[ 0.000000] microcode: microcode updated early to revision 0x25, date = 2017-01-27 [ 0.000000] random: get_random_bytes called from start_kernel+0x42/0x4e1 with crng_init=0 [ 0.000000] Linux version 4.13.0-19-generic (buildd@lcy01-amd64-021) (gcc version 7.2.0 (Ubuntu 7.2.0-8ubuntu3)) #22-Ubuntu SMP Mon Dec 4 11:58:07 UTC 2017 (Ubuntu 4.13.0-19.22-generic 4.13.13) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.13.0-19-generic.efi.signed root=UUID=02bd5120-a925-442c-a0dd-1cce59920632 ro quiet splash psmouse.synaptics_intertouch=0 vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009bfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009c000-0x000000000009cfff] reserved [ 0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009dfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ba7b9fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000ba7ba000-0x00000000ba9b9fff] type 20 [ 0.000000] BIOS-e820: [mem 0x00000000ba9ba000-0x00000000bcbfefff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bcbff000-0x00000000bcd7efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bcd7f000-0x00000000bcdfefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bcdff000-0x00000000bcdfffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000f80f8000-0x00000000f80f8fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000053dffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.31 by Lenovo [ 0.000000] efi: ACPI=0xbcdfe000 ACPI 2.0=0xbcdfe014 SMBIOS=0xbcbfe000 ESRT=0xbab46000 [ 0.000000] random: fast init done [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: LENOVO 20BXCTO1WW/20BXCTO1WW, BIOS JBET54WW (1.19 ) 11/06/2015 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x53e000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 00D0000000 mask 7FF0000000 uncachable [ 0.000000] 1 base 00BE000000 mask 7FFE000000 uncachable [ 0.000000] 2 base 00BD000000 mask 7FFF000000 uncachable [ 0.000000] 3 base 00BCE00000 mask 7FFFE00000 uncachable [ 0.000000] 4 base 00E0000000 mask 7FE0000000 uncachable [ 0.000000] 5 base 00C0000000 mask 7FF0000000 uncachable [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] e820: last_pfn = 0xbce00 max_arch_pfn = 0x400000000 [ 0.000000] esrt: Reserving ESRT space from 0x00000000bab46000 to 0x00000000bab46060. [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff89e4c0096000] 96000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x49ef23000, 0x49ef23fff] PGTABLE [ 0.000000] BRK [0x49ef24000, 0x49ef24fff] PGTABLE [ 0.000000] BRK [0x49ef25000, 0x49ef25fff] PGTABLE [ 0.000000] BRK [0x49ef26000, 0x49ef26fff] PGTABLE [ 0.000000] BRK [0x49ef27000, 0x49ef27fff] PGTABLE [ 0.000000] BRK [0x49ef28000, 0x49ef28fff] PGTABLE [ 0.000000] BRK [0x49ef29000, 0x49ef29fff] PGTABLE [ 0.000000] BRK [0x49ef2a000, 0x49ef2afff] PGTABLE [ 0.000000] Secure boot could not be determined [ 0.000000] RAMDISK: [mem 0x31ef9000-0x34f73fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000BCDFE014 000024 (v02 LENOVO) [ 0.000000] ACPI: XSDT 0x00000000BCDFE1C0 0000FC (v01 LENOVO TP-JB 00001190 PTEC 00000002) [ 0.000000] ACPI: FACP 0x00000000BCDF8000 00010C (v05 LENOVO TP-JB 00001190 PTEC 00000002) [ 0.000000] ACPI: DSDT 0x00000000BCDE3000 010F65 (v01 LENOVO TP-JB 00001190 INTL 20120711) [ 0.000000] ACPI: FACS 0x00000000BCD68000 000040 [ 0.000000] ACPI: SLIC 0x00000000BCDFD000 000176 (v01 LENOVO TP-JB 00001190 PTEC 00000001) [ 0.000000] ACPI: ASF! 0x00000000BCDFC000 0000A5 (v32 LENOVO TP-JB 00001190 PTEC 00000002) [ 0.000000] ACPI: HPET 0x00000000BCDFB000 000038 (v01 LENOVO TP-JB 00001190 PTEC 00000002) [ 0.000000] ACPI: ECDT 0x00000000BCDFA000 000052 (v01 LENOVO TP-JB 00001190 PTEC 00000002) [ 0.000000] ACPI: APIC 0x00000000BCDF7000 000098 (v01 LENOVO TP-JB 00001190 PTEC 00000002) [ 0.000000] ACPI: MCFG 0x00000000BCDF6000 00003C (v01 LENOVO TP-JB 00001190 PTEC 00000002) [ 0.000000] ACPI: SSDT 0x00000000BCDF5000 000033 (v01 LENOVO TP-SSDT1 00000100 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000BCDF4000 000486 (v01 LENOVO TP-SSDT2 00000200 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000BCDE2000 0009CB (v01 LENOVO SataAhci 00001000 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000BCDE1000 000152 (v01 LENOVO Rmv_Batt 00001000 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000BCDE0000 0006C9 (v01 LENOVO Cpu0Ist 00003000 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000BCDDF000 000B74 (v02 LENOVO CpuSsdt 00003000 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000BCDDE000 000369 (v02 LENOVO CtdpB 00001000 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000BCDDC000 001475 (v01 LENOVO SaSsdt 00003000 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000BCDDB000 000394 (v02 LENOVO CppcTabl 00001000 INTL 20120711) [ 0.000000] ACPI: PCCT 0x00000000BCDDA000 00006E (v05 LENOVO TP-JB 00001190 PTEC 00000002) [ 0.000000] ACPI: SSDT 0x00000000BCDD9000 000AC4 (v02 LENOVO Cpc_Tabl 00001000 INTL 20120711) [ 0.000000] ACPI: TCPA 0x00000000BCDD8000 000032 (v02 PTL LENOVO 06040000 LNVO 00000001) [ 0.000000] ACPI: SSDT 0x00000000BCDD7000 0006A3 (v01 Intel_ TpmTable 00001000 INTL 20120711) [ 0.000000] ACPI: UEFI 0x00000000BCDD6000 000042 (v01 LENOVO TP-JB 00001190 PTEC 00000002) [ 0.000000] ACPI: MSDM 0x00000000BCCB1000 000055 (v03 LENOVO TP-JB 00001190 PTEC 00000002) [ 0.000000] ACPI: BATB 0x00000000BCDD5000 000046 (v01 LENOVO TP-JB 00001190 PTEC 00000002) [ 0.000000] ACPI: FPDT 0x00000000BCDD4000 000064 (v01 LENOVO TP-JB 00001190 PTEC 00000002) [ 0.000000] ACPI: UEFI 0x00000000BCDD3000 0002E2 (v01 LENOVO TP-JB 00001190 PTEC 00000002) [ 0.000000] ACPI: BGRT 0x00000000BCDD2000 000038 (v01 LENOVO TP-JB 00001190 PTEC 00000002) [ 0.000000] ACPI: DMAR 0x00000000BCDD1000 0000B0 (v01 LENOVO TP-JB 00001190 PTEC 00000002) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000053dffffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x53dfd5000-0x53dffffff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000053dffffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff] [ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009bfff] [ 0.000000] node 0: [mem 0x000000000009d000-0x000000000009dfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000ba7b9fff] [ 0.000000] node 0: [mem 0x00000000bcdff000-0x00000000bcdfffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000053dffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000053dffffff] [ 0.000000] On node 0 totalpages: 5211990 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 23 pages reserved [ 0.000000] DMA zone: 3995 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 11871 pages used for memmap [ 0.000000] DMA32 zone: 759739 pages, LIFO batch:31 [ 0.000000] Normal zone: 69504 pages used for memmap [ 0.000000] Normal zone: 4448256 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics memory at 0x00000000be000000-0x00000000bfffffff [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xba7ba000-0xba9b9fff] [ 0.000000] PM: Registered nosave memory: [mem 0xba9ba000-0xbcbfefff] [ 0.000000] PM: Registered nosave memory: [mem 0xbcbff000-0xbcd7efff] [ 0.000000] PM: Registered nosave memory: [mem 0xbcd7f000-0xbcdfefff] [ 0.000000] PM: Registered nosave memory: [mem 0xbce00000-0xbdffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbe000000-0xbfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xf80f7fff] [ 0.000000] PM: Registered nosave memory: [mem 0xf80f8000-0xf80f8fff] [ 0.000000] PM: Registered nosave memory: [mem 0xf80f9000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xffffffff] [ 0.000000] e820: [mem 0xc0000000-0xf80f7fff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] percpu: Embedded 39 pages/cpu @ffff89e9fdc00000 s119704 r8192 d31848 u262144 [ 0.000000] pcpu-alloc: s119704 r8192 d31848 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 5130528 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.13.0-19-generic.efi.signed root=UUID=02bd5120-a925-442c-a0dd-1cce59920632 ro quiet splash psmouse.synaptics_intertouch=0 vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 20299296K/20847960K available (9294K kernel code, 2479K rwdata, 3996K rodata, 2324K init, 2384K bss, 548664K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] ftrace: allocating 37783 entries in 148 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS: 524544, nr_irqs: 760, preallocated irqs: 16 [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.004000] tsc: Detected 2294.840 MHz processor [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4589.68 BogoMIPS (lpj=9179360) [ 0.004000] pid_max: default: 32768 minimum: 301 [ 0.004000] ACPI: Core revision 20170531 [ 0.048063] ACPI: 12 ACPI AML tables successfully acquired and loaded [ 0.052284] Security Framework initialized [ 0.052288] Yama: becoming mindful. [ 0.052335] AppArmor: AppArmor initialized [ 0.067215] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes) [ 0.073439] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.073652] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.073845] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.074334] CPU: Physical Processor ID: 0 [ 0.074336] CPU: Processor Core ID: 0 [ 0.074345] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.074346] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.074356] mce: CPU supports 7 MCE banks [ 0.074375] CPU0: Thermal monitoring enabled (TM1) [ 0.074405] process: using mwait in idle threads [ 0.074411] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.074413] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.075754] Freeing SMP alternatives memory: 36K [ 0.085371] smpboot: Max logical packages: 4 [ 0.085404] DMAR: Host address width 39 [ 0.085407] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.085422] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e1ff0505e [ 0.085424] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.085432] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da [ 0.085434] DMAR: RMRR base: 0x000000bb40d000 end: 0x000000bb423fff [ 0.085437] DMAR: RMRR base: 0x000000bd800000 end: 0x000000bfffffff [ 0.085441] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.085443] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.085445] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit. [ 0.085447] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting. [ 0.086413] DMAR-IR: Enabled IRQ remapping in xapic mode [ 0.086414] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.087140] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.126854] TSC deadline timer enabled [ 0.126858] smpboot: CPU0: Intel(R) Core(TM) i5-5300U CPU @ 2.30GHz (family: 0x6, model: 0x3d, stepping: 0x4) [ 0.127006] Performance Events: PEBS fmt2+, Broadwell events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.127061] ... version: 3 [ 0.127062] ... bit width: 48 [ 0.127063] ... generic registers: 4 [ 0.127065] ... value mask: 0000ffffffffffff [ 0.127066] ... max period: 00007fffffffffff [ 0.127068] ... fixed-purpose events: 3 [ 0.127069] ... event mask: 000000070000000f [ 0.127149] Hierarchical SRCU implementation. [ 0.128000] smp: Bringing up secondary CPUs ... [ 0.128000] x86: Booting SMP configuration: [ 0.128000] .... node #0, CPUs: #1 [ 0.128000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.128000] #2 #3 [ 0.135785] smp: Brought up 1 node, 4 CPUs [ 0.135785] smpboot: Total of 4 processors activated (18358.72 BogoMIPS) [ 0.136964] devtmpfs: initialized [ 