Error: command /usr/share/gnome-power-manager/gnome-power-bugreport failed with exit code 1: Distro version: DISTRIB_ID=Ubuntu DISTRIB_RELEASE=10.04 DISTRIB_CODENAME=lucid DISTRIB_DESCRIPTION="Ubuntu 10.04 LTS" Kernel version: 2.6.32-19-generic g-p-m version: 2.30.0 HAL version: 0.5.14 System manufacturer: missing System version: missing System product: missing AC adapter present: Could not initialise connection to hald. Normally this means the HAL daemon (hald) is not running or not ready. no Battery present: Could not initialise connection to hald. Normally this means the HAL daemon (hald) is not running or not ready. no Laptop panel present: Could not initialise connection to hald. Normally this means the HAL daemon (hald) is not running or not ready. no CPU scaling present: Could not initialise connection to hald. Normally this means the HAL daemon (hald) is not running or not ready. no Battery Information: Could not initialise connection to hald. Normally this means the HAL daemon (hald) is not running or not ready. DeviceKit data: Device: /org/freedesktop/UPower/devices/line_power_ACAD native-path: /sys/devices/LNXSYSTM:00/LNXSYBUS:00/ACPI0003:00/power_supply/ACAD power supply: yes updated: Thu Apr 29 22:57:41 2010 (28088 seconds ago) has history: no has statistics: no line-power online: yes Device: /org/freedesktop/UPower/devices/battery_BAT1 native-path: /sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0A:00/power_supply/BAT1 vendor: Sanyo model: 60S6701 serial: 27149 power supply: yes updated: Fri Apr 30 06:45:25 2010 (24 seconds ago) has history: yes has statistics: yes battery present: yes rechargeable: yes state: charging energy: 26.492 Wh energy-empty: 0 Wh energy-full: 29.1116 Wh energy-full-design: 65.12 Wh energy-rate: 0 W voltage: 18.96 V percentage: 91.0015% capacity: 44.7045% Daemon: daemon-version: 0.9.1 can-suspend: yes can-hibernate no on-battery: no on-low-battery: no lid-is-closed: no lid-is-present: yes GNOME Power Manager Process Information: HAL Process Information: