[ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.8.0 (root@puchatek) (gcc version 4.8.0 (GCC) ) #2 Mon May 13 08:49:07 CEST 2013 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine: SAMSUNG EXYNOS5 (Flattened Device Tree), model: Google Snow [ 0.000000] Ramoops: 41f00000 - 41ffffff [ 0.000000] Memory policy: ECC disabled, Data cache writeback [ 0.000000] CPU EXYNOS5250 (id 0x43520010) [ 0.000000] exynos5_init_clocks: initializing clocks [ 0.000000] S3C24XX Clocks, Copyright 2004 Simtec Electronics [ 0.000000] exynos5_setup_clocks: registering clocks [ 0.000000] exynos5_setup_clocks: xtal is 24000000 [ 0.000000] EXYNOS5: PLL settings, A=1700000000, B=800000000, C=333000000 [ 0.000000] M=1600000000, E=96000000 V=300000000 G=533000000 [ 0.000000] EXYNOS5: ARMCLK=1700000000, CDREX=800000000, ACLK400G3D=533000000 [ 0.000000] ACLK333=333000000, ACLK266=266666666, ACLK200=200000000 [ 0.000000] ACLK166=166500000, ACLK66=66666666 [ 0.000000] aclk_266_gscl: source is aclk_266 (1), rate is 266666666 [ 0.000000] sclk_g3d: source is mout_mpll_user (0), rate is 800000000 [ 0.000000] sclk_sata: source is mout_mpll_user (0), rate is 66666666 [ 0.000000] sclk_gscl_wrap: source is ext_xtal (0), rate is 24000000 [ 0.000000] sclk_gscl_wrap: source is ext_xtal (0), rate is 24000000 [ 0.000000] sclk_cam0: source is ext_xtal (0), rate is 24000000 [ 0.000000] sclk_cam1: source is ext_xtal (0), rate is 24000000 [ 0.000000] sclk_usbdrd30: source is mout_mpll (0), rate is 66666666 [ 0.000000] On node 0 totalpages: 519936 [ 0.000000] Normal zone: 3568 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 448784 pages, LIFO batch:31 [ 0.000000] HighMem zone: 528 pages used for memmap [ 0.000000] HighMem zone: 67056 pages, LIFO batch:15 [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: at arch/arm/kernel/devtree.c:144 arm_dt_init_cpu_maps+0xbc/0x144() [ 0.000000] DT /cpu 2 nodes greater than max cores 1, capping them [ 0.000000] Modules linked in: [ 0.000000] [<80014f18>] (unwind_backtrace+0x0/0xec) from [<80501ccc>] (dump_stack+0x20/0x24) [ 0.000000] [<80501ccc>] (dump_stack+0x20/0x24) from [<800268d8>] (warn_slowpath_common+0x5c/0x74) [ 0.000000] [<800268d8>] (warn_slowpath_common+0x5c/0x74) from [<80026930>] (warn_slowpath_fmt+0x40/0x48) [ 0.000000] [<80026930>] (warn_slowpath_fmt+0x40/0x48) from [<80721f80>] (arm_dt_init_cpu_maps+0xbc/0x144) [ 0.000000] [<80721f80>] (arm_dt_init_cpu_maps+0xbc/0x144) from [<80721404>] (setup_arch+0x52c/0x60c) [ 0.000000] [<80721404>] (setup_arch+0x52c/0x60c) from [<8071d5ec>] (start_kernel+0xb0/0x3b0) [ 0.000000] [<8071d5ec>] (start_kernel+0xb0/0x3b0) from [<40008074>] (0x40008074) [ 0.000000] ---[ end trace da227214a82491b7 ]--- [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 515840 [ 0.000000] Kernel command line: cros_secure console= console=tty1 printk.time=1 nosplash rootwait root=/dev/mmcblk0p7 rw loglevel=9 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 262144 (order: 8, 1048576 bytes) [ 0.000000] Inode-cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] Memory: 31MB 16MB 216MB 1768MB = 2031MB total [ 0.000000] Memory: 2052976k/2070384k available, 26768k reserved, 270336K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0x80000000 - 0xef800000 (1784 MB) [ 0.000000] pkmap : 0x7fe00000 - 0x80000000 ( 2 MB) [ 0.000000] modules : 0x7f000000 - 0x7fe00000 ( 14 MB) [ 0.000000] .text : 0x80008000 - 0x8071ce78 (7252 kB) [ 0.000000] .init : 0x8071d000 - 0x8075f33c ( 265 kB) [ 0.000000] .data : 0x80760000 - 0x807cfc48 ( 448 kB) [ 0.000000] .bss : 0x807cfc48 - 0x8085a100 ( 554 kB) [ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:549 [ 0.000000] Initial usec timer 8841143 [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] console [tty1] enabled [ 0.000576] Calibrating delay loop... 1694.10 BogoMIPS (lpj=4235264) [ 0.045045] pid_max: default: 32768 minimum: 301 [ 0.045119] Security Framework initialized [ 0.045143] AppArmor: AppArmor initialized [ 0.045174] Mount-cache hash table entries: 512 [ 0.049689] Initializing cgroup subsys freezer [ 0.049719] CPU: Testing write buffer coherency: ok [ 0.049743] ftrace: allocating 21121 entries in 62 pages [ 0.066995] Setting up static identity map for 0x40508ac0 - 0x40508b18 [ 0.067479] devtmpfs: initialized [ 0.070937] pinctrl core: initialized pinctrl subsystem [ 0.071099] regulator-dummy: no parameters [ 0.071216] NET: Registered protocol family 16 [ 0.071354] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.071705] gpio_request: gpio-180 (lcd_bl_en) status -517 [ 0.071910] gpiochip_add: registered GPIOs 0 to 7 on device: gpa0 [ 0.071944] gpiochip_add: registered GPIOs 8 to 13 on device: gpa1 [ 0.071980] gpiochip_add: registered GPIOs 14 to 21 on device: gpa2 [ 0.072012] gpiochip_add: registered GPIOs 22 to 26 on device: gpb0 [ 0.072043] gpiochip_add: registered GPIOs 27 to 31 on device: gpb1 [ 0.072078] gpiochip_add: registered GPIOs 32 to 35 on device: gpb2 [ 0.072110] gpiochip_add: registered GPIOs 36 to 39 on device: gpb3 [ 0.072141] gpiochip_add: registered GPIOs 40 to 46 on device: gpc0 [ 0.072172] gpiochip_add: registered GPIOs 47 to 50 on device: gpc1 [ 0.072206] gpiochip_add: registered GPIOs 51 to 57 on device: gpc2 [ 0.072237] gpiochip_add: registered GPIOs 58 to 64 on device: gpc3 [ 0.072269] gpiochip_add: registered GPIOs 65 to 68 on device: gpd0 [ 0.072303] gpiochip_add: registered GPIOs 69 to 76 on device: gpd1 [ 0.072336] gpiochip_add: registered GPIOs 77 to 83 on device: gpc4 [ 0.072367] gpiochip_add: registered GPIOs 84 to 89 on device: gpy0 [ 0.072401] gpiochip_add: registered GPIOs 90 to 93 on device: gpy1 [ 0.072435] gpiochip_add: registered GPIOs 94 to 99 on device: gpy2 [ 0.072467] gpiochip_add: registered GPIOs 100 to 107 on device: gpy3 [ 0.072501] gpiochip_add: registered GPIOs 108 to 115 on device: gpy4 [ 0.072533] gpiochip_add: registered GPIOs 116 to 123 on device: gpy5 [ 0.072564] gpiochip_add: registered GPIOs 124 to 131 on device: gpy6 [ 0.072601] gpiochip_add: registered GPIOs 132 to 139 on device: gpx0 [ 0.072633] gpiochip_add: registered GPIOs 140 to 147 on device: gpx1 [ 0.072664] gpiochip_add: registered GPIOs 148 to 155 on device: gpx2 [ 0.072696] gpiochip_add: registered GPIOs 156 to 163 on device: gpx3 [ 0.073319] gpiochip_add: registered GPIOs 164 to 171 on device: gpe0 [ 0.073354] gpiochip_add: registered GPIOs 172 to 173 on device: gpe1 [ 0.073386] gpiochip_add: registered GPIOs 174 to 177 on device: gpf0 [ 0.073423] gpiochip_add: registered GPIOs 178 to 181 on device: gpf1 [ 0.073456] gpiochip_add: registered GPIOs 182 to 189 on device: gpg0 [ 0.073488] gpiochip_add: registered GPIOs 190 to 197 on device: gpg1 [ 0.073521] gpiochip_add: registered GPIOs 198 to 199 on device: gpg2 [ 0.073556] gpiochip_add: registered GPIOs 200 to 203 on device: gph0 [ 0.073588] gpiochip_add: registered GPIOs 204 to 211 on device: gph1 [ 0.073844] gpiochip_add: registered GPIOs 212 to 219 on device: gpv0 [ 0.073881] gpiochip_add: registered GPIOs 220 to 227 on device: gpv1 [ 0.073914] gpiochip_add: registered GPIOs 228 to 235 on device: gpv2 [ 0.073947] gpiochip_add: registered GPIOs 236 to 243 on device: gpv3 [ 0.073985] gpiochip_add: registered GPIOs 244 to 245 on device: gpv4 [ 0.074183] gpiochip_add: registered GPIOs 246 to 252 on device: gpz [ 0.080188] console [pstore-1] enabled [ 0.080200] ramoops: attached 0x100000@0x41f00000, ecc: 0 [ 0.080627] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.080641] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.080651] S3C Power Management, Copyright 2004 Simtec Electronics [ 0.085027] EXYNOS5250 PMU Initialize [ 0.085037] EXYNOS: Initializing architecture [ 0.085134] s3c24xx-pwm s3c24xx-pwm.0: tin at 33333333, tdiv at 33333333, tin=divclk, base 0 [ 0.087175] bio: create slab at 0 [ 0.087384] of_get_named_gpio_flags exited with status 147 [ 0.087439] codec-en: no parameters [ 0.087489] of_get_named_gpio_flags exited with status 133 [ 0.087536] wifi-en: no parameters [ 0.087584] of_get_named_gpio_flags exited with status 134 [ 0.087633] wifi-rst-l: no parameters [ 0.087690] of_get_named_gpio_flags exited with status 172 [ 0.087740] hsichub-reset-l: no parameters [ 0.087782] of_get_named_gpio_flags: can't parse gpios property [ 0.087827] vbat-supply: no parameters [ 0.088129] SCSI subsystem initialized [ 0.088500] of_get_named_gpio_flags exited with status 19 [ 0.088689] usbcore: registered new interface driver usbfs [ 0.088719] usbcore: registered new interface driver hub [ 0.088769] usbcore: registered new device driver usb [ 0.088902] s3c-i2c s3c2440-i2c.0: slave address 0x00 [ 0.088917] s3c-i2c s3c2440-i2c.0: bus frequency set to 378 KHz [ 0.089313] max77686 0-0009: device found [ 0.094436] max77686 0-0009: no op_mode property property at LDO4 [ 0.094458] max77686 0-0009: no op_mode property property at LDO5 [ 0.094478] max77686 0-0009: no op_mode property property at LDO6 [ 0.094522] max77686 0-0009: no op_mode property property at LDO9 [ 0.094553] max77686 0-0009: no op_mode property property at LDO11 [ 0.094584] max77686 0-0009: no op_mode property property at LDO13 [ 0.094639] max77686 0-0009: no op_mode property property at LDO17 [ 0.094657] max77686 0-0009: no op_mode property property at LDO18 [ 0.094675] max77686 0-0009: no op_mode property property at LDO19 [ 0.094694] max77686 0-0009: no op_mode property property at LDO20 [ 0.094712] max77686 0-0009: no op_mode property property at LDO21 [ 0.094730] max77686 0-0009: no op_mode property property at LDO22 [ 0.094748] max77686 0-0009: no op_mode property property at LDO23 [ 0.094766] max77686 0-0009: no op_mode property property at LDO24 [ 0.094785] max77686 0-0009: no op_mode property property at LDO25 [ 0.094803] max77686 0-0009: no op_mode property property at LDO26 [ 0.094920] max77686 0-0009: no op_mode property property at BUCK9 [ 0.094941] max77686 0-0009: no op_mode property property at EN32KHZ_AP [ 0.094963] max77686 0-0009: no op_mode property property at EN32KHZ_CP [ 0.094984] max77686 0-0009: no op_mode property property at P32KHZ [ 0.095788] P1.0V_LDO_OUT1: 1000 mV [ 0.096835] P1.8V_LDO_OUT2: 1800 mV [ 