[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.35-20-generic (buildd@crested) (gcc version 4.4.5 20100824 (prerelease) (Ubuntu/Linaro 4.4.4-9ubuntu2) ) #29-Ubuntu SMP Fri Sep 3 14:55:28 UTC 2010 (Ubuntu 2.6.35-20.29-generic 2.6.35.4) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-20-generic root=UUID=bc817780-86cd-4344-93cb-92a975200631 ro vga=788 quiet splash [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable) [ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000796a1000 (usable) [ 0.000000] BIOS-e820: 00000000796a1000 - 00000000796a7000 (reserved) [ 0.000000] BIOS-e820: 00000000796a7000 - 00000000797b7000 (usable) [ 0.000000] BIOS-e820: 00000000797b7000 - 000000007980f000 (reserved) [ 0.000000] BIOS-e820: 000000007980f000 - 00000000798c7000 (usable) [ 0.000000] BIOS-e820: 00000000798c7000 - 00000000798d2000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000798d2000 - 00000000798d5000 (ACPI data) [ 0.000000] BIOS-e820: 00000000798d5000 - 00000000798d9000 (reserved) [ 0.000000] BIOS-e820: 00000000798d9000 - 00000000798dd000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000798dd000 - 00000000798e0000 (reserved) [ 0.000000] BIOS-e820: 00000000798e0000 - 0000000079907000 (ACPI NVS) [ 0.000000] BIOS-e820: 0000000079907000 - 0000000079908000 (ACPI data) [ 0.000000] BIOS-e820: 0000000079908000 - 0000000079b0f000 (reserved) [ 0.000000] BIOS-e820: 0000000079b0f000 - 0000000079b9f000 (ACPI NVS) [ 0.000000] BIOS-e820: 0000000079b9f000 - 0000000079bff000 (ACPI data) [ 0.000000] BIOS-e820: 0000000079bff000 - 0000000079c00000 (usable) [ 0.000000] BIOS-e820: 0000000079c00000 - 000000007c000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved) [ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI present. [ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x79c00 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-D3FFF write-protect [ 0.000000] D4000-DBFFF uncachable [ 0.000000] DC000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 07D000000 mask FFF000000 uncachable [ 0.000000] 1 base 07E000000 mask FFE000000 uncachable [ 0.000000] 2 base 000000000 mask F80000000 write-back [ 0.000000] 3 base 079E00000 mask FFFE00000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 0000000079e00000 - 000000007a000000 (usable) ==> (reserved) [ 0.000000] e820 update range: 0000000000001000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009ec00 (usable) [ 0.000000] modified: 000000000009ec00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000796a1000 (usable) [ 0.000000] modified: 00000000796a1000 - 00000000796a7000 (reserved) [ 0.000000] modified: 00000000796a7000 - 00000000797b7000 (usable) [ 0.000000] modified: 00000000797b7000 - 000000007980f000 (reserved) [ 0.000000] modified: 000000007980f000 - 00000000798c7000 (usable) [ 0.000000] modified: 00000000798c7000 - 00000000798d2000 (ACPI NVS) [ 0.000000] modified: 00000000798d2000 - 00000000798d5000 (ACPI data) [ 0.000000] modified: 00000000798d5000 - 00000000798d9000 (reserved) [ 0.000000] modified: 00000000798d9000 - 00000000798dd000 (ACPI NVS) [ 0.000000] modified: 00000000798dd000 - 00000000798e0000 (reserved) [ 0.000000] modified: 00000000798e0000 - 0000000079907000 (ACPI NVS) [ 0.000000] modified: 0000000079907000 - 0000000079908000 (ACPI data) [ 0.000000] modified: 0000000079908000 - 0000000079b0f000 (reserved) [ 0.000000] modified: 0000000079b0f000 - 0000000079b9f000 (ACPI NVS) [ 0.000000] modified: 0000000079b9f000 - 0000000079bff000 (ACPI data) [ 0.000000] modified: 0000000079bff000 - 0000000079c00000 (usable) [ 0.000000] modified: 0000000079c00000 - 000000007c000000 (reserved) [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] modified: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] modified: 00000000fed10000 - 00000000fed14000 (reserved) [ 0.000000] modified: 00000000fed18000 - 00000000fed1a000 (reserved) [ 0.000000] modified: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ff800000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] found SMP MP-table at [ffff8800000f6480] f6480 [ 0.000000] init_memory_mapping: 0000000000000000-0000000079c00000 [ 0.000000] 0000000000 - 0079c00000 page 2M [ 0.000000] kernel direct mapping tables up to 79c00000 @ 16000-19000 [ 0.000000] RAMDISK: 37572000 - 37ff0000 [ 0.000000] ACPI: RSDP 00000000000f6440 00024 (v02 LENOVO) [ 0.000000] ACPI: XSDT 0000000079b49b7a 00094 (v01 LENOVO TP-7U 00003160 LTP 00000000) [ 0.000000] ACPI: FACP 0000000079b49d00 000F4 (v03 LENOVO TP-7U 00003160 LNVO 00000001) [ 0.000000] ACPI: DSDT 0000000079b4a10e 0FAC1 (v01 LENOVO TP-7U 00003160 MSFT 03000000) [ 0.000000] ACPI: FACS 0000000079b8e000 00040 [ 0.000000] ACPI: SSDT 0000000079b49eb4 0025A (v01 LENOVO TP-7U 00003160 MSFT 03000000) [ 0.000000] ACPI: ECDT 0000000079b59bcf 00052 (v01 LENOVO TP-7U 00003160 LNVO 00000001) [ 0.000000] ACPI: APIC 0000000079b59c21 00078 (v01 LENOVO TP-7U 00003160 LNVO 00000001) [ 0.000000] ACPI: MCFG 0000000079b59c99 0003C (v01 LENOVO TP-7U 00003160 LNVO 00000001) [ 0.000000] ACPI: HPET 0000000079b59cd5 00038 (v01 LENOVO TP-7U 00003160 LNVO 00000001) [ 0.000000] ACPI: SLIC 0000000079b59dc2 00176 (v01 LENOVO TP-7U 00003160 LTP 00000000) [ 0.000000] ACPI: BOOT 0000000079b59f38 00028 (v01 LENOVO TP-7U 00003160 LTP 00000001) [ 0.000000] ACPI: ASF! 0000000079b59f60 000A0 (v16 LENOVO TP-7U 00003160 PTL 00000001) [ 0.000000] ACPI: SSDT 0000000079b8d1fa 00568 (v01 LENOVO TP-7U 00003160 INTL 20050513) [ 0.000000] ACPI: TCPA 0000000079907000 00032 (v00 00000000 00000000) [ 0.000000] ACPI: SSDT 00000000798d4000 00655 (v01 PmRef CpuPm 00003000 INTL 20050624) [ 0.000000] ACPI: SSDT 00000000798d3000 00274 (v01 PmRef Cpu0Tst 00003000 INTL 20050624) [ 0.000000] ACPI: SSDT 00000000798d2000 00242 (v01 PmRef ApTst 00003000 INTL 20050624) [ 0.000000] ACPI: DMI detected: Lenovo ThinkPad T400 [ 0.000000] ACPI: Added _OSI(Linux) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000079c00000 [ 0.000000] Initmem setup node 0 0000000000000000-0000000079c00000 [ 0.000000] NODE_DATA [0000000001d18180 - 0000000001d1d17f] [ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880002600000-ffff8800041fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal empty [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[5] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009e [ 0.000000] 0: 0x00000100 -> 0x000796a1 [ 0.000000] 0: 0x000796a7 -> 0x000797b7 [ 0.000000] 0: 0x0007980f -> 0x000798c7 [ 0.000000] 0: 0x00079bff -> 0x00079c00 [ 0.000000] On node 0 totalpages: 497656 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3926 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 6762 pages used for memmap [ 0.000000] DMA32 zone: 486912 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] early_res array is doubled to 64 at [17000 - 177ff] [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000 [ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000796a1000 - 00000000796a7000 [ 0.000000] PM: Registered nosave memory: 00000000797b7000 - 000000007980f000 [ 0.000000] PM: Registered nosave memory: 00000000798c7000 - 00000000798d2000 [ 0.000000] PM: Registered nosave memory: 00000000798d2000 - 00000000798d5000 [ 0.000000] PM: Registered nosave memory: 00000000798d5000 - 00000000798d9000 [ 0.000000] PM: Registered nosave memory: 00000000798d9000 - 00000000798dd000 [ 0.000000] PM: Registered nosave memory: 00000000798dd000 - 00000000798e0000 [ 0.000000] PM: Registered nosave memory: 00000000798e0000 - 0000000079907000 [ 0.000000] PM: Registered nosave memory: 0000000079907000 - 0000000079908000 [ 0.000000] PM: Registered nosave memory: 0000000079908000 - 0000000079b0f000 [ 0.000000] PM: Registered nosave memory: 0000000079b0f000 - 0000000079b9f000 [ 0.000000] PM: Registered nosave memory: 0000000079b9f000 - 0000000079bff000 [ 0.000000] Allocating PCI resources starting at 7c000000 (gap: 7c000000:64000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] early_res array is doubled to 128 at [17800 - 187ff] [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880001e00000 s91520 r8192 d23168 u524288 [ 0.000000] pcpu-alloc: s91520 r8192 d23168 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 490838 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-20-generic root=UUID=bc817780-86cd-4344-93cb-92a975200631 ro vga=788 quiet splash [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Subtract (71 early reservations) [ 0.000000] #1 [0001000000 - 0001d17114] TEXT DATA BSS [ 0.000000] #2 [0037572000 - 0037ff0000] RAMDISK [ 0.000000] #3 [0001d18000 - 0001d1814c] BRK [ 0.000000] #4 [00000f6490 - 0000100000] BIOS reserved [ 0.000000] #5 [00000f6480 - 00000f6490] MP-table mpf [ 0.000000] #6 [000009ec00 - 000009f171] BIOS reserved [ 0.000000] #7 [000009f27d - 00000f6480] BIOS reserved [ 0.000000] #8 [000009f171 - 000009f27d] MP-table mpc [ 0.000000] #9 [0000010000 - 0000012000] TRAMPOLINE [ 0.000000] #10 [0000012000 - 0000016000] ACPI WAKEUP [ 0.000000] #11 [0000016000 - 0000017000] PGTABLE [ 0.000000] #12 [0001d18180 - 0001d1d180] NODE_DATA [ 0.000000] #13 [0001d1d180 - 0001d1e180] BOOTMEM [ 0.000000] #14 [0001d17140 - 0001d172c0] BOOTMEM [ 0.000000] #15 [000251f000 - 0002520000] BOOTMEM [ 0.000000] #16 [0002520000 - 0002521000] BOOTMEM [ 0.000000] #17 [0002600000 - 0004200000] MEMMAP 0 [ 0.000000] #18 [0001d172c0 - 0001d17440] BOOTMEM [ 0.000000] #19 [0001d1e180 - 0001d2a180] BOOTMEM [ 0.000000] #20 [0001d2b000 - 0001d2c000] BOOTMEM [ 0.000000] #21 [0001d17440 - 0001d17481] BOOTMEM [ 0.000000] #22 [0001d174c0 - 0001d17503] BOOTMEM [ 0.000000] #23 [0001d17540 - 0001d17b98] BOOTMEM [ 0.000000] #24 [0001d17bc0 - 0001d17c28] BOOTMEM [ 0.000000] #25 [0001d17c40 - 0001d17ca8] BOOTMEM [ 0.000000] #26 [0001d17cc0 - 0001d17d28] BOOTMEM [ 0.000000] #27 [0001d17d40 - 0001d17da8] BOOTMEM [ 0.000000] #28 [0001d17dc0 - 0001d17e28] BOOTMEM [ 0.000000] #29 [0001d17e40 - 0001d17ea8] BOOTMEM [ 0.000000] #30 [0001d17ec0 - 0001d17f28] BOOTMEM [ 0.000000] #31 [0001d17f40 - 0001d17fa8] BOOTMEM [ 0.000000] #32 [0001d2a180 - 0001d2a1e8] BOOTMEM [ 0.000000] #33 [0001d2a200 - 0001d2a268] BOOTMEM [ 0.000000] #34 [0001d2a280 - 0001d2a2e8] BOOTMEM [ 0.000000] #35 [0001d2a300 - 0001d2a368] BOOTMEM [ 0.000000] #36 [0001d2a380 - 0001d2a3e8] BOOTMEM [ 0.000000] #37 [0001d2a400 - 0001d2a468] BOOTMEM [ 0.000000] #38 [0001d2a480 - 0001d2a4e8] BOOTMEM [ 0.000000] #39 [0001d2a500 - 0001d2a568] BOOTMEM [ 0.000000] #40 [0001d2a580 - 0001d2a5e8] BOOTMEM [ 0.000000] #41 [0001d2a600 - 0001d2a668] BOOTMEM [ 0.000000] #42 [0001d2a680 - 0001d2a6e8] BOOTMEM [ 0.000000] #43 [0001d2a700 - 0001d2a768] BOOTMEM [ 0.000000] #44 [0001d2a780 - 0001d2a7e8] BOOTMEM [ 0.000000] #45 [0001d2a800 - 0001d2a868] BOOTMEM [ 0.000000] #46 [0001d2a880 - 0001d2a8e8] BOOTMEM [ 0.000000] #47 [0001d2a900 - 0001d2a968] BOOTMEM [ 0.000000] #48 [0001d2a980 - 0001d2a9e8] BOOTMEM [ 0.000000] #49 [0001d2aa00 - 0001d2aa68] BOOTMEM [ 0.000000] #50 [0001d2aa80 - 0001d2aae8] BOOTMEM [ 0.000000] #51 [0001d2ab00 - 0001d2ab68] BOOTMEM [ 0.000000] #52 [0001d17fc0 - 0001d17fe0] BOOTMEM [ 0.000000] #53 [0001d2ab80 - 0001d2aba0] BOOTMEM [ 0.000000] #54 [0001d2abc0 - 0001d2abe0] BOOTMEM [ 0.000000] #55 [0001d2ac00 - 0001d2ac20] BOOTMEM [ 0.000000] #56 [0001d2ac40 - 0001d2acb2] BOOTMEM [ 0.000000] #57 [0001d2acc0 - 0001d2ad32] BOOTMEM [ 0.000000] #58 [0001e00000 - 0001e1e000] BOOTMEM [ 0.000000] #59 [0001e80000 - 0001e9e000] BOOTMEM [ 0.000000] #60 [0001f00000 - 0001f1e000] BOOTMEM [ 0.000000] #61 [0001f80000 - 0001f9e000] BOOTMEM [ 0.000000] #62 [0001d2ad40 - 0001d2ad48] BOOTMEM [ 0.000000] #63 [0001d2ad80 - 0001d2ad88] BOOTMEM [ 0.000000] #64 [0001d2adc0 - 0001d2add0] BOOTMEM [ 0.000000] #65 [0001d2ae00 - 0001d2ae20] BOOTMEM [ 0.000000] #66 [0001d2ae40 - 0001d2af70] BOOTMEM [ 0.000000] #67 [0001d2af80 - 0001d2afd0] BOOTMEM [ 0.000000] #68 [0001d2e000 - 0001d2e050] BOOTMEM [ 0.000000] #69 [0001d2e080 - 0001d36080] BOOTMEM [ 0.000000] #70 [0001d2c000 - 0001d2c240] BOOTMEM [ 0.000000] Memory: 1937164k/1994752k available (5707k kernel code, 4128k absent, 53460k reserved, 5383k data, 908k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] Verbose stalled-CPUs detection is disabled. [ 0.000000] NR_IRQS:4352 nr_irqs:712 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 20971520 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2393.788 MHz processor. [ 0.010018] Calibrating delay loop (skipped), value calculated using timer frequency.. 4787.57 BogoMIPS (lpj=23937880) [ 0.010029] pid_max: default: 32768 minimum: 301 [ 0.010084] Security Framework initialized [ 0.010127] AppArmor: AppArmor initialized [ 0.010132] Yama: becoming mindful. [ 0.010752] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.012643] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.013441] Mount-cache hash table entries: 256 [ 0.013723] Initializing cgroup subsys ns [ 0.013734] Initializing cgroup subsys cpuacct [ 0.013744] Initializing cgroup subsys memory [ 0.013762] Initializing cgroup subsys devices [ 0.013768] Initializing cgroup subsys freezer [ 0.013773] Initializing cgroup subsys net_cls [ 0.013841] CPU: Physical Processor ID: 0 [ 0.013846] CPU: Processor Core ID: 0 [ 0.013851] mce: CPU supports 6 MCE banks [ 0.013870] CPU0: Thermal monitoring enabled (TM2) [ 0.013879] using mwait in idle threads. [ 0.013884] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver. [ 0.013901] ... version: 2 [ 0.013906] ... bit width: 40 [ 0.013910] ... generic registers: 2 [ 0.013914] ... value mask: 000000ffffffffff [ 0.013919] ... max period: 000000007fffffff [ 0.013923] ... fixed-purpose events: 3 [ 0.013928] ... event mask: 0000000700000003 [ 0.026297] ACPI: Core revision 20100428 [ 0.070029] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.070042] ftrace: allocating 22669 entries in 89 pages [ 0.080105] Setting APIC routing to flat [ 0.080548] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.184834] CPU0: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz stepping 0a [ 0.190000] Booting Node 0, Processors #1 [ 0.350032] Brought up 2 CPUs [ 0.350039] Total of 2 processors activated (9575.64 BogoMIPS). [ 0.351590] devtmpfs: initialized [ 0.351868] regulator: core version 0.5 [ 0.351920] Time: 15:54:53 Date: 09/13/10 [ 0.352012] NET: Registered protocol family 16 [ 0.352063] Trying to unpack rootfs image as initramfs... [ 0.352319] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.352326] ACPI: bus type pci registered [ 0.352487] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) [ 0.352496] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820 [ 0.397737] PCI: Using configuration type 1 for base access [ 0.410131] bio: create slab at 0 [ 0.416445] ACPI: EC: EC description table is found, configuring boot EC [ 0.440260] ACPI: BIOS _OSI(Linux) query honored via DMI [ 0.465562] ACPI: SSDT 00000000798d7c20 002C8 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) [ 0.467290] ACPI: Dynamic OEM Table Load: [ 0.467299] ACPI: SSDT (null) 002C8 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) [ 0.468118] ACPI: SSDT 00000000798d5020 0087A (v01 PmRef Cpu0Cst 00003001 INTL 20050624) [ 0.470779] ACPI: Dynamic OEM Table Load: [ 0.470788] ACPI: SSDT (null) 0087A (v01 PmRef Cpu0Cst 00003001 INTL 20050624) [ 0.472122] ACPI: SSDT 00000000798d6ca0 001CF (v01 PmRef ApIst 00003000 INTL 20050624) [ 0.473881] ACPI: Dynamic OEM Table Load: [ 0.473889] ACPI: SSDT (null) 001CF (v01 PmRef ApIst 00003000 INTL 20050624) [ 0.474314] ACPI: SSDT 00000000798d6f20 0008D (v01 PmRef ApCst 00003000 INTL 20050624) [ 0.476046] ACPI: Dynamic OEM Table Load: [ 0.476054] ACPI: SSDT (null) 0008D (v01 PmRef ApCst 00003000 INTL 20050624) [ 0.476469] ACPI: Interpreter enabled [ 0.476475] ACPI: (supports S0 S3 S4 S5) [ 0.476538] ACPI: Using IOAPIC for interrupt routing [ 0.533699] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62 [ 0.534102] ACPI: Power Resource [PUBS] (on) [ 0.536810] ACPI: ACPI Dock Station Driver: 3 docks/bays found [ 0.536810] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.540659] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.540803] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 0.540811] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 0.540818] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.540827] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] [ 0.540833] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] [ 0.540842] pci_root PNP0A08:00: host bridge window [mem 0x7c000000-0xfebfffff] [ 0.540978] pci 0000:00:02.0: reg 10: [mem 0xf4400000-0xf47fffff 64bit] [ 0.540994] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.541006] pci 0000:00:02.0: reg 20: [io 0x1800-0x1807] [ 0.541094] pci 0000:00:02.1: reg 10: [mem 0xf4200000-0xf42fffff 64bit] [ 0.541210] pci 0000:00:03.0: reg 10: [mem 0xfc226800-0xfc22680f 64bit] [ 0.541277] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.541285] pci 0000:00:03.0: PME# disabled [ 0.541342] pci 0000:00:03.3: reg 10: [io 0x1830-0x1837] [ 0.541353] pci 0000:00:03.3: reg 14: [mem 0xfc024000-0xfc024fff] [ 0.541545] pci 0000:00:19.0: reg 10: [mem 0xfc000000-0xfc01ffff] [ 0.541559] pci 0000:00:19.0: reg 14: [mem 0xfc025000-0xfc025fff] [ 0.541573] pci 0000:00:19.0: reg 18: [io 0x1840-0x185f] [ 0.541660] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.541669] pci 0000:00:19.0: PME# disabled [ 0.541769] pci 0000:00:1a.0: reg 20: [io 0x1860-0x187f] [ 0.541908] pci 0000:00:1a.1: reg 20: [io 0x1880-0x189f] [ 0.542045] pci 0000:00:1a.2: reg 20: [io 0x18a0-0x18bf] [ 0.542177] pci 0000:00:1a.7: reg 10: [mem 0xfc226c00-0xfc226fff] [ 0.542284] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.542294] pci 0000:00:1a.7: PME# disabled [ 0.542373] pci 0000:00:1b.0: reg 10: [mem 0xfc020000-0xfc023fff 64bit] [ 0.542468] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.542477] pci 0000:00:1b.0: PME# disabled [ 0.542628] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.542637] pci 0000:00:1c.0: PME# disabled [ 0.542792] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.542802] pci 0000:00:1c.1: PME# disabled [ 0.542958] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.542968] pci 0000:00:1c.3: PME# disabled [ 0.543124] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.543133] pci 0000:00:1c.4: PME# disabled [ 0.543247] pci 0000:00:1d.0: reg 20: [io 0x18c0-0x18df] [ 0.543385] pci 0000:00:1d.1: reg 20: [io 0x18e0-0x18ff] [ 0.543524] pci 0000:00:1d.2: reg 20: [io 0x1c00-0x1c1f] [ 0.543661] pci 0000:00:1d.7: reg 10: [mem 0xfc227000-0xfc2273ff] [ 0.543768] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.543778] pci 0000:00:1d.7: PME# disabled [ 0.544133] pci 0000:00:1f.2: reg 10: [io 0x1c48-0x1c4f] [ 0.544147] pci 0000:00:1f.2: reg 14: [io 0x183c-0x183f] [ 0.544160] pci 0000:00:1f.2: reg 18: [io 0x1c40-0x1c47] [ 0.544174] pci 0000:00:1f.2: reg 1c: [io 0x1838-0x183b] [ 0.544187] pci 0000:00:1f.2: reg 20: [io 0x1c20-0x1c3f] [ 0.544201] pci 0000:00:1f.2: reg 24: [mem 0xfc226000-0xfc2267ff] [ 0.544276] pci 0000:00:1f.2: PME# supported from D3hot [ 0.544285] pci 0000:00:1f.2: PME# disabled [ 0.544352] pci 0000:00:1f.3: reg 10: [mem 0xfc227400-0xfc2274ff 64bit] [ 0.544382] pci 0000:00:1f.3: reg 20: [io 0x1c60-0x1c7f] [ 0.544521] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.544532] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.544543] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 0.544558] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.544732] pci 0000:03:00.0: reg 10: [mem 0xf4300000-0xf4301fff 64bit] [ 0.544885] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.544897] pci 0000:03:00.0: PME# disabled [ 0.544947] pci 0000:00:1c.1: PCI bridge to [bus 03-03] [ 0.544957] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled) [ 0.544967] pci 0000:00:1c.1: bridge window [mem 0xf4300000-0xf43fffff] [ 0.544981] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.545076] pci 0000:00:1c.3: PCI bridge to [bus 05-0c] [ 0.545086] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] [ 0.545096] pci 0000:00:1c.3: bridge window [mem 0xf8000000-0xf9ffffff] [ 0.545110] pci 0000:00:1c.3: bridge window [mem 0xf4000000-0xf40fffff 64bit pref] [ 0.545205] pci 0000:00:1c.4: PCI bridge to [bus 0d-14] [ 0.545214] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff] [ 0.545224] pci 0000:00:1c.4: bridge window [mem 0xfa000000-0xfbffffff] [ 0.545238] pci 0000:00:1c.4: bridge window [mem 0xf4100000-0xf41fffff 64bit pref] [ 0.545347] pci 0000:15:00.0: proprietary Ricoh MMC controller disabled (via cardbus function) [ 0.545353] pci 0000:15:00.0: MMC cards are now supported by standard SDHCI controller [ 0.545375] pci 0000:15:00.0: reg 10: [mem 0xf4800000-0xf4800fff] [ 0.545419] pci 0000:15:00.0: supports D1 D2 [ 0.545424] pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.545434] pci 0000:15:00.0: PME# disabled [ 0.545500] pci 0000:15:00.1: reg 10: [mem 0xf4801000-0xf48017ff] [ 0.545604] pci 0000:15:00.1: supports D1 D2 [ 0.545609] pci 0000:15:00.