[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.16.0-38-generic (buildd@aatxe) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #52~14.04.1-Ubuntu SMP Fri May 8 09:44:48 UTC 2015 (Ubuntu 3.16.0-38.52~14.04.1-generic 3.16.7-ckt10) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003ffeffff] usable [ 0.000000] BIOS-e820: [mem 0x000000003fff0000-0x000000003fff2fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000003fff3000-0x000000003fffffff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000d0000000-0x00000000dfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.3 present. [ 0.000000] DMI: Packard Bell NEC IMEDIA H5192/GA-8I915PMD, BIOS 10g 11/25/2005 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x3fff0 max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CEFFF write-protect [ 0.000000] CF000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FC0000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] found SMP MP-table at [mem 0x000f5610-0x000f561f] mapped at [c00f5610] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] initial memory mapped: [mem 0x00000000-0x021fffff] [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x37400000-0x375fffff] [ 0.000000] [mem 0x37400000-0x375fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x34000000-0x373fffff] [ 0.000000] [mem 0x34000000-0x373fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x33ffffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x33ffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x37600000-0x377fdfff] [ 0.000000] [mem 0x37600000-0x377fdfff] page 4k [ 0.000000] BRK [0x01bce000, 0x01bcefff] PGTABLE [ 0.000000] BRK [0x01bcf000, 0x01bcffff] PGTABLE [ 0.000000] RAMDISK: [mem 0x35b98000-0x36dc3fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x000F7360 000014 (v00 GBT ) [ 0.000000] ACPI: RSDT 0x3FFF3040 000034 (v01 GBT AWRDACPI 42302E31 AWRD 01010101) [ 0.000000] ACPI: FACP 0x3FFF30C0 000074 (v01 GBT AWRDACPI 42302E31 AWRD 01010101) [ 0.000000] ACPI: DSDT 0x3FFF3180 003654 (v01 GBT AWRDACPI 00001000 MSFT 0100000C) [ 0.000000] ACPI: FACS 0x3FFF0000 000040 [ 0.000000] ACPI: BOOT 0x3FFF6840 000028 (v01 GBT AWRDACPI 42302E31 AWRD 01010101) [ 0.000000] ACPI: MCFG 0x3FFF6980 00003C (v01 GBT AWRDACPI 42302E31 AWRD 01010101) [ 0.000000] ACPI: APIC 0x3FFF68C0 000068 (v01 GBT AWRDACPI 42302E31 AWRD 01010101) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 135MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] BRK [0x01bd0000, 0x01bd0fff] PGTABLE [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] Normal [mem 0x01000000-0x377fdfff] [ 0.000000] HighMem [mem 0x377fe000-0x3ffeffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0x3ffeffff] [ 0.000000] On node 0 totalpages: 262030 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 223230 pages, LIFO batch:31 [ 0.000000] HighMem zone: 272 pages used for memmap [ 0.000000] HighMem zone: 34802 pages, LIFO batch:7 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] smpboot: Allowing 2 CPUs, 1 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.000000] e820: [mem 0x40000000-0xcfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @f6fbb000 s35008 r0 d22336 u57344 [ 0.000000] pcpu-alloc: s35008 r0 d22336 u57344 alloc=14*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260254 [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.16.0-38-generic root=UUID=25d2f18d-39c6-498e-9a6b-49821079341d ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (000377fe:0003fff0) [ 0.000000] Initializing Movable for node 0 (00000000:00000000) [ 0.000000] Memory: 1008084K/1048120K available (6747K kernel code, 646K rwdata, 2896K rodata, 892K init, 788K bss, 40036K reserved, 139208K highmem) [ 0.000000] virtual kernel memory layout: fixmap : 0xfff15000 - 0xfffff000 ( 936 kB) pkmap : 0xff800000 - 0xffa00000 (2048 kB) vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) .init : 0xc1a10000 - 0xc1aef000 ( 892 kB) .data : 0xc1697108 - 0xc1a0e800 (3549 kB) .text : 0xc1000000 - 0xc1697108 (6748 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS:2304 nr_irqs:512 16 [ 0.000000] CPU 0 irqstacks, hard=f5408000 soft=f540a000 [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 2097152 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3058.858 MHz processor [ 0.008019] Calibrating delay loop (skipped), value calculated using timer frequency.. 6117.71 BogoMIPS (lpj=12235432) [ 0.008026] pid_max: default: 32768 minimum: 301 [ 0.008043] ACPI: Core revision 20140424 [ 0.014111] ACPI: All ACPI Tables successfully acquired [ 0.014876] Security Framework initialized [ 0.014906] AppArmor: AppArmor initialized [ 0.014909] Yama: becoming mindful. [ 0.014983] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.014987] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.015362] Initializing cgroup subsys memory [ 0.015407] Initializing cgroup subsys devices [ 0.015421] Initializing cgroup subsys freezer [ 0.015428] Initializing cgroup subsys net_cls [ 0.015437] Initializing cgroup subsys blkio [ 0.015447] Initializing cgroup subsys perf_event [ 0.015453] Initializing cgroup subsys net_prio [ 0.015467] Initializing cgroup subsys hugetlb [ 0.015503] CPU0: Hyper-Threading is disabled [ 0.015514] mce: CPU supports 4 MCE banks [ 0.015528] CPU0: Thermal monitoring enabled (TM1) [ 0.015544] Last level iTLB entries: 4KB 128, 2MB 128, 4MB 128 Last level dTLB entries: 4KB 64, 2MB 0, 4MB 64, 1GB 0 tlb_flushall_shift: 6 [ 0.034133] ftrace: allocating 28580 entries in 56 pages [ 0.048135] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.048524] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.090869] smpboot: CPU0: Intel(R) Pentium(R) 4 CPU 3.06GHz (fam: 0f, model: 04, stepping: 09) [ 0.092000] Performance Events: Netburst events, Netburst P4/Xeon PMU driver. [ 0.092000] ... version: 0 [ 0.092000] ... bit width: 40 [ 0.092000] ... generic registers: 18 [ 0.092000] ... value mask: 000000ffffffffff [ 0.092000] ... max period: 0000007fffffffff [ 0.092000] ... fixed-purpose events: 0 [ 0.092000] ... event mask: 000000000003ffff [ 0.092000] x86: Booted up 1 node, 1 CPUs [ 0.092000] smpboot: Total of 1 processors activated (6117.71 BogoMIPS) [ 0.092000] devtmpfs: initialized [ 0.092029] evm: security.selinux [ 0.092033] evm: security.SMACK64 [ 0.092034] evm: security.SMACK64EXEC [ 0.092036] evm: security.SMACK64TRANSMUTE [ 0.092037] evm: security.SMACK64MMAP [ 0.092039] evm: security.ima [ 0.092041] evm: security.capability [ 0.092096] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.092205] PM: Registering ACPI NVS region [mem 0x3fff0000-0x3fff2fff] (12288 bytes) [ 0.093762] pinctrl core: initialized pinctrl subsystem [ 0.093901] regulator-dummy: no parameters [ 0.093946] RTC time: 0:00:18, date: 01/01/05 [ 0.094028] NET: Registered protocol family 16 [ 0.094333] EISA bus registered [ 0.094340] cpuidle: using governor ladder [ 0.094344] cpuidle: using governor menu [ 0.094469] ACPI: bus type PCI registered [ 0.094475] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.094593] PCI: MMCONFIG for domain 0000 [bus 00-00] at [mem 0xd0000000-0xd00fffff] (base 0xd0000000) [ 0.094598] PCI: MMCONFIG at [mem 0xd0000000-0xd00fffff] reserved in E820 [ 0.094600] PCI: Using MMCONFIG for extended config space [ 0.094602] PCI: Using configuration type 1 for base access [ 0.097426] ACPI: Added _OSI(Module Device) [ 0.097430] ACPI: Added _OSI(Processor Device) [ 0.097433] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.097435] ACPI: Added _OSI(Processor Aggregator Device) [ 0.101567] ACPI: Interpreter enabled [ 0.101590] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580) [ 0.101597] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580) [ 0.101617] ACPI: (supports S0 S3 S4 S5) [ 0.101621] ACPI: Using IOAPIC for interrupt routing [ 0.101672] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.108076] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.108087] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.108095] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.108212] acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.108216] acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.108220] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.108223] acpi PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored) [ 0.108226] acpi PNP0A03:00: host bridge window [mem 0x40000000-0xfebfffff] (ignored) [ 0.108229] PCI: root bus 00: using default resources [ 0.108234] acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-00] only partially covers this bridge [ 0.108446] PCI host bridge to bus 0000:00 [ 0.108452] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.108455] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 0.108458] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff] [ 0.108473] pci 0000:00:00.0: [8086:2580] type 00 class 0x060000 [ 0.108631] pci 0000:00:01.0: [8086:2581] type 01 class 0x060400 [ 0.108698] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.108848] pci 0000:00:1b.0: [8086:2668] type 00 class 0x040300 [ 0.108872] pci 0000:00:1b.0: reg 0x10: [mem 0xf0200000-0xf0203fff 64bit] [ 0.108962] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.109022] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.109103] pci 