[ 0.000000] Linux version 2.6.24-4-generic (buildd@vernadsky) (gcc version 4.2.3 20080104 (prerelease) (Ubuntu 4.2.2-5ubuntu2)) #1 SMP Mon Jan 14 17:30:39 UTC 2008 (Ubuntu 2.6.24-4.7-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) [ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) [ 0.000000] 127MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] Entering add_active_range(0, 0, 262128) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 262128 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 262128 [ 0.000000] On node 0 totalpages: 262128 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 255 pages used for memmap [ 0.000000] HighMem zone: 32497 pages, LIFO batch:7 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI 2.2 present. [ 0.000000] ACPI: RSDP signature @ 0xC00F7550 checksum 0 [ 0.000000] ACPI: RSDP 000F7550, 0014 (r0 Nvidia) [ 0.000000] ACPI: RSDT 3FFF3000, 002C (r1 Nvidia AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: FACP 3FFF3040, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: DSDT 3FFF30C0, 48F4 (r1 NVIDIA AWRDACPI 1000 MSFT 100000E) [ 0.000000] ACPI: FACS 3FFF0000, 0040 [ 0.000000] ACPI: APIC 3FFF79C0, 006E (r1 Nvidia AWRDACPI 42302E31 AWRD 0) [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:10 APIC version 16 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000) [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260081 [ 0.000000] Kernel command line: root=UUID=58e0741e-dbb8-48cb-85e2-8290a07fbfd0 ro quiet splash [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 2205.062 MHz processor. [ 16.275940] Console: colour VGA+ 80x25 [ 16.275943] console [tty0] enabled [ 16.276411] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 16.276826] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 16.301817] Memory: 1027424k/1048512k available (2131k kernel code, 20372k reserved, 991k data, 364k init, 131008k highmem) [ 16.301825] virtual kernel memory layout: [ 16.301826] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB) [ 16.301827] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 16.301828] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 16.301829] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 16.301830] .init : 0xc0413000 - 0xc046e000 ( 364 kB) [ 16.301831] .data : 0xc0314ead - 0xc040cd44 ( 991 kB) [ 16.301833] .text : 0xc0100000 - 0xc0314ead (2131 kB) [ 16.301836] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 16.301878] SLUB: Genslabs=11, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 [ 16.381834] Calibrating delay using timer specific routine.. 4413.51 BogoMIPS (lpj=8827030) [ 16.381865] Security Framework initialized [ 16.381872] SELinux: Disabled at boot. [ 16.381889] AppArmor: AppArmor initialized [ 16.381893] Failure registering capabilities with primary security module. [ 16.381902] Mount-cache hash table entries: 512 [ 16.382032] CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000 00000000 [ 16.382040] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 16.382043] CPU: L2 Cache: 512K (64 bytes/line) [ 16.382046] CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000 00000000 [ 16.382055] Compat vDSO mapped to ffffe000. [ 16.382066] Checking 'hlt' instruction... OK. [ 16.398022] SMP alternatives: switching to UP code [ 16.398992] Freeing SMP alternatives: 11k freed [ 16.399101] Early unpacking initramfs... done [ 16.687069] ACPI: Core revision 20070126 [ 16.687146] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 16.696014] CPU0: AMD Athlon(tm) stepping 00 [ 16.696036] Total of 1 processors activated (4413.51 BogoMIPS). [ 16.696228] ENABLING IO-APIC IRQs [ 16.696409] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 16.841519] Brought up 1 CPUs [ 16.841544] CPU0 attaching sched-domain: [ 16.841547] domain 0: span 01 [ 16.841548] groups: 01 [ 16.841722] net_namespace: 64 bytes [ 16.841727] Booting paravirtualized kernel on bare hardware [ 16.842149] Time: 20:38:34 Date: 01/23/08 [ 16.842203] NET: Registered protocol family 16 [ 16.842392] EISA bus registered [ 16.842411] ACPI: bus type pci registered [ 16.876620] PCI: PCI BIOS revision 2.10 entry at 0xfbc60, last bus=2 [ 