[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.13.0-24-generic (buildd@panlong) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #46-Ubuntu SMP Thu Apr 10 19:11:08 UTC 2014 (Ubuntu 3.13.0-24.46-generic 3.13.9) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.13.0-24-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000a57affff] usable [ 0.000000] BIOS-e820: [mem 0x00000000a57b0000-0x00000000a61affff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000a61b0000-0x00000000aaabefff] usable [ 0.000000] BIOS-e820: [mem 0x00000000aaabf000-0x00000000aaebefff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000aaebf000-0x00000000aafbefff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000aafbf000-0x00000000aaffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000aafff000-0x00000000aaffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000ab000000-0x00000000af9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000014f5fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Acer Aspire E1-570/EA50_CX , BIOS V2.06 10/08/2013 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x14f600 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-E7FFF write-protect [ 0.000000] E8000-EFFFF write-combining [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FE0000000 write-back [ 0.000000] 2 base 0A0000000 mask FF8000000 write-back [ 0.000000] 3 base 0A8000000 mask FFE000000 write-back [ 0.000000] 4 base 0AA000000 mask FFF000000 write-back [ 0.000000] 5 base 0FF800000 mask FFF800000 write-protect [ 0.000000] 6 base 100000000 mask F80000000 write-back [ 0.000000] 7 base 14F600000 mask FFFE00000 uncachable [ 0.000000] 8 base 14F800000 mask FFF800000 uncachable [ 0.000000] 9 base 150000000 mask FF0000000 uncachable [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: last_pfn = 0xab000 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01fdd000, 0x01fddfff] PGTABLE [ 0.000000] BRK [0x01fde000, 0x01fdefff] PGTABLE [ 0.000000] BRK [0x01fdf000, 0x01fdffff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x14f400000-0x14f5fffff] [ 0.000000] [mem 0x14f400000-0x14f5fffff] page 2M [ 0.000000] BRK [0x01fe0000, 0x01fe0fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x14c000000-0x14f3fffff] [ 0.000000] [mem 0x14c000000-0x14f3fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x100000000-0x14bffffff] [ 0.000000] [mem 0x100000000-0x14bffffff] page 2M [ 0.000000] BRK [0x01fe1000, 0x01fe1fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x1fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x20200000-0x40003fff] [ 0.000000] [mem 0x20200000-0x3fffffff] page 2M [ 0.000000] [mem 0x40000000-0x40003fff] page 4k [ 0.000000] BRK [0x01fe2000, 0x01fe2fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x40005000-0xa57affff] [ 0.000000] [mem 0x40005000-0x401fffff] page 4k [ 0.000000] [mem 0x40200000-0xa55fffff] page 2M [ 0.000000] [mem 0xa5600000-0xa57affff] page 4k [ 0.000000] init_memory_mapping: [mem 0xa61b0000-0xaaabefff] [ 0.000000] [mem 0xa61b0000-0xa61fffff] page 4k [ 0.000000] [mem 0xa6200000-0xaa9fffff] page 2M [ 0.000000] [mem 0xaaa00000-0xaaabefff] page 4k [ 0.000000] init_memory_mapping: [mem 0xaafff000-0xaaffffff] [ 0.000000] [mem 0xaafff000-0xaaffffff] page 4k [ 0.000000] RAMDISK: [mem 0x35a1c000-0x36d05fff] [ 0.000000] ACPI: RSDP 00000000000fe020 000024 (v02 ACRSYS) [ 0.000000] ACPI: XSDT 00000000aaffe210 000094 (v01 ACRSYS ACRPRDCT 00000001 01000013) [ 0.000000] ACPI: FACP 00000000aaffb000 00010C (v05 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: DSDT 00000000aafec000 00BB8D (v01 ACRSYS ACRPRDCT 00000000 1025 00040000) [ 0.000000] ACPI: FACS 00000000aafba000 000040 [ 0.000000] ACPI: UEFI 00000000aaffd000 000236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: ASF! 00000000aaffc000 0000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: HPET 00000000aaffa000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: APIC 00000000aaff9000 00008C (v03 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: MCFG 00000000aaff8000 00003C (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: SSDT 00000000aafeb000 0006FE (v01 ACRSYS ACRPRDCT 00001000 1025 00040000) [ 0.000000] ACPI: BOOT 00000000aafe9000 000028 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: ASPT 00000000aafe4000 000034 (v07 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: DBGP 00000000aafe3000 000034 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: FPDT 00000000aafe1000 000044 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: MSDM 00000000aafe0000 000055 (v03 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.000000] ACPI: SSDT 00000000aafdf000 0008E4 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000) [ 0.000000] ACPI: SSDT 00000000aafde000 000A92 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000014f5fffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x14f5fffff] [ 0.000000] NODE_DATA [mem 0x14f5f5000-0x14f5f9fff] [ 0.000000] [ffffea0000000000-ffffea00053fffff] PMD -> [ffff88014ac00000-ffff88014ebfffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x14f5fffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009cfff] [ 0.000000] node 0: [mem 0x00100000-0x1fffffff] [ 0.000000] node 0: [mem 0x20200000-0x40003fff] [ 0.000000] node 0: [mem 0x40005000-0xa57affff] [ 0.000000] node 0: [mem 0xa61b0000-0xaaabefff] [ 0.000000] node 0: [mem 0xaafff000-0xaaffffff] [ 0.000000] node 0: [mem 0x100000000-0x14f5fffff] [ 0.000000] On node 0 totalpages: 1021019 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 10811 pages used for memmap [ 0.000000] DMA32 zone: 691903 pages, LIFO batch:31 [ 0.000000] Normal zone: 5080 pages used for memmap [ 0.000000] Normal zone: 325120 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff] [ 0.000000] PM: Registered nosave memory: [mem 0xa57b0000-0xa61affff] [ 0.000000] PM: Registered nosave memory: [mem 0xaaabf000-0xaaebefff] [ 0.000000] PM: Registered nosave memory: [mem 0xaaebf000-0xaafbefff] [ 0.000000] PM: Registered nosave memory: [mem 0xaafbf000-0xaaffefff] [ 0.000000] PM: Registered nosave memory: [mem 0xab000000-0xaf9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xafa00000-0xefffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xfeafffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff] [ 0.000000] e820: [mem 0xafa00000-0xefffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88014f200000 s86336 r8192 d24256 u262144 [ 0.000000] pcpu-alloc: s86336 r8192 d24256 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1005043 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.13.0-24-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 3915544K/4084076K available (7338K kernel code, 1138K rwdata, 3388K rodata, 1332K init, 1440K bss, 168532K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8. [ 0.000000] Offload RCU callbacks from all CPUs [ 0.000000] Offload RCU callbacks from CPUs: 0-7. [ 0.000000] NR_IRQS:16640 nr_irqs:744 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 16777216 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.004000] tsc: Detected 1795.765 MHz processor [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3591.53 BogoMIPS (lpj=7183060) [ 0.000006] pid_max: default: 32768 minimum: 301 [ 0.000035] Security Framework initialized [ 0.000056] AppArmor: AppArmor initialized [ 0.000058] Yama: becoming mindful. [ 0.000469] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.001927] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.002576] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.002583] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.002833] Initializing cgroup subsys memory [ 0.002840] Initializing cgroup subsys devices [ 0.002842] Initializing cgroup subsys freezer [ 0.002844] Initializing cgroup subsys blkio [ 0.002846] Initializing cgroup subsys perf_event [ 0.002849] Initializing cgroup subsys hugetlb [ 0.002880] CPU: Physical Processor ID: 0 [ 0.002881] CPU: Processor Core ID: 0 [ 0.002887] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.002887] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.002892] mce: CPU supports 7 MCE banks [ 0.002906] CPU0: Thermal monitoring enabled (TM1) [ 0.002917] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0 [ 0.002917] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32 [ 0.002917] tlb_flushall_shift: 2 [ 0.003078] Freeing SMP alternatives memory: 32K (ffffffff81e6b000 - ffffffff81e73000) [ 0.004667] ACPI: Core revision 20131115 [ 0.011520] ACPI: All ACPI Tables successfully acquired [ 0.030169] ftrace: allocating 28408 entries in 111 pages [ 0.048822] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.088493] smpboot: CPU0: Intel(R) Core(TM) i3-3217U CPU @ 1.80GHz (fam: 06, model: 3a, stepping: 09) [ 0.088502] TSC deadline timer enabled [ 0.091620] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver. [ 0.091629] ... version: 3 [ 0.091631] ... bit width: 48 [ 0.091632] ... generic registers: 4 [ 0.091633] ... value mask: 0000ffffffffffff [ 0.091635] ... max period: 0000ffffffffffff [ 0.091636] ... fixed-purpose events: 3 [ 0.091637] ... event mask: 000000070000000f [ 0.093828] x86: Booting SMP configuration: [ 0.107117] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.093830] .... node #0, CPUs: #1 #2 #3 [ 0.133635] x86: Booted up 1 node, 4 CPUs [ 0.133639] smpboot: Total of 4 processors activated (14366.12 BogoMIPS) [ 0.137994] devtmpfs: initialized [ 0.141229] EVM: security.selinux [ 0.141231] EVM: security.SMACK64 [ 0.141232] EVM: security.ima [ 0.141233] EVM: security.capability [ 0.141294] PM: Registering ACPI NVS region [mem 0xaaebf000-0xaafbefff] (1048576 bytes) [ 0.142335] pinctrl core: initialized pinctrl subsystem [ 0.142400] regulator-dummy: no parameters [ 0.142435] RTC time: 16:56:57, date: 06/07/16 [ 0.142474] NET: Registered protocol family 16 [ 0.142591] cpuidle: using governor ladder [ 0.142593] cpuidle: using governor menu [ 0.142637] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.142639] ACPI: bus type PCI registered [ 0.142641] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.142712] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) [ 0.142715] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 [ 0.151592] PCI: Using configuration type 1 for base access [ 0.152671] bio: create slab at 0 [ 0.152857] ACPI: Added _OSI(Module Device) [ 0.152860] ACPI: Added _OSI(Processor Device) [ 0.152862] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.152863] ACPI: Added _OSI(Processor Aggregator Device) [ 0.157227] ACPI: Executed 1 blocks of module-level executable AML code [ 0.161860] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.162306] ACPI: SSDT 00000000aae17018 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20120913) [ 0.162862] ACPI: Dynamic OEM Table Load: [ 0.162865] ACPI: SSDT (null) 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20120913) [ 0.166053] ACPI: SSDT 00000000aae18a98 000303 (v01 PmRef ApIst 00003000 INTL 20120913) [ 0.166645] ACPI: Dynamic OEM Table Load: [ 0.166647] ACPI: SSDT (null) 000303 (v01 PmRef ApIst 00003000 INTL 20120913) [ 0.169870] ACPI: SSDT 00000000aae16d98 000119 (v01 PmRef ApCst 00003000 INTL 20120913) [ 0.170420] ACPI: Dynamic OEM Table Load: [ 0.170422] ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20120913) [ 0.174604] ACPI: Interpreter enabled [ 0.174612] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580) [ 0.174618] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580) [ 0.174637] ACPI: (supports S0 S3 S4 S5) [ 0.174638] ACPI: Using IOAPIC for interrupt routing [ 0.174671] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.174865] ACPI: No dock devices found. [ 0.419207] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.419214] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.419339] \_SB_.PCI0:_OSC invalid UUID [ 0.419341] _OSC request data:1 1f 0 [ 0.419346] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM [ 0.420194] PCI host bridge to bus 0000:00 [ 0.420198] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.420200] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.420203] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.420205] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.420207] pci_bus 0000:00: root bus resource [mem 0xafa00000-0xfeafffff] [ 0.420218] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000 [ 0.420328] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000 [ 0.420343] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc03fffff 64bit] [ 0.420352] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref] [ 0.420358] pci 0000:00:02.0: reg 0x20: [io 0x2000-0x203f] [ 0.420503] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330 [ 0.420534] pci 0000:00:14.0: reg 0x10: [mem 0xc0600000-0xc060ffff 64bit] [ 0.420630] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.420689] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.420731] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000 [ 0.420764] pci 0000:00:16.0: reg 0x10: [mem 0xc0614000-0xc061400f 64bit] [ 0.420866] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.420978] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320 [ 0.421006] pci 0000:00:1a.0: reg 0x10: [mem 0xc0619000-0xc06193ff] [ 0.421123] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.421198] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 0.421244] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300 [ 0.421266] pci 0000:00:1b.0: reg 0x10: [mem 0xc0610000-0xc0613fff 64bit] [ 0.421357] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.421420] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.421457] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400 [ 0.421563] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.421625] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.421660] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400 [ 0.421763] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.421831] pci 0000:00:1c.1: System wakeup disabled by ACPI [ 0.421893] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320 [ 0.421920] pci 0000:00:1d.0: reg 0x10: [mem 0xc0618000-0xc06183ff] [ 0.422038] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.422115] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.422153] pci 0000:00:1f.0: [8086:1e57] type 00 class 0x060100 [ 0.422365] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601 [ 0.422392] pci 0000:00:1f.2: reg 0x10: [io 0x2088-0x208f] [ 0.422404] pci 0000:00:1f.2: reg 0x14: [io 0x2094-0x2097] [ 0.422416] pci 0000:00:1f.2: reg 0x18: [io 0x2080-0x2087] [ 0.422428] pci 0000:00:1f.2: reg 0x1c: [io 0x2090-0x2093] [ 0.422441] pci 0000:00:1f.2: reg 0x20: [io 0x2060-0x207f] [ 0.422452] pci 0000:00:1f.2: reg 0x24: [mem 0xc0617000-0xc06177ff] [ 0.422513] pci 0000:00:1f.2: PME# supported from D3hot [ 0.422599] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500 [ 0.422624] pci 0000:00:1f.3: reg 0x10: [mem 0xc0615000-0xc06150ff 64bit] [ 0.422658] pci 0000:00:1f.3: reg 0x20: [io 0x2040-0x205f] [ 0.422910] pci 0000:02:00.0: [14e4:16b3] type 00 class 0x020000 [ 0.422947] pci 0000:02:00.0: reg 0x10: [mem 0xc0410000-0xc041ffff 64bit pref] [ 0.422978] pci 0000:02:00.0: reg 0x18: [mem 0xc0420000-0xc042ffff 64bit pref] [ 0.423035] pci 0000:02:00.0: reg 0x30: [mem 0xfffff800-0xffffffff pref] [ 0.423168] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.423213] pci 0000:02:00.0: System wakeup disabled by ACPI [ 0.423296] pci 0000:02:00.1: [14e4:16bc] type 00 class 0x080501 [ 0.423334] pci 0000:02:00.1: reg 0x10: [mem 0xc0400000-0xc040ffff 64bit pref] [ 0.423522] pci 0000:02:00.1: PME# supported from D0 D3hot D3cold [ 0.433939] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.433952] pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc04fffff 64bit pref] [ 0.434062] pci 0000:03:00.0: [168c:0036] type 00 class 0x028000 [ 0.434095] pci 0000:03:00.0: reg 0x10: [mem 0xc0500000-0xc057ffff 64bit] [ 0.434171] pci 0000:03:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref] [ 0.434247] pci 0000:03:00.0: supports D1 D2 [ 0.434249] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.434287] pci 0000:03:00.0: System wakeup disabled by ACPI [ 0.445877] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.445885] pci 0000:00:1c.1: bridge window [mem 0xc0500000-0xc05fffff] [ 0.522330] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *7 [ 0.522398] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.522463] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.522528] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.522591] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.522656] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *7 [ 0.522721] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.522784] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.523112] ACPI: Enabled 6 GPEs in block 00 to 3F [ 0.523120] ACPI: \_SB_.PCI0: notify handler is installed [ 0.523195] Found 1 acpi root devices [ 0.523236] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 0.523344] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.523349] vgaarb: loaded [ 0.523350] vgaarb: bridge control possible 0000:00:02.0 [ 0.523536] SCSI subsystem initialized [ 0.523596] libata version 3.00 loaded. [ 0.523617] ACPI: bus type USB registered [ 0.523634] usbcore: registered new interface driver usbfs [ 0.523644] usbcore: registered new interface driver hub [ 0.523673] usbcore: registered new device driver usb [ 0.523797] PCI: Using ACPI for IRQ routing [ 0.525646] PCI: pci_cache_line_size set to 64 bytes [ 0.525770] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff] [ 0.525773] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff] [ 0.525775] e820: reserve RAM buffer [mem 0xa57b0000-0xa7ffffff] [ 0.525776] e820: reserve RAM buffer [mem 0xaaabf000-0xabffffff] [ 0.525778] e820: reserve RAM buffer [mem 0xab000000-0xabffffff] [ 0.525780] e820: reserve RAM buffer [mem 0x14f600000-0x14fffffff] [ 0.525878] NetLabel: Initializing [ 0.525880] NetLabel: domain hash size = 128 [ 0.525882] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.525896] NetLabel: unlabeled traffic allowed by default [ 0.525961] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.525968] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.528004] Switched to clocksource hpet [ 0.533789] AppArmor: AppArmor Filesystem Enabled [ 0.533816] pnp: PnP ACPI init [ 0.533830] ACPI: bus type PNP registered [ 0.533929] pnp 00:00: Plug and Play ACPI device, IDs MSF0001 PNP0303 (active) [ 0.533997] pnp 00:01: Plug and Play ACPI device, IDs ETD0500 PNP0f13 (active) [ 0.534069] pnp 00:02: [dma 4] [ 0.534088] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.534110] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active) [ 0.534207] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.534238] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.534290] system 00:06: [io 0x0680-0x069f] has been reserved [ 0.534293] system 00:06: [io 0xfd60-0xfd63] has been reserved [ 0.534296] system 00:06: [io 0x1000-0x100f] has been reserved [ 0.534298] system 00:06: [io 0xffff] has been reserved [ 0.534300] system 00:06: [io 0xffff] has been reserved [ 0.534303] system 00:06: [io 0x0400-0x0453] could not be reserved [ 0.534306] system 00:06: [io 0x0458-0x047f] has been reserved [ 0.534308] system 00:06: [io 0x0500-0x057f] has been reserved [ 0.534310] system 00:06: [io 0x164e-0x164f] has been reserved [ 0.534314] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.534343] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.534394] system 00:08: [io 0x0454-0x0457] has been reserved [ 0.534398] system 00:08: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.604178] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.604181] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.604184] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.604186] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.604189] system 00:09: [mem 0xf0000000-0xf3ffffff] has been reserved [ 0.604191] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.604194] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.604196] system 00:09: [mem 0xff000000-0xff000fff] has been reserved [ 0.604199] system 00:09: [mem 0xff010000-0xffffffff] could not be reserved [ 0.604202] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.604204] system 00:09: [mem 0xafa00000-0xafa00fff] has been reserved [ 0.604208] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.604486] system 00:0a: [mem 0x20000000-0x201fffff] has been reserved [ 0.604489] system 00:0a: [mem 0x40004000-0x40004fff] has been reserved [ 0.604492] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.604512] pnp: PnP ACPI: found 11 devices [ 0.604514] ACPI: bus type PNP unregistered [ 0.611072] pci 0000:02:00.0: no compatible bridge window for [mem 0xfffff800-0xffffffff pref] [ 0.611076] pci 0000:03:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref] [ 0.611108] pci 0000:00:1c.0: BAR 14: assigned [mem 0xafb00000-0xafbfffff] [ 0.611112] pci 0000:00:1c.1: BAR 15: assigned [mem 0xafc00000-0xafcfffff pref] [ 0.611116] pci 0000:02:00.0: BAR 6: assigned [mem 0xc0430000-0xc04307ff pref] [ 0.611118] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.611125] pci 0000:00:1c.0: bridge window [mem 0xafb00000-0xafbfffff] [ 0.611131] pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc04fffff 64bit pref] [ 0.611141] pci 0000:03:00.0: BAR 6: assigned [mem 0xafc00000-0xafc0ffff pref] [ 0.611143] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.611150] pci 0000:00:1c.1: bridge window [mem 0xc0500000-0xc05fffff] [ 0.611156] pci 0000:00:1c.1: bridge window [mem 0xafc00000-0xafcfffff pref] [ 0.611165] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.611167] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.611169] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.611172] pci_bus 0000:00: resource 7 [mem 0xafa00000-0xfeafffff] [ 0.611174] pci_bus 0000:02: resource 1 [mem 0xafb00000-0xafbfffff] [ 0.611177] pci_bus 0000:02: resource 2 [mem 0xc0400000-0xc04fffff 64bit pref] [ 0.611179] pci_bus 0000:03: resource 1 [mem 0xc0500000-0xc05fffff] [ 0.611181] pci_bus 0000:03: resource 2 [mem 0xafc00000-0xafcfffff pref] [ 0.611217] NET: Registered protocol family 2 [ 0.611409] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.611514] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.611616] TCP: Hash tables configured (established 32768 bind 32768) [ 0.611636] TCP: reno registered [ 0.611646] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.611666] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.611736] NET: Registered protocol family 1 [ 0.611749] pci 0000:00:02.0: Boot video device [ 0.644149] PCI: CLS 64 bytes, default 64 [ 0.644216] Trying to unpack rootfs image as initramfs... [ 1.061100] Freeing initrd memory: 19368K (ffff880035a1c000 - ffff880036d06000) [ 1.061107] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.061110] software IO TLB [mem 0xa6abf000-0xaaabf000] (64MB) mapped at [ffff8800a6abf000-ffff8800aaabefff] [ 1.061181] Simple Boot Flag at 0x44 set to 0x1 [ 1.061392] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x19 [ 1.061400] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x19 [ 1.061412] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x19 [ 1.061422] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x19 [ 1.061487] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 1.061489] Scanning for low memory corruption every 60 seconds [ 1.061816] Initialise system trusted keyring [ 1.061866] audit: initializing netlink socket (disabled) [ 1.061880] type=2000 audit(1465318618.036:1): initialized [ 1.098440] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.099836] VFS: Disk quotas dquot_6.5.2 [ 1.099883] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.100349] fuse init (API version 7.22) [ 1.100431] msgmni has been set to 7685 [ 1.100488] Key type big_key registered [ 1.100992] Key type asymmetric registered [ 1.100995] Asymmetric key parser 'x509' registered [ 1.101028] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 1.101072] io scheduler noop registered [ 1.101075] io scheduler deadline registered (default) [ 1.101102] io scheduler cfq registered [ 1.101514] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.101532] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.101572] vesafb: mode is 1366x768x32, linelength=5504, pages=0 [ 1.101574] vesafb: scrolling: redraw [ 1.101576] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.102177] vesafb: framebuffer at 0xb0000000, mapped to 0xffffc90004780000, using 4160k, total 4160k [ 1.197869] Console: switching to colour frame buffer device 170x48 [ 1.293230] fb0: VESA VGA frame buffer device [ 1.293249] intel_idle: MWAIT substates: 0x21120 [ 1.293251] intel_idle: v0.4 model 0x3A [ 1.293252] intel_idle: lapic_timer_reliable_states 0xffffffff [ 1.293367] ipmi message handler version 39.2 [ 1.293467] ACPI: AC Adapter [ACAD] (on-line) [ 1.293559] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0C:00/input/input0 [ 1.293564] ACPI: Power Button [PWRB] [ 1.293600] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0D:00/input/input1 [ 1.293622] ACPI: Lid Switch [LID0] [ 1.293656] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0E:00/input/input2 [ 1.293659] ACPI: Sleep Button [SLPB] [ 1.293702] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 1.293704] ACPI: Power Button [PWRF] [ 1.293944] GHES: HEST is not enabled! [ 1.294064] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.643678] [Firmware Bug]: battery: (dis)charge rate invalid. [ 1.643703] ACPI: Battery Slot [BAT1] (battery present) [ 1.643847] Linux agpgart interface v0.103 [ 1.645959] brd: module loaded [ 1.646671] loop: module loaded [ 1.647035] libphy: Fixed MDIO Bus: probed [ 1.647125] tun: Universal TUN/TAP device driver, 1.6 [ 1.647127] tun: (C) 1999-2004 Max Krasnyansky [ 1.647180] PPP generic driver version 2.4.2 [ 1.647225] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.647229] ehci-pci: EHCI PCI platform driver [ 1.647382] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 1.647389] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.647407] ehci-pci 0000:00:1a.0: debug port 2 [ 1.651315] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 1.651337] ehci-pci 0000:00:1a.0: irq 16, io mem 0xc0619000 [ 1.659662] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.659716] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.659718] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.659720] usb usb1: Product: EHCI Host Controller [ 1.659723] usb usb1: Manufacturer: Linux 3.13.0-24-generic ehci_hcd [ 1.659725] usb usb1: SerialNumber: 0000:00:1a.0 [ 1.659851] hub 1-0:1.0: USB hub found [ 1.659860] hub 1-0:1.0: 2 ports detected [ 1.660083] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 1.660089] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.660105] ehci-pci 0000:00:1d.0: debug port 2 [ 1.664004] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 1.664020] ehci-pci 0000:00:1d.0: irq 23, io mem 0xc0618000 [ 1.675656] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.675704] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.675706] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.675708] usb usb2: Product: EHCI Host Controller [ 1.675710] usb usb2: Manufacturer: Linux 3.13.0-24-generic ehci_hcd [ 1.675712] usb usb2: SerialNumber: 0000:00:1d.0 [ 1.675911] hub 2-0:1.0: USB hub found [ 1.675921] hub 2-0:1.0: 2 ports detected [ 1.676029] ehci-platform: EHCI generic platform driver [ 1.676039] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.676040] ohci-pci: OHCI PCI platform driver [ 1.676051] ohci-platform: OHCI generic platform driver [ 1.676057] uhci_hcd: USB Universal Host Controller Interface driver [ 1.676211] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.676216] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 1.676323] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 1.676352] xhci_hcd 0000:00:14.0: irq 40 for MSI/MSI-X [ 1.676433] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.676435] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.676438] usb usb3: Product: xHCI Host Controller [ 1.676440] usb usb3: Manufacturer: Linux 3.13.0-24-generic xhci_hcd [ 1.676442] usb usb3: SerialNumber: 0000:00:14.0 [ 1.676635] hub 3-0:1.0: USB hub found [ 1.676649] hub 3-0:1.0: 4 ports detected [ 1.677049] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.677054] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 1.677105] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.677107] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.677109] usb usb4: Product: xHCI Host Controller [ 1.677111] usb usb4: Manufacturer: Linux 3.13.0-24-generic xhci_hcd [ 1.677113] usb usb4: SerialNumber: 0000:00:14.0 [ 1.677315] hub 4-0:1.0: USB hub found [ 1.677329] hub 4-0:1.0: 4 ports detected [ 1.683863] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 [ 1.703636] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.703644] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.703942] mousedev: PS/2 mouse device common for all mice [ 1.704405] rtc_cmos 00:07: RTC can wake from S4 [ 1.704585] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 1.704618] rtc_cmos 00:07: alarms up to one month, 242 bytes nvram, hpet irqs [ 1.704691] device-mapper: uevent: version 1.0.3 [ 1.704792] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com [ 1.704803] ledtrig-cpu: registered to indicate activity on CPUs [ 1.704919] TCP: cubic registered [ 1.705017] NET: Registered protocol family 10 [ 1.705203] NET: Registered protocol family 17 [ 1.705213] Key type dns_resolver registered [ 1.705573] Loading compiled-in X.509 certificates [ 1.706747] Loaded X.509 cert 'Magrathea: Glacier signing key: 00a5a65759de474bc5c43120880c1b94a539f431' [ 1.706766] registered taskstats version 1 [ 1.709717] Key type trusted registered [ 1.712393] Key type encrypted registered [ 1.714961] AppArmor: AppArmor sha1 policy hashing enabled [ 1.714965] IMA: No TPM chip found, activating TPM-bypass! [ 1.715353] regulator-dummy: disabling [ 1.715419] Magic number: 4:114:944 [ 1.715447] tty tty1: hash matches [ 1.715539] rtc_cmos 00:07: setting system clock to 2016-06-07 16:56:59 UTC (1465318619) [ 1.716446] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.716449] EDD information not available. [ 1.716499] PM: Hibernation image not present or could not be loaded. [ 1.717534] Freeing unused kernel memory: 1332K (ffffffff81d1e000 - ffffffff81e6b000) [ 1.717536] Write protecting the kernel read-only data: 12288k [ 1.720226] Freeing unused kernel memory: 844K (ffff88000172d000 - ffff880001800000) [ 1.721552] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 1.722470] Freeing unused kernel memory: 708K (ffff880001b4f000 - ffff880001c00000) [ 1.739814] systemd-udevd[125]: starting version 204 [ 1.772884] pps_core: LinuxPPS API ver. 1 registered [ 1.772888] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.773283] sdhci: Secure Digital Host Controller Interface driver [ 1.773286] sdhci: Copyright(c) Pierre Ossman [ 1.775327] PTP clock support registered [ 1.775978] sdhci-pci 0000:02:00.1: SDHCI controller found [14e4:16bc] (rev 1) [ 1.776194] sdhci-pci 0000:02:00.1: dummy supplies not allowed [ 1.776197] mmc0: no vqmmc regulator found [ 1.776200] sdhci-pci 0000:02:00.1: dummy supplies not allowed [ 1.776202] mmc0: no vmmc regulator found [ 1.776340] mmc0: SDHCI controller on PCI [0000:02:00.1] using ADMA [ 1.780191] ahci 