[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.38-8-generic (buildd@allspice) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu3) ) #42-Ubuntu SMP Mon Apr 11 03:31:24 UTC 2011 (Ubuntu 2.6.38-8.42-generic 2.6.38.2) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-2.6.38-8-generic root=UUID=f15d2979-df94-42e9-b07a-b9491ae15629 ro quiet splash vt.handoff=7 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007ffb0000 (usable) [ 0.000000] BIOS-e820: 000000007ffb0000 - 000000007ffbe000 (ACPI data) [ 0.000000] BIOS-e820: 000000007ffbe000 - 0000000080000000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI present. [ 0.000000] DMI: MICRO-STAR INTERNATIONAL CO.,LTD MS-7388/MS-7388, BIOS V1.13 09/20/2010 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x7ffb0 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF80000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-000000007ffb0000 [ 0.000000] 0000000000 - 007fe00000 page 2M [ 0.000000] 007fe00000 - 007ffb0000 page 4k [ 0.000000] kernel direct mapping tables up to 7ffb0000 @ 1fffc000-20000000 [ 0.000000] RAMDISK: 366de000 - 37367000 [ 0.000000] ACPI: RSDP 00000000000faaf0 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 000000007ffb0000 00040 (v01 092010 RSDT1612 20100920 MSFT 00000097) [ 0.000000] ACPI: FACP 000000007ffb0200 00084 (v02 092010 FACP1612 20100920 MSFT 00000097) [ 0.000000] ACPI: DSDT 000000007ffb05d0 0728E (v01 1ADSL 1ADSL000 00000000 INTL 20051117) [ 0.000000] ACPI: FACS 000000007ffbe000 00040 [ 0.000000] ACPI: APIC 000000007ffb0390 0007C (v01 092010 APIC1612 20100920 MSFT 00000097) [ 0.000000] ACPI: MCFG 000000007ffb0410 0003C (v01 092010 OEMMCFG 20100920 MSFT 00000097) [ 0.000000] ACPI: OEMB 000000007ffbe040 00071 (v01 092010 OEMB1612 20100920 MSFT 00000097) [ 0.000000] ACPI: SRAT 000000007ffb7860 000A0 (v03 AMD FAM_F_10 00000002 AMD 00000001) [ 0.000000] ACPI: EPTH 000000007ffb7900 00038 (v01 092010 OEMHPET 20100920 MSFT 00000097) [ 0.000000] ACPI: SSDT 000000007ffb7940 00350 (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0 [ 0.000000] SRAT: Node 0 PXM 0 0-a0000 [ 0.000000] SRAT: Node 0 PXM 0 100000-80000000 [ 0.000000] SRAT: Node 0 [0,a0000) + [100000,80000000) -> [0,80000000) [ 0.000000] NUMA: Using 63 for the hash shift. [ 0.000000] Initmem setup node 0 0000000000000000-000000007ffb0000 [ 0.000000] NODE_DATA [000000007ffab000 - 000000007ffaffff] [ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff88007d600000-ffff88007f1fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal empty [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0007ffb0 [ 0.000000] On node 0 totalpages: 524095 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 6 pages reserved [ 0.000000] DMA zone: 3921 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7111 pages used for memmap [ 0.000000] DMA32 zone: 513001 pages, LIFO batch:31 [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 6 CPUs, 4 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000 [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7ff00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:6 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88007fc00000 s84416 r8192 d22080 u262144 [ 0.000000] pcpu-alloc: s84416 r8192 d22080 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - - [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 516922 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.38-8-generic root=UUID=f15d2979-df94-42e9-b07a-b9491ae15629 ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ fc7a000000 size 32 MB [ 0.000000] Aperture beyond 4GB. Ignoring. [ 0.000000] Memory: 2040732k/2096832k available (5940k kernel code, 452k absent, 55648k reserved, 5017k data, 956k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] NR_IRQS:16640 nr_irqs:728 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 20971520 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 3100.662 MHz processor. [ 0.000000] Marking TSC unstable due to TSCs unsynchronized [ 0.020005] Calibrating delay loop (skipped), value calculated using timer frequency.. 6201.32 BogoMIPS (lpj=31006620) [ 0.020009] pid_max: default: 32768 minimum: 301 [ 0.020033] Security Framework initialized [ 0.020050] AppArmor: AppArmor initialized [ 0.020051] Yama: becoming mindful. [ 0.020253] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.021265] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.021710] Mount-cache hash table entries: 256 [ 0.021838] Initializing cgroup subsys ns [ 0.021841] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup. [ 0.021844] Initializing cgroup subsys cpuacct [ 0.021848] Initializing cgroup subsys memory [ 0.021857] Initializing cgroup subsys devices [ 0.021859] Initializing cgroup subsys freezer [ 0.021860] Initializing cgroup subsys net_cls [ 0.021862] Initializing cgroup subsys blkio [ 0.021891] tseg: 0000000000 [ 0.021904] CPU: Physical Processor ID: 0 [ 0.021905] CPU: Processor Core ID: 0 [ 0.021907] mce: CPU supports 5 MCE banks [ 0.021917] using C1E aware idle routine [ 0.023099] ACPI: Core revision 20110112 [ 0.025556] ftrace: allocating 24314 entries in 96 pages [ 0.030089] Setting APIC routing to flat [ 0.030400] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.131962] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ stepping 02 [ 0.140000] Performance Events: AMD PMU driver. [ 0.140000] ... version: 0 [ 0.140000] ... bit width: 48 [ 0.140000] ... generic registers: 4 [ 0.140000] ... value mask: 0000ffffffffffff [ 0.140000] ... max