[ 0.000000] Linux version 2.6.22-12-generic (buildd@vernadsky) (gcc version 4.1.3 20070831 (prerelease) (Ubuntu 4.1.2-16ubuntu1)) #1 SMP Sun Sep 23 18:11:30 GMT 2007 (Ubuntu 2.6.22-12.39-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000001ff70000 (usable) [ 0.000000] BIOS-e820: 000000001ff70000 - 000000001ff7e000 (ACPI data) [ 0.000000] BIOS-e820: 000000001ff7e000 - 000000001ff80000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000001ff80000 - 0000000020000000 (reserved) [ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 511MB LOWMEM available. [ 0.000000] Entering add_active_range(0, 0, 130928) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 130928 [ 0.000000] HighMem 130928 -> 130928 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 130928 [ 0.000000] On node 0 totalpages: 130928 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 990 pages used for memmap [ 0.000000] Normal zone: 125842 pages, LIFO batch:31 [ 0.000000] HighMem zone: 0 pages used for memmap [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP 000F7450, 0024 (r2 IBM ) [ 0.000000] ACPI: XSDT 1FF73AF2, 0044 (r1 IBM TP-1A 1180 LTP 0) [ 0.000000] ACPI: FACP 1FF73C00, 0081 (r1 IBM TP-1A 1180 IBM 1) [ 0.000000] ACPI: DSDT 1FF73CE7, A1EA (r1 IBM TP-1A 1180 MSFT 100000D) [ 0.000000] ACPI: FACS 1FF7F000, 0040 [ 0.000000] ACPI: SSDT 1FF73CB4, 0033 (r1 IBM TP-1A 1180 MSFT 100000D) [ 0.000000] ACPI: ECDT 1FF7DED1, 0052 (r1 IBM TP-1A 1180 IBM 1) [ 0.000000] ACPI: BOOT 1FF7DFD8, 0028 (r1 IBM TP-1A 1180 LTP 1) [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:df800000) [ 0.000000] Built 1 zonelists. Total pages: 129906 [ 0.000000] Kernel command line: root=UUID=53404dc7-481a-4ef0-9b26-53e1bd581957 ro quiet splash [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" [ 0.000000] mapped APIC to ffffd000 (0140d000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes) [ 0.000000] Detected 732.720 MHz processor. [ 8.329007] Console: colour VGA+ 80x25 [ 8.329453] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 8.330102] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 8.364487] Memory: 507660k/523712k available (2017k kernel code, 15440k reserved, 918k data, 364k init, 0k highmem) [ 8.364515] virtual kernel memory layout: [ 8.364518] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB) [ 8.364522] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 8.364526] vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB) [ 8.364530] lowmem : 0xc0000000 - 0xdff70000 ( 511 MB) [ 8.364534] .init : 0xc03e3000 - 0xc043e000 ( 364 kB) [ 8.364538] .data : 0xc02f8456 - 0xc03ddea4 ( 918 kB) [ 8.364542] .text : 0xc0100000 - 0xc02f8456 (2017 kB) [ 8.364551] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 8.364645] SLUB: Genslabs=22, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 [ 8.444649] Calibrating delay using timer specific routine.. 1466.88 BogoMIPS (lpj=2933761) [ 8.444709] Security Framework v1.0.0 initialized [ 8.444727] SELinux: Disabled at boot. [ 8.444765] Mount-cache hash table entries: 512 [ 8.445044] CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000 [ 8.445071] CPU: L1 I cache: 16K, L1 D cache: 16K [ 8.445079] CPU: L2 cache: 512K [ 8.445086] CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000 [ 8.445109] Compat vDSO mapped to ffffe000. [ 8.445134] Checking 'hlt' instruction... OK. [ 8.460812] SMP alternatives: switching to UP code [ 8.461131] Freeing SMP alternatives: 11k freed [ 8.461721] Early unpacking initramfs... done [ 9.277226] ACPI: Core revision 20070126 [ 9.277519] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 9.288215] ACPI: setting ELCR to 0200 (from 0800) [ 9.299089] CPU0: Intel(R) Pentium(R) III Mobile CPU 1133MHz stepping 01 [ 9.299105] SMP motherboard not detected. [ 9.299112] Local APIC not detected. Using dummy APIC emulation. [ 9.299207] Brought up 1 CPUs [ 9.299492] Booting paravirtualized kernel on bare hardware [ 9.299596] Time: 0:33:59 Date: 08/27/107 [ 9.299656] NET: Registered protocol family 16 [ 9.299875] EISA bus registered [ 9.299896] ACPI: bus type pci registered [ 9.300245] PCI: PCI BIOS revision 2.10 entry at 0xfd8fe, last bus=8 [ 9.300252] PCI: Using configuration type 1 [ 9.300258] Setting up standard PCI resources [ 9.307322] ACPI: EC: Found ECDT [ 9.323570] ACPI: Interpreter enabled [ 9.323578] ACPI: (supports S0 S3 S4 S5) [ 9.323622] ACPI: Using PIC for interrupt routing [ 9.340864] ACPI: EC: GPE=0x1c, ports=0x66, 0x62 [ 9.340978] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 9.340993] PCI: Probing PCI hardware (bus 00) [ 9.341406] PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO [ 9.341416] PCI quirk: region 1180-11bf claimed by ICH4 GPIO [ 9.341954] PCI: Firmware left 0000:02:08.0 e100 interrupts enabled, disabling [ 9.342025] PCI: Transparent bridge - 0000:00:1e.0 [ 9.342249] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 9.342390] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 9.342448] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [ 9.351379] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) [ 9.351872] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) [ 9.352405] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) [ 9.352898] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) [ 9.353391] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) [ 9.353840] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 9.354292] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 9.354742] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 9.355302] ACPI: Power Resource [PUBS] (on) [ 9.355331] Linux Plug and Play Support v0.97 (c) Adam Belay [ 9.355365] pnp: PnP