0.136964] x86/mm: Memory block size: 128MB [ 0.141182] evm: security.selinux [ 0.141184] evm: security.SMACK64 [ 0.141185] evm: security.SMACK64EXEC [ 0.141186] evm: security.SMACK64TRANSMUTE [ 0.141187] evm: security.SMACK64MMAP [ 0.141189] evm: security.ima [ 0.141190] evm: security.capability [ 0.141223] PM: Registering ACPI NVS region [mem 0xbcbff000-0xbcd7efff] (1572864 bytes) [ 0.141223] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.141223] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.141223] pinctrl core: initialized pinctrl subsystem [ 0.141223] RTC time: 1:27:14, date: 12/18/17 [ 0.141223] NET: Registered protocol family 16 [ 0.141298] cpuidle: using governor ladder [ 0.141298] cpuidle: using governor menu [ 0.141298] Error parsing PCC subspaces from PCCT [ 0.141298] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.141298] ACPI: bus type PCI registered [ 0.141298] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.141298] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.141298] PCI: not using MMCONFIG [ 0.141298] PCI: Using configuration type 1 for base access [ 0.146582] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.146582] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.146582] ACPI: Added _OSI(Module Device) [ 0.146582] ACPI: Added _OSI(Processor Device) [ 0.146582] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.146582] ACPI: Added _OSI(Processor Aggregator Device) [ 0.146582] ACPI: EC: EC started [ 0.146582] ACPI: EC: interrupt blocked [ 0.149918] ACPI: \: Used as first EC [ 0.149921] ACPI: \: GPE=0x25, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.149924] ACPI: \: Used as boot ECDT EC to handle transactions [ 0.152000] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.167035] ACPI Error: Needed type [Reference], found [Integer] ffff89e9e56f1708 (20170531/exresop-103) [ 0.167050] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20170531/dswexec-461) [ 0.167060] ACPI Error: Method parse/execution failed \_PR.CPU0._PDC, AE_AML_OPERAND_TYPE (20170531/psparse-550) [ 0.167776] ACPI: Dynamic OEM Table Load: [ 0.167802] ACPI: SSDT 0xFFFF89E9E5472800 0005AA (v01 PmRef ApIst 00003000 INTL 20120711) [ 0.172000] ACPI: Dynamic OEM Table Load: [ 0.172000] ACPI: SSDT 0xFFFF89E9E5676200 000119 (v02 PmRef ApCst 00003000 INTL 20120711) [ 0.172000] ACPI: Interpreter enabled [ 0.172000] ACPI: (supports S0 S3 S4 S5) [ 0.172000] ACPI: Using IOAPIC for interrupt routing [ 0.172000] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.172149] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources [ 0.172168] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.172748] ACPI: Enabled 6 GPEs in block 00 to 7F [ 0.183376] ACPI: Power Resource [PUBS] (on) [ 0.184620] acpi PNP0C0A:01: ACPI dock station (docks/bays count: 1) [ 0.185366] ACPI: Power Resource [NVP3] (on) [ 0.185427] ACPI: Power Resource [NVP2] (on) [ 0.193803] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.193940] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.194069] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.194197] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.194324] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.194451] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.194576] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.194702] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.194936] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f]) [ 0.194945] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.195203] acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability] [ 0.195315] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability] [ 0.195319] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability] [ 0.195323] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER] [ 0.195326] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM [ 0.195721] PCI host bridge to bus 0000:00 [ 0.195727] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.195730] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.195733] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.195736] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] [ 0.195738] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window] [ 0.195741] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] [ 0.195744] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window] [ 0.195746] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] [ 0.195749] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 0.195751] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 0.195754] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.195757] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] [ 0.195759] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff window] [ 0.195763] pci_bus 0000:00: root bus resource [bus 00-3f] [ 0.195781] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000 [ 0.195975] pci 0000:00:02.0: [8086:1616] type 00 class 0x030000 [ 0.196008] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe0ffffff 64bit] [ 0.196023] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.196034] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f] [ 0.196222] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300 [ 0.196247] pci 0000:00:03.0: reg 0x10: [mem 0xe1230000-0xe1233fff 64bit] [ 0.196471] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330 [ 0.196504] pci 0000:00:14.0: reg 0x10: [mem 0xe1220000-0xe122ffff 64bit] [ 0.196600] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.196736] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000 [ 0.196771] pci 0000:00:16.0: reg 0x10: [mem 0xe1239000-0xe123901f 64bit] [ 0.196877] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.197013] pci 0000:00:19.0: [8086:15a2] type 00 class 0x020000 [ 0.197041] pci 0000:00:19.0: reg 0x10: [mem 0xe1200000-0xe121ffff] [ 0.197054] pci 0000:00:19.0: reg 0x14: [mem 0xe123e000-0xe123efff] [ 0.197067] pci 0000:00:19.0: reg 0x18: [io 0x3080-0x309f] [ 0.197159] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.197292] pci 0000:00:1b.0: [8086:9ca0] type 00 class 0x040300 [ 0.197325] pci 0000:00:1b.0: reg 0x10: [mem 0xe1234000-0xe1237fff 64bit] [ 0.197420] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.197548] pci 0000:00:1c.0: [8086:9c9a] type 01 class 0x060400 [ 0.197664] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.197909] pci 0000:00:1c.1: [8086:9c94] type 01 class 0x060400 [ 0.198029] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.198260] pci 0000:00:1d.0: [8086:9ca6] type 00 class 0x0c0320 [ 0.198294] pci 0000:00:1d.0: reg 0x10: [mem 0xe123d000-0xe123d3ff] [ 0.198422] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.198561] pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100 [ 0.198842] pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601 [ 0.198869] pci 0000:00:1f.2: reg 0x10: [io 0x30a8-0x30af] [ 0.198881] pci 0000:00:1f.2: reg 0x14: [io 0x30bc-0x30bf] [ 0.198892] pci 0000:00:1f.2: reg 0x18: [io 0x30a0-0x30a7] [ 0.198904] pci 0000:00:1f.2: reg 0x1c: [io 0x30b8-0x30bb] [ 0.198916] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f] [ 0.198928] pci 0000:00:1f.2: reg 0x24: [mem 0xe123c000-0xe123c7ff] [ 0.198988] pci 0000:00:1f.2: PME# supported from D3hot [ 0.199110] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500 [ 0.199138] pci 0000:00:1f.3: reg 0x10: [mem 0xe1238000-0xe12380ff 64bit] [ 0.199170] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf] [ 0.199329] pci 0000:00:1f.6: [8086:9ca4] type 00 class 0x118000 [ 0.199375] pci 0000:00:1f.6: reg 0x10: [mem 0xe123b000-0xe123bfff 64bit] [ 0.199744] pci 0000:02:00.0: [10ec:5227] type 00 class 0xff0000 [ 0.199839] pci 0000:02:00.0: reg 0x10: [mem 0xe1100000-0xe1100fff] [ 0.200341] pci 0000:02:00.0: supports D1 D2 [ 0.200344] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.212062] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.212070] pci 0000:00:1c.0: bridge window [mem 0xe1100000-0xe11fffff] [ 0.212414] pci 0000:03:00.0: [8086:095b] type 00 class 0x028000 [ 0.212579] pci 0000:03:00.0: reg 0x10: [mem 0xe1000000-0xe1001fff 64bit] [ 0.213049] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.224276] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.224285] pci 0000:00:1c.1: bridge window [mem 0xe1000000-0xe10fffff] [ 0.226584] ACPI: EC: EC stopped [ 0.226586] ACPI: EC: EC started [ 0.226587] ACPI: EC: interrupt blocked [ 0.227088] ACPI: EC: interrupt unblocked [ 0.227098] ACPI: EC: event unblocked [ 0.227108] ACPI: \_SB_.PCI0.LPC_.EC__: GPE=0x25, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.227112] ACPI: \_SB_.PCI0.LPC_.EC__: Used as boot ECDT EC to handle transactions and events [ 0.227169] ACPI: \_SB_.PCI0.LPC_.EC__: GPE=0x25, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.227172] ACPI: \_SB_.PCI0.LPC_.EC__: Used as boot DSDT EC to handle transactions and events [ 0.227685] SCSI subsystem initialized [ 0.227718] libata version 3.00 loaded. [ 0.227718] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=mem,locks=none [ 0.227718] pci 0000:00:02.0: vgaarb: setting as boot device [ 0.227718] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.227718] vgaarb: loaded [ 0.227718] ACPI: bus type USB registered [ 0.227718] usbcore: registered new interface driver usbfs [ 0.227718] usbcore: registered new interface driver hub [ 0.228021] usbcore: registered new device driver usb [ 0.228098] EDAC MC: Ver: 3.0.0 [ 0.228295] Registered efivars operations [ 0.264071] PCI: Using ACPI for IRQ routing [ 0.266280] PCI: pci_cache_line_size set to 64 bytes [ 0.266628] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ 0.266631] e820: reserve RAM buffer [mem 0x0009c000-0x0009ffff] [ 0.266633] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] [ 0.266635] e820: reserve RAM buffer [mem 0xba7ba000-0xbbffffff] [ 0.266638] e820: reserve RAM buffer [mem 0xbce00000-0xbfffffff] [ 0.266640] e820: reserve RAM buffer [mem 0x53e000000-0x53fffffff] [ 0.266818] NetLabel: Initializing [ 0.266820] NetLabel: domain hash size = 128 [ 0.266821] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.266862] NetLabel: unlabeled traffic allowed by default [ 0.266894] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.266894] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.269041] clocksource: Switched to clocksource hpet [ 0.293260] VFS: Disk quotas dquot_6.6.0 [ 0.293302] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.293537] AppArmor: AppArmor Filesystem Enabled [ 0.293630] pnp: PnP ACPI init [ 0.294468] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.294473] system 00:00: [mem 0x000e0000-0x000e3fff] has been reserved [ 0.294477] system 00:00: [mem 0x000e4000-0x000e7fff] has been reserved [ 0.294480] system 00:00: [mem 0x000e8000-0x000ebfff] has been reserved [ 0.294483] system 00:00: [mem 0x000ec000-0x000effff] has been reserved [ 0.294487] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved [ 0.294491] system 00:00: [mem 0x00100000-0xbfffffff] could not be reserved [ 0.294494] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved [ 0.294498] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved [ 0.294507] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.294723] pnp 00:01: [Firmware Bug]: PNP resource [mem 0xfed10000-0xfed13fff] covers only part of 0000:00:00.0 Intel MCH; extending to [mem 0xfed10000-0xfed17fff] [ 0.294763] system 00:01: [io 0x1800-0x189f] has been reserved [ 