[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31-20-generic (buildd@crested) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #58-Ubuntu SMP Fri Mar 12 04:38:19 UTC 2010 (Ubuntu 2.6.31-20.58-generic) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-20-generic root=UUID=03e246f8-cb9d-4bd9-a084-e74ed50beb35 ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cff90000 (usable) [ 0.000000] BIOS-e820: 00000000cff90000 - 00000000cffa0000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cffa0000 - 00000000cffe0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cffe0000 - 00000000d0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable) [ 0.000000] DMI present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x130000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000130000000 aka 4864M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xcff90 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009f800 (usable) [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e6000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000cff90000 (usable) [ 0.000000] modified: 00000000cff90000 - 00000000cffa0000 (ACPI data) [ 0.000000] modified: 00000000cffa0000 - 00000000cffe0000 (ACPI NVS) [ 0.000000] modified: 00000000cffe0000 - 00000000d0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fef00000 (reserved) [ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000130000000 (usable) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: 0000000000000000-00000000cff90000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0000000000 - 00c0000000 page 1G [ 0.000000] 00c0000000 - 00cfe00000 page 2M [ 0.000000] 00cfe00000 - 00cff90000 page 4k [ 0.000000] kernel direct mapping tables up to cff90000 @ 10000-13000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000130000000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0100000000 - 0130000000 page 2M [ 0.000000] kernel direct mapping tables up to 130000000 @ 12000-14000 [ 0.000000] RAMDISK: 3786c000 - 37fef034 [ 0.000000] ACPI: RSDP 00000000000fbf80 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 00000000cff90000 00040 (v01 080309 RSDT2102 20090803 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000cff90200 00084 (v01 A M I OEMFACP 12000601 MSFT 00000097) [ 0.000000] ACPI: DSDT 00000000cff90450 068EB (v01 AS231 AS231102 00000102 INTL 20051117) [ 0.000000] ACPI: FACS 00000000cffa0000 00040 [ 0.000000] ACPI: APIC 00000000cff90390 00080 (v01 080309 APIC2102 20090803 MSFT 00000097) [ 0.000000] ACPI: MCFG 00000000cff90410 0003C (v01 080309 OEMMCFG 20090803 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000cffa0040 00072 (v01 080309 OEMB2102 20090803 MSFT 00000097) [ 0.000000] ACPI: AAFT 00000000cff96d40 00027 (v01 080309 OEMAAFT 20090803 MSFT 00000097) [ 0.000000] ACPI: INFO 00000000cffa00c0 00124 (v01 080309 AMDINFO 20090803 MSFT 00000097) [ 0.000000] ACPI: SSDT 00000000cff96d70 0088C (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000130000000 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000130000000 [ 0.000000] NODE_DATA [0000000000013000 - 0000000000017fff] [ 0.000000] bootmap [0000000000018000 - 000000000003dfff] pages 26 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0130000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 00019e8c8c] TEXT DATA BSS ==> [0001000000 - 00019e8c8c] [ 0.000000] #3 [003786c000 - 0037fef034] RAMDISK ==> [003786c000 - 0037fef034] [ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #5 [00019e9000 - 00019e912b] BRK ==> [00019e9000 - 00019e912b] [ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] [ 0.000000] #7 [0000012000 - 0000013000] PGTABLE ==> [0000012000 - 0000013000] [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780 [ 0.000000] [ffffea0000000000-ffffea00043fffff] PMD -> [ffff880028600000-ffff88002bffffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00130000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000cff90 [ 0.000000] 0: 0x00100000 -> 0x00130000 [ 0.000000] On node 0 totalpages: 1048351 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 102 pages reserved [ 0.000000] DMA zone: 3825 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 833480 pages, LIFO batch:31 [ 0.000000] Normal zone: 2688 pages used for memmap [ 0.000000] Normal zone: 193920 pages, LIFO batch:31 [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] ACPI: PM-Timer IO Port: 0x2008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000 [ 0.000000] PM: Registered nosave memory: 00000000000e6000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000cff90000 - 00000000cffa0000 [ 0.000000] PM: Registered nosave memory: 00000000cffa0000 - 00000000cffe0000 [ 0.000000] PM: Registered nosave memory: 00000000cffe0000 - 00000000d0000000 [ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fef00000 [ 0.000000] PM: Registered nosave memory: 00000000fef00000 - 00000000fff00000 [ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:2ec00000) [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages at ffff880028022000, static data 90720 bytes [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031225 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-20-generic root=UUID=03e246f8-cb9d-4bd9-a084-e74ed50beb35 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ 50de000000 size 32 MB [ 0.000000] Aperture beyond 4GB. Ignoring. [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ 20000000 [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000024000000 [ 0.000000] Memory: 4049912k/4980736k available (5327k kernel code, 787332k absent, 143492k reserved, 3014k data, 664k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] NR_IRQS:4352 nr_irqs:440 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 3000.409 MHz processor. [ 0.000012] spurious 8259A interrupt: IRQ7. [ 0.001489] Console: colour VGA+ 80x25 [ 0.001491] console [tty0] enabled [ 0.010000] allocated 41943040 bytes of page_cgroup [ 0.010000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.010006] Calibrating delay loop (skipped), value calculated using timer frequency.. 