[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.38-7-generic (buildd@allspice) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-7ubuntu1) ) #39-Ubuntu SMP Fri Mar 25 21:24:57 UTC 2011 (Ubuntu 2.6.38-7.39-generic 2.6.38) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-7-generic root=UUID=c85e594d-288e-4638-8777-629b9ba9fe66 ro quiet splash vt.handoff=7 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable) [ 0.000000] BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bb27c000 (usable) [ 0.000000] BIOS-e820: 00000000bb27c000 - 00000000bb282000 (reserved) [ 0.000000] BIOS-e820: 00000000bb282000 - 00000000bb35f000 (usable) [ 0.000000] BIOS-e820: 00000000bb35f000 - 00000000bb371000 (reserved) [ 0.000000] BIOS-e820: 00000000bb371000 - 00000000bb3f2000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bb3f2000 - 00000000bb40f000 (reserved) [ 0.000000] BIOS-e820: 00000000bb40f000 - 00000000bb46f000 (usable) [ 0.000000] BIOS-e820: 00000000bb46f000 - 00000000bb668000 (reserved) [ 0.000000] BIOS-e820: 00000000bb668000 - 00000000bb6e8000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bb6e8000 - 00000000bb70f000 (reserved) [ 0.000000] BIOS-e820: 00000000bb70f000 - 00000000bb717000 (usable) [ 0.000000] BIOS-e820: 00000000bb717000 - 00000000bb71f000 (reserved) [ 0.000000] BIOS-e820: 00000000bb71f000 - 00000000bb76c000 (usable) [ 0.000000] BIOS-e820: 00000000bb76c000 - 00000000bb778000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bb778000 - 00000000bb77b000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bb77b000 - 00000000bb78b000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bb78b000 - 00000000bb78c000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bb78c000 - 00000000bb79f000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bb79f000 - 00000000bb7ff000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bb7ff000 - 00000000bb800000 (usable) [ 0.000000] BIOS-e820: 00000000bb800000 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000feaff000 - 00000000feb00000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 00000001fc000000 (usable) [ 0.000000] BIOS-e820: 0000000200000000 - 000000023c000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI present. [ 0.000000] DMI: LENOVO 25379WG/25379WG, BIOS 6IET74WW (1.34 ) 10/25/2010 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x23c000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-D3FFF write-protect [ 0.000000] D4000-DBFFF uncachable [ 0.000000] DC000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 disabled [ 0.000000] 1 base 000000000 mask F80000000 write-back [ 0.000000] 2 base 080000000 mask FC0000000 write-back [ 0.000000] 3 base 100000000 mask F00000000 write-back [ 0.000000] 4 base 200000000 mask FC0000000 write-back [ 0.000000] 5 base 23C000000 mask FFC000000 uncachable [ 0.000000] 6 base 0BC000000 mask FFC000000 uncachable [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000bc000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xbb800 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [ffff8800000f68b0] f68b0 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000bb800000 [ 0.000000] 0000000000 - 00bb800000 page 2M [ 0.000000] kernel direct mapping tables up to bb800000 @ 1fffc000-20000000 [ 0.000000] init_memory_mapping: 0000000100000000-000000023c000000 [ 0.000000] 0100000000 - 023c000000 page 2M [ 0.000000] kernel direct mapping tables up to 23c000000 @ bb762000-bb76c000 [ 0.000000] RAMDISK: 366de000 - 37367000 [ 0.000000] ACPI: RSDP 00000000000f6870 00024 (v02 LENOVO) [ 0.000000] ACPI: XSDT 00000000bb7ef320 00094 (v01 LENOVO TP-6I 00001340 LTP 00000000) [ 0.000000] ACPI: FACP 00000000bb7ef400 000F4 (v04 LENOVO TP-6I 00001340 LNVO 00000001) [ 0.000000] ACPI: DSDT 00000000bb7ef7d1 0F310 (v01 LENOVO TP-6I 00001340 MSFT 03000001) [ 0.000000] ACPI: FACS 00000000bb6e7000 00040 [ 0.000000] ACPI: SSDT 00000000bb7ef5b4 0021D (v01 LENOVO TP-6I 00001340 MSFT 03000001) [ 0.000000] ACPI: ECDT 00000000bb7feae1 00052 (v01 LENOVO TP-6I 00001340 LNVO 00000001) [ 0.000000] ACPI: APIC 00000000bb7feb33 00084 (v01 LENOVO TP-6I 00001340 LNVO 00000001) [ 0.000000] ACPI: MCFG 00000000bb7febef 0003C (v01 LENOVO TP-6I 00001340 LNVO 00000001) [ 0.000000] ACPI: HPET 00000000bb7fec2b 00038 (v01 LENOVO TP-6I 00001340 LNVO 00000001) [ 0.000000] ACPI: ASF! 00000000bb7fedbe 000A4 (v16 LENOVO TP-6I 00001340 PTL 00000001) [ 0.000000] ACPI: SLIC 00000000bb7fee62 00176 (v01 LENOVO TP-6I 00001340 LTP 00000000) [ 0.000000] ACPI: BOOT 00000000bb7fefd8 00028 (v01 LENOVO TP-6I 00001340 LTP 00000001) [ 0.000000] ACPI: SSDT 00000000bb6e591a 0084B (v01 LENOVO TP-6I 00001340 INTL 20050513) [ 0.000000] ACPI: TCPA 00000000bb78b000 00032 (v02 PTL CRESTLN 06040000 00005A52) [ 0.000000] ACPI: SSDT 00000000bb77a000 009F1 (v01 PmRef CpuPm 00003000 INTL 20061109) [ 0.000000] ACPI: SSDT 00000000bb779000 00259 (v01 PmRef Cpu0Tst 00003000 INTL 20061109) [ 0.000000] ACPI: SSDT 00000000bb778000 0049F (v01 PmRef ApTst 00003000 INTL 20061109) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000023c000000 [ 0.000000] Initmem setup node 0 0000000000000000-000000023c000000 [ 0.000000] NODE_DATA [00000001fbffb000 - 00000001fbffffff] [ 0.000000] [ffffea0000000000-ffffea0007dfffff] PMD -> [ffff8801f3e00000-ffff8801fadfffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x0023c000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[9] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009e [ 0.000000] 0: 0x00000100 -> 0x000bb27c [ 0.000000] 0: 0x000bb282 -> 0x000bb35f [ 0.000000] 0: 0x000bb40f -> 0x000bb46f [ 0.000000] 0: 0x000bb70f -> 0x000bb717 [ 0.000000] 0: 0x000bb71f -> 0x000bb76c [ 0.000000] 0: 0x000bb7ff -> 0x000bb800 [ 0.000000] 0: 0x00100000 -> 0x001fc000 [ 0.000000] 0: 0x00200000 -> 0x0023c000 [ 0.000000] On node 0 totalpages: 2044829 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 6 pages reserved [ 0.000000] DMA zone: 3920 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 748615 pages, LIFO batch:31 [ 0.000000] Normal zone: 17696 pages used for memmap [ 0.000000] Normal zone: 1260256 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000 [ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000 [ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000 [ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000bb27c000 - 00000000bb282000 [ 0.000000] PM: Registered nosave memory: 00000000bb35f000 - 00000000bb371000 [ 0.000000] PM: Registered nosave memory: 00000000bb371000 - 00000000bb3f2000 [ 0.000000] PM: Registered nosave memory: 00000000bb3f2000 - 00000000bb40f000 [ 0.000000] PM: Registered nosave memory: 00000000bb46f000 - 00000000bb668000 [ 0.000000] PM: Registered nosave memory: 00000000bb668000 - 00000000bb6e8000 [ 0.000000] PM: Registered nosave memory: 00000000bb6e8000 - 00000000bb70f000 [ 0.000000] PM: Registered nosave memory: 00000000bb717000 - 00000000bb71f000 [ 0.000000] PM: Registered nosave memory: 00000000bb76c000 - 00000000bb778000 [ 0.000000] PM: Registered nosave memory: 00000000bb778000 - 00000000bb77b000 [ 0.000000] PM: Registered nosave memory: 00000000bb77b000 - 00000000bb78b000 [ 0.000000] PM: Registered nosave memory: 00000000bb78b000 - 00000000bb78c000 [ 0.000000] PM: Registered nosave memory: 00000000bb78c000 - 00000000bb79f000 [ 0.000000] PM: Registered nosave memory: 00000000bb79f000 - 00000000bb7ff000 [ 0.000000] PM: Registered nosave memory: 00000000bb800000 - 00000000c0000000 [ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000feaff000 [ 0.000000] PM: Registered nosave memory: 00000000feaff000 - 00000000feb00000 [ 0.000000] PM: Registered nosave memory: 00000000feb00000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000 [ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fed00000 [ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed1c000 [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed90000 [ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000 [ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000 [ 0.000000] PM: Registered nosave memory: 00000001fc000000 - 0000000200000000 [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff8800bb000000 s83840 r8192 d22656 u524288 [ 0.000000] pcpu-alloc: s83840 r8192 d22656 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2012791 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-7-generic root=UUID=c85e594d-288e-4638-8777-629b9ba9fe66 ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 7971776k/9371648k available (5934k kernel code, 1192332k absent, 207540k reserved, 5015k data, 956k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] NR_IRQS:4352 nr_irqs:712 16 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 83886080 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.010000] Detected 2659.962 MHz processor. [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5319.92 BogoMIPS (lpj=26599620) [ 0.000006] pid_max: default: 32768 minimum: 301 [ 0.000026] Security Framework initialized [ 0.000038] AppArmor: AppArmor initialized [ 0.000039] Yama: becoming mindful. [ 0.000595] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.002447] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.003249] Mount-cache hash table entries: 256 [ 0.003352] Initializing cgroup subsys ns [ 0.003355] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup. [ 0.003357] Initializing cgroup subsys cpuacct [ 0.003360] Initializing cgroup subsys memory [ 0.003365] Initializing cgroup subsys devices [ 0.003367] Initializing cgroup subsys freezer [ 0.003369] Initializing cgroup subsys net_cls [ 0.003370] Initializing cgroup subsys blkio [ 0.003394] CPU: Physical Processor ID: 0 [ 0.003395] CPU: Processor Core ID: 0 [ 0.003401] mce: CPU supports 9 MCE banks [ 0.003410] CPU0: Thermal monitoring enabled (TM1) [ 0.003417] using mwait in idle threads. [ 0.005112] ACPI: Core revision 20110112 [ 0.020778] ftrace: allocating 24319 entries in 96 pages [ 0.027159] Setting APIC routing to flat [ 0.027557] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.127312] CPU0: Intel(R) Core(TM) i5 CPU M 580 @ 2.67GHz stepping 05 [ 0.244119] Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver. [ 0.244126] ... version: 3 [ 0.244126] ... bit width: 48 [ 0.244127] ... generic registers: 4 [ 0.244128] ... value mask: 0000ffffffffffff [ 0.244129] ... max period: 000000007fffffff [ 0.244130] ... fixed-purpose events: 3 [ 0.244131] ... event mask: 000000070000000f [ 0.244508] Booting Node 0, Processors #1 #2 #3 Ok. [ 0.782870] Brought up 4 CPUs [ 0.782873] Total of 4 processors activated (21279.82 BogoMIPS). [ 0.784473] devtmpfs: initialized [ 0.785247] print_constraints: dummy: [ 0.785275] Time: 10:49:33 Date: 03/30/11 [ 0.785301] NET: Registered protocol family 16 [ 0.785386] Trying to unpack rootfs image as initramfs... [ 0.785388] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.785390] ACPI: bus type pci registered [ 0.785453] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.785455] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.838772] PCI: Using configuration type 1 for base access [ 0.839391] bio: create slab at 0 [ 0.840955] ACPI: EC: EC description table is found, configuring boot EC [ 0.845118] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.956233] ACPI: SSDT 00000000bb71a598 004F3 (v01 PmRef Cpu0Ist 00003000 INTL 20061109) [ 0.956776] ACPI: Dynamic OEM Table Load: [ 0.956780] ACPI: SSDT (null) 004F3 (v01 PmRef Cpu0Ist 00003000 INTL 20061109) [ 0.956961] ACPI: SSDT 00000000bb718718 006B2 (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.957524] ACPI: Dynamic OEM Table Load: [ 0.957527] ACPI: SSDT (null) 006B2 (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 1.035871] Freeing initrd memory: 12836k freed [ 1.062427] ACPI: SSDT 00000000bb719a98 00303 (v01 PmRef ApIst 00003000 INTL 20061109) [ 1.062819] ACPI: Dynamic OEM Table Load: [ 1.062821] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20061109) [ 1.092176] ACPI: SSDT 00000000bb717d98 00119 (v01 PmRef ApCst 00003000 INTL 20061109) [ 1.092530] ACPI: Dynamic OEM Table Load: [ 1.092532] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20061109) [ 1.123471] ACPI: Interpreter enabled [ 1.123474] ACPI: (supports S0 S3 S4 S5) [ 1.123492] ACPI: Using IOAPIC for interrupt routing [ 1.128327] ACPI: Power Resource [PUBS] (on) [ 1.132207] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62 [ 1.192602] ACPI: ACPI Dock Station Driver: 2 docks/bays found [ 1.192604] HEST: Table not found. [ 1.192607] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.192618] ACPI: PCI Root Bridge [UNCR] (domain 0000 [bus ff]) [ 1.192653] pci 0000:ff:00.0: [8086:2c62] type 0 class 0x000600 [ 1.192673] pci 0000:ff:00.1: [8086:2d01] type 0 class 0x000600 [ 1.192689] pci 0000:ff:02.0: [8086:2d10] type 0 class 0x000600 [ 1.192703] pci 0000:ff:02.1: [8086:2d11] type 0 class 0x000600 [ 1.192716] pci 0000:ff:02.2: [8086:2d12] type 0 class 0x000600 [ 1.192730] pci 0000:ff:02.3: [8086:2d13] type 0 class 0x000600 [ 1.192980] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 1.193018] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 1.193020] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 1.193021] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 1.193023] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] [ 1.193025] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] [ 1.193026] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff] [ 1.193034] pci 0000:00:00.0: [8086:0044] type 0 class 0x000600 [ 1.193047] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics [ 1.193062] pci 0000:00:02.0: [8086:0046] type 0 class 0x000300 [ 1.193071] pci 0000:00:02.0: reg 10: [mem 0xf2000000-0xf23fffff 64bit] [ 1.193076] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref] [ 1.193080] pci 0000:00:02.0: reg 20: [io 0x1800-0x1807] [ 1.193136] pci 0000:00:16.0: [8086:3b64] type 0 class 0x000780 [ 1.193163] pci 0000:00:16.0: reg 10: [mem 0xf2827800-0xf282780f 64bit] [ 1.193239] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 1.193243] pci 0000:00:16.0: PME# disabled [ 1.193280] pci 0000:00:19.0: [8086:10ea] type 0 class 0x000200 [ 1.193305] pci 0000:00:19.0: reg 10: [mem 0xf2600000-0xf261ffff] [ 1.193316] pci 0000:00:19.0: reg 14: [mem 0xf2625000-0xf2625fff] [ 1.193327] pci 0000:00:19.0: reg 18: [io 0x1820-0x183f] [ 1.193392] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 1.193397] pci 0000:00:19.0: PME# disabled [ 1.193426] pci 0000:00:1a.0: [8086:3b3c] type 0 class 0x000c03 [ 1.193450] pci 0000:00:1a.0: reg 10: [mem 0xf2828000-0xf28283ff] [ 1.193536] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 1.193540] pci 0000:00:1a.0: PME# disabled [ 1.193568] pci 0000:00:1b.0: [8086:3b56] type 0 class 0x000403 [ 1.193587] pci 0000:00:1b.0: reg 10: [mem 0xf2620000-0xf2623fff 64bit] [ 1.193662] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 1.193666] pci 0000:00:1b.0: PME# disabled [ 1.193692] pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604 [ 1.193767] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 1.193772] pci 0000:00:1c.0: PME# disabled [ 1.193798] pci 0000:00:1c.1: [8086:3b44] type 1 class 0x000604 [ 1.193873] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 1.193877] pci 0000:00:1c.1: PME# disabled [ 1.193906] pci 0000:00:1c.3: [8086:3b48] type 1 class 0x000604 [ 1.193982] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 1.193986] pci 0000:00:1c.3: PME# disabled [ 1.194012] pci 0000:00:1c.4: [8086:3b4a] type 1 class 0x000604 [ 1.194088] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 1.194092] pci 0000:00:1c.4: PME# disabled [ 1.194130] pci 0000:00:1d.0: [8086:3b34] type 0 class 0x000c03 [ 1.194153] pci 0000:00:1d.0: reg 10: [mem 0xf2828400-0xf28287ff] [ 1.194239] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 1.194244] pci 0000:00:1d.0: PME# disabled [ 1.194267] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604 [ 1.194340] pci 0000:00:1f.0: [8086:3b07] type 0 class 0x000601 [ 1.194455] pci 0000:00:1f.2: [8086:3b2f] type 0 class 0x000106 [ 1.194480] pci 0000:00:1f.2: reg 10: [io 0x1860-0x1867] [ 1.194491] pci 0000:00:1f.2: reg 14: [io 0x1814-0x1817] [ 1.194501] pci 0000:00:1f.2: reg 18: [io 0x1818-0x181f] [ 1.194511] pci 0000:00:1f.2: reg 1c: [io 0x1810-0x1813] [ 1.194521] pci 0000:00:1f.2: reg 20: [io 0x1840-0x185f] [ 1.194532] pci 0000:00:1f.2: reg 24: [mem 0xf2827000-0xf28277ff] [ 1.194577] pci 0000:00:1f.2: PME# supported from D3hot [ 1.194581] pci 0000:00:1f.2: PME# disabled [ 1.194602] pci 0000:00:1f.3: [8086:3b30] type 0 class 0x000c05 [ 1.194622] pci 0000:00:1f.3: reg 10: [mem 0xf2828800-0xf28288ff 64bit] [ 1.194651] pci 0000:00:1f.3: reg 20: [io 0x1880-0x189f] [ 1.194697] pci 0000:00:1f.6: [8086:3b32] type 0 class 0x001180 [ 1.194724] pci 0000:00:1f.6: reg 10: [mem 0xf2626000-0xf2626fff 64bit] [ 1.194857] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 1.194861] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled) [ 1.194866] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 1.194873] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 1.195024] pci 0000:03:00.0: [8086:4239] type 0 class 0x000280 [ 1.195082] pci 0000:03:00.0: reg 10: [mem 0xf2400000-0xf2401fff 64bit] [ 1.195259] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 1.195292] pci 0000:03:00.0: PME# disabled [ 1.195391] pci 0000:00:1c.1: PCI bridge to [bus 03-03] [ 1.195396] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled) [ 1.195400] pci 0000:00:1c.1: bridge window [mem 0xf2400000-0xf24fffff] [ 1.195407] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 1.195461] pci 0000:00:1c.3: PCI bridge to [bus 05-0c] [ 1.195465] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] [ 1.195470] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf1ffffff] [ 1.195477] pci 0000:00:1c.3: bridge window [mem 0xf2900000-0xf29fffff 64bit pref] [ 1.195600] pci 0000:0d:00.0: [1180:e822] type 0 class 0x000805 [ 1.195622] pci 0000:0d:00.0: reg 10: [mem 0xf2500000-0xf25000ff] [ 1.195755] pci 0000:0d:00.0: supports D1 D2 [ 1.195756] pci 0000:0d:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.195762] pci 0000:0d:00.0: PME# disabled [ 1.195813] pci 0000:0d:00.1: [1180:e230] type 0 class 0x000880 [ 1.195835] pci 0000:0d:00.1: reg 10: [mem 0xf2500400-0xf25004ff] [ 1.195967] pci 0000:0d:00.1: supports D1 D2 [ 1.195968] pci 0000:0d:00.1: PME# supported from D0 D1 D2 D3hot D3cold [ 1.195973] pci 0000:0d:00.1: PME# disabled [ 1.196019] pci 0000:0d:00.3: [1180:e832] type 0 class 0x000c00 [ 1.196042] pci 0000:0d:00.3: reg 10: [mem 0xf2500800-0xf2500fff] [ 1.196174] pci 0000:0d:00.3: supports D1 D2 [ 1.196175] pci 0000:0d:00.3: PME# supported from D0 D1 D2 D3hot D3cold [ 1.196180] pci 0000:0d:00.3: PME# disabled [ 1.196248] pci 0000:00:1c.4: PCI bridge to [bus 0d-0d] [ 1.196252] pci 0000:00:1c.4: bridge window [io 0xf000-0x0000] (disabled) [ 1.196256] pci 0000:00:1c.4: bridge window [mem 0xf2500000-0xf25fffff] [ 1.196263] pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 1.196333] pci 0000:00:1e.0: PCI bridge to [bus 0e-0e] (subtractive decode) [ 1.196337] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled) [ 1.196342] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 1.196348] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 1.196350] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 1.196352] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 1.196354] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 1.196355] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode) [ 1.196357] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode) [ 1.196358] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode) [ 1.196389] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 1.196475] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] [ 1.196497] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT] [ 1.196519] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT] [ 1.196543] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP5._PRT] [ 1.198773] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) [ 1.198822] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) [ 1.198861] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 1.198909] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) [ 1.198955] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) [ 1.199002] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) [ 1.199040] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 1.199088] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) [ 1.199176] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 1.199182] vgaarb: loaded [ 1.199308] SCSI subsystem initialized [ 1.199358] libata version 3.00 loaded. [ 1.199398] usbcore: registered new interface driver usbfs [ 1.199404] usbcore: registered new interface driver hub [ 1.199421] usbcore: registered new device driver usb [ 1.199808] wmi: Mapper loaded [ 1.199810] PCI: Using ACPI for IRQ routing [ 1.199812] PCI: pci_cache_line_size set to 64 bytes [ 1.199897] reserve RAM buffer: 000000000009e800 - 000000000009ffff [ 1.199898] reserve RAM buffer: 00000000bb27c000 - 00000000bbffffff [ 1.199902] reserve RAM buffer: 00000000bb35f000 - 00000000bbffffff [ 1.199905] reserve RAM buffer: 00000000bb46f000 - 00000000bbffffff [ 1.199908] reserve RAM buffer: 00000000bb717000 - 00000000bbffffff [ 1.199910] reserve RAM buffer: 00000000bb76c000 - 00000000bbffffff [ 1.199912] reserve RAM buffer: 00000000bb800000 - 00000000bbffffff [ 1.199985] NetLabel: Initializing [ 1.199986] NetLabel: domain hash size = 128 [ 1.199987] NetLabel: protocols = UNLABELED CIPSOv4 [ 1.199999] NetLabel: unlabeled traffic allowed by default [ 1.200032] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 1.200036] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 1.202050] Switching to clocksource hpet [ 1.206715] AppArmor: AppArmor Filesystem Enabled [ 1.206743] pnp: PnP ACPI init [ 1.206759] ACPI: bus type pnp registered [ 1.208089] pnp 00:00: [mem 0x00000000-0x0009ffff] [ 1.208090] pnp 00:00: [mem 0x000c0000-0x000c3fff] [ 1.208092] pnp 00:00: [mem 0x000c4000-0x000c7fff] [ 1.208093] pnp 00:00: [mem 0x000c8000-0x000cbfff] [ 1.208094] pnp 00:00: [mem 0x000cc000-0x000cffff] [ 1.208095] pnp 00:00: [mem 0x000d0000-0x000d3fff] [ 1.208097] pnp 00:00: [mem 0x000d4000-0x000d3fff disabled] [ 1.208098] pnp 00:00: [mem 0x000d8000-0x000d7fff disabled] [ 1.208099] pnp 00:00: [mem 0x000dc000-0x000dffff] [ 1.208101] pnp 00:00: [mem 0x000e0000-0x000e3fff] [ 1.208102] pnp 00:00: [mem 0x000e4000-0x000e7fff] [ 1.208103] pnp 00:00: [mem 0x000e8000-0x000ebfff] [ 1.208104] pnp 00:00: [mem 0x000ec000-0x000effff] [ 1.208105] pnp 00:00: [mem 0x000f0000-0x000fffff] [ 1.208107] pnp 00:00: [mem 0x00100000-0xbfffffff] [ 1.208108] pnp 00:00: [mem 0xfec00000-0xfed3ffff] [ 1.208109] pnp 00:00: [mem 0xfed4c000-0xffffffff] [ 1.208173] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved [ 1.208176] system 00:00: [mem 0x000c0000-0x000c3fff] has been reserved [ 1.208177] system 00:00: [mem 0x000c4000-0x000c7fff] has been reserved [ 1.208179] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved [ 1.208181] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved [ 1.208182] system 00:00: [mem 0x000d0000-0x000d3fff] could not be reserved [ 1.208184] system 00:00: [mem 0x000dc000-0x000dffff] could not be reserved [ 1.208186] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved [ 1.208188] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved [ 1.208189] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved [ 1.208191] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved [ 1.208193] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved [ 1.208194] system 00:00: [mem 0x00100000-0xbfffffff] could not be reserved [ 1.208197] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved [ 1.208199] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved [ 1.208202] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 1.208212] pnp 00:01: [bus ff] [ 1.208272] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active) [ 1.208285] pnp 00:02: [bus 00-fe] [ 1.208286] pnp 00:02: [io 0x0cf8-0x0cff] [ 1.208288] pnp 00:02: [io 0x0000-0x0cf7 window] [ 1.208289] pnp 00:02: [io 0x0d00-0xffff window] [ 1.208291] pnp 00:02: [mem 0x000a0000-0x000bffff window] [ 1.208292] pnp 00:02: [mem 0x000c0000-0x000c3fff window] [ 1.208294] pnp 00:02: [mem 0x000c4000-0x000c7fff window] [ 1.208295] pnp 00:02: [mem 0x000c8000-0x000cbfff window] [ 1.208296] pnp 00:02: [mem 0x000cc000-0x000cffff window] [ 1.208298] pnp 00:02: [mem 0x000d0000-0x000d3fff window] [ 1.208299] pnp 00:02: [mem 0x000d4000-0x000d7fff window] [ 1.208300] pnp 00:02: [mem 0x000d8000-0x000dbfff window] [ 1.208302] pnp 00:02: [mem 0x000dc000-0x000dffff window] [ 1.208303] pnp 00:02: [mem 0x000e0000-0x000e3fff window] [ 1.208304] pnp 00:02: [mem 0x000e4000-0x000e7fff window] [ 1.208306] pnp 00:02: [mem 0x000e8000-0x000ebfff window] [ 1.208307] pnp 00:02: [mem 0x000ec000-0x000effff window] [ 1.208310] pnp 00:02: [mem 0xc0000000-0xfebfffff window] [ 1.208311] pnp 00:02: [mem 0xfed40000-0xfed4bfff window] [ 1.208340] pnp 00:02: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 1.208583] pnp 00:03: [io 0x0010-0x001f] [ 1.208584] pnp 00:03: [io 0x0090-0x009f] [ 1.208585] pnp 00:03: [io 0x0024-0x0025] [ 1.208586] pnp 00:03: [io 0x0028-0x0029] [ 1.208587] pnp 00:03: [io 0x002c-0x002d] [ 1.208588] pnp 00:03: [io 0x0030-0x0031] [ 1.208590] pnp 00:03: [io 0x0034-0x0035] [ 1.208591] pnp 00:03: [io 0x0038-0x0039] [ 1.208592] pnp 00:03: [io 0x003c-0x003d] [ 1.208593] pnp 00:03: [io 0x00a4-0x00a5] [ 1.208594] pnp 00:03: [io 0x00a8-0x00a9] [ 1.208595] pnp 00:03: [io 0x00ac-0x00ad] [ 1.208596] pnp 00:03: [io 0x00b0-0x00b5] [ 1.208597] pnp 00:03: [io 0x00b8-0x00b9] [ 1.208599] pnp 00:03: [io 0x00bc-0x00bd] [ 1.208600] pnp 00:03: [io 0x0050-0x0053] [ 1.208601] pnp 00:03: [io 0x0072-0x0077] [ 1.208602] pnp 00:03: [io 0x164e-0x164f] [ 1.208603] pnp 00:03: [io 0x002e-0x002f] [ 1.208604] pnp 00:03: [io 0x1000-0x107f] [ 1.208605] pnp 00:03: [io 0x1180-0x11ff] [ 1.208607] pnp 00:03: [io 0x0800-0x080f] [ 1.208608] pnp 00:03: [io 0x15e0-0x15ef] [ 1.208609] pnp 00:03: [io 0x1600-0x1641] [ 1.208610] pnp 00:03: [io 0x1644-0x167f] [ 1.208611] pnp 00:03: [mem 0xe0000000-0xefffffff] [ 1.208612] pnp 00:03: [mem 0xfeaff000-0xfeafffff] [ 1.208614] pnp 00:03: [mem 0xfed1c000-0xfed1ffff] [ 1.208615] pnp 00:03: [mem 0xfed10000-0xfed13fff] [ 1.208616] pnp 00:03: [mem 0xfed18000-0xfed18fff] [ 1.208617] pnp 00:03: [mem 0xfed19000-0xfed19fff] [ 1.208619] pnp 00:03: [mem 0xfed45000-0xfed4bfff] [ 1.208672] system 00:03: [io 0x164e-0x164f] has been reserved [ 1.208674] system 00:03: [io 0x1000-0x107f] has been reserved [ 1.208676] system 00:03: [io 0x1180-0x11ff] has been reserved [ 1.208678] system 00:03: [io 0x0800-0x080f] has been reserved [ 1.208680] system 00:03: [io 0x15e0-0x15ef] has been reserved [ 1.208681] system 00:03: [io 0x1600-0x1641] has been reserved [ 1.208683] system 00:03: [io 0x1644-0x167f] could not be reserved [ 1.208685] system 00:03: [mem 0xe0000000-0xefffffff] has been reserved [ 1.208687] system 00:03: [mem 0xfeaff000-0xfeafffff] has been reserved [ 1.208689] system 00:03: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 1.208690] system 00:03: [mem 0xfed10000-0xfed13fff] has been reserved [ 1.208692] system 00:03: [mem 0xfed18000-0xfed18fff] has been reserved [ 1.208694] system 00:03: [mem 0xfed19000-0xfed19fff] has been reserved [ 1.208696] system 00:03: [mem 0xfed45000-0xfed4bfff] has been reserved [ 1.208698] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.208720] pnp 00:04: [mem 0xfed00000-0xfed003ff] [ 1.208744] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active) [ 1.208752] pnp 00:05: [io 0x0000-0x000f] [ 1.208753] pnp 00:05: [io 0x0080-0x008f] [ 1.208755] pnp 00:05: [io 0x00c0-0x00df] [ 1.208757] pnp 00:05: [dma 4] [ 1.208775] pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active) [ 1.208781] pnp 00:06: [io 0x0061] [ 1.208801] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active) [ 1.208807] pnp 00:07: [io 0x00f0] [ 1.208817] pnp 00:07: [irq 13] [ 1.208836] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active) [ 1.208843] pnp 00:08: [io 0x0070-0x0071] [ 1.208848] pnp 00:08: [irq 8] [ 1.208868] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active) [ 1.208874] pnp 00:09: [io 0x0060] [ 1.208875] pnp 00:09: [io 0x0064] [ 1.208880] pnp 00:09: [irq 1] [ 1.208899] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 (active) [ 1.208908] pnp 00:0a: [irq 12] [ 1.208929] pnp 00:0a: Plug and Play ACPI device, IDs LEN0015 PNP0f13 (active) [ 1.209184] pnp 00:0b: [mem 0xfed40000-0xfed44fff] [ 1.209207] pnp 00:0b: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active) [ 1.210063] pnp: PnP ACPI: found 12 devices [ 1.210064] ACPI: ACPI bus type pnp unregistered [ 1.211698] Switched to NOHz mode on CPU #0 [ 1.211754] Switched to NOHz mode on CPU #2 [ 1.211788] Switched to NOHz mode on CPU #3 [ 1.211794] Switched to NOHz mode on CPU #1 [ 1.215706] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 1.215708] pci 0000:00:1c.0: bridge window [io disabled] [ 1.215713] pci 0000:00:1c.0: bridge window [mem disabled] [ 1.215717] pci 0000:00:1c.0: bridge window [mem pref disabled] [ 1.215724] pci 0000:00:1c.1: PCI bridge to [bus 03-03] [ 1.215725] pci 0000:00:1c.1: bridge window [io disabled] [ 1.215731] pci 0000:00:1c.1: bridge window [mem 0xf2400000-0xf24fffff] [ 1.215736] pci 0000:00:1c.1: bridge window [mem pref disabled] [ 1.215742] pci 0000:00:1c.3: PCI bridge to [bus 05-0c] [ 1.215745] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] [ 1.215751] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf1ffffff] [ 1.215755] pci 0000:00:1c.3: bridge window [mem 0xf2900000-0xf29fffff 64bit pref] [ 1.215763] pci 0000:00:1c.4: PCI bridge to [bus 0d-0d] [ 1.215764] pci 0000:00:1c.4: bridge window [io disabled] [ 1.215769] pci 0000:00:1c.4: bridge window [mem 0xf2500000-0xf25fffff] [ 1.215774] pci 0000:00:1c.4: bridge window [mem pref disabled] [ 1.215781] pci 0000:00:1e.0: PCI bridge to [bus 0e-0e] [ 1.215782] pci 0000:00:1e.0: bridge window [io disabled] [ 1.215787] pci 0000:00:1e.0: bridge window [mem disabled] [ 1.215791] pci 0000:00:1e.0: bridge window [mem pref disabled] [ 1.215810] pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.215815] pci 0000:00:1c.0: setting latency timer to 64 [ 1.215824] pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 1.215828] pci 0000:00:1c.1: setting latency timer to 64 [ 1.215837] pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 1.215841] pci 0000:00:1c.3: setting latency timer to 64 [ 1.215848] pci 0000:00:1c.4: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.215852] pci 0000:00:1c.4: setting latency timer to 64 [ 1.215860] pci 0000:00:1e.0: setting latency timer to 64 [ 1.215864] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 1.215865] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 1.215866] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 1.215868] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff] [ 1.215869] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff] [ 1.215871] pci_bus 0000:00: resource 9 [mem 0xc0000000-0xfebfffff] [ 1.215872] pci_bus 0000:03: resource 1 [mem 0xf2400000-0xf24fffff] [ 1.215874] pci_bus 0000:05: resource 0 [io 0x2000-0x2fff] [ 1.215875] pci_bus 0000:05: resource 1 [mem 0xf0000000-0xf1ffffff] [ 1.215877] pci_bus 0000:05: resource 2 [mem 0xf2900000-0xf29fffff 64bit pref] [ 1.215879] pci_bus 0000:0d: resource 1 [mem 0xf2500000-0xf25fffff] [ 1.215880] pci_bus 0000:0e: resource 4 [io 0x0000-0x0cf7] [ 1.215882] pci_bus 0000:0e: resource 5 [io 0x0d00-0xffff] [ 1.215883] pci_bus 0000:0e: resource 6 [mem 0x000a0000-0x000bffff] [ 1.215884] pci_bus 0000:0e: resource 7 [mem 0x000d4000-0x000d7fff] [ 1.215886] pci_bus 0000:0e: resource 8 [mem 0x000d8000-0x000dbfff] [ 1.215887] pci_bus 0000:0e: resource 9 [mem 0xc0000000-0xfebfffff] [ 1.215912] NET: Registered protocol family 2 [ 1.216085] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 1.216985] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 1.218618] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.218825] TCP: Hash tables configured (established 524288 bind 65536) [ 1.218827] TCP reno registered [ 1.218839] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 1.218874] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 1.218976] NET: Registered protocol family 1 [ 1.218999] pci 0000:00:02.0: Boot video device [ 1.219115] PCI: CLS 64 bytes, default 64 [ 1.219117] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.219119] Placing 64MB software IO TLB between ffff8800b6e7a000 - ffff8800bae7a000 [ 1.219120] software IO TLB at phys 0xb6e7a000 - 0xbae7a000 [ 1.219156] Simple Boot Flag at 0x35 set to 0x1 [ 1.219518] audit: initializing netlink socket (disabled) [ 1.219526] type=2000 audit(1301482174.010:1): initialized [ 1.229565] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.230802] VFS: Disk quotas dquot_6.5.2 [ 1.230840] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.231283] fuse init (API version 7.16) [ 1.231342] msgmni has been set to 15594 [ 1.231526] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.231549] io scheduler noop registered [ 1.231552] io scheduler deadline registered [ 1.231580] io scheduler cfq registered (default) [ 1.231877] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.231893] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.231923] intel_idle: MWAIT substates: 0x1120 [ 1.231925] intel_idle: v0.4 model 0x25 [ 1.231926] intel_idle: lapic_timer_reliable_states 0xffffffff [ 1.232368] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 1.232704] ACPI: AC Adapter [AC] (on-line) [ 1.232785] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 [ 1.351712] ACPI: Lid Switch [LID] [ 1.351790] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1 [ 1.451473] ACPI: Sleep Button [SLPB] [ 1.451556] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 1.451558] ACPI: Power Button [PWRF] [ 1.451655] ACPI: acpi_idle yielding to intel_idle [ 1.458871] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.458873] ACPI: Thermal Zone [THM0] (53 C) [ 1.458888] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 1.458920] ERST: Table is not found! [ 1.458980] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.475205] ACPI: Battery Slot [BAT0] (battery present) [ 1.492846] Linux agpgart interface v0.103 [ 1.492909] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset [ 1.493048] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable [ 1.493934] agpgart-intel 0000:00:00.0: detected 32768K stolen memory [ 1.494072] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 1.494823] brd: module loaded [ 1.495145] loop: module loaded [ 1.495218] i2c-core: driver [adp5520] using legacy suspend method [ 1.495220] i2c-core: driver [adp5520] using legacy resume method [ 1.495494] Fixed MDIO Bus: probed [ 1.495512] PPP generic driver version 2.4.2 [ 1.495539] tun: Universal TUN/TAP device driver, 1.6 [ 1.495540] tun: (C) 1999-2004 Max Krasnyansky [ 1.495589] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.495607] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 1.495611] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 1.495619] ehci_hcd 0000:00:1a.0: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 1.495637] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 1.495641] ehci_hcd 0000:00:1a.0: EHCI Host Controller [ 1.495670] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.495733] ehci_hcd 0000:00:1a.0: debug port 2 [ 1.499624] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported [ 1.499642] ehci_hcd 0000:00:1a.0: irq 23, io mem 0xf2828000 [ 1.521281] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.521416] hub 1-0:1.0: USB hub found [ 1.521419] hub 1-0:1.0: 3 ports detected [ 1.521475] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 1.521478] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 1.521490] ehci_hcd 0000:00:1d.0: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 1.521502] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.521506] ehci_hcd 0000:00:1d.0: EHCI Host Controller [ 1.521533] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.521580] ehci_hcd 0000:00:1d.0: debug port 2 [ 1.525468] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported [ 1.525479] ehci_hcd 0000:00:1d.0: irq 19, io mem 0xf2828400 [ 1.541233] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.541352] hub 2-0:1.0: USB hub found [ 1.541355] hub 2-0:1.0: 3 ports detected [ 1.541401] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.541409] uhci_hcd: USB Universal Host Controller Interface driver [ 1.541478] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 1.544398] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.544404] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.544509] mousedev: PS/2 mouse device common for all mice [ 1.544604] rtc_cmos 00:08: RTC can wake from S4 [ 1.544662] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0 [ 1.544692] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.544757] device-mapper: uevent: version 1.0.3 [ 1.544809] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com [ 1.544863] device-mapper: multipath: version 1.2.0 loaded [ 1.544865] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1.545019] cpuidle: using governor ladder [ 1.545125] cpuidle: using governor menu [ 1.545290] TCP cubic registered [ 1.545368] NET: Registered protocol family 10 [ 1.545703] NET: Registered protocol family 17 [ 1.545714] Registering the dns_resolver key type [ 1.549007] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 1.551353] PM: Hibernation image not present or could not be loaded. [ 1.551362] registered taskstats version 1 [ 1.551672] Magic number: 3:84:832 [ 1.551814] rtc_cmos 00:08: setting system clock to 2011-03-30 10:49:34 UTC (1301482174) [ 1.551816] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.551817] EDD information not available. [ 1.553244] Freeing unused kernel memory: 956k freed [ 1.553378] Write protecting the kernel read-only data: 10240k [ 1.554177] Freeing unused kernel memory: 192k freed [ 1.558160] Freeing unused kernel memory: 1444k freed [ 1.574193] udev[71]: starting version 167 [ 1.599210] sdhci: Secure Digital Host Controller Interface driver [ 1.599213] sdhci: Copyright(c) Pierre Ossman [ 1.628207] ahci 0000:00:1f.2: version 3.0 [ 1.628236] ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 1.628299] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X [ 1.628340] ahci: SSS flag set, parallel bus scan disabled [ 1.628391] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x33 impl SATA mode [ 1.628395] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pmp pio slum part ems sxs apst [ 1.628401] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.629012] firewire_ohci 0000:0d:00.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 1.629020] firewire_ohci 0000:0d:00.3: setting latency timer to 64 [ 1.634409] e1000e: Intel(R) PRO/1000 Network Driver - 1.2.20-k2 [ 1.634412] e1000e: Copyright(c) 1999 - 2011 Intel Corporation. [ 1.681636] scsi0 : ahci [ 1.681828] scsi1 : ahci [ 1.682032] scsi2 : ahci [ 1.682280] scsi3 : ahci [ 1.682559] scsi4 : ahci [ 1.682772] scsi5 : ahci [ 1.683141] ata1: SATA max UDMA/133 abar m2048@0xf2827000 port 0xf2827100 irq 40 [ 1.683144] ata2: SATA max UDMA/133 abar m2048@0xf2827000 port 0xf2827180 irq 40 [ 1.683145] ata3: DUMMY [ 1.683146] ata4: DUMMY [ 1.683149] ata5: SATA max UDMA/133 abar m2048@0xf2827000 port 0xf2827300 irq 40 [ 1.683152] ata6: SATA max UDMA/133 abar m2048@0xf2827000 port 0xf2827380 irq 40 [ 1.683191] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.683206] e1000e 0000:00:19.0: setting latency timer to 64 [ 1.683387] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X [ 1.701043] firewire_ohci 0000:0d:00.3: irq 42 for MSI/MSI-X [ 1.701078] firewire_ohci: Added fw-ohci device 0000:0d:00.3, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x1 [ 1.701162] sdhci-pci 0000:0d:00.0: SDHCI controller found [1180:e822] (rev 1) [ 1.701185] sdhci-pci 0000:0d:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.701224] sdhci-pci 0000:0d:00.0: Will use DMA mode even though HW doesn't fully claim to support it. [ 1.701233] sdhci-pci 0000:0d:00.0: setting latency timer to 64 [ 1.701249] mmc0: no vmmc regulator found [ 1.701279] Registered led device: mmc0:: [ 1.701315] mmc0: SDHCI controller on PCI [0000:0d:00.0] using DMA [ 1.850575] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 1.897755] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) f0:de:f1:3f:20:56 [ 1.897757] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection [ 1.897823] e1000e 0000:00:19.0: eth0: MAC: 9, PHY: 10, PBA No: A002FF-0FF [ 2.000796] hub 1-1:1.0: USB hub found [ 2.000852] hub 1-1:1.0: 6 ports detected [ 2.119902] usb 2-1: new high speed USB device using ehci_hcd and address 2 [ 2.199745] firewire_core: created device fw0: GUID f0def1ff3f2056ff, S400 [ 2.209640] Refined TSC clocksource calibration: 2659.999 MHz. [ 2.209645] Switching to clocksource tsc [ 2.229581] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.230078] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 2.230084] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 2.230089] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 2.230427] ata1.00: ATA-7: INTEL SSDSA1M160G2LE, 2CV102M3, max UDMA/133 [ 2.230432] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 2.230984] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 2.230990] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 2.230994] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 2.231368] ata1.00: configured for UDMA/133 [ 2.231572] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSA1M160 2CV1 PQ: 0 ANSI: 5 [ 2.231769] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.231801] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 2.231957] sd 0:0:0:0: [sda] Write Protect is off [ 2.231961] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.232008] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.233563] sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 > sda4 [ 2.234000] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.270108] hub 2-1:1.0: USB hub found [ 2.270188] hub 2-1:1.0: 8 ports detected [ 2.349400] usb 1-1.3: new full speed USB device using ehci_hcd and address 3 [ 2.538918] usb 1-1.4: new full speed USB device using ehci_hcd and address 4 [ 2.728477] usb 1-1.5: new high speed USB device using ehci_hcd and address 5 [ 2.838763] hub 1-1.5:1.0: USB hub found [ 2.838888] hub 1-1.5:1.0: 6 ports detected [ 2.917975] usb 1-1.6: new high speed USB device using ehci_hcd and address 6 [ 3.117471] usb 1-1.5.2: new full speed USB device using ehci_hcd and address 7 [ 3.177208] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.184812] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded [ 3.189848] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded [ 3.191493] ata2.00: ATAPI: Optiarc DVD RW AD-7930H, 1.D1, max UDMA/100 [ 3.204067] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded [ 3.209141] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded [ 3.210787] ata2.00: configured for UDMA/100 [ 3.226823] scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7930H 1.D1 PQ: 0 ANSI: 5 [ 3.230453] hub 1-1.5.2:1.0: USB hub found [ 3.230783] hub 1-1.5.2:1.0: 2 ports detected [ 3.243594] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.243599] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 3.243778] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 3.243921] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 3.326949] usb 1-1.5.4: new high speed USB device using ehci_hcd and address 8 [ 3.437223] hub 1-1.5.4:1.0: USB hub found [ 3.437384] hub 1-1.5.4:1.0: 4 ports detected [ 3.516476] usb 1-1.5.5: new high speed USB device using ehci_hcd and address 9 [ 3.586176] ata5: SATA link down (SStatus 0 SControl 300) [ 3.626724] hub 1-1.5.5:1.0: USB hub found [ 3.626893] hub 1-1.5.5:1.0: 4 ports detected [ 3.705999] usb 1-1.5.6: new low speed USB device using ehci_hcd and address 10 [ 3.895656] usb 1-1.5.2.1: new full speed USB device using ehci_hcd and address 11 [ 3.935304] ata6: SATA link down (SStatus 0 SControl 300) [ 3.943954] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5.6/1-1.5.6:1.0/input/input4 [ 3.944044] generic-usb 0003:046D:C050.