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.545619] pci 0000:15:00.1: PME# disabled [ 0.545688] pci 0000:15:00.2: reg 10: [mem 0xf4801800-0xf48018ff] [ 0.545792] pci 0000:15:00.2: supports D1 D2 [ 0.545797] pci 0000:15:00.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.545808] pci 0000:15:00.2: PME# disabled [ 0.545879] pci 0000:15:00.4: reg 10: [mem 0xf4802000-0xf48020ff] [ 0.545982] pci 0000:15:00.4: supports D1 D2 [ 0.545987] pci 0000:15:00.4: PME# supported from D0 D1 D2 D3hot D3cold [ 0.545997] pci 0000:15:00.4: PME# disabled [ 0.546062] pci 0000:15:00.5: reg 10: [mem 0xf4802400-0xf48024ff] [ 0.546166] pci 0000:15:00.5: supports D1 D2 [ 0.546171] pci 0000:15:00.5: PME# supported from D0 D1 D2 D3hot D3cold [ 0.546181] pci 0000:15:00.5: PME# disabled [ 0.546294] pci 0000:00:1e.0: PCI bridge to [bus 15-18] (subtractive decode) [ 0.546304] pci 0000:00:1e.0: bridge window [io 0x4000-0x7fff] [ 0.546314] pci 0000:00:1e.0: bridge window [mem 0xf4800000-0xf7ffffff] [ 0.546328] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xf3ffffff 64bit pref] [ 0.546335] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.546341] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.546348] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.546354] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode) [ 0.546361] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode) [ 0.546367] pci 0000:00:1e.0: bridge window [mem 0x7c000000-0xfebfffff] (subtractive decode) [ 0.546504] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.546946] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT] [ 0.547130] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] [ 0.547321] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT] [ 0.547522] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT] [ 0.547722] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [ 0.566880] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) [ 0.567367] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) [ 0.567848] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) [ 0.568327] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) [ 0.568802] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) [ 0.569279] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) [ 0.569754] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11) [ 0.570265] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) [ 0.570469] HEST: Table is not found! [ 0.570636] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.570682] vgaarb: loaded [ 0.571023] SCSI subsystem initialized [ 0.571215] libata version 3.00 loaded. [ 0.571351] usbcore: registered new interface driver usbfs [ 0.571379] usbcore: registered new interface driver hub [ 0.571437] usbcore: registered new device driver usb [ 0.572093] ACPI: WMI: Mapper loaded [ 0.572099] PCI: Using ACPI for IRQ routing [ 0.572105] PCI: pci_cache_line_size set to 64 bytes [ 0.572374] reserve RAM buffer: 000000000009ec00 - 000000000009ffff [ 0.572381] reserve RAM buffer: 00000000796a1000 - 000000007bffffff [ 0.572393] reserve RAM buffer: 00000000797b7000 - 000000007bffffff [ 0.572403] reserve RAM buffer: 00000000798c7000 - 000000007bffffff [ 0.572413] reserve RAM buffer: 0000000079c00000 - 000000007bffffff [ 0.572618] NetLabel: Initializing [ 0.572623] NetLabel: domain hash size = 128 [ 0.572627] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.572658] NetLabel: unlabeled traffic allowed by default [ 0.572730] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.572742] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.572755] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.590071] Switching to clocksource tsc [ 0.613503] AppArmor: AppArmor Filesystem Enabled [ 0.613538] pnp: PnP ACPI init [ 0.613573] ACPI: bus type pnp registered [ 0.685036] pnp: PnP ACPI: found 10 devices [ 0.685043] ACPI: ACPI bus type pnp unregistered [ 0.685071] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.685081] system 00:00: [mem 0x000c0000-0x000c3fff] has been reserved [ 0.685089] system 00:00: [mem 0x000c4000-0x000c7fff] has been reserved [ 0.685098] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved [ 0.685106] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved [ 0.685115] system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved [ 0.685123] system 00:00: [mem 0x000dc000-0x000dffff] could not be reserved [ 0.685132] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved [ 0.685141] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved [ 0.685149] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved [ 0.685158] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved [ 0.685167] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved [ 0.685176] system 00:00: [mem 0x00100000-0x7bffffff] could not be reserved [ 0.685186] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved [ 0.685196] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved [ 0.685214] system 00:02: [io 0x1000-0x107f] has been reserved [ 0.685223] system 00:02: [io 0x1180-0x11ff] has been reserved [ 0.685232] system 00:02: [io 0x0800-0x080f] has been reserved [ 0.685240] system 00:02: [io 0x15e0-0x15ef] has been reserved [ 0.685248] system 00:02: [io 0x1600-0x167f] has been reserved [ 0.685257] system 00:02: [io 0x1680-0x169f] has been reserved [ 0.685266] system 00:02: [mem 0xe0000000-0xefffffff] has been reserved [ 0.685275] system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.685283] system 00:02: [mem 0xfed10000-0xfed13fff] has been reserved [ 0.685299] system 00:02: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.685308] system 00:02: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.685316] system 00:02: [mem 0xfed45000-0xfed4bfff] has been reserved [ 0.693275] pci 0000:00:1c.0: BAR 14: assigned [mem 0x7c000000-0x7c1fffff] [ 0.693286] pci 0000:00:1c.0: BAR 15: assigned [mem 0x7c200000-0x7c3fffff 64bit pref] [ 0.693295] pci 0000:00:1c.1: BAR 15: assigned [mem 0x7c400000-0x7c5fffff 64bit pref] [ 0.693304] pci 0000:00:1c.0: BAR 13: assigned [io 0x8000-0x8fff] [ 0.693311] pci 0000:00:1c.1: BAR 13: assigned [io 0x9000-0x9fff] [ 0.693319] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.693326] pci 0000:00:1c.0: bridge window [io 0x8000-0x8fff] [ 0.693339] pci 0000:00:1c.0: bridge window [mem 0x7c000000-0x7c1fffff] [ 0.693349] pci 0000:00:1c.0: bridge window [mem 0x7c200000-0x7c3fffff 64bit pref] [ 0.693363] pci 0000:00:1c.1: PCI bridge to [bus 03-03] [ 0.693371] pci 0000:00:1c.1: bridge window [io 0x9000-0x9fff] [ 0.693383] pci 0000:00:1c.1: bridge window [mem 0xf4300000-0xf43fffff] [ 0.693393] pci 0000:00:1c.1: bridge window [mem 0x7c400000-0x7c5fffff 64bit pref] [ 0.693407] pci 0000:00:1c.3: PCI bridge to [bus 05-0c] [ 0.693414] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] [ 0.693426] pci 0000:00:1c.3: bridge window [mem 0xf8000000-0xf9ffffff] [ 0.693436] pci 0000:00:1c.3: bridge window [mem 0xf4000000-0xf40fffff 64bit pref] [ 0.693450] pci 0000:00:1c.4: PCI bridge to [bus 0d-14] [ 0.693457] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff] [ 0.693469] pci 0000:00:1c.4: bridge window [mem 0xfa000000-0xfbffffff] [ 0.693479] pci 0000:00:1c.4: bridge window [mem 0xf4100000-0xf41fffff 64bit pref] [ 0.693498] pci 0000:15:00.0: BAR 15: assigned [mem 0xf0000000-0xf3ffffff pref] [ 0.693506] pci 0000:15:00.0: BAR 16: assigned [mem 0x80000000-0x83ffffff] [ 0.693513] pci 0000:15:00.0: BAR 13: assigned [io 0x4000-0x40ff] [ 0.693519] pci 0000:15:00.0: BAR 14: assigned [io 0x4400-0x44ff] [ 0.693525] pci 0000:15:00.0: CardBus bridge to [bus 16-17] [ 0.693530] pci 0000:15:00.0: bridge window [io 0x4000-0x40ff] [ 0.693541] pci 0000:15:00.0: bridge window [io 0x4400-0x44ff] [ 0.693551] pci 0000:15:00.0: bridge window [mem 0xf0000000-0xf3ffffff pref] [ 0.693562] pci 0000:15:00.0: bridge window [mem 0x80000000-0x83ffffff] [ 0.693573] pci 0000:00:1e.0: PCI bridge to [bus 15-18] [ 0.693580] pci 0000:00:1e.0: bridge window [io 0x4000-0x7fff] [ 0.693592] pci 0000:00:1e.0: bridge window [mem 0xf4800000-0xf7ffffff] [ 0.693601] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xf3ffffff 64bit pref] [ 0.693635] alloc irq_desc for 20 on node -1 [ 0.693640] alloc kstat_irqs on node -1 [ 0.693654] pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.693665] pci 0000:00:1c.0: setting latency timer to 64 [ 0.693683] alloc irq_desc for 21 on node -1 [ 0.693687] alloc kstat_irqs on node -1 [ 0.693696] pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.693706] pci 0000:00:1c.1: setting latency timer to 64 [ 0.693723] alloc irq_desc for 23 on node -1 [ 0.693727] alloc kstat_irqs on node -1 [ 0.693735] pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 0.693745] pci 0000:00:1c.3: setting latency timer to 64 [ 0.693764] pci 0000:00:1c.4: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.693774] pci 0000:00:1c.4: setting latency timer to 64 [ 0.693789] pci 0000:00:1e.0: setting latency timer to 64 [ 0.693811] alloc irq_desc for 16 on node -1 [ 0.693815] alloc kstat_irqs on node -1 [ 0.693823] pci 0000:15:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.693837] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.693843] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.693848] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.693854] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff] [ 0.693860] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff] [ 0.693865] pci_bus 0000:00: resource 9 [mem 0x7c000000-0xfebfffff] [ 0.693871] pci_bus 0000:02: resource 0 [io 0x8000-0x8fff] [ 0.693877] pci_bus 0000:02: resource 1 [mem 0x7c000000-0x7c1fffff] [ 0.693883] pci_bus 0000:02: resource 2 [mem 0x7c200000-0x7c3fffff 64bit pref] [ 0.693889] pci_bus 0000:03: resource 0 [io 0x9000-0x9fff] [ 0.693895] pci_bus 0000:03: resource 1 [mem 0xf4300000-0xf43fffff] [ 0.693901] pci_bus 0000:03: resource 2 [mem 0x7c400000-0x7c5fffff 64bit pref] [ 0.693907] pci_bus 0000:05: resource 0 [io 0x2000-0x2fff] [ 0.693913] pci_bus 0000:05: resource 1 [mem 0xf8000000-0xf9ffffff] [ 0.693919] pci_bus 0000:05: resource 2 [mem 0xf4000000-0xf40fffff 64bit pref] [ 0.693925] pci_bus 0000:0d: resource 0 [io 0x3000-0x3fff] [ 0.693930] pci_bus 0000:0d: resource 1 [mem 0xfa000000-0xfbffffff] [ 0.693937] pci_bus 0000:0d: resource 2 [mem 0xf4100000-0xf41fffff 64bit pref] [ 0.693943] pci_bus 0000:15: resource 0 [io 0x4000-0x7fff] [ 0.693948] pci_bus 0000:15: resource 1 [mem 0xf4800000-0xf7ffffff] [ 0.693954] pci_bus 0000:15: resource 2 [mem 0xf0000000-0xf3ffffff 64bit pref] [ 0.693960] pci_bus 0000:15: resource 4 [io 0x0000-0x0cf7] [ 0.693966] pci_bus 0000:15: resource 5 [io 0x0d00-0xffff] [ 0.693971] pci_bus 0000:15: resource 6 [mem 0x000a0000-0x000bffff] [ 0.693977] pci_bus 0000:15: resource 7 [mem 0x000d4000-0x000d7fff] [ 0.693982] pci_bus 0000:15: resource 8 [mem 0x000d8000-0x000dbfff] [ 0.693988] pci_bus 0000:15: resource 9 [mem 0x7c000000-0xfebfffff] [ 0.693994] pci_bus 0000:16: resource 0 [io 0x4000-0x40ff] [ 0.693999] pci_bus 0000:16: resource 1 [io 0x4400-0x44ff] [ 0.694005] pci_bus 0000:16: resource 2 [mem 0xf0000000-0xf3ffffff pref] [ 0.694010] pci_bus 0000:16: resource 3 [mem 0x80000000-0x83ffffff] [ 0.694090] NET: Registered protocol family 2 [ 0.694354] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.696465] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.699847] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.700754] TCP: Hash tables configured (established 262144 bind 65536) [ 0.700760] TCP reno registered [ 0.700778] UDP hash table entries: 1024 (order: 3, 32768 bytes) [ 0.700825] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [ 0.701060] NET: Registered protocol family 1 [ 0.701104] pci 0000:00:02.0: Boot video device [ 0.701453] PCI: CLS 64 bytes, default 64 [ 0.701538] Simple Boot Flag at 0x35 set to 0x1 [ 0.701957] Scanning for low memory corruption every 60 seconds [ 0.702307] audit: initializing netlink socket (disabled) [ 0.702330] type=2000 audit(1284393293.690:1): initialized [ 0.739948] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.743582] VFS: Disk quotas dquot_6.5.2 [ 0.743717] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.745095] fuse init (API version 7.14) [ 0.745302] msgmni has been set to 3783 [ 0.747002] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.747010] io scheduler noop registered [ 0.747014] io scheduler deadline registered [ 0.747109] io scheduler cfq registered (default) [ 0.747391] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.747469] alloc irq_desc for 40 on node -1 [ 0.747474] alloc kstat_irqs on node -1 [ 0.747496] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X [ 0.747679] pcieport 0000:00:1c.1: setting latency timer to 64 [ 0.747749] alloc irq_desc for 41 on node -1 [ 0.747753] alloc kstat_irqs on node -1 [ 0.747770] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X [ 0.747938] pcieport 0000:00:1c.3: setting latency timer to 64 [ 0.748008] alloc irq_desc for 42 on node -1 [ 0.748013] alloc kstat_irqs on node -1 [ 0.748029] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X [ 0.748205] pcieport 0000:00:1c.4: setting latency timer to 64 [ 0.748274] alloc irq_desc for 43 on node -1 [ 0.748279] alloc kstat_irqs on node -1 [ 0.748295] pcieport 0000:00:1c.4: irq 43 for MSI/MSI-X [ 0.748511] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.749605] pciehp 0000:00:1c.0:pcie04: HPC vendor_id 8086 device_id 2940 ss_vid 17aa ss_did 20f3 [ 0.749716] pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded [ 0.749754] pciehp 0000:00:1c.1:pcie04: HPC vendor_id 8086 device_id 2942 ss_vid 17aa ss_did 20f3 [ 0.749819] pciehp 0000:00:1c.1:pcie04: service driver pciehp loaded [ 0.749854] pciehp 0000:00:1c.3:pcie04: HPC vendor_id 8086 device_id 2946 ss_vid 17aa ss_did 20f3 [ 0.749920] pciehp 0000:00:1c.3:pcie04: service driver pciehp loaded [ 0.749956] pciehp 0000:00:1c.4:pcie04: HPC vendor_id 8086 device_id 2948 ss_vid 17aa ss_did 20f3 [ 0.750020] pciehp 0000:00:1c.4:pcie04: service driver pciehp loaded [ 0.750039] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.751029] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90004980000, using 960k, total 960k [ 0.751036] vesafb: mode is 800x600x16, linelength=1600, pages=0 [ 0.751041] vesafb: scrolling: redraw [ 0.751048] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 [ 0.771343] Console: switching to colour frame buffer device 100x37 [ 0.791362] fb0: VESA VGA frame buffer device [ 0.791416] intel_idle: MWAIT substates: 0x3122220 [ 0.791421] intel_idle: does not run on family 6 model 23 [ 0.791909] ACPI: AC Adapter [AC] (off-line) [ 0.792122] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 0.792412] ACPI: Lid Switch [LID] [ 0.792512] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 0.792526] ACPI: Sleep Button [SLPB] [ 0.792662] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.792672] ACPI: Power Button [PWRF] [ 0.793408] ACPI: acpi_idle registered with cpuidle [ 0.810024] Monitor-Mwait will be used to enter C-1 state [ 0.810091] Monitor-Mwait will be used to enter C-2 state [ 0.819864] Monitor-Mwait will be used to enter C-3 state [ 0.819892] Marking TSC unstable due to TSC halts in idle [ 0.822795] Switching to clocksource hpet [ 0.903947] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.903970] ACPI: Thermal Zone [THM0] (66 C) [ 0.907329] thermal LNXTHERM:02: registered as thermal_zone1 [ 0.907350] ACPI: Thermal Zone [THM1] (64 C) [ 0.907608] ERST: Table is not found! [ 0.907972] Linux agpgart interface v0.103 [ 0.908041] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.908748] alloc irq_desc for 17 on node -1 [ 0.908754] alloc kstat_irqs on node -1 [ 0.908770] serial 0000:00:03.