6000.81 BogoMIPS (lpj=30004050) [ 0.010025] Security Framework initialized [ 0.010040] AppArmor: AppArmor initialized [ 0.010255] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.011516] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.012095] Mount-cache hash table entries: 256 [ 0.012189] Initializing cgroup subsys ns [ 0.012192] Initializing cgroup subsys cpuacct [ 0.012194] Initializing cgroup subsys memory [ 0.012199] Initializing cgroup subsys freezer [ 0.012201] Initializing cgroup subsys net_cls [ 0.012209] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.012211] CPU: L2 Cache: 512K (64 bytes/line) [ 0.012213] CPU 0/0x0 -> Node 0 [ 0.012215] tseg: 0000000000 [ 0.012226] CPU: Physical Processor ID: 0 [ 0.012227] CPU: Processor Core ID: 0 [ 0.012229] mce: CPU supports 6 MCE banks [ 0.012236] using C1E aware idle routine [ 0.012237] Performance Counters: AMD PMU driver. [ 0.012240] ... version: 0 [ 0.012241] ... bit width: 48 [ 0.012242] ... generic counters: 4 [ 0.012243] ... value mask: 0000ffffffffffff [ 0.012245] ... max period: 00007fffffffffff [ 0.012246] ... fixed-purpose counters: 0 [ 0.012247] ... counter mask: 000000000000000f [ 0.013415] ACPI: Core revision 20090521 [ 0.022627] Setting APIC routing to flat [ 0.023087] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 0.123125] CPU0: AMD Phenom(tm) II X4 945 Processor stepping 03 [ 0.130000] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.010000] Initializing CPU#1 [ 0.010000] Calibrating delay using timer specific routine.. 6000.09 BogoMIPS (lpj=30000468) [ 0.010000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.010000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.010000] CPU 1/0x1 -> Node 0 [ 0.010000] CPU: Physical Processor ID: 0 [ 0.010000] CPU: Processor Core ID: 1 [ 0.010000] mce: CPU supports 6 MCE banks [ 0.010000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.280875] CPU1: AMD Phenom(tm) II X4 945 Processor stepping 03 [ 0.280885] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.290046] Booting processor 2 APIC 0x2 ip 0x6000 [ 0.010000] Initializing CPU#2 [ 0.010000] Calibrating delay using timer specific routine.. 6000.10 BogoMIPS (lpj=30000507) [ 0.010000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.010000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.010000] CPU 2/0x2 -> Node 0 [ 0.010000] CPU: Physical Processor ID: 0 [ 0.010000] CPU: Processor Core ID: 2 [ 0.010000] mce: CPU supports 6 MCE banks [ 0.010000] x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106 [ 0.450915] CPU2: AMD Phenom(tm) II X4 945 Processor stepping 03 [ 0.450925] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 0.460045] Booting processor 3 APIC 0x3 ip 0x6000 [ 0.010000] Initializing CPU#3 [ 0.010000] Calibrating delay using timer specific routine.. 6000.09 BogoMIPS (lpj=30000482) [ 0.010000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.010000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.010000] CPU 3/0x3 -> Node 0 [ 0.010000] CPU: Physical Processor ID: 0 [ 0.010000] CPU: Processor Core ID: 3 [ 0.010000] mce: CPU supports 6 MCE banks [ 0.010000] x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106 [ 0.620925] CPU3: AMD Phenom(tm) II X4 945 Processor stepping 03 [ 0.620934] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 0.630009] Brought up 4 CPUs [ 0.630010] Total of 4 processors activated (24001.10 BogoMIPS). [ 0.630101] CPU0 attaching sched-domain: [ 0.630103] domain 0: span 0-3 level MC [ 0.630104] groups: 0 1 2 3 [ 0.630109] CPU1 attaching sched-domain: [ 0.630110] domain 0: span 0-3 level MC [ 0.630111] groups: 1 2 3 0 [ 0.630114] CPU2 attaching sched-domain: [ 0.630116] domain 0: span 0-3 level MC [ 0.630117] groups: 2 3 0 1 [ 0.630120] CPU3 attaching sched-domain: [ 0.630121] domain 0: span 0-3 level MC [ 0.630122] groups: 3 0 1 2 [ 0.630179] Booting paravirtualized kernel on bare hardware [ 0.630179] regulator: core version 0.5 [ 0.630179] Time: 12:07:22 Date: 04/05/10 [ 0.630179] NET: Registered protocol family 16 [ 0.630179] node 0 link 0: io port [1000, ffffff] [ 0.630179] TOM: 00000000d0000000 aka 3328M [ 0.630179] Fam 10h mmconf [e0000000, efffffff] [ 0.630180] node 0 link 0: mmio [e0000000, efffffff] ==> none [ 0.630182] node 0 link 0: mmio [d0000000, dfffffff] [ 0.630184] node 0 link 0: mmio [f0000000, fe0bffff] [ 0.630186] node 0 link 0: mmio [a0000, bffff] [ 0.630188] TOM2: 0000000130000000 aka 4864M [ 0.630189] bus: [00,07] on node 0 link 0 [ 0.630191] bus: 00 index 0 io port: [0, ffff] [ 0.630192] bus: 00 index 1 mmio: [d0000000, dfffffff] [ 0.630194] bus: 00 index 2 mmio: [f0000000, ffffffff] [ 0.630195] bus: 00 index 3 mmio: [a0000, bffff] [ 0.630196] bus: 00 index 4 mmio: [130000000, fcffffffff] [ 0.630208] ACPI: bus type pci registered [ 0.630260] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.630262] PCI: Not using MMCONFIG. [ 0.630263] PCI: Using configuration type 1 for base access [ 0.630264] PCI: Using configuration type 1 for extended access [ 0.630718] bio: create slab at 0 [ 0.630718] ACPI: EC: Look up EC in DSDT [ 0.643154] ACPI: Interpreter enabled [ 0.643157] ACPI: (supports S0 S1 S3 S4 S5) [ 0.643170] ACPI: Using IOAPIC for interrupt routing [ 0.643212] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.647345] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources [ 0.653056] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.661953] ACPI Warning: Incorrect checksum in table [OEMB] - 84, should be 83 20090521 tbutils-246 [ 0.662077] ACPI: No dock devices found. [ 0.662384] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.662631] pci 0000:00:01.0: reg 10 io port: [0x2f00-0x2fff] [ 0.662667] pci 0000:00:01.1: reg 10 io port: [0x2900-0x293f] [ 0.662676] pci 0000:00:01.1: reg 20 io port: [0x2d00-0x2d3f] [ 0.662680] pci 0000:00:01.1: reg 24 io port: [0x2e00-0x2e3f] [ 0.662698] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.662703] pci 0000:00:01.1: PME# disabled [ 0.662754] pci 0000:00:01.3: reg 10 32bit mmio: [0xf9f80000-0xf9ffffff] [ 0.662873] pci 0000:00:02.0: reg 10 32bit mmio: [0xf9f7f000-0xf9f7ffff] [ 0.662893] pci 0000:00:02.0: supports D1 D2 [ 0.662895] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.662897] pci 0000:00:02.0: PME# disabled [ 0.662917] pci 0000:00:02.1: reg 10 32bit mmio: [0xf9f7ec00-0xf9f7ecff] [ 0.662941] pci 0000:00:02.1: supports D1 D2 [ 0.662942] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.662945] pci 0000:00:02.1: PME# disabled [ 0.662968] pci 0000:00:04.0: reg 10 32bit mmio: [0xf9f7d000-0xf9f7dfff] [ 0.662988] pci 0000:00:04.0: supports D1 D2 [ 0.662990] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.662992] pci 0000:00:04.0: PME# disabled [ 0.663012] pci 0000:00:04.1: reg 10 32bit mmio: [0xf9f7e800-0xf9f7e8ff] [ 0.663036] pci 0000:00:04.1: supports D1 D2 [ 0.663037] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.663040] pci 0000:00:04.1: PME# disabled [ 0.663070] pci 0000:00:06.0: reg 20 io port: [0xffa0-0xffaf] [ 0.663097] pci 0000:00:07.0: reg 10 32bit mmio: [0xf9f78000-0xf9f7bfff] [ 0.663117] pci 0000:00:07.0: PME# supported from D3hot D3cold [ 0.663120] pci 0000:00:07.0: PME# disabled [ 0.663163] pci 0000:00:09.0: reg 10 io port: [0xd480-0xd487] [ 0.663166] pci 0000:00:09.0: reg 14 io port: [0xd400-0xd403] [ 0.663169] pci 0000:00:09.0: reg 18 io port: [0xd080-0xd087] [ 0.663171] pci 0000:00:09.0: reg 1c io port: [0xd000-0xd003] [ 0.663174] pci 0000:00:09.0: reg 20 io port: [0xcc00-0xcc0f] [ 0.663177] pci 0000:00:09.0: reg 24 32bit mmio: [0xf9f76000-0xf9f77fff] [ 0.663209] pci 0000:00:0a.0: reg 10 32bit mmio: [0xf9f7c000-0xf9f7cfff] [ 0.663212] pci 0000:00:0a.0: reg 14 io port: [0xc880-0xc887] [ 0.663215] pci 0000:00:0a.0: reg 18 32bit mmio: [0xf9f7e400-0xf9f7e4ff] [ 0.663218] pci 0000:00:0a.0: reg 1c 32bit mmio: [0xf9f7e000-0xf9f7e00f] [ 0.663236] pci 0000:00:0a.0: supports D1 D2 [ 0.663237] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.663241] pci 0000:00:0a.0: PME# disabled [ 0.663446] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.663453] pci 0000:00:10.0: PME# disabled [ 0.663687] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.663693] pci 0000:00:12.0: PME# disabled [ 0.663926] pci 0000:00:13.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.663933] pci 0000:00:13.0: PME# disabled [ 0.664167] pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.664173] pci 0000:00:14.0: PME# disabled [ 0.664295] pci 0000:00:08.0: transparent bridge [ 0.664325] pci 0000:02:00.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff] [ 0.664332] pci 0000:02:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff] [ 0.664338] pci 0000:02:00.0: reg 1c 64bit mmio: [0xfa000000-0xfbffffff] [ 0.664342] pci 0000:02:00.0: reg 24 io port: [0xec00-0xec7f] [ 0.664346] pci 0000:02:00.0: reg 30 32bit mmio: [0xfeb80000-0xfebfffff] [ 0.664409] pci 0000:00:10.0: bridge io port: [0xe000-0xefff] [ 0.664416] pci 0000:00:10.0: bridge 32bit mmio: [0xfa000000-0xfebfffff] [ 0.664429] pci 0000:00:10.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.664498] pci 0000:00:12.0: bridge 64bit mmio pref: [0xf8d00000-0xf8dfffff] [ 0.664567] pci 0000:00:13.0: bridge 64bit mmio pref: [0xf8e00000-0xf8efffff] [ 0.664636] pci 0000:00:14.0: bridge 64bit mmio pref: [0xf8f00000-0xf8ffffff] [ 0.664686] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.664878] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.664952] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MXR0._PRT] [ 0.664997] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT] [ 0.665041] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR13._PRT] [ 0.665084] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR14._PRT] [ 0.676166] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled. [ 0.676346] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled. [ 0.676524] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled. [ 0.676701] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled. [ 0.676881] ACPI: PCI Interrupt Link [LN0A] (IRQs 16 17 18 19) *10 [ 0.677058] ACPI: PCI Interrupt Link [LN0B] (IRQs 16 17 18 19) *0, disabled. [ 0.677234] ACPI: PCI Interrupt Link [LN0C] (IRQs 16 17 18 19) *0, disabled. [ 0.677412] ACPI: PCI Interrupt Link [LN0D] (IRQs 16 17 18 19) *0, disabled. [ 0.677589] ACPI: PCI