16.876623] PCI: Using configuration type 1 [ 16.876624] Setting up standard PCI resources [ 16.881562] ACPI: EC: Look up EC in DSDT [ 16.886081] ACPI: Interpreter enabled [ 16.886083] ACPI: (supports S0 S1 S4 S5) [ 16.886095] ACPI: Using IOAPIC for interrupt routing [ 16.893318] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 16.894179] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 16.894336] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 16.894550] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT] [ 16.936103] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 16.936248] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 16.936393] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 16.936536] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 16.936678] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 16.936822] ACPI: PCI Interrupt Link [LUBA] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 16.936965] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 16.937111] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 16.937254] ACPI: PCI Interrupt Link [LAPU] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 16.937399] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 16.937546] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 16.937690] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 16.937836] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 16.937980] ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 16.938123] ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 16.938265] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 16.938392] ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled. [ 16.938503] ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled. [ 16.938613] ACPI: PCI Interrupt Link [APC3] (IRQs *18) [ 16.938723] ACPI: PCI Interrupt Link [APC4] (IRQs *19) [ 16.938831] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. [ 16.938992] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0 [ 16.939151] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0 [ 16.939308] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0 [ 16.939466] ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0 [ 16.939623] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0 [ 16.939780] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled. [ 16.939892] ACPI: PCI Interrupt Link [APCS] (IRQs *23) [ 16.940048] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0 [ 16.940206] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled. [ 16.940369] ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled. [ 16.940528] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled. [ 16.940655] Linux Plug and Play Support v0.97 (c) Adam Belay [ 16.940687] pnp: PnP ACPI init [ 16.940693] ACPI: bus type pnp registered [ 16.944543] pnp: PnP ACPI: found 14 devices [ 16.944546] ACPI: ACPI bus type pnp unregistered [ 16.944549] PnPBIOS: Disabled by ACPI PNP [ 16.944748] PCI: Using ACPI for IRQ routing [ 16.944752] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 16.973382] NET: Registered protocol family 8 [ 16.973384] NET: Registered protocol family 20 [ 16.973452] AppArmor: AppArmor Filesystem Enabled [ 16.977371] Time: tsc clocksource has been installed. [ 16.985398] system 00:00: ioport range 0x4000-0x407f has been reserved [ 16.985402] system 00:00: ioport range 0x4080-0x40ff has been reserved [ 16.985404] system 00:00: ioport range 0x4400-0x447f has been reserved [ 16.985407] system 00:00: ioport range 0x4480-0x44ff has been reserved [ 16.985409] system 00:00: ioport range 0x4200-0x427f has been reserved [ 16.985411] system 00:00: ioport range 0x4280-0x42ff has been reserved [ 16.985418] system 00:01: ioport range 0x5000-0x503f has been reserved [ 16.985420] system 00:01: ioport range 0x5100-0x513f has been reserved [ 16.985425] system 00:02: iomem range 0xf0000-0xf3fff could not be reserved [ 16.985428] system 00:02: iomem range 0xf4000-0xf7fff could not be reserved [ 16.985430] system 00:02: iomem range 0xf8000-0xfbfff could not be reserved [ 16.985433] system 00:02: iomem range 0xfc000-0xfffff could not be reserved [ 16.985435] system 00:02: iomem range 0x3fff0000-0x3fffffff could not be reserved [ 16.985438] system 00:02: iomem range 0xffff0000-0xffffffff could not be reserved [ 16.985441] system 00:02: iomem range 0x0-0x9ffff could not be reserved [ 16.985443] system 00:02: iomem range 0x100000-0x3ffeffff could not be reserved [ 16.985446] system 00:02: iomem range 0xfec00000-0xfec00fff could not be reserved [ 16.985448] system 00:02: iomem range 0xfee00000-0xfee00fff could not be reserved [ 16.985453] system 00:04: ioport range 0xb78-0xb7b has been reserved [ 16.985456] system 00:04: ioport range 0xf78-0xf7b has been reserved [ 16.985458] system 00:04: ioport range 0xa78-0xa7b has been reserved [ 16.985460] system 00:04: ioport range 0xe78-0xe7b has been reserved [ 16.985463] system 00:04: ioport range 0xbbc-0xbbf has been reserved [ 16.985465] system 00:04: ioport range 0xfbc-0xfbf has been reserved [ 16.985467] system 00:04: ioport range 0x4d0-0x4d1 has been reserved [ 17.015864] PCI: Bridge: 0000:00:08.0 [ 17.015867] IO window: a000-bfff [ 17.015872] MEM window: e2000000-e3ffffff [ 17.015875] PREFETCH window: 50000000-500fffff [ 17.015880] PCI: Bridge: 0000:00:1e.0 [ 17.015882] IO window: c000-cfff [ 17.015885] MEM window: e0000000-e1ffffff [ 17.015888] PREFETCH window: c0000000-dfffffff [ 17.015898] PCI: Setting latency timer of device 0000:00:08.0 to 64 [ 17.015903] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 17.015914] NET: Registered protocol family 2 [ 17.053395] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 17.053713] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 17.054927] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 17.055490] TCP: Hash tables configured (established 131072 bind 65536) [ 17.055492] TCP reno registered [ 17.065438] checking if image is initramfs... it is [ 17.516952] Switched to high resolution mode on CPU 0 [ 17.611887] Freeing initrd memory: 7301k freed [ 17.612524] audit: initializing netlink socket (disabled) [ 17.612538] audit(1201120715.200:1): initialized [ 17.612682] highmem bounce pool size: 64 pages [ 17.614415] VFS: Disk quotas dquot_6.5.1 [ 17.614482] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 17.614598] io scheduler noop registered [ 17.614600] io scheduler anticipatory registered [ 17.614602] io scheduler deadline registered [ 17.614612] io scheduler cfq registered (default) [ 17.668772] Boot video device is 0000:02:00.0 [ 17.669026] isapnp: Scanning for PnP cards... [ 18.023164] isapnp: No Plug & Play device found [ 18.049970] Real Time Clock Driver v1.12ac [ 18.050067] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 18.050192] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 18.050774] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 18.051495] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 18.051558] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 18.051648] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 18.054016] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 18.054020] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 18.064513] mice: PS/2 mouse device common for all mice [ 18.064619] EISA: Probing bus 0 at eisa.0 [ 18.064640] Cannot allocate resource for EISA slot 4 [ 18.064642] Cannot allocate resource for EISA slot 5 [ 18.064657] EISA: Detected 0 cards. [ 18.064660] cpuidle: using governor ladder [ 18.064662] cpuidle: using governor menu [ 18.064788] NET: Registered protocol family 1 [ 18.064812] Using IPI No-Shortcut mode [ 18.064841] registered taskstats version 1 [ 18.064939] Magic number: 8:400:650 [ 18.064997] hash matches device ptydf [ 18.065418] Freeing unused kernel memory: 364k freed [ 18.155717] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 19.266066] fuse init (API version 7.9) [ 19.281133] ACPI: Thermal Zone [THRM] (20 C) [ 20.095725] usbcore: registered new interface driver usbfs [ 20.095746] usbcore: registered new interface driver hub [ 20.106708] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. [ 20.107013] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22 [ 20.107020] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCH] -> GSI 22 (level, high) -> IRQ 16 [ 