[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-22-generic (buildd@yellow) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #33-Ubuntu SMP Wed Apr 28 13:28:05 UTC 2010 (Ubuntu 2.6.32-22.33-generic 2.6.32.11+drm33.2) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-22-generic root=/dev/sda2 loop=/ubuntu/disks/root.disk ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e3000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cff90000 (usable) [ 0.000000] BIOS-e820: 00000000cff90000 - 00000000cffa8000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cffa8000 - 00000000cffe0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cffe0000 - 00000000d0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable) [ 0.000000] DMI present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x120000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000120000000 aka 4608M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xcff90 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009f000 (usable) [ 0.000000] modified: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e3000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000cff90000 (usable) [ 0.000000] modified: 00000000cff90000 - 00000000cffa8000 (ACPI data) [ 0.000000] modified: 00000000cffa8000 - 00000000cffe0000 (ACPI NVS) [ 0.000000] modified: 00000000cffe0000 - 00000000d0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fef00000 (reserved) [ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000120000000 (usable) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: 0000000000000000-00000000cff90000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0000000000 - 00c0000000 page 1G [ 0.000000] 00c0000000 - 00cfe00000 page 2M [ 0.000000] 00cfe00000 - 00cff90000 page 4k [ 0.000000] kernel direct mapping tables up to cff90000 @ 10000-13000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000120000000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0100000000 - 0120000000 page 2M [ 0.000000] kernel direct mapping tables up to 120000000 @ 12000-14000 [ 0.000000] RAMDISK: 377b2000 - 37fef2f1 [ 0.000000] ACPI: RSDP 00000000000fbbb0 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 00000000cff90000 00044 (v01 052509 RSDT1121 20090525 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000cff90200 00084 (v01 052509 FACP1121 20090525 MSFT 00000097) [ 0.000000] ACPI: DSDT 00000000cff90450 0BF1B (v01 A1191 A1191001 00000001 INTL 20051117) [ 0.000000] ACPI: FACS 00000000cffa8000 00040 [ 0.000000] ACPI: APIC 00000000cff90390 00080 (v01 052509 APIC1121 20090525 MSFT 00000097) [ 0.000000] ACPI: MCFG 00000000cff90410 0003C (v01 052509 OEMMCFG 20090525 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000cffa8040 00073 (v01 052509 OEMB1121 20090525 MSFT 00000097) [ 0.000000] ACPI: HPET 00000000cff9c370 00038 (v01 052509 OEMHPET0 20090525 MSFT 00000097) [ 0.000000] ACPI: INFO 00000000cffa80c0 00124 (v01 052509 AMDINFO 20090525 MSFT 00000097) [ 0.000000] ACPI: NVHD 00000000cffa81f0 00284 (v01 052509 NVHDCP 20090525 MSFT 00000097) [ 0.000000] ACPI: SSDT 00000000cff9c3b0 00544 (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000120000000 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000120000000 [ 0.000000] NODE_DATA [0000000000013000 - 0000000000017fff] [ 0.000000] bootmap [0000000000018000 - 000000000003bfff] pages 24 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0120000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 0001a29e64] TEXT DATA BSS ==> [0001000000 - 0001a29e64] [ 0.000000] #3 [00377b2000 - 0037fef2f1] RAMDISK ==> [00377b2000 - 0037fef2f1] [ 0.000000] #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] [ 0.000000] #5 [0001a2a000 - 0001a2a290] BRK ==> [0001a2a000 - 0001a2a290] [ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] [ 0.000000] #7 [0000012000 - 0000013000] PGTABLE ==> [0000012000 - 0000013000] [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780 [ 0.000000] [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff880028600000-ffff88002bbfffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00120000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000cff90 [ 0.000000] 0: 0x00100000 -> 0x00120000 [ 0.000000] On node 0 totalpages: 982815 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 103 pages reserved [ 0.000000] DMA zone: 3824 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 833480 pages, LIFO batch:31 [ 0.000000] Normal zone: 1792 pages used for memmap [ 0.000000] Normal zone: 129280 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x2008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e3000 [ 0.000000] PM: Registered nosave memory: 00000000000e3000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000cff90000 - 00000000cffa8000 [ 0.000000] PM: Registered nosave memory: 00000000cffa8000 - 00000000cffe0000 [ 0.000000] PM: Registered nosave memory: 00000000cffe0000 - 00000000d0000000 [ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fef00000 [ 0.000000] PM: Registered nosave memory: 00000000fef00000 - 00000000fff00000 [ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:2ec00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880028200000 s91544 r8192 d23144 u524288 [ 0.000000] pcpu-alloc: s91544 r8192 d23144 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 966584 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-22-generic root=/dev/sda2 loop=/ubuntu/disks/root.disk ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ 20000000 size 32 MB [ 0.000000] Aperture pointing to e820 RAM. Ignoring. [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ 20000000 [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000024000000 [ 0.000000] Memory: 3790864k/4718592k available (5409k kernel code, 787332k absent, 140396k reserved, 2976k data, 876k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:440 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 39321600 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2300.105 MHz processor. [ 0.020007] Calibrating delay loop (skipped), value calculated using timer frequency.. 