[ 0.000000] Linux version 4.15.0-46-generic (buildd@lgw01-amd64-008) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.10)) #49~16.04.1-Ubuntu SMP Tue Feb 12 17:45:24 UTC 2019 (Ubuntu 4.15.0-46.49~16.04.1-generic 4.15.18) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-46-generic root=UUID=139a2c4c-bdeb-4c78-a957-979b6aac6b1f ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] random: get_random_u32 called from bsp_init_amd+0x21f/0x2c0 with crng_init=0 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000da6e9fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000da6ea000-0x00000000da86dfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000da86e000-0x00000000da87dfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000da87e000-0x00000000db67bfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000db67c000-0x00000000dca38fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dca39000-0x00000000dca39fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dca3a000-0x00000000dcc3ffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000dcc40000-0x00000000dd082fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dd083000-0x00000000dd7f3fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dd7f4000-0x00000000dd7fffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000061effffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: To be filled by O.E.M. To be filled by O.E.M./M5A97 LE R2.0, BIOS 2501 04/09/2014 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] AGP: No AGP bridge found [ 0.000000] e820: last_pfn = 0x61f000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF write-through [ 0.000000] C0000-CEFFF write-protect [ 0.000000] CF000-EBFFF uncachable [ 0.000000] EC000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000C0000000 mask FFFFE0000000 write-back [ 0.000000] 3 base 0000DD800000 mask FFFFFF800000 uncachable [ 0.000000] 4 base 0000DE000000 mask FFFFFE000000 uncachable [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 000000061f000000 aka 25072M [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] total RAM covered: 3544M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 1G num_reg: 4 lose cover RAM: 0G [ 0.000000] e820: update [mem 0xdd800000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xdd800 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ (ptrval)] 98000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x50a33f000, 0x50a33ffff] PGTABLE [ 0.000000] BRK [0x50a340000, 0x50a340fff] PGTABLE [ 0.000000] BRK [0x50a341000, 0x50a341fff] PGTABLE [ 0.000000] BRK [0x50a342000, 0x50a342fff] PGTABLE [ 0.000000] BRK [0x50a343000, 0x50a343fff] PGTABLE [ 0.000000] BRK [0x50a344000, 0x50a344fff] PGTABLE [ 0.000000] BRK [0x50a345000, 0x50a345fff] PGTABLE [ 0.000000] BRK [0x50a346000, 0x50a346fff] PGTABLE [ 0.000000] BRK [0x50a347000, 0x50a347fff] PGTABLE [ 0.000000] BRK [0x50a348000, 0x50a348fff] PGTABLE [ 0.000000] BRK [0x50a349000, 0x50a349fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x30974000-0x344b1fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 0x00000000DA876070 000054 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x00000000DA87CEA8 00010C (v05 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20170831/tbfadt-658) [ 0.000000] ACPI: DSDT 0x00000000DA876158 006D50 (v02 ALASKA A M I 00000000 INTL 20051117) [ 0.000000] ACPI: FACS 0x00000000DB676F80 000040 [ 0.000000] ACPI: APIC 0x00000000DA87CFB8 00007E (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 0x00000000DA87D038 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: MCFG 0x00000000DA87D080 00003C (v01 ALASKA A M I 01072009 MSFT 00010013) [ 0.000000] ACPI: HPET 0x00000000DA87D0C0 000038 (v01 ALASKA A M I 01072009 AMI 00000005) [ 0.000000] ACPI: SSDT 0x00000000DA87D150 0006B0 (v01 AMD POWERNOW 00000001 AMD 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000061effffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x61efd3000-0x61effdfff] [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000061effffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009dfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000da6e9fff] [ 0.000000] node 0: [mem 0x00000000dca39000-0x00000000dca39fff] [ 0.000000] node 0: [mem 0x00000000dcc40000-0x00000000dd082fff] [ 0.000000] node 0: [mem 0x00000000dd7f4000-0x00000000dd7fffff] [ 0.000000] node 0: [mem 0x0000000100001000-0x000000061effffff] [ 0.000000] Reserved but unavailable: 21802 pages [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000061effffff] [ 0.000000] On node 0 totalpages: 6265558 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3997 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 13933 pages used for memmap [ 0.000000] DMA32 zone: 891706 pages, LIFO batch:31 [ 0.000000] Normal zone: 83904 pages used for memmap [ 0.000000] Normal zone: 5369855 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 5, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] IOAPIC[1]: apic_id 6, version 33, address 0xfec20000, GSI 24-55 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xda6ea000-0xda86dfff] [ 0.000000] PM: Registered nosave memory: [mem 0xda86e000-0xda87dfff] [ 0.000000] PM: Registered nosave memory: [mem 0xda87e000-0xdb67bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xdb67c000-0xdca38fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdca3a000-0xdcc3ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdd083000-0xdd7f3fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdd800000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfec1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec20000-0xfec20fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec21000-0xfecfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed60fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed61000-0xfed70fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed71000-0xfed7ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfeefffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfef00000-0xffffffff] [ 0.000000] PM: Registered nosave memory: [mem 0x100000000-0x100000fff] [ 0.000000] e820: [mem 0xdd800000-0xfebfffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u524288 [ 0.000000] pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 6167636 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-46-generic root=UUID=139a2c4c-bdeb-4c78-a957-979b6aac6b1f ro quiet splash vt.handoff=7 [ 0.000000] AGP: Checking aperture... [ 0.000000] AGP: No AGP bridge found [ 0.000000] AGP: Node 0: aperture [bus addr 0x00000000-0x01ffffff] (32MB) [ 0.000000] AGP: Your BIOS doesn't leave an aperture memory hole [ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup [ 0.000000] AGP: This costs you 64MB of RAM [ 0.000000] AGP: Mapping aperture over RAM [mem 0xd0000000-0xd3ffffff] (65536KB) [ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xd3ffffff] [ 0.000000] Memory: 24447852K/25062232K available (12300K kernel code, 2472K rwdata, 4264K rodata, 2408K init, 2416K bss, 614380K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 39204 entries in 154 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 524544, nr_irqs: 1000, preallocated irqs: 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] ACPI: Core revision 20170831 [ 0.000000] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns [ 0.000000] hpet clockevent registered [ 0.000000] APIC: Switch to symmetric I/O mode setup [ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.020000] tsc: Fast TSC calibration using PIT [ 0.024000] tsc: Detected 4117.699 MHz processor [ 0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 8235.39 BogoMIPS (lpj=16470796) [ 0.024000] pid_max: default: 32768 minimum: 301 [ 0.024000] Security Framework initialized [ 0.024000] Yama: becoming mindful. [ 0.024000] AppArmor: AppArmor initialized [ 0.034386] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes) [ 0.038676] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.038832] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.038964] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.039156] mce: CPU supports 7 MCE banks [ 0.039161] LVT offset 1 assigned for vector 0xf9 [ 0.039165] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512 [ 0.039166] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0 [ 0.039168] Spectre V2 : Mitigation: Full AMD retpoline [ 0.039168] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.039169] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier [ 0.039170] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.046143] Freeing SMP alternatives memory: 36K [ 0.052000] smpboot: CPU0: AMD FX(tm)-4130 Quad-Core Processor (family: 0x15, model: 0x1, stepping: 0x2) [ 0.052000] Performance Events: Fam15h core perfctr, AMD PMU driver. [ 0.052000] ... version: 0 [ 0.052000] ... bit width: 48 [ 0.052000] ... generic registers: 6 [ 0.052000] ... value mask: 0000ffffffffffff [ 0.052000] ... max period: 00007fffffffffff [ 0.052000] ... fixed-purpose events: 0 [ 0.052000] ... event mask: 000000000000003f [ 0.052000] Hierarchical SRCU implementation. [ 0.052000] smp: Bringing up secondary CPUs ... [ 0.052000] x86: Booting SMP configuration: [ 0.052000] .... node #0, CPUs: #1 [ 0.052000] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.052000] #2 #3 [ 0.062553] smp: Brought up 1 node, 4 CPUs [ 0.062553] smpboot: Max logical packages: 1 [ 0.062553] smpboot: Total of 4 processors activated (32941.59 BogoMIPS) [ 0.068070] devtmpfs: initialized [ 0.068070] x86/mm: Memory block size: 128MB [ 0.069996] evm: security.selinux [ 0.069997] evm: security.SMACK64 [ 0.069997] evm: security.SMACK64EXEC [ 0.069998] evm: security.SMACK64TRANSMUTE [ 0.069998] evm: security.SMACK64MMAP [ 0.069999] evm: security.apparmor [ 0.069999] evm: security.ima [ 0.070000] evm: security.capability [ 0.070019] PM: Registering ACPI NVS region [mem 0xda87e000-0xdb67bfff] (14671872 bytes) [ 0.070019] PM: Registering ACPI NVS region [mem 0xdca3a000-0xdcc3ffff] (2121728 bytes) [ 0.070019] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.070019] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.070019] pinctrl core: initialized pinctrl subsystem [ 0.070019] RTC time: 15:26:42, date: 03/18/19 [ 0.070019] NET: Registered protocol family 16 [ 0.070019] audit: initializing netlink subsys (disabled) [ 0.070019] audit: type=2000 audit(1552922802.068:1): state=initialized audit_enabled=0 res=1 [ 0.070019] cpuidle: using governor ladder [ 0.070019] cpuidle: using governor menu [ 0.070019] ACPI: bus type PCI registered [ 0.070019] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.070019] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.070019] PCI: not using MMCONFIG [ 0.070019] PCI: Using configuration type 1 for base access [ 0.070019] PCI: Using configuration type 1 for extended access [ 0.072773] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.072773] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.072773] ACPI: Added _OSI(Module Device) [ 0.072773] ACPI: Added _OSI(Processor Device) [ 0.072773] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.072773] ACPI: Added _OSI(Processor Aggregator Device) [ 0.072773] ACPI: Added _OSI(Linux-Dell-Video) [ 0.072773] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.072773] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.072773] ACPI: Executed 2 blocks of module-level executable AML code [ 0.077260] ACPI: EC: EC started [ 0.077261] ACPI: EC: interrupt blocked [ 0.077268] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as first EC [ 0.077270] ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0xa, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.077271] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as boot DSDT EC to handle transactions [ 0.077271] ACPI: Interpreter enabled [ 0.077289] ACPI: (supports S0 S3 S4 S5) [ 0.077290] ACPI: Using IOAPIC for interrupt routing [ 0.077464] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.077510] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.077514] pmd_set_huge: Cannot satisfy [mem 0xe0000000-0xe0200000] with a huge-page mapping due to MTRR override. [ 0.077870] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.078190] ACPI: Enabled 10 GPEs in block 00 to 1F [ 0.086510] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.086515] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.086520] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.086931] PCI host bridge to bus 0000:00 [ 0.086933] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 0.086934] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 0.086935] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 0.086936] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.086937] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.086938] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window] [ 0.086939] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xffffffff window] [ 0.086941] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.086952] pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000 [ 0.087096] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400 [ 0.087120] pci 0000:00:02.0: enabling Extended Tags [ 0.087148] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.087239] pci 0000:00:04.0: [1002:5a18] type 01 class 0x060400 [ 0.087262] pci 0000:00:04.0: enabling Extended Tags [ 0.087289] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 0.087379] pci 0000:00:07.0: [1002:5a1b] type 01 class 0x060400 [ 0.087403] pci 0000:00:07.0: enabling Extended Tags [ 0.087430] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 0.087529] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601 [ 0.087549] pci 0000:00:11.0: reg 0x10: [io 0xf040-0xf047] [ 0.087557] pci 0000:00:11.0: reg 0x14: [io 0xf030-0xf033] [ 0.087565] pci 0000:00:11.0: reg 0x18: [io 0xf020-0xf027] [ 0.087573] pci 0000:00:11.0: reg 0x1c: [io 0xf010-0xf013] [ 0.087581] pci 0000:00:11.0: reg 0x20: [io 0xf000-0xf00f] [ 0.087589] pci 0000:00:11.0: reg 0x24: [mem 0xfe20b000-0xfe20b3ff] [ 0.087705] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 [ 0.087721] pci 0000:00:12.0: reg 0x10: [mem 0xfe20a000-0xfe20afff] [ 0.087886] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 [ 0.087905] pci 0000:00:12.2: reg 0x10: [mem 0xfe209000-0xfe2090ff] [ 0.087977] pci 0000:00:12.2: supports D1 D2 [ 0.087978] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.088077] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 [ 0.088093] pci 0000:00:13.0: reg 0x10: [mem 0xfe208000-0xfe208fff] [ 0.088228] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 [ 0.088247] pci 0000:00:13.2: reg 0x10: [mem 0xfe207000-0xfe2070ff] [ 0.088319] pci 0000:00:13.2: supports D1 D2 [ 0.088320] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.088409] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 [ 0.088551] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 [ 0.088573] pci 0000:00:14.2: reg 0x10: [mem 0xfe200000-0xfe203fff 64bit] [ 0.088634] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.088715] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 [ 0.088860] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 [ 0.089007] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 [ 0.089023] pci 0000:00:14.5: reg 0x10: [mem 0xfe206000-0xfe206fff] [ 0.089158] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310 [ 0.089174] pci 0000:00:16.0: reg 0x10: [mem 0xfe205000-0xfe205fff] [ 0.089308] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320 [ 0.089326] pci 0000:00:16.2: reg 0x10: [mem 0xfe204000-0xfe2040ff] [ 0.089399] pci 0000:00:16.2: supports D1 D2 [ 0.089400] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot [ 0.089489] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000 [ 0.089582] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000 [ 0.089669] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000 [ 0.089757] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000 [ 0.089850] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000 [ 0.089938] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000 [ 0.090084] pci 0000:01:00.0: [10de:1288] type 00 class 0x030000 [ 0.090101] pci 0000:01:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff] [ 0.090110] pci 0000:01:00.0: reg 0x14: [mem 0xf0000000-0xf7ffffff 64bit pref] [ 0.090120] pci 0000:01:00.0: reg 0x1c: [mem 0xf8000000-0xf9ffffff 64bit pref] [ 0.090127] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f] [ 0.090133] pci 0000:01:00.0: reg 0x30: [mem 0xfe000000-0xfe07ffff pref] [ 0.090139] pci 0000:01:00.0: enabling Extended Tags [ 0.090220] pci 0000:01:00.1: [10de:0e0f] type 00 class 0x040300 [ 0.090234] pci 0000:01:00.1: reg 0x10: [mem 0xfe080000-0xfe083fff] [ 0.090271] pci 0000:01:00.1: enabling Extended Tags [ 0.100019] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.100023] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 0.100025] pci 0000:00:02.0: bridge window [mem 0xfd000000-0xfe0fffff] [ 0.100028] pci 0000:00:02.0: bridge window [mem 0xf0000000-0xf9ffffff 64bit pref] [ 0.100077] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 0.100100] pci 0000:02:00.0: reg 0x10: [io 0xd000-0xd0ff] [ 0.100122] pci 0000:02:00.0: reg 0x18: [mem 0xfa104000-0xfa104fff 64bit pref] [ 0.100136] pci 0000:02:00.0: reg 0x20: [mem 0xfa100000-0xfa103fff 64bit pref] [ 0.100212] pci 0000:02:00.0: supports D1 D2 [ 0.100213] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.112019] pci 0000:00:04.0: PCI bridge to [bus 02] [ 0.112023] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff] [ 0.112027] pci 0000:00:04.0: bridge window [mem 0xfa100000-0xfa1fffff 64bit pref] [ 0.112079] pci 0000:03:00.0: [1b21:1142] type 00 class 0x0c0330 [ 0.112107] pci 0000:03:00.0: reg 0x10: [mem 0xfe100000-0xfe107fff 64bit] [ 0.112216] pci 0000:03:00.0: PME# supported from D3cold [ 0.124016] pci 0000:00:07.0: PCI bridge to [bus 03] [ 0.124021] pci 0000:00:07.0: bridge window [mem 0xfe100000-0xfe1fffff] [ 0.124065] pci 0000:04:05.0: [1102:0006] type 00 class 0x040100 [ 0.124089] pci 0000:04:05.0: reg 0x10: [io 0xc000-0xc01f] [ 0.124211] pci 0000:04:05.0: supports D1 D2 [ 0.124244] pci 0000:04:05.1: [1102:7004] type 00 class 0x098000 [ 0.124266] pci 0000:04:05.1: reg 0x10: [io 0xc020-0xc027] [ 0.124355] pci 0000:04:05.1: supports D1 D2 [ 0.124423] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode) [ 0.124426] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff] [ 0.124431] pci 0000:00:14.4: bridge window [io 0x0000-0x03af window] (subtractive decode) [ 0.124433] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode) [ 0.124434] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df window] (subtractive decode) [ 0.124435] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.124436] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.124437] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode) [ 0.124438] pci 0000:00:14.4: bridge window [mem 0xe0000000-0xffffffff window] (subtractive decode) [ 0.124881] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0 [ 0.124963] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0 [ 0.125049] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0 [ 0.125133] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 10 11 14 15) *0 [ 0.125202] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0 [ 0.125257] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0 [ 0.125333] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0 [ 0.125387] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0 [ 0.125524] ACPI: EC: interrupt unblocked [ 0.125530] ACPI: EC: event unblocked [ 0.125535] ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0xa, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.125536] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as boot DSDT EC to handle transactions and events [ 0.125737] SCSI subsystem initialized [ 0.125751] libata version 3.00 loaded. [ 0.125751] pci 0000:01:00.0: vgaarb: setting as boot VGA device [ 0.125751] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.125751] pci 0000:01:00.0: vgaarb: bridge control possible [ 0.125751] vgaarb: loaded [ 0.125751] ACPI: bus type USB registered [ 0.125751] usbcore: registered new interface driver usbfs [ 0.125751] usbcore: registered new interface driver hub [ 0.125751] usbcore: registered new device driver usb [ 0.125751] EDAC MC: Ver: 3.0.0 [ 0.125751] PCI: Using ACPI for IRQ routing [ 0.132152] PCI: pci_cache_line_size set to 64 bytes [ 0.132200] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff] [ 0.132201] e820: reserve RAM buffer [mem 0xda6ea000-0xdbffffff] [ 0.132202] e820: reserve RAM buffer [mem 0xdca3a000-0xdfffffff] [ 0.132202] e820: reserve RAM buffer [mem 0xdd083000-0xdfffffff] [ 0.132203] e820: reserve RAM buffer [mem 0xdd800000-0xdfffffff] [ 0.132204] e820: reserve RAM buffer [mem 0x61f000000-0x61fffffff] [ 0.132288] NetLabel: Initializing [ 0.132289] NetLabel: domain hash size = 128 [ 0.132289] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.132301] NetLabel: unlabeled traffic allowed by default [ 0.132320] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.132320] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.134097] clocksource: Switched to clocksource hpet [ 0.144052] VFS: Disk quotas dquot_6.6.0 [ 0.144068] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.144175] AppArmor: AppArmor Filesystem Enabled [ 0.144202] pnp: PnP ACPI init [ 0.144351] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved [ 0.144355] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.144674] system 00:01: [io 0x040b] has been reserved [ 0.144676] system 00:01: [io 0x04d6] has been reserved [ 0.144677] system 00:01: [io 0x0c00-0x0c01] has been reserved [ 0.144678] system 00:01: [io 0x0c14] has been reserved [ 0.144680] system 00:01: [io 0x0c50-0x0c51] has been reserved [ 0.144681] system 00:01: [io 0x0c52] has been reserved [ 0.144682] system 00:01: [io 0x0c6c] has been reserved [ 0.144683] system 00:01: [io 0x0c6f] has been reserved [ 0.144685] system 00:01: [io 0x0cd0-0x0cd1] has been reserved [ 0.144686] system 00:01: [io 0x0cd2-0x0cd3] has been reserved [ 0.144687] system 00:01: [io 0x0cd4-0x0cd5] has been reserved [ 0.144688] system 00:01: [io 0x0cd6-0x0cd7] has been reserved [ 0.144690] system 00:01: [io 0x0cd8-0x0cdf] has been reserved [ 0.144691] system 00:01: [io 0x0800-0x089f] has been reserved [ 0.144692] system 00:01: [io 0x0b20-0x0b3f] has been reserved [ 0.144694] system 00:01: [io 0x0900-0x090f] has been reserved [ 0.144695] system 00:01: [io 0x0910-0x091f] has been reserved [ 0.144696] system 00:01: [io 0xfe00-0xfefe] has been reserved [ 0.144698] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.144700] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.144701] system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved [ 0.144703] system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved [ 0.144704] system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved [ 0.144706] system 00:01: [mem 0xfed00000-0xfed00fff] could not be reserved [ 0.144708] system 00:01: [mem 0xff800000-0xffffffff] has been reserved [ 0.144711] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.144882] system 00:02: [io 0x0290-0x02af] has been reserved [ 0.144886] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.144916] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.144975] system 00:04: [io 0x04d0-0x04d1] has been reserved [ 0.144978] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.145021] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.145231] pnp 00:06: [dma 0 disabled] [ 0.145274] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.145413] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.145526] system 00:08: [mem 0xfec20000-0xfec200ff] could not be reserved [ 0.145530] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.145680] pnp: PnP ACPI: found 9 devices [ 0.152194] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.152217] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.152220] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 0.152223] pci 0000:00:02.0: bridge window [mem 0xfd000000-0xfe0fffff] [ 0.152225] pci 0000:00:02.0: bridge window [mem 0xf0000000-0xf9ffffff 64bit pref] [ 0.152229] pci 0000:00:04.0: PCI bridge to [bus 02] [ 0.152230] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff] [ 0.152234] pci 0000:00:04.0: bridge window [mem 0xfa100000-0xfa1fffff 64bit pref] [ 0.152237] pci 0000:00:07.0: PCI bridge to [bus 03] [ 0.152240] pci 0000:00:07.0: bridge window [mem 0xfe100000-0xfe1fffff] [ 0.152245] pci 0000:00:14.4: PCI bridge to [bus 04] [ 0.152247] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff] [ 0.152257] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 0.152259] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 0.152260] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 0.152261] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 0.152262] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window] [ 0.152263] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window] [ 0.152264] pci_bus 0000:00: resource 10 [mem 0xe0000000-0xffffffff window] [ 0.152266] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.152267] pci_bus 0000:01: resource 1 [mem 0xfd000000-0xfe0fffff] [ 0.152268] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf9ffffff 64bit pref] [ 0.152269] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] [ 0.152270] pci_bus 0000:02: resource 2 [mem 0xfa100000-0xfa1fffff 64bit pref] [ 0.152271] pci_bus 0000:03: resource 1 [mem 0xfe100000-0xfe1fffff] [ 0.152273] pci_bus 0000:04: resource 0 [io 0xc000-0xcfff] [ 0.152274] pci_bus 0000:04: resource 4 [io 0x0000-0x03af window] [ 0.152275] pci_bus 0000:04: resource 5 [io 0x03e0-0x0cf7 window] [ 0.152276] pci_bus 0000:04: resource 6 [io 0x03b0-0x03df window] [ 0.152277] pci_bus 0000:04: resource 7 [io 0x0d00-0xffff window] [ 0.152278] pci_bus 0000:04: resource 8 [mem 0x000a0000-0x000bffff window] [ 0.152279] pci_bus 0000:04: resource 9 [mem 0x000c0000-0x000dffff window] [ 0.152280] pci_bus 0000:04: resource 10 [mem 0xe0000000-0xffffffff window] [ 0.152340] NET: Registered protocol family 2 [ 0.152614] TCP established hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.153155] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.153402] TCP: Hash tables configured (established 262144 bind 65536) [ 0.153466] UDP hash table entries: 16384 (order: 7, 524288 bytes) [ 0.153608] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes) [ 0.153759] NET: Registered protocol family 1 [ 0.480252] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.480391] PCI: CLS 64 bytes, default 64 [ 0.480430] Unpacking initramfs... [ 1.200259] Freeing initrd memory: 60664K [ 1.200942] PCI-DMA: Disabling AGP. [ 1.200999] PCI-DMA: aperture base @ d0000000 size 65536 KB [ 1.201000] PCI-DMA: using GART IOMMU. [ 