[ 0.000000] microcode: microcode updated early to revision 0x2f, date = 2019-11-12 [ 0.000000] Linux version 5.13.0-27-generic (buildd@lgw01-amd64-045) (gcc (Ubuntu 9.3.0-17ubuntu1~20.04) 9.3.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #29~20.04.1-Ubuntu SMP Fri Jan 14 00:32:30 UTC 2022 (Ubuntu 5.13.0-27.29~20.04.1-generic 5.13.19) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.13.0-27-generic root=UUID=f903f1af-786e-4560-a741-11c16cc862dd ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Hygon HygonGenuine [ 0.000000] Centaur CentaurHauls [ 0.000000] zhaoxin Shanghai [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009dc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000a8b7efff] usable [ 0.000000] BIOS-e820: [mem 0x00000000a8b7f000-0x00000000a9e7efff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000a9e7f000-0x00000000a9f7efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000a9f7f000-0x00000000a9ffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000a9fff000-0x00000000a9ffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000aa000000-0x00000000ae7fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff600000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000024f7fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Hewlett-Packard HP EliteBook Folio 1040 G2/2270, BIOS M76 Ver. 80.02 02/18/2016 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2294.724 MHz processor [ 0.000805] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000809] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000816] last_pfn = 0x24f800 max_arch_pfn = 0x400000000 [ 0.000931] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001637] last_pfn = 0xaa000 max_arch_pfn = 0x400000000 [ 0.011146] Using GB pages for direct mapping [ 0.011431] RAMDISK: [mem 0x3065d000-0x34325fff] [ 0.011438] ACPI: Early table checksum verification disabled [ 0.011441] ACPI: RSDP 0x00000000000FC2A0 000024 (v02 HPQOEM) [ 0.011446] ACPI: XSDT 0x00000000A9FFD0E8 0000A4 (v01 HPQOEM SLIC-MPC 00000050 01000013) [ 0.011453] ACPI: FACP 0x00000000A9FFB000 00010C (v05 HPQOEM 2270 00000050 HP 00000001) [ 0.011459] ACPI: DSDT 0x00000000A9FD0000 025C10 (v02 HPQOEM 2270 00000001 INTL 20130927) [ 0.011464] ACPI: FACS 0x00000000A9F66000 000040 [ 0.011467] ACPI: HPET 0x00000000A9FFA000 000038 (v01 HPQOEM 2270 00000001 HP 00000001) [ 0.011471] ACPI: APIC 0x00000000A9FF9000 0000BC (v01 HPQOEM 2270 00000001 HP 00000001) [ 0.011475] ACPI: MCFG 0x00000000A9FF8000 00003C (v01 HPQOEM 2270 00000001 HP 00000001) [ 0.011478] ACPI: TCPA 0x00000000A9FF6000 000032 (v02 HPQOEM 2270 00000000 HP 00000001) [ 0.011482] ACPI: SSDT 0x00000000A9FCD000 0002D9 (v01 HPQOEM SataAhci 00001000 INTL 20130927) [ 0.011486] ACPI: SSDT 0x00000000A9FCC000 00048A (v01 HPQOEM PtidDevc 00001000 INTL 20130927) [ 0.011490] ACPI: SLIC 0x00000000A9FCB000 000176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001) [ 0.011493] ACPI: MSDM 0x00000000A9FCA000 000055 (v03 HPQOEM SLIC-MPC 00000000 HP 00000001) [ 0.011497] ACPI: FPDT 0x00000000A9FC9000 000044 (v01 HPQOEM 2270 00000001 HP 00000001) [ 0.011501] ACPI: BGRT 0x00000000A9FC8000 000038 (v00 HPQOEM 2270 00000001 HP 00000001) [ 0.011505] ACPI: SSDT 0x00000000A9FC5000 000544 (v02 PmRef Cpu0Ist 00003000 INTL 20130927) [ 0.011509] ACPI: SSDT 0x00000000A9FC4000 000B8F (v02 CpuRef CpuSsdt 00003000 INTL 20130927) [ 0.011513] ACPI: SSDT 0x00000000A9FC3000 0001D5 (v02 PmRef LakeTiny 00003000 INTL 20130927) [ 0.011516] ACPI: SSDT 0x00000000A9FC2000 00092C (v02 SaSsdt SaSsdt 00003000 INTL 20130927) [ 0.011520] ACPI: ASF! 0x00000000A9FF7000 0000A5 (v32 HPQOEM 2270 00000001 HP 00000001) [ 0.011523] ACPI: Reserving FACP table memory at [mem 0xa9ffb000-0xa9ffb10b] [ 0.011525] ACPI: Reserving DSDT table memory at [mem 0xa9fd0000-0xa9ff5c0f] [ 0.011527] ACPI: Reserving FACS table memory at [mem 0xa9f66000-0xa9f6603f] [ 0.011528] ACPI: Reserving HPET table memory at [mem 0xa9ffa000-0xa9ffa037] [ 0.011529] ACPI: Reserving APIC table memory at [mem 0xa9ff9000-0xa9ff90bb] [ 0.011530] ACPI: Reserving MCFG table memory at [mem 0xa9ff8000-0xa9ff803b] [ 0.011531] ACPI: Reserving TCPA table memory at [mem 0xa9ff6000-0xa9ff6031] [ 0.011532] ACPI: Reserving SSDT table memory at [mem 0xa9fcd000-0xa9fcd2d8] [ 0.011534] ACPI: Reserving SSDT table memory at [mem 0xa9fcc000-0xa9fcc489] [ 0.011535] ACPI: Reserving SLIC table memory at [mem 0xa9fcb000-0xa9fcb175] [ 0.011536] ACPI: Reserving MSDM table memory at [mem 0xa9fca000-0xa9fca054] [ 0.011537] ACPI: Reserving FPDT table memory at [mem 0xa9fc9000-0xa9fc9043] [ 0.011538] ACPI: Reserving BGRT table memory at [mem 0xa9fc8000-0xa9fc8037] [ 0.011539] ACPI: Reserving SSDT table memory at [mem 0xa9fc5000-0xa9fc5543] [ 0.011540] ACPI: Reserving SSDT table memory at [mem 0xa9fc4000-0xa9fc4b8e] [ 0.011541] ACPI: Reserving SSDT table memory at [mem 0xa9fc3000-0xa9fc31d4] [ 0.011542] ACPI: Reserving SSDT table memory at [mem 0xa9fc2000-0xa9fc292b] [ 0.011543] ACPI: Reserving ASF! table memory at [mem 0xa9ff7000-0xa9ff70a4] [ 0.011553] ACPI: Local APIC address 0xfee00000 [ 0.011643] No NUMA configuration found [ 0.011644] Faking a node at [mem 0x0000000000000000-0x000000024f7fffff] [ 0.011657] NODE_DATA(0) allocated [mem 0x24f7d6000-0x24f7fffff] [ 0.011968] Zone ranges: [ 0.011969] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.011972] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.011974] Normal [mem 0x0000000100000000-0x000000024f7fffff] [ 0.011976] Device empty [ 0.011977] Movable zone start for each node [ 0.011981] Early memory node ranges [ 0.011982] node 0: [mem 0x0000000000001000-0x000000000009cfff] [ 0.011984] node 0: [mem 0x0000000000100000-0x00000000a8b7efff] [ 0.011986] node 0: [mem 0x00000000a9fff000-0x00000000a9ffffff] [ 0.011987] node 0: [mem 0x0000000100000000-0x000000024f7fffff] [ 0.011989] Initmem setup node 0 [mem 0x0000000000001000-0x000000024f7fffff] [ 0.011991] On node 0 totalpages: 2065180 [ 0.011993] DMA zone: 64 pages used for memmap [ 0.011994] DMA zone: 156 pages reserved [ 0.011995] DMA zone: 3996 pages, LIFO batch:0 [ 0.011997] DMA32 zone: 10734 pages used for memmap [ 0.011998] DMA32 zone: 686976 pages, LIFO batch:63 [ 0.011999] Normal zone: 21472 pages used for memmap [ 0.012000] Normal zone: 1374208 pages, LIFO batch:63 [ 0.012003] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.012029] On node 0, zone DMA: 99 pages in unavailable ranges [ 0.016930] On node 0, zone DMA32: 5248 pages in unavailable ranges [ 0.026922] On node 0, zone Normal: 24576 pages in unavailable ranges [ 0.026945] On node 0, zone Normal: 2048 pages in unavailable ranges [ 0.026953] Reserving Intel graphics memory at [mem 0xac800000-0xae7fffff] [ 0.027052] ACPI: PM-Timer IO Port: 0x1808 [ 0.027055] ACPI: Local APIC address 0xfee00000 [ 0.027063] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.027065] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.027066] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.027067] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.027068] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.027069] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.027070] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.027071] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.027081] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-39 [ 0.027084] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.027086] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.027089] ACPI: IRQ0 used by override. [ 0.027090] ACPI: IRQ9 used by override. [ 0.027093] Using ACPI (MADT) for SMP configuration information [ 0.027094] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.027099] TSC deadline timer available [ 0.027100] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.027119] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.027122] PM: hibernation: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.027124] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.027125] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.027126] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.027128] PM: hibernation: Registered nosave memory: [mem 0xa8b7f000-0xa9e7efff] [ 0.027129] PM: hibernation: Registered nosave memory: [mem 0xa9e7f000-0xa9f7efff] [ 0.027130] PM: hibernation: Registered nosave memory: [mem 0xa9f7f000-0xa9ffefff] [ 0.027132] PM: hibernation: Registered nosave memory: [mem 0xaa000000-0xae7fffff] [ 0.027134] PM: hibernation: Registered nosave memory: [mem 0xae800000-0xdfffffff] [ 0.027135] PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.027135] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xfebfffff] [ 