error: bad value ${enableval} for --enable-schemas-install" >&5 +-$as_echo "$as_me: error: bad value ${enableval} for --enable-schemas-install" >&2;} +- { (exit 1); exit 1; }; } ;; +- esac +-fi ++#undef shmat + +- if test "$enable_schemas_install" != no; then +- GCONF_SCHEMAS_INSTALL_TRUE= +- GCONF_SCHEMAS_INSTALL_FALSE='#' +-else +- GCONF_SCHEMAS_INSTALL_TRUE='#' +- GCONF_SCHEMAS_INSTALL_FALSE= +-fi ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char shmat (); ++/* The GNU C library defines this for functions which it implements ++ to always fail with ENOSYS. Some functions are actually named ++ something starting with __ and the normal name is an alias. */ ++#if defined __stub_shmat || defined __stub___shmat ++choke me ++#endif + ++int ++main () ++{ ++return shmat (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_func_shmat=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 + ++ ac_cv_func_shmat=no ++fi + +-GCONF_SERVERDIR=`$PKG_CONFIG --variable=gconf_serverdir gconf-2.0` +-old_path=$PATH +-if test x"$GCONF_SERVERDIR" != x; then +- PATH=$GCONF_SERVERDIR:$PATH ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext + fi ++{ echo "$as_me:$LINENO: result: $ac_cv_func_shmat" >&5 ++echo "${ECHO_T}$ac_cv_func_shmat" >&6; } + +-# Extract the first word of "gconf-sanity-check-2", so it can be a program name with args. +-set dummy gconf-sanity-check-2; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } +-if test "${ac_cv_path_GCONF_SANITY_CHECK+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ if test $ac_cv_func_shmat = no; then ++ { echo "$as_me:$LINENO: checking for shmat in -lipc" >&5 ++echo $ECHO_N "checking for shmat in -lipc... $ECHO_C" >&6; } ++if test "${ac_cv_lib_ipc_shmat+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- case $GCONF_SANITY_CHECK in +- [\\/]* | ?:[\\/]*) +- ac_cv_path_GCONF_SANITY_CHECK="$GCONF_SANITY_CHECK" # Let the user override the test with a path. +- ;; +- *) +- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +-for as_dir in $PATH +-do +- IFS=$as_save_IFS +- test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do +- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then +- ac_cv_path_GCONF_SANITY_CHECK="$as_dir/$ac_word$ac_exec_ext" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 +- break 2 +- fi +-done +-done +-IFS=$as_save_IFS ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-lipc $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ + +- test -z "$ac_cv_path_GCONF_SANITY_CHECK" && ac_cv_path_GCONF_SANITY_CHECK="no" +- ;; ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char shmat (); ++int ++main () ++{ ++return shmat (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; + esac +-fi +-GCONF_SANITY_CHECK=$ac_cv_path_GCONF_SANITY_CHECK +-if test -n "$GCONF_SANITY_CHECK"; then +- { $as_echo "$as_me:$LINENO: result: $GCONF_SANITY_CHECK" >&5 +-$as_echo "$GCONF_SANITY_CHECK" >&6; } ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_ipc_shmat=yes + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } +-fi +- ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 + +-if test x"$GCONF_SANITY_CHECK" = xno; then +- { { $as_echo "$as_me:$LINENO: error: gconf-sanity-check-2 executable not found in your path - should be installed with GConf" >&5 +-$as_echo "$as_me: error: gconf-sanity-check-2 executable not found in your path - should be installed with GConf" >&2;} +- { (exit 1); exit 1; }; } ++ ac_cv_lib_ipc_shmat=no + fi + ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_ipc_shmat" >&5 ++echo "${ECHO_T}$ac_cv_lib_ipc_shmat" >&6; } ++if test $ac_cv_lib_ipc_shmat = yes; then ++ X_EXTRA_LIBS="$X_EXTRA_LIBS -lipc" ++fi + +-PATH=$old_path +- +- +-# If Pango included the shared library dependencies from X11 in +-# the pkg-config output, then we use that (to avoid duplicates). +-# but if they were omitted to avoid binary compatibility problems +-# then we need to repeat the checks. ++ fi ++ fi + +-if $PKG_CONFIG --exists pangoxft ; then +- PANGO_PACKAGES="pangox pangoxft" ++ # Check for libraries that X11R6 Xt/Xaw programs need. ++ ac_save_LDFLAGS=$LDFLAGS ++ test -n "$x_libraries" && LDFLAGS="$LDFLAGS -L$x_libraries" ++ # SM needs ICE to (dynamically) link under SunOS 4.x (so we have to ++ # check for ICE first), but we must link in the order -lSM -lICE or ++ # we get undefined symbols. So assume we have SM if we have ICE. ++ # These have to be linked with before -lX11, unlike the other ++ # libraries we check for below, so use a different variable. ++ # John Interrante, Karl Berry ++ { echo "$as_me:$LINENO: checking for IceConnectionNumber in -lICE" >&5 ++echo $ECHO_N "checking for IceConnectionNumber in -lICE... $ECHO_C" >&6; } ++if test "${ac_cv_lib_ICE_IceConnectionNumber+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- PANGO_PACKAGES="pangox" +-fi ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-lICE $X_EXTRA_LIBS $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ + +-x_libs="`$PKG_CONFIG --libs $PANGO_PACKAGES`" +-case x_libs in +- *-lX11*) pango_omitted_x_deps=no ;; +- *) pango_omitted_x_deps=yes ;; ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char IceConnectionNumber (); ++int ++main () ++{ ++return IceConnectionNumber (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; + esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_ICE_IceConnectionNumber=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 + +-if test $pango_omitted_x_deps = yes ; then +- { $as_echo "$as_me:$LINENO: checking for X" >&5 +-$as_echo_n "checking for X... " >&6; } +- +- +-# Check whether --with-x was given. +-if test "${with_x+set}" = set; then +- withval=$with_x; ++ ac_cv_lib_ICE_IceConnectionNumber=no + fi + +-# $have_x is `yes', `no', `disabled', or empty when we do not yet know. +-if test "x$with_x" = xno; then +- # The user explicitly disabled X. +- have_x=disabled +-else +- case $x_includes,$x_libraries in #( +- *\'*) { { $as_echo "$as_me:$LINENO: error: Cannot use X directory names containing '" >&5 +-$as_echo "$as_me: error: Cannot use X directory names containing '" >&2;} +- { (exit 1); exit 1; }; };; #( +- *,NONE | NONE,*) if test "${ac_cv_have_x+set}" = set; then +- $as_echo_n "(cached) " >&6 +-else +- # One or both of the vars are not set, and there is no cached value. +-ac_x_includes=no ac_x_libraries=no +-rm -f -r conftest.dir +-if mkdir conftest.dir; then +- cd conftest.dir +- cat >Imakefile <<'_ACEOF' +-incroot: +- @echo incroot='${INCROOT}' +-usrlibdir: +- @echo usrlibdir='${USRLIBDIR}' +-libdir: +- @echo libdir='${LIBDIR}' +-_ACEOF +- if (export CC; ${XMKMF-xmkmf}) >/dev/null 2>/dev/null && test -f Makefile; then +- # GNU make sometimes prints "make[1]: Entering...", which would confuse us. +- for ac_var in incroot usrlibdir libdir; do +- eval "ac_im_$ac_var=\`\${MAKE-make} $ac_var 2>/dev/null | sed -n 's/^$ac_var=//p'\`" +- done +- # Open Windows xmkmf reportedly sets LIBDIR instead of USRLIBDIR. +- for ac_extension in a so sl dylib la dll; do +- if test ! -f "$ac_im_usrlibdir/libX11.$ac_extension" && +- test -f "$ac_im_libdir/libX11.$ac_extension"; then +- ac_im_usrlibdir=$ac_im_libdir; break +- fi +- done +- # Screen out bogus values from the imake configuration. They are +- # bogus both because they are the default anyway, and because +- # using them would break gcc on systems where it needs fixed includes. +- case $ac_im_incroot in +- /usr/include) ac_x_includes= ;; +- *) test -f "$ac_im_incroot/X11/Xos.h" && ac_x_includes=$ac_im_incroot;; +- esac +- case $ac_im_usrlibdir in +- /usr/lib | /lib) ;; +- *) test -d "$ac_im_usrlibdir" && ac_x_libraries=$ac_im_usrlibdir ;; +- esac +- fi +- cd .. +- rm -f -r conftest.dir ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_ICE_IceConnectionNumber" >&5 ++echo "${ECHO_T}$ac_cv_lib_ICE_IceConnectionNumber" >&6; } ++if test $ac_cv_lib_ICE_IceConnectionNumber = yes; then ++ X_PRE_LIBS="$X_PRE_LIBS -lSM -lICE" + fi + +-# Standard set of common directories for X headers. +-# Check X11 before X11Rn because it is often a symlink to the current release. +-ac_x_header_dirs=' +-/usr/X11/include +-/usr/X11R6/include +-/usr/X11R5/include +-/usr/X11R4/include +- +-/usr/include/X11 +-/usr/include/X11R6 +-/usr/include/X11R5 +-/usr/include/X11R4 +- +-/usr/local/X11/include +-/usr/local/X11R6/include +-/usr/local/X11R5/include +-/usr/local/X11R4/include +- +-/usr/local/include/X11 +-/usr/local/include/X11R6 +-/usr/local/include/X11R5 +-/usr/local/include/X11R4 ++ LDFLAGS=$ac_save_LDFLAGS + +-/usr/X386/include +-/usr/x386/include +-/usr/XFree86/include/X11 ++fi + +-/usr/include +-/usr/local/include +-/usr/unsupported/include +-/usr/athena/include +-/usr/local/x11r5/include +-/usr/lpp/Xamples/include + +-/usr/openwin/include +-/usr/openwin/share/include' ++ if test x$no_x = xyes ; then ++ { { echo "$as_me:$LINENO: error: X development libraries not found" >&5 ++echo "$as_me: error: X development libraries not found" >&2;} ++ { (exit 1); exit 1; }; } ++ else ++ X_LIBS="$X_PRE_LIBS $X_LIBS -lX11 $X_EXTRA_LIBS" ++ fi ++fi + +-if test "$ac_x_includes" = no; then +- # Guess where to find include files, by looking for Xlib.h. +- # First, try using that file with no special directory specified. +- cat >conftest.$ac_ext <<_ACEOF ++{ echo "$as_me:$LINENO: checking for XauFileName in -lXau" >&5 ++echo $ECHO_N "checking for XauFileName in -lXau... $ECHO_C" >&6; } ++if test "${ac_cv_lib_Xau_XauFileName+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-lXau $X_LIBS $LIBS" ++cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ +-#include ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char XauFileName (); ++int ++main () ++{ ++return XauFileName (); ++ ; ++ return 0; ++} + _ACEOF +-if { (ac_try="$ac_cpp conftest.$ac_ext" ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" + case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } >/dev/null && { +- test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || + test ! -s conftest.err +- }; then +- # We can compile using X headers with no special include directory. +-ac_x_includes= ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_Xau_XauFileName=yes + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +- for ac_dir in $ac_x_header_dirs; do +- if test -r "$ac_dir/X11/Xlib.h"; then +- ac_x_includes=$ac_dir +- break +- fi +-done ++ ac_cv_lib_Xau_XauFileName=no + fi + +-rm -f conftest.err conftest.$ac_ext +-fi # $ac_x_includes = no ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_Xau_XauFileName" >&5 ++echo "${ECHO_T}$ac_cv_lib_Xau_XauFileName" >&6; } ++if test $ac_cv_lib_Xau_XauFileName = yes; then ++ X_LIBS="$X_LIBS -lXau" ++else ++ { { echo "$as_me:$LINENO: error: ++*** Can't find the Xauth library. It is needed to compile gnome-session." >&5 ++echo "$as_me: error: ++*** Can't find the Xauth library. It is needed to compile gnome-session." >&2;} ++ { (exit 1); exit 1; }; } ++fi + +-if test "$ac_x_libraries" = no; then +- # Check for the libraries. +- # See if we find them without any special options. +- # Don't add to $LIBS permanently. +- ac_save_LIBS=$LIBS +- LIBS="-lX11 $LIBS" ++ ++ ++ ++ ++have_xsync=no ++{ echo "$as_me:$LINENO: checking for X11/extensions/sync.h" >&5 ++echo $ECHO_N "checking for X11/extensions/sync.h... $ECHO_C" >&6; } ++if test "${ac_cv_header_X11_extensions_sync_h+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -23609,437 +15655,507 @@ + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + #include +-int +-main () +-{ +-XrmInitialize () +- ; +- return 0; +-} ++ ++#include + _ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" ++rm -f conftest.$ac_objext ++if { (ac_try="$ac_compile" + case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_link") 2>conftest.er1 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then +- LIBS=$ac_save_LIBS +-# We can link X programs with no special library path. +-ac_x_libraries= ++ } && test -s conftest.$ac_objext; then ++ ac_cv_header_X11_extensions_sync_h=yes + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +- LIBS=$ac_save_LIBS +-for ac_dir in `$as_echo "$ac_x_includes $ac_x_header_dirs" | sed s/include/lib/g` +-do +- # Don't even attempt the hair of trying to link an X program! +- for ac_extension in a so sl dylib la dll; do +- if test -r "$ac_dir/libX11.$ac_extension"; then +- ac_x_libraries=$ac_dir +- break 2 ++ ac_cv_header_X11_extensions_sync_h=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_header_X11_extensions_sync_h" >&5 ++echo "${ECHO_T}$ac_cv_header_X11_extensions_sync_h" >&6; } ++if test $ac_cv_header_X11_extensions_sync_h = yes; then ++ have_xsync=yes ++fi ++ ++ ++if test "$have_xsync" = yes; then ++ ++cat >>confdefs.h <<\_ACEOF ++#define HAVE_XSYNC 1 ++_ACEOF ++ ++fi ++ ++ ++have_xtest=no ++ ++pkg_failed=no ++{ echo "$as_me:$LINENO: checking for XTEST" >&5 ++echo $ECHO_N "checking for XTEST... $ECHO_C" >&6; } ++ ++if test -n "$PKG_CONFIG"; then ++ if test -n "$XTEST_CFLAGS"; then ++ pkg_cv_XTEST_CFLAGS="$XTEST_CFLAGS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"xtst\"") >&5 ++ ($PKG_CONFIG --exists --print-errors "xtst") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_XTEST_CFLAGS=`$PKG_CONFIG --cflags "xtst" 2>/dev/null` ++else ++ pkg_failed=yes ++fi + fi +- done +-done ++else ++ pkg_failed=untried ++fi ++if test -n "$PKG_CONFIG"; then ++ if test -n "$XTEST_LIBS"; then ++ pkg_cv_XTEST_LIBS="$XTEST_LIBS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"xtst\"") >&5 ++ ($PKG_CONFIG --exists --print-errors "xtst") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_XTEST_LIBS=`$PKG_CONFIG --libs "xtst" 2>/dev/null` ++else ++ pkg_failed=yes ++fi ++ fi ++else ++ pkg_failed=untried + fi + +-rm -rf conftest.dSYM +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext +-fi # $ac_x_libraries = no + +-case $ac_x_includes,$ac_x_libraries in #( +- no,* | *,no | *\'*) +- # Didn't find X, or a directory has "'" in its name. +- ac_cv_have_x="have_x=no";; #( +- *) +- # Record where we found X for the cache. +- ac_cv_have_x="have_x=yes\ +- ac_x_includes='$ac_x_includes'\ +- ac_x_libraries='$ac_x_libraries'" +-esac ++ ++if test $pkg_failed = yes; then ++ ++if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then ++ _pkg_short_errors_supported=yes ++else ++ _pkg_short_errors_supported=no + fi +-;; #( +- *) have_x=yes;; +- esac +- eval "$ac_cv_have_x" +-fi # $with_x != no ++ if test $_pkg_short_errors_supported = yes; then ++ XTEST_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "xtst"` ++ else ++ XTEST_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "xtst"` ++ fi ++ # Put the nasty error message in config.log where it belongs ++ echo "$XTEST_PKG_ERRORS" >&5 ++ ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++ have_xtest=no ++elif test $pkg_failed = untried; then ++ have_xtest=no ++else ++ XTEST_CFLAGS=$pkg_cv_XTEST_CFLAGS ++ XTEST_LIBS=$pkg_cv_XTEST_LIBS ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++ have_xtest=yes ++fi ++if test "$have_xtest" = yes; then ++ ++cat >>confdefs.h <<\_ACEOF ++#define HAVE_XTEST 1 ++_ACEOF ++ ++fi ++ ++ ++ ++ ++ ++ ++pkg_failed=no ++{ echo "$as_me:$LINENO: checking for XRENDER" >&5 ++echo $ECHO_N "checking for XRENDER... $ECHO_C" >&6; } ++ ++if test -n "$PKG_CONFIG"; then ++ if test -n "$XRENDER_CFLAGS"; then ++ pkg_cv_XRENDER_CFLAGS="$XRENDER_CFLAGS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"xrender\"") >&5 ++ ($PKG_CONFIG --exists --print-errors "xrender") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_XRENDER_CFLAGS=`$PKG_CONFIG --cflags "xrender" 2>/dev/null` ++else ++ pkg_failed=yes ++fi ++ fi ++else ++ pkg_failed=untried ++fi ++if test -n "$PKG_CONFIG"; then ++ if test -n "$XRENDER_LIBS"; then ++ pkg_cv_XRENDER_LIBS="$XRENDER_LIBS" ++ else ++ if test -n "$PKG_CONFIG" && \ ++ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"xrender\"") >&5 ++ ($PKG_CONFIG --exists --print-errors "xrender") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ pkg_cv_XRENDER_LIBS=`$PKG_CONFIG --libs "xrender" 2>/dev/null` ++else ++ pkg_failed=yes ++fi ++ fi ++else ++ pkg_failed=untried ++fi ++ ++ ++ ++if test $pkg_failed = yes; then ++ ++if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then ++ _pkg_short_errors_supported=yes ++else ++ _pkg_short_errors_supported=no ++fi ++ if test $_pkg_short_errors_supported = yes; then ++ XRENDER_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "xrender"` ++ else ++ XRENDER_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "xrender"` ++ fi ++ # Put the nasty error message in config.log where it belongs ++ echo "$XRENDER_PKG_ERRORS" >&5 + +-if test "$have_x" != yes; then +- { $as_echo "$as_me:$LINENO: result: $have_x" >&5 +-$as_echo "$have_x" >&6; } +- no_x=yes ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++ have_xrender=no ++elif test $pkg_failed = untried; then ++ have_xrender=no + else +- # If each of the values was on the command line, it overrides each guess. +- test "x$x_includes" = xNONE && x_includes=$ac_x_includes +- test "x$x_libraries" = xNONE && x_libraries=$ac_x_libraries +- # Update the cache value to reflect the command line values. +- ac_cv_have_x="have_x=yes\ +- ac_x_includes='$x_includes'\ +- ac_x_libraries='$x_libraries'" +- { $as_echo "$as_me:$LINENO: result: libraries $x_libraries, headers $x_includes" >&5 +-$as_echo "libraries $x_libraries, headers $x_includes" >&6; } ++ XRENDER_CFLAGS=$pkg_cv_XRENDER_CFLAGS ++ XRENDER_LIBS=$pkg_cv_XRENDER_LIBS ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++ have_xrender=yes ++fi ++ if test x$have_xrender = xyes; then ++ HAVE_XRENDER_TRUE= ++ HAVE_XRENDER_FALSE='#' ++else ++ HAVE_XRENDER_TRUE='#' ++ HAVE_XRENDER_FALSE= + fi + +-if test "$no_x" = yes; then +- # Not all programs may use this symbol, but it does not hurt to define it. ++if test $have_xrender=yes; then + + cat >>confdefs.h <<\_ACEOF +-#define X_DISPLAY_MISSING 1 ++#define HAVE_XRENDER 1 + _ACEOF + +- X_CFLAGS= X_PRE_LIBS= X_LIBS= X_EXTRA_LIBS= +-else +- if test -n "$x_includes"; then +- X_CFLAGS="$X_CFLAGS -I$x_includes" +- fi ++fi + +- # It would also be nice to do this for all -L options, not just this one. +- if test -n "$x_libraries"; then +- X_LIBS="$X_LIBS -L$x_libraries" +- # For Solaris; some versions of Sun CC require a space after -R and +- # others require no space. Words are not sufficient . . . . +- { $as_echo "$as_me:$LINENO: checking whether -R must be followed by a space" >&5 +-$as_echo_n "checking whether -R must be followed by a space... " >&6; } +- ac_xsave_LIBS=$LIBS; LIBS="$LIBS -R$x_libraries" +- ac_xsave_c_werror_flag=$ac_c_werror_flag +- ac_c_werror_flag=yes +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ + +-int +-main () +-{ + +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } +- X_LIBS="$X_LIBS -R$x_libraries" +-else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 + +- LIBS="$ac_xsave_LIBS -R $x_libraries" +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ + +-int +-main () +-{ ++# Check whether --enable-docbook-docs was given. ++if test "${enable_docbook_docs+set}" = set; then ++ enableval=$enable_docbook_docs; enable_docbook_docs=$enableval ++else ++ enable_docbook_docs=auto ++fi + +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then +- { $as_echo "$as_me:$LINENO: result: yes" >&5 +-$as_echo "yes" >&6; } +- X_LIBS="$X_LIBS -R $x_libraries" ++# Extract the first word of "xmlto", so it can be a program name with args. ++set dummy xmlto; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_path_XMLTO+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++ case $XMLTO in ++ [\\/]* | ?:[\\/]*) ++ ac_cv_path_XMLTO="$XMLTO" # Let the user override the test with a path. ++ ;; ++ *) ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_path_XMLTO="$as_dir/$ac_word$ac_exec_ext" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS + +- { $as_echo "$as_me:$LINENO: result: neither works" >&5 +-$as_echo "neither works" >&6; } ++ test -z "$ac_cv_path_XMLTO" && ac_cv_path_XMLTO="no" ++ ;; ++esac + fi +- +-rm -rf conftest.dSYM +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext ++XMLTO=$ac_cv_path_XMLTO ++if test -n "$XMLTO"; then ++ { echo "$as_me:$LINENO: result: $XMLTO" >&5 ++echo "${ECHO_T}$XMLTO" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + +-rm -rf conftest.dSYM +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext +- ac_c_werror_flag=$ac_xsave_c_werror_flag +- LIBS=$ac_xsave_LIBS +- fi + +- # Check for system-dependent libraries X programs must link with. +- # Do this before checking for the system-independent R6 libraries +- # (-lICE), since we may need -lsocket or whatever for X linking. ++{ echo "$as_me:$LINENO: checking whether to build DocBook documentation" >&5 ++echo $ECHO_N "checking whether to build DocBook documentation... $ECHO_C" >&6; } ++if test x$XMLTO = xno ; then ++ have_docbook=no ++else ++ have_docbook=yes ++fi ++if test x$enable_docbook_docs = xauto ; then ++ if test x$have_docbook = xno ; then ++ enable_docbook_docs=no ++ else ++ enable_docbook_docs=yes ++ fi ++fi ++if test x$enable_docbook_docs = xyes; then ++ if test x$have_docbook = xno; then ++ { { echo "$as_me:$LINENO: error: Building DocBook docs explicitly required, but DocBook not found" >&5 ++echo "$as_me: error: Building DocBook docs explicitly required, but DocBook not found" >&2;} ++ { (exit 1); exit 1; }; } ++ fi ++fi ++ if test x$enable_docbook_docs = xyes; then ++ DOCBOOK_DOCS_ENABLED_TRUE= ++ DOCBOOK_DOCS_ENABLED_FALSE='#' ++else ++ DOCBOOK_DOCS_ENABLED_TRUE='#' ++ DOCBOOK_DOCS_ENABLED_FALSE= ++fi + +- if test "$ISC" = yes; then +- X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl_s -linet" +- else +- # Martyn Johnson says this is needed for Ultrix, if the X +- # libraries were built with DECnet support. And Karl Berry says +- # the Alpha needs dnet_stub (dnet does not exist). +- ac_xsave_LIBS="$LIBS"; LIBS="$LIBS $X_LIBS -lX11" +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ ++{ echo "$as_me:$LINENO: result: $enable_docbook_docs" >&5 ++echo "${ECHO_T}$enable_docbook_docs" >&6; } + +-/* Override any GCC internal prototype to avoid an error. +- Use char because int might match the return type of a GCC +- builtin and then its argument prototype would still apply. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-char XOpenDisplay (); +-int +-main () +-{ +-return XOpenDisplay (); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; ++# Extract the first word of "xsltproc", so it can be a program name with args. ++set dummy xsltproc; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_path_XSLTPROC+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ case $XSLTPROC in ++ [\\/]* | ?:[\\/]*) ++ ac_cv_path_XSLTPROC="$XSLTPROC" # Let the user override the test with a path. ++ ;; ++ *) ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_path_XSLTPROC="$as_dir/$ac_word$ac_exec_ext" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++ ;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then +- : ++fi ++XSLTPROC=$ac_cv_path_XSLTPROC ++if test -n "$XSLTPROC"; then ++ { echo "$as_me:$LINENO: result: $XSLTPROC" >&5 ++echo "${ECHO_T}$XSLTPROC" >&6; } + else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++ ++GETTEXT_PACKAGE=gnome-session-2.0 ++ ++cat >>confdefs.h <<_ACEOF ++#define GETTEXT_PACKAGE "$GETTEXT_PACKAGE" ++_ACEOF + +- { $as_echo "$as_me:$LINENO: checking for dnet_ntoa in -ldnet" >&5 +-$as_echo_n "checking for dnet_ntoa in -ldnet... " >&6; } +-if test "${ac_cv_lib_dnet_dnet_ntoa+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ ++ ++ ++ ++for ac_header in locale.h ++do ++as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` ++if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then ++ { echo "$as_me:$LINENO: checking for $ac_header" >&5 ++echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } ++if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++fi ++ac_res=`eval echo '${'$as_ac_Header'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } + else +- ac_check_lib_save_LIBS=$LIBS +-LIBS="-ldnet $LIBS" ++ # Is the header compilable? ++{ echo "$as_me:$LINENO: checking $ac_header usability" >&5 ++echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; } + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ +- +-/* Override any GCC internal prototype to avoid an error. +- Use char because int might match the return type of a GCC +- builtin and then its argument prototype would still apply. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-char dnet_ntoa (); +-int +-main () +-{ +-return dnet_ntoa (); +- ; +- return 0; +-} ++$ac_includes_default ++#include <$ac_header> + _ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" ++rm -f conftest.$ac_objext ++if { (ac_try="$ac_compile" + case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_link") 2>conftest.er1 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then +- ac_cv_lib_dnet_dnet_ntoa=yes ++ } && test -s conftest.$ac_objext; then ++ ac_header_compiler=yes + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +- ac_cv_lib_dnet_dnet_ntoa=no ++ ac_header_compiler=no + fi + +-rm -rf conftest.dSYM +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext +-LIBS=$ac_check_lib_save_LIBS +-fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dnet_dnet_ntoa" >&5 +-$as_echo "$ac_cv_lib_dnet_dnet_ntoa" >&6; } +-if test $ac_cv_lib_dnet_dnet_ntoa = yes; then +- X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet" +-fi ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 ++echo "${ECHO_T}$ac_header_compiler" >&6; } + +- if test $ac_cv_lib_dnet_dnet_ntoa = no; then +- { $as_echo "$as_me:$LINENO: checking for dnet_ntoa in -ldnet_stub" >&5 +-$as_echo_n "checking for dnet_ntoa in -ldnet_stub... " >&6; } +-if test "${ac_cv_lib_dnet_stub_dnet_ntoa+set}" = set; then +- $as_echo_n "(cached) " >&6 +-else +- ac_check_lib_save_LIBS=$LIBS +-LIBS="-ldnet_stub $LIBS" ++# Is the header present? ++{ echo "$as_me:$LINENO: checking $ac_header presence" >&5 ++echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; } + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ +- +-/* Override any GCC internal prototype to avoid an error. +- Use char because int might match the return type of a GCC +- builtin and then its argument prototype would still apply. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-char dnet_ntoa (); +-int +-main () +-{ +-return dnet_ntoa (); +- ; +- return 0; +-} ++#include <$ac_header> + _ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" ++if { (ac_try="$ac_cpp conftest.$ac_ext" + case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_link") 2>conftest.er1 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } >/dev/null && { ++ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext + }; then +- ac_cv_lib_dnet_stub_dnet_ntoa=yes ++ ac_header_preproc=yes + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +- ac_cv_lib_dnet_stub_dnet_ntoa=no ++ ac_header_preproc=no + fi + +-rm -rf conftest.dSYM +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext +-LIBS=$ac_check_lib_save_LIBS ++rm -f conftest.err conftest.$ac_ext ++{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 ++echo "${ECHO_T}$ac_header_preproc" >&6; } ++ ++# So? What about this header? ++case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in ++ yes:no: ) ++ { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 ++echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} ++ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 ++echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} ++ ac_header_preproc=yes ++ ;; ++ no:yes:* ) ++ { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 ++echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} ++ { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 ++echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} ++ { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 ++echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} ++ { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 ++echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} ++ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 ++echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} ++ { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 ++echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} ++ ( cat <<\_ASBOX ++## ---------------------------------------------------------------------------- ## ++## Report this to http://bugzilla.gnome.org/enter_bug.cgi?product=gnome-session ## ++## ---------------------------------------------------------------------------- ## ++_ASBOX ++ ) | sed "s/^/$as_me: WARNING: /" >&2 ++ ;; ++esac ++{ echo "$as_me:$LINENO: checking for $ac_header" >&5 ++echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } ++if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ eval "$as_ac_Header=\$ac_header_preproc" + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dnet_stub_dnet_ntoa" >&5 +-$as_echo "$ac_cv_lib_dnet_stub_dnet_ntoa" >&6; } +-if test $ac_cv_lib_dnet_stub_dnet_ntoa = yes; then +- X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet_stub" ++ac_res=`eval echo '${'$as_ac_Header'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } ++ + fi ++if test `eval echo '${'$as_ac_Header'}'` = yes; then ++ cat >>confdefs.h <<_ACEOF ++#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 ++_ACEOF + +- fi + fi + +-rm -rf conftest.dSYM +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext +- LIBS="$ac_xsave_LIBS" ++done + +- # msh@cis.ufl.edu says -lnsl (and -lsocket) are needed for his 386/AT, +- # to get the SysV transport functions. +- # Chad R. Larson says the Pyramis MIS-ES running DC/OSx (SVR4) +- # needs -lnsl. +- # The nsl library prevents programs from opening the X display +- # on Irix 5.2, according to T.E. Dickey. +- # The functions gethostbyname, getservbyname, and inet_addr are +- # in -lbsd on LynxOS 3.0.1/i386, according to Lars Hecking. +- { $as_echo "$as_me:$LINENO: checking for gethostbyname" >&5 +-$as_echo_n "checking for gethostbyname... " >&6; } +-if test "${ac_cv_func_gethostbyname+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ if test $ac_cv_header_locale_h = yes; then ++ { echo "$as_me:$LINENO: checking for LC_MESSAGES" >&5 ++echo $ECHO_N "checking for LC_MESSAGES... $ECHO_C" >&6; } ++if test "${am_cv_val_LC_MESSAGES+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ +@@ -24047,41 +16163,11 @@ + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ +-/* Define gethostbyname to an innocuous variant, in case declares gethostbyname. +- For example, HP-UX 11i declares gettimeofday. */ +-#define gethostbyname innocuous_gethostbyname +- +-/* System header to define __stub macros and hopefully few prototypes, +- which can conflict with char gethostbyname (); below. +- Prefer to if __STDC__ is defined, since +- exists even on freestanding compilers. */ +- +-#ifdef __STDC__ +-# include +-#else +-# include +-#endif +- +-#undef gethostbyname +- +-/* Override any GCC internal prototype to avoid an error. +- Use char because int might match the return type of a GCC +- builtin and then its argument prototype would still apply. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-char gethostbyname (); +-/* The GNU C library defines this for functions which it implements +- to always fail with ENOSYS. Some functions are actually named +- something starting with __ and the normal name is an alias. */ +-#if defined __stub_gethostbyname || defined __stub___gethostbyname +-choke me +-#endif +- ++#include + int + main () + { +-return gethostbyname (); ++return LC_MESSAGES + ; + return 0; + } +@@ -24092,190 +16178,189 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then +- ac_cv_func_gethostbyname=yes ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ am_cv_val_LC_MESSAGES=yes + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +- ac_cv_func_gethostbyname=no ++ am_cv_val_LC_MESSAGES=no + fi + +-rm -rf conftest.dSYM + rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_gethostbyname" >&5 +-$as_echo "$ac_cv_func_gethostbyname" >&6; } ++{ echo "$as_me:$LINENO: result: $am_cv_val_LC_MESSAGES" >&5 ++echo "${ECHO_T}$am_cv_val_LC_MESSAGES" >&6; } ++ if test $am_cv_val_LC_MESSAGES = yes; then + +- if test $ac_cv_func_gethostbyname = no; then +- { $as_echo "$as_me:$LINENO: checking for gethostbyname in -lnsl" >&5 +-$as_echo_n "checking for gethostbyname in -lnsl... " >&6; } +-if test "${ac_cv_lib_nsl_gethostbyname+set}" = set; then +- $as_echo_n "(cached) " >&6 ++cat >>confdefs.h <<\_ACEOF ++#define HAVE_LC_MESSAGES 1 ++_ACEOF ++ ++ fi ++ fi ++ USE_NLS=yes ++ ++ ++ gt_cv_have_gettext=no ++ ++ CATOBJEXT=NONE ++ XGETTEXT=: ++ INTLLIBS= ++ ++ if test "${ac_cv_header_libintl_h+set}" = set; then ++ { echo "$as_me:$LINENO: checking for libintl.h" >&5 ++echo $ECHO_N "checking for libintl.h... $ECHO_C" >&6; } ++if test "${ac_cv_header_libintl_h+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_header_libintl_h" >&5 ++echo "${ECHO_T}$ac_cv_header_libintl_h" >&6; } + else +- ac_check_lib_save_LIBS=$LIBS +-LIBS="-lnsl $LIBS" ++ # Is the header compilable? ++{ echo "$as_me:$LINENO: checking libintl.h usability" >&5 ++echo $ECHO_N "checking libintl.h usability... $ECHO_C" >&6; } + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ +- +-/* Override any GCC internal prototype to avoid an error. +- Use char because int might match the return type of a GCC +- builtin and then its argument prototype would still apply. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-char gethostbyname (); +-int +-main () +-{ +-return gethostbyname (); +- ; +- return 0; +-} ++$ac_includes_default ++#include + _ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" ++rm -f conftest.$ac_objext ++if { (ac_try="$ac_compile" + case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_link") 2>conftest.er1 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then +- ac_cv_lib_nsl_gethostbyname=yes ++ } && test -s conftest.$ac_objext; then ++ ac_header_compiler=yes + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +- ac_cv_lib_nsl_gethostbyname=no +-fi +- +-rm -rf conftest.dSYM +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext +-LIBS=$ac_check_lib_save_LIBS +-fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_nsl_gethostbyname" >&5 +-$as_echo "$ac_cv_lib_nsl_gethostbyname" >&6; } +-if test $ac_cv_lib_nsl_gethostbyname = yes; then +- X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl" ++ ac_header_compiler=no + fi + +- if test $ac_cv_lib_nsl_gethostbyname = no; then +- { $as_echo "$as_me:$LINENO: checking for gethostbyname in -lbsd" >&5 +-$as_echo_n "checking for gethostbyname in -lbsd... " >&6; } +-if test "${ac_cv_lib_bsd_gethostbyname+set}" = set; then +- $as_echo_n "(cached) " >&6 +-else +- ac_check_lib_save_LIBS=$LIBS +-LIBS="-lbsd $LIBS" +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +- +-/* Override any GCC internal prototype to avoid an error. +- Use char because int might match the return type of a GCC +- builtin and then its argument prototype would still apply. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-char gethostbyname (); +-int +-main () +-{ +-return gethostbyname (); +- ; +- return 0; +-} ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 ++echo "${ECHO_T}$ac_header_compiler" >&6; } ++ ++# Is the header present? ++{ echo "$as_me:$LINENO: checking libintl.h presence" >&5 ++echo $ECHO_N "checking libintl.h presence... $ECHO_C" >&6; } ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ + _ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++#include ++_ACEOF ++if { (ac_try="$ac_cpp conftest.$ac_ext" + case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_link") 2>conftest.er1 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } >/dev/null && { ++ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext + }; then +- ac_cv_lib_bsd_gethostbyname=yes ++ ac_header_preproc=yes + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +- ac_cv_lib_bsd_gethostbyname=no ++ ac_header_preproc=no + fi + +-rm -rf conftest.dSYM +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext +-LIBS=$ac_check_lib_save_LIBS +-fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_bsd_gethostbyname" >&5 +-$as_echo "$ac_cv_lib_bsd_gethostbyname" >&6; } +-if test $ac_cv_lib_bsd_gethostbyname = yes; then +- X_EXTRA_LIBS="$X_EXTRA_LIBS -lbsd" ++rm -f conftest.err conftest.$ac_ext ++{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 ++echo "${ECHO_T}$ac_header_preproc" >&6; } ++ ++# So? What about this header? ++case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in ++ yes:no: ) ++ { echo "$as_me:$LINENO: WARNING: libintl.h: accepted by the compiler, rejected by the preprocessor!" >&5 ++echo "$as_me: WARNING: libintl.h: accepted by the compiler, rejected by the preprocessor!" >&2;} ++ { echo "$as_me:$LINENO: WARNING: libintl.h: proceeding with the compiler's result" >&5 ++echo "$as_me: WARNING: libintl.h: proceeding with the compiler's result" >&2;} ++ ac_header_preproc=yes ++ ;; ++ no:yes:* ) ++ { echo "$as_me:$LINENO: WARNING: libintl.h: present but cannot be compiled" >&5 ++echo "$as_me: WARNING: libintl.h: present but cannot be compiled" >&2;} ++ { echo "$as_me:$LINENO: WARNING: libintl.h: check for missing prerequisite headers?" >&5 ++echo "$as_me: WARNING: libintl.h: check for missing prerequisite headers?" >&2;} ++ { echo "$as_me:$LINENO: WARNING: libintl.h: see the Autoconf documentation" >&5 ++echo "$as_me: WARNING: libintl.h: see the Autoconf documentation" >&2;} ++ { echo "$as_me:$LINENO: WARNING: libintl.h: section \"Present But Cannot Be Compiled\"" >&5 ++echo "$as_me: WARNING: libintl.h: section \"Present But Cannot Be Compiled\"" >&2;} ++ { echo "$as_me:$LINENO: WARNING: libintl.h: proceeding with the preprocessor's result" >&5 ++echo "$as_me: WARNING: libintl.h: proceeding with the preprocessor's result" >&2;} ++ { echo "$as_me:$LINENO: WARNING: libintl.h: in the future, the compiler will take precedence" >&5 ++echo "$as_me: WARNING: libintl.h: in the future, the compiler will take precedence" >&2;} ++ ( cat <<\_ASBOX ++## ---------------------------------------------------------------------------- ## ++## Report this to http://bugzilla.gnome.org/enter_bug.cgi?product=gnome-session ## ++## ---------------------------------------------------------------------------- ## ++_ASBOX ++ ) | sed "s/^/$as_me: WARNING: /" >&2 ++ ;; ++esac ++{ echo "$as_me:$LINENO: checking for libintl.h" >&5 ++echo $ECHO_N "checking for libintl.h... $ECHO_C" >&6; } ++if test "${ac_cv_header_libintl_h+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_cv_header_libintl_h=$ac_header_preproc + fi ++{ echo "$as_me:$LINENO: result: $ac_cv_header_libintl_h" >&5 ++echo "${ECHO_T}$ac_cv_header_libintl_h" >&6; } + +- fi +- fi ++fi ++if test $ac_cv_header_libintl_h = yes; then ++ gt_cv_func_dgettext_libintl="no" ++ libintl_extra_libs="" + +- # lieder@skyler.mavd.honeywell.com says without -lsocket, +- # socket/setsockopt and other routines are undefined under SCO ODT +- # 2.0. But -lsocket is broken on IRIX 5.2 (and is not necessary +- # on later versions), says Simon Leinen: it contains gethostby* +- # variants that don't use the name server (or something). -lsocket +- # must be given before -lnsl if both are needed. We assume that +- # if connect needs -lnsl, so does gethostbyname. +- { $as_echo "$as_me:$LINENO: checking for connect" >&5 +-$as_echo_n "checking for connect... " >&6; } +-if test "${ac_cv_func_connect+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ # ++ # First check in libc ++ # ++ { echo "$as_me:$LINENO: checking for ngettext in libc" >&5 ++echo $ECHO_N "checking for ngettext in libc... $ECHO_C" >&6; } ++if test "${gt_cv_func_ngettext_libc+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ +@@ -24283,41 +16368,13 @@ + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ +-/* Define connect to an innocuous variant, in case declares connect. +- For example, HP-UX 11i declares gettimeofday. */ +-#define connect innocuous_connect +- +-/* System header to define __stub macros and hopefully few prototypes, +- which can conflict with char connect (); below. +- Prefer to if __STDC__ is defined, since +- exists even on freestanding compilers. */ +- +-#ifdef __STDC__ +-# include +-#else +-# include +-#endif + +-#undef connect +- +-/* Override any GCC internal prototype to avoid an error. +- Use char because int might match the return type of a GCC +- builtin and then its argument prototype would still apply. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-char connect (); +-/* The GNU C library defines this for functions which it implements +- to always fail with ENOSYS. Some functions are actually named +- something starting with __ and the normal name is an alias. */ +-#if defined __stub_connect || defined __stub___connect +-choke me +-#endif ++#include + + int + main () + { +-return connect (); ++return !ngettext ("","", 1) + ; + return 0; + } +@@ -24328,62 +16385,52 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then +- ac_cv_func_connect=yes ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ gt_cv_func_ngettext_libc=yes + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +- ac_cv_func_connect=no ++ gt_cv_func_ngettext_libc=no + fi + +-rm -rf conftest.dSYM + rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext ++ + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_connect" >&5 +-$as_echo "$ac_cv_func_connect" >&6; } ++{ echo "$as_me:$LINENO: result: $gt_cv_func_ngettext_libc" >&5 ++echo "${ECHO_T}$gt_cv_func_ngettext_libc" >&6; } + +- if test $ac_cv_func_connect = no; then +- { $as_echo "$as_me:$LINENO: checking for connect in -lsocket" >&5 +-$as_echo_n "checking for connect in -lsocket... " >&6; } +-if test "${ac_cv_lib_socket_connect+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ if test "$gt_cv_func_ngettext_libc" = "yes" ; then ++ { echo "$as_me:$LINENO: checking for dgettext in libc" >&5 ++echo $ECHO_N "checking for dgettext in libc... $ECHO_C" >&6; } ++if test "${gt_cv_func_dgettext_libc+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- ac_check_lib_save_LIBS=$LIBS +-LIBS="-lsocket $X_EXTRA_LIBS $LIBS" +-cat >conftest.$ac_ext <<_ACEOF ++ cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + +-/* Override any GCC internal prototype to avoid an error. +- Use char because int might match the return type of a GCC +- builtin and then its argument prototype would still apply. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-char connect (); ++#include ++ + int + main () + { +-return connect (); ++return !dgettext ("","") + ; + return 0; + } +@@ -24394,47 +16441,43 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then +- ac_cv_lib_socket_connect=yes ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ gt_cv_func_dgettext_libc=yes + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +- ac_cv_lib_socket_connect=no ++ gt_cv_func_dgettext_libc=no + fi + +-rm -rf conftest.dSYM + rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +-LIBS=$ac_check_lib_save_LIBS +-fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_socket_connect" >&5 +-$as_echo "$ac_cv_lib_socket_connect" >&6; } +-if test $ac_cv_lib_socket_connect = yes; then +- X_EXTRA_LIBS="-lsocket $X_EXTRA_LIBS" ++ + fi ++{ echo "$as_me:$LINENO: result: $gt_cv_func_dgettext_libc" >&5 ++echo "${ECHO_T}$gt_cv_func_dgettext_libc" >&6; } ++ fi + +- fi ++ if test "$gt_cv_func_ngettext_libc" = "yes" ; then + +- # Guillermo Gomez says -lposix is necessary on A/UX. +- { $as_echo "$as_me:$LINENO: checking for remove" >&5 +-$as_echo_n "checking for remove... " >&6; } +-if test "${ac_cv_func_remove+set}" = set; then +- $as_echo_n "(cached) " >&6 ++for ac_func in bind_textdomain_codeset ++do ++as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` ++{ echo "$as_me:$LINENO: checking for $ac_func" >&5 ++echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; } ++if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ +@@ -24442,12 +16485,12 @@ + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ +-/* Define remove to an innocuous variant, in case declares remove. ++/* Define $ac_func to an innocuous variant, in case declares $ac_func. + For example, HP-UX 11i declares gettimeofday. */ +-#define remove innocuous_remove ++#define $ac_func innocuous_$ac_func + + /* System header to define __stub macros and hopefully few prototypes, +- which can conflict with char remove (); below. ++ which can conflict with char $ac_func (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ + +@@ -24457,7 +16500,7 @@ + # include + #endif + +-#undef remove ++#undef $ac_func + + /* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC +@@ -24465,18 +16508,18 @@ + #ifdef __cplusplus + extern "C" + #endif +-char remove (); ++char $ac_func (); + /* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +-#if defined __stub_remove || defined __stub___remove ++#if defined __stub_$ac_func || defined __stub___$ac_func + choke me + #endif + + int + main () + { +-return remove (); ++return $ac_func (); + ; + return 0; + } +@@ -24487,155 +16530,74 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then +- ac_cv_func_remove=yes ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ eval "$as_ac_var=yes" + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +- ac_cv_func_remove=no ++ eval "$as_ac_var=no" + fi + +-rm -rf conftest.dSYM + rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_remove" >&5 +-$as_echo "$ac_cv_func_remove" >&6; } +- +- if test $ac_cv_func_remove = no; then +- { $as_echo "$as_me:$LINENO: checking for remove in -lposix" >&5 +-$as_echo_n "checking for remove in -lposix... " >&6; } +-if test "${ac_cv_lib_posix_remove+set}" = set; then +- $as_echo_n "(cached) " >&6 +-else +- ac_check_lib_save_LIBS=$LIBS +-LIBS="-lposix $LIBS" +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +- +-/* Override any GCC internal prototype to avoid an error. +- Use char because int might match the return type of a GCC +- builtin and then its argument prototype would still apply. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-char remove (); +-int +-main () +-{ +-return remove (); +- ; +- return 0; +-} ++ac_res=`eval echo '${'$as_ac_var'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } ++if test `eval echo '${'$as_ac_var'}'` = yes; then ++ cat >>confdefs.h <<_ACEOF ++#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 + _ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then +- ac_cv_lib_posix_remove=yes +-else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 + +- ac_cv_lib_posix_remove=no + fi ++done + +-rm -rf conftest.dSYM +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext +-LIBS=$ac_check_lib_save_LIBS +-fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_posix_remove" >&5 +-$as_echo "$ac_cv_lib_posix_remove" >&6; } +-if test $ac_cv_lib_posix_remove = yes; then +- X_EXTRA_LIBS="$X_EXTRA_LIBS -lposix" +-fi ++ fi + +- fi ++ # ++ # If we don't have everything we want, check in libintl ++ # ++ if test "$gt_cv_func_dgettext_libc" != "yes" \ ++ || test "$gt_cv_func_ngettext_libc" != "yes" \ ++ || test "$ac_cv_func_bind_textdomain_codeset" != "yes" ; then + +- # BSDI BSD/OS 2.1 needs -lipc for XOpenDisplay. +- { $as_echo "$as_me:$LINENO: checking for shmat" >&5 +-$as_echo_n "checking for shmat... " >&6; } +-if test "${ac_cv_func_shmat+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ { echo "$as_me:$LINENO: checking for bindtextdomain in -lintl" >&5 ++echo $ECHO_N "checking for bindtextdomain in -lintl... $ECHO_C" >&6; } ++if test "${ac_cv_lib_intl_bindtextdomain+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- cat >conftest.$ac_ext <<_ACEOF ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-lintl $LIBS" ++cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ +-/* Define shmat to an innocuous variant, in case declares shmat. +- For example, HP-UX 11i declares gettimeofday. */ +-#define shmat innocuous_shmat +- +-/* System header to define __stub macros and hopefully few prototypes, +- which can conflict with char shmat (); below. +- Prefer to if __STDC__ is defined, since +- exists even on freestanding compilers. */ +- +-#ifdef __STDC__ +-# include +-#else +-# include +-#endif +- +-#undef shmat + + /* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC +- builtin and then its argument prototype would still apply. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-char shmat (); +-/* The GNU C library defines this for functions which it implements +- to always fail with ENOSYS. Some functions are actually named +- something starting with __ and the normal name is an alias. */ +-#if defined __stub_shmat || defined __stub___shmat +-choke me ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" + #endif +- ++char bindtextdomain (); + int + main () + { +-return shmat (); ++return bindtextdomain (); + ; + return 0; + } +@@ -24646,44 +16608,40 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then +- ac_cv_func_shmat=yes ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_intl_bindtextdomain=yes + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +- ac_cv_func_shmat=no ++ ac_cv_lib_intl_bindtextdomain=no + fi + +-rm -rf conftest.dSYM + rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_shmat" >&5 +-$as_echo "$ac_cv_func_shmat" >&6; } +- +- if test $ac_cv_func_shmat = no; then +- { $as_echo "$as_me:$LINENO: checking for shmat in -lipc" >&5 +-$as_echo_n "checking for shmat in -lipc... " >&6; } +-if test "${ac_cv_lib_ipc_shmat+set}" = set; then +- $as_echo_n "(cached) " >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_intl_bindtextdomain" >&5 ++echo "${ECHO_T}$ac_cv_lib_intl_bindtextdomain" >&6; } ++if test $ac_cv_lib_intl_bindtextdomain = yes; then ++ { echo "$as_me:$LINENO: checking for ngettext in -lintl" >&5 ++echo $ECHO_N "checking for ngettext in -lintl... $ECHO_C" >&6; } ++if test "${ac_cv_lib_intl_ngettext+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + ac_check_lib_save_LIBS=$LIBS +-LIBS="-lipc $LIBS" ++LIBS="-lintl $LIBS" + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -24697,11 +16655,11 @@ + #ifdef __cplusplus + extern "C" + #endif +-char shmat (); ++char ngettext (); + int + main () + { +-return shmat (); ++return ngettext (); + ; + return 0; + } +@@ -24712,59 +16670,40 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then +- ac_cv_lib_ipc_shmat=yes ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_intl_ngettext=yes + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +- ac_cv_lib_ipc_shmat=no ++ ac_cv_lib_intl_ngettext=no + fi + +-rm -rf conftest.dSYM + rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_ipc_shmat" >&5 +-$as_echo "$ac_cv_lib_ipc_shmat" >&6; } +-if test $ac_cv_lib_ipc_shmat = yes; then +- X_EXTRA_LIBS="$X_EXTRA_LIBS -lipc" +-fi +- +- fi +- fi +- +- # Check for libraries that X11R6 Xt/Xaw programs need. +- ac_save_LDFLAGS=$LDFLAGS +- test -n "$x_libraries" && LDFLAGS="$LDFLAGS -L$x_libraries" +- # SM needs ICE to (dynamically) link under SunOS 4.x (so we have to +- # check for ICE first), but we must link in the order -lSM -lICE or +- # we get undefined symbols. So assume we have SM if we have ICE. +- # These have to be linked with before -lX11, unlike the other +- # libraries we check for below, so use a different variable. +- # John Interrante, Karl Berry +- { $as_echo "$as_me:$LINENO: checking for IceConnectionNumber in -lICE" >&5 +-$as_echo_n "checking for IceConnectionNumber in -lICE... " >&6; } +-if test "${ac_cv_lib_ICE_IceConnectionNumber+set}" = set; then +- $as_echo_n "(cached) " >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_intl_ngettext" >&5 ++echo "${ECHO_T}$ac_cv_lib_intl_ngettext" >&6; } ++if test $ac_cv_lib_intl_ngettext = yes; then ++ { echo "$as_me:$LINENO: checking for dgettext in -lintl" >&5 ++echo $ECHO_N "checking for dgettext in -lintl... $ECHO_C" >&6; } ++if test "${ac_cv_lib_intl_dgettext+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + ac_check_lib_save_LIBS=$LIBS +-LIBS="-lICE $X_EXTRA_LIBS $LIBS" ++LIBS="-lintl $LIBS" + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -24778,11 +16717,11 @@ + #ifdef __cplusplus + extern "C" + #endif +-char IceConnectionNumber (); ++char dgettext (); + int + main () + { +-return IceConnectionNumber (); ++return dgettext (); + ; + return 0; + } +@@ -24793,61 +16732,53 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then +- ac_cv_lib_ICE_IceConnectionNumber=yes ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_intl_dgettext=yes + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +- ac_cv_lib_ICE_IceConnectionNumber=no ++ ac_cv_lib_intl_dgettext=no + fi + +-rm -rf conftest.dSYM + rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_ICE_IceConnectionNumber" >&5 +-$as_echo "$ac_cv_lib_ICE_IceConnectionNumber" >&6; } +-if test $ac_cv_lib_ICE_IceConnectionNumber = yes; then +- X_PRE_LIBS="$X_PRE_LIBS -lSM -lICE" ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_intl_dgettext" >&5 ++echo "${ECHO_T}$ac_cv_lib_intl_dgettext" >&6; } ++if test $ac_cv_lib_intl_dgettext = yes; then ++ gt_cv_func_dgettext_libintl=yes + fi + +- LDFLAGS=$ac_save_LDFLAGS +- + fi + +- +- if test x$no_x = xyes ; then +- { { $as_echo "$as_me:$LINENO: error: X development libraries not found" >&5 +-$as_echo "$as_me: error: X development libraries not found" >&2;} +- { (exit 1); exit 1; }; } +- else +- X_LIBS="$X_PRE_LIBS $X_LIBS -lX11 $X_EXTRA_LIBS" +- fi + fi + +-{ $as_echo "$as_me:$LINENO: checking for XauFileName in -lXau" >&5 +-$as_echo_n "checking for XauFileName in -lXau... " >&6; } +-if test "${ac_cv_lib_Xau_XauFileName+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ ++ if test "$gt_cv_func_dgettext_libintl" != "yes" ; then ++ { echo "$as_me:$LINENO: checking if -liconv is needed to use gettext" >&5 ++echo $ECHO_N "checking if -liconv is needed to use gettext... $ECHO_C" >&6; } ++ { echo "$as_me:$LINENO: result: " >&5 ++echo "${ECHO_T}" >&6; } ++ { echo "$as_me:$LINENO: checking for ngettext in -lintl" >&5 ++echo $ECHO_N "checking for ngettext in -lintl... $ECHO_C" >&6; } ++if test "${ac_cv_lib_intl_ngettext+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + ac_check_lib_save_LIBS=$LIBS +-LIBS="-lXau $X_LIBS $LIBS" ++LIBS="-lintl -liconv $LIBS" + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -24861,11 +16792,11 @@ + #ifdef __cplusplus + extern "C" + #endif +-char XauFileName (); ++char ngettext (); + int + main () + { +-return XauFileName (); ++return ngettext (); + ; + return 0; + } +@@ -24876,367 +16807,409 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then +- ac_cv_lib_Xau_XauFileName=yes ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_intl_ngettext=yes + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +- ac_cv_lib_Xau_XauFileName=no ++ ac_cv_lib_intl_ngettext=no + fi + +-rm -rf conftest.dSYM + rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_Xau_XauFileName" >&5 +-$as_echo "$ac_cv_lib_Xau_XauFileName" >&6; } +-if test $ac_cv_lib_Xau_XauFileName = yes; then +- X_LIBS="$X_LIBS -lXau" +-else +- { { $as_echo "$as_me:$LINENO: error: +-*** Can't find the Xauth library. It is needed to compile gnome-session." >&5 +-$as_echo "$as_me: error: +-*** Can't find the Xauth library. It is needed to compile gnome-session." >&2;} +- { (exit 1); exit 1; }; } +-fi +- +- +- +- +- +-have_xsync=no +-{ $as_echo "$as_me:$LINENO: checking for X11/extensions/sync.h" >&5 +-$as_echo_n "checking for X11/extensions/sync.h... " >&6; } +-if test "${ac_cv_header_X11_extensions_sync_h+set}" = set; then +- $as_echo_n "(cached) " >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_intl_ngettext" >&5 ++echo "${ECHO_T}$ac_cv_lib_intl_ngettext" >&6; } ++if test $ac_cv_lib_intl_ngettext = yes; then ++ { echo "$as_me:$LINENO: checking for dcgettext in -lintl" >&5 ++echo $ECHO_N "checking for dcgettext in -lintl... $ECHO_C" >&6; } ++if test "${ac_cv_lib_intl_dcgettext+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- cat >conftest.$ac_ext <<_ACEOF ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-lintl -liconv $LIBS" ++cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ +-#include + +-#include ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char dcgettext (); ++int ++main () ++{ ++return dcgettext (); ++ ; ++ return 0; ++} + _ACEOF +-rm -f conftest.$ac_objext +-if { (ac_try="$ac_compile" ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" + case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_compile") 2>conftest.er1 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err +- } && test -s conftest.$ac_objext; then +- ac_cv_header_X11_extensions_sync_h=yes ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_intl_dcgettext=yes + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +- ac_cv_header_X11_extensions_sync_h=no ++ ac_cv_lib_intl_dcgettext=no + fi + +-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_X11_extensions_sync_h" >&5 +-$as_echo "$ac_cv_header_X11_extensions_sync_h" >&6; } +-if test $ac_cv_header_X11_extensions_sync_h = yes; then +- have_xsync=yes ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_intl_dcgettext" >&5 ++echo "${ECHO_T}$ac_cv_lib_intl_dcgettext" >&6; } ++if test $ac_cv_lib_intl_dcgettext = yes; then ++ gt_cv_func_dgettext_libintl=yes ++ libintl_extra_libs=-liconv ++else ++ : + fi + +- +-if test "$have_xsync" = yes; then +- +-cat >>confdefs.h <<\_ACEOF +-#define HAVE_XSYNC 1 +-_ACEOF +- ++else ++ : + fi + ++ fi + +-have_xtest=no +- +-pkg_failed=no +-{ $as_echo "$as_me:$LINENO: checking for XTEST" >&5 +-$as_echo_n "checking for XTEST... " >&6; } ++ # ++ # If we found libintl, then check in it for bind_textdomain_codeset(); ++ # we'll prefer libc if neither have bind_textdomain_codeset(), ++ # and both have dgettext and ngettext ++ # ++ if test "$gt_cv_func_dgettext_libintl" = "yes" ; then ++ glib_save_LIBS="$LIBS" ++ LIBS="$LIBS -lintl $libintl_extra_libs" ++ unset ac_cv_func_bind_textdomain_codeset + +-if test -n "$XTEST_CFLAGS"; then +- pkg_cv_XTEST_CFLAGS="$XTEST_CFLAGS" +- elif test -n "$PKG_CONFIG"; then +- if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"xtst\"") >&5 +- ($PKG_CONFIG --exists --print-errors "xtst") 2>&5 +- ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then +- pkg_cv_XTEST_CFLAGS=`$PKG_CONFIG --cflags "xtst" 2>/dev/null` +-else +- pkg_failed=yes +-fi +- else +- pkg_failed=untried +-fi +-if test -n "$XTEST_LIBS"; then +- pkg_cv_XTEST_LIBS="$XTEST_LIBS" +- elif test -n "$PKG_CONFIG"; then +- if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"xtst\"") >&5 +- ($PKG_CONFIG --exists --print-errors "xtst") 2>&5 +- ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then +- pkg_cv_XTEST_LIBS=`$PKG_CONFIG --libs "xtst" 2>/dev/null` ++for ac_func in bind_textdomain_codeset ++do ++as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` ++{ echo "$as_me:$LINENO: checking for $ac_func" >&5 ++echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; } ++if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- pkg_failed=yes +-fi +- else +- pkg_failed=untried +-fi ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++/* Define $ac_func to an innocuous variant, in case declares $ac_func. ++ For example, HP-UX 11i declares gettimeofday. */ ++#define $ac_func innocuous_$ac_func + ++/* System header to define __stub macros and hopefully few prototypes, ++ which can conflict with char $ac_func (); below. ++ Prefer to if __STDC__ is defined, since ++ exists even on freestanding compilers. */ + ++#ifdef __STDC__ ++# include ++#else ++# include ++#endif + +-if test $pkg_failed = yes; then ++#undef $ac_func + +-if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then +- _pkg_short_errors_supported=yes +-else +- _pkg_short_errors_supported=no +-fi +- if test $_pkg_short_errors_supported = yes; then +- XTEST_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "xtst" 2>&1` +- else +- XTEST_PKG_ERRORS=`$PKG_CONFIG --print-errors "xtst" 2>&1` +- fi +- # Put the nasty error message in config.log where it belongs +- echo "$XTEST_PKG_ERRORS" >&5 ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char $ac_func (); ++/* The GNU C library defines this for functions which it implements ++ to always fail with ENOSYS. Some functions are actually named ++ something starting with __ and the normal name is an alias. */ ++#if defined __stub_$ac_func || defined __stub___$ac_func ++choke me ++#endif + +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } +- have_xtest=no +-elif test $pkg_failed = untried; then +- have_xtest=no ++int ++main () ++{ ++return $ac_func (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ eval "$as_ac_var=yes" + else +- XTEST_CFLAGS=$pkg_cv_XTEST_CFLAGS +- XTEST_LIBS=$pkg_cv_XTEST_LIBS +- { $as_echo "$as_me:$LINENO: result: yes" >&5 +-$as_echo "yes" >&6; } +- have_xtest=yes ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ eval "$as_ac_var=no" + fi +-if test "$have_xtest" = yes; then + +-cat >>confdefs.h <<\_ACEOF +-#define HAVE_XTEST 1 ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++fi ++ac_res=`eval echo '${'$as_ac_var'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } ++if test `eval echo '${'$as_ac_var'}'` = yes; then ++ cat >>confdefs.h <<_ACEOF ++#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 + _ACEOF + + fi ++done + ++ LIBS="$glib_save_LIBS" + ++ if test "$ac_cv_func_bind_textdomain_codeset" = "yes" ; then ++ gt_cv_func_dgettext_libc=no ++ else ++ if test "$gt_cv_func_dgettext_libc" = "yes" \ ++ && test "$gt_cv_func_ngettext_libc" = "yes"; then ++ gt_cv_func_dgettext_libintl=no ++ fi ++ fi ++ fi ++ fi + ++ if test "$gt_cv_func_dgettext_libc" = "yes" \ ++ || test "$gt_cv_func_dgettext_libintl" = "yes"; then ++ gt_cv_have_gettext=yes ++ fi + ++ if test "$gt_cv_func_dgettext_libintl" = "yes"; then ++ INTLLIBS="-lintl $libintl_extra_libs" ++ fi + ++ if test "$gt_cv_have_gettext" = "yes"; then + +-pkg_failed=no +-{ $as_echo "$as_me:$LINENO: checking for XRENDER" >&5 +-$as_echo_n "checking for XRENDER... " >&6; } ++cat >>confdefs.h <<\_ACEOF ++#define HAVE_GETTEXT 1 ++_ACEOF + +-if test -n "$XRENDER_CFLAGS"; then +- pkg_cv_XRENDER_CFLAGS="$XRENDER_CFLAGS" +- elif test -n "$PKG_CONFIG"; then +- if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"xrender\"") >&5 +- ($PKG_CONFIG --exists --print-errors "xrender") 2>&5 +- ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then +- pkg_cv_XRENDER_CFLAGS=`$PKG_CONFIG --cflags "xrender" 2>/dev/null` ++ # Extract the first word of "msgfmt", so it can be a program name with args. ++set dummy msgfmt; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_path_MSGFMT+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- pkg_failed=yes +-fi +- else +- pkg_failed=untried ++ case "$MSGFMT" in ++ /*) ++ ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path. ++ ;; ++ *) ++ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" ++ for ac_dir in $PATH; do ++ test -z "$ac_dir" && ac_dir=. ++ if test -f $ac_dir/$ac_word; then ++ if test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"; then ++ ac_cv_path_MSGFMT="$ac_dir/$ac_word" ++ break ++ fi ++ fi ++ done ++ IFS="$ac_save_ifs" ++ test -z "$ac_cv_path_MSGFMT" && ac_cv_path_MSGFMT="no" ++ ;; ++esac + fi +-if test -n "$XRENDER_LIBS"; then +- pkg_cv_XRENDER_LIBS="$XRENDER_LIBS" +- elif test -n "$PKG_CONFIG"; then +- if test -n "$PKG_CONFIG" && \ +- { ($as_echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"xrender\"") >&5 +- ($PKG_CONFIG --exists --print-errors "xrender") 2>&5 +- ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then +- pkg_cv_XRENDER_LIBS=`$PKG_CONFIG --libs "xrender" 2>/dev/null` ++MSGFMT="$ac_cv_path_MSGFMT" ++if test "$MSGFMT" != "no"; then ++ { echo "$as_me:$LINENO: result: $MSGFMT" >&5 ++echo "${ECHO_T}$MSGFMT" >&6; } + else +- pkg_failed=yes +-fi +- else +- pkg_failed=untried ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi ++ if test "$MSGFMT" != "no"; then ++ glib_save_LIBS="$LIBS" ++ LIBS="$LIBS $INTLLIBS" + ++for ac_func in dcgettext ++do ++as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` ++{ echo "$as_me:$LINENO: checking for $ac_func" >&5 ++echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; } ++if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++/* Define $ac_func to an innocuous variant, in case declares $ac_func. ++ For example, HP-UX 11i declares gettimeofday. */ ++#define $ac_func innocuous_$ac_func + ++/* System header to define __stub macros and hopefully few prototypes, ++ which can conflict with char $ac_func (); below. ++ Prefer to if __STDC__ is defined, since ++ exists even on freestanding compilers. */ + +-if test $pkg_failed = yes; then +- +-if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then +- _pkg_short_errors_supported=yes +-else +- _pkg_short_errors_supported=no +-fi +- if test $_pkg_short_errors_supported = yes; then +- XRENDER_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "xrender" 2>&1` +- else +- XRENDER_PKG_ERRORS=`$PKG_CONFIG --print-errors "xrender" 2>&1` +- fi +- # Put the nasty error message in config.log where it belongs +- echo "$XRENDER_PKG_ERRORS" >&5 ++#ifdef __STDC__ ++# include ++#else ++# include ++#endif + +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } +- have_xrender=no +-elif test $pkg_failed = untried; then +- have_xrender=no +-else +- XRENDER_CFLAGS=$pkg_cv_XRENDER_CFLAGS +- XRENDER_LIBS=$pkg_cv_XRENDER_LIBS +- { $as_echo "$as_me:$LINENO: result: yes" >&5 +-$as_echo "yes" >&6; } +- have_xrender=yes +-fi +- if test x$have_xrender = xyes; then +- HAVE_XRENDER_TRUE= +- HAVE_XRENDER_FALSE='#' +-else +- HAVE_XRENDER_TRUE='#' +- HAVE_XRENDER_FALSE= +-fi ++#undef $ac_func + +-if test $have_xrender=yes; then ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char $ac_func (); ++/* The GNU C library defines this for functions which it implements ++ to always fail with ENOSYS. Some functions are actually named ++ something starting with __ and the normal name is an alias. */ ++#if defined __stub_$ac_func || defined __stub___$ac_func ++choke me ++#endif + +-cat >>confdefs.h <<\_ACEOF +-#define HAVE_XRENDER 1 ++int ++main () ++{ ++return $ac_func (); ++ ; ++ return 0; ++} + _ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ eval "$as_ac_var=yes" ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 + ++ eval "$as_ac_var=no" + fi + +- +- +- +- +-# Check whether --enable-docbook-docs was given. +-if test "${enable_docbook_docs+set}" = set; then +- enableval=$enable_docbook_docs; enable_docbook_docs=$enableval +-else +- enable_docbook_docs=auto ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext + fi ++ac_res=`eval echo '${'$as_ac_var'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } ++if test `eval echo '${'$as_ac_var'}'` = yes; then ++ cat >>confdefs.h <<_ACEOF ++#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 ++_ACEOF + +-# Extract the first word of "xmlto", so it can be a program name with args. +-set dummy xmlto; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } +-if test "${ac_cv_path_XMLTO+set}" = set; then +- $as_echo_n "(cached) " >&6 +-else +- case $XMLTO in +- [\\/]* | ?:[\\/]*) +- ac_cv_path_XMLTO="$XMLTO" # Let the user override the test with a path. +- ;; +- *) +- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +-for as_dir in $PATH +-do +- IFS=$as_save_IFS +- test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do +- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then +- ac_cv_path_XMLTO="$as_dir/$ac_word$ac_exec_ext" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 +- break 2 +- fi +-done ++fi + done +-IFS=$as_save_IFS + +- test -z "$ac_cv_path_XMLTO" && ac_cv_path_XMLTO="no" +- ;; +-esac +-fi +-XMLTO=$ac_cv_path_XMLTO +-if test -n "$XMLTO"; then +- { $as_echo "$as_me:$LINENO: result: $XMLTO" >&5 +-$as_echo "$XMLTO" >&6; } +-else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } +-fi ++ MSGFMT_OPTS= ++ { echo "$as_me:$LINENO: checking if msgfmt accepts -c" >&5 ++echo $ECHO_N "checking if msgfmt accepts -c... $ECHO_C" >&6; } ++ cat >conftest.foo <<_ACEOF + ++msgid "" ++msgstr "" ++"Content-Type: text/plain; charset=UTF-8\n" ++"Project-Id-Version: test 1.0\n" ++"PO-Revision-Date: 2007-02-15 12:01+0100\n" ++"Last-Translator: test \n" ++"Language-Team: C \n" ++"MIME-Version: 1.0\n" ++"Content-Transfer-Encoding: 8bit\n" + +-{ $as_echo "$as_me:$LINENO: checking whether to build DocBook documentation" >&5 +-$as_echo_n "checking whether to build DocBook documentation... " >&6; } +-if test x$XMLTO = xno ; then +- have_docbook=no +-else +- have_docbook=yes +-fi +-if test x$enable_docbook_docs = xauto ; then +- if test x$have_docbook = xno ; then +- enable_docbook_docs=no +- else +- enable_docbook_docs=yes +- fi +-fi +-if test x$enable_docbook_docs = xyes; then +- if test x$have_docbook = xno; then +- { { $as_echo "$as_me:$LINENO: error: Building DocBook docs explicitly required, but DocBook not found" >&5 +-$as_echo "$as_me: error: Building DocBook docs explicitly required, but DocBook not found" >&2;} +- { (exit 1); exit 1; }; } +- fi +-fi +- if test x$enable_docbook_docs = xyes; then +- DOCBOOK_DOCS_ENABLED_TRUE= +- DOCBOOK_DOCS_ENABLED_FALSE='#' +-else +- DOCBOOK_DOCS_ENABLED_TRUE='#' +- DOCBOOK_DOCS_ENABLED_FALSE= ++_ACEOF ++if { (echo "$as_me:$LINENO: \$MSGFMT -c -o /dev/null conftest.foo") >&5 ++ ($MSGFMT -c -o /dev/null conftest.foo) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ MSGFMT_OPTS=-c; { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++else { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++echo "$as_me: failed input was:" >&5 ++sed 's/^/| /' conftest.foo >&5 + fi + +-{ $as_echo "$as_me:$LINENO: result: $enable_docbook_docs" >&5 +-$as_echo "$enable_docbook_docs" >&6; } +- +-# Extract the first word of "xsltproc", so it can be a program name with args. +-set dummy xsltproc; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } +-if test "${ac_cv_path_XSLTPROC+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ # Extract the first word of "gmsgfmt", so it can be a program name with args. ++set dummy gmsgfmt; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_path_GMSGFMT+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- case $XSLTPROC in ++ case $GMSGFMT in + [\\/]* | ?:[\\/]*) +- ac_cv_path_XSLTPROC="$XSLTPROC" # Let the user override the test with a path. ++ ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +@@ -25246,192 +17219,323 @@ + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then +- ac_cv_path_XSLTPROC="$as_dir/$ac_word$ac_exec_ext" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ ac_cv_path_GMSGFMT="$as_dir/$ac_word$ac_exec_ext" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done + IFS=$as_save_IFS + ++ test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT" + ;; + esac + fi +-XSLTPROC=$ac_cv_path_XSLTPROC +-if test -n "$XSLTPROC"; then +- { $as_echo "$as_me:$LINENO: result: $XSLTPROC" >&5 +-$as_echo "$XSLTPROC" >&6; } ++GMSGFMT=$ac_cv_path_GMSGFMT ++if test -n "$GMSGFMT"; then ++ { echo "$as_me:$LINENO: result: $GMSGFMT" >&5 ++echo "${ECHO_T}$GMSGFMT" >&6; } + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + + +- +-GETTEXT_PACKAGE=gnome-session-2.0 +- +-cat >>confdefs.h <<_ACEOF +-#define GETTEXT_PACKAGE "$GETTEXT_PACKAGE" +-_ACEOF +- +- +- +- +- +-for ac_header in locale.h +-do +-as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` +-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then +- { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 +-$as_echo_n "checking for $ac_header... " >&6; } +-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then +- $as_echo_n "(cached) " >&6 ++ # Extract the first word of "xgettext", so it can be a program name with args. ++set dummy xgettext; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_path_XGETTEXT+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ case "$XGETTEXT" in ++ /*) ++ ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path. ++ ;; ++ *) ++ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" ++ for ac_dir in $PATH; do ++ test -z "$ac_dir" && ac_dir=. ++ if test -f $ac_dir/$ac_word; then ++ if test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"; then ++ ac_cv_path_XGETTEXT="$ac_dir/$ac_word" ++ break ++ fi ++ fi ++ done ++ IFS="$ac_save_ifs" ++ test -z "$ac_cv_path_XGETTEXT" && ac_cv_path_XGETTEXT=":" ++ ;; ++esac + fi +-ac_res=`eval 'as_val=${'$as_ac_Header'} +- $as_echo "$as_val"'` +- { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 +-$as_echo "$ac_res" >&6; } ++XGETTEXT="$ac_cv_path_XGETTEXT" ++if test "$XGETTEXT" != ":"; then ++ { echo "$as_me:$LINENO: result: $XGETTEXT" >&5 ++echo "${ECHO_T}$XGETTEXT" >&6; } + else +- # Is the header compilable? +-{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5 +-$as_echo_n "checking $ac_header usability... " >&6; } +-cat >conftest.$ac_ext <<_ACEOF ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ +-$ac_includes_default +-#include <$ac_header> ++ ++int ++main () ++{ ++extern int _nl_msg_cat_cntr; ++ return _nl_msg_cat_cntr ++ ; ++ return 0; ++} + _ACEOF +-rm -f conftest.$ac_objext +-if { (ac_try="$ac_compile" ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" + case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_compile") 2>conftest.er1 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err +- } && test -s conftest.$ac_objext; then +- ac_header_compiler=yes ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ CATOBJEXT=.gmo ++ DATADIRNAME=share + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +- ac_header_compiler=no +-fi +- +-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +-{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +-$as_echo "$ac_header_compiler" >&6; } +- +-# Is the header present? +-{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5 +-$as_echo_n "checking $ac_header presence... " >&6; } +-cat >conftest.$ac_ext <<_ACEOF ++ case $host in ++ *-*-solaris*) ++ { echo "$as_me:$LINENO: checking for bind_textdomain_codeset" >&5 ++echo $ECHO_N "checking for bind_textdomain_codeset... $ECHO_C" >&6; } ++if test "${ac_cv_func_bind_textdomain_codeset+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ +-#include <$ac_header> ++/* Define bind_textdomain_codeset to an innocuous variant, in case declares bind_textdomain_codeset. ++ For example, HP-UX 11i declares gettimeofday. */ ++#define bind_textdomain_codeset innocuous_bind_textdomain_codeset ++ ++/* System header to define __stub macros and hopefully few prototypes, ++ which can conflict with char bind_textdomain_codeset (); below. ++ Prefer to if __STDC__ is defined, since ++ exists even on freestanding compilers. */ ++ ++#ifdef __STDC__ ++# include ++#else ++# include ++#endif ++ ++#undef bind_textdomain_codeset ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char bind_textdomain_codeset (); ++/* The GNU C library defines this for functions which it implements ++ to always fail with ENOSYS. Some functions are actually named ++ something starting with __ and the normal name is an alias. */ ++#if defined __stub_bind_textdomain_codeset || defined __stub___bind_textdomain_codeset ++choke me ++#endif ++ ++int ++main () ++{ ++return bind_textdomain_codeset (); ++ ; ++ return 0; ++} + _ACEOF +-if { (ac_try="$ac_cpp conftest.$ac_ext" ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" + case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } >/dev/null && { +- test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || + test ! -s conftest.err +- }; then +- ac_header_preproc=yes ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_func_bind_textdomain_codeset=yes + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +- ac_header_preproc=no ++ ac_cv_func_bind_textdomain_codeset=no + fi + +-rm -f conftest.err conftest.$ac_ext +-{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +-$as_echo "$ac_header_preproc" >&6; } +- +-# So? What about this header? +-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in +- yes:no: ) +- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 +-$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 +-$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} +- ac_header_preproc=yes +- ;; +- no:yes:* ) +- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 +-$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 +-$as_echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 +-$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 +-$as_echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 +-$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 +-$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} +- ( cat <<\_ASBOX +-## ---------------------------------------------------------------------------- ## +-## Report this to http://bugzilla.gnome.org/enter_bug.cgi?product=gnome-session ## +-## ---------------------------------------------------------------------------- ## +-_ASBOX +- ) | sed "s/^/$as_me: WARNING: /" >&2 +- ;; +-esac +-{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 +-$as_echo_n "checking for $ac_header... " >&6; } +-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then +- $as_echo_n "(cached) " >&6 ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_func_bind_textdomain_codeset" >&5 ++echo "${ECHO_T}$ac_cv_func_bind_textdomain_codeset" >&6; } ++if test $ac_cv_func_bind_textdomain_codeset = yes; then ++ CATOBJEXT=.gmo ++ DATADIRNAME=share + else +- eval "$as_ac_Header=\$ac_header_preproc" ++ CATOBJEXT=.mo ++ DATADIRNAME=lib ++fi ++ ++ ;; ++ *) ++ CATOBJEXT=.mo ++ DATADIRNAME=lib ++ ;; ++ esac ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++ LIBS="$glib_save_LIBS" ++ INSTOBJEXT=.mo ++ else ++ gt_cv_have_gettext=no ++ fi ++ fi ++ + fi +-ac_res=`eval 'as_val=${'$as_ac_Header'} +- $as_echo "$as_val"'` +- { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 +-$as_echo "$ac_res" >&6; } + +-fi +-if test `eval 'as_val=${'$as_ac_Header'} +- $as_echo "$as_val"'` = yes; then +- cat >>confdefs.h <<_ACEOF +-#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 +-_ACEOF + +-fi + +-done ++ if test "$gt_cv_have_gettext" = "yes" ; then ++ ++cat >>confdefs.h <<\_ACEOF ++#define ENABLE_NLS 1 ++_ACEOF ++ ++ fi ++ ++ if test "$XGETTEXT" != ":"; then ++ if $XGETTEXT --omit-header /dev/null 2> /dev/null; then ++ : ; ++ else ++ { echo "$as_me:$LINENO: result: found xgettext program is not GNU xgettext; ignore it" >&5 ++echo "${ECHO_T}found xgettext program is not GNU xgettext; ignore it" >&6; } ++ XGETTEXT=":" ++ fi ++ fi ++ ++ # We need to process the po/ directory. ++ POSUB=po ++ ++ ac_config_commands="$ac_config_commands default-1" ++ ++ ++ for lang in $ALL_LINGUAS; do ++ GMOFILES="$GMOFILES $lang.gmo" ++ POFILES="$POFILES $lang.po" ++ done ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ if test "$gt_cv_have_gettext" = "yes"; then ++ if test "x$ALL_LINGUAS" = "x"; then ++ LINGUAS= ++ else ++ { echo "$as_me:$LINENO: checking for catalogs to be installed" >&5 ++echo $ECHO_N "checking for catalogs to be installed... $ECHO_C" >&6; } ++ NEW_LINGUAS= ++ for presentlang in $ALL_LINGUAS; do ++ useit=no ++ if test "%UNSET%" != "${LINGUAS-%UNSET%}"; then ++ desiredlanguages="$LINGUAS" ++ else ++ desiredlanguages="$ALL_LINGUAS" ++ fi ++ for desiredlang in $desiredlanguages; do ++ # Use the presentlang catalog if desiredlang is ++ # a. equal to presentlang, or ++ # b. a variant of presentlang (because in this case, ++ # presentlang can be used as a fallback for messages ++ # which are not translated in the desiredlang catalog). ++ case "$desiredlang" in ++ "$presentlang"*) useit=yes;; ++ esac ++ done ++ if test $useit = yes; then ++ NEW_LINGUAS="$NEW_LINGUAS $presentlang" ++ fi ++ done ++ LINGUAS=$NEW_LINGUAS ++ { echo "$as_me:$LINENO: result: $LINGUAS" >&5 ++echo "${ECHO_T}$LINGUAS" >&6; } ++ fi ++ ++ if test -n "$LINGUAS"; then ++ for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done ++ fi ++ fi ++ ++ MKINSTALLDIRS= ++ if test -n "$ac_aux_dir"; then ++ MKINSTALLDIRS="$ac_aux_dir/mkinstalldirs" ++ fi ++ if test -z "$MKINSTALLDIRS"; then ++ MKINSTALLDIRS="\$(top_srcdir)/mkinstalldirs" ++ fi ++ ++ ++ test -d po || mkdir po ++ if test "x$srcdir" != "x."; then ++ if test "x`echo $srcdir | sed 's@/.*@@'`" = "x"; then ++ posrcprefix="$srcdir/" ++ else ++ posrcprefix="../$srcdir/" ++ fi ++ else ++ posrcprefix="../" ++ fi ++ rm -f po/POTFILES ++ sed -e "/^#/d" -e "/^\$/d" -e "s,.*, $posrcprefix& \\\\," -e "\$s/\(.*\) \\\\/\1/" \ ++ < $srcdir/po/POTFILES.in > po/POTFILES + +- if test $ac_cv_header_locale_h = yes; then +- { $as_echo "$as_me:$LINENO: checking for LC_MESSAGES" >&5 +-$as_echo_n "checking for LC_MESSAGES... " >&6; } +-if test "${am_cv_val_LC_MESSAGES+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ ++{ echo "$as_me:$LINENO: checking for ANSI C header files" >&5 ++echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6; } ++if test "${ac_cv_header_stdc+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ +@@ -25439,210 +17543,92 @@ + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ +-#include ++#include ++#include ++#include ++#include ++ + int + main () + { +-return LC_MESSAGES ++ + ; + return 0; + } + _ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then +- am_cv_val_LC_MESSAGES=yes +-else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- am_cv_val_LC_MESSAGES=no +-fi +- +-rm -rf conftest.dSYM +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext +-fi +-{ $as_echo "$as_me:$LINENO: result: $am_cv_val_LC_MESSAGES" >&5 +-$as_echo "$am_cv_val_LC_MESSAGES" >&6; } +- if test $am_cv_val_LC_MESSAGES = yes; then +- +-cat >>confdefs.h <<\_ACEOF +-#define HAVE_LC_MESSAGES 1 +-_ACEOF +- +- fi +- fi +- USE_NLS=yes +- +- +- gt_cv_have_gettext=no +- +- CATOBJEXT=NONE +- XGETTEXT=: +- INTLLIBS= +- +- if test "${ac_cv_header_libintl_h+set}" = set; then +- { $as_echo "$as_me:$LINENO: checking for libintl.h" >&5 +-$as_echo_n "checking for libintl.h... " >&6; } +-if test "${ac_cv_header_libintl_h+set}" = set; then +- $as_echo_n "(cached) " >&6 +-fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_libintl_h" >&5 +-$as_echo "$ac_cv_header_libintl_h" >&6; } +-else +- # Is the header compilable? +-{ $as_echo "$as_me:$LINENO: checking libintl.h usability" >&5 +-$as_echo_n "checking libintl.h usability... " >&6; } +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-$ac_includes_default +-#include +-_ACEOF + rm -f conftest.$ac_objext + if { (ac_try="$ac_compile" + case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then +- ac_header_compiler=yes ++ ac_cv_header_stdc=yes + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +- ac_header_compiler=no ++ ac_cv_header_stdc=no + fi + + rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +-{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +-$as_echo "$ac_header_compiler" >&6; } + +-# Is the header present? +-{ $as_echo "$as_me:$LINENO: checking libintl.h presence" >&5 +-$as_echo_n "checking libintl.h presence... " >&6; } +-cat >conftest.$ac_ext <<_ACEOF ++if test $ac_cv_header_stdc = yes; then ++ # SunOS 4.x string.h does not declare mem*, contrary to ANSI. ++ cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ +-#include ++#include ++ + _ACEOF +-if { (ac_try="$ac_cpp conftest.$ac_ext" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } >/dev/null && { +- test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || +- test ! -s conftest.err +- }; then +- ac_header_preproc=yes ++if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | ++ $EGREP "memchr" >/dev/null 2>&1; then ++ : + else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++ ac_cv_header_stdc=no ++fi ++rm -f conftest* + +- ac_header_preproc=no + fi + +-rm -f conftest.err conftest.$ac_ext +-{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +-$as_echo "$ac_header_preproc" >&6; } ++if test $ac_cv_header_stdc = yes; then ++ # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++#include + +-# So? What about this header? +-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in +- yes:no: ) +- { $as_echo "$as_me:$LINENO: WARNING: libintl.h: accepted by the compiler, rejected by the preprocessor!" >&5 +-$as_echo "$as_me: WARNING: libintl.h: accepted by the compiler, rejected by the preprocessor!" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: libintl.h: proceeding with the compiler's result" >&5 +-$as_echo "$as_me: WARNING: libintl.h: proceeding with the compiler's result" >&2;} +- ac_header_preproc=yes +- ;; +- no:yes:* ) +- { $as_echo "$as_me:$LINENO: WARNING: libintl.h: present but cannot be compiled" >&5 +-$as_echo "$as_me: WARNING: libintl.h: present but cannot be compiled" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: libintl.h: check for missing prerequisite headers?" >&5 +-$as_echo "$as_me: WARNING: libintl.h: check for missing prerequisite headers?" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: libintl.h: see the Autoconf documentation" >&5 +-$as_echo "$as_me: WARNING: libintl.h: see the Autoconf documentation" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: libintl.h: section \"Present But Cannot Be Compiled\"" >&5 +-$as_echo "$as_me: WARNING: libintl.h: section \"Present But Cannot Be Compiled\"" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: libintl.h: proceeding with the preprocessor's result" >&5 +-$as_echo "$as_me: WARNING: libintl.h: proceeding with the preprocessor's result" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: libintl.h: in the future, the compiler will take precedence" >&5 +-$as_echo "$as_me: WARNING: libintl.h: in the future, the compiler will take precedence" >&2;} +- ( cat <<\_ASBOX +-## ---------------------------------------------------------------------------- ## +-## Report this to http://bugzilla.gnome.org/enter_bug.cgi?product=gnome-session ## +-## ---------------------------------------------------------------------------- ## +-_ASBOX +- ) | sed "s/^/$as_me: WARNING: /" >&2 +- ;; +-esac +-{ $as_echo "$as_me:$LINENO: checking for libintl.h" >&5 +-$as_echo_n "checking for libintl.h... " >&6; } +-if test "${ac_cv_header_libintl_h+set}" = set; then +- $as_echo_n "(cached) " >&6 ++_ACEOF ++if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | ++ $EGREP "free" >/dev/null 2>&1; then ++ : + else +- ac_cv_header_libintl_h=$ac_header_preproc ++ ac_cv_header_stdc=no + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_libintl_h" >&5 +-$as_echo "$ac_cv_header_libintl_h" >&6; } ++rm -f conftest* + + fi +-if test $ac_cv_header_libintl_h = yes; then +- gt_cv_func_dgettext_libintl="no" +- libintl_extra_libs="" + +- # +- # First check in libc +- # +- { $as_echo "$as_me:$LINENO: checking for ngettext in libc" >&5 +-$as_echo_n "checking for ngettext in libc... " >&6; } +-if test "${gt_cv_func_ngettext_libc+set}" = set; then +- $as_echo_n "(cached) " >&6 ++if test $ac_cv_header_stdc = yes; then ++ # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. ++ if test "$cross_compiling" = yes; then ++ : + else + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ +@@ -25650,449 +17636,462 @@ + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ ++#include ++#include ++#if ((' ' & 0x0FF) == 0x020) ++# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') ++# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) ++#else ++# define ISLOWER(c) \ ++ (('a' <= (c) && (c) <= 'i') \ ++ || ('j' <= (c) && (c) <= 'r') \ ++ || ('s' <= (c) && (c) <= 'z')) ++# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) ++#endif + +-#include +- ++#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) + int + main () + { +-return !ngettext ("","", 1) +- ; ++ int i; ++ for (i = 0; i < 256; i++) ++ if (XOR (islower (i), ISLOWER (i)) ++ || toupper (i) != TOUPPER (i)) ++ return 2; + return 0; + } + _ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext ++rm -f conftest$ac_exeext + if { (ac_try="$ac_link" + case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_link") 2>conftest.er1 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>&5 + ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then +- gt_cv_func_ngettext_libc=yes ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ac_try='./conftest$ac_exeext' ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; }; then ++ : + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: program exited with status $ac_status" >&5 ++echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +- gt_cv_func_ngettext_libc=no ++( exit $ac_status ) ++ac_cv_header_stdc=no ++fi ++rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext + fi + +-rm -rf conftest.dSYM +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext + + fi +-{ $as_echo "$as_me:$LINENO: result: $gt_cv_func_ngettext_libc" >&5 +-$as_echo "$gt_cv_func_ngettext_libc" >&6; } ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 ++echo "${ECHO_T}$ac_cv_header_stdc" >&6; } ++if test $ac_cv_header_stdc = yes; then + +- if test "$gt_cv_func_ngettext_libc" = "yes" ; then +- { $as_echo "$as_me:$LINENO: checking for dgettext in libc" >&5 +-$as_echo_n "checking for dgettext in libc... " >&6; } +-if test "${gt_cv_func_dgettext_libc+set}" = set; then +- $as_echo_n "(cached) " >&6 ++cat >>confdefs.h <<\_ACEOF ++#define STDC_HEADERS 1 ++_ACEOF ++ ++fi ++ ++ ++ ++ ++for ac_header in syslog.h tcpd.h sys/param.h ++do ++as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` ++if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then ++ { echo "$as_me:$LINENO: checking for $ac_header" >&5 ++echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } ++if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++fi ++ac_res=`eval echo '${'$as_ac_Header'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } + else +- cat >conftest.$ac_ext <<_ACEOF ++ # Is the header compilable? ++{ echo "$as_me:$LINENO: checking $ac_header usability" >&5 ++echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; } ++cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ +- +-#include +- +-int +-main () +-{ +-return !dgettext ("","") +- ; +- return 0; +-} ++$ac_includes_default ++#include <$ac_header> + _ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" ++rm -f conftest.$ac_objext ++if { (ac_try="$ac_compile" + case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_link") 2>conftest.er1 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then +- gt_cv_func_dgettext_libc=yes ++ } && test -s conftest.$ac_objext; then ++ ac_header_compiler=yes + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +- gt_cv_func_dgettext_libc=no +-fi +- +-rm -rf conftest.dSYM +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext +- ++ ac_header_compiler=no + fi +-{ $as_echo "$as_me:$LINENO: result: $gt_cv_func_dgettext_libc" >&5 +-$as_echo "$gt_cv_func_dgettext_libc" >&6; } +- fi + +- if test "$gt_cv_func_ngettext_libc" = "yes" ; then ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 ++echo "${ECHO_T}$ac_header_compiler" >&6; } + +-for ac_func in bind_textdomain_codeset +-do +-as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` +-{ $as_echo "$as_me:$LINENO: checking for $ac_func" >&5 +-$as_echo_n "checking for $ac_func... " >&6; } +-if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then +- $as_echo_n "(cached) " >&6 +-else +- cat >conftest.$ac_ext <<_ACEOF ++# Is the header present? ++{ echo "$as_me:$LINENO: checking $ac_header presence" >&5 ++echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; } ++cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ +-/* Define $ac_func to an innocuous variant, in case declares $ac_func. +- For example, HP-UX 11i declares gettimeofday. */ +-#define $ac_func innocuous_$ac_func +- +-/* System header to define __stub macros and hopefully few prototypes, +- which can conflict with char $ac_func (); below. +- Prefer to if __STDC__ is defined, since +- exists even on freestanding compilers. */ +- +-#ifdef __STDC__ +-# include +-#else +-# include +-#endif +- +-#undef $ac_func +- +-/* Override any GCC internal prototype to avoid an error. +- Use char because int might match the return type of a GCC +- builtin and then its argument prototype would still apply. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-char $ac_func (); +-/* The GNU C library defines this for functions which it implements +- to always fail with ENOSYS. Some functions are actually named +- something starting with __ and the normal name is an alias. */ +-#if defined __stub_$ac_func || defined __stub___$ac_func +-choke me +-#endif +- +-int +-main () +-{ +-return $ac_func (); +- ; +- return 0; +-} ++#include <$ac_header> + _ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" ++if { (ac_try="$ac_cpp conftest.$ac_ext" + case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_link") 2>conftest.er1 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } >/dev/null && { ++ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext + }; then +- eval "$as_ac_var=yes" ++ ac_header_preproc=yes + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +- eval "$as_ac_var=no" ++ ac_header_preproc=no + fi + +-rm -rf conftest.dSYM +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext ++rm -f conftest.err conftest.$ac_ext ++{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 ++echo "${ECHO_T}$ac_header_preproc" >&6; } ++ ++# So? What about this header? ++case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in ++ yes:no: ) ++ { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 ++echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} ++ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 ++echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} ++ ac_header_preproc=yes ++ ;; ++ no:yes:* ) ++ { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 ++echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} ++ { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 ++echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} ++ { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 ++echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} ++ { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 ++echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} ++ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 ++echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} ++ { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 ++echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} ++ ( cat <<\_ASBOX ++## ---------------------------------------------------------------------------- ## ++## Report this to http://bugzilla.gnome.org/enter_bug.cgi?product=gnome-session ## ++## ---------------------------------------------------------------------------- ## ++_ASBOX ++ ) | sed "s/^/$as_me: WARNING: /" >&2 ++ ;; ++esac ++{ echo "$as_me:$LINENO: checking for $ac_header" >&5 ++echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } ++if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ eval "$as_ac_Header=\$ac_header_preproc" ++fi ++ac_res=`eval echo '${'$as_ac_Header'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } ++ + fi +-ac_res=`eval 'as_val=${'$as_ac_var'} +- $as_echo "$as_val"'` +- { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 +-$as_echo "$ac_res" >&6; } +-if test `eval 'as_val=${'$as_ac_var'} +- $as_echo "$as_val"'` = yes; then ++if test `eval echo '${'$as_ac_Header'}'` = yes; then + cat >>confdefs.h <<_ACEOF +-#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 ++#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 + _ACEOF + + fi ++ + done + +- fi + +- # +- # If we don't have everything we want, check in libintl +- # +- if test "$gt_cv_func_dgettext_libc" != "yes" \ +- || test "$gt_cv_func_ngettext_libc" != "yes" \ +- || test "$ac_cv_func_bind_textdomain_codeset" != "yes" ; then ++oCFLAGS="$CFLAGS" ++CFLAGS="$CFLAGS $X_CFLAGS" + +- { $as_echo "$as_me:$LINENO: checking for bindtextdomain in -lintl" >&5 +-$as_echo_n "checking for bindtextdomain in -lintl... " >&6; } +-if test "${ac_cv_lib_intl_bindtextdomain+set}" = set; then +- $as_echo_n "(cached) " >&6 ++for ac_header in X11/Xtrans/Xtrans.h ++do ++as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` ++if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then ++ { echo "$as_me:$LINENO: checking for $ac_header" >&5 ++echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } ++if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++fi ++ac_res=`eval echo '${'$as_ac_Header'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } + else +- ac_check_lib_save_LIBS=$LIBS +-LIBS="-lintl $LIBS" ++ # Is the header compilable? ++{ echo "$as_me:$LINENO: checking $ac_header usability" >&5 ++echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; } + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ +- +-/* Override any GCC internal prototype to avoid an error. +- Use char because int might match the return type of a GCC +- builtin and then its argument prototype would still apply. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-char bindtextdomain (); +-int +-main () +-{ +-return bindtextdomain (); +- ; +- return 0; +-} ++$ac_includes_default ++#include <$ac_header> + _ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" ++rm -f conftest.$ac_objext ++if { (ac_try="$ac_compile" + case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_link") 2>conftest.er1 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then +- ac_cv_lib_intl_bindtextdomain=yes ++ } && test -s conftest.$ac_objext; then ++ ac_header_compiler=yes + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +- ac_cv_lib_intl_bindtextdomain=no ++ ac_header_compiler=no + fi + +-rm -rf conftest.dSYM +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext +-LIBS=$ac_check_lib_save_LIBS +-fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_intl_bindtextdomain" >&5 +-$as_echo "$ac_cv_lib_intl_bindtextdomain" >&6; } +-if test $ac_cv_lib_intl_bindtextdomain = yes; then +- { $as_echo "$as_me:$LINENO: checking for ngettext in -lintl" >&5 +-$as_echo_n "checking for ngettext in -lintl... " >&6; } +-if test "${ac_cv_lib_intl_ngettext+set}" = set; then +- $as_echo_n "(cached) " >&6 +-else +- ac_check_lib_save_LIBS=$LIBS +-LIBS="-lintl $LIBS" ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 ++echo "${ECHO_T}$ac_header_compiler" >&6; } ++ ++# Is the header present? ++{ echo "$as_me:$LINENO: checking $ac_header presence" >&5 ++echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; } + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ +- +-/* Override any GCC internal prototype to avoid an error. +- Use char because int might match the return type of a GCC +- builtin and then its argument prototype would still apply. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-char ngettext (); +-int +-main () +-{ +-return ngettext (); +- ; +- return 0; +-} ++#include <$ac_header> + _ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" ++if { (ac_try="$ac_cpp conftest.$ac_ext" + case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_link") 2>conftest.er1 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } >/dev/null && { ++ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext + }; then +- ac_cv_lib_intl_ngettext=yes ++ ac_header_preproc=yes + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +- ac_cv_lib_intl_ngettext=no ++ ac_header_preproc=no + fi + +-rm -rf conftest.dSYM +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext +-LIBS=$ac_check_lib_save_LIBS ++rm -f conftest.err conftest.$ac_ext ++{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 ++echo "${ECHO_T}$ac_header_preproc" >&6; } ++ ++# So? What about this header? ++case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in ++ yes:no: ) ++ { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 ++echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} ++ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 ++echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} ++ ac_header_preproc=yes ++ ;; ++ no:yes:* ) ++ { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 ++echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} ++ { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 ++echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} ++ { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 ++echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} ++ { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 ++echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} ++ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 ++echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} ++ { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 ++echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} ++ ( cat <<\_ASBOX ++## ---------------------------------------------------------------------------- ## ++## Report this to http://bugzilla.gnome.org/enter_bug.cgi?product=gnome-session ## ++## ---------------------------------------------------------------------------- ## ++_ASBOX ++ ) | sed "s/^/$as_me: WARNING: /" >&2 ++ ;; ++esac ++{ echo "$as_me:$LINENO: checking for $ac_header" >&5 ++echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } ++if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ eval "$as_ac_Header=\$ac_header_preproc" + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_intl_ngettext" >&5 +-$as_echo "$ac_cv_lib_intl_ngettext" >&6; } +-if test $ac_cv_lib_intl_ngettext = yes; then +- { $as_echo "$as_me:$LINENO: checking for dgettext in -lintl" >&5 +-$as_echo_n "checking for dgettext in -lintl... " >&6; } +-if test "${ac_cv_lib_intl_dgettext+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ac_res=`eval echo '${'$as_ac_Header'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } ++ ++fi ++if test `eval echo '${'$as_ac_Header'}'` = yes; then ++ cat >>confdefs.h <<_ACEOF ++#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 ++_ACEOF ++ ++fi ++ ++done ++ ++CFLAGS="$oCFLAGS" ++ ++{ echo "$as_me:$LINENO: checking whether to enable ipv6" >&5 ++echo $ECHO_N "checking whether to enable ipv6... $ECHO_C" >&6; } ++# Check whether --enable-ipv6 was given. ++if test "${enable_ipv6+set}" = set; then ++ enableval=$enable_ipv6; + else +- ac_check_lib_save_LIBS=$LIBS +-LIBS="-lintl $LIBS" +-cat >conftest.$ac_ext <<_ACEOF ++ enable_ipv6=yes ++fi ++ ++if test $enable_ipv6 = yes; then ++ ++ cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + +-/* Override any GCC internal prototype to avoid an error. +- Use char because int might match the return type of a GCC +- builtin and then its argument prototype would still apply. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-char dgettext (); ++ #include ++ #include + int + main () + { +-return dgettext (); ++ ++ socket(AF_INET6, SOCK_STREAM, 0) ++ + ; + return 0; + } +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" ++_ACEOF ++rm -f conftest.$ac_objext ++if { (ac_try="$ac_compile" + case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_link") 2>conftest.er1 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then +- ac_cv_lib_intl_dgettext=yes ++ } && test -s conftest.$ac_objext; then ++ have_ipv6=yes + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +- ac_cv_lib_intl_dgettext=no +-fi +- +-rm -rf conftest.dSYM +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext +-LIBS=$ac_check_lib_save_LIBS +-fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_intl_dgettext" >&5 +-$as_echo "$ac_cv_lib_intl_dgettext" >&6; } +-if test $ac_cv_lib_intl_dgettext = yes; then +- gt_cv_func_dgettext_libintl=yes +-fi +- +-fi ++ have_ipv6=no + + fi + ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++ { echo "$as_me:$LINENO: result: $have_ipv6" >&5 ++echo "${ECHO_T}$have_ipv6" >&6; } + +- if test "$gt_cv_func_dgettext_libintl" != "yes" ; then +- { $as_echo "$as_me:$LINENO: checking if -liconv is needed to use gettext" >&5 +-$as_echo_n "checking if -liconv is needed to use gettext... " >&6; } +- { $as_echo "$as_me:$LINENO: result: " >&5 +-$as_echo "" >&6; } +- { $as_echo "$as_me:$LINENO: checking for ngettext in -lintl" >&5 +-$as_echo_n "checking for ngettext in -lintl... " >&6; } +-if test "${ac_cv_lib_intl_ngettext+set}" = set; then +- $as_echo_n "(cached) " >&6 ++ have_getaddrinfo=no ++ if test $have_ipv6=yes; then ++ { echo "$as_me:$LINENO: checking for getaddrinfo" >&5 ++echo $ECHO_N "checking for getaddrinfo... $ECHO_C" >&6; } ++if test "${ac_cv_func_getaddrinfo+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- ac_check_lib_save_LIBS=$LIBS +-LIBS="-lintl -liconv $LIBS" +-cat >conftest.$ac_ext <<_ACEOF ++ cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ ++/* Define getaddrinfo to an innocuous variant, in case declares getaddrinfo. ++ For example, HP-UX 11i declares gettimeofday. */ ++#define getaddrinfo innocuous_getaddrinfo ++ ++/* System header to define __stub macros and hopefully few prototypes, ++ which can conflict with char getaddrinfo (); below. ++ Prefer to if __STDC__ is defined, since ++ exists even on freestanding compilers. */ ++ ++#ifdef __STDC__ ++# include ++#else ++# include ++#endif ++ ++#undef getaddrinfo + + /* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC +@@ -26100,11 +18099,18 @@ + #ifdef __cplusplus + extern "C" + #endif +-char ngettext (); ++char getaddrinfo (); ++/* The GNU C library defines this for functions which it implements ++ to always fail with ENOSYS. Some functions are actually named ++ something starting with __ and the normal name is an alias. */ ++#if defined __stub_getaddrinfo || defined __stub___getaddrinfo ++choke me ++#endif ++ + int + main () + { +-return ngettext (); ++return getaddrinfo (); + ; + return 0; + } +@@ -26115,44 +18121,46 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then +- ac_cv_lib_intl_ngettext=yes ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_func_getaddrinfo=yes + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +- ac_cv_lib_intl_ngettext=no ++ ac_cv_func_getaddrinfo=no + fi + +-rm -rf conftest.dSYM + rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +-LIBS=$ac_check_lib_save_LIBS + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_intl_ngettext" >&5 +-$as_echo "$ac_cv_lib_intl_ngettext" >&6; } +-if test $ac_cv_lib_intl_ngettext = yes; then +- { $as_echo "$as_me:$LINENO: checking for dcgettext in -lintl" >&5 +-$as_echo_n "checking for dcgettext in -lintl... " >&6; } +-if test "${ac_cv_lib_intl_dcgettext+set}" = set; then +- $as_echo_n "(cached) " >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_func_getaddrinfo" >&5 ++echo "${ECHO_T}$ac_cv_func_getaddrinfo" >&6; } ++if test $ac_cv_func_getaddrinfo = yes; then ++ have_getaddrinfo=yes ++fi ++ ++ if test $have_getaddrinfo != yes; then ++ # getaddrinfo is not in the default libraries. See if it's in some other. ++ for lib in bsd socket inet; do ++ as_ac_Lib=`echo "ac_cv_lib_$lib''_getaddrinfo" | $as_tr_sh` ++{ echo "$as_me:$LINENO: checking for getaddrinfo in -l$lib" >&5 ++echo $ECHO_N "checking for getaddrinfo in -l$lib... $ECHO_C" >&6; } ++if { as_var=$as_ac_Lib; eval "test \"\${$as_var+set}\" = set"; }; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + ac_check_lib_save_LIBS=$LIBS +-LIBS="-lintl -liconv $LIBS" ++LIBS="-l$lib $LIBS" + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -26166,11 +18174,11 @@ + #ifdef __cplusplus + extern "C" + #endif +-char dcgettext (); ++char getaddrinfo (); + int + main () + { +-return dcgettext (); ++return getaddrinfo (); + ; + return 0; + } +@@ -26181,3001 +18189,2616 @@ + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then +- ac_cv_lib_intl_dcgettext=yes ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ eval "$as_ac_Lib=yes" + else +- $as_echo "$as_me: failed program was:" >&5 ++ echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +- ac_cv_lib_intl_dcgettext=no ++ eval "$as_ac_Lib=no" + fi + +-rm -rf conftest.dSYM + rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_intl_dcgettext" >&5 +-$as_echo "$ac_cv_lib_intl_dcgettext" >&6; } +-if test $ac_cv_lib_intl_dcgettext = yes; then +- gt_cv_func_dgettext_libintl=yes +- libintl_extra_libs=-liconv +-else +- : ++ac_res=`eval echo '${'$as_ac_Lib'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } ++if test `eval echo '${'$as_ac_Lib'}'` = yes; then ++ LIBS="$LIBS -l$lib";have_getaddrinfo=yes; break ++fi ++ ++ done ++ fi ++ if test $have_getaddrinfo=yes; then ++ ++cat >>confdefs.h <<\_ACEOF ++#define ENABLE_IPV6 1 ++_ACEOF ++ ++ fi ++ fi + fi + ++# Don't use AC_PROG_AWK since we need the full pathname. ++for ac_prog in mawk gawk nawk awk ++do ++ # Extract the first word of "$ac_prog", so it can be a program name with args. ++set dummy $ac_prog; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_path_AWK+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- : ++ case $AWK in ++ [\\/]* | ?:[\\/]*) ++ ac_cv_path_AWK="$AWK" # Let the user override the test with a path. ++ ;; ++ *) ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_path_AWK="$as_dir/$ac_word$ac_exec_ext" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++ ;; ++esac ++fi ++AWK=$ac_cv_path_AWK ++if test -n "$AWK"; then ++ { echo "$as_me:$LINENO: result: $AWK" >&5 ++echo "${ECHO_T}$AWK" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + +- fi + +- # +- # If we found libintl, then check in it for bind_textdomain_codeset(); +- # we'll prefer libc if neither have bind_textdomain_codeset(), +- # and both have dgettext and ngettext +- # +- if test "$gt_cv_func_dgettext_libintl" = "yes" ; then +- glib_save_LIBS="$LIBS" +- LIBS="$LIBS -lintl $libintl_extra_libs" +- unset ac_cv_func_bind_textdomain_codeset ++ test -n "$AWK" && break ++done + +-for ac_func in bind_textdomain_codeset ++for ac_prog in perl5 perl + do +-as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` +-{ $as_echo "$as_me:$LINENO: checking for $ac_func" >&5 +-$as_echo_n "checking for $ac_func... " >&6; } +-if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then +- $as_echo_n "(cached) " >&6 ++ # Extract the first word of "$ac_prog", so it can be a program name with args. ++set dummy $ac_prog; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_path_PERL+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-/* Define $ac_func to an innocuous variant, in case declares $ac_func. +- For example, HP-UX 11i declares gettimeofday. */ +-#define $ac_func innocuous_$ac_func ++ case $PERL in ++ [\\/]* | ?:[\\/]*) ++ ac_cv_path_PERL="$PERL" # Let the user override the test with a path. ++ ;; ++ *) ++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_path_PERL="$as_dir/$ac_word$ac_exec_ext" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS + +-/* System header to define __stub macros and hopefully few prototypes, +- which can conflict with char $ac_func (); below. +- Prefer to if __STDC__ is defined, since +- exists even on freestanding compilers. */ ++ ;; ++esac ++fi ++PERL=$ac_cv_path_PERL ++if test -n "$PERL"; then ++ { echo "$as_me:$LINENO: result: $PERL" >&5 ++echo "${ECHO_T}$PERL" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi + +-#ifdef __STDC__ +-# include +-#else +-# include +-#endif + +-#undef $ac_func ++ test -n "$PERL" && break ++done + +-/* Override any GCC internal prototype to avoid an error. +- Use char because int might match the return type of a GCC +- builtin and then its argument prototype would still apply. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-char $ac_func (); +-/* The GNU C library defines this for functions which it implements +- to always fail with ENOSYS. Some functions are actually named +- something starting with __ and the normal name is an alias. */ +-#if defined __stub_$ac_func || defined __stub___$ac_func +-choke me +-#endif + +-int +-main () +-{ +-return $ac_func (); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then +- eval "$as_ac_var=yes" ++# define a MAINT-like variable REBUILD which is set if Perl ++# and awk are found, so autogenerated sources can be rebuilt ++# Check whether --enable-rebuilds was given. ++if test "${enable_rebuilds+set}" = set; then ++ enableval=$enable_rebuilds; + else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++ enable_rebuilds=yes ++fi ++ ++REBUILD=\# ++if test "x$enable_rebuilds" = "xyes" && \ ++ test -n "$PERL" && \ ++ $PERL -e 'exit !($] >= 5.002)' > /dev/null 2>&1 && \ ++ test -n "$AWK" ; then ++ REBUILD= ++fi ++ ++ ++ac_config_files="$ac_config_files Makefile capplet/Makefile compat/Makefile compat/at-spi-registryd-wrapper.desktop.in.in compat/gnome-settings-daemon-helper.desktop.in.in doc/Makefile doc/dbus/Makefile doc/dbus/gnome-session.xml doc/man/Makefile doc/man/gnome-session.1 doc/man/default.session.5 data/Makefile data/gnome-wm.desktop.in data/session-properties.desktop.in data/icons/Makefile data/icons/16x16/Makefile data/icons/22x22/Makefile data/icons/24x24/Makefile data/icons/32x32/Makefile data/icons/48x48/Makefile data/icons/scalable/Makefile egg/Makefile gnome-session/Makefile splash/Makefile splash/gnome-session-splash.desktop.in.in tools/Makefile po/Makefile.in" + +- eval "$as_ac_var=no" +-fi ++cat >confcache <<\_ACEOF ++# This file is a shell script that caches the results of configure ++# tests run on this system so they can be shared between configure ++# scripts and configure runs, see configure's option --config-cache. ++# It is not useful on other systems. If it contains results you don't ++# want to keep, you may remove or edit it. ++# ++# config.status only pays attention to the cache file if you give it ++# the --recheck option to rerun configure. ++# ++# `ac_cv_env_foo' variables (set or unset) will be overridden when ++# loading this file, other *unset* `ac_cv_foo' will be assigned the ++# following values. + +-rm -rf conftest.dSYM +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext +-fi +-ac_res=`eval 'as_val=${'$as_ac_var'} +- $as_echo "$as_val"'` +- { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 +-$as_echo "$ac_res" >&6; } +-if test `eval 'as_val=${'$as_ac_var'} +- $as_echo "$as_val"'` = yes; then +- cat >>confdefs.h <<_ACEOF +-#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 + _ACEOF + +-fi +-done ++# The following way of writing the cache mishandles newlines in values, ++# but we know of no workaround that is simple, portable, and efficient. ++# So, we kill variables containing newlines. ++# Ultrix sh set writes to stderr and can't be redirected directly, ++# and sets the high bit in the cache file unless we assign to the vars. ++( ++ for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do ++ eval ac_val=\$$ac_var ++ case $ac_val in #( ++ *${as_nl}*) ++ case $ac_var in #( ++ *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5 ++echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;; ++ esac ++ case $ac_var in #( ++ _ | IFS | as_nl) ;; #( ++ *) $as_unset $ac_var ;; ++ esac ;; ++ esac ++ done + +- LIBS="$glib_save_LIBS" ++ (set) 2>&1 | ++ case $as_nl`(ac_space=' '; set) 2>&1` in #( ++ *${as_nl}ac_space=\ *) ++ # `set' does not quote correctly, so add quotes (double-quote ++ # substitution turns \\\\ into \\, and sed turns \\ into \). ++ sed -n \ ++ "s/'/'\\\\''/g; ++ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" ++ ;; #( ++ *) ++ # `set' quotes correctly as required by POSIX, so do not add quotes. ++ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" ++ ;; ++ esac | ++ sort ++) | ++ sed ' ++ /^ac_cv_env_/b end ++ t clear ++ :clear ++ s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ ++ t end ++ s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ ++ :end' >>confcache ++if diff "$cache_file" confcache >/dev/null 2>&1; then :; else ++ if test -w "$cache_file"; then ++ test "x$cache_file" != "x/dev/null" && ++ { echo "$as_me:$LINENO: updating cache $cache_file" >&5 ++echo "$as_me: updating cache $cache_file" >&6;} ++ cat confcache >$cache_file ++ else ++ { echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5 ++echo "$as_me: not updating unwritable cache $cache_file" >&6;} ++ fi ++fi ++rm -f confcache + +- if test "$ac_cv_func_bind_textdomain_codeset" = "yes" ; then +- gt_cv_func_dgettext_libc=no +- else +- if test "$gt_cv_func_dgettext_libc" = "yes" \ +- && test "$gt_cv_func_ngettext_libc" = "yes"; then +- gt_cv_func_dgettext_libintl=no +- fi +- fi +- fi +- fi ++test "x$prefix" = xNONE && prefix=$ac_default_prefix ++# Let make expand exec_prefix. ++test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' + +- if test "$gt_cv_func_dgettext_libc" = "yes" \ +- || test "$gt_cv_func_dgettext_libintl" = "yes"; then +- gt_cv_have_gettext=yes +- fi ++DEFS=-DHAVE_CONFIG_H + +- if test "$gt_cv_func_dgettext_libintl" = "yes"; then +- INTLLIBS="-lintl $libintl_extra_libs" +- fi ++ac_libobjs= ++ac_ltlibobjs= ++for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue ++ # 1. Remove the extension, and $U if already installed. ++ ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' ++ ac_i=`echo "$ac_i" | sed "$ac_script"` ++ # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR ++ # will be set to the directory where LIBOBJS objects are built. ++ ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext" ++ ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo' ++done ++LIBOBJS=$ac_libobjs + +- if test "$gt_cv_have_gettext" = "yes"; then ++LTLIBOBJS=$ac_ltlibobjs + +-cat >>confdefs.h <<\_ACEOF +-#define HAVE_GETTEXT 1 +-_ACEOF + +- # Extract the first word of "msgfmt", so it can be a program name with args. +-set dummy msgfmt; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } +-if test "${ac_cv_path_MSGFMT+set}" = set; then +- $as_echo_n "(cached) " >&6 +-else +- case "$MSGFMT" in +- /*) +- ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path. +- ;; +- *) +- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" +- for ac_dir in $PATH; do +- test -z "$ac_dir" && ac_dir=. +- if test -f $ac_dir/$ac_word; then +- if test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"; then +- ac_cv_path_MSGFMT="$ac_dir/$ac_word" +- break +- fi +- fi +- done +- IFS="$ac_save_ifs" +- test -z "$ac_cv_path_MSGFMT" && ac_cv_path_MSGFMT="no" +- ;; +-esac ++if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then ++ { { echo "$as_me:$LINENO: error: conditional \"MAINTAINER_MODE\" was never defined. ++Usually this means the macro was only invoked conditionally." >&5 ++echo "$as_me: error: conditional \"MAINTAINER_MODE\" was never defined. ++Usually this means the macro was only invoked conditionally." >&2;} ++ { (exit 1); exit 1; }; } + fi +-MSGFMT="$ac_cv_path_MSGFMT" +-if test "$MSGFMT" != "no"; then +- { $as_echo "$as_me:$LINENO: result: $MSGFMT" >&5 +-$as_echo "$MSGFMT" >&6; } +-else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then ++ { { echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined. ++Usually this means the macro was only invoked conditionally." >&5 ++echo "$as_me: error: conditional \"AMDEP\" was never defined. ++Usually this means the macro was only invoked conditionally." >&2;} ++ { (exit 1); exit 1; }; } ++fi ++if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then ++ { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined. ++Usually this means the macro was only invoked conditionally." >&5 ++echo "$as_me: error: conditional \"am__fastdepCC\" was never defined. ++Usually this means the macro was only invoked conditionally." >&2;} ++ { (exit 1); exit 1; }; } + fi +- if test "$MSGFMT" != "no"; then +- glib_save_LIBS="$LIBS" +- LIBS="$LIBS $INTLLIBS" +- +-for ac_func in dcgettext +-do +-as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` +-{ $as_echo "$as_me:$LINENO: checking for $ac_func" >&5 +-$as_echo_n "checking for $ac_func... " >&6; } +-if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then +- $as_echo_n "(cached) " >&6 +-else +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-/* Define $ac_func to an innocuous variant, in case declares $ac_func. +- For example, HP-UX 11i declares gettimeofday. */ +-#define $ac_func innocuous_$ac_func + +-/* System header to define __stub macros and hopefully few prototypes, +- which can conflict with char $ac_func (); below. +- Prefer to if __STDC__ is defined, since +- exists even on freestanding compilers. */ ++ ac_config_commands="$ac_config_commands po/stamp-it" + +-#ifdef __STDC__ +-# include +-#else +-# include +-#endif + +-#undef $ac_func ++if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then ++ { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined. ++Usually this means the macro was only invoked conditionally." >&5 ++echo "$as_me: error: conditional \"am__fastdepCC\" was never defined. ++Usually this means the macro was only invoked conditionally." >&2;} ++ { (exit 1); exit 1; }; } ++fi ++if test -z "${GCONF_SCHEMAS_INSTALL_TRUE}" && test -z "${GCONF_SCHEMAS_INSTALL_FALSE}"; then ++ { { echo "$as_me:$LINENO: error: conditional \"GCONF_SCHEMAS_INSTALL\" was never defined. ++Usually this means the macro was only invoked conditionally." >&5 ++echo "$as_me: error: conditional \"GCONF_SCHEMAS_INSTALL\" was never defined. ++Usually this means the macro was only invoked conditionally." >&2;} ++ { (exit 1); exit 1; }; } ++fi ++if test -z "${HAVE_XRENDER_TRUE}" && test -z "${HAVE_XRENDER_FALSE}"; then ++ { { echo "$as_me:$LINENO: error: conditional \"HAVE_XRENDER\" was never defined. ++Usually this means the macro was only invoked conditionally." >&5 ++echo "$as_me: error: conditional \"HAVE_XRENDER\" was never defined. ++Usually this means the macro was only invoked conditionally." >&2;} ++ { (exit 1); exit 1; }; } ++fi ++if test -z "${DOCBOOK_DOCS_ENABLED_TRUE}" && test -z "${DOCBOOK_DOCS_ENABLED_FALSE}"; then ++ { { echo "$as_me:$LINENO: error: conditional \"DOCBOOK_DOCS_ENABLED\" was never defined. ++Usually this means the macro was only invoked conditionally." >&5 ++echo "$as_me: error: conditional \"DOCBOOK_DOCS_ENABLED\" was never defined. ++Usually this means the macro was only invoked conditionally." >&2;} ++ { (exit 1); exit 1; }; } ++fi + +-/* Override any GCC internal prototype to avoid an error. +- Use char because int might match the return type of a GCC +- builtin and then its argument prototype would still apply. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-char $ac_func (); +-/* The GNU C library defines this for functions which it implements +- to always fail with ENOSYS. Some functions are actually named +- something starting with __ and the normal name is an alias. */ +-#if defined __stub_$ac_func || defined __stub___$ac_func +-choke me +-#endif ++: ${CONFIG_STATUS=./config.status} ++ac_clean_files_save=$ac_clean_files ++ac_clean_files="$ac_clean_files $CONFIG_STATUS" ++{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5 ++echo "$as_me: creating $CONFIG_STATUS" >&6;} ++cat >$CONFIG_STATUS <<_ACEOF ++#! $SHELL ++# Generated by $as_me. ++# Run this file to recreate the current configuration. ++# Compiler output produced by configure, useful for debugging ++# configure, is in config.log if it exists. + +-int +-main () +-{ +-return $ac_func (); +- ; +- return 0; +-} ++debug=false ++ac_cs_recheck=false ++ac_cs_silent=false ++SHELL=\${CONFIG_SHELL-$SHELL} + _ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then +- eval "$as_ac_var=yes" ++ ++cat >>$CONFIG_STATUS <<\_ACEOF ++## --------------------- ## ++## M4sh Initialization. ## ++## --------------------- ## ++ ++# Be more Bourne compatible ++DUALCASE=1; export DUALCASE # for MKS sh ++if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then ++ emulate sh ++ NULLCMD=: ++ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which ++ # is contrary to our usage. Disable this feature. ++ alias -g '${1+"$@"}'='"$@"' ++ setopt NO_GLOB_SUBST + else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++ case `(set -o) 2>/dev/null` in ++ *posix*) set -o posix ;; ++esac + +- eval "$as_ac_var=no" + fi + +-rm -rf conftest.dSYM +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext +-fi +-ac_res=`eval 'as_val=${'$as_ac_var'} +- $as_echo "$as_val"'` +- { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 +-$as_echo "$ac_res" >&6; } +-if test `eval 'as_val=${'$as_ac_var'} +- $as_echo "$as_val"'` = yes; then +- cat >>confdefs.h <<_ACEOF +-#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 +-_ACEOF + +-fi +-done + +- MSGFMT_OPTS= +- { $as_echo "$as_me:$LINENO: checking if msgfmt accepts -c" >&5 +-$as_echo_n "checking if msgfmt accepts -c... " >&6; } +- cat >conftest.foo <<_ACEOF + +-msgid "" +-msgstr "" +-"Content-Type: text/plain; charset=UTF-8\n" +-"Project-Id-Version: test 1.0\n" +-"PO-Revision-Date: 2007-02-15 12:01+0100\n" +-"Last-Translator: test \n" +-"Language-Team: C \n" +-"MIME-Version: 1.0\n" +-"Content-Transfer-Encoding: 8bit\n" ++# PATH needs CR ++# Avoid depending upon Character Ranges. ++as_cr_letters='abcdefghijklmnopqrstuvwxyz' ++as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' ++as_cr_Letters=$as_cr_letters$as_cr_LETTERS ++as_cr_digits='0123456789' ++as_cr_alnum=$as_cr_Letters$as_cr_digits + +-_ACEOF +-if { ($as_echo "$as_me:$LINENO: \$MSGFMT -c -o /dev/null conftest.foo") >&5 +- ($MSGFMT -c -o /dev/null conftest.foo) 2>&5 +- ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then +- MSGFMT_OPTS=-c; { $as_echo "$as_me:$LINENO: result: yes" >&5 +-$as_echo "yes" >&6; } +-else { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } +-echo "$as_me: failed input was:" >&5 +-sed 's/^/| /' conftest.foo >&5 ++# The user is always right. ++if test "${PATH_SEPARATOR+set}" != set; then ++ echo "#! /bin/sh" >conf$$.sh ++ echo "exit 0" >>conf$$.sh ++ chmod +x conf$$.sh ++ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then ++ PATH_SEPARATOR=';' ++ else ++ PATH_SEPARATOR=: ++ fi ++ rm -f conf$$.sh + fi + +- # Extract the first word of "gmsgfmt", so it can be a program name with args. +-set dummy gmsgfmt; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } +-if test "${ac_cv_path_GMSGFMT+set}" = set; then +- $as_echo_n "(cached) " >&6 ++# Support unset when possible. ++if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then ++ as_unset=unset + else +- case $GMSGFMT in +- [\\/]* | ?:[\\/]*) +- ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path. +- ;; +- *) +- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++ as_unset=false ++fi ++ ++ ++# IFS ++# We need space, tab and new line, in precisely that order. Quoting is ++# there to prevent editors from complaining about space-tab. ++# (If _AS_PATH_WALK were called with IFS unset, it would disable word ++# splitting by setting IFS to empty value.) ++as_nl=' ++' ++IFS=" "" $as_nl" ++ ++# Find who we are. Look in the path if we contain no directory separator. ++case $0 in ++ *[\\/]* ) as_myself=$0 ;; ++ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + for as_dir in $PATH + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do +- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then +- ac_cv_path_GMSGFMT="$as_dir/$ac_word$ac_exec_ext" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 +- break 2 +- fi +-done ++ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break + done + IFS=$as_save_IFS + +- test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT" +- ;; ++ ;; + esac ++# We did not find ourselves, most probably we were run as `sh COMMAND' ++# in which case we are not to be found in the path. ++if test "x$as_myself" = x; then ++ as_myself=$0 + fi +-GMSGFMT=$ac_cv_path_GMSGFMT +-if test -n "$GMSGFMT"; then +- { $as_echo "$as_me:$LINENO: result: $GMSGFMT" >&5 +-$as_echo "$GMSGFMT" >&6; } +-else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++if test ! -f "$as_myself"; then ++ echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 ++ { (exit 1); exit 1; } + fi + ++# Work around bugs in pre-3.0 UWIN ksh. ++for as_var in ENV MAIL MAILPATH ++do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var ++done ++PS1='$ ' ++PS2='> ' ++PS4='+ ' ++ ++# NLS nuisances. ++for as_var in \ ++ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ ++ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ ++ LC_TELEPHONE LC_TIME ++do ++ if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then ++ eval $as_var=C; export $as_var ++ else ++ ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var ++ fi ++done + +- # Extract the first word of "xgettext", so it can be a program name with args. +-set dummy xgettext; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } +-if test "${ac_cv_path_XGETTEXT+set}" = set; then +- $as_echo_n "(cached) " >&6 ++# Required to use basename. ++if expr a : '\(a\)' >/dev/null 2>&1 && ++ test "X`expr 00001 : '.*\(...\)'`" = X001; then ++ as_expr=expr + else +- case "$XGETTEXT" in +- /*) +- ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path. +- ;; +- *) +- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" +- for ac_dir in $PATH; do +- test -z "$ac_dir" && ac_dir=. +- if test -f $ac_dir/$ac_word; then +- if test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"; then +- ac_cv_path_XGETTEXT="$ac_dir/$ac_word" +- break +- fi +- fi +- done +- IFS="$ac_save_ifs" +- test -z "$ac_cv_path_XGETTEXT" && ac_cv_path_XGETTEXT=":" +- ;; +-esac ++ as_expr=false + fi +-XGETTEXT="$ac_cv_path_XGETTEXT" +-if test "$XGETTEXT" != ":"; then +- { $as_echo "$as_me:$LINENO: result: $XGETTEXT" >&5 +-$as_echo "$XGETTEXT" >&6; } ++ ++if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then ++ as_basename=basename + else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } ++ as_basename=false + fi + +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ + +-int +-main () +-{ +-extern int _nl_msg_cat_cntr; +- return _nl_msg_cat_cntr +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then +- CATOBJEXT=.gmo +- DATADIRNAME=share +-else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++# Name of the executable. ++as_me=`$as_basename -- "$0" || ++$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ ++ X"$0" : 'X\(//\)$' \| \ ++ X"$0" : 'X\(/\)' \| . 2>/dev/null || ++echo X/"$0" | ++ sed '/^.*\/\([^/][^/]*\)\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\/\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\/\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` + +- case $host in +- *-*-solaris*) +- { $as_echo "$as_me:$LINENO: checking for bind_textdomain_codeset" >&5 +-$as_echo_n "checking for bind_textdomain_codeset... " >&6; } +-if test "${ac_cv_func_bind_textdomain_codeset+set}" = set; then +- $as_echo_n "(cached) " >&6 +-else +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-/* Define bind_textdomain_codeset to an innocuous variant, in case declares bind_textdomain_codeset. +- For example, HP-UX 11i declares gettimeofday. */ +-#define bind_textdomain_codeset innocuous_bind_textdomain_codeset ++# CDPATH. ++$as_unset CDPATH + +-/* System header to define __stub macros and hopefully few prototypes, +- which can conflict with char bind_textdomain_codeset (); below. +- Prefer to if __STDC__ is defined, since +- exists even on freestanding compilers. */ + +-#ifdef __STDC__ +-# include +-#else +-# include +-#endif + +-#undef bind_textdomain_codeset ++ as_lineno_1=$LINENO ++ as_lineno_2=$LINENO ++ test "x$as_lineno_1" != "x$as_lineno_2" && ++ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { + +-/* Override any GCC internal prototype to avoid an error. +- Use char because int might match the return type of a GCC +- builtin and then its argument prototype would still apply. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-char bind_textdomain_codeset (); +-/* The GNU C library defines this for functions which it implements +- to always fail with ENOSYS. Some functions are actually named +- something starting with __ and the normal name is an alias. */ +-#if defined __stub_bind_textdomain_codeset || defined __stub___bind_textdomain_codeset +-choke me +-#endif ++ # Create $as_me.lineno as a copy of $as_myself, but with $LINENO ++ # uniformly replaced by the line number. The first 'sed' inserts a ++ # line-number line after each line using $LINENO; the second 'sed' ++ # does the real work. The second script uses 'N' to pair each ++ # line-number line with the line containing $LINENO, and appends ++ # trailing '-' during substitution so that $LINENO is not a special ++ # case at line end. ++ # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the ++ # scripts with optimization help from Paolo Bonzini. Blame Lee ++ # E. McMahon (1931-1989) for sed's syntax. :-) ++ sed -n ' ++ p ++ /[$]LINENO/= ++ ' <$as_myself | ++ sed ' ++ s/[$]LINENO.*/&-/ ++ t lineno ++ b ++ :lineno ++ N ++ :loop ++ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ ++ t loop ++ s/-\n.*// ++ ' >$as_me.lineno && ++ chmod +x "$as_me.lineno" || ++ { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 ++ { (exit 1); exit 1; }; } + +-int +-main () +-{ +-return bind_textdomain_codeset (); +- ; +- return 0; ++ # Don't try to exec as it changes $[0], causing all sort of problems ++ # (the dirname of $[0] is not the place where we might find the ++ # original and so on. Autoconf is especially sensitive to this). ++ . "./$as_me.lineno" ++ # Exit status is that of the last command. ++ exit + } +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then +- ac_cv_func_bind_textdomain_codeset=yes ++ ++ ++if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then ++ as_dirname=dirname + else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++ as_dirname=false ++fi + +- ac_cv_func_bind_textdomain_codeset=no ++ECHO_C= ECHO_N= ECHO_T= ++case `echo -n x` in ++-n*) ++ case `echo 'x\c'` in ++ *c*) ECHO_T=' ';; # ECHO_T is single tab character. ++ *) ECHO_C='\c';; ++ esac;; ++*) ++ ECHO_N='-n';; ++esac ++ ++if expr a : '\(a\)' >/dev/null 2>&1 && ++ test "X`expr 00001 : '.*\(...\)'`" = X001; then ++ as_expr=expr ++else ++ as_expr=false + fi + +-rm -rf conftest.dSYM +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext ++rm -f conf$$ conf$$.exe conf$$.file ++if test -d conf$$.dir; then ++ rm -f conf$$.dir/conf$$.file ++else ++ rm -f conf$$.dir ++ mkdir conf$$.dir + fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_bind_textdomain_codeset" >&5 +-$as_echo "$ac_cv_func_bind_textdomain_codeset" >&6; } +-if test $ac_cv_func_bind_textdomain_codeset = yes; then +- CATOBJEXT=.gmo +- DATADIRNAME=share ++echo >conf$$.file ++if ln -s conf$$.file conf$$ 2>/dev/null; then ++ as_ln_s='ln -s' ++ # ... but there are two gotchas: ++ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. ++ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. ++ # In both cases, we have to default to `cp -p'. ++ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || ++ as_ln_s='cp -p' ++elif ln conf$$.file conf$$ 2>/dev/null; then ++ as_ln_s=ln + else +- CATOBJEXT=.mo +- DATADIRNAME=lib ++ as_ln_s='cp -p' + fi ++rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file ++rmdir conf$$.dir 2>/dev/null + +- ;; +- *) +- CATOBJEXT=.mo +- DATADIRNAME=lib +- ;; +- esac ++if mkdir -p . 2>/dev/null; then ++ as_mkdir_p=: ++else ++ test -d ./-p && rmdir ./-p ++ as_mkdir_p=false + fi + +-rm -rf conftest.dSYM +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext +- LIBS="$glib_save_LIBS" +- INSTOBJEXT=.mo +- else +- gt_cv_have_gettext=no +- fi +- fi +- ++if test -x / >/dev/null 2>&1; then ++ as_test_x='test -x' ++else ++ if ls -dL / >/dev/null 2>&1; then ++ as_ls_L_option=L ++ else ++ as_ls_L_option= ++ fi ++ as_test_x=' ++ eval sh -c '\'' ++ if test -d "$1"; then ++ test -d "$1/."; ++ else ++ case $1 in ++ -*)set "./$1";; ++ esac; ++ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in ++ ???[sx]*):;;*)false;;esac;fi ++ '\'' sh ++ ' + fi ++as_executable_p=$as_test_x + ++# Sed expression to map a string onto a valid CPP name. ++as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" + ++# Sed expression to map a string onto a valid variable name. ++as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + +- if test "$gt_cv_have_gettext" = "yes" ; then +- +-cat >>confdefs.h <<\_ACEOF +-#define ENABLE_NLS 1 +-_ACEOF +- +- fi +- +- if test "$XGETTEXT" != ":"; then +- if $XGETTEXT --omit-header /dev/null 2> /dev/null; then +- : ; +- else +- { $as_echo "$as_me:$LINENO: result: found xgettext program is not GNU xgettext; ignore it" >&5 +-$as_echo "found xgettext program is not GNU xgettext; ignore it" >&6; } +- XGETTEXT=":" +- fi +- fi + +- # We need to process the po/ directory. +- POSUB=po ++exec 6>&1 + +- ac_config_commands="$ac_config_commands default-1" ++# Save the log message, to keep $[0] and so on meaningful, and to ++# report actual input values of CONFIG_FILES etc. instead of their ++# values after options handling. ++ac_log=" ++This file was extended by gnome-session $as_me 2.25.90, which was ++generated by GNU Autoconf 2.61. Invocation command line was + ++ CONFIG_FILES = $CONFIG_FILES ++ CONFIG_HEADERS = $CONFIG_HEADERS ++ CONFIG_LINKS = $CONFIG_LINKS ++ CONFIG_COMMANDS = $CONFIG_COMMANDS ++ $ $0 $@ + +- for lang in $ALL_LINGUAS; do +- GMOFILES="$GMOFILES $lang.gmo" +- POFILES="$POFILES $lang.po" +- done ++on `(hostname || uname -n) 2>/dev/null | sed 1q` ++" + ++_ACEOF + ++cat >>$CONFIG_STATUS <<_ACEOF ++# Files that config.status was made for. ++config_files="$ac_config_files" ++config_headers="$ac_config_headers" ++config_commands="$ac_config_commands" + ++_ACEOF + ++cat >>$CONFIG_STATUS <<\_ACEOF ++ac_cs_usage="\ ++\`$as_me' instantiates files from templates according to the ++current configuration. + ++Usage: $0 [OPTIONS] [FILE]... + ++ -h, --help print this help, then exit ++ -V, --version print version number and configuration settings, then exit ++ -q, --quiet do not print progress messages ++ -d, --debug don't remove temporary files ++ --recheck update $as_me by reconfiguring in the same conditions ++ --file=FILE[:TEMPLATE] ++ instantiate the configuration file FILE ++ --header=FILE[:TEMPLATE] ++ instantiate the configuration header FILE + ++Configuration files: ++$config_files + ++Configuration headers: ++$config_headers + ++Configuration commands: ++$config_commands + ++Report bugs to ." + ++_ACEOF ++cat >>$CONFIG_STATUS <<_ACEOF ++ac_cs_version="\\ ++gnome-session config.status 2.25.90 ++configured by $0, generated by GNU Autoconf 2.61, ++ with options \\"`echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\" + ++Copyright (C) 2006 Free Software Foundation, Inc. ++This config.status script is free software; the Free Software Foundation ++gives unlimited permission to copy, distribute and modify it." + +- if test "$gt_cv_have_gettext" = "yes"; then +- if test "x$ALL_LINGUAS" = "x"; then +- LINGUAS= +- else +- { $as_echo "$as_me:$LINENO: checking for catalogs to be installed" >&5 +-$as_echo_n "checking for catalogs to be installed... " >&6; } +- NEW_LINGUAS= +- for presentlang in $ALL_LINGUAS; do +- useit=no +- if test "%UNSET%" != "${LINGUAS-%UNSET%}"; then +- desiredlanguages="$LINGUAS" +- else +- desiredlanguages="$ALL_LINGUAS" +- fi +- for desiredlang in $desiredlanguages; do +- # Use the presentlang catalog if desiredlang is +- # a. equal to presentlang, or +- # b. a variant of presentlang (because in this case, +- # presentlang can be used as a fallback for messages +- # which are not translated in the desiredlang catalog). +- case "$desiredlang" in +- "$presentlang"*) useit=yes;; +- esac +- done +- if test $useit = yes; then +- NEW_LINGUAS="$NEW_LINGUAS $presentlang" +- fi +- done +- LINGUAS=$NEW_LINGUAS +- { $as_echo "$as_me:$LINENO: result: $LINGUAS" >&5 +-$as_echo "$LINGUAS" >&6; } +- fi ++ac_pwd='$ac_pwd' ++srcdir='$srcdir' ++INSTALL='$INSTALL' ++MKDIR_P='$MKDIR_P' ++_ACEOF + +- if test -n "$LINGUAS"; then +- for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done +- fi +- fi ++cat >>$CONFIG_STATUS <<\_ACEOF ++# If no file are specified by the user, then we need to provide default ++# value. By we need to know if files were specified by the user. ++ac_need_defaults=: ++while test $# != 0 ++do ++ case $1 in ++ --*=*) ++ ac_option=`expr "X$1" : 'X\([^=]*\)='` ++ ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` ++ ac_shift=: ++ ;; ++ *) ++ ac_option=$1 ++ ac_optarg=$2 ++ ac_shift=shift ++ ;; ++ esac + +- MKINSTALLDIRS= +- if test -n "$ac_aux_dir"; then +- MKINSTALLDIRS="$ac_aux_dir/mkinstalldirs" +- fi +- if test -z "$MKINSTALLDIRS"; then +- MKINSTALLDIRS="\$(top_srcdir)/mkinstalldirs" +- fi ++ case $ac_option in ++ # Handling of the options. ++ -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) ++ ac_cs_recheck=: ;; ++ --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) ++ echo "$ac_cs_version"; exit ;; ++ --debug | --debu | --deb | --de | --d | -d ) ++ debug=: ;; ++ --file | --fil | --fi | --f ) ++ $ac_shift ++ CONFIG_FILES="$CONFIG_FILES $ac_optarg" ++ ac_need_defaults=false;; ++ --header | --heade | --head | --hea ) ++ $ac_shift ++ CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg" ++ ac_need_defaults=false;; ++ --he | --h) ++ # Conflict between --help and --header ++ { echo "$as_me: error: ambiguous option: $1 ++Try \`$0 --help' for more information." >&2 ++ { (exit 1); exit 1; }; };; ++ --help | --hel | -h ) ++ echo "$ac_cs_usage"; exit ;; ++ -q | -quiet | --quiet | --quie | --qui | --qu | --q \ ++ | -silent | --silent | --silen | --sile | --sil | --si | --s) ++ ac_cs_silent=: ;; + ++ # This is an error. ++ -*) { echo "$as_me: error: unrecognized option: $1 ++Try \`$0 --help' for more information." >&2 ++ { (exit 1); exit 1; }; } ;; + +- test -d po || mkdir po +- if test "x$srcdir" != "x."; then +- if test "x`echo $srcdir | sed 's@/.*@@'`" = "x"; then +- posrcprefix="$srcdir/" +- else +- posrcprefix="../$srcdir/" +- fi +- else +- posrcprefix="../" +- fi +- rm -f po/POTFILES +- sed -e "/^#/d" -e "/^\$/d" -e "s,.*, $posrcprefix& \\\\," -e "\$s/\(.*\) \\\\/\1/" \ +- < $srcdir/po/POTFILES.in > po/POTFILES ++ *) ac_config_targets="$ac_config_targets $1" ++ ac_need_defaults=false ;; + ++ esac ++ shift ++done ++ ++ac_configure_extra_args= ++ ++if $ac_cs_silent; then ++ exec 6>/dev/null ++ ac_configure_extra_args="$ac_configure_extra_args --silent" ++fi + +-{ $as_echo "$as_me:$LINENO: checking for ANSI C header files" >&5 +-$as_echo_n "checking for ANSI C header files... " >&6; } +-if test "${ac_cv_header_stdc+set}" = set; then +- $as_echo_n "(cached) " >&6 +-else +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ + _ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-#include +-#include +-#include +-#include ++cat >>$CONFIG_STATUS <<_ACEOF ++if \$ac_cs_recheck; then ++ echo "running CONFIG_SHELL=$SHELL $SHELL $0 "$ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 ++ CONFIG_SHELL=$SHELL ++ export CONFIG_SHELL ++ exec $SHELL "$0"$ac_configure_args \$ac_configure_extra_args --no-create --no-recursion ++fi + +-int +-main () ++_ACEOF ++cat >>$CONFIG_STATUS <<\_ACEOF ++exec 5>>config.log + { ++ echo ++ sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX ++## Running $as_me. ## ++_ASBOX ++ echo "$ac_log" ++} >&5 + +- ; +- return 0; +-} + _ACEOF +-rm -f conftest.$ac_objext +-if { (ac_try="$ac_compile" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; ++cat >>$CONFIG_STATUS <<_ACEOF ++# ++# INIT-COMMANDS ++# ++AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" ++ ++ ++# The HP-UX ksh and POSIX shell print the target directory to stdout ++# if CDPATH is set. ++(unset CDPATH) >/dev/null 2>&1 && unset CDPATH ++ ++sed_quote_subst='$sed_quote_subst' ++double_quote_subst='$double_quote_subst' ++delay_variable_subst='$delay_variable_subst' ++macro_version='`$ECHO "X$macro_version" | $Xsed -e "$delay_single_quote_subst"`' ++macro_revision='`$ECHO "X$macro_revision" | $Xsed -e "$delay_single_quote_subst"`' ++enable_shared='`$ECHO "X$enable_shared" | $Xsed -e "$delay_single_quote_subst"`' ++enable_static='`$ECHO "X$enable_static" | $Xsed -e "$delay_single_quote_subst"`' ++pic_mode='`$ECHO "X$pic_mode" | $Xsed -e "$delay_single_quote_subst"`' ++enable_fast_install='`$ECHO "X$enable_fast_install" | $Xsed -e "$delay_single_quote_subst"`' ++host_alias='`$ECHO "X$host_alias" | $Xsed -e "$delay_single_quote_subst"`' ++host='`$ECHO "X$host" | $Xsed -e "$delay_single_quote_subst"`' ++host_os='`$ECHO "X$host_os" | $Xsed -e "$delay_single_quote_subst"`' ++build_alias='`$ECHO "X$build_alias" | $Xsed -e "$delay_single_quote_subst"`' ++build='`$ECHO "X$build" | $Xsed -e "$delay_single_quote_subst"`' ++build_os='`$ECHO "X$build_os" | $Xsed -e "$delay_single_quote_subst"`' ++SED='`$ECHO "X$SED" | $Xsed -e "$delay_single_quote_subst"`' ++Xsed='`$ECHO "X$Xsed" | $Xsed -e "$delay_single_quote_subst"`' ++GREP='`$ECHO "X$GREP" | $Xsed -e "$delay_single_quote_subst"`' ++EGREP='`$ECHO "X$EGREP" | $Xsed -e "$delay_single_quote_subst"`' ++FGREP='`$ECHO "X$FGREP" | $Xsed -e "$delay_single_quote_subst"`' ++LD='`$ECHO "X$LD" | $Xsed -e "$delay_single_quote_subst"`' ++NM='`$ECHO "X$NM" | $Xsed -e "$delay_single_quote_subst"`' ++LN_S='`$ECHO "X$LN_S" | $Xsed -e "$delay_single_quote_subst"`' ++max_cmd_len='`$ECHO "X$max_cmd_len" | $Xsed -e "$delay_single_quote_subst"`' ++ac_objext='`$ECHO "X$ac_objext" | $Xsed -e "$delay_single_quote_subst"`' ++exeext='`$ECHO "X$exeext" | $Xsed -e "$delay_single_quote_subst"`' ++lt_unset='`$ECHO "X$lt_unset" | $Xsed -e "$delay_single_quote_subst"`' ++lt_SP2NL='`$ECHO "X$lt_SP2NL" | $Xsed -e "$delay_single_quote_subst"`' ++lt_NL2SP='`$ECHO "X$lt_NL2SP" | $Xsed -e "$delay_single_quote_subst"`' ++reload_flag='`$ECHO "X$reload_flag" | $Xsed -e "$delay_single_quote_subst"`' ++reload_cmds='`$ECHO "X$reload_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++deplibs_check_method='`$ECHO "X$deplibs_check_method" | $Xsed -e "$delay_single_quote_subst"`' ++file_magic_cmd='`$ECHO "X$file_magic_cmd" | $Xsed -e "$delay_single_quote_subst"`' ++AR='`$ECHO "X$AR" | $Xsed -e "$delay_single_quote_subst"`' ++AR_FLAGS='`$ECHO "X$AR_FLAGS" | $Xsed -e "$delay_single_quote_subst"`' ++STRIP='`$ECHO "X$STRIP" | $Xsed -e "$delay_single_quote_subst"`' ++RANLIB='`$ECHO "X$RANLIB" | $Xsed -e "$delay_single_quote_subst"`' ++old_postinstall_cmds='`$ECHO "X$old_postinstall_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++old_postuninstall_cmds='`$ECHO "X$old_postuninstall_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++old_archive_cmds='`$ECHO "X$old_archive_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++CC='`$ECHO "X$CC" | $Xsed -e "$delay_single_quote_subst"`' ++CFLAGS='`$ECHO "X$CFLAGS" | $Xsed -e "$delay_single_quote_subst"`' ++compiler='`$ECHO "X$compiler" | $Xsed -e "$delay_single_quote_subst"`' ++GCC='`$ECHO "X$GCC" | $Xsed -e "$delay_single_quote_subst"`' ++lt_cv_sys_global_symbol_pipe='`$ECHO "X$lt_cv_sys_global_symbol_pipe" | $Xsed -e "$delay_single_quote_subst"`' ++lt_cv_sys_global_symbol_to_cdecl='`$ECHO "X$lt_cv_sys_global_symbol_to_cdecl" | $Xsed -e "$delay_single_quote_subst"`' ++lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "X$lt_cv_sys_global_symbol_to_c_name_address" | $Xsed -e "$delay_single_quote_subst"`' ++lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "X$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $Xsed -e "$delay_single_quote_subst"`' ++objdir='`$ECHO "X$objdir" | $Xsed -e "$delay_single_quote_subst"`' ++SHELL='`$ECHO "X$SHELL" | $Xsed -e "$delay_single_quote_subst"`' ++ECHO='`$ECHO "X$ECHO" | $Xsed -e "$delay_single_quote_subst"`' ++MAGIC_CMD='`$ECHO "X$MAGIC_CMD" | $Xsed -e "$delay_single_quote_subst"`' ++lt_prog_compiler_no_builtin_flag='`$ECHO "X$lt_prog_compiler_no_builtin_flag" | $Xsed -e "$delay_single_quote_subst"`' ++lt_prog_compiler_wl='`$ECHO "X$lt_prog_compiler_wl" | $Xsed -e "$delay_single_quote_subst"`' ++lt_prog_compiler_pic='`$ECHO "X$lt_prog_compiler_pic" | $Xsed -e "$delay_single_quote_subst"`' ++lt_prog_compiler_static='`$ECHO "X$lt_prog_compiler_static" | $Xsed -e "$delay_single_quote_subst"`' ++lt_cv_prog_compiler_c_o='`$ECHO "X$lt_cv_prog_compiler_c_o" | $Xsed -e "$delay_single_quote_subst"`' ++need_locks='`$ECHO "X$need_locks" | $Xsed -e "$delay_single_quote_subst"`' ++DSYMUTIL='`$ECHO "X$DSYMUTIL" | $Xsed -e "$delay_single_quote_subst"`' ++NMEDIT='`$ECHO "X$NMEDIT" | $Xsed -e "$delay_single_quote_subst"`' ++LIPO='`$ECHO "X$LIPO" | $Xsed -e "$delay_single_quote_subst"`' ++OTOOL='`$ECHO "X$OTOOL" | $Xsed -e "$delay_single_quote_subst"`' ++OTOOL64='`$ECHO "X$OTOOL64" | $Xsed -e "$delay_single_quote_subst"`' ++libext='`$ECHO "X$libext" | $Xsed -e "$delay_single_quote_subst"`' ++shrext_cmds='`$ECHO "X$shrext_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++extract_expsyms_cmds='`$ECHO "X$extract_expsyms_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++archive_cmds_need_lc='`$ECHO "X$archive_cmds_need_lc" | $Xsed -e "$delay_single_quote_subst"`' ++enable_shared_with_static_runtimes='`$ECHO "X$enable_shared_with_static_runtimes" | $Xsed -e "$delay_single_quote_subst"`' ++export_dynamic_flag_spec='`$ECHO "X$export_dynamic_flag_spec" | $Xsed -e "$delay_single_quote_subst"`' ++whole_archive_flag_spec='`$ECHO "X$whole_archive_flag_spec" | $Xsed -e "$delay_single_quote_subst"`' ++compiler_needs_object='`$ECHO "X$compiler_needs_object" | $Xsed -e "$delay_single_quote_subst"`' ++old_archive_from_new_cmds='`$ECHO "X$old_archive_from_new_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++old_archive_from_expsyms_cmds='`$ECHO "X$old_archive_from_expsyms_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++archive_cmds='`$ECHO "X$archive_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++archive_expsym_cmds='`$ECHO "X$archive_expsym_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++module_cmds='`$ECHO "X$module_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++module_expsym_cmds='`$ECHO "X$module_expsym_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++with_gnu_ld='`$ECHO "X$with_gnu_ld" | $Xsed -e "$delay_single_quote_subst"`' ++allow_undefined_flag='`$ECHO "X$allow_undefined_flag" | $Xsed -e "$delay_single_quote_subst"`' ++no_undefined_flag='`$ECHO "X$no_undefined_flag" | $Xsed -e "$delay_single_quote_subst"`' ++hardcode_libdir_flag_spec='`$ECHO "X$hardcode_libdir_flag_spec" | $Xsed -e "$delay_single_quote_subst"`' ++hardcode_libdir_flag_spec_ld='`$ECHO "X$hardcode_libdir_flag_spec_ld" | $Xsed -e "$delay_single_quote_subst"`' ++hardcode_libdir_separator='`$ECHO "X$hardcode_libdir_separator" | $Xsed -e "$delay_single_quote_subst"`' ++hardcode_direct='`$ECHO "X$hardcode_direct" | $Xsed -e "$delay_single_quote_subst"`' ++hardcode_direct_absolute='`$ECHO "X$hardcode_direct_absolute" | $Xsed -e "$delay_single_quote_subst"`' ++hardcode_minus_L='`$ECHO "X$hardcode_minus_L" | $Xsed -e "$delay_single_quote_subst"`' ++hardcode_shlibpath_var='`$ECHO "X$hardcode_shlibpath_var" | $Xsed -e "$delay_single_quote_subst"`' ++hardcode_automatic='`$ECHO "X$hardcode_automatic" | $Xsed -e "$delay_single_quote_subst"`' ++inherit_rpath='`$ECHO "X$inherit_rpath" | $Xsed -e "$delay_single_quote_subst"`' ++link_all_deplibs='`$ECHO "X$link_all_deplibs" | $Xsed -e "$delay_single_quote_subst"`' ++fix_srcfile_path='`$ECHO "X$fix_srcfile_path" | $Xsed -e "$delay_single_quote_subst"`' ++always_export_symbols='`$ECHO "X$always_export_symbols" | $Xsed -e "$delay_single_quote_subst"`' ++export_symbols_cmds='`$ECHO "X$export_symbols_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++exclude_expsyms='`$ECHO "X$exclude_expsyms" | $Xsed -e "$delay_single_quote_subst"`' ++include_expsyms='`$ECHO "X$include_expsyms" | $Xsed -e "$delay_single_quote_subst"`' ++prelink_cmds='`$ECHO "X$prelink_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++file_list_spec='`$ECHO "X$file_list_spec" | $Xsed -e "$delay_single_quote_subst"`' ++variables_saved_for_relink='`$ECHO "X$variables_saved_for_relink" | $Xsed -e "$delay_single_quote_subst"`' ++need_lib_prefix='`$ECHO "X$need_lib_prefix" | $Xsed -e "$delay_single_quote_subst"`' ++need_version='`$ECHO "X$need_version" | $Xsed -e "$delay_single_quote_subst"`' ++version_type='`$ECHO "X$version_type" | $Xsed -e "$delay_single_quote_subst"`' ++runpath_var='`$ECHO "X$runpath_var" | $Xsed -e "$delay_single_quote_subst"`' ++shlibpath_var='`$ECHO "X$shlibpath_var" | $Xsed -e "$delay_single_quote_subst"`' ++shlibpath_overrides_runpath='`$ECHO "X$shlibpath_overrides_runpath" | $Xsed -e "$delay_single_quote_subst"`' ++libname_spec='`$ECHO "X$libname_spec" | $Xsed -e "$delay_single_quote_subst"`' ++library_names_spec='`$ECHO "X$library_names_spec" | $Xsed -e "$delay_single_quote_subst"`' ++soname_spec='`$ECHO "X$soname_spec" | $Xsed -e "$delay_single_quote_subst"`' ++postinstall_cmds='`$ECHO "X$postinstall_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++postuninstall_cmds='`$ECHO "X$postuninstall_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++finish_cmds='`$ECHO "X$finish_cmds" | $Xsed -e "$delay_single_quote_subst"`' ++finish_eval='`$ECHO "X$finish_eval" | $Xsed -e "$delay_single_quote_subst"`' ++hardcode_into_libs='`$ECHO "X$hardcode_into_libs" | $Xsed -e "$delay_single_quote_subst"`' ++sys_lib_search_path_spec='`$ECHO "X$sys_lib_search_path_spec" | $Xsed -e "$delay_single_quote_subst"`' ++sys_lib_dlsearch_path_spec='`$ECHO "X$sys_lib_dlsearch_path_spec" | $Xsed -e "$delay_single_quote_subst"`' ++hardcode_action='`$ECHO "X$hardcode_action" | $Xsed -e "$delay_single_quote_subst"`' ++enable_dlopen='`$ECHO "X$enable_dlopen" | $Xsed -e "$delay_single_quote_subst"`' ++enable_dlopen_self='`$ECHO "X$enable_dlopen_self" | $Xsed -e "$delay_single_quote_subst"`' ++enable_dlopen_self_static='`$ECHO "X$enable_dlopen_self_static" | $Xsed -e "$delay_single_quote_subst"`' ++old_striplib='`$ECHO "X$old_striplib" | $Xsed -e "$delay_single_quote_subst"`' ++striplib='`$ECHO "X$striplib" | $Xsed -e "$delay_single_quote_subst"`' ++ ++LTCC='$LTCC' ++LTCFLAGS='$LTCFLAGS' ++compiler='$compiler_DEFAULT' ++ ++# Quote evaled strings. ++for var in SED \ ++GREP \ ++EGREP \ ++FGREP \ ++LD \ ++NM \ ++LN_S \ ++lt_SP2NL \ ++lt_NL2SP \ ++reload_flag \ ++deplibs_check_method \ ++file_magic_cmd \ ++AR \ ++AR_FLAGS \ ++STRIP \ ++RANLIB \ ++CC \ ++CFLAGS \ ++compiler \ ++lt_cv_sys_global_symbol_pipe \ ++lt_cv_sys_global_symbol_to_cdecl \ ++lt_cv_sys_global_symbol_to_c_name_address \ ++lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \ ++SHELL \ ++ECHO \ ++lt_prog_compiler_no_builtin_flag \ ++lt_prog_compiler_wl \ ++lt_prog_compiler_pic \ ++lt_prog_compiler_static \ ++lt_cv_prog_compiler_c_o \ ++need_locks \ ++DSYMUTIL \ ++NMEDIT \ ++LIPO \ ++OTOOL \ ++OTOOL64 \ ++shrext_cmds \ ++export_dynamic_flag_spec \ ++whole_archive_flag_spec \ ++compiler_needs_object \ ++with_gnu_ld \ ++allow_undefined_flag \ ++no_undefined_flag \ ++hardcode_libdir_flag_spec \ ++hardcode_libdir_flag_spec_ld \ ++hardcode_libdir_separator \ ++fix_srcfile_path \ ++exclude_expsyms \ ++include_expsyms \ ++file_list_spec \ ++variables_saved_for_relink \ ++libname_spec \ ++library_names_spec \ ++soname_spec \ ++finish_eval \ ++old_striplib \ ++striplib; do ++ case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in ++ *[\\\\\\\`\\"\\\$]*) ++ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" ++ ;; ++ *) ++ eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" ++ ;; ++ esac ++done ++ ++# Double-quote double-evaled strings. ++for var in reload_cmds \ ++old_postinstall_cmds \ ++old_postuninstall_cmds \ ++old_archive_cmds \ ++extract_expsyms_cmds \ ++old_archive_from_new_cmds \ ++old_archive_from_expsyms_cmds \ ++archive_cmds \ ++archive_expsym_cmds \ ++module_cmds \ ++module_expsym_cmds \ ++export_symbols_cmds \ ++prelink_cmds \ ++postinstall_cmds \ ++postuninstall_cmds \ ++finish_cmds \ ++sys_lib_search_path_spec \ ++sys_lib_dlsearch_path_spec; do ++ case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in ++ *[\\\\\\\`\\"\\\$]*) ++ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" ++ ;; ++ *) ++ eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" ++ ;; ++ esac ++done ++ ++# Fix-up fallback echo if it was mangled by the above quoting rules. ++case \$lt_ECHO in ++*'\\\$0 --fallback-echo"') lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\$0 --fallback-echo"\$/\$0 --fallback-echo"/'\` ++ ;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_compile") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest.$ac_objext; then +- ac_cv_header_stdc=yes +-else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 + +- ac_cv_header_stdc=no ++ac_aux_dir='$ac_aux_dir' ++xsi_shell='$xsi_shell' ++lt_shell_append='$lt_shell_append' ++ ++# See if we are running on zsh, and set the options which allow our ++# commands through without removal of \ escapes INIT. ++if test -n "\${ZSH_VERSION+set}" ; then ++ setopt NO_GLOB_SUBST + fi + +-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + +-if test $ac_cv_header_stdc = yes; then +- # SunOS 4.x string.h does not declare mem*, contrary to ANSI. +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-#include ++ PACKAGE='$PACKAGE' ++ VERSION='$VERSION' ++ TIMESTAMP='$TIMESTAMP' ++ RM='$RM' ++ ofile='$ofile' ++ + +-_ACEOF +-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | +- $EGREP "memchr" >/dev/null 2>&1; then +- : +-else +- ac_cv_header_stdc=no +-fi +-rm -f conftest* + +-fi + +-if test $ac_cv_header_stdc = yes; then +- # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-#include + + _ACEOF +-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | +- $EGREP "free" >/dev/null 2>&1; then +- : +-else +- ac_cv_header_stdc=no +-fi +-rm -f conftest* + +-fi ++cat >>$CONFIG_STATUS <<\_ACEOF + +-if test $ac_cv_header_stdc = yes; then +- # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. +- if test "$cross_compiling" = yes; then +- : +-else +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-#include +-#include +-#if ((' ' & 0x0FF) == 0x020) +-# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') +-# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) +-#else +-# define ISLOWER(c) \ +- (('a' <= (c) && (c) <= 'i') \ +- || ('j' <= (c) && (c) <= 'r') \ +- || ('s' <= (c) && (c) <= 'z')) +-# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) +-#endif ++# Handling of arguments. ++for ac_config_target in $ac_config_targets ++do ++ case $ac_config_target in ++ "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; ++ "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; ++ "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;; ++ "default-1") CONFIG_COMMANDS="$CONFIG_COMMANDS default-1" ;; ++ "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; ++ "capplet/Makefile") CONFIG_FILES="$CONFIG_FILES capplet/Makefile" ;; ++ "compat/Makefile") CONFIG_FILES="$CONFIG_FILES compat/Makefile" ;; ++ "compat/at-spi-registryd-wrapper.desktop.in.in") CONFIG_FILES="$CONFIG_FILES compat/at-spi-registryd-wrapper.desktop.in.in" ;; ++ "compat/gnome-settings-daemon-helper.desktop.in.in") CONFIG_FILES="$CONFIG_FILES compat/gnome-settings-daemon-helper.desktop.in.in" ;; ++ "doc/Makefile") CONFIG_FILES="$CONFIG_FILES doc/Makefile" ;; ++ "doc/dbus/Makefile") CONFIG_FILES="$CONFIG_FILES doc/dbus/Makefile" ;; ++ "doc/dbus/gnome-session.xml") CONFIG_FILES="$CONFIG_FILES doc/dbus/gnome-session.xml" ;; ++ "doc/man/Makefile") CONFIG_FILES="$CONFIG_FILES doc/man/Makefile" ;; ++ "doc/man/gnome-session.1") CONFIG_FILES="$CONFIG_FILES doc/man/gnome-session.1" ;; ++ "doc/man/default.session.5") CONFIG_FILES="$CONFIG_FILES doc/man/default.session.5" ;; ++ "data/Makefile") CONFIG_FILES="$CONFIG_FILES data/Makefile" ;; ++ "data/gnome-wm.desktop.in") CONFIG_FILES="$CONFIG_FILES data/gnome-wm.desktop.in" ;; ++ "data/session-properties.desktop.in") CONFIG_FILES="$CONFIG_FILES data/session-properties.desktop.in" ;; ++ "data/icons/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/Makefile" ;; ++ "data/icons/16x16/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/16x16/Makefile" ;; ++ "data/icons/22x22/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/22x22/Makefile" ;; ++ "data/icons/24x24/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/24x24/Makefile" ;; ++ "data/icons/32x32/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/32x32/Makefile" ;; ++ "data/icons/48x48/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/48x48/Makefile" ;; ++ "data/icons/scalable/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/scalable/Makefile" ;; ++ "egg/Makefile") CONFIG_FILES="$CONFIG_FILES egg/Makefile" ;; ++ "gnome-session/Makefile") CONFIG_FILES="$CONFIG_FILES gnome-session/Makefile" ;; ++ "splash/Makefile") CONFIG_FILES="$CONFIG_FILES splash/Makefile" ;; ++ "splash/gnome-session-splash.desktop.in.in") CONFIG_FILES="$CONFIG_FILES splash/gnome-session-splash.desktop.in.in" ;; ++ "tools/Makefile") CONFIG_FILES="$CONFIG_FILES tools/Makefile" ;; ++ "po/Makefile.in") CONFIG_FILES="$CONFIG_FILES po/Makefile.in" ;; ++ "po/stamp-it") CONFIG_COMMANDS="$CONFIG_COMMANDS po/stamp-it" ;; + +-#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) +-int +-main () ++ *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 ++echo "$as_me: error: invalid argument: $ac_config_target" >&2;} ++ { (exit 1); exit 1; }; };; ++ esac ++done ++ ++ ++# If the user did not use the arguments to specify the items to instantiate, ++# then the envvar interface is used. Set only those that are not. ++# We use the long form for the default assignment because of an extremely ++# bizarre bug on SunOS 4.1.3. ++if $ac_need_defaults; then ++ test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files ++ test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers ++ test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands ++fi ++ ++# Have a temporary directory for convenience. Make it in the build tree ++# simply because there is no reason against having it here, and in addition, ++# creating and moving files from /tmp can sometimes cause problems. ++# Hook for its removal unless debugging. ++# Note that there is a small window in which the directory will not be cleaned: ++# after its creation but before its name has been assigned to `$tmp'. ++$debug || + { +- int i; +- for (i = 0; i < 256; i++) +- if (XOR (islower (i), ISLOWER (i)) +- || toupper (i) != TOUPPER (i)) +- return 2; +- return 0; ++ tmp= ++ trap 'exit_status=$? ++ { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status ++' 0 ++ trap '{ (exit 1); exit 1; }' 1 2 13 15 + } +-_ACEOF +-rm -f conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_link") 2>&5 +- ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { ac_try='./conftest$ac_exeext' +- { (case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_try") 2>&5 +- ac_status=$? +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- : +-else +- $as_echo "$as_me: program exited with status $ac_status" >&5 +-$as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++# Create a (secure) tmp directory for tmp files. + +-( exit $ac_status ) +-ac_cv_header_stdc=no +-fi +-rm -rf conftest.dSYM +-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +-fi ++{ ++ tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && ++ test -n "$tmp" && test -d "$tmp" ++} || ++{ ++ tmp=./conf$$-$RANDOM ++ (umask 077 && mkdir "$tmp") ++} || ++{ ++ echo "$me: cannot create a temporary directory in ." >&2 ++ { (exit 1); exit 1; } ++} + ++# ++# Set up the sed scripts for CONFIG_FILES section. ++# + +-fi +-fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 +-$as_echo "$ac_cv_header_stdc" >&6; } +-if test $ac_cv_header_stdc = yes; then ++# No need to generate the scripts if there are no CONFIG_FILES. ++# This happens for instance when ./config.status config.h ++if test -n "$CONFIG_FILES"; then + +-cat >>confdefs.h <<\_ACEOF +-#define STDC_HEADERS 1 + _ACEOF + +-fi +- + + +- +-for ac_header in syslog.h tcpd.h sys/param.h +-do +-as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` +-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then +- { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 +-$as_echo_n "checking for $ac_header... " >&6; } +-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then +- $as_echo_n "(cached) " >&6 +-fi +-ac_res=`eval 'as_val=${'$as_ac_Header'} +- $as_echo "$as_val"'` +- { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 +-$as_echo "$ac_res" >&6; } +-else +- # Is the header compilable? +-{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5 +-$as_echo_n "checking $ac_header usability... " >&6; } +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-$ac_includes_default +-#include <$ac_header> ++ac_delim='%!_!# ' ++for ac_last_try in false false false false false :; do ++ cat >conf$$subs.sed <<_ACEOF ++SHELL!$SHELL$ac_delim ++PATH_SEPARATOR!$PATH_SEPARATOR$ac_delim ++PACKAGE_NAME!$PACKAGE_NAME$ac_delim ++PACKAGE_TARNAME!$PACKAGE_TARNAME$ac_delim ++PACKAGE_VERSION!$PACKAGE_VERSION$ac_delim ++PACKAGE_STRING!$PACKAGE_STRING$ac_delim ++PACKAGE_BUGREPORT!$PACKAGE_BUGREPORT$ac_delim ++exec_prefix!$exec_prefix$ac_delim ++prefix!$prefix$ac_delim ++program_transform_name!$program_transform_name$ac_delim ++bindir!$bindir$ac_delim ++sbindir!$sbindir$ac_delim ++libexecdir!$libexecdir$ac_delim ++datarootdir!$datarootdir$ac_delim ++datadir!$datadir$ac_delim ++sysconfdir!$sysconfdir$ac_delim ++sharedstatedir!$sharedstatedir$ac_delim ++localstatedir!$localstatedir$ac_delim ++includedir!$includedir$ac_delim ++oldincludedir!$oldincludedir$ac_delim ++docdir!$docdir$ac_delim ++infodir!$infodir$ac_delim ++htmldir!$htmldir$ac_delim ++dvidir!$dvidir$ac_delim ++pdfdir!$pdfdir$ac_delim ++psdir!$psdir$ac_delim ++libdir!$libdir$ac_delim ++localedir!$localedir$ac_delim ++mandir!$mandir$ac_delim ++DEFS!$DEFS$ac_delim ++ECHO_C!$ECHO_C$ac_delim ++ECHO_N!$ECHO_N$ac_delim ++ECHO_T!$ECHO_T$ac_delim ++LIBS!$LIBS$ac_delim ++build_alias!$build_alias$ac_delim ++host_alias!$host_alias$ac_delim ++target_alias!$target_alias$ac_delim ++INSTALL_PROGRAM!$INSTALL_PROGRAM$ac_delim ++INSTALL_SCRIPT!$INSTALL_SCRIPT$ac_delim ++INSTALL_DATA!$INSTALL_DATA$ac_delim ++am__isrc!$am__isrc$ac_delim ++CYGPATH_W!$CYGPATH_W$ac_delim ++PACKAGE!$PACKAGE$ac_delim ++VERSION!$VERSION$ac_delim ++ACLOCAL!$ACLOCAL$ac_delim ++AUTOCONF!$AUTOCONF$ac_delim ++AUTOMAKE!$AUTOMAKE$ac_delim ++AUTOHEADER!$AUTOHEADER$ac_delim ++MAKEINFO!$MAKEINFO$ac_delim ++install_sh!$install_sh$ac_delim ++STRIP!$STRIP$ac_delim ++INSTALL_STRIP_PROGRAM!$INSTALL_STRIP_PROGRAM$ac_delim ++mkdir_p!$mkdir_p$ac_delim ++AWK!$AWK$ac_delim ++SET_MAKE!$SET_MAKE$ac_delim ++am__leading_dot!$am__leading_dot$ac_delim ++AMTAR!$AMTAR$ac_delim ++am__tar!$am__tar$ac_delim ++am__untar!$am__untar$ac_delim ++MAINTAINER_MODE_TRUE!$MAINTAINER_MODE_TRUE$ac_delim ++MAINTAINER_MODE_FALSE!$MAINTAINER_MODE_FALSE$ac_delim ++MAINT!$MAINT$ac_delim ++ACLOCAL_AMFLAGS!$ACLOCAL_AMFLAGS$ac_delim ++USE_NLS!$USE_NLS$ac_delim ++INTLTOOL_UPDATE!$INTLTOOL_UPDATE$ac_delim ++INTLTOOL_MERGE!$INTLTOOL_MERGE$ac_delim ++INTLTOOL_EXTRACT!$INTLTOOL_EXTRACT$ac_delim ++INTLTOOL_DESKTOP_RULE!$INTLTOOL_DESKTOP_RULE$ac_delim ++INTLTOOL_DIRECTORY_RULE!$INTLTOOL_DIRECTORY_RULE$ac_delim ++INTLTOOL_KEYS_RULE!$INTLTOOL_KEYS_RULE$ac_delim ++INTLTOOL_PROP_RULE!$INTLTOOL_PROP_RULE$ac_delim ++INTLTOOL_OAF_RULE!$INTLTOOL_OAF_RULE$ac_delim ++INTLTOOL_PONG_RULE!$INTLTOOL_PONG_RULE$ac_delim ++INTLTOOL_SERVER_RULE!$INTLTOOL_SERVER_RULE$ac_delim ++INTLTOOL_SHEET_RULE!$INTLTOOL_SHEET_RULE$ac_delim ++INTLTOOL_SOUNDLIST_RULE!$INTLTOOL_SOUNDLIST_RULE$ac_delim ++INTLTOOL_UI_RULE!$INTLTOOL_UI_RULE$ac_delim ++INTLTOOL_XAM_RULE!$INTLTOOL_XAM_RULE$ac_delim ++INTLTOOL_KBD_RULE!$INTLTOOL_KBD_RULE$ac_delim ++INTLTOOL_XML_RULE!$INTLTOOL_XML_RULE$ac_delim ++INTLTOOL_XML_NOMERGE_RULE!$INTLTOOL_XML_NOMERGE_RULE$ac_delim ++INTLTOOL_CAVES_RULE!$INTLTOOL_CAVES_RULE$ac_delim ++INTLTOOL_SCHEMAS_RULE!$INTLTOOL_SCHEMAS_RULE$ac_delim ++INTLTOOL_THEME_RULE!$INTLTOOL_THEME_RULE$ac_delim ++INTLTOOL_SERVICE_RULE!$INTLTOOL_SERVICE_RULE$ac_delim ++INTLTOOL_POLICY_RULE!$INTLTOOL_POLICY_RULE$ac_delim ++XGETTEXT!$XGETTEXT$ac_delim ++MSGMERGE!$MSGMERGE$ac_delim ++MSGFMT!$MSGFMT$ac_delim ++GMSGFMT!$GMSGFMT$ac_delim ++INTLTOOL_PERL!$INTLTOOL_PERL$ac_delim ++ALL_LINGUAS!$ALL_LINGUAS$ac_delim ++CC!$CC$ac_delim ++CFLAGS!$CFLAGS$ac_delim ++LDFLAGS!$LDFLAGS$ac_delim ++CPPFLAGS!$CPPFLAGS$ac_delim ++ac_ct_CC!$ac_ct_CC$ac_delim + _ACEOF +-rm -f conftest.$ac_objext +-if { (ac_try="$ac_compile" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_compile") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest.$ac_objext; then +- ac_header_compiler=yes +-else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 + +- ac_header_compiler=no +-fi ++ if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 97; then ++ break ++ elif $ac_last_try; then ++ { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 ++echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} ++ { (exit 1); exit 1; }; } ++ else ++ ac_delim="$ac_delim!$ac_delim _$ac_delim!! " ++ fi ++done + +-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +-{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +-$as_echo "$ac_header_compiler" >&6; } ++ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed` ++if test -n "$ac_eof"; then ++ ac_eof=`echo "$ac_eof" | sort -nru | sed 1q` ++ ac_eof=`expr $ac_eof + 1` ++fi + +-# Is the header present? +-{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5 +-$as_echo_n "checking $ac_header presence... " >&6; } +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ ++cat >>$CONFIG_STATUS <<_ACEOF ++cat >"\$tmp/subs-1.sed" <<\CEOF$ac_eof ++/@[a-zA-Z_][a-zA-Z_0-9]*@/!b + _ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-#include <$ac_header> ++sed ' ++s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g ++s/^/s,@/; s/!/@,|#_!!_#|/ ++:n ++t n ++s/'"$ac_delim"'$/,g/; t ++s/$/\\/; p ++N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n ++' >>$CONFIG_STATUS >$CONFIG_STATUS <<_ACEOF ++CEOF$ac_eof + _ACEOF +-if { (ac_try="$ac_cpp conftest.$ac_ext" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } >/dev/null && { +- test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || +- test ! -s conftest.err +- }; then +- ac_header_preproc=yes +-else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- ac_header_preproc=no +-fi +- +-rm -f conftest.err conftest.$ac_ext +-{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +-$as_echo "$ac_header_preproc" >&6; } + +-# So? What about this header? +-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in +- yes:no: ) +- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 +-$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 +-$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} +- ac_header_preproc=yes +- ;; +- no:yes:* ) +- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 +-$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 +-$as_echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 +-$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 +-$as_echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 +-$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 +-$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} +- ( cat <<\_ASBOX +-## ---------------------------------------------------------------------------- ## +-## Report this to http://bugzilla.gnome.org/enter_bug.cgi?product=gnome-session ## +-## ---------------------------------------------------------------------------- ## +-_ASBOX +- ) | sed "s/^/$as_me: WARNING: /" >&2 +- ;; +-esac +-{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 +-$as_echo_n "checking for $ac_header... " >&6; } +-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then +- $as_echo_n "(cached) " >&6 +-else +- eval "$as_ac_Header=\$ac_header_preproc" +-fi +-ac_res=`eval 'as_val=${'$as_ac_Header'} +- $as_echo "$as_val"'` +- { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 +-$as_echo "$ac_res" >&6; } + +-fi +-if test `eval 'as_val=${'$as_ac_Header'} +- $as_echo "$as_val"'` = yes; then +- cat >>confdefs.h <<_ACEOF +-#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 ++ac_delim='%!_!# ' ++for ac_last_try in false false false false false :; do ++ cat >conf$$subs.sed <<_ACEOF ++EXEEXT!$EXEEXT$ac_delim ++OBJEXT!$OBJEXT$ac_delim ++DEPDIR!$DEPDIR$ac_delim ++am__include!$am__include$ac_delim ++am__quote!$am__quote$ac_delim ++AMDEP_TRUE!$AMDEP_TRUE$ac_delim ++AMDEP_FALSE!$AMDEP_FALSE$ac_delim ++AMDEPBACKSLASH!$AMDEPBACKSLASH$ac_delim ++CCDEPMODE!$CCDEPMODE$ac_delim ++am__fastdepCC_TRUE!$am__fastdepCC_TRUE$ac_delim ++am__fastdepCC_FALSE!$am__fastdepCC_FALSE$ac_delim ++DATADIRNAME!$DATADIRNAME$ac_delim ++CPP!$CPP$ac_delim ++GREP!$GREP$ac_delim ++EGREP!$EGREP$ac_delim ++LIBTOOL!$LIBTOOL$ac_delim ++build!$build$ac_delim ++build_cpu!$build_cpu$ac_delim ++build_vendor!$build_vendor$ac_delim ++build_os!$build_os$ac_delim ++host!$host$ac_delim ++host_cpu!$host_cpu$ac_delim ++host_vendor!$host_vendor$ac_delim ++host_os!$host_os$ac_delim ++SED!$SED$ac_delim ++FGREP!$FGREP$ac_delim ++LD!$LD$ac_delim ++DUMPBIN!$DUMPBIN$ac_delim ++ac_ct_DUMPBIN!$ac_ct_DUMPBIN$ac_delim ++NM!$NM$ac_delim ++LN_S!$LN_S$ac_delim ++AR!$AR$ac_delim ++RANLIB!$RANLIB$ac_delim ++lt_ECHO!$lt_ECHO$ac_delim ++DSYMUTIL!$DSYMUTIL$ac_delim ++NMEDIT!$NMEDIT$ac_delim ++LIPO!$LIPO$ac_delim ++OTOOL!$OTOOL$ac_delim ++OTOOL64!$OTOOL64$ac_delim ++GLIB_GENMARSHAL!$GLIB_GENMARSHAL$ac_delim ++DISABLE_DEPRECATED!$DISABLE_DEPRECATED$ac_delim ++AT_SPI_REGISTRYD_DIR!$AT_SPI_REGISTRYD_DIR$ac_delim ++WARN_CFLAGS!$WARN_CFLAGS$ac_delim ++DISABLE_DEPRECATED_CFLAGS!$DISABLE_DEPRECATED_CFLAGS$ac_delim ++PKG_CONFIG!$PKG_CONFIG$ac_delim ++GNOME_SESSION_CFLAGS!$GNOME_SESSION_CFLAGS$ac_delim ++GNOME_SESSION_LIBS!$GNOME_SESSION_LIBS$ac_delim ++SESSION_PROPERTIES_CFLAGS!$SESSION_PROPERTIES_CFLAGS$ac_delim ++SESSION_PROPERTIES_LIBS!$SESSION_PROPERTIES_LIBS$ac_delim ++SPLASH_CFLAGS!$SPLASH_CFLAGS$ac_delim ++SPLASH_LIBS!$SPLASH_LIBS$ac_delim ++COMPAT_CFLAGS!$COMPAT_CFLAGS$ac_delim ++COMPAT_LIBS!$COMPAT_LIBS$ac_delim ++SM_CFLAGS!$SM_CFLAGS$ac_delim ++SM_LIBS!$SM_LIBS$ac_delim ++ICE_CFLAGS!$ICE_CFLAGS$ac_delim ++ICE_LIBS!$ICE_LIBS$ac_delim ++DBUS_GLIB_CFLAGS!$DBUS_GLIB_CFLAGS$ac_delim ++DBUS_GLIB_LIBS!