ACPI init [ 9.355385] ACPI: bus type pnp registered [ 9.363811] pnp: PnP ACPI: found 13 devices [ 9.363817] ACPI: ACPI bus type pnp unregistered [ 9.363826] PnPBIOS: Disabled by ACPI PNP [ 9.363948] PCI: Using ACPI for IRQ routing [ 9.363957] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 9.373256] NET: Registered protocol family 8 [ 9.373263] NET: Registered protocol family 20 [ 9.373404] pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved [ 9.373414] pnp: 00:00: iomem range 0xc0000-0xc3fff could not be reserved [ 9.373423] pnp: 00:00: iomem range 0xc4000-0xc7fff could not be reserved [ 9.373432] pnp: 00:00: iomem range 0xc8000-0xcbfff could not be reserved [ 9.376334] Time: tsc clocksource has been installed. [ 9.404220] PCI: Bridge: 0000:00:01.0 [ 9.404225] IO window: disabled. [ 9.404233] MEM window: c0100000-c01fffff [ 9.404241] PREFETCH window: e0000000-ebffffff [ 9.404257] PCI: Bus 3, cardbus bridge: 0000:02:00.0 [ 9.404263] IO window: 00003000-000030ff [ 9.404271] IO window: 00003400-000034ff [ 9.404279] PREFETCH window: f0000000-f3ffffff [ 9.404288] MEM window: c4000000-c7ffffff [ 9.404295] PCI: Bus 7, cardbus bridge: 0000:02:00.1 [ 9.404301] IO window: 00003800-000038ff [ 9.404309] IO window: 00003c00-00003cff [ 9.404317] PREFETCH window: f4000000-f7ffffff [ 9.404335] MEM window: c8000000-cbffffff [ 9.404342] PCI: Bridge: 0000:00:1e.0 [ 9.404349] IO window: 3000-7fff [ 9.404358] MEM window: c0200000-cfffffff [ 9.404366] PREFETCH window: ec000000-f7ffffff [ 9.404388] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 9.405295] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 [ 9.405303] PCI: setting IRQ 11 as level-triggered [ 9.405311] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 9.406163] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 [ 9.406170] ACPI: PCI Interrupt 0000:02:00.1[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 9.406207] NET: Registered protocol family 2 [ 9.444387] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 9.444481] TCP established hash table entries: 16384 (order: 5, 196608 bytes) [ 9.444917] TCP bind hash table entries: 16384 (order: 5, 131072 bytes) [ 9.445252] TCP: Hash tables configured (established 16384 bind 16384) [ 9.445260] TCP reno registered [ 9.456680] checking if image is initramfs...<6>Switched to high resolution mode on CPU 0 [ 10.190558] it is [ 11.026484] Freeing initrd memory: 7061k freed [ 11.026789] Simple Boot Flag at 0x35 set to 0x1 [ 11.027287] audit: initializing netlink socket (disabled) [ 11.027321] audit(1190853240.508:1): initialized [ 11.033238] VFS: Disk quotas dquot_6.5.1 [ 11.033395] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 11.033655] io scheduler noop registered [ 11.033663] io scheduler anticipatory registered [ 11.033669] io scheduler deadline registered [ 11.033721] io scheduler cfq registered (default) [ 11.033806] Boot video device is 0000:01:00.0 [ 11.034287] isapnp: Scanning for PnP cards... [ 11.387499] isapnp: No Plug & Play device found [ 11.455009] Real Time Clock Driver v1.12ac [ 11.455235] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 11.457714] pnp: Device 00:0a activated. [ 11.457997] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A [ 11.458466] PCI: Enabling device 0000:00:1f.6 (0000 -> 0001) [ 11.458482] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 11.458500] ACPI: PCI interrupt for device 0000:00:1f.6 disabled [ 11.460014] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 11.460490] input: Macintosh mouse button emulation as /class/input/input0 [ 11.460706] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 11.468401] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 11.468415] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 11.468826] mice: PS/2 mouse device common for all mice [ 11.469081] EISA: Probing bus 0 at eisa.0 [ 11.469097] Cannot allocate resource for EISA slot 1 [ 11.469105] Cannot allocate resource for EISA slot 2 [ 11.469112] Cannot allocate resource for EISA slot 3 [ 11.469118] Cannot allocate resource for EISA slot 4 [ 11.469124] Cannot allocate resource for EISA slot 5 [ 11.469130] Cannot allocate resource for EISA slot 6 [ 11.469136] Cannot allocate resource for EISA slot 7 [ 11.469146] EISA: Detected 0 cards. [ 11.469378] TCP cubic registered [ 11.469419] NET: Registered protocol family 1 [ 11.469485] Using IPI No-Shortcut mode [ 11.469885] Magic number: 7:74:558 [ 11.469994] hash matches device ptya4 [ 11.470556] Freeing unused kernel memory: 364k freed [ 11.499528] input: AT Translated Set 2 keyboard as /class/input/input1 [ 12.944929] AppArmor: AppArmor initialized<5>audit(1190853242.508:2): type=1505 info="AppArmor initialized" pid=1191 [ 12.961521] fuse init (API version 7.8) [ 12.973572] Failure registering capabilities with primary security module. [ 13.007395] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 13.011784] ACPI: Thermal Zone [THM0] (50 C) [ 14.150834] usbcore: registered new interface driver usbfs [ 14.150892] usbcore: registered new interface driver hub [ 14.150955] usbcore: registered new device driver usb [ 14.154392] USB Universal Host Controller Interface driver v3.0 [ 14.154537] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 14.154561] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 14.154570] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 14.154844] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 14.154883] uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001800 [ 14.155173] usb usb1: configuration #1 chosen from 1 choice [ 14.155241] hub 1-0:1.0: USB hub found [ 14.155257] hub 1-0:1.0: 2 ports detected [ 