1.201001] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 1.203870] amd_uncore: AMD NB counters detected [ 1.203969] LVT offset 0 assigned for vector 0x400 [ 1.204060] perf: AMD IBS detected (0x000000ff) [ 1.204106] Scanning for low memory corruption every 60 seconds [ 1.204676] Initialise system trusted keyrings [ 1.204683] Key type blacklist registered [ 1.204717] workingset: timestamp_bits=36 max_order=23 bucket_order=0 [ 1.205854] zbud: loaded [ 1.206246] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.206381] fuse init (API version 7.26) [ 1.207961] Key type asymmetric registered [ 1.207961] Asymmetric key parser 'x509' registered [ 1.207985] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 1.208036] io scheduler noop registered [ 1.208037] io scheduler deadline registered [ 1.208060] io scheduler cfq registered (default) [ 1.208531] vesafb: mode is 1920x1080x32, linelength=7680, pages=0 [ 1.208532] vesafb: scrolling: redraw [ 1.208533] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.208552] vesafb: framebuffer at 0xf9000000, mapped to 0x (ptrval), using 8128k, total 8128k [ 1.208626] Console: switching to colour frame buffer device 240x67 [ 1.208651] fb0: VESA VGA frame buffer device [ 1.208737] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.208760] ACPI: Power Button [PWRB] [ 1.208795] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.208817] ACPI: Power Button [PWRF] [ 1.209275] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.229754] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.231662] Linux agpgart interface v0.103 [ 1.233139] loop: module loaded [ 1.233288] libphy: Fixed MDIO Bus: probed [ 1.233289] tun: Universal TUN/TAP device driver, 1.6 [ 1.233320] PPP generic driver version 2.4.2 [ 1.233388] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.233390] ehci-pci: EHCI PCI platform driver [ 1.233493] QUIRK: Enable AMD PLL fix [ 1.233514] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.233519] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 1.233523] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.233531] ehci-pci 0000:00:12.2: debug port 1 [ 1.233566] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe209000 [ 1.252117] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.252222] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.252226] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.252229] usb usb1: Product: EHCI Host Controller [ 1.252231] usb usb1: Manufacturer: Linux 4.15.0-46-generic ehci_hcd [ 1.252234] usb usb1: SerialNumber: 0000:00:12.2 [ 1.252359] hub 1-0:1.0: USB hub found [ 1.252365] hub 1-0:1.0: 5 ports detected [ 1.252597] ehci-pci 0000:00:13.2: EHCI Host Controller [ 1.252601] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1.252603] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.252612] ehci-pci 0000:00:13.2: debug port 1 [ 1.252638] ehci-pci 0000:00:13.2: irq 21, io mem 0xfe207000 [ 1.268122] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.268223] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.268226] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.268229] usb usb2: Product: EHCI Host Controller [ 1.268232] usb usb2: Manufacturer: Linux 4.15.0-46-generic ehci_hcd [ 1.268235] usb usb2: SerialNumber: 0000:00:13.2 [ 1.268349] hub 2-0:1.0: USB hub found [ 1.268354] hub 2-0:1.0: 5 ports detected [ 1.268573] ehci-pci 0000:00:16.2: EHCI Host Controller [ 1.268578] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3 [ 1.268580] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.268589] ehci-pci 0000:00:16.2: debug port 1 [ 1.268646] ehci-pci 0000:00:16.2: irq 23, io mem 0xfe204000 [ 1.284122] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00 [ 1.284223] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.284227] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.284230] usb usb3: Product: EHCI Host Controller [ 1.284232] usb usb3: Manufacturer: Linux 4.15.0-46-generic ehci_hcd [ 1.284235] usb usb3: SerialNumber: 0000:00:16.2 [ 1.284350] hub 3-0:1.0: USB hub found [ 1.284354] hub 3-0:1.0: 4 ports detected [ 1.284470] ehci-platform: EHCI generic platform driver [ 1.284479] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.284487] ohci-pci: OHCI PCI platform driver [ 1.284590] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 1.284594] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4 [ 1.284612] ohci-pci 0000:00:12.0: irq 18, io mem 0xfe20a000 [ 1.348142] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.348144] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.348145] usb usb4: Product: OHCI PCI host controller [ 1.348146] usb usb4: Manufacturer: Linux 4.15.0-46-generic ohci_hcd [ 1.348147] usb usb4: SerialNumber: 0000:00:12.0 [ 1.348311] hub 4-0:1.0: USB hub found [ 1.348317] hub 4-0:1.0: 5 ports detected [ 1.348523] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 1.348527] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.348549] ohci-pci 0000:00:13.0: irq 20, io mem 0xfe208000 [ 1.412140] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.412142] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.412143] usb usb5: Product: OHCI PCI host controller [ 1.412144] usb usb5: Manufacturer: Linux 4.15.0-46-generic ohci_hcd [ 1.412145] usb usb5: SerialNumber: 0000:00:13.0 [ 1.412310] hub 5-0:1.0: USB hub found [ 1.412317] hub 5-0:1.0: 5 ports detected [ 1.412513] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 1.412518] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 6 [ 1.412532] ohci-pci 0000:00:14.5: irq 18, io mem 0xfe206000 [ 1.476145] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.476146] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.476147] usb usb6: Product: OHCI PCI host controller [ 1.476148] usb usb6: Manufacturer: Linux 4.15.0-46-generic ohci_hcd [ 1.476149] usb usb6: SerialNumber: 0000:00:14.5 [ 1.476248] hub 6-0:1.0: USB hub found [ 1.476255] hub 6-0:1.0: 2 ports detected [ 1.476432] ohci-pci 0000:00:16.0: OHCI PCI host controller [ 1.476436] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 7 [ 1.476456] ohci-pci 0000:00:16.0: irq 22, io mem 0xfe205000 [ 1.540147] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.540148] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.540150] usb usb7: Product: OHCI PCI host controller [ 1.540151] usb usb7: Manufacturer: Linux 4.15.0-46-generic ohci_hcd [ 1.540151] usb usb7: SerialNumber: 0000:00:16.0 [ 1.540317] hub 7-0:1.0: USB hub found [ 1.540324] hub 7-0:1.0: 4 ports detected [ 1.540436] ohci-platform: OHCI generic platform driver [ 1.540444] uhci_hcd: USB Universal Host Controller Interface driver [ 1.540545] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 1.540549] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 8 [ 1.600931] usb 1-2: new high-speed USB device number 2 using ehci-pci [ 1.600987] xhci_hcd 0000:03:00.0: hcc params 0x0200e081 hci version 0x100 quirks 0x0000000010000410 [ 1.601192] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.601193] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.601194] usb usb8: Product: xHCI Host Controller [ 1.601195] usb usb8: Manufacturer: Linux 4.15.0-46-generic xhci-hcd [ 1.601196] usb usb8: SerialNumber: 0000:03:00.0 [ 1.601282] hub 8-0:1.0: USB hub found [ 1.601289] hub 8-0:1.0: 2 ports detected [ 1.601361] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 1.601363] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 9 [ 1.601366] xhci_hcd 0000:03:00.0: Host supports USB 3.0 SuperSpeed [ 1.601408] usb usb9: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.601426] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.601427] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.601428] usb usb9: Product: xHCI Host Controller [ 1.601429] usb usb9: Manufacturer: Linux 4.15.0-46-generic xhci-hcd [ 1.601430] usb usb9: SerialNumber: 0000:03:00.0 [ 1.601525] hub 9-0:1.0: USB hub found [ 1.601532] hub 9-0:1.0: 2 ports detected [ 1.601640] i8042: PNP: No PS/2 controller found. [ 1.601712] mousedev: PS/2 mouse device common for all mice [ 1.601855] rtc_cmos 00:03: RTC can wake from S4 [ 1.601947] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 1.601967] rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.601973] i2c /dev entries driver [ 1.601977] pcie_mp2_amd: AMD(R) PCI-E MP2 Communication Driver Version: 1.0 [ 1.602038] device-mapper: uevent: version 1.0.3 [ 1.602093] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com [ 1.602154] ledtrig-cpu: registered to indicate activity on CPUs [ 1.602483] NET: Registered protocol family 10 [ 1.606068] Segment Routing with IPv6 [ 1.606084] NET: Registered protocol family 17 [ 1.606128] Key type dns_resolver registered [ 1.606348] RAS: Correctable Errors collector initialized. [ 1.606380] microcode: microcode updated early to new patch_level=0x0600063e [ 1.606404] microcode: CPU0: patch_level=0x0600063e [ 1.606410] microcode: CPU1: patch_level=0x0600063e [ 1.606419] microcode: CPU2: patch_level=0x0600063e [ 1.606427] microcode: CPU3: patch_level=0x0600063e [ 1.606460] microcode: Microcode Update Driver: v2.2. [ 1.606468] sched_clock: Marking stable (1606456809, 0)->(1835418477, -228961668) [ 1.606681] registered taskstats version 1 [ 1.606689] Loading compiled-in X.509 certificates [ 1.609069] Loaded X.509 cert 'Build time autogenerated kernel key: 2afc10a0aded6eb10fbb305169a9135fbe739d7d' [ 1.609090] zswap: loaded using pool lzo/zbud [ 1.612435] Key type big_key registered [ 1.612440] Key type trusted registered [ 1.614088] Key type encrypted registered [ 1.614092] AppArmor: AppArmor sha1 policy hashing enabled [ 1.614094] ima: No TPM chip found, activating TPM-bypass! (rc=-19) [ 1.614098] ima: Allocated hash algorithm: sha1 [ 1.614110] evm: HMAC attrs: 0x1 [ 1.614383] Magic number: 11:299:437 [ 1.614494] rtc_cmos 00:03: setting system clock to 2019-03-18 15:26:44 UTC (1552922804) [ 1.614647] acpi_cpufreq: overriding BIOS provided _PSD data [ 1.614777] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.614778] EDD information not available. [ 1.620029] usb 3-3: new high-speed USB device number 2 using ehci-pci [ 1.804023] usb 5-1: new low-speed USB device number 2 using ohci-pci [ 2.081232] usb 5-1: New USB device found, idVendor=051d, idProduct=0002 [ 2.081242] usb 5-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 2.081251] usb 5-1: Product: Back-UPS HT 1000 FW:7.g2 .D USB FW:g2 [ 2.081257] usb 5-1: Manufacturer: American Power Conversion [ 2.081261] usb 5-1: SerialNumber: JB0611016632 [ 2.081388] Freeing unused kernel memory: 2408K [ 2.092138] Write protecting the kernel read-only data: 20480k [ 2.093726] Freeing unused kernel memory: 2008K [ 2.097750] Freeing unused kernel memory: 1880K [ 2.105573] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.112439] usb 3-3: New USB device found, idVendor=0bda, idProduct=5411 [ 2.112441] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.112443] usb 3-3: Product: 4-Port USB 2.0 Hub [ 2.112444] usb 3-3: Manufacturer: Generic [ 2.113718] hub 3-3:1.0: USB hub found [ 2.114712] hub 3-3:1.0: 4 ports detected [ 2.117646] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 2.117711] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 2.117721] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 2.175474] usb 1-2: New USB device found, idVendor=0846, idProduct=9052 [ 2.175476] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.175478] usb 1-2: Product: 802.11ac WLAN Adapter [ 2.175479] usb 1-2: Manufacturer: Realtek [ 2.175480] usb 1-2: SerialNumber: 00e04c000001 [ 2.183706] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 2.183715] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control [ 2.184627] r8169 0000:02:00.0 eth0: RTL8168f/8111f at 0x (ptrval), 08:62:66:2d:07:29, XID 08000800 IRQ 33 [ 2.184629] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 2.184633] ahci 0000:00:11.0: version 3.0 [ 2.184779] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x5 impl SATA mode [ 2.184781] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part [ 2.185760] scsi host0: ahci [ 2.186159] scsi host1: ahci [ 2.186502] scsi host2: ahci [ 2.186557] ata1: SATA max UDMA/133 abar m1024@0xfe20b000 port 0xfe20b100 irq 19 [ 2.186558] ata2: DUMMY [ 2.186559] ata3: SATA max UDMA/133 abar m1024@0xfe20b000 port 0xfe20b200 irq 19 [ 2.194010] hidraw: raw HID events driver (C) Jiri Kosina [ 2.203538] nvidia: loading out-of-tree module taints kernel. [ 2.203546] nvidia: module license 'NVIDIA' taints kernel. [ 2.203546] Disabling lock debugging due to kernel taint [ 2.213821] nvidia: module verification failed: signature and/or required key missing - tainting kernel [ 2.222561] nvidia-nvlink: Nvlink Core is being initialized, major device number 242 [ 2.222927] nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem [ 2.223059] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 384.130 Wed Mar 21 03:37:26 PDT 2018 (using threaded interrupts) [ 2.225053] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 384.130 Wed Mar 21 02:59:49 PDT 2018 [ 2.225779] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver [ 2.225780] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 0 [ 2.236038] tsc: Refined TSC clocksource calibration: 4117.783 MHz [ 2.236045] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3b5afe2b972, max_idle_ns: 440795316020 ns [ 2.246316] r8169 0000:02:00.0 enp2s0: renamed from eth0 [ 2.312126] usb 8-2: new