[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-25-generic (buildd@allspice) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #45-Ubuntu SMP Sat Oct 16 19:52:42 UTC 2010 (Ubuntu 2.6.32-25.45-generic 2.6.32.21+drm33.7) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-25-generic root=UUID=0fd26186-21d7-42c7-9623-3fe82928785a ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 0000000037fb0000 (usable) [ 0.000000] BIOS-e820: 0000000037fb0000 - 0000000037fc8000 (reserved) [ 0.000000] BIOS-e820: 0000000037fc8000 - 0000000037fe7fb8 (ACPI NVS) [ 0.000000] BIOS-e820: 0000000037fe7fb8 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec02000 (reserved) [ 0.000000] BIOS-e820: 00000000ffbc0000 - 00000000ffcc0000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.4 present. [ 0.000000] last_pfn = 0x37fb0 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C0FFF write-protect [ 0.000000] C1000-C3FFF write-back [ 0.000000] C4000-C4FFF write-protect [ 0.000000] C5000-C7FFF write-back [ 0.000000] C8000-C8FFF write-protect [ 0.000000] C9000-CBFFF write-back [ 0.000000] CC000-CCFFF write-protect [ 0.000000] CD000-CFFFF write-back [ 0.000000] D0000-D0FFF write-protect [ 0.000000] D1000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FFE0000000 write-back [ 0.000000] 1 base 0020000000 mask FFF0000000 write-back [ 0.000000] 2 base 0030000000 mask FFF8000000 write-back [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable) [ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009fc00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 0000000037fb0000 (usable) [ 0.000000] modified: 0000000037fb0000 - 0000000037fc8000 (reserved) [ 0.000000] modified: 0000000037fc8000 - 0000000037fe7fb8 (ACPI NVS) [ 0.000000] modified: 0000000037fe7fb8 - 0000000040000000 (reserved) [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec02000 (reserved) [ 0.000000] modified: 00000000ffbc0000 - 00000000ffcc0000 (reserved) [ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-0000000037fb0000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0000000000 - 0037e00000 page 2M [ 0.000000] 0037e00000 - 0037fb0000 page 4k [ 0.000000] kernel direct mapping tables up to 37fb0000 @ 8000-b000 [ 0.000000] RAMDISK: 29810000 - 2a003a11 [ 0.000000] ACPI: RSDP 00000000000fe0b0 00024 (v02 HP ) [ 0.000000] ACPI: XSDT 0000000037fc81bc 00064 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001) [ 0.000000] ACPI: FACP 0000000037fc8084 000F4 (v04 HP 0944 00000003 HP 00000001) [ 0.000000] ACPI Error: 32/64X address mismatch in Pm2ControlBlock: 00008800/0000000000008100, using 32 (20090903/tbfadt-427) [ 0.000000] ACPI: DSDT 0000000037fc84a4 11437 (v01 HP SB400 00010000 MSFT 03000001) [ 0.000000] ACPI: FACS 0000000037fe7d80 00040 [ 0.000000] ACPI: SLIC 0000000037fc8220 00176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001) [ 0.000000] ACPI: EPTH 0000000037fc8398 00038 (v01 HP 0944 00000001 HP 00000001) [ 0.000000] ACPI: APIC 0000000037fc83d0 00062 (v01 HP 0944 00000001 HP 00000001) [ 0.000000] ACPI: MCFG 0000000037fc8434 0003C (v01 HP 0944 00000001 HP 00000001) [ 0.000000] ACPI: TCPA 0000000037fc8470 00032 (v02 HP 0944 00000001 HP 00000001) [ 0.000000] ACPI: SSDT 0000000037fd98db 00059 (v01 HP HPQNLP 00000001 MSFT 03000001) [ 0.000000] ACPI: SSDT 0000000037fd9934 00206 (v01 HP PSSTBLID 00000001 HP 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000037fb0000 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000037fb0000 [ 0.000000] NODE_DATA [0000000000009000 - 000000000000dfff] [ 0.000000] bootmap [000000000000e000 - 0000000000014ff7] pages 7 [ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 0037fb0000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 0001a2ca64] TEXT DATA BSS ==> [0001000000 - 0001a2ca64] [ 0.000000] #3 [0029810000 - 002a003a11] RAMDISK ==> [0029810000 - 002a003a11] [ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #5 [0001a2d000 - 0001a2d19c] BRK ==> [0001a2d000 - 0001a2d19c] [ 0.000000] #6 [0000008000 - 0000009000] PGTABLE ==> [0000008000 - 0000009000] [ 0.000000] [ffffea0000000000-ffffea0000dfffff] PMD -> [ffff880002000000-ffff880002dfffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000001 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x00037fb0 [ 0.000000] On node 0 totalpages: 229194 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 100 pages reserved [ 0.000000] DMA zone: 3838 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 3079 pages used for memmap [ 0.000000] DMA32 zone: 222121 pages, LIFO batch:31 [ 0.000000] SB600 revision 0x13 [ 0.000000] Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x8008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880001c00000 s91544 r8192 d23144 u1048576 [ 0.000000] pcpu-alloc: s91544 r8192 d23144 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 225959 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-25-generic root=UUID=0fd26186-21d7-42c7-9623-3fe82928785a ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ 800000000 size 32 MB [ 0.000000] Aperture beyond 4GB. Ignoring. [ 0.000000] Memory: 883484k/917184k available (5420k kernel code, 408k absent, 33292k reserved, 2974k data, 872k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:424 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 9175040 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Fast TSC calibration failed [ 0.000000] TSC: Unable to calibrate against PIT [ 0.000000] TSC: using PMTIMER reference calibration [ 0.000000] Detected 1994.883 MHz processor. [ 0.050023] Calibrating delay loop (skipped), value calculated using timer frequency.. 3989.76 BogoMIPS (lpj=19948830) [ 0.050090] Security Framework initialized [ 0.050132] AppArmor: AppArmor initialized [ 0.050428] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.052065] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.052830] Mount-cache hash table entries: 256 [ 0.053194] Initializing cgroup subsys ns [ 0.053216] Initializing cgroup subsys cpuacct [ 0.053221] Initializing cgroup subsys memory [ 0.053249] Initializing cgroup subsys devices [ 0.053252] Initializing cgroup subsys freezer [ 0.053254] Initializing cgroup subsys net_cls [ 0.053313] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.053316] CPU: L2 Cache: 512K (64 bytes/line) [ 0.053319] CPU 0/0x0 -> Node 0 [ 0.053321] tseg: 0000000000 [ 0.053358] CPU: Physical Processor ID: 0 [ 0.053378] CPU: Processor Core ID: 0 [ 0.053381] mce: CPU supports 5 MCE banks [ 0.053413] using C1E aware idle routine [ 0.053415] Performance Events: AMD PMU driver. [ 0.053421] ... version: 0 [ 0.053422] ... bit width: 48 [ 0.053424] ... generic registers: 4 [ 0.053444] ... value mask: 0000ffffffffffff [ 0.053446] ... max period: 00007fffffffffff [ 0.053448] ... fixed-purpose events: 0 [ 0.053450] ... event mask: 000000000000000f [ 0.062790] ACPI: Core revision 20090903 [ 0.110027] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.110040] ftrace: allocating 22538 entries in 89 pages [ 0.120114] Setting APIC routing to flat [ 0.120440] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 0.222412] CPU0: AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping 01 [ 0.230000] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.060000] Initializing CPU#1 [ 0.060000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.060000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.060000] CPU 1/0x1 -> Node 0 [ 0.060000] CPU: Physical Processor ID: 0 [ 0.060000] CPU: Processor Core ID: 1 [ 0.060000] System has AMD C1E enabled [ 0.060000] Switch to broadcast mode on CPU1 [ 0.380111] CPU1: AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping 01 [ 0.380142] Brought up 2 CPUs [ 0.380145] Total of 2 processors activated (7979.87 BogoMIPS). [ 0.380326] CPU0 attaching sched-domain: [ 0.380329] domain 0: span 0-1 level MC [ 0.380332] groups: 0 1 [ 0.380339] CPU1 attaching sched-domain: [ 0.380342] domain 0: span 0-1 level MC [ 0.380344] groups: 1 0 [ 0.380443] Switch to broadcast mode on CPU0 [ 0.380443] devtmpfs: initialized [ 0.380443] regulator: core version 0.5 [ 0.380443] Time: 21:19:57 Date: 11/12/10 [ 0.380443] NET: Registered protocol family 16 [ 0.380443] node 0 link 0: io port [1000, fffff] [ 0.380443] Trying to unpack rootfs image as initramfs... [ 0.380443] TOM: 0000000040000000 aka 1024M [ 0.380443] node 0 link 0: mmio [e0000000, efffffff] [ 0.380443] node 0 link 0: mmio [f0000000, ffffffff] [ 0.380443] node 0 link 0: mmio [c8000000, dfffffff] [ 0.380443] node 0 link 0: mmio [c0000000, c7ffffff] [ 0.380443] node 0 link 0: mmio [a0000, bffff] [ 0.380443] node 0 link 0: mmio [40000000, bfffffff] [ 0.380443] bus: [00,ff] on node 0 link 0 [ 0.380443] bus: 00 index 0 io port: [0, ffff] [ 0.380443] bus: 00 index 1 mmio: [40000000, fcffffffff] [ 0.380443] bus: 00 index 2 mmio: [a0000, bffff] [ 0.380443] ACPI: bus type pci registered [ 0.380443] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.380443] PCI: MCFG area at e0000000 reserved in E820 [ 0.387087] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.387091] PCI: Using configuration type 1 for base access [ 0.390178] bio: create slab at 0 [ 0.391101] ACPI: EC: Look up EC in DSDT [ 0.588577] Freeing initrd memory: 8142k freed [ 0.630225] ACPI: Interpreter enabled [ 0.630231] ACPI: (supports S0 S3 S4 S5) [ 0.630253] ACPI: Using IOAPIC for interrupt routing [ 0.644069] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62 [ 0.644151] ACPI: Power Resource [C171] (off) [ 0.644195] ACPI: Power Resource [C24C] (on) [ 0.644287] ACPI: Power Resource [C395] (off) [ 0.644369] ACPI: Power Resource [C396] (off) [ 0.644450] ACPI: Power Resource [C397] (off) [ 0.644531] ACPI: Power Resource [C398] (off) [ 0.644892] ACPI: No dock devices found. [ 0.651113] ACPI: PCI Root Bridge [C08B] (0000:00) [ 0.651246] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 0.651249] pci 0000:00:04.0: PME# disabled [ 0.651285] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 0.651288] pci 0000:00:05.0: PME# disabled [ 0.651324] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.651327] pci 0000:00:06.0: PME# disabled [ 0.651385] pci 0000:00:12.0: reg 10 io port: [0x9000-0x9007] [ 0.651393] pci 0000:00:12.0: reg 14 io port: [0x9008-0x900b] [ 0.651401] pci 0000:00:12.0: reg 18 io port: [0x9010-0x9017] [ 0.651408] pci 0000:00:12.0: reg 1c io port: [0x5018-0x501b] [ 0.651416] pci 0000:00:12.0: reg 20 io port: [0x5020-0x502f] [ 0.651424] pci 0000:00:12.0: reg 24 32bit mmio: [0xd0409000-0xd04093ff] [ 0.651443] pci 0000:00:12.0: set SATA to AHCI mode [ 0.651487] pci 0000:00:13.0: reg 10 32bit mmio: [0xd0401000-0xd0401fff] [ 0.651548] pci 0000:00:13.1: reg 10 32bit mmio: [0xd0402000-0xd0402fff] [ 0.651608] pci 0000:00:13.2: reg 10 32bit mmio: [0xd0403000-0xd0403fff] [ 0.651671] pci 0000:00:13.3: reg 10 32bit mmio: [0xd0404000-0xd0404fff] [ 0.651731] pci 0000:00:13.4: reg 10 32bit mmio: [0xd0405000-0xd0405fff] [ 0.651811] pci 0000:00:13.5: reg 10 32bit mmio: [0xd0406000-0xd04060ff] [ 0.651867] pci 0000:00:13.5: supports D1 D2 [ 0.651869] pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot [ 0.651874] pci 0000:00:13.5: PME# disabled [ 0.651923] pci 0000:00:14.0: reg 10 io port: [0x8200-0x820f] [ 0.651997] pci 0000:00:14.1: reg 10 io port: [0x00-0x07] [ 0.652004] pci 0000:00:14.1: reg 14 io port: [0x00-0x03] [ 0.652012] pci 0000:00:14.1: reg 18 io port: [0x00-0x07] [ 0.652020] pci 0000:00:14.1: reg 1c io port: [0x00-0x03] [ 0.652027] pci 0000:00:14.1: reg 20 io port: [0x5040-0x504f] [ 0.652086] pci 0000:00:14.2: reg 10 64bit mmio: [0xd0408000-0xd040bfff] [ 0.652132] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.652136] pci 0000:00:14.2: PME# disabled [ 0.652350] pci 0000:01:05.0: reg 10 64bit mmio pref: [0xc0000000-0xc7ffffff] [ 0.652356] pci 0000:01:05.0: reg 18 64bit mmio: [0xd0200000-0xd020ffff] [ 0.652361] pci 0000:01:05.0: reg 20 io port: [0x4000-0x40ff] [ 0.652365] pci 0000:01:05.0: reg 24 32bit mmio: [0xd0300000-0xd03fffff] [ 0.652377] pci 0000:01:05.0: supports D1 D2 [ 0.652396] pci 0000:00:01.0: bridge io port: [0x4000-0x4fff] [ 0.652399] pci 0000:00:01.0: bridge 32bit mmio: [0xd0200000-0xd03fffff] [ 0.652403] pci 