[ 25.646885] [drm] Initialized drm 1.1.0 20060810 [ 25.710964] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 25.710971] pci 0000:00:02.0: setting latency timer to 64 [ 25.713874] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 27.512159] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 27.697921] input: b43-phy0 as /devices/virtual/input/input8 [ 27.752088] b43 ssb0:0: firmware: requesting b43/ucode5.fw [ 27.870752] b43 ssb0:0: firmware: requesting b43/pcm5.fw [ 27.896886] b43 ssb0:0: firmware: requesting b43/b0g0initvals5.fw [ 27.941588] b43 ssb0:0: firmware: requesting b43/b0g0bsinitvals5.fw [ 28.076053] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10) [ 28.165624] Registered led device: b43-phy0::tx [ 28.165644] Registered led device: b43-phy0::rx [ 28.165665] Registered led device: b43-phy0::radio [ 28.180040] b43-phy0: Radio turned on by software [ 28.188603] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 29.816220] b43-phy0: Radio hardware status changed to DISABLED [ 29.856040] b43-phy0: Radio turned on by software [ 29.856048] b43-phy0: The hardware RF-kill button still turns the radio physically off. Press the button to turn it on. [ 30.816187] b44: eth0: Link is up at 100 Mbps, full duplex. [ 30.816192] b44: eth0: Flow control is off for TX and off for RX. [ 30.820692] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 34.404110] CIFS: Unknown mount option codepage [ 34.404115] CIFS: Unknown mount option unicode [ 34.535829] CIFS: Unknown mount option codepage [ 34.535839] CIFS: Unknown mount option unicode [ 35.048934] CIFS: Unknown mount option codepage [ 35.048946] CIFS: Unknown mount option unicode [ 41.056119] CIFS VFS: Error connecting to socket. Aborting operation [ 41.056135] CIFS VFS: cifs_mount failed w/return code = -113 [ 41.056320] CIFS: Unknown mount option codepage [ 41.056328] CIFS: Unknown mount option unicode [ 41.144030] eth0: no IPv6 routers present [ 47.064118] CIFS VFS: Error connecting to socket. Aborting operation [ 47.064133] CIFS VFS: cifs_mount failed w/return code = -113 [ 47.064312] CIFS: Unknown mount option codepage [ 47.064320] CIFS: Unknown mount option unicode [ 53.072109] CIFS VFS: Error connecting to socket. Aborting operation [ 53.072125] CIFS VFS: cifs_mount failed w/return code = -113 [ 68.329100] CPU0 attaching NULL sched-domain. [ 68.329152] CPU0 attaching NULL sched-domain. [ 696.456055] usb 1-6: new high speed USB device using ehci_hcd and address 4 [ 696.589135] usb 1-6: configuration #1 chosen from 1 choice [ 696.765364] Initializing USB Mass Storage driver... [ 696.765605] scsi2 : SCSI emulation for USB Mass Storage devices [ 696.766082] usbcore: registered new interface driver usb-storage [ 696.766090] USB Mass Storage support registered. [ 696.817126] usb-storage: device found at 4 [ 696.817133] usb-storage: waiting for device to settle before scanning [ 701.816197] usb-storage: device scan complete [ 701.821700] scsi 2:0:0:0: Direct-Access SAMSUNG MP0603H UD20 PQ: 0 ANSI: 0 CCS [ 701.822515] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 701.825770] sd 2:0:0:0: [sdb] 117304992 512-byte hardware sectors: (60.0 GB/55.9 GiB) [ 701.826260] sd 2:0:0:0: [sdb] Write Protect is off [ 701.826269] sd 2:0:0:0: [sdb] Mode Sense: 00 14 00 00 [ 701.826275] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 