0000:00:1f.2: version 3.0 [ 1.780395] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X [ 1.780437] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 1.781052] tg3.c:v3.134 (Sep 16, 2013) [ 1.795650] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode [ 1.795659] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems apst [ 1.804814] scsi0 : ahci [ 1.804946] scsi1 : ahci [ 1.805055] scsi2 : ahci [ 1.805167] scsi3 : ahci [ 1.805273] scsi4 : ahci [ 1.805959] scsi5 : ahci [ 1.806019] ata1: SATA max UDMA/133 abar m2048@0xc0617000 port 0xc0617100 irq 41 [ 1.806022] ata2: DUMMY [ 1.806024] ata3: SATA max UDMA/133 abar m2048@0xc0617000 port 0xc0617200 irq 41 [ 1.806026] ata4: DUMMY [ 1.806027] ata5: DUMMY [ 1.806029] ata6: DUMMY [ 1.815803] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM57786) rev 57766001] (PCI Express) MAC address 20:1a:06:d0:21:c3 [ 1.815808] tg3 0000:02:00.0 eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [ 1.815811] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 1.815813] tg3 0000:02:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit] [ 1.971692] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 2.059608] tsc: Refined TSC clocksource calibration: 1795.920 MHz [ 2.104062] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 2.104067] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.104490] hub 1-1:1.0: USB hub found [ 2.104642] hub 1-1:1.0: 6 ports detected [ 2.123594] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.124333] ata1.00: ATA-8: ST500LT012-9WS142, 0001SDM1, max UDMA/133 [ 2.124338] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 2.125171] ata1.00: configured for UDMA/133 [ 2.125442] scsi 0:0:0:0: Direct-Access ATA ST500LT012-9WS14 0001 PQ: 0 ANSI: 5 [ 2.125750] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.125834] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 2.125844] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 2.126127] sd 0:0:0:0: [sda] Write Protect is off [ 2.126132] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.126261] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.153616] sda: sda1 sda2 < sda5 > [ 2.154151] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.271597] usb 3-3: new low-speed USB device number 2 using xhci_hcd [ 2.293271] usb 3-3: New USB device found, idVendor=046d, idProduct=c040 [ 2.293276] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.293279] usb 3-3: Product: USB-PS/2 Optical Mouse [ 2.293281] usb 3-3: Manufacturer: Logitech [ 2.293475] usb 3-3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 2.297614] hidraw: raw HID events driver (C) Jiri Kosina [ 2.302853] usbcore: registered new interface driver usbhid [ 2.302857] usbhid: USB HID core driver [ 2.304690] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/input/input7 [ 2.304858] hid-generic 0003:046D:C040.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:14.0-3/input0 [ 2.403558] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 2.443494] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.445736] ata3.00: ATAPI: HL-DT-ST DVDRAM GUA0N, 1.00, max UDMA/133 [ 2.449870] ata3.00: configured for UDMA/133 [ 2.455698] scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GUA0N 1.00 PQ: 0 ANSI: 5 [ 2.463518] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.463523] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.463802] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 2.464048] sr 2:0:0:0: Attached scsi generic sg1 type 5 [ 2.535924] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 2.535929] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.536344] hub 2-1:1.0: USB hub found [ 2.536499] hub 2-1:1.0: 8 ports detected [ 2.607670] usb 1-1.1: new full-speed USB device number 3 using ehci-pci [ 2.619207] random: lvm urandom read with 47 bits of entropy available [ 2.678419] bio: create slab at 1 [ 2.700905] usb 1-1.1: New USB device found, idVendor=0489, idProduct=e078 [ 2.700910] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.771617] usb 1-1.3: new high-speed USB device number 4 using ehci-pci [ 2.899220] usb 1-1.3: New USB device found, idVendor=04f2, idProduct=b3f6 [ 2.899225] usb 1-1.3: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 2.899229] usb 1-1.3: Product: HD WebCam [ 2.899231] usb 1-1.3: Manufacturer: Chicony Electronics Co.,Ltd. [ 2.899233] usb 1-1.3: SerialNumber: 0001 [ 3.059520] Switched to clocksource tsc [ 3.753410] random: nonblocking pool is initialized [ 3.974763] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 5.632396] init: plymouth-upstart-bridge main process (213) terminated with status 1 [ 5.632424] init: plymouth-upstart-bridge main process ended, respawning [ 7.086392] Adding 4083708k swap on /dev/mapper/ubuntu--vg-swap_1. Priority:-1 extents:1 across:4083708k FS [ 7.249502] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 7.460831] systemd-udevd[330]: starting version 204 [ 7.745050] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro [ 8.150909] lp: driver loaded but no devices found [ 8.158991] ppdev: user-space parallel port driver [ 8.399596] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem [ 8.480045] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null) [ 8.806572] wmi: Mapper loaded [ 8.837332] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251) [ 8.837343] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 8.837349] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251) [ 8.837355] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 8.837366] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251) [ 8.837372] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 8.837374] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 8.872895] mei_me 0000:00:16.0: irq 42 for MSI/MSI-X [ 9.266917] [drm] Initialized drm 1.1.0 20060810 [ 9.357313] Bluetooth: Core ver 2.17 [ 9.357764] NET: Registered protocol family 31 [ 9.357765] Bluetooth: HCI device and connection manager initialized [ 9.357772] Bluetooth: HCI socket layer initialized [ 9.357774] Bluetooth: L2CAP socket layer initialized [ 9.357780] Bluetooth: SCO socket layer initialized [ 9.477305] usbcore: registered new interface driver btusb [ 9.551488] cfg80211: Calling CRDA to update world regulatory domain [ 9.572691] [drm] Memory usable by graphics device = 2048M [ 9.572696] checking generic (b0000000 410000) vs hw (b0000000 10000000) [ 9.572698] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver [ 9.572734] Console: switching to colour dummy device 80x25 [ 9.673181] i915 0000:00:02.0: irq 43 for MSI/MSI-X [ 9.673194] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 9.673196] [drm] Driver supports precise vblank timestamp query. [ 9.673323] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 9.755528] fbcon: inteldrmfb (fb0) is primary device [ 9.784881] Linux video capture interface: v2.00 [ 9.847931] acer_wmi: Acer Laptop ACPI-WMI Extras [ 9.847945] acer_wmi: Function bitmap for Communication Button: 0x801 [ 9.848108] acer_wmi: Brightness must be controlled by acpi video driver [ 9.870334] acer_wmi: Enabling Launch Manager failed: 0xe2 - 0x0 [ 9.870396] input: Acer WMI hotkeys as /devices/virtual/input/input9 [ 9.870732] input: Acer BMA150 accelerometer as /devices/virtual/input/input10 [ 9.923660] ath: phy0: Set BT/WLAN RX diversity capability [ 9.931141] ath: phy0: Enable LNA combining [ 9.931344] uvcvideo: Found UVC 1.00 device HD WebCam (04f2:b3f6) [ 9.932332] ath: phy0: ASPM enabled: 0x42 [ 9.932333] ath: EEPROM regdomain: 0x6c [ 9.932334] ath: EEPROM indicates we should expect a direct regpair map [ 9.932335] ath: Country alpha2 being used: 00 [ 9.932336] ath: Regpair used: 0x6c [ 9.933113] input: HD WebCam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input11 [ 9.933225] usbcore: registered new interface driver uvcvideo [ 9.933226] USB Video Class driver (1.1.1) [ 9.954452] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 9.954779] ieee80211 phy0: Atheros AR9565 Rev:1 mem=0xffffc90004900000, irq=17 [ 10.092750] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x454f00) [ 10.118066] psmouse serio1: elantech: Synaptics capabilities query result 0x79, 0x16, 0x0c. [ 10.188285] cfg80211: World regulatory domain updated: [ 10.188286] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 10.188288] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 10.188289] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 10.188289] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 10.188290] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 10.188291] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 10.239306] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input8 [ 10.837125] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off [ 10.903253] type=1400 audit(1465318628.687:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=505 comm="apparmor_parser" [ 10.903259] type=1400 audit(1465318628.687:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=505 comm="apparmor_parser" [ 10.903263] type=1400 audit(1465318628.687:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=505 comm="apparmor_parser" [ 10.903551] type=1400 audit(1465318628.687:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=519 comm="apparmor_parser" [ 10.903560] type=1400 audit(1465318628.687:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=519 comm="apparmor_parser" [ 10.903565] type=1400 audit(1465318628.687:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=519 comm="apparmor_parser" [ 10.903575] type=1400 audit(1465318628.687:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=506 comm="apparmor_parser" [ 10.903582] type=1400 audit(1465318628.687:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=506 comm="apparmor_parser" [ 10.903587] type=1400 audit(1465318628.687:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=506 comm="apparmor_parser" [ 10.903809] type=1400 audit(1465318628.687:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=505 comm="apparmor_parser" [ 11.576609] Console: switching to colour frame buffer device 170x48 [ 11.582036] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 11.582037] i915 0000:00:02.0: registered panic notifier [ 11.583658] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 11.892595] acpi device:3d: registered as cooling_device5 [ 11.893697] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input12 [ 11.894345] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 11.894602] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X [ 11.936997] SKU: Nid=0x1d sku_cfg=0x40589b2d [ 11.937002] SKU: port_connectivity=0x1 [ 11.937004] SKU: enable_pcbeep=0x1 [ 11.937005] SKU: check_sum=0x00000008 [ 11.937007] SKU: customization=0x0000009b [ 11.937008] SKU: external_amp=0x5 [ 11.937009] SKU: platform_type=0x1 [ 11.937010] SKU: swap=0x0 [ 11.937011] SKU: override=0x1 [ 11.937202] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 11.937204] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 11.937206] hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 11.937207] mono: mono_out=0x0 [ 11.937208] inputs: [ 11.937210] Mic=0x1b [ 11.937212] realtek: No valid SSID, checking pincfg 0x40589b2d for NID 0x1d [ 11.937213] realtek: Enabling init ASM_ID=0x9b2d CODEC_ID=10ec0282 [ 11.942107] init: failsafe main process (546) killed by TERM signal [ 11.961068] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 11.961181] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 12.477726] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 12.477731] Bluetooth: BNEP filters: protocol multicast [ 12.477741] Bluetooth: BNEP socket layer initialized [ 12.503177] Bluetooth: RFCOMM TTY layer initialized [ 12.503191] Bluetooth: RFCOMM socket layer initialized [ 12.503197] Bluetooth: RFCOMM ver 1.11 [ 12.666621] init: avahi-cups-reload main process (692) terminated with status 1 [ 17.387164] tg3 0000:02:00.0: irq 45 for MSI/MSI-X [ 17.387173] tg3 0000:02:00.0: irq 46 for MSI/MSI-X [ 17.387179] tg3 0000:02:00.0: irq 47 for MSI/MSI-X [ 17.387184] tg3 0000:02:00.0: irq 48 for MSI/MSI-X [ 17.387188] tg3 0000:02:00.0: irq 49 for MSI/MSI-X [ 17.450385] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 17.451017] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 17.466191] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 17.469780] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 17.765930] audit_printk_skb: 33 callbacks suppressed [ 17.765936] type=1400 audit(1465318635.551:23): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=762 comm="apparmor_parser" [ 19.166305] wlan0: authenticate with 4c:ac:0a:12:3e:c7 [ 19.181391] wlan0: send auth to 4c:ac:0a:12:3e:c7 (try 1/3) [ 19.183476] wlan0: authenticated [ 19.186123] wlan0: associate with 4c:ac:0a:12:3e:c7 (try 1/3) [ 19.190349] wlan0: RX AssocResp from 4c:ac:0a:12:3e:c7 (capab=0x411 status=0 aid=1) [ 19.190401] wlan0: associated [ 19.190435] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 23.391904] type=1400 audit(1465318641.179:24): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=887 comm="apparmor_parser" [ 23.391914] type=1400 audit(1465318641.179:25): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=887 comm="apparmor_parser" [ 23.391919] type=1400 audit(1465318641.179:26): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=887 comm="apparmor_parser" [ 23.392466] type=1400 audit(1465318641.179:27): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=887 comm="apparmor_parser" [ 23.392471] type=1400 audit(1465318641.179:28): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=887 comm="apparmor_parser" [ 23.392805] type=1400 audit(1465318641.183:29): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=887 comm="apparmor_parser" [ 23.396356] type=1400 audit(1465318641.183:30): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cups-browsed" pid=891 comm="apparmor_parser" [ 23.401412] type=1400 audit(1465318641.191:31): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=892 comm="apparmor_parser" [ 23.401420] type=1400 audit(1465318641.191:32): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=892 comm="apparmor_parser" [ 24.442345] init: alsa-restore main process (981) terminated with status 99 [ 28.755658] init: plymouth-upstart-bridge main process ended, respawning [ 28.763589] init: plymouth-upstart-bridge main process (1251) terminated with status 1 [ 28.763613] init: plymouth-upstart-bridge main process ended, respawning [ 46.425875] ata1.00: exception Emask 0x0 SAct 0x6 SErr 0x0 action 0x0 [ 46.425881] ata1.00: irq_stat 0x40000008 [ 46.425884] ata1.00: failed command: READ FPDMA QUEUED [ 46.425890] ata1.00: cmd 60/00:10:00:13:31/01:00:00:00:00/40 tag 2 ncq 131072 in [ 46.425890] res 41/40:00:48:13:31/00:01:00:00:00/00 Emask 0x409 (media error) [ 46.425893] ata1.00: status: { DRDY ERR } [ 46.425896] ata1.00: error: { UNC } [ 46.738250] ata1.00: configured for UDMA/133 [ 46.738277] sd 0:0:0:0: [sda] Unhandled sense code [ 46.738280] sd 0:0:0:0: [sda] [ 46.738282] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 46.738284] sd 0:0:0:0: [sda] [ 46.738286] Sense Key : Medium Error [current] [descriptor] [ 46.738289] Descriptor sense data with sense descriptors (in hex): [ 46.738291] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 46.738300] 00 31 13 48 [ 46.738304] sd 0:0:0:0: [sda] [ 46.738307] Add. Sense: Unrecovered read error - auto reallocate failed [ 46.738310] sd 0:0:0:0: [sda] CDB: [ 46.738311] Read(10): 28 00 00 31 13 00 00 01 00 00 [ 46.738320] end_request: I/O error, dev sda, sector 3216200 [ 46.738344] ata1: EH complete [ 54.365565] ata1.00: qc timeout (cmd 0x2f) [ 54.381550] ata1: failed to read log page 10h (errno=-5) [ 54.381560] ata1.00: exception Emask 0x1 SAct 0x7fffffff SErr 0x0 action 0x6 frozen [ 54.381562] ata1.00: irq_stat 0x40000008 [ 54.381565] ata1.00: failed command: READ FPDMA QUEUED [ 54.381571] ata1.00: cmd 60/08:00:48:13:31/00:00:00:00:00/40 tag 0 ncq 4096 in [ 54.381571] res 40/00:08:90:49:ce/00:00:1d:00:00/40 Emask 0x1 (device error) [ 54.381574] ata1.00: status: { DRDY } [ 54.381576] ata1.00: failed command: READ FPDMA QUEUED [ 54.381581] ata1.00: cmd 60/10:08:90:49:ce/00:00:1d:00:00/40 tag 1 ncq 8192 in [ 54.381581] res 40/00:08:90:49:ce/00:00:1d:00:00/40 Emask 0x1 (device error) [ 54.381583] ata1.00: status: { DRDY } [ 54.381585] ata1.00: failed command: WRITE FPDMA QUEUED [ 54.381590] ata1.00: cmd 61/08:10:08:b0:07/00:00:00:00:00/40 tag 2 ncq 4096 out [ 54.381590] res 40/00:08:90:49:ce/00:00:1d:00:00/40 Emask 0x1 (device error) [ 54.381593] ata1.00: status: { DRDY } [ 54.381595] ata1.00: failed command: WRITE FPDMA QUEUED [ 54.381599] ata1.00: cmd 61/08:18:28:b0:07/00:00:00:00:00/40 tag 3 ncq 4096 out [ 54.381599] res 40/00:08:90:49:ce/00:00:1d:00:00/40 Emask 0x1 (device error) [ 54.381602] ata1.00: status: { DRDY } [ 54.381604] ata1.00: failed command: WRITE FPDMA QUEUED [ 54.381609] ata1.00: cmd 61/08:20:70:b0:07/00:00:00:00:00/40 tag 4 ncq 4096 out [ 54.381609] res 40/00:08:90:49:ce/00:00:1d:00:00/40 Emask 0x1 (device error) [ 54.381611] ata1.00: status: { DRDY } [ 54.381613] ata1.00: failed command: WRITE FPDMA QUEUED [ 54.381618] ata1.00: cmd 61/10:28:10:d0:07/00:00:00:00:00/40 tag 5 ncq 8192 out [ 54.381618] res 40/00:08:90:49:ce/00:00:1d:00:00/40 Emask 0x1 (device error) [ 54.381620] ata1.00: status: { DRDY } [ 54.381622] ata1.00: failed command: WRITE FPDMA QUEUED [ 54.381627] ata1.00: cmd 61/08:30:40:b0:47/00:00:00:00:00/40 tag 6 ncq 4096 out [ 54.381627] res 40/00:08:90:49:ce/00:00:1d:00:00/40 Emask 0x1 (device error) [ 54.381629] ata1.00: status: { DRDY } [ 54.381631] ata1.00: failed command: WRITE FPDMA QUEUED [ 54.381636] ata1.00: cmd 61/08:38:00:b0:c7/00:00:02:00:00/40 tag 7 ncq 4096 out [ 54.381636] res 40/00:08:90:49:ce/00:00:1d:00:00/40 Emask 0x1 (device error) [ 54.381638] ata1.00: status: { DRDY } [ 54.381640] ata1.00: failed command: WRITE FPDMA QUEUED [ 54.381645] ata1.00: cmd 61/10:40:08:b1:c8/00:00:02:00:00/40 tag 8 ncq 8192 out [ 54.381645] res 40/00:08:90:49:ce/00:00:1d:00:00/40 Emask 0x1 (device error) [ 54.381647] ata1.00: status: { DRDY } [ 54.381650] ata1.00: failed command: WRITE FPDMA QUEUED [ 54.381654] ata1.00: cmd 61/28:48:08:b1:07/00:00:04:00:00/40 tag 9 ncq 20480 out [ 54.381654] res 40/00:08:90:49:ce/00:00:1d:00:00/40 Emask 0x1 (device error) [ 54.381657] ata1.00: status: { DRDY } [ 54.381659] ata1.00: failed command: WRITE FPDMA QUEUED [ 54.381664] ata1.00: cmd 61/10:50:40:b1:07/00:00:04:00:00/40 tag 10 ncq 8192 out [ 54.381664] res 40/00:08:90:49:ce/00:00:1d:00:00/40 Emask 0x1 (device error) [ 54.381666] ata1.00: status: { DRDY } [ 54.381668] ata1.00: failed command: WRITE FPDMA QUEUED [ 54.381673] ata1.00: cmd 61/10:58:00:b0:c7/00:00:08:00:00/40 tag 11 ncq 8192 out [ 54.381673] res 40/00:08:90:49:ce/00:00:1d:00:00/40 Emask 0x1 (device error) [ 54.381675] ata1.00: status: { DRDY } [ 54.381677] ata1.00: failed command: WRITE FPDMA QUEUED [ 54.381682] ata1.00: cmd 61/08:60:80:b0:c7/00:00:08:00:00/40 tag 12 ncq 4096 out [ 54.381682] res 40/00:08:90:49:ce/00:00:1d:00:00/40 Emask 0x1 (device error) [ 54.381684] ata1.00: status: { DRDY } [ 54.381686] ata1.00: failed command: WRITE FPDMA QUEUED [ 54.381691] ata1.00: cmd 61/08:68:10:bf:48/00:00:33:00:00/40 tag 13 ncq 4096 out [ 54.381691] res 40/00:08:90:49:ce/00:00:1d:00:00/40 Emask 0x1 (device error) [ 54.381693] ata1.00: status: { DRDY } [ 54.381695] ata1.00: failed command: WRITE FPDMA QUEUED [ 54.381700] ata1.00: cmd 61/08:70:20:bf:48/00:00:33:00:00/40 tag 14 ncq 4096 out [ 54.381700] res 40/00:08:90:49:ce/00:00:1d:00:00/40 Emask 0x1 (device error) [ 54.381702] ata1.00: status: { DRDY } [ 54.381704] ata1.00: failed command: WRITE FPDMA QUEUED [ 54.381709] ata1.00: cmd 61/20:78:f0:bf:48/00:00:33:00:00/40 tag 15 ncq 16384 out [ 54.381709] res 40/00:08:90:49:ce/00:00:1d:00:00/40 Emask 0x1 (device error) [ 54.381711] ata1.00: status: { DRDY } [ 54.381713] ata1.00: failed command: WRITE FPDMA QUEUED [ 54.381718] ata1.00: cmd 61/20:80:18:c0:48/00:00:33:00:00/40 tag 16 ncq 16384 out [ 54.381718] res 40/00:08:90:49:ce/00:00:1d:00:00/40 Emask 0x1 (device error) [ 54.381720] ata1.00: status: { DRDY } [ 54.381722] ata1.00: failed command: WRITE FPDMA QUEUED [ 54.381727] ata1.00: cmd 61/30:88:40:c0:48/00:00:33:00:00/40 tag 17 ncq 24576 out [ 54.381727] res 40/00:08:90:49:ce/00:00:1d:00:00/40 Emask 0x1 (device error) [ 54.381729] ata1.00: status: { DRDY } [ 54.381731] ata1.00: failed command: WRITE FPDMA QUEUED [ 54.381736] ata1.00: cmd 61/10:90:00:b1:c7/00:00:08:00:00/40 tag 18 ncq 8192 out [ 54.381736] res 40/00:08:90:49:ce/00:00:1d:00:00/40 Emask 0x1 (device error) [ 54.381739] ata1.00: status: { DRDY } [ 54.381741] ata1.00: failed command: WRITE FPDMA QUEUED [ 54.381745] ata1.00: cmd 61/08:98:20:b1:c7/00:00:08:00:00/40 tag 19 ncq 4096 out [ 54.381745] res 40/00:08:90:49:ce/00:00:1d:00:00/40 Emask 0x1 (device error) [ 54.381748] ata1.00: status: { DRDY } [ 54.381750] ata1.00: failed command: WRITE FPDMA QUEUED [ 54.381754] ata1.00: cmd 61/50:a0:30:b1:c7/00:00:08:00:00/40 tag 20 