20.107027] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 20.114646] usbcore: registered new device driver usb [ 20.125688] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 20.155812] SCSI subsystem initialized [ 20.202532] libata version 3.00 loaded. [ 20.331710] Floppy drive(s): fd0 is 1.44M [ 20.350139] FDC 0 is a post-1991 82077 [ 20.626551] forcedeth 0000:00:04.0: ifname eth0, PHY OUI 0x20 @ 1, addr 00:50:8d:f9:98:88 [ 20.626556] forcedeth 0000:00:04.0: timirq lnktim desc-v1 [ 20.626968] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21 [ 20.626975] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 21 (level, high) -> IRQ 17 [ 20.626986] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 20.626990] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 20.627260] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 [ 20.627277] ohci_hcd 0000:00:02.0: irq 17, io mem 0xe4080000 [ 20.684226] usb usb1: configuration #1 chosen from 1 choice [ 20.684254] hub 1-0:1.0: USB hub found [ 20.684263] hub 1-0:1.0: 3 ports detected [ 20.786377] ACPI: PCI Interrupt Link [APCG] enabled at IRQ 20 [ 20.786385] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCG] -> GSI 20 (level, high) -> IRQ 18 [ 20.786398] PCI: Setting latency timer of device 0000:00:02.1 to 64 [ 20.786402] ohci_hcd 0000:00:02.1: OHCI Host Controller [ 20.786425] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2 [ 20.786442] ohci_hcd 0000:00:02.1: irq 18, io mem 0xe4083000 [ 20.844018] usb usb2: configuration #1 chosen from 1 choice [ 20.844046] hub 2-0:1.0: USB hub found [ 20.844054] hub 2-0:1.0: 3 ports detected [ 20.946609] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22 [ 20.946614] ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [APCL] -> GSI 22 (level, high) -> IRQ 16 [ 20.946625] PCI: Setting latency timer of device 0000:00:02.2 to 64 [ 20.946628] ehci_hcd 0000:00:02.2: EHCI Host Controller [ 20.946652] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3 [ 20.946682] ehci_hcd 0000:00:02.2: debug port 1 [ 20.946687] PCI: cache line size of 64 is not supported by device 0000:00:02.2 [ 20.946698] ehci_hcd 0000:00:02.2: irq 16, io mem 0xe4084000 [ 21.089720] usb 1-1: new full speed USB device using ohci_hcd and address 2 [ 21.101704] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 21.101818] usb usb3: configuration #1 chosen from 1 choice [ 21.101841] hub 3-0:1.0: USB hub found [ 21.101847] hub 3-0:1.0: 6 ports detected [ 21.205933] pata_amd 0000:00:09.0: version 0.3.10 [ 21.206003] PCI: Setting latency timer of device 0000:00:09.0 to 64 [ 21.206823] scsi0 : pata_amd [ 21.207311] scsi1 : pata_amd [ 21.207953] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 21.207957] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 21.369961] ata1.00: ATA-7: Maxtor 6Y080P0, YAR41BW0, max UDMA/133 [ 21.369965] ata1.00: 160086528 sectors, multi 16: LBA [ 21.385852] ata1.00: configured for UDMA/133 [ 21.869378] ata2.00: ATAPI: _NEC DVD_RW ND-3550A, 1.05, max UDMA/33 [ 21.869395] ata2.01: ATAPI: HL-DT-ST GCE-8520B, 1.00, max UDMA/33 [ 22.041157] ata2.00: configured for UDMA/33 [ 22.196733] usb 1-1: new full speed USB device using ohci_hcd and address 3 [ 22.212963] ata2.01: configured for UDMA/33 [ 22.213068] scsi 0:0:0:0: Direct-Access ATA Maxtor 6Y080P0 YAR4 PQ: 0 ANSI: 5 [ 22.214480] scsi 1:0:0:0: CD-ROM _NEC DVD_RW ND-3550A 1.05 PQ: 0 ANSI: 5 [ 22.214826] scsi 1:0:1:0: CD-ROM HL-DT-ST CD-RW GCE-8520B 1.00 PQ: 0 ANSI: 5 [ 22.216278] sata_sil 0000:01:0b.0: version 2.3 [ 22.216506] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 [ 22.216513] ACPI: PCI Interrupt 0000:01:0b.0[A] -> Link [APC3] -> GSI 18 (level, high) -> IRQ 19 [ 22.216530] PCI: Setting latency timer of device 0000:01:0b.0 to 64 [ 22.217923] scsi2 : sata_sil [ 22.218134] scsi3 : sata_sil [ 22.218162] ata3: SATA max UDMA/100 mmio m512@0xe3000000 tf 0xe3000080 irq 19 [ 22.218166] ata4: SATA max UDMA/100 mmio m512@0xe3000000 tf 0xe30000c0 irq 19 [ 22.400577] usb 1-1: configuration #1 chosen from 1 choice [ 22.403534] hub 1-1:1.0: USB hub found [ 22.406496] hub 1-1:1.0: 4 ports detected [ 22.684326] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 