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.908903] 0000:00:03.3: ttyS0 at I/O 0x1830 (irq = 17) is a 16550A [ 0.911494] brd: module loaded [ 0.912983] loop: module loaded [ 0.914203] Fixed MDIO Bus: probed [ 0.914287] PPP generic driver version 2.4.2 [ 0.914364] tun: Universal TUN/TAP device driver, 1.6 [ 0.914369] tun: (C) 1999-2004 Max Krasnyansky [ 0.914530] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.930085] ACPI: Battery Slot [BAT0] (battery present) [ 0.930337] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [ 0.930627] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [ 0.930644] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 0.930683] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 0.930691] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 0.930775] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.930832] ehci_hcd 0000:00:1a.7: debug port 1 [ 0.934728] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported [ 0.934766] ehci_hcd 0000:00:1a.7: irq 23, io mem 0xfc226c00 [ 0.960029] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.960320] hub 1-0:1.0: USB hub found [ 0.960332] hub 1-0:1.0: 6 ports detected [ 0.960817] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [ 0.961098] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [ 0.961116] alloc irq_desc for 19 on node -1 [ 0.961121] alloc kstat_irqs on node -1 [ 0.961137] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.961174] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.961182] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.961292] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.961346] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.965246] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 0.965283] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfc227000 [ 0.990030] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.990311] hub 2-0:1.0: USB hub found [ 0.990322] hub 2-0:1.0: 6 ports detected [ 0.990508] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.990547] uhci_hcd: USB Universal Host Controller Interface driver [ 0.991009] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 0.991282] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 0.991298] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.991313] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 0.991321] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.991404] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.991470] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860 [ 0.991734] hub 3-0:1.0: USB hub found [ 0.991745] hub 3-0:1.0: 2 ports detected [ 0.991887] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.991901] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 0.991908] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.992000] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 0.992067] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880 [ 0.992329] hub 4-0:1.0: USB hub found [ 0.992339] hub 4-0:1.0: 2 ports detected [ 0.992767] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [ 0.993052] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [ 0.993063] alloc irq_desc for 22 on node -1 [ 0.993069] alloc kstat_irqs on node -1 [ 0.993083] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 0.993095] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 0.993103] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 0.993188] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 0.993245] uhci_hcd 0000:00:1a.2: irq 22, io base 0x000018a0 [ 0.993502] hub 5-0:1.0: USB hub found [ 0.993512] hub 5-0:1.0: 2 ports detected [ 0.993934] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 0.994254] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 0.994266] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.994279] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.994287] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.994373] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 0.994432] uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018c0 [ 0.994689] hub 6-0:1.0: USB hub found [ 0.994700] hub 6-0:1.0: 2 ports detected [ 0.994839] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.994852] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.994860] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.994938] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 0.994996] uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018e0 [ 0.995268] hub 7-0:1.0: USB hub found [ 0.995278] hub 7-0:1.0: 2 ports detected [ 0.995419] alloc irq_desc for 18 on node -1 [ 0.995425] alloc kstat_irqs on node -1 [ 0.995437] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.995450] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.995457] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.995531] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 0.995588] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001c00 [ 0.995849] hub 8-0:1.0: USB hub found [ 0.995859] hub 8-0:1.0: 2 ports detected [ 0.996121] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 1.003929] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.003948] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.004096] mice: PS/2 mouse device common for all mice [ 1.004358] rtc_cmos 00:07: RTC can wake from S4 [ 1.004459] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 1.004509] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.004757] device-mapper: uevent: version 1.0.3 [ 1.009207] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 1.011670] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com [ 1.011830] device-mapper: multipath: version 1.1.1 loaded [ 1.011836] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1.012325] cpuidle: using governor ladder [ 1.012563] cpuidle: using governor menu [ 1.013236] TCP cubic registered [ 1.013550] NET: Registered protocol family 10 [ 1.014380] lo: Disabled Privacy Extensions [ 1.014855] NET: Registered protocol family 17 [ 1.018528] PM: Resume from disk failed. [ 1.018540] registered taskstats version 1 [ 1.018916] Magic number: 10:476:942 [ 1.019030] rtc_cmos 00:07: setting system clock to 2010-09-13 15:54:54 UTC (1284393294) [ 1.019032] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.019034] EDD information not available. [ 1.066886] Freeing initrd memory: 10744k freed [ 1.072192] Freeing unused kernel memory: 908k freed [ 1.072673] Write protecting the kernel read-only data: 10240k [ 1.072901] Freeing unused kernel memory: 416k freed [ 1.073240] Freeing unused kernel memory: 1644k freed [ 1.086853] udev[82]: starting version 162 [ 1.170774] firewire_ohci 0000:15:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.187525] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k4 [ 1.187529] e1000e: Copyright (c) 1999 - 2009 Intel Corporation. [ 1.187576] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.187589] e1000e 0000:00:19.0: setting latency timer to 64 [ 1.187715] alloc irq_desc for 44 on node -1 [ 1.187717] alloc kstat_irqs on node -1 [ 1.187730] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X [ 1.191597] sdhci: Secure Digital Host Controller Interface driver [ 1.191599] sdhci: Copyright(c) Pierre Ossman [ 1.340200] firewire_ohci: Added fw-ohci device 0000:15:00.1, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x0 [ 1.340339] sdhci-pci 0000:15:00.2: SDHCI controller found [1180:0822] (rev 21) [ 1.340359] sdhci-pci 0000:15:00.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.341388] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. [ 1.342435] Registered led device: mmc0:: [ 1.343469] mmc0: SDHCI controller on PCI [0000:15:00.2] using DMA [ 1.712527] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:24:7e:e0:4a:d9 [ 1.712530] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection [ 1.712555] e1000e 0000:00:19.0: eth0: MAC: 7, PHY: 8, PBA No: 1008ff-0ff [ 1.712592] ahci 0000:00:1f.2: version 3.0 [ 1.712606] ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 1.712643] alloc irq_desc for 45 on node -1 [ 1.712645] alloc kstat_irqs on node -1 [ 1.712656] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X [ 1.712695] ahci: SSS flag set, parallel bus scan disabled [ 1.712723] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode [ 1.712726] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc sxs [ 1.712731] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.712907] scsi0 : ahci [ 1.713002] scsi1 : ahci [ 1.713051] scsi2 : ahci [ 1.713095] scsi3 : ahci [ 1.713750] ata1: SATA max UDMA/133 abar m2048@0xfc226000 port 0xfc226100 irq 45 [ 1.713754] ata2: SATA max UDMA/133 abar m2048@0xfc226000 port 0xfc226180 irq 45 [ 1.713756] ata3: DUMMY [ 1.713757] ata4: DUMMY [ 1.830119] firewire_core: created device fw0: GUID 00061b032a4a7bce, S400 [ 2.060113] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.061133] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 2.061138] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 2.061234] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded [ 2.061240] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 2.117683] ata1.00: ATA-8: WDC WD1600BEVS-08VAT2, 14.01A14, max UDMA/133 [ 2.117687] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.119346] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 2.119351] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 2.119516] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded [ 2.119521] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 2.120963] ata1.00: configured for UDMA/133 [ 2.143685] ata1.00: configured for UDMA/133 [ 2.143687] ata1: EH complete [ 2.143848] scsi 0:0:0:0: Direct-Access ATA WDC WD1600BEVS-0 14.0 PQ: 0 ANSI: 5 [ 2.143948] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.144037] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 2.144081] sd 0:0:0:0: [sda] Write Protect is off [ 2.144084] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.144103] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.144232] sda: sda1 sda2 sda3 < sda5 > sda4 [ 2.174051] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.490160] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.493203] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded [ 2.494146] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded [ 2.496299] ata2.00: ATAPI: MATSHITADVD-RAM UJ862A, SB15, max UDMA/33 [ 2.500436] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded [ 2.501344] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded [ 2.503386] ata2.00: configured for UDMA/33 [ 2.524570] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ862A SB15 PQ: 0 ANSI: 5 [ 2.531055] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.531059] Uniform CD-ROM driver Revision: 3.20 [ 2.531157] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.531209] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 2.887449] EXT4-fs (sda4): INFO: recovery required on readonly filesystem [ 2.887453] EXT4-fs (sda4): write access will be enabled during recovery [ 6.281075] EXT4-fs (sda4): orphan cleanup on readonly fs [ 6.281083] EXT4-fs (sda4): ext4_orphan_cleanup: deleting unreferenced inode 5767588 [ 6.300810] EXT4-fs (sda4): ext4_orphan_cleanup: deleting unreferenced inode 400836 [ 6.300883] EXT4-fs (sda4): ext4_orphan_cleanup: deleting unreferenced inode 5767717 [ 6.382129] EXT4-fs (sda4): ext4_orphan_cleanup: deleting unreferenced inode 4983701 [ 6.382210] EXT4-fs (sda4): ext4_orphan_cleanup: deleting unreferenced inode 4983661 [ 6.382230] EXT4-fs (sda4): 5 orphan inodes deleted [ 6.382234] EXT4-fs (sda4): recovery complete [ 6.856723] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null) [ 20.114786] udev[415]: starting version 162 [ 20.220930] Adding 1999868k swap on /dev/sda5. Priority:-1 extents:1 across:1999868k [ 20.224018] agpgart-intel 0000:00:00.0: Intel GM45 Chipset [ 20.225516] agpgart-intel 0000:00:00.0: detected 32764K stolen memory [ 20.307600] Non-volatile memory driver v1.3 [ 20.370654] yenta_cardbus 0000:15:00.0: CardBus bridge found [17aa:20c6] [ 20.380588] lp: driver loaded but no devices found [ 20.422094] cfg80211: Calling CRDA to update world regulatory domain [ 20.463406] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 20.473315] type=1400 audit(1284407713.942:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=724 comm="apparmor_parser" [ 20.473924] type=1400 audit(1284407713.942:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=724 comm="apparmor_parser" [ 20.474248] type=1400 audit(1284407713.942:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=724 comm="apparmor_parser" [ 20.499179] cfg80211: World regulatory domain updated: [ 20.499182] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 20.499185] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 20.499187] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 20.499189] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 20.499192] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 20.499194] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 20.502094] yenta_cardbus 0000:15:00.0: ISA IRQ mask 0x0cb8, PCI irq 16 [ 20.502099] yenta_cardbus 0000:15:00.0: Socket status: 30000006 [ 20.502107] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [io 0x4000-0x7fff] [ 20.502109] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xf4800000-0xf7ffffff] [ 20.502112] pcmcia_socket pcmcia_socket0: cs: memory probe 0xf4800000-0xf7ffffff: excluding 0xf4800000-0xf4b7ffff [ 20.502126] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xf0000000-0xf3ffffff 64bit pref] [ 20.502128] pcmcia_socket pcmcia_socket0: cs: memory probe 0xf0000000-0xf3ffffff: excluding 0xf0000000-0xf3ffffff [ 20.515086] r852 0000:15:00.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 20.523817] r852: driver loaded succesfully [ 20.541519] EXT4-fs (sda4): re-mounted. Opts: errors=remount-ro [ 20.568201] [drm] Initialized drm 1.1.0 20060810 [ 20.587954] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree: [ 20.587958] iwlagn: Copyright(c) 2003-2010 Intel Corporation [ 20.588043] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 20.588052] iwlagn 0000:03:00.0: setting latency timer to 64 [ 20.588090] iwlagn 0000:03:00.0: Detected Intel(R) WiFi Link 5100 AGN, REV=0x54 [ 20.595594] thinkpad_acpi: ThinkPad ACPI Extras v0.24 [ 20.595597] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 20.595599] thinkpad_acpi: ThinkPad BIOS 7UET86WW (3.16 ), EC 7VHT16WW-1.06 [ 20.595601] thinkpad_acpi: Lenovo ThinkPad T400, model 7417CTO [ 20.600837] thinkpad_acpi: detected a 16-level brightness capable ThinkPad [ 20.602423] thinkpad_acpi: radio switch found; radios are enabled [ 20.602546] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver [ 20.602549] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... [ 20.606390] Registered led device: tpacpi::thinklight [ 20.606795] Registered led device: tpacpi::power [ 20.607185] Registered led device: tpacpi::standby [ 20.607584] Registered led device: tpacpi::thinkvantage [ 20.607772] i915 0000:00:02.0: power state changed by ACPI to D0 [ 20.607810] i915 0000:00:02.0: power state changed by ACPI to D0 [ 20.607817] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 20.607820] i915 0000:00:02.0: setting latency timer to 64 [ 20.613333] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one. [ 20.613415] thinkpad_acpi: Console audio control enabled, mode: monitor (read only) [ 20.616536] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input4 [ 20.637785] iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels [ 20.637867] alloc irq_desc for 46 on node -1 [ 20.637869] alloc kstat_irqs on node -1 [ 20.637910] iwlagn 0000:03:00.0: irq 46 for MSI/MSI-X [ 20.671984] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xd3fff 0xdc000-0xfffff [ 20.705183] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean. [ 20.705235] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff [ 20.707444] alloc irq_desc for 47 on node -1 [ 20.707447] alloc kstat_irqs on node -1 [ 20.707456] i915 0000:00:02.0: irq 47 for MSI/MSI-X [ 20.707470] [drm] set up 31M of stolen space [ 20.721440] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X [ 20.738104] iwlagn 0000:03:00.0: loaded firmware version 8.24.2.12 [ 20.790072] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X [ 20.790383] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 20.790879] phy0: Selected rate control algorithm 'iwl-agn-rs' [ 20.898285] type=1400 audit(1284407714.362:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=975 comm="apparmor_parser" [ 20.898957] type=1400 audit(1284407714.362:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=975 comm="apparmor_parser" [ 20.899282] type=1400 audit(1284407714.362:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=975 comm="apparmor_parser" [ 20.903643] type=1400 audit(1284407714.372:8): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=977 comm="apparmor_parser" [ 20.908715] type=1400 audit(1284407714.372:9): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=974 comm="apparmor_parser" [ 20.915453] type=1400 audit(1284407714.382:10): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=977 comm="apparmor_parser" [ 20.924923] type=1400 audit(1284407714.392:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=977 comm="apparmor_parser" [ 21.046187] IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 21.061982] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input5 [ 21.081310] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 21.473834] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 21.851284] Skipping EDID probe due to cached edid [ 21.869167] vboxdrv: Trying to deactivate the NMI watchdog permanently... [ 21.869169] vboxdrv: Successfully done. [ 21.869171] vboxdrv: Found 2 processor cores. [ 21.869552] VBoxDrv: dbg - g_abExecMemory=ffffffffa0449d60 [ 21.869571] vboxdrv: fAsync=0 offMin=0x1b0 offMax=0x278d [ 21.870062] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 21.870065] vboxdrv: Successfully loaded version 3.2.8_OSE (interface 0x00140001). [ 22.151678] checking generic (d0000000 f0000) vs hw (d0000000 10000000) [ 22.151681] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver [ 22.151724] Console: switching to colour dummy device 80x25 [ 22.151937] Console: switching to colour frame buffer device 180x56 [ 22.151942] fb0: inteldrmfb frame buffer device [ 22.151943] drm: registered panic notifier [ 22.151946] Slow work thread pool: Starting up [ 22.153468] Slow work thread pool: Ready [ 22.156689] acpi device:01: registered as cooling_device2 [ 22.157504] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6 [ 22.157613] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 22.157869] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 22.157911] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 22.157964] alloc irq_desc for 48 on node -1 [ 22.157966] alloc kstat_irqs on node -1 [ 22.157979] HDA Intel 0000:00:1b.0: irq 48 for MSI/MSI-X [ 22.158015] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 22.196125] ppdev: user-space parallel port driver [ 22.272174] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 22.272551] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 22.272630] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 22.272706] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 22.394864] Skipping EDID probe due to cached edid [ 22.629426] ata1.00: configured for UDMA/133 [ 22.629430] ata1: EH complete [ 22.629537] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 23.011340] Skipping EDID probe due to cached edid [ 25.480073] Skipping EDID probe due to cached edid [ 26.104307] Skipping EDID probe due to cached edid [ 26.740057] Skipping EDID probe due to cached edid [ 27.360053] Skipping EDID probe due to cached edid [ 27.584410] EXT4-fs (sda4): re-mounted. Opts: errors=remount-ro,commit=600 [ 28.842085] ata1: hard resetting link [ 29.190785] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 29.191824] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 29.191829] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 29.191898] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded [ 29.191903] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 29.236461] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 29.236465] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 29.236559] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded [ 29.236562] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 29.237870] ata1.00: configured for UDMA/133 [ 29.240599] ata1.00: configured for UDMA/133 [ 29.240603] ata1: EH complete [ 29.263170] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 29.441415] Skipping EDID probe due to cached edid [ 31.159571] EXT4-fs (sda4): re-mounted. Opts: errors=remount-ro,commit=600 [ 46.760121] Skipping EDID probe due to cached edid [ 47.430111] Skipping EDID probe due to cached edid [ 48.100108] Skipping EDID probe due to cached edid [ 48.870127] Skipping EDID probe due to cached edid [ 49.961336] Skipping EDID probe due to cached edid [ 55.520062] Skipping EDID probe due to cached edid [ 302.094018] ata1: hard resetting link [ 302.441541] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 302.443925] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 302.443939] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 302.444120] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded [ 302.444131] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 302.456362] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 302.456375] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 302.456483] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded [ 302.456494] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 302.457825] ata1.00: configured for UDMA/133 [ 302.461399] ata1.00: configured for UDMA/133 [ 302.461408] ata1: EH complete [ 302.669839] EXT4-fs (sda4): re-mounted. Opts: errors=remount-ro,commit=0 [ 303.963478] PM: Syncing filesystems ... done. [ 303.965708] PM: Preparing system for mem sleep [ 304.290330] Freezing user space processes ... (elapsed 0.02 seconds) done. [ 304.311376] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [ 304.330627] PM: Entering mem sleep [ 304.330714] Suspending console(s) (use no_console_suspend to debug) [ 304.331419] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 304.331629] sd 0:0:0:0: [sda] Stopping disk [ 304.348023] ehci_hcd 0000:00:1d.7: PCI INT D disabled [ 304.348036] uhci_hcd 0000:00:1d.2: PCI INT C disabled [ 304.348046] uhci_hcd 0000:00:1d.1: PCI INT B disabled [ 304.348057] uhci_hcd 0000:00:1d.0: PCI INT A disabled [ 304.348065] pciehp 0000:00:1c.4:pcie04: pciehp_suspend ENTRY [ 304.348072] pciehp 0000:00:1c.3:pcie04: pciehp_suspend ENTRY [ 304.348094] pciehp 0000:00:1c.0:pcie04: pciehp_suspend ENTRY [ 304.348133] ehci_hcd 0000:00:1a.7: PCI INT D disabled [ 304.348144] uhci_hcd 0000:00:1a.2: PCI INT C disabled [ 304.348155] uhci_hcd 0000:00:1a.1: PCI INT B disabled [ 304.348165] uhci_hcd 0000:00:1a.0: PCI INT A disabled [ 304.348212] ACPI handle has no context! [ 304.348516] ACPI handle has no context! [ 304.348523] sdhci-pci 0000:15:00.2: PCI INT C disabled [ 304.348530] ACPI handle has no context! [ 304.360065] ACPI handle has no context! [ 304.360087] i915 0000:00:02.0: power state changed by ACPI to D3 [ 304.360111] pciehp 0000:00:1c.1:pcie04: pciehp_suspend ENTRY [ 304.422335] e1000e 0000:00:19.0: PCI INT A disabled [ 304.422342] e1000e 0000:00:19.0: PME# enabled [ 304.422348] e1000e 0000:00:19.0: wake-up capability enabled by ACPI [ 304.450547] HDA Intel 0000:00:1b.0: PCI INT B disabled [ 304.470014] PM: suspend of drv:HDA Intel dev:0000:00:1b.0 complete after 121.906 msecs [ 304.632731] PM: suspend of drv:sd dev:0:0:0:0 complete after 301.314 msecs [ 304.632741] PM: suspend of drv:scsi dev:target0:0:0 complete after 301.273 msecs [ 304.632749] PM: suspend of drv:scsi dev:host0 complete after 301.247 msecs [ 304.690016] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 342.037 msecs [ 304.690026] PM: suspend of drv: dev:pci0000:00 complete after 341.547 msecs [ 304.690034] PM: suspend of devices complete after 358.986 msecs [ 304.690036] PM: suspend devices took 0.360 seconds [ 304.780048] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3 [ 304.840056] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D3 [ 304.920058] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D3 [ 304.980056] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D3 [ 305.040061] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D3 [ 305.040197] PM: late suspend of devices complete after 350.158 msecs [ 305.140051] ACPI: Preparing to enter system sleep state S3 [ 305.441330] PM: Saving platform NVS memory [ 305.453826] Disabling non-boot CPUs ... [ 305.620027] CPU 1 is now offline [ 305.620031] SMP alternatives: switching to UP code [ 305.626539] Extended CMOS year: 2000 [ 305.626539] Back to C! [ 305.626539] PM: Restoring platform NVS memory [ 305.626539] Extended CMOS year: 2000 [ 305.626539] Enabling non-boot CPUs ... [ 305.626539] SMP alternatives: switching to SMP code [ 305.632803] Booting Node 0 Processor 1 APIC 0x1 [ 305.910136] CPU1 is up [ 305.911071] ACPI: Waking up from system sleep state S3 [ 306.741454] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407) [ 306.741478] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007) [ 306.741490] pci 0000:00:03.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 306.741500] pci 0000:00:03.0: restoring config space at offset 0x1 (was 0x100006, writing 0x180006) [ 306.741513] serial 0000:00:03.3: restoring config space at offset 0xf (was 0x200, writing 0x20b) [ 306.851299] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 306.871306] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 306.871334] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 306.891306] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 306.911306] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 306.911310] PM: early resume of drv:uhci_hcd dev:0000:00:1a.0 complete after 169.733 msecs [ 306.911340] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 306.931306] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [ 306.951306] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [ 306.951334] uhci_hcd 0000:00:1a.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 306.971306] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [ 306.991305] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [ 306.991343] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) [ 307.011310] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [ 307.031306] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [ 307.031346] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102) [ 307.031386] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x1fff1, writing 0x7c317c21) [ 307.031390] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0xfff0, writing 0x7c107c00) [ 307.031395] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0xf0, writing 0x8080) [ 307.031406] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [ 307.031461] pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x1fff1, writing 0x7c517c41) [ 307.031467] pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0xf0, writing 0x9090) [ 307.031478] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [ 307.031542] pcieport 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [ 307.031607] pcieport 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [ 307.051306] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 307.071306] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 307.071334] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 307.091306] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 307.111306] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 307.111336] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 307.111375] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 307.111420] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) [ 307.131306] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [ 307.151306] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [ 307.151428] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407) [ 307.170021] firewire_ohci 0000:15:00.1: BAR 0: set to [mem 0xf4801000-0xf48017ff] (PCI address [0xf4801000-0xf48017ff] [ 307.170054] firewire_ohci 0000:15:00.1: restoring config space at offset 0x3 (was 0x800000, writing 0x802010) [ 307.170062] firewire_ohci 0000:15:00.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106) [ 307.190019] sdhci-pci 0000:15:00.2: BAR 0: set to [mem 0xf4801800-0xf48018ff] (PCI address [0xf4801800-0xf48018ff] [ 307.190052] sdhci-pci 0000:15:00.2: restoring config space at offset 0x3 (was 0x800000, writing 0x802010) [ 307.190059] sdhci-pci 0000:15:00.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106) [ 307.210019] r852 0000:15:00.5: BAR 0: set to [mem 0xf4802400-0xf48024ff] (PCI address [0xf4802400-0xf48024ff] [ 307.210052] r852 0000:15:00.5: restoring config space at offset 0x3 (was 0x800000, writing 0x802010) [ 307.210059] r852 0000:15:00.5: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106) [ 307.210487] PM: early resume of devices complete after 469.150 msecs [ 307.221315] i915 0000:00:02.0: power state changed by ACPI to D0 [ 307.221353] i915 0000:00:02.0: power state changed by ACPI to D0 [ 307.221358] i915 0000:00:02.0: setting latency timer to 64 [ 307.221400] e1000e 0000:00:19.0: wake-up capability disabled by ACPI [ 307.221405] e1000e 0000:00:19.0: PME# disabled [ 307.221478] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X [ 307.223613] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 307.223619] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 307.223643] usb usb4: root hub lost power or was reset [ 307.223728] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 307.223734] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 307.223771] HDA Intel 0000:00:1b.0: irq 48 for MSI/MSI-X [ 307.223802] pciehp 0000:00:1c.0:pcie04: pciehp_resume ENTRY [ 307.223807] pciehp 0000:00:1c.1:pcie04: pciehp_resume ENTRY [ 307.223812] pciehp 0000:00:1c.3:pcie04: pciehp_resume ENTRY [ 307.223817] pciehp 0000:00:1c.4:pcie04: pciehp_resume ENTRY [ 307.223857] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 307.223863] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 307.223887] usb usb7: root hub lost power or was reset [ 307.223908] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 307.223913] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 307.223937] usb usb8: root hub lost power or was reset [ 307.223991] pci 0000:00:1e.0: setting latency timer to 64 [ 307.224006] ahci 0000:00:1f.2: setting latency timer to 64 [ 307.224118] sdhci-pci 0000:15:00.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 307.224120] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. [ 307.225396] sd 0:0:0:0: [sda] Starting disk [ 307.232729] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 307.232829] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [ 307.232979] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [ 307.233230] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 307.233249] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [ 307.233554] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 307.233562] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 307.233574] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 307.233612] usb usb6: root hub lost power or was reset [ 307.233801] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 307.233806] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 307.233811] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [ 307.233813] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 307.233816] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 307.233824] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 307.233840] usb usb3: root hub lost power or was reset [ 307.233853] usb usb5: root hub lost power or was reset [ 307.234153] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [ 307.234157] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [ 307.234160] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 307.234164] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 307.234167] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 307.234173] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 307.361351] PM: resume of drv:firewire_ohci dev:0000:15:00.1 complete after 137.247 msecs [ 307.361385] firewire_core: skipped bus generations, destroying all nodes [ 307.381362] PM: resume of drv:usb dev:usb8 complete after 156.009 msecs [ 307.381385] PM: resume of drv:usb dev:usb7 complete after 156.063 msecs [ 307.381390] PM: resume of drv:hub dev:8-0:1.0 complete after 156.021 msecs [ 307.381401] PM: resume of drv:hub dev:7-0:1.0 complete after 156.062 msecs [ 307.381407] PM: resume of drv:usb dev:usb4 complete after 156.167 msecs [ 307.381421] PM: resume of drv:hub dev:4-0:1.0 complete after 156.165 msecs [ 307.391375] PM: resume of drv:usb dev:usb5 complete after 166.105 msecs [ 307.391379] PM: resume of drv:usb dev:usb6 complete after 166.078 msecs [ 307.391389] PM: resume of drv:hub dev:5-0:1.0 complete after 166.106 msecs [ 307.391395] PM: resume of drv:hub dev:6-0:1.0 complete after 166.086 msecs [ 307.391399] PM: resume of drv:usb dev:usb3 complete after 166.184 msecs [ 307.391417] PM: resume of drv:hub dev:3-0:1.0 complete after 166.190 msecs [ 307.391448] PM: resume of drv: dev:ep_81 complete after 110.081 msecs [ 307.401498] PM: resume of drv:i915 dev:0000:00:02.0 complete after 180.222 msecs [ 307.571359] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 307.574656] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded [ 307.575590] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded [ 307.581610] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded [ 307.582387] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded [ 307.584467] ata2.00: configured for UDMA/33 [ 307.861371] firewire_core: rediscovered device fw0 [ 307.871355] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 307.873084] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 307.873088] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 307.873187] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded [ 307.873191] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 307.887304] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 307.887309] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 307.887429] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded [ 307.887433] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 307.888792] ata1.00: configured for UDMA/133 [ 307.904107] ata1.00: configured for UDMA/133 [ 307.904111] ata1: EH complete [ 307.910789] PM: resume of drv:sd dev:0:0:0:0 complete after 685.386 msecs [ 307.910803] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 516.881 msecs [ 307.910820] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 685.383 msecs [ 308.060107] PM: resume of drv:pcmcia_socket dev:pcmcia_socket0 complete after 149.205 msecs [ 308.062565] PM: resume of devices complete after 852.026 msecs [ 308.062749] PM: resume devices took 0.850 seconds [ 308.062776] PM: Finishing wakeup. [ 308.062778] Restarting tasks ... done. [ 308.081039] video LNXVIDEO:00: Restoring backlight state [ 308.171353] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 308.200142] Skipping EDID probe due to cached edid [ 308.886000] ata1.00: configured for UDMA/133 [ 308.886006] ata1: EH complete [ 308.893684] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 309.609313] EXT4-fs (sda4): re-mounted. Opts: errors=remount-ro,commit=600 [ 314.532096] wlan0: authenticate with 00:13:10:fe:90:76 (try 1) [ 314.534879] wlan0: authenticated [ 314.534950] wlan0: associate with 00:13:10:fe:90:76 (try 1) [ 314.537064] wlan0: RX AssocResp from 00:13:10:fe:90:76 (capab=0x401 status=0 aid=2) [ 314.537071] wlan0: associated [ 314.540479] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 325.210247] wlan0: no IPv6 routers present [ 357.673157] warning: `VirtualBox' uses 32-bit capabilities (legacy support in use) [ 491.142196] Monitor-Mwait will be used to enter C-3 state [ 491.143715] thinkpad_acpi: EC reports that Thermal Table has changed [ 491.401303] usb 5-1: new full speed USB device using uhci_hcd and address 2 [ 491.618056] usb 5-1: not running at top speed; connect to a high speed hub [ 491.628098] hub 5-1:1.0: USB hub found [ 491.630131] hub 5-1:1.0: 4 ports detected [ 491.941075] usb 5-1.3: new low speed USB device using uhci_hcd and address 3 [ 492.431289] usbcore: registered new interface driver hiddev [ 492.446388] input: Logitech USB Trackball as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1.3/5-1.3:1.0/input/input11 [ 492.446552] generic-usb 0003:046D:C408.