ncq 40960 out [ 54.381754] res 40/00:08:90:49:ce/00:00:1d:00:00/40 Emask 0x1 (device error) [ 54.381757] ata1.00: status: { DRDY } [ 54.381759] ata1.00: failed command: WRITE FPDMA QUEUED [ 54.381763] ata1.00: cmd 61/18:a8:a0:b1:c7/00:00:08:00:00/40 tag 21 ncq 12288 out [ 54.381763] res 40/00:08:90:49:ce/00:00:1d:00:00/40 Emask 0x1 (device error) [ 54.381766] ata1.00: status: { DRDY } [ 54.381768] ata1.00: failed command: WRITE FPDMA QUEUED [ 54.381773] ata1.00: cmd 61/18:b0:d8:b1:c7/00:00:08:00:00/40 tag 22 ncq 12288 out [ 54.381773] res 40/00:08:90:49:ce/00:00:1d:00:00/40 Emask 0x1 (device error) [ 54.381776] ata1.00: status: { DRDY } [ 54.381778] ata1.00: failed command: WRITE FPDMA QUEUED [ 54.381782] ata1.00: cmd 61/10:b8:40:b2:c7/00:00:08:00:00/40 tag 23 ncq 8192 out [ 54.381782] res 40/00:08:90:49:ce/00:00:1d:00:00/40 Emask 0x1 (device error) [ 54.381785] ata1.00: status: { DRDY } [ 54.381787] ata1.00: failed command: WRITE FPDMA QUEUED [ 54.381791] ata1.00: cmd 61/08:c0:f8:b2:c7/00:00:08:00:00/40 tag 24 ncq 4096 out [ 54.381791] res 40/00:08:90:49:ce/00:00:1d:00:00/40 Emask 0x1 (device error) [ 54.381794] ata1.00: status: { DRDY } [ 54.381796] ata1.00: failed command: WRITE FPDMA QUEUED [ 54.381800] ata1.00: cmd 61/90:c8:08:b3:c7/00:00:08:00:00/40 tag 25 ncq 73728 out [ 54.381800] res 40/00:08:90:49:ce/00:00:1d:00:00/40 Emask 0x1 (device error) [ 54.381803] ata1.00: status: { DRDY } [ 54.381805] ata1.00: failed command: WRITE FPDMA QUEUED [ 54.381810] ata1.00: cmd 61/08:d0:a0:b3:c7/00:00:08:00:00/40 tag 26 ncq 4096 out [ 54.381810] res 40/00:08:90:49:ce/00:00:1d:00:00/40 Emask 0x1 (device error) [ 54.381812] ata1.00: status: { DRDY } [ 54.381814] ata1.00: failed command: WRITE FPDMA QUEUED [ 54.381818] ata1.00: cmd 61/18:d8:d8:b3:c7/00:00:08:00:00/40 tag 27 ncq 12288 out [ 54.381818] res 40/00:08:90:49:ce/00:00:1d:00:00/40 Emask 0x1 (device error) [ 54.381821] ata1.00: status: { DRDY } [ 54.381823] ata1.00: failed command: WRITE FPDMA QUEUED [ 54.381828] ata1.00: cmd 61/08:e0:00:b4:c7/00:00:08:00:00/40 tag 28 ncq 4096 out [ 54.381828] res 40/00:08:90:49:ce/00:00:1d:00:00/40 Emask 0x1 (device error) [ 54.381830] ata1.00: status: { DRDY } [ 54.381832] ata1.00: failed command: WRITE FPDMA QUEUED [ 54.381837] ata1.00: cmd 61/50:e8:10:b4:c7/00:00:08:00:00/40 tag 29 ncq 40960 out [ 54.381837] res 40/00:08:90:49:ce/00:00:1d:00:00/40 Emask 0x1 (device error) [ 54.381839] ata1.00: status: { DRDY } [ 54.381841] ata1.00: failed command: WRITE FPDMA QUEUED [ 54.381846] ata1.00: cmd 61/10:f0:70:b4:c7/00:00:08:00:00/40 tag 30 ncq 8192 out [ 54.381846] res 40/00:08:90:49:ce/00:00:1d:00:00/40 Emask 0x1 (device error) [ 54.381848] ata1.00: status: { DRDY } [ 54.381852] ata1: hard resetting link [ 54.709617] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 54.711193] ata1.00: configured for UDMA/133 [ 54.725643] ata1: EH complete [ 57.297897] ata1.00: exception Emask 0x0 SAct 0x7fffffff SErr 0x0 action 0x0 [ 57.297903] ata1.00: irq_stat 0x40000008 [ 57.297907] ata1.00: failed command: READ FPDMA QUEUED [ 57.297913] ata1.00: cmd 60/08:f0:48:13:31/00:00:00:00:00/40 tag 30 ncq 4096 in [ 57.297913] res 41/40:08:48:13:31/00:00:00:00:00/00 Emask 0x409 (media error) [ 57.297916] ata1.00: status: { DRDY ERR } [ 57.297918] ata1.00: error: { UNC } [ 57.630626] ata1.00: configured for UDMA/133 [ 57.630673] sd 0:0:0:0: [sda] Unhandled sense code [ 57.630676] sd 0:0:0:0: [sda] [ 57.630678] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 57.630680] sd 0:0:0:0: [sda] [ 57.630682] Sense Key : Medium Error [current] [descriptor] [ 57.630686] Descriptor sense data with sense descriptors (in hex): [ 57.630687] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 57.630698] 00 31 13 48 [ 57.630703] sd 0:0:0:0: [sda] [ 57.630705] Add. Sense: Unrecovered read error - auto reallocate failed [ 57.630708] sd 0:0:0:0: [sda] CDB: [ 57.630709] Read(10): 28 00 00 31 13 48 00 00 08 00 [ 57.630718] end_request: I/O error, dev sda, sector 3216200 [ 57.630737] ata1: EH complete [ 60.204118] ata1.00: exception Emask 0x0 SAct 0x7fffffff SErr 0x0 action 0x0 [ 60.204124] ata1.00: irq_stat 0x40000008 [ 60.204127] ata1.00: failed command: READ FPDMA QUEUED [ 60.204133] ata1.00: cmd 60/08:18:48:13:31/00:00:00:00:00/40 tag 3 ncq 4096 in [ 60.204133] res 41/40:08:48:13:31/00:00:00:00:00/00 Emask 0x409 (media error) [ 60.204136] ata1.00: status: { DRDY ERR } [ 60.204138] ata1.00: error: { UNC } [ 60.448831] ata1.00: configured for UDMA/133 [ 60.448864] sd 0:0:0:0: [sda] Unhandled sense code [ 60.448867] sd 0:0:0:0: [sda] [ 60.448869] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 60.448871] sd 0:0:0:0: [sda] [ 60.448873] Sense Key : Medium Error [current] [descriptor] [ 60.448876] Descriptor sense data with sense descriptors (in hex): [ 60.448878] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 60.448888] 00 31 13 48 [ 60.448893] sd 0:0:0:0: [sda] [ 60.448895] Add. Sense: Unrecovered read error - auto reallocate failed [ 60.448898] sd 0:0:0:0: [sda] CDB: [ 60.448900] Read(10): 28 00 00 31 13 48 00 00 08 00 [ 60.448909] end_request: I/O error, dev sda, sector 3216200 [ 60.448939] ata1: EH complete [ 67.031883] ata1: failed to read log page 10h (errno=-5) [ 67.031893] ata1.00: exception Emask 0x1 SAct 0x3 SErr 0x0 action 0x0 [ 67.031895] ata1.00: irq_stat 0x40000008 [ 67.031898] ata1.00: failed command: READ FPDMA QUEUED [ 67.031904] ata1.00: cmd 60/08:00:48:13:31/00:00:00:00:00/40 tag 0 ncq 4096 in [ 67.031904] res 40/00:00:48:13:31/00:00:00:00:00/40 Emask 0x1 (device error) [ 67.031906] ata1.00: status: { DRDY } [ 67.031909] ata1.00: failed command: WRITE FPDMA QUEUED [ 67.031913] ata1.00: cmd 61/08:08:a0:a0:4f/00:00:33:00:00/40 tag 1 ncq 4096 out [ 67.031913] res 40/00:00:48:13:31/00:00:00:00:00/40 Emask 0x1 (device error) [ 67.031916] ata1.00: status: { DRDY } [ 72.032775] ata1.00: qc timeout (cmd 0xec) [ 72.048735] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x5) [ 72.048740] ata1.00: revalidation failed (errno=-5) [ 72.048746] ata1: hard resetting link [ 72.376799] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 72.378243] ata1.00: configured for UDMA/133 [ 72.392798] ata1: EH complete [ 74.945223] ata1.00: exception Emask 0x0 SAct 0x2 SErr 0x0 action 0x0 [ 74.945229] ata1.00: irq_stat 0x40000008 [ 74.945232] ata1.00: failed command: READ FPDMA QUEUED [ 74.945238] ata1.00: cmd 60/08:08:48:13:31/00:00:00:00:00/40 tag 1 ncq 4096 in [ 74.945238] res 41/40:08:48:13:31/00:00:00:00:00/00 Emask 0x409 (media error) [ 74.945241] ata1.00: status: { DRDY ERR } [ 74.945243] ata1.00: error: { UNC } [ 75.122871] ata1.00: configured for UDMA/133 [ 75.122890] sd 0:0:0:0: [sda] Unhandled sense code [ 75.122893] sd 0:0:0:0: [sda] [ 75.122895] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 75.122897] sd 0:0:0:0: [sda] [ 75.122898] Sense Key : Medium Error [current] [descriptor] [ 75.122902] Descriptor sense data with sense descriptors (in hex): [ 75.122903] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 75.122912] 00 31 13 48 [ 75.122916] sd 0:0:0:0: [sda] [ 75.122919] Add. Sense: Unrecovered read error - auto reallocate failed [ 75.122921] sd 0:0:0:0: [sda] CDB: [ 75.122923] Read(10): 28 00 00 31 13 48 00 00 08 00 [ 75.122931] end_request: I/O error, dev sda, sector 3216200 [ 75.122954] ata1: EH complete [ 77.696172] ata1.00: exception Emask 0x0 SAct 0x2 SErr 0x0 action 0x0 [ 77.696177] ata1.00: irq_stat 0x40000008 [ 77.696181] ata1.00: failed command: READ FPDMA QUEUED [ 77.696187] ata1.00: cmd 60/08:08:48:13:31/00:00:00:00:00/40 tag 1 ncq 4096 in [ 77.696187] res 41/40:08:48:13:31/00:00:00:00:00/00 Emask 0x409 (media error) [ 77.696190] ata1.00: status: { DRDY ERR } [ 77.696192] ata1.00: error: { UNC } [ 77.898762] ata1.00: configured for UDMA/133 [ 77.898780] sd 0:0:0:0: [sda] Unhandled sense code [ 77.898783] sd 0:0:0:0: [sda] [ 77.898784] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 77.898786] sd 0:0:0:0: [sda] [ 77.898788] Sense Key : Medium Error [current] [descriptor] [ 77.898791] Descriptor sense data with sense descriptors (in hex): [ 77.898793] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 77.898802] 00 31 13 48 [ 77.898806] sd 0:0:0:0: [sda] [ 77.898808] Add. Sense: Unrecovered read error - auto reallocate failed [ 77.898810] sd 0:0:0:0: [sda] CDB: [ 77.898812] Read(10): 28 00 00 31 13 48 00 00 08 00 [ 77.898820] end_request: I/O error, dev sda, sector 3216200 [ 77.898843] ata1: EH complete [ 772.491691] ata1: failed to read log page 10h (errno=-5) [ 772.491709] ata1.00: exception Emask 0x1 SAct 0x7 SErr 0x0 action 0x0 [ 772.491715] ata1.00: irq_stat 0x40000008 [ 772.491721] ata1.00: failed command: READ FPDMA QUEUED [ 772.491733] ata1.00: cmd 60/20:00:00:10:1f/00:00:00:00:00/40 tag 0 ncq 16384 in [ 772.491733] res 40/00:08:60:05:1f/00:00:00:00:00/40 Emask 0x1 (device error) [ 772.491739] ata1.00: status: { DRDY } [ 772.491745] ata1.00: failed command: READ FPDMA QUEUED [ 772.491755] ata1.00: cmd 60/78:08:60:05:1f/00:00:00:00:00/40 tag 1 ncq 61440 in [ 772.491755] res 40/00:08:60:05:1f/00:00:00:00:00/40 Emask 0x1 (device error) [ 772.491761] ata1.00: status: { DRDY } [ 772.491766] ata1.00: failed command: WRITE FPDMA QUEUED [ 772.491777] ata1.00: cmd 61/08:10:58:d1:13/00:00:00:00:00/40 tag 2 ncq 4096 out [ 772.491777] res 40/00:08:60:05:1f/00:00:00:00:00/40 Emask 0x1 (device error) [ 772.491782] ata1.00: status: { DRDY } [ 772.726466] ata1.00: configured for UDMA/133 [ 772.732389] ata1: exception Emask 0x2 SAct 0x0 SErr 0x3000400 action 0x6 t4 [ 772.732394] ata1: irq_stat 0x40000001 [ 772.732398] ata1: SError: { Proto TrStaTrns UnrecFIS } [ 772.732404] ata1: hard resetting link [ 773.060474] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 773.062063] ata1.00: configured for UDMA/133 [ 773.076480] ata1: EH complete [ 775.628822] ata1.00: exception Emask 0x0 SAct 0x6 SErr 0x0 action 0x0 [ 775.628888] ata1.00: irq_stat 0x40000008 [ 775.628904] ata1.00: failed command: READ FPDMA QUEUED [ 775.628922] ata1.00: cmd 60/78:08:60:05:1f/00:00:00:00:00/40 tag 1 ncq 61440 in [ 775.628922] res 41/40:78:a8:05:1f/00:00:00:00:00/00 Emask 0x409 (media error) [ 775.628930] ata1.00: status: { DRDY ERR } [ 775.628937] ata1.00: error: { UNC } [ 775.797260] ata1.00: configured for UDMA/133 [ 775.797297] sd 0:0:0:0: [sda] Unhandled sense code [ 775.797302] sd 0:0:0:0: [sda] [ 775.797306] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 775.797311] sd 0:0:0:0: [sda] [ 775.797315] Sense Key : Medium Error [current] [descriptor] [ 775.797322] Descriptor