[ 0.000000] BIOS EBDA/lowmem at: 0009ec00/0009ec00 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.28-11-generic (buildd@palmer) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #42-Ubuntu SMP Fri Apr 17 01:57:59 UTC 2009 (Ubuntu 2.6.28-11.42-generic) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable) [ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007c6a1000 (usable) [ 0.000000] BIOS-e820: 000000007c6a1000 - 000000007c6a7000 (reserved) [ 0.000000] BIOS-e820: 000000007c6a7000 - 000000007c7b7000 (usable) [ 0.000000] BIOS-e820: 000000007c7b7000 - 000000007c80f000 (reserved) [ 0.000000] BIOS-e820: 000000007c80f000 - 000000007c8c7000 (usable) [ 0.000000] BIOS-e820: 000000007c8c7000 - 000000007c8d2000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007c8d2000 - 000000007c8d5000 (ACPI data) [ 0.000000] BIOS-e820: 000000007c8d5000 - 000000007c8d9000 (reserved) [ 0.000000] BIOS-e820: 000000007c8d9000 - 000000007c8dd000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007c8dd000 - 000000007c8e0000 (reserved) [ 0.000000] BIOS-e820: 000000007c8e0000 - 000000007c907000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007c907000 - 000000007c908000 (ACPI data) [ 0.000000] BIOS-e820: 000000007c908000 - 000000007cb0f000 (reserved) [ 0.000000] BIOS-e820: 000000007cb0f000 - 000000007cb9f000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007cb9f000 - 000000007cbff000 (ACPI data) [ 0.000000] BIOS-e820: 000000007cbff000 - 000000007cc00000 (usable) [ 0.000000] BIOS-e820: 000000007cc00000 - 000000007f000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved) [ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) [ 0.000000] DMI present. [ 0.000000] last_pfn = 0x7cc00 max_arch_pfn = 0x100000 [ 0.000000] Scanning 2 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 0000000000007000 (usable) [ 0.000000] modified: 0000000000007000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 0000000000091c00 (usable) [ 0.000000] modified: 000000000009ec00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000007c6a1000 (usable) [ 0.000000] modified: 000000007c6a1000 - 000000007c6a7000 (reserved) [ 0.000000] modified: 000000007c6a7000 - 000000007c7b7000 (usable) [ 0.000000] modified: 000000007c7b7000 - 000000007c80f000 (reserved) [ 0.000000] modified: 000000007c80f000 - 000000007c8c7000 (usable) [ 0.000000] modified: 000000007c8c7000 - 000000007c8d2000 (ACPI NVS) [ 0.000000] modified: 000000007c8d2000 - 000000007c8d5000 (ACPI data) [ 0.000000] modified: 000000007c8d5000 - 000000007c8d9000 (reserved) [ 0.000000] modified: 000000007c8d9000 - 000000007c8dd000 (ACPI NVS) [ 0.000000] modified: 000000007c8dd000 - 000000007c8e0000 (reserved) [ 0.000000] modified: 000000007c8e0000 - 000000007c907000 (ACPI NVS) [ 0.000000] modified: 000000007c907000 - 000000007c908000 (ACPI data) [ 0.000000] modified: 000000007c908000 - 000000007cb0f000 (reserved) [ 0.000000] modified: 000000007cb0f000 - 000000007cb9f000 (ACPI NVS) [ 0.000000] modified: 000000007cb9f000 - 000000007cbff000 (ACPI data) [ 0.000000] modified: 000000007cbff000 - 000000007cc00000 (usable) [ 0.000000] modified: 000000007cc00000 - 000000007f000000 (reserved) [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] modified: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] modified: 00000000fed10000 - 00000000fed14000 (reserved) [ 0.000000] modified: 00000000fed18000 - 00000000fed1a000 (reserved) [ 0.000000] modified: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ff800000 - 0000000100000000 (reserved) [ 0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000 [ 0.000000] RAMDISK: 37875000 - 37fefe86 [ 0.000000] Allocated new RAMDISK: 00881000 - 00ffbe86 [ 0.000000] Move RAMDISK from 0000000037875000 - 0000000037fefe85 to 00881000 - 00ffbe85 [ 0.000000] ACPI: RSDP 000F62F0, 0024 (r2 LENOVO) [ 0.000000] ACPI: XSDT 7CB7B8DC, 0094 (r1 LENOVO TP-7W 2020 LTP 0) [ 0.000000] ACPI: FACP 7CB7BA00, 00F4 (r3 LENOVO TP-7W 2020 LNVO 1) [ 0.000000] ACPI: DSDT 7CB7BDDB, DD92 (r1 LENOVO TP-7W 2020 MSFT 3000000) [ 0.000000] ACPI: FACS 7CB8E000, 0040 [ 0.000000] ACPI: SSDT 7CB7BBB4, 0227 (r1 LENOVO TP-7W 2020 MSFT 3000000) [ 0.000000] ACPI: ECDT 7CB89B6D, 0052 (r1 LENOVO TP-7W 2020 LNVO 1) [ 0.000000] ACPI: APIC 7CB89BBF, 0078 (r1 LENOVO TP-7W 2020 LNVO 1) [ 0.000000] ACPI: MCFG 7CB89C37, 003C (r1 LENOVO TP-7W 2020 LNVO 1) [ 0.000000] ACPI: HPET 7CB89C73, 0038 (r1 LENOVO TP-7W 2020 LNVO 1) [ 0.000000] ACPI: SLIC 7CB89DC2, 0176 (r1 LENOVO TP-7W 2020 LTP 0) [ 0.000000] ACPI: BOOT 7CB89F38, 0028 (r1 LENOVO TP-7W 2020 LTP 1) [ 0.000000] ACPI: ASF! 7CB89F60, 00A0 (r16 LENOVO TP-7W 2020 PTL 1) [ 0.000000] ACPI: SSDT 7CB8D203, 055F (r1 LENOVO TP-7W 2020 INTL 20050513) [ 0.000000] ACPI: TCPA 7C907000, 0032 (r0 0 0) [ 0.000000] ACPI: SSDT 7C8D4000, 0655 (r1 PmRef CpuPm 3000 INTL 20050624) [ 0.000000] ACPI: SSDT 7C8D3000, 0274 (r1 PmRef Cpu0Tst 3000 INTL 20050624) [ 0.000000] ACPI: SSDT 7C8D2000, 0242 (r1 PmRef ApTst 3000 INTL 20050624) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 1112MB HIGHMEM available. [ 0.000000] 883MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 373fe000 [ 0.000000] low ram: 00000000 - 373fe000 [ 0.000000] bootmap 00012000 - 00018e80 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 000087c52c] TEXT DATA BSS ==> [0000100000 - 000087c52c] [ 0.000000] #4 [000087d000 - 0000881000] INIT_PG_TABLE ==> [000087d000 - 0000881000] [ 0.000000] #5 [000009ec00 - 0000100000] BIOS reserved ==> [000009ec00 - 0000100000] [ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] [ 0.000000] #7 [0000881000 - 0000ffbe86] NEW RAMDISK ==> [0000881000 - 0000ffbe86] [ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000] [ 0.000000] found SMP MP-table at [c00f6330] 000f6330 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000373fe [ 0.000000] HighMem 0x000373fe -> 0x0007cc00 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[7] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x00000007 [ 0.000000] 0: 0x00000010 -> 0x00000091 [ 0.000000] 0: 0x00000100 -> 0x0007c6a1 [ 0.000000] 0: 0x0007c6a7 -> 0x0007c7b7 [ 0.000000] 0: 0x0007c80f -> 0x0007c8c7 [ 0.000000] 0: 0x0007cbff -> 0x0007cc00 [ 0.000000] On node 0 totalpages: 509934 [ 0.000000] free_area_init_node: node 0, pgdat c06d0f80, node_mem_map c1000000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3940 pages, LIFO batch:0 [ 0.000000] Normal zone: 1736 pages used for memmap [ 0.000000] Normal zone: 220470 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2225 pages used for memmap [ 0.000000] HighMem zone: 281531 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 0000000000007000 - 0000000000010000 [ 0.000000] PM: Registered nosave memory: 0000000000091000 - 000000000009f000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000 [ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 7f000000:61000000) [ 0.000000] PERCPU: Allocating 45056 bytes of per cpu data [ 0.000000] NR_CPUS: 64, nr_cpu_ids: 4, nr_node_ids 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 505941 [ 0.000000] Kernel command line: root=UUID=725f4379-2f56-478d-b0a3-ac575587ce9f ro quiet splash [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1861.849 MHz processor. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.004000] allocated 10219520 bytes of page_cgroup [ 0.004000] please try cgroup_disable=memory option if you don't want [ 0.004000] Scanning for low memory corruption every 60 seconds [ 0.004000] Memory: 1996552k/2043904k available (4126k kernel code, 42340k reserved, 2208k data, 532k init, 1135024k highmem) [ 0.004000] virtual kernel memory layout: [ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB) [ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB) [ 0.004000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB) [ 0.004000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB) [ 0.004000] .init : 0xc0737000 - 0xc07bc000 ( 532 kB) [ 0.004000] .data : 0xc0507a6f - 0xc072fe60 (2208 kB) [ 0.004000] .text : 0xc0100000 - 0xc0507a6f (4126 kB) [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.004000] hpet clockevent registered [ 0.004000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3723.69 BogoMIPS (lpj=7447396) [ 0.004000] Security Framework initialized [ 0.004000] SELinux: Disabled at boot. [ 0.004000] AppArmor: AppArmor initialized [ 0.004000] Mount-cache hash table entries: 512 [ 0.004000] Initializing cgroup subsys ns [ 0.004000] Initializing cgroup subsys cpuacct [ 0.004000] Initializing cgroup subsys memory [ 0.004000] Initializing cgroup subsys freezer [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 6144K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 0 [ 0.004000] using mwait in idle threads. [ 0.004000] Checking 'hlt' instruction... OK. [ 0.018672] ACPI: Core revision 20080926 [ 0.023543] ACPI: Checking initramfs for custom DSDT [ 0.364437] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.405076] CPU0: Intel(R) Core(TM)2 Duo CPU L9400 @ 1.86GHz stepping 06 [ 0.408001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 3723.98 BogoMIPS (lpj=7447973) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 6144K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.493137] CPU1: Intel(R) Core(TM)2 Duo CPU L9400 @ 1.86GHz stepping 06 [ 0.493153] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.496033] Brought up 2 CPUs [ 0.496035] Total of 2 processors activated (7447.68 BogoMIPS). [ 0.496090] CPU0 attaching sched-domain: [ 0.496092] domain 0: span 0-1 level MC [ 0.496095] groups: 0 1 [ 0.496101] CPU1 attaching sched-domain: [ 0.496102] domain 0: span 0-1 level MC [ 0.496105] groups: 1 0 [ 0.496172] net_namespace: 776 bytes [ 0.496172] Booting paravirtualized kernel on bare hardware [ 0.496315] Time: 22:52:43 Date: 05/18/09 [ 0.496315] regulator: core version 0.5 [ 0.496315] NET: Registered protocol family 16 [ 0.496315] EISA bus registered [ 0.496315] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.496315] ACPI: bus type pci registered [ 0.496315] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 63 [ 0.496315] PCI: MCFG area at e0000000 reserved in E820 [ 0.496315] PCI: Using MMCONFIG for extended config space [ 0.496315] PCI: Using configuration type 1 for base access [ 0.500536] ACPI: EC: EC description table is found, configuring boot EC [ 0.507614] ACPI: BIOS _OSI(Linux) query ignored [ 0.504022] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 0.521509] ACPI: Interpreter enabled [ 0.521513] ACPI: (supports S0 S3 S4 S5) [ 0.521534] ACPI: Using IOAPIC for interrupt routing [ 0.544731] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62 [ 0.544734] ACPI: EC: driver started in interrupt mode [ 0.549012] ACPI: ACPI Dock Station Driver: 3 docks/bays found [ 0.549026] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.549110] pci 0000:00:02.0: reg 10 64bit mmio: [0xf2000000-0xf23fffff] [ 0.549118] pci 0000:00:02.0: reg 18 64bit mmio: [0xd0000000-0xdfffffff] [ 0.549123] pci 0000:00:02.0: reg 20 io port: [0x1800-0x1807] [ 0.549154] pci 0000:00:02.1: reg 10 64bit mmio: [0xf2400000-0xf24fffff] [ 0.549210] pci 0000:00:03.0: reg 10 64bit mmio: [0xf2826800-0xf282680f] [ 0.549236] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.549239] pci 0000:00:03.0: PME# disabled [ 0.549272] pci 0000:00:03.2: reg 10 io port: [0x1828-0x182f] [ 0.549278] pci 0000:00:03.2: reg 14 io port: [0x180c-0x180f] [ 0.549283] pci 0000:00:03.2: reg 18 io port: [0x1820-0x1827] [ 0.549289] pci 0000:00:03.2: reg 1c io port: [0x1808-0x180b] [ 0.549294] pci 0000:00:03.2: reg 20 io port: [0x1810-0x181f] [ 0.549339] pci 0000:00:03.3: reg 10 io port: [0x1830-0x1837] [ 0.549345] pci 0000:00:03.3: reg 14 32bit mmio: [0xf2624000-0xf2624fff] [ 0.549462] pci 0000:00:19.0: reg 10 32bit mmio: [0xf2600000-0xf261ffff] [ 0.549470] pci 0000:00:19.0: reg 14 32bit mmio: [0xf2625000-0xf2625fff] [ 0.549478] pci 0000:00:19.0: reg 18 io port: [0x1840-0x185f] [ 0.549513] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.549518] pci 0000:00:19.0: PME# disabled [ 0.549587] pci 0000:00:1a.0: reg 20 io port: [0x1860-0x187f] [ 0.549671] pci 0000:00:1a.1: reg 20 io port: [0x1880-0x189f] [ 0.549756] pci 0000:00:1a.2: reg 20 io port: [0x18a0-0x18bf] [ 0.549840] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf2826c00-0xf2826fff] [ 0.549886] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.549892] pci 0000:00:1a.7: PME# disabled [ 0.549950] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf2620000-0xf2623fff] [ 0.549991] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.549996] pci 0000:00:1b.0: PME# disabled [ 0.550062] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.550067] pci 0000:00:1c.0: PME# disabled [ 0.550136] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.550141] pci 0000:00:1c.1: PME# disabled [ 0.550212] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.550217] pci 0000:00:1c.3: PME# disabled [ 0.550294] pci 0000:00:1d.0: reg 20 io port: [0x18c0-0x18df] [ 0.550378] pci 0000:00:1d.1: reg 20 io port: [0x18e0-0x18ff] [ 0.550463] pci 0000:00:1d.2: reg 20 io port: [0x1c00-0x1c1f] [ 0.550548] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf2827000-0xf28273ff] [ 0.550595] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.550601] pci 0000:00:1d.7: PME# disabled [ 0.550833] pci 0000:00:1f.2: reg 10 io port: [0x1c48-0x1c4f] [ 0.550841] pci 0000:00:1f.2: reg 14 io port: [0x183c-0x183f] [ 0.550849] pci 0000:00:1f.2: reg 18 io port: [0x1c40-0x1c47] [ 0.550857] pci 0000:00:1f.2: reg 1c io port: [0x1838-0x183b] [ 0.550865] pci 0000:00:1f.2: reg 20 io port: [0x1c20-0x1c3f] [ 0.550873] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf2826000-0xf28267ff] [ 0.550893] pci 0000:00:1f.2: PME# supported from D3hot [ 0.550898] pci 0000:00:1f.2: PME# disabled [ 0.550939] pci 0000:00:1f.3: reg 10 64bit mmio: [0xf2827400-0xf28274ff] [ 0.550959] pci 0000:00:1f.3: reg 20 io port: [0x1c60-0x1c7f] [ 0.551142] pci 0000:03:00.0: reg 10 64bit mmio: [0xf2500000-0xf2501fff] [ 0.551218] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.551226] pci 0000:03:00.0: PME# disabled [ 0.551309] pci 0000:00:1c.1: bridge 32bit mmio: [0xf2500000-0xf25fffff] [ 0.552043] pci 0000:00:1c.3: bridge io port: [0x2000-0x2fff] [ 0.552049] pci 0000:00:1c.3: bridge 32bit mmio: [0xf0000000-0xf1ffffff] [ 0.552057] pci 0000:00:1c.3: bridge 64bit mmio pref: [0xf2900000-0xf29fffff] [ 0.552129] pci 0000:00:1e.0: transparent bridge [ 0.552168] bus 00 -> node 0 [ 0.552177] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.552468] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT] [ 0.552618] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] [ 0.552770] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT] [ 0.556813] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) [ 0.557052] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) [ 0.557287] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) [ 0.557522] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) [ 0.557757] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) [ 0.557991] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) [ 0.558225] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11) [ 0.558460] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) [ 0.560063] ACPI: Power Resource [PUBS] (on) [ 0.560388] ACPI: WMI: Mapper loaded [ 0.560540] SCSI subsystem initialized [ 0.560590] libata version 3.00 loaded. [ 0.560633] usbcore: registered new interface driver usbfs [ 0.560648] usbcore: registered new interface driver hub [ 0.560676] usbcore: registered new device driver usb [ 0.560782] PCI: Using ACPI for IRQ routing [ 0.564010] Bluetooth: Core ver 2.13 [ 0.564026] NET: Registered protocol family 31 [ 0.564026] Bluetooth: HCI device and connection manager initialized [ 0.564026] Bluetooth: HCI socket layer initialized [ 0.564026] NET: Registered protocol family 8 [ 0.564026] NET: Registered protocol family 20 [ 0.564033] NetLabel: Initializing [ 0.564035] NetLabel: domain hash size = 128 [ 0.564037] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.564049] NetLabel: unlabeled traffic allowed