0.294767] system 00:01: [io 0x0800-0x087f] has been reserved [ 0.294771] system 00:01: [io 0x0880-0x08ff] has been reserved [ 0.294774] system 00:01: [io 0x0900-0x097f] has been reserved [ 0.294777] system 00:01: [io 0x0980-0x09ff] has been reserved [ 0.294780] system 00:01: [io 0x0a00-0x0a7f] has been reserved [ 0.294783] system 00:01: [io 0x0a80-0x0aff] has been reserved [ 0.294786] system 00:01: [io 0x0b00-0x0b7f] has been reserved [ 0.294789] system 00:01: [io 0x0b80-0x0bff] has been reserved [ 0.294793] system 00:01: [io 0x15e0-0x15ef] has been reserved [ 0.294796] system 00:01: [io 0x1600-0x167f] has been reserved [ 0.294803] system 00:01: [io 0x1640-0x165f] has been reserved [ 0.294809] system 00:01: [mem 0xf8000000-0xfbffffff] could not be reserved [ 0.294813] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.294816] system 00:01: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.294820] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.294823] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.294827] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved [ 0.294832] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.294986] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.295033] pnp 00:03: Plug and Play ACPI device, IDs LEN0071 PNP0303 (active) [ 0.295074] pnp 00:04: Plug and Play ACPI device, IDs LEN200f PNP0f13 (active) [ 0.295650] pnp 00:05: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active) [ 0.296073] system 00:06: [mem 0xc0010000-0xc001ffff] has been reserved [ 0.296077] system 00:06: [mem 0xc0000000-0xc000ffff] has been reserved [ 0.296082] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.296164] pnp: PnP ACPI: found 7 devices [ 0.304166] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.304205] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.304214] pci 0000:00:1c.0: bridge window [mem 0xe1100000-0xe11fffff] [ 0.304227] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.304235] pci 0000:00:1c.1: bridge window [mem 0xe1000000-0xe10fffff] [ 0.304250] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.304254] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.304257] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.304260] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] [ 0.304263] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window] [ 0.304266] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window] [ 0.304269] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window] [ 0.304271] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window] [ 0.304274] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window] [ 0.304277] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window] [ 0.304280] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window] [ 0.304283] pci_bus 0000:00: resource 15 [mem 0xc0000000-0xfebfffff window] [ 0.304285] pci_bus 0000:00: resource 16 [mem 0xfed40000-0xfed4bfff window] [ 0.304289] pci_bus 0000:02: resource 1 [mem 0xe1100000-0xe11fffff] [ 0.304292] pci_bus 0000:03: resource 1 [mem 0xe1000000-0xe10fffff] [ 0.304522] NET: Registered protocol family 2 [ 0.305018] TCP established hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.305902] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.306175] TCP: Hash tables configured (established 262144 bind 65536) [ 0.306302] UDP hash table entries: 16384 (order: 7, 524288 bytes) [ 0.306516] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes) [ 0.306780] NET: Registered protocol family 1 [ 0.306809] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.307693] PCI: CLS 64 bytes, default 64 [ 0.307775] Unpacking initramfs... [ 2.535444] Freeing initrd memory: 49644K [ 2.535525] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 2.535530] software IO TLB [mem 0xab58b000-0xaf58b000] (64MB) mapped at [ffff89e56b58b000-ffff89e56f58afff] [ 2.535999] Scanning for low memory corruption every 60 seconds [ 2.536676] audit: initializing netlink subsys (disabled) [ 2.536752] audit: type=2000 audit(1513560436.536:1): state=initialized audit_enabled=0 res=1 [ 2.537702] Initialise system trusted keyrings [ 2.537719] Key type blacklist registered [ 2.537779] workingset: timestamp_bits=36 max_order=23 bucket_order=0 [ 2.540654] zbud: loaded [ 2.541567] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 2.541864] fuse init (API version 7.26) [ 2.544738] Key type asymmetric registered [ 2.544740] Asymmetric key parser 'x509' registered [ 2.544829] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 2.544895] io scheduler noop registered [ 2.544896] io scheduler deadline registered [ 2.544958] io scheduler cfq registered (default) [ 2.545799] efifb: probing for efifb [ 2.545834] efifb: framebuffer at 0xd0000000, using 8128k, total 8128k [ 2.545836] efifb: mode is 1920x1080x32, linelength=7680, pages=1 [ 2.545837] efifb: scrolling: redraw [ 2.545841] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 2.546076] Console: switching to colour frame buffer device 240x67 [ 2.546142] fb0: EFI VGA frame buffer device [ 2.546158] intel_idle: MWAIT substates: 0x11142120 [ 2.546161] intel_idle: v0.4.1 model 0x3D [ 2.546602] intel_idle: lapic_timer_reliable_states 0xffffffff [ 2.546921] ACPI: AC Adapter [AC] (off-line) [ 2.547247] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 2.547527] ACPI: Lid Switch [LID] [ 2.547628] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 2.547668] ACPI: Sleep Button [SLPB] [ 2.547767] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 2.547813] ACPI: Power Button [PWRF] [ 2.549355] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 2.549806] thermal LNXTHERM:00: registered as thermal_zone0 [ 2.549808] ACPI: Thermal Zone [THM0] (40 C) [ 2.549906] GHES: HEST is not enabled! [ 2.550195] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 2.553746] Linux agpgart interface v0.103 [ 2.559472] ACPI: Battery Slot [BAT0] (battery present) [ 2.568766] ACPI: Battery Slot [BAT1] (battery present) [ 2.572066] tpm_tis 00:05: 1.2 TPM (device-id 0x0, rev-id 78) [ 2.652131] tpm tpm0: A TPM error (6) occurred attempting to read a pcr value [ 2.652141] tpm tpm0: TPM is disabled/deactivated (0x6) [ 2.657380] loop: module loaded [ 2.657745] libphy: Fixed MDIO Bus: probed [ 2.657748] tun: Universal TUN/TAP device driver, 1.6 [ 2.657822] PPP generic driver version 2.4.2 [ 2.657914] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.657918] ehci-pci: EHCI PCI platform driver [ 2.658201] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 2.658213] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 2.658235] ehci-pci 0000:00:1d.0: debug port 2 [ 2.662167] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 2.662196] ehci-pci 0000:00:1d.0: irq 23, io mem 0xe123d000 [ 2.676036] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 2.676113] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.676116] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.676119] usb usb1: Product: EHCI Host Controller [ 2.676122] usb usb1: Manufacturer: Linux 4.13.0-19-generic ehci_hcd [ 2.676124] usb usb1: SerialNumber: 0000:00:1d.0 [ 2.676352] hub 1-0:1.0: USB hub found [ 2.676362] hub 1-0:1.0: 3 ports detected [ 2.676921] ehci-platform: EHCI generic platform driver [ 2.676950] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.676959] ohci-pci: OHCI PCI platform driver [ 2.676979] ohci-platform: OHCI generic platform driver [ 2.676993] uhci_hcd: USB Universal Host Controller Interface driver [ 2.677244] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 2.677254] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 2.678358] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0004b810 [ 2.678365] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 2.678500] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.678503] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.678506] usb usb2: Product: xHCI Host Controller [ 2.678509] usb usb2: Manufacturer: Linux 4.13.0-19-generic xhci-hcd [ 2.678511] usb usb2: SerialNumber: 0000:00:14.0 [ 2.678734] hub 2-0:1.0: USB hub found [ 2.678751] hub 2-0:1.0: 11 ports detected [ 2.680758] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 2.680766] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 2.680829] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003 [ 2.680832] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.680835] usb usb3: Product: xHCI Host Controller [ 2.680838] usb usb3: Manufacturer: Linux 4.13.0-19-generic xhci-hcd [ 2.680840] usb usb3: SerialNumber: 0000:00:14.0 [ 2.681057] hub 3-0:1.0: USB hub found [ 2.681069] hub 3-0:1.0: 4 ports detected [ 2.682128] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 2.684032] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.684043] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.684299] mousedev: PS/2 mouse device common for all mice [ 2.684621] rtc_cmos 00:02: RTC can wake from S4 [ 2.684878] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 2.684926] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 2.684945] i2c /dev entries driver [ 2.685065] device-mapper: uevent: version 1.0.3 [ 2.685203] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com [ 2.685218] intel_pstate: Intel P-state driver initializing [ 2.685506] ledtrig-cpu: registered to indicate activity on CPUs [ 2.685510] EFI Variables Facility v0.08 2004-May-17 [ 2.686252] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 2.702492] NET: Registered protocol family 10 [ 2.705167] Segment Routing with IPv6 [ 2.705182] NET: Registered protocol family 17 [ 2.705189] Key type dns_resolver registered [ 2.705414] RAS: Correctable Errors collector initialized. [ 2.705455] microcode: sig=0x306d4, pf=0x40, revision=0x25 [ 2.705520] microcode: Microcode Update Driver: v2.2. [ 2.705539] sched_clock: Marking stable (2705515762, 0)->(2789376512, -83860750) [ 2.705700] registered taskstats version 1 [ 2.705707] Loading compiled-in X.509 certificates [ 2.707494] Loaded X.509 cert 'Build time autogenerated kernel key: bb9f2adf4533cce516ad8afef0231093efa8e8d6' [ 2.707722] Loaded UEFI:db cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' linked to secondary sys keyring [ 2.707739] Loaded UEFI:db cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' linked to secondary sys keyring [ 2.707752] Loaded UEFI:db cert 'Lenovo Ltd.: ThinkPad Product CA 2012: 838b1f54c1550463f45f98700640f11069265949' linked to secondary sys keyring [ 2.707764] Loaded UEFI:db cert 'Lenovo UEFI CA 2014: 4b91a68732eaefdd2c8ffffc6b027ec3449e9c8f' linked to secondary sys keyring [ 2.709661] Loaded UEFI:MokListRT cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' linked to secondary sys keyring [ 2.709832] zswap: loaded using pool lzo/zbud [ 2.712298] Key type big_key registered [ 2.712301] Key type trusted registered [ 2.713397] Key type encrypted registered [ 2.713399] AppArmor: AppArmor sha1 policy hashing enabled [ 2.728086] tpm tpm0: A TPM error (6) occurred attempting to read a pcr value [ 2.728090] ima: No TPM chip found, activating TPM-bypass! (rc=6) [ 2.728116] evm: HMAC attrs: 0x1 [ 2.728537] Magic number: 13:418:458 [ 2.728681] rtc_cmos 00:02: setting system clock to 2017-12-18 01:27:17 UTC (1513560437) [ 2.728824] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.728825] EDD information not available. [ 2.728855] PM: Hibernation image not present or could not be loaded. [ 2.730613] Freeing unused kernel memory: 2324K [ 2.730614] Write protecting the kernel read-only data: 14336k [ 2.730889] Freeing unused kernel memory: 932K [ 2.731091] Freeing unused kernel memory: 100K [ 2.732418] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.786682] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00) [ 2.786781] acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00) [ 2.808240] pps_core: LinuxPPS API ver. 1 registered [ 2.808241] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.809627] PTP clock support registered [ 2.815120] ahci 0000:00:1f.2: version 3.0 [ 2.816863] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 2.816864] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.825347] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0x1 impl SATA mode [ 2.825349] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst [ 2.825632] scsi host0: ahci [ 2.825701] scsi host1: ahci [ 2.825756] scsi host2: ahci [ 2.825782] ata1: SATA max UDMA/133 abar m2048@0xe123c000 port 0xe123c100 irq 44 [ 2.825783] ata2: DUMMY [ 2.825784] ata3: DUMMY [ 2.825933] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 3.004046] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 3.008974] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock [ 3.012020] usb 2-5: new full-speed USB device number 2 using xhci_hcd [ 3.075376] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 50:7b:9d:91:45:63 [ 3.075378] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 3.075415] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: 1000FF-0FF [ 3.075489] i915 0000:00:02.0: enabling device (0006 -> 0007) [ 3.075759] [drm] Memory usable by graphics device = 4096M [ 3.075761] checking generic (d0000000 7f0000) vs hw (d0000000 10000000) [ 3.075762] fb: switching to inteldrmfb from EFI VGA [ 3.075799] Console: switching to colour dummy device 80x25 [ 3.075873] [drm] Replacing VGA console driver [ 3.076220] e1000e 0000:00:19.0 enp0s25: renamed from eth0 [ 3.081950] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.081951] [drm] Driver supports precise vblank timestamp query. [ 3.082535] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=mem [ 3.088180] [drm] Initialized i915 1.6.0 20170619 for 0000:00:02.0 on minor 0 [ 3.088699] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 3.089117] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6 [ 3.139182] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 3.140145] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 3.140148] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 3.140149] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 3.140168] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [ 3.140275] ata1.00: ATA-9: CT960BX200SSD1, MU01.6, max UDMA/133 [ 3.140276] ata1.00: 1875385008 sectors, multi 1: LBA48 NCQ (depth 31/32), AA [ 3.140644] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 3.140645] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 3.140646] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 3.140665] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [ 3.140964] ata1.00: configured for UDMA/133 [ 3.141137] scsi 0:0:0:0: Direct-Access ATA CT960BX200SSD1 .6 PQ: 0 ANSI: 5 [ 3.152345] usb 1-1: New USB device found, idVendor=8087, idProduct=8001 [ 3.152347] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.152608] hub 1-1:1.0: USB hub found [ 3.152707] hub 1-1:1.0: 8 ports detected [ 3.181674] usb 2-5: New USB device found, idVendor=04f3, idProduct=0418 [ 3.181676] usb 2-5: New USB device strings: Mfr=4, Product=14, SerialNumber=0 [ 3.181677] usb 2-5: Product: Touchscreen [ 3.181678] usb 2-5: Manufacturer: ELAN [ 3.184415] hidraw: raw HID events driver (C) Jiri Kosina [ 3.191160] usbcore: registered new interface driver usbhid [ 3.191161] usbhid: USB HID core driver [ 3.200262] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.200376] sd 0:0:0:0: [sda] 1875385008 512-byte logical blocks: (960 GB/894 GiB) [ 3.200378] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 3.200410] sd 0:0:0:0: [sda] Write Protect is off [ 3.200412] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.200517] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.201729] sda: sda1 sda2 sda3 sda4 sda5 [ 3.202112] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.300016] usb 2-6: new full-speed USB device number 3 using xhci_hcd [ 3.441064] usb 2-6: New USB device found, idVendor=138a, idProduct=0017 [ 3.441065] usb 2-6: New USB device strings: Mfr=0, Product=0, SerialNumber=1 [ 3.441066] usb 2-6: SerialNumber: d3df8122abfc [ 3.473027] fbcon: inteldrmfb (fb0) is primary device [ 3.473112] Console: switching to colour frame buffer device 240x67 [ 3.473150] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 3.547982] tsc: Refined TSC clocksource calibration: 2294.682 MHz [ 3.547991] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2113955381f, max_idle_ns: 440795222875 ns [ 3.560009] usb 2-7: new full-speed USB device number 4 using xhci_hcd [ 3.596367] psmouse serio1: synaptics: queried max coordinates: x [..5676], y [..4758] [ 3.654284] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1096..] [ 3.701356] usb 2-7: New USB device found, idVendor=8087, idProduct=0a2a [ 3.701358] usb 2-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.713597] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xf004a3/0x943300/0x12e800/0x10000, board id: 3053, fw id: 2560 [ 3.713602] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0 [ 3.750082] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5 [ 3.820012] usb 2-8: new high-speed USB device number 5 using xhci_hcd [ 3.970027] usb 2-8: New USB device found, idVendor=04ca, idProduct=703c [ 3.970029] usb 2-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.970030] usb 2-8: Product: Integrated Camera [ 3.970031] usb 2-8: Manufacturer: J89FC42JM [ 4.385621] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 4.572163] clocksource: Switched to clocksource tsc [ 4.584485] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input7 [ 8.801105] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 8.923537] ip_tables: (C) 2000-2006 Netfilter Core Team [ 8.956950] systemd[1]: systemd 234 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid) [ 8.957052] systemd[1]: Detected architecture x86-64. [ 8.957251] systemd[1]: Set hostname to . [ 9.089455] systemd[1]: Listening on Syslog Socket. [ 9.089533] systemd[1]: Listening on udev Control Socket. [ 9.089691] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 9.089714] systemd[1]: Listening on udev Kernel Socket. [ 9.089744] systemd[1]: Listening on Journal Socket. [ 9.089780] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 9.089909] systemd[1]: Created slice System Slice. [ 9.110614] lp: driver loaded but no devices found [ 9.118568] ppdev: user-space parallel port driver [ 9.120209] RPC: Registered named UNIX socket transport module. [ 9.120210] RPC: Registered udp transport module. [ 9.120210] RPC: Registered tcp transport module. [ 9.120211] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 9.163190] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro [ 9.173798] systemd-journald[333]: Received request to flush runtime journal from PID 1 [ 9.292396] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 9.314132] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 9.328471] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 9.332073] Non-volatile memory driver v1.3 [ 9.337815] thinkpad_acpi: ThinkPad ACPI Extras v0.25 [ 9.337817] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 9.337818] thinkpad_acpi: ThinkPad BIOS JBET54WW (1.19 ), EC unknown [ 9.337819] thinkpad_acpi: Lenovo ThinkPad T450s, model 20BXCTO1WW [ 9.340542] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3232: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 9.340544] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 9.340546] snd_hda_codec_realtek hdaudioC1D0: hp_outs=2 (0x16/0x15/0x0/0x0/0x0) [ 9.340547] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 9.340548] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 9.340550] snd_hda_codec_realtek hdaudioC1D0: Dock Mic=0x19 [ 9.340551] snd_hda_codec_realtek hdaudioC1D0: Mic=0x1a [ 9.340552] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12 [ 9.340652] thinkpad_hwmon thinkpad_hwmon: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 9.341206] thinkpad_acpi: radio switch found; radios are enabled [ 9.341223] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver [ 9.341224] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... [ 9.341711] random: crng init done [ 9.342501] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input9 [ 9.342564] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input10 [ 9.342623] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11 [ 9.342676] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12 [ 9.342730] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13 [ 9.348887] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked [ 9.390878] Intel(R) Wireless WiFi driver for Linux [ 9.390879] Copyright(c) 2003- 2015 Intel Corporation [ 9.393662] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input8 [ 9.398121] media: Linux media interface: v0.10 [ 9.401752] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb2/2-5/2-5:1.0/0003:04F3:0418.0001/input/input14 [ 9.406094] Linux video capture interface: v2.00 [ 9.406948] hid-multitouch 0003:04F3:0418.0001: input,hiddev0,hidraw0: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:14.0-5/input0 [ 9.407042] iwlwifi 0000:03:00.0: loaded firmware version 29.610311.0 op_mode iwlmvm [ 9.450561] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer [ 9.450563] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 9.450564] RAPL PMU: hw unit of domain package 2^-14 Joules [ 9.450565] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 9.450565] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 9.455083] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input18 [ 9.455142] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input19 [ 9.455200] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input20 [ 9.455254] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input21 [ 9.464504] iwlwifi 0000:03:00.0: Detected Intel(R) Dual Band Wireless AC 7265, REV=0x210 [ 9.464788] uvcvideo: Found UVC 1.00 device Integrated Camera (04ca:703c) [ 9.475611] Bluetooth: Core ver 2.22 [ 9.475628] NET: Registered protocol family 31 [ 9.475629] Bluetooth: HCI device and connection manager initialized [ 9.475632] Bluetooth: HCI socket layer initialized [ 9.475634] Bluetooth: L2CAP socket layer initialized [ 9.475644] Bluetooth: SCO socket layer initialized [ 9.476031] uvcvideo 2-8:1.0: Entity type for entity Extension 4 was not initialized! [ 9.476045] uvcvideo 2-8:1.0: Entity type for entity Extension 3 was not initialized! [ 9.476047] uvcvideo 2-8:1.0: Entity type for entity Processing 2 was not initialized! [ 9.476048] uvcvideo 2-8:1.0: Entity type for entity Camera 1 was not initialized! [ 9.477778] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:14.0/usb2/2-8/2-8:1.0/input/input22 [ 9.478407] usbcore: registered new interface driver uvcvideo [ 9.478409] USB Video Class driver (1.1.1) [ 9.483820] AVX2 version of gcm_enc/dec engaged. [ 9.483822] AES CTR mode by8 optimization enabled [ 9.488204] usbcore: registered new interface driver btusb [ 9.490745] iwlwifi 0000:03:00.0: base HW address: 18:5e:0f:9d:52:1a [ 9.502538] Bluetooth: hci0: read Intel version: 370810011003110e00 [ 9.503411] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq [ 9.560020] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 9.560271] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 9.560291] thermal thermal_zone2: failed to read out thermal zone (-5) [ 9.574245] intel_rapl: Found RAPL domain package [ 9.574247] intel_rapl: Found RAPL domain core [ 9.574248] intel_rapl: Found RAPL domain uncore [ 9.574249] intel_rapl: Found RAPL domain dram [ 9.608341] usb 2-7: USB disconnect, device number 4 [ 9.617212] intel-spi intel-spi: w25q128 (16384 Kbytes) [ 9.626330] Creating 1 MTD partitions on "intel-spi": [ 9.626334] 0x000000000000-0x000001000000 : "BIOS" [ 9.684378] iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0 [ 9.718552] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null) [ 9.727016] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [ 9.804384] Adding 20847100k swap on /dev/mapper/cryptswap1. Priority:-1 extents:1 across:20847100k SSFS [ 9.804833] audit: type=1400 audit(1513560444.576:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=814 comm="apparmor_parser" [ 9.805022] audit: type=1400 audit(1513560444.576:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=815 comm="apparmor_parser" [ 9.806604] audit: type=1400 audit(1513560444.577:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=817 comm="apparmor_parser" [ 9.810720] audit: type=1400 audit(1513560444.582:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-soffice" pid=816 comm="apparmor_parser" [ 9.811447] audit: type=1400 audit(1513560444.582:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=811 comm="apparmor_parser" [ 9.811451] audit: type=1400 audit(1513560444.582:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=811 comm="apparmor_parser" [ 9.811454] audit: type=1400 audit(1513560444.582:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=811 comm="apparmor_parser" [ 9.811456] audit: type=1400 audit(1513560444.582:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=811 comm="apparmor_parser" [ 9.813896] audit: type=1400 audit(1513560444.585:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=819 comm="apparmor_parser" [ 9.814006] audit: type=1400 audit(1513560444.585:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=818 comm="apparmor_parser" [ 10.064369] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 10.064370] Bluetooth: BNEP filters: protocol multicast [ 10.064374] Bluetooth: BNEP socket layer initialized [ 10.595817] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 10.872105] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 10.876537] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 10.978788] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 11.095263] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 11.611969] Bluetooth: hci0 command 0xfc8e tx timeout [ 16.047287] vboxdrv: loading out-of-tree module taints kernel. [ 16.047561] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel [ 16.053246] vboxdrv: Found 4 processor cores [ 16.076221] vboxdrv: TSC mode is Invariant, tentative frequency 2294682549 Hz [ 16.076222] vboxdrv: Successfully loaded version 5.1.30_Ubuntu (interface 0x002a0000) [ 16.081677] VBoxNetFlt: Successfully started. [ 16.086278] VBoxNetAdp: Successfully started. [ 16.092265] VBoxPciLinuxInit [ 16.094875] vboxpci: IOMMU not found (not registered) [ 16.572367] usb 2-6: reset full-speed USB device number 3 using xhci_hcd [ 17.285060] xhci_hcd 0000:00:14.0: WARN Event TRB for slot 2 ep 4 with no TDs queued? [ 19.676091] Bluetooth: hci0 sending Intel patch command (0xfc8e) failed (-110) [ 19.676204] Bluetooth: hci0 sending frame failed (-19) [ 21.692087] Bluetooth: hci0 command 0xfc11 tx timeout [ 21.692093] Bluetooth: hci0: Exiting manufacturer mode failed (-110) [ 34.092367] usb 2-6: reset full-speed USB device number 3 using xhci_hcd [ 34.803852] xhci_hcd 0000:00:14.0: WARN Event TRB for slot 2 ep 4 with no TDs queued? [ 41.718904] xhci_hcd 0000:00:14.0: WARN Event TRB for slot 2 ep 4 with no TDs queued? [ 41.801946] xhci_hcd 0000:00:14.0: WARN Event TRB for slot 2 ep 4 with no TDs queued? [ 41.854366] xhci_hcd 0000:00:14.0: WARN Event TRB for slot 2 ep 4 with no TDs queued? [ 42.301806] xhci_hcd 0000:00:14.0: WARN Event TRB for slot 2 ep 4 with no TDs queued? [ 42.376858] xhci_hcd 0000:00:14.0: WARN Event TRB for slot 2 ep 4 with no TDs queued? [ 42.429496] xhci_hcd 0000:00:14.0: WARN Event TRB for slot 2 ep 4 with no TDs queued? [ 45.721644] xhci_hcd 0000:00:14.0: WARN Event TRB for slot 2 ep 4 with no TDs queued? [ 45.844520] xhci_hcd 0000:00:14.0: WARN Event TRB for slot 2 ep 4 with no TDs queued? [ 50.658044] Could not find key with description: [85dad3bab9b4612a] [ 50.658048] process_request_key_err: No key [ 50.658049] Could not find valid key in user session keyring for sig specified in mount option: [85dad3bab9b4612a] [ 50.658051] One or more global auth toks could not properly register; rc = [-2] [ 50.658052] Error parsing options; rc = [-2] [ 54.165515] rfkill: input handler disabled [ 227.230310] PM: Syncing filesystems ... done. [ 227.231834] PM: Preparing system for sleep (mem) [ 227.232277] Freezing user space processes ... (elapsed 0.002 seconds) done. [ 227.234296] OOM killer disabled. [ 227.234297] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 227.235567] PM: Suspending system (mem) [ 227.235590] Suspending console(s) (use no_console_suspend to debug) [ 227.359484] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 227.359560] sd 0:0:0:0: [sda] Stopping disk [ 227.576517] e1000e: EEE TX LPI TIMER: 00000011 [ 229.066381] PM: suspend of devices complete after 1830.627 msecs [ 229.083987] PM: late suspend of devices complete after 17.603 msecs [ 229.135991] PM: noirq suspend of devices complete after 51.998 msecs [ 229.136450] ACPI: Preparing to enter system sleep state S3 [ 229.440009] ACPI: EC: event blocked [ 229.440010] ACPI: EC: EC stopped [ 229.440010] PM: Saving platform NVS memory [ 229.440030] Disabling non-boot CPUs ... [ 229.456446] IRQ 42: no longer affine to CPU1 [ 229.456453] IRQ 44: no longer affine to CPU1 [ 229.457492] smpboot: CPU 1 is now offline [ 229.481721] smpboot: CPU 2 is now offline [ 229.504498] IRQ 1: no longer affine to CPU3 [ 229.504504] IRQ 8: no longer affine to CPU3 [ 229.504508] IRQ 9: no longer affine to CPU3 [ 229.504513] IRQ 12: no longer affine to CPU3 [ 229.504519] IRQ 23: no longer affine to CPU3 [ 229.504536] IRQ 46: no longer affine to CPU3 [ 229.504542] IRQ 50: no longer affine to CPU3 [ 229.505556] smpboot: CPU 3 is now offline [ 229.507500] ACPI: Low-level resume complete [ 229.507559] ACPI: EC: EC started [ 229.507559] PM: Restoring platform NVS memory [ 229.507878] Suspended for 184.722 seconds [ 229.509587] Enabling non-boot CPUs ... [ 229.509638] x86: Booting SMP configuration: [ 229.509638] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 229.589922] cache: parent cpu1 should not be sleeping [ 229.590070] CPU1 is up [ 229.590090] smpboot: Booting Node 0 Processor 2 APIC 0x2 [ 229.669924] cache: parent cpu2 should not be sleeping [ 229.670096] CPU2 is up [ 229.670129] smpboot: Booting Node 0 Processor 3 APIC 0x3 [ 229.753928] cache: parent cpu3 should not be sleeping [ 229.754582] CPU3 is up [ 229.761652] ACPI: Waking up from system sleep state S3 [ 230.357955] PM: noirq resume of devices complete after 52.003 msecs [ 230.360053] PM: early resume of devices complete after 2.082 msecs [ 230.360351] ACPI: EC: event unblocked [ 230.361021] sd 0:0:0:0: [sda] Starting disk [ 230.389983] tpm tpm0: A TPM error (6) occurred attempting to read a pcr value [ 230.389986] tpm tpm0: TPM is disabled/deactivated (0x6) [ 230.421775] xhci_hcd 0000:00:14.0: port 7 resume PLC timeout [ 230.437599] xhci_hcd 0000:00:14.0: port 5 resume PLC timeout [ 230.453616] xhci_hcd 0000:00:14.0: port 4 resume PLC timeout [ 230.677813] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 230.681894] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 230.681896] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 230.681897] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 230.682137] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [ 230.686424] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 230.686426] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 230.686427] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 230.686673] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [ 230.687938] ata1.00: configured for UDMA/133 [ 230.690032] usb 2-5: reset full-speed USB device number 2 using xhci_hcd [ 230.950163] usb 2-8: reset high-speed USB device number 5 using xhci_hcd [ 231.129163] psmouse serio1: synaptics: queried max coordinates: x [..5676], y [..4758] [ 231.160788] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1096..] [ 231.210275] usb 2-6: reset full-speed USB device number 3 using xhci_hcd [ 231.351686] PM: resume of devices complete after 991.624 msecs [ 231.352198] acpi LNXPOWER:02: Turning OFF [ 231.352575] PM: Finishing wakeup. [ 231.352577] OOM killer enabled. [ 231.352578] Restarting tasks ... done. [ 231.377006] thermal thermal_zone2: failed to read out thermal zone (-5) [ 231.485009] e1000e: enp0s25 NIC Link is Down [ 231.485780] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 231.674063] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 231.678076] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 231.796459] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 231.846143] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 233.443072] rfkill: input handler enabled [ 235.298171] usb 2-6: reset full-speed USB device number 3 using xhci_hcd [ 235.992826] xhci_hcd 0000:00:14.0: WARN Event TRB for slot 2 ep 4 with no TDs queued? [ 238.613144] xhci_hcd 0000:00:14.0: WARN Event TRB for slot 2 ep 4 with no TDs queued? [ 238.694628] xhci_hcd 0000:00:14.0: WARN Event TRB for slot 2 ep 4 with no TDs queued? [ 239.059782] rfkill: input handler disabled [ 325.774909] wlp3s0: authenticate with 88:36:5f:b3:33:25 [ 325.780453] wlp3s0: send auth to 88:36:5f:b3:33:25 (try 1/3) [ 325.784599] wlp3s0: authenticated [ 325.786935] wlp3s0: associate with 88:36:5f:b3:33:25 (try 1/3) [ 325.792638] wlp3s0: RX AssocResp from 88:36:5f:b3:33:25 (capab=0x411 status=0 aid=1) [ 325.804478] wlp3s0: associated [ 325.804532] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [ 333.091366] wlp3s0: deauthenticating from 88:36:5f:b3:33:25 by local choice (Reason: 3=DEAUTH_LEAVING) [ 333.098041] wlp3s0: failed to remove key (1, ff:ff:ff:ff:ff:ff) from hardware (-22) [ 338.227418] PM: Syncing filesystems ... done. [ 338.233056] PM: Preparing system for sleep (mem) [ 338.233463] Freezing user space processes ... (elapsed 0.002 seconds) done. [ 338.235686] OOM killer disabled. [ 338.235686] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 338.237086] PM: Suspending system (mem) [ 338.237109] Suspending console(s) (use no_console_suspend to debug) [ 338.363831] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 338.363918] sd 0:0:0:0: [sda] Stopping disk [ 338.590312] e1000e: EEE TX LPI TIMER: 00000011 [ 338.800902] PM: suspend of devices complete after 563.640 msecs [ 338.818081] PM: late suspend of devices complete after 17.172 msecs [ 338.869943] PM: noirq suspend of devices complete