14.259489] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 [ 14.259501] ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 [ 14.259524] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 14.259533] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 14.259594] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 14.259633] uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001820 [ 14.259890] usb usb2: configuration #1 chosen from 1 choice [ 14.259962] hub 2-0:1.0: USB hub found [ 14.259978] hub 2-0:1.0: 2 ports detected [ 14.309374] SCSI subsystem initialized [ 14.334263] libata version 2.21 loaded. [ 14.363436] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 [ 14.363447] ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 14.363472] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 14.363481] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 14.363542] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 14.363579] uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001840 [ 14.363835] usb usb3: configuration #1 chosen from 1 choice [ 14.363924] hub 3-0:1.0: USB hub found [ 14.363942] hub 3-0:1.0: 2 ports detected [ 14.483891] e100: Intel(R) PRO/100 Network Driver, 3.5.17-k4-NAPI [ 14.483901] e100: Copyright(c) 1999-2006 Intel Corporation [ 14.484951] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11 [ 14.484960] ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11 [ 14.508895] e100: eth0: e100_probe: addr 0xc0200000, irq 11, MAC addr 00:D0:59:83:D9:AC [ 14.531204] ata_piix 0000:00:1f.1: version 2.11 [ 14.531236] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) [ 14.531253] ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 14.531328] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 14.531635] scsi0 : ata_piix [ 14.531749] scsi1 : ata_piix [ 14.532849] ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011860 irq 14 [ 14.532860] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011868 irq 15 [ 14.694393] ata1.00: ATA-6: TOSHIBA MK8032GAX, AD001A, max UDMA/100 [ 14.694406] ata1.00: 156301488 sectors, multi 16: LBA48 [ 14.702342] ata1.00: configured for UDMA/100 [ 14.828015] Floppy drive(s): fd0 is 1.44M [ 14.959318] FDC 0 is a National Semiconductor PC87306 [ 15.022138] ata2.00: ATAPI: _NEC DVD_RW ND-6750A, 2.01, max UDMA/33 [ 6.740000] Marking TSC unstable due to: possible TSC halt in C2. [ 6.744000] Time: acpi_pm clocksource has been installed. [ 6.828000] ata2.00: configured for UDMA/33 [ 6.828000] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK8032GA AD00 PQ: 0 ANSI: 5 [ 6.828000] scsi 1:0:0:0: CD-ROM _NEC DVD_RW ND-6750A 2.01 PQ: 0 ANSI: 5 [ 6.876000] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 6.876000] sd 0:0:0:0: [sda] Write Protect is off [ 6.876000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 6.876000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.876000] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 6.876000] sd 0:0:0:0: [sda] Write Protect is off [ 6.876000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 6.876000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.876000] sda: sda1 sda2 < sda5 sda6 sda7 > sda3 sda4 [ 6.960000] sd 0:0:0:0: [sda] Attached SCSI disk [ 6.972000] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 6.972000] scsi 1:0:0:0: Attached scsi generic sg1 type 5 [ 6.988000] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 6.988000] Uniform CD-ROM driver Revision: 3.20 [ 6.988000] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 7.532000] Clocksource tsc unstable (delta = -175921655 ns) [ 7.572000] Attempting manual resume [ 7.572000] swsusp: Resume From Partition 8:5 [ 7.572000] PM: Checking swsusp image. [ 7.572000] PM: Resume from disk failed. [ 7.628000] kjournald starting. Commit interval 5 seconds [ 7.628000] EXT3-fs: mounted filesystem with ordered data mode. [ 19.836000] ip_tables: (C) 2000-2006 Netfilter Core Team [ 19.856000] Netfilter messages via NETLINK v0.30. [ 19.880000] nf_conntrack version 0.5.0 (4091 buckets, 32728 max) [ 23.540000] Linux agpgart interface v0.102 (c) Dave Jones [ 23.560000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 23.812000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 23.820000] agpgart: Detected an Intel 830M Chipset. [ 23.840000] agpgart: AGP aperture is 256M @ 0xd0000000 [ 25.492000] iTCO_vendor_support: vendor-support=0 [ 26.360000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007) [ 26.380000] iTCO_wdt: Found a ICH3-M TCO device (Version=1, TCOBASE=0x1060) [ 26.380000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 26.560000] Yenta: CardBus bridge found at 0000:02:00.0 [1014:023b] [ 26.560000] Yenta: Using INTVAL to route CSC interrupts to PCI [ 26.560000] Yenta: Routing CardBus interrupts to PCI [ 26.560000] Yenta TI: socket 0000:02:00.0, mfunc 0x01d21022, devctl 0x64 [ 26.792000] Yenta: ISA IRQ mask 0x04b8, PCI irq 11 [ 26.792000] Socket status: 30000006 [ 26.792000] pcmcia: parent PCI bridge I/O window: 0x3000 - 0x7fff [ 26.792000] cs: IO port probe 0x3000-0x7fff: clean. [ 26.792000] pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xcfffffff [ 26.796000] pcmcia: parent PCI bridge Memory window: 0xec000000 - 0xf7ffffff [ 26.796000] Yenta: CardBus bridge found at 0000:02:00.1 [1014:023b] [ 26.796000] Yenta: Using INTVAL to route CSC interrupts to PCI [ 26.796000] Yenta: Routing CardBus interrupts to PCI [ 26.796000] Yenta TI: socket 0000:02:00.1, mfunc 0x01d21022, devctl 0x64 [ 26.848000] IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 26.860000] input: TPPS/2 IBM TrackPoint as /class/input/input2 [ 27.028000] Yenta: ISA IRQ mask 0x04b8, PCI irq 11 [ 