0.027136] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.027137] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfed0ffff] [ 0.027138] PM: hibernation: Registered nosave memory: [mem 0xfed10000-0xfed13fff] [ 0.027139] PM: hibernation: Registered nosave memory: [mem 0xfed14000-0xfed17fff] [ 0.027140] PM: hibernation: Registered nosave memory: [mem 0xfed18000-0xfed19fff] [ 0.027141] PM: hibernation: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff] [ 0.027142] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.027143] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.027144] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.027145] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xff5fffff] [ 0.027146] PM: hibernation: Registered nosave memory: [mem 0xff600000-0xffffffff] [ 0.027147] [mem 0xae800000-0xdfffffff] available for PCI devices [ 0.027149] Booting paravirtualized kernel on bare hardware [ 0.027152] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.027159] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.027519] percpu: Embedded 57 pages/cpu s196608 r8192 d28672 u262144 [ 0.027526] pcpu-alloc: s196608 r8192 d28672 u262144 alloc=1*2097152 [ 0.027529] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.027560] Built 1 zonelists, mobility grouping on. Total pages: 2032754 [ 0.027562] Policy zone: Normal [ 0.027564] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.13.0-27-generic root=UUID=f903f1af-786e-4560-a741-11c16cc862dd ro quiet splash vt.handoff=7 [ 0.028332] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.028675] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.028762] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.055910] Memory: 7942800K/8260720K available (16393K kernel code, 3511K rwdata, 10488K rodata, 2864K init, 5764K bss, 317660K reserved, 0K cma-reserved) [ 0.055918] random: get_random_u64 called from __kmem_cache_create+0x2d/0x440 with crng_init=0 [ 0.056057] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.056072] Kernel/User page tables isolation: enabled [ 0.056093] ftrace: allocating 49224 entries in 193 pages [ 0.075353] ftrace: allocated 193 pages with 3 groups [ 0.075480] rcu: Hierarchical RCU implementation. [ 0.075481] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.075483] Rude variant of Tasks RCU enabled. [ 0.075484] Tracing variant of Tasks RCU enabled. [ 0.075485] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.075486] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.080016] NR_IRQS: 524544, nr_irqs: 760, preallocated irqs: 16 [ 0.080332] random: crng done (trusting CPU's manufacturer) [ 0.080358] vt handoff: transparent VT on vt#7 [ 0.080365] Console: colour dummy device 80x25 [ 0.080380] printk: console [tty0] enabled [ 0.080401] ACPI: Core revision 20210331 [ 0.080586] hpet: HPET dysfunctional in PC10. Force disabled. [ 0.080588] APIC: Switch to symmetric I/O mode setup [ 0.080714] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.081237] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2113bd20142, max_idle_ns: 440795254610 ns [ 0.081244] Calibrating delay loop (skipped), value calculated using timer frequency.. 4589.44 BogoMIPS (lpj=9178896) [ 0.081247] pid_max: default: 32768 minimum: 301 [ 0.081275] LSM: Security Framework initializing [ 0.081285] Yama: becoming mindful. [ 0.081311] AppArmor: AppArmor initialized [ 0.081348] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.081366] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.081644] CPU0: Thermal monitoring enabled (TM1) [ 0.081682] process: using mwait in idle threads [ 0.081684] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.081685] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.081689] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.081691] Spectre V2 : Mitigation: Full generic retpoline [ 0.081691] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.081692] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.081694] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.081695] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl [ 0.081696] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.081699] TAA: Mitigation: Clear CPU buffers [ 0.081701] SRBDS: Mitigation: Microcode [ 0.081702] MDS: Mitigation: Clear CPU buffers [ 0.085241] Freeing SMP alternatives memory: 40K [ 0.085241] smpboot: Estimated ratio of average max frequency by base frequency (times 1024): 1202 [ 0.085241] smpboot: CPU0: Intel(R) Core(TM) i5-5300U CPU @ 2.30GHz (family: 0x6, model: 0x3d, stepping: 0x4) [ 0.085241] Performance Events: PEBS fmt2+, Broadwell events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.085241] ... version: 3 [ 0.085241] ... bit width: 48 [ 0.085241] ... generic registers: 4 [ 0.085241] ... value mask: 0000ffffffffffff [ 0.085241] ... max period: 00007fffffffffff [ 0.085241] ... fixed-purpose events: 3 [ 0.085241] ... event mask: 000000070000000f [ 0.085241] rcu: Hierarchical SRCU implementation. [ 0.085241] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.085241] smp: Bringing up secondary CPUs ... [ 0.085241] x86: Booting SMP configuration: [ 0.085241] .... node #0, CPUs: #1 [ 0.085241] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.085241] TAA CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/tsx_async_abort.html for more details. [ 0.085241] #2 #3 [ 0.087412] smp: Brought up 1 node, 4 CPUs [ 0.087412] smpboot: Max logical packages: 2 [ 0.087412] smpboot: Total of 4 processors activated (18357.79 BogoMIPS) [ 0.089530] devtmpfs: initialized [ 0.089530] x86/mm: Memory block size: 128MB [ 0.089952] PM: Registering ACPI NVS region [mem 0xa9e7f000-0xa9f7efff] (1048576 bytes) [ 0.089952] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.089952] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.089952] pinctrl core: initialized pinctrl subsystem [ 0.089952] PM: RTC time: 12:56:19, date: 2022-02-09 [ 0.089952] NET: Registered protocol family 16 [ 0.089952] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.089952] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.090051] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.090059] audit: initializing netlink subsys (disabled) [ 0.090068] audit: type=2000 audit(1644411379.008:1): state=initialized audit_enabled=0 res=1 [ 0.090068] thermal_sys: Registered thermal governor 'fair_share' [ 0.090068] thermal_sys: Registered thermal governor 'bang_bang' [ 0.090068] thermal_sys: Registered thermal governor 'step_wise' [ 0.090068] thermal_sys: Registered thermal governor 'user_space' [ 0.090068] thermal_sys: Registered thermal governor 'power_allocator' [ 0.090068] EISA bus registered [ 0.090068] cpuidle: using governor ladder [ 0.090068] cpuidle: using governor menu [ 0.090068] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.090068] ACPI: bus type PCI registered [ 0.090068] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.090068] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.090068] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.090068] PCI: Using configuration type 1 for base access [ 0.090068] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.090654] Kprobes globally optimized [ 0.093268] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.093268] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.093325] ACPI: Added _OSI(Module Device) [ 0.093327] ACPI: Added _OSI(Processor Device) [ 0.093328] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.093329] ACPI: Added _OSI(Processor Aggregator Device) [ 0.093331] ACPI: Added _OSI(Linux-Dell-Video) [ 0.093332] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.093333] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.116048] ACPI: 7 ACPI AML tables successfully acquired and loaded [ 0.117389] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 2.522039] ACPI: Dynamic OEM Table Load: [ 2.522049] ACPI: SSDT 0xFFFF9B5B80AA1400 0003F3 (v02 PmRef Cpu0Cst 00003001 INTL 20130927) [ 2.523250] ACPI: Dynamic OEM Table Load: [ 2.523258] ACPI: SSDT 0xFFFF9B5B80DE5000 0005DB (v02 PmRef ApIst 00003000 INTL 20130927) [ 2.524514] ACPI: Dynamic OEM Table Load: [ 2.524519] ACPI: SSDT 0xFFFF9B5B80D56E00 000119 (v02 PmRef ApCst 00003000 INTL 20130927) [ 2.526420] ACPI: EC: EC started [ 2.526422] ACPI: EC: interrupt blocked [ 3.411081] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 3.411084] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions [ 3.411086] ACPI: Interpreter enabled [ 3.411121] ACPI: (supports S0 S3 S4 S5) [ 3.411122] ACPI: Using IOAPIC for interrupt routing [ 3.411146] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 