[   15.722213] ata1.00: configured for UDMA/133
[   15.722230] ata1: EH complete
[   15.745784] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[   16.580130] Skipping EDID probe due to cached edid
[   16.616133] Skipping EDID probe due to cached edid
[   16.652131] Skipping EDID probe due to cached edid
[   16.772121] Skipping EDID probe due to cached edid
[   19.040155] Skipping EDID probe due to cached edid
[   19.393233] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=600
[   24.800057] eth1: no IPv6 routers present
[   49.958060] padlock: VIA PadLock not detected.
[   51.900657] Skipping EDID probe due to cached edid
[   51.956135] Skipping EDID probe due to cached edid
[   51.992630] Skipping EDID probe due to cached edid
[   52.028189] Skipping EDID probe due to cached edid
[   52.272662] Skipping EDID probe due to cached edid
[   58.772133] Skipping EDID probe due to cached edid
[  106.588424] ata1: hard resetting link
[  107.072146] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[  107.073312] ata1.00: unexpected _GTF length (4)
[  107.074931] ata1.00: unexpected _GTF length (4)
[  107.075353] ata1.00: configured for UDMA/133
[  107.075369] ata1: EH complete
[  107.076008] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  107.310867] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
[  110.041595] PM: Syncing filesystems ... done.
[  110.043817] PM: Preparing system for mem sleep
[  110.292572] Freezing user space processes ... (elapsed 0.01 seconds) done.
[  110.308251] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[  110.324209] PM: Entering mem sleep
[  110.324262] Suspending console(s) (use no_console_suspend to debug)
[  110.324814] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[  110.345669] wl 0000:02:00.0: PCI INT A disabled
[  110.345732] atl1c 0000:01:00.0: PCI INT A disabled
[  110.346078] uhci_hcd 0000:00:1d.3: PCI INT D disabled
[  110.346139] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[  110.346189] uhci_hcd 0000:00:1d.1: PCI INT B disabled
[  110.346252] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[  110.351873] sd 0:0:0:0: [sda] Stopping disk
[  110.360683] ehci_hcd 0000:00:1d.7: PCI INT A disabled
[  110.449124] HDA Intel 0000:00:1b.0: PCI INT A disabled
[  110.464049] PM: suspend of drv:HDA Intel dev:0000:00:1b.0 complete after 117.621 msecs
[  110.822629] PM: suspend of drv:sd dev:0:0:0:0 complete after 497.819 msecs
[  110.822679] PM: suspend of drv:scsi dev:target0:0:0 complete after 497.760 msecs
[  110.822705] PM: suspend of drv:scsi dev:host0 complete after 497.704 msecs
[  110.868121] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 522.270 msecs
[  110.868175] PM: suspend of drv: dev:pci0000:00 complete after 521.179 msecs
[  110.868200] PM: suspend of devices complete after 543.722 msecs
[  110.868207] PM: suspend devices took 0.544 seconds
[  110.884417] PM: late suspend of devices complete after 16.200 msecs
[  110.884455] ACPI: Preparing to enter system sleep state S3
[  110.885010] PM: Saving platform NVS memory
[  110.892910] Disabling non-boot CPUs ...
[  110.996059] CPU 1 is now offline
[  110.996065] SMP alternatives: switching to UP code
[  111.001936] Back to C!
[  111.001936] PM: Restoring platform NVS memory
[  111.001936] CPU0: Thermal monitoring handled by SMI
[  111.001936] Enabling non-boot CPUs ...
[  111.001936] SMP alternatives: switching to SMP code
[  111.007487] Booting Node 0 Processor 1 APIC 0x1
[  111.001129] Initializing CPU#1
[  111.001129] CPU1: Thermal monitoring handled by SMI
[  111.116556] CPU1 is up
[  111.116987] ACPI: Waking up from system sleep state S3
[  111.117759] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407)
[  111.117841] HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[  111.117852] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[  111.117897] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x1ff)
[  111.117915] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0x50f15001)
[  111.117924] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0x57f05700)
[  111.117934] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20000000, writing 0x5050)
[  111.117943] pcieport 0000:00:1c.0: restoring config space at offset 0x6 (was 0x0, writing 0x10100)
[  111.117956] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[  111.117967] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
[  111.118029] pcieport 0000:00:1c.1: restoring config space at offset 0xf (was 0x200, writing 0x2ff)
[  111.118047] pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0x51f15101)
[  111.118057] pcieport 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0x56f05600)
[  111.118066] pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0x20000000, writing 0x4040)
[  111.118076] pcieport 0000:00:1c.1: restoring config space at offset 0x6 (was 0x0, writing 0x20200)
[  111.118089] pcieport 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[  111.118100] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
[  111.118174] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[  111.118219] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[  111.118264] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[  111.118309] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[  111.118357] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x4 (was 0x0, writing 0x58204400)
[  111.118371] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002)
[  111.118405] pci 0000:00:1e.0: restoring config space at offset 0xf (was 0x0, writing 0xff)
[  111.118516] ahci 0000:00:1f.2: restoring config space at offset 0x9 (was 0x58200000, writing 0x58204000)
[  111.118537] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
[  111.118637] atl1c 0000:01:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[  111.118672] atl1c 0000:01:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[  111.118684] atl1c 0000:01:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