by default [ 0.564065] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.564070] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.568053] AppArmor: AppArmor Filesystem Enabled [ 0.572010] Switched to high resolution mode on CPU 0 [ 0.573184] Switched to high resolution mode on CPU 1 [ 0.576010] pnp: PnP ACPI init [ 0.576018] ACPI: bus type pnp registered [ 0.641313] pnp: PnP ACPI: found 11 devices [ 0.641315] ACPI: ACPI bus type pnp unregistered [ 0.641318] PnPBIOS: Disabled by ACPI PNP [ 0.641328] system 00:00: iomem range 0x0-0x9ffff could not be reserved [ 0.641331] system 00:00: iomem range 0xc0000-0xc3fff could not be reserved [ 0.641334] system 00:00: iomem range 0xc4000-0xc7fff could not be reserved [ 0.641337] system 00:00: iomem range 0xc8000-0xcbfff has been reserved [ 0.641339] system 00:00: iomem range 0xcc000-0xcffff has been reserved [ 0.641342] system 00:00: iomem range 0xd0000-0xd3fff could not be reserved [ 0.641345] system 00:00: iomem range 0xdc000-0xdffff could not be reserved [ 0.641347] system 00:00: iomem range 0xe0000-0xe3fff could not be reserved [ 0.641350] system 00:00: iomem range 0xe4000-0xe7fff could not be reserved [ 0.641353] system 00:00: iomem range 0xe8000-0xebfff could not be reserved [ 0.641355] system 00:00: iomem range 0xec000-0xeffff could not be reserved [ 0.641358] system 00:00: iomem range 0xf0000-0xfffff could not be reserved [ 0.641360] system 00:00: iomem range 0x100000-0x7effffff could not be reserved [ 0.641363] system 00:00: iomem range 0xfec00000-0xfed3ffff could not be reserved [ 0.641366] system 00:00: iomem range 0xfed4c000-0xffffffff could not be reserved [ 0.641374] system 00:02: ioport range 0x164e-0x164f has been reserved [ 0.641376] system 00:02: ioport range 0x1000-0x107f has been reserved [ 0.641379] system 00:02: ioport range 0x1180-0x11ff has been reserved [ 0.641381] system 00:02: ioport range 0x800-0x80f has been reserved [ 0.641384] system 00:02: ioport range 0x15e0-0x15ef has been reserved [ 0.641387] system 00:02: ioport range 0x1600-0x1641 has been reserved [ 0.641389] system 00:02: ioport range 0x1600-0x161b has been reserved [ 0.641392] system 00:02: iomem range 0xe0000000-0xefffffff has been reserved [ 0.641395] system 00:02: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.641398] system 00:02: iomem range 0xfed10000-0xfed13fff has been reserved [ 0.641401] system 00:02: iomem range 0xfed18000-0xfed18fff has been reserved [ 0.641403] system 00:02: iomem range 0xfed19000-0xfed19fff has been reserved [ 0.641406] system 00:02: iomem range 0xfed45000-0xfed4bfff has been reserved [ 0.676120] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 [ 0.676122] pci 0000:00:1c.0: IO window: disabled [ 0.676128] pci 0000:00:1c.0: MEM window: disabled [ 0.676133] pci 0000:00:1c.0: PREFETCH window: disabled [ 0.676141] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03 [ 0.676143] pci 0000:00:1c.1: IO window: disabled [ 0.676149] pci 0000:00:1c.1: MEM window: 0xf2500000-0xf25fffff [ 0.676154] pci 0000:00:1c.1: PREFETCH window: disabled [ 0.676161] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:05 [ 0.676165] pci 0000:00:1c.3: IO window: 0x2000-0x2fff [ 0.676171] pci 0000:00:1c.3: MEM window: 0xf0000000-0xf1ffffff [ 0.676176] pci 0000:00:1c.3: PREFETCH window: 0x000000f2900000-0x000000f29fffff [ 0.676184] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0d [ 0.676186] pci 0000:00:1e.0: IO window: disabled [ 0.676192] pci 0000:00:1e.0: MEM window: disabled [ 0.676196] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.676213] pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.676218] pci 0000:00:1c.0: setting latency timer to 64 [ 0.676228] pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.676233] pci 0000:00:1c.1: setting latency timer to 64 [ 0.676243] pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 0.676248] pci 0000:00:1c.3: setting latency timer to 64 [ 0.676256] pci 0000:00:1e.0: setting latency timer to 64 [ 0.676260] bus: 00 index 0 io port: [0x00-0xffff] [ 0.676263] bus: 00 index 1 mmio: [0x000000-0xffffffff] [ 0.676265] bus: 02 index 0 mmio: [0x0-0x0] [ 0.676266] bus: 02 index 1 mmio: [0x0-0x0] [ 0.676268] bus: 02 index 2 mmio: [0x0-0x0] [ 0.676270] bus: 02 index 3 mmio: [0x0-0x0] [ 0.676272] bus: 03 index 0 mmio: [0x0-0x0] [ 0.676274] bus: 03 index 1 mmio: [0xf2500000-0xf25fffff] [ 0.676275] bus: 03 index 2 mmio: [0x0-0x0] [ 0.676277] bus: 03 index 3 mmio: [0x0-0x0] [ 0.676279] bus: 05 index 0 io port: [0x2000-0x2fff] [ 0.676281] bus: 05 index 1 mmio: [0xf0000000-0xf1ffffff] [ 0.676283] bus: 05 index 2 mmio: [0xf2900000-0xf29fffff] [ 0.676285] bus: 05 index 3 mmio: [0x0-0x0] [ 0.676287] bus: 0d index 0 mmio: [0x0-0x0] [ 0.676289] bus: 0d index 1 mmio: [0x0-0x0] [ 0.676291] bus: 0d index 2 mmio: [0x0-0x0] [ 0.676292] bus: 0d index 3 io port: [0x00-0xffff] [ 0.676295] bus: 0d index 4 mmio: [0x000000-0xffffffff] [ 0.676302] NET: Registered protocol family 2 [ 0.688552] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.688783] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.689055] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.689197] TCP: Hash tables configured (established 131072 bind 65536) [ 0.689199] TCP reno registered [ 0.692563] NET: Registered protocol family 1 [ 0.692673] checking if image is initramfs... it is [ 1.360535] Freeing initrd memory: 7659k freed [ 1.360571] Simple Boot Flag at 0x35 set to 0x1 [ 1.360731] cpufreq: No nForce2 chipset. [ 1.360860] audit: initializing netlink socket (disabled) [ 1.360875] type=2000 audit(1242687163.360:1): initialized [ 1.368561] highmem bounce pool size: 64 pages [ 1.368566] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 1.369888] VFS: Disk quotas dquot_6.5.1 [ 1.369948] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.370554] fuse init (API version 7.10) [ 1.370639] msgmni has been set to 1699 [ 1.370817] alg: No test for stdrng (krng) [ 1.370828] io scheduler noop registered [ 1.370831] io scheduler anticipatory registered [ 1.370833] io scheduler deadline registered [ 1.370846] io scheduler cfq registered (default) [ 1.370857] pci 0000:00:02.0: Boot video device [ 1.459934] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 1.459984] pcieport-driver 0000:00:1c.0: found MSI capability [ 1.460020] pcieport-driver 0000:00:1c.0: irq 2303 for MSI/MSI-X [ 1.460036] pci_express 0000:00:1c.0:pcie00: allocate port service [ 1.460050] pci_express 0000:00:1c.0:pcie02: allocate port service [ 1.460062] pci_express 0000:00:1c.0:pcie03: allocate port service [ 1.460135] pcieport-driver 0000:00:1c.1: setting latency timer to 64 [ 1.460184] pcieport-driver 0000:00:1c.1: found MSI capability [ 1.460217] pcieport-driver 0000:00:1c.1: irq 2302 for MSI/MSI-X [ 1.460232] pci_express 0000:00:1c.1:pcie00: allocate port service [ 1.460245] pci_express 0000:00:1c.1:pcie02: allocate port service [ 1.460257] pci_express 0000:00:1c.1:pcie03: allocate port service [ 1.460330] pcieport-driver 0000:00:1c.3: setting latency timer to 64 [ 1.460378] pcieport-driver 0000:00:1c.3: found MSI capability [ 1.460411] pcieport-driver 0000:00:1c.3: irq 2301 for MSI/MSI-X [ 1.460426] pci_express 0000:00:1c.3:pcie00: allocate port service [ 1.460439] pci_express 0000:00:1c.3:pcie02: allocate port service [ 1.460451] pci_express 0000:00:1c.3:pcie03: allocate port service [ 1.460543] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.461193] pciehp 0000:00:1c.0:pcie02: HPC vendor_id 8086 device_id 2940 ss_vid 0 ss_did 0 [ 1.461236] pciehp 0000:00:1c.0:pcie02: service driver pciehp loaded [ 1.461854] pciehp 0000:00:1c.1:pcie02: HPC vendor_id 8086 device_id 2942 ss_vid 0 ss_did 0 [ 1.461891] pciehp 0000:00:1c.1:pcie02: service driver pciehp loaded [ 1.462507] pciehp 0000:00:1c.3:pcie02: HPC vendor_id 8086 device_id 2946 ss_vid 0 ss_did 0 [ 1.462543] pciehp 0000:00:1c.3:pcie02: service driver pciehp loaded [ 1.462552] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.463275] ACPI: AC Adapter [AC] (on-line) [ 1.501427] ACPI: Battery Slot [BAT0] (battery