period: 00007fffffffffff [ 0.140000] ... fixed-purpose events: 0 [ 0.140000] ... event mask: 000000000000000f [ 0.140000] Booting Node 0, Processors #1 [ 0.290044] Brought up 2 CPUs [ 0.290046] Total of 2 processors activated (12401.89 BogoMIPS). [ 0.290222] devtmpfs: initialized [ 0.290796] print_constraints: dummy: [ 0.290823] Time: 18:05:34 Date: 04/23/11 [ 0.290859] NET: Registered protocol family 16 [ 0.290895] Trying to unpack rootfs image as initramfs... [ 0.290972] node 0 link 0: io port [1000, ffffff] [ 0.290975] TOM: 0000000080000000 aka 2048M [ 0.290978] node 0 link 0: mmio [e0000000, efffffff] [ 0.290980] node 0 link 0: mmio [f0000000, ffffffff] [ 0.290982] node 0 link 0: mmio [a0000, bffff] [ 0.290984] node 0 link 0: mmio [80000000, dfffffff] [ 0.290986] bus: [00, 07] on node 0 link 0 [ 0.290989] bus: 00 index 0 [io 0x0000-0xffff] [ 0.290990] bus: 00 index 1 [mem 0x80000000-0xfcffffffff] [ 0.290992] bus: 00 index 2 [mem 0x000a0000-0x000bffff] [ 0.291007] ACPI: bus type pci registered [ 0.291068] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.291071] PCI: not using MMCONFIG [ 0.291072] PCI: Using configuration type 1 for base access [ 0.291719] bio: create slab at 0 [ 0.292475] ACPI: EC: Look up EC in DSDT [ 0.293187] ACPI: Executed 3 blocks of module-level executable AML code [ 0.350187] ACPI: Interpreter enabled [ 0.350190] ACPI: (supports S0 S3 S4 S5) [ 0.350207] ACPI: Using IOAPIC for interrupt routing [ 0.350232] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.350647] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.470085] ACPI: No dock devices found. [ 0.470087] HEST: Table not found. [ 0.470090] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.470174] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.470335] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] [ 0.470337] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] [ 0.470339] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.470341] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] [ 0.470343] pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xdfffffff] [ 0.470345] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfed44fff] [ 0.470361] pci 0000:00:00.0: [1002:5957] type 0 class 0x000600 [ 0.470375] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit] [ 0.470413] pci 0000:00:02.0: [1002:5978] type 1 class 0x000604 [ 0.470445] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.470448] pci 0000:00:02.0: PME# disabled [ 0.470468] pci 0000:00:06.0: [1002:597c] type 1 class 0x000604 [ 0.470499] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.470501] pci 0000:00:06.0: PME# disabled [ 0.470536] pci 0000:00:12.0: [1002:4380] type 0 class 0x000101 [ 0.470555] pci 0000:00:12.0: reg 10: [io 0xc000-0xc007] [ 0.470566] pci 0000:00:12.0: reg 14: [io 0xb000-0xb003] [ 0.470576] pci 0000:00:12.0: reg 18: [io 0xa000-0xa007] [ 0.470587] pci 0000:00:12.0: reg 1c: [io 0x9000-0x9003] [ 0.470598] pci 0000:00:12.0: reg 20: [io 0x8000-0x800f] [ 0.470609] pci 0000:00:12.0: reg 24: [mem 0xfe9ff800-0xfe9ffbff] [ 0.470631] pci 0000:00:12.0: set SATA to AHCI mode [ 0.470662] pci 0000:00:13.0: [1002:4387] type 0 class 0x000c03 [ 0.470677] pci 0000:00:13.0: reg 10: [mem 0xfe9fa000-0xfe9fafff] [ 0.470752] pci 0000:00:13.1: [1002:4388] type 0 class 0x000c03 [ 0.470767] pci 0000:00:13.1: reg 10: [mem 0xfe9fb000-0xfe9fbfff] [ 0.470840] pci 0000:00:13.2: [1002:4389] type 0 class 0x000c03 [ 0.470855] pci 0000:00:13.2: reg 10: [mem 0xfe9fc000-0xfe9fcfff] [ 0.470927] pci 0000:00:13.3: [1002:438a] type 0 class 0x000c03 [ 0.470942] pci 0000:00:13.3: reg 10: [mem 0xfe9fd000-0xfe9fdfff] [ 0.471014] pci 0000:00:13.4: [1002:438b] type 0 class 0x000c03 [ 0.471029] pci 0000:00:13.4: reg 10: [mem 0xfe9fe000-0xfe9fefff] [ 0.471107] pci 0000:00:13.5: [1002:4386] type 0 class 0x000c03 [ 0.471129] pci 0000:00:13.5: reg 10: [mem 0xfe9ff000-0xfe9ff0ff] [ 0.471208] pci 0000:00:13.5: supports D1 D2 [ 0.471210] pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot [ 0.471214] pci 0000:00:13.5: PME# disabled [ 0.471238] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05 [ 0.471263] pci 0000:00:14.0: reg 10: [io 0x0b00-0x0b0f] [ 0.471348] pci 0000:00:14.1: [1002:438c] type 0 class 0x000101 [ 0.471362] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007] [ 0.471373] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003] [ 0.471383] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007] [ 0.471394] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003] [ 0.471405] pci 0000:00:14.1: reg 20: [io 0xff00-0xff0f] [ 0.471446] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403 [ 0.471470] pci 0000:00:14.2: reg 10: [mem 0xfe9f4000-0xfe9f7fff 64bit] [ 0.471535] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.471539] pci 0000:00:14.2: PME# disabled [ 0.471558] pci 0000:00:14.3: [1002:438d] type 0 class 0x000601 [ 0.471641] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604 [ 0.471692] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600 [ 0.471710] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600 [ 0.471726] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600 [ 0.471742] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600 [ 0.471806] pci 0000:01:00.0: [1002:9501] type 0 class 0x000300 [ 0.471821] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.471832] pci 0000:01:00.0: reg 18: [mem 0xfeae0000-0xfeaeffff 64bit] [ 0.471840] pci 0000:01:00.0: reg 20: [io 0xd000-0xd0ff] [ 0.471854] pci 0000:01:00.0: reg 30: [mem 0xfeac0000-0xfeadffff pref] [ 0.471873] pci 0000:01:00.0: supports D1 D2 [ 0.471895] pci 0000:01:00.1: [1002:aa18] type 0 class 0x000403 [ 0.471909] pci 0000:01:00.1: reg 10: [mem 0xfeafc000-0xfeafffff 64bit] [ 0.471958] pci 0000:01:00.1: supports D1 D2 [ 0.490011] pci 0000:00:02.0: PCI bridge to [bus 01-01] [ 0.490016] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff] [ 0.490018] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.490023] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.490072] pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200 [ 0.490088] pci 0000:02:00.0: reg 10: [io 0xe800-0xe8ff] [ 0.490114] pci 0000:02:00.0: reg 18: [mem 0xfebff000-0xfebfffff 64bit] [ 0.490144] pci 0000:02:00.0: reg 30: [mem 0xfebc0000-0xfebdffff pref] [ 0.490183] pci 0000:02:00.0: supports D1 D2 [ 0.490185] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.490189] pci 0000:02:00.0: PME# disabled [ 0.490209] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.490217] pci 0000:00:06.0: PCI bridge to [bus 02-02] [ 0.490220] pci 0000:00:06.0: bridge window [io 0xe000-0xefff] [ 0.490223] pci 0000:00:06.0: bridge window [mem 0xfeb00000-0xfebfffff] [ 0.490227] pci 0000:00:06.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.490255] pci 0000:03:03.0: [109e:0350] type 0 class 0x000400 [ 0.490273] pci 0000:03:03.0: reg 10: [mem 0xfdfff000-0xfdffffff pref] [ 0.490403] pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode) [ 0.490407] pci 0000:00:14.4: bridge window [io 0xf000-0x0000] (disabled) [ 0.490412] pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 0.490416] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfdffffff pref] [ 0.490419] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.490421] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.490423] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.490425] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) [ 0.490427] pci 0000:00:14.4: bridge window [mem 0x80000000-0xdfffffff] (subtractive decode) [ 0.490429] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfed44fff] (subtractive decode) [ 0.490443] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.490680] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT] [ 0.490760] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT] [ 0.490796] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT] [ 0.490833] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.494616] ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 7 10 11 12 14 15) [ 0.494658] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 *15) [ 0.494663] Freeing initrd memory: 12836k freed [ 0.494699] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *10 11 12 14 15) [ 0.494740] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 10 11 12 14 15) [ 0.494777] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.494816] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 *7 10 11 12 14 15) [ 0.494855] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 10 *11 12 14 15) [ 0.494892] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.495046] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.495049] vgaarb: loaded [ 0.495267] SCSI subsystem initialized [ 0.495380] libata version 3.00 loaded. [ 0.495433] usbcore: registered new interface driver usbfs [ 0.495444] usbcore: registered new interface driver hub [ 0.495478] usbcore: registered new device driver usb [ 0.495685] wmi: Mapper loaded [ 0.495687] PCI: Using ACPI for IRQ routing [ 0.495690] PCI: pci_cache_line_size set to 64 bytes [ 0.495702] pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit] [ 0.495801] reserve RAM buffer: 000000000009fc00 - 000000000009ffff [ 0.495804] reserve RAM buffer: 000000007ffb0000 - 000000007fffffff [ 0.495931] NetLabel: Initializing [ 0.495932] NetLabel: domain hash size = 128 [ 0.495933] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.495952] NetLabel: unlabeled traffic allowed by default [ 0.504033] AppArmor: AppArmor Filesystem Enabled [ 0.504067] pnp: PnP ACPI init [ 0.504089] ACPI: bus type pnp registered [ 0.504205] pnp 00:00: [bus 00-ff] [ 0.504207] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.504209] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.504211] pnp 00:00: [io 0x0d00-0xffff window] [ 0.504213] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.504215] pnp 00:00: [mem 0x000d0000-0x000dffff window] [ 0.504216] pnp 00:00: [mem 0x80000000-0xdfffffff window] [ 0.504219] pnp 00:00: [mem 0xf0000000-0xfed44fff window] [ 0.504280] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.504308] pnp 00:01: [dma 4] [ 0.504310] pnp 00:01: [io 0x0000-0x000f] [ 0.504312] pnp 00:01: [io 0x0081-0x0083] [ 0.504313] pnp 00:01: [io 0x0087] [ 0.504315] pnp 00:01: [io 0x0089-0x008b] [ 0.504316] pnp 00:01: [io 0x008f] [ 0.504318] pnp 00:01: [io 0x00c0-0x00df] [ 0.504342] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.504351] pnp 00:02: [io 0x0070-0x0071] [ 0.504362] pnp 00:02: [irq 8] [ 0.504388] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.504395] pnp 00:03: [io 0x0061] [ 0.504418] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.504427] pnp 00:04: [io 0x00f0-0x00ff] [ 0.504432] pnp 00:04: [irq 13] [ 0.504458] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.504704] pnp 00:05: [mem 0xfec00000-0xfec00fff] [ 0.504706] pnp 00:05: [mem 0xfee00000-0xfee00fff] [ 0.504764] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.504766] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.504769] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.504852] pnp 