[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-22-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #33-Ubuntu SMP Wed Apr 28 13:27:30 UTC 2010 (Ubuntu 2.6.32-22.33-generic 2.6.32.11+drm33.2) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d8000 - 00000000000e0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000001bf70000 (usable) [ 0.000000] BIOS-e820: 000000001bf70000 - 000000001bf7c000 (ACPI data) [ 0.000000] BIOS-e820: 000000001bf7c000 - 000000001bf80000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000001bf80000 - 000000001c000000 (reserved) [ 0.000000] BIOS-e820: 000000002bf80000 - 000000002c000000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.3 present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x1bf70 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DBFFF uncachable [ 0.000000] DC000-DFFFF write-back [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FF0000000 write-back [ 0.000000] 1 base 010000000 mask FF8000000 write-back [ 0.000000] 2 base 018000000 mask FFC000000 write-back [ 0.000000] 3 base 01BF80000 mask FFFF80000 uncachable [ 0.000000] 4 base 02BF80000 mask FFFF80000 uncachable [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009f800 (usable) [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000d8000 - 00000000000e0000 (reserved) [ 0.000000] modified: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000001bf70000 (usable) [ 0.000000] modified: 000000001bf70000 - 000000001bf7c000 (ACPI data) [ 0.000000] modified: 000000001bf7c000 - 000000001bf80000 (ACPI NVS) [ 0.000000] modified: 000000001bf80000 - 000000001c000000 (reserved) [ 0.000000] modified: 000000002bf80000 - 000000002c000000 (reserved) [ 0.000000] modified: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-000000001bf70000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 001bc00000 page 2M [ 0.000000] 001bc00000 - 001bf70000 page 4k [ 0.000000] kernel direct mapping tables up to 1bf70000 @ 10000-15000 [ 0.000000] RAMDISK: 1483c000 - 14fd345c [ 0.000000] ACPI: RSDP 000f6ab0 00014 (v00 PTLTD ) [ 0.000000] ACPI: RSDT 1bf752a9 0002C (v01 PTLTD RSDT 06040000 LTP 00000000) [ 0.000000] ACPI: FACP 1bf7bf64 00074 (v01 ATI Salmon 06040000 ATI 000F4240) [ 0.000000] ACPI: DSDT 1bf752d5 06C8F (v01 ATI MS2_1535 06040000 MSFT 0100000E) [ 0.000000] ACPI: FACS 1bf7cfc0 00040 [ 0.000000] ACPI: BOOT 1bf7bfd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 447MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 1bf70000 [ 0.000000] low ram: 0 - 1bf70000 [ 0.000000] node 0 low ram: 00000000 - 1bf70000 [ 0.000000] node 0 bootmap 00011000 - 000147f0 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 001bf70000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008d9e98] TEXT DATA BSS ==> [0000100000 - 00008d9e98] [ 0.000000] #4 [001483c000 - 0014fd345c] RAMDISK ==> [001483c000 - 0014fd345c] [ 0.000000] #5 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #6 [00008da000 - 00008dd240] BRK ==> [00008da000 - 00008dd240] [ 0.000000] #7 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] [ 0.000000] #8 [0000011000 - 0000015000] BOOTMAP ==> [0000011000 - 0000015000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x0001bf70 [ 0.000000] HighMem 0x0001bf70 -> 0x0001bf70 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0001bf70 [ 0.000000] On node 0 totalpages: 114431 [ 0.000000] free_area_init_node: node 0, pgdat c0798720, node_mem_map c1001200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 863 pages used for memmap [ 0.000000] Normal zone: 109585 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x8008 [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" [ 0.000000] APIC: disable apic facility [ 0.000000] nr_irqs_gsi: 16 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d8000 [ 0.000000] PM: Registered nosave memory: 00000000000d8000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 00000000000e4000 [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 2c000000 (gap: 2c000000:d3f80000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c1400000 s36024 r0 d21320 u4194304 [ 0.000000] pcpu-alloc: s36024 r0 d21320 u4194304 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 113536 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-22-generic root=UUID=5c472be0-bb8b-4e5d-ad8c-f286981177ac ro quiet splash [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 2290560 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (00000000:00000000) [ 0.000000] Memory: 435248k/458176k available (4673k kernel code, 22148k reserved, 2121k data, 656k init, 0k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xdc770000 - 0xff7fe000 ( 560 MB) [ 0.000000] lowmem : 0xc0000000 - 0xdbf70000 ( 447 MB) [ 0.000000] .init : 0xc07a3000 - 0xc0847000 ( 656 kB) [ 0.000000] .data : 0xc0590653 - 0xc07a2e48 (2121 kB) [ 0.000000] .text : 0xc0100000 - 0xc0590653 (4673 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:256 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2592.187 MHz processor. [ 0.008024] Calibrating delay loop (skipped), value calculated using timer frequency.. 