[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.337-tegra (buildbrain@mobile-u64-5434-d8000) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Thu Jun 8 21:19:14 PDT 2023 [ 0.000000] Boot CPU: AArch64 Processor [411fd071] [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 32, [ 0.000000] OF: fdt: - 80000000 , 7ee00000 [ 0.000000] OF: fdt: - 100000000 , 7f200000 [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000070006000 (options '') [ 0.000000] bootconsole [uart8250] enabled [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout [ 0.000000] OF: reserved mem: initialized node iram-carveout, compatible id nvidia,iram-carveout [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops [ 0.000000] cma: Reserved 64 MiB at 0x00000000fac00000 [ 0.000000] On node 0 totalpages: 1039872 [ 0.000000] DMA zone: 8192 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 519168 pages, LIFO batch:31 [ 0.000000] Normal zone: 8136 pages used for memmap [ 0.000000] Normal zone: 520704 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 24 pages/cpu s57816 r8192 d32296 u98304 [ 0.000000] pcpu-alloc: s57816 r8192 d32296 u98304 alloc=24*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] CPU features: enabling workaround for ARM erratum 832075 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] CPU features: enabling workaround for Spectre-BHB [ 0.000000] CPU features: enabling workaround for ARM erratum 1742098 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1023544 [ 0.000000] Kernel command line: tegraid=21.1.2.0.0 ddr_die=4096M@2048M section=512M memtype=0 vpr_resize usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@63 video=tegrafb no_console_suspend=1 console=ttyS0,115200n8 debug_uartport=lsport,4 earlyprintk=uart8250-32bit,0x70006000 maxcpus=4 usbcore.old_scheme_first=1 lp0_vec=0x1000@0xff780000 core_edp_mv=1075 core_edp_ma=4000 gpt earlycon=uart8250,mmio32,0x70006000 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 quiet root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 98304 bytes [ 0.000000] log_buf_len min size: 32768 bytes [ 0.000000] log_buf_len: 131072 bytes [ 0.000000] early log buf free: 29724(90%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Memory: 3568308K/4159488K available (15486K kernel code, 2982K rwdata, 6716K rodata, 8640K init, 614K bss, 116044K reserved, 475136K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0x (ptrval) - 0x (ptrval) ( 15488 KB) [ 0.000000] .rodata : 0x (ptrval) - 0x (ptrval) ( 6784 KB) [ 0.000000] .init : 0x (ptrval) - 0x (ptrval) ( 8640 KB) [ 0.000000] .data : 0x (ptrval) - 0x (ptrval) ( 2983 KB) [ 0.000000] .bss : 0x (ptrval) - 0x (ptrval) ( 615 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf03fc8000 ( 63 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc0ff200000 ( 4082 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] /interrupt-controller@60004000: 192 interrupts forwarded to /interrupt-controller [ 0.000000] t210 clock and reset probe [ 0.000000] tegra-pmc: get_secure_pmc_setting: done secure_pmc=1 [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] clk_cbus_recalc_rate: no gbus parent [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 19.20MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000006] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.001561] Console: colour dummy device 80x25 [ 0.001571] console [tty0] enabled [ 0.001576] bootconsole [uart8250] disabled [ 0.001595] kmemleak: Kernel memory leak detector disabled [ 0.001614] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800) [ 0.001626] pid_max: default: 32768 minimum: 301 [ 0.002106] Security Framework initialized [ 0.002347] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.002353] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.003474] ftrace: allocating 47296 entries in 185 pages [ 0.179993] sched-energy: CPU device node has no sched-energy-costs [ 0.188260] ASID allocator initialised with 65536 entries [ 0.215659] tegra-id: chipid=22117. [ 0.215673] tegra-id: opt_subrevision=0. [ 0.215690] Tegra Speedo/IDDQ fuse revision 4 [ 0.215695] Tegra: CPU Speedo ID 9, SoC Speedo ID 0, GPU Speedo ID 2 [ 0.215700] Tegra: CPU Process ID 0, SoC Process ID 1, GPU Process ID 0 [ 0.215706] Tegra: CPU Speedo Value 2036, SoC Speedo Value 1965, GPU Speedo Value 2038 [ 0.215709] Tegra: CPU IDDQ Value 1728, SoC IDDQ Value 2008, GPU IDDQ Value 2340 [ 0.215737] Tegra Revision: A02 SKU: 0x8f CPU Process: 0 SoC Process: 1 [ 0.215752] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t210/porg/kernel-dts/tegra210-p3448-0000-p3449-0000-a02.dts [ 0.215759] DTB Build time: Jun 8 2023 21:21:40 [ 0.265078] CPU1: Booted secondary processor [411fd071] [ 0.296959] CPU2: Booted secondary processor [411fd071] [ 0.328949] CPU3: Booted secondary processor [411fd071] [ 0.329041] Brought up 4 CPUs [ 0.329048] SMP: Total of 4 processors activated. [ 0.329056] CPU features: detected feature: 32-bit EL0 Support [ 0.329293] CPU: All CPU(s) started at EL2 [ 0.329310] alternatives: patching kernel code [ 0.337466] devtmpfs: initialized [ 0.374181] Initilizing CustomIPI irq domain [ 0.374490] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.374511] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.386520] pinctrl core: initialized pinctrl subsystem [ 0.387088] OS set in device tree is not L4T. [ 0.387572] regulator-dummy: no parameters [ 0.387861] Initializing plugin-manager [ 0.388015] Plugin module not found [ 0.388204] node /plugin-manager/fragement@0 match with board >=3448-0000-100 [ 0.388707] node /plugin-manager/fragment@1 match with board >=3448-0000-101 [ 0.389456] node /plugin-manager/fragment@5 match with board 3449-0000-200 [ 0.390004] node /plugin-manager/fragement@7 match with odm-data enable-pmic-wdt [ 0.390207] node /plugin-manager/fragement@8 match with odm-data enable-pmic-wdt [ 0.390476] node /plugin-manager/fragement@9 match with board <3448-0000-300 [ 0.394018] NET: Registered protocol family 16 [ 0.395475] pstore: using zlib compression [ 0.395509] console [pstore-1] enabled [ 0.395514] pstore: Registered ramoops as persistent store backend [ 0.395519] ramoops: attached 0x200000@0xb0000000, ecc: 0/0 [ 0.405110] cpuidle: using governor menu [ 0.408838] tegra_smmu 70019000.iommu: Loaded Tegra IOMMU driver [ 0.410381] vdso: 2 pages (1 code @ (ptrval), 1 data @ (ptrval)) [ 0.410401] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.413424] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations [ 0.415623] Serial: AMBA PL011 UART driver [ 0.416139] tegra_powergate_init: DONE [ 0.416154] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t210/porg/kernel-dts/tegra210-p3448-0000-p3449-0000-a02.dts [ 0.416161] DTB Build time: Jun 8 2023 21:21:40 [ 0.417929] Tegra reboot handler registered. [ 0.422333] iommu: Adding device tegra-carveouts to group 0 [ 0.422470] platform tegra-carveouts: domain= (ptrval) allocates as[0]= (ptrval) [ 0.422816] iommu: Adding device smmu_test to group 1 [ 0.422860] platform smmu_test: domain= (ptrval) allocates as[0]= (ptrval) [ 0.423660] mc: mapped MMIO address: 0x (ptrval) -> 0x70019000 [ 0.423721] mc: mapped MMIO address: 0x (ptrval) -> 0x7001c000 [ 0.423773] mc: mapped MMIO address: 0x (ptrval) -> 0x7001d000 [ 0.423782] nv-tegra-mc 70019000.mc: No mssnvlink node [ 0.423799] mc-err: mcerr ops are set to t21x [ 0.434571] iommu: Adding device 70090000.xusb to group 2 [ 0.434850] iommu: Adding device 70006000.serial to group 3 [ 0.434905] platform 70006000.serial: domain= (ptrval) allocates as[0]= (ptrval) [ 0.435319] iommu: Adding device 70006040.serial to group 4 [ 0.435594] iommu: Adding device 70006200.serial to group 5 [ 0.435784] iommu: Adding device sound to group 6 [ 0.435831] platform sound: domain= (ptrval) allocates as[0]= (ptrval) [ 0.436370] iommu: Adding device 7000d400.spi to group 7 [ 0.436658] iommu: Adding device 7000d600.spi to group 8 [ 0.436929] iommu: Adding device 70410000.spi to group 9 [ 0.437288] iommu: Adding device 50000000.host1x to group 10 [ 0.437568] iommu: Adding device 54080000.vi to group 11 [ 0.437954] iommu: Adding device 54600000.isp to group 12 [ 0.438219] iommu: Adding device 54680000.isp to group 13 [ 0.438506] iommu: Adding device tegradc.0 to group 14 [ 0.438559] platform tegradc.0: domain= (ptrval) allocates as[0]= (ptrval) [ 0.439077] platform tegradc.0: IOVA linear map 0x00000000d7000000(19000000) [ 0.439401] iommu: Adding device tegradc.1 to group 15 [ 0.439469] platform tegradc.1: domain= (ptrval) allocates as[0]= (ptrval) [ 0.439980] platform tegradc.1: IOVA linear map 0x00000000d7000000(19000000) [ 0.440240] iommu: Adding device 54340000.vic to group 16 [ 0.440444] iommu: Adding device 544c0000.nvenc to group 17 [ 0.440653] iommu: Adding device 54500000.tsec to group 18 [ 0.440841] iommu: Adding device 54100000.tsecb to group 19 [ 0.441060] iommu: Adding device 54480000.nvdec to group 20 [ 0.441255] iommu: Adding device 54380000.nvjpg to group 21 [ 0.442294] iommu: Adding device 546c0000.i2c to group 22 [ 0.442620] iommu: Adding device 57000000.gpu to group 23 [ 0.442697] platform 57000000.gpu: domain= (ptrval) allocates as[0]= (ptrval) [ 0.442734] platform 57000000.gpu: domain= (ptrval) allocates as[1]= (ptrval) [ 0.442770] platform 57000000.gpu: domain= (ptrval) allocates as[2]= (ptrval) [ 0.442804] platform 57000000.gpu: domain= (ptrval) allocates as[3]= (ptrval) [ 0.443662] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.443673] tegra-pmc 7000e400.pmc: scratch reg offset dts data not present [ 0.443684] tegra-pmc: ### PMC reset source: TEGRA_SOFTWARE_RESET [ 0.443688] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_WARM [ 0.443692] tegra-pmc: ### PMC reset status reg: 0x3 [ 0.493153] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered [ 0.493159] tegra-pmc: Clear bootloader IO dpd settings [ 0.493183] tegra-pmc 7000e400.pmc: IO padctrl driver initialized [ 0.493246] tegra-pmc 7000e400.pmc: PMC: Successfully configure bootrom reset commands [ 0.493559] iommu: Adding device 70012000.se to group 24 [ 0.494137] iommu: Adding device 1003000.pcie to group 25 [ 0.494197] platform 1003000.pcie: domain= (ptrval) allocates as[0]= (ptrval) [ 0.494628] iommu: Adding device 7000c000.i2c to group 26 [ 0.494896] iommu: Adding device 7000c400.i2c to group 27 [ 0.495144] iommu: Adding device 7000c500.i2c to group 28 [ 0.495396] iommu: Adding device 7000c700.i2c to group 29 [ 0.495687] iommu: Adding device 7000d000.i2c to group 30 [ 0.495943] iommu: Adding device 7000d100.i2c to group 31 [ 0.496233] iommu: Adding device sdhci-tegra.0 to group 32 [ 0.496284] platform sdhci-tegra.0: domain= (ptrval) allocates as[0]= (ptrval) [ 0.497135] iommu: Adding device 700d0000.xudc to group 33 [ 0.500369] vdd-ac-bat: 5000 mV [ 0.500717] vdd-5v0-sys: 5000 mV [ 0.501455] vdd-5v0-hdmi: 5000 mV [ 0.501883] vdd-5v0-hdmi: supplied by vdd-5v0-sys [ 0.502125] vdd-1v8-sys: 1800 mV [ 0.502508] vdd-fan: 5000 mV [ 0.502728] vdd-fan: supplied by vdd-5v0-sys [ 0.502978] vdd-usb-vbus: 5000 mV [ 0.503196] vdd-usb-vbus: supplied by vdd-5v0-sys [ 0.503526] vdd-usb-vbus2: 5000 mV [ 0.534196] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.536439] gpio gpiochip0: gpio-line-names specifies 240 line names but there are 256 lines on the chip [ 0.537566] GPIO line 151 (camera-control-output-low) hogged as output/low [ 0.537916] gpiochip_setup_dev: registered GPIOs 0 to 255 on device: gpiochip0 (tegra-gpio) [ 0.545630] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.545963] SCSI subsystem initialized [ 0.546150] libata version 3.00 loaded. [ 0.546386] usbcore: registered new interface driver usbfs [ 0.546440] usbcore: registered new interface driver hub [ 0.546480] usbcore: registered new device driver usb [ 0.550656] max77620 4-003c: PMIC Version OTP:0x35 and ES:0x8 [ 0.557210] vdd-core: 600 <--> 1162 mV at 1075 mV [ 0.558208] vdd-ddr-1v1: Bringing 1125000uV into 1150000-1150000uV [ 0.561097] vdd-ddr-1v1: 1150 mV [ 0.565100] vdd-pre-reg-1v35: 1350 mV [ 0.569093] vdd-1v8: 1800 mV [ 0.573094] avdd-sys-1v2: 1200 mV [ 0.577095] vdd-pex-1v0: 1050 mV [ 0.577736] vddio-sdmmc-ap: 1800 <--> 3300 mV at 3300 mV [ 0.578265] max77620-ldo3: at 3100 mV [ 0.581097] vdd-rtc: 850 <--> 1100 mV at 1000 mV [ 0.581628] max77620-ldo5: at 3100 mV [ 0.582148] max77620-ldo6: at 2800 mV [ 0.585095] avdd-1v05-pll: 1050 mV [ 0.589093] avdd-io-hdmi-dp: 1050 mV [ 0.591572] GPIO line 505 (spmic-default-output-high) hogged as output/high [ 0.591888] gpiochip_setup_dev: registered GPIOs 504 to 511 on device: gpiochip1 (max77620-gpio) [ 0.592181] max77620 4-003c: max77620 probe successful [ 0.594984] media: Linux media interface: v0.10 [ 0.595040] Linux video capture interface: v2.00 [ 0.595923] pps_core: LinuxPPS API ver. 1 registered [ 0.595927] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.595953] PTP clock support registered [ 0.599165] tegra210-emc 7001b000.external-memory-controller: validated EMC DFS table [ 0.600007] Advanced Linux Sound Architecture Driver Initialized. [ 0.600632] Bluetooth: Core ver 2.22 [ 0.600678] NET: Registered protocol family 31 [ 0.600682] Bluetooth: HCI device and connection manager initialized [ 0.600695] Bluetooth: HCI socket layer initialized [ 0.600704] Bluetooth: L2CAP socket layer initialized [ 0.600731] Bluetooth: SCO socket layer initialized [ 0.602619] tegra210_dvfs: no clock found for sdmmc2_ddr [ 0.602638] tegra210_dvfs: no clock found for sdmmc4_ddr [ 0.602695] tegra210_dvfs: no clock found for sdmmc1_ddr [ 0.602712] tegra210_dvfs: no clock found for sdmmc3_ddr [ 0.606019] tegra_dvfs: Unable to get vdd-cpu rail for step info, defering probe [ 0.607263] vdd-3v3-sys: 3300 mV [ 0.607625] vdd-3v3-sys: supplied by vdd-5v0-sys [ 0.607701] vdd-1v8-sys: supplied by vdd-3v3-sys [ 0.608325] vdd-usb-vbus2: supplied by vdd-3v3-sys [ 0.608746] vdd-3v3-sd: 3300 mV [ 0.609133] vdd-3v3-sd: supplied by vdd-3v3-sys [ 0.609694] avdd-io-edp-1v05: 1050 mV [ 0.610078] avdd-io-edp-1v05: supplied by avdd-1v05-pll [ 0.610266] vdd-usb-hub-en: 5000 mV [ 0.610609] vdd-usb-hub-en: supplied by vdd-1v8-sys [ 0.611669] camchar: rtcpu character device driver loaded [ 0.612363] extcon-gpio-states extcon:extcon@1: Cable state:0, cable id:0 [ 0.613728] clocksource: Switched to clocksource arch_sys_counter [ 0.654452] VFS: Disk quotas dquot_6.6.0 [ 0.654585] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.655068] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 0.655477] dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000d7000000, size=0x19000000 [ 0.655495] dma-vpr: heap size is not multiple of cma_chunk_size heap_info->num_chunks (13) rem_chunk_size(0x1000000) [ 0.655779] cma: enabled page replacement for spfn=d7000, epfn=f0000 [ 0.655788] dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful [ 0.655807] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 0.655849] tegra-carveouts tegra-carveouts: iram :dma coherent mem declare 0x0000000040001000,258048 [ 0.655855] tegra-carveouts tegra-carveouts: assigned reserved memory node iram-carveout [ 0.655881] nvmap: nvmap_select_cache_ops() nvmap cache ops set to set/ways [ 0.655892] nvmap_page_pool_init: Total RAM pages: 1010861 [ 0.655896] nvmap_page_pool_init: nvmap page pool size: 126357 pages (493 MB) [ 0.656131] nvmap_background_zero_thread: PP zeroing thread starting. [ 0.656474] misc nvmap: created heap iram base 0x (ptrval) size (252KiB) [ 0.657230] misc nvmap: created heap vpr base 0x (ptrval) size (409600KiB) [ 0.665435] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type AO-therm [ 0.665945] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type CPU-therm [ 0.666307] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm [ 0.666571] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm [ 0.666742] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die [ 0.667004] pre_t19x_iso_plat_init(): iso emc max clk=1600000KHz [ 0.667008] pre_t19x_iso_plat_init(): max_iso_bw=11520000KB [ 0.667465] NET: Registered protocol family 2 [ 0.667627] IP idents hash table entries: 65536 (order: 7, 524288 bytes) [ 0.694017] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.694231] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.694734] TCP: Hash tables configured (established 32768 bind 32768) [ 0.694883] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.694965] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.695393] NET: Registered protocol family 1 [ 0.696045] RPC: Registered named UNIX socket transport module. [ 0.696049] RPC: Registered udp transport module. [ 0.696052] RPC: Registered tcp transport module. [ 0.696056] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.696068] PCI: CLS 0 bytes, default 64 [ 0.696323] Trying to unpack rootfs image as initramfs... [ 1.004126] Freeing initrd memory: 6988K [ 1.013840] host1x 50000000.host1x: initialized [ 1.015640] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.018883] audit: initializing netlink subsys (disabled) [ 1.018949] audit: type=2000 audit(0.863:1): initialized [ 1.019657] workingset: timestamp_bits=46 max_order=20 bucket_order=0 [ 1.029425] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.030965] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.031772] 9p: Installing v9fs 9p2000 file system support [ 1.035038] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.035147] io scheduler noop registered [ 1.035449] io scheduler cfq registered (default) [ 1.038252] gic 702f9000.agic: GIC IRQ controller registered [ 1.041211] iommu: Adding device 702ef000.adsp to group 34 [ 1.050631] iommu: Adding device aconnect@702c0000:adsp_audio to group 35 [ 1.050782] tegra-aconnect aconnect@702c0000: Tegra ACONNECT bus registered [ 1.051403] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_SKU_CALIB_0 = 0xa22ac14 [ 1.051411] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_USB_CALIB_EXT_0 = 0x4 [ 1.052997] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.0, lane = usb2-0, function = xusb [ 1.053097] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.1, lane = usb2-1, function = xusb [ 1.053207] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.2, lane = usb2-2, function = xusb [ 1.053406] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.3, lane = pcie-0, function = pcie-x1 [ 1.053505] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.4, lane = pcie-1, function = pcie-x4 [ 1.053599] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.5, lane = pcie-2, function = pcie-x4 [ 1.053686] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.6, lane = pcie-3, function = pcie-x4 [ 1.053824] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.7, lane = pcie-4, function = pcie-x4 [ 1.053917] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.8, lane = pcie-5, function = xusb [ 1.054010] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.9, lane = pcie-6, function = xusb [ 1.060021] tegra-pwm 7000a000.pwm: PWM clk cannot sleep in ops [ 1.061622] tegra-dfll-pwm 70110000.pwm: DFLL pwm-rate: 12800000 [ 1.063538] tegra-pcie 1003000.pcie: 4x1, 1x1 configuration [ 1.064820] tegra-pcie 