0000:00:1c.0: [8086:2660] type 01 class 0x060400 [ 0.109198] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.109258] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.109343] pci 0000:00:1d.0: [8086:2658] type 00 class 0x0c0300 [ 0.109392] pci 0000:00:1d.0: reg 0x20: [io 0xbc00-0xbc1f] [ 0.109487] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.109565] pci 0000:00:1d.1: [8086:2659] type 00 class 0x0c0300 [ 0.109614] pci 0000:00:1d.1: reg 0x20: [io 0xb000-0xb01f] [ 0.109706] pci 0000:00:1d.1: System wakeup disabled by ACPI [ 0.109782] pci 0000:00:1d.2: [8086:265a] type 00 class 0x0c0300 [ 0.109831] pci 0000:00:1d.2: reg 0x20: [io 0xb400-0xb41f] [ 0.109922] pci 0000:00:1d.2: System wakeup disabled by ACPI [ 0.110001] pci 0000:00:1d.3: [8086:265b] type 00 class 0x0c0300 [ 0.110050] pci 0000:00:1d.3: reg 0x20: [io 0xb800-0xb81f] [ 0.110141] pci 0000:00:1d.3: System wakeup disabled by ACPI [ 0.110227] pci 0000:00:1d.7: [8086:265c] type 00 class 0x0c0320 [ 0.110249] pci 0000:00:1d.7: reg 0x10: [mem 0xf0204000-0xf02043ff] [ 0.110337] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.110409] pci 0000:00:1d.7: System wakeup disabled by ACPI [ 0.110494] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 0.110602] pci 0000:00:1e.0: System wakeup disabled by ACPI [ 0.110680] pci 0000:00:1f.0: [8086:2640] type 00 class 0x060100 [ 0.110774] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 [ 0.110784] pci 0000:00:1f.0: can't claim BAR 13 [io 0x0400-0x047f]: address conflict with ACPI CPU throttle [io 0x0410-0x0415] [ 0.110791] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO [ 0.110796] pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 0800-087f [ 0.110801] pci 0000:00:1f.0: LPC Generic IO decode 2 PIO at 0290-029f [ 0.110915] pci 0000:00:1f.2: [8086:2651] type 00 class 0x010180 [ 0.110934] pci 0000:00:1f.2: reg 0x10: [io 0x0000-0x0007] [ 0.110945] pci 0000:00:1f.2: reg 0x14: [io 0x0000-0x0003] [ 0.110955] pci 0000:00:1f.2: reg 0x18: [io 0x0000-0x0007] [ 0.110965] pci 0000:00:1f.2: reg 0x1c: [io 0x0000-0x0003] [ 0.110976] pci 0000:00:1f.2: reg 0x20: [io 0xf000-0xf00f] [ 0.110996] pci 0000:00:1f.2: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 0.110999] pci 0000:00:1f.2: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 0.111002] pci 0000:00:1f.2: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 0.111005] pci 0000:00:1f.2: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 0.111031] pci 0000:00:1f.2: PME# supported from D3hot [ 0.111157] pci 0000:00:1f.3: [8086:266a] type 00 class 0x0c0500 [ 0.111217] pci 0000:00:1f.3: reg 0x20: [io 0x0500-0x051f] [ 0.111422] pci 0000:01:00.0: [1002:7146] type 00 class 0x030000 [ 0.111441] pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xe7ffffff 64bit pref] [ 0.111455] pci 0000:01:00.0: reg 0x18: [mem 0xe9000000-0xe900ffff 64bit] [ 0.111466] pci 0000:01:00.0: reg 0x20: [io 0x9000-0x90ff] [ 0.111483] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref] [ 0.111523] pci 0000:01:00.0: supports D1 D2 [ 0.111606] pci 0000:01:00.1: [1002:7166] type 00 class 0x038000 [ 0.111623] pci 0000:01:00.1: reg 0x10: [mem 0xe9010000-0xe901ffff 64bit] [ 0.111690] pci 0000:01:00.1: supports D1 D2 [ 0.111762] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.111774] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.111779] pci 0000:00:01.0: bridge window [io 0x9000-0x9fff] [ 0.111784] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff] [ 0.111893] pci 0000:02:00.0: [18c3:0720] type 00 class 0x040000 [ 0.111916] pci 0000:02:00.0: reg 0x10: [mem 0xf0000000-0xf000ffff] [ 0.111942] pci 0000:02:00.0: reg 0x14: [mem 0xf0010000-0xf001ffff 64bit] [ 0.112148] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.112161] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.112169] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf00fffff] [ 0.112253] pci 0000:03:05.0: [10ec:8139] type 00 class 0x020000 [ 0.112276] pci 0000:03:05.0: reg 0x10: [io 0xa000-0xa0ff] [ 0.112289] pci 0000:03:05.0: reg 0x14: [mem 0xf0105000-0xf01050ff] [ 0.112370] pci 0000:03:05.0: supports D1 D2 [ 0.112373] pci 0000:03:05.0: PME# supported from D1 D2 D3hot D3cold [ 0.112468] pci 0000:03:07.0: [104c:8024] type 00 class 0x0c0010 [ 0.112492] pci 0000:03:07.0: reg 0x10: [mem 0xf0104000-0xf01047ff] [ 0.112504] pci 0000:03:07.0: reg 0x14: [mem 0xf0100000-0xf0103fff] [ 0.112588] pci 0000:03:07.0: supports D1 D2 [ 0.112591] pci 0000:03:07.0: PME# supported from D0 D1 D2 D3hot [ 0.112704] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode) [ 0.112710] pci 0000:00:1e.0: bridge window [io 0xa000-0xafff] [ 0.112716] pci 0000:00:1e.0: bridge window [mem 0xf0100000-0xf01fffff] [ 0.112724] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode) [ 0.112727] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode) [ 0.112751] pci_bus 0000:00: on NUMA node 0 [ 0.113635] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 0.113737] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.113839] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.113939] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.114039] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.114139] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.114238] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.114339] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.114708] vgaarb: setting as boot device: PCI:0000:01:00.0 [ 0.114712] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.114715] vgaarb: loaded [ 0.114717] vgaarb: bridge control possible 0000:01:00.0 [ 0.115177] SCSI subsystem initialized [ 0.115247] libata version 3.00 loaded. [ 0.115306] ACPI: bus type USB registered [ 0.115349] usbcore: registered new interface driver usbfs [ 0.115369] usbcore: registered new interface driver hub [ 0.115409] usbcore: registered new device driver usb [ 0.115643] PCI: Using ACPI for IRQ routing [ 0.115648] PCI: pci_cache_line_size set to 64 bytes [ 0.115711] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff] [ 0.115715] e820: reserve RAM buffer [mem 0x3fff0000-0x3fffffff] [ 0.115923] NetLabel: Initializing [ 0.115926] NetLabel: domain hash size = 128 [ 0.115928] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.115946] NetLabel: unlabeled traffic allowed by default [ 0.116211] hpet clockevent registered [ 0.116216] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.116222] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.116229] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.118317] Switched to clocksource hpet [ 0.126519] AppArmor: AppArmor Filesystem Enabled [ 0.126581] pnp: PnP ACPI init [ 0.126616] ACPI: bus type PNP registered [ 0.126814] system 00:00: [io 0x04d0-0x04d1] has been reserved [ 0.126819] system 00:00: [io 0x0290-0x029f] has been reserved [ 0.126822] system 00:00: [io 0x0800-0x087f] has been reserved [ 0.126826] system 00:00: [io 0x0880-0x088f] has been reserved [ 0.126832] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.126905] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.127114] pnp 00:02: [dma 2] [ 0.127179] pnp 00:02: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.127506] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.127842] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.128397] pnp 00:05: [dma 3] [ 0.128481] pnp 00:05: Plug and Play ACPI device, IDs PNP0401 (active) [ 0.128589] pnp 00:06: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.128666] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.128776] system 00:08: [io 0x0400-0x04bf] could not be reserved [ 0.128782] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.129148] system 00:09: [mem 0xd0000000-0xdfffffff] has been reserved [ 0.129154] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.129503] system 00:0a: [mem 0x000d0000-0x000d7fff] has been reserved [ 0.129508] system 00:0a: [mem 0x000d9000-0x000dbfff] has been reserved [ 0.129512] system 00:0a: [mem 0x000f0000-0x000fbfff] could not be reserved [ 0.129516] system 00:0a: [mem 0x000fc000-0x000fffff] could not be reserved [ 0.129519] system 00:0a: [mem 0x3fff0000-0x3fffffff] could not be reserved [ 0.129523] system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.129527] system 00:0a: [mem 0x00100000-0x3ffeffff] could not be reserved [ 0.129531] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.129535] system 00:0a: [mem 0xfed13000-0xfed1dfff] has been reserved [ 0.129538] system 00:0a: [mem 0xfed20000-0xfed8ffff] has been reserved [ 0.129542] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.129545] system 00:0a: [mem 0xffb00000-0xffb7ffff] has been reserved [ 0.129549] system 00:0a: [mem 0xfff00000-0xffffffff] has been reserved [ 0.129553] system 00:0a: [mem 0x000e0000-0x000effff] has been reserved [ 0.129557] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.129569] pnp: PnP ACPI: found 11 devices [ 0.129571] ACPI: bus type PNP unregistered [ 0.129581] PnPBIOS: Disabled by ACPI PNP [ 0.167494] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000 [ 0.167500] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 [ 0.167517] pci 0000:00:1f.0: BAR 13: [io 0x0400-0x047f] has