[ 0.000000] Linux version 6.5.0-26-generic (buildd@lcy02-amd64-051) (x86_64-linux-gnu-gcc-12 (Ubuntu 12.3.0-1ubuntu1~22.04) 12.3.0, GNU ld (GNU Binutils for Ubuntu) 2.38) #26~22.04.1-Ubuntu SMP PREEMPT_DYNAMIC Tue Mar 12 10:22:43 UTC 2 (Ubuntu 6.5.0-26.26~22.04.1-generic 6.5.13) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-6.5.0-26-generic root=UUID=b7747379-4fee-498f-8eba-061d7f354f27 ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Hygon HygonGenuine [ 0.000000] Centaur CentaurHauls [ 0.000000] zhaoxin Shanghai [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000009601fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000009602000-0x00000000097fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000009800000-0x000000000a1fffff] usable [ 0.000000] BIOS-e820: [mem 0x000000000a200000-0x000000000a20afff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000000a20b000-0x00000000dc9c5fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dc9c6000-0x00000000dd4a9fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dd4aa000-0x00000000dd4d6fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000dd4d7000-0x00000000dd685fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000dd686000-0x00000000ddefbfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ddefc000-0x00000000deffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000df000000-0x00000000dfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fd000000-0x00000000fdffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000019effffff] usable [ 0.000000] BIOS-e820: [mem 0x000000019f000000-0x000000021effffff] reserved [ 0.000000] BIOS-e820: [mem 0x000000021f000000-0x000000021f33ffff] usable [ 0.000000] BIOS-e820: [mem 0x000000021f340000-0x000000021fffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] e820: update [mem 0xd988f018-0xd989c457] usable ==> usable [ 0.000000] e820: update [mem 0xd988f018-0xd989c457] usable ==> usable [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable [ 0.000000] reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000009601fff] usable [ 0.000000] reserve setup_data: [mem 0x0000000009602000-0x00000000097fffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000009800000-0x000000000a1fffff] usable [ 0.000000] reserve setup_data: [mem 0x000000000a200000-0x000000000a20afff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x000000000a20b000-0x00000000d988f017] usable [ 0.000000] reserve setup_data: [mem 0x00000000d988f018-0x00000000d989c457] usable [ 0.000000] reserve setup_data: [mem 0x00000000d989c458-0x00000000dc9c5fff] usable [ 0.000000] reserve setup_data: [mem 0x00000000dc9c6000-0x00000000dd4a9fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000dd4aa000-0x00000000dd4d6fff] ACPI data [ 0.000000] reserve setup_data: [mem 0x00000000dd4d7000-0x00000000dd685fff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x00000000dd686000-0x00000000ddefbfff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000ddefc000-0x00000000deffffff] usable [ 0.000000] reserve setup_data: [mem 0x00000000df000000-0x00000000dfffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fd000000-0x00000000fdffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000feb80000-0x00000000fec01fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fec10000-0x00000000fec10fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed40000-0x00000000fed44fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000019effffff] usable [ 0.000000] reserve setup_data: [mem 0x000000019f000000-0x000000021effffff] reserved [ 0.000000] reserve setup_data: [mem 0x000000021f000000-0x000000021f33ffff] usable [ 0.000000] reserve setup_data: [mem 0x000000021f340000-0x000000021fffffff] reserved [ 0.000000] efi: EFI v2.7 by American Megatrends [ 0.000000] efi: TPMFinalLog=0xdd63e000 ACPI 2.0=0xdd4b3000 ACPI=0xdd4b3000 SMBIOS=0xddd0b000 SMBIOS 3.0=0xddd0a000 ESRT=0xdbbee118 MOKvar=0xddd24000 RNG=0xdd4b2018 TPMEventLog=0xd989d018 [ 0.000000] random: crng init done [ 0.000000] efi: Remove mem235: MMIO range=[0xf8000000-0xfbffffff] (64MB) from e820 map [ 0.000000] e820: remove [mem 0xf8000000-0xfbffffff] reserved [ 0.000000] efi: Remove mem236: MMIO range=[0xfd000000-0xfdffffff] (16MB) from e820 map [ 0.000000] e820: remove [mem 0xfd000000-0xfdffffff] reserved [ 0.000000] efi: Remove mem237: MMIO range=[0xfeb80000-0xfec01fff] (0MB) from e820 map [ 0.000000] e820: remove [mem 0xfeb80000-0xfec01fff] reserved [ 0.000000] efi: Not removing mem238: MMIO range=[0xfec10000-0xfec10fff] (4KB) from e820 map [ 0.000000] efi: Not removing mem239: MMIO range=[0xfed00000-0xfed00fff] (4KB) from e820 map [ 0.000000] efi: Not removing mem240: MMIO range=[0xfed40000-0xfed44fff] (20KB) from e820 map [ 0.000000] efi: Not removing mem241: MMIO range=[0xfed80000-0xfed8ffff] (64KB) from e820 map [ 0.000000] efi: Not removing mem242: MMIO range=[0xfedc2000-0xfedcffff] (56KB) from e820 map [ 0.000000] efi: Not removing mem243: MMIO range=[0xfedd4000-0xfedd5fff] (8KB) from e820 map [ 0.000000] efi: Remove mem244: MMIO range=[0xfee00000-0xfeefffff] (1MB) from e820 map [ 0.000000] e820: remove [mem 0xfee00000-0xfeefffff] reserved [ 0.000000] efi: Remove mem245: MMIO range=[0xff000000-0xffffffff] (16MB) from e820 map [ 0.000000] e820: remove [mem 0xff000000-0xffffffff] reserved [ 0.000000] secureboot: Secure boot enabled [ 0.000000] Kernel is locked down from EFI Secure Boot mode; see man kernel_lockdown.7 [ 0.000000] SMBIOS 3.2.1 present. [ 0.000000] DMI: ASUSTeK COMPUTER INC. VivoBook_ASUSLaptop X512DA_X512DA/X512DA, BIOS X512DA.310 12/24/2019 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2095.990 MHz processor [ 0.000224] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000227] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000237] last_pfn = 0x21f340 max_arch_pfn = 0x400000000 [ 0.000245] MTRR map: 5 entries (3 fixed + 2 variable; max 20), built from 9 variable MTRRs [ 0.000248] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000599] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved [ 0.000609] last_pfn = 0xdf000 max_arch_pfn = 0x400000000 [ 0.005000] esrt: Reserving ESRT space from 0x00000000dbbee118 to 0x00000000dbbee150. [ 0.005008] e820: update [mem 0xdbbee000-0xdbbeefff] usable ==> reserved [ 0.005046] Using GB pages for direct mapping [ 0.005718] secureboot: Secure boot enabled [ 0.005719] RAMDISK: [mem 0xd4f2c000-0xd921efff] [ 0.005726] ACPI: Early table checksum verification disabled [ 0.005730] ACPI: RSDP 0x00000000DD4B3000 000024 (v02 _ASUS_) [ 0.005734] ACPI: XSDT 0x00000000DD4B30A8 0000D4 (v01 _ASUS_ Notebook 01072009 AMI 00010013) [ 0.005741] ACPI: FACP 0x00000000DD4BE430 000114 (v06 _ASUS_ Notebook 01072009 AMI 00010013) [ 0.005746] ACPI: DSDT 0x00000000DD4B3210 00B21B (v02 _ASUS_ Notebook 01072009 INTL 20120913) [ 0.005750] ACPI: FACS 0x00000000DD63DD80 000040 [ 0.005753] ACPI: APIC 0x00000000DD4BE548 0000DE (v03 _ASUS_ Notebook 01072009 AMI 00010013) [ 0.005757] ACPI: FPDT 0x00000000DD4BE628 000044 (v01 _ASUS_ Notebook 01072009 AMI 00010013) [ 0.005760] ACPI: FIDT 0x00000000DD4BE670 00009C (v01 _ASUS_ Notebook 01072009 AMI 00010013) [ 0.005763] ACPI: ECDT 0x00000000DD4BE710 0000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005) [ 0.005767] ACPI: SSDT 0x00000000DD4BE7D8 005419 (v02 AMD AmdTable 00000002 MSFT 02000002) [ 0.005770] ACPI: MCFG 0x00000000DD4C3BF8 00003C (v01 _ASUS_ Notebook 01072009 MSFT 00010013) [ 0.005773] ACPI: MSDM 0x00000000DD4C3C38 000055 (v03 _ASUS_ Notebook 01072009 ASUS 00000001) [ 0.005777] ACPI: HPET 0x00000000DD4C3C90 000038 (v01 _ASUS_ Notebook 01072009 AMI 00000005) [ 0.005780] ACPI: UEFI 0x00000000DD4C3CC8 000042 (v01 _ASUS_ Notebook 00000002 01000013) [ 0.005783] ACPI: VFCT 0x00000000DD4C3D10 00D484 (v01 _ASUS_ Notebook 00000001 AMD 31504F47) [ 0.005786] ACPI: BGRT 0x00000000DD4D1198 000038 (v01 _ASUS_ Notebook 01072009 AMI 00010013) [ 0.005790] ACPI: TPM2 0x00000000DD4D11D0 000038 (v04 _ASUS_ Notebook 00000001 AMI 00000000) [ 0.005793] ACPI: IVRS 0x00000000DD4D1208 00013E (v02 AMD AMD IVRS 00000001 AMD 00000000) [ 0.005797] ACPI: SSDT 0x00000000DD4D1348 00119C (v01 AMD AMD CPU 00000001 AMD 00000001) [ 0.005800] ACPI: CRAT 0x00000000DD4D24E8 000810 (v01 AMD AMD CRAT 00000001 AMD 00000001) [ 0.005803] ACPI: CDIT 0x00000000DD4D2CF8 000029 (v01 AMD AMD CDIT 00000001 AMD 00000001) [ 0.005807] ACPI: SSDT 0x00000000DD4D2D28 000C33 (v01 AMD AmdTable 00000001 INTL 20120913) [ 0.005810] ACPI: SSDT 0x00000000DD4D3960 0010AC (v01 AMD AmdTable 00000001 INTL 20120913) [ 0.005813] ACPI: SSDT 0x00000000DD4D4A10 0002EA (v01 AMD AmdTable 00000001 INTL 20120913) [ 0.005816] ACPI: SSDT 0x00000000DD4D4D00 001C69 (v01 AMD AmdTable 00000001 INTL 20120913) [ 0.005820] ACPI: WSMT 0x00000000DD4D6970 000028 (v01 _ASUS_ Notebook 01072009 AMI 00010013) [ 0.005822] ACPI: Reserving FACP table memory at [mem 0xdd4be430-0xdd4be543] [ 0.005824] ACPI: Reserving DSDT table memory at [mem 0xdd4b3210-0xdd4be42a] [ 0.005825] ACPI: Reserving FACS table memory at [mem 0xdd63dd80-0xdd63ddbf] [ 0.005826] ACPI: Reserving APIC table memory at [mem 0xdd4be548-0xdd4be625] [ 0.005827] ACPI: Reserving FPDT table memory at [mem 0xdd4be628-0xdd4be66b] [ 0.005828] ACPI: Reserving FIDT table memory at [mem 0xdd4be670-0xdd4be70b] [ 0.005829] ACPI: Reserving ECDT table memory at [mem 0xdd4be710-0xdd4be7d0] [ 0.005829] ACPI: Reserving SSDT table memory at [mem 0xdd4be7d8-0xdd4c3bf0] [ 0.005830] ACPI: Reserving MCFG table memory at [mem 0xdd4c3bf8-0xdd4c3c33] [ 0.005831] ACPI: Reserving MSDM table memory at [mem 0xdd4c3c38-0xdd4c3c8c] [ 0.005832] ACPI: Reserving HPET table memory at [mem 0xdd4c3c90-0xdd4c3cc7] [ 0.005833] ACPI: Reserving UEFI table memory at [mem 0xdd4c3cc8-0xdd4c3d09] [ 0.005834] ACPI: Reserving VFCT table memory at [mem 0xdd4c3d10-0xdd4d1193] [ 0.005835] ACPI: Reserving BGRT table memory at [mem 0xdd4d1198-0xdd4d11cf] [ 0.005836] ACPI: Reserving TPM2 table memory at [mem 0xdd4d11d0-0xdd4d1207] [ 0.005837] ACPI: Reserving IVRS table memory at [mem 0xdd4d1208-0xdd4d1345] [ 0.005837] ACPI: Reserving SSDT table memory at [mem 0xdd4d1348-0xdd4d24e3] [ 0.005838] ACPI: Reserving CRAT table memory at [mem 0xdd4d24e8-0xdd4d2cf7] [ 0.005839] ACPI: Reserving CDIT table memory at [mem 0xdd4d2cf8-0xdd4d2d20] [ 0.005840] ACPI: Reserving SSDT table memory at [mem 0xdd4d2d28-0xdd4d395a] [ 0.005841] ACPI: Reserving SSDT table memory at [mem 0xdd4d3960-0xdd4d4a0b] [ 0.005842] ACPI: Reserving SSDT table memory at [mem 0xdd4d4a10-0xdd4d4cf9] [ 0.005843] ACPI: Reserving SSDT table memory at [mem 0xdd4d4d00-0xdd4d6968] [ 0.005844] ACPI: Reserving WSMT table memory at [mem 0xdd4d6970-0xdd4d6997] [ 0.006023] No NUMA configuration found [ 0.006025] Faking a node at [mem 0x0000000000000000-0x000000021f33ffff] [ 0.006034] NODE_DATA(0) allocated [mem 0x21f315000-0x21f33ffff] [ 0.006209] Zone ranges: [ 0.006209] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.006211] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.006213] Normal [mem 0x0000000100000000-0x000000021f33ffff] [ 0.006215] Device empty [ 0.006216] Movable zone start for each node [ 0.006219] Early memory node ranges [ 0.006219] node 0: [mem 0x0000000000001000-0x000000000009ffff] [ 0.006221] node 0: [mem 0x0000000000100000-0x0000000009601fff] [ 0.006222] node 0: [mem 0x0000000009800000-0x000000000a1fffff] [ 0.006223] node 0: [mem 0x000000000a20b000-0x00000000dc9c5fff] [ 0.006224] node 0: [mem 0x00000000ddefc000-0x00000000deffffff] [ 0.006225] node 0: [mem 0x0000000100000000-0x000000019effffff] [ 0.006226] node 0: [mem 0x000000021f000000-0x000000021f33ffff] [ 0.006227] Initmem setup node 0 [mem 0x0000000000001000-0x000000021f33ffff] [ 0.006232] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.006250] On node 0, zone DMA: 96 pages in unavailable ranges [ 0.006408] On node 0, zone DMA32: 510 pages in unavailable ranges [ 0.014462] On node 0, zone DMA32: 11 pages in unavailable ranges [ 0.014567] On node 0, zone DMA32: 5430 pages in unavailable ranges [ 0.020845] On node 0, zone Normal: 4096 pages in unavailable ranges [ 0.021213] On node 0, zone Normal: 32768 pages in unavailable ranges [ 0.021249] On node 0, zone Normal: 3264 pages in unavailable ranges [ 0.021441] ACPI: PM-Timer IO Port: 0x808 [ 0.021452] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.021468] IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23 [ 0.021476] IOAPIC[1]: apic_id 10, version 33, address 0xfec01000, GSI 24-55 [ 0.021478] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.021480] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.021484] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.021485] ACPI: HPET id: 0x10228201 base: 0xfed00000 [ 0.021498] e820: update [mem 0xdb671000-0xdb69ffff] usable ==> reserved [ 0.021514] smpboot: Allowing 16 CPUs, 8 hotplug CPUs [ 0.021538] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.021540] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.021542] PM: hibernation: Registered nosave memory: [mem 0x09602000-0x097fffff] [ 0.021544] PM: hibernation: Registered nosave memory: [mem 0x0a200000-0x0a20afff] [ 0.021546] PM: hibernation: Registered nosave memory: [mem 0xd988f000-0xd988ffff] [ 0.021547] PM: hibernation: Registered