$DBUS_GLIB_LIBS$ac_delim ++GCONF_CFLAGS!$GCONF_CFLAGS$ac_delim ++GCONF_LIBS!$GCONF_LIBS$ac_delim ++EGG_SMCLIENT_CFLAGS!$EGG_SMCLIENT_CFLAGS$ac_delim ++EGG_SMCLIENT_LIBS!$EGG_SMCLIENT_LIBS$ac_delim ++POLKIT_GNOME_CFLAGS!$POLKIT_GNOME_CFLAGS$ac_delim ++POLKIT_GNOME_LIBS!$POLKIT_GNOME_LIBS$ac_delim ++GCONFTOOL!$GCONFTOOL$ac_delim ++GCONF_SCHEMA_CONFIG_SOURCE!$GCONF_SCHEMA_CONFIG_SOURCE$ac_delim ++GCONF_SCHEMA_FILE_DIR!$GCONF_SCHEMA_FILE_DIR$ac_delim ++GCONF_SCHEMAS_INSTALL_TRUE!$GCONF_SCHEMAS_INSTALL_TRUE$ac_delim ++GCONF_SCHEMAS_INSTALL_FALSE!$GCONF_SCHEMAS_INSTALL_FALSE$ac_delim ++GCONF_SANITY_CHECK!$GCONF_SANITY_CHECK$ac_delim ++XMKMF!$XMKMF$ac_delim ++X_CFLAGS!$X_CFLAGS$ac_delim ++X_PRE_LIBS!$X_PRE_LIBS$ac_delim ++X_LIBS!$X_LIBS$ac_delim ++X_EXTRA_LIBS!$X_EXTRA_LIBS$ac_delim ++XTEST_CFLAGS!$XTEST_CFLAGS$ac_delim ++XTEST_LIBS!$XTEST_LIBS$ac_delim ++HAVE_XTEST!$HAVE_XTEST$ac_delim ++XRENDER_CFLAGS!$XRENDER_CFLAGS$ac_delim ++XRENDER_LIBS!$XRENDER_LIBS$ac_delim ++HAVE_XRENDER_TRUE!$HAVE_XRENDER_TRUE$ac_delim ++HAVE_XRENDER_FALSE!$HAVE_XRENDER_FALSE$ac_delim ++HAVE_XRENDER!$HAVE_XRENDER$ac_delim ++XMLTO!$XMLTO$ac_delim ++DOCBOOK_DOCS_ENABLED_TRUE!$DOCBOOK_DOCS_ENABLED_TRUE$ac_delim ++DOCBOOK_DOCS_ENABLED_FALSE!$DOCBOOK_DOCS_ENABLED_FALSE$ac_delim ++XSLTPROC!$XSLTPROC$ac_delim ++GETTEXT_PACKAGE!$GETTEXT_PACKAGE$ac_delim ++MSGFMT_OPTS!$MSGFMT_OPTS$ac_delim ++CATALOGS!$CATALOGS$ac_delim ++CATOBJEXT!$CATOBJEXT$ac_delim ++GMOFILES!$GMOFILES$ac_delim ++INSTOBJEXT!$INSTOBJEXT$ac_delim ++INTLLIBS!$INTLLIBS$ac_delim ++PO_IN_DATADIR_TRUE!$PO_IN_DATADIR_TRUE$ac_delim ++PO_IN_DATADIR_FALSE!$PO_IN_DATADIR_FALSE$ac_delim + _ACEOF + +-fi +- ++ if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 97; then ++ break ++ elif $ac_last_try; then ++ { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 ++echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} ++ { (exit 1); exit 1; }; } ++ else ++ ac_delim="$ac_delim!$ac_delim _$ac_delim!! " ++ fi + done + +- +-oCFLAGS="$CFLAGS" +-CFLAGS="$CFLAGS $X_CFLAGS" +- +-for ac_header in X11/Xtrans/Xtrans.h +-do +-as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` +-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then +- { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 +-$as_echo_n "checking for $ac_header... " >&6; } +-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then +- $as_echo_n "(cached) " >&6 +-fi +-ac_res=`eval 'as_val=${'$as_ac_Header'} +- $as_echo "$as_val"'` +- { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 +-$as_echo "$ac_res" >&6; } +-else +- # Is the header compilable? +-{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5 +-$as_echo_n "checking $ac_header usability... " >&6; } +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-$ac_includes_default +-#include <$ac_header> +-_ACEOF +-rm -f conftest.$ac_objext +-if { (ac_try="$ac_compile" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_compile") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest.$ac_objext; then +- ac_header_compiler=yes +-else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +- ac_header_compiler=no ++ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed` ++if test -n "$ac_eof"; then ++ ac_eof=`echo "$ac_eof" | sort -nru | sed 1q` ++ ac_eof=`expr $ac_eof + 1` + fi + +-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +-{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +-$as_echo "$ac_header_compiler" >&6; } +- +-# Is the header present? +-{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5 +-$as_echo_n "checking $ac_header presence... " >&6; } +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ ++cat >>$CONFIG_STATUS <<_ACEOF ++cat >"\$tmp/subs-2.sed" <<\CEOF$ac_eof ++/@[a-zA-Z_][a-zA-Z_0-9]*@/!b + _ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-#include <$ac_header> ++sed ' ++s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g ++s/^/s,@/; s/!/@,|#_!!_#|/ ++:n ++t n ++s/'"$ac_delim"'$/,g/; t ++s/$/\\/; p ++N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n ++' >>$CONFIG_STATUS >$CONFIG_STATUS <<_ACEOF ++CEOF$ac_eof + _ACEOF +-if { (ac_try="$ac_cpp conftest.$ac_ext" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } >/dev/null && { +- test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || +- test ! -s conftest.err +- }; then +- ac_header_preproc=yes +-else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 + +- ac_header_preproc=no +-fi + +-rm -f conftest.err conftest.$ac_ext +-{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +-$as_echo "$ac_header_preproc" >&6; } ++ac_delim='%!_!# ' ++for ac_last_try in false false false false false :; do ++ cat >conf$$subs.sed <<_ACEOF ++POFILES!$POFILES$ac_delim ++POSUB!$POSUB$ac_delim ++MKINSTALLDIRS!$MKINSTALLDIRS$ac_delim ++PERL!$PERL$ac_delim ++REBUILD!$REBUILD$ac_delim ++LIBOBJS!$LIBOBJS$ac_delim ++LTLIBOBJS!$LTLIBOBJS$ac_delim ++_ACEOF + +-# So? What about this header? +-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in +- yes:no: ) +- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 +-$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 +-$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} +- ac_header_preproc=yes +- ;; +- no:yes:* ) +- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 +-$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 +-$as_echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 +-$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 +-$as_echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 +-$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} +- { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 +-$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} +- ( cat <<\_ASBOX +-## ---------------------------------------------------------------------------- ## +-## Report this to http://bugzilla.gnome.org/enter_bug.cgi?product=gnome-session ## +-## ---------------------------------------------------------------------------- ## +-_ASBOX +- ) | sed "s/^/$as_me: WARNING: /" >&2 +- ;; +-esac +-{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 +-$as_echo_n "checking for $ac_header... " >&6; } +-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then +- $as_echo_n "(cached) " >&6 +-else +- eval "$as_ac_Header=\$ac_header_preproc" +-fi +-ac_res=`eval 'as_val=${'$as_ac_Header'} +- $as_echo "$as_val"'` +- { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 +-$as_echo "$ac_res" >&6; } ++ if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 7; then ++ break ++ elif $ac_last_try; then ++ { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 ++echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} ++ { (exit 1); exit 1; }; } ++ else ++ ac_delim="$ac_delim!$ac_delim _$ac_delim!! " ++ fi ++done + +-fi +-if test `eval 'as_val=${'$as_ac_Header'} +- $as_echo "$as_val"'` = yes; then +- cat >>confdefs.h <<_ACEOF +-#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 ++ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed` ++if test -n "$ac_eof"; then ++ ac_eof=`echo "$ac_eof" | sort -nru | sed 1q` ++ ac_eof=`expr $ac_eof + 1` ++fi ++ ++cat >>$CONFIG_STATUS <<_ACEOF ++cat >"\$tmp/subs-3.sed" <<\CEOF$ac_eof ++/@[a-zA-Z_][a-zA-Z_0-9]*@/!b end ++_ACEOF ++sed ' ++s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g ++s/^/s,@/; s/!/@,|#_!!_#|/ ++:n ++t n ++s/'"$ac_delim"'$/,g/; t ++s/$/\\/; p ++N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n ++' >>$CONFIG_STATUS >$CONFIG_STATUS <<_ACEOF ++:end ++s/|#_!!_#|//g ++CEOF$ac_eof + _ACEOF + ++ ++# VPATH may cause trouble with some makes, so we remove $(srcdir), ++# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and ++# trailing colons and then remove the whole line if VPATH becomes empty ++# (actually we leave an empty line to preserve line numbers). ++if test "x$srcdir" = x.; then ++ ac_vpsub='/^[ ]*VPATH[ ]*=/{ ++s/:*\$(srcdir):*/:/ ++s/:*\${srcdir}:*/:/ ++s/:*@srcdir@:*/:/ ++s/^\([^=]*=[ ]*\):*/\1/ ++s/:*$// ++s/^[^=]*=[ ]*$// ++}' + fi + +-done ++cat >>$CONFIG_STATUS <<\_ACEOF ++fi # test -n "$CONFIG_FILES" + +-CFLAGS="$oCFLAGS" + +-{ $as_echo "$as_me:$LINENO: checking whether to enable ipv6" >&5 +-$as_echo_n "checking whether to enable ipv6... " >&6; } +-# Check whether --enable-ipv6 was given. +-if test "${enable_ipv6+set}" = set; then +- enableval=$enable_ipv6; +-else +- enable_ipv6=yes +-fi ++for ac_tag in :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS ++do ++ case $ac_tag in ++ :[FHLC]) ac_mode=$ac_tag; continue;; ++ esac ++ case $ac_mode$ac_tag in ++ :[FHL]*:*);; ++ :L* | :C*:*) { { echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5 ++echo "$as_me: error: Invalid tag $ac_tag." >&2;} ++ { (exit 1); exit 1; }; };; ++ :[FH]-) ac_tag=-:-;; ++ :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; ++ esac ++ ac_save_IFS=$IFS ++ IFS=: ++ set x $ac_tag ++ IFS=$ac_save_IFS ++ shift ++ ac_file=$1 ++ shift + +-if test $enable_ipv6 = yes; then ++ case $ac_mode in ++ :L) ac_source=$1;; ++ :[FH]) ++ ac_file_inputs= ++ for ac_f ++ do ++ case $ac_f in ++ -) ac_f="$tmp/stdin";; ++ *) # Look for the file first in the build tree, then in the source tree ++ # (if the path is not absolute). The absolute path cannot be DOS-style, ++ # because $ac_f cannot contain `:'. ++ test -f "$ac_f" || ++ case $ac_f in ++ [\\/$]*) false;; ++ *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; ++ esac || ++ { { echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5 ++echo "$as_me: error: cannot find input file: $ac_f" >&2;} ++ { (exit 1); exit 1; }; };; ++ esac ++ ac_file_inputs="$ac_file_inputs $ac_f" ++ done + +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ ++ # Let's still pretend it is `configure' which instantiates (i.e., don't ++ # use $as_me), people would be surprised to read: ++ # /* config.h. Generated by config.status. */ ++ configure_input="Generated from "`IFS=: ++ echo $* | sed 's|^[^:]*/||;s|:[^:]*/|, |g'`" by configure." ++ if test x"$ac_file" != x-; then ++ configure_input="$ac_file. $configure_input" ++ { echo "$as_me:$LINENO: creating $ac_file" >&5 ++echo "$as_me: creating $ac_file" >&6;} ++ fi + +- #include +- #include +-int +-main () +-{ ++ case $ac_tag in ++ *:-:* | *:-) cat >"$tmp/stdin";; ++ esac ++ ;; ++ esac + +- socket(AF_INET6, SOCK_STREAM, 0) ++ ac_dir=`$as_dirname -- "$ac_file" || ++$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ ++ X"$ac_file" : 'X\(//\)[^/]' \| \ ++ X"$ac_file" : 'X\(//\)$' \| \ ++ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || ++echo X"$ac_file" | ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` ++ { as_dir="$ac_dir" ++ case $as_dir in #( ++ -*) as_dir=./$as_dir;; ++ esac ++ test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { ++ as_dirs= ++ while :; do ++ case $as_dir in #( ++ *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #( ++ *) as_qdir=$as_dir;; ++ esac ++ as_dirs="'$as_qdir' $as_dirs" ++ as_dir=`$as_dirname -- "$as_dir" || ++$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ ++ X"$as_dir" : 'X\(//\)[^/]' \| \ ++ X"$as_dir" : 'X\(//\)$' \| \ ++ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || ++echo X"$as_dir" | ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` ++ test -d "$as_dir" && break ++ done ++ test -z "$as_dirs" || eval "mkdir $as_dirs" ++ } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 ++echo "$as_me: error: cannot create directory $as_dir" >&2;} ++ { (exit 1); exit 1; }; }; } ++ ac_builddir=. + +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext +-if { (ac_try="$ac_compile" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; ++case "$ac_dir" in ++.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; ++*) ++ ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` ++ # A ".." for each directory in $ac_dir_suffix. ++ ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'` ++ case $ac_top_builddir_sub in ++ "") ac_top_builddir_sub=. ac_top_build_prefix= ;; ++ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; ++ esac ;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_compile") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest.$ac_objext; then +- have_ipv6=yes +-else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++ac_abs_top_builddir=$ac_pwd ++ac_abs_builddir=$ac_pwd$ac_dir_suffix ++# for backward compatibility: ++ac_top_builddir=$ac_top_build_prefix + +- have_ipv6=no ++case $srcdir in ++ .) # We are building in place. ++ ac_srcdir=. ++ ac_top_srcdir=$ac_top_builddir_sub ++ ac_abs_top_srcdir=$ac_pwd ;; ++ [\\/]* | ?:[\\/]* ) # Absolute name. ++ ac_srcdir=$srcdir$ac_dir_suffix; ++ ac_top_srcdir=$srcdir ++ ac_abs_top_srcdir=$srcdir ;; ++ *) # Relative name. ++ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix ++ ac_top_srcdir=$ac_top_build_prefix$srcdir ++ ac_abs_top_srcdir=$ac_pwd/$srcdir ;; ++esac ++ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix + +-fi + +-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +- { $as_echo "$as_me:$LINENO: result: $have_ipv6" >&5 +-$as_echo "$have_ipv6" >&6; } ++ case $ac_mode in ++ :F) ++ # ++ # CONFIG_FILE ++ # + +- have_getaddrinfo=no +- if test $have_ipv6=yes; then +- { $as_echo "$as_me:$LINENO: checking for getaddrinfo" >&5 +-$as_echo_n "checking for getaddrinfo... " >&6; } +-if test "${ac_cv_func_getaddrinfo+set}" = set; then +- $as_echo_n "(cached) " >&6 +-else +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ ++ case $INSTALL in ++ [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; ++ *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; ++ esac ++ ac_MKDIR_P=$MKDIR_P ++ case $MKDIR_P in ++ [\\/$]* | ?:[\\/]* ) ;; ++ */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;; ++ esac + _ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-/* Define getaddrinfo to an innocuous variant, in case declares getaddrinfo. +- For example, HP-UX 11i declares gettimeofday. */ +-#define getaddrinfo innocuous_getaddrinfo +- +-/* System header to define __stub macros and hopefully few prototypes, +- which can conflict with char getaddrinfo (); below. +- Prefer to if __STDC__ is defined, since +- exists even on freestanding compilers. */ +- +-#ifdef __STDC__ +-# include +-#else +-# include +-#endif +- +-#undef getaddrinfo + +-/* Override any GCC internal prototype to avoid an error. +- Use char because int might match the return type of a GCC +- builtin and then its argument prototype would still apply. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-char getaddrinfo (); +-/* The GNU C library defines this for functions which it implements +- to always fail with ENOSYS. Some functions are actually named +- something starting with __ and the normal name is an alias. */ +-#if defined __stub_getaddrinfo || defined __stub___getaddrinfo +-choke me +-#endif ++cat >>$CONFIG_STATUS <<\_ACEOF ++# If the template does not know about datarootdir, expand it. ++# FIXME: This hack should be removed a few years after 2.60. ++ac_datarootdir_hack=; ac_datarootdir_seen= + +-int +-main () +-{ +-return getaddrinfo (); +- ; +- return 0; ++case `sed -n '/datarootdir/ { ++ p ++ q + } ++/@datadir@/p ++/@docdir@/p ++/@infodir@/p ++/@localedir@/p ++/@mandir@/p ++' $ac_file_inputs` in ++*datarootdir*) ac_datarootdir_seen=yes;; ++*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) ++ { echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 ++echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} + _ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; ++cat >>$CONFIG_STATUS <<_ACEOF ++ ac_datarootdir_hack=' ++ s&@datadir@&$datadir&g ++ s&@docdir@&$docdir&g ++ s&@infodir@&$infodir&g ++ s&@localedir@&$localedir&g ++ s&@mandir@&$mandir&g ++ s&\\\${datarootdir}&$datarootdir&g' ;; + esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then +- ac_cv_func_getaddrinfo=yes +-else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++_ACEOF + +- ac_cv_func_getaddrinfo=no +-fi ++# Neutralize VPATH when `$srcdir' = `.'. ++# Shell code in configure.ac might set extrasub. ++# FIXME: do we really want to maintain this feature? ++cat >>$CONFIG_STATUS <<_ACEOF ++ sed "$ac_vpsub ++$extrasub ++_ACEOF ++cat >>$CONFIG_STATUS <<\_ACEOF ++:t ++/@[a-zA-Z_][a-zA-Z_0-9]*@/!b ++s&@configure_input@&$configure_input&;t t ++s&@top_builddir@&$ac_top_builddir_sub&;t t ++s&@srcdir@&$ac_srcdir&;t t ++s&@abs_srcdir@&$ac_abs_srcdir&;t t ++s&@top_srcdir@&$ac_top_srcdir&;t t ++s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t ++s&@builddir@&$ac_builddir&;t t ++s&@abs_builddir@&$ac_abs_builddir&;t t ++s&@abs_top_builddir@&$ac_abs_top_builddir&;t t ++s&@INSTALL@&$ac_INSTALL&;t t ++s&@MKDIR_P@&$ac_MKDIR_P&;t t ++$ac_datarootdir_hack ++" $ac_file_inputs | sed -f "$tmp/subs-1.sed" | sed -f "$tmp/subs-2.sed" | sed -f "$tmp/subs-3.sed" >$tmp/out + +-rm -rf conftest.dSYM +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext +-fi +-{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_getaddrinfo" >&5 +-$as_echo "$ac_cv_func_getaddrinfo" >&6; } +-if test $ac_cv_func_getaddrinfo = yes; then +- have_getaddrinfo=yes +-fi ++test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && ++ { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } && ++ { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } && ++ { echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir' ++which seems to be undefined. Please make sure it is defined." >&5 ++echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' ++which seems to be undefined. Please make sure it is defined." >&2;} + +- if test $have_getaddrinfo != yes; then +- # getaddrinfo is not in the default libraries. See if it's in some other. +- for lib in bsd socket inet; do +- as_ac_Lib=`$as_echo "ac_cv_lib_$lib''_getaddrinfo" | $as_tr_sh` +-{ $as_echo "$as_me:$LINENO: checking for getaddrinfo in -l$lib" >&5 +-$as_echo_n "checking for getaddrinfo in -l$lib... " >&6; } +-if { as_var=$as_ac_Lib; eval "test \"\${$as_var+set}\" = set"; }; then +- $as_echo_n "(cached) " >&6 +-else +- ac_check_lib_save_LIBS=$LIBS +-LIBS="-l$lib $LIBS" +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ ++ rm -f "$tmp/stdin" ++ case $ac_file in ++ -) cat "$tmp/out"; rm -f "$tmp/out";; ++ *) rm -f "$ac_file"; mv "$tmp/out" $ac_file;; ++ esac ++ ;; ++ :H) ++ # ++ # CONFIG_HEADER ++ # + _ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ + +-/* Override any GCC internal prototype to avoid an error. +- Use char because int might match the return type of a GCC +- builtin and then its argument prototype would still apply. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-char getaddrinfo (); +-int +-main () +-{ +-return getaddrinfo (); +- ; +- return 0; +-} ++# Transform confdefs.h into a sed script `conftest.defines', that ++# substitutes the proper values into config.h.in to produce config.h. ++rm -f conftest.defines conftest.tail ++# First, append a space to every undef/define line, to ease matching. ++echo 's/$/ /' >conftest.defines ++# Then, protect against being on the right side of a sed subst, or in ++# an unquoted here document, in config.status. If some macros were ++# called several times there might be several #defines for the same ++# symbol, which is useless. But do not sort them, since the last ++# AC_DEFINE must be honored. ++ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* ++# These sed commands are passed to sed as "A NAME B PARAMS C VALUE D", where ++# NAME is the cpp macro being defined, VALUE is the value it is being given. ++# PARAMS is the parameter list in the macro definition--in most cases, it's ++# just an empty string. ++ac_dA='s,^\\([ #]*\\)[^ ]*\\([ ]*' ++ac_dB='\\)[ (].*,\\1define\\2' ++ac_dC=' ' ++ac_dD=' ,' ++ ++uniq confdefs.h | ++ sed -n ' ++ t rset ++ :rset ++ s/^[ ]*#[ ]*define[ ][ ]*// ++ t ok ++ d ++ :ok ++ s/[\\&,]/\\&/g ++ s/^\('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/ '"$ac_dA"'\1'"$ac_dB"'\2'"${ac_dC}"'\3'"$ac_dD"'/p ++ s/^\('"$ac_word_re"'\)[ ]*\(.*\)/'"$ac_dA"'\1'"$ac_dB$ac_dC"'\2'"$ac_dD"'/p ++ ' >>conftest.defines ++ ++# Remove the space that was appended to ease matching. ++# Then replace #undef with comments. This is necessary, for ++# example, in the case of _POSIX_SOURCE, which is predefined and required ++# on some systems where configure will not decide to define it. ++# (The regexp can be short, since the line contains either #define or #undef.) ++echo 's/ $// ++s,^[ #]*u.*,/* & */,' >>conftest.defines ++ ++# Break up conftest.defines: ++ac_max_sed_lines=50 ++ ++# First sed command is: sed -f defines.sed $ac_file_inputs >"$tmp/out1" ++# Second one is: sed -f defines.sed "$tmp/out1" >"$tmp/out2" ++# Third one will be: sed -f defines.sed "$tmp/out2" >"$tmp/out1" ++# et cetera. ++ac_in='$ac_file_inputs' ++ac_out='"$tmp/out1"' ++ac_nxt='"$tmp/out2"' ++ ++while : ++do ++ # Write a here document: ++ cat >>$CONFIG_STATUS <<_ACEOF ++ # First, check the format of the line: ++ cat >"\$tmp/defines.sed" <<\\CEOF ++/^[ ]*#[ ]*undef[ ][ ]*$ac_word_re[ ]*\$/b def ++/^[ ]*#[ ]*define[ ][ ]*$ac_word_re[( ]/b def ++b ++:def + _ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (ac_try="$ac_link" +-case "(($ac_try" in +- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; +- *) ac_try_echo=$ac_try;; +-esac +-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +-$as_echo "$ac_try_echo") >&5 +- (eval "$ac_link") 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && { +- test -z "$ac_c_werror_flag" || +- test ! -s conftest.err +- } && test -s conftest$ac_exeext && { +- test "$cross_compiling" = yes || +- $as_test_x conftest$ac_exeext +- }; then +- eval "$as_ac_Lib=yes" +-else +- $as_echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++ sed ${ac_max_sed_lines}q conftest.defines >>$CONFIG_STATUS ++ echo 'CEOF ++ sed -f "$tmp/defines.sed"' "$ac_in >$ac_out" >>$CONFIG_STATUS ++ ac_in=$ac_out; ac_out=$ac_nxt; ac_nxt=$ac_in ++ sed 1,${ac_max_sed_lines}d conftest.defines >conftest.tail ++ grep . conftest.tail >/dev/null || break ++ rm -f conftest.defines ++ mv conftest.tail conftest.defines ++done ++rm -f conftest.defines conftest.tail + +- eval "$as_ac_Lib=no" +-fi ++echo "ac_result=$ac_in" >>$CONFIG_STATUS ++cat >>$CONFIG_STATUS <<\_ACEOF ++ if test x"$ac_file" != x-; then ++ echo "/* $configure_input */" >"$tmp/config.h" ++ cat "$ac_result" >>"$tmp/config.h" ++ if diff $ac_file "$tmp/config.h" >/dev/null 2>&1; then ++ { echo "$as_me:$LINENO: $ac_file is unchanged" >&5 ++echo "$as_me: $ac_file is unchanged" >&6;} ++ else ++ rm -f $ac_file ++ mv "$tmp/config.h" $ac_file ++ fi ++ else ++ echo "/* $configure_input */" ++ cat "$ac_result" ++ fi ++ rm -f "$tmp/out12" ++# Compute $ac_file's index in $config_headers. ++_am_arg=$ac_file ++_am_stamp_count=1 ++for _am_header in $config_headers :; do ++ case $_am_header in ++ $_am_arg | $_am_arg:* ) ++ break ;; ++ * ) ++ _am_stamp_count=`expr $_am_stamp_count + 1` ;; ++ esac ++done ++echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" || ++$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ ++ X"$_am_arg" : 'X\(//\)[^/]' \| \ ++ X"$_am_arg" : 'X\(//\)$' \| \ ++ X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null || ++echo X"$_am_arg" | ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'`/stamp-h$_am_stamp_count ++ ;; + +-rm -rf conftest.dSYM +-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ +- conftest$ac_exeext conftest.$ac_ext +-LIBS=$ac_check_lib_save_LIBS +-fi +-ac_res=`eval 'as_val=${'$as_ac_Lib'} +- $as_echo "$as_val"'` +- { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 +-$as_echo "$ac_res" >&6; } +-if test `eval 'as_val=${'$as_ac_Lib'} +- $as_echo "$as_val"'` = yes; then +- LIBS="$LIBS -l$lib";have_getaddrinfo=yes; break +-fi ++ :C) { echo "$as_me:$LINENO: executing $ac_file commands" >&5 ++echo "$as_me: executing $ac_file commands" >&6;} ++ ;; ++ esac + +- done +- fi +- if test $have_getaddrinfo=yes; then + +-cat >>confdefs.h <<\_ACEOF +-#define ENABLE_IPV6 1 +-_ACEOF ++ case $ac_file$ac_mode in ++ "depfiles":C) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do ++ # Strip MF so we end up with the name of the file. ++ mf=`echo "$mf" | sed -e 's/:.*$//'` ++ # Check whether this is an Automake generated Makefile or not. ++ # We used to match only the files named `Makefile.in', but ++ # some people rename them; so instead we look at the file content. ++ # Grep'ing the first line is not enough: some people post-process ++ # each Makefile.in and add a new line on top of each file to say so. ++ # Grep'ing the whole file is not good either: AIX grep has a line ++ # limit of 2048, but all sed's we know have understand at least 4000. ++ if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then ++ dirpart=`$as_dirname -- "$mf" || ++$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ ++ X"$mf" : 'X\(//\)[^/]' \| \ ++ X"$mf" : 'X\(//\)$' \| \ ++ X"$mf" : 'X\(/\)' \| . 2>/dev/null || ++echo X"$mf" | ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` ++ else ++ continue ++ fi ++ # Extract the definition of DEPDIR, am__include, and am__quote ++ # from the Makefile without running `make'. ++ DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` ++ test -z "$DEPDIR" && continue ++ am__include=`sed -n 's/^am__include = //p' < "$mf"` ++ test -z "am__include" && continue ++ am__quote=`sed -n 's/^am__quote = //p' < "$mf"` ++ # When using ansi2knr, U may be empty or an underscore; expand it ++ U=`sed -n 's/^U = //p' < "$mf"` ++ # Find all dependency output files, they are included files with ++ # $(DEPDIR) in their names. We invoke sed twice because it is the ++ # simplest approach to changing $(DEPDIR) to its actual value in the ++ # expansion. ++ for file in `sed -n " ++ s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ ++ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do ++ # Make sure the directory exists. ++ test -f "$dirpart/$file" && continue ++ fdir=`$as_dirname -- "$file" || ++$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ ++ X"$file" : 'X\(//\)[^/]' \| \ ++ X"$file" : 'X\(//\)$' \| \ ++ X"$file" : 'X\(/\)' \| . 2>/dev/null || ++echo X"$file" | ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` ++ { as_dir=$dirpart/$fdir ++ case $as_dir in #( ++ -*) as_dir=./$as_dir;; ++ esac ++ test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { ++ as_dirs= ++ while :; do ++ case $as_dir in #( ++ *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #( ++ *) as_qdir=$as_dir;; ++ esac ++ as_dirs="'$as_qdir' $as_dirs" ++ as_dir=`$as_dirname -- "$as_dir" || ++$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ ++ X"$as_dir" : 'X\(//\)[^/]' \| \ ++ X"$as_dir" : 'X\(//\)$' \| \ ++ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || ++echo X"$as_dir" | ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` ++ test -d "$as_dir" && break ++ done ++ test -z "$as_dirs" || eval "mkdir $as_dirs" ++ } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 ++echo "$as_me: error: cannot create directory $as_dir" >&2;} ++ { (exit 1); exit 1; }; }; } ++ # echo "creating $dirpart/$file" ++ echo '# dummy' > "$dirpart/$file" ++ done ++done ++ ;; ++ "libtool":C) + ++ # See if we are running on zsh, and set the options which allow our ++ # commands through without removal of \ escapes. ++ if test -n "${ZSH_VERSION+set}" ; then ++ setopt NO_GLOB_SUBST + fi +- fi +-fi + +-# Don't use AC_PROG_AWK since we need the full pathname. +-for ac_prog in mawk gawk nawk awk +-do +- # Extract the first word of "$ac_prog", so it can be a program name with args. +-set dummy $ac_prog; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } +-if test "${ac_cv_path_AWK+set}" = set; then +- $as_echo_n "(cached) " >&6 +-else +- case $AWK in +- [\\/]* | ?:[\\/]*) +- ac_cv_path_AWK="$AWK" # Let the user override the test with a path. +- ;; +- *) +- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +-for as_dir in $PATH +-do +- IFS=$as_save_IFS +- test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do +- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then +- ac_cv_path_AWK="$as_dir/$ac_word$ac_exec_ext" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 +- break 2 +- fi +-done +-done +-IFS=$as_save_IFS ++ cfgfile="${ofile}T" ++ trap "$RM \"$cfgfile\"; exit 1" 1 2 15 ++ $RM "$cfgfile" + +- ;; +-esac +-fi +-AWK=$ac_cv_path_AWK +-if test -n "$AWK"; then +- { $as_echo "$as_me:$LINENO: result: $AWK" >&5 +-$as_echo "$AWK" >&6; } +-else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } +-fi ++ cat <<_LT_EOF >> "$cfgfile" ++#! $SHELL + ++# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. ++# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION ++# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: ++# NOTE: Changes made to this file will be lost: look at ltmain.sh. ++# ++# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, ++# 2006, 2007, 2008 Free Software Foundation, Inc. ++# Written by Gordon Matzigkeit, 1996 ++# ++# This file is part of GNU Libtool. ++# ++# GNU Libtool is free software; you can redistribute it and/or ++# modify it under the terms of the GNU General Public License as ++# published by the Free Software Foundation; either version 2 of ++# the License, or (at your option) any later version. ++# ++# As a special exception to the GNU General Public License, ++# if you distribute this file as part of a program or library that ++# is built using GNU Libtool, you may include this file under the ++# same distribution terms that you use for the rest of that program. ++# ++# GNU Libtool is distributed in the hope that it will be useful, ++# but WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++# GNU General Public License for more details. ++# ++# You should have received a copy of the GNU General Public License ++# along with GNU Libtool; see the file COPYING. If not, a copy ++# can be downloaded from http://www.gnu.org/licenses/gpl.html, or ++# obtained by writing to the Free Software Foundation, Inc., ++# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + +- test -n "$AWK" && break +-done + +-for ac_prog in perl5 perl +-do +- # Extract the first word of "$ac_prog", so it can be a program name with args. +-set dummy $ac_prog; ac_word=$2 +-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +-$as_echo_n "checking for $ac_word... " >&6; } +-if test "${ac_cv_path_PERL+set}" = set; then +- $as_echo_n "(cached) " >&6 +-else +- case $PERL in +- [\\/]* | ?:[\\/]*) +- ac_cv_path_PERL="$PERL" # Let the user override the test with a path. +- ;; +- *) +- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +-for as_dir in $PATH +-do +- IFS=$as_save_IFS +- test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do +- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then +- ac_cv_path_PERL="$as_dir/$ac_word$ac_exec_ext" +- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 +- break 2 +- fi +-done +-done +-IFS=$as_save_IFS ++# The names of the tagged configurations supported by this script. ++available_tags="" + +- ;; +-esac +-fi +-PERL=$ac_cv_path_PERL +-if test -n "$PERL"; then +- { $as_echo "$as_me:$LINENO: result: $PERL" >&5 +-$as_echo "$PERL" >&6; } +-else +- { $as_echo "$as_me:$LINENO: result: no" >&5 +-$as_echo "no" >&6; } +-fi ++# ### BEGIN LIBTOOL CONFIG + ++# Which release of libtool.m4 was used? ++macro_version=$macro_version ++macro_revision=$macro_revision + +- test -n "$PERL" && break +-done ++# Whether or not to build shared libraries. ++build_libtool_libs=$enable_shared + ++# Whether or not to build static libraries. ++build_old_libs=$enable_static + +-# define a MAINT-like variable REBUILD which is set if Perl +-# and awk are found, so autogenerated sources can be rebuilt +-# Check whether --enable-rebuilds was given. +-if test "${enable_rebuilds+set}" = set; then +- enableval=$enable_rebuilds; +-else +- enable_rebuilds=yes +-fi ++# What type of objects to build. ++pic_mode=$pic_mode + +-REBUILD=\# +-if test "x$enable_rebuilds" = "xyes" && \ +- test -n "$PERL" && \ +- $PERL -e 'exit !($] >= 5.002)' > /dev/null 2>&1 && \ +- test -n "$AWK" ; then +- REBUILD= +-fi ++# Whether or not to optimize for fast installation. ++fast_install=$enable_fast_install + ++# The host system. ++host_alias=$host_alias ++host=$host ++host_os=$host_os + +-ac_config_files="$ac_config_files Makefile capplet/Makefile compat/Makefile compat/at-spi-registryd-wrapper.desktop.in.in compat/gnome-settings-daemon-helper.desktop.in.in doc/Makefile doc/dbus/Makefile doc/dbus/gnome-session.xml doc/man/Makefile doc/man/gnome-session.1 doc/man/default.session.5 data/Makefile data/gnome-wm.desktop.in data/session-properties.desktop.in data/icons/Makefile data/icons/16x16/Makefile data/icons/22x22/Makefile data/icons/24x24/Makefile data/icons/32x32/Makefile data/icons/48x48/Makefile data/icons/scalable/Makefile egg/Makefile gnome-session/Makefile splash/Makefile splash/gnome-session-splash.desktop.in.in tools/Makefile po/Makefile.in" ++# The build system. ++build_alias=$build_alias ++build=$build ++build_os=$build_os + +-cat >confcache <<\_ACEOF +-# This file is a shell script that caches the results of configure +-# tests run on this system so they can be shared between configure +-# scripts and configure runs, see configure's option --config-cache. +-# It is not useful on other systems. If it contains results you don't +-# want to keep, you may remove or edit it. +-# +-# config.status only pays attention to the cache file if you give it +-# the --recheck option to rerun configure. +-# +-# `ac_cv_env_foo' variables (set or unset) will be overridden when +-# loading this file, other *unset* `ac_cv_foo' will be assigned the +-# following values. ++# A sed program that does not truncate output. ++SED=$lt_SED + +-_ACEOF ++# Sed that helps us avoid accidentally triggering echo(1) options like -n. ++Xsed="\$SED -e 1s/^X//" + +-# The following way of writing the cache mishandles newlines in values, +-# but we know of no workaround that is simple, portable, and efficient. +-# So, we kill variables containing newlines. +-# Ultrix sh set writes to stderr and can't be redirected directly, +-# and sets the high bit in the cache file unless we assign to the vars. +-( +- for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do +- eval ac_val=\$$ac_var +- case $ac_val in #( +- *${as_nl}*) +- case $ac_var in #( +- *_cv_*) { $as_echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5 +-$as_echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;; +- esac +- case $ac_var in #( +- _ | IFS | as_nl) ;; #( +- BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( +- *) $as_unset $ac_var ;; +- esac ;; +- esac +- done ++# A grep program that handles long lines. ++GREP=$lt_GREP + +- (set) 2>&1 | +- case $as_nl`(ac_space=' '; set) 2>&1` in #( +- *${as_nl}ac_space=\ *) +- # `set' does not quote correctly, so add quotes (double-quote +- # substitution turns \\\\ into \\, and sed turns \\ into \). +- sed -n \ +- "s/'/'\\\\''/g; +- s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" +- ;; #( +- *) +- # `set' quotes correctly as required by POSIX, so do not add quotes. +- sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" +- ;; +- esac | +- sort +-) | +- sed ' +- /^ac_cv_env_/b end +- t clear +- :clear +- s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ +- t end +- s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ +- :end' >>confcache +-if diff "$cache_file" confcache >/dev/null 2>&1; then :; else +- if test -w "$cache_file"; then +- test "x$cache_file" != "x/dev/null" && +- { $as_echo "$as_me:$LINENO: updating cache $cache_file" >&5 +-$as_echo "$as_me: updating cache $cache_file" >&6;} +- cat confcache >$cache_file +- else +- { $as_echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5 +-$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} +- fi +-fi +-rm -f confcache ++# An ERE matcher. ++EGREP=$lt_EGREP + +-test "x$prefix" = xNONE && prefix=$ac_default_prefix +-# Let make expand exec_prefix. +-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' ++# A literal string matcher. ++FGREP=$lt_FGREP + +-DEFS=-DHAVE_CONFIG_H ++# A BSD- or MS-compatible name lister. ++NM=$lt_NM + +-ac_libobjs= +-ac_ltlibobjs= +-for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue +- # 1. Remove the extension, and $U if already installed. +- ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' +- ac_i=`$as_echo "$ac_i" | sed "$ac_script"` +- # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR +- # will be set to the directory where LIBOBJS objects are built. +- ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext" +- ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo' +-done +-LIBOBJS=$ac_libobjs ++# Whether we need soft or hard links. ++LN_S=$lt_LN_S + +-LTLIBOBJS=$ac_ltlibobjs ++# What is the maximum length of a command? ++max_cmd_len=$max_cmd_len + ++# Object file suffix (normally "o"). ++objext=$ac_objext + +-if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then +- { { $as_echo "$as_me:$LINENO: error: conditional \"MAINTAINER_MODE\" was never defined. +-Usually this means the macro was only invoked conditionally." >&5 +-$as_echo "$as_me: error: conditional \"MAINTAINER_MODE\" was never defined. +-Usually this means the macro was only invoked conditionally." >&2;} +- { (exit 1); exit 1; }; } +-fi +-if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then +- { { $as_echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined. +-Usually this means the macro was only invoked conditionally." >&5 +-$as_echo "$as_me: error: conditional \"AMDEP\" was never defined. +-Usually this means the macro was only invoked conditionally." >&2;} +- { (exit 1); exit 1; }; } +-fi +-if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then +- { { $as_echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined. +-Usually this means the macro was only invoked conditionally." >&5 +-$as_echo "$as_me: error: conditional \"am__fastdepCC\" was never defined. +-Usually this means the macro was only invoked conditionally." >&2;} +- { (exit 1); exit 1; }; } +-fi ++# Executable file suffix (normally ""). ++exeext=$exeext + +- ac_config_commands="$ac_config_commands po/stamp-it" ++# whether the shell understands "unset". ++lt_unset=$lt_unset + ++# turn spaces into newlines. ++SP2NL=$lt_lt_SP2NL + +-if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then +- { { $as_echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined. +-Usually this means the macro was only invoked conditionally." >&5 +-$as_echo "$as_me: error: conditional \"am__fastdepCC\" was never defined. +-Usually this means the macro was only invoked conditionally." >&2;} +- { (exit 1); exit 1; }; } +-fi +-if test -z "${am__fastdepCXX_TRUE}" && test -z "${am__fastdepCXX_FALSE}"; then +- { { $as_echo "$as_me:$LINENO: error: conditional \"am__fastdepCXX\" was never defined. +-Usually this means the macro was only invoked conditionally." >&5 +-$as_echo "$as_me: error: conditional \"am__fastdepCXX\" was never defined. +-Usually this means the macro was only invoked conditionally." >&2;} +- { (exit 1); exit 1; }; } +-fi +-if test -z "${GCONF_SCHEMAS_INSTALL_TRUE}" && test -z "${GCONF_SCHEMAS_INSTALL_FALSE}"; then +- { { $as_echo "$as_me:$LINENO: error: conditional \"GCONF_SCHEMAS_INSTALL\" was never defined. +-Usually this means the macro was only invoked conditionally." >&5 +-$as_echo "$as_me: error: conditional \"GCONF_SCHEMAS_INSTALL\" was never defined. +-Usually this means the macro was only invoked conditionally." >&2;} +- { (exit 1); exit 1; }; } +-fi +-if test -z "${HAVE_XRENDER_TRUE}" && test -z "${HAVE_XRENDER_FALSE}"; then +- { { $as_echo "$as_me:$LINENO: error: conditional \"HAVE_XRENDER\" was never defined. +-Usually this means the macro was only invoked conditionally." >&5 +-$as_echo "$as_me: error: conditional \"HAVE_XRENDER\" was never defined. +-Usually this means the macro was only invoked conditionally." >&2;} +- { (exit 1); exit 1; }; } +-fi +-if test -z "${DOCBOOK_DOCS_ENABLED_TRUE}" && test -z "${DOCBOOK_DOCS_ENABLED_FALSE}"; then +- { { $as_echo "$as_me:$LINENO: error: conditional \"DOCBOOK_DOCS_ENABLED\" was never defined. +-Usually this means the macro was only invoked conditionally." >&5 +-$as_echo "$as_me: error: conditional \"DOCBOOK_DOCS_ENABLED\" was never defined. +-Usually this means the macro was only invoked conditionally." >&2;} +- { (exit 1); exit 1; }; } +-fi ++# turn newlines into spaces. ++NL2SP=$lt_lt_NL2SP + +-: ${CONFIG_STATUS=./config.status} +-ac_write_fail=0 +-ac_clean_files_save=$ac_clean_files +-ac_clean_files="$ac_clean_files $CONFIG_STATUS" +-{ $as_echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5 +-$as_echo "$as_me: creating $CONFIG_STATUS" >&6;} +-cat >$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +-#! $SHELL +-# Generated by $as_me. +-# Run this file to recreate the current configuration. +-# Compiler output produced by configure, useful for debugging +-# configure, is in config.log if it exists. ++# How to create reloadable object files. ++reload_flag=$lt_reload_flag ++reload_cmds=$lt_reload_cmds + +-debug=false +-ac_cs_recheck=false +-ac_cs_silent=false +-SHELL=\${CONFIG_SHELL-$SHELL} +-_ACEOF ++# Method to check whether dependent libraries are shared objects. ++deplibs_check_method=$lt_deplibs_check_method + +-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +-## --------------------- ## +-## M4sh Initialization. ## +-## --------------------- ## ++# Command to use when deplibs_check_method == "file_magic". ++file_magic_cmd=$lt_file_magic_cmd + +-# Be more Bourne compatible +-DUALCASE=1; export DUALCASE # for MKS sh +-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then +- emulate sh +- NULLCMD=: +- # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which +- # is contrary to our usage. Disable this feature. +- alias -g '${1+"$@"}'='"$@"' +- setopt NO_GLOB_SUBST +-else +- case `(set -o) 2>/dev/null` in +- *posix*) set -o posix ;; +-esac ++# The archiver. ++AR=$lt_AR ++AR_FLAGS=$lt_AR_FLAGS + +-fi ++# A symbol stripping program. ++STRIP=$lt_STRIP + ++# Commands used to install an old-style archive. ++RANLIB=$lt_RANLIB ++old_postinstall_cmds=$lt_old_postinstall_cmds ++old_postuninstall_cmds=$lt_old_postuninstall_cmds + ++# A C compiler. ++LTCC=$lt_CC + ++# LTCC compiler flags. ++LTCFLAGS=$lt_CFLAGS + +-# PATH needs CR +-# Avoid depending upon Character Ranges. +-as_cr_letters='abcdefghijklmnopqrstuvwxyz' +-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +-as_cr_Letters=$as_cr_letters$as_cr_LETTERS +-as_cr_digits='0123456789' +-as_cr_alnum=$as_cr_Letters$as_cr_digits ++# Take the output of nm and produce a listing of raw symbols and C names. ++global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe + +-as_nl=' +-' +-export as_nl +-# Printing a long string crashes Solaris 7 /usr/bin/printf. +-as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo +-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo +-if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then +- as_echo='printf %s\n' +- as_echo_n='printf %s' +-else +- if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then +- as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' +- as_echo_n='/usr/ucb/echo -n' +- else +- as_echo_body='eval expr "X$1" : "X\\(.*\\)"' +- as_echo_n_body='eval +- arg=$1; +- case $arg in +- *"$as_nl"*) +- expr "X$arg" : "X\\(.*\\)$as_nl"; +- arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; +- esac; +- expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" +- ' +- export as_echo_n_body +- as_echo_n='sh -c $as_echo_n_body as_echo' +- fi +- export as_echo_body +- as_echo='sh -c $as_echo_body as_echo' +-fi ++# Transform the output of nm in a proper C declaration. ++global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl + +-# The user is always right. +-if test "${PATH_SEPARATOR+set}" != set; then +- PATH_SEPARATOR=: +- (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { +- (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || +- PATH_SEPARATOR=';' +- } +-fi ++# Transform the output of nm in a C name address pair. ++global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address + +-# Support unset when possible. +-if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then +- as_unset=unset +-else +- as_unset=false +-fi ++# Transform the output of nm in a C name address pair when lib prefix is needed. ++global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix + ++# The name of the directory that contains temporary libtool files. ++objdir=$objdir + +-# IFS +-# We need space, tab and new line, in precisely that order. Quoting is +-# there to prevent editors from complaining about space-tab. +-# (If _AS_PATH_WALK were called with IFS unset, it would disable word +-# splitting by setting IFS to empty value.) +-IFS=" "" $as_nl" ++# Shell to use when invoking shell scripts. ++SHELL=$lt_SHELL + +-# Find who we are. Look in the path if we contain no directory separator. +-case $0 in +- *[\\/]* ) as_myself=$0 ;; +- *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +-for as_dir in $PATH +-do +- IFS=$as_save_IFS +- test -z "$as_dir" && as_dir=. +- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break +-done +-IFS=$as_save_IFS ++# An echo program that does not interpret backslashes. ++ECHO=$lt_ECHO + +- ;; +-esac +-# We did not find ourselves, most probably we were run as `sh COMMAND' +-# in which case we are not to be found in the path. +-if test "x$as_myself" = x; then +- as_myself=$0 +-fi +-if test ! -f "$as_myself"; then +- $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 +- { (exit 1); exit 1; } +-fi ++# Used to examine libraries when file_magic_cmd begins with "file". ++MAGIC_CMD=$MAGIC_CMD + +-# Work around bugs in pre-3.0 UWIN ksh. +-for as_var in ENV MAIL MAILPATH +-do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var +-done +-PS1='$ ' +-PS2='> ' +-PS4='+ ' ++# Must we lock files when doing compilation? ++need_locks=$lt_need_locks + +-# NLS nuisances. +-LC_ALL=C +-export LC_ALL +-LANGUAGE=C +-export LANGUAGE ++# Tool to manipulate archived DWARF debug symbol files on Mac OS X. ++DSYMUTIL=$lt_DSYMUTIL + +-# Required to use basename. +-if expr a : '\(a\)' >/dev/null 2>&1 && +- test "X`expr 00001 : '.*\(...\)'`" = X001; then +- as_expr=expr +-else +- as_expr=false +-fi ++# Tool to change global to local symbols on Mac OS X. ++NMEDIT=$lt_NMEDIT + +-if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then +- as_basename=basename +-else +- as_basename=false +-fi ++# Tool to manipulate fat objects and archives on Mac OS X. ++LIPO=$lt_LIPO + ++# ldd/readelf like tool for Mach-O binaries on Mac OS X. ++OTOOL=$lt_OTOOL + +-# Name of the executable. +-as_me=`$as_basename -- "$0" || +-$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ +- X"$0" : 'X\(//\)$' \| \ +- X"$0" : 'X\(/\)' \| . 2>/dev/null || +-$as_echo X/"$0" | +- sed '/^.*\/\([^/][^/]*\)\/*$/{ +- s//\1/ +- q +- } +- /^X\/\(\/\/\)$/{ +- s//\1/ +- q +- } +- /^X\/\(\/\).*/{ +- s//\1/ +- q +- } +- s/.*/./; q'` ++# ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4. ++OTOOL64=$lt_OTOOL64 + +-# CDPATH. +-$as_unset CDPATH ++# Old archive suffix (normally "a"). ++libext=$libext + ++# Shared library suffix (normally ".so"). ++shrext_cmds=$lt_shrext_cmds + ++# The commands to extract the exported symbol list from a shared archive. ++extract_expsyms_cmds=$lt_extract_expsyms_cmds + +- as_lineno_1=$LINENO +- as_lineno_2=$LINENO +- test "x$as_lineno_1" != "x$as_lineno_2" && +- test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { ++# Variables whose values should be saved in libtool wrapper scripts and ++# restored at link time. ++variables_saved_for_relink=$lt_variables_saved_for_relink + +- # Create $as_me.lineno as a copy of $as_myself, but with $LINENO +- # uniformly replaced by the line number. The first 'sed' inserts a +- # line-number line after each line using $LINENO; the second 'sed' +- # does the real work. The second script uses 'N' to pair each +- # line-number line with the line containing $LINENO, and appends +- # trailing '-' during substitution so that $LINENO is not a special +- # case at line end. +- # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the +- # scripts with optimization help from Paolo Bonzini. Blame Lee +- # E. McMahon (1931-1989) for sed's syntax. :-) +- sed -n ' +- p +- /[$]LINENO/= +- ' <$as_myself | +- sed ' +- s/[$]LINENO.*/&-/ +- t lineno +- b +- :lineno +- N +- :loop +- s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ +- t loop +- s/-\n.*// +- ' >$as_me.lineno && +- chmod +x "$as_me.lineno" || +- { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 +- { (exit 1); exit 1; }; } ++# Do we need the "lib" prefix for modules? ++need_lib_prefix=$need_lib_prefix + +- # Don't try to exec as it changes $[0], causing all sort of problems +- # (the dirname of $[0] is not the place where we might find the +- # original and so on. Autoconf is especially sensitive to this). +- . "./$as_me.lineno" +- # Exit status is that of the last command. +- exit +-} ++# Do we need a version for libraries? ++need_version=$need_version + ++# Library versioning type. ++version_type=$version_type + +-if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then +- as_dirname=dirname +-else +- as_dirname=false +-fi ++# Shared library runtime path variable. ++runpath_var=$runpath_var + +-ECHO_C= ECHO_N= ECHO_T= +-case `echo -n x` in +--n*) +- case `echo 'x\c'` in +- *c*) ECHO_T=' ';; # ECHO_T is single tab character. +- *) ECHO_C='\c';; +- esac;; +-*) +- ECHO_N='-n';; +-esac +-if expr a : '\(a\)' >/dev/null 2>&1 && +- test "X`expr 00001 : '.*\(...\)'`" = X001; then +- as_expr=expr +-else +- as_expr=false +-fi ++# Shared library path variable. ++shlibpath_var=$shlibpath_var + +-rm -f conf$$ conf$$.exe conf$$.file +-if test -d conf$$.dir; then +- rm -f conf$$.dir/conf$$.file +-else +- rm -f conf$$.dir +- mkdir conf$$.dir 2>/dev/null +-fi +-if (echo >conf$$.file) 2>/dev/null; then +- if ln -s conf$$.file conf$$ 2>/dev/null; then +- as_ln_s='ln -s' +- # ... but there are two gotchas: +- # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. +- # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. +- # In both cases, we have to default to `cp -p'. +- ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || +- as_ln_s='cp -p' +- elif ln conf$$.file conf$$ 2>/dev/null; then +- as_ln_s=ln +- else +- as_ln_s='cp -p' +- fi +-else +- as_ln_s='cp -p' +-fi +-rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file +-rmdir conf$$.dir 2>/dev/null ++# Is shlibpath searched before the hard-coded library search path? ++shlibpath_overrides_runpath=$shlibpath_overrides_runpath + +-if mkdir -p . 2>/dev/null; then +- as_mkdir_p=: +-else +- test -d ./-p && rmdir ./-p +- as_mkdir_p=false +-fi ++# Format of library name prefix. ++libname_spec=$lt_libname_spec + +-if test -x / >/dev/null 2>&1; then +- as_test_x='test -x' +-else +- if ls -dL / >/dev/null 2>&1; then +- as_ls_L_option=L +- else +- as_ls_L_option= +- fi +- as_test_x=' +- eval sh -c '\'' +- if test -d "$1"; then +- test -d "$1/."; +- else +- case $1 in +- -*)set "./$1";; +- esac; +- case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in +- ???[sx]*):;;*)false;;esac;fi +- '\'' sh +- ' +-fi +-as_executable_p=$as_test_x ++# List of archive names. First name is the real one, the rest are links. ++# The last name is the one that the linker finds with -lNAME ++library_names_spec=$lt_library_names_spec ++ ++# The coded name of the library, if different from the real name. ++soname_spec=$lt_soname_spec + +-# Sed expression to map a string onto a valid CPP name. +-as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" ++# Command to use after installation of a shared archive. ++postinstall_cmds=$lt_postinstall_cmds + +-# Sed expression to map a string onto a valid variable name. +-as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" ++# Command to use after uninstallation of a shared archive. ++postuninstall_cmds=$lt_postuninstall_cmds + ++# Commands used to finish a libtool library installation in a directory. ++finish_cmds=$lt_finish_cmds + +-exec 6>&1 ++# As "finish_cmds", except a single script fragment to be evaled but ++# not shown. ++finish_eval=$lt_finish_eval + +-# Save the log message, to keep $[0] and so on meaningful, and to +-# report actual input values of CONFIG_FILES etc. instead of their +-# values after options handling. +-ac_log=" +-This file was extended by gnome-session $as_me 2.25.90, which was +-generated by GNU Autoconf 2.62. Invocation command line was ++# Whether we should hardcode library paths into libraries. ++hardcode_into_libs=$hardcode_into_libs + +- CONFIG_FILES = $CONFIG_FILES +- CONFIG_HEADERS = $CONFIG_HEADERS +- CONFIG_LINKS = $CONFIG_LINKS +- CONFIG_COMMANDS = $CONFIG_COMMANDS +- $ $0 $@ ++# Compile-time system search path for libraries. ++sys_lib_search_path_spec=$lt_sys_lib_search_path_spec + +-on `(hostname || uname -n) 2>/dev/null | sed 1q` +-" ++# Run-time system search path for libraries. ++sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec + +-_ACEOF ++# Whether dlopen is supported. ++dlopen_support=$enable_dlopen + +-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +-# Files that config.status was made for. +-config_files="$ac_config_files" +-config_headers="$ac_config_headers" +-config_commands="$ac_config_commands" ++# Whether dlopen of programs is supported. ++dlopen_self=$enable_dlopen_self + +-_ACEOF ++# Whether dlopen of statically linked programs is supported. ++dlopen_self_static=$enable_dlopen_self_static + +-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +-ac_cs_usage="\ +-\`$as_me' instantiates files from templates according to the +-current configuration. ++# Commands to strip libraries. ++old_striplib=$lt_old_striplib ++striplib=$lt_striplib + +-Usage: $0 [OPTIONS] [FILE]... + +- -h, --help print this help, then exit +- -V, --version print version number and configuration settings, then exit +- -q, --quiet do not print progress messages +- -d, --debug don't remove temporary files +- --recheck update $as_me by reconfiguring in the same conditions +- --file=FILE[:TEMPLATE] +- instantiate the configuration file FILE +- --header=FILE[:TEMPLATE] +- instantiate the configuration header FILE ++# The linker used to build libraries. ++LD=$lt_LD + +-Configuration files: +-$config_files ++# Commands used to build an old-style archive. ++old_archive_cmds=$lt_old_archive_cmds + +-Configuration headers: +-$config_headers ++# A language specific compiler. ++CC=$lt_compiler + +-Configuration commands: +-$config_commands ++# Is the compiler the GNU compiler? ++with_gcc=$GCC + +-Report bugs to ." ++# Compiler flag to turn off builtin functions. ++no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag + +-_ACEOF +-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +-ac_cs_version="\\ +-gnome-session config.status 2.25.90 +-configured by $0, generated by GNU Autoconf 2.62, +- with options \\"`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\" ++# How to pass a linker flag through the compiler. ++wl=$lt_lt_prog_compiler_wl + +-Copyright (C) 2008 Free Software Foundation, Inc. +-This config.status script is free software; the Free Software Foundation +-gives unlimited permission to copy, distribute and modify it." ++# Additional compiler flags for building library objects. ++pic_flag=$lt_lt_prog_compiler_pic + +-ac_pwd='$ac_pwd' +-srcdir='$srcdir' +-INSTALL='$INSTALL' +-MKDIR_P='$MKDIR_P' +-AWK='$AWK' +-test -n "\$AWK" || AWK=awk +-_ACEOF ++# Compiler flag to prevent dynamic linking. ++link_static_flag=$lt_lt_prog_compiler_static + +-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +-# The default lists apply if the user does not specify any file. +-ac_need_defaults=: +-while test $# != 0 +-do +- case $1 in +- --*=*) +- ac_option=`expr "X$1" : 'X\([^=]*\)='` +- ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` +- ac_shift=: +- ;; +- *) +- ac_option=$1 +- ac_optarg=$2 +- ac_shift=shift +- ;; +- esac ++# Does compiler simultaneously support -c and -o options? ++compiler_c_o=$lt_lt_cv_prog_compiler_c_o + +- case $ac_option in +- # Handling of the options. +- -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) +- ac_cs_recheck=: ;; +- --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) +- $as_echo "$ac_cs_version"; exit ;; +- --debug | --debu | --deb | --de | --d | -d ) +- debug=: ;; +- --file | --fil | --fi | --f ) +- $ac_shift +- case $ac_optarg in +- *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; +- esac +- CONFIG_FILES="$CONFIG_FILES '$ac_optarg'" +- ac_need_defaults=false;; +- --header | --heade | --head | --hea ) +- $ac_shift +- case $ac_optarg in +- *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; +- esac +- CONFIG_HEADERS="$CONFIG_HEADERS '$ac_optarg'" +- ac_need_defaults=false;; +- --he | --h) +- # Conflict between --help and --header +- { $as_echo "$as_me: error: ambiguous option: $1 +-Try \`$0 --help' for more information." >&2 +- { (exit 1); exit 1; }; };; +- --help | --hel | -h ) +- $as_echo "$ac_cs_usage"; exit ;; +- -q | -quiet | --quiet | --quie | --qui | --qu | --q \ +- | -silent | --silent | --silen | --sile | --sil | --si | --s) +- ac_cs_silent=: ;; ++# Whether or not to add -lc for building shared libraries. ++build_libtool_need_lc=$archive_cmds_need_lc + +- # This is an error. +- -*) { $as_echo "$as_me: error: unrecognized option: $1 +-Try \`$0 --help' for more information." >&2 +- { (exit 1); exit 1; }; } ;; ++# Whether or not to disallow shared libs when runtime libs are static. ++allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes + +- *) ac_config_targets="$ac_config_targets $1" +- ac_need_defaults=false ;; ++# Compiler flag to allow reflexive dlopens. ++export_dynamic_flag_spec=$lt_export_dynamic_flag_spec + +- esac +- shift +-done ++# Compiler flag to generate shared objects directly from archives. ++whole_archive_flag_spec=$lt_whole_archive_flag_spec + +-ac_configure_extra_args= ++# Whether the compiler copes with passing no objects directly. ++compiler_needs_object=$lt_compiler_needs_object + +-if $ac_cs_silent; then +- exec 6>/dev/null +- ac_configure_extra_args="$ac_configure_extra_args --silent" +-fi ++# Create an old-style archive from a shared archive. ++old_archive_from_new_cmds=$lt_old_archive_from_new_cmds + +-_ACEOF +-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +-if \$ac_cs_recheck; then +- set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion +- shift +- \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 +- CONFIG_SHELL='$SHELL' +- export CONFIG_SHELL +- exec "\$@" +-fi ++# Create a temporary old-style archive to link instead of a shared archive. ++old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds + +-_ACEOF +-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +-exec 5>>config.log +-{ +- echo +- sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX +-## Running $as_me. ## +-_ASBOX +- $as_echo "$ac_log" +-} >&5 ++# Commands used to build a shared archive. ++archive_cmds=$lt_archive_cmds ++archive_expsym_cmds=$lt_archive_expsym_cmds + +-_ACEOF +-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +-# +-# INIT-COMMANDS +-# +-AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" ++# Commands used to build a loadable module if different from building ++# a shared archive. ++module_cmds=$lt_module_cmds ++module_expsym_cmds=$lt_module_expsym_cmds + ++# Whether we are building with GNU ld or not. ++with_gnu_ld=$lt_with_gnu_ld + +-_ACEOF ++# Flag that allows shared libraries with undefined symbols to be built. ++allow_undefined_flag=$lt_allow_undefined_flag + +-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 ++# Flag that enforces no undefined symbols. ++no_undefined_flag=$lt_no_undefined_flag + +-# Handling of arguments. +-for ac_config_target in $ac_config_targets +-do +- case $ac_config_target in +- "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; +- "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; +- "default-1") CONFIG_COMMANDS="$CONFIG_COMMANDS default-1" ;; +- "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; +- "capplet/Makefile") CONFIG_FILES="$CONFIG_FILES capplet/Makefile" ;; +- "compat/Makefile") CONFIG_FILES="$CONFIG_FILES compat/Makefile" ;; +- "compat/at-spi-registryd-wrapper.desktop.in.in") CONFIG_FILES="$CONFIG_FILES compat/at-spi-registryd-wrapper.desktop.in.in" ;; +- "compat/gnome-settings-daemon-helper.desktop.in.in") CONFIG_FILES="$CONFIG_FILES compat/gnome-settings-daemon-helper.desktop.in.in" ;; +- "doc/Makefile") CONFIG_FILES="$CONFIG_FILES doc/Makefile" ;; +- "doc/dbus/Makefile") CONFIG_FILES="$CONFIG_FILES doc/dbus/Makefile" ;; +- "doc/dbus/gnome-session.xml") CONFIG_FILES="$CONFIG_FILES doc/dbus/gnome-session.xml" ;; +- "doc/man/Makefile") CONFIG_FILES="$CONFIG_FILES doc/man/Makefile" ;; +- "doc/man/gnome-session.1") CONFIG_FILES="$CONFIG_FILES doc/man/gnome-session.1" ;; +- "doc/man/default.session.5") CONFIG_FILES="$CONFIG_FILES doc/man/default.session.5" ;; +- "data/Makefile") CONFIG_FILES="$CONFIG_FILES data/Makefile" ;; +- "data/gnome-wm.desktop.in") CONFIG_FILES="$CONFIG_FILES data/gnome-wm.desktop.in" ;; +- "data/session-properties.desktop.in") CONFIG_FILES="$CONFIG_FILES data/session-properties.desktop.in" ;; +- "data/icons/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/Makefile" ;; +- "data/icons/16x16/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/16x16/Makefile" ;; +- "data/icons/22x22/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/22x22/Makefile" ;; +- "data/icons/24x24/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/24x24/Makefile" ;; +- "data/icons/32x32/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/32x32/Makefile" ;; +- "data/icons/48x48/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/48x48/Makefile" ;; +- "data/icons/scalable/Makefile") CONFIG_FILES="$CONFIG_FILES data/icons/scalable/Makefile" ;; +- "egg/Makefile") CONFIG_FILES="$CONFIG_FILES egg/Makefile" ;; +- "gnome-session/Makefile") CONFIG_FILES="$CONFIG_FILES gnome-session/Makefile" ;; +- "splash/Makefile") CONFIG_FILES="$CONFIG_FILES splash/Makefile" ;; +- "splash/gnome-session-splash.desktop.in.in") CONFIG_FILES="$CONFIG_FILES splash/gnome-session-splash.desktop.in.in" ;; +- "tools/Makefile") CONFIG_FILES="$CONFIG_FILES tools/Makefile" ;; +- "po/Makefile.in") CONFIG_FILES="$CONFIG_FILES po/Makefile.in" ;; +- "po/stamp-it") CONFIG_COMMANDS="$CONFIG_COMMANDS po/stamp-it" ;; ++# Flag to hardcode \$libdir into a binary during linking. ++# This must work even if \$libdir does not exist ++hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec + +- *) { { $as_echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 +-$as_echo "$as_me: error: invalid argument: $ac_config_target" >&2;} +- { (exit 1); exit 1; }; };; +- esac +-done ++# If ld is used when linking, flag to hardcode \$libdir into a binary ++# during linking. This must work even if \$libdir does not exist. ++hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld + ++# Whether we need a single "-rpath" flag with a separated argument. ++hardcode_libdir_separator=$lt_hardcode_libdir_separator + +-# If the user did not use the arguments to specify the items to instantiate, +-# then the envvar interface is used. Set only those that are not. +-# We use the long form for the default assignment because of an extremely +-# bizarre bug on SunOS 4.1.3. +-if $ac_need_defaults; then +- test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files +- test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers +- test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands +-fi ++# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes ++# DIR into the resulting binary. ++hardcode_direct=$hardcode_direct + +-# Have a temporary directory for convenience. Make it in the build tree +-# simply because there is no reason against having it here, and in addition, +-# creating and moving files from /tmp can sometimes cause problems. +-# Hook for its removal unless debugging. +-# Note that there is a small window in which the directory will not be cleaned: +-# after its creation but before its name has been assigned to `$tmp'. +-$debug || +-{ +- tmp= +- trap 'exit_status=$? +- { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status +-' 0 +- trap '{ (exit 1); exit 1; }' 1 2 13 15 +-} +-# Create a (secure) tmp directory for tmp files. ++# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes ++# DIR into the resulting binary and the resulting library dependency is ++# "absolute",i.e impossible to change by setting \${shlibpath_var} if the ++# library is relocated. ++hardcode_direct_absolute=$hardcode_direct_absolute + +-{ +- tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && +- test -n "$tmp" && test -d "$tmp" +-} || +-{ +- tmp=./conf$$-$RANDOM +- (umask 077 && mkdir "$tmp") +-} || +-{ +- $as_echo "$as_me: cannot create a temporary directory in ." >&2 +- { (exit 1); exit 1; } +-} ++# Set to "yes" if using the -LDIR flag during linking hardcodes DIR ++# into the resulting binary. ++hardcode_minus_L=$hardcode_minus_L ++ ++# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR ++# into the resulting binary. ++hardcode_shlibpath_var=$hardcode_shlibpath_var ++ ++# Set to "yes" if building a shared library automatically hardcodes DIR ++# into the library and all subsequent libraries and executables linked ++# against it. ++hardcode_automatic=$hardcode_automatic + +-# Set up the scripts for CONFIG_FILES section. +-# No need to generate them if there are no CONFIG_FILES. +-# This happens for instance with `./config.status config.h'. +-if test -n "$CONFIG_FILES"; then ++# Set to yes if linker adds runtime paths of dependent libraries ++# to runtime path list. ++inherit_rpath=$inherit_rpath + ++# Whether libtool must link a program against all its dependency libraries. ++link_all_deplibs=$link_all_deplibs + +-ac_cr=' ' +-ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` +-if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then +- ac_cs_awk_cr='\\r' +-else +- ac_cs_awk_cr=$ac_cr +-fi ++# Fix the shell variable \$srcfile for the compiler. ++fix_srcfile_path=$lt_fix_srcfile_path + +-echo 'BEGIN {' >"$tmp/subs1.awk" && +-_ACEOF ++# Set to "yes" if exported symbols are required. ++always_export_symbols=$always_export_symbols + ++# The commands to list exported symbols. ++export_symbols_cmds=$lt_export_symbols_cmds + +-{ +- echo "cat >conf$$subs.awk <<_ACEOF" && +- echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && +- echo "_ACEOF" +-} >conf$$subs.sh || +- { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 +-$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} +- { (exit 1); exit 1; }; } +-ac_delim_num=`echo "$ac_subst_vars" | grep -c '$'` +-ac_delim='%!_!# ' +-for ac_last_try in false false false false false :; do +- . ./conf$$subs.sh || +- { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 +-$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} +- { (exit 1); exit 1; }; } ++# Symbols that should not be listed in the preloaded symbols. ++exclude_expsyms=$lt_exclude_expsyms + +- if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` = $ac_delim_num; then +- break +- elif $ac_last_try; then +- { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 +-$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} +- { (exit 1); exit 1; }; } +- else +- ac_delim="$ac_delim!$ac_delim _$ac_delim!! " +- fi +-done +-rm -f conf$$subs.sh ++# Symbols that must always be exported. ++include_expsyms=$lt_include_expsyms + +-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +-cat >>"\$tmp/subs1.awk" <<\\_ACAWK && +-_ACEOF +-sed -n ' +-h +-s/^/S["/; s/!.*/"]=/ +-p +-g +-s/^[^!]*!// +-:repl +-t repl +-s/'"$ac_delim"'$// +-t delim +-:nl +-h +-s/\(.\{148\}\).*/\1/ +-t more1 +-s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ +-p +-n +-b repl +-:more1 +-s/["\\]/\\&/g; s/^/"/; s/$/"\\/ +-p +-g +-s/.\{148\}// +-t nl +-:delim +-h +-s/\(.\{148\}\).*/\1/ +-t more2 +-s/["\\]/\\&/g; s/^/"/; s/$/"/ +-p +-b +-:more2 +-s/["\\]/\\&/g; s/^/"/; s/$/"\\/ +-p +-g +-s/.\{148\}// +-t delim +-' >$CONFIG_STATUS || ac_write_fail=1 +-rm -f conf$$subs.awk +-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +-_ACAWK +-cat >>"\$tmp/subs1.awk" <<_ACAWK && +- for (key in S) S_is_set[key] = 1 +- FS = "" ++# Commands necessary for linking programs (against libraries) with templates. ++prelink_cmds=$lt_prelink_cmds + +-} +-{ +- line = $ 0 +- nfields = split(line, field, "@") +- substed = 0 +- len = length(field[1]) +- for (i = 2; i < nfields; i++) { +- key = field[i] +- keylen = length(key) +- if (S_is_set[key]) { +- value = S[key] +- line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) +- len += length(value) + length(field[++i]) +- substed = 1 +- } else +- len += 1 + keylen +- } ++# Specify filename containing input files. ++file_list_spec=$lt_file_list_spec + +- print line +-} ++# How to hardcode a shared library path into an executable. ++hardcode_action=$hardcode_action + +-_ACAWK +-_ACEOF +-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +-if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then +- sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" +-else +- cat +-fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \ +- || { { $as_echo "$as_me:$LINENO: error: could not setup config files machinery" >&5 +-$as_echo "$as_me: error: could not setup config files machinery" >&2;} +- { (exit 1); exit 1; }; } +-_ACEOF ++# ### END LIBTOOL CONFIG + +-# VPATH may cause trouble with some makes, so we remove $(srcdir), +-# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and +-# trailing colons and then remove the whole line if VPATH becomes empty +-# (actually we leave an empty line to preserve line numbers). +-if test "x$srcdir" = x.; then +- ac_vpsub='/^[ ]*VPATH[ ]*=/{ +-s/:*\$(srcdir):*/:/ +-s/:*\${srcdir}:*/:/ +-s/:*@srcdir@:*/:/ +-s/^\([^=]*=[ ]*\):*/\1/ +-s/:*$// +-s/^[^=]*=[ ]*$// +-}' ++_LT_EOF ++ ++ case $host_os in ++ aix3*) ++ cat <<\_LT_EOF >> "$cfgfile" ++# AIX sometimes has problems with the GCC collect2 program. For some ++# reason, if we set the COLLECT_NAMES environment variable, the problems ++# vanish in a puff of smoke. ++if test "X${COLLECT_NAMES+set}" != Xset; then ++ COLLECT_NAMES= ++ export COLLECT_NAMES + fi ++_LT_EOF ++ ;; ++ esac + +-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +-fi # test -n "$CONFIG_FILES" + +-# Set up the scripts for CONFIG_HEADERS section. +-# No need to generate them if there are no CONFIG_HEADERS. +-# This happens for instance with `./config.status Makefile'. +-if test -n "$CONFIG_HEADERS"; then +-cat >"$tmp/defines.awk" <<\_ACAWK || +-BEGIN { +-_ACEOF ++ltmain="$ac_aux_dir/ltmain.sh" + +-# Transform confdefs.h into an awk script `defines.awk', embedded as +-# here-document in config.status, that substitutes the proper values into +-# config.h.in to produce config.h. + +-# Create a delimiter string that does not exist in confdefs.h, to ease +-# handling of long lines. +-ac_delim='%!_!# ' +-for ac_last_try in false false :; do +- ac_t=`sed -n "/$ac_delim/p" confdefs.h` +- if test -z "$ac_t"; then +- break +- elif $ac_last_try; then +- { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_HEADERS" >&5 +-$as_echo "$as_me: error: could not make $CONFIG_HEADERS" >&2;} +- { (exit 1); exit 1; }; } +- else +- ac_delim="$ac_delim!$ac_delim _$ac_delim!! " +- fi +-done ++ # We use sed instead of cat because bash on DJGPP gets confused if ++ # if finds mixed CR/LF and LF-only lines. Since sed operates in ++ # text mode, it properly converts lines to CR/LF. This bash problem ++ # is reportedly fixed, but why not run on old versions too? ++ sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \ ++ || (rm -f "$cfgfile"; exit 1) + +-# For the awk script, D is an array of macro values keyed by name, +-# likewise P contains macro parameters if any. Preserve backslash +-# newline sequences. ++ case $xsi_shell in ++ yes) ++ cat << \_LT_EOF >> "$cfgfile" + +-ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* +-sed -n ' +-s/.\{148\}/&'"$ac_delim"'/g +-t rset +-:rset +-s/^[ ]*#[ ]*define[ ][ ]*/ / +-t def +-d +-:def +-s/\\$// +-t bsnl +-s/["\\]/\\&/g +-s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ +-D["\1"]=" \3"/p +-s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p +-d +-:bsnl +-s/["\\]/\\&/g +-s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ +-D["\1"]=" \3\\\\\\n"\\/p +-t cont +-s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p +-t cont +-d +-:cont +-n +-s/.\{148\}/&'"$ac_delim"'/g +-t clear +-:clear +-s/\\$// +-t bsnlc +-s/["\\]/\\&/g; s/^/"/; s/$/"/p +-d +-:bsnlc +-s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p +-b cont +-' >$CONFIG_STATUS || ac_write_fail=1 +- +-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +- for (key in D) D_is_set[key] = 1 +- FS = "" +-} +-/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ { +- line = \$ 0 +- split(line, arg, " ") +- if (arg[1] == "#") { +- defundef = arg[2] +- mac1 = arg[3] +- } else { +- defundef = substr(arg[1], 2) +- mac1 = arg[2] +- } +- split(mac1, mac2, "(") #) +- macro = mac2[1] +- if (D_is_set[macro]) { +- # Preserve the white space surrounding the "#". +- prefix = substr(line, 1, index(line, defundef) - 1) +- print prefix "define", macro P[macro] D[macro] +- next +- } else { +- # Replace #undef with comments. This is necessary, for example, +- # in the case of _POSIX_SOURCE, which is predefined and required +- # on some systems where configure will not decide to define it. +- if (defundef == "undef") { +- print "/*", line, "*/" +- next +- } +- } ++# func_dirname file append nondir_replacement ++# Compute the dirname of FILE. If nonempty, add APPEND to the result, ++# otherwise set result to NONDIR_REPLACEMENT. ++func_dirname () ++{ ++ case ${1} in ++ */*) func_dirname_result="${1%/*}${2}" ;; ++ * ) func_dirname_result="${3}" ;; ++ esac + } +-{ print } +-_ACAWK +-_ACEOF +-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +- { { $as_echo "$as_me:$LINENO: error: could not setup config headers machinery" >&5 +-$as_echo "$as_me: error: could not setup config headers machinery" >&2;} +- { (exit 1); exit 1; }; } +-fi # test -n "$CONFIG_HEADERS" + ++# func_basename file ++func_basename () ++{ ++ func_basename_result="${1##*/}" ++} + +-eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS" +-shift +-for ac_tag +-do +- case $ac_tag in +- :[FHLC]) ac_mode=$ac_tag; continue;; ++# func_dirname_and_basename file append nondir_replacement ++# perform func_basename and func_dirname in a single function ++# call: ++# dirname: Compute the dirname of FILE. If nonempty, ++# add APPEND to the result, otherwise set result ++# to NONDIR_REPLACEMENT. ++# value returned in "$func_dirname_result" ++# basename: Compute filename of FILE. ++# value retuned in "$func_basename_result" ++# Implementation must be kept synchronized with func_dirname ++# and func_basename. For efficiency, we do not delegate to ++# those functions but instead duplicate the functionality here. ++func_dirname_and_basename () ++{ ++ case ${1} in ++ */*) func_dirname_result="${1%/*}${2}" ;; ++ * ) func_dirname_result="${3}" ;; + esac +- case $ac_mode$ac_tag in +- :[FHL]*:*);; +- :L* | :C*:*) { { $as_echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5 +-$as_echo "$as_me: error: Invalid tag $ac_tag." >&2;} +- { (exit 1); exit 1; }; };; +- :[FH]-) ac_tag=-:-;; +- :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; ++ func_basename_result="${1##*/}" ++} ++ ++# func_stripname prefix suffix name ++# strip PREFIX and SUFFIX off of NAME. ++# PREFIX and SUFFIX must not contain globbing or regex special ++# characters, hashes, percent signs, but SUFFIX may contain a leading ++# dot (in which case that matches only a dot). ++func_stripname () ++{ ++ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are ++ # positional parameters, so assign one to ordinary parameter first. ++ func_stripname_result=${3} ++ func_stripname_result=${func_stripname_result#"${1}"} ++ func_stripname_result=${func_stripname_result%"${2}"} ++} ++ ++# func_opt_split ++func_opt_split () ++{ ++ func_opt_split_opt=${1%%=*} ++ func_opt_split_arg=${1#*=} ++} ++ ++# func_lo2o object ++func_lo2o () ++{ ++ case ${1} in ++ *.lo) func_lo2o_result=${1%.lo}.${objext} ;; ++ *) func_lo2o_result=${1} ;; + esac +- ac_save_IFS=$IFS +- IFS=: +- set x $ac_tag +- IFS=$ac_save_IFS +- shift +- ac_file=$1 +- shift ++} + +- case $ac_mode in +- :L) ac_source=$1;; +- :[FH]) +- ac_file_inputs= +- for ac_f +- do +- case $ac_f in +- -) ac_f="$tmp/stdin";; +- *) # Look for the file first in the build tree, then in the source tree +- # (if the path is not absolute). The absolute path cannot be DOS-style, +- # because $ac_f cannot contain `:'. +- test -f "$ac_f" || +- case $ac_f in +- [\\/$]*) false;; +- *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; +- esac || +- { { $as_echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5 +-$as_echo "$as_me: error: cannot find input file: $ac_f" >&2;} +- { (exit 1); exit 1; }; };; +- esac +- case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac +- ac_file_inputs="$ac_file_inputs '$ac_f'" +- done ++# func_xform libobj-or-source ++func_xform () ++{ ++ func_xform_result=${1%.*}.lo ++} + +- # Let's still pretend it is `configure' which instantiates (i.e., don't +- # use $as_me), people would be surprised to read: +- # /* config.h. Generated by config.status. */ +- configure_input='Generated from '` +- $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' +- `' by configure.' +- if test x"$ac_file" != x-; then +- configure_input="$ac_file. $configure_input" +- { $as_echo "$as_me:$LINENO: creating $ac_file" >&5 +-$as_echo "$as_me: creating $ac_file" >&6;} +- fi +- # Neutralize special characters interpreted by sed in replacement strings. +- case $configure_input in #( +- *\&* | *\|* | *\\* ) +- ac_sed_conf_input=`$as_echo "$configure_input" | +- sed 's/[\\\\&|]/\\\\&/g'`;; #( +- *) ac_sed_conf_input=$configure_input;; +- esac ++# func_arith arithmetic-term... ++func_arith () ++{ ++ func_arith_result=$(( $* )) ++} + +- case $ac_tag in +- *:-:* | *:-) cat >"$tmp/stdin" \ +- || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 +-$as_echo "$as_me: error: could not create $ac_file" >&2;} +- { (exit 1); exit 1; }; } ;; +- esac ++# func_len string ++# STRING may not start with a hyphen. ++func_len () ++{ ++ func_len_result=${#1} ++} ++ ++_LT_EOF + ;; +- esac ++ *) # Bourne compatible functions. ++ cat << \_LT_EOF >> "$cfgfile" + +- ac_dir=`$as_dirname -- "$ac_file" || +-$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ +- X"$ac_file" : 'X\(//\)[^/]' \| \ +- X"$ac_file" : 'X\(//\)$' \| \ +- X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || +-$as_echo X"$ac_file" | +- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ +- s//\1/ +- q +- } +- /^X\(\/\/\)[^/].*/{ +- s//\1/ +- q +- } +- /^X\(\/\/\)$/{ +- s//\1/ +- q +- } +- /^X\(\/\).*/{ +- s//\1/ +- q +- } +- s/.*/./; q'` +- { as_dir="$ac_dir" +- case $as_dir in #( +- -*) as_dir=./$as_dir;; +- esac +- test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { +- as_dirs= +- while :; do +- case $as_dir in #( +- *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( +- *) as_qdir=$as_dir;; +- esac +- as_dirs="'$as_qdir' $as_dirs" +- as_dir=`$as_dirname -- "$as_dir" || +-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ +- X"$as_dir" : 'X\(//\)[^/]' \| \ +- X"$as_dir" : 'X\(//\)$' \| \ +- X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +-$as_echo X"$as_dir" | +- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ +- s//\1/ +- q +- } +- /^X\(\/\/\)[^/].*/{ +- s//\1/ +- q +- } +- /^X\(\/\/\)$/{ +- s//\1/ +- q +- } +- /^X\(\/\).*/{ +- s//\1/ +- q +- } +- s/.*/./; q'` +- test -d "$as_dir" && break +- done +- test -z "$as_dirs" || eval "mkdir $as_dirs" +- } || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 +-$as_echo "$as_me: error: cannot create directory $as_dir" >&2;} +- { (exit 1); exit 1; }; }; } +- ac_builddir=. ++# func_dirname file append nondir_replacement ++# Compute the dirname of FILE. If nonempty, add APPEND to the result, ++# otherwise set result to NONDIR_REPLACEMENT. ++func_dirname () ++{ ++ # Extract subdirectory from the argument. ++ func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"` ++ if test "X$func_dirname_result" = "X${1}"; then ++ func_dirname_result="${3}" ++ else ++ func_dirname_result="$func_dirname_result${2}" ++ fi ++} + +-case "$ac_dir" in +-.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; +-*) +- ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` +- # A ".." for each directory in $ac_dir_suffix. +- ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` +- case $ac_top_builddir_sub in +- "") ac_top_builddir_sub=. ac_top_build_prefix= ;; +- *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; +- esac ;; +-esac +-ac_abs_top_builddir=$ac_pwd +-ac_abs_builddir=$ac_pwd$ac_dir_suffix +-# for backward compatibility: +-ac_top_builddir=$ac_top_build_prefix ++# func_basename file ++func_basename () ++{ ++ func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"` ++} + +-case $srcdir in +- .) # We are building in place. +- ac_srcdir=. +- ac_top_srcdir=$ac_top_builddir_sub +- ac_abs_top_srcdir=$ac_pwd ;; +- [\\/]* | ?:[\\/]* ) # Absolute name. +- ac_srcdir=$srcdir$ac_dir_suffix; +- ac_top_srcdir=$srcdir +- ac_abs_top_srcdir=$srcdir ;; +- *) # Relative name. +- ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix +- ac_top_srcdir=$ac_top_build_prefix$srcdir +- ac_abs_top_srcdir=$ac_pwd/$srcdir ;; +-esac +-ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix + ++# func_stripname prefix suffix name ++# strip PREFIX and SUFFIX off of NAME. ++# PREFIX and SUFFIX must not contain globbing or regex special ++# characters, hashes, percent signs, but SUFFIX may contain a leading ++# dot (in which case that matches only a dot). ++# func_strip_suffix prefix name ++func_stripname () ++{ ++ case ${2} in ++ .*) func_stripname_result=`$ECHO "X${3}" \ ++ | $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;; ++ *) func_stripname_result=`$ECHO "X${3}" \ ++ | $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;; ++ esac ++} ++ ++# sed scripts: ++my_sed_long_opt='1s/^\(-[^=]*\)=.*/\1/;q' ++my_sed_long_arg='1s/^-[^=]*=//' ++ ++# func_opt_split ++func_opt_split () ++{ ++ func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"` ++ func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"` ++} + +- case $ac_mode in +- :F) +- # +- # CONFIG_FILE +- # ++# func_lo2o object ++func_lo2o () ++{ ++ func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"` ++} + +- case $INSTALL in +- [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; +- *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; +- esac +- ac_MKDIR_P=$MKDIR_P +- case $MKDIR_P in +- [\\/$]* | ?:[\\/]* ) ;; +- */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;; +- esac +-_ACEOF ++# func_xform libobj-or-source ++func_xform () ++{ ++ func_xform_result=`$ECHO "X${1}" | $Xsed -e 's/\.[^.]*$/.lo/'` ++} + +-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +-# If the template does not know about datarootdir, expand it. +-# FIXME: This hack should be removed a few years after 2.60. +-ac_datarootdir_hack=; ac_datarootdir_seen= ++# func_arith arithmetic-term... ++func_arith () ++{ ++ func_arith_result=`expr "$@"` ++} + +-ac_sed_dataroot=' +-/datarootdir/ { +- p +- q ++# func_len string ++# STRING may not start with a hyphen. ++func_len () ++{ ++ func_len_result=`expr "$1" : ".*" 2>/dev/null || echo $max_cmd_len` + } +-/@datadir@/p +-/@docdir@/p +-/@infodir@/p +-/@localedir@/p +-/@mandir@/p +-' +-case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in +-*datarootdir*) ac_datarootdir_seen=yes;; +-*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) +- { $as_echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 +-$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} +-_ACEOF +-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +- ac_datarootdir_hack=' +- s&@datadir@&$datadir&g +- s&@docdir@&$docdir&g +- s&@infodir@&$infodir&g +- s&@localedir@&$localedir&g +- s&@mandir@&$mandir&g +- s&\\\${datarootdir}&$datarootdir&g' ;; ++ ++_LT_EOF + esac +-_ACEOF + +-# Neutralize VPATH when `$srcdir' = `.'. +-# Shell code in configure.ac might set extrasub. +-# FIXME: do we really want to maintain this feature? +-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +-ac_sed_extra="$ac_vpsub +-$extrasub +-_ACEOF +-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +-:t +-/@[a-zA-Z_][a-zA-Z_0-9]*@/!b +-s|@configure_input@|$ac_sed_conf_input|;t t +-s&@top_builddir@&$ac_top_builddir_sub&;t t +-s&@top_build_prefix@&$ac_top_build_prefix&;t t +-s&@srcdir@&$ac_srcdir&;t t +-s&@abs_srcdir@&$ac_abs_srcdir&;t t +-s&@top_srcdir@&$ac_top_srcdir&;t t +-s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t +-s&@builddir@&$ac_builddir&;t t +-s&@abs_builddir@&$ac_abs_builddir&;t t +-s&@abs_top_builddir@&$ac_abs_top_builddir&;t t +-s&@INSTALL@&$ac_INSTALL&;t t +-s&@MKDIR_P@&$ac_MKDIR_P&;t t +-$ac_datarootdir_hack +-" +-eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" >$tmp/out \ +- || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 +-$as_echo "$as_me: error: could not create $ac_file" >&2;} +- { (exit 1); exit 1; }; } ++case $lt_shell_append in ++ yes) ++ cat << \_LT_EOF >> "$cfgfile" ++ ++# func_append var value ++# Append VALUE to the end of shell variable VAR. ++func_append () ++{ ++ eval "$1+=\$2" ++} ++_LT_EOF ++ ;; ++ *) ++ cat << \_LT_EOF >> "$cfgfile" + +-test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && +- { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } && +- { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } && +- { $as_echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir' +-which seems to be undefined. Please make sure it is defined." >&5 +-$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' +-which seems to be undefined. Please make sure it is defined." >&2;} ++# func_append var value ++# Append VALUE to the end of shell variable VAR. ++func_append () ++{ ++ eval "$1=\$$1\$2" ++} + +- rm -f "$tmp/stdin" +- case $ac_file in +- -) cat "$tmp/out" && rm -f "$tmp/out";; +- *) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";; +- esac \ +- || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 +-$as_echo "$as_me: error: could not create $ac_file" >&2;} +- { (exit 1); exit 1; }; } +- ;; +- :H) +- # +- # CONFIG_HEADER +- # +- if test x"$ac_file" != x-; then +- { +- $as_echo "/* $configure_input */" \ +- && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" +- } >"$tmp/config.h" \ +- || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 +-$as_echo "$as_me: error: could not create $ac_file" >&2;} +- { (exit 1); exit 1; }; } +- if diff "$ac_file" "$tmp/config.h" >/dev/null 2>&1; then +- { $as_echo "$as_me:$LINENO: $ac_file is unchanged" >&5 +-$as_echo "$as_me: $ac_file is unchanged" >&6;} +- else +- rm -f "$ac_file" +- mv "$tmp/config.h" "$ac_file" \ +- || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 +-$as_echo "$as_me: error: could not create $ac_file" >&2;} +- { (exit 1); exit 1; }; } +- fi +- else +- $as_echo "/* $configure_input */" \ +- && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" \ +- || { { $as_echo "$as_me:$LINENO: error: could not create -" >&5 +-$as_echo "$as_me: error: could not create -" >&2;} +- { (exit 1); exit 1; }; } +- fi +-# Compute "$ac_file"'s index in $config_headers. +-_am_arg="$ac_file" +-_am_stamp_count=1 +-for _am_header in $config_headers :; do +- case $_am_header in +- $_am_arg | $_am_arg:* ) +- break ;; +- * ) +- _am_stamp_count=`expr $_am_stamp_count + 1` ;; ++_LT_EOF ++ ;; + esac +-done +-echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" || +-$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ +- X"$_am_arg" : 'X\(//\)[^/]' \| \ +- X"$_am_arg" : 'X\(//\)$' \| \ +- X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null || +-$as_echo X"$_am_arg" | +- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ +- s//\1/ +- q +- } +- /^X\(\/\/\)[^/].