0000:00:01.0: bridge 64bit mmio pref: [0xc0000000-0xc7ffffff] [ 0.652493] pci 0000:10:00.0: reg 10 64bit mmio: [0xd0000000-0xd000ffff] [ 0.652553] pci 0000:10:00.0: PME# supported from D3hot D3cold [ 0.652558] pci 0000:10:00.0: PME# disabled [ 0.652620] pci 0000:00:04.0: bridge 32bit mmio: [0xd0000000-0xd00fffff] [ 0.652677] pci 0000:00:05.0: bridge io port: [0x2000-0x3fff] [ 0.652680] pci 0000:00:05.0: bridge 32bit mmio: [0xcc000000-0xcfffffff] [ 0.652732] pci 0000:00:06.0: bridge 32bit mmio: [0xc8000000-0xc80fffff] [ 0.652788] pci 0000:02:04.0: reg 10 32bit mmio: [0xd0100000-0xd0100fff] [ 0.652814] pci 0000:02:04.0: supports D1 D2 [ 0.652816] pci 0000:02:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.652821] pci 0000:02:04.0: PME# disabled [ 0.652888] pci 0000:00:14.4: transparent bridge [ 0.652895] pci 0000:00:14.4: bridge 32bit mmio: [0xd0100000-0xd01fffff] [ 0.652937] ACPI: PCI Interrupt Routing Table [\_SB_.C08B._PRT] [ 0.653219] ACPI: PCI Interrupt Routing Table [\_SB_.C08B.C08C._PRT] [ 0.653302] ACPI: PCI Interrupt Routing Table [\_SB_.C08B.C0FC._PRT] [ 0.676371] ACPI: PCI Interrupt Link [C145] (IRQs 10 11) *0, disabled. [ 0.676536] ACPI: PCI Interrupt Link [C146] (IRQs 10 11) *0, disabled. [ 0.676700] ACPI: PCI Interrupt Link [C147] (IRQs 10 11) *0, disabled. [ 0.676863] ACPI: PCI Interrupt Link [C148] (IRQs 10 11) *0, disabled. [ 0.677026] ACPI: PCI Interrupt Link [C149] (IRQs 10 11) *0, disabled. [ 0.677196] ACPI: PCI Interrupt Link [C14A] (IRQs 9) *0, disabled. [ 0.677359] ACPI: PCI Interrupt Link [C14B] (IRQs 10 11) *0, disabled. [ 0.677523] ACPI: PCI Interrupt Link [C14C] (IRQs 10 11) *0, disabled. [ 0.677680] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none [ 0.677685] vgaarb: loaded [ 0.677822] SCSI subsystem initialized [ 0.677897] libata version 3.00 loaded. [ 0.677897] usbcore: registered new interface driver usbfs [ 0.677897] usbcore: registered new interface driver hub [ 0.677897] usbcore: registered new device driver usb [ 0.677897] ACPI: WMI: Mapper loaded [ 0.677897] PCI: Using ACPI for IRQ routing [ 0.677897] pci 0000:00:14.2: BAR 0: address space collision on of device [0xd0408000-0xd040bfff] [ 0.677897] pci 0000:00:14.2: BAR 0: can't allocate resource [ 0.677897] NetLabel: Initializing [ 0.677897] NetLabel: domain hash size = 128 [ 0.677897] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.677897] NetLabel: unlabeled traffic allowed by default [ 0.680853] AppArmor: AppArmor Filesystem Enabled [ 0.680878] pnp: PnP ACPI init [ 0.680899] ACPI: bus type pnp registered [ 0.691311] pnp: PnP ACPI: found 11 devices [ 0.691314] ACPI: ACPI bus type pnp unregistered [ 0.691327] system 00:00: iomem range 0x0-0x9ffff could not be reserved [ 0.691331] system 00:00: iomem range 0xe0000-0xfffff could not be reserved [ 0.691334] system 00:00: iomem range 0x100000-0xffffffff could not be reserved [ 0.691345] system 00:08: ioport range 0x40b-0x40b has been reserved [ 0.691347] system 00:08: ioport range 0x4d0-0x4d1 has been reserved [ 0.691350] system 00:08: ioport range 0x4d6-0x4d6 has been reserved [ 0.691353] system 00:08: ioport range 0x500-0x53f has been reserved [ 0.691356] system 00:08: ioport range 0xc00-0xc01 has been reserved [ 0.691359] system 00:08: ioport range 0xc14-0xc14 has been reserved [ 0.691362] system 00:08: ioport range 0xc50-0xc51 has been reserved [ 0.691365] system 00:08: ioport range 0xc52-0xc52 has been reserved [ 0.691368] system 00:08: ioport range 0xc6c-0xc6c has been reserved [ 0.691371] system 00:08: ioport range 0xc6f-0xc6f has been reserved [ 0.691379] system 00:08: ioport range 0xcd0-0xcdf has been reserved [ 0.691383] system 00:08: iomem range 0xffb00000-0xffbfffff could not be reserved [ 0.691386] system 00:08: iomem range 0xfff00000-0xffffffff has been reserved [ 0.691392] system 00:09: ioport range 0x8000-0x802f has been reserved [ 0.691396] system 00:09: ioport range 0x8100-0x811f has been reserved [ 0.691399] system 00:09: iomem range 0xe0000000-0xefffffff has been reserved [ 0.691406] system 00:09: iomem range 0xfec00000-0xfec000ff could not be reserved [ 0.691409] system 00:09: iomem range 0xfed45000-0xfed8ffff has been reserved [ 0.691414] system 00:0a: iomem range 0xcd400-0xcffff has been reserved [ 0.691417] system 00:0a: iomem range 0xd2a00-0xd2fff has been reserved [ 0.691420] system 00:0a: iomem range 0x0-0x7ffffff could not be reserved [ 0.691423] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.696163] Switching to clocksource acpi_pm [ 0.696227] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.696227] pci 0000:00:01.0: IO window: 0x4000-0x4fff [ 0.696227] pci 0000:00:01.0: MEM window: 0xd0200000-0xd03fffff [ 0.696227] pci 0000:00:01.0: PREFETCH window: 0x000000c0000000-0x000000c7ffffff [ 0.696227] pci 0000:00:04.0: PCI bridge, secondary bus 0000:10 [ 0.696227] pci 0000:00:04.0: IO window: disabled [ 0.696227] pci 0000:00:04.0: MEM window: 0xd0000000-0xd00fffff [ 0.696227] pci 0000:00:04.0: PREFETCH window: disabled [ 0.696227] pci 0000:00:05.0: PCI bridge, secondary bus 0000:20 [ 0.696227] pci 0000:00:05.0: IO window: 0x2000-0x3fff [ 0.696227] pci 0000:00:05.0: MEM window: 0xcc000000-0xcfffffff [ 0.696227] pci 0000:00:05.0: PREFETCH window: disabled [ 0.696227] pci 0000:00:06.0: PCI bridge, secondary bus 0000:30 [ 0.696227] pci 0000:00:06.0: IO window: disabled [ 0.696227] pci 0000:00:06.0: MEM window: 0xc8000000-0xc80fffff [ 0.696227] pci 0000:00:06.0: PREFETCH window: disabled [ 0.696227] pci 0000:02:04.0: CardBus bridge, secondary bus 0000:03 [ 0.696227] pci 0000:02:04.0: IO window: 0x001000-0x0010ff [ 0.696227] pci 0000:02:04.0: IO window: 0x001400-0x0014ff [ 0.696227] pci 0000:02:04.0: PREFETCH window: 0x40000000-0x43ffffff [ 0.696227] pci 0000:02:04.0: MEM window: 0x48000000-0x4bffffff [ 0.696227] pci 0000:00:14.4: PCI bridge, secondary bus 0000:02 [ 0.696227] pci 0000:00:14.4: IO window: 0x1000-0x1fff [ 0.696227] pci 0000:00:14.4: MEM window: 0xd0100000-0xd01fffff [ 0.696227] pci 0000:00:14.4: PREFETCH window: 0x40000000-0x43ffffff [ 0.696227] pci 0000:00:04.0: setting latency timer to 64 [ 0.696227] pci 0000:00:05.0: setting latency timer to 64 [ 0.696227] pci 0000:00:06.0: setting latency timer to 64 [ 0.696227] alloc irq_desc for 20 on node 0 [ 0.696227] alloc kstat_irqs on node 0 [ 0.696227] pci 0000:02:04.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.696227] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.696227] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.696227] pci_bus 0000:01: resource 0 io: [0x4000-0x4fff] [ 0.696227] pci_bus 0000:01: resource 1 mem: [0xd0200000-0xd03fffff] [ 0.696227] pci_bus 0000:01: resource 2 pref mem [0xc0000000-0xc7ffffff] [ 0.696227] pci_bus 0000:10: resource 1 mem: [0xd0000000-0xd00fffff] [ 0.696227] pci_bus 0000:20: resource 0 io: [0x2000-0x3fff] [ 0.696227] pci_bus 0000:20: resource 1 mem: [0xcc000000-0xcfffffff] [ 0.696227] pci_bus 0000:30: resource 1 mem: [0xc8000000-0xc80fffff] [ 0.696227] pci_bus 0000:02: resource 0 io: [0x1000-0x1fff] [ 0.696227] pci_bus 0000:02: resource 1 mem: [0xd0100000-0xd01fffff] [ 0.696227] pci_bus 0000:02: resource 2 pref mem [0x40000000-0x43ffffff] [ 0.696227] pci_bus 0000:02: resource 3 io: [0x00-0xffff] [ 0.696227] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.696227] pci_bus 0000:03: resource 0 io: [0x1000-0x10ff] [ 0.696227] pci_bus 0000:03: resource 1 io: [0x1400-0x14ff] [ 0.696227] pci_bus 0000:03: resource 2 pref mem [0x40000000-0x43ffffff] [ 0.696227] pci_bus 0000:03: resource 3 mem: [0x48000000-0x4bffffff] [ 0.696227] NET: Registered protocol family 2 [ 0.696227] IP route cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.696227] TCP established hash table entries: 131072 (order: 9, 2097152 bytes) [ 0.696227] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.696227] TCP: Hash tables configured (established 131072 bind 65536) [ 0.696227] TCP reno registered [ 0.696227] NET: Registered protocol family 1 [ 0.696227] pci 0000:01:05.0: Boot video device [ 0.696227] Scanning for low memory corruption every 60 seconds [ 0.696227] audit: initializing netlink socket (disabled) [ 0.696227] type=2000 audit(1289596796.693:1): initialized [ 0.705235] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.707074] VFS: Disk quotas dquot_6.5.2 [ 0.707141] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.707960] fuse init (API version 7.13) [ 0.708065] msgmni has been set to 1741 [ 0.708424] alg: No test for stdrng (krng) [ 0.708496] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.708499] io scheduler noop registered [ 0.708501] io scheduler anticipatory registered [ 0.708503] io scheduler deadline registered [ 0.708548] io scheduler cfq registered (default) [ 0.708834] alloc irq_desc for 24 on node 0 [ 0.708836] alloc kstat_irqs on node 0 [ 0.708846] pcieport 0000:00:04.0: irq 24 for MSI/MSI-X [ 0.708852] pcieport 0000:00:04.0: setting latency timer to 64 [ 0.708979] alloc irq_desc for 25 on node 0 [ 0.708981] alloc kstat_irqs on node 0 [ 0.708986] pcieport 0000:00:05.0: irq 25 for MSI/MSI-X [ 0.708990] pcieport 0000:00:05.0: setting latency timer to 64 [ 0.709118] alloc irq_desc for 26 on node 0 [ 0.709120] alloc kstat_irqs on node 0 [ 0.709125] pcieport 0000:00:06.0: irq 26 for MSI/MSI-X [ 0.709130] pcieport 0000:00:06.0: setting latency timer to 64 [ 0.709201] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.709228] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.713061] ACPI: AC Adapter [C1EB] (on-line) [ 0.713170] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 [ 0.713175] ACPI: Sleep Button [C28D] [ 0.713224] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 0.713296] ACPI: Lid Switch [C265] [ 0.713348] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.713350] ACPI: Power Button [PWRF] [ 0.713571] fan PNP0C0B:00: registered as cooling_device0 [ 0.713580] ACPI: Fan [C399] (off) [ 0.713744] fan PNP0C0B:01: registered as cooling_device1 [ 0.713750] ACPI: Fan [C39A] (off) [ 0.713914] fan PNP0C0B:02: registered as cooling_device2 [ 0.713920] ACPI: Fan [C39B] (off) [ 0.714085] fan PNP0C0B:03: registered as cooling_device3 [ 0.714091] ACPI: Fan [C39C] (off) [ 0.714371] ACPI: processor limited to max C-state 1 [ 0.714396] processor LNXCPU:00: registered as cooling_device4 [ 0.714526] processor LNXCPU:01: registered as cooling_device5 [ 0.727925] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.727935] ACPI: Thermal Zone [TZ1] (48 C) [ 0.728778] ACPI: Battery Slot [C1EC] (battery absent) [ 0.730213] Linux agpgart interface v0.103 [ 0.730257] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.731741] brd: module loaded [ 0.732291] loop: module loaded [ 0.732410] input: Macintosh mouse button emulation as /devices/virtual/input/input3 [ 0.732731] alloc irq_desc for 16 on node 0 [ 0.732733] alloc kstat_irqs on node 0 [ 0.732741] pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.733234] Fixed MDIO Bus: probed [ 0.733274] PPP generic driver version 2.4.2 [ 0.733321] tun: Universal TUN/TAP device driver, 1.6 [ 0.733323] tun: (C) 1999-2004 Max Krasnyansky [ 0.733422] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.733494] alloc irq_desc for 23 on node 0 [ 0.733496] alloc kstat_irqs on node 0 [ 0.733501] ehci_hcd 0000:00:13.5: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 0.733523] ehci_hcd 0000:00:13.5: EHCI Host Controller [ 0.733604] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1 [ 0.733646] ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround [ 0.733662] ehci_hcd 0000:00:13.5: debug port 1 [ 0.733690] ehci_hcd 0000:00:13.5: irq 23, io mem 0xd0406000 [ 0.760058] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00 [ 0.760168] usb usb1: configuration #1 chosen from 1 choice [ 0.760204] hub 1-0:1.0: USB hub found [ 0.760213] hub 1-0:1.0: 10 ports detected [ 0.760308] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.760381] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.760397] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 0.760446] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 [ 0.760467] ohci_hcd 0000:00:13.0: irq 23, io mem 0xd0401000 [ 0.770752] ACPI: Battery Slot [C1ED] (battery present) [ 0.814135] usb usb2: configuration #1 chosen from 1 choice [ 0.814163] hub 2-0:1.0: USB hub found [ 0.814178] hub 2-0:1.0: 2 ports detected [ 0.814310] alloc irq_desc for 17 on node 0 [ 0.814312] alloc kstat_irqs on node 0 [ 0.814320] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.814332] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 0.814371] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 [ 0.814400] ohci_hcd 0000:00:13.1: irq 17, io mem 0xd0402000 [ 0.874134] usb usb3: configuration #1 chosen from 1 choice [ 0.874161] hub 3-0:1.0: USB hub found [ 0.874175] hub 3-0:1.0: 2 ports detected [ 0.874287] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 17 (level, low) -> IRQ 17 [ 0.874302] ohci_hcd 0000:00:13.2: OHCI Host Controller [ 0.874347] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4 [ 0.874368] ohci_hcd 0000:00:13.2: irq 17, io mem 0xd0403000 [ 0.934122] usb usb4: configuration #1 chosen from 1 choice [ 0.934152] hub 4-0:1.0: USB hub found [ 0.934166] hub 4-0:1.0: 2 ports detected [ 0.934270] ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.934281] ohci_hcd 0000:00:13.3: OHCI Host Controller [ 0.934319] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5 [ 0.934339] ohci_hcd 0000:00:13.3: irq 17, io mem 0xd0404000 [ 0.994124] usb usb5: configuration #1 chosen from 1 choice [ 0.994150] hub 5-0:1.0: USB hub found [ 0.994164] hub 5-0:1.0: 2 ports detected [ 0.994271] ohci_hcd 0000:00:13.4: PCI INT C -> GSI 17 (level, low) -> IRQ 17 [ 0.994283] ohci_hcd 0000:00:13.4: OHCI Host Controller [ 0.994322] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6 [ 0.994341] ohci_hcd 0000:00:13.4: irq 17, io mem 0xd0405000 [ 1.054123] usb usb6: configuration #1 chosen from 1 choice [ 1.054150] hub 6-0:1.0: USB hub found [ 1.054166] hub 6-0:1.0: 2 ports detected [ 1.054233] uhci_hcd: USB Universal Host Controller Interface driver [ 1.054311] PNP: PS/2 Controller [PNP0303:C249,PNP0f13:C24A] at 0x60,0x64 irq 1,12 [ 1.055936] i8042.c: Detected active multiplexing controller, rev 1.1. [ 1.056669] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.056676] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 1.056704] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 1.056731] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 1.056757] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 1.056883] mice: PS/2 mouse device common for all mice [ 1.057036] rtc_cmos 00:05: RTC can wake from S4 [ 1.057091] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 1.057120] rtc0: alarms up to one month, y3k, 114 bytes nvram [ 1.057274] device-mapper: uevent: version 1.0.3 [ 1.057399] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 1.057525] device-mapper: multipath: version 1.1.0 loaded [ 1.057528] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1.057808] cpuidle: using governor ladder [ 1.057810] cpuidle: using governor menu [ 1.058266] TCP cubic registered [ 1.058459] NET: Registered protocol family 10 [ 1.059016] lo: Disabled Privacy Extensions [ 1.059366] NET: Registered protocol family 17 [ 1.059417] powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-60 processors (2 cpu cores) (version 2.20.00) [ 1.059484] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x13 [ 1.059487] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x14 [ 1.059489] powernow-k8: 2 : fid 0x8 (1600 MHz), vid 0x15 [ 1.059492] powernow-k8: 3 : fid 0x0 (800 MHz), vid 0x1e [ 1.059578] powernow-k8: ph2 null fid transition 0xc [ 1.059717] PM: Resume from disk failed. [ 1.059733] registered taskstats version 1 [ 1.060129] Magic number: 2:432:348 [ 1.060252] rtc_cmos 00:05: setting system clock to 2010-11-12 21:19:58 UTC (1289596798) [ 1.060255] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.060257] EDD information not available. [ 1.060346] Freeing unused kernel memory: 872k freed [ 1.060903] Write protecting the kernel read-only data: 7692k [ 1.078828] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 1.085253] udev: starting version 151 [ 1.164760] tg3.c:v3.102 (September 1, 2009) [ 1.164824] tg3 0000:10:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.164964] tg3 0000:10:00.0: setting latency timer to 64 [ 1.185409] ahci 0000:00:12.0: version 3.0 [ 1.185436] ahci 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.185478] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit [ 1.185565] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x1 impl SATA mode [ 1.185569] ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pio slum part ccc [ 1.220323] scsi0 : ahci [ 1.232969] scsi1 : ahci [ 1.241217] scsi2 : ahci [ 1.257725] scsi3 : ahci [ 1.257891] ata1: SATA max UDMA/133 abar m1024@0xd0409000 port 0xd0409100 irq 16 [ 1.257894] ata2: DUMMY [ 1.257896] ata3: DUMMY [ 1.257897] ata4: DUMMY [ 1.272306] scsi4 : pata_atiixp [ 1.272704] scsi5 : pata_atiixp [ 1.273214] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x5040 irq 14 [ 1.273217] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x5048 irq 15 [ 1.440085] usb 2-2: new full speed USB device using ohci_hcd and address 2 [ 1.450521] ata5.00: ATAPI: HL-DT-ST DVDRAM GSA-T20L, NC08, max MWDMA2 [ 1.490472] ata5.00: configured for MWDMA2 [ 1.646192] usb 2-2: configuration #1 chosen from 1 choice [ 1.780067] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.780830] ata1.00: ATA-7: Hitachi HTS541616J9SA00, SB4OC7BP, max UDMA/100 [ 1.780834] ata1.00: 312581808 sectors, multi 16: LBA48 [ 1.780855] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd [ 1.781797] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd [ 1.781800] ata1.00: configured for UDMA/100 [ 1.800163] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54161 SB4O PQ: 0 ANSI: 5 [ 1.800370] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.800526] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 1.800593] sd 0:0:0:0: [sda] Write Protect is off [ 1.800596] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.800623] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.800775] sda: [ 1.804157] scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T20L NC08 PQ: 0 ANSI: 5 [ 1.815175] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.815179] Uniform CD-ROM driver Revision: 3.20 [ 1.815289] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 1.815355] sr 4:0:0:0: Attached scsi generic sg1 type 5 [ 1.960088] usb 3-1: new low speed USB device using ohci_hcd and address 2 [ 2.152163] usb 3-1: configuration #1 chosen from 1 choice [ 2.169304] usbcore: registered new interface driver hiddev [ 2.173445] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:13.1/usb3/3-1/3-1:1.0/input/input5 [ 2.173567] generic-usb 0003:046D:C51B.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:13.1-1/input0 [ 2.179260] generic-usb 0003:046D:C51B.0002: hiddev96,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:13.1-1/input1 [ 2.179290] usbcore: registered new interface driver usbhid [ 2.179293] usbhid: v2.6:USB HID core driver [ 2.215371] sda1 sda2 < sda5 > [ 2.234911] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.481837] eth0: Tigon3 [partno(BCM95906) rev c002] (PCI Express) MAC address 00:1a:4b:63:de:67 [ 2.481842] eth0: attached PHY is 5906 (10/100Base-TX Ethernet) (WireSpeed[0]) [ 2.481845] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[0] [ 2.481848] eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 2.616445] EXT4-fs (sda1): mounted filesystem with ordered data mode [ 11.134529] udev: starting version 151 [ 11.153401] Adding 2612216k swap on /dev/sda5. Priority:-1 extents:1 across:2612216k [ 11.296747] acpi device:01: registered as cooling_device6 [ 11.297283] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:00/LNXVIDEO:00/input/input6 [ 11.297356] ACPI: Video Device [C08D] (multi-head: yes rom: no post: no) [ 11.320876] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 11.399370] EDAC MC: Ver: 2.1.0 Oct 16 2010 [ 11.406144] lp: driver loaded but no devices found [ 11.434898] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 11.458261] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x8200, revision 0 [ 11.572564] EDAC amd64_edac: Ver: 3.2.0 Oct 16 2010 [ 11.581196] Bluetooth: Core ver 2.15 [ 11.585424] NET: Registered protocol family 31 [ 11.585428] Bluetooth: HCI device and connection manager initialized [ 11.585432] Bluetooth: HCI socket layer initialized [ 11.586447] [drm] Initialized drm 1.1.0 20060810 [ 11.591833] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3). [ 11.591845] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 11.591847] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 11.591849] (Note that use of the override may cause unknown side effects.) [ 11.591886] amd64_edac: probe of 0000:00:18.2 failed with error -22 [ 11.593180] yenta_cardbus 0000:02:04.0: CardBus bridge found [103c:30c2] [ 11.625605] type=1505 audit(1289596809.059:2): operation="profile_load" pid=728 name="/sbin/dhclient3" [ 11.625894] type=1505 audit(1289596809.059:3): operation="profile_load" pid=728 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 11.626064] type=1505 audit(1289596809.059:4): operation="profile_load" pid=728 name="/usr/lib/connman/scripts/dhclient-script" [ 11.639706] [drm] radeon defaulting to kernel modesetting. [ 11.639711] [drm] radeon kernel modesetting enabled. [ 11.639890] alloc irq_desc for 19 on node 0 [ 11.639893] alloc kstat_irqs on node 0 [ 11.639902] radeon 0000:01:05.0: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 11.644643] [drm] radeon: Initializing kernel modesetting. [ 11.647455] [drm] register mmio base: 0xD0200000 [ 11.647458] [drm] register mmio size: 65536 [ 11.647552] ATOM BIOS: ATI [ 11.647777] [drm] GPU reset succeed (RBBM_STATUS=0x10000140) [ 11.647800] [drm] radeon: VRAM 128M [ 11.647801] [drm] radeon: VRAM from 0x38000000 to 0x3FFFFFFF [ 11.647803] [drm] radeon: GTT 512M [ 11.647805] [drm] radeon: GTT from 0x40000000 to 0x5FFFFFFF [ 11.647849] alloc irq_desc for 27 on node 0 [ 11.647852] alloc kstat_irqs on node 0 [ 11.647862] radeon 0000:01:05.0: irq 27 for MSI/MSI-X [ 11.647866] [drm] radeon: using MSI. [ 11.647893] [drm] radeon: irq initialized. [ 11.648166] [drm] Detected VRAM RAM=128M, BAR=128M [ 11.648171] [drm] RAM width 128bits DDR [ 11.655854] [TTM] Zone kernel: Available graphics memory: 446250 kiB. [ 11.655881] [drm] radeon: 128M of VRAM memory ready [ 11.655883] [drm] radeon: 512M of GTT memory ready. [ 11.655901] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 11.660098] [drm] radeon: 1 quad pipes, 1 z pipes initialized. [ 11.660133] [drm] radeon: cp idle (0x10000C03) [ 11.660258] [drm] Loading RS690/RS740 Microcode [ 11.660662] platform radeon_cp.0: firmware: requesting radeon/RS690_cp.bin [ 11.678954] [drm] radeon: ring at 0x0000000040000000 [ 11.678976] [drm] ring test succeeded in 1 usecs [ 11.679182] [drm] radeon: ib pool ready. [ 11.679278] [drm] ib test succeeded in 0 usecs [ 11.679448] [drm] Default TV standard: NTSC [ 11.679477] [drm] Radeon Display Connectors [ 11.679479] [drm] Connector 0: [ 11.679481] [drm] VGA [ 11.679484] [drm] DDC: 0x7e50 0x7e40 0x7e54 0x7e44 0x7e58 0x7e48 0x7e5c 0x7e4c [ 11.679486] [drm] Encoders: [ 11.679488] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 11.679490] [drm] Connector 1: [ 11.679491] [drm] LVDS [ 11.679494] [drm] DDC: 0x7e40 0x7e50 0x7e44 0x7e54 0x7e48 0x7e58 0x7e4c 0x7e5c [ 11.679495] [drm] Encoders: [ 11.679497] [drm] LCD1: INTERNAL_LVTM1 [ 11.679499] [drm] Connector 2: [ 11.679500] [drm] S-video [ 11.679502] [drm] Encoders: [ 11.679503] [drm] TV1: INTERNAL_KLDSCP_DAC1 [ 11.730858] yenta_cardbus 0000:02:04.0: ISA IRQ mask 0x0cb8, PCI irq 20 [ 11.730864] yenta_cardbus 0000:02:04.0: Socket status: 30000006 [ 11.730868] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #03 to #06 [ 11.730879] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge I/O window: 0x1000 - 0x1fff [ 11.730883] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge Memory window: 0xd0100000 - 0xd01fffff [ 11.730887] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x43ffffff [ 11.797384] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 