[ 0.000000] microcode: microcode updated early to revision 0x2f, date = 2019-02-17 [ 0.000000] Linux version 5.4.0-56-generic (buildd@lgw01-amd64-025) (gcc version 9.3.0 (Ubuntu 9.3.0-17ubuntu1~20.04)) #62-Ubuntu SMP Mon Nov 23 19:20:19 UTC 2020 (Ubuntu 5.4.0-56.62-generic 5.4.73) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-5.4.0-56-generic root=UUID=0b594688-26a8-4655-b6d5-d81b4b29c0e2 ro [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Hygon HygonGenuine [ 0.000000] Centaur CentaurHauls [ 0.000000] zhaoxin Shanghai [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf353fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bf354000-0x00000000bf3a8fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bf3a9000-0x00000000bf607fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bf608000-0x00000000bf608fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bf609000-0x00000000bf609fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bf60a000-0x00000000bf613fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bf614000-0x00000000bf638fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bf639000-0x00000000bf67bfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bf67c000-0x00000000bf7fffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023f7fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./H67M, BIOS P1.40 02/18/2011 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3392.371 MHz processor [ 0.001783] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.001784] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.001788] last_pfn = 0x23f800 max_arch_pfn = 0x400000000 [ 0.001792] MTRR default type: uncachable [ 0.001792] MTRR fixed ranges enabled: [ 0.001793] 00000-9FFFF write-back [ 0.001794] A0000-BFFFF uncachable [ 0.001794] C0000-CFFFF write-protect [ 0.001795] D0000-E7FFF uncachable [ 0.001796] E8000-FFFFF write-protect [ 0.001796] MTRR variable ranges enabled: [ 0.001797] 0 base 000000000 mask E00000000 write-back [ 0.001798] 1 base 200000000 mask FC0000000 write-back [ 0.001799] 2 base 0C0000000 mask FC0000000 uncachable [ 0.001799] 3 base 23F800000 mask FFF800000 uncachable [ 0.001800] 4 disabled [ 0.001800] 5 disabled [ 0.001800] 6 disabled [ 0.001801] 7 disabled [ 0.001801] 8 disabled [ 0.001801] 9 disabled [ 0.002657] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.003064] total RAM covered: 8184M [ 0.003417] Found optimal setting for mtrr clean up [ 0.003418] gran_size: 64K chunk_size: 16M num_reg: 5 lose cover RAM: 0G [ 0.004210] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved [ 0.004213] last_pfn = 0xbf800 max_arch_pfn = 0x400000000 [ 0.011744] found SMP MP-table at [mem 0x000fcf20-0x000fcf2f] [ 0.038547] check: Scanning 1 areas for low memory corruption [ 0.038884] RAMDISK: [mem 0x32083000-0x35038fff] [ 0.038892] ACPI: Early table checksum verification disabled [ 0.038895] ACPI: RSDP 0x00000000000F0450 000024 (v02 ALASKA) [ 0.038898] ACPI: XSDT 0x00000000BF3A1068 000054 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.038903] ACPI: FACP 0x00000000BF3A8778 0000F4 (v04 ALASKA A M I 01072009 AMI 00010013) [ 0.038907] ACPI: DSDT 0x00000000BF3A1150 007622 (v02 ALASKA A M I 00000000 INTL 20051117) [ 0.038910] ACPI: FACS 0x00000000BF60BF80 000040 [ 0.038912] ACPI: APIC 0x00000000BF3A8870 000092 (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.038915] ACPI: SSDT 0x00000000BF3A8908 0001D6 (v01 AMICPU PROC 00000001 MSFT 03000001) [ 0.038917] ACPI: MCFG 0x00000000BF3A8AE0 00003C (v01 ALASKA A M I 01072009 MSFT 00000097) [ 0.038920] ACPI: AAFT 0x00000000BF3A8B20 0000BA (v01 ALASKA OEMAAFT 01072009 MSFT 00000097) [ 0.038922] ACPI: HPET 0x00000000BF3A8BE0 000038 (v01 ALASKA A M I 01072009 AMI. 00000004) [ 0.038930] ACPI: Local APIC address 0xfee00000 [ 0.039015] No NUMA configuration found [ 0.039016] Faking a node at [mem 0x0000000000000000-0x000000023f7fffff] [ 0.039024] NODE_DATA(0) allocated [mem 0x23f7d1000-0x23f7fbfff] [ 0.039240] Zone ranges: [ 0.039241] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.039242] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.039243] Normal [mem 0x0000000100000000-0x000000023f7fffff] [ 0.039244] Device empty [ 0.039244] Movable zone start for each node [ 0.039247] Early memory node ranges [ 0.039248] node 0: [mem 0x0000000000001000-0x000000000009cfff] [ 0.039249] node 0: [mem 0x0000000000100000-0x00000000bf353fff] [ 0.039250] node 0: [mem 0x00000000bf608000-0x00000000bf608fff] [ 0.039251] node 0: [mem 0x00000000bf67c000-0x00000000bf7fffff] [ 0.039251] node 0: [mem 0x0000000100000000-0x000000023f7fffff] [ 0.039292] Zeroed struct page in unavailable ranges: 5003 pages [ 0.039293] Initmem setup node 0 [mem 0x0000000000001000-0x000000023f7fffff] [ 0.039295] On node 0 totalpages: 2092149 [ 0.039296] DMA zone: 64 pages used for memmap [ 0.039296] DMA zone: 21 pages reserved [ 0.039297] DMA zone: 3996 pages, LIFO batch:0 [ 0.039338] DMA32 zone: 12180 pages used for memmap [ 0.039339] DMA32 zone: 779481 pages, LIFO batch:63 [ 0.047906] Normal zone: 20448 pages used for memmap [ 0.047907] Normal zone: 1308672 pages, LIFO batch:63 [ 0.060929] ACPI: PM-Timer IO Port: 0x408 [ 0.060932] ACPI: Local APIC address 0xfee00000 [ 0.060939] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.060949] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.060951] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.060952] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.060954] ACPI: IRQ0 used by override. [ 0.060954] ACPI: IRQ9 used by override. [ 0.060956] Using ACPI (MADT) for SMP configuration information [ 0.060957] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.060961] TSC deadline timer available [ 0.060963] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.060976] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.060977] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.060978] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.060979] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.060979] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.060981] PM: Registered nosave memory: [mem 0xbf354000-0xbf3a8fff] [ 0.060981] PM: Registered nosave memory: [mem 0xbf3a9000-0xbf607fff] [ 0.060983] PM: Registered nosave memory: [mem 0xbf609000-0xbf609fff] [ 0.060983] PM: Registered nosave memory: [mem 0xbf60a000-0xbf613fff] [ 0.060984] PM: Registered nosave memory: [mem 0xbf614000-0xbf638fff] [ 0.060985] PM: Registered nosave memory: [mem 0xbf639000-0xbf67bfff] [ 0.060986] PM: Registered nosave memory: [mem 0xbf800000-0xfed1bfff] [ 0.060986] PM: Registered nosave memory: [mem 0xfed1c000-0xfed3ffff] [ 0.060987] PM: Registered nosave memory: [mem 0xfed40000-0xfeffffff] [ 0.060988] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.060989] [mem 0xbf800000-0xfed1bfff] available for PCI devices [ 0.060990] Booting paravirtualized kernel on bare hardware [ 0.060993] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.060998] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.061184] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u262144 [ 0.061189] pcpu-alloc: s184320 r8192 d28672 u262144 alloc=1*2097152 [ 0.061189] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.061212] Built 