bogus alignment [ 0.167524] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.167527] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.167538] pci 0000:00:01.0: BAR 15: assigned [mem 0x40000000-0x400fffff pref] [ 0.167544] pci 0000:00:1c.0: BAR 15: assigned [mem 0x100000000-0x1001fffff 64bit pref] [ 0.167550] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff] [ 0.167557] pci 0000:01:00.0: BAR 6: assigned [mem 0x40000000-0x4001ffff pref] [ 0.167561] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.167565] pci 0000:00:01.0: bridge window [io 0x9000-0x9fff] [ 0.167571] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff] [ 0.167575] pci 0000:00:01.0: bridge window [mem 0x40000000-0x400fffff pref] [ 0.167581] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.167586] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 0.167592] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf00fffff] [ 0.167597] pci 0000:00:1c.0: bridge window [mem 0x100000000-0x1001fffff 64bit pref] [ 0.167605] pci 0000:00:1e.0: PCI bridge to [bus 03] [ 0.167609] pci 0000:00:1e.0: bridge window [io 0xa000-0xafff] [ 0.167615] pci 0000:00:1e.0: bridge window [mem 0xf0100000-0xf01fffff] [ 0.167626] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 0.167629] pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff] [ 0.167632] pci_bus 0000:01: resource 0 [io 0x9000-0x9fff] [ 0.167637] pci_bus 0000:01: resource 1 [mem 0xe0000000-0xefffffff] [ 0.167641] pci_bus 0000:01: resource 2 [mem 0x40000000-0x400fffff pref] [ 0.167644] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff] [ 0.167647] pci_bus 0000:02: resource 1 [mem 0xf0000000-0xf00fffff] [ 0.167650] pci_bus 0000:02: resource 2 [mem 0x100000000-0x1001fffff 64bit pref] [ 0.167653] pci_bus 0000:03: resource 0 [io 0xa000-0xafff] [ 0.167656] pci_bus 0000:03: resource 1 [mem 0xf0100000-0xf01fffff] [ 0.167659] pci_bus 0000:03: resource 4 [io 0x0000-0xffff] [ 0.167662] pci_bus 0000:03: resource 5 [mem 0x00000000-0xfffffffff] [ 0.167706] NET: Registered protocol family 2 [ 0.168035] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.168056] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.168089] TCP: Hash tables configured (established 8192 bind 8192) [ 0.168131] TCP: reno registered [ 0.168136] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.168147] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.168215] NET: Registered protocol family 1 [ 0.169051] pci 0000:01:00.0: Video device with shadowed ROM [ 0.169066] PCI: CLS 32 bytes, default 64 [ 0.169151] Trying to unpack rootfs image as initramfs... [ 0.673255] Freeing initrd memory: 18608K (f5b98000 - f6dc4000) [ 0.673398] Simple Boot Flag value 0xe read from CMOS RAM was invalid [ 0.673401] Simple Boot Flag at 0x36 set to 0x1 [ 0.673580] microcode: CPU0 sig=0xf49, pf=0x10, revision=0x3 [ 0.673671] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 0.673718] Scanning for low memory corruption every 60 seconds [ 0.674217] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.674250] Initialise system trusted keyring [ 0.674285] audit: initializing netlink subsys (disabled) [ 0.674314] audit: type=2000 audit(1104537617.672:1): initialized [ 0.674727] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.677942] zpool: loaded [ 0.677947] zbud: loaded [ 0.678063] VFS: Disk quotas dquot_6.5.2 [ 0.678142] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.679004] fuse init (API version 7.23) [ 0.679174] msgmni has been set to 1733 [ 0.679284] Key type big_key registered [ 0.679700] Key type asymmetric registered [ 0.679706] Asymmetric key parser 'x509' registered [ 0.679733] bounce: pool size: 64 pages [ 0.679751] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.679814] io scheduler noop registered [ 0.679820] io scheduler deadline registered (default) [ 0.679923] io scheduler cfq registered [ 0.680252] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X [ 0.680426] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X [ 0.680567] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.680600] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.680694] vesafb: mode is 1152x864x32, linelength=4608, pages=0 [ 0.680696] vesafb: scrolling: redraw [ 0.680699] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 [ 0.681130] vesafb: framebuffer at 0xe0000000, mapped to 0xf8080000, using 3904k, total 3904k [ 0.681316] Console: switching to colour frame buffer device 144x54 [ 0.681344] fb0: VESA VGA frame buffer device [ 0.681516] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.681523] ACPI: Power Button [PWRB] [ 0.681614] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.681619] ACPI: Power Button [PWRF] [ 0.681846] GHES: HEST is not enabled! [ 0.682009] isapnp: Scanning for PnP cards... [ 0.687544] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.707972] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.815413] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.861489] Linux agpgart interface v0.103 [ 0.864193] brd: module loaded [ 0.865445] loop: module loaded [ 0.865713] ata_piix 0000:00:1f.2: version 2.13 [ 0.865835] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] [ 0.867185] scsi0 : ata_piix [ 0.867331] scsi1 : ata_piix [ 0.867417] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 0.867421] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 0.867585] libphy: Fixed MDIO Bus: probed [ 0.867591] tun: Universal TUN/TAP device driver, 1.6 [ 0.867593] tun: (C) 1999-2004 Max Krasnyansky [ 0.867694] PPP generic driver version 2.4.2 [ 0.867770] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.867779] ehci-pci: EHCI PCI platform driver [ 0.867915] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 0.867927] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.871855] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported [ 0.871880] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf0204000 [ 0.915618] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.915729] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.915733] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.915737] usb usb1: Product: EHCI Host Controller [ 0.915740] usb usb1: Manufacturer: Linux 3.16.0-38-generic ehci_hcd [ 0.915743] usb usb1: SerialNumber: 0000:00:1d.7 [ 0.915944] hub 1-0:1.0: USB hub found [ 0.915958] hub 1-0:1.0: 8 ports detected [ 0.916333] ehci-platform: EHCI generic platform driver [ 0.916357] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.916365] ohci-pci: OHCI PCI platform driver [ 0.916388] ohci-platform: OHCI generic platform driver [ 0.916404] uhci_hcd: USB Universal Host Controller Interface driver [ 0.916528] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.916538] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.916547] uhci_hcd 0000:00:1d.0: detected 2 ports [ 0.916570] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000bc00 [ 0.916654] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.916658] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.916661] usb usb2: Product: UHCI Host Controller [ 0.916664] usb usb2: Manufacturer: Linux 3.16.0-38-generic uhci_hcd [ 0.916666] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.916855] hub 2-0:1.0: USB hub found [ 0.916867] hub 2-0:1.0: 2 ports detected [ 0.917114] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.917123] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.917131] uhci_hcd 0000:00:1d.1: detected 2 ports [ 0.917167] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b000 [ 0.917238] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.917242] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.917245] usb usb3: Product: UHCI Host Controller [ 0.917247] usb usb3: Manufacturer: Linux 3.16.0-38-generic uhci_hcd [ 0.917250] usb usb3: SerialNumber: 0000:00:1d.1 [ 0.917435] hub 3-0:1.0: USB hub found [ 0.917446] hub 3-0:1.0: 2 ports detected [ 0.917692] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.917702] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.917710] uhci_hcd 0000:00:1d.2: detected 2 ports [ 0.917743] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b400 [ 0.917819] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.917823] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.917825] usb usb4: Product: UHCI Host Controller [ 0.917828] usb usb4: Manufacturer: Linux 3.16.0-38-generic uhci_hcd [ 0.917831] usb usb4: SerialNumber: 0000:00:1d.2 [ 0.918014] hub 4-0:1.0: USB hub found [ 0.918026] hub 4-0:1.0: 2 ports detected [ 0.918267] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 0.918277] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 0.918285] uhci_hcd 0000:00:1d.3: detected 2 ports [ 0.918318] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000b800 [ 0.918392] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.918396] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.918399] usb usb5: Product: UHCI Host Controller [ 0.918402] usb usb5: Manufacturer: Linux 3.16.0-38-generic uhci_hcd [ 0.918404] usb usb5: SerialNumber: 0000:00:1d.3 [ 0.918584] hub 5-0:1.0: USB hub found [ 0.918595] hub 5-0:1.0: 2 ports detected [ 