11.798020] usbcore: registered new interface driver btusb [ 11.802203] HDA Intel 0000:00:14.2: power state changed by ACPI to D0 [ 11.802258] HDA Intel 0000:00:14.2: power state changed by ACPI to D0 [ 11.802273] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 11.968847] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input7 [ 12.168543] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x2580b1, caps: 0xa04793/0x300000 [ 12.168550] serio: Synaptics pass-through port at isa0060/serio4/input0 [ 12.208878] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8 [ 12.257906] type=1505 audit(1289596809.689:5): operation="profile_load" pid=898 name="/usr/share/gdm/guest-session/Xsession" [ 12.258820] alloc irq_desc for 28 on node 0 [ 12.258825] alloc kstat_irqs on node 0 [ 12.258840] tg3 0000:10:00.0: irq 28 for MSI/MSI-X [ 12.260806] type=1505 audit(1289596809.699:6): operation="profile_replace" pid=899 name="/sbin/dhclient3" [ 12.261107] type=1505 audit(1289596809.699:7): operation="profile_replace" pid=899 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 12.261278] type=1505 audit(1289596809.699:8): operation="profile_replace" pid=899 name="/usr/lib/connman/scripts/dhclient-script" [ 12.265685] type=1505 audit(1289596809.699:9): operation="profile_load" pid=900 name="/usr/bin/evince" [ 12.269503] type=1505 audit(1289596809.699:10): operation="profile_load" pid=900 name="/usr/bin/evince-previewer" [ 12.271847] type=1505 audit(1289596809.709:11): operation="profile_load" pid=900 name="/usr/bin/evince-thumbnailer" [ 12.301511] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 12.438617] [drm] fb mappable at 0xC0040000 [ 12.438620] [drm] vram apper at 0xC0000000 [ 12.438622] [drm] size 4096000 [ 12.438624] [drm] fb depth is 24 [ 12.438625] [drm] pitch is 5120 [ 12.438827] fb0: radeondrmfb frame buffer device [ 12.438829] registered panic notifier [ 12.438835] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:05.0 on minor 0 [ 12.441091] vga16fb: initializing [ 12.441096] vga16fb: mapped to 0xffff8800000a0000 [ 12.441103] vga16fb: not registering due to another framebuffer present [ 12.534499] Bluetooth: L2CAP ver 2.14 [ 12.534502] Bluetooth: L2CAP socket layer initialized [ 12.603744] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 12.603747] Bluetooth: BNEP filters: protocol multicast [ 12.641325] Bridge firewalling registered [ 12.666077] Bluetooth: SCO (Voice Link) ver 0.6 [ 12.666080] Bluetooth: SCO socket layer initialized [ 12.679692] Console: switching to colour frame buffer device 160x50 [ 12.963024] Bluetooth: RFCOMM TTY layer initialized [ 12.963030] Bluetooth: RFCOMM socket layer initialized [ 12.963033] Bluetooth: RFCOMM ver 1.11 [ 13.267798] ppdev: user-space parallel port driver [ 13.902775] tg3: eth0: Link is up at 100 Mbps, full duplex. [ 13.902779] tg3: eth0: Flow control is on for TX and on for RX. [ 13.902992] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 24.740042] eth0: no IPv6 routers present [ 34.986828] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 55.418844] lo: Disabled Privacy Extensions [ 74.380050] Clocksource tsc unstable (delta = -301228270 ns) [ 2490.013643] tg3: eth0: Link is down. [ 2932.079002] tg3: eth0: Link is up at 100 Mbps, full duplex. [ 2932.079013] tg3: eth0: Flow control is on for TX and on for RX. [ 6679.313077] PM: Syncing filesystems ... done. [ 6679.314073] PM: Preparing system for mem sleep [ 6679.314078] Freezing user space processes ... (elapsed 0.04 seconds) done. [ 6679.362957] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [ 6679.363071] PM: Entering mem sleep [ 6679.363085] Suspending console(s) (use no_console_suspend to debug) [ 6679.382622] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 6679.403923] sd 0:0:0:0: [sda] Stopping disk [ 6679.904493] PM: suspend of drv:sd dev:0:0:0:0 complete after 521.877 msecs [ 6679.904598] btusb_intr_complete: hci0 urb ffff8800356960c0 failed to resubmit (1) [ 6679.905594] btusb_bulk_complete: hci0 urb ffff88003602b300 failed to resubmit (1) [ 6679.906594] btusb_bulk_complete: hci0 urb ffff88003602b780 failed to resubmit (1) [ 6680.306150] PM: suspend of drv:psmouse dev:serio4 complete after 385.990 msecs [ 6680.401598] ACPI handle has no context! [ 6680.640110] HDA Intel 0000:00:14.2: PCI INT A disabled [ 6680.665177] HDA Intel 0000:00:14.2: power state changed by ACPI to D3 [ 6680.665186] PM: suspend of drv:HDA Intel dev:0000:00:14.2 complete after 245.115 msecs [ 6680.665319] ehci_hcd 0000:00:13.5: PCI INT D disabled [ 6680.665331] ohci_hcd 0000:00:13.4: PCI INT C disabled [ 6680.665341] ohci_hcd 0000:00:13.3: PCI INT B disabled [ 6680.665352] ohci_hcd 0000:00:13.2: PCI INT C disabled [ 6680.665362] ohci_hcd 0000:00:13.1: PCI INT B disabled [ 6680.665373] ohci_hcd 0000:00:13.0: PCI INT A disabled [ 6680.680170] ahci 0000:00:12.0: PCI INT A disabled [ 6680.681947] PM: suspend of devices complete after 1318.548 msecs [ 6680.681950] PM: suspend devices took 1.320 seconds [ 6680.700380] PM: late suspend of devices complete after 18.424 msecs [ 6680.700477] ACPI: Preparing to enter system sleep state S3 [ 6680.740039] Disabling non-boot CPUs ... [ 6680.740064] CPU0 attaching NULL sched-domain. [ 6680.740068] CPU1 attaching NULL sched-domain. [ 6680.900047] CPU0 attaching NULL sched-domain. [ 6680.901165] Broke affinity for irq 9 [ 6680.901173] Broke affinity for irq 12 [ 6680.901192] Broke affinity for irq 16 [ 6680.901205] Broke affinity for irq 23 [ 6680.901215] Broke affinity for irq 27 [ 6681.010030] CPU 1 is now offline [ 6681.010032] SMP alternatives: switching to UP code [ 6681.016537] Extended CMOS year: 2000 [ 6681.016537] Back to C! [ 6681.016537] Extended CMOS year: 2000 [ 6681.016590] powernow-k8: ph2 null fid transition 0xc [ 6681.016598] Enabling non-boot CPUs ... [ 6681.016902] SMP alternatives: switching to SMP code [ 6681.022513] Booting processor 1 APIC 0x1 ip 0x6000 [ 6681.015979] Initializing CPU#1 [ 6681.015979] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 6681.015979] CPU: L2 Cache: 512K (64 bytes/line) [ 6681.015979] CPU 1/0x1 -> Node 0 [ 6681.015979] CPU: Physical Processor ID: 0 [ 6681.015979] CPU: Processor Core ID: 1 [ 6681.015979] Switch to broadcast mode on CPU1 [ 6681.180061] CPU1: AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping 01 [ 6681.180162] CPU0 attaching NULL sched-domain. [ 6681.250051] CPU0 attaching sched-domain: [ 6681.250055] domain 0: span 0-1 level MC [ 6681.250058] groups: 0 1 [ 6681.250062] CPU1 attaching sched-domain: [ 6681.250064] domain 0: span 0-1 level MC [ 6681.250066] groups: 1 0 [ 6681.250410] CPU1 is up [ 6681.250550] ACPI: Waking up from system sleep state S3 [ 6681.600427] pcieport 0000:00:04.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [ 6681.600431] pcieport 0000:00:04.0: restoring config space at offset 0x8 (was 0x0, writing 0xd000d000) [ 6681.600435] pcieport 0000:00:04.0: restoring config space at offset 0x7 (was 0x101, writing 0x1f1) [ 6681.600440] pcieport 0000:00:04.0: restoring config space at offset 0x3 (was 0x10000, writing 0x10010) [ 6681.600443] pcieport 0000:00:04.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407) [ 6681.600471] pcieport 0000:00:05.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [ 6681.600475] pcieport 0000:00:05.0: restoring config space at offset 0x8 (was 0x0, writing 0xcff0cc00) [ 6681.600479] pcieport 0000:00:05.0: restoring config space at offset 0x7 (was 0x101, writing 0x3121) [ 6681.600483] pcieport 0000:00:05.0: restoring config space at offset 0x3 (was 0x10000, writing 0x10010) [ 6681.600487] pcieport 0000:00:05.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407) [ 6681.600510] pcieport 0000:00:06.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [ 6681.600514] pcieport 0000:00:06.0: restoring config space at offset 0x8 (was 0x0, writing 0xc800c800) [ 6681.600517] pcieport 0000:00:06.0: restoring config space at offset 0x7 (was 0x101, writing 0x1f1) [ 6681.600522] pcieport 0000:00:06.0: restoring config space at offset 0x3 (was 0x10000, writing 0x10010) [ 6681.600526] pcieport 0000:00:06.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407) [ 6681.600549] ahci 0000:00:12.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [ 6681.600568] ahci 0000:00:12.0: restoring config space at offset 0x3 (was 0x0, writing 0x4010) [ 6681.600573] ahci 0000:00:12.0: restoring config space at offset 0x2 (was 0x1018f00, writing 0x1060100) [ 6681.600592] ahci 0000:00:12.0: set SATA to AHCI mode [ 6681.600839] HDA Intel 0000:00:14.2: restoring config space at offset 0xf (was 0x10a, writing 0xa) [ 6681.600963] radeon 0000:01:05.0: restoring config space at offset 0x1 (was 0x100403, writing 0x100407) [ 6681.601038] tg3 0000:10:00.0: restoring config space at offset 0xc (was 0x0, writing 0x42000000) [ 6681.601052] tg3 0000:10:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 6681.601058] tg3 0000:10:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100006) [ 6681.601098] yenta_cardbus 0000:02:04.0: restoring config space at offset 0xf (was 0x7000100, writing 0x580010a) [ 6681.601104] yenta_cardbus 0000:02:04.0: restoring config space at offset 0xe (was 0x0, writing 0x14fc) [ 6681.601110] yenta_cardbus 0000:02:04.0: restoring config space at offset 0xd (was 0x0, writing 0x1400) [ 6681.601116] yenta_cardbus 0000:02:04.0: restoring config space at offset 0xc (was 0x0, writing 0x10fc) [ 6681.601121] yenta_cardbus 0000:02:04.0: restoring config space at offset 0xb (was 0x0, writing 0x1000) [ 6681.601127] yenta_cardbus 0000:02:04.0: restoring config space at offset 0xa (was 0x0, writing 0x4bfff000) [ 6681.601133] yenta_cardbus 0000:02:04.0: restoring config space at offset 0x9 (was 0x0, writing 0x48000000) [ 6681.601139] yenta_cardbus 0000:02:04.0: restoring config space at offset 0x8 (was 0x0, writing 0x43fff000) [ 6681.601145] yenta_cardbus 0000:02:04.0: restoring config space at offset 0x7 (was 0x0, writing 0x40000000) [ 6681.601151] yenta_cardbus 0000:02:04.0: restoring config space at offset 0x6 (was 0x0, writing 0xb0060302) [ 6681.601158] yenta_cardbus 0000:02:04.0: restoring config space at offset 0x4 (was 0x0, writing 0xd0100000) [ 6681.601164] yenta_cardbus 0000:02:04.0: restoring config space at offset 0x3 (was 0x820000, writing 0x82a800) [ 6681.601172] yenta_cardbus 0000:02:04.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100007) [ 6681.601849] PM: early resume of devices complete after 1.630 msecs [ 6681.649372] ahci 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 6681.649466] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 6681.704052] usb usb2: root hub lost power or was reset [ 6681.704066] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 6681.764053] usb usb3: root hub lost power or was reset [ 6681.764067] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 17 (level, low) -> IRQ 17 [ 6681.824052] usb usb4: root hub lost power or was reset [ 6681.824065] ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 6681.884049] usb usb5: root hub lost power or was reset [ 6681.884062] ohci_hcd 0000:00:13.4: PCI INT C -> GSI 17 (level, low) -> IRQ 17 [ 6681.944047] usb usb6: root hub lost power or was reset [ 6681.944060] ehci_hcd 0000:00:13.5: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 6681.944068] usb usb1: root hub lost power or was reset [ 6681.952545] HDA Intel 0000:00:14.2: power state changed by ACPI to D0 [ 6681.952584] HDA Intel 0000:00:14.2: power state changed by ACPI to D0 [ 6681.952620] HDA Intel 0000:00:14.2: power state changed by ACPI to D0 [ 6681.952656] HDA Intel 0000:00:14.2: power state changed by ACPI to D0 [ 6681.952663] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 6681.952929] [drm] GPU reset succeed (RBBM_STATUS=0x10000140) [ 6682.041325] [drm] radeon: 1 quad pipes, 1 z pipes initialized. [ 6682.041346] [drm] radeon: cp idle (0x10000C03) [ 6682.041359] [drm] radeon: ring at 0x0000000040000000 [ 6682.041378] [drm] ring test succeeded in 1 usecs [ 6682.041392] [drm] ib test succeeded in 0 usecs [ 6682.080051] PM: resume of drv:radeon dev:0000:01:05.0 complete after 127.334 msecs [ 6682.120510] ata5.