*/{ +- s//\1/ +- q +- } +- /^X\(\/\/\)$/{ +- s//\1/ +- q +- } +- /^X\(\/\).*/{ +- s//\1/ +- q +- } +- s/.*/./; q'`/stamp-h$_am_stamp_count +- ;; + +- :C) { $as_echo "$as_me:$LINENO: executing $ac_file commands" >&5 +-$as_echo "$as_me: executing $ac_file commands" >&6;} +- ;; +- esac + ++ sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \ ++ || (rm -f "$cfgfile"; exit 1) ++ ++ mv -f "$cfgfile" "$ofile" || ++ (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") ++ chmod +x "$ofile" + +- case $ac_file$ac_mode in +- "depfiles":C) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do +- # Strip MF so we end up with the name of the file. +- mf=`echo "$mf" | sed -e 's/:.*$//'` +- # Check whether this is an Automake generated Makefile or not. +- # We used to match only the files named `Makefile.in', but +- # some people rename them; so instead we look at the file content. +- # Grep'ing the first line is not enough: some people post-process +- # each Makefile.in and add a new line on top of each file to say so. +- # Grep'ing the whole file is not good either: AIX grep has a line +- # limit of 2048, but all sed's we know have understand at least 4000. +- if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then +- dirpart=`$as_dirname -- "$mf" || +-$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ +- X"$mf" : 'X\(//\)[^/]' \| \ +- X"$mf" : 'X\(//\)$' \| \ +- X"$mf" : 'X\(/\)' \| . 2>/dev/null || +-$as_echo X"$mf" | +- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ +- s//\1/ +- q +- } +- /^X\(\/\/\)[^/].*/{ +- s//\1/ +- q +- } +- /^X\(\/\/\)$/{ +- s//\1/ +- q +- } +- /^X\(\/\).*/{ +- s//\1/ +- q +- } +- s/.*/./; q'` +- else +- continue +- fi +- # Extract the definition of DEPDIR, am__include, and am__quote +- # from the Makefile without running `make'. +- DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` +- test -z "$DEPDIR" && continue +- am__include=`sed -n 's/^am__include = //p' < "$mf"` +- test -z "am__include" && continue +- am__quote=`sed -n 's/^am__quote = //p' < "$mf"` +- # When using ansi2knr, U may be empty or an underscore; expand it +- U=`sed -n 's/^U = //p' < "$mf"` +- # Find all dependency output files, they are included files with +- # $(DEPDIR) in their names. We invoke sed twice because it is the +- # simplest approach to changing $(DEPDIR) to its actual value in the +- # expansion. +- for file in `sed -n " +- s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ +- sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do +- # Make sure the directory exists. +- test -f "$dirpart/$file" && continue +- fdir=`$as_dirname -- "$file" || +-$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ +- X"$file" : 'X\(//\)[^/]' \| \ +- X"$file" : 'X\(//\)$' \| \ +- X"$file" : 'X\(/\)' \| . 2>/dev/null || +-$as_echo X"$file" | +- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ +- s//\1/ +- q +- } +- /^X\(\/\/\)[^/].*/{ +- s//\1/ +- q +- } +- /^X\(\/\/\)$/{ +- s//\1/ +- q +- } +- /^X\(\/\).*/{ +- s//\1/ +- q +- } +- s/.*/./; q'` +- { as_dir=$dirpart/$fdir +- case $as_dir in #( +- -*) as_dir=./$as_dir;; +- esac +- test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { +- as_dirs= +- while :; do +- case $as_dir in #( +- *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( +- *) as_qdir=$as_dir;; +- esac +- as_dirs="'$as_qdir' $as_dirs" +- as_dir=`$as_dirname -- "$as_dir" || +-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ +- X"$as_dir" : 'X\(//\)[^/]' \| \ +- X"$as_dir" : 'X\(//\)$' \| \ +- X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +-$as_echo X"$as_dir" | +- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ +- s//\1/ +- q +- } +- /^X\(\/\/\)[^/].*/{ +- s//\1/ +- q +- } +- /^X\(\/\/\)$/{ +- s//\1/ +- q +- } +- /^X\(\/\).*/{ +- s//\1/ +- q +- } +- s/.*/./; q'` +- test -d "$as_dir" && break +- done +- test -z "$as_dirs" || eval "mkdir $as_dirs" +- } || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 +-$as_echo "$as_me: error: cannot create directory $as_dir" >&2;} +- { (exit 1); exit 1; }; }; } +- # echo "creating $dirpart/$file" +- echo '# dummy' > "$dirpart/$file" +- done +-done + ;; + "default-1":C) case "$CONFIG_FILES" in *po/Makefile.in*) + sed -e "/POTFILES =/r po/POTFILES" po/Makefile.in > po/Makefile + esac ;; + "po/stamp-it":C) +- if ! grep "^# INTLTOOL_MAKEFILE$" "po/Makefile.in" > /dev/null ; then +- { { $as_echo "$as_me:$LINENO: error: po/Makefile.in.in was not created by intltoolize." >&5 +-$as_echo "$as_me: error: po/Makefile.in.in was not created by intltoolize." >&2;} ++ if ! grep "^# INTLTOOL_MAKEFILE$" "po/Makefile.in" ; then ++ { { echo "$as_me:$LINENO: error: po/Makefile.in.in was not created by intltoolize." >&5 ++echo "$as_me: error: po/Makefile.in.in was not created by intltoolize." >&2;} + { (exit 1); exit 1; }; } + fi + rm -f "po/stamp-it" "po/stamp-it.tmp" "po/POTFILES" "po/Makefile.tmp" +@@ -29204,11 +20827,6 @@ + chmod +x $CONFIG_STATUS + ac_clean_files=$ac_clean_files_save + +-test $ac_write_fail = 0 || +- { { $as_echo "$as_me:$LINENO: error: write failure creating $CONFIG_STATUS" >&5 +-$as_echo "$as_me: error: write failure creating $CONFIG_STATUS" >&2;} +- { (exit 1); exit 1; }; } +- + + # configure is writing to config.log, and then calls config.status. + # config.status does its own redirection, appending to config.log. +@@ -29230,10 +20848,6 @@ + # would make configure fail if this is the last instruction. + $ac_cs_success || { (exit 1); exit 1; } + fi +-if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then +- { $as_echo "$as_me:$LINENO: WARNING: Unrecognized options: $ac_unrecognized_opts" >&5 +-$as_echo "$as_me: WARNING: Unrecognized options: $ac_unrecognized_opts" >&2;} +-fi + + + +Index: gnome-session-2.25.90/data/Makefile.in +=================================================================== +--- gnome-session-2.25.90.orig/data/Makefile.in 2009-02-04 18:27:42.000000000 +0000 ++++ gnome-session-2.25.90/data/Makefile.in 2009-02-04 18:29:59.000000000 +0000 +@@ -44,9 +44,10 @@ + mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs + CONFIG_HEADER = $(top_builddir)/config.h + CONFIG_CLEAN_FILES = gnome-wm.desktop.in session-properties.desktop.in +-am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(gladedir)" \ +- "$(DESTDIR)$(pixmapdir)" "$(DESTDIR)$(schemasdir)" \ +- "$(DESTDIR)$(settingsdir)" "$(DESTDIR)$(xsessiondir)" ++am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(appsdir)" \ ++ "$(DESTDIR)$(gladedir)" "$(DESTDIR)$(pixmapdir)" \ ++ "$(DESTDIR)$(schemasdir)" "$(DESTDIR)$(settingsdir)" \ ++ "$(DESTDIR)$(xsessiondir)" + binSCRIPT_INSTALL = $(INSTALL_SCRIPT) + SCRIPTS = $(bin_SCRIPTS) + SOURCES = +@@ -64,13 +65,14 @@ + *) f=$$p;; \ + esac; + am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; ++appsDATA_INSTALL = $(INSTALL_DATA) + gladeDATA_INSTALL = $(INSTALL_DATA) + pixmapDATA_INSTALL = $(INSTALL_DATA) + schemasDATA_INSTALL = $(INSTALL_DATA) + settingsDATA_INSTALL = $(INSTALL_DATA) + xsessionDATA_INSTALL = $(INSTALL_DATA) +-DATA = $(glade_DATA) $(pixmap_DATA) $(schemas_DATA) $(settings_DATA) \ +- $(xsession_DATA) ++DATA = $(apps_DATA) $(glade_DATA) $(pixmap_DATA) $(schemas_DATA) \ ++ $(settings_DATA) $(xsession_DATA) + RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ + distclean-recursive maintainer-clean-recursive + ETAGS = etags +@@ -96,10 +98,6 @@ + COMPAT_LIBS = @COMPAT_LIBS@ + CPP = @CPP@ + CPPFLAGS = @CPPFLAGS@ +-CXX = @CXX@ +-CXXCPP = @CXXCPP@ +-CXXDEPMODE = @CXXDEPMODE@ +-CXXFLAGS = @CXXFLAGS@ + CYGPATH_W = @CYGPATH_W@ + DATADIRNAME = @DATADIRNAME@ + DBUS_GLIB_CFLAGS = @DBUS_GLIB_CFLAGS@ +@@ -109,7 +107,7 @@ + DISABLE_DEPRECATED = @DISABLE_DEPRECATED@ + DISABLE_DEPRECATED_CFLAGS = @DISABLE_DEPRECATED_CFLAGS@ + DSYMUTIL = @DSYMUTIL@ +-ECHO = @ECHO@ ++DUMPBIN = @DUMPBIN@ + ECHO_C = @ECHO_C@ + ECHO_N = @ECHO_N@ + ECHO_T = @ECHO_T@ +@@ -117,8 +115,7 @@ + EGG_SMCLIENT_LIBS = @EGG_SMCLIENT_LIBS@ + EGREP = @EGREP@ + EXEEXT = @EXEEXT@ +-F77 = @F77@ +-FFLAGS = @FFLAGS@ ++FGREP = @FGREP@ + GCONFTOOL = @GCONFTOOL@ + GCONF_CFLAGS = @GCONF_CFLAGS@ + GCONF_LIBS = @GCONF_LIBS@ +@@ -143,14 +140,35 @@ + INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ + INSTOBJEXT = @INSTOBJEXT@ + INTLLIBS = @INTLLIBS@ ++INTLTOOL_CAVES_RULE = @INTLTOOL_CAVES_RULE@ ++INTLTOOL_DESKTOP_RULE = @INTLTOOL_DESKTOP_RULE@ ++INTLTOOL_DIRECTORY_RULE = @INTLTOOL_DIRECTORY_RULE@ + INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ ++INTLTOOL_KBD_RULE = @INTLTOOL_KBD_RULE@ ++INTLTOOL_KEYS_RULE = @INTLTOOL_KEYS_RULE@ + INTLTOOL_MERGE = @INTLTOOL_MERGE@ ++INTLTOOL_OAF_RULE = @INTLTOOL_OAF_RULE@ + INTLTOOL_PERL = @INTLTOOL_PERL@ ++INTLTOOL_POLICY_RULE = @INTLTOOL_POLICY_RULE@ ++INTLTOOL_PONG_RULE = @INTLTOOL_PONG_RULE@ ++INTLTOOL_PROP_RULE = @INTLTOOL_PROP_RULE@ ++INTLTOOL_SCHEMAS_RULE = @INTLTOOL_SCHEMAS_RULE@ ++INTLTOOL_SERVER_RULE = @INTLTOOL_SERVER_RULE@ ++INTLTOOL_SERVICE_RULE = @INTLTOOL_SERVICE_RULE@ ++INTLTOOL_SHEET_RULE = @INTLTOOL_SHEET_RULE@ ++INTLTOOL_SOUNDLIST_RULE = @INTLTOOL_SOUNDLIST_RULE@ ++INTLTOOL_THEME_RULE = @INTLTOOL_THEME_RULE@ ++INTLTOOL_UI_RULE = @INTLTOOL_UI_RULE@ + INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ ++INTLTOOL_XAM_RULE = @INTLTOOL_XAM_RULE@ ++INTLTOOL_XML_NOMERGE_RULE = @INTLTOOL_XML_NOMERGE_RULE@ ++INTLTOOL_XML_RULE = @INTLTOOL_XML_RULE@ ++LD = @LD@ + LDFLAGS = @LDFLAGS@ + LIBOBJS = @LIBOBJS@ + LIBS = @LIBS@ + LIBTOOL = @LIBTOOL@ ++LIPO = @LIPO@ + LN_S = @LN_S@ + LTLIBOBJS = @LTLIBOBJS@ + MAINT = @MAINT@ +@@ -160,8 +178,11 @@ + MSGFMT = @MSGFMT@ + MSGFMT_OPTS = @MSGFMT_OPTS@ + MSGMERGE = @MSGMERGE@ ++NM = @NM@ + NMEDIT = @NMEDIT@ + OBJEXT = @OBJEXT@ ++OTOOL = @OTOOL@ ++OTOOL64 = @OTOOL64@ + PACKAGE = @PACKAGE@ + PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ + PACKAGE_NAME = @PACKAGE_NAME@ +@@ -209,8 +230,7 @@ + abs_top_builddir = @abs_top_builddir@ + abs_top_srcdir = @abs_top_srcdir@ + ac_ct_CC = @ac_ct_CC@ +-ac_ct_CXX = @ac_ct_CXX@ +-ac_ct_F77 = @ac_ct_F77@ ++ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ + am__include = @am__include@ + am__leading_dot = @am__leading_dot@ + am__quote = @am__quote@ +@@ -241,6 +261,7 @@ + libexecdir = @libexecdir@ + localedir = @localedir@ + localstatedir = @localstatedir@ ++lt_ECHO = @lt_ECHO@ + mandir = @mandir@ + mkdir_p = @mkdir_p@ + oldincludedir = @oldincludedir@ +@@ -253,7 +274,6 @@ + srcdir = @srcdir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ +-top_build_prefix = @top_build_prefix@ + top_builddir = @top_builddir@ + top_srcdir = @top_srcdir@ + NULL = +@@ -273,6 +293,9 @@ + schemasdir = $(GCONF_SCHEMA_FILE_DIR) + schemas_DATA = $(schemas_in_files:.schemas.in=.schemas) + bin_SCRIPTS = gnome-wm ++appsdir = $(datadir)/applications ++apps_in_files = gnome-wm.desktop.in ++apps_DATA = $(apps_in_files:.desktop.in=.desktop) + settingsdir = $(datadir)/applications + settings_in_files = session-properties.desktop.in + settings_DATA = $(settings_in_files:.desktop.in=.desktop) +@@ -280,6 +303,7 @@ + gnome-wm \ + $(xsession_in_files) \ + $(schemas_in_files) \ ++ $(apps_in_files) \ + $(glade_DATA) \ + $(pixmap_DATA) + +@@ -289,6 +313,7 @@ + $(settings_DATA) + + DISTCLEANFILES = \ ++ $(apps_DATA) \ + $(settings_in_files) + + all: all-recursive +@@ -352,6 +377,23 @@ + + clean-libtool: + -rm -rf .libs _libs ++install-appsDATA: $(apps_DATA) ++ @$(NORMAL_INSTALL) ++ test -z "$(appsdir)" || $(MKDIR_P) "$(DESTDIR)$(appsdir)" ++ @list='$(apps_DATA)'; for p in $$list; do \ ++ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ ++ f=$(am__strip_dir) \ ++ echo " $(appsDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(appsdir)/$$f'"; \ ++ $(appsDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(appsdir)/$$f"; \ ++ done ++ ++uninstall-appsDATA: ++ @$(NORMAL_UNINSTALL) ++ @list='$(apps_DATA)'; for p in $$list; do \ ++ f=$(am__strip_dir) \ ++ echo " rm -f '$(DESTDIR)$(appsdir)/$$f'"; \ ++ rm -f "$(DESTDIR)$(appsdir)/$$f"; \ ++ done + install-gladeDATA: $(glade_DATA) + @$(NORMAL_INSTALL) + test -z "$(gladedir)" || $(MKDIR_P) "$(DESTDIR)$(gladedir)" +@@ -616,7 +658,7 @@ + all-am: Makefile $(SCRIPTS) $(DATA) + installdirs: installdirs-recursive + installdirs-am: +- for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(gladedir)" "$(DESTDIR)$(pixmapdir)" "$(DESTDIR)$(schemasdir)" "$(DESTDIR)$(settingsdir)" "$(DESTDIR)$(xsessiondir)"; do \ ++ for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(appsdir)" "$(DESTDIR)$(gladedir)" "$(DESTDIR)$(pixmapdir)" "$(DESTDIR)$(schemasdir)" "$(DESTDIR)$(settingsdir)" "$(DESTDIR)$(xsessiondir)"; do \ + test -z "$$dir" || $(MKDIR_P) "$$dir"; \ + done + install: install-recursive +@@ -663,7 +705,7 @@ + + info-am: + +-install-data-am: install-data-local install-gladeDATA \ ++install-data-am: install-appsDATA install-data-local install-gladeDATA \ + install-pixmapDATA install-schemasDATA install-settingsDATA \ + install-xsessionDATA + +@@ -699,8 +741,8 @@ + + ps-am: + +-uninstall-am: uninstall-binSCRIPTS uninstall-gladeDATA \ +- uninstall-pixmapDATA uninstall-schemasDATA \ ++uninstall-am: uninstall-appsDATA uninstall-binSCRIPTS \ ++ uninstall-gladeDATA uninstall-pixmapDATA uninstall-schemasDATA \ + uninstall-settingsDATA uninstall-xsessionDATA + + .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \ +@@ -710,20 +752,20 @@ + all all-am check check-am clean clean-generic clean-libtool \ + ctags ctags-recursive distclean distclean-generic \ + distclean-libtool distclean-tags distdir dvi dvi-am html \ +- html-am info info-am install install-am install-binSCRIPTS \ +- install-data install-data-am install-data-local install-dvi \ +- install-dvi-am install-exec install-exec-am install-gladeDATA \ +- install-html install-html-am install-info install-info-am \ +- install-man install-pdf install-pdf-am install-pixmapDATA \ +- install-ps install-ps-am install-schemasDATA \ +- install-settingsDATA install-strip install-xsessionDATA \ +- installcheck installcheck-am installdirs installdirs-am \ +- maintainer-clean maintainer-clean-generic mostlyclean \ +- mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ +- tags tags-recursive uninstall uninstall-am \ +- uninstall-binSCRIPTS uninstall-gladeDATA uninstall-pixmapDATA \ +- uninstall-schemasDATA uninstall-settingsDATA \ +- uninstall-xsessionDATA ++ html-am info info-am install install-am install-appsDATA \ ++ install-binSCRIPTS install-data install-data-am \ ++ install-data-local install-dvi install-dvi-am install-exec \ ++ install-exec-am install-gladeDATA install-html install-html-am \ ++ install-info install-info-am install-man install-pdf \ ++ install-pdf-am install-pixmapDATA install-ps install-ps-am \ ++ install-schemasDATA install-settingsDATA install-strip \ ++ install-xsessionDATA installcheck installcheck-am installdirs \ ++ installdirs-am maintainer-clean maintainer-clean-generic \ ++ mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \ ++ ps ps-am tags tags-recursive uninstall uninstall-am \ ++ uninstall-appsDATA uninstall-binSCRIPTS uninstall-gladeDATA \ ++ uninstall-pixmapDATA uninstall-schemasDATA \ ++ uninstall-settingsDATA uninstall-xsessionDATA + + + @INTLTOOL_DESKTOP_RULE@ +Index: gnome-session-2.25.90/data/icons/16x16/Makefile.in +=================================================================== +--- gnome-session-2.25.90.orig/data/icons/16x16/Makefile.in 2009-02-04 18:27:50.000000000 +0000 ++++ gnome-session-2.25.90/data/icons/16x16/Makefile.in 2009-02-04 18:29:59.000000000 +0000 +@@ -72,10 +72,6 @@ + COMPAT_LIBS = @COMPAT_LIBS@ + CPP = @CPP@ + CPPFLAGS = @CPPFLAGS@ +-CXX = @CXX@ +-CXXCPP = @CXXCPP@ +-CXXDEPMODE = @CXXDEPMODE@ +-CXXFLAGS = @CXXFLAGS@ + CYGPATH_W = @CYGPATH_W@ + DATADIRNAME = @DATADIRNAME@ + DBUS_GLIB_CFLAGS = @DBUS_GLIB_CFLAGS@ +@@ -85,7 +81,7 @@ + DISABLE_DEPRECATED = @DISABLE_DEPRECATED@ + DISABLE_DEPRECATED_CFLAGS = @DISABLE_DEPRECATED_CFLAGS@ + DSYMUTIL = @DSYMUTIL@ +-ECHO = @ECHO@ ++DUMPBIN = @DUMPBIN@ + ECHO_C = @ECHO_C@ + ECHO_N = @ECHO_N@ + ECHO_T = @ECHO_T@ +@@ -93,8 +89,7 @@ + EGG_SMCLIENT_LIBS = @EGG_SMCLIENT_LIBS@ + EGREP = @EGREP@ + EXEEXT = @EXEEXT@ +-F77 = @F77@ +-FFLAGS = @FFLAGS@ ++FGREP = @FGREP@ + GCONFTOOL = @GCONFTOOL@ + GCONF_CFLAGS = @GCONF_CFLAGS@ + GCONF_LIBS = @GCONF_LIBS@ +@@ -119,14 +114,35 @@ + INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ + INSTOBJEXT = @INSTOBJEXT@ + INTLLIBS = @INTLLIBS@ ++INTLTOOL_CAVES_RULE = @INTLTOOL_CAVES_RULE@ ++INTLTOOL_DESKTOP_RULE = @INTLTOOL_DESKTOP_RULE@ ++INTLTOOL_DIRECTORY_RULE = @INTLTOOL_DIRECTORY_RULE@ + INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ ++INTLTOOL_KBD_RULE = @INTLTOOL_KBD_RULE@ ++INTLTOOL_KEYS_RULE = @INTLTOOL_KEYS_RULE@ + INTLTOOL_MERGE = @INTLTOOL_MERGE@ ++INTLTOOL_OAF_RULE = @INTLTOOL_OAF_RULE@ + INTLTOOL_PERL = @INTLTOOL_PERL@ ++INTLTOOL_POLICY_RULE = @INTLTOOL_POLICY_RULE@ ++INTLTOOL_PONG_RULE = @INTLTOOL_PONG_RULE@ ++INTLTOOL_PROP_RULE = @INTLTOOL_PROP_RULE@ ++INTLTOOL_SCHEMAS_RULE = @INTLTOOL_SCHEMAS_RULE@ ++INTLTOOL_SERVER_RULE = @INTLTOOL_SERVER_RULE@ ++INTLTOOL_SERVICE_RULE = @INTLTOOL_SERVICE_RULE@ ++INTLTOOL_SHEET_RULE = @INTLTOOL_SHEET_RULE@ ++INTLTOOL_SOUNDLIST_RULE = @INTLTOOL_SOUNDLIST_RULE@ ++INTLTOOL_THEME_RULE = @INTLTOOL_THEME_RULE@ ++INTLTOOL_UI_RULE = @INTLTOOL_UI_RULE@ + INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ ++INTLTOOL_XAM_RULE = @INTLTOOL_XAM_RULE@ ++INTLTOOL_XML_NOMERGE_RULE = @INTLTOOL_XML_NOMERGE_RULE@ ++INTLTOOL_XML_RULE = @INTLTOOL_XML_RULE@ ++LD = @LD@ + LDFLAGS = @LDFLAGS@ + LIBOBJS = @LIBOBJS@ + LIBS = @LIBS@ + LIBTOOL = @LIBTOOL@ ++LIPO = @LIPO@ + LN_S = @LN_S@ + LTLIBOBJS = @LTLIBOBJS@ + MAINT = @MAINT@ +@@ -136,8 +152,11 @@ + MSGFMT = @MSGFMT@ + MSGFMT_OPTS = @MSGFMT_OPTS@ + MSGMERGE = @MSGMERGE@ ++NM = @NM@ + NMEDIT = @NMEDIT@ + OBJEXT = @OBJEXT@ ++OTOOL = @OTOOL@ ++OTOOL64 = @OTOOL64@ + PACKAGE = @PACKAGE@ + PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ + PACKAGE_NAME = @PACKAGE_NAME@ +@@ -185,8 +204,7 @@ + abs_top_builddir = @abs_top_builddir@ + abs_top_srcdir = @abs_top_srcdir@ + ac_ct_CC = @ac_ct_CC@ +-ac_ct_CXX = @ac_ct_CXX@ +-ac_ct_F77 = @ac_ct_F77@ ++ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ + am__include = @am__include@ + am__leading_dot = @am__leading_dot@ + am__quote = @am__quote@ +@@ -217,6 +235,7 @@ + libexecdir = @libexecdir@ + localedir = @localedir@ + localstatedir = @localstatedir@ ++lt_ECHO = @lt_ECHO@ + mandir = @mandir@ + mkdir_p = @mkdir_p@ + oldincludedir = @oldincludedir@ +@@ -229,7 +248,6 @@ + srcdir = @srcdir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ +-top_build_prefix = @top_build_prefix@ + top_builddir = @top_builddir@ + top_srcdir = @top_srcdir@ + size = 16x16 +Index: gnome-session-2.25.90/data/icons/22x22/Makefile.in +=================================================================== +--- gnome-session-2.25.90.orig/data/icons/22x22/Makefile.in 2009-02-04 18:27:58.000000000 +0000 ++++ gnome-session-2.25.90/data/icons/22x22/Makefile.in 2009-02-04 18:29:59.000000000 +0000 +@@ -72,10 +72,6 @@ + COMPAT_LIBS = @COMPAT_LIBS@ + CPP = @CPP@ + CPPFLAGS = @CPPFLAGS@ +-CXX = @CXX@ +-CXXCPP = @CXXCPP@ +-CXXDEPMODE = @CXXDEPMODE@ +-CXXFLAGS = @CXXFLAGS@ + CYGPATH_W = @CYGPATH_W@ + DATADIRNAME = @DATADIRNAME@ + DBUS_GLIB_CFLAGS = @DBUS_GLIB_CFLAGS@ +@@ -85,7 +81,7 @@ + DISABLE_DEPRECATED = @DISABLE_DEPRECATED@ + DISABLE_DEPRECATED_CFLAGS = @DISABLE_DEPRECATED_CFLAGS@ + DSYMUTIL = @DSYMUTIL@ +-ECHO = @ECHO@ ++DUMPBIN = @DUMPBIN@ + ECHO_C = @ECHO_C@ + ECHO_N = @ECHO_N@ + ECHO_T = @ECHO_T@ +@@ -93,8 +89,7 @@ + EGG_SMCLIENT_LIBS = @EGG_SMCLIENT_LIBS@ + EGREP = @EGREP@ + EXEEXT = @EXEEXT@ +-F77 = @F77@ +-FFLAGS = @FFLAGS@ ++FGREP = @FGREP@ + GCONFTOOL = @GCONFTOOL@ + GCONF_CFLAGS = @GCONF_CFLAGS@ + GCONF_LIBS = @GCONF_LIBS@ +@@ -119,14 +114,35 @@ + INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ + INSTOBJEXT = @INSTOBJEXT@ + INTLLIBS = @INTLLIBS@ ++INTLTOOL_CAVES_RULE = @INTLTOOL_CAVES_RULE@ ++INTLTOOL_DESKTOP_RULE = @INTLTOOL_DESKTOP_RULE@ ++INTLTOOL_DIRECTORY_RULE = @INTLTOOL_DIRECTORY_RULE@ + INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ ++INTLTOOL_KBD_RULE = @INTLTOOL_KBD_RULE@ ++INTLTOOL_KEYS_RULE = @INTLTOOL_KEYS_RULE@ + INTLTOOL_MERGE = @INTLTOOL_MERGE@ ++INTLTOOL_OAF_RULE = @INTLTOOL_OAF_RULE@ + INTLTOOL_PERL = @INTLTOOL_PERL@ ++INTLTOOL_POLICY_RULE = @INTLTOOL_POLICY_RULE@ ++INTLTOOL_PONG_RULE = @INTLTOOL_PONG_RULE@ ++INTLTOOL_PROP_RULE = @INTLTOOL_PROP_RULE@ ++INTLTOOL_SCHEMAS_RULE = @INTLTOOL_SCHEMAS_RULE@ ++INTLTOOL_SERVER_RULE = @INTLTOOL_SERVER_RULE@ ++INTLTOOL_SERVICE_RULE = @INTLTOOL_SERVICE_RULE@ ++INTLTOOL_SHEET_RULE = @INTLTOOL_SHEET_RULE@ ++INTLTOOL_SOUNDLIST_RULE = @INTLTOOL_SOUNDLIST_RULE@ ++INTLTOOL_THEME_RULE = @INTLTOOL_THEME_RULE@ ++INTLTOOL_UI_RULE = @INTLTOOL_UI_RULE@ + INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ ++INTLTOOL_XAM_RULE = @INTLTOOL_XAM_RULE@ ++INTLTOOL_XML_NOMERGE_RULE = @INTLTOOL_XML_NOMERGE_RULE@ ++INTLTOOL_XML_RULE = @INTLTOOL_XML_RULE@ ++LD = @LD@ + LDFLAGS = @LDFLAGS@ + LIBOBJS = @LIBOBJS@ + LIBS = @LIBS@ + LIBTOOL = @LIBTOOL@ ++LIPO = @LIPO@ + LN_S = @LN_S@ + LTLIBOBJS = @LTLIBOBJS@ + MAINT = @MAINT@ +@@ -136,8 +152,11 @@ + MSGFMT = @MSGFMT@ + MSGFMT_OPTS = @MSGFMT_OPTS@ + MSGMERGE = @MSGMERGE@ ++NM = @NM@ + NMEDIT = @NMEDIT@ + OBJEXT = @OBJEXT@ ++OTOOL = @OTOOL@ ++OTOOL64 = @OTOOL64@ + PACKAGE = @PACKAGE@ + PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ + PACKAGE_NAME = @PACKAGE_NAME@ +@@ -185,8 +204,7 @@ + abs_top_builddir = @abs_top_builddir@ + abs_top_srcdir = @abs_top_srcdir@ + ac_ct_CC = @ac_ct_CC@ +-ac_ct_CXX = @ac_ct_CXX@ +-ac_ct_F77 = @ac_ct_F77@ ++ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ + am__include = @am__include@ + am__leading_dot = @am__leading_dot@ + am__quote = @am__quote@ +@@ -217,6 +235,7 @@ + libexecdir = @libexecdir@ + localedir = @localedir@ + localstatedir = @localstatedir@ ++lt_ECHO = @lt_ECHO@ + mandir = @mandir@ + mkdir_p = @mkdir_p@ + oldincludedir = @oldincludedir@ +@@ -229,7 +248,6 @@ + srcdir = @srcdir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ +-top_build_prefix = @top_build_prefix@ + top_builddir = @top_builddir@ + top_srcdir = @top_srcdir@ + size = 22x22 +Index: gnome-session-2.25.90/data/icons/24x24/Makefile.in +=================================================================== +--- gnome-session-2.25.90.orig/data/icons/24x24/Makefile.in 2009-02-04 18:28:07.000000000 +0000 ++++ gnome-session-2.25.90/data/icons/24x24/Makefile.in 2009-02-04 18:29:59.000000000 +0000 +@@ -72,10 +72,6 @@ + COMPAT_LIBS = @COMPAT_LIBS@ + CPP = @CPP@ + CPPFLAGS = @CPPFLAGS@ +-CXX = @CXX@ +-CXXCPP = @CXXCPP@ +-CXXDEPMODE = @CXXDEPMODE@ +-CXXFLAGS = @CXXFLAGS@ + CYGPATH_W = @CYGPATH_W@ + DATADIRNAME = @DATADIRNAME@ + DBUS_GLIB_CFLAGS = @DBUS_GLIB_CFLAGS@ +@@ -85,7 +81,7 @@ + DISABLE_DEPRECATED = @DISABLE_DEPRECATED@ + DISABLE_DEPRECATED_CFLAGS = @DISABLE_DEPRECATED_CFLAGS@ + DSYMUTIL = @DSYMUTIL@ +-ECHO = @ECHO@ ++DUMPBIN = @DUMPBIN@ + ECHO_C = @ECHO_C@ + ECHO_N = @ECHO_N@ + ECHO_T = @ECHO_T@ +@@ -93,8 +89,7 @@ + EGG_SMCLIENT_LIBS = @EGG_SMCLIENT_LIBS@ + EGREP = @EGREP@ + EXEEXT = @EXEEXT@ +-F77 = @F77@ +-FFLAGS = @FFLAGS@ ++FGREP = @FGREP@ + GCONFTOOL = @GCONFTOOL@ + GCONF_CFLAGS = @GCONF_CFLAGS@ + GCONF_LIBS = @GCONF_LIBS@ +@@ -119,14 +114,35 @@ + INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ + INSTOBJEXT = @INSTOBJEXT@ + INTLLIBS = @INTLLIBS@ ++INTLTOOL_CAVES_RULE = @INTLTOOL_CAVES_RULE@ ++INTLTOOL_DESKTOP_RULE = @INTLTOOL_DESKTOP_RULE@ ++INTLTOOL_DIRECTORY_RULE = @INTLTOOL_DIRECTORY_RULE@ + INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ ++INTLTOOL_KBD_RULE = @INTLTOOL_KBD_RULE@ ++INTLTOOL_KEYS_RULE = @INTLTOOL_KEYS_RULE@ + INTLTOOL_MERGE = @INTLTOOL_MERGE@ ++INTLTOOL_OAF_RULE = @INTLTOOL_OAF_RULE@ + INTLTOOL_PERL = @INTLTOOL_PERL@ ++INTLTOOL_POLICY_RULE = @INTLTOOL_POLICY_RULE@ ++INTLTOOL_PONG_RULE = @INTLTOOL_PONG_RULE@ ++INTLTOOL_PROP_RULE = @INTLTOOL_PROP_RULE@ ++INTLTOOL_SCHEMAS_RULE = @INTLTOOL_SCHEMAS_RULE@ ++INTLTOOL_SERVER_RULE = @INTLTOOL_SERVER_RULE@ ++INTLTOOL_SERVICE_RULE = @INTLTOOL_SERVICE_RULE@ ++INTLTOOL_SHEET_RULE = @INTLTOOL_SHEET_RULE@ ++INTLTOOL_SOUNDLIST_RULE = @INTLTOOL_SOUNDLIST_RULE@ ++INTLTOOL_THEME_RULE = @INTLTOOL_THEME_RULE@ ++INTLTOOL_UI_RULE = @INTLTOOL_UI_RULE@ + INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ ++INTLTOOL_XAM_RULE = @INTLTOOL_XAM_RULE@ ++INTLTOOL_XML_NOMERGE_RULE = @INTLTOOL_XML_NOMERGE_RULE@ ++INTLTOOL_XML_RULE = @INTLTOOL_XML_RULE@ ++LD = @LD@ + LDFLAGS = @LDFLAGS@ + LIBOBJS = @LIBOBJS@ + LIBS = @LIBS@ + LIBTOOL = @LIBTOOL@ ++LIPO = @LIPO@ + LN_S = @LN_S@ + LTLIBOBJS = @LTLIBOBJS@ + MAINT = @MAINT@ +@@ -136,8 +152,11 @@ + MSGFMT = @MSGFMT@ + MSGFMT_OPTS = @MSGFMT_OPTS@ + MSGMERGE = @MSGMERGE@ ++NM = @NM@ + NMEDIT = @NMEDIT@ + OBJEXT = @OBJEXT@ ++OTOOL = @OTOOL@ ++OTOOL64 = @OTOOL64@ + PACKAGE = @PACKAGE@ + PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ + PACKAGE_NAME = @PACKAGE_NAME@ +@@ -185,8 +204,7 @@ + abs_top_builddir = @abs_top_builddir@ + abs_top_srcdir = @abs_top_srcdir@ + ac_ct_CC = @ac_ct_CC@ +-ac_ct_CXX = @ac_ct_CXX@ +-ac_ct_F77 = @ac_ct_F77@ ++ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ + am__include = @am__include@ + am__leading_dot = @am__leading_dot@ + am__quote = @am__quote@ +@@ -217,6 +235,7 @@ + libexecdir = @libexecdir@ + localedir = @localedir@ + localstatedir = @localstatedir@ ++lt_ECHO = @lt_ECHO@ + mandir = @mandir@ + mkdir_p = @mkdir_p@ + oldincludedir = @oldincludedir@ +@@ -229,7 +248,6 @@ + srcdir = @srcdir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ +-top_build_prefix = @top_build_prefix@ + top_builddir = @top_builddir@ + top_srcdir = @top_srcdir@ + size = 24x24 +Index: gnome-session-2.25.90/data/icons/32x32/Makefile.in +=================================================================== +--- gnome-session-2.25.90.orig/data/icons/32x32/Makefile.in 2009-02-04 18:28:16.000000000 +0000 ++++ gnome-session-2.25.90/data/icons/32x32/Makefile.in 2009-02-04 18:29:59.000000000 +0000 +@@ -72,10 +72,6 @@ + COMPAT_LIBS = @COMPAT_LIBS@ + CPP = @CPP@ + CPPFLAGS = @CPPFLAGS@ +-CXX = @CXX@ +-CXXCPP = @CXXCPP@ +-CXXDEPMODE = @CXXDEPMODE@ +-CXXFLAGS = @CXXFLAGS@ + CYGPATH_W = @CYGPATH_W@ + DATADIRNAME = @DATADIRNAME@ + DBUS_GLIB_CFLAGS = @DBUS_GLIB_CFLAGS@ +@@ -85,7 +81,7 @@ + DISABLE_DEPRECATED = @DISABLE_DEPRECATED@ + DISABLE_DEPRECATED_CFLAGS = @DISABLE_DEPRECATED_CFLAGS@ + DSYMUTIL = @DSYMUTIL@ +-ECHO = @ECHO@ ++DUMPBIN = @DUMPBIN@ + ECHO_C = @ECHO_C@ + ECHO_N = @ECHO_N@ + ECHO_T = @ECHO_T@ +@@ -93,8 +89,7 @@ + EGG_SMCLIENT_LIBS = @EGG_SMCLIENT_LIBS@ + EGREP = @EGREP@ + EXEEXT = @EXEEXT@ +-F77 = @F77@ +-FFLAGS = @FFLAGS@ ++FGREP = @FGREP@ + GCONFTOOL = @GCONFTOOL@ + GCONF_CFLAGS = @GCONF_CFLAGS@ + GCONF_LIBS = @GCONF_LIBS@ +@@ -119,14 +114,35 @@ + INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ + INSTOBJEXT = @INSTOBJEXT@ + INTLLIBS = @INTLLIBS@ ++INTLTOOL_CAVES_RULE = @INTLTOOL_CAVES_RULE@ ++INTLTOOL_DESKTOP_RULE = @INTLTOOL_DESKTOP_RULE@ ++INTLTOOL_DIRECTORY_RULE = @INTLTOOL_DIRECTORY_RULE@ + INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ ++INTLTOOL_KBD_RULE = @INTLTOOL_KBD_RULE@ ++INTLTOOL_KEYS_RULE = @INTLTOOL_KEYS_RULE@ + INTLTOOL_MERGE = @INTLTOOL_MERGE@ ++INTLTOOL_OAF_RULE = @INTLTOOL_OAF_RULE@ + INTLTOOL_PERL = @INTLTOOL_PERL@ ++INTLTOOL_POLICY_RULE = @INTLTOOL_POLICY_RULE@ ++INTLTOOL_PONG_RULE = @INTLTOOL_PONG_RULE@ ++INTLTOOL_PROP_RULE = @INTLTOOL_PROP_RULE@ ++INTLTOOL_SCHEMAS_RULE = @INTLTOOL_SCHEMAS_RULE@ ++INTLTOOL_SERVER_RULE = @INTLTOOL_SERVER_RULE@ ++INTLTOOL_SERVICE_RULE = @INTLTOOL_SERVICE_RULE@ ++INTLTOOL_SHEET_RULE = @INTLTOOL_SHEET_RULE@ ++INTLTOOL_SOUNDLIST_RULE = @INTLTOOL_SOUNDLIST_RULE@ ++INTLTOOL_THEME_RULE = @INTLTOOL_THEME_RULE@ ++INTLTOOL_UI_RULE = @INTLTOOL_UI_RULE@ + INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ ++INTLTOOL_XAM_RULE = @INTLTOOL_XAM_RULE@ ++INTLTOOL_XML_NOMERGE_RULE = @INTLTOOL_XML_NOMERGE_RULE@ ++INTLTOOL_XML_RULE = @INTLTOOL_XML_RULE@ ++LD = @LD@ + LDFLAGS = @LDFLAGS@ + LIBOBJS = @LIBOBJS@ + LIBS = @LIBS@ + LIBTOOL = @LIBTOOL@ ++LIPO = @LIPO@ + LN_S = @LN_S@ + LTLIBOBJS = @LTLIBOBJS@ + MAINT = @MAINT@ +@@ -136,8 +152,11 @@ + MSGFMT = @MSGFMT@ + MSGFMT_OPTS = @MSGFMT_OPTS@ + MSGMERGE = @MSGMERGE@ ++NM = @NM@ + NMEDIT = @NMEDIT@ + OBJEXT = @OBJEXT@ ++OTOOL = @OTOOL@ ++OTOOL64 = @OTOOL64@ + PACKAGE = @PACKAGE@ + PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ + PACKAGE_NAME = @PACKAGE_NAME@ +@@ -185,8 +204,7 @@ + abs_top_builddir = @abs_top_builddir@ + abs_top_srcdir = @abs_top_srcdir@ + ac_ct_CC = @ac_ct_CC@ +-ac_ct_CXX = @ac_ct_CXX@ +-ac_ct_F77 = @ac_ct_F77@ ++ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ + am__include = @am__include@ + am__leading_dot = @am__leading_dot@ + am__quote = @am__quote@ +@@ -217,6 +235,7 @@ + libexecdir = @libexecdir@ + localedir = @localedir@ + localstatedir = @localstatedir@ ++lt_ECHO = @lt_ECHO@ + mandir = @mandir@ + mkdir_p = @mkdir_p@ + oldincludedir = @oldincludedir@ +@@ -229,7 +248,6 @@ + srcdir = @srcdir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ +-top_build_prefix = @top_build_prefix@ + top_builddir = @top_builddir@ + top_srcdir = @top_srcdir@ + size = 32x32 +Index: gnome-session-2.25.90/data/icons/48x48/Makefile.in +=================================================================== +--- gnome-session-2.25.90.orig/data/icons/48x48/Makefile.in 2009-02-04 18:28:24.000000000 +0000 ++++ gnome-session-2.25.90/data/icons/48x48/Makefile.in 2009-02-04 18:29:59.000000000 +0000 +@@ -72,10 +72,6 @@ + COMPAT_LIBS = @COMPAT_LIBS@ + CPP = @CPP@ + CPPFLAGS = @CPPFLAGS@ +-CXX = @CXX@ +-CXXCPP = @CXXCPP@ +-CXXDEPMODE = @CXXDEPMODE@ +-CXXFLAGS = @CXXFLAGS@ + CYGPATH_W = @CYGPATH_W@ + DATADIRNAME = @DATADIRNAME@ + DBUS_GLIB_CFLAGS = @DBUS_GLIB_CFLAGS@ +@@ -85,7 +81,7 @@ + DISABLE_DEPRECATED = @DISABLE_DEPRECATED@ + DISABLE_DEPRECATED_CFLAGS = @DISABLE_DEPRECATED_CFLAGS@ + DSYMUTIL = @DSYMUTIL@ +-ECHO = @ECHO@ ++DUMPBIN = @DUMPBIN@ + ECHO_C = @ECHO_C@ + ECHO_N = @ECHO_N@ + ECHO_T = @ECHO_T@ +@@ -93,8 +89,7 @@ + EGG_SMCLIENT_LIBS = @EGG_SMCLIENT_LIBS@ + EGREP = @EGREP@ + EXEEXT = @EXEEXT@ +-F77 = @F77@ +-FFLAGS = @FFLAGS@ ++FGREP = @FGREP@ + GCONFTOOL = @GCONFTOOL@ + GCONF_CFLAGS = @GCONF_CFLAGS@ + GCONF_LIBS = @GCONF_LIBS@ +@@ -119,14 +114,35 @@ + INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ + INSTOBJEXT = @INSTOBJEXT@ + INTLLIBS = @INTLLIBS@ ++INTLTOOL_CAVES_RULE = @INTLTOOL_CAVES_RULE@ ++INTLTOOL_DESKTOP_RULE = @INTLTOOL_DESKTOP_RULE@ ++INTLTOOL_DIRECTORY_RULE = @INTLTOOL_DIRECTORY_RULE@ + INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ ++INTLTOOL_KBD_RULE = @INTLTOOL_KBD_RULE@ ++INTLTOOL_KEYS_RULE = @INTLTOOL_KEYS_RULE@ + INTLTOOL_MERGE = @INTLTOOL_MERGE@ ++INTLTOOL_OAF_RULE = @INTLTOOL_OAF_RULE@ + INTLTOOL_PERL = @INTLTOOL_PERL@ ++INTLTOOL_POLICY_RULE = @INTLTOOL_POLICY_RULE@ ++INTLTOOL_PONG_RULE = @INTLTOOL_PONG_RULE@ ++INTLTOOL_PROP_RULE = @INTLTOOL_PROP_RULE@ ++INTLTOOL_SCHEMAS_RULE = @INTLTOOL_SCHEMAS_RULE@ ++INTLTOOL_SERVER_RULE = @INTLTOOL_SERVER_RULE@ ++INTLTOOL_SERVICE_RULE = @INTLTOOL_SERVICE_RULE@ ++INTLTOOL_SHEET_RULE = @INTLTOOL_SHEET_RULE@ ++INTLTOOL_SOUNDLIST_RULE = @INTLTOOL_SOUNDLIST_RULE@ ++INTLTOOL_THEME_RULE = @INTLTOOL_THEME_RULE@ ++INTLTOOL_UI_RULE = @INTLTOOL_UI_RULE@ + INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ ++INTLTOOL_XAM_RULE = @INTLTOOL_XAM_RULE@ ++INTLTOOL_XML_NOMERGE_RULE = @INTLTOOL_XML_NOMERGE_RULE@ ++INTLTOOL_XML_RULE = @INTLTOOL_XML_RULE@ ++LD = @LD@ + LDFLAGS = @LDFLAGS@ + LIBOBJS = @LIBOBJS@ + LIBS = @LIBS@ + LIBTOOL = @LIBTOOL@ ++LIPO = @LIPO@ + LN_S = @LN_S@ + LTLIBOBJS = @LTLIBOBJS@ + MAINT = @MAINT@ +@@ -136,8 +152,11 @@ + MSGFMT = @MSGFMT@ + MSGFMT_OPTS = @MSGFMT_OPTS@ + MSGMERGE = @MSGMERGE@ ++NM = @NM@ + NMEDIT = @NMEDIT@ + OBJEXT = @OBJEXT@ ++OTOOL = @OTOOL@ ++OTOOL64 = @OTOOL64@ + PACKAGE = @PACKAGE@ + PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ + PACKAGE_NAME = @PACKAGE_NAME@ +@@ -185,8 +204,7 @@ + abs_top_builddir = @abs_top_builddir@ + abs_top_srcdir = @abs_top_srcdir@ + ac_ct_CC = @ac_ct_CC@ +-ac_ct_CXX = @ac_ct_CXX@ +-ac_ct_F77 = @ac_ct_F77@ ++ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ + am__include = @am__include@ + am__leading_dot = @am__leading_dot@ + am__quote = @am__quote@ +@@ -217,6 +235,7 @@ + libexecdir = @libexecdir@ + localedir = @localedir@ + localstatedir = @localstatedir@ ++lt_ECHO = @lt_ECHO@ + mandir = @mandir@ + mkdir_p = @mkdir_p@ + oldincludedir = @oldincludedir@ +@@ -229,7 +248,6 @@ + srcdir = @srcdir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ +-top_build_prefix = @top_build_prefix@ + top_builddir = @top_builddir@ + top_srcdir = @top_srcdir@ + size = 48x48 +Index: gnome-session-2.25.90/data/icons/Makefile.in +=================================================================== +--- gnome-session-2.25.90.orig/data/icons/Makefile.in 2009-02-04 18:28:30.000000000 +0000 ++++ gnome-session-2.25.90/data/icons/Makefile.in 2009-02-04 18:29:59.000000000 +0000 +@@ -74,10 +74,6 @@ + COMPAT_LIBS = @COMPAT_LIBS@ + CPP = @CPP@ + CPPFLAGS = @CPPFLAGS@ +-CXX = @CXX@ +-CXXCPP = @CXXCPP@ +-CXXDEPMODE = @CXXDEPMODE@ +-CXXFLAGS = @CXXFLAGS@ + CYGPATH_W = @CYGPATH_W@ + DATADIRNAME = @DATADIRNAME@ + DBUS_GLIB_CFLAGS = @DBUS_GLIB_CFLAGS@ +@@ -87,7 +83,7 @@ + DISABLE_DEPRECATED = @DISABLE_DEPRECATED@ + DISABLE_DEPRECATED_CFLAGS = @DISABLE_DEPRECATED_CFLAGS@ + DSYMUTIL = @DSYMUTIL@ +-ECHO = @ECHO@ ++DUMPBIN = @DUMPBIN@ + ECHO_C = @ECHO_C@ + ECHO_N = @ECHO_N@ + ECHO_T = @ECHO_T@ +@@ -95,8 +91,7 @@ + EGG_SMCLIENT_LIBS = @EGG_SMCLIENT_LIBS@ + EGREP = @EGREP@ + EXEEXT = @EXEEXT@ +-F77 = @F77@ +-FFLAGS = @FFLAGS@ ++FGREP = @FGREP@ + GCONFTOOL = @GCONFTOOL@ + GCONF_CFLAGS = @GCONF_CFLAGS@ + GCONF_LIBS = @GCONF_LIBS@ +@@ -121,14 +116,35 @@ + INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ + INSTOBJEXT = @INSTOBJEXT@ + INTLLIBS = @INTLLIBS@ ++INTLTOOL_CAVES_RULE = @INTLTOOL_CAVES_RULE@ ++INTLTOOL_DESKTOP_RULE = @INTLTOOL_DESKTOP_RULE@ ++INTLTOOL_DIRECTORY_RULE = @INTLTOOL_DIRECTORY_RULE@ + INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ ++INTLTOOL_KBD_RULE = @INTLTOOL_KBD_RULE@ ++INTLTOOL_KEYS_RULE = @INTLTOOL_KEYS_RULE@ + INTLTOOL_MERGE = @INTLTOOL_MERGE@ ++INTLTOOL_OAF_RULE = @INTLTOOL_OAF_RULE@ + INTLTOOL_PERL = @INTLTOOL_PERL@ ++INTLTOOL_POLICY_RULE = @INTLTOOL_POLICY_RULE@ ++INTLTOOL_PONG_RULE = @INTLTOOL_PONG_RULE@ ++INTLTOOL_PROP_RULE = @INTLTOOL_PROP_RULE@ ++INTLTOOL_SCHEMAS_RULE = @INTLTOOL_SCHEMAS_RULE@ ++INTLTOOL_SERVER_RULE = @INTLTOOL_SERVER_RULE@ ++INTLTOOL_SERVICE_RULE = @INTLTOOL_SERVICE_RULE@ ++INTLTOOL_SHEET_RULE = @INTLTOOL_SHEET_RULE@ ++INTLTOOL_SOUNDLIST_RULE = @INTLTOOL_SOUNDLIST_RULE@ ++INTLTOOL_THEME_RULE = @INTLTOOL_THEME_RULE@ ++INTLTOOL_UI_RULE = @INTLTOOL_UI_RULE@ + INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ ++INTLTOOL_XAM_RULE = @INTLTOOL_XAM_RULE@ ++INTLTOOL_XML_NOMERGE_RULE = @INTLTOOL_XML_NOMERGE_RULE@ ++INTLTOOL_XML_RULE = @INTLTOOL_XML_RULE@ ++LD = @LD@ + LDFLAGS = @LDFLAGS@ + LIBOBJS = @LIBOBJS@ + LIBS = @LIBS@ + LIBTOOL = @LIBTOOL@ ++LIPO = @LIPO@ + LN_S = @LN_S@ + LTLIBOBJS = @LTLIBOBJS@ + MAINT = @MAINT@ +@@ -138,8 +154,11 @@ + MSGFMT = @MSGFMT@ + MSGFMT_OPTS = @MSGFMT_OPTS@ + MSGMERGE = @MSGMERGE@ ++NM = @NM@ + NMEDIT = @NMEDIT@ + OBJEXT = @OBJEXT@ ++OTOOL = @OTOOL@ ++OTOOL64 = @OTOOL64@ + PACKAGE = @PACKAGE@ + PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ + PACKAGE_NAME = @PACKAGE_NAME@ +@@ -187,8 +206,7 @@ + abs_top_builddir = @abs_top_builddir@ + abs_top_srcdir = @abs_top_srcdir@ + ac_ct_CC = @ac_ct_CC@ +-ac_ct_CXX = @ac_ct_CXX@ +-ac_ct_F77 = @ac_ct_F77@ ++ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ + am__include = @am__include@ + am__leading_dot = @am__leading_dot@ + am__quote = @am__quote@ +@@ -219,6 +237,7 @@ + libexecdir = @libexecdir@ + localedir = @localedir@ + localstatedir = @localstatedir@ ++lt_ECHO = @lt_ECHO@ + mandir = @mandir@ + mkdir_p = @mkdir_p@ + oldincludedir = @oldincludedir@ +@@ -231,7 +250,6 @@ + srcdir = @srcdir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ +-top_build_prefix = @top_build_prefix@ + top_builddir = @top_builddir@ + top_srcdir = @top_srcdir@ + SUBDIRS = 16x16 22x22 24x24 32x32 48x48 scalable +Index: gnome-session-2.25.90/data/icons/scalable/Makefile.in +=================================================================== +--- gnome-session-2.25.90.orig/data/icons/scalable/Makefile.in 2009-02-04 18:28:36.000000000 +0000 ++++ gnome-session-2.25.90/data/icons/scalable/Makefile.in 2009-02-04 18:29:59.000000000 +0000 +@@ -72,10 +72,6 @@ + COMPAT_LIBS = @COMPAT_LIBS@ + CPP = @CPP@ + CPPFLAGS = @CPPFLAGS@ +-CXX = @CXX@ +-CXXCPP = @CXXCPP@ +-CXXDEPMODE = @CXXDEPMODE@ +-CXXFLAGS = @CXXFLAGS@ + CYGPATH_W = @CYGPATH_W@ + DATADIRNAME = @DATADIRNAME@ + DBUS_GLIB_CFLAGS = @DBUS_GLIB_CFLAGS@ +@@ -85,7 +81,7 @@ + DISABLE_DEPRECATED = @DISABLE_DEPRECATED@ + DISABLE_DEPRECATED_CFLAGS = @DISABLE_DEPRECATED_CFLAGS@ + DSYMUTIL = @DSYMUTIL@ +-ECHO = @ECHO@ ++DUMPBIN = @DUMPBIN@ + ECHO_C = @ECHO_C@ + ECHO_N = @ECHO_N@ + ECHO_T = @ECHO_T@ +@@ -93,8 +89,7 @@ + EGG_SMCLIENT_LIBS = @EGG_SMCLIENT_LIBS@ + EGREP = @EGREP@ + EXEEXT = @EXEEXT@ +-F77 = @F77@ +-FFLAGS = @FFLAGS@ ++FGREP = @FGREP@ + GCONFTOOL = @GCONFTOOL@ + GCONF_CFLAGS = @GCONF_CFLAGS@ + GCONF_LIBS = @GCONF_LIBS@ +@@ -119,14 +114,35 @@ + INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ + INSTOBJEXT = @INSTOBJEXT@ + INTLLIBS = @INTLLIBS@ ++INTLTOOL_CAVES_RULE = @INTLTOOL_CAVES_RULE@ ++INTLTOOL_DESKTOP_RULE = @INTLTOOL_DESKTOP_RULE@ ++INTLTOOL_DIRECTORY_RULE = @INTLTOOL_DIRECTORY_RULE@ + INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ ++INTLTOOL_KBD_RULE = @INTLTOOL_KBD_RULE@ ++INTLTOOL_KEYS_RULE = @INTLTOOL_KEYS_RULE@ + INTLTOOL_MERGE = @INTLTOOL_MERGE@ ++INTLTOOL_OAF_RULE = @INTLTOOL_OAF_RULE@ + INTLTOOL_PERL = @INTLTOOL_PERL@ ++INTLTOOL_POLICY_RULE = @INTLTOOL_POLICY_RULE@ ++INTLTOOL_PONG_RULE = @INTLTOOL_PONG_RULE@ ++INTLTOOL_PROP_RULE = @INTLTOOL_PROP_RULE@ ++INTLTOOL_SCHEMAS_RULE = @INTLTOOL_SCHEMAS_RULE@ ++INTLTOOL_SERVER_RULE = @INTLTOOL_SERVER_RULE@ ++INTLTOOL_SERVICE_RULE = @INTLTOOL_SERVICE_RULE@ ++INTLTOOL_SHEET_RULE = @INTLTOOL_SHEET_RULE@ ++INTLTOOL_SOUNDLIST_RULE = @INTLTOOL_SOUNDLIST_RULE@ ++INTLTOOL_THEME_RULE = @INTLTOOL_THEME_RULE@ ++INTLTOOL_UI_RULE = @INTLTOOL_UI_RULE@ + INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ ++INTLTOOL_XAM_RULE = @INTLTOOL_XAM_RULE@ ++INTLTOOL_XML_NOMERGE_RULE = @INTLTOOL_XML_NOMERGE_RULE@ ++INTLTOOL_XML_RULE = @INTLTOOL_XML_RULE@ ++LD = @LD@ + LDFLAGS = @LDFLAGS@ + LIBOBJS = @LIBOBJS@ + LIBS = @LIBS@ + LIBTOOL = @LIBTOOL@ ++LIPO = @LIPO@ + LN_S = @LN_S@ + LTLIBOBJS = @LTLIBOBJS@ + MAINT = @MAINT@ +@@ -136,8 +152,11 @@ + MSGFMT = @MSGFMT@ + MSGFMT_OPTS = @MSGFMT_OPTS@ + MSGMERGE = @MSGMERGE@ ++NM = @NM@ + NMEDIT = @NMEDIT@ + OBJEXT = @OBJEXT@ ++OTOOL = @OTOOL@ ++OTOOL64 = @OTOOL64@ + PACKAGE = @PACKAGE@ + PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ + PACKAGE_NAME = @PACKAGE_NAME@ +@@ -185,8 +204,7 @@ + abs_top_builddir = @abs_top_builddir@ + abs_top_srcdir = @abs_top_srcdir@ + ac_ct_CC = @ac_ct_CC@ +-ac_ct_CXX = @ac_ct_CXX@ +-ac_ct_F77 = @ac_ct_F77@ ++ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ + am__include = @am__include@ + am__leading_dot = @am__leading_dot@ + am__quote = @am__quote@ +@@ -217,6 +235,7 @@ + libexecdir = @libexecdir@ + localedir = @localedir@ + localstatedir = @localstatedir@ ++lt_ECHO = @lt_ECHO@ + mandir = @mandir@ + mkdir_p = @mkdir_p@ + oldincludedir = @oldincludedir@ +@@ -229,7 +248,6 @@ + srcdir = @srcdir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ +-top_build_prefix = @top_build_prefix@ + top_builddir = @top_builddir@ + top_srcdir = @top_srcdir@ + size = scalable +Index: gnome-session-2.25.90/doc/Makefile.in +=================================================================== +--- gnome-session-2.25.90.orig/doc/Makefile.in 2009-02-04 18:28:51.000000000 +0000 ++++ gnome-session-2.25.90/doc/Makefile.in 2009-02-04 18:30:00.000000000 +0000 +@@ -74,10 +74,6 @@ + COMPAT_LIBS = @COMPAT_LIBS@ + CPP = @CPP@ + CPPFLAGS = @CPPFLAGS@ +-CXX = @CXX@ +-CXXCPP = @CXXCPP@ +-CXXDEPMODE = @CXXDEPMODE@ +-CXXFLAGS = @CXXFLAGS@ + CYGPATH_W = @CYGPATH_W@ + DATADIRNAME = @DATADIRNAME@ + DBUS_GLIB_CFLAGS = @DBUS_GLIB_CFLAGS@ +@@ -87,7 +83,7 @@ + DISABLE_DEPRECATED = @DISABLE_DEPRECATED@ + DISABLE_DEPRECATED_CFLAGS = @DISABLE_DEPRECATED_CFLAGS@ + DSYMUTIL = @DSYMUTIL@ +-ECHO = @ECHO@ ++DUMPBIN = @DUMPBIN@ + ECHO_C = @ECHO_C@ + ECHO_N = @ECHO_N@ + ECHO_T = @ECHO_T@ +@@ -95,8 +91,7 @@ + EGG_SMCLIENT_LIBS = @EGG_SMCLIENT_LIBS@ + EGREP = @EGREP@ + EXEEXT = @EXEEXT@ +-F77 = @F77@ +-FFLAGS = @FFLAGS@ ++FGREP = @FGREP@ + GCONFTOOL = @GCONFTOOL@ + GCONF_CFLAGS = @GCONF_CFLAGS@ + GCONF_LIBS = @GCONF_LIBS@ +@@ -121,14 +116,35 @@ + INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ + INSTOBJEXT = @INSTOBJEXT@ + INTLLIBS = @INTLLIBS@ ++INTLTOOL_CAVES_RULE = @INTLTOOL_CAVES_RULE@ ++INTLTOOL_DESKTOP_RULE = @INTLTOOL_DESKTOP_RULE@ ++INTLTOOL_DIRECTORY_RULE = @INTLTOOL_DIRECTORY_RULE@ + INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ ++INTLTOOL_KBD_RULE = @INTLTOOL_KBD_RULE@ ++INTLTOOL_KEYS_RULE = @INTLTOOL_KEYS_RULE@ + INTLTOOL_MERGE = @INTLTOOL_MERGE@ ++INTLTOOL_OAF_RULE = @INTLTOOL_OAF_RULE@ + INTLTOOL_PERL = @INTLTOOL_PERL@ ++INTLTOOL_POLICY_RULE = @INTLTOOL_POLICY_RULE@ ++INTLTOOL_PONG_RULE = @INTLTOOL_PONG_RULE@ ++INTLTOOL_PROP_RULE = @INTLTOOL_PROP_RULE@ ++INTLTOOL_SCHEMAS_RULE = @INTLTOOL_SCHEMAS_RULE@ ++INTLTOOL_SERVER_RULE = @INTLTOOL_SERVER_RULE@ ++INTLTOOL_SERVICE_RULE = @INTLTOOL_SERVICE_RULE@ ++INTLTOOL_SHEET_RULE = @INTLTOOL_SHEET_RULE@ ++INTLTOOL_SOUNDLIST_RULE = @INTLTOOL_SOUNDLIST_RULE@ ++INTLTOOL_THEME_RULE = @INTLTOOL_THEME_RULE@ ++INTLTOOL_UI_RULE = @INTLTOOL_UI_RULE@ + INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ ++INTLTOOL_XAM_RULE = @INTLTOOL_XAM_RULE@ ++INTLTOOL_XML_NOMERGE_RULE = @INTLTOOL_XML_NOMERGE_RULE@ ++INTLTOOL_XML_RULE = @INTLTOOL_XML_RULE@ ++LD = @LD@ + LDFLAGS = @LDFLAGS@ + LIBOBJS = @LIBOBJS@ + LIBS = @LIBS@ + LIBTOOL = @LIBTOOL@ ++LIPO = @LIPO@ + LN_S = @LN_S@ + LTLIBOBJS = @LTLIBOBJS@ + MAINT = @MAINT@ +@@ -138,8 +154,11 @@ + MSGFMT = @MSGFMT@ + MSGFMT_OPTS = @MSGFMT_OPTS@ + MSGMERGE = @MSGMERGE@ ++NM = @NM@ + NMEDIT = @NMEDIT@ + OBJEXT = @OBJEXT@ ++OTOOL = @OTOOL@ ++OTOOL64 = @OTOOL64@ + PACKAGE = @PACKAGE@ + PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ + PACKAGE_NAME = @PACKAGE_NAME@ +@@ -187,8 +206,7 @@ + abs_top_builddir = @abs_top_builddir@ + abs_top_srcdir = @abs_top_srcdir@ + ac_ct_CC = @ac_ct_CC@ +-ac_ct_CXX = @ac_ct_CXX@ +-ac_ct_F77 = @ac_ct_F77@ ++ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ + am__include = @am__include@ + am__leading_dot = @am__leading_dot@ + am__quote = @am__quote@ +@@ -219,6 +237,7 @@ + libexecdir = @libexecdir@ + localedir = @localedir@ + localstatedir = @localstatedir@ ++lt_ECHO = @lt_ECHO@ + mandir = @mandir@ + mkdir_p = @mkdir_p@ + oldincludedir = @oldincludedir@ +@@ -231,7 +250,6 @@ + srcdir = @srcdir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ +-top_build_prefix = @top_build_prefix@ + top_builddir = @top_builddir@ + top_srcdir = @top_srcdir@ + SUBDIRS = dbus man +Index: gnome-session-2.25.90/doc/dbus/Makefile.in +=================================================================== +--- gnome-session-2.25.90.orig/doc/dbus/Makefile.in 2009-02-04 18:28:57.000000000 +0000 ++++ gnome-session-2.25.90/doc/dbus/Makefile.in 2009-02-04 18:30:00.000000000 +0000 +@@ -73,10 +73,6 @@ + COMPAT_LIBS = @COMPAT_LIBS@ + CPP = @CPP@ + CPPFLAGS = @CPPFLAGS@ +-CXX = @CXX@ +-CXXCPP = @CXXCPP@ +-CXXDEPMODE = @CXXDEPMODE@ +-CXXFLAGS = @CXXFLAGS@ + CYGPATH_W = @CYGPATH_W@ + DATADIRNAME = @DATADIRNAME@ + DBUS_GLIB_CFLAGS = @DBUS_GLIB_CFLAGS@ +@@ -86,7 +82,7 @@ + DISABLE_DEPRECATED = @DISABLE_DEPRECATED@ + DISABLE_DEPRECATED_CFLAGS = @DISABLE_DEPRECATED_CFLAGS@ + DSYMUTIL = @DSYMUTIL@ +-ECHO = @ECHO@ ++DUMPBIN = @DUMPBIN@ + ECHO_C = @ECHO_C@ + ECHO_N = @ECHO_N@ + ECHO_T = @ECHO_T@ +@@ -94,8 +90,7 @@ + EGG_SMCLIENT_LIBS = @EGG_SMCLIENT_LIBS@ + EGREP = @EGREP@ + EXEEXT = @EXEEXT@ +-F77 = @F77@ +-FFLAGS = @FFLAGS@ ++FGREP = @FGREP@ + GCONFTOOL = @GCONFTOOL@ + GCONF_CFLAGS = @GCONF_CFLAGS@ + GCONF_LIBS = @GCONF_LIBS@ +@@ -120,14 +115,35 @@ + INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ + INSTOBJEXT = @INSTOBJEXT@ + INTLLIBS = @INTLLIBS@ ++INTLTOOL_CAVES_RULE = @INTLTOOL_CAVES_RULE@ ++INTLTOOL_DESKTOP_RULE = @INTLTOOL_DESKTOP_RULE@ ++INTLTOOL_DIRECTORY_RULE = @INTLTOOL_DIRECTORY_RULE@ + INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ ++INTLTOOL_KBD_RULE = @INTLTOOL_KBD_RULE@ ++INTLTOOL_KEYS_RULE = @INTLTOOL_KEYS_RULE@ + INTLTOOL_MERGE = @INTLTOOL_MERGE@ ++INTLTOOL_OAF_RULE = @INTLTOOL_OAF_RULE@ + INTLTOOL_PERL = @INTLTOOL_PERL@ ++INTLTOOL_POLICY_RULE = @INTLTOOL_POLICY_RULE@ ++INTLTOOL_PONG_RULE = @INTLTOOL_PONG_RULE@ ++INTLTOOL_PROP_RULE = @INTLTOOL_PROP_RULE@ ++INTLTOOL_SCHEMAS_RULE = @INTLTOOL_SCHEMAS_RULE@ ++INTLTOOL_SERVER_RULE = @INTLTOOL_SERVER_RULE@ ++INTLTOOL_SERVICE_RULE = @INTLTOOL_SERVICE_RULE@ ++INTLTOOL_SHEET_RULE = @INTLTOOL_SHEET_RULE@ ++INTLTOOL_SOUNDLIST_RULE = @INTLTOOL_SOUNDLIST_RULE@ ++INTLTOOL_THEME_RULE = @INTLTOOL_THEME_RULE@ ++INTLTOOL_UI_RULE = @INTLTOOL_UI_RULE@ + INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ ++INTLTOOL_XAM_RULE = @INTLTOOL_XAM_RULE@ ++INTLTOOL_XML_NOMERGE_RULE = @INTLTOOL_XML_NOMERGE_RULE@ ++INTLTOOL_XML_RULE = @INTLTOOL_XML_RULE@ ++LD = @LD@ + LDFLAGS = @LDFLAGS@ + LIBOBJS = @LIBOBJS@ + LIBS = @LIBS@ + LIBTOOL = @LIBTOOL@ ++LIPO = @LIPO@ + LN_S = @LN_S@ + LTLIBOBJS = @LTLIBOBJS@ + MAINT = @MAINT@ +@@ -137,8 +153,11 @@ + MSGFMT = @MSGFMT@ + MSGFMT_OPTS = @MSGFMT_OPTS@ + MSGMERGE = @MSGMERGE@ ++NM = @NM@ + NMEDIT = @NMEDIT@ + OBJEXT = @OBJEXT@ ++OTOOL = @OTOOL@ ++OTOOL64 = @OTOOL64@ + PACKAGE = @PACKAGE@ + PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ + PACKAGE_NAME = @PACKAGE_NAME@ +@@ -186,8 +205,7 @@ + abs_top_builddir = @abs_top_builddir@ + abs_top_srcdir = @abs_top_srcdir@ + ac_ct_CC = @ac_ct_CC@ +-ac_ct_CXX = @ac_ct_CXX@ +-ac_ct_F77 = @ac_ct_F77@ ++ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ + am__include = @am__include@ + am__leading_dot = @am__leading_dot@ + am__quote = @am__quote@ +@@ -218,6 +236,7 @@ + libexecdir = @libexecdir@ + localedir = @localedir@ + localstatedir = @localstatedir@ ++lt_ECHO = @lt_ECHO@ + mandir = @mandir@ + mkdir_p = @mkdir_p@ + oldincludedir = @oldincludedir@ +@@ -230,7 +249,6 @@ + srcdir = @srcdir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ +-top_build_prefix = @top_build_prefix@ + top_builddir = @top_builddir@ + top_srcdir = @top_srcdir@ + NULL = +Index: gnome-session-2.25.90/doc/man/Makefile.in +=================================================================== +--- gnome-session-2.25.90.orig/doc/man/Makefile.in 2009-02-04 18:29:02.000000000 +0000 ++++ gnome-session-2.25.90/doc/man/Makefile.in 2009-02-04 18:30:00.000000000 +0000 +@@ -68,10 +68,6 @@ + COMPAT_LIBS = @COMPAT_LIBS@ + CPP = @CPP@ + CPPFLAGS = @CPPFLAGS@ +-CXX = @CXX@ +-CXXCPP = @CXXCPP@ +-CXXDEPMODE = @CXXDEPMODE@ +-CXXFLAGS = @CXXFLAGS@ + CYGPATH_W = @CYGPATH_W@ + DATADIRNAME = @DATADIRNAME@ + DBUS_GLIB_CFLAGS = @DBUS_GLIB_CFLAGS@ +@@ -81,7 +77,7 @@ + DISABLE_DEPRECATED = @DISABLE_DEPRECATED@ + DISABLE_DEPRECATED_CFLAGS = @DISABLE_DEPRECATED_CFLAGS@ + DSYMUTIL = @DSYMUTIL@ +-ECHO = @ECHO@ ++DUMPBIN = @DUMPBIN@ + ECHO_C = @ECHO_C@ + ECHO_N = @ECHO_N@ + ECHO_T = @ECHO_T@ +@@ -89,8 +85,7 @@ + EGG_SMCLIENT_LIBS = @EGG_SMCLIENT_LIBS@ + EGREP = @EGREP@ + EXEEXT = @EXEEXT@ +-F77 = @F77@ +-FFLAGS = @FFLAGS@ ++FGREP = @FGREP@ + GCONFTOOL = @GCONFTOOL@ + GCONF_CFLAGS = @GCONF_CFLAGS@ + GCONF_LIBS = @GCONF_LIBS@ +@@ -115,14 +110,35 @@ + INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ + INSTOBJEXT = @INSTOBJEXT@ + INTLLIBS = @INTLLIBS@ ++INTLTOOL_CAVES_RULE = @INTLTOOL_CAVES_RULE@ ++INTLTOOL_DESKTOP_RULE = @INTLTOOL_DESKTOP_RULE@ ++INTLTOOL_DIRECTORY_RULE = @INTLTOOL_DIRECTORY_RULE@ + INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ ++INTLTOOL_KBD_RULE = @INTLTOOL_KBD_RULE@ ++INTLTOOL_KEYS_RULE = @INTLTOOL_KEYS_RULE@ + INTLTOOL_MERGE = @INTLTOOL_MERGE@ ++INTLTOOL_OAF_RULE = @INTLTOOL_OAF_RULE@ + INTLTOOL_PERL = @INTLTOOL_PERL@ ++INTLTOOL_POLICY_RULE = @INTLTOOL_POLICY_RULE@ ++INTLTOOL_PONG_RULE = @INTLTOOL_PONG_RULE@ ++INTLTOOL_PROP_RULE = @INTLTOOL_PROP_RULE@ ++INTLTOOL_SCHEMAS_RULE = @INTLTOOL_SCHEMAS_RULE@ ++INTLTOOL_SERVER_RULE = @INTLTOOL_SERVER_RULE@ ++INTLTOOL_SERVICE_RULE = @INTLTOOL_SERVICE_RULE@ ++INTLTOOL_SHEET_RULE = @INTLTOOL_SHEET_RULE@ ++INTLTOOL_SOUNDLIST_RULE = @INTLTOOL_SOUNDLIST_RULE@ ++INTLTOOL_THEME_RULE = @INTLTOOL_THEME_RULE@ ++INTLTOOL_UI_RULE = @INTLTOOL_UI_RULE@ + INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ ++INTLTOOL_XAM_RULE = @INTLTOOL_XAM_RULE@ ++INTLTOOL_XML_NOMERGE_RULE = @INTLTOOL_XML_NOMERGE_RULE@ ++INTLTOOL_XML_RULE = @INTLTOOL_XML_RULE@ ++LD = @LD@ + LDFLAGS = @LDFLAGS@ + LIBOBJS = @LIBOBJS@ + LIBS = @LIBS@ + LIBTOOL = @LIBTOOL@ ++LIPO = @LIPO@ + LN_S = @LN_S@ + LTLIBOBJS = @LTLIBOBJS@ + MAINT = @MAINT@ +@@ -132,8 +148,11 @@ + MSGFMT = @MSGFMT@ + MSGFMT_OPTS = @MSGFMT_OPTS@ + MSGMERGE = @MSGMERGE@ ++NM = @NM@ + NMEDIT = @NMEDIT@ + OBJEXT = @OBJEXT@ ++OTOOL = @OTOOL@ ++OTOOL64 = @OTOOL64@ + PACKAGE = @PACKAGE@ + PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ + PACKAGE_NAME = @PACKAGE_NAME@ +@@ -181,8 +200,7 @@ + abs_top_builddir = @abs_top_builddir@ + abs_top_srcdir = @abs_top_srcdir@ + ac_ct_CC = @ac_ct_CC@ +-ac_ct_CXX = @ac_ct_CXX@ +-ac_ct_F77 = @ac_ct_F77@ ++ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ + am__include = @am__include@ + am__leading_dot = @am__leading_dot@ + am__quote = @am__quote@ +@@ -213,6 +231,7 @@ + libexecdir = @libexecdir@ + localedir = @localedir@ + localstatedir = @localstatedir@ ++lt_ECHO = @lt_ECHO@ + mandir = @mandir@ + mkdir_p = @mkdir_p@ + oldincludedir = @oldincludedir@ +@@ -225,7 +244,6 @@ + srcdir = @srcdir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ +-top_build_prefix = @top_build_prefix@ + top_builddir = @top_builddir@ + top_srcdir = @top_srcdir@ + man_MANS = \ +Index: gnome-session-2.25.90/egg/Makefile.in +=================================================================== +--- gnome-session-2.25.90.orig/egg/Makefile.in 2009-02-04 18:29:07.000000000 +0000 ++++ gnome-session-2.25.90/egg/Makefile.in 2009-02-04 18:30:00.000000000 +0000 +@@ -98,10 +98,6 @@ + COMPAT_LIBS = @COMPAT_LIBS@ + CPP = @CPP@ + CPPFLAGS = @CPPFLAGS@ +-CXX = @CXX@ +-CXXCPP = @CXXCPP@ +-CXXDEPMODE = @CXXDEPMODE@ +-CXXFLAGS = @CXXFLAGS@ + CYGPATH_W = @CYGPATH_W@ + DATADIRNAME = @DATADIRNAME@ + DBUS_GLIB_CFLAGS = @DBUS_GLIB_CFLAGS@ +@@ -111,7 +107,7 @@ + DISABLE_DEPRECATED = @DISABLE_DEPRECATED@ + DISABLE_DEPRECATED_CFLAGS = @DISABLE_DEPRECATED_CFLAGS@ + DSYMUTIL = @DSYMUTIL@ +-ECHO = @ECHO@ ++DUMPBIN = @DUMPBIN@ + ECHO_C = @ECHO_C@ + ECHO_N = @ECHO_N@ + ECHO_T = @ECHO_T@ +@@ -119,8 +115,7 @@ + EGG_SMCLIENT_LIBS = @EGG_SMCLIENT_LIBS@ + EGREP = @EGREP@ + EXEEXT = @EXEEXT@ +-F77 = @F77@ +-FFLAGS = @FFLAGS@ ++FGREP = @FGREP@ + GCONFTOOL = @GCONFTOOL@ + GCONF_CFLAGS = @GCONF_CFLAGS@ + GCONF_LIBS = @GCONF_LIBS@ +@@ -145,14 +140,35 @@ + INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ + INSTOBJEXT = @INSTOBJEXT@ + INTLLIBS = @INTLLIBS@ ++INTLTOOL_CAVES_RULE = @INTLTOOL_CAVES_RULE@ ++INTLTOOL_DESKTOP_RULE = @INTLTOOL_DESKTOP_RULE@ ++INTLTOOL_DIRECTORY_RULE = @INTLTOOL_DIRECTORY_RULE@ + INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ ++INTLTOOL_KBD_RULE = @INTLTOOL_KBD_RULE@ ++INTLTOOL_KEYS_RULE = @INTLTOOL_KEYS_RULE@ + INTLTOOL_MERGE = @INTLTOOL_MERGE@ ++INTLTOOL_OAF_RULE = @INTLTOOL_OAF_RULE@ + INTLTOOL_PERL = @INTLTOOL_PERL@ ++INTLTOOL_POLICY_RULE = @INTLTOOL_POLICY_RULE@ ++INTLTOOL_PONG_RULE = @INTLTOOL_PONG_RULE@ ++INTLTOOL_PROP_RULE = @INTLTOOL_PROP_RULE@ ++INTLTOOL_SCHEMAS_RULE = @INTLTOOL_SCHEMAS_RULE@ ++INTLTOOL_SERVER_RULE = @INTLTOOL_SERVER_RULE@ ++INTLTOOL_SERVICE_RULE = @INTLTOOL_SERVICE_RULE@ ++INTLTOOL_SHEET_RULE = @INTLTOOL_SHEET_RULE@ ++INTLTOOL_SOUNDLIST_RULE = @INTLTOOL_SOUNDLIST_RULE@ ++INTLTOOL_THEME_RULE = @INTLTOOL_THEME_RULE@ ++INTLTOOL_UI_RULE = @INTLTOOL_UI_RULE@ + INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ ++INTLTOOL_XAM_RULE = @INTLTOOL_XAM_RULE@ ++INTLTOOL_XML_NOMERGE_RULE = @INTLTOOL_XML_NOMERGE_RULE@ ++INTLTOOL_XML_RULE = @INTLTOOL_XML_RULE@ ++LD = @LD@ + LDFLAGS = @LDFLAGS@ + LIBOBJS = @LIBOBJS@ + LIBS = @LIBS@ + LIBTOOL = @LIBTOOL@ ++LIPO = @LIPO@ + LN_S = @LN_S@ + LTLIBOBJS = @LTLIBOBJS@ + MAINT = @MAINT@ +@@ -162,8 +178,11 @@ + MSGFMT = @MSGFMT@ + MSGFMT_OPTS = @MSGFMT_OPTS@ + MSGMERGE = @MSGMERGE@ ++NM = @NM@ + NMEDIT = @NMEDIT@ + OBJEXT = @OBJEXT@ ++OTOOL = @OTOOL@ ++OTOOL64 = @OTOOL64@ + PACKAGE = @PACKAGE@ + PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ + PACKAGE_NAME = @PACKAGE_NAME@ +@@ -211,8 +230,7 @@ + abs_top_builddir = @abs_top_builddir@ + abs_top_srcdir = @abs_top_srcdir@ + ac_ct_CC = @ac_ct_CC@ +-ac_ct_CXX = @ac_ct_CXX@ +-ac_ct_F77 = @ac_ct_F77@ ++ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ + am__include = @am__include@ + am__leading_dot = @am__leading_dot@ + am__quote = @am__quote@ +@@ -243,6 +261,7 @@ + libexecdir = @libexecdir@ + localedir = @localedir@ + localstatedir = @localstatedir@ ++lt_ECHO = @lt_ECHO@ + mandir = @mandir@ + mkdir_p = @mkdir_p@ + oldincludedir = @oldincludedir@ +@@ -255,7 +274,6 @@ + srcdir = @srcdir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ +-top_build_prefix = @top_build_prefix@ + top_builddir = @top_builddir@ + top_srcdir = @top_srcdir@ + platform_defines = -DEGG_SM_CLIENT_BACKEND_XSMP +Index: gnome-session-2.25.90/gnome-session/Makefile.in +=================================================================== +--- gnome-session-2.25.90.orig/gnome-session/Makefile.in 2009-02-04 18:29:15.000000000 +0000 ++++ gnome-session-2.25.90/gnome-session/Makefile.in 2009-02-04 18:30:00.000000000 +0000 +@@ -35,7 +35,7 @@ + host_triplet = @host@ + bin_PROGRAMS = gnome-session$(EXEEXT) + noinst_PROGRAMS = test-client-dbus$(EXEEXT) test-inhibit$(EXEEXT) \ +- $(am__EXEEXT_1) ++ test-logout$(EXEEXT) $(am__EXEEXT_1) + subdir = gnome-session + DIST_COMMON = README $(srcdir)/Makefile.am $(srcdir)/Makefile.in + ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +@@ -82,6 +82,12 @@ + test_inhibit_OBJECTS = $(am_test_inhibit_OBJECTS) + test_inhibit_DEPENDENCIES = $(am__DEPENDENCIES_1) \ + $(am__DEPENDENCIES_1) ++am_test_logout_OBJECTS = test-logout.$(OBJEXT) gdm.$(OBJEXT) \ ++ gsm-consolekit.$(OBJEXT) gsm-logout-dialog.$(OBJEXT) \ ++ gsm-power-manager.$(OBJEXT) $(am__objects_1) ++test_logout_OBJECTS = $(am_test_logout_OBJECTS) ++test_logout_DEPENDENCIES = $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) \ ++ $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) + DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) + depcomp = $(SHELL) $(top_srcdir)/depcomp + am__depfiles_maybe = depfiles +@@ -95,9 +101,11 @@ + --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \ + $(LDFLAGS) -o $@ + SOURCES = $(libgsmutil_la_SOURCES) $(gnome_session_SOURCES) \ +- $(test_client_dbus_SOURCES) $(test_inhibit_SOURCES) ++ $(test_client_dbus_SOURCES) $(test_inhibit_SOURCES) \ ++ $(test_logout_SOURCES) + DIST_SOURCES = $(libgsmutil_la_SOURCES) $(gnome_session_SOURCES) \ +- $(test_client_dbus_SOURCES) $(test_inhibit_SOURCES) ++ $(test_client_dbus_SOURCES) $(test_inhibit_SOURCES) \ ++ $(test_logout_SOURCES) + ETAGS = etags + CTAGS = ctags + DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +@@ -120,10 +128,6 @@ + COMPAT_LIBS = @COMPAT_LIBS@ + CPP = @CPP@ + CPPFLAGS = @CPPFLAGS@ +-CXX = @CXX@ +-CXXCPP = @CXXCPP@ +-CXXDEPMODE = @CXXDEPMODE@ +-CXXFLAGS = @CXXFLAGS@ + CYGPATH_W = @CYGPATH_W@ + DATADIRNAME = @DATADIRNAME@ + DBUS_GLIB_CFLAGS = @DBUS_GLIB_CFLAGS@ +@@ -133,7 +137,7 @@ + DISABLE_DEPRECATED = @DISABLE_DEPRECATED@ + DISABLE_DEPRECATED_CFLAGS = @DISABLE_DEPRECATED_CFLAGS@ + DSYMUTIL = @DSYMUTIL@ +-ECHO = @ECHO@ ++DUMPBIN = @DUMPBIN@ + ECHO_C = @ECHO_C@ + ECHO_N = @ECHO_N@ + ECHO_T = @ECHO_T@ +@@ -141,8 +145,7 @@ + EGG_SMCLIENT_LIBS = @EGG_SMCLIENT_LIBS@ + EGREP = @EGREP@ + EXEEXT = @EXEEXT@ +-F77 = @F77@ +-FFLAGS = @FFLAGS@ ++FGREP = @FGREP@ + GCONFTOOL = @GCONFTOOL@ + GCONF_CFLAGS = @GCONF_CFLAGS@ + GCONF_LIBS = @GCONF_LIBS@ +@@ -167,14 +170,35 @@ + INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ + INSTOBJEXT = @INSTOBJEXT@ + INTLLIBS = @INTLLIBS@ ++INTLTOOL_CAVES_RULE = @INTLTOOL_CAVES_RULE@ ++INTLTOOL_DESKTOP_RULE = @INTLTOOL_DESKTOP_RULE@ ++INTLTOOL_DIRECTORY_RULE = @INTLTOOL_DIRECTORY_RULE@ + INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ ++INTLTOOL_KBD_RULE = @INTLTOOL_KBD_RULE@ ++INTLTOOL_KEYS_RULE = @INTLTOOL_KEYS_RULE@ + INTLTOOL_MERGE = @INTLTOOL_MERGE@ ++INTLTOOL_OAF_RULE = @INTLTOOL_OAF_RULE@ + INTLTOOL_PERL = @INTLTOOL_PERL@ ++INTLTOOL_POLICY_RULE = @INTLTOOL_POLICY_RULE@ ++INTLTOOL_PONG_RULE = @INTLTOOL_PONG_RULE@ ++INTLTOOL_PROP_RULE = @INTLTOOL_PROP_RULE@ ++INTLTOOL_SCHEMAS_RULE = @INTLTOOL_SCHEMAS_RULE@ ++INTLTOOL_SERVER_RULE = @INTLTOOL_SERVER_RULE@ ++INTLTOOL_SERVICE_RULE = @INTLTOOL_SERVICE_RULE@ ++INTLTOOL_SHEET_RULE = @INTLTOOL_SHEET_RULE@ ++INTLTOOL_SOUNDLIST_RULE = @INTLTOOL_SOUNDLIST_RULE@ ++INTLTOOL_THEME_RULE = @INTLTOOL_THEME_RULE@ ++INTLTOOL_UI_RULE = @INTLTOOL_UI_RULE@ + INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ ++INTLTOOL_XAM_RULE = @INTLTOOL_XAM_RULE@ ++INTLTOOL_XML_NOMERGE_RULE = @INTLTOOL_XML_NOMERGE_RULE@ ++INTLTOOL_XML_RULE = @INTLTOOL_XML_RULE@ ++LD = @LD@ + LDFLAGS = @LDFLAGS@ + LIBOBJS = @LIBOBJS@ + LIBS = @LIBS@ + LIBTOOL = @LIBTOOL@ ++LIPO = @LIPO@ + LN_S = @LN_S@ + LTLIBOBJS = @LTLIBOBJS@ + MAINT = @MAINT@ +@@ -184,8 +208,11 @@ + MSGFMT = @MSGFMT@ + MSGFMT_OPTS = @MSGFMT_OPTS@ + MSGMERGE = @MSGMERGE@ ++NM = @NM@ + NMEDIT = @NMEDIT@ + OBJEXT = @OBJEXT@ ++OTOOL = @OTOOL@ ++OTOOL64 = @OTOOL64@ + PACKAGE = @PACKAGE@ + PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ + PACKAGE_NAME = @PACKAGE_NAME@ +@@ -233,8 +260,7 @@ + abs_top_builddir = @abs_top_builddir@ + abs_top_srcdir = @abs_top_srcdir@ + ac_ct_CC = @ac_ct_CC@ +-ac_ct_CXX = @ac_ct_CXX@ +-ac_ct_F77 = @ac_ct_F77@ ++ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ + am__include = @am__include@ + am__leading_dot = @am__leading_dot@ + am__quote = @am__quote@ +@@ -265,6 +291,7 @@ + libexecdir = @libexecdir@ + localedir = @localedir@ + localstatedir = @localstatedir@ ++lt_ECHO = @lt_ECHO@ + mandir = @mandir@ + mkdir_p = @mkdir_p@ + oldincludedir = @oldincludedir@ +@@ -277,7 +304,6 @@ + srcdir = @srcdir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ +-top_build_prefix = @top_build_prefix@ + top_builddir = @top_builddir@ + top_srcdir = @top_srcdir@ + NULL = +@@ -295,7 +321,7 @@ + -DDATA_DIR=\""$(datadir)/gnome-session"\" \ + -DDBUS_LAUNCH=\"dbus-launch\" \ + -DLIBEXECDIR=\"$(libexecdir)\" \ +- -DDATADIR=\""$(datadir)"\" \ ++ -DDATADIR=\""$(datadir)"\" \ + -DGLADEDIR=\""$(pkgdatadir)"\" \ + -DGCONF_SANITY_CHECK=\""$(GCONF_SANITY_CHECK)"\" \ + -DGCONFTOOL_CMD=\"$(GCONFTOOL)\" +@@ -316,6 +342,24 @@ + $(DBUS_GLIB_LIBS) \ + $(NULL) + ++test_logout_SOURCES = \ ++ test-logout.c \ ++ gdm.c \ ++ gdm.h \ ++ gsm-consolekit.c \ ++ gsm-consolekit.h \ ++ gsm-logout-dialog.c \ ++ gsm-logout-dialog.h \ ++ gsm-power-manager.c \ ++ gsm-power-manager.h \ ++ $(NULL) ++ ++test_logout_LDADD = \ ++ $(GNOME_SESSION_LIBS) \ ++ $(DBUS_GLIB_LIBS) \ ++ $(POLKIT_GNOME_LIBS) \ ++ $(NULL) ++ + gnome_session_LDADD = \ + libgsmutil.la \ + $(top_builddir)/egg/libeggdesktopfile.la \ +@@ -499,6 +543,9 @@ + test-inhibit$(EXEEXT): $(test_inhibit_OBJECTS) $(test_inhibit_DEPENDENCIES) + @rm -f test-inhibit$(EXEEXT) + $(LINK) $(test_inhibit_OBJECTS) $(test_inhibit_LDADD) $(LIBS) ++test-logout$(EXEEXT): $(test_logout_OBJECTS) $(test_logout_DEPENDENCIES) ++ @rm -f test-logout$(EXEEXT) ++ $(LINK) $(test_logout_OBJECTS) $(test_logout_LDADD) $(LIBS) + + mostlyclean-compile: + -rm -f *.$(OBJEXT) +@@ -531,6 +578,7 @@ + @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/main.Po@am__quote@ + @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/test-client-dbus.Po@am__quote@ + @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/test-inhibit.Po@am__quote@ ++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/test-logout.Po@am__quote@ + + .c.o: + @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +Index: gnome-session-2.25.90/ltmain.sh +=================================================================== +--- gnome-session-2.25.90.orig/ltmain.sh 2009-02-04 18:29:19.000000000 +0000 ++++ gnome-session-2.25.90/ltmain.sh 2009-02-04 18:29:51.000000000 +0000 +@@ -1,52 +1,83 @@ +-# ltmain.sh - Provide generalized library-building support services. +-# NOTE: Changing this file will not affect anything until you rerun configure. +-# +-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, +-# 2007, 2008 Free Software Foundation, Inc. +-# Originally by Gordon Matzigkeit , 1996 +-# +-# This program is free software; you can redistribute it and/or modify ++# Generated from ltmain.m4sh. ++ ++# ltmain.sh (GNU libtool) 2.2.4 ++# Written by Gordon Matzigkeit , 1996 ++ ++# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, 2007 2008 Free Software Foundation, Inc. ++# This is free software; see the source for copying conditions. There is NO ++# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. ++ ++# GNU Libtool is free software; you can redistribute it and/or modify + # it under the terms of the GNU General Public License as published by + # the Free Software Foundation; either version 2 of the License, or + # (at your option) any later version. + # +-# This program is distributed in the hope that it will be useful, but ++# As a special exception to the GNU General Public License, ++# if you distribute this file as part of a program or library that ++# is built using GNU Libtool, you may include this file under the ++# same distribution terms that you use for the rest of that program. ++# ++# GNU Libtool is distributed in the hope that it will be useful, but + # WITHOUT ANY WARRANTY; without even the implied warranty of + # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + # General Public License for more details. + # + # You should have received a copy of the GNU General Public License +-# along with this program; if not, write to the Free Software +-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. +-# +-# As a special exception to the GNU General Public License, if you +-# distribute this file as part of a program that contains a +-# configuration script generated by Autoconf, you may include it under +-# the same distribution terms that you use for the rest of that program. +- +-basename="s,^.*/,,g" +- +-# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh +-# is ksh but when the shell is invoked as "sh" and the current value of +-# the _XPG environment variable is not equal to 1 (one), the special +-# positional parameter $0, within a function call, is the name of the +-# function. +-progpath="$0" +- +-# The name of this program: +-progname=`echo "$progpath" | $SED $basename` +-modename="$progname" ++# along with GNU Libtool; see the file COPYING. If not, a copy ++# can be downloaded from http://www.gnu.org/licenses/gpl.html, ++# or obtained by writing to the Free Software Foundation, Inc., ++# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + +-# Global variables: +-EXIT_SUCCESS=0 +-EXIT_FAILURE=1 ++# Usage: $progname [OPTION]... [MODE-ARG]... ++# ++# Provide generalized library-building support services. ++# ++# --config show all configuration variables ++# --debug enable verbose shell tracing ++# -n, --dry-run display commands without modifying any files ++# --features display basic configuration information and exit ++# --mode=MODE use operation mode MODE ++# --preserve-dup-deps don't remove duplicate dependency libraries ++# --quiet, --silent don't print informational messages ++# --tag=TAG use configuration variables from tag TAG ++# -v, --verbose print informational messages (default) ++# --version print version information ++# -h, --help print short or long help message ++# ++# MODE must be one of the following: ++# ++# clean remove files from the build directory ++# compile compile a source file into a libtool object ++# execute automatically set library path, then run a program ++# finish complete the installation of libtool libraries ++# install install libraries or executables ++# link create a library or an executable ++# uninstall remove libraries from an installed directory ++# ++# MODE-ARGS vary depending on the MODE. ++# Try `$progname --help --mode=MODE' for a more detailed description of MODE. ++# ++# When reporting a bug, please describe a test case to reproduce it and ++# include the following information: ++# ++# host-triplet: $host ++# shell: $SHELL ++# compiler: $LTCC ++# compiler flags: $LTCFLAGS ++# linker: $LD (gnu? $with_gnu_ld) ++# $progname: (GNU libtool) 2.2.4 Debian-2.2.4-0ubuntu4 ++# automake: $automake_version ++# autoconf: $autoconf_version ++# ++# Report bugs to . + + PROGRAM=ltmain.sh + PACKAGE=libtool +-VERSION=1.5.26 +-TIMESTAMP=" (1.1220.2.492 2008/01/30 06:40:56)" ++VERSION="2.2.4 Debian-2.2.4-0ubuntu4" ++TIMESTAMP="" ++package_revision=1.2976 + +-# Be Bourne compatible (taken from Autoconf:_AS_BOURNE_COMPATIBLE). ++# Be Bourne compatible + if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: +@@ -60,104 +91,261 @@ + BIN_SH=xpg4; export BIN_SH # for Tru64 + DUALCASE=1; export DUALCASE # for MKS sh + +-# Check that we have a working $echo. +-if test "X$1" = X--no-reexec; then +- # Discard the --no-reexec flag, and continue. +- shift +-elif test "X$1" = X--fallback-echo; then +- # Avoid inline document here, it may be left over +- : +-elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then +- # Yippee, $echo works! +- : +-else +- # Restart under the correct shell, and then maybe $echo will work. +- exec $SHELL "$progpath" --no-reexec ${1+"$@"} +-fi +- +-if test "X$1" = X--fallback-echo; then +- # used as fallback echo +- shift +- cat <&2 +- $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 +- exit $EXIT_FAILURE +-fi ++dirname="s,/[^/]*$,," ++basename="s,^.*/,," + +-# Global variables. +-mode=$default_mode +-nonopt= +-prev= +-prevopt= +-run= +-show="$echo" +-show_help= +-execute_dlfiles= +-duplicate_deps=no +-preserve_args= +-lo2o="s/\\.lo\$/.${objext}/" +-o2lo="s/\\.${objext}\$/.lo/" +-extracted_archives= +-extracted_serial=0 ++# func_dirname_and_basename file append nondir_replacement ++# perform func_basename and func_dirname in a single function ++# call: ++# dirname: Compute the dirname of FILE. If nonempty, ++# add APPEND to the result, otherwise set result ++# to NONDIR_REPLACEMENT. ++# value returned in "$func_dirname_result" ++# basename: Compute filename of FILE. ++# value retuned in "$func_basename_result" ++# Implementation must be kept synchronized with func_dirname ++# and func_basename. For efficiency, we do not delegate to ++# those functions but instead duplicate the functionality here. ++func_dirname_and_basename () ++{ ++ # Extract subdirectory from the argument. ++ func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"` ++ if test "X$func_dirname_result" = "X${1}"; then ++ func_dirname_result="${3}" ++ else ++ func_dirname_result="$func_dirname_result${2}" ++ fi ++ func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"` ++} ++ ++# Generated shell functions inserted here. ++ ++# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh ++# is ksh but when the shell is invoked as "sh" and the current value of ++# the _XPG environment variable is not equal to 1 (one), the special ++# positional parameter $0, within a function call, is the name of the ++# function. ++progpath="$0" ++ ++# The name of this program: ++# In the unlikely event $progname began with a '-', it would play havoc with ++# func_echo (imagine progname=-n), so we prepend ./ in that case: ++func_dirname_and_basename "$progpath" ++progname=$func_basename_result ++case $progname in ++ -*) progname=./$progname ;; ++esac ++ ++# Make sure we have an absolute path for reexecution: ++case $progpath in ++ [\\/]*|[A-Za-z]:\\*) ;; ++ *[\\/]*) ++ progdir=$func_dirname_result ++ progdir=`cd "$progdir" && pwd` ++ progpath="$progdir/$progname" ++ ;; ++ *) ++ save_IFS="$IFS" ++ IFS=: ++ for progdir in $PATH; do ++ IFS="$save_IFS" ++ test -x "$progdir/$progname" && break ++ done ++ IFS="$save_IFS" ++ test -n "$progdir" || progdir=`pwd` ++ progpath="$progdir/$progname" ++ ;; ++esac ++ ++# Sed substitution that helps us do robust quoting. It backslashifies ++# metacharacters that are still active within double-quoted strings. ++Xsed="${SED}"' -e 1s/^X//' ++sed_quote_subst='s/\([`"$\\]\)/\\\1/g' ++ ++# Same as above, but do not quote variable references. ++double_quote_subst='s/\(["`\\]\)/\\\1/g' ++ ++# Re-`\' parameter expansions in output of double_quote_subst that were ++# `\'-ed in input to the same. If an odd number of `\' preceded a '$' ++# in input to double_quote_subst, that '$' was protected from expansion. ++# Since each input `\' is now two `\'s, look for any number of runs of ++# four `\'s followed by two `\'s and then a '$'. `\' that '$'. ++bs='\\' ++bs2='\\\\' ++bs4='\\\\\\\\' ++dollar='\$' ++sed_double_backslash="\ ++ s/$bs4/&\\ ++/g ++ s/^$bs2$dollar/$bs&/ ++ s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g ++ s/\n//g" ++ ++# Standard options: ++opt_dry_run=false ++opt_help=false ++opt_quiet=false ++opt_verbose=false ++opt_warning=: ++ ++# func_echo arg... ++# Echo program name prefixed message, along with the current mode ++# name if it has been set yet. ++func_echo () ++{ ++ $ECHO "$progname${mode+: }$mode: $*" ++} ++ ++# func_verbose arg... ++# Echo program name prefixed message in verbose mode only. ++func_verbose () ++{ ++ $opt_verbose && func_echo ${1+"$@"} ++ ++ # A bug in bash halts the script if the last line of a function ++ # fails when set -e is in force, so we need another command to ++ # work around that: ++ : ++} ++ ++# func_error arg... ++# Echo program name prefixed message to standard error. ++func_error () ++{ ++ $ECHO "$progname${mode+: }$mode: "${1+"$@"} 1>&2 ++} ++ ++# func_warning arg... ++# Echo program name prefixed warning message to standard error. ++func_warning () ++{ ++ $opt_warning && $ECHO "$progname${mode+: }$mode: warning: "${1+"$@"} 1>&2 ++ ++ # bash bug again: ++ : ++} ++ ++# func_fatal_error arg... ++# Echo program name prefixed message to standard error, and exit. ++func_fatal_error () ++{ ++ func_error ${1+"$@"} ++ exit $EXIT_FAILURE ++} ++ ++# func_fatal_help arg... ++# Echo program name prefixed message to standard error, followed by ++# a help hint, and exit. ++func_fatal_help () ++{ ++ func_error ${1+"$@"} ++ func_fatal_error "$help" ++} ++help="Try \`$progname --help' for more information." ## default ++ ++ ++# func_grep expression filename ++# Check whether EXPRESSION matches any line of FILENAME, without output. ++func_grep () ++{ ++ $GREP "$1" "$2" >/dev/null 2>&1 ++} ++ ++ ++# func_mkdir_p directory-path ++# Make sure the entire path to DIRECTORY-PATH is available. ++func_mkdir_p () ++{ ++ my_directory_path="$1" ++ my_dir_list= ++ ++ if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then ++ ++ # Protect directory names starting with `-' ++ case $my_directory_path in ++ -*) my_directory_path="./$my_directory_path" ;; ++ esac ++ ++ # While some portion of DIR does not yet exist... ++ while test ! -d "$my_directory_path"; do ++ # ...make a list in topmost first order. Use a colon delimited ++ # list incase some portion of path contains whitespace. ++ my_dir_list="$my_directory_path:$my_dir_list" ++ ++ # If the last portion added has no slash in it, the list is done ++ case $my_directory_path in */*) ;; *) break ;; esac ++ ++ # ...otherwise throw away the child directory and loop ++ my_directory_path=`$ECHO "X$my_directory_path" | $Xsed -e "$dirname"` ++ done ++ my_dir_list=`$ECHO "X$my_dir_list" | $Xsed -e 's,:*$,,'` ++ ++ save_mkdir_p_IFS="$IFS"; IFS=':' ++ for my_dir in $my_dir_list; do ++ IFS="$save_mkdir_p_IFS" ++ # mkdir can fail with a `File exist' error if two processes ++ # try to create one of the directories concurrently. Don't ++ # stop in that case! ++ $MKDIR "$my_dir" 2>/dev/null || : ++ done ++ IFS="$save_mkdir_p_IFS" ++ ++ # Bail out if we (or some other process) failed to create a directory. ++ test -d "$my_directory_path" || \ ++ func_fatal_error "Failed to create \`$1'" ++ fi ++} + +-##################################### +-# Shell function definitions: +-# This seems to be the best place for them + + # func_mktempdir [string] + # Make a temporary directory that won't clash with other running +@@ -167,7 +355,7 @@ + { + my_template="${TMPDIR-/tmp}/${1-$progname}" + +- if test "$run" = ":"; then ++ if test "$opt_dry_run" = ":"; then + # Return a directory name, but don't create it in dry-run mode + my_tmpdir="${my_template}-$$" + else +@@ -176,525 +364,785 @@ + my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null` + + if test ! -d "$my_tmpdir"; then +- # Failing that, at least try and use $RANDOM to avoid a race +- my_tmpdir="${my_template}-${RANDOM-0}$$" ++ # Failing that, at least try and use $RANDOM to avoid a race ++ my_tmpdir="${my_template}-${RANDOM-0}$$" + +- save_mktempdir_umask=`umask` +- umask 0077 +- $mkdir "$my_tmpdir" +- umask $save_mktempdir_umask ++ save_mktempdir_umask=`umask` ++ umask 0077 ++ $MKDIR "$my_tmpdir" ++ umask $save_mktempdir_umask + fi + + # If we're not in dry-run mode, bomb out on failure +- test -d "$my_tmpdir" || { +- $echo "cannot create temporary directory \`$my_tmpdir'" 1>&2 +- exit $EXIT_FAILURE +- } ++ test -d "$my_tmpdir" || \ ++ func_fatal_error "cannot create temporary directory \`$my_tmpdir'" + fi + +- $echo "X$my_tmpdir" | $Xsed ++ $ECHO "X$my_tmpdir" | $Xsed + } + + +-# func_win32_libid arg +-# return the library type of file 'arg' +-# +-# Need a lot of goo to handle *both* DLLs and import libs +-# Has to be a shell function in order to 'eat' the argument +-# that is supplied when $file_magic_command is called. +-func_win32_libid () ++# func_quote_for_eval arg ++# Aesthetically quote ARG to be evaled later. ++# This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT ++# is double-quoted, suitable for a subsequent eval, whereas ++# FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters ++# which are still active within double quotes backslashified. ++func_quote_for_eval () + { +- win32_libid_type="unknown" +- win32_fileres=`file -L $1 2>/dev/null` +- case $win32_fileres in +- *ar\ archive\ import\ library*) # definitely import +- win32_libid_type="x86 archive import" +- ;; +- *ar\ archive*) # could be an import, or static +- if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | \ +- $EGREP -e 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then +- win32_nmres=`eval $NM -f posix -A $1 | \ +- $SED -n -e '1,100{ +- / I /{ +- s,.*,import, +- p +- q +- } +- }'` +- case $win32_nmres in +- import*) win32_libid_type="x86 archive import";; +- *) win32_libid_type="x86 archive static";; +- esac +- fi +- ;; +- *DLL*) +- win32_libid_type="x86 DLL" +- ;; +- *executable*) # but shell scripts are "executable" too... +- case $win32_fileres in +- *MS\ Windows\ PE\ Intel*) +- win32_libid_type="x86 DLL" +- ;; ++ case $1 in ++ *[\\\`\"\$]*) ++ func_quote_for_eval_unquoted_result=`$ECHO "X$1" | $Xsed -e "$sed_quote_subst"` ;; ++ *) ++ func_quote_for_eval_unquoted_result="$1" ;; ++ esac ++ ++ case $func_quote_for_eval_unquoted_result in ++ # Double-quote args containing shell metacharacters to delay ++ # word splitting, command substitution and and variable ++ # expansion for a subsequent eval. ++ # Many Bourne shells cannot handle close brackets correctly ++ # in scan sets, so we specify it separately. ++ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") ++ func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\"" ++ ;; ++ *) ++ func_quote_for_eval_result="$func_quote_for_eval_unquoted_result" + esac +- ;; +- esac +- $echo $win32_libid_type + } + + +-# func_infer_tag arg +-# Infer tagged configuration to use if any are available and +-# if one wasn't chosen via the "--tag" command line option. +-# Only attempt this if the compiler in the base compile +-# command doesn't match the default compiler. +-# arg is usually of the form 'gcc ...' +-func_infer_tag () ++# func_quote_for_expand arg ++# Aesthetically quote ARG to be evaled later; same as above, ++# but do not quote variable references. ++func_quote_for_expand () + { +- if test -n "$available_tags" && test -z "$tagname"; then +- CC_quoted= +- for arg in $CC; do +- case $arg in +- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") +- arg="\"$arg\"" +- ;; +- esac +- CC_quoted="$CC_quoted $arg" +- done +- case $@ in +- # Blanks in the command may have been stripped by the calling shell, +- # but not from the CC environment variable when configure was run. +- " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*) ;; +- # Blanks at the start of $base_compile will cause this to fail +- # if we don't check for them as well. ++ case $1 in ++ *[\\\`\"]*) ++ my_arg=`$ECHO "X$1" | $Xsed \ ++ -e "$double_quote_subst" -e "$sed_double_backslash"` ;; + *) +- for z in $available_tags; do +- if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then +- # Evaluate the configuration. +- eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`" +- CC_quoted= +- for arg in $CC; do +- # Double-quote args containing other shell metacharacters. +- case $arg in +- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") +- arg="\"$arg\"" +- ;; +- esac +- CC_quoted="$CC_quoted $arg" +- done +- case "$@ " in +- " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*) +- # The compiler in the base compile command matches +- # the one in the tagged configuration. +- # Assume this is the tagged configuration we want. +- tagname=$z +- break +- ;; +- esac +- fi +- done +- # If $tagname still isn't set, then no tagged configuration +- # was found and let the user know that the "--tag" command +- # line option must be used. +- if test -z "$tagname"; then +- $echo "$modename: unable to infer tagged configuration" +- $echo "$modename: specify a tag with \`--tag'" 1>&2 +- exit $EXIT_FAILURE +-# else +-# $echo "$modename: using $tagname tagged configuration" +- fi +- ;; +- esac +- fi ++ my_arg="$1" ;; ++ esac ++ ++ case $my_arg in ++ # Double-quote args containing shell metacharacters to delay ++ # word splitting and command substitution for a subsequent eval. ++ # Many Bourne shells cannot handle close brackets correctly ++ # in scan sets, so we specify it separately. ++ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") ++ my_arg="\"$my_arg\"" ++ ;; ++ esac ++ ++ func_quote_for_expand_result="$my_arg" + } + + +-# func_extract_an_archive dir oldlib +-func_extract_an_archive () ++# func_show_eval cmd [fail_exp] ++# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is ++# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP ++# is given, then evaluate it. ++func_show_eval () + { +- f_ex_an_ar_dir="$1"; shift +- f_ex_an_ar_oldlib="$1" ++ my_cmd="$1" ++ my_fail_exp="${2-:}" + +- $show "(cd $f_ex_an_ar_dir && $AR x $f_ex_an_ar_oldlib)" +- $run eval "(cd \$f_ex_an_ar_dir && $AR x \$f_ex_an_ar_oldlib)" || exit $? +- if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then +- : +- else +- $echo "$modename: ERROR: object name conflicts: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" 1>&2 +- exit $EXIT_FAILURE ++ ${opt_silent-false} || { ++ func_quote_for_expand "$my_cmd" ++ eval "func_echo $func_quote_for_expand_result" ++ } ++ ++ if ${opt_dry_run-false}; then :; else ++ eval "$my_cmd" ++ my_status=$? ++ if test "$my_status" -eq 0; then :; else ++ eval "(exit $my_status); $my_fail_exp" ++ fi + fi + } + +-# func_extract_archives gentop oldlib ... +-func_extract_archives () ++ ++# func_show_eval_locale cmd [fail_exp] ++# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is ++# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP ++# is given, then evaluate it. Use the saved locale for evaluation. ++func_show_eval_locale () + { +- my_gentop="$1"; shift +- my_oldlibs=${1+"$@"} +- my_oldobjs="" +- my_xlib="" +- my_xabs="" +- my_xdir="" +- my_status="" ++ my_cmd="$1" ++ my_fail_exp="${2-:}" ++ ++ ${opt_silent-false} || { ++ func_quote_for_expand "$my_cmd" ++ eval "func_echo $func_quote_for_expand_result" ++ } + +- $show "${rm}r $my_gentop" +- $run ${rm}r "$my_gentop" +- $show "$mkdir $my_gentop" +- $run $mkdir "$my_gentop" +- my_status=$? +- if test "$my_status" -ne 0 && test ! -d "$my_gentop"; then +- exit $my_status ++ if ${opt_dry_run-false}; then :; else ++ eval "$lt_user_locale ++ $my_cmd" ++ my_status=$? ++ eval "$lt_safe_locale" ++ if test "$my_status" -eq 0; then :; else ++ eval "(exit $my_status); $my_fail_exp" ++ fi + fi ++} + +- for my_xlib in $my_oldlibs; do +- # Extract the objects. +- case $my_xlib in +- [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;; +- *) my_xabs=`pwd`"/$my_xlib" ;; +- esac +- my_xlib=`$echo "X$my_xlib" | $Xsed -e 's%^.*/%%'` +- my_xlib_u=$my_xlib +- while :; do +- case " $extracted_archives " in +- *" $my_xlib_u "*) +- extracted_serial=`expr $extracted_serial + 1` +- my_xlib_u=lt$extracted_serial-$my_xlib ;; +- *) break ;; +- esac +- done +- extracted_archives="$extracted_archives $my_xlib_u" +- my_xdir="$my_gentop/$my_xlib_u" + +- $show "${rm}r $my_xdir" +- $run ${rm}r "$my_xdir" +- $show "$mkdir $my_xdir" +- $run $mkdir "$my_xdir" +- exit_status=$? +- if test "$exit_status" -ne 0 && test ! -d "$my_xdir"; then +- exit $exit_status +- fi +- case $host in +- *-darwin*) +- $show "Extracting $my_xabs" +- # Do not bother doing anything if just a dry run +- if test -z "$run"; then +- darwin_orig_dir=`pwd` +- cd $my_xdir || exit $? +- darwin_archive=$my_xabs +- darwin_curdir=`pwd` +- darwin_base_archive=`$echo "X$darwin_archive" | $Xsed -e 's%^.*/%%'` +- darwin_arches=`lipo -info "$darwin_archive" 2>/dev/null | $EGREP Architectures 2>/dev/null` +- if test -n "$darwin_arches"; then +- darwin_arches=`echo "$darwin_arches" | $SED -e 's/.*are://'` +- darwin_arch= +- $show "$darwin_base_archive has multiple architectures $darwin_arches" +- for darwin_arch in $darwin_arches ; do +- mkdir -p "unfat-$$/${darwin_base_archive}-${darwin_arch}" +- lipo -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}" +- cd "unfat-$$/${darwin_base_archive}-${darwin_arch}" +- func_extract_an_archive "`pwd`" "${darwin_base_archive}" +- cd "$darwin_curdir" +- $rm "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" +- done # $darwin_arches +- ## Okay now we have a bunch of thin objects, gotta fatten them up :) +- darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print| xargs basename | sort -u | $NL2SP` +- darwin_file= +- darwin_files= +- for darwin_file in $darwin_filelist; do +- darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP` +- lipo -create -output "$darwin_file" $darwin_files +- done # $darwin_filelist +- ${rm}r unfat-$$ +- cd "$darwin_orig_dir" +- else +- cd "$darwin_orig_dir" +- func_extract_an_archive "$my_xdir" "$my_xabs" +- fi # $darwin_arches +- fi # $run +- ;; +- *) +- func_extract_an_archive "$my_xdir" "$my_xabs" +- ;; +- esac +- my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP` +- done +- func_extract_archives_result="$my_oldobjs" ++ ++ ++ ++# func_version ++# Echo version message to standard output and exit. ++func_version () ++{ ++ $SED -n '/^# '$PROGRAM' (GNU /,/# warranty; / { ++ s/^# // ++ s/^# *$// ++ s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/ ++ p ++ }' < "$progpath" ++ exit $? ++} ++ ++# func_usage ++# Echo short help message to standard output and exit. ++func_usage () ++{ ++ $SED -n '/^# Usage:/,/# -h/ { ++ s/^# // ++ s/^# *$// ++ s/\$progname/'$progname'/ ++ p ++ }' < "$progpath" ++ $ECHO ++ $ECHO "run \`$progname --help | more' for full usage" ++ exit $? ++} ++ ++# func_help ++# Echo long help message to standard output and exit. ++func_help () ++{ ++ $SED -n '/^# Usage:/,/# Report bugs to/ { ++ s/^# // ++ s/^# *$// ++ s*\$progname*'$progname'* ++ s*\$host*'"$host"'* ++ s*\$SHELL*'"$SHELL"'* ++ s*\$LTCC*'"$LTCC"'* ++ s*\$LTCFLAGS*'"$LTCFLAGS"'* ++ s*\$LD*'"$LD"'* ++ s/\$with_gnu_ld/'"$with_gnu_ld"'/ ++ s/\$automake_version/'"`(automake --version) 2>/dev/null |$SED 1q`"'/ ++ s/\$autoconf_version/'"`(autoconf --version) 2>/dev/null |$SED 1q`"'/ ++ p ++ }' < "$progpath" ++ exit $? ++} ++ ++# func_missing_arg argname ++# Echo program name prefixed message to standard error and set global ++# exit_cmd. ++func_missing_arg () ++{ ++ func_error "missing argument for $1" ++ exit_cmd=exit + } +-# End of Shell function definitions +-##################################### + +-# Darwin sucks +-eval std_shrext=\"$shrext_cmds\" ++exit_cmd=: + +-disable_libs=no + +-# Parse our command line options once, thoroughly. +-while test "$#" -gt 0 +-do +- arg="$1" ++ ++ ++ ++# Check that we have a working $ECHO. ++if test "X$1" = X--no-reexec; then ++ # Discard the --no-reexec flag, and continue. + shift ++elif test "X$1" = X--fallback-echo; then ++ # Avoid inline document here, it may be left over ++ : ++elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t'; then ++ # Yippee, $ECHO works! ++ : ++else ++ # Restart under the correct shell, and then maybe $ECHO will work. ++ exec $SHELL "$progpath" --no-reexec ${1+"$@"} ++fi + +- case $arg in +- -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;; +- *) optarg= ;; +- esac ++if test "X$1" = X--fallback-echo; then ++ # used as fallback echo ++ shift ++ cat <&2 +- exit $EXIT_FAILURE +- ;; +- esac ++magic="%%%MAGIC variable%%%" ++magic_exe="%%%MAGIC EXE variable%%%" + +- case $tagname in +- CC) +- # Don't test for the "default" C tag, as we know, it's there, but +- # not specially marked. +- ;; +- *) +- if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$progpath" > /dev/null; then +- taglist="$taglist $tagname" +- # Evaluate the configuration. +- eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$tagname'$/,/^# ### END LIBTOOL TAG CONFIG: '$tagname'$/p' < $progpath`" +- else +- $echo "$progname: ignoring unknown tag $tagname" 1>&2 +- fi +- ;; +- esac +- ;; +- *) +- eval "$prev=\$arg" +- ;; +- esac ++# Global variables. ++# $mode is unset ++nonopt= ++execute_dlfiles= ++preserve_args= ++lo2o="s/\\.lo\$/.