00:06: [io 0x0010-0x001f] [ 0.504854] pnp 00:06: [io 0x0022-0x002c] [ 0.504855] pnp 00:06: [io 0x0030-0x0040] [ 0.504857] pnp 00:06: [io 0x0062-0x0063] [ 0.504859] pnp 00:06: [io 0x0065-0x006f] [ 0.504860] pnp 00:06: [io 0x0072-0x007f] [ 0.504862] pnp 00:06: [io 0x0080] [ 0.504863] pnp 00:06: [io 0x0084-0x0086] [ 0.504864] pnp 00:06: [io 0x0088] [ 0.504866] pnp 00:06: [io 0x008c-0x008e] [ 0.504868] pnp 00:06: [io 0x0090-0x009f] [ 0.504869] pnp 00:06: [io 0x00a2-0x00bf] [ 0.504871] pnp 00:06: [io 0x00b1] [ 0.504872] pnp 00:06: [io 0x00e0-0x00ef] [ 0.504874] pnp 00:06: [io 0x04d0-0x04d1] [ 0.504875] pnp 00:06: [io 0x040b] [ 0.504877] pnp 00:06: [io 0x04d6] [ 0.504878] pnp 00:06: [io 0x0c00-0x0c01] [ 0.504880] pnp 00:06: [io 0x0c14] [ 0.504881] pnp 00:06: [io 0x0c50-0x0c51] [ 0.504883] pnp 00:06: [io 0x0c52] [ 0.504884] pnp 00:06: [io 0x0c6c] [ 0.504885] pnp 00:06: [io 0x0c6f] [ 0.504887] pnp 00:06: [io 0x0cd0-0x0cd1] [ 0.504889] pnp 00:06: [io 0x0cd2-0x0cd3] [ 0.504890] pnp 00:06: [io 0x0cd4-0x0cd5] [ 0.504892] pnp 00:06: [io 0x0cd6-0x0cd7] [ 0.504893] pnp 00:06: [io 0x0cd8-0x0cdf] [ 0.504897] pnp 00:06: [io 0x0800-0x089f] [ 0.504899] pnp 00:06: [io 0x0b10-0x0b1f] [ 0.504901] pnp 00:06: [io 0x0000-0xffffffffffffffff disabled] [ 0.504903] pnp 00:06: [io 0x0900-0x090f] [ 0.504904] pnp 00:06: [io 0x0910-0x091f] [ 0.504906] pnp 00:06: [io 0xfe00-0xfefe] [ 0.504907] pnp 00:06: [mem 0xffb80000-0xffbfffff] [ 0.504909] pnp 00:06: [mem 0xfff00000-0xffffffff] [ 0.504984] system 00:06: [io 0x04d0-0x04d1] has been reserved [ 0.504986] system 00:06: [io 0x040b] has been reserved [ 0.504988] system 00:06: [io 0x04d6] has been reserved [ 0.504990] system 00:06: [io 0x0c00-0x0c01] has been reserved [ 0.504993] system 00:06: [io 0x0c14] has been reserved [ 0.504995] system 00:06: [io 0x0c50-0x0c51] has been reserved [ 0.504997] system 00:06: [io 0x0c52] has been reserved [ 0.504999] system 00:06: [io 0x0c6c] has been reserved [ 0.505001] system 00:06: [io 0x0c6f] has been reserved [ 0.505003] system 00:06: [io 0x0cd0-0x0cd1] has been reserved [ 0.505006] system 00:06: [io 0x0cd2-0x0cd3] has been reserved [ 0.505008] system 00:06: [io 0x0cd4-0x0cd5] has been reserved [ 0.505010] system 00:06: [io 0x0cd6-0x0cd7] has been reserved [ 0.505012] system 00:06: [io 0x0cd8-0x0cdf] has been reserved [ 0.505015] system 00:06: [io 0x0800-0x089f] has been reserved [ 0.505017] system 00:06: [io 0x0b10-0x0b1f] has been reserved [ 0.505019] system 00:06: [io 0x0900-0x090f] has been reserved [ 0.505021] system 00:06: [io 0x0910-0x091f] has been reserved [ 0.505024] system 00:06: [io 0xfe00-0xfefe] has been reserved [ 0.505027] system 00:06: [mem 0xffb80000-0xffbfffff] has been reserved [ 0.505029] system 00:06: [mem 0xfff00000-0xffffffff] has been reserved [ 0.505032] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.505055] pnp 00:07: [io 0x0060] [ 0.505057] pnp 00:07: [io 0x0064] [ 0.505061] pnp 00:07: [irq 1] [ 0.505085] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.505173] pnp 00:08: [io 0x0000-0xffffffffffffffff disabled] [ 0.505175] pnp 00:08: [io 0x0600-0x06df] [ 0.505177] pnp 00:08: [io 0x0ae0-0x0aef] [ 0.505221] system 00:08: [io 0x0600-0x06df] has been reserved [ 0.505224] system 00:08: [io 0x0ae0-0x0aef] has been reserved [ 0.505226] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.505266] pnp 00:09: [mem 0xe0000000-0xefffffff] [ 0.505307] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved [ 0.505309] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.505475] pnp 00:0a: [mem 0x00000000-0x0009ffff] [ 0.505477] pnp 00:0a: [mem 0x000c0000-0x000cffff] [ 0.505479] pnp 00:0a: [mem 0x000e0000-0x000fffff] [ 0.505480] pnp 00:0a: [mem 0x00100000-0x7fffffff] [ 0.505482] pnp 00:0a: [mem 0xfed45000-0xffffffff] [ 0.505486] pnp 00:0a: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.505489] pnp 00:0a: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.505492] pnp 00:0a: disabling [mem 0x000e0000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.505495] pnp 00:0a: disabling [mem 0x00100000-0x7fffffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] [ 0.505550] system 00:0a: [mem 0xfed45000-0xffffffff] could not be reserved [ 0.505552] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.505647] pnp: PnP ACPI: found 11 devices [ 0.505648] ACPI: ACPI bus type pnp unregistered [ 0.511727] Switching to clocksource acpi_pm [ 0.511781] pci 0000:00:02.0: PCI bridge to [bus 01-01] [ 0.511784] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff] [ 0.511787] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.511791] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.511795] pci 0000:00:06.0: PCI bridge to [bus 02-02] [ 0.511797] pci 0000:00:06.0: bridge window [io 0xe000-0xefff] [ 0.511800] pci 0000:00:06.0: bridge window [mem 0xfeb00000-0xfebfffff] [ 0.511803] pci 0000:00:06.0: bridge window [mem pref disabled] [ 0.511807] pci 0000:00:14.4: PCI bridge to [bus 03-03] [ 0.511809] pci 0000:00:14.4: bridge window [io disabled] [ 0.511814] pci 0000:00:14.4: bridge window [mem disabled] [ 0.511818] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfdffffff pref] [ 0.511840] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.511844] pci 0000:00:02.0: setting latency timer to 64 [ 0.511850] pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.511852] pci 0000:00:06.0: setting latency timer to 64 [ 