5184.37 BogoMIPS (lpj=10368748) [ 0.008116] Security Framework initialized [ 0.008227] AppArmor: AppArmor initialized [ 0.008285] Mount-cache hash table entries: 512 [ 0.008974] Initializing cgroup subsys ns [ 0.009010] Initializing cgroup subsys cpuacct [ 0.009027] Initializing cgroup subsys memory [ 0.009076] Initializing cgroup subsys devices [ 0.009088] Initializing cgroup subsys freezer [ 0.009095] Initializing cgroup subsys net_cls [ 0.009228] CPU: Trace cache: 12K uops, L1 D cache: 8K [ 0.009241] CPU: L2 cache: 128K [ 0.009251] CPU: Hyper-Threading is disabled [ 0.009268] mce: CPU supports 4 MCE banks [ 0.009349] Performance Events: no PMU driver, software events only. [ 0.009387] Checking 'hlt' instruction... OK. [ 0.026869] SMP alternatives: switching to UP code [ 0.053166] Freeing SMP alternatives: 19k freed [ 0.053249] ACPI: Core revision 20090903 [ 0.103887] ACPI: setting ELCR to 0200 (from 0420) [ 0.104047] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.104064] ftrace: allocating 21771 entries in 43 pages [ 0.108247] Enabling APIC mode: Flat. Using 0 I/O APICs [ 0.108256] weird, boot CPU (#0) not listed by the BIOS. [ 0.108260] SMP motherboard not detected. [ 0.108265] Local APIC not detected. Using dummy APIC emulation. [ 0.108268] SMP disabled [ 0.108808] Brought up 1 CPUs [ 0.108822] Total of 1 processors activated (5184.37 BogoMIPS). [ 0.109292] CPU0 attaching NULL sched-domain. [ 0.112129] devtmpfs: initialized [ 0.113169] regulator: core version 0.5 [ 0.113230] Time: 20:53:50 Date: 12/07/10 [ 0.113397] NET: Registered protocol family 16 [ 0.113781] EISA bus registered [ 0.113842] ACPI: bus type pci registered [ 0.179010] PCI: PCI BIOS revision 2.10 entry at 0xfd89b, last bus=2 [ 0.179018] PCI: Using configuration type 1 for base access [ 0.181889] bio: create slab at 0 [ 0.183373] ACPI: EC: Look up EC in DSDT [ 0.193271] ACPI: Interpreter enabled [ 0.193271] ACPI: (supports S0 S3 S4 S5) [ 0.193271] ACPI: Using PIC for interrupt routing [ 0.213002] ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62 [ 0.213350] ACPI: No dock devices found. [ 0.214812] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.214948] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xd4000000-0xd7ffffff] [ 0.214956] pci 0000:00:00.0: reg 14 32bit mmio pref: [0xd0009000-0xd0009fff] [ 0.215056] pci 0000:00:06.0: reg 10 io port: [0x1000-0x10ff] [ 0.215064] pci 0000:00:06.0: reg 14 32bit mmio: [0xd0000000-0xd0000fff] [ 0.215099] pci 0000:00:06.0: supports D1 D2 [ 0.215103] pci 0000:00:06.0: PME# supported from D2 D3hot D3cold [ 0.215109] pci 0000:00:06.0: PME# disabled [ 0.215208] pci 0000:00:08.0: reg 10 32bit mmio: [0xd0001000-0xd0001fff] [ 0.215216] pci 0000:00:08.0: reg 14 io port: [0x1400-0x14ff] [ 0.215249] pci 0000:00:08.0: PME# supported from D3hot D3cold [ 0.215254] pci 0000:00:08.0: PME# disabled [ 0.215303] pci 0000:00:0a.0: reg 10 32bit mmio: [0xd0002000-0xd0002fff] [ 0.215323] pci 0000:00:0a.0: supports D1 D2 [ 0.215326] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.215332] pci 0000:00:0a.0: PME# disabled [ 0.215379] pci 0000:00:0b.0: reg 20 io port: [0x2000-0x201f] [ 0.215450] pci 0000:00:0b.1: reg 20 io port: [0x2020-0x203f] [ 0.215516] pci 0000:00:0b.2: reg 10 32bit mmio: [0xd0003000-0xd00030ff] [ 0.215556] pci 0000:00:0b.2: PME# supported from D0 D3hot [ 0.215561] pci 0000:00:0b.2: PME# disabled [ 0.215604] pci 0000:00:0c.0: reg 10 32bit mmio: [0xd0003800-0xd0003fff] [ 0.215612] pci 0000:00:0c.0: reg 14 32bit mmio: [0xd0004000-0xd0007fff] [ 0.215648] pci 0000:00:0c.0: supports D1 D2 [ 0.215652] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot [ 0.215656] pci 0000:00:0c.0: PME# disabled [ 0.215707] pci 0000:00:10.0: reg 20 io port: [0x2040-0x204f] [ 0.216084] pci 0000:00:11.0: quirk: region 8000-803f claimed by ali7101 ACPI [ 0.216090] pci 0000:00:11.0: quirk: region 8040-805f claimed by ali7101 SMB [ 0.216132] pci 0000:00:12.0: reg 10 io port: [0x2400-0x24ff] [ 0.216141] pci 0000:00:12.0: reg 14 32bit mmio: [0xd0008000-0xd0008fff] [ 0.216162] pci 0000:00:12.0: reg 30 32bit mmio pref: [0x000000-0x00ffff] [ 0.216181] pci 0000:00:12.0: supports D1 D2 [ 0.216183] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.216189] pci 0000:00:12.0: PME# disabled [ 0.216269] pci 0000:01:05.0: reg 10 32bit mmio pref: [0xd8000000-0xdfffffff] [ 0.216279] pci 0000:01:05.0: reg 14 io port: [0x9000-0x90ff] [ 0.216287] pci 0000:01:05.0: reg 18 32bit mmio: [0xd0300000-0xd030ffff] [ 0.216304] pci 0000:01:05.