${objext}/" ++o2lo="s/\\.${objext}\$/.lo/" ++extracted_archives= ++extracted_serial=0 + +- prev= +- prevopt= +- continue +- fi ++opt_dry_run=false ++opt_duplicate_deps=false ++opt_silent=false ++opt_debug=: + +- # Have we seen a non-optional argument yet? +- case $arg in +- --help) +- show_help=yes +- ;; ++# If this variable is set in any of the actions, the command in it ++# will be execed at the end. This prevents here-documents from being ++# left over by shells. ++exec_cmd= + +- --version) +- echo "\ +-$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP +- +-Copyright (C) 2008 Free Software Foundation, Inc. +-This is free software; see the source for copying conditions. There is NO +-warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." +- exit $? +- ;; ++# func_fatal_configuration arg... ++# Echo program name prefixed message to standard error, followed by ++# a configuration failure hint, and exit. ++func_fatal_configuration () ++{ ++ func_error ${1+"$@"} ++ func_error "See the $PACKAGE documentation for more information." ++ func_fatal_error "Fatal configuration error." ++} ++ ++ ++# func_config ++# Display the configuration for all the tags in this script. ++func_config () ++{ ++ re_begincf='^# ### BEGIN LIBTOOL' ++ re_endcf='^# ### END LIBTOOL' ++ ++ # Default configuration. ++ $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath" + +- --config) +- ${SED} -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $progpath + # Now print the configurations for the tags. + for tagname in $taglist; do +- ${SED} -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END LIBTOOL TAG CONFIG: $tagname$/p" < "$progpath" ++ $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath" + done +- exit $? +- ;; +- +- --debug) +- $echo "$progname: enabling shell trace mode" +- set -x +- preserve_args="$preserve_args $arg" +- ;; + +- --dry-run | -n) +- run=: +- ;; ++ exit $? ++} + +- --features) +- $echo "host: $host" ++# func_features ++# Display the features supported by this script. ++func_features () ++{ ++ $ECHO "host: $host" + if test "$build_libtool_libs" = yes; then +- $echo "enable shared libraries" ++ $ECHO "enable shared libraries" + else +- $echo "disable shared libraries" ++ $ECHO "disable shared libraries" + fi + if test "$build_old_libs" = yes; then +- $echo "enable static libraries" ++ $ECHO "enable static libraries" + else +- $echo "disable static libraries" ++ $ECHO "disable static libraries" + fi ++ + exit $? +- ;; ++} + +- --finish) mode="finish" ;; ++# func_enable_tag tagname ++# Verify that TAGNAME is valid, and either flag an error and exit, or ++# enable the TAGNAME tag. We also add TAGNAME to the global $taglist ++# variable here. ++func_enable_tag () ++{ ++ # Global variable: ++ tagname="$1" ++ ++ re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$" ++ re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$" ++ sed_extractcf="/$re_begincf/,/$re_endcf/p" ++ ++ # Validate tagname. ++ case $tagname in ++ *[!-_A-Za-z0-9,/]*) ++ func_fatal_error "invalid tag name: $tagname" ++ ;; ++ esac + +- --mode) prevopt="--mode" prev=mode ;; +- --mode=*) mode="$optarg" ;; ++ # Don't test for the "default" C tag, as we know it's ++ # there but not specially marked. ++ case $tagname in ++ CC) ;; ++ *) ++ if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then ++ taglist="$taglist $tagname" + +- --preserve-dup-deps) duplicate_deps="yes" ;; ++ # Evaluate the configuration. Be careful to quote the path ++ # and the sed script, to avoid splitting on whitespace, but ++ # also don't use non-portable quotes within backquotes within ++ # quotes we have to do it in 2 steps: ++ extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"` ++ eval "$extractedcf" ++ else ++ func_error "ignoring unknown tag $tagname" ++ fi ++ ;; ++ esac ++} + +- --quiet | --silent) +- show=: +- preserve_args="$preserve_args $arg" +- ;; ++# Parse options once, thoroughly. This comes as soon as possible in ++# the script to make things like `libtool --version' happen quickly. ++{ + +- --tag) +- prevopt="--tag" +- prev=tag +- preserve_args="$preserve_args --tag" ++ # Shorthand for --mode=foo, only valid as the first argument ++ case $1 in ++ clean|clea|cle|cl) ++ shift; set dummy --mode clean ${1+"$@"}; shift + ;; +- --tag=*) +- set tag "$optarg" ${1+"$@"} +- shift +- prev=tag +- preserve_args="$preserve_args --tag" ++ compile|compil|compi|comp|com|co|c) ++ shift; set dummy --mode compile ${1+"$@"}; shift + ;; +- +- -dlopen) +- prevopt="-dlopen" +- prev=execute_dlfiles ++ execute|execut|execu|exec|exe|ex|e) ++ shift; set dummy --mode execute ${1+"$@"}; shift + ;; +- +- -*) +- $echo "$modename: unrecognized option \`$arg'" 1>&2 +- $echo "$help" 1>&2 +- exit $EXIT_FAILURE ++ finish|finis|fini|fin|fi|f) ++ shift; set dummy --mode finish ${1+"$@"}; shift + ;; +- +- *) +- nonopt="$arg" +- break ++ install|instal|insta|inst|ins|in|i) ++ shift; set dummy --mode install ${1+"$@"}; shift ++ ;; ++ link|lin|li|l) ++ shift; set dummy --mode link ${1+"$@"}; shift ++ ;; ++ uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u) ++ shift; set dummy --mode uninstall ${1+"$@"}; shift + ;; + esac +-done + +-if test -n "$prevopt"; then +- $echo "$modename: option \`$prevopt' requires an argument" 1>&2 +- $echo "$help" 1>&2 +- exit $EXIT_FAILURE +-fi ++ # Parse non-mode specific arguments: ++ while test "$#" -gt 0; do ++ opt="$1" ++ shift + +-case $disable_libs in +-no) +- ;; +-shared) +- build_libtool_libs=no +- build_old_libs=yes +- ;; +-static) +- build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac` +- ;; +-esac ++ case $opt in ++ --config) func_config ;; + +-# If this variable is set in any of the actions, the command in it +-# will be execed at the end. This prevents here-documents from being +-# left over by shells. +-exec_cmd= ++ --debug) preserve_args="$preserve_args $opt" ++ func_echo "enabling shell trace mode" ++ opt_debug='set -x' ++ $opt_debug ++ ;; + +-if test -z "$show_help"; then ++ -dlopen) test "$#" -eq 0 && func_missing_arg "$opt" && break ++ execute_dlfiles="$execute_dlfiles $1" ++ shift ++ ;; + +- # Infer the operation mode. +- if test -z "$mode"; then +- $echo "*** Warning: inferring the mode of operation is deprecated." 1>&2 +- $echo "*** Future versions of Libtool will require --mode=MODE be specified." 1>&2 +- case $nonopt in +- *cc | cc* | *++ | gcc* | *-gcc* | g++* | xlc*) +- mode=link +- for arg +- do +- case $arg in +- -c) +- mode=compile +- break +- ;; +- esac +- done +- ;; +- *db | *dbx | *strace | *truss) +- mode=execute +- ;; +- *install*|cp|mv) +- mode=install +- ;; +- *rm) +- mode=uninstall ++ --dry-run | -n) opt_dry_run=: ;; ++ --features) func_features ;; ++ --finish) mode="finish" ;; ++ ++ --mode) test "$#" -eq 0 && func_missing_arg "$opt" && break ++ case $1 in ++ # Valid mode arguments: ++ clean) ;; ++ compile) ;; ++ execute) ;; ++ finish) ;; ++ install) ;; ++ link) ;; ++ relink) ;; ++ uninstall) ;; ++ ++ # Catch anything else as an error ++ *) func_error "invalid argument for $opt" ++ exit_cmd=exit ++ break ++ ;; ++ esac ++ ++ mode="$1" ++ shift ++ ;; ++ ++ --preserve-dup-deps) ++ opt_duplicate_deps=: ;; ++ ++ --quiet|--silent) preserve_args="$preserve_args $opt" ++ opt_silent=: ++ ;; ++ ++ --verbose| -v) preserve_args="$preserve_args $opt" ++ opt_silent=false ++ ;; ++ ++ --tag) test "$#" -eq 0 && func_missing_arg "$opt" && break ++ preserve_args="$preserve_args $opt $1" ++ func_enable_tag "$1" # tagname is set here ++ shift ++ ;; ++ ++ # Separate optargs to long options: ++ -dlopen=*|--mode=*|--tag=*) ++ func_opt_split "$opt" ++ set dummy "$func_opt_split_opt" "$func_opt_split_arg" ${1+"$@"} ++ shift ++ ;; ++ ++ -\?|-h) func_usage ;; ++ --help) opt_help=: ;; ++ --version) func_version ;; ++ ++ -*) func_fatal_help "unrecognized option \`$opt'" ;; ++ ++ *) nonopt="$opt" ++ break ++ ;; ++ esac ++ done ++ ++ ++ case $host in ++ *cygwin* | *mingw* | *pw32*) ++ # don't eliminate duplications in $postdeps and $predeps ++ opt_duplicate_compiler_generated_deps=: + ;; + *) +- # If we have no mode, but dlfiles were specified, then do execute mode. +- test -n "$execute_dlfiles" && mode=execute ++ opt_duplicate_compiler_generated_deps=$opt_duplicate_deps ++ ;; ++ esac + +- # Just use the default operation mode. +- if test -z "$mode"; then +- if test -n "$nonopt"; then +- $echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2 +- else +- $echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2 +- fi ++ # Having warned about all mis-specified options, bail out if ++ # anything was wrong. ++ $exit_cmd $EXIT_FAILURE ++} ++ ++# func_check_version_match ++# Ensure that we are using m4 macros, and libtool script from the same ++# release of libtool. ++func_check_version_match () ++{ ++ if test "$package_revision" != "$macro_revision"; then ++ if test "$VERSION" != "$macro_version"; then ++ if test -z "$macro_version"; then ++ cat >&2 <<_LT_EOF ++$progname: Version mismatch error. This is $PACKAGE $VERSION, but the ++$progname: definition of this LT_INIT comes from an older release. ++$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION ++$progname: and run autoconf again. ++_LT_EOF ++ else ++ cat >&2 <<_LT_EOF ++$progname: Version mismatch error. This is $PACKAGE $VERSION, but the ++$progname: definition of this LT_INIT comes from $PACKAGE $macro_version. ++$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION ++$progname: and run autoconf again. ++_LT_EOF + fi +- ;; +- esac ++ else ++ cat >&2 <<_LT_EOF ++$progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision, ++$progname: but the definition of this LT_INIT comes from revision $macro_revision. ++$progname: You should recreate aclocal.m4 with macros from revision $package_revision ++$progname: of $PACKAGE $VERSION and run autoconf again. ++_LT_EOF ++ fi ++ ++ exit $EXIT_MISMATCH ++ fi ++} ++ ++ ++## ----------- ## ++## Main. ## ++## ----------- ## ++ ++$opt_help || { ++ # Sanity checks first: ++ func_check_version_match ++ ++ if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then ++ func_fatal_configuration "not configured to build any kind of library" + fi + ++ test -z "$mode" && func_fatal_error "error: you must specify a MODE." ++ ++ ++ # Darwin sucks ++ eval std_shrext=\"$shrext_cmds\" ++ ++ + # Only execute mode is allowed to have -dlopen flags. + if test -n "$execute_dlfiles" && test "$mode" != execute; then +- $echo "$modename: unrecognized option \`-dlopen'" 1>&2 +- $echo "$help" 1>&2 ++ func_error "unrecognized option \`-dlopen'" ++ $ECHO "$help" 1>&2 + exit $EXIT_FAILURE + fi + + # Change the help message to a mode-specific one. + generic_help="$help" +- help="Try \`$modename --help --mode=$mode' for more information." ++ help="Try \`$progname --help --mode=$mode' for more information." ++} + +- # These modes are in order of execution frequency so that they run quickly. +- case $mode in +- # libtool compile mode +- compile) +- modename="$modename: compile" +- # Get the compilation command and the source file. +- base_compile= +- srcfile="$nonopt" # always keep a non-empty value in "srcfile" +- suppress_opt=yes +- suppress_output= +- arg_mode=normal +- libobj= +- later= + +- for arg +- do +- case $arg_mode in +- arg ) +- # do not "continue". Instead, add this to base_compile +- lastarg="$arg" +- arg_mode=normal +- ;; ++# func_lalib_p file ++# True iff FILE is a libtool `.la' library or `.lo' object file. ++# This function is only a basic sanity check; it will hardly flush out ++# determined imposters. ++func_lalib_p () ++{ ++ $SED -e 4q "$1" 2>/dev/null \ ++ | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1 ++} + +- target ) +- libobj="$arg" +- arg_mode=normal +- continue +- ;; ++# func_lalib_unsafe_p file ++# True iff FILE is a libtool `.la' library or `.lo' object file. ++# This function implements the same check as func_lalib_p without ++# resorting to external programs. To this end, it redirects stdin and ++# closes it afterwards, without saving the original file descriptor. ++# As a safety measure, use it only where a negative result would be ++# fatal anyway. Works if `file' does not exist. ++func_lalib_unsafe_p () ++{ ++ lalib_p=no ++ if test -r "$1" && exec 5<&0 <"$1"; then ++ for lalib_p_l in 1 2 3 4 ++ do ++ read lalib_p_line ++ case "$lalib_p_line" in ++ \#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;; ++ esac ++ done ++ exec 0<&5 5<&- ++ fi ++ test "$lalib_p" = yes ++} + +- normal ) +- # Accept any command-line options. +- case $arg in +- -o) +- if test -n "$libobj" ; then +- $echo "$modename: you cannot specify \`-o' more than once" 1>&2 +- exit $EXIT_FAILURE +- fi +- arg_mode=target +- continue +- ;; ++# func_ltwrapper_script_p file ++# True iff FILE is a libtool wrapper script ++# This function is only a basic sanity check; it will hardly flush out ++# determined imposters. ++func_ltwrapper_script_p () ++{ ++ func_lalib_p "$1" ++} + +- -static | -prefer-pic | -prefer-non-pic) +- later="$later $arg" +- continue ++# func_ltwrapper_executable_p file ++# True iff FILE is a libtool wrapper executable ++# This function is only a basic sanity check; it will hardly flush out ++# determined imposters. ++func_ltwrapper_executable_p () ++{ ++ func_ltwrapper_exec_suffix= ++ case $1 in ++ *.exe) ;; ++ *) func_ltwrapper_exec_suffix=.exe ;; ++ esac ++ $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1 ++} ++ ++# func_ltwrapper_scriptname file ++# Assumes file is an ltwrapper_executable ++# uses $file to determine the appropriate filename for a ++# temporary ltwrapper_script. ++func_ltwrapper_scriptname () ++{ ++ func_ltwrapper_scriptname_result="" ++ if func_ltwrapper_executable_p "$1"; then ++ func_dirname_and_basename "$1" "" "." ++ func_stripname '' '.exe' "$func_basename_result" ++ func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper" ++ fi ++} ++ ++# func_ltwrapper_p file ++# True iff FILE is a libtool wrapper script or wrapper executable ++# This function is only a basic sanity check; it will hardly flush out ++# determined imposters. ++func_ltwrapper_p () ++{ ++ func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1" ++} ++ ++ ++# func_execute_cmds commands fail_cmd ++# Execute tilde-delimited COMMANDS. ++# If FAIL_CMD is given, eval that upon failure. ++# FAIL_CMD may read-access the current command in variable CMD! ++func_execute_cmds () ++{ ++ $opt_debug ++ save_ifs=$IFS; IFS='~' ++ for cmd in $1; do ++ IFS=$save_ifs ++ eval cmd=\"$cmd\" ++ func_show_eval "$cmd" "${2-:}" ++ done ++ IFS=$save_ifs ++} ++ ++ ++# func_source file ++# Source FILE, adding directory component if necessary. ++# Note that it is not necessary on cygwin/mingw to append a dot to ++# FILE even if both FILE and FILE.exe exist: automatic-append-.exe ++# behavior happens only for exec(3), not for open(2)! Also, sourcing ++# `FILE.' does not work on cygwin managed mounts. ++func_source () ++{ ++ $opt_debug ++ case $1 in ++ */* | *\\*) . "$1" ;; ++ *) . "./$1" ;; ++ esac ++} ++ ++ ++# func_infer_tag arg ++# Infer tagged configuration to use if any are available and ++# if one wasn't chosen via the "--tag" command line option. ++# Only attempt this if the compiler in the base compile ++# command doesn't match the default compiler. ++# arg is usually of the form 'gcc ...' ++func_infer_tag () ++{ ++ $opt_debug ++ if test -n "$available_tags" && test -z "$tagname"; then ++ CC_quoted= ++ for arg in $CC; do ++ func_quote_for_eval "$arg" ++ CC_quoted="$CC_quoted $func_quote_for_eval_result" ++ done ++ case $@ in ++ # Blanks in the command may have been stripped by the calling shell, ++ # but not from the CC environment variable when configure was run. ++ " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*) ;; ++ # Blanks at the start of $base_compile will cause this to fail ++ # if we don't check for them as well. ++ *) ++ for z in $available_tags; do ++ if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then ++ # Evaluate the configuration. ++ eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`" ++ CC_quoted= ++ for arg in $CC; do ++ # Double-quote args containing other shell metacharacters. ++ func_quote_for_eval "$arg" ++ CC_quoted="$CC_quoted $func_quote_for_eval_result" ++ done ++ case "$@ " in ++ " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*) ++ # The compiler in the base compile command matches ++ # the one in the tagged configuration. ++ # Assume this is the tagged configuration we want. ++ tagname=$z ++ break ++ ;; ++ esac ++ fi ++ done ++ # If $tagname still isn't set, then no tagged configuration ++ # was found and let the user know that the "--tag" command ++ # line option must be used. ++ if test -z "$tagname"; then ++ func_echo "unable to infer tagged configuration" ++ func_fatal_error "specify a tag with \`--tag'" ++# else ++# func_verbose "using $tagname tagged configuration" ++ fi ++ ;; ++ esac ++ fi ++} ++ ++ ++ ++# func_write_libtool_object output_name pic_name nonpic_name ++# Create a libtool object file (analogous to a ".la" file), ++# but don't create it if we're doing a dry run. ++func_write_libtool_object () ++{ ++ write_libobj=${1} ++ if test "$build_libtool_libs" = yes; then ++ write_lobj=\'${2}\' ++ else ++ write_lobj=none ++ fi ++ ++ if test "$build_old_libs" = yes; then ++ write_oldobj=\'${3}\' ++ else ++ write_oldobj=none ++ fi ++ ++ $opt_dry_run || { ++ cat >${write_libobj}T <\?\'\ \ ]*|*]*|"") +- arg="\"$arg\"" +- ;; +- esac +- lastarg="$lastarg $arg" ++ func_quote_for_eval "$arg" ++ lastarg="$lastarg $func_quote_for_eval_result" + done + IFS="$save_ifs" +- lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"` ++ func_stripname ' ' '' "$lastarg" ++ lastarg=$func_stripname_result + + # Add the arguments to base_compile. + base_compile="$base_compile $lastarg" + continue + ;; + +- * ) ++ *) + # Accept the current argument as the source file. + # The previous "srcfile" becomes the current argument. + # +@@ -744,66 +1186,42 @@ + esac # case $arg_mode + + # Aesthetically quote the previous argument. +- lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"` +- +- case $lastarg in +- # Double-quote args containing other shell metacharacters. +- # Many Bourne shells cannot handle close brackets correctly +- # in scan sets, and some SunOS ksh mistreat backslash-escaping +- # in scan sets (worked around with variable expansion), +- # and furthermore cannot handle '|' '&' '(' ')' in scan sets +- # at all, so we specify them separately. +- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") +- lastarg="\"$lastarg\"" +- ;; +- esac +- +- base_compile="$base_compile $lastarg" ++ func_quote_for_eval "$lastarg" ++ base_compile="$base_compile $func_quote_for_eval_result" + done # for arg + + case $arg_mode in + arg) +- $echo "$modename: you must specify an argument for -Xcompile" +- exit $EXIT_FAILURE ++ func_fatal_error "you must specify an argument for -Xcompile" + ;; + target) +- $echo "$modename: you must specify a target with \`-o'" 1>&2 +- exit $EXIT_FAILURE ++ func_fatal_error "you must specify a target with \`-o'" + ;; + *) + # Get the name of the library object. +- [ -z "$libobj" ] && libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'` ++ test -z "$libobj" && { ++ func_basename "$srcfile" ++ libobj="$func_basename_result" ++ } + ;; + esac + + # Recognize several different file suffixes. + # If the user specifies -o file.o, it is replaced with file.lo +- xform='[cCFSifmso]' + case $libobj in +- *.ada) xform=ada ;; +- *.adb) xform=adb ;; +- *.ads) xform=ads ;; +- *.asm) xform=asm ;; +- *.c++) xform=c++ ;; +- *.cc) xform=cc ;; +- *.ii) xform=ii ;; +- *.class) xform=class ;; +- *.cpp) xform=cpp ;; +- *.cxx) xform=cxx ;; +- *.[fF][09]?) xform=[fF][09]. ;; +- *.for) xform=for ;; +- *.java) xform=java ;; +- *.obj) xform=obj ;; +- *.sx) xform=sx ;; ++ *.[cCFSifmso] | \ ++ *.ada | *.adb | *.ads | *.asm | \ ++ *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \ ++ *.[fF][09]? | *.for | *.java | *.obj | *.sx) ++ func_xform "$libobj" ++ libobj=$func_xform_result ++ ;; + esac + +- libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"` +- + case $libobj in +- *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;; ++ *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;; + *) +- $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2 +- exit $EXIT_FAILURE ++ func_fatal_error "cannot determine name of library object from \`$libobj'" + ;; + esac + +@@ -811,7 +1229,15 @@ + + for arg in $later; do + case $arg in ++ -shared) ++ test "$build_libtool_libs" != yes && \ ++ func_fatal_configuration "can not build a shared library" ++ build_old_libs=no ++ continue ++ ;; ++ + -static) ++ build_libtool_libs=no + build_old_libs=yes + continue + ;; +@@ -828,28 +1254,17 @@ + esac + done + +- qlibobj=`$echo "X$libobj" | $Xsed -e "$sed_quote_subst"` +- case $qlibobj in +- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") +- qlibobj="\"$qlibobj\"" ;; +- esac +- test "X$libobj" != "X$qlibobj" \ +- && $echo "X$libobj" | grep '[]~#^*{};<>?"'"'"' &()|`$[]' \ +- && $echo "$modename: libobj name \`$libobj' may not contain shell special characters." +- objname=`$echo "X$obj" | $Xsed -e 's%^.*/%%'` +- xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'` +- if test "X$xdir" = "X$obj"; then +- xdir= +- else +- xdir=$xdir/ +- fi ++ func_quote_for_eval "$libobj" ++ test "X$libobj" != "X$func_quote_for_eval_result" \ ++ && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"' &()|`$[]' \ ++ && func_warning "libobj name \`$libobj' may not contain shell special characters." ++ func_dirname_and_basename "$obj" "/" "" ++ objname="$func_basename_result" ++ xdir="$func_dirname_result" + lobj=${xdir}$objdir/$objname + +- if test -z "$base_compile"; then +- $echo "$modename: you must specify a compilation command" 1>&2 +- $echo "$help" 1>&2 +- exit $EXIT_FAILURE +- fi ++ test -z "$base_compile" && \ ++ func_fatal_help "you must specify a compilation command" + + # Delete any leftover library objects. + if test "$build_old_libs" = yes; then +@@ -858,9 +1273,6 @@ + removelist="$lobj $libobj ${libobj}T" + fi + +- $run $rm $removelist +- trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15 +- + # On Cygwin there's no "real" PIC flag so we must build both object types + case $host_os in + cygwin* | mingw* | pw32* | os2*) +@@ -875,10 +1287,8 @@ + # Calculate the filename of the output object if compiler does + # not support -o with -c + if test "$compiler_c_o" = no; then +- output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext} ++ output_obj=`$ECHO "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext} + lockfile="$output_obj.lock" +- removelist="$removelist $output_obj $lockfile" +- trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15 + else + output_obj= + need_locks=no +@@ -888,13 +1298,13 @@ + # Lock this critical section if it is needed + # We use this script file to make the link, it avoids creating a new file + if test "$need_locks" = yes; then +- until $run ln "$progpath" "$lockfile" 2>/dev/null; do +- $show "Waiting for $lockfile to be removed" ++ until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do ++ func_echo "Waiting for $lockfile to be removed" + sleep 2 + done + elif test "$need_locks" = warn; then + if test -f "$lockfile"; then +- $echo "\ ++ $ECHO "\ + *** ERROR, $lockfile exists and contains: + `cat $lockfile 2>/dev/null` + +@@ -905,34 +1315,22 @@ + avoid parallel builds (make -j) in this platform, or get a better + compiler." + +- $run $rm $removelist ++ $opt_dry_run || $RM $removelist + exit $EXIT_FAILURE + fi +- $echo "$srcfile" > "$lockfile" ++ removelist="$removelist $output_obj" ++ $ECHO "$srcfile" > "$lockfile" + fi + ++ $opt_dry_run || $RM $removelist ++ removelist="$removelist $lockfile" ++ trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15 ++ + if test -n "$fix_srcfile_path"; then + eval srcfile=\"$fix_srcfile_path\" + fi +- qsrcfile=`$echo "X$srcfile" | $Xsed -e "$sed_quote_subst"` +- case $qsrcfile in +- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") +- qsrcfile="\"$qsrcfile\"" ;; +- esac +- +- $run $rm "$libobj" "${libobj}T" +- +- # Create a libtool object file (analogous to a ".la" file), +- # but don't create it if we're doing a dry run. +- test -z "$run" && cat > ${libobj}T </dev/null`" != "X$srcfile"; then +- $echo "\ ++ $ECHO "\ + *** ERROR, $lockfile contains: + `cat $lockfile 2>/dev/null` + +@@ -985,45 +1370,27 @@ + avoid parallel builds (make -j) in this platform, or get a better + compiler." + +- $run $rm $removelist ++ $opt_dry_run || $RM $removelist + exit $EXIT_FAILURE + fi + + # Just move the object if needed, then go on to compile the next one + if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then +- $show "$mv $output_obj $lobj" +- if $run $mv $output_obj $lobj; then : +- else +- error=$? +- $run $rm $removelist +- exit $error +- fi ++ func_show_eval '$MV "$output_obj" "$lobj"' \ ++ 'error=$?; $opt_dry_run || $RM $removelist; exit $error' + fi + +- # Append the name of the PIC object to the libtool object file. +- test -z "$run" && cat >> ${libobj}T <> ${libobj}T </dev/null`" != "X$srcfile"; then +- $echo "\ ++ $ECHO "\ + *** ERROR, $lockfile contains: + `cat $lockfile 2>/dev/null` + +@@ -1057,3452 +1419,2569 @@ + avoid parallel builds (make -j) in this platform, or get a better + compiler." + +- $run $rm $removelist ++ $opt_dry_run || $RM $removelist + exit $EXIT_FAILURE + fi + + # Just move the object if needed + if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then +- $show "$mv $output_obj $obj" +- if $run $mv $output_obj $obj; then : +- else +- error=$? +- $run $rm $removelist +- exit $error +- fi ++ func_show_eval '$MV "$output_obj" "$obj"' \ ++ 'error=$?; $opt_dry_run || $RM $removelist; exit $error' + fi +- +- # Append the name of the non-PIC object the libtool object file. +- # Only append if the libtool object file exists. +- test -z "$run" && cat >> ${libobj}T <> ${libobj}T <&2 +- fi +- if test -n "$link_static_flag"; then +- dlopen_self=$dlopen_self_static +- fi +- prefer_static_libs=yes +- ;; +- -static) +- if test -z "$pic_flag" && test -n "$link_static_flag"; then +- dlopen_self=$dlopen_self_static +- fi +- prefer_static_libs=built +- ;; +- -static-libtool-libs) +- if test -z "$pic_flag" && test -n "$link_static_flag"; then +- dlopen_self=$dlopen_self_static +- fi +- prefer_static_libs=yes +- ;; +- esac +- build_libtool_libs=no +- build_old_libs=yes +- break +- ;; +- esac +- done ++If FILE is a libtool library, object or program, all the files associated ++with it are deleted. Otherwise, only FILE itself is deleted using RM." ++ ;; + +- # See if our shared archives depend on static archives. +- test -n "$old_archive_from_new_cmds" && build_old_libs=yes ++ compile) ++ $ECHO \ ++"Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE + +- # Go through the arguments, transforming them on the way. +- while test "$#" -gt 0; do +- arg="$1" +- shift +- case $arg in +- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") +- qarg=\"`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\" ### testsuite: skip nested quoting test +- ;; +- *) qarg=$arg ;; +- esac +- libtool_args="$libtool_args $qarg" ++Compile a source file into a libtool library object. + +- # If the previous option needs an argument, assign it. +- if test -n "$prev"; then +- case $prev in +- output) +- compile_command="$compile_command @OUTPUT@" +- finalize_command="$finalize_command @OUTPUT@" +- ;; +- esac ++This mode accepts the following additional options: + +- case $prev in +- dlfiles|dlprefiles) +- if test "$preload" = no; then +- # Add the symbol object into the linking commands. +- compile_command="$compile_command @SYMFILE@" +- finalize_command="$finalize_command @SYMFILE@" +- preload=yes +- fi +- case $arg in +- *.la | *.lo) ;; # We handle these cases below. +- force) +- if test "$dlself" = no; then +- dlself=needless +- export_dynamic=yes +- fi +- prev= +- continue +- ;; +- self) +- if test "$prev" = dlprefiles; then +- dlself=yes +- elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then +- dlself=yes +- else +- dlself=needless +- export_dynamic=yes +- fi +- prev= +- continue +- ;; +- *) +- if test "$prev" = dlfiles; then +- dlfiles="$dlfiles $arg" +- else +- dlprefiles="$dlprefiles $arg" +- fi +- prev= +- continue +- ;; +- esac +- ;; +- expsyms) +- export_symbols="$arg" +- if test ! -f "$arg"; then +- $echo "$modename: symbol file \`$arg' does not exist" +- exit $EXIT_FAILURE +- fi +- prev= +- continue +- ;; +- expsyms_regex) +- export_symbols_regex="$arg" +- prev= +- continue +- ;; +- inst_prefix) +- inst_prefix_dir="$arg" +- prev= +- continue +- ;; +- precious_regex) +- precious_files_regex="$arg" +- prev= +- continue +- ;; +- release) +- release="-$arg" +- prev= +- continue +- ;; +- objectlist) +- if test -f "$arg"; then +- save_arg=$arg +- moreargs= +- for fil in `cat $save_arg` +- do +-# moreargs="$moreargs $fil" +- arg=$fil +- # A libtool-controlled object. ++ -o OUTPUT-FILE set the output file name to OUTPUT-FILE ++ -no-suppress do not suppress compiler output for multiple passes ++ -prefer-pic try to building PIC objects only ++ -prefer-non-pic try to building non-PIC objects only ++ -shared do not build a \`.o' file suitable for static linking ++ -static only build a \`.o' file suitable for static linking + +- # Check to see that this really is a libtool object. +- if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then +- pic_object= +- non_pic_object= ++COMPILE-COMMAND is a command to be used in creating a \`standard' object file ++from the given SOURCEFILE. + +- # Read the .lo file +- # If there is no directory component, then add one. +- case $arg in +- */* | *\\*) . $arg ;; +- *) . ./$arg ;; +- esac ++The output file name is determined by removing the directory component from ++SOURCEFILE, then substituting the C source code suffix \`.c' with the ++library object suffix, \`.lo'." ++ ;; + +- if test -z "$pic_object" || \ +- test -z "$non_pic_object" || +- test "$pic_object" = none && \ +- test "$non_pic_object" = none; then +- $echo "$modename: cannot find name of object for \`$arg'" 1>&2 +- exit $EXIT_FAILURE +- fi ++ execute) ++ $ECHO \ ++"Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]... + +- # Extract subdirectory from the argument. +- xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` +- if test "X$xdir" = "X$arg"; then +- xdir= +- else +- xdir="$xdir/" +- fi ++Automatically set library path, then run a program. + +- if test "$pic_object" != none; then +- # Prepend the subdirectory the object is found in. +- pic_object="$xdir$pic_object" ++This mode accepts the following additional options: + +- if test "$prev" = dlfiles; then +- if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then +- dlfiles="$dlfiles $pic_object" +- prev= +- continue +- else +- # If libtool objects are unsupported, then we need to preload. +- prev=dlprefiles +- fi +- fi ++ -dlopen FILE add the directory containing FILE to the library path + +- # CHECK ME: I think I busted this. -Ossama +- if test "$prev" = dlprefiles; then +- # Preload the old-style object. +- dlprefiles="$dlprefiles $pic_object" +- prev= +- fi ++This mode sets the library path environment variable according to \`-dlopen' ++flags. + +- # A PIC object. +- libobjs="$libobjs $pic_object" +- arg="$pic_object" +- fi ++If any of the ARGS are libtool executable wrappers, then they are translated ++into their corresponding uninstalled binary, and any of their required library ++directories are added to the library path. + +- # Non-PIC object. +- if test "$non_pic_object" != none; then +- # Prepend the subdirectory the object is found in. +- non_pic_object="$xdir$non_pic_object" ++Then, COMMAND is executed, with ARGS as arguments." ++ ;; + +- # A standard non-PIC object +- non_pic_objects="$non_pic_objects $non_pic_object" +- if test -z "$pic_object" || test "$pic_object" = none ; then +- arg="$non_pic_object" +- fi +- else +- # If the PIC object exists, use it instead. +- # $xdir was prepended to $pic_object above. +- non_pic_object="$pic_object" +- non_pic_objects="$non_pic_objects $non_pic_object" +- fi +- else +- # Only an error if not doing a dry-run. +- if test -z "$run"; then +- $echo "$modename: \`$arg' is not a valid libtool object" 1>&2 +- exit $EXIT_FAILURE +- else +- # Dry-run case. ++ finish) ++ $ECHO \ ++"Usage: $progname [OPTION]... --mode=finish [LIBDIR]... + +- # Extract subdirectory from the argument. +- xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` +- if test "X$xdir" = "X$arg"; then +- xdir= +- else +- xdir="$xdir/" +- fi ++Complete the installation of libtool libraries. + +- pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"` +- non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"` +- libobjs="$libobjs $pic_object" +- non_pic_objects="$non_pic_objects $non_pic_object" +- fi +- fi +- done +- else +- $echo "$modename: link input file \`$save_arg' does not exist" +- exit $EXIT_FAILURE +- fi +- arg=$save_arg +- prev= +- continue +- ;; +- rpath | xrpath) +- # We need an absolute path. +- case $arg in +- [\\/]* | [A-Za-z]:[\\/]*) ;; +- *) +- $echo "$modename: only absolute run-paths are allowed" 1>&2 +- exit $EXIT_FAILURE +- ;; +- esac +- if test "$prev" = rpath; then +- case "$rpath " in +- *" $arg "*) ;; +- *) rpath="$rpath $arg" ;; +- esac +- else +- case "$xrpath " in +- *" $arg "*) ;; +- *) xrpath="$xrpath $arg" ;; +- esac +- fi +- prev= +- continue +- ;; +- xcompiler) +- compiler_flags="$compiler_flags $qarg" +- prev= +- compile_command="$compile_command $qarg" +- finalize_command="$finalize_command $qarg" +- continue +- ;; +- xlinker) +- linker_flags="$linker_flags $qarg" +- compiler_flags="$compiler_flags $wl$qarg" +- prev= +- compile_command="$compile_command $wl$qarg" +- finalize_command="$finalize_command $wl$qarg" +- continue +- ;; +- xcclinker) +- linker_flags="$linker_flags $qarg" +- compiler_flags="$compiler_flags $qarg" +- prev= +- compile_command="$compile_command $qarg" +- finalize_command="$finalize_command $qarg" +- continue +- ;; +- shrext) +- shrext_cmds="$arg" +- prev= +- continue +- ;; +- darwin_framework|darwin_framework_skip) +- test "$prev" = "darwin_framework" && compiler_flags="$compiler_flags $arg" +- compile_command="$compile_command $arg" +- finalize_command="$finalize_command $arg" +- prev= +- continue +- ;; +- *) +- eval "$prev=\"\$arg\"" +- prev= +- continue +- ;; +- esac +- fi # test -n "$prev" ++Each LIBDIR is a directory that contains libtool libraries. + +- prevarg="$arg" ++The commands that this mode executes may require superuser privileges. Use ++the \`--dry-run' option if you just want to see what would be executed." ++ ;; + +- case $arg in +- -all-static) +- if test -n "$link_static_flag"; then +- compile_command="$compile_command $link_static_flag" +- finalize_command="$finalize_command $link_static_flag" +- fi +- continue +- ;; ++ install) ++ $ECHO \ ++"Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND... + +- -allow-undefined) +- # FIXME: remove this flag sometime in the future. +- $echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2 +- continue +- ;; ++Install executables or libraries. + +- -avoid-version) +- avoid_version=yes +- continue +- ;; ++INSTALL-COMMAND is the installation command. The first component should be ++either the \`install' or \`cp' program. + +- -dlopen) +- prev=dlfiles +- continue +- ;; ++The following components of INSTALL-COMMAND are treated specially: + +- -dlpreopen) +- prev=dlprefiles +- continue +- ;; ++ -inst-prefix PREFIX-DIR Use PREFIX-DIR as a staging area for installation + +- -export-dynamic) +- export_dynamic=yes +- continue +- ;; ++The rest of the components are interpreted as arguments to that command (only ++BSD-compatible install options are recognized)." ++ ;; + +- -export-symbols | -export-symbols-regex) +- if test -n "$export_symbols" || test -n "$export_symbols_regex"; then +- $echo "$modename: more than one -exported-symbols argument is not allowed" +- exit $EXIT_FAILURE +- fi +- if test "X$arg" = "X-export-symbols"; then +- prev=expsyms +- else +- prev=expsyms_regex +- fi +- continue +- ;; ++ link) ++ $ECHO \ ++"Usage: $progname [OPTION]... --mode=link LINK-COMMAND... + +- -framework|-arch|-isysroot) +- case " $CC " in +- *" ${arg} ${1} "* | *" ${arg} ${1} "*) +- prev=darwin_framework_skip ;; +- *) compiler_flags="$compiler_flags $arg" +- prev=darwin_framework ;; +- esac +- compile_command="$compile_command $arg" +- finalize_command="$finalize_command $arg" +- continue +- ;; ++Link object files or libraries together to form another library, or to ++create an executable program. + +- -inst-prefix-dir) +- prev=inst_prefix +- continue +- ;; ++LINK-COMMAND is a command using the C compiler that you would use to create ++a program from several object files. + +- # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:* +- # so, if we see these flags be careful not to treat them like -L +- -L[A-Z][A-Z]*:*) +- case $with_gcc/$host in +- no/*-*-irix* | /*-*-irix*) +- compile_command="$compile_command $arg" +- finalize_command="$finalize_command $arg" +- ;; +- esac +- continue +- ;; ++The following components of LINK-COMMAND are treated specially: + +- -L*) +- dir=`$echo "X$arg" | $Xsed -e 's/^-L//'` +- # We need an absolute path. +- case $dir in +- [\\/]* | [A-Za-z]:[\\/]*) ;; +- *) +- absdir=`cd "$dir" && pwd` +- if test -z "$absdir"; then +- $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2 +- absdir="$dir" +- notinst_path="$notinst_path $dir" +- fi +- dir="$absdir" +- ;; +- esac +- case "$deplibs " in +- *" -L$dir "*) ;; +- *) +- deplibs="$deplibs -L$dir" +- lib_search_path="$lib_search_path $dir" +- ;; +- esac +- case $host in +- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) +- testbindir=`$echo "X$dir" | $Xsed -e 's*/lib$*/bin*'` +- case :$dllsearchpath: in +- *":$dir:"*) ;; +- *) dllsearchpath="$dllsearchpath:$dir";; +- esac +- case :$dllsearchpath: in +- *":$testbindir:"*) ;; +- *) dllsearchpath="$dllsearchpath:$testbindir";; +- esac +- ;; +- esac +- continue +- ;; ++ -all-static do not do any dynamic linking at all ++ -avoid-version do not add a version suffix if possible ++ -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime ++ -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols ++ -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) ++ -export-symbols SYMFILE ++ try to export only the symbols listed in SYMFILE ++ -export-symbols-regex REGEX ++ try to export only the symbols matching REGEX ++ -LLIBDIR search LIBDIR for required installed libraries ++ -lNAME OUTPUT-FILE requires the installed library libNAME ++ -module build a library that can dlopened ++ -no-fast-install disable the fast-install mode ++ -no-install link a not-installable executable ++ -no-undefined declare that a library does not refer to external symbols ++ -o OUTPUT-FILE create OUTPUT-FILE from the specified objects ++ -objectlist FILE Use a list of object files found in FILE to specify objects ++ -precious-files-regex REGEX ++ don't remove output files matching REGEX ++ -release RELEASE specify package release information ++ -rpath LIBDIR the created library will eventually be installed in LIBDIR ++ -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries ++ -shared only do dynamic linking of libtool libraries ++ -shrext SUFFIX override the standard shared library file extension ++ -static do not do any dynamic linking of uninstalled libtool libraries ++ -static-libtool-libs ++ do not do any dynamic linking of libtool libraries ++ -version-info CURRENT[:REVISION[:AGE]] ++ specify library version info [each variable defaults to 0] ++ -weak LIBNAME declare that the target provides the LIBNAME interface + +- -l*) +- if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then +- case $host in +- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos*) +- # These systems don't actually have a C or math library (as such) +- continue +- ;; +- *-*-os2*) +- # These systems don't actually have a C library (as such) +- test "X$arg" = "X-lc" && continue +- ;; +- *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) +- # Do not include libc due to us having libc/libc_r. +- test "X$arg" = "X-lc" && continue +- ;; +- *-*-rhapsody* | *-*-darwin1.[012]) +- # Rhapsody C and math libraries are in the System framework +- deplibs="$deplibs -framework System" +- continue +- ;; +- *-*-sco3.2v5* | *-*-sco5v6*) +- # Causes problems with __ctype +- test "X$arg" = "X-lc" && continue +- ;; +- *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) +- # Compiler inserts libc in the correct place for threads to work +- test "X$arg" = "X-lc" && continue +- ;; +- esac +- elif test "X$arg" = "X-lc_r"; then +- case $host in +- *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) +- # Do not include libc_r directly, use -pthread flag. +- continue +- ;; +- esac +- fi +- deplibs="$deplibs $arg" +- continue +- ;; ++All other options (arguments beginning with \`-') are ignored. + +- # Tru64 UNIX uses -model [arg] to determine the layout of C++ +- # classes, name mangling, and exception handling. +- -model) +- compile_command="$compile_command $arg" +- compiler_flags="$compiler_flags $arg" +- finalize_command="$finalize_command $arg" +- prev=xcompiler +- continue +- ;; ++Every other argument is treated as a filename. Files ending in \`.la' are ++treated as uninstalled libtool libraries, other files are standard or library ++object files. + +- -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads) +- compiler_flags="$compiler_flags $arg" +- compile_command="$compile_command $arg" +- finalize_command="$finalize_command $arg" +- continue +- ;; ++If the OUTPUT-FILE ends in \`.la', then a libtool library is created, ++only library objects (\`.lo' files) may be specified, and \`-rpath' is ++required, except when creating a convenience library. + +- -multi_module) +- single_module="${wl}-multi_module" +- continue +- ;; ++If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created ++using \`ar' and \`ranlib', or on Windows using \`lib'. + +- -module) +- module=yes +- continue +- ;; ++If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file ++is created, otherwise an executable program is created." ++ ;; + +- # -64, -mips[0-9] enable 64-bit mode on the SGI compiler +- # -r[0-9][0-9]* specifies the processor on the SGI compiler +- # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler +- # +DA*, +DD* enable 64-bit mode on the HP compiler +- # -q* pass through compiler args for the IBM compiler +- # -m* pass through architecture-specific compiler args for GCC +- # -m*, -t[45]*, -txscale* pass through architecture-specific +- # compiler args for GCC +- # -p, -pg, --coverage, -fprofile-* pass through profiling flag for GCC +- # -F/path gives path to uninstalled frameworks, gcc on darwin +- # @file GCC response files +- -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \ +- -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*) ++ uninstall) ++ $ECHO \ ++"Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE... + +- # Unknown arguments in both finalize_command and compile_command need +- # to be aesthetically quoted because they are evaled later. +- arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` +- case $arg in +- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") +- arg="\"$arg\"" +- ;; +- esac +- compile_command="$compile_command $arg" +- finalize_command="$finalize_command $arg" +- compiler_flags="$compiler_flags $arg" +- continue +- ;; ++Remove libraries from an installation directory. + +- -shrext) +- prev=shrext +- continue +- ;; ++RM is the name of the program to use to delete files associated with each FILE ++(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed ++to RM. + +- -no-fast-install) +- fast_install=no +- continue +- ;; ++If FILE is a libtool library, all the files associated with it are deleted. ++Otherwise, only FILE itself is deleted using RM." ++ ;; + +- -no-install) +- case $host in +- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin*) +- # The PATH hackery in wrapper scripts is required on Windows +- # and Darwin in order for the loader to find any dlls it needs. +- $echo "$modename: warning: \`-no-install' is ignored for $host" 1>&2 +- $echo "$modename: warning: assuming \`-no-fast-install' instead" 1>&2 +- fast_install=no +- ;; +- *) no_install=yes ;; +- esac +- continue +- ;; ++ *) ++ func_fatal_help "invalid operation mode \`$mode'" ++ ;; ++ esac + +- -no-undefined) +- allow_undefined=no +- continue +- ;; ++ $ECHO ++ $ECHO "Try \`$progname --help' for more information about other modes." + +- -objectlist) +- prev=objectlist +- continue +- ;; ++ exit $? ++} + +- -o) prev=output ;; ++ # Now that we've collected a possible --mode arg, show help if necessary ++ $opt_help && func_mode_help + +- -precious-files-regex) +- prev=precious_regex +- continue +- ;; + +- -release) +- prev=release +- continue +- ;; ++# func_mode_execute arg... ++func_mode_execute () ++{ ++ $opt_debug ++ # The first argument is the command name. ++ cmd="$nonopt" ++ test -z "$cmd" && \ ++ func_fatal_help "you must specify a COMMAND" + +- -rpath) +- prev=rpath +- continue +- ;; ++ # Handle -dlopen flags immediately. ++ for file in $execute_dlfiles; do ++ test -f "$file" \ ++ || func_fatal_help "\`$file' is not a file" + +- -R) +- prev=xrpath +- continue +- ;; ++ dir= ++ case $file in ++ *.la) ++ # Check to see that this really is a libtool archive. ++ func_lalib_unsafe_p "$file" \ ++ || func_fatal_help "\`$lib' is not a valid libtool archive" + +- -R*) +- dir=`$echo "X$arg" | $Xsed -e 's/^-R//'` +- # We need an absolute path. +- case $dir in +- [\\/]* | [A-Za-z]:[\\/]*) ;; +- *) +- $echo "$modename: only absolute run-paths are allowed" 1>&2 +- exit $EXIT_FAILURE +- ;; +- esac +- case "$xrpath " in +- *" $dir "*) ;; +- *) xrpath="$xrpath $dir" ;; +- esac +- continue +- ;; ++ # Read the libtool library. ++ dlname= ++ library_names= ++ func_source "$file" + +- -static | -static-libtool-libs) +- # The effects of -static are defined in a previous loop. +- # We used to do the same as -all-static on platforms that +- # didn't have a PIC flag, but the assumption that the effects +- # would be equivalent was wrong. It would break on at least +- # Digital Unix and AIX. +- continue +- ;; ++ # Skip this library if it cannot be dlopened. ++ if test -z "$dlname"; then ++ # Warn if it was a shared library. ++ test -n "$library_names" && \ ++ func_warning "\`$file' was not linked with \`-export-dynamic'" ++ continue ++ fi + +- -thread-safe) +- thread_safe=yes +- continue ++ func_dirname "$file" "" "." ++ dir="$func_dirname_result" ++ ++ if test -f "$dir/$objdir/$dlname"; then ++ dir="$dir/$objdir" ++ else ++ if test ! -f "$dir/$dlname"; then ++ func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" ++ fi ++ fi + ;; + +- -version-info) +- prev=vinfo +- continue ++ *.lo) ++ # Just add the directory containing the .lo file. ++ func_dirname "$file" "" "." ++ dir="$func_dirname_result" + ;; +- -version-number) +- prev=vinfo +- vinfo_number=yes ++ ++ *) ++ func_warning "\`-dlopen' is ignored for non-libtool libraries and objects" + continue + ;; ++ esac + +- -Wc,*) +- args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'` +- arg= +- save_ifs="$IFS"; IFS=',' +- for flag in $args; do +- IFS="$save_ifs" +- case $flag in +- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") +- flag="\"$flag\"" +- ;; +- esac +- arg="$arg $wl$flag" +- compiler_flags="$compiler_flags $flag" +- done +- IFS="$save_ifs" +- arg=`$echo "X$arg" | $Xsed -e "s/^ //"` +- ;; ++ # Get the absolute pathname. ++ absdir=`cd "$dir" && pwd` ++ test -n "$absdir" && dir="$absdir" + +- -Wl,*) +- args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wl,//'` +- arg= +- save_ifs="$IFS"; IFS=',' +- for flag in $args; do +- IFS="$save_ifs" +- case $flag in +- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") +- flag="\"$flag\"" +- ;; +- esac +- arg="$arg $wl$flag" +- compiler_flags="$compiler_flags $wl$flag" +- linker_flags="$linker_flags $flag" +- done +- IFS="$save_ifs" +- arg=`$echo "X$arg" | $Xsed -e "s/^ //"` +- ;; ++ # Now add the directory to shlibpath_var. ++ if eval "test -z \"\$$shlibpath_var\""; then ++ eval "$shlibpath_var=\"\$dir\"" ++ else ++ eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\"" ++ fi ++ done + +- -Xcompiler) +- prev=xcompiler +- continue +- ;; ++ # This variable tells wrapper scripts just to set shlibpath_var ++ # rather than running their programs. ++ libtool_execute_magic="$magic" + +- -Xlinker) +- prev=xlinker +- continue ++ # Check if any of the arguments is a wrapper script. ++ args= ++ for file ++ do ++ case $file in ++ -*) ;; ++ *) ++ # Do a test to see if this is really a libtool program. ++ if func_ltwrapper_script_p "$file"; then ++ func_source "$file" ++ # Transform arg to wrapped name. ++ file="$progdir/$program" ++ elif func_ltwrapper_executable_p "$file"; then ++ func_ltwrapper_scriptname "$file" ++ func_source "$func_ltwrapper_scriptname_result" ++ # Transform arg to wrapped name. ++ file="$progdir/$program" ++ fi + ;; ++ esac ++ # Quote arguments (to preserve shell metacharacters). ++ func_quote_for_eval "$file" ++ args="$args $func_quote_for_eval_result" ++ done + +- -XCClinker) +- prev=xcclinker +- continue +- ;; ++ if test "X$opt_dry_run" = Xfalse; then ++ if test -n "$shlibpath_var"; then ++ # Export the shlibpath_var. ++ eval "export $shlibpath_var" ++ fi + +- # Some other compiler flag. +- -* | +*) +- # Unknown arguments in both finalize_command and compile_command need +- # to be aesthetically quoted because they are evaled later. +- arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` +- case $arg in +- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") +- arg="\"$arg\"" +- ;; +- esac +- ;; ++ # Restore saved environment variables ++ for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES ++ do ++ eval "if test \"\${save_$lt_var+set}\" = set; then ++ $lt_var=\$save_$lt_var; export $lt_var ++ else ++ $lt_unset $lt_var ++ fi" ++ done + +- *.$objext) +- # A standard object. +- objs="$objs $arg" +- ;; ++ # Now prepare to actually exec the command. ++ exec_cmd="\$cmd$args" ++ else ++ # Display what would be done. ++ if test -n "$shlibpath_var"; then ++ eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\"" ++ $ECHO "export $shlibpath_var" ++ fi ++ $ECHO "$cmd$args" ++ exit $EXIT_SUCCESS ++ fi ++} + +- *.lo) +- # A libtool-controlled object. ++test "$mode" = execute && func_mode_execute ${1+"$@"} + +- # Check to see that this really is a libtool object. +- if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then +- pic_object= +- non_pic_object= + +- # Read the .lo file +- # If there is no directory component, then add one. +- case $arg in +- */* | *\\*) . $arg ;; +- *) . ./$arg ;; +- esac ++# func_mode_finish arg... ++func_mode_finish () ++{ ++ $opt_debug ++ libdirs="$nonopt" ++ admincmds= + +- if test -z "$pic_object" || \ +- test -z "$non_pic_object" || +- test "$pic_object" = none && \ +- test "$non_pic_object" = none; then +- $echo "$modename: cannot find name of object for \`$arg'" 1>&2 +- exit $EXIT_FAILURE +- fi ++ if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then ++ for dir ++ do ++ libdirs="$libdirs $dir" ++ done + +- # Extract subdirectory from the argument. +- xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` +- if test "X$xdir" = "X$arg"; then +- xdir= +- else +- xdir="$xdir/" +- fi ++ for libdir in $libdirs; do ++ if test -n "$finish_cmds"; then ++ # Do each command in the finish commands. ++ func_execute_cmds "$finish_cmds" 'admincmds="$admincmds ++'"$cmd"'"' ++ fi ++ if test -n "$finish_eval"; then ++ # Do the single finish_eval. ++ eval cmds=\"$finish_eval\" ++ $opt_dry_run || eval "$cmds" || admincmds="$admincmds ++ $cmds" ++ fi ++ done ++ fi + +- if test "$pic_object" != none; then +- # Prepend the subdirectory the object is found in. +- pic_object="$xdir$pic_object" ++ # Exit here if they wanted silent mode. ++ $opt_silent && exit $EXIT_SUCCESS + +- if test "$prev" = dlfiles; then +- if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then +- dlfiles="$dlfiles $pic_object" +- prev= +- continue +- else +- # If libtool objects are unsupported, then we need to preload. +- prev=dlprefiles +- fi +- fi ++ $ECHO "X----------------------------------------------------------------------" | $Xsed ++ $ECHO "Libraries have been installed in:" ++ for libdir in $libdirs; do ++ $ECHO " $libdir" ++ done ++ $ECHO ++ $ECHO "If you ever happen to want to link against installed libraries" ++ $ECHO "in a given directory, LIBDIR, you must either use libtool, and" ++ $ECHO "specify the full pathname of the library, or use the \`-LLIBDIR'" ++ $ECHO "flag during linking and do at least one of the following:" ++ if test -n "$shlibpath_var"; then ++ $ECHO " - add LIBDIR to the \`$shlibpath_var' environment variable" ++ $ECHO " during execution" ++ fi ++ if test -n "$runpath_var"; then ++ $ECHO " - add LIBDIR to the \`$runpath_var' environment variable" ++ $ECHO " during linking" ++ fi ++ if test -n "$hardcode_libdir_flag_spec"; then ++ libdir=LIBDIR ++ eval flag=\"$hardcode_libdir_flag_spec\" + +- # CHECK ME: I think I busted this. -Ossama +- if test "$prev" = dlprefiles; then +- # Preload the old-style object. +- dlprefiles="$dlprefiles $pic_object" +- prev= +- fi ++ $ECHO " - use the \`$flag' linker flag" ++ fi ++ if test -n "$admincmds"; then ++ $ECHO " - have your system administrator run these commands:$admincmds" ++ fi ++ if test -f /etc/ld.so.conf; then ++ $ECHO " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" ++ fi ++ $ECHO + +- # A PIC object. +- libobjs="$libobjs $pic_object" +- arg="$pic_object" +- fi ++ $ECHO "See any operating system documentation about shared libraries for" ++ case $host in ++ solaris2.[6789]|solaris2.1[0-9]) ++ $ECHO "more information, such as the ld(1), crle(1) and ld.so(8) manual" ++ $ECHO "pages." ++ ;; ++ *) ++ $ECHO "more information, such as the ld(1) and ld.so(8) manual pages." ++ ;; ++ esac ++ $ECHO "X----------------------------------------------------------------------" | $Xsed ++ exit $EXIT_SUCCESS ++} + +- # Non-PIC object. +- if test "$non_pic_object" != none; then +- # Prepend the subdirectory the object is found in. +- non_pic_object="$xdir$non_pic_object" ++test "$mode" = finish && func_mode_finish ${1+"$@"} + +- # A standard non-PIC object +- non_pic_objects="$non_pic_objects $non_pic_object" +- if test -z "$pic_object" || test "$pic_object" = none ; then +- arg="$non_pic_object" +- fi +- else +- # If the PIC object exists, use it instead. +- # $xdir was prepended to $pic_object above. +- non_pic_object="$pic_object" +- non_pic_objects="$non_pic_objects $non_pic_object" +- fi +- else +- # Only an error if not doing a dry-run. +- if test -z "$run"; then +- $echo "$modename: \`$arg' is not a valid libtool object" 1>&2 +- exit $EXIT_FAILURE +- else +- # Dry-run case. + +- # Extract subdirectory from the argument. +- xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` +- if test "X$xdir" = "X$arg"; then +- xdir= +- else +- xdir="$xdir/" +- fi ++# func_mode_install arg... ++func_mode_install () ++{ ++ $opt_debug ++ # There may be an optional sh(1) argument at the beginning of ++ # install_prog (especially on Windows NT). ++ if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh || ++ # Allow the use of GNU shtool's install command. ++ $ECHO "X$nonopt" | $GREP shtool >/dev/null; then ++ # Aesthetically quote it. ++ func_quote_for_eval "$nonopt" ++ install_prog="$func_quote_for_eval_result " ++ arg=$1 ++ shift ++ else ++ install_prog= ++ arg=$nonopt ++ fi + +- pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"` +- non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"` +- libobjs="$libobjs $pic_object" +- non_pic_objects="$non_pic_objects $non_pic_object" +- fi +- fi +- ;; ++ # The real first argument should be the name of the installation program. ++ # Aesthetically quote it. ++ func_quote_for_eval "$arg" ++ install_prog="$install_prog$func_quote_for_eval_result" + +- *.$libext) +- # An archive. +- deplibs="$deplibs $arg" +- old_deplibs="$old_deplibs $arg" ++ # We need to accept at least all the BSD install flags. ++ dest= ++ files= ++ opts= ++ prev= ++ install_type= ++ isdir=no ++ stripme= ++ for arg ++ do ++ if test -n "$dest"; then ++ files="$files $dest" ++ dest=$arg + continue +- ;; +- +- *.la) +- # A libtool-controlled library. ++ fi + +- if test "$prev" = dlfiles; then +- # This library was specified with -dlopen. +- dlfiles="$dlfiles $arg" +- prev= +- elif test "$prev" = dlprefiles; then +- # The library was specified with -dlpreopen. +- dlprefiles="$dlprefiles $arg" ++ case $arg in ++ -d) isdir=yes ;; ++ -f) ++ case " $install_prog " in ++ *[\\\ /]cp\ *) ;; ++ *) prev=$arg ;; ++ esac ++ ;; ++ -g | -m | -o) ++ prev=$arg ++ ;; ++ -s) ++ stripme=" -s" ++ continue ++ ;; ++ -*) ++ ;; ++ *) ++ # If the previous option needed an argument, then skip it. ++ if test -n "$prev"; then + prev= + else +- deplibs="$deplibs $arg" ++ dest=$arg ++ continue + fi +- continue + ;; ++ esac + +- # Some other compiler argument. +- *) +- # Unknown arguments in both finalize_command and compile_command need +- # to be aesthetically quoted because they are evaled later. +- arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` +- case $arg in +- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") +- arg="\"$arg\"" +- ;; +- esac +- ;; +- esac # arg ++ # Aesthetically quote the argument. ++ func_quote_for_eval "$arg" ++ install_prog="$install_prog $func_quote_for_eval_result" ++ done + +- # Now actually substitute the argument into the commands. +- if test -n "$arg"; then +- compile_command="$compile_command $arg" +- finalize_command="$finalize_command $arg" +- fi +- done # argument parsing loop ++ test -z "$install_prog" && \ ++ func_fatal_help "you must specify an install program" + +- if test -n "$prev"; then +- $echo "$modename: the \`$prevarg' option requires an argument" 1>&2 +- $echo "$help" 1>&2 +- exit $EXIT_FAILURE +- fi ++ test -n "$prev" && \ ++ func_fatal_help "the \`$prev' option requires an argument" + +- if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then +- eval arg=\"$export_dynamic_flag_spec\" +- compile_command="$compile_command $arg" +- finalize_command="$finalize_command $arg" ++ if test -z "$files"; then ++ if test -z "$dest"; then ++ func_fatal_help "no file or destination specified" ++ else ++ func_fatal_help "you must specify a destination" ++ fi + fi + +- oldlibs= +- # calculate the name of the file, without its directory +- outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'` +- libobjs_save="$libobjs" ++ # Strip any trailing slash from the destination. ++ func_stripname '' '/' "$dest" ++ dest=$func_stripname_result + +- if test -n "$shlibpath_var"; then +- # get the directories listed in $shlibpath_var +- eval shlib_search_path=\`\$echo \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\` ++ # Check to see that the destination is a directory. ++ test -d "$dest" && isdir=yes ++ if test "$isdir" = yes; then ++ destdir="$dest" ++ destname= + else +- shlib_search_path= +- fi +- eval sys_lib_search_path=\"$sys_lib_search_path_spec\" +- eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\" ++ func_dirname_and_basename "$dest" "" "." ++ destdir="$func_dirname_result" ++ destname="$func_basename_result" + +- output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'` +- if test "X$output_objdir" = "X$output"; then +- output_objdir="$objdir" +- else +- output_objdir="$output_objdir/$objdir" +- fi +- # Create the object directory. +- if test ! -d "$output_objdir"; then +- $show "$mkdir $output_objdir" +- $run $mkdir $output_objdir +- exit_status=$? +- if test "$exit_status" -ne 0 && test ! -d "$output_objdir"; then +- exit $exit_status +- fi ++ # Not a directory, so check to see that there is only one file specified. ++ set dummy $files; shift ++ test "$#" -gt 1 && \ ++ func_fatal_help "\`$dest' is not a directory" + fi +- +- # Determine the type of output +- case $output in +- "") +- $echo "$modename: you must specify an output file" 1>&2 +- $echo "$help" 1>&2 +- exit $EXIT_FAILURE +- ;; +- *.$libext) linkmode=oldlib ;; +- *.lo | *.$objext) linkmode=obj ;; +- *.la) linkmode=lib ;; +- *) linkmode=prog ;; # Anything else should be a program. +- esac +- +- case $host in +- *cygwin* | *mingw* | *pw32*) +- # don't eliminate duplications in $postdeps and $predeps +- duplicate_compiler_generated_deps=yes +- ;; ++ case $destdir in ++ [\\/]* | [A-Za-z]:[\\/]*) ;; + *) +- duplicate_compiler_generated_deps=$duplicate_deps ++ for file in $files; do ++ case $file in ++ *.lo) ;; ++ *) ++ func_fatal_help "\`$destdir' must be an absolute directory name" ++ ;; ++ esac ++ done + ;; + esac +- specialdeplibs= + +- libs= +- # Find all interdependent deplibs by searching for libraries +- # that are linked more than once (e.g. -la -lb -la) +- for deplib in $deplibs; do +- if test "X$duplicate_deps" = "Xyes" ; then +- case "$libs " in +- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; +- esac +- fi +- libs="$libs $deplib" +- done ++ # This variable tells wrapper scripts just to set variables rather ++ # than running their programs. ++ libtool_install_magic="$magic" + +- if test "$linkmode" = lib; then +- libs="$predeps $libs $compiler_lib_search_path $postdeps" ++ staticlibs= ++ future_libdirs= ++ current_libdirs= ++ for file in $files; do + +- # Compute libraries that are listed more than once in $predeps +- # $postdeps and mark them as special (i.e., whose duplicates are +- # not to be eliminated). +- pre_post_deps= +- if test "X$duplicate_compiler_generated_deps" = "Xyes" ; then +- for pre_post_dep in $predeps $postdeps; do +- case "$pre_post_deps " in +- *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;; ++ # Do each installation. ++ case $file in ++ *.$libext) ++ # Do the static libraries later. ++ staticlibs="$staticlibs $file" ++ ;; ++ ++ *.la) ++ # Check to see that this really is a libtool archive. ++ func_lalib_unsafe_p "$file" \ ++ || func_fatal_help "\`$file' is not a valid libtool archive" ++ ++ library_names= ++ old_library= ++ relink_command= ++ func_source "$file" ++ ++ # Add the libdir to current_libdirs if it is the destination. ++ if test "X$destdir" = "X$libdir"; then ++ case "$current_libdirs " in ++ *" $libdir "*) ;; ++ *) current_libdirs="$current_libdirs $libdir" ;; + esac +- pre_post_deps="$pre_post_deps $pre_post_dep" +- done +- fi +- pre_post_deps= +- fi ++ else ++ # Note the libdir as a future libdir. ++ case "$future_libdirs " in ++ *" $libdir "*) ;; ++ *) future_libdirs="$future_libdirs $libdir" ;; ++ esac ++ fi + +- deplibs= +- newdependency_libs= +- newlib_search_path= +- need_relink=no # whether we're linking any uninstalled libtool libraries +- notinst_deplibs= # not-installed libtool libraries +- case $linkmode in +- lib) +- passes="conv link" +- for file in $dlfiles $dlprefiles; do +- case $file in +- *.la) ;; +- *) +- $echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2 +- exit $EXIT_FAILURE ++ func_dirname "$file" "/" "" ++ dir="$func_dirname_result" ++ dir="$dir$objdir" ++ ++ if test -n "$relink_command"; then ++ # Determine the prefix the user has applied to our future dir. ++ inst_prefix_dir=`$ECHO "X$destdir" | $Xsed -e "s%$libdir\$%%"` ++ ++ # Don't allow the user to place us outside of our expected ++ # location b/c this prevents finding dependent libraries that ++ # are installed to the same prefix. ++ # At present, this check doesn't affect windows .dll's that ++ # are installed into $libdir/../bin (currently, that works fine) ++ # but it's something to keep an eye on. ++ test "$inst_prefix_dir" = "$destdir" && \ ++ func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir" ++ ++ if test -n "$inst_prefix_dir"; then ++ # Stick the inst_prefix_dir data into the link command. ++ relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"` ++ else ++ relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%%"` ++ fi ++ ++ func_warning "relinking \`$file'" ++ func_show_eval "$relink_command" \ ++ 'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"' ++ fi ++ ++ # See the names of the shared library. ++ set dummy $library_names; shift ++ if test -n "$1"; then ++ realname="$1" ++ shift ++ ++ srcname="$realname" ++ test -n "$relink_command" && srcname="$realname"T ++ ++ # Install the shared library and build the symlinks. ++ func_show_eval "$install_prog $dir/$srcname $destdir/$realname" \ ++ 'exit $?' ++ tstripme="$stripme" ++ case $host_os in ++ cygwin* | mingw* | pw32*) ++ case $realname in ++ *.dll.a) ++ tstripme="" ++ ;; ++ esac + ;; + esac +- done +- ;; +- prog) +- compile_deplibs= +- finalize_deplibs= +- alldeplibs=no +- newdlfiles= +- newdlprefiles= +- passes="conv scan dlopen dlpreopen link" +- ;; +- *) passes="conv" +- ;; +- esac +- for pass in $passes; do +- if test "$linkmode,$pass" = "lib,link" || +- test "$linkmode,$pass" = "prog,scan"; then +- libs="$deplibs" +- deplibs= +- fi +- if test "$linkmode" = prog; then +- case $pass in +- dlopen) libs="$dlfiles" ;; +- dlpreopen) libs="$dlprefiles" ;; +- link) libs="$deplibs %DEPLIBS% $dependency_libs" ;; +- esac +- fi +- if test "$pass" = dlopen; then +- # Collect dlpreopened libraries +- save_deplibs="$deplibs" +- deplibs= +- fi +- for deplib in $libs; do +- lib= +- found=no +- case $deplib in +- -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads) +- if test "$linkmode,$pass" = "prog,link"; then +- compile_deplibs="$deplib $compile_deplibs" +- finalize_deplibs="$deplib $finalize_deplibs" +- else +- compiler_flags="$compiler_flags $deplib" +- fi +- continue +- ;; +- -l*) +- if test "$linkmode" != lib && test "$linkmode" != prog; then +- $echo "$modename: warning: \`-l' is ignored for archives/objects" 1>&2 +- continue +- fi +- name=`$echo "X$deplib" | $Xsed -e 's/^-l//'` +- if test "$linkmode" = lib; then +- searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path" +- else +- searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path" ++ if test -n "$tstripme" && test -n "$striplib"; then ++ func_show_eval "$striplib $destdir/$realname" 'exit $?' + fi +- for searchdir in $searchdirs; do +- for search_ext in .la $std_shrext .so .a; do +- # Search the libtool library +- lib="$searchdir/lib${name}${search_ext}" +- if test -f "$lib"; then +- if test "$search_ext" = ".la"; then +- found=yes +- else +- found=no +- fi +- break 2 +- fi ++ ++ if test "$#" -gt 0; then ++ # Delete the old symlinks, and create new ones. ++ # Try `ln -sf' first, because the `ln' binary might depend on ++ # the symlink we replace! Solaris /bin/ln does not understand -f, ++ # so we also need to try rm && ln -s. ++ for linkname ++ do ++ test "$linkname" != "$realname" \ ++ && func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })" + done +- done +- if test "$found" != yes; then +- # deplib doesn't seem to be a libtool library +- if test "$linkmode,$pass" = "prog,link"; then +- compile_deplibs="$deplib $compile_deplibs" +- finalize_deplibs="$deplib $finalize_deplibs" +- else +- deplibs="$deplib $deplibs" +- test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" +- fi +- continue +- else # deplib is a libtool library +- # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib, +- # We need to do some special things here, and not later. +- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then +- case " $predeps $postdeps " in +- *" $deplib "*) +- if (${SED} -e '2q' $lib | +- grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then +- library_names= +- old_library= +- case $lib in +- */* | *\\*) . $lib ;; +- *) . ./$lib ;; +- esac +- for l in $old_library $library_names; do +- ll="$l" +- done +- if test "X$ll" = "X$old_library" ; then # only static version available +- found=no +- ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'` +- test "X$ladir" = "X$lib" && ladir="." +- lib=$ladir/$old_library +- if test "$linkmode,$pass" = "prog,link"; then +- compile_deplibs="$deplib $compile_deplibs" +- finalize_deplibs="$deplib $finalize_deplibs" +- else +- deplibs="$deplib $deplibs" +- test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" +- fi +- continue +- fi +- fi +- ;; +- *) ;; +- esac +- fi +- fi +- ;; # -l +- -L*) +- case $linkmode in +- lib) +- deplibs="$deplib $deplibs" +- test "$pass" = conv && continue +- newdependency_libs="$deplib $newdependency_libs" +- newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'` +- ;; +- prog) +- if test "$pass" = conv; then +- deplibs="$deplib $deplibs" +- continue +- fi +- if test "$pass" = scan; then +- deplibs="$deplib $deplibs" +- else +- compile_deplibs="$deplib $compile_deplibs" +- finalize_deplibs="$deplib $finalize_deplibs" +- fi +- newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'` +- ;; +- *) +- $echo "$modename: warning: \`-L' is ignored for archives/objects" 1>&2 +- ;; +- esac # linkmode +- continue +- ;; # -L +- -R*) +- if test "$pass" = link; then +- dir=`$echo "X$deplib" | $Xsed -e 's/^-R//'` +- # Make sure the xrpath contains only unique directories. +- case "$xrpath " in +- *" $dir "*) ;; +- *) xrpath="$xrpath $dir" ;; +- esac +- fi +- deplibs="$deplib $deplibs" +- continue +- ;; +- *.la) lib="$deplib" ;; +- *.$libext) +- if test "$pass" = conv; then +- deplibs="$deplib $deplibs" +- continue +- fi +- case $linkmode in +- lib) +- valid_a_lib=no +- case $deplibs_check_method in +- match_pattern*) +- set dummy $deplibs_check_method +- match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"` +- if eval $echo \"$deplib\" 2>/dev/null \ +- | $SED 10q \ +- | $EGREP "$match_pattern_regex" > /dev/null; then +- valid_a_lib=yes +- fi +- ;; +- pass_all) +- valid_a_lib=yes +- ;; +- esac +- if test "$valid_a_lib" != yes; then +- $echo +- $echo "*** Warning: Trying to link with static lib archive $deplib." +- $echo "*** I have the capability to make that library automatically link in when" +- $echo "*** you link to this library. But I can only do this if you have a" +- $echo "*** shared version of the library, which you do not appear to have" +- $echo "*** because the file extensions .$libext of this argument makes me believe" +- $echo "*** that it is just a static archive that I should not used here." +- else +- $echo +- $echo "*** Warning: Linking the shared library $output against the" +- $echo "*** static library $deplib is not portable!" +- deplibs="$deplib $deplibs" +- fi +- continue +- ;; +- prog) +- if test "$pass" != link; then +- deplibs="$deplib $deplibs" +- else +- compile_deplibs="$deplib $compile_deplibs" +- finalize_deplibs="$deplib $finalize_deplibs" +- fi +- continue +- ;; +- esac # linkmode +- ;; # *.$libext +- *.lo | *.$objext) +- if test "$pass" = conv; then +- deplibs="$deplib $deplibs" +- elif test "$linkmode" = prog; then +- if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then +- # If there is no dlopen support or we're linking statically, +- # we need to preload. +- newdlprefiles="$newdlprefiles $deplib" +- compile_deplibs="$deplib $compile_deplibs" +- finalize_deplibs="$deplib $finalize_deplibs" +- else +- newdlfiles="$newdlfiles $deplib" +- fi + fi +- continue +- ;; +- %DEPLIBS%) +- alldeplibs=yes +- continue +- ;; +- esac # case $deplib +- if test "$found" = yes || test -f "$lib"; then : +- else +- $echo "$modename: cannot find the library \`$lib' or unhandled argument \`$deplib'" 1>&2 +- exit $EXIT_FAILURE +- fi + +- # Check to see that this really is a libtool archive. +- if (${SED} -e '2q' $lib | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : +- else +- $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 +- exit $EXIT_FAILURE ++ # Do each command in the postinstall commands. ++ lib="$destdir/$realname" ++ func_execute_cmds "$postinstall_cmds" 'exit $?' + fi + +- ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'` +- test "X$ladir" = "X$lib" && ladir="." +- +- dlname= +- dlopen= +- dlpreopen= +- libdir= +- library_names= +- old_library= +- # If the library was installed with an old release of libtool, +- # it will not redefine variables installed, or shouldnotlink +- installed=yes +- shouldnotlink=no +- avoidtemprpath= ++ # Install the pseudo-library for information purposes. ++ func_basename "$file" ++ name="$func_basename_result" ++ instname="$dir/$name"i ++ func_show_eval "$install_prog $instname $destdir/$name" 'exit $?' + ++ # Maybe install the static library, too. ++ test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library" ++ ;; + +- # Read the .la file +- case $lib in +- */* | *\\*) . $lib ;; +- *) . ./$lib ;; +- esac ++ *.lo) ++ # Install (i.e. copy) a libtool object. + +- if test "$linkmode,$pass" = "lib,link" || +- test "$linkmode,$pass" = "prog,scan" || +- { test "$linkmode" != prog && test "$linkmode" != lib; }; then +- test -n "$dlopen" && dlfiles="$dlfiles $dlopen" +- test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen" ++ # Figure out destination file name, if it wasn't already specified. ++ if test -n "$destname"; then ++ destfile="$destdir/$destname" ++ else ++ func_basename "$file" ++ destfile="$func_basename_result" ++ destfile="$destdir/$destfile" + fi + +- if test "$pass" = conv; then +- # Only check for convenience libraries +- deplibs="$lib $deplibs" +- if test -z "$libdir"; then +- if test -z "$old_library"; then +- $echo "$modename: cannot find name of link library for \`$lib'" 1>&2 +- exit $EXIT_FAILURE +- fi +- # It is a libtool convenience library, so add in its objects. +- convenience="$convenience $ladir/$objdir/$old_library" +- old_convenience="$old_convenience $ladir/$objdir/$old_library" +- tmp_libs= +- for deplib in $dependency_libs; do +- deplibs="$deplib $deplibs" +- if test "X$duplicate_deps" = "Xyes" ; then +- case "$tmp_libs " in +- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; +- esac +- fi +- tmp_libs="$tmp_libs $deplib" +- done +- elif test "$linkmode" != prog && test "$linkmode" != lib; then +- $echo "$modename: \`$lib' is not a convenience library" 1>&2 +- exit $EXIT_FAILURE +- fi +- continue +- fi # $pass = conv ++ # Deduce the name of the destination old-style object file. ++ case $destfile in ++ *.lo) ++ func_lo2o "$destfile" ++ staticdest=$func_lo2o_result ++ ;; ++ *.$objext) ++ staticdest="$destfile" ++ destfile= ++ ;; ++ *) ++ func_fatal_help "cannot copy a libtool object to \`$destfile'" ++ ;; ++ esac + ++ # Install the libtool object if requested. ++ test -n "$destfile" && \ ++ func_show_eval "$install_prog $file $destfile" 'exit $?' + +- # Get the name of the library we link against. +- linklib= +- for l in $old_library $library_names; do +- linklib="$l" +- done +- if test -z "$linklib"; then +- $echo "$modename: cannot find name of link library for \`$lib'" 1>&2 +- exit $EXIT_FAILURE ++ # Install the old object if enabled. ++ if test "$build_old_libs" = yes; then ++ # Deduce the name of the old-style object file. ++ func_lo2o "$file" ++ staticobj=$func_lo2o_result ++ func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?' + fi ++ exit $EXIT_SUCCESS ++ ;; + +- # This library was specified with -dlopen. +- if test "$pass" = dlopen; then +- if test -z "$libdir"; then +- $echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2 +- exit $EXIT_FAILURE +- fi +- if test -z "$dlname" || +- test "$dlopen_support" != yes || +- test "$build_libtool_libs" = no; then +- # If there is no dlname, no dlopen support or we're linking +- # statically, we need to preload. We also need to preload any +- # dependent libraries so libltdl's deplib preloader doesn't +- # bomb out in the load deplibs phase. +- dlprefiles="$dlprefiles $lib $dependency_libs" +- else +- newdlfiles="$newdlfiles $lib" +- fi +- continue +- fi # $pass = dlopen ++ *) ++ # Figure out destination file name, if it wasn't already specified. ++ if test -n "$destname"; then ++ destfile="$destdir/$destname" ++ else ++ func_basename "$file" ++ destfile="$func_basename_result" ++ destfile="$destdir/$destfile" ++ fi + +- # We need an absolute path. +- case $ladir in +- [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;; ++ # If the file is missing, and there is a .exe on the end, strip it ++ # because it is most likely a libtool script we actually want to ++ # install ++ stripped_ext="" ++ case $file in ++ *.exe) ++ if test ! -f "$file"; then ++ func_stripname '' '.exe' "$file" ++ file=$func_stripname_result ++ stripped_ext=".exe" ++ fi ++ ;; ++ esac ++ ++ # Do a test to see if this is really a libtool program. ++ case $host in ++ *cygwin*|*mingw*) ++ if func_ltwrapper_executable_p "$file"; then ++ func_ltwrapper_scriptname "$file" ++ wrapper=$func_ltwrapper_scriptname_result ++ else ++ func_stripname '' '.exe' "$file" ++ wrapper=$func_stripname_result ++ fi ++ ;; + *) +- abs_ladir=`cd "$ladir" && pwd` +- if test -z "$abs_ladir"; then +- $echo "$modename: warning: cannot determine absolute directory name of \`$ladir'" 1>&2 +- $echo "$modename: passing it literally to the linker, although it might fail" 1>&2 +- abs_ladir="$ladir" ++ wrapper=$file ++ ;; ++ esac ++ if func_ltwrapper_script_p "$wrapper"; then ++ notinst_deplibs= ++ relink_command= ++ ++ func_source "$wrapper" ++ ++ # Check the variables that should have been set. ++ test -z "$generated_by_libtool_version" && \ ++ func_fatal_error "invalid libtool wrapper script \`$wrapper'" ++ ++ finalize=yes ++ for lib in $notinst_deplibs; do ++ # Check to see that each library is installed. ++ libdir= ++ if test -f "$lib"; then ++ func_source "$lib" ++ fi ++ libfile="$libdir/"`$ECHO "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test ++ if test -n "$libdir" && test ! -f "$libfile"; then ++ func_warning "\`$lib' has not been installed in \`$libdir'" ++ finalize=no ++ fi ++ done ++ ++ relink_command= ++ func_source "$wrapper" ++ ++ outputname= ++ if test "$fast_install" = no && test -n "$relink_command"; then ++ $opt_dry_run || { ++ if test "$finalize" = yes; then ++ tmpdir=`func_mktempdir` ++ func_basename "$file$stripped_ext" ++ file="$func_basename_result" ++ outputname="$tmpdir/$file" ++ # Replace the output file specification. ++ relink_command=`$ECHO "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'` ++ ++ $opt_silent || { ++ func_quote_for_expand "$relink_command" ++ eval "func_echo $func_quote_for_expand_result" ++ } ++ if eval "$relink_command"; then : ++ else ++ func_error "error: relink \`$file' with the above command before installing it" ++ $opt_dry_run || ${RM}r "$tmpdir" ++ continue ++ fi ++ file="$outputname" ++ else ++ func_warning "cannot relink \`$file'" ++ fi ++ } ++ else ++ # Install the binary that we compiled earlier. ++ file=`$ECHO "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"` + fi ++ fi ++ ++ # remove .exe since cygwin /usr/bin/install will append another ++ # one anyway ++ case $install_prog,$host in ++ */usr/bin/install*,*cygwin*) ++ case $file:$destfile in ++ *.exe:*.exe) ++ # this is ok ++ ;; ++ *.exe:*) ++ destfile=$destfile.exe ++ ;; ++ *:*.exe) ++ func_stripname '' '.exe' "$destfile" ++ destfile=$func_stripname_result ++ ;; ++ esac + ;; + esac +- laname=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` ++ func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?' ++ $opt_dry_run || if test -n "$outputname"; then ++ ${RM}r "$tmpdir" ++ fi ++ ;; ++ esac ++ done + +- # Find the relevant object directory and library name. +- if test "X$installed" = Xyes; then +- if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then +- $echo "$modename: warning: library \`$lib' was moved." 1>&2 +- dir="$ladir" +- absdir="$abs_ladir" +- libdir="$abs_ladir" +- else +- dir="$libdir" +- absdir="$libdir" ++ for file in $staticlibs; do ++ func_basename "$file" ++ name="$func_basename_result" ++ ++ # Set up the ranlib parameters. ++ oldlib="$destdir/$name" ++ ++ func_show_eval "$install_prog \$file \$oldlib" 'exit $?' ++ ++ if test -n "$stripme" && test -n "$old_striplib"; then ++ func_show_eval "$old_striplib $oldlib" 'exit $?' ++ fi ++ ++ # Do each command in the postinstall commands. ++ func_execute_cmds "$old_postinstall_cmds" 'exit $?' ++ done ++ ++ test -n "$future_libdirs" && \ ++ func_warning "remember to run \`$progname --finish$future_libdirs'" ++ ++ if test -n "$current_libdirs"; then ++ # Maybe just do a dry run. ++ $opt_dry_run && current_libdirs=" -n$current_libdirs" ++ exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs' ++ else ++ exit $EXIT_SUCCESS ++ fi ++} ++ ++test "$mode" = install && func_mode_install ${1+"$@"} ++ ++ ++# func_generate_dlsyms outputname originator pic_p ++# Extract symbols from dlprefiles and create ${outputname}S.o with ++# a dlpreopen symbol table. ++func_generate_dlsyms () ++{ ++ $opt_debug ++ my_outputname="$1" ++ my_originator="$2" ++ my_pic_p="${3-no}" ++ my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'` ++ my_dlsyms= ++ ++ if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then ++ if test -n "$NM" && test -n "$global_symbol_pipe"; then ++ my_dlsyms="${my_outputname}S.c" ++ else ++ func_error "not configured to extract global symbols from dlpreopened files" ++ fi ++ fi ++ ++ if test -n "$my_dlsyms"; then ++ case $my_dlsyms in ++ "") ;; ++ *.c) ++ # Discover the nlist of each of the dlfiles. ++ nlist="$output_objdir/${my_outputname}.nm" ++ ++ func_show_eval "$RM $nlist ${nlist}S ${nlist}T" ++ ++ # Parse the name list into a source file. ++ func_verbose "creating $output_objdir/$my_dlsyms" ++ ++ $opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\ ++/* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */ ++/* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */ ++ ++#ifdef __cplusplus ++extern \"C\" { ++#endif ++ ++/* External symbol declarations for the compiler. */\ ++" ++ ++ if test "$dlself" = yes; then ++ func_verbose "generating symbol list for \`$output'" ++ ++ $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist" ++ ++ # Add our own program objects to the symbol list. ++ progfiles=`$ECHO "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` ++ for progfile in $progfiles; do ++ func_verbose "extracting global C symbols from \`$progfile'" ++ $opt_dry_run || eval "$NM $progfile | $global_symbol_pipe >> '$nlist'" ++ done ++ ++ if test -n "$exclude_expsyms"; then ++ $opt_dry_run || { ++ eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' ++ eval '$MV "$nlist"T "$nlist"' ++ } + fi +- test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes +- else +- if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then +- dir="$ladir" +- absdir="$abs_ladir" +- # Remove this search path later +- notinst_path="$notinst_path $abs_ladir" ++ ++ if test -n "$export_symbols_regex"; then ++ $opt_dry_run || { ++ eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T' ++ eval '$MV "$nlist"T "$nlist"' ++ } ++ fi ++ ++ # Prepare the list of exported symbols ++ if test -z "$export_symbols"; then ++ export_symbols="$output_objdir/$outputname.exp" ++ $opt_dry_run || { ++ $RM $export_symbols ++ eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' ++ case $host in ++ *cygwin* | *mingw* ) ++ eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' ++ eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"' ++ ;; ++ esac ++ } + else +- dir="$ladir/$objdir" +- absdir="$abs_ladir/$objdir" +- # Remove this search path later +- notinst_path="$notinst_path $abs_ladir" ++ $opt_dry_run || { ++ eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"' ++ eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T' ++ eval '$MV "$nlist"T "$nlist"' ++ case $host in ++ *cygwin | *mingw* ) ++ eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' ++ eval 'cat "$nlist" >> "$output_objdir/$outputname.def"' ++ ;; ++ esac ++ } + fi +- fi # $installed = yes +- name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'` ++ fi + +- # This library was specified with -dlpreopen. +- if test "$pass" = dlpreopen; then +- if test -z "$libdir"; then +- $echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2 +- exit $EXIT_FAILURE ++ for dlprefile in $dlprefiles; do ++ func_verbose "extracting global C symbols from \`$dlprefile'" ++ func_basename "$dlprefile" ++ name="$func_basename_result" ++ $opt_dry_run || { ++ eval '$ECHO ": $name " >> "$nlist"' ++ eval "$NM $dlprefile 2>/dev/null | $global_symbol_pipe >> '$nlist'" ++ } ++ done ++ ++ $opt_dry_run || { ++ # Make sure we have at least an empty file. ++ test -f "$nlist" || : > "$nlist" ++ ++ if test -n "$exclude_expsyms"; then ++ $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T ++ $MV "$nlist"T "$nlist" + fi +- # Prefer using a static library (so that no silly _DYNAMIC symbols +- # are required to link). +- if test -n "$old_library"; then +- newdlprefiles="$newdlprefiles $dir/$old_library" +- # Otherwise, use the dlname, so that lt_dlopen finds it. +- elif test -n "$dlname"; then +- newdlprefiles="$newdlprefiles $dir/$dlname" ++ ++ # Try sorting and uniquifying the output. ++ if $GREP -v "^: " < "$nlist" | ++ if sort -k 3 /dev/null 2>&1; then ++ sort -k 3 ++ else ++ sort +2 ++ fi | ++ uniq > "$nlist"S; then ++ : + else +- newdlprefiles="$newdlprefiles $dir/$linklib" ++ $GREP -v "^: " < "$nlist" > "$nlist"S + fi +- fi # $pass = dlpreopen + +- if test -z "$libdir"; then +- # Link the convenience library +- if test "$linkmode" = lib; then +- deplibs="$dir/$old_library $deplibs" +- elif test "$linkmode,$pass" = "prog,link"; then +- compile_deplibs="$dir/$old_library $compile_deplibs" +- finalize_deplibs="$dir/$old_library $finalize_deplibs" ++ if test -f "$nlist"S; then ++ eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"' + else +- deplibs="$lib $deplibs" # used for prog,scan pass ++ $ECHO '/* NONE */' >> "$output_objdir/$my_dlsyms" + fi +- continue +- fi + ++ $ECHO >> "$output_objdir/$my_dlsyms" "\ + +- if test "$linkmode" = prog && test "$pass" != link; then +- newlib_search_path="$newlib_search_path $ladir" +- deplibs="$lib $deplibs" ++/* The mapping between symbol names and symbols. */ ++typedef struct { ++ const char *name; ++ void *address; ++} lt_dlsymlist; ++" ++ case $host in ++ *cygwin* | *mingw* ) ++ $ECHO >> "$output_objdir/$my_dlsyms" "\ ++/* DATA imports from DLLs on WIN32 con't be const, because ++ runtime relocations are performed -- see ld's documentation ++ on pseudo-relocs. */" ++ lt_dlsym_const= ;; ++ *osf5*) ++ echo >> "$output_objdir/$my_dlsyms" "\ ++/* This system does not cope well with relocations in const data */" ++ lt_dlsym_const= ;; ++ *) ++ lt_dlsym_const=const ;; ++ esac + +- linkalldeplibs=no +- if test "$link_all_deplibs" != no || test -z "$library_names" || +- test "$build_libtool_libs" = no; then +- linkalldeplibs=yes +- fi ++ $ECHO >> "$output_objdir/$my_dlsyms" "\ ++extern $lt_dlsym_const lt_dlsymlist ++lt_${my_prefix}_LTX_preloaded_symbols[]; ++$lt_dlsym_const lt_dlsymlist ++lt_${my_prefix}_LTX_preloaded_symbols[] = ++{\ ++ { \"$my_originator\", (void *) 0 }," + +- tmp_libs= +- for deplib in $dependency_libs; do +- case $deplib in +- -L*) newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`;; ### testsuite: skip nested quoting test +- esac +- # Need to link against all dependency_libs? +- if test "$linkalldeplibs" = yes; then +- deplibs="$deplib $deplibs" +- else +- # Need to hardcode shared library paths +- # or/and link against static libraries +- newdependency_libs="$deplib $newdependency_libs" +- fi +- if test "X$duplicate_deps" = "Xyes" ; then +- case "$tmp_libs " in +- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; +- esac +- fi +- tmp_libs="$tmp_libs $deplib" +- done # for deplib +- continue +- fi # $linkmode = prog... ++ case $need_lib_prefix in ++ no) ++ eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms" ++ ;; ++ *) ++ eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms" ++ ;; ++ esac ++ $ECHO >> "$output_objdir/$my_dlsyms" "\ ++ {0, (void *) 0} ++}; + +- if test "$linkmode,$pass" = "prog,link"; then +- if test -n "$library_names" && +- { { test "$prefer_static_libs" = no || +- test "$prefer_static_libs,$installed" = "built,yes"; } || +- test -z "$old_library"; }; then +- # We need to hardcode the library path +- if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then +- # Make sure the rpath contains only unique directories. +- case "$temp_rpath " in +- *" $dir "*) ;; +- *" $absdir "*) ;; +- *) temp_rpath="$temp_rpath $absdir" ;; +- esac +- fi ++/* This works around a problem in FreeBSD linker */ ++#ifdef FREEBSD_WORKAROUND ++static const void *lt_preloaded_setup() { ++ return lt_${my_prefix}_LTX_preloaded_symbols; ++} ++#endif + +- # Hardcode the library path. +- # Skip directories that are in the system default run-time +- # search path. +- case " $sys_lib_dlsearch_path " in +- *" $absdir "*) ;; +- *) +- case "$compile_rpath " in +- *" $absdir "*) ;; +- *) compile_rpath="$compile_rpath $absdir" +- esac +- ;; +- esac +- case " $sys_lib_dlsearch_path " in +- *" $libdir "*) ;; +- *) +- case "$finalize_rpath " in +- *" $libdir "*) ;; +- *) finalize_rpath="$finalize_rpath $libdir" +- esac +- ;; +- esac +- fi # $linkmode,$pass = prog,link... ++#ifdef __cplusplus ++} ++#endif\ ++" ++ } # !