nosave memory: [mem 0xd989c000-0xd989cfff] [ 0.021549] PM: hibernation: Registered nosave memory: [mem 0xdb671000-0xdb69ffff] [ 0.021551] PM: hibernation: Registered nosave memory: [mem 0xdbbee000-0xdbbeefff] [ 0.021553] PM: hibernation: Registered nosave memory: [mem 0xdc9c6000-0xdd4a9fff] [ 0.021553] PM: hibernation: Registered nosave memory: [mem 0xdd4aa000-0xdd4d6fff] [ 0.021554] PM: hibernation: Registered nosave memory: [mem 0xdd4d7000-0xdd685fff] [ 0.021555] PM: hibernation: Registered nosave memory: [mem 0xdd686000-0xddefbfff] [ 0.021557] PM: hibernation: Registered nosave memory: [mem 0xdf000000-0xdfffffff] [ 0.021558] PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xfec0ffff] [ 0.021558] PM: hibernation: Registered nosave memory: [mem 0xfec10000-0xfec10fff] [ 0.021559] PM: hibernation: Registered nosave memory: [mem 0xfec11000-0xfecfffff] [ 0.021560] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff] [ 0.021561] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed3ffff] [ 0.021562] PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfed44fff] [ 0.021562] PM: hibernation: Registered nosave memory: [mem 0xfed45000-0xfed7ffff] [ 0.021563] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfed8ffff] [ 0.021564] PM: hibernation: Registered nosave memory: [mem 0xfed90000-0xfedc1fff] [ 0.021565] PM: hibernation: Registered nosave memory: [mem 0xfedc2000-0xfedcffff] [ 0.021566] PM: hibernation: Registered nosave memory: [mem 0xfedd0000-0xfedd3fff] [ 0.021566] PM: hibernation: Registered nosave memory: [mem 0xfedd4000-0xfedd5fff] [ 0.021567] PM: hibernation: Registered nosave memory: [mem 0xfedd6000-0xffffffff] [ 0.021569] PM: hibernation: Registered nosave memory: [mem 0x19f000000-0x21effffff] [ 0.021571] [mem 0xe0000000-0xfec0ffff] available for PCI devices [ 0.021572] Booting paravirtualized kernel on bare hardware [ 0.021575] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.021584] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1 [ 0.022450] percpu: Embedded 63 pages/cpu s221184 r8192 d28672 u262144 [ 0.022461] pcpu-alloc: s221184 r8192 d28672 u262144 alloc=1*2097152 [ 0.022464] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 [ 0.022497] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.5.0-26-generic root=UUID=b7747379-4fee-498f-8eba-061d7f354f27 ro quiet splash vt.handoff=7 [ 0.022588] Unknown kernel command line parameters "splash BOOT_IMAGE=/boot/vmlinuz-6.5.0-26-generic", will be passed to user space. [ 0.023850] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.024470] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.024603] Fallback order for Node 0: 0 [ 0.024610] Built 1 zonelists, mobility grouping on. Total pages: 1534928 [ 0.024612] Policy zone: Normal [ 0.024620] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.024671] software IO TLB: area num 16. [ 0.059116] Memory: 5855772K/6237824K available (20480K kernel code, 4266K rwdata, 13188K rodata, 4808K init, 17380K bss, 381792K reserved, 0K cma-reserved) [ 0.059354] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1 [ 0.059391] ftrace: allocating 55231 entries in 216 pages [ 0.069780] ftrace: allocated 216 pages with 4 groups [ 0.070681] Dynamic Preempt: voluntary [ 0.070727] rcu: Preemptible hierarchical RCU implementation. [ 0.070728] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=16. [ 0.070729] Trampoline variant of Tasks RCU enabled. [ 0.070730] Rude variant of Tasks RCU enabled. [ 0.070730] Tracing variant of Tasks RCU enabled. [ 0.070731] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.070732] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16 [ 0.073363] NR_IRQS: 524544, nr_irqs: 1096, preallocated irqs: 16 [ 0.073581] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.073669] Console: colour dummy device 80x25 [ 0.073672] printk: console [tty0] enabled [ 0.073720] ACPI: Core revision 20230331 [ 0.073879] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns [ 0.073903] APIC: Switch to symmetric I/O mode setup [ 0.074971] AMD-Vi: ivrs, add hid:PNPD0040, uid:, rdevid:152 [ 0.074973] AMD-Vi: Using global IVHD EFR:0x4f77ef22294ada, EFR2:0x0 [ 0.075343] Switched APIC routing to physical flat. [ 0.076182] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.093910] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1e36648e78c, max_idle_ns: 440795296890 ns [ 0.093921] Calibrating delay loop (skipped), value calculated using timer frequency.. 4191.98 BogoMIPS (lpj=8383960) [ 0.093944] AMD Zen1 DIV0 bug detected. Disable SMT for full protection. [ 0.093993] LVT offset 1 assigned for vector 0xf9 [ 0.094073] LVT offset 2 assigned for vector 0xf4 [ 0.094095] process: using mwait in idle threads [ 0.094099] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512 [ 0.094100] Last level dTLB entries: 4KB 1536, 2MB 1536, 4MB 768, 1GB 0 [ 0.094105] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.094108] Spectre V2 : Mitigation: Retpolines [ 0.094108] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.094109] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.094110] Spectre V2 : Enabling Speculation Barrier for firmware calls [ 0.094111] RETBleed: Mitigation: untrained return thunk [ 0.094114] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.094115] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.094117] Speculative Return Stack Overflow: IBPB-extending microcode not applied! [ 0.094119] Speculative Return Stack Overflow: WARNING: See https://kernel.org/doc/html/latest/admin-guide/hw-vuln/srso.html for mitigation options. [ 0.094120] Speculative Return Stack Overflow: Mitigation: Safe RET [ 0.094127] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.094128] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.094129] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.094131] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.094132] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format. [ 0.122042] Freeing SMP alternatives memory: 44K [ 0.122048] pid_max: default: 32768 minimum: 301 [ 0.126775] LSM: initializing lsm=lockdown,capability,landlock,yama,apparmor,integrity [ 0.126800] landlock: Up and running. [ 0.126801] Yama: becoming mindful. [ 0.126834] AppArmor: AppArmor initialized [ 0.126896] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.126912] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.240378] smpboot: CPU0: AMD Ryzen 5 3500U with Radeon Vega Mobile Gfx (family: 0x17, model: 0x18, stepping: 0x1) [ 0.240595] RCU Tasks: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1. [ 0.240618] RCU Tasks Rude: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1. [ 0.240640] RCU Tasks Trace: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1. [ 0.240660] Performance Events: Fam17h+ core perfctr, AMD PMU driver. [ 0.240669] ... version: 0 [ 0.240671] ... bit width: 48 [ 0.240673] ... generic registers: 6 [ 0.240674] ... value mask: 0000ffffffffffff [ 0.240675] ... max period: 00007fffffffffff [ 0.240677] ... fixed-purpose events: 0 [ 0.240678] ... event mask: 000000000000003f [ 0.240801] signal: max sigframe size: 1776 [ 0.240839] rcu: Hierarchical SRCU implementation. [ 0.240841] rcu: Max phase no-delay instances is 1000. [ 0.242560] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.242746] smp: Bringing up secondary CPUs ... [ 0.242888] smpboot: x86: Booting SMP configuration: [ 0.242890] .... node #0, CPUs: #2 #4 #6 #1 #3 #5 #7 [ 0.257953] smp: Brought up 1 node, 8 CPUs [ 0.257953] smpboot: Max logical packages: 2 [ 0.257953] smpboot: Total of 8 processors activated (33535.84 BogoMIPS) [ 0.259230] devtmpfs: initialized [ 0.259230] x86/mm: Memory block size: 128MB [ 0.263402] ACPI: PM: Registering ACPI NVS region [mem 0x0a200000-0x0a20afff] (45056 bytes) [ 0.263402] ACPI: PM: Registering ACPI NVS region [mem 0xdd4d7000-0xdd685fff] (1765376 bytes) [ 0.263402] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.263402] futex hash table entries: 4096 (order: 6, 262144 bytes, linear) [ 0.263402] pinctrl core: initialized pinctrl subsystem [ 0.263402] PM: RTC time: 15:27:21, date: 2024-04-15 [ 0.263402] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.263490] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.263631] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.263793] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.263813] audit: initializing netlink subsys (disabled) [ 0.263835] audit: type=2000 audit(1713194841.188:1): state=initialized audit_enabled=0 res=1 [ 0.263835] thermal_sys: Registered thermal governor 'fair_share' [ 0.263835] thermal_sys: Registered thermal governor 'bang_bang' [ 0.263835] thermal_sys: Registered thermal governor 'step_wise' [ 0.263835] thermal_sys: Registered thermal governor 'user_space' [ 0.263835] thermal_sys: Registered thermal governor 'power_allocator' [ 0.263835] EISA bus registered [ 0.263835] cpuidle: using governor ladder [ 0.263835] cpuidle: using governor menu [ 0.263835] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.263835] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.266053] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.266061] PCI: not using MMCONFIG [ 0.266063] PCI: Using configuration type 1 for base access [ 0.266065] PCI: Using configuration type 1 for extended access [ 0.266668] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.266678] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.266678] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 0.266678] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.266678] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 0.266678] ACPI: Added _OSI(Module Device) [ 0.266678] ACPI: Added _OSI(Processor Device) [ 0.266678] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.266678] ACPI: Added _OSI(Processor Aggregator Device) [ 0.297188] ACPI: 7 ACPI AML tables successfully acquired and loaded [ 0.299108] ACPI: EC: EC started [ 0.299110] ACPI: EC: interrupt blocked [ 0.299990] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.299992] ACPI: EC: Boot ECDT EC used to handle transactions [ 0.301498] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.307034] ACPI: Interpreter enabled [ 0.307034] ACPI: PM: (supports S0 S3 S4 S5) [ 0.307034] ACPI: Using IOAPIC for interrupt routing [ 0.309976] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.310066] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved as ACPI motherboard resource [ 0.310081] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.310083] PCI: Using E820 reservations for host bridge windows [ 0.310726] ACPI: Enabled 2 GPEs in block 00 to 1F [ 0.329094] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.329103] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] [ 0.329319] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR DPC] [ 0.329716] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 0.329719] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.329736] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ 0.330612] PCI host bridge to bus 0000:00 [ 0.330615] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 0.330619] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 0.330622] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 0.330625] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.330628] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window] [ 0.330631] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfebfffff window] [ 0.330634] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window] [ 0.330637] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.330660] pci 0000:00:00.0: [1022:15d0] type 00 class 0x060000 [ 0.330836] pci 0000:00:00.2: [1022:15d1] type 00 class 0x080600 [ 0.331006] pci 0000:00:01.0: [1022:1452] type 00 class 0x060000 [ 0.331115] pci 0000:00:01.2: [1022:15d3] type 01 class 0x060400 [ 0.331152] pci 0000:00:01.2: enabling Extended Tags [ 0.331213] pci 0000:00:01.2: PME# supported from D0 D3hot D3cold [ 0.331403] pci 0000:00:01.3: [1022:15d3] type 01 class 0x060400 [ 0.331495] pci 0000:00:01.3: PME# supported from D0 D3hot D3cold [ 0.331706] pci 0000:00:08.0: [1022:1452] type 00 class 0x060000 [ 0.331814] pci 0000:00:08.1: [1022:15db] type 01 class 0x060400 [ 0.331852] pci 0000:00:08.1: enabling Extended Tags [ 0.331904] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold [ 0.332123] pci 0000:00:08.2: [1022:15dc] type 01 class 0x060400 [ 0.332161] pci 0000:00:08.2: enabling Extended Tags [ 0.332215] pci 0000:00:08.2: PME# supported from D0 D3hot D3cold [ 0.332432] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500 [ 0.332628] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100 [ 0.332838] pci 0000:00:18.0: [1022:15e8] type 00 class 0x060000 [ 0.332902] pci 0000:00:18.1: [1022:15e9] type 00 class 0x060000 [ 0.332966] pci 0000:00:18.2: [1022:15ea] type 00 class 0x060000 [ 0.333031] pci 0000:00:18.3: [1022:15eb] type 00 class 0x060000 [ 0.333093] pci 0000:00:18.4: [1022:15ec] type 00 class 0x060000 [ 0.333156] pci 0000:00:18.5: [1022:15ed] type 00 class 0x060000 [ 0.333218] pci 0000:00:18.6: [1022:15ee] type 00 class 0x060000 [ 0.333284] pci 0000:00:18.7: [1022:15ef] type 00 class 0x060000 [ 0.333822] pci 0000:01:00.0: [168c:0042] type 00 class 0x028000 [ 0.334020] pci 0000:01:00.0: reg 0x10: [mem 0xfe200000-0xfe3fffff 64bit] [ 0.335049] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.336552] pci 0000:00:01.2: PCI bridge to [bus 01] [ 0.336560] pci 0000:00:01.2: bridge window [mem 0xfe200000-0xfe3fffff] [ 0.336639] pci 0000:02:00.0: [2646:500c] type 00 class 0x010802 [ 0.336659] pci 0000:02:00.0: reg 0x10: [mem 0xfe900000-0xfe903fff 64bit] [ 0.336930] pci 0000:00:01.3: PCI bridge to [bus 02] [ 0.336937] pci 0000:00:01.3: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.337107] pci 0000:03:00.0: [1002:15d8] type 00 class 0x030000 [ 0.337128] pci 0000:03:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.337142] pci 0000:03:00.0: reg 0x18: [mem 0xf0000000-0xf01fffff 64bit pref] [ 0.337152] pci 0000:03:00.0: reg 0x20: [io 0xf000-0xf0ff] [ 0.337162] pci 0000:03:00.0: reg 0x24: [mem 0xfe700000-0xfe77ffff] [ 0.337177] pci 0000:03:00.0: enabling Extended Tags [ 0.337200] pci 0000:03:00.0: BAR 0: assigned to efifb [ 0.337267] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.337488] pci 0000:03:00.1: [1002:15de] type 00 class 0x040300 [ 0.337502] pci 0000:03:00.1: reg 0x10: [mem 0xfe7c8000-0xfe7cbfff] [ 0.337539] pci 0000:03:00.1: enabling Extended Tags [ 0.337592] pci 0000:03:00.1: PME# supported from D1 D2 D3hot D3cold [ 0.337733] pci 0000:03:00.2: [1022:15df] type 00 class 0x108000 [ 0.337757] pci 0000:03:00.2: reg 0x18: [mem 0xfe600000-0xfe6fffff] [ 0.337774] pci 0000:03:00.2: reg 0x24: [mem 0xfe7cc000-0xfe7cdfff] [ 0.337787] pci 0000:03:00.2: enabling Extended Tags [ 0.337985] pci 0000:03:00.3: [1022:15e0] type 00 class 0x0c0330 [ 0.338004] pci 0000:03:00.3: reg 0x10: [mem 0xfe500000-0xfe5fffff 64bit] [ 0.338047] pci 0000:03:00.3: enabling Extended Tags [ 0.338103] pci 0000:03:00.3: PME# supported from D0 D3hot D3cold [ 0.338273] pci 0000:03:00.4: [1022:15e1] type 00 class 0x0c0330 [ 0.338292] pci 0000:03:00.4: reg 0x10: [mem 0xfe400000-0xfe4fffff 64bit] [ 0.338334] pci 0000:03:00.4: enabling Extended Tags [ 0.338390] pci 0000:03:00.4: PME# supported from D0 D3hot D3cold [ 0.338548] pci 0000:03:00.5: [1022:15e2] type 00 class 0x048000 [ 0.338562] pci 0000:03:00.5: reg 0x10: [mem 0xfe780000-0xfe7bffff] [ 0.338599] pci 0000:03:00.5: enabling Extended Tags [ 0.338651] pci 0000:03:00.5: PME# supported from D0 D3hot D3cold [ 0.338789] pci 0000:03:00.6: [1022:15e3] type 00 class 0x040300 [ 0.338803] pci 0000:03:00.6: reg 0x10: [mem 0xfe7c0000-0xfe7c7fff] [ 0.338840] pci 0000:03:00.6: enabling Extended Tags [ 0.338892] pci 0000:03:00.6: PME# supported from D0 D3hot D3cold [ 0.339049] pci 0000:00:08.1: PCI bridge to [bus 03] [ 0.339055] pci 0000:00:08.1: bridge window [io 0xf000-0xffff] [ 0.339060] pci 0000:00:08.1: bridge window [mem 0xfe400000-0xfe7fffff] [ 0.339065] pci 0000:00:08.1: bridge window [mem 0xe0000000-0xf01fffff 64bit pref] [ 0.339172] pci 0000:04:00.0: [1022:7901] type 00 class 0x010601 [ 0.339209] pci 0000:04:00.0: reg 0x24: [mem 0xfe800000-0xfe8007ff] [ 0.339223] pci 0000:04:00.0: enabling Extended Tags [ 0.339289] pci 0000:04:00.0: PME# supported from D3hot D3cold [ 0.339483] pci 0000:00:08.2: PCI bridge to [bus 04] [ 0.339491] pci 0000:00:08.2: bridge window [mem 0xfe800000-0xfe8fffff] [ 0.340572] ACPI: PCI: Interrupt link LNKA configured for IRQ 0 [ 0.340692] ACPI: PCI: Interrupt link LNKB configured for IRQ 0 [ 0.340801] ACPI: PCI: Interrupt link LNKC configured for IRQ 0 [ 0.340930] ACPI: PCI: Interrupt link LNKD configured for IRQ 0 [ 0.341049] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.341152] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.341256] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.341359] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.343321] ACPI: EC: interrupt unblocked [ 0.343324] ACPI: EC: event unblocked [ 0.343328] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.343330] ACPI: EC: GPE=0x3 [ 0.343332] ACPI: \_SB_.PCI0.SBRG.EC0_: Boot ECDT EC initialization complete [ 0.343335] ACPI: \_SB_.PCI0.SBRG.EC0_: EC: Used to handle transactions and events [ 0.343425] iommu: Default domain type: Translated [ 0.343425] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.343425] SCSI subsystem initialized [ 0.343425] libata version 3.00 loaded. [ 0.343425] ACPI: bus type USB registered [ 0.343425] usbcore: registered new interface driver usbfs [ 0.343425] usbcore: registered new interface driver hub [ 0.343425] usbcore: registered new device driver usb [ 0.347897] pps_core: LinuxPPS API ver. 1 registered [ 0.347900] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.347905] PTP clock support registered [ 0.347928] EDAC MC: Ver: 3.0.0 [ 0.347928] efivars: Registered efivars operations [ 0.347928] NetLabel: Initializing [ 0.347928] NetLabel: domain hash size = 128 [ 0.347928] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.347928] NetLabel: unlabeled traffic allowed by default [ 0.347928] mctp: management component transport protocol core [ 0.347928] NET: Registered PF_MCTP protocol family [ 0.347928] PCI: Using ACPI for IRQ routing [ 0.351548] PCI: pci_cache_line_size set to 64 bytes [ 0.351778] e820: reserve RAM buffer [mem 0x09602000-0x0bffffff] [ 0.351781] e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff] [ 0.351783] e820: reserve RAM buffer [mem 0xd988f018-0xdbffffff] [ 0.351786] e820: reserve RAM buffer [mem 0xdb671000-0xdbffffff] [ 0.351788] e820: reserve RAM buffer [mem 0xdbbee000-0xdbffffff] [ 0.351790] e820: reserve RAM buffer [mem 0xdc9c6000-0xdfffffff] [ 0.351792] e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff] [ 0.351794] e820: reserve RAM buffer [mem 0x19f000000-0x19fffffff] [ 0.351796] e820: reserve RAM buffer [mem 0x21f340000-0x21fffffff] [ 0.351885] pci 0000:03:00.0: vgaarb: setting as boot VGA device [ 0.351885] pci 0000:03:00.0: vgaarb: bridge control possible [ 0.351885] pci 0000:03:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none [ 0.351885] vgaarb: loaded [ 0.351885] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.351885] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.353980] clocksource: Switched to clocksource tsc-early [ 0.354211] VFS: Disk quotas dquot_6.6.0 [ 0.354230] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.354459] AppArmor: AppArmor Filesystem Enabled [ 0.354501] pnp: PnP ACPI init [ 0.354657] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.355483] system 00:03: [io 0x04d0-0x04d1] has been reserved [ 0.355487] system 00:03: [io 0x040b] has been reserved [ 0.355490] system 00:03: [io 0x04d6] has been reserved [ 0.355493] system 00:03: [io 0x0c00-0x0c01] has been reserved [ 0.355496] system 00:03: [io 0x0c14] has been reserved [ 0.355499] system 00:03: [io 0x0c50-0x0c51] has been reserved [ 0.355502] system 00:03: [io 0x0c52] has been reserved [ 0.355505] system 00:03: [io 0x0c6c] has been reserved [ 0.355507] system 00:03: [io 0x0c6f] has been reserved [ 0.355510] system 00:03: [io 0x0cd0-0x0cd1] has been reserved [ 0.355513] system 00:03: [io 0x0cd2-0x0cd3] has been reserved [ 0.355516] system 00:03: [io 0x0cd4-0x0cd5] has been reserved [ 0.355519] system 00:03: [io 0x0cd6-0x0cd7] has been reserved [ 0.355522] system 00:03: [io 0x0cd8-0x0cdf] has been reserved [ 0.355524] system 00:03: [io 0x0800-0x089f] has been reserved [ 0.355527] system 00:03: [io 0x0b00-0x0b0f] has been reserved [ 0.355530] system 00:03: [io 0x0b20-0x0b3f] has been reserved [ 0.355533] system 00:03: [io 0x0900-0x090f] has been reserved [ 0.355536] system 00:03: [io 0x0910-0x091f] has been reserved [ 0.355539] system 00:03: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.355542] system 00:03: [mem 0xfec01000-0xfec01fff] could not be reserved [ 0.355545] system 00:03: [mem 0xfedc0000-0xfedc0fff] has been reserved [ 0.355548] system 00:03: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.355551] system 00:03: [mem 0xfed80000-0xfed8ffff] could not be reserved [ 0.355554] system 00:03: [mem 0xfec10000-0xfec10fff] has been reserved [ 0.355557] system 00:03: [mem 0xff000000-0xffffffff] has been reserved [ 0.356537] pnp: PnP ACPI: found 4 devices [ 0.363315] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.363437] NET: Registered PF_INET protocol family [ 0.363634] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.365404] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.365449] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.365533] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.365930] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 0.366061] TCP: Hash tables configured (established 65536 bind 65536) [ 0.366233] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear) [ 0.366277] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.366312] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.366409] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.366422] NET: Registered PF_XDP protocol family [ 0.366439] pci 0000:00:01.2: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000 [ 0.366446] pci 0000:00:01.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000 [ 0.366463] pci 0000:00:01.2: BAR 15: assigned [mem 0xf0200000-0xf03fffff 64bit pref] [ 0.366471] pci 0000:00:01.2: BAR 13: assigned [io 0x1000-0x1fff] [ 0.366477] pci 0000:00:01.2: PCI bridge to [bus 01] [ 0.366483] pci 0000:00:01.2: bridge window [io 0x1000-0x1fff] [ 0.366489] pci 0000:00:01.2: bridge window [mem 0xfe200000-0xfe3fffff] [ 0.366495] pci 0000:00:01.2: bridge window [mem 0xf0200000-0xf03fffff 64bit pref] [ 0.366504] pci 0000:00:01.3: PCI bridge to [bus 02] [ 0.366510] pci 0000:00:01.3: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.366522] pci 0000:00:08.1: PCI bridge to [bus 03] [ 0.366531] pci 0000:00:08.1: bridge window [io 0xf000-0xffff] [ 0.366538] pci 0000:00:08.1: bridge window [mem 0xfe400000-0xfe7fffff] [ 0.366543] pci 0000:00:08.1: bridge window [mem 0xe0000000-0xf01fffff 64bit pref] [ 0.366551] pci 0000:00:08.2: PCI bridge to [bus 04] [ 0.366558] pci 0000:00:08.2: bridge window [mem 0xfe800000-0xfe8fffff] [ 0.366569] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 0.366574] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 0.366578] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 0.366582] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 0.366586] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window] [ 0.366589] pci_bus 0000:00: resource 9 [mem 0xe0000000-0xfebfffff window] [ 0.366592] pci_bus 0000:00: resource 10 [mem 0xfee00000-0xffffffff window] [ 0.366596] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] [ 0.366600] pci_bus 0000:01: resource 1 [mem 0xfe200000-0xfe3fffff] [ 0.366603] pci_bus 0000:01: resource 2 [mem 0xf0200000-0xf03fffff 64bit pref] [ 0.366607] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff] [ 0.366610] pci_bus 0000:03: resource 0 [io 0xf000-0xffff] [ 0.366614] pci_bus 0000:03: resource 1 [mem 0xfe400000-0xfe7fffff] [ 0.366617] pci_bus 0000:03: resource 2 [mem 0xe0000000-0xf01fffff 64bit pref] [ 0.366621] pci_bus 0000:04: resource 1 [mem 0xfe800000-0xfe8fffff] [ 0.366981] pci 0000:03:00.1: D0 power state depends on 0000:03:00.0 [ 0.367000] pci 0000:03:00.3: extending delay after power-on from D3hot to 20 msec [ 0.367408] pci 0000:03:00.4: extending delay after power-on from D3hot to 20 msec [ 0.367556] PCI: CLS 64 bytes, default 64 [ 0.367576] pci 0000:00:00.2: AMD-Vi: IOMMU performance counters supported [ 0.367665] Trying to unpack rootfs image as initramfs... [ 0.367684] pci 0000:00:01.0: Adding to iommu group 0 [ 0.367717] pci 0000:00:01.2: Adding to iommu group 1 [ 0.367748] pci 0000:00:01.3: Adding to iommu group 2 [ 0.367796] pci 0000:00:08.0: Adding to iommu group 3 [ 0.367829] pci 0000:00:08.1: Adding to iommu group 4 [ 0.367860] pci 0000:00:08.2: Adding to iommu group 5 [ 0.367918] pci 0000:00:14.0: Adding to iommu group 6 [ 0.367947] pci 0000:00:14.3: Adding to iommu group 6 [ 0.368090] pci 0000:00:18.0: Adding to iommu group 7 [ 0.368121] pci 0000:00:18.1: Adding to iommu group 7 [ 0.368145] pci 0000:00:18.2: Adding to iommu group 7 [ 0.368172] pci 0000:00:18.3: Adding to iommu group 7 [ 0.368197] pci 0000:00:18.4: Adding to iommu group 7 [ 0.368221] pci 0000:00:18.5: Adding to iommu group 7 [ 0.368246] pci 0000:00:18.6: Adding to iommu group 7 [ 0.368271] pci 0000:00:18.7: Adding to iommu group 7 [ 0.368299] pci 0000:01:00.0: Adding to iommu group 8 [ 0.368326] pci 0000:02:00.0: Adding to iommu group 9 [ 0.368371] pci 0000:03:00.0: Adding to iommu group 10 [ 0.368468] pci 0000:03:00.1: Adding to iommu group 11 [ 0.368508] pci 0000:03:00.2: Adding to iommu group 11 [ 0.368544] pci 0000:03:00.3: Adding to iommu group 11 [ 0.368580] pci 0000:03:00.4: Adding to iommu group 11 [ 0.368617] pci 0000:03:00.5: Adding to iommu group 11 [ 0.368654] pci 0000:03:00.6: Adding to iommu group 11 [ 0.368681] pci 0000:04:00.0: Adding to iommu group 12 [ 0.371377] pci 0000:00:00.2: can't derive routing for PCI INT A [ 0.371385] pci 0000:00:00.2: PCI INT A: not connected [ 0.371811] pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40 [ 0.371815] AMD-Vi: Extended features (0x4f77ef22294ada, 0x0): PPR NX GT IA GA PC GA_vAPIC [ 0.371829] AMD-Vi: Interrupt remapping enabled [ 