27.028000] Socket status: 30000006 [ 27.028000] pcmcia: parent PCI bridge I/O window: 0x3000 - 0x7fff [ 27.028000] cs: IO port probe 0x3000-0x7fff: clean. [ 27.028000] pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xcfffffff [ 27.028000] pcmcia: parent PCI bridge Memory window: 0xec000000 - 0xf7ffffff [ 27.172000] intel_rng: FWH not detected [ 27.184000] input: PC Speaker as /class/input/input3 [ 27.256000] ieee80211_crypt: registered algorithm 'NULL' [ 27.308000] parport_pc 00:0b: reported by Plug and Play ACPI [ 27.308000] parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE] [ 27.424000] irda_init() [ 27.424000] NET: Registered protocol family 23 [ 27.484000] hostap_pci: 0.4.4-kernel (Jouni Malinen ) [ 27.484000] ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 27.484000] hostap_pci: Registered netdevice wifi0 [ 27.484000] wifi0: Original COR value: 0x0 [ 27.552000] pnp: Device 00:0c activated. [ 27.552000] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 1. [ 27.552000] nsc-ircc, chip->init [ 27.552000] nsc-ircc, Found chip at base=0x02e [ 27.552000] nsc-ircc, driver loaded (Dag Brattli) [ 27.552000] IrDA: Registered device irda0 [ 27.552000] nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500 [ 27.872000] prism2_hw_init: initialized in 384 ms [ 27.872000] wifi0: NIC: id=0x8013 v1.0.0 [ 27.872000] wifi0: PRI: id=0x15 v1.1.0 [ 27.872000] wifi0: STA: id=0x1f v1.7.4 [ 28.276000] cs: IO port probe 0x100-0x3af: clean. [ 28.280000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 28.280000] cs: IO port probe 0x820-0x8ff: clean. [ 28.280000] cs: IO port probe 0xc00-0xcf7: clean. [ 28.280000] cs: IO port probe 0xa00-0xaff: clean. [ 28.284000] cs: IO port probe 0x100-0x3af: clean. [ 28.284000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 28.284000] cs: IO port probe 0x820-0x8ff: clean. [ 28.284000] cs: IO port probe 0xc00-0xcf7: clean. [ 28.284000] cs: IO port probe 0xa00-0xaff: clean. [ 28.492000] wifi0: Intersil Prism2.5 PCI: mem=0xec000000, irq=11 [ 28.492000] wifi0: registered netdevice wlan0 [ 28.620000] PCI: Enabling device 0000:00:1f.5 (0000 -> 0001) [ 28.620000] ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 28.620000] PCI: Setting latency timer of device 0000:00:1f.5 to 64 [ 29.876000] intel8x0_measure_ac97_clock: measured 55382 usecs [ 29.876000] intel8x0: clocking to 48000 [ 30.216000] lp0: using parport0 (interrupt-driven). [ 30.336000] Adding 1510068k swap on /dev/sda5. Priority:-1 extents:1 across:1510068k [ 30.920000] EXT3 FS on sda6, internal journal [ 35.836000] kjournald starting. Commit interval 5 seconds [ 35.836000] EXT3 FS on sda1, internal journal [ 35.836000] EXT3-fs: mounted filesystem with ordered data mode. [ 35.872000] kjournald starting. Commit interval 5 seconds [ 35.872000] EXT3 FS on sda3, internal journal [ 35.872000] EXT3-fs: mounted filesystem with ordered data mode. [ 35.892000] kjournald starting. Commit interval 5 seconds [ 35.892000] EXT3 FS on sda7, internal journal [ 35.892000] EXT3-fs: mounted filesystem with ordered data mode. [ 38.076000] ACPI: ACPI Dock Station Driver [ 38.156000] ACPI: \_SB_.PCI0.IDE0.SCND.MSTR: found ejectable bay [ 38.156000] ACPI: \_SB_.PCI0.IDE0.SCND.MSTR: Adding notify handler [ 38.156000] ACPI: Error installing bay notify handler [ 38.156000] ACPI: Bay [\_SB_.PCI0.IDE0.SCND.MSTR] Added [ 38.360000] input: Power Button (FF) as /class/input/input4 [ 38.360000] ACPI: Power Button (FF) [PWRF] [ 38.408000] input: Lid Switch as /class/input/input5 [ 38.408000] ACPI: Lid Switch [LID] [ 38.432000] input: Sleep Button (CM) as /class/input/input6 [ 38.432000] ACPI: Sleep Button (CM) [SLPB] [ 38.772000] ACPI: AC Adapter [AC] (off-line) [ 38.808000] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 38.852000] ACPI: Battery Slot [BAT0] (battery present) [ 40.880000] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 40.880000] PCI: Setting latency timer of device 0000:00:1f.6 to 64 [ 41.620000] wifi0: LinkStatus=2 (Disconnected) [ 41.620000] wifi0: LinkStatus: BSSID=44:44:44:44:44:44 [ 42.060000] NET: Registered protocol family 10 [ 42.064000] lo: Disabled Privacy Extensions [ 42.064000] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 42.064000] ADDRCONF(NETDEV_UP): wifi0: link is not ready [ 42.064000] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 42.308000] wifi0: LinkStatus=1 (Connected) [ 42.308000] wifi0: LinkStatus: BSSID=00:14:bf:38:8a:54 [ 42.308000] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 42.308000] ADDRCONF(NETDEV_CHANGE): wifi0: link becomes ready [ 42.380000] ppdev: user-space parallel port driver [ 43.056000] audit(1190867681.731:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=4736 profile="/usr/sbin/cupsd" [ 43.208000] IBM machine detected. Enabling interrupts during APM calls. [ 43.208000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) [ 43.208000] apm: overridden by ACPI. [ 43.356000] thinkpad_acpi: ThinkPad ACPI Extras v0.14 [ 43.356000] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 43.356000] thinkpad_acpi: ThinkPad EC firmware 1AHT23WW-1.06a [ 43.364000] thinkpad_acpi: another device driver is already handling bay events [ 43.364000] thinkpad_acpi: disabling subdriver bay [ 43.448000] Non-volatile memory driver v1.2 [ 43.536000] input: /usr/sbin/thinkpad-keys as /class/input/input7 [ 44.876000] Failure registering capabilities with primary security module. [ 45.196000] Bluetooth: Core ver 2.11 [ 45.196000] NET: Registered protocol family 31 [ 45.196000] Bluetooth: HCI device and connection manager initialized [ 45.196000] Bluetooth: HCI socket layer initialized [ 45.236000] Bluetooth: L2CAP ver 2.8 [ 