22.693758] ata3.00: ATA-7: Maxtor 6G160E0, KA101V00, max UDMA/133 [ 22.693761] ata3.00: 312581808 sectors, multi 0: LBA48 NCQ (depth 0/32) [ 22.709755] ata3.00: configured for UDMA/100 [ 22.828173] usb 2-3: new full speed USB device using ohci_hcd and address 2 [ 23.020009] ata4: SATA link down (SStatus 0 SControl 310) [ 23.020122] scsi 2:0:0:0: Direct-Access ATA Maxtor 6G160E0 KA10 PQ: 0 ANSI: 5 [ 23.028004] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 23.028010] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 23.035759] Driver 'sd' needs updating - please use bus_type methods [ 23.035844] sd 0:0:0:0: [sda] 160086528 512-byte hardware sectors (81964 MB) [ 23.035865] sd 0:0:0:0: [sda] Write Protect is off [ 23.035868] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 23.035884] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 23.035927] sd 0:0:0:0: [sda] 160086528 512-byte hardware sectors (81964 MB) [ 23.035936] sd 0:0:0:0: [sda] Write Protect is off [ 23.035938] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 23.035951] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 23.035954] sda:<6>usb 2-3: configuration #1 chosen from 1 choice [ 23.050601] Driver 'sr' needs updating - please use bus_type methods [ 23.053572] sda1 sda2 < sda5 > sda3 [ 23.094692] sd 0:0:0:0: [sda] Attached SCSI disk [ 23.094912] sd 2:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB) [ 23.094924] sd 2:0:0:0: [sdb] Write Protect is off [ 23.094927] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 23.094943] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 23.094988] sd 2:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB) [ 23.094998] sd 2:0:0:0: [sdb] Write Protect is off [ 23.095000] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 23.095015] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 23.095018] sdb:sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray [ 23.099275] Uniform CD-ROM driver Revision: 3.20 [ 23.099323] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 23.102737] sr1: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray [ 23.102771] sr 1:0:1:0: Attached scsi CD-ROM sr1 [ 23.107850] sdb1 sdb2 [ 23.142043] sd 2:0:0:0: [sdb] Attached SCSI disk [ 23.157075] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 23.157095] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 23.157112] sr 1:0:1:0: Attached scsi generic sg2 type 5 [ 23.157129] sd 2:0:0:0: Attached scsi generic sg3 type 0 [ 23.404000] Attempting manual resume [ 23.404004] swsusp: Resume From Partition 8:5 [ 23.404006] PM: Checking swsusp image. [ 23.404341] PM: Resume from disk failed. [ 23.430410] kjournald starting. Commit interval 5 seconds [ 23.430425] EXT3-fs: mounted filesystem with ordered data mode. [ 29.674248] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 29.889926] Linux agpgart interface v0.102 [ 29.929933] agpgart: Detected NVIDIA nForce2 chipset [ 29.943155] agpgart: AGP aperture is 256M @ 0xb0000000 [ 29.986358] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 30.049856] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 30.153565] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x5000 [ 30.153582] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x5100 [ 30.263221] nvsound: module license 'NVIDIA' taints kernel. [ 30.297595] Nvsound: Nvidia Audio Init Module, 17:42:23 Jan 21 2008 version 1.0-7 [ 30.297985] ACPI: PCI Interrupt Link [APCI] enabled at IRQ 21 [ 30.297989] ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [APCI] -> GSI 21 (level, high) -> IRQ 17 [ 30.297995] PCI: Setting latency timer of device 0000:00:05.0 to 64 [ 30.298001] Nvsound: NVIDIA nForce2 Controller Mem 0xe4000000 and IRQ 11 [ 30.298234] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 20 [ 30.298236] ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [APCJ] -> GSI 20 (level, high) -> IRQ 18 [ 30.298241] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 30.298248] Nvsound: NVIDIA nForce2 Audio aci 0xd400 and ac97 0xd000, IRQ 12 [ 30.877640] parport_pc 00:0b: reported by Plug and Play ACPI [ 30.877755] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] [ 30.901109] input: Power Button (FF) as /devices/virtual/input/input3 [ 30.916997] ACPI: Power Button (FF) [PWRF] [ 30.917085] input: Power Button (CM) as /devices/virtual/input/input4 [ 30.936966] ACPI: Power Button (CM) [PWRB] [ 31.139373] parport0: Printer, Canon BJC-4300 [ 31.585137] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5 [ 33.542328] [fglrx] Maximum main memory to use for locked dma buffers: 929 MBytes. [ 33.542359] [fglrx] ASYNCIO init succeed! [ 33.542481] [fglrx] PAT is enabled successfully! [ 33.561549] [fglrx] module loaded - fglrx 8.45.4 [Jan 16 2008] on minor 0 [ 33.856684] Nvsound: DEV MIXER 0 DEV AUDIO 3 [ 33.858129] Linux video capture interface: v2.00 [ 33.919708] NET: Registered protocol family 10 [ 33.919890] lo: Disabled Privacy Extensions [ 33.944782] /home/icaro/Installazioni/webcam-driver/ov51x-jpeg-core.c: USB OV519 video device found [ 34.396069] /home/icaro/Installazioni/webcam-driver/ov51x-jpeg-core.c: Sensor is an OV7670 [ 36.271324] /home/icaro/Installazioni/webcam-driver/ov51x-jpeg-core.c: Device at usb-0000:00:02.1-3 registered to minor 0 [ 36.271348] usbcore: registered new interface driver ov51x [ 36.271352] /home/icaro/Installazioni/webcam-driver/ov51x-jpeg-core.c: 1.5.4 : ov51x USB Camera Driver [ 37.150024] lp0: using parport0 (interrupt-driven). [ 37.220278] Adding 3028212k swap on /dev/sda5. Priority:-1 extents:1 across:3028212k [ 37.250802] Adding 2080408k swap on /dev/sdb1. Priority:-2 extents:1 across:2080408k [ 37.566950] EXT3 FS on sda1, internal journal [ 38.223368] kjournald starting. Commit interval 5 seconds [ 38.230907] EXT3 FS on sdb2, internal journal [ 38.230912] EXT3-fs: mounted filesystem with ordered data mode. [ 38.266839] kjournald starting. Commit interval 5 seconds [ 38.267223] EXT3 FS on sda3, internal journal [ 38.267226] EXT3-fs: mounted filesystem with ordered data mode. [ 39.274757] No dock devices found. [ 39.285585] toshiba_acpi: Unknown parameter `hotkeys_over_acpi' [ 40.738827] ppdev: user-space parallel port driver [ 41.056415] audit(1201120739.000:2): operation="inode_permission" request_mask="a::" denied_mask="a::" name="/dev/tty" pid=4955 profile="/usr/sbin/cupsd" namespace="default" [ 43.857012] Bluetooth: Core ver 2.11 [ 43.857082] NET: Registered protocol family 31 [ 43.857084] Bluetooth: HCI device and connection manager initialized [ 43.857088] Bluetooth: HCI socket layer initialized [ 43.878761] Bluetooth: L2CAP ver 2.9 [ 43.878766] Bluetooth: L2CAP socket layer initialized [ 43.977406] Bluetooth: RFCOMM socket layer initialized [ 43.977425] Bluetooth: RFCOMM TTY layer initialized [ 43.977427] Bluetooth: RFCOMM ver 1.8 [ 44.093266] eth0: no IPv6 routers present [ 46.547133] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 [ 46.547145] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [APC4] -> GSI 19 (level, high) -> IRQ 20 [ 49.830566] [fglrx] Internal AGP support requested, but kernel AGP support active. [ 49.830574] [fglrx] Have to use kernel AGP support to avoid conflicts. [ 49.830578] [fglrx] AGP detected, AgpState = 0x1f00421a (hardware caps of chipset) [ 49.831028] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0. [ 49.831285] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode [ 49.831484] agpgart: Putting AGP V3 device at 0000:02:00.0 into 8x mode [ 49.831650] [fglrx] AGP enabled, AgpCommand = 0x1f004312 (selected caps) [ 49.837147] [fglrx] GART Table is not in FRAME_BUFFER range [ 49.837160] [fglrx] Reserve Block - 0 offset = 0X0 length = 0X40000 [ 49.965084] [fglrx] interrupt source 20008000 successfully enabled [ 49.965091] [fglrx] enable ID = 0x00000004 [ 49.965307] [fglrx] Receive enable interrupt message with irqEnableMask: 20008000 [ 49.965581] [fglrx] interrupt source 10000000 successfully enabled [ 49.965584] [fglrx] enable ID = 0x00000005 [ 49.965807] [fglrx] Receive enable interrupt message with irqEnableMask: 10000000 [ 4502.787016] [fglrx:firegl_free_mutex] *ERROR* mutex id 0x00000006 not found in mutex list [ 4502.836402] [fglrx:firegl_free_mutex] *ERROR* mutex id 0x00000002 not found in mutex list [ 4569.718681] [fglrx:firegl_free_mutex] *ERROR* mutex id 0x00000002 not found in mutex list