0.918889] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.965208] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.965217] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.965430] mousedev: PS/2 mouse device common for all mice [ 0.965661] rtc_cmos 00:01: RTC can wake from S4 [ 0.965818] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 0.965851] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs [ 0.965947] device-mapper: uevent: version 1.0.3 [ 0.966073] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com [ 0.966118] platform eisa.0: Probing EISA bus 0 [ 0.966128] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 0.966155] platform eisa.0: EISA: Detected 0 cards [ 0.966180] cpufreq-nforce2: No nForce2 chipset. [ 0.966194] ledtrig-cpu: registered to indicate activity on CPUs [ 0.966369] TCP: cubic registered [ 0.966605] NET: Registered protocol family 10 [ 0.966935] NET: Registered protocol family 17 [ 0.966957] Key type dns_resolver registered [ 0.967216] Using IPI No-Shortcut mode [ 0.967380] Loading compiled-in X.509 certificates [ 0.971858] Loaded X.509 cert 'Magrathea: Glacier signing key: 4fe12264ad04b41c64ed4480a8934267c4c1f1b8' [ 0.971883] registered taskstats version 1 [ 0.975195] Key type trusted registered [ 0.981057] Key type encrypted registered [ 0.981071] AppArmor: AppArmor sha1 policy hashing enabled [ 0.981077] ima: No TPM chip found, activating TPM-bypass! [ 0.981115] evm: HMAC attrs: 0x1 [ 0.981510] Magic number: 5:0:0 [ 0.981617] rtc_cmos 00:01: setting system clock to 2005-01-01 00:00:19 UTC (1104537619) [ 1.025574] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.025577] EDD information not available. [ 1.025668] PM: Hibernation image not present or could not be loaded. [ 1.069367] isapnp: No Plug & Play device found [ 1.069844] ata1.00: ATA-7: ST3250823AS, 3.03, max UDMA/133 [ 1.069848] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.072894] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 1.076895] ata1.00: configured for UDMA/133 [ 1.077030] scsi 0:0:0:0: Direct-Access ATA ST3250823AS 3.03 PQ: 0 ANSI: 5 [ 1.077849] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 1.077930] sd 0:0:0:0: [sda] Write Protect is off [ 1.077934] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.077969] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.078371] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.084319] ata2.00: ATAPI: LITE-ON DVD SOHD-16P9S, F9C3, max UDMA/33 [ 1.084326] ata2.01: ATAPI: PHILIPS DVDR1628P1, Q1.1, max UDMA/33 [ 1.092195] ata2.00: configured for UDMA/33 [ 1.100427] sda: sda1 sda2 sda3 sda4 [ 1.100962] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.108470] ata2.01: configured for UDMA/33 [ 1.109889] scsi 1:0:0:0: CD-ROM LITE-ON DVD SOHD-16P9S F9C3 PQ: 0 ANSI: 5 [ 1.124681] sr0: scsi3-mmc drive: 4x/48x cd/rw xa/form2 cdda tray [ 1.124685] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.124868] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.125023] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.127319] scsi 1:0:1:0: CD-ROM PHILIPS DVDR1628P1 Q1.1 PQ: 0 ANSI: 5 [ 1.143002] sr1: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray [ 1.143179] sr 1:0:1:0: Attached scsi CD-ROM sr1 [ 1.143360] sr 1:0:1:0: Attached scsi generic sg2 type 5 [ 1.144070] Freeing unused kernel memory: 892K (c1a10000 - c1aef000) [ 1.144125] Write protecting the kernel text: 6752k [ 1.144205] Write protecting the kernel read-only data: 2900k [ 1.144208] NX-protecting the kernel data: 5536k [ 1.164318] systemd-udevd[99]: starting version 204 [ 1.301831] Floppy drive(s): fd0 is 1.44M [ 1.307749] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 1.307786] 8139cp 0000:03:05.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too [ 1.322708] FDC 0 is a post-1991 82077 [ 1.328804] 8139too: 8139too Fast Ethernet driver 0.9.28 [ 1.331649] 8139too 0000:03:05.0 eth0: RealTek RTL8139 at 0x0001a000, 00:14:85:6c:c1:b5, IRQ 21 [ 1.392235] firewire_ohci 0000:03:07.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2 [ 1.672038] tsc: Refined TSC clocksource calibration: 3058.999 MHz [ 1.729260] psmouse serio1: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64 [ 1.884256] usb 2-2: new full-speed USB device number 2 using uhci_hcd [ 1.892178] firewire_core 0000:03:07.0: created device fw0: GUID 00148500006d3f22, S400 [ 2.057629] usb 2-2: New USB device found, idVendor=058f, idProduct=9360 [ 2.057636] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.057639] usb 2-2: Product: USB Reader [ 2.057642] usb 2-2: Manufacturer: [ 2.057645] usb 2-2: SerialNumber: 2004888 [ 2.073486] usb-storage 2-2:1.0: USB Mass Storage device detected [ 2.073616] scsi2 : usb-storage 2-2:1.0 [ 2.074040] usbcore: registered new interface driver usb-storage [ 2.081183] usbcore: registered new interface driver uas [ 2.300040] usb 5-1: new full-speed USB device number 2 using uhci_hcd [ 2.469377] usb 5-1: New USB device found, idVendor=04f9, idProduct=01cf [ 2.469383] usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=3 [ 2.469386] usb 5-1: SerialNumber: BROF8F656188 [ 2.472731] usb-storage 5-1:1.2: USB Mass Storage device detected [ 2.473027] scsi3 : usb-storage 5-1:1.2 [ 2.500218] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4 [ 2.661707] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null) [ 2.673541] Switched to clocksource tsc [ 2.711279] random: nonblocking pool is initialized [ 3.076650] scsi 2:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0 [ 3.079644] scsi 2:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0 [ 3.082642] scsi 2:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0 [ 3.085642] scsi 2:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0 [ 3.086020] sd 2:0:0:0: Attached scsi generic sg3 type 0 [ 3.086312] sd 2:0:0:1: Attached scsi generic sg4 type 0 [ 3.086588] sd 2:0:0:2: Attached scsi generic sg5 type 0 [ 3.086919] sd 2:0:0:3: Attached scsi generic sg6 type 0 [ 3.129633] sd 2:0:0:0: [sdb] Attached SCSI removable disk [ 3.134632] sd 2:0:0:1: [sdc] Attached SCSI removable disk [ 3.139631] sd 2:0:0:2: [sdd] Attached SCSI removable disk [ 3.144633] sd 2:0:0:3: [sde] Attached SCSI removable disk [ 3.489403] scsi 3:0:0:0: Direct-Access Brother DCP-150C 1.00 PQ: 0 ANSI: 2 [ 3.489792] sd 3:0:0:0: Attached scsi generic sg7 type 0 [ 3.559391] sd 3:0:0:0: [sdf] Attached SCSI removable disk [ 35.295025] Adding 1952764k swap on /dev/sda2. Priority:-1 extents:1 across:1952764k FS [ 36.785331] systemd-udevd[281]: starting version 204 [ 36.982418] lp: driver loaded but no devices found [ 37.010817] ppdev: user-space parallel port driver [ 37.026119] parport_pc 00:05: reported by Plug and Play ACPI [ 37.026208] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 37.081593] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 37.126943] lp0: using parport0 (interrupt-driven). [ 37.369350] intel_rng: FWH not detected [ 37.475823] [drm] Initialized drm 1.1.0 20060810 [ 37.502799] cxd2099: module is from the staging directory, the quality is unknown, you have been warned. [ 37.561573] nGene PCIE bridge driver, Copyright (C) 2005-2007 Micronas [ 37.561712] ngene: Found Terratec Integra/Cinergy2400i Dual DVB-T [ 37.562795] ngene: Device version 1 [ 37.805516] audit: type=1400 audit(1104534056.322:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=329 comm="apparmor_parser" [ 37.805529] audit: type=1400 audit(1104534056.322:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=329 comm="apparmor_parser" [ 37.805537] audit: type=1400 audit(1104534056.322:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=329 comm="apparmor_parser" [ 37.806272] audit: type=1400 audit(1104534056.322:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=329 comm="apparmor_parser" [ 37.806283] audit: type=1400 audit(1104534056.322:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=329 comm="apparmor_parser" [ 37.806633] audit: type=1400 audit(1104534056.322:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=329 comm="apparmor_parser" [ 37.941833] [drm] radeon kernel modesetting enabled. [ 37.941921] checking generic (e0000000 3d0000) vs hw (e0000000 8000000) [ 37.941924] fb: switching to radeondrmfb from VESA VGA [ 37.941965] Console: switching to colour dummy device 80x25 [ 37.975522] ngene 0000:02:00.0: Direct firmware load failed with error -2 [ 37.975529] ngene 0000:02:00.0: Falling back to user helper [ 37.985717] [drm] initializing kernel modesetting (RV515 0x1002:0x7146 0x174B:0x0870). [ 37.985742] [drm] register mmio base: 0xE9000000 [ 37.985745] [drm] register mmio size: 65536 [ 37.985869] ATOM BIOS: RPCP [ 37.985900] [drm] Generation 2 PCI interface, using max accessible memory [ 37.985909] radeon 0000:01:00.0: VRAM: 256M 0x0000000000000000 - 0x000000000FFFFFFF (256M used) [ 37.985913] radeon 0000:01:00.0: GTT: 512M 0x0000000010000000 - 0x000000002FFFFFFF [ 37.985946] [drm] Detected VRAM RAM=256M, BAR=128M [ 37.985949] [drm] RAM width 128bits DDR [ 37.996118] [TTM] Zone kernel: Available graphics memory: 444188 kiB [ 37.996123] [TTM] Zone highmem: Available graphics memory: 513792 kiB [ 37.996126] [TTM] Initializing pool allocator [ 37.996136] [TTM] Initializing DMA pool allocator [ 37.996171] [drm] radeon: 