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Trackball] on usb-0000:00:1a.2-1.3/input0 [ 492.446898] usbcore: registered new interface driver usbhid [ 492.446901] usbhid: USB HID core driver [ 492.481073] usb 5-1.2: new low speed USB device using uhci_hcd and address 4 [ 492.640334] input: HID 1267:0103 as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1.2/5-1.2:1.0/input/input12 [ 492.640416] generic-usb 0003:1267:0103.0002: input,hidraw1: USB HID v1.10 Keyboard [HID 1267:0103] on usb-0000:00:1a.2-1.2/input0 [ 492.662199] input: HID 1267:0103 as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1.2/5-1.2:1.1/input/input13 [ 492.662306] generic-usb 0003:1267:0103.0003: input,hidraw2: USB HID v1.10 Device [HID 1267:0103] on usb-0000:00:1a.2-1.2/input1 [ 493.052179] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [ 493.052183] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO [ 493.052453] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 493.135223] ata1: hard resetting link [ 493.481388] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 493.483559] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 493.483565] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 493.483732] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded [ 493.483737] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 493.506231] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 493.506236] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 493.506356] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded [ 493.506360] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 493.507788] ata1.00: configured for UDMA/133 [ 493.511690] ata1.00: configured for UDMA/133 [ 493.511695] ata1: EH complete [ 493.529903] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 493.932230] EXT4-fs (sda4): re-mounted. Opts: errors=remount-ro,commit=0 [ 503.111269] eth0: no IPv6 routers present [ 556.903558] Skipping EDID probe due to cached edid [ 1020.559674] iwlagn 0000:03:00.0: RF_KILL bit toggled to disable radio. [ 1020.559746] iwlagn 0000:03:00.0: Not sending command - RF KILL [ 1020.559750] iwlagn 0000:03:00.0: Error sending REPLY_QOS_PARAM: enqueue_hcmd failed: -5 [ 1020.559756] iwlagn 0000:03:00.0: Not sending command - RF KILL [ 1020.559758] iwlagn 0000:03:00.0: Error sending REPLY_RXON: enqueue_hcmd failed: -5 [ 1020.559761] iwlagn 0000:03:00.0: Error setting new RXON (-5) [ 1020.559763] iwlagn 0000:03:00.0: Not sending command - RF KILL [ 1020.559765] iwlagn 0000:03:00.0: Error sending REPLY_RXON_ASSOC: enqueue_hcmd failed: -5 [ 1020.559769] iwlagn 0000:03:00.0: Not sending command - RF KILL [ 1020.559771] iwlagn 0000:03:00.0: Error sending REPLY_REMOVE_STA: enqueue_hcmd failed: -5 [ 1020.559774] iwlagn 0000:03:00.0: Error removing station 00:13:10:fe:90:76 [ 1020.580072] wlan0: deauthenticating from 00:13:10:fe:90:76 by local choice (reason=3) [ 1020.580101] iwlagn 0000:03:00.0: Not sending command - RF KILL [ 1020.580104] iwlagn 0000:03:00.0: Error sending REPLY_RXON: enqueue_hcmd failed: -5 [ 1020.580107] iwlagn 0000:03:00.0: Error setting new RXON (-5) [ 1020.620049] iwlagn 0000:03:00.0: Not sending command - RF KILL [ 1020.620054] iwlagn 0000:03:00.0: Error sending REPLY_RXON: enqueue_hcmd failed: -5 [ 1020.620057] iwlagn 0000:03:00.0: Error setting new RXON (-5) [ 1020.703305] cfg80211: All devices are disconnected, going to restore regulatory settings [ 1020.703309] cfg80211: Restoring regulatory settings [ 1020.703311] cfg80211: Calling CRDA to update world regulatory domain [ 1022.796230] cfg80211: World regulatory domain updated: [ 1022.796234] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1022.796237] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1022.796239] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1022.796242] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1022.796244] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1022.796246] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1032.771332] usb 2-1: new high speed USB device using ehci_hcd and address 2 [ 1033.586259] Initializing USB Mass Storage driver... [ 1033.587278] scsi4 : usb-storage 2-1:1.0 [ 1033.587372] usbcore: registered new interface driver usb-storage [ 1033.587375] USB Mass Storage support registered. [ 1034.594672] scsi 4:0:0:0: Direct-Access OCZ DIESEL 1.00 PQ: 0 ANSI: 2 [ 1034.595523] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 1034.600287] sd 4:0:0:0: [sdb] 7864320 512-byte logical blocks: (4.02 GB/3.75 GiB) [ 1034.600768] sd 4:0:0:0: [sdb] Write Protect is off [ 1034.600771] sd 4:0:0:0: [sdb] Mode Sense: 03 00 00 00 [ 1034.600773] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 1034.602766] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 1034.602771] sdb: unknown partition table [ 1036.011776] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 1036.011782] sd 4:0:0:0: [sdb] Attached SCSI removable disk [ 1042.866848] Skipping EDID probe due to cached edid [ 1062.957500] Skipping EDID probe due to cached edid [ 1123.891680] iwlagn 0000:03:00.0: RF_KILL bit toggled to enable radio. [ 1127.180743] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 1135.096296] wlan0: authenticate with 00:13:10:fe:90:76 (try 1) [ 1135.098969] wlan0: authenticated [ 1135.099016] wlan0: associate with 00:13:10:fe:90:76 (try 1) [ 1135.101098] wlan0: RX AssocResp from 00:13:10:fe:90:76 (capab=0x401 status=0 aid=2) [ 1135.101100] wlan0: associated [ 1135.102716] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 1145.751330] wlan0: no IPv6 routers present [ 1876.120134] usb 2-1: USB disconnect, address 2 [ 4150.168725] Skipping EDID probe due to cached edid [ 4191.225950] Skipping EDID probe due to cached edid [ 4228.484063] Skipping EDID probe due to cached edid [ 4243.386844] Skipping EDID probe due to cached edid [ 4441.410870] show_signal_msg: 12 callbacks suppressed [ 4441.410874] nautilus-sendto[3737]: segfault at 0 ip (null) sp 00007fff703809e8 error 14 in nautilus-sendto[400000+6000] [ 5135.210084] wlan0: deauthenticating from 00:13:10:fe:90:76 by local choice (reason=3) [ 5135.250334] cfg80211: All devices are disconnected, going to restore regulatory settings [ 5135.250339] cfg80211: Restoring regulatory settings [ 5135.250342] cfg80211: Calling CRDA to update world regulatory domain [ 5143.024142] VirtualBox[3643]: segfault at 0 ip 00007fd4f9d97ddc sp 00007fff25856710 error 4 in libQtCore.so.4.7.0[7fd4f9d3b000+28f000] [ 5146.336373] cfg80211: World regulatory domain updated: [ 5146.336376] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 5146.336379] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5146.336381] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 5146.336383] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 5146.336386] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5146.336388] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5150.616781] Skipping EDID probe due to cached edid [ 5152.688138] Skipping EDID probe due to cached edid [ 5153.278162] Skipping EDID probe due to cached edid [ 5157.048125] Skipping EDID probe due to cached edid [ 5157.646897] Skipping EDID probe due to cached edid [ 5158.338114] Skipping EDID probe due to cached edid [ 5158.928109] Skipping EDID probe due to cached edid [ 5175.576502] Skipping EDID probe due to cached edid [ 5176.188136] Skipping EDID probe due to cached edid [ 5176.776990] Skipping EDID probe due to cached edid [ 5180.446636] Skipping EDID probe due to cached edid [ 5185.545749] Skipping EDID probe due to cached edid [ 5194.428168] wlan0: authenticate with 00:13:10:fe:90:76 (try 1) [ 5194.432202] wlan0: authenticated [ 5194.432260] wlan0: associate with 00:13:10:fe:90:76 (try 1) [ 5194.436162] wlan0: RX AssocResp from 00:13:10:fe:90:76 (capab=0x1 status=0 aid=2) [ 5194.436166] wlan0: associated [ 7215.870842] Skipping EDID probe due to cached edid [17210.664645] Skipping EDID probe due to cached edid [19815.170670] Skipping EDID probe due to cached edid [20734.087177] Skipping EDID probe due to cached edid [21205.277629] Skipping EDID probe due to cached edid [21207.431648] hub 2-0:1.0: unable to enumerate USB device on port 2 [21209.534013] usb 2-2: new high speed USB device using ehci_hcd and address 4 [21209.694843] scsi5 : usb-storage 2-2:1.0 [21210.693432] scsi 5:0:0:0: Direct-Access SanDisk Sansa Fuze 8GB v02. PQ: 0 ANSI: 0 [21210.693925] scsi 5:0:0:1: Direct-Access SanDisk Sansa Fuze 8GB v02. PQ: 0 ANSI: 0 [21210.694556] sd 5:0:0:0: Attached scsi generic sg2 type 0 [21210.694677] sd 5:0:0:1: Attached scsi generic sg3 type 0 [21210.697634] sd 5:0:0:0: [sdb] 15462400 512-byte logical blocks: (7.91 GB/7.37 GiB) [21210.709524] sd 5:0:0:1: [sdc] Attached SCSI removable disk [21210.710743] sd 5:0:0:0: [sdb] Write Protect is off [21210.710746] sd 5:0:0:0: [sdb] Mode Sense: 04 00 00 00 [21210.710749] sd 5:0:0:0: [sdb] Assuming drive cache: write through [21210.712505] sd 5:0:0:0: [sdb] Assuming drive cache: write through [21210.712512] sdb: [21210.719879] sd 5:0:0:0: [sdb] Assuming drive cache: write through [21210.719882] sd 5:0:0:0: [sdb] Attached SCSI removable disk [21343.837824] usb 2-2: USB disconnect, address 4 [21349.551416] usb 2-1: new high speed USB device using ehci_hcd and address 5 [21349.717883] scsi6 : usb-storage 2-1:1.0 [21350.721133] scsi 6:0:0:0: Direct-Access Motorola A855 0001 PQ: 0 ANSI: 2 [21350.727540] sd 6:0:0:0: Attached scsi generic sg2 type 0 [21350.736176] sd 6:0:0:0: [sdb] Attached SCSI removable disk [21369.700466] sd 6:0:0:0: [sdb] 31116288 512-byte logical blocks: (15.9 GB/14.8 GiB) [21369.701054] sd 6:0:0:0: [sdb] Assuming drive cache: write through [21369.705935] sd 6:0:0:0: [sdb] Assuming drive cache: write through [21369.705951] sdb: sdb1 [21434.702115] sd 6:0:0:0: [sdb] 31116288 512-byte logical blocks: (15.9 GB/14.8 GiB) [21434.702873] sd 6:0:0:0: [sdb] Assuming drive cache: write through [21434.705210] sd 6:0:0:0: [sdb] Assuming drive cache: write through [21434.705223] sdb: sdb1 [21443.703213] VFS: busy inodes on changed media or resized disk sr0 [21443.765612] VFS: busy inodes on changed media or resized disk sr0 [21443.818560] VFS: busy inodes on changed media or resized disk sr0 [21443.824288] VFS: busy inodes on changed media or resized disk sr0 [21443.901597] VFS: busy inodes on changed media or resized disk sr0 [21443.905885] VFS: busy inodes on changed media or resized disk sr0 [21443.913749] VFS: busy inodes on changed media or resized disk sr0 [21456.900198] sd 6:0:0:0: [sdb] Device not ready [21456.900206] sd 6:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [21456.900216] sd 6:0:0:0: [sdb] Sense Key : Not Ready [current] [21456.900226] sd 6:0:0:0: [sdb] Add. Sense: Medium not present [21456.900241] sd 6:0:0:0: [sdb] CDB: Write(10): 2a 00 01 41 2a 70 00 00 f0 00 [21456.900263] end_request: I/O error, dev sdb, sector 21047920 [21456.910982] sd 6:0:0:0: [sdb] Device not ready [21456.910990] sd 6:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [21456.911000] sd 6:0:0:0: [sdb] Sense Key : Not Ready [current] [21456.911010] sd 6:0:0:0: [sdb] Add. Sense: Medium not present [21456.911021] sd 6:0:0:0: [sdb] CDB: Write(10): 2a 00 01 41 2b 60 00 00 f0 00 [21456.911043] end_request: I/O error, dev sdb, sector 21048160 [21456.923046] sd 6:0:0:0: [sdb] Device not ready [21456.923054] sd 6:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [21456.923063] sd 6:0:0:0: [sdb] Sense Key : Not Ready [current] [21456.923074] sd 6:0:0:0: [sdb] Add. Sense: Medium not present [21456.923086] sd 6:0:0:0: [sdb] CDB: Write(10): 2a 00 01 41 2c 50 00 00 f0 00 [21456.923108] end_request: I/O error, dev sdb, sector 21048400 [21456.983255] FAT: unable to read inode block for updating (i_pos 305717301) [21456.983272] FAT: unable to read inode block for updating (i_pos 305717306) [21456.983285] FAT: unable to read inode block for updating (i_pos 305717311) [21674.021406] ata1.00: configured for UDMA/133 [21674.021416] ata1: EH complete [21674.369023] EXT4-fs (sda4): re-mounted. Opts: errors=remount-ro,commit=0 [21677.010152] wlan0: deauthenticating from 00:13:10:fe:90:76 by local choice (reason=3) [21677.023872] cfg80211: All devices are disconnected, going to restore regulatory settings [21677.023881] cfg80211: Restoring regulatory settings [21677.023889] cfg80211: Calling CRDA to update world regulatory domain [21677.496657] cfg80211: World regulatory domain updated: [21677.496660] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [21677.496663] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [21677.496666] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [21677.496668] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [21677.496670] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [21677.496672] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [21679.429296] PM: Syncing filesystems ... done. [21679.430418] PM: Preparing system for mem sleep [21679.880212] Freezing user space processes ... (elapsed 0.17 seconds) done. [21680.060136] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [21680.080128] PM: Entering mem sleep [21680.080232] Suspending console(s) (use no_console_suspend to debug) [21680.121544] sd 0:0:0:0: [sda] Synchronizing SCSI cache [21680.121760] sd 0:0:0:0: [sda] Stopping disk [21680.140747] ehci_hcd 0000:00:1d.7: PCI INT D disabled [21680.140759] uhci_hcd 0000:00:1d.2: PCI INT C disabled [21680.140770] uhci_hcd 0000:00:1d.1: PCI INT B disabled [21680.140781] uhci_hcd 0000:00:1d.0: PCI INT A disabled [21680.140789] pciehp 0000:00:1c.4:pcie04: pciehp_suspend ENTRY [21680.140796] pciehp 0000:00:1c.3:pcie04: pciehp_suspend ENTRY [21680.140819] pciehp 0000:00:1c.0:pcie04: pciehp_suspend ENTRY [21680.140861] ehci_hcd 0000:00:1a.7: PCI INT D disabled [21680.140872] uhci_hcd 0000:00:1a.2: PCI INT C disabled [21680.140883] uhci_hcd 0000:00:1a.1: PCI INT B disabled [21680.140893] uhci_hcd 0000:00:1a.0: PCI INT A disabled [21680.140941] ACPI handle has no context! [21680.141259] ACPI handle has no context! [21680.141266] sdhci-pci 0000:15:00.2: PCI INT C disabled [21680.141274] ACPI handle has no context! [21680.160068] ACPI handle has no context! [21680.160095] i915 0000:00:02.0: power state changed by ACPI to D3 [21680.160117] pciehp 0000:00:1c.1:pcie04: pciehp_suspend ENTRY [21680.222352] e1000e 0000:00:19.0: PME# enabled [21680.222359] e1000e 0000:00:19.0: wake-up capability enabled by ACPI [21680.250342] HDA Intel 0000:00:1b.0: PCI INT B disabled [21680.270017] PM: suspend of drv:HDA Intel dev:0000:00:1b.0 complete after 129.190 msecs [21680.484496] PM: suspend of drv:sd dev:0:0:0:0 complete after 362.961 msecs [21680.484507] PM: suspend of drv:scsi dev:target0:0:0 complete after 362.966 msecs [21680.484516] PM: suspend of drv:scsi dev:host0 complete after 362.947 msecs [21680.540016] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 399.320 msecs [21680.540026] PM: suspend of drv: dev:pci0000:00 complete after 398.807 msecs [21680.540034] PM: suspend of devices complete after 459.365 msecs [21680.540036] PM: suspend devices took 0.460 seconds [21680.581314] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3 [21680.601308] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D3 [21680.641308] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D3 [21680.661307] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D3 [21680.731298] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D3 [21680.731434] PM: late suspend of devices complete after 191.394 msecs [21680.831301] ACPI: Preparing to enter system sleep state S3 [21681.131329] PM: Saving platform NVS memory [21681.142768] Disabling non-boot CPUs ... [21681.300015] CPU 1 is now offline [21681.300018] SMP alternatives: switching to UP code [21681.306684] Extended CMOS year: 2000 [21681.306684] Back to C! [21681.306684] PM: Restoring platform NVS memory [21681.306684] Extended CMOS year: 2000 [21681.306684] Enabling non-boot CPUs ... [21681.306684] SMP alternatives: switching to SMP code [21681.313023] Booting Node 0 Processor 1 APIC 0x1 [21681.591265] CPU1 is up [21681.592186] ACPI: Waking up from system sleep state S3 [21682.093298] thinkpad_acpi: EC reports that Thermal Table has changed [21682.551454] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407) [21682.551478] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007) [21682.551490] pci 0000:00:03.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [21682.551500] pci 0000:00:03.0: restoring config space at offset 0x1 (was 0x100006, writing 0x180006) [21682.551513] serial 0000:00:03.3: restoring config space at offset 0xf (was 0x200, writing 0x20b) [21682.661299] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [21682.681306] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [21682.681334] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [21682.701306] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [21682.721306] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [21682.721310] PM: early resume of drv:uhci_hcd dev:0000:00:1a.0 complete after 169.734 msecs [21682.721340] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [21682.741306] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [21682.761306] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [21682.761334] uhci_hcd 0000:00:1a.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [21682.781306] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [21682.801306] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [21682.801343] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) [21682.821306] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [21682.841306] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [21682.841346] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102) [21682.841385] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x1fff1, writing 0x7c317c21) [21682.841390] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0xfff0, writing 0x7c107c00) [21682.841395] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0xf0, writing 0x8080) [21682.841406] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [21682.841460] pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x1fff1, writing 0x7c517c41) [21682.841466] pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0xf0, writing 0x9090) [21682.841477] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [21682.841541] pcieport 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [21682.841605] pcieport 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [21682.861306] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [21682.881306] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [21682.881334] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [21682.901306] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [21682.921306] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [21682.921336] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [21682.921375] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [21682.921421] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) [21682.941306] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [21682.961306] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [21682.961427] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407) [21682.961557] iwlagn 0000:03:00.