1 zonelists, mobility grouping on. Total pages: 2059436 [ 0.061213] Policy zone: Normal [ 0.061214] Kernel command line: BOOT_IMAGE=/vmlinuz-5.4.0-56-generic root=UUID=0b594688-26a8-4655-b6d5-d81b4b29c0e2 ro [ 0.061664] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.061871] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.061941] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.065227] Calgary: detecting Calgary via BIOS EBDA area [ 0.065229] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.084895] Memory: 8075584K/8368596K available (14339K kernel code, 2426K rwdata, 4932K rodata, 2720K init, 4956K bss, 293012K reserved, 0K cma-reserved) [ 0.084902] random: get_random_u64 called from kmem_cache_open+0x2d/0x410 with crng_init=0 [ 0.085012] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.085023] Kernel/User page tables isolation: enabled [ 0.085037] ftrace: allocating 44542 entries in 174 pages [ 0.098377] rcu: Hierarchical RCU implementation. [ 0.098379] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.098380] Tasks RCU enabled. [ 0.098381] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.098382] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.100841] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16 [ 0.101065] Console: colour dummy device 80x25 [ 0.101197] printk: console [tty0] enabled [ 0.101210] ACPI: Core revision 20190816 [ 0.101274] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.101289] APIC: Switch to symmetric I/O mode setup [ 0.101693] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.121289] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x30e6284d516, max_idle_ns: 440795368132 ns [ 0.121294] Calibrating delay loop (skipped), value calculated using timer frequency.. 6784.74 BogoMIPS (lpj=13569484) [ 0.121297] pid_max: default: 32768 minimum: 301 [ 0.121321] LSM: Security Framework initializing [ 0.121330] Yama: becoming mindful. [ 0.121362] AppArmor: AppArmor initialized [ 0.121401] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.121415] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.121428] *** VALIDATE tmpfs *** [ 0.121545] *** VALIDATE proc *** [ 0.121589] *** VALIDATE cgroup1 *** [ 0.121592] *** VALIDATE cgroup2 *** [ 0.121630] mce: CPU0: Thermal monitoring enabled (TM1) [ 0.121642] process: using mwait in idle threads [ 0.121645] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 0.121647] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.121650] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.121652] Spectre V2 : Mitigation: Full generic retpoline [ 0.121654] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.121656] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.121658] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.121660] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl [ 0.121662] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.121666] MDS: Mitigation: Clear CPU buffers [ 0.121784] Freeing SMP alternatives memory: 40K [ 0.125358] smpboot: CPU0: Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz (family: 0x6, model: 0x2a, stepping: 0x7) [ 0.125437] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.125444] ... version: 3 [ 0.125445] ... bit width: 48 [ 0.125447] ... generic registers: 4 [ 0.125448] ... value mask: 0000ffffffffffff [ 0.125450] ... max period: 00007fffffffffff [ 0.125451] ... fixed-purpose events: 3 [ 0.125453] ... event mask: 000000070000000f [ 0.125481] rcu: Hierarchical SRCU implementation. [ 0.126238] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.126304] smp: Bringing up secondary CPUs ... [ 0.126382] x86: Booting SMP configuration: [ 0.126384] .... node #0, CPUs: #1 #2 #3 #4 [ 0.137370] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.137423] #5 #6 #7 [ 0.143720] smp: Brought up 1 node, 8 CPUs [ 0.143720] smpboot: Max logical packages: 1 [ 0.143720] smpboot: Total of 8 processors activated (54277.93 BogoMIPS) [ 0.145591] devtmpfs: initialized [ 0.145591] x86/mm: Memory block size: 128MB [ 0.145933] PM: Registering ACPI NVS region [mem 0xbf354000-0xbf3a8fff] (348160 bytes) [ 0.145933] PM: Registering ACPI NVS region [mem 0xbf60a000-0xbf613fff] (40960 bytes) [ 0.145933] PM: Registering ACPI NVS region [mem 0xbf639000-0xbf67bfff] (274432 bytes) [ 0.145933] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.145933] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.145933] pinctrl core: initialized pinctrl subsystem [ 0.145933] PM: RTC time: 17:07:16, date: 2020-12-03 [ 0.145933] NET: Registered protocol family 16 [ 0.145933] audit: initializing netlink subsys (disabled) [ 0.145933] audit: type=2000 audit(1607015236.044:1): state=initialized audit_enabled=0 res=1 [ 0.145933] EISA bus registered [ 0.145933] cpuidle: using governor ladder [ 0.145933] cpuidle: using governor menu [ 0.145933] ACPI: bus type PCI registered [ 0.145933] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.145933] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.145933] PCI: not using MMCONFIG [ 0.145933] PCI: Using configuration type 1 for base access [ 0.145933] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.145933] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.146281] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.149345] fbcon: Taking over console [ 0.149365] ACPI: Added _OSI(Module Device) [ 0.149367] ACPI: Added _OSI(Processor Device) [ 0.149369] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.149370] ACPI: Added _OSI(Processor Aggregator Device) [ 0.149372] ACPI: Added _OSI(Linux-Dell-Video) [ 0.149374] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.149376] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.154439] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.155467] ACPI: Dynamic OEM Table Load: [ 0.155473] ACPI: SSDT 0xFFFF9027B598C800 0006F4 (v01 AMI IST 00000001 MSFT 03000001) [ 0.156104] ACPI: Dynamic OEM Table Load: [ 0.156108] ACPI: SSDT 0xFFFF9027B5655000 0000E4 (v01 AMI CST 00000001 MSFT 03000001) [ 0.157752] ACPI: Interpreter enabled [ 0.157769] ACPI: (supports S0 S1 S3 S4 S5) [ 0.157771] ACPI: Using IOAPIC for interrupt routing [ 0.157797] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.157876] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.157889] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.158162] ACPI: Enabled 8 GPEs in block 00 to 3F [ 0.158442] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.164973] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.164980] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.165165] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug LTR] [ 0.165343] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability] [ 0.165479] acpi PNP0A08:00: ignoring host bridge window [mem 0x000c8000-0x000dffff window] (conflicts with Video ROM [mem 0x000c0000-0x000ce7ff]) [ 0.165650] PCI host bridge to bus 0000:00 [ 0.165653] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.165655] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.165657] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.165660] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff window] [ 