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.0-1.5.6/input0 [ 3.944056] usbcore: registered new interface driver usbhid [ 3.944058] usbhid: USB HID core driver [ 3.972782] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) [ 4.065029] input: Chicony Lenovo Preferred Pro USB Fingerprint Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5.2/1-1.5.2.1/1-1.5.2.1:1.0/input/input5 [ 4.065160] generic-usb 0003:17EF:600B.0002: input,hidraw1: USB HID v1.10 Keyboard [Chicony Lenovo Preferred Pro USB Fingerprint Keyboard] on usb-0000:00:1a.0-1.5.2.1/input0 [ 4.066443] generic-usb 0003:17EF:600B.0003: hiddev0,hidraw2: USB HID v1.10 Device [Chicony Lenovo Preferred Pro USB Fingerprint Keyboard] on usb-0000:00:1a.0-1.5.2.1/input1 [ 4.144868] usb 1-1.5.2.2: new full speed USB device using ehci_hcd and address 12 [ 4.171045] Adding 2001916k swap on /dev/sda7. Priority:-1 extents:1 across:2001916k SS [ 4.178623] udev[390]: starting version 167 [ 4.205269] lp: driver loaded but no devices found [ 4.229262] Non-volatile memory driver v1.3 [ 4.245531] tpm_tis 00:0b: 1.2 TPM (device-id 0x0, rev-id 78) [ 4.280050] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro [ 4.295062] type=1400 audit(1301478577.247:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=567 comm="apparmor_parser" [ 4.295688] type=1400 audit(1301478577.247:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=567 comm="apparmor_parser" [ 4.296119] type=1400 audit(1301478577.247:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=567 comm="apparmor_parser" [ 4.309686] [drm] Initialized drm 1.1.0 20060810 [ 4.313906] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29) [ 4.313922] intel ips 0000:00:1f.6: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 4.315722] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [ 4.316720] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled [ 4.324094] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90 [ 4.334363] usb 1-1.5.5.2: new full speed USB device using ehci_hcd and address 13 [ 4.359599] cfg80211: Calling CRDA to update world regulatory domain [ 4.396315] Bluetooth: Core ver 2.15 [ 4.396343] NET: Registered protocol family 31 [ 4.396345] Bluetooth: HCI device and connection manager initialized [ 4.396348] Bluetooth: HCI socket layer initialized [ 4.400738] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 4.413616] Linux video capture interface: v2.00 [ 4.433093] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null) [ 4.437157] usbcore: registered new interface driver btusb [ 4.447289] input: C-Media Electronics Inc. USB Multimedia Audio Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5.5/1-1.5.5.2/1-1.5.5.2:1.3/input/input6 [ 4.447490] generic-usb 0003:0D8C:0105.0004: input,hidraw3: USB HID v1.00 Device [C-Media Electronics Inc. USB Multimedia Audio Device] on usb-0000:00:1a.0-1.5.5.2/input3 [ 4.457576] uvcvideo: Found UVC 1.00 device Integrated Camera (17ef:480f) [ 4.460251] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input7 [ 4.468231] usbcore: registered new interface driver uvcvideo [ 4.468235] USB Video Class driver (v1.0.0) [ 4.505203] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 4.505277] HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X [ 4.505309] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 4.529896] type=1400 audit(1301478577.477:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=835 comm="apparmor_parser" [ 4.530733] type=1400 audit(1301478577.477:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=835 comm="apparmor_parser" [ 4.531149] type=1400 audit(1301478577.477:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=841 comm="apparmor_parser" [ 4.531158] type=1400 audit(1301478577.477:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=835 comm="apparmor_parser" [ 4.531834] type=1400 audit(1301478577.477:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=841 comm="apparmor_parser" [ 4.533512] type=1400 audit(1301478577.477:10): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=834 comm="apparmor_parser" [ 4.539067] thinkpad_acpi: ThinkPad ACPI Extras v0.24 [ 4.539070] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 4.539072] thinkpad_acpi: ThinkPad BIOS 6IET74WW (1.34 ), EC 6IHT38WW-1.13 [ 4.539074] thinkpad_acpi: Lenovo ThinkPad T410, model 25379WG [ 4.539841] thinkpad_acpi: detected a 8-level brightness capable ThinkPad [ 4.539994] thinkpad_acpi: radio switch found; radios are enabled [ 4.542117] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked [ 4.542545] Registered led device: tpacpi::thinklight [ 4.542592] Registered led device: tpacpi::power [ 4.542623] Registered led device: tpacpi::standby [ 4.542658] Registered led device: tpacpi::thinkvantage [ 4.544769] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one. [ 4.544930] thinkpad_acpi: Console audio control enabled, mode: monitor (read only) [ 4.546121] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input8 [ 4.553956] usb 1-1.5.5.3: new high speed USB device using ehci_hcd and address 14 [ 4.592202] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree: [ 4.592205] iwlagn: Copyright(c) 2003-2010 Intel Corporation [ 4.592279] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 4.592288] iwlagn 0000:03:00.0: setting latency timer to 64 [ 4.592330] iwlagn 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6200 AGN, REV=0x74 [ 4.608443] iwlagn 0000:03:00.0: device EEPROM VER=0x436, CALIB=0x6 [ 4.608447] iwlagn 0000:03:00.0: Device SKU: 0Xb [ 4.608507] iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels [ 4.608589] iwlagn 0000:03:00.0: irq 44 for MSI/MSI-X [ 4.664975] hub 1-1.5.5.3:1.0: USB hub found [ 4.665035] hub 1-1.5.5.3:1.0: 4 ports detected [ 4.693540] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X [ 4.712013] Bluetooth: L2CAP ver 2.15 [ 4.712018] Bluetooth: L2CAP socket layer initialized [ 4.715593] i915 0000:00:02.0: power state changed by ACPI to D0 [ 4.715598] i915 0000:00:02.0: power state changed by ACPI to D0 [ 4.715606] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4.715609] i915 0000:00:02.0: setting latency timer to 64 [ 4.724469] iwlagn 0000:03:00.0: loaded firmware version 9.221.4.1 build 25532 [ 4.724804] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 4.739965] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 4.739974] cfg80211: World regulatory domain updated: [ 4.739975] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 4.739978] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 4.739981] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 4.739984] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 4.739986] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 4.739988] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 4.740150] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 4.740152] Bluetooth: BNEP filters: protocol multicast [ 4.743524] usb 1-1.5.5.4: new high speed USB device using ehci_hcd and address 15 [ 4.750963] Bluetooth: SCO (Voice Link) ver 0.6 [ 4.750966] Bluetooth: SCO socket layer initialized [ 4.753253] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X [ 4.754139] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 4.760849] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 4.792965] Bluetooth: RFCOMM TTY layer initialized [ 4.792971] Bluetooth: RFCOMM socket layer initialized [ 4.792973] Bluetooth: RFCOMM ver 1.11 [ 4.798795] i915 0000:00:02.0: irq 45 for MSI/MSI-X [ 4.798801] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 4.798803] [drm] Driver supports precise vblank timestamp query. [ 4.842273] usbcore: registered new interface driver snd-usb-audio [ 4.869012] [drm:intel_dsm_pci_probe] *ERROR* failed to get supported _DSM functions [ 4.883376] udlfb: DisplayLink Lenovo Enhanced USB Port Replicator - serial #01>0-157273 [ 4.883381] udlfb: vid_17e9&pid_01e0&rev_0003 driver's dlfb_data struct at ffff880231e13000 [ 4.883384] udlfb: console enable=0 [ 4.883385] udlfb: fb_defio enable=0 [ 4.884356] udlfb: vendor descriptor length:e0 data:00 00 00 0000 00 00 00 00 00 00 [ 4.884357] udlfb: Unrecognized vendor firmware descriptor [ 4.884398] udlfb: allocated 4 65024 byte urbs [ 4.978651] udlfb: 1600x1200 valid mode [ 4.978658] udlfb: 720x400 valid mode [ 4.978660] udlfb: 640x480 valid mode [ 4.978661] udlfb: 640x480 valid mode [ 4.978662] udlfb: 640x480 valid mode [ 4.978663] udlfb: 800x600 valid mode [ 4.978665] udlfb: 800x600 valid mode [ 4.978666] udlfb: 800x600 valid mode [ 4.978667] udlfb: 800x600 valid mode [ 4.978668] udlfb: 832x624 valid mode [ 4.978669] udlfb: 1024x768 valid mode [ 4.978670] udlfb: 1024x768 valid mode [ 4.978671] udlfb: 1024x768 valid mode [ 4.978672] udlfb: 1280x1024 valid mode [ 4.978673] udlfb: 1152x864 valid mode [ 4.978675] udlfb: 640x480 valid mode [ 4.978676] udlfb: 640x480 valid mode [ 4.978677] udlfb: 1024x768 valid mode [ 4.978678] udlfb: 1280x1024 valid mode [ 4.978679] udlfb: 1280x1024 valid mode [ 4.978681] udlfb: 1280x1024 valid mode [ 4.978682] udlfb: 1600x1200 valid mode [ 4.978684] udlfb: Reallocating framebuffer. Addresses will change! [ 4.980371] udlfb: 1600x1200 valid mode [ 4.980374] udlfb: set_par mode 1600x1200 [ 4.986274] udlfb: DisplayLink USB device /dev/fb0 attached. 