Interrupt Link [LN1A] (IRQs 16 17 18 19) *0, disabled. [ 0.677766] ACPI: PCI Interrupt Link [LN1B] (IRQs 16 17 18 19) *0, disabled. [ 0.677943] ACPI: PCI Interrupt Link [LN1C] (IRQs 16 17 18 19) *0, disabled. [ 0.678120] ACPI: PCI Interrupt Link [LN1D] (IRQs 16 17 18 19) *0, disabled. [ 0.678300] ACPI: PCI Interrupt Link [LN2A] (IRQs 16 17 18 19) *11 [ 0.678477] ACPI: PCI Interrupt Link [LN2B] (IRQs 16 17 18 19) *0, disabled. [ 0.678654] ACPI: PCI Interrupt Link [LN2C] (IRQs 16 17 18 19) *0, disabled. [ 0.678833] ACPI: PCI Interrupt Link [LN2D] (IRQs 16 17 18 19) *0, disabled. [ 0.679014] ACPI: PCI Interrupt Link [LN3A] (IRQs 16 17 18 19) *15 [ 0.679191] ACPI: PCI Interrupt Link [LN3B] (IRQs 16 17 18 19) *0, disabled. [ 0.679368] ACPI: PCI Interrupt Link [LN3C] (IRQs 16 17 18 19) *0, disabled. [ 0.679545] ACPI: PCI Interrupt Link [LN3D] (IRQs 16 17 18 19) *0, disabled. [ 0.679726] ACPI: PCI Interrupt Link [LN4A] (IRQs 16 17 18 19) *7 [ 0.679903] ACPI: PCI Interrupt Link [LN4B] (IRQs 16 17 18 19) *0, disabled. [ 0.680093] ACPI: PCI Interrupt Link [LN4C] (IRQs 16 17 18 19) *0, disabled. [ 0.680270] ACPI: PCI Interrupt Link [LN4D] (IRQs 16 17 18 19) *0, disabled. [ 0.680448] ACPI: PCI Interrupt Link [LN5A] (IRQs 16 17 18 19) *0, disabled. [ 0.680625] ACPI: PCI Interrupt Link [LN5B] (IRQs 16 17 18 19) *0, disabled. [ 0.680805] ACPI: PCI Interrupt Link [LN5C] (IRQs 16 17 18 19) *0, disabled. [ 0.680996] ACPI: PCI Interrupt Link [LN5D] (IRQs 16 17 18 19) *0, disabled. [ 0.681174] ACPI: PCI Interrupt Link [LN6A] (IRQs 16 17 18 19) *0, disabled. [ 0.681352] ACPI: PCI Interrupt Link [LN6B] (IRQs 16 17 18 19) *0, disabled. [ 0.681529] ACPI: PCI Interrupt Link [LN6C] (IRQs 16 17 18 19) *0, disabled. [ 0.681707] ACPI: PCI Interrupt Link [LN6D] (IRQs 16 17 18 19) *0, disabled. [ 0.681884] ACPI: PCI Interrupt Link [LN7A] (IRQs 16 17 18 19) *0, disabled. [ 0.682062] ACPI: PCI Interrupt Link [LN7B] (IRQs 16 17 18 19) *0, disabled. [ 0.682239] ACPI: PCI Interrupt Link [LN7C] (IRQs 16 17 18 19) *0, disabled. [ 0.682416] ACPI: PCI Interrupt Link [LN7D] (IRQs 16 17 18 19) *0, disabled. [ 0.682598] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *15 [ 0.682781] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *10 [ 0.682963] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *10 [ 0.683144] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *15 [ 0.683323] ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *0, disabled. [ 0.683507] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *10 [ 0.683688] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *11 [ 0.683869] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5 [ 0.684075] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled. [ 0.684256] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *10 [ 0.684437] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *11 [ 0.684542] SCSI subsystem initialized [ 0.684560] libata version 3.00 loaded. [ 0.684560] usbcore: registered new interface driver usbfs [ 0.684560] usbcore: registered new interface driver hub [ 0.684560] usbcore: registered new device driver usb [ 0.684560] ACPI: WMI: Mapper loaded [ 0.684560] PCI: Using ACPI for IRQ routing [ 0.710012] Bluetooth: Core ver 2.15 [ 0.710030] NET: Registered protocol family 31 [ 0.710030] Bluetooth: HCI device and connection manager initialized [ 0.710030] Bluetooth: HCI socket layer initialized [ 0.710030] NetLabel: Initializing [ 0.710030] NetLabel: domain hash size = 128 [ 0.710030] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.710030] NetLabel: unlabeled traffic allowed by default [ 0.710273] PCI-DMA: Disabling AGP. [ 0.710340] PCI-DMA: aperture base @ 20000000 size 65536 KB [ 0.710341] PCI-DMA: using GART IOMMU. [ 0.710344] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 0.740020] pnp: PnP ACPI init [ 0.740036] ACPI: bus type pnp registered [ 0.744321] pnp: PnP ACPI: found 11 devices [ 0.744322] ACPI: ACPI bus type pnp unregistered [ 0.744331] system 00:04: ioport range 0x4d0-0x4d1 has been reserved [ 0.744333] system 00:04: ioport range 0x800-0x80f has been reserved [ 0.744334] system 00:04: ioport range 0x2000-0x207f has been reserved [ 0.744336] system 00:04: ioport range 0x2080-0x20ff has been reserved [ 0.744338] system 00:04: ioport range 0x2400-0x247f has been reserved [ 0.744339] system 00:04: ioport range 0x2480-0x24ff has been reserved [ 0.744341] system 00:04: ioport range 0x2800-0x287f has been reserved [ 0.744344] system 00:04: ioport range 0x2880-0x28ff has been reserved [ 0.744347] system 00:04: iomem range 0xfed04000-0xfed04fff has been reserved [ 0.744349] system 00:04: iomem range 0xfee01000-0xfeefffff has been reserved [ 0.744352] system 00:06: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.744354] system 00:06: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.744357] system 00:08: ioport range 0x280-0x28f has been reserved [ 0.744359] system 00:08: ioport range 0x290-0x29f has been reserved [ 0.744362] system 00:09: iomem range 0xe0000000-0xefffffff has been reserved [ 0.744365] system 00:0a: iomem range 0x0-0x9ffff could not be reserved [ 0.744367] system 00:0a: iomem range 0xc0000-0xcffff has been reserved [ 0.744369] system 00:0a: iomem range 0xe0000-0xfffff could not be reserved [ 0.744370] system 00:0a: iomem range 0x100000-0xcfffffff could not be reserved [ 0.744372] system 00:0a: iomem range 0xfec00000-0xffffffff could not be reserved [ 0.748998] AppArmor: AppArmor Filesystem Enabled [ 0.749079] pci 0000:00:08.0: PCI bridge, secondary bus 0000:01 [ 0.749080] pci 0000:00:08.0: IO window: disabled [ 0.749083] pci 0000:00:08.0: MEM window: disabled [ 0.749085] pci 0000:00:08.0: PREFETCH window: disabled [ 0.749087] pci 0000:00:10.0: PCI bridge, secondary bus 0000:02 [ 0.749092] pci 0000:00:10.0: IO window: 0xe000-0xefff [ 0.749101] pci 0000:00:10.0: MEM window: 0xfa000000-0xfebfffff [ 0.749108] pci 0000:00:10.