0.165663] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.165671] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000 [ 0.165751] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400 [ 0.165783] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.165902] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000 [ 0.165937] pci 0000:00:16.0: reg 0x10: [mem 0xf9308000-0xf930800f 64bit] [ 0.166039] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.166136] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 [ 0.166167] pci 0000:00:1a.0: reg 0x10: [mem 0xf9307000-0xf93073ff] [ 0.166285] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.166382] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300 [ 0.166414] pci 0000:00:1b.0: reg 0x10: [mem 0xf9300000-0xf9303fff 64bit] [ 0.166525] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.166605] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 [ 0.166739] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.166843] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400 [ 0.166978] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.167080] pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400 [ 0.167215] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.167317] pci 0000:00:1c.3: [8086:244e] type 01 class 0x060401 [ 0.167453] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.167554] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400 [ 0.167690] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.167795] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 [ 0.167825] pci 0000:00:1d.0: reg 0x10: [mem 0xf9306000-0xf93063ff] [ 0.167944] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.168039] pci 0000:00:1f.0: [8086:1c4a] type 00 class 0x060100 [ 0.168262] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601 [ 0.168291] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077] [ 0.168302] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063] [ 0.168314] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057] [ 0.168325] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043] [ 0.168336] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f] [ 0.168347] pci 0000:00:1f.2: reg 0x24: [mem 0xf9305000-0xf93057ff] [ 0.168410] pci 0000:00:1f.2: PME# supported from D3hot [ 0.168496] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 [ 0.168524] pci 0000:00:1f.3: reg 0x10: [mem 0xf9304000-0xf93040ff 64bit] [ 0.168554] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f] [ 0.168676] pci 0000:01:00.0: [10de:1b06] type 00 class 0x030000 [ 0.168695] pci 0000:01:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff] [ 0.168705] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.168715] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref] [ 0.168723] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f] [ 0.168730] pci 0000:01:00.0: reg 0x30: [mem 0xfb000000-0xfb07ffff pref] [ 0.168736] pci 0000:01:00.0: enabling Extended Tags [ 0.168803] pci 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x16 link at 0000:00:01.0 (capable of 126.016 Gb/s with 8 GT/s x16 link) [ 0.168837] pci 0000:01:00.1: [10de:10ef] type 00 class 0x040300 [ 0.168851] pci 0000:01:00.1: reg 0x10: [mem 0xfb080000-0xfb083fff] [ 0.168887] pci 0000:01:00.1: enabling Extended Tags [ 0.168981] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.168984] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.168987] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.168990] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref] [ 0.169040] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.169124] pci 0000:03:00.0: [1102:000b] type 00 class 0x040300 [ 0.169179] pci 0000:03:00.0: reg 0x10: [mem 0xf9200000-0xf920ffff 64bit] [ 0.169207] pci 0000:03:00.0: reg 0x18: [mem 0xf9000000-0xf91fffff 64bit] [ 0.169236] pci 0000:03:00.0: reg 0x20: [mem 0xf8000000-0xf8ffffff 64bit] [ 0.181328] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.181340] pci 0000:00:1c.1: bridge window [mem 0xf8000000-0xf92fffff] [ 0.181429] pci 0000:04:00.0: [1b6f:7023] type 00 class 0x0c0330 [ 0.181477] pci 0000:04:00.0: reg 0x10: [mem 0xfb200000-0xfb207fff 64bit] [ 0.181569] pci 0000:04:00.0: enabling Extended Tags [ 0.181663] pci 0000:04:00.0: supports D1 D2 [ 0.181665] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.181774] pci 0000:00:1c.2: PCI bridge to [bus 04] [ 0.181782] pci 0000:00:1c.2: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.181862] pci 0000:05:00.0: [1b21:1080] type 01 class 0x060401 [ 0.182074] pci 0000:00:1c.3: PCI bridge to [bus 05-06] (subtractive decode) [ 0.182089] pci 0000:00:1c.3: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.182092] pci 0000:00:1c.3: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.182094] pci 0000:00:1c.3: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.182097] pci 0000:00:1c.3: bridge window [mem 0xc0000000-0xffffffff window] (subtractive decode) [ 0.182137] pci_bus 0000:06: extended config space not accessible [ 0.182236] pci 0000:05:00.0: PCI bridge to [bus 06] (subtractive decode) [ 0.182263] pci 0000:05:00.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.182265] pci 0000:05:00.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.182268] pci 0000:05:00.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.182271] pci 0000:05:00.0: bridge window [mem 0xc0000000-0xffffffff window] (subtractive decode) [ 0.182354] pci 0000:07:00.0: [10ec:8168] type 00 class 0x020000 [ 0.182397] pci 0000:07:00.0: reg 0x10: [io 0xd000-0xd0ff] [ 0.182440] pci 0000:07:00.0: reg 0x18: [mem 0xd2104000-0xd2104fff 64bit pref] [ 0.182468] pci 0000:07:00.0: reg 0x20: [mem 0xd2100000-0xd2103fff 64bit pref] [ 0.182614] pci 0000:07:00.0: supports D1 D2 [ 0.182616] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.182755] pci 0000:00:1c.4: PCI bridge to [bus 07] [ 0.182760] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff] [ 0.182771] pci 0000:00:1c.4: bridge window [mem 0xd2100000-0xd21fffff 64bit pref] [ 0.183621] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.183681] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.183739] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15) [ 0.183798] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15) [ 0.183856] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0 [ 0.183915] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0 [ 0.183974] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.184032] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.184153] iommu: Default domain type: Translated [ 0.184153] SCSI subsystem initialized [ 0.184153] libata version 3.00 loaded. [ 0.184153] pci 0000:01:00.0: vgaarb: setting as boot VGA device [ 0.184153] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.184153] pci 0000:01:00.0: vgaarb: bridge control possible [ 0.184153] vgaarb: loaded [ 0.184153] ACPI: bus type USB registered [ 0.184153] usbcore: registered new interface driver usbfs [ 0.184153] usbcore: registered new interface driver hub [ 0.184153] usbcore: registered new device driver usb [ 0.184153] pps_core: LinuxPPS API ver. 1 registered [ 0.184153] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.184153] PTP clock support registered [ 0.184153] EDAC MC: Ver: 