1600x1200 resolution. Using 7504K framebuffer memory [ 4.986291] udlfb: DisplayLink Lenovo Enhanced USB Port Replicator - serial #01>0-157273 [ 4.986294] udlfb: vid_17e9&pid_01e0&rev_0003 driver's dlfb_data struct at ffff880224070000 [ 4.986295] udlfb: console enable=0 [ 4.986296] udlfb: fb_defio enable=0 [ 4.986971] udlfb: vendor descriptor length:e0 data:00 00 00 0000 00 00 00 00 00 00 [ 4.986973] udlfb: Unrecognized vendor firmware descriptor [ 4.987022] udlfb: allocated 4 65024 byte urbs [ 5.086000] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 5.099335] udlfb: 1600x1200 valid mode [ 5.099340] udlfb: 720x400 valid mode [ 5.099343] udlfb: 640x480 valid mode [ 5.099347] udlfb: 640x480 valid mode [ 5.099349] udlfb: 640x480 valid mode [ 5.099353] udlfb: 800x600 valid mode [ 5.099357] udlfb: 800x600 valid mode [ 5.099362] udlfb: 800x600 valid mode [ 5.099365] udlfb: 800x600 valid mode [ 5.099369] udlfb: 832x624 valid mode [ 5.099373] udlfb: 1024x768 valid mode [ 5.099378] udlfb: 1024x768 valid mode [ 5.099382] udlfb: 1024x768 valid mode [ 5.099385] udlfb: 1280x1024 valid mode [ 5.099388] udlfb: 1152x864 valid mode [ 5.099390] udlfb: 640x480 valid mode [ 5.099395] udlfb: 640x480 valid mode [ 5.099396] udlfb: 1024x768 valid mode [ 5.099397] udlfb: 1280x1024 valid mode [ 5.099398] udlfb: 1280x1024 valid mode [ 5.099400] udlfb: 1280x1024 valid mode [ 5.099401] udlfb: 1600x1200 valid mode [ 5.099403] udlfb: Reallocating framebuffer. Addresses will change! [ 5.100828] udlfb: 1600x1200 valid mode [ 5.100833] udlfb: set_par mode 1600x1200 [ 5.104717] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 5.107309] udlfb: DisplayLink USB device /dev/fb1 attached. 1600x1200 resolution. Using 7504K framebuffer memory [ 5.107705] usbcore: registered new interface driver udlfb [ 5.122322] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro,commit=0 [ 5.143380] EXT4-fs (sda5): re-mounted. Opts: commit=0 [ 5.145742] EXT4-fs (sda8): re-mounted. Opts: commit=0 [ 5.192385] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b3/0xb40000/0xa0000 [ 5.192392] serio: Synaptics pass-through port at isa0060/serio1/input0 [ 5.241589] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9 [ 5.468293] fb2: inteldrmfb frame buffer device [ 5.468296] drm: registered panic notifier [ 5.522569] acpi device:02: registered as cooling_device4 [ 5.524202] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input10 [ 5.524257] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 5.524538] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 5.552690] cfg80211: Found new beacon on frequency: 2472 MHz (Ch 13) on phy0 [ 5.596097] ppdev: user-space parallel port driver [ 6.325350] udlfb: open /dev/fb0 user=1 fb_info=ffff880224063000 count=1 [ 6.325354] udlfb: released /dev/fb0 user=1 count=0 [ 9.501719] intel ips 0000:00:1f.6: i915 driver attached, reenabling gpu turbo [ 9.929443] cannot submit datapipe for urb 0, error -28: not enough bandwidth [ 10.105806] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro,commit=0 [ 10.119860] EXT4-fs (sda5): re-mounted. Opts: commit=0 [ 10.121707] EXT4-fs (sda8): re-mounted. Opts: commit=0 [ 11.641492] IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 11.893449] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input11 [ 15.663427] cannot submit datapipe for urb 0, error -28: not enough bandwidth [ 25.129168] wlan0: authenticate with 00:3a:98:c5:d2:11 (try 1) [ 25.321659] wlan0: authenticate with 00:3a:98:c5:d2:11 (try 2) [ 25.323109] wlan0: authenticated [ 25.323576] wlan0: associate with 00:3a:98:c5:d2:11 (try 1) [ 25.325411] wlan0: RX AssocResp from 00:3a:98:c5:d2:11 (capab=0x431 status=0 aid=103) [ 25.325416] wlan0: associated [ 25.328870] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 25.328944] cfg80211: Calling CRDA for country: IE [ 25.331969] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 25.331973] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 25.331975] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 25.331977] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 25.331979] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 25.331981] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 25.331987] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 25.331989] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 25.331991] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 25.331993] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 25.331994] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 25.331997] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 25.331999] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 25.332001] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 25.332002] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 25.332005] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 25.332006] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 25.332008] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 25.332010] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 25.332013] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 25.332015] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 25.332017] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 25.332019] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: [ 25.332021] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 25.332023] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: [ 25.332025] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 25.332027] cfg80211: Updating information on frequency 5180 MHz for a 20 MHz width channel with regulatory rule: [ 25.332029] cfg80211: 5170000 KHz - 5250000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 25.332030] cfg80211: Updating information on frequency 5200 MHz for a 20 MHz width channel with regulatory rule: [ 25.332032] cfg80211: 5170000 KHz - 5250000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 25.332034] cfg80211: Updating information on frequency 5220 MHz for a 20 MHz width channel with regulatory rule: [ 25.332036] cfg80211: 5170000 KHz - 5250000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 25.332038] cfg80211: Updating information on frequency 5240 MHz for a 20 MHz width channel with regulatory rule: [ 25.332040] cfg80211: 5170000 KHz - 5250000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 25.332042] cfg80211: Updating information on frequency 5260 MHz for a 20 MHz width channel with regulatory rule: [ 25.332044] cfg80211: 5250000 KHz - 5330000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 25.332046] cfg80211: Updating information on frequency 5280 MHz for a 20 MHz width channel with regulatory rule: [ 25.332048] cfg80211: 5250000 KHz - 5330000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 25.332050] cfg80211: Updating information on frequency 5300 MHz for a 20 MHz width channel with regulatory rule: [ 25.332052] cfg80211: 5250000 KHz - 5330000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 25.332054] cfg80211: Updating information on frequency 5320 MHz for a 20 MHz width channel with regulatory rule: [ 25.332056] cfg80211: 5250000 KHz - 5330000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 25.332058] cfg80211: Updating information on frequency 5500 MHz for a 20 MHz width channel with regulatory rule: [ 25.332060] cfg80211: 5490000 KHz - 5710000 KHz @ KHz), (N/A mBi, 2700 mBm) [ 25.332062] cfg80211: Updating information on frequency 5520 MHz for a 20 MHz width channel with regulatory rule: [ 25.332064] cfg80211: 5490000 KHz - 5710000 KHz @ KHz), (N/A mBi, 2700 mBm) [ 25.332066] cfg80211: Updating information on frequency 5540 MHz for a 20 MHz width channel with regulatory rule: [ 25.332068] cfg80211: 5490000 KHz - 5710000 KHz @ KHz), (N/A mBi, 2700 mBm) [ 25.332070] cfg80211: Updating information on frequency 5560 MHz for a 20 MHz width channel with regulatory rule: [ 25.332072] cfg80211: 5490000 KHz - 5710000 KHz @ KHz), (N/A mBi, 2700 mBm) [ 25.332074] cfg80211: Updating information on frequency 5580 MHz for a 20 MHz width channel with regulatory rule: [ 25.332076] cfg80211: 5490000 KHz - 5710000 KHz @ KHz), (N/A mBi, 2700 mBm) [ 25.332078] cfg80211: Updating information on frequency 5600 MHz for a 20 MHz width channel with regulatory rule: [ 25.332080] cfg80211: 5490000 KHz - 5710000 KHz @ KHz), (N/A mBi, 2700 mBm) [ 25.332082] cfg80211: Updating information on frequency 5620 MHz for a 20 MHz width channel with regulatory rule: [ 25.332084] cfg80211: 5490000 KHz - 5710000 KHz @ KHz), (N/A mBi, 2700 mBm) [ 25.332085] cfg80211: Updating information on frequency 5640 MHz for a 20 MHz width channel with regulatory rule: [ 25.332088] cfg80211: 5490000 KHz - 5710000 KHz @ KHz), (N/A mBi, 2700 mBm) [ 25.332090] cfg80211: Updating information on frequency 5660 MHz