1003000.pcie: PCIE: Enable power rails [ 1.065174] tegra-pcie 1003000.pcie: probing port 0, using 4 lanes [ 1.066491] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe [ 1.066713] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=750000, max_bw=1500000 [ 1.066908] Adding domain tsec-pd to PM domain host1x-pd [ 1.068863] tegra-pcie 1003000.pcie: probing port 1, using 1 lanes [ 1.069782] tsec 54500000.tsec: initialized [ 1.071348] tsec 54100000.tsecb: initialized [ 1.072028] Adding domain nvdec-pd to PM domain host1x-pd [ 1.075171] nvdec 54480000.nvdec: initialized [ 1.076161] Adding domain vic03-pd to PM domain host1x-pd [ 1.076333] Adding domain msenc-pd to PM domain host1x-pd [ 1.076491] Adding domain nvjpg-pd to PM domain host1x-pd [ 1.080363] falcon 54340000.vic: initialized [ 1.081603] falcon 544c0000.nvenc: initialized [ 1.082958] falcon 54380000.nvjpg: initialized [ 1.087018] tegra_cec 70015000.tegra_cec: dt=1 start=0x70015000 end=0x70015FFF irq=97 [ 1.087073] tegra_cec 70015000.tegra_cec: Enable clock result: 0. [ 1.087102] tegra_cec 70015000.tegra_cec: tegra_cec_init started [ 1.087377] tegra_cec 70015000.tegra_cec: cec_add_sysfs ret=0 [ 1.087383] tegra_cec 70015000.tegra_cec: probed [ 1.087403] tegradc tegradc.0: disp0 connected to head0->/host1x/sor1 [ 1.087501] display board info: id 0x0, fab 0x0 [ 1.087563] generic_infoframe_type: 0x87 [ 1.087701] tegradc tegradc.0: DT parsed successfully [ 1.087745] tegradc tegradc.0: Display dc. (ptrval) registered with id=0 [ 1.095330] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 1.098256] tegradc tegradc.0: probed [ 1.099034] Console: switching to colour frame buffer device 80x30 [ 1.099071] tegradc tegradc.0: fb registered [ 1.100490] tegradc tegradc.1: disp1 connected to head1->/host1x/sor [ 1.100570] tegradc tegradc.1: No lt-data, using default setting [ 1.100603] tegradc tegradc.1: No hpd-gpio in DT [ 1.100640] tegradc tegradc.1: DT parsed successfully [ 1.100699] tegradc tegradc.1: Display dc. (ptrval) registered with id=1 [ 1.100955] tegra-adma 702e2000.adma: Tegra210 ADMA driver registered 22 channels [ 1.102107] tegra-fuse-burn 7000f800.efuse:efuse-burn: shutdown limit check disabled [ 1.102114] tegra-fuse-burn 7000f800.efuse:efuse-burn: Fuse burn driver initialized [ 1.102286] tegradc tegradc.1: dpd enable lookup fail:-19 [ 1.102620] kfuse 7000fc00.kfuse: initialized [ 1.103376] tegra-pmc-iopower pmc-iopower: Regulator supply iopower-dbg-supply not available [ 1.104220] tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0 [ 1.105117] tegra-dfll-pwm 70110000.pwm: DFLL_PWM regulator is available now [ 1.105130] vdd-cpu: 708 <--> 1322 mV at 708 mV [ 1.105504] pwm-regulator pwm_regulators:pwm-regulator@0: PWM regulator registration passed [ 1.608053] Host read timeout at address 545c00c4 [ 1.609157] vdd-gpu: applied init 1000000uV constraint [ 1.609167] vdd-gpu: 708 <--> 1323 mV at 997 mV [ 1.609416] tegradc tegradc.1: probed [ 1.609548] pwm-regulator pwm_regulators:pwm-regulator@1: PWM regulator registration passed [ 1.609913] tegradc tegradc.1: fb registered [ 1.611763] tegra-pcie 1003000.pcie: PCI host bridge to bus 0000:00 [ 1.611778] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 1.611784] pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff] [ 1.611790] pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref] [ 1.611798] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.611835] pci 0000:00:01.0: [10de:0fae] type 01 class 0x060400 [ 1.611955] pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.612185] iommu: Adding device 0000:00:01.0 to group 36 [ 1.612305] pci 0000:00:02.0: [10de:0faf] type 01 class 0x060400 [ 1.612389] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.612560] iommu: Adding device 0000:00:02.0 to group 37 [ 1.612638] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 1.612649] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 1.612814] pci 0000:01:00.0: [8086:24fd] type 00 class 0x028000 [ 1.612867] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit] [ 1.613125] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 1.613348] iommu: Adding device 0000:01:00.0 to group 38 [ 1.615629] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.615720] No Device Node present for smmu client: serial8250 !! [ 1.615728] platform serial8250: No iommus property found in DT node, got swgids from fixup(101004000) [ 1.615758] iommu: Adding device serial8250 to group 39 [ 1.618231] console [ttyS0] disabled [ 1.618343] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 63, base_baud = 25500000) is a Tegra [ 1.625873] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 1.626097] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 1.626132] pci 0000:02:00.0: reg 0x10: [io 0x0000-0x00ff] [ 1.626171] pci 0000:02:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit] [ 1.626196] pci 0000:02:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit] [ 1.626403] pci 0000:02:00.0: supports D1 D2 [ 1.626408] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.626677] iommu: Adding device 0000:02:00.0 to group 40 [ 1.629120] console [ttyS0] enabled [ 1.629862] tegradc tegradc.1: nominal-pclk:653100000 parent:653100000 div:1.0 pclk:653100000 646569000~711879000 [ 1.630378] 70006040.serial: ttyTHS1 at MMIO 0x70006040 (irq = 64, base_baud = 0) is a TEGRA_UART [ 1.630716] serial-tegra 70006200.serial: RX in PIO mode [ 1.630811] 70006200.serial: ttyTHS2 at MMIO 0x70006200 (irq = 65, base_baud = 0) is a TEGRA_UART [ 1.631815] [drm] Initialized [ 1.632443] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 1.636084] tegradc tegradc.1: DP: no prod_c_hbr2 prod settings node in device tree [ 1.637890] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02 [ 1.637987] pci 0000:00:01.0: BAR 14: assigned [mem 0x13000000-0x130fffff] [ 1.637996] pci 0000:00:02.0: BAR 14: assigned [mem 0x13100000-0x131fffff] [ 1.638002] pci 0000:00:02.0: BAR 13: assigned [io 0x1000-0x1fff] [ 1.638016] pci 0000:01:00.0: BAR 0: assigned [mem 0x13000000-0x13001fff 64bit] [ 1.638046] pci 0000:00:01.0: PCI bridge to [bus 01] [ 1.638056] pci 0000:00:01.0: bridge window [mem 0x13000000-0x130fffff] [ 1.638068] pci 0000:02:00.0: BAR 4: assigned [mem 0x13100000-0x13103fff 64bit] [ 1.638092] pci 0000:02:00.0: BAR 2: assigned [mem 0x13104000-0x13104fff 64bit] [ 1.638113] pci 0000:02:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 1.638123] pci 0000:00:02.0: PCI bridge to [bus 02] [ 1.638129] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff] [ 1.638135] pci 0000:00:02.0: bridge window [mem 0x13100000-0x131fffff] [ 1.638835] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 1.638841] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 1.638849] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 1.639029] aer 0000:00:01.0:pcie002: service driver aer loaded [ 1.639347] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt [ 1.639354] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt [ 1.639361] pcie_pme 0000:00:02.0:pcie001: service driver pcie_pme loaded [ 1.639511] aer 0000:00:02.0:pcie002: service driver aer loaded [ 1.640935] dp lt: state 0 (Reset), pending_lt_evt 1 [ 1.640941] dp lt: switching from state 0 (Reset) to state 0 (Reset) [ 1.640947] dp lt: state 0 (Reset), pending_lt_evt 0 [ 1.642203] tegradc tegradc.1: DP: no prod_c_hbr2 prod settings node in device tree [ 1.642349] dp lt: switching from state 0 (Reset) to state 2 (clock recovery) [ 1.642356] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 1.642603] dp lt: config: lane 0: vs level: 0, pe level: 0, pc2 level: 0 [ 1.642617] dp lt: config: lane 1: vs level: 0, pe level: 0, pc2 level: 0 [ 1.642630] dp lt: config: lane 2: vs level: 0, pe level: 0, pc2 level: 0 [ 1.642644] dp lt: config: lane 3: vs level: 0, pe level: 0, pc2 level: 0 [ 1.642652] dp lt: tx_pu: 0x20 [ 1.642915] brd: module loaded [ 1.644035] dp lt: CR not done [ 1.644728] dp lt: new config: lane 0: vs level: 1, pe level: 0, pc2 level: 0 [ 1.644733] dp lt: new config: lane 1: vs level: 1, pe level: 0, pc2 level: 0 [ 1.644736] dp lt: new config: lane 2: vs level: 1, pe level: 0, pc2 level: 0 [ 1.644739] dp lt: new config: lane 3: vs level: 1, pe level: 0, pc2 level: 0 [ 1.644742] dp lt: CR retry [ 1.644746] dp lt: switching from state 2 (clock recovery) to state 2 (clock recovery) [ 1.644756] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 1.644774] dp lt: config: lane 0: vs level: 1, pe level: 0, pc2 level: 0 [ 1.644787] dp lt: config: lane 1: vs level: 1, pe level: 0, pc2 level: 0 [ 1.644800] dp lt: config: lane 2: vs level: 1, pe level: 0, pc2 level: 0 [ 1.644813] dp lt: config: lane 3: vs level: 1, pe level: 0, pc2 level: 0 [ 1.644820] dp lt: tx_pu: 0x30 [ 1.646236] dp lt: CR not done [ 1.646935] dp lt: new config: lane 0: vs level: 2, pe level: 0, pc2 level: 0 [ 1.646939] dp lt: new config: lane 1: vs level: 2, pe level: 0, pc2 level: 0 [ 1.646942] dp lt: new config: lane 2: vs level: 2, pe level: 0, pc2 level: 0 [ 1.646945] dp lt: new config: lane 3: vs level: 2, pe level: 0, pc2 level: 0 [ 1.646948] dp lt: CR retry [ 1.646952] dp lt: switching from state 2 (clock recovery) to state 2 (clock recovery) [ 1.646961] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 1.646981] dp lt: config: lane 0: vs level: 2, pe level: 0, pc2 level: 0 [ 1.646995] dp lt: config: lane 1: vs level: 2, pe level: 0, pc2 level: 0 [ 1.647008] dp lt: config: lane 2: vs level: 2, pe level: 0, pc2 level: 0 [ 1.647021] dp lt: config: lane 3: vs level: 2, pe level: 0, pc2 level: 0 [ 1.647028] dp