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff [ 0.749119] pci 0000:00:12.0: PCI bridge, secondary bus 0000:03 [ 0.749121] pci 0000:00:12.0: IO window: disabled [ 0.749129] pci 0000:00:12.0: MEM window: disabled [ 0.749136] pci 0000:00:12.0: PREFETCH window: 0x000000f8d00000-0x000000f8dfffff [ 0.749147] pci 0000:00:13.0: PCI bridge, secondary bus 0000:04 [ 0.749148] pci 0000:00:13.0: IO window: disabled [ 0.749157] pci 0000:00:13.0: MEM window: disabled [ 0.749163] pci 0000:00:13.0: PREFETCH window: 0x000000f8e00000-0x000000f8efffff [ 0.749175] pci 0000:00:14.0: PCI bridge, secondary bus 0000:05 [ 0.749176] pci 0000:00:14.0: IO window: disabled [ 0.749184] pci 0000:00:14.0: MEM window: disabled [ 0.749190] pci 0000:00:14.0: PREFETCH window: 0x000000f8f00000-0x000000f8ffffff [ 0.749206] pci 0000:00:08.0: setting latency timer to 64 [ 0.749477] ACPI: PCI Interrupt Link [LN0A] enabled at IRQ 19 [ 0.749480] alloc irq_desc for 19 on node 0 [ 0.749481] alloc kstat_irqs on node 0 [ 0.749488] pci 0000:00:10.0: PCI INT A -> Link[LN0A] -> GSI 19 (level, low) -> IRQ 19 [ 0.749495] pci 0000:00:10.0: setting latency timer to 64 [ 0.749758] ACPI: PCI Interrupt Link [LN2A] enabled at IRQ 18 [ 0.749760] alloc irq_desc for 18 on node 0 [ 0.749761] alloc kstat_irqs on node 0 [ 0.749766] pci 0000:00:12.0: PCI INT A -> Link[LN2A] -> GSI 18 (level, low) -> IRQ 18 [ 0.749773] pci 0000:00:12.0: setting latency timer to 64 [ 0.750047] ACPI: PCI Interrupt Link [LN3A] enabled at IRQ 17 [ 0.750048] alloc irq_desc for 17 on node 0 [ 0.750049] alloc kstat_irqs on node 0 [ 0.750055] pci 0000:00:13.0: PCI INT A -> Link[LN3A] -> GSI 17 (level, low) -> IRQ 17 [ 0.750062] pci 0000:00:13.0: setting latency timer to 64 [ 0.750323] ACPI: PCI Interrupt Link [LN4A] enabled at IRQ 16 [ 0.750324] alloc irq_desc for 16 on node 0 [ 0.750325] alloc kstat_irqs on node 0 [ 0.750331] pci 0000:00:14.0: PCI INT A -> Link[LN4A] -> GSI 16 (level, low) -> IRQ 16 [ 0.750338] pci 0000:00:14.0: setting latency timer to 64 [ 0.750343] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.750344] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.750346] pci_bus 0000:01: resource 3 io: [0x00-0xffff] [ 0.750348] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.750350] pci_bus 0000:02: resource 0 io: [0xe000-0xefff] [ 0.750351] pci_bus 0000:02: resource 1 mem: [0xfa000000-0xfebfffff] [ 0.750353] pci_bus 0000:02: resource 2 pref mem [0xd0000000-0xdfffffff] [ 0.750355] pci_bus 0000:03: resource 2 pref mem [0xf8d00000-0xf8dfffff] [ 0.750356] pci_bus 0000:04: resource 2 pref mem [0xf8e00000-0xf8efffff] [ 0.750358] pci_bus 0000:05: resource 2 pref mem [0xf8f00000-0xf8ffffff] [ 0.750384] NET: Registered protocol family 2 [ 0.750493] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.751227] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.753363] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.753669] TCP: Hash tables configured (established 524288 bind 65536) [ 0.753671] TCP reno registered [ 0.753743] NET: Registered protocol family 1 [ 0.753786] Trying to unpack rootfs image as initramfs... [ 0.875456] Freeing initrd memory: 7692k freed [ 0.877813] Scanning for low memory corruption every 60 seconds [ 0.877905] audit: initializing netlink socket (disabled) [ 0.877916] type=2000 audit(1270469241.869:1): initialized [ 0.883796] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.884661] VFS: Disk quotas dquot_6.5.2 [ 0.884695] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.885055] fuse init (API version 7.12) [ 0.885104] msgmni has been set to 7925 [ 0.885287] alg: No test for stdrng (krng) [ 0.885298] io scheduler noop registered [ 0.885300] io scheduler anticipatory registered [ 0.885302] io scheduler deadline registered [ 0.885326] io scheduler cfq registered (default) [ 0.940135] pci 0000:00:08.0: Enabling HT MSI Mapping [ 0.940234] pci 0000:00:09.0: Enabling HT MSI Mapping [ 0.940337] pci 0000:00:0a.0: Enabling HT MSI Mapping [ 0.940567] pci 0000:02:00.0: Boot video device [ 0.940938] alloc irq_desc for 24 on node 0 [ 0.940940] alloc kstat_irqs on node 0 [ 0.940957] pcieport-driver 0000:00:10.0: irq 24 for MSI/MSI-X [ 0.940975] pcieport-driver 0000:00:10.0: setting latency timer to 64 [ 0.941359] alloc irq_desc for 25 on node 0 [ 0.941360] alloc kstat_irqs on node 0 [ 0.941375] pcieport-driver 0000:00:12.0: irq 25 for MSI/MSI-X [ 0.941393] pcieport-driver 0000:00:12.0: setting latency timer to 64 [ 0.941756] alloc irq_desc for 26 on node 0 [ 0.941757] alloc kstat_irqs on node 0 [ 0.941771] pcieport-driver 0000:00:13.0: irq 26 for MSI/MSI-X [ 0.941789] pcieport-driver 0000:00:13.0: setting latency timer to 64 [ 0.942151] alloc irq_desc for 27 on node 0 [ 0.942152] alloc kstat_irqs on node 0 [ 0.942167] pcieport-driver 0000:00:14.0: irq 27 for MSI/MSI-X [ 0.942184] pcieport-driver 0000:00:14.0: setting latency timer to 64 [ 0.942333] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.942347] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.942425] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.942428] ACPI: Power Button [PWRF] [ 0.942464] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 0.942465] ACPI: Power Button [PWRB] [ 0.942678] processor LNXCPU:00: registered as cooling_device0 [ 0.942698] processor LNXCPU:01: registered as cooling_device1 [ 0.942718] processor LNXCPU:02: registered as cooling_device2 [ 0.942738] processor LNXCPU:03: registered as cooling_device3 [ 0.946910] Linux agpgart interface v0.103 [ 0.946916] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.947001] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.947187] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.947722] brd: module loaded [ 0.947967] loop: module loaded [ 0.948007] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.948101] ahci 0000:00:09.0: version 3.0 [ 0.948379] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23 [ 0.948382] alloc irq_desc for 23 on node 0 [ 0.948383] alloc kstat_irqs on node 0 [ 0.948390] ahci 0000:00:09.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23 [ 0.948420] alloc irq_desc for 28 on node 0 [ 0.948421] alloc kstat_irqs on node 0 [ 0.948425] ahci 0000:00:09.0: irq 28 for MSI/MSI-X [ 0.948474] ahci 0000:00:09.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl IDE mode [ 0.948476] ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pmp pio [ 0.948478] ahci 0000:00:09.0: setting latency timer to 64 [ 0.948768] scsi0 : ahci [ 0.948823] scsi1 : ahci [ 0.948856] scsi2 : ahci [ 0.948887] scsi3 : ahci [ 0.948919] scsi4 : ahci [ 0.948953] scsi5 : ahci [ 0.949022] ata1: SATA max UDMA/133 abar m8192@0xf9f76000 port 0xf9f76100 irq 28 [ 0.949024] ata2: SATA max UDMA/133 abar m8192@0xf9f76000 port 0xf9f76180 irq 28 [ 0.949026] ata3: SATA max UDMA/133 abar m8192@0xf9f76000 port 0xf9f76200 irq 28 [ 0.949027] ata4: SATA max UDMA/133 abar m8192@0xf9f76000 port 0xf9f76280 irq 28 [ 0.949029] ata5: SATA max UDMA/133 abar m8192@0xf9f76000 port 0xf9f76300 irq 28 [ 0.949031] ata6: SATA max UDMA/133 abar m8192@0xf9f76000 port 0xf9f76380 irq 28 [ 0.949202] pata_amd 0000:00:06.0: version 0.4.1 [ 0.949225] pata_amd 0000:00:06.0: setting latency timer to 64 [ 0.949297] scsi6 : pata_amd [ 0.949337] scsi7 : pata_amd [ 0.950043] ata7: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 0.950045] ata8: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 0.950428] Fixed MDIO Bus: probed [ 0.950446] PPP generic driver version 2.4.2 [ 0.950498] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.950823] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22 [ 0.950825] alloc irq_desc for 22 on node 0 [ 0.950826] alloc kstat_irqs on node 0 [ 0.950833] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 22 (level, low) -> IRQ 22 [ 0.950841] ehci_hcd 0000:00:02.1: setting latency timer to 64 [ 0.950843] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 0.950860] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 0.950881] ehci_hcd 0000:00:02.1: debug port 1 [ 0.950884] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported [ 0.950898] ehci_hcd 0000:00:02.1: irq 22, io mem 0xf9f7ec00 [ 0.969974] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00 [ 0.970030] usb usb1: configuration #1 chosen from 1 choice [ 0.970046] hub 1-0:1.0: USB hub found [ 0.970051] hub 1-0:1.0: 6 ports detected [ 0.970380] ACPI: PCI Interrupt Link [UB12] enabled at IRQ 21 [ 0.970382] alloc irq_desc for 21 on node 0 [ 0.970383] alloc kstat_irqs on node 0 [ 0.970389] ehci_hcd 0000:00:04.1: PCI INT B -> Link[UB12] -> GSI 21 (level, low) -> IRQ 21 [ 0.970397] ehci_hcd 0000:00:04.1: setting latency timer to 64 [ 0.970399] ehci_hcd 0000:00:04.1: EHCI Host Controller [ 0.970418] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2 [ 0.970439] ehci_hcd 0000:00:04.1: debug port 1 [ 0.970442] ehci_hcd 0000:00:04.1: cache line size of 64 is not supported [ 0.970457] ehci_hcd 0000:00:04.1: irq 21, io mem 0xf9f7e800 [ 0.989972] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00 [ 0.990018] usb usb2: configuration #1 chosen from 1 choice [ 0.990033] hub 2-0:1.0: USB hub found [ 0.990037] hub 2-0:1.0: 6 ports detected [ 0.990076] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.990374] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 20 [ 0.990376] alloc irq_desc for 20 on node 0 [ 0.990377] alloc kstat_irqs on node 0 [ 0.990383] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 20 (level, low) -> IRQ 20 [ 0.990391] ohci_hcd 0000:00:02.0: setting latency timer to 64 [ 0.990393] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 0.990411] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3 [ 0.990432] ohci_hcd 0000:00:02.0: irq 20, io mem 0xf9f7f000 [ 1.052010] usb usb3: configuration #1 chosen from 1 choice [ 1.052025] hub 3-0:1.0: USB hub found [ 1.052030] hub 3-0:1.0: 6 ports detected [ 1.052353] ACPI: PCI Interrupt Link [UB11] enabled at IRQ 23 [ 1.052355] ohci_hcd 0000:00:04.0: PCI INT A -> Link[UB11] -> GSI 23 (level, low) -> IRQ 23 [ 1.052364] ohci_hcd 0000:00:04.0: setting latency timer to 64 [ 1.052365] ohci_hcd 0000:00:04.0: OHCI Host Controller [ 1.052384] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 4 [ 1.052403] ohci_hcd 0000:00:04.0: irq 23, io mem 0xf9f7d000 [ 1.111999] usb usb4: configuration #1 chosen from 1 choice [ 1.112017] hub 4-0:1.0: USB hub found [ 1.112022] hub 4-0:1.0: 6 ports detected [ 1.112060] uhci_hcd: USB Universal Host Controller Interface driver [ 1.112117] PNP: No PS/2 controller found. Probing ports directly. [ 1.114691] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.114704] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.114755] mice: PS/2 mouse device common for all mice [ 1.114818] rtc_cmos 00:05: RTC can wake from S4 [ 1.114839] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 1.114887] rtc0: alarms up to one year, y3k, 114 bytes nvram [ 1.114960] device-mapper: uevent: version 1.0.3 [ 1.115021] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 1.115097] device-mapper: multipath: version 1.1.0 loaded [ 1.115099] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1.115258] cpuidle: using governor ladder [ 1.115259] cpuidle: using governor menu [ 1.115508] TCP cubic registered [ 1.115581] NET: Registered protocol family 10 [ 1.115857] lo: Disabled Privacy Extensions [ 1.116036] NET: Registered protocol family 17 [ 1.116047] Bluetooth: L2CAP ver 2.13 [ 1.116048] Bluetooth: L2CAP socket layer initialized [ 1.116050] Bluetooth: SCO (Voice Link) ver 0.6 [ 1.116051] Bluetooth: SCO socket layer initialized [ 1.116094] Bluetooth: RFCOMM TTY layer initialized [ 1.116095] Bluetooth: RFCOMM socket layer initialized [ 1.116096] Bluetooth: RFCOMM ver 1.11 [ 1.121996] powernow-k8: Found 1 AMD Phenom(tm) II X4 945 Processor processors (4 cpu cores) (version 2.20.00) [ 1.122032] powernow-k8: 0 : pstate 0 (3000 MHz) [ 1.122033] powernow-k8: 1 : pstate 1 (2300 MHz) [ 1.122034] powernow-k8: 2 : pstate 2 (1800 MHz) [ 1.122036] powernow-k8: 3 : pstate 3 (800 MHz) [ 1.122291] PM: Resume from disk failed. [ 1.122297] registered taskstats version 1 [ 1.122377] Magic number: 6:697:126 [ 1.122407] acpi device:01: hash matches [ 1.122466] rtc_cmos 00:05: setting system clock to 2010-04-05 12:07:22 UTC (1270469242) [ 1.122468] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.122469] EDD information not available. [ 1.260838] Switched to high resolution mode on CPU 1 [ 1.260874] Switched to high resolution mode on CPU 2 [ 1.260890] Switched to high resolution mode on CPU 3 [ 1.261268] ata4: SATA link down (SStatus 0 SControl 300) [ 1.261281] ata5: SATA link down (SStatus 0 SControl 300) [ 1.261296] ata6: SATA link down (SStatus 0 SControl 300) [ 1.261304] ata2: SATA link down (SStatus 0 SControl 300) [ 1.261312] ata3: SATA link down (SStatus 0 SControl 300) [ 1.269932] Switched to high resolution mode on CPU 0 [ 1.440019] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.441032] ata1.00: ATA-8: ST3500418AS, CC38, max UDMA/133 [ 1.441034] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.442246] ata1.00: configured for UDMA/133 [ 1.442326] scsi 0:0:0:0: Direct-Access ATA ST3500418AS CC38 PQ: 0 ANSI: 5 [ 1.442398] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.442424] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 1.442446] sd 0:0:0:0: [sda] Write Protect is off [ 1.442447] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.442458] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.442522] sda: [ 1.442606] ata8: port disabled. ignoring. [ 1.448466] sda1 sda2 < sda5 > [ 1.472011] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.472021] Freeing unused kernel memory: 664k freed [ 1.472148] Write protecting the kernel read-only data: 7596k [ 1.543579] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 1.543917] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22 [ 1.543922] forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 22 (level, low) -> IRQ 22 [ 1.543926] forcedeth 0000:00:0a.0: setting latency timer to 64 [ 1.571290] usb 3-2: new low speed USB device using ohci_hcd and address 2 [ 1.631147] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 3, addr 00:19:66:f8:f9:32 [ 1.631150] forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt gbit lnktim msi desc-v3 [ 1.810934] usb 3-2: configuration #1 chosen from 1 choice [ 1.844288] usbcore: registered new interface driver hiddev [ 1.851029] input: PS/2+USB Mouse as /devices/pci0000:00/0000:00:02.0/usb3/3-2/3-2:1.0/input/input3 [ 1.851072] generic-usb 0003:1267:0210.0001: input,hidraw0: USB HID v1.00 Mouse [PS/2+USB Mouse] on usb-0000:00:02.0-2/input0 [ 1.851084] usbcore: registered new interface driver usbhid [ 1.851085] usbhid: v2.6:USB HID core driver [ 2.210014] usb 4-2: new low speed USB device using ohci_hcd and address 2 [ 2.451845] usb 4-2: configuration #1 chosen from 1 choice [ 2.468953] input: USB Keyboard as /devices/pci0000:00/0000:00:04.0/usb4/4-2/4-2:1.0/input/input4 [ 2.468987] generic-usb 0003:04D9:1702.0002: input,hidraw1: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:04.0-2/input0 [ 2.493826] input: USB Keyboard as /devices/pci0000:00/0000:00:04.0/usb4/4-2/4-2:1.1/input/input5 [ 2.493863] generic-usb 0003:04D9:1702.0003: input,hidraw2: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:04.0-2/input1 [ 2.720870] PM: Starting manual resume from disk [ 2.720873] PM: Resume from partition 8:5 [ 2.720874] PM: Checking hibernation image. [ 2.721024] PM: Resume from disk failed. [ 2.728209] EXT4-fs (sda1): INFO: recovery required on readonly filesystem [ 2.728212] EXT4-fs (sda1): write access will be enabled during recovery [ 2.749890] EXT4-fs (sda1): barriers enabled [ 5.379706] kjournald2 starting: pid 433, dev sda1:8, commit interval 5 seconds [ 5.379790] EXT4-fs (sda1): delayed allocation enabled [ 5.379793] EXT4-fs: file extents enabled [ 5.408564] EXT4-fs: mballoc enabled [ 5.408576] EXT4-fs (sda1): orphan