0.511860] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.511862] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.511864] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.511866] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] [ 0.511868] pci_bus 0000:00: resource 8 [mem 0x80000000-0xdfffffff] [ 0.511870] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed44fff] [ 0.511872] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] [ 0.511874] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff] [ 0.511876] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.511878] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.511880] pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff] [ 0.511882] pci_bus 0000:03: resource 2 [mem 0xfdf00000-0xfdffffff pref] [ 0.511884] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7] [ 0.511886] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff] [ 0.511888] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff] [ 0.511890] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff] [ 0.511892] pci_bus 0000:03: resource 8 [mem 0x80000000-0xdfffffff] [ 0.511894] pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfed44fff] [ 0.511927] NET: Registered protocol family 2 [ 0.512028] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.512777] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.514501] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.514960] TCP: Hash tables configured (established 262144 bind 65536) [ 0.514963] TCP reno registered [ 0.514973] UDP hash table entries: 1024 (order: 3, 32768 bytes) [ 0.514997] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [ 0.515119] NET: Registered protocol family 1 [ 0.523859] Switched to NOHz mode on CPU #1 [ 0.523861] Switched to NOHz mode on CPU #0 [ 0.660056] pci 0000:01:00.0: Boot video device [ 0.660066] PCI: CLS 64 bytes, default 64 [ 0.661558] audit: initializing netlink socket (disabled) [ 0.661578] type=2000 audit(1303581933.659:1): initialized [ 0.672374] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.673909] VFS: Disk quotas dquot_6.5.2 [ 0.673968] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.674521] fuse init (API version 7.16) [ 0.674605] msgmni has been set to 4010 [ 0.674898] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.674936] io scheduler noop registered [ 0.674938] io scheduler deadline registered [ 0.674976] io scheduler cfq registered (default) [ 0.675113] pcieport 0000:00:02.0: setting latency timer to 64 [ 0.675148] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X [ 0.675239] pcieport 0000:00:06.0: setting latency timer to 64 [ 0.675265] pcieport 0000:00:06.0: irq 41 for MSI/MSI-X [ 0.675331] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.675349] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.675473] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.740022] ACPI: Power Button [PWRB] [ 0.740062] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.740066] ACPI: Power Button [PWRF] [ 0.740222] ACPI: acpi_idle registered with cpuidle [ 0.740237] ACPI: duty_cycle spans bit 4 [ 0.741241] ERST: Table is not found! [ 0.741310] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.070263] Linux agpgart interface v0.103 [ 1.071291] brd: module loaded [ 1.071765] loop: module loaded [ 1.071860] i2c-core: driver [adp5520] using legacy suspend method [ 1.071861] i2c-core: driver [adp5520] using legacy resume method [ 1.072068] pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.072103] pata_acpi 0000:00:14.1: setting latency timer to 64 [ 1.072469] Fixed MDIO Bus: probed [ 1.072495] PPP generic driver version 2.4.2 [ 1.072534] tun: Universal TUN/TAP device driver, 1.6 [ 1.072536] tun: (C) 1999-2004 Max Krasnyansky [ 1.072612] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.072661] ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 1.072678] ehci_hcd 0000:00:13.5: EHCI Host Controller [ 1.072731] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1 [ 1.100045] ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround [ 1.100060] ehci_hcd 0000:00:13.5: debug port 1 [ 1.100082] ehci_hcd 0000:00:13.5: irq 19, io mem 0xfe9ff000 [ 1.120024] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00 [ 1.120129] hub 1-0:1.0: USB hub found [ 1.120133] hub 1-0:1.0: 10 ports detected [ 1.120237] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.120280] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.120291] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 1.120330] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 [ 1.120370] ohci_hcd 0000:00:13.0: irq 16, io mem 0xfe9fa000 [ 1.184116] hub 2-0:1.0: USB hub found [ 1.184122] hub 2-0:1.0: 2 ports detected [ 1.184236] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.184246] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 1.184286] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 [ 1.220072] ohci_hcd 0000:00:13.1: irq 17, io mem 0xfe9fb000 [ 1.284122] hub 3-0:1.0: USB hub found [ 1.284128] hub 3-0:1.0: 2 ports detected [ 1.284237] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.284246] ohci_hcd 0000:00:13.2: OHCI Host Controller [ 1.284290] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4 [ 1.290071] ohci_hcd 0000:00:13.2: irq 18, io mem 0xfe9fc000 [ 1.354113] hub 4-0:1.0: USB hub found [ 1.354119] hub 4-0:1.0: 2 ports detected [ 1.354238] ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.354248] ohci_hcd 0000:00:13.3: OHCI Host Controller [ 1.354284] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5 [ 