for a 20 MHz width channel with regulatory rule: [ 25.332092] cfg80211: 5490000 KHz - 5710000 KHz @ KHz), (N/A mBi, 2700 mBm) [ 25.332094] cfg80211: Updating information on frequency 5680 MHz for a 20 MHz width channel with regulatory rule: [ 25.332096] cfg80211: 5490000 KHz - 5710000 KHz @ KHz), (N/A mBi, 2700 mBm) [ 25.332098] cfg80211: Updating information on frequency 5700 MHz for a 20 MHz width channel with regulatory rule: [ 25.332100] cfg80211: 5490000 KHz - 5710000 KHz @ KHz), (N/A mBi, 2700 mBm) [ 25.332102] cfg80211: Disabling freq 5745 MHz [ 25.332104] cfg80211: Disabling freq 5765 MHz [ 25.332105] cfg80211: Disabling freq 5785 MHz [ 25.332106] cfg80211: Disabling freq 5805 MHz [ 25.332108] cfg80211: Disabling freq 5825 MHz [ 25.332111] cfg80211: Regulatory domain changed to country: IE [ 25.332113] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 25.332115] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 25.332117] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 25.332119] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 25.332121] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) [ 25.339245] padlock_aes: VIA PadLock not detected. [ 27.343358] wlan0: deauthenticating from 00:3a:98:c5:d2:11 by local choice (reason=3) [ 27.486450] cfg80211: All devices are disconnected, going to restore regulatory settings [ 27.486491] cfg80211: Restoring regulatory settings [ 27.486496] cfg80211: Calling CRDA to update world regulatory domain [ 27.489282] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 27.489287] cfg80211: World regulatory domain updated: [ 27.489288] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 27.489290] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 27.489291] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 27.489293] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 27.489294] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 27.489296] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 28.486919] udlfb: open /dev/fb0 user=1 fb_info=ffff880224063000 count=1 [ 28.486923] udlfb: released /dev/fb0 user=1 count=0 [ 35.755450] wlan0: no IPv6 routers present [ 45.479914] wlan0: authenticate with 00:3a:98:c5:d2:11 (try 1) [ 45.481299] wlan0: authenticated [ 45.481999] wlan0: associate with 00:3a:98:c5:d2:11 (try 1) [ 45.484275] wlan0: RX AssocResp from 00:3a:98:c5:d2:11 (capab=0x431 status=0 aid=104) [ 45.484278] wlan0: associated [ 45.486578] cfg80211: Calling CRDA for country: IE [ 45.489693] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 45.489696] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 45.489698] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 45.489699] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 45.489701] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 45.489703] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 45.489704] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 45.489706] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 45.489707] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 45.489708] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 45.489710] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 45.489711] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 45.489712] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 45.489714] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 45.489715] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 45.489717] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 45.489718] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 45.489720] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 45.489721] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 45.489723] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 45.489724] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 45.489726] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 45.489727] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: [ 45.489729] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 45.489730] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: [ 45.489731] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 45.489733] cfg80211: Updating information on frequency 5180 MHz for a 20 MHz width channel with regulatory rule: [ 45.489734] cfg80211: 5170000 KHz - 5250000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 45.489736] cfg80211: Updating information on frequency 5200 MHz for a 20 MHz width channel with regulatory rule: [ 45.489737] cfg80211: 5170000 KHz - 5250000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 45.489739] cfg80211: Updating information on frequency 5220 MHz for a 20 MHz width channel with regulatory rule: [ 45.489740] cfg80211: 5170000 KHz - 5250000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 45.489741] cfg80211: Updating information on frequency 5240 MHz for a 20 MHz width channel with regulatory rule: [ 45.489743] cfg80211: 5170000 KHz - 5250000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 45.489744] cfg80211: Updating information on frequency 5260 MHz for a 20 MHz width channel with regulatory rule: [ 45.489746] cfg80211: 5250000 KHz - 5330000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 45.489747] cfg80211: Updating information on frequency 5280 MHz for a 20 MHz width channel with regulatory rule: [ 45.489749] cfg80211: 5250000 KHz - 5330000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 45.489750] cfg80211: Updating information on frequency 5300 MHz for a 20 MHz width channel with regulatory rule: [ 45.489752] cfg80211: 5250000 KHz - 5330000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 45.489753] cfg80211: Updating information on frequency 5320 MHz for a 20 MHz width channel with regulatory rule: [ 45.489755] cfg80211: 5250000 KHz - 5330000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 45.489756] cfg80211: Updating information on frequency 5500 MHz for a 20 MHz width channel with regulatory rule: [ 45.489757] cfg80211: 5490000 KHz - 5710000 KHz @ KHz), (N/A mBi, 2700 mBm) [ 45.489759] cfg80211: Updating information on frequency 5520 MHz for a 20 MHz width channel with regulatory rule: [ 45.489760] cfg80211: 5490000 KHz - 5710000 KHz @ KHz), (N/A mBi, 2700 mBm) [ 45.489762] cfg80211: Updating information on frequency 5540 MHz for a 20 MHz width channel with regulatory rule: [ 45.489763] cfg80211: 5490000 KHz - 5710000 KHz @ KHz), (N/A mBi, 2700 mBm) [ 45.489765] cfg80211: Updating information on frequency 5560 MHz for a 20 MHz width channel with regulatory rule: [ 45.489766] cfg80211: 5490000 KHz - 5710000 KHz @ KHz), (N/A mBi, 2700 mBm) [ 45.489767] cfg80211: Updating information on frequency 5580 MHz for a 20 MHz width channel with regulatory rule: [ 45.489769] cfg80211: 5490000 KHz - 5710000 KHz @ KHz), (N/A mBi, 2700 mBm) [ 45.489770] cfg80211: Updating information on frequency 5600 MHz for a 20 MHz width channel with regulatory rule: [ 45.489772] cfg80211: 5490000 KHz - 5710000 KHz @ KHz), (N/A mBi, 2700 mBm) [ 45.489773] cfg80211: Updating information on frequency 5620 MHz for a 20 MHz width channel with regulatory rule: [ 45.489775] cfg80211: 5490000 KHz - 5710000 KHz @ KHz), (N/A mBi, 2700 mBm) [ 45.489776] cfg80211: Updating information on frequency 5640 MHz for a 20 MHz width channel with regulatory rule: [ 45.489778] cfg80211: 5490000 KHz - 5710000 KHz @ KHz), (N/A mBi, 2700 mBm) [ 45.489779] cfg80211: Updating information on frequency 5660 MHz for a 20 MHz width channel with regulatory rule: [ 45.489781] cfg80211: 5490000 KHz - 5710000 KHz @ KHz), (N/A mBi, 2700 mBm) [ 45.489782] cfg80211: Updating information on frequency 5680 MHz for a 20 MHz width channel with regulatory rule: [ 45.489784] cfg80211: 5490000 KHz - 5710000 KHz @ KHz), (N/A mBi, 2700 mBm) [ 45.489785] cfg80211: Updating information on frequency 5700 MHz for a 20 MHz width channel with regulatory rule: [ 45.489787] cfg80211: 5490000 KHz - 5710000 KHz @ KHz), (N/A mBi, 2700 mBm) [ 45.489788] cfg80211: Disabling freq 5745 MHz [ 45.489789] cfg80211: Disabling freq 5765 MHz [ 45.489789] cfg80211: Disabling freq 5785 MHz [ 45.489790] cfg80211: Disabling freq 5805 MHz [ 45.489791] cfg80211: Disabling freq 5825 MHz [ 45.489794] cfg80211: Regulatory domain changed to country: IE [ 45.489795] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 45.489797] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 45.489798] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 45.489800] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 45.489801] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) [ 99.280074] wlan0: deauthenticating from 00:3a:98:c5:d2:11 by local choice (reason=3) [ 99.368078] wlan0: authenticate with 00:1a:30:8f:ac:21 (try 1) [ 99.369999] wlan0: authenticated [ 99.380568] wlan0: associate with 00:1a:30:8f:ac:21 (try 1) [ 99.382771] wlan0: RX AssocResp from 00:1a:30:8f:ac:21 (capab=0x431 status=0 aid=7) [ 99.382776] wlan0: associated