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [ 6682.120514] ata5.00: ACPI cmd ef/03:22:00:00:00:a0 (SET FEATURES) filtered out [ 6682.160468] ata5.00: configured for MWDMA2 [ 6682.230044] PM: resume of drv:yenta_cardbus dev:0000:02:04.0 complete after 149.969 msecs [ 6682.510064] PM: resume of drv:usb dev:usb1 complete after 279.370 msecs [ 6682.840036] PM: resume of drv:usb dev:usb2 complete after 329.955 msecs [ 6683.130054] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 6683.131020] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd [ 6683.141658] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd [ 6683.141661] ata1.00: configured for UDMA/100 [ 6683.170039] PM: resume of drv:usb dev:usb3 complete after 329.984 msecs [ 6683.320040] usb 2-2: reset full speed USB device using ohci_hcd and address 2 [ 6683.512073] btusb 2-2:1.0: no reset_resume for driver btusb? [ 6683.512075] btusb 2-2:1.1: no reset_resume for driver btusb? [ 6683.760163] PM: resume of drv:usb dev:2-2 complete after 588.454 msecs [ 6683.760207] sd 0:0:0:0: [sda] Starting disk [ 6684.080036] usb 3-1: reset low speed USB device using ohci_hcd and address 2 [ 6684.423086] PM: resume of drv:usb dev:3-1 complete after 638.515 msecs [ 6684.423340] PM: resume of devices complete after 2821.464 msecs [ 6684.423610] PM: resume devices took 2.820 seconds [ 6684.423644] PM: Finishing wakeup. [ 6684.423646] Restarting tasks ... done. [ 6687.229742] tg3 0000:10:00.0: irq 28 for MSI/MSI-X [ 6687.280737] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 6688.852593] tg3: eth0: Link is up at 100 Mbps, full duplex. [ 6688.852603] tg3: eth0: Flow control is on for TX and on for RX. [ 6688.853069] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 6699.471655] eth0: no IPv6 routers present [15936.204769] tg3: eth0: Link is down. [15969.020631] tg3: eth0: Link is up at 100 Mbps, full duplex. [15969.020640] tg3: eth0: Flow control is on for TX and on for RX. [50579.132556] TCP: Peer 89.180.4.100:56299/60473 unexpectedly shrunk window 3833669895:3833671795 (repaired) [50662.002558] TCP: Peer 89.180.4.100:56299/60473 unexpectedly shrunk window 3837322968:3837325664 (repaired) [52816.920635] PM: Syncing filesystems ... done. [52816.921267] PM: Preparing system for mem sleep [52816.921272] Freezing user space processes ... (elapsed 0.40 seconds) done. [52817.323735] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [52817.323862] PM: Entering mem sleep [52817.323878] Suspending console(s) (use no_console_suspend to debug) [52817.340087] sd 0:0:0:0: [sda] Synchronizing SCSI cache [52817.360847] sd 0:0:0:0: [sda] Stopping disk [52817.864054] PM: suspend of drv:sd dev:0:0:0:0 complete after 523.973 msecs [52817.864658] btusb_intr_complete: hci0 urb ffff880029ba69c0 failed to resubmit (1) [52817.865662] btusb_bulk_complete: hci0 urb ffff880029ba6840 failed to resubmit (1) [52817.866654] btusb_bulk_complete: hci0 urb ffff880029ba6780 failed to resubmit (1) [52818.268537] PM: suspend of drv:psmouse dev:serio4 complete after 388.369 msecs [52818.370040] PM: suspend of drv:atkbd dev:serio0 complete after 101.487 msecs [52818.371598] ACPI handle has no context! [52818.500114] HDA Intel 0000:00:14.2: PCI INT A disabled [52818.524852] HDA Intel 0000:00:14.2: power state changed by ACPI to D3 [52818.524862] PM: suspend of drv:HDA Intel dev:0000:00:14.2 complete after 134.792 msecs [52818.524969] ehci_hcd 0000:00:13.5: PCI INT D disabled [52818.524981] ohci_hcd 0000:00:13.4: PCI INT C disabled [52818.524992] ohci_hcd 0000:00:13.3: PCI INT B disabled [52818.525002] ohci_hcd 0000:00:13.2: PCI INT C disabled [52818.525013] ohci_hcd 0000:00:13.1: PCI INT B disabled [52818.525024] ohci_hcd 0000:00:13.0: PCI INT A disabled [52818.540122] ahci 0000:00:12.0: PCI INT A disabled [52818.541808] PM: suspend of devices complete after 1217.612 msecs [52818.541812] PM: suspend devices took 1.220 seconds [52818.560429] PM: late suspend of devices complete after 18.610 msecs [52818.560528] ACPI: Preparing to enter system sleep state S3 [52818.600035] Disabling non-boot CPUs ... [52818.600057] CPU0 attaching NULL sched-domain. [52818.600061] CPU1 attaching NULL sched-domain. [52818.760043] CPU0 attaching NULL sched-domain. [52818.761154] Broke affinity for irq 1 [52818.761168] Broke affinity for irq 9 [52818.761176] Broke affinity for irq 12 [52818.761201] Broke affinity for irq 17 [52818.761214] Broke affinity for irq 23 [52818.761224] Broke affinity for irq 27 [52818.870032] CPU 1 is now offline [52818.870034] SMP alternatives: switching to UP code [52818.876518] Extended CMOS year: 2000 [52818.876518] Back to C! [52818.876518] Extended CMOS year: 2000 [52818.876570] powernow-k8: ph2 null fid transition 0xc [52818.876578] Enabling non-boot CPUs ... [52818.876865] SMP alternatives: switching to SMP code [52818.882477] Booting processor 1 APIC 0x1 ip 0x6000 [52818.875987] Initializing CPU#1 [52818.875987] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [52818.875987] CPU: L2 Cache: 512K (64 bytes/line) [52818.875987] CPU 1/0x1 -> Node 0 [52818.875987] CPU: Physical Processor ID: 0 [52818.875987] CPU: Processor Core ID: 1 [52818.875987] Switch to broadcast mode on CPU1 [52819.040119] CPU1: AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping 01 [52819.040241] CPU0 attaching NULL sched-domain. [52819.110052] CPU0 attaching sched-domain: [52819.110056] domain 0: span 0-1 level MC [52819.110058] groups: 0 1 [52819.110063] CPU1 attaching sched-domain: [52819.110065] domain 0: span 0-1 level MC [52819.110067] groups: 1 0 [52819.110421] CPU1 is up [52819.110559] ACPI: Waking up from system sleep state S3 [52819.450427] pcieport 0000:00:04.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [52819.450431] pcieport 0000:00:04.0: restoring config space at offset 0x8 (was 0x0, writing 0xd000d000) [52819.450435] pcieport 0000:00:04.0: restoring config space at offset 0x7 (was 0x101, writing 0x1f1) [52819.450440] pcieport 0000:00:04.0: restoring config space at offset 0x3 (was 0x10000, writing 0x10010) [52819.450443] pcieport 0000:00:04.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407) [52819.450472] pcieport 0000:00:05.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [52819.450475] pcieport 0000:00:05.0: restoring config space at offset 0x8 (was 0x0, writing 0xcff0cc00) [52819.450479] pcieport 0000:00:05.0: restoring config space at offset 0x7 (was 0x101, writing 0x3121) [52819.450483] pcieport 0000:00:05.0: restoring config space at offset 0x3 (was 0x10000, writing 0x10010) [52819.450487] pcieport 0000:00:05.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407) [52819.450510] pcieport 0000:00:06.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [52819.450514] pcieport 0000:00:06.0: restoring config space at offset 0x8 (was 0x0, writing 0xc800c800) [52819.450517] pcieport 0000:00:06.0: restoring config space at offset 0x7 (was 0x101, writing 0x1f1) [52819.450522] pcieport 0000:00:06.0: restoring config space at offset 0x3 (was 0x10000, writing 0x10010) [52819.450526] pcieport 0000:00:06.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407) [52819.450549] ahci 0000:00:12.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [52819.450568] ahci 0000:00:12.0: restoring config space at offset 0x3 (was 0x0, writing 0x4010) [52819.450573] ahci 0000:00:12.0: restoring config space at offset 0x2 (was 0x1018f00, writing 0x1060100) [52819.450593] ahci 0000:00:12.0: set SATA to AHCI mode [52819.450838] HDA Intel 0000:00:14.2: restoring config space at offset 0xf (was 0x10a, writing 0xa) [52819.450962] radeon 0000:01:05.0: restoring config space at offset 0x1 (was 0x100403, writing 0x100407) [52819.451037] tg3 0000:10:00.0: restoring config space at offset 0xc (was 0x0, writing 0x42000000) [52819.451051] tg3 0000:10:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [52819.451058] tg3 0000:10:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100006) [52819.451097] yenta_cardbus 0000:02:04.0: restoring config space at offset 0xf (was 0x7000100, writing 0x580010a) [52819.451103] yenta_cardbus 0000:02:04.0: restoring config space at offset 0xe (was 0x0, writing 0x14fc) [52819.451109] yenta_cardbus 0000:02:04.0: restoring config space at offset 0xd (was 0x0, writing 0x1400) [52819.451115] yenta_cardbus 0000:02:04.0: restoring config space at offset 0xc (was 0x0, writing 0x10fc) [52819.451121] yenta_cardbus 0000:02:04.0: restoring config space at offset 0xb (was 0x0, writing 0x1000) [52819.451127] yenta_cardbus 0000:02:04.0: restoring config space at offset 0xa (was 0x0, writing 0x4bfff000) [52819.451133] yenta_cardbus 0000:02:04.0: restoring config space at offset 0x9 (was 0x0, writing 0x48000000) [52819.451139] yenta_cardbus 0000:02:04.0: restoring config space at offset 0x8 (was 0x0, writing 0x43fff000) [52819.451145] yenta_cardbus 0000:02:04.0: restoring config space at offset 0x7 (was 0x0, writing 0x40000000) [52819.451151] yenta_cardbus 0000:02:04.0: restoring config space at offset 0x6 (was 0x0, writing 0xb0060302) [52819.451158] yenta_cardbus 0000:02:04.0: restoring config space at offset 0x4 (was 0x0, writing 0xd0100000) [52819.451164] yenta_cardbus 0000:02:04.0: restoring config space at offset 0x3 (was 0x820000, writing 0x82a800) [52819.451172] yenta_cardbus 0000:02:04.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100007) [52819.451850] PM: early resume of devices complete after 1.631 msecs [52819.500862] ahci 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [52819.500955] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [52819.564053] usb usb2: root hub lost power or was reset [52819.564066] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [52819.624053] usb usb3: root hub lost power or was reset [52819.624067] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 17 (level, low) -> IRQ 17 [52819.684052] usb usb4: root hub lost power or was reset [52819.684065] ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [52819.744055] usb usb5: root hub lost power or was reset [52819.744068] ohci_hcd 0000:00:13.4: PCI INT C -> GSI 17 (level, low) -> IRQ 17 [52819.804046] usb usb6: root hub lost power or was reset [52819.804060] ehci_hcd 0000:00:13.5: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [52819.804068] usb usb1: root hub lost power or was reset [52819.812099] HDA Intel 0000:00:14.2: power state changed by ACPI to D0 [52819.812139] HDA Intel 0000:00:14.2: power state changed by ACPI to D0 [52819.812174] HDA Intel 0000:00:14.2: power state changed by ACPI to D0 [52819.812209] HDA Intel 0000:00:14.2: power state changed by ACPI to D0 [52819.812215] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [52819.812481] [drm] GPU reset succeed (RBBM_STATUS=0x10000140) [52819.901301] [drm] radeon: 1 quad pipes, 1 z pipes initialized. [52819.901321] [drm] radeon: cp idle (0x10000C03) [52819.901335] [drm] radeon: ring at 0x0000000040000000 [52819.901353] [drm] ring test succeeded in 1 usecs [52819.901364] [drm] ib test succeeded in 0 usecs [52819.940051] PM: resume of drv:radeon dev:0000:01:05.0 complete after 127.781 msecs [52819.980517] ata5.