45.236000] Bluetooth: L2CAP socket layer initialized [ 45.328000] Bluetooth: RFCOMM socket layer initialized [ 45.328000] Bluetooth: RFCOMM TTY layer initialized [ 45.328000] Bluetooth: RFCOMM ver 1.8 [ 48.308000] [drm] Initialized drm 1.1.0 20060810 [ 48.332000] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 48.336000] [drm] Initialized savage 2.4.1 20050313 on minor 0 [ 48.336000] mtrr: base(0xe4000000) is not aligned on a size(0x5000000) boundary [ 48.336000] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. [ 48.336000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode [ 48.336000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode [ 49.928000] vmmon: module license 'unspecified' taints kernel. [ 49.936000] /dev/vmmon[5183]: VMCI: Driver initialized. [ 49.940000] /dev/vmmon[5183]: Module vmmon: registered with major=10 minor=165 [ 49.940000] /dev/vmmon[5183]: Initial HV check: anyNotCapable=1 anyUnlocked=0 anyEnabled=0 anyDisabled=0 [ 49.940000] /dev/vmmon[5183]: Module vmmon: initialized [ 50.768000] /dev/vmnet: open called by PID 5227 (vmnet-bridge) [ 50.768000] /dev/vmnet: hub 0 does not exist, allocating memory. [ 50.768000] /dev/vmnet: port on hub 0 successfully opened [ 50.768000] bridge-wlan0: enabling the bridge [ 50.768000] bridge-wlan0: up [ 50.768000] bridge-wlan0: already up [ 50.768000] bridge-wlan0: attached [ 50.932000] /dev/vmnet: open called by PID 5244 (vmnet-netifup) [ 50.932000] /dev/vmnet: hub 1 does not exist, allocating memory. [ 50.932000] /dev/vmnet: port on hub 1 successfully opened [ 51.480000] /dev/vmnet: open called by PID 5243 (vmnet-dhcpd) [ 51.480000] /dev/vmnet: port on hub 1 successfully opened [ 51.488000] /dev/vmnet: open called by PID 5266 (vmnet-bridge) [ 51.488000] /dev/vmnet: hub 2 does not exist, allocating memory. [ 51.488000] /dev/vmnet: port on hub 2 successfully opened [ 51.488000] bridge-eth0: enabling the bridge [ 51.488000] bridge-eth0: up [ 51.488000] bridge-eth0: already up [ 51.488000] bridge-eth0: attached [ 51.496000] /dev/vmnet: open called by PID 5273 (vmnet-netifup) [ 51.500000] /dev/vmnet: hub 8 does not exist, allocating memory. [ 51.500000] /dev/vmnet: port on hub 8 successfully opened [ 51.736000] /dev/vmnet: open called by PID 5288 (vmnet-dhcpd) [ 51.736000] /dev/vmnet: port on hub 8 successfully opened [ 51.804000] /dev/vmnet: open called by PID 5293 (vmnet-natd) [ 51.808000] /dev/vmnet: port on hub 8 successfully opened [ 52.328000] wlan0: no IPv6 routers present [ 61.688000] vmnet1: no IPv6 routers present [ 62.016000] vmnet8: no IPv6 routers present [ 87.892000] NET: Registered protocol family 17 [ 87.920000] wifi0: LinkStatus=2 (Disconnected) [ 87.920000] wifi0: LinkStatus: BSSID=00:14:bf:38:8a:54 [ 88.724000] wifi0: LinkStatus=2 (Disconnected) [ 88.724000] wifi0: LinkStatus: BSSID=44:44:44:44:44:44 [ 88.748000] wifi0: LinkStatus=2 (Disconnected) [ 88.748000] wifi0: LinkStatus: BSSID=44:44:44:44:44:44 [ 88.772000] wifi0: LinkStatus=2 (Disconnected) [ 88.772000] wifi0: LinkStatus: BSSID=44:44:44:44:44:44 [ 88.784000] wlan0: Trying to join BSSID 00:14:bf:38:8a:54 [ 88.808000] wifi0: LinkStatus=1 (Connected) [ 88.808000] wifi0: LinkStatus: BSSID=00:14:bf:38:8a:54 [ 105.304000] wlan0: no IPv6 routers present [ 322.064000] bridge-eth0: disabling the bridge [ 322.076000] bridge-eth0: down [ 322.220000] bridge-wlan0: disabling the bridge [ 322.232000] bridge-wlan0: down [ 322.800000] ACPI: PCI interrupt for device 0000:02:08.0 disabled [ 322.828000] wifi0: Original COR value: 0x0 [ 325.248000] wifi0: hfa384x_cmd: entry still in list? (entry=caef64c0, type=0, res=0) [ 325.248000] wifi0: hfa384x_cmd: command was not completed (res=0, entry=caef64c0, type=0, cmd=0x0021, param0=0xfdc6, EVSTAT=8010 INTEN=0000) [ 325.248000] wifi0: interrupt delivery does not seem to work [ 325.248000] wifi0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fdc6, len=12) [ 327.248000] wifi0: hfa384x_cmd: entry still in list? (entry=caef64c0, type=0, res=0) [ 327.248000] wifi0: hfa384x_cmd: command was not completed (res=0, entry=caef64c0, type=0, cmd=0x0021, param0=0xfdc6, EVSTAT=8010 INTEN=0000) [ 327.248000] wifi0: interrupt delivery does not seem to work [ 327.248000] wifi0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fdc6, len=12) [ 327.260000] wifi0: hfa384x_cmd_issue: cmd reg was busy for 5000 usec [ 327.260000] wifi0: hfa384x_cmd_issue - timeout - reg=0x8021 [ 327.260000] wifi0: hfa384x_cmd: entry still in list? (entry=caef64c0, type=0, res=-1) [ 327.260000] wifi0: hfa384x_cmd: interrupted; err=-110 [ 327.260000] wifi0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fdc6, len=12) [ 327.292000] ACPI: PCI interrupt for device 0000:02:02.0 disabled [ 327.292000] hostap_pci: Driver unloaded [ 327.300000] ieee80211_crypt: unregistered algorithm 'NULL' [ 329.712000] PM: suspend-to-disk mode set to 'shutdown' [ 329.712000] swsusp: Basic memory bitmaps created [ 329.712000] Stopping tasks ... done. [ 329.724000] Shrinking memory... -\|/-done (42270 pages freed) [ 330.820000] Freed 169080 kbytes in 1.09 seconds (155.11 MB/s) [ 330.820000] Suspending console(s) [ 331.024000] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 331.076000] usb_device usbdev3.1: PM: suspend 0->1, parent usb3 already 2 [ 331.076000] usb_endpoint usbdev3.1_ep81: PM: suspend 0->1, parent 3-0:1.0 already 2 [ 331.076000] hub 3-0:1.0: PM: suspend 2->1, parent usb3 already 2 [ 331.076000] usb_endpoint usbdev3.1_ep00: PM: suspend 0->1, parent usb3 already 2 [ 331.076000] usb_device usbdev2.1: PM: suspend 0->1, parent usb2 already 2 [ 331.076000] usb_endpoint usbdev2.1_ep81: PM: suspend 0->1, parent 2-0:1.0 already 2 [ 331.076000] hub 