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100506) [21682.980021] firewire_ohci 0000:15:00.1: BAR 0: set to [mem 0xf4801000-0xf48017ff] (PCI address [0xf4801000-0xf48017ff] [21682.980054] firewire_ohci 0000:15:00.1: restoring config space at offset 0x3 (was 0x800000, writing 0x802010) [21682.980062] firewire_ohci 0000:15:00.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106) [21683.000020] sdhci-pci 0000:15:00.2: BAR 0: set to [mem 0xf4801800-0xf48018ff] (PCI address [0xf4801800-0xf48018ff] [21683.000053] sdhci-pci 0000:15:00.2: restoring config space at offset 0x3 (was 0x800000, writing 0x802010) [21683.000060] sdhci-pci 0000:15:00.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106) [21683.020026] r852 0000:15:00.5: BAR 0: set to [mem 0xf4802400-0xf48024ff] (PCI address [0xf4802400-0xf48024ff] [21683.020059] r852 0000:15:00.5: restoring config space at offset 0x3 (was 0x800000, writing 0x802010) [21683.020066] r852 0000:15:00.5: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106) [21683.020529] PM: early resume of devices complete after 469.192 msecs [21683.031316] i915 0000:00:02.0: power state changed by ACPI to D0 [21683.031353] i915 0000:00:02.0: power state changed by ACPI to D0 [21683.031358] i915 0000:00:02.0: setting latency timer to 64 [21683.031401] e1000e 0000:00:19.0: wake-up capability disabled by ACPI [21683.031406] e1000e 0000:00:19.0: PME# disabled [21683.031478] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X [21683.033614] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [21683.033621] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [21683.033646] usb usb4: root hub lost power or was reset [21683.033729] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [21683.033735] HDA Intel 0000:00:1b.0: setting latency timer to 64 [21683.033772] HDA Intel 0000:00:1b.0: irq 48 for MSI/MSI-X [21683.033802] pciehp 0000:00:1c.0:pcie04: pciehp_resume ENTRY [21683.033807] pciehp 0000:00:1c.1:pcie04: pciehp_resume ENTRY [21683.033812] pciehp 0000:00:1c.3:pcie04: pciehp_resume ENTRY [21683.033817] pciehp 0000:00:1c.4:pcie04: pciehp_resume ENTRY [21683.033856] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [21683.033862] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [21683.033886] usb usb7: root hub lost power or was reset [21683.033906] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [21683.033911] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [21683.033934] usb usb8: root hub lost power or was reset [21683.033987] pci 0000:00:1e.0: setting latency timer to 64 [21683.034002] ahci 0000:00:1f.2: setting latency timer to 64 [21683.034098] sdhci-pci 0000:15:00.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [21683.034101] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. [21683.035379] sd 0:0:0:0: [sda] Starting disk [21683.042574] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [21683.042697] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [21683.042820] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [21683.042994] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [21683.043065] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [21683.043272] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [21683.043279] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [21683.043335] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [21683.043357] usb usb3: root hub lost power or was reset [21683.043666] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [21683.043672] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [21683.043674] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [21683.043684] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [21683.043698] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [21683.043719] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [21683.043740] usb usb5: root hub lost power or was reset [21683.043980] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [21683.043986] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [21683.043988] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [21683.043994] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [21683.043997] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [21683.044006] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [21683.044018] usb usb6: root hub lost power or was reset [21683.151383] firewire_core: skipped bus generations, destroying all nodes [21683.161618] PM: resume of drv:usb dev:2-1 complete after 126.080 msecs [21683.161630] PM: resume of drv:usb dev:2-1:1.1 complete after 126.039 msecs [21683.161650] PM: resume of drv:usb-storage dev:2-1:1.0 complete after 126.098 msecs [21683.161674] PM: resume of drv:scsi dev:host6 complete after 126.109 msecs [21683.161683] PM: resume of drv:scsi dev:target6:0:0 complete after 126.079 msecs [21683.161695] PM: resume of drv:sd dev:6:0:0:0 complete after 126.078 msecs [21683.161699] PM: resume of drv:scsi_host dev:host6 complete after 126.120 msecs [21683.161702] PM: resume of drv:scsi_device dev:6:0:0:0 complete after 126.072 msecs [21683.171343] PM: resume of drv:firewire_ohci dev:0000:15:00.1 complete after 137.260 msecs [21683.201297] PM: resume of drv:usb dev:usb3 complete after 166.104 msecs [21683.201304] PM: resume of drv:hub dev:3-0:1.0 complete after 166.098 msecs [21683.201332] PM: resume of drv:usb dev:usb7 complete after 166.029 msecs [21683.201350] PM: resume of drv:usb dev:usb4 complete after 166.131 msecs [21683.201368] PM: resume of drv:usb dev:usb8 complete after 166.036 msecs [21683.201405] PM: resume of drv:usb dev:usb6 complete after 166.129 msecs [21683.201411] PM: resume of drv:hub dev:6-0:1.0 complete after 166.122 msecs [21683.201420] PM: resume of drv:hub dev:8-0:1.0 complete after 166.071 msecs [21683.201425] PM: resume of drv:hub dev:4-0:1.0 complete after 166.188 msecs [21683.201430] PM: resume of drv:hub dev:7-0:1.0 complete after 166.112 msecs [21683.220100] PM: resume of drv:usb dev:usb1 complete after 184.962 msecs [21683.220127] PM: resume of drv:hub dev:1-0:1.0 complete after 184.973 msecs [21683.220154] PM: resume of drv: dev:ep_81 complete after 158.000 msecs [21683.320039] PM: resume of drv:usb dev:usb5 complete after 284.789 msecs [21683.320048] PM: resume of drv:hub dev:5-0:1.0 complete after 284.785 msecs [21683.322638] PM: resume of drv:usb dev:5-1 complete after 287.198 msecs [21683.322649] PM: resume of drv:hub dev:5-1:1.0 complete after 287.196 msecs [21683.322654] PM: resume of drv:usb dev:5-1.2 complete after 287.161 msecs [21683.322662] PM: resume of drv:usbhid dev:5-1.2:1.0 complete after 287.156 msecs [21683.322669] PM: resume of drv:usbhid dev:5-1.2:1.1 complete after 287.149 msecs [21683.322676] PM: resume of drv:usb dev:5-1.3 complete after 287.209 msecs [21683.322683] PM: resume of drv:usbhid dev:5-1.3:1.0 complete after 287.203 msecs [21683.386458] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [21683.389411] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded [21683.390212] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded [21683.396073] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded [21683.396850] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded [21683.398843] ata2.00: configured for UDMA/33 [21683.440069] PM: resume of drv:i915 dev:0000:00:02.0 complete after 408.791 msecs [21683.561354] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [21683.572697] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [21683.572701] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [21683.572859] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded [21683.572863] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [21683.586704] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [21683.586708] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [21683.586868] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded [21683.586872] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [21683.588246] ata1.00: configured for UDMA/133 [21683.605246] ata1.00: configured for UDMA/133 [21683.605250] ata1: EH complete [21683.610130] PM: resume of drv:sd dev:0:0:0:0 complete after 574.743 msecs [21683.610144] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 287.516 msecs [21683.610160] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 574.737 msecs [21683.650111] firewire_core: rediscovered device fw0 [21683.760033] PM: resume of drv:pcmcia_socket dev:pcmcia_socket0 complete after 149.786 msecs [21683.762535] PM: resume of devices complete after 741.953 msecs [21683.762744] PM: resume devices took 0.740 seconds [21683.762774] PM: Finishing wakeup. [21683.762775] Restarting tasks ... [21683.762825] usb 2-1: USB disconnect, address 5 [21683.764167] done. [21683.764177] video LNXVIDEO:00: Restoring backlight state [21683.791707] usb 5-1: USB disconnect, address 2 [21683.791710] usb 5-1.2: USB disconnect, address 4 [21683.930038] Skipping EDID probe due to cached edid [21683.961406] usb 5-1.3: USB disconnect, address 3 [21684.672038] ADDRCONF(NETDEV_UP): wlan0: link is not ready [21685.130174] Skipping EDID probe due to cached edid [21685.383500] ata1.00: configured for UDMA/133 [21685.383504] ata1: EH complete [21685.383596] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [21688.321779] EXT4-fs (sda4): re-mounted. Opts: errors=remount-ro,commit=600 [21688.736909] ata1: hard resetting link [21689.080060] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [21689.083547] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [21689.083553] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [21689.083620] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded [21689.083625] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [21689.124406] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [21689.124418] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [21689.124530] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded [21689.124539] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [21689.125841] ata1.00: configured for UDMA/133 [21689.129102] ata1.00: configured for UDMA/133 [21689.129110] ata1: EH complete [21689.174067] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [21689.690374] EXT4-fs (sda4): re-mounted. Opts: errors=remount-ro,commit=600 [21712.263711] wlan0: authenticate with 00:13:10:fe:90:76 (try 1) [21712.266839] wlan0: authenticated [21712.266933] wlan0: associate with 00:13:10:fe:90:76 (try 1) [21712.269237] wlan0: RX AssocResp from 00:13:10:fe:90:76 (capab=0x1 status=0 aid=2) [21712.269245] wlan0: associated [21712.273488] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [21722.580236] wlan0: no IPv6 routers present [21806.644955] iwlagn 0000:03:00.0: RF_KILL bit toggled to disable radio. [21806.645095] iwlagn 0000:03:00.0: Not sending command - RF KILL [21806.645103] iwlagn 0000:03:00.0: Error sending REPLY_QOS_PARAM: enqueue_hcmd failed: -5 [21806.645122] iwlagn 0000:03:00.0: Not sending command - RF KILL [21806.645128] iwlagn 0000:03:00.0: Error sending REPLY_RXON: enqueue_hcmd failed: -5 [21806.645135] iwlagn 0000:03:00.0: Error setting new RXON (-5) [21806.645209] iwlagn 0000:03:00.0: Not sending command - RF KILL [21806.645215] iwlagn 0000:03:00.0: Error sending REPLY_RXON_ASSOC: enqueue_hcmd failed: -5 [21806.645230] iwlagn 0000:03:00.0: Not sending command - RF KILL [21806.645236] iwlagn 0000:03:00.0: Error sending REPLY_REMOVE_STA: enqueue_hcmd failed: -5 [21806.645244] iwlagn 0000:03:00.0: Error removing station 00:13:10:fe:90:76 [21806.670151] wlan0: deauthenticating from 00:13:10:fe:90:76 by local choice (reason=3) [21806.670183] iwlagn 0000:03:00.0: Not sending command - RF KILL [21806.670187] iwlagn 0000:03:00.0: Error sending REPLY_RXON: enqueue_hcmd failed: -5 [21806.670191] iwlagn 0000:03:00.0: Error setting new RXON (-5) [21806.685721] iwlagn 0000:03:00.0: Not sending command - RF KILL [21806.685731] iwlagn 0000:03:00.0: Error sending REPLY_RXON: enqueue_hcmd failed: -5 [21806.685733] iwlagn 0000:03:00.0: Error setting new RXON (-5) [21806.723084] cfg80211: All devices are disconnected, going to restore regulatory settings [21806.723088] cfg80211: Restoring regulatory settings [21806.723092] cfg80211: Calling CRDA to update world regulatory domain [21806.726186] cfg80211: World regulatory domain updated: [21806.726188] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [21806.726191] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [21806.726193] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [21806.726196] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [21806.726198] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [21806.726200] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [21811.686571] iwlagn 0000:03:00.0: RF_KILL bit toggled to enable radio. [21811.909813] ADDRCONF(NETDEV_UP): wlan0: link is not ready [21818.294330] wlan0: authenticate with 00:13:10:fe:90:76 (try 1) [21818.297367] wlan0: authenticated [21818.297426] wlan0: associate with 00:13:10:fe:90:76 (try 1) [21818.299731] wlan0: RX AssocResp from 00:13:10:fe:90:76 (capab=0x1 status=0 aid=3) [21818.299740] wlan0: associated [21818.302200] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [21828.861308] wlan0: no IPv6 routers present [22998.152151] ata1: hard resetting link [22998.500048] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [22998.501891] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [22998.501898] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [22998.502217] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded [22998.502223] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [22998.513974] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [22998.513979] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [22998.514146] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded [22998.514151] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [22998.515586] ata1.00: configured for UDMA/133 [22998.519365] ata1.00: configured for UDMA/133 [22998.519369] ata1: EH complete [22999.025998] EXT4-fs (sda4): re-mounted. Opts: errors=remount-ro,commit=0 [23001.330213] wlan0: deauthenticating from 00:13:10:fe:90:76 by local choice (reason=3) [23001.455721] cfg80211: All devices are disconnected, going to restore regulatory settings [23001.455734] cfg80211: Restoring regulatory settings [23001.455741] cfg80211: Calling CRDA to update world regulatory domain [23001.851320] ADDRCONF(NETDEV_UP): wlan0: link is not ready [23002.002873] cfg80211: World regulatory domain updated: [23002.002881] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [23002.002889] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [23002.002897] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [23002.002903] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [23002.002910] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [23002.002917] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [23003.693131] PM: Syncing filesystems ... done. [23003.693693] PM: Preparing system for mem sleep [23004.190278] Freezing user space processes ... (elapsed 0.02 seconds) done. [23004.211417] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [23004.231376] PM: Entering mem sleep [23004.231467] Suspending console(s) (use no_console_suspend to debug) [23004.290319] ehci_hcd 0000:00:1d.7: PCI INT D disabled [23004.290331] uhci_hcd 0000:00:1d.2: PCI INT C disabled [23004.290342] uhci_hcd 0000:00:1d.1: PCI INT B disabled [23004.290353] uhci_hcd 0000:00:1d.0: PCI INT A disabled [23004.290361] pciehp 0000:00:1c.4:pcie04: pciehp_suspend ENTRY [23004.290368] pciehp 0000:00:1c.3:pcie04: pciehp_suspend ENTRY [23004.290390] pciehp 0000:00:1c.0:pcie04: pciehp_suspend ENTRY [23004.290428] ehci_hcd 0000:00:1a.7: PCI INT D disabled [23004.290439] uhci_hcd 0000:00:1a.2: PCI INT C disabled [23004.290451] uhci_hcd 0000:00:1a.1: PCI INT B disabled [23004.290462] uhci_hcd 0000:00:1a.0: PCI INT A disabled [23004.290507] ACPI handle has no context! [23004.290733] ACPI handle has no context! [23004.290740] sdhci-pci 0000:15:00.2: PCI INT C disabled [23004.290748] ACPI handle has no context! [23004.310058] ACPI handle has no context! [23004.310096] pciehp 0000:00:1c.1:pcie04: pciehp_suspend ENTRY [23004.310163] i915 0000:00:02.0: power state changed by ACPI to D3 [23004.372346] e1000e 0000:00:19.0: PME# enabled [23004.372353] e1000e 0000:00:19.0: wake-up capability enabled by ACPI [23004.400354] HDA Intel 0000:00:1b.0: PCI INT B disabled [23004.420015] PM: suspend of drv:HDA Intel dev:0000:00:1b.0 complete after 129.618 msecs [23004.480013] sd 0:0:0:0: [sda] Synchronizing SCSI cache [23004.480184] sd 0:0:0:0: [sda] Stopping disk [23004.783209] PM: suspend of drv:sd dev:0:0:0:0 complete after 511.641 msecs [23004.783219] PM: suspend of drv:scsi dev:target0:0:0 complete after 511.632 msecs [23004.783227] PM: suspend of drv:scsi dev:host0 complete after 511.605 msecs [23004.841262] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 550.992 msecs [23004.841271] PM: suspend of drv: dev:pci0000:00 complete after 550.508 msecs [23004.841278] PM: suspend of devices complete after 609.459 msecs [23004.841280] PM: suspend devices took 0.610 seconds [23004.881313] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3 [23004.901306] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D3 [23004.941306] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D3 [23004.961306] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D3 [23005.030053] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D3 [23005.030189] PM: late suspend of devices complete after 188.904 msecs [23005.130054] ACPI: Preparing to enter system sleep state S3 [23005.430085] PM: Saving platform NVS memory [23005.441497] Disabling non-boot CPUs ... [23005.560015] CPU 1 is now offline [23005.560018] SMP alternatives: switching to UP code [23005.566576] Extended CMOS year: 2000 [23005.566576] Back to C! [23005.566576] PM: Restoring platform NVS memory [23005.566576] Extended CMOS year: 2000 [23005.566576] Enabling non-boot CPUs ... [23005.566576] SMP alternatives: switching to SMP code [23005.572974] Booting Node 0 Processor 1 APIC 0x1 [23005.831265] CPU1 is up [23005.832185] ACPI: Waking up from system sleep state S3 [23006.661453] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407) [23006.661477] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007) [23006.661489] pci 0000:00:03.