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] [ 0.216328] pci 0000:01:05.0: supports D1 D2 [ 0.216369] pci 0000:00:01.0: bridge io port: [0x9000-0x9fff] [ 0.216373] pci 0000:00:01.0: bridge 32bit mmio: [0xd0300000-0xd03fffff] [ 0.216379] pci 0000:00:01.0: bridge 32bit mmio pref: [0xd8000000-0xdfffffff] [ 0.216415] pci_bus 0000:00: on NUMA node 0 [ 0.216439] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.216561] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT] [ 0.220116] ACPI: PCI Interrupt Link [LNK0] (IRQs 7 10) *0, disabled. [ 0.220485] ACPI: PCI Interrupt Link [LNK1] (IRQs 7 *10) [ 0.220839] ACPI: PCI Interrupt Link [LNK2] (IRQs 7 *10) [ 0.221189] ACPI: PCI Interrupt Link [LNK3] (IRQs 7 *10) [ 0.221546] ACPI: PCI Interrupt Link [LNK4] (IRQs 7 10) *0, disabled. [ 0.221896] ACPI: PCI Interrupt Link [LNK5] (IRQs 7 11) *0, disabled. [ 0.222244] ACPI: PCI Interrupt Link [LNK6] (IRQs 7 10) *0, disabled. [ 0.222593] ACPI: PCI Interrupt Link [LNK7] (IRQs *5) [ 0.222947] ACPI: PCI Interrupt Link [LNK8] (IRQs 7 10) *0, disabled. [ 0.223335] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none [ 0.223344] vgaarb: loaded [ 0.223729] SCSI subsystem initialized [ 0.224109] libata version 3.00 loaded. [ 0.224504] usbcore: registered new interface driver usbfs [ 0.224544] usbcore: registered new interface driver hub [ 0.224730] usbcore: registered new device driver usb [ 0.225435] ACPI: WMI: Mapper loaded [ 0.225444] PCI: Using ACPI for IRQ routing [ 0.225821] NetLabel: Initializing [ 0.225832] NetLabel: domain hash size = 128 [ 0.225834] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.225879] NetLabel: unlabeled traffic allowed by default [ 0.226057] Switching to clocksource tsc [ 0.228001] AppArmor: AppArmor Filesystem Enabled [ 0.228001] pnp: PnP ACPI init [ 0.228001] ACPI: bus type pnp registered [ 0.231154] pnp 00:07: io resource (0x8004-0x8005) overlaps 0000:00:11.0 BAR 13 (0x8000-0x803f), disabling [ 0.236302] pnp: PnP ACPI: found 11 devices [ 0.236312] ACPI: ACPI bus type pnp unregistered [ 0.236322] PnPBIOS: Disabled by ACPI PNP [ 0.236378] system 00:07: ioport range 0x40b-0x40b has been reserved [ 0.236386] system 00:07: ioport range 0x480-0x48f has been reserved [ 0.236391] system 00:07: ioport range 0x4d0-0x4d1 has been reserved [ 0.236395] system 00:07: ioport range 0x4d6-0x4d6 has been reserved [ 0.236401] system 00:07: ioport range 0x8000-0x807f could not be reserved [ 0.236405] system 00:07: ioport range 0xff00-0xff01 has been reserved [ 0.236410] system 00:07: ioport range 0x80f0-0x80f3 has been reserved [ 0.236414] system 00:07: ioport range 0xfe00-0xfefe has been reserved [ 0.236424] system 00:07: iomem range 0xd0009000-0xd0009fff has been reserved [ 0.271746] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.271753] pci 0000:00:01.0: IO window: 0x9000-0x9fff [ 0.271762] pci 0000:00:01.0: MEM window: 0xd0300000-0xd03fffff [ 0.271768] pci 0000:00:01.0: PREFETCH window: 0xd8000000-0xdfffffff [ 0.271776] pci 0000:00:0a.0: CardBus bridge, secondary bus 0000:02 [ 0.271779] pci 0000:00:0a.0: IO window: 0x001800-0x0018ff [ 0.271784] pci 0000:00:0a.0: IO window: 0x001c00-0x001cff [ 0.271789] pci 0000:00:0a.0: PREFETCH window: 0x2c000000-0x2fffffff [ 0.271794] pci 0000:00:0a.0: MEM window: 0x30000000-0x33ffffff [ 0.271823] pci 0000:00:0a.0: enabling device (0000 -> 0003) [ 0.272326] ACPI: PCI Interrupt Link [LNK5] enabled at IRQ 11 [ 0.272334] PCI: setting IRQ 11 as level-triggered [ 0.272341] pci 0000:00:0a.0: PCI INT A -> Link[LNK5] -> GSI 11 (level, low) -> IRQ 11 [ 0.272363] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.272366] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.272371] pci_bus 0000:01: resource 0 io: [0x9000-0x9fff] [ 0.272375] pci_bus 0000:01: resource 1 mem: [0xd0300000-0xd03fffff] [ 0.272378] pci_bus 0000:01: resource 2 pref mem [0xd8000000-0xdfffffff] [ 0.272383] pci_bus 0000:02: resource 0 io: [0x1800-0x18ff] [ 0.272386] pci_bus 0000:02: resource 1 io: [0x1c00-0x1cff] [ 0.272389] pci_bus 0000:02: resource 2 pref mem [0x2c000000-0x2fffffff] [ 0.272392] pci_bus 0000:02: resource 3 mem: [0x30000000-0x33ffffff] [ 0.272482] NET: Registered protocol family 2 [ 0.272691] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.273252] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.273449] TCP bind hash table entries: 16384 (order: 5, 131072 bytes) [ 0.273913] TCP: Hash tables configured (established 16384 bind 16384) [ 0.273926] TCP reno registered [ 0.274218] NET: Registered protocol family 1 [ 0.274292] pci 0000:00:07.0: Activating ISA DMA hang workarounds [ 0.274365] pci 0000:01:05.0: Boot video device [ 0.274597] Simple Boot Flag at 0x37 set to 0x1 [ 0.274830] cpufreq-nforce2: No nForce2 chipset. [ 0.274932] Scanning for low memory corruption every 60 seconds [ 0.275308] audit: initializing netlink socket (disabled) [ 0.275347] type=2000 audit(1291755230.273:1): initialized [ 0.284164] Trying to unpack rootfs image as initramfs... [ 0.294290] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.301201] VFS: Disk quotas dquot_6.5.2 [ 0.301406] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.303414] fuse init (API version 7.13) [ 0.303808] msgmni has been set to 850 [ 0.310884] alg: No test for stdrng (krng) [ 0.311162] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.311172] io scheduler noop registered [ 0.311175] io scheduler anticipatory registered [ 0.311177] io scheduler deadline registered [ 0.311323] io scheduler cfq registered (default) [ 0.311608] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.311670] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.312245] ACPI: AC Adapter [ACAD] (on-line) [ 0.312557] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.312568] ACPI: Power Button [PWRB] [ 0.312686] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 0.315491] ACPI: Lid Switch [LID] [ 0.315698] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.315710] ACPI: Power Button [PWRF] [ 0.316318] Marking TSC unstable due to TSC halts in idle [ 0.317242] processor LNXCPU:00: registered as cooling_device0 [ 0.325956] Switching to clocksource acpi_pm [ 0.328251] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.328279] ACPI: Thermal Zone [THRM] (61 C) [ 0.336646] ACPI: Battery Slot [BAT1] (battery absent) [ 0.336716] isapnp: Scanning for PnP cards... [ 0.349700] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.350082] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.350784] serial 0000:00:08.0: enabling device (0000 -> 0003) [ 0.351291] ACPI: PCI Interrupt Link [LNK6] enabled at IRQ 10 [ 0.351300] PCI: setting IRQ 10 as level-triggered [ 0.351307] serial 0000:00:08.0: PCI INT A -> Link[LNK6] -> GSI 10 (level, low) -> IRQ 10 [ 0.351322] serial 0000:00:08.0: PCI INT A disabled [ 0.403293] brd: module loaded [ 0.405194] loop: module loaded [ 0.405594] input: Macintosh mouse button emulation as /devices/virtual/input/input3 [ 0.406052] pata_acpi 0000:00:10.0: can't derive routing for PCI INT A [ 0.406180] pata_acpi 0000:00:10.0: can't derive routing for PCI INT A [ 0.407029] Fixed MDIO Bus: probed [ 0.407142] PPP generic driver version 2.4.2 [ 0.407371] tun: Universal TUN/TAP device driver, 1.6 [ 0.407378] tun: (C) 1999-2004 Max Krasnyansky [ 0.407770] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.407838] ehci_hcd 0000:00:0b.2: enabling device (0010 -> 0012) [ 0.407860] ehci_hcd 0000:00:0b.2: PCI INT C -> Link[LNK5] -> GSI 11 (level, low) -> IRQ 11 [ 0.407908] ehci_hcd 0000:00:0b.2: EHCI Host Controller [ 0.412245] ehci_hcd 0000:00:0b.2: new USB bus registered, assigned bus number 1 [ 0.412360] ehci_hcd 0000:00:0b.2: irq 11, io mem 0xd0003000 [ 0.424157] ehci_hcd 0000:00:0b.2: USB 2.0 started, EHCI 0.95 [ 0.424502] usb usb1: configuration #1 chosen from 1 choice [ 0.424613] hub 1-0:1.0: USB hub found [ 0.424651] hub 1-0:1.0: 4 ports detected [ 0.424817] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.424870] uhci_hcd: USB Universal Host Controller Interface driver [ 0.425470] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 10 [ 0.425481] uhci_hcd 0000:00:0b.0: PCI INT A -> Link[LNK2] -> GSI 10 (level, low) -> IRQ 10 [ 0.425505] uhci_hcd 0000:00:0b.0: UHCI Host Controller [ 0.425722] uhci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2 [ 0.425781] uhci_hcd 0000:00:0b.0: irq 10, io base 0x00002000 [ 0.426106] usb usb2: configuration #1 chosen from 1 choice [ 0.426211] hub 2-0:1.0: USB hub found [ 0.426248] hub 2-0:1.0: 2 ports detected [ 0.426844] ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 10 [ 0.426856] uhci_hcd 0000:00:0b.1: PCI INT B -> Link[LNK3] -> GSI 10 (level, low) -> IRQ 10 [ 0.426881] uhci_hcd 0000:00:0b.1: UHCI Host Controller [ 0.427091] uhci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 3 [ 0.427149] uhci_hcd 0000:00:0b.1: irq 10, io base 0x00002020 [ 0.427475] usb usb3: configuration #1 chosen from 1 choice [ 0.427576] hub 3-0:1.0: USB hub found [ 0.427612] hub 3-0:1.0: 2 ports detected [ 0.427871] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 [ 0.435994] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.436105] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.441032] mice: PS/2 mouse device common for all mice [ 0.441906] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 0.441978] rtc0: alarms up to one month, y3k, 242 bytes nvram [ 