$opt_dry_run + +- if test "$alldeplibs" = yes && +- { test "$deplibs_check_method" = pass_all || +- { test "$build_libtool_libs" = yes && +- test -n "$library_names"; }; }; then +- # We only need to search for static libraries +- continue +- fi +- fi ++ pic_flag_for_symtable= ++ case "$compile_command " in ++ *" -static "*) ;; ++ *) ++ case $host in ++ # compiling the symbol table file with pic_flag works around ++ # a FreeBSD bug that causes programs to crash when -lm is ++ # linked before any other PIC object. But we must not use ++ # pic_flag when linking with -static. The problem exists in ++ # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1. ++ *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*) ++ pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;; ++ *-*-hpux*) ++ pic_flag_for_symtable=" $pic_flag" ;; ++ *) ++ if test "X$my_pic_p" != Xno; then ++ pic_flag_for_symtable=" $pic_flag" ++ fi ++ ;; ++ esac ++ ;; ++ esac ++ symtab_cflags= ++ for arg in $LTCFLAGS; do ++ case $arg in ++ -pie | -fpie | -fPIE) ;; ++ *) symtab_cflags="$symtab_cflags $arg" ;; ++ esac ++ done + +- link_static=no # Whether the deplib will be linked statically +- use_static_libs=$prefer_static_libs +- if test "$use_static_libs" = built && test "$installed" = yes ; then +- use_static_libs=no +- fi +- if test -n "$library_names" && +- { test "$use_static_libs" = no || test -z "$old_library"; }; then +- if test "$installed" = no; then +- notinst_deplibs="$notinst_deplibs $lib" +- need_relink=yes +- fi +- # This is a shared library ++ # Now compile the dynamic symbol file. ++ func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?' + +- # Warn about portability, can't link against -module's on +- # some systems (darwin) +- if test "$shouldnotlink" = yes && test "$pass" = link ; then +- $echo +- if test "$linkmode" = prog; then +- $echo "*** Warning: Linking the executable $output against the loadable module" +- else +- $echo "*** Warning: Linking the shared library $output against the loadable module" +- fi +- $echo "*** $linklib is not portable!" +- fi +- if test "$linkmode" = lib && +- test "$hardcode_into_libs" = yes; then +- # Hardcode the library path. +- # Skip directories that are in the system default run-time +- # search path. +- case " $sys_lib_dlsearch_path " in +- *" $absdir "*) ;; +- *) +- case "$compile_rpath " in +- *" $absdir "*) ;; +- *) compile_rpath="$compile_rpath $absdir" +- esac +- ;; +- esac +- case " $sys_lib_dlsearch_path " in +- *" $libdir "*) ;; +- *) +- case "$finalize_rpath " in +- *" $libdir "*) ;; +- *) finalize_rpath="$finalize_rpath $libdir" +- esac +- ;; +- esac ++ # Clean up the generated files. ++ func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"' ++ ++ # Transform the symbol file into the correct name. ++ symfileobj="$output_objdir/${my_outputname}S.$objext" ++ case $host in ++ *cygwin* | *mingw* ) ++ if test -f "$output_objdir/$my_outputname.def"; then ++ compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` ++ finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` ++ else ++ compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"` ++ finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"` + fi ++ ;; ++ *) ++ compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"` ++ finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"` ++ ;; ++ esac ++ ;; ++ *) ++ func_fatal_error "unknown suffix for \`$my_dlsyms'" ++ ;; ++ esac ++ else ++ # We keep going just in case the user didn't refer to ++ # lt_preloaded_symbols. The linker will fail if global_symbol_pipe ++ # really was required. ++ ++ # Nullify the symbol file. ++ compile_command=`$ECHO "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"` ++ finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"` ++ fi ++} + +- if test -n "$old_archive_from_expsyms_cmds"; then +- # figure out the soname +- set dummy $library_names +- realname="$2" +- shift; shift +- libname=`eval \\$echo \"$libname_spec\"` +- # use dlname if we got it. it's perfectly good, no? +- if test -n "$dlname"; then +- soname="$dlname" +- elif test -n "$soname_spec"; then +- # bleh windows +- case $host in +- *cygwin* | mingw*) +- major=`expr $current - $age` +- versuffix="-$major" +- ;; +- esac +- eval soname=\"$soname_spec\" +- else +- soname="$realname" +- fi ++# func_win32_libid arg ++# return the library type of file 'arg' ++# ++# Need a lot of goo to handle *both* DLLs and import libs ++# Has to be a shell function in order to 'eat' the argument ++# that is supplied when $file_magic_command is called. ++func_win32_libid () ++{ ++ $opt_debug ++ win32_libid_type="unknown" ++ win32_fileres=`file -L $1 2>/dev/null` ++ case $win32_fileres in ++ *ar\ archive\ import\ library*) # definitely import ++ win32_libid_type="x86 archive import" ++ ;; ++ *ar\ archive*) # could be an import, or static ++ if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | ++ $EGREP 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then ++ win32_nmres=`eval $NM -f posix -A $1 | ++ $SED -n -e ' ++ 1,100{ ++ / I /{ ++ s,.*,import, ++ p ++ q ++ } ++ }'` ++ case $win32_nmres in ++ import*) win32_libid_type="x86 archive import";; ++ *) win32_libid_type="x86 archive static";; ++ esac ++ fi ++ ;; ++ *DLL*) ++ win32_libid_type="x86 DLL" ++ ;; ++ *executable*) # but shell scripts are "executable" too... ++ case $win32_fileres in ++ *MS\ Windows\ PE\ Intel*) ++ win32_libid_type="x86 DLL" ++ ;; ++ esac ++ ;; ++ esac ++ $ECHO "$win32_libid_type" ++} + +- # Make a new name for the extract_expsyms_cmds to use +- soroot="$soname" +- soname=`$echo $soroot | ${SED} -e 's/^.*\///'` +- newlib="libimp-`$echo $soname | ${SED} 's/^lib//;s/\.dll$//'`.a" + +- # If the library has no export list, then create one now +- if test -f "$output_objdir/$soname-def"; then : +- else +- $show "extracting exported symbol list from \`$soname'" +- save_ifs="$IFS"; IFS='~' +- cmds=$extract_expsyms_cmds +- for cmd in $cmds; do +- IFS="$save_ifs" +- eval cmd=\"$cmd\" +- $show "$cmd" +- $run eval "$cmd" || exit $? +- done +- IFS="$save_ifs" +- fi + +- # Create $newlib +- if test -f "$output_objdir/$newlib"; then :; else +- $show "generating import library for \`$soname'" +- save_ifs="$IFS"; IFS='~' +- cmds=$old_archive_from_expsyms_cmds +- for cmd in $cmds; do +- IFS="$save_ifs" +- eval cmd=\"$cmd\" +- $show "$cmd" +- $run eval "$cmd" || exit $? +- done +- IFS="$save_ifs" +- fi +- # make sure the library variables are pointing to the new library +- dir=$output_objdir +- linklib=$newlib +- fi # test -n "$old_archive_from_expsyms_cmds" ++# func_extract_an_archive dir oldlib ++func_extract_an_archive () ++{ ++ $opt_debug ++ f_ex_an_ar_dir="$1"; shift ++ f_ex_an_ar_oldlib="$1" ++ func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" 'exit $?' ++ if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then ++ : ++ else ++ func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" ++ fi ++} + +- if test "$linkmode" = prog || test "$mode" != relink; then +- add_shlibpath= +- add_dir= +- add= +- lib_linked=yes +- case $hardcode_action in +- immediate | unsupported) +- if test "$hardcode_direct" = no; then +- add="$dir/$linklib" +- case $host in +- *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;; +- *-*-sysv4*uw2*) add_dir="-L$dir" ;; +- *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \ +- *-*-unixware7*) add_dir="-L$dir" ;; +- *-*-darwin* ) +- # if the lib is a module then we can not link against +- # it, someone is ignoring the new warnings I added +- if /usr/bin/file -L $add 2> /dev/null | +- $EGREP ": [^:]* bundle" >/dev/null ; then +- $echo "** Warning, lib $linklib is a module, not a shared library" +- if test -z "$old_library" ; then +- $echo +- $echo "** And there doesn't seem to be a static archive available" +- $echo "** The link will probably fail, sorry" +- else +- add="$dir/$old_library" +- fi +- fi +- esac +- elif test "$hardcode_minus_L" = no; then +- case $host in +- *-*-sunos*) add_shlibpath="$dir" ;; +- esac +- add_dir="-L$dir" +- add="-l$name" +- elif test "$hardcode_shlibpath_var" = no; then +- add_shlibpath="$dir" +- add="-l$name" +- else +- lib_linked=no +- fi +- ;; +- relink) +- if test "$hardcode_direct" = yes; then +- add="$dir/$linklib" +- elif test "$hardcode_minus_L" = yes; then +- add_dir="-L$dir" +- # Try looking first in the location we're being installed to. +- if test -n "$inst_prefix_dir"; then +- case $libdir in +- [\\/]*) +- add_dir="$add_dir -L$inst_prefix_dir$libdir" +- ;; +- esac +- fi +- add="-l$name" +- elif test "$hardcode_shlibpath_var" = yes; then +- add_shlibpath="$dir" +- add="-l$name" +- else +- lib_linked=no +- fi +- ;; +- *) lib_linked=no ;; +- esac + +- if test "$lib_linked" != yes; then +- $echo "$modename: configuration error: unsupported hardcode properties" +- exit $EXIT_FAILURE +- fi ++# func_extract_archives gentop oldlib ... ++func_extract_archives () ++{ ++ $opt_debug ++ my_gentop="$1"; shift ++ my_oldlibs=${1+"$@"} ++ my_oldobjs="" ++ my_xlib="" ++ my_xabs="" ++ my_xdir="" + +- if test -n "$add_shlibpath"; then +- case :$compile_shlibpath: in +- *":$add_shlibpath:"*) ;; +- *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;; +- esac +- fi +- if test "$linkmode" = prog; then +- test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs" +- test -n "$add" && compile_deplibs="$add $compile_deplibs" +- else +- test -n "$add_dir" && deplibs="$add_dir $deplibs" +- test -n "$add" && deplibs="$add $deplibs" +- if test "$hardcode_direct" != yes && \ +- test "$hardcode_minus_L" != yes && \ +- test "$hardcode_shlibpath_var" = yes; then +- case :$finalize_shlibpath: in +- *":$libdir:"*) ;; +- *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; +- esac +- fi +- fi +- fi ++ for my_xlib in $my_oldlibs; do ++ # Extract the objects. ++ case $my_xlib in ++ [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;; ++ *) my_xabs=`pwd`"/$my_xlib" ;; ++ esac ++ func_basename "$my_xlib" ++ my_xlib="$func_basename_result" ++ my_xlib_u=$my_xlib ++ while :; do ++ case " $extracted_archives " in ++ *" $my_xlib_u "*) ++ func_arith $extracted_serial + 1 ++ extracted_serial=$func_arith_result ++ my_xlib_u=lt$extracted_serial-$my_xlib ;; ++ *) break ;; ++ esac ++ done ++ extracted_archives="$extracted_archives $my_xlib_u" ++ my_xdir="$my_gentop/$my_xlib_u" + +- if test "$linkmode" = prog || test "$mode" = relink; then +- add_shlibpath= +- add_dir= +- add= +- # Finalize command for both is simple: just hardcode it. +- if test "$hardcode_direct" = yes; then +- add="$libdir/$linklib" +- elif test "$hardcode_minus_L" = yes; then +- add_dir="-L$libdir" +- add="-l$name" +- elif test "$hardcode_shlibpath_var" = yes; then +- case :$finalize_shlibpath: in +- *":$libdir:"*) ;; +- *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; +- esac +- add="-l$name" +- elif test "$hardcode_automatic" = yes; then +- if test -n "$inst_prefix_dir" && +- test -f "$inst_prefix_dir$libdir/$linklib" ; then +- add="$inst_prefix_dir$libdir/$linklib" +- else +- add="$libdir/$linklib" +- fi +- else +- # We cannot seem to hardcode it, guess we'll fake it. +- add_dir="-L$libdir" +- # Try looking first in the location we're being installed to. +- if test -n "$inst_prefix_dir"; then +- case $libdir in +- [\\/]*) +- add_dir="$add_dir -L$inst_prefix_dir$libdir" +- ;; +- esac +- fi +- add="-l$name" +- fi ++ func_mkdir_p "$my_xdir" + +- if test "$linkmode" = prog; then +- test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs" +- test -n "$add" && finalize_deplibs="$add $finalize_deplibs" +- else +- test -n "$add_dir" && deplibs="$add_dir $deplibs" +- test -n "$add" && deplibs="$add $deplibs" +- fi +- fi +- elif test "$linkmode" = prog; then +- # Here we assume that one of hardcode_direct or hardcode_minus_L +- # is not unsupported. This is valid on all known static and +- # shared platforms. +- if test "$hardcode_direct" != unsupported; then +- test -n "$old_library" && linklib="$old_library" +- compile_deplibs="$dir/$linklib $compile_deplibs" +- finalize_deplibs="$dir/$linklib $finalize_deplibs" ++ case $host in ++ *-darwin*) ++ func_verbose "Extracting $my_xabs" ++ # Do not bother doing anything if just a dry run ++ $opt_dry_run || { ++ darwin_orig_dir=`pwd` ++ cd $my_xdir || exit $? ++ darwin_archive=$my_xabs ++ darwin_curdir=`pwd` ++ darwin_base_archive=`basename "$darwin_archive"` ++ darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true` ++ if test -n "$darwin_arches"; then ++ darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'` ++ darwin_arch= ++ func_verbose "$darwin_base_archive has multiple architectures $darwin_arches" ++ for darwin_arch in $darwin_arches ; do ++ func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}" ++ $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}" ++ cd "unfat-$$/${darwin_base_archive}-${darwin_arch}" ++ func_extract_an_archive "`pwd`" "${darwin_base_archive}" ++ cd "$darwin_curdir" ++ $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" ++ done # $darwin_arches ++ ## Okay now we've a bunch of thin objects, gotta fatten them up :) ++ darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u` ++ darwin_file= ++ darwin_files= ++ for darwin_file in $darwin_filelist; do ++ darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP` ++ $LIPO -create -output "$darwin_file" $darwin_files ++ done # $darwin_filelist ++ $RM -rf unfat-$$ ++ cd "$darwin_orig_dir" + else +- compile_deplibs="-l$name -L$dir $compile_deplibs" +- finalize_deplibs="-l$name -L$dir $finalize_deplibs" +- fi +- elif test "$build_libtool_libs" = yes; then +- # Not a shared library +- if test "$deplibs_check_method" != pass_all; then +- # We're trying link a shared library against a static one +- # but the system doesn't support it. ++ cd $darwin_orig_dir ++ func_extract_an_archive "$my_xdir" "$my_xabs" ++ fi # $darwin_arches ++ } # !$opt_dry_run ++ ;; ++ *) ++ func_extract_an_archive "$my_xdir" "$my_xabs" ++ ;; ++ esac ++ my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP` ++ done + +- # Just print a warning and add the library to dependency_libs so +- # that the program can be linked against the static library. +- $echo +- $echo "*** Warning: This system can not link to static lib archive $lib." +- $echo "*** I have the capability to make that library automatically link in when" +- $echo "*** you link to this library. But I can only do this if you have a" +- $echo "*** shared version of the library, which you do not appear to have." +- if test "$module" = yes; then +- $echo "*** But as you try to build a module library, libtool will still create " +- $echo "*** a static module, that should work as long as the dlopening application" +- $echo "*** is linked with the -dlopen flag to resolve symbols at runtime." +- if test -z "$global_symbol_pipe"; then +- $echo +- $echo "*** However, this would only work if libtool was able to extract symbol" +- $echo "*** lists from a program, using \`nm' or equivalent, but libtool could" +- $echo "*** not find such a program. So, this module is probably useless." +- $echo "*** \`nm' from GNU binutils and a full rebuild may help." +- fi +- if test "$build_old_libs" = no; then +- build_libtool_libs=module +- build_old_libs=yes +- else +- build_libtool_libs=no +- fi +- fi +- else +- deplibs="$dir/$old_library $deplibs" +- link_static=yes +- fi +- fi # link shared/static library? ++ func_extract_archives_result="$my_oldobjs" ++} + +- if test "$linkmode" = lib; then +- if test -n "$dependency_libs" && +- { test "$hardcode_into_libs" != yes || +- test "$build_old_libs" = yes || +- test "$link_static" = yes; }; then +- # Extract -R from dependency_libs +- temp_deplibs= +- for libdir in $dependency_libs; do +- case $libdir in +- -R*) temp_xrpath=`$echo "X$libdir" | $Xsed -e 's/^-R//'` +- case " $xrpath " in +- *" $temp_xrpath "*) ;; +- *) xrpath="$xrpath $temp_xrpath";; +- esac;; +- *) temp_deplibs="$temp_deplibs $libdir";; +- esac +- done +- dependency_libs="$temp_deplibs" +- fi + +- newlib_search_path="$newlib_search_path $absdir" +- # Link against this library +- test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs" +- # ... and its dependency_libs +- tmp_libs= +- for deplib in $dependency_libs; do +- newdependency_libs="$deplib $newdependency_libs" +- if test "X$duplicate_deps" = "Xyes" ; then +- case "$tmp_libs " in +- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; +- esac +- fi +- tmp_libs="$tmp_libs $deplib" +- done + +- if test "$link_all_deplibs" != no; then +- # Add the search paths of all dependency libraries +- for deplib in $dependency_libs; do +- case $deplib in +- -L*) path="$deplib" ;; +- *.la) +- dir=`$echo "X$deplib" | $Xsed -e 's%/[^/]*$%%'` +- test "X$dir" = "X$deplib" && dir="." +- # We need an absolute path. +- case $dir in +- [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;; +- *) +- absdir=`cd "$dir" && pwd` +- if test -z "$absdir"; then +- $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2 +- absdir="$dir" +- fi +- ;; +- esac +- if grep "^installed=no" $deplib > /dev/null; then +- path="$absdir/$objdir" +- else +- eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` +- if test -z "$libdir"; then +- $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2 +- exit $EXIT_FAILURE +- fi +- if test "$absdir" != "$libdir"; then +- $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2 +- fi +- path="$absdir" +- fi +- depdepl= +- case $host in +- *-*-darwin*) +- # we do not want to link against static libs, +- # but need to link against shared +- eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib` +- eval deplibdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` +- if test -n "$deplibrary_names" ; then +- for tmp in $deplibrary_names ; do +- depdepl=$tmp +- done +- if test -f "$deplibdir/$depdepl" ; then +- depdepl="$deplibdir/$depdepl" +- elif test -f "$path/$depdepl" ; then +- depdepl="$path/$depdepl" +- else +- # Can't find it, oh well... +- depdepl= +- fi +- # do not add paths which are already there +- case " $newlib_search_path " in +- *" $path "*) ;; +- *) newlib_search_path="$newlib_search_path $path";; +- esac +- fi +- path="" +- ;; +- *) +- path="-L$path" +- ;; +- esac +- ;; +- -l*) +- case $host in +- *-*-darwin*) +- # Again, we only want to link against shared libraries +- eval tmp_libs=`$echo "X$deplib" | $Xsed -e "s,^\-l,,"` +- for tmp in $newlib_search_path ; do +- if test -f "$tmp/lib$tmp_libs.dylib" ; then +- eval depdepl="$tmp/lib$tmp_libs.dylib" +- break +- fi +- done +- path="" +- ;; +- *) continue ;; +- esac +- ;; +- *) continue ;; +- esac +- case " $deplibs " in +- *" $path "*) ;; +- *) deplibs="$path $deplibs" ;; +- esac +- case " $deplibs " in +- *" $depdepl "*) ;; +- *) deplibs="$depdepl $deplibs" ;; +- esac +- done +- fi # link_all_deplibs != no +- fi # linkmode = lib +- done # for deplib in $libs +- dependency_libs="$newdependency_libs" +- if test "$pass" = dlpreopen; then +- # Link the dlpreopened libraries before other libraries +- for deplib in $save_deplibs; do +- deplibs="$deplib $deplibs" +- done +- fi +- if test "$pass" != dlopen; then +- if test "$pass" != conv; then +- # Make sure lib_search_path contains only unique directories. +- lib_search_path= +- for dir in $newlib_search_path; do +- case "$lib_search_path " in +- *" $dir "*) ;; +- *) lib_search_path="$lib_search_path $dir" ;; +- esac +- done +- newlib_search_path= ++# func_emit_wrapper arg ++# ++# emit a libtool wrapper script on stdout ++# don't directly open a file because we may want to ++# incorporate the script contents within a cygwin/mingw ++# wrapper executable. Must ONLY be called from within ++# func_mode_link because it depends on a number of variable ++# set therein. ++# ++# arg is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR ++# variable will take. If 'yes', then the emitted script ++# will assume that the directory in which it is stored is ++# the '.lib' directory. This is a cygwin/mingw-specific ++# behavior. ++func_emit_wrapper () ++{ ++ func_emit_wrapper_arg1=no ++ if test -n "$1" ; then ++ func_emit_wrapper_arg1=$1 + fi + +- if test "$linkmode,$pass" != "prog,link"; then +- vars="deplibs" +- else +- vars="compile_deplibs finalize_deplibs" +- fi +- for var in $vars dependency_libs; do +- # Add libraries to $var in reverse order +- eval tmp_libs=\"\$$var\" +- new_libs= +- for deplib in $tmp_libs; do +- # FIXME: Pedantically, this is the right thing to do, so +- # that some nasty dependency loop isn't accidentally +- # broken: +- #new_libs="$deplib $new_libs" +- # Pragmatically, this seems to cause very few problems in +- # practice: +- case $deplib in +- -L*) new_libs="$deplib $new_libs" ;; +- -R*) ;; +- *) +- # And here is the reason: when a library appears more +- # than once as an explicit dependence of a library, or +- # is implicitly linked in more than once by the +- # compiler, it is considered special, and multiple +- # occurrences thereof are not removed. Compare this +- # with having the same library being listed as a +- # dependency of multiple other libraries: in this case, +- # we know (pedantically, we assume) the library does not +- # need to be listed more than once, so we keep only the +- # last copy. This is not always right, but it is rare +- # enough that we require users that really mean to play +- # such unportable linking tricks to link the library +- # using -Wl,-lname, so that libtool does not consider it +- # for duplicate removal. +- case " $specialdeplibs " in +- *" $deplib "*) new_libs="$deplib $new_libs" ;; +- *) +- case " $new_libs " in +- *" $deplib "*) ;; +- *) new_libs="$deplib $new_libs" ;; +- esac +- ;; +- esac +- ;; +- esac +- done +- tmp_libs= +- for deplib in $new_libs; do +- case $deplib in +- -L*) +- case " $tmp_libs " in +- *" $deplib "*) ;; +- *) tmp_libs="$tmp_libs $deplib" ;; +- esac +- ;; +- *) tmp_libs="$tmp_libs $deplib" ;; +- esac +- done +- eval $var=\"$tmp_libs\" +- done # for var +- fi +- # Last step: remove runtime libs from dependency_libs +- # (they stay in deplibs) +- tmp_libs= +- for i in $dependency_libs ; do +- case " $predeps $postdeps $compiler_lib_search_path " in +- *" $i "*) +- i="" +- ;; +- esac +- if test -n "$i" ; then +- tmp_libs="$tmp_libs $i" +- fi +- done +- dependency_libs=$tmp_libs +- done # for pass +- if test "$linkmode" = prog; then +- dlfiles="$newdlfiles" +- dlprefiles="$newdlprefiles" ++ $ECHO "\ ++#! $SHELL ++ ++# $output - temporary wrapper script for $objdir/$outputname ++# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION ++# ++# The $output program cannot be directly executed until all the libtool ++# libraries that it depends on are installed. ++# ++# This wrapper script should never be moved out of the build directory. ++# If it is, it will not operate correctly. ++ ++# Sed substitution that helps us do robust quoting. It backslashifies ++# metacharacters that are still active within double-quoted strings. ++Xsed='${SED} -e 1s/^X//' ++sed_quote_subst='$sed_quote_subst' ++ ++# Be Bourne compatible ++if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then ++ emulate sh ++ NULLCMD=: ++ # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which ++ # is contrary to our usage. Disable this feature. ++ alias -g '\${1+\"\$@\"}'='\"\$@\"' ++ setopt NO_GLOB_SUBST ++else ++ case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac ++fi ++BIN_SH=xpg4; export BIN_SH # for Tru64 ++DUALCASE=1; export DUALCASE # for MKS sh ++ ++# The HP-UX ksh and POSIX shell print the target directory to stdout ++# if CDPATH is set. ++(unset CDPATH) >/dev/null 2>&1 && unset CDPATH ++ ++relink_command=\"$relink_command\" ++ ++# This environment variable determines our operation mode. ++if test \"\$libtool_install_magic\" = \"$magic\"; then ++ # install mode needs the following variables: ++ generated_by_libtool_version='$macro_version' ++ notinst_deplibs='$notinst_deplibs' ++else ++ # When we are sourced in execute mode, \$file and \$ECHO are already set. ++ if test \"\$libtool_execute_magic\" != \"$magic\"; then ++ ECHO=\"$qecho\" ++ file=\"\$0\" ++ # Make sure echo works. ++ if test \"X\$1\" = X--no-reexec; then ++ # Discard the --no-reexec flag, and continue. ++ shift ++ elif test \"X\`{ \$ECHO '\t'; } 2>/dev/null\`\" = 'X\t'; then ++ # Yippee, \$ECHO works! ++ : ++ else ++ # Restart under the correct shell, and then maybe \$ECHO will work. ++ exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"} + fi ++ fi\ ++" ++ $ECHO "\ + +- case $linkmode in +- oldlib) +- case " $deplibs" in +- *\ -l* | *\ -L*) +- $echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2 ;; ++ # Find the directory that this script lives in. ++ thisdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\` ++ test \"x\$thisdir\" = \"x\$file\" && thisdir=. ++ ++ # Follow symbolic links until we get to the real thisdir. ++ file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\` ++ while test -n \"\$file\"; do ++ destdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\` ++ ++ # If there was a directory component, then change thisdir. ++ if test \"x\$destdir\" != \"x\$file\"; then ++ case \"\$destdir\" in ++ [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;; ++ *) thisdir=\"\$thisdir/\$destdir\" ;; + esac ++ fi + +- if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then +- $echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2 +- fi ++ file=\`\$ECHO \"X\$file\" | \$Xsed -e 's%^.*/%%'\` ++ file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\` ++ done + +- if test -n "$rpath"; then +- $echo "$modename: warning: \`-rpath' is ignored for archives" 1>&2 +- fi ++ # Usually 'no', except on cygwin/mingw when embedded into ++ # the cwrapper. ++ WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_arg1 ++ if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then ++ # special case for '.' ++ if test \"\$thisdir\" = \".\"; then ++ thisdir=\`pwd\` ++ fi ++ # remove .libs from thisdir ++ case \"\$thisdir\" in ++ *[\\\\/]$objdir ) thisdir=\`\$ECHO \"X\$thisdir\" | \$Xsed -e 's%[\\\\/][^\\\\/]*$%%'\` ;; ++ $objdir ) thisdir=. ;; ++ esac ++ fi + +- if test -n "$xrpath"; then +- $echo "$modename: warning: \`-R' is ignored for archives" 1>&2 +- fi ++ # Try to get the absolute directory name. ++ absdir=\`cd \"\$thisdir\" && pwd\` ++ test -n \"\$absdir\" && thisdir=\"\$absdir\" ++" + +- if test -n "$vinfo"; then +- $echo "$modename: warning: \`-version-info/-version-number' is ignored for archives" 1>&2 +- fi ++ if test "$fast_install" = yes; then ++ $ECHO "\ ++ program=lt-'$outputname'$exeext ++ progdir=\"\$thisdir/$objdir\" + +- if test -n "$release"; then +- $echo "$modename: warning: \`-release' is ignored for archives" 1>&2 +- fi ++ if test ! -f \"\$progdir/\$program\" || ++ { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\ ++ test \"X\$file\" != \"X\$progdir/\$program\"; }; then + +- if test -n "$export_symbols" || test -n "$export_symbols_regex"; then +- $echo "$modename: warning: \`-export-symbols' is ignored for archives" 1>&2 +- fi ++ file=\"\$\$-\$program\" + +- # Now set the variables for building old libraries. +- build_libtool_libs=no +- oldlibs="$output" +- objs="$objs$old_deplibs" +- ;; ++ if test ! -d \"\$progdir\"; then ++ $MKDIR \"\$progdir\" ++ else ++ $RM \"\$progdir/\$file\" ++ fi" + +- lib) +- # Make sure we only generate libraries of the form `libNAME.la'. +- case $outputname in +- lib*) +- name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'` +- eval shared_ext=\"$shrext_cmds\" +- eval libname=\"$libname_spec\" +- ;; +- *) +- if test "$module" = no; then +- $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2 +- $echo "$help" 1>&2 +- exit $EXIT_FAILURE +- fi +- if test "$need_lib_prefix" != no; then +- # Add the "lib" prefix for modules if required +- name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'` +- eval shared_ext=\"$shrext_cmds\" +- eval libname=\"$libname_spec\" +- else +- libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'` +- fi +- ;; +- esac ++ $ECHO "\ + +- if test -n "$objs"; then +- if test "$deplibs_check_method" != pass_all; then +- $echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1 +- exit $EXIT_FAILURE ++ # relink executable if necessary ++ if test -n \"\$relink_command\"; then ++ if relink_command_output=\`eval \$relink_command 2>&1\`; then : ++ else ++ $ECHO \"\$relink_command_output\" >&2 ++ $RM \"\$progdir/\$file\" ++ exit 1 ++ fi ++ fi ++ ++ $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null || ++ { $RM \"\$progdir/\$program\"; ++ $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; } ++ $RM \"\$progdir/\$file\" ++ fi" + else +- $echo +- $echo "*** Warning: Linking the shared library $output against the non-libtool" +- $echo "*** objects $objs is not portable!" +- libobjs="$libobjs $objs" ++ $ECHO "\ ++ program='$outputname' ++ progdir=\"\$thisdir/$objdir\" ++" + fi +- fi + +- if test "$dlself" != no; then +- $echo "$modename: warning: \`-dlopen self' is ignored for libtool libraries" 1>&2 +- fi ++ $ECHO "\ + +- set dummy $rpath +- if test "$#" -gt 2; then +- $echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2 +- fi +- install_libdir="$2" ++ if test -f \"\$progdir/\$program\"; then" + +- oldlibs= +- if test -z "$rpath"; then +- if test "$build_libtool_libs" = yes; then +- # Building a libtool convenience library. +- # Some compilers have problems with a `.al' extension so +- # convenience libraries should have the same extension an +- # archive normally would. +- oldlibs="$output_objdir/$libname.$libext $oldlibs" +- build_libtool_libs=convenience +- build_old_libs=yes +- fi ++ # Export our shlibpath_var if we have one. ++ if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then ++ $ECHO "\ ++ # Add our own library path to $shlibpath_var ++ $shlibpath_var=\"$temp_rpath\$$shlibpath_var\" ++ ++ # Some systems cannot cope with colon-terminated $shlibpath_var ++ # The second colon is a workaround for a bug in BeOS R4 sed ++ $shlibpath_var=\`\$ECHO \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\` + +- if test -n "$vinfo"; then +- $echo "$modename: warning: \`-version-info/-version-number' is ignored for convenience libraries" 1>&2 ++ export $shlibpath_var ++" + fi + +- if test -n "$release"; then +- $echo "$modename: warning: \`-release' is ignored for convenience libraries" 1>&2 ++ # fixup the dll searchpath if we need to. ++ if test -n "$dllsearchpath"; then ++ $ECHO "\ ++ # Add the dll search path components to the executable PATH ++ PATH=$dllsearchpath:\$PATH ++" + fi +- else + +- # Parse the version information argument. +- save_ifs="$IFS"; IFS=':' +- set dummy $vinfo 0 0 0 +- IFS="$save_ifs" ++ $ECHO "\ ++ if test \"\$libtool_execute_magic\" != \"$magic\"; then ++ # Run the actual program with our arguments. ++" ++ case $host in ++ # Backslashes separate directories on plain windows ++ *-*-mingw | *-*-os2*) ++ $ECHO "\ ++ exec \"\$progdir\\\\\$program\" \${1+\"\$@\"} ++" ++ ;; + +- if test -n "$8"; then +- $echo "$modename: too many parameters to \`-version-info'" 1>&2 +- $echo "$help" 1>&2 +- exit $EXIT_FAILURE +- fi ++ *) ++ $ECHO "\ ++ exec \"\$progdir/\$program\" \${1+\"\$@\"} ++" ++ ;; ++ esac ++ $ECHO "\ ++ \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2 ++ exit 1 ++ fi ++ else ++ # The program doesn't exist. ++ \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2 ++ \$ECHO \"This script is just a wrapper for \$program.\" 1>&2 ++ $ECHO \"See the $PACKAGE documentation for more information.\" 1>&2 ++ exit 1 ++ fi ++fi\ ++" ++} ++# end: func_emit_wrapper + +- # convert absolute version numbers to libtool ages +- # this retains compatibility with .la files and attempts +- # to make the code below a bit more comprehensible ++# func_emit_cwrapperexe_src ++# emit the source code for a wrapper executable on stdout ++# Must ONLY be called from within func_mode_link because ++# it depends on a number of variable set therein. ++func_emit_cwrapperexe_src () ++{ ++ cat <&2 +- $echo "$modename: \`$vinfo' is not valid version information" 1>&2 +- exit $EXIT_FAILURE +- ;; +- esac ++ The $output program cannot be directly executed until all the libtool ++ libraries that it depends on are installed. + +- case $revision in +- 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; +- *) +- $echo "$modename: REVISION \`$revision' must be a nonnegative integer" 1>&2 +- $echo "$modename: \`$vinfo' is not valid version information" 1>&2 +- exit $EXIT_FAILURE +- ;; +- esac ++ This wrapper executable should never be moved out of the build directory. ++ If it is, it will not operate correctly. + +- case $age in +- 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; +- *) +- $echo "$modename: AGE \`$age' must be a nonnegative integer" 1>&2 +- $echo "$modename: \`$vinfo' is not valid version information" 1>&2 +- exit $EXIT_FAILURE +- ;; +- esac ++ Currently, it simply execs the wrapper *script* "$SHELL $output", ++ but could eventually absorb all of the scripts functionality and ++ exec $objdir/$outputname directly. ++*/ ++EOF ++ cat <<"EOF" ++#include ++#include ++#ifdef _MSC_VER ++# include ++# include ++# include ++# define setmode _setmode ++#else ++# include ++# include ++# ifdef __CYGWIN__ ++# include ++# endif ++#endif ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include + +- if test "$age" -gt "$current"; then +- $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2 +- $echo "$modename: \`$vinfo' is not valid version information" 1>&2 +- exit $EXIT_FAILURE +- fi ++#if defined(PATH_MAX) ++# define LT_PATHMAX PATH_MAX ++#elif defined(MAXPATHLEN) ++# define LT_PATHMAX MAXPATHLEN ++#else ++# define LT_PATHMAX 1024 ++#endif + +- # Calculate the version variables. +- major= +- versuffix= +- verstring= +- case $version_type in +- none) ;; ++#ifndef S_IXOTH ++# define S_IXOTH 0 ++#endif ++#ifndef S_IXGRP ++# define S_IXGRP 0 ++#endif + +- darwin) +- # Like Linux, but with the current version available in +- # verstring for coding it into the library header +- major=.`expr $current - $age` +- versuffix="$major.$age.$revision" +- # Darwin ld doesn't like 0 for these options... +- minor_current=`expr $current + 1` +- xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision" +- verstring="-compatibility_version $minor_current -current_version $minor_current.$revision" +- ;; ++#ifdef _MSC_VER ++# define S_IXUSR _S_IEXEC ++# define stat _stat ++# ifndef _INTPTR_T_DEFINED ++# define intptr_t int ++# endif ++#endif + +- freebsd-aout) +- major=".$current" +- versuffix=".$current.$revision"; +- ;; ++#ifndef DIR_SEPARATOR ++# define DIR_SEPARATOR '/' ++# define PATH_SEPARATOR ':' ++#endif + +- freebsd-elf) +- major=".$current" +- versuffix=".$current"; +- ;; ++#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \ ++ defined (__OS2__) ++# define HAVE_DOS_BASED_FILE_SYSTEM ++# define FOPEN_WB "wb" ++# ifndef DIR_SEPARATOR_2 ++# define DIR_SEPARATOR_2 '\\' ++# endif ++# ifndef PATH_SEPARATOR_2 ++# define PATH_SEPARATOR_2 ';' ++# endif ++#endif + +- irix | nonstopux) +- if test "X$lt_irix_increment" = "Xno"; then +- major=`expr $current - $age` +- else +- major=`expr $current - $age + 1` +- fi +- case $version_type in +- nonstopux) verstring_prefix=nonstopux ;; +- *) verstring_prefix=sgi ;; +- esac +- verstring="$verstring_prefix$major.$revision" ++#ifndef DIR_SEPARATOR_2 ++# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR) ++#else /* DIR_SEPARATOR_2 */ ++# define IS_DIR_SEPARATOR(ch) \ ++ (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2)) ++#endif /* DIR_SEPARATOR_2 */ + +- # Add in all the interfaces that we are compatible with. +- loop=$revision +- while test "$loop" -ne 0; do +- iface=`expr $revision - $loop` +- loop=`expr $loop - 1` +- verstring="$verstring_prefix$major.$iface:$verstring" +- done ++#ifndef PATH_SEPARATOR_2 ++# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR) ++#else /* PATH_SEPARATOR_2 */ ++# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2) ++#endif /* PATH_SEPARATOR_2 */ + +- # Before this point, $major must not contain `.'. +- major=.$major +- versuffix="$major.$revision" +- ;; ++#ifdef __CYGWIN__ ++# define FOPEN_WB "wb" ++#endif + +- linux) +- major=.`expr $current - $age` +- versuffix="$major.$age.$revision" +- ;; ++#ifndef FOPEN_WB ++# define FOPEN_WB "w" ++#endif ++#ifndef _O_BINARY ++# define _O_BINARY 0 ++#endif + +- osf) +- major=.`expr $current - $age` +- versuffix=".$current.$age.$revision" +- verstring="$current.$age.$revision" ++#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type))) ++#define XFREE(stale) do { \ ++ if (stale) { free ((void *) stale); stale = 0; } \ ++} while (0) + +- # Add in all the interfaces that we are compatible with. +- loop=$age +- while test "$loop" -ne 0; do +- iface=`expr $current - $loop` +- loop=`expr $loop - 1` +- verstring="$verstring:${iface}.0" +- done ++#undef LTWRAPPER_DEBUGPRINTF ++#if defined DEBUGWRAPPER ++# define LTWRAPPER_DEBUGPRINTF(args) ltwrapper_debugprintf args ++static void ++ltwrapper_debugprintf (const char *fmt, ...) ++{ ++ va_list args; ++ va_start (args, fmt); ++ (void) vfprintf (stderr, fmt, args); ++ va_end (args); ++} ++#else ++# define LTWRAPPER_DEBUGPRINTF(args) ++#endif + +- # Make executables depend on our current version. +- verstring="$verstring:${current}.0" +- ;; ++const char *program_name = NULL; + +- sunos) +- major=".$current" +- versuffix=".$current.$revision" +- ;; ++void *xmalloc (size_t num); ++char *xstrdup (const char *string); ++const char *base_name (const char *name); ++char *find_executable (const char *wrapper); ++char *chase_symlinks (const char *pathspec); ++int make_executable (const char *path); ++int check_executable (const char *path); ++char *strendzap (char *str, const char *pat); ++void lt_fatal (const char *message, ...); + +- windows) +- # Use '-' rather than '.', since we only want one +- # extension on DOS 8.3 filesystems. +- major=`expr $current - $age` +- versuffix="-$major" +- ;; ++static const char *script_text = ++EOF + +- *) +- $echo "$modename: unknown library version type \`$version_type'" 1>&2 +- $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 +- exit $EXIT_FAILURE +- ;; +- esac ++ func_emit_wrapper yes | ++ $SED -e 's/\([\\"]\)/\\\1/g' \ ++ -e 's/^/ "/' -e 's/$/\\n"/' ++ echo ";" + +- # Clear the version info if we defaulted, and they specified a release. +- if test -z "$vinfo" && test -n "$release"; then +- major= +- case $version_type in +- darwin) +- # we can't check for "0.0" in archive_cmds due to quoting +- # problems, so we reset it completely +- verstring= +- ;; +- *) +- verstring="0.0" +- ;; +- esac +- if test "$need_version" = no; then +- versuffix= +- else +- versuffix=".0.0" +- fi +- fi ++ cat <&2 +- build_libtool_libs=no +- build_old_libs=yes +- fi +- else +- # Don't allow undefined symbols. +- allow_undefined_flag="$no_undefined_flag" +- fi +- fi ++ const char *dumpscript_opt = "--lt-dump-script"; ++ int i; + +- if test "$mode" != relink; then +- # Remove our outputs, but don't remove object files since they +- # may have been created when compiling PIC objects. +- removelist= +- tempremovelist=`$echo "$output_objdir/*"` +- for p in $tempremovelist; do +- case $p in +- *.$objext) +- ;; +- $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*) +- if test "X$precious_files_regex" != "X"; then +- if echo $p | $EGREP -e "$precious_files_regex" >/dev/null 2>&1 +- then +- continue +- fi +- fi +- removelist="$removelist $p" +- ;; +- *) ;; +- esac +- done +- if test -n "$removelist"; then +- $show "${rm}r $removelist" +- $run ${rm}r $removelist +- fi +- fi ++ program_name = (char *) xstrdup (base_name (argv[0])); ++ LTWRAPPER_DEBUGPRINTF (("(main) argv[0] : %s\n", argv[0])); ++ LTWRAPPER_DEBUGPRINTF (("(main) program_name : %s\n", program_name)); + +- # Now set the variables for building old libraries. +- if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then +- oldlibs="$oldlibs $output_objdir/$libname.$libext" ++ /* very simple arg parsing; don't want to rely on getopt */ ++ for (i = 1; i < argc; i++) ++ { ++ if (strcmp (argv[i], dumpscript_opt) == 0) ++ { ++EOF ++ case "$host" in ++ *mingw* | *cygwin* ) ++ # make stdout use "unix" line endings ++ echo " setmode(1,_O_BINARY);" ++ ;; ++ esac + +- # Transform .lo files to .o files. +- oldobjs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP` +- fi ++ cat </dev/null || echo $SHELL` ++ case $lt_newargv0 in ++ *.exe | *.EXE) ;; ++ *) lt_newargv0=$lt_newargv0.exe ;; ++ esac ++ ;; ++ * ) lt_newargv0=$SHELL ;; ++ esac ++ fi + +- # Make sure dlfiles contains only unique files that won't be dlpreopened +- old_dlfiles="$dlfiles" +- dlfiles= +- for lib in $old_dlfiles; do +- case " $dlprefiles $dlfiles " in +- *" $lib "*) ;; +- *) dlfiles="$dlfiles $lib" ;; +- esac +- done ++ cat < conftest.c <= 0) ++ && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH))) ++ return 1; ++ else ++ return 0; ++} ++ ++int ++make_executable (const char *path) ++{ ++ int rval = 0; ++ struct stat st; ++ ++ LTWRAPPER_DEBUGPRINTF (("(make_executable) : %s\n", ++ path ? (*path ? path : "EMPTY!") : "NULL!")); ++ if ((!path) || (!*path)) ++ return 0; ++ ++ if (stat (path, &st) >= 0) ++ { ++ rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR); ++ } ++ return rval; ++} ++ ++/* Searches for the full path of the wrapper. Returns ++ newly allocated full path name if found, NULL otherwise ++ Does not chase symlinks, even on platforms that support them. ++*/ ++char * ++find_executable (const char *wrapper) ++{ ++ int has_slash = 0; ++ const char *p; ++ const char *p_next; ++ /* static buffer for getcwd */ ++ char tmp[LT_PATHMAX + 1]; ++ int tmp_len; ++ char *concat_name; ++ ++ LTWRAPPER_DEBUGPRINTF (("(find_executable) : %s\n", ++ wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!")); ++ ++ if ((wrapper == NULL) || (*wrapper == '\0')) ++ return NULL; ++ ++ /* Absolute path? */ ++#if defined (HAVE_DOS_BASED_FILE_SYSTEM) ++ if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':') ++ { ++ concat_name = xstrdup (wrapper); ++ if (check_executable (concat_name)) ++ return concat_name; ++ XFREE (concat_name); ++ } ++ else ++ { ++#endif ++ if (IS_DIR_SEPARATOR (wrapper[0])) ++ { ++ concat_name = xstrdup (wrapper); ++ if (check_executable (concat_name)) ++ return concat_name; ++ XFREE (concat_name); ++ } ++#if defined (HAVE_DOS_BASED_FILE_SYSTEM) ++ } ++#endif ++ ++ for (p = wrapper; *p; p++) ++ if (*p == '/') ++ { ++ has_slash = 1; ++ break; ++ } ++ if (!has_slash) ++ { ++ /* no slashes; search PATH */ ++ const char *path = getenv ("PATH"); ++ if (path != NULL) ++ { ++ for (p = path; *p; p = p_next) ++ { ++ const char *q; ++ size_t p_len; ++ for (q = p; *q; q++) ++ if (IS_PATH_SEPARATOR (*q)) ++ break; ++ p_len = q - p; ++ p_next = (*q == '\0' ? q : q + 1); ++ if (p_len == 0) ++ { ++ /* empty path: current directory */ ++ if (getcwd (tmp, LT_PATHMAX) == NULL) ++ lt_fatal ("getcwd failed"); ++ tmp_len = strlen (tmp); ++ concat_name = ++ XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); ++ memcpy (concat_name, tmp, tmp_len); ++ concat_name[tmp_len] = '/'; ++ strcpy (concat_name + tmp_len + 1, wrapper); ++ } + else +- newdeplibs="$newdeplibs $i" +- fi +- done +- else +- # Error occurred in the first compile. Let's try to salvage +- # the situation: Compile a separate program for each library. +- for i in $deplibs; do +- name=`expr $i : '-l\(.*\)'` +- # If $name is empty we are operating on a -L argument. +- if test "$name" != "" && test "$name" != "0"; then +- $rm conftest +- if $LTCC $LTCFLAGS -o conftest conftest.c $i; then +- ldd_output=`ldd conftest` +- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then +- case " $predeps $postdeps " in +- *" $i "*) +- newdeplibs="$newdeplibs $i" +- i="" +- ;; +- esac +- fi +- if test -n "$i" ; then +- libname=`eval \\$echo \"$libname_spec\"` +- deplib_matches=`eval \\$echo \"$library_names_spec\"` +- set dummy $deplib_matches +- deplib_match=$2 +- if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then +- newdeplibs="$newdeplibs $i" +- else +- droppeddeps=yes +- $echo +- $echo "*** Warning: dynamic linker does not accept needed library $i." +- $echo "*** I have the capability to make that library automatically link in when" +- $echo "*** you link to this library. But I can only do this if you have a" +- $echo "*** shared version of the library, which you do not appear to have" +- $echo "*** because a test_compile did reveal that the linker did not use this one" +- $echo "*** as a dynamic dependency that programs can get resolved with at runtime." +- fi +- fi +- else +- droppeddeps=yes +- $echo +- $echo "*** Warning! Library $i is needed by this library but I was not able to" +- $echo "*** make it link in! You will probably need to install it or some" +- $echo "*** library that it depends on before this library will be fully" +- $echo "*** functional. Installing it before continuing would be even better." +- fi +- else +- newdeplibs="$newdeplibs $i" +- fi +- done +- fi +- ;; +- file_magic*) +- set dummy $deplibs_check_method +- file_magic_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"` +- for a_deplib in $deplibs; do +- name=`expr $a_deplib : '-l\(.*\)'` +- # If $name is empty we are operating on a -L argument. +- if test "$name" != "" && test "$name" != "0"; then +- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then +- case " $predeps $postdeps " in +- *" $a_deplib "*) +- newdeplibs="$newdeplibs $a_deplib" +- a_deplib="" +- ;; +- esac +- fi +- if test -n "$a_deplib" ; then +- libname=`eval \\$echo \"$libname_spec\"` +- for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do +- potential_libs=`ls $i/$libname[.-]* 2>/dev/null` +- for potent_lib in $potential_libs; do +- # Follow soft links. +- if ls -lLd "$potent_lib" 2>/dev/null \ +- | grep " -> " >/dev/null; then +- continue +- fi +- # The statement above tries to avoid entering an +- # endless loop below, in case of cyclic links. +- # We might still enter an endless loop, since a link +- # loop can be closed while we follow links, +- # but so what? +- potlib="$potent_lib" +- while test -h "$potlib" 2>/dev/null; do +- potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'` +- case $potliblink in +- [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";; +- *) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";; +- esac +- done +- if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \ +- | ${SED} 10q \ +- | $EGREP "$file_magic_regex" > /dev/null; then +- newdeplibs="$newdeplibs $a_deplib" +- a_deplib="" +- break 2 +- fi +- done +- done +- fi +- if test -n "$a_deplib" ; then +- droppeddeps=yes +- $echo +- $echo "*** Warning: linker path does not have real file for library $a_deplib." +- $echo "*** I have the capability to make that library automatically link in when" +- $echo "*** you link to this library. But I can only do this if you have a" +- $echo "*** shared version of the library, which you do not appear to have" +- $echo "*** because I did check the linker path looking for a file starting" +- if test -z "$potlib" ; then +- $echo "*** with $libname but no candidates were found. (...for file magic test)" +- else +- $echo "*** with $libname and none of the candidates passed a file format test" +- $echo "*** using a file magic. Last file checked: $potlib" +- fi +- fi +- else +- # Add a -L argument. +- newdeplibs="$newdeplibs $a_deplib" +- fi +- done # Gone through all deplibs. +- ;; +- match_pattern*) +- set dummy $deplibs_check_method +- match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"` +- for a_deplib in $deplibs; do +- name=`expr $a_deplib : '-l\(.*\)'` +- # If $name is empty we are operating on a -L argument. +- if test -n "$name" && test "$name" != "0"; then +- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then +- case " $predeps $postdeps " in +- *" $a_deplib "*) +- newdeplibs="$newdeplibs $a_deplib" +- a_deplib="" +- ;; +- esac +- fi +- if test -n "$a_deplib" ; then +- libname=`eval \\$echo \"$libname_spec\"` +- for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do +- potential_libs=`ls $i/$libname[.-]* 2>/dev/null` +- for potent_lib in $potential_libs; do +- potlib="$potent_lib" # see symlink-check above in file_magic test +- if eval $echo \"$potent_lib\" 2>/dev/null \ +- | ${SED} 10q \ +- | $EGREP "$match_pattern_regex" > /dev/null; then +- newdeplibs="$newdeplibs $a_deplib" +- a_deplib="" +- break 2 +- fi +- done +- done +- fi +- if test -n "$a_deplib" ; then +- droppeddeps=yes +- $echo +- $echo "*** Warning: linker path does not have real file for library $a_deplib." +- $echo "*** I have the capability to make that library automatically link in when" +- $echo "*** you link to this library. But I can only do this if you have a" +- $echo "*** shared version of the library, which you do not appear to have" +- $echo "*** because I did check the linker path looking for a file starting" +- if test -z "$potlib" ; then +- $echo "*** with $libname but no candidates were found. (...for regex pattern test)" +- else +- $echo "*** with $libname and none of the candidates passed a file format test" +- $echo "*** using a regex pattern. Last file checked: $potlib" +- fi +- fi +- else +- # Add a -L argument. +- newdeplibs="$newdeplibs $a_deplib" +- fi +- done # Gone through all deplibs. +- ;; +- none | unknown | *) +- newdeplibs="" +- tmp_deplibs=`$echo "X $deplibs" | $Xsed -e 's/ -lc$//' \ +- -e 's/ -[LR][^ ]*//g'` +- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then +- for i in $predeps $postdeps ; do +- # can't use Xsed below, because $i might contain '/' +- tmp_deplibs=`$echo "X $tmp_deplibs" | ${SED} -e "1s,^X,," -e "s,$i,,"` +- done +- fi +- if $echo "X $tmp_deplibs" | $Xsed -e 's/[ ]//g' \ +- | grep . >/dev/null; then +- $echo +- if test "X$deplibs_check_method" = "Xnone"; then +- $echo "*** Warning: inter-library dependencies are not supported in this platform." +- else +- $echo "*** Warning: inter-library dependencies are not known to be supported." +- fi +- $echo "*** All declared inter-library dependencies are being dropped." +- droppeddeps=yes +- fi +- ;; +- esac +- versuffix=$versuffix_save +- major=$major_save +- release=$release_save +- libname=$libname_save +- name=$name_save +- +- case $host in +- *-*-rhapsody* | *-*-darwin1.[012]) +- # On Rhapsody replace the C library is the System framework +- newdeplibs=`$echo "X $newdeplibs" | $Xsed -e 's/ -lc / -framework System /'` +- ;; +- esac ++ { ++ concat_name = ++ XMALLOC (char, p_len + 1 + strlen (wrapper) + 1); ++ memcpy (concat_name, p, p_len); ++ concat_name[p_len] = '/'; ++ strcpy (concat_name + p_len + 1, wrapper); ++ } ++ if (check_executable (concat_name)) ++ return concat_name; ++ XFREE (concat_name); ++ } ++ } ++ /* not found in PATH; assume curdir */ ++ } ++ /* Relative path | not found in path: prepend cwd */ ++ if (getcwd (tmp, LT_PATHMAX) == NULL) ++ lt_fatal ("getcwd failed"); ++ tmp_len = strlen (tmp); ++ concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); ++ memcpy (concat_name, tmp, tmp_len); ++ concat_name[tmp_len] = '/'; ++ strcpy (concat_name + tmp_len + 1, wrapper); + +- if test "$droppeddeps" = yes; then +- if test "$module" = yes; then +- $echo +- $echo "*** Warning: libtool could not satisfy all declared inter-library" +- $echo "*** dependencies of module $libname. Therefore, libtool will create" +- $echo "*** a static module, that should work as long as the dlopening" +- $echo "*** application is linked with the -dlopen flag." +- if test -z "$global_symbol_pipe"; then +- $echo +- $echo "*** However, this would only work if libtool was able to extract symbol" +- $echo "*** lists from a program, using \`nm' or equivalent, but libtool could" +- $echo "*** not find such a program. So, this module is probably useless." +- $echo "*** \`nm' from GNU binutils and a full rebuild may help." +- fi +- if test "$build_old_libs" = no; then +- oldlibs="$output_objdir/$libname.$libext" +- build_libtool_libs=module +- build_old_libs=yes +- else +- build_libtool_libs=no +- fi +- else +- $echo "*** The inter-library dependencies that have been dropped here will be" +- $echo "*** automatically added whenever a program is linked with this library" +- $echo "*** or is declared to -dlopen it." ++ if (check_executable (concat_name)) ++ return concat_name; ++ XFREE (concat_name); ++ return NULL; ++} + +- if test "$allow_undefined" = no; then +- $echo +- $echo "*** Since this library must not contain undefined symbols," +- $echo "*** because either the platform does not support them or" +- $echo "*** it was explicitly requested with -no-undefined," +- $echo "*** libtool will only create a static version of it." +- if test "$build_old_libs" = no; then +- oldlibs="$output_objdir/$libname.$libext" +- build_libtool_libs=module +- build_old_libs=yes +- else +- build_libtool_libs=no +- fi +- fi +- fi +- fi +- # Done checking deplibs! +- deplibs=$newdeplibs +- fi ++char * ++chase_symlinks (const char *pathspec) ++{ ++#ifndef S_ISLNK ++ return xstrdup (pathspec); ++#else ++ char buf[LT_PATHMAX]; ++ struct stat s; ++ char *tmp_pathspec = xstrdup (pathspec); ++ char *p; ++ int has_symlinks = 0; ++ while (strlen (tmp_pathspec) && !has_symlinks) ++ { ++ LTWRAPPER_DEBUGPRINTF (("checking path component for symlinks: %s\n", ++ tmp_pathspec)); ++ if (lstat (tmp_pathspec, &s) == 0) ++ { ++ if (S_ISLNK (s.st_mode) != 0) ++ { ++ has_symlinks = 1; ++ break; ++ } + ++ /* search backwards for last DIR_SEPARATOR */ ++ p = tmp_pathspec + strlen (tmp_pathspec) - 1; ++ while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p))) ++ p--; ++ if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p))) ++ { ++ /* no more DIR_SEPARATORS left */ ++ break; ++ } ++ *p = '\0'; ++ } ++ else ++ { ++ char *errstr = strerror (errno); ++ lt_fatal ("Error accessing file %s (%s)", tmp_pathspec, errstr); ++ } ++ } ++ XFREE (tmp_pathspec); + +- # move library search paths that coincide with paths to not yet +- # installed libraries to the beginning of the library search list +- new_libs= +- for path in $notinst_path; do +- case " $new_libs " in +- *" -L$path/$objdir "*) ;; +- *) +- case " $deplibs " in +- *" -L$path/$objdir "*) +- new_libs="$new_libs -L$path/$objdir" ;; +- esac +- ;; +- esac +- done +- for deplib in $deplibs; do +- case $deplib in +- -L*) +- case " $new_libs " in +- *" $deplib "*) ;; +- *) new_libs="$new_libs $deplib" ;; +- esac +- ;; +- *) new_libs="$new_libs $deplib" ;; +- esac +- done +- deplibs="$new_libs" ++ if (!has_symlinks) ++ { ++ return xstrdup (pathspec); ++ } + ++ tmp_pathspec = realpath (pathspec, buf); ++ if (tmp_pathspec == 0) ++ { ++ lt_fatal ("Could not follow symlinks for %s", pathspec); ++ } ++ return xstrdup (tmp_pathspec); ++#endif ++} + +- # All the library-specific variables (install_libdir is set above). +- library_names= +- old_library= +- dlname= ++char * ++strendzap (char *str, const char *pat) ++{ ++ size_t len, patlen; + +- # Test again, we may have decided not to build it any more +- if test "$build_libtool_libs" = yes; then +- if test "$hardcode_into_libs" = yes; then +- # Hardcode the library paths +- hardcode_libdirs= +- dep_rpath= +- rpath="$finalize_rpath" +- test "$mode" != relink && rpath="$compile_rpath$rpath" +- for libdir in $rpath; do +- if test -n "$hardcode_libdir_flag_spec"; then +- if test -n "$hardcode_libdir_separator"; then +- if test -z "$hardcode_libdirs"; then +- hardcode_libdirs="$libdir" +- else +- # Just accumulate the unique libdirs. +- case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in +- *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) +- ;; +- *) +- hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" +- ;; +- esac +- fi +- else +- eval flag=\"$hardcode_libdir_flag_spec\" +- dep_rpath="$dep_rpath $flag" +- fi +- elif test -n "$runpath_var"; then +- case "$perm_rpath " in +- *" $libdir "*) ;; +- *) perm_rpath="$perm_rpath $libdir" ;; +- esac +- fi +- done +- # Substitute the hardcoded libdirs into the rpath. +- if test -n "$hardcode_libdir_separator" && +- test -n "$hardcode_libdirs"; then +- libdir="$hardcode_libdirs" +- if test -n "$hardcode_libdir_flag_spec_ld"; then +- case $archive_cmds in +- *\$LD*) eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\" ;; +- *) eval dep_rpath=\"$hardcode_libdir_flag_spec\" ;; +- esac +- else +- eval dep_rpath=\"$hardcode_libdir_flag_spec\" +- fi +- fi +- if test -n "$runpath_var" && test -n "$perm_rpath"; then +- # We should set the runpath_var. +- rpath= +- for dir in $perm_rpath; do +- rpath="$rpath$dir:" +- done +- eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var" +- fi +- test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs" +- fi ++ assert (str != NULL); ++ assert (pat != NULL); + +- shlibpath="$finalize_shlibpath" +- test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath" +- if test -n "$shlibpath"; then +- eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var" +- fi ++ len = strlen (str); ++ patlen = strlen (pat); + +- # Get the real and link names of the library. +- eval shared_ext=\"$shrext_cmds\" +- eval library_names=\"$library_names_spec\" +- set dummy $library_names +- realname="$2" +- shift; shift ++ if (patlen <= len) ++ { ++ str += len - patlen; ++ if (strcmp (str, pat) == 0) ++ *str = '\0'; ++ } ++ return str; ++} + +- if test -n "$soname_spec"; then +- eval soname=\"$soname_spec\" +- else +- soname="$realname" +- fi +- if test -z "$dlname"; then +- dlname=$soname +- fi ++static void ++lt_error_core (int exit_status, const char *mode, ++ const char *message, va_list ap) ++{ ++ fprintf (stderr, "%s: %s: ", program_name, mode); ++ vfprintf (stderr, message, ap); ++ fprintf (stderr, ".\n"); + +- lib="$output_objdir/$realname" +- linknames= +- for link +- do +- linknames="$linknames $link" +- done ++ if (exit_status >= 0) ++ exit (exit_status); ++} + +- # Use standard objects if they are pic +- test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` ++void ++lt_fatal (const char *message, ...) ++{ ++ va_list ap; ++ va_start (ap, message); ++ lt_error_core (EXIT_FAILURE, "FATAL", message, ap); ++ va_end (ap); ++} ++EOF ++} ++# end: func_emit_cwrapperexe_src + +- # Prepare the list of exported symbols +- if test -z "$export_symbols"; then +- if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then +- $show "generating symbol list for \`$libname.la'" +- export_symbols="$output_objdir/$libname.exp" +- $run $rm $export_symbols +- cmds=$export_symbols_cmds +- save_ifs="$IFS"; IFS='~' +- for cmd in $cmds; do +- IFS="$save_ifs" +- eval cmd=\"$cmd\" +- if len=`expr "X$cmd" : ".*"` && +- test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then +- $show "$cmd" +- $run eval "$cmd" || exit $? +- skipped_export=false +- else +- # The command line is too long to execute in one step. +- $show "using reloadable object file for export list..." +- skipped_export=: +- # Break out early, otherwise skipped_export may be +- # set to false by a later but shorter cmd. +- break +- fi +- done +- IFS="$save_ifs" +- if test -n "$export_symbols_regex"; then +- $show "$EGREP -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\"" +- $run eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' +- $show "$mv \"${export_symbols}T\" \"$export_symbols\"" +- $run eval '$mv "${export_symbols}T" "$export_symbols"' +- fi +- fi +- fi ++# func_mode_link arg... ++func_mode_link () ++{ ++ $opt_debug ++ case $host in ++ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) ++ # It is impossible to link a dll without this setting, and ++ # we shouldn't force the makefile maintainer to figure out ++ # which system we are compiling for in order to pass an extra ++ # flag for every libtool invocation. ++ # allow_undefined=no + +- if test -n "$export_symbols" && test -n "$include_expsyms"; then +- $run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"' +- fi ++ # FIXME: Unfortunately, there are problems with the above when trying ++ # to make a dll which has undefined symbols, in which case not ++ # even a static library is built. For now, we need to specify ++ # -no-undefined on the libtool link line when we can be certain ++ # that all symbols are satisfied, otherwise we get a static library. ++ allow_undefined=yes ++ ;; ++ *) ++ allow_undefined=yes ++ ;; ++ esac ++ libtool_args=$nonopt ++ base_compile="$nonopt $@" ++ compile_command=$nonopt ++ finalize_command=$nonopt + +- tmp_deplibs= +- for test_deplib in $deplibs; do +- case " $convenience " in +- *" $test_deplib "*) ;; +- *) +- tmp_deplibs="$tmp_deplibs $test_deplib" +- ;; +- esac +- done +- deplibs="$tmp_deplibs" ++ compile_rpath= ++ finalize_rpath= ++ compile_shlibpath= ++ finalize_shlibpath= ++ convenience= ++ old_convenience= ++ deplibs= ++ old_deplibs= ++ compiler_flags= ++ linker_flags= ++ dllsearchpath= ++ lib_search_path=`pwd` ++ inst_prefix_dir= ++ new_inherited_linker_flags= + +- if test -n "$convenience"; then +- if test -n "$whole_archive_flag_spec"; then +- save_libobjs=$libobjs +- eval libobjs=\"\$libobjs $whole_archive_flag_spec\" +- else +- gentop="$output_objdir/${outputname}x" +- generated="$generated $gentop" ++ avoid_version=no ++ dlfiles= ++ dlprefiles= ++ dlself=no ++ export_dynamic=no ++ export_symbols= ++ export_symbols_regex= ++ generated= ++ libobjs= ++ ltlibs= ++ module=no ++ no_install=no ++ objs= ++ non_pic_objects= ++ precious_files_regex= ++ prefer_static_libs=no ++ preload=no ++ prev= ++ prevarg= ++ release= ++ rpath= ++ xrpath= ++ perm_rpath= ++ temp_rpath= ++ thread_safe=no ++ vinfo= ++ vinfo_number=no ++ weak_libs= ++ single_module="${wl}-single_module" ++ func_infer_tag $base_compile + +- func_extract_archives $gentop $convenience +- libobjs="$libobjs $func_extract_archives_result" ++ # We need to know -static, to get the right output filenames. ++ for arg ++ do ++ case $arg in ++ -shared) ++ test "$build_libtool_libs" != yes && \ ++ func_fatal_configuration "can not build a shared library" ++ build_old_libs=no ++ break ++ ;; ++ -all-static | -static | -static-libtool-libs) ++ case $arg in ++ -all-static) ++ if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then ++ func_warning "complete static linking is impossible in this configuration" + fi +- fi +- +- if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then +- eval flag=\"$thread_safe_flag_spec\" +- linker_flags="$linker_flags $flag" +- fi +- +- # Make a backup of the uninstalled library when relinking +- if test "$mode" = relink; then +- $run eval '(cd $output_objdir && $rm ${realname}U && $mv $realname ${realname}U)' || exit $? +- fi +- +- # Do each of the archive commands. +- if test "$module" = yes && test -n "$module_cmds" ; then +- if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then +- eval test_cmds=\"$module_expsym_cmds\" +- cmds=$module_expsym_cmds +- else +- eval test_cmds=\"$module_cmds\" +- cmds=$module_cmds ++ if test -n "$link_static_flag"; then ++ dlopen_self=$dlopen_self_static + fi +- else +- if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then +- eval test_cmds=\"$archive_expsym_cmds\" +- cmds=$archive_expsym_cmds +- else +- eval test_cmds=\"$archive_cmds\" +- cmds=$archive_cmds ++ prefer_static_libs=yes ++ ;; ++ -static) ++ if test -z "$pic_flag" && test -n "$link_static_flag"; then ++ dlopen_self=$dlopen_self_static + fi +- fi +- +- if test "X$skipped_export" != "X:" && +- len=`expr "X$test_cmds" : ".*" 2>/dev/null` && +- test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then +- : +- else +- # The command line is too long to link in one step, link piecewise. +- $echo "creating reloadable object files..." +- +- # Save the value of $output and $libobjs because we want to +- # use them later. If we have whole_archive_flag_spec, we +- # want to use save_libobjs as it was before +- # whole_archive_flag_spec was expanded, because we can't +- # assume the linker understands whole_archive_flag_spec. +- # This may have to be revisited, in case too many +- # convenience libraries get linked in and end up exceeding +- # the spec. +- if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then +- save_libobjs=$libobjs ++ prefer_static_libs=built ++ ;; ++ -static-libtool-libs) ++ if test -z "$pic_flag" && test -n "$link_static_flag"; then ++ dlopen_self=$dlopen_self_static + fi +- save_output=$output +- output_la=`$echo "X$output" | $Xsed -e "$basename"` +- +- # Clear the reloadable object creation command queue and +- # initialize k to one. +- test_cmds= +- concat_cmds= +- objlist= +- delfiles= +- last_robj= +- k=1 +- output=$output_objdir/$output_la-${k}.$objext +- # Loop over the list of objects to be linked. +- for obj in $save_libobjs +- do +- eval test_cmds=\"$reload_cmds $objlist $last_robj\" +- if test "X$objlist" = X || +- { len=`expr "X$test_cmds" : ".*" 2>/dev/null` && +- test "$len" -le "$max_cmd_len"; }; then +- objlist="$objlist $obj" +- else +- # The command $test_cmds is almost too long, add a +- # command to the queue. +- if test "$k" -eq 1 ; then +- # The first file doesn't have a previous command to add. +- eval concat_cmds=\"$reload_cmds $objlist $last_robj\" +- else +- # All subsequent reloadable object files will link in +- # the last one created. +- eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj\" +- fi +- last_robj=$output_objdir/$output_la-${k}.$objext +- k=`expr $k + 1` +- output=$output_objdir/$output_la-${k}.$objext +- objlist=$obj +- len=1 +- fi +- done +- # Handle the remaining objects by creating one last +- # reloadable object file. All subsequent reloadable object +- # files will link in the last one created. +- test -z "$concat_cmds" || concat_cmds=$concat_cmds~ +- eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\" +- +- if ${skipped_export-false}; then +- $show "generating symbol list for \`$libname.la'" +- export_symbols="$output_objdir/$libname.exp" +- $run $rm $export_symbols +- libobjs=$output +- # Append the command to create the export file. +- eval concat_cmds=\"\$concat_cmds~$export_symbols_cmds\" +- fi +- +- # Set up a command to remove the reloadable object files +- # after they are used. +- i=0 +- while test "$i" -lt "$k" +- do +- i=`expr $i + 1` +- delfiles="$delfiles $output_objdir/$output_la-${i}.$objext" +- done ++ prefer_static_libs=yes ++ ;; ++ esac ++ build_libtool_libs=no ++ build_old_libs=yes ++ break ++ ;; ++ esac ++ done + +- $echo "creating a temporary reloadable object file: $output" ++ # See if our shared archives depend on static archives. ++ test -n "$old_archive_from_new_cmds" && build_old_libs=yes + +- # Loop through the commands generated above and execute them. +- save_ifs="$IFS"; IFS='~' +- for cmd in $concat_cmds; do +- IFS="$save_ifs" +- $show "$cmd" +- $run eval "$cmd" || exit $? +- done +- IFS="$save_ifs" ++ # Go through the arguments, transforming them on the way. ++ while test "$#" -gt 0; do ++ arg="$1" ++ shift ++ func_quote_for_eval "$arg" ++ qarg=$func_quote_for_eval_unquoted_result ++ func_append libtool_args " $func_quote_for_eval_result" + +- libobjs=$output +- # Restore the value of output. +- output=$save_output ++ # If the previous option needs an argument, assign it. ++ if test -n "$prev"; then ++ case $prev in ++ output) ++ func_append compile_command " @OUTPUT@" ++ func_append finalize_command " @OUTPUT@" ++ ;; ++ esac + +- if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then +- eval libobjs=\"\$libobjs $whole_archive_flag_spec\" ++ case $prev in ++ dlfiles|dlprefiles) ++ if test "$preload" = no; then ++ # Add the symbol object into the linking commands. ++ func_append compile_command " @SYMFILE@" ++ func_append finalize_command " @SYMFILE@" ++ preload=yes + fi +- # Expand the library linking commands again to reset the +- # value of $libobjs for piecewise linking. +- +- # Do each of the archive commands. +- if test "$module" = yes && test -n "$module_cmds" ; then +- if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then +- cmds=$module_expsym_cmds +- else +- cmds=$module_cmds ++ case $arg in ++ *.la | *.lo) ;; # We handle these cases below. ++ force) ++ if test "$dlself" = no; then ++ dlself=needless ++ export_dynamic=yes + fi +- else +- if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then +- cmds=$archive_expsym_cmds +- else +- cmds=$archive_cmds ++ prev= ++ continue ++ ;; ++ self) ++ if test "$prev" = dlprefiles; then ++ dlself=yes ++ elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then ++ dlself=yes ++ else ++ dlself=needless ++ export_dynamic=yes + fi +- fi +- +- # Append the command to remove the reloadable object files +- # to the just-reset $cmds. +- eval cmds=\"\$cmds~\$rm $delfiles\" +- fi +- save_ifs="$IFS"; IFS='~' +- for cmd in $cmds; do +- IFS="$save_ifs" +- eval cmd=\"$cmd\" +- $show "$cmd" +- $run eval "$cmd" || { +- lt_exit=$? +- +- # Restore the uninstalled library and exit +- if test "$mode" = relink; then +- $run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)' ++ prev= ++ continue ++ ;; ++ *) ++ if test "$prev" = dlfiles; then ++ dlfiles="$dlfiles $arg" ++ else ++ dlprefiles="$dlprefiles $arg" + fi ++ prev= ++ continue ++ ;; ++ esac ++ ;; ++ expsyms) ++ export_symbols="$arg" ++ test -f "$arg" \ ++ || func_fatal_error "symbol file \`$arg' does not exist" ++ prev= ++ continue ++ ;; ++ expsyms_regex) ++ export_symbols_regex="$arg" ++ prev= ++ continue ++ ;; ++ framework) ++ case $host in ++ *-*-darwin*) ++ case "$deplibs " in ++ *" $qarg.ltframework "*) ;; ++ *) deplibs="$deplibs $qarg.ltframework" # this is fixed later ++ ;; ++ esac ++ ;; ++ esac ++ prev= ++ continue ++ ;; ++ inst_prefix) ++ inst_prefix_dir="$arg" ++ prev= ++ continue ++ ;; ++ objectlist) ++ if test -f "$arg"; then ++ save_arg=$arg ++ moreargs= ++ for fil in `cat "$save_arg"` ++ do ++# moreargs="$moreargs $fil" ++ arg=$fil ++ # A libtool-controlled object. + +- exit $lt_exit +- } +- done +- IFS="$save_ifs" ++ # Check to see that this really is a libtool object. ++ if func_lalib_unsafe_p "$arg"; then ++ pic_object= ++ non_pic_object= + +- # Restore the uninstalled library and exit +- if test "$mode" = relink; then +- $run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $? ++ # Read the .lo file ++ func_source "$arg" + +- if test -n "$convenience"; then +- if test -z "$whole_archive_flag_spec"; then +- $show "${rm}r $gentop" +- $run ${rm}r "$gentop" +- fi +- fi ++ if test -z "$pic_object" || ++ test -z "$non_pic_object" || ++ test "$pic_object" = none && ++ test "$non_pic_object" = none; then ++ func_fatal_error "cannot find name of object for \`$arg'" ++ fi + +- exit $EXIT_SUCCESS +- fi ++ # Extract subdirectory from the argument. ++ func_dirname "$arg" "/" "" ++ xdir="$func_dirname_result" + +- # Create links to the real library. +- for linkname in $linknames; do +- if test "$realname" != "$linkname"; then +- $show "(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)" +- $run eval '(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)' || exit $? +- fi +- done ++ if test "$pic_object" != none; then ++ # Prepend the subdirectory the object is found in. ++ pic_object="$xdir$pic_object" + +- # If -module or -export-dynamic was specified, set the dlname. +- if test "$module" = yes || test "$export_dynamic" = yes; then +- # On all known operating systems, these are identical. +- dlname="$soname" +- fi +- fi +- ;; ++ if test "$prev" = dlfiles; then ++ if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then ++ dlfiles="$dlfiles $pic_object" ++ prev= ++ continue ++ else ++ # If libtool objects are unsupported, then we need to preload. ++ prev=dlprefiles ++ fi ++ fi + +- obj) +- case " $deplibs" in +- *\ -l* | *\ -L*) +- $echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2 ;; +- esac ++ # CHECK ME: I think I busted this. -Ossama ++ if test "$prev" = dlprefiles; then ++ # Preload the old-style object. ++ dlprefiles="$dlprefiles $pic_object" ++ prev= ++ fi + +- if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then +- $echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2 +- fi ++ # A PIC object. ++ func_append libobjs " $pic_object" ++ arg="$pic_object" ++ fi + +- if test -n "$rpath"; then +- $echo "$modename: warning: \`-rpath' is ignored for objects" 1>&2 +- fi ++ # Non-PIC object. ++ if test "$non_pic_object" != none; then ++ # Prepend the subdirectory the object is found in. ++ non_pic_object="$xdir$non_pic_object" + +- if test -n "$xrpath"; then +- $echo "$modename: warning: \`-R' is ignored for objects" 1>&2 +- fi ++ # A standard non-PIC object ++ func_append non_pic_objects " $non_pic_object" ++ if test -z "$pic_object" || test "$pic_object" = none ; then ++ arg="$non_pic_object" ++ fi ++ else ++ # If the PIC object exists, use it instead. ++ # $xdir was prepended to $pic_object above. ++ non_pic_object="$pic_object" ++ func_append non_pic_objects " $non_pic_object" ++ fi ++ else ++ # Only an error if not doing a dry-run. ++ if $opt_dry_run; then ++ # Extract subdirectory from the argument. ++ func_dirname "$arg" "/" "" ++ xdir="$func_dirname_result" + +- if test -n "$vinfo"; then +- $echo "$modename: warning: \`-version-info' is ignored for objects" 1>&2 +- fi ++ func_lo2o "$arg" ++ pic_object=$xdir$objdir/$func_lo2o_result ++ non_pic_object=$xdir$func_lo2o_result ++ func_append libobjs " $pic_object" ++ func_append non_pic_objects " $non_pic_object" ++ else ++ func_fatal_error "\`$arg' is not a valid libtool object" ++ fi ++ fi ++ done ++ else ++ func_fatal_error "link input file \`$arg' does not exist" ++ fi ++ arg=$save_arg ++ prev= ++ continue ++ ;; ++ precious_regex) ++ precious_files_regex="$arg" ++ prev= ++ continue ++ ;; ++ release) ++ release="-$arg" ++ prev= ++ continue ++ ;; ++ rpath | xrpath) ++ # We need an absolute path. ++ case $arg in ++ [\\/]* | [A-Za-z]:[\\/]*) ;; ++ *) ++ func_fatal_error "only absolute run-paths are allowed" ++ ;; ++ esac ++ if test "$prev" = rpath; then ++ case "$rpath " in ++ *" $arg "*) ;; ++ *) rpath="$rpath $arg" ;; ++ esac ++ else ++ case "$xrpath " in ++ *" $arg "*) ;; ++ *) xrpath="$xrpath $arg" ;; ++ esac ++ fi ++ prev= ++ continue ++ ;; ++ shrext) ++ shrext_cmds="$arg" ++ prev= ++ continue ++ ;; ++ weak) ++ weak_libs="$weak_libs $arg" ++ prev= ++ continue ++ ;; ++ xcclinker) ++ linker_flags="$linker_flags $qarg" ++ compiler_flags="$compiler_flags $qarg" ++ prev= ++ func_append compile_command " $qarg" ++ func_append finalize_command " $qarg" ++ continue ++ ;; ++ xcompiler) ++ compiler_flags="$compiler_flags $qarg" ++ prev= ++ func_append compile_command " $qarg" ++ func_append finalize_command " $qarg" ++ continue ++ ;; ++ xlinker) ++ linker_flags="$linker_flags $qarg" ++ compiler_flags="$compiler_flags $wl$qarg" ++ prev= ++ func_append compile_command " $wl$qarg" ++ func_append finalize_command " $wl$qarg" ++ continue ++ ;; ++ *) ++ eval "$prev=\"\$arg\"" ++ prev= ++ continue ++ ;; ++ esac ++ fi # test -n "$prev" + +- if test -n "$release"; then +- $echo "$modename: warning: \`-release' is ignored for objects" 1>&2 +- fi ++ prevarg="$arg" + +- case $output in +- *.lo) +- if test -n "$objs$old_deplibs"; then +- $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2 +- exit $EXIT_FAILURE ++ case $arg in ++ -all-static) ++ if test -n "$link_static_flag"; then ++ # See comment for -static flag below, for more details. ++ func_append compile_command " $link_static_flag" ++ func_append finalize_command " $link_static_flag" + fi +- libobj="$output" +- obj=`$echo "X$output" | $Xsed -e "$lo2o"` ++ continue + ;; +- *) +- libobj= +- obj="$output" ++ ++ -allow-undefined) ++ # FIXME: remove this flag sometime in the future. ++ func_fatal_error "\`-allow-undefined' must not be used because it is the default" + ;; +- esac + +- # Delete the old objects. +- $run $rm $obj $libobj ++ -avoid-version) ++ avoid_version=yes ++ continue ++ ;; + +- # Objects from convenience libraries. This assumes +- # single-version convenience libraries. Whenever we create +- # different ones for PIC/non-PIC, this we'll have to duplicate +- # the extraction. +- reload_conv_objs= +- gentop= +- # reload_cmds runs $LD directly, so let us get rid of +- # -Wl from whole_archive_flag_spec and hope we can get by with +- # turning comma into space.. +- wl= +- +- if test -n "$convenience"; then +- if test -n "$whole_archive_flag_spec"; then +- eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\" +- reload_conv_objs=$reload_objs\ `$echo "X$tmp_whole_archive_flags" | $Xsed -e 's|,| |g'` +- else +- gentop="$output_objdir/${obj}x" +- generated="$generated $gentop" +- +- func_extract_archives $gentop $convenience +- reload_conv_objs="$reload_objs $func_extract_archives_result" +- fi +- fi +- +- # Create the old-style object. +- reload_objs="$objs$old_deplibs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test +- +- output="$obj" +- cmds=$reload_cmds +- save_ifs="$IFS"; IFS='~' +- for cmd in $cmds; do +- IFS="$save_ifs" +- eval cmd=\"$cmd\" +- $show "$cmd" +- $run eval "$cmd" || exit $? +- done +- IFS="$save_ifs" ++ -dlopen) ++ prev=dlfiles ++ continue ++ ;; + +- # Exit if we aren't doing a library object file. +- if test -z "$libobj"; then +- if test -n "$gentop"; then +- $show "${rm}r $gentop" +- $run ${rm}r $gentop +- fi ++ -dlpreopen) ++ prev=dlprefiles ++ continue ++ ;; + +- exit $EXIT_SUCCESS +- fi ++ -export-dynamic) ++ export_dynamic=yes ++ continue ++ ;; + +- if test "$build_libtool_libs" != yes; then +- if test -n "$gentop"; then +- $show "${rm}r $gentop" +- $run ${rm}r $gentop ++ -export-symbols | -export-symbols-regex) ++ if test -n "$export_symbols" || test -n "$export_symbols_regex"; then ++ func_fatal_error "more than one -exported-symbols argument is not allowed" + fi +- +- # Create an invalid libtool object if no PIC, so that we don't +- # accidentally link it into a program. +- # $show "echo timestamp > $libobj" +- # $run eval "echo timestamp > $libobj" || exit $? +- exit $EXIT_SUCCESS +- fi +- +- if test -n "$pic_flag" || test "$pic_mode" != default; then +- # Only do commands if we really have different PIC objects. +- reload_objs="$libobjs $reload_conv_objs" +- output="$libobj" +- cmds=$reload_cmds +- save_ifs="$IFS"; IFS='~' +- for cmd in $cmds; do +- IFS="$save_ifs" +- eval cmd=\"$cmd\" +- $show "$cmd" +- $run eval "$cmd" || exit $? +- done +- IFS="$save_ifs" +- fi +- +- if test -n "$gentop"; then +- $show "${rm}r $gentop" +- $run ${rm}r $gentop +- fi +- +- exit $EXIT_SUCCESS +- ;; +- +- prog) +- case $host in +- *cygwin*) output=`$echo $output | ${SED} -e 's,.exe$,,;s,$,.exe,'` ;; +- esac +- if test -n "$vinfo"; then +- $echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2 +- fi +- +- if test -n "$release"; then +- $echo "$modename: warning: \`-release' is ignored for programs" 1>&2 +- fi +- +- if test "$preload" = yes; then +- if test "$dlopen_support" = unknown && test "$dlopen_self" = unknown && +- test "$dlopen_self_static" = unknown; then +- $echo "$modename: warning: \`AC_LIBTOOL_DLOPEN' not used. Assuming no dlopen support." ++ if test "X$arg" = "X-export-symbols"; then ++ prev=expsyms ++ else ++ prev=expsyms_regex + fi +- fi ++ continue ++ ;; + +- case $host in +- *-*-rhapsody* | *-*-darwin1.[012]) +- # On Rhapsody replace the C library is the System framework +- compile_deplibs=`$echo "X $compile_deplibs" | $Xsed -e 's/ -lc / -framework System /'` +- finalize_deplibs=`$echo "X $finalize_deplibs" | $Xsed -e 's/ -lc / -framework System /'` ++ -framework) ++ prev=framework ++ continue + ;; +- esac + +- case $host in +- *darwin*) +- # Don't allow lazy linking, it breaks C++ global constructors +- if test "$tagname" = CXX ; then +- compile_command="$compile_command ${wl}-bind_at_load" +- finalize_command="$finalize_command ${wl}-bind_at_load" +- fi +- ;; +- esac ++ -inst-prefix-dir) ++ prev=inst_prefix ++ continue ++ ;; + ++ # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:* ++ # so, if we see these flags be careful not to treat them like -L ++ -L[A-Z][A-Z]*:*) ++ case $with_gcc/$host in ++ no/*-*-irix* | /*-*-irix*) ++ func_append compile_command " $arg" ++ func_append finalize_command " $arg" ++ ;; ++ esac ++ continue ++ ;; + +- # move library search paths that coincide with paths to not yet +- # installed libraries to the beginning of the library search list +- new_libs= +- for path in $notinst_path; do +- case " $new_libs " in +- *" -L$path/$objdir "*) ;; ++ -L*) ++ func_stripname '-L' '' "$arg" ++ dir=$func_stripname_result ++ # We need an absolute path. ++ case $dir in ++ [\\/]* | [A-Za-z]:[\\/]*) ;; + *) +- case " $compile_deplibs " in +- *" -L$path/$objdir "*) +- new_libs="$new_libs -L$path/$objdir" ;; +- esac ++ absdir=`cd "$dir" && pwd` ++ test -z "$absdir" && \ ++ func_fatal_error "cannot determine absolute directory name of \`$dir'" ++ dir="$absdir" + ;; + esac +- done +- for deplib in $compile_deplibs; do +- case $deplib in +- -L*) +- case " $new_libs " in +- *" $deplib "*) ;; +- *) new_libs="$new_libs $deplib" ;; +- esac ++ case "$deplibs " in ++ *" -L$dir "*) ;; ++ *) ++ deplibs="$deplibs -L$dir" ++ lib_search_path="$lib_search_path $dir" + ;; +- *) new_libs="$new_libs $deplib" ;; + esac +- done +- compile_deplibs="$new_libs" +- +- +- compile_command="$compile_command $compile_deplibs" +- finalize_command="$finalize_command $finalize_deplibs" +- +- if test -n "$rpath$xrpath"; then +- # If the user specified any rpath flags, then add them. +- for libdir in $rpath $xrpath; do +- # This is the magic to use -rpath. +- case "$finalize_rpath " in +- *" $libdir "*) ;; +- *) finalize_rpath="$finalize_rpath $libdir" ;; +- esac +- done +- fi +- +- # Now hardcode the library paths +- rpath= +- hardcode_libdirs= +- for libdir in $compile_rpath $finalize_rpath; do +- if test -n "$hardcode_libdir_flag_spec"; then +- if test -n "$hardcode_libdir_separator"; then +- if test -z "$hardcode_libdirs"; then +- hardcode_libdirs="$libdir" +- else +- # Just accumulate the unique libdirs. +- case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in +- *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) +- ;; +- *) +- hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" +- ;; +- esac +- fi +- else +- eval flag=\"$hardcode_libdir_flag_spec\" +- rpath="$rpath $flag" +- fi +- elif test -n "$runpath_var"; then +- case "$perm_rpath " in +- *" $libdir "*) ;; +- *) perm_rpath="$perm_rpath $libdir" ;; +- esac +- fi + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) +- testbindir=`$echo "X$libdir" | $Xsed -e 's*/lib$*/bin*'` ++ testbindir=`$ECHO "X$dir" | $Xsed -e 's*/lib$*/bin*'` + case :$dllsearchpath: in +- *":$libdir:"*) ;; +- *) dllsearchpath="$dllsearchpath:$libdir";; ++ *":$dir:"*) ;; ++ *) dllsearchpath="$dllsearchpath:$dir";; + esac + case :$dllsearchpath: in + *":$testbindir:"*) ;; +@@ -4510,2024 +3989,3682 @@ + esac + ;; + esac +- done +- # Substitute the hardcoded libdirs into the rpath. +- if test -n "$hardcode_libdir_separator" && +- test -n "$hardcode_libdirs"; then +- libdir="$hardcode_libdirs" +- eval rpath=\" $hardcode_libdir_flag_spec\" +- fi +- compile_rpath="$rpath" ++ continue ++ ;; + +- rpath= +- hardcode_libdirs= +- for libdir in $finalize_rpath; do +- if test -n "$hardcode_libdir_flag_spec"; then +- if test -n "$hardcode_libdir_separator"; then +- if test -z "$hardcode_libdirs"; then +- hardcode_libdirs="$libdir" +- else +- # Just accumulate the unique libdirs. +- case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in +- *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) +- ;; +- *) +- hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" +- ;; +- esac +- fi +- else +- eval flag=\"$hardcode_libdir_flag_spec\" +- rpath="$rpath $flag" +- fi +- elif test -n "$runpath_var"; then +- case "$finalize_perm_rpath " in +- *" $libdir "*) ;; +- *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;; ++ -l*) ++ if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then ++ case $host in ++ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos*) ++ # These systems don't actually have a C or math library (as such) ++ continue ++ ;; ++ *-*-os2*) ++ # These systems don't actually have a C library (as such) ++ test "X$arg" = "X-lc" && continue ++ ;; ++ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) ++ # Do not include libc due to us having libc/libc_r. ++ test "X$arg" = "X-lc" && continue ++ ;; ++ *-*-rhapsody* | *-*-darwin1.