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [23006.661499] pci 0000:00:03.0: restoring config space at offset 0x1 (was 0x100006, writing 0x180006) [23006.661512] serial 0000:00:03.3: restoring config space at offset 0xf (was 0x200, writing 0x20b) [23006.771298] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [23006.791306] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [23006.791333] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [23006.811305] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [23006.831305] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [23006.831310] PM: early resume of drv:uhci_hcd dev:0000:00:1a.0 complete after 169.734 msecs [23006.831339] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [23006.851306] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [23006.871305] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [23006.871333] uhci_hcd 0000:00:1a.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [23006.891305] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [23006.911305] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [23006.911342] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) [23006.931306] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [23006.951305] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [23006.951345] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102) [23006.951384] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x1fff1, writing 0x7c317c21) [23006.951389] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0xfff0, writing 0x7c107c00) [23006.951393] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0xf0, writing 0x8080) [23006.951405] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [23006.951459] pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x1fff1, writing 0x7c517c41) [23006.951465] pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0xf0, writing 0x9090) [23006.951476] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [23006.951540] pcieport 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [23006.951603] pcieport 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [23006.971306] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [23006.991305] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [23006.991333] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [23007.011310] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [23007.031305] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [23007.031336] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [23007.031375] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [23007.031420] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) [23007.051305] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [23007.071305] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [23007.071426] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407) [23007.071556] iwlagn 0000:03:00.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100506) [23007.091267] firewire_ohci 0000:15:00.1: BAR 0: set to [mem 0xf4801000-0xf48017ff] (PCI address [0xf4801000-0xf48017ff] [23007.091301] firewire_ohci 0000:15:00.1: restoring config space at offset 0x3 (was 0x800000, writing 0x802010) [23007.091308] firewire_ohci 0000:15:00.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106) [23007.111265] sdhci-pci 0000:15:00.2: BAR 0: set to [mem 0xf4801800-0xf48018ff] (PCI address [0xf4801800-0xf48018ff] [23007.111298] sdhci-pci 0000:15:00.2: restoring config space at offset 0x3 (was 0x800000, writing 0x802010) [23007.111305] sdhci-pci 0000:15:00.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106) [23007.131265] r852 0000:15:00.5: BAR 0: set to [mem 0xf4802400-0xf48024ff] (PCI address [0xf4802400-0xf48024ff] [23007.131298] r852 0000:15:00.5: restoring config space at offset 0x3 (was 0x800000, writing 0x802010) [23007.131306] r852 0000:15:00.5: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106) [23007.131726] PM: early resume of devices complete after 470.390 msecs [23007.141315] i915 0000:00:02.0: power state changed by ACPI to D0 [23007.141352] i915 0000:00:02.0: power state changed by ACPI to D0 [23007.141357] i915 0000:00:02.0: setting latency timer to 64 [23007.141400] e1000e 0000:00:19.0: wake-up capability disabled by ACPI [23007.141405] e1000e 0000:00:19.0: PME# disabled [23007.141476] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X [23007.143611] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [23007.143617] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [23007.143641] usb usb4: root hub lost power or was reset [23007.143724] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [23007.143730] HDA Intel 0000:00:1b.0: setting latency timer to 64 [23007.143768] HDA Intel 0000:00:1b.0: irq 48 for MSI/MSI-X [23007.143798] pciehp 0000:00:1c.0:pcie04: pciehp_resume ENTRY [23007.143803] pciehp 0000:00:1c.1:pcie04: pciehp_resume ENTRY [23007.143809] pciehp 0000:00:1c.3:pcie04: pciehp_resume ENTRY [23007.143813] pciehp 0000:00:1c.4:pcie04: pciehp_resume ENTRY [23007.143853] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [23007.143859] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [23007.143882] usb usb7: root hub lost power or was reset [23007.143903] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [23007.143908] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [23007.143931] usb usb8: root hub lost power or was reset [23007.143984] pci 0000:00:1e.0: setting latency timer to 64 [23007.143999] ahci 0000:00:1f.2: setting latency timer to 64 [23007.144097] sdhci-pci 0000:15:00.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [23007.144099] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. [23007.145375] sd 0:0:0:0: [sda] Starting disk [23007.153538] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [23007.153684] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [23007.153804] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [23007.153989] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [23007.154110] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [23007.154364] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [23007.154371] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [23007.154384] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [23007.154421] usb usb3: root hub lost power or was reset [23007.154875] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [23007.154879] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [23007.154881] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [23007.154886] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [23007.154888] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [23007.154894] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [23007.154914] usb usb5: root hub lost power or was reset [23007.154933] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [23007.154939] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [23007.154945] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [23007.154973] usb usb6: root hub lost power or was reset [23007.155017] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [23007.155024] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [23007.155030] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [23007.280075] firewire_core: skipped bus generations, destroying all nodes [23007.300044] PM: resume of drv:firewire_ohci dev:0000:15:00.1 complete after 155.963 msecs [23007.301366] PM: resume of drv:usb dev:usb4 complete after 156.147 msecs [23007.301388] PM: resume of drv:usb dev:usb8 complete after 156.057 msecs [23007.301394] PM: resume of drv:hub dev:4-0:1.0 complete after 156.158 msecs [23007.301398] PM: resume of drv:hub dev:8-0:1.0 complete after 156.050 msecs [23007.301421] PM: resume of drv:usb dev:usb7 complete after 156.120 msecs [23007.301453] PM: resume of drv:hub dev:7-0:1.0 complete after 156.134 msecs [23007.311362] PM: resume of drv:usb dev:usb3 complete after 166.170 msecs [23007.311384] PM: resume of drv:usb dev:usb5 complete after 166.135 msecs [23007.311389] PM: resume of drv:hub dev:3-0:1.0 complete after 166.183 msecs [23007.311392] PM: resume of drv:hub dev:5-0:1.0 complete after 166.130 msecs [23007.311398] PM: resume of drv: dev:ep_81 complete after 121.198 msecs [23007.311412] PM: resume of drv:usb dev:usb6 complete after 166.137 msecs [23007.311421] PM: resume of drv:hub dev:6-0:1.0 complete after 166.132 msecs [23007.321510] PM: resume of drv:i915 dev:0000:00:02.0 complete after 180.235 msecs [23007.491364] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [23007.494433] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded [23007.495210] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded [23007.501023] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded [23007.501859] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded [23007.503850] ata2.00: configured for UDMA/33 [23007.781373] firewire_core: rediscovered device fw0 [23007.791420] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [23007.793094] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [23007.793098] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [23007.793283] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded [23007.793287] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [23007.819163] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [23007.819168] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [23007.819290] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded [23007.819294] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [23007.820673] ata1.00: configured for UDMA/133 [23007.842862] ata1.00: configured for UDMA/133 [23007.842865] ata1: EH complete [23007.853768] PM: resume of drv:sd dev:0:0:0:0 complete after 708.385 msecs [23007.853781] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 539.637 msecs [23007.853799] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 708.384 msecs [23008.000045] PM: resume of drv:pcmcia_socket dev:pcmcia_socket0 complete after 146.159 msecs [23008.002491] PM: resume of devices complete after 870.713 msecs [23008.002675] PM: resume devices took 0.870 seconds [23008.002705] PM: Finishing wakeup. [23008.002707] Restarting tasks ... done. [23008.009726] video LNXVIDEO:00: Restoring backlight state [23008.130607] ADDRCONF(NETDEV_UP): wlan0: link is not ready [23008.210064] Skipping EDID probe due to cached edid [23009.279375] ata1.00: configured for UDMA/133 [23009.279379] ata1: EH complete [23009.279496] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [23009.709563] EXT4-fs (sda4): re-mounted. Opts: errors=remount-ro,commit=600 [23015.452752] wlan0: authenticate with 00:0f:61:ba:9b:30 (try 1) [23015.456282] wlan0: authenticated [23015.456352] wlan0: associate with 00:0f:61:ba:9b:30 (try 1) [23015.458882] wlan0: RX AssocResp from 00:0f:61:ba:9b:30 (capab=0xc31 status=0 aid=2) [23015.458890] wlan0: associated [23015.462337] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [23015.609027] Intel AES-NI instructions are not detected. [23015.648798] padlock: VIA PadLock not detected. [23026.070250] wlan0: no IPv6 routers present [24085.011326] CE: hpet increased min_delta_ns to 7500 nsec [24278.195283] thinkpad_acpi: EC reports that Thermal Table has changed [24280.146052] ata1: hard resetting link [24280.491428] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [24280.493306] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [24280.493317] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [24280.493510] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded [24280.493519] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [24280.508580] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [24280.508591] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [24280.508712] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded [24280.508721] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [24280.510060] ata1.00: configured for UDMA/133 [24280.513684] ata1.00: configured for UDMA/133 [24280.513692] ata1: EH complete [24280.514198] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [24280.718926] EXT4-fs (sda4): re-mounted. Opts: errors=remount-ro,commit=0 [24401.101333] No probe response from AP 00:0f:61:ba:9b:30 after 500ms, disconnecting. [24401.161577] iwlagn 0000:03:00.0: ACTIVATE a non DRIVER active station id 0 addr 00:0f:61:ba:9b:30 [24401.230169] cfg80211: All devices are disconnected, going to restore regulatory settings [24401.230182] cfg80211: Restoring regulatory settings [24401.230189] cfg80211: Calling CRDA to update world regulatory domain [24401.513735] cfg80211: World regulatory domain updated: [24401.513739] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [24401.513742] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [24401.513744] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [24401.513746] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [24401.513748] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [24401.513750] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [24404.691728] wlan0: authenticate with 00:0f:61:ba:9b:30 (try 1) [24404.890125] wlan0: authenticate with 00:0f:61:ba:9b:30 (try 2) [24405.090135] wlan0: authenticate with 00:0f:61:ba:9b:30 (try 3) [24405.290102] wlan0: authentication with 00:0f:61:ba:9b:30 timed out [24420.497715] wlan0: authenticate with 00:0f:61:ba:1d:b0 (try 1) [24420.691405] wlan0: authenticate with 00:0f:61:ba:1d:b0 (try 2) [24420.703334] wlan0: authenticated [24420.703397] wlan0: associate with 00:0f:61:ba:1d:b0 (try 1) [24420.705986] wlan0: RX AssocResp from 00:0f:61:ba:1d:b0 (capab=0xc31 status=0 aid=5) [24420.705993] wlan0: associated [25037.970444] iwlagn 0000:03:00.0: ACTIVATE a non DRIVER active station id 0 addr 00:0f:61:ba:1d:b0 [25038.010122] wlan0: deauthenticating from 00:0f:61:ba:1d:b0 by local choice (reason=3) [25038.012832] wlan0: direct probe to 00:0f:61:b9:9e:20 (try 1) [25038.210701] wlan0: direct probe to 00:0f:61:b9:9e:20 (try 2) [25038.410128] wlan0: direct probe to 00:0f:61:b9:9e:20 (try 3) [25038.610067] wlan0: direct probe to 00:0f:61:b9:9e:20 timed out [25051.264239] wlan0: authenticate with 00:0f:61:ba:1d:b0 (try 1) [25051.460825] wlan0: authenticate with 00:0f:61:ba:1d:b0 (try 2) [25051.660065] wlan0: authenticate with 00:0f:61:ba:1d:b0 (try 3) [25051.661820] wlan0: authenticated [25051.661860] wlan0: associate with 00:0f:61:ba:1d:b0 (try 1) [25051.665599] wlan0: RX AssocResp from 00:0f:61:ba:1d:b0 (capab=0xc31 status=0 aid=5) [25051.665603] wlan0: associated [25157.010192] iwlagn 0000:03:00.0: ACTIVATE a non DRIVER active station id 0 addr 00:0f:61:ba:1d:b0 [25157.050257] wlan0: deauthenticating from 00:0f:61:ba:1d:b0 by local choice (reason=3) [25157.055754] wlan0: direct probe to 00:0f:61:b9:9e:20 (try 1) [25157.250055] wlan0: direct probe to 00:0f:61:b9:9e:20 (try 2) [25157.450065] wlan0: direct probe to 00:0f:61:b9:9e:20 (try 3) [25157.650044] wlan0: direct probe to 00:0f:61:b9:9e:20 timed out [25170.231295] wlan0: authenticate with 00:0f:61:ba:1d:b0 (try 1) [25170.232768] wlan0: authenticated [25170.232789] wlan0: associate with 00:0f:61:ba:1d:b0 (try 1) [25170.236480] wlan0: RX AssocResp from 00:0f:61:ba:1d:b0 (capab=0xc31 status=0 aid=1) [25170.236484] wlan0: associated [25921.748832] lo: Disabled Privacy Extensions [26287.366531] ptrace of non-child pid 7581 was attempted by: gdb (pid 7598) [27390.643516] thinkpad_acpi: EC reports that Thermal Table has changed [27391.056864] ata1.00: configured for UDMA/133 [27391.056878] ata1: EH complete [27391.057460] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [27391.755757] EXT4-fs (sda4): re-mounted. Opts: errors=remount-ro,commit=600 [27438.270314] No probe response from AP 00:0f:61:ba:1d:b0 after 500ms, disconnecting. [27438.380343] cfg80211: All devices are disconnected, going to restore regulatory settings [27438.380356] cfg80211: Restoring regulatory settings [27438.380372] cfg80211: Calling CRDA to update world regulatory domain [27439.985679] cfg80211: World regulatory domain updated: [27439.985682] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [27439.985685] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [27439.985687] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [27439.985689] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [27439.985692] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [27439.985694] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [27443.096580] wlan0: authenticate with 00:0f:61:ba:99:50 (try 1) [27443.098368] wlan0: authenticated [27443.098425] wlan0: associate with 00:0f:61:ba:99:50 (try 1) [27443.100993] wlan0: RX AssocResp from 00:0f:61:ba:99:50 (capab=0xc31 status=0 aid=5) [27443.101002] wlan0: associated [27597.071490] thinkpad_acpi: EC reports that Thermal Table has changed [27598.602454] ata1: hard resetting link [27598.950131] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [27598.952456] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [27598.952467] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [27598.952652] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded [27598.952662] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [27598.965108] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [27598.965119] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [27598.965318] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded [27598.965327] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [27598.966865] ata1.00: configured for UDMA/133 [27598.969976] ata1.00: configured for UDMA/133 [27598.969984] ata1: EH complete [27598.970321] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [27599.099322] EXT4-fs (sda4): re-mounted. Opts: errors=remount-ro,commit=0 [27746.900566] ata1.00: configured for UDMA/133 [27746.900577] ata1: EH complete [27748.439839] EXT4-fs (sda4): re-mounted. Opts: errors=remount-ro,commit=0 [27750.600115] iwlagn 0000:03:00.0: ACTIVATE a non DRIVER active station id 0 addr 00:0f:61:ba:99:50 [27750.620334] wlan0: deauthenticating from 00:0f:61:ba:99:50 by local choice (reason=3) [27750.642634] cfg80211: All devices are disconnected, going to restore regulatory settings [27750.642644] cfg80211: Restoring regulatory settings [27750.642652] cfg80211: Calling CRDA to update world regulatory domain [27751.231105] cfg80211: World regulatory domain updated: [27751.231108] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [27751.231111] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [27751.231113] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [27751.231116] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [27751.231118] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [27751.231120] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [27752.962591] PM: Syncing filesystems ... done. [27752.963335] PM: Preparing system for mem sleep [27753.430324] Freezing user space processes ... (elapsed 0.02 seconds) done. [27753.451389] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [27753.471371] PM: Entering mem sleep [27753.471463] Suspending console(s) (use no_console_suspend to debug) [27753.511571] sd 0:0:0:0: [sda] Synchronizing SCSI cache [27753.511756] sd 0:0:0:0: [sda] Stopping disk [27753.528782] ehci_hcd 0000:00:1d.7: PCI INT D disabled [27753.528794] uhci_hcd 0000:00:1d.2: PCI INT C disabled [27753.528805] uhci_hcd 0000:00:1d.1: PCI INT B disabled [27753.528816] uhci_hcd 0000:00:1d.0: PCI INT A disabled [27753.528824] pciehp 0000:00:1c.4:pcie04: pciehp_suspend ENTRY [27753.528831] pciehp 0000:00:1c.3:pcie04: pciehp_suspend ENTRY [27753.528852] pciehp 0000:00:1c.0:pcie04: pciehp_suspend ENTRY [27753.528890] ehci_hcd 0000:00:1a.7: PCI INT D disabled [27753.528901] uhci_hcd 0000:00:1a.2: PCI INT C disabled [27753.528912] uhci_hcd 0000:00:1a.1: PCI INT B disabled [27753.528923] uhci_hcd 0000:00:1a.0: PCI INT A disabled [27753.528968] ACPI handle has no context! [27753.529308] ACPI handle has no context! [27753.529315] sdhci-pci 0000:15:00.2: PCI INT C disabled [27753.529322] ACPI handle has no context! [27753.540066] ACPI handle has no context! [27753.540088] i915 0000:00:02.0: power state changed by ACPI to D3 [27753.540113] pciehp 0000:00:1c.1:pcie04: pciehp_suspend ENTRY [27753.602341] e1000e 0000:00:19.0: PME# enabled [27753.602348] e1000e 0000:00:19.0: wake-up capability enabled by ACPI [27753.630354] HDA Intel 0000:00:1b.0: PCI INT B disabled [27753.650017] PM: suspend of drv:HDA Intel dev:0000:00:1b.0 complete after 121.152 msecs [27753.806322] PM: suspend of drv:sd dev:0:0:0:0 complete after 294.754 msecs [27753.806331] PM: suspend of drv:scsi dev:target0:0:0 complete after 294.727 msecs [27753.806339] PM: suspend of drv:scsi dev:host0 complete after 294.702 msecs [27753.860017] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 331.281 msecs [27753.860026] PM: suspend of drv: dev:pci0000:00 complete after 330.786 msecs [27753.860034] PM: suspend of devices complete after 388.226 msecs [27753.860036] PM: suspend devices took 0.390 seconds [27753.901314] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3 [27753.921307] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D3 [27753.961307] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D3 [27753.981307] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D3 [27754.051299] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D3 [27754.051434] PM: late suspend of devices complete after 191.394 msecs [27754.150052] ACPI: Preparing to enter system sleep state S3 [27754.450079] PM: Saving platform NVS memory [27754.461305] Disabling non-boot CPUs ... [27754.580011] CPU 1 is now offline [27754.580014] SMP alternatives: switching to UP code [27754.586555] Extended CMOS year: 2000 [27754.586555] Back to C! [27754.586555] PM: Restoring platform NVS memory [27754.586555] Extended CMOS year: 2000 [27754.586555] Enabling non-boot CPUs ... [27754.586555] SMP alternatives: switching to SMP code [27754.592963] Booting Node 0 Processor 1 APIC 0x1 [27754.861266] CPU1 is up [27754.862195] ACPI: Waking up from system sleep state S3 [27755.363297] thinkpad_acpi: EC reports that Thermal Table has changed [27755.821454] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407) [27755.821479] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007) [27755.821490] pci 0000:00:03.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [27755.821500] pci 0000:00:03.0: restoring config space at offset 0x1 (was 0x100006, writing 0x180006) [27755.821513] serial 0000:00:03.3: restoring config space at offset 0xf (was 0x200, writing 0x20b) [27755.931298] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [27755.951306] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [27755.951334] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [27755.971306] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [27755.991306] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [27755.991310] PM: early resume of drv:uhci_hcd dev:0000:00:1a.0 complete after 169.732 msecs [27755.991339] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [27756.011310] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [27756.031306] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [27756.031334] uhci_hcd 0000:00:1a.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [27756.051306] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [27756.071306] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [27756.071343] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) [27756.091306] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [27756.111306] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [27756.111346] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102) [27756.111385] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x1fff1, writing 0x7c317c21) [27756.111390] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0xfff0, writing 0x7c107c00) [27756.111395] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0xf0, writing 0x8080) [27756.111406] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [27756.111460] pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x1fff1, writing 0x7c517c41) [27756.111466] pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0xf0, writing 0x9090) [27756.111478] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [27756.111543] pcieport 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [27756.111606] pcieport 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [27756.131306] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [27756.151306] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [27756.151334] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [27756.171306] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [27756.191306] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [27756.191336] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [27756.191375] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [27756.191421] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) [27756.211305] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [27756.231306] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [27756.231427] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407) [27756.231559] iwlagn 0000:03:00.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100506) [27756.250021] firewire_ohci 0000:15:00.1: BAR 0: set to [mem 0xf4801000-0xf48017ff] (PCI address [0xf4801000-0xf48017ff] [27756.250054] firewire_ohci 0000:15:00.1: restoring config space at offset 0x3 (was 0x800000, writing 0x802010) [27756.250062] firewire_ohci 0000:15:00.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106) [27756.270020] sdhci-pci 0000:15:00.2: BAR 0: set to [mem 0xf4801800-0xf48018ff] (PCI address [0xf4801800-0xf48018ff] [27756.270052] sdhci-pci 0000:15:00.2: restoring config space at offset 0x3 (was 0x800000, writing 0x802010) [27756.270060] sdhci-pci 0000:15:00.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106) [27756.290019] r852 0000:15:00.5: BAR 0: set to [mem 0xf4802400-0xf48024ff] (PCI address [0xf4802400-0xf48024ff] [27756.290052] r852 0000:15:00.5: restoring config space at offset 0x3 (was 0x800000, writing 0x802010) [27756.290059] r852 0000:15:00.5: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106) [27756.290482] PM: early resume of devices complete after 469.144 msecs [27756.301315] i915 0000:00:02.0: power state changed by ACPI to D0 [27756.301352] i915 0000:00:02.0: power state changed by ACPI to D0 [27756.301357] i915 0000:00:02.0: setting latency timer to 64 [27756.301400] e1000e 0000:00:19.0: wake-up capability disabled by ACPI [27756.301405] e1000e 0000:00:19.0: PME# disabled [27756.301478] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X [27756.303612] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [27756.303618] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [27756.303643] usb usb4: root hub lost power or was reset [27756.303726] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [27756.303732] HDA Intel 0000:00:1b.0: setting latency timer to 64 [27756.303770] HDA Intel 0000:00:1b.0: irq 48 for MSI/MSI-X [27756.303800] pciehp 0000:00:1c.0:pcie04: pciehp_resume ENTRY [27756.303805] pciehp 0000:00:1c.1:pcie04: pciehp_resume ENTRY [27756.303810] pciehp 0000:00:1c.3:pcie04: pciehp_resume ENTRY [27756.303815] pciehp 0000:00:1c.4:pcie04: pciehp_resume ENTRY [27756.303854] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [27756.303860] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [27756.303883] usb usb7: root hub lost power or was reset [27756.303904] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [27756.303910] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [27756.303932] usb usb8: root hub lost power or was reset [27756.303985] pci 0000:00:1e.0: setting latency timer to 64 [27756.304000] ahci 0000:00:1f.2: setting latency timer to 64 [27756.304097] sdhci-pci 0000:15:00.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [27756.304100] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. [27756.305375] sd 0:0:0:0: [sda] Starting disk [27756.312422] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [27756.312781] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [27756.312827] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [27756.313323] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [27756.313539] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [27756.314008] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [27756.314011] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [27756.314015] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [27756.314017] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [27756.314023] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [27756.314026] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [27756.314055] usb usb3: root hub lost power or was reset [27756.314057] usb usb5: root hub lost power or was reset [27756.314249] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [27756.314254] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [27756.314257] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [27756.314259] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [27756.314264] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [27756.314267] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [27756.314293] usb usb6: root hub lost power or was reset [27756.314356] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [27756.314363] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [27756.314369] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [27756.441355] PM: resume of drv:firewire_ohci dev:0000:15:00.1 complete after 137.273 msecs [27756.441389] firewire_core: skipped bus generations, destroying all nodes [27756.471369] PM: resume of drv:usb dev:usb4 complete after 166.150 msecs [27756.471378] PM: resume of drv:hub dev:4-0:1.0 complete after 166.143 msecs [27756.471382] PM: resume of drv:usb dev:usb7 complete after 166.078 msecs [27756.471394] PM: resume of drv:hub dev:7-0:1.0 complete after 166.077 msecs [27756.471409] PM: resume of drv:usb dev:usb3 complete after 166.218 msecs [27756.471417] PM: resume of drv:usb dev:usb8 complete after 166.087 msecs [27756.471426] PM: resume of drv:hub dev:3-0:1.0 complete after 166.221 msecs [27756.471431] PM: resume of drv:usb dev:usb6 complete after 166.157 msecs [27756.471435] PM: resume of drv:hub dev:8-0:1.0 complete after 166.089 msecs [27756.471440] PM: resume of drv: dev:ep_81 complete after 110.063 msecs [27756.471444] PM: resume of drv:hub dev:6-0:1.0 complete after 166.155 msecs [27756.471473] PM: resume of drv:usb dev:usb5 complete after 166.226 msecs [27756.471481] PM: resume of drv:hub dev:5-0:1.0 complete after 166.221 msecs [27756.481510] PM: resume of drv:i915 dev:0000:00:02.0 complete after 180.234 msecs [27756.651364] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [27756.654562] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded [27756.655495] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded [27756.661552] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded [27756.662324] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded [27756.664296] ata2.00: configured for UDMA/33 [27756.831361] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [27756.839847] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [27756.839851] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [27756.839948] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded [27756.839952] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [27756.854992] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [27756.854996] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [27756.855159] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded [27756.855164] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [27756.856547] ata1.00: configured for UDMA/133 [27756.875150] ata1.00: configured for UDMA/133 [27756.875153] ata1: EH complete [27756.888843] PM: resume of drv:sd dev:0:0:0:0 complete after 583.460 msecs [27756.888857] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 414.430 msecs [27756.888873] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 583.456 msecs [27756.940119] firewire_core: rediscovered device fw0 [27757.030099] PM: resume of drv:pcmcia_socket dev:pcmcia_socket0 complete after 141.144 msecs [27757.032508] PM: resume of devices complete after 741.972 msecs [27757.032698] PM: resume devices took 0.740 seconds [27757.032726] PM: Finishing wakeup. [27757.032730] Restarting tasks ... done. [27757.036278] video LNXVIDEO:00: Restoring backlight state [27757.140622] ADDRCONF(NETDEV_UP): wlan0: link is not ready [27758.274420] ata1.00: configured for UDMA/133 [27758.274425] ata1: EH complete [27758.301406] Skipping EDID probe due to cached edid [27758.322821] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [27760.593375] EXT4-fs (sda4): re-mounted. Opts: errors=remount-ro,commit=600 [27761.377746] ata1: hard resetting link [27761.720045] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [27761.722678] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [27761.722684] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [27761.722751] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded [27761.722756] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [27761.779504] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [27761.779509] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [27761.779596] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded [27761.779601] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [27761.780891] ata1.00: configured for UDMA/133 [27761.784198] ata1.00: configured for UDMA/133 [27761.784202] ata1: EH complete [27761.897207] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [27763.797324] EXT4-fs (sda4): re-mounted. Opts: errors=remount-ro,commit=600 [27765.640658] wlan0: authenticate with 00:0f:61:ba:9b:30 (try 1) [27765.643349] wlan0: authenticated [27765.643406] wlan0: associate with 00:0f:61:ba:9b:30 (try 1) [27765.645904] wlan0: RX AssocResp from 00:0f:61:ba:9b:30 (capab=0xc31 status=0 aid=3) [27765.645912] wlan0: associated [27765.648827] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [27776.521270] wlan0: no IPv6 routers present [27969.281542] No probe response from AP 00:0f:61:ba:9b:30 after 500ms, disconnecting. [27969.380274] cfg80211: All devices are disconnected, going to restore regulatory settings [27969.380287] cfg80211: Restoring regulatory settings [27969.380295] cfg80211: Calling CRDA to update world regulatory domain [27969.785829] cfg80211: World regulatory domain updated: [27969.785832] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [27969.785835] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [27969.785837] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [27969.785839] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [27969.785842] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [27969.785844] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [27972.673912] wlan0: authenticate with 00:0f:61:ba:9b:30 (try 1) [27972.871381] wlan0: authenticate with 00:0f:61:ba:9b:30 (try 2) [27973.071548] wlan0: authenticate with 00:0f:61:ba:9b:30 (try 3) [27973.271400] wlan0: authentication with 00:0f:61:ba:9b:30 timed out [27988.895332] wlan0: authenticate with 00:0f:61:ba:9a:d0 (try 1) [27988.898239] wlan0: authenticated [27988.898294] wlan0: associate with 00:0f:61:ba:9a:d0 (try 1) [27988.900843] wlan0: RX AssocResp from 00:0f:61:ba:9a:d0 (capab=0xc31 status=0 aid=2) [27988.900851] wlan0: associated [28064.830270] wlan0: deauthenticating from 00:0f:61:ba:9a:d0 by local choice (reason=3) [28064.834670] wlan0: authenticate with 00:0f:61:ba:99:50 (try 1) [28064.837006] wlan0: authenticated [28064.900861] wlan0: associate with 00:0f:61:ba:99:50 (try 1) [28064.903508] wlan0: RX AssocResp from 00:0f:61:ba:99:50 (capab=0xc31 status=0 aid=6) [28064.903517] wlan0: associated [29025.267532] Skipping EDID probe due to cached edid [29428.040242] Skipping EDID probe due to cached edid