high-speed USB device number 2 using xhci_hcd [ 2.372115] usb 2-4: new high-speed USB device number 3 using ehci-pci [ 2.404125] usb 3-3.2: new full-speed USB device number 3 using ehci-pci [ 2.460983] usb 8-2: New USB device found, idVendor=0bc2, idProduct=3300 [ 2.460984] usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.460986] usb 8-2: Product: Desktop [ 2.460987] usb 8-2: Manufacturer: Seagate [ 2.460988] usb 8-2: SerialNumber: 2GHLP2EM [ 2.466092] usb-storage 8-2:1.0: USB Mass Storage device detected [ 2.466198] scsi host3: usb-storage 8-2:1.0 [ 2.466261] usbcore: registered new interface driver usb-storage [ 2.467200] usbcore: registered new interface driver usbhid [ 2.467201] usbhid: USB HID core driver [ 2.467393] usbcore: registered new interface driver uas [ 2.470266] hid-generic 0003:051D:0002.0001: hiddev0,hidraw0: USB HID v1.10 Device [American Power Conversion Back-UPS HT 1000 FW:7.g2 .D USB FW:g2 ] on usb-0000:00:13.0-1/input0 [ 2.513883] usb 3-3.2: New USB device found, idVendor=12c9, idProduct=102a [ 2.513885] usb 3-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.513886] usb 3-3.2: Product: 2.4G Wireless Mouse [ 2.513887] usb 3-3.2: Manufacturer: Newmen Tech.,LTD [ 2.515628] input: Newmen Tech.,LTD 2.4G Wireless Mouse as /devices/pci0000:00/0000:00:16.2/usb3/3-3/3-3.2/3-3.2:1.0/0003:12C9:102A.0002/input/input2 [ 2.515764] hid-generic 0003:12C9:102A.0002: input,hiddev1,hidraw1: USB HID v1.10 Mouse [Newmen Tech.,LTD 2.4G Wireless Mouse] on usb-0000:00:16.2-3.2/input0 [ 2.533124] usb 2-4: New USB device found, idVendor=14cd, idProduct=8601 [ 2.533126] usb 2-4: New USB device strings: Mfr=1, Product=3, SerialNumber=0 [ 2.533127] usb 2-4: Product: USB 2.0 Hub [ 2.533128] usb 2-4: Manufacturer: USB Device [ 2.533399] hub 2-4:1.0: USB hub found [ 2.533497] hub 2-4:1.0: 4 ports detected [ 2.660143] usb 2-5: new high-speed USB device number 4 using ehci-pci [ 2.660206] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.661175] ata1.00: ATA-9: CT240BX200SSD1, MU02.6, max UDMA/133 [ 2.661177] ata1.00: 468862128 sectors, multi 2: LBA48 NCQ (depth 31/32), AA [ 2.661734] ata1.00: configured for UDMA/133 [ 2.661979] scsi 0:0:0:0: Direct-Access ATA CT240BX200SSD1 .6 PQ: 0 ANSI: 5 [ 2.662180] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.662215] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB) [ 2.662216] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 2.662230] sd 0:0:0:0: [sda] Write Protect is off [ 2.662232] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.662263] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.662996] sda: sda1 sda2 < sda5 > [ 2.663629] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.664038] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.664121] ata3.00: ATA-9: SPCC Solid State Disk, SAFM12.2, max UDMA/133 [ 2.664123] ata3.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.664221] ata3.00: configured for UDMA/133 [ 2.664341] scsi 2:0:0:0: Direct-Access ATA SPCC Solid State 12.2 PQ: 0 ANSI: 5 [ 2.664558] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 2.664697] sd 2:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/112 GiB) [ 2.664717] sd 2:0:0:0: [sdb] Write Protect is off [ 2.664719] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.664759] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.665264] sdb: sdb1 [ 2.665639] sd 2:0:0:0: [sdb] Attached SCSI disk [ 2.677633] random: fast init done [ 2.822462] usb 2-5: New USB device found, idVendor=2109, idProduct=0715 [ 2.822464] usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.822465] usb 2-5: Product: VLI Product String [ 2.822466] usb 2-5: Manufacturer: VLI Manufacture String [ 2.822467] usb 2-5: SerialNumber: 000000123ADA [ 2.822956] scsi host4: uas [ 2.893952] scsi 4:0:0:0: Direct-Access ST500LT0 12-1DG142 0003 PQ: 0 ANSI: 6 [ 2.895471] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 2.896028] usb 2-4.1: new high-speed USB device number 5 using ehci-pci [ 2.896949] sd 4:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 2.896950] sd 4:0:0:0: [sdc] 4096-byte physical blocks [ 2.897197] sd 4:0:0:0: [sdc] Write Protect is off [ 2.897199] sd 4:0:0:0: [sdc] Mode Sense: 2f 00 00 00 [ 2.897698] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.026356] usb 2-4.1: New USB device found, idVendor=148f, idProduct=5370 [ 3.026360] usb 2-4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.026363] usb 2-4.1: Product: 802.11 n WLAN [ 3.026366] usb 2-4.1: Manufacturer: Ralink [ 3.026368] usb 2-4.1: SerialNumber: 1.0 [ 3.108116] usb 2-4.2: new full-speed USB device number 6 using ehci-pci [ 3.220403] usb 2-4.2: New USB device found, idVendor=046d, idProduct=c52b [ 3.220405] usb 2-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.220406] usb 2-4.2: Product: USB Receiver [ 3.220407] usb 2-4.2: Manufacturer: Logitech [ 3.260284] clocksource: Switched to clocksource tsc [ 3.308111] usb 2-4.4: new full-speed USB device number 7 using ehci-pci [ 3.388109] usb 2-4.4: device descriptor read/64, error -32 [ 3.484582] scsi 3:0:0:0: Direct-Access Seagate Desktop 0130 PQ: 0 ANSI: 4 [ 3.484801] sd 3:0:0:0: Attached scsi generic sg3 type 0 [ 3.484978] sd 3:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 3.485319] sd 3:0:0:0: [sdd] Write Protect is off [ 3.485320] sd 3:0:0:0: [sdd] Mode Sense: 2f 08 00 00 [ 3.487775] sd 3:0:0:0: [sdd] No Caching mode page found [ 3.487777] sd 3:0:0:0: [sdd] Assuming drive cache: write through [ 3.511957] sdd: sdd1 [ 3.513010] sd 3:0:0:0: [sdd] Attached SCSI disk [ 3.813791] usb 2-4.4: New USB device found, idVendor=0a12, idProduct=0001 [ 3.813796] usb 2-4.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.818435] logitech-djreceiver 0003:046D:C52B.0005: hiddev2,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:13.2-4.2/input2 [ 3.948862] input: Logitech K400 Plus as /devices/pci0000:00/0000:00:13.2/usb2/2-4/2-4.2/2-4.2:1.2/0003:046D:C52B.0005/0003:046D:404D.0006/input/input3 [ 3.948962] logitech-hidpp-device 0003:046D:404D.0006: input,hidraw3: USB HID v1.11 Keyboard [Logitech K400 Plus] on usb-0000:00:13.2-4.2:1 [ 4.089811] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 4.207632] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN) [ 4.224220] systemd[1]: Detected architecture x86-64. [ 4.224435] systemd[1]: Set hostname to . [ 4.296780] systemd[1]: Created slice User and Session Slice. [ 4.296836] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 4.296843] systemd[1]: Reached target Encrypted Volumes. [ 4.296871] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 4.296906] systemd[1]: Listening on udev Control Socket. [ 4.296960] systemd[1]: Created slice System Slice. [ 4.296974] systemd[1]: Reached target User and Group Name Lookups. [ 4.318539] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 4.326600] arp_tables: arp_tables: (C) 2002 David S. Miller [ 4.331411] sdc: sdc1 [ 4.335513] sd 4:0:0:0: [sdc] Attached SCSI disk [ 4.340540] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.349506] Bridge firewalling registered [ 4.352883] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 4.373124] systemd-journald[358]: Received request to flush runtime journal from PID 1 [ 4.418501] ip_tables: (C) 2000-2006 Netfilter Core Team [ 4.598743] audit: type=1400 audit(1552922807.477:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/4917/usr/lib/snapd/snap-confine" pid=605 comm="apparmor_parser" [ 4.598748] audit: type=1400 audit(1552922807.477:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/4917/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=605 comm="apparmor_parser" [ 4.616323] audit: type=1400 audit(1552922807.497:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=603 comm="apparmor_parser" [ 4.616327] audit: type=1400 audit(1552922807.497:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=603 comm="apparmor_parser" [ 4.629314] audit: type=1400 audit(1552922807.509:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=604 comm="apparmor_parser" [ 4.629318] audit: type=1400 audit(1552922807.509:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=604 comm="apparmor_parser" [ 4.629321] audit: type=1400 audit(1552922807.509:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=604 comm="apparmor_parser" [ 4.629323] audit: type=1400 audit(1552922807.509:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=604 comm="apparmor_parser" [ 4.639356] audit: type=1400 audit(1552922807.517:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=617 comm="apparmor_parser" [ 4.657492] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 4.707831] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 4.707838] piix4_smbus 0000:00:14.0: Using register 0x2c for SMBus port selection [ 4.708216] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20 [ 4.777053] gameport gameport0: EMU10K1 is pci0000:04:05.1/gameport0, io 0xc020, speed 724kHz [ 4.835524] snd_emu10k1x 0000:04:05.0: Model 1003 Rev 00000000 Serial 10031102 [ 4.846003] nvidia-uvm: Loaded the UVM driver in 8 mode, major device number 241 [ 4.854683] snd_hda_intel 0000:01:00.1: Disabling MSI [ 4.854693] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client [ 4.873889] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line [ 4.873892] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 4.873894] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 4.873895] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 4.873899] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x11/0x0 [ 4.873900] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 4.873901] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19 [ 4.873903] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18 [ 4.873904] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a [ 4.889181] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input4 [ 4.889246] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input5 [ 4.889314] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input6 [ 4.889376] input: HDA ATI SB Line Out as /devices/pci0000:00/0000:00:14.2/sound/card1/input7 [ 4.889448] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input8 [ 4.957159] AVX version of gcm_enc/dec engaged. [ 4.957160] AES CTR mode by8 optimization enabled [ 5.077616] kvm: Nested Virtualization enabled [ 5.077620] kvm: Nested Paging enabled [ 5.086883] MCE: In-kernel MCE decoding enabled. [ 5.089380] EDAC amd64: Node 0: DRAM ECC disabled. [ 5.089381] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 5.253779] resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000c0000-0x000dffff window] [ 5.254167] caller os_map_kernel_space.part.2+0x6d/0x80 [nvidia] mapping multiple BARs [ 5.311980] asus_wmi: ASUS WMI generic driver loaded [ 5.313789] asus_wmi: Initialization: 0x0 [ 5.314054] asus_wmi: BIOS WMI version: 0.9 [ 5.314242] asus_wmi: SFUN value: 0x0 [ 5.315416] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input9 [ 5.315639] asus_wmi: Number of fans: 1 [ 5.535363] random: crng init done [ 5.535364] random: 7 urandom warning(s) missed due to ratelimiting [ 5.639148] NVRM: Your system is not currently configured to drive a VGA console on the primary VGA device. The NVIDIA Linux graphics driver requires the use of a text-mode VGA console. Use of other console drivers including, but not limited to, vesafb, may result in corruption and stability problems, and is not supported. [ 5.645743] Adding 25062396k swap on /dev/sda5. Priority:-2 extents:1 across:25062396k SSFS [ 5.696493] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input10 [ 5.696944] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input11 [ 5.857648] Bluetooth: Core ver 2.22 [ 5.857663] NET: Registered protocol family 31 [ 5.857664] Bluetooth: HCI device and connection manager initialized [ 5.857668] Bluetooth: HCI socket layer initialized [ 5.857671] Bluetooth: L2CAP socket layer initialized [ 5.857676] Bluetooth: SCO socket layer initialized [ 5.869386] usbcore: registered new interface driver btusb [ 6.329604] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [ 6.458281] r8169 0000:02:00.0 enp2s0: link down [ 6.458521] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [ 6.468723] r8169 0000:02:00.0 enp2s0: link down [ 6.474442] resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000c0000-0x000dffff window] [ 6.474846] caller os_map_kernel_space.part.2+0x6d/0x80 [nvidia] mapping multiple BARs [ 6.687582] nvidia-modeset: Allocated GPU:0 (GPU-1b8b889b-6fd4-3919-47e9-60ec7ff50544) @ PCI:0000:01:00.0 [ 6.873837] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 6.876789] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 6.988034] usb 2-4.1: reset high-speed USB device number 5 using ehci-pci [ 7.111027] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5390, rev 0502 detected [ 7.144687] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5370 detected [ 7.150823] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 7.151167] usbcore: registered new interface driver rt2800usb [ 7.159018] rt2800usb 2-4.1:1.0 wlx7cdd908b43ea: renamed from wlan0 [ 7.181070] IPv6: ADDRCONF(NETDEV_UP): wlx7cdd908b43ea: link is not ready [ 7.181190] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin' [ 7.182902] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29 [ 7.456531] IPv6: ADDRCONF(NETDEV_UP): wlx7cdd908b43ea: link is not ready [ 7.529745] IPv6: ADDRCONF(NETDEV_UP): wlx7cdd908b43ea: link is not ready [ 