[012]) ++ # Rhapsody C and math libraries are in the System framework ++ deplibs="$deplibs System.ltframework" ++ continue ++ ;; ++ *-*-sco3.2v5* | *-*-sco5v6*) ++ # Causes problems with __ctype ++ test "X$arg" = "X-lc" && continue ++ ;; ++ *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) ++ # Compiler inserts libc in the correct place for threads to work ++ test "X$arg" = "X-lc" && continue ++ ;; + esac ++ elif test "X$arg" = "X-lc_r"; then ++ case $host in ++ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) ++ # Do not include libc_r directly, use -pthread flag. ++ continue ++ ;; ++ esac + fi +- done +- # Substitute the hardcoded libdirs into the rpath. +- if test -n "$hardcode_libdir_separator" && +- test -n "$hardcode_libdirs"; then +- libdir="$hardcode_libdirs" +- eval rpath=\" $hardcode_libdir_flag_spec\" +- fi +- finalize_rpath="$rpath" +- +- if test -n "$libobjs" && test "$build_old_libs" = yes; then +- # Transform all the library objects into standard objects. +- compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` +- finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` +- fi +- +- dlsyms= +- if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then +- if test -n "$NM" && test -n "$global_symbol_pipe"; then +- dlsyms="${outputname}S.c" +- else +- $echo "$modename: not configured to extract global symbols from dlpreopened files" 1>&2 +- fi +- fi ++ deplibs="$deplibs $arg" ++ continue ++ ;; + +- if test -n "$dlsyms"; then +- case $dlsyms in +- "") ;; +- *.c) +- # Discover the nlist of each of the dlfiles. +- nlist="$output_objdir/${outputname}.nm" ++ -module) ++ module=yes ++ continue ++ ;; + +- $show "$rm $nlist ${nlist}S ${nlist}T" +- $run $rm "$nlist" "${nlist}S" "${nlist}T" ++ # Tru64 UNIX uses -model [arg] to determine the layout of C++ ++ # classes, name mangling, and exception handling. ++ # Darwin uses the -arch flag to determine output architecture. ++ -model|-arch|-isysroot) ++ compiler_flags="$compiler_flags $arg" ++ func_append compile_command " $arg" ++ func_append finalize_command " $arg" ++ prev=xcompiler ++ continue ++ ;; + +- # Parse the name list into a source file. +- $show "creating $output_objdir/$dlsyms" ++ -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads) ++ compiler_flags="$compiler_flags $arg" ++ func_append compile_command " $arg" ++ func_append finalize_command " $arg" ++ case "$new_inherited_linker_flags " in ++ *" $arg "*) ;; ++ * ) new_inherited_linker_flags="$new_inherited_linker_flags $arg" ;; ++ esac ++ continue ++ ;; + +- test -z "$run" && $echo > "$output_objdir/$dlsyms" "\ +-/* $dlsyms - symbol resolution table for \`$outputname' dlsym emulation. */ +-/* Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP */ ++ -multi_module) ++ single_module="${wl}-multi_module" ++ continue ++ ;; + +-#ifdef __cplusplus +-extern \"C\" { +-#endif ++ -no-fast-install) ++ fast_install=no ++ continue ++ ;; + +-/* Prevent the only kind of declaration conflicts we can make. */ +-#define lt_preloaded_symbols some_other_symbol ++ -no-install) ++ case $host in ++ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin*) ++ # The PATH hackery in wrapper scripts is required on Windows ++ # and Darwin in order for the loader to find any dlls it needs. ++ func_warning "\`-no-install' is ignored for $host" ++ func_warning "assuming \`-no-fast-install' instead" ++ fast_install=no ++ ;; ++ *) no_install=yes ;; ++ esac ++ continue ++ ;; + +-/* External symbol declarations for the compiler. */\ +-" ++ -no-undefined) ++ allow_undefined=no ++ continue ++ ;; + +- if test "$dlself" = yes; then +- $show "generating symbol list for \`$output'" ++ -objectlist) ++ prev=objectlist ++ continue ++ ;; + +- test -z "$run" && $echo ': @PROGRAM@ ' > "$nlist" ++ -o) prev=output ;; + +- # Add our own program objects to the symbol list. +- progfiles=`$echo "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` +- for arg in $progfiles; do +- $show "extracting global C symbols from \`$arg'" +- $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'" +- done ++ -precious-files-regex) ++ prev=precious_regex ++ continue ++ ;; + +- if test -n "$exclude_expsyms"; then +- $run eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' +- $run eval '$mv "$nlist"T "$nlist"' +- fi +- +- if test -n "$export_symbols_regex"; then +- $run eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T' +- $run eval '$mv "$nlist"T "$nlist"' +- fi +- +- # Prepare the list of exported symbols +- if test -z "$export_symbols"; then +- export_symbols="$output_objdir/$outputname.exp" +- $run $rm $export_symbols +- $run eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' +- case $host in +- *cygwin* | *mingw* ) +- $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' +- $run eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"' +- ;; +- esac +- else +- $run eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"' +- $run eval 'grep -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T' +- $run eval 'mv "$nlist"T "$nlist"' +- case $host in +- *cygwin* | *mingw* ) +- $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' +- $run eval 'cat "$nlist" >> "$output_objdir/$outputname.def"' +- ;; +- esac +- fi +- fi ++ -release) ++ prev=release ++ continue ++ ;; + +- for arg in $dlprefiles; do +- $show "extracting global C symbols from \`$arg'" +- name=`$echo "$arg" | ${SED} -e 's%^.*/%%'` +- $run eval '$echo ": $name " >> "$nlist"' +- $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'" +- done ++ -rpath) ++ prev=rpath ++ continue ++ ;; + +- if test -z "$run"; then +- # Make sure we have at least an empty file. +- test -f "$nlist" || : > "$nlist" +- +- if test -n "$exclude_expsyms"; then +- $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T +- $mv "$nlist"T "$nlist" +- fi ++ -R) ++ prev=xrpath ++ continue ++ ;; + +- # Try sorting and uniquifying the output. +- if grep -v "^: " < "$nlist" | +- if sort -k 3 /dev/null 2>&1; then +- sort -k 3 +- else +- sort +2 +- fi | +- uniq > "$nlist"S; then +- : +- else +- grep -v "^: " < "$nlist" > "$nlist"S +- fi ++ -R*) ++ func_stripname '-R' '' "$arg" ++ dir=$func_stripname_result ++ # We need an absolute path. ++ case $dir in ++ [\\/]* | [A-Za-z]:[\\/]*) ;; ++ *) ++ func_fatal_error "only absolute run-paths are allowed" ++ ;; ++ esac ++ case "$xrpath " in ++ *" $dir "*) ;; ++ *) xrpath="$xrpath $dir" ;; ++ esac ++ continue ++ ;; + +- if test -f "$nlist"S; then +- eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"' +- else +- $echo '/* NONE */' >> "$output_objdir/$dlsyms" +- fi ++ -shared) ++ # The effects of -shared are defined in a previous loop. ++ continue ++ ;; + +- $echo >> "$output_objdir/$dlsyms" "\ ++ -shrext) ++ prev=shrext ++ continue ++ ;; + +-#undef lt_preloaded_symbols ++ -static | -static-libtool-libs) ++ # The effects of -static are defined in a previous loop. ++ # We used to do the same as -all-static on platforms that ++ # didn't have a PIC flag, but the assumption that the effects ++ # would be equivalent was wrong. It would break on at least ++ # Digital Unix and AIX. ++ continue ++ ;; + +-#if defined (__STDC__) && __STDC__ +-# define lt_ptr void * +-#else +-# define lt_ptr char * +-# define const +-#endif ++ -thread-safe) ++ thread_safe=yes ++ continue ++ ;; + +-/* The mapping between symbol names and symbols. */ +-" ++ -version-info) ++ prev=vinfo ++ continue ++ ;; + +- case $host in +- *cygwin* | *mingw* ) +- $echo >> "$output_objdir/$dlsyms" "\ +-/* DATA imports from DLLs on WIN32 can't be const, because +- runtime relocations are performed -- see ld's documentation +- on pseudo-relocs */ +-struct { +-" +- ;; +- * ) +- $echo >> "$output_objdir/$dlsyms" "\ +-const struct { +-" +- ;; +- esac ++ -version-number) ++ prev=vinfo ++ vinfo_number=yes ++ continue ++ ;; + ++ -weak) ++ prev=weak ++ continue ++ ;; + +- $echo >> "$output_objdir/$dlsyms" "\ +- const char *name; +- lt_ptr address; +-} +-lt_preloaded_symbols[] = +-{\ +-" ++ -Wc,*) ++ func_stripname '-Wc,' '' "$arg" ++ args=$func_stripname_result ++ arg= ++ save_ifs="$IFS"; IFS=',' ++ for flag in $args; do ++ IFS="$save_ifs" ++ func_quote_for_eval "$flag" ++ arg="$arg $wl$func_quote_for_eval_result" ++ compiler_flags="$compiler_flags $func_quote_for_eval_result" ++ done ++ IFS="$save_ifs" ++ func_stripname ' ' '' "$arg" ++ arg=$func_stripname_result ++ ;; + +- eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$dlsyms" ++ -Wl,*) ++ func_stripname '-Wl,' '' "$arg" ++ args=$func_stripname_result ++ arg= ++ save_ifs="$IFS"; IFS=',' ++ for flag in $args; do ++ IFS="$save_ifs" ++ func_quote_for_eval "$flag" ++ arg="$arg $wl$func_quote_for_eval_result" ++ compiler_flags="$compiler_flags $wl$func_quote_for_eval_result" ++ linker_flags="$linker_flags $func_quote_for_eval_result" ++ done ++ IFS="$save_ifs" ++ func_stripname ' ' '' "$arg" ++ arg=$func_stripname_result ++ ;; + +- $echo >> "$output_objdir/$dlsyms" "\ +- {0, (lt_ptr) 0} +-}; ++ -Xcompiler) ++ prev=xcompiler ++ continue ++ ;; + +-/* This works around a problem in FreeBSD linker */ +-#ifdef FREEBSD_WORKAROUND +-static const void *lt_preloaded_setup() { +- return lt_preloaded_symbols; +-} +-#endif ++ -Xlinker) ++ prev=xlinker ++ continue ++ ;; + +-#ifdef __cplusplus +-} +-#endif\ +-" +- fi ++ -XCClinker) ++ prev=xcclinker ++ continue ++ ;; + +- pic_flag_for_symtable= +- case $host in +- # compiling the symbol table file with pic_flag works around +- # a FreeBSD bug that causes programs to crash when -lm is +- # linked before any other PIC object. But we must not use +- # pic_flag when linking with -static. The problem exists in +- # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1. +- *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*) +- case "$compile_command " in +- *" -static "*) ;; +- *) pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND";; +- esac;; +- *-*-hpux*) +- case "$compile_command " in +- *" -static "*) ;; +- *) pic_flag_for_symtable=" $pic_flag";; +- esac +- esac ++ # -msg_* for osf cc ++ -msg_*) ++ func_quote_for_eval "$arg" ++ arg="$func_quote_for_eval_result" ++ ;; + +- # Now compile the dynamic symbol file. +- $show "(cd $output_objdir && $LTCC $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")" +- $run eval '(cd $output_objdir && $LTCC $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $? +- +- # Clean up the generated files. +- $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T" +- $run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T" +- +- # Transform the symbol file into the correct name. +- case $host in +- *cygwin* | *mingw* ) +- if test -f "$output_objdir/${outputname}.def" ; then +- compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%" | $NL2SP` +- finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%" | $NL2SP` +- else +- compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP` +- finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP` +- fi +- ;; +- * ) +- compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP` +- finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP` +- ;; +- esac +- ;; +- *) +- $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2 +- exit $EXIT_FAILURE +- ;; +- esac +- else +- # We keep going just in case the user didn't refer to +- # lt_preloaded_symbols. The linker will fail if global_symbol_pipe +- # really was required. ++ # -64, -mips[0-9] enable 64-bit mode on the SGI compiler ++ # -r[0-9][0-9]* specifies the processor on the SGI compiler ++ # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler ++ # +DA*, +DD* enable 64-bit mode on the HP compiler ++ # -q* pass through compiler args for the IBM compiler ++ # -m*, -t[45]*, -txscale* pass through architecture-specific ++ # compiler args for GCC ++ # -F/path gives path to uninstalled frameworks, gcc on darwin ++ # -p, -pg, --coverage, -fprofile-* pass through profiling flag for GCC ++ # @file GCC response files ++ -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \ ++ -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*) ++ func_quote_for_eval "$arg" ++ arg="$func_quote_for_eval_result" ++ func_append compile_command " $arg" ++ func_append finalize_command " $arg" ++ compiler_flags="$compiler_flags $arg" ++ continue ++ ;; + +- # Nullify the symbol file. +- compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s% @SYMFILE@%%" | $NL2SP` +- finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s% @SYMFILE@%%" | $NL2SP` +- fi ++ # Some other compiler flag. ++ -* | +*) ++ func_quote_for_eval "$arg" ++ arg="$func_quote_for_eval_result" ++ ;; + +- if test "$need_relink" = no || test "$build_libtool_libs" != yes; then +- # Replace the output file specification. +- compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e 's%@OUTPUT@%'"$output"'%g' | $NL2SP` +- link_command="$compile_command$compile_rpath" ++ *.$objext) ++ # A standard object. ++ objs="$objs $arg" ++ ;; + +- # We have no uninstalled library dependencies, so finalize right now. +- $show "$link_command" +- $run eval "$link_command" +- exit_status=$? ++ *.lo) ++ # A libtool-controlled object. + +- # Delete the generated files. +- if test -n "$dlsyms"; then +- $show "$rm $output_objdir/${outputname}S.${objext}" +- $run $rm "$output_objdir/${outputname}S.${objext}" +- fi ++ # Check to see that this really is a libtool object. ++ if func_lalib_unsafe_p "$arg"; then ++ pic_object= ++ non_pic_object= + +- exit $exit_status +- fi ++ # Read the .lo file ++ func_source "$arg" + +- if test -n "$shlibpath_var"; then +- # We should set the shlibpath_var +- rpath= +- for dir in $temp_rpath; do +- case $dir in +- [\\/]* | [A-Za-z]:[\\/]*) +- # Absolute path. +- rpath="$rpath$dir:" +- ;; +- *) +- # Relative path: add a thisdir entry. +- rpath="$rpath\$thisdir/$dir:" +- ;; +- esac +- done +- temp_rpath="$rpath" +- fi ++ if test -z "$pic_object" || ++ test -z "$non_pic_object" || ++ test "$pic_object" = none && ++ test "$non_pic_object" = none; then ++ func_fatal_error "cannot find name of object for \`$arg'" ++ fi + +- if test -n "$compile_shlibpath$finalize_shlibpath"; then +- compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command" +- fi +- if test -n "$finalize_shlibpath"; then +- finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command" +- fi ++ # Extract subdirectory from the argument. ++ func_dirname "$arg" "/" "" ++ xdir="$func_dirname_result" + +- compile_var= +- finalize_var= +- if test -n "$runpath_var"; then +- if test -n "$perm_rpath"; then +- # We should set the runpath_var. +- rpath= +- for dir in $perm_rpath; do +- rpath="$rpath$dir:" +- done +- compile_var="$runpath_var=\"$rpath\$$runpath_var\" " +- fi +- if test -n "$finalize_perm_rpath"; then +- # We should set the runpath_var. +- rpath= +- for dir in $finalize_perm_rpath; do +- rpath="$rpath$dir:" +- done +- finalize_var="$runpath_var=\"$rpath\$$runpath_var\" " +- fi +- fi ++ if test "$pic_object" != none; then ++ # Prepend the subdirectory the object is found in. ++ pic_object="$xdir$pic_object" + +- if test "$no_install" = yes; then +- # We don't need to create a wrapper script. +- link_command="$compile_var$compile_command$compile_rpath" +- # Replace the output file specification. +- link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` +- # Delete the old output file. +- $run $rm $output +- # Link the executable and exit +- $show "$link_command" +- $run eval "$link_command" || exit $? +- exit $EXIT_SUCCESS +- fi ++ if test "$prev" = dlfiles; then ++ if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then ++ dlfiles="$dlfiles $pic_object" ++ prev= ++ continue ++ else ++ # If libtool objects are unsupported, then we need to preload. ++ prev=dlprefiles ++ fi ++ fi + +- if test "$hardcode_action" = relink; then +- # Fast installation is not supported +- link_command="$compile_var$compile_command$compile_rpath" +- relink_command="$finalize_var$finalize_command$finalize_rpath" ++ # CHECK ME: I think I busted this. -Ossama ++ if test "$prev" = dlprefiles; then ++ # Preload the old-style object. ++ dlprefiles="$dlprefiles $pic_object" ++ prev= ++ fi + +- $echo "$modename: warning: this platform does not like uninstalled shared libraries" 1>&2 +- $echo "$modename: \`$output' will be relinked during installation" 1>&2 +- else +- if test "$fast_install" != no; then +- link_command="$finalize_var$compile_command$finalize_rpath" +- if test "$fast_install" = yes; then +- relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $SP2NL | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g' | $NL2SP` ++ # A PIC object. ++ func_append libobjs " $pic_object" ++ arg="$pic_object" ++ fi ++ ++ # Non-PIC object. ++ if test "$non_pic_object" != none; then ++ # Prepend the subdirectory the object is found in. ++ non_pic_object="$xdir$non_pic_object" ++ ++ # A standard non-PIC object ++ func_append non_pic_objects " $non_pic_object" ++ if test -z "$pic_object" || test "$pic_object" = none ; then ++ arg="$non_pic_object" ++ fi + else +- # fast_install is set to needless +- relink_command= ++ # If the PIC object exists, use it instead. ++ # $xdir was prepended to $pic_object above. ++ non_pic_object="$pic_object" ++ func_append non_pic_objects " $non_pic_object" + fi + else +- link_command="$compile_var$compile_command$compile_rpath" +- relink_command="$finalize_var$finalize_command$finalize_rpath" +- fi +- fi ++ # Only an error if not doing a dry-run. ++ if $opt_dry_run; then ++ # Extract subdirectory from the argument. ++ func_dirname "$arg" "/" "" ++ xdir="$func_dirname_result" + +- # Replace the output file specification. +- link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` ++ func_lo2o "$arg" ++ pic_object=$xdir$objdir/$func_lo2o_result ++ non_pic_object=$xdir$func_lo2o_result ++ func_append libobjs " $pic_object" ++ func_append non_pic_objects " $non_pic_object" ++ else ++ func_fatal_error "\`$arg' is not a valid libtool object" ++ fi ++ fi ++ ;; + +- # Delete the old output files. +- $run $rm $output $output_objdir/$outputname $output_objdir/lt-$outputname ++ *.$libext) ++ # An archive. ++ deplibs="$deplibs $arg" ++ old_deplibs="$old_deplibs $arg" ++ continue ++ ;; + +- $show "$link_command" +- $run eval "$link_command" || exit $? ++ *.la) ++ # A libtool-controlled library. + +- # Now create the wrapper script. +- $show "creating $output" ++ if test "$prev" = dlfiles; then ++ # This library was specified with -dlopen. ++ dlfiles="$dlfiles $arg" ++ prev= ++ elif test "$prev" = dlprefiles; then ++ # The library was specified with -dlpreopen. ++ dlprefiles="$dlprefiles $arg" ++ prev= ++ else ++ deplibs="$deplibs $arg" ++ fi ++ continue ++ ;; + +- # Quote the relink command for shipping. +- if test -n "$relink_command"; then +- # Preserve any variables that may affect compiler behavior +- for var in $variables_saved_for_relink; do +- if eval test -z \"\${$var+set}\"; then +- relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command" +- elif eval var_value=\$$var; test -z "$var_value"; then +- relink_command="$var=; export $var; $relink_command" +- else +- var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"` +- relink_command="$var=\"$var_value\"; export $var; $relink_command" +- fi +- done +- relink_command="(cd `pwd`; $relink_command)" +- relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e "$sed_quote_subst" | $NL2SP` +- fi ++ # Some other compiler argument. ++ *) ++ # Unknown arguments in both finalize_command and compile_command need ++ # to be aesthetically quoted because they are evaled later. ++ func_quote_for_eval "$arg" ++ arg="$func_quote_for_eval_result" ++ ;; ++ esac # arg + +- # Quote $echo for shipping. +- if test "X$echo" = "X$SHELL $progpath --fallback-echo"; then +- case $progpath in +- [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";; +- *) qecho="$SHELL `pwd`/$progpath --fallback-echo";; +- esac +- qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"` +- else +- qecho=`$echo "X$echo" | $Xsed -e "$sed_quote_subst"` ++ # Now actually substitute the argument into the commands. ++ if test -n "$arg"; then ++ func_append compile_command " $arg" ++ func_append finalize_command " $arg" + fi ++ done # argument parsing loop + +- # Only actually do things if our run command is non-null. +- if test -z "$run"; then +- # win32 will think the script is a binary if it has +- # a .exe suffix, so we strip it off here. +- case $output in +- *.exe) output=`$echo $output|${SED} 's,.exe$,,'` ;; +- esac +- # test for cygwin because mv fails w/o .exe extensions +- case $host in +- *cygwin*) +- exeext=.exe +- outputname=`$echo $outputname|${SED} 's,.exe$,,'` ;; +- *) exeext= ;; +- esac +- case $host in +- *cygwin* | *mingw* ) +- output_name=`basename $output` +- output_path=`dirname $output` +- cwrappersource="$output_path/$objdir/lt-$output_name.c" +- cwrapper="$output_path/$output_name.exe" +- $rm $cwrappersource $cwrapper +- trap "$rm $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15 ++ test -n "$prev" && \ ++ func_fatal_help "the \`$prevarg' option requires an argument" + +- cat > $cwrappersource <> $cwrappersource<<"EOF" +-#include +-#include +-#include +-#include +-#include +-#include +-#include +-#include +-#include ++ # Determine the type of output ++ case $output in ++ "") ++ func_fatal_help "you must specify an output file" ++ ;; ++ *.$libext) linkmode=oldlib ;; ++ *.lo | *.$objext) linkmode=obj ;; ++ *.la) linkmode=lib ;; ++ *) linkmode=prog ;; # Anything else should be a program. ++ esac + +-#if defined(PATH_MAX) +-# define LT_PATHMAX PATH_MAX +-#elif defined(MAXPATHLEN) +-# define LT_PATHMAX MAXPATHLEN +-#else +-# define LT_PATHMAX 1024 +-#endif ++ specialdeplibs= + +-#ifndef DIR_SEPARATOR +-# define DIR_SEPARATOR '/' +-# define PATH_SEPARATOR ':' +-#endif ++ libs= ++ # Find all interdependent deplibs by searching for libraries ++ # that are linked more than once (e.g. -la -lb -la) ++ for deplib in $deplibs; do ++ if $opt_duplicate_deps ; then ++ case "$libs " in ++ *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; ++ esac ++ fi ++ libs="$libs $deplib" ++ done + +-#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \ +- defined (__OS2__) +-# define HAVE_DOS_BASED_FILE_SYSTEM +-# ifndef DIR_SEPARATOR_2 +-# define DIR_SEPARATOR_2 '\\' +-# endif +-# ifndef PATH_SEPARATOR_2 +-# define PATH_SEPARATOR_2 ';' +-# endif +-#endif ++ if test "$linkmode" = lib; then ++ libs="$predeps $libs $compiler_lib_search_path $postdeps" + +-#ifndef DIR_SEPARATOR_2 +-# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR) +-#else /* DIR_SEPARATOR_2 */ +-# define IS_DIR_SEPARATOR(ch) \ +- (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2)) +-#endif /* DIR_SEPARATOR_2 */ ++ # Compute libraries that are listed more than once in $predeps ++ # $postdeps and mark them as special (i.e., whose duplicates are ++ # not to be eliminated). ++ pre_post_deps= ++ if $opt_duplicate_compiler_generated_deps; then ++ for pre_post_dep in $predeps $postdeps; do ++ case "$pre_post_deps " in ++ *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;; ++ esac ++ pre_post_deps="$pre_post_deps $pre_post_dep" ++ done ++ fi ++ pre_post_deps= ++ fi + +-#ifndef PATH_SEPARATOR_2 +-# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR) +-#else /* PATH_SEPARATOR_2 */ +-# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2) +-#endif /* PATH_SEPARATOR_2 */ ++ deplibs= ++ newdependency_libs= ++ newlib_search_path= ++ need_relink=no # whether we're linking any uninstalled libtool libraries ++ notinst_deplibs= # not-installed libtool libraries ++ notinst_path= # paths that contain not-installed libtool libraries + +-#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type))) +-#define XFREE(stale) do { \ +- if (stale) { free ((void *) stale); stale = 0; } \ +-} while (0) ++ case $linkmode in ++ lib) ++ passes="conv dlpreopen link" ++ for file in $dlfiles $dlprefiles; do ++ case $file in ++ *.la) ;; ++ *) ++ func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file" ++ ;; ++ esac ++ done ++ ;; ++ prog) ++ compile_deplibs= ++ finalize_deplibs= ++ alldeplibs=no ++ newdlfiles= ++ newdlprefiles= ++ passes="conv scan dlopen dlpreopen link" ++ ;; ++ *) passes="conv" ++ ;; ++ esac + +-/* -DDEBUG is fairly common in CFLAGS. */ +-#undef DEBUG +-#if defined DEBUGWRAPPER +-# define DEBUG(format, ...) fprintf(stderr, format, __VA_ARGS__) +-#else +-# define DEBUG(format, ...) +-#endif ++ for pass in $passes; do ++ # The preopen pass in lib mode reverses $deplibs; put it back here ++ # so that -L comes before libs that need it for instance... ++ if test "$linkmode,$pass" = "lib,link"; then ++ ## FIXME: Find the place where the list is rebuilt in the wrong ++ ## order, and fix it there properly ++ tmp_deplibs= ++ for deplib in $deplibs; do ++ tmp_deplibs="$deplib $tmp_deplibs" ++ done ++ deplibs="$tmp_deplibs" ++ fi + +-const char *program_name = NULL; ++ if test "$linkmode,$pass" = "lib,link" || ++ test "$linkmode,$pass" = "prog,scan"; then ++ libs="$deplibs" ++ deplibs= ++ fi ++ if test "$linkmode" = prog; then ++ case $pass in ++ dlopen) libs="$dlfiles" ;; ++ dlpreopen) libs="$dlprefiles" ;; ++ link) ++ libs="$deplibs %DEPLIBS%" ++ test "X$link_all_deplibs" != Xno && libs="$libs $dependency_libs" ++ ;; ++ esac ++ fi ++ if test "$linkmode,$pass" = "lib,dlpreopen"; then ++ # Collect and forward deplibs of preopened libtool libs ++ for lib in $dlprefiles; do ++ # Ignore non-libtool-libs ++ dependency_libs= ++ case $lib in ++ *.la) func_source "$lib" ;; ++ esac + +-void * xmalloc (size_t num); +-char * xstrdup (const char *string); +-const char * base_name (const char *name); +-char * find_executable(const char *wrapper); +-int check_executable(const char *path); +-char * strendzap(char *str, const char *pat); +-void lt_fatal (const char *message, ...); ++ # Collect preopened libtool deplibs, except any this library ++ # has declared as weak libs ++ for deplib in $dependency_libs; do ++ deplib_base=`$ECHO "X$deplib" | $Xsed -e "$basename"` ++ case " $weak_libs " in ++ *" $deplib_base "*) ;; ++ *) deplibs="$deplibs $deplib" ;; ++ esac ++ done ++ done ++ libs="$dlprefiles" ++ fi ++ if test "$pass" = dlopen; then ++ # Collect dlpreopened libraries ++ save_deplibs="$deplibs" ++ deplibs= ++ fi + +-int +-main (int argc, char *argv[]) +-{ +- char **newargz; +- int i; ++ for deplib in $libs; do ++ lib= ++ found=no ++ case $deplib in ++ -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads) ++ if test "$linkmode,$pass" = "prog,link"; then ++ compile_deplibs="$deplib $compile_deplibs" ++ finalize_deplibs="$deplib $finalize_deplibs" ++ else ++ compiler_flags="$compiler_flags $deplib" ++ if test "$linkmode" = lib ; then ++ case "$new_inherited_linker_flags " in ++ *" $deplib "*) ;; ++ * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;; ++ esac ++ fi ++ fi ++ continue ++ ;; ++ -l*) ++ if test "$linkmode" != lib && test "$linkmode" != prog; then ++ func_warning "\`-l' is ignored for archives/objects" ++ continue ++ fi ++ func_stripname '-l' '' "$deplib" ++ name=$func_stripname_result ++ if test "$linkmode" = lib; then ++ searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path" ++ else ++ searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path" ++ fi ++ for searchdir in $searchdirs; do ++ for search_ext in .la $std_shrext .so .a; do ++ # Search the libtool library ++ lib="$searchdir/lib${name}${search_ext}" ++ if test -f "$lib"; then ++ if test "$search_ext" = ".la"; then ++ found=yes ++ else ++ found=no ++ fi ++ break 2 ++ fi ++ done ++ done ++ if test "$found" != yes; then ++ # deplib doesn't seem to be a libtool library ++ if test "$linkmode,$pass" = "prog,link"; then ++ compile_deplibs="$deplib $compile_deplibs" ++ finalize_deplibs="$deplib $finalize_deplibs" ++ else ++ deplibs="$deplib $deplibs" ++ test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" ++ fi ++ continue ++ else # deplib is a libtool library ++ # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib, ++ # We need to do some special things here, and not later. ++ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then ++ case " $predeps $postdeps " in ++ *" $deplib "*) ++ if func_lalib_p "$lib"; then ++ library_names= ++ old_library= ++ func_source "$lib" ++ for l in $old_library $library_names; do ++ ll="$l" ++ done ++ if test "X$ll" = "X$old_library" ; then # only static version available ++ found=no ++ func_dirname "$lib" "" "." ++ ladir="$func_dirname_result" ++ lib=$ladir/$old_library ++ if test "$linkmode,$pass" = "prog,link"; then ++ compile_deplibs="$deplib $compile_deplibs" ++ finalize_deplibs="$deplib $finalize_deplibs" ++ else ++ deplibs="$deplib $deplibs" ++ test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" ++ fi ++ continue ++ fi ++ fi ++ ;; ++ *) ;; ++ esac ++ fi ++ fi ++ ;; # -l ++ *.ltframework) ++ if test "$linkmode,$pass" = "prog,link"; then ++ compile_deplibs="$deplib $compile_deplibs" ++ finalize_deplibs="$deplib $finalize_deplibs" ++ else ++ deplibs="$deplib $deplibs" ++ if test "$linkmode" = lib ; then ++ case "$new_inherited_linker_flags " in ++ *" $deplib "*) ;; ++ * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;; ++ esac ++ fi ++ fi ++ continue ++ ;; ++ -L*) ++ case $linkmode in ++ lib) ++ deplibs="$deplib $deplibs" ++ test "$pass" = conv && continue ++ newdependency_libs="$deplib $newdependency_libs" ++ func_stripname '-L' '' "$deplib" ++ newlib_search_path="$newlib_search_path $func_stripname_result" ++ ;; ++ prog) ++ if test "$pass" = conv; then ++ deplibs="$deplib $deplibs" ++ continue ++ fi ++ if test "$pass" = scan; then ++ deplibs="$deplib $deplibs" ++ else ++ compile_deplibs="$deplib $compile_deplibs" ++ finalize_deplibs="$deplib $finalize_deplibs" ++ fi ++ func_stripname '-L' '' "$deplib" ++ newlib_search_path="$newlib_search_path $func_stripname_result" ++ ;; ++ *) ++ func_warning "\`-L' is ignored for archives/objects" ++ ;; ++ esac # linkmode ++ continue ++ ;; # -L ++ -R*) ++ if test "$pass" = link; then ++ func_stripname '-R' '' "$deplib" ++ dir=$func_stripname_result ++ # Make sure the xrpath contains only unique directories. ++ case "$xrpath " in ++ *" $dir "*) ;; ++ *) xrpath="$xrpath $dir" ;; ++ esac ++ fi ++ deplibs="$deplib $deplibs" ++ continue ++ ;; ++ *.la) lib="$deplib" ;; ++ *.$libext) ++ if test "$pass" = conv; then ++ deplibs="$deplib $deplibs" ++ continue ++ fi ++ case $linkmode in ++ lib) ++ # Linking convenience modules into shared libraries is allowed, ++ # but linking other static libraries is non-portable. ++ case " $dlpreconveniencelibs " in ++ *" $deplib "*) ;; ++ *) ++ valid_a_lib=no ++ case $deplibs_check_method in ++ match_pattern*) ++ set dummy $deplibs_check_method; shift ++ match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` ++ if eval "\$ECHO \"X$deplib\"" 2>/dev/null | $Xsed -e 10q \ ++ | $EGREP "$match_pattern_regex" > /dev/null; then ++ valid_a_lib=yes ++ fi ++ ;; ++ pass_all) ++ valid_a_lib=yes ++ ;; ++ esac ++ if test "$valid_a_lib" != yes; then ++ $ECHO ++ $ECHO "*** Warning: Trying to link with static lib archive $deplib." ++ $ECHO "*** I have the capability to make that library automatically link in when" ++ $ECHO "*** you link to this library. But I can only do this if you have a" ++ $ECHO "*** shared version of the library, which you do not appear to have" ++ $ECHO "*** because the file extensions .$libext of this argument makes me believe" ++ $ECHO "*** that it is just a static archive that I should not use here." ++ else ++ $ECHO ++ $ECHO "*** Warning: Linking the shared library $output against the" ++ $ECHO "*** static library $deplib is not portable!" ++ deplibs="$deplib $deplibs" ++ fi ++ ;; ++ esac ++ continue ++ ;; ++ prog) ++ if test "$pass" != link; then ++ deplibs="$deplib $deplibs" ++ else ++ compile_deplibs="$deplib $compile_deplibs" ++ finalize_deplibs="$deplib $finalize_deplibs" ++ fi ++ continue ++ ;; ++ esac # linkmode ++ ;; # *.$libext ++ *.lo | *.$objext) ++ if test "$pass" = conv; then ++ deplibs="$deplib $deplibs" ++ elif test "$linkmode" = prog; then ++ if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then ++ # If there is no dlopen support or we're linking statically, ++ # we need to preload. ++ newdlprefiles="$newdlprefiles $deplib" ++ compile_deplibs="$deplib $compile_deplibs" ++ finalize_deplibs="$deplib $finalize_deplibs" ++ else ++ newdlfiles="$newdlfiles $deplib" ++ fi ++ fi ++ continue ++ ;; ++ %DEPLIBS%) ++ alldeplibs=yes ++ continue ++ ;; ++ esac # case $deplib + +- program_name = (char *) xstrdup (base_name (argv[0])); +- DEBUG("(main) argv[0] : %s\n",argv[0]); +- DEBUG("(main) program_name : %s\n",program_name); +- newargz = XMALLOC(char *, argc+2); +-EOF ++ if test "$found" = yes || test -f "$lib"; then : ++ else ++ func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'" ++ fi + +- cat >> $cwrappersource <> $cwrappersource <<"EOF" +- newargz[1] = find_executable(argv[0]); +- if (newargz[1] == NULL) +- lt_fatal("Couldn't find %s", argv[0]); +- DEBUG("(main) found exe at : %s\n",newargz[1]); +- /* we know the script has the same name, without the .exe */ +- /* so make sure newargz[1] doesn't end in .exe */ +- strendzap(newargz[1],".exe"); +- for (i = 1; i < argc; i++) +- newargz[i+1] = xstrdup(argv[i]); +- newargz[argc+1] = NULL; ++ func_dirname "$lib" "" "." ++ ladir="$func_dirname_result" + +- for (i=0; i> $cwrappersource <> $cwrappersource <> $cwrappersource <<"EOF" +- return 127; +-} ++ # Convert "-framework foo" to "foo.ltframework" ++ if test -n "$inherited_linker_flags"; then ++ tmp_inherited_linker_flags=`$ECHO "X$inherited_linker_flags" | $Xsed -e 's/-framework \([^ $]*\)/\1.ltframework/g'` ++ for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do ++ case " $new_inherited_linker_flags " in ++ *" $tmp_inherited_linker_flag "*) ;; ++ *) new_inherited_linker_flags="$new_inherited_linker_flags $tmp_inherited_linker_flag";; ++ esac ++ done ++ fi ++ dependency_libs=`$ECHO "X $dependency_libs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` ++ if test "$linkmode,$pass" = "lib,link" || ++ test "$linkmode,$pass" = "prog,scan" || ++ { test "$linkmode" != prog && test "$linkmode" != lib; }; then ++ test -n "$dlopen" && dlfiles="$dlfiles $dlopen" ++ test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen" ++ fi + +-void * +-xmalloc (size_t num) +-{ +- void * p = (void *) malloc (num); +- if (!p) +- lt_fatal ("Memory exhausted"); ++ if test "$pass" = conv; then ++ # Only check for convenience libraries ++ deplibs="$lib $deplibs" ++ if test -z "$libdir"; then ++ if test -z "$old_library"; then ++ func_fatal_error "cannot find name of link library for \`$lib'" ++ fi ++ # It is a libtool convenience library, so add in its objects. ++ convenience="$convenience $ladir/$objdir/$old_library" ++ old_convenience="$old_convenience $ladir/$objdir/$old_library" ++ elif test "$linkmode" != prog && test "$linkmode" != lib; then ++ func_fatal_error "\`$lib' is not a convenience library" ++ fi ++ tmp_libs= ++ for deplib in $dependency_libs; do ++ deplibs="$deplib $deplibs" ++ if $opt_duplicate_deps ; then ++ case "$tmp_libs " in ++ *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; ++ esac ++ fi ++ tmp_libs="$tmp_libs $deplib" ++ done ++ continue ++ fi # $pass = conv + +- return p; +-} + +-char * +-xstrdup (const char *string) +-{ +- return string ? strcpy ((char *) xmalloc (strlen (string) + 1), string) : NULL +-; +-} ++ # Get the name of the library we link against. ++ linklib= ++ for l in $old_library $library_names; do ++ linklib="$l" ++ done ++ if test -z "$linklib"; then ++ func_fatal_error "cannot find name of link library for \`$lib'" ++ fi + +-const char * +-base_name (const char *name) +-{ +- const char *base; ++ # This library was specified with -dlopen. ++ if test "$pass" = dlopen; then ++ if test -z "$libdir"; then ++ func_fatal_error "cannot -dlopen a convenience library: \`$lib'" ++ fi ++ if test -z "$dlname" || ++ test "$dlopen_support" != yes || ++ test "$build_libtool_libs" = no; then ++ # If there is no dlname, no dlopen support or we're linking ++ # statically, we need to preload. We also need to preload any ++ # dependent libraries so libltdl's deplib preloader doesn't ++ # bomb out in the load deplibs phase. ++ dlprefiles="$dlprefiles $lib $dependency_libs" ++ else ++ newdlfiles="$newdlfiles $lib" ++ fi ++ continue ++ fi # $pass = dlopen + +-#if defined (HAVE_DOS_BASED_FILE_SYSTEM) +- /* Skip over the disk name in MSDOS pathnames. */ +- if (isalpha ((unsigned char)name[0]) && name[1] == ':') +- name += 2; +-#endif ++ # We need an absolute path. ++ case $ladir in ++ [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;; ++ *) ++ abs_ladir=`cd "$ladir" && pwd` ++ if test -z "$abs_ladir"; then ++ func_warning "cannot determine absolute directory name of \`$ladir'" ++ func_warning "passing it literally to the linker, although it might fail" ++ abs_ladir="$ladir" ++ fi ++ ;; ++ esac ++ func_basename "$lib" ++ laname="$func_basename_result" + +- for (base = name; *name; name++) +- if (IS_DIR_SEPARATOR (*name)) +- base = name + 1; +- return base; +-} ++ # Find the relevant object directory and library name. ++ if test "X$installed" = Xyes; then ++ if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then ++ func_warning "library \`$lib' was moved." ++ dir="$ladir" ++ absdir="$abs_ladir" ++ libdir="$abs_ladir" ++ else ++ dir="$libdir" ++ absdir="$libdir" ++ fi ++ test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes ++ else ++ if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then ++ dir="$ladir" ++ absdir="$abs_ladir" ++ # Remove this search path later ++ notinst_path="$notinst_path $abs_ladir" ++ else ++ dir="$ladir/$objdir" ++ absdir="$abs_ladir/$objdir" ++ # Remove this search path later ++ notinst_path="$notinst_path $abs_ladir" ++ fi ++ fi # $installed = yes ++ func_stripname 'lib' '.la' "$laname" ++ name=$func_stripname_result + +-int +-check_executable(const char * path) +-{ +- struct stat st; ++ # This library was specified with -dlpreopen. ++ if test "$pass" = dlpreopen; then ++ if test -z "$libdir" && test "$linkmode" = prog; then ++ func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'" ++ fi ++ # Prefer using a static library (so that no silly _DYNAMIC symbols ++ # are required to link). ++ if test -n "$old_library"; then ++ newdlprefiles="$newdlprefiles $dir/$old_library" ++ # Keep a list of preopened convenience libraries to check ++ # that they are being used correctly in the link pass. ++ test -z "$libdir" && \ ++ dlpreconveniencelibs="$dlpreconveniencelibs $dir/$old_library" ++ # Otherwise, use the dlname, so that lt_dlopen finds it. ++ elif test -n "$dlname"; then ++ newdlprefiles="$newdlprefiles $dir/$dlname" ++ else ++ newdlprefiles="$newdlprefiles $dir/$linklib" ++ fi ++ fi # $pass = dlpreopen + +- DEBUG("(check_executable) : %s\n", path ? (*path ? path : "EMPTY!") : "NULL!"); +- if ((!path) || (!*path)) +- return 0; ++ if test -z "$libdir"; then ++ # Link the convenience library ++ if test "$linkmode" = lib; then ++ deplibs="$dir/$old_library $deplibs" ++ elif test "$linkmode,$pass" = "prog,link"; then ++ compile_deplibs="$dir/$old_library $compile_deplibs" ++ finalize_deplibs="$dir/$old_library $finalize_deplibs" ++ else ++ deplibs="$lib $deplibs" # used for prog,scan pass ++ fi ++ continue ++ fi + +- if ((stat (path, &st) >= 0) && +- ( +- /* MinGW & native WIN32 do not support S_IXOTH or S_IXGRP */ +-#if defined (S_IXOTH) +- ((st.st_mode & S_IXOTH) == S_IXOTH) || +-#endif +-#if defined (S_IXGRP) +- ((st.st_mode & S_IXGRP) == S_IXGRP) || +-#endif +- ((st.st_mode & S_IXUSR) == S_IXUSR)) +- ) +- return 1; +- else +- return 0; +-} + +-/* Searches for the full path of the wrapper. Returns +- newly allocated full path name if found, NULL otherwise */ +-char * +-find_executable (const char* wrapper) +-{ +- int has_slash = 0; +- const char* p; +- const char* p_next; +- /* static buffer for getcwd */ +- char tmp[LT_PATHMAX + 1]; +- int tmp_len; +- char* concat_name; ++ if test "$linkmode" = prog && test "$pass" != link; then ++ newlib_search_path="$newlib_search_path $ladir" ++ deplibs="$lib $deplibs" + +- DEBUG("(find_executable) : %s\n", wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!"); ++ linkalldeplibs=no ++ if test "$link_all_deplibs" != no || test -z "$library_names" || ++ test "$build_libtool_libs" = no; then ++ linkalldeplibs=yes ++ fi + +- if ((wrapper == NULL) || (*wrapper == '\0')) +- return NULL; ++ tmp_libs= ++ for deplib in $dependency_libs; do ++ case $deplib in ++ -L*) func_stripname '-L' '' "$deplib" ++ newlib_search_path="$newlib_search_path $func_stripname_result" ++ ;; ++ esac ++ # Need to link against all dependency_libs? ++ if test "$linkalldeplibs" = yes; then ++ deplibs="$deplib $deplibs" ++ else ++ # Need to hardcode shared library paths ++ # or/and link against static libraries ++ newdependency_libs="$deplib $newdependency_libs" ++ fi ++ if $opt_duplicate_deps ; then ++ case "$tmp_libs " in ++ *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; ++ esac ++ fi ++ tmp_libs="$tmp_libs $deplib" ++ done # for deplib ++ continue ++ fi # $linkmode = prog... + +- /* Absolute path? */ +-#if defined (HAVE_DOS_BASED_FILE_SYSTEM) +- if (isalpha ((unsigned char)wrapper[0]) && wrapper[1] == ':') +- { +- concat_name = xstrdup (wrapper); +- if (check_executable(concat_name)) +- return concat_name; +- XFREE(concat_name); +- } +- else +- { +-#endif +- if (IS_DIR_SEPARATOR (wrapper[0])) +- { +- concat_name = xstrdup (wrapper); +- if (check_executable(concat_name)) +- return concat_name; +- XFREE(concat_name); +- } +-#if defined (HAVE_DOS_BASED_FILE_SYSTEM) +- } +-#endif ++ if test "$linkmode,$pass" = "prog,link"; then ++ if test -n "$library_names" && ++ { { test "$prefer_static_libs" = no || ++ test "$prefer_static_libs,$installed" = "built,yes"; } || ++ test -z "$old_library"; }; then ++ # We need to hardcode the library path ++ if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then ++ # Make sure the rpath contains only unique directories. ++ case "$temp_rpath:" in ++ *"$absdir:"*) ;; ++ *) temp_rpath="$temp_rpath$absdir:" ;; ++ esac ++ fi + +- for (p = wrapper; *p; p++) +- if (*p == '/') +- { +- has_slash = 1; +- break; +- } +- if (!has_slash) +- { +- /* no slashes; search PATH */ +- const char* path = getenv ("PATH"); +- if (path != NULL) +- { +- for (p = path; *p; p = p_next) +- { +- const char* q; +- size_t p_len; +- for (q = p; *q; q++) +- if (IS_PATH_SEPARATOR(*q)) +- break; +- p_len = q - p; +- p_next = (*q == '\0' ? q : q + 1); +- if (p_len == 0) +- { +- /* empty path: current directory */ +- if (getcwd (tmp, LT_PATHMAX) == NULL) +- lt_fatal ("getcwd failed"); +- tmp_len = strlen(tmp); +- concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1); +- memcpy (concat_name, tmp, tmp_len); +- concat_name[tmp_len] = '/'; +- strcpy (concat_name + tmp_len + 1, wrapper); +- } +- else +- { +- concat_name = XMALLOC(char, p_len + 1 + strlen(wrapper) + 1); +- memcpy (concat_name, p, p_len); +- concat_name[p_len] = '/'; +- strcpy (concat_name + p_len + 1, wrapper); +- } +- if (check_executable(concat_name)) +- return concat_name; +- XFREE(concat_name); +- } +- } +- /* not found in PATH; assume curdir */ +- } +- /* Relative path | not found in path: prepend cwd */ +- if (getcwd (tmp, LT_PATHMAX) == NULL) +- lt_fatal ("getcwd failed"); +- tmp_len = strlen(tmp); +- concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1); +- memcpy (concat_name, tmp, tmp_len); +- concat_name[tmp_len] = '/'; +- strcpy (concat_name + tmp_len + 1, wrapper); ++ # Hardcode the library path. ++ # Skip directories that are in the system default run-time ++ # search path. ++ case " $sys_lib_dlsearch_path " in ++ *" $absdir "*) ;; ++ *) ++ case "$compile_rpath " in ++ *" $absdir "*) ;; ++ *) compile_rpath="$compile_rpath $absdir" ++ esac ++ ;; ++ esac ++ case " $sys_lib_dlsearch_path " in ++ *" $libdir "*) ;; ++ *) ++ case "$finalize_rpath " in ++ *" $libdir "*) ;; ++ *) finalize_rpath="$finalize_rpath $libdir" ++ esac ++ ;; ++ esac ++ fi # $linkmode,$pass = prog,link... + +- if (check_executable(concat_name)) +- return concat_name; +- XFREE(concat_name); +- return NULL; +-} +- +-char * +-strendzap(char *str, const char *pat) +-{ +- size_t len, patlen; +- +- assert(str != NULL); +- assert(pat != NULL); +- +- len = strlen(str); +- patlen = strlen(pat); ++ if test "$alldeplibs" = yes && ++ { test "$deplibs_check_method" = pass_all || ++ { test "$build_libtool_libs" = yes && ++ test -n "$library_names"; }; }; then ++ # We only need to search for static libraries ++ continue ++ fi ++ fi + +- if (patlen <= len) +- { +- str += len - patlen; +- if (strcmp(str, pat) == 0) +- *str = '\0'; +- } +- return str; +-} ++ link_static=no # Whether the deplib will be linked statically ++ use_static_libs=$prefer_static_libs ++ if test "$use_static_libs" = built && test "$installed" = yes; then ++ use_static_libs=no ++ fi ++ if test -n "$library_names" && ++ { test "$use_static_libs" = no || test -z "$old_library"; }; then ++ case $host in ++ *cygwin* | *mingw*) ++ # No point in relinking DLLs because paths are not encoded ++ notinst_deplibs="$notinst_deplibs $lib" ++ need_relink=no ++ ;; ++ *) ++ if test "$installed" = no; then ++ notinst_deplibs="$notinst_deplibs $lib" ++ need_relink=yes ++ fi ++ ;; ++ esac ++ # This is a shared library + +-static void +-lt_error_core (int exit_status, const char * mode, +- const char * message, va_list ap) +-{ +- fprintf (stderr, "%s: %s: ", program_name, mode); +- vfprintf (stderr, message, ap); +- fprintf (stderr, ".\n"); ++ # Warn about portability, can't link against -module's on some ++ # systems (darwin). Don't bleat about dlopened modules though! ++ dlopenmodule="" ++ for dlpremoduletest in $dlprefiles; do ++ if test "X$dlpremoduletest" = "X$lib"; then ++ dlopenmodule="$dlpremoduletest" ++ break ++ fi ++ done ++ if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then ++ $ECHO ++ if test "$linkmode" = prog; then ++ $ECHO "*** Warning: Linking the executable $output against the loadable module" ++ else ++ $ECHO "*** Warning: Linking the shared library $output against the loadable module" ++ fi ++ $ECHO "*** $linklib is not portable!" ++ fi ++ if test "$linkmode" = lib && ++ test "$hardcode_into_libs" = yes; then ++ # Hardcode the library path. ++ # Skip directories that are in the system default run-time ++ # search path. ++ case " $sys_lib_dlsearch_path " in ++ *" $absdir "*) ;; ++ *) ++ case "$compile_rpath " in ++ *" $absdir "*) ;; ++ *) compile_rpath="$compile_rpath $absdir" ++ esac ++ ;; ++ esac ++ case " $sys_lib_dlsearch_path " in ++ *" $libdir "*) ;; ++ *) ++ case "$finalize_rpath " in ++ *" $libdir "*) ;; ++ *) finalize_rpath="$finalize_rpath $libdir" ++ esac ++ ;; ++ esac ++ fi + +- if (exit_status >= 0) +- exit (exit_status); +-} ++ if test -n "$old_archive_from_expsyms_cmds"; then ++ # figure out the soname ++ set dummy $library_names ++ shift ++ realname="$1" ++ shift ++ libname=`eval "\\$ECHO \"$libname_spec\""` ++ # use dlname if we got it. it's perfectly good, no? ++ if test -n "$dlname"; then ++ soname="$dlname" ++ elif test -n "$soname_spec"; then ++ # bleh windows ++ case $host in ++ *cygwin* | mingw*) ++ func_arith $current - $age ++ major=$func_arith_result ++ versuffix="-$major" ++ ;; ++ esac ++ eval soname=\"$soname_spec\" ++ else ++ soname="$realname" ++ fi + +-void +-lt_fatal (const char *message, ...) +-{ +- va_list ap; +- va_start (ap, message); +- lt_error_core (EXIT_FAILURE, "FATAL", message, ap); +- va_end (ap); +-} +-EOF +- # we should really use a build-platform specific compiler +- # here, but OTOH, the wrappers (shell script and this C one) +- # are only useful if you want to execute the "real" binary. +- # Since the "real" binary is built for $host, then this +- # wrapper might as well be built for $host, too. +- $run $LTCC $LTCFLAGS -s -o $cwrapper $cwrappersource +- ;; +- esac +- $rm $output +- trap "$rm $output; exit $EXIT_FAILURE" 1 2 15 ++ # Make a new name for the extract_expsyms_cmds to use ++ soroot="$soname" ++ func_basename "$soroot" ++ soname="$func_basename_result" ++ func_stripname 'lib' '.dll' "$soname" ++ newlib=libimp-$func_stripname_result.a + +- $echo > $output "\ +-#! $SHELL ++ # If the library has no export list, then create one now ++ if test -f "$output_objdir/$soname-def"; then : ++ else ++ func_verbose "extracting exported symbol list from \`$soname'" ++ func_execute_cmds "$extract_expsyms_cmds" 'exit $?' ++ fi + +-# $output - temporary wrapper script for $objdir/$outputname +-# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP +-# +-# The $output program cannot be directly executed until all the libtool +-# libraries that it depends on are installed. +-# +-# This wrapper script should never be moved out of the build directory. +-# If it is, it will not operate correctly. ++ # Create $newlib ++ if test -f "$output_objdir/$newlib"; then :; else ++ func_verbose "generating import library for \`$soname'" ++ func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?' ++ fi ++ # make sure the library variables are pointing to the new library ++ dir=$output_objdir ++ linklib=$newlib ++ fi # test -n "$old_archive_from_expsyms_cmds" + +-# Sed substitution that helps us do robust quoting. It backslashifies +-# metacharacters that are still active within double-quoted strings. +-Xsed='${SED} -e 1s/^X//' +-sed_quote_subst='$sed_quote_subst' ++ if test "$linkmode" = prog || test "$mode" != relink; then ++ add_shlibpath= ++ add_dir= ++ add= ++ lib_linked=yes ++ case $hardcode_action in ++ immediate | unsupported) ++ if test "$hardcode_direct" = no; then ++ add="$dir/$linklib" ++ case $host in ++ *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;; ++ *-*-sysv4*uw2*) add_dir="-L$dir" ;; ++ *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \ ++ *-*-unixware7*) add_dir="-L$dir" ;; ++ *-*-darwin* ) ++ # if the lib is a (non-dlopened) module then we can not ++ # link against it, someone is ignoring the earlier warnings ++ if /usr/bin/file -L $add 2> /dev/null | ++ $GREP ": [^:]* bundle" >/dev/null ; then ++ if test "X$dlopenmodule" != "X$lib"; then ++ $ECHO "*** Warning: lib $linklib is a module, not a shared library" ++ if test -z "$old_library" ; then ++ $ECHO ++ $ECHO "*** And there doesn't seem to be a static archive available" ++ $ECHO "*** The link will probably fail, sorry" ++ else ++ add="$dir/$old_library" ++ fi ++ elif test -n "$old_library"; then ++ add="$dir/$old_library" ++ fi ++ fi ++ esac ++ elif test "$hardcode_minus_L" = no; then ++ case $host in ++ *-*-sunos*) add_shlibpath="$dir" ;; ++ esac ++ add_dir="-L$dir" ++ add="-l$name" ++ elif test "$hardcode_shlibpath_var" = no; then ++ add_shlibpath="$dir" ++ add="-l$name" ++ else ++ lib_linked=no ++ fi ++ ;; ++ relink) ++ if test "$hardcode_direct" = yes && ++ test "$hardcode_direct_absolute" = no; then ++ add="$dir/$linklib" ++ elif test "$hardcode_minus_L" = yes; then ++ add_dir="-L$dir" ++ # Try looking first in the location we're being installed to. ++ if test -n "$inst_prefix_dir"; then ++ case $libdir in ++ [\\/]*) ++ add_dir="$add_dir -L$inst_prefix_dir$libdir" ++ ;; ++ esac ++ fi ++ add="-l$name" ++ elif test "$hardcode_shlibpath_var" = yes; then ++ add_shlibpath="$dir" ++ add="-l$name" ++ else ++ lib_linked=no ++ fi ++ ;; ++ *) lib_linked=no ;; ++ esac + +-# Be Bourne compatible (taken from Autoconf:_AS_BOURNE_COMPATIBLE). +-if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then +- emulate sh +- NULLCMD=: +- # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which +- # is contrary to our usage. Disable this feature. +- alias -g '\${1+\"\$@\"}'='\"\$@\"' +- setopt NO_GLOB_SUBST +-else +- case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac +-fi +-BIN_SH=xpg4; export BIN_SH # for Tru64 +-DUALCASE=1; export DUALCASE # for MKS sh ++ if test "$lib_linked" != yes; then ++ func_fatal_configuration "unsupported hardcode properties" ++ fi + +-# The HP-UX ksh and POSIX shell print the target directory to stdout +-# if CDPATH is set. +-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH ++ if test -n "$add_shlibpath"; then ++ case :$compile_shlibpath: in ++ *":$add_shlibpath:"*) ;; ++ *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;; ++ esac ++ fi ++ if test "$linkmode" = prog; then ++ test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs" ++ test -n "$add" && compile_deplibs="$add $compile_deplibs" ++ else ++ test -n "$add_dir" && deplibs="$add_dir $deplibs" ++ test -n "$add" && deplibs="$add $deplibs" ++ if test "$hardcode_direct" != yes && ++ test "$hardcode_minus_L" != yes && ++ test "$hardcode_shlibpath_var" = yes; then ++ case :$finalize_shlibpath: in ++ *":$libdir:"*) ;; ++ *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; ++ esac ++ fi ++ fi ++ fi + +-relink_command=\"$relink_command\" ++ if test "$linkmode" = prog || test "$mode" = relink; then ++ add_shlibpath= ++ add_dir= ++ add= ++ # Finalize command for both is simple: just hardcode it. ++ if test "$hardcode_direct" = yes && ++ test "$hardcode_direct_absolute" = no; then ++ add="$libdir/$linklib" ++ elif test "$hardcode_minus_L" = yes; then ++ add_dir="-L$libdir" ++ add="-l$name" ++ elif test "$hardcode_shlibpath_var" = yes; then ++ case :$finalize_shlibpath: in ++ *":$libdir:"*) ;; ++ *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; ++ esac ++ add="-l$name" ++ elif test "$hardcode_automatic" = yes; then ++ if test -n "$inst_prefix_dir" && ++ test -f "$inst_prefix_dir$libdir/$linklib" ; then ++ add="$inst_prefix_dir$libdir/$linklib" ++ else ++ add="$libdir/$linklib" ++ fi ++ else ++ # We cannot seem to hardcode it, guess we'll fake it. ++ add_dir="-L$libdir" ++ # Try looking first in the location we're being installed to. ++ if test -n "$inst_prefix_dir"; then ++ case $libdir in ++ [\\/]*) ++ add_dir="$add_dir -L$inst_prefix_dir$libdir" ++ ;; ++ esac ++ fi ++ add="-l$name" ++ fi + +-# This environment variable determines our operation mode. +-if test \"\$libtool_install_magic\" = \"$magic\"; then +- # install mode needs the following variable: +- notinst_deplibs='$notinst_deplibs' +-else +- # When we are sourced in execute mode, \$file and \$echo are already set. +- if test \"\$libtool_execute_magic\" != \"$magic\"; then +- echo=\"$qecho\" +- file=\"\$0\" +- # Make sure echo works. +- if test \"X\$1\" = X--no-reexec; then +- # Discard the --no-reexec flag, and continue. +- shift +- elif test \"X\`(\$echo '\t') 2>/dev/null\`\" = 'X\t'; then +- # Yippee, \$echo works! +- : +- else +- # Restart under the correct shell, and then maybe \$echo will work. +- exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"} +- fi +- fi\ +-" +- $echo >> $output "\ +- +- # Find the directory that this script lives in. +- thisdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\` +- test \"x\$thisdir\" = \"x\$file\" && thisdir=. +- +- # Follow symbolic links until we get to the real thisdir. +- file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\` +- while test -n \"\$file\"; do +- destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\` +- +- # If there was a directory component, then change thisdir. +- if test \"x\$destdir\" != \"x\$file\"; then +- case \"\$destdir\" in +- [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;; +- *) thisdir=\"\$thisdir/\$destdir\" ;; +- esac +- fi +- +- file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\` +- file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\` +- done +- +- # Try to get the absolute directory name. +- absdir=\`cd \"\$thisdir\" && pwd\` +- test -n \"\$absdir\" && thisdir=\"\$absdir\" +-" +- +- if test "$fast_install" = yes; then +- $echo >> $output "\ +- program=lt-'$outputname'$exeext +- progdir=\"\$thisdir/$objdir\" ++ if test "$linkmode" = prog; then ++ test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs" ++ test -n "$add" && finalize_deplibs="$add $finalize_deplibs" ++ else ++ test -n "$add_dir" && deplibs="$add_dir $deplibs" ++ test -n "$add" && deplibs="$add $deplibs" ++ fi ++ fi ++ elif test "$linkmode" = prog; then ++ # Here we assume that one of hardcode_direct or hardcode_minus_L ++ # is not unsupported. This is valid on all known static and ++ # shared platforms. ++ if test "$hardcode_direct" != unsupported; then ++ test -n "$old_library" && linklib="$old_library" ++ compile_deplibs="$dir/$linklib $compile_deplibs" ++ finalize_deplibs="$dir/$linklib $finalize_deplibs" ++ else ++ compile_deplibs="-l$name -L$dir $compile_deplibs" ++ finalize_deplibs="-l$name -L$dir $finalize_deplibs" ++ fi ++ elif test "$build_libtool_libs" = yes; then ++ # Not a shared library ++ if test "$deplibs_check_method" != pass_all; then ++ # We're trying link a shared library against a static one ++ # but the system doesn't support it. + +- if test ! -f \"\$progdir/\$program\" || \\ +- { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\ +- test \"X\$file\" != \"X\$progdir/\$program\"; }; then ++ # Just print a warning and add the library to dependency_libs so ++ # that the program can be linked against the static library. ++ $ECHO ++ $ECHO "*** Warning: This system can not link to static lib archive $lib." ++ $ECHO "*** I have the capability to make that library automatically link in when" ++ $ECHO "*** you link to this library. But I can only do this if you have a" ++ $ECHO "*** shared version of the library, which you do not appear to have." ++ if test "$module" = yes; then ++ $ECHO "*** But as you try to build a module library, libtool will still create " ++ $ECHO "*** a static module, that should work as long as the dlopening application" ++ $ECHO "*** is linked with the -dlopen flag to resolve symbols at runtime." ++ if test -z "$global_symbol_pipe"; then ++ $ECHO ++ $ECHO "*** However, this would only work if libtool was able to extract symbol" ++ $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could" ++ $ECHO "*** not find such a program. So, this module is probably useless." ++ $ECHO "*** \`nm' from GNU binutils and a full rebuild may help." ++ fi ++ if test "$build_old_libs" = no; then ++ build_libtool_libs=module ++ build_old_libs=yes ++ else ++ build_libtool_libs=no ++ fi ++ fi ++ else ++ deplibs="$dir/$old_library $deplibs" ++ link_static=yes ++ fi ++ fi # link shared/static library? + +- file=\"\$\$-\$program\" ++ if test "$linkmode" = lib; then ++ if test -n "$dependency_libs" && ++ { test "$hardcode_into_libs" != yes || ++ test "$build_old_libs" = yes || ++ test "$link_static" = yes; }; then ++ # Extract -R from dependency_libs ++ temp_deplibs= ++ for libdir in $dependency_libs; do ++ case $libdir in ++ -R*) func_stripname '-R' '' "$libdir" ++ temp_xrpath=$func_stripname_result ++ case " $xrpath " in ++ *" $temp_xrpath "*) ;; ++ *) xrpath="$xrpath $temp_xrpath";; ++ esac;; ++ *) temp_deplibs="$temp_deplibs $libdir";; ++ esac ++ done ++ dependency_libs="$temp_deplibs" ++ fi + +- if test ! -d \"\$progdir\"; then +- $mkdir \"\$progdir\" +- else +- $rm \"\$progdir/\$file\" +- fi" ++ newlib_search_path="$newlib_search_path $absdir" ++ # Link against this library ++ test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs" ++ # ... and its dependency_libs ++ tmp_libs= ++ for deplib in $dependency_libs; do ++ newdependency_libs="$deplib $newdependency_libs" ++ if $opt_duplicate_deps ; then ++ case "$tmp_libs " in ++ *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; ++ esac ++ fi ++ tmp_libs="$tmp_libs $deplib" ++ done + +- $echo >> $output "\ ++ if test "$link_all_deplibs" != no; then ++ # Add the search paths of all dependency libraries ++ for deplib in $dependency_libs; do ++ case $deplib in ++ -L*) path="$deplib" ;; ++ *.la) ++ func_dirname "$deplib" "" "." ++ dir="$func_dirname_result" ++ # We need an absolute path. ++ case $dir in ++ [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;; ++ *) ++ absdir=`cd "$dir" && pwd` ++ if test -z "$absdir"; then ++ func_warning "cannot determine absolute directory name of \`$dir'" ++ absdir="$dir" ++ fi ++ ;; ++ esac ++ if $GREP "^installed=no" $deplib > /dev/null; then ++ case $host in ++ *-*-darwin*) ++ depdepl= ++ eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib` ++ if test -n "$deplibrary_names" ; then ++ for tmp in $deplibrary_names ; do ++ depdepl=$tmp ++ done ++ if test -f "$absdir/$objdir/$depdepl" ; then ++ depdepl="$absdir/$objdir/$depdepl" ++ darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` ++ if test -z "$darwin_install_name"; then ++ darwin_install_name=`${OTOOL64} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` ++ fi ++ compiler_flags="$compiler_flags ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}" ++ linker_flags="$linker_flags -dylib_file ${darwin_install_name}:${depdepl}" ++ path= ++ fi ++ fi ++ ;; ++ *) ++ path="-L$absdir/$objdir" ++ ;; ++ esac ++ else ++ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` ++ test -z "$libdir" && \ ++ func_fatal_error "\`$deplib' is not a valid libtool archive" ++ test "$absdir" != "$libdir" && \ ++ func_warning "\`$deplib' seems to be moved" + +- # relink executable if necessary +- if test -n \"\$relink_command\"; then +- if relink_command_output=\`eval \$relink_command 2>&1\`; then : +- else +- $echo \"\$relink_command_output\" >&2 +- $rm \"\$progdir/\$file\" +- exit $EXIT_FAILURE ++ path="-L$absdir" ++ fi ++ ;; ++ esac ++ case " $deplibs " in ++ *" $path "*) ;; ++ *) deplibs="$path $deplibs" ;; ++ esac ++ done ++ fi # link_all_deplibs != no ++ fi # linkmode = lib ++ done # for deplib in $libs ++ if test "$pass" = link; then ++ if test "$linkmode" = "prog"; then ++ compile_deplibs="$new_inherited_linker_flags $compile_deplibs" ++ finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs" ++ else ++ compiler_flags="$compiler_flags "`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` ++ fi + fi +- fi ++ dependency_libs="$newdependency_libs" ++ if test "$pass" = dlpreopen; then ++ # Link the dlpreopened libraries before other libraries ++ for deplib in $save_deplibs; do ++ deplibs="$deplib $deplibs" ++ done ++ fi ++ if test "$pass" != dlopen; then ++ if test "$pass" != conv; then ++ # Make sure lib_search_path contains only unique directories. ++ lib_search_path= ++ for dir in $newlib_search_path; do ++ case "$lib_search_path " in ++ *" $dir "*) ;; ++ *) lib_search_path="$lib_search_path $dir" ;; ++ esac ++ done ++ newlib_search_path= ++ fi + +- $mv \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null || +- { $rm \"\$progdir/\$program\"; +- $mv \"\$progdir/\$file\" \"\$progdir/\$program\"; } +- $rm \"\$progdir/\$file\" +- fi" ++ if test "$linkmode,$pass" != "prog,link"; then ++ vars="deplibs" + else +- $echo >> $output "\ +- program='$outputname' +- progdir=\"\$thisdir/$objdir\" +-" ++ vars="compile_deplibs finalize_deplibs" + fi ++ for var in $vars dependency_libs; do ++ # Add libraries to $var in reverse order ++ eval tmp_libs=\"\$$var\" ++ new_libs= ++ for deplib in $tmp_libs; do ++ # FIXME: Pedantically, this is the right thing to do, so ++ # that some nasty dependency loop isn't accidentally ++ # broken: ++ #new_libs="$deplib $new_libs" ++ # Pragmatically, this seems to cause very few problems in ++ # practice: ++ case $deplib in ++ -L*) new_libs="$deplib $new_libs" ;; ++ -R*) ;; ++ *) ++ # And here is the reason: when a library appears more ++ # than once as an explicit dependence of a library, or ++ # is implicitly linked in more than once by the ++ # compiler, it is considered special, and multiple ++ # occurrences thereof are not removed. Compare this ++ # with having the same library being listed as a ++ # dependency of multiple other libraries: in this case, ++ # we know (pedantically, we assume) the library does not ++ # need to be listed more than once, so we keep only the ++ # last copy. This is not always right, but it is rare ++ # enough that we require users that really mean to play ++ # such unportable linking tricks to link the library ++ # using -Wl,-lname, so that libtool does not consider it ++ # for duplicate removal. ++ case " $specialdeplibs " in ++ *" $deplib "*) new_libs="$deplib $new_libs" ;; ++ *) ++ case " $new_libs " in ++ *" $deplib "*) ;; ++ *) new_libs="$deplib $new_libs" ;; ++ esac ++ ;; ++ esac ++ ;; ++ esac ++ done ++ tmp_libs= ++ for deplib in $new_libs; do ++ case $deplib in ++ -L*) ++ case " $tmp_libs " in ++ *" $deplib "*) ;; ++ *) tmp_libs="$tmp_libs $deplib" ;; ++ esac ++ ;; ++ *) tmp_libs="$tmp_libs $deplib" ;; ++ esac ++ done ++ eval $var=\"$tmp_libs\" ++ done # for var ++ fi ++ # Last step: remove runtime libs from dependency_libs ++ # (they stay in deplibs) ++ tmp_libs= ++ for i in $dependency_libs ; do ++ case " $predeps $postdeps $compiler_lib_search_path " in ++ *" $i "*) ++ i="" ++ ;; ++ esac ++ if test -n "$i" ; then ++ tmp_libs="$tmp_libs $i" ++ fi ++ done ++ dependency_libs=$tmp_libs ++ done # for pass ++ if test "$linkmode" = prog; then ++ dlfiles="$newdlfiles" ++ fi ++ if test "$linkmode" = prog || test "$linkmode" = lib; then ++ dlprefiles="$newdlprefiles" ++ fi ++ ++ case $linkmode in ++ oldlib) ++ if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then ++ func_warning "\`-dlopen' is ignored for archives" ++ fi ++ ++ case " $deplibs" in ++ *\ -l* | *\ -L*) ++ func_warning "\`-l' and \`-L' are ignored for archives" ;; ++ esac ++ ++ test -n "$rpath" && \ ++ func_warning "\`-rpath' is ignored for archives" ++ ++ test -n "$xrpath" && \ ++ func_warning "\`-R' is ignored for archives" ++ ++ test -n "$vinfo" && \ ++ func_warning "\`-version-info/-version-number' is ignored for archives" ++ ++ test -n "$release" && \ ++ func_warning "\`-release' is ignored for archives" ++ ++ test -n "$export_symbols$export_symbols_regex" && \ ++ func_warning "\`-export-symbols' is ignored for archives" ++ ++ # Now set the variables for building old libraries. ++ build_libtool_libs=no ++ oldlibs="$output" ++ objs="$objs$old_deplibs" ++ ;; ++ ++ lib) ++ # Make sure we only generate libraries of the form `libNAME.la'. ++ case $outputname in ++ lib*) ++ func_stripname 'lib' '.la' "$outputname" ++ name=$func_stripname_result ++ eval shared_ext=\"$shrext_cmds\" ++ eval libname=\"$libname_spec\" ++ ;; ++ *) ++ test "$module" = no && \ ++ func_fatal_help "libtool library \`$output' must begin with \`lib'" ++ ++ if test "$need_lib_prefix" != no; then ++ # Add the "lib" prefix for modules if required ++ func_stripname '' '.la' "$outputname" ++ name=$func_stripname_result ++ eval shared_ext=\"$shrext_cmds\" ++ eval libname=\"$libname_spec\" ++ else ++ func_stripname '' '.la' "$outputname" ++ libname=$func_stripname_result ++ fi ++ ;; ++ esac ++ ++ if test -n "$objs"; then ++ if test "$deplibs_check_method" != pass_all; then ++ func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs" ++ else ++ $ECHO ++ $ECHO "*** Warning: Linking the shared library $output against the non-libtool" ++ $ECHO "*** objects $objs is not portable!" ++ libobjs="$libobjs $objs" ++ fi ++ fi ++ ++ test "$dlself" != no && \ ++ func_warning "\`-dlopen self' is ignored for libtool libraries" ++ ++ set dummy $rpath ++ shift ++ test "$#" -gt 1 && \ ++ func_warning "ignoring multiple \`-rpath's for a libtool library" ++ ++ install_libdir="$1" ++ ++ oldlibs= ++ if test -z "$rpath"; then ++ if test "$build_libtool_libs" = yes; then ++ # Building a libtool convenience library. ++ # Some compilers have problems with a `.al' extension so ++ # convenience libraries should have the same extension an ++ # archive normally would. ++ oldlibs="$output_objdir/$libname.$libext $oldlibs" ++ build_libtool_libs=convenience ++ build_old_libs=yes ++ fi ++ ++ test -n "$vinfo" && \ ++ func_warning "\`-version-info/-version-number' is ignored for convenience libraries" ++ ++ test -n "$release" && \ ++ func_warning "\`-release' is ignored for convenience libraries" ++ else ++ ++ # Parse the version information argument. ++ save_ifs="$IFS"; IFS=':' ++ set dummy $vinfo 0 0 0 ++ shift ++ IFS="$save_ifs" ++ ++ test -n "$7" && \ ++ func_fatal_help "too many parameters to \`-version-info'" ++ ++ # convert absolute version numbers to libtool ages ++ # this retains compatibility with .la files and attempts ++ # to make the code below a bit more comprehensible ++ ++ case $vinfo_number in ++ yes) ++ number_major="$1" ++ number_minor="$2" ++ number_revision="$3" ++ # ++ # There are really only two kinds -- those that ++ # use the current revision as the major version ++ # and those that subtract age and use age as ++ # a minor version. But, then there is irix ++ # which has an extra 1 added just for fun ++ # ++ case $version_type in ++ darwin|linux|osf|windows|none) ++ func_arith $number_major + $number_minor ++ current=$func_arith_result ++ age="$number_minor" ++ revision="$number_revision" ++ ;; ++ freebsd-aout|freebsd-elf|sunos) ++ current="$number_major" ++ revision="$number_minor" ++ age="0" ++ ;; ++ irix|nonstopux) ++ func_arith $number_major + $number_minor ++ current=$func_arith_result ++ age="$number_minor" ++ revision="$number_minor" ++ lt_irix_increment=no ++ ;; ++ *) ++ func_fatal_configuration "$modename: unknown library version type \`$version_type'" ++ ;; ++ esac ++ ;; ++ no) ++ current="$1" ++ revision="$2" ++ age="$3" ++ ;; ++ esac ++ ++ # Check that each of the things are valid numbers. ++ case $current in ++ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; ++ *) ++ func_error "CURRENT \`$current' must be a nonnegative integer" ++ func_fatal_error "\`$vinfo' is not valid version information" ++ ;; ++ esac ++ ++ case $revision in ++ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; ++ *) ++ func_error "REVISION \`$revision' must be a nonnegative integer" ++ func_fatal_error "\`$vinfo' is not valid version information" ++ ;; ++ esac ++ ++ case $age in ++ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; ++ *) ++ func_error "AGE \`$age' must be a nonnegative integer" ++ func_fatal_error "\`$vinfo' is not valid version information" ++ ;; ++ esac ++ ++ if test "$age" -gt "$current"; then ++ func_error "AGE \`$age' is greater than the current interface number \`$current'" ++ func_fatal_error "\`$vinfo' is not valid version information" ++ fi ++ ++ # Calculate the version variables. ++ major= ++ versuffix= ++ verstring= ++ case $version_type in ++ none) ;; ++ ++ darwin) ++ # Like Linux, but with the current version available in ++ # verstring for coding it into the library header ++ func_arith $current - $age ++ major=.$func_arith_result ++ versuffix="$major.$age.$revision" ++ # Darwin ld doesn't like 0 for these options... ++ func_arith $current + 1 ++ minor_current=$func_arith_result ++ xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision" ++ verstring="-compatibility_version $minor_current -current_version $minor_current.$revision" ++ ;; ++ ++ freebsd-aout) ++ major=".$current" ++ versuffix=".$current.$revision"; ++ ;; ++ ++ freebsd-elf) ++ major=".$current" ++ versuffix=".$current" ++ ;; ++ ++ irix | nonstopux) ++ if test "X$lt_irix_increment" = "Xno"; then ++ func_arith $current - $age ++ else ++ func_arith $current - $age + 1 ++ fi ++ major=$func_arith_result ++ ++ case $version_type in ++ nonstopux) verstring_prefix=nonstopux ;; ++ *) verstring_prefix=sgi ;; ++ esac ++ verstring="$verstring_prefix$major.$revision" ++ ++ # Add in all the interfaces that we are compatible with. ++ loop=$revision ++ while test "$loop" -ne 0; do ++ func_arith $revision - $loop ++ iface=$func_arith_result ++ func_arith $loop - 1 ++ loop=$func_arith_result ++ verstring="$verstring_prefix$major.$iface:$verstring" ++ done ++ ++ # Before this point, $major must not contain `.'. ++ major=.$major ++ versuffix="$major.$revision" ++ ;; ++ ++ linux) ++ func_arith $current - $age ++ major=.$func_arith_result ++ versuffix="$major.$age.$revision" ++ ;; ++ ++ osf) ++ func_arith $current - $age ++ major=.$func_arith_result ++ versuffix=".$current.$age.$revision" ++ verstring="$current.$age.$revision" ++ ++ # Add in all the interfaces that we are compatible with. ++ loop=$age ++ while test "$loop" -ne 0; do ++ func_arith $current - $loop ++ iface=$func_arith_result ++ func_arith $loop - 1 ++ loop=$func_arith_result ++ verstring="$verstring:${iface}.0" ++ done ++ ++ # Make executables depend on our current version. ++ verstring="$verstring:${current}.0" ++ ;; ++ ++ qnx) ++ major=".$current" ++ versuffix=".$current" ++ ;; ++ ++ sunos) ++ major=".$current" ++ versuffix=".$current.$revision" ++ ;; ++ ++ windows) ++ # Use '-' rather than '.', since we only want one ++ # extension on DOS 8.3 filesystems. ++ func_arith $current - $age ++ major=$func_arith_result ++ versuffix="-$major" ++ ;; ++ ++ *) ++ func_fatal_configuration "unknown library version type \`$version_type'" ++ ;; ++ esac ++ ++ # Clear the version info if we defaulted, and they specified a release. ++ if test -z "$vinfo" && test -n "$release"; then ++ major= ++ case $version_type in ++ darwin) ++ # we can't check for "0.0" in archive_cmds due to quoting ++ # problems, so we reset it completely ++ verstring= ++ ;; ++ *) ++ verstring="0.0" ++ ;; ++ esac ++ if test "$need_version" = no; then ++ versuffix= ++ else ++ versuffix=".0.0" ++ fi ++ fi ++ ++ # Remove version info from name if versioning should be avoided ++ if test "$avoid_version" = yes && test "$need_version" = no; then ++ major= ++ versuffix= ++ verstring="" ++ fi ++ ++ # Check to see if the archive will have undefined symbols. ++ if test "$allow_undefined" = yes; then ++ if test "$allow_undefined_flag" = unsupported; then ++ func_warning "undefined symbols not allowed in $host shared libraries" ++ build_libtool_libs=no ++ build_old_libs=yes ++ fi ++ else ++ # Don't allow undefined symbols. ++ allow_undefined_flag="$no_undefined_flag" ++ fi ++ ++ fi ++ ++ func_generate_dlsyms "$libname" "$libname" "yes" ++ libobjs="$libobjs $symfileobj" ++ test "X$libobjs" = "X " && libobjs= ++ ++ if test "$mode" != relink; then ++ # Remove our outputs, but don't remove object files since they ++ # may have been created when compiling PIC objects. ++ removelist= ++ tempremovelist=`$ECHO "$output_objdir/*"` ++ for p in $tempremovelist; do ++ case $p in ++ *.$objext) ++ ;; ++ $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*) ++ if test "X$precious_files_regex" != "X"; then ++ if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1 ++ then ++ continue ++ fi ++ fi ++ removelist="$removelist $p" ++ ;; ++ *) ;; ++ esac ++ done ++ test -n "$removelist" && \ ++ func_show_eval "${RM}r \$removelist" ++ fi ++ ++ # Now set the variables for building old libraries. ++ if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then ++ oldlibs="$oldlibs $output_objdir/$libname.$libext" ++ ++ # Transform .lo files to .o files. ++ oldobjs="$objs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP` ++ fi ++ ++ # Eliminate all temporary directories. ++ #for path in $notinst_path; do ++ # lib_search_path=`$ECHO "X$lib_search_path " | $Xsed -e "s% $path % %g"` ++ # deplibs=`$ECHO "X$deplibs " | $Xsed -e "s% -L$path % %g"` ++ # dependency_libs=`$ECHO "X$dependency_libs " | $Xsed -e "s% -L$path % %g"` ++ #done ++ ++ if test -n "$xrpath"; then ++ # If the user specified any rpath flags, then add them. ++ temp_xrpath= ++ for libdir in $xrpath; do ++ temp_xrpath="$temp_xrpath -R$libdir" ++ case "$finalize_rpath " in ++ *" $libdir "*) ;; ++ *) finalize_rpath="$finalize_rpath $libdir" ;; ++ esac ++ done ++ if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then ++ dependency_libs="$temp_xrpath $dependency_libs" ++ fi ++ fi ++ ++ # Make sure dlfiles contains only unique files that won't be dlpreopened ++ old_dlfiles="$dlfiles" ++ dlfiles= ++ for lib in $old_dlfiles; do ++ case " $dlprefiles $dlfiles " in ++ *" $lib "*) ;; ++ *) dlfiles="$dlfiles $lib" ;; ++ esac ++ done ++ ++ # Make sure dlprefiles contains only unique files ++ old_dlprefiles="$dlprefiles" ++ dlprefiles= ++ for lib in $old_dlprefiles; do ++ case "$dlprefiles " in ++ *" $lib "*) ;; ++ *) dlprefiles="$dlprefiles $lib" ;; ++ esac ++ done ++ ++ if test "$build_libtool_libs" = yes; then ++ if test -n "$rpath"; then ++ case $host in ++ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*) ++ # these systems don't actually have a c library (as such)! ++ ;; ++ *-*-rhapsody* | *-*-darwin1.[012]) ++ # Rhapsody C library is in the System framework ++ deplibs="$deplibs System.ltframework" ++ ;; ++ *-*-netbsd*) ++ # Don't link with libc until the a.out ld.so is fixed. ++ ;; ++ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) ++ # Do not include libc due to us having libc/libc_r. ++ ;; ++ *-*-sco3.2v5* | *-*-sco5v6*) ++ # Causes problems with __ctype ++ ;; ++ *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) ++ # Compiler inserts libc in the correct place for threads to work ++ ;; ++ *) ++ # Add libc to deplibs on all other systems if necessary. ++ if test "$build_libtool_need_lc" = "yes"; then ++ deplibs="$deplibs -lc" ++ fi ++ ;; ++ esac ++ fi ++ ++ # Transform deplibs into only deplibs that can be linked in shared. ++ name_save=$name ++ libname_save=$libname ++ release_save=$release ++ versuffix_save=$versuffix ++ major_save=$major ++ # I'm not sure if I'm treating the release correctly. I think ++ # release should show up in the -l (ie -lgmp5) so we don't want to ++ # add it in twice. Is that correct? ++ release="" ++ versuffix="" ++ major="" ++ newdeplibs= ++ droppeddeps=no ++ case $deplibs_check_method in ++ pass_all) ++ # Don't check for shared/static. Everything works. ++ # This might be a little naive. We might want to check ++ # whether the library exists or not. But this is on ++ # osf3 & osf4 and I'm not really sure... Just ++ # implementing what was already the behavior. ++ newdeplibs=$deplibs ++ ;; ++ test_compile) ++ # This code stresses the "libraries are programs" paradigm to its ++ # limits. Maybe even breaks it. We compile a program, linking it ++ # against the deplibs as a proxy for the library. Then we can check ++ # whether they linked in statically or dynamically with ldd. ++ $opt_dry_run || $RM conftest.c ++ cat > conftest.c </dev/null` ++ for potent_lib in $potential_libs; do ++ # Follow soft links. ++ if ls -lLd "$potent_lib" 2>/dev/null | ++ $GREP " -> " >/dev/null; then ++ continue ++ fi ++ # The statement above tries to avoid entering an ++ # endless loop below, in case of cyclic links. ++ # We might still enter an endless loop, since a link ++ # loop can be closed while we follow links, ++ # but so what? ++ potlib="$potent_lib" ++ while test -h "$potlib" 2>/dev/null; do ++ potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'` ++ case $potliblink in ++ [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";; ++ *) potlib=`$ECHO "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";; ++ esac ++ done ++ if eval $file_magic_cmd \"\$potlib\" 2>/dev/null | ++ $SED -e 10q | ++ $EGREP "$file_magic_regex" > /dev/null; then ++ newdeplibs="$newdeplibs $a_deplib" ++ a_deplib="" ++ break 2 ++ fi ++ done ++ done ++ fi ++ if test -n "$a_deplib" ; then ++ droppeddeps=yes ++ $ECHO ++ $ECHO "*** Warning: linker path does not have real file for library $a_deplib." ++ $ECHO "*** I have the capability to make that library automatically link in when" ++ $ECHO "*** you link to this library. But I can only do this if you have a" ++ $ECHO "*** shared version of the library, which you do not appear to have" ++ $ECHO "*** because I did check the linker path looking for a file starting" ++ if test -z "$potlib" ; then ++ $ECHO "*** with $libname but no candidates were found. (...for file magic test)" ++ else ++ $ECHO "*** with $libname and none of the candidates passed a file format test" ++ $ECHO "*** using a file magic. Last file checked: $potlib" ++ fi ++ fi ++ ;; ++ *) ++ # Add a -L argument. ++ newdeplibs="$newdeplibs $a_deplib" ++ ;; ++ esac ++ done # Gone through all deplibs. ++ ;; ++ match_pattern*) ++ set dummy $deplibs_check_method; shift ++ match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` ++ for a_deplib in $deplibs; do ++ case $a_deplib in ++ -l*) ++ func_stripname -l '' "$a_deplib" ++ name=$func_stripname_result ++ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then ++ case " $predeps $postdeps " in ++ *" $a_deplib "*) ++ newdeplibs="$newdeplibs $a_deplib" ++ a_deplib="" ++ ;; ++ esac ++ fi ++ if test -n "$a_deplib" ; then ++ libname=`eval "\\$ECHO \"$libname_spec\""` ++ for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do ++ potential_libs=`ls $i/$libname[.-]* 2>/dev/null` ++ for potent_lib in $potential_libs; do ++ potlib="$potent_lib" # see symlink-check above in file_magic test ++ if eval "\$ECHO \"X$potent_lib\"" 2>/dev/null | $Xsed -e 10q | \ ++ $EGREP "$match_pattern_regex" > /dev/null; then ++ newdeplibs="$newdeplibs $a_deplib" ++ a_deplib="" ++ break 2 ++ fi ++ done ++ done ++ fi ++ if test -n "$a_deplib" ; then ++ droppeddeps=yes ++ $ECHO ++ $ECHO "*** Warning: linker path does not have real file for library $a_deplib." ++ $ECHO "*** I have the capability to make that library automatically link in when" ++ $ECHO "*** you link to this library. But I can only do this if you have a" ++ $ECHO "*** shared version of the library, which you do not appear to have" ++ $ECHO "*** because I did check the linker path looking for a file starting" ++ if test -z "$potlib" ; then ++ $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)" ++ else ++ $ECHO "*** with $libname and none of the candidates passed a file format test" ++ $ECHO "*** using a regex pattern. Last file checked: $potlib" ++ fi ++ fi ++ ;; ++ *) ++ # Add a -L argument. ++ newdeplibs="$newdeplibs $a_deplib" ++ ;; ++ esac ++ done # Gone through all deplibs. ++ ;; ++ none | unknown | *) ++ newdeplibs="" ++ tmp_deplibs=`$ECHO "X $deplibs" | $Xsed \ ++ -e 's/ -lc$//' -e 's/ -[LR][^ ]*//g'` ++ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then ++ for i in $predeps $postdeps ; do ++ # can't use Xsed below, because $i might contain '/' ++ tmp_deplibs=`$ECHO "X $tmp_deplibs" | $Xsed -e "s,$i,,"` ++ done ++ fi ++ if $ECHO "X $tmp_deplibs" | $Xsed -e 's/[ ]//g' | ++ $GREP . >/dev/null; then ++ $ECHO ++ if test "X$deplibs_check_method" = "Xnone"; then ++ $ECHO "*** Warning: inter-library dependencies are not supported in this platform." ++ else ++ $ECHO "*** Warning: inter-library dependencies are not known to be supported." ++ fi ++ $ECHO "*** All declared inter-library dependencies are being dropped." ++ droppeddeps=yes ++ fi ++ ;; ++ esac ++ versuffix=$versuffix_save ++ major=$major_save ++ release=$release_save ++ libname=$libname_save ++ name=$name_save ++ ++ case $host in ++ *-*-rhapsody* | *-*-darwin1.[012]) ++ # On Rhapsody replace the C library with the System framework ++ newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's/ -lc / System.ltframework /'` ++ ;; ++ esac ++ ++ if test "$droppeddeps" = yes; then ++ if test "$module" = yes; then ++ $ECHO ++ $ECHO "*** Warning: libtool could not satisfy all declared inter-library" ++ $ECHO "*** dependencies of module $libname. Therefore, libtool will create" ++ $ECHO "*** a static module, that should work as long as the dlopening" ++ $ECHO "*** application is linked with the -dlopen flag." ++ if test -z "$global_symbol_pipe"; then ++ $ECHO ++ $ECHO "*** However, this would only work if libtool was able to extract symbol" ++ $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could" ++ $ECHO "*** not find such a program. So, this module is probably useless." ++ $ECHO "*** \`nm' from GNU binutils and a full rebuild may help." ++ fi ++ if test "$build_old_libs" = no; then ++ oldlibs="$output_objdir/$libname.$libext" ++ build_libtool_libs=module ++ build_old_libs=yes ++ else ++ build_libtool_libs=no ++ fi ++ else ++ $ECHO "*** The inter-library dependencies that have been dropped here will be" ++ $ECHO "*** automatically added whenever a program is linked with this library" ++ $ECHO "*** or is declared to -dlopen it." ++ ++ if test "$allow_undefined" = no; then ++ $ECHO ++ $ECHO "*** Since this library must not contain undefined symbols," ++ $ECHO "*** because either the platform does not support them or" ++ $ECHO "*** it was explicitly requested with -no-undefined," ++ $ECHO "*** libtool will only create a static version of it." ++ if test "$build_old_libs" = no; then ++ oldlibs="$output_objdir/$libname.