701.878618] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 701.878631] sdb: sdb1 [ 702.337937] sd 2:0:0:0: [sdb] Attached SCSI disk [ 3948.935671] usb 1-6: USB disconnect, address 4 [31722.276055] usb 4-2: new full speed USB device using uhci_hcd and address 2 [31722.538279] usb 4-2: configuration #2 chosen from 1 choice [31722.988448] cdc_acm 4-2:2.1: ttyACM0: USB ACM device [31722.991260] usbcore: registered new interface driver cdc_acm [31722.991270] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters [31730.032110] usb 4-2: USB disconnect, address 2 [31731.264056] usb 4-2: new full speed USB device using uhci_hcd and address 3 [31731.454486] usb 4-2: configuration #3 chosen from 1 choice [31731.477051] scsi3 : SCSI emulation for USB Mass Storage devices [31731.516227] usb-storage: device found at 3 [31731.516231] usb-storage: waiting for device to settle before scanning [31736.517454] usb-storage: device scan complete [31736.520473] scsi 3:0:0:0: Direct-Access Philips Dev. 0 LUN 0 1.0 PQ: 0 ANSI: 0 [31736.523496] scsi 3:0:0:1: Direct-Access Philips Dev. 0 LUN 1 1.0 PQ: 0 ANSI: 0 [31736.524008] sd 3:0:0:0: Attached scsi generic sg2 type 0 [31736.524099] sd 3:0:0:1: Attached scsi generic sg3 type 0 [31736.586445] sd 3:0:0:0: [sdb] 3932160 512-byte hardware sectors: (2.01 GB/1.87 GiB) [31736.595664] sd 3:0:0:0: [sdb] Test WP failed, assume Write Enabled [31736.595671] sd 3:0:0:0: [sdb] Assuming drive cache: write through [31736.598440] sd 3:0:0:1: [sdc] 98966 512-byte hardware sectors: (50.6 MB/48.3 MiB) [31736.607443] sd 3:0:0:1: [sdc] Test WP failed, assume Write Enabled [31736.607448] sd 3:0:0:1: [sdc] Assuming drive cache: write through [31736.627451] sd 3:0:0:0: [sdb] Test WP failed, assume Write Enabled [31736.627458] sd 3:0:0:0: [sdb] Assuming drive cache: write through [31736.627463] sdb: sdb1 [31736.648467] sd 3:0:0:1: [sdc] Test WP failed, assume Write Enabled [31736.648477] sd 3:0:0:1: [sdc] Assuming drive cache: write through [31736.648487] sdc:<5>sd 3:0:0:0: [sdb] Attached SCSI removable disk [31736.657474] [31736.659571] sd 3:0:0:1: [sdc] Attached SCSI removable disk [31843.179487] warning: `VirtualBox' uses 32-bit capabilities (legacy support in use) [31850.492230] device eth0 entered promiscuous mode [31854.776076] usb 4-2: USB disconnect, address 3 [31865.252032] usb 4-2: new full speed USB device using uhci_hcd and address 4 [31865.450274] usb 4-2: configuration #2 chosen from 1 choice [31865.461135] cdc_acm 4-2:2.1: ttyACM0: USB ACM device [67108.968135] usb 4-2: USB disconnect, address 4 [95065.963047] device eth0 left promiscuous mode [98405.340371] device eth0 entered promiscuous mode [107049.093954] device eth0 left promiscuous mode [196404.784994] CIFS: Unknown mount option codepage [196404.785000] CIFS: Unknown mount option unicode [196404.807070] CIFS VFS: cifs_mount failed w/return code = -5 [196467.172321] CIFS: Unknown mount option codepage [196467.172327] CIFS: Unknown mount option unicode [196467.176613] CIFS VFS: cifs_mount failed w/return code = -5 [196840.837239] CIFS: Unknown mount option codepage [196840.837246] CIFS: Unknown mount option unicode [197855.161784] CIFS: Unknown mount option codepage [197855.161790] CIFS: Unknown mount option unicode [197861.168107] CIFS VFS: Error connecting to socket. Aborting operation [197861.168124] CIFS VFS: cifs_mount failed