[  111.118768] wl 0000:02:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
[  111.118811] wl 0000:02:00.0: restoring config space at offset 0x4 (was 0x4, writing 0x56000004)
[  111.118823] wl 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[  111.118838] wl 0000:02:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100006)
[  111.119336] PM: early resume of devices complete after 1.739 msecs
[  111.120756] i915 0000:00:02.0: setting latency timer to 64
[  111.122279] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[  111.122294] HDA Intel 0000:00:1b.0: setting latency timer to 64
[  111.122358] HDA Intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[  111.122435] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[  111.122447] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[  111.122479] usb usb2: root hub lost power or was reset
[  111.122513] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[  111.122525] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[  111.122555] usb usb3: root hub lost power or was reset
[  111.122608] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[  111.122620] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[  111.122649] usb usb4: root hub lost power or was reset
[  111.122681] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[  111.122692] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[  111.122721] usb usb5: root hub lost power or was reset
[  111.122754] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[  111.122766] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[  111.122850] pci 0000:00:1e.0: setting latency timer to 64
[  111.122880] ahci 0000:00:1f.2: setting latency timer to 64
[  111.123005] wl 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[  111.123018] wl 0000:02:00.0: setting latency timer to 64
[  111.137337] sd 0:0:0:0: [sda] Starting disk
[  111.256773] PM: resume of drv:i915 dev:0000:00:02.0 complete after 136.026 msecs
[  111.280588] PM: resume of drv:usb dev:usb2 complete after 143.829 msecs
[  111.280673] PM: resume of drv:usb dev:usb4 complete after 143.836 msecs
[  111.280722] PM: resume of drv:usb dev:usb5 complete after 143.779 msecs
[  111.280746] PM: resume of drv:hub dev:2-0:1.0 complete after 143.976 msecs
[  111.280763] PM: resume of drv:hub dev:4-0:1.0 complete after 143.917 msecs
[  111.280778] PM: resume of drv:hub dev:5-0:1.0 complete after 143.798 msecs
[  111.292551] PM: resume of drv:usb dev:usb1 complete after 155.829 msecs
[  111.292575] PM: resume of drv:hub dev:1-0:1.0 complete after 155.841 msecs
[  111.384588] PM: resume of drv:usb dev:usb3 complete after 247.765 msecs
[  111.384618] PM: resume of drv:hub dev:3-0:1.0 complete after 247.786 msecs
[  111.404561] usb 1-4: reset high speed USB device using ehci_hcd and address 3
[  111.456582] ata2: SATA link down (SStatus 0 SControl 300)
[  111.623296] PM: resume of drv:usb dev:1-4 complete after 486.250 msecs
[  111.623334] PM: resume of drv:uvcvideo dev:1-4:1.0 complete after 486.246 msecs
[  111.623347] PM: resume of drv:uvcvideo dev:1-4:1.1 complete after 486.216 msecs
[  111.664571] usb 3-1: reset full speed USB device using uhci_hcd and address 2
[  111.825630] PM: resume of drv:usb dev:3-1 complete after 688.457 msecs
[  111.825669] PM: resume of drv:usbhid dev:3-1:1.0 complete after 688.454 msecs
[  111.825686] PM: resume of drv:usbhid dev:3-1:1.1 complete after 688.422 msecs
[  111.904311] PM: resume of drv:battery dev:PNP0C0A:00 complete after 671.345 msecs
[  112.713530] psmouse serio1: ID: 73 02 64
[  113.244604] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[  113.245747] ata1.00: unexpected _GTF length (4)
[  113.261251] ata1.00: unexpected _GTF length (4)
[  113.261747] ata1.00: configured for UDMA/133
[  113.303486] PM: resume of drv:sd dev:0:0:0:0 complete after 2166.145 msecs
[  113.303535] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 2166.093 msecs
[  113.303543] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 1326.771 msecs
[  113.303722] PM: resume of devices complete after 2183.876 msecs
[  113.303968] PM: resume devices took 2.184 seconds
[  113.304060] PM: Finishing wakeup.
[  113.304065] Restarting tasks ... done.
[  113.305270] video LNXVIDEO:00: Restoring backlight state
[  113.578467] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id
[  113.632598] Skipping EDID probe due to cached edid
[  114.094744] atl1c 0000:01:00.0: irq 45 for MSI/MSI-X
[  114.095889] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  115.530969] ata1.00: configured for UDMA/133
[  115.530984] ata1: EH complete
[  115.531553] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[  116.295922] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=600
[  124.832120] eth1: no IPv6 routers present
[  154.697212] ata1: hard resetting link
[  155.184119] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[  155.185076] ata1.00: unexpected _GTF length (4)
[  155.186576] ata1.00: unexpected _GTF length (4)
[  155.186983] ata1.00: configured for UDMA/133
[  155.186999] ata1: EH complete
[  155.243380] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  155.712896] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
[  944.511026] audit_printk_skb: 6 callbacks suppressed
[  944.511036] type=1400 audit(1285321562.215:14): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=8467 comm="apparmor_parser"
[  944.520429] type=1400 audit(1285321562.227:15): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=8467 comm="apparmor_parser"
[ 1028.952334] ata1.00: configured for UDMA/133
[ 1028.952353] ata1: EH complete
[ 1030.220556] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
[ 2168.443279] ptrace of non-child pid 9011 was attempted by: gdb (pid 16883)
[ 8932.868893] mutter[1390]: segfault at bf265fc0 ip 00277fed sp bf265fc0 error 6 in libgobject-2.0.so.0.2515.0[252000+42000]
[ 8957.581365] gnome-power-man[1369]: segfault at 1 ip 011014fb sp bfc8b1f0 error 4 in libgtk-x11-2.0.so.0.2107.0[ffa000+40a000]