3.0.0 [ 0.184153] PCI: Using ACPI for IRQ routing [ 0.194759] PCI: pci_cache_line_size set to 64 bytes [ 0.194824] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 0.194825] e820: reserve RAM buffer [mem 0xbf354000-0xbfffffff] [ 0.194825] e820: reserve RAM buffer [mem 0xbf609000-0xbfffffff] [ 0.194826] e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff] [ 0.194827] e820: reserve RAM buffer [mem 0x23f800000-0x23fffffff] [ 0.194905] NetLabel: Initializing [ 0.194907] NetLabel: domain hash size = 128 [ 0.194908] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.194922] NetLabel: unlabeled traffic allowed by default [ 0.194934] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.194934] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.197319] clocksource: Switched to clocksource tsc-early [ 0.207372] *** VALIDATE bpf *** [ 0.207445] VFS: Disk quotas dquot_6.6.0 [ 0.207461] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.207484] *** VALIDATE ramfs *** [ 0.207488] *** VALIDATE hugetlbfs *** [ 0.207559] AppArmor: AppArmor Filesystem Enabled [ 0.207583] pnp: PnP ACPI init [ 0.207748] system 00:00: [mem 0xfed10000-0xfed19fff] has been reserved [ 0.207752] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved [ 0.207754] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.207756] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.207758] system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved [ 0.207764] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.207852] system 00:01: [io 0x0290-0x029f] has been reserved [ 0.207857] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.208143] pnp 00:02: [dma 2] [ 0.208176] pnp 00:02: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.208514] pnp 00:03: [dma 3] [ 0.208618] pnp 00:03: Plug and Play ACPI device, IDs PNP0401 (active) [ 0.208816] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.208857] system 00:05: [io 0x04d0-0x04d1] has been reserved [ 0.208862] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.209114] pnp 00:06: [dma 0 disabled] [ 0.209148] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.209376] system 00:07: [io 0x0400-0x0453] has been reserved [ 0.209379] system 00:07: [io 0x0458-0x047f] has been reserved [ 0.209381] system 00:07: [io 0x1180-0x119f] has been reserved [ 0.209383] system 00:07: [io 0x0500-0x057f] has been reserved [ 0.209386] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.209388] system 00:07: [mem 0xfec00000-0xfecfffff] could not be reserved [ 0.209391] system 00:07: [mem 0xfed08000-0xfed08fff] has been reserved [ 0.209393] system 00:07: [mem 0xff000000-0xffffffff] has been reserved [ 0.209398] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.209458] system 00:08: [io 0x0454-0x0457] has been reserved [ 0.209463] system 00:08: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.209683] pnp: PnP ACPI: found 9 devices [ 0.210699] thermal_sys: Registered thermal governor 'fair_share' [ 0.210699] thermal_sys: Registered thermal governor 'bang_bang' [ 0.210702] thermal_sys: Registered thermal governor 'step_wise' [ 0.210704] thermal_sys: Registered thermal governor 'user_space' [ 0.210705] thermal_sys: Registered thermal governor 'power_allocator' [ 0.215199] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.215235] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.215238] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.215242] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.215244] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref] [ 0.215248] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.215264] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.215271] pci 0000:00:1c.1: bridge window [mem 0xf8000000-0xf92fffff] [ 0.215281] pci 0000:00:1c.2: PCI bridge to [bus 04] [ 0.215287] pci 0000:00:1c.2: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.215298] pci 0000:05:00.0: PCI bridge to [bus 06] [ 0.215323] pci 0000:00:1c.3: PCI bridge to [bus 05-06] [ 0.215338] pci 0000:00:1c.4: PCI bridge to [bus 07] [ 0.215342] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff] [ 0.215351] pci 0000:00:1c.4: bridge window [mem 0xd2100000-0xd21fffff 64bit pref] [ 0.215360] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.215362] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.215364] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.215367] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xffffffff window] [ 0.215369] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.215371] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.215373] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref] [ 0.215375] pci_bus 0000:03: resource 1 [mem 0xf8000000-0xf92fffff] [ 0.215377] pci_bus 0000:04: resource 1 [mem 0xfb200000-0xfb2fffff] [ 0.215380] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7 window] [ 0.215382] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff window] [ 0.215384] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.215386] pci_bus 0000:05: resource 7 [mem 0xc0000000-0xffffffff window] [ 0.215388] pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7 window] [ 0.215390] pci_bus 0000:06: resource 5 [io 0x0d00-0xffff window] [ 0.215392] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.215394] pci_bus 0000:06: resource 7 [mem 0xc0000000-0xffffffff window] [ 0.215396] pci_bus 0000:07: resource 0 [io 0xd000-0xdfff] [ 0.215398] pci_bus 0000:07: resource 2 [mem 0xd2100000-0xd21fffff 64bit pref] [ 0.215472] NET: Registered protocol family 2 [ 0.215603] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.215651] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.215789] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.215867] TCP: Hash tables configured (established 65536 bind 65536) [ 0.215903] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.215928] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.215974] NET: Registered protocol family 1 [ 0.215980] NET: Registered protocol family 44 [ 0.345395] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x662 took 126367 usecs [ 0.477387] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x662 took 128877 usecs [ 0.477408] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.477419] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0 [ 0.477573] pci 0000:05:00.0: Disabling ASPM L0s/L1 [ 0.477582] PCI: CLS 64 bytes, default 64 [ 0.477621] Trying to unpack rootfs image as initramfs... [ 0.579891] Freeing initrd memory: 48856K [ 0.579910] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.579912] software IO TLB: mapped [mem 0xbb354000-0xbf354000] (64MB) [ 0.580137] check: Scanning for low memory corruption every 60 seconds [ 0.580511] Initialise system trusted keyrings [ 0.580521] Key type blacklist registered [ 0.580539] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 0.581617] zbud: loaded [ 0.581897] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.582016] fuse: init (API version 7.31) [ 0.582030] *** VALIDATE fuse *** [ 0.582032] *** VALIDATE fuse *** [ 0.582110] Platform Keyring initialized [ 0.584955] Key type asymmetric registered [ 0.584957] Asymmetric key parser 'x509' registered [ 0.584964] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 