w/return code = -113 [197861.168329] CIFS: Unknown mount option codepage [197861.168337] CIFS: Unknown mount option unicode [197867.176119] CIFS VFS: Error connecting to socket. Aborting operation [197867.176135] CIFS VFS: cifs_mount failed w/return code = -113 [197867.176372] CIFS: Unknown mount option codepage [197867.176381] CIFS: Unknown mount option unicode [197873.184111] CIFS VFS: Error connecting to socket. Aborting operation [197873.184127] CIFS VFS: cifs_mount failed w/return code = -113 [197944.218513] CIFS: Unknown mount option codepage [197944.218519] CIFS: Unknown mount option unicode [203002.321862] device eth0 entered promiscuous mode [204963.419455] notify-osd[3674]: segfault at c07f7ed4 ip b7833dd9 sp bfed5e54 error 5 in libc-2.9.so[b77c4000+15c000] [207877.795031] notify-osd[20934]: segfault at c0ef78e4 ip b76d1dd9 sp bf81e254 error 5 in libc-2.9.so[b7662000+15c000] [209503.146704] notify-osd[24654]: segfault at c05f8504 ip b77d3dd9 sp bfbeb734 error 5 in libc-2.9.so[b7764000+15c000] [223325.236043] CIFS VFS: No response for cmd 114 mid 60775 [245375.440056] usb 1-6: new high speed USB device using ehci_hcd and address 6 [245375.573351] usb 1-6: configuration #1 chosen from 1 choice [245375.574172] scsi4 : SCSI emulation for USB Mass Storage devices [245375.574536] usb-storage: device found at 6 [245375.574541] usb-storage: waiting for device to settle before scanning [245380.572195] usb-storage: device scan complete [245380.572661] scsi 4:0:0:0: Direct-Access PQ: 0 ANSI: 2 CCS [245380.573355] sd 4:0:0:0: Attached scsi generic sg2 type 0 [245380.575231] sd 4:0:0:0: [sdb] Attached SCSI disk [245410.037022] usb 1-6: USB disconnect, address 6 [245411.348059] usb 1-6: new high speed USB device using ehci_hcd and address 7 [245411.481178] usb 1-6: configuration #1 chosen from 1 choice [245411.530906] scsi5 : SCSI emulation for USB Mass Storage devices [245411.581433] usb-storage: device found at 7 [245411.581437] usb-storage: waiting for device to settle before scanning [245416.580194] usb-storage: device scan complete [245416.799584] scsi 5:0:0:0: Direct-Access ST325082 0NS PQ: 0 ANSI: 2 CCS [245416.800218] sd 5:0:0:0: Attached scsi generic sg2 type 0 [245416.870385] sd 5:0:0:0: [sdb] 488397168 512-byte hardware sectors: (250 GB/232 GiB) [245416.870879] sd 5:0:0:0: [sdb] Write Protect is off [245416.870883] sd 5:0:0:0: [sdb] Mode Sense: 00 38 00 00 [245416.870886] sd 5:0:0:0: [sdb] Assuming drive cache: write through [245416.872633] sd 5:0:0:0: [sdb] Assuming drive cache: write through [245416.872639] sdb: sdb1 [245416.886303] sd 5:0:0:0: [sdb] Attached SCSI disk [247260.112169] usb 1-6: USB disconnect, address 7 [247261.420065] usb 1-6: new high speed USB device using ehci_hcd and address 8 [247261.553267] usb 1-6: configuration #1 chosen from 1 choice [247261.555865] scsi6 : SCSI emulation for USB Mass Storage devices [247261.559418] usb-storage: device found at 8 [247261.559422] usb-storage: waiting for device to settle before scanning [247264.514527] usb 1-6: USB disconnect, address 8 [247279.544059] usb 1-6: new high speed USB device using ehci_hcd and address 9 [247279.678626] usb 1-6: configuration #1 chosen from 1 choice [247279.726793] scsi7 : SCSI emulation for USB Mass Storage devices [247279.813455] usb-storage: device found at 9 [247279.813459] usb-storage: waiting for device