2-0:1.0: PM: suspend 2->1, parent usb2 already 2 [ 331.076000] usb_endpoint usbdev2.1_ep00: PM: suspend 0->1, parent usb2 already 2 [ 331.076000] usb_device usbdev1.1: PM: suspend 0->1, parent usb1 already 2 [ 331.076000] usb_endpoint usbdev1.1_ep81: PM: suspend 0->1, parent 1-0:1.0 already 2 [ 331.076000] hub 1-0:1.0: PM: suspend 2->1, parent usb1 already 2 [ 331.076000] usb_endpoint usbdev1.1_ep00: PM: suspend 0->1, parent usb1 already 2 [ 331.076000] pnp: Device 00:0c disabled. [ 331.076000] pnp: Device 00:0b disabled. [ 331.076000] pnp: Device 00:0a disabled. [ 331.076000] ACPI: PCI interrupt for device 0000:00:1f.6 disabled [ 331.076000] ACPI: PCI interrupt for device 0000:00:1f.5 disabled [ 331.076000] ACPI: PCI interrupt for device 0000:00:1f.1 disabled [ 331.076000] ACPI: PCI interrupt for device 0000:00:1d.2 disabled [ 331.076000] ACPI: PCI interrupt for device 0000:00:1d.1 disabled [ 331.076000] ACPI: PCI interrupt for device 0000:00:1d.0 disabled [ 331.076000] Disabling non-boot CPUs ... [ 331.076000] PM: snapshotting memory. [ 331.076000] swsusp: critical section: [ 331.076000] swsusp: Need to copy 61006 pages [ 331.076000] swsusp: Normal pages needed: 61006 + 1024 + 14, available pages: 69916 [ 331.076000] PM: Image restored successfully. [ 331.076000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 331.076000] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 331.076000] usb usb1: root hub lost power or was reset [ 331.076000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 [ 331.076000] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 331.076000] usb usb2: root hub lost power or was reset [ 331.076000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 331.076000] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 331.076000] usb usb3: root hub lost power or was reset [ 331.076000] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 331.076000] PM: Writing back config space on device 0000:00:1f.1 at offset 1 (was 2800003, writing 2800007) [ 331.076000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 331.076000] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 331.076000] PM: Writing back config space on device 0000:00:1f.5 at offset 1 (was 2800000, writing 2800001) [ 331.076000] ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 331.076000] PCI: Setting latency timer of device 0000:00:1f.5 to 64 [ 331.256000] ata1.00: configured for UDMA/100 [ 331.256000] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 331.256000] sd 0:0:0:0: [sda] Write Protect is off [ 331.256000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 331.256000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 331.404000] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 failed (Emask=0x1 Stat=0x51 Err=0x04) [ 331.408000] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 failed (Emask=0x1 Stat=0x51 Err=0x04) [ 331.408000] ata2.00: revalidation failed (errno=-5) [ 331.408000] ata2: failed to recover some devices, retrying in 5 secs [ 332.088000] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 332.088000] PCI: Setting latency timer of device 0000:00:1f.6 to 64 [ 333.092000] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 333.092000] PM: Writing back config space on device 0000:02:00.0 at offset f (was 3c0010b, writing 5c0010b) [ 333.092000] PM: Writing back config space on device 0000:02:00.0 at offset 3 (was 824008, writing 82a820) [ 333.092000] PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 2100107, writing 2100007) [ 333.092000] PM: Writing back config space on device 0000:02:00.1 at offset f (was 3c0020b, writing 5c0020b) [ 333.092000] PM: Writing back config space on device 0000:02:00.1 at offset 3 (was 824008, writing 82a820) [ 333.092000] PM: Writing back config space on device 0000:02:00.1 at offset 1 (was 2100107, writing 2100007) [ 333.092000] PM: Writing back config space on device 0000:02:02.0 at offset 1 (was 2900117, writing 2900113) [ 333.092000] pnp: Device 00:0a activated. [ 333.092000] pnp: Device 00:0b activated. [ 333.096000] pnp: Device 00:0c activated. [ 333.432000] sd 0:0:0:0: [sda] Starting disk [ 333.460000] Restarting tasks ... done. [ 333.492000] swsusp: Basic memory bitmaps freed [ 336.740000] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 failed (Emask=0x1 Stat=0x51 Err=0x04) [ 336.744000] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 failed (Emask=0x1 Stat=0x51 Err=0x04) [ 336.744000] ata2.00: ACPI on devcfg failed the second time, disabling (errno=-5) [ 336.744000] ata2.00: revalidation failed (errno=1) [ 336.744000] ata2: failed to recover some devices, retrying in 5 secs [ 339.008000] e100: Intel(R) PRO/100 Network Driver, 3.5.17-k4-NAPI [ 339.008000] e100: Copyright(c) 1999-2006 Intel Corporation [ 339.012000] PCI: Enabling device 0000:02:08.0 (0000 -> 0003) [ 339.012000] ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11 [ 339.012000] PCI: Setting latency timer of device 0000:02:08.0 to 64 [ 339.040000] e100: eth0: e100_probe: addr 0xc0200000, irq 11, MAC addr 00:D0:59:83:D9:AC [ 339.092000] ieee80211_crypt: registered algorithm 'NULL' [ 339.176000] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 339.176000] bridge-eth0: enabling the bridge [ 339.176000] bridge-eth0: up [ 339.216000] hostap_pci: 0.4.4-kernel (Jouni Malinen ) [ 339.216000] ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 339.216000] hostap_pci: Registered netdevice wifi0 [ 339.216000] wifi0: Original COR value: 0x0 [ 339.416000] prism2_hw_init: initialized in 196 ms [ 339.420000] wifi0: NIC: id=0x8013 v1.0.0 [ 339.420000] wifi0: PRI: id=0x15 v1.1.0 [ 339.420000] wifi0: STA: id=0x1f v1.7.4 [ 