0.097774] P1.8V_LDO_OUT3: 1800 mV [ 0.098104] LDO4: at 2800 mV [ 0.098431] LDO5: at 1800 mV [ 0.098759] LDO6: at 1100 mV [ 0.099699] P1.1V_LDO_OUT7: 1100 mV [ 0.100544] P1.0V_LDO_OUT8: 1000 mV [ 0.100872] LDO9: at 1800 mV [ 0.101719] P1.8V_LDO_OUT10: 1800 mV [ 0.102046] LDO11: at 1900 mV [ 0.102986] P3.0V_LDO_OUT12: 3000 mV [ 0.103315] LDO13: at 1800 mV [ 0.104347] P1.8V_LDO_OUT14: 1800 mV [ 0.105292] P1.0V_LDO_OUT15: 1000 mV [ 0.106230] P1.8V_LDO_OUT16: 1800 mV [ 0.106562] LDO17: at 1200 mV [ 0.106889] LDO18: at 1800 mV [ 0.107219] LDO19: at 1800 mV [ 0.107549] LDO20: at 1800 mV [ 0.107877] LDO21: at 2800 mV [ 0.108206] LDO22: at 2800 mV [ 0.108530] LDO23: at 3000 mV [ 0.108858] LDO24: at 3000 mV [ 0.109186] LDO25: at 3000 mV [ 0.109526] LDO26: at 3000 mV [ 0.110085] vdd_mif: 950 <--> 1300 mV at 1000 mV [ 0.110545] vdd_arm: 850 <--> 1350 mV at 1300 mV [ 0.111000] vdd_int: 900 <--> 1200 mV at 1012 mV [ 0.111464] vdd_g3d: 850 <--> 1300 mV at 1200 mV [ 0.112302] P1.8V_BUCK_OUT5: 1800 mV [ 0.113146] P1.35V_BUCK_OUT6: 1350 mV [ 0.113991] P2.0V_BUCK_OUT7: 2000 mV [ 0.114836] P2.85V_BUCK_OUT8: 2850 mV [ 0.115173] BUCK9: at 1200 mV [ 0.115496] en32khz_ap: no parameters [ 0.115691] en32khz_cp: no parameters [ 0.115879] p32khz: no parameters [ 0.115952] s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter [ 0.116038] s3c-i2c s3c2440-i2c.1: slave address 0x00 [ 0.116053] s3c-i2c s3c2440-i2c.1: bus frequency set to 378 KHz [ 0.116282] s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter [ 0.116353] s3c-i2c s3c2440-i2c.2: slave address 0x00 [ 0.116368] s3c-i2c s3c2440-i2c.2: bus frequency set to 65 KHz [ 0.116553] s3c-i2c s3c2440-i2c.2: i2c-2: S3C I2C adapter [ 0.116621] s3c-i2c s3c2440-i2c.3: slave address 0x00 [ 0.116636] s3c-i2c s3c2440-i2c.3: bus frequency set to 65 KHz [ 0.116815] s3c-i2c s3c2440-i2c.3: i2c-3: S3C I2C adapter [ 0.116883] s3c-i2c s3c2440-i2c.4: slave address 0x00 [ 0.116898] s3c-i2c s3c2440-i2c.4: bus frequency set to 65 KHz [ 0.116951] s3c-i2c s3c2440-i2c.4: i2c-4: S3C I2C adapter [ 0.117012] s3c-i2c s3c2440-i2c.5: slave address 0x00 [ 0.117026] s3c-i2c s3c2440-i2c.5: bus frequency set to 65 KHz [ 0.117079] s3c-i2c s3c2440-i2c.5: i2c-5: S3C I2C adapter [ 0.117143] s3c-i2c s3c2440-i2c.7: slave address 0x00 [ 0.117157] s3c-i2c s3c2440-i2c.7: bus frequency set to 65 KHz [ 0.117592] s3c-i2c s3c2440-i2c.7: i2c-7: S3C I2C adapter [ 0.117649] s3c-i2c s3c2440-hdmiphy-i2c: slave address 0x00 [ 0.117664] s3c-i2c s3c2440-hdmiphy-i2c: bus frequency set to 378 KHz [ 0.117847] s3c-i2c s3c2440-hdmiphy-i2c: i2c-8: S3C I2C adapter [ 0.117948] media: Linux media interface: v0.10 [ 0.117976] Linux video capture interface: v2.00 [ 0.118209] of_get_named_gpio_flags exited with status 75 [ 0.118277] chromeos_arm chromeos_arm: chromeos system detected [ 0.119588] Advanced Linux Sound Architecture Driver Initialized. [ 0.119783] NetLabel: Initializing [ 0.119794] NetLabel: domain hash size = 128 [ 0.119802] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.119831] NetLabel: unlabeled traffic allowed by default [ 0.119912] EXYNOS5250: Adaptive Support Voltage init [ 0.119931] EXYNOS5250: ORIG: 2 MOD: 0 RESULT: 2 [ 0.119940] EXYNOS5250 MIF: RESULT: 0 [ 0.120027] Switching to clocksource mct-frc [ 0.129850] AppArmor: AppArmor Filesystem Enabled [ 0.133192] Unable to handle kernel paging request at virtual address 35797474 [ 0.133208] pgd = 80004000 [ 0.133216] [35797474] *pgd=00000000 [ 0.133229] Internal error: Oops: 5 [#1] ARM [ 0.133238] Modules linked in: [ 0.133250] CPU: 0 Tainted: G W (3.8.0 #2) [ 0.133266] PC is at kmem_cache_alloc_trace+0x70/0x150 [ 0.133277] LR is at kmem_cache_alloc_trace+0x40/0x150 [ 0.133287] pc : [<800dd1c8>] lr : [<800dd198>] psr: 20000113 [ 0.133287] sp : ef0bde08 ip : 00000d83 fp : ef0bde34 [ 0.133301] r10: 807a9fbc r9 : 00000000 r8 : 00000080 [ 0.133309] r7 : 8028b3f8 r6 : 000000d0 r5 : ef001200 r4 : 35797474 [ 0.133318] r3 : 00000000 r2 : ef0bddf8 r1 : 000000d0 r0 : 00000000 [ 0.133328] Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel [ 0.133340] Control: 10c5387d Table: 40004059 DAC: 00000015 [ 0.133349] Process swapper (pid: 1, stack limit = 0xef0bc238) [ 0.133358] Stack: (0xef0bde08 to 0xef0be000) [ 0.133368] de00: 80508664 80247488 000023bd ef236780 0000005f ef2956b8 [ 0.133381] de20: 807a9fb8 00000000 ef0bde54 ef0bde38 8028b3f8 800dd164 ef004400 ef236780 [ 0.133393] de40: 0000005f 00000002 ef0bde8c ef0bde58 8028c168 8028b354 0000005f 00000003 [ 0.133406] de60: 8002e120 00000000 00000014 80852a54 80736674 807cfc80 00000000 ef0bc018 [ 0.133418] de80: ef0bdeac ef0bde90 80735e68 8028c09c 807a95d0 00000000 80852930 80534cec [ 0.133431] dea0: ef0bdecc ef0bdeb0 80736338 80735e30 80638ace ef0bdec0 80852488 00000000 [ 0.133443] dec0: ef0bdeec ef0bded0 8073593c 807361e0 80639f66 ef0bdef4 0000000e 80853640 [ 0.133455] dee0: ef0bdf14 ef0bdef0 8073672c 80735840 80638fde ef0bdf00 80732a6c 00000005 [ 0.133468] df00: 80744358 8075ed10 ef0bdf54 ef0bdf18 80008730 80736680 00000005 00000005 [ 0.133480] df20: 000000a6 806a2514 8004b74c 00000005 80744358 8075ed10 807cfc80 807cfc80 [ 0.133492] df40: 000000a6 00000000 ef0bdf94 ef0bdf58 8071d9e8 8000869c 00000005 00000005 [ 0.133504] df60: 8071d264 ef0bdf70 800528d8 80508678 807cfc80 8050153c 00000000 00000000 [ 0.133517] df80: 00000000 00000000 ef0bdfac ef0bdf98 80501558 8071d8f8 00000000 00000000 [ 0.133529] dfa0: 00000000 ef0bdfb0 8000e058 80501548 00000000 00000000 00000000 00000000 [ 0.133540] dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 0.133552] dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000 [ 0.133576] [<800dd1c8>] (kmem_cache_alloc_trace+0x70/0x150) from [<8028b3f8>] (con_insert_unipair+0xb0/0xfc) [ 0.133594] [<8028b3f8>] (con_insert_unipair+0xb0/0xfc) from [<8028c168>] (con_set_default_unimap+0xd8/0x168) [ 0.133613] [<8028c168>] (con_set_default_unimap+0xd8/0x168) from [<80735e68>] (console_map_init+0x44/0x58) [ 0.133630] [<80735e68>] (console_map_init+0x44/0x58) from [<80736338>] (vty_init+0x164/0x1a8) [ 0.133645] [<80736338>] (vty_init+0x164/0x1a8) from [<8073593c>] (tty_init+0x108/0x144) [ 0.133660] [<8073593c>] (tty_init+0x108/0x144) from [<8073672c>] (chr_dev_init+0xb8/0xdc) [ 0.133676] [<8073672c>] (chr_dev_init+0xb8/0xdc) from [<80008730>] (do_one_initcall+0xa0/0x164) [ 0.133698] [<80008730>] (do_one_initcall+0xa0/0x164) from [<8071d9e8>] (kernel_init_freeable+0xfc/0x1b8) [ 0.133716] [<8071d9e8>] (kernel_init_freeable+0xfc/0x1b8) from [<80501558>] (kernel_init+0x1c/0xf4) [ 0.133733] [<80501558>] (kernel_init+0x1c/0xf4) from [<8000e058>] (ret_from_fork+0x14/0x20) [ 0.133747] Code: eb10989f e1a04000 ea000016 e5953014 (e7942003) [ 0.133758] ---[ end trace da227214a82491b8 ]--- [ 0.134274] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 0.134274]