4600.20 BogoMIPS (lpj=23001020) [ 0.020031] Security Framework initialized [ 0.020051] AppArmor: AppArmor initialized [ 0.020496] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.022372] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.030555] Mount-cache hash table entries: 256 [ 0.030685] Initializing cgroup subsys ns [ 0.030689] Initializing cgroup subsys cpuacct [ 0.030693] Initializing cgroup subsys memory [ 0.030701] Initializing cgroup subsys devices [ 0.030703] Initializing cgroup subsys freezer [ 0.030705] Initializing cgroup subsys net_cls [ 0.030725] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.030727] CPU: L2 Cache: 512K (64 bytes/line) [ 0.030730] CPU 0/0x0 -> Node 0 [ 0.030733] tseg: 0000000000 [ 0.030754] CPU: Physical Processor ID: 0 [ 0.030755] CPU: Processor Core ID: 0 [ 0.030758] mce: CPU supports 6 MCE banks [ 0.030769] using C1E aware idle routine [ 0.030771] Performance Events: AMD PMU driver. [ 0.030776] ... version: 0 [ 0.030778] ... bit width: 48 [ 0.030779] ... generic registers: 4 [ 0.030781] ... value mask: 0000ffffffffffff [ 0.030783] ... max period: 00007fffffffffff [ 0.030785] ... fixed-purpose events: 0 [ 0.030786] ... event mask: 000000000000000f [ 0.032462] ACPI: Core revision 20090903 [ 0.049195] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.049201] ftrace: allocating 22518 entries in 89 pages [ 0.050075] Setting APIC routing to flat [ 0.050550] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.156152] CPU0: AMD Phenom(tm) 9600 Quad-Core Processor stepping 02 [ 0.160000] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.030000] Initializing CPU#1 [ 0.030000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.030000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.030000] CPU 1/0x1 -> Node 0 [ 0.030000] CPU: Physical Processor ID: 0 [ 0.030000] CPU: Processor Core ID: 1 [ 0.310049] CPU1: AMD Phenom(tm) 9600 Quad-Core Processor stepping 02 [ 0.310060] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.320064] Booting processor 2 APIC 0x2 ip 0x6000 [ 0.030000] Initializing CPU#2 [ 0.030000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.030000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.030000] CPU 2/0x2 -> Node 0 [ 0.030000] CPU: Physical Processor ID: 0 [ 0.030000] CPU: Processor Core ID: 2 [ 0.480079] CPU2: AMD Phenom(tm) 9600 Quad-Core Processor stepping 02 [ 0.480089] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 0.490059] Booting processor 3 APIC 0x3 ip 0x6000 [ 0.030000] Initializing CPU#3 [ 0.030000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.030000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.030000] CPU 3/0x3 -> Node 0 [ 0.030000] CPU: Physical Processor ID: 0 [ 0.030000] CPU: Processor Core ID: 3 [ 0.650037] CPU3: AMD Phenom(tm) 9600 Quad-Core Processor stepping 02 [ 0.650047] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 0.660011] Brought up 4 CPUs [ 0.660013] Total of 4 processors activated (18399.63 BogoMIPS). [ 0.661004] CPU0 attaching sched-domain: [ 0.661007] domain 0: span 0-3 level MC [ 0.661009] groups: 0 1 2 3 [ 0.661015] CPU1 attaching sched-domain: [ 0.661016] domain 0: span 0-3 level MC [ 0.661018] groups: 1 2 3 0 [ 0.661022] CPU2 attaching sched-domain: [ 0.661024] domain 0: span 0-3 level MC [ 0.661026] groups: 2 3 0 1 [ 0.661031] CPU3 attaching sched-domain: [ 0.661032] domain 0: span 0-3 level MC [ 0.661034] groups: 3 0 1 2 [ 0.661140] devtmpfs: initialized [ 0.661140] regulator: core version 0.5 [ 0.661140] Time: 11:12:57 Date: 05/20/10 [ 0.661140] NET: Registered protocol family 16 [ 0.661140] node 0 link 0: io port [1000, ffffff] [ 0.661140] Trying to unpack rootfs image as initramfs... [ 0.661140] node 0 link 0: io port [2000, 2fff] [ 0.661140] TOM: 00000000e0000000 aka 3584M [ 0.661140] Fam 10h mmconf [e0000000, efffffff] [ 0.661140] node 0 link 0: mmio [e0000000, efffffff] ==> none [ 0.661140] node 0 link 0: mmio [a0000, bffff] [ 0.661140] node 0 link 0: mmio [e0000000, fe0bffff] ==> [f0000000, fe0bffff] [ 0.661140] TOM2: 0000000120000000 aka 4608M [ 0.661140] bus: [00,07] on node 0 link 0 [ 0.661140] bus: 00 index 0 io port: [0, ffff] [ 0.661140] bus: 00 index 1 mmio: [a0000, bffff] [ 0.661140] bus: 00 index 2 mmio: [f0000000, ffffffff] [ 0.661140] bus: 00 index 3 mmio: [120000000, fcffffffff] [ 0.661140] ACPI: bus type pci registered [ 0.661140] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.661140] PCI: Not using MMCONFIG. [ 0.661140] PCI: Using configuration type 1 for base access [ 0.661140] PCI: Using configuration type 1 for extended access [ 0.661140] bio: create slab at 0 [ 0.661140] ACPI: EC: Look up EC in DSDT [ 0.671146] ACPI: Executed 1 blocks of module-level executable AML code [ 0.805394] ACPI: Interpreter enabled [ 0.805400] ACPI: (supports S0 S1 S3 S4 S5) [ 0.805422] ACPI: Using IOAPIC for interrupt routing [ 0.805492] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.813364] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources [ 0.820978] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.837961] ACPI Warning: Incorrect checksum in table [OEMB] - 4F, should be 46 (20090903/tbutils-314) [ 