0.371859] AMD-Vi: Virtual APIC enabled [ 0.372049] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.372052] software IO TLB: mapped [mem 0x00000000d0f2c000-0x00000000d4f2c000] (64MB) [ 0.372193] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank). [ 0.383045] Initialise system trusted keyrings [ 0.383063] Key type blacklist registered [ 0.383148] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 0.383182] zbud: loaded [ 0.383664] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.383826] fuse: init (API version 7.38) [ 0.384045] integrity: Platform Keyring initialized [ 0.384052] integrity: Machine keyring initialized [ 0.400543] Key type asymmetric registered [ 0.400554] Asymmetric key parser 'x509' registered [ 0.400635] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243) [ 0.400756] io scheduler mq-deadline registered [ 0.402833] pcieport 0000:00:01.2: PME: Signaling with IRQ 26 [ 0.402958] pcieport 0000:00:01.2: AER: enabled with IRQ 26 [ 0.403010] pcieport 0000:00:01.2: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise- Interlock- NoCompl+ IbPresDis- LLActRep+ [ 0.403362] pcieport 0000:00:01.3: PME: Signaling with IRQ 27 [ 0.403503] pcieport 0000:00:01.3: AER: enabled with IRQ 27 [ 0.403762] pcieport 0000:00:08.1: PME: Signaling with IRQ 28 [ 0.404218] pcieport 0000:00:08.2: PME: Signaling with IRQ 29 [ 0.404331] pcieport 0000:00:08.2: AER: enabled with IRQ 29 [ 0.404538] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.404695] efifb: probing for efifb [ 0.404733] efifb: showing boot graphics [ 0.407066] efifb: framebuffer at 0xe0000000, using 8100k, total 8100k [ 0.407070] efifb: mode is 1920x1080x32, linelength=7680, pages=1 [ 0.407075] efifb: scrolling: redraw [ 0.407077] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.407179] fbcon: Deferring console take-over [ 0.407183] fb0: EFI VGA frame buffer device [ 0.409091] ACPI: AC: AC Adapter [AC0] (off-line) [ 0.409253] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:39/PNP0C09:00/PNP0C0D:00/input/input0 [ 0.409308] ACPI: button: Lid Switch [LID] [ 0.409389] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 0.409440] ACPI: button: Power Button [PWRB] [ 0.409524] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 [ 0.409573] ACPI: button: Sleep Button [SLPB] [ 0.409653] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 0.409767] ACPI: button: Power Button [PWRF] [ 0.409858] Monitor-Mwait will be used to enter C-1 state [ 0.409871] ACPI: \_PR_.P000: Found 2 idle states [ 0.410102] ACPI: \_PR_.P001: Found 2 idle states [ 0.410400] ACPI: \_PR_.P002: Found 2 idle states [ 0.410725] ACPI: \_PR_.P003: Found 2 idle states [ 0.410942] ACPI: \_PR_.P004: Found 2 idle states [ 0.411227] ACPI: \_PR_.P005: Found 2 idle states [ 0.411557] ACPI: \_PR_.P006: Found 2 idle states [ 0.411905] ACPI: \_PR_.P007: Found 2 idle states [ 0.415050] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.415059] ACPI: thermal: Thermal Zone [THRM] (55 C) [ 0.415666] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.433847] Linux agpgart interface v0.103 [ 0.434110] ACPI: battery: Slot [BAT0] (battery present) [ 0.435468] tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xdd47e000-0xdd47efff flags 0x200] vs dd47e000 4000 [ 0.435493] fbcon: Taking over console [ 0.435668] Console: switching to colour frame buffer device 240x67 [ 0.437637] tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xdd482000-0xdd482fff flags 0x200] vs dd482000 4000 [ 0.501835] tpm_crb MSFT0101:00: Disabling hwrng [ 0.510686] loop: module loaded [ 0.511732] tun: Universal TUN/TAP device driver, 1.6 [ 0.511879] PPP generic driver version 2.4.2 [ 0.512263] i8042: PNP: PS/2 Controller [PNP030b:PS2K] at 0x60,0x64 irq 1 [ 0.512271] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 0.513647] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.513974] mousedev: PS/2 mouse device common for all mice [ 0.515318] rtc_cmos 00:01: RTC can wake from S4 [ 0.515909] rtc_cmos 00:01: registered as rtc0 [ 0.515972] rtc_cmos 00:01: setting system clock to 2024-04-15T15:27:21 UTC (1713194841) [ 0.516068] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.516097] i2c_dev: i2c /dev entries driver [ 0.516305] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 0.516347] device-mapper: uevent: version 1.0.3 [ 0.516514] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com [ 0.516586] platform eisa.0: Probing EISA bus 0 [ 0.516593] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 0.516600] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 0.516606] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 0.516611] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 0.516617] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 0.516622] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 0.516627] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 0.516632] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 0.516638] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 0.516642] platform eisa.0: EISA: Detected 0 cards [ 0.516649] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled [ 0.517329] ledtrig-cpu: registered to indicate activity on CPUs [ 0.517689] drop_monitor: Initializing network drop monitor service [ 0.524333] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 0.551269] NET: Registered PF_INET6 protocol family [ 0.823472] Freeing initrd memory: 68556K [ 0.838150] Segment Routing with IPv6 [ 0.838188] In-situ OAM (IOAM) with IPv6 [ 0.838249] NET: Registered PF_PACKET protocol family [ 0.838378] Key type dns_resolver registered [ 0.839987] microcode: CPU1: patch_level=0x08108102 [ 0.839992] microcode: CPU0: patch_level=0x08108102 [ 0.840010] microcode: CPU2: patch_level=0x08108102 [ 0.840010] microcode: CPU3: patch_level=0x08108102 [ 0.840014] microcode: CPU4: patch_level=0x08108102 [ 0.840014] microcode: CPU5: patch_level=0x08108102 [ 0.840017] microcode: CPU6: patch_level=0x08108102 [ 0.840017] microcode: CPU7: patch_level=0x08108102 [ 0.840046] microcode: Microcode Update Driver: v2.2. [ 0.840057] IPI shorthand broadcast: enabled [ 0.842879] sched_clock: Marking stable (841381833, 294853)->(844433355, -2756669) [ 0.843123] registered taskstats version 1 [ 0.843937] Loading compiled-in X.509 certificates [ 0.844611] Loaded X.509 cert 'Build time autogenerated kernel key: 64d8c1ccb61f14b3afd1bd02d3c86dda564ef290' [ 0.845105] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969' [ 0.845594] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19' [ 0.845596] blacklist: Loading compiled-in revocation X.509 certificates [ 0.845621] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing: 61482aa2830d0ab2ad5af10b7250da9033ddcef0' [ 0.845641] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2017): 242ade75ac4a15e50d50c84b0d45ff3eae707a03' [ 0.845660] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (ESM 2018): 365188c1d374d6b07c3c8f240f8ef722433d6a8b' [ 0.845683] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2019): c0746fd6c5da3ae827864651ad66ae47fe24b3e8' [ 0.845700] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v1): a8d54bbb3825cfb94fa13c9f8a594a195c107b8d' [ 0.845717] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v2): 4cf046892d6fd3c9a5b03f98d845f90851dc6a8c' [ 0.845735] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v3): 100437bb6de6e469b581e61cd66bce3ef4ed53af' [ 0.845758] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (Ubuntu Core 2019): c1d57b8f6b743f23ee41f4f7ee292f06eecadfb9' [ 0.849083] Key type .fscrypt registered [ 0.849085] Key type fscrypt-provisioning registered [ 0.849150] Key type trusted registered [ 0.857411] Key type encrypted registered [ 0.857430] AppArmor: AppArmor sha1 policy hashing enabled [ 0.858498] integrity: Loading X.509 certificate: UEFI:db [ 0.858940] integrity: Loaded X.509 cert 'ASUSTeK Notebook SW Key Certificate: b8e581e4df77a5bb4282d5ccfc00c071' [ 0.858945] integrity: Loading X.509 certificate: UEFI:db [ 0.859161] integrity: Loaded X.509 cert 'ASUSTeK MotherBoard SW Key Certificate: da83b990422ebc8c441f8d8b039a65a2' [ 0.859163] integrity: Loading X.509 certificate: UEFI:db [ 0.859195] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' [ 0.859197] integrity: Loading X.509 certificate: UEFI:db [ 0.859224] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' [ 0.859226] integrity: Loading X.509 certificate: UEFI:db [ 0.859451] integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' [ 0.861269] integrity: Loading X.509 certificate: UEFI:MokListRT (MOKvar table) [ 0.861443] integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' [ 0.861451] Loading compiled-in module X.509 certificates [ 0.862011] Loaded X.509 cert 'Build time autogenerated kernel key: 64d8c1ccb61f14b3afd1bd02d3c86dda564ef290' [ 0.862015] ima: Allocated hash algorithm: sha1 [ 0.970056] audit: type=1807 audit(1713194841.951:2): action=measure func=KEXEC_KERNEL_CHECK res=1 [ 0.970072] audit: type=1807 audit(1713194841.951:3): action=measure func=MODULE_CHECK res=1 [ 0.970089] evm: Initialising EVM extended attributes: [ 0.970095] evm: security.selinux [ 0.970100] evm: security.SMACK64 [ 0.970104] evm: security.SMACK64EXEC [ 0.970107] evm: security.SMACK64TRANSMUTE [ 0.970111] evm: security.SMACK64MMAP [ 0.970114] evm: security.apparmor [ 0.970117] evm: security.ima [ 0.970121] evm: security.capability [ 0.970125] evm: HMAC attrs: 0x1 [ 0.971127] PM: Magic number: 4:631:487 [ 0.972115] acpi_cpufreq: overriding BIOS provided _PSD data [ 1.101530] RAS: Correctable Errors collector initialized. [ 1.101696] Lockdown: swapper/0: hibernation is restricted; see man kernel_lockdown.7 [ 1.101814] clk: Disabling unused clocks [ 1.106866] Freeing unused decrypted memory: 2036K [ 1.108923] Freeing unused kernel image (initmem) memory: 4808K [ 1.120416] Write protecting the kernel read-only data: 34816k [ 1.122023] Freeing unused kernel image (rodata/data gap) memory: 1148K [ 1.256063] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.256078] Run /init as init process [ 1.256082] with arguments: [ 1.256085] /init [ 1.256088] splash [ 1.256090] with environment: [ 1.256092] HOME=/ [ 1.256094] TERM=linux [ 1.256097] BOOT_IMAGE=/boot/vmlinuz-6.5.0-26-generic [ 1.384591] tsc: Refined TSC clocksource calibration: 2096.052 MHz [ 1.384625] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1e369f2af55, max_idle_ns: 440795289088 ns [ 1.384689] clocksource: Switched to clocksource tsc [ 1.482177] hid: raw HID events driver (C) Jiri Kosina [ 1.491899] ACPI: video: Video Device [VGA1] (multi-head: yes rom: no post: no) [ 1.492673] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:13/LNXVIDEO:01/input/input5 [ 1.542844] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 1.542858] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection [ 1.543179] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20 [ 1.598521] xhci_hcd 0000:03:00.3: xHCI Host Controller [ 1.598543] xhci_hcd 0000:03:00.3: new USB bus registered, assigned bus number 1 [ 1.598760] xhci_hcd 0000:03:00.3: hcc params 0x0270ffe5 hci version 0x110 quirks 0x0000000840000410 [ 1.599679] xhci_hcd 0000:03:00.3: xHCI Host Controller [ 1.599686] xhci_hcd 0000:03:00.3: new USB bus registered, assigned bus number 2 [ 1.599693] xhci_hcd 0000:03:00.3: Host supports USB 3.1 Enhanced SuperSpeed [ 1.599839] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05 [ 1.599845] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.599849] usb usb1: Product: xHCI Host Controller [ 1.599852] usb usb1: Manufacturer: Linux 6.5.0-26-generic xhci-hcd [ 1.599856] usb usb1: SerialNumber: 0000:03:00.3 [ 1.600165] hub 1-0:1.0: USB hub found [ 1.600191] hub 1-0:1.0: 4 ports detected [ 1.602725] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.602781] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.05 [ 1.602786] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.602790] usb usb2: Product: xHCI Host Controller [ 1.602793] usb usb2: Manufacturer: Linux 6.5.0-26-generic xhci-hcd [ 1.602797] usb usb2: SerialNumber: 0000:03:00.3 [ 1.602987] hub 2-0:1.0: USB hub found [ 1.603007] hub 2-0:1.0: 4 ports detected [ 1.605885] xhci_hcd 0000:03:00.4: xHCI Host Controller [ 1.605899] xhci_hcd 0000:03:00.4: new USB bus registered, assigned bus number 3 [ 1.606093] xhci_hcd 0000:03:00.4: hcc params 0x0260ffe5 hci version 0x110 quirks 0x0000000840000410 [ 1.606925] xhci_hcd 0000:03:00.4: xHCI Host Controller [ 1.606932] xhci_hcd 0000:03:00.4: new USB bus registered, assigned bus number 4 [ 1.606938] xhci_hcd 0000:03:00.4: Host supports USB 3.1 Enhanced SuperSpeed [ 1.607043] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05 [ 1.607048] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.607052] usb usb3: Product: xHCI Host Controller [ 1.607055] usb usb3: Manufacturer: Linux 6.5.0-26-generic xhci-hcd [ 1.607059] usb usb3: SerialNumber: 0000:03:00.4 [ 1.607263] hub 3-0:1.0: USB hub found [ 1.607282] hub 3-0:1.0: 2 ports detected [ 1.608098] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.608146] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.05 [ 1.608150] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.608154] usb usb4: Product: xHCI Host Controller [ 1.608157] usb usb4: Manufacturer: Linux 6.5.0-26-generic xhci-hcd [ 1.608161] usb usb4: SerialNumber: 0000:03:00.4 [ 1.608369] hub 4-0:1.0: USB hub found [ 1.608391] hub 4-0:1.0: 1 port detected [ 1.617774] ahci 0000:04:00.0: version 3.0 [ 1.617810] ahci 0000:04:00.0: enabling device (0000 -> 0002) [ 1.628612] ahci 0000:04:00.