sense data with sense descriptors (in hex): [ 775.797326] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 775.797346] 00 1f 05 a8 [ 775.797355] sd 0:0:0:0: [sda] [ 775.797360] Add. Sense: Unrecovered read error - auto reallocate failed [ 775.797365] sd 0:0:0:0: [sda] CDB: [ 775.797368] Read(10): 28 00 00 1f 05 60 00 00 78 00 [ 775.797386] end_request: I/O error, dev sda, sector 2033064 [ 775.797428] ata1: EH complete [ 869.651363] init: upstart-udev-bridge main process (326) terminated with status 1 [ 869.651413] init: upstart-udev-bridge main process ended, respawning [ 869.651955] init: upstart-file-bridge main process (496) terminated with status 1 [ 869.651985] init: upstart-file-bridge main process ended, respawning [ 869.652384] init: upstart-socket-bridge main process (591) terminated with status 1 [ 869.652414] init: upstart-socket-bridge main process ended, respawning [ 873.331860] init: upstart-udev-bridge main process (24999) terminated with status 1 [ 873.331886] init: upstart-udev-bridge main process ended, respawning [ 873.332163] init: upstart-file-bridge main process (25003) terminated with status 1 [ 873.332183] init: upstart-file-bridge main process ended, respawning [ 873.332861] init: upstart-socket-bridge main process (25007) terminated with status 1 [ 873.332925] init: upstart-socket-bridge main process ended, respawning [ 1008.631722] init: systemd-logind main process (686) killed by TERM signal [ 1125.248543] ata1.00: qc timeout (cmd 0x2f) [ 1125.248560] ata1: failed to read log page 10h (errno=-5) [ 1125.248575] ata1.00: exception Emask 0x1 SAct 0x3 SErr 0x0 action 0x6 frozen [ 1125.248581] ata1.00: irq_stat 0x40000008 [ 1125.248588] ata1.00: failed command: READ FPDMA QUEUED [ 1125.248600] ata1.00: cmd 60/08:00:a8:05:1f/00:00:00:00:00/40 tag 0 ncq 4096 in [ 1125.248600] res 40/00:00:a8:05:1f/00:00:00:00:00/40 Emask 0x1 (device error) [ 1125.248606] ata1.00: status: { DRDY } [ 1125.248611] ata1.00: failed command: WRITE FPDMA QUEUED [ 1125.248622] ata1.00: cmd 61/40:08:00:18:71/01:00:00:00:00/40 tag 1 ncq 163840 out [ 1125.248622] res 40/00:00:a8:05:1f/00:00:00:00:00/40 Emask 0x1 (device error) [ 1125.248628] ata1.00: status: { DRDY } [ 1125.248639] ata1: hard resetting link [ 1125.568651] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1125.570049] ata1.00: configured for UDMA/133 [ 1125.584669] ata1: EH complete [ 1128.135275] ata1.00: exception Emask 0x0 SAct 0x2 SErr 0x0 action 0x0 [ 1128.135280] ata1.00: irq_stat 0x40000008 [ 1128.135283] ata1.00: failed command: READ FPDMA QUEUED [ 1128.135288] ata1.00: cmd 60/08:08:a8:05:1f/00:00:00:00:00/40 tag 1 ncq 4096 in [ 1128.135288] res 41/40:08:a8:05:1f/00:00:00:00:00/00 Emask 0x409 (media error) [ 1128.135291] ata1.00: status: { DRDY ERR } [ 1128.135293] ata1.00: error: { UNC } [ 1128.279775] ata1.00: configured for UDMA/133 [ 1128.279819] sd 0:0:0:0: [sda] Unhandled sense code [ 1128.279825] sd 0:0:0:0: [sda] [ 1128.279829] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 1128.279834] sd 0:0:0:0: [sda] [ 1128.279837] Sense Key : Medium Error [current] [descriptor] [ 1128.279845] Descriptor sense data with sense descriptors (in hex): [ 1128.279848] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 1128.279869] 00 1f 05 a8 [ 1128.279878] sd 0:0:0:0: [sda] [ 1128.279883] Add. Sense: Unrecovered read error - auto reallocate failed [ 1128.279887] sd 0:0:0:0: [sda] CDB: [ 1128.279890] Read(10): 28 00 00 1f 05 a8 00 00 08 00 [ 1128.279908] end_request: I/O error, dev sda, sector 2033064 [ 1128.279953] ata1: EH complete [ 1130.819601] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 1130.819609] ata1.00: irq_stat 0x40000008 [ 1130.819615] ata1.00: failed command: READ FPDMA QUEUED [ 1130.819627] ata1.00: cmd 60/08:00:a8:05:1f/00:00:00:00:00/40 tag 0 ncq 4096 in [ 1130.819627] res 41/40:08:a8:05:1f/00:00:00:00:00/00 Emask 0x409 (media error) [ 1130.819633] ata1.00: status: { DRDY ERR } [ 1130.819635] ata1.00: error: { UNC } [ 1130.989940] ata1.00: configured for UDMA/133 [ 1130.989954] sd 0:0:0:0: [sda] Unhandled sense code [ 1130.989957] sd 0:0:0:0: [sda] [ 1130.989959] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 1130.989961] sd 0:0:0:0: [sda] [ 1130.989962] Sense Key : Medium Error [current] [descriptor] [ 1130.989966] Descriptor sense data with sense descriptors (in hex): [ 1130.989967] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 1130.989977] 00 1f 05 a8 [ 1130.989981] sd 0:0:0:0: [sda] [ 1130.989983] Add. Sense: Unrecovered read error - auto reallocate failed [ 1130.989985] sd 0:0:0:0: [sda] CDB: [ 1130.989986] Read(10): 28 00 00 1f 05 a8 00 00 08 00 [ 1130.989994] end_request: I/O error, dev sda, sector 2033064 [ 1130.990011] ata1: EH complete [ 1144.923541] init: upstart-udev-bridge main process (25062) terminated with status 1 [ 1144.923567] init: upstart-udev-bridge main process ended, respawning [ 1144.923838] init: upstart-socket-bridge main process (25065) terminated with status 1 [ 1144.923851] init: upstart-socket-bridge main process ended, respawning [ 1144.924066] init: upstart-file-bridge main process (25070) terminated with status 1 [ 1144.924078] init: upstart-file-bridge main process ended, respawning [ 1148.652569] init: upstart-udev-bridge main process (4233) terminated with status 1 [ 1148.652610] init: upstart-udev-bridge main process ended, respawning [ 1148.652952] init: upstart-socket-bridge main process (4239) terminated with status 1 [ 1148.652982] init: upstart-socket-bridge main process ended, respawning [ 1148.653210] init: upstart-file-bridge main process (4244) terminated with status 1 [ 1148.653226] init: upstart-file-bridge main process ended, respawning [ 1199.303867] audit_printk_skb: 123 callbacks suppressed [ 1199.303871] type=1400 audit(1465319816.913:74): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cups-browsed" pid=4859 comm="apparmor_parser" [ 1199.703980] type=1400 audit(1465319817.313:75): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cups-browsed" pid=4898 comm="apparmor_parser" [ 1209.974394] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 1215.649747] type=1400 audit(1465319833.265:76): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=5131 comm="apparmor_parser" [ 1215.650275] type=1400 audit(1465319833.265:77): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=5131 comm="apparmor_parser" [ 1215.785660] type=1400 audit(1465319833.401:78): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=5168 comm="apparmor_parser" [ 1215.785676] type=1400 audit(1465319833.401:79): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=5168 comm="apparmor_parser" [ 1215.786567] type=1400 audit(1465319833.401:80): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=5168 comm="apparmor_parser" [ 1219.535876] type=1400 audit(1465319837.153:81): apparmor="DENIED" operation="signal" profile="/usr/sbin/cupsd" pid=5169 comm="cupsd" requested_mask="send" denied_mask="send" signal=term peer="unconfined" [ 1219.535887] type=1400 audit(1465319837.153:82): apparmor="DENIED" operation="signal" profile="/usr/sbin/cupsd" pid=5169 comm="cupsd" requested_mask="send" denied_mask="send" signal=term peer="unconfined" [ 1219.535895] type=1400 audit(1465319837.153:83): apparmor="DENIED" operation="signal" profile="/usr/sbin/cupsd" pid=5169 comm="cupsd" requested_mask="send" denied_mask="send" signal=term peer="unconfined" [ 3360.720573] systemd-hostnamed[5903]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [ 3684.498414] usb 3-2: new high-speed USB device number 3 using xhci_hcd [ 3684.517435] usb 3-2: New USB device found, idVendor=03f0, idProduct=3307 [ 3684.517446] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3684.517452] usb 3-2: Product: v125w [ 3684.517457] usb 3-2: Manufacturer: HP [ 3684.517461] usb 3-2: SerialNumber: 6E9508131686 [ 3684.538615] WARNING! power/level is deprecated; use power/control instead [ 3684.550170] usb-storage 3-2:1.0: USB Mass Storage device detected [ 3684.550411] scsi6 : usb-storage 3-2:1.0 [ 3684.550521] usbcore: registered new interface driver usb-storage [ 3685.575506] scsi 6:0:0:0: Direct-Access HP v125w PMAP PQ: 0 ANSI: 0 CCS [ 3685.576526] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 3686.144393] sd 6:0:0:0: [sdb] 15667200 512-byte logical blocks: (8.02 GB/7.47 GiB) [ 3686.144634] sd 6:0:0:0: [sdb] Write Protect is off [ 3686.144640] sd 6:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 3686.144882] sd 6:0:0:0: [sdb] No Caching mode page found [ 3686.144887] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 3686.148344] sd 6:0:0:0: [sdb] No Caching mode page found [ 3686.148351] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 3686.168391] sdb: sdb1 [ 3686.169274] sd 6:0:0:0: [sdb] No Caching mode page found [ 3686.169279] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 3686.169282] sd 6:0:0:0: [sdb] Attached SCSI removable disk [ 3686.676833] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 3686.864368] systemd-hostnamed[5961]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [ 3715.170225] sdb: detected capacity change from 8021606400 to 0 [ 4164.225850] usb 3-2: USB disconnect, device number 3 [ 5106.930057] usb 3-2: new high-speed USB device number 4 using xhci_hcd [ 5106.949188] usb 3-2: New USB device found, idVendor=03f0, idProduct=3307 [ 5106.949199] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 5106.949205] usb 3-2: Product: v125w [ 5106.949209] usb 3-2: Manufacturer: HP [ 5106.949214] usb 3-2: SerialNumber: 6E9508131686 [ 5106.950092] usb-storage 3-2:1.0: USB Mass Storage device detected [ 5106.950448] scsi7 : usb-storage 3-2:1.0 [ 5107.974937] scsi 7:0:0:0: Direct-Access HP v125w PMAP PQ: 0 ANSI: 0 CCS [ 5107.975855] sd 7:0:0:0: Attached scsi generic sg2 type 0 [ 5109.049785] sd 7:0:0:0: [sdb] 15667200 512-byte logical blocks: (8.02 GB/7.47 GiB) [ 5109.050049] sd 7:0:0:0: [sdb] Write Protect is off [ 5109.050071] sd 7:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 5109.050312] sd 7:0:0:0: [sdb] No Caching mode page found [ 5109.050316] sd 7:0:0:0: [sdb] Assuming drive cache: write through [ 5109.053385] sd 7:0:0:0: [sdb] No Caching mode page found [ 5109.053390] sd 7:0:0:0: [sdb] Assuming drive cache: write through [ 5109.072647] sdb: sdb1 [ 5109.075115] sd 7:0:0:0: [sdb] No Caching mode page found [ 5109.075139] sd 7:0:0:0: [sdb] Assuming drive cache: write through [ 5109.075145] sd 7:0:0:0: [sdb] Attached SCSI removable disk [ 5109.517530] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 