present) [ 1.501500] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.501502] ACPI: Power Button (FF) [PWRF] [ 1.501547] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 [ 1.502596] ACPI: Lid Switch [LID] [ 1.502644] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 [ 1.502650] ACPI: Sleep Button (CM) [SLPB] [ 1.503435] ACPI: SSDT 7C8D7C20, 02C8 (r1 PmRef Cpu0Ist 3000 INTL 20050624) [ 1.503981] ACPI: SSDT 7C8D5020, 087A (r1 PmRef Cpu0Cst 3001 INTL 20050624) [ 1.507528] Monitor-Mwait will be used to enter C-1 state [ 1.507532] Monitor-Mwait will be used to enter C-2 state [ 1.507535] Monitor-Mwait will be used to enter C-3 state [ 1.507551] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 1.507574] processor ACPI_CPU:00: registered as cooling_device0 [ 1.507578] ACPI: Processor [CPU0] (supports 8 throttling states) [ 1.508133] ACPI: SSDT 7C8D6CA0, 01CF (r1 PmRef ApIst 3000 INTL 20050624) [ 1.508690] ACPI: SSDT 7C8D6F20, 008D (r1 PmRef ApCst 3000 INTL 20050624) [ 1.511511] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 1.511530] processor ACPI_CPU:01: registered as cooling_device1 [ 1.511534] ACPI: Processor [CPU1] (supports 8 throttling states) [ 1.558174] thermal LNXTHERM:01: registered as thermal_zone0 [ 1.561895] ACPI: Thermal Zone [THM0] (37 C) [ 1.562977] thermal LNXTHERM:02: registered as thermal_zone1 [ 1.564377] ACPI: Thermal Zone [THM1] (32 C) [ 1.564429] isapnp: Scanning for PnP cards... [ 1.918842] isapnp: No Plug & Play device found [ 1.928144] Serial: 8250/16550 driver4 ports, IRQ sharing enabled [ 1.929075] serial 00:0a: activated [ 1.929223] 00:0a: ttyS0 at I/O 0x200 (irq = 5) is a 16550A [ 1.929274] serial 0000:00:03.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.929331] 0000:00:03.3: ttyS1 at I/O 0x1830 (irq = 17) is a 16550A [ 1.930016] brd: module loaded [ 1.930329] loop: module loaded [ 1.930390] Fixed MDIO Bus: probed [ 1.930396] PPP generic driver version 2.4.2 [ 1.930454] input: Macintosh mouse button emulation as /devices/virtual/input/input3 [ 1.930482] Driver 'sd' needs updating - please use bus_type methods [ 1.930491] Driver 'sr' needs updating - please use bus_type methods [ 1.930532] ahci 0000:00:1f.2: version 3.0 [ 1.930542] ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 1.930580] ahci 0000:00:1f.2: irq 2300 for MSI/MSI-X [ 1.930659] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode [ 1.930662] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part [ 1.930667] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.930884] scsi0 : ahci [ 1.930963] scsi1 : ahci [ 1.931023] scsi2 : ahci [ 1.931081] scsi3 : ahci [ 1.931664] ata1: SATA max UDMA/133 abar m2048@0xf2826000 port 0xf2826100 irq 2300 [ 1.931668] ata2: SATA max UDMA/133 abar m2048@0xf2826000 port 0xf2826180 irq 2300 [ 1.931671] ata3: DUMMY [ 1.931672] ata4: DUMMY [ 2.248020] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.249157] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded [ 2.249160] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out [ 2.249355] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded [ 2.249358] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out [ 2.250219] ata1.00: ATA-8: HITACHI HTS723216L9SA60, FC2ZC50A, max UDMA/100 [ 2.250222] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 2.251542] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded [ 2.251544] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out [ 2.251737] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded [ 2.251740] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out [ 2.252616] ata1.00: configured for UDMA/100 [ 2.269989] ata1.00: configured for UDMA/100 [ 2.269992] ata1: EH complete [ 2.588017] ata2: SATA link down (SStatus 0 SControl 300) [ 2.604123] scsi 0:0:0:0: Direct-Access ATA HITACHI HTS72321 FC2Z PQ: 0 ANSI: 5 [ 2.604213] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB) [ 2.604229] sd 0:0:0:0: [sda] Write Protect is off [ 2.604232] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.604257] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.604311] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB) [ 2.604326] sd 0:0:0:0: [sda] Write Protect is off [ 2.604328] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.604353] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.604357] sda: sda1 sda2 < sda5 sda6 > [ 2.665305] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.665342] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.665985] pata_acpi 0000:00:03.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 2.666013] pata_acpi 0000:00:03.2: setting latency timer to 64 [ 2.666023] pata_acpi 0000:00:03.2: PCI INT C disabled [ 2.666107] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.666570] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [ 2.666577] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 2.666589] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 2.666592] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 2.666645] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 2.670561] ehci_hcd 0000:00:1a.7: debug port 1 [ 2.670568] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 2.670581] ehci_hcd 0000:00:1a.7: irq 23, io mem 0xf2826c00 [ 2.684010] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 2.684074] usb usb1: configuration #1 chosen from 1 choice [ 2.684100] hub 1-0:1.0: USB hub found [ 2.684107] hub 1-0:1.0: 6 ports detected [ 2.684746] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [ 2.684755] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 2.684766] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 2.684770] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 2.684812] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 2.688722] ehci_hcd 0000:00:1d.7: debug port 1 [ 2.688729] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 2.688742] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xf2827000 [ 2.704010] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 2.704066] usb usb2: configuration #1 chosen from 1 choice [ 2.704091] hub 2-0:1.0: USB hub found [ 2.704104] hub 2-0:1.0: 6 ports detected [ 2.704198] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.704214] uhci_hcd: USB Universal Host Controller Interface driver [ 2.704815] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 2.704820] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 2.704827] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 2.704830] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 2.704872] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 2.704906] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860 [ 2.704977] usb usb3: configuration #1 chosen from 1 choice [ 2.705005] hub 3-0:1.0: USB hub found [ 2.705011] hub 3-0:1.0: 2 ports detected [ 2.705098] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 2.705104] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 2.705107] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 2.705149] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 2.705183] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880 [ 2.705258] usb usb4: configuration #1 chosen from 1 choice [ 2.705283] hub 4-0:1.0: USB hub found [ 2.705290] hub 4-0:1.0: 2 ports detected [ 2.705928] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [ 2.705934] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 2.705941] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 2.705944] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 2.705986] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 2.706019] uhci_hcd 0000:00:1a.2: irq 22, io base 0x000018a0 [ 2.706091] usb usb5: configuration #1 chosen from 1 choice [ 2.706115] hub 5-0:1.0: USB hub found [ 2.706122] hub 5-0:1.0: 2 ports detected [ 2.706799] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 2.706804] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.706810] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 2.706814] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 2.706856] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 2.706889] uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018c0 [ 2.706969] usb usb6: configuration #1 chosen from 1 choice [ 2.706996] hub 6-0:1.0: USB hub found [ 2.707004] hub 6-0:1.0: 2 ports detected [ 2.707084] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 2.707092] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 2.707096] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 2.707135] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 2.707169] uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018e0 [ 2.707241] usb usb7: configuration #1 chosen from 1 choice [ 2.707265] hub 7-0:1.0: USB hub found [ 2.707272] hub 7-0:1.0: 2 ports detected [ 2.707355] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 2.707362] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 2.707365] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 2.707409] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 2.707442] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001c00 [ 2.707512] usb usb8: configuration #1 chosen from 1 choice [ 2.707536] hub 8-0:1.0: USB hub found [ 2.707544] hub 8-0:1.0: 2 ports detected [ 2.707669] usbcore: registered new interface driver libusual [ 2.707698] usbcore: registered new interface driver usbserial [ 2.707709] USB Serial support registered for generic [ 2.707725] usbcore: registered new interface driver usbserial_generic [ 2.707727] usbserial: USB Serial Driver core [ 2.707772] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 2.717965] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.717971] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.720536] mice: PS/2 mouse device common for all mice [ 2.736565] rtc_cmos 00:07: RTC can wake from S4 [ 2.736593] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 2.736623] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 2.736679] device-mapper: uevent: version 1.0.3 [ 2.736755] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com [ 2.736824] device-mapper: multipath: version 1.0.5 loaded [ 2.736826] device-mapper: multipath round-robin: version 1.0.0 loaded [ 2.736901] EISA: Probing bus 0 at eisa.0 [ 2.736907] Cannot allocate resource for EISA slot 1 [ 2.736910] Cannot allocate resource for EISA slot 2 [ 2.736937] EISA: Detected 0 cards. [ 2.737048] cpuidle: using governor ladder [ 2.737166] cpuidle: using governor menu [ 2.737669] TCP cubic registered [ 2.737762] NET: Registered protocol family 10 [ 2.738189] lo: Disabled Privacy Extensions [ 2.738519] NET: Registered protocol family 17 [ 2.738543] Marking TSC unstable due to TSC halts in idle [ 2.738544] Bluetooth: L2CAP ver 2.11 [ 2.738546] Bluetooth: L2CAP socket layer initialized [ 2.738549] Bluetooth: SCO (Voice Link) ver 0.6 [ 2.738551] Bluetooth: SCO socket layer initialized [ 2.738598] Bluetooth: RFCOMM socket layer initialized [ 2.738603] Bluetooth: RFCOMM TTY layer initialized [ 2.738604] Bluetooth: RFCOMM ver 1.10 [ 2.739539] Using IPI No-Shortcut mode [ 2.739601] registered taskstats version 1 [ 2.739720] Magic number: 9:21:907 [ 2.739808] rtc_cmos 00:07: setting system clock to 2009-05-18 22:52:45 UTC (1242687165) [ 2.739811] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.739813] EDD information not available. [ 2.740153] Freeing unused kernel memory: 532k freed [ 2.740325] Write protecting the kernel text: 4128k [ 2.740405] Write protecting the kernel read-only data: 1532k [ 2.741179] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 2.952513] e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k6 [ 2.952516] e1000e: Copyright (c) 1999-2008 Intel Corporation. [ 2.952562] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 2.952571] e1000e 0000:00:19.0: setting latency timer to 64 [ 2.952700] e1000e 0000:00:19.0: irq 2299 for MSI/MSI-X [ 3.051203] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1f:16:12:2a:61 [ 3.051206] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection [ 3.051259] 0000:00:19.0: eth0: MAC: 6, PHY: 8, PBA No: 1008ff-0ff [ 3.241484] PM: Starting manual resume from disk [ 3.241487] PM: Resume from partition 8:6 [ 3.241489] PM: Checking hibernation image. [ 3.241669] PM: Resume from disk failed. [ 3.243771] EXT3-fs: INFO: recovery required on readonly filesystem. [ 3.243775] EXT3-fs: write access will be enabled during recovery. [ 3.248065] usb 1-6: new high speed USB device using ehci_hcd and address 4 [ 3.386331] usb 1-6: configuration #1 chosen from 1 choice [ 3.500052] Clocksource tsc unstable (delta = -105467051 ns) [ 3.628067] usb 4-1: new full speed USB device using uhci_hcd and address 2 [ 3.795483] usb 4-1: configuration #1 chosen from 1 choice [ 4.036623] usb 4-2: new full speed USB device using uhci_hcd and address 3 [ 4.206347] usb 4-2: configuration #1 chosen from 1 choice [ 5.111700] kjournald starting. Commit interval 5 seconds [ 5.111711] EXT3-fs: sda1: orphan cleanup on readonly fs [ 5.111715] ext3_orphan_cleanup: deleting unreferenced inode 147277 [ 5.111741] ext3_orphan_cleanup: deleting unreferenced inode 147256 [ 5.111750] ext3_orphan_cleanup: deleting unreferenced inode 147212 [ 5.111757] ext3_orphan_cleanup: deleting unreferenced inode 180042 [ 5.111763] ext3_orphan_cleanup: deleting unreferenced inode 180026 [ 5.111769] ext3_orphan_cleanup: deleting unreferenced inode 180011 [ 5.111775] ext3_orphan_cleanup: deleting unreferenced inode 179994 [ 5.111780] ext3_orphan_cleanup: deleting unreferenced inode 179980 [ 5.111785] EXT3-fs: sda1: 8 orphan inodes deleted [ 5.111787] EXT3-fs: recovery complete. [ 5.152227] EXT3-fs: mounted filesystem with ordered data mode. [ 10.360822] udev: starting version 141 [ 10.459194] Bluetooth: Generic Bluetooth USB driver ver 0.3 [ 10.459309] usbcore: registered new interface driver btusb [ 10.478634] Linux agpgart interface v0.103 [ 10.489149] acpi device:03: registered as cooling_device2 [ 10.489852] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/input/input5 [ 10.516098] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 10.524526] agpgart-intel 0000:00:00.0: Intel Mobile Intel® GM45 Express Chipset [ 10.526578] agpgart-intel 0000:00:00.0: detected 32764K stolen memory [ 10.531058] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 10.611502] Linux video capture interface: v2.00 [ 10.654601] iTCO_vendor_support: vendor-support=0 [ 10.712178] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 [ 10.712341] iTCO_wdt: Found a ICH9M-E TCO device (Version=2, TCOBASE=0x1060) [ 10.712463] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 10.719983] cfg80211: Calling CRDA to update world regulatory domain [ 10.777638] Non-volatile memory driver v1.2 [ 10.805219] uvcvideo: Found UVC 1.00 device (17ef:480c) [ 10.805928] input: UVC Camera (17ef:480c) as /devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input6 [ 10.806286] usbcore: registered new interface driver uvcvideo [ 10.806289] USB Video Class driver (v0.1.0) [ 10.822508] cfg80211: World regulatory domain updated: [ 10.822511] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 10.822513] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 10.822516] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 10.822518] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 10.822520] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 10.822523] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 11.024833] thinkpad_acpi: ThinkPad ACPI Extras v0.21 [ 11.024835] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 11.024837] thinkpad_acpi: ThinkPad BIOS 7WET31WW (2.02 ), EC 7WHT14WW-1.01 [ 11.024839] thinkpad_acpi: Lenovo ThinkPad X200T, model 7448CTO [ 11.025595] thinkpad_acpi: radio switch found; radios are enabled [ 11.026961] thinkpad_acpi: possible tablet mode switch found; ThinkPad in laptop mode [ 11.027078] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver [ 11.027080] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... [ 11.037039] Registered led device: tpacpi::thinklight [ 11.037072] Registered