0.584997] io scheduler mq-deadline registered [ 0.585216] pcieport 0000:00:01.0: PME: Signaling with IRQ 24 [ 0.585371] pcieport 0000:00:1c.0: PME: Signaling with IRQ 25 [ 0.585546] pcieport 0000:00:1c.1: PME: Signaling with IRQ 26 [ 0.585674] pcieport 0000:00:1c.2: PME: Signaling with IRQ 27 [ 0.585847] pcieport 0000:00:1c.3: PME: Signaling with IRQ 28 [ 0.586016] pcieport 0000:00:1c.4: PME: Signaling with IRQ 29 [ 0.586095] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.586137] vesafb: mode is 640x480x32, linelength=2560, pages=0 [ 0.586138] vesafb: scrolling: redraw [ 0.586140] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.586148] vesafb: framebuffer at 0xd1000000, mapped to 0x(____ptrval____), using 1216k, total 1216k [ 0.586212] Console: switching to colour frame buffer device 80x30 [ 0.598773] fb0: VESA VGA frame buffer device [ 0.599037] intel_idle: MWAIT substates: 0x1120 [ 0.599038] intel_idle: v0.4.1 model 0x2A [ 0.599256] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.599333] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.599851] ACPI: Power Button [PWRB] [ 0.600092] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.613605] ACPI: Power Button [PWRF] [ 0.621552] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.648950] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.664568] Linux agpgart interface v0.103 [ 0.673932] loop: module loaded [ 0.681349] libphy: Fixed MDIO Bus: probed [ 0.688609] tun: Universal TUN/TAP device driver, 1.6 [ 0.695879] PPP generic driver version 2.4.2 [ 0.703027] VFIO - User Level meta-driver version: 0.3 [ 0.710239] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.717473] ehci-pci: EHCI PCI platform driver [ 0.724903] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.732471] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.748121] ehci-pci 0000:00:1a.0: debug port 2 [ 0.760240] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 0.768467] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf9307000 [ 0.789327] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.789381] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 0.813528] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.829643] usb usb1: Product: EHCI Host Controller [ 0.837729] usb usb1: Manufacturer: Linux 5.4.0-56-generic ehci_hcd [ 0.845798] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.853752] hub 1-0:1.0: USB hub found [ 0.861533] hub 1-0:1.0: 2 ports detected [ 0.869235] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.876695] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.891576] ehci-pci 0000:00:1d.0: debug port 2 [ 0.902874] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 0.910271] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf9306000 [ 0.933320] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.940689] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 0.955629] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.971039] usb usb2: Product: EHCI Host Controller [ 0.978801] usb usb2: Manufacturer: Linux 5.4.0-56-generic ehci_hcd [ 0.986613] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.994497] hub 2-0:1.0: USB hub found [ 1.002190] hub 2-0:1.0: 2 ports detected [ 1.009748] ehci-platform: EHCI generic platform driver [ 1.017300] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.024983] ohci-pci: OHCI PCI platform driver [ 1.032624] ohci-platform: OHCI generic platform driver [ 1.040368] uhci_hcd: USB Universal Host Controller Interface driver [ 1.048197] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 1.055789] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3 [ 1.070581] xhci_hcd 0000:04:00.0: hcc params 0x040050af hci version 0x100 quirks 0x0000000000080490 [ 1.085913] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 1.101580] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.117987] usb usb3: Product: xHCI Host Controller [ 1.126339] usb usb3: Manufacturer: Linux 5.4.0-56-generic xhci-hcd [ 1.134669] usb usb3: SerialNumber: 0000:04:00.0 [ 1.143039] hub 3-0:1.0: USB hub found [ 1.151251] hub 3-0:1.0: 2 ports detected [ 1.159470] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 1.167752] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4 [ 1.183863] xhci_hcd 0000:04:00.0: Host supports USB 3.0 SuperSpeed [ 1.192024] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.201310] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.208175] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04 [ 1.233342] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.250846] usb usb4: Product: xHCI Host Controller [ 1.259690] usb usb4: Manufacturer: Linux 5.4.0-56-generic xhci-hcd [ 1.268600] usb usb4: SerialNumber: 0000:04:00.0 [ 1.277556] hub 4-0:1.0: USB hub found [ 1.286262] hub 4-0:1.0: 2 ports detected [ 1.294917] i8042: PNP: No PS/2 controller found. [ 1.303644] mousedev: PS/2 mouse device common for all mice [ 1.312383] rtc_cmos 00:04: RTC can wake from S4 [ 1.320968] rtc_cmos 00:04: registered as rtc0 [ 1.329129] rtc_cmos 00:04: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.345109] i2c /dev entries driver [ 1.349310] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.352907] device-mapper: uevent: version 1.0.3 [ 1.361334] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 1.368842] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com [ 1.384794] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.385104] hub 1-1:1.0: USB hub found [ 1.401566] tsc: Refined TSC clocksource calibration: 3392.295 MHz [ 1.401571] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x30e5dfea93c, max_idle_ns: 440795225583 ns [ 1.401611] platform eisa.0: Probing EISA bus 0 [ 1.401613] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 1.401614] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 1.401615] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 1.401615] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 1.401616] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 1.401617] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 1.401618] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 1.401618] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 1.401619] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 1.401620] platform eisa.0: EISA: Detected 0 cards [ 1.401624] intel_pstate: Intel P-state driver initializing [ 1.410579] hub 1-1:1.0: 6 ports detected [ 1.540416] clocksource: Switched to clocksource tsc [ 1.547134] ledtrig-cpu: registered to indicate activity on CPUs [ 1.553789] drop_monitor: Initializing network drop monitor service [ 1.560449] NET: Registered protocol family 10 [ 1.571869] Segment Routing with IPv6 [ 1.578274] NET: Registered protocol family 17 [ 1.584589] Key type dns_resolver registered [ 1.591418] RAS: Correctable Errors collector initialized. [ 1.597633] microcode: sig=0x206a7, pf=0x2, revision=0x2f [ 1.601319] usb 3-1: new high-speed USB device number 2 using xhci_hcd [ 1.610064] microcode: Microcode Update Driver: v2.2. [ 1.610067] IPI shorthand broadcast: enabled [ 1.621641] sched_clock: Marking stable (1621368477, 267209)->(1630917216, -9281530) [ 1.633078] registered taskstats