to settle before scanning [247284.812428] usb-storage: device scan complete [247284.813164] scsi 7:0:0:0: Direct-Access JetFlash Transcend 16GB 8.07 PQ: 0 ANSI: 2 [247284.813587] sd 7:0:0:0: Attached scsi generic sg2 type 0 [247284.872154] sd 7:0:0:0: [sdb] 31375360 512-byte hardware sectors: (16.0 GB/14.9 GiB) [247284.872773] sd 7:0:0:0: [sdb] Write Protect is off [247284.872776] sd 7:0:0:0: [sdb] Mode Sense: 03 00 00 00 [247284.872780] sd 7:0:0:0: [sdb] Assuming drive cache: write through [247284.874890] sd 7:0:0:0: [sdb] Assuming drive cache: write through [247284.874895] sdb: sdb1 [247285.152461] sd 7:0:0:0: [sdb] Attached SCSI removable disk [247417.219662] usb 1-6: USB disconnect, address 9 [282506.712775] device eth0 left promiscuous mode [282805.217990] device eth0 entered promiscuous mode [283171.709356] device eth0 left promiscuous mode [294082.301165] device eth0 entered promiscuous mode [294106.725198] device eth0 left promiscuous mode [294106.735496] device eth0 entered promiscuous mode [294108.301049] device eth0 left promiscuous mode [294108.306392] device eth0 entered promiscuous mode [294129.933686] device eth0 left promiscuous mode [294139.949287] device eth0 entered promiscuous mode [294148.976786] device eth0 left promiscuous mode [294148.986386] device eth0 entered promiscuous mode [294163.748667] device eth0 left promiscuous mode [308990.740044] CIFS VFS: No response for cmd 114 mid 47857 [361004.240053] usb 4-2: new full speed USB device using uhci_hcd and address 5 [361004.429384] usb 4-2: configuration #3 chosen from 1 choice [361004.437400] scsi8 : SCSI emulation for USB Mass Storage devices [361004.437683] usb-storage: device found at 5 [361004.437685] usb-storage: waiting for device to settle before scanning [361009.437401] usb-storage: device scan complete [361009.440496] scsi 8:0:0:0: Direct-Access Philips Dev. 0 LUN 0 1.0 PQ: 0 ANSI: 0 [361009.443380] scsi 8:0:0:1: Direct-Access Philips Dev. 0 LUN 1 1.0 PQ: 0 ANSI: 0 [361009.443929] sd 8:0:0:0: Attached scsi generic sg2 type 0 [361009.444001] sd 8:0:0:1: Attached scsi generic sg3 type 0 [361009.506296] sd 8:0:0:0: [sdb] 3932160 512-byte hardware sectors: (2.01 GB/1.87 GiB) [361009.515527] sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled [361009.515534] sd 8:0:0:0: [sdb] Assuming drive cache: write through [361009.518344] sd 8:0:0:1: [sdc] 98966 512-byte hardware sectors: (50.6 MB/48.3 MiB) [361009.526344] sd 8:0:0:1: [sdc] Test WP failed, assume Write Enabled [361009.526351] sd 8:0:0:1: [sdc] Assuming drive cache: write through [361009.542346] sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled [361009.542352] sd 8:0:0:0: [sdb] Assuming drive cache: write through [361009.542358] sdb: sdb1 [361009.559415] sd 8:0:0:0: [sdb] Attached SCSI removable disk [361009.566355] sd 8:0:0:1: [sdc] Test WP failed, assume Write Enabled [361009.566362] sd 8:0:0:1: [sdc] Assuming drive cache: write through [361009.566368] sdc: [361009.576291] sd 8:0:0:1: [sdc] Attached SCSI removable disk [361285.334352] device eth0 entered promiscuous mode [362742.080232] usb 4-2: USB disconnect, address 5 [362742.276805] hald[2737]: segfault at b7a16008 ip b7d3e078 sp bfb89ecc error 4 in libc-2.9.so[b7cc7000+15c000] [366251.920944] gnome-power-man[3670]: segfault at 8 ip 0806de43 sp bf88c4b0 error 4 in gnome-power-manager[8048000+50000]