lt: tx_pu: 0x40 [ 1.648415] dp lt: CR done [ 1.648420] dp lt: switching from state 2 (clock recovery) to state 3 (channel equalization) [ 1.648428] dp lt: state 3 (channel equalization), pending_lt_evt 0 [ 1.649034] loop: module loaded [ 1.649115] tegra_profiler: version: 1.145, samples/io: 49/28 [ 1.649226] tegra_profiler: auth: init [ 1.650655] THERMAL EST: found 2 subdevs [ 1.650663] THERMAL EST num_resources: 0 [ 1.650679] [THERMAL EST subdev 0] [ 1.650687] [THERMAL EST subdev 1] [ 1.651106] dp lt: CE done [ 1.651113] dp lt: switching from state 3 (channel equalization) to state 5 (link training pass) [ 1.651155] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type thermal-fan-est [ 1.651158] THERMAL EST: thz register success. [ 1.651223] extcon-disp-state extcon:disp-state: cable 46 state 1 [ 1.651228] Extcon AUX0(DP): enable [ 1.651232] dp_audio switch 1 [ 1.651852] hpd: state 7 (Takeover from bootloader), hpd 1, pending_hpd_evt 1 [ 1.651858] hpd: switching from state 7 (Takeover from bootloader) to state 1 (Check Plug) [ 1.651905] THERMAL EST: end of probe, return err: 0 [ 1.652971] sd: No Scsi addr parsed to reserve index [ 1.653011] hisi_sas: driver version v1.6 [ 1.657637] tegra-qspi 70410000.spi: Prod settings list not found [ 1.659107] qspi_mtd spi32766.0: MX25U3235F (4096 Kbytes) [ 1.659118] qspi_mtd spi32766.0: mtd .name = spi32766.0, .size = 0x400000 (4MiB) .erasesize = 0x00001000 (4KiB) .numeraseregions = 0 [ 1.665079] tun: Universal TUN/TAP device driver, 1.6 [ 1.665086] tun: (C) 1999-2004 Max Krasnyansky [ 1.666261] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.666265] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.666370] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.666373] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.666462] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 1.666465] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 1.666551] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.4.0-k [ 1.666555] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 1.667663] r8168 0000:02:00.0: enabling device (0000 -> 0003) [ 1.667695] r8168 Gigabit Ethernet driver 8.045.08-NAPI loaded [ 1.682529] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625. [ 1.682590] r8168 Copyright (C) 2017 Realtek NIC software team This program comes with ABSOLUTELY NO WARRANTY; for details, please see . This is free software, and you are welcome to redistribute it under certain conditions; see . [ 1.683245] PPP generic driver version 2.4.2 [ 1.683465] PPP BSD Compression module registered [ 1.683470] PPP Deflate Compression module registered [ 1.683510] PPP MPPE Compression module registered [ 1.683516] NET: Registered protocol family 24 [ 1.683592] usbcore: registered new interface driver r8152 [ 1.683642] usbcore: registered new interface driver asix [ 1.683701] usbcore: registered new interface driver ax88179_178a [ 1.683740] usbcore: registered new interface driver cdc_ether [ 1.683777] usbcore: registered new interface driver net1080 [ 1.683816] usbcore: registered new interface driver cdc_subset [ 1.683863] usbcore: registered new interface driver zaurus [ 1.683927] usbcore: registered new interface driver cdc_ncm [ 1.684096] VFIO - User Level meta-driver version: 0.3 [ 1.685411] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.685436] ehci-pci: EHCI PCI platform driver [ 1.685483] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.685495] ohci-pci: OHCI PCI platform driver [ 1.685537] ohci-platform: OHCI generic platform driver [ 1.688403] tegra-xusb 70090000.xusb: USB2 port 0 has OTG_CAP [ 1.689030] tegra-xusb-padctl 7009f000.xusb_padctl: enabled OTG on UTMI pad 0 [ 1.690229] tegra-xusb 70090000.xusb: extcon 0: (ptrval) id [ 1.692573] usbcore: registered new interface driver uas [ 1.692636] usbcore: registered new interface driver usb-storage [ 1.692760] usbcore: registered new interface driver usbserial [ 1.693105] tegra-xusb 70090000.xusb: Firmware timestamp: 2023-04-25 07:35:59 UTC, Version: 50.29 release [ 1.693179] tegra-xusb 70090000.xusb: xHCI Host Controller [ 1.693213] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 1 [ 1.694022] tegra-xusb 70090000.xusb: hcc params 0x0184f525 hci version 0x100 quirks 0x00050010 [ 1.694089] tegra-xusb 70090000.xusb: irq 61, io mem 0x70090000 [ 1.694491] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.694500] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.694505] usb usb1: Product: xHCI Host Controller [ 1.694510] usb usb1: Manufacturer: Linux 4.9.337-tegra xhci-hcd [ 1.694514] usb usb1: SerialNumber: 70090000.xusb [ 1.695198] hub 1-0:1.0: USB hub found [ 1.695243] hub 1-0:1.0: 5 ports detected [ 1.695881] tegra-xusb 70090000.xusb: xHCI Host Controller [ 1.695896] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 2 [ 1.696058] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.696164] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.696170] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.696175] usb usb2: Product: xHCI Host Controller [ 1.696179] usb usb2: Manufacturer: Linux 4.9.337-tegra xhci-hcd [ 1.696183] usb usb2: SerialNumber: 70090000.xusb [ 1.696320] tegra-xudc-new 700d0000.xudc: device count: 1 [ 1.696747] hub 2-0:1.0: USB hub found [ 1.696788] hub 2-0:1.0: 4 ports detected [ 1.697978] tegra-xusb 70090000.xusb: Upgrade port 0 to USB3.0 [ 1.697985] tegra-xusb 70090000.xusb: Upgrade port 1 to USB3.0 [ 1.698075] tegra-xudc-new 700d0000.xudc: USB charger detection disabled [ 1.698089] tegra-xudc-new 700d0000.xudc: vbus state: 0 [ 1.698608] tegra-xudc-new 700d0000.xudc: entering ELPG [ 1.698922] tegra-xudc-new 700d0000.xudc: entering ELPG done [ 1.699092] mousedev: PS/2 mouse device common for all mice [ 1.699199] usbcore: registered new interface driver xpad [ 1.717821] tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 1 [ 1.717893] tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 2 [ 1.753780] hpd: state 1 (Check Plug), hpd 1, pending_hpd_evt 0 [ 1.753790] hpd: switching from state 1 (Check Plug) to state 2 (Check EDID) [ 1.761739] hpd: state 2 (Check EDID), hpd 1, pending_hpd_evt 0 [ 1.771581] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 1.792911] tegradc tegradc.1: nominal-pclk:653167000 parent:653100000 div:1.0 pclk:653100000 646635330~711952030 [ 1.797014] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 1.797021] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x80 did not specify bpp [ 1.797028] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x400000 did not specify bpp [ 1.797035] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x80 did not specify bpp [ 1.797041] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 1.797047] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x80 did not specify bpp [ 1.797054] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x80 did not specify bpp [ 1.797060] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x80 did not specify bpp [ 1.797066] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 1.797073] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x80 did not specify bpp [ 1.797080] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x80 did not specify bpp [ 1.797086] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 1.797092] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 1.797098] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x80 did not specify bpp [ 1.797104] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x80 did not specify bpp [ 1.797110] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x80 did not specify bpp [ 1.797116] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x80 did not specify bpp [ 1.797122] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 1.797128] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 1.797134] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x80 did not specify bpp [ 1.797140] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 1.797146] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x80 did not specify bpp [ 1.797153] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 1.797159] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 1.797165] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10600000 did not specify bpp [ 1.797171] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 1.797177] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 1.797184] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 1.797190] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 1.797197] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 1.797203] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 1.797210] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 1.797217] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 1.797229] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 1.797235] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 1.797242] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 1.797249] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 1.797256] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 1.797262] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 1.797268] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 1.797273] tegradc tegradc.1: blank - powerdown [ 1.818000] dp lt: state 5 (link training pass), pending_lt_evt 1 [ 1.818003] dp lt: switching from state 5 (link training pass) to state 0 (Reset) [ 1.818007] dp lt: state 0 (Reset), pending_lt_evt 0 [ 1.818012] dp lt: link training force disable [ 1.818015] dp lt: switching from