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [52819.980520] ata5.00: ACPI cmd ef/03:22:00:00:00:a0 (SET FEATURES) filtered out [52820.020470] ata5.00: configured for MWDMA2 [52820.090045] PM: resume of drv:yenta_cardbus dev:0000:02:04.0 complete after 149.971 msecs [52820.370067] PM: resume of drv:usb dev:usb1 complete after 279.368 msecs [52820.700038] PM: resume of drv:usb dev:usb2 complete after 329.953 msecs [52820.930055] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [52820.931014] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd [52820.935330] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd [52820.935333] ata1.00: configured for UDMA/100 [52821.030052] PM: resume of drv:usb dev:usb3 complete after 329.996 msecs [52821.180041] usb 2-2: reset full speed USB device using ohci_hcd and address 2 [52821.372074] btusb 2-2:1.0: no reset_resume for driver btusb? [52821.372077] btusb 2-2:1.1: no reset_resume for driver btusb? [52821.620118] PM: resume of drv:usb dev:2-2 complete after 588.361 msecs [52821.620163] sd 0:0:0:0: [sda] Starting disk [52821.940035] usb 3-1: reset low speed USB device using ohci_hcd and address 2 [52822.283084] PM: resume of drv:usb dev:3-1 complete after 638.164 msecs [52822.283338] PM: resume of devices complete after 2831.461 msecs [52822.283601] PM: resume devices took 2.830 seconds [52822.283635] PM: Finishing wakeup. [52822.283637] Restarting tasks ... done. [52828.177527] tg3 0000:10:00.0: irq 28 for MSI/MSI-X [52828.209325] ADDRCONF(NETDEV_UP): eth0: link is not ready [52829.864244] tg3: eth0: Link is up at 100 Mbps, full duplex. [52829.864256] tg3: eth0: Flow control is on for TX and on for RX. [52829.864738] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [52840.610045] eth0: no IPv6 routers present [56227.417670] __ratelimit: 12 callbacks suppressed [56227.417682] chrome[1787] trap stack segment ip:7f13d1be9707 sp:7fff2cba4b90 error:0 [68767.351858] PM: Syncing filesystems ... done. [68767.352489] PM: Preparing system for mem sleep [68767.352494] Freezing user space processes ... (elapsed 0.11 seconds) done. [68767.469949] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [68767.470089] PM: Entering mem sleep [68767.470104] Suspending console(s) (use no_console_suspend to debug) [68767.490083] sd 0:0:0:0: [sda] Synchronizing SCSI cache [68767.538576] sd 0:0:0:0: [sda] Stopping disk [68768.039560] PM: suspend of drv:sd dev:0:0:0:0 complete after 549.478 msecs [68768.040550] btusb_intr_complete: hci0 urb ffff880014a936c0 failed to resubmit (1) [68768.041570] btusb_bulk_complete: hci0 urb ffff880014a93480 failed to resubmit (1) [68768.042547] btusb_bulk_complete: hci0 urb ffff880014a939c0 failed to resubmit (1) [68768.446223] PM: suspend of drv:psmouse dev:serio4 complete after 386.061 msecs [68768.541505] ACPI handle has no context! [68768.670116] HDA Intel 0000:00:14.2: PCI INT A disabled [68768.694932] HDA Intel 0000:00:14.2: power state changed by ACPI to D3 [68768.694942] PM: suspend of drv:HDA Intel dev:0000:00:14.2 complete after 134.873 msecs [68768.695045] ehci_hcd 0000:00:13.5: PCI INT D disabled [68768.695057] ohci_hcd 0000:00:13.4: PCI INT C disabled [68768.695067] ohci_hcd 0000:00:13.3: PCI INT B disabled [68768.695078] ohci_hcd 0000:00:13.2: PCI INT C disabled [68768.695088] ohci_hcd 0000:00:13.1: PCI INT B disabled [68768.695098] ohci_hcd 0000:00:13.0: PCI INT A disabled [68768.710127] ahci 0000:00:12.0: PCI INT A disabled [68768.711848] PM: suspend of devices complete after 1241.427 msecs [68768.711851] PM: suspend devices took 1.240 seconds [68768.730428] PM: late suspend of devices complete after 18.571 msecs [68768.730528] ACPI: Preparing to enter system sleep state S3 [68768.770039] Disabling non-boot CPUs ... [68768.770061] CPU0 attaching NULL sched-domain. [68768.770064] CPU1 attaching NULL sched-domain. [68768.930042] CPU0 attaching NULL sched-domain. [68768.931156] Broke affinity for irq 1 [68768.931171] Broke affinity for irq 9 [68768.931203] Broke affinity for irq 23 [68768.931213] Broke affinity for irq 27 [68769.040039] CPU 1 is now offline [68769.040041] SMP alternatives: switching to UP code [68769.046639] Extended CMOS year: 2000 [68769.046639] Back to C! [68769.046639] Extended CMOS year: 2000 [68769.046692] powernow-k8: ph2 null fid transition 0xc [68769.046701] Enabling non-boot CPUs ... [68769.046999] SMP alternatives: switching to SMP code [68769.052614] Booting processor 1 APIC 0x1 ip 0x6000 [68769.046083] Initializing CPU#1 [68769.046083] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [68769.046083] CPU: L2 Cache: 512K (64 bytes/line) [68769.046083] CPU 1/0x1 -> Node 0 [68769.046083] CPU: Physical Processor ID: 0 [68769.046083] CPU: Processor Core ID: 1 [68769.210042] CPU1: AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping 01 [68769.210143] CPU0 attaching NULL sched-domain. [68769.210149] Switch to broadcast mode on CPU1 [68769.280051] CPU0 attaching sched-domain: [68769.280055] domain 0: span 0-1 level MC [68769.280058] groups: 0 1 [68769.280062] CPU1 attaching sched-domain: [68769.280065] domain 0: span 0-1 level MC [68769.280067] groups: 1 0 [68769.280428] CPU1 is up [68769.280567] ACPI: Waking up from system sleep state S3 [68769.620436] pcieport 0000:00:04.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [68769.620440] pcieport 0000:00:04.0: restoring config space at offset 0x8 (was 0x0, writing 0xd000d000) [68769.620443] pcieport 0000:00:04.0: restoring config space at offset 0x7 (was 0x101, writing 0x1f1) [68769.620448] pcieport 0000:00:04.0: restoring config space at offset 0x3 (was 0x10000, writing 0x10010) [68769.620452] pcieport 0000:00:04.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407) [68769.620480] pcieport 0000:00:05.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [68769.620484] pcieport 0000:00:05.0: restoring config space at offset 0x8 (was 0x0, writing 0xcff0cc00) [68769.620487] pcieport 0000:00:05.0: restoring config space at offset 0x7 (was 0x101, writing 0x3121) [68769.620492] pcieport 0000:00:05.0: restoring config space at offset 0x3 (was 0x10000, writing 0x10010) [68769.620496] pcieport 0000:00:05.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407) [68769.620519] pcieport 0000:00:06.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [68769.620523] pcieport 0000:00:06.0: restoring config space at offset 0x8 (was 0x0, writing 0xc800c800) [68769.620526] pcieport 0000:00:06.0: restoring config space at offset 0x7 (was 0x101, writing 0x1f1) [68769.620531] pcieport 0000:00:06.0: restoring config space at offset 0x3 (was 0x10000, writing 0x10010) [68769.620535] pcieport 0000:00:06.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407) [68769.620558] ahci 0000:00:12.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [68769.620577] ahci 0000:00:12.0: restoring config space at offset 0x3 (was 0x0, writing 0x4010) [68769.620582] ahci 0000:00:12.0: restoring config space at offset 0x2 (was 0x1018f00, writing 0x1060100) [68769.620601] ahci 0000:00:12.0: set SATA to AHCI mode [68769.620848] HDA Intel 0000:00:14.2: restoring config space at offset 0xf (was 0x10a, writing 0xa) [68769.620972] radeon 0000:01:05.0: restoring config space at offset 0x1 (was 0x100403, writing 0x100407) [68769.621047] tg3 0000:10:00.0: restoring config space at offset 0xc (was 0x0, writing 0x42000000) [68769.621061] tg3 0000:10:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [68769.621067] tg3 0000:10:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100006) [68769.621107] yenta_cardbus 0000:02:04.0: restoring config space at offset 0xf (was 0x7000100, writing 0x580010a) [68769.621113] yenta_cardbus 0000:02:04.0: restoring config space at offset 0xe (was 0x0, writing 0x14fc) [68769.621119] yenta_cardbus 0000:02:04.0: restoring config space at offset 0xd (was 0x0, writing 0x1400) [68769.621125] yenta_cardbus 0000:02:04.0: restoring config space at offset 0xc (was 0x0, writing 0x10fc) [68769.621131] yenta_cardbus 0000:02:04.0: restoring config space at offset 0xb (was 0x0, writing 0x1000) [68769.621137] yenta_cardbus 0000:02:04.0: restoring config space at offset 0xa (was 0x0, writing 0x4bfff000) [68769.621143] yenta_cardbus 0000:02:04.0: restoring config space at offset 0x9 (was 0x0, writing 0x48000000) [68769.621149] yenta_cardbus 0000:02:04.0: restoring config space at offset 0x8 (was 0x0, writing 0x43fff000) [68769.621155] yenta_cardbus 0000:02:04.0: restoring config space at offset 0x7 (was 0x0, writing 0x40000000) [68769.621161] yenta_cardbus 0000:02:04.0: restoring config space at offset 0x6 (was 0x0, writing 0xb0060302) [68769.621168] yenta_cardbus 0000:02:04.0: restoring config space at offset 0x4 (was 0x0, writing 0xd0100000) [68769.621174] yenta_cardbus 0000:02:04.0: restoring config space at offset 0x3 (was 0x820000, writing 0x82a800) [68769.621182] yenta_cardbus 0000:02:04.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100007) [68769.621861] PM: early resume of devices complete after 1.634 msecs [68769.671559] ahci 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [68769.671655] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [68769.734052] usb usb2: root hub lost power or was reset [68769.734066] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [68769.794053] usb usb3: root hub lost power or was reset [68769.794066] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 17 (level, low) -> IRQ 17 [68769.854054] usb usb4: root hub lost power or was reset [68769.854068] ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [68769.914048] usb usb5: root hub lost power or was reset [68769.914062] ohci_hcd 0000:00:13.4: PCI INT C -> GSI 17 (level, low) -> IRQ 17 [68769.974047] usb usb6: root hub lost power or was reset [68769.974060] ehci_hcd 0000:00:13.5: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [68769.974068] usb usb1: root hub lost power or was reset [68769.982444] HDA Intel 0000:00:14.2: power state changed by ACPI to D0 [68769.982485] HDA Intel 0000:00:14.2: power state changed by ACPI to D0 [68769.982521] HDA Intel 0000:00:14.2: power state changed by ACPI to D0 [68769.982557] HDA Intel 0000:00:14.2: power state changed by ACPI to D0 [68769.982563] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [68769.982830] [drm] GPU reset succeed (RBBM_STATUS=0x10000140) [68770.071300] [drm] radeon: 1 quad pipes, 1 z pipes initialized. [68770.071321] [drm] radeon: cp idle (0x10000C03) [68770.071334] [drm] radeon: ring at 0x0000000040000000 [68770.071353] [drm] ring test succeeded in 1 usecs [68770.071367] [drm] ib test succeeded in 0 usecs [68770.110052] PM: resume of drv:radeon dev:0000:01:05.0 complete after 127.434 msecs [68770.150512] ata5.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [68770.150515] ata5.00: ACPI cmd ef/03:22:00:00:00:a0 (SET FEATURES) filtered out [68770.190470] ata5.00: configured for MWDMA2 [68770.260045] PM: resume of drv:yenta_cardbus dev:0000:02:04.0 complete after 149.969 msecs [68770.540079] PM: resume of drv:usb dev:usb1 complete after 279.379 msecs [68770.870037] PM: resume of drv:usb dev:usb2 complete after 329.940 msecs [68771.040068] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [68771.041049] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd [68771.049403] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd [68771.049406] ata1.00: configured for UDMA/100 [68771.200027] PM: resume of drv:usb dev:usb3 complete after 329.971 msecs [68771.350040] usb 2-2: reset full speed USB device using ohci_hcd and address 2 [68771.542080] btusb 2-2:1.0: no reset_resume for driver btusb? [68771.542083] btusb 2-2:1.1: no reset_resume for driver btusb? [68771.790113] PM: resume of drv:usb dev:2-2 complete after 588.385 msecs [68771.790158] sd 0:0:0:0: [sda] Starting disk [68772.110039] usb 3-1: reset low speed USB device using ohci_hcd and address 2 [68772.453088] PM: resume of drv:usb dev:3-1 complete after 638.528 msecs [68772.453343] PM: resume of devices complete after 2831.454 msecs [68772.453611] PM: resume devices took 2.830 seconds [68772.453645] PM: Finishing wakeup. [68772.453647] Restarting tasks ... done. [68778.933194] tg3 0000:10:00.0: irq 28 for MSI/MSI-X [68778.980648] ADDRCONF(NETDEV_UP): eth0: link is not ready [68780.555935] tg3: eth0: Link is up at 100 Mbps, full duplex. [68780.555945] tg3: eth0: Flow control is on for TX and on for RX. [68780.556485] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [68791.242532] eth0: no IPv6 routers present [87111.134304] PM: Syncing filesystems ... done. [87111.135065] PM: Preparing system for mem sleep [87111.135068] Freezing user space processes ... (elapsed 0.03 seconds) done. [87111.172642] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [87111.172764] PM: Entering mem sleep [87111.172779] Suspending console(s) (use no_console_suspend to debug) [87111.190096] sd 0:0:0:0: [sda] Synchronizing SCSI cache [87111.198607] sd 0:0:0:0: [sda] Stopping disk [87111.697717] PM: suspend of drv:sd dev:0:0:0:0 complete after 507.624 msecs [87111.698527] btusb_intr_complete: hci0 urb ffff88001fa88e40 failed to resubmit (1) [87111.699534] btusb_bulk_complete: hci0 urb