led device: tpacpi::power [ 11.037094] Registered led device: tpacpi:orange:batt [ 11.037109] Registered led device: tpacpi:green:batt [ 11.037124] Registered led device: tpacpi::dock_active [ 11.037141] Registered led device: tpacpi::bay_active [ 11.037157] Registered led device: tpacpi::dock_batt [ 11.037172] Registered led device: tpacpi::unknown_led [ 11.037187] Registered led device: tpacpi::standby [ 11.039988] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one. [ 11.040328] input: ThinkPad Extra Buttons as /devices/virtual/input/input7 [ 11.093457] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume [ 11.098849] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks [ 11.098851] iwlagn: Copyright(c) 2003-2008 Intel Corporation [ 11.098914] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 11.098923] iwlagn 0000:03:00.0: setting latency timer to 64 [ 11.099021] iwlagn: Detected Intel Wireless WiFi Link 5300AGN REV=0x24 [ 11.119060] iwlagn: Tunable channels: 13 802.11bg, 24 802.11a channels [ 11.119130] iwlagn 0000:03:00.0: irq 2298 for MSI/MSI-X [ 11.125876] phy0: Selected rate control algorithm 'iwl-agn-rs' [ 11.268827] psmouse serio1: ID: 10 00 64<6>HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 11.401048] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 11.610022] IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 11.619037] lp: driver loaded but no devices found [ 11.626906] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input8 [ 11.756738] Adding 7815580k swap on /dev/sda6. Priority:-1 extents:1 across:7815580k [ 12.289889] EXT3 FS on sda1, internal journal [ 17.784415] kjournald starting. Commit interval 5 seconds [ 17.784791] EXT3 FS on sda5, internal journal [ 17.784796] EXT3-fs: mounted filesystem with ordered data mode. [ 17.948848] type=1505 audit(1242687180.708:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2311 [ 17.989228] type=1505 audit(1242687180.748:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2315 [ 17.989301] type=1505 audit(1242687180.748:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2315 [ 17.989339] type=1505 audit(1242687180.748:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2315 [ 17.989376] type=1505 audit(1242687180.748:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2315 [ 18.099855] type=1505 audit(1242687180.856:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2320 [ 18.099968] type=1505 audit(1242687180.856:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2320 [ 18.128321] type=1505 audit(1242687180.888:9): operation="profile_load" name="/usr/sbin/mysqld" name2="default" pid=2324 [ 18.150607] type=1505 audit(1242687180.908:10): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2328 [ 24.834417] vboxdrv: Trying to deactivate the NMI watchdog permanently... [ 24.834420] vboxdrv: Successfully done. [ 24.834422] vboxdrv: Found 2 processor cores. [ 24.834534] vboxdrv: fAsync=0 offMin=0x1e3 offMax=0xf1aa [ 24.834575] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 24.834577] vboxdrv: Successfully loaded version 2.1.4_OSE (interface 0x000a0009). [ 26.288048] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 26.288051] Bluetooth: BNEP filters: protocol multicast [ 26.308820] Bridge firewalling registered [ 27.420550] ppdev: user-space parallel port driver [ 28.068884] [drm] Initialized drm 1.1.0 20060810 [ 28.077776] pci 0000:00:02.0: power state changed by ACPI to D0 [ 28.077783] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 28.077788] pci 0000:00:02.0: setting latency timer to 64 [ 28.078049] pci 0000:00:02.0: irq 2297 for MSI/MSI-X [ 28.078136] [drm] Initialized i915 1.6.0 20080730 on minor 0 [ 28.084327] [drm:i915_setparam] *ERROR* unknown parameter 4 [ 31.256820] e1000e 0000:00:19.0: irq 2299 for MSI/MSI-X [ 31.312169] e1000e 0000:00:19.0: irq 2299 for MSI/MSI-X [ 31.312540] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 31.313187] iwlagn 0000:03:00.0: firmware: requesting iwlwifi-5000-1.ucode [ 31.574281] Registered led device: iwl-phy0:radio [ 31.574299] Registered led device: iwl-phy0:assoc [ 31.574314] Registered led device: iwl-phy0:RX [ 31.574327] Registered led device: iwl-phy0:TX [ 31.653461] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 64.943819] CPU0 attaching NULL sched-domain. [ 64.943823] CPU1 attaching NULL sched-domain. [ 64.944356] CPU0 attaching sched-domain: [ 64.944359] domain 0: span 0-1 level MC [ 64.944361] groups: 0 1 [ 64.944367] CPU1 attaching sched-domain: [ 64.944369] domain 0: span 0-1 level MC [ 64.944371] groups: 1 0 [ 65.413970] CPU0 attaching NULL sched-domain. [ 65.413974] CPU1 attaching NULL sched-domain. [ 65.416654] CPU0 attaching sched-domain: [ 65.416658] domain 0: span 0-1 level MC [ 65.416661] groups: 0 1 [ 65.416668] CPU1 attaching sched-domain: [ 65.416671] domain 0: span 0-1 level MC [ 65.416675] groups: 1 0 [ 80.369912] wlan0: authenticate with AP 00:1a:70:da:44:1b [ 80.371882] wlan0: authenticated [ 80.371885] wlan0: associate with AP 00:1a:70:da:44:1b [ 80.374381] wlan0: RX AssocResp from 00:1a:70:da:44:1b (capab=0x411 status=0 aid=2) [ 80.374384] wlan0: associated [ 80.379192] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 82.240679] phy0: failed to restore operational channel after scan [ 91.232518] wlan0: no IPv6 routers present [ 238.157075] tracker-extract[5023]: segfault at 0 ip b7c5c656 sp bfd4ef64 error 4 in libc-2.9.so[b7be3000+15c000] [ 238.415995] tracker-extract[5109]: segfault at 0 ip b7c46656 sp bfa38444 error 4 in libc-2.9.so[b7bcd000+15c000] [ 238.628148] tracker-extract[5111]: segfault at 0 ip b7d79656 sp bff6c174 error 4 in libc-2.9.so[b7d00000+15c000] [ 238.866959] tracker-extract[5113]: segfault at 0 ip b7cfc656 sp bf9eec04 error 4 in libc-2.9.so[b7c83000+15c000] [ 239.337480] tracker-extract[5115]: segfault at 0 ip b7d4f656 sp bf943354 error 4 in libc-2.9.so[b7cd6000+15c000] [ 239.520839] tracker-extract[5117]: segfault at 0 ip b7d4f656 sp bfa43454 error 4 in libc-2.9.so[b7cd6000+15c000] [ 239.762477] tracker-extract[5119]: segfault at 0 ip b7c72656 sp bfd64774 error 4 in libc-2.9.so[b7bf9000+15c000] [ 239.946436] tracker-extract[5121]: segfault at 0 ip b7de4656 sp bfcd86e4 error 4 in libc-2.9.so[b7d6b000+15c000] [ 4138.959528] CPU0 attaching NULL sched-domain. [ 4138.959537] CPU1 attaching NULL sched-domain. [ 4138.964135] CPU0 attaching sched-domain: [ 4138.964142] domain 0: span 0-1 level MC [ 4138.964148] groups: 0 1 [ 4138.964159] CPU1 attaching sched-domain: [ 4138.964164] domain 0: span 0-1 level MC [ 4138.964169] groups: 1 0 [ 4139.288142] usb 4-2: USB disconnect, address 3 [ 4139.288792] btusb_intr_complete: hci0 urb ece87700 failed to resubmit (19) [ 4139.288811] btusb_bulk_complete: hci0 urb ece87b00 failed to resubmit (19) [ 4139.289785] btusb_bulk_complete: hci0 urb ece87f80 failed to resubmit (19) [ 4139.290260] btusb_send_frame: hci0 urb f62cb700 submission failed [ 4139.577597] wlan0: disassociating by local choice (reason=3) [ 4139.585438] wlan0: deauthenticated [ 4140.690306] [drm:gm45_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0 [ 4141.044765] PM: Syncing filesystems ... done. [ 4141.068187] PM: Preparing system for mem sleep [ 4141.068191] Freezing user space processes ... (elapsed 0.00 seconds) done. [ 4141.069139] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [ 4141.069196] PM: Entering mem sleep [ 4141.069208] Suspending console(s) (use no_console_suspend to debug) [ 4141.084198] pci 0000:00:02.0: power state changed by ACPI to D3 [ 4141.788296] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 4141.788496] sd 0:0:0:0: [sda] Stopping disk [ 4142.236609] pciehp 0000:00:1c.3:pcie02: pciehp_suspend ENTRY [ 4142.236612] pciehp 0000:00:1c.1:pcie02: pciehp_suspend ENTRY [ 4142.236615] pciehp 0000:00:1c.0:pcie02: pciehp_suspend ENTRY [ 4142.236753] serial 00:0a: disabled [ 4142.300273] ehci_hcd 0000:00:1d.7: PCI INT D disabled [ 4142.319754] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3 [ 4142.319804] uhci_hcd 0000:00:1d.2: PCI INT C