state 0 (Reset) to state 4 (link training fail/disable) [ 1.818820] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 1.820986] rtc rtc1: alarm rtc device [ 1.820998] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.821015] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.821400] i2c /dev entries driver [ 1.823694] imx219 6-0010: tegracam sensor driver:imx219_v2.0.6 [ 1.828496] extcon-disp-state extcon:disp-state: cable 46 state 0 [ 1.828498] Extcon AUX0(DP) disable [ 1.828500] dp_audio switch 0 [ 1.829242] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 1.829269] tegradc tegradc.1: unblank [ 1.846999] tegra-vii2c 546c0000.i2c: no acknowledge from address 0x10 [ 1.847064] imx219 6-0010: imx219_board_setup: error during i2c read probe (-121) [ 1.847192] imx219 6-0010: board setup failed [ 1.847276] imx219: probe of 6-0010 failed with error -121 [ 1.848962] max77620-power max77620-power: Event recorder REG_NVERC : 0x0 [ 1.851648] tegra_soctherm 700e2000.soctherm: pllx_offset tz:0 max:14, min:2 [ 1.851653] tegra_soctherm 700e2000.soctherm: pllx_offset tz:2 max:8, min:4 [ 1.852136] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.852151] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when cpu reaches 102500 mC [ 1.852159] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when cpu reaches 100500 mC [ 1.852306] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.852315] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when gpu reaches 103000 mC [ 1.852321] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when gpu reaches 101000 mC [ 1.852474] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.852483] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when pll reaches 127000 mC [ 1.852488] tegra_soctherm 700e2000.soctherm: throttrip: pll: missing hot temperature [ 1.852679] tegra_soctherm 700e2000.soctherm: failed to register sensor: -19 [ 1.853610] tegra_aotag tegra-aotag: Registering sensor 0 [ 1.853670] tegra_aotag tegra-aotag: Invalid temp readout [ 1.853692] tegra_aotag tegra-aotag: Invalid temp readout [ 1.853709] tegra_aotag tegra-aotag: Bound to TZ : ID 0 [ 1.853753] tegra_aotag tegra-aotag: Probe done [SUCCESS]:0 [ 1.854871] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.854892] tegra_dfll_action dfll-cdev-cap: Tegra DFLL 'cap cooling device' registered [ 1.855082] tegra_aotag tegra-aotag: Invalid temp readout [ 1.855114] tegra_dfll_action dfll-cdev-floor: Tegra DFLL 'floor cooling device' registered [ 1.855609] parse_throttle_dt_data: Num cap clks = 6 [ 1.855617] parse_throttle_dt_data: clk=cclk_g type=2 [ 1.855630] parse_throttle_dt_data: clk=gpu type=4 [ 1.855661] parse_throttle_dt_data: clk=cap.throttle.c2bus type=0 [ 1.855687] parse_throttle_dt_data: clk=cap.throttle.c3bus type=0 [ 1.855714] parse_throttle_dt_data: clk=cap.throttle.sclk type=0 [ 1.855717] parse_throttle_dt_data: clk=emc type=3 [ 1.856075] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.856183] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 1.856326] tegra_throttle_probe: probe successful. #cdevs=4 [ 1.857255] FAN dev name: pwm-fan [ 1.857330] FAN:gpio request success. [ 1.857401] pwm_fan_driver pwm-fan: cap state:7, cap pwm:255 [ 1.857766] pwm_fan_driver pwm-fan: got pwm for fan. polarity is normal [ 1.857938] pwm_fan_driver pwm-fan: fan tach request irq success [ 1.857948] pwm_fan_driver pwm-fan: tach period: 1000 [ 1.858054] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2 [ 1.858058] pwm_fan_driver pwm-fan: index 1: pwm=80, rpm=1000, rru=2, rrd=2, state:2 [ 1.858063] pwm_fan_driver pwm-fan: index 2: pwm=120, rpm=2000, rru=1, rrd=1, state:2 [ 1.858068] pwm_fan_driver pwm-fan: index 3: pwm=160, rpm=3000, rru=1, rrd=1, state:2 [ 1.858072] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3 [ 1.858077] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3 [ 1.858081] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3 [ 1.858085] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4 [ 1.858089] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4 [ 1.858093] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4 [ 1.860848] device-mapper: uevent: version 1.0.3 [ 1.861377] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.866166] tegra210-cpufreq cpufreq: probe()...completed [ 1.866309] tegradc tegradc.1: nominal-pclk:653100000 parent:653100000 div:1.0 pclk:653100000 646569000~711879000 [ 1.867051] sdhci: Secure Digital Host Controller Interface driver [ 1.867053] sdhci: Copyright(c) Pierre Ossman [ 1.867054] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.867451] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 1.867530] sdhci-tegra sdhci-tegra.0: Got CD GPIO [ 1.867888] sdhci-tegra sdhci-tegra.0: Client registration for eMC Successful [ 1.868009] sdhci-tegra sdhci-tegra.0: wakeup init done, cdirq 300 [ 1.871042] tegradc tegradc.1: DP: no prod_c_hbr2 prod settings node in device tree [ 1.872273] tegra-se 70012000.se: tegra_se_probe: complete [ 1.872809] hidraw: raw HID events driver (C) Jiri Kosina [ 1.874118] usbcore: registered new interface driver usbhid [ 1.874119] usbhid: USB HID core driver [ 1.875432] dp lt: state 4 (link training fail/disable), pending_lt_evt 1 [ 1.875434] dp lt: switching from state 4 (link training fail/disable) to state 0 (Reset) [ 1.875437] dp lt: state 0 (Reset), pending_lt_evt 0 [ 1.875543] ashmem: initialized [ 1.876629] tegradc tegradc.1: DP: no prod_c_hbr2 prod settings node in device tree [ 1.876728] tegra21x_actmon 6000c800.actmon: in actmon_register()... [ 1.876766] dp lt: switching from state 0 (Reset) to state 2 (clock recovery) [ 1.876770] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 1.876889] tegra21x_actmon 6000c800.actmon: initialization Completed for the device mc_all [ 1.877004] dp lt: config: lane 0: vs level: 0, pe level: 0, pc2 level: 0 [ 1.877015] dp lt: config: lane 1: vs level: 0, pe level: 0, pc2 level: 0 [ 1.877026] dp lt: config: lane 2: vs level: 0, pe level: 0, pc2 level: 0 [ 1.877035] dp lt: config: lane 3: vs level: 0, pe level: 0, pc2 level: 0 [ 1.877040] dp lt: tx_pu: 0x20 [ 1.878424] dp lt: CR not done [ 1.879092] nvpmodel: initialized successfully [ 1.879304] dp lt: new config: lane 0: vs level: 1, pe level: 0, pc2 level: 0 [ 1.879306] dp lt: new config: lane 1: vs level: 1, pe level: 0, pc2 level: 0 [ 1.879307] dp lt: new config: lane 2: vs level: 1, pe level: 0, pc2 level: 0 [ 1.879309] dp lt: new config: lane 3: vs level: 1, pe level: 0, pc2 level: 0 [ 1.879310] dp lt: CR retry [ 1.879312] dp lt: switching from state 2 (clock recovery) to state 2 (clock recovery) [ 1.879317] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 1.879331] dp lt: config: lane 0: vs level: 1, pe level: 0, pc2 level: 0 [ 1.879340] dp lt: config: lane 1: vs level: 1, pe level: 0, pc2 level: 0 [ 1.879350] dp lt: config: lane 2: vs level: 1, pe level: 0, pc2 level: 0 [ 1.879361] dp lt: config: lane 3: vs level: 1, pe level: 0, pc2 level: 0 [ 1.879366] dp lt: tx_pu: 0x30 [ 1.880177] usbcore: registered new interface driver snd-usb-audio [ 1.880230] No Device Node present for smmu client: snd-soc-dummy !! [ 1.880234] platform snd-soc-dummy: No iommus property found in DT node, got swgids from fixup(101004000) [ 1.880253] iommu: Adding device snd-soc-dummy to group 41 [ 1.880705] dp lt: CR not done [ 1.881371] dp lt: new config: lane 0: vs level: 2, pe level: 0, pc2 level: 0 [ 1.881373] dp lt: new config: lane 1: vs level: 2, pe level: 0, pc2 level: 0 [ 1.881374] dp lt: new config: lane 2: vs level: 2, pe level: 0, pc2 level: 0 [ 1.881376] dp lt: new config: lane 3: vs level: 2, pe level: 0, pc2 level: 0 [ 1.881377] dp lt: CR retry [ 1.881379] dp lt: switching from state 2 (clock recovery) to state 2 (clock recovery) [ 1.881382] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 1.881397] dp lt: config: lane 0: vs level: 2, pe level: 0, pc2 level: 0 [ 1.881408] dp lt: config: lane 1: vs level: 2, pe level: 0, pc2 level: 0 [ 1.881419] dp lt: config: lane 2: vs level: 2, pe level: 0, pc2 level: 0 [ 1.881430] dp lt: config: lane 3: vs level: 2, pe level: 0, pc2 level: 0 [ 1.881434] dp lt: tx_pu: 0x40 [ 1.882773] dp lt: CR done [ 1.882775] dp lt: switching from state 2 (clock recovery) to state 3 (channel equalization) [ 1.882778] dp lt: state 3 (channel equalization), pending_lt_evt 0 [ 1.885024] dp lt: CE done [ 1.885027] dp lt: switching from state 3 (channel equalization) to state 5 (link training pass) [ 1.885069] extcon-disp-state extcon:disp-state: cable 46 state 1 [ 1.885071] Extcon AUX0(DP): enable [ 1.885072] dp_audio switch 1 [ 1.885572] input: tegra-hda HDMI/DP,pcm=3 as /devices/70030000.hda/sound/card0/input0 [ 1.892017] tegradc tegradc.1: sync windows ret = 248 [ 1.898983] OPE platform probe [ 1.899070] OPE platform probe successful [ 1.899096] OPE platform probe [ 1.899181] OPE platform probe successful [ 1.904062] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 1.904069] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x80 did not specify bpp [ 1.904074] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x400000 did not specify bpp [ 1.904079] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x80 did not specify bpp [ 1.904083] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 1.904088] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x80 did not specify bpp [ 1.904092] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x80 did not specify bpp [ 1.904097] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x80 did not specify bpp [ 