after 51.853 msecs [ 338.870689] ACPI: Preparing to enter system sleep state S3 [ 339.173950] ACPI: EC: event blocked [ 339.173952] ACPI: EC: EC stopped [ 339.173953] PM: Saving platform NVS memory [ 339.173980] Disabling non-boot CPUs ... [ 339.190707] IRQ 23: no longer affine to CPU1 [ 339.190715] IRQ 42: no longer affine to CPU1 [ 339.190723] IRQ 50: no longer affine to CPU1 [ 339.192498] smpboot: CPU 1 is now offline [ 339.210628] IRQ 46: no longer affine to CPU2 [ 339.211652] smpboot: CPU 2 is now offline [ 339.234434] IRQ 1: no longer affine to CPU3 [ 339.234440] IRQ 8: no longer affine to CPU3 [ 339.234444] IRQ 9: no longer affine to CPU3 [ 339.234449] IRQ 12: no longer affine to CPU3 [ 339.234463] IRQ 44: no longer affine to CPU3 [ 339.235485] smpboot: CPU 3 is now offline [ 339.237435] ACPI: Low-level resume complete [ 339.237495] ACPI: EC: EC started [ 339.237495] PM: Restoring platform NVS memory [ 339.237815] Suspended for 69.271 seconds [ 339.239533] Enabling non-boot CPUs ... [ 339.239590] x86: Booting SMP configuration: [ 339.239591] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 339.319826] cache: parent cpu1 should not be sleeping [ 339.319981] CPU1 is up [ 339.320004] smpboot: Booting Node 0 Processor 2 APIC 0x2 [ 339.403827] cache: parent cpu2 should not be sleeping [ 339.404015] CPU2 is up [ 339.404052] smpboot: Booting Node 0 Processor 3 APIC 0x3 [ 339.487831] cache: parent cpu3 should not be sleeping [ 339.488570] CPU3 is up [ 339.495650] ACPI: Waking up from system sleep state S3 [ 340.087869] PM: noirq resume of devices complete after 51.998 msecs [ 340.090015] PM: early resume of devices complete after 2.129 msecs [ 340.090252] ACPI: EC: event unblocked [ 340.090955] sd 0:0:0:0: [sda] Starting disk [ 340.135871] tpm tpm0: A TPM error (6) occurred attempting to read a pcr value [ 340.135874] tpm tpm0: TPM is disabled/deactivated (0x6) [ 340.152298] xhci_hcd 0000:00:14.0: port 7 resume PLC timeout [ 340.167521] xhci_hcd 0000:00:14.0: port 5 resume PLC timeout [ 340.182578] xhci_hcd 0000:00:14.0: port 4 resume PLC timeout [ 340.407074] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 340.410207] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 340.410212] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 340.410216] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 340.410619] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [ 340.413793] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 340.413795] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 340.413796] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 340.414203] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [ 340.415347] ata1.00: configured for UDMA/133 [ 340.419936] usb 2-5: reset full-speed USB device number 2 using xhci_hcd [ 340.680106] usb 2-6: reset full-speed USB device number 3 using xhci_hcd [ 340.849207] psmouse serio1: synaptics: queried max coordinates: x [..5676], y [..4758] [ 340.880616] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1096..] [ 340.940174] usb 2-8: reset high-speed USB device number 5 using xhci_hcd [ 341.086827] PM: resume of devices complete after 996.804 msecs [ 341.087311] acpi LNXPOWER:02: Turning OFF [ 341.087632] PM: Finishing wakeup. [ 341.087634] OOM killer enabled. [ 341.087635] Restarting tasks ... done. [ 341.105524] thermal thermal_zone2: failed to read out thermal zone (-5) [ 341.430835] e1000e: enp0s25 NIC Link is Down [ 341.431474] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 341.616052] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 341.617336] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 341.742782] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 341.796612] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 346.162254] rfkill: input handler enabled [ 347.820177] usb 2-6: reset full-speed USB device number 3 using xhci_hcd [ 348.522059] xhci_hcd 0000:00:14.0: WARN Event TRB for slot 2 ep 4 with no TDs queued? [ 350.557889] xhci_hcd 0000:00:14.0: WARN Event TRB for slot 2 ep 4 with no TDs queued? [ 350.643092] xhci_hcd 0000:00:14.0: WARN Event TRB for slot 2 ep 4 with no TDs queued? [ 351.009118] rfkill: input handler disabled [ 452.685583] usb 2-6: USB disconnect, device number 3 [ 452.991906] usb 2-6: new full-speed USB device number 6 using xhci_hcd [ 453.132986] usb 2-6: New USB device found, idVendor=138a, idProduct=0017 [ 453.132991] usb 2-6: New USB device strings: Mfr=0, Product=0, SerialNumber=1 [ 453.132995] usb 2-6: SerialNumber: d3df8122abfc [ 563.939283] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 563.992834] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 594.666469] PM: Syncing filesystems ... done. [ 594.670337] PM: Preparing system for sleep (mem) [ 594.670725] Freezing user space processes ... (elapsed 0.021 seconds) done. [ 594.692491] OOM killer disabled. [ 594.692492] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 594.694209] PM: Suspending system (mem) [ 594.694245] Suspending console(s) (use no_console_suspend to debug) [ 594.820180] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 594.820247] sd 0:0:0:0: [sda] Stopping disk [ 595.052166] e1000e: EEE TX LPI TIMER: 00000011 [ 595.284801] PM: suspend of devices complete after 590.311 msecs [ 595.304002] PM: late suspend of devices complete after 19.192 msecs [ 595.355846] PM: noirq suspend of devices complete after 51.836 msecs [ 595.356591] ACPI: Preparing to enter system sleep state S3 [ 595.659851] ACPI: EC: event blocked [ 595.659853] ACPI: EC: EC stopped [ 595.659854] PM: Saving platform NVS memory [ 595.659881] Disabling non-boot CPUs ... [ 595.676626] IRQ 23: no longer affine to CPU1 [ 595.676635] IRQ 42: no longer affine to CPU1 [ 595.676643] IRQ 50: no longer affine to CPU1 [ 595.677671] smpboot: CPU 1 is now offline [ 595.700544] IRQ 46: no longer affine to CPU2 [ 595.701580] smpboot: CPU 2 is now offline [ 595.724361] IRQ 1: no longer affine to CPU3 [ 595.724367] IRQ 8: no longer affine to CPU3 [ 595.724371] IRQ 9: no longer affine to CPU3 [ 595.724376] IRQ 12: no longer affine to CPU3 [ 595.724390] IRQ 44: no longer affine to CPU3 [ 595.725413] smpboot: CPU 3 is now offline [ 595.727314] ACPI: Low-level resume complete [ 595.727374] ACPI: EC: EC started [ 595.727374] PM: Restoring platform NVS memory [ 595.727692] Suspended for 4787.512 seconds [ 595.729400] Enabling non-boot CPUs ... [ 595.729469] x86: Booting SMP configuration: [ 595.729470] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 595.809726] cache: parent cpu1 should not be sleeping [ 595.809886] CPU1 is up [ 595.809909] smpboot: Booting Node 0 Processor 2 APIC 0x2 [ 595.893724] cache: parent cpu2 should not be sleeping [ 595.893908] CPU2 is up [ 595.893934] smpboot: Booting Node 0 Processor 3 APIC 0x3 [ 595.973730] cache: parent cpu3 should not be sleeping [ 595.974415] CPU3 is up [ 595.980905] ACPI: Waking up from system sleep state S3 [ 596.573764] PM: noirq resume of devices complete after 51.995 msecs [ 596.575890] PM: early resume of devices complete after 2.110 msecs [ 596.576506] ACPI: EC: event unblocked [ 596.576536] sd 0:0:0:0: [sda] Starting disk [ 596.605741] tpm tpm0: A TPM error (6) occurred attempting to read a pcr value [ 596.605743] tpm tpm0: TPM is disabled/deactivated (0x6) [ 596.637386] xhci_hcd 0000:00:14.0: port 7 resume PLC timeout [ 596.652666] xhci_hcd 0000:00:14.0: port 5 resume PLC timeout [ 596.668716] xhci_hcd 0000:00:14.0: port 4 resume PLC timeout [ 596.889272] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 596.892490] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 596.892494] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 596.892497] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 596.892896] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [ 596.895342] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 596.895343] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 596.895344] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 596.895566] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [ 596.896709] ata1.00: configured for UDMA/133 [ 596.905831] usb 2-8: reset high-speed USB device number 5 using xhci_hcd [ 597.166026] usb 2-5: reset full-speed USB device number 2 using xhci_hcd [ 597.345784] psmouse serio1: synaptics: queried max coordinates: x [..5676], y [..4758] [ 597.377050] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1096..] [ 597.426038] usb 2-6: reset full-speed USB device number 6 using xhci_hcd [ 597.567989] PM: resume of devices complete after 992.092 msecs [ 597.568496] acpi LNXPOWER:02: Turning OFF [ 597.568782] PM: Finishing wakeup. [ 597.568784] OOM killer enabled. [ 597.568785] Restarting tasks ... done. [ 597.582606] thermal thermal_zone2: failed to read out thermal zone (-5) [ 597.704767] e1000e: enp0s25 NIC Link is Down [ 597.705557] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 597.890092] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 597.892345] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 598.016366] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 598.076526] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 599.190000] usb 2-6: reset full-speed USB device number 6 using xhci_hcd [ 599.892416] xhci_hcd 0000:00:14.0: WARN Event TRB for slot 5 ep 4 with no TDs queued? [ 606.550566] xhci_hcd 0000:00:14.0: WARN Event TRB for slot 5 ep 4 with no TDs queued? [ 606.635641] xhci_hcd 0000:00:14.0: WARN Event TRB for slot 5 ep 4 with no TDs queued? [ 608.466162] usb 2-6: reset full-speed USB device number 6 using xhci_hcd [ 609.182750] xhci_hcd 0000:00:14.0: WARN Event TRB for slot 5 ep 4 with no TDs queued? [ 610.531059] xhci_hcd 0000:00:14.0: WARN Event TRB for slot 5 ep 4 with no TDs queued? [ 610.611900] xhci_hcd 0000:00:14.0: WARN Event TRB for slot 5 ep 4 with no TDs queued? [ 619.894062] usb 2-6: reset full-speed USB device number 6 using xhci_hcd [ 620.595647] xhci_hcd 0000:00:14.0: WARN Event TRB for slot 5 ep 4 with no TDs queued? [ 622.525962] xhci_hcd 0000:00:14.0: WARN Event TRB for slot 5 ep 4 with no TDs queued? [ 622.608323] xhci_hcd 0000:00:14.0: WARN Event TRB for slot 5 ep 4 with no TDs queued? [ 794.030184] PM: Syncing filesystems ... done. [ 794.034205] PM: Preparing system for sleep (mem) [ 794.034587] Freezing user space processes ... (elapsed 0.002 seconds) done. [ 794.036844] OOM killer disabled. [ 794.036844] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 794.037888] PM: Suspending system (mem) [ 794.037911] Suspending console(s) (use no_console_suspend to debug) [ 794.161236] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 794.161316] sd 0:0:0:0: [sda] Stopping disk [ 794.374218] e1000e: EEE TX LPI TIMER: 00000011 [ 795.872996] PM: suspend of devices complete after 1834.922 msecs [ 795.889702] PM: late suspend of devices complete after 16.702 msecs [ 795.941728] PM: noirq suspend of devices complete after 52.019 msecs [ 795.942391] ACPI: Preparing to enter system sleep state S3 [ 796.245743] ACPI: EC: event blocked [ 796.245744] ACPI: EC: EC stopped [ 796.245745] PM: Saving platform NVS memory [ 796.245770] Disabling non-boot CPUs ... [ 796.262416] IRQ 23: no longer affine to CPU1 [ 796.262423] IRQ 42: no longer affine to CPU1 [ 796.262430] IRQ 50: no longer affine to CPU1 [ 796.263478] smpboot: CPU 1 is now offline [ 796.286430] IRQ 46: no longer affine to CPU2 [ 796.288207] smpboot: CPU 2 is now