0.838207] ACPI: No dock devices found. [ 0.838693] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.838962] pci 0000:00:01.0: reg 10 io port: [0x2f00-0x2fff] [ 0.839002] pci 0000:00:01.1: reg 10 io port: [0x2900-0x293f] [ 0.839013] pci 0000:00:01.1: reg 20 io port: [0x2d00-0x2d3f] [ 0.839017] pci 0000:00:01.1: reg 24 io port: [0x2e00-0x2e3f] [ 0.839037] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.839043] pci 0000:00:01.1: PME# disabled [ 0.839100] pci 0000:00:01.3: reg 10 32bit mmio: [0xfad80000-0xfadfffff] [ 0.839227] pci 0000:00:02.0: reg 10 32bit mmio: [0xfad7e000-0xfad7efff] [ 0.839250] pci 0000:00:02.0: supports D1 D2 [ 0.839252] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.839255] pci 0000:00:02.0: PME# disabled [ 0.839277] pci 0000:00:02.1: reg 10 32bit mmio: [0xfad7fc00-0xfad7fcff] [ 0.839305] pci 0000:00:02.1: supports D1 D2 [ 0.839306] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.839309] pci 0000:00:02.1: PME# disabled [ 0.839336] pci 0000:00:04.0: reg 10 32bit mmio: [0xfad7d000-0xfad7dfff] [ 0.839358] pci 0000:00:04.0: supports D1 D2 [ 0.839360] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.839363] pci 0000:00:04.0: PME# disabled [ 0.839388] pci 0000:00:04.1: reg 10 32bit mmio: [0xfad7f800-0xfad7f8ff] [ 0.839415] pci 0000:00:04.1: supports D1 D2 [ 0.839416] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.839420] pci 0000:00:04.1: PME# disabled [ 0.839454] pci 0000:00:06.0: reg 20 io port: [0xffa0-0xffaf] [ 0.839485] pci 0000:00:07.0: reg 10 32bit mmio: [0xfad78000-0xfad7bfff] [ 0.839508] pci 0000:00:07.0: PME# supported from D3hot D3cold [ 0.839511] pci 0000:00:07.0: PME# disabled [ 0.839564] pci 0000:00:09.0: reg 10 io port: [0xd480-0xd487] [ 0.839568] pci 0000:00:09.0: reg 14 io port: [0xd400-0xd403] [ 0.839571] pci 0000:00:09.0: reg 18 io port: [0xd080-0xd087] [ 0.839575] pci 0000:00:09.0: reg 1c io port: [0xd000-0xd003] [ 0.839578] pci 0000:00:09.0: reg 20 io port: [0xcc00-0xcc0f] [ 0.839582] pci 0000:00:09.0: reg 24 32bit mmio: [0xfad76000-0xfad77fff] [ 0.839619] pci 0000:00:0a.0: reg 10 32bit mmio: [0xfad7c000-0xfad7cfff] [ 0.839623] pci 0000:00:0a.0: reg 14 io port: [0xc880-0xc887] [ 0.839626] pci 0000:00:0a.0: reg 18 32bit mmio: [0xfad7f400-0xfad7f4ff] [ 0.839630] pci 0000:00:0a.0: reg 1c 32bit mmio: [0xfad7f000-0xfad7f00f] [ 0.839650] pci 0000:00:0a.0: supports D1 D2 [ 0.839652] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.839656] pci 0000:00:0a.0: PME# disabled [ 0.839688] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.839691] pci 0000:00:0b.0: PME# disabled [ 0.839935] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.839942] pci 0000:00:10.0: PME# disabled [ 0.840233] pci 0000:00:13.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.840240] pci 0000:00:13.0: PME# disabled [ 0.840513] pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.840520] pci 0000:00:14.0: PME# disabled [ 0.840666] pci 0000:01:05.0: reg 10 32bit mmio: [0xfaef0000-0xfaefffff] [ 0.840729] pci 0000:00:08.0: transparent bridge [ 0.840734] pci 0000:00:08.0: bridge 32bit mmio: [0xfae00000-0xfaefffff] [ 0.840755] pci 0000:02:00.0: reg 10 32bit mmio: [0xfb000000-0xfbffffff] [ 0.840760] pci 0000:02:00.0: reg 14 64bit mmio pref: [0xf0000000-0xf7ffffff] [ 0.840766] pci 0000:02:00.0: reg 1c 64bit mmio pref: [0xf8000000-0xf9ffffff] [ 0.840769] pci 0000:02:00.0: reg 24 io port: [0xec00-0xec7f] [ 0.840773] pci 0000:02:00.0: reg 30 32bit mmio pref: [0xfafe0000-0xfaffffff] [ 0.840800] pci 0000:00:0b.0: bridge io port: [0xe000-0xefff] [ 0.840802] pci 0000:00:0b.0: bridge 32bit mmio: [0xfaf00000-0xfbffffff] [ 0.840806] pci 0000:00:0b.0: bridge 64bit mmio pref: [0xf0000000-0xf9ffffff] [ 0.841057] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.841359] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.841514] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IXVE._PRT] [ 0.841591] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MXR0._PRT] [ 0.841671] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR13._PRT] [ 0.841745] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR14._PRT] [ 0.844362] Freeing initrd memory: 8436k freed [ 0.864625] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *10 [ 0.864940] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled. [ 0.865255] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled. [ 0.865559] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled. [ 0.865872] ACPI: PCI Interrupt Link [LN0A] (IRQs 16 17 18 19) *10 [ 0.866185] ACPI: PCI Interrupt Link [LN0B] (IRQs 16 17 18 19) *0, disabled. [ 0.866494] ACPI: PCI Interrupt Link [LN0C] (IRQs 16 17 18 19) *0, disabled. [ 0.866802] ACPI: PCI Interrupt Link [LN0D] (IRQs 16 17 18 19) *0, disabled. [ 0.867110] ACPI: PCI Interrupt Link [LN1A] (IRQs 16 17 18 19) *0, disabled. [ 0.867418] ACPI: PCI Interrupt Link [LN1B] (IRQs 16 17 18 19) *0, disabled. [ 0.867721] ACPI: PCI Interrupt Link [LN1C] (IRQs 16 17 18 19) *0, disabled. [ 0.868029] ACPI: PCI Interrupt Link [LN1D] (IRQs 16 17 18 19) *0, disabled. [ 0.868339] ACPI: PCI Interrupt Link [LN2A] (IRQs 16 17 18 19) *0, disabled. [ 0.868647] ACPI: PCI Interrupt Link [LN2B] (IRQs 16 17 18 19) *0, disabled. [ 0.868956] ACPI: PCI Interrupt Link [LN2C] (IRQs 16 17 18 19) *0, disabled. [ 0.869265] ACPI: PCI Interrupt Link [LN2D] (IRQs 16 17 18 19) *0, disabled. [ 0.869576] ACPI: PCI Interrupt Link [LN3A] (IRQs 16 17 18 19) *11 [ 0.869886] ACPI: PCI Interrupt Link [LN3B] (IRQs 16 17 18 19) *0, disabled. [ 0.870204] ACPI: PCI Interrupt Link [LN3C] (IRQs 16 17 18 19) *0, disabled. [ 0.870513] ACPI: PCI Interrupt Link [LN3D] (IRQs 16 17 18 