1.360040] ohci_hcd 0000:00:13.3: irq 17, io mem 0xfe9fd000 [ 1.424118] hub 5-0:1.0: USB hub found [ 1.424124] hub 5-0:1.0: 2 ports detected [ 1.424232] ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.424244] ohci_hcd 0000:00:13.4: OHCI Host Controller [ 1.424281] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6 [ 1.424314] ohci_hcd 0000:00:13.4: irq 18, io mem 0xfe9fe000 [ 1.484113] hub 6-0:1.0: USB hub found [ 1.484119] hub 6-0:1.0: 2 ports detected [ 1.484196] uhci_hcd: USB Universal Host Controller Interface driver [ 1.509564] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 1.509566] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 1.510294] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.510360] mousedev: PS/2 mouse device common for all mice [ 1.510462] rtc_cmos 00:02: RTC can wake from S4 [ 1.538850] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 1.550059] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 1.550083] rtc0: alarms up to one month, y3k, 114 bytes nvram [ 1.550165] device-mapper: uevent: version 1.0.3 [ 1.550235] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com [ 1.550321] device-mapper: multipath: version 1.2.0 loaded [ 1.550323] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1.550448] cpuidle: using governor ladder [ 1.550449] cpuidle: using governor menu [ 1.550686] TCP cubic registered [ 1.550791] NET: Registered protocol family 10 [ 1.551226] NET: Registered protocol family 17 [ 1.551243] Registering the dns_resolver key type [ 1.551266] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ (2 cpu cores) (version 2.20.00) [ 1.551322] powernow-k8: 0 : fid 0x17 (3100 MHz), vid 0x6 [ 1.551324] powernow-k8: 1 : fid 0x16 (3000 MHz), vid 0x7 [ 1.551325] powernow-k8: 2 : fid 0x14 (2800 MHz), vid 0x9 [ 1.551327] powernow-k8: 3 : fid 0x12 (2600 MHz), vid 0xb [ 1.551329] powernow-k8: 4 : fid 0x10 (2400 MHz), vid 0xd [ 1.551330] powernow-k8: 5 : fid 0xe (2200 MHz), vid 0xf [ 1.551332] powernow-k8: 6 : fid 0xc (2000 MHz), vid 0x11 [ 1.551333] powernow-k8: 7 : fid 0xa (1800 MHz), vid 0x11 [ 1.551335] powernow-k8: 8 : fid 0x2 (1000 MHz), vid 0x12 [ 1.551467] PM: Hibernation image not present or could not be loaded. [ 1.551479] registered taskstats version 1 [ 1.551717] Magic number: 7:139:90 [ 1.551810] rtc_cmos 00:02: setting system clock to 2011-04-23 18:05:35 UTC (1303581935) [ 1.551812] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.551814] EDD information not available. [ 1.553207] Freeing unused kernel memory: 956k freed [ 1.553610] Write protecting the kernel read-only data: 10240k [ 1.554208] Freeing unused kernel memory: 184k freed [ 1.558086] Freeing unused kernel memory: 1444k freed [ 1.578231] <30>udev[96]: starting version 167 [ 1.651298] usb 3-1: new low speed USB device using ohci_hcd and address 2 [ 1.669902] scsi0 : pata_atiixp [ 1.672356] scsi1 : pata_atiixp [ 1.673077] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14 [ 1.673079] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15 [ 1.691596] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.691623] r8169 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.691667] r8169 0000:02:00.0: setting latency timer to 64 [ 1.691731] r8169 0000:02:00.0: irq 42 for MSI/MSI-X [ 1.692138] r8169 0000:02:00.0: eth0: RTL8168b/8111b at 0xffffc9000030c000, 00:21:85:3d:21:2d, XID 18000000 IRQ 42 [ 2.062097] ata1.00: ATA-7: Maxtor 6L160P0, BAJ41G20, max UDMA/133 [ 2.062100] ata1.00: 320173056 sectors, multi 16: LBA48 [ 2.062106] ata1.01: ATAPI: LITE-ON LTR-52246S, 6S0F, max UDMA/33 [ 2.101985] ata1.00: configured for UDMA/100 [ 2.140430] ata1.01: configured for UDMA/33 [ 2.147881] scsi 0:0:0:0: Direct-Access ATA Maxtor 6L160P0 BAJ4 PQ: 0 ANSI: 5 [ 2.148046] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.148072] sd 0:0:0:0: [sda] 320173056 512-byte logical blocks: (163 GB/152 GiB) [ 2.152876] sd 0:0:0:0: [sda] Write Protect is off [ 2.152878] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.159743] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.159747] scsi 0:0:1:0: CD-ROM LITE-ON LTR-52246S 6S0F PQ: 0 ANSI: 5 [ 2.170033] usb 3-2: new low speed USB device using ohci_hcd and address 3 [ 2.182806] sr0: scsi3-mmc drive: 175x/52x writer cd/rw xa/form2 cdda tray [ 2.182809] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.182921] sr 0:0:1:0: Attached scsi CD-ROM sr0 [ 2.182983] sr 0:0:1:0: Attached scsi generic sg1 type 5 [ 2.210765] sda: sda1 < sda5 > [ 2.211038] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.219042] ahci 0000:00:12.0: version 3.0 [ 2.219068] ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 2.219097] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit [ 2.219200] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 2.219203] ahci 0000:00:12.0: flags: ncq sntf ilck led clo pmp pio ccc [ 2.220538] scsi2 : ahci [ 2.220645] scsi3 : ahci [ 2.220710] scsi4 : ahci [ 2.220777] scsi5 : ahci [ 2.220872] ata3: SATA max UDMA/133 abar m1024@0xfe9ff800 port 0xfe9ff900 irq 22 [ 2.220875] ata4: SATA max UDMA/133 abar m1024@0xfe9ff800 port 0xfe9ff980 irq 22 [ 2.220878] ata5: SATA max UDMA/133 abar m1024@0xfe9ff800 port 0xfe9ffa00 irq 22 [ 2.220881] ata6: SATA max UDMA/133 abar m1024@0xfe9ff800 port 0xfe9ffa80 irq 22 [ 2.225128] input: Microsoft SideWinder Joystick as /devices/pci0000:00/0000:00:13.1/usb3/3-1/3-1:1.0/input/input3 [ 2.225221] generic-usb 0003:045E:003C.0001: input,hidraw0: USB HID v1.10 Joystick [Microsoft SideWinder Joystick] on usb-0000:00:13.1-1/input0 [ 2.225238] usbcore: registered new interface driver usbhid [ 2.225240] usbhid: USB HID core driver [ 2.368277] input: PS/2+USB Mouse as /devices/pci0000:00/0000:00:13.1/usb3/3-2/3-2:1.0/input/input4 [ 2.368400] generic-usb 0003:04F3:0210.0002: input,hidraw1: USB HID v1.11 Mouse [PS/2+USB Mouse] on usb-0000:00:13.1-2/input0 [ 2.570039] ata5: SATA link down (SStatus 0 SControl 300) [ 2.770032] ata3: softreset failed (device not ready) [ 2.770037] ata3: applying SB600 PMP SRST workaround and retrying [ 2.770053] ata4: softreset failed (device not ready) [ 2.770056] ata4: applying SB600 PMP SRST workaround and retrying [ 2.770072] ata6: softreset failed (device not ready) [ 2.770075] ata6: applying SB600 PMP SRST workaround and retrying [ 2.970040] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.970065] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.970088] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.970539] ata6.00: ATAPI: TSSTcorp CDDVDW SH-S223F, SB03, max UDMA/100 [ 2.970542] ata6.00: SB600 AHCI: limiting to 255 sectors per cmd [ 2.971248] ata6.00: SB600 AHCI: limiting to 255 sectors per cmd [ 2.971250] ata6.00: configured for UDMA/100 [ 2.976490] ata3.00: ATA-7: SAMSUNG HD322HJ, 1AC01113, max UDMA7 [ 2.976492] ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.976495] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd [ 2.982981] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd [ 2.982982] ata3.00: configured for UDMA/133 [ 2.983108] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD322HJ 1AC0 PQ: 0 ANSI: 5 [ 2.983267] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 2.983321] sd 2:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 2.983361] sd 2:0:0:0: [sdb] Write Protect is off [ 2.983363] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.983380] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.014879] ata4.00: ATA-7: ST3320820AS, 3.AAC, max UDMA/133 [ 3.014882] ata4.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 3.014885] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd [ 3.024092] sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 sdb8 > [ 3.024396] sd 2:0:0:0: [sdb] Attached SCSI disk [ 3.073179] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd [ 3.073181] ata4.00: configured for UDMA/133 [ 3.073288] scsi 3:0:0:0: Direct-Access ATA ST3320820AS 3.AA PQ: 0 ANSI: 5 [ 3.073429] sd 3:0:0:0: Attached scsi generic sg3 type 0 [ 3.073434] sd 3:0:0:0: [sdc] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 3.073522] sd 3:0:0:0: [sdc] Write Protect is off [ 3.073524] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 3.073566] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.073990] scsi 5:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S223F SB03 PQ: 0 ANSI: 5 [ 3.076080] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.076169] sr 5:0:0:0: Attached scsi CD-ROM sr1 [ 3.076240] sr 5:0:0:0: Attached scsi generic sg4 type 5 [ 3.158365] sdc: sdc1 sdc2 < sdc5 sdc6 > [ 3.158654] sd 3:0:0:0: [sdc] Attached SCSI disk [ 3.608231] EXT4-fs (sdb5): INFO: recovery required on readonly filesystem [ 3.608235] EXT4-fs (sdb5): write access will be enabled during recovery [ 3.670416] EXT4-fs (sdb5): orphan cleanup on readonly fs [ 3.670424] EXT4-fs (sdb5): ext4_orphan_cleanup: deleting unreferenced inode 7342796 [ 3.670452] EXT4-fs (sdb5): ext4_orphan_cleanup: deleting unreferenced inode 7342828 [ 3.670494] EXT4-fs (sdb5): 2 orphan inodes deleted [ 3.670495] EXT4-fs (sdb5): recovery complete [ 3.950629] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null) [ 5.096506] Adding 3975164k swap on /dev/sdc1. Priority:-1 extents:1 across:3975164k [ 5.247773] <30>udev[364]: starting version 167 [ 6.021748] type=1400 audit(1303581939.967:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=520 comm="apparmor_parser" [ 6.021766] type=1400 audit(1303581939.967:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=531 comm="apparmor_parser" [ 6.022015] type=1400 audit(1303581939.967:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=520 comm="apparmor_parser" [ 6.022044] type=1400 audit(1303581939.967:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=531 comm="apparmor_parser" [ 6.022185] type=1400 audit(1303581939.967:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=520 comm="apparmor_parser" [ 6.022224] type=1400 audit(1303581939.967:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=531 comm="apparmor_parser" [ 6.036571] MCE: In-kernel MCE decoding enabled. [ 6.056305] EDAC MC: Ver: 2.1.0 Apr 11 2011 [ 6.068807] ACPI: resource piix4_smbus [io 0x0b00-0x0b07] conflicts with ACPI region SOR1 [io 0xb00-0xb0f] [ 6.068811] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 6.084890] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 6.165362] IR NEC protocol handler initialized [ 6.198989] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01 [ 6.199079] SP5100 TCO timer: mmio address 0xfec000f0 already in use [ 6.210950] IR RC5(x) protocol handler initialized [ 6.267588] lp: driver loaded but no devices found [ 6.293693] IR RC6 protocol handler initialized [ 6.295006] EDAC amd64_edac: v3.3.0 [ 6.295709] Linux video capture interface: v2.00 [ 6.296212] EDAC amd64: DRAM ECC disabled. [ 6.296223] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 6.296224] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 6.296225] (Note that use of the override may cause unknown side effects.) [ 6.410648] IR JVC protocol handler initialized [ 6.465851] IR Sony protocol handler initialized [ 6.510981] lirc_dev: IR Remote Control driver registered, major 250 [ 6.524212] IR LIRC bridge handler initialized [ 6.530244] bttv: driver version 0.9.18 loaded [ 6.530248] bttv: using 8 buffers with 2080k (520 pages) each for capture [ 6.530895] bttv: Bt8xx card found (0). [ 6.530923] bttv 0000:03:03.