0.442360] device-mapper: uevent: version 1.0.3 [ 0.446647] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.446996] device-mapper: multipath: version 1.1.0 loaded [ 0.447006] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.447598] EISA: Probing bus 0 at eisa.0 [ 0.447618] Cannot allocate resource for EISA slot 1 [ 0.447623] Cannot allocate resource for EISA slot 2 [ 0.447653] Cannot allocate resource for EISA slot 8 [ 0.447657] EISA: Detected 0 cards. [ 0.452469] cpuidle: using governor ladder [ 0.452619] cpuidle: using governor menu [ 0.453407] TCP cubic registered [ 0.453942] NET: Registered protocol family 10 [ 0.455062] lo: Disabled Privacy Extensions [ 0.455633] NET: Registered protocol family 17 [ 0.455846] Using IPI No-Shortcut mode [ 0.456454] PM: Resume from disk failed. [ 0.456504] registered taskstats version 1 [ 0.456861] Magic number: 6:25:902 [ 0.457092] rtc_cmos 00:02: setting system clock to 2010-12-07 20:53:50 UTC (1291755230) [ 0.457100] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.457103] EDD information not available. [ 0.520630] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 0.772150] usb 1-2: new high speed USB device using ehci_hcd and address 2 [ 1.035958] isapnp: No Plug & Play device found [ 1.126358] Freeing initrd memory: 7773k freed [ 1.146510] usb 1-2: configuration #1 chosen from 1 choice [ 1.146620] Freeing unused kernel memory: 656k freed [ 1.148868] Write protecting the kernel text: 4676k [ 1.148916] Write protecting the kernel read-only data: 1840k [ 1.223683] udev: starting version 151 [ 1.632210] usb 3-1: new low speed USB device using uhci_hcd and address 2 [ 1.807590] usb 3-1: configuration #1 chosen from 1 choice [ 1.819854] Floppy drive(s): fd0 is 1.44M [ 1.839678] FDC 0 is a post-1991 82077 [ 1.917186] pata_ali 0000:00:10.0: can't derive routing for PCI INT A [ 1.931242] scsi0 : pata_ali [ 1.940188] scsi1 : pata_ali [ 1.940707] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x2040 irq 14 [ 1.940715] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x2048 irq 15 [ 2.047406] natsemi dp8381x driver, version 2.1, Sept 11, 2006 [ 2.047415] originally by Donald Becker [ 2.047416] 2.4.x kernel port by Jeff Garzik, Tjeerd Mulder [ 2.048005] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 10 [ 2.048113] natsemi 0000:00:12.0: PCI INT A -> Link[LNK1] -> GSI 10 (level, low) -> IRQ 10 [ 2.051062] natsemi eth0: NatSemi DP8381[56] at 0xd0008000 (0000:00:12.0), 00:0e:7f:7b:d0:3d, IRQ 10, port TP. [ 2.104535] ata1.00: ATA-6: WDC WD400UE-07HCT0, 09.07D09, max UDMA/100 [ 2.104544] ata1.00: 78140160 sectors, multi 16: LBA [ 2.112470] ata1.00: configured for UDMA/100 [ 2.112887] scsi 0:0:0:0: Direct-Access ATA WDC WD400UE-07HC 09.0 PQ: 0 ANSI: 5 [ 2.113502] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.115012] sd 0:0:0:0: [sda] 78140160 512-byte logical blocks: (40.0 GB/37.2 GiB) [ 2.115380] sd 0:0:0:0: [sda] Write Protect is off [ 2.115391] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.115576] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.116683] sda: [ 2.276460] ata2.00: ATAPI: SD-R2512, 1A04, max MWDMA2 [ 2.276493] ata2.00: WARNING: ATAPI DMA disabled for reliability issues. It can be enabled [ 2.276496] ata2.00: WARNING: via pata_ali.atapi_dma modparam or corresponding sysfs node. [ 2.292376] ata2.00: configured for MWDMA2 [ 2.298796] scsi 1:0:0:0: CD-ROM TOSHIBA DVD-ROM SD-R2512 1A04 PQ: 0 ANSI: 5 [ 2.308939] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 2.308951] Uniform CD-ROM driver Revision: 3.20 [ 2.310245] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.311043] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 2.396628] sda1 sda2 < sda5 > [ 2.427678] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.458642] ohci1394 0000:00:0c.0: enabling device (0010 -> 0012) [ 2.458664] ohci1394 0000:00:0c.0: PCI INT A -> Link[LNK2] -> GSI 10 (level, low) -> IRQ 10 [ 2.471356] usbcore: registered new interface driver hiddev [ 2.487169] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:0b.1/usb3/3-1/3-1:1.0/input/input5 [ 2.489290] generic-usb 0003:046D:C016.