19) *0, disabled. [ 0.870823] ACPI: PCI Interrupt Link [LN4A] (IRQs 16 17 18 19) *15 [ 0.871132] ACPI: PCI Interrupt Link [LN4B] (IRQs 16 17 18 19) *0, disabled. [ 0.871441] ACPI: PCI Interrupt Link [LN4C] (IRQs 16 17 18 19) *0, disabled. [ 0.871750] ACPI: PCI Interrupt Link [LN4D] (IRQs 16 17 18 19) *0, disabled. [ 0.872058] ACPI: PCI Interrupt Link [LN5A] (IRQs 16 17 18 19) *0, disabled. [ 0.872362] ACPI: PCI Interrupt Link [LN5B] (IRQs 16 17 18 19) *0, disabled. [ 0.872672] ACPI: PCI Interrupt Link [LN5C] (IRQs 16 17 18 19) *0, disabled. [ 0.872986] ACPI: PCI Interrupt Link [LN5D] (IRQs 16 17 18 19) *0, disabled. [ 0.873298] ACPI: PCI Interrupt Link [LN6A] (IRQs 16 17 18 19) *0, disabled. [ 0.873602] ACPI: PCI Interrupt Link [LN6B] (IRQs 16 17 18 19) *0, disabled. [ 0.873915] ACPI: PCI Interrupt Link [LN6C] (IRQs 16 17 18 19) *0, disabled. [ 0.874227] ACPI: PCI Interrupt Link [LN6D] (IRQs 16 17 18 19) *0, disabled. [ 0.874535] ACPI: PCI Interrupt Link [LN7A] (IRQs 16 17 18 19) *0, disabled. [ 0.874844] ACPI: PCI Interrupt Link [LN7B] (IRQs 16 17 18 19) *0, disabled. [ 0.875154] ACPI: PCI Interrupt Link [LN7C] (IRQs 16 17 18 19) *0, disabled. [ 0.875459] ACPI: PCI Interrupt Link [LN7D] (IRQs 16 17 18 19) *0, disabled. [ 0.875773] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *10 [ 0.876086] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *15 [ 0.876395] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *10 [ 0.876708] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *15 [ 0.877019] ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *7 [ 0.877332] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11 [ 0.877645] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *10 [ 0.877958] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5 [ 0.878316] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled. [ 0.878629] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *11 [ 0.878944] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *10 [ 0.879085] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.879088] vgaarb: loaded [ 0.879191] SCSI subsystem initialized [ 0.879252] libata version 3.00 loaded. [ 0.879252] usbcore: registered new interface driver usbfs [ 0.879252] usbcore: registered new interface driver hub [ 0.879252] usbcore: registered new device driver usb [ 0.879252] ACPI: WMI: Mapper loaded [ 0.879252] PCI: Using ACPI for IRQ routing [ 0.879252] NetLabel: Initializing [ 0.879252] NetLabel: domain hash size = 128 [ 0.879252] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.879252] NetLabel: unlabeled traffic allowed by default [ 0.879252] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 [ 0.879252] hpet0: 3 comparators, 32-bit 25.000000 MHz counter [ 0.910005] Switching to clocksource tsc [ 0.911504] AppArmor: AppArmor Filesystem Enabled [ 0.911516] pnp: PnP ACPI init [ 0.911529] ACPI: bus type pnp registered [ 0.920545] pnp: PnP ACPI: found 13 devices [ 0.920547] ACPI: ACPI bus type pnp unregistered [ 0.920560] system 00:05: ioport range 0x4d0-0x4d1 has been reserved [ 0.920563] system 00:05: ioport range 0x800-0x80f has been reserved [ 0.920566] system 00:05: ioport range 0x2000-0x207f has been reserved [ 0.920568] system 00:05: ioport range 0x2080-0x20ff has been reserved [ 0.920571] system 00:05: ioport range 0x2400-0x247f has been reserved [ 0.920573] system 00:05: ioport range 0x2480-0x24ff has been reserved [ 0.920576] system 00:05: ioport range 0x2800-0x287f has been reserved [ 0.920578] system 00:05: ioport range 0x2880-0x28ff has been reserved [ 0.920582] system 00:05: iomem range 0xfed04000-0xfed04fff has been reserved [ 0.920585] system 00:05: iomem range 0xfee01000-0xfeefffff has been reserved [ 0.920590] system 00:08: ioport range 0xc00-0xc0f has been reserved [ 0.920593] system 00:08: ioport range 0xd00-0xd0f has been reserved [ 0.920595] system 00:08: ioport range 0xa20-0xa2f has been reserved [ 0.920598] system 00:08: ioport range 0xa30-0xa3f has been reserved [ 0.920602] system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.920605] system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.920610] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved [ 0.920615] system 00:0c: iomem range 0x0-0x9ffff could not be reserved [ 0.920617] system 00:0c: iomem range 0xc0000-0xcffff has been reserved [ 0.920620] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved [ 0.920622] system 00:0c: iomem range 0x100000-0xdfffffff could not be reserved [ 0.920625] system 00:0c: iomem range 0xfec00000-0xffffffff could not be reserved [ 0.925384] pci 0000:00:08.0: PCI bridge, secondary bus 0000:01 [ 0.925386] pci 0000:00:08.0: IO window: disabled [ 0.925390] pci 0000:00:08.0: MEM window: 0xfae00000-0xfaefffff [ 0.925393] pci 0000:00:08.0: PREFETCH window: disabled [ 0.925397] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:02 [ 0.925399] pci 0000:00:0b.0: IO window: 0xe000-0xefff [ 0.925402] pci 0000:00:0b.0: MEM window: 0xfaf00000-0xfbffffff [ 0.925405] pci 0000:00:0b.0: PREFETCH window: 0x000000f0000000-0x000000f9ffffff [ 0.925409] pci 0000:00:10.0: PCI bridge, secondary bus 0000:03 [ 0.925411] pci 0000:00:10.0: IO window: disabled [ 0.925420] pci 0000:00:10.0: MEM window: disabled [ 0.925426] pci 0000:00:10.0: PREFETCH window: disabled [ 0.925439] pci 0000:00:13.0: PCI bridge, secondary bus 0000:04 [ 0.925440] pci 0000:00:13.0: IO window: disabled [ 0.925449] pci 0000:00:13.0: MEM window: disabled [ 0.925456] pci 0000:00:13.0: PREFETCH window: disabled [ 0.925468] pci 0000:00:14.0: PCI bridge, secondary bus 0000:05 [ 0.925470] pci 0000:00:14.0: IO window: disabled [ 