X.Org X Server 1.10.1
Release Date: 2011-04-15
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-29-server i686 Ubuntu
Current Operating System: Linux rossino 2.6.38-8-generic #42-Ubuntu SMP Mon Apr 11 03:31:50 UTC 2011 i686
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-8-generic root=UUID=d1ac4556-749d-403f-a906-b1124ba76dc2 ro quiet splash vt.handoff=7
Build Date: 19 April 2011  03:33:17PM
xorg-server 2:1.10.1-1ubuntu1 (For technical support please see http://www.ubuntu.com/support) 
Current version of pixman: 0.20.2
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed May  4 23:07:28 2011
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(==) No Layout section.  Using the first Screen section.
(==) No screen section available. Using defaults.
(**) |-->Screen "Default Screen Section" (0)
(**) |   |-->Monitor "<default monitor>"
(==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
	Entry deleted from font path.
(==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/75dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi,
	/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
	built-ins
(==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
(II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
(--) PCI:*(0:0:2:0) 8086:a001:8086:574d rev 2, Mem @ 0xf0200000/524288, 0xe0000000/268435456, 0xf0100000/1048576, I/O @ 0x000020c0/8
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.10.1, module version = 1.0.0
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.10.1, module version = 1.0.0
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
	compiled for 1.10.1, module version = 1.0.0
(==) AIGLX enabled
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
	compiled for 1.10.1, module version = 1.13.0
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 1.10.1, module version = 1.0.0
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
	compiled for 1.10.1, module version = 1.2.0
(==) Matched intel as autoconfigured driver 0
(==) Matched vesa as autoconfigured driver 1
(==) Matched fbdev as autoconfigured driver 2
(==) Assigned the driver to the xf86ConfigLayout
(II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
	compiled for 1.10.1, module version = 2.14.0
(II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
	compiled for 1.10.0, module version = 2.3.0
(II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
(II) Module fbdev: vendor="X.Org Foundation"
	compiled for 1.10.0, module version = 0.4.2
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
	i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
	E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
	965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
	4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
	Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge,
	Sandybridge, Sandybridge
(II) VESA: driver for VESA chipsets: vesa
(II) FBDEV: driver for framebuffer: fbdev
(--) using VT number 8

(II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
(WW) Falling back to old probe method for vesa
(WW) Falling back to old probe method for fbdev
(II) Loading /usr/lib/xorg/modules/libfbdevhw.so
(II) Module fbdevhw: vendor="X.Org Foundation"
	compiled for 1.10.1, module version = 0.0.2
(II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) Pineview G
(--) intel(0): Chipset: "Pineview G"
(**) intel(0): Relaxed fencing enabled
(**) intel(0): Tiling enabled
(**) intel(0): SwapBuffers wait enabled
(==) intel(0): video overlay key set to 0x101fe
(II) intel(0): Output LVDS1 has no monitor section
(II) intel(0): Output VGA1 has no monitor section
(II) intel(0): EDID for output LVDS1
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
(II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
(II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
(II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
(II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
(II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
(II) intel(0): Printing probed modes for output LVDS1
(II) intel(0): Modeline "1280x800"x58.1   68.90  1280 1292 1340 1440  800 804 807 823 -hsync -vsync (47.8 kHz)
(II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): EDID for output VGA1
(II) intel(0): Manufacturer: ACR  Model: ad63  Serial#: 0
(II) intel(0): Year: 2005  Week: 52
(II) intel(0): EDID Version: 1.3
(II) intel(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
(II) intel(0): Sync:  Separate
(II) intel(0): Max Image Size [cm]: horiz.: 38  vert.: 30
(II) intel(0): Gamma: 2.20
(II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) intel(0): First detailed timing not preferred mode in violation of standard!