3.411523] ACPI: Enabled 7 GPEs in block 00 to 7F [ 3.413882] ACPI: PM: Power Resource [APPR] (off) [ 3.416466] ACPI: PM: Power Resource [COMP] (on) [ 3.416814] ACPI: PM: Power Resource [LPP] (on) [ 3.417547] ACPI: PM: Power Resource [PXP2] (on) [ 3.537670] ACPI: PM: Power Resource [WRST] (on) [ 3.540905] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 3.540913] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 3.542506] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR] [ 3.544590] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 3.544592] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 3.545392] PCI host bridge to bus 0000:00 [ 3.545395] pci_bus 0000:00: root bus resource [bus 00-fe] [ 3.545398] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 3.545400] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 3.545401] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 3.545403] pci_bus 0000:00: root bus resource [mem 0xae800000-0xdfffffff window] [ 3.545405] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed3ffff window] [ 3.545407] pci_bus 0000:00: root bus resource [mem 0xfed45000-0xfedfffff window] [ 3.545409] pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff window] [ 3.545421] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000 [ 3.545587] pci 0000:00:02.0: [8086:1616] type 00 class 0x030000 [ 3.545597] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc0ffffff 64bit] [ 3.545604] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref] [ 3.545609] pci 0000:00:02.0: reg 0x20: [io 0x5000-0x503f] [ 3.545629] pci 0000:00:02.0: DMAR: Disabling IOMMU for graphics on this chipset [ 3.545879] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300 [ 3.545889] pci 0000:00:03.0: reg 0x10: [mem 0xc1330000-0xc1333fff 64bit] [ 3.546086] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330 [ 3.546100] pci 0000:00:14.0: reg 0x10: [mem 0xc1320000-0xc132ffff 64bit] [ 3.546154] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 3.546314] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000 [ 3.546332] pci 0000:00:16.0: reg 0x10: [mem 0xc133b000-0xc133b01f 64bit] [ 3.546404] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 3.546543] pci 0000:00:19.0: [8086:15a2] type 00 class 0x020000 [ 3.546556] pci 0000:00:19.0: reg 0x10: [mem 0xc1300000-0xc131ffff] [ 3.546563] pci 0000:00:19.0: reg 0x14: [mem 0xc133d000-0xc133dfff] [ 3.546570] pci 0000:00:19.0: reg 0x18: [io 0x5080-0x509f] [ 3.546629] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 3.546779] pci 0000:00:1b.0: [8086:9ca0] type 00 class 0x040300 [ 3.546794] pci 0000:00:1b.0: reg 0x10: [mem 0xc1334000-0xc1337fff 64bit] [ 3.546855] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 3.547003] pci 0000:00:1c.0: [8086:9c90] type 01 class 0x060400 [ 3.547082] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 3.547587] pci 0000:00:1c.1: [8086:9c92] type 01 class 0x060400 [ 3.547754] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 3.548181] pci 0000:00:1c.3: [8086:9c96] type 01 class 0x060400 [ 3.548263] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 3.548782] pci 0000:00:1d.0: [8086:9ca6] type 00 class 0x0c0320 [ 3.548797] pci 0000:00:1d.0: reg 0x10: [mem 0xc1339000-0xc13393ff] [ 3.548873] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 3.549037] pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100 [ 3.549310] pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601 [ 3.549321] pci 0000:00:1f.2: reg 0x10: [io 0x50a8-0x50af] [ 3.549328] pci 0000:00:1f.2: reg 0x14: [io 0x50bc-0x50bf] [ 3.549335] pci 0000:00:1f.2: reg 0x18: [io 0x50a0-0x50a7] [ 3.549342] pci 0000:00:1f.2: reg 0x1c: [io 0x50b8-0x50bb] [ 3.549348] pci 0000:00:1f.2: reg 0x20: [io 0x5060-0x507f] [ 3.549355] pci 0000:00:1f.2: reg 0x24: [mem 0xc1338000-0xc13387ff] [ 3.549394] pci 0000:00:1f.2: PME# supported from D3hot [ 3.549539] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500 [ 3.549554] pci 0000:00:1f.3: reg 0x10: [mem 0xc133a000-0xc133a0ff 64bit] [ 3.549572] pci 0000:00:1f.3: reg 0x20: [io 0xef80-0xef9f] [ 3.549764] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 3.549770] pci 0000:00:1c.0: bridge window [mem 0xc1200000-0xc12fffff] [ 3.549828] pci 0000:02:00.0: [10ec:5227] type 00 class 0xff0000 [ 3.549849] pci 0000:02:00.0: reg 0x10: [mem 0xc1100000-0xc1100fff] [ 3.550000] pci 0000:02:00.0: supports D1 D2 [ 3.550001] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold [ 3.550122] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 3.550125] pci 0000:00:1c.1: bridge window [io 0x3000-0x4fff] [ 3.550128] pci 0000:00:1c.1: bridge window [mem 0xc1100000-0xc11fffff] [ 3.550449] pci 0000:03:00.0: [8086:095a] type 00 class 0x028000 [ 3.550540] pci 0000:03:00.0: reg 0x10: [mem 0xc1000000-0xc1001fff 64bit] [ 3.551003] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 3.551500] pci 0000:00:1c.3: PCI bridge to [bus 03] [ 3.551505] pci 0000:00:1c.3: bridge window [mem 0xc1000000-0xc10fffff] [ 3.552834] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 3.552900] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 3.552963] ACPI: PCI: Interrupt link LNKC configured for IRQ 10 [ 3.553025] ACPI: PCI: Interrupt link LNKD configured for IRQ 10 [ 3.553087] ACPI: PCI: Interrupt link LNKE configured for IRQ 5 [ 3.553152] ACPI: PCI: Interrupt link LNKF configured for IRQ 11 [ 3.553214] ACPI: PCI: Interrupt link LNKG configured for IRQ 10 [ 3.553281] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 3.553283] ACPI: PCI: Interrupt link LNKH disabled [ 3.553775] acpi LNXPOWER:04: Turning OFF [ 3.553842] ACPI: EC: interrupt unblocked [ 3.553843] ACPI: EC: event unblocked [ 3.553848] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 3.553849] ACPI: EC: GPE=0x6 [ 3.553851] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC initialization complete [ 3.553853] ACPI: \_SB_.PCI0.LPCB.EC0_: EC: Used to handle transactions and events [ 3.553919] iommu: Default domain type: Translated [ 3.553919] SCSI subsystem initialized [ 3.553919] libata version 3.00 loaded. [ 3.553919] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 3.553919] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 3.553919] pci 0000:00:02.0: vgaarb: bridge control possible [ 3.553919] vgaarb: loaded [ 3.553919] ACPI: bus type USB registered [ 3.553919] usbcore: registered new interface driver usbfs [ 3.553919] usbcore: registered new interface driver hub [ 3.553919] usbcore: registered new device driver usb [ 3.553919] pps_core: LinuxPPS API ver. 1 registered [ 3.553919] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 3.553919] PTP clock support registered [ 3.553919] EDAC MC: Ver: 3.0.0 [ 3.553919] NetLabel: Initializing [ 3.553919] NetLabel: domain hash size = 128 [ 3.553919] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 3.553919] NetLabel: unlabeled traffic allowed by default [ 3.553919] PCI: Using ACPI for IRQ routing [ 3.560058] PCI: pci_cache_line_size set to 64 bytes [ 3.560379] e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff] [ 3.560382] e820: reserve RAM buffer [mem 0xa8b7f000-0xabffffff] [ 3.560383] e820: reserve RAM buffer [mem 0xaa000000-0xabffffff] [ 3.560385] e820: reserve RAM buffer [mem 0x24f800000-0x24fffffff] [ 3.561457] clocksource: Switched to clocksource tsc-early [ 3.571912] VFS: Disk quotas dquot_6.6.0 [ 3.571928] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 3.572040] AppArmor: AppArmor Filesystem Enabled [ 3.572089] pnp: PnP ACPI init [ 3.572375] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 3.572379] system 00:00: [mem 0xfed10000-0xfed17fff] could not be reserved [ 3.572381] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved [ 3.572383] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved [ 3.572385] system 00:00: [mem 0x00000000-0x00000fff] could not be reserved [ 3.572386] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved [ 3.572388] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved [ 3.572390] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved [ 3.572392] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved [ 3.572394] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved [ 3.572395] system 00:00: [mem 0xae810000-0xae81ffff] has been reserved [ 3.572397] system 00:00: [mem 0xae800000-0xae80ffff] has been reserved [ 3.572404] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 3.572598] system 00:01: [io 0x0200-0x020f] has been reserved [ 3.572600] system 00:01: [io 0x0220-0x027f] has been reserved [ 3.572602] system 00:01: [io 0xffff] has been reserved [ 3.572604] system 00:01: [io 0xffff] has been reserved [ 3.572606] system 00:01: [io 0xffff] has been reserved [ 3.572607] system 00:01: [io 0x1800-0x18fe] has been reserved [ 3.572609] system 00:01: [io 0xef80-0xef9f] has been reserved [ 3.572613] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 3.572668] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 3.572891] pnp 00:03: Plug and Play ACPI device, IDs HPQ8002 PNP0303 (active) [ 3.572914] pnp 00:04: Plug and Play ACPI device, IDs SYN3014 SYN0100 SYN0002 PNP0f13 (active) [ 3.573605] pnp 00:05: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active) [ 3.573667] pnp: PnP ACPI: found 6 devices [ 3.579498] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 3.579561] NET: Registered protocol family 2 [ 3.579681] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 3.581059] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 3.581120] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 3.581299] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 3.581385] TCP: Hash tables configured (established 65536 bind 65536) [ 3.581491] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear) [ 3.581543] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 3.581571] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 3.581632] NET: Registered protocol family 1 [ 3.581637] NET: Registered protocol family 44 [ 3.581646] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000 [ 3.581660] pci 0000:00:1c.1: BAR 15: assigned [mem 0xae900000-0xaeafffff 64bit pref] [ 3.581664] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 3.581669] pci 0000:00:1c.0: bridge window [mem 0xc1200000-0xc12fffff] [ 3.581676] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 3.581678] pci 0000:00:1c.1: bridge window [io 0x3000-0x4fff] [ 3.581682] pci 0000:00:1c.1: bridge window [mem 0xc1100000-0xc11fffff] [ 3.581685] pci 0000:00:1c.1: bridge window [mem 0xae900000-0xaeafffff 64bit pref] [ 3.581690] pci 0000:00:1c.3: PCI bridge to [bus 03] [ 3.581693] pci 0000:00:1c.3: bridge window [mem 0xc1000000-0xc10fffff] [ 3.581701] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 3.581703] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 3.581704] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 3.581706] pci_bus 0000:00: resource 7 [mem 0xae800000-0xdfffffff window] [ 3.581708] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfed3ffff window] [ 3.581709] pci_bus 0000:00: resource 9 [mem 0xfed45000-0xfedfffff window] [ 3.581711] pci_bus 0000:00: resource 10 [mem 0xfee01000-0xffffffff window] [ 3.581713] pci_bus 0000:01: resource 1 [mem 0xc1200000-0xc12fffff] [ 3.581714] pci_bus 0000:02: resource 0 [io 0x3000-0x4fff] [ 3.581716] pci_bus 0000:02: resource 1 [mem 0xc1100000-0xc11fffff] [ 3.581717] pci_bus 0000:02: resource 2 [mem 0xae900000-0xaeafffff 64bit pref] [ 3.581719] pci_bus 0000:03: resource 1 [mem 0xc1000000-0xc10fffff] [ 3.581828] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 3.581837] pci 0000:00:14.0: enabling device (0000 -> 0002) [ 3.582201] pci 0000:00:1d.0: enabling device (0000 -> 0002) [ 3.582640] PCI: CLS 64 bytes, default 64 [ 3.582648] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 3.582649] software IO TLB: mapped [mem 0x00000000a4b7f000-0x00000000a8b7f000] (64MB) [ 3.582709] Trying to unpack rootfs image as initramfs... [ 3.582712] resource sanity check: requesting [mem 0xfed10000-0xfed15fff], which spans more than Reserved [mem 0xfed10000-0xfed13fff] [ 3.582716] caller snb_uncore_imc_init_box+0x7a/0xc0 mapping multiple BARs [ 3.590462] Initialise system trusted keyrings [ 3.590477] Key type blacklist registered [ 3.590513] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 3.591757] zbud: loaded [ 3.592051] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 3.592210] fuse: init (API version 7.34) [ 3.592377] integrity: Platform Keyring initialized [ 3.604865] Key type asymmetric registered [ 3.604870] Asymmetric key parser 'x509' registered [ 3.604886] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243) [ 3.604924] io scheduler mq-deadline registered [ 3.605395] pcieport 0000:00:1c.0: PME: Signaling with IRQ 40 [ 3.605685] pcieport 0000:00:1c.1: PME: Signaling with IRQ 41 [ 3.605711] pcieport 0000:00:1c.1: pciehp: Slot #1 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+ [ 3.606266] pcieport 0000:00:1c.3: PME: Signaling with IRQ 42 [ 3.606386] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 3.606470] vesafb: mode is 1920x1080x32, linelength=7680, pages=0 [ 3.606474] vesafb: scrolling: redraw [ 3.606475] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 3.606498] vesafb: framebuffer at 0xb0000000, mapped to 0x0000000016aab48c, using 8128k, total 8128k [ 3.606567] fbcon: Deferring console take-over [ 3.606568] fb0: VESA VGA frame buffer device [ 3.755787] Freeing initrd memory: 62244K [ 4.049489] ACPI: AC: AC Adapter [AC] (off-line) [ 4.049566] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 [ 4.049586] ACPI: button: Sleep Button [SLPB] [ 4.049616] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 4.049631] ACPI: button: Lid Switch [LID] [ 4.049659] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 4.049694] ACPI: button: Power Button [PWRF] [ 4.074888] thermal LNXTHERM:00: registered as thermal_zone0 [ 4.074892] ACPI: thermal: Thermal Zone [CPUZ] (43 C) [ 4.099296] thermal LNXTHERM:01: registered as thermal_zone1 [ 4.099301] ACPI: thermal: Thermal Zone [GFXZ] (0 C) [ 4.114505] thermal LNXTHERM:02: registered as thermal_zone2 [ 4.114510] ACPI: thermal: Thermal Zone [EXTZ] (34 C) [ 4.129763] thermal LNXTHERM:03: registered as thermal_zone3 [ 4.129767] ACPI: thermal: Thermal Zone [LOCZ] (34 C) [ 4.145077] thermal LNXTHERM:04: registered as thermal_zone4 [ 4.145082] ACPI: thermal: Thermal Zone [BATZ] (29 C) [ 4.145572] thermal LNXTHERM:05: registered as thermal_zone5 [ 4.145575] ACPI: thermal: Thermal Zone [PCHZ] (84 C) [ 4.145772] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 4.147436] hpet_acpi_add: no address or irqs in _CRS [ 4.147476] Linux agpgart interface v0.103 [ 4.150319] tpm_tis 00:05: 1.2 TPM (device-id 0x1A, rev-id 16) [ 4.166884] ACPI: battery: Slot [BAT0] (battery present) [ 4.365338] loop: module loaded [ 4.365648] libphy: Fixed MDIO Bus: probed [ 4.365650] tun: Universal TUN/TAP device driver, 1.6 [ 4.365680] PPP generic driver version 2.4.2 [ 4.365744] VFIO - User Level meta-driver version: 0.3 [ 4.365903] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.365908] ehci-pci: EHCI PCI platform driver [ 4.366119] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 4.366126] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 4.366137] ehci-pci 0000:00:1d.0: debug port 2 [ 4.370041] ehci-pci 0000:00:1d.0: irq 17, io mem 0xc1339000 [ 4.385301] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 4.385363] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.13 [ 4.385366] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.385368] usb usb1: Product: EHCI Host Controller [ 4.385370] usb usb1: Manufacturer: Linux 5.13.0-27-generic ehci_hcd [ 4.385371] usb usb1: SerialNumber: 0000:00:1d.0 [ 4.385505] hub 1-0:1.0: USB hub found [ 4.385511] hub 1-0:1.0: 3 ports detected [ 4.385723] ehci-platform: EHCI generic platform driver [ 4.385738] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 4.385741] ohci-pci: OHCI PCI platform driver [ 4.385752] ohci-platform: OHCI generic platform driver [ 4.385758] uhci_hcd: USB Universal Host Controller Interface driver [ 4.385805] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 4.386879] i8042: Detected active multiplexing controller, rev 1.1 [ 4.387520] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 4.387528] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 4.387555] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 4.387575] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 4.387592] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 4.387688] mousedev: PS/2 mouse device common for all mice [ 4.387821] rtc_cmos 00:02: RTC can wake from S4 [ 4.388037] rtc_cmos 00:02: registered as rtc0 [ 4.388092] rtc_cmos 00:02: setting system clock to 2022-02-09T12:56:23 UTC (1644411383) [ 4.388108] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram [ 4.388116] i2c /dev entries driver [ 4.388226] device-mapper: uevent: version 1.0.3 [ 4.388285] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com [ 4.388303] platform eisa.0: Probing EISA bus 0 [ 4.388306] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 4.388307] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 4.388308] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 4.388310] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 