offline [ 796.310250] IRQ 1: no longer affine to CPU3 [ 796.310256] IRQ 8: no longer affine to CPU3 [ 796.310261] IRQ 9: no longer affine to CPU3 [ 796.310265] IRQ 12: no longer affine to CPU3 [ 796.310280] IRQ 44: no longer affine to CPU3 [ 796.311311] smpboot: CPU 3 is now offline [ 796.313300] ACPI: Low-level resume complete [ 796.313359] ACPI: EC: EC started [ 796.313360] PM: Restoring platform NVS memory [ 796.313678] Suspended for 2443.415 seconds [ 796.315388] Enabling non-boot CPUs ... [ 796.315439] x86: Booting SMP configuration: [ 796.315440] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 796.395626] cache: parent cpu1 should not be sleeping [ 796.395784] CPU1 is up [ 796.395832] smpboot: Booting Node 0 Processor 2 APIC 0x2 [ 796.479626] cache: parent cpu2 should not be sleeping [ 796.479810] CPU2 is up [ 796.479843] smpboot: Booting Node 0 Processor 3 APIC 0x3 [ 796.559631] cache: parent cpu3 should not be sleeping [ 796.560313] CPU3 is up [ 796.566811] ACPI: Waking up from system sleep state S3 [ 797.163658] PM: noirq resume of devices complete after 55.988 msecs [ 797.165755] PM: early resume of devices complete after 2.081 msecs [ 797.165995] ACPI: EC: event unblocked [ 797.176108] sd 0:0:0:0: [sda] Starting disk [ 797.211660] tpm tpm0: A TPM error (6) occurred attempting to read a pcr value [ 797.211663] tpm tpm0: TPM is disabled/deactivated (0x6) [ 797.227935] xhci_hcd 0000:00:14.0: port 7 resume PLC timeout [ 797.243889] xhci_hcd 0000:00:14.0: port 5 resume PLC timeout [ 797.259490] xhci_hcd 0000:00:14.0: port 4 resume PLC timeout [ 797.490496] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 797.494385] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 797.494390] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 797.494393] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 797.494797] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [ 797.495801] usb 2-5: reset full-speed USB device number 2 using xhci_hcd [ 797.500368] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 797.500373] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 797.500376] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 797.500779] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [ 797.502628] ata1.00: configured for UDMA/133 [ 797.755870] usb 2-8: reset high-speed USB device number 5 using xhci_hcd [ 797.927501] psmouse serio1: synaptics: queried max coordinates: x [..5676], y [..4758] [ 797.958929] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1096..] [ 798.015949] usb 2-6: reset full-speed USB device number 6 using xhci_hcd [ 798.157997] PM: resume of devices complete after 992.232 msecs [ 798.158492] acpi LNXPOWER:02: Turning OFF [ 798.158943] PM: Finishing wakeup. [ 798.158946] OOM killer enabled. [ 798.158947] Restarting tasks ... done. [ 798.185239] thermal thermal_zone2: failed to read out thermal zone (-5) [ 798.302696] e1000e: enp0s25 NIC Link is Down [ 798.303386] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 798.487705] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 798.488565] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 798.607177] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 798.683055] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 800.055836] usb 2-6: reset full-speed USB device number 6 using xhci_hcd [ 800.762371] xhci_hcd 0000:00:14.0: WARN Event TRB for slot 5 ep 4 with no TDs queued? [ 802.159471] xhci_hcd 0000:00:14.0: WARN Event TRB for slot 5 ep 4 with no TDs queued? [ 802.234808] xhci_hcd 0000:00:14.0: WARN Event TRB for slot 5 ep 4 with no TDs queued? [ 818.757981] usb 2-6: USB disconnect, device number 6 [ 819.055686] usb 2-6: new full-speed USB device number 7 using xhci_hcd [ 819.196855] usb 2-6: New USB device found, idVendor=138a, idProduct=0017 [ 819.196859] usb 2-6: New USB device strings: Mfr=0, Product=0, SerialNumber=1 [ 819.196862] usb 2-6: SerialNumber: d3df8122abfc [ 1673.032354] PM: Syncing filesystems ... done. [ 1673.036295] PM: Preparing system for sleep (mem) [ 1673.036691] Freezing user space processes ... (elapsed 0.002 seconds) done. [ 1673.038922] OOM killer disabled. [ 1673.038922] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 1673.040287] PM: Suspending system (mem) [ 1673.040310] Suspending console(s) (use no_console_suspend to debug) [ 1673.165054] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 1673.165137] sd 0:0:0:0: [sda] Stopping disk [ 1673.380216] e1000e: EEE TX LPI TIMER: 00000011 [ 1674.870937] PM: suspend of devices complete after 1830.474 msecs [ 1674.887656] PM: late suspend of devices complete after 16.713 msecs [ 1674.939622] PM: noirq suspend of devices complete after 51.957 msecs [ 1674.940368] ACPI: Preparing to enter system sleep state S3 [ 1675.243637] ACPI: EC: event blocked [ 1675.243638] ACPI: EC: EC stopped [ 1675.243640] PM: Saving platform NVS memory [ 1675.243667] Disabling non-boot CPUs ... [ 1675.260387] IRQ 23: no longer affine to CPU1 [ 1675.260396] IRQ 42: no longer affine to CPU1 [ 1675.260404] IRQ 50: no longer affine to CPU1 [ 1675.262193] smpboot: CPU 1 is now offline [ 1675.280318] IRQ 46: no longer affine to CPU2 [ 1675.281342] smpboot: CPU 2 is now offline [ 1675.304131] IRQ 1: no longer affine to CPU3 [ 1675.304137] IRQ 8: no longer affine to CPU3 [ 1675.304141] IRQ 9: no longer affine to CPU3 [ 1675.304146] IRQ 12: no longer affine to CPU3 [ 1675.304160] IRQ 44: no longer affine to CPU3 [ 1675.305183] smpboot: CPU 3 is now offline [ 1675.307098] ACPI: Low-level resume complete [ 1675.307158] ACPI: EC: EC started [ 1675.307158] PM: Restoring platform NVS memory [ 1675.307476] Suspended for 1434.008 seconds [ 1675.309191] Enabling non-boot CPUs ... [ 1675.309258] x86: Booting SMP configuration: [ 1675.309259] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 1675.389510] cache: parent cpu1 should not be sleeping [ 1675.389669] CPU1 is up [ 1675.389693] smpboot: Booting Node 0 Processor 2 APIC 0x2 [ 1675.473508] cache: parent cpu2 should not be sleeping [ 1675.473698] CPU2 is up [ 1675.473724] smpboot: Booting Node 0 Processor 3 APIC 0x3 [ 1675.557513] cache: parent cpu3 should not be sleeping [ 1675.558243] CPU3 is up [ 1675.565321] ACPI: Waking up from system sleep state S3 [ 1676.157541] PM: noirq resume of devices complete after 51.989 msecs [ 1676.159640] PM: early resume of devices complete after 2.082 msecs [ 1676.160101] ACPI: EC: event unblocked [ 1676.160371] sd 0:0:0:0: [sda] Starting disk [ 1676.189563] tpm tpm0: A TPM error (6) occurred attempting to read a pcr value [ 1676.189565] tpm tpm0: TPM is disabled/deactivated (0x6) [ 1676.221359] xhci_hcd 0000:00:14.0: port 7 resume PLC timeout [ 1676.237229] xhci_hcd 0000:00:14.0: port 5 resume PLC timeout [ 1676.253136] xhci_hcd 0000:00:14.0: port 4 resume PLC timeout [ 1676.472878] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1676.473738] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 1676.473740] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1676.473741] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1676.474146] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [ 1676.477314] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 1676.477316] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1676.477318] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1676.477742] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [ 1676.479628] ata1.00: configured for UDMA/133 [ 1676.489833] usb 2-5: reset full-speed USB device number 2 using xhci_hcd [ 1676.749776] usb 2-6: reset full-speed USB device number 7 using xhci_hcd [ 1676.902291] psmouse serio1: synaptics: queried max coordinates: x [..5676], y [..4758] [ 1676.933286] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1096..] [ 1677.009746] usb 2-8: reset high-speed USB device number 5 using xhci_hcd [ 1677.156354] PM: resume of devices complete after 996.709 msecs [ 1677.156674] acpi LNXPOWER:02: Turning OFF [ 1677.156974] PM: Finishing wakeup. [ 1677.156975] OOM killer enabled. [ 1677.156976] Restarting tasks ... done. [ 1677.180626] thermal thermal_zone2: failed to read out thermal zone (-5) [ 1677.300679] e1000e: enp0s25 NIC Link is Down [ 1677.301453] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 1677.485619] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 1677.486697] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 1677.610341] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 1677.674471] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 1679.101065] e1000e: enp0s25 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [ 1679.101073] e1000e 0000:00:19.0 enp0s25: 10/100 speed: disabling TSO [ 1679.101119] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready [ 1727.121935] thinkpad_acpi: EC reports that Thermal Table has changed [ 1729.793712] usb 2-6: reset full-speed USB device number 7 using xhci_hcd [ 1730.498590] xhci_hcd 0000:00:14.0: WARN Event TRB for slot 6 ep 4 with no TDs queued? [ 1732.296329] xhci_hcd 0000:00:14.0: WARN Event TRB for slot 6 ep 4 with no TDs queued? [ 1732.388907] xhci_hcd 0000:00:14.0: WARN Event TRB for slot 6 ep 4 with no TDs queued? [ 2091.403961] perf: interrupt took too long (2503 > 2500), lowering kernel.perf_event_max_sample_rate to 79750 [ 2227.325372] perf: interrupt took too long (3132 > 3128), lowering kernel.perf_event_max_sample_rate to 63750 [ 2788.230475] e1000e: enp0s25 NIC Link is Down [ 2789.622940] thinkpad_acpi: EC reports that Thermal Table has changed [ 2810.744818] PM: Syncing filesystems ... done. [ 2810.750376] PM: Preparing system for sleep (mem) [ 2810.750756] Freezing user space processes ... (elapsed 0.002 seconds) done. [ 2810.753088] OOM killer disabled. [ 2810.753089] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 2810.754402] PM: Suspending system (mem) [ 2810.754425] Suspending console(s) (use no_console_suspend to debug) [ 2810.880908] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 2810.881025] sd 0:0:0:0: [sda] Stopping disk [ 2811.094702] e1000e: EEE TX LPI TIMER: 00000011 [ 2811.309402] PM: suspend of devices complete after 554.821 msecs [ 2811.326459] PM: late suspend of devices complete after 17.048 msecs [ 2811.378310] PM: noirq suspend of devices complete after 51.842 msecs [ 2811.379055] ACPI: Preparing to enter system sleep state S3 [ 2811.682328] ACPI: EC: event blocked [ 2811.682329] ACPI: EC: EC stopped [ 2811.682330] PM: Saving platform NVS memory [ 2811.682357] Disabling non-boot CPUs ... [ 2811.699086] IRQ 23: no longer affine to CPU1 [ 2811.700119] smpboot: CPU 1 is now offline [ 2811.723017] IRQ 46: no longer affine to CPU2 [ 2811.724791] smpboot: CPU 2 is now offline [ 2811.746831] IRQ 1: no longer affine to CPU3 [ 2811.746837] IRQ 8: no longer affine to CPU3 [ 2811.746841] IRQ 9: no longer affine to CPU3 [ 2811.746846] IRQ 12: no longer affine to CPU3 [ 2811.746857] IRQ 42: no longer affine to CPU3 [ 2811.746862] IRQ 44: no longer affine to CPU3 [ 2811.746872] IRQ 50: no longer affine to CPU3 [ 2811.747895] smpboot: CPU 3 is now offline [ 2811.749897] ACPI: Low-level resume complete [ 2811.749958] ACPI: EC: EC started [ 2811.749958] PM: Restoring platform NVS memory [ 2811.750275] Suspended for 955.395 seconds [ 2811.751978] Enabling non-boot CPUs ... [ 2811.752056] x86: Booting SMP configuration: [ 2811.752057] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 2811.960198] cache: parent cpu1 