ffff88001fa88a80 failed to resubmit (1) [87111.700528] btusb_bulk_complete: hci0 urb ffff88001fa88240 failed to resubmit (1) [87112.109146] PM: suspend of drv:psmouse dev:serio4 complete after 388.981 msecs [87112.211588] ACPI handle has no context! [87112.340116] HDA Intel 0000:00:14.2: PCI INT A disabled [87112.364946] HDA Intel 0000:00:14.2: power state changed by ACPI to D3 [87112.364955] PM: suspend of drv:HDA Intel dev:0000:00:14.2 complete after 134.885 msecs [87112.365059] ehci_hcd 0000:00:13.5: PCI INT D disabled [87112.365070] ohci_hcd 0000:00:13.4: PCI INT C disabled [87112.365081] ohci_hcd 0000:00:13.3: PCI INT B disabled [87112.365092] ohci_hcd 0000:00:13.2: PCI INT C disabled [87112.365103] ohci_hcd 0000:00:13.1: PCI INT B disabled [87112.365113] ohci_hcd 0000:00:13.0: PCI INT A disabled [87112.380122] ahci 0000:00:12.0: PCI INT A disabled [87112.381625] PM: suspend of devices complete after 1208.530 msecs [87112.381628] PM: suspend devices took 1.210 seconds [87112.400428] PM: late suspend of devices complete after 18.794 msecs [87112.400527] ACPI: Preparing to enter system sleep state S3 [87112.440037] Disabling non-boot CPUs ... [87112.440060] CPU0 attaching NULL sched-domain. [87112.440064] CPU1 attaching NULL sched-domain. [87112.600043] CPU0 attaching NULL sched-domain. [87112.601156] Broke affinity for irq 1 [87112.601170] Broke affinity for irq 9 [87112.601178] Broke affinity for irq 12 [87112.601203] Broke affinity for irq 17 [87112.601217] Broke affinity for irq 23 [87112.601226] Broke affinity for irq 27 [87112.710032] CPU 1 is now offline [87112.710034] SMP alternatives: switching to UP code [87112.716522] Extended CMOS year: 2000 [87112.716522] Back to C! [87112.716522] Extended CMOS year: 2000 [87112.716574] powernow-k8: ph2 null fid transition 0xc [87112.716582] Enabling non-boot CPUs ... [87112.716869] SMP alternatives: switching to SMP code [87112.722480] Booting processor 1 APIC 0x1 ip 0x6000 [87112.715990] Initializing CPU#1 [87112.715990] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [87112.715990] CPU: L2 Cache: 512K (64 bytes/line) [87112.715990] CPU 1/0x1 -> Node 0 [87112.715990] CPU: Physical Processor ID: 0 [87112.715990] CPU: Processor Core ID: 1 [87112.715990] Switch to broadcast mode on CPU1 [87112.880119] CPU1: AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping 01 [87112.880218] CPU0 attaching NULL sched-domain. [87112.950051] CPU0 attaching sched-domain: [87112.950055] domain 0: span 0-1 level MC [87112.950058] groups: 0 1 [87112.950062] CPU1 attaching sched-domain: [87112.950064] domain 0: span 0-1 level MC [87112.950066] groups: 1 0 [87112.950416] CPU1 is up [87112.950555] ACPI: Waking up from system sleep state S3 [87113.300434] pcieport 0000:00:04.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [87113.300438] pcieport 0000:00:04.0: restoring config space at offset 0x8 (was 0x0, writing 0xd000d000) [87113.300441] pcieport 0000:00:04.0: restoring config space at offset 0x7 (was 0x101, writing 0x1f1) [87113.300446] pcieport 0000:00:04.0: restoring config space at offset 0x3 (was 0x10000, writing 0x10010) [87113.300450] pcieport 0000:00:04.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407) [87113.300478] pcieport 0000:00:05.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [87113.300482] pcieport 0000:00:05.0: restoring config space at offset 0x8 (was 0x0, writing 0xcff0cc00) [87113.300485] pcieport 0000:00:05.0: restoring config space at offset 0x7 (was 0x101, writing 0x3121) [87113.300490] pcieport 0000:00:05.0: restoring config space at offset 0x3 (was 0x10000, writing 0x10010) [87113.300494] pcieport 0000:00:05.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407) [87113.300517] pcieport 0000:00:06.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [87113.300521] pcieport 0000:00:06.0: restoring config space at offset 0x8 (was 0x0, writing 0xc800c800) [87113.300524] pcieport 0000:00:06.0: restoring config space at offset 0x7 (was 0x101, writing 0x1f1) [87113.300529] pcieport 0000:00:06.0: restoring config space at offset 0x3 (was 0x10000, writing 0x10010) [87113.300533] pcieport 0000:00:06.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407) [87113.300556] ahci 0000:00:12.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [87113.300575] ahci 0000:00:12.0: restoring config space at offset 0x3 (was 0x0, writing 0x4010) [87113.300580] ahci 0000:00:12.0: restoring config space at offset 0x2 (was 0x1018f00, writing 0x1060100) [87113.300600] ahci 0000:00:12.0: set SATA to AHCI mode [87113.300845] HDA Intel 0000:00:14.2: restoring config space at offset 0xf (was 0x10a, writing 0xa) [87113.300970] radeon 0000:01:05.0: restoring config space at offset 0x1 (was 0x100403, writing 0x100407) [87113.301045] tg3 0000:10:00.0: restoring config space at offset 0xc (was 0x0, writing 0x42000000) [87113.301060] tg3 0000:10:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [87113.301066] tg3 0000:10:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100006) [87113.301105] yenta_cardbus 0000:02:04.0: restoring config space at offset 0xf (was 0x7000100, writing 0x580010a) [87113.301111] yenta_cardbus 0000:02:04.0: restoring config space at offset 0xe (was 0x0, writing 0x14fc) [87113.301117] yenta_cardbus 0000:02:04.0: restoring config space at offset 0xd (was 0x0, writing 0x1400) [87113.301123] yenta_cardbus 0000:02:04.0: restoring config space at offset 0xc (was 0x0, writing 0x10fc) [87113.301129] yenta_cardbus 0000:02:04.0: restoring config space at offset 0xb (was 0x0, writing 0x1000) [87113.301135] yenta_cardbus 0000:02:04.0: restoring config space at offset 0xa (was 0x0, writing 0x4bfff000) [87113.301141] yenta_cardbus 0000:02:04.0: restoring config space at offset 0x9 (was 0x0, writing 0x48000000) [87113.301147] yenta_cardbus 0000:02:04.0: restoring config space at offset 0x8 (was 0x0, writing 0x43fff000) [87113.301153] yenta_cardbus 0000:02:04.0: restoring config space at offset 0x7 (was 0x0, writing 0x40000000) [87113.301159] yenta_cardbus 0000:02:04.0: restoring config space at offset 0x6 (was 0x0, writing 0xb0060302) [87113.301166] yenta_cardbus 0000:02:04.0: restoring config space at offset 0x4 (was 0x0, writing 0xd0100000) [87113.301172] yenta_cardbus 0000:02:04.0: restoring config space at offset 0x3 (was 0x820000, writing 0x82a800) [87113.301180] yenta_cardbus 0000:02:04.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100007) [87113.301857] PM: early resume of devices complete after 1.632 msecs [87113.349477] ahci 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [87113.349570] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [87113.404051] usb usb2: root hub lost power or was reset [87113.404064] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [87113.464052] usb usb3: root hub lost power or was reset [87113.464066] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 17 (level, low) -> IRQ 17 [87113.524051] usb usb4: root hub lost power or was reset [87113.524064] ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [87113.584049] usb usb5: root hub lost power or was reset [87113.584062] ohci_hcd 0000:00:13.4: PCI INT C -> GSI 17 (level, low) -> IRQ 17 [87113.644048] usb usb6: root hub lost power or was reset [87113.644061] ehci_hcd 0000:00:13.5: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [87113.644069] usb usb1: root hub lost power or was reset [87113.652541] HDA Intel 0000:00:14.2: power state changed by ACPI to D0 [87113.652581] HDA Intel 0000:00:14.2: power state changed by ACPI to D0 [87113.652618] HDA Intel 0000:00:14.2: power state changed by ACPI to D0 [87113.652653] HDA Intel 0000:00:14.2: power state changed by ACPI to D0 [87113.652659] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [87113.652926] [drm] GPU reset succeed (RBBM_STATUS=0x10000140) [87113.741300] [drm] radeon: 1 quad pipes, 1 z pipes initialized. [87113.741321] [drm] radeon: cp idle (0x10000C03) [87113.741334] [drm] radeon: ring at 0x0000000040000000 [87113.741353] [drm] ring test succeeded in 1 usecs [87113.741364] [drm] ib test succeeded in 0 usecs [87113.780052] PM: resume of drv:radeon dev:0000:01:05.0 complete after 127.338 msecs [87113.820512] ata5.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [87113.820516] ata5.00: ACPI cmd ef/03:22:00:00:00:a0 (SET FEATURES) filtered out [87113.860469] ata5.00: configured for MWDMA2 [87113.930043] PM: resume of drv:yenta_cardbus dev:0000:02:04.0 complete after 149.969 msecs [87114.210067] PM: resume of drv:usb dev:usb1 complete after 279.378 msecs [87114.540055] PM: resume of drv:usb dev:usb2 complete after 329.970 msecs [87114.770054] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [87114.771035] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd [87114.779996] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd [87114.779998] ata1.00: configured for UDMA/100 [87114.870042] PM: resume of drv:usb dev:usb3 complete after 329.969 msecs [87115.020040] usb 2-2: reset full speed USB device using ohci_hcd and address 2 [87115.212074] btusb 2-2:1.0: no reset_resume for driver btusb? [87115.212077] btusb 2-2:1.1: no reset_resume for driver btusb? [87115.460116] PM: resume of drv:usb dev:2-2 complete after 588.373 msecs [87115.460160] sd 0:0:0:0: [sda] Starting disk [87115.770040] usb 3-1: reset low speed USB device using ohci_hcd and address 2 [87116.113088] PM: resume of drv:usb dev:3-1 complete after 634.612 msecs [87116.113341] PM: resume of devices complete after 2811.456 msecs [87116.113602] PM: resume devices took 2.810 seconds [87116.113635] PM: Finishing wakeup. [87116.113637] Restarting tasks ... done. [87119.093144] tg3 0000:10:00.0: irq 28 for MSI/MSI-X [87119.125378] ADDRCONF(NETDEV_UP): eth0: link is not ready [87120.715980] tg3: eth0: Link is up at 100 Mbps, full duplex. [87120.715990] tg3: eth0: Flow control is on for TX and on for RX. [87120.716508] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [87130.792557] eth0: no IPv6 routers present [101658.946599] PM: Syncing filesystems ... done. [101658.947226] PM: Preparing system for mem sleep [101658.947230] Freezing user space processes ... (elapsed 0.28 seconds) done. [101659.227399] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [101659.227512] PM: Entering mem sleep [101659.227526] Suspending console(s) (use no_console_suspend to debug) [101659.250095] sd 0:0:0:0: [sda] Synchronizing SCSI cache [101659.250277] sd 0:0:0:0: [sda] Stopping disk [101659.747039] PM: suspend of drv:sd dev:0:0:0:0 complete after 496.947 msecs [101659.747980] btusb_intr_complete: hci0 urb ffff88002d9ef900 failed to resubmit (1) [101659.748985] btusb_bulk_complete: hci0 urb ffff88002d9efb40 failed to resubmit (1) [101659.749979] btusb_bulk_complete: hci0 urb ffff88000bc77cc0 failed to resubmit (1) [101660.160391] PM: suspend of drv:psmouse dev:serio4 complete after 390.227 msecs [101660.261593] ACPI handle has no context! [101660.390124] HDA Intel 0000:00:14.2: PCI INT A disabled [101660.415140] HDA Intel 0000:00:14.2: power state changed by ACPI to D3 [101660.415150] PM: suspend of drv:HDA Intel dev:0000:00:14.2 complete after 135.080 msecs [101660.415255] ehci_hcd 0000:00:13.5: PCI INT D disabled [101660.415267] ohci_hcd 0000:00:13.4: PCI INT C disabled [101660.415278] ohci_hcd 0000:00:13.3: PCI INT B disabled [101660.415288] ohci_hcd 0000:00:13.2: PCI INT C disabled [101660.415299] ohci_hcd 0000:00:13.1: PCI INT B disabled [101660.415310] ohci_hcd 0000:00:13.0: PCI INT A disabled [101660.430124] ahci 0000:00:12.0: PCI INT A disabled [101660.431926] PM: suspend of devices complete after 1204.087 msecs [101660.431930] PM: suspend devices took 1.210 seconds [101660.450428] PM: late suspend of devices complete after 18.493 msecs [101660.450531] ACPI: Preparing to enter system sleep state S3 [101660.490034] Disabling non-boot CPUs ... [101660.490057] CPU0 attaching NULL sched-domain. [101660.490061] CPU1 attaching NULL sched-domain. [101660.650043] CPU0 attaching NULL sched-domain. [101660.651154] Broke affinity for irq 1 [101660.651168] Broke affinity for irq 9 [101660.651199] Broke affinity for irq 23 [101660.651209] Broke affinity for irq 27 [101660.760032] CPU 1 is now offline [101660.760034] SMP alternatives: switching to UP code [101660.766582] Extended CMOS year: 2000 [101660.766582] Back to C! [101660.766582] Extended CMOS year: 2000 [101660.766634] powernow-k8: ph2 null fid transition 0xc [101660.766642] Enabling non-boot CPUs ... [101660.766927] SMP alternatives: switching to SMP code [101660.772538] Booting processor 1 APIC 0x1 ip 0x6000 [101660.765981] Initializing CPU#1 [101660.765981] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [101660.765981] CPU: L2 Cache: 512K (64 bytes/line) [101660.765981] CPU 1/0x1 -> Node 0 [101660.765981] CPU: Physical Processor ID: 0 [101660.765981] CPU: Processor Core ID: 1 [101660.765981] Switch to broadcast mode on CPU1 [101660.930066] CPU1: AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping 01 [101660.930168] CPU0 attaching NULL sched-domain. [101661.000055] CPU0 attaching sched-domain: [101661.000059] domain 0: span 0-1 level MC [101661.000062] groups: 0 1 [101661.000066] CPU1 attaching sched-domain: [101661.000068] domain 0: span 0-1 level MC [101661.000070] groups: 1 0 [101661.000421] CPU1 is up [101661.000560] ACPI: Waking up from system sleep state S3 [101661.340431] pcieport 0000:00:04.