4.388311] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 4.388312] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 4.388313] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 4.388315] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 4.388316] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 4.388317] platform eisa.0: EISA: Detected 0 cards [ 4.388324] intel_pstate: Intel P-state driver initializing [ 4.388574] ledtrig-cpu: registered to indicate activity on CPUs [ 4.388668] drop_monitor: Initializing network drop monitor service [ 4.388808] NET: Registered protocol family 10 [ 4.394704] Segment Routing with IPv6 [ 4.394728] NET: Registered protocol family 17 [ 4.394821] Key type dns_resolver registered [ 4.395078] microcode: sig=0x306d4, pf=0x40, revision=0x2f [ 4.395119] microcode: Microcode Update Driver: v2.2. [ 4.395123] IPI shorthand broadcast: enabled [ 4.395133] sched_clock: Marking stable (4394101248, 1014403)->(4407725314, -12609663) [ 4.395294] registered taskstats version 1 [ 4.395304] Loading compiled-in X.509 certificates [ 4.396091] Loaded X.509 cert 'Build time autogenerated kernel key: a44c44071aa94830ca15ad3e535ec1ff53fed0ee' [ 4.396685] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969' [ 4.397294] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19' [ 4.397295] blacklist: Loading compiled-in revocation X.509 certificates [ 4.397312] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing: 61482aa2830d0ab2ad5af10b7250da9033ddcef0' [ 4.397546] zswap: loaded using pool lzo/zbud [ 4.397684] Key type ._fscrypt registered [ 4.397685] Key type .fscrypt registered [ 4.397686] Key type fscrypt-provisioning registered [ 4.397782] Key type trusted registered [ 4.400322] Key type encrypted registered [ 4.400326] AppArmor: AppArmor sha1 policy hashing enabled [ 4.400337] Loading compiled-in module X.509 certificates [ 4.400916] Loaded X.509 cert 'Build time autogenerated kernel key: a44c44071aa94830ca15ad3e535ec1ff53fed0ee' [ 4.400918] ima: Allocated hash algorithm: sha1 [ 4.412573] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 4.440556] ima: No architecture policies found [ 4.440573] evm: Initialising EVM extended attributes: [ 4.440574] evm: security.selinux [ 4.440575] evm: security.SMACK64 [ 4.440576] evm: security.SMACK64EXEC [ 4.440577] evm: security.SMACK64TRANSMUTE [ 4.440577] evm: security.SMACK64MMAP [ 4.440578] evm: security.apparmor [ 4.440579] evm: security.ima [ 4.440579] evm: security.capability [ 4.440580] evm: HMAC attrs: 0x1 [ 4.440970] PM: Magic number: 10:812:935 [ 4.441201] RAS: Correctable Errors collector initialized. [ 4.442977] Freeing unused decrypted memory: 2036K [ 4.443366] Freeing unused kernel image (initmem) memory: 2864K [ 4.465343] Write protecting the kernel read-only data: 30720k [ 4.465823] Freeing unused kernel image (text/rodata gap) memory: 2036K [ 4.466169] Freeing unused kernel image (rodata/data gap) memory: 1800K [ 4.516706] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 4.516708] x86/mm: Checking user space page tables [ 4.563451] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 4.563455] Run /init as init process [ 4.563456] with arguments: [ 4.563457] /init [ 4.563458] splash [ 4.563459] with environment: [ 4.563460] HOME=/ [ 4.563460] TERM=linux [ 4.563461] BOOT_IMAGE=/boot/vmlinuz-5.13.0-27-generic [ 4.593260] tsc: Refined TSC clocksource calibration: 2294.687 MHz [ 4.593270] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x21139a22526, max_idle_ns: 440795252169 ns [ 4.593287] clocksource: Switched to clocksource tsc [ 4.669007] e1000e: Intel(R) PRO/1000 Network Driver [ 4.669011] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 4.671727] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 4.671739] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 4.672197] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 4.672792] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x000000000004b810 [ 4.672994] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 4.672999] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 4.673003] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 4.673047] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.13 [ 4.673051] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.673053] usb usb2: Product: xHCI Host Controller [ 4.673056] usb usb2: Manufacturer: Linux 5.13.0-27-generic xhci-hcd [ 4.673057] usb usb2: SerialNumber: 0000:00:14.0 [ 4.673211] hub 2-0:1.0: USB hub found [ 4.673228] hub 2-0:1.0: 11 ports detected [ 4.675021] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.13 [ 4.675026] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.675028] usb usb3: Product: xHCI Host Controller [ 4.675030] usb usb3: Manufacturer: Linux 5.13.0-27-generic xhci-hcd [ 4.675032] usb usb3: SerialNumber: 0000:00:14.0 [ 4.675146] hub 3-0:1.0: USB hub found [ 4.675155] hub 3-0:1.0: 4 ports detected [ 4.675908] usb: port power management may be unreliable [ 4.679699] ahci 0000:00:1f.2: version 3.0 [ 4.682207] i801_smbus 0000:00:1f.3: SPD Write Disable is set [ 4.682226] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 4.684414] i2c i2c-0: 2/2 memory slots populated (from DMI) [ 4.685227] i2c i2c-0: Successfully instantiated SPD at 0x50 [ 4.691593] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x8 impl SATA mode [ 4.691600] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst [ 4.692781] scsi host0: ahci [ 4.693005] scsi host1: ahci [ 4.693276] scsi host2: ahci [ 4.693627] scsi host3: ahci [ 4.693684] ata1: DUMMY [ 4.693686] ata2: DUMMY [ 4.693688] ata3: DUMMY [ 4.693690] ata4: SATA max UDMA/133 abar m2048@0xc1338000 port 0xc1338280 irq 45 [ 4.721256] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 4.858383] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock [ 4.877653] usb 1-1: New USB device found, idVendor=8087, idProduct=8001, bcdDevice= 0.03 [ 4.877658] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.877889] hub 1-1:1.0: USB hub found [ 4.877971] hub 1-1:1.0: 8 ports detected [ 4.925300] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) ec:8e:b5:2d:22:f2 [ 4.925308] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 4.925345] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF [ 4.927068] e1000e 0000:00:19.0 enp0s25: renamed from eth0 [ 5.008393] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 5.009029] ata4.00: supports DRM functions and may not be fully accessible [ 5.009132] ata4.00: ATA-9: SanDisk SD7TN3Q-256G-1006, X2180306, max UDMA/133 [ 5.009148] ata4.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 5.009267] usb 2-2: new full-speed USB device number 2 using xhci_hcd [ 5.013105] ata4.00: supports DRM functions and may not be fully accessible [ 5.016609] ata4.00: configured for UDMA/133 [ 5.027274] scsi 3:0:0:0: Direct-Access ATA SanDisk SD7TN3Q- 0306 PQ: 0 ANSI: 5 [ 5.027684] sd 3:0:0:0: Attached scsi generic sg0 type 0 [ 5.027790] sd 3:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB) [ 5.027799] sd 3:0:0:0: [sda] 4096-byte physical blocks [ 5.027828] sd 3:0:0:0: [sda] Write Protect is off [ 5.027834] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.027865] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.042361] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > [ 5.073913] sd 3:0:0:0: [sda] supports TCG Opal [ 5.073917] sd 3:0:0:0: [sda] Attached SCSI disk [ 5.159161] usb 2-2: New USB device found, idVendor=1ea7, idProduct=0064, bcdDevice= 2.00 [ 5.159166] usb 2-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 5.159168] usb 2-2: Product: 2.4G Mouse [ 5.185660] fbcon: Taking over console [ 5.185735] Console: switching to colour frame buffer device 240x67 [ 5.285259] usb 2-4: new full-speed USB device number 3 using xhci_hcd [ 5.414322] psmouse serio3: synaptics: queried max coordinates: x [..5676], y [..4690] [ 5.434691] usb 2-4: New USB device found, idVendor=8087, idProduct=0a2a, bcdDevice= 0.01 [ 5.434696] usb 2-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.444878] psmouse serio3: synaptics: queried min coordinates: x [1266..], y [1162..] [ 5.499884] psmouse serio3: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2a1, caps: 0xd40923/0x840300/0x12e800/0x0, board id: 2685, fw id: 1608298 [ 5.535046] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio3/input/input10 [ 5.561268] usb 2-5: new full-speed USB device number 4 using xhci_hcd [ 5.710556] usb 2-5: New USB device found, idVendor=138a, idProduct=003f, bcdDevice= 1.04 [ 5.710563] usb 2-5: New USB device strings: Mfr=0, Product=0, SerialNumber=1 [ 5.710567] usb 2-5: SerialNumber: 