0.925479] pci 0000:00:14.0: MEM window: disabled [ 0.925486] pci 0000:00:14.0: PREFETCH window: disabled [ 0.925503] pci 0000:00:08.0: setting latency timer to 64 [ 0.925508] pci 0000:00:0b.0: setting latency timer to 64 [ 0.925945] ACPI: PCI Interrupt Link [LN0A] enabled at IRQ 19 [ 0.925948] alloc irq_desc for 19 on node 0 [ 0.925950] alloc kstat_irqs on node 0 [ 0.925958] pci 0000:00:10.0: PCI INT A -> Link[LN0A] -> GSI 19 (level, low) -> IRQ 19 [ 0.925966] pci 0000:00:10.0: setting latency timer to 64 [ 0.926388] ACPI: PCI Interrupt Link [LN3A] enabled at IRQ 18 [ 0.926390] alloc irq_desc for 18 on node 0 [ 0.926392] alloc kstat_irqs on node 0 [ 0.926398] pci 0000:00:13.0: PCI INT A -> Link[LN3A] -> GSI 18 (level, low) -> IRQ 18 [ 0.926406] pci 0000:00:13.0: setting latency timer to 64 [ 0.926825] ACPI: PCI Interrupt Link [LN4A] enabled at IRQ 17 [ 0.926827] alloc irq_desc for 17 on node 0 [ 0.926828] alloc kstat_irqs on node 0 [ 0.926835] pci 0000:00:14.0: PCI INT A -> Link[LN4A] -> GSI 17 (level, low) -> IRQ 17 [ 0.926843] pci 0000:00:14.0: setting latency timer to 64 [ 0.926849] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.926851] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.926854] pci_bus 0000:01: resource 1 mem: [0xfae00000-0xfaefffff] [ 0.926857] pci_bus 0000:01: resource 3 io: [0x00-0xffff] [ 0.926859] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.926862] pci_bus 0000:02: resource 0 io: [0xe000-0xefff] [ 0.926864] pci_bus 0000:02: resource 1 mem: [0xfaf00000-0xfbffffff] [ 0.926866] pci_bus 0000:02: resource 2 pref mem [0xf0000000-0xf9ffffff] [ 0.926902] NET: Registered protocol family 2 [ 0.927070] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.928462] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.932118] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.932580] TCP: Hash tables configured (established 524288 bind 65536) [ 0.932582] TCP reno registered [ 0.932687] NET: Registered protocol family 1 [ 1.009945] pci 0000:00:08.0: Enabling HT MSI Mapping [ 1.010048] pci 0000:00:09.0: Enabling HT MSI Mapping [ 1.010157] pci 0000:00:0a.0: Enabling HT MSI Mapping [ 1.010264] pci 0000:00:0b.0: Enabling HT MSI Mapping [ 1.010443] pci 0000:02:00.0: Boot video device [ 1.010686] PCI-DMA: Disabling AGP. [ 1.010811] PCI-DMA: aperture base @ 20000000 size 65536 KB [ 1.010813] PCI-DMA: using GART IOMMU. [ 1.010817] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 1.012672] Scanning for low memory corruption every 60 seconds [ 1.012800] audit: initializing netlink socket (disabled) [ 1.012812] type=2000 audit(1274353977.009:1): initialized [ 1.020481] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.021794] VFS: Disk quotas dquot_6.5.2 [ 1.021846] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.022407] fuse init (API version 7.13) [ 1.022487] msgmni has been set to 7420 [ 1.022735] alg: No test for stdrng (krng) [ 1.022787] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.022790] io scheduler noop registered [ 1.022791] io scheduler anticipatory registered [ 1.022793] io scheduler deadline registered [ 1.022824] io scheduler cfq registered (default) [ 1.023207] alloc irq_desc for 24 on node 0 [ 1.023209] alloc kstat_irqs on node 0 [ 1.023229] pcieport 0000:00:10.0: irq 24 for MSI/MSI-X [ 1.023248] pcieport 0000:00:10.0: setting latency timer to 64 [ 1.023652] alloc irq_desc for 25 on node 0 [ 1.023653] alloc kstat_irqs on node 0 [ 1.023670] pcieport 0000:00:13.0: irq 25 for MSI/MSI-X [ 1.023688] pcieport 0000:00:13.0: setting latency timer to 64 [ 1.024110] alloc irq_desc for 26 on node 0 [ 1.024111] alloc kstat_irqs on node 0 [ 1.024127] pcieport 0000:00:14.0: irq 26 for MSI/MSI-X [ 1.024145] pcieport 0000:00:14.0: setting latency timer to 64 [ 1.024336] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.024362] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.024475] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.024478] ACPI: Power Button [PWRB] [ 1.024530] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.024533] ACPI: Power Button [PWRF] [ 1.024937] processor LNXCPU:00: registered as cooling_device0 [ 1.024967] processor LNXCPU:01: registered as cooling_device1 [ 1.024994] processor LNXCPU:02: registered as cooling_device2 [ 1.025021] processor LNXCPU:03: registered as cooling_device3 [ 1.033861] Linux agpgart interface v0.103 [ 1.033893] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.033989] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.034253] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.035145] brd: module loaded [ 1.035538] loop: module loaded [ 1.035618] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 1.035824] pata_acpi 0000:00:06.0: setting latency timer to 64 [ 1.036313] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23 [ 1.036316] alloc irq_desc for 23 on node 0 [ 1.036318] alloc kstat_irqs on node 0 [ 1.036326] pata_acpi 0000:00:09.