1.904102] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 1.904106] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x80 did not specify bpp [ 1.904111] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x80 did not specify bpp [ 1.904115] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 1.904120] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 1.904125] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x80 did not specify bpp [ 1.904130] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x80 did not specify bpp [ 1.904134] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x80 did not specify bpp [ 1.904139] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x80 did not specify bpp [ 1.904143] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 1.904148] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 1.904153] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x80 did not specify bpp [ 1.904158] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 1.904162] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x80 did not specify bpp [ 1.904167] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x0 did not specify bpp [ 1.904172] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 1.904176] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10600000 did not specify bpp [ 1.904181] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 1.904186] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 1.904191] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 1.904196] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 1.904201] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 1.904206] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 1.904211] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 1.904215] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 1.904220] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 1.904225] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 1.904230] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10400000 did not specify bpp [ 1.904236] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 1.904240] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 1.904245] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 1.904250] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x10420000 did not specify bpp [ 1.904253] tegradc tegradc.1: blank - powerdown [ 1.914036] mmc0: SDHCI controller on sdhci-tegra.0 [sdhci-tegra.0] using ADMA 64-bit with 64 bit addr [ 1.919878] dp lt: state 5 (link training pass), pending_lt_evt 1 [ 1.919882] dp lt: switching from state 5 (link training pass) to state 0 (Reset) [ 1.919885] dp lt: state 0 (Reset), pending_lt_evt 0 [ 1.919892] dp lt: link training force disable [ 1.919894] dp lt: switching from state 0 (Reset) to state 4 (link training fail/disable) [ 1.925952] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok [ 1.926080] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok [ 1.926198] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok [ 1.926317] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok [ 1.926438] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok [ 1.926558] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok [ 1.926688] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok [ 1.927046] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok [ 1.927169] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok [ 1.927285] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok [ 1.930423] extcon-disp-state extcon:disp-state: cable 46 state 0 [ 1.930425] Extcon AUX0(DP) disable [ 1.930426] dp_audio switch 0 [ 1.930825] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 1.930835] tegradc tegradc.1: unblank [ 1.939177] u32 classifier [ 1.939179] Actions configured [ 1.939246] Initializing XFRM netlink socket [ 1.939970] NET: Registered protocol family 10 [ 1.940659] NET: Registered protocol family 17 [ 1.940669] NET: Registered protocol family 15 [ 1.940751] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 1.940797] Bluetooth: RFCOMM socket layer initialized [ 1.940805] Bluetooth: RFCOMM ver 1.11 [ 1.940810] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.940814] Bluetooth: HIDP socket layer initialized [ 1.940830] 9pnet: Installing 9P2000 support [ 1.940874] Key type dns_resolver registered [ 1.941234] Registered cp15_barrier emulation handler [ 1.941240] Registered setend emulation handler [ 1.941785] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 1.942424] registered taskstats version 1 [ 1.943033] Adding domain ve2-pd to PM domain host1x-pd [ 1.943266] Adding domain ve-pd to PM domain host1x-pd [ 1.945412] isp 54600000.isp: initialized [ 1.946349] isp 54680000.isp: initialized [ 1.956573] last reset is due to software reset [ 1.956576] KERNEL: PMC reset status reg: 0x3 [ 1.956634] BL: PMC reset status reg: 0x3 [ 1.956636] BL: PMIC poweroff Event Recorder: 0x0 [ 1.958219] clk_cbus_recalc_rate: no gbus parent [ 1.958224] clk_cbus_round_rate: no gbus parent [ 1.958225] clk_cbus_round_rate: no gbus parent [ 1.958230] clk_cbus_recalc_rate: no gbus parent [ 1.958333] clk_cbus_recalc_rate: no gbus parent [ 1.958335] clk_cbus_round_rate: no gbus parent [ 1.958336] clk_cbus_round_rate: no gbus parent [ 1.958339] clk_cbus_recalc_rate: no gbus parent [ 1.959019] tegra_dvfs: GPU-cap: registered [ 1.959078] tegra dvfs: vdd-cpu: nominal 1168mV, offset 708000uV, step 19200uV, scaling enabled [ 1.959080] tegra dvfs: vdd-core: nominal 1075mV, offset 600000uV, step 12500uV, scaling enabled [ 1.959082] tegra dvfs: vdd-gpu: nominal 1068mV, offset 708000uV, step 10000uV, scaling enabled [ 1.960099] tegra_dvfs: vdd-gpu-vts: registered [ 1.960480] tegra_core_action core_dvfs_cdev_floor: Tegra CORE DVFS 'floor cooling device' registered [ 1.961110] tegra_core_action core_dvfs_cdev_cap: Tegra CORE DVFS 'cap cooling device' registered [ 1.961605] input: gpio-keys as /devices/gpio-keys/input/input1 [ 1.962499] tegradc tegradc.1: nominal-pclk:653100000 parent:653100000 div:1.0 pclk:653100000 646569000~711879000 [ 1.963661] tegradc tegradc.1: tegra_dp_get_bpp: vmode=0x200000 did not specify bpp [ 1.967257] tegradc tegradc.1: DP: no prod_c_hbr2 prod settings node in device tree [ 1.971684] dp lt: state 4 (link training fail/disable), pending_lt_evt 1 [ 1.971685] dp lt: switching from state 4 (link training fail/disable) to state 0 (Reset) [ 1.971687] dp lt: state 0 (Reset), pending_lt_evt 0 [ 1.972882] tegradc tegradc.1: DP: no prod_c_hbr2 prod settings node in device tree [ 1.973016] dp lt: switching from state 0 (Reset) to state 2 (clock recovery) [ 1.973019] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 1.973251] dp lt: config: lane 0: vs level: 0, pe level: 0, pc2 level: 0 [ 1.973261] dp lt: config: lane 1: vs level: 0, pe level: 0, pc2 level: 0 [ 1.973270] dp lt: config: lane 2: vs level: 0, pe level: 0, pc2 level: 0 [ 1.973279] dp lt: config: lane 3: vs level: 0, pe level: 0, pc2 level: 0 [ 1.973284] dp lt: tx_pu: 0x20 [ 1.974616] dp lt: CR not done [ 1.975277] dp lt: new config: lane 0: vs level: 1, pe level: 0, pc2 level: 0 [ 1.975278] dp lt: new config: lane 1: vs level: 1, pe level: 0, pc2 level: 0 [ 1.975280] dp lt: new config: lane 2: vs level: 1, pe level: 0, pc2 level: 0 [ 1.975281] dp lt: new config: lane 3: vs level: 1, pe level: 0, pc2 level: 0 [ 1.975282] dp lt: CR retry [ 1.975284] dp lt: switching from state 2 (clock recovery) to state 2 (clock recovery) [ 1.975287] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 1.975299] dp lt: config: lane 0: vs level: 1, pe level: 0, pc2 level: 0 [ 1.975309] dp lt: config: lane 1: vs level: 1, pe level: 0, pc2 level: 0 [ 1.975319] dp lt: config: lane 2: vs level: 1, pe level: 0, pc2 level: 0 [ 1.975328] dp lt: config: lane 3: vs level: 1, pe level: 0, pc2 level: 0 [ 1.975332] dp lt: tx_pu: 0x30 [ 1.976657] dp lt: CR not done [ 1.977337] dp lt: new config: lane 0: vs level: 2, pe level: 0, pc2 level: 0 [ 1.977339] dp lt: new config: lane 1: vs level: 2, pe level: 0, pc2 level: 0 [ 1.977340] dp lt: new config: lane 2: vs level: 2, pe level: 0, pc2 level: 0 [ 1.977342] dp lt: new config: lane 3: vs level: 2, pe level: 0, pc2 level: 0 [ 1.977343] dp lt: CR retry [ 1.977344] dp lt: switching from state 2 (clock recovery) to state 2 (clock recovery) [ 1.977347] dp lt: state 2 (clock recovery), pending_lt_evt 0 [ 1.977359] dp lt: config: lane 0: vs level: 2, pe level: 0, pc2 level: 0 [ 1.977369] dp lt: config: lane 1: vs level: 2, pe level: 0, pc2 level: 0 [ 1.977378] dp lt: config: lane 2: vs level: 2, pe level: 0, pc2 level: 0 [ 1.977388] dp lt: config: lane 3: vs level: 2, pe level: 0, pc2 level: 0 [ 1.977392] dp lt: tx_pu: 0x40 [ 1.978720] dp lt: CR done [ 1.978722] dp lt: switching from state 2 (clock recovery) to state 3 (channel equalization) [ 1.978725] dp lt: state 3 (channel equalization), pending_lt_evt 0 [ 1.980961] dp lt: CE done [ 1.980964] dp lt: switching from state 3 (channel equalization) to state 5 (link training pass) [ 1.980999] extcon-disp-state extcon:disp-state: cable 46 state 1 [ 1.981000] Extcon AUX0(DP): enable [ 1.981001] dp_audio switch 1 [ 1.982441] usb 1-2: New USB device found, idVendor=0bda, idProduct=5411 [ 1.982444] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.982447] usb 1-2: Product: 4-Port USB 2.1 Hub [ 1.982449] usb 1-2: Manufacturer: Generic [ 1.985937] hub 1-2:1.0: USB hub found [ 1.987022] hub 1-2:1.0: 4 ports detected [ 1.988272] tegradc tegradc.1: sync windows ret = 248 [ 1.988360] extcon-disp-state extcon:disp-state: cable 44 state 1 [ 1.988363] Extcon