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:0b.1-1/input0 [ 2.489424] usbcore: registered new interface driver usbhid [ 2.490358] usbhid: v2.6:USB HID core driver [ 2.512209] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10] MMIO=[d0003800-d0003fff] Max Packet=[2048] IR/IT contexts=[4/8] [ 2.935736] EXT4-fs (sda1): mounted filesystem with ordered data mode [ 3.784375] ieee1394: Host added: ID:BUS[0-00:1023] GUID[000e7f71a07a4ef7] [ 4.332532] usb 1-4: new high speed USB device using ehci_hcd and address 4 [ 4.466968] usb 1-4: configuration #1 chosen from 1 choice [ 12.618647] Adding 1300472k swap on /dev/sda5. Priority:-1 extents:1 across:1300472k [ 12.849744] udev: starting version 151 [ 13.012642] lp: driver loaded but no devices found [ 13.477201] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:00/LNXVIDEO:00/input/input6 [ 13.477420] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 13.631524] Linux agpgart interface v0.103 [ 13.709991] parport_pc 00:09: reported by Plug and Play ACPI [ 13.710048] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] [ 13.722936] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 13.824526] lp0: using parport0 (interrupt-driven). [ 13.904385] agpgart-ati 0000:00:00.0: Ati IGP345M chipset [ 13.904511] reserve_ram_pages_type failed 0x19fd1000-0x19fd2000, track 0x10, req 0x10 [ 13.905073] reserve_ram_pages_type failed 0x154a0000-0x154a1000, track 0x10, req 0x10 [ 13.905602] reserve_ram_pages_type failed 0x15414000-0x15415000, track 0x10, req 0x10 [ 13.906128] reserve_ram_pages_type failed 0x15476000-0x15477000, track 0x10, req 0x10 [ 13.906653] reserve_ram_pages_type failed 0x15499000-0x1549a000, track 0x10, req 0x10 [ 13.907178] reserve_ram_pages_type failed 0x154c3000-0x154c4000, track 0x10, req 0x10 [ 13.907703] reserve_ram_pages_type failed 0x154c2000-0x154c3000, track 0x10, req 0x10 [ 13.987977] reserve_ram_pages_type failed 0x19c81000-0x19c82000, track 0x10, req 0x10 [ 13.988627] reserve_ram_pages_type failed 0x19c80000-0x19c81000, track 0x10, req 0x10 [ 13.989172] reserve_ram_pages_type failed 0x19dfd000-0x19dfe000, track 0x10, req 0x10 [ 13.989705] reserve_ram_pages_type failed 0x19e00000-0x19e01000, track 0x10, req 0x10 [ 13.990234] reserve_ram_pages_type failed 0x19dff000-0x19e00000, track 0x10, req 0x10 [ 13.990775] reserve_ram_pages_type failed 0x19dfc000-0x19dfd000, track 0x10, req 0x10 [ 13.991317] reserve_ram_pages_type failed 0x19dfe000-0x19dff000, track 0x10, req 0x10 [ 13.991852] reserve_ram_pages_type failed 0x1555d000-0x1555e000, track 0x10, req 0x10 [ 14.161359] reserve_ram_pages_type failed 0x1563c000-0x1563d000, track 0x10, req 0x10 [ 14.161882] reserve_ram_pages_type failed 0x1563b000-0x1563c000, track 0x10, req 0x10 [ 14.162703] agpgart-ati 0000:00:00.0: AGP aperture is 64M @ 0xd4000000 [ 14.624674] ppdev: user-space parallel port driver [ 14.626865] cfg80211: Calling CRDA to update world regulatory domain [ 14.745054] Initializing USB Mass Storage driver... [ 14.834565] scsi2 : SCSI emulation for USB Mass Storage devices [ 14.856991] usb-storage: device found at 4 [ 14.856999] usb-storage: waiting for device to settle before scanning [ 14.879217] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x236eb3, caps: 0x904713/0x10008 [ 14.883545] scsi3 : SCSI emulation for USB Mass Storage devices [ 14.901326] usb-storage: device found at 4 [ 14.901333] usb-storage: waiting for device to settle before scanning [ 14.913235] usbcore: registered new interface driver usb-storage [ 14.913248] USB Mass Storage support registered. [ 14.916869] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7 [ 14.997769] cfg80211: World regulatory domain updated: [ 14.997780] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 14.997785] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 14.997789] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 14.997793] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 14.997796] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 14.997800] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 15.131659] type=1505 audit(1291751645.170:2): operation="profile_load" pid=536 name="/sbin/dhclient3" [ 15.143240] type=1505 audit(1291751645.182:3): operation="profile_load" pid=536 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 15.143648] type=1505 audit(1291751645.182:4): operation="profile_load" pid=536 name="/usr/lib/connman/scripts/dhclient-script" [ 15.185770] yenta_cardbus 0000:00:0a.0: CardBus bridge found [0000:0000] [ 15.185800] yenta_cardbus 0000:00:0a.0: Using CSCINT to route CSC interrupts to PCI [ 15.185804] yenta_cardbus 0000:00:0a.0: Routing CardBus interrupts to PCI [ 15.185810] yenta_cardbus 0000:00:0a.0: TI: mfunc 0x01111112, devctl 0x64 [ 15.190050] [drm] Initialized drm 1.1.0 20060810 [ 15.416476] yenta_cardbus 0000:00:0a.0: ISA IRQ mask 0x0038, PCI irq 11 [ 15.416484] yenta_cardbus 0000:00:0a.0: Socket status: 30000006 [ 15.576244] usb 1-4: USB disconnect, address 4 [ 16.078252] [drm] radeon defaulting to kernel modesetting. [ 16.078267] [drm] radeon kernel modesetting enabled. [ 16.078449] radeon 0000:01:05.0: power state changed by ACPI to D0 [ 16.078936] ACPI: PCI Interrupt Link [LNK0] enabled at IRQ 10 [ 16.078949] radeon 0000:01:05.0: PCI INT A -> Link[LNK0] -> GSI 10 (level, low) -> IRQ 10 [ 16.129740] [drm] radeon: Initializing