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23 [ 1.036339] pata_acpi 0000:00:09.0: setting latency timer to 64 [ 1.036345] pata_acpi 0000:00:09.0: PCI INT A disabled [ 1.036649] Fixed MDIO Bus: probed [ 1.036678] PPP generic driver version 2.4.2 [ 1.036708] tun: Universal TUN/TAP device driver, 1.6 [ 1.036710] tun: (C) 1999-2004 Max Krasnyansky [ 1.036780] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.037221] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22 [ 1.037224] alloc irq_desc for 22 on node 0 [ 1.037225] alloc kstat_irqs on node 0 [ 1.037232] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 22 (level, low) -> IRQ 22 [ 1.037261] ehci_hcd 0000:00:02.1: setting latency timer to 64 [ 1.037263] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 1.037326] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 1.037353] ehci_hcd 0000:00:02.1: debug port 1 [ 1.037361] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported [ 1.037381] ehci_hcd 0000:00:02.1: irq 22, io mem 0xfad7fc00 [ 1.049813] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00 [ 1.049900] usb usb1: configuration #1 chosen from 1 choice [ 1.049927] hub 1-0:1.0: USB hub found [ 1.049933] hub 1-0:1.0: 6 ports detected [ 1.050435] ACPI: PCI Interrupt Link [UB12] enabled at IRQ 21 [ 1.050438] alloc irq_desc for 21 on node 0 [ 1.050439] alloc kstat_irqs on node 0 [ 1.050447] ehci_hcd 0000:00:04.1: PCI INT B -> Link[UB12] -> GSI 21 (level, low) -> IRQ 21 [ 1.050457] ehci_hcd 0000:00:04.1: setting latency timer to 64 [ 1.050459] ehci_hcd 0000:00:04.1: EHCI Host Controller [ 1.050492] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2 [ 1.050510] ehci_hcd 0000:00:04.1: debug port 1 [ 1.050517] ehci_hcd 0000:00:04.1: cache line size of 64 is not supported [ 1.050532] ehci_hcd 0000:00:04.1: irq 21, io mem 0xfad7f800 [ 1.069834] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00 [ 1.069896] usb usb2: configuration #1 chosen from 1 choice [ 1.069917] hub 2-0:1.0: USB hub found [ 1.069922] hub 2-0:1.0: 6 ports detected [ 1.069980] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.070438] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 20 [ 1.070441] alloc irq_desc for 20 on node 0 [ 1.070443] alloc kstat_irqs on node 0 [ 1.070450] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 20 (level, low) -> IRQ 20 [ 1.070459] ohci_hcd 0000:00:02.0: setting latency timer to 64 [ 1.070462] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 1.070493] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3 [ 1.070514] ohci_hcd 0000:00:02.0: irq 20, io mem 0xfad7e000 [ 1.132078] usb usb3: configuration #1 chosen from 1 choice [ 1.132099] hub 3-0:1.0: USB hub found [ 1.132106] hub 3-0:1.0: 6 ports detected [ 1.132586] ACPI: PCI Interrupt Link [UB11] enabled at IRQ 23 [ 1.132589] ohci_hcd 0000:00:04.0: PCI INT A -> Link[UB11] -> GSI 23 (level, low) -> IRQ 23 [ 1.132599] ohci_hcd 0000:00:04.0: setting latency timer to 64 [ 1.132601] ohci_hcd 0000:00:04.0: OHCI Host Controller [ 1.132631] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 4 [ 1.132652] ohci_hcd 0000:00:04.0: irq 23, io mem 0xfad7d000 [ 1.192075] usb usb4: configuration #1 chosen from 1 choice [ 1.192101] hub 4-0:1.0: USB hub found [ 1.192107] hub 4-0:1.0: 6 ports detected [ 1.192158] uhci_hcd: USB Universal Host Controller Interface driver [ 1.192242] PNP: No PS/2 controller found. Probing ports directly. [ 1.192710] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.192716] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.192803] mice: PS/2 mouse device common for all mice [ 1.192901] rtc_cmos 00:07: RTC can wake from S4 [ 1.192935] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 1.192989] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs [ 1.193100] device-mapper: uevent: version 1.0.3 [ 1.193186] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 1.193305] device-mapper: multipath: version 1.1.0 loaded [ 1.193308] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1.193557] cpuidle: using governor ladder [ 1.193559] cpuidle: using governor menu [ 1.193906] TCP cubic registered [ 1.194022] NET: Registered protocol family 10 [ 1.194464] lo: Disabled Privacy Extensions [ 1.194730] NET: Registered protocol family 17 [ 1.194769] powernow-k8: Found 1 AMD Phenom(tm) 9600 Quad-Core Processor processors (4 cpu cores) (version 2.20.00) [ 1.194799] powernow-k8: 0 : pstate 0 (2300 MHz) [ 1.194801] powernow-k8: 1 : pstate 1 (1150 MHz) [ 1.195181] PM: Resume from disk failed. [ 1.195193] registered taskstats version 1 [ 1.195700] Magic number: 10:828:226 [ 1.195821] rtc_cmos 00:07: setting system clock to 2010-05-20 11:12:57 UTC (1274353977) [ 1.195824] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.195825] EDD information not available. [ 1.195882] Freeing unused kernel memory: 876k freed [ 1.196157] Write protecting the kernel read-only data: 7680k [ 1.217688] udev: starting version 151 [ 1.259567] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 1.260084] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22 [ 1.260091] forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 22 (level, low) -> IRQ 22 [ 1.260097] forcedeth 0000:00:0a.0: setting latency timer to 64 [ 1.286650] Floppy drive(s): fd0 is 1.44M [ 1.307596] FDC 0 is a post-1991 82077 [ 1.390025] usb 2-1: new high speed USB device using ehci_hcd and address 2 [ 1.657986] usb 2-1: configuration #1 chosen from 1 choice [ 1.790777] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:26:18:45:ea:ec [ 1.790782] forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt gbit lnktim msi desc-v3 [ 1.790858] pata_amd 0000:00:06.0: version 0.4.1 [ 1.790898] pata_amd 0000:00:06.0: setting latency timer to 64 [ 1.790974] scsi0 : pata_amd [ 1.791111] scsi1 : pata_amd [ 1.792279] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 1.792282] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 1.792358] ahci 0000:00:09.0: version 3.0 [ 1.792367] ahci 0000:00:09.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23 [ 1.792454] alloc irq_desc for 27 on node 0 [ 1.792457] alloc kstat_irqs on node 0 [ 1.792469] ahci 0000:00:09.0: irq 27 for MSI/MSI-X [ 1.792541] ahci 0000:00:09.