version 1 [ 1.633701] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 1.638900] Loading compiled-in X.509 certificates [ 1.650401] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.657087] Loaded X.509 cert 'Build time autogenerated kernel key: 094e0f64537699c38eac1422da4dd7fa08baa936' [ 1.662837] hub 2-1:1.0: USB hub found [ 1.675411] zswap: loaded using pool lzo/zbud [ 1.682307] hub 2-1:1.0: 8 ports detected [ 1.696368] Key type ._fscrypt registered [ 1.703628] Key type .fscrypt registered [ 1.715798] Key type big_key registered [ 1.725185] Key type encrypted registered [ 1.732247] AppArmor: AppArmor sha1 policy hashing enabled [ 1.739306] ima: No TPM chip found, activating TPM-bypass! [ 1.746392] ima: Allocated hash algorithm: sha1 [ 1.753385] ima: No architecture policies found [ 1.760251] evm: Initialising EVM extended attributes: [ 1.767131] evm: security.selinux [ 1.773920] evm: security.SMACK64 [ 1.773992] usb 3-1: New USB device found, idVendor=0000, idProduct=0000, bcdDevice= 1.00 [ 1.780583] evm: security.SMACK64EXEC [ 1.780584] evm: security.SMACK64TRANSMUTE [ 1.794347] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.801352] evm: security.SMACK64MMAP [ 1.801353] evm: security.apparmor [ 1.801353] evm: security.ima [ 1.808303] usb 3-1: Product: Flash Disk [ 1.815431] evm: security.capability [ 1.815432] evm: HMAC attrs: 0x1 [ 1.822263] usb 3-1: Manufacturer: USB2.0 [ 1.829105] PM: Magic number: 0:131:137 [ 1.835101] usb 3-1: SerialNumber: 90CB0400ECBA1117 [ 1.841275] usb usb4-port2: hash matches [ 1.873317] usb 1-1.2: new high-speed USB device number 3 using ehci-pci [ 1.880984] rtc_cmos 00:04: setting system clock to 2020-12-03T17:07:18 UTC (1607015238) [ 1.893176] Freeing unused decrypted memory: 2040K [ 1.899458] Freeing unused kernel image memory: 2720K [ 1.917376] Write protecting the kernel read-only data: 22528k [ 1.923819] Freeing unused kernel image memory: 2008K [ 1.930291] Freeing unused kernel image memory: 1212K [ 1.943882] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.949810] x86/mm: Checking user space page tables [ 1.963090] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.969059] Run /init as init process [ 1.993305] usb 2-1.5: new full-speed USB device number 3 using ehci-pci [ 2.061733] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\GPR2) (20190816/utaddress-204) [ 2.075678] FDC 0 is a post-1991 82077 [ 2.082014] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 2.103713] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\GPR2) (20190816/utaddress-204) [ 2.117570] usb 2-1.5: New USB device found, idVendor=046d, idProduct=c068, bcdDevice=58.02 [ 2.126834] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 2.126989] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 2.143085] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.160331] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\GPR2) (20190816/utaddress-204) [ 2.168898] usb 2-1.5: Product: G500 [ 2.186090] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 2.186165] usb-storage 3-1:1.0: USB Mass Storage device detected [ 2.186290] scsi host0: usb-storage 3-1:1.0 [ 2.186374] usbcore: registered new interface driver usb-storage [ 2.195771] usb 1-1.2: New USB device found, idVendor=046d, idProduct=082c, bcdDevice= 0.11 [ 2.195773] usb 1-1.2: New USB device strings: Mfr=0, Product=2, SerialNumber=1 [ 2.195774] usb 1-1.2: Product: HD Webcam C615 [ 2.195775] usb 1-1.2: SerialNumber: 27A1DFD0 [ 2.212841] usb 2-1.5: Manufacturer: Logitech [ 2.212843] usb 2-1.5: SerialNumber: F8526D991C0018 [ 2.221874] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 2.271082] libphy: r8169: probed [ 2.325309] usb 2-1.6: new full-speed USB device number 4 using ehci-pci [ 2.326442] r8169 0000:07:00.0 eth0: RTL8168e/8111e, 00:25:22:9f:eb:08, XID 2c2, IRQ 31 [ 2.386282] r8169 0000:07:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 2.417824] ahci 0000:00:1f.2: version 3.0 [ 2.417860] usbcore: registered new interface driver uas [ 2.418571] r8169 0000:07:00.0 enp7s0: renamed from eth0 [ 2.428113] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 2.452562] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst [ 2.479198] usb 2-1.6: New USB device found, idVendor=1532, idProduct=010b, bcdDevice= 0.03 [ 2.495810] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.512805] usb 2-1.6: Product: Razer Arctosa [ 2.521094] usb 2-1.6: Manufacturer: Razer [ 2.529855] scsi host1: ahci [ 2.538576] scsi host2: ahci [ 2.546938] scsi host3: ahci [ 2.555030] hidraw: raw HID events driver (C) Jiri Kosina [ 2.555387] scsi host4: ahci [ 2.570469] scsi host5: ahci [ 2.578096] scsi host6: ahci [ 2.585330] ata1: SATA max UDMA/133 abar m2048@0xf9305000 port 0xf9305100 irq 32 [ 2.586139] usbcore: registered new interface driver usbhid [ 2.600003] ata2: SATA max UDMA/133 abar m2048@0xf9305000 port 0xf9305180 irq 32 [ 2.607722] usbhid: USB HID core driver [ 2.629868] ata3: SATA max UDMA/133 abar m2048@0xf9305000 port 0xf9305200 irq 32 [ 2.644474] ata4: SATA max UDMA/133 abar m2048@0xf9305000 port 0xf9305280 irq 32 [ 2.659079] ata5: SATA max UDMA/133 abar m2048@0xf9305000 port 0xf9305300 irq 32 [ 2.673925] ata6: SATA max UDMA/133 abar m2048@0xf9305000 port 0xf9305380 irq 32 [ 2.703635] input: Logitech G500 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/0003:046D:C068.0001/input/input2 [ 2.719737] hid-generic 0003:046D:C068.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech G500] on usb-0000:00:1d.0-1.5/input0 [ 2.735458] input: Logitech G500 Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.1/0003:046D:C068.0002/input/input3 [ 2.809519] input: Logitech G500 Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.1/0003:046D:C068.0002/input/input4 [ 2.826377] hid-generic 0003:046D:C068.0002: input,hiddev0,hidraw1: USB HID v1.11 Keyboard [Logitech G500] on usb-0000:00:1d.0-1.5/input1 [ 2.843853] input: Razer Razer Arctosa as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/0003:1532:010B.0003/input/input7 [ 2.921514] hid-generic 0003:1532:010B.0003: input,hidraw2: USB HID v1.11 Keyboard [Razer Razer Arctosa] on usb-0000:00:1d.0-1.6/input0 [ 2.940890] input: Razer Razer Arctosa Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.1/0003:1532:010B.0004/input/input8 [ 3.001554] ata5: SATA link down (SStatus 0 SControl 300) [ 3.012376] ata4: SATA link down (SStatus 0 SControl 300) [ 3.017374] input: Razer Razer Arctosa System Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.1/0003:1532:010B.0004/input/input9 [ 3.022911] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.044094] hid-generic 0003:1532:010B.0004: input,hidraw3: USB HID v1.11 Device [Razer Razer Arctosa] on usb-0000:00:1d.0-1.6/input1 [ 3.054930] ata6: SATA link down (SStatus 0 SControl 300) [ 3.087042] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.097757] ata2: SATA link down (SStatus 0 SControl 300) [ 3.108402] ata1.00: ATA-8: WDC WD2002FYPS-02W3B0, 04.01G01, max UDMA/133 [ 3.118556] ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 3.128628] ata3.00: NCQ Send/Recv Log not supported [ 3.138399] ata3.00: ATA-9: Samsung SSD 840 PRO Series, DXM06B0Q, max UDMA/133 [ 3.157514] ata3.