00a0d218689b [ 5.834574] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [ 5.837267] usb 2-6: new high-speed USB device number 5 using xhci_hcd [ 6.012480] usb 2-6: New USB device found, idVendor=03f0, idProduct=581d, bcdDevice= 2.28 [ 6.012494] usb 2-6: New USB device strings: Mfr=2, Product=3, SerialNumber=4 [ 6.012500] usb 2-6: Product: HP lt4112 Gobi 4G Module [ 6.012504] usb 2-6: Manufacturer: Hewlett-Packard [ 6.012508] usb 2-6: SerialNumber: 0123456712ABCA17 [ 6.229348] usb 2-7: new high-speed USB device number 6 using xhci_hcd [ 6.377562] usb 2-7: New USB device found, idVendor=0424, idProduct=2532, bcdDevice= 1.82 [ 6.377576] usb 2-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 6.378390] hub 2-7:1.0: USB hub found [ 6.378429] hub 2-7:1.0: 2 ports detected [ 6.505348] usb 2-8: new full-speed USB device number 7 using xhci_hcd [ 6.663241] usb 2-8: New USB device found, idVendor=058f, idProduct=9540, bcdDevice= 1.20 [ 6.663255] usb 2-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.663261] usb 2-8: Product: EMV Smartcard Reader [ 6.663266] usb 2-8: Manufacturer: Generic [ 6.683167] hid: raw HID events driver (C) Jiri Kosina [ 6.689784] usbcore: registered new interface driver usbhid [ 6.689790] usbhid: USB HID core driver [ 6.695925] input: 2.4G Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:1EA7:0064.0001/input/input12 [ 6.696099] input: 2.4G Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:1EA7:0064.0001/input/input13 [ 6.696370] hid-generic 0003:1EA7:0064.0001: input,hiddev0,hidraw0: USB HID v1.10 Mouse [2.4G Mouse] on usb-0000:00:14.0-2/input0 [ 6.733333] usb 2-7.1: new full-speed USB device number 8 using xhci_hcd [ 6.841802] usb 2-7.1: New USB device found, idVendor=03eb, idProduct=8a30, bcdDevice=12.33 [ 6.841808] usb 2-7.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.841811] usb 2-7.1: Product: Atmel maXTouch Digitizer [ 6.841813] usb 2-7.1: Manufacturer: Atmel [ 6.855344] input: Atmel Atmel maXTouch Digitizer as /devices/pci0000:00/0000:00:14.0/usb2/2-7/2-7.1/2-7.1:1.0/0003:03EB:8A30.0002/input/input14 [ 6.855514] hid-generic 0003:03EB:8A30.0002: input,hidraw1: USB HID v1.11 Device [Atmel Atmel maXTouch Digitizer] on usb-0000:00:14.0-7.1/input0 [ 6.859333] hid-generic 0003:03EB:8A30.0003: hiddev1,hidraw2: USB HID v1.11 Device [Atmel Atmel maXTouch Digitizer] on usb-0000:00:14.0-7.1/input1 [ 6.937329] usb 2-7.2: new high-speed USB device number 9 using xhci_hcd [ 7.120793] usb 2-7.2: New USB device found, idVendor=05c8, idProduct=0374, bcdDevice= 1.01 [ 7.120805] usb 2-7.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.120810] usb 2-7.2: Product: HP HD Webcam [ 7.120813] usb 2-7.2: Manufacturer: SunplusIT INC. [ 7.398044] systemd[1]: Inserted module 'autofs4' [ 7.422857] systemd[1]: systemd 245.4-4ubuntu3.15 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.441381] systemd[1]: Detected architecture x86-64. [ 7.465993] systemd[1]: Set hostname to . [ 7.671662] systemd[1]: Created slice Virtual Machine and Container Slice. [ 7.672032] systemd[1]: Created slice system-modprobe.slice. [ 7.672246] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 7.672453] systemd[1]: Created slice User and Session Slice. [ 7.672512] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 7.672677] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 7.672721] systemd[1]: Reached target User and Group Name Lookups. [ 7.672732] systemd[1]: Reached target Remote File Systems. [ 7.672742] systemd[1]: Reached target Slices. [ 7.672761] systemd[1]: Reached target Libvirt guests shutdown. [ 7.672825] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 7.672924] systemd[1]: Listening on LVM2 poll daemon socket. [ 7.673001] systemd[1]: Listening on Syslog Socket. [ 7.673071] systemd[1]: Listening on fsck to fsckd communication Socket. [ 7.673112] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 7.673327] systemd[1]: Listening on Journal Audit Socket. [ 7.673404] systemd[1]: Listening on Journal Socket (/dev/log). [ 7.673492] systemd[1]: Listening on Journal Socket. [ 7.673576] systemd[1]: Listening on udev Control Socket. [ 7.673632] systemd[1]: Listening on udev Kernel Socket. [ 7.674414] systemd[1]: Mounting Huge Pages File System... [ 7.675265] systemd[1]: Mounting POSIX Message Queue File System... [ 7.676275] systemd[1]: Mounting Kernel Debug File System... [ 7.677747] systemd[1]: Mounting Kernel Trace File System... [ 7.679546] systemd[1]: Starting Journal Service... [ 7.681019] systemd[1]: Starting Availability of block devices... [ 7.682453] systemd[1]: Starting Set the console keyboard layout... [ 7.683826] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 7.685138] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... [ 7.686486] systemd[1]: Starting Load Kernel Module drm... [ 7.687093] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 7.687151] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 7.689356] systemd[1]: Starting Load Kernel Modules... [ 7.691069] systemd[1]: Starting Remount Root and Kernel File Systems... [ 7.692672] systemd[1]: Starting udev Coldplug all Devices... [ 7.694014] systemd[1]: Starting Uncomplicated firewall... [ 7.699625] systemd[1]: Mounted Huge Pages File System. [ 7.699802] systemd[1]: Mounted POSIX Message Queue File System. [ 7.699958] systemd[1]: Mounted Kernel Debug File System. [ 7.700103] systemd[1]: Mounted Kernel Trace File System. [ 7.700742] systemd[1]: Finished Availability of block devices. [ 7.701475] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 7.705148] systemd[1]: Finished Uncomplicated firewall. [ 7.705413] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro. Quota mode: none. [ 7.711535] systemd[1]: modprobe@drm.service: Succeeded. [ 7.712046] systemd[1]: Finished Load Kernel Module drm. [ 7.712787] systemd[1]: Finished Remount Root and Kernel File Systems. [ 7.714327] systemd[1]: Activating swap /swapfile... [ 7.717342] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 7.717428] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 7.718824] systemd[1]: Starting Load/Save Random Seed... [ 7.720374] systemd[1]: Starting Create System Users... [ 7.731061] lp: driver loaded but no devices found [ 7.737205] ppdev: user-space parallel port driver [ 7.738480] systemd[1]: Finished Load/Save Random Seed. [ 7.745591] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k SSFS [ 7.745702] systemd[1]: Activated swap /swapfile. [ 7.745828] systemd[1]: Reached target Swap. [ 7.750422] systemd[1]: Finished Create System Users. [ 7.751738] systemd[1]: Starting Create Static Device Nodes in /dev... [ 7.753350] systemd[1]: Finished Load Kernel Modules. [ 7.754950] systemd[1]: Mounting FUSE Control File System... [ 7.756405] systemd[1]: Mounting Kernel Configuration File System... [ 7.757816] systemd[1]: Starting Apply Kernel Variables... [ 7.766923] systemd[1]: Finished Create Static Device Nodes in /dev. [ 7.767168] systemd[1]: Mounted Kernel Configuration File System. [ 7.768822] systemd[1]: Starting udev Kernel Device Manager... [ 7.773002] systemd[1]: Mounted FUSE Control File System. [ 7.783189] systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling. [ 7.790703] systemd[1]: Finished Apply Kernel Variables. [ 7.805422] systemd[1]: Started Journal Service. [ 7.812854] systemd-journald[268]: Received client request to flush runtime journal. [ 7.833403] loop0: detected capacity change from 0 to 113536 [ 7.861484] loop1: detected capacity change from 0 to 8 [ 7.861725] loop2: detected capacity change from 0 to 126792 [ 7.861903] loop3: detected capacity change from 0 to 88952 [ 7.881454] loop4: detected capacity change from 0 to 448512 [ 7.881757] loop5: detected capacity change from 0 to 448512 [ 7.881866] loop6: detected capacity change from 0 to 88616 [ 7.902270] loop7: detected capacity change from 0 to 133552 [ 7.946000] loop8: detected capacity change from 0 to 126784 [ 8.016437] loop9: detected capacity change from 0 to 113680 [ 8.081337] loop10: detected capacity change from 0 to 104360 [ 8.158922] input: HP Wireless hotkeys as /devices/virtual/input/input15 [ 8.165302] loop11: detected capacity change from 0 to 133320 [ 8.237411] loop12: detected capacity change from 0 to 111080 [ 8.264640] at24 0-0050: supply vcc not found, using dummy regulator [ 8.267098] at24 0-0050: 256 byte spd EEPROM, read-only [ 8.271493] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 8.291791] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 8.318503] Bluetooth: Core ver 2.22 [ 8.318530] NET: Registered protocol family 31 [ 8.318532] Bluetooth: HCI device and connection manager initialized [ 8.318536] Bluetooth: HCI socket layer initialized [ 8.318539] Bluetooth: L2CAP socket layer initialized [ 8.318543] Bluetooth: SCO socket layer initialized [ 8.359885] mc: Linux media interface: v0.10 [ 8.366142] input: Atmel Atmel maXTouch Digitizer as /devices/pci0000:00/0000:00:14.0/usb2/2-7/2-7.1/2-7.1:1.0/0003:03EB:8A30.0002/input/input17 [ 8.366286] hid-multitouch 0003:03EB:8A30.0002: input,hidraw1: USB HID v1.11 Device [Atmel Atmel maXTouch Digitizer] on usb-0000:00:14.0-7.1/input0 [ 8.372277] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer [ 8.372282] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 8.372284] RAPL PMU: hw unit of domain package 2^-14 Joules [ 8.372285] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 8.372286] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 8.374512] Intel(R) Wireless WiFi driver for Linux [ 8.387998] videodev: Linux video capture interface: v2.00 [ 8.389397] cryptd: max_cpu_qlen set to 1000 [ 8.422208] AVX2 version of gcm_enc/dec engaged. [ 8.422247] AES CTR mode by8 optimization enabled [ 8.461634] usb 2-7.2: Found UVC 1.00 device HP HD Webcam (05c8:0374) [ 8.476653] input: HP WMI hotkeys as /devices/virtual/input/input16 [ 8.484732] iwlwifi 0000:03:00.0: loaded firmware version 17.3216344376.0 7265-17.ucode op_mode iwlmvm [ 8.487508] input: HP HD Webcam: HP HD Webcam as /devices/pci0000:00/0000:00:14.0/usb2/2-7/2-7.2/2-7.2:1.0/input/input18 [ 8.487591] usbcore: registered new interface driver uvcvideo [ 8.494002] usbcore: registered new interface driver btusb [ 8.502340] checking generic (b0000000 7f0000) vs hw (c0000000 1000000) [ 8.502345] checking generic (b0000000 7f0000) vs hw (b0000000 10000000) [ 8.502347] fb0: switching to inteldrmfb from VESA VGA [ 8.502456] Console: switching to colour dummy device 80x25 [ 8.502515] i915 0000:00:02.0: vgaarb: deactivate vga console [ 8.502715] [drm] ACPI BIOS requests an excessive sleep of 5000 ms, using 1500 ms instead [ 8.513666] Bluetooth: hci0: read Intel version: 370810011002270d00 [ 8.517689] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.2.27.d.bseq [ 8.561180] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 8.579370] iwlwifi 0000:03:00.0: Detected Intel(R) Dual Band Wireless N 7265, REV=0x184 [ 8.601479] iwlwifi 0000:03:00.0: base HW address: 64:80:99:fc:0f:44 [ 8.606786] usbcore: registered new interface driver usbserial_generic [ 8.606801] usbserial: USB Serial support registered for generic [ 8.616025] usbcore: registered new interface driver qcserial [ 8.616040] usbserial: USB Serial support registered for Qualcomm USB modem [ 8.644091] cdc_ether 2-6:2.0 usb0: register 'cdc_ether' at usb-0000:00:14.0-6, CDC Ethernet Device, 02:1e:10:1f:00:00 [ 8.644158] usbcore: registered new interface driver cdc_ether [ 8.654158] qcserial 2-6:2.2: Qualcomm USB modem converter detected [ 8.654277] usb 2-6: Qualcomm USB modem converter now attached to ttyUSB0 [ 8.671806] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 8.693090] qcserial 2-6:2.3: Qualcomm USB modem converter detected [ 8.693217] usb 2-6: Qualcomm USB modem converter now attached to ttyUSB1 [ 8.792930] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3228: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 8.792938] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 8.792942] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0) [ 8.792946] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 8.792948] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 8.792950] snd_hda_codec_realtek hdaudioC1D0: Mic=0x1a [ 8.792952] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12 [ 8.815631] Bluetooth: hci0: unexpected event for opcode 0xfc2f [ 8.835647] Bluetooth: hci0: Intel BT fw patch 0x3b completed & activated [ 8.849593] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input19 [ 8.849665] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input20 [ 8.858153] intel_rapl_common: Found RAPL domain package [ 8.858156] intel_rapl_common: Found RAPL domain core [ 8.858157] intel_rapl_common: Found RAPL domain uncore [ 8.858159] intel_rapl_common: Found RAPL domain dram [ 8.861144] iwlwifi 0000:03:00.0 wlo1: renamed from wlan0 [ 8.935277] qcserial 2-6:2.4: Qualcomm USB modem converter detected [ 8.935391] usb 2-6: Qualcomm USB modem converter now attached to ttyUSB2 [ 8.944772] cdc_ether 2-6:2.0 enx021e101f0000: renamed from usb0 [ 9.577447] audit: type=1400 audit(1644411388.685:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ippusbxd" pid=655 comm="apparmor_parser" [ 9.587168] audit: type=1400 audit(1644411388.693:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="virt-aa-helper" pid=656 comm="apparmor_parser" [ 9.588928] audit: type=1400 audit(1644411388.693:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=653 comm="apparmor_parser" [ 9.588936] audit: type=1400 audit(1644411388.693:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=653 comm="apparmor_parser" [ 9.588940] audit: type=1400 audit(1644411388.693:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=653 comm="apparmor_parser" [ 9.588943] audit: type=1400 audit(1644411388.693:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/{,usr/}sbin/dhclient" pid=653 comm="apparmor_parser" [ 9.589493] audit: type=1400 audit(1644411388.693:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=659 comm="apparmor_parser" [ 9.594924] audit: type=1400 audit(1644411388.701:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libvirtd" pid=661 comm="apparmor_parser" [ 9.594932] audit: type=1400 audit(1644411388.701:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libvirtd//qemu_bridge_helper" pid=661 comm="apparmor_parser" [ 9.600801] audit: type=1400 audit(1644411388.705:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=663 comm="apparmor_parser" [ 9.715645] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0 [ 9.717380] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 9.720105] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input21 [ 9.720253] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 9.727315] fbcon: i915drmfb (fb0) is primary device [ 9.727395] Console: switching to colour frame buffer device 240x67 [ 9.727435] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device [ 9.791339] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input22 [ 9.791415] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input23 [ 9.791475] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input24 [ 9.791537] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input25 [ 9.791598] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input26 [ 10.166923] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 10.166930] Bluetooth: BNEP filters: protocol multicast [ 10.166935] Bluetooth: BNEP socket layer initialized [ 10.203008] NET: Registered protocol family 38 [ 10.866636] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 10.867722] virbr0: port 1(virbr0-nic) entered blocking state [ 10.867726] virbr0: port 1(virbr0-nic) entered disabled state [ 10.867781] device virbr0-nic entered promiscuous mode [ 10.934905] bpfilter: Loaded bpfilter_umh pid 1018 [ 10.935277] Started bpfilter [ 11.381648] virbr0: port 1(virbr0-nic) entered blocking state [ 11.381656] virbr0: port 1(virbr0-nic) entered listening state [ 11.483450] virbr0: port 1(virbr0-nic) entered disabled state [ 11.625817] loop13: detected capacity change from 0 to 8 [ 13.650124] rfkill: input handler disabled [ 14.430199] wlo1: authenticate with 88:9f:6f:bf:3f:2a [ 14.435004] wlo1: send auth to 88:9f:6f:bf:3f:2a (try 1/3) [ 14.437576] wlo1: authenticated [ 14.441282] wlo1: associate with 88:9f:6f:bf:3f:2a (try 1/3) [ 14.444847] wlo1: RX AssocResp from 88:9f:6f:bf:3f:2a (capab=0x8431 status=0 aid=1) [ 14.446282] wlo1: associated [ 14.549813] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [ 24.276383] Bluetooth: RFCOMM TTY layer initialized [ 24.276392] Bluetooth: RFCOMM socket layer initialized [ 24.276398] Bluetooth: RFCOMM ver 1.11 [ 24.402562] rfkill: input handler enabled [ 27.316088] rfkill: input handler disabled [ 1442.732612] wlo1: deauthenticating from 88:9f:6f:bf:3f:2a by local choice (Reason: 3=DEAUTH_LEAVING) [ 1448.811521] PM: suspend entry (deep) [ 1448.835879] Filesystems sync: 0.024 seconds [ 1448.836356] Freezing user space processes ... (elapsed 0.002 seconds) done. [ 1448.838893] OOM killer disabled. [ 1448.838894] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 1448.840130] printk: Suspending console(s) (use no_console_suspend to debug) [ 1448.981772] sd 3:0:0:0: [sda] Synchronizing SCSI cache [ 1448.989710] sd 3:0:0:0: [sda] Stopping disk [ 1448.991010] e1000e: EEE TX LPI TIMER: 00000011 [ 1449.090339] ACPI: EC: interrupt blocked [ 1449.142046] ACPI: Preparing to enter system sleep state S3 [ 1449.147319] ACPI: EC: event blocked [ 1449.147320] ACPI: EC: EC stopped [ 1449.147320] PM: Saving platform NVS memory [ 1449.147331] Disabling non-boot CPUs ... [ 1449.147790] IRQ 48: no longer affine to CPU1 [ 1449.148804] smpboot: CPU 1 is now offline [ 1449.149735] IRQ 49: no longer affine to CPU2 [ 1449.151048] smpboot: CPU 2 is now offline [ 1449.151813] IRQ 17: no longer affine to CPU3 [ 1449.151819] IRQ 44: no longer affine to CPU3 [ 1449.152823] smpboot: CPU 3 is now offline [ 1449.154268] ACPI: Low-level resume complete [ 1449.154355] ACPI: EC: EC started [ 1449.154357] PM: Restoring platform NVS memory [ 1449.165093] Enabling non-boot CPUs ... [ 1449.165148] x86: Booting SMP configuration: [ 1449.165149] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 1449.166334] CPU1 is up [ 1449.166374] smpboot: Booting Node 0 Processor 2 APIC 0x2 [ 1449.169621] CPU2 is up [ 1449.169654] smpboot: Booting Node 0 Processor 3 APIC 0x3 [ 1449.170791] CPU3 is up [ 1449.172724] ACPI: Waking up from system sleep state S3 [ 1449.189668] ACPI: EC: interrupt unblocked [ 1449.307783] ACPI: EC: event unblocked [ 1449.308527] usb usb2: root hub lost power or was reset [ 1449.308531] usb usb3: root hub lost power or was reset [ 1449.318761] sd 3:0:0:0: [sda] Starting disk [ 1449.575194] usb 1-1: reset high-speed USB device number 2 using ehci-pci [ 1449.634585] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1449.635104] ata4.00: supports DRM functions and may not be fully accessible [ 1449.639062] ata4.00: supports DRM functions and may not be fully accessible [ 1449.642437] ata4.00: configured for UDMA/133 [ 1449.807289] usb 2-4: reset full-speed USB device number 3 using xhci_hcd [ 1450.083263] usb 2-5: reset full-speed USB device number 4 using xhci_hcd [ 1450.359361] usb 2-8: reset full-speed USB device number 7 using xhci_hcd [ 1450.635260] usb 2-7: reset high-speed USB device number 6 using xhci_hcd [ 1450.771740] psmouse serio3: synaptics: queried max coordinates: x [..5676], y [..4690] [ 1450.804385] psmouse serio3: synaptics: queried min coordinates: x [1266..], y [1162..] [ 1450.915383] usb 2-2: reset full-speed USB device number 2 using xhci_hcd [ 1451.191342] usb 2-6: reset high-speed USB device number 5 using xhci_hcd [ 1451.531340] usb 2-7.1: reset full-speed USB device number 8 using xhci_hcd [ 1451.535139] qcserial ttyUSB0: Qualcomm USB modem converter now disconnected from ttyUSB0 [ 1451.535169] qcserial 2-6:2.2: device disconnected [ 1451.535321] qcserial ttyUSB1: Qualcomm USB modem converter now disconnected from ttyUSB1 [ 1451.535339] qcserial 2-6:2.3: device disconnected [ 1451.535490] qcserial ttyUSB2: Qualcomm USB modem converter now disconnected from ttyUSB2 [ 1451.535505] qcserial 2-6:2.4: device disconnected [ 1451.711393] usb 2-7.2: reset high-speed USB device number 9 using xhci_hcd [ 1451.885522] acpi LNXPOWER:04: Turning OFF [ 1451.885604] acpi LNXPOWER:02: Turning OFF [ 1451.885670] acpi LNXPOWER:01: Turning OFF [ 1451.885698] OOM killer enabled. [ 1451.885699] Restarting tasks ... [ 1451.885918] acpi PNP0501:00: Still not present [ 1451.887860] acpi PNP0501:00: Still not present [ 1451.895445] done. [ 1451.907215] acpi PNP0501:00: Still not present [ 1451.932865] qcserial 2-6:2.2: Qualcomm USB modem converter detected [ 1451.933018] usb 2-6: Qualcomm USB modem converter now attached to ttyUSB0 [ 1451.965173] PM: suspend exit [ 1451.972042] qcserial 2-6:2.3: Qualcomm USB modem converter detected [ 1451.972233] usb 2-6: Qualcomm USB modem converter now attached to ttyUSB1 [ 1452.020839] qcserial 2-6:2.4: Qualcomm USB modem converter detected [ 1452.020960] usb 2-6: Qualcomm USB modem converter now attached to ttyUSB2 [ 1452.042719] Bluetooth: hci0: read Intel version: 370810011002270d00 [ 1452.042730] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.2.27.d.bseq [ 1452.239641] e1000e 0000:00:19.0 enp0s25: NIC Link is Down [ 1452.296722] Bluetooth: hci0: unexpected event for opcode 0xfc2f [ 1452.316732] Bluetooth: hci0: Intel BT fw patch 0x3b completed & activated [ 1456.013791] wlo1: authenticate with 88:9f:6f:bf:3f:2a [ 1456.018883] wlo1: send auth to 88:9f:6f:bf:3f:2a (try 1/3) [ 1456.021713] wlo1: authenticated [ 1456.023472] wlo1: associate with 88:9f:6f:bf:3f:2a (try 1/3) [ 1456.027111] wlo1: RX AssocResp from 88:9f:6f:bf:3f:2a (capab=0x8431 status=0 aid=1) [ 1456.028190] wlo1: associated [ 1456.100044] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [ 3788.337019] usb 2-7.2: reset high-speed USB device number 9 using xhci_hcd [ 3816.400184] usb 2-7.2: USB disconnect, device number 9 [ 3817.135821] usb 2-7.2: new high-speed USB device number 10 using xhci_hcd [ 3817.319391] usb 2-7.2: New USB device found, idVendor=05c8, idProduct=0374, bcdDevice= 1.01 [ 3817.319406] usb 2-7.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3817.319411] usb 2-7.2: Product: HP HD Webcam [ 3817.319416] usb 2-7.2: Manufacturer: SunplusIT INC. [ 3817.392841] usb 2-7.2: Found UVC 1.00 device HP HD Webcam (05c8:0374) [ 3817.414637] input: HP HD Webcam: HP HD Webcam as /devices/pci0000:00/0000:00:14.0/usb2/2-7/2-7.2/2-7.2:1.0/input/input33 [ 5498.864026] perf: interrupt took too long (2532 > 2500), lowering kernel.perf_event_max_sample_rate to 78750 [ 7759.873058] usb 2-7.2: reset high-speed USB device number 10 using xhci_hcd [ 8086.389518] perf: interrupt took too long (3202 > 3165), lowering kernel.perf_event_max_sample_rate to 62250 [ 8699.981873] usb 2-6: USB disconnect, device number 5 [ 8699.982086] cdc_ether 2-6:2.0 enx021e101f0000: unregister 'cdc_ether' usb-0000:00:14.0-6, CDC Ethernet Device [ 8700.019700] qcserial ttyUSB0: Qualcomm USB modem converter now disconnected from ttyUSB0 [ 8700.019770] qcserial 2-6:2.2: device disconnected [ 8700.020219] qcserial ttyUSB1: Qualcomm USB modem converter now disconnected from ttyUSB1 [ 8700.020288] qcserial 2-6:2.3: device disconnected [ 8700.020708] qcserial ttyUSB2: Qualcomm USB modem converter now disconnected from ttyUSB2 [ 8700.020763] qcserial 2-6:2.4: device disconnected [ 8710.295491] usb 2-6: new high-speed USB device number 11 using xhci_hcd [ 8710.470223] usb 2-6: New USB device found, idVendor=03f0, idProduct=581d, bcdDevice= 2.28 [ 8710.470238] usb 2-6: New USB device strings: Mfr=2, Product=3, SerialNumber=4 [ 8710.470244] usb 2-6: Product: HP lt4112 Gobi 4G Module [ 8710.470248] usb 2-6: Manufacturer: Hewlett-Packard [ 8710.470252] usb 2-6: SerialNumber: 0123456712ABCA17 [ 8710.559104] cdc_ether 2-6:2.0 usb0: register 'cdc_ether' at usb-0000:00:14.0-6, CDC Ethernet Device, 02:1e:10:1f:00:00 [ 8710.574135] qcserial 2-6:2.2: Qualcomm USB modem converter detected [ 8710.574242] usb 2-6: Qualcomm USB modem converter now attached to ttyUSB0 [ 8710.588343] qcserial 2-6:2.3: Qualcomm USB modem converter detected [ 8710.588637] usb 2-6: Qualcomm USB modem converter now attached to ttyUSB1 [ 8710.799031] qcserial 2-6:2.4: Qualcomm USB modem converter detected [ 8710.799322] usb 2-6: Qualcomm USB modem converter now attached to ttyUSB2 [ 8710.857894] cdc_ether 2-6:2.0 enx021e101f0000: renamed from usb0 [ 8751.199923] wlo1: deauthenticated from 88:9f:6f:bf:3f:2a (Reason: 3=DEAUTH_LEAVING) [ 9845.822884] wlo1: authenticate with 88:9f:6f:bf:3f:2a [ 9845.828553] wlo1: send auth to 88:9f:6f:bf:3f:2a (try 1/3) [ 9845.831553] wlo1: authenticated [ 9845.835078] wlo1: associate with 88:9f:6f:bf:3f:2a (try 1/3) [ 9845.838804] wlo1: RX AssocResp from 88:9f:6f:bf:3f:2a (capab=0x431 status=0 aid=1) [ 9845.839898] wlo1: associated [ 9845.919951] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [10699.350134] L1TF CPU bug present and SMT on, data leak possible. See CVE-2018-3646 and https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/l1tf.html for details. [10888.511293] perf: interrupt took too long (4134 > 4002), lowering kernel.perf_event_max_sample_rate to 48250 [14319.847398] perf: interrupt took too long (5201 > 5167), lowering kernel.perf_event_max_sample_rate to 38250 [15187.674664] perf: interrupt took too long (6548 > 6501), lowering kernel.perf_event_max_sample_rate to 30500 [15765.860692] wlo1: deauthenticated from 88:9f:6f:bf:3f:2a (Reason: 3=DEAUTH_LEAVING) [15852.474812] PPP BSD Compression module registered [15852.484333] PPP Deflate Compression module registered [17629.957422] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [19289.104712] TCP: ppp0: Driver has suspect GRO implementation, TCP performance may be compromised.