DP: HPD enabled [ 1.988378] hpd: Display connected, hpd_switch 1 [ 1.988382] hpd: switching from state 2 (Check EDID) to state 4 (Enabled) [ 1.996273] tegra_rtc 7000e000.rtc: setting system clock to 2023-11-12 06:58:59 UTC (1699772339) [ 1.997219] vi 54080000.vi: vi_probe: ++ [ 1.998706] vi 54080000.vi: initialized [ 2.000325] vi 54080000.vi: subdev nvcsi--1 bound [ 2.001813] Disable partitions left on by BL [ 2.001816] disb [ 2.001860] bwmgr: missing cdev-type property [ 2.001990] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 2.001997] DRAM derating cdev registered. [ 2.002987] ALSA device list: [ 2.002992] #0: tegra-hda at 0x70038000 irq 83 [ 2.002994] #1: tegra-snd-t210ref-mobile-rt565x [ 2.006417] Freeing unused kernel memory: 8640K [ 2.031959] Root device found: mmcblk0p1 [ 2.091738] usb 2-1: new SuperSpeed USB device number 2 using tegra-xusb [ 2.106593] tegra_cec 70015000.tegra_cec: Can't find physical addresse. [ 2.106597] tegra_cec 70015000.tegra_cec: tegra_cec_init Done. [ 2.108676] mmc0: hw tuning done ... [ 2.108710] mmc0: new ultra high speed SDR104 SDXC card at address 0007 [ 2.113190] mmcblk0: mmc0:0007 SD128 116 GiB [ 2.118720] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 [ 2.121752] tegra-xusb-padctl 7009f000.xusb_padctl: power down UTMI pad 1 [ 2.125863] usb 2-1: New USB device found, idVendor=0bda, idProduct=0411 [ 2.125866] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.125869] usb 2-1: Product: 4-Port USB 3.1 Hub [ 2.125872] usb 2-1: Manufacturer: Generic [ 2.130120] hub 2-1:1.0: USB hub found [ 2.131524] hub 2-1:1.0: 4 ports detected [ 2.141741] usb 1-2: usb_suspend_both: status 0 [ 2.237083] Found dev node: /dev/mmcblk0p1 [ 2.237753] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 2.263696] usb 1-3: New USB device found, idVendor=8087, idProduct=0a2b [ 2.263701] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.280717] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 2.282758] Rootfs mounted over mmcblk0p1 [ 2.293765] usb 2-1: usb_suspend_both: status 0 [ 2.293906] usb usb2: usb_suspend_both: status 0 [ 2.310259] Switching from initrd to actual rootfs [ 2.627944] ip_tables: (C) 2000-2006 Netfilter Core Team [ 2.641561] cgroup: cgroup2: unknown option "nsdelegate" [ 2.665733] systemd[1]: systemd 245.4-4ubuntu3.22 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 2.666601] systemd[1]: Detected architecture arm64. [ 2.691580] systemd[1]: Set hostname to . [ 3.195345] random: systemd: uninitialized urandom read (16 bytes read) [ 3.195496] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 3.195506] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 3.198347] systemd[1]: Created slice system-modprobe.slice. [ 3.198479] random: systemd: uninitialized urandom read (16 bytes read) [ 3.199346] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 3.199382] random: systemd: uninitialized urandom read (16 bytes read) [ 3.200111] systemd[1]: Created slice User and Session Slice. [ 3.200305] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 3.202376] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 3.202534] systemd[1]: Reached target User and Group Name Lookups. [ 3.202611] systemd[1]: Reached target Slices. [ 3.202662] systemd[1]: Reached target Mounting snaps. [ 3.202715] systemd[1]: Reached target Swap. [ 3.207252] systemd[1]: Listening on RPCbind Server Activation Socket. [ 3.207503] systemd[1]: Listening on Syslog Socket. [ 3.207706] systemd[1]: Listening on fsck to fsckd communication Socket. [ 3.207858] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 3.208293] systemd[1]: Listening on Journal Audit Socket. [ 3.208507] systemd[1]: Listening on Journal Socket (/dev/log). [ 3.208781] systemd[1]: Listening on Journal Socket. [ 3.209040] systemd[1]: Listening on udev Control Socket. [ 3.209199] systemd[1]: Listening on udev Kernel Socket. [ 3.212014] systemd[1]: Mounting Huge Pages File System... [ 3.214855] systemd[1]: Mounting POSIX Message Queue File System... [ 3.217492] systemd[1]: Mounting RPC Pipe File System... [ 3.220523] systemd[1]: Mounting Kernel Debug File System... [ 3.223550] systemd[1]: Mounting Kernel Trace File System... [ 3.227155] systemd[1]: Starting Journal Service... [ 3.235024] systemd[1]: Starting Set the console keyboard layout... [ 3.238086] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 3.240904] systemd[1]: Starting Load Kernel Module chromeos_pstore... [ 3.241031] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 3.243885] systemd[1]: Starting Load Kernel Module efi_pstore... [ 3.246866] systemd[1]: Starting Load Kernel Module pstore_blk... [ 3.249701] systemd[1]: Starting Load Kernel Module pstore_zone... [ 3.249854] systemd[1]: Condition check resulted in Load Kernel Module ramoops being skipped. [ 3.253072] systemd[1]: Started Nameserver information manager. [ 3.253561] systemd[1]: Reached target Network (Pre). [ 3.256018] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 3.256137] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 3.262868] systemd[1]: Starting Load Kernel Modules... [ 3.265876] systemd[1]: Starting Remount Root and Kernel File Systems... [ 3.268743] systemd[1]: Starting udev Coldplug all Devices... [ 3.273388] systemd[1]: Mounted Huge Pages File System. [ 3.273955] systemd[1]: Mounted POSIX Message Queue File System. [ 3.274413] systemd[1]: Mounted RPC Pipe File System. [ 3.274843] systemd[1]: Mounted Kernel Debug File System. [ 3.275263] systemd[1]: Mounted Kernel Trace File System. [ 3.277459] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 3.278528] systemd[1]: modprobe@chromeos_pstore.service: Succeeded. [ 3.279655] systemd[1]: Finished Load Kernel Module chromeos_pstore. [ 3.280620] systemd[1]: modprobe@efi_pstore.service: Succeeded. [ 3.281792] systemd[1]: Finished Load Kernel Module efi_pstore. [ 3.282713] systemd[1]: modprobe@pstore_blk.service: Succeeded. [ 3.283851] systemd[1]: Finished Load Kernel Module pstore_blk. [ 3.284762] systemd[1]: modprobe@pstore_zone.service: Succeeded. [ 3.285927] systemd[1]: Finished Load Kernel Module pstore_zone. [ 3.292853] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 3.400250] systemd[1]: Finished Remount Root and Kernel File Systems. [ 3.406117] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 3.409129] systemd[1]: Starting Platform Persistent Storage Archival... [ 3.412371] systemd[1]: Starting Load/Save Random Seed... [ 3.414039] nvgpu: 57000000.gpu gm20b_init_clk_setup_sw:1268 [INFO] GPCPLL initial settings: NA mode, M=1, N=34, P=3 (id = 1) [ 3.431435] systemd[1]: Starting Create System Users... [ 3.433806] systemd[1]: Finished Load Kernel Modules. [ 3.434535] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 3.437424] systemd[1]: Mounting Kernel Configuration File System... [ 3.441586] systemd[1]: Starting Apply Kernel Variables... [ 3.448703] systemd[1]: Mounted Kernel Configuration File System. [ 3.480644] systemd[1]: Finished Set the console keyboard layout. [ 3.490277] systemd[1]: Finished Create System Users. [ 3.493339] systemd[1]: Starting Create Static Device Nodes in /dev... [ 3.537565] systemd[1]: Finished Platform Persistent Storage Archival. [ 3.540246] systemd[1]: Finished Apply Kernel Variables. [ 3.607875] systemd[1]: Finished Create Static Device Nodes in /dev. [ 3.608326] systemd[1]: Reached target Local File Systems (Pre). [ 3.614562] systemd[1]: Mounting Mount unit for bare, revision 5... [ 3.618915] systemd[1]: Mounting Mount unit for core22, revision 867... [ 3.634412] systemd[1]: Mounting Mount unit for cups, revision 981... [ 3.637989] systemd[1]: Mounting Mount unit for snapd, revision 20298... [ 3.640639] systemd[1]: Starting udev Kernel Device Manager... [ 3.641165] systemd[1]: Started Journal Service. [ 3.650566] squashfs: SQUASHFS error: Xattrs in filesystem, these will be ignored [ 3.658255] squashfs: SQUASHFS error: unable to read xattr id index table [ 3.674920] systemd-journald[1960]: Received client request to flush runtime journal. [ 4.264015] random: systemd: uninitialized urandom read (16 bytes read) [ 4.348963] random: systemd: uninitialized urandom read (16 bytes read) [ 4.538650] random: systemd: uninitialized urandom read (16 bytes read) [ 4.610086] Intel(R) Wireless WiFi driver for Linux [ 4.610090] Copyright(c) 2003- 2015 Intel Corporation [ 4.610430] iwlwifi 0000:01:00.0: enabling device (0000 -> 0002) [ 4.618633] iwlwifi 0000:01:00.0: Direct firmware load for iwlwifi-8265-26.ucode failed with error -2 [ 4.628542] iwlwifi 0000:01:00.0: Falling back to user helper [ 4.658804] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 4.658828] cpu-throttle-alert cooling device registered. [ 4.658968] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 4.658984] gpu-throttle-alert cooling device registered. [ 4.659141] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 4.659154] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000 [ 4.659167] hot-surface-alert cooling device registered. [ 5.159947] usbcore: registered new interface driver btusb [ 5.166059] Bluetooth: hci0: Bootloader revision 0.0 build 26 week 38 2015 [ 5.166622] Bluetooth: hci0: Device revision is 16 [ 5.166625] Bluetooth: hci0: Secure boot is enabled [ 5.166628] Bluetooth: hci0: OTP lock is enabled [ 5.166630] Bluetooth: hci0: API lock is enabled [ 5.166632] Bluetooth: hci0: Debug lock is disabled [ 5.166635] Bluetooth: hci0: Minimum firmware build 1 week 10 2014 [ 5.175446] iwlwifi 0000:01:00.0: Direct firmware load for iwlwifi-8265-25.ucode failed with error -2 [ 