disabled [ 4142.319850] uhci_hcd 0000:00:1d.1: PCI INT B disabled [ 4142.319896] uhci_hcd 0000:00:1d.0: PCI INT A disabled [ 4142.319899] pciehp 0000:00:1c.3:pcie02: pciehp_suspend ENTRY [ 4142.319948] pciehp 0000:00:1c.1:pcie02: pciehp_suspend ENTRY [ 4142.319997] pciehp 0000:00:1c.0:pcie02: pciehp_suspend ENTRY [ 4142.332944] HDA Intel 0000:00:1b.0: PCI INT B disabled [ 4142.348174] ehci_hcd 0000:00:1a.7: PCI INT D disabled [ 4142.365637] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D3 [ 4142.365686] uhci_hcd 0000:00:1a.2: PCI INT C disabled [ 4142.365732] uhci_hcd 0000:00:1a.1: PCI INT B disabled [ 4142.365779] uhci_hcd 0000:00:1a.0: PCI INT A disabled [ 4142.366002] e1000e 0000:00:19.0: PME# enabled [ 4142.366007] e1000e 0000:00:19.0: wake-up capability enabled by ACPI [ 4142.366011] e1000e 0000:00:19.0: PME# enabled [ 4142.366012] e1000e 0000:00:19.0: wake-up capability enabled by ACPI [ 4142.366018] e1000e 0000:00:19.0: PCI INT A disabled [ 4142.380147] ACPI handle has no context! [ 4142.396264] PM: suspend devices took 1.328 seconds [ 4142.401442] ACPI: Preparing to enter system sleep state S3 [ 4142.416596] Disabling non-boot CPUs ... [ 4142.418858] NOHZ: local_softirq_pending 100 [ 4142.520022] CPU 1 is now offline [ 4142.520025] SMP alternatives: switching to UP code [ 4142.641835] CPU0 attaching NULL sched-domain. [ 4142.641838] CPU1 attaching NULL sched-domain. [ 4142.642108] CPU0 attaching NULL sched-domain. [ 4142.642246] CPU1 is down [ 4142.642317] Extended CMOS year: 2000 [ 4142.642317] Back to C! [ 4142.642317] Extended CMOS year: 2000 [ 4142.642317] Enabling non-boot CPUs ... [ 4142.642317] SMP alternatives: switching to SMP code [ 4142.794025] Booting processor 1 APIC 0x1 ip 0x6000 [ 4142.641697] Initializing CPU#1 [ 4142.641697] Calibrating delay using timer specific routine.. 3724.04 BogoMIPS (lpj=7448097) [ 4142.641697] CPU: L1 I cache: 32K, L1 D cache: 32K [ 4142.641697] CPU: L2 cache: 6144K [ 4142.641697] CPU: Physical Processor ID: 0 [ 4142.641697] CPU: Processor Core ID: 1 [ 4142.885145] CPU1: Intel(R) Core(TM)2 Duo CPU L9400 @ 1.86GHz stepping 06 [ 4142.885196] CPU0 attaching NULL sched-domain. [ 4142.886025] CPU0 attaching sched-domain: [ 4142.886029] domain 0: span 0-1 level MC [ 4142.886031] groups: 0 1 [ 4142.886035] CPU1 attaching sched-domain: [ 4142.886037] domain 0: span 0-1 level MC [ 4142.886038] groups: 1 0 [ 4142.888019] Switched to high resolution mode on CPU 1 [ 4142.888030] CPU1 is up [ 4142.888032] ACPI: Waking up from system sleep state S3 [ 4142.905075] APIC error on CPU0: 00(40) [ 4143.048165] ACPI: \_SB_.GDCK - docking [ 4143.077640] acpi device:27: parent device:14 should not be sleeping [ 4143.080005] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 4143.123551] pci 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900403) [ 4143.127570] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007) [ 4143.127581] pci 0000:00:03.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 4143.127593] pci 0000:00:03.0: restoring config space at offset 0x1 (was 0x100006, writing 0x180006) [ 4143.127604] pci 0000:00:03.2: restoring config space at offset 0xf (was 0x300, writing 0x30b) [ 4143.127615] pci 0000:00:03.2: restoring config space at offset 0x1 (was 0xb00005, writing 0xb00001) [ 4143.140116] serial 0000:00:03.3: restoring config space at offset 0xf (was 0x200, writing 0x20b) [ 4143.156175] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 4143.156181] e1000e 0000:00:19.0: setting latency timer to 64 [ 4143.156186] e1000e 0000:00:19.0: wake-up capability disabled by ACPI [ 4143.156191] e1000e 0000:00:19.0: PME# disabled [ 4143.156193] e1000e 0000:00:19.0: wake-up capability disabled by ACPI [ 4143.156198] e1000e 0000:00:19.0: PME# disabled [ 4143.156238] e1000e 0000:00:19.0: irq 2299 for MSI/MSI-X [ 4143.202525] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 4143.202530] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 4143.202536] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 4143.202599] usb usb3: root hub lost power or was reset [ 4143.202618] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 4143.202623] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 4143.202686] usb usb4: root hub lost power or was reset [ 4143.203425] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [ 4143.203429] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 4143.203434] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 4143.203490] usb usb5: root hub lost power or was reset [ 4143.204163] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [ 4143.204169] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 4143.204174] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 4143.220152] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102) [ 4143.220173] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 4143.220180] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 4143.220223] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x7 (was 0xf0, writing 0x200000f0) [ 4143.220237] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [ 4143.220283] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 4143.220287] pciehp 0000:00:1c.0:pcie02: pciehp_resume ENTRY [ 4143.220313] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x7 (was 0xf0, writing 0x200000f0) [ 4143.220325] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [ 4143.220364] pcieport-driver 0000:00:1c.1: setting latency timer to 64 [ 4143.220367] pciehp 0000:00:1c.1:pcie02: pciehp_resume ENTRY [ 4143.220401] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [ 4143.220439] pcieport-driver 0000:00:1c.3: setting latency timer to 64 [ 4143.220443] pciehp 0000:00:1c.3:pcie02: pciehp_resume ENTRY [ 4143.221042] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 4143.221047] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4143.221052] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 4143.221115] usb usb6: root hub lost power or was reset [ 4143.221134] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 4143.221140] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 4143.221201] usb usb7: root hub lost power or was reset [ 4143.221220] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 4143.221225] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 4143.221285] usb usb8: root hub lost power or was reset [ 4143.221879] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [ 4143.221886] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 4143.221891] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 4143.221957] pci 0000:00:1e.0: restoring config space at offset 0xf (was 0x40000, writing 0x400ff) [ 4143.221971] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [ 4143.221976] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0) [ 4143.221982] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x228000f0) [ 4143.221995] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100107) [ 4143.222012] pci 0000:00:1e.0: setting latency timer to 64 [ 4143.236153] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407) [ 4143.236197] ahci 0000:00:1f.2: setting latency timer to 64 [ 4143.252759] serial 00:0a: activated [ 4143.252770] pciehp 0000:00:1c.0:pcie02: pciehp_resume ENTRY [ 4143.252772] pciehp 0000:00:1c.1:pcie02: pciehp_resume ENTRY [ 4143.252775] pciehp 0000:00:1c.3:pcie02: pciehp_resume ENTRY [ 4143.252842] sd 0:0:0:0: [sda] Starting disk [ 4143.556128] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 4143.559185] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded [ 4143.559487] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded [ 4143.560344] ata2.00: ATAPI: HL-DT-STCD-RW/DVD DRIVE MU10N, 1.05, max UDMA/33 [ 4143.563457] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded [ 4143.563829] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded [ 4143.564729] ata2.00: configured for UDMA/33 [ 4143.582566] scsi 1:0:0:0: CD-ROM HL-DT-ST RW/DVD MU10N 1.05 PQ: 0 ANSI: 5 [ 4143.588025] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 