kernel modesetting. [ 16.136264] [drm] register mmio base: 0xD0300000 [ 16.136271] [drm] register mmio size: 65536 [ 16.136752] [drm] GPU reset succeed (RBBM_STATUS=0x00000140) [ 16.136841] agpgart-ati 0000:00:00.0: AGP 2.0 bridge [ 16.136877] agpgart-ati 0000:00:00.0: putting AGP V2 device into 4x mode [ 16.136941] radeon 0000:01:05.0: putting AGP V2 device into 4x mode [ 16.136950] [drm] radeon: VRAM 64M [ 16.136953] [drm] radeon: VRAM from 0x1C000000 to 0x1FFFFFFF [ 16.136955] [drm] radeon: GTT 64M [ 16.136958] [drm] radeon: GTT from 0x20000000 to 0x23FFFFFF [ 16.137043] [drm] radeon: irq initialized. [ 16.137218] [drm] Detected VRAM RAM=64M, BAR=128M [ 16.137226] [drm] RAM width 64bits DDR [ 16.142649] [TTM] Zone kernel: Available graphics memory: 222014 kiB. [ 16.142712] [drm] radeon: 64M of VRAM memory ready [ 16.142718] [drm] radeon: 64M of GTT memory ready. [ 16.228133] [drm] radeon: cp idle (0x00008080) [ 16.228512] [drm] Loading R100 Microcode [ 16.229624] platform radeon_cp.0: firmware: requesting radeon/R100_cp.bin [ 16.304574] [drm] radeon: ring at 0x0000000020000000 [ 16.304606] [drm] ring test succeeded in 1 usecs [ 16.355888] [drm] radeon: ib pool ready. [ 16.356351] [drm] ib test succeeded in 0 usecs [ 16.358834] [drm] Panel ID String: QDI141X1LH03 [ 16.358846] [drm] Panel Size 1024x768 [ 16.367571] [drm] Default TV standard: NTSC [ 16.367582] [drm] 14.318180000 MHz TV ref clk [ 16.367596] [drm] Default TV standard: NTSC [ 16.367598] [drm] 14.318180000 MHz TV ref clk [ 16.368867] [drm] Radeon Display Connectors [ 16.368878] [drm] Connector 0: [ 16.368882] [drm] VGA [ 16.368887] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60 [ 16.368889] [drm] Encoders: [ 16.368892] [drm] CRT1: INTERNAL_DAC1 [ 16.368894] [drm] Connector 1: [ 16.368896] [drm] LVDS [ 16.368900] [drm] DDC: 0x198 0x198 0x19c 0x19c 0x1a0 0x1a0 0x1a4 0x1a4 [ 16.368902] [drm] Encoders: [ 16.368904] [drm] LCD1: INTERNAL_LVDS [ 16.368906] [drm] Connector 2: [ 16.368908] [drm] S-video [ 16.368910] [drm] Encoders: [ 16.368912] [drm] TV1: INTERNAL_DAC2 [ 16.482612] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean. [ 16.485849] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean. [ 16.487150] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. [ 16.508528] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. [ 16.510452] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. [ 16.607810] eth0: DSPCFG accepted after 0 usec. [ 16.616382] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 16.764744] phy0: Selected rate control algorithm 'minstrel' [ 16.766218] Registered led device: rt73usb-phy0::radio [ 16.766297] Registered led device: rt73usb-phy0::assoc [ 16.766365] Registered led device: rt73usb-phy0::quality [ 16.769472] usbcore: registered new interface driver rt73usb [ 16.878436] type=1505 audit(1291751646.918:5): operation="profile_load" pid=654 name="/usr/share/gdm/guest-session/Xsession" [ 16.922257] type=1505 audit(1291751646.962:6): operation="profile_replace" pid=658 name="/sbin/dhclient3" [ 16.923032] type=1505 audit(1291751646.962:7): operation="profile_replace" pid=658 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 16.923465] type=1505 audit(1291751646.962:8): operation="profile_replace" pid=658 name="/usr/lib/connman/scripts/dhclient-script" [ 16.935198] rt73usb 1-2:1.0: firmware: requesting rt73.bin [ 17.085802] type=1505 audit(1291751647.126:9): operation="profile_load" pid=665 name="/usr/bin/evince" [ 17.120969] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 17.146623] type=1505 audit(1291751647.186:10): operation="profile_load" pid=665 name="/usr/bin/evince-previewer" [ 17.175115] type=1505 audit(1291751647.214:11): operation="profile_load" pid=665 name="/usr/bin/evince-thumbnailer" [ 17.337794] [drm] fb mappable at 0xD8040000 [ 17.337801] [drm] vram apper at 0xD8000000 [ 17.337804] [drm] size 3145728 [ 17.337806] [drm] fb depth is 24 [ 17.337809] [drm] pitch is 4096 [ 17.367488] ALI 5451 0000:00:06.0: enabling device (0005 -> 0007) [ 17.369474] ACPI: PCI Interrupt Link [LNK7] enabled at IRQ 5 [ 17.369485] PCI: setting IRQ 5 as level-triggered [ 17.369496] ALI 5451 0000:00:06.0: PCI INT A -> Link[LNK7] -> GSI 5 (level, low) -> IRQ 5 [ 17.392974] fb0: radeondrmfb frame buffer device [ 17.392984] registered panic notifier [ 17.393005] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:05.0 on minor 0 [ 17.419412] vga16fb: initializing [ 17.419431] vga16fb: mapped to 0xc00a0000 [ 17.419445] vga16fb: not registering due to another framebuffer present [ 17.776366] Console: switching to colour frame buffer device 128x48 [ 20.232177] AC'97 1 does not respond - RESET [ 20.248174] AC'97 1 access is not valid [0xffffffff], removing mixer. [ 