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 3.167800] ata3.00: NCQ Send/Recv Log not supported [ 3.177363] ata3.00: configured for UDMA/133 [ 3.187010] ata1.00: configured for UDMA/133 [ 3.196171] scsi 1:0:0:0: Direct-Access ATA WDC WD2002FYPS-0 1G01 PQ: 0 ANSI: 5 [ 3.203285] scsi 0:0:0:0: Direct-Access USB2.0 Flash Disk PMAP PQ: 0 ANSI: 4 [ 3.214346] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 3.214540] sd 1:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 3.214592] sd 1:0:0:0: [sda] Write Protect is off [ 3.214594] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.214620] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.232936] sd 0:0:0:0: [sdb] 1974272 512-byte logical blocks: (1.01 GB/964 MiB) [ 3.240731] sd 0:0:0:0: Attached scsi generic sg1 type 0 [ 3.240774] scsi: waiting for bus probes to complete ... [ 3.257734] sd 0:0:0:0: [sdb] Write Protect is off [ 3.265979] scsi 3:0:0:0: Direct-Access ATA Samsung SSD 840 6B0Q PQ: 0 ANSI: 5 [ 3.281925] sd 0:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 3.298086] sda: sda1 sda2 sda3 [ 3.298161] sd 3:0:0:0: Attached scsi generic sg2 type 0 [ 3.298177] ata3.00: Enabling discard_zeroes_data [ 3.298257] sd 3:0:0:0: [sdc] 500118192 512-byte logical blocks: (256 GB/238 GiB) [ 3.298270] sd 3:0:0:0: [sdc] Write Protect is off [ 3.298272] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 3.298300] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.306791] sd 0:0:0:0: [sdb] No Caching mode page found [ 3.315350] sd 1:0:0:0: [sda] Attached SCSI disk [ 3.322957] sd 0:0:0:0: [sdb] Assuming drive cache: write through [ 3.433573] ata3.00: Enabling discard_zeroes_data [ 3.437582] random: fast init done [ 3.442318] sdc: sdc1 sdc2 sdc3 < sdc5 > sdc4 [ 3.455198] sdb: sdb1 sdb2 [ 3.456906] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 3.456995] ata3.00: Enabling discard_zeroes_data [ 3.457047] sd 3:0:0:0: [sdc] Attached SCSI disk [ 3.465787] sd 0:0:0:0: [sdb] Attached SCSI removable disk [ 3.471880] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 3.501121] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 4.491933] EXT4-fs (sdc4): mounted filesystem with ordered data mode. Opts: (null) [ 4.660809] systemd[1]: Inserted module 'autofs4' [ 4.681332] systemd[1]: systemd 245.4-4ubuntu3.3 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 4.729430] systemd[1]: Detected architecture x86-64. [ 4.780496] systemd[1]: Set hostname to . [ 4.873244] systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly. [ 4.943543] systemd[1]: /lib/systemd/system/fancontrol.service:11: PIDFile= references a path below legacy directory /var/run/, updating /var/run/fancontrol.pid → /run/fancontrol.pid; please update the unit file accordingly. [ 4.990832] systemd[1]: Created slice system-modprobe.slice. [ 5.008017] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 5.025097] systemd[1]: Created slice User and Session Slice. [ 5.042025] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 5.067489] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 5.094322] systemd[1]: Reached target User and Group Name Lookups. [ 5.112861] systemd[1]: Reached target Remote File Systems. [ 5.131135] systemd[1]: Reached target Slices. [ 5.149006] systemd[1]: Listening on Syslog Socket. [ 5.166987] systemd[1]: Listening on fsck to fsckd communication Socket. [ 5.185743] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 5.204770] systemd[1]: Listening on Journal Audit Socket. [ 5.223335] systemd[1]: Listening on Journal Socket (/dev/log). [ 5.241775] systemd[1]: Listening on Journal Socket. [ 5.259699] systemd[1]: Listening on udev Control Socket. [ 5.277503] systemd[1]: Listening on udev Kernel Socket. [ 5.295691] systemd[1]: Mounting Huge Pages File System... [ 5.314023] systemd[1]: Mounting POSIX Message Queue File System... [ 5.332124] systemd[1]: Mounting Kernel Debug File System... [ 5.349889] systemd[1]: Mounting Kernel Trace File System... [ 5.368100] systemd[1]: Starting Journal Service... [ 5.386495] systemd[1]: Starting Set the console keyboard layout... [ 5.404872] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 5.432793] systemd[1]: Starting Load Kernel Module drm... [ 5.452110] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 5.469859] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 5.488525] systemd[1]: Starting Load Kernel Modules... [ 5.502758] lp: driver loaded but no devices found [ 5.506171] ppdev: user-space parallel port driver [ 5.524399] parport_pc 00:03: reported by Plug and Play ACPI [ 5.524975] systemd[1]: Starting Remount Root and Kernel File Systems... [ 5.533495] parport0: PC-style at 0x378 (0x778), irq 5, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] [ 5.535982] EXT4-fs (sdc4): re-mounted. Opts: errors=remount-ro [ 5.577869] systemd[1]: Starting udev Coldplug all Devices... [ 5.596207] systemd[1]: Starting Uncomplicated firewall... [ 5.614957] systemd[1]: Started Journal Service. [ 5.673465] lp0: using parport0 (interrupt-driven). [ 5.686002] nct6775: Found NCT6776D/F or compatible chip at 0x2e:0x290 [ 5.759366] systemd-journald[315]: Received client request to flush runtime journal. [ 5.825336] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k SSFS [ 7.065616] IPMI message handler: version 39.2 [ 7.071644] ipmi device interface [ 7.124191] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer [ 7.124193] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules [ 7.124194] RAPL PMU: hw unit of domain package 2^-16 Joules [ 7.124195] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules [ 7.133039] cryptd: max_cpu_qlen set to 1000 [ 7.186246] AVX version of gcm_enc/dec engaged. [ 7.186249] AES CTR mode by8 optimization enabled [ 7.242761] nvidia: loading out-of-tree module taints kernel. [ 7.242769] nvidia: module license 'NVIDIA' taints kernel. [ 7.242769] Disabling lock debugging due to kernel taint [ 7.262713] nvidia: module verification failed: signature and/or required key missing - tainting kernel [ 7.271678] nvidia-nvlink: Nvlink Core is being initialized, major device number 238 [ 7.273586] nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem [ 7.327729] mc: Linux media interface: v0.10 [ 7.335176] videodev: Linux video capture interface: v2.00 [ 7.352075] snd_ctxfi 0000:03:00.0: chip 20K2 model SB0880 (1102:0041) is found [ 7.352973] uvcvideo: Found UVC 1.00 device HD Webcam C615 (046d:082c) [ 7.370142] snd_hda_intel 0000:01:00.1: Disabling MSI [ 7.370147] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client [ 7.373215] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 435.21 Sun Aug 25 08:17:57 CDT 2019 [ 7.396309] input: HD Webcam C615 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.2/input/input10 [ 7.396369] usbcore: registered new interface driver uvcvideo [ 7.396369] USB Video Class driver (1.1.1) [ 7.414731] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 435.21 Sun Aug 25 08:07:52 CDT 2019 [ 7.418299] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver [ 7.418300] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 0 [ 7.422228] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC892: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line [ 7.422230] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 7.422231] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 7.422231] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 7.422232] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x1e/0x0 [ 7.422233] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 7.422234] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19 [ 7.422235] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18 [ 7.422236] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a [ 7.435242] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11 [ 7.435298] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12 [ 7.435363] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13 [ 7.435437] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14 [ 7.435502] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15 [ 7.447854] usb 1-1.2: current rate 0 is different from the runtime rate 16000 [ 7.453415] usb 1-1.2: current rate 0 is different from the runtime rate 24000 [ 7.459850] usb 1-1.2: current rate 0 is different from the runtime rate 32000 [ 7.463119] usb 1-1.2: current rate 0 is different from the runtime rate 48000 [ 7.502818] usbcore: registered new interface driver snd-usb-audio [ 7.583160] intel_rapl_common: Found RAPL domain package [ 7.583162] intel_rapl_common: Found RAPL domain core [ 7.583163] intel_rapl_common: Found RAPL domain uncore [ 7.583172] intel_rapl_common: RAPL package-0 domain package locked by BIOS [ 7.600936] nvidia-uvm: Loaded the UVM driver, major device number 235. [ 7.721494] snd_ctxfi 0000:03:00.0: Use xfi-native timer [ 7.978267] random: crng init done [ 7.978269] random: 6 urandom warning(s) missed due to ratelimiting [ 8.351172] EXT4-fs (sdc5): mounted filesystem with ordered data mode. Opts: (null) [ 8.356185] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) [ 8.433368] audit: type=1400 audit(1607015245.055:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ubuntu-printing-app" pid=950 comm="apparmor_parser" [ 8.433912] audit: type=1400 audit(1607015245.055:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="udm-extractor" pid=952 comm="apparmor_parser" [ 8.435413] audit: type=1400 audit(1607015245.055:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ippusbxd" pid=947 comm="apparmor_parser" [ 8.435502] audit: type=1400 audit(1607015245.055:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="content-hub-clipboard" pid=956 comm="apparmor_parser" [ 8.435999] audit: type=1400 audit(1607015245.055:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=948 comm="apparmor_parser" [ 8.439141] audit: type=1400 audit(1607015245.059:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=960 comm="apparmor_parser" [ 8.440659] audit: type=1400 audit(1607015245.059:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="content-hub-peer-picker" pid=959 comm="apparmor_parser" [ 8.440778] audit: type=1400 audit(1607015245.059:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=943 comm="apparmor_parser" [ 8.440782] audit: type=1400 audit(1607015245.059:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=943 comm="apparmor_parser" [ 8.440784] audit: type=1400 audit(1607015245.059:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=943 comm="apparmor_parser" [ 9.242904] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input16 [ 9.243025] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input17 [ 9.243087] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input18 [ 9.243146] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input19 [ 9.243197] input: HDA NVidia HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input20 [ 9.243245] input: HDA NVidia HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input21 [ 9.243294] input: HDA NVidia HDMI/DP,pcm=12 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input22 [ 9.683210] RTL8211DN Gigabit Ethernet r8169-700:00: attached PHY driver [RTL8211DN Gigabit Ethernet] (mii_bus:phy_addr=r8169-700:00, irq=IGNORE) [ 9.917530] r8169 0000:07:00.0 enp7s0: Link is Down [ 10.513314] usb 1-1.2: reset high-speed USB device number 3 using ehci-pci [ 11.166861] usb 1-1.2: current rate 0 is different from the runtime rate 48000 [ 11.174232] usb 1-1.2: current rate 0 is different from the runtime rate 48000 [ 11.179174] usb 1-1.2: current rate 0 is different from the runtime rate 48000 [ 12.589176] r8169 0000:07:00.0 enp7s0: Link is Up - 1Gbps/Full - flow control off [ 12.589189] IPv6: ADDRCONF(NETDEV_CHANGE): enp7s0: link becomes ready [ 13.269582] rfkill: input handler disabled [ 15.996073] vboxdrv: Found 8 processor cores [ 16.017482] vboxdrv: TSC mode is Invariant, tentative frequency 3392283915 Hz [ 16.017483] vboxdrv: Successfully loaded version 6.1.10_Ubuntu (interface 0x002d0001) [ 16.024657] VBoxNetFlt: Successfully started. [ 16.032443] VBoxNetAdp: Successfully started. [ 209.317580] rfkill: input handler enabled [ 210.435492] usb 1-1.2: current rate 0 is different from the runtime rate 48000 [ 210.443328] usb 1-1.2: current rate 0 is different from the runtime rate 48000 [ 210.449577] usb 1-1.2: current rate 0 is different from the runtime rate 48000 [ 213.848200] rfkill: input handler disabled [ 882.582669] bpfilter: Loaded bpfilter_umh pid 5473 [ 882.583168] Started bpfilter [ 2148.896119] SGI XFS with ACLs, security attributes, realtime, no debug enabled [ 2148.905717] JFS: nTxBlock = 8192, nTxLock = 65536 [ 2148.919424] ntfs: driver 2.1.32 [Flags: R/O MODULE]. [ 2148.939799] QNX4 filesystem 0.2.3 registered. [ 2148.997939] raid6: sse2x4 gen() 14598 MB/s [ 2149.045937] raid6: sse2x4 xor() 10271 MB/s [ 2149.093937] raid6: sse2x2 gen() 12842 MB/s [ 2149.141933] raid6: sse2x2 xor() 8761 MB/s [ 2149.189940] raid6: sse2x1 gen() 11038 MB/s [ 2149.237934] raid6: sse2x1 xor() 7534 MB/s [ 2149.237935] raid6: using algorithm sse2x4 gen() 14598 MB/s [ 2149.237936] raid6: .... xor() 10271 MB/s, rmw enabled [ 2149.237937] raid6: using ssse3x2 recovery algorithm [ 2149.243861] xor: automatically using best checksumming function avx [ 2149.273768] Btrfs loaded, crc32c=crc32c-intel [11765.686860] r8169 0000:07:00.0 enp7s0: Link is Down [11768.656931] r8169 0000:07:00.0 enp7s0: Link is Up - 1Gbps/Full - flow control off [24403.015693] perf: interrupt took too long (2502 > 2500), lowering kernel.perf_event_max_sample_rate to 79750 [28002.992395] usb 1-1.2: current rate 0 is different from the runtime rate 48000 [28002.997566] usb 1-1.2: current rate 0 is different from the runtime rate 48000 [28003.002652] usb 1-1.2: current rate 0 is different from the runtime rate 48000 [28004.380017] usb 1-1.2: current rate 0 is different from the runtime rate 48000 [28004.385267] usb 1-1.2: current rate 0 is different from the runtime rate 48000 [28004.390514] usb 1-1.2: current rate 0 is different from the runtime rate 48000 [28019.480522] usb 1-1.2: current rate 0 is different from the runtime rate 48000 [28026.041113] usb 1-1.2: current rate 0 is different from the runtime rate 48000 [28026.046435] usb 1-1.2: current rate 0 is different from the runtime rate 48000 [28026.051581] usb 1-1.2: current rate 0 is different from the runtime rate 48000