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [101661.340435] pcieport 0000:00:04.0: restoring config space at offset 0x8 (was 0x0, writing 0xd000d000) [101661.340439] pcieport 0000:00:04.0: restoring config space at offset 0x7 (was 0x101, writing 0x1f1) [101661.340444] pcieport 0000:00:04.0: restoring config space at offset 0x3 (was 0x10000, writing 0x10010) [101661.340448] pcieport 0000:00:04.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407) [101661.340476] pcieport 0000:00:05.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [101661.340479] pcieport 0000:00:05.0: restoring config space at offset 0x8 (was 0x0, writing 0xcff0cc00) [101661.340483] pcieport 0000:00:05.0: restoring config space at offset 0x7 (was 0x101, writing 0x3121) [101661.340488] pcieport 0000:00:05.0: restoring config space at offset 0x3 (was 0x10000, writing 0x10010) [101661.340491] pcieport 0000:00:05.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407) [101661.340515] pcieport 0000:00:06.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [101661.340518] pcieport 0000:00:06.0: restoring config space at offset 0x8 (was 0x0, writing 0xc800c800) [101661.340522] pcieport 0000:00:06.0: restoring config space at offset 0x7 (was 0x101, writing 0x1f1) [101661.340526] pcieport 0000:00:06.0: restoring config space at offset 0x3 (was 0x10000, writing 0x10010) [101661.340530] pcieport 0000:00:06.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407) [101661.340554] ahci 0000:00:12.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [101661.340573] ahci 0000:00:12.0: restoring config space at offset 0x3 (was 0x0, writing 0x4010) [101661.340578] ahci 0000:00:12.0: restoring config space at offset 0x2 (was 0x1018f00, writing 0x1060100) [101661.340597] ahci 0000:00:12.0: set SATA to AHCI mode [101661.340844] HDA Intel 0000:00:14.2: restoring config space at offset 0xf (was 0x10a, writing 0xa) [101661.340968] radeon 0000:01:05.0: restoring config space at offset 0x1 (was 0x100403, writing 0x100407) [101661.341043] tg3 0000:10:00.0: restoring config space at offset 0xc (was 0x0, writing 0x42000000) [101661.341058] tg3 0000:10:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [101661.341064] tg3 0000:10:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100006) [101661.341104] yenta_cardbus 0000:02:04.0: restoring config space at offset 0xf (was 0x7000100, writing 0x580010a) [101661.341110] yenta_cardbus 0000:02:04.0: restoring config space at offset 0xe (was 0x0, writing 0x14fc) [101661.341116] yenta_cardbus 0000:02:04.0: restoring config space at offset 0xd (was 0x0, writing 0x1400) [101661.341122] yenta_cardbus 0000:02:04.0: restoring config space at offset 0xc (was 0x0, writing 0x10fc) [101661.341128] yenta_cardbus 0000:02:04.0: restoring config space at offset 0xb (was 0x0, writing 0x1000) [101661.341134] yenta_cardbus 0000:02:04.0: restoring config space at offset 0xa (was 0x0, writing 0x4bfff000) [101661.341140] yenta_cardbus 0000:02:04.0: restoring config space at offset 0x9 (was 0x0, writing 0x48000000) [101661.341146] yenta_cardbus 0000:02:04.0: restoring config space at offset 0x8 (was 0x0, writing 0x43fff000) [101661.341152] yenta_cardbus 0000:02:04.0: restoring config space at offset 0x7 (was 0x0, writing 0x40000000) [101661.341158] yenta_cardbus 0000:02:04.0: restoring config space at offset 0x6 (was 0x0, writing 0xb0060302) [101661.341165] yenta_cardbus 0000:02:04.0: restoring config space at offset 0x4 (was 0x0, writing 0xd0100000) [101661.341171] yenta_cardbus 0000:02:04.0: restoring config space at offset 0x3 (was 0x820000, writing 0x82a800) [101661.341179] yenta_cardbus 0000:02:04.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100007) [101661.341858] PM: early resume of devices complete after 1.636 msecs [101661.389986] ahci 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [101661.390106] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [101661.454052] usb usb2: root hub lost power or was reset [101661.454066] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [101661.514053] usb usb3: root hub lost power or was reset [101661.514067] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 17 (level, low) -> IRQ 17 [101661.574050] usb usb4: root hub lost power or was reset [101661.574063] ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [101661.634048] usb usb5: root hub lost power or was reset [101661.634061] ohci_hcd 0000:00:13.4: PCI INT C -> GSI 17 (level, low) -> IRQ 17 [101661.694047] usb usb6: root hub lost power or was reset [101661.694060] ehci_hcd 0000:00:13.5: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [101661.694068] usb usb1: root hub lost power or was reset [101661.702299] HDA Intel 0000:00:14.2: power state changed by ACPI to D0 [101661.702339] HDA Intel 0000:00:14.2: power state changed by ACPI to D0 [101661.702376] HDA Intel 0000:00:14.2: power state changed by ACPI to D0 [101661.702411] HDA Intel 0000:00:14.2: power state changed by ACPI to D0 [101661.702417] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [101661.702685] [drm] GPU reset succeed (RBBM_STATUS=0x10000140) [101661.791317] [drm] radeon: 1 quad pipes, 1 z pipes initialized. [101661.791337] [drm] radeon: cp idle (0x10000C03) [101661.791350] [drm] radeon: ring at 0x0000000040000000 [101661.791369] [drm] ring test succeeded in 1 usecs [101661.791382] [drm] ib test succeeded in 0 usecs [101661.830051] PM: resume of drv:radeon dev:0000:01:05.0 complete after 127.579 msecs [101661.870516] ata5.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [101661.870520] ata5.00: ACPI cmd ef/03:22:00:00:00:a0 (SET FEATURES) filtered out [101661.910470] ata5.00: configured for MWDMA2 [101661.980044] PM: resume of drv:yenta_cardbus dev:0000:02:04.0 complete after 149.968 msecs [101662.260062] PM: resume of drv:usb dev:usb1 complete after 279.365 msecs [101662.590037] PM: resume of drv:usb dev:usb2 complete after 329.955 msecs [101662.820052] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [101662.821033] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd [101662.825445] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd [101662.825448] ata1.00: configured for UDMA/100 [101662.920041] PM: resume of drv:usb dev:usb3 complete after 329.986 msecs [101663.070039] usb 2-2: reset full speed USB device using ohci_hcd and address 2 [101663.262074] btusb 2-2:1.0: no reset_resume for driver btusb? [101663.262076] btusb 2-2:1.1: no reset_resume for driver btusb? [101663.510114] PM: resume of drv:usb dev:2-2 complete after 588.370 msecs [101663.510159] sd 0:0:0:0: [sda] Starting disk [101663.830036] usb 3-1: reset low speed USB device using ohci_hcd and address 2 [101664.173087] PM: resume of drv:usb dev:3-1 complete after 638.052 msecs [101664.173341] PM: resume of devices complete after 2831.456 msecs [101664.173604] PM: resume devices took 2.830 seconds [101664.173638] PM: Finishing wakeup. [101664.173640] Restarting tasks ... done. [101668.099725] tg3 0000:10:00.0: irq 28 for MSI/MSI-X [101668.132828] ADDRCONF(NETDEV_UP): eth0: link is not ready [101669.865562] tg3: eth0: Link is up at 100 Mbps, full duplex. [101669.865574] tg3: eth0: Flow control is on for TX and on for RX. [101669.866133] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [101680.592534] eth0: no IPv6 routers present [102306.100065] usb 1-1: new high speed USB device using ehci_hcd and address 4 [102306.260947] usb 1-1: configuration #1 chosen from 1 choice [102307.122361] Initializing USB Mass Storage driver... [102307.123398] scsi6 : SCSI emulation for USB Mass Storage devices [102307.123708] usbcore: registered new interface driver usb-storage [102307.123718] USB Mass Storage support registered. [102307.128391] usb-storage: device found at 4 [102307.128399] usb-storage: waiting for device to settle before scanning [102312.120419] usb-storage: device scan complete [102312.134312] scsi 6:0:0:0: Direct-Access JetFlash TS4GJFV30 8.07 PQ: 0 ANSI: 2 [102312.135716] sd 6:0:0:0: Attached scsi generic sg2 type 0 [102312.144795] sd 6:0:0:0: [sdb] 7987198 512-byte logical blocks: (4.08 GB/3.80 GiB) [102312.145392] sd 6:0:0:0: [sdb] Write Protect is off [102312.145400] sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00 [102312.145407] sd 6:0:0:0: [sdb] Assuming drive cache: write through [102312.148444] sd 6:0:0:0: [sdb] Assuming drive cache: write through [102312.148465] sdb: sdb1 [102312.153144] sd 6:0:0:0: [sdb] Assuming drive cache: write through [102312.153159] sd 6:0:0:0: [sdb] Attached SCSI removable disk [102468.508336] lo: Disabled Privacy Extensions [102474.160134] usb 1-1: USB disconnect, address 4 [102475.230104] usb 1-1: new high speed USB device using ehci_hcd and address 5 [102475.389993] usb 1-1: configuration #1 chosen from 1 choice [102475.392222] scsi7 : SCSI emulation for USB Mass Storage devices [102475.393353] usb-storage: device found at 5 [102475.393358] usb-storage: waiting for device to settle before scanning [102480.392896] usb-storage: device scan complete [102481.025996] scsi 7:0:0:0: Direct-Access JetFlash TS4GJFV30 8.07 PQ: 0 ANSI: 2 [102481.027513] sd 7:0:0:0: Attached scsi generic sg2 type 0 [102481.039008] sd 7:0:0:0: [sdb] 7987198 512-byte logical blocks: (4.08 GB/3.80 GiB) [102481.039710] sd 7:0:0:0: [sdb] Write Protect is off [102481.039719] sd 7:0:0:0: [sdb] Mode Sense: 03 00 00 00 [102481.039726] sd 7:0:0:0: [sdb] Assuming drive cache: write through [102481.042424] sd 7:0:0:0: [sdb] Assuming drive cache: write through [102481.042439] sdb: sdb1 [102481.047909] sd 7:0:0:0: [sdb] Assuming drive cache: write through [102481.047926] sd 7:0:0:0: [sdb] Attached SCSI removable disk [105498.482410] usb 1-1: USB disconnect, address 5 [107130.183144] chrome[11658] general protection ip:7f5ef3fd4ca1 sp:7fffdd46d8d0 error:0 in libflashplayer.so[7f5ef3d9e000+8d2000] [109875.180292] type=1505 audit(1289840505.182:16): operation="profile_replace" pid=12824 name="/usr/lib/cups/backend/cups-pdf" [109875.180791] type=1505 audit(1289840505.182:17): operation="profile_replace" pid=12824 name="/usr/sbin/cupsd" [111623.030113] usb 1-1: new high speed USB device using ehci_hcd and address 6 [111623.193592] usb 1-1: configuration #1 chosen from 1 choice [111623.198691] scsi8 : SCSI emulation for USB Mass Storage devices [111623.198935] usb-storage: device found at 6 [111623.198944] usb-storage: waiting for device to settle before scanning [111628.193821] usb-storage: device scan complete [111628.195740] scsi 8:0:0:0: Direct-Access HTC Android Phone 0100 PQ: 0 ANSI: 2 [111628.197557] sd 8:0:0:0: Attached scsi generic sg2 type 0 [111628.231481] sd 8:0:0:0: [sdb] Attached SCSI removable disk [111630.999084] sd 8:0:0:0: [sdb] 15548416 512-byte logical blocks: (7.96 GB/7.41 GiB) [111631.001058] sd 8:0:0:0: [sdb] Assuming drive cache: write through [111631.007118] sd 8:0:0:0: [sdb] Assuming drive cache: write through [111631.007143] sdb: sdb1