5109.661583] systemd-hostnamed[6173]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [ 5626.669533] systemd-hostnamed[6214]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [ 5774.288628] sdb: detected capacity change from 8021606400 to 0 [ 5790.403769] usb 3-2: USB disconnect, device number 4 [ 6154.224840] ata1.00: qc timeout (cmd 0x2f) [ 6154.232812] ata1: failed to read log page 10h (errno=-5) [ 6154.232828] ata1.00: exception Emask 0x1 SAct 0x3 SErr 0x0 action 0x6 frozen [ 6154.232833] ata1.00: irq_stat 0x40000008 [ 6154.232839] ata1.00: failed command: READ FPDMA QUEUED [ 6154.232851] ata1.00: cmd 60/08:00:a8:05:1f/00:00:00:00:00/40 tag 0 ncq 4096 in [ 6154.232851] res 40/00:08:10:32:4c/00:00:0c:00:00/40 Emask 0x1 (device error) [ 6154.232857] ata1.00: status: { DRDY } [ 6154.232863] ata1.00: failed command: WRITE FPDMA QUEUED [ 6154.232873] ata1.00: cmd 61/40:08:00:fe:7e/01:00:00:00:00/40 tag 1 ncq 163840 out [ 6154.232873] res 40/00:08:10:32:4c/00:00:0c:00:00/40 Emask 0x1 (device error) [ 6154.232879] ata1.00: status: { DRDY } [ 6154.232889] ata1: hard resetting link [ 6154.552743] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 6154.554224] ata1.00: configured for UDMA/133 [ 6154.568742] ata1: EH complete [ 6157.116752] ata1.00: exception Emask 0x0 SAct 0x2 SErr 0x0 action 0x0 [ 6157.116758] ata1.00: irq_stat 0x40000008 [ 6157.116761] ata1.00: failed command: READ FPDMA QUEUED [ 6157.116767] ata1.00: cmd 60/08:08:a8:05:1f/00:00:00:00:00/40 tag 1 ncq 4096 in [ 6157.116767] res 41/40:08:a8:05:1f/00:00:00:00:00/00 Emask 0x409 (media error) [ 6157.116770] ata1.00: status: { DRDY ERR } [ 6157.116772] ata1.00: error: { UNC } [ 6157.257674] ata1.00: configured for UDMA/133 [ 6157.257691] sd 0:0:0:0: [sda] Unhandled sense code [ 6157.257694] sd 0:0:0:0: [sda] [ 6157.257696] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 6157.257698] sd 0:0:0:0: [sda] [ 6157.257700] Sense Key : Medium Error [current] [descriptor] [ 6157.257704] Descriptor sense data with sense descriptors (in hex): [ 6157.257705] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 6157.257714] 00 1f 05 a8 [ 6157.257719] sd 0:0:0:0: [sda] [ 6157.257721] Add. Sense: Unrecovered read error - auto reallocate failed [ 6157.257723] sd 0:0:0:0: [sda] CDB: [ 6157.257725] Read(10): 28 00 00 1f 05 a8 00 00 08 00 [ 6157.257733] end_request: I/O error, dev sda, sector 2033064 [ 6157.257754] ata1: EH complete [ 6159.801030] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6159.801041] ata1.00: irq_stat 0x40000008 [ 6159.801049] ata1.00: failed command: READ FPDMA QUEUED [ 6159.801062] ata1.00: cmd 60/08:00:a8:05:1f/00:00:00:00:00/40 tag 0 ncq 4096 in [ 6159.801062] res 41/40:08:a8:05:1f/00:00:00:00:00/00 Emask 0x409 (media error) [ 6159.801068] ata1.00: status: { DRDY ERR } [ 6159.801073] ata1.00: error: { UNC } [ 6159.938766] ata1.00: configured for UDMA/133 [ 6159.938797] sd 0:0:0:0: [sda] Unhandled sense code [ 6159.938802] sd 0:0:0:0: [sda] [ 6159.938806] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 6159.938811] sd 0:0:0:0: [sda] [ 6159.938814] Sense Key : Medium Error [current] [descriptor] [ 6159.938821] Descriptor sense data with sense descriptors (in hex): [ 6159.938825] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 6159.938845] 00 1f 05 a8 [ 6159.938854] sd 0:0:0:0: [sda] [ 6159.938859] Add. Sense: Unrecovered read error - auto reallocate failed [ 6159.938864] sd 0:0:0:0: [sda] CDB: [ 6159.938867] Read(10): 28 00 00 1f 05 a8 00 00 08 00 [ 6159.938885] end_request: I/O error, dev sda, sector 2033064 [ 6159.938919] ata1: EH complete [ 6554.189911] perf samples too long (2513 > 2500), lowering kernel.perf_event_max_sample_rate to 50000 [ 6625.005439] ata1.00: exception Emask 0x0 SAct 0x104 SErr 0x0 action 0x0 [ 6625.005444] ata1.00: irq_stat 0x40000008 [ 6625.005448] ata1.00: failed command: READ FPDMA QUEUED [ 6625.005455] ata1.00: cmd 60/00:10:e0:1a:21/01:00:00:00:00/40 tag 2 ncq 131072 in [ 6625.005455] res 41/40:00:58:1b:21/00:01:00:00:00/00 Emask 0x409 (media error) [ 6625.005467] ata1.00: status: { DRDY ERR } [ 6625.005469] ata1.00: error: { UNC } [ 6625.245308] ata1.00: configured for UDMA/133 [ 6625.245323] sd 0:0:0:0: [sda] Unhandled sense code [ 6625.245326] sd 0:0:0:0: [sda] [ 6625.245328] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 6625.245331] sd 0:0:0:0: [sda] [ 6625.245333] Sense Key : Medium Error [current] [descriptor] [ 6625.245337] Descriptor sense data with sense descriptors (in hex): [ 6625.245338] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 6625.245349] 00 21 1b 58 [ 6625.245354] sd 0:0:0:0: [sda] [ 6625.245357] Add. Sense: Unrecovered read error - auto reallocate failed [ 6625.245360] sd 0:0:0:0: [sda] CDB: [ 6625.245361] Read(10): 28 00 00 21 1a e0 00 01 00 00 [ 6625.245371] end_request: I/O error, dev sda, sector 2169688 [ 6625.245397] ata1: EH complete [ 6627.890719] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6627.890724] ata1.00: irq_stat 0x40000008 [ 6627.890728] ata1.00: failed command: READ FPDMA QUEUED [ 6627.890734] ata1.00: cmd 60/08:00:58:1b:21/00:00:00:00:00/40 tag 0 ncq 4096 in [ 6627.890734] res 41/40:08:58:1b:21/00:00:00:00:00/00 Emask 0x409 (media error) [ 6627.890736] ata1.00: status: { DRDY ERR } [ 6627.890738] ata1.00: error: { UNC } [ 6628.043437] ata1.00: configured for UDMA/133 [ 6628.043452] sd 0:0:0:0: [sda] Unhandled sense code [ 6628.043454] sd 0:0:0:0: [sda] [ 6628.043457] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 6628.043460] sd 0:0:0:0: [sda] [ 6628.043463] Sense Key : Medium Error [current] [descriptor] [ 6628.043467] Descriptor sense data with sense descriptors (in hex): [ 6628.043469] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 6628.043482] 00 21 1b 58 [ 6628.043488] sd 0:0:0:0: [sda] [ 6628.043491] Add. Sense: Unrecovered read error - auto reallocate failed [ 6628.043494] sd 0:0:0:0: [sda] CDB: [ 6628.043496] Read(10): 28 00 00 21 1b 58 00 00 08 00 [ 6628.043508] end_request: I/O error, dev sda, sector 2169688 [ 6628.043525] ata1: EH complete [ 6757.977092] ata1.00: exception Emask 0x0 SAct 0x3 SErr 0x0 action 0x0 [ 6757.977099] ata1.00: irq_stat 0x40000008 [ 6757.977104] ata1.00: failed command: READ FPDMA QUEUED [ 6757.977115] ata1.00: cmd 60/00:00:e0:aa:21/01:00:00:00:00/40 tag 0 ncq 131072 in [ 6757.977115] res 41/40:00:d8:ab:21/00:01:00:00:00/00 Emask 0x409 (media error) [ 6757.977121] ata1.00: status: { DRDY ERR } [ 6757.977124] ata1.00: error: { UNC } [ 6758.135732] ata1.00: configured for UDMA/133 [ 6758.135749] sd 0:0:0:0: [sda] Unhandled sense code [ 6758.135753] sd 0:0:0:0: [sda] [ 6758.135755] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 6758.135758] sd 0:0:0:0: [sda] [ 6758.135760] Sense Key : Medium Error [current] [descriptor] [ 6758.135765] Descriptor sense data with sense descriptors (in hex): [ 6758.135767] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 6758.135779] 00 21 ab d8 [ 6758.135784] sd 0:0:0:0: [sda] [ 6758.135787] Add. Sense: Unrecovered read error - auto reallocate failed [ 6758.135791] sd 0:0:0:0: [sda] CDB: [ 6758.135793] Read(10): 28 00 00 21 aa e0 00 01 00 00 [ 6758.135804] end_request: I/O error, dev sda, sector 2206680 [ 6758.135828] ata1: EH complete [ 6765.782312] ata1.00: qc timeout (cmd 0x2f) [ 6765.798304] ata1: failed to read log page 10h (errno=-5) [ 6765.798313] ata1.00: exception Emask 0x1 SAct 0x3 SErr 0x0 action 0x6 frozen [ 6765.798317] ata1.00: irq_stat 0x40000008 [ 6765.798320] ata1.00: failed command: READ FPDMA QUEUED [ 6765.798326] ata1.00: cmd 60/08:00:d8:ab:21/00:00:00:00:00/40 tag 0 ncq 4096 in [ 6765.798326] res 40/00:00:d8:ab:21/00:00:00:00:00/40 Emask 0x1 (device error) [ 6765.798328] ata1.00: status: { DRDY } [ 6765.798331] ata1.00: failed command: WRITE FPDMA QUEUED [ 6765.798338] ata1.00: cmd 61/80:08:a8:cd:ce/00:00:1c:00:00/40 tag 1 ncq 65536 out [ 6765.798338] res 40/00:00:d8:ab:21/00:00:00:00:00/40 Emask 0x1 (device error) [ 6765.798342] ata1.00: status: { DRDY } [ 6765.798349] ata1: hard resetting link [ 6766.126208] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 6766.127427] ata1.00: configured for UDMA/133 [ 6766.142200] ata1: EH complete [ 6768.693611] ata1.00: exception Emask 0x0 SAct 0x2 SErr 0x0 action 0x0 [ 6768.693617] ata1.00: irq_stat 0x40000008 [ 6768.693622] ata1.00: failed command: READ FPDMA QUEUED [ 6768.693631] ata1.00: cmd 60/08:08:d8:ab:21/00:00:00:00:00/40 tag 1 ncq 4096 in [ 6768.693631] res 41/40:08:d8:ab:21/00:00:00:00:00/00 Emask 0x409 (media error) [ 6768.693636] ata1.00: status: { DRDY ERR } [ 6768.693639] ata1.00: error: { UNC } [ 6768.827132] ata1.00: configured for UDMA/133 [ 6768.827147] sd 0:0:0:0: [sda] Unhandled sense code [ 6768.827151] sd 0:0:0:0: [sda] [ 6768.827153] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 6768.827156] sd 0:0:0:0: [sda] [ 6768.827159] Sense Key : Medium Error [current] [descriptor] [ 6768.827163] Descriptor sense data with sense descriptors (in hex): [ 6768.827165] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 6768.827178] 00 21 ab d8 [ 6768.827185] sd 0:0:0:0: [sda] [ 6768.827189] Add. Sense: Unrecovered read error - auto reallocate failed [ 6768.827192] sd 0:0:0:0: [sda] CDB: [ 6768.827194] Read(10): 28 00 00 21 ab d8 00 00 08 00 [ 6768.827205] end_request: I/O error, dev sda, sector 2206680 [ 6768.827222] ata1: EH complete [ 6771.377879] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 6771.377883] ata1.00: irq_stat 0x40000008 [ 6771.377886] ata1.00: failed command: READ FPDMA QUEUED [ 6771.377891] ata1.00: cmd 60/08:00:d8:ab:21/00:00:00:00:00/40 tag 0 ncq 4096 in [ 6771.377891] res 41/40:08:d8:ab:21/00:00:00:00:00/00 Emask 0x409 (media error) [ 6771.377894] ata1.00: status: { DRDY ERR } [ 6771.377896] ata1.00: error: { UNC } [ 6771.511416] ata1.00: configured for UDMA/133 [ 6771.511431] sd 0:0:0:0: [sda] Unhandled sense code [ 6771.511435] sd 0:0:0:0: [sda] [ 6771.511438] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 6771.511441] sd 0:0:0:0: [sda] [ 6771.511443] Sense Key : Medium Error [current] [descriptor] [ 6771.511447] Descriptor sense data with sense descriptors (in hex): [ 6771.511450] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 6771.511462] 00 21 ab d8 [ 6771.511468] sd 0:0:0:0: [sda] [ 6771.511472] Add. Sense: Unrecovered read error - auto reallocate failed [ 6771.511475] sd 0:0:0:0: [sda] CDB: [ 6771.511476] Read(10): 28 00 00 21 ab d8 00 00 08 00 [ 6771.511486] end_request: I/O error, dev sda, sector 2206680 [ 6771.511506] ata1: EH complete