5.186000] iwlwifi 0000:01:00.0: Falling back to user helper [ 5.193880] iwlwifi 0000:01:00.0: Direct firmware load for iwlwifi-8265-24.ucode failed with error -2 [ 5.203274] iwlwifi 0000:01:00.0: Falling back to user helper [ 5.212260] iwlwifi 0000:01:00.0: Direct firmware load for iwlwifi-8265-23.ucode failed with error -2 [ 5.221638] iwlwifi 0000:01:00.0: Falling back to user helper [ 5.235483] Bluetooth: hci0: Found device firmware: intel/ibt-12-16.sfi [ 5.286620] iwlwifi 0000:01:00.0: loaded firmware version 22.391740.0 op_mode iwlmvm [ 5.294132] random: systemd: uninitialized urandom read (16 bytes read) [ 5.300968] random: systemd: uninitialized urandom read (16 bytes read) [ 5.310278] random: systemd: uninitialized urandom read (16 bytes read) [ 5.384628] iwlwifi 0000:01:00.0: Detected Intel(R) Dual Band Wireless AC 8265, REV=0x230 [ 5.385862] iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled [ 5.386541] iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled [ 5.506396] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 5.507365] thermal thermal_zone6: failed to read out thermal zone (-5) [ 5.514117] thermal thermal_zone6: Registering thermal zone thermal_zone6 for type iwlwifi_1 [ 5.977745] random: crng init done [ 5.981193] random: 211 urandom warning(s) missed due to ratelimiting [ 6.538374] using random self ethernet address [ 6.542982] using random host ethernet address [ 6.744286] Bluetooth: hci0: Waiting for firmware download to complete [ 6.744571] Bluetooth: hci0: Firmware loaded in 1547506 usecs [ 6.744697] Bluetooth: hci0: Waiting for device to boot [ 6.756580] Bluetooth: hci0: Device booted in 11638 usecs [ 6.772252] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-12-16.ddc [ 6.774640] Bluetooth: hci0: Applying Intel DDC parameters completed [ 7.354096] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 7.354108] Bluetooth: BNEP socket layer initialized [ 8.135834] Mass Storage Function, version: 2009/09/11 [ 8.135841] LUN: removable file: (no medium) [ 8.146296] using random self ethernet address [ 8.151335] using random host ethernet address [ 8.422688] rndis0: HOST MAC ba:48:8f:03:3d:c0 [ 8.423021] rndis0: MAC ba:48:8f:03:3d:c1 [ 8.429785] usb0: HOST MAC ba:48:8f:03:3d:c2 [ 8.430160] usb0: MAC ba:48:8f:03:3d:c3 [ 8.430186] tegra-xudc-new 700d0000.xudc: exiting ELPG [ 8.431843] tegra-xudc-new 700d0000.xudc: exiting ELPG done [ 8.431864] tegra-xudc-new 700d0000.xudc: ep 0 (type: 0, dir: out) enabled [ 8.432518] tegra-xudc-new 700d0000.xudc: entering ELPG [ 8.432759] tegra-xudc-new 700d0000.xudc: entering ELPG done [ 8.432786] tegra-xudc-new 700d0000.xudc: exiting ELPG [ 8.433398] tegra-xudc-new 700d0000.xudc: exiting ELPG done [ 8.433411] tegra-xudc-new 700d0000.xudc: entering ELPG [ 8.433657] tegra-xudc-new 700d0000.xudc: entering ELPG done [ 8.439643] l4tbr0: port 1(rndis0) entered blocking state [ 8.439649] l4tbr0: port 1(rndis0) entered disabled state [ 8.439832] device rndis0 entered promiscuous mode [ 8.448249] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready [ 8.455899] l4tbr0: port 2(usb0) entered blocking state [ 8.455904] l4tbr0: port 2(usb0) entered disabled state [ 8.456077] device usb0 entered promiscuous mode [ 8.477117] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready [ 8.642381] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 8.707808] eth0: 0xffffff800a43c000, 00:e0:4c:68:04:53, IRQ 406 [ 8.812746] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 8.829007] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 8.832263] iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled [ 8.832579] iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled [ 8.977854] iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled [ 8.978166] iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled [ 9.049314] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 9.383748] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 9.573137] zram: Added device: zram0 [ 9.578375] zram: Added device: zram1 [ 9.591829] zram: Added device: zram2 [ 9.600531] zram: Added device: zram3 [ 9.629246] zram0: detected capacity change from 0 to 519561216 [ 9.984654] Adding 507380k swap on /dev/zram0. Priority:5 extents:1 across:507380k SS [ 9.989565] zram1: detected capacity change from 0 to 519561216 [ 10.003508] Adding 507380k swap on /dev/zram1. Priority:5 extents:1 across:507380k SS [ 10.008625] zram2: detected capacity change from 0 to 519561216 [ 10.020311] Adding 507380k swap on /dev/zram2. Priority:5 extents:1 across:507380k SS [ 10.024292] zram3: detected capacity change from 0 to 519561216 [ 10.049185] Adding 507380k swap on /dev/zram3. Priority:5 extents:1 across:507380k SS [ 10.928063] Bridge firewalling registered [ 10.992740] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 11.094266] Netfilter messages via NETLINK v0.30. [ 11.097441] ctnetlink v0.93: registering with nfnetlink. [ 11.222091] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready [ 11.372280] IPv6: ADDRCONF(NETDEV_UP): br-6bff5628a2a1: link is not ready [ 11.746789] br-6bff5628a2a1: port 1(veth209b75c) entered blocking state [ 11.746794] br-6bff5628a2a1: port 1(veth209b75c) entered disabled state [ 11.746934] device veth209b75c entered promiscuous mode [ 11.747093] IPv6: ADDRCONF(NETDEV_UP): veth209b75c: link is not ready [ 11.747098] br-6bff5628a2a1: port 1(veth209b75c) entered blocking state [ 11.747101] br-6bff5628a2a1: port 1(veth209b75c) entered forwarding state [ 11.747180] IPv6: ADDRCONF(NETDEV_CHANGE): br-6bff5628a2a1: link becomes ready [ 11.747299] br-6bff5628a2a1: port 1(veth209b75c) entered disabled state [ 11.828212] br-6bff5628a2a1: port 2(veth96c385b) entered blocking state [ 11.828218] br-6bff5628a2a1: port 2(veth96c385b) entered disabled state [ 11.828820] device veth96c385b entered promiscuous mode [ 11.843722] IPv6: ADDRCONF(NETDEV_UP): veth96c385b: link is not ready [ 11.843730] br-6bff5628a2a1: port 2(veth96c385b) entered blocking state [ 11.843734] br-6bff5628a2a1: port 2(veth96c385b) entered forwarding state [ 11.880594] br-6bff5628a2a1: port 3(veth35148e3) entered blocking state [ 11.880599] br-6bff5628a2a1: port 3(veth35148e3) entered disabled state [ 11.880892] device veth35148e3 entered promiscuous mode [ 11.882376] IPv6: ADDRCONF(NETDEV_UP): veth35148e3: link is not ready [ 11.882383] br-6bff5628a2a1: port 3(veth35148e3) entered blocking state [ 11.882386] br-6bff5628a2a1: port 3(veth35148e3) entered forwarding state [ 12.132040] br-6bff5628a2a1: port 2(veth96c385b) entered disabled state [ 12.140740] br-6bff5628a2a1: port 3(veth35148e3) entered disabled state [ 12.515099] cgroup: cgroup: disabling cgroup2 socket matching due to net_prio or net_cls activation [ 12.832375] wlan0: authenticate with 8c:c5:b4:43:c0:a5 [ 12.868526] wlan0: send auth to 8c:c5:b4:43:c0:a5 (try 1/3) [ 12.878752] wlan0: authenticated [ 12.898931] eth0: renamed from veth84fd7d5 [ 12.916510] IPv6: ADDRCONF(NETDEV_CHANGE): veth209b75c: link becomes ready [ 12.916576] br-6bff5628a2a1: port 1(veth209b75c) entered blocking state [ 12.916579] br-6bff5628a2a1: port 1(veth209b75c) entered forwarding state [ 12.917819] wlan0: associate with 8c:c5:b4:43:c0:a5 (try 1/3) [ 12.921551] wlan0: RX AssocResp from 8c:c5:b4:43:c0:a5 (capab=0x1511 status=0 aid=55) [ 12.925913] wlan0: associated [ 12.983172] wlan0: Limiting TX power to 25 (25 - 0) dBm as advertised by 8c:c5:b4:43:c0:a5 [ 12.987080] eth0: renamed from veth5794f05 [ 13.010511] IPv6: ADDRCONF(NETDEV_CHANGE): veth35148e3: link becomes ready [ 13.010584] br-6bff5628a2a1: port 3(veth35148e3) entered blocking state [ 13.010588] br-6bff5628a2a1: port 3(veth35148e3) entered forwarding state [ 13.018610] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 13.046591] eth0: renamed from vethdd0807b [ 13.063020] IPv6: ADDRCONF(NETDEV_CHANGE): veth96c385b: link becomes ready [ 13.063094] br-6bff5628a2a1: port 2(veth96c385b) entered blocking state [ 13.063100] br-6bff5628a2a1: port 2(veth96c385b) entered forwarding state [ 21.436646] fuse init (API version 7.26) [ 22.867516] tegradc tegradc.0: blank - powerdown [ 23.402041] tegradc tegradc.0: blank - normal [ 24.957514] tegradc tegradc.0: unblank [ 24.957528] tegradc tegradc.0: update windows ret = -14 [ 24.957531] tegradc tegradc.0: sync windows ret = -14 [ 31.706139] tegradc tegradc.0: unblank [ 33.914739] vdd-fan: disabling [ 33.914760] vdd-usb-vbus: disabling [ 33.914776] vdd-usb-vbus2: disabling [ 340.665699] tegradc tegradc.0: unblank [ 340.665714] tegradc tegradc.0: blank - normal [ 340.665735] tegradc tegradc.0: blank - powerdown [ 533.081580] systemd[1]: systemd 245.4-4ubuntu3.22 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 533.082508] systemd[1]: Detected architecture arm64. [ 1823.729902] systemd-journald[1960]: Received SIGTERM from PID 1 (systemd). [ 1823.730320] systemd[1]: Stopping Journal Service... [ 1823.735179] systemd[1]: systemd-journald.service: Succeeded. [ 1823.737036] systemd[1]: Stopped Journal Service. [ 1823.743807] systemd[1]: Starting Journal Service... [ 1823.745175] systemd[1]: resolvconf-pull-resolved.service: Succeeded. [ 1823.746933] systemd[1]: Finished resolvconf-pull-resolved.service. [ 1823.836636] systemd[1]: Started Journal Service. [ 1854.711318] squashfs: SQUASHFS error: Filesystem uses "lzo" compression. This is not supported [ 1858.555786] squashfs: SQUASHFS error: Filesystem uses "lzo" compression. This is not supported [ 1872.015171] squashfs: SQUASHFS error: Filesystem uses "lzo" compression. This is not supported