339.424000] wifi0: Intersil Prism2.5 PCI: mem=0xec000000, irq=11 [ 339.424000] wifi0: registered netdevice wlan0 [ 339.504000] ADDRCONF(NETDEV_UP): wifi0: link is not ready [ 339.504000] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 339.504000] bridge-wlan0: enabling the bridge [ 339.504000] bridge-wlan0: up [ 339.576000] wifi0: LinkStatus=2 (Disconnected) [ 339.576000] wifi0: LinkStatus: BSSID=44:44:44:44:44:44 [ 340.176000] wifi0: LinkStatus=1 (Connected) [ 340.200000] wifi0: LinkStatus: BSSID=00:14:bf:38:8a:54 [ 340.200000] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 340.200000] ADDRCONF(NETDEV_CHANGE): wifi0: link becomes ready [ 341.804000] input: Power Button (FF) as /class/input/input8 [ 341.804000] ACPI: Power Button (FF) [PWRF] [ 341.808000] input: Lid Switch as /class/input/input9 [ 341.808000] ACPI: Lid Switch [LID] [ 341.808000] input: Sleep Button (CM) as /class/input/input10 [ 341.808000] ACPI: Sleep Button (CM) [SLPB] [ 342.240000] ata2.00: configured for UDMA/33 [ 343.024000] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 343.032000] ACPI: Thermal Zone [THM0] (49 C) [ 343.192000] thinkpad_acpi: ThinkPad ACPI Extras v0.14 [ 343.192000] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 343.192000] thinkpad_acpi: ThinkPad EC firmware 1AHT23WW-1.06a [ 343.208000] thinkpad_acpi: another device driver is already handling bay events [ 343.208000] thinkpad_acpi: disabling subdriver bay [ 343.392000] ACPI: AC Adapter [AC] (off-line) [ 343.452000] ACPI: Battery Slot [BAT0] (battery present) [ 350.576000] wlan0: no IPv6 routers present [ 354.196000] bridge-eth0: disabling the bridge [ 354.208000] bridge-eth0: down [ 354.288000] bridge-wlan0: disabling the bridge [ 354.300000] bridge-wlan0: down [ 354.832000] ACPI: PCI interrupt for device 0000:02:08.0 disabled [ 354.864000] wifi0: Original COR value: 0x0 [ 356.984000] wifi0: hfa384x_cmd: entry still in list? (entry=d3cd47c0, type=0, res=0) [ 356.984000] wifi0: hfa384x_cmd: command was not completed (res=0, entry=d3cd47c0, type=0, cmd=0x0021, param0=0xfdc6, EVSTAT=8010 INTEN=0000) [ 356.984000] wifi0: interrupt delivery does not seem to work [ 356.984000] wifi0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fdc6, len=12) [ 358.984000] wifi0: hfa384x_cmd: entry still in list? (entry=d3cd47c0, type=0, res=0) [ 358.984000] wifi0: hfa384x_cmd: command was not completed (res=0, entry=d3cd47c0, type=0, cmd=0x0021, param0=0xfdc6, EVSTAT=8010 INTEN=0000) [ 358.984000] wifi0: interrupt delivery does not seem to work [ 358.984000] wifi0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fdc6, len=12) [ 358.996000] wifi0: hfa384x_cmd_issue: cmd reg was busy for 5000 usec [ 358.996000] wifi0: hfa384x_cmd_issue - timeout - reg=0x8021 [ 358.996000] wifi0: hfa384x_cmd: entry still in list? (entry=d3cd47c0, type=0, res=-1) [ 358.996000] wifi0: hfa384x_cmd: interrupted; err=-110 [ 358.996000] wifi0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fdc6, len=12) [ 359.024000] ACPI: PCI interrupt for device 0000:02:02.0 disabled [ 359.024000] hostap_pci: Driver unloaded [ 359.192000] ieee80211_crypt: unregistered algorithm 'NULL' [ 361.664000] PM: Preparing system for mem sleep [ 361.664000] Stopping tasks ... done. [ 361.672000] Suspending console(s) [ 361.672000] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 361.880000] sd 0:0:0:0: [sda] Stopping disk [ 362.304000] usb_device usbdev3.1: PM: suspend 0->2, parent usb3 already 2 [ 362.304000] usb_endpoint usbdev3.1_ep81: PM: suspend 0->2, parent 3-0:1.0 already 2 [ 362.304000] hub 3-0:1.0: PM: suspend 2->2, parent usb3 already 2 [ 362.304000] usb_endpoint usbdev3.1_ep00: PM: suspend 0->2, parent usb3 already 2 [ 362.304000] usb_device usbdev2.1: PM: suspend 0->2, parent usb2 already 2 [ 362.304000] usb_endpoint usbdev2.1_ep81: PM: suspend 0->2, parent 2-0:1.0 already 2 [ 362.304000] hub 2-0:1.0: PM: suspend 2->2, parent usb2 already 2 [ 362.304000] usb_endpoint usbdev2.1_ep00: PM: suspend 0->2, parent usb2 already 2 [ 362.304000] usb_device usbdev1.1: PM: suspend 0->2, parent usb1 already 2 [ 362.304000] usb_endpoint usbdev1.1_ep81: PM: suspend 0->2, parent 1-0:1.0 already 2 [ 362.304000] hub 1-0:1.0: PM: suspend 2->2, parent usb1 already 2 [ 362.304000] usb_endpoint usbdev1.1_ep00: PM: suspend 0->2, parent usb1 already 2 [ 362.976000] pnp: Device 00:0c disabled. [ 362.976000] pnp: Device 00:0b disabled. [ 362.976000] pnp: Device 00:0a disabled. [ 362.976000] ACPI: PCI interrupt for device 0000:00:1f.6 disabled [ 362.976000] ACPI: PCI interrupt for device 0000:00:1f.5 disabled [ 362.976000] ACPI: PCI interrupt for device 0000:00:1f.1 disabled [ 362.976000] pci_set_power_state(): 0000:00:1f.1: state=3, current state=5 [ 362.976000] ACPI: PCI interrupt for device 0000:00:1d.2 disabled [ 362.976000] ACPI: PCI interrupt for device 0000:00:1d.1 disabled [ 362.976000] ACPI: PCI interrupt for device 0000:00:1d.0 disabled [ 364.720000] Disabling non-boot CPUs ... [ 364.720000] PM: Entering mem sleep [ 364.720000] Back to C! [ 364.720000] PM: Finishing wakeup. [ 364.720000] PM: Writing back config space on device 0000:00:01.0 at offset 7 (was 2a000f0, writing 22a000f0) [ 364.720000] PCI: Enabling device 0000:00:1d.0 (0000 -> 0001) [ 364.720000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 364.720000] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 364.720000] PM: Writing back config space on device 0000:00:1d.0 at offset f (was 100, writing 10b) [ 364.720000] PM: Writing back config space on device 0000:00:1d.0 at offset 8 (was 1, writing 1801) [ 364.720000] usb usb1: root hub lost power or was reset [ 364.720000] PCI: Enabling device 0000:00:1d.1 (0000 -> 0001) [ 364.720000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 [ 364.720000] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 364.720000] PM: Writing back config space on device 0000:00:1d.1 at offset f (was 200, writing 20b) [ 364.720000] PM: Writing back config space on device 0000:00:1d.1 at offset 8 (was 1, writing 1821) [ 364.720000] usb usb2: root hub lost power or was reset [ 364.720000] PCI: Enabling device 0000:00:1d.2 (0000 -> 0001) [ 364.720000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 364.720000] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 364.720000] PM: Writing back config space on device 0000:00:1d.2 at offset f (was 300, writing 30b) [ 364.720000] PM: Writing back config space on device 0000:00:1d.2 at offset 8 (was 1, writing 1841) [ 364.720000] usb usb3: root hub lost power or was reset [ 364.720000] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 364.720000] PM: Writing back config space on device 0000:00:1f.1 at offset 9 (was 0, writing 30000000) [ 364.720000] PM: Writing back config space on device 0000:00:1f.1 at offset 1 (was 2800005, writing 2800007) [ 364.720000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 364.720000] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 364.720000] PM: Writing back config space on device 0000:00:1f.5 at offset 1 (was 2800000, writing 2800001) [ 364.720000] ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 364.720000] PCI: Setting latency timer of device 0000:00:1f.5 to 64 [ 365.228000] ata2.00: configured for UDMA/33 [ 365.732000] PM: Writing back config space on device 0000:00:1f.6 at offset 1 (was 2800000, writing 2800001) [ 365.732000] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 365.732000] PCI: Setting latency timer of device 0000:00:1f.6 to 64 [ 365.852000] ata1.00: configured for UDMA/100 [ 365.852000] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 365.852000] sd 0:0:0:0: [sda] Write Protect is off [ 365.852000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 365.852000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 366.736000] PM: Writing back config space on device 0000:01:00.0 at offset 7 (was 8, writing e0000008) [ 366.736000] PM: Writing back config space on device 0000:01:00.0 at offset 6 (was 8, writing e4000008) [ 366.736000] PM: Writing back config space on device 0000:01:00.0 at offset 5 (was 8, writing e8000008) [ 366.736000] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 366.736000] PM: Writing back config space on device 0000:02:02.0 at offset 1 (was 2900117, writing 2900113) [ 366.736000] PM: Writing back config space on device 0000:02:08.0 at offset 5 (was 1, writing 7001) [ 366.736000] PM: Writing back config space on device 0000:02:08.0 at offset 4 (was 0, writing c0200000) [ 366.736000] PM: Writing back config space on device 0000:02:08.0 at offset 3 (was 0, writing 4000) [ 366.736000] PM: Writing back config space on device 0000:02:08.0 at offset 1 (was 2900000, writing 2900003) [ 366.736000] pnp: Device 00:0a activated. [ 366.736000] pnp: Device 00:0b activated. [ 366.740000] pnp: Device 00:0c activated. [ 367.124000] sd 0:0:0:0: [sda] Starting disk [ 367.132000] Restarting tasks ... done. [ 367.520000] e100: Intel(R) PRO/100 Network Driver, 3.5.17-k4-NAPI [ 367.520000] e100: Copyright(c) 1999-2006 Intel Corporation [ 367.528000] ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11 [ 367.616000] e100: eth0: e100_probe: addr 0xc0200000, irq 11, MAC addr 00:D0:59:83:D9:AC [ 367.656000] ieee80211_crypt: registered algorithm 'NULL' [ 367.684000] hostap_pci: 0.4.4-kernel (Jouni Malinen ) [ 367.688000] ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 367.728000] hostap_pci: Registered netdevice wifi0 [ 367.728000] wifi0: Original COR value: 0x0 [ 367.808000] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 367.808000] bridge-eth0: enabling the bridge [ 367.808000] bridge-eth0: up [ 367.928000] prism2_hw_init: initialized in 196 ms [ 367.928000] wifi0: NIC: id=0x8013 v1.0.0 [ 367.932000] wifi0: PRI: id=0x15 v1.1.0 [ 367.932000] wifi0: STA: id=0x1f v1.7.4 [ 367.936000] wifi0: Intersil Prism2.5 PCI: mem=0xec000000, irq=11 [ 367.984000] wifi0: registered netdevice wlan0 [ 368.080000] ADDRCONF(NETDEV_UP): wifi0: link is not ready [ 368.080000] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 368.080000] bridge-wlan0: enabling the bridge [ 368.080000] bridge-wlan0: up [ 368.160000] wifi0: LinkStatus=2 (Disconnected) [ 368.160000] wifi0: LinkStatus: BSSID=44:44:44:44:44:44 [ 368.804000] wifi0: LinkStatus=1 (Connected) [ 368.804000] wifi0: LinkStatus: BSSID=00:14:bf:38:8a:54 [ 368.804000] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 368.804000] ADDRCONF(NETDEV_CHANGE): wifi0: link becomes ready [ 369.676000] input: Power Button (FF) as /class/input/input11 [ 369.676000] ACPI: Power Button (FF) [PWRF] [ 369.696000] input: Lid Switch as /class/input/input12 [ 369.696000] ACPI: Lid Switch [LID] [ 369.708000] input: Sleep Button (CM) as /class/input/input13 [ 369.708000] ACPI: Sleep Button (CM) [SLPB] [ 371.084000] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 371.096000] ACPI: Thermal Zone [THM0] (51 C) [ 371.208000] thinkpad_acpi: ThinkPad ACPI Extras v0.14 [ 371.208000] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 371.208000] thinkpad_acpi: ThinkPad EC firmware 1AHT23WW-1.06a [ 371.228000] thinkpad_acpi: another device driver is already handling bay events [ 371.228000] thinkpad_acpi: disabling subdriver bay [ 371.364000] ACPI: AC Adapter [AC] (off-line) [ 371.416000] ACPI: Battery Slot [BAT0] (battery present) [ 378.876000] wlan0: no IPv6 routers present