256M of VRAM memory ready [ 37.996174] [drm] radeon: 512M of GTT memory ready. [ 37.996198] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 38.006719] [drm] radeon: 1 quad pipes, 1 z pipes initialized. [ 38.027838] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000). [ 38.046267] radeon 0000:01:00.0: WB enabled [ 38.046278] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000010000000 and cpu addr 0xf58bc000 [ 38.046282] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 38.046284] [drm] Driver supports precise vblank timestamp query. [ 38.046287] radeon 0000:01:00.0: radeon: MSI limited to 32-bit [ 38.046305] [drm] radeon: irq initialized. [ 38.046323] [drm] Loading R500 Microcode [ 38.332738] [drm] radeon: ring at 0x0000000010001000 [ 38.332778] [drm] ring test succeeded in 9 usecs [ 38.332955] [drm] ib test succeeded in 0 usecs [ 38.350671] [drm] Radeon Display Connectors [ 38.350677] [drm] Connector 0: [ 38.350680] [drm] VGA-1 [ 38.350683] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c [ 38.350685] [drm] Encoders: [ 38.350687] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 38.350689] [drm] Connector 1: [ 38.350691] [drm] SVIDEO-1 [ 38.350692] [drm] Encoders: [ 38.350694] [drm] TV1: INTERNAL_KLDSCP_DAC2 [ 38.350696] [drm] Connector 2: [ 38.350698] [drm] DVI-I-1 [ 38.350699] [drm] HPD2 [ 38.350702] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c [ 38.350704] [drm] Encoders: [ 38.350706] [drm] CRT2: INTERNAL_KLDSCP_DAC2 [ 38.350707] [drm] DFP3: INTERNAL_LVTM1 [ 38.493926] [drm] fb mappable at 0xE00C0000 [ 38.493932] [drm] vram apper at 0xE0000000 [ 38.493934] [drm] size 5300224 [ 38.493936] [drm] fb depth is 24 [ 38.493938] [drm] pitch is 5888 [ 38.494135] fbcon: radeondrmfb (fb0) is primary device [ 38.494176] Console: switching to colour frame buffer device 180x56 [ 38.494215] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device [ 38.494218] radeon 0000:01:00.0: registered panic notifier [ 38.494228] [drm] Initialized radeon 2.39.0 20080528 for 0000:01:00.0 on minor 0 [ 38.514125] snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X [ 38.578211] sound hdaudioC0D2: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 38.578218] sound hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 38.578222] sound hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 38.578225] sound hdaudioC0D2: mono: mono_out=0x0 [ 38.578228] sound hdaudioC0D2: dig-out=0x1e/0x0 [ 38.578230] sound hdaudioC0D2: inputs: [ 38.578234] sound hdaudioC0D2: Front Mic=0x19 [ 38.578238] sound hdaudioC0D2: Rear Mic=0x18 [ 38.578241] sound hdaudioC0D2: Line=0x1a [ 38.644053] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5 [ 38.644791] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 [ 38.645318] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 38.646497] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 38.647157] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 38.651936] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 38.655453] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 38.657275] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 39.005253] gpio_ich: ACPI BAR is busy, GPI 0 - 15 unavailable [ 39.007325] gpio_ich: GPIO from 206 to 255 on gpio_ich [ 39.038014] ngene: Could not load firmware file ngene_15.fw. [ 39.038021] ngene: Copy ngene_15.fw to your hotplug directory! [ 39.038149] ngene: probe of 0000:02:00.0 failed with error -1 [ 39.956989] EXT4-fs (sda4): re-mounted. Opts: errors=remount-ro [ 42.404762] usblp 5-1:1.0: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04F9 pid 0x01CF [ 42.406607] usbcore: registered new interface driver usblp [ 43.420048] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 44.084269] init: failsafe main process (596) killed by TERM signal [ 44.723042] audit: type=1400 audit(1104534063.238:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=705 comm="apparmor_parser" [ 44.723056] audit: type=1400 audit(1104534063.238:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=705 comm="apparmor_parser" [ 44.723772] audit: type=1400 audit(1104534063.238:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=705 comm="apparmor_parser" [ 44.881760] Bluetooth: Core ver 2.19 [ 44.881799] NET: Registered protocol family 31 [ 44.881802] Bluetooth: HCI device and connection manager initialized [ 44.882334] Bluetooth: HCI socket layer initialized [ 44.882341] Bluetooth: L2CAP socket layer initialized [ 44.882360] Bluetooth: SCO socket layer initialized [ 44.898215] Bluetooth: RFCOMM TTY layer initialized [ 44.898231] Bluetooth: RFCOMM socket layer initialized [ 44.898240] Bluetooth: RFCOMM ver 1.11 [ 45.156923] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 45.156929] Bluetooth: BNEP filters: protocol multicast [ 45.156943] Bluetooth: BNEP socket layer initialized [ 45.725048] audit: type=1400 audit(1104534064.242:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=773 comm="apparmor_parser" [ 45.725063] audit: type=1400 audit(1104534064.242:12): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=773 comm="apparmor_parser" [ 45.725513] audit: type=1400 audit(1104534064.242:13): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="chromium" pid=773 comm="apparmor_parser" [ 45.759542] audit: type=1400 audit(1104534064.274:14): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=783 comm="apparmor_parser" [ 45.759561] audit: type=1400 audit(1104534064.274:15): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=783 comm="apparmor_parser" [ 45.759572] audit: type=1400 audit(1104534064.274:16): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=783 comm="apparmor_parser" [ 45.765087] audit: type=1400 audit(1104534064.282:17): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=783 comm="apparmor_parser" [ 45.859227] init: cups main process (709) killed by HUP signal [ 45.859254] init: cups main process ended, respawning [ 47.982576] 8139too 0000:03:05.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 51.947898] init: plymouth-upstart-bridge main process ended, respawning [ 51.984748] init: plymouth-upstart-bridge main process (1197) terminated with status 1 [ 51.984775] init: plymouth-upstart-bridge main process ended, respawning [ 75.257904] audit_printk_skb: 87 callbacks suppressed [ 75.257911] audit: type=1400 audit(1473078062.070:47): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1823 comm="apparmor_parser" [ 75.257925] audit: type=1400 audit(1473078062.070:48): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1823 comm="apparmor_parser" [ 75.258640] audit: type=1400 audit(1473078062.070:49): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1823 comm="apparmor_parser" [ 388.072078] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 388.072086] ata1.00: BMDMA stat 0x25 [ 388.072090] ata1.00: failed command: READ DMA [ 388.072098] ata1.00: cmd c8/00:08:f9:c0:38/00:00:00:00:00/e7 tag 0 dma 4096 in res 51/40:00:f9:c0:38/00:00:00:00:00/e7 Emask 0x9 (media error) [ 388.072102] ata1.00: status: { DRDY ERR } [ 388.072104] ata1.00: error: { UNC } [ 388.088307] ata1.00: configured for UDMA/133 [ 388.088327] sd 0:0:0:0: [sda] Unhandled sense code [ 388.088331] sd 0:0:0:0: [sda] [ 388.088333] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 388.088336] sd 0:0:0:0: [sda] [ 388.088338] Sense Key : Medium Error [current] [descriptor] [ 388.088343] Descriptor sense data with sense descriptors (in hex): [ 388.088345] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 388.088356] 07 38 c0 f9 [ 388.088361] sd 0:0:0:0: [sda] [ 388.088365] Add. Sense: Unrecovered read error - auto reallocate failed [ 388.088368] sd 0:0:0:0: [sda] CDB: [ 388.088370] Read(10): 28 00 07 38 c0 f9 00 00 08 00 [ 388.088381] end_request: I/O error, dev sda, sector 121159929 [ 388.088387] Buffer I/O error on device sda3, logical block 6259038 [ 388.088404] ata1: EH complete [ 391.728039] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 391.728045] ata1.00: BMDMA stat 0x25 [ 391.728050] ata1.00: failed command: READ DMA [ 391.728056] ata1.00: cmd c8/00:08:f9:c0:38/00:00:00:00:00/e7 tag 0 dma 4096 in res 51/40:00:f9:c0:38/00:00:00:00:00/e7 Emask 0x9 (media error) [ 391.728060] ata1.00: status: { DRDY ERR } [ 391.728062] ata1.00: error: { UNC } [ 391.752280] ata1.00: configured for UDMA/133 [ 391.752296] sd 0:0:0:0: [sda] Unhandled sense code [ 391.752300] sd 0:0:0:0: [sda] [ 391.752302] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 391.752304] sd 0:0:0:0: [sda] [ 391.752306] Sense Key : Medium Error [current] [descriptor] [ 391.752310] Descriptor sense data with sense descriptors (in hex): [ 391.752312] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 391.752323] 07 38 c0 f9 [ 391.752328] sd 0:0:0:0: [sda] [ 391.752332] Add. Sense: Unrecovered read error - auto reallocate failed [ 391.752335] sd 0:0:0:0: [sda] CDB: [ 391.752336] Read(10): 28 00 07 38 c0 f9 00 00 08 00 [ 391.752347] end_request: I/O error, dev sda, sector 121159929 [ 391.752352] Buffer I/O error on device sda3, logical block 6259038 [ 391.752369] ata1: EH complete [ 396.984041] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 396.984048] ata1.00: BMDMA stat 0x25 [ 396.984053] ata1.00: failed command: READ DMA [ 396.984060] ata1.00: cmd c8/00:08:f9:c0:38/00:00:00:00:00/e7 tag 0 dma 4096 in res 51/40:00:f9:c0:38/00:00:00:00:00/e7 Emask 0x9 (media error) [ 396.984064] ata1.00: status: { DRDY ERR } [ 396.984067] ata1.00: error: { UNC } [ 397.000287] ata1.00: configured for UDMA/133 [ 397.000301] sd 0:0:0:0: [sda] Unhandled sense code [ 397.000305] sd 0:0:0:0: [sda] [ 397.000307] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 397.000310] sd 0:0:0:0: [sda] [ 397.000312] Sense Key : Medium Error [current] [descriptor] [ 397.000317] Descriptor sense data with sense descriptors (in hex): [ 397.000319] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 397.000330] 07 38 c0 f9 [ 397.000335] sd 0:0:0:0: [sda] [ 397.000339] Add. Sense: Unrecovered read error - auto reallocate failed [ 397.000342] sd 0:0:0:0: [sda] CDB: [ 397.000344] Read(10): 28 00 07 38 c0 f9 00 00 08 00 [ 397.000355] end_request: I/O error, dev sda, sector 121159929 [ 397.000359] Buffer I/O error on device sda3, logical block 6259038 [ 397.000374] ata1: EH complete [ 1020.880043] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 1020.880050] ata1.00: BMDMA stat 0x24 [ 1020.880055] ata1.00: failed command: READ DMA [ 1020.880062] ata1.00: cmd c8/00:08:48:0c:bf/00:00:00:00:00/e0 tag 0 dma 4096 in res 51/40:03:4b:0c:bf/00:00:00:00:00/e0 Emask 0x9 (media error) [ 1020.880066] ata1.00: status: { DRDY ERR } [ 1020.880068] ata1.00: error: { UNC } [ 1020.896412] ata1.00: configured for UDMA/133 [ 1020.896520] sd 0:0:0:0: [sda] Unhandled sense code [ 1020.896524] sd 0:0:0:0: [sda] [ 1020.896526] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 1020.896529] sd 0:0:0:0: [sda] [ 1020.896531] Sense Key : Medium Error [current] [descriptor] [ 1020.896536] Descriptor sense data with sense descriptors (in hex): [ 1020.896538] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 1020.896549] 00 bf 0c 4b [ 1020.896554] sd 0:0:0:0: [sda] [ 1020.896558] Add. Sense: Unrecovered read error - auto reallocate failed [ 1020.896561] sd 0:0:0:0: [sda] CDB: [ 1020.896563] Read(10): 28 00 00 bf 0c 48 00 00 08 00 [ 1020.896573] end_request: I/O error, dev sda, sector 12520523 [ 1020.896589] ata1: EH complete [ 1024.620042] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 1024.620049] ata1.00: BMDMA stat 0x24 [ 1024.620055] ata1.00: failed command: READ DMA [ 1024.620063] ata1.00: cmd c8/00:08:48:0c:bf/00:00:00:00:00/e0 tag 0 dma 4096 in res 51/40:03:4b:0c:bf/00:00:00:00:00/e0 Emask 0x9 (media error) [ 1024.620066] ata1.00: status: { DRDY ERR } [ 1024.620069] ata1.00: error: { UNC } [ 1024.644263] ata1.00: configured for UDMA/133 [ 1024.644280] sd 0:0:0:0: [sda] Unhandled sense code [ 1024.644283] sd 0:0:0:0: [sda] [ 1024.644285] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 1024.644288] sd 0:0:0:0: [sda] [ 1024.644290] Sense Key : Medium Error [current] [descriptor] [ 1024.644294] Descriptor sense data with sense descriptors (in hex): [ 1024.644296] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 1024.644307] 00 bf 0c 4b [ 1024.644312] sd 0:0:0:0: [sda] [ 1024.644316] Add. Sense: Unrecovered read error - auto reallocate failed [ 1024.644319] sd 0:0:0:0: [sda] CDB: [ 1024.644321] Read(10): 28 00 00 bf 0c 48 00 00 08 00 [ 1024.644331] end_request: I/O error, dev sda, sector 12520523 [ 1024.644348] ata1: EH complete [ 1028.800042] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 1028.800049] ata1.00: BMDMA stat 0x24 [ 1028.800053] ata1.00: failed command: READ DMA [ 1028.800060] ata1.00: cmd c8/00:08:48:0c:bf/00:00:00:00:00/e0 tag 0 dma 4096 in res 51/40:03:4b:0c:bf/00:00:00:00:00/e0 Emask 0x9 (media error) [ 1028.800064] ata1.00: status: { DRDY ERR } [ 1028.800066] ata1.00: error: { UNC } [ 1028.824260] ata1.00: configured for UDMA/133 [ 1028.824278] sd 0:0:0:0: [sda] Unhandled sense code [ 1028.824281] sd 0:0:0:0: [sda] [ 1028.824284] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 1028.824287] sd 0:0:0:0: [sda] [ 1028.824289] Sense Key : Medium Error [current] [descriptor] [ 1028.824293] Descriptor sense data with sense descriptors (in hex): [ 1028.824296] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 1028.824306] 00 bf 0c 4b [ 1028.824311] sd 0:0:0:0: [sda] [ 1028.824316] Add. Sense: Unrecovered read error - auto reallocate failed [ 1028.824319] sd 0:0:0:0: [sda] CDB: [ 1028.824321] Read(10): 28 00 00 bf 0c 48 00 00 08 00 [ 1028.824330] end_request: I/O error, dev sda, sector 12520523 [ 1028.824350] ata1: EH complete [ 1038.680041] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 1038.680048] ata1.00: BMDMA stat 0x24 [ 1038.680053] ata1.00: failed command: READ DMA [ 1038.680061] ata1.00: cmd c8/00:08:48:0c:bf/00:00:00:00:00/e0 tag 0 dma 4096 in res 51/40:03:4b:0c:bf/00:00:00:00:00/e0 Emask 0x9 (media error) [ 1038.680065] ata1.00: status: { DRDY ERR } [ 1038.680067] ata1.00: error: { UNC } [ 1038.696280] ata1.00: configured for UDMA/133 [ 1038.696300] sd 0:0:0:0: [sda] Unhandled sense code [ 1038.696304] sd 0:0:0:0: [sda] [ 1038.696306] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 1038.696309] sd 0:0:0:0: [sda] [ 1038.696311] Sense Key : Medium Error [current] [descriptor] [ 1038.696316] Descriptor sense data with sense descriptors (in hex): [ 1038.696318] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 1038.696329] 00 bf 0c 4b [ 1038.696335] sd 0:0:0:0: [sda] [ 1038.696339] Add. Sense: Unrecovered read error - auto reallocate failed [ 1038.696342] sd 0:0:0:0: [sda] CDB: [ 1038.696344] Read(10): 28 00 00 bf 0c 48 00 00 08 00 [ 1038.696354] end_request: I/O error, dev sda, sector 12520523 [ 1038.696372] ata1: EH complete [ 1043.004048] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 1043.004055] ata1.00: BMDMA stat 0x24 [ 1043.004060] ata1.00: failed command: READ DMA [ 1043.004067] ata1.00: cmd c8/00:08:48:0c:bf/00:00:00:00:00/e0 tag 0 dma 4096 in res 51/40:03:4b:0c:bf/00:00:00:00:00/e0 Emask 0x9 (media error) [ 1043.004071] ata1.00: status: { DRDY ERR } [ 1043.004074] ata1.00: error: { UNC } [ 1043.020277] ata1.00: configured for UDMA/133 [ 1043.020295] sd 0:0:0:0: [sda] Unhandled sense code [ 1043.020298] sd 0:0:0:0: [sda] [ 1043.020301] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 1043.020303] sd 0:0:0:0: [sda] [ 1043.020306] Sense Key : Medium Error [current] [descriptor] [ 1043.020310] Descriptor sense data with sense descriptors (in hex): [ 1043.020312] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 1043.020323] 00 bf 0c 4b [ 1043.020329] sd 0:0:0:0: [sda] [ 1043.020333] Add. Sense: Unrecovered read error - auto reallocate failed [ 1043.020336] sd 0:0:0:0: [sda] CDB: [ 1043.020338] Read(10): 28 00 00 bf 0c 48 00 00 08 00 [ 1043.020348] end_request: I/O error, dev sda, sector 12520523 [ 1043.020367] ata1: EH complete [ 1059.656042] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 1059.656050] ata1.00: BMDMA stat 0x24 [ 1059.656054] ata1.00: failed command: READ DMA [ 1059.656062] ata1.00: cmd c8/00:08:48:0c:bf/00:00:00:00:00/e0 tag 0 dma 4096 in res 51/40:03:4b:0c:bf/00:00:00:00:00/e0 Emask 0x9 (media error) [ 1059.656066] ata1.00: status: { DRDY ERR } [ 1059.656068] ata1.00: error: { UNC } [ 1059.672271] ata1.00: configured for UDMA/133 [ 1059.672293] sd 0:0:0:0: [sda] Unhandled sense code [ 1059.672297] sd 0:0:0:0: [sda] [ 1059.672300] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 1059.672302] sd 0:0:0:0: [sda] [ 1059.672304] Sense Key : Medium Error [current] [descriptor] [ 1059.672309] Descriptor sense data with sense descriptors (in hex): [ 1059.672311] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 1059.672322] 00 bf 0c 4b [ 1059.672327] sd 0:0:0:0: [sda] [ 1059.672331] Add. Sense: Unrecovered read error - auto reallocate failed [ 1059.672334] sd 0:0:0:0: [sda] CDB: [ 1059.672336] Read(10): 28 00 00 bf 0c 48 00 00 08 00 [ 1059.672347] end_request: I/O error, dev sda, sector 12520523 [ 1059.672370] ata1: EH complete [ 1063.452042] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 1063.452049] ata1.00: BMDMA stat 0x24 [ 1063.452054] ata1.00: failed command: READ DMA [ 1063.452061] ata1.00: cmd c8/00:08:48:0c:bf/00:00:00:00:00/e0 tag 0 dma 4096 in res 51/40:03:4b:0c:bf/00:00:00:00:00/e0 Emask 0x9 (media error) [ 1063.452065] ata1.00: status: { DRDY ERR } [ 1063.452068] ata1.00: error: { UNC } [ 1063.476265] ata1.00: configured for UDMA/133 [ 1063.476288] sd 0:0:0:0: [sda] Unhandled sense code [ 1063.476292] sd 0:0:0:0: [sda] [ 1063.476295] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 1063.476297] sd 0:0:0:0: [sda] [ 1063.476299] Sense Key : Medium Error [current] [descriptor] [ 1063.476304] Descriptor sense data with sense descriptors (in hex): [ 1063.476306] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 1063.476317] 00 bf 0c 4b [ 1063.476323] sd 0:0:0:0: [sda] [ 1063.476327] Add. Sense: Unrecovered read error - auto reallocate failed [ 1063.476330] sd 0:0:0:0: [sda] CDB: [ 1063.476332] Read(10): 28 00 00 bf 0c 48 00 00 08 00 [ 1063.476342] end_request: I/O error, dev sda, sector 12520523 [ 1063.476363] ata1: EH complete [ 1067.062443] init: upstart-udev-bridge main process (267) terminated with status 1 [ 1067.062474] init: upstart-udev-bridge