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode [ 1.628630] ahci 0000:04:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part [ 1.629430] scsi host0: ahci [ 1.629801] ata1: SATA max UDMA/133 abar m2048@0xfe800000 port 0xfe800100 irq 48 [ 1.860343] usb 3-1: new high-speed USB device number 2 using xhci_hcd [ 1.860450] usb 1-3: new full-speed USB device number 2 using xhci_hcd [ 1.944697] ata1: SATA link down (SStatus 0 SControl 300) [ 1.971637] input: ELAN1200:00 04F3:309F Mouse as /devices/platform/AMDI0010:01/i2c-0/i2c-ELAN1200:00/0018:04F3:309F.0001/input/input6 [ 1.971976] input: ELAN1200:00 04F3:309F Touchpad as /devices/platform/AMDI0010:01/i2c-0/i2c-ELAN1200:00/0018:04F3:309F.0001/input/input7 [ 1.972284] hid-generic 0018:04F3:309F.0001: input,hidraw0: I2C HID v1.00 Mouse [ELAN1200:00 04F3:309F] on i2c-ELAN1200:00 [ 1.985738] nvme 0000:02:00.0: platform quirk: setting simple suspend [ 1.985978] nvme nvme0: pci function 0000:02:00.0 [ 1.997026] asus_wmi: ASUS WMI generic driver loaded [ 2.003443] nvme nvme0: missing or invalid SUBNQN field. [ 2.003630] nvme nvme0: Shutdown timeout set to 10 seconds [ 2.011208] usb 3-1: New USB device found, idVendor=0bda, idProduct=0129, bcdDevice=39.60 [ 2.011222] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.011230] usb 3-1: Product: USB2.0-CRW [ 2.011237] usb 3-1: Manufacturer: Generic [ 2.011243] usb 3-1: SerialNumber: 20100201396000000 [ 2.021815] nvme nvme0: 8/0/0 default/read/poll queues [ 2.030858] usb 1-3: New USB device found, idVendor=093a, idProduct=2510, bcdDevice= 1.26 [ 2.030875] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.030882] usb 1-3: Product: wireless 2.4G Mouse [ 2.030889] usb 1-3: Manufacturer: wireless [ 2.043662] nvme0n1: p1 p2 p3 p4 p5 [ 2.063536] input: wireless wireless 2.4G Mouse as /devices/pci0000:00/0000:00:08.1/0000:03:00.3/usb1/1-3/1-3:1.0/0003:093A:2510.0002/input/input8 [ 2.063783] input: wireless wireless 2.4G Mouse Consumer Control as /devices/pci0000:00/0000:00:08.1/0000:03:00.3/usb1/1-3/1-3:1.0/0003:093A:2510.0002/input/input9 [ 2.063895] input: wireless wireless 2.4G Mouse System Control as /devices/pci0000:00/0000:00:08.1/0000:03:00.3/usb1/1-3/1-3:1.0/0003:093A:2510.0002/input/input10 [ 2.064174] hid-generic 0003:093A:2510.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [wireless wireless 2.4G Mouse] on usb-0000:03:00.3-3/input0 [ 2.064230] usbcore: registered new interface driver usbhid [ 2.064233] usbhid: USB HID core driver [ 2.184323] usb 3-2: new high-speed USB device number 3 using xhci_hcd [ 2.334239] usb 3-2: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.37 [ 2.334256] usb 3-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.334264] usb 3-2: Product: USB2.0 Hub [ 2.376110] hub 3-2:1.0: USB hub found [ 2.376455] hub 3-2:1.0: 4 ports detected [ 2.401790] usbcore: registered new interface driver rtsx_usb [ 2.668374] usb 3-2.1: new full-speed USB device number 4 using xhci_hcd [ 2.779182] usb 3-2.1: New USB device found, idVendor=13d3, idProduct=3491, bcdDevice= 0.01 [ 2.779200] usb 3-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.902114] EXT4-fs (nvme0n1p5): mounted filesystem b7747379-4fee-498f-8eba-061d7f354f27 ro with ordered data mode. Quota mode: none. [ 2.908531] usb 3-2.2: new high-speed USB device number 5 using xhci_hcd [ 3.033972] usb 3-2.2: New USB device found, idVendor=13d3, idProduct=56dc, bcdDevice=18.52 [ 3.033990] usb 3-2.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 3.033997] usb 3-2.2: Product: USB2.0 HD UVC WebCam [ 3.034003] usb 3-2.2: Manufacturer: Azurewave [ 3.034009] usb 3-2.2: SerialNumber: 0x0001 [ 10.293472] systemd[1]: Inserted module 'autofs4' [ 10.387589] systemd[1]: systemd 249.11-0ubuntu3.12 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) [ 10.388004] systemd[1]: Detected architecture x86-64. [ 10.389639] systemd[1]: Hostname set to . [ 10.393186] Lockdown: systemd: /dev/mem,kmem,port is restricted; see man kernel_lockdown.7 [ 10.427462] systemd[1]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set [ 10.460562] block nvme0n1: the capability attribute has been deprecated. [ 10.662124] systemd[1]: Queued start job for default target Graphical Interface. [ 10.683960] systemd[1]: Created slice Slice /system/modprobe. [ 10.685017] systemd[1]: Created slice Slice /system/systemd-fsck. [ 10.685652] systemd[1]: Created slice User and Session Slice. [ 10.685821] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 10.686206] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 10.686368] systemd[1]: Reached target User and Group Name Lookups. [ 10.686416] systemd[1]: Reached target Remote File Systems. [ 10.686456] systemd[1]: Reached target Slice Units. [ 10.686506] systemd[1]: Reached target Mounting snaps. [ 10.686575] systemd[1]: Reached target Local Verity Protected Volumes. [ 10.686860] systemd[1]: Listening on Syslog Socket. [ 10.687123] systemd[1]: Listening on fsck to fsckd communication Socket. [ 10.687247] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 10.687597] systemd[1]: Listening on Journal Audit Socket. [ 10.687781] systemd[1]: Listening on Journal Socket (/dev/log). [ 10.688011] systemd[1]: Listening on Journal Socket. [ 10.688437] systemd[1]: Listening on udev Control Socket. [ 10.688649] systemd[1]: Listening on udev Kernel Socket. [ 10.690560] systemd[1]: Mounting Huge Pages File System... [ 10.692627] systemd[1]: Mounting POSIX Message Queue File System... [ 10.694901] systemd[1]: Mounting Kernel Debug File System... [ 10.697071] systemd[1]: Mounting Kernel Trace File System... [ 10.700759] systemd[1]: Starting Journal Service... [ 10.704148] systemd[1]: Starting Set the console keyboard layout... [ 10.707523] systemd[1]: Starting Create List of Static Device Nodes... [ 10.711045] systemd[1]: Starting Load Kernel Module configfs... [ 10.713844] systemd[1]: Starting Load Kernel Module drm... [ 10.716654] systemd[1]: Starting Load Kernel Module efi_pstore... [ 10.719526] systemd[1]: Starting Load Kernel Module fuse... [ 10.720077] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 10.724936] systemd[1]: Starting Load Kernel Modules... [ 10.727501] systemd[1]: Starting Remount Root and Kernel File Systems... [ 10.730545] systemd[1]: Starting Coldplug All udev Devices... [ 10.734402] systemd[1]: Mounted Huge Pages File System. [ 10.734586] pstore: Using crash dump compression: deflate [ 10.734873] systemd[1]: Mounted POSIX Message Queue File System. [ 10.736093] systemd[1]: Mounted Kernel Debug File System. [ 10.737954] systemd[1]: Mounted Kernel Trace File System. [ 10.743437] systemd[1]: Finished Create List of Static Device Nodes. [ 10.748064] systemd[1]: modprobe@configfs.service: Deactivated successfully. [ 10.750412] systemd[1]: Finished Load Kernel Module configfs. [ 10.751065] pstore: Registered efi_pstore as persistent store backend [ 10.751667] systemd[1]: modprobe@fuse.service: Deactivated successfully. [ 10.752412] systemd[1]: Finished Load Kernel Module fuse. [ 10.753130] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully. [ 10.753790] systemd[1]: Finished Load Kernel Module efi_pstore. [ 10.756766] systemd[1]: Mounting FUSE Control File System... [ 10.759471] systemd[1]: Mounting Kernel Configuration File System... [ 10.762123] systemd[1]: Mounted FUSE Control File System. [ 10.764169] systemd[1]: Mounted Kernel Configuration File System. [ 10.800691] systemd[1]: Finished Set the console keyboard layout. [ 10.808226] ACPI: bus type drm_connector registered [ 10.810423] systemd[1]: modprobe@drm.service: Deactivated successfully. [ 10.811135] systemd[1]: Finished Load Kernel Module drm. [ 10.813017] lp: driver loaded but no devices found [ 10.814612] EXT4-fs (nvme0n1p5): re-mounted b7747379-4fee-498f-8eba-061d7f354f27 r/w. Quota mode: none. [ 10.817686] systemd[1]: Finished Remount Root and Kernel File Systems. [ 10.820793] systemd[1]: Activating swap /swapfile... [ 10.821008] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 10.823765] systemd[1]: Starting Load/Save Random Seed... [ 10.826873] systemd[1]: Starting Create System Users... [ 10.828063] Adding 2097148k swap on /swapfile. Priority:-2 extents:15 across:201187328k SSFS [ 10.828241] systemd[1]: Activated swap /swapfile. [ 10.828872] systemd[1]: Reached target Swaps. [ 10.830835] ppdev: user-space parallel port driver [ 10.838965] systemd[1]: Started Journal Service. [ 10.851340] systemd-journald[259]: Received client request to flush runtime journal. [ 10.891351] loop0: detected capacity change from 0 to 18392 [ 10.892180] loop1: detected capacity change from 0 to 8 [ 10.896644] loop2: detected capacity change from 0 to 20128 [ 10.901237] loop3: detected capacity change from 0 to 636520 [ 10.904115] loop4: detected capacity change from 0 to 636872 [ 10.909524] loop5: detected capacity change from 0 to 113992 [ 10.912942] loop6: detected capacity change from 0 to 130880 [ 10.916231] loop7: detected capacity change from 0 to 130960 [ 10.920986] loop8: detected capacity change from 0 to 151992 [ 10.924925] loop9: detected capacity change from 0 to 151296 [ 10.928083] loop10: detected capacity change from 0 to 549368 [ 10.931146] loop11: detected capacity change from 0 to 549384 [ 10.934267] loop12: detected capacity change from 0 to 716176 [ 10.938402] loop13: detected capacity change from 0 to 1017816 [ 10.941306] loop14: detected capacity change from 0 to 1032504 [ 10.944582] loop15: detected capacity change from 0 to 187776 [ 10.947668] loop16: detected capacity change from 0 to 173608 [ 10.951617] loop17: detected capacity change from 0 to 26472 [ 10.954679] loop18: detected capacity change from 0 to 25240 [ 10.958347] loop19: detected capacity change from 0 to 82800 [ 10.961521] loop20: detected capacity change from 0 to 80072 [ 10.967298] loop21: detected capacity change from 0 to 952 [ 10.970178] loop22: detected capacity change from 0 to 904 [ 11.319060] ccp 0000:03:00.2: enabling device (0000 -> 0002) [ 11.347635] snd_pci_acp3x 0000:03:00.5: enabling device (0000 -> 0002) [ 11.347986] snd_pci_acp3x 0000:03:00.5: ACP audio mode : 2 [ 11.357672] ccp 0000:03:00.2: ccp enabled [ 11.357704] ccp 0000:03:00.2: psp: unable to access the device: you might be running a broken BIOS. [ 11.394930] mc: Linux media interface: v0.10 [ 11.508947] asus_wmi: Initialization: 0x1 [ 11.509174] asus_wmi: BIOS WMI version: 9.0 [ 11.509325] asus_wmi: SFUN value: 0x21 [ 11.509334] asus-nb-wmi asus-nb-wmi: Detected ATK, not ASUSWMI, use DSTS [ 11.509341] asus-nb-wmi asus-nb-wmi: Detected ATK, enable event queue [ 11.511901] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 11.512735] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 11.529100] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input11 [ 11.562073] RAPL PMU: API unit is 2^-32 Joules, 1 fixed counters, 163840 ms ovfl timer [ 11.562087] RAPL PMU: hw unit of domain package 2^-16 Joules [ 11.661583] asus_wmi: fan_curve_get_factory_default (0x00110024) failed: -19 [ 11.662456] asus_wmi: fan_curve_get_factory_default (0x00110025) failed: -19 [ 11.669337] videodev: Linux video capture interface: v2.00 [ 11.692258] audit: type=1400 audit(1713194852.672:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=450 comm="apparmor_parser" [ 11.692276] audit: type=1400 audit(1713194852.672:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=450 comm="apparmor_parser" [ 11.695199] audit: type=1400 audit(1713194852.672:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oosplash" pid=457 comm="apparmor_parser" [ 11.696335] ACPI: battery: new extension: ASUS Battery Extension [ 11.697072] audit: type=1400 audit(1713194852.676:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="tcpdump" pid=456 comm="apparmor_parser" [ 11.699726] audit: type=1400 audit(1713194852.676:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ubuntu_pro_apt_news" pid=452 comm="apparmor_parser" [ 11.701818] audit: type=1400 audit(1713194852.680:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=459 comm="apparmor_parser" [ 11.704931] audit: type=1400 audit(1713194852.684:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=451 comm="apparmor_parser" [ 11.704965] audit: type=1400 audit(1713194852.684:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=451 comm="apparmor_parser" [ 11.704972] audit: type=1400 audit(1713194852.684:12): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=451 comm="apparmor_parser" [ 11.704980] audit: type=1400 audit(1713194852.684:13): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/{,usr/}sbin/dhclient" pid=451 comm="apparmor_parser" [ 11.740694] Bluetooth: Core ver 2.22 [ 11.740775] NET: Registered PF_BLUETOOTH protocol family [ 11.740779] Bluetooth: HCI device and connection manager initialized [ 11.740789] Bluetooth: HCI socket layer initialized [ 11.740795] Bluetooth: L2CAP socket layer initialized [ 11.740807] Bluetooth: SCO socket layer initialized [ 11.741372] cryptd: max_cpu_qlen set to 1000 [ 11.912515] input: ELAN1200:00 04F3:309F Mouse as /devices/platform/AMDI0010:01/i2c-0/i2c-ELAN1200:00/0018:04F3:309F.0001/input/input12 [ 11.912803] input: ELAN1200:00 04F3:309F Touchpad as /devices/platform/AMDI0010:01/i2c-0/i2c-ELAN1200:00/0018:04F3:309F.0001/input/input13 [ 11.913062] hid-multitouch 0018:04F3:309F.0001: input,hidraw0: I2C HID v1.00 Mouse [ELAN1200:00 04F3:309F] on i2c-ELAN1200:00 [ 11.962597] AVX2 version of gcm_enc/dec engaged. [ 11.962685] AES CTR mode by8 optimization enabled [ 12.149015] ath10k_pci 0000:01:00.0: enabling device (0000 -> 0002) [ 12.151385] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [ 12.176889] usbcore: registered new interface driver btusb [ 12.185446] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin [ 12.185460] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111 [ 12.194253] usb 3-2.2: Found UVC 1.50 device USB2.0 HD UVC WebCam (13d3:56dc) [ 12.203258] usbcore: registered new interface driver uvcvideo [ 12.380386] AMD-Vi: AMD IOMMUv2 loaded and initialized [ 12.432093] ath10k_pci 0000:01:00.0: qca9377 hw1.1 target 0x05020001 chip_id 0x003821ff sub 1a3b:2231 [ 12.432113] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0 [ 12.432896] ath10k_pci 0000:01:00.0: firmware ver WLAN.TF.2.1-00021-QCARMSWP-1 api 6 features wowlan,ignore-otp crc32 42e41877 [ 12.499749] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id N/A crc32 8aedfa4a [ 12.523998] snd_hda_intel 0000:03:00.1: enabling device (0000 -> 0002) [ 12.524205] snd_hda_intel 0000:03:00.1: Handle vga_switcheroo audio client [ 12.524650] snd_hda_intel 0000:03:00.6: enabling device (0000 -> 0002) [ 12.581277] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin [ 12.595310] ath10k_pci 0000:01:00.0: htt-ver 3.56 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1 [ 12.614572] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported. [ 12.675411] ath: EEPROM regdomain: 0x6a [ 12.675423] ath: EEPROM indicates we should expect a direct regpair map [ 12.675428] ath: Country alpha2 being used: 00 [ 12.675432] ath: Regpair used: 0x6a [ 12.714034] loop23: detected capacity change from 0 to 8 [ 12.724200] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:08.1/0000:03:00.1/sound/card0/input14 [ 12.725363] ath10k_pci 0000:01:00.0 wlp1s0: renamed from wlan0 [ 12.757807] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC256: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 12.757827] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 12.757834] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 12.757840] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 12.757844] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 12.757849] snd_hda_codec_realtek hdaudioC1D0: Headset Mic=0x19 [ 12.757854] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12 [ 12.805175] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 12.805184] Bluetooth: BNEP filters: protocol multicast [ 12.805195] Bluetooth: BNEP socket layer initialized [ 12.822117] kvm_amd: TSC scaling supported [ 12.822125] kvm_amd: Nested Virtualization enabled [ 12.822128] kvm_amd: Nested Paging enabled [ 12.822134] kvm_amd: SEV enabled (ASIDs 0 - 15) [ 12.822137] kvm_amd: SEV-ES enabled (ASIDs 0 - 4294967295) [ 12.822174] kvm_amd: Virtual VMLOAD VMSAVE supported [ 12.822175] kvm_amd: Virtual GIF supported [ 12.822176] kvm_amd: LBR virtualization supported [ 12.822645] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:08.1/0000:03:00.6/sound/card1/input15 [ 12.955796] MCE: In-kernel MCE decoding enabled. [ 13.134662] intel_rapl_common: Found RAPL domain package [ 13.134674] intel_rapl_common: Found RAPL domain core [ 13.158814] Bluetooth: MGMT ver 1.22 [ 16.950011] NET: Registered PF_ALG protocol family [ 16.969970] [drm] amdgpu kernel modesetting enabled. [ 16.993699] kauditd_printk_skb: 60 callbacks suppressed [ 16.993708] audit: type=1400 audit(1713194857.972:74): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=833 comm="apparmor_parser" [ 16.999103] amdgpu: CRAT table disabled by module option [ 16.999121] amdgpu: Virtual CRAT table created for CPU [ 16.999171] amdgpu: Topology: Add CPU node [ 16.999584] amdgpu 0000:03:00.0: enabling device (0006 -> 0007) [ 16.999714] [drm] initializing kernel modesetting (RAVEN 0x1002:0x15D8 0x1043:0x1821 0xC2). [ 17.001849] [drm] register mmio base: 0xFE700000 [ 17.001859] [drm] register mmio size: 524288 [ 17.002030] [drm] add ip block number 0 [ 17.002034] [drm] add ip block number 1 [ 17.002037] [drm] add ip block number 2 [ 17.002041] [drm] add ip block number 3 [ 17.002044] [drm] add ip block number 4 [ 17.002047] [drm] add ip block number 5 [ 17.002051] [drm] add ip block number 6 [ 17.002054] [drm] add ip block number 7 [ 17.002057] [drm] add ip block number 8 [ 17.003250] amdgpu 0000:03:00.0: amdgpu: Fetched VBIOS from VFCT [ 17.003258] amdgpu: ATOM BIOS: 113-PICASSO-114 [ 17.011860] [drm] VCN decode is enabled in VM mode [ 17.011870] [drm] VCN encode is enabled in VM mode [ 17.011874] [drm] JPEG decode is enabled in VM mode [ 17.014155] Console: switching to colour dummy device 80x25 [ 17.014253] amdgpu 0000:03:00.0: vgaarb: deactivate vga console [ 17.014261] amdgpu 0000:03:00.0: amdgpu: Trusted Memory Zone (TMZ) feature enabled [ 17.014408] [drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit [ 17.014430] amdgpu 0000:03:00.0: amdgpu: VRAM: 2048M 0x000000F400000000 - 0x000000F47FFFFFFF (2048M used) [ 17.014436] amdgpu 0000:03:00.0: amdgpu: GART: 1024M 0x0000000000000000 - 0x000000003FFFFFFF [ 17.014440] amdgpu 0000:03:00.0: amdgpu: AGP: 267419648M 0x000000F800000000 - 0x0000FFFFFFFFFFFF [ 17.014466] [drm] Detected VRAM RAM=2048M, BAR=2048M [ 17.014470] [drm] RAM width 128bits DDR4 [ 17.014806] [drm] amdgpu: 2048M of VRAM memory ready [ 17.014814] [drm] amdgpu: 2929M of GTT memory ready. [ 17.014861] [drm] GART: num cpu pages 262144, num gpu pages 262144 [ 17.015189] [drm] PCIE GART of 1024M enabled. [ 17.015194] [drm] PTB located at 0x000000F400A00000 [ 17.015886] amdgpu: hwmgr_sw_init smu backed is smu10_smu [ 17.018194] [drm] Found VCN firmware Version ENC: 1.13 DEC: 2 VEP: 0 Revision: 3 [ 17.018219] amdgpu 0000:03:00.0: amdgpu: Will use PSP to load VCN firmware [ 17.040124] [drm] reserve 0x400000 from 0xf47fc00000 for PSP TMR [ 17.143950] amdgpu 0000:03:00.0: amdgpu: RAS: optional ras ta ucode is not available [ 17.160122] amdgpu 0000:03:00.0: amdgpu: RAP: optional rap ta ucode is not available [ 17.167305] [drm] DM_PPLIB: values for F clock [ 17.167310] [drm] DM_PPLIB: 400000 in kHz, 2924 in mV [ 17.167313] [drm] DM_PPLIB: 933000 in kHz, 3249 in mV [ 17.167315] [drm] DM_PPLIB: 1067000 in kHz, 3924 in mV [ 17.167318] [drm] DM_PPLIB: 1200000 in kHz, 4074 in mV [ 17.167322] [drm] DM_PPLIB: values for DCF clock [ 17.167324] [drm] DM_PPLIB: 300000 in kHz, 2924 in mV [ 17.167326] [drm] DM_PPLIB: 600000 in kHz, 3249 in mV [ 17.167329] [drm] DM_PPLIB: 626000 in kHz, 3924 in mV [ 17.167331] [drm] DM_PPLIB: 654000 in kHz, 4074 in mV [ 17.168855] [drm] Display Core v3.2.241 initialized on DCN 1.0 [ 17.172329] snd_hda_intel 0000:03:00.1: bound 0000:03:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu]) [ 17.260540] [drm] kiq ring mec 2 pipe 1 q 0 [ 17.275532] [drm] VCN decode and encode initialized successfully(under SPG Mode). [ 17.327426] amdgpu: HMM registered 2048MB device memory [ 17.330940] kfd kfd: amdgpu: Allocated 3969056 bytes on gart [ 17.330967] kfd kfd: amdgpu: Total number of KFD nodes to be created: 1 [ 17.331115] amdgpu: Virtual CRAT table created for GPU [ 17.331252] amdgpu: Topology: Add dGPU node [0x15d8:0x1002] [ 17.331258] kfd kfd: amdgpu: added device 1002:15d8 [ 17.331284] amdgpu 0000:03:00.0: amdgpu: SE 1, SH per SE 1, CU per SH 11, active_cu_number 8 [ 17.331520] amdgpu 0000:03:00.0: amdgpu: ring gfx uses VM inv eng 0 on hub 0 [ 17.331525] amdgpu 0000:03:00.0: amdgpu: ring gfx_low uses VM inv eng 1 on hub 0 [ 17.331529] amdgpu 0000:03:00.0: amdgpu: ring gfx_high uses VM inv eng 4 on hub 0 [ 17.331533] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 5 on hub 0 [ 17.331536] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 6 on hub 0 [ 17.331540] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 7 on hub 0 [ 17.331544] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 8 on hub 0 [ 17.331547] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 9 on hub 0 [ 17.331551] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 10 on hub 0 [ 17.331555] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 11 on hub 0 [ 17.331558] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 12 on hub 0 [ 17.331562] amdgpu 0000:03:00.0: amdgpu: ring kiq_0.2.1.0 uses VM inv eng 13 on hub 0 [ 17.331565] amdgpu 0000:03:00.0: amdgpu: ring sdma0 uses VM inv eng 0 on hub 8 [ 17.331569] amdgpu 0000:03:00.0: amdgpu: ring vcn_dec uses VM inv eng 1 on hub 8 [ 17.331573] amdgpu 0000:03:00.0: amdgpu: ring vcn_enc0 uses VM inv eng 4 on hub 8 [ 17.331577] amdgpu 0000:03:00.0: amdgpu: ring vcn_enc1 uses VM inv eng 5 on hub 8 [ 17.331581] amdgpu 0000:03:00.0: amdgpu: ring jpeg_dec uses VM inv eng 6 on hub 8 [ 17.339382] [drm] Initialized amdgpu 3.54.0 20150101 for 0000:03:00.0 on minor 0 [ 17.347437] fbcon: amdgpudrmfb (fb0) is primary device [ 17.351675] Console: switching to colour frame buffer device 240x67 [ 17.375514] amdgpu 0000:03:00.0: [drm] fb0: amdgpudrmfb frame buffer device [ 18.109690] audit: type=1400 audit(1713194859.088:75): apparmor="DENIED" operation="capable" class="cap" profile="/usr/lib/snapd/snap-confine" pid=996 comm="snap-confine" capability=12 capname="net_admin" [ 18.109712] audit: type=1400 audit(1713194859.088:76): apparmor="DENIED" operation="capable" class="cap" profile="/usr/lib/snapd/snap-confine" pid=996 comm="snap-confine" capability=38 capname="perfmon" [ 18.822632] Bluetooth: RFCOMM TTY layer initialized [ 18.822658] Bluetooth: RFCOMM socket layer initialized [ 18.822672] Bluetooth: RFCOMM ver 1.11 [ 20.276700] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7 [ 21.285354] rfkill: input handler disabled [ 21.416286] audit: type=1400 audit(1713194862.392:77): apparmor="DENIED" operation="capable" class="cap" profile="/usr/lib/snapd/snap-confine" pid=1479 comm="snap-confine" capability=12 capname="net_admin" [ 21.416351] audit: type=1400 audit(1713194862.392:78): apparmor="DENIED" operation="capable" class="cap" profile="/usr/lib/snapd/snap-confine" pid=1479 comm="snap-confine" capability=38 capname="perfmon" [ 21.947485] wlp1s0: authenticate with a0:ec:f9:b2:6a:5e [ 21.985955] wlp1s0: send auth to a0:ec:f9:b2:6a:5e (try 1/3) [ 21.987925] wlp1s0: authenticated [ 21.992346] wlp1s0: associate with a0:ec:f9:b2:6a:5e (try 1/3) [ 22.036833] wlp1s0: RX AssocResp from a0:ec:f9:b2:6a:5e (capab=0x1101 status=0 aid=87) [ 22.039011] wlp1s0: associated [ 22.039369] ath: EEPROM regdomain: 0x8348 [ 22.039376] ath: EEPROM indicates we should expect a country code [ 22.039380] ath: doing EEPROM country->regdmn map search [ 22.039383] ath: country maps to regdmn code: 0x3a [ 22.039387] ath: Country alpha2 being used: US [ 22.039390] ath: Regpair used: 0x3a [ 22.039394] ath: regdomain 0x8348 dynamically updated by country element [ 22.099679] wlp1s0: Limiting TX power to 17 dBm as advertised by a0:ec:f9:b2:6a:5e [ 25.078172] warning: `kgpg' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211 [ 26.240028] audit: type=1107 audit(1713194867.216:79): pid=548 uid=102 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_method_call" bus="system" path="/org/freedesktop/PolicyKit1/Authority" interface="org.freedesktop.DBus.Properties" member="GetAll" mask="send" name=":1.4" pid=1479 label="snap.snap-store.snap-store" peer_pid=563 peer_label="unconfined" exe="/usr/bin/dbus-daemon" sauid=102 hostname=? addr=? terminal=?' [ 26.240882] audit: type=1107 audit(1713194867.220:80): pid=548 uid=102 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_method_call" bus="system" path="/org/freedesktop/PolicyKit1/Authority" interface="org.freedesktop.PolicyKit1.Authority" member="CheckAuthorization" mask="send" name=":1.4" pid=1479 label="snap.snap-store.snap-store" peer_pid=563 peer_label="unconfined" exe="/usr/bin/dbus-daemon" sauid=102 hostname=? addr=? terminal=?' [ 26.246482] audit: type=1107 audit(1713194867.224:81): pid=548 uid=102 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_method_call" bus="system" path="/org/freedesktop/PolicyKit1/Authority" interface="org.freedesktop.DBus.Properties" member="GetAll" mask="send" name=":1.4" pid=1479 label="snap.snap-store.snap-store" peer_pid=563 peer_label="unconfined" exe="/usr/bin/dbus-daemon" sauid=102 hostname=? addr=? terminal=?' [ 26.247159] audit: type=1107 audit(1713194867.224:82): pid=548 uid=102 auid=4294967295 ses=4294967295 subj=unconfined msg='apparmor="DENIED" operation="dbus_method_call" bus="system" path="/org/freedesktop/PolicyKit1/Authority" interface="org.freedesktop.PolicyKit1.Authority" member="CheckAuthorization" mask="send" name=":1.4" pid=1479 label="snap.snap-store.snap-store" peer_pid=563 