cleanup on readonly fs [ 5.408582] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 13331 [ 5.408646] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 3540533 [ 5.408664] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 3539480 [ 5.408673] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 3539423 [ 5.408682] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 3539422 [ 5.408690] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 3540529 [ 5.408705] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 3540528 [ 5.408713] EXT4-fs (sda1): 7 orphan inodes deleted [ 5.408714] EXT4-fs (sda1): recovery complete [ 5.597983] EXT4-fs (sda1): mounted filesystem with ordered data mode [ 5.943032] type=1505 audit(1270469247.320:2): operation="profile_load" pid=460 name=/usr/share/gdm/guest-session/Xsession [ 5.944875] type=1505 audit(1270469247.320:3): operation="profile_load" pid=461 name=/sbin/dhclient3 [ 5.945067] type=1505 audit(1270469247.320:4): operation="profile_load" pid=461 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 5.945175] type=1505 audit(1270469247.320:5): operation="profile_load" pid=461 name=/usr/lib/connman/scripts/dhclient-script [ 5.964354] type=1505 audit(1270469247.340:6): operation="profile_load" pid=462 name=/usr/bin/evince [ 5.967417] type=1505 audit(1270469247.340:7): operation="profile_load" pid=462 name=/usr/bin/evince-previewer [ 5.969269] type=1505 audit(1270469247.340:8): operation="profile_load" pid=462 name=/usr/bin/evince-thumbnailer [ 5.973210] type=1505 audit(1270469247.348:9): operation="profile_load" pid=464 name=/usr/lib/cups/backend/cups-pdf [ 5.973447] type=1505 audit(1270469247.348:10): operation="profile_load" pid=464 name=/usr/sbin/cupsd [ 5.982013] type=1505 audit(1270469247.348:11): operation="profile_load" pid=465 name=/usr/sbin/tcpdump [ 13.071916] udev: starting version 147 [ 13.088856] Adding 11888060k swap on /dev/sda5. Priority:-1 extents:1 across:11888060k [ 13.089676] lp: driver loaded but no devices found [ 13.093849] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x2d00 [ 13.093853] ACPI: I/O resource nForce2_smbus [0x2e00-0x2e3f] conflicts with ACPI region SM00 [0x2e00-0x2e3f] [ 13.093855] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 13.093857] nForce2_smbus 0000:00:01.1: Error probing SMB2. [ 13.097594] EDAC MC: Ver: 2.1.0 Mar 12 2010 [ 13.102925] EDAC amd64_edac: Ver: 3.2.0 Mar 12 2010 [ 13.102975] EDAC amd64: This node reports that Memory ECC is currently disabled. [ 13.102977] EDAC amd64: bit 0x400000 in register F3x44 of the MISC_CONTROL device (0000:00:18.3) should be enabled [ 13.102979] EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded. [ 13.102980] Either Enable ECC in the BIOS, or use the 'ecc_enable_override' parameter. [ 13.102981] Might be a BIOS bug, if BIOS says ECC is enabled [ 13.102982] Use of the override can cause unknown side effects. [ 13.102994] amd64_edac: probe of 0000:00:18.2 failed with error -22 [ 13.127092] nvidia: module license 'NVIDIA' taints kernel. [ 13.127095] Disabling lock debugging due to kernel taint [ 13.140909] ip_tables: (C) 2000-2006 Netfilter Core Team [ 13.295825] EXT4-fs (sda1): internal journal on sda1:8 [ 13.380617] HDA Intel 0000:00:07.0: power state changed by ACPI to D0 [ 13.380903] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21 [ 13.380907] HDA Intel 0000:00:07.0: PCI INT A -> Link[LAZA] -> GSI 21 (level, low) -> IRQ 21 [ 13.380941] HDA Intel 0000:00:07.0: setting latency timer to 64 [ 13.381015] type=1505 audit(1270469254.751:12): operation="profile_replace" pid=880 name=/usr/share/gdm/guest-session/Xsession [ 13.382001] type=1505 audit(1270469254.751:13): operation="profile_replace" pid=886 name=/sbin/dhclient3 [ 13.382196] type=1505 audit(1270469254.751:14): operation="profile_replace" pid=886 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 13.382305] type=1505 audit(1270469254.751:15): operation="profile_replace" pid=886 name=/usr/lib/connman/scripts/dhclient-script [ 13.383903] nvidia 0000:02:00.0: PCI INT A -> Link[LN0A] -> GSI 19 (level, low) -> IRQ 19 [ 13.383909] nvidia 0000:02:00.0: setting latency timer to 64 [ 13.384114] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 185.18.36 Fri Aug 14 17:35:21 PDT 2009 [ 13.385687] type=1505 audit(1270469254.761:16): operation="profile_replace" pid=888 name=/usr/bin/evince [ 13.388844] type=1505 audit(1270469254.761:17): operation="profile_replace" pid=888 name=/usr/bin/evince-previewer [ 13.390715] type=1505 audit(1270469254.761:18): operation="profile_replace" pid=888 name=/usr/bin/evince-thumbnailer [ 13.394228] type=1505 audit(1270469254.771:19): operation="profile_replace" pid=956 name=/usr/lib/cups/backend/cups-pdf [ 13.394466] type=1505 audit(1270469254.771:20): operation="profile_replace" pid=956 name=/usr/sbin/cupsd [ 13.395576] type=1505 audit(1270469254.771:21): operation="profile_replace" pid=957 name=/usr/sbin/tcpdump [ 13.471134] alloc irq_desc for 29 on node 0 [ 13.471137] alloc kstat_irqs on node 0 [ 13.471144] forcedeth 0000:00:0a.0: irq 29 for MSI/MSI-X [ 13.688868] ppdev: user-space parallel port driver [ 14.382872] usplash:396 freeing invalid memtype fffffffffb000000-fffffffffbe00000 [ 23.583762] eth0: no IPv6 routers present [ 429.303737] type=1505 audit(1270469678.128:22): operation="profile_load" pid=2458 name=/usr/sbin/named [ 443.759853] type=1505 audit(1270469692.582:23): operation="profile_load" pid=2708 name=/usr/sbin/dhcpd3