(II) intel(0): redX: 0.647 redY: 0.327   greenX: 0.292 greenY: 0.614
(II) intel(0): blueX: 0.142 blueY: 0.079   whiteX: 0.310 whiteY: 0.330
(II) intel(0): Supported established timings:
(II) intel(0): 720x400@70Hz
(II) intel(0): 640x480@60Hz
(II) intel(0): 640x480@67Hz
(II) intel(0): 640x480@72Hz
(II) intel(0): 640x480@75Hz
(II) intel(0): 800x600@56Hz
(II) intel(0): 800x600@60Hz
(II) intel(0): 800x600@72Hz
(II) intel(0): 800x600@75Hz
(II) intel(0): 832x624@75Hz
(II) intel(0): 1024x768@60Hz
(II) intel(0): 1024x768@70Hz
(II) intel(0): 1024x768@75Hz
(II) intel(0): 1280x1024@75Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported detailed timing:
(II) intel(0): clock: 108.0 MHz   Image Size:  376 x 301 mm
(II) intel(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) intel(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) intel(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 145 MHz
(II) intel(0): Serial No: 55101177PY00
(II) intel(0): Monitor name: AL1917
(II) intel(0): EDID (in hex):
(II) intel(0): 	00ffffffffffff00047263ad00000000
(II) intel(0): 	340f010308261e78e8fd56a5534a9d24
(II) intel(0): 	144f54bfef0001010101010101010101
(II) intel(0): 	010101010101302a009851002a403070
(II) intel(0): 	1300782d1100001e000000fd00384b1e
(II) intel(0): 	530e000a202020202020000000ff0035
(II) intel(0): 	35313031313737505930300a000000fc
(II) intel(0): 	00414c313931370a20202020202000f3
(II) intel(0): Printing probed modes for output VGA1
(II) intel(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1024x768"x75.1   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz)
(II) intel(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 491 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Output LVDS1 connected
(II) intel(0): Output VGA1 connected
(II) intel(0): Using fuzzy aspect match for initial modes
(II) intel(0): Output LVDS1 using initial mode 1024x768
(II) intel(0): Output VGA1 using initial mode 1024x768
(II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(II) intel(0): Kernel page flipping support detected, enabling
(==) intel(0): DPI set to (96, 96)
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.10.1, module version = 1.0.0
(II) Unloading vesa
(II) Unloading fbdev
(II) Unloading fbdevhw
(==) Depth 24 pixmap format is 32 bpp
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): [DRI2] Setup complete
(II) intel(0): [DRI2]   DRI driver: i915
(II) intel(0): Allocated new frame buffer 1024x768 stride 4096, tiled
(II) UXA(0): Driver registered support for the following operations:
(II)         solid
(II)         copy
(II)         composite (RENDER acceleration)
(II)         put_image
(II)         get_image
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(==) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up textured video
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: DRI2 Enabled
(==) intel(0): hotplug detection: "enabled"
(--) RandR disabled
(II) AIGLX: Trying DRI driver /usr/lib/dri/i915_dri.so
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_INTEL_swap_event
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
(II) AIGLX: Loaded and initialized i915
(II) GLX: Initialized DRI2 GL provider for screen 0
(II) intel(0): Setting screen physical size to 270 x 203
(II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
(II) config/udev: Adding input device Power Button (/dev/input/event1)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
	compiled for 1.10.0.902, module version = 2.6.0
(II) Using input driver 'evdev' for 'Power Button'
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event1"
(--) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(II) XKB: reuse xkmfile /var/lib/xkb/server-3781FECB9CB8D26EE03343DB2C93394EA704B98F.xkm
(II) config/udev: Adding input device Sleep Button (/dev/input/event0)
(**) Sleep Button: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'Sleep Button'
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(**) Sleep Button: always reports core events
(**) Sleep Button: Device: "/dev/input/event0"
(--) Sleep Button: Found keys
(II) Sleep Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
(II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event4)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event2)
(**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'Logitech USB Receiver'
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(**) Logitech USB Receiver: always reports core events
(**) Logitech USB Receiver: Device: "/dev/input/event2"
(--) Logitech USB Receiver: Found keys
(II) Logitech USB Receiver: Configuring as keyboard
(II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD)
(II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event3)
(**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
(**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'Logitech USB Receiver'
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(**) Logitech USB Receiver: always reports core events
(**) Logitech USB Receiver: Device: "/dev/input/event3"
(--) Logitech USB Receiver: Found 20 mouse buttons
(--) Logitech USB Receiver: Found scroll wheel(s)
(--) Logitech USB Receiver: Found relative axes
(--) Logitech USB Receiver: Found x and y relative axes
(--) Logitech USB Receiver: Found keys
(II) Logitech USB Receiver: Configuring as mouse
(II) Logitech USB Receiver: Configuring as keyboard
(II) Logitech USB Receiver: Adding scrollwheel support
(**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
(**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD)
(II) Logitech USB Receiver: initialized for relative axes.
(**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
(**) Logitech USB Receiver: (accel) acceleration profile 0
(**) Logitech USB Receiver: (accel) acceleration factor: 2.000
(**) Logitech USB Receiver: (accel) acceleration threshold: 4
(II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
(II) No input driver/identifier specified (ignoring)
(II) intel(0): Allocated new frame buffer 1280x1024 stride 8192, tiled
(II) Power Button: Close
(II) Unloading evdev
(II) Sleep Button: Close
(II) Unloading evdev
(II) Logitech USB Receiver: Close
(II) Unloading evdev
(II) Logitech USB Receiver: Close
(II) Unloading evdev
 ddxSigGiveUp: Closing log