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 6.530935] bttv0: Bt848 (rev 18) at 0000:03:03.0, irq: 21, latency: 64, mmio: 0xfdfff000 [ 6.530955] bttv0: using: Terratec TV/Radio+ [card=47,insmod option] [ 6.530999] bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init] [ 6.531042] bt848 #0 [sw]: Test OK [ 6.531092] bttv0: tuner type=1 [ 6.610123] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 6.610128] Disabling lock debugging due to kernel taint [ 6.681375] [fglrx] Maximum main memory to use for locked dma buffers: 1880 MBytes. [ 6.681516] [fglrx] vendor: 1002 device: 9501 count: 1 [ 6.681816] [fglrx] ioport: bar 4, base 0xd000, size: 0x100 [ 6.681829] pci 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 6.681834] pci 0000:01:00.0: setting latency timer to 64 [ 6.682024] [fglrx] Kernel PAT support is enabled [ 6.682048] [fglrx] module loaded - fglrx 8.84.60 [Mar 24 2011] with 1 minors [ 6.736779] bttv0: audio absent, no audio device found! [ 6.749570] i2c-core: driver [tuner] using legacy suspend method [ 6.749574] i2c-core: driver [tuner] using legacy resume method [ 6.806612] All bytes are equal. It is not a TEA5767 [ 6.806684] tuner 0-0060: chip found @ 0xc0 (bt848 #0 [sw]) [ 6.850472] tuner-simple 0-0060: creating new instance [ 6.850476] tuner-simple 0-0060: type set to 1 (Philips PAL_I (FI1246 and compatibles)) [ 6.851359] bttv0: registered device video0 [ 6.851390] bttv0: registered device vbi0 [ 6.851414] bttv0: registered device radio0 [ 6.851445] bttv0: PLL can sleep, using XTAL (35468950). [ 7.282701] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 7.372075] hda_codec: ALC888: BIOS auto-probing. [ 7.385051] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input5 [ 7.385293] HDA Intel 0000:01:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 7.385353] HDA Intel 0000:01:00.1: irq 43 for MSI/MSI-X [ 7.385377] HDA Intel 0000:01:00.1: setting latency timer to 64 [ 7.587334] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90011e80000, using 5120k, total 5120k [ 7.587338] vesafb: mode is 1280x1024x32, linelength=5120, pages=0 [ 7.587340] vesafb: scrolling: redraw [ 7.587342] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 [ 7.587539] Console: switching to colour frame buffer device 160x64 [ 7.587562] fb0: VESA VGA frame buffer device [ 7.920808] EXT4-fs (sdb5): re-mounted. Opts: errors=remount-ro [ 8.086238] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [ 8.873890] EXT4-fs (sdb7): mounted filesystem with ordered data mode. Opts: (null) [ 9.300311] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) [ 9.472821] EXT4-fs (sdb8): mounted filesystem with ordered data mode. Opts: (null) [ 10.636907] EXT4-fs (sdb6): mounted filesystem with ordered data mode. Opts: (null) [ 13.654422] EXT4-fs (sdc6): mounted filesystem with ordered data mode. Opts: (null) [ 20.062830] EXT4-fs (sdc5): mounted filesystem with ordered data mode. Opts: (null) [ 21.334621] type=1400 audit(1303581955.276:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=930 comm="apparmor_parser" [ 21.334914] type=1400 audit(1303581955.276:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=930 comm="apparmor_parser" [ 21.335092] type=1400 audit(1303581955.276:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=930 comm="apparmor_parser" [ 21.349627] type=1400 audit(1303581955.286:11): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=929 comm="apparmor_parser" [ 21.414970] type=1400 audit(1303581955.356:12): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=931 comm="apparmor_parser" [ 21.418615] type=1400 audit(1303581955.356:13): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=931 comm="apparmor_parser" [ 21.420868] type=1400 audit(1303581955.366:14): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=931 comm="apparmor_parser" [ 21.468725] type=1400 audit(1303581955.406:15): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=933 comm="apparmor_parser" [ 21.469072] type=1400 audit(1303581955.406:16): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=933 comm="apparmor_parser" [ 21.482725] type=1400 audit(1303581955.426:17): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld-akonadi" pid=940 comm="apparmor_parser" [ 21.728830] ppdev: user-space parallel port driver [ 23.473068] ip_tables: (C) 2000-2006 Netfilter Core Team [ 23.494580] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 23.842471] r8169 0000:02:00.0: eth0: link down [ 23.842478] r8169 0000:02:00.0: eth0: link down [ 23.842758] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 23.874310] process `sysctl' is using deprecated sysctl (syscall) net.ipv6.neigh.default.retrans_time; Use net.ipv6.neigh.default.retrans_time_ms instead. [ 23.950832] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 25.036219] fglrx_pci 0000:01:00.0: irq 44 for MSI/MSI-X [ 25.036743] [fglrx] Firegl kernel thread PID: 1819 [ 25.036845] [fglrx] Firegl kernel thread PID: 1820 [ 25.036905] [fglrx] Firegl kernel thread PID: 1821 [ 25.037146] [fglrx] IRQ 44 Enabled [ 25.456273] r8169 0000:02:00.0: eth0: link up [ 25.456510] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready