[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.8.0-26-generic (buildd@panlong) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-1ubuntu1) ) #38-Ubuntu SMP Mon Jun 17 21:43:33 UTC 2013 (Ubuntu 3.8.0-26.38-generic 3.8.13.2) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.8.0-26-generic root=UUID=9e350a69-60b1-46b4-be0d-5c2554bf4284 ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x00000000000913ff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000091400-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000007f0afff] usable [ 0.000000] BIOS-e820: [mem 0x0000000007f0b000-0x0000000007f87fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000007f88000-0x0000000007f90fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000007f91000-0x0000000007f96fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000007f97000-0x0000000007f99fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000007f9a000-0x0000000007ffffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000008000000-0x000000000dffcfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000dffd000-0x000000000dffffff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000000e000000-0x000000001fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000c87f0fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000c87f1000-0x00000000c8845fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000c8846000-0x00000000c8848fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000c8849000-0x00000000c884afff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000c884b000-0x00000000ca948fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000ca949000-0x00000000ca94bfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ca94c000-0x00000000ca955fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000ca956000-0x00000000ca95ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ca960000-0x00000000ca969fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000ca96a000-0x00000000ca96dfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ca96e000-0x00000000caffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cb800000-0x00000000cf9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffc1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022dffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Dell Inc. Latitude E6220/0R97MN, BIOS A08 05/17/2012 [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x22e000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FC0000000 write-back [ 0.000000] 2 base 0C0000000 mask FF8000000 write-back [ 0.000000] 3 base 0C8000000 mask FFC000000 write-back [ 0.000000] 4 base 0CB000000 mask FFF000000 uncachable [ 0.000000] 5 base 100000000 mask F00000000 write-back [ 0.000000] 6 base 200000000 mask FE0000000 write-back [ 0.000000] 7 base 220000000 mask FF0000000 write-back [ 0.000000] 8 base 22E000000 mask FFE000000 uncachable [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 3GB, range: 128MB, type WB [ 0.000000] reg 3, base: 3200MB, range: 64MB, type WB [ 0.000000] reg 4, base: 3248MB, range: 16MB, type UC [ 0.000000] reg 5, base: 4GB, range: 4GB, type WB [ 0.000000] reg 6, base: 8GB, range: 512MB, type WB [ 0.000000] reg 7, base: 8704MB, range: 256MB, type WB [ 0.000000] reg 8, base: 8928MB, range: 32MB, type UC [ 0.000000] total RAM covered: 8080M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 64M num_reg: 9 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 3GB, range: 128MB, type WB [ 0.000000] reg 3, base: 3200MB, range: 64MB, type WB [ 0.000000] reg 4, base: 3248MB, range: 16MB, type UC [ 0.000000] reg 5, base: 4GB, range: 4GB, type WB [ 0.000000] reg 6, base: 8GB, range: 512MB, type WB [ 0.000000] reg 7, base: 8704MB, range: 256MB, type WB [ 0.000000] reg 8, base: 8928MB, range: 32MB, type UC [ 0.000000] e820: update [mem 0xcb000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xcb000 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000f1c50-0x000f1c5f] mapped at [ffff8800000f1c50] [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff] [ 0.000000] Base memory trampoline at [ffff88000008b000] 8b000 size 24576 [ 0.000000] reserving inaccessible SNB gfx pages [ 0.000000] init_memory_mapping: [mem 0x00000000-0xcaffffff] [ 0.000000] [mem 0x00000000-0xcaffffff] page 2M [ 0.000000] kernel direct mapping tables up to 0xcaffffff @ [mem 0x1fffb000-0x1fffffff] [ 0.000000] init_memory_mapping: [mem 0x100000000-0x22dffffff] [ 0.000000] [mem 0x100000000-0x22dffffff] page 2M [ 0.000000] kernel direct mapping tables up to 0x22dffffff @ [mem 0xcaffa000-0xcaffffff] [ 0.000000] RAMDISK: [mem 0x3611c000-0x37085fff] [ 0.000000] ACPI: RSDP 00000000000fe300 00024 (v02 DELL ) [ 0.000000] ACPI: XSDT 000000000dffee18 0007C (v01 DELL CBX3 06222004 MSFT 00010013) [ 0.000000] ACPI: FACP 0000000007fa0d98 000F4 (v04 DELL CBX3 06222004 MSFT 00010013) [ 0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20121018/tbfadt-394) [ 0.000000] ACPI BIOS Bug: Warning: 32/64X FACS address mismatch in FADT - 0x07FFDE40/0x0000000007FFDD40, using 32 (20121018/tbfadt-521) [ 0.000000] ACPI: DSDT 0000000007f7f018 0849F (v02 INT430 SYSFexxx 00001001 INTL 20090903) [ 0.000000] ACPI: FACS 0000000007ffde40 00040 [ 0.000000] ACPI: APIC 000000000dffdf18 000CC (v02 DELL CBX3 06222004 MSFT 00010013) [ 0.000000] ACPI: TCPA 0000000007ffed18 00032 (v02 00000000 00000000) [ 0.000000] ACPI: SSDT 0000000007fa1a98 002F9 (v01 DELLTP TPM 00003000 INTL 20090903) [ 0.000000] ACPI: MCFG 0000000007ffec98 0003C (v01 DELL SNDYBRDG 06222004 MSFT 00000097) [ 0.000000] ACPI: HPET 0000000007ffec18 00038 (v01 A M I PCHHPET 06222004 AMI. 00000003) [ 0.000000] ACPI: BOOT 0000000007ffeb98 00028 (v01 DELL CBX3 06222004 AMI 00010013) [ 0.000000] ACPI: SSDT 0000000007f96018 00804 (v01 PmRef Cpu0Ist 00003000 INTL 20090903) [ 0.000000] ACPI: SSDT 0000000007f95018 00996 (v01 PmRef CpuPm 00003000 INTL 20090903) [ 0.000000] ACPI: DMAR 0000000007fa0c18 000E8 (v01 INTEL SNB 00000001 INTL 00000001) [ 0.000000] ACPI: SLIC 0000000007f9fc18 00176 (v03 DELL CBX3 06222004 MSFT 00010013) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000022dffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x22dffffff] [ 0.000000] NODE_DATA [mem 0x22dffb000-0x22dffffff] [ 0.000000] [ffffea0000000000-ffffea0008bfffff] PMD -> [ffff880225600000-ffff88022d5fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00010000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x22dffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00010000-0x00090fff] [ 0.000000] node 0: [mem 0x00100000-0x07f0afff] [ 0.000000] node 0: [mem 0x07f88000-0x07f90fff] [ 0.000000] node 0: [mem 0x07f97000-0x07f99fff] [ 0.000000] node 0: [mem 0x08000000-0x0dffcfff] [ 0.000000] node 0: [mem 0x0e000000-0x1fffffff] [ 0.000000] node 0: [mem 0x20200000-0x3fffffff] [ 0.000000] node 0: [mem 0x40200000-0xc87f0fff] [ 0.000000] node 0: [mem 0xc8846000-0xc8848fff] [ 0.000000] node 0: [mem 0xc884b000-0xca948fff] [ 0.000000] node 0: [mem 0xca94c000-0xca955fff] [ 0.000000] node 0: [mem 0xca960000-0xca969fff] [ 0.000000] node 0: [mem 0xca96e000-0xcaffffff] [ 0.000000] node 0: [mem 0x100000000-0x22dffffff] [ 0.000000] On node 0 totalpages: 2066989 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 129 pages reserved [ 0.000000] DMA zone: 3776 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 12907 pages used for memmap [ 0.000000] DMA32 zone: 813121 pages, LIFO batch:31 [ 0.000000] Normal zone: 19328 pages used for memmap [ 0.000000] Normal zone: 1217664 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x08] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x09] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0a] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0b] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0c] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0d] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0e] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x0f] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 16 CPUs, 12 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 0000000000091000 - 0000000000092000 [ 0.000000] PM: Registered nosave memory: 0000000000092000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 0000000007f0b000 - 0000000007f88000 [ 0.000000] PM: Registered nosave memory: 0000000007f91000 - 0000000007f97000 [ 0.000000] PM: Registered nosave memory: 0000000007f9a000 - 0000000008000000 [ 0.000000] PM: Registered nosave memory: 000000000dffd000 - 000000000e000000 [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000 [ 0.000000] PM: Registered nosave memory: 0000000040000000 - 0000000040200000 [ 0.000000] PM: Registered nosave memory: 00000000c87f1000 - 00000000c8846000 [ 0.000000] PM: Registered nosave memory: 00000000c8849000 - 00000000c884b000 [ 0.000000] PM: Registered nosave memory: 00000000ca949000 - 00000000ca94c000 [ 0.000000] PM: Registered nosave memory: 00000000ca956000 - 00000000ca960000 [ 0.000000] PM: Registered nosave memory: 00000000ca96a000 - 00000000ca96e000 [ 0.000000] PM: Registered nosave memory: 00000000cb000000 - 00000000cb800000 [ 0.000000] PM: Registered nosave memory: 00000000cb800000 - 00000000cfa00000 [ 0.000000] PM: Registered nosave memory: 00000000cfa00000 - 00000000fed1c000 [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000 [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000ffc00000 [ 0.000000] PM: Registered nosave memory: 00000000ffc00000 - 00000000ffc20000 [ 0.000000] PM: Registered nosave memory: 00000000ffc20000 - 0000000100000000 [ 0.000000] e820: [mem 0xcfa00000-0xfed1bfff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:16 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88022dc00000 s85056 r8192 d21440 u131072 [ 0.000000] pcpu-alloc: s85056 r8192 d21440 u131072 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2034561 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.8.0-26-generic root=UUID=9e350a69-60b1-46b4-be0d-5c2554bf4284 ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 8036912k/9142272k available (7010k kernel code, 874316k absent, 231044k reserved, 6232k data, 996k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=16. [ 0.000000] NR_IRQS:16640 nr_irqs:808 16 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 33554432 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.004000] tsc: Detected 2494.406 MHz processor [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.81 BogoMIPS (lpj=9977624) [ 0.000005] pid_max: default: 32768 minimum: 301 [ 0.000028] Security Framework initialized [ 0.000039] AppArmor: AppArmor initialized [ 0.000040] Yama: becoming mindful. [ 0.000544] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.002100] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.002767] Mount-cache hash table entries: 256 [ 0.002922] Initializing cgroup subsys cpuacct [ 0.002924] Initializing cgroup subsys memory [ 0.002930] Initializing cgroup subsys devices [ 0.002931] Initializing cgroup subsys freezer [ 0.002933] Initializing cgroup subsys blkio [ 0.002934] Initializing cgroup subsys perf_event [ 0.002936] Initializing cgroup subsys hugetlb [ 0.002958] CPU: Physical Processor ID: 0 [ 0.002959] CPU: Processor Core ID: 0 [ 0.002963] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.002963] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.002965] mce: CPU supports 7 MCE banks [ 0.002976] CPU0: Thermal monitoring enabled (TM1) [ 0.002982] process: using mwait in idle threads [ 0.002986] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0 [ 0.002986] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32 [ 0.002986] tlb_flushall_shift: 5 [ 0.003122] Freeing SMP alternatives: 24k freed [ 0.005557] ACPI: Core revision 20121018 [ 0.010684] ftrace: allocating 26697 entries in 105 pages [ 0.023546] dmar: Host address width 36 [ 0.023549] dmar: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.023556] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a [ 0.023557] dmar: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.023562] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a [ 0.023563] dmar: RMRR base: 0x000000c8836000 end: 0x000000c8845fff [ 0.023565] dmar: RMRR base: 0x000000cb800000 end: 0x000000cf9fffff [ 0.023635] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.023636] HPET id 0 under DRHD base 0xfed91000 [ 0.023637] HPET id 0 under DRHD base 0xfed91000 [ 0.023638] HPET id 0 under DRHD base 0xfed91000 [ 0.023639] HPET id 0 under DRHD base 0xfed91000 [ 0.023640] HPET id 0 under DRHD base 0xfed91000 [ 0.023641] HPET id 0 under DRHD base 0xfed91000 [ 0.023642] HPET id 0 under DRHD base 0xfed91000 [ 0.023643] HPET id 0 under DRHD base 0xfed91000 [ 0.023819] Enabled IRQ remapping in x2apic mode [ 0.023821] Enabling x2apic [ 0.023821] Enabled x2apic [ 0.023828] Switched APIC routing to cluster x2apic. [ 0.024279] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.063912] smpboot: CPU0: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz (fam: 06, model: 2a, stepping: 07) [ 0.063921] TSC deadline timer enabled [ 0.063925] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver. [ 0.063931] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode [ 0.063933] ... version: 3 [ 0.063934] ... bit width: 48 [ 0.063935] ... generic registers: 4 [ 0.063936] ... value mask: 0000ffffffffffff [ 0.063937] ... max period: 000000007fffffff [ 0.063938] ... fixed-purpose events: 3 [ 0.063939] ... event mask: 000000070000000f [ 0.078019] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.064870] smpboot: Booting Node 0, Processors #1 #2 #3 [ 0.104239] Brought up 4 CPUs [ 0.104243] smpboot: Total of 4 processors activated (19955.24 BogoMIPS) [ 0.107432] devtmpfs: initialized [ 0.108346] EVM: security.selinux [ 0.108348] EVM: security.SMACK64 [ 0.108349] EVM: security.capability [ 0.108390] PM: Registering ACPI NVS region [mem 0x07f0b000-0x07f87fff] (512000 bytes) [ 0.108398] PM: Registering ACPI NVS region [mem 0x07f91000-0x07f96fff] (24576 bytes) [ 0.108399] PM: Registering ACPI NVS region [mem 0x07f9a000-0x07ffffff] (417792 bytes) [ 0.108410] reboot: PCI series board detected. Selecting Dell Latitude E6220-method for reboots. [ 0.109089] regulator-dummy: no parameters [ 0.109133] NET: Registered protocol family 16 [ 0.109260] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.109261] ACPI: bus type pci registered [ 0.109324] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.109326] PCI: not using MMCONFIG [ 0.109328] PCI: Using configuration type 1 for base access [ 0.109334] dmi type 0xB1 record - unknown flag [ 0.110105] bio: create slab at 0 [ 0.110181] ACPI: Added _OSI(Module Device) [ 0.110183] ACPI: Added _OSI(Processor Device) [ 0.110184] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.110185] ACPI: Added _OSI(Processor Aggregator Device) [ 0.111431] ACPI: EC: Look up EC in DSDT [ 0.114847] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.137128] ACPI: SSDT 00000000ca94a798 00727 (v01 PmRef Cpu0Cst 00003001 INTL 20090903) [ 0.137449] ACPI: Dynamic OEM Table Load: [ 0.137451] ACPI: SSDT (null) 00727 (v01 PmRef Cpu0Cst 00003001 INTL 20090903) [ 0.137674] ACPI: SSDT 00000000ca94ba98 00303 (v01 PmRef ApIst 00003000 INTL 20090903) [ 0.138026] ACPI: Dynamic OEM Table Load: [ 0.138028] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20090903) [ 0.138131] ACPI: SSDT 00000000ca949d98 00119 (v01 PmRef ApCst 00003000 INTL 20090903) [ 0.138445] ACPI: Dynamic OEM Table Load: [ 0.138447] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20090903) [ 0.146871] ACPI: Interpreter enabled [ 0.146874] ACPI: (supports S0 S3 S4 S5) [ 0.146890] ACPI: Using IOAPIC for interrupt routing [ 0.146908] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.147247] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources [ 0.170616] ACPI: EC: GPE = 0x10, I/O: command/status = 0x934, data = 0x930 [ 0.171368] ACPI: No dock devices found. [ 0.171373] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.171598] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.171600] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.171718] \_SB_.PCI0:_OSC invalid UUID [ 0.171719] _OSC request data:1 8 0 [ 0.172165] PCI host bridge to bus 0000:00 [ 0.172168] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.172170] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.172172] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.172174] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.172175] pci_bus 0000:00: root bus resource [mem 0xcfa00000-0xfeafffff] [ 0.172177] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff] [ 0.172185] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000 [ 0.172222] pci 0000:00:02.0: [8086:0126] type 00 class 0x030000 [ 0.172232] pci 0000:00:02.0: reg 10: [mem 0xe0c00000-0xe0ffffff 64bit] [ 0.172238] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.172242] pci 0000:00:02.0: reg 20: [io 0x3000-0x303f] [ 0.172296] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000 [ 0.172320] pci 0000:00:16.0: reg 10: [mem 0xe1cb0000-0xe1cb000f 64bit] [ 0.172398] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.172431] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000 [ 0.172450] pci 0000:00:19.0: reg 10: [mem 0xe1c00000-0xe1c1ffff] [ 0.172459] pci 0000:00:19.0: reg 14: [mem 0xe1c80000-0xe1c80fff] [ 0.172467] pci 0000:00:19.0: reg 18: [io 0x3080-0x309f] [ 0.172533] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.172559] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 [ 0.172580] pci 0000:00:1a.0: reg 10: [mem 0xe1c70000-0xe1c703ff] [ 0.172671] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.172699] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300 [ 0.172715] pci 0000:00:1b.0: reg 10: [mem 0xe1c60000-0xe1c63fff 64bit] [ 0.172785] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.172813] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 [ 0.172940] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.172976] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400 [ 0.173102] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.173140] pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400 [ 0.173267] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.173305] pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400 [ 0.173391] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.173425] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 [ 0.173447] pci 0000:00:1d.0: reg 10: [mem 0xe1c50000-0xe1c503ff] [ 0.173537] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.173565] pci 0000:00:1f.0: [8086:1c4f] type 00 class 0x060100 [ 0.173690] pci 0000:00:1f.2: [8086:282a] type 00 class 0x010400 [ 0.173709] pci 0000:00:1f.2: reg 10: [io 0x30d0-0x30d7] [ 0.173718] pci 0000:00:1f.2: reg 14: [io 0x30c0-0x30c3] [ 0.173726] pci 0000:00:1f.2: reg 18: [io 0x30b0-0x30b7] [ 0.173734] pci 0000:00:1f.2: reg 1c: [io 0x30a0-0x30a3] [ 0.173742] pci 0000:00:1f.2: reg 20: [io 0x3060-0x307f] [ 0.173751] pci 0000:00:1f.2: reg 24: [mem 0xe1c40000-0xe1c407ff] [ 0.173797] pci 0000:00:1f.2: PME# supported from D3hot [ 0.173816] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 [ 0.173832] pci 0000:00:1f.3: reg 10: [mem 0xe1c30000-0xe1c300ff 64bit] [ 0.173854] pci 0000:00:1f.3: reg 20: [io 0x3040-0x305f] [ 0.173957] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.174203] pci 0000:02:00.0: [8086:0082] type 00 class 0x028000 [ 0.174351] pci 0000:02:00.0: reg 10: [mem 0xe1b00000-0xe1b01fff 64bit] [ 0.175068] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.182051] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 0.182060] pci 0000:00:1c.1: bridge window [mem 0xe1b00000-0xe1bfffff] [ 0.182138] pci 0000:00:1c.2: PCI bridge to [bus 03-08] [ 0.182143] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff] [ 0.182148] pci 0000:00:1c.2: bridge window [mem 0xe1000000-0xe19fffff] [ 0.182156] pci 0000:00:1c.2: bridge window [mem 0xe0000000-0xe09fffff 64bit pref] [ 0.182254] pci 0000:09:00.0: [1217:8221] type 00 class 0x080501 [ 0.182293] pci 0000:09:00.0: reg 10: [mem 0xe1a20000-0xe1a201ff] [ 0.182593] pci 0000:09:00.0: supports D1 D2 [ 0.182594] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.182694] pci 0000:09:00.1: [1217:8231] type 00 class 0x018000 [ 0.182735] pci 0000:09:00.1: reg 10: [mem 0xe1a10000-0xe1a10fff] [ 0.182787] pci 0000:09:00.1: reg 18: [mem 0xe1a00000-0xe1a007ff] [ 0.183032] pci 0000:09:00.1: supports D1 D2 [ 0.183033] pci 0000:09:00.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.189984] pci 0000:00:1c.5: PCI bridge to [bus 09] [ 0.189999] pci 0000:00:1c.5: bridge window [mem 0xe1a00000-0xe1afffff] [ 0.190060] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.190090] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 0.190118] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT] [ 0.190153] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] [ 0.190215] \_SB_.PCI0:_OSC invalid UUID [ 0.190216] _OSC request data:1 1f 0 [ 0.190219] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM [ 0.190221] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08) [ 0.190785] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 0.190822] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 0.190857] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 0.190892] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. [ 0.190926] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 *5 6 7 10 12 14 15) [ 0.190961] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. [ 0.190998] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 7 10 12 14 15) [ 0.191032] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. [ 0.191119] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.191123] vgaarb: loaded [ 0.191124] vgaarb: bridge control possible 0000:00:02.0 [ 0.191256] SCSI subsystem initialized [ 0.191258] ACPI: bus type scsi registered [ 0.191295] libata version 3.00 loaded. [ 0.191308] ACPI: bus type usb registered [ 0.191322] usbcore: registered new interface driver usbfs [ 0.191328] usbcore: registered new interface driver hub [ 0.191345] usbcore: registered new device driver usb [ 0.191413] PCI: Using ACPI for IRQ routing [ 0.193047] PCI: pci_cache_line_size set to 64 bytes [ 0.193170] e820: reserve RAM buffer [mem 0x00091400-0x0009ffff] [ 0.193172] e820: reserve RAM buffer [mem 0x07f0b000-0x07ffffff] [ 0.193174] e820: reserve RAM buffer [mem 0x07f91000-0x07ffffff] [ 0.193175] e820: reserve RAM buffer [mem 0x07f9a000-0x07ffffff] [ 0.193176] e820: reserve RAM buffer [mem 0x0dffd000-0x0fffffff] [ 0.193178] e820: reserve RAM buffer [mem 0xc87f1000-0xcbffffff] [ 0.193180] e820: reserve RAM buffer [mem 0xc8849000-0xcbffffff] [ 0.193182] e820: reserve RAM buffer [mem 0xca949000-0xcbffffff] [ 0.193184] e820: reserve RAM buffer [mem 0xca956000-0xcbffffff] [ 0.193185] e820: reserve RAM buffer [mem 0xca96a000-0xcbffffff] [ 0.193187] e820: reserve RAM buffer [mem 0xcb000000-0xcbffffff] [ 0.193188] e820: reserve RAM buffer [mem 0x22e000000-0x22fffffff] [ 0.193262] NetLabel: Initializing [ 0.193263] NetLabel: domain hash size = 128 [ 0.193264] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.193272] NetLabel: unlabeled traffic allowed by default [ 0.193321] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.193326] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.196339] Switching to clocksource hpet [ 0.200727] AppArmor: AppArmor Filesystem Enabled [ 0.200749] pnp: PnP ACPI init [ 0.200760] ACPI: bus type pnp registered [ 0.200795] pnp 00:00: [dma 4] [ 0.200813] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.200828] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active) [ 0.200927] system 00:02: [mem 0xfed00000-0xfed003ff] has been reserved [ 0.200930] system 00:02: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) [ 0.200958] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.200988] system 00:04: [io 0x0680-0x069f] has been reserved [ 0.200990] system 00:04: [io 0x1000-0x100f] has been reserved [ 0.200992] system 00:04: [io 0xffff] has been reserved [ 0.200994] system 00:04: [io 0xffff] has been reserved [ 0.200995] system 00:04: [io 0x0400-0x047f] has been reserved [ 0.200997] system 00:04: [io 0x0500-0x057f] has been reserved [ 0.200999] system 00:04: [io 0x164e-0x164f] has been reserved [ 0.201001] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.201022] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.201045] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.202013] pnp 00:07: Plug and Play ACPI device, IDs PNP0401 (disabled) [ 0.202036] pnp 00:08: Plug and Play ACPI device, IDs DLL04a9 PNP0f13 (active) [ 0.202175] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.202177] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.202179] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.202181] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.202182] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.202184] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.202186] system 00:09: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.202188] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.202190] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved [ 0.202192] system 00:09: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.202194] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.202597] pnp 00:0a: Plug and Play ACPI device, IDs SMO8800 (active) [ 0.204585] system 00:0b: [mem 0x20000000-0x201fffff] has been reserved [ 0.204588] system 00:0b: [mem 0x40000000-0x401fffff] has been reserved [ 0.204591] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.204599] pnp: PnP ACPI: found 12 devices [ 0.204601] ACPI: ACPI bus type pnp unregistered [ 0.210548] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.210567] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 0.210574] pci 0000:00:1c.1: bridge window [mem 0xe1b00000-0xe1bfffff] [ 0.210586] pci 0000:00:1c.2: PCI bridge to [bus 03-08] [ 0.210589] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff] [ 0.210596] pci 0000:00:1c.2: bridge window [mem 0xe1000000-0xe19fffff] [ 0.210601] pci 0000:00:1c.2: bridge window [mem 0xe0000000-0xe09fffff 64bit pref] [ 0.210609] pci 0000:00:1c.5: PCI bridge to [bus 09] [ 0.210615] pci 0000:00:1c.5: bridge window [mem 0xe1a00000-0xe1afffff] [ 0.210664] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.210666] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.210668] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.210670] pci_bus 0000:00: resource 7 [mem 0xcfa00000-0xfeafffff] [ 0.210671] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff] [ 0.210673] pci_bus 0000:02: resource 1 [mem 0xe1b00000-0xe1bfffff] [ 0.210675] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff] [ 0.210677] pci_bus 0000:03: resource 1 [mem 0xe1000000-0xe19fffff] [ 0.210679] pci_bus 0000:03: resource 2 [mem 0xe0000000-0xe09fffff 64bit pref] [ 0.210680] pci_bus 0000:09: resource 1 [mem 0xe1a00000-0xe1afffff] [ 0.210708] NET: Registered protocol family 2 [ 0.210871] TCP established hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.211060] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.211181] TCP: Hash tables configured (established 65536 bind 65536) [ 0.211201] TCP: reno registered [ 0.211213] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.211240] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.211316] NET: Registered protocol family 1 [ 0.211328] pci 0000:00:02.0: Boot video device [ 0.211465] PCI: CLS 64 bytes, default 64 [ 0.211507] Trying to unpack rootfs image as initramfs... [ 0.453139] Freeing initrd memory: 15784k freed [ 0.454938] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.454943] software IO TLB [mem 0xc47f1000-0xc87f1000] (64MB) mapped at [ffff8800c47f1000-ffff8800c87f0fff] [ 0.454977] Simple Boot Flag at 0xf3 set to 0x1 [ 0.455311] Initialise module verification [ 0.455351] audit: initializing netlink socket (disabled) [ 0.455360] type=2000 audit(1372533204.448:1): initialized [ 0.481531] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.482754] VFS: Disk quotas dquot_6.5.2 [ 0.482792] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.483175] fuse init (API version 7.20) [ 0.483238] msgmni has been set to 15727 [ 0.483580] Key type asymmetric registered [ 0.483583] Asymmetric key parser 'x509' registered [ 0.483608] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.483629] io scheduler noop registered [ 0.483632] io scheduler deadline registered (default) [ 0.483636] io scheduler cfq registered [ 0.483931] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.483941] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.483971] intel_idle: MWAIT substates: 0x21120 [ 0.483972] intel_idle: v0.4 model 0x2A [ 0.483973] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.484562] ACPI: AC Adapter [AC] (on-line) [ 0.484690] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 0.485217] ACPI: Lid Switch [LID] [ 0.485273] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 0.485276] ACPI: Power Button [PBTN] [ 0.485430] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 [ 0.485432] ACPI: Sleep Button [SBTN] [ 0.485458] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 0.485460] ACPI: Power Button [PWRF] [ 0.485510] ACPI: Requesting acpi_cpufreq [ 0.497842] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.497845] ACPI: Thermal Zone [THM] (25 C) [ 0.497866] GHES: HEST is not enabled! [ 0.497934] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.500354] Linux agpgart interface v0.103 [ 0.501786] brd: module loaded [ 0.502521] loop: module loaded [ 0.502829] libphy: Fixed MDIO Bus: probed [ 0.502871] tun: Universal TUN/TAP device driver, 1.6 [ 0.502873] tun: (C) 1999-2004 Max Krasnyansky [ 0.502923] PPP generic driver version 2.4.2 [ 0.502990] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.502992] ehci-pci: EHCI PCI platform driver [ 0.503029] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 0.503032] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.503037] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.503051] ehci-pci 0000:00:1a.0: debug port 2 [ 0.506540] ACPI: Battery Slot [BAT0] (battery present) [ 0.506949] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 0.506968] ehci-pci 0000:00:1a.0: irq 16, io mem 0xe1c70000 [ 0.515962] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.516014] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.516026] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.516028] usb usb1: Product: EHCI Host Controller [ 0.516029] usb usb1: Manufacturer: Linux 3.8.0-26-generic ehci_hcd [ 0.516031] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.516208] hub 1-0:1.0: USB hub found [ 0.516212] hub 1-0:1.0: 2 ports detected [ 0.532334] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 0.532337] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.532341] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.532353] ehci-pci 0000:00:1d.0: debug port 2 [ 0.536238] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 0.536253] ehci-pci 0000:00:1d.0: irq 17, io mem 0xe1c50000 [ 0.547925] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.547970] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.547983] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.547985] usb usb2: Product: EHCI Host Controller [ 0.547986] usb usb2: Manufacturer: Linux 3.8.0-26-generic ehci_hcd [ 0.547988] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.548101] hub 2-0:1.0: USB hub found [ 0.548104] hub 2-0:1.0: 2 ports detected [ 0.564129] ehci-platform: EHCI generic platform driver [ 0.564135] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.564145] uhci_hcd: USB Universal Host Controller Interface driver [ 0.564189] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.564190] ACPI: Battery Slot [BAT1] (battery absent) [ 0.564661] i8042: Warning: Keylock active [ 0.565896] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.565901] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.565988] mousedev: PS/2 mouse device common for all mice [ 0.566147] rtc_cmos 00:05: RTC can wake from S4 [ 0.566291] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 0.566319] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs [ 0.566400] device-mapper: uevent: version 1.0.3 [ 0.566454] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com [ 0.566525] cpuidle: using governor ladder [ 0.566603] cpuidle: using governor menu [ 0.566609] ledtrig-cpu: registered to indicate activity on CPUs [ 0.566610] EFI Variables Facility v0.08 2004-May-17 [ 0.566776] ashmem: initialized [ 0.566872] TCP: cubic registered [ 0.566911] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 0.566955] NET: Registered protocol family 10 [ 0.567090] NET: Registered protocol family 17 [ 0.567098] Key type dns_resolver registered [ 0.567268] Loading module verification certificates [ 0.568125] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 28bf685926cf24167b29d0d66d07256be256431c' [ 0.568134] registered taskstats version 1 [ 0.570277] Key type trusted registered [ 0.572323] Key type encrypted registered [ 0.574516] rtc_cmos 00:05: setting system clock to 2013-06-29 19:13:25 UTC (1372533205) [ 0.575132] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.575134] EDD information not available. [ 0.576343] Freeing unused kernel memory: 996k freed [ 0.576442] Write protecting the kernel read-only data: 12288k [ 0.578848] Freeing unused kernel memory: 1172k freed [ 0.581032] Freeing unused kernel memory: 1080k freed [ 0.590713] udevd[106]: starting version 175 [ 0.613062] Disabling lock debugging due to kernel taint [ 0.613606] e1000e: Intel(R) PRO/1000 Network Driver - 2.1.4-k [ 0.613607] e1000e: Copyright(c) 1999 - 2012 Intel Corporation. [ 0.613653] e1000e 0000:00:19.0: setting latency timer to 64 [ 0.613722] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 0.613762] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X [ 0.622074] sdhci: Secure Digital Host Controller Interface driver [ 0.622077] sdhci: Copyright(c) Pierre Ossman [ 0.623631] sdhci-pci 0000:09:00.0: SDHCI controller found [1217:8221] (rev 5) [ 0.623746] mmc0: no vqmmc regulator found [ 0.623748] mmc0: no vmmc regulator found [ 0.656957] mmc0: SDHCI controller on PCI [0000:09:00.0] using DMA [ 0.843629] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 0.870610] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 24:b6:fd:fc:96:96 [ 0.870613] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 0.870652] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 9041FF-0FF [ 0.870691] ahci 0000:00:1f.2: version 3.0 [ 0.870819] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X [ 0.870848] ahci: SSS flag set, parallel bus scan disabled [ 0.883623] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3b impl RAID mode [ 0.883626] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst [ 0.883631] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.915859] scsi0 : ahci [ 0.915948] scsi1 : ahci [ 0.916024] scsi2 : ahci [ 0.916095] scsi3 : ahci [ 0.916146] scsi4 : ahci [ 0.916217] scsi5 : ahci [ 0.916253] ata1: SATA max UDMA/133 abar m2048@0xe1c40000 port 0xe1c40100 irq 43 [ 0.916256] ata2: SATA max UDMA/133 abar m2048@0xe1c40000 port 0xe1c40180 irq 43 [ 0.916258] ata3: DUMMY [ 0.916260] ata4: SATA max UDMA/133 abar m2048@0xe1c40000 port 0xe1c40280 irq 43 [ 0.916263] ata5: SATA max UDMA/133 abar m2048@0xe1c40000 port 0xe1c40300 irq 43 [ 0.916265] ata6: SATA max UDMA/133 abar m2048@0xe1c40000 port 0xe1c40380 irq 43 [ 0.976102] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 0.976112] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 0.976299] hub 1-1:1.0: USB hub found [ 0.976433] hub 1-1:1.0: 6 ports detected [ 1.087324] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.219544] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.219555] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.219894] hub 2-1:1.0: USB hub found [ 1.219989] hub 2-1:1.0: 8 ports detected [ 1.235136] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.259633] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 1.260095] ata1.00: ATA-8: ST250LT007-9ZV14C, 0003DEM1, max UDMA/133 [ 1.260105] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.287494] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 1.287982] ata1.00: configured for UDMA/133 [ 1.288228] scsi 0:0:0:0: Direct-Access ATA ST250LT007-9ZV14 0003 PQ: 0 ANSI: 5 [ 1.288369] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 1.288372] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 1.288373] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.288416] sd 0:0:0:0: [sda] Write Protect is off [ 1.288419] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.288436] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.291193] usb 1-1.4: new full-speed USB device number 3 using ehci-pci [ 1.351337] sda: sda1 sda2 sda4 < sda5 sda6 > [ 1.351737] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.388228] usb 1-1.4: New USB device found, idVendor=413c, idProduct=8187 [ 1.388238] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.388244] usb 1-1.4: Product: DW375 Bluetooth Module [ 1.388249] usb 1-1.4: Manufacturer: Dell Computer Corp [ 1.388254] usb 1-1.4: SerialNumber: 9CB70DECE367 [ 1.450847] tsc: Refined TSC clocksource calibration: 2494.333 MHz [ 1.450853] Switching to clocksource tsc [ 1.490943] usb 2-1.8: new full-speed USB device number 3 using ehci-pci [ 1.605867] usb 2-1.8: New USB device found, idVendor=0a5c, idProduct=5800 [ 1.605871] usb 2-1.8: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.605872] usb 2-1.8: Product: 5880 [ 1.605874] usb 2-1.8: Manufacturer: Broadcom Corp [ 1.605875] usb 2-1.8: SerialNumber: 0123456789ABCD [ 1.606029] usb 2-1.8: config 0 descriptor?? [ 1.606563] ata2: SATA link down (SStatus 0 SControl 300) [ 1.926234] ata4: SATA link down (SStatus 0 SControl 300) [ 2.245821] ata5: SATA link down (SStatus 0 SControl 300) [ 2.565406] ata6: SATA link down (SStatus 0 SControl 300) [ 3.881089] EXT4-fs (sda5): INFO: recovery required on readonly filesystem [ 3.881091] EXT4-fs (sda5): write access will be enabled during recovery [ 9.017195] EXT4-fs (sda5): orphan cleanup on readonly fs [ 9.027465] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 4732627 [ 9.027522] EXT4-fs (sda5): 1 orphan inode deleted [ 9.027524] EXT4-fs (sda5): recovery complete [ 9.157674] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [ 13.313982] Adding 8266748k swap on /dev/sda6. Priority:-1 extents:1 across:8266748k [ 14.114495] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 14.321762] udevd[379]: starting version 175 [ 15.622933] lp: driver loaded but no devices found [ 16.768097] parport_pc 00:07: [io 0x0378-0x037b] [ 16.768176] parport_pc 00:07: [irq 5] [ 16.791006] parport_pc 00:07: activated [ 16.791011] parport_pc 00:07: reported by Plug and Play ACPI [ 16.791085] parport_pc 00:07: disabled [ 16.855955] wmi: Mapper loaded [ 16.886342] ppdev: user-space parallel port driver [ 16.987011] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x23 [ 17.077548] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 17.128231] input: Dell WMI hotkeys as /devices/virtual/input/input5 [ 17.342192] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x23 [ 17.343319] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x23 [ 17.344285] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x23 [ 17.345237] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 17.479859] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20121018/utaddress-251) [ 17.479865] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 17.479868] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251) [ 17.479870] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 17.479871] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251) [ 17.479874] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 17.479875] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251) [ 17.479877] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 17.479878] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 17.588550] mei 0000:00:16.0: setting latency timer to 64 [ 17.588608] mei 0000:00:16.0: irq 44 for MSI/MSI-X [ 17.826673] [drm] Initialized drm 1.1.0 20060810 [ 17.867847] cfg80211: Calling CRDA to update world regulatory domain [ 18.278635] Bluetooth: Core ver 2.16 [ 18.278650] NET: Registered protocol family 31 [ 18.278652] Bluetooth: HCI device and connection manager initialized [ 18.278659] Bluetooth: HCI socket layer initialized [ 18.278662] Bluetooth: L2CAP socket layer initialized [ 18.278667] Bluetooth: SCO socket layer initialized [ 18.355287] Intel(R) Wireless WiFi driver for Linux, in-tree: [ 18.355290] Copyright(c) 2003-2012 Intel Corporation [ 18.355750] iwlwifi 0000:02:00.0: irq 45 for MSI/MSI-X [ 18.388369] [drm] Memory usable by graphics device = 2048M [ 18.388376] i915 0000:00:02.0: setting latency timer to 64 [ 18.438948] i915 0000:00:02.0: irq 46 for MSI/MSI-X [ 18.438956] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 18.438957] [drm] Driver supports precise vblank timestamp query. [ 18.438989] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 18.657747] usbcore: registered new interface driver btusb [ 18.728439] fbcon: inteldrmfb (fb0) is primary device [ 18.734064] input: DualPoint Stick as /devices/platform/i8042/serio1/input/input6 [ 18.746622] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input7 [ 18.950807] iwlwifi 0000:02:00.0: loaded firmware version 18.168.6.1 [ 19.116466] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro [ 19.607367] Console: switching to colour frame buffer device 170x48 [ 19.610142] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 19.610144] i915 0000:00:02.0: registered panic notifier [ 19.662178] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled [ 19.662180] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS enabled [ 19.662182] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled [ 19.662183] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE enabled [ 19.662184] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_P2P disabled [ 19.662186] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0 [ 19.662257] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S [ 19.683319] acpi device:36: registered as cooling_device4 [ 19.695195] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 19.695250] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8 [ 19.695321] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 19.695408] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X [ 19.763255] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 19.814827] type=1400 audit(1372526024.758:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=688 comm="apparmor_parser" [ 19.814835] type=1400 audit(1372526024.758:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=716 comm="apparmor_parser" [ 19.815122] type=1400 audit(1372526024.762:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=688 comm="apparmor_parser" [ 19.815127] type=1400 audit(1372526024.762:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=716 comm="apparmor_parser" [ 19.815277] type=1400 audit(1372526024.762:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=688 comm="apparmor_parser" [ 19.815282] type=1400 audit(1372526024.762:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=716 comm="apparmor_parser" [ 19.851610] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 20.304419] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 20.304502] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 20.304573] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 20.304637] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 20.304698] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 20.304773] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 20.304841] input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 [ 20.782219] cfg80211: World regulatory domain updated: [ 20.782222] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 20.782224] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 20.782225] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 20.782226] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 20.782227] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 20.782228] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 22.384120] init: failsafe main process (946) killed by TERM signal [ 25.983598] init: avahi-cups-reload main process (1072) terminated with status 1 [ 26.265152] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 26.265155] Bluetooth: BNEP filters: protocol multicast [ 26.265160] Bluetooth: BNEP socket layer initialized [ 26.301429] Bluetooth: RFCOMM TTY layer initialized [ 26.301439] Bluetooth: RFCOMM socket layer initialized [ 26.301440] Bluetooth: RFCOMM ver 1.11 [ 26.874232] type=1400 audit(1372526031.830:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1086 comm="apparmor_parser" [ 26.874538] type=1400 audit(1372526031.830:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1086 comm="apparmor_parser" [ 30.141052] init: smbd main process (969) killed by HUP signal [ 30.141072] init: smbd main process ended, respawning [ 30.293865] type=1400 audit(1372526035.254:10): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1137 comm="apparmor_parser" [ 30.294206] type=1400 audit(1372526035.254:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1137 comm="apparmor_parser" [ 30.294393] type=1400 audit(1372526035.254:12): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1137 comm="apparmor_parser" [ 30.367505] type=1400 audit(1372526035.326:13): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=1135 comm="apparmor_parser" [ 30.367711] type=1400 audit(1372526035.326:14): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper//chromium_browser" pid=1135 comm="apparmor_parser" [ 30.367830] type=1400 audit(1372526035.326:15): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper" pid=1136 comm="apparmor_parser" [ 30.368048] type=1400 audit(1372526035.326:16): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper//chromium_browser" pid=1136 comm="apparmor_parser" [ 30.368055] type=1400 audit(1372526035.326:17): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1134 comm="apparmor_parser" [ 31.946721] Unsafe core_pattern used with suid_dumpable=2. Pipe handler or fully qualified core dump path required. [ 32.757096] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X [ 32.858228] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X [ 32.858326] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 32.858682] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 32.896855] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S [ 32.903619] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0 [ 33.295035] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S [ 33.301783] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0 [ 33.522746] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 33.523045] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 36.655453] vboxdrv: Found 4 processor cores. [ 36.655580] vboxdrv: fAsync=0 offMin=0x1fe offMax=0x2614 [ 36.655635] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 36.655636] vboxdrv: Successfully loaded version 4.2.10_Ubuntu (interface 0x001a0004). [ 36.777856] vboxpci: IOMMU not found (not registered) [ 40.049706] wlan0: authenticate with 84:1b:5e:27:7c:d3 [ 40.056162] wlan0: send auth to 84:1b:5e:27:7c:d3 (try 1/3) [ 40.059002] wlan0: authenticated [ 40.060769] wlan0: associate with 84:1b:5e:27:7c:d3 (try 1/3) [ 40.064579] wlan0: RX AssocResp from 84:1b:5e:27:7c:d3 (capab=0x411 status=0 aid=3) [ 40.084452] wlan0: associated [ 40.084498] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 55.985173] init: plymouth-stop pre-start process (1925) terminated with status 1 [ 1488.526816] systemd-hostnamed[3346]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [11705.300230] wlan0: deauthenticating from 84:1b:5e:27:7c:d3 by local choice (reason=3) [11705.327524] cfg80211: Calling CRDA to update world regulatory domain [11705.331919] cfg80211: World regulatory domain updated: [11705.331923] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [11705.331925] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [11705.331927] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [11705.331929] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [11705.331930] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [11705.331932] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [11706.141985] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X [11706.243243] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X [11706.243365] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [11706.244309] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S [11706.251101] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0 [11706.476047] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [11707.195075] PM: Syncing filesystems ... done. [11707.302175] Freezing user space processes ... (elapsed 0.01 seconds) done. [11707.317920] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [11707.333945] Suspending console(s) (use no_console_suspend to debug) [11709.331177] iwlwifi 0000:02:00.0: Error sending REPLY_RXON: time out after 2000ms. [11709.331189] iwlwifi 0000:02:00.0: Current CMD queue read_ptr 28 write_ptr 29 [11709.331190] iwlwifi 0000:02:00.0: Error clearing ASSOC_MSK on BSS (-110) [11709.587249] iwlwifi 0000:02:00.0: Error: Response NULL in 'REPLY_SCAN_ABORT_CMD' [11709.587620] iwlwifi 0000:02:00.0: HCMD_ACTIVE already clear for command REPLY_RXON [11709.591587] sd 0:0:0:0: [sda] Synchronizing SCSI cache [11709.591988] sd 0:0:0:0: [sda] Stopping disk [11709.970467] PM: suspend of devices complete after 2639.825 msecs [11709.970595] PM: late suspend of devices complete after 0.125 msecs [11709.986401] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [11710.002512] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [11710.018567] e1000e 0000:00:19.0: System wakeup enabled by ACPI [11710.050241] PM: noirq suspend of devices complete after 79.747 msecs [11710.050419] ACPI: Preparing to enter system sleep state S3 [11710.070293] PM: Saving platform NVS memory [11710.072417] Disabling non-boot CPUs ... [11710.174011] smpboot: CPU 1 is now offline [11710.277861] smpboot: CPU 2 is now offline [11710.381725] smpboot: CPU 3 is now offline [11710.382061] Extended CMOS year: 2000 [11710.383028] ACPI: Low-level resume complete [11710.383067] PM: Restoring platform NVS memory [11710.383501] Extended CMOS year: 2000 [11710.383538] Enabling non-boot CPUs ... [11710.383613] smpboot: Booting Node 0 Processor 1 APIC 0x2 [11710.396883] CPU1 is up [11710.396923] smpboot: Booting Node 0 Processor 2 APIC 0x1 [11710.410191] CPU2 is up [11710.410231] smpboot: Booting Node 0 Processor 3 APIC 0x3 [11710.423574] CPU3 is up [11710.426406] ACPI: Waking up from system sleep state S3 [11710.610948] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [11710.642905] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [11710.691103] PM: noirq resume of devices complete after 156.078 msecs [11710.691213] PM: early resume of devices complete after 0.085 msecs [11710.691243] i915 0000:00:02.0: setting latency timer to 64 [11710.691280] mei 0000:00:16.0: irq 42 for MSI/MSI-X [11710.691368] ehci-pci 0000:00:1d.0: setting latency timer to 64 [11710.691385] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X [11710.691387] ahci 0000:00:1f.2: setting latency timer to 64 [11710.691433] ehci-pci 0000:00:1a.0: setting latency timer to 64 [11710.714996] e1000e 0000:00:19.0: System wakeup disabled by ACPI [11710.715015] e1000e 0000:00:19.0: setting latency timer to 64 [11710.715072] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X [11710.914732] usb 1-1.4: reset full-speed USB device number 3 using ehci-pci [11711.008997] btusb 1-1.4:1.0: no reset_resume for driver btusb? [11711.009001] btusb 1-1.4:1.1: no reset_resume for driver btusb? [11711.034439] ata5: SATA link down (SStatus 0 SControl 300) [11711.042412] ata2: SATA link down (SStatus 0 SControl 300) [11711.050407] ata4: SATA link down (SStatus 0 SControl 300) [11711.058417] ata6: SATA link down (SStatus 0 SControl 300) [11711.949373] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [11712.320759] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [11712.341492] ata1.00: ACPI cmd ef/5a:00:00:00:00:a0 (SET FEATURES) succeeded [11712.373276] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [11712.373716] ata1.00: configured for UDMA/133 [11712.396742] sd 0:0:0:0: [sda] Starting disk [11712.404796] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S [11712.411545] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0 [11712.646548] PM: resume of devices complete after 1957.860 msecs [11712.647164] Restarting tasks ... done. [11712.658350] video LNXVIDEO:00: Restoring backlight state [11736.314933] wlan0: authenticate with 84:1b:5e:27:7c:d3 [11736.319174] wlan0: send auth to 84:1b:5e:27:7c:d3 (try 1/3) [11736.321049] wlan0: authenticated [11736.321796] wlan0: associate with 84:1b:5e:27:7c:d3 (try 1/3) [11736.325552] wlan0: RX AssocResp from 84:1b:5e:27:7c:d3 (capab=0x411 status=0 aid=3) [11736.348895] wlan0: associated [11736.348923] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [17721.103960] wlan0: deauthenticating from 84:1b:5e:27:7c:d3 by local choice (reason=3) [17721.136592] cfg80211: Calling CRDA to update world regulatory domain [17721.140468] cfg80211: World regulatory domain updated: [17721.140471] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [17721.140472] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [17721.140474] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [17721.140475] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [17721.140476] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [17721.140477] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [17721.923813] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X [17722.027644] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X [17722.027748] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [17722.028593] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S [17722.035828] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0 [17722.260383] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [17721.514366] PM: Syncing filesystems ... done. [17722.643215] Freezing user space processes ... (elapsed 0.28 seconds) done. [17722.930534] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [17722.946586] Suspending console(s) (use no_console_suspend to debug) [17724.943860] iwlwifi 0000:02:00.0: Error sending REPLY_RXON: time out after 2000ms. [17724.943862] iwlwifi 0000:02:00.0: Current CMD queue read_ptr 28 write_ptr 29 [17724.943864] iwlwifi 0000:02:00.0: Error clearing ASSOC_MSK on BSS (-110) [17725.303716] iwlwifi 0000:02:00.0: Error: Response NULL in 'REPLY_SCAN_ABORT_CMD' [17725.304048] iwlwifi 0000:02:00.0: HCMD_ACTIVE already clear for command REPLY_RXON [17725.308075] sd 0:0:0:0: [sda] Synchronizing SCSI cache [17725.308494] sd 0:0:0:0: [sda] Stopping disk [17725.682987] PM: suspend of devices complete after 2739.837 msecs [17725.683129] PM: late suspend of devices complete after 0.140 msecs [17725.698938] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [17725.715045] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [17725.731132] e1000e 0000:00:19.0: System wakeup enabled by ACPI [17725.762788] PM: noirq suspend of devices complete after 79.761 msecs [17725.762966] ACPI: Preparing to enter system sleep state S3 [17725.782840] PM: Saving platform NVS memory [17725.784967] Disabling non-boot CPUs ... [17725.886555] smpboot: CPU 1 is now offline [17725.990409] smpboot: CPU 2 is now offline [17726.094272] smpboot: CPU 3 is now offline [17726.094578] Extended CMOS year: 2000 [17726.095768] ACPI: Low-level resume complete [17726.095814] PM: Restoring platform NVS memory [17726.096291] Extended CMOS year: 2000 [17726.096355] Enabling non-boot CPUs ... [17726.096427] smpboot: Booting Node 0 Processor 1 APIC 0x2 [17726.109734] CPU1 is up [17726.109784] smpboot: Booting Node 0 Processor 2 APIC 0x1 [17726.123088] CPU2 is up [17726.123134] smpboot: Booting Node 0 Processor 3 APIC 0x3 [17726.136577] CPU3 is up [17726.140024] ACPI: Waking up from system sleep state S3 [17726.323769] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [17726.355731] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [17726.403951] PM: noirq resume of devices complete after 143.943 msecs [17726.404083] PM: early resume of devices complete after 0.104 msecs [17726.404118] i915 0000:00:02.0: setting latency timer to 64 [17726.404150] ehci-pci 0000:00:1a.0: setting latency timer to 64 [17726.404159] mei 0000:00:16.0: irq 42 for MSI/MSI-X [17726.404218] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X [17726.404219] ehci-pci 0000:00:1d.0: setting latency timer to 64 [17726.404239] ahci 0000:00:1f.2: setting latency timer to 64 [17726.423798] e1000e 0000:00:19.0: System wakeup disabled by ACPI [17726.423808] e1000e 0000:00:19.0: setting latency timer to 64 [17726.423856] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X [17726.627576] usb 1-1.4: reset full-speed USB device number 3 using ehci-pci [17726.721732] btusb 1-1.4:1.0: no reset_resume for driver btusb? [17726.721737] btusb 1-1.4:1.1: no reset_resume for driver btusb? [17726.731265] ata4: SATA link down (SStatus 0 SControl 300) [17726.747245] ata5: SATA link down (SStatus 0 SControl 300) [17726.755245] ata2: SATA link down (SStatus 0 SControl 300) [17726.763230] ata6: SATA link down (SStatus 0 SControl 300) [17727.913739] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [17727.927356] ata1.00: ACPI cmd ef/5a:00:00:00:00:a0 (SET FEATURES) succeeded [17727.958242] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [17727.958761] ata1.00: configured for UDMA/133 [17727.973897] sd 0:0:0:0: [sda] Starting disk [17727.986707] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S [17727.993663] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0 [17728.165540] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [17728.240417] PM: resume of devices complete after 1838.699 msecs [17728.242513] Restarting tasks ... done. [17728.268319] video LNXVIDEO:00: Restoring backlight state [17751.880088] wlan0: authenticate with 00:04:0e:76:78:54 [17751.884172] wlan0: send auth to 00:04:0e:76:78:54 (try 1/3) [17751.886145] wlan0: authenticated [17751.886753] iwlwifi 0000:02:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use [17751.886775] iwlwifi 0000:02:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [17751.886783] iwlwifi 0000:02:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [17751.890650] wlan0: associate with 00:04:0e:76:78:54 (try 1/3) [17751.894452] wlan0: RX AssocResp from 00:04:0e:76:78:54 (capab=0x451 status=0 aid=3) [17751.900511] wlan0: associated [17751.900600] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [24786.967320] e1000e 0000:00:19.0: setting latency timer to 64 [24786.967489] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X [25337.243141] warning: `VirtualBox' uses 32-bit capabilities (legacy support in use) [58112.488460] wlan0: deauthenticating from 00:04:0e:76:78:54 by local choice (reason=3) [58112.526159] cfg80211: Calling CRDA to update world regulatory domain [58116.525680] cfg80211: World regulatory domain updated: [58116.525691] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [58116.525697] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [58116.525714] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [58116.525719] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [58116.525723] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [58116.525727] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [58118.555403] init: anacron main process (10113) killed by TERM signal [58120.237927] PM: Syncing filesystems ... done. [58120.902729] Freezing user space processes ... (elapsed 0.01 seconds) done. [58120.917518] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [58120.933543] Suspending console(s) (use no_console_suspend to debug) [58120.933826] sd 0:0:0:0: [sda] Synchronizing SCSI cache [58120.935071] sd 0:0:0:0: [sda] Stopping disk [58121.316882] PM: suspend of devices complete after 383.716 msecs [58121.317033] PM: late suspend of devices complete after 0.148 msecs [58121.332902] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [58121.349007] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [58121.365142] e1000e 0000:00:19.0: System wakeup enabled by ACPI [58121.396747] PM: noirq suspend of devices complete after 79.814 msecs [58121.396968] ACPI: Preparing to enter system sleep state S3 [58121.416815] PM: Saving platform NVS memory [58121.419438] Disabling non-boot CPUs ... [58121.420892] smpboot: CPU 1 is now offline [58121.524509] smpboot: CPU 2 is now offline [58121.628374] smpboot: CPU 3 is now offline [58121.628752] Extended CMOS year: 2000 [58121.629765] ACPI: Low-level resume complete [58121.629804] PM: Restoring platform NVS memory [58121.630242] Extended CMOS year: 2000 [58121.630279] Enabling non-boot CPUs ... [58121.630358] smpboot: Booting Node 0 Processor 1 APIC 0x2 [58121.643631] CPU1 is up [58121.643672] smpboot: Booting Node 0 Processor 2 APIC 0x1 [58121.656937] CPU2 is up [58121.656976] smpboot: Booting Node 0 Processor 3 APIC 0x3 [58121.670340] CPU3 is up [58121.673166] ACPI: Waking up from system sleep state S3 [58121.857642] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [58121.889598] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [58121.937785] PM: noirq resume of devices complete after 156.078 msecs [58121.937896] PM: early resume of devices complete after 0.086 msecs [58121.937925] i915 0000:00:02.0: setting latency timer to 64 [58121.937964] mei 0000:00:16.0: irq 42 for MSI/MSI-X [58121.938007] ehci-pci 0000:00:1a.0: setting latency timer to 64 [58121.938057] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X [58121.938078] ehci-pci 0000:00:1d.0: setting latency timer to 64 [58121.938086] ahci 0000:00:1f.2: setting latency timer to 64 [58121.953638] e1000e 0000:00:19.0: System wakeup disabled by ACPI [58121.953657] e1000e 0000:00:19.0: setting latency timer to 64 [58121.953700] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X [58122.161503] usb 1-1.4: reset full-speed USB device number 3 using ehci-pci [58122.255641] btusb 1-1.4:1.0: no reset_resume for driver btusb? [58122.255646] btusb 1-1.4:1.1: no reset_resume for driver btusb? [58122.261120] ata2: SATA link down (SStatus 0 SControl 300) [58122.277144] ata5: SATA link down (SStatus 0 SControl 300) [58122.285118] ata4: SATA link down (SStatus 0 SControl 300) [58122.293107] ata6: SATA link down (SStatus 0 SControl 300) [58123.555472] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [58123.572214] ata1.00: ACPI cmd ef/5a:00:00:00:00:a0 (SET FEATURES) succeeded [58123.608022] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [58123.608481] ata1.00: configured for UDMA/133 [58123.631464] sd 0:0:0:0: [sda] Starting disk [58123.641396] PM: resume of devices complete after 1705.700 msecs [58123.641799] Restarting tasks ... done. [58123.653938] video LNXVIDEO:00: Restoring backlight state [58123.891071] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [58124.662063] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X [58124.765857] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X [58124.765980] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [58124.766896] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S [58124.773634] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0 [58124.989710] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [58131.825764] wlan0: authenticate with 00:04:0e:76:78:54 [58131.831799] wlan0: send auth to 00:04:0e:76:78:54 (try 1/3) [58131.833531] wlan0: authenticated [58131.834052] iwlwifi 0000:02:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use [58131.834056] iwlwifi 0000:02:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [58131.834058] iwlwifi 0000:02:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [58131.836660] wlan0: associate with 00:04:0e:76:78:54 (try 1/3) [58131.841452] wlan0: RX AssocResp from 00:04:0e:76:78:54 (capab=0x451 status=0 aid=3) [58131.846333] wlan0: associated [58131.846367] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [74496.696267] wlan0: deauthenticating from 00:04:0e:76:78:54 by local choice (reason=3) [74496.712539] cfg80211: Calling CRDA to update world regulatory domain [74498.861899] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X [74498.964110] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X [74498.964208] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [74498.965185] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S [74498.972512] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0 [74499.197163] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [74499.590735] cfg80211: World regulatory domain updated: [74499.590740] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [74499.590744] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [74499.590746] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [74499.590748] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [74499.590751] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [74499.590753] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [74502.676214] PM: Syncing filesystems ... done. [74503.652455] Freezing user space processes ... (elapsed 0.01 seconds) done. [74503.666182] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [74503.682216] Suspending console(s) (use no_console_suspend to debug) [74505.605824] sd 0:0:0:0: [sda] Synchronizing SCSI cache [74505.606269] sd 0:0:0:0: [sda] Stopping disk [74505.979079] PM: suspend of devices complete after 2299.724 msecs [74505.979206] PM: late suspend of devices complete after 0.124 msecs [74505.995104] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [74506.011212] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [74506.027297] e1000e 0000:00:19.0: System wakeup enabled by ACPI [74506.058955] PM: noirq suspend of devices complete after 79.851 msecs [74506.059132] ACPI: Preparing to enter system sleep state S3 [74506.079009] PM: Saving platform NVS memory [74506.081130] Disabling non-boot CPUs ... [74506.182745] smpboot: CPU 1 is now offline [74506.184253] smpboot: CPU 2 is now offline [74506.185792] smpboot: CPU 3 is now offline [74506.186105] Extended CMOS year: 2000 [74506.187062] ACPI: Low-level resume complete [74506.187101] PM: Restoring platform NVS memory [74506.187540] Extended CMOS year: 2000 [74506.187593] Enabling non-boot CPUs ... [74506.187653] smpboot: Booting Node 0 Processor 1 APIC 0x2 [74506.200926] CPU1 is up [74506.200965] smpboot: Booting Node 0 Processor 2 APIC 0x1 [74506.214253] CPU2 is up [74506.214301] smpboot: Booting Node 0 Processor 3 APIC 0x3 [74506.227641] CPU3 is up [74506.230469] ACPI: Waking up from system sleep state S3 [74506.407931] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [74506.439887] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [74506.488081] PM: noirq resume of devices complete after 148.082 msecs [74506.488191] PM: early resume of devices complete after 0.086 msecs [74506.488212] i915 0000:00:02.0: setting latency timer to 64 [74506.488300] ehci-pci 0000:00:1a.0: setting latency timer to 64 [74506.488353] mei 0000:00:16.0: irq 42 for MSI/MSI-X [74506.488365] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X [74506.488451] ehci-pci 0000:00:1d.0: setting latency timer to 64 [74506.488509] ahci 0000:00:1f.2: setting latency timer to 64 [74506.508084] e1000e 0000:00:19.0: System wakeup disabled by ACPI [74506.508096] e1000e 0000:00:19.0: setting latency timer to 64 [74506.508153] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X [74506.608307] Extended CMOS year: 2000 [74506.711746] usb 1-1.4: reset full-speed USB device number 3 using ehci-pci [74506.806111] btusb 1-1.4:1.0: no reset_resume for driver btusb? [74506.806115] btusb 1-1.4:1.1: no reset_resume for driver btusb? [74506.835414] ata4: SATA link down (SStatus 0 SControl 300) [74506.843394] ata5: SATA link down (SStatus 0 SControl 300) [74506.851395] ata6: SATA link down (SStatus 0 SControl 300) [74506.859381] ata2: SATA link down (SStatus 0 SControl 300) [74507.678452] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [74508.121742] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [74508.138468] ata1.00: ACPI cmd ef/5a:00:00:00:00:a0 (SET FEATURES) succeeded [74508.170259] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [74508.170717] ata1.00: configured for UDMA/133 [74508.193730] sd 0:0:0:0: [sda] Starting disk [74508.200215] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S [74508.206972] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0 [74508.445445] PM: resume of devices complete after 1959.782 msecs [74508.445863] Restarting tasks ... done. [74508.457472] video LNXVIDEO:00: Restoring backlight state [74516.624815] wlan0: authenticate with 00:04:0e:76:78:54 [74516.627323] wlan0: send auth to 00:04:0e:76:78:54 (try 1/3) [74516.629239] wlan0: authenticated [74516.629617] iwlwifi 0000:02:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use [74516.629630] iwlwifi 0000:02:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [74516.629638] iwlwifi 0000:02:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [74516.630765] wlan0: associate with 00:04:0e:76:78:54 (try 1/3) [74516.634411] wlan0: RX AssocResp from 00:04:0e:76:78:54 (capab=0x451 status=0 aid=3) [74516.639832] wlan0: associated [74516.639907] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [76419.486090] wlan0: deauthenticating from 00:04:0e:76:78:54 by local choice (reason=3) [76419.518773] cfg80211: Calling CRDA to update world regulatory domain [76419.557714] cfg80211: World regulatory domain updated: [76419.557718] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [76419.557720] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [76419.557722] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [76419.557723] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [76419.557725] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [76419.557726] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [76420.218332] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X [76420.319202] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X [76420.319305] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [76420.320199] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S [76420.327385] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0 [76420.552240] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [76420.148466] PM: Syncing filesystems ... done. [76421.086657] Freezing user space processes ... (elapsed 0.04 seconds) done. [76421.134208] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [76421.150272] Suspending console(s) (use no_console_suspend to debug) [76423.147510] iwlwifi 0000:02:00.0: Error sending REPLY_RXON: time out after 2000ms. [76423.147512] iwlwifi 0000:02:00.0: Current CMD queue read_ptr 28 write_ptr 29 [76423.147514] iwlwifi 0000:02:00.0: Error clearing ASSOC_MSK on BSS (-110) [76423.728169] iwlwifi 0000:02:00.0: Error: Response NULL in 'REPLY_SCAN_ABORT_CMD' [76423.728520] iwlwifi 0000:02:00.0: HCMD_ACTIVE already clear for command REPLY_RXON [76423.733108] sd 0:0:0:0: [sda] Synchronizing SCSI cache [76423.734032] sd 0:0:0:0: [sda] Stopping disk [76424.110329] PM: suspend of devices complete after 2963.786 msecs [76424.110456] PM: late suspend of devices complete after 0.125 msecs [76424.126304] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [76424.142411] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [76424.158500] e1000e 0000:00:19.0: System wakeup enabled by ACPI [76424.190154] PM: noirq suspend of devices complete after 79.800 msecs [76424.190332] ACPI: Preparing to enter system sleep state S3 [76424.210206] PM: Saving platform NVS memory [76424.212357] Disabling non-boot CPUs ... [76424.313917] smpboot: CPU 1 is now offline [76424.417772] smpboot: CPU 2 is now offline [76424.521638] smpboot: CPU 3 is now offline [76424.521974] Extended CMOS year: 2000 [76424.522931] ACPI: Low-level resume complete [76424.522971] PM: Restoring platform NVS memory [76424.523404] Extended CMOS year: 2000 [76424.523457] Enabling non-boot CPUs ... [76424.523519] smpboot: Booting Node 0 Processor 1 APIC 0x2 [76424.536792] CPU1 is up [76424.536833] smpboot: Booting Node 0 Processor 2 APIC 0x1 [76424.550107] CPU2 is up [76424.550146] smpboot: Booting Node 0 Processor 3 APIC 0x3 [76424.563430] CPU3 is up [76424.566216] ACPI: Waking up from system sleep state S3 [76424.750853] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [76424.782809] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [76424.830996] PM: noirq resume of devices complete after 156.064 msecs [76424.831107] PM: early resume of devices complete after 0.087 msecs [76424.831138] i915 0000:00:02.0: setting latency timer to 64 [76424.831179] mei 0000:00:16.0: irq 42 for MSI/MSI-X [76424.831206] ehci-pci 0000:00:1a.0: setting latency timer to 64 [76424.831271] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X [76424.831273] ehci-pci 0000:00:1d.0: setting latency timer to 64 [76424.831292] ahci 0000:00:1f.2: setting latency timer to 64 [76424.850773] e1000e 0000:00:19.0: System wakeup disabled by ACPI [76424.850786] e1000e 0000:00:19.0: setting latency timer to 64 [76424.850844] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X [76424.879462] Extended CMOS year: 2000 [76425.054566] usb 1-1.4: reset full-speed USB device number 3 using ehci-pci [76425.148845] btusb 1-1.4:1.0: no reset_resume for driver btusb? [76425.148849] btusb 1-1.4:1.1: no reset_resume for driver btusb? [76425.178320] ata6: SATA link down (SStatus 0 SControl 300) [76425.186316] ata2: SATA link down (SStatus 0 SControl 300) [76425.198300] ata4: SATA link down (SStatus 0 SControl 300) [76425.202296] ata5: SATA link down (SStatus 0 SControl 300) [76426.209124] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [76426.400741] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [76426.417480] ata1.00: ACPI cmd ef/5a:00:00:00:00:a0 (SET FEATURES) succeeded [76426.445257] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [76426.445731] ata1.00: configured for UDMA/133 [76426.468730] sd 0:0:0:0: [sda] Starting disk [76426.476445] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S [76426.483201] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0 [76426.717161] PM: resume of devices complete after 1888.489 msecs [76426.717777] Restarting tasks ... done. [76426.738768] video LNXVIDEO:00: Restoring backlight state [76449.795694] wlan0: authenticate with 00:04:0e:76:78:54 [76449.797897] wlan0: send auth to 00:04:0e:76:78:54 (try 1/3) [76449.800320] wlan0: authenticated [76449.800717] iwlwifi 0000:02:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use [76449.800729] iwlwifi 0000:02:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [76449.800737] iwlwifi 0000:02:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [76449.800749] wlan0: waiting for beacon from 00:04:0e:76:78:54 [76449.898286] wlan0: associate with 00:04:0e:76:78:54 (try 1/3) [76449.903263] wlan0: RX AssocResp from 00:04:0e:76:78:54 (capab=0x451 status=0 aid=4) [76449.907020] wlan0: associated [76449.907083] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [79163.059650] init: upstart-file-bridge main process (318) terminated with status 1 [79163.059720] init: upstart-file-bridge main process ended, respawning [79163.060019] init: upstart-udev-bridge main process (375) terminated with status 1 [79163.060067] init: upstart-udev-bridge main process ended, respawning [79163.060338] init: upstart-socket-bridge main process (905) terminated with status 1 [79163.060386] init: upstart-socket-bridge main process ended, respawning [83794.690769] wlan0: deauthenticating from 00:04:0e:76:78:54 by local choice (reason=3) [83794.718684] cfg80211: Calling CRDA to update world regulatory domain [83794.722216] cfg80211: World regulatory domain updated: [83794.722219] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [83794.722221] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [83794.722223] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [83794.722225] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [83794.722227] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [83794.722229] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [83795.584424] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X [83795.686920] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X [83795.687026] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [83795.687897] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S [83795.695128] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0 [83795.928472] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [83795.173704] PM: Syncing filesystems ... done. [83796.086735] Freezing user space processes ... (elapsed 0.20 seconds) done. [83796.294248] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [83796.310277] Suspending console(s) (use no_console_suspend to debug) [83796.378852] sd 0:0:0:0: [sda] Synchronizing SCSI cache [83796.379248] sd 0:0:0:0: [sda] Stopping disk [83796.761575] PM: suspend of devices complete after 451.781 msecs [83796.761705] PM: late suspend of devices complete after 0.128 msecs [83796.777551] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [83796.793657] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [83796.809749] e1000e 0000:00:19.0: System wakeup enabled by ACPI [83796.841402] PM: noirq suspend of devices complete after 79.798 msecs [83796.841580] ACPI: Preparing to enter system sleep state S3 [83796.861454] PM: Saving platform NVS memory [83796.863591] Disabling non-boot CPUs ... [83796.965167] smpboot: CPU 1 is now offline [83797.069021] smpboot: CPU 2 is now offline [83797.172884] smpboot: CPU 3 is now offline [83797.173216] Extended CMOS year: 2000 [83797.174170] ACPI: Low-level resume complete [83797.174209] PM: Restoring platform NVS memory [83797.174641] Extended CMOS year: 2000 [83797.174694] Enabling non-boot CPUs ... [83797.174755] smpboot: Booting Node 0 Processor 1 APIC 0x2 [83797.188031] CPU1 is up [83797.188070] smpboot: Booting Node 0 Processor 2 APIC 0x1 [83797.201340] CPU2 is up [83797.201381] smpboot: Booting Node 0 Processor 3 APIC 0x3 [83797.214725] CPU3 is up [83797.217565] ACPI: Waking up from system sleep state S3 [83797.402095] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [83797.434049] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [83797.482240] PM: noirq resume of devices complete after 156.080 msecs [83797.482350] PM: early resume of devices complete after 0.085 msecs [83797.482380] i915 0000:00:02.0: setting latency timer to 64 [83797.482417] mei 0000:00:16.0: irq 42 for MSI/MSI-X [83797.482450] ehci-pci 0000:00:1a.0: setting latency timer to 64 [83797.482482] ahci 0000:00:1f.2: setting latency timer to 64 [83797.482483] ehci-pci 0000:00:1d.0: setting latency timer to 64 [83797.482668] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X [83797.498130] e1000e 0000:00:19.0: System wakeup disabled by ACPI [83797.498169] e1000e 0000:00:19.0: setting latency timer to 64 [83797.498263] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X [83797.589569] Extended CMOS year: 2000 [83797.705958] usb 1-1.4: reset full-speed USB device number 3 using ehci-pci [83797.800081] btusb 1-1.4:1.0: no reset_resume for driver btusb? [83797.800085] btusb 1-1.4:1.1: no reset_resume for driver btusb? [83797.801546] ata2: SATA link down (SStatus 0 SControl 300) [83797.817585] ata6: SATA link down (SStatus 0 SControl 300) [83797.825570] ata5: SATA link down (SStatus 0 SControl 300) [83797.833569] ata4: SATA link down (SStatus 0 SControl 300) [83799.095938] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [83799.112692] ata1.00: ACPI cmd ef/5a:00:00:00:00:a0 (SET FEATURES) succeeded [83799.136482] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [83799.136956] ata1.00: configured for UDMA/133 [83799.159923] sd 0:0:0:0: [sda] Starting disk [83799.165521] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S [83799.172280] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0 [83799.359720] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [83799.411997] PM: resume of devices complete after 1932.131 msecs [83799.412447] Restarting tasks ... done. [83799.429794] video LNXVIDEO:00: Restoring backlight state [83825.784940] wlan0: authenticate with 00:04:0e:76:78:54 [83825.787477] wlan0: send auth to 00:04:0e:76:78:54 (try 1/3) [83825.789378] wlan0: authenticated [83825.789909] iwlwifi 0000:02:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use [83825.789922] iwlwifi 0000:02:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [83825.789931] iwlwifi 0000:02:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [83825.793307] wlan0: associate with 00:04:0e:76:78:54 (try 1/3) [83825.796853] wlan0: RX AssocResp from 00:04:0e:76:78:54 (capab=0x451 status=0 aid=3) [83825.803656] wlan0: associated [83825.803699] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [86405.716597] wlan0: deauthenticating from 00:04:0e:76:78:54 by local choice (reason=3) [86405.751501] cfg80211: Calling CRDA to update world regulatory domain [86405.858065] cfg80211: World regulatory domain updated: [86405.858068] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [86405.858069] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [86405.858071] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [86405.858072] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [86405.858073] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [86405.858074] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [86406.540080] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X [86406.640345] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X [86406.640467] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [86406.641361] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S [86406.648662] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0 [86406.868205] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [86407.574252] PM: Syncing filesystems ... done. [86408.162784] Freezing user space processes ... (elapsed 0.01 seconds) done. [86408.178336] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [86408.194425] Suspending console(s) (use no_console_suspend to debug) [86410.112897] sd 0:0:0:0: [sda] Synchronizing SCSI cache [86410.113322] sd 0:0:0:0: [sda] Stopping disk [86410.495289] PM: suspend of devices complete after 2303.738 msecs [86410.495415] PM: late suspend of devices complete after 0.125 msecs [86410.511304] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [86410.527413] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [86410.543501] e1000e 0000:00:19.0: System wakeup enabled by ACPI [86410.575156] PM: noirq suspend of devices complete after 79.842 msecs [86410.575334] ACPI: Preparing to enter system sleep state S3 [86410.595208] PM: Saving platform NVS memory [86410.597304] Disabling non-boot CPUs ... [86410.698954] smpboot: CPU 1 is now offline [86410.802781] smpboot: CPU 2 is now offline [86410.804241] smpboot: CPU 3 is now offline [86410.804539] Extended CMOS year: 2000 [86410.805729] ACPI: Low-level resume complete [86410.805775] PM: Restoring platform NVS memory [86410.806246] Extended CMOS year: 2000 [86410.806310] Enabling non-boot CPUs ... [86410.806381] smpboot: Booting Node 0 Processor 1 APIC 0x2 [86410.819684] CPU1 is up [86410.819745] smpboot: Booting Node 0 Processor 2 APIC 0x1 [86410.833154] CPU2 is up [86410.833220] smpboot: Booting Node 0 Processor 3 APIC 0x3 [86410.846683] CPU3 is up [86410.850094] ACPI: Waking up from system sleep state S3 [86411.040244] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [86411.072214] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [86411.120440] PM: noirq resume of devices complete after 143.954 msecs [86411.120574] PM: early resume of devices complete after 0.104 msecs [86411.120608] i915 0000:00:02.0: setting latency timer to 64 [86411.120640] ehci-pci 0000:00:1a.0: setting latency timer to 64 [86411.120648] mei 0000:00:16.0: irq 42 for MSI/MSI-X [86411.120702] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X [86411.120717] ehci-pci 0000:00:1d.0: setting latency timer to 64 [86411.120737] ahci 0000:00:1f.2: setting latency timer to 64 [86411.136446] e1000e 0000:00:19.0: System wakeup disabled by ACPI [86411.136460] e1000e 0000:00:19.0: setting latency timer to 64 [86411.136512] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X [86411.208633] Extended CMOS year: 2000 [86411.344183] usb 1-1.4: reset full-speed USB device number 3 using ehci-pci [86411.438362] btusb 1-1.4:1.0: no reset_resume for driver btusb? [86411.438366] btusb 1-1.4:1.1: no reset_resume for driver btusb? [86411.463736] ata5: SATA link down (SStatus 0 SControl 300) [86411.463755] ata2: SATA link down (SStatus 0 SControl 300) [86411.471760] ata6: SATA link down (SStatus 0 SControl 300) [86411.479719] ata4: SATA link down (SStatus 0 SControl 300) [86412.718107] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [86412.731159] ata1.00: ACPI cmd ef/5a:00:00:00:00:a0 (SET FEATURES) succeeded [86412.770822] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [86412.771282] ata1.00: configured for UDMA/133 [86412.786244] sd 0:0:0:0: [sda] Starting disk [86412.793999] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S [86412.800999] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0 [86412.806142] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [86413.056783] PM: resume of devices complete after 1938.709 msecs [86413.058290] Restarting tasks ... done. [86413.079425] video LNXVIDEO:00: Restoring backlight state [86413.943318] init: anacron main process (22483) killed by TERM signal [86436.497029] wlan0: authenticate with 84:1b:5e:27:7c:d3 [86436.506200] wlan0: send auth to 84:1b:5e:27:7c:d3 (try 1/3) [86436.509477] wlan0: authenticated [86436.511279] wlan0: associate with 84:1b:5e:27:7c:d3 (try 1/3) [86436.515156] wlan0: RX AssocResp from 84:1b:5e:27:7c:d3 (capab=0x411 status=0 aid=3) [86436.534926] wlan0: associated [86436.535040] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [90937.084030] e1000e 0000:00:19.0: setting latency timer to 64 [90937.084179] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X [91477.036146] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [91503.936281] audit_printk_skb: 42 callbacks suppressed [91503.936289] type=1400 audit(1373039170.314:32): apparmor="STATUS" operation="profile_replace" name="/usr/bin/evince" pid=27660 comm="apparmor_parser" [91503.938336] type=1400 audit(1373039170.318:33): apparmor="STATUS" operation="profile_replace" name="/usr/bin/evince//sanitized_helper" pid=27660 comm="apparmor_parser" [91503.940337] type=1400 audit(1373039170.318:34): apparmor="STATUS" operation="profile_replace" name="/usr/bin/evince-previewer" pid=27660 comm="apparmor_parser" [91503.941819] type=1400 audit(1373039170.322:35): apparmor="STATUS" operation="profile_replace" name="/usr/bin/evince-previewer//sanitized_helper" pid=27660 comm="apparmor_parser" [91503.943311] type=1400 audit(1373039170.322:36): apparmor="STATUS" operation="profile_replace" name="/usr/bin/evince-thumbnailer" pid=27660 comm="apparmor_parser" [91503.944489] type=1400 audit(1373039170.322:37): apparmor="STATUS" operation="profile_replace" name="/usr/bin/evince-thumbnailer//sanitized_helper" pid=27660 comm="apparmor_parser"