7.889033] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 7.889035] Bluetooth: BNEP filters: protocol multicast [ 7.889040] Bluetooth: BNEP socket layer initialized [ 7.900093] Bluetooth: hci0: command 0x1001 tx timeout [ 10.055019] wlx7cdd908b43ea: authenticate with 20:4e:7f:28:27:84 [ 10.090415] wlx7cdd908b43ea: send auth to 20:4e:7f:28:27:84 (try 1/3) [ 10.093542] wlx7cdd908b43ea: authenticated [ 10.096564] wlx7cdd908b43ea: associate with 20:4e:7f:28:27:84 (try 1/3) [ 10.103880] wlx7cdd908b43ea: RX AssocResp from 20:4e:7f:28:27:84 (capab=0x411 status=0 aid=1) [ 10.110742] wlx7cdd908b43ea: associated [ 10.157781] IPv6: ADDRCONF(NETDEV_CHANGE): wlx7cdd908b43ea: link becomes ready [ 14.013149] vboxdrv: Found 4 processor cores [ 14.036269] vboxdrv: TSC mode is Invariant, tentative frequency 4117768735 Hz [ 14.036270] vboxdrv: Successfully loaded version 5.1.38_Ubuntu (interface 0x002a0000) [ 14.048357] VBoxNetFlt: Successfully started. [ 14.054505] VBoxNetAdp: Successfully started. [ 14.061369] VBoxPciLinuxInit [ 14.066209] vboxpci: IOMMU not found (not registered) [ 16.092121] Bluetooth: hci0: CSR: Local version failed (-110) [ 18.108115] Bluetooth: hci0: command 0x1001 tx timeout [ 19.758422] r8169 0000:02:00.0 enp2s0: link up [ 19.758435] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready [ 26.332115] Bluetooth: hci0: CSR: Local version failed (-110) [ 1135.727728] ata3: exception Emask 0x10 SAct 0x0 SErr 0x90202 action 0xe frozen [ 1135.727736] ata3: irq_stat 0x00400000, PHY RDY changed [ 1135.727934] ata3: SError: { RecovComm Persist PHYRdyChg 10B8B } [ 1135.727952] ata3: hard resetting link [ 1136.599801] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1136.600121] ata3.00: configured for UDMA/133 [ 1136.600126] ata3: EH complete [ 1142.999620] logitech-hidpp-device 0003:046D:404D.0006: HID++ 4.1 device connected. [ 1155.817882] logitech-djreceiver 0003:046D:C52B.0009: hiddev2,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:13.2-4.2/input2 [ 1155.966788] input: Logitech K400 Plus as /devices/pci0000:00/0000:00:13.2/usb2/2-4/2-4.2/2-4.2:1.2/0003:046D:C52B.0009/0003:046D:404D.000A/input/input12 [ 1155.967118] logitech-hidpp-device 0003:046D:404D.000A: input,hidraw3: USB HID v1.11 Keyboard [Logitech K400 Plus] on usb-0000:00:13.2-4.2:1 [ 1156.495013] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null) [ 1160.999442] usb 8-2: reset high-speed USB device number 2 using xhci_hcd [ 1162.719602] EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null) [10146.267317] kauditd_printk_skb: 45 callbacks suppressed [10146.267318] audit: type=1400 audit(1552932948.568:56): apparmor="ALLOWED" operation="connect" profile="libreoffice-oopslash" name="/run/nscd/socket" pid=30962 comm="oosplash" requested_mask="wr" denied_mask="wr" fsuid=1000 ouid=0 [10146.504532] audit: type=1400 audit(1552932948.804:57): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/usr/share/nvidia-384/nvidia-application-profiles-384.130-rc" pid=30982 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [10146.517156] audit: type=1400 audit(1552932948.816:58): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/usr/share/nvidia-384/nvidia-application-profiles-384.130-rc" pid=30982 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [10146.526017] audit: type=1400 audit(1552932948.824:59): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/proc/modules" pid=30982 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [10146.526262] audit: type=1400 audit(1552932948.824:60): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/proc/driver/nvidia/params" pid=30982 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [10146.526266] audit: type=1400 audit(1552932948.824:61): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/dev/nvidiactl" pid=30982 comm="soffice.bin" requested_mask="wr" denied_mask="wr" fsuid=1000 ouid=0 [10146.526385] audit: type=1400 audit(1552932948.824:62): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/proc/modules" pid=30982 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [10146.526521] audit: type=1400 audit(1552932948.824:63): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/dev/nvidia-modeset" pid=30982 comm="soffice.bin" requested_mask="wr" denied_mask="wr" fsuid=1000 ouid=0 [10146.526564] audit: type=1400 audit(1552932948.824:64): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/proc/driver/nvidia/params" pid=30982 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [10146.526654] audit: type=1400 audit(1552932948.824:65): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/dev/nvidia0" pid=30982 comm="soffice.bin" requested_mask="wr" denied_mask="wr" fsuid=1000 ouid=0 [11938.084588] kauditd_printk_skb: 63 callbacks suppressed [11938.084590] audit: type=1400 audit(1552934740.552:129): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/proc/30981/mountinfo" pid=30981 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000 [11938.085066] audit: type=1400 audit(1552934740.552:130): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/proc/30981/cgroup" pid=30981 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000 [11938.085149] audit: type=1400 audit(1552934740.552:131): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/sys/fs/cgroup/memory/memory.limit_in_bytes" pid=30981 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [11938.085262] audit: type=1400 audit(1552934740.552:132): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/sys/fs/cgroup/cpu,cpuacct/cpu.cfs_quota_us" pid=30981 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [11938.085304] audit: type=1400 audit(1552934740.552:133): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/sys/fs/cgroup/cpu,cpuacct/cpu.cfs_period_us" pid=30981 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [11938.085344] audit: type=1400 audit(1552934740.552:134): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/sys/fs/cgroup/cpu,cpuacct/cpu.shares" pid=30981 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [11938.085465] audit: type=1400 audit(1552934740.552:135): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/sys/fs/cgroup/cpu,cpuacct/cpu.cfs_quota_us" pid=30981 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [11938.085497] audit: type=1400 audit(1552934740.552:136): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/sys/fs/cgroup/cpu,cpuacct/cpu.cfs_period_us" pid=30981 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [11938.085532] audit: type=1400 audit(1552934740.552:137): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/sys/fs/cgroup/cpu,cpuacct/cpu.shares" pid=30981 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [11938.085566] audit: type=1400 audit(1552934740.552:138): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/sys/fs/cgroup/memory/memory.limit_in_bytes" pid=30981 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 [23579.299824] ata3: exception Emask 0x10 SAct 0x0 SErr 0x90202 action 0xe frozen [23579.299832] ata3: irq_stat 0x00400000, PHY RDY changed [23579.299838] ata3: SError: { RecovComm Persist PHYRdyChg 10B8B } [23579.299846] ata3: hard resetting link [23580.174501] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [23580.174761] ata3.00: configured for UDMA/133 [23580.174767] ata3: EH complete [29182.751900] ata3: exception Emask 0x10 SAct 0x0 SErr 0x90202 action 0xe frozen [29182.751908] ata3: irq_stat 0x00400000, PHY RDY changed [29182.751913] ata3: SError: { RecovComm Persist PHYRdyChg 10B8B } [29182.751921] ata3: hard resetting link [29183.624511] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [29183.624878] ata3.00: configured for UDMA/133 [29183.624883] ata3: EH complete [38407.505482] wlx7cdd908b43ea: deauthenticating from 20:4e:7f:28:27:84 by local choice (Reason: 3=DEAUTH_LEAVING) [38418.175109] PM: suspend entry (deep) [38418.175112] PM: Syncing filesystems ... done. [38419.011851] Freezing user space processes ... (elapsed 0.003 seconds) done. [38419.015418] OOM killer disabled. [38419.015418] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [38419.016882] Suspending console(s) (use no_console_suspend to debug) [38419.017582] serial 00:06: disabled [38419.031534] sd 4:0:0:0: [sdc] Synchronizing SCSI cache [38419.031558] sd 0:0:0:0: [sda] Synchronizing SCSI cache [38419.031574] sd 2:0:0:0: [sdb] Synchronizing SCSI cache [38419.032241] sd 0:0:0:0: [sda] Stopping disk [38419.040388] sd 2:0:0:0: [sdb] Stopping disk [38419.118290] ACPI: EC: interrupt blocked [38419.135916] ACPI: Preparing to enter system sleep state S3 [38419.136008] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [38419.136899] ACPI: EC: event blocked [38419.136899] ACPI: EC: EC stopped [38419.136900] PM: Saving platform NVS memory [38419.137100] Disabling non-boot CPUs ... [38419.151758] IRQ 20: no longer affine to CPU1 [38419.151761] IRQ 21: no longer affine to CPU1 [38419.151764] IRQ 23: no longer affine to CPU1 [38419.151769] IRQ 27: no longer affine to CPU1 [38419.151796] IRQ 33: no longer affine to CPU1 [38419.153236] smpboot: CPU 1 is now offline [38419.175745] IRQ 36: no longer affine to CPU2 [38419.176757] smpboot: CPU 2 is now offline [38419.199658] IRQ 8: no longer affine to CPU3 [38419.199661] IRQ 9: no longer affine to CPU3 [38419.199665] IRQ 17: no longer affine to CPU3 [38419.199668] IRQ 18: no longer affine to CPU3 [38419.200693] smpboot: CPU 3 is now offline [38419.202335] ACPI: Low-level resume complete [38419.202373] ACPI: EC: EC started [38419.202374] PM: Restoring platform NVS memory [38419.202584] PCI-DMA: Resuming GART IOMMU [38419.202585] PCI-DMA: Restoring GART aperture settings [38419.202592] LVT offset 0 assigned for vector 0x400 [38419.209194] microcode: CPU0: new patch_level=0x0600063e [38419.209300] Enabling non-boot CPUs ... [38419.209347] x86: Booting SMP configuration: [38419.209347] smpboot: Booting Node 0 Processor 1 APIC 0x11 [38419.212033] cache: parent cpu1 should not be sleeping [38419.212126] microcode: CPU1: patch_level=0x0600063e [38419.212274] CPU1 is up [38419.212311] smpboot: Booting Node 0 Processor 2 APIC 0x12 [38419.221452] cache: parent cpu2 should not be sleeping [38419.221547] microcode: CPU2: patch_level=0x0600063e [38419.221733] CPU2 is up [38419.221750] smpboot: Booting Node 0 Processor 3 APIC 0x13 [38419.224411] cache: parent cpu3 should not be sleeping [38419.224506] microcode: CPU3: patch_level=0x0600063e [38419.224709] CPU3 is up [38419.228616] ACPI: Waking up from system sleep state S3 [38419.229577] ACPI: EC: interrupt unblocked [38419.250550] ACPI: EC: event unblocked [38419.251397] serial 00:06: activated [38419.251511] usb usb8: root hub lost power or was reset [38419.251513] usb usb9: root hub lost power or was reset [38419.262443] sd 0:0:0:0: [sda] Starting disk [38419.262481] sd 2:0:0:0: [sdb] Starting disk [38419.373487] r8169 0000:02:00.0 enp2s0: link down [38419.457356] usb 2-4.4: reset full-speed USB device number 7 using ehci-pci [38419.541293] usb 2-4.4: device descriptor read/64, error -32 [38419.665552] usb 8-2: reset high-speed USB device number 2 using xhci_hcd [38419.737379] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [38419.737619] ata3.00: configured for UDMA/133 [38419.741301] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [38419.742697] ata1.00: configured for UDMA/133 [38419.967608] OOM killer enabled. [38419.967608] Restarting tasks ... done. [38419.987163] PM: suspend exit [38420.170786] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [38420.315460] r8169 0000:02:00.0 enp2s0: link down [38420.315559] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [38420.317733] IPv6: ADDRCONF(NETDEV_UP): wlx7cdd908b43ea: link is not ready [38420.576134] IPv6: ADDRCONF(NETDEV_UP): wlx7cdd908b43ea: link is not ready [38420.641528] IPv6: ADDRCONF(NETDEV_UP): wlx7cdd908b43ea: link is not ready [38422.013292] Bluetooth: hci0: command 0x1001 tx timeout [38423.232458] wlx7cdd908b43ea: authenticate with 20:4e:7f:28:27:84 [38423.265022] wlx7cdd908b43ea: send auth to 20:4e:7f:28:27:84 (try 1/3) [38423.268147] wlx7cdd908b43ea: authenticated [38423.269457] wlx7cdd908b43ea: associate with 20:4e:7f:28:27:84 (try 1/3) [38423.273853] wlx7cdd908b43ea: RX AssocResp from 20:4e:7f:28:27:84 (capab=0x411 status=0 aid=1) [38423.281075] wlx7cdd908b43ea: associated [38423.309968] IPv6: ADDRCONF(NETDEV_CHANGE): wlx7cdd908b43ea: link becomes ready [38430.073340] Bluetooth: hci0: CSR: Local version failed (-110) [38432.093249] Bluetooth: hci0: command 0x1001 tx timeout [38434.055632] r8169 0000:02:00.0 enp2s0: link up [38434.055648] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready [38440.313249] Bluetooth: hci0: CSR: Local version failed (-110) [58221.025532] wlx7cdd908b43ea: deauthenticating from 20:4e:7f:28:27:84 by local choice (Reason: 3=DEAUTH_LEAVING) [58231.679848] PM: suspend entry (deep) [58231.679852] PM: Syncing filesystems ... done. [58232.313292] Freezing user space processes ... (elapsed 0.003 seconds) done. [58232.316631] OOM killer disabled. [58232.316632] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [58232.318114] Suspending console(s) (use no_console_suspend to debug) [58232.318996] serial 00:06: disabled [58232.334774] sd 2:0:0:0: [sdb] Synchronizing SCSI cache [58232.334815] sd 0:0:0:0: [sda] Synchronizing SCSI cache [58232.334817] sd 4:0:0:0: [sdc] Synchronizing SCSI cache [58232.335496] sd 0:0:0:0: [sda] Stopping disk [58232.343599] sd 2:0:0:0: [sdb] Stopping disk [58232.423602] ACPI: EC: interrupt blocked [58232.443179] ACPI: Preparing to enter system sleep state S3 [58232.444028] ACPI: EC: event blocked [58232.444029] ACPI: EC: EC stopped [58232.444030] PM: Saving platform NVS memory [58232.444228] Disabling non-boot CPUs ... [58232.475026] irq_migrate_all_off_this_cpu: 3 callbacks suppressed [58232.475027] IRQ 20: no longer affine to CPU1 [58232.475030] IRQ 21: no longer affine to CPU1 [58232.475037] IRQ 27: no longer affine to CPU1 [58232.475067] IRQ 33: no longer affine to CPU1 [58232.476504] smpboot: CPU 1 is now offline [58232.498993] IRQ 36: no longer affine to CPU2 [58232.500001] smpboot: CPU 2 is now offline [58232.522942] IRQ 19: no longer affine to CPU3 [58232.522956] IRQ 28: no longer affine to CPU3 [58232.522959] IRQ 29: no longer affine to CPU3 [58232.523993] smpboot: CPU 3 is now offline [58232.525614] ACPI: Low-level resume complete [58232.525652] ACPI: EC: EC started [58232.525652] PM: Restoring platform NVS memory [58232.525861] PCI-DMA: Resuming GART IOMMU [58232.525862] PCI-DMA: Restoring GART aperture settings [58232.525869] LVT offset 0 assigned for vector 0x400 [58232.532471] microcode: CPU0: new patch_level=0x0600063e [58232.532592] Enabling non-boot CPUs ... [58232.532649] x86: Booting SMP configuration: [58232.532649] smpboot: Booting Node 0 Processor 1 APIC 0x11 [58232.535341] cache: parent cpu1 should not be sleeping [58232.535439] microcode: CPU1: patch_level=0x0600063e [58232.535584] CPU1 is up [58232.535618] smpboot: Booting Node 0 Processor 2 APIC 0x12 [58232.544754] cache: parent cpu2 should not be sleeping [58232.544846] microcode: CPU2: patch_level=0x0600063e [58232.545028] CPU2 is up [58232.545045] smpboot: Booting Node 0 Processor 3 APIC 0x13 [58232.547705] cache: parent cpu3 should not be sleeping [58232.547802] microcode: CPU3: patch_level=0x0600063e [58232.548006] CPU3 is up [58232.551913] ACPI: Waking up from system sleep state S3 [58232.552895] ACPI: EC: interrupt unblocked [58232.573719] ACPI: EC: event unblocked [58232.574685] serial 00:06: activated [58232.574790] usb usb8: root hub lost power or was reset [58232.574792] usb usb9: root hub lost power or was reset [58232.587431] sd 0:0:0:0: [sda] Starting disk [58232.587485] sd 2:0:0:0: [sdb] Starting disk [58232.711560] r8169 0000:02:00.0 enp2s0: link down [58232.780562] usb 2-4.4: reset full-speed USB device number 7 using ehci-pci [58232.860622] usb 2-4.4: device descriptor read/64, error -32 [58232.988813] usb 8-2: reset high-speed USB device number 2 using xhci_hcd [58233.060620] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [58233.060638] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [58233.060813] ata3.00: configured for UDMA/133 [58233.061932] ata1.00: configured for UDMA/133 [58233.286805] OOM killer enabled. [58233.286806] Restarting tasks ... done. [58233.305311] PM: suspend exit [58233.523026] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [58233.654686] r8169 0000:02:00.0 enp2s0: link down [58233.654824] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [58233.655717] IPv6: ADDRCONF(NETDEV_UP): wlx7cdd908b43ea: link is not ready [58233.927686] IPv6: ADDRCONF(NETDEV_UP): wlx7cdd908b43ea: link is not ready [58233.977908] IPv6: ADDRCONF(NETDEV_UP): wlx7cdd908b43ea: link is not ready [58235.332567] Bluetooth: hci0: command 0x1001 tx timeout [58236.450450] wlx7cdd908b43ea: authenticate with 20:4e:7f:28:27:84 [58236.484118] wlx7cdd908b43ea: send auth to 20:4e:7f:28:27:84 (try 1/3) [58236.485744] wlx7cdd908b43ea: authenticated [58236.489384] wlx7cdd908b43ea: associate with 20:4e:7f:28:27:84 (try 1/3) [58236.492969] wlx7cdd908b43ea: RX AssocResp from 20:4e:7f:28:27:84 (capab=0x411 status=0 aid=1) [58236.499832] wlx7cdd908b43ea: associated [58236.525701] IPv6: ADDRCONF(NETDEV_CHANGE): wlx7cdd908b43ea: link becomes ready [58243.428630] Bluetooth: hci0: CSR: Local version failed (-110) [58245.444644] Bluetooth: hci0: command 0x1001 tx timeout [58246.968493] r8169 0000:02:00.0 enp2s0: link up [58246.968518] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready [58253.668686] Bluetooth: hci0: CSR: Local version failed (-110) [64244.410012] kauditd_printk_skb: 8 callbacks suppressed [64244.410014] audit: type=1400 audit(1553020182.298:147): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/ken/.thunderbird/profiles.ini" pid=30981 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000 [64244.416217] audit: type=1400 audit(1553020182.302:148): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/ken/.thunderbird/w7rfbhkx.default/secmod.db" pid=30981 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000 [64244.419915] audit: type=1400 audit(1553020182.306:149): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/ken/.thunderbird/w7rfbhkx.default/cert8.db" pid=30981 comm="soffice.bin" requested_mask="wr" denied_mask="wr" fsuid=1000 ouid=1000 [64244.419949] audit: type=1400 audit(1553020182.306:150): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/ken/.thunderbird/w7rfbhkx.default/key3.db" pid=30981 comm="soffice.bin" requested_mask="wr" denied_mask="wr" fsuid=1000 ouid=1000 [72278.488235] wlx7cdd908b43ea: deauthenticating from 20:4e:7f:28:27:84 by local choice (Reason: 3=DEAUTH_LEAVING) [72279.251885] PM: suspend entry (deep) [72279.251887] PM: Syncing filesystems ... done. [72280.011085] Freezing user space processes ... (elapsed 0.005 seconds) done. [72280.016512] OOM killer disabled. [72280.016513] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [72280.018194] Suspending console(s) (use no_console_suspend to debug) [72280.018964] serial 00:06: disabled [72280.032814] sd 2:0:0:0: [sdb] Synchronizing SCSI cache [72280.032837] sd 4:0:0:0: [sdc] Synchronizing SCSI cache [72280.040832] sd 0:0:0:0: [sda] Synchronizing SCSI cache [72280.041511] sd 0:0:0:0: [sda] Stopping disk [72280.041648] sd 2:0:0:0: [sdb] Stopping disk [72280.125149] ACPI: EC: interrupt blocked [72280.149220] ACPI: Preparing to enter system sleep state S3 [72280.150096] ACPI: EC: event blocked [72280.150097] ACPI: EC: EC stopped [72280.150097] PM: Saving platform NVS memory [72280.150295] Disabling non-boot CPUs ... [72280.177097] IRQ 20: no longer affine to CPU1 [72280.177100] IRQ 21: no longer affine to CPU1 [72280.177134] IRQ 33: no longer affine to CPU1 [72280.178574] smpboot: CPU 1 is now offline [72280.201062] IRQ 36: no longer affine to CPU2 [72280.202073] smpboot: CPU 2 is now offline [72280.225023] IRQ 19: no longer affine to CPU3 [72280.225033] IRQ 27: no longer affine to CPU3 [72280.225036] IRQ 28: no longer affine to CPU3 [72280.225039] IRQ 29: no longer affine to CPU3 [72280.226075] smpboot: CPU 3 is now offline [72280.227691] ACPI: Low-level resume complete [72280.227729] ACPI: EC: EC started [72280.227730] PM: Restoring platform NVS memory [72280.227942] PCI-DMA: Resuming GART IOMMU [72280.227943] PCI-DMA: Restoring GART aperture settings [72280.227950] LVT offset 0 assigned for vector 0x400 [72280.234552] microcode: CPU0: new patch_level=0x0600063e [72280.234666] Enabling non-boot CPUs ... [72280.234714] x86: Booting SMP configuration: [72280.234714] smpboot: Booting Node 0 Processor 1 APIC 0x11 [72280.237404] cache: parent cpu1 should not be sleeping [72280.237501] microcode: CPU1: patch_level=0x0600063e [72280.237650] CPU1 is up [72280.237688] smpboot: Booting Node 0 Processor 2 APIC 0x12 [72280.246816] cache: parent cpu2 should not be sleeping [72280.246912] microcode: CPU2: patch_level=0x0600063e [72280.247094] CPU2 is up [72280.247111] smpboot: Booting Node 0 Processor 3 APIC 0x13 [72280.249763] cache: parent cpu3 should not be sleeping [72280.249857] microcode: CPU3: patch_level=0x0600063e [72280.250054] CPU3 is up [72280.253963] ACPI: Waking up from system sleep state S3 [72280.254935] ACPI: EC: interrupt unblocked [72280.275879] ACPI: EC: event unblocked [72280.275954] usb usb8: root hub lost power or was reset [72280.275956] usb usb9: root hub lost power or was reset [72280.276616] serial 00:06: activated [72280.337398] sd 0:0:0:0: [sda] Starting disk [72280.338555] sd 2:0:0:0: [sdb] Starting disk [72280.422683] r8169 0000:02:00.0 enp2s0: link down [72280.482692] usb 2-4.4: reset full-speed USB device number 7 using ehci-pci [72280.562626] usb 2-4.4: device descriptor read/64, error -32 [72280.690926] usb 8-2: reset high-speed USB device number 2 using xhci_hcd [72280.810723] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [72280.810749] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [72280.811020] ata3.00: configured for UDMA/133 [72280.812048] ata1.00: configured for UDMA/133 [72280.988882] OOM killer enabled. [72280.988883] Restarting tasks ... done. [72280.995090] PM: suspend exit [72281.248216] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [72281.380915] r8169 0000:02:00.0 enp2s0: link down [72281.381225] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [72281.383800] IPv6: ADDRCONF(NETDEV_UP): wlx7cdd908b43ea: link is not ready [72281.655021] IPv6: ADDRCONF(NETDEV_UP): wlx7cdd908b43ea: link is not ready [72281.692072] IPv6: ADDRCONF(NETDEV_UP): wlx7cdd908b43ea: link is not ready [72283.046717] Bluetooth: hci0: command 0x1001 tx timeout [72284.161137] wlx7cdd908b43ea: authenticate with 20:4e:7f:28:27:84 [72284.193318] wlx7cdd908b43ea: send auth to 20:4e:7f:28:27:84 (try 1/3) [72284.195107] wlx7cdd908b43ea: authenticated [72284.198637] wlx7cdd908b43ea: associate with 20:4e:7f:28:27:84 (try 1/3) [72284.202276] wlx7cdd908b43ea: RX AssocResp from 20:4e:7f:28:27:84 (capab=0x411 status=0 aid=2) [72284.209387] wlx7cdd908b43ea: associated [72284.235074] IPv6: ADDRCONF(NETDEV_CHANGE): wlx7cdd908b43ea: link becomes ready [72291.142624] Bluetooth: hci0: CSR: Local version failed (-110) [72293.158702] Bluetooth: hci0: command 0x1001 tx timeout [72294.657482] r8169 0000:02:00.0 enp2s0: link up [72294.657498] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready [72301.382698] Bluetooth: hci0: CSR: Local version failed (-110) [72763.513800] wlx7cdd908b43ea: deauthenticating from 20:4e:7f:28:27:84 by local choice (Reason: 3=DEAUTH_LEAVING) [72771.394168] IPv6: ADDRCONF(NETDEV_UP): wlx7cdd908b43ea: link is not ready [72771.442562] IPv6: ADDRCONF(NETDEV_UP): wlx7cdd908b43ea: link is not ready [72773.901517] wlx7cdd908b43ea: authenticate with 20:4e:7f:28:27:84 [72773.935411] wlx7cdd908b43ea: send auth to 20:4e:7f:28:27:84 (try 1/3) [72773.936949] wlx7cdd908b43ea: authenticated [72773.938558] wlx7cdd908b43ea: associate with 20:4e:7f:28:27:84 (try 1/3) [72773.942716] wlx7cdd908b43ea: RX AssocResp from 20:4e:7f:28:27:84 (capab=0x411 status=0 aid=2) [72773.950874] wlx7cdd908b43ea: associated [72773.976255] IPv6: ADDRCONF(NETDEV_CHANGE): wlx7cdd908b43ea: link becomes ready [72775.872412] wlx7cdd908b43ea: deauthenticating from 20:4e:7f:28:27:84 by local choice (Reason: 3=DEAUTH_LEAVING) [72777.196628] wlx7cdd908b43ea: authenticate with fc:51:a4:24:4b:ef [72777.227380] wlx7cdd908b43ea: send auth to fc:51:a4:24:4b:ef (try 1/3) [72777.231365] wlx7cdd908b43ea: authenticated [72777.234982] wlx7cdd908b43ea: associate with fc:51:a4:24:4b:ef (try 1/3) [72777.283118] wlx7cdd908b43ea: RX AssocResp from fc:51:a4:24:4b:ef (capab=0x1431 status=0 aid=1) [72777.290433] wlx7cdd908b43ea: associated [72778.310143] wlx7cdd908b43ea: Limiting TX power to 30 (30 - 0) dBm as advertised by fc:51:a4:24:4b:ef [72781.331029] wlx7cdd908b43ea: deauthenticated from fc:51:a4:24:4b:ef (Reason: 2=PREV_AUTH_NOT_VALID) [72848.170026] wlx7cdd908b43ea: authenticate with fc:51:a4:24:4b:ef [72848.205737] wlx7cdd908b43ea: send auth to fc:51:a4:24:4b:ef (try 1/3) [72848.208334] wlx7cdd908b43ea: authenticated [72848.214510] wlx7cdd908b43ea: associate with fc:51:a4:24:4b:ef (try 1/3) [72848.222955] wlx7cdd908b43ea: RX AssocResp from fc:51:a4:24:4b:ef (capab=0x1431 status=0 aid=1) [72848.230034] wlx7cdd908b43ea: associated [72849.682816] wlx7cdd908b43ea: Limiting TX power to 30 (30 - 0) dBm as advertised by fc:51:a4:24:4b:ef [72852.266578] wlx7cdd908b43ea: deauthenticated from fc:51:a4:24:4b:ef (Reason: 2=PREV_AUTH_NOT_VALID) [72870.214093] r8169 0000:02:00.0 enp2s0: link down [72972.356356] IPv6: ADDRCONF(NETDEV_UP): wlx7cdd908b43ea: link is not ready [72998.113097] IPv6: ADDRCONF(NETDEV_UP): wlx7cdd908b43ea: link is not ready [72999.333779] wlx7cdd908b43ea: authenticate with 0e:51:a4:24:4b:ef [72999.366715] wlx7cdd908b43ea: send auth to 0e:51:a4:24:4b:ef (try 1/3) [72999.372890] wlx7cdd908b43ea: authenticated [72999.374637] wlx7cdd908b43ea: associate with 0e:51:a4:24:4b:ef (try 1/3) [72999.378030] wlx7cdd908b43ea: RX AssocResp from 0e:51:a4:24:4b:ef (capab=0x421 status=1 aid=10639) [72999.378032] wlx7cdd908b43ea: 0e:51:a4:24:4b:ef denied association (code=1) [73000.664939] wlx7cdd908b43ea: authenticate with 6e:e3:0e:d1:09:3a [73000.697533] wlx7cdd908b43ea: send auth to 6e:e3:0e:d1:09:3a (try 1/3) [73000.700144] wlx7cdd908b43ea: authenticated [73000.702891] wlx7cdd908b43ea: associate with 6e:e3:0e:d1:09:3a (try 1/3) [73000.706385] wlx7cdd908b43ea: RX AssocResp from 6e:e3:0e:d1:09:3a (capab=0x421 status=0 aid=1) [73000.718598] wlx7cdd908b43ea: associated [73000.719106] IPv6: ADDRCONF(NETDEV_CHANGE): wlx7cdd908b43ea: link becomes ready [73007.789012] wlx7cdd908b43ea: authenticate with 5e:be:f7:df:d7:38 [73007.820053] wlx7cdd908b43ea: send auth to 5e:be:f7:df:d7:38 (try 1/3) [73007.825314] wlx7cdd908b43ea: authenticated [73007.826604] wlx7cdd908b43ea: associate with 5e:be:f7:df:d7:38 (try 1/3) [73007.830323] wlx7cdd908b43ea: RX AssocResp from 5e:be:f7:df:d7:38 (capab=0x421 status=0 aid=3) [73007.837651] wlx7cdd908b43ea: associated [73046.157515] wlx7cdd908b43ea: deauthenticating from 5e:be:f7:df:d7:38 by local choice (Reason: 3=DEAUTH_LEAVING) [73047.092359] wlx7cdd908b43ea: authenticate with ae:34:26:74:fb:6e [73047.110985] wlx7cdd908b43ea: send auth to ae:34:26:74:fb:6e (try 1/3) [73047.214640] wlx7cdd908b43ea: send auth to ae:34:26:74:fb:6e (try 2/3) [73047.217326] wlx7cdd908b43ea: authenticated [73047.218691] wlx7cdd908b43ea: associate with ae:34:26:74:fb:6e (try 1/3) [73047.222080] wlx7cdd908b43ea: RX AssocResp from ae:34:26:74:fb:6e (capab=0x421 status=0 aid=2) [73047.229574] wlx7cdd908b43ea: associated [73049.701357] wlx7cdd908b43ea: authenticate with 5e:be:f7:df:d7:38 [73049.735670] wlx7cdd908b43ea: send auth to 5e:be:f7:df:d7:38 (try 1/3) [73049.738258] wlx7cdd908b43ea: authenticated [73049.738657] wlx7cdd908b43ea: associate with 5e:be:f7:df:d7:38 (try 1/3) [73049.742660] wlx7cdd908b43ea: RX AssocResp from 5e:be:f7:df:d7:38 (capab=0x421 status=0 aid=3) [73049.750099] wlx7cdd908b43ea: associated [73092.156049] wlx7cdd908b43ea: deauthenticating from 5e:be:f7:df:d7:38 by local choice (Reason: 3=DEAUTH_LEAVING) [73093.473848] wlx7cdd908b43ea: authenticate with 5e:be:f7:df:d7:38 [73093.505873] wlx7cdd908b43ea: send auth to 5e:be:f7:df:d7:38 (try 1/3) [73093.509346] wlx7cdd908b43ea: authenticated [73093.512522] wlx7cdd908b43ea: associate with 5e:be:f7:df:d7:38 (try 1/3) [73093.518943] wlx7cdd908b43ea: RX AssocResp from 5e:be:f7:df:d7:38 (capab=0x421 status=0 aid=3) [73093.525822] wlx7cdd908b43ea: associated [73139.189654] wlx7cdd908b43ea: deauthenticating from 5e:be:f7:df:d7:38 by local choice (Reason: 3=DEAUTH_LEAVING) [73140.236462] wlx7cdd908b43ea: authenticate with 5e:be:f7:df:d7:38 [73140.257818] wlx7cdd908b43ea: send auth to 5e:be:f7:df:d7:38 (try 1/3) [73140.261005] wlx7cdd908b43ea: authenticated [73140.266800] wlx7cdd908b43ea: associate with 5e:be:f7:df:d7:38 (try 1/3) [73140.272019] wlx7cdd908b43ea: RX AssocResp from 5e:be:f7:df:d7:38 (capab=0x421 status=0 aid=3) [73140.279125] wlx7cdd908b43ea: associated [73173.978113] wlx7cdd908b43ea: authenticate with ae:34:26:74:fb:6e [73174.010085] wlx7cdd908b43ea: send auth to ae:34:26:74:fb:6e (try 1/3) [73174.072436] wlx7cdd908b43ea: authenticated [73174.074877] wlx7cdd908b43ea: associate with ae:34:26:74:fb:6e (try 1/3) [73174.083907] wlx7cdd908b43ea: RX AssocResp from ae:34:26:74:fb:6e (capab=0x421 status=0 aid=2) [73174.090783] wlx7cdd908b43ea: associated [73175.705377] wlx7cdd908b43ea: authenticate with 5e:be:f7:df:d7:38 [73175.738228] wlx7cdd908b43ea: send auth to 5e:be:f7:df:d7:38 (try 1/3) [73175.741711] wlx7cdd908b43ea: authenticated [73175.743125] wlx7cdd908b43ea: associate with 5e:be:f7:df:d7:38 (try 1/3) [73175.749944] wlx7cdd908b43ea: RX AssocResp from 5e:be:f7:df:d7:38 (capab=0x421 status=0 aid=1) [73175.756917] wlx7cdd908b43ea: associated [73185.149938] wlx7cdd908b43ea: deauthenticating from 5e:be:f7:df:d7:38 by local choice (Reason: 3=DEAUTH_LEAVING) [73454.289179] r8169 0000:02:00.0 enp2s0: link up [73463.929617] r8169 0000:02:00.0 enp2s0: link down [73477.252871] r8169 0000:02:00.0 enp2s0: link up [73486.346714] wlx7cdd908b43ea: authenticate with 0e:51:a4:24:4b:ef [73486.380224] wlx7cdd908b43ea: send auth to 0e:51:a4:24:4b:ef (try 1/3) [73486.390451] wlx7cdd908b43ea: authenticated [73486.391627] wlx7cdd908b43ea: associate with 0e:51:a4:24:4b:ef (try 1/3) [73486.394313] wlx7cdd908b43ea: RX AssocResp from 0e:51:a4:24:4b:ef (capab=0x421 status=1 aid=0) [73486.394319] wlx7cdd908b43ea: 0e:51:a4:24:4b:ef denied association (code=1) [73486.617631] wlx7cdd908b43ea: authenticate with 5e:be:f7:df:d7:38 [73486.649558] wlx7cdd908b43ea: send auth to 5e:be:f7:df:d7:38 (try 1/3) [73486.654918] wlx7cdd908b43ea: authenticated [73486.655676] wlx7cdd908b43ea: associate with 5e:be:f7:df:d7:38 (try 1/3) [73486.712416] wlx7cdd908b43ea: associate with 5e:be:f7:df:d7:38 (try 2/3) [73486.770280] wlx7cdd908b43ea: associate with 5e:be:f7:df:d7:38 (try 3/3) [73486.801665] wlx7cdd908b43ea: association with 5e:be:f7:df:d7:38 timed out [73488.147257] wlx7cdd908b43ea: authenticate with 0e:51:a4:24:4b:ef [73488.178991] wlx7cdd908b43ea: send auth to 0e:51:a4:24:4b:ef (try 1/3) [73488.183561] wlx7cdd908b43ea: authenticated [73488.188032] wlx7cdd908b43ea: associate with 0e:51:a4:24:4b:ef (try 1/3) [73488.196682] wlx7cdd908b43ea: deauthenticated from 0e:51:a4:24:4b:ef while associating (Reason: 9=STA_REQ_ASSOC_WITHOUT_AUTH) [73488.485969] wlx7cdd908b43ea: authenticate with ae:34:26:74:fb:6e [73488.504778] wlx7cdd908b43ea: send auth to ae:34:26:74:fb:6e (try 1/3) [73488.508057] wlx7cdd908b43ea: authenticated [73488.511943] wlx7cdd908b43ea: associate with ae:34:26:74:fb:6e (try 1/3) [73488.522093] wlx7cdd908b43ea: RX AssocResp from ae:34:26:74:fb:6e (capab=0x421 status=0 aid=2) [73488.529265] wlx7cdd908b43ea: associated [73492.830974] wlx7cdd908b43ea: authenticate with 6e:e3:0e:d1:09:3a [73492.860981] wlx7cdd908b43ea: send auth to 6e:e3:0e:d1:09:3a (try 1/3) [73492.963513] wlx7cdd908b43ea: send auth to 6e:e3:0e:d1:09:3a (try 2/3) [73493.079627] wlx7cdd908b43ea: send auth to 6e:e3:0e:d1:09:3a (try 3/3) [73493.187567] wlx7cdd908b43ea: authentication with 6e:e3:0e:d1:09:3a timed out [73493.410180] wlx7cdd908b43ea: authenticate with 5e:be:f7:df:d7:38 [73493.441002] wlx7cdd908b43ea: send auth to 5e:be:f7:df:d7:38 (try 1/3) [73493.551560] wlx7cdd908b43ea: send auth to 5e:be:f7:df:d7:38 (try 2/3) [73493.663625] wlx7cdd908b43ea: send auth to 5e:be:f7:df:d7:38 (try 3/3) [73493.668860] wlx7cdd908b43ea: authenticated [73493.671501] wlx7cdd908b43ea: associate with 5e:be:f7:df:d7:38 (try 1/3) [73493.681677] wlx7cdd908b43ea: RX AssocResp from 5e:be:f7:df:d7:38 (capab=0x421 status=0 aid=1) [73493.688834] wlx7cdd908b43ea: associated [73534.135318] wlx7cdd908b43ea: deauthenticating from 5e:be:f7:df:d7:38 by local choice (Reason: 3=DEAUTH_LEAVING) [73535.450376] wlx7cdd908b43ea: authenticate with 20:4e:7f:28:27:84 [73535.481096] wlx7cdd908b43ea: send auth to 20:4e:7f:28:27:84 (try 1/3) [73535.483034] wlx7cdd908b43ea: authenticated [73535.483820] wlx7cdd908b43ea: associate with 20:4e:7f:28:27:84 (try 1/3) [73535.489823] wlx7cdd908b43ea: RX AssocResp from 20:4e:7f:28:27:84 (capab=0x411 status=0 aid=2) [73535.497654] wlx7cdd908b43ea: associated [92541.951968] wlx7cdd908b43ea: deauthenticating from 20:4e:7f:28:27:84 by local choice (Reason: 3=DEAUTH_LEAVING) [92552.875029] PM: suspend entry (deep) [92552.875031] PM: Syncing filesystems ... done. [92553.618010] Freezing user space processes ... (elapsed 0.003 seconds) done. [92553.621704] OOM killer disabled. [92553.621704] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [92553.623405] Suspending console(s) (use no_console_suspend to debug) [92553.624647] serial 00:06: disabled [92553.637723] sd 4:0:0:0: [sdc] Synchronizing SCSI cache [92553.637746] sd 0:0:0:0: [sda] Synchronizing SCSI cache [92553.637747] sd 2:0:0:0: [sdb] Synchronizing SCSI cache [92553.638424] sd 0:0:0:0: [sda] Stopping disk [92553.646577] sd 2:0:0:0: [sdb] Stopping disk [92553.731414] ACPI: EC: interrupt blocked [92553.750158] ACPI: Preparing to enter system sleep state S3 [92553.751018] ACPI: EC: event blocked [92553.751019] ACPI: EC: EC stopped [92553.751020] PM: Saving platform NVS memory [92553.751217] Disabling non-boot CPUs ... [92553.770041] IRQ 33: no longer affine to CPU1 [92553.771486] smpboot: CPU 1 is now offline [92553.794002] IRQ 36: no longer affine to CPU2 [92553.795014] smpboot: CPU 2 is now offline [92553.817934] IRQ 19: no longer affine to CPU3 [92553.817937] IRQ 20: no longer affine to CPU3 [92553.817940] IRQ 21: no longer affine to CPU3 [92553.817945] IRQ 27: no longer affine to CPU3 [92553.817948] IRQ 28: no longer affine to CPU3 [92553.817952] IRQ 29: no longer affine to CPU3 [92553.818987] smpboot: CPU 3 is now offline [92553.820603] ACPI: Low-level resume complete [92553.820640] ACPI: EC: EC started [92553.820641] PM: Restoring platform NVS memory [92553.820851] PCI-DMA: Resuming GART IOMMU [92553.820852] PCI-DMA: Restoring GART aperture settings [92553.820859] LVT offset 0 assigned for vector 0x400 [92553.827460] microcode: CPU0: new patch_level=0x0600063e [92553.827544] Enabling non-boot CPUs ... [92553.827600] x86: Booting SMP configuration: [92553.827601] smpboot: Booting Node 0 Processor 1 APIC 0x11 [92553.830303] cache: parent cpu1 should not be sleeping [92553.830401] microcode: CPU1: patch_level=0x0600063e [92553.830546] CPU1 is up [92553.830580] smpboot: Booting Node 0 Processor 2 APIC 0x12 [92553.839716] cache: parent cpu2 should not be sleeping [92553.839814] microcode: CPU2: patch_level=0x0600063e [92553.839996] CPU2 is up [92553.840014] smpboot: Booting Node 0 Processor 3 APIC 0x13 [92553.842678] cache: parent cpu3 should not be sleeping [92553.842774] microcode: CPU3: patch_level=0x0600063e [92553.842979] CPU3 is up [92553.846895] ACPI: Waking up from system sleep state S3 [92553.847869] ACPI: EC: interrupt unblocked [92553.868656] ACPI: EC: event unblocked [92553.868741] usb usb8: root hub lost power or was reset [92553.868743] usb usb9: root hub lost power or was reset [92553.869397] serial 00:06: activated [92553.935690] sd 0:0:0:0: [sda] Starting disk [92553.935730] sd 2:0:0:0: [sdb] Starting disk [92553.990518] r8169 0000:02:00.0 enp2s0: link down [92554.103604] usb 2-4.4: reset full-speed USB device number 7 using ehci-pci [92554.183630] usb 2-4.4: device descriptor read/64, error -32 [92554.283853] usb 8-2: reset high-speed USB device number 2 using xhci_hcd [92554.403653] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [92554.403705] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [92554.403918] ata3.00: configured for UDMA/133 [92554.404952] ata1.00: configured for UDMA/133 [92554.609864] OOM killer enabled. [92554.609865] Restarting tasks ... done. [92554.622435] PM: suspend exit [92554.820929] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [92554.969647] r8169 0000:02:00.0 enp2s0: link down [92554.969717] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [92554.970517] IPv6: ADDRCONF(NETDEV_UP): wlx7cdd908b43ea: link is not ready [92555.232444] IPv6: ADDRCONF(NETDEV_UP): wlx7cdd908b43ea: link is not ready [92555.294374] IPv6: ADDRCONF(NETDEV_UP): wlx7cdd908b43ea: link is not ready [92556.659541] Bluetooth: hci0: command 0x1001 tx timeout [92557.749674] wlx7cdd908b43ea: authenticate with 20:4e:7f:28:27:84 [92557.782552] wlx7cdd908b43ea: send auth to 20:4e:7f:28:27:84 (try 1/3) [92557.784179] wlx7cdd908b43ea: authenticated [92557.787553] wlx7cdd908b43ea: associate with 20:4e:7f:28:27:84 (try 1/3) [92557.791148] wlx7cdd908b43ea: RX AssocResp from 20:4e:7f:28:27:84 (capab=0x411 status=0 aid=1) [92557.798281] wlx7cdd908b43ea: associated [92557.827699] IPv6: ADDRCONF(NETDEV_CHANGE): wlx7cdd908b43ea: link becomes ready [92564.755499] Bluetooth: hci0: CSR: Local version failed (-110) [92566.771483] Bluetooth: hci0: command 0x1001 tx timeout [92568.298214] r8169 0000:02:00.0 enp2s0: link up [92568.298230] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready [92574.995488] Bluetooth: hci0: CSR: Local version failed (-110) [106394.990728] wlx7cdd908b43ea: deauthenticating from 20:4e:7f:28:27:84 by local choice (Reason: 3=DEAUTH_LEAVING) [106405.725035] PM: suspend entry (deep) [106405.725038] PM: Syncing filesystems ... done. [106406.425224] Freezing user space processes ... (elapsed 0.003 seconds) done. [106406.429106] OOM killer disabled. [106406.429107] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [106406.430688] Suspending console(s) (use no_console_suspend to debug) [106406.431554] serial 00:06: disabled [106406.448674] sd 4:0:0:0: [sdc] Synchronizing SCSI cache [106406.448709] sd 2:0:0:0: [sdb] Synchronizing SCSI cache [106406.448711] sd 0:0:0:0: [sda] Synchronizing SCSI cache [106406.449754] sd 0:0:0:0: [sda] Stopping disk [106406.457544] sd 2:0:0:0: [sdb] Stopping disk [106406.537461] ACPI: EC: interrupt blocked [106406.557127] ACPI: Preparing to enter system sleep state S3 [106406.557979] ACPI: EC: event blocked [106406.557980] ACPI: EC: EC stopped [106406.557981] PM: Saving platform NVS memory [106406.558178] Disabling non-boot CPUs ... [106406.572989] IRQ 20: no longer affine to CPU1 [106406.572995] IRQ 27: no longer affine to CPU1 [106406.573025] IRQ 33: no longer affine to CPU1 [106406.574458] smpboot: CPU 1 is now offline [106406.596963] IRQ 36: no longer affine to CPU2 [106406.597970] smpboot: CPU 2 is now offline [106406.620902] IRQ 19: no longer affine to CPU3 [106406.620908] IRQ 21: no longer affine to CPU3 [106406.620915] IRQ 28: no longer affine to CPU3 [106406.620919] IRQ 29: no longer affine to CPU3 [106406.621951] smpboot: CPU 3 is now offline [106406.623581] ACPI: Low-level resume complete [106406.623619] ACPI: EC: EC started [106406.623619] PM: Restoring platform NVS memory [106406.623827] PCI-DMA: Resuming GART IOMMU [106406.623828] PCI-DMA: Restoring GART aperture settings [106406.623835] LVT offset 0 assigned for vector 0x400 [106406.630436] microcode: CPU0: new patch_level=0x0600063e [106406.630529] Enabling non-boot CPUs ... [106406.630577] x86: Booting SMP configuration: [106406.630578] smpboot: Booting Node 0 Processor 1 APIC 0x11 [106406.633259] cache: parent cpu1 should not be sleeping [106406.633352] microcode: CPU1: patch_level=0x0600063e [106406.633496] CPU1 is up [106406.633540] smpboot: Booting Node 0 Processor 2 APIC 0x12 [106406.642682] cache: parent cpu2 should not be sleeping [106406.642778] microcode: CPU2: patch_level=0x0600063e [106406.642959] CPU2 is up [106406.642976] smpboot: Booting Node 0 Processor 3 APIC 0x13 [106406.645632] cache: parent cpu3 should not be sleeping [106406.645732] microcode: CPU3: patch_level=0x0600063e [106406.645933] CPU3 is up [106406.649836] ACPI: Waking up from system sleep state S3 [106406.650798] ACPI: EC: interrupt unblocked [106406.671585] ACPI: EC: event unblocked [106406.672438] serial 00:06: activated [106406.672578] usb usb8: root hub lost power or was reset [106406.672580] usb usb9: root hub lost power or was reset [106406.685334] sd 0:0:0:0: [sda] Starting disk [106406.685368] sd 2:0:0:0: [sdb] Starting disk [106406.809021] r8169 0000:02:00.0 enp2s0: link down [106406.882580] usb 2-4.4: reset full-speed USB device number 7 using ehci-pci [106406.962508] usb 2-4.4: device descriptor read/64, error -32 [106407.086734] usb 8-2: reset high-speed USB device number 2 using xhci_hcd [106407.158604] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [106407.158630] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [106407.158839] ata3.00: configured for UDMA/133 [106407.159925] ata1.00: configured for UDMA/133 [106407.388795] OOM killer enabled. [106407.388795] Restarting tasks ... done. [106407.406693] PM: suspend exit [106407.609757] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [106407.752634] r8169 0000:02:00.0 enp2s0: link down [106407.752877] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [106407.753693] IPv6: ADDRCONF(NETDEV_UP): wlx7cdd908b43ea: link is not ready [106408.019184] IPv6: ADDRCONF(NETDEV_UP): wlx7cdd908b43ea: link is not ready [106408.072050] IPv6: ADDRCONF(NETDEV_UP): wlx7cdd908b43ea: link is not ready [106409.426532] Bluetooth: hci0: command 0x1001 tx timeout [106410.549553] wlx7cdd908b43ea: authenticate with 20:4e:7f:28:27:84 [106410.582115] wlx7cdd908b43ea: send auth to 20:4e:7f:28:27:84 (try 1/3) [106410.584334] wlx7cdd908b43ea: authenticated [106410.586633] wlx7cdd908b43ea: associate with 20:4e:7f:28:27:84 (try 1/3) [106410.590742] wlx7cdd908b43ea: RX AssocResp from 20:4e:7f:28:27:84 (capab=0x411 status=0 aid=1) [106410.598050] wlx7cdd908b43ea: associated [106410.623734] IPv6: ADDRCONF(NETDEV_CHANGE): wlx7cdd908b43ea: link becomes ready [106417.650507] Bluetooth: hci0: CSR: Local version failed (-110) [106419.666511] Bluetooth: hci0: command 0x1001 tx timeout [106421.325150] r8169 0000:02:00.0 enp2s0: link up [106421.325164] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready [106427.890562] Bluetooth: hci0: CSR: Local version failed (-110) [108817.383935] wlx7cdd908b43ea: deauthenticating from 20:4e:7f:28:27:84 by local choice (Reason: 3=DEAUTH_LEAVING) [108818.186250] PM: suspend entry (deep) [108818.186253] PM: Syncing filesystems ... done. [108818.941024] Freezing user space processes ... (elapsed 0.005 seconds) done. [108818.946456] OOM killer disabled. [108818.946457] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [108818.947930] Suspending console(s) (use no_console_suspend to debug) [108818.948779] serial 00:06: disabled [108818.962200] sd 4:0:0:0: [sdc] Synchronizing SCSI cache [108818.962221] sd 0:0:0:0: [sda] Synchronizing SCSI cache [108818.962241] sd 2:0:0:0: [sdb] Synchronizing SCSI cache [108818.962908] sd 0:0:0:0: [sda] Stopping disk [108818.971063] sd 2:0:0:0: [sdb] Stopping disk [108819.054364] ACPI: EC: interrupt blocked [108819.074653] ACPI: Preparing to enter system sleep state S3 [108819.075506] ACPI: EC: event blocked [108819.075507] ACPI: EC: EC stopped [108819.075507] PM: Saving platform NVS memory [108819.075706] Disabling non-boot CPUs ... [108819.090490] IRQ 20: no longer affine to CPU1 [108819.090493] IRQ 21: no longer affine to CPU1 [108819.090499] IRQ 27: no longer affine to CPU1 [108819.090529] IRQ 33: no longer affine to CPU1 [108819.091972] smpboot: CPU 1 is now offline [108819.114459] IRQ 36: no longer affine to CPU2 [108819.115469] smpboot: CPU 2 is now offline [108819.138414] IRQ 19: no longer affine to CPU3 [108819.138427] IRQ 28: no longer affine to CPU3 [108819.138430] IRQ 29: no longer affine to CPU3 [108819.139466] smpboot: CPU 3 is now offline [108819.141095] ACPI: Low-level resume complete [108819.141133] ACPI: EC: EC started [108819.141134] PM: Restoring platform NVS memory [108819.141344] PCI-DMA: Resuming GART IOMMU [108819.141344] PCI-DMA: Restoring GART aperture settings [108819.141351] LVT offset 0 assigned for vector 0x400 [108819.147954] microcode: CPU0: new patch_level=0x0600063e [108819.148063] Enabling non-boot CPUs ... [108819.148120] x86: Booting SMP configuration: [108819.148121] smpboot: Booting Node 0 Processor 1 APIC 0x11 [108819.150817] cache: parent cpu1 should not be sleeping [108819.150912] microcode: CPU1: patch_level=0x0600063e [108819.151054] CPU1 is up [108819.151087] smpboot: Booting Node 0 Processor 2 APIC 0x12 [108819.160219] cache: parent cpu2 should not be sleeping [108819.160318] microcode: CPU2: patch_level=0x0600063e [108819.160497] CPU2 is up [108819.160514] smpboot: Booting Node 0 Processor 3 APIC 0x13 [108819.163171] cache: parent cpu3 should not be sleeping [108819.163268] microcode: CPU3: patch_level=0x0600063e [108819.163463] CPU3 is up [108819.167372] ACPI: Waking up from system sleep state S3 [108819.168337] ACPI: EC: interrupt unblocked [108819.189194] ACPI: EC: event unblocked [108819.192773] serial 00:06: activated [108819.192877] usb usb8: root hub lost power or was reset [108819.192878] usb usb9: root hub lost power or was reset [108819.212554] sd 0:0:0:0: [sda] Starting disk [108819.212589] sd 2:0:0:0: [sdb] Starting disk [108819.329245] r8169 0000:02:00.0 enp2s0: link down [108819.431950] usb 2-4.4: reset full-speed USB device number 7 using ehci-pci [108819.512032] usb 2-4.4: device descriptor read/64, error -32 [108819.608229] usb 8-2: reset high-speed USB device number 2 using xhci_hcd [108819.684062] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [108819.684274] ata3.00: configured for UDMA/133 [108819.687925] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [108819.689231] ata1.00: configured for UDMA/133 [108819.938008] OOM killer enabled. [108819.938009] Restarting tasks ... done. [108819.955964] PM: suspend exit [108820.131989] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [108820.274003] r8169 0000:02:00.0 enp2s0: link down [108820.274096] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [108820.275931] IPv6: ADDRCONF(NETDEV_UP): wlx7cdd908b43ea: link is not ready [108820.549223] IPv6: ADDRCONF(NETDEV_UP): wlx7cdd908b43ea: link is not ready [108820.609219] IPv6: ADDRCONF(NETDEV_UP): wlx7cdd908b43ea: link is not ready [108821.991425] Bluetooth: hci0: command 0x1001 tx timeout [108823.194451] wlx7cdd908b43ea: authenticate with 20:4e:7f:28:27:84 [108823.227332] wlx7cdd908b43ea: send auth to 20:4e:7f:28:27:84 (try 1/3) [108823.234927] wlx7cdd908b43ea: authenticated [108823.243177] wlx7cdd908b43ea: associate with 20:4e:7f:28:27:84 (try 1/3) [108823.247193] wlx7cdd908b43ea: RX AssocResp from 20:4e:7f:28:27:84 (capab=0x411 status=0 aid=1) [108823.254515] wlx7cdd908b43ea: associated [108823.291941] IPv6: ADDRCONF(NETDEV_CHANGE): wlx7cdd908b43ea: link becomes ready [108830.049906] Bluetooth: hci0: CSR: Local version failed (-110) [108832.065413] Bluetooth: hci0: command 0x1001 tx timeout [108833.509789] r8169 0000:02:00.0 enp2s0: link up [108833.509805] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready [108840.287901] Bluetooth: hci0: CSR: Local version failed (-110) [113070.153030] wlx7cdd908b43ea: deauthenticating from 20:4e:7f:28:27:84 by local choice (Reason: 3=DEAUTH_LEAVING) [113070.814838] PM: suspend entry (deep) [113070.814840] PM: Syncing filesystems ... done. [113071.509924] Freezing user space processes ... (elapsed 0.003 seconds) done. [113071.513465] OOM killer disabled. [113071.513465] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [113071.514709] Suspending console(s) (use no_console_suspend to debug) [113071.515503] serial 00:06: disabled [113071.530459] sd 2:0:0:0: [sdb] Synchronizing SCSI cache [113071.530531] sd 4:0:0:0: [sdc] Synchronizing SCSI cache [113071.538528] sd 0:0:0:0: [sda] Synchronizing SCSI cache [113071.539216] sd 0:0:0:0: [sda] Stopping disk [113071.539286] sd 2:0:0:0: [sdb] Stopping disk [113071.620664] ACPI: EC: interrupt blocked [113071.638941] ACPI: Preparing to enter system sleep state S3 [113071.639798] ACPI: EC: event blocked [113071.639799] ACPI: EC: EC stopped [113071.639800] PM: Saving platform NVS memory [113071.639996] Disabling non-boot CPUs ... [113071.662787] IRQ 21: no longer affine to CPU1 [113071.662793] IRQ 27: no longer affine to CPU1 [113071.662825] IRQ 33: no longer affine to CPU1 [113071.664266] smpboot: CPU 1 is now offline [113071.686785] IRQ 36: no longer affine to CPU2 [113071.687796] smpboot: CPU 2 is now offline [113071.710717] IRQ 19: no longer affine to CPU3 [113071.710720] IRQ 20: no longer affine to CPU3 [113071.710731] IRQ 28: no longer affine to CPU3 [113071.710734] IRQ 29: no longer affine to CPU3 [113071.711769] smpboot: CPU 3 is now offline [113071.713443] ACPI: Low-level resume complete [113071.713482] ACPI: EC: EC started [113071.713482] PM: Restoring platform NVS memory [113071.713693] PCI-DMA: Resuming GART IOMMU [113071.713693] PCI-DMA: Restoring GART aperture settings [113071.713700] LVT offset 0 assigned for vector 0x400 [113071.720303] microcode: CPU0: new patch_level=0x0600063e [113071.720410] Enabling non-boot CPUs ... [113071.720458] x86: Booting SMP configuration: [113071.720458] smpboot: Booting Node 0 Processor 1 APIC 0x11 [113071.723156] cache: parent cpu1 should not be sleeping [113071.723250] microcode: CPU1: patch_level=0x0600063e [113071.723396] CPU1 is up [113071.723434] smpboot: Booting Node 0 Processor 2 APIC 0x12 [113071.732560] cache: parent cpu2 should not be sleeping [113071.732657] microcode: CPU2: patch_level=0x0600063e [113071.732844] CPU2 is up [113071.732860] smpboot: Booting Node 0 Processor 3 APIC 0x13 [113071.735518] cache: parent cpu3 should not be sleeping [113071.735616] microcode: CPU3: patch_level=0x0600063e [113071.735817] CPU3 is up [113071.739726] ACPI: Waking up from system sleep state S3 [113071.740721] ACPI: EC: interrupt unblocked [113071.761500] ACPI: EC: event unblocked [113071.762181] serial 00:06: activated [113071.762334] usb usb8: root hub lost power or was reset [113071.762335] usb usb9: root hub lost power or was reset [113071.779020] sd 0:0:0:0: [sda] Starting disk [113071.779057] sd 2:0:0:0: [sdb] Starting disk [113071.898870] r8169 0000:02:00.0 enp2s0: link down [113071.968385] usb 2-4.4: reset full-speed USB device number 7 using ehci-pci [113072.048406] usb 2-4.4: device descriptor read/64, error -32 [113072.176537] usb 8-2: reset high-speed USB device number 2 using xhci_hcd [113072.252405] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [113072.252433] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [113072.252644] ata3.00: configured for UDMA/133 [113072.253730] ata1.00: configured for UDMA/133 [113072.474652] OOM killer enabled. [113072.474653] Restarting tasks ... done. [113072.494177] PM: suspend exit [113072.667240] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [113072.794538] r8169 0000:02:00.0 enp2s0: link down [113072.794839] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [113072.797151] IPv6: ADDRCONF(NETDEV_UP): wlx7cdd908b43ea: link is not ready [113073.055507] IPv6: ADDRCONF(NETDEV_UP): wlx7cdd908b43ea: link is not ready [113073.130407] IPv6: ADDRCONF(NETDEV_UP): wlx7cdd908b43ea: link is not ready [113074.512325] Bluetooth: hci0: command 0x1001 tx timeout [113075.727386] wlx7cdd908b43ea: authenticate with 20:4e:7f:28:27:84 [113075.761458] wlx7cdd908b43ea: send auth to 20:4e:7f:28:27:84 (try 1/3) [113075.764006] wlx7cdd908b43ea: authenticated [113075.768320] wlx7cdd908b43ea: associate with 20:4e:7f:28:27:84 (try 1/3) [113075.771909] wlx7cdd908b43ea: RX AssocResp from 20:4e:7f:28:27:84 (capab=0x411 status=0 aid=1) [113075.778768] wlx7cdd908b43ea: associated [113075.805586] IPv6: ADDRCONF(NETDEV_CHANGE): wlx7cdd908b43ea: link becomes ready [113082.608282] Bluetooth: hci0: CSR: Local version failed (-110) [113084.624381] Bluetooth: hci0: command 0x1001 tx timeout [113086.060050] r8169 0000:02:00.0 enp2s0: link up [113086.060066] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready [113092.848198] Bluetooth: hci0: CSR: Local version failed (-110) [114301.441984] wlx7cdd908b43ea: authenticate with 20:4e:7f:28:27:84 [114301.474652] wlx7cdd908b43ea: send auth to 20:4e:7f:28:27:84 (try 1/3) [114301.476137] wlx7cdd908b43ea: authenticated [114301.480036] wlx7cdd908b43ea: associate with 20:4e:7f:28:27:84 (try 1/3) [114301.483673] wlx7cdd908b43ea: RX AssocResp from 20:4e:7f:28:27:84 (capab=0x411 status=0 aid=1) [114301.490743] wlx7cdd908b43ea: associated [140062.863645] ata3: exception Emask 0x10 SAct 0x0 SErr 0x90202 action 0xe frozen [140062.863649] ata3: irq_stat 0x00400000, PHY RDY changed [140062.863651] ata3: SError: { RecovComm Persist PHYRdyChg 10B8B } [140062.863655] ata3: hard resetting link [140063.734144] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [140063.734360] ata3.00: configured for UDMA/133 [140063.734364] ata3: EH complete [140435.155848] r8169 0000:02:00.0: invalid large VPD tag 7f at offset 0