20.248195] ali mixer 1 creating error. [ 20.356540] usb 1-4: new high speed USB device using ehci_hcd and address 5 [ 20.491744] usb 1-4: configuration #1 chosen from 1 choice [ 20.567889] scsi8 : SCSI emulation for USB Mass Storage devices [ 20.587411] usb-storage: device found at 5 [ 20.587419] usb-storage: waiting for device to settle before scanning [ 20.595056] scsi9 : SCSI emulation for USB Mass Storage devices [ 20.608613] usb-storage: device found at 5 [ 20.608620] usb-storage: waiting for device to settle before scanning [ 20.670875] usbcore: registered new interface driver usbserial [ 20.676760] USB Serial support registered for generic [ 20.679977] usbcore: registered new interface driver usbserial_generic [ 20.679987] usbserial: USB Serial Driver core [ 20.692311] USB Serial support registered for GSM modem (1-port) [ 20.693790] option 1-4:1.0: GSM modem (1-port) converter detected [ 20.705125] usb 1-4: GSM modem (1-port) converter now attached to ttyUSB0 [ 20.705215] option 1-4:1.1: GSM modem (1-port) converter detected [ 20.706236] usb 1-4: GSM modem (1-port) converter now attached to ttyUSB1 [ 20.706316] option 1-4:1.2: GSM modem (1-port) converter detected [ 20.707294] usb 1-4: GSM modem (1-port) converter now attached to ttyUSB2 [ 20.707376] option 1-4:1.3: GSM modem (1-port) converter detected [ 20.722414] usb 1-4: GSM modem (1-port) converter now attached to ttyUSB3 [ 20.722575] usbcore: registered new interface driver option [ 20.722585] option: v0.7.2:USB Driver for GSM modems [ 25.008842] wlan0: deauthenticating from 1c:af:f7:9b:70:6e by local choice (reason=3) [ 25.012771] wlan0: direct probe to AP 1c:af:f7:9b:70:6e (try 1) [ 25.016337] wlan0: direct probe responded [ 25.016352] wlan0: authenticate with AP 1c:af:f7:9b:70:6e (try 1) [ 25.017719] wlan0: authenticated [ 25.017811] wlan0: associate with AP 1c:af:f7:9b:70:6e (try 1) [ 25.019665] wlan0: RX AssocResp from 1c:af:f7:9b:70:6e (capab=0xc31 status=0 aid=1) [ 25.019675] wlan0: associated [ 25.026758] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 25.026948] cfg80211: Calling CRDA for country: GB [ 25.063450] cfg80211: Received country IE: [ 25.063463] cfg80211: Regulatory domain: GB [ 25.063466] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 25.063470] (2402000 KHz - 2494000 KHz @ 40000 KHz), (10000 mBi, 10000 mBm) [ 25.063473] cfg80211: CRDA thinks this should applied: [ 25.063476] cfg80211: Regulatory domain: GB [ 25.063478] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 25.063481] (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 25.063484] (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 25.063488] (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 25.063491] (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) [ 25.063493] cfg80211: We intersect both of these and get: [ 25.063496] cfg80211: Regulatory domain: 98 [ 25.063498] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 25.063501] (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 25.063515] cfg80211: Disabling channel 2484 MHz on phy0 due to Country IE [ 25.063520] cfg80211: Current regulatory domain updated by AP to: GB [ 25.063523] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 25.063526] (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 25.592195] usb-storage: device scan complete [ 25.593285] scsi 8:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2 [ 25.607386] sr1: scsi-1 drive [ 25.612161] sr 8:0:0:0: Attached scsi CD-ROM sr1 [ 25.613549] sr 8:0:0:0: Attached scsi generic sg2 type 5 [ 25.624189] usb-storage: device scan complete [ 25.625138] scsi 9:0:0:0: Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2 [ 25.647417] sd 9:0:0:0: Attached scsi generic sg3 type 0 [ 25.671645] sd 9:0:0:0: [sdb] Attached SCSI removable disk [ 36.020109] wlan0: no IPv6 routers present [ 50.412152] end_request: I/O error, dev fd0, sector 0 [ 50.616143] end_request: I/O error, dev fd0, sector 0 [ 64.994522] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 65.083602] ISOFS: changing to secondary root [ 270.789206] PPP BSD Compression module registered [ 270.834488] PPP Deflate Compression module registered [ 307.712165] wlan0: deauthenticating from 1c:af:f7:9b:70:6e by local choice (reason=3) [ 1448.805388] wlan0: deauthenticating from 1c:af:f7:9b:70:6e by local choice (reason=3) [ 1449.017350] wlan0: direct probe to AP 1c:af:f7:9b:70:6e (try 1) [ 1449.021331] wlan0: direct probe responded [ 1449.021345] wlan0: authenticate with AP 1c:af:f7:9b:70:6e (try 1) [ 1449.022699] wlan0: authenticated [ 1449.022784] wlan0: associate with AP 1c:af:f7:9b:70:6e (try 1) [ 1449.024922] wlan0: RX AssocResp from 1c:af:f7:9b:70:6e (capab=0xc31 status=0 aid=1) [ 1449.024931] wlan0: associated