should not be sleeping [ 2811.960355] CPU1 is up [ 2811.960388] smpboot: Booting Node 0 Processor 2 APIC 0x2 [ 2812.172198] cache: parent cpu2 should not be sleeping [ 2812.172384] CPU2 is up [ 2812.172406] smpboot: Booting Node 0 Processor 3 APIC 0x3 [ 2812.404206] cache: parent cpu3 should not be sleeping [ 2812.404960] CPU3 is up [ 2812.412056] ACPI: Waking up from system sleep state S3 [ 2812.764369] thinkpad_acpi: EC reports that Thermal Table has changed [ 2813.064243] PM: noirq resume of devices complete after 52.019 msecs [ 2813.066390] PM: early resume of devices complete after 2.120 msecs [ 2813.076720] sd 0:0:0:0: [sda] Starting disk [ 2813.080180] ACPI: EC: event unblocked [ 2813.131657] xhci_hcd 0000:00:14.0: port 7 resume PLC timeout [ 2813.147016] xhci_hcd 0000:00:14.0: port 5 resume PLC timeout [ 2813.162278] xhci_hcd 0000:00:14.0: port 4 resume PLC timeout [ 2813.168205] tpm tpm0: A TPM error (6) occurred attempting to read a pcr value [ 2813.168207] tpm tpm0: TPM is disabled/deactivated (0x6) [ 2813.391467] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2813.394424] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 2813.394425] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 2813.394427] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 2813.394672] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [ 2813.399100] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 2813.399102] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 2813.399103] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 2813.399334] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [ 2813.400297] usb 2-5: reset full-speed USB device number 2 using xhci_hcd [ 2813.400597] ata1.00: configured for UDMA/133 [ 2813.660518] usb 2-8: reset high-speed USB device number 5 using xhci_hcd [ 2813.887368] psmouse serio1: synaptics: queried max coordinates: x [..5676], y [..4758] [ 2813.918807] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1096..] [ 2813.920489] usb 2-6: reset full-speed USB device number 7 using xhci_hcd [ 2814.061618] PM: resume of devices complete after 995.219 msecs [ 2814.062088] acpi LNXPOWER:02: Turning OFF [ 2814.062296] PM: Finishing wakeup. [ 2814.062298] OOM killer enabled. [ 2814.062299] Restarting tasks ... done. [ 2814.085505] thermal thermal_zone2: failed to read out thermal zone (-5) [ 2814.691365] e1000e: enp0s25 NIC Link is Down [ 2814.692381] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 2814.876571] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 2814.878805] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 2814.999494] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 2815.065918] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 2823.528370] usb 2-6: reset full-speed USB device number 7 using xhci_hcd [ 2837.564444] usb 2-6: reset full-speed USB device number 7 using xhci_hcd [ 2838.269154] xhci_hcd 0000:00:14.0: WARN Event TRB for slot 6 ep 4 with no TDs queued? [ 2841.168246] xhci_hcd 0000:00:14.0: WARN Event TRB for slot 6 ep 4 with no TDs queued? [ 2841.253085] xhci_hcd 0000:00:14.0: WARN Event TRB for slot 6 ep 4 with no TDs queued? [ 2857.266370] usb 2-6: USB disconnect, device number 7 [ 2857.568366] usb 2-6: new full-speed USB device number 8 using xhci_hcd [ 2857.709730] usb 2-6: New USB device found, idVendor=138a, idProduct=0017 [ 2857.709736] usb 2-6: New USB device strings: Mfr=0, Product=0, SerialNumber=1 [ 2857.709739] usb 2-6: SerialNumber: d3df8122abfc [ 2927.777704] wlp3s0: authenticate with a0:cf:5b:c2:b4:60 [ 2927.783775] wlp3s0: send auth to a0:cf:5b:c2:b4:60 (try 1/3) [ 2927.790747] wlp3s0: authenticated [ 2927.792675] wlp3s0: associate with a0:cf:5b:c2:b4:60 (try 1/3) [ 2927.794880] wlp3s0: RX AssocResp from a0:cf:5b:c2:b4:60 (capab=0x1431 status=0 aid=3) [ 2927.802992] wlp3s0: associated [ 2927.803044] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [ 2928.000641] wlp3s0: Limiting TX power to 20 dBm as advertised by a0:cf:5b:c2:b4:60 [ 3089.856023] mmap: avahi-daemon (877): VmData 4296704 exceed data ulimit 4194304. Update limits or use boot option ignore_rlimit_data. [ 3177.873581] usb 2-6: reset full-speed USB device number 8 using xhci_hcd [ 3178.562361] xhci_hcd 0000:00:14.0: WARN Event TRB for slot 7 ep 4 with no TDs queued? [ 3181.486439] xhci_hcd 0000:00:14.0: WARN Event TRB for slot 7 ep 4 with no TDs queued? [ 3181.568665] xhci_hcd 0000:00:14.0: WARN Event TRB for slot 7 ep 4 with no TDs queued? [ 3197.576007] usb 2-6: USB disconnect, device number 8 [ 3197.873384] usb 2-6: new full-speed USB device number 9 using xhci_hcd [ 3198.015659] usb 2-6: New USB device found, idVendor=138a, idProduct=0017 [ 3198.015663] usb 2-6: New USB device strings: Mfr=0, Product=0, SerialNumber=1 [ 3198.015666] usb 2-6: SerialNumber: d3df8122abfc [ 3729.991687] perf: interrupt took too long (3965 > 3915), lowering kernel.perf_event_max_sample_rate to 50250 [ 4446.033844] usb 2-6: reset full-speed USB device number 9 using xhci_hcd [ 4446.737589] xhci_hcd 0000:00:14.0: WARN Event TRB for slot 8 ep 4 with no TDs queued? [ 4450.175116] xhci_hcd 0000:00:14.0: WARN Event TRB for slot 8 ep 4 with no TDs queued? [ 4450.265429] xhci_hcd 0000:00:14.0: WARN Event TRB for slot 8 ep 4 with no TDs queued? [ 4486.875531] perf: interrupt took too long (4989 > 4956), lowering kernel.perf_event_max_sample_rate to 40000 [ 5990.416914] wlp3s0: disconnect from AP a0:cf:5b:c2:b4:60 for new auth to a0:cf:5b:c2:b4:6f [ 5990.423195] wlp3s0: authenticate with a0:cf:5b:c2:b4:6f [ 5990.431728] wlp3s0: send auth to a0:cf:5b:c2:b4:6f (try 1/3) [ 5990.480434] wlp3s0: send auth to a0:cf:5b:c2:b4:6f (try 2/3) [ 5990.530397] wlp3s0: send auth to a0:cf:5b:c2:b4:6f (try 3/3) [ 5990.573764] wlp3s0: authentication with a0:cf:5b:c2:b4:6f timed out [ 5990.806529] wlp3s0: authenticate with a0:cf:5b:c2:b4:60 [ 5990.813404] wlp3s0: send auth to a0:cf:5b:c2:b4:60 (try 1/3) [ 5990.816188] wlp3s0: authenticated [ 5990.817912] wlp3s0: associate with a0:cf:5b:c2:b4:60 (try 1/3) [ 5990.820355] wlp3s0: RX AssocResp from a0:cf:5b:c2:b4:60 (capab=0x1431 status=0 aid=3) [ 5990.828084] wlp3s0: associated [ 5990.884745] wlp3s0: Limiting TX power to 20 dBm as advertised by a0:cf:5b:c2:b4:60 [ 7056.027504] usb 2-7: new full-speed USB device number 10 using xhci_hcd [ 7056.147579] usb 2-7: device descriptor read/64, error -71 [ 7056.375541] usb 2-7: device descriptor read/64, error -71 [ 7056.603503] usb 2-7: new full-speed USB device number 11 using xhci_hcd [ 7056.723525] usb 2-7: device descriptor read/64, error -71 [ 7056.951543] usb 2-7: device descriptor read/64, error -71 [ 7057.179514] usb 2-7: new full-speed USB device number 12 using xhci_hcd [ 7057.179628] usb 2-7: Device not responding to setup address. [ 7057.387752] usb 2-7: Device not responding to setup address. [ 7057.595582] usb 2-7: device not accepting address 12, error -71 [ 7057.715577] usb 2-7: new full-speed USB device number 13 using xhci_hcd [ 7057.715753] usb 2-7: Device not responding to setup address. [ 7057.923742] usb 2-7: Device not responding to setup address. [ 7058.131577] usb 2-7: device not accepting address 13, error -71 [ 7058.131647] usb usb2-port7: unable to enumerate USB device [ 7070.915481] usb 2-7: new full-speed USB device number 14 using xhci_hcd [ 7071.035480] usb 2-7: device descriptor read/64, error -71 [ 7071.263440] usb 2-7: device descriptor read/64, error -71 [ 7071.491458] usb 2-7: new full-speed USB device number 15 using xhci_hcd [ 7071.611448] usb 2-7: device descriptor read/64, error -71 [ 7071.839527] usb 2-7: device descriptor read/64, error -71 [ 7072.067515] usb 2-7: new full-speed USB device number 16 using xhci_hcd [ 7072.067688] usb 2-7: Device not responding to setup address. [ 7072.275568] usb 2-7: Device not responding to setup address. [ 7072.483460] usb 2-7: device not accepting address 16, error -71 [ 7072.603484] usb 2-7: new full-speed USB device number 17 using xhci_hcd [ 7072.603662] usb 2-7: Device not responding to setup address. [ 7072.811588] usb 2-7: Device not responding to setup address. [ 7073.019468] usb 2-7: device not accepting address 17, error -71 [ 7073.019537] usb usb2-port7: unable to enumerate USB device [ 7074.627438] usb 2-7: new full-speed USB device number 18 using xhci_hcd [ 7074.747425] usb 2-7: device descriptor read/64, error -71 [ 7074.975465] usb 2-7: device descriptor read/64, error -71 [ 7075.203398] usb 2-7: new full-speed USB device number 19 using xhci_hcd [ 7075.323396] usb 2-7: device descriptor read/64, error -71 [ 7075.551465] usb 2-7: device descriptor read/64, error -71 [ 7075.779433] usb 2-7: new full-speed USB device number 20 using xhci_hcd [ 7075.779596] usb 2-7: Device not responding to setup address. [ 7075.987622] usb 2-7: Device not responding to setup address. [ 7076.195415] usb 2-7: device not accepting address 20, error -71 [ 7076.315456] usb 2-7: new full-speed USB device number 21 using xhci_hcd [ 7076.315626] usb 2-7: Device not responding to setup address. [ 7076.523517] usb 2-7: Device not responding to setup address. [ 7076.731422] usb 2-7: device not accepting address 21, error -71 [ 7076.731477] usb usb2-port7: unable to enumerate USB device [ 7083.371702] usb 2-6: reset full-speed USB device number 9 using xhci_hcd [ 7084.067139] xhci_hcd 0000:00:14.0: WARN Event TRB for slot 8 ep 4 with no TDs queued? [ 7085.337462] xhci_hcd 0000:00:14.0: WARN Event TRB for slot 8 ep 4 with no TDs queued? [ 7085.422160] xhci_hcd 0000:00:14.0: WARN Event TRB for slot 8 ep 4 with no TDs queued? [ 7101.570540] usb 2-6: USB disconnect, device number 9 [ 7101.875272] usb 2-6: new full-speed USB device number 22 using xhci_hcd [ 7102.016706] usb 2-6: New USB device found, idVendor=138a, idProduct=0017 [ 7102.016711] usb 2-6: New USB device strings: Mfr=0, Product=0, SerialNumber=1 [ 7102.016714] usb 2-6: SerialNumber: d3df8122abfc [ 7434.802273] SGI XFS with ACLs, security attributes, realtime, no debug enabled [ 7434.809657] JFS: nTxBlock = 8192, nTxLock = 65536 [ 7434.823467] ntfs: driver 2.1.32 [Flags: R/O MODULE]. [ 7434.840825] QNX4 filesystem 0.2.3 registered. [ 7434.892292] raid6: sse2x1 gen() 9445 MB/s [ 7434.940289] raid6: sse2x1 xor() 6769 MB/s [ 7434.988293] raid6: sse2x2 gen() 11755 MB/s [ 7435.036291] raid6: sse2x2 xor() 7428 MB/s [ 7435.084287] raid6: sse2x4 gen() 13739 MB/s [ 7435.132285] raid6: sse2x4 xor() 8785 MB/s [ 7435.180285] raid6: avx2x1 gen() 19307 MB/s [ 7435.228285] raid6: avx2x1 xor() 12794 MB/s [ 7435.276287] raid6: avx2x2 gen() 21670 MB/s [ 7435.324285] raid6: avx2x2 xor() 13235 MB/s [ 7435.372283] raid6: avx2x4 gen() 25890 MB/s [ 7435.420265] raid6: avx2x4 xor() 16301 MB/s [ 7435.420266] raid6: using algorithm avx2x4 gen() 25890 MB/s [ 7435.420266] raid6: .... xor() 16301 MB/s, rmw enabled [ 7435.420267] raid6: using avx2x2 recovery algorithm [ 7435.421321] xor: automatically using best checksumming function avx [ 7435.434358] Btrfs loaded, crc32c=crc32c-intel [ 7992.123454] perf: interrupt took too long (6253 > 6236), lowering kernel.perf_event_max_sample_rate to 31750 [ 8377.162885] usb 2-6: reset full-speed USB device number 22 using xhci_hcd [ 8377.856860] xhci_hcd 0000:00:14.0: WARN Event TRB for slot 21 ep 4 with no TDs queued? [ 8380.170532] xhci_hcd 0000:00:14.0: WARN Event TRB for slot 21 ep 4 with no TDs queued? [ 8380.258009] xhci_hcd 0000:00:14.0: WARN Event TRB for slot 21 ep 4 with no TDs queued?