$libext" ++ build_libtool_libs=module ++ build_old_libs=yes ++ else ++ build_libtool_libs=no ++ fi ++ fi ++ fi ++ fi ++ # Done checking deplibs! ++ deplibs=$newdeplibs ++ fi ++ # Time to change all our "foo.ltframework" stuff back to "-framework foo" ++ case $host in ++ *-*-darwin*) ++ newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` ++ new_inherited_linker_flags=`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` ++ deplibs=`$ECHO "X $deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` ++ ;; ++ esac ++ ++ # move library search paths that coincide with paths to not yet ++ # installed libraries to the beginning of the library search list ++ new_libs= ++ for path in $notinst_path; do ++ case " $new_libs " in ++ *" -L$path/$objdir "*) ;; ++ *) ++ case " $deplibs " in ++ *" -L$path/$objdir "*) ++ new_libs="$new_libs -L$path/$objdir" ;; ++ esac ++ ;; ++ esac ++ done ++ for deplib in $deplibs; do ++ case $deplib in ++ -L*) ++ case " $new_libs " in ++ *" $deplib "*) ;; ++ *) new_libs="$new_libs $deplib" ;; ++ esac ++ ;; ++ *) new_libs="$new_libs $deplib" ;; ++ esac ++ done ++ deplibs="$new_libs" + +- $echo >> $output "\ ++ # All the library-specific variables (install_libdir is set above). ++ library_names= ++ old_library= ++ dlname= + +- if test -f \"\$progdir/\$program\"; then" ++ # Test again, we may have decided not to build it any more ++ if test "$build_libtool_libs" = yes; then ++ if test "$hardcode_into_libs" = yes; then ++ # Hardcode the library paths ++ hardcode_libdirs= ++ dep_rpath= ++ rpath="$finalize_rpath" ++ test "$mode" != relink && rpath="$compile_rpath$rpath" ++ for libdir in $rpath; do ++ if test -n "$hardcode_libdir_flag_spec"; then ++ if test -n "$hardcode_libdir_separator"; then ++ if test -z "$hardcode_libdirs"; then ++ hardcode_libdirs="$libdir" ++ else ++ # Just accumulate the unique libdirs. ++ case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in ++ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) ++ ;; ++ *) ++ hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" ++ ;; ++ esac ++ fi ++ else ++ eval flag=\"$hardcode_libdir_flag_spec\" ++ dep_rpath="$dep_rpath $flag" ++ fi ++ elif test -n "$runpath_var"; then ++ case "$perm_rpath " in ++ *" $libdir "*) ;; ++ *) perm_rpath="$perm_rpath $libdir" ;; ++ esac ++ fi ++ done ++ # Substitute the hardcoded libdirs into the rpath. ++ if test -n "$hardcode_libdir_separator" && ++ test -n "$hardcode_libdirs"; then ++ libdir="$hardcode_libdirs" ++ if test -n "$hardcode_libdir_flag_spec_ld"; then ++ eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\" ++ else ++ eval dep_rpath=\"$hardcode_libdir_flag_spec\" ++ fi ++ fi ++ if test -n "$runpath_var" && test -n "$perm_rpath"; then ++ # We should set the runpath_var. ++ rpath= ++ for dir in $perm_rpath; do ++ rpath="$rpath$dir:" ++ done ++ eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var" ++ fi ++ test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs" ++ fi + +- # Export our shlibpath_var if we have one. +- if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then +- $echo >> $output "\ +- # Add our own library path to $shlibpath_var +- $shlibpath_var=\"$temp_rpath\$$shlibpath_var\" ++ shlibpath="$finalize_shlibpath" ++ test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath" ++ if test -n "$shlibpath"; then ++ eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var" ++ fi + +- # Some systems cannot cope with colon-terminated $shlibpath_var +- # The second colon is a workaround for a bug in BeOS R4 sed +- $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\` ++ # Get the real and link names of the library. ++ eval shared_ext=\"$shrext_cmds\" ++ eval library_names=\"$library_names_spec\" ++ set dummy $library_names ++ shift ++ realname="$1" ++ shift + +- export $shlibpath_var +-" ++ if test -n "$soname_spec"; then ++ eval soname=\"$soname_spec\" ++ else ++ soname="$realname" + fi +- +- # fixup the dll searchpath if we need to. +- if test -n "$dllsearchpath"; then +- $echo >> $output "\ +- # Add the dll search path components to the executable PATH +- PATH=$dllsearchpath:\$PATH +-" ++ if test -z "$dlname"; then ++ dlname=$soname + fi + +- $echo >> $output "\ +- if test \"\$libtool_execute_magic\" != \"$magic\"; then +- # Run the actual program with our arguments. +-" +- case $host in +- # Backslashes separate directories on plain windows +- *-*-mingw | *-*-os2*) +- $echo >> $output "\ +- exec \"\$progdir\\\\\$program\" \${1+\"\$@\"} +-" +- ;; ++ lib="$output_objdir/$realname" ++ linknames= ++ for link ++ do ++ linknames="$linknames $link" ++ done + +- *) +- $echo >> $output "\ +- exec \"\$progdir/\$program\" \${1+\"\$@\"} +-" ++ # Use standard objects if they are pic ++ test -z "$pic_flag" && libobjs=`$ECHO "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` ++ test "X$libobjs" = "X " && libobjs= ++ ++ delfiles= ++ if test -n "$export_symbols" && test -n "$include_expsyms"; then ++ $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp" ++ export_symbols="$output_objdir/$libname.uexp" ++ delfiles="$delfiles $export_symbols" ++ fi ++ ++ orig_export_symbols= ++ case $host_os in ++ cygwin* | mingw*) ++ if test -n "$export_symbols" && test -z "$export_symbols_regex"; then ++ # exporting using user supplied symfile ++ if test "x`$SED 1q $export_symbols`" != xEXPORTS; then ++ # and it's NOT already a .def file. Must figure out ++ # which of the given symbols are data symbols and tag ++ # them as such. So, trigger use of export_symbols_cmds. ++ # export_symbols gets reassigned inside the "prepare ++ # the list of exported symbols" if statement, so the ++ # include_expsyms logic still works. ++ orig_export_symbols="$export_symbols" ++ export_symbols= ++ always_export_symbols=yes ++ fi ++ fi + ;; + esac +- $echo >> $output "\ +- \$echo \"\$0: cannot exec \$program \$*\" +- exit $EXIT_FAILURE +- fi +- else +- # The program doesn't exist. +- \$echo \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2 +- \$echo \"This script is just a wrapper for \$program.\" 1>&2 +- $echo \"See the $PACKAGE documentation for more information.\" 1>&2 +- exit $EXIT_FAILURE +- fi +-fi\ +-" +- chmod +x $output +- fi +- exit $EXIT_SUCCESS +- ;; +- esac +- +- # See if we need to build an old-fashioned archive. +- for oldlib in $oldlibs; do + +- if test "$build_libtool_libs" = convenience; then +- oldobjs="$libobjs_save" +- addlibs="$convenience" +- build_libtool_libs=no +- else +- if test "$build_libtool_libs" = module; then +- oldobjs="$libobjs_save" +- build_libtool_libs=no +- else +- oldobjs="$old_deplibs $non_pic_objects" ++ # Prepare the list of exported symbols ++ if test -z "$export_symbols"; then ++ if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then ++ func_verbose "generating symbol list for \`$libname.la'" ++ export_symbols="$output_objdir/$libname.exp" ++ $opt_dry_run || $RM $export_symbols ++ cmds=$export_symbols_cmds ++ save_ifs="$IFS"; IFS='~' ++ for cmd in $cmds; do ++ IFS="$save_ifs" ++ eval cmd=\"$cmd\" ++ func_len " $cmd" ++ len=$func_len_result ++ if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then ++ func_show_eval "$cmd" 'exit $?' ++ skipped_export=false ++ else ++ # The command line is too long to execute in one step. ++ func_verbose "using reloadable object file for export list..." ++ skipped_export=: ++ # Break out early, otherwise skipped_export may be ++ # set to false by a later but shorter cmd. ++ break ++ fi ++ done ++ IFS="$save_ifs" ++ if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then ++ func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' ++ func_show_eval '$MV "${export_symbols}T" "$export_symbols"' ++ fi ++ fi + fi +- addlibs="$old_convenience" +- fi +- +- if test -n "$addlibs"; then +- gentop="$output_objdir/${outputname}x" +- generated="$generated $gentop" + +- func_extract_archives $gentop $addlibs +- oldobjs="$oldobjs $func_extract_archives_result" +- fi ++ if test -n "$export_symbols" && test -n "$include_expsyms"; then ++ tmp_export_symbols="$export_symbols" ++ test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" ++ $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"' ++ fi ++ ++ if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then ++ # The given exports_symbols file has to be filtered, so filter it. ++ func_verbose "filter symbol list for \`$libname.la' to tag DATA exports" ++ # FIXME: $output_objdir/$libname.filter potentially contains lots of ++ # 's' commands which not all seds can handle. GNU sed should be fine ++ # though. Also, the filter scales superlinearly with the number of ++ # global variables. join(1) would be nice here, but unfortunately ++ # isn't a blessed tool. ++ $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter ++ delfiles="$delfiles $export_symbols $output_objdir/$libname.filter" ++ export_symbols=$output_objdir/$libname.def ++ $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols ++ fi + +- # Do each command in the archive commands. +- if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then +- cmds=$old_archive_from_new_cmds +- else +- # POSIX demands no paths to be encoded in archives. We have +- # to avoid creating archives with duplicate basenames if we +- # might have to extract them afterwards, e.g., when creating a +- # static archive out of a convenience library, or when linking +- # the entirety of a libtool archive into another (currently +- # not supported by libtool). +- if (for obj in $oldobjs +- do +- $echo "X$obj" | $Xsed -e 's%^.*/%%' +- done | sort | sort -uc >/dev/null 2>&1); then +- : +- else +- $echo "copying selected object files to avoid basename conflicts..." ++ tmp_deplibs= ++ for test_deplib in $deplibs; do ++ case " $convenience " in ++ *" $test_deplib "*) ;; ++ *) ++ tmp_deplibs="$tmp_deplibs $test_deplib" ++ ;; ++ esac ++ done ++ deplibs="$tmp_deplibs" + +- if test -z "$gentop"; then ++ if test -n "$convenience"; then ++ if test -n "$whole_archive_flag_spec" && ++ test "$compiler_needs_object" = yes && ++ test -z "$libobjs"; then ++ # extract the archives, so we have objects to list. ++ # TODO: could optimize this to just extract one archive. ++ whole_archive_flag_spec= ++ fi ++ if test -n "$whole_archive_flag_spec"; then ++ save_libobjs=$libobjs ++ eval libobjs=\"\$libobjs $whole_archive_flag_spec\" ++ test "X$libobjs" = "X " && libobjs= ++ else + gentop="$output_objdir/${outputname}x" + generated="$generated $gentop" + +- $show "${rm}r $gentop" +- $run ${rm}r "$gentop" +- $show "$mkdir $gentop" +- $run $mkdir "$gentop" +- exit_status=$? +- if test "$exit_status" -ne 0 && test ! -d "$gentop"; then +- exit $exit_status +- fi ++ func_extract_archives $gentop $convenience ++ libobjs="$libobjs $func_extract_archives_result" ++ test "X$libobjs" = "X " && libobjs= + fi +- +- save_oldobjs=$oldobjs +- oldobjs= +- counter=1 +- for obj in $save_oldobjs +- do +- objbase=`$echo "X$obj" | $Xsed -e 's%^.*/%%'` +- case " $oldobjs " in +- " ") oldobjs=$obj ;; +- *[\ /]"$objbase "*) +- while :; do +- # Make sure we don't pick an alternate name that also +- # overlaps. +- newobj=lt$counter-$objbase +- counter=`expr $counter + 1` +- case " $oldobjs " in +- *[\ /]"$newobj "*) ;; +- *) if test ! -f "$gentop/$newobj"; then break; fi ;; +- esac +- done +- $show "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj" +- $run ln "$obj" "$gentop/$newobj" || +- $run cp "$obj" "$gentop/$newobj" +- oldobjs="$oldobjs $gentop/$newobj" +- ;; +- *) oldobjs="$oldobjs $obj" ;; +- esac +- done + fi + +- eval cmds=\"$old_archive_cmds\" ++ if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then ++ eval flag=\"$thread_safe_flag_spec\" ++ linker_flags="$linker_flags $flag" ++ fi + +- if len=`expr "X$cmds" : ".*"` && +- test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then +- cmds=$old_archive_cmds +- else +- # the command line is too long to link in one step, link in parts +- $echo "using piecewise archive linking..." +- save_RANLIB=$RANLIB +- RANLIB=: +- objlist= +- concat_cmds= +- save_oldobjs=$oldobjs ++ # Make a backup of the uninstalled library when relinking ++ if test "$mode" = relink; then ++ $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $? ++ fi + +- # Is there a better way of finding the last object in the list? +- for obj in $save_oldobjs +- do +- last_oldobj=$obj +- done +- for obj in $save_oldobjs +- do +- oldobjs="$objlist $obj" +- objlist="$objlist $obj" +- eval test_cmds=\"$old_archive_cmds\" +- if len=`expr "X$test_cmds" : ".*" 2>/dev/null` && +- test "$len" -le "$max_cmd_len"; then +- : +- else +- # the above command should be used before it gets too long +- oldobjs=$objlist +- if test "$obj" = "$last_oldobj" ; then +- RANLIB=$save_RANLIB +- fi +- test -z "$concat_cmds" || concat_cmds=$concat_cmds~ +- eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\" +- objlist= +- fi +- done +- RANLIB=$save_RANLIB +- oldobjs=$objlist +- if test "X$oldobjs" = "X" ; then +- eval cmds=\"\$concat_cmds\" ++ # Do each of the archive commands. ++ if test "$module" = yes && test -n "$module_cmds" ; then ++ if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then ++ eval test_cmds=\"$module_expsym_cmds\" ++ cmds=$module_expsym_cmds + else +- eval cmds=\"\$concat_cmds~\$old_archive_cmds\" ++ eval test_cmds=\"$module_cmds\" ++ cmds=$module_cmds ++ fi ++ else ++ if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then ++ eval test_cmds=\"$archive_expsym_cmds\" ++ cmds=$archive_expsym_cmds ++ else ++ eval test_cmds=\"$archive_cmds\" ++ cmds=$archive_cmds + fi + fi +- fi +- save_ifs="$IFS"; IFS='~' +- for cmd in $cmds; do +- eval cmd=\"$cmd\" +- IFS="$save_ifs" +- $show "$cmd" +- $run eval "$cmd" || exit $? +- done +- IFS="$save_ifs" +- done +- +- if test -n "$generated"; then +- $show "${rm}r$generated" +- $run ${rm}r$generated +- fi +- +- # Now create the libtool archive. +- case $output in +- *.la) +- old_library= +- test "$build_old_libs" = yes && old_library="$libname.$libext" +- $show "creating $output" + +- # Preserve any variables that may affect compiler behavior +- for var in $variables_saved_for_relink; do +- if eval test -z \"\${$var+set}\"; then +- relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command" +- elif eval var_value=\$$var; test -z "$var_value"; then +- relink_command="$var=; export $var; $relink_command" ++ if test "X$skipped_export" != "X:" && ++ func_len " $test_cmds" && ++ len=$func_len_result && ++ test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then ++ : + else +- var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"` +- relink_command="$var=\"$var_value\"; export $var; $relink_command" +- fi +- done +- # Quote the link command for shipping. +- relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)" +- relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e "$sed_quote_subst" | $NL2SP` +- if test "$hardcode_automatic" = yes ; then +- relink_command= +- fi ++ # The command line is too long to link in one step, link piecewise ++ # or, if using GNU ld and skipped_export is not :, use a linker ++ # script. ++ ++ # Save the value of $output and $libobjs because we want to ++ # use them later. If we have whole_archive_flag_spec, we ++ # want to use save_libobjs as it was before ++ # whole_archive_flag_spec was expanded, because we can't ++ # assume the linker understands whole_archive_flag_spec. ++ # This may have to be revisited, in case too many ++ # convenience libraries get linked in and end up exceeding ++ # the spec. ++ if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then ++ save_libobjs=$libobjs ++ fi ++ save_output=$output ++ output_la=`$ECHO "X$output" | $Xsed -e "$basename"` + ++ # Clear the reloadable object creation command queue and ++ # initialize k to one. ++ test_cmds= ++ concat_cmds= ++ objlist= ++ last_robj= ++ k=1 + +- # Only create the output if not a dry run. +- if test -z "$run"; then +- for installed in no yes; do +- if test "$installed" = yes; then +- if test -z "$install_libdir"; then +- break ++ if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then ++ output=${output_objdir}/${output_la}.lnkscript ++ func_verbose "creating GNU ld script: $output" ++ $ECHO 'INPUT (' > $output ++ for obj in $save_libobjs ++ do ++ $ECHO "$obj" >> $output ++ done ++ $ECHO ')' >> $output ++ delfiles="$delfiles $output" ++ elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then ++ output=${output_objdir}/${output_la}.lnk ++ func_verbose "creating linker input file list: $output" ++ : > $output ++ set x $save_libobjs ++ shift ++ firstobj= ++ if test "$compiler_needs_object" = yes; then ++ firstobj="$1 " ++ shift + fi +- output="$output_objdir/$outputname"i +- # Replace all uninstalled libtool libraries with the installed ones +- newdependency_libs= +- for deplib in $dependency_libs; do +- case $deplib in +- *.la) +- name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'` +- eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` +- if test -z "$libdir"; then +- $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2 +- exit $EXIT_FAILURE +- fi +- newdependency_libs="$newdependency_libs $libdir/$name" +- ;; +- *) newdependency_libs="$newdependency_libs $deplib" ;; +- esac ++ for obj ++ do ++ $ECHO "$obj" >> $output + done +- dependency_libs="$newdependency_libs" +- newdlfiles= +- for lib in $dlfiles; do +- name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` +- eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` +- if test -z "$libdir"; then +- $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 +- exit $EXIT_FAILURE ++ delfiles="$delfiles $output" ++ output=$firstobj\"$file_list_spec$output\" ++ else ++ if test -n "$save_libobjs"; then ++ func_verbose "creating reloadable object files..." ++ output=$output_objdir/$output_la-${k}.$objext ++ eval test_cmds=\"$reload_cmds\" ++ func_len " $test_cmds" ++ len0=$func_len_result ++ len=$len0 ++ ++ # Loop over the list of objects to be linked. ++ for obj in $save_libobjs ++ do ++ func_len " $obj" ++ func_arith $len + $func_len_result ++ len=$func_arith_result ++ if test "X$objlist" = X || ++ test "$len" -lt "$max_cmd_len"; then ++ func_append objlist " $obj" ++ else ++ # The command $test_cmds is almost too long, add a ++ # command to the queue. ++ if test "$k" -eq 1 ; then ++ # The first file doesn't have a previous command to add. ++ eval concat_cmds=\"$reload_cmds $objlist $last_robj\" ++ else ++ # All subsequent reloadable object files will link in ++ # the last one created. ++ eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj~\$RM $last_robj\" ++ fi ++ last_robj=$output_objdir/$output_la-${k}.$objext ++ func_arith $k + 1 ++ k=$func_arith_result ++ output=$output_objdir/$output_la-${k}.$objext ++ objlist=$obj ++ func_len " $last_robj" ++ func_arith $len0 + $func_len_result ++ len=$func_arith_result ++ fi ++ done ++ # Handle the remaining objects by creating one last ++ # reloadable object file. All subsequent reloadable object ++ # files will link in the last one created. ++ test -z "$concat_cmds" || concat_cmds=$concat_cmds~ ++ eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\" ++ if test -n "$last_robj"; then ++ eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\" + fi +- newdlfiles="$newdlfiles $libdir/$name" +- done +- dlfiles="$newdlfiles" +- newdlprefiles= +- for lib in $dlprefiles; do +- name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` +- eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` +- if test -z "$libdir"; then +- $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 +- exit $EXIT_FAILURE ++ delfiles="$delfiles $output" ++ ++ else ++ output= ++ fi ++ ++ if ${skipped_export-false}; then ++ func_verbose "generating symbol list for \`$libname.la'" ++ export_symbols="$output_objdir/$libname.exp" ++ $opt_dry_run || $RM $export_symbols ++ libobjs=$output ++ # Append the command to create the export file. ++ test -z "$concat_cmds" || concat_cmds=$concat_cmds~ ++ eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\" ++ if test -n "$last_robj"; then ++ eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\" + fi +- newdlprefiles="$newdlprefiles $libdir/$name" +- done +- dlprefiles="$newdlprefiles" +- else +- newdlfiles= +- for lib in $dlfiles; do +- case $lib in +- [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; +- *) abs=`pwd`"/$lib" ;; +- esac +- newdlfiles="$newdlfiles $abs" +- done +- dlfiles="$newdlfiles" +- newdlprefiles= +- for lib in $dlprefiles; do +- case $lib in +- [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; +- *) abs=`pwd`"/$lib" ;; +- esac +- newdlprefiles="$newdlprefiles $abs" ++ fi ++ ++ test -n "$save_libobjs" && ++ func_verbose "creating a temporary reloadable object file: $output" ++ ++ # Loop through the commands generated above and execute them. ++ save_ifs="$IFS"; IFS='~' ++ for cmd in $concat_cmds; do ++ IFS="$save_ifs" ++ $opt_silent || { ++ func_quote_for_expand "$cmd" ++ eval "func_echo $func_quote_for_expand_result" ++ } ++ $opt_dry_run || eval "$cmd" || { ++ lt_exit=$? ++ ++ # Restore the uninstalled library and exit ++ if test "$mode" = relink; then ++ ( cd "$output_objdir" && \ ++ $RM "${realname}T" && \ ++ $MV "${realname}U" "$realname" ) ++ fi ++ ++ exit $lt_exit ++ } + done +- dlprefiles="$newdlprefiles" ++ IFS="$save_ifs" ++ ++ if test -n "$export_symbols_regex" && ${skipped_export-false}; then ++ func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' ++ func_show_eval '$MV "${export_symbols}T" "$export_symbols"' ++ fi + fi +- $rm $output +- # place dlname in correct position for cygwin +- tdlname=$dlname +- case $host,$output,$installed,$module,$dlname in +- *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;; +- esac +- $echo > $output "\ +-# $outputname - a libtool library file +-# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP +-# +-# Please DO NOT delete this file! +-# It is necessary for linking the library. + +-# The name that we can dlopen(3). +-dlname='$tdlname' ++ if ${skipped_export-false}; then ++ if test -n "$export_symbols" && test -n "$include_expsyms"; then ++ tmp_export_symbols="$export_symbols" ++ test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" ++ $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"' ++ fi ++ ++ if test -n "$orig_export_symbols"; then ++ # The given exports_symbols file has to be filtered, so filter it. ++ func_verbose "filter symbol list for \`$libname.la' to tag DATA exports" ++ # FIXME: $output_objdir/$libname.filter potentially contains lots of ++ # 's' commands which not all seds can handle. GNU sed should be fine ++ # though. Also, the filter scales superlinearly with the number of ++ # global variables. join(1) would be nice here, but unfortunately ++ # isn't a blessed tool. ++ $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter ++ delfiles="$delfiles $export_symbols $output_objdir/$libname.filter" ++ export_symbols=$output_objdir/$libname.def ++ $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols ++ fi ++ fi + +-# Names of this library. +-library_names='$library_names' ++ libobjs=$output ++ # Restore the value of output. ++ output=$save_output + +-# The name of the static archive. +-old_library='$old_library' ++ if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then ++ eval libobjs=\"\$libobjs $whole_archive_flag_spec\" ++ test "X$libobjs" = "X " && libobjs= ++ fi ++ # Expand the library linking commands again to reset the ++ # value of $libobjs for piecewise linking. + +-# Libraries that this one depends upon. +-dependency_libs='$dependency_libs' ++ # Do each of the archive commands. ++ if test "$module" = yes && test -n "$module_cmds" ; then ++ if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then ++ cmds=$module_expsym_cmds ++ else ++ cmds=$module_cmds ++ fi ++ else ++ if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then ++ cmds=$archive_expsym_cmds ++ else ++ cmds=$archive_cmds ++ fi ++ fi ++ fi + +-# Version information for $libname. +-current=$current +-age=$age +-revision=$revision ++ if test -n "$delfiles"; then ++ # Append the command to remove temporary files to $cmds. ++ eval cmds=\"\$cmds~\$RM $delfiles\" ++ fi + +-# Is this an already installed library? +-installed=$installed ++ # Add any objects from preloaded convenience libraries ++ if test -n "$dlprefiles"; then ++ gentop="$output_objdir/${outputname}x" ++ generated="$generated $gentop" + +-# Should we warn about portability when linking against -modules? +-shouldnotlink=$module ++ func_extract_archives $gentop $dlprefiles ++ libobjs="$libobjs $func_extract_archives_result" ++ test "X$libobjs" = "X " && libobjs= ++ fi + +-# Files to dlopen/dlpreopen +-dlopen='$dlfiles' +-dlpreopen='$dlprefiles' ++ save_ifs="$IFS"; IFS='~' ++ for cmd in $cmds; do ++ IFS="$save_ifs" ++ eval cmd=\"$cmd\" ++ $opt_silent || { ++ func_quote_for_expand "$cmd" ++ eval "func_echo $func_quote_for_expand_result" ++ } ++ $opt_dry_run || eval "$cmd" || { ++ lt_exit=$? + +-# Directory that this library needs to be installed in: +-libdir='$install_libdir'" +- if test "$installed" = no && test "$need_relink" = yes; then +- $echo >> $output "\ +-relink_command=\"$relink_command\"" +- fi ++ # Restore the uninstalled library and exit ++ if test "$mode" = relink; then ++ ( cd "$output_objdir" && \ ++ $RM "${realname}T" && \ ++ $MV "${realname}U" "$realname" ) ++ fi ++ ++ exit $lt_exit ++ } + done +- fi ++ IFS="$save_ifs" + +- # Do a symbolic link so that the libtool archive can be found in +- # LD_LIBRARY_PATH before the program is installed. +- $show "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)" +- $run eval '(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)' || exit $? +- ;; +- esac +- exit $EXIT_SUCCESS +- ;; ++ # Restore the uninstalled library and exit ++ if test "$mode" = relink; then ++ $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $? + +- # libtool install mode +- install) +- modename="$modename: install" ++ if test -n "$convenience"; then ++ if test -z "$whole_archive_flag_spec"; then ++ func_show_eval '${RM}r "$gentop"' ++ fi ++ fi + +- # There may be an optional sh(1) argument at the beginning of +- # install_prog (especially on Windows NT). +- if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh || +- # Allow the use of GNU shtool's install command. +- $echo "X$nonopt" | grep shtool > /dev/null; then +- # Aesthetically quote it. +- arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"` +- case $arg in +- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") +- arg="\"$arg\"" +- ;; +- esac +- install_prog="$arg " +- arg="$1" +- shift +- else +- install_prog= +- arg=$nonopt +- fi ++ exit $EXIT_SUCCESS ++ fi + +- # The real first argument should be the name of the installation program. +- # Aesthetically quote it. +- arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` +- case $arg in +- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") +- arg="\"$arg\"" +- ;; +- esac +- install_prog="$install_prog$arg" ++ # Create links to the real library. ++ for linkname in $linknames; do ++ if test "$realname" != "$linkname"; then ++ func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?' ++ fi ++ done + +- # We need to accept at least all the BSD install flags. +- dest= +- files= +- opts= +- prev= +- install_type= +- isdir=no +- stripme= +- for arg +- do +- if test -n "$dest"; then +- files="$files $dest" +- dest=$arg +- continue ++ # If -module or -export-dynamic was specified, set the dlname. ++ if test "$module" = yes || test "$export_dynamic" = yes; then ++ # On all known operating systems, these are identical. ++ dlname="$soname" ++ fi + fi ++ ;; + +- case $arg in +- -d) isdir=yes ;; +- -f) +- case " $install_prog " in +- *[\\\ /]cp\ *) ;; +- *) prev=$arg ;; +- esac +- ;; +- -g | -m | -o) prev=$arg ;; +- -s) +- stripme=" -s" +- continue +- ;; +- -*) ++ obj) ++ if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then ++ func_warning "\`-dlopen' is ignored for objects" ++ fi ++ ++ case " $deplibs" in ++ *\ -l* | *\ -L*) ++ func_warning "\`-l' and \`-L' are ignored for objects" ;; ++ esac ++ ++ test -n "$rpath" && \ ++ func_warning "\`-rpath' is ignored for objects" ++ ++ test -n "$xrpath" && \ ++ func_warning "\`-R' is ignored for objects" ++ ++ test -n "$vinfo" && \ ++ func_warning "\`-version-info' is ignored for objects" ++ ++ test -n "$release" && \ ++ func_warning "\`-release' is ignored for objects" ++ ++ case $output in ++ *.lo) ++ test -n "$objs$old_deplibs" && \ ++ func_fatal_error "cannot build library object \`$output' from non-libtool objects" ++ ++ libobj=$output ++ func_lo2o "$libobj" ++ obj=$func_lo2o_result + ;; + *) +- # If the previous option needed an argument, then skip it. +- if test -n "$prev"; then +- prev= +- else +- dest=$arg +- continue +- fi ++ libobj= ++ obj="$output" + ;; + esac + +- # Aesthetically quote the argument. +- arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` +- case $arg in +- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") +- arg="\"$arg\"" +- ;; +- esac +- install_prog="$install_prog $arg" +- done ++ # Delete the old objects. ++ $opt_dry_run || $RM $obj $libobj + +- if test -z "$install_prog"; then +- $echo "$modename: you must specify an install program" 1>&2 +- $echo "$help" 1>&2 +- exit $EXIT_FAILURE +- fi ++ # Objects from convenience libraries. This assumes ++ # single-version convenience libraries. Whenever we create ++ # different ones for PIC/non-PIC, this we'll have to duplicate ++ # the extraction. ++ reload_conv_objs= ++ gentop= ++ # reload_cmds runs $LD directly, so let us get rid of ++ # -Wl from whole_archive_flag_spec and hope we can get by with ++ # turning comma into space.. ++ wl= + +- if test -n "$prev"; then +- $echo "$modename: the \`$prev' option requires an argument" 1>&2 +- $echo "$help" 1>&2 +- exit $EXIT_FAILURE +- fi ++ if test -n "$convenience"; then ++ if test -n "$whole_archive_flag_spec"; then ++ eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\" ++ reload_conv_objs=$reload_objs\ `$ECHO "X$tmp_whole_archive_flags" | $Xsed -e 's|,| |g'` ++ else ++ gentop="$output_objdir/${obj}x" ++ generated="$generated $gentop" + +- if test -z "$files"; then +- if test -z "$dest"; then +- $echo "$modename: no file or destination specified" 1>&2 +- else +- $echo "$modename: you must specify a destination" 1>&2 ++ func_extract_archives $gentop $convenience ++ reload_conv_objs="$reload_objs $func_extract_archives_result" ++ fi + fi +- $echo "$help" 1>&2 +- exit $EXIT_FAILURE +- fi + +- # Strip any trailing slash from the destination. +- dest=`$echo "X$dest" | $Xsed -e 's%/$%%'` ++ # Create the old-style object. ++ reload_objs="$objs$old_deplibs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test + +- # Check to see that the destination is a directory. +- test -d "$dest" && isdir=yes +- if test "$isdir" = yes; then +- destdir="$dest" +- destname= +- else +- destdir=`$echo "X$dest" | $Xsed -e 's%/[^/]*$%%'` +- test "X$destdir" = "X$dest" && destdir=. +- destname=`$echo "X$dest" | $Xsed -e 's%^.*/%%'` ++ output="$obj" ++ func_execute_cmds "$reload_cmds" 'exit $?' + +- # Not a directory, so check to see that there is only one file specified. +- set dummy $files +- if test "$#" -gt 2; then +- $echo "$modename: \`$dest' is not a directory" 1>&2 +- $echo "$help" 1>&2 +- exit $EXIT_FAILURE ++ # Exit if we aren't doing a library object file. ++ if test -z "$libobj"; then ++ if test -n "$gentop"; then ++ func_show_eval '${RM}r "$gentop"' ++ fi ++ ++ exit $EXIT_SUCCESS + fi +- fi +- case $destdir in +- [\\/]* | [A-Za-z]:[\\/]*) ;; +- *) +- for file in $files; do +- case $file in +- *.lo) ;; +- *) +- $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2 +- $echo "$help" 1>&2 +- exit $EXIT_FAILURE +- ;; +- esac +- done ++ ++ if test "$build_libtool_libs" != yes; then ++ if test -n "$gentop"; then ++ func_show_eval '${RM}r "$gentop"' ++ fi ++ ++ # Create an invalid libtool object if no PIC, so that we don't ++ # accidentally link it into a program. ++ # $show "echo timestamp > $libobj" ++ # $opt_dry_run || eval "echo timestamp > $libobj" || exit $? ++ exit $EXIT_SUCCESS ++ fi ++ ++ if test -n "$pic_flag" || test "$pic_mode" != default; then ++ # Only do commands if we really have different PIC objects. ++ reload_objs="$libobjs $reload_conv_objs" ++ output="$libobj" ++ func_execute_cmds "$reload_cmds" 'exit $?' ++ fi ++ ++ if test -n "$gentop"; then ++ func_show_eval '${RM}r "$gentop"' ++ fi ++ ++ exit $EXIT_SUCCESS + ;; +- esac + +- # This variable tells wrapper scripts just to set variables rather +- # than running their programs. +- libtool_install_magic="$magic" ++ prog) ++ case $host in ++ *cygwin*) func_stripname '' '.exe' "$output" ++ output=$func_stripname_result.exe;; ++ esac ++ test -n "$vinfo" && \ ++ func_warning "\`-version-info' is ignored for programs" + +- staticlibs= +- future_libdirs= +- current_libdirs= +- for file in $files; do ++ test -n "$release" && \ ++ func_warning "\`-release' is ignored for programs" + +- # Do each installation. +- case $file in +- *.$libext) +- # Do the static libraries later. +- staticlibs="$staticlibs $file" ++ test "$preload" = yes \ ++ && test "$dlopen_support" = unknown \ ++ && test "$dlopen_self" = unknown \ ++ && test "$dlopen_self_static" = unknown && \ ++ func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support." ++ ++ case $host in ++ *-*-rhapsody* | *-*-darwin1.[012]) ++ # On Rhapsody replace the C library is the System framework ++ compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'` ++ finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'` + ;; ++ esac + +- *.la) +- # Check to see that this really is a libtool archive. +- if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : +- else +- $echo "$modename: \`$file' is not a valid libtool archive" 1>&2 +- $echo "$help" 1>&2 +- exit $EXIT_FAILURE ++ case $host in ++ *-*-darwin*) ++ # Don't allow lazy linking, it breaks C++ global constructors ++ # But is supposedly fixed on 10.4 or later (yay!). ++ if test "$tagname" = CXX ; then ++ case ${MACOSX_DEPLOYMENT_TARGET-10.0} in ++ 10.[0123]) ++ compile_command="$compile_command ${wl}-bind_at_load" ++ finalize_command="$finalize_command ${wl}-bind_at_load" ++ ;; ++ esac + fi ++ # Time to change all our "foo.ltframework" stuff back to "-framework foo" ++ compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` ++ finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` ++ ;; ++ esac + +- library_names= +- old_library= +- relink_command= +- # If there is no directory component, then add one. +- case $file in +- */* | *\\*) . $file ;; +- *) . ./$file ;; +- esac + +- # Add the libdir to current_libdirs if it is the destination. +- if test "X$destdir" = "X$libdir"; then +- case "$current_libdirs " in +- *" $libdir "*) ;; +- *) current_libdirs="$current_libdirs $libdir" ;; ++ # move library search paths that coincide with paths to not yet ++ # installed libraries to the beginning of the library search list ++ new_libs= ++ for path in $notinst_path; do ++ case " $new_libs " in ++ *" -L$path/$objdir "*) ;; ++ *) ++ case " $compile_deplibs " in ++ *" -L$path/$objdir "*) ++ new_libs="$new_libs -L$path/$objdir" ;; + esac +- else +- # Note the libdir as a future libdir. +- case "$future_libdirs " in +- *" $libdir "*) ;; +- *) future_libdirs="$future_libdirs $libdir" ;; ++ ;; ++ esac ++ done ++ for deplib in $compile_deplibs; do ++ case $deplib in ++ -L*) ++ case " $new_libs " in ++ *" $deplib "*) ;; ++ *) new_libs="$new_libs $deplib" ;; + esac +- fi ++ ;; ++ *) new_libs="$new_libs $deplib" ;; ++ esac ++ done ++ compile_deplibs="$new_libs" + +- dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/ +- test "X$dir" = "X$file/" && dir= +- dir="$dir$objdir" + +- if test -n "$relink_command"; then +- # Determine the prefix the user has applied to our future dir. +- inst_prefix_dir=`$echo "$destdir" | $SED "s%$libdir\$%%"` ++ compile_command="$compile_command $compile_deplibs" ++ finalize_command="$finalize_command $finalize_deplibs" + +- # Don't allow the user to place us outside of our expected +- # location b/c this prevents finding dependent libraries that +- # are installed to the same prefix. +- # At present, this check doesn't affect windows .dll's that +- # are installed into $libdir/../bin (currently, that works fine) +- # but it's something to keep an eye on. +- if test "$inst_prefix_dir" = "$destdir"; then +- $echo "$modename: error: cannot install \`$file' to a directory not ending in $libdir" 1>&2 +- exit $EXIT_FAILURE +- fi ++ if test -n "$rpath$xrpath"; then ++ # If the user specified any rpath flags, then add them. ++ for libdir in $rpath $xrpath; do ++ # This is the magic to use -rpath. ++ case "$finalize_rpath " in ++ *" $libdir "*) ;; ++ *) finalize_rpath="$finalize_rpath $libdir" ;; ++ esac ++ done ++ fi + +- if test -n "$inst_prefix_dir"; then +- # Stick the inst_prefix_dir data into the link command. +- relink_command=`$echo "$relink_command" | $SP2NL | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%" | $NL2SP` ++ # Now hardcode the library paths ++ rpath= ++ hardcode_libdirs= ++ for libdir in $compile_rpath $finalize_rpath; do ++ if test -n "$hardcode_libdir_flag_spec"; then ++ if test -n "$hardcode_libdir_separator"; then ++ if test -z "$hardcode_libdirs"; then ++ hardcode_libdirs="$libdir" ++ else ++ # Just accumulate the unique libdirs. ++ case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in ++ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) ++ ;; ++ *) ++ hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" ++ ;; ++ esac ++ fi + else +- relink_command=`$echo "$relink_command" | $SP2NL | $SED "s%@inst_prefix_dir@%%" | $NL2SP` ++ eval flag=\"$hardcode_libdir_flag_spec\" ++ rpath="$rpath $flag" + fi ++ elif test -n "$runpath_var"; then ++ case "$perm_rpath " in ++ *" $libdir "*) ;; ++ *) perm_rpath="$perm_rpath $libdir" ;; ++ esac ++ fi ++ case $host in ++ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) ++ testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'` ++ case :$dllsearchpath: in ++ *":$libdir:"*) ;; ++ *) dllsearchpath="$dllsearchpath:$libdir";; ++ esac ++ case :$dllsearchpath: in ++ *":$testbindir:"*) ;; ++ *) dllsearchpath="$dllsearchpath:$testbindir";; ++ esac ++ ;; ++ esac ++ done ++ # Substitute the hardcoded libdirs into the rpath. ++ if test -n "$hardcode_libdir_separator" && ++ test -n "$hardcode_libdirs"; then ++ libdir="$hardcode_libdirs" ++ eval rpath=\" $hardcode_libdir_flag_spec\" ++ fi ++ compile_rpath="$rpath" + +- $echo "$modename: warning: relinking \`$file'" 1>&2 +- $show "$relink_command" +- if $run eval "$relink_command"; then : ++ rpath= ++ hardcode_libdirs= ++ for libdir in $finalize_rpath; do ++ if test -n "$hardcode_libdir_flag_spec"; then ++ if test -n "$hardcode_libdir_separator"; then ++ if test -z "$hardcode_libdirs"; then ++ hardcode_libdirs="$libdir" ++ else ++ # Just accumulate the unique libdirs. ++ case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in ++ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) ++ ;; ++ *) ++ hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" ++ ;; ++ esac ++ fi + else +- $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2 +- exit $EXIT_FAILURE ++ eval flag=\"$hardcode_libdir_flag_spec\" ++ rpath="$rpath $flag" + fi ++ elif test -n "$runpath_var"; then ++ case "$finalize_perm_rpath " in ++ *" $libdir "*) ;; ++ *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;; ++ esac + fi ++ done ++ # Substitute the hardcoded libdirs into the rpath. ++ if test -n "$hardcode_libdir_separator" && ++ test -n "$hardcode_libdirs"; then ++ libdir="$hardcode_libdirs" ++ eval rpath=\" $hardcode_libdir_flag_spec\" ++ fi ++ finalize_rpath="$rpath" + +- # See the names of the shared library. +- set dummy $library_names +- if test -n "$2"; then +- realname="$2" +- shift +- shift ++ if test -n "$libobjs" && test "$build_old_libs" = yes; then ++ # Transform all the library objects into standard objects. ++ compile_command=`$ECHO "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` ++ finalize_command=`$ECHO "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` ++ fi + +- srcname="$realname" +- test -n "$relink_command" && srcname="$realname"T ++ func_generate_dlsyms "$outputname" "@PROGRAM@" "no" + +- # Install the shared library and build the symlinks. +- $show "$install_prog $dir/$srcname $destdir/$realname" +- $run eval "$install_prog $dir/$srcname $destdir/$realname" || exit $? +- if test -n "$stripme" && test -n "$striplib"; then +- $show "$striplib $destdir/$realname" +- $run eval "$striplib $destdir/$realname" || exit $? +- fi ++ # template prelinking step ++ if test -n "$prelink_cmds"; then ++ func_execute_cmds "$prelink_cmds" 'exit $?' ++ fi + +- if test "$#" -gt 0; then +- # Delete the old symlinks, and create new ones. +- # Try `ln -sf' first, because the `ln' binary might depend on +- # the symlink we replace! Solaris /bin/ln does not understand -f, +- # so we also need to try rm && ln -s. +- for linkname +- do +- if test "$linkname" != "$realname"; then +- $show "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })" +- $run eval "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })" +- fi +- done +- fi ++ wrappers_required=yes ++ case $host in ++ *cygwin* | *mingw* ) ++ if test "$build_libtool_libs" != yes; then ++ wrappers_required=no ++ fi ++ ;; ++ *) ++ if test "$need_relink" = no || test "$build_libtool_libs" != yes; then ++ wrappers_required=no ++ fi ++ ;; ++ esac ++ if test "$wrappers_required" = no; then ++ # Replace the output file specification. ++ compile_command=`$ECHO "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` ++ link_command="$compile_command$compile_rpath" + +- # Do each command in the postinstall commands. +- lib="$destdir/$realname" +- cmds=$postinstall_cmds +- save_ifs="$IFS"; IFS='~' +- for cmd in $cmds; do +- IFS="$save_ifs" +- eval cmd=\"$cmd\" +- $show "$cmd" +- $run eval "$cmd" || { +- lt_exit=$? +- +- # Restore the uninstalled library and exit +- if test "$mode" = relink; then +- $run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)' +- fi ++ # We have no uninstalled library dependencies, so finalize right now. ++ exit_status=0 ++ func_show_eval "$link_command" 'exit_status=$?' + +- exit $lt_exit +- } +- done +- IFS="$save_ifs" ++ # Delete the generated files. ++ if test -f "$output_objdir/${outputname}S.${objext}"; then ++ func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"' + fi + +- # Install the pseudo-library for information purposes. +- name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` +- instname="$dir/$name"i +- $show "$install_prog $instname $destdir/$name" +- $run eval "$install_prog $instname $destdir/$name" || exit $? +- +- # Maybe install the static library, too. +- test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library" +- ;; ++ exit $exit_status ++ fi + +- *.lo) +- # Install (i.e. copy) a libtool object. ++ if test -n "$compile_shlibpath$finalize_shlibpath"; then ++ compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command" ++ fi ++ if test -n "$finalize_shlibpath"; then ++ finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command" ++ fi + +- # Figure out destination file name, if it wasn't already specified. +- if test -n "$destname"; then +- destfile="$destdir/$destname" +- else +- destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'` +- destfile="$destdir/$destfile" ++ compile_var= ++ finalize_var= ++ if test -n "$runpath_var"; then ++ if test -n "$perm_rpath"; then ++ # We should set the runpath_var. ++ rpath= ++ for dir in $perm_rpath; do ++ rpath="$rpath$dir:" ++ done ++ compile_var="$runpath_var=\"$rpath\$$runpath_var\" " + fi +- +- # Deduce the name of the destination old-style object file. +- case $destfile in +- *.lo) +- staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"` +- ;; +- *.$objext) +- staticdest="$destfile" +- destfile= +- ;; +- *) +- $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2 +- $echo "$help" 1>&2 +- exit $EXIT_FAILURE +- ;; +- esac +- +- # Install the libtool object if requested. +- if test -n "$destfile"; then +- $show "$install_prog $file $destfile" +- $run eval "$install_prog $file $destfile" || exit $? ++ if test -n "$finalize_perm_rpath"; then ++ # We should set the runpath_var. ++ rpath= ++ for dir in $finalize_perm_rpath; do ++ rpath="$rpath$dir:" ++ done ++ finalize_var="$runpath_var=\"$rpath\$$runpath_var\" " + fi ++ fi + +- # Install the old object if enabled. +- if test "$build_old_libs" = yes; then +- # Deduce the name of the old-style object file. +- staticobj=`$echo "X$file" | $Xsed -e "$lo2o"` +- +- $show "$install_prog $staticobj $staticdest" +- $run eval "$install_prog \$staticobj \$staticdest" || exit $? +- fi ++ if test "$no_install" = yes; then ++ # We don't need to create a wrapper script. ++ link_command="$compile_var$compile_command$compile_rpath" ++ # Replace the output file specification. ++ link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` ++ # Delete the old output file. ++ $opt_dry_run || $RM $output ++ # Link the executable and exit ++ func_show_eval "$link_command" 'exit $?' + exit $EXIT_SUCCESS +- ;; ++ fi + +- *) +- # Figure out destination file name, if it wasn't already specified. +- if test -n "$destname"; then +- destfile="$destdir/$destname" ++ if test "$hardcode_action" = relink; then ++ # Fast installation is not supported ++ link_command="$compile_var$compile_command$compile_rpath" ++ relink_command="$finalize_var$finalize_command$finalize_rpath" ++ ++ func_warning "this platform does not like uninstalled shared libraries" ++ func_warning "\`$output' will be relinked during installation" ++ else ++ if test "$fast_install" != no; then ++ link_command="$finalize_var$compile_command$finalize_rpath" ++ if test "$fast_install" = yes; then ++ relink_command=`$ECHO "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'` ++ else ++ # fast_install is set to needless ++ relink_command= ++ fi + else +- destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'` +- destfile="$destdir/$destfile" ++ link_command="$compile_var$compile_command$compile_rpath" ++ relink_command="$finalize_var$finalize_command$finalize_rpath" + fi ++ fi + +- # If the file is missing, and there is a .exe on the end, strip it +- # because it is most likely a libtool script we actually want to +- # install +- stripped_ext="" +- case $file in +- *.exe) +- if test ! -f "$file"; then +- file=`$echo $file|${SED} 's,.exe$,,'` +- stripped_ext=".exe" +- fi +- ;; +- esac +- +- # Do a test to see if this is really a libtool program. +- case $host in +- *cygwin*|*mingw*) +- wrapper=`$echo $file | ${SED} -e 's,.exe$,,'` +- ;; +- *) +- wrapper=$file +- ;; +- esac +- if (${SED} -e '4q' $wrapper | grep "^# Generated by .*$PACKAGE")>/dev/null 2>&1; then +- notinst_deplibs= +- relink_command= +- +- # Note that it is not necessary on cygwin/mingw to append a dot to +- # foo even if both foo and FILE.exe exist: automatic-append-.exe +- # behavior happens only for exec(3), not for open(2)! Also, sourcing +- # `FILE.' does not work on cygwin managed mounts. +- # +- # If there is no directory component, then add one. +- case $wrapper in +- */* | *\\*) . ${wrapper} ;; +- *) . ./${wrapper} ;; +- esac +- +- # Check the variables that should have been set. +- if test -z "$notinst_deplibs"; then +- $echo "$modename: invalid libtool wrapper script \`$wrapper'" 1>&2 +- exit $EXIT_FAILURE +- fi ++ # Replace the output file specification. ++ link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` + +- finalize=yes +- for lib in $notinst_deplibs; do +- # Check to see that each library is installed. +- libdir= +- if test -f "$lib"; then +- # If there is no directory component, then add one. +- case $lib in +- */* | *\\*) . $lib ;; +- *) . ./$lib ;; +- esac +- fi +- libfile="$libdir/"`$echo "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test +- if test -n "$libdir" && test ! -f "$libfile"; then +- $echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2 +- finalize=no +- fi +- done ++ # Delete the old output files. ++ $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname + +- relink_command= +- # Note that it is not necessary on cygwin/mingw to append a dot to +- # foo even if both foo and FILE.exe exist: automatic-append-.exe +- # behavior happens only for exec(3), not for open(2)! Also, sourcing +- # `FILE.' does not work on cygwin managed mounts. +- # +- # If there is no directory component, then add one. +- case $wrapper in +- */* | *\\*) . ${wrapper} ;; +- *) . ./${wrapper} ;; +- esac ++ func_show_eval "$link_command" 'exit $?' + +- outputname= +- if test "$fast_install" = no && test -n "$relink_command"; then +- if test "$finalize" = yes && test -z "$run"; then +- tmpdir=`func_mktempdir` +- file=`$echo "X$file$stripped_ext" | $Xsed -e 's%^.*/%%'` +- outputname="$tmpdir/$file" +- # Replace the output file specification. +- relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g' | $NL2SP` ++ # Now create the wrapper script. ++ func_verbose "creating $output" + +- $show "$relink_command" +- if $run eval "$relink_command"; then : +- else +- $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2 +- ${rm}r "$tmpdir" +- continue +- fi +- file="$outputname" +- else +- $echo "$modename: warning: cannot relink \`$file'" 1>&2 +- fi ++ # Quote the relink command for shipping. ++ if test -n "$relink_command"; then ++ # Preserve any variables that may affect compiler behavior ++ for var in $variables_saved_for_relink; do ++ if eval test -z \"\${$var+set}\"; then ++ relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command" ++ elif eval var_value=\$$var; test -z "$var_value"; then ++ relink_command="$var=; export $var; $relink_command" + else +- # Install the binary that we compiled earlier. +- file=`$echo "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"` ++ func_quote_for_eval "$var_value" ++ relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" + fi +- fi ++ done ++ relink_command="(cd `pwd`; $relink_command)" ++ relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"` ++ fi + +- # remove .exe since cygwin /usr/bin/install will append another +- # one anyway +- case $install_prog,$host in +- */usr/bin/install*,*cygwin*) +- case $file:$destfile in +- *.exe:*.exe) +- # this is ok +- ;; +- *.exe:*) +- destfile=$destfile.exe +- ;; +- *:*.exe) +- destfile=`$echo $destfile | ${SED} -e 's,.exe$,,'` +- ;; +- esac +- ;; ++ # Quote $ECHO for shipping. ++ if test "X$ECHO" = "X$SHELL $progpath --fallback-echo"; then ++ case $progpath in ++ [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";; ++ *) qecho="$SHELL `pwd`/$progpath --fallback-echo";; ++ esac ++ qecho=`$ECHO "X$qecho" | $Xsed -e "$sed_quote_subst"` ++ else ++ qecho=`$ECHO "X$ECHO" | $Xsed -e "$sed_quote_subst"` ++ fi ++ ++ # Only actually do things if not in dry run mode. ++ $opt_dry_run || { ++ # win32 will think the script is a binary if it has ++ # a .exe suffix, so we strip it off here. ++ case $output in ++ *.exe) func_stripname '' '.exe' "$output" ++ output=$func_stripname_result ;; ++ esac ++ # test for cygwin because mv fails w/o .exe extensions ++ case $host in ++ *cygwin*) ++ exeext=.exe ++ func_stripname '' '.exe' "$outputname" ++ outputname=$func_stripname_result ;; ++ *) exeext= ;; + esac +- $show "$install_prog$stripme $file $destfile" +- $run eval "$install_prog\$stripme \$file \$destfile" || exit $? +- test -n "$outputname" && ${rm}r "$tmpdir" +- ;; +- esac +- done ++ case $host in ++ *cygwin* | *mingw* ) ++ func_dirname_and_basename "$output" "" "." ++ output_name=$func_basename_result ++ output_path=$func_dirname_result ++ cwrappersource="$output_path/$objdir/lt-$output_name.c" ++ cwrapper="$output_path/$output_name.exe" ++ $RM $cwrappersource $cwrapper ++ trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15 ++ ++ func_emit_cwrapperexe_src > $cwrappersource ++ ++ # we should really use a build-platform specific compiler ++ # here, but OTOH, the wrappers (shell script and this C one) ++ # are only useful if you want to execute the "real" binary. ++ # Since the "real" binary is built for $host, then this ++ # wrapper might as well be built for $host, too. ++ $opt_dry_run || { ++ $LTCC $LTCFLAGS -o $cwrapper $cwrappersource ++ $STRIP $cwrapper ++ } + +- for file in $staticlibs; do +- name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` ++ # Now, create the wrapper script for func_source use: ++ func_ltwrapper_scriptname $cwrapper ++ $RM $func_ltwrapper_scriptname_result ++ trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15 ++ $opt_dry_run || { ++ # note: this script will not be executed, so do not chmod. ++ if test "x$build" = "x$host" ; then ++ $cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result ++ else ++ func_emit_wrapper no > $func_ltwrapper_scriptname_result ++ fi ++ } ++ ;; ++ * ) ++ $RM $output ++ trap "$RM $output; exit $EXIT_FAILURE" 1 2 15 + +- # Set up the ranlib parameters. +- oldlib="$destdir/$name" ++ func_emit_wrapper no > $output ++ chmod +x $output ++ ;; ++ esac ++ } ++ exit $EXIT_SUCCESS ++ ;; ++ esac + +- $show "$install_prog $file $oldlib" +- $run eval "$install_prog \$file \$oldlib" || exit $? ++ # See if we need to build an old-fashioned archive. ++ for oldlib in $oldlibs; do + +- if test -n "$stripme" && test -n "$old_striplib"; then +- $show "$old_striplib $oldlib" +- $run eval "$old_striplib $oldlib" || exit $? ++ if test "$build_libtool_libs" = convenience; then ++ oldobjs="$libobjs_save $symfileobj" ++ addlibs="$convenience" ++ build_libtool_libs=no ++ else ++ if test "$build_libtool_libs" = module; then ++ oldobjs="$libobjs_save" ++ build_libtool_libs=no ++ else ++ oldobjs="$old_deplibs $non_pic_objects" ++ if test "$preload" = yes && test -f "$symfileobj"; then ++ oldobjs="$oldobjs $symfileobj" ++ fi ++ fi ++ addlibs="$old_convenience" + fi + +- # Do each command in the postinstall commands. +- cmds=$old_postinstall_cmds +- save_ifs="$IFS"; IFS='~' +- for cmd in $cmds; do +- IFS="$save_ifs" +- eval cmd=\"$cmd\" +- $show "$cmd" +- $run eval "$cmd" || exit $? +- done +- IFS="$save_ifs" +- done ++ if test -n "$addlibs"; then ++ gentop="$output_objdir/${outputname}x" ++ generated="$generated $gentop" + +- if test -n "$future_libdirs"; then +- $echo "$modename: warning: remember to run \`$progname --finish$future_libdirs'" 1>&2 +- fi ++ func_extract_archives $gentop $addlibs ++ oldobjs="$oldobjs $func_extract_archives_result" ++ fi + +- if test -n "$current_libdirs"; then +- # Maybe just do a dry run. +- test -n "$run" && current_libdirs=" -n$current_libdirs" +- exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs' +- else +- exit $EXIT_SUCCESS +- fi +- ;; ++ # Do each command in the archive commands. ++ if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then ++ cmds=$old_archive_from_new_cmds ++ else + +- # libtool finish mode +- finish) +- modename="$modename: finish" +- libdirs="$nonopt" +- admincmds= ++ # Add any objects from preloaded convenience libraries ++ if test -n "$dlprefiles"; then ++ gentop="$output_objdir/${outputname}x" ++ generated="$generated $gentop" + +- if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then +- for dir +- do +- libdirs="$libdirs $dir" +- done ++ func_extract_archives $gentop $dlprefiles ++ oldobjs="$oldobjs $func_extract_archives_result" ++ fi + +- for libdir in $libdirs; do +- if test -n "$finish_cmds"; then +- # Do each command in the finish commands. +- cmds=$finish_cmds +- save_ifs="$IFS"; IFS='~' +- for cmd in $cmds; do +- IFS="$save_ifs" +- eval cmd=\"$cmd\" +- $show "$cmd" +- $run eval "$cmd" || admincmds="$admincmds +- $cmd" ++ # POSIX demands no paths to be encoded in archives. We have ++ # to avoid creating archives with duplicate basenames if we ++ # might have to extract them afterwards, e.g., when creating a ++ # static archive out of a convenience library, or when linking ++ # the entirety of a libtool archive into another (currently ++ # not supported by libtool). ++ if (for obj in $oldobjs ++ do ++ func_basename "$obj" ++ $ECHO "$func_basename_result" ++ done | sort | sort -uc >/dev/null 2>&1); then ++ : ++ else ++ $ECHO "copying selected object files to avoid basename conflicts..." ++ gentop="$output_objdir/${outputname}x" ++ generated="$generated $gentop" ++ func_mkdir_p "$gentop" ++ save_oldobjs=$oldobjs ++ oldobjs= ++ counter=1 ++ for obj in $save_oldobjs ++ do ++ func_basename "$obj" ++ objbase="$func_basename_result" ++ case " $oldobjs " in ++ " ") oldobjs=$obj ;; ++ *[\ /]"$objbase "*) ++ while :; do ++ # Make sure we don't pick an alternate name that also ++ # overlaps. ++ newobj=lt$counter-$objbase ++ func_arith $counter + 1 ++ counter=$func_arith_result ++ case " $oldobjs " in ++ *[\ /]"$newobj "*) ;; ++ *) if test ! -f "$gentop/$newobj"; then break; fi ;; ++ esac ++ done ++ func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj" ++ oldobjs="$oldobjs $gentop/$newobj" ++ ;; ++ *) oldobjs="$oldobjs $obj" ;; ++ esac + done +- IFS="$save_ifs" +- fi +- if test -n "$finish_eval"; then +- # Do the single finish_eval. +- eval cmds=\"$finish_eval\" +- $run eval "$cmds" || admincmds="$admincmds +- $cmds" + fi +- done +- fi +- +- # Exit here if they wanted silent mode. +- test "$show" = : && exit $EXIT_SUCCESS ++ eval cmds=\"$old_archive_cmds\" + +- $echo "X----------------------------------------------------------------------" | $Xsed +- $echo "Libraries have been installed in:" +- for libdir in $libdirs; do +- $echo " $libdir" ++ func_len " $cmds" ++ len=$func_len_result ++ if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then ++ cmds=$old_archive_cmds ++ else ++ # the command line is too long to link in one step, link in parts ++ func_verbose "using piecewise archive linking..." ++ save_RANLIB=$RANLIB ++ RANLIB=: ++ objlist= ++ concat_cmds= ++ save_oldobjs=$oldobjs ++ oldobjs= ++ # Is there a better way of finding the last object in the list? ++ for obj in $save_oldobjs ++ do ++ last_oldobj=$obj ++ done ++ eval test_cmds=\"$old_archive_cmds\" ++ func_len " $test_cmds" ++ len0=$func_len_result ++ len=$len0 ++ for obj in $save_oldobjs ++ do ++ func_len " $obj" ++ func_arith $len + $func_len_result ++ len=$func_arith_result ++ func_append objlist " $obj" ++ if test "$len" -lt "$max_cmd_len"; then ++ : ++ else ++ # the above command should be used before it gets too long ++ oldobjs=$objlist ++ if test "$obj" = "$last_oldobj" ; then ++ RANLIB=$save_RANLIB ++ fi ++ test -z "$concat_cmds" || concat_cmds=$concat_cmds~ ++ eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\" ++ objlist= ++ len=$len0 ++ fi ++ done ++ RANLIB=$save_RANLIB ++ oldobjs=$objlist ++ if test "X$oldobjs" = "X" ; then ++ eval cmds=\"\$concat_cmds\" ++ else ++ eval cmds=\"\$concat_cmds~\$old_archive_cmds\" ++ fi ++ fi ++ fi ++ func_execute_cmds "$cmds" 'exit $?' + done +- $echo +- $echo "If you ever happen to want to link against installed libraries" +- $echo "in a given directory, LIBDIR, you must either use libtool, and" +- $echo "specify the full pathname of the library, or use the \`-LLIBDIR'" +- $echo "flag during linking and do at least one of the following:" +- if test -n "$shlibpath_var"; then +- $echo " - add LIBDIR to the \`$shlibpath_var' environment variable" +- $echo " during execution" +- fi +- if test -n "$runpath_var"; then +- $echo " - add LIBDIR to the \`$runpath_var' environment variable" +- $echo " during linking" +- fi +- if test -n "$hardcode_libdir_flag_spec"; then +- libdir=LIBDIR +- eval flag=\"$hardcode_libdir_flag_spec\" +- +- $echo " - use the \`$flag' linker flag" +- fi +- if test -n "$admincmds"; then +- $echo " - have your system administrator run these commands:$admincmds" +- fi +- if test -f /etc/ld.so.conf; then +- $echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" +- fi +- $echo +- $echo "See any operating system documentation about shared libraries for" +- $echo "more information, such as the ld(1) and ld.so(8) manual pages." +- $echo "X----------------------------------------------------------------------" | $Xsed +- exit $EXIT_SUCCESS +- ;; + +- # libtool execute mode +- execute) +- modename="$modename: execute" +- +- # The first argument is the command name. +- cmd="$nonopt" +- if test -z "$cmd"; then +- $echo "$modename: you must specify a COMMAND" 1>&2 +- $echo "$help" +- exit $EXIT_FAILURE +- fi ++ test -n "$generated" && \ ++ func_show_eval "${RM}r$generated" + +- # Handle -dlopen flags immediately. +- for file in $execute_dlfiles; do +- if test ! -f "$file"; then +- $echo "$modename: \`$file' is not a file" 1>&2 +- $echo "$help" 1>&2 +- exit $EXIT_FAILURE +- fi ++ # Now create the libtool archive. ++ case $output in ++ *.la) ++ old_library= ++ test "$build_old_libs" = yes && old_library="$libname.$libext" ++ func_verbose "creating $output" + +- dir= +- case $file in +- *.la) +- # Check to see that this really is a libtool archive. +- if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : ++ # Preserve any variables that may affect compiler behavior ++ for var in $variables_saved_for_relink; do ++ if eval test -z \"\${$var+set}\"; then ++ relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command" ++ elif eval var_value=\$$var; test -z "$var_value"; then ++ relink_command="$var=; export $var; $relink_command" + else +- $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 +- $echo "$help" 1>&2 +- exit $EXIT_FAILURE ++ func_quote_for_eval "$var_value" ++ relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" + fi ++ done ++ # Quote the link command for shipping. ++ relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)" ++ relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"` ++ if test "$hardcode_automatic" = yes ; then ++ relink_command= ++ fi + +- # Read the libtool library. +- dlname= +- library_names= ++ # Only create the output if not a dry run. ++ $opt_dry_run || { ++ for installed in no yes; do ++ if test "$installed" = yes; then ++ if test -z "$install_libdir"; then ++ break ++ fi ++ output="$output_objdir/$outputname"i ++ # Replace all uninstalled libtool libraries with the installed ones ++ newdependency_libs= ++ for deplib in $dependency_libs; do ++ case $deplib in ++ *.la) ++ func_basename "$deplib" ++ name="$func_basename_result" ++ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` ++ test -z "$libdir" && \ ++ func_fatal_error "\`$deplib' is not a valid libtool archive" ++ newdependency_libs="$newdependency_libs $libdir/$name" ++ ;; ++ *) newdependency_libs="$newdependency_libs $deplib" ;; ++ esac ++ done ++ dependency_libs="$newdependency_libs" ++ newdlfiles= ++ ++ for lib in $dlfiles; do ++ case $lib in ++ *.la) ++ func_basename "$lib" ++ name="$func_basename_result" ++ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` ++ test -z "$libdir" && \ ++ func_fatal_error "\`$lib' is not a valid libtool archive" ++ newdlfiles="$newdlfiles $libdir/$name" ++ ;; ++ *) newdlfiles="$newdlfiles $lib" ;; ++ esac ++ done ++ dlfiles="$newdlfiles" ++ newdlprefiles= ++ for lib in $dlprefiles; do ++ case $lib in ++ *.la) ++ # Only pass preopened files to the pseudo-archive (for ++ # eventual linking with the app. that links it) if we ++ # didn't already link the preopened objects directly into ++ # the library: ++ func_basename "$lib" ++ name="$func_basename_result" ++ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` ++ test -z "$libdir" && \ ++ func_fatal_error "\`$lib' is not a valid libtool archive" ++ newdlprefiles="$newdlprefiles $libdir/$name" ++ ;; ++ esac ++ done ++ dlprefiles="$newdlprefiles" ++ else ++ newdlfiles= ++ for lib in $dlfiles; do ++ case $lib in ++ [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; ++ *) abs=`pwd`"/$lib" ;; ++ esac ++ newdlfiles="$newdlfiles $abs" ++ done ++ dlfiles="$newdlfiles" ++ newdlprefiles= ++ for lib in $dlprefiles; do ++ case $lib in ++ [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; ++ *) abs=`pwd`"/$lib" ;; ++ esac ++ newdlprefiles="$newdlprefiles $abs" ++ done ++ dlprefiles="$newdlprefiles" ++ fi ++ $RM $output ++ # place dlname in correct position for cygwin ++ tdlname=$dlname ++ case $host,$output,$installed,$module,$dlname in ++ *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;; ++ esac ++ $ECHO > $output "\ ++# $outputname - a libtool library file ++# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION ++# ++# Please DO NOT delete this file! ++# It is necessary for linking the library. + +- # If there is no directory component, then add one. +- case $file in +- */* | *\\*) . $file ;; +- *) . ./$file ;; +- esac ++# The name that we can dlopen(3). ++dlname='$tdlname' + +- # Skip this library if it cannot be dlopened. +- if test -z "$dlname"; then +- # Warn if it was a shared library. +- test -n "$library_names" && $echo "$modename: warning: \`$file' was not linked with \`-export-dynamic'" +- continue +- fi ++# Names of this library. ++library_names='$library_names' + +- dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` +- test "X$dir" = "X$file" && dir=. ++# The name of the static archive. ++old_library='$old_library' + +- if test -f "$dir/$objdir/$dlname"; then +- dir="$dir/$objdir" +- else +- if test ! -f "$dir/$dlname"; then +- $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2 +- exit $EXIT_FAILURE +- fi +- fi +- ;; ++# Linker flags that can not go in dependency_libs. ++inherited_linker_flags='$new_inherited_linker_flags' + +- *.lo) +- # Just add the directory containing the .lo file. +- dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` +- test "X$dir" = "X$file" && dir=. +- ;; ++# Libraries that this one depends upon. ++dependency_libs='$dependency_libs' + +- *) +- $echo "$modename: warning \`-dlopen' is ignored for non-libtool libraries and objects" 1>&2 +- continue +- ;; +- esac ++# Names of additional weak libraries provided by this library ++weak_library_names='$weak_libs' + +- # Get the absolute pathname. +- absdir=`cd "$dir" && pwd` +- test -n "$absdir" && dir="$absdir" ++# Version information for $libname. ++current=$current ++age=$age ++revision=$revision + +- # Now add the directory to shlibpath_var. +- if eval "test -z \"\$$shlibpath_var\""; then +- eval "$shlibpath_var=\"\$dir\"" +- else +- eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\"" +- fi +- done ++# Is this an already installed library? ++installed=$installed + +- # This variable tells wrapper scripts just to set shlibpath_var +- # rather than running their programs. +- libtool_execute_magic="$magic" ++# Should we warn about portability when linking against -modules? ++shouldnotlink=$module + +- # Check if any of the arguments is a wrapper script. +- args= +- for file +- do +- case $file in +- -*) ;; +- *) +- # Do a test to see if this is really a libtool program. +- if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then +- # If there is no directory component, then add one. +- case $file in +- */* | *\\*) . $file ;; +- *) . ./$file ;; +- esac ++# Files to dlopen/dlpreopen ++dlopen='$dlfiles' ++dlpreopen='$dlprefiles' + +- # Transform arg to wrapped name. +- file="$progdir/$program" +- fi +- ;; +- esac +- # Quote arguments (to preserve shell metacharacters). +- file=`$echo "X$file" | $Xsed -e "$sed_quote_subst"` +- args="$args \"$file\"" +- done ++# Directory that this library needs to be installed in: ++libdir='$install_libdir'" ++ if test "$installed" = no && test "$need_relink" = yes; then ++ $ECHO >> $output "\ ++relink_command=\"$relink_command\"" ++ fi ++ done ++ } + +- if test -z "$run"; then +- if test -n "$shlibpath_var"; then +- # Export the shlibpath_var. +- eval "export $shlibpath_var" +- fi ++ # Do a symbolic link so that the libtool archive can be found in ++ # LD_LIBRARY_PATH before the program is installed. ++ func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?' ++ ;; ++ esac ++ exit $EXIT_SUCCESS ++} + +- # Restore saved environment variables +- for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES +- do +- eval "if test \"\${save_$lt_var+set}\" = set; then +- $lt_var=\$save_$lt_var; export $lt_var +- fi" +- done ++{ test "$mode" = link || test "$mode" = relink; } && ++ func_mode_link ${1+"$@"} + +- # Now prepare to actually exec the command. +- exec_cmd="\$cmd$args" +- else +- # Display what would be done. +- if test -n "$shlibpath_var"; then +- eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\"" +- $echo "export $shlibpath_var" +- fi +- $echo "$cmd$args" +- exit $EXIT_SUCCESS +- fi +- ;; + +- # libtool clean and uninstall mode +- clean | uninstall) +- modename="$modename: $mode" +- rm="$nonopt" ++# func_mode_uninstall arg... ++func_mode_uninstall () ++{ ++ $opt_debug ++ RM="$nonopt" + files= + rmforce= + exit_status=0 +@@ -6539,30 +7676,28 @@ + for arg + do + case $arg in +- -f) rm="$rm $arg"; rmforce=yes ;; +- -*) rm="$rm $arg" ;; ++ -f) RM="$RM $arg"; rmforce=yes ;; ++ -*) RM="$RM $arg" ;; + *) files="$files $arg" ;; + esac + done + +- if test -z "$rm"; then +- $echo "$modename: you must specify an RM program" 1>&2 +- $echo "$help" 1>&2 +- exit $EXIT_FAILURE +- fi ++ test -z "$RM" && \ ++ func_fatal_help "you must specify an RM program" + + rmdirs= + + origobjdir="$objdir" + for file in $files; do +- dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` +- if test "X$dir" = "X$file"; then +- dir=. ++ func_dirname "$file" "" "." ++ dir="$func_dirname_result" ++ if test "X$dir" = X.; then + objdir="$origobjdir" + else + objdir="$dir/$origobjdir" + fi +- name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` ++ func_basename "$file" ++ name="$func_basename_result" + test "$mode" = uninstall && objdir="$dir" + + # Remember objdir for removal later, being careful to avoid duplicates +@@ -6574,9 +7709,9 @@ + fi + + # Don't error if the file doesn't exist and rm -f was used. +- if (test -L "$file") >/dev/null 2>&1 \ +- || (test -h "$file") >/dev/null 2>&1 \ +- || test -f "$file"; then ++ if { test -L "$file"; } >/dev/null 2>&1 || ++ { test -h "$file"; } >/dev/null 2>&1 || ++ test -f "$file"; then + : + elif test -d "$file"; then + exit_status=1 +@@ -6590,8 +7725,8 @@ + case $name in + *.la) + # Possibly a libtool archive, so verify it. +- if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then +- . $dir/$name ++ if func_lalib_p "$file"; then ++ func_source $dir/$name + + # Delete the libtool libraries and symlinks. + for n in $library_names; do +@@ -6606,39 +7741,17 @@ + *" $dlname "*) ;; + *) rmfiles="$rmfiles $objdir/$dlname" ;; + esac +- test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i" ++ test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i" + ;; + uninstall) + if test -n "$library_names"; then + # Do each command in the postuninstall commands. +- cmds=$postuninstall_cmds +- save_ifs="$IFS"; IFS='~' +- for cmd in $cmds; do +- IFS="$save_ifs" +- eval cmd=\"$cmd\" +- $show "$cmd" +- $run eval "$cmd" +- if test "$?" -ne 0 && test "$rmforce" != yes; then +- exit_status=1 +- fi +- done +- IFS="$save_ifs" ++ func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1' + fi + + if test -n "$old_library"; then + # Do each command in the old_postuninstall commands. +- cmds=$old_postuninstall_cmds +- save_ifs="$IFS"; IFS='~' +- for cmd in $cmds; do +- IFS="$save_ifs" +- eval cmd=\"$cmd\" +- $show "$cmd" +- $run eval "$cmd" +- if test "$?" -ne 0 && test "$rmforce" != yes; then +- exit_status=1 +- fi +- done +- IFS="$save_ifs" ++ func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1' + fi + # FIXME: should reinstall the best remaining shared library. + ;; +@@ -6648,20 +7761,20 @@ + + *.lo) + # Possibly a libtool object, so verify it. +- if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then ++ if func_lalib_p "$file"; then + + # Read the .lo file +- . $dir/$name ++ func_source $dir/$name + + # Add PIC object to the list of files to remove. +- if test -n "$pic_object" \ +- && test "$pic_object" != none; then ++ if test -n "$pic_object" && ++ test "$pic_object" != none; then + rmfiles="$rmfiles $dir/$pic_object" + fi + + # Add non-PIC object to the list of files to remove. +- if test -n "$non_pic_object" \ +- && test "$non_pic_object" != none; then ++ if test -n "$non_pic_object" && ++ test "$non_pic_object" != none; then + rmfiles="$rmfiles $dir/$non_pic_object" + fi + fi +@@ -6672,17 +7785,26 @@ + noexename=$name + case $file in + *.exe) +- file=`$echo $file|${SED} 's,.exe$,,'` +- noexename=`$echo $name|${SED} 's,.exe$,,'` ++ func_stripname '' '.exe' "$file" ++ file=$func_stripname_result ++ func_stripname '' '.exe' "$name" ++ noexename=$func_stripname_result + # $file with .exe has already been added to rmfiles, + # add $file without .exe + rmfiles="$rmfiles $file" + ;; + esac + # Do a test to see if this is a libtool program. +- if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then +- relink_command= +- . $dir/$noexename ++ if func_ltwrapper_p "$file"; then ++ if func_ltwrapper_executable_p "$file"; then ++ func_ltwrapper_scriptname "$file" ++ relink_command= ++ func_source $func_ltwrapper_scriptname_result ++ rmfiles="$rmfiles $func_ltwrapper_scriptname_result" ++ else ++ relink_command= ++ func_source $dir/$noexename ++ fi + + # note $name still contains .exe if it was in $file originally + # as does the version of $file that was added into $rmfiles +@@ -6697,239 +7819,38 @@ + fi + ;; + esac +- $show "$rm $rmfiles" +- $run $rm $rmfiles || exit_status=1 ++ func_show_eval "$RM $rmfiles" 'exit_status=1' + done + objdir="$origobjdir" + + # Try to remove the ${objdir}s in the directories where we deleted files + for dir in $rmdirs; do + if test -d "$dir"; then +- $show "rmdir $dir" +- $run rmdir $dir >/dev/null 2>&1 ++ func_show_eval "rmdir $dir >/dev/null 2>&1" + fi + done + + exit $exit_status +- ;; ++} + +- "") +- $echo "$modename: you must specify a MODE" 1>&2 +- $echo "$generic_help" 1>&2 +- exit $EXIT_FAILURE +- ;; +- esac ++{ test "$mode" = uninstall || test "$mode" = clean; } && ++ func_mode_uninstall ${1+"$@"} + +- if test -z "$exec_cmd"; then +- $echo "$modename: invalid operation mode \`$mode'" 1>&2 +- $echo "$generic_help" 1>&2 +- exit $EXIT_FAILURE +- fi +-fi # test -z "$show_help" ++test -z "$mode" && { ++ help="$generic_help" ++ func_fatal_help "you must specify a MODE" ++} ++ ++test -z "$exec_cmd" && \ ++ func_fatal_help "invalid operation mode \`$mode'" + + if test -n "$exec_cmd"; then +- eval exec $exec_cmd ++ eval exec "$exec_cmd" + exit $EXIT_FAILURE + fi + +-# We need to display help for each of the modes. +-case $mode in +-"") $echo \ +-"Usage: $modename [OPTION]... [MODE-ARG]... +- +-Provide generalized library-building support services. +- +- --config show all configuration variables +- --debug enable verbose shell tracing +--n, --dry-run display commands without modifying any files +- --features display basic configuration information and exit +- --finish same as \`--mode=finish' +- --help display this help message and exit +- --mode=MODE use operation mode MODE [default=inferred from MODE-ARGS] +- --quiet same as \`--silent' +- --silent don't print informational messages +- --tag=TAG use configuration variables from tag TAG +- --version print version information +- +-MODE must be one of the following: +- +- clean remove files from the build directory +- compile compile a source file into a libtool object +- execute automatically set library path, then run a program +- finish complete the installation of libtool libraries +- install install libraries or executables +- link create a library or an executable +- uninstall remove libraries from an installed directory +- +-MODE-ARGS vary depending on the MODE. Try \`$modename --help --mode=MODE' for +-a more detailed description of MODE. +- +-Report bugs to ." +- exit $EXIT_SUCCESS +- ;; +- +-clean) +- $echo \ +-"Usage: $modename [OPTION]... --mode=clean RM [RM-OPTION]... FILE... +- +-Remove files from the build directory. +- +-RM is the name of the program to use to delete files associated with each FILE +-(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed +-to RM. +- +-If FILE is a libtool library, object or program, all the files associated +-with it are deleted. Otherwise, only FILE itself is deleted using RM." +- ;; +- +-compile) +- $echo \ +-"Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE +- +-Compile a source file into a libtool library object. +- +-This mode accepts the following additional options: +- +- -o OUTPUT-FILE set the output file name to OUTPUT-FILE +- -prefer-pic try to building PIC objects only +- -prefer-non-pic try to building non-PIC objects only +- -static always build a \`.o' file suitable for static linking +- +-COMPILE-COMMAND is a command to be used in creating a \`standard' object file +-from the given SOURCEFILE. +- +-The output file name is determined by removing the directory component from +-SOURCEFILE, then substituting the C source code suffix \`.c' with the +-library object suffix, \`.lo'." +- ;; +- +-execute) +- $echo \ +-"Usage: $modename [OPTION]... --mode=execute COMMAND [ARGS]... +- +-Automatically set library path, then run a program. +- +-This mode accepts the following additional options: +- +- -dlopen FILE add the directory containing FILE to the library path +- +-This mode sets the library path environment variable according to \`-dlopen' +-flags. +- +-If any of the ARGS are libtool executable wrappers, then they are translated +-into their corresponding uninstalled binary, and any of their required library +-directories are added to the library path. +- +-Then, COMMAND is executed, with ARGS as arguments." +- ;; +- +-finish) +- $echo \ +-"Usage: $modename [OPTION]... --mode=finish [LIBDIR]... +- +-Complete the installation of libtool libraries. +- +-Each LIBDIR is a directory that contains libtool libraries. +- +-The commands that this mode executes may require superuser privileges. Use +-the \`--dry-run' option if you just want to see what would be executed." +- ;; +- +-install) +- $echo \ +-"Usage: $modename [OPTION]... --mode=install INSTALL-COMMAND... +- +-Install executables or libraries. +- +-INSTALL-COMMAND is the installation command. The first component should be +-either the \`install' or \`cp' program. +- +-The rest of the components are interpreted as arguments to that command (only +-BSD-compatible install options are recognized)." +- ;; +- +-link) +- $echo \ +-"Usage: $modename [OPTION]... --mode=link LINK-COMMAND... +- +-Link object files or libraries together to form another library, or to +-create an executable program. ++exit $exit_status + +-LINK-COMMAND is a command using the C compiler that you would use to create +-a program from several object files. +- +-The following components of LINK-COMMAND are treated specially: +- +- -all-static do not do any dynamic linking at all +- -avoid-version do not add a version suffix if possible +- -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime +- -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols +- -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) +- -export-symbols SYMFILE +- try to export only the symbols listed in SYMFILE +- -export-symbols-regex REGEX +- try to export only the symbols matching REGEX +- -LLIBDIR search LIBDIR for required installed libraries +- -lNAME OUTPUT-FILE requires the installed library libNAME +- -module build a library that can dlopened +- -no-fast-install disable the fast-install mode +- -no-install link a not-installable executable +- -no-undefined declare that a library does not refer to external symbols +- -o OUTPUT-FILE create OUTPUT-FILE from the specified objects +- -objectlist FILE Use a list of object files found in FILE to specify objects +- -precious-files-regex REGEX +- don't remove output files matching REGEX +- -release RELEASE specify package release information +- -rpath LIBDIR the created library will eventually be installed in LIBDIR +- -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries +- -static do not do any dynamic linking of uninstalled libtool libraries +- -static-libtool-libs +- do not do any dynamic linking of libtool libraries +- -version-info CURRENT[:REVISION[:AGE]] +- specify library version info [each variable defaults to 0] +- +-All other options (arguments beginning with \`-') are ignored. +- +-Every other argument is treated as a filename. Files ending in \`.la' are +-treated as uninstalled libtool libraries, other files are standard or library +-object files. +- +-If the OUTPUT-FILE ends in \`.la', then a libtool library is created, +-only library objects (\`.lo' files) may be specified, and \`-rpath' is +-required, except when creating a convenience library. +- +-If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created +-using \`ar' and \`ranlib', or on Windows using \`lib'. +- +-If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file +-is created, otherwise an executable program is created." +- ;; +- +-uninstall) +- $echo \ +-"Usage: $modename [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE... +- +-Remove libraries from an installation directory. +- +-RM is the name of the program to use to delete files associated with each FILE +-(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed +-to RM. +- +-If FILE is a libtool library, all the files associated with it are deleted. +-Otherwise, only FILE itself is deleted using RM." +- ;; +- +-*) +- $echo "$modename: invalid operation mode \`$mode'" 1>&2 +- $echo "$help" 1>&2 +- exit $EXIT_FAILURE +- ;; +-esac +- +-$echo +-$echo "Try \`$modename --help' for more information about other modes." +- +-exit $? + + # The TAGs below are defined such that we never get into a situation + # in which we disable both kinds of libraries. Given conflicting +@@ -6943,14 +7864,17 @@ + # configuration. But we'll never go from static-only to shared-only. + + # ### BEGIN LIBTOOL TAG CONFIG: disable-shared +-disable_libs=shared ++build_libtool_libs=no ++build_old_libs=yes + # ### END LIBTOOL TAG CONFIG: disable-shared + + # ### BEGIN LIBTOOL TAG CONFIG: disable-static +-disable_libs=static ++build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac` + # ### END LIBTOOL TAG CONFIG: disable-static + + # Local Variables: + # mode:shell-script + # sh-indentation:2 + # End: ++# vi:sw=2 ++ +Index: gnome-session-2.25.90/splash/Makefile.in +=================================================================== +--- gnome-session-2.25.90.orig/splash/Makefile.in 2009-02-04 18:29:26.000000000 +0000 ++++ gnome-session-2.25.90/splash/Makefile.in 2009-02-04 18:30:00.000000000 +0000 +@@ -100,10 +100,6 @@ + COMPAT_LIBS = @COMPAT_LIBS@ + CPP = @CPP@ + CPPFLAGS = @CPPFLAGS@ +-CXX = @CXX@ +-CXXCPP = @CXXCPP@ +-CXXDEPMODE = @CXXDEPMODE@ +-CXXFLAGS = @CXXFLAGS@ + CYGPATH_W = @CYGPATH_W@ + DATADIRNAME = @DATADIRNAME@ + DBUS_GLIB_CFLAGS = @DBUS_GLIB_CFLAGS@ +@@ -113,7 +109,7 @@ + DISABLE_DEPRECATED = @DISABLE_DEPRECATED@ + DISABLE_DEPRECATED_CFLAGS = @DISABLE_DEPRECATED_CFLAGS@ + DSYMUTIL = @DSYMUTIL@ +-ECHO = @ECHO@ ++DUMPBIN = @DUMPBIN@ + ECHO_C = @ECHO_C@ + ECHO_N = @ECHO_N@ + ECHO_T = @ECHO_T@ +@@ -121,8 +117,7 @@ + EGG_SMCLIENT_LIBS = @EGG_SMCLIENT_LIBS@ + EGREP = @EGREP@ + EXEEXT = @EXEEXT@ +-F77 = @F77@ +-FFLAGS = @FFLAGS@ ++FGREP = @FGREP@ + GCONFTOOL = @GCONFTOOL@ + GCONF_CFLAGS = @GCONF_CFLAGS@ + GCONF_LIBS = @GCONF_LIBS@ +@@ -147,14 +142,35 @@ + INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ + INSTOBJEXT = @INSTOBJEXT@ + INTLLIBS = @INTLLIBS@ ++INTLTOOL_CAVES_RULE = @INTLTOOL_CAVES_RULE@ ++INTLTOOL_DESKTOP_RULE = @INTLTOOL_DESKTOP_RULE@ ++INTLTOOL_DIRECTORY_RULE = @INTLTOOL_DIRECTORY_RULE@ + INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ ++INTLTOOL_KBD_RULE = @INTLTOOL_KBD_RULE@ ++INTLTOOL_KEYS_RULE = @INTLTOOL_KEYS_RULE@ + INTLTOOL_MERGE = @INTLTOOL_MERGE@ ++INTLTOOL_OAF_RULE = @INTLTOOL_OAF_RULE@ + INTLTOOL_PERL = @INTLTOOL_PERL@ ++INTLTOOL_POLICY_RULE = @INTLTOOL_POLICY_RULE@ ++INTLTOOL_PONG_RULE = @INTLTOOL_PONG_RULE@ ++INTLTOOL_PROP_RULE = @INTLTOOL_PROP_RULE@ ++INTLTOOL_SCHEMAS_RULE = @INTLTOOL_SCHEMAS_RULE@ ++INTLTOOL_SERVER_RULE = @INTLTOOL_SERVER_RULE@ ++INTLTOOL_SERVICE_RULE = @INTLTOOL_SERVICE_RULE@ ++INTLTOOL_SHEET_RULE = @INTLTOOL_SHEET_RULE@ ++INTLTOOL_SOUNDLIST_RULE = @INTLTOOL_SOUNDLIST_RULE@ ++INTLTOOL_THEME_RULE = @INTLTOOL_THEME_RULE@ ++INTLTOOL_UI_RULE = @INTLTOOL_UI_RULE@ + INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ ++INTLTOOL_XAM_RULE = @INTLTOOL_XAM_RULE@ ++INTLTOOL_XML_NOMERGE_RULE = @INTLTOOL_XML_NOMERGE_RULE@ ++INTLTOOL_XML_RULE = @INTLTOOL_XML_RULE@ ++LD = @LD@ + LDFLAGS = @LDFLAGS@ + LIBOBJS = @LIBOBJS@ + LIBS = @LIBS@ + LIBTOOL = @LIBTOOL@ ++LIPO = @LIPO@ + LN_S = @LN_S@ + LTLIBOBJS = @LTLIBOBJS@ + MAINT = @MAINT@ +@@ -164,8 +180,11 @@ + MSGFMT = @MSGFMT@ + MSGFMT_OPTS = @MSGFMT_OPTS@ + MSGMERGE = @MSGMERGE@ ++NM = @NM@ + NMEDIT = @NMEDIT@ + OBJEXT = @OBJEXT@ ++OTOOL = @OTOOL@ ++OTOOL64 = @OTOOL64@ + PACKAGE = @PACKAGE@ + PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ + PACKAGE_NAME = @PACKAGE_NAME@ +@@ -213,8 +232,7 @@ + abs_top_builddir = @abs_top_builddir@ + abs_top_srcdir = @abs_top_srcdir@ + ac_ct_CC = @ac_ct_CC@ +-ac_ct_CXX = @ac_ct_CXX@ +-ac_ct_F77 = @ac_ct_F77@ ++ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ + am__include = @am__include@ + am__leading_dot = @am__leading_dot@ + am__quote = @am__quote@ +@@ -245,6 +263,7 @@ + libexecdir = @libexecdir@ + localedir = @localedir@ + localstatedir = @localstatedir@ ++lt_ECHO = @lt_ECHO@ + mandir = @mandir@ + mkdir_p = @mkdir_p@ + oldincludedir = @oldincludedir@ +@@ -257,7 +276,6 @@ + srcdir = @srcdir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ +-top_build_prefix = @top_build_prefix@ + top_builddir = @top_builddir@ + top_srcdir = @top_srcdir@ + NULL = +Index: gnome-session-2.25.90/tools/Makefile.in +=================================================================== +--- gnome-session-2.25.90.orig/tools/Makefile.in 2009-02-04 18:29:32.000000000 +0000 ++++ gnome-session-2.25.90/tools/Makefile.in 2009-02-04 18:30:00.000000000 +0000 +@@ -87,10 +87,6 @@ + COMPAT_LIBS = @COMPAT_LIBS@ + CPP = @CPP@ + CPPFLAGS = @CPPFLAGS@ +-CXX = @CXX@ +-CXXCPP = @CXXCPP@ +-CXXDEPMODE = @CXXDEPMODE@ +-CXXFLAGS = @CXXFLAGS@ + CYGPATH_W = @CYGPATH_W@ + DATADIRNAME = @DATADIRNAME@ + DBUS_GLIB_CFLAGS = @DBUS_GLIB_CFLAGS@ +@@ -100,7 +96,7 @@ + DISABLE_DEPRECATED = @DISABLE_DEPRECATED@ + DISABLE_DEPRECATED_CFLAGS = @DISABLE_DEPRECATED_CFLAGS@ + DSYMUTIL = @DSYMUTIL@ +-ECHO = @ECHO@ ++DUMPBIN = @DUMPBIN@ + ECHO_C = @ECHO_C@ + ECHO_N = @ECHO_N@ + ECHO_T = @ECHO_T@ +@@ -108,8 +104,7 @@ + EGG_SMCLIENT_LIBS = @EGG_SMCLIENT_LIBS@ + EGREP = @EGREP@ + EXEEXT = @EXEEXT@ +-F77 = @F77@ +-FFLAGS = @FFLAGS@ ++FGREP = @FGREP@ + GCONFTOOL = @GCONFTOOL@ + GCONF_CFLAGS = @GCONF_CFLAGS@ + GCONF_LIBS = @GCONF_LIBS@ +@@ -134,14 +129,35 @@ + INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ + INSTOBJEXT = @INSTOBJEXT@ + INTLLIBS = @INTLLIBS@ ++INTLTOOL_CAVES_RULE = @INTLTOOL_CAVES_RULE@ ++INTLTOOL_DESKTOP_RULE = @INTLTOOL_DESKTOP_RULE@ ++INTLTOOL_DIRECTORY_RULE = @INTLTOOL_DIRECTORY_RULE@ + INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ ++INTLTOOL_KBD_RULE = @INTLTOOL_KBD_RULE@ ++INTLTOOL_KEYS_RULE = @INTLTOOL_KEYS_RULE@ + INTLTOOL_MERGE = @INTLTOOL_MERGE@ ++INTLTOOL_OAF_RULE = @INTLTOOL_OAF_RULE@ + INTLTOOL_PERL = @INTLTOOL_PERL@ ++INTLTOOL_POLICY_RULE = @INTLTOOL_POLICY_RULE@ ++INTLTOOL_PONG_RULE = @INTLTOOL_PONG_RULE@ ++INTLTOOL_PROP_RULE = @INTLTOOL_PROP_RULE@ ++INTLTOOL_SCHEMAS_RULE = @INTLTOOL_SCHEMAS_RULE@ ++INTLTOOL_SERVER_RULE = @INTLTOOL_SERVER_RULE@ ++INTLTOOL_SERVICE_RULE = @INTLTOOL_SERVICE_RULE@ ++INTLTOOL_SHEET_RULE = @INTLTOOL_SHEET_RULE@ ++INTLTOOL_SOUNDLIST_RULE = @INTLTOOL_SOUNDLIST_RULE@ ++INTLTOOL_THEME_RULE = @INTLTOOL_THEME_RULE@ ++INTLTOOL_UI_RULE = @INTLTOOL_UI_RULE@ + INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ ++INTLTOOL_XAM_RULE = @INTLTOOL_XAM_RULE@ ++INTLTOOL_XML_NOMERGE_RULE = @INTLTOOL_XML_NOMERGE_RULE@ ++INTLTOOL_XML_RULE = @INTLTOOL_XML_RULE@ ++LD = @LD@ + LDFLAGS = @LDFLAGS@ + LIBOBJS = @LIBOBJS@ + LIBS = @LIBS@ + LIBTOOL = @LIBTOOL@ ++LIPO = @LIPO@ + LN_S = @LN_S@ + LTLIBOBJS = @LTLIBOBJS@ + MAINT = @MAINT@ +@@ -151,8 +167,11 @@ + MSGFMT = @MSGFMT@ + MSGFMT_OPTS = @MSGFMT_OPTS@ + MSGMERGE = @MSGMERGE@ ++NM = @NM@ + NMEDIT = @NMEDIT@ + OBJEXT = @OBJEXT@ ++OTOOL = @OTOOL@ ++OTOOL64 = @OTOOL64@ + PACKAGE = @PACKAGE@ + PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ + PACKAGE_NAME = @PACKAGE_NAME@ +@@ -200,8 +219,7 @@ + abs_top_builddir = @abs_top_builddir@ + abs_top_srcdir = @abs_top_srcdir@ + ac_ct_CC = @ac_ct_CC@ +-ac_ct_CXX = @ac_ct_CXX@ +-ac_ct_F77 = @ac_ct_F77@ ++ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ + am__include = @am__include@ + am__leading_dot = @am__leading_dot@ + am__quote = @am__quote@ +@@ -232,6 +250,7 @@ + libexecdir = @libexecdir@ + localedir = @localedir@ + localstatedir = @localstatedir@ ++lt_ECHO = @lt_ECHO@ + mandir = @mandir@ + mkdir_p = @mkdir_p@ + oldincludedir = @oldincludedir@ +@@ -244,7 +263,6 @@ + srcdir = @srcdir@ + sysconfdir = @sysconfdir@ + target_alias = @target_alias@ +-top_build_prefix = @top_build_prefix@ + top_builddir = @top_builddir@ + top_srcdir = @top_srcdir@ + INCLUDES = \