peer_label="unconfined" exe="/usr/bin/dbus-daemon" sauid=102 hostname=? addr=? terminal=?' [ 27.089921] audit: type=1400 audit(1713194868.068:83): apparmor="DENIED" operation="open" class="file" profile="snap.snap-store.snap-store" name="/etc/appstream.conf" pid=1479 comm="snap-store" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [ 27.977694] audit: type=1400 audit(1713194868.956:84): apparmor="STATUS" operation="profile_load" profile="unconfined" name="docker-default" pid=2076 comm="apparmor_parser" [ 28.130199] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 28.146581] Bridge firewalling registered [ 28.408491] Initializing XFRM netlink socket [ 58.692799] wlp1s0: disconnect from AP a0:ec:f9:b2:6a:5e for new auth to 28:ac:9e:11:73:0e [ 58.718773] wlp1s0: authenticate with 28:ac:9e:11:73:0e [ 58.754177] wlp1s0: send auth to 28:ac:9e:11:73:0e (try 1/3) [ 58.754983] wlp1s0: authenticated [ 58.764349] wlp1s0: associate with 28:ac:9e:11:73:0e (try 1/3) [ 58.767497] wlp1s0: RX ReassocResp from 28:ac:9e:11:73:0e (capab=0x1101 status=0 aid=61) [ 58.770618] wlp1s0: associated [ 58.771058] ath: EEPROM regdomain: 0x8348 [ 58.771066] ath: EEPROM indicates we should expect a country code [ 58.771074] ath: doing EEPROM country->regdmn map search [ 58.771079] ath: country maps to regdmn code: 0x3a [ 58.771085] ath: Country alpha2 being used: US [ 58.771090] ath: Regpair used: 0x3a [ 58.771095] ath: regdomain 0x8348 dynamically updated by country element [ 58.831005] wlp1s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 28:ac:9e:11:73:0e [ 89.602005] audit: type=1400 audit(1713194924.930:85): apparmor="DENIED" operation="capable" class="cap" profile="/usr/lib/snapd/snap-confine" pid=3007 comm="snap-confine" capability=12 capname="net_admin" [ 89.602024] audit: type=1400 audit(1713194924.930:86): apparmor="DENIED" operation="capable" class="cap" profile="/usr/lib/snapd/snap-confine" pid=3007 comm="snap-confine" capability=38 capname="perfmon" [ 95.496030] wlp1s0: disconnect from AP 28:ac:9e:11:73:0e for new auth to 28:ac:9e:11:73:01 [ 95.564075] wlp1s0: authenticate with 28:ac:9e:11:73:01 [ 95.564112] wlp1s0: 80 MHz not supported, disabling VHT [ 95.601887] wlp1s0: send auth to 28:ac:9e:11:73:01 (try 1/3) [ 95.627916] wlp1s0: authenticated [ 95.629971] wlp1s0: associate with 28:ac:9e:11:73:01 (try 1/3) [ 95.634971] wlp1s0: RX ReassocResp from 28:ac:9e:11:73:01 (capab=0x1421 status=0 aid=2) [ 95.637812] wlp1s0: associated [ 95.638330] ath: EEPROM regdomain: 0x8348 [ 95.638337] ath: EEPROM indicates we should expect a country code [ 95.638341] ath: doing EEPROM country->regdmn map search [ 95.638344] ath: country maps to regdmn code: 0x3a [ 95.638348] ath: Country alpha2 being used: US [ 95.638351] ath: Regpair used: 0x3a [ 95.638354] ath: regdomain 0x8348 dynamically updated by country element [ 95.659046] wlp1s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 28:ac:9e:11:73:01 [ 114.047270] audit: type=1400 audit(1713194949.374:87): apparmor="DENIED" operation="capable" class="cap" profile="/usr/lib/snapd/snap-confine" pid=3096 comm="snap-confine" capability=12 capname="net_admin" [ 114.403565] audit: type=1400 audit(1713194949.730:88): apparmor="DENIED" operation="capable" class="cap" profile="/usr/lib/snapd/snap-confine" pid=3171 comm="snap-confine" capability=12 capname="net_admin" [ 114.403602] audit: type=1400 audit(1713194949.730:89): apparmor="DENIED" operation="capable" class="cap" profile="/usr/lib/snapd/snap-confine" pid=3171 comm="snap-confine" capability=38 capname="perfmon" [ 132.237005] wlp1s0: disconnect from AP 28:ac:9e:11:73:01 for new auth to 28:ac:9e:11:73:0e [ 132.301127] wlp1s0: authenticate with 28:ac:9e:11:73:0e [ 132.337261] wlp1s0: send auth to 28:ac:9e:11:73:0e (try 1/3) [ 132.339035] wlp1s0: authenticated [ 132.346467] wlp1s0: associate with 28:ac:9e:11:73:0e (try 1/3) [ 132.349190] wlp1s0: RX ReassocResp from 28:ac:9e:11:73:0e (capab=0x1101 status=0 aid=58) [ 132.352367] wlp1s0: associated [ 132.352808] ath: EEPROM regdomain: 0x8348 [ 132.352816] ath: EEPROM indicates we should expect a country code [ 132.352819] ath: doing EEPROM country->regdmn map search [ 132.352822] ath: country maps to regdmn code: 0x3a [ 132.352825] ath: Country alpha2 being used: US [ 132.352829] ath: Regpair used: 0x3a [ 132.352833] ath: regdomain 0x8348 dynamically updated by country element [ 132.355186] wlp1s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 28:ac:9e:11:73:0e [ 168.982664] wlp1s0: disconnect from AP 28:ac:9e:11:73:0e for new auth to 28:ac:9e:11:73:01 [ 169.029547] wlp1s0: authenticate with 28:ac:9e:11:73:01 [ 169.029589] wlp1s0: 80 MHz not supported, disabling VHT [ 169.067294] wlp1s0: send auth to 28:ac:9e:11:73:01 (try 1/3) [ 169.075880] wlp1s0: authenticated [ 169.079106] wlp1s0: associate with 28:ac:9e:11:73:01 (try 1/3) [ 169.088154] wlp1s0: RX ReassocResp from 28:ac:9e:11:73:01 (capab=0x1421 status=0 aid=2) [ 169.091064] wlp1s0: associated [ 169.091628] ath: EEPROM regdomain: 0x8348 [ 169.091636] ath: EEPROM indicates we should expect a country code [ 169.091641] ath: doing EEPROM country->regdmn map search [ 169.091646] ath: country maps to regdmn code: 0x3a [ 169.091650] ath: Country alpha2 being used: US [ 169.091655] ath: Regpair used: 0x3a [ 169.091659] ath: regdomain 0x8348 dynamically updated by country element [ 169.487408] wlp1s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 28:ac:9e:11:73:01 [ 461.814575] wlp1s0: disconnect from AP 28:ac:9e:11:73:01 for new auth to a0:ec:f9:e0:fe:e1 [ 461.854703] wlp1s0: authenticate with a0:ec:f9:e0:fe:e1 [ 461.854748] wlp1s0: 80 MHz not supported, disabling VHT [ 461.889763] wlp1s0: send auth to a0:ec:f9:e0:fe:e1 (try 1/3) [ 461.891424] wlp1s0: authenticated [ 461.895332] wlp1s0: associate with a0:ec:f9:e0:fe:e1 (try 1/3) [ 461.898334] wlp1s0: RX ReassocResp from a0:ec:f9:e0:fe:e1 (capab=0x1421 status=0 aid=38) [ 461.900838] wlp1s0: associated [ 461.901098] ath: EEPROM regdomain: 0x8348 [ 461.901102] ath: EEPROM indicates we should expect a country code [ 461.901106] ath: doing EEPROM country->regdmn map search [ 461.901109] ath: country maps to regdmn code: 0x3a [ 461.901111] ath: Country alpha2 being used: US [ 461.901114] ath: Regpair used: 0x3a [ 461.901117] ath: regdomain 0x8348 dynamically updated by country element [ 461.908132] wlp1s0: Limiting TX power to 16 dBm as advertised by a0:ec:f9:e0:fe:e1 [ 474.700094] usb 2-2: new SuperSpeed USB device number 2 using xhci_hcd [ 474.720192] usb 2-2: New USB device found, idVendor=1058, idProduct=2620, bcdDevice=10.18 [ 474.720209] usb 2-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 474.720216] usb 2-2: Product: Elements 2620 [ 474.720223] usb 2-2: Manufacturer: Western Digital [ 474.720228] usb 2-2: SerialNumber: 575833314443394C35534C4B [ 474.768847] usb-storage 2-2:1.0: USB Mass Storage device detected [ 474.769204] scsi host1: usb-storage 2-2:1.0 [ 474.769477] usbcore: registered new interface driver usb-storage [ 474.790290] usbcore: registered new interface driver uas [ 475.788854] scsi 1:0:0:0: Direct-Access WD Elements 2620 1018 PQ: 0 ANSI: 6 [ 475.789494] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 475.790869] sd 1:0:0:0: [sda] Spinning up disk... [ 476.811964] ......ready [ 481.931864] sd 1:0:0:0: [sda] Very big device. Trying to use READ CAPACITY(16). [ 481.932027] sd 1:0:0:0: [sda] 7813969920 512-byte logical blocks: (4.00 TB/3.64 TiB) [ 481.932036] sd 1:0:0:0: [sda] 4096-byte physical blocks [ 481.932345] sd 1:0:0:0: [sda] Write Protect is off [ 481.932354] sd 1:0:0:0: [sda] Mode Sense: 47 00 10 08 [ 481.932717] sd 1:0:0:0: [sda] No Caching mode page found [ 481.932725] sd 1:0:0:0: [sda] Assuming drive cache: write through [ 482.108063] sda: sda1 [ 482.108567] sd 1:0:0:0: [sda] Attached SCSI disk [ 482.698771] ntfs3: Max link count 4000 [ 482.698786] ntfs3: Enabled Linux POSIX ACLs support [ 482.698790] ntfs3: Read-only LZX/Xpress compression included [ 482.701050] ntfs3: sda1: It is recommened to use chkdsk. [ 482.807936] ntfs3: sda1: volume is dirty and "force" flag is not set! [ 535.256779] wlp1s0: disconnect from AP a0:ec:f9:e0:fe:e1 for new auth to a0:ec:f9:b2:6a:5e [ 535.310362] wlp1s0: authenticate with a0:ec:f9:b2:6a:5e [ 535.346422] wlp1s0: send auth to a0:ec:f9:b2:6a:5e (try 1/3) [ 535.347165] wlp1s0: authenticated [ 535.359514] wlp1s0: associate with a0:ec:f9:b2:6a:5e (try 1/3) [ 535.361559] wlp1s0: RX ReassocResp from a0:ec:f9:b2:6a:5e (capab=0x1101 status=0 aid=88) [ 535.364367] wlp1s0: associated [ 535.364529] wlp1s0: Limiting TX power to 17 dBm as advertised by a0:ec:f9:b2:6a:5e [ 535.365019] ath: EEPROM regdomain: 0x8348 [ 535.365027] ath: EEPROM indicates we should expect a country code [ 535.365034] ath: doing EEPROM country->regdmn map search [ 535.365039] ath: country maps to regdmn code: 0x3a [ 535.365045] ath: Country alpha2 being used: US [ 535.365051] ath: Regpair used: 0x3a [ 535.365056] ath: regdomain 0x8348 dynamically updated by country element [ 682.043885] wlp1s0: disconnect from AP a0:ec:f9:b2:6a:5e for new auth to 28:ac:9e:11:73:0e [ 682.127641] wlp1s0: authenticate with 28:ac:9e:11:73:0e [ 682.163822] wlp1s0: send auth to 28:ac:9e:11:73:0e (try 1/3) [ 682.164652] wlp1s0: authenticated [ 682.172811] wlp1s0: associate with 28:ac:9e:11:73:0e (try 1/3) [ 682.175392] wlp1s0: RX ReassocResp from 28:ac:9e:11:73:0e (capab=0x1101 status=0 aid=73) [ 682.177948] wlp1s0: associated [ 682.178402] ath: EEPROM regdomain: 0x8348 [ 682.178410] ath: EEPROM indicates we should expect a country code [ 682.178416] ath: doing EEPROM country->regdmn map search [ 682.178421] ath: country maps to regdmn code: 0x3a [ 682.178426] ath: Country alpha2 being used: US [ 682.178431] ath: Regpair used: 0x3a [ 682.178436] ath: regdomain 0x8348 dynamically updated by country element [ 682.249524] wlp1s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 28:ac:9e:11:73:0e [ 718.863741] wlp1s0: disconnect from AP 28:ac:9e:11:73:0e for new auth to a0:ec:f9:e0:fe:ee [ 718.931609] wlp1s0: authenticate with a0:ec:f9:e0:fe:ee [ 718.971540] wlp1s0: send auth to a0:ec:f9:e0:fe:ee (try 1/3) [ 718.972489] wlp1s0: authenticated [ 718.981027] wlp1s0: associate with a0:ec:f9:e0:fe:ee (try 1/3) [ 718.983122] wlp1s0: RX ReassocResp from a0:ec:f9:e0:fe:ee (capab=0x1101 status=0 aid=148) [ 718.986103] wlp1s0: associated [ 718.986449] wlp1s0: Limiting TX power to 17 dBm as advertised by a0:ec:f9:e0:fe:ee [ 718.986946] ath: EEPROM regdomain: 0x8348 [ 718.986956] ath: EEPROM indicates we should expect a country code [ 718.986963] ath: doing EEPROM country->regdmn map search [ 718.986970] ath: country maps to regdmn code: 0x3a [ 718.986975] ath: Country alpha2 being used: US [ 718.986980] ath: Regpair used: 0x3a [ 718.986986] ath: regdomain 0x8348 dynamically updated by country element [ 755.612095] wlp1s0: disconnect from AP a0:ec:f9:e0:fe:ee for new auth to a0:ec:f9:b2:6a:5e [ 755.664039] wlp1s0: authenticate with a0:ec:f9:b2:6a:5e [ 755.699755] wlp1s0: send auth to a0:ec:f9:b2:6a:5e (try 1/3) [ 755.700470] wlp1s0: authenticated [ 755.701197] wlp1s0: associate with a0:ec:f9:b2:6a:5e (try 1/3) [ 755.703821] wlp1s0: RX ReassocResp from a0:ec:f9:b2:6a:5e (capab=0x1101 status=0 aid=88) [ 755.706613] wlp1s0: associated [ 755.707035] ath: EEPROM regdomain: 0x8348 [ 755.707042] ath: EEPROM indicates we should expect a country code [ 755.707047] ath: doing EEPROM country->regdmn map search [ 755.707051] ath: country maps to regdmn code: 0x3a [ 755.707056] ath: Country alpha2 being used: US [ 755.707060] ath: Regpair used: 0x3a [ 755.707064] ath: regdomain 0x8348 dynamically updated by country element [ 755.750328] wlp1s0: Limiting TX power to 17 dBm as advertised by a0:ec:f9:b2:6a:5e [ 829.007469] wlp1s0: disconnect from AP a0:ec:f9:b2:6a:5e for new auth to a0:ec:f9:e0:fe:ee [ 829.067709] wlp1s0: authenticate with a0:ec:f9:e0:fe:ee [ 829.107082] wlp1s0: send auth to a0:ec:f9:e0:fe:ee (try 1/3) [ 829.107784] wlp1s0: authenticated [ 829.109586] wlp1s0: associate with a0:ec:f9:e0:fe:ee (try 1/3) [ 829.111506] wlp1s0: RX ReassocResp from a0:ec:f9:e0:fe:ee (capab=0x1101 status=0 aid=153) [ 829.114030] wlp1s0: associated [ 829.114329] ath: EEPROM regdomain: 0x8348 [ 829.114337] ath: EEPROM indicates we should expect a country code [ 829.114343] ath: doing EEPROM country->regdmn map search [ 829.114349] ath: country maps to regdmn code: 0x3a [ 829.114354] ath: Country alpha2 being used: US [ 829.114359] ath: Regpair used: 0x3a [ 829.114364] ath: regdomain 0x8348 dynamically updated by country element [ 829.179944] wlp1s0: Limiting TX power to 17 dBm as advertised by a0:ec:f9:e0:fe:ee [ 939.089929] wlp1s0: disconnect from AP a0:ec:f9:e0:fe:ee for new auth to a0:ec:f9:b2:6a:5e [ 939.152301] wlp1s0: authenticate with a0:ec:f9:b2:6a:5e [ 939.187922] wlp1s0: send auth to a0:ec:f9:b2:6a:5e (try 1/3) [ 939.188555] wlp1s0: authenticated [ 939.193936] wlp1s0: associate with a0:ec:f9:b2:6a:5e (try 1/3) [ 939.195849] wlp1s0: RX ReassocResp from a0:ec:f9:b2:6a:5e (capab=0x1101 status=0 aid=92) [ 939.198105] wlp1s0: associated [ 939.198466] ath: EEPROM regdomain: 0x8348 [ 939.198472] ath: EEPROM indicates we should expect a country code [ 939.198476] ath: doing EEPROM country->regdmn map search [ 939.198479] ath: country maps to regdmn code: 0x3a [ 939.198482] ath: Country alpha2 being used: US [ 939.198485] ath: Regpair used: 0x3a [ 939.198488] ath: regdomain 0x8348 dynamically updated by country element [ 939.267763] wlp1s0: Limiting TX power to 17 dBm as advertised by a0:ec:f9:b2:6a:5e [ 975.865496] wlp1s0: disconnect from AP a0:ec:f9:b2:6a:5e for new auth to a0:ec:f9:e0:fe:e1 [ 975.924872] wlp1s0: authenticate with a0:ec:f9:e0:fe:e1 [ 975.924904] wlp1s0: 80 MHz not supported, disabling VHT [ 975.959937] wlp1s0: send auth to a0:ec:f9:e0:fe:e1 (try 1/3) [ 975.964795] wlp1s0: send auth to a0:ec:f9:e0:fe:e1 (try 2/3) [ 975.969571] wlp1s0: authenticated [ 975.970119] wlp1s0: associate with a0:ec:f9:e0:fe:e1 (try 1/3) [ 975.982365] wlp1s0: RX ReassocResp from a0:ec:f9:e0:fe:e1 (capab=0x1421 status=0 aid=37) [ 975.985656] wlp1s0: associated [ 975.986172] ath: EEPROM regdomain: 0x8348 [ 975.986183] ath: EEPROM indicates we should expect a country code [ 975.986190] ath: doing EEPROM country->regdmn map search [ 975.986196] ath: country maps to regdmn code: 0x3a [ 975.986202] ath: Country alpha2 being used: US [ 975.986207] ath: Regpair used: 0x3a [ 975.986213] ath: regdomain 0x8348 dynamically updated by country element [ 976.110375] wlp1s0: Limiting TX power to 16 dBm as advertised by a0:ec:f9:e0:fe:e1 [ 1232.670257] wlp1s0: disconnect from AP a0:ec:f9:e0:fe:e1 for new auth to a0:ec:f9:b2:6a:5e [ 1232.717965] wlp1s0: authenticate with a0:ec:f9:b2:6a:5e [ 1232.753999] wlp1s0: send auth to a0:ec:f9:b2:6a:5e (try 1/3) [ 1232.754683] wlp1s0: authenticated [ 1232.763125] wlp1s0: associate with a0:ec:f9:b2:6a:5e (try 1/3) [ 1232.765214] wlp1s0: RX ReassocResp from a0:ec:f9:b2:6a:5e (capab=0x1101 status=0 aid=92) [ 1232.768116] wlp1s0: associated [ 1232.768551] ath: EEPROM regdomain: 0x8348 [ 1232.768562] ath: EEPROM indicates we should expect a country code [ 1232.768569] ath: doing EEPROM country->regdmn map search [ 1232.768576] ath: country maps to regdmn code: 0x3a [ 1232.768582] ath: Country alpha2 being used: US [ 1232.768587] ath: Regpair used: 0x3a [ 1232.768593] ath: regdomain 0x8348 dynamically updated by country element [ 1232.769467] wlp1s0: Limiting TX power to 17 dBm as advertised by a0:ec:f9:b2:6a:5e [ 1582.266624] capability: warning: `proftpd' uses 32-bit capabilities (legacy support in use) [ 2692.545028] audit: type=1400 audit(1713197527.857:90): apparmor="DENIED" operation="capable" class="cap" profile="/usr/lib/snapd/snap-confine" pid=13020 comm="snap-confine" capability=12 capname="net_admin" [ 2692.545063] audit: type=1400 audit(1713197527.857:91): apparmor="DENIED" operation="capable" class="cap" profile="/usr/lib/snapd/snap-confine" pid=13020 comm="snap-confine" capability=38 capname="perfmon" [ 3712.497915] wlp1s0: disassociated from a0:ec:f9:b2:6a:5e (Reason: 1=UNSPECIFIED) [ 3717.507426] wlp1s0: authenticate with 28:ac:9e:11:73:0e [ 3717.543097] wlp1s0: send auth to 28:ac:9e:11:73:0e (try 1/3) [ 3717.544925] wlp1s0: authenticated [ 3717.560485] wlp1s0: associate with 28:ac:9e:11:73:0e (try 1/3) [ 3717.570303] wlp1s0: RX AssocResp from 28:ac:9e:11:73:0e (capab=0x1101 status=0 aid=153) [ 3717.572997] wlp1s0: associated [ 3717.573478] ath: EEPROM regdomain: 0x8348 [ 3717.573489] ath: EEPROM indicates we should expect a country code [ 3717.573496] ath: doing EEPROM country->regdmn map search [ 3717.573502] ath: country maps to regdmn code: 0x3a [ 3717.573508] ath: Country alpha2 being used: US [ 3717.573514] ath: Regpair used: 0x3a [ 3717.573520] ath: regdomain 0x8348 dynamically updated by country element [ 3717.624646] wlp1s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 28:ac:9e:11:73:0e [ 3900.628644] wlp1s0: disconnect from AP 28:ac:9e:11:73:0e for new auth to a0:ec:f9:e0:fe:ee [ 3900.676160] wlp1s0: authenticate with a0:ec:f9:e0:fe:ee [ 3900.715436] wlp1s0: send auth to a0:ec:f9:e0:fe:ee (try 1/3) [ 3900.716123] wlp1s0: authenticated [ 3900.717322] wlp1s0: associate with a0:ec:f9:e0:fe:ee (try 1/3) [ 3900.719089] wlp1s0: RX ReassocResp from a0:ec:f9:e0:fe:ee (capab=0x1101 status=0 aid=56) [ 3900.721797] wlp1s0: associated [ 3900.722202] ath: EEPROM regdomain: 0x8348 [ 3900.722221] ath: EEPROM indicates we should expect a country code [ 3900.722227] ath: doing EEPROM country->regdmn map search [ 3900.722231] ath: country maps to regdmn code: 0x3a [ 3900.722236] ath: Country alpha2 being used: US [ 3900.722241] ath: Regpair used: 0x3a [ 3900.722246] ath: regdomain 0x8348 dynamically updated by country element [ 3900.812005] wlp1s0: Limiting TX power to 17 dBm as advertised by a0:ec:f9:e0:fe:ee [ 4010.718217] wlp1s0: disconnect from AP a0:ec:f9:e0:fe:ee for new auth to 28:ac:9e:11:73:0e [ 4010.769405] wlp1s0: authenticate with 28:ac:9e:11:73:0e [ 4010.805072] wlp1s0: send auth to 28:ac:9e:11:73:0e (try 1/3) [ 4010.805894] wlp1s0: authenticated [ 4010.813772] wlp1s0: associate with 28:ac:9e:11:73:0e (try 1/3) [ 4010.816528] wlp1s0: RX ReassocResp from 28:ac:9e:11:73:0e (capab=0x1101 status=0 aid=162) [ 4010.819235] wlp1s0: associated [ 4010.819869] ath: EEPROM regdomain: 0x8348 [ 4010.819878] ath: EEPROM indicates we should expect a country code [ 4010.819884] ath: doing EEPROM country->regdmn map search [ 4010.819889] ath: country maps to regdmn code: 0x3a [ 4010.819894] ath: Country alpha2 being used: US [ 4010.819899] ath: Regpair used: 0x3a [ 4010.819904] ath: regdomain 0x8348 dynamically updated by country element [ 4010.902033] wlp1s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 28:ac:9e:11:73:0e [ 4047.457243] wlp1s0: disconnect from AP 28:ac:9e:11:73:0e for new auth to a0:ec:f9:b2:6a:5e [ 4047.508473] wlp1s0: authenticate with a0:ec:f9:b2:6a:5e [ 4047.544896] wlp1s0: send auth to a0:ec:f9:b2:6a:5e (try 1/3) [ 4047.546205] wlp1s0: send auth to a0:ec:f9:b2:6a:5e (try 2/3) [ 4047.550004] wlp1s0: authenticated [ 4047.553941] wlp1s0: associate with a0:ec:f9:b2:6a:5e (try 1/3) [ 4047.555847] wlp1s0: RX ReassocResp from a0:ec:f9:b2:6a:5e (capab=0x1101 status=0 aid=185) [ 4047.558735] wlp1s0: associated [ 4047.559190] ath: EEPROM regdomain: 0x8348 [ 4047.559214] ath: EEPROM indicates we should expect a country code [ 4047.559220] ath: doing EEPROM country->regdmn map search [ 4047.559225] ath: country maps to regdmn code: 0x3a [ 4047.559230] ath: Country alpha2 being used: US [ 4047.559235] ath: Regpair used: 0x3a [ 4047.559240] ath: regdomain 0x8348 dynamically updated by country element [ 4047.674173] wlp1s0: Limiting TX power to 17 dBm as advertised by a0:ec:f9:b2:6a:5e [ 4194.135072] wlp1s0: disconnect from AP a0:ec:f9:b2:6a:5e for new auth to a0:ec:f9:e0:fe:ee [ 4194.190128] wlp1s0: authenticate with a0:ec:f9:e0:fe:ee [ 4194.229385] wlp1s0: send auth to a0:ec:f9:e0:fe:ee (try 1/3) [ 4194.230137] wlp1s0: authenticated [ 4194.231422] wlp1s0: associate with a0:ec:f9:e0:fe:ee (try 1/3) [ 4194.233499] wlp1s0: RX ReassocResp from a0:ec:f9:e0:fe:ee (capab=0x1101 status=0 aid=65) [ 4194.236301] wlp1s0: associated [ 4194.236624] ath: EEPROM regdomain: 0x8348 [ 4194.236632] ath: EEPROM indicates we should expect a country code [ 4194.236637] ath: doing EEPROM country->regdmn map search [ 4194.236642] ath: country maps to regdmn code: 0x3a [ 4194.236646] ath: Country alpha2 being used: US [ 4194.236651] ath: Regpair used: 0x3a [ 4194.236656] ath: regdomain 0x8348 dynamically updated by country element [ 4194.313373] wlp1s0: Limiting TX power to 17 dBm as advertised by a0:ec:f9:e0:fe:ee [ 4267.572042] wlp1s0: disconnect from AP a0:ec:f9:e0:fe:ee for new auth to 28:ac:9e:11:73:0e [ 4267.647241] wlp1s0: authenticate with 28:ac:9e:11:73:0e [ 4267.682961] wlp1s0: send auth to 28:ac:9e:11:73:0e (try 1/3) [ 4267.683795] wlp1s0: authenticated [ 4267.688371] wlp1s0: associate with 28:ac:9e:11:73:0e (try 1/3) [ 4267.691407] wlp1s0: RX ReassocResp from 28:ac:9e:11:73:0e (capab=0x1101 status=0 aid=169) [ 4267.693836] wlp1s0: associated [ 4267.694181] ath: EEPROM regdomain: 0x8348 [ 4267.694190] ath: EEPROM indicates we should expect a country code [ 4267.694196] ath: doing EEPROM country->regdmn map search [ 4267.694200] ath: country maps to regdmn code: 0x3a [ 4267.694204] ath: Country alpha2 being used: US [ 4267.694208] ath: Regpair used: 0x3a [ 4267.694212] ath: regdomain 0x8348 dynamically updated by country element [ 4267.723740] wlp1s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 28:ac:9e:11:73:0e [ 4304.351238] wlp1s0: disconnect from AP 28:ac:9e:11:73:0e for new auth to a0:ec:f9:b2:6a:5e [ 4304.403184] wlp1s0: authenticate with a0:ec:f9:b2:6a:5e [ 4304.438776] wlp1s0: send auth to a0:ec:f9:b2:6a:5e (try 1/3) [ 4304.440043] wlp1s0: authenticated [ 4304.444831] wlp1s0: associate with a0:ec:f9:b2:6a:5e (try 1/3) [ 4304.446837] wlp1s0: RX ReassocResp from a0:ec:f9:b2:6a:5e (capab=0x1101 status=0 aid=198) [ 4304.449682] wlp1s0: associated [ 4304.450161] ath: EEPROM regdomain: 0x8348 [ 4304.450173] ath: EEPROM indicates we should expect a country code [ 4304.450180] ath: doing EEPROM country->regdmn map search [ 4304.450185] ath: country maps to regdmn code: 0x3a [ 4304.450190] ath: Country alpha2 being used: US [ 4304.450196] ath: Regpair used: 0x3a [ 4304.450201] ath: regdomain 0x8348 dynamically updated by country element [ 4304.514617] wlp1s0: Limiting TX power to 17 dBm as advertised by a0:ec:f9:b2:6a:5e [ 4854.369323] wlp1s0: disconnect from AP a0:ec:f9:b2:6a:5e for new auth to 28:ac:9e:11:73:0e [ 4854.428408] wlp1s0: authenticate with 28:ac:9e:11:73:0e [ 4854.463699] wlp1s0: send auth to 28:ac:9e:11:73:0e (try 1/3) [ 4854.464459] wlp1s0: authenticated [ 4854.466047] wlp1s0: associate with 28:ac:9e:11:73:0e (try 1/3) [ 4854.468664] wlp1s0: RX ReassocResp from 28:ac:9e:11:73:0e (capab=0x1101 status=0 aid=195) [ 4854.471316] wlp1s0: associated [ 4854.471696] ath: EEPROM regdomain: 0x8348 [ 4854.471706] ath: EEPROM indicates we should expect a country code [ 4854.471713] ath: doing EEPROM country->regdmn map search [ 4854.471719] ath: country maps to regdmn code: 0x3a [ 4854.471725] ath: Country alpha2 being used: US [ 4854.471730] ath: Regpair used: 0x3a [ 4854.471736] ath: regdomain 0x8348 dynamically updated by country element [ 4854.482391] wlp1s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 28:ac:9e:11:73:0e [ 4927.721485] wlp1s0: disconnect from AP 28:ac:9e:11:73:0e for new auth to a0:ec:f9:b2:6a:5e [ 4927.793291] wlp1s0: authenticate with a0:ec:f9:b2:6a:5e [ 4927.830069] wlp1s0: send auth to a0:ec:f9:b2:6a:5e (try 1/3) [ 4927.843258] wlp1s0: authenticated [ 4927.846574] wlp1s0: associate with a0:ec:f9:b2:6a:5e (try 1/3) [ 4927.856398] wlp1s0: RX ReassocResp from a0:ec:f9:b2:6a:5e (capab=0x1101 status=0 aid=23) [ 4927.859448] wlp1s0: associated [ 4927.859858] ath: EEPROM regdomain: 0x8348 [ 4927.859867] ath: EEPROM indicates we should expect a country code [ 4927.859873] ath: doing EEPROM country->regdmn map search [ 4927.859878] ath: country maps to regdmn code: 0x3a [ 4927.859882] ath: Country alpha2 being used: US [ 4927.859887] ath: Regpair used: 0x3a [ 4927.859891] ath: regdomain 0x8348 dynamically updated by country element [ 4927.867411] wlp1s0: Limiting TX power to 17 dBm as advertised by a0:ec:f9:b2:6a:5e [ 7180.702229] perf: interrupt took too long (2501 > 2500), lowering kernel.perf_event_max_sample_rate to 79750 [ 7394.453747] wlp1s0: disassociated from a0:ec:f9:b2:6a:5e (Reason: 1=UNSPECIFIED) [ 7399.504356] wlp1s0: authenticate with a0:ec:f9:e0:fe:e1 [ 7399.504408] wlp1s0: 80 MHz not supported, disabling VHT [ 7399.539210] wlp1s0: send auth to a0:ec:f9:e0:fe:e1 (try 1/3) [ 7399.541567] wlp1s0: authenticated [ 7399.546932] wlp1s0: associate with a0:ec:f9:e0:fe:e1 (try 1/3) [ 7399.563545] wlp1s0: RX AssocResp from a0:ec:f9:e0:fe:e1 (capab=0x1421 status=0 aid=55) [ 7399.566163] wlp1s0: associated [ 7399.566546] ath: EEPROM regdomain: 0x8348 [ 7399.566557] ath: EEPROM indicates we should expect a country code [ 7399.566564] ath: doing EEPROM country->regdmn map search [ 7399.566570] ath: country maps to regdmn code: 0x3a [ 7399.566576] ath: Country alpha2 being used: US [ 7399.566581] ath: Regpair used: 0x3a [ 7399.566587] ath: regdomain 0x8348 dynamically updated by country element [ 7399.615579] wlp1s0: Limiting TX power to 16 dBm as advertised by a0:ec:f9:e0:fe:e1 [ 7436.256290] wlp1s0: disconnect from AP a0:ec:f9:e0:fe:e1 for new auth to a0:ec:f9:b2:6a:5e [ 7436.293788] wlp1s0: authenticate with a0:ec:f9:b2:6a:5e [ 7436.329695] wlp1s0: send auth to a0:ec:f9:b2:6a:5e (try 1/3) [ 7436.330375] wlp1s0: authenticated [ 7436.343158] wlp1s0: associate with a0:ec:f9:b2:6a:5e (try 1/3) [ 7436.345043] wlp1s0: RX ReassocResp from a0:ec:f9:b2:6a:5e (capab=0x1101 status=0 aid=67) [ 7436.347369] wlp1s0: associated [ 7436.348096] ath: EEPROM regdomain: 0x8348 [ 7436.348105] ath: EEPROM indicates we should expect a country code [ 7436.348108] ath: doing EEPROM country->regdmn map search [ 7436.348110] ath: country maps to regdmn code: 0x3a [ 7436.348112] ath: Country alpha2 being used: US [ 7436.348114] ath: Regpair used: 0x3a [ 7436.348117] ath: regdomain 0x8348 dynamically updated by country element [ 7436.423578] wlp1s0: Limiting TX power to 17 dBm as advertised by a0:ec:f9:b2:6a:5e