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl IDE mode [ 1.792545] ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pmp pio boh [ 1.792549] ahci 0000:00:09.0: setting latency timer to 64 [ 1.792981] scsi2 : ahci [ 1.793075] scsi3 : ahci [ 1.793133] scsi4 : ahci [ 1.793189] scsi5 : ahci [ 1.793246] scsi6 : ahci [ 1.793298] scsi7 : ahci [ 1.793468] ata3: SATA max UDMA/133 abar m8192@0xfad76000 port 0xfad76100 irq 27 [ 1.793470] ata4: SATA max UDMA/133 abar m8192@0xfad76000 port 0xfad76180 irq 27 [ 1.793473] ata5: SATA max UDMA/133 abar m8192@0xfad76000 port 0xfad76200 irq 27 [ 1.793475] ata6: SATA max UDMA/133 abar m8192@0xfad76000 port 0xfad76280 irq 27 [ 1.793478] ata7: SATA max UDMA/133 abar m8192@0xfad76000 port 0xfad76300 irq 27 [ 1.793480] ata8: SATA max UDMA/133 abar m8192@0xfad76000 port 0xfad76380 irq 27 [ 1.830029] usb 3-1: new low speed USB device using ohci_hcd and address 2 [ 1.963661] ata2: port disabled. ignoring. [ 2.058098] usb 3-1: configuration #1 chosen from 1 choice [ 2.070540] usbcore: registered new interface driver hiddev [ 2.070668] usbcore: registered new interface driver usbhid [ 2.070670] usbhid: v2.6:USB HID core driver [ 2.140030] ata6: SATA link down (SStatus 0 SControl 300) [ 2.140047] ata4: SATA link down (SStatus 0 SControl 300) [ 2.140068] ata7: SATA link down (SStatus 0 SControl 300) [ 2.140076] ata8: SATA link down (SStatus 0 SControl 300) [ 2.320018] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.320030] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.320888] ata5.00: ATAPI: TSSTcorp CDDVDW SH-S223F, SB03, max UDMA/100, ATAPI AN [ 2.321827] ata5.00: configured for UDMA/100 [ 2.346983] ata3.00: ATA-8: ST3750528AS, CC34, max UDMA/133 [ 2.346985] ata3.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 2.386486] ata3.00: configured for UDMA/133 [ 2.386598] scsi 2:0:0:0: Direct-Access ATA ST3750528AS CC34 PQ: 0 ANSI: 5 [ 2.386783] sd 2:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB) [ 2.386803] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 2.386820] sd 2:0:0:0: [sda] Write Protect is off [ 2.386823] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.386841] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.386981] sda: [ 2.387421] scsi 4:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S223F SB03 PQ: 0 ANSI: 5 [ 2.390541] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.390545] Uniform CD-ROM driver Revision: 3.20 [ 2.390656] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 2.390727] sr 4:0:0:0: Attached scsi generic sg1 type 5 [ 2.403644] sda1 sda2 [ 2.403916] sd 2:0:0:0: [sda] Attached SCSI disk [ 2.414208] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb3/3-1/3-1:1.0/input/input3 [ 2.414305] logitech 0003:046D:C517.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:02.0-1/input0 [ 2.423976] logitech 0003:046D:C517.0002: fixing up Logitech keyboard report descriptor [ 2.424605] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb3/3-1/3-1:1.1/input/input4 [ 2.424743] logitech 0003:046D:C517.0002: input,hiddev96,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:02.0-1/input1 [ 3.035354] EXT4-fs (loop0): mounted filesystem with ordered data mode [ 9.860615] udev: starting version 151 [ 9.879323] lp: driver loaded but no devices found [ 9.927414] i2c i2c-0: nForce2 SMBus adapter at 0x2d00 [ 9.927422] ACPI: resource nForce2_smbus [0x2e00-0x2e3f] conflicts with ACPI region SM00 [0x2e00-0x2e3f] [ 9.927424] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 9.927426] nForce2_smbus 0000:00:01.1: Error probing SMB2. [ 10.006862] EDAC MC: Ver: 2.1.0 Apr 28 2010 [ 10.014439] [Firmware Bug]: ACPI(IGPU) defines _DOD but not _DOS [ 10.014793] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:18/LNXVIDEO:00/input/input5 [ 10.014913] ACPI: Video Device [IGPU] (multi-head: yes rom: no post: no) [ 10.016746] EDAC amd64_edac: Ver: 3.2.0 Apr 28 2010 [ 10.040421] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3). [ 10.040442] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 10.040443] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 10.040444] (Note that use of the override may cause unknown side effects.) [ 10.040501] amd64_edac: probe of 0000:00:18.2 failed with error -22 [ 10.078785] type=1505 audit(1274368386.376:2): operation="profile_load" pid=604 name="/sbin/dhclient3" [ 10.079032] type=1505 audit(1274368386.376:3): operation="profile_load" pid=604 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 10.079169] type=1505 audit(1274368386.376:4): operation="profile_load" pid=604 name="/usr/lib/connman/scripts/dhclient-script" [ 10.097468] cfg80211: Calling CRDA to update world regulatory domain [ 10.105431] Linux video capture interface: v2.00 [ 10.108342] uvcvideo: Found UVC 1.00 device (046d:09a1) [ 10.116565] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 10.124751] input: UVC Camera (046d:09a1) as /devices/pci0000:00/0000:00:04.1/usb2/2-1/2-1:1.0/input/input6 [ 10.124825] usbcore: registered new interface driver uvcvideo [ 10.124828] USB Video Class driver (v0.1.0) [ 10.145828] cfg80211: World regulatory domain updated: [ 10.145831] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 10.145833] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 10.145836] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 10.145837] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 10.145839] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 10.145841] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 10.171100] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 16 [ 10.171112] alloc irq_desc for 16 on node 0 [ 10.171115] alloc kstat_irqs on node 0 [ 10.171130] ath5k 0000:01:05.0: PCI INT A -> Link[LNKA] -> GSI 16 (level, low) -> IRQ 16 [ 10.171261] ath5k 0000:01:05.0: registered as 'phy0' [ 10.179050] vga16fb: initializing [ 10.179055] vga16fb: mapped to 0xffff8800000a0000 [ 10.179864] fb0: VGA16 VGA frame buffer device [ 10.204343] nvidia: module license 'NVIDIA' taints kernel. [ 10.204349] Disabling lock debugging due to kernel taint [ 10.515981] usbcore: registered new interface driver snd-usb-audio [ 10.523185] Console: switching to colour frame buffer device 80x30 [ 10.704321] HDA Intel 0000:00:07.0: power state changed by ACPI to D0 [ 10.704707] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21 [ 10.704712] HDA Intel 0000:00:07.0: PCI INT A -> Link[LAZA] -> GSI 21 (level, low) -> IRQ 21 [ 10.704715] hda_intel: Disable MSI for Nvidia chipset [ 10.704747] HDA Intel 0000:00:07.0: setting latency timer to 64 [ 10.705171] ACPI: PCI Interrupt Link [SGRU] enabled at IRQ 20 [ 10.705175] nvidia 0000:02:00.0: PCI INT A -> Link[SGRU] -> GSI 20 (level, low) -> IRQ 20 [ 10.705178] nvidia 0000:02:00.0: setting latency timer to 64 [ 10.705388] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 173.14.22 Wed Nov 11 05:08:25 PST 2009 [ 10.761791] ath: EEPROM regdomain: 0x10 [ 10.761794] ath: EEPROM indicates we should expect a direct regpair map [ 10.761797] ath: Country alpha2 being used: CO [ 10.761798] ath: Regpair used: 0x10 [ 10.771400] phy0: Selected rate control algorithm 'minstrel' [ 10.772013] ath5k phy0: Atheros AR2413 chip found (MAC: 0x78, PHY: 0x45) [ 10.772033] cfg80211: Calling CRDA for country: CO [ 10.780420] cfg80211: Regulatory domain changed to country: CO [ 10.780424] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 10.780427] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 10.780430] (5170000 KHz - 5250000 KHz @ 20000 KHz), (300 mBi, 1700 mBm) [ 10.780432] (5250000 KHz - 5330000 KHz @ 20000 KHz), (300 mBi, 2300 mBm) [ 10.780434] (5735000 KHz - 5835000 KHz @ 20000 KHz), (300 mBi, 3000 mBm) [ 12.870919] Adding 261112k swap on /host/ubuntu/disks/swap.disk. Priority:-1 extents:1 across:261112k [ 13.044437] type=1505 audit(1274368389.346:5): operation="profile_load" pid=901 name="/usr/share/gdm/guest-session/Xsession" [ 13.048170] type=1505 audit(1274368389.346:6): operation="profile_replace" pid=902 name="/sbin/dhclient3" [ 13.048511] type=1505 audit(1274368389.346:7): operation="profile_replace" pid=902 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 13.048653] type=1505 audit(1274368389.346:8): operation="profile_replace" pid=902 name="/usr/lib/connman/scripts/dhclient-script" [ 13.054303] type=1505 audit(1274368389.356:9): operation="profile_load" pid=903 name="/usr/bin/evince" [ 13.057313] type=1505 audit(1274368389.356:10): operation="profile_load" pid=903 name="/usr/bin/evince-previewer" [ 13.059377] type=1505 audit(1274368389.356:11): operation="profile_load" pid=903 name="/usr/bin/evince-thumbnailer" [ 13.125839] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 13.153396] alloc irq_desc for 28 on node 0 [ 13.153400] alloc kstat_irqs on node 0 [ 13.153411] forcedeth 0000:00:0a.0: irq 28 for MSI/MSI-X [ 13.153610] eth0: no link during initialization. [ 13.154533] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 13.279924] ppdev: user-space parallel port driver [ 25.252812] wlan0: deauthenticating from 00:23:69:c0:46:17 by local choice (reason=3) [ 25.253318] wlan0: direct probe to AP 00:23:69:c0:46:17 (try 1) [ 25.255872] wlan0: direct probe responded [ 25.255877] wlan0: authenticate with AP 00:23:69:c0:46:17 (try 1) [ 25.257656] wlan0: authenticated [ 25.257681] wlan0: associate with AP 00:23:69:c0:46:17 (try 1) [ 25.260081] wlan0: RX AssocResp from 00:23:69:c0:46:17 (capab=0x431 status=0 aid=1) [ 25.260083] wlan0: associated [ 25.261030] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 25.621741] hda-intel: spurious response 0x0:0x0, last cmd=0x1370600 [ 25.621777] hda-intel: spurious response 0x0:0x0, last cmd=0x1370600 [ 26.265485] Intel AES-NI instructions are not detected. [ 26.323832] padlock: VIA PadLock not detected. [ 36.032515] wlan0: no IPv6 routers present [ 36.373152] end_request: I/O error, dev fd0, sector 0 [ 48.458787] end_request: I/O error, dev fd0, sector 0 [ 578.320049] usb 1-6: new high speed USB device using ehci_hcd and address 3 [ 578.473381] usb 1-6: configuration #1 chosen from 2 choices [ 578.512933] Initializing USB Mass Storage driver... [ 578.513174] scsi8 : SCSI emulation for USB Mass Storage devices [ 578.513481] usb-storage: device found at 3 [ 578.513487] usb-storage: waiting for device to settle before scanning [ 578.513503] usbcore: registered new interface driver usb-storage [ 578.513509] USB Mass Storage support registered. [ 583.510414] usb-storage: device scan complete [ 583.512633] scsi 8:0:0:0: Direct-Access Apple iPod 1.62 PQ: 0 ANSI: 0 [ 583.513389] sd 8:0:0:0: Attached scsi generic sg2 type 0 [ 583.516999] sd 8:0:0:0: [sdb] 58605120 512-byte logical blocks: (30.0 GB/27.9 GiB) [ 583.520493] sd 8:0:0:0: [sdb] Write Protect is off [ 583.520501] sd 8:0:0:0: [sdb] Mode Sense: 68 00 00 08 [ 583.520505] sd 8:0:0:0: [sdb] Assuming drive cache: write through [ 583.524478] sd 8:0:0:0: [sdb] Assuming drive cache: write through [ 583.524485] sdb: sdb1 sdb2 [ 583.546502] sd 8:0:0:0: [sdb] Assuming drive cache: write through [ 583.546511] sd 8:0:0:0: [sdb] Attached SCSI removable disk [ 584.300206] FAT: invalid media value (0x2f) [ 584.300215] VFS: Can't find a valid FAT filesystem on dev sdb1. [ 584.929614] FAT: invalid media value (0x2f) [ 584.929623] VFS: Can't find a valid FAT filesystem on dev sdb1. [ 814.210038] usb 1-6: USB disconnect, address 3