main process ended, respawning [ 1067.063228] init: upstart-socket-bridge main process (517) terminated with status 1 [ 1067.063253] init: upstart-socket-bridge main process ended, respawning [ 1067.064535] init: upstart-file-bridge main process (759) terminated with status 1 [ 1067.064562] init: upstart-file-bridge main process ended, respawning [ 1088.708042] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 1088.708050] ata1.00: BMDMA stat 0x24 [ 1088.708054] ata1.00: failed command: READ DMA [ 1088.708062] ata1.00: cmd c8/00:08:48:0c:bf/00:00:00:00:00/e0 tag 0 dma 4096 in res 51/40:03:4b:0c:bf/00:00:00:00:00/e0 Emask 0x9 (media error) [ 1088.708066] ata1.00: status: { DRDY ERR } [ 1088.708068] ata1.00: error: { UNC } [ 1088.724266] ata1.00: configured for UDMA/133 [ 1088.724287] sd 0:0:0:0: [sda] Unhandled sense code [ 1088.724290] sd 0:0:0:0: [sda] [ 1088.724293] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 1088.724296] sd 0:0:0:0: [sda] [ 1088.724298] Sense Key : Medium Error [current] [descriptor] [ 1088.724303] Descriptor sense data with sense descriptors (in hex): [ 1088.724305] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 1088.724316] 00 bf 0c 4b [ 1088.724321] sd 0:0:0:0: [sda] [ 1088.724325] Add. Sense: Unrecovered read error - auto reallocate failed [ 1088.724328] sd 0:0:0:0: [sda] CDB: [ 1088.724330] Read(10): 28 00 00 bf 0c 48 00 00 08 00 [ 1088.724340] end_request: I/O error, dev sda, sector 12520523 [ 1088.724360] ata1: EH complete [ 1092.684043] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 1092.684050] ata1.00: BMDMA stat 0x24 [ 1092.684055] ata1.00: failed command: READ DMA [ 1092.684062] ata1.00: cmd c8/00:08:48:0c:bf/00:00:00:00:00/e0 tag 0 dma 4096 in res 51/40:03:4b:0c:bf/00:00:00:00:00/e0 Emask 0x9 (media error) [ 1092.684066] ata1.00: status: { DRDY ERR } [ 1092.684069] ata1.00: error: { UNC } [ 1092.700265] ata1.00: configured for UDMA/133 [ 1092.700283] sd 0:0:0:0: [sda] Unhandled sense code [ 1092.700287] sd 0:0:0:0: [sda] [ 1092.700289] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 1092.700292] sd 0:0:0:0: [sda] [ 1092.700294] Sense Key : Medium Error [current] [descriptor] [ 1092.700299] Descriptor sense data with sense descriptors (in hex): [ 1092.700301] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 1092.700312] 00 bf 0c 4b [ 1092.700317] sd 0:0:0:0: [sda] [ 1092.700321] Add. Sense: Unrecovered read error - auto reallocate failed [ 1092.700324] sd 0:0:0:0: [sda] CDB: [ 1092.700326] Read(10): 28 00 00 bf 0c 48 00 00 08 00 [ 1092.700336] end_request: I/O error, dev sda, sector 12520523 [ 1092.700354] ata1: EH complete [ 1121.044042] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 1121.044050] ata1.00: BMDMA stat 0x24 [ 1121.044054] ata1.00: failed command: READ DMA [ 1121.044062] ata1.00: cmd c8/00:08:48:0c:bf/00:00:00:00:00/e0 tag 0 dma 4096 in res 51/40:03:4b:0c:bf/00:00:00:00:00/e0 Emask 0x9 (media error) [ 1121.044066] ata1.00: status: { DRDY ERR } [ 1121.044068] ata1.00: error: { UNC } [ 1121.060277] ata1.00: configured for UDMA/133 [ 1121.060298] sd 0:0:0:0: [sda] Unhandled sense code [ 1121.060302] sd 0:0:0:0: [sda] [ 1121.060305] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 1121.060307] sd 0:0:0:0: [sda] [ 1121.060310] Sense Key : Medium Error [current] [descriptor] [ 1121.060314] Descriptor sense data with sense descriptors (in hex): [ 1121.060316] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 1121.060328] 00 bf 0c 4b [ 1121.060333] sd 0:0:0:0: [sda] [ 1121.060337] Add. Sense: Unrecovered read error - auto reallocate failed [ 1121.060340] sd 0:0:0:0: [sda] CDB: [ 1121.060342] Read(10): 28 00 00 bf 0c 48 00 00 08 00 [ 1121.060353] end_request: I/O error, dev sda, sector 12520523 [ 1121.060373] ata1: EH complete [ 1124.800042] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 1124.800050] ata1.00: BMDMA stat 0x24 [ 1124.800055] ata1.00: failed command: READ DMA [ 1124.800062] ata1.00: cmd c8/00:08:48:0c:bf/00:00:00:00:00/e0 tag 0 dma 4096 in res 51/40:03:4b:0c:bf/00:00:00:00:00/e0 Emask 0x9 (media error) [ 1124.800066] ata1.00: status: { DRDY ERR } [ 1124.800068] ata1.00: error: { UNC } [ 1124.816262] ata1.00: configured for UDMA/133 [ 1124.816281] sd 0:0:0:0: [sda] Unhandled sense code [ 1124.816284] sd 0:0:0:0: [sda] [ 1124.816287] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 1124.816289] sd 0:0:0:0: [sda] [ 1124.816292] Sense Key : Medium Error [current] [descriptor] [ 1124.816296] Descriptor sense data with sense descriptors (in hex): [ 1124.816298] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 1124.816309] 00 bf 0c 4b [ 1124.816315] sd 0:0:0:0: [sda] [ 1124.816319] Add. Sense: Unrecovered read error - auto reallocate failed [ 1124.816322] sd 0:0:0:0: [sda] CDB: [ 1124.816324] Read(10): 28 00 00 bf 0c 48 00 00 08 00 [ 1124.816334] end_request: I/O error, dev sda, sector 12520523 [ 1124.816353] ata1: EH complete [ 1166.344041] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 1166.344049] ata1.00: BMDMA stat 0x24 [ 1166.344054] ata1.00: failed command: READ DMA [ 1166.344061] ata1.00: cmd c8/00:08:48:0c:bf/00:00:00:00:00/e0 tag 0 dma 4096 in res 51/40:03:4b:0c:bf/00:00:00:00:00/e0 Emask 0x9 (media error) [ 1166.344065] ata1.00: status: { DRDY ERR } [ 1166.344068] ata1.00: error: { UNC } [ 1166.360268] ata1.00: configured for UDMA/133 [ 1166.360290] sd 0:0:0:0: [sda] Unhandled sense code [ 1166.360293] sd 0:0:0:0: [sda] [ 1166.360296] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 1166.360299] sd 0:0:0:0: [sda] [ 1166.360301] Sense Key : Medium Error [current] [descriptor] [ 1166.360306] Descriptor sense data with sense descriptors (in hex): [ 1166.360308] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 1166.360319] 00 bf 0c 4b [ 1166.360324] sd 0:0:0:0: [sda] [ 1166.360328] Add. Sense: Unrecovered read error - auto reallocate failed [ 1166.360331] sd 0:0:0:0: [sda] CDB: [ 1166.360333] Read(10): 28 00 00 bf 0c 48 00 00 08 00 [ 1166.360343] end_request: I/O error, dev sda, sector 12520523 [ 1166.360364] ata1: EH complete [ 1170.284043] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 1170.284050] ata1.00: BMDMA stat 0x24 [ 1170.284055] ata1.00: failed command: READ DMA [ 1170.284062] ata1.00: cmd c8/00:08:48:0c:bf/00:00:00:00:00/e0 tag 0 dma 4096 in res 51/40:03:4b:0c:bf/00:00:00:00:00/e0 Emask 0x9 (media error) [ 1170.284066] ata1.00: status: { DRDY ERR } [ 1170.284068] ata1.00: error: { UNC } [ 1170.300257] ata1.00: configured for UDMA/133 [ 1170.300276] sd 0:0:0:0: [sda] Unhandled sense code [ 1170.300279] sd 0:0:0:0: [sda] [ 1170.300282] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 1170.300285] sd 0:0:0:0: [sda] [ 1170.300287] Sense Key : Medium Error [current] [descriptor] [ 1170.300291] Descriptor sense data with sense descriptors (in hex): [ 1170.300293] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 1170.300304] 00 bf 0c 4b [ 1170.300309] sd 0:0:0:0: [sda] [ 1170.300314] Add. Sense: Unrecovered read error - auto reallocate failed [ 1170.300317] sd 0:0:0:0: [sda] CDB: [ 1170.300319] Read(10): 28 00 00 bf 0c 48 00 00 08 00 [ 1170.300329] end_request: I/O error, dev sda, sector 12520523 [ 1170.300349] ata1: EH complete [ 1560.509507] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 1560.545238] JFS: nTxBlock = 8028, nTxLock = 64224 [ 1560.655064] ntfs: driver 2.1.30 [Flags: R/O MODULE]. [ 1560.864018] QNX4 filesystem 0.2.3 registered. [ 1561.280011] raid6: mmxx1 1893 MB/s [ 1561.348028] raid6: mmxx2 2193 MB/s [ 1561.416036] raid6: sse1x1 1079 MB/s [ 1561.484031] raid6: sse1x2 2131 MB/s [ 1561.552008] raid6: sse2x1 2241 MB/s [ 1561.620014] raid6: sse2x2 3193 MB/s [ 1561.620017] raid6: using algorithm sse2x2 (3193 MB/s) [ 1561.620019] raid6: using intx1 recovery algorithm [ 1561.647834] xor: measuring software checksum speed [ 1561.684008] pIII_sse : 4317.000 MB/sec [ 1561.724007] prefetch64-sse: 4353.000 MB/sec [ 1561.724010] xor: using function: prefetch64-sse (4353.000 MB/sec) [ 1562.173790] Btrfs loaded [ 1564.217930] init: systemd-logind main process (749) killed by TERM signal [ 1856.104050] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 1856.104059] ata1.00: failed command: READ DMA [ 1856.104067] ata1.00: cmd c8/00:00:d0:91:0e/00:00:00:00:00/e1 tag 0 dma 131072 in res 40/00:03:4b:0c:bf/00:00:00:00:00/e0 Emask 0x4 (timeout) [ 1856.104071] ata1.00: status: { DRDY } [ 1861.144026] ata1: link is slow to respond, please be patient (ready=0) [ 1866.128025] ata1: device not ready (errno=-16), forcing hardreset [ 1866.128036] ata1: soft resetting link [ 1866.412262] ata1.00: configured for UDMA/133 [ 1866.412279] ata1: EH complete [ 1897.064054] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 1897.064063] ata1.00: failed command: READ DMA [ 1897.064072] ata1.00: cmd c8/00:00:d0:91:0e/00:00:00:00:00/e1 tag 0 dma 131072 in res 40/00:03:4b:0c:bf/00:00:00:00:00/e0 Emask 0x4 (timeout) [ 1897.064076] ata1.00: status: { DRDY } [ 1900.256030] ata1: soft resetting link [ 1900.436264] ata1.00: configured for UDMA/133 [ 1900.436281] ata1: EH complete [ 1934.916042] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 1934.916050] ata1.00: BMDMA stat 0x24 [ 1934.916055] ata1.00: failed command: READ DMA [ 1934.916063] ata1.00: cmd c8/00:00:d0:95:0e/00:00:00:00:00/e1 tag 0 dma 131072 in res 51/40:78:48:96:0e/00:00:00:00:00/e1 Emask 0x9 (media error) [ 1934.916067] ata1.00: status: { DRDY ERR } [ 1934.916069] ata1.00: error: { UNC } [ 1934.932262] ata1.00: configured for UDMA/133 [ 1934.932283] sd 0:0:0:0: [sda] Unhandled sense code [ 1934.932287] sd 0:0:0:0: [sda] [ 1934.932289] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 1934.932292] sd 0:0:0:0: [sda] [ 1934.932294] Sense Key : Medium Error [current] [descriptor] [ 1934.932298] Descriptor sense data with sense descriptors (in hex): [ 1934.932301] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 1934.932311] 01 0e 96 48 [ 1934.932317] sd 0:0:0:0: [sda] [ 1934.932321] Add. Sense: Unrecovered read error - auto reallocate failed [ 1934.932324] sd 0:0:0:0: [sda] CDB: [ 1934.932326] Read(10): 28 00 01 0e 95 d0 00 01 00 00 [ 1934.932336] end_request: I/O error, dev sda, sector 17733192 [ 1934.932357] ata1: EH complete [ 1947.636035] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 1947.636042] ata1.00: BMDMA stat 0x24 [ 1947.636047] ata1.00: failed command: READ DMA [ 1947.636054] ata1.00: cmd c8/00:08:18:96:0e/00:00:00:00:00/e1 tag 0 dma 4096 in res 51/40:07:1f:96:0e/00:00:00:00:00/e1 Emask 0x9 (media error) [ 1947.636058] ata1.00: status: { DRDY ERR } [ 1947.636061] ata1.00: error: { UNC } [ 1947.652268] ata1.00: configured for UDMA/133 [ 1947.652290] sd 0:0:0:0: [sda] Unhandled sense code [ 1947.652294] sd 0:0:0:0: [sda] [ 1947.652296] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 1947.652299] sd 0:0:0:0: [sda] [ 1947.652301] Sense Key : Medium Error [current] [descriptor] [ 1947.652306] Descriptor sense data with sense descriptors (in hex): [ 1947.652308] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 1947.652319] 01 0e 96 1f [ 1947.652324] sd 0:0:0:0: [sda] [ 1947.652329] Add. Sense: Unrecovered read error - auto reallocate failed [ 1947.652332] sd 0:0:0:0: [sda] CDB: [ 1947.652334] Read(10): 28 00 01 0e 96 18 00 00 08 00 [ 1947.652344] end_request: I/O error, dev sda, sector 17733151 [ 1947.652364] ata1: EH complete [ 1951.644041] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 1951.644048] ata1.00: BMDMA stat 0x24 [ 1951.644053] ata1.00: failed command: READ DMA [ 1951.644060] ata1.00: cmd c8/00:08:18:96:0e/00:00:00:00:00/e1 tag 0 dma 4096 in res 51/40:07:1f:96:0e/00:00:00:00:00/e1 Emask 0x9 (media error) [ 1951.644064] ata1.00: status: { DRDY ERR } [ 1951.644067] ata1.00: error: { UNC } [ 1951.668280] ata1.00: configured for UDMA/133 [ 1951.668302] sd 0:0:0:0: [sda] Unhandled sense code [ 1951.668305] sd 0:0:0:0: [sda] [ 1951.668312] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 1951.668316] sd 0:0:0:0: [sda] [ 1951.668318] Sense Key : Medium Error [current] [descriptor] [ 1951.668323] Descriptor sense data with sense descriptors (in hex): [ 1951.668325] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 1951.668336] 01 0e 96 1f [ 1951.668341] sd 0:0:0:0: [sda] [ 1951.668345] Add. Sense: Unrecovered read error - auto reallocate failed [ 1951.668348] sd 0:0:0:0: [sda] CDB: [ 1951.668350] Read(10): 28 00 01 0e 96 18 00 00 08 00 [ 1951.668360] end_request: I/O error, dev sda, sector 17733151 [ 1951.668380] ata1: EH complete [ 2033.524039] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 2033.524046] ata1.00: BMDMA stat 0x24 [ 2033.524051] ata1.00: failed command: READ DMA [ 2033.524058] ata1.00: cmd c8/00:00:00:52:c6/00:00:00:00:00/e0 tag 0 dma 131072 in res 51/40:74:74:52:c6/00:00:00:00:00/e0 Emask 0x9 (media error) [ 2033.524062] ata1.00: status: { DRDY ERR } [ 2033.524065] ata1.00: error: { UNC } [ 2033.548263] ata1.00: configured for UDMA/133 [ 2033.548283] sd 0:0:0:0: [sda] Unhandled sense code [ 2033.548286] sd 0:0:0:0: [sda] [ 2033.548289] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 2033.548292] sd 0:0:0:0: [sda] [ 2033.548294] Sense Key : Medium Error [current] [descriptor] [ 2033.548299] Descriptor sense data with sense descriptors (in hex): [ 2033.548301] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 2033.548312] 00 c6 52 74 [ 2033.548317] sd 0:0:0:0: [sda] [ 2033.548322] Add. Sense: Unrecovered read error - auto reallocate failed [ 2033.548324] sd 0:0:0:0: [sda] CDB: [ 2033.548326] Read(10): 28 00 00 c6 52 00 00 01 00 00 [ 2033.548337] end_request: I/O error, dev sda, sector 12997236 [ 2033.548360] ata1: EH complete [ 2064.744043] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 2064.744050] ata1.00: BMDMA stat 0x24 [ 2064.744055] ata1.00: failed command: READ DMA [ 2064.744062] ata1.00: cmd c8/00:08:70:52:c6/00:00:00:00:00/e0 tag 0 dma 4096 in res 51/40:07:77:52:c6/00:00:00:00:00/e0 Emask 0x9 (media error) [ 2064.744066] ata1.00: status: { DRDY ERR } [ 2064.744069] ata1.00: error: { UNC } [ 2064.760261] ata1.00: configured for UDMA/133 [ 2064.760282] sd 0:0:0:0: [sda] Unhandled sense code [ 2064.760286] sd 0:0:0:0: [sda] [ 2064.760288] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 2064.760291] sd 0:0:0:0: [sda] [ 2064.760293] Sense Key : Medium Error [current] [descriptor] [ 2064.760298] Descriptor sense data with sense descriptors (in hex): [ 2064.760300] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 2064.760311] 00 c6 52 77 [ 2064.760316] sd 0:0:0:0: [sda] [ 2064.760321] Add. Sense: Unrecovered read error - auto reallocate failed [ 2064.760323] sd 0:0:0:0: [sda] CDB: [ 2064.760325] Read(10): 28 00 00 c6 52 70 00 00 08 00 [ 2064.760336] end_request: I/O error, dev sda, sector 12997239 [ 2064.760354] ata1: EH complete [ 2222.637792] init: cron main process (925) killed by TERM signal [ 2787.592749] perf interrupt took too long (2507 > 2500), lowering kernel.perf_event_max_sample_rate to 50000 [ 3448.336041] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 3448.336049] ata1.00: BMDMA stat 0x24 [ 3448.336053] ata1.00: failed command: READ DMA [ 3448.336061] ata1.00: cmd c8/00:00:40:df:eb/00:00:00:00:00/e0 tag 0 dma 131072 in res 51/40:6a:aa:df:eb/00:00:00:00:00/e0 Emask 0x9 (media error) [ 3448.336065] ata1.00: status: { DRDY ERR } [ 3448.336067] ata1.00: error: { UNC } [ 3448.352285] ata1.00: configured for UDMA/133 [ 3448.352309] sd 0:0:0:0: [sda] Unhandled sense code [ 3448.352313] sd 0:0:0:0: [sda] [ 3448.352315] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 3448.352318] sd 0:0:0:0: [sda] [ 3448.352320] Sense Key : Medium Error [current] [descriptor] [ 3448.352325] Descriptor sense data with sense descriptors (in hex): [ 3448.352327] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 3448.352338] 00 eb df aa [ 3448.352343] sd 0:0:0:0: [sda] [ 3448.352348] Add. Sense: Unrecovered read error - auto reallocate failed [ 3448.352350] sd 0:0:0:0: [sda] CDB: [ 3448.352352] Read(10): 28 00 00 eb df 40 00 01 00 00 [ 3448.352363] end_request: I/O error, dev sda, sector 15458218 [ 3448.352388] ata1: EH complete [ 3452.584039] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 3452.584046] ata1.00: BMDMA stat 0x24 [ 3452.584051] ata1.00: failed command: READ DMA [ 3452.584058] ata1.00: cmd c8/00:08:a8:df:eb/00:00:00:00:00/e0 tag 0 dma 4096 in res 51/40:02:aa:df:eb/00:00:00:00:00/e0 Emask 0x9 (media error) [ 3452.584062] ata1.00: status: { DRDY ERR } [ 3452.584065] ata1.00: error: { UNC } [ 3452.600268] ata1.00: configured for UDMA/133 [ 3452.600290] sd 0:0:0:0: [sda] Unhandled sense code [ 3452.600294] sd 0:0:0:0: [sda] [ 3452.600296] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 3452.600299] sd 0:0:0:0: [sda] [ 3452.600301] Sense Key : Medium Error [current] [descriptor] [ 3452.600306] Descriptor sense data with sense descriptors (in hex): [ 3452.600308] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 3452.600319] 00 eb df aa [ 3452.600325] sd 0:0:0:0: [sda] [ 3452.600329] Add. Sense: Unrecovered read error - auto reallocate failed [ 3452.600332] sd 0:0:0:0: [sda] CDB: [ 3452.600334] Read(10): 28 00 00 eb df a8 00 00 08 00 [ 3452.600344] end_request: I/O error, dev sda, sector 15458218 [ 3452.600365] ata1: EH complete [ 3456.304043] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 3456.304050] ata1.00: BMDMA stat 0x24 [ 3456.304055] ata1.00: failed command: READ DMA [ 3456.304062] ata1.00: cmd c8/00:08:a8:df:eb/00:00:00:00:00/e0 tag 0 dma 4096 in res 51/40:02:aa:df:eb/00:00:00:00:00/e0 Emask 0x9 (media error) [ 3456.304066] ata1.00: status: { DRDY ERR } [ 3456.304068] ata1.00: error: { UNC } [ 3456.328262] ata1.00: configured for UDMA/133 [ 3456.328283] sd 0:0:0:0: [sda] Unhandled sense code [ 3456.328286] sd 0:0:0:0: [sda] [ 3456.328289] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 3456.328291] sd 0:0:0:0: [sda] [ 3456.328294] Sense Key : Medium Error [current] [descriptor] [ 3456.328298] Descriptor sense data with sense descriptors (in hex): [ 3456.328300] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 3456.328311] 00 eb df aa [ 3456.328316] sd 0:0:0:0: [sda] [ 3456.328321] Add. Sense: Unrecovered read error - auto reallocate failed [ 3456.328324] sd 0:0:0:0: [sda] CDB: [ 3456.328326] Read(10): 28 00 00 eb df a8 00 00 08 00 [ 3456.328336] end_request: I/O error, dev sda, sector 15458218 [ 3456.328357] ata1: EH complete