4143.588028] Uniform CD-ROM driver Revision: 3.20 [ 4143.588125] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 4143.588194] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 4144.452120] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 4144.455978] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded [ 4144.455981] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out [ 4144.456326] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded [ 4144.456328] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out [ 4144.459750] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded [ 4144.459753] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out [ 4144.460113] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded [ 4144.460116] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out [ 4144.461517] ata1.00: configured for UDMA/100 [ 4144.479310] ata1.00: configured for UDMA/100 [ 4144.479312] ata1: EH complete [ 4144.479351] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB) [ 4144.479372] sd 0:0:0:0: [sda] Write Protect is off [ 4144.479374] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4144.479404] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4144.479435] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB) [ 4144.479455] sd 0:0:0:0: [sda] Write Protect is off [ 4144.479457] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4144.479478] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4145.068119] usb 1-6: reset high speed USB device using ehci_hcd and address 4 [ 4145.316114] usb 4-1: reset full speed USB device using uhci_hcd and address 2 [ 4145.465769] pci 0000:00:02.0: power state changed by ACPI to D0 [ 4145.465838] pci 0000:00:02.0: power state changed by ACPI to D0 [ 4145.465842] pci 0000:00:02.0: setting latency timer to 64 [ 4145.467494] PM: resume devices took 2.388 seconds [ 4145.467557] PM: Finishing wakeup. [ 4145.467559] Restarting tasks ... done. [ 4145.608118] usb 1-5: new high speed USB device using ehci_hcd and address 5 [ 4145.744615] usb 1-5: configuration #1 chosen from 1 choice [ 4145.744852] hub 1-5:1.0: USB hub found [ 4145.744991] hub 1-5:1.0: 4 ports detected [ 4146.026997] usb 1-5.4: new full speed USB device using ehci_hcd and address 6 [ 4146.158845] usb 1-5.4: configuration #1 chosen from 1 choice [ 4146.216208] e1000e 0000:00:19.0: irq 2299 for MSI/MSI-X [ 4146.216827] usbcore: registered new interface driver hiddev [ 4146.218546] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5.4/1-5.4:1.0/input/input9 [ 4146.234931] generic-usb 0003:046D:C525.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.7-5.4/input0 [ 4146.237220] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5.4/1-5.4:1.1/input/input10 [ 4146.244647] generic-usb 0003:046D:C525.0002: input,hiddev96,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.7-5.4/input1 [ 4146.244671] usbcore: registered new interface driver usbhid [ 4146.244674] usbhid: v2.6:USB HID core driver [ 4146.268118] e1000e 0000:00:19.0: irq 2299 for MSI/MSI-X [ 4146.268458] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 4146.300630] Registered led device: iwl-phy0:radio [ 4146.300648] Registered led device: iwl-phy0:assoc [ 4146.300665] Registered led device: iwl-phy0:RX [ 4146.300681] Registered led device: iwl-phy0:TX [ 4146.316690] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 4146.968027] usb 4-2: new full speed USB device using uhci_hcd and address 4 [ 4147.134500] usb 4-2: configuration #1 chosen from 1 choice [ 4147.865365] 0000:00:19.0: eth0: Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX [ 4147.865374] 0000:00:19.0: eth0: 10/100 speed: disabling TSO [ 4147.865868] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 4148.028287] wlan0: direct probe to AP 00:1a:70:da:44:1b try 1 [ 4148.228175] wlan0: direct probe to AP 00:1a:70:da:44:1b try 2 [ 4148.351967] CPU0 attaching NULL sched-domain. [ 4148.351971] CPU1 attaching NULL sched-domain. [ 4148.376068] CPU0 attaching sched-domain: [ 4148.376071] domain 0: span 0-1 level MC [ 4148.376073] groups: 0 1 [ 4148.376078] CPU1 attaching sched-domain: [ 4148.376080] domain 0: span 0-1 level MC [ 4148.376082] groups: 1 0 [ 4148.428020] wlan0: direct probe to AP 00:1a:70:da:44:1b try 3 [ 4148.628067] wlan0: direct probe to AP 00:1a:70:da:44:1b timed out [ 4150.937200] 0000:00:19.0: eth0: Link is Down [ 4151.356345] usb 1-5.3: new high speed USB device using ehci_hcd and address 8 [ 4151.455686] usb 1-5.3: configuration #1 chosen from 1 choice [ 4151.490312] Initializing USB Mass Storage driver... [ 4151.525720] scsi4 : SCSI emulation for USB Mass Storage devices [ 4151.526510] usbcore: registered new interface driver usb-storage [ 4151.526520] USB Mass Storage support registered. [ 4151.527012] usb-storage: device found at 8 [ 4151.527017] usb-storage: waiting for device to settle before scanning [ 4152.720904] 0000:00:19.0: eth0: Link is Up 100 Mbps Full Duplex, Flow Control: None [ 4152.720911] 0000:00:19.0: eth0: 10/100 speed: disabling TSO [ 4156.524593] usb-storage: device scan complete [ 4156.525362] scsi 4:0:0:0: Direct-Access WD 5000BMV External 1.75 PQ: 0 ANSI: 4 [ 4156.530336] sd 4:0:0:0: [sdb] 976773168 512-byte hardware sectors: (500 GB/465 GiB) [ 4156.546292] sd 4:0:0:0: [sdb] Write Protect is off [ 4156.546299] sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 4156.546305] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 4156.547155] sd 4:0:0:0: [sdb] 976773168 512-byte hardware sectors: (500 GB/465 GiB) [ 4156.547624] sd 4:0:0:0: [sdb] Write Protect is off [ 4156.547630] sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 4156.547634] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 4156.547642] sdb: unknown partition table [ 4156.580069] sd 4:0:0:0: [sdb] Attached SCSI disk [ 4156.580212] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 4158.036255] padlock: VIA PadLock not detected. [ 4158.051978] padlock: VIA PadLock Hash Engine not detected. [ 4158.484079] eth0: no IPv6 routers present [ 4159.440640] iwlagn: index 0 not used in uCode key table. [ 4163.717558] end_request: I/O error, dev sr0, sector 0 [ 4163.717569] Buffer I/O error on device sr0, logical block 0 [ 4163.717583] Buffer I/O error on device sr0, logical block 1 [ 4163.717589] Buffer I/O error on device sr0, logical block 2 [ 4163.717595] Buffer I/O error on device sr0, logical block 3 [ 4163.849818] end_request: I/O error, dev sr0, sector 0 [ 4163.849826] Buffer I/O error on device sr0, logical block 0 [ 4386.877113] CE: hpet increasing min_delta_ns to 15000 nsec [ 4394.269620] wlan0: authenticate with AP 00:90:4c:91:00:01 [ 4394.270342] wlan0: authenticate with AP 00:90:4c:91:00:01 [ 4394.273134] wlan0: authenticated [ 4394.273142] wlan0: associate with AP 00:90:4c:91:00:01 [ 4394.280030] wlan0: RX AssocResp from 00:90:4c:91:00:01 (capab=0x411 status=0 aid=6) [ 4394.280036] wlan0: associated [ 4394.288825] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 4404.696085] wlan0: no IPv6 routers present [ 4410.630109] wlan0 direct probe responded [ 4410.630114] wlan0: authenticate with AP 00:90:4c:91:00:01 [ 4410.632279] wlan0: authenticated [ 4410.632283] wlan0: associate with AP 00:90:4c:91:00:01 [ 4410.637936] wlan0: RX ReassocResp from 00:90:4c:91:00:01 (capab=0x411 status=0 aid=6) [ 4410.637939] wlan0: associated [ 4414.620195] wlan0: deauthenticated [ 4414.632382] iwlagn: index 0 not used in uCode key table. [ 4415.619398] wlan0: direct probe to AP 00:90:4c:91:00:01 try 1 [ 4415.622096] wlan0 direct probe responded [ 4415.622105] wlan0: authenticate with AP 00:90:4c:91:00:01 [ 4415.623939] wlan0: authenticated [ 4415.623945] wlan0: associate with AP 00:90:4c:91:00:01 [ 4415.626973] wlan0: RX ReassocResp from 00:90:4c:91:00:01 (capab=0x411 status=0 aid=6) [ 4415.626980] wlan0: associated [13086.267093] k7[29867]: segfault at 0 ip b7e50613